x-load: Remove early (alpha) am3517 x-loader recipes and files

   * 1.41 for am3517 was test build - remove

Signed-off-by: Roger Monk <r-monk@ti.com>
Signed-off-by: Koen Kooi <k-kooi@ti.com>

11 files changed, 0 insertions, 2525 deletions

diff --git a/recipes/x-load/files/x-loader-03.00.00.01.tar.gz b/recipes/x-load/files/x-loader-03.00.00.01.tar.gz
deleted file mode 100755
index 60930c68d2..0000000000
--- a/recipes/x-load/files/x-loader-03.00.00.01.tar.gz
+++ /dev/null
diff --git a/recipes/x-load/files/xload-shiva.diff b/recipes/x-load/files/xload-shiva.diff
deleted file mode 100644
index d1535b682f..0000000000
--- a/recipes/x-load/files/xload-shiva.diff
+++ /dev/null
@@ -1,2106 +0,0 @@
-diff -Nurd git/Makefile x-load-shiva/Makefile
---- git/Makefile	2009-09-08 16:43:33.000000000 +0200
-+++ x-load-shiva/Makefile	2009-09-08 16:54:21.000000000 +0200
-@@ -156,6 +156,9 @@
- 
- 	@./mkconfig $(@:_config=) arm omap3 omap3530beagle
- 
-+omap3517evm_config :	unconfig
-+	 @./mkconfig $(@:_config=) arm omap3 omap3517evm
-+
- #########################################################################
- 
- clean:
-diff -Nurd git/board/omap3517evm/Makefile x-load-shiva/board/omap3517evm/Makefile
---- git/board/omap3517evm/Makefile	1970-01-01 01:00:00.000000000 +0100
-+++ x-load-shiva/board/omap3517evm/Makefile	2009-09-08 16:54:35.000000000 +0200
-@@ -0,0 +1,47 @@
-+#
-+# (C) Copyright 2000, 2001, 2002
-+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-+#
-+# See file CREDITS for list of people who contributed to this
-+# project.
-+#
-+# This program is free software; you can redistribute it and/or
-+# modify it under the terms of the GNU General Public License as
-+# published by the Free Software Foundation; either version 2 of
-+# the License, or (at your option) any later version.
-+#
-+# This program is distributed in the hope that it will be useful,
-+# but WITHOUT ANY WARRANTY; without even the implied warranty of
-+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+# GNU General Public License for more details.
-+#
-+# You should have received a copy of the GNU General Public License
-+# along with this program; if not, write to the Free Software
-+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+# MA 02111-1307 USA
-+#
-+
-+include $(TOPDIR)/config.mk
-+
-+LIB	= lib$(BOARD).a
-+
-+OBJS	:= omap3517evm.o 
-+SOBJS	:= platform.o
-+
-+$(LIB):	$(OBJS) $(SOBJS)
-+	$(AR) crv $@ $^
-+
-+clean:
-+	rm -f $(SOBJS) $(OBJS)
-+
-+distclean:	clean
-+	rm -f $(LIB) core *.bak .depend
-+
-+#########################################################################
-+
-+.depend:	Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
-+		$(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
-+
-+-include .depend
-+
-+#########################################################################
-diff -Nurd git/board/omap3517evm/config.mk x-load-shiva/board/omap3517evm/config.mk
---- git/board/omap3517evm/config.mk	1970-01-01 01:00:00.000000000 +0100
-+++ x-load-shiva/board/omap3517evm/config.mk	2009-09-08 16:56:20.000000000 +0200
-@@ -0,0 +1,19 @@
-+# (C) Copyright 2009
-+# Texas Instruments, <www.ti.com>
-+#
-+# OMAP3517EVM board uses OMAP3517 'shiva' (ARM-CortexA8) cpu
-+# see http://www.ti.com/ for more information on Texas Instruments#
-+#
-+# OMAP3517EVM has 1 bank of 128MB mPOP-SDRAM on CS0
-+# Physical Address:
-+# 8000'0000 (bank0)
-+
-+# For use if you want X-Loader to relocate from SRAM to DDR
-+#TEXT_BASE = 0x80e80000
-+
-+# For XIP in 64K of SRAM or debug (GP device has it all availabe)
-+# SRAM 40200000-4020FFFF base
-+# initial stack at 0x4020fffc used in s_init (below xloader).
-+# The run time stack is (above xloader, 2k below)
-+# If any globals exist there needs to be room for them also
-+TEXT_BASE = 0x40200800
-diff -Nurd git/board/omap3517evm/omap3517evm.c x-load-shiva/board/omap3517evm/omap3517evm.c
---- git/board/omap3517evm/omap3517evm.c	1970-01-01 01:00:00.000000000 +0100
-+++ x-load-shiva/board/omap3517evm/omap3517evm.c	2009-09-08 18:25:17.000000000 +0200
-@@ -0,0 +1,943 @@
-+/*
-+ * (C) Copyright 2009
-+ * Texas Instruments, <www.ti.com>
-+ * Manikandan Pillai<mani.pillai@ti.com>
-+ * This file is copied from board/omap3evm/omap3evm.c
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+#include <common.h>
-+#include <command.h>
-+#include <part.h>
-+#include <fat.h>
-+#include <asm/arch/cpu.h>
-+#include <asm/arch/bits.h>
-+#include <asm/arch/mux.h>
-+#include <asm/arch/sys_proto.h>
-+#include <asm/arch/sys_info.h>
-+#include <asm/arch/clocks.h>
-+#include <asm/arch/mem.h>
-+
-+/* Used to index into DPLL parameter tables */
-+struct dpll_param {
-+        unsigned int m;
-+        unsigned int n;
-+        unsigned int fsel;
-+        unsigned int m2;
-+};
-+
-+typedef struct dpll_param dpll_param;
-+
-+#define MAX_SIL_INDEX	3
-+
-+/* Definitions for EMIF4 configuration values */
-+#define	EMIF4_TIM1_T_RP		0x3
