Remove mts-io and mt-dt-overlay, which are not MACHINE dependent

6 files changed, 0 insertions, 557 deletions

diff --git a/recipes-bsp/multitech/mts-io/led-status_heartbeat_trigger b/recipes-bsp/multitech/mts-io/led-status_heartbeat_trigger
deleted file mode 100755
index 88910df..0000000
--- a/recipes-bsp/multitech/mts-io/led-status_heartbeat_trigger
+++ /dev/null
@@ -1,6 +0,0 @@
-#!/bin/bash
-
-TRIGGER="/sys/class/leds/led-status/trigger"
-
-echo "setting $TRIGGER to heartbeat"
-echo "heartbeat" > $TRIGGER
diff --git a/recipes-bsp/multitech/mts-io/lora-led-updater b/recipes-bsp/multitech/mts-io/lora-led-updater
deleted file mode 100755
index 0e38310..0000000
--- a/recipes-bsp/multitech/mts-io/lora-led-updater
+++ /dev/null
@@ -1,14 +0,0 @@
-#!/bin/bash
-
-while true; do
-  # If driver is unloaded, stop.
-  [[ -d /sys/devices/platform/mts-io ]] || exit 0
-  fuser /dev/spidev0.0 > /dev/null
-  if [ $? == 0 ]; then
-    mts-io-sysfs store led-lora 1 >/dev/null 2>&1
-  else
-    mts-io-sysfs store led-lora 0 >/dev/null 2>&1
-  fi
-  sleep 5
-done
-
diff --git a/recipes-bsp/multitech/mts-io/mts-io.blacklist b/recipes-bsp/multitech/mts-io/mts-io.blacklist
deleted file mode 100644
index 7421ac4..0000000
--- a/recipes-bsp/multitech/mts-io/mts-io.blacklist
+++ /dev/null
@@ -1 +0,0 @@
-blacklist mts-io
diff --git a/recipes-bsp/multitech/mts-io/mts-io.conf b/recipes-bsp/multitech/mts-io/mts-io.conf
deleted file mode 100644
index b5b4275..0000000
--- a/recipes-bsp/multitech/mts-io/mts-io.conf
+++ /dev/null
@@ -1,9 +0,0 @@
-# GPS GNSS reset when loading driver
-# 1 Reset the GPS on driver load (default)
-# 0 Do not reset
-GPSGNSSRESET=1
-
-# DEBUG
-# 0 is off
-# 1 is on
-DEBUG=0
diff --git a/recipes-bsp/multitech/mts-io/mts-io.init b/recipes-bsp/multitech/mts-io/mts-io.init
deleted file mode 100755
index 966d5ae..0000000
--- a/recipes-bsp/multitech/mts-io/mts-io.init
+++ /dev/null
@@ -1,405 +0,0 @@
-#!/bin/bash
-### BEGIN INIT INFO
-# Provides: mts-io
-# Default-Start:  S
-# Default-Stop:
-# Short-Description: load the mts-io driver
-# Description: mts-io driver initializes the Conduit hardware and
-#	       provides user mode access through the driver to the
-#	       Conduit features.
-### END INIT INFO
-
-. /etc/default/mts-io
-
-i2c=/sys/bus/i2c/devices/
-GPSCONFIGTYPE="/var/run/config/gpstype"
-DEVTREE="/sys/kernel/config/device-tree/overlays/"
-
-((fail=0))
-# To log debug, set LOGDBG to /usr/bin/LOGGER
-if ((DEBUG)) ; then
-	LOGDBG=/usr/bin/logger
-	${LOGDBG} -t "mts-io" -p daemon.info -s "LOGDBG turned on"
-else
-	LOGDBG=":"
-fi	
-
-hw=""
-hw_name=""
-MTAC_MODULES=""
-((HASAP=0))
-
-sethwtype() {
-    # mts-io must be loaded before trying this
-    hw=$(${SYSFS} show hw-version)
-    hw_name=(${hw//-/ })
-   
-    # Only MTCDT and MTCDTIP have accessory cards, and
-    # MTCDTIPHP does not have accessory cards.
-    ((HASAP==0))
-    case $hw_name in
-    MTCDTIPHP)
-        ;;
-    MTCDT|MTCDTIP)
-        ((HASAP = 1))
-        ;;
-    *)
-        ;;
-    esac
-    MTAC_MODULES=$(cd /lib/modules/$(uname -r)/extra/;ls mtac_* 2>/dev/null)
-}
-
-setdevtree() {
-    # add device tree overlays, if they exist.
