path: root/recipes/linux/openzaurus-pxa-2.4.18-rmk7-pxa3-embedix20031107/usb-storage.patch

diff -Nur linux-2.4.18/drivers/usb/device/bi/sa1100.c linux-2.4.18-usb-storage/drivers/usb/device/bi/sa1100.c
--- linux-2.4.18/drivers/usb/device/bi/sa1100.c	2003-05-13 13:18:44.000000000 +0400
+++ linux-2.4.18-usb-storage/drivers/usb/device/bi/sa1100.c	2004-03-01 07:20:38.000000000 +0300
@@ -440,6 +440,7 @@
                                         udc_interrupts, *(UDCSR), *(UDCCS0), *(UDCAR));
 
 			usbd_device_event (udc_device, DEVICE_RESET, 0);
+			usbd_device_event (udc_device, DEVICE_ADDRESS_ASSIGNED,0);
 		}
 
 		if (status & UDCSR_SUSIR) {
diff -Nur linux-2.4.18/drivers/usb/device/Config.in linux-2.4.18-usb-storage/drivers/usb/device/Config.in
--- linux-2.4.18/drivers/usb/device/Config.in	2003-05-13 13:18:45.000000000 +0400
+++ linux-2.4.18-usb-storage/drivers/usb/device/Config.in	2003-11-07 05:35:14.000000000 +0300
@@ -34,6 +34,7 @@
    comment 'USB Device functions'
    source drivers/usb/device/net_fd/Config.in
    source drivers/usb/device/serial_fd/Config.in
+   source drivers/usb/device/storage_fd/Config.in
 	
    comment 'USB Device bus interfaces'
    source drivers/usb/device/bi/Config.in
diff -Nur linux-2.4.18/drivers/usb/device/Makefile linux-2.4.18-usb-storage/drivers/usb/device/Makefile
--- linux-2.4.18/drivers/usb/device/Makefile	2003-05-13 13:18:45.000000000 +0400
+++ linux-2.4.18-usb-storage/drivers/usb/device/Makefile	2003-11-07 05:35:01.000000000 +0300
@@ -20,6 +20,7 @@
 
 subdir-$(CONFIG_USBD_NET) += net_fd
 subdir-$(CONFIG_USBD_SERIAL) += serial_fd
+subdir-$(CONFIG_USBD_STORAGE) += storage_fd
 
 #subdir-$(CONFIG_USBD_GENERIC_BUS) += gen_bi
 #subdir-$(CONFIG_USBD_L7205_BUS) += l7205_bi
diff -Nur linux-2.4.18/drivers/usb/device/storage_fd/Config.help linux-2.4.18-usb-storage/drivers/usb/device/storage_fd/Config.help
--- linux-2.4.18/drivers/usb/device/storage_fd/Config.help	1970-01-01 03:00:00.000000000 +0300
+++ linux-2.4.18-usb-storage/drivers/usb/device/storage_fd/Config.help	2003-11-07 05:34:43.000000000 +0300
@@ -0,0 +1,55 @@
+CONFIG_USBD_STORAGE
+  Enable the generic mass storage function driver. This function is
+  used emulating a Linux block driver.
+
+CONFIG_USBD_STORAGE_VENDORID
+  Optionally specify the mass storage USB Device Vendor ID. The top
+  level Vendor ID will be used if this is not specified.
+
+CONFIG_USBD_STORAGE_PRODUCTID
+  Optionally specify the mass storage USB Device Product ID. The top
+  level Vendor ID will be used if this is not specified.
+
+CONFIG_USBD_STORAGE_OUT_ENDPOINT
+  Specify the preferred OUT (received data) endpoint number. This is a
+  number from 0-15 and must be allowed by the bus interface device.
+
+  Some devices such as the SA-1110 or L7205/L7210 may override this
+  value with a fixed value.
+
+CONFIG_USBD_STORAGE_IN_ENDPOINT
+  Specify the preferred IN (transmit data) endpoint number. This is a
+  number from 0-15 and must be allowed by the bus interface device.
+
+  Some devices such as the SA-1110 or L7205/L7210 may override this
+  value with a fixed value.
+
+CONFIG_USBD_STORAGE_INT_ENDPOINT
+  Specify the preferred INT (interrupt) endpoint number. This is a
+  number from 0-15 and must be allowed by the bus interface device.
+
+  Some devices such as the L7205/L7210 may override this value with a
+  fixed value. Others such as the SA-1110 do not allow an interrupt
+  value.
+
+CONFIG_USBD_STORAGE_OUT_PKTSIZE
+  Specify the maximum packet size for the OUT endpoint. This allowable
+  values are normally 16, 32 and 64. 
+
+  Some devices such as the Linkup L7205/L7210 may override this value
+  with a lower maximum value (such as 32).
+
+CONFIG_USBD_STORAGE_IN_PKTSIZE
+  Specify the maximum packet size for the IN endpoint. This allowable
+  values are normally 16, 32 and 64. 
+
+  Some devices such as the Linkup L7205/L7210 may override this value
+  with a lower maximum value (such as 32).
+
+CONFIG_USBD_STORAGE_INT_PKTSIZE
+  Specify the maximum packet size for the INT endpoint. This allowable
+  values are normally 8 and 16. Some bus interface devices may not
+  support all values.
+
+CONFIG_USBD_STORAGE_DEF_DEVICE_NAME
+  Specify the default block device name to used on mass storage.
diff -Nur linux-2.4.18/drivers/usb/device/storage_fd/Config.in linux-2.4.18-usb-storage/drivers/usb/device/storage_fd/Config.in
--- linux-2.4.18/drivers/usb/device/storage_fd/Config.in	1970-01-01 03:00:00.000000000 +0300
+++ linux-2.4.18-usb-storage/drivers/usb/device/storage_fd/Config.in	2003-11-07 05:34:43.000000000 +0300
@@ -0,0 +1,29 @@
+#
+#  Generic Mass Storage Function Driver
+#
+# Copyright (c) 2003 Communication Technology Inc.
+# Copyright (C) 2001 Lineo, Inc.
+# Copyright (C) 2001 Hewlett-Packard Co.
+mainmenu_option next_comment
+comment "Mass Storage Function"
+
+dep_tristate '  Mass Storage Function Driver' CONFIG_USBD_STORAGE $CONFIG_USBD
+if [ "$CONFIG_USBD_STORAGE" = "y" -o "$CONFIG_USBD_STORAGE" = "m" ]; then
+   hex     ' Overide VendorID (hex value)' CONFIG_USBD_STORAGE_VENDORID "0000"
+   hex     ' Overide ProductID (hex value)' CONFIG_USBD_STORAGE_PRODUCTID "0000"
+
+   # allow setting of endpoint configurations for some architectures
+   int     '    OUT Endpoint (0-15)' CONFIG_USBD_STORAGE_OUT_ENDPOINT "1"
+   int     '   OUT PacketSize (16, 32, 64)' CONFIG_USBD_STORAGE_OUT_PKTSIZE "64"
+   int     '    IN  Endpoint (0-15)' CONFIG_USBD_STORAGE_IN_ENDPOINT "2"
+   int     '   IN  PacketSize (16, 32, 64)' CONFIG_USBD_STORAGE_IN_PKTSIZE "64"
+
+   if [ ! "$CONFIG_ARCH_SA1100" = "y" -a ! "$CONFIG_ARCH_L7200" = "y" ]; then
+      int  '    INT Endpoint (0-15)' CONFIG_USBD_STORAGE_INT_ENDPOINT "3"
+      int  '   INT PacketSize (8, 16)' CONFIG_USBD_STORAGE_INT_PKTSIZE "16"
+   fi
+
+   string  '   Default Mass Storage device name' CONFIG_USBD_STORAGE_DEF_DEVICE_NAME ""
+fi
+
+endmenu
diff -Nur linux-2.4.18/drivers/usb/device/storage_fd/Makefile linux-2.4.18-usb-storage/drivers/usb/device/storage_fd/Makefile
--- linux-2.4.18/drivers/usb/device/storage_fd/Makefile	1970-01-01 03:00:00.000000000 +0300
+++ linux-2.4.18-usb-storage/drivers/usb/device/storage_fd/Makefile	2003-11-07 05:34:43.000000000 +0300
@@ -0,0 +1,58 @@
+#
+# SA1100 Function driver for a network USB Device
+#
+# Copyright (C) 2001 Lineo, Inc.
+# Copyright (C) 2001 Hewlett-Packard Co.
+
+
+O_TARGET	:= storage_fd_drv.o
+list-multi	:= storage_fd.o
+
+storage_fd-objs	:= storage-fd.o storageproto.o schedule_task.o # netproto.o crc32.o 
+
+# Object file lists.
+
+obj-y		:=
+obj-m		:=
+obj-n		:=
+obj-		:=
+
+# Each configuration option enables a list of files.
+
+obj-$(CONFIG_USBD_STORAGE)   += storage_fd.o
+
+# Extract lists of the multi-part drivers.
+# The 'int-*' lists are the intermediate files used to build the multi's.
+
+multi-y		:= $(filter $(list-multi), $(obj-y))
+multi-m		:= $(filter $(list-multi), $(obj-m))
+int-y		:= $(sort $(foreach m, $(multi-y), $($(basename $(m))-objs)))
+int-m		:= $(sort $(foreach m, $(multi-m), $($(basename $(m))-objs)))
+
+# Files that are both resident and modular: remove from modular.
+
+obj-m		:= $(filter-out $(obj-y), $(obj-m))
+int-m		:= $(filter-out $(int-y), $(int-m))
+
+# Translate to Rules.make lists.
+
+O_OBJS		:= $(filter-out $(export-objs), $(obj-y))
+OX_OBJS		:= $(filter     $(export-objs), $(obj-y))
+M_OBJS		:= $(sort $(filter-out $(export-objs), $(obj-m)))
+MX_OBJS		:= $(sort $(filter     $(export-objs), $(obj-m)))
+MI_OBJS		:= $(sort $(filter-out $(export-objs), $(int-m)))
+MIX_OBJS	:= $(sort $(filter     $(export-objs), $(int-m)))
+
+# The global Rules.make.
+
+include $(TOPDIR)/Rules.make
+
+# Link rules for multi-part drivers.
+
+storage_fd.o: $(storage_fd-objs)
+	$(LD) -r -o $@ $(storage_fd-objs)
+
+# dependencies:
+
+storage-fd.o: ../usbd.h ../usbd-bus.h ../usbd-func.h
+
diff -Nur linux-2.4.18/drivers/usb/device/storage_fd/schedule_task.c linux-2.4.18-usb-storage/drivers/usb/device/storage_fd/schedule_task.c
--- linux-2.4.18/drivers/usb/device/storage_fd/schedule_task.c	1970-01-01 03:00:00.000000000 +0300
+++ linux-2.4.18-usb-storage/drivers/usb/device/storage_fd/schedule_task.c	2003-11-07 05:34:43.000000000 +0300
@@ -0,0 +1,230 @@
+/*
+ * linux/drivers/usb/device/storage_fd/schedule_task.c - schedule task library
+ *
+ * Copyright (c) 2003 Lineo Solutions, Inc.
+ *
+ * Written by Shunnosuke kabata
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+/******************************************************************************
+** Include File
+******************************************************************************/
+#include <linux/config.h>
+#include <linux/fs.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/dcache.h>
+#include <linux/init.h>
+#include <linux/quotaops.h>
+#include <linux/slab.h>
+#include <linux/cache.h>
+#include <linux/swap.h>
+#include <linux/swapctl.h>
+#include <linux/prefetch.h>
+#include <linux/locks.h>
+#include <asm/uaccess.h>
+
+#include "schedule_task.h"
+
+/******************************************************************************
+** Macro Define
+******************************************************************************/
+#define TASK_DESC_NUM   (512)
+
+/******************************************************************************
+** Structure Define
+******************************************************************************/
+
+/**************************************
+** TASK_DESC
+**************************************/
+typedef struct _TASK_DESC{
+    struct _TASK_DESC*  next;
+    SCHEDULE_TASK_FUNC  task_entry;
+    int                 task_param1;
+    int                 task_param2;
+    int                 task_param3;
+    int                 task_param4;
+    int                 task_param5;
+    char*               file;
+    int                 line;
+} TASK_DESC;
+
+/**************************************
+** OS_WRP_TASK_DATA
+**************************************/
+typedef struct{
+    volatile TASK_DESC* read_desc;
+    volatile TASK_DESC* write_desc;
+    TASK_DESC           desc_pool[TASK_DESC_NUM];
+    spinlock_t          spin_lock;
+    struct tq_struct    task_que;
+    unsigned long       use_num;
+    unsigned long       max_num;
+} TASK_DATA;
+
+/******************************************************************************
+** Variable Declaration
+******************************************************************************/
+static TASK_DATA    TaskData;
+
+/******************************************************************************
+** Local Function Prototype
+******************************************************************************/
+static void task_entry(void*);
+
+/******************************************************************************
+** Global Function
+******************************************************************************/
+void schedule_task_init(void)
+{
+    int i;
+    
+    /* 0 clear */
+    memset(&TaskData, 0x00, sizeof(TaskData));
+    
+    /* Read/write pointer initialize */
+    TaskData.read_desc = TaskData.write_desc = &TaskData.desc_pool[0];
+    
+    /* Ling buffer initialize */
+    for(i=0; i<(TASK_DESC_NUM-1); i++){
+        TaskData.desc_pool[i].next = &TaskData.desc_pool[i+1];
+    }
+    TaskData.desc_pool[i].next = &TaskData.desc_pool[0];
+    
+    /* Spin lock initialize */
+    spin_lock_init(&TaskData.spin_lock);
+    
+    /* Task queue initialize */
+    PREPARE_TQUEUE(&TaskData.task_que, task_entry, &TaskData);
+    
+    return;
+}
+
+int schedule_task_register(SCHEDULE_TASK_FUNC entry, int param1, int param2,
+                           int param3, int param4, int param5)
+{
+    unsigned long   flags = 0;
+    
+    spin_lock_irqsave(&TaskData.spin_lock, flags);
+    
+    /* Free descriptor check */
+    if(TaskData.write_desc->next == TaskData.read_desc){
+        printk(KERN_INFO "storage_fd: schedule task no descriptor.\n");
+        spin_unlock_irqrestore(&TaskData.spin_lock, flags);
+        return -1;
+    }
+    
+    /* Descriptor set */
+    TaskData.write_desc->task_entry  = entry;
+    TaskData.write_desc->task_param1 = param1;
+    TaskData.write_desc->task_param2 = param2;
+    TaskData.write_desc->task_param3 = param3;
+    TaskData.write_desc->task_param4 = param4;
+    TaskData.write_desc->task_param5 = param5;
+    
+    /* Pointer update */
+    TaskData.write_desc = TaskData.write_desc->next;
+    
+    /* Statistics set */
+    TaskData.use_num++;
+    if(TaskData.use_num > TaskData.max_num){
+        TaskData.max_num = TaskData.use_num;
+    }
+    
+    spin_unlock_irqrestore(&TaskData.spin_lock, flags);
+    
+    /* Task queue register */
+    schedule_task(&TaskData.task_que);
+    
+    return 0;
+}
+
+void schedule_task_all_unregister(void)
+{
+    unsigned long   flags = 0;
+    
+    spin_lock_irqsave(&TaskData.spin_lock, flags);
+    TaskData.read_desc = TaskData.write_desc;
+    TaskData.use_num = 0;
+    spin_unlock_irqrestore(&TaskData.spin_lock, flags);
+}
+
+ssize_t schedule_task_proc_read(struct file* file, char* buf, size_t count,
+                                loff_t* pos)
+{
+    char    string[1024];
+    int     len = 0;
+
+    len += sprintf(string + len, "Schedule task max num:0x%d\n",
+            TASK_DESC_NUM);
+
+    len += sprintf(string + len, "Schedule task use num:0x%ld\n",
+            TaskData.use_num);
+
+    len += sprintf(string + len, "Schedule task max use num:0x%ld\n",
+            TaskData.max_num);
+    
+    *pos += len;
+    if(len > count){
+        len = -EINVAL;
+    }
+    else
+    if(len > 0 && copy_to_user(buf, string, len)) {
+        len = -EFAULT;
+    }
+
+    return len;
+}
+
+/******************************************************************************
+** Local Function
+******************************************************************************/
+static void task_entry(void* data)
+{
+    int                 cond;
+    unsigned long       flags = 0;
+    volatile TASK_DESC* desc;
+    
+    for(;;){
+        
+        spin_lock_irqsave(&TaskData.spin_lock, flags);
+        desc = TaskData.read_desc;
+        cond = (TaskData.read_desc == TaskData.write_desc);
+        spin_unlock_irqrestore(&TaskData.spin_lock, flags);
+        
+        if(cond) break;
+        
+        /* Task call */
+        desc->task_entry(desc->task_param1, desc->task_param2,
+                      desc->task_param3, desc->task_param4, desc->task_param5);
+        
+        spin_lock_irqsave(&TaskData.spin_lock, flags);
+        
+        /* Pointer update */
+        TaskData.read_desc = TaskData.read_desc->next;
+        
+        /* Statistics set */
+        TaskData.use_num--;
+        
+        spin_unlock_irqrestore(&TaskData.spin_lock, flags);
+    }
+    
+    return;
+}
+
diff -Nur linux-2.4.18/drivers/usb/device/storage_fd/schedule_task.h linux-2.4.18-usb-storage/drivers/usb/device/storage_fd/schedule_task.h
--- linux-2.4.18/drivers/usb/device/storage_fd/schedule_task.h	1970-01-01 03:00:00.000000000 +0300
+++ linux-2.4.18-usb-storage/drivers/usb/device/storage_fd/schedule_task.h	2003-11-07 05:34:43.000000000 +0300
@@ -0,0 +1,41 @@
+/*
+ * linux/drivers/usb/device/storage_fd/schedule_task.h - schedule task library header
+ *
+ * Copyright (c) 2003 Lineo Solutions, Inc.
