linux: added 2.6.21 for Simpad (progear need refresh of config) - close #2247

7 files changed, 3344 insertions, 103 deletions

diff --git a/packages/linux/linux/simpad/defconfig b/packages/linux/linux/simpad/defconfig
index 2115d30a2c..36d5e942b4 100644
--- a/packages/linux/linux/simpad/defconfig
+++ b/packages/linux/linux/simpad/defconfig
@@ -1,11 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20
-# Mon Apr  2 11:51:54 2007
+# Linux kernel version: 2.6.21
+# Sun May  6 14:01:42 2007
 #
 CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
 # CONFIG_GENERIC_TIME is not set
 CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_HARDIRQS_SW_RESEND=y
@@ -15,6 +18,7 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
 CONFIG_ARCH_MTD_XIP=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -35,6 +39,7 @@ CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 # CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
@@ -43,7 +48,7 @@ CONFIG_SYSVIPC=y
 # CONFIG_IKCONFIG is not set
 CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
@@ -71,9 +76,8 @@ CONFIG_BASE_SMALL=0
 # Loadable module support
 #
 CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
 
@@ -122,6 +126,7 @@ CONFIG_DEFAULT_IOSCHED="cfq"
 # CONFIG_ARCH_IXP2000 is not set
 # CONFIG_ARCH_IXP23XX is not set
 # CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_NS9XXX is not set
 # CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
 # CONFIG_ARCH_RPC is not set
@@ -167,6 +172,7 @@ CONFIG_CPU_CP15_MMU=y
 #
 # CONFIG_CPU_ICACHE_DISABLE is not set
 # CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_OUTER_CACHE is not set
 
 #
 # Bus support
@@ -177,7 +183,7 @@ CONFIG_ISA=y
 # PCCARD (PCMCIA/CardBus) support
 #
 CONFIG_PCCARD=y
-CONFIG_PCMCIA_DEBUG=y
+# CONFIG_PCMCIA_DEBUG is not set
 CONFIG_PCMCIA=y
 CONFIG_PCMCIA_LOAD_CIS=y
 CONFIG_PCMCIA_IOCTL=y
@@ -208,6 +214,7 @@ CONFIG_NEED_MULTIPLE_NODES=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4096
 # CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
 CONFIG_LEDS=y
 CONFIG_LEDS_TIMER=y
 # CONFIG_LEDS_CPU is not set
@@ -220,6 +227,7 @@ CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mtdparts=sa1100:512k(boot),1m(kernel),-(root) console=ttySA0 root=1f02 noinitrd mem=64M jffs2_orphaned_inodes=delete rootfstype=jffs2"
 # CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
 
 #
 # CPU Frequency scaling
@@ -249,11 +257,10 @@ CONFIG_BINFMT_MISC=m
 # Power management options
 #
 CONFIG_PM=y
-CONFIG_PM_LEGACY=y
-CONFIG_PM_DEBUG=y
-CONFIG_DISABLE_CONSOLE_SUSPEND=y
+# CONFIG_PM_LEGACY is not set
+# CONFIG_PM_DEBUG is not set
 # CONFIG_PM_SYSFS_DEPRECATED is not set
-CONFIG_APM=y
+# CONFIG_APM_EMULATION is not set
 
 #
 # Networking
@@ -270,6 +277,7 @@ CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -403,12 +411,7 @@ CONFIG_BT_BNEP_PROTO_FILTER=y
 # CONFIG_BT_HCIBLUECARD is not set
 # CONFIG_BT_HCIBTUART is not set
 # CONFIG_BT_HCIVHCI is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-# CONFIG_IEEE80211_CRYPT_CCMP is not set
-# CONFIG_IEEE80211_CRYPT_TKIP is not set
-# CONFIG_IEEE80211_SOFTMAC is not set
+# CONFIG_IEEE80211 is not set
 CONFIG_WIRELESS_EXT=y
 
 #
@@ -422,6 +425,7 @@ CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
 # CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
 
 #
@@ -528,6 +532,7 @@ CONFIG_MTD_SA1100=y
 # Plug and Play support
 #
 # CONFIG_PNP is not set
+# CONFIG_PNPACPI is not set
 
 #
 # Block devices
@@ -540,38 +545,13 @@ CONFIG_BLK_DEV_RAM=m
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 
 #
 # ATA/ATAPI/MFM/RLL support
 #
-CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-CONFIG_BLK_DEV_IDECS=y
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_IDE_GENERIC is not set
-# CONFIG_IDE_ARM is not set
-# CONFIG_IDE_CHIPSETS is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
+# CONFIG_IDE is not set
 
 #
 # SCSI device support
@@ -749,7 +729,14 @@ CONFIG_INPUT_EVBUG=y
 #
 # Input Device Drivers
 #
-# CONFIG_INPUT_KEYBOARD is not set
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_GPIO=y
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
@@ -798,7 +785,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # Watchdog Cards
 #
 # CONFIG_WATCHDOG is not set
-CONFIG_HW_RANDOM=y
+CONFIG_HW_RANDOM=m
 # CONFIG_NVRAM is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
@@ -836,12 +823,6 @@ CONFIG_HW_RANDOM=y
 # Hardware Monitoring support
 #
 CONFIG_HWMON=y
-
-#
-# Hardware Monitoring - Battery
-#
-CONFIG_BATTERY_MONITOR=y
-CONFIG_MCP_UCB1200_SIMPAD_BATTERY=y
 # CONFIG_HWMON_VID is not set
 # CONFIG_SENSORS_ABITUGURU is not set
 # CONFIG_SENSORS_F71805F is not set
@@ -852,7 +833,11 @@ CONFIG_MCP_UCB1200_SIMPAD_BATTERY=y
 #
 # Misc devices
 #
-# CONFIG_TIFM_CORE is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
 
 #
 # Multimedia Capabilities Port drivers
@@ -889,15 +874,26 @@ CONFIG_MCP_UCB1200_SWITCHES=y
 #
 # Graphics support
 #
-CONFIG_FIRMWARE_EDID=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_LCD_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_SIMPAD=y
+CONFIG_LCD_SIMPAD=y
 CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
 # CONFIG_FB_MODE_HELPERS is not set
 # CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frambuffer hardware drivers
+#
 # CONFIG_FB_SA1100 is not set
 # CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_MQ200=y
@@ -922,13 +918,6 @@ CONFIG_LOGO=y
 CONFIG_LOGO_LINUX_MONO=y
 CONFIG_LOGO_LINUX_VGA16=y
 CONFIG_LOGO_LINUX_CLUT224=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_DEVICE=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_LCD_DEVICE=y
-CONFIG_FB_MQ200_LCD=y
-CONFIG_FB_MQ200_BACKLIGHT=y
 
 #
 # Sound
@@ -949,6 +938,7 @@ CONFIG_SOUND=y
 # HID Devices
 #
 CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
 
 #
 # USB support
@@ -997,7 +987,7 @@ CONFIG_REISERFS_FS=m
 CONFIG_REISERFS_PROC_INFO=y
 # CONFIG_REISERFS_FS_XATTR is not set
 # CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
+# CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
@@ -1010,7 +1000,6 @@ CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
-CONFIG_GENERIC_ACL=y
 
 #
 # CD-ROM/DVD Filesystems
@@ -1034,8 +1023,7 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_PROC_FS=y
 CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
@@ -1160,16 +1148,17 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_SLAB is not set
 CONFIG_DEBUG_PREEMPT=y
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_RWSEMS is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -1180,6 +1169,7 @@ CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_FRAME_POINTER=y
 CONFIG_FORCED_INLINING=y
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
 CONFIG_DEBUG_LL=y
@@ -1194,43 +1184,7 @@ CONFIG_DEBUG_LL=y
 #
 # Cryptographic options
 #
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_MANAGER=m
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-CONFIG_CRYPTO_ARC4=m
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
+# CONFIG_CRYPTO is not set
 
 #
 # Library routines
@@ -1243,4 +1197,5 @@ CONFIG_CRC32=y
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
 CONFIG_PLIST=y
-CONFIG_IOMAP_COPY=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
diff --git a/packages/linux/linux/simpad/linux-2.6.21-SIMpad-cs3-simpad.patch b/packages/linux/linux/simpad/linux-2.6.21-SIMpad-cs3-simpad.patch
new file mode 100644
index 0000000000..6d6c373271
--- /dev/null
+++ b/packages/linux/linux/simpad/linux-2.6.21-SIMpad-cs3-simpad.patch
@@ -0,0 +1,315 @@
+diff -uNr linux-2.6.21.vanilla/arch/arm/mach-sa1100/Makefile linux-2.6.21/arch/arm/mach-sa1100/Makefile
+--- linux-2.6.21.vanilla/arch/arm/mach-sa1100/Makefile	2007-05-01 16:40:44.000000000 +0200
++++ linux-2.6.21/arch/arm/mach-sa1100/Makefile	2007-05-01 16:52:10.000000000 +0200
+@@ -40,6 +40,7 @@
+ obj-$(CONFIG_SA1100_SHANNON)		+= shannon.o
+ 
+ obj-$(CONFIG_SA1100_SIMPAD)		+= simpad.o
++obj-$(CONFIG_SA1100_SIMPAD)             += cs3-simpad.o
+ led-$(CONFIG_SA1100_SIMPAD)		+= leds-simpad.o
+ 
+ # LEDs support
+diff -uNr linux-2.6.21.vanilla/arch/arm/mach-sa1100/cs3-simpad.c linux-2.6.21/arch/arm/mach-sa1100/cs3-simpad.c
+--- linux-2.6.21.vanilla/arch/arm/mach-sa1100/cs3-simpad.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.21/arch/arm/mach-sa1100/cs3-simpad.c	2007-05-01 16:52:10.000000000 +0200
+@@ -0,0 +1,300 @@
++/*
++ *  cs3-simpad.c
++ *
++ *  This driver shows the GPIO states of the cs3 latch. You can also
++ *  switch some GPIOS.
++ *
++ *  (c) 2007 Bernhard Guillon <Bernhard.Guillon@OpenSIMpad.org>
++ *
++ *  You may use this code as per GPL version 2
++ *
++ *  Some parts are based on battery.c
++ *
++ */
++
++#include <linux/module.h>
++#include <linux/types.h>
++#include <linux/init.h>
++#include <linux/device.h>
++
++#include <asm/arch/simpad.h>
++
++extern long get_cs3_shadow(void);
++extern void set_cs3_bit(int value);
++extern void clear_cs3_bit(int value);
++
++struct cs3 {
++	struct class_device class_dev;
++	const char *name;
++	char *id;
++	int type;
++};
++
++struct cs3 cs3 ={
++        .name = "latch_cs3",
++};
++
++static ssize_t get_VCC_5V_EN (struct class_device *class_dev, char *buf) {
++    if (get_cs3_shadow() & VCC_5V_EN ) 
++        return sprintf(buf, "1\n");
++    else 
++        return sprintf(buf, "0\n");
++} 
++
++static ssize_t get_VCC_3V_EN (struct class_device *class_dev, char *buf) {
++    if (get_cs3_shadow() & VCC_3V_EN) 
++        return sprintf(buf, "1\n");
++    else 
++        return sprintf(buf, "0\n");
++} 
++
++static ssize_t get_EN1 (struct class_device *class_dev, char *buf) {
++    if (get_cs3_shadow() & EN1) 
++        return sprintf(buf, "1\n");
++    else 
++        return sprintf(buf, "0\n");
++} 
++
++static ssize_t get_EN0 (struct class_device *class_dev, char *buf) {
++    if (get_cs3_shadow() & EN0) 
++        return sprintf(buf, "1\n");
++    else 
++        return sprintf(buf, "0\n");
++} 
++
++static ssize_t get_DISPLAY_ON (struct class_device *class_dev, char *buf) {
++    if (get_cs3_shadow() & DISPLAY_ON) 
++        return sprintf(buf, "1\n");
++    else 
++        return sprintf(buf, "0\n");
++} 
++
++static ssize_t get_PCMCIA_BUFF_DIS (struct class_device *class_dev, char *buf) {
++    if (get_cs3_shadow() & PCMCIA_BUFF_DIS) 
++        return sprintf(buf, "1\n");
++    else 
++        return sprintf(buf, "0\n");
++} 
++
++static ssize_t get_MQ_RESET (struct class_device *class_dev, char *buf) {
++    if (get_cs3_shadow() & MQ_RESET) 
++        return sprintf(buf, "1\n");
++    else 
++        return sprintf(buf, "0\n");
++} 
++