-    [[ -d /lib/dtoverlays ]] || return 1
-    (
-	cd /lib/dtoverlays
-	for f in $(ls ${hw}*) ; do
-            if ! [[ -d ${DEVTREE} ]] ; then
-		mount configfs
-	    fi
-	    f1=${f/#${hw}-/}
-	    f2=${f1/%.dtbo}
-            # f2 is the extracted device name
-            /bin/mkdir ${DEVTREE}/$f2
-	    /bin/cat $f >${DEVTREE}/$f2/dtbo
-	done
-    )
-}
-
-
-SYSFS="/usr/sbin/mts-io-sysfs"
-LRST="/usr/sbin/mts-util-lora2-reset"
-
-${LOGDBG} -p daemon.info 'mts-io script'
-sysdir=/sys/devices/platform/mts-io
-gpiodir=/sys/class/gpio
-port1=${sysdir}/ap1            
-port2=${sysdir}/ap2                             
-
-USBRST=${sysdir}/usbhub-reset
-NEED_I2C_RESET=0
-HWVER=""
-HWNAME=""
-HWLVL=""
-
-
-RST[0]="${sysdir}/wifi-bt-reset"
-RST[1]="${sysdir}/mtq-reset"
-RST[2]="${sysdir}/ap1/reset"
-RST[3]="${sysdir}/ap1/creset"
-RST[4]="${sysdir}/ap2/reset"
-RST[5]="${sysdir}/ap2/creset"
-RST[6]="${sysdir}/secure-reset"
-RST[7]="${sysdir}/eth-reset"
-RST[8]="${sysdir}/sm1-reset"
-
-# GPSGNSSRESET is now set low during boot and is special cased.
-#if ((GPSGNSSRESET)) ; then
-#	RST[9]="${sysdir}/gnss-reset"
-#fi
-
-WPIN[0]="${sysdir}/ap1/cdone"
-WPIN[1]="${sysdir}/ap2/cdone"
-
-USLPTIME=60000 # 30 milliseconds from Redpine Signals Reset Spec
-WAIT="/bin/busybox usleep ${USLPTIME}"
-
-# Wait 10 WAIT intervals for pins to come high
-waitpins() {
-    ((i=0))
-    while((i < ${#WPIN[@]})) ; do
-	((j=0))
-	while [[ -r ${WPIN[$i]} ]] && ! (($(cat ${WPIN[$i]}))) ; do
-		logger -t "mts-io" -p daemon.error -s "Wait on ${WPIN[$i]}"
-		${WAIT}
-		((j++))
-		if ((j > 10)) ; then
-			((fail++))
-			${LOGDBG} -t "mts-io" -p daemon.error -s "Ready failure on ${WPIN[$i]}"
-			break
-		fi
-	done
-	((i++))
-    done
-}
-
-reset_path() {
-	pin=$1
-	${LOGDBG} -t "mts-io" -p daemon.info Reset $pin
-	if [[ -f ${pin} ]] ; then
-		if ! ( (echo 1 >${pin}) && ${WAIT} && (echo 0 >${pin}) && ${WAIT} && (echo 1 >${pin}) ) ; then
-			/usr/bin/logger -t "mts-io" -p daemon.error -s "Failed write to ${pin}"
-			return 1
-		fi
-		sleep 2
-		
-	        ${LOGDBG} -t "mts-io" -p daemon.info Completeed reset $pin
-	else
-		${LOGDBG} -t "mts-io" -p daemon.info "${pin} does not exist"
-	fi
-	return 0
-}
-reset_array() {
-	((i=${#RST[@]}-1))
-	while ((i>=0)) ; do
-		if [[ -f ${RST[$i]} ]] ; then
-			if ! ( (echo 1 >${RST[i]}) ) ; then
-				/usr/bin/logger -t "mts-io" -p daemon.error -s "Failed write to ${RST[$i]}"
-				fail=1
-			else
-				${LOGDBG} -t "mts-io" -p daemon.error -s "Wrote 1 to ${RST[$i]}"
-			fi
-		else
-			${LOGDBG} -t "mts-io" -p daemon.info "${RST[$i]} does not exist"
-			RST[$i]=""
-		fi
-		((i--))
-	done
-	((DBG)) && (cd $sysdir ; head gnss-reset eth-reset wifi-bt-reset usbhub-reset  | logger -p daemon.info)
-	((i=${#RST[@]}-1))
-	while ((i>=0)) ; do
-		${LOGDBG} -s -p daemon.info "i value is $i RST is ${RST[$i]} count is ${#RST[$i]}"
