diff options
29 files changed, 1353 insertions, 17974 deletions
diff --git a/conf/distro/slugos.conf b/conf/distro/slugos.conf index 3b094d769d..2273aca31a 100644 --- a/conf/distro/slugos.conf +++ b/conf/distro/slugos.conf @@ -170,7 +170,7 @@ PREFERRED_VERSION_glibc ?= "2.3.5+cvs20050627" # Select the correct versions of the kernel and modules (these are the # defaults, override in the conf/distro top-level distro file). PREFERRED_PROVIDER_virtual/kernel ?= "ixp4xx-kernel" -PREFERRED_VERSION_ixp4xx-kernel ?= "2.6.15.2" +PREFERRED_VERSION_ixp4xx-kernel ?= "2.6.16-rc4-git5" # Built-in ethernet modules PREFERRED_PROVIDER_virtual/ixp-eth ?= "ixp400-eth" diff --git a/packages/linux/ixp4xx-kernel.inc b/packages/linux/ixp4xx-kernel.inc index 41ff745e71..52f216438a 100644 --- a/packages/linux/ixp4xx-kernel.inc +++ b/packages/linux/ixp4xx-kernel.inc @@ -297,6 +297,20 @@ pkg_postrm_kernel-image-nas100d () { update-alternatives --remove ${KERNEL_IMAGETYPE} /${KERNEL_IMAGEDEST}/${KERNEL_IMAGETYPE}-nas100d${ARCH_BYTE_SEX}-${KERNEL_RELEASE} || true } +# The correct settings for the DSMG600 board: +dsmg600_MACHID = "964" +PACKAGES += "kernel-image-dsmg600" +PKG_kernel-image-dsmg600 = "kernel-image-${KERNEL_VERSION}" +PACKAGE_ARCH_kernel-image-dsmg600 = "dsmg600${ARCH_BYTE_SEX}" +DESCRIPTION_kernel-image-dsmg600 = "Linux kernel for the D-Link DSM-G600" +FILES_kernel-image-dsmg600 = "/${KERNEL_IMAGEDEST}/${KERNEL_IMAGETYPE}-dsmg600${ARCH_BYTE_SEX}-${KERNEL_RELEASE}" +pkg_postinst_kernel-image-dsmg600 () { + update-alternatives --install /${KERNEL_IMAGEDEST}/${KERNEL_IMAGETYPE} ${KERNEL_IMAGETYPE} /${KERNEL_IMAGEDEST}/${KERNEL_IMAGETYPE}-dsmg600${ARCH_BYTE_SEX}-${KERNEL_RELEASE} ${KERNEL_PRIORITY} || true +} +pkg_postrm_kernel-image-dsmg600 () { + update-alternatives --remove ${KERNEL_IMAGETYPE} /${KERNEL_IMAGEDEST}/${KERNEL_IMAGETYPE}-dsmg600${ARCH_BYTE_SEX}-${KERNEL_RELEASE} || true +} + #FIXUP: the correct instructions to copy the kernel prepended with the le fixup #FIXME: do a fixup for BE too... FIXUP_armeb = "cp$" @@ -345,6 +359,7 @@ do_install_append() { install_image 'ds101${ARCH_BYTE_SEX}' '${ds101_MACHID}' install_image 'loft${ARCH_BYTE_SEX}' '${loft_MACHID}' install_image 'nas100d${ARCH_BYTE_SEX}' '${nas100d_MACHID}' + install_image 'dsmg600${ARCH_BYTE_SEX}' '${dsmg600_MACHID}' } do_deploy[dirs] = "${S}" @@ -362,6 +377,7 @@ do_deploy() { deploy_image 'ds101${ARCH_BYTE_SEX}' '${ds101_MACHID}' deploy_image 'loft${ARCH_BYTE_SEX}' '${loft_MACHID}' deploy_image 'nas100d${ARCH_BYTE_SEX}' '${nas100d_MACHID}' + deploy_image 'dsmg600${ARCH_BYTE_SEX}' '${dsmg600_MACHID}' } addtask deploy before do_build after do_compile diff --git a/packages/linux/ixp4xx-kernel/2.6.16/05-patch-2.6.16-rc2-ide2 b/packages/linux/ixp4xx-kernel/2.6.16/05-patch-2.6.16-rc2-ide2 deleted file mode 100644 index 3ea46331f6..0000000000 --- a/packages/linux/ixp4xx-kernel/2.6.16/05-patch-2.6.16-rc2-ide2 +++ /dev/null @@ -1,16885 +0,0 @@ -diff -u --exclude-from /usr/src/exclude --new-file --recursive linux.vanilla-2.6.16-rc2/arch/i386/pci/fixup.c linux-2.6.16-rc2/arch/i386/pci/fixup.c ---- linux.vanilla-2.6.16-rc2/arch/i386/pci/fixup.c 2006-02-06 12:21:33.000000000 +0000 -+++ linux-2.6.16-rc2/arch/i386/pci/fixup.c 2006-02-01 14:49:17.000000000 +0000 -@@ -74,52 +74,6 @@ - } - DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NCR, PCI_DEVICE_ID_NCR_53C810, pci_fixup_ncr53c810); - --static void __devinit pci_fixup_ide_bases(struct