+ *
+ * Written by Shunnosuke kabata
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#ifndef _SCHEDULE_TASK_H_
+#define _SCHEDULE_TASK_H_
+
+/******************************************************************************
+** Macro Define
+******************************************************************************/
+typedef int (*SCHEDULE_TASK_FUNC)(int, int, int, int, int);
+
+/******************************************************************************
+** Global Function Prototype
+******************************************************************************/
+void    schedule_task_init(void);
+int     schedule_task_register(SCHEDULE_TASK_FUNC, int, int, int, int, int);
+void    schedule_task_all_unregister(void);
+ssize_t schedule_task_proc_read(struct file*, char*, size_t, loff_t*);
+
+#endif  /* _SCHEDULE_TASK_H_ */
+
diff -Nur linux-2.4.18/drivers/usb/device/storage_fd/storage-fd.c linux-2.4.18-usb-storage/drivers/usb/device/storage_fd/storage-fd.c
--- linux-2.4.18/drivers/usb/device/storage_fd/storage-fd.c	1970-01-01 03:00:00.000000000 +0300
+++ linux-2.4.18-usb-storage/drivers/usb/device/storage_fd/storage-fd.c	2003-11-07 05:34:43.000000000 +0300
@@ -0,0 +1,865 @@
+/*
+ * linux/drivers/usb/device/storage_fd/storage-fd.c - mass storage function driver
+ *
+ * Copyright (c) 2003 Lineo Solutions, Inc.
+ *
+ * Written by Shunnosuke kabata
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Based on
+ *
+ * linux/drivers/usbd/net_fd/net-fd.c - network function driver
+ *
+ * Copyright (c) 2000, 2001, 2002 Lineo
+ * Copyright (c) 2001 Hewlett Packard
+ *
+ * By: 
+ *      Stuart Lynne <sl@lineo.com>, 
+ *      Tom Rushworth <tbr@lineo.com>, 
+ *      Bruce Balden <balden@lineo.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+/******************************************************************************
+** Include File
+******************************************************************************/
+#include <linux/config.h>
+#include <linux/module.h>
+
+#include "../usbd-export.h"
+#include "../usbd-build.h"
+#include "../usbd-module.h"
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/netdevice.h>
+#include <linux/skbuff.h>
+#include <linux/etherdevice.h>
+#include <linux/rtnetlink.h>
+#include <linux/smp_lock.h>
+#include <linux/ctype.h>
+#include <linux/timer.h>
+#include <linux/string.h>
+#include <linux/atmdev.h>
+#include <linux/pkt_sched.h>
+#include <linux/delay.h>
+#include <asm/uaccess.h>
+#include <asm/system.h>
+#include <net/arp.h>
+
+#include <linux/autoconf.h>
+
+#include "../usbd.h"
+#include "../usbd-func.h"
+#include "../usbd-bus.h"
+#include "../usbd-inline.h"
+#include "../usbd-arch.h"
+#include "../hotplug.h"
+
+#include "schedule_task.h"
+#include "storageproto.h"
+
+/******************************************************************************
+** Macro Define
+******************************************************************************/
+
+/**************************************
+** Module Information
+**************************************/
+
+MODULE_AUTHOR("Shunnosuke kabata");
+MODULE_DESCRIPTION("USB Device Mass Storage Function");
+USBD_MODULE_INFO("storage_fd 0.1");
+
+/**************************************
+** Configration Check
+**************************************/
+
+#if !defined (CONFIG_USBD_VENDORID) && !defined(CONFIG_USBD_STORAGE_VENDORID)
+#error No Vendor ID
+#endif
+#if !defined (CONFIG_USBD_PRODUCTID) && !defined(CONFIG_USBD_STORAGE_PRODUCTID)
+#error No Product ID
+#endif
+
+#if defined(CONFIG_USBD_STORAGE_VENDORID) && (CONFIG_USBD_STORAGE_VENDORID > 0)
+#undef CONFIG_USBD_VENDORID
+#define CONFIG_USBD_VENDORID    CONFIG_USBD_STORAGE_VENDORID
+#endif
+
+#if defined(CONFIG_USBD_STORAGE_PRODUCTID) && (CONFIG_USBD_STORAGE_PRODUCTID > 0)
+#undef CONFIG_USBD_PRODUCTID
+#define CONFIG_USBD_PRODUCTID   CONFIG_USBD_STORAGE_PRODUCTID
+#endif
+
+#ifndef CONFIG_USBD_MAXPOWER
+#define CONFIG_USBD_MAXPOWER            0
+#endif
+
+#ifndef CONFIG_USBD_MANUFACTURER
+#define CONFIG_USBD_MANUFACTURER        "Sharp"
+#endif
+
+#define MAXTRANSFER                     (512)
+
+#ifndef CONFIG_USBD_VENDORID
+#error "CONFIG_USBD_VENDORID not defined"
+#endif
+
+#ifndef CONFIG_USBD_PRODUCTID
+#error "CONFIG_USBD_PRODUCTID not defined"
+#endif
+
+#ifndef CONFIG_USBD_PRODUCT_NAME
+#define CONFIG_USBD_PRODUCT_NAME        "Linux Mass Storage Driver"
+#endif
+
+#ifndef CONFIG_USBD_SERIAL_NUMBER_STR
+#define CONFIG_USBD_SERIAL_NUMBER_STR   ""
+#endif
+
+/*
+ * USB 2.0 spec does not mention it, but MaxPower is expected to be at least one 
+ * and is tested for in USB configuration tests.
+ */
+
+#ifdef CONFIG_USBD_SELFPOWERED
+#define BMATTRIBUTE BMATTRIBUTE_RESERVED | BMATTRIBUTE_SELF_POWERED
+#define BMAXPOWER   1
+#else
+#define BMATTRIBUTE BMATTRIBUTE_RESERVED
+#define BMAXPOWER   CONFIG_USBD_MAXPOWER
+#endif
+
+/*
+ * setup some default values for pktsizes and endpoint addresses.
+ */
+
+#ifndef CONFIG_USBD_STORAGE_OUT_PKTSIZE
+#define CONFIG_USBD_STORAGE_OUT_PKTSIZE     64
+#endif
+
+#ifndef CONFIG_USBD_STORAGE_IN_PKTSIZE
+#define CONFIG_USBD_STORAGE_IN_PKTSIZE      64
+#endif
+
+#ifndef CONFIG_USBD_STORAGE_INT_PKTSIZE
+#define CONFIG_USBD_STORAGE_INT_PKTSIZE     16
+#endif
+
+#ifndef CONFIG_USBD_STORAGE_OUT_ENDPOINT
+#define CONFIG_USBD_STORAGE_OUT_ENDPOINT    1
+#endif
+
+#ifndef CONFIG_USBD_STORAGE_IN_ENDPOINT
+#define CONFIG_USBD_STORAGE_IN_ENDPOINT     2
+#endif
+
+#ifndef CONFIG_USBD_STORAGE_INT_ENDPOINT
+#define CONFIG_USBD_STORAGE_INT_ENDPOINT    3
+#endif
+
+/*
+ * check for architecture specific endpoint configurations
+ */
+
+#if defined(ABS_OUT_ADDR)
+    //#warning
+    //#warning USING ABS ENDPOINT OUT ADDRESS
+    #undef CONFIG_USBD_STORAGE_OUT_ENDPOINT
+
+    #if ABS_OUT_ADDR > 0
+        #define CONFIG_USBD_STORAGE_OUT_ENDPOINT    ABS_OUT_ADDR
+    #endif
+
+#elif defined(MAX_OUT_ADDR) && defined(CONFIG_USBD_STORAGE_OUT_ENDPOINT) && (CONFIG_USBD_STORAGE_OUT_ENDPOINT > MAX_OUT_ADDR)
+    //#warning
+    //#warning USING DEFAULT ENDPOINT OUT ADDRESS
+    #undef CONFIG_USBD_STORAGE_OUT_ENDPOINT
+    #define CONFIG_USBD_STORAGE_OUT_ENDPOINT        DFL_OUT_ADDR
+
+#endif  /* elif */
+
+#if defined(ABS_IN_ADDR)
+    //#warning
+    //#warning USING ABS ENDPOINT IN ADDRESS
+    #undef CONFIG_USBD_STORAGE_IN_ENDPOINT
+
+    #if ABS_IN_ADDR > 0
+        #define CONFIG_USBD_STORAGE_IN_ENDPOINT     ABS_IN_ADDR
+    #endif
+
+#elif defined(MAX_IN_ADDR) && defined(CONFIG_USBD_STORAGE_IN_ENDPOINT) && (CONFIG_USBD_STORAGE_IN_ENDPOINT > MAX_IN_ADDR)
+    //#warning
+    //#warning USING DEFAULT ENDPOINT IN ADDRESS
+    #undef CONFIG_USBD_STORAGE_IN_ENDPOINT
+    #define CONFIG_USBD_STORAGE_IN_ENDPOINT         DFL_IN_ADDR
+
+#endif  /* elif */
+
+#if defined(ABS_INT_ADDR)
+    //#warning
+    //#warning USING ABS ENDPOINT INT ADDRESS
+    #undef CONFIG_USBD_STORAGE_INT_ENDPOINT
+
+    #if ABS_INT_ADDR
+        #define CONFIG_USBD_STORAGE_INT_ENDPOINT    ABS_INT_ADDR
+    #endif
+
+#elif defined(MAX_INT_ADDR) && defined(CONFIG_USBD_STORAGE_INT_ENDPOINT) && (CONFIG_USBD_STORAGE_INT_ENDPOINT > MAX_INT_ADDR)
+    //#warning
+    //#warning USING DEFAULT ENDPOINT INT ADDRESS
+    #undef CONFIG_USBD_STORAGE_INT_ENDPOINT
+    #define CONFIG_USBD_STORAGE_INT_ENDPOINT        DFL_INT_ADDR
+
+#endif  /* elif */
+
+#if defined(MAX_OUT_PKTSIZE) && defined(CONFIG_USBD_STORAGE_OUT_PKTSIZE) && CONFIG_USBD_STORAGE_OUT_PKTSIZE > MAX_OUT_PKTSIZE
+    //#warning
+    //#warning OVERIDING ENDPOINT OUT PKTSIZE 
+    #undef CONFIG_USBD_STORAGE_OUT_PKTSIZE
+    #define CONFIG_USBD_STORAGE_OUT_PKTSIZE         MAX_OUT_PKTSIZE
+#endif
+
+#if defined(MAX_IN_PKTSIZE) && defined(CONFIG_USBD_STORAGE_IN_PKTSIZE) && CONFIG_USBD_STORAGE_IN_PKTSIZE > MAX_IN_PKTSIZE
+    //#warning
+    //#warning OVERIDING ENDPOINT IN PKTSIZE 
+    #undef CONFIG_USBD_STORAGE_IN_PKTSIZE
+    #define CONFIG_USBD_STORAGE_IN_PKTSIZE          MAX_IN_PKTSIZE
+#endif
+
+#if defined(MAX_INT_PKTSIZE) && defined(CONFIG_USBD_STORAGE_INT_PKTSIZE) && CONFIG_USBD_STORAGE_INT_PKTSIZE > MAX_INT_PKTSIZE
+    //#warning
+    //#warning OVERIDING ENDPOINT INT PKTSIZE
+    #undef CONFIG_USBD_STORAGE_INT_PKTSIZE
+    #define CONFIG_USBD_STORAGE_INT_PKTSIZE         MAX_INT_PKTSIZE
+#endif
+
+/******************************************************************************
+** Variable Declaration
+******************************************************************************/
+
+/**************************************
+** Module Parameters
+**************************************/
+
+static u32  vendor_id;
+static u32  product_id;
+static int  out_pkt_sz = CONFIG_USBD_STORAGE_OUT_PKTSIZE;
+static int  in_pkt_sz  = CONFIG_USBD_STORAGE_IN_PKTSIZE;
+
+MODULE_PARM(vendor_id, "i");
+MODULE_PARM(product_id, "i");
+MODULE_PARM(out_pkt_sz, "i");
+MODULE_PARM(in_pkt_sz, "i");
+
+MODULE_PARM_DESC(vendor_id, "vendor id");
+MODULE_PARM_DESC(product_id, "product id");
+
+/**************************************
+** Mass Storage Configuration
+**************************************/
+
+/*
+ * Data Interface Alternate 1 endpoints
+ */
+static __initdata struct usb_endpoint_description StorageAlt1Endpoints[] = {
+    {
+        bEndpointAddress:CONFIG_USBD_STORAGE_OUT_ENDPOINT,
+        bmAttributes:BULK,
+        wMaxPacketSize:CONFIG_USBD_STORAGE_OUT_PKTSIZE,
+        bInterval:0,
+        direction:OUT,
+        transferSize:MAXTRANSFER,
+    },
+
+    {
+        bEndpointAddress:CONFIG_USBD_STORAGE_IN_ENDPOINT,
+        bmAttributes:BULK,
+        wMaxPacketSize:CONFIG_USBD_STORAGE_IN_PKTSIZE,
+        bInterval:0,
+        direction:IN,
+        transferSize:MAXTRANSFER,
+    },
+
+#if defined(CONFIG_USBD_STORAGE_INT_ENDPOINT) && (CONFIG_USBD_STORAGE_INT_ENDPOINT > 0)
+    {
+        bEndpointAddress:CONFIG_USBD_STORAGE_INT_ENDPOINT,
+        bmAttributes:INTERRUPT,
+        wMaxPacketSize:CONFIG_USBD_STORAGE_INT_PKTSIZE,
+        bInterval:10,
+        direction:IN,
+        transferSize:CONFIG_USBD_STORAGE_INT_PKTSIZE,
+    },
+#endif
+};
+
+
+/*
+ * Data Interface Alternate description(s)
+ */
+static __initdata struct usb_alternate_description StorageAlternateDescriptions[] = {
+    {
+        #if defined(CONFIG_USBD_STORAGE_NO_STRINGS)
+        iInterface:"",
+        #else
+        iInterface:"Mass Storage Interface",
+        #endif
+        bAlternateSetting:0,
+        classes:0,
+        class_list:NULL,
+        endpoints:sizeof (StorageAlt1Endpoints) / sizeof (struct usb_endpoint_description),
+        endpoint_list:StorageAlt1Endpoints,
+    },
+};
+
+/*
+ * Interface description(s)
+ */
+static __initdata struct usb_interface_description StorageInterfaces[] = {
+    {
+        #if defined(CONFIG_USBD_STORAGE_NO_STRINGS)
+        iInterface:"",
+        #else
