rename packages/ to recipes/ per earlier agreement

See links below for more details:
http://thread.gmane.org/gmane.comp.handhelds.openembedded/21326
http://thread.gmane.org/gmane.comp.handhelds.openembedded/21816

Signed-off-by: Denys Dmytriyenko <denis@denix.org>
Acked-by: Mike Westerhof <mwester@dls.net>
Acked-by: Philip Balister <philip@balister.org>
Acked-by: Khem Raj <raj.khem@gmail.com>
Acked-by: Marcin Juszkiewicz <hrw@openembedded.org>
Acked-by: Koen Kooi <koen@openembedded.org>
Acked-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com>

1 files changed, 0 insertions, 203 deletions

diff --git a/packages/linux/linux-2.6.21/modular-init-smc91x.patch b/packages/linux/linux-2.6.21/modular-init-smc91x.patch
deleted file mode 100644
index 98fdd4ca38..0000000000
--- a/packages/linux/linux-2.6.21/modular-init-smc91x.patch
+++ /dev/null
@@ -1,203 +0,0 @@
-Index: linux-2.6.21gum/drivers/net/Kconfig
-===================================================================
---- linux-2.6.21gum.orig/drivers/net/Kconfig
-+++ linux-2.6.21gum/drivers/net/Kconfig
-@@ -836,6 +836,12 @@ config SMC91X
- 	  module, say M here and read <file:Documentation/modules.txt> as well
- 	  as <file:Documentation/networking/net-modules.txt>.
- 
-+config SMC91X_GUMSTIX
-+	tristate
-+	default m if SMC91X=m
-+	default y if SMC91X=y
-+	depends on SMC91X && ARCH_GUMSTIX
-+
- config SMC9194
- 	tristate "SMC 9194 support"
- 	depends on NET_VENDOR_SMC && (ISA || MAC && BROKEN)
-Index: linux-2.6.21gum/drivers/net/Makefile
-===================================================================
---- linux-2.6.21gum.orig/drivers/net/Makefile
-+++ linux-2.6.21gum/drivers/net/Makefile
-@@ -200,6 +200,7 @@ obj-$(CONFIG_PASEMI_MAC) += pasemi_mac.o
- 
- obj-$(CONFIG_MACB) += macb.o
- 
-+obj-$(CONFIG_SMC91X_GUMSTIX) += gumstix-smc91x.o
- obj-$(CONFIG_ARM) += arm/
- obj-$(CONFIG_DEV_APPLETALK) += appletalk/
- obj-$(CONFIG_TR) += tokenring/
-Index: linux-2.6.21gum/drivers/net/smc91x.c
-===================================================================
---- linux-2.6.21gum.orig/drivers/net/smc91x.c
-+++ linux-2.6.21gum/drivers/net/smc91x.c
-@@ -2373,6 +2373,10 @@ static struct platform_driver smc_driver
- 	},
- };
- 
-+#ifdef CONFIG_ARCH_GUMSTIX
-+extern void gumstix_smc91x_load(void);
-+#endif
-+
- static int __init smc_init(void)
- {
- #ifdef MODULE
-@@ -2384,6 +2388,10 @@ static int __init smc_init(void)
- #endif
- #endif
- 
-+#ifdef CONFIG_ARCH_GUMSTIX
-+	gumstix_smc91x_load();
-+#endif
-+ 
- 	return platform_driver_register(&smc_driver);
- }
- 
-Index: linux-2.6.21gum/drivers/net/gumstix-smc91x.c
-===================================================================
---- /dev/null
-+++ linux-2.6.21gum/drivers/net/gumstix-smc91x.c
-@@ -0,0 +1,143 @@
-+/*
-+ *  Gumstix SMC91C111 chip intialization driver
-+ *
-+ *  Author:     Craig Hughes
-+ *  Created:    December 9, 2004
-+ *  Copyright:  (C) 2004 Craig Hughes
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/ioport.h>
-+#include <linux/device.h>
-+#include <linux/platform_device.h>
-+#include <linux/delay.h>
-+
-+#include <asm/hardware.h>
-+#include <asm/arch/pxa-regs.h>
-+#include <asm/delay.h>
-+
-+#include <asm/arch/gumstix.h>
-+
-+#define SMC_DEBUG               0
-+#include <asm/io.h>
-+#include "smc91x.h"
-+
-+static struct resource gumstix_smc91x0_resources[] = {
-+	[0] = {
-+		.name	= "smc91x-regs",
-+		.start  = PXA_CS1_PHYS + 0x00000300,
-+		.end    = PXA_CS1_PHYS + 0x000fffff,
-+		.flags  = IORESOURCE_MEM,
-+	},
-+	[1] = {
-+		.start  = GUMSTIX_ETH0_IRQ,
