From 709c4d66e0b107ca606941b988bad717c0b45d9b Mon Sep 17 00:00:00 2001 From: Denys Dmytriyenko Date: Tue, 17 Mar 2009 14:32:59 -0400 Subject: rename packages/ to recipes/ per earlier agreement See links below for more details: http://thread.gmane.org/gmane.comp.handhelds.openembedded/21326 http://thread.gmane.org/gmane.comp.handhelds.openembedded/21816 Signed-off-by: Denys Dmytriyenko Acked-by: Mike Westerhof Acked-by: Philip Balister Acked-by: Khem Raj Acked-by: Marcin Juszkiewicz Acked-by: Koen Kooi Acked-by: Frans Meulenbroeks --- .../linux/linux-2.6.21/modular-init-smc91x.patch | 203 --------------------- 1 file changed, 203 deletions(-) delete mode 100644 packages/linux/linux-2.6.21/modular-init-smc91x.patch (limited to 'packages/linux/linux-2.6.21/modular-init-smc91x.patch') diff --git a/packages/linux/linux-2.6.21/modular-init-smc91x.patch b/packages/linux/linux-2.6.21/modular-init-smc91x.patch deleted file mode 100644 index 98fdd4ca38..0000000000 --- a/packages/linux/linux-2.6.21/modular-init-smc91x.patch +++ /dev/null @@ -1,203 +0,0 @@ -Index: linux-2.6.21gum/drivers/net/Kconfig -=================================================================== ---- linux-2.6.21gum.orig/drivers/net/Kconfig -+++ linux-2.6.21gum/drivers/net/Kconfig -@@ -836,6 +836,12 @@ config SMC91X - module, say M here and read as well - as . - -+config SMC91X_GUMSTIX -+ tristate -+ default m if SMC91X=m -+ default y if SMC91X=y -+ depends on SMC91X && ARCH_GUMSTIX -+ - config SMC9194 - tristate "SMC 9194 support" - depends on NET_VENDOR_SMC && (ISA || MAC && BROKEN) -Index: linux-2.6.21gum/drivers/net/Makefile -=================================================================== ---- linux-2.6.21gum.orig/drivers/net/Makefile -+++ linux-2.6.21gum/drivers/net/Makefile -@@ -200,6 +200,7 @@ obj-$(CONFIG_PASEMI_MAC) += pasemi_mac.o - - obj-$(CONFIG_MACB) += macb.o - -+obj-$(CONFIG_SMC91X_GUMSTIX) += gumstix-smc91x.o - obj-$(CONFIG_ARM) += arm/ - obj-$(CONFIG_DEV_APPLETALK) += appletalk/ - obj-$(CONFIG_TR) += tokenring/ -Index: linux-2.6.21gum/drivers/net/smc91x.c -=================================================================== ---- linux-2.6.21gum.orig/drivers/net/smc91x.c -+++ linux-2.6.21gum/drivers/net/smc91x.c -@@ -2373,6 +2373,10 @@ static struct platform_driver smc_driver - }, - }; - -+#ifdef CONFIG_ARCH_GUMSTIX -+extern void gumstix_smc91x_load(void); -+#endif -+ - static int __init smc_init(void) - { - #ifdef MODULE -@@ -2384,6 +2388,10 @@ static int __init smc_init(void) - #endif - #endif - -+#ifdef CONFIG_ARCH_GUMSTIX -+ gumstix_smc91x_load(); -+#endif -+ - return platform_driver_register(&smc_driver); - } - -Index: linux-2.6.21gum/drivers/net/gumstix-smc91x.c -=================================================================== ---- /dev/null -+++ linux-2.6.21gum/drivers/net/gumstix-smc91x.c -@@ -0,0 +1,143 @@ -+/* -+ * Gumstix SMC91C111 chip intialization driver -+ * -+ * Author: Craig Hughes -+ * Created: December 9, 2004 -+ * Copyright: (C) 2004 Craig Hughes -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+ -+#include -+ -+#define SMC_DEBUG 0 -+#include -+#include "smc91x.h" -+ -+static struct resource gumstix_smc91x0_resources[] = { -+ [0] = { -+ .name = "smc91x-regs", -+ .start = PXA_CS1_PHYS + 0x00000300, -+ .end = PXA_CS1_PHYS + 0x000fffff, -+ .flags = IORESOURCE_MEM, -+ }, -+ [1] = { -+ .start = GUMSTIX_ETH0_IRQ, -+ .end = GUMSTIX_ETH0_IRQ, -+ .flags = IORESOURCE_IRQ, -+ }, -+}; -+ -+static struct resource gumstix_smc91x1_resources[] = { -+ [0] = { -+ .name = "smc91x-regs", -+ .start = PXA_CS2_PHYS + 0x00000300, -+ .end = PXA_CS2_PHYS + 0x000fffff, -+ .flags = IORESOURCE_MEM, -+ }, -+ [1] = { -+ .start = GUMSTIX_ETH1_IRQ, -+ .end = GUMSTIX_ETH1_IRQ, -+ .flags = IORESOURCE_IRQ, -+ }, -+}; -+ -+static struct platform_device gumstix_smc91x0_device = { -+ .name = "smc91x", -+ .id = 0, -+ .num_resources = ARRAY_SIZE(gumstix_smc91x0_resources), -+ .resource = gumstix_smc91x0_resources, -+}; -+ -+static struct platform_device gumstix_smc91x1_device = { -+ .name = "smc91x", -+ .id = 1, -+ .num_resources = ARRAY_SIZE(gumstix_smc91x1_resources), -+ .resource = gumstix_smc91x1_resources, -+}; -+ -+static struct platform_device *smc91x_devices[] = { -+ &gumstix_smc91x0_device, -+ &gumstix_smc91x1_device, -+}; -+ -+/* First we're going to test if there's a 2nd SMC91C111, and if not, then we'll free up those resources and the GPIO lines -+ * that it would otherwise use. We have no choice but to probe by doing: -+ * Set nCS2 to CS2 mode -+ * Set the reset line to GPIO out mode, and pull it high, then drop it low (to trigger reset) -+ * Read from the memory space to check for the sentinel sequence identifying a likely SMC91C111 device -+ */ -+int __init gumstix_smc91x_init(void) -+{ -+ unsigned int val, num_devices=ARRAY_SIZE(smc91x_devices); -+ void *ioaddr; -+ -+ /* Set up nPWE */ -+ pxa_gpio_mode(GPIO49_nPWE_MD); -+ -+ pxa_gpio_mode(GPIO78_nCS_2_MD); -+ // If either if statement fails, then we'll drop out and turn_off_eth1, -+ // if both succeed, then we'll skip that and just proceed with 2 cards -+ if(request_mem_region(gumstix_smc91x1_resources[0].start, SMC_IO_EXTENT, "smc91x probe")) -+ { -+ ioaddr = ioremap(gumstix_smc91x1_resources[0].start, SMC_IO_EXTENT); -+ val = ioread16(ioaddr + BANK_SELECT); -+ iounmap(ioaddr); -+ release_mem_region(gumstix_smc91x1_resources[0].start, SMC_IO_EXTENT); -+ if ((val & 0xFF00) == 0x3300) { -+ goto proceed; -+ } -+ } -+ -+turn_off_eth1: -+ // This is apparently not an SMC91C111 -+ // So, let's decrement the number of devices to request, and reset the GPIO lines to GPIO IN mode -+ num_devices--; -+ smc91x_devices[1] = NULL; -+ pxa_gpio_mode(78 | GPIO_IN); -+ -+proceed: -+ pxa_gpio_mode(GPIO15_nCS_1_MD); -+ -+ if(smc91x_devices[1]) pxa_gpio_mode(GPIO_GUMSTIX_ETH1_RST_MD); -+ pxa_gpio_mode(GPIO_GUMSTIX_ETH0_RST_MD); -+ if(smc91x_devices[1]) GPSR(GPIO_GUMSTIX_ETH1_RST) = GPIO_bit(GPIO_GUMSTIX_ETH1_RST); -+ GPSR(GPIO_GUMSTIX_ETH0_RST) = GPIO_bit(GPIO_GUMSTIX_ETH0_RST); -+ udelay(1); // Hold RESET for at least 100ns -+ if(smc91x_devices[1]) GPCR(GPIO_GUMSTIX_ETH1_RST) = GPIO_bit(GPIO_GUMSTIX_ETH1_RST); -+ GPCR(GPIO_GUMSTIX_ETH0_RST) = GPIO_bit(GPIO_GUMSTIX_ETH0_RST); -+ msleep(50); -+ -+ return platform_add_devices(smc91x_devices, num_devices); -+} -+ -+void __exit gumstix_smc91x_exit(void) -+{ -+ if(smc91x_devices[1] != NULL) platform_device_unregister(&gumstix_smc91x1_device); -+ platform_device_unregister(&gumstix_smc91x0_device); -+} -+ -+void gumstix_smc91x_load(void) {} -+EXPORT_SYMBOL(gumstix_smc91x_load); -+ -+module_init(gumstix_smc91x_init); -+module_exit(gumstix_smc91x_exit); -+ -+MODULE_LICENSE("GPL"); -+MODULE_AUTHOR("Craig Hughes "); -+MODULE_DESCRIPTION("Gumstix board SMC91C111 chip initialization driver"); -+MODULE_VERSION("1:0.1"); -- cgit v1.2.3