+        iInterface:"Mass Storage Interface",
+        #endif
+        bInterfaceClass:MASS_STORAGE_CLASS,
+        bInterfaceSubClass:MASS_STORAGE_SUBCLASS_SCSI,
+        bInterfaceProtocol:MASS_STORAGE_PROTO_BULK_ONLY,
+        alternates:sizeof (StorageAlternateDescriptions) / sizeof (struct usb_alternate_description),
+        alternate_list:StorageAlternateDescriptions,
+    },
+};
+
+/******************************************************************************
+** USB Configuration
+******************************************************************************/
+
+/*
+ * Configuration description(s)
+ */
+struct __initdata usb_configuration_description StorageDescription[] = {
+    {
+        #if defined(CONFIG_USBD_STORAGE_NO_STRINGS)
+        iConfiguration:"",
+        #else
+        iConfiguration:"Mass Storage Configuration",
+        #endif
+        bmAttributes:BMATTRIBUTE,
+        bMaxPower:BMAXPOWER,
+        interfaces:sizeof (StorageInterfaces) / sizeof (struct usb_interface_description),
+        interface_list:StorageInterfaces,
+    },
+};
+
+/*
+ * Device Description
+ */
+struct __initdata usb_device_description StorageDeviceDescription = {
+    bDeviceClass:0,
+    bDeviceSubClass:0,  // XXX
+    bDeviceProtocol:0,  // XXX
+    idVendor:CONFIG_USBD_VENDORID,
+    idProduct:CONFIG_USBD_PRODUCTID,
+    iManufacturer:CONFIG_USBD_MANUFACTURER,
+    iProduct:CONFIG_USBD_PRODUCT_NAME,
+    iSerialNumber:CONFIG_USBD_SERIAL_NUMBER_STR,
+};
+
+/**************************************
+** Other Variable
+**************************************/
+static int              storage_exit_flag = 0;
+static pid_t            storage_pid = 0;
+static struct semaphore storage_sem;
+struct timer_list       storage_usb_event_tim;
+
+
+/******************************************************************************
+** Global Function
+******************************************************************************/
+
+void storage_urb_send(struct usb_device_instance* device, void* buffer,
+                      int length)
+{
+    int         port = 0;
+    struct urb* urb;
+
+    if(!(urb = usbd_alloc_urb(device,
+                              device->function_instance_array + port,
+                              CONFIG_USBD_STORAGE_IN_ENDPOINT,
+                              length + 5 + in_pkt_sz))){
+        printk(KERN_INFO "storage_fd: usbd_alloc_urb failed. length '%d'.\n", length);
+        return;
+    }
+
+    if(buffer){
+        memcpy(urb->buffer, buffer, length);
+    }
+    else{
+        memset(urb->buffer, 0x00, length);
+    }
+    urb->actual_length = length;
+
+    if(usbd_send_urb(urb)){
+        printk(KERN_INFO "storage_fd: usbd_send_urb failed.\n");
+        usbd_dealloc_urb(urb);
+        return;
+    }
+
+    return;
+}
+
+/******************************************************************************
+** Local Function
+******************************************************************************/
+
+/**************************************
+** Called when a USB Device is created or destroyed
+**************************************/
+
+static int storage_thread(void *_c)
+{
+    siginfo_t           info;
+    unsigned long       signr;
+    char                buff[32];
+
+    /* current status set */
+    daemonize();
+
+    /* PID set */
+    storage_pid = current->pid;
+
+    /* thread name set */
+    sprintf(current->comm, STORAGE_THREAD_NAME);
+    (current)->nice = 10;
+
+    /* signal register */
+    spin_lock_irq(&current->sigmask_lock);
+    siginitsetinv(&current->blocked,
+                  sigmask(SIGUSR1) | sigmask(SIGHUP) | sigmask(SIGKILL) |
+                  sigmask(SIGSTOP) | sigmask(SIGCONT) | sigmask(SIGTERM) |
+                  sigmask(SIGALRM));
+    recalc_sigpending(current);
+    spin_unlock_irq(&current->sigmask_lock);
+
+    /* media open */
+    schedule_task_register(
+        (SCHEDULE_TASK_FUNC)storageproto_media_status_check, CONTEXT_STORAGE,
+        0, 0, 0, 0);
+
+    /* thread active indicate */
+    sprintf(buff, "%d\n", storage_pid);
+    hotplug("usbdstorage", buff, "active");
+
+    for(;;){
+        set_current_state(TASK_INTERRUPTIBLE);
+
+        if (!signal_pending(current)) {
+            schedule();
+            continue;
+        }
+
+        spin_lock_irq(&current->sigmask_lock);
+        signr = dequeue_signal(&current->blocked, &info);
+        spin_unlock_irq(&current->sigmask_lock);
+
+        switch(signr) {
+        case SIGHUP:
+            /* media signal indicate */
+            schedule_task_register(
+                (SCHEDULE_TASK_FUNC)storageproto_media_status_check, CONTEXT_STORAGE,
+                0, 0, 0, 0);
+
+            DBG_STORAGE_FD(KERN_INFO "storage_fd: signal receive 'SIGHUP'.\n");
+            break;
+
+        default:
+            DBG_STORAGE_FD(KERN_INFO "storage_fd: signal receive '%ld'\n", signr);
+            break;
+        }
+
+        if(storage_exit_flag) break;
+    }
+    /* current status set */
+    current->state = TASK_RUNNING;
+
+    /* PID clear */
+    storage_pid = 0;
+
+    /* thread inactive indicate */
+    hotplug("usbdstorage", buff, "inactive");
+
+    up(&storage_sem);
+
+    return 0;
+}
+
+static void storage_function_init(struct usb_bus_instance* bus,
+                              struct usb_device_instance* device,
+                              struct usb_function_driver* function_driver)
+{
+    /* schedule task init */
+    schedule_task_init();
+
+    /* storage protocol initialize */
+    storageproto_init();
+
+    /* semaphore init */
+    sema_init(&storage_sem, 0);
+
+    /* timer initialize */
+    init_timer(&storage_usb_event_tim);
+
+    /* thread create */
+    storage_pid = kernel_thread(storage_thread, NULL, 0);
+
+    return;
+}
+
+static void storage_function_exit(struct usb_device_instance* device)
+{
+    /* thread kill */
+    storage_exit_flag = 1;
+    kill_proc(storage_pid, SIGKILL, 1);
+    down(&storage_sem);
+
+    /* delete timer */
+    del_timer(&storage_usb_event_tim);
+
+    /* storage protocol exit */
+    storageproto_exit();
+
+    /* schedule task delete */
+    schedule_task_all_unregister();
+
+    return;
+}
+
+
+/**************************************
+** Called to handle USB Events
+**************************************/
+
+static void storage_usb_event_delay_timeout(unsigned long param)
+{
+    /* media signal indicate */
+    schedule_task_register(
+        (SCHEDULE_TASK_FUNC)storageproto_usb_status_check, (int)param,
+        0, 0, 0, 0);
+
+    return;
+}
+
+/*
+ * storage_event - process a device event
+ * @device: usb device 
+ * @event: the event that happened
+ *
+ * Called by the usb device core layer to respond to various USB events.
+ *
+ * This routine IS called at interrupt time. Please use the usual precautions.
+ *
+ */
+void storage_event(struct usb_device_instance* device,
+                   usb_device_event_t event, int data)
+{
+#if 0
+    static struct {
+        usb_device_event_t  event;
+        char*               string;
+    } eventAnal[] = {
+        {DEVICE_UNKNOWN,            "DEVICE_UNKNOWN"},
+        {DEVICE_INIT,               "DEVICE_INIT"},
+        {DEVICE_CREATE,             "DEVICE_CREATE"},
+        {DEVICE_HUB_CONFIGURED,     "DEVICE_HUB_CONFIGURED"},
+        {DEVICE_RESET,              "DEVICE_RESET"},
+        {DEVICE_ADDRESS_ASSIGNED,   "DEVICE_ADDRESS_ASSIGNED"},
+        {DEVICE_CONFIGURED,         "DEVICE_CONFIGURED"},
+        {DEVICE_SET_INTERFACE,      "DEVICE_SET_INTERFACE"},
+        {DEVICE_SET_FEATURE,        "DEVICE_SET_FEATURE"},
+        {DEVICE_CLEAR_FEATURE,      "DEVICE_CLEAR_FEATURE"},
+        {DEVICE_DE_CONFIGURED,      "DEVICE_DE_CONFIGURED"},
+        {DEVICE_BUS_INACTIVE,       "DEVICE_BUS_INACTIVE"},
+        {DEVICE_BUS_ACTIVITY,       "DEVICE_BUS_ACTIVITY"},
+        {DEVICE_POWER_INTERRUPTION, "DEVICE_POWER_INTERRUPTION"},
+        {DEVICE_HUB_RESET,          "DEVICE_HUB_RESET"},
+        {DEVICE_DESTROY,            "DEVICE_DESTROY"},
+        {DEVICE_FUNCTION_PRIVATE,   "DEVICE_FUNCTION_PRIVATE"}
+    };
+    int i;
+
+    for(i=0; i<(sizeof(eventAnal)/sizeof(eventAnal[0])); i++){
+        if(event == eventAnal[i].event){
+            DBG_STORAGE_FD(KERN_INFO "storage_fd: event receive '%s'.\n",
+                eventAnal[i].string);
+            break;
+        }
+    }
+    if(i == (sizeof(eventAnal)/sizeof(eventAnal[0]))){
+        DBG_STORAGE_FD(KERN_INFO "storage_fd: unknown event receive.\n");
+    }
+#endif
+
+    switch(event){
+    case DEVICE_ADDRESS_ASSIGNED:
+        {
+        static int  Is1stCheck = 1;
+        if(Is1stCheck){
+            Is1stCheck = 0;
+
+            /* delay timer set */
+            del_timer(&storage_usb_event_tim);
+            storage_usb_event_tim.expires  = jiffies + ((USB_EVENT_DELAY_TIM * HZ) / 1000);
+            storage_usb_event_tim.data     = USB_DISCONNECT;
+            storage_usb_event_tim.function = storage_usb_event_delay_timeout;
+            add_timer(&storage_usb_event_tim);
+            break;
+        }
+        }
+    case DEVICE_BUS_ACTIVITY:
+        /* delay timer set */
+        del_timer(&storage_usb_event_tim);
+        storage_usb_event_tim.expires  = jiffies + ((USB_EVENT_DELAY_TIM * HZ) / 1000);
+        storage_usb_event_tim.data     = USB_CONNECT;
+        storage_usb_event_tim.function = storage_usb_event_delay_timeout;
+        add_timer(&storage_usb_event_tim);
+        break;
+
+    case DEVICE_BUS_INACTIVE:
+        /* delay timer set */
+        del_timer(&storage_usb_event_tim);
+        storage_usb_event_tim.expires  = jiffies + ((USB_EVENT_DELAY_TIM * HZ) / 1000);
+        storage_usb_event_tim.data     = USB_DISCONNECT;
+        storage_usb_event_tim.function = storage_usb_event_delay_timeout;
+        add_timer(&storage_usb_event_tim);
+        break;
+
+    case DEVICE_RESET:
+        schedule_task_register(
+            (SCHEDULE_TASK_FUNC)storageproto_usb_reset_ind,
+            0, 0, 0, 0, 0);
+        break;
+
+    default:
+        break;
+    }
+
+    return;
+}
+
+/*
+ * storage_recv_setup - called with a control URB 
+ * @urb - pointer to struct urb
+ *
+ * Check if this is a setup packet, process the device request, put results
+ * back into the urb and return zero or non-zero to indicate success (DATA)
+ * or failure (STALL).
+ *
+ * This routine IS called at interrupt time. Please use the usual precautions.
+ *
+ */
+int storage_recv_setup(struct urb* urb)
+{
+    return 0;
+}
+
+/*
+ * storage_recv_urb - called with a received URB 
+ * @urb - pointer to struct urb
+ *
+ * Return non-zero if we failed and urb is still valid (not disposed)
+ *
+ * This routine IS called at interrupt time. Please use the usual precautions.
