1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
|
From a8adb8e29aba9d2c83731839063f1381fce3906c Mon Sep 17 00:00:00 2001
From: Syed Mohammed Khasim <khasim@ti.com>
Date: Sun, 11 Apr 2010 17:44:39 +0200
Subject: [PATCH 26/37] Enable DSS driver for Beagle
Configures DSS to display color bar on Svideo
Configures DSS to display background color on DVID
Signed-off-by: Syed Mohammed Khasim <khasim@ti.com>
---
board/ti/beagle/beagle.c | 12 ++++++
board/ti/beagle/beagle.h | 75 ++++++++++++++++++++++++++++++++++++++++
include/configs/omap3_beagle.h | 1 +
3 files changed, 88 insertions(+), 0 deletions(-)
diff --git a/board/ti/beagle/beagle.c b/board/ti/beagle/beagle.c
index 7cb6d1f..eb57b5a 100644
--- a/board/ti/beagle/beagle.c
+++ b/board/ti/beagle/beagle.c
@@ -141,6 +141,16 @@ unsigned int get_expansion_id(void)
}
/*
+ * Configure DSS to display background color on DVID
+ * Configure VENC to display color bar on S-Video
+ */
+void display_init(void)
+{
+ omap3_dss_venc_config(&venc_config_std_tv, VENC_HEIGHT, VENC_WIDTH);
+ omap3_dss_panel_config(&dvid_cfg);
+}
+
+/*
* Routine: misc_init_r
* Description: Configure board specific parts
*/
@@ -188,6 +198,7 @@ int misc_init_r(void)
twl4030_power_init();
twl4030_led_init(TWL4030_LED_LEDEN_LEDAON | TWL4030_LED_LEDEN_LEDBON);
+ display_init();
switch (beagle_revision) {
case REVISION_AXBX:
@@ -233,6 +244,7 @@ int misc_init_r(void)
GPIO15 | GPIO14 | GPIO13 | GPIO12, &gpio5_base->setdataout);
dieid_num_r();
+ omap3_dss_enable();
return 0;
}
diff --git a/board/ti/beagle/beagle.h b/board/ti/beagle/beagle.h
index ec4f831..69f9398 100644
--- a/board/ti/beagle/beagle.h
+++ b/board/ti/beagle/beagle.h
@@ -23,6 +23,8 @@
#ifndef _BEAGLE_H_
#define _BEAGLE_H_
+#include <asm/arch/dss.h>
+
const omap3_sysinfo sysinfo = {
DDR_STACKED,
"OMAP3 Beagle board",
@@ -433,4 +435,77 @@ const omap3_sysinfo sysinfo = {
MUX_VAL(CP(MCBSP3_DR), (IEN | PTD | DIS | M4)) /*GPIO_142*/\
MUX_VAL(CP(MCBSP3_CLKX), (IEN | PTD | DIS | M4)) /*GPIO_141*/\
+/*
+ * Display Configuration
+ */
+
+#define DVI_BEAGLE_ORANGE_COL 0x00FF8000
+#define VENC_HEIGHT 0x00ef
+#define VENC_WIDTH 0x027f
+
+/*
+ * Configure VENC in DSS for Beagle to generate Color Bar
+ *
+ * Kindly refer to OMAP TRM for definition of these values.
+ */
+static const struct venc_regs venc_config_std_tv = {
+ .status = 0x0000001B,
+ .f_control = 0x00000040,
+ .vidout_ctrl = 0x00000000,
+ .sync_ctrl = 0x00008000,
+ .llen = 0x00008359,
+ .flens = 0x0000020C,
+ .hfltr_ctrl = 0x00000000,
+ .cc_carr_wss_carr = 0x043F2631,
+ .c_phase = 0x00000024,
+ .gain_u = 0x00000130,
+ .gain_v = 0x00000198,
+ .gain_y = 0x000001C0,
+ .black_level = 0x0000006A,
+ .blank_level = 0x0000005C,
+ .x_color = 0x00000000,
+ .m_control = 0x00000001,
+ .bstamp_wss_data = 0x0000003F,
+ .s_carr = 0x21F07C1F,
+ .line21 = 0x00000000,
+ .ln_sel = 0x00000015,
+ .l21__wc_ctl = 0x00001400,
+ .htrigger_vtrigger = 0x00000000,
+ .savid__eavid = 0x069300F4,
+ .flen__fal = 0x0016020C,
+ .lal__phase_reset = 0x00060107,
+ .hs_int_start_stop_x = 0x008D034E,
+ .hs_ext_start_stop_x = 0x000F0359,
+ .vs_int_start_x = 0x01A00000,
+ .vs_int_stop_x__vs_int_start_y = 0x020501A0,
+ .vs_int_stop_y__vs_ext_start_x = 0x01AC0024,
+ .vs_ext_stop_x__vs_ext_start_y = 0x020D01AC,
+ .vs_ext_stop_y = 0x00000006,
+ .avid_start_stop_x = 0x03480079,
+ .avid_start_stop_y = 0x02040024,
+ .fid_int_start_x__fid_int_start_y = 0x0001008A,
+ .fid_int_offset_y__fid_ext_start_x = 0x01AC0106,
+ .fid_ext_start_y__fid_ext_offset_y = 0x01060006,
+ .tvdetgp_int_start_stop_x = 0x00140001,
+ .tvdetgp_int_start_stop_y = 0x00010001,
+ .gen_ctrl = 0x00FF0000,
+ .output_control = 0x0000000D,
+ .dac_b__dac_c = 0x00000000
+};
+
+/*
+ * Configure Timings for DVI D
+ */
+static const struct panel_config dvid_cfg = {
+ .timing_h = 0x0ff03f31, /* Horizantal timing */
+ .timing_v = 0x01400504, /* Vertical timing */
+ .pol_freq = 0x00007028, /* Pol Freq */
+ .divisor = 0x00010006, /* 72Mhz Pixel Clock */
+ .lcd_size = 0x02ff03ff, /* 1024x768 */
+ .panel_type = 0x01, /* TFT */
+ .data_lines = 0x03, /* 24 Bit RGB */
+ .load_mode = 0x02, /* Frame Mode */
+ .panel_color = DVI_BEAGLE_ORANGE_COL /* ORANGE */
+};
+
#endif
diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
index c156cea..7bcbe9b 100644
--- a/include/configs/omap3_beagle.h
+++ b/include/configs/omap3_beagle.h
@@ -131,6 +131,7 @@
#define CONFIG_CMD_I2C /* I2C serial bus support */
#define CONFIG_CMD_MMC /* MMC support */
#define CONFIG_CMD_NAND /* NAND support */
+#define CONFIG_VIDEO_OMAP3 /* DSS Support */
#undef CONFIG_CMD_FLASH /* flinfo, erase, protect */
#undef CONFIG_CMD_FPGA /* FPGA configuration Support */
--
1.6.6.1
|