-+		.end    = GUMSTIX_ETH0_IRQ,
-+		.flags  = IORESOURCE_IRQ,
-+	},
-+};
-+
-+static struct resource gumstix_smc91x1_resources[] = {
-+	[0] = {
-+		.name	= "smc91x-regs",
-+		.start	= PXA_CS2_PHYS + 0x00000300,
-+		.end	= PXA_CS2_PHYS + 0x000fffff,
-+		.flags	= IORESOURCE_MEM,
-+	},
-+	[1] = {
-+		.start	= GUMSTIX_ETH1_IRQ,
-+		.end	= GUMSTIX_ETH1_IRQ,
-+		.flags	= IORESOURCE_IRQ,
-+	},
-+};
-+
-+static struct platform_device gumstix_smc91x0_device = {
-+	.name           = "smc91x",
-+	.id             = 0,
-+	.num_resources  = ARRAY_SIZE(gumstix_smc91x0_resources),
-+	.resource       = gumstix_smc91x0_resources,
-+};
-+
-+static struct platform_device gumstix_smc91x1_device = {
-+	.name           = "smc91x",
-+	.id             = 1,
-+	.num_resources  = ARRAY_SIZE(gumstix_smc91x1_resources),
-+	.resource       = gumstix_smc91x1_resources,
-+};
-+
-+static struct platform_device *smc91x_devices[] = {
-+	&gumstix_smc91x0_device,
-+	&gumstix_smc91x1_device,
-+};
-+
-+/* First we're going to test if there's a 2nd SMC91C111, and if not, then we'll free up those resources and the GPIO lines
-+ * that it would otherwise use.  We have no choice but to probe by doing:
-+ * Set nCS2 to CS2 mode
-+ * Set the reset line to GPIO out mode, and pull it high, then drop it low (to trigger reset)
-+ * Read from the memory space to check for the sentinel sequence identifying a likely SMC91C111 device
-+ */
-+int __init gumstix_smc91x_init(void)
-+{
-+	unsigned int val, num_devices=ARRAY_SIZE(smc91x_devices);
-+	void *ioaddr;
-+
-+	/* Set up nPWE */
-+	pxa_gpio_mode(GPIO49_nPWE_MD);
-+
-+	pxa_gpio_mode(GPIO78_nCS_2_MD);
-+	// If either if statement fails, then we'll drop out and turn_off_eth1,
-+	// if both succeed, then we'll skip that and just proceed with 2 cards
-+	if(request_mem_region(gumstix_smc91x1_resources[0].start, SMC_IO_EXTENT, "smc91x probe"))
-+	{
-+		ioaddr = ioremap(gumstix_smc91x1_resources[0].start, SMC_IO_EXTENT);
-+		val = ioread16(ioaddr + BANK_SELECT);
-+		iounmap(ioaddr);
-+		release_mem_region(gumstix_smc91x1_resources[0].start, SMC_IO_EXTENT);
-+		if ((val & 0xFF00) == 0x3300) {
-+			goto proceed;
-+		}
-+	}
-+
-+turn_off_eth1:
-+	// This is apparently not an SMC91C111
-+	// So, let's decrement the number of devices to request, and reset the GPIO lines to GPIO IN mode
-+	num_devices--;
-+	smc91x_devices[1] = NULL;
-+	pxa_gpio_mode(78 | GPIO_IN);
-+	
-+proceed:
-+	pxa_gpio_mode(GPIO15_nCS_1_MD);
-+
-+	if(smc91x_devices[1]) pxa_gpio_mode(GPIO_GUMSTIX_ETH1_RST_MD);
-+	pxa_gpio_mode(GPIO_GUMSTIX_ETH0_RST_MD);
-+	if(smc91x_devices[1]) GPSR(GPIO_GUMSTIX_ETH1_RST) = GPIO_bit(GPIO_GUMSTIX_ETH1_RST);
-+	GPSR(GPIO_GUMSTIX_ETH0_RST) = GPIO_bit(GPIO_GUMSTIX_ETH0_RST);
-+	udelay(1); // Hold RESET for at least 100ns
-+	if(smc91x_devices[1]) GPCR(GPIO_GUMSTIX_ETH1_RST) = GPIO_bit(GPIO_GUMSTIX_ETH1_RST);
-+	GPCR(GPIO_GUMSTIX_ETH0_RST) = GPIO_bit(GPIO_GUMSTIX_ETH0_RST);
-+	msleep(50);
-+
-+	return platform_add_devices(smc91x_devices, num_devices);
-+}
-+
-+void __exit gumstix_smc91x_exit(void)
-+{
-+	if(smc91x_devices[1] != NULL) platform_device_unregister(&gumstix_smc91x1_device);
-+	platform_device_unregister(&gumstix_smc91x0_device);
-+}
-+
-+void gumstix_smc91x_load(void) {}
-+EXPORT_SYMBOL(gumstix_smc91x_load);
-+
-+module_init(gumstix_smc91x_init);
-+module_exit(gumstix_smc91x_exit);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Craig Hughes <craig@gumstix.com>");
-+MODULE_DESCRIPTION("Gumstix board SMC91C111 chip initialization driver");
-+MODULE_VERSION("1:0.1");