+ *
+ */
+int storage_recv_urb(struct urb* urb)
+{
+    int                             port = 0;   // XXX compound device
+    struct usb_device_instance*     device;
+    struct usb_function_instance*   function;
+
+    if(!urb || !(device = urb->device) ||
+       !(function = device->function_instance_array + port)){
+        return -EINVAL;
+    }
+
+    if(urb->status != RECV_OK){
+        return -EINVAL;
+    }
+
+    /* URB urb_analysis */
+    schedule_task_register(
+        (SCHEDULE_TASK_FUNC)storageproto_urb_analysis, (int)urb,
+        0, 0, 0, 0);
+
+    return 0;
+}
+
+/*
+ * storage_urb_sent - called to indicate URB transmit finished
+ * @urb: pointer to struct urb
+ * @rc: result
+ *
+ * The usb device core layer will use this to let us know when an URB has
+ * been finished with.
+ *
+ * This routine IS called at interrupt time. Please use the usual precautions.
+ *
+ */
+int storage_urb_sent(struct urb* urb, int rc)
+{
+    int                             port = 0;   // XXX compound device
+    struct usb_device_instance*     device;
+    struct usb_function_instance*   function;
+
+    if(!urb || !(device = urb->device) ||
+       !(function = device->function_instance_array + port)){
+        return -EINVAL;
+    }
+
+    usbd_dealloc_urb (urb);
+
+    return 0;
+}
+
+/**************************************
+** Proc file system
+**************************************/
+
+static ssize_t storage_proc_read(struct file* file, char* buf, size_t count,
+                                 loff_t* pos)
+{
+    int len = 0, ret;
+
+    if(*pos > 0) return 0;
+
+    if((ret = storageproto_proc_read(file, buf + len, count - len, pos)) < 0){
+        return ret;
+    }
+    len += ret;
+
+    if((ret = schedule_task_proc_read(file, buf + len, count - len, pos)) < 0){
+        return ret;
+    }
+    len += ret;
+
+    return len;
+}
+
+static struct file_operations StorageProcOps = {
+    read:storage_proc_read,
+};
+
+/**************************************
+** Module init and exit
+**************************************/
+
+struct usb_function_operations StorageFunctionOps = {
+    event:storage_event,
+    recv_urb:storage_recv_urb,
+    recv_setup:storage_recv_setup,
+    urb_sent:storage_urb_sent,
+    function_init:storage_function_init,
+    function_exit:storage_function_exit,
+};
+
+struct usb_function_driver StorageFunctionDriver = {
+    name:"Mass Storage",
+    ops:&StorageFunctionOps,
+    device_description:&StorageDeviceDescription,
+    configurations:sizeof (StorageDescription) / sizeof (struct usb_configuration_description),
+    configuration_description:StorageDescription,
+    this_module:THIS_MODULE,
+};
+
+/*
+ * net_modinit - module init
+ *
+ */
+static int __init net_modinit(void)
+{
+    struct proc_dir_entry*  proc_entry;
+
+    printk(KERN_INFO "storage_fd: %s (OUT=%d,IN=%d)\n",
+        __usbd_module_info, out_pkt_sz, in_pkt_sz);
+
+    printk(KERN_INFO "storage_fd: vendorID: %x productID: %x\n",
+        CONFIG_USBD_VENDORID, CONFIG_USBD_PRODUCTID);
+
+    // verify pkt sizes not too small
+    if (out_pkt_sz < 3 || in_pkt_sz < 3){
+        printk(KERN_INFO "storage_fd: Rx pkt size %d or Tx pkt size %d too small\n",
+            out_pkt_sz, in_pkt_sz);
+        return (-EINVAL);
+    }
+
+    if(vendor_id){
+        StorageDeviceDescription.idVendor = vendor_id;
+    }
+    if(product_id){
+        StorageDeviceDescription.idProduct = product_id;
+    }
+
+    // register us with the usb device support layer
+    if(usbd_register_function(&StorageFunctionDriver)){
+        printk(KERN_INFO "storage_fd: usbd_register_function failed.\n");
+        return -EINVAL;
+    }
+
+    // create proc entry
+    if ((proc_entry = create_proc_entry("usb-storage", 0, 0)) == NULL) {
+        usbd_deregister_function (&StorageFunctionDriver);
+        printk(KERN_INFO "storage_fd: create_proc_entry failed.\n");
+        return -ENOMEM;
+    }
+    proc_entry->proc_fops = &StorageProcOps;
+
+    return 0;
+}
+
+/*
+ * function_exit - module cleanup
+ *
+ */
+static void __exit net_modexit (void)
+{
+    // de-register us with the usb device support layer
+    usbd_deregister_function (&StorageFunctionDriver);
+
+    // remove proc entry
+    remove_proc_entry("usb-storage", NULL);
+
+    return;
+}
+
+module_init (net_modinit);
+module_exit (net_modexit);
diff -Nur linux-2.4.18/drivers/usb/device/storage_fd/storageproto.c linux-2.4.18-usb-storage/drivers/usb/device/storage_fd/storageproto.c
--- linux-2.4.18/drivers/usb/device/storage_fd/storageproto.c	1970-01-01 03:00:00.000000000 +0300
+++ linux-2.4.18-usb-storage/drivers/usb/device/storage_fd/storageproto.c	2003-11-07 05:34:43.000000000 +0300
@@ -0,0 +1,1505 @@
+/*
+ * linux/drivers/usb/device/storage_fd/storageproto.c - mass storage protocol library
+ *
+ * Copyright (c) 2003 Lineo Solutions, Inc.
+ *
+ * Written by Shunnosuke kabata
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+/******************************************************************************
+** Include File
+******************************************************************************/
+#include <linux/config.h>
+#include <linux/module.h>
+
+#include "../usbd-export.h"
+#include "../usbd-build.h"
+#include "../usbd-module.h"
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/netdevice.h>
+#include <linux/skbuff.h>
+#include <linux/etherdevice.h>
+#include <linux/rtnetlink.h>
+#include <linux/smp_lock.h>
+#include <linux/ctype.h>
+#include <linux/timer.h>
+#include <linux/string.h>
+#include <linux/atmdev.h>
+#include <linux/pkt_sched.h>
+#include <linux/delay.h>
+#include <linux/blkdev.h>
+#include <linux/file.h>
+#include <asm/uaccess.h>
+#include <asm/system.h>
+#include <net/arp.h>
+
+#include <linux/autoconf.h>
+
+#include "../usbd.h"
+#include "../usbd-func.h"
+#include "../usbd-bus.h"
+#include "../usbd-inline.h"
+#include "../usbd-arch.h"
+#include "../hotplug.h"
+
+#include "schedule_task.h"
+#include "storageproto.h"
+
+/******************************************************************************
+** macro define
+******************************************************************************/
+
+#define DEVICE_BLOCK_SIZE       512
+
+#define BLOCK_BUFFER_SIZE       (1024 * 64)
+
+#define DEF_NUMBER_OF_HEADS     0x10
+#define DEF_SECTORS_PER_TRACK   0x20
+
+/******************************************************************************
+** Structure Define
+******************************************************************************/
+
+typedef struct{
+    unsigned char   scsi_command;
+    unsigned char*  command_name;
+    void            (*scsi_func)(struct usb_device_instance*,
+                                 COMMAND_BLOCK_WRAPPER*);
+} SCSI_ANALYSIS_TBL;
+
+typedef struct{
+    unsigned char   scsi_command;
+    unsigned char*  command_name;
+    void            (*bulkout_func)(struct usb_device_instance*,
+                                    void*, int);
+} SCSI_BULKOUT_ANALYSIS_TBL;
+
+/******************************************************************************
+** Variable Declaration
+******************************************************************************/
+
+/**************************************
+** Module Parameters
+**************************************/
+
+static char*    storage_device = CONFIG_USBD_STORAGE_DEF_DEVICE_NAME;
+MODULE_PARM(storage_device, "s");
+
+/**************************************
+** Device Information
+**************************************/
+
+static struct file*     DeviceFile      = NULL;
+static int              DeviceSize      = 0;
+static int              DeviceBlockSize = DEVICE_BLOCK_SIZE;
+static int              DeviceWrProtect = WR_PROTECT_OFF;
+
+/**************************************
+** Status
+**************************************/
+
+static int  StorageStatus  = STORAGE_IDLE;
+static int  UsbStatus      = USB_DISCONNECT;
+static int  MediaStatus    = MEDIA_EJECT;
+static int  MediaChange    = MEDIA_CHANGE_OFF;
+
+/**************************************
+** Keep Information
+**************************************/
+
+static SCSI_REQUEST_SENSE_DATA  RequestSenseData;
+static COMMAND_BLOCK_WRAPPER    KeepCBW;
+static unsigned long            BulkOutLength = 0;
+static unsigned char            BlockBuffer[BLOCK_BUFFER_SIZE];
+
+/**************************************
+** Statistics
+**************************************/
+static unsigned long    StatMaxBulkInSize  = 0;
+static unsigned long    StatMaxBulkOutSize = 0;
+static unsigned long    StatDevWriteError  = 0;
+static unsigned long    StatDevReadError   = 0;
+static unsigned long    StatDevFlushError  = 0;
+static unsigned long    StatWriteTimout    = 0;
+static unsigned long    StatMaxWriteTime   = 0;
+
+/**************************************
+** Timer
+**************************************/
+static struct timer_list    BulkOutTim;
+static struct timer_list    MediaCheckTim;
+
+/******************************************************************************
+** Local Function
+******************************************************************************/
+
+static void storage_bulkout_timeout(unsigned long param)
+{
+    /* statistics update */
+    StatWriteTimout++;
+    printk(KERN_INFO "storage_fd: write bulk out timeout. length '%ld/%ld'.\n",
+        BulkOutLength, KeepCBW.dCBWDataTransferLength);
+
+    return;
+}
+
+static void media_check_timeout(unsigned long param)
+{
+    /* media check */
+    schedule_task_register(
+        (SCHEDULE_TASK_FUNC)storageproto_media_status_check, CONTEXT_TIMER,
+        0, 0, 0, 0);
+
+    return;
+}
+
+static void request_sense_data_set(unsigned char sense_key, unsigned char asc,
+                                   unsigned char ascq, unsigned long info)
+{
+    /*
+     * set REQUEST SENSE DATA
+     */
+
+    memset(&RequestSenseData, 0x00, sizeof(RequestSenseData));
+
+    RequestSenseData.ErrorCode                    = 0x70;
+    RequestSenseData.Valid                        = (info) ? 1 : 0;
+    RequestSenseData.SenseKey                     = sense_key;
+    memcpy(RequestSenseData.Information, &info, sizeof(info));
+    RequestSenseData.AdditionalSenseLength        = 0x0a;
+    RequestSenseData.AdditionalSenseCode          = asc;
+    RequestSenseData.AdditionalSenseCodeQualifier = ascq;
+
+    return;
+}
+
+static void scsi_inquiry_analysis(struct usb_device_instance* device,
+                                  COMMAND_BLOCK_WRAPPER* cbw)
+{
+    SCSI_INQUIRY_DATA       data;
+    COMMAND_STATUS_WRAPPER  csw;
+    unsigned long           data_len;
+
+    /*
+     * data transport
+     */
+
+    memset(&data, 0x00, sizeof(data));
+
+    data.PeripheralDeviceType = 0x00;
+    data.RMB                  = 1;
+    data.ResponseDataFormat   = 0x01;
+    data.AdditionalLength     = 0x1f;
+    strncpy(data.VendorInformation, CONFIG_USBD_MANUFACTURER,
+            sizeof(data.VendorInformation));
+    strncpy(data.ProductIdentification, CONFIG_USBD_PRODUCT_NAME,
+            sizeof(data.ProductIdentification));
+    strncpy(data.ProductRevisionLevel, PRODUCT_REVISION_LEVEL,
+            sizeof(data.ProductRevisionLevel));
+
+    data_len = sizeof(data);
+    if(cbw->dCBWDataTransferLength < data_len){
+        data_len = cbw->dCBWDataTransferLength;
+    }
+
+    storage_urb_send(device, &data, data_len);
+
+    /*
+     * status transport
+     */
+
+    memset(&csw, 0x00, sizeof(csw));
+
+    csw.dCSWSignature   = CSW_SIGNATURE;
+    csw.dCSWTag         = cbw->dCBWTag;
+    csw.dCSWDataResidue = cbw->dCBWDataTransferLength - data_len;
+    csw.bCSWStatus      = 0;
+
+    storage_urb_send(device, &csw, sizeof(csw));
+
+    return;
+}
+
+static void scsi_read_format_capacity_analysis(struct usb_device_instance* device,
+                                               COMMAND_BLOCK_WRAPPER* cbw)
+{
+    SCSI_READ_FORMAT_CAPACITY_DATA  data;
+    COMMAND_STATUS_WRAPPER          csw;
+    unsigned long                   block_num, data_len;
+    unsigned short                  block_len;
+
+    /*
+     * data transport
+     */
+
+    block_num = 0xffffffff;
+    block_len = (unsigned short)DeviceBlockSize;
+    block_num = htonl(block_num);
+    block_len = htons(block_len);
+
+    memset(&data, 0x00, sizeof(data));
+
+    data.CapacityListHeader.CapacityListLength =
+        sizeof(data.CurrentMaximumCapacityDescriptor);
+    memcpy(data.CurrentMaximumCapacityDescriptor.NumberofBlocks, &block_num,