-+#define	EMIF4_TIM1_T_RCD	0x3
-+#define	EMIF4_TIM1_T_WR		0x3
-+#define	EMIF4_TIM1_T_RAS	0x8
-+#define	EMIF4_TIM1_T_RC		0xA
-+#define	EMIF4_TIM1_T_RRD	0x2
-+#define	EMIF4_TIM1_T_WTR	0x2
-+
-+#define	EMIF4_TIM2_T_XP		0x2
-+#define	EMIF4_TIM2_T_ODT	0x0
-+#define	EMIF4_TIM2_T_XSNR	0x1C
-+#define	EMIF4_TIM2_T_XSRD	0xC8
-+#define	EMIF4_TIM2_T_RTP	0x1
-+#define	EMIF4_TIM2_T_CKE	0x2
-+
-+#define	EMIF4_TIM3_T_TDQSCKMAX	0x0
-+#define	EMIF4_TIM3_T_RFC	0x25
-+#define	EMIF4_TIM3_T_RAS_MAX	0x7
-+
-+#define	EMIF4_PWR_IDLE		0x2
-+#define	EMIF4_PWR_DPD_EN	0x0
-+#define	EMIF4_PWR_PM_EN		0x0
-+#define	EMIF4_PWR_PM_TIM	0x0
-+
-+#define	EMIF4_INITREF_DIS	0x0
-+#define	EMIF4_PASR		0x0
-+#define	EMIF4_REFRESH_RATE	0x50F
-+
-+/*
-+ * SDRAM Config register
-+ */
-+#define	EMIF4_CFG_SDRAM_TYP	0x2
-+#define	EMIF4_CFG_IBANK_POS	0x0
-+#define	EMIF4_CFG_DDR_TERM	0x0
-+#define	EMIF4_CFG_DDR2_DDQS	0x1
-+#define	EMIF4_CFG_DYN_ODT	0x0
-+#define	EMIF4_CFG_DDR_DIS_DLL	0x0
-+#define	EMIF4_CFG_SDR_DRV	0x0
-+#define	EMIF4_CFG_CWL		0x0
-+#define	EMIF4_CFG_NARROW_MD	0x0
-+#define	EMIF4_CFG_CL		0x5
-+#define	EMIF4_CFG_ROWSIZE	0x0
-+#define	EMIF4_CFG_IBANK		0x3
-+#define	EMIF4_CFG_EBANK		0x0
-+#define	EMIF4_CFG_PGSIZE	0x2
-+
-+/*
-+ * EMIF4 PHY Control 1 register configuration
-+ */
-+#define EMIF4_DDR1_RD_LAT	0x6
-+#define	EMIF4_DDR1_PWRDN_DIS	0x1
-+#define EMIF4_DDR1_STRBEN_EXT	0x1
-+#define EMIF4_DDR1_DLL_MODE	0x0
-+#define EMIF4_DDR1_VTP_DYN	0x1
-+#define EMIF4_DDR1_LB_CK_SEL	0x0
-+
-+/*
-+ * EMIF4 PHY Control 2 register configuration
-+ */
-+#define EMIF4_DDR2_TX_DATA_ALIGN	0x0
-+#define EMIF4_DDR2_RX_DLL_BYPASS	0x0
-+
-+/* Following functions are exported from lowlevel_init.S */
-+extern dpll_param *get_mpu_dpll_param(void);
-+#if 0
-+extern dpll_param *get_iva_dpll_param(void);
-+#endif
-+extern dpll_param *get_core_dpll_param(void);
-+extern dpll_param *get_per_dpll_param(void);
-+
-+extern int mmc_init(int verbose);
-+extern block_dev_desc_t *mmc_get_dev(int dev);
-+
-+#define __raw_readl(a)    (*(volatile unsigned int *)(a))
-+#define __raw_writel(v,a) (*(volatile unsigned int *)(a) = (v))
-+#define __raw_readw(a)    (*(volatile unsigned short *)(a))
-+#define __raw_writew(v,a) (*(volatile unsigned short *)(a) = (v))
-+
-+/*******************************************************
-+ * Routine: delay
-+ * Description: spinning delay to use before udelay works
-+ ******************************************************/
-+static inline void delay(unsigned long loops)
-+{
-+	__asm__ volatile ("1:\n" "subs %0, %1, #1\n"
-+			  "bne 1b":"=r" (loops):"0"(loops));
-+}
-+
-+void udelay (unsigned long usecs) {
-+	delay(usecs);
-+}
-+
-+/*****************************************
-+ * Routine: board_init
-+ * Description: Early hardware init.
-+ *****************************************/
-+int board_init (void)
-+{
-+	return 0;
-+}
-+
-+/*************************************************************
-+ *  get_device_type(): tell if GP/HS/EMU/TST
-+ *************************************************************/
-+u32 get_device_type(void)
-+{
-+        int mode;
-+        mode = __raw_readl(CONTROL_STATUS) & (DEVICE_MASK);
-+        return(mode >>= 8);
-+}
-+
-+/************************************************
-+ * get_sysboot_value(void) - return SYS_BOOT[4:0]
-+ ************************************************/
-+u32 get_sysboot_value(void)
-+{
-+        int mode;
-+        mode = __raw_readl(CONTROL_STATUS) & (SYSBOOT_MASK);
-+        return mode;
-+}
-+/*************************************************************
-+ * Routine: get_mem_type(void) - returns the kind of memory connected
-+ * to GPMC that we are trying to boot form. Uses SYS BOOT settings.
-+ *************************************************************/
-+u32 get_mem_type(void)
-+{
-+        u32   mem_type = get_sysboot_value();
-+        switch (mem_type){
-+            case 0:
-+            case 2:
-+            case 4:
-+            case 16:
-+            case 22:    return GPMC_ONENAND;
-+
-+            case 1:
-+            case 12:
-+            case 15:
-+            case 21:
-+            case 27:    return GPMC_NAND;
-+
-+            case 3:
-+            case 6:     return MMC_ONENAND;
-+
-+            case 8:
-+            case 11:
-+            case 14:
-+            case 20:
-+            case 26:    return GPMC_MDOC;
-+
-+            case 17:
-+            case 18:
-+            case 24:	return MMC_NAND;
-+
-+            case 7:
-+            case 10:
-+            case 13:
-+            case 19:
-+            case 25:
-+            default:    return GPMC_NOR;
-+        }
-+}
-+
-+/******************************************
-+ * get_cpu_rev(void) - extract version info
-+ ******************************************/
-+u32 get_cpu_rev(void)
-+{
-+	u32 cpuid=0;
-+	/* On ES1.0 the IDCODE register is not exposed on L4
-+	 * so using CPU ID to differentiate
-+	 * between ES2.0 and ES1.0.