pci_dev *d) --{ -- int i; -- -- /* -- * PCI IDE controllers use non-standard I/O port decoding, respect it. -- */ -- if ((d->class >> 8) != PCI_CLASS_STORAGE_IDE) -- return; -- DBG("PCI: IDE base address fixup for %s\n", pci_name(d)); -- for(i=0; i<4; i++) { -- struct resource *r = &d->resource[i]; -- if ((r->start & ~0x80) == 0x374) { -- r->start |= 2; -- r->end = r->start; -- } -- } --} --DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pci_fixup_ide_bases); -- --static void __devinit pci_fixup_ide_trash(struct pci_dev *d) --{ -- int i; -- -- /* -- * Runs the fixup only for the first IDE controller -- * (Shai Fultheim - shai@ftcon.com) -- */ -- static int called = 0; -- if (called) -- return; -- called = 1; -- -- /* -- * There exist PCI IDE controllers which have utter garbage -- * in first four base registers. Ignore that. -- */ -- DBG("PCI: IDE base address trash cleared for %s\n", pci_name(d)); -- for(i=0; i<4; i++) -- d->resource[i].start = d->resource[i].end = d->resource[i].flags = 0; --} --DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_5513, pci_fixup_ide_trash); --DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_10, pci_fixup_ide_trash); --DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_11, pci_fixup_ide_trash); --DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_9, pci_fixup_ide_trash); -- - static void __devinit pci_fixup_latency(struct pci_dev *d) - { - /* -diff -u --exclude-from /usr/src/exclude --new-file --recursive linux.vanilla-2.6.16-rc2/drivers/cdrom/cdrom.c linux-2.6.16-rc2/drivers/cdrom/cdrom.c ---- linux.vanilla-2.6.16-rc2/drivers/cdrom/cdrom.c 2006-02-06 12:21:34.000000000 +0000 -+++ linux-2.6.16-rc2/drivers/cdrom/cdrom.c 2006-01-17 16:34:19.000000000 +0000 -@@ -1131,7 +1131,8 @@ - This ensures that the drive gets unlocked after a mount fails. This - is a goto to avoid bloating the driver with redundant code. */ - clean_up_and_return: -- cdinfo(CD_OPEN, "open failed.\n"); -+ /* Don't log this, its a perfectly normal user occurence */ -+ /* cdinfo(CD_WARNING, "open failed.\n"); */ - if (CDROM_CAN(CDC_LOCK) && cdi->options & CDO_LOCK) { - cdo->lock_door(cdi, 0); - cdinfo(CD_OPEN, "door unlocked.\n"); -diff -u --exclude-from /usr/src/exclude --new-file --recursive linux.vanilla-2.6.16-rc2/drivers/pci/probe.c linux-2.6.16-rc2/drivers/pci/probe.c ---- linux.vanilla-2.6.16-rc2/drivers/pci/probe.c 2006-02-06 12:21:35.000000000 +0000 -+++ linux-2.6.16-rc2/drivers/pci/probe.c 2006-02-01 15:56:28.000000000 +0000 -@@ -627,6 +627,7 @@ - static int pci_setup_device(struct pci_dev * dev) - { - u32 class; -+ u16 cmd; - - sprintf(pci_name(dev), "%04x:%02x:%02x.%d", pci_domain_nr(dev->bus), - dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn)); -@@ -654,6 +655,31 @@ - pci_read_bases(dev, 6, PCI_ROM_ADDRESS); - pci_read_config_word(dev, PCI_SUBSYSTEM_VENDOR_ID, &dev->subsystem_vendor); - pci_read_config_word(dev, PCI_SUBSYSTEM_ID, &dev->subsystem_device); -+ -+ /* -+ * Do the ugly legacy mode stuff here rather than broken chip -+ * quirk code. Legacy mode ATA controllers have fixed -+ * addresses. These are not always echoed in BAR0-3, and -+ * BAR0-3 in a few cases contain junk! -+ */ -+ if (class == PCI_CLASS_STORAGE_IDE) { -+ u8 progif; -+ pci_read_config_byte(dev, PCI_CLASS_PROG, &progif); -+ if ((progif & 5) != 5) { -+ dev->resource[0].start = 0x1F0; -+ dev->resource[0].end = 0x1F7; -+ dev->resource[0].flags = IORESOURCE_IO; -+ dev->resource[1].start = 0x3F6; -+ dev->resource[1].end = 0x3F6; -+ dev->resource[1].flags = IORESOURCE_IO; -+ dev->resource[2].start = 0x170; -+ dev->resource[2].end = 0x177; -+ dev->resource[2].flags = IORESOURCE_IO; -+ dev->resource[3].start = 0x376; -+ dev->resource[3].end = 0x376; -+ dev->resource[3].flags = IORESOURCE_IO; -+ } -+ } - break; - - case PCI_HEADER_TYPE_BRIDGE: /* bridge header */ -@@ -687,6 +713,10 @@ - dev->class = PCI_CLASS_NOT_DEFINED; - } - -+ /* BIOS enabled, so assume there is a good reason */ -+ pci_read_config_word(dev, PCI_COMMAND, &cmd); -+ if(cmd & PCI_COMMAND_MASTER) -+ dev->is_enabled = 1; - /* We found a fine healthy device, go go go... */ - return 0; - } -diff -u --exclude-from /usr/src/exclude --new-file --recursive linux.vanilla-2.6.16-rc2/drivers/scsi/ata_generic.c linux-2.6.16-rc2/drivers/scsi/ata_generic.c ---- linux.vanilla-2.6.16-rc2/drivers/scsi/ata_generic.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.16-rc2/drivers/scsi/ata_generic.c 2006-02-07 13:47:27.337665568 +0000 -@@ -0,0 +1,242 @@ -+/* -+ * ata_generic.c - Generic PATA/SATA controller driver. -+ * Copyright 2005 Red Hat Inc <alan@redhat.com>, all rights reserved. -+ * -+ * Elements from ide/pci/generic.c -+ * Copyright (C) 2001-2002 Andre Hedrick <andre@linux-ide.org> -+ * Portions (C) Copyright 2002 Red Hat Inc <alan@redhat.com> -+ * -+ * May be copied or modified under the terms of the GNU General Public License -+ * -+ * Driver for PCI IDE interfaces implementing the standard bus mastering -+ * interface functionality. This assumes the BIOS did the drive set up and -+ * tuning for us. By default we do not grab all IDE class devices as they -+ * may have other drivers or need fixups to avoid problems. Instead we keep -+ * a default list of stuff without documentation/driver that appears to -+ * work. -+ */ -+ -+#include <linux/kernel.h> -+#include <linux/module.h> -+#include <linux/pci.h> -+#include <linux/init.h> -+#include <linux/blkdev.h> -+#include <linux/delay.h> -+#include "scsi.h" -+#include <scsi/scsi_host.h> -+#include <linux/libata.h> -+ -+#define DRV_NAME "generic" -+#define DRV_VERSION "0.1" -+ -+/* -+ * A generic parallel ATA driver using libata -+ */ -+ -+static void genpata_phy_reset(struct ata_port *ap) -+{ -+ /* We know the BIOS already did the mode work. Don't tempt any -+ one else to "fix" things */ -+ ap->cbl = ATA_CBL_PATA80; -+ ata_port_probe(ap); -+ ata_bus_reset(ap); -+} -+ -+/** -+ * genpata_set_mode - mode setting -+ * @ap: interface to set up -+ * -+ * Use a non standard set_mode function. We don't want to be tuned. -+ * The BIOS configured everything. Our job is not to fiddle. We -+ * read the dma enabled bits from the PCI configuration of the device -+ * and respect them. -+ */ -+ -+static void genpata_set_mode(struct ata_port *ap) -+{ -+ int dma_enabled; -+ int i; -+ -+ /* Bits 5 and 6 indicate if DMA is active on master/slave */ -+ dma_enabled = inb(ap->ioaddr.bmdma_addr + ATA_DMA_CMD); -+ -+ for (i = 0; i < ATA_MAX_DEVICES; i++) { -+ struct ata_device *dev = &ap->device[i]; -+ if (ata_dev_present(dev)) { -+ /* We don't really care */ -+ dev->pio_mode = XFER_PIO_0; -+ dev->dma_mode = XFER_MW_DMA_0; -+ /* We do need the right mode information for DMA or PIO -+ and this comes from the current configuration flags */ -+ /* FIXME: at some point in the future this should become -+ a library helper which reads the disk modes from the -+ disk as well */ -+ if(dma_enabled & (1 << (5 + i))) { -+ dev->xfer_mode = XFER_MW_DMA_0; -+ dev->xfer_shift = ATA_SHIFT_MWDMA; -+ dev->flags &= ~ATA_DFLAG_PIO; -+ } else { -+ dev->xfer_mode = XFER_PIO_0; -+ dev->xfer_shift = ATA_SHIFT_PIO; -+ dev->flags |= ATA_DFLAG_PIO; -+ } -+ } -+ } -+} -+ -+static struct scsi_host_template genpata_sht = { -+ .module = THIS_MODULE, -+ .name = DRV_NAME, -+ .ioctl = ata_scsi_ioctl, -+ .queuecommand = ata_scsi_queuecmd, -+ .eh_strategy_handler = ata_scsi_error, -+ .can_queue = ATA_DEF_QUEUE, -+ .this_id = ATA_SHT_THIS_ID, -+ .sg_tablesize = LIBATA_MAX_PRD, -+ .max_sectors = ATA_MAX_SECTORS, -+ .cmd_per_lun = ATA_SHT_CMD_PER_LUN, -+ .emulated = ATA_SHT_EMULATED, -+ .use_clustering = ATA_SHT_USE_CLUSTERING, -+ .proc_name = DRV_NAME, -+ .dma_boundary = ATA_DMA_BOUNDARY, -+ .slave_configure = ata_scsi_slave_config, -+ .bios_param = ata_std_bios_param, -+// .ordered_flush = 1, -+}; -+ -+static struct ata_port_operations genpata_port_ops = { -+ .set_mode = genpata_set_mode, -+ -+ .port_disable = ata_port_disable, -+ .tf_load = ata_tf_load, -+ .tf_read = ata_tf_read, -+ .check_status = ata_check_status, -+ .exec_command = ata_exec_command, -+ .dev_select = ata_std_dev_select, -+ -+ .phy_reset = genpata_phy_reset, -+ -+ .bmdma_setup = ata_bmdma_setup, -+ .bmdma_start = ata_bmdma_start, -+ .bmdma_stop = ata_bmdma_stop, -+ .bmdma_status = ata_bmdma_status, -+ -+ .data_xfer = ata_pio_data_xfer, -+ -+ .qc_prep = ata_qc_prep, -+ .qc_issue = ata_qc_issue_prot, -+ .eng_timeout = ata_eng_timeout, -+ .irq_handler = ata_interrupt, -+ .irq_clear = ata_bmdma_irq_clear, -+ -+ .port_start = ata_port_start, -+ .port_stop = ata_port_stop, -+ .host_stop = ata_host_stop -+}; -+ -+static int ide_generic_all; /* Set to claim all devices */ -+ -+static int __init ide_generic_all_on(char *unused) -+{ -+ ide_generic_all = 1; -+ printk(KERN_INFO "ATA generic will claim all unknown PCI IDE class storage controllers.\n"); -+ return 1; -+} -+ -+__setup("all-generic-ide", ide_generic_all_on); -+ -+/** -+ * pata_generic_init - attach generic IDE -+ * @dev: PCI device found -+ * @id: match entry -+ * -+ * Called each time a matching IDE interface is found. We check if the -+ * interface is one we wish to claim and if so we perform any chip -+ * specific hacks then let the ATA layer do the heavy lifting. -+ */ -+ -+static int pata_generic_init_one(struct pci_dev *dev, const struct pci_device_id *id) -+{ -+ u16 command; -+ static struct ata_port_info info = { -+ .sht = &genpata_sht, -+ .host_flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST | ATA_FLAG_IRQ_MASK, -+ .pio_mask = 0x1f, -+ .mwdma_mask = 0x07, -+ .udma_mask = 0x3f, -+ .port_ops = &genpata_port_ops -+ }; -+ static struct ata_port_info *port_info[2] = { &info, &info }; -+ -+ /* Don't use the generic entry unless instructed to do so */ -+ if (id->driver_data == 1 && ide_generic_all == 0) -+ return -ENODEV; -+ -+ /* Devices that need care */ -+ if (dev->vendor == PCI_VENDOR_ID_UMC && -+ dev->device == PCI_DEVICE_ID_UMC_UM8886A && -+ (!(PCI_FUNC(dev->devfn) & 1))) -+ return -ENODEV; -+ -+ if (dev->vendor == PCI_VENDOR_ID_OPTI && -+ dev->device == PCI_DEVICE_ID_OPTI_82C558 && -+ (!(PCI_FUNC(dev->devfn) & 1))) -+ return -ENODEV; -+ -+ /* Don't re-enable devices in generic mode or we will break some -+ motherboards with disabled and unused IDE controllers */ -+ pci_read_config_word(dev, PCI_COMMAND, &command); -+ if (!