summaryrefslogtreecommitdiff
path: root/recipes/u-boot/u-boot-git/beagleboard
ModeNameSize
-rw-r--r--0001-OMAP-mmc-add-support-for-second-and-third-mmc-chan.patch3465logplain
-rw-r--r--0001-OMAP3-Beagle-enable-support-for-second-and-third-m.patch1763logplain
-rw-r--r--0001-OMAP3-enable-i2c-bus-switching-for-Beagle-and-Overo.patch1419logplain
-rw-r--r--0002-OMAP3-add-board-revision-detection-for-Overo.patch6786logplain
-rw-r--r--0003-OMAP3-update-Beagle-revision-detection-to-recognize-.patch4718logplain
-rw-r--r--0004-OMAP3-Set-VAUX2-to-1.8V-for-EHCI-PHY-on-Beagle-Rev-C.patch4127logplain
-rw-r--r--0005-OMAP3-add-entry-for-rev-3.1.2-check-and-display-max-.patch3158logplain
-rw-r--r--0006-OMAP3-add-mpurate-boot-arg-for-overo-and-beagle.patch2176logplain
-rw-r--r--0007-OMAP3-detect-expansion-board-type-version-using-eepr.patch3866logplain
-rw-r--r--0008-OMAP3-Overo-enable-config-eeprom-to-set-u-boot-env-v.patch2979logplain
-rw-r--r--0009-OMAP3-Overo-enable-input-on-MMC1_CLK-and-MMC3_CLK-pi.patch1596logplain
-rw-r--r--0010-OMAP3-Overo-set-CONFIG_SYS_I2C_SPEED-to-400Khz.patch765logplain
-rw-r--r--0011-OMAP3-trim-excessively-long-delays-in-i2c-driver.patch1731logplain
-rw-r--r--0012-OMAP3-Overo-allow-expansion-boards-with-any-vendor-I.patch1339logplain
-rw-r--r--0013-OMAP3-Overo-change-address-of-expansion-eeprom-to-0x.patch731logplain
-rw-r--r--0014-OMAP3-board.c-don-t-attempt-to-set-up-second-RAM-ban.patch1511logplain
-rw-r--r--0015-OMAP3-mem.c-enhance-the-RAM-test.patch1480logplain
-rw-r--r--0016-env_nand.c-fail-gracefully-if-no-nand-is-present.patch698logplain
-rw-r--r--0017-OMAP3-add-definitions-to-support-sysinfo-cpu-and-cpu.patch1878logplain
-rw-r--r--0018-OMAP3-sys_info-update-cpu-detection-for-36XX-37XX.patch4464logplain
-rw-r--r--0019-OMAP3-clocks-update-clock-setup-for-36XX-37XX.patch26550logplain
-rw-r--r--0020-OMAP3-beagle-add-support-for-Beagle-xM.patch5324logplain
-rw-r--r--0021-OMAP3-Beagle-Overo-remove-omapfb.debug-y-from-defaul.patch1668logplain
-rw-r--r--0022-OMAP3-beagle-implement-expansionboard-detection-base.patch6028logplain
-rw-r--r--0023-beagleboard-display-message-about-I2C-errors-being-e.patch905logplain
-rw-r--r--0024-beagleboard-fix-TCT-expansionboard-IDs.patch802logplain
-rw-r--r--0025-Add-DSS-driver-for-OMAP3.patch11603logplain
-rw-r--r--0026-Enable-DSS-driver-for-Beagle.patch4830logplain
-rw-r--r--0027-beagleboardXM-don-t-set-mpurate-on-xM-in-bootargs.patch757logplain
-rw-r--r--0028-OMAP3-fix-and-clean-up-L2-cache-enable-disable-funct.patch3017logplain
-rw-r--r--0029-OMAP3-convert-setup_auxcr-to-pure-asm.patch3465logplain
-rw-r--r--0030-OMAP3-apply-Cortex-A8-errata-workarounds-only-on-aff.patch1628logplain
-rw-r--r--0031-OMAP3-beagle-add-more-expansionboards-based-on-http-.patch2148logplain
-rw-r--r--0032-OMAP3-beagle-set-mpurate-to-600-for-revB-and-revC1-3.patch825logplain
-rw-r--r--0033-OMAP3-beagle-prettify-expansionboard-message-a-bit.patch826logplain
-rw-r--r--0034-OMAP3-beagle-add-pinmux-for-Tincantools-Trainer-expa.patch2467logplain
-rw-r--r--0035-OMAP3-Beagle-set-mpurate-to-1000-for-xM.patch749logplain
-rw-r--r--0036-OMAP3-Beagle-decrease-bootdelay-to-3-use-VGA-for-def.patch995logplain
-rw-r--r--0037-OMAP3-beagle-pass-expansionboard-name-in-bootargs.patch3012logplain
-rw-r--r--0038-Added-configurations-for-xM-Rev-A-board.patch1233logplain
-rw-r--r--0038-BeagleBoard-Added-LED-driver.patch4388logplain
-rw-r--r--0039-Add-led-command.patch6323logplain
-rw-r--r--0039-OMAP3-beagle-setenv-beaglerev-for-AxBx-Cx-xMA-for-be.patch1287logplain
-rw-r--r--0040-BeagleBoard-Check-for-ramdisk-on-boot.patch2967logplain
-rw-r--r--0041-BeagleBoard-Enabled-LEDs.patch1558logplain
-rw-r--r--0042-BeagleBoard-New-command-for-status-of-USER-button.patch2421logplain
-rw-r--r--0043-BeagleBoard-Add-CONFIG_SYS_MEMTEST_SCRATCH.patch1258logplain
-rw-r--r--0044-Beagleboard-Adjust-boot.patch3541logplain
-rw-r--r--0045-BeagleBoard-Enable-pullups-on-i2c2.patch1637logplain
-rw-r--r--0046-BeagleBoard-Add-camera-to-default-bootargs.patch1383logplain