+           sizeof(block_num));
+    data.CurrentMaximumCapacityDescriptor.DescriptorCode = 0x03;
+    memcpy(data.CurrentMaximumCapacityDescriptor.BlockLength + 1, &block_len,
+           sizeof(block_len));
+
+    data_len = sizeof(data);
+    if(cbw->dCBWDataTransferLength < data_len){
+        data_len = cbw->dCBWDataTransferLength;
+    }
+
+    storage_urb_send(device, &data, data_len);
+
+    /*
+     * status transport
+     */
+
+    memset(&csw, 0x00, sizeof(csw));
+
+    csw.dCSWSignature   = CSW_SIGNATURE;
+    csw.dCSWTag         = cbw->dCBWTag;
+    csw.dCSWDataResidue = cbw->dCBWDataTransferLength - data_len;
+    csw.bCSWStatus      = 0;
+
+    storage_urb_send(device, &csw, sizeof(csw));
+
+    return;
+}
+
+static void scsi_read_capacity_analysis(struct usb_device_instance* device,
+                                        COMMAND_BLOCK_WRAPPER* cbw)
+{
+    SCSI_READ_CAPACITY_DATA data;
+    COMMAND_STATUS_WRAPPER  csw;
+    unsigned char           data_len, status = 0;
+
+    if(DeviceFile == NULL){
+        /* 0 clear */
+        memset(&data, 0x00, sizeof(data));
+
+        /* data length set */
+        data_len = cbw->dCBWDataTransferLength;
+
+        /* status set */
+        status = 1;
+
+        /* error code save REQUEST SENSE */
+        request_sense_data_set(0x02, 0x3a, 0x00, 0x00);
+    }
+    else
+    if(MediaChange == MEDIA_CHANGE_ON){
+        /* 0 clear */
+        memset(&data, 0x00, sizeof(data));
+
+        /* data length set */
+        data_len = cbw->dCBWDataTransferLength;
+
+        /* status set */
+        status = 1;
+
+        /* error code save REQUEST SENSE */
+        request_sense_data_set(0x06, 0x28, 0x00, 0x00);
+
+        /* media change flag off */
+        MediaChange = MEDIA_CHANGE_OFF;
+    }
+    else{
+        unsigned long   last_lba, block_len;
+
+        /* 0 clear */
+        memset(&data, 0x00, sizeof(data));
+
+        /* data set */
+        last_lba  = (DeviceSize / DeviceBlockSize) - 1;
+        block_len = DeviceBlockSize;
+        last_lba  = htonl(last_lba);
+        block_len = htonl(block_len);
+
+        memcpy(data.LastLogicalBlockAddress, &last_lba, sizeof(last_lba));
+        memcpy(data.BlockLengthInBytes, &block_len, sizeof(block_len));
+
+        /* data length set */
+        data_len = sizeof(data);
+
+        /* status set */
+        status = 0;
+    }
+
+    /*
+     * data transport
+     */
+
+    if(cbw->dCBWDataTransferLength < data_len){
+        data_len = cbw->dCBWDataTransferLength;
+    }
+
+    storage_urb_send(device, &data, data_len);
+
+    /*
+     * status transport
+     */
+
+    memset(&csw, 0x00, sizeof(csw));
+
+    csw.dCSWSignature   = CSW_SIGNATURE;
+    csw.dCSWTag         = cbw->dCBWTag;
+    csw.dCSWDataResidue = cbw->dCBWDataTransferLength - data_len;
+    csw.bCSWStatus      = status;
+
+    storage_urb_send(device, &csw, sizeof(csw));
+
+    return;
+}
+
+static void scsi_request_sense_analysis(struct usb_device_instance* device,
+                                        COMMAND_BLOCK_WRAPPER* cbw)
+{
+    COMMAND_STATUS_WRAPPER  csw;
+    unsigned long           data_len;
+
+    /*
+     * data transport
+     */
+
+    data_len = sizeof(RequestSenseData);
+    if(cbw->dCBWDataTransferLength < data_len){
+        data_len = cbw->dCBWDataTransferLength;
+    }
+
+    storage_urb_send(device, &RequestSenseData, data_len);
+
+    /*
+     * status transport
+     */
+
+    memset(&csw, 0x00, sizeof(csw));
+
+    csw.dCSWSignature   = CSW_SIGNATURE;
+    csw.dCSWTag         = cbw->dCBWTag;
+    csw.dCSWDataResidue = cbw->dCBWDataTransferLength - data_len;
+    csw.bCSWStatus      = 0;
+
+    storage_urb_send(device, &csw, sizeof(csw));
+
+    return;
+}
+
+static void scsi_read_10_analysis(struct usb_device_instance* device,
+                                  COMMAND_BLOCK_WRAPPER* cbw)
+{
+    SCSI_READ_10_COMMAND*   command = (SCSI_READ_10_COMMAND*)cbw->CBWCB;
+    COMMAND_STATUS_WRAPPER  csw;
+    unsigned char           status = 0;
+    unsigned short          len;
+    unsigned long           lba, size, offset;
+
+    memcpy(&lba, command->LogicalBlockAddress, sizeof(lba));
+    memcpy(&len, command->TransferLength, sizeof(len));
+    lba    = ntohl(lba);
+    len    = ntohs(len);
+    offset = lba * DeviceBlockSize;
+    size   = cbw->dCBWDataTransferLength;
+
+    if(DeviceFile == NULL){
+        /* command fail */
+        status = 1;
+
+        /* error code save REQUEST SENSE */
+        request_sense_data_set(0x02, 0x3a, 0x00, 0x00);
+
+        /*
+         * data transport
+         */
+
+        storage_urb_send(device, NULL, size);
+    }
+    else
+    if(MediaChange == MEDIA_CHANGE_ON){
+        /* command fail */
+        status = 1;
+
+        /* error code save REQUEST SENSE */
+        request_sense_data_set(0x06, 0x28, 0x00, 0x00);
+
+        /* media change flag off */
+        MediaChange = MEDIA_CHANGE_OFF;
+
+        /*
+         * data transport
+         */
+
+        storage_urb_send(device, NULL, size);
+    }
+    else{
+        unsigned long   count, read_size;
+
+        /*
+         * data transport
+         */
+
+        /* device seek */
+        DeviceFile->f_op->llseek(DeviceFile, offset, 0);
+
+        /* device read */
+        for(count = size; count; count -= read_size){
+            read_size = (count > sizeof(BlockBuffer)) ?
+                            sizeof(BlockBuffer) : count;
+            if(DeviceFile &&
+               DeviceFile->f_op->read(DeviceFile, BlockBuffer, read_size,
+                                      &DeviceFile->f_pos) != read_size){
+
+                /* command fail */
+                status = 1;
+
+                /* error code save REQUEST SENSE */
+                request_sense_data_set(0x02, 0x3a, 0x00, 0x00);
+
+                /* statistics update */
+                StatDevReadError++;
+                printk(KERN_INFO "storage_fd: device read error. length '%ld'.\n", read_size);
+            }
+
+            storage_urb_send(device, BlockBuffer, read_size);
+        }
+    }
+
+    /*
+     * status transport
+     */
+
+    memset(&csw, 0x00, sizeof(csw));
+
+    csw.dCSWSignature   = CSW_SIGNATURE;
+    csw.dCSWTag         = cbw->dCBWTag;
+    csw.dCSWDataResidue = cbw->dCBWDataTransferLength - size;
+    csw.bCSWStatus      = status;
+
+    storage_urb_send(device, &csw, sizeof(csw));
+
+    return;
+}
+
+static void scsi_mode_sense_analysis(struct usb_device_instance* device,
+                                     COMMAND_BLOCK_WRAPPER* cbw)
+{
+    static READ_WRITE_ERROR_RECOVERY_PAGE           page_01 = {
+        PageCode:0x01,
+        PageLength:0x0A,
+        ReadRetryCount:0x03,
+        WriteRetryCount:0x80,
+    };
+    static FLEXIBLE_DISK_PAGE                       page_05 = {
+        PageCode:0x05,
+        PageLength:0x1E,
+        TransferRate:{0x00, 0xFA},
+        NumberofHeads:0xA0,
+        SectorsperTrack:0x00,
+        DataBytesperSector:{0x02, 0x00},
+        NumberofCylinders:{0x00, 0x00},
+        MotorOnDelay:0x05,
+        MotorOffDelay:0x1E,
+        MediumRotationRate:{0x01, 0x68},
+    };
+    static REMOVABLE_BLOCK_ACCESS_CAPABILITIES_PAGE page_1b = {
+        PageCode:0x1B,
+        PageLength:0x0A,
+        TLUN:0x01,
+    };
+    static TIMER_AND_PROTECT_PAGE                   page_1c = {
+        PageCode:0x1c,
+        PageLength:0x06,
+        InactivityTimeMultiplier:0x0A,
+    };
+
+
+    SCSI_MODE_SENSE_COMMAND*    command = (SCSI_MODE_SENSE_COMMAND*)cbw->CBWCB;
+    SCSI_MODE_SENSE_DATA        data;
+    COMMAND_STATUS_WRAPPER      csw;
+    unsigned char               data_len, status = 0;
+    unsigned short              cylinder, sector;
+    unsigned long               size;
+
+    /*
+     * data transport
+     */
+
+    memset(&data, 0x00, sizeof(data));
+
+    /* set write protect */
+    data.ModeParameterHeader.WP = DeviceWrProtect;
+
+    /* set Flexible Disk Page */
+    if(DeviceFile == NULL){
+        sector   = (unsigned short)DeviceBlockSize;
+        cylinder = 0;
+        sector   = htons(sector);
+        cylinder = htons(cylinder);
+
+        page_05.NumberofHeads      = 0;
+        page_05.SectorsperTrack    = 0;
+        memcpy(page_05.DataBytesperSector, &sector, sizeof(sector));
+        memcpy(page_05.NumberofCylinders, &cylinder, sizeof(cylinder));
+    }
+    else{
+        sector   = (unsigned short)DeviceBlockSize;
+        size     = DEF_NUMBER_OF_HEADS * DEF_SECTORS_PER_TRACK * sector;
+        cylinder = DeviceSize / size;
+        sector   = htons(sector);
+        cylinder = htons(cylinder);
+
+        page_05.NumberofHeads      = DEF_NUMBER_OF_HEADS;
+        page_05.SectorsperTrack    = DEF_SECTORS_PER_TRACK;
+        memcpy(page_05.DataBytesperSector, &sector, sizeof(sector));
+        memcpy(page_05.NumberofCylinders, &cylinder, sizeof(cylinder));
+    }
+
+    if(command->PC == 0 && command->PageCode == 0x01){
+        data_len = sizeof(MODE_PARAMETER_HEADER) + sizeof(page_01);
+        data.ModeParameterHeader.ModeDataLength = data_len - 1;
+        memcpy(&data.ModePages, &page_01, sizeof(page_01));
+    }
+    else
+    if(command->PC == 0 && command->PageCode == 0x05){
+        data_len = sizeof(MODE_PARAMETER_HEADER) + sizeof(page_05);
+        data.ModeParameterHeader.ModeDataLength = data_len - 1;
+        memcpy(&data.ModePages, &page_05, sizeof(page_05));
+    }
+    else
+    if(command->PC == 0 && command->PageCode == 0x1b){
+        data_len = sizeof(MODE_PARAMETER_HEADER) + sizeof(page_1b);
+        data.ModeParameterHeader.ModeDataLength = data_len - 1;
+        memcpy(&data.ModePages, &page_1b, sizeof(page_1b));
+    }
+    else
+    if(command->PC == 0 && command->PageCode == 0x1c){
+        data_len = sizeof(MODE_PARAMETER_HEADER) + sizeof(page_1c);
+        data.ModeParameterHeader.ModeDataLength = data_len - 1;
+        memcpy(&data.ModePages, &page_1c, sizeof(page_1c));
+    }
+    else
+    if(command->PC == 0 && command->PageCode == 0x3f){
+        data_len = sizeof(MODE_PARAMETER_HEADER) + sizeof(MODE_ALL_PAGES);
+        data.ModeParameterHeader.ModeDataLength = data_len - 1;
+        memcpy(&data.ModePages.ModeAllPages.ReadWriteErrorRecoveryPage,
+               &page_01, sizeof(page_01));
+        memcpy(&data.ModePages.ModeAllPages.FlexibleDiskPage,
+               &page_05, sizeof(page_05));
+        memcpy(&data.ModePages.ModeAllPages.RemovableBlockAccessCapabilitiesPage,
+               &page_1b, sizeof(page_1b));
+        memcpy(&data.ModePages.ModeAllPages.TimerAndProtectPage,
+               &page_1c, sizeof(page_1c));
+    }
+    else{
+        /* command fail */
+        status = 1;
+        data_len = cbw->dCBWDataTransferLength;
+
+        /* error code save REQUEST SENSE */
+        request_sense_data_set(0x05, 0x24, 0x00, 0x00);
+    }
+
+    if(cbw->dCBWDataTransferLength < data_len){
+        data_len = cbw->dCBWDataTransferLength;
+    }
+
+    storage_urb_send(device, &data, data_len);
+
+    /*
+     * status transport
+     */
+
+    memset(&csw, 0x00, sizeof(csw));
+
+    csw.dCSWSignature   = CSW_SIGNATURE;
+    csw.dCSWTag         = cbw->dCBWTag;
+    csw.dCSWDataResidue = cbw->dCBWDataTransferLength - data_len;
+    csw.bCSWStatus      = status;
+
+    storage_urb_send(device, &csw, sizeof(csw));
+
+    return;
+}
+
+static void scsi_test_unit_ready_analysis(struct usb_device_instance* device,
+                                          COMMAND_BLOCK_WRAPPER* cbw)
+{
+    COMMAND_STATUS_WRAPPER      csw;
+    unsigned char               status = 0;
+
+    if(DeviceFile == NULL){
+        /* command fail */
+        status = 1;
+
+        /* error code save REQUEST SENSE */
+        request_sense_data_set(0x02, 0x3a, 0x00, 0x00);
+    }
+    else
+    if(MediaChange == MEDIA_CHANGE_ON){
+        /* command fail */
+        status = 1;
+
+        /* error code save REQUEST SENSE */
+        request_sense_data_set(0x06, 0x28, 0x00, 0x00);
+
+        /* media change flag off */
+        MediaChange = MEDIA_CHANGE_OFF;
+    }
+
+    /*
+     * status transport
+     */
+
+    memset(&csw, 0x00, sizeof(csw));
+
+    csw.dCSWSignature   = CSW_SIGNATURE;
+    csw.dCSWTag         = cbw->dCBWTag;
+    csw.dCSWDataResidue = cbw->dCBWDataTransferLength;
+    csw.bCSWStatus      = status;
+
+    storage_urb_send(device, &csw, sizeof(csw));
+
+    return;
+}
+