(command & PCI_COMMAND_IO)) -+ return -ENODEV; -+ -+ if (dev->vendor == PCI_VENDOR_ID_AL) -+ ata_pci_clear_simplex(dev); -+ -+ return ata_pci_init_one(dev, port_info, 2); -+} -+ -+static struct pci_device_id pata_generic[] = { -+ { PCI_DEVICE(PCI_VENDOR_ID_NS,PCI_DEVICE_ID_NS_87410),}, -+ { PCI_DEVICE(PCI_VENDOR_ID_PCTECH, PCI_DEVICE_ID_PCTECH_SAMURAI_IDE), }, -+ { PCI_DEVICE(PCI_VENDOR_ID_HOLTEK, PCI_DEVICE_ID_HOLTEK_6565), }, -+ { PCI_DEVICE(PCI_VENDOR_ID_UMC, PCI_DEVICE_ID_UMC_UM8673F), }, -+ { PCI_DEVICE(PCI_VENDOR_ID_UMC, PCI_DEVICE_ID_UMC_UM8886A), }, -+ { PCI_DEVICE(PCI_VENDOR_ID_UMC, PCI_DEVICE_ID_UMC_UM8886BF), }, -+ { PCI_DEVICE(PCI_VENDOR_ID_HINT, PCI_DEVICE_ID_HINT_VXPROII_IDE), }, -+ { PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C561), }, -+ { PCI_DEVICE(PCI_VENDOR_ID_OPTI, PCI_DEVICE_ID_OPTI_82C558), }, -+ { PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO), }, -+ { PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_1), }, -+ { PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_2), }, -+ /* Must come last. If you add entries adjust this table appropriately */ -+ { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_IDE << 8, 0xFFFFFF00UL, 1}, -+ { 0, }, -+}; -+ -+static struct pci_driver pata_generic_pci_driver = { -+ .name = DRV_NAME, -+ .id_table = pata_generic, -+ .probe = pata_generic_init_one, -+ .remove = ata_pci_remove_one -+}; -+ -+static int __init pata_generic_init(void) -+{ -+ return pci_module_init(&pata_generic_pci_driver); -+} -+ -+ -+static void __exit pata_generic_exit(void) -+{ -+ pci_unregister_driver(&pata_generic_pci_driver); -+} -+ -+ -+MODULE_AUTHOR("Alan Cox"); -+MODULE_DESCRIPTION("low-level driver for generic ATA"); -+MODULE_LICENSE("GPL"); -+MODULE_DEVICE_TABLE(pci, pata_generic); -+MODULE_VERSION(DRV_VERSION); -+ -+module_init(pata_generic_init); -+module_exit(pata_generic_exit); -diff -u --exclude-from /usr/src/exclude --new-file --recursive linux.vanilla-2.6.16-rc2/drivers/scsi/ata_piix.c linux-2.6.16-rc2/drivers/scsi/ata_piix.c ---- linux.vanilla-2.6.16-rc2/drivers/scsi/ata_piix.c 2006-02-06 12:21:35.000000000 +0000 -+++ linux-2.6.16-rc2/drivers/scsi/ata_piix.c 2006-02-06 12:28:58.000000000 +0000 -@@ -91,9 +91,10 @@ - #include <linux/device.h> - #include <scsi/scsi_host.h> - #include <linux/libata.h> -+#include <linux/ata.h> - - #define DRV_NAME "ata_piix" --#define DRV_VERSION "1.05" -+#define DRV_VERSION "1.05-ac1" - - enum { - PIIX_IOCFG = 0x54, /* IDE I/O configuration register */ -@@ -122,6 +123,17 @@ - piix4_pata = 2, - ich6_sata = 3, - ich6_sata_ahci = 4, -+ ich0_pata = 5, -+ ich2_pata = 6, -+ ich3_pata = 7, -+ ich4_pata = 8, -+ cich_pata = 9, -+ piix3_pata = 10, -+ esb_pata = 11, -+ ich_pata = 12, -+ ich6_pata = 13, -+ ich7_pata = 14, -+ esb2_pata = 15, - - PIIX_AHCI_DEVICE = 6, - }; -@@ -130,20 +142,69 @@ - const struct pci_device_id *ent); - - static void piix_pata_phy_reset(struct ata_port *ap); -+static void ich_pata_phy_reset(struct ata_port *ap); - static void piix_sata_phy_reset(struct ata_port *ap); - static void piix_set_piomode (struct ata_port *ap, struct ata_device *adev); - static void piix_set_dmamode (struct ata_port *ap, struct ata_device *adev); -+static void ich_set_dmamode (struct ata_port *ap, struct ata_device *adev); - - static unsigned int in_module_init = 1; - - static const struct pci_device_id piix_pci_tbl[] = { - #ifdef ATA_ENABLE_PATA -+#if 0 -+ /* Neptune and earlier are simple