-+	 */
-+	__asm__ __volatile__("mrc p15, 0, %0, c0, c0, 0":"=r" (cpuid));
-+	if((cpuid  & 0xf) == 0x0)
-+		return CPU_3430_ES1;
-+	else
-+		return CPU_3430_ES2;
-+
-+}
-+
-+/*****************************************************************
-+ * sr32 - clear & set a value in a bit range for a 32 bit address
-+ *****************************************************************/
-+void sr32(u32 addr, u32 start_bit, u32 num_bits, u32 value)
-+{
-+	u32 tmp, msk = 0;
-+	msk = 1 << num_bits;
-+	--msk;
-+	tmp = __raw_readl(addr) & ~(msk << start_bit);
-+	tmp |=  value << start_bit;
-+	__raw_writel(tmp, addr);
-+}
-+
-+/*********************************************************************
-+ * wait_on_value() - common routine to allow waiting for changes in
-+ *   volatile regs.
-+ *********************************************************************/
-+u32 wait_on_value(u32 read_bit_mask, u32 match_value, u32 read_addr, u32 bound)
-+{
-+	u32 i = 0, val;
-+	do {
-+		++i;
-+		val = __raw_readl(read_addr) & read_bit_mask;
-+		if (val == match_value)
-+			return (1);
-+		if (i == bound)
-+			return (0);
-+	} while (1);
-+}
-+
-+/*********************************************************************
-+ * config_emif4_ddr() - Init/Configure DDR on OMAP3517 EVM board.
-+ *********************************************************************/
-+void config_emif4_ddr(void)
-+{
-+	unsigned int regval;
-+
-+	/* Set the DDR PHY parameters in PHY ctrl registers */
-+	regval = (EMIF4_DDR1_RD_LAT | (EMIF4_DDR1_PWRDN_DIS << 6) |
-+		(EMIF4_DDR1_STRBEN_EXT << 7) | (EMIF4_DDR1_DLL_MODE << 12) |
-+		(EMIF4_DDR1_VTP_DYN << 15) | (EMIF4_DDR1_LB_CK_SEL << 23));
-+	__raw_writel(regval, EMIF4_DDR_PHYCTL1);
-+	__raw_writel(regval, EMIF4_DDR_PHYCTL1_SHDW);
-+
-+	regval = (EMIF4_DDR2_TX_DATA_ALIGN | (EMIF4_DDR2_RX_DLL_BYPASS << 1));
-+	__raw_writel(regval, EMIF4_DDR_PHYCTL2);
-+
-+	/* Reset the DDR PHY and wait till completed */
-+	sr32(EMIF4_IODFT_TLGC, 10, 1, 1);
-+	/*Wait till that bit clears*/
-+	while ((__raw_readl(EMIF4_IODFT_TLGC) & BIT10) == 0x1);
-+	/*Re-verify the DDR PHY status*/
-+	while ((__raw_readl(EMIF4_SDRAM_STS) & BIT2) == 0x0);
-+
-+	sr32(EMIF4_IODFT_TLGC, 0, 1, 1);
-+	/* Set SDR timing registers */
-+	regval = (EMIF4_TIM1_T_WTR | (EMIF4_TIM1_T_RRD << 3) |
-+		(EMIF4_TIM1_T_RC << 6) | (EMIF4_TIM1_T_RAS << 12) |
-+		(EMIF4_TIM1_T_WR << 17) | (EMIF4_TIM1_T_RCD << 21) |
-+		(EMIF4_TIM1_T_RP << 25));
-+	__raw_writel(regval, EMIF4_SDRAM_TIM1);
-+	__raw_writel(regval, EMIF4_SDRAM_TIM1_SHDW);
-+
-+	regval = (EMIF4_TIM2_T_CKE | (EMIF4_TIM2_T_RTP << 3) |
-+		(EMIF4_TIM2_T_XSRD << 6) | (EMIF4_TIM2_T_XSNR << 16) |
-+		(EMIF4_TIM2_T_ODT << 25) | (EMIF4_TIM2_T_XP << 28));
-+	__raw_writel(regval, EMIF4_SDRAM_TIM2);
-+	__raw_writel(regval, EMIF4_SDRAM_TIM2_SHDW);
-+
-+	regval = (EMIF4_TIM3_T_RAS_MAX | (EMIF4_TIM3_T_RFC << 4) |
-+		(EMIF4_TIM3_T_TDQSCKMAX << 13));
-+	__raw_writel(regval, EMIF4_SDRAM_TIM3);
-+	__raw_writel(regval, EMIF4_SDRAM_TIM3_SHDW);
-+
-+	/* Set the PWR control register */
-+	regval = (EMIF4_PWR_PM_TIM | (EMIF4_PWR_PM_EN << 8) |
-+		(EMIF4_PWR_DPD_EN << 10) | (EMIF4_PWR_IDLE << 30));
-+	__raw_writel(regval, EMIF4_PWR_MGT_CTRL);
-+	__raw_writel(regval, EMIF4_PWR_MGT_CTRL_SHDW);
-+
-+	/* Set the DDR refresh rate control register */
-+	regval = (EMIF4_REFRESH_RATE | (EMIF4_PASR << 24) |
-+		(EMIF4_INITREF_DIS << 31));
-+	__raw_writel(regval, EMIF4_SDRAM_RFCR);
-+	__raw_writel(regval, EMIF4_SDRAM_RFCR_SHDW);
-+
-+	/* set the SDRAM configuration register */
-+	regval = (EMIF4_CFG_PGSIZE | (EMIF4_CFG_EBANK << 3) |
-+		(EMIF4_CFG_IBANK << 4) | (EMIF4_CFG_ROWSIZE << 7) |
-+		(EMIF4_CFG_CL << 10) | (EMIF4_CFG_NARROW_MD << 14) |
-+		(EMIF4_CFG_CWL << 16) | (EMIF4_CFG_SDR_DRV << 18) |
-+		(EMIF4_CFG_DDR_DIS_DLL << 20) | (EMIF4_CFG_DYN_ODT << 21) |
-+		(EMIF4_CFG_DDR2_DDQS << 23) | (EMIF4_CFG_DDR_TERM << 24) |
-+		(EMIF4_CFG_IBANK_POS << 27) | (EMIF4_CFG_SDRAM_TYP << 29));
-+	__raw_writel(regval, EMIF4_SDRAM_CFG);
-+}
-+
-+/*************************************************************
-+ * get_sys_clk_speed - determine reference oscillator speed
-+ *  based on known 32kHz clock and gptimer.