++static ssize_t get_PCMCIA_RESET (struct class_device *class_dev, char *buf) {
++    if (get_cs3_shadow() & PCMCIA_RESET) 
++        return sprintf(buf, "1\n");
++    else 
++        return sprintf(buf, "0\n");
++}
++
++static ssize_t get_DECT_POWER_ON (struct class_device *class_dev, char *buf) {
++    if (get_cs3_shadow() & DECT_POWER_ON) 
++        return sprintf(buf, "1\n");
++    else 
++        return sprintf(buf, "0\n");
++} 
++
++static ssize_t get_IRDA_SD (struct class_device *class_dev, char *buf) {
++    if (get_cs3_shadow() & IRDA_SD) 
++        return sprintf(buf, "1\n");
++    else 
++        return sprintf(buf, "0\n");
++} 
++
++static ssize_t get_RS232_ON (struct class_device *class_dev, char *buf) {
++    if (get_cs3_shadow() & RS232_ON) 
++        return sprintf(buf, "1\n");
++    else 
++        return sprintf(buf, "0\n");
++} 
++
++static ssize_t get_SD_MEDIAQ (struct class_device *class_dev, char *buf) {
++    if (get_cs3_shadow() & SD_MEDIAQ) 
++        return sprintf(buf, "1\n");
++    else 
++        return sprintf(buf, "0\n");
++}
++
++static ssize_t get_LED2_ON (struct class_device *class_dev, char *buf) {
++    if (get_cs3_shadow() & LED2_ON) 
++        return sprintf(buf, "1\n");
++    else 
++        return sprintf(buf, "0\n");
++} 
++
++static ssize_t get_IRDA_MODE (struct class_device *class_dev, char *buf) {
++    if (get_cs3_shadow() & IRDA_MODE) 
++        return sprintf(buf, "1\n");
++    else 
++        return sprintf(buf, "0\n");
++}
++
++static ssize_t get_ENABLE_5V (struct class_device *class_dev, char *buf) {
++    if (get_cs3_shadow() & ENABLE_5V) 
++        return sprintf(buf, "1\n");
++    else 
++        return sprintf(buf, "0\n");
++} 
++
++static ssize_t get_RESET_SIMCARD (struct class_device *class_dev, char *buf) {
++    if (get_cs3_shadow() & RESET_SIMCARD) 
++        return sprintf(buf, "1\n");
++    else 
++        return sprintf(buf, "0\n");
++}
++
++
++static ssize_t write_DISPLAY_ON (struct class_device *cdev, const char * buf, size_t count){
++    char val;
++        if (sscanf(buf, "%c",&val) !=1)
++            return -EINVAL;
++        if (val=='1')
++            set_cs3_bit(DISPLAY_ON);
++        else if (val=='0')
++            clear_cs3_bit(DISPLAY_ON);
++        return strlen(buf);
++}
++
++static ssize_t write_DECT_POWER_ON (struct class_device *cdev, const char * buf, size_t count){
++    char val;
++        if (sscanf(buf, "%c",&val) !=1)
++            return -EINVAL;
++        if (val=='1')
++            set_cs3_bit(DECT_POWER_ON);
++        else if (val=='0')
++            clear_cs3_bit(DECT_POWER_ON);
++        return strlen(buf);
++}
++
++static ssize_t write_IRDA_SD (struct class_device *cdev, const char * buf, size_t count){
++    char val;
++        if (sscanf(buf, "%c",&val) !=1)
++            return -EINVAL;
++        if (val=='1')
++            set_cs3_bit(IRDA_SD);
++        else if (val=='0')
++            clear_cs3_bit(IRDA_SD);
++        return strlen(buf);
++}
++
++static ssize_t write_SD_MEDIAQ (struct class_device *cdev, const char * buf, size_t count){
++    char val;
++        if (sscanf(buf, "%c",&val) !=1)
++            return -EINVAL;
++        if (val=='1')
++            set_cs3_bit(SD_MEDIAQ);
++        else if (val=='0')
++            clear_cs3_bit(SD_MEDIAQ);
++        return strlen(buf);
++}
++
++static ssize_t write_LED2_ON (struct class_device *cdev, const char * buf, size_t count){
++    char val;
++        if (sscanf(buf, "%c",&val) !=1)
++            return -EINVAL;
++        if (val=='1')
++            set_cs3_bit(LED2_ON);