PIO */ -+ /* 430HX and friends. MWDMA */ -+ { 0x8086, 0x122e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, piix3_pata }, -+ { 0x8086, 0x1230, PCI_ANY_ID, PCI_ANY_ID, 0, 0, piix3_pata }, -+ /* Intel PIIX3 */ -+ { 0x8086, 0x7010, PCI_ANY_ID, PCI_ANY_ID, 0, 0, piix3_pata }, -+#endif -+ /* Intel PIIX4 for the 430TX/440BX/MX chipset: UDMA 33 */ -+ /* Also PIIX4E (fn3 rev 2) and PIIX4M (fn3 rev 3) */ - { 0x8086, 0x7111, PCI_ANY_ID, PCI_ANY_ID, 0, 0, piix4_pata }, - { 0x8086, 0x24db, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich5_pata }, - { 0x8086, 0x25a2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich5_pata }, -+ /* Intel PIIX4 */ -+ { 0x8086, 0x7199, PCI_ANY_ID, PCI_ANY_ID, 0, 0, piix4_pata }, -+ /* Intel PIIX4 */ -+ { 0x8086, 0x7601, PCI_ANY_ID, PCI_ANY_ID, 0, 0, piix4_pata }, -+ /* Intel PIIX */ -+ { 0x8086, 0x84CA, PCI_ANY_ID, PCI_ANY_ID, 0, 0, piix4_pata }, -+ /* Intel ICH (i810, i815, i840) UDMA 66*/ -+ { 0x8086, 0x2411, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata }, -+ /* Intel ICH0 : UDMA 33*/ -+ { 0x8086, 0x2421, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich0_pata }, -+ /* Intel ICH2M */ -+ { 0x8086, 0x244A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich2_pata }, -+ /* Intel ICH2 (i810E2, i845, 850, 860) UDMA 100 */ -+ { 0x8086, 0x244B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich2_pata }, -+ /* Intel ICH3M */ -+ { 0x8086, 0x248A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich3_pata }, -+ /* Intel ICH3 (E7500/1) UDMA 100 */ -+ { 0x8086, 0x248B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich3_pata }, -+#if 0 -+ { 0x8086, 0x24C1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, dunno_pata }, -+#endif -+ /* Intel ICH4 (i845GV, i845E, i852, i855) UDMA 100 */ -+ { 0x8086, 0x24CA, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich4_pata }, -+ { 0x8086, 0x24CB, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich4_pata }, -+ /* Intel ICH5 */ -+ { 0x8086, 0x24DB, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich5_pata }, -+ /* C-ICH (i810E2) */ -+ { 0x8086, 0x245B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, cich_pata }, -+ /* ESB (855GME/875P + 6300ESB) UDMA 100 */ -+ { 0x8086, 0x25A2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, esb_pata }, -+ /* ICH6 (and 6) (i915) UDMA 100 */ -+ { 0x8086, 0x266F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_pata }, -+ /* ICH7/7-R (i945, i975) UDMA 100*/ -+ { 0x8086, 0x27DF, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich7_pata }, -+ { 0x8086, 0x269E, PCI_ANY_ID, PCI_ANY_ID, 0, 0, esb2_pata }, - #endif -- -- /* NOTE: The following PCI ids must be kept in sync with the -+ /* -+ * SATA ports -+ * -+ * NOTE: The following PCI ids must be kept in sync with the - * list in drivers/pci/quirks.c. - */ - -@@ -213,6 +274,40 @@ - .bmdma_status = ata_bmdma_status, - .qc_prep = ata_qc_prep, - .qc_issue = ata_qc_issue_prot, -+ -+ .data_xfer = ata_pio_data_xfer, -+ -+ .eng_timeout = ata_eng_timeout, -+ -+ .irq_handler = ata_interrupt, -+ .irq_clear = ata_bmdma_irq_clear, -+ -+ .port_start = ata_port_start, -+ .port_stop = ata_port_stop, -+ .host_stop = ata_host_stop, -+}; -+ -+static const struct ata_port_operations ich_pata_ops = { -+ .port_disable = ata_port_disable, -+ .set_piomode = piix_set_piomode, -+ .set_dmamode = ich_set_dmamode, -+ -+ .tf_load = ata_tf_load, -+ .tf_read = ata_tf_read, -+ .check_status = ata_check_status, -+ .exec_command = ata_exec_command, -+ .dev_select = ata_std_dev_select, -+ -+ .phy_reset = ich_pata_phy_reset, -+ -+ .bmdma_setup = ata_bmdma_setup, -+ .bmdma_start = ata_bmdma_start, -+ .bmdma_stop = ata_bmdma_stop, -+ .bmdma_status = ata_bmdma_status, -+ .qc_prep = ata_qc_prep, -+ .qc_issue = ata_qc_issue_prot, -+ -+ .data_xfer = ata_pio_data_xfer, - - .eng_timeout = ata_eng_timeout, - -@@ -242,6 +337,8 @@ - .qc_prep = ata_qc_prep, - .qc_issue = ata_qc_issue_prot, - -+ .data_xfer = ata_pio_data_xfer, -+ - .eng_timeout = ata_eng_timeout, - - .irq_handler = ata_interrupt, -@@ -259,13 +356,9 @@ - .host_flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST | - PIIX_FLAG_CHECKINTR, - .pio_mask = 0x1f, /* pio0-4 */ --#if 0 - .mwdma_mask = 0x06, /* mwdma1-2 */ --#else -- .mwdma_mask = 0x00, /* mwdma broken */ --#endif - .udma_mask = 0x3f, /* udma0-5 */ -- .port_ops = &piix_pata_ops, -+ .port_ops = &ich_pata_ops, - }, - - /* ich5_sata */ -@@ -284,11 +377,7 @@ - .sht = &piix_sht, - .host_flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, - .pio_mask = 0x1f, /* pio0-4 */ --#if 0 - .mwdma_mask = 0x06, /* mwdma1-2 */ --#else -- .mwdma_mask = 0x00, /* mwdma broken */ --#endif - .udma_mask = ATA_UDMA_MASK_40C, - .port_ops = &piix_pata_ops, - }, -@@ -316,6 +405,116 @@ - .udma_mask = 0x7f, /* udma0-6 */ - .port_ops = &piix_sata_ops, - }, -+ -+ /* ich0_pata */ -+ { -+ .sht = &piix_sht, -+ .host_flags = ATA_FLAG_SRST | ATA_FLAG_SLAVE_POSS, -+ .pio_mask = 0x1f, /* pio 0-4 */ -+ .mwdma_mask = 0x06, /* MWDMA0 is broken on chip */ -+ .udma_mask = 0x07, /* UDMA33 only */ -+ .port_ops = &ich_pata_ops, -+ }, -+ -+ /* ich2_pata */ -+ { -+ .sht = &piix_sht, -+ .host_flags = ATA_FLAG_SRST | ATA_FLAG_SLAVE_POSS, -+ .pio_mask = 0x1f, /* pio 0-4 */ -+ .mwdma_mask = 0x06, /* MWDMA0 is broken on chip */ -+ .udma_mask = 0x1f, /* UDMA100 */ -+ .port_ops = &ich_pata_ops, -+ }, -+ -+ /* ich3_pata */ -+ { -+ .sht = &piix_sht, -+ .host_flags = ATA_FLAG_SRST | ATA_FLAG_SLAVE_POSS, -+ .pio_mask = 0x1f, /* pio 0-4 */ -+ .mwdma_mask = 0x06, /* MWDMA0 is broken on chip */ -+ .udma_mask = 0x1f, /* UDMA100 */ -+ .port_ops = &ich_pata_ops, -+ }, -+ -+ /* ich4_pata */ -+ { -+ .sht = &piix_sht, -+ .host_flags = ATA_FLAG_SRST | ATA_FLAG_SLAVE_POSS, -+ .pio_mask = 0x1f, /* pio 0-4 */ -+ .mwdma_mask = 0x06, /* Check: maybe 0x07 */ -+ .udma_mask = 0x1f, /* UDMA100 */ -+ .port_ops = &ich_pata_ops, -+ }, -+ -+ /* cich_pata */ -+ { -+ .sht = &piix_sht, -+ .host_flags = ATA_FLAG_SRST | ATA_FLAG_SLAVE_POSS, -+ .pio_mask = 0x1f, /* pio 0-4 */ -+ .mwdma_mask = 0x06, /* Check: maybe 0x07 */ -+ .udma_mask = 0x1f, /* UDMA100 */ -+ .port_ops = &ich_pata_ops, -+ }, -+ -+ /* piix3_pata */ -+ { -+ .sht = &piix_sht, -+ .host_flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, -+ .pio_mask = 0x1f, /* pio0-4 */ -+ .mwdma_mask = 0x07, /* mwdma1-2 */ -+ .udma_mask = ATA_UDMA_MASK_40C, -+ .port_ops = &piix_pata_ops, -+ }, -+ -+ /* esb_pata */ -+ { -+ .sht = &piix_sht, -+ .host_flags = ATA_FLAG_SRST | ATA_FLAG_SLAVE_POSS, -+ .pio_mask = 0x1f, /* pio 0-4 */ -+ .mwdma_mask = 0x06, /* Check: maybe 0x07 */ -+ .udma_mask = 0x1f, /* UDMA100 */ -+ .port_ops = &piix_pata_ops, -+ }, -+ -+ /* ich_pata */ -+ { -+ .sht = &piix_sht, -+ .host_flags = ATA_FLAG_SRST | ATA_FLAG_SLAVE_POSS, -+ .pio_mask = 0x1f, /* pio 0-4 */ -+ .mwdma_mask = 0x06, /* Check: maybe 0x07 */ -+ .udma_mask = 0x07, /* UDMA66 */ -+ .port_ops = &ich_pata_ops, -+ }, -+ -+ /* ich6_pata */ -+ { -+ .sht = &piix_sht, -+ .host_flags = ATA_FLAG_SRST | ATA_FLAG_SLAVE_POSS, -+ .pio_mask = 0x1f, /* pio 0-4 */ -+ .mwdma_mask = 0x06, /* Check: maybe 0x07 */ -+ .udma_mask = 0x3f, /* UDMA133 */ -+ .port_ops = &ich_pata_ops, -+ }, -+ -+ /* ich7_pata */ -+ { -+ .sht = &piix_sht, -+ .host_flags = ATA_FLAG_SRST | ATA_FLAG_SLAVE_POSS, -+ .pio_mask = 0x1f, /* pio 0-4 */ -+ .mwdma_mask = 0x06, /* Check: maybe 0x07 */ -+ .udma_mask = 0x3f, /* UDMA133 */ -+ .port_ops = &ich_pata_ops, -+ }, -+ -+ /* esb2_pata */ -+ { -+ .sht = &piix_sht, -+ .host_flags = ATA_FLAG_SRST | ATA_FLAG_SLAVE_POSS, -+ .pio_mask = 0x1f, /* pio 0-4 */ -+ .mwdma_mask = 0x06, /* Check: maybe 0x07 */ -+ .udma_mask = 0x1f, /* UDMA100 -- CHECKME --*/ -+ .port_ops = &ich_pata_ops, -+ }, - }; - - static struct pci_bits piix_enable_bits[] = { -@@ -339,7 +538,7 @@ - * LOCKING: - * None (inherited from caller). - */ --static void piix_pata_cbl_detect(struct ata_port *ap) -+static void ich_pata_cbl_detect(struct ata_port *ap) - { - struct pci_dev *pdev = to_pci_dev(ap->host_set->dev); - u8 tmp, mask; -@@ -366,8 +565,9 @@ - * piix_pata_phy_reset - Probe specified port on PATA host controller - * @ap: Port to probe - * -- * Probe PATA phy. -- * -+ * Probe PATA phy. Unlike the ICH we have no IOCFG register and -+ * don't do UDMA66+ anyway. -+ - * LOCKING: - * None (inherited from caller). - */ -@@ -381,11 +581,34 @@ - printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id); - return; - } -+ ap->cbl = ATA_CBL_PATA40; -+ ata_port_probe(ap); -+ ata_bus_reset(ap); -+} - -- piix_pata_cbl_detect(ap); - -- ata_port_probe(ap); -+/** -+ * ich_pata_phy_reset - Probe specified port on PATA host controller -+ * @ap: Port to probe -+ * -+ * Probe PATA phy. -+ * -+ * LOCKING: -+ * None (inherited from caller). -+ */ -+ -+static void ich_pata_phy_reset(struct ata_port *ap) -+{ -+ struct pci_dev *pdev = to_pci_dev(ap->host_set->dev); - -+ if (!pci_test_config_bits(pdev, &piix_enable_bits[ap->hard_port_no])) { -+ ata_port_disable(ap); -+ printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id); -+ return; -+ } -+ -+ ich_pata_cbl_detect(ap); -+ ata_port_probe(ap); - ata_bus_reset(ap); - } - -@@ -481,6 +704,13 @@ - unsigned int slave_port = 0x44; - u16 master_data; - u8 slave_data; -+ u8 udma_enable; -+ int control = 0; -+ -+ /* -+ * See Intel Document 298600-004 for the timing programing rules -+ * for ICH controllers. -+ */ - - static const /* ISP RTC */ - u8 timings[][2] = { { 0, 0 }, -@@ -489,20 +719,30 @@ - { 2, 1 }, - { 2, 3 }, }; - -+ if (pio > 2) -+ control |= 1; /* TIME1 enable */ -+ if (ata_pio_need_iordy(adev)) -+ control |= 2; /* IE enable */ -+ -+ /* Intel specifies that the PPE functionality is for disk only */ -+ if (adev->class == ATA_DEV_ATA) -+ control |= 4; /* PPE enable */ -+ - pci_read_config_word(dev, master_port, &master_data); - if (is_slave) { -+ /* Enable SITRE (seperate slave timing register) */ - master_data |= 0x4000; -- /* enable PPE, IE and TIME */ -- master_data |= 0x0070; -+ /* enable PPE1, IE1 and TIME1 as needed */ -+ master_data |= (control << 4); - pci_read_config_byte(dev, slave_port, &slave_data); - slave_data &= (ap->hard_port_no ? 0x0f : 0xf0); -- slave_data |= -- (timings[pio][0] << 2) | -- (timings[pio][1] << (ap->hard_port_no ? 4 : 0)); -+ /* Load the timing nibble for this slave */ -+ slave_data |= ((timings[pio][0] << 2) | timings[pio][1]) << (ap->hard_port_no ? 4 : |