-+ *************************************************************/
-+u32 get_osc_clk_speed(void)
-+{
-+	u32 start, cstart, cend, cdiff, val;
-+
-+	val = __raw_readl(PRM_CLKSRC_CTRL);
-+	/* If SYS_CLK is being divided by 2, remove for now */
-+	val = (val & (~BIT7)) | BIT6;
-+	__raw_writel(val, PRM_CLKSRC_CTRL);
-+
-+	/* enable timer2 */
-+	val = __raw_readl(CM_CLKSEL_WKUP) | BIT0;
-+	__raw_writel(val, CM_CLKSEL_WKUP);	/* select sys_clk for GPT1 */
-+
-+	/* Enable I and F Clocks for GPT1 */
-+	val = __raw_readl(CM_ICLKEN_WKUP) | BIT0 | BIT2;
-+	__raw_writel(val, CM_ICLKEN_WKUP);
-+	val = __raw_readl(CM_FCLKEN_WKUP) | BIT0;
-+	__raw_writel(val, CM_FCLKEN_WKUP);
-+
-+	__raw_writel(0, OMAP34XX_GPT1 + TLDR);	/* start counting at 0 */
-+	__raw_writel(GPT_EN, OMAP34XX_GPT1 + TCLR);     /* enable clock */
-+	/* enable 32kHz source *//* enabled out of reset */
-+	/* determine sys_clk via gauging */
-+
-+	start = 20 + __raw_readl(S32K_CR);	/* start time in 20 cycles */
-+	while (__raw_readl(S32K_CR) < start);	/* dead loop till start time */
-+	cstart = __raw_readl(OMAP34XX_GPT1 + TCRR);	/* get start sys_clk count */
-+	while (__raw_readl(S32K_CR) < (start + 20));	/* wait for 40 cycles */
-+	cend = __raw_readl(OMAP34XX_GPT1 + TCRR);	/* get end sys_clk count */
-+	cdiff = cend - cstart;				/* get elapsed ticks */
-+
-+	/* based on number of ticks assign speed */
-+	if (cdiff > 19000)
-+		return (S38_4M);
-+	else if (cdiff > 15200)
-+		return (S26M);
-+	else if (cdiff > 13000)
-+		return (S24M);
-+	else if (cdiff > 9000)
-+		return (S19_2M);
-+	else if (cdiff > 7600)
-+		return (S13M);
-+	else
-+		return (S12M);
-+}
-+
-+/******************************************************************************
-+ * get_sys_clkin_sel() - returns the sys_clkin_sel field value based on
-+ *   -- input oscillator clock frequency.
-+ *
-+ *****************************************************************************/
-+void get_sys_clkin_sel(u32 osc_clk, u32 *sys_clkin_sel)
-+{
-+	if(osc_clk == S38_4M)
-+		*sys_clkin_sel=  4;
-+	else if(osc_clk == S26M)
-+		*sys_clkin_sel = 3;
-+	else if(osc_clk == S19_2M)
-+		*sys_clkin_sel = 2;
-+	else if(osc_clk == S13M)
-+		*sys_clkin_sel = 1;
-+	else if(osc_clk == S12M)
-+		*sys_clkin_sel = 0;
-+}
-+
-+/******************************************************************************
-+ * prcm_init() - inits clocks for PRCM as defined in clocks.h
-+ *   -- called from SRAM, or Flash (using temp SRAM stack).
-+ *****************************************************************************/
-+void prcm_init(void)
-+{
-+	u32 osc_clk=0, sys_clkin_sel;
-+	dpll_param *dpll_param_p;
-+	u32 clk_index, sil_index;
-+
-+	/* Gauge the input clock speed and find out the sys_clkin_sel
-+	 * value corresponding to the input clock.
-+	 */
-+	osc_clk = get_osc_clk_speed();
-+	get_sys_clkin_sel(osc_clk, &sys_clkin_sel);
-+
-+	sr32(PRM_CLKSEL, 0, 3, sys_clkin_sel); /* set input crystal speed */
-+
-+	/* If the input clock is greater than 19.2M always divide/2 */
-+	if(sys_clkin_sel > 2) {
-+		sr32(PRM_CLKSRC_CTRL, 6, 2, 2);/* input clock divider */
-+		clk_index = sys_clkin_sel/2;
-+	} else {
-+		sr32(PRM_CLKSRC_CTRL, 6, 2, 1);/* input clock divider */
-+		clk_index = sys_clkin_sel;
-+	}
-+
-+	/* The DPLL tables are defined according to sysclk value and
-+	 * silicon revision. The clk_index value will be used to get
-+	 * the values for that input sysclk from the DPLL param table
-+	 * and sil_index will get the values for that SysClk for the
-+	 * appropriate silicon rev.
-+	 */
-+	sil_index = get_cpu_rev() - 1;
-+
-+	/* Unlock MPU DPLL (slows things down, and needed later) */
-+	sr32(CM_CLKEN_PLL_MPU, 0, 3, PLL_LOW_POWER_BYPASS);
-+	wait_on_value(BIT0, 0, CM_IDLEST_PLL_MPU, LDELAY);
-+
-+	/* Getting the base address of Core DPLL param table*/
-+	dpll_param_p = (dpll_param *)get_core_dpll_param();
-+	/* Moving it to the right sysclk and ES rev base */
-+	dpll_param_p = dpll_param_p + 2*clk_index + sil_index;
-+	/* CORE DPLL */
-+	/* sr32(CM_CLKSEL2_EMU) set override to work when asleep */
-+	sr32(CM_CLKEN_PLL, 0, 3, PLL_FAST_RELOCK_BYPASS);