++        else if (val=='0')
++            clear_cs3_bit(LED2_ON);
++        return strlen(buf);
++}
++
++static ssize_t write_IRDA_MODE (struct class_device *cdev, const char * buf, size_t count){
++    char val;
++        if (sscanf(buf, "%c",&val) !=1)
++            return -EINVAL;
++        if (val=='1')
++            set_cs3_bit(IRDA_MODE);
++        else if (val=='0')
++            clear_cs3_bit(IRDA_MODE);
++        return strlen(buf);
++}
++
++static ssize_t write_RESET_SIMCARD (struct class_device *cdev, const char * buf, size_t count){
++    char val;
++        if (sscanf(buf, "%c",&val) !=1)
++            return -EINVAL;
++        if (val=='1')
++            set_cs3_bit(RESET_SIMCARD);
++        else if (val=='0')
++            clear_cs3_bit(RESET_SIMCARD);
++        return strlen(buf);
++}
++
++static CLASS_DEVICE_ATTR(vcc_5v_en, 0444, get_VCC_5V_EN, NULL);
++static CLASS_DEVICE_ATTR(vcc_3v_en, 0444, get_VCC_3V_EN, NULL);
++static CLASS_DEVICE_ATTR(en1, 0444, get_EN1, NULL);
++static CLASS_DEVICE_ATTR(en0, 0444, get_EN0, NULL);
++static CLASS_DEVICE_ATTR(display_on, 0664, get_DISPLAY_ON, write_DISPLAY_ON);
++static CLASS_DEVICE_ATTR(pcmcia_buff_dis, 0444, get_PCMCIA_BUFF_DIS, NULL);
++static CLASS_DEVICE_ATTR(mq_reset, 0444, get_MQ_RESET, NULL);
++static CLASS_DEVICE_ATTR(pcmcia_reset, 0444, get_PCMCIA_RESET, NULL);
++static CLASS_DEVICE_ATTR(dect_power_on, 0664, get_DECT_POWER_ON, write_DECT_POWER_ON);
++static CLASS_DEVICE_ATTR(irda_sd, 0664, get_IRDA_SD, write_IRDA_SD);
++static CLASS_DEVICE_ATTR(rs232_on, 0444, get_RS232_ON, NULL);
++static CLASS_DEVICE_ATTR(sd_mediaq, 0664, get_SD_MEDIAQ, write_SD_MEDIAQ);
++static CLASS_DEVICE_ATTR(led2_on, 0664, get_LED2_ON, write_LED2_ON);
++static CLASS_DEVICE_ATTR(irda_mode, 0664, get_IRDA_MODE, write_IRDA_MODE);
++static CLASS_DEVICE_ATTR(enable_5v, 0444, get_ENABLE_5V, NULL);
++static CLASS_DEVICE_ATTR(reset_simcard, 0664, get_RESET_SIMCARD, write_RESET_SIMCARD);
++
++static struct class simpad_gpios_class = {
++        .name = "simpad"
++};
++
++#define create_entry_conditional(name) \
++	rc = class_device_create_file(&cs3->class_dev, &class_device_attr_##name); \
++	if (rc) goto out; \
++
++static int register_cs3_latch(struct cs3 *cs3){
++    int rc = 0;
++	cs3->class_dev.class = &simpad_gpios_class;
++	strcpy(cs3->class_dev.class_id, cs3->name);
++	rc = class_device_register(&cs3->class_dev);
++	if(rc)
++		goto out;
++
++	create_entry_conditional(vcc_5v_en);
++    create_entry_conditional(vcc_3v_en);
++    create_entry_conditional(en1);
++    create_entry_conditional(en0);
++    create_entry_conditional(display_on);
++    create_entry_conditional(pcmcia_buff_dis);
++    create_entry_conditional(mq_reset);
++    create_entry_conditional(pcmcia_reset);
++    create_entry_conditional(dect_power_on);
++    create_entry_conditional(irda_sd);
++    create_entry_conditional(rs232_on);
++    create_entry_conditional(sd_mediaq);
++    create_entry_conditional(led2_on);
++    create_entry_conditional(irda_mode);
++    create_entry_conditional(enable_5v);
++    create_entry_conditional(reset_simcard);
++    
++out:
++    return rc;
++}
++
++static int __init simpad_gpios_class_init(void)
++{
++    if (class_register(&simpad_gpios_class) != 0)
++    printk(KERN_ERR "cs3 latch class failed "
++                    "to register properly\n");
++    register_cs3_latch(&cs3);
++	return 0;
++}
++
++static void __exit simpad_gpios_class_exit(void)
++{
++	class_unregister(&simpad_gpios_class);
++}
++
++module_init(simpad_gpios_class_init);
++module_exit(simpad_gpios_class_exit);
++                                                                                
++MODULE_DESCRIPTION("CS3_latch driver");
++MODULE_AUTHOR("Bernhard Guillon");
++MODULE_LICENSE("GPL");
diff --git a/packages/linux/linux/simpad/linux-2.6.21-SIMpad-mq200.patch b/packages/linux/linux/simpad/linux-2.6.21-SIMpad-mq200.patch
new file mode 100644
index 0000000000..5726779ad6
--- /dev/null
+++ b/packages/linux/linux/simpad/linux-2.6.21-SIMpad-mq200.patch
@@ -0,0 +1,2511 @@
+diff -uNr linux-2.6.21.vanilla/drivers/video/Kconfig linux-2.6.21/drivers/video/Kconfig
+--- linux-2.6.21.vanilla/drivers/video/Kconfig	2007-05-01 16:40:48.000000000 +0200
++++ linux-2.6.21/drivers/video/Kconfig	2007-05-01 17:02:17.000000000 +0200
+@@ -139,7 +139,7 @@
+ 	 This is particularly important to one driver, matroxfb.  If
+ 	 unsure, say N.
+ 
+-comment "Frame buffer hardware drivers"
++comment "Frambuffer hardware drivers"
+ 	depends on FB
+ 
+ config FB_CIRRUS
+@@ -1120,6 +1120,15 @@
+ 	---help---
+ 	  Driver for graphics boards with S3 Trio / S3 Virge chip.
+ 
++config FB_MQ200
++        bool "MQ200 Driver"
++        depends on (FB = y) && ARM && ARCH_SA1100
++        select FB_CFB_FILLRECT
++        select FB_CFB_COPYAREA
++        select FB_CFB_IMAGEBLIT
++        help
++         This is a MQ200 driver tested only on Siemens SIMpads. 
++
+ config FB_SAVAGE
+ 	tristate "S3 Savage support"
+ 	depends on FB && PCI && EXPERIMENTAL
+diff -uNr linux-2.6.21.vanilla/drivers/video/Makefile linux-2.6.21/drivers/video/Makefile
+--- linux-2.6.21.vanilla/drivers/video/Makefile	2007-05-01 16:40:48.000000000 +0200
++++ linux-2.6.21/drivers/video/Makefile	2007-05-01 17:02:17.000000000 +0200
+@@ -29,6 +29,7 @@
+ obj-$(CONFIG_FB_PM2)              += pm2fb.o
+ obj-$(CONFIG_FB_PM3)		  += pm3fb.o
+ 
++obj-$(CONFIG_FB_MQ200)            += mq200/
+ obj-$(CONFIG_FB_MATROX)		  += matrox/
+ obj-$(CONFIG_FB_RIVA)		  += riva/ vgastate.o
+ obj-$(CONFIG_FB_NVIDIA)		  += nvidia/
+diff -uNr linux-2.6.21.vanilla/drivers/video/backlight/Kconfig linux-2.6.21/drivers/video/backlight/Kconfig
+--- linux-2.6.21.vanilla/drivers/video/backlight/Kconfig	2007-05-01 16:40:48.000000000 +0200
++++ linux-2.6.21/drivers/video/backlight/Kconfig	2007-05-01 17:02:17.000000000 +0200
+@@ -63,3 +63,20 @@
+ 	help
+ 	  If you have a Frontpath ProGear say Y to enable the
+ 	  backlight driver.
++
++config BACKLIGHT_SIMPAD
++        tristate "SIMpad MQ200 Backlight driver"
++        depends on SA1100_SIMPAD && BACKLIGHT_CLASS_DEVICE
++	default y
++        help
++          If you have a Siemens SIMpad say Y to enable the
++          backlight driver.
++
++config LCD_SIMPAD
++        tristate "SIMpad MQ200 LCD driver"
++        depends on SA1100_SIMPAD && LCD_CLASS_DEVICE
++	default y
++        help
++          If you have a Siemens SIMpad say Y to enable the
++          LCD driver.
++
+diff -uNr linux-2.6.21.vanilla/drivers/video/backlight/Makefile linux-2.6.21/drivers/video/backlight/Makefile
+--- linux-2.6.21.vanilla/drivers/video/backlight/Makefile	2007-05-01 16:40:48.000000000 +0200
++++ linux-2.6.21/drivers/video/backlight/Makefile	2007-05-01 17:02:17.000000000 +0200
+@@ -6,3 +6,5 @@
+ obj-$(CONFIG_BACKLIGHT_HP680)	+= hp680_bl.o
+ obj-$(CONFIG_BACKLIGHT_LOCOMO)	+= locomolcd.o
+ obj-$(CONFIG_BACKLIGHT_PROGEAR) += progear_bl.o
++obj-$(CONFIG_BACKLIGHT_SIMPAD)	+= simpad_bl.o
++obj-$(CONFIG_LCD_SIMPAD)	+= simpad_lcd.o
+diff -uNr linux-2.6.21.vanilla/drivers/video/backlight/simpad_bl.c linux-2.6.21/drivers/video/backlight/simpad_bl.c
+--- linux-2.6.21.vanilla/drivers/video/backlight/simpad_bl.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.21/drivers/video/backlight/simpad_bl.c	2007-05-01 17:02:17.000000000 +0200
+@@ -0,0 +1,208 @@
++/*
++ * GPLv2 <zecke@handhelds.org
++ *
++ * Implementation of the backlight_driver for
++ * the mq200 framebuffer
++ *
++ * 2007/03/17 mrdata:
++ *            - small changes simpad_bl_get_brightness()
++ *                            simpad_bl_set_brightness()
++ *            - new function simpad_bl_update_status()
++ *            - changed struct backlight_properties simpad_bl_props()
++ *              to new one
++ *            - changed __init simpad_bl_init() -> backlight_device_register
++ *
++ * 2007/03/24 mrdata
++ *            - added .brightness=127 in
++ *              struct backlight_properties simpad_bl_props() 
++ */ 
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/platform_device.h>
++#include <linux/spinlock.h>
++#include <linux/fb.h>
++#include <linux/backlight.h>
++
++#include <asm/types.h>
++#include <asm/hardware.h>
++#include <asm/io.h>
++
++#include "../mq200/mq200_data.h"
++
++#define SIMPAD_BACKLIGHT_MASK 0x00a10044
++#define SIMPAD_DEFAULT_INTENSITY 127
++#define SIMPAD_MAX_INTENSITY 254
++#define REGISTER_BASE 0xf2e00000
++
++static int simpad_bl_suspended;
++static int current_intensity = 0;
++
++static void simpad_bl_send_intensity(struct backlight_device *bd)
++{
++	int intensity = bd->props.brightness;
++    
++	union fp0fr fp0fr;
++	unsigned long dutyCycle, pwmcontrol;
++    
++	if (intensity > SIMPAD_MAX_INTENSITY)
++    		intensity = SIMPAD_MAX_INTENSITY;
++
++	if (bd->props.power != FB_BLANK_UNBLANK)
++		intensity = 0;
++		
++	if (bd->props.fb_blank != FB_BLANK_UNBLANK)
++		intensity = 0;
++	
++	if (simpad_bl_suspended)
++		intensity = 0;
++	
++	if (intensity != current_intensity)
++	{	
++	    /*
++            * Determine dutyCycle.
++            * Note: the lower the value, the brighter the display!
++            */
++
++	    dutyCycle = SIMPAD_MAX_INTENSITY - intensity;
++
++    	    /*
++            * Configure PWM0 (source clock = oscillator clock, pwm always enabled,
++	    * zero, clock pre-divider = 4) pwm frequency = 12.0kHz
++	    */
++	 
++	    fp0fr.whole = readl(FP0FR(REGISTER_BASE));
++	    pwmcontrol = fp0fr.whole & 0xffff00ff;
++	    fp0fr.whole &= 0xffffff00;
++	    fp0fr.whole |= 0x00000044;
++	    writel(fp0fr.whole, FP0FR(REGISTER_BASE));
++
++	    /* Write to pwm duty cycle register.  */
++	    fp0fr.whole = dutyCycle << 8;
++	    fp0fr.whole &= 0x0000ff00;
++	    fp0fr.whole |= pwmcontrol;
++	    writel(fp0fr.whole, FP0FR(REGISTER_BASE));
++	    
++	    current_intensity = intensity;
++	}
++}
++
++
++#ifdef CONFIG_PM
++static int simpad_bl_suspend(struct platform_device *pdev, pm_message_t state)
++{
++	struct backlight_device *bd = platform_get_drvdata(pdev);
++
++	simpad_bl_suspended = 1;
++	simpad_bl_send_intensity(bd);
++	return 0;
++}
++
++static int simpad_bl_resume(struct platform_device *pdev)
++{
++	struct backlight_device *bd = platform_get_drvdata(pdev);
++
++	simpad_bl_suspended = 0;
++	simpad_bl_send_intensity(bd);
++	return 0;
++}
++#else
++#define simpad_bl_suspend NULL
++#define simpad_bl_resume  NULL
++#endif
++
++
++static int simpad_bl_set_intensity(struct backlight_device *bd)
++{
++	simpad_bl_send_intensity(bd);
++	return 0;
++}
++
++
++static int simpad_bl_get_intensity(struct backlight_device *bd)
++{
++	return current_intensity;
++}
++
++
++static struct backlight_ops simpad_bl_ops = {
++        .get_brightness = simpad_bl_get_intensity,
++	.update_status	= simpad_bl_set_intensity,
++};
++
++
++static int __init simpad_bl_probe(struct platform_device *pdev)
++{
++	struct backlight_device *bd;
++
++	bd = backlight_device_register("simpad-mq200-bl", &pdev->dev, NULL, &simpad_bl_ops);
++	
++	if (IS_ERR (bd))
++		return PTR_ERR (bd);
++	
++	platform_set_drvdata(pdev, bd);
++	
++	bd->props.max_brightness = SIMPAD_MAX_INTENSITY;
++	bd->props.brightness = SIMPAD_DEFAULT_INTENSITY;
++	simpad_bl_send_intensity(bd);
++	
++	return 0;
++}
++
++
++static int simpad_bl_remove(struct platform_device *pdev)
++{
++	struct backlight_device *bd = platform_get_drvdata(pdev);
++	
++	bd->props.brightness = 0;
++	bd->props.power = 0;
++	simpad_bl_send_intensity(bd);
++	
++	backlight_device_unregister(bd);
++	
++	return 0;
++}
++
++static struct platform_driver simpad_bl_driver = {
++	.probe		= simpad_bl_probe,
++	.remove		= simpad_bl_remove,
++	.suspend	= simpad_bl_suspend,
++	.resume		= simpad_bl_resume,
++	.driver		= {
++		.name	= "simpad-mq200-bl",
++	},
++};
++
++static struct platform_device *simpad_bl_device = NULL;
++
++static int __init simpad_bl_init(void)
++{
++	int ret;
++    
++	ret = platform_driver_register(&simpad_bl_driver);
++	if (!ret) {
++	        simpad_bl_device = platform_device_alloc("simpad-mq200-bl", -1);
++		if (!simpad_bl_device)
++		        return -ENOMEM;
++	    
++		ret = platform_device_add(simpad_bl_device);
++	    
++		if (ret) {
++		        platform_device_put(simpad_bl_device);
++			platform_driver_unregister(&simpad_bl_driver);
++		}
++	}
++	return ret;
++}
++
++static void __exit simpad_bl_exit(void)
++{
++	platform_device_unregister(simpad_bl_device);
++	platform_driver_unregister(&simpad_bl_driver);
++}
++
++
++module_init(simpad_bl_init);
++module_exit(simpad_bl_exit);
++MODULE_AUTHOR("Holger Hans Peter Freyther");
++MODULE_LICENSE("GPL");
+diff -uNr linux-2.6.21.vanilla/drivers/video/backlight/simpad_lcd.c linux-2.6.21/drivers/video/backlight/simpad_lcd.c
+--- linux-2.6.21.vanilla/drivers/video/backlight/simpad_lcd.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.21/drivers/video/backlight/simpad_lcd.c	2007-05-01 17:02:17.000000000 +0200
+@@ -0,0 +1,170 @@
++/*
++ * GPLv2 <zecke@handhelds.org
++ *
++ * Implementation of the lcd_driver for the mq200 framebuffer
++ *
++ * 2007/03/24 mrdata:
++ *            - added simpad_lcd_get_contrast()
++ *            - added simpad_lcd_set_contrast()
++ *            - modify struct lcd_properties simpad_lcd_props
++ */
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/platform_device.h>
++#include <linux/fb.h>
++#include <linux/lcd.h>
++
++#include <asm/arch/simpad.h>
++#include <asm/hardware.h>
++
++extern long get_cs3_shadow(void);
++extern void set_cs3_bit(int);
++extern void clear_cs3_bit(int);
++
++#define UNUSED(x) x=x
++
++static int simpad_lcd_get_power(struct lcd_device* dev)
++{
++	UNUSED(dev);
++
++	return (get_cs3_shadow() & DISPLAY_ON) ? 0 : 4;
++}
++
++static int simpad_lcd_set_power(struct lcd_device* dev, int power)
++{
++	UNUSED(dev);
++
++	if( power == 4 )
++		clear_cs3_bit(DISPLAY_ON);
++	else
++		set_cs3_bit(DISPLAY_ON);
++
++	return 0;
++}
++
++static int simpad_lcd_get_contrast(struct lcd_device* dev)
++{
++	UNUSED(dev);
++
++	return 0;
++}
++
++static int simpad_lcd_set_contrast(struct lcd_device* dev, int contrast)
++{
++	UNUSED(dev);
++
++	UNUSED(contrast);
++
++	return 0;
++}
++
++#ifdef CONFIG_PM
++static int simpad_lcd_suspend(struct platform_device *pdev, pm_message_t state)
++{
++	UNUSED(state);
++	static int ret;
++	<