-		if ((${#RST[$i]} > 0)) && [[ -f ${RST[$i]} ]] ; then
-			if ! ( (echo 0 >${RST[i]}) ) ; then
-				/usr/bin/logger -t "mts-io" -p daemon.error -s "Failed write to ${RST[$i]}"
-				fail=1
-			else
-				${LOGDBG} -t "mts-io" -p daemon.error -s "Wrote 0 to ${RST[$i]}"
-				:
-			fi
-		else
-			${LOGDBG} -t "mts-io" -p daemon.info "${RST[$i]} does not exist"
-		fi
-		((i--))
-	done
-	${WAIT}
-	((DBG)) && (cd $sysdir ; head gnss-reset eth-reset wifi-bt-reset usbhub-reset  | logger -p daemon.info)
-	((i=${#RST[@]}-1))
-	while ((i>=0)) ; do
-		if ((${#RST[$i]} > 0)) && [[ -f ${RST[$i]} ]] ; then
-			if ! ( (echo 1 >${RST[$i]}) ) ; then
-				/usr/bin/logger -t "mts-io" -p daemon.error -s "Failed write to ${RST[$i]}"
-				fail=1
-			else
-				${LOGDBG} -t "mts-io" -p daemon.error -s "Wrote 1 to ${RST[$i]}"
-			fi
-		else
-			${LOGDBG} -t "mts-io" -p daemon.info "${RST[$i]} does not exist"
-		fi
-		((i--))
-	done
-	((DBG)) && (cd $sysdir ; head gnss-reset eth-reset wifi-bt-reset usbhub-reset  | logger -p daemon.info)
-	return $fail
-}
-read_card_info() {
-  ap1_product_id=""
-  ap2_product_id=""
-
-  if [[ -d $sysdir/ap1 ]]; then
-    ap1_product_id=$(cat $sysdir/ap1/product-id)
-  fi
-  if [[ -d $sysdir/ap2 ]]; then
-    ap2_product_id=$(cat $sysdir/ap2/product-id)
-  fi
-
-  lora_hw=$(${SYSFS} show lora/hw-version 2> /dev/null)
-
-  if [ -d $port1 ] && [[ $(cat $port1/hw-version) = $lora_hw ]]; then
-    modprobe spidev
-    ln -sf /dev/spidev32766.2 /dev/spidev0.0                  
-  elif [ -d $port2 ] && [[ $(cat $port2/hw-version) = $lora_hw ]]; then
-    modprobe spidev
-    ln -sf /dev/spidev32765.2 /dev/spidev0.0                          
-  elif [[ ${hw_name} == MTCAP ]]; then
-    modprobe spidev
-  elif [[ ${hw_name} == MTCDTIPHP ]]; then
-    modprobe spidev
-    ln -sf /dev/spidev32766.2 /dev/spidev0.0                  
-  fi      
-}
-
-mfser_init() {
-  found_ap1=0
-
-  if [[ $ap1_product_id =~ ^MTAC-MFSER- ]]; then
-    /usr/bin/logger -t "mts-io" -p daemon.info -s "Linking /dev/mfser to /dev/ttyAP1"
-    ln -sf /dev/ttyAP1 /dev/mfser
-    found_ap1=1
-  fi
-
-  if [[ $ap2_product_id =~ ^MTAC-MFSER- ]]; then
-    if [[ $found_ap1 = 1 ]]; then
-      /usr/bin/logger -t "mts-io" -p daemon.info -s "Linking /dev/mfser-2 to /dev/ttyAP2"
-      ln -sf /dev/ttyAP2 /dev/mfser-2
-    else
-      /usr/bin/logger -t "mts-io" -p daemon.info -s "Linking /dev/mfser to /dev/ttyAP2"
-      ln -sf /dev/ttyAP2 /dev/mfser
-    fi
-  fi
-
-}
-
-set_gpslink() {
-    [[ -d /var/run/config ]] || mkdir /var/run/config
-    gpscap=$(cat ${sysdir}/capability/gps)
-
-    # For all hardware except MTCDTIPHP, the gpscapability
-    # flag indicates whether or not we have a GPS.
-    if ! [[ ${hw_name} =~ ^MTCDTIPHP$ ]] && ((gpscap == 0)) ; then
-        return
-    fi
-    
-    # Oldest MTRV1 uses venuse on ttyS1.
-    if [[ ${hw_name} == MTRV1 ]] && [[ ${hw} != MTRV1-0.0 ]] ; then
-        ln -sf /dev/ttyXRUSB0 /dev/gps0
-        echo "u-blox" >"$GPSCONFIGTYPE"
-        return
-    fi
-    
-    if [[ ${hw_name} == MTR ]] || [[ ${hw_name} == MTRV1 ]] || [[ ${hw_name} == MTHS ]] ; then
-        ln -sf /dev/ttyS1 /dev/gps0
-        echo "venus" >"$GPSCONFIGTYPE"
-        return
-    fi
-    
-    if [[ ${hw} == MTCDT ]] && [[ ${HWLVL} ==  0.0 ]] ; then
-        # No GPS
-        return
-    fi
-    if [[ ${hw_name} == MTCDTIPHP ]] ; then
-	NEED_I2C_RESET=1
-        ln -sf /dev/ttyXRUSB0 /dev/gps0
-        return
-    fi
-    # Default MTCDT-0.1
-    echo "u-blox" >"$GPSCONFIGTYPE"
-    ln -sf /dev/ttyXRUSB2 /dev/gps0
-}
-
-case $1 in
-  start)
-    # Point the firmware API at our i2c EEPROMs
-    echo -n ${i2c} > /sys/module/firmware_class/parameters/path
-
-    /usr/bin/logger -t "mts-io" -p daemon.info -s "Loading mts-io module"
-    if ! modprobe mts_io ; then
-    	((fail++))
-    fi
-
-    sethwtype
-    setdevtree
-    
-    if ((HASAP == 1)) ; then
-        # install mtac explicitly or any unused modules will cause
-        # junk to the log as mtac is loaded and unloaded each time.
-        modprobe mtac
-        for f in ${MTAC_MODULES} ; do
-            modprobe ${f//.ko} 2>&1 | grep -v 'No such device or address'
-        done
-    fi
-    set_gpslink # Set GPS symlink.
-    /usr/bin/logger -t "mts-io" -p daemon.info -s "Resetting system modules"
-    read_card_info
-    has_gnss_reset=0
-    # On boot, gnss-reset will be low
-    if [[ -f ${sysdir}/gnss-reset ]] ; then
-	if (($(mts-io-sysfs show gnss-reset) == 1)) ; then
-		mts-io-sysfs store gnss-reset 0
-	fi
-        has_gnss_reset=1
-    fi
-    /bin/busybox usleep $USLPTIME
-    reset_array
-    if ((has_gnss_reset)) ; then
-        mts-io-sysfs store gnss-reset 1
-    fi
-    # use radio-reset init script for radio-reset
-    mfser_init
-
-    waitpins
-    # Fix Telit error -62 and Redpine wrong USB speed detection on reset.
-    sleep 1
-    if ! reset_path $USBRST  ; then
-    	((fail++))
-    fi
-
-    if ((${#lora_hw} > 0)) && [[ ${lora_hw} =~ ^MTCDTIPHP-LORA-2\.1 ]] ; then
-      if [[ -x ${LRST} ]] ; then
-      	${LRST} -g -f
-      else
-        /usr/bin/logger -t "mts-io" -p daemon.err -s "ERROR: Missing ${LRST} -- Cannot initialize LoRa."
-      fi
-    fi
-
-    if [[ -d ${DEVTREE} ]] ; then
-        /bin/umount configfs
-    fi
- 
-    if ((fail == 0)) ; then
-        echo "OK"
-    else
-        echo "FAIL"
-    fi
-    exit $fail
-    ;;
-
-  stop)
-    /usr/bin/logger -t "mts-io" -p daemon.info -s "Unloading mtac modules and mts-io module"
-    MTAC_MODULES=$(lsmod | grep '^mtac_' | sed  -e 's/_/-/' -e 's/ .*//')
-
-    for f in ${MTAC_MODULES} ; do
-        if ! modprobe -r "$f" ; then
-            rmmod "$f"
-        fi
-    done
-    if ! modprobe -r mtac ; then
-            rmmod mtac
-    fi
-
-    if ! modprobe -r mts-io ; then
-	rmmod mtsio
-    fi
-    RETVAL=$?
