diff options
| -rw-r--r-- | packages/wpa-supplicant/files/defaults-sane | 8 | ||||
| -rw-r--r-- | packages/wpa-supplicant/files/defconfig-gnutls | 157 | ||||
| -rw-r--r-- | packages/wpa-supplicant/files/wpa_supplicant.conf-sane | 7 | ||||
| -rw-r--r-- | packages/wpa-supplicant/wpa-supplicant_0.5.1.bb | 54 |
4 files changed, 226 insertions, 0 deletions
diff --git a/packages/wpa-supplicant/files/defaults-sane b/packages/wpa-supplicant/files/defaults-sane new file mode 100644 index 0000000000..67c4cbddf8 --- /dev/null +++ b/packages/wpa-supplicant/files/defaults-sane @@ -0,0 +1,8 @@ +# Useful flags: +# -i <ifname> Interface (required, unless specified in config) +# -D <driver> Wireless Driver +# -d Debugging (-dd for more) +# -q Quiet (-qq for more) + +CONFIG="/etc/wpa_supplicant.conf" +OPTIONS="-i eth1 -D wext" diff --git a/packages/wpa-supplicant/files/defconfig-gnutls b/packages/wpa-supplicant/files/defconfig-gnutls new file mode 100644 index 0000000000..c165343399 --- /dev/null +++ b/packages/wpa-supplicant/files/defconfig-gnutls @@ -0,0 +1,157 @@ +# This file lists the configuration options that are used when building the +# hostapd binary. All lines starting with # are ignored. Configuration option +# lines must be commented out complete, if they are not to be included, i.e., +# just setting VARIABLE=n is not disabling that variable. +# +# This file is included in Makefile, so variables like CFLAGS and LIBS can also +# be modified from here. In most cass, these lines should use += in order not +# to override previous values of the variables. + +CFLAGS = $(TARGET_CFLAGS) -I../hostapd -I../utils -I../driver/modules -Wall -MMD + +# for wpa_supplicant, wpa_cli +LIBS = $(TARGET_LDFLAGS) + +# for wpa_passphrase: +LIBS_p = $(TARGET_LDFLAGS) + + +# Uncomment following two lines and fix the paths if you have installed openssl +# in non-default location +#CFLAGS += -I/usr/local/openssl/include +#LIBS += -L/usr/local/openssl/lib + +# Example configuration for various cross-compilation platforms + +#### sveasoft (e.g., for Linksys WRT54G) ###################################### +#CC=mipsel-uclibc-gcc +#CC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc +#CFLAGS += -Os +#CPPFLAGS += -I../src/include -I../../src/router/openssl/include +#LIBS += -L/opt/brcm/hndtools-mipsel-uclibc-0.9.19/lib -lssl +############################################################################### + +#### openwrt (e.g., for Linksys WRT54G) ####################################### +#CC=mipsel-uclibc-gcc +#CC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc +#CFLAGS += -Os +#CPPFLAGS=-I../src/include -I../openssl-0.9.7d/include \ +# -I../WRT54GS/release/src/include +#LIBS = -lssl +############################################################################### + + +# Driver interface for Host AP driver +CONFIG_DRIVER_HOSTAP=y + +# Driver interface for Agere driver +CONFIG_DRIVER_HERMES=y + +# Driver interface for madwifi driver +#CONFIG_DRIVER_MADWIFI=y +# Change include directories to match with the local setup +#CFLAGS += -I../madwifi/wpa + +# Driver interface for Prism54 driver +#CONFIG_DRIVER_PRISM54=y + +# Driver interface for ndiswrapper +#CONFIG_DRIVER_NDISWRAPPER=y + +# Driver interface for Atmel driver +#CONFIG_DRIVER_ATMEL=y + +# Driver interface for Broadcom driver +#CONFIG_DRIVER_BROADCOM=y +# Example path for wlioctl.h; change to match your configuration +#CFLAGS += -I/opt/WRT54GS/release/src/include + +# Driver interface for Intel ipw2100 driver +#CONFIG_DRIVER_IPW2100=y + +# Driver interface for generic Linux wireless extensions +CONFIG_DRIVER_WEXT=y + +# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver) +#CONFIG_DRIVER_BSD=y +#CFLAGS += -I/usr/local/include +#LIBS += -L/usr/local/lib + +# Driver interface for Windows NDIS +#CONFIG_DRIVER_NDIS=y +#CFLAGS += -I/usr/include/w32api/ddk +#LIBS += -L/usr/local/lib +# For native build using mingw +#CONFIG_NATIVE_WINDOWS=y +# Additional directories for cross-compilation on Linux host for mingw target +#CFLAGS += -I/opt/mingw/mingw32/include/ddk +#LIBS += -L/opt/mingw/mingw32/lib +#CC=mingw32-gcc + +# Driver interface for development testing +#CONFIG_DRIVER_TEST=y + +# Enable IEEE 802.1X Supplicant (automatically included if any EAP method is +# included) +CONFIG_IEEE8021X_EAPOL=y + +# EAP-MD5 (automatically included if EAP-TTLS is enabled) +CONFIG_EAP_MD5=y + +# EAP-MSCHAPv2 (automatically included if EAP-PEAP is enabled) +CONFIG_EAP_MSCHAPV2=y + +# EAP-TLS +CONFIG_EAP_TLS=y + +# EAL-PEAP +CONFIG_EAP_PEAP=y + +# EAP-TTLS +CONFIG_EAP_TTLS=y + +# EAP-GTC +CONFIG_EAP_GTC=y + +# EAP-OTP +CONFIG_EAP_OTP=y + +# EAP-SIM (enable CONFIG_PCSC, if EAP-SIM is used) +#CONFIG_EAP_SIM=y + +# EAP-PSK (experimental; this is _not_ needed for WPA-PSK) +#CONFIG_EAP_PSK=y + +# LEAP +CONFIG_EAP_LEAP=y + +# EAP-AKA (enable CONFIG_PCSC, if EAP-AKA is used) +#CONFIG_EAP_AKA=y + +# PKCS#12 (PFX) support (used to read private key and certificate file from +# a file that usually has extension .p12 or .pfx) +CONFIG_PKCS12=y + +# PC/SC interface for smartcards (USIM, GSM SIM) +# Enable this if EAP-SIM or EAP-AKA is included +#CONFIG_PCSC=y + +# Development testing +#CONFIG_EAPOL_TEST=y + +# Replace native Linux implementation of packet sockets with libdnet/libpcap. +# This will be automatically set for non-Linux OS. +#CONFIG_DNET_PCAP=y + +# Include control interface for external programs, e.g, wpa_cli +CONFIG_CTRL_IFACE=y + +# Include interface for using external supplicant (Xsupplicant) for EAP +# authentication +#CONFIG_XSUPPLICANT_IFACE=y + +# Include support for GNU Readline and History Libraries in wpa_cli. +# When building a wpa_cli binary for distribution, please note that these +# libraries are licensed under GPL and as such, BSD license may not apply for +# the resulting binary. +#CONFIG_READLINE=y diff --git a/packages/wpa-supplicant/files/wpa_supplicant.conf-sane b/packages/wpa-supplicant/files/wpa_supplicant.conf-sane new file mode 100644 index 0000000000..c91ffe0c84 --- /dev/null +++ b/packages/wpa-supplicant/files/wpa_supplicant.conf-sane @@ -0,0 +1,7 @@ +ctrl_interface=/var/run/wpa_supplicant +ctrl_interface_group=0 +update_config=1 + +network={ + key_mgmt=NONE +} diff --git a/packages/wpa-supplicant/wpa-supplicant_0.5.1.bb b/packages/wpa-supplicant/wpa-supplicant_0.5.1.bb new file mode 100644 index 0000000000..ead598598c --- /dev/null +++ b/packages/wpa-supplicant/wpa-supplicant_0.5.1.bb @@ -0,0 +1,54 @@ +DESCRIPTION = "A Client for Wi-Fi Protected Access (WPA)." +SECTION = "network" +LICENSE = "GPL" +MAINTAINER = "Holger Schurig" +MAINTAINER = "Eric Shattow <lucent@gmail.com>" +HOMEPAGE = "http://hostap.epitest.fi/wpa_supplicant/" +DEPENDS = "gnutls" +PR = "r1" +DEFAULT_PREFERENCE = "-1" + +SRC_URI = "http://hostap.epitest.fi/releases/wpa_supplicant-${PV}.tar.gz \ + file://defconfig-gnutls \ + file://init.sh \ + file://defaults-sane \ + file://wpa_supplicant.conf-sane" + +S = "${WORKDIR}/wpa_supplicant-${PV}" + +PACKAGES_prepend = "wpa-supplicant-passphrase wpa-supplicant-cli" +FILES_wpa-supplicant-passphrase = "/usr/sbin/wpa_passphrase" +FILES_wpa-supplicant-cli = "/usr/sbin/wpa_cli" + +RRECOMMENDS_${PN} = "wpa-supplicant-passphrase wpa-supplicant-cli" + +INITSCRIPT_NAME = "wpa" +INITSCRIPT_PARAMS = "defaults 10" +inherit update-rc.d + +do_configure () { + install -m 0755 ${WORKDIR}/defconfig-gnutls .config +} + +do_compile () { + make +} + +do_install () { + install -d ${D}${sbindir} + install -m755 wpa_supplicant ${D}${sbindir} + install -m755 wpa_passphrase ${D}${sbindir} + install -m755 wpa_cli ${D}${sbindir} + + install -d ${D}${localstatedir}/run/wpa_supplicant + + install -d ${D}${docdir}/wpa_supplicant + install -m644 README ${WORKDIR}/wpa_supplicant.conf ${D}${docdir}/wpa_supplicant + + install -d ${D}${sysconfdir}/init.d + install -m700 ${WORKDIR}/init.sh ${D}${sysconfdir}/init.d/wpa + + install -d ${D}${sysconfdir}/default + install -m600 ${WORKDIR}/defaults-sane ${D}${sysconfdir}/default/wpa + install -m600 ${WORKDIR}/wpa_supplicant.conf-sane ${D}${sysconfdir}/wpa_supplicant.conf +} |