+static void scsi_prevent_allow_medium_removal_analysis(struct usb_device_instance* device,
+                                                       COMMAND_BLOCK_WRAPPER* cbw)
+{
+    SCSI_PREVENT_ALLOW_MEDIUM_REMOVAL_COMMAND*  command = (SCSI_PREVENT_ALLOW_MEDIUM_REMOVAL_COMMAND*)cbw->CBWCB;
+    COMMAND_STATUS_WRAPPER                      csw;
+    unsigned char                               status = 0;
+
+    if(command->Prevent){
+        /* command fail */
+        status = 1;
+
+        /* error code save REQUEST SENSE */
+        request_sense_data_set(0x05, 0x24, 0x00, 0x00);
+    }
+
+    /*
+     * status transport
+     */
+
+    memset(&csw, 0x00, sizeof(csw));
+
+    csw.dCSWSignature   = CSW_SIGNATURE;
+    csw.dCSWTag         = cbw->dCBWTag;
+    csw.dCSWDataResidue = cbw->dCBWDataTransferLength;
+    csw.bCSWStatus      = status;
+
+    storage_urb_send(device, &csw, sizeof(csw));
+
+    return;
+}
+
+static void scsi_start_stop_analysis(struct usb_device_instance* device,
+                                     COMMAND_BLOCK_WRAPPER* cbw)
+{
+    SCSI_START_STOP_COMMAND*    command = (SCSI_START_STOP_COMMAND*)cbw->CBWCB;
+    COMMAND_STATUS_WRAPPER      csw;
+    unsigned char               status = 0;
+
+    if(DeviceFile == NULL){
+        /* command fail */
+        status = 1;
+
+        /* error code save REQUEST SENSE */
+        request_sense_data_set(0x02, 0x3a, 0x00, 0x00);
+    }
+    else
+    if(MediaChange == MEDIA_CHANGE_ON){
+        /* command fail */
+        status = 1;
+
+        /* error code save REQUEST SENSE */
+        request_sense_data_set(0x06, 0x28, 0x00, 0x00);
+
+        /* media change flag off */
+        MediaChange = MEDIA_CHANGE_OFF;
+    }
+    else
+    if(command->Start && command->LoEj){
+        /* command fail */
+        status = 1;
+
+        /* error code save REQUEST SENSE */
+        request_sense_data_set(0x05, 0x24, 0x00, 0x00);
+    }
+
+    /* device buffer flush */
+    if(DeviceFile && DeviceFile->f_op->ioctl(DeviceFile->f_dentry->d_inode,
+                                             DeviceFile, BLKFLSBUF, 0) != 0){
+        /* statistics update */
+        StatDevFlushError++;
+        printk(KERN_INFO "storage_fd: device flush error.\n");
+    }
+
+    /*
+     * status transport
+     */
+
+    memset(&csw, 0x00, sizeof(csw));
+
+    csw.dCSWSignature   = CSW_SIGNATURE;
+    csw.dCSWTag         = cbw->dCBWTag;
+    csw.dCSWDataResidue = cbw->dCBWDataTransferLength;
+    csw.bCSWStatus      = status;
+
+    storage_urb_send(device, &csw, sizeof(csw));
+
+    return;
+}
+
+static void scsi_write_10_analysis(struct usb_device_instance* device,
+                                   COMMAND_BLOCK_WRAPPER* cbw)
+{
+    /* status set */
+    BulkOutLength = 0;
+    StorageStatus = STORAGE_BULKOUT;
+
+    /* timer set */
+    del_timer(&BulkOutTim);
+    BulkOutTim.expires  = jiffies + ((WR_BULKOUT_CHK_TIM * HZ) / 1000);
+    BulkOutTim.data     = 0;
+    BulkOutTim.function = storage_bulkout_timeout;
+    add_timer(&BulkOutTim);
+
+    return;
+}
+
+static void scsi_verify_analysis(struct usb_device_instance* device,
+                                 COMMAND_BLOCK_WRAPPER* cbw)
+{
+    COMMAND_STATUS_WRAPPER      csw;
+    unsigned char               status = 0;
+
+    if(DeviceFile == NULL){
+        /* command fail */
+        status = 1;
+
+        /* error code save REQUEST SENSE */
+        request_sense_data_set(0x02, 0x3a, 0x00, 0x00);
+    }
+    else
+    if(MediaChange == MEDIA_CHANGE_ON){
+        /* command fail */
+        status = 1;
+
+        /* error code save REQUEST SENSE */
+        request_sense_data_set(0x06, 0x28, 0x00, 0x00);
+
+        /* media change flag off */
+        MediaChange = MEDIA_CHANGE_OFF;
+    }
+
+    /*
+     * status transport
+     */
+
+    memset(&csw, 0x00, sizeof(csw));
+
+    csw.dCSWSignature   = CSW_SIGNATURE;
+    csw.dCSWTag         = cbw->dCBWTag;
+    csw.dCSWDataResidue = cbw->dCBWDataTransferLength;
+    csw.bCSWStatus      = status;
+
+    storage_urb_send(device, &csw, sizeof(csw));
+
+    return;
+}
+
+static void scsi_unsupport_analysis(struct usb_device_instance* device,
+                                    COMMAND_BLOCK_WRAPPER* cbw)
+{
+    COMMAND_STATUS_WRAPPER csw;
+    unsigned char          data_len = 0;
+
+    if(((cbw->bmCBWFlags & 0x80) == 0x00) && (cbw->dCBWDataTransferLength)){
+        /* BLKOUT */
+
+        /* status set */
+        BulkOutLength = 0;
+        StorageStatus = STORAGE_BULKOUT;
+    }
+    else{
+        /* BLKIN */
+
+        if(cbw->dCBWDataTransferLength){
+            data_len = cbw->dCBWDataTransferLength;
+            storage_urb_send(device, NULL, data_len);
+        }
+
+        /*
+         * status transport
+         */
+
+        memset(&csw, 0x00, sizeof(csw));
+
+        csw.dCSWSignature   = CSW_SIGNATURE;
+        csw.dCSWTag         = cbw->dCBWTag;
+        csw.dCSWDataResidue = cbw->dCBWDataTransferLength - data_len;
+        csw.bCSWStatus      = 0x01;
+        storage_urb_send(device, &csw, sizeof(csw));
+
+    }
+
+    /* error code save REQUEST SENSE */
+    request_sense_data_set(0x05, 0x20, 0x00, 0x00);
+
+    return;
+}
+
+static void scsi_bulkout_write_10_analysis(struct usb_device_instance* device,
+                                           void* buffer, int length)
+{
+    COMMAND_STATUS_WRAPPER  csw;
+    unsigned char           status = 0;
+    unsigned long           buff_used_len, buff_offset;
+    unsigned long           s_tick, e_tick, wr_tick;
+
+    buff_offset = BulkOutLength % sizeof(BlockBuffer);
+
+    memcpy(BlockBuffer + buff_offset, buffer, length);
+    BulkOutLength += length;
+
+    buff_used_len = BulkOutLength % sizeof(BlockBuffer);
+    if(buff_used_len == 0) buff_used_len = sizeof(BlockBuffer);
+
+    /* delete timer */
+    if(BulkOutLength >= KeepCBW.dCBWDataTransferLength){
+        del_timer(&BulkOutTim);
+    }
+
+    if(buff_used_len >= sizeof(BlockBuffer) ||
+       BulkOutLength >= KeepCBW.dCBWDataTransferLength){
+
+        /* buffer full */
+        SCSI_WRITE_10_COMMAND*  command = (SCSI_WRITE_10_COMMAND*)&KeepCBW.CBWCB;
+        unsigned short          len;
+        unsigned long           lba, offset;
+
+        memcpy(&lba, command->LogicalBlockAddress, sizeof(lba));
+        memcpy(&len, command->TransferLength, sizeof(len));
+        lba = ntohl(lba);
+        len = ntohs(len);
+
+        offset = (lba * DeviceBlockSize) +
+                 (sizeof(BlockBuffer) * ((BulkOutLength - 1) / sizeof(BlockBuffer)));
+
+        /* device check */
+        if(DeviceFile &&
+           MediaChange != MEDIA_CHANGE_ON &&
+           DeviceWrProtect != WR_PROTECT_ON){
+
+            /* write before jiffies get */
+            s_tick = jiffies;
+
+            /* device seek */
+            DeviceFile->f_op->llseek(DeviceFile, offset, 0);
+
+            /* device write */
+            if(DeviceFile->f_op->write(DeviceFile, BlockBuffer, buff_used_len,
+                                       &DeviceFile->f_pos) != buff_used_len){
+                /* statistics update */
+                StatDevWriteError++;
+                printk(KERN_INFO "storage_fd: device write error. length '%ld'.\n", buff_used_len);
+            }
+
+            /* write after jiffies get */
+            e_tick = jiffies;
+
+            /* statistics update */
+            wr_tick = e_tick - s_tick;
+            if(wr_tick > StatMaxWriteTime){
+                StatMaxWriteTime = wr_tick;
+            }
+        }
+    }
+
+    if(BulkOutLength >= KeepCBW.dCBWDataTransferLength){
+        if(DeviceFile == NULL){
+            /* command fail */
+            status = 1;
+
+            /* error code save REQUEST SENSE */
+            request_sense_data_set(0x02, 0x3a, 0x00, 0x00);
+        }
+        else
+        if(MediaChange == MEDIA_CHANGE_ON){
+            /* command fail */
+            status = 1;
+
+            /* error code save REQUEST SENSE */
+            request_sense_data_set(0x06, 0x28, 0x00, 0x00);
+
+            /* media change flag off */
+            MediaChange = MEDIA_CHANGE_OFF;
+        }
+        else
+        if(DeviceWrProtect == WR_PROTECT_ON){
+            /* command fail */
+            status = 1;
+
+            /* error code save REQUEST SENSE */
+            request_sense_data_set(0x07, 0x27, 0x00, 0x00);
+
+            /* media change flag off */
+            MediaChange = MEDIA_CHANGE_OFF;
+        }
+
+        /*
+         * status transport
+         */
+
+        memset(&csw, 0x00, sizeof(csw));
+
+        csw.dCSWSignature   = CSW_SIGNATURE;
+        csw.dCSWTag         = KeepCBW.dCBWTag;
+        csw.dCSWDataResidue = KeepCBW.dCBWDataTransferLength - BulkOutLength;
+        csw.bCSWStatus      = status;
+
+        storage_urb_send(device, &csw, sizeof(csw));
+
+        /* status reset */
+        BulkOutLength = 0;
+        StorageStatus = STORAGE_IDLE;
+
+        /* flush before jiffies get */
+        s_tick = jiffies;
+
+        /* device buffer flush */
+        if(DeviceFile && DeviceFile->f_op->ioctl(DeviceFile->f_dentry->d_inode,
+                                                 DeviceFile, BLKFLSBUF, 0) != 0){
+            /* statistics update */
+            StatDevFlushError++;
+            printk(KERN_INFO "storage_fd: device flush error.\n");
+        }
+
+        /* flush after jiffies get */
+        e_tick = jiffies;
+
+        /* statistics update */
+        wr_tick = e_tick - s_tick;
+        if(wr_tick > StatMaxWriteTime){
+            StatMaxWriteTime = wr_tick;
+        }
+
+    }
+
+    return;
+}
+
+static void scsi_bulkout_unsupport_analysis(struct usb_device_instance* device,
+                                            void* buffer, int length)
+{
+    COMMAND_STATUS_WRAPPER  csw;
+
+    BulkOutLength += length;
+
+    if(BulkOutLength >= KeepCBW.dCBWDataTransferLength){
+        /*
+         * status transport
+         */
+
+        memset(&csw, 0x00, sizeof(csw));
+
+        csw.dCSWSignature   = CSW_SIGNATURE;
+        csw.dCSWTag         = KeepCBW.dCBWTag;
+        csw.dCSWDataResidue = KeepCBW.dCBWDataTransferLength - BulkOutLength;
+        csw.bCSWStatus      = 1;
+
+        storage_urb_send(device, &csw, sizeof(csw));
+
+        /* error code save REQUEST SENSE */
+        request_sense_data_set(0x05, 0x20, 0x00, 0x00);
+
+        /* status reset */
+        BulkOutLength = 0;
+        StorageStatus = STORAGE_IDLE;
+    }
+
+    return;
+}
+
+/******************************************************************************
+** Global Function
+******************************************************************************/
+
+static SCSI_ANALYSIS_TBL    ScsiAnalysisTbl[] = {
+    {SCSI_FORMAT_UNT,                   "SCSI_FORMAT_UNT",                   NULL},
+    {SCSI_INQUIRY,                      "SCSI_INQUIRY",                      scsi_inquiry_analysis},
+    {SCSI_START_STOP,                   "SCSI_START_STOP",                   scsi_start_stop_analysis},
+    {SCSI_MODE_SELECT,                  "SCSI_MODE_SELECT",                  NULL},
+    {SCSI_MODE_SENSE,                   "SCSI_MODE_SENSE",                   scsi_mode_sense_analysis},
+    {SCSI_PREVENT_ALLOW_MEDIUM_REMOVAL, "SCSI_PREVENT_ALLOW_MEDIUM_REMOVAL", scsi_prevent_allow_medium_removal_analysis},
+    {SCSI_READ_10,                      "SCSI_READ_10",                      scsi_read_10_analysis},
+    {SCSI_READ_12,                      "SCSI_READ_12",                      NULL},
+    {SCSI_READ_CAPACITY,                "SCSI_READ_CAPACITY",                scsi_read_capacity_analysis},
+    {SCSI_READ_FORMAT_CAPACITY,         "SCSI_READ_FORMAT_CAPACITY",         scsi_read_format_capacity_analysis},
+    {SCSI_REQUEST_SENSE,                "SCSI_REQUEST_SENSE",                scsi_request_sense_analysis},
+    {SCSI_REZERO_UNIT,                  "SCSI_REZERO_UNIT",                  NULL},
+    {SCSI_SEEK_10,                      "SCSI_SEEK_10",                      NULL},
+    {SCSI_SEND_DIAGNOSTIC,              "SCSI_SEND_DIAGNOSTIC",              NULL},
+    {SCSI_TEST_UNIT_READY,              "SCSI_TEST_UNIT_READY",              scsi_test_unit_ready_analysis},
+    {SCSI_VERIFY,                       "SCSI_VERIFY",                       scsi_verify_analysis},
+    {SCSI_WRITE_10,                     "SCSI_WRITE_10",                     scsi_write_10_analysis},
+    {SCSI_WRITE_12,                     "SCSI_WRITE_12",                     NULL},
+    {SCSI_WRITE_AND_VERIFY,             "SCSI_WRITE_AND_VERIFY",             NULL}
+};
+
+static SCSI_BULKOUT_ANALYSIS_TBL    ScsiBlkOutAnalysisTbl[] = {
+    {SCSI_WRITE_10,                     "SCSI_WRITE_10",                     scsi_bulkout_write_10_analysis},
+};
+
+void storageproto_urb_analysis(struct urb* urb)
+{
+    COMMAND_BLOCK_WRAPPER*  cbw = (COMMAND_BLOCK_WRAPPER*)urb->buffer;
+    int                     i;
+
+    /* status BLKOUT check */
+    if(StorageStatus == STORAGE_BULKOUT){
+        for(i = 0;
+            i < sizeof(ScsiBlkOutAnalysisTbl) / sizeof(SCSI_ANALYSIS_TBL);
+            i++){
+            if(ScsiBlkOutAnalysisTbl[i].scsi_command == KeepCBW.CBWCB[0]){
+                if(ScsiBlkOutAnalysisTbl[i].bulkout_func){
+                    ScsiBlkOutAnalysisTbl[i].bulkout_func(urb->device,
+                                                          urb->buffer,
+                                                          urb->actual_length);
+                    goto RETURN_LABEL;
+                }
+                break;
+            }
+        }
+        scsi_bulkout_unsupport_analysis(urb->device, urb->buffer, urb->actual_length);
+        goto RETURN_LABEL;
+    }
+
+    /* signature check */
+    if(cbw->dCBWSignature != CBW_SIGNATURE){
+        printk(KERN_INFO "storage_fd: signature error. '0x%08lx'.\n",
+            cbw->dCBWSignature);
+        goto RETURN_LABEL;
+    }
+
+    /* statistics set */
+    if(cbw->dCBWDataTransferLength){
+        if(((cbw->bmCBWFlags & 0x80) == 0x00) && (cbw->dCBWDataTransferLength)){
+            /* BULK OUT */
+            if(StatMaxBulkOutSize < cbw->dCBWDataTransferLength){
+                StatMaxBulkOutSize = cbw->dCBWDataTransferLength;
+            }
+        }
+        else{
+            /* BULK IN */
+            if(StatMaxBulkInSize < cbw->dCBWDataTransferLength){
+                StatMaxBulkInSize = cbw->dCBWDataTransferLength;
+            }
+        }
+    }
+
+    /* save CBW and set storage status */
+    memcpy(&KeepCBW, cbw, sizeof(KeepCBW));
+
+    /* UFI command analysis */
+    for(i = 0; i < sizeof(ScsiAnalysisTbl) / sizeof(SCSI_ANALYSIS_TBL); i++){
+        if(ScsiAnalysisTbl[i].scsi_command == cbw->CBWCB[0]){
+            if(ScsiAnalysisTbl[i].scsi_func){
+                ScsiAnalysisTbl[i].scsi_func(urb->device, cbw);
+                goto RETURN_LABEL;
+            }
+            break;
+        }
+    }
+
+    scsi_unsupport_analysis(urb->device, cbw);
+    printk(KERN_INFO "storage_fd: SCSI command error. '0x%02x'.\n",
+        cbw->CBWCB[0]);
+    goto RETURN_LABEL;
+
+RETURN_LABEL:
+
+    /* URB free */
+    usbd_recycle_urb(urb);
+
+    return;
+}
+
+int storageproto_device_open_check(void)
+{
+    struct file*    file;
+    struct inode*   inode;
+    kdev_t          dev;
+    int             read_org;
+
+    /* device already open check */
+    if(DeviceFile){
+        storageproto_device_close();
+    }
+
+    /* device open */
+    file = filp_open(storage_device, O_RDWR, 0000);
+    if(IS_ERR(file)){
+        file = filp_open(storage_device, O_RDONLY, 0000);
+        if(IS_ERR(file)){
+            storageproto_device_close();
+            return MEDIA_EJECT;
+        }
+        DeviceWrProtect = WR_PROTECT_ON;
+    }
+
+    file->f_op->llseek(file, 0, 0);
+    if(file->f_op->read(file, (void*)&read_org, sizeof(read_org), &file->f_pos)
+                        != sizeof(read_org)){
+        filp_close(file, NULL);
+        storageproto_device_close();
+        return MEDIA_EJECT;
+    }
+
+    /* struct file pointer save */
+    DeviceFile = file;
+
+    /* device information */
+    inode = file->f_dentry->d_inode;
+    dev = inode->i_rdev;
+
+    if (blk_size[MAJOR(dev)]){
+        DeviceSize = blk_size[MAJOR(dev)][MINOR(dev)] << BLOCK_SIZE_BITS;
+    }
+    else{
+        DeviceSize = INT_MAX << BLOCK_SIZE_BITS;
+    }
+
+    if(blksize_size[MAJOR(dev)] && blksize_size[MAJOR(dev)][MINOR(dev)]){
+        DeviceBlockSize = DEVICE_BLOCK_SIZE;
+    }
+    else{
+        DeviceBlockSize = DEVICE_BLOCK_SIZE;
+    }
+
+    return MEDIA_INSERT;
+}
+
+void storageproto_device_close(void)
+{
+    if(DeviceFile){
+        filp_close(DeviceFile, NULL);
+        DeviceFile      = NULL;
+        DeviceSize      = 0;
+        DeviceBlockSize = DEVICE_BLOCK_SIZE;
+        DeviceWrProtect = WR_PROTECT_OFF;
+    }
+
+    return;
+}
+
+void storageproto_usb_status_check(int status)
+{
+    static int  Is1stCheck = 1;
+
+    /* USB status check */
+    if(Is1stCheck){
+        Is1stCheck = 0;
+    }
+    else{
+        if(UsbStatus == status) goto RETURN_LABEL;
+    }
+
+    /* set status */
+    UsbStatus = status;
+
+    switch(UsbStatus){
+    case USB_CONNECT:
+        /* media status check */
+        storageproto_media_status_check(CONTEXT_SCHEDULE);
+
+        switch(MediaStatus){
+        case MEDIA_EJECT:
+            break;
+
+        case MEDIA_INSERT:
+            hotplug("usbdstorage", storage_device, "umount");
+            break;
+
+        default:
+            break;
+        }
+        hotplug("usbdstorage", storage_device, "connect");
+        break;
+
+    case USB_DISCONNECT:
+        /* device close */
+        storageproto_device_close();
+
+        switch(MediaStatus){
+        case MEDIA_EJECT:
+            break;
+
+        case MEDIA_INSERT:
+            hotplug("usbdstorage", storage_device, "mount");
+            break;
+
+        default:
+            break;
+        }
+        hotplug("usbdstorage", storage_device, "disconnect");
+        break;
+
+    default:
+        break;
+    }
+
+RETURN_LABEL:
+    DBG_STORAGE_FD(KERN_INFO "storage_fd: USB check '%s' '%s' 'file:%p'.\n",
+        (UsbStatus) ? "USB_CONNECT" : "USB_DISCONNECT",
+        (MediaStatus) ? "MEDIA_INSERT" : "MEDIA_EJECT", DeviceFile);
+
+    return;
+}
+
+void storageproto_media_status_check(int call_context)
+{
+    static unsigned long    RetryCount = 0;
+    int status;
+
+    /* media open check */
+    status = storageproto_device_open_check();
+
+    /* media status check retry */
+    if(status == MEDIA_EJECT){
+        switch(call_context){
+        case CONTEXT_STORAGE:
+
+            /* retry counter init */
+            RetryCount = 0;
+
+            /* timer set */
+            del_timer(&MediaCheckTim);
+            MediaCheckTim.expires  = jiffies + ((MEDIA_CHECK_TIM * HZ) / 1000);
+            MediaCheckTim.data     = 0;
+            MediaCheckTim.function = media_check_timeout;
+            add_timer(&MediaCheckTim);
+
+            break;
+
+        case CONTEXT_TIMER:
+
+            /* retry counter update */
+            RetryCount++;
+
+            /* retry counter check */
+            if(RetryCount >= MEDIA_CHECK_RETRY) break;
+
+            /* timer set */
+            del_timer(&MediaCheckTim);
+            MediaCheckTim.expires  = jiffies + ((MEDIA_CHECK_TIM * HZ) / 1000);
+            MediaCheckTim.data     = 0;
+            MediaCheckTim.function = media_check_timeout;
+            add_timer(&MediaCheckTim);
+
+            break;
+
+        default:
+            break;
+        }
+    }
+    else
+    if(status == MEDIA_INSERT){
+        /* delete timer */
+        del_timer(&MediaCheckTim);
+    }
+
+    /* media status check */
+    if(status == MediaStatus){
+        if(UsbStatus == USB_DISCONNECT){
+            storageproto_device_close();
+        }
+        if(MediaStatus == MEDIA_INSERT){
+            if(call_context == CONTEXT_STORAGE || call_context == CONTEXT_TIMER){
+                MediaChange = MEDIA_CHANGE_ON;
+            }
+        }
+        goto RETURN_LABEL;
+    }
+
+    /* set status */
+    MediaStatus = status;
+
+    switch(MediaStatus){
+    case MEDIA_INSERT:
+        /* set status */
+        MediaChange = MEDIA_CHANGE_ON;
+
+        switch(UsbStatus){
+        case USB_DISCONNECT:
+            storageproto_device_close();
+            break;
+
+        case USB_CONNECT:
+            break;
+
+        default:
+            break;
+        }
+        hotplug("usbdstorage", storage_device, "insert");
+        break;
+
+    case MEDIA_EJECT:
+        switch(UsbStatus){
+        case USB_DISCONNECT:
+            storageproto_device_close();
+            break;
+
+        case USB_CONNECT:
+            break;
+
+        default:
+            break;
+        }
+        hotplug("usbdstorage", storage_device, "eject");
+        break;
+
+    default:
+        break;
+    }
+
+RETURN_LABEL:
+    DBG_STORAGE_FD(KERN_INFO "storage_fd: media check. '%s' '%s' 'file:%p' '%s'.\n",
+        (UsbStatus) ? "USB_CONNECT" : "USB_DISCONNECT",
+        (MediaStatus) ? "MEDIA_INSERT" : "MEDIA_EJECT", DeviceFile,
+        (call_context == CONTEXT_SCHEDULE) ? "CONTEXT_SCHEDULE" : 
+        (call_context == CONTEXT_STORAGE)  ? "CONTEXT_STORAGE" : "CONTEXT_TIMER");
+
+    return;
+}
+
+void storageproto_usb_reset_ind(void)
+{
+    /* status reset */
+    BulkOutLength = 0;
+    StorageStatus = STORAGE_IDLE;
+
+    DBG_STORAGE_FD(KERN_INFO "storage_fd: storage protocol reset.\n");
+
+    return;
+}
+
+void storageproto_init(void)
+{
+    /* timer init */
+    init_timer(&BulkOutTim);
+
+    /* timer init */
+    init_timer(&MediaCheckTim);
+
+    return;
+}
+
+void storageproto_exit(void)
+{
+    /* device close */
+    storageproto_device_close();
+
+    /* delete timer */
+    del_timer(&BulkOutTim);
+
+    /* delete timer */
+    del_timer(&MediaCheckTim);
+
+    return;
+}
+
+ssize_t storageproto_proc_read(struct file* file, char* buf, size_t count,
+                               loff_t* pos)
+{
+    char    string[1024];
+    int     len = 0;
+
+    len += sprintf(string + len, "Protocol status:%s\n",
+            (StorageStatus == STORAGE_IDLE)   ? "STORAGE_IDLE" :
+            (StorageStatus == STORAGE_BULKIN) ? "STORAGE_BULKIN" :
+                                                "STORAGE_BULKOUT");
+
+    len += sprintf(string + len, "USB status:%s\n",
+            (UsbStatus == USB_DISCONNECT) ? "USB_DISCONNECT" :
+                                            "USB_CONNECT");
+
+    len += sprintf(string + len, "Media status:%s\n",
+            (MediaStatus == MEDIA_EJECT) ? "MEDIA_EJECT" :
+                                           "MEDIA_INSERT");
+
+    len += sprintf(string + len, "Media chage:%s\n",
+            (MediaChange == MEDIA_CHANGE_OFF) ? "MEDIA_CHANGE_OFF" :
+                                                "MEDIA_CHANGE_ON");
+
+    len += sprintf(string + len, "Device name:%s\n",
+            storage_device);
+
+    len += sprintf(string + len, "Device file descriptor:0x%p\n",
+            DeviceFile);
+
+    len += sprintf(string + len, "Device size:0x%d\n",
+            DeviceSize);
+
+    len += sprintf(string + len, "Device block size:0x%d\n",
+            DeviceBlockSize);
+
+    len += sprintf(string + len, "Device write protect:%s\n",
+            (DeviceWrProtect == WR_PROTECT_OFF) ? "WR_PROTECT_OFF":
+                                                  "WR_PROTECT_ON");
+
+    len += sprintf(string + len, "Bulk in max size:%ld\n",
+            StatMaxBulkInSize);
+
+    len += sprintf(string + len, "Bulk out max size:%ld\n",
+            StatMaxBulkOutSize);
+
+    len += sprintf(string + len, "device write error:%ld\n",
+            StatDevWriteError);
+
+    len += sprintf(string + len, "device read error:%ld\n",
+            StatDevReadError);
+
+    len += sprintf(string + len, "device flush error:%ld\n",
+            StatDevFlushError);
+
+    len += sprintf(string + len, "write data bulk out timout:%ld\n",
+            StatWriteTimout);
+
+    len += sprintf(string + len, "device write max time:%ld msec\n",
+            (StatMaxWriteTime * 1000) / HZ);
+
+    *pos += len;
+    if(len > count){
+        len = -EINVAL;
+    }
+    else
+    if(len > 0 && copy_to_user(buf, string, len)) {
+        len = -EFAULT;
+    }
+
+    return len;
+}
+
diff -Nur linux-2.4.18/drivers/usb/device/storage_fd/storageproto.h linux-2.4.18-usb-storage/drivers/usb/device/storage_fd/storageproto.h
--- linux-2.4.18/drivers/usb/device/storage_fd/storageproto.h	1970-01-01 03:00:00.000000000 +0300
+++ linux-2.4.18-usb-storage/drivers/usb/device/storage_fd/storageproto.h	2003-11-07 05:34:43.000000000 +0300
@@ -0,0 +1,585 @@
+/*
+ * linux/drivers/usb/device/storage_fd/storageproto.h - mass storage protocol library header
+ *
+ * Copyright (c) 2003 Lineo Solutions, Inc.
+ *
+ * Written by Shunnosuke kabata
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#ifndef _STORAGEPROTO_H_
+#define _STORAGEPROTO_H_
+
+/******************************************************************************
+** Macro Define
+******************************************************************************/
+
+/**************************************
+** Class Code
+**************************************/
+
+/*
+ * Class
+ */
+
+#define MASS_STORAGE_CLASS                  0x08
+
+/*
+ * SubClass
+ */
+
+#define MASS_STORAGE_SUBCLASS_RBC           0x01
+#define MASS_STORAGE_SUBCLASS_SFF8020I      0x02
+#define MASS_STORAGE_SUBCLASS_QIC157        0x03
+#define MASS_STORAGE_SUBCLASS_UFI           0x04
+#define MASS_STORAGE_SUBCLASS_SFF8070I      0x05
+#define MASS_STORAGE_SUBCLASS_SCSI          0x06
+
+/*
+ * Protocol
+ */
+
+#define MASS_STORAGE_PROTO_CBI_WITH_COMP    0x00
+#define MASS_STORAGE_PROTO_CBI_NO_COMP      0x01
+#define MASS_STORAGE_PROTO_BULK_ONLY        0x50
+
+/**************************************
+** SCSI Command
+**************************************/
+
+#define SCSI_FORMAT_UNT                      0x04
+#define SCSI_INQUIRY                         0x12
+#define SCSI_START_STOP                      0x1b
+#define SCSI_MODE_SELECT                     0x55
+#define SCSI_MODE_SENSE                      0x1a
+#define SCSI_PREVENT_ALLOW_MEDIUM_REMOVAL    0x1e
+#define SCSI_READ_10                         0x28
+#define SCSI_READ_12                         0xa8
+#define SCSI_READ_CAPACITY                   0x25
+#define SCSI_READ_FORMAT_CAPACITY            0x23
+#define SCSI_REQUEST_SENSE                   0x03
+#define SCSI_REZERO_UNIT                     0x01
+#define SCSI_SEEK_10                         0x2b
+#define SCSI_SEND_DIAGNOSTIC                 0x1d
+#define SCSI_TEST_UNIT_READY                 0x00
+#define SCSI_VERIFY                          0x2f
+#define SCSI_WRITE_10                        0x2a
+#define SCSI_WRITE_12                        0xaa
+#define SCSI_WRITE_AND_VERIFY                0x2e
+
+/**************************************
+** SCSI Command Parameter
+**************************************/
+
+#define CBW_SIGNATURE           0x43425355  /* USBC */
+#define CSW_SIGNATURE           0x53425355  /* USBS */
+
+#define PRODUCT_REVISION_LEVEL  "1.00"
+
+/**************************************
+** Status
+**************************************/
+
+#define WR_PROTECT_OFF      0
+#define WR_PROTECT_ON       1
+
+#define STORAGE_IDLE        0
+#define STORAGE_BULKIN      1
+#define STORAGE_BULKOUT     2
+
+#define USB_DISCONNECT      0
+#define USB_CONNECT         1
+
+#define MEDIA_EJECT         0
+#define MEDIA_INSERT        1
+
+#define MEDIA_CHANGE_OFF    0
+#define MEDIA_CHANGE_ON     1
+
+/**************************************
+** Mass Storage Thread Name
+**************************************/
+
+#define STORAGE_THREAD_NAME "usbdstorage"
+
+/**************************************
+** Media Signal Delay Time(ms)
+**************************************/
+
+#define USB_EVENT_DELAY_TIM 1000
+
+/**************************************
+** Write Bulk Out Check Time(ms)
+**************************************/
+
+#define WR_BULKOUT_CHK_TIM  1000
+
+/**************************************
+** Media Check Time(ms)
+**************************************/
+
+#define MEDIA_CHECK_TIM     3000
+#define MEDIA_CHECK_RETRY   3
+
+/**************************************
+** Context
+**************************************/
+
+#define CONTEXT_SCHEDULE    0
+#define CONTEXT_STORAGE     1
+#define CONTEXT_TIMER       2
+
+/**************************************
+** Debug Message
+**************************************/
+#if 0
+#define DBG_STORAGE_FD(fmt, args...)    printk(fmt, ##args)
+#else
+#define DBG_STORAGE_FD(fmt, args...)
+#endif
+
+/******************************************************************************
+** Structure Define
+******************************************************************************/
+
+/**************************************
+** Command Block Wrapper / Command Status Wrapper
+**************************************/
+
+/*
+ * Command Block Wrapper
+ */
+typedef struct{
+    unsigned long   dCBWSignature;
+    unsigned long   dCBWTag;
+    unsigned long   dCBWDataTransferLength;
+    unsigned char   bmCBWFlags;
+    unsigned char   bCBWLUN:4,
+                    Reserved:4;
+    unsigned char   bCBWCBLength:5,
+                    Reserved2:3;
+    unsigned char   CBWCB[16];
+} __attribute__((packed)) COMMAND_BLOCK_WRAPPER;
+
+/*
+ * Command Status Wrapper
+ */
+typedef struct{
+    unsigned long   dCSWSignature;
+    unsigned long   dCSWTag;
+    unsigned long   dCSWDataResidue;
+    unsigned char   bCSWStatus;
+} __attribute__((packed)) COMMAND_STATUS_WRAPPER;
+
+/**************************************
+** SCSI Command
+**************************************/
+
+/*
+ * INQUIRY
+ */
+
+typedef struct{
+    unsigned char   OperationCode;
+    unsigned char   EVPD:1,
+                    Reserved1:4,
+                    LogicalUnitNumber:3;
+    unsigned char   PageCode;
+    unsigned char   Reserved2;
+    unsigned char   AllocationLength;
+    unsigned char   Reserved3;
+    unsigned char   Reserved4;
+    unsigned char   Reserved5;
+    unsigned char   Reserved6;
+    unsigned char   Reserved7;
+    unsigned char   Reserved8;
+    unsigned char   Reserved9;
+} __attribute__((packed)) SCSI_INQUIRY_COMMAND;
+
+typedef struct{
+    unsigned char   PeripheralDeviceType:5,
+                    Reserved1:3;
+    unsigned char   Reserved2:7,
+                    RMB:1;
+    unsigned char   ANSIVersion:3,
+                    ECMAVersion:3,
+                    ISOVersion:2;
+    unsigned char   ResponseDataFormat:4,
+                    Reserved3:4;
+    unsigned char   AdditionalLength;
+    unsigned char   Reserved4;
+    unsigned char   Reserved5;
+    unsigned char   Reserved6;
+    unsigned char   VendorInformation[8];
+    unsigned char   ProductIdentification[16];
+    unsigned char   ProductRevisionLevel[4];
+} __attribute__((packed)) SCSI_INQUIRY_DATA;
+
+/*
+ * READ FORMAT CAPACITY
+ */
+
+typedef struct{
+    unsigned char   OperationCode;
+    unsigned char   Reserved1:5,
+                    LogicalUnitNumber:3;
+    unsigned char   Reserved2;
+    unsigned char   Reserved3;
+    unsigned char   Reserved4;
+    unsigned char   Reserved5;
+    unsigned char   Reserved6;
+    unsigned char   AllocationLength[2];
+    unsigned char   Reserved7;
+    unsigned char   Reserved8;
+    unsigned char   Reserved9;
+} __attribute__((packed)) SCSI_READ_FORMAT_CAPACITY_COMMAND;
+
+typedef struct{
+    struct{
+        unsigned char   Reserved1;
+        unsigned char   Reserved2;
+        unsigned char   Reserved3;
+        unsigned char   CapacityListLength;
+    } __attribute__((packed)) CapacityListHeader;
+    struct{
+        unsigned char   NumberofBlocks[4];
+        unsigned char   DescriptorCode:2,
+                        Reserved1:6;
+        unsigned char   BlockLength[3];
+    } __attribute__((packed)) CurrentMaximumCapacityDescriptor;
+} __attribute__((packed)) SCSI_READ_FORMAT_CAPACITY_DATA;
+
+/*
+ * READ FORMAT CAPACITY
+ */
+
+typedef struct{
+    unsigned char   OperationCode;
+    unsigned char   RelAdr:1,
+                    Reserved1:4,
+                    LogicalUnitNumber:3;
+    unsigned char   LogicalBlockAddress[4];
+    unsigned char   Reserved2;
+    unsigned char   Reserved3;
+    unsigned char   PMI:1,
+                    Reserved4:7;
+    unsigned char   Reserved5;
+    unsigned char   Reserved6;
+    unsigned char   Reserved7;
+} __attribute__((packed)) SCSI_READ_CAPACITY_COMMAND;
+
+typedef struct{
+    unsigned char   LastLogicalBlockAddress[4];
+    unsigned char   BlockLengthInBytes[4];
+} __attribute__((packed)) SCSI_READ_CAPACITY_DATA;
+
+/*
+ * REQUEST SENSE
+ */
+
+typedef struct{
+    unsigned char   OperationCode;
+    unsigned char   Reserved1:5,
+                    LogicalUnitNumber:3;
+    unsigned char   Reserved2;
+    unsigned char   Reserved3;
+    unsigned char   AllocationLength;
+    unsigned char   Reserved4;
+    unsigned char   Reserved5;
+    unsigned char   Reserved6;
+    unsigned char   Reserved7;
+    unsigned char   Reserved8;
+    unsigned char   Reserved9;
+    unsigned char   Reserved10;
+} __attribute__((packed)) SCSI_REQUEST_SENSE_COMMAND;
+
+typedef struct{
+    unsigned char   ErrorCode:7,
+                    Valid:1;
+    unsigned char   Reserved1;
+    unsigned char   SenseKey:4,
+                    Reserved2:4;
+    unsigned char   Information[4];
+    unsigned char   AdditionalSenseLength;
+    unsigned char   Reserved3[4];
+    unsigned char   AdditionalSenseCode;
+    unsigned char   AdditionalSenseCodeQualifier;
+    unsigned char   Reserved4;
+    unsigned char   Reserved5[3];
+} __attribute__((packed)) SCSI_REQUEST_SENSE_DATA;
+
+/*
+ * READ(10)
+ */
+
+typedef struct{
+    unsigned char   OperationCode;
+    unsigned char   RelAdr:1,
+                    Reserved1:2,
+                    FUA:1,
+                    DPO:1,
+                    LogicalUnitNumber:3;
+    unsigned char   LogicalBlockAddress[4];
+    unsigned char   Reserved2;
+    unsigned char   TransferLength[2];
+    unsigned char   Reserved3;
+    unsigned char   Reserved4;
+    unsigned char   Reserved5;
+} __attribute__((packed)) SCSI_READ_10_COMMAND;
+
+/*
+ * MODE SENSE
+ */
+
+typedef struct{
+    unsigned char   OperationCode;
+    unsigned char   Reserved1:3,
+                    DBD:1,
+                    Reserved2:1,
+                    LogicalUnitNumber:3;
+    unsigned char   PageCode:6,
+                    PC:2;
+    unsigned char   Reserved3;
+    unsigned char   Reserved4;
+    unsigned char   Reserved5;
+    unsigned char   Reserved6;
+    unsigned char   ParameterListLength[2];
+    unsigned char   Reserved7;
+    unsigned char   Reserved8;
+    unsigned char   Reserved9;
+} __attribute__((packed)) SCSI_MODE_SENSE_COMMAND;
+
+typedef struct{
+    unsigned char   ModeDataLength;
+    unsigned char   MediumTypeCode;
+    unsigned char   Reserved1:4,
+                    DPOFUA:1,
+                    Reserved2:2,
+                    WP:1;
+    unsigned char   Reserved3;
+} __attribute__((packed)) MODE_PARAMETER_HEADER;
+
+typedef struct{
+    unsigned char   PageCode:6,
+                    Reserved1:1,
+                    PS:1;
+    unsigned char   PageLength;
+    unsigned char   DCR:1,
+                    Reserved2:1,
+                    PER:1,
+                    Reserved3:1,
+                    RC:1,
+                    Reserved4:1,
+                    Reserved5:1,
+                    AWRE:1;
+    unsigned char   ReadRetryCount;
+    unsigned char   Reserved6[4];
+    unsigned char   WriteRetryCount;
+    unsigned char   Reserved7[3];
+} __attribute__((packed)) READ_WRITE_ERROR_RECOVERY_PAGE;
+
+typedef struct{
+    unsigned char   PageCode:6,
+                    Reserved1:1,
+                    PS:1;
+    unsigned char   PageLength;
+    unsigned char   TransferRate[2];
+    unsigned char   NumberofHeads;
+    unsigned char   SectorsperTrack;
+    unsigned char   DataBytesperSector[2];
+    unsigned char   NumberofCylinders[2];
+    unsigned char   Reserved2[9];
+    unsigned char   MotorOnDelay;
+    unsigned char   MotorOffDelay;
+    unsigned char   Reserved3[7];
+    unsigned char   MediumRotationRate[2];
+    unsigned char   Reserved4;
+    unsigned char   Reserved5;
+} __attribute__((packed)) FLEXIBLE_DISK_PAGE;
+
+typedef struct{
+    unsigned char   PageCode:6,
+                    Reserved1:1,
+                    PS:1;
+    unsigned char   PageLength;
+    unsigned char   Reserved2:6,
+                    SRFP:1,
+                    SFLP:1;
+    unsigned char   TLUN:3,
+                    Reserved3:3,
+                    SML:1,
+                    NCD:1;
+    unsigned char   Reserved4[8];
+} __attribute__((packed)) REMOVABLE_BLOCK_ACCESS_CAPABILITIES_PAGE;
+
+typedef struct{
+    unsigned char   PageCode:6,
+                    Reserved1:1,
+                    PS:1;
+    unsigned char   PageLength;
+    unsigned char   Reserved2;
+    unsigned char   InactivityTimeMultiplier:4,
+                    Reserved3:4;
+    unsigned char   SWPP:1,
+                    DISP:1,
+                    Reserved4:6;
+    unsigned char   Reserved5;
+    unsigned char   Reserved6;
+    unsigned char   Reserved7;
+} __attribute__((packed)) TIMER_AND_PROTECT_PAGE;
+
+typedef struct{
+    READ_WRITE_ERROR_RECOVERY_PAGE              ReadWriteErrorRecoveryPage;
+    FLEXIBLE_DISK_PAGE                          FlexibleDiskPage;
+    REMOVABLE_BLOCK_ACCESS_CAPABILITIES_PAGE    RemovableBlockAccessCapabilitiesPage;
+    TIMER_AND_PROTECT_PAGE                      TimerAndProtectPage;
+} __attribute__((packed)) MODE_ALL_PAGES;
+
+typedef struct{
+    MODE_PARAMETER_HEADER   ModeParameterHeader;
+    union{
+        READ_WRITE_ERROR_RECOVERY_PAGE              ReadWriteErrorRecoveryPage;
+        FLEXIBLE_DISK_PAGE                          FlexibleDiskPage;
+        REMOVABLE_BLOCK_ACCESS_CAPABILITIES_PAGE    RemovableBlockAccessCapabilitiesPage;
+        TIMER_AND_PROTECT_PAGE                      TimerAndProtectPage;
+        MODE_ALL_PAGES                              ModeAllPages;
+    } __attribute__((packed)) ModePages;
+} __attribute__((packed)) SCSI_MODE_SENSE_DATA;
+
+/*
+ * TEST UNIT READY
+ */
+
+typedef struct{
+    unsigned char   OperationCode;
+    unsigned char   Reserved1:5,
+                    LogicalUnitNumber:3;
+    unsigned char   Reserved2;
+    unsigned char   Reserved3;
+    unsigned char   Reserved4;
+    unsigned char   Reserved5;
+    unsigned char   Reserved6;
+    unsigned char   Reserved7;
+    unsigned char   Reserved8;
+    unsigned char   Reserved9;
+    unsigned char   Reserved10;
+    unsigned char   Reserved11;
+} __attribute__((packed)) SCSI_TEST_UNIT_READY_COMMAND;
+
+/*
+ * PREVENT-ALLOW MEDIUM REMOVAL
+ */
+
+typedef struct{
+    unsigned char   OperationCode;
+    unsigned char   Reserved1:5,
+                    LogicalUnitNumber:3;
+    unsigned char   Reserved2;
+    unsigned char   Reserved3;
+    unsigned char   Prevent:1,
+                    Reserved4:7;
+    unsigned char   Reserved5;
+    unsigned char   Reserved6;
+    unsigned char   Reserved7;
+    unsigned char   Reserved8;
+    unsigned char   Reserved9;
+    unsigned char   Reserved10;
+    unsigned char   Reserved11;
+} __attribute__((packed)) SCSI_PREVENT_ALLOW_MEDIUM_REMOVAL_COMMAND;
+
+/*
+ * START-STOP UNIT
+ */
+
+typedef struct{
+    unsