1 files changed, 0 insertions, 122 deletions
diff --git a/recipes-bsp/multitech/mts-io/mts-io.mtcap.init b/recipes-bsp/multitech/mts-io/mts-io.mtcap.init
deleted file mode 100644
index 2642de9..0000000
--- a/recipes-bsp/multitech/mts-io/mts-io.mtcap.init
+++ /dev/null
@@ -1,122 +0,0 @@
-#!/bin/bash
-
-sysdir=/sys/devices/platform/mts-io
-
-i2c=/sys/bus/i2c/devices/
-
-DEVTREE="/sys/kernel/config/device-tree/overlays/"
-SYSFS="/usr/sbin/mts-io-sysfs"
-
-setwificap() {
-  WIFICAP=0
-  if  [[ -f ${sysdir}/capability/wifi ]] && (($(cat ${sysdir}/capability/wifi) == 1)) ; then
-    WIFICAP=1
-  fi
-}
-
-lora_init() {
-  # reset lora chip
-  mts-io-sysfs store lora/reset 1
-  mts-io-sysfs store lora/reset 0
-  usleep 100000
-  mts-io-sysfs store lora/reset 1
-}
-
-eth_init() {
-  # reset eth phy
-  mts-io-sysfs store eth-reset 1
-  mts-io-sysfs store eth-reset 0
-  usleep 100000
-  mts-io-sysfs store eth-reset 1
-}
-
-# Normal state when powered up
-wifi_init1() {
-  (($WIFICAP)) || return 0
-  # reset wlan
-  mts-io-sysfs store wlan-rst 0
-  # disable wlan
-  mts-io-sysfs store wlan-en 0
-}
-  
-wifi_init2() {
-  (($WIFICAP)) || return 0
-  mts-io-sysfs store wlan-en 1
-  usleep 30000  # 30mS according to WILC1000 spec.
-  mts-io-sysfs store wlan-rst 1
-}
-
-
-cell_init() {
-  # remove /dev/modem_at[0,1] symlinks
-  rm -f /dev/modem_at[0,1]
-
-  if [ -w /sys/devices/platform/mts-io/radio-power ] ; then
-    # power down the cellular chip gracefully
-    mts-io-sysfs store radio-power 0
-    # power up the cellular chip
-    mts-io-sysfs store radio-power 1
-  fi
-}
-
-start_lora_led_updater() {
-  lora-led-updater &
-}
-
-setdevtree() {
-    hw=$(${SYSFS} show hw-version)
-
-    # add device tree overlays, if they exist.
-    [[ -d /lib/dtoverlays ]] || return 1
-    (
-	cd /lib/dtoverlays
-	for f in $(ls ${hw}*) ; do
-            if ! [[ -d ${DEVTREE} ]] ; then
-		mount configfs
-	    fi
-	    f1=${f/#${hw}-/}
-	    f2=${f1/%.dtbo}
-            # f2 is the extracted device name
-            /bin/mkdir ${DEVTREE}/$f2
-	    /bin/cat $f >${DEVTREE}/$f2/dtbo
-	done
-    )
-}
-
-case $1 in
-  start)
-    # SPI driver for LoRa
-    modprobe spidev
-    # Point the firmware API at our i2c EEPROMs
-    echo -n ${i2c} > /sys/module/firmware_class/parameters/path
-    echo "Loading mts-io module"
-    modprobe -r atmel_mci
-    # Point the firmware API at our i2c EEPROMs
-    echo -n ${i2c} > /sys/module/firmware_class/parameters/path
-    modprobe mts_io
-	setdevtree
-    setwificap
-    wifi_init1
-    lora_init
-    eth_init
-    cell_init &
-    start_lora_led_updater
-    wifi_init2
-    modprobe atmel_mci
-    (($WIFICAP)) && modprobe wilc1000
-    (($WIFICAP)) && modprobe wilc1000-sdio
-    ;;
-
-  stop)
-    echo "Unloading mts-io module"
-    wifi_init1  # Power down wifi
-    modprobe -r wilc1000 >/dev/null 2>&1
-    modprobe -r wilc1000-sdio >/dev/null 2>&1
-    modprobe -r mts_io >/dev/null 2>&1
-    ;;
-
-  *)
-    echo "Usage: $0 {start|stop}"
-    exit 2
-    ;;
-esac