-    if ((RETVAL == 0)) ; then
-        echo "OK"
-    else
-        echo "FAIL"
-    fi
-    ;;
-  restart)
-    $0 stop   
-    sleep 1              
-    $0 start    
-  	;;
-  reload)
-    /usr/bin/logger -t "mts-io" -p daemon.info -s "Resetting system modules"
-    if ! reset_path $USBRST  ; then
-    	((fail++))
-    fi
-    /bin/busybox usleep $USLPTIME
-    reset_array
-    # Use radio-reset init script for radio-reset
-    mfser_init
-    if ((fail == 0)) ; then
-        echo "OK"
-    else
-        echo "FAIL"
-    fi
-    exit $fail
-    ;;
-  status)
-  	if [[ -d ${sysdir} ]] ; then
-  		echo Driver is loaded
-  		exit 0
-  	else
-  		echo Driver is not loaded
-  		exit 3
-  	fi
-  	;;
-  *)
-    echo "Usage: $0 {start|stop|status|restart}"
-    exit 2
-    ;;
-esac
-
diff --git a/recipes-bsp/multitech/mts-io/mts-io.mtcap.init b/recipes-bsp/multitech/mts-io/mts-io.mtcap.init
deleted file mode 100644
index 2642de9..0000000
--- a/recipes-bsp/multitech/mts-io/mts-io.mtcap.init
+++ /dev/null
@@ -1,122 +0,0 @@
-#!/bin/bash
-
-sysdir=/sys/devices/platform/mts-io
-
-i2c=/sys/bus/i2c/devices/
-
-DEVTREE="/sys/kernel/config/device-tree/overlays/"
-SYSFS="/usr/sbin/mts-io-sysfs"
-
-setwificap() {
-  WIFICAP=0
-  if  [[ -f ${sysdir}/capability/wifi ]] && (($(cat ${sysdir}/capability/wifi) == 1)) ; then
-    WIFICAP=1
-  fi
-}
-
-lora_init() {
-  # reset lora chip
-  mts-io-sysfs store lora/reset 1
-  mts-io-sysfs store lora/reset 0
-  usleep 100000
-  mts-io-sysfs store lora/reset 1
-}
-
-eth_init() {
-  # reset eth phy
-  mts-io-sysfs store eth-reset 1
-  mts-io-sysfs store eth-reset 0
-  usleep 100000
-  mts-io-sysfs store eth-reset 1
-}
-
-# Normal state when powered up
-wifi_init1() {
-  (($WIFICAP)) || return 0
-  # reset wlan
-  mts-io-sysfs store wlan-rst 0
-  # disable wlan
-  mts-io-sysfs store wlan-en 0
-}
-  
-wifi_init2() {
-  (($WIFICAP)) || return 0
-  mts-io-sysfs store wlan-en 1
-  usleep 30000  # 30mS according to WILC1000 spec.
-  mts-io-sysfs store wlan-rst 1
-}
-
-
-cell_init() {
-  # remove /dev/modem_at[0,1] symlinks
-  rm -f /dev/modem_at[0,1]
-
-  if [ -w /sys/devices/platform/mts-io/radio-power ] ; then
-    # power down the cellular chip gracefully
-    mts-io-sysfs store radio-power 0
-    # power up the cellular chip
-    mts-io-sysfs store radio-power 1
-  fi
-}
-
-start_lora_led_updater() {
-  lora-led-updater &
-}
-
-setdevtree() {
-    hw=$(${SYSFS} show hw-version)
-
-    # add device tree overlays, if they exist.
-    [[ -d /lib/dtoverlays ]] || return 1
-    (
-	cd /lib/dtoverlays
-	for f in $(ls ${hw}*) ; do
-            if ! [[ -d ${DEVTREE} ]] ; then
-		mount configfs
-	    fi
-	    f1=${f/#${hw}-/}
-	    f2=${f1/%.dtbo}
-            # f2 is the extracted device name
-            /bin/mkdir ${DEVTREE}/$f2
-	    /bin/cat $f >${DEVTREE}/$f2/dtbo
-	done
-    )
-}
-
-case $1 in
-  start)
-    # SPI driver for LoRa
-    modprobe spidev
-    # Point the firmware API at our i2c EEPROMs
-    echo -n ${i2c} > /sys/module/firmware_class/parameters/path
-    echo "Loading mts-io module"
-    modprobe -r atmel_mci
-    # Point the firmware API at our i2c EEPROMs
-    echo -n ${i2c} > /sys/module/firmware_class/parameters/path
-    modprobe mts_io
-	setdevtree
-    setwificap
-    wifi_init1
-    lora_init
-    eth_init
-    cell_init &
-    start_lora_led_updater
-    wifi_init2
-    modprobe atmel_mci
-    (($WIFICAP)) && modprobe wilc1000
-    (($WIFICAP)) && modprobe wilc1000-sdio
-    ;;
-
-  stop)
-    echo "Unloading mts-io module"
-    wifi_init1  # Power down wifi
-    modprobe -r wilc1000 >/dev/null 2>&1
-    modprobe -r wilc1000-sdio >/dev/null 2>&1
-    modprobe -r mts_io >/dev/null 2>&1
-    ;;
-
-  *)
-    echo "Usage: $0 {start|stop}"
-    exit 2
-    ;;
-esac