-+	wait_on_value(BIT0, 0, CM_IDLEST_CKGEN, LDELAY);
-+	sr32(CM_CLKSEL1_EMU, 16, 5, CORE_M3X2);	/* m3x2 */
-+	sr32(CM_CLKSEL1_PLL, 27, 2, dpll_param_p->m2);	/* Set M2 */
-+	sr32(CM_CLKSEL1_PLL, 16, 11, dpll_param_p->m);	/* Set M */
-+	sr32(CM_CLKSEL1_PLL, 8, 7, dpll_param_p->n);	/* Set N */
-+	sr32(CM_CLKSEL1_PLL, 6, 1, 0);			/* 96M Src */
-+	sr32(CM_CLKSEL_CORE, 2, 2, CORE_L4_DIV);	/* l4 */
-+	sr32(CM_CLKSEL_CORE, 0, 2, CORE_L3_DIV);	/* l3 */
-+	sr32(CM_CLKSEL_WKUP, 1, 2, WKUP_RSM);		/* reset mgr */
-+	sr32(CM_CLKEN_PLL, 4, 4, dpll_param_p->fsel);	/* FREQSEL */
-+	sr32(CM_CLKEN_PLL, 0, 3, PLL_LOCK);		/* lock mode */
-+	wait_on_value(BIT0, 1, CM_IDLEST_CKGEN, LDELAY);
-+
-+	/* Getting the base address to PER  DPLL param table*/
-+	dpll_param_p = (dpll_param *)get_per_dpll_param();
-+	/* Moving it to the right sysclk base */
-+	dpll_param_p = dpll_param_p + clk_index;
-+	/* PER DPLL */
-+	sr32(CM_CLKEN_PLL, 16, 3, PLL_STOP);
-+	wait_on_value(BIT1, 0, CM_IDLEST_CKGEN, LDELAY);
-+	sr32(CM_CLKSEL1_EMU, 24, 5, PER_M6X2);	/* set M6 */
-+	sr32(CM_CLKSEL_CAM, 0, 5, PER_M5X2);	/* set M5 */
-+	sr32(CM_CLKSEL_DSS, 0, 5, PER_M4X2);	/* set M4 */
-+	sr32(CM_CLKSEL_DSS, 8, 5, PER_M3X2);	/* set M3 */
-+	sr32(CM_CLKSEL3_PLL, 0, 5, dpll_param_p->m2);	/* set M2 */
-+	sr32(CM_CLKSEL2_PLL, 8, 11, dpll_param_p->m);	/* set m */
-+	sr32(CM_CLKSEL2_PLL, 0, 7, dpll_param_p->n);	/* set n */
-+	sr32(CM_CLKEN_PLL, 20, 4, dpll_param_p->fsel);/* FREQSEL */
-+	sr32(CM_CLKEN_PLL, 16, 3, PLL_LOCK);	/* lock mode */
-+	wait_on_value(BIT1, 2, CM_IDLEST_CKGEN, LDELAY);
-+
-+	/* Getting the base address to MPU DPLL param table*/
-+	dpll_param_p = (dpll_param *)get_mpu_dpll_param();
-+	/* Moving it to the right sysclk and ES rev base */
-+	dpll_param_p = dpll_param_p + 2*clk_index + sil_index;
-+	/* MPU DPLL (unlocked already) */
-+	sr32(CM_CLKSEL2_PLL_MPU, 0, 5, dpll_param_p->m2);	/* Set M2 */
-+	sr32(CM_CLKSEL1_PLL_MPU, 8, 11, dpll_param_p->m);	/* Set M */
-+	sr32(CM_CLKSEL1_PLL_MPU, 0, 7, dpll_param_p->n);	/* Set N */
-+	sr32(CM_CLKEN_PLL_MPU, 4, 4, dpll_param_p->fsel);	/* FREQSEL */
-+	sr32(CM_CLKEN_PLL_MPU, 0, 3, PLL_LOCK); /* lock mode */
-+	wait_on_value(BIT0, 1, CM_IDLEST_PLL_MPU, LDELAY);
-+
-+	/* Set up GPTimers to sys_clk source only */
-+ 	sr32(CM_CLKSEL_PER, 0, 8, 0xff);
-+	sr32(CM_CLKSEL_WKUP, 0, 1, 1);
-+
-+	delay(5000);
-+}
-+
-+/*****************************************
-+ * Routine: secure_unlock
-+ * Description: Setup security registers for access
-+ * (GP Device only)
-+ *****************************************/
-+void secure_unlock(void)
-+{
-+	/* Permission values for registers -Full fledged permissions to all */
-+	#define UNLOCK_1 0xFFFFFFFF
-+	#define UNLOCK_2 0x00000000
-+	#define UNLOCK_3 0x0000FFFF
-+	/* Protection Module Register Target APE (PM_RT)*/
-+	__raw_writel(UNLOCK_1, RT_REQ_INFO_PERMISSION_1);
-+	__raw_writel(UNLOCK_1, RT_READ_PERMISSION_0);
-+	__raw_writel(UNLOCK_1, RT_WRITE_PERMISSION_0);
-+	__raw_writel(UNLOCK_2, RT_ADDR_MATCH_1);
-+
-+	__raw_writel(UNLOCK_3, GPMC_REQ_INFO_PERMISSION_0);
-+	__raw_writel(UNLOCK_3, GPMC_READ_PERMISSION_0);
-+	__raw_writel(UNLOCK_3, GPMC_WRITE_PERMISSION_0);
-+
-+	__raw_writel(UNLOCK_3, OCM_REQ_INFO_PERMISSION_0);
-+	__raw_writel(UNLOCK_3, OCM_READ_PERMISSION_0);
-+	__raw_writel(UNLOCK_3, OCM_WRITE_PERMISSION_0);
-+	__raw_writel(UNLOCK_2, OCM_ADDR_MATCH_2);
-+
-+	__raw_writel(UNLOCK_1, SMS_RG_ATT0); /* SDRC region 0 public */
-+}
-+
-+/**********************************************************
-+ * Routine: try_unlock_sram()
-+ * Description: If chip is GP type, unlock the SRAM for
-+ *  general use.
-+ ***********************************************************/
-+void try_unlock_memory(void)
-+{
-+	int mode;
-+
-+	/* if GP device unlock device SRAM for general use */
-+	/* secure code breaks for Secure/Emulation device - HS/E/T*/
-+	mode = get_device_type();
-+	if (mode == GP_DEVICE) {
-+		secure_unlock();
-+	}
-+	return;
-+}
-+
-+/**********************************************************
-+ * Routine: s_init
-+ * Description: Does early system init of muxing and clocks.
-+ * - Called at time when only stack is available.
-+ **********************************************************/
-+
-+void s_init(void)
-+{
-+	watchdog_init();
-+#ifdef CONFIG_3430_AS_3410
-+	/* setup the scalability control register for
-+	 * 3430 to work in 3410 mode
-+	 */
-+	__raw_writel(0x5ABF,CONTROL_SCALABLE_OMAP_OCP);
-+#endif
-+	try_unlock_memory();
-+	set_muxconf_regs();
-+	delay(100);
-+	prcm_init();
-+	per_clocks_enable();
-+
-+	/* enable the DDRPHY clk */
-+	sr32((OMAP34XX_CTRL_BASE + 0x588), 15, 15, 0x1);
-+	/* enable the EMIF4 clk */
-+	sr32((OMAP34XX_CTRL_BASE + 0x588), 14, 14, 0x1);
-+	/* Enable the peripheral clocks */
-+	sr32((OMAP34XX_CTRL_BASE + 0x59C), 0, 4, 0xF);
-+	sr32((OMAP34XX_CTRL_BASE + 0x59C), 8, 10, 0x7);
-+
-+	/* bring cpgmac out of reset */
-+	sr32((OMAP34XX_CTRL_BASE + 0x598), 1, 1, 0x1);
-+
-+	/* Configure the EMIF4 for our DDR */
-+	config_emif4_ddr();
-+}
-+
-+/*******************************************************
-+ * Routine: misc_init_r
-+ * Description: Init ethernet (done here so udelay works)
-+ ********************************************************/
-+int misc_init_r (void)
-+{
-+	return(0);
-+}
-+
-+/******************************************************
-+ * Routine: wait_for_command_complete
-+ * Description: Wait for posting to finish on watchdog
-+ ******************************************************/
-+void wait_for_command_complete(unsigned int wd_base)
-+{
-+	int pending = 1;
-+	do {
-+		pending = __raw_readl(wd_base + WWPS);
-+	} while (pending);
-+}
-+
-+/****************************************
-+ * Routine: watchdog_init
-+ * Description: Shut down watch dogs
-+ *****************************************/
-+void watchdog_init(void)
-+{
-+	/* There are 3 watch dogs WD1=Secure, WD2=MPU, WD3=IVA. WD1 is
-+	 * either taken care of by ROM (HS/EMU) or not accessible (GP).
-+	 * We need to take care of WD2-MPU or take a PRCM reset.  WD3
-+	 * should not be running and does not generate a PRCM reset.
-+	 */
-+	sr32(CM_FCLKEN_WKUP, 5, 1, 1);
-+	sr32(CM_ICLKEN_WKUP, 5, 1, 1);
-+	wait_on_value(BIT5, 0x20, CM_IDLEST_WKUP, 5); /* some issue here */
-+
-+	__raw_writel(WD_UNLOCK1, WD2_BASE + WSPR);
-+	wait_for_command_complete(WD2_BASE);
-+	__raw_writel(WD_UNLOCK2, WD2_BASE + WSPR);
-+}
-+
-+/**********************************************
-+ * Routine: dram_init
-+ * Description: sets uboots idea of sdram size
-+ **********************************************/
-+int dram_init (void)
-+{
-+	return 0;
-+}
-+
-+/*****************************************************************
-+ * Routine: peripheral_enable
-+ * Description: Enable the clks & power for perifs (GPT2, UART1,...)
-+ ******************************************************************/
-+void per_clocks_enable(void)
-+{
-+	/* Enable GP2 timer. */
-+	sr32(CM_CLKSEL_PER, 0, 1, 0x1); /* GPT2 = sys clk */
-+	sr32(CM_ICLKEN_PER, 3, 1, 0x1); /* ICKen GPT2 */
-+	sr32(CM_FCLKEN_PER, 3, 1, 0x1); /* FCKen GPT2 */
-+
-+#ifdef CFG_NS16550
-+	/* Enable UART1 clocks */
-+	sr32(CM_FCLKEN1_CORE, 13, 1, 0x1);
-+	sr32(CM_ICLKEN1_CORE, 13, 1, 0x1);
-+
-+	/* Enable UART2 clocks */
-+	sr32(CM_FCLKEN1_CORE, 14, 1, 0x1);
-+	sr32(CM_ICLKEN1_CORE, 14, 1, 0x1);
-+
-+	/* Enable UART2 clocks */
-+	sr32(CM_FCLKEN_PER, 11, 1, 0x1);
-+	sr32(CM_ICLKEN_PER, 11, 1, 0x1);
-+#endif
-+	/* Enable MMC1 clocks */
-+	sr32(CM_FCLKEN1_CORE, 24, 1, 0x1);
-+	sr32(CM_ICLKEN1_CORE, 24, 1, 0x1);
-+
-+	/* Enable MMC2 clocks */
-+	sr32(CM_FCLKEN1_CORE, 25, 1, 0x1);
-+	sr32(CM_ICLKEN1_CORE, 25, 1, 0x1);
-+
-+	delay(1000);
-+}
-+
-+/* Set MUX for UART, GPMC, SDRC, GPIO */
-+
-+#define 	MUX_VAL(OFFSET,VALUE)\
-+		__raw_writew((VALUE), OMAP34XX_CTRL_BASE + (OFFSET));
-+
-+#define		CP(x)	(CONTROL_PADCONF_##x)
-+/*
-+ * IEN  - Input Enable
-+ * IDIS - Input Disable
-+ * PTD  - Pull type Down
-+ * PTU  - Pull type Up
-+ * DIS  - Pull type selection is inactive
-+ * EN   - Pull type selection is active
-+ * M0   - Mode 0
-+ * The commented string gives the final mux configuration for that pin
-+ */
-+#define MUX_DEFAULT()\
-+	MUX_VAL(CP(SDRC_D0),        (IEN  | PTD | DIS | M0)) /*SDRC_D0*/\
-+	MUX_VAL(CP(SDRC_D1),        (IEN  | PTD | DIS | M0)) /*SDRC_D1*/\
-+	MUX_VAL(CP(SDRC_D2),        (IEN  | PTD | DIS | M0)) /*SDRC_D2*/\
-+	MUX_VAL(CP(SDRC_D3),        (IEN  | PTD | DIS | M0)) /*SDRC_D3*/\
-+	MUX_VAL(CP(SDRC_D4),        (IEN  | PTD | DIS | M0)) /*SDRC_D4*/\
-+	MUX_VAL(CP(SDRC_D5),        (IEN  | PTD | DIS | M0)) /*SDRC_D5*/\
-+	MUX_VAL(CP(SDRC_D6),        (IEN  | PTD | DIS | M0)) /*SDRC_D6*/\
-+	MUX_VAL(CP(SDRC_D7),        (IEN  | PTD | DIS | M0)) /*SDRC_D7*/\
-+	MUX_VAL(CP(SDRC_D8),        (IEN  | PTD | DIS | M0)) /*SDRC_D8*/\
-+	MUX_VAL(CP(SDRC_D9),        (IEN  | PTD | DIS | M0)) /*SDRC_D9*/\
-+	MUX_VAL(CP(SDRC_D10),       (IEN  | PTD | DIS | M0)) /*SDRC_D10*/\
-+	MUX_VAL(CP(SDRC_D11),       (IEN  | PTD | DIS | M0)) /*SDRC_D11*/\
-+	MUX_VAL(CP(SDRC_D12),       (IEN  | PTD | DIS | M0)) /*SDRC_D12*/\
-+	MUX_VAL(CP(SDRC_D13),       (IEN  | PTD | DIS | M0)) /*SDRC_D13*/\
-+	MUX_VAL(CP(SDRC_D14),       (IEN  | PTD | DIS | M0)) /*SDRC_D14*/\
-+	MUX_VAL(CP(SDRC_D15),       (IEN  | PTD | DIS | M0)) /*SDRC_D15*/\
-+	MUX_VAL(CP(SDRC_D16),       (IEN  | PTD | DIS | M0)) /*SDRC_D16*/\
-+	MUX_VAL(CP(SDRC_D17),       (IEN  | PTD | DIS | M0)) /*SDRC_D17*/\
-+	MUX_VAL(CP(SDRC_D18),       (IEN  | PTD | DIS | M0)) /*SDRC_D18*/\
-+	MUX_VAL(CP(SDRC_D19),       (IEN  | PTD | DIS | M0)) /*SDRC_D19*/\
-+	MUX_VAL(CP(SDRC_D20),       (IEN  | PTD | DIS | M0)) /*SDRC_D20*/\
-+	MUX_VAL(CP(SDRC_D21),       (IEN  | PTD | DIS | M0)) /*SDRC_D21*/\
-+	MUX_VAL(CP(SDRC_D22),       (IEN  | PTD | DIS | M0)) /*SDRC_D22*/\
-+	MUX_VAL(CP(SDRC_D23),       (IEN  | PTD | DIS | M0)) /*SDRC_D23*/\
-+	MUX_VAL(CP(SDRC_D24),       (IEN  | PTD | DIS | M0)) /*SDRC_D24*/\
-+	MUX_VAL(CP(SDRC_D25),       (IEN  | PTD | DIS | M0)) /*SDRC_D25*/\
-+	MUX_VAL(CP(SDRC_D26),       (IEN  | PTD | DIS | M0)) /*SDRC_D26*/\
-+	MUX_VAL(CP(SDRC_D27),       (IEN  | PTD | DIS | M0)) /*SDRC_D27*/\
-+	MUX_VAL(CP(SDRC_D28),       (IEN  | PTD | DIS | M0)) /*SDRC_D28*/\
-+	MUX_VAL(CP(SDRC_D29),       (IEN  | PTD | DIS | M0)) /*SDRC_D29*/\
-+	MUX_VAL(CP(SDRC_D30),       (IEN  | PTD | DIS | M0)) /*SDRC_D30*/\
-+	MUX_VAL(CP(SDRC_D31),       (IEN  | PTD | DIS | M0)) /*SDRC_D31*/\
-+	MUX_VAL(CP(SDRC_CLK),       (IEN  | PTD | DIS | M0)) /*SDRC_CLK*/\
-+	MUX_VAL(CP(SDRC_DQS0),      (IEN  | PTD | DIS | M0)) /*SDRC_DQS0*/\
-+	MUX_VAL(CP(SDRC_DQS1),      (IEN  | PTD | DIS | M0)) /*SDRC_DQS1*/\
-+	MUX_VAL(CP(SDRC_DQS2),      (IEN  | PTD | DIS | M0)) /*SDRC_DQS2*/\
-+	MUX_VAL(CP(SDRC_DQS3),      (IEN  | PTD | DIS | M0)) /*SDRC_DQS3*/\
-+	MUX_VAL(CP(sdrc_cke0),      (M0)) /*SDRC_CKE0*/\
-+	MUX_VAL(CP(sdrc_cke1),      (M0)) /*SDRC_CKE1*/\
-+	MUX_VAL(CP(GPMC_A1),        (IDIS | PTD | DIS | M0)) /*GPMC_A1*/\
-+	MUX_VAL(CP(GPMC_A2),        (IDIS | PTD | DIS | M0)) /*GPMC_A2*/\
-+	MUX_VAL(CP(GPMC_A3),        (IDIS | PTD | DIS | M0)) /*GPMC_A3*/\
-+	MUX_VAL(CP(GPMC_A4),        (IDIS | PTD | DIS | M0)) /*GPMC_A4*/\
-+	MUX_VAL(CP(GPMC_A5),        (IDIS | PTD | DIS | M0)) /*GPMC_A5*/\
-+	MUX_VAL(CP(GPMC_A6),        (IDIS | PTD | DIS | M0)) /*GPMC_A6*/\
-+	MUX_VAL(CP(GPMC_A7),        (IDIS | PTD | DIS | M0)) /*GPMC_A7*/\
-+	MUX_VAL(CP(GPMC_A8),        (IDIS | PTD | DIS | M0)) /*GPMC_A8*/\
-+	MUX_VAL(CP(GPMC_A9),        (IDIS | PTD | DIS | M0)) /*GPMC_A9*/\
-+	MUX_VAL(CP(GPMC_A10),       (IDIS | PTD | DIS | M0)) /*GPMC_A10*/\
-+	MUX_VAL(CP(GPMC_D0),        (IEN  | PTD | DIS | M0)) /*GPMC_D0*/\
-+	MUX_VAL(CP(GPMC_D1),        (IEN  | PTD | DIS | M0)) /*GPMC_D1*/\
-+	MUX_VAL(CP(GPMC_D2),        (IEN  | PTD | DIS | M0)) /*GPMC_D2*/\
-+	MUX_VAL(CP(GPMC_D3),        (IEN  | PTD | DIS | M0)) /*GPMC_D3*/\
-+	MUX_VAL(CP(GPMC_D4),        (IEN  | PTD | DIS | M0)) /*GPMC_D4*/\
-+	MUX_VAL(CP(GPMC_D5),        (IEN  | PTD | DIS | M0)) /*GPMC_D5*/\
-+	MUX_VAL(CP(GPMC_D6),        (IEN  | PTD | DIS | M0)) /*GPMC_D6*/\
-+	MUX_VAL(CP(GPMC_D7),        (IEN  | PTD | DIS | M0)) /*GPMC_D7*/\
-+	MUX_VAL(CP(GPMC_D8),        (IEN  | PTD | DIS | M0)) /*GPMC_D8*/\
-+	MUX_VAL(CP(GPMC_D9),        (IEN  | PTD | DIS | M0)) /*GPMC_D9*/\
-+	MUX_VAL(CP(GPMC_D10),       (IEN  | PTD | DIS | M0)) /*GPMC_D10*/\
-+	MUX_VAL(CP(GPMC_D11),       (IEN  | PTD | DIS | M0)) /*GPMC_D11*/\
-+	MUX_VAL(CP(GPMC_D12),       (IEN  | PTD | DIS | M0)) /*GPMC_D12*/\
-+	MUX_VAL(CP(GPMC_D13),       (IEN  | PTD | DIS | M0)) /*GPMC_D13*/\
-+	MUX_VAL(CP(GPMC_D14),       (IEN  | PTD | DIS | M0)) /*GPMC_D14*/\
-+	MUX_VAL(CP(GPMC_D15),       (IEN  | PTD | DIS | M0)) /*GPMC_D15*/\
-+	MUX_VAL(CP(GPMC_nCS0),      (IDIS | PTU | EN  | M0)) /*GPMC_nCS0*/\
-+	MUX_VAL(CP(GPMC_nCS1),      (IDIS | PTU | EN  | M0)) /*GPMC_nCS1*/\
-+	MUX_VAL(CP(GPMC_nCS2),      (IDIS | PTU | EN  | M0)) /*GPMC_nCS2*/\
-+	MUX_VAL(CP(GPMC_nCS3),      (IDIS | PTU | EN  | M0)) /*GPMC_nCS3*/\
-+	MUX_VAL(CP(GPMC_nCS4),      (IDIS | PTU | EN  | M0)) /*GPMC_nCS4*/\
-+	MUX_VAL(CP(GPMC_nCS5),      (IDIS | PTU | EN  | M0)) /*GPMC_nCS5*/\
-+	MUX_VAL(CP(GPMC_nCS6),      (IDIS | PTU | EN  | M0)) /*GPMC_nCS6*/\
-+	MUX_VAL(CP(GPMC_nCS7),      (IDIS | PTU | EN  | M0)) /*GPMC_nCS7*/\
-+	MUX_VAL(CP(GPMC_CLK),       (IDIS | PTD | DIS | M0)) /*GPMC_CLK*/\
-+	MUX_VAL(CP(GPMC_nADV_ALE),  (IDIS | PTD | DIS | M0)) /*GPMC_nADV_ALE*/\
-+	MUX_VAL(CP(GPMC_nOE),       (IDIS | PTD | DIS | M0)) /*GPMC_nOE*/\
-+	MUX_VAL(CP(GPMC_nWE),       (IDIS | PTD | DIS | M0)) /*GPMC_nWE*/\
-+	MUX_VAL(CP(GPMC_nBE0_CLE),  (IDIS | PTD | DIS | M0)) /*GPMC_nBE0_CLE*/\
-+	MUX_VAL(CP(GPMC_nBE1),      (IDIS | PTD | DIS | M4)) /*GPIO_61*/\
-+	MUX_VAL(CP(GPMC_nWP),       (IEN  | PTD | DIS | M0)) /*GPMC_nWP*/\
-+	MUX_VAL(CP(GPMC_WAIT0),     (IEN  | PTU | EN  | M0)) /*GPMC_WAIT0*/\
-+	MUX_VAL(CP(GPMC_WAIT1),     (IEN  | PTU | EN  | M0)) /*GPMC_WAIT1*/\
-+	MUX_VAL(CP(GPMC_WAIT2),     (IEN  | PTU | EN  | M4)) /*GPIO_64*/\
-+	MUX_VAL(CP(GPMC_WAIT3),     (IEN  | PTU | EN  | M4)) /*GPIO_65*/\
-+	MUX_VAL(CP(DSS_DATA18),     (IEN  | PTD | DIS | M4)) /*GPIO_88*/\
-+	MUX_VAL(CP(DSS_DATA19),     (IEN  | PTD | DIS | M4)) /*GPIO_89*/\
-+	MUX_VAL(CP(DSS_DATA20),     (IEN  | PTD | DIS | M4)) /*GPIO_90*/\
-+	MUX_VAL(CP(DSS_DATA21),     (IEN  | PTD | DIS | M4)) /*GPIO_91*/\
-+	MUX_VAL(CP(CAM_WEN),        (IEN  | PTD | DIS | M4)) /*GPIO_167*/\
-+	MUX_VAL(CP(UART3_TX_IRTX),       (IDIS | PTD | DIS | M0)) /*UART1_TX*/\
-+	MUX_VAL(CP(UART3_RTS_SD),      (IDIS | PTD | DIS | M0)) /*UART1_RTS*/\
-+	MUX_VAL(CP(UART3_CTS_RCTX),      (IEN | PTU | DIS | M0)) /*UART1_CTS*/\
-+	MUX_VAL(CP(UART3_RX_IRRX),       (IEN | PTD | DIS | M0)) /*UART1_RX*/\
-+	/*Expansion card  */\
-+	MUX_VAL(CP(MMC1_CLK),          (IEN  | PTU | EN  | M0)) /*MMC1_CLK*/\
-+	MUX_VAL(CP(MMC1_CMD),          (IEN  | PTU | DIS | M0)) /*MMC1_CMD*/\
-+	MUX_VAL(CP(MMC1_DAT0),         (IEN  | PTU | DIS | M0)) /*MMC1_DAT0*/\
-+	MUX_VAL(CP(MMC1_DAT1),         (IEN  | PTU | DIS | M0)) /*MMC1_DAT1*/\
-+	MUX_VAL(CP(MMC1_DAT2),         (IEN  | PTU | DIS | M0)) /*MMC1_DAT2*/\
-+	MUX_VAL(CP(MMC1_DAT3),         (IEN  | PTU | DIS | M0)) /*MMC1_DAT3*/\
-+	MUX_VAL(CP(MMC1_DAT4),         (IEN  | PTU | DIS | M0)) /*MMC1_DAT4*/\
-+	MUX_VAL(CP(MMC1_DAT5),         (IEN  | PTU | DIS | M0)) /*MMC1_DAT5*/\
-+	MUX_VAL(CP(MMC1_DAT6),         (IEN  | PTU | DIS | M0)) /*MMC1_DAT6*/\
-+	MUX_VAL(CP(MMC1_DAT7),         (IEN  | PTU | DIS | M0)) /*MMC1_DAT7*/\
-+	MUX_VAL(CP(McBSP1_DX),      (IEN  | PTD | DIS | M4)) /*GPIO_158*/\
-+	MUX_VAL(CP(SYS_32K),        (IEN  | PTD | DIS | M0)) /*SYS_32K*/\
-+	MUX_VAL(CP(SYS_BOOT0),      (IEN  | PTD | DIS | M4)) /*GPIO_2 */\
-+	MUX_VAL(CP(SYS_BOOT1),      (IEN  | PTD | DIS | M4)) /*GPIO_3 */\
-+	MUX_VAL(CP(SYS_BOOT2),      (IEN  | PTD | DIS | M4)) /*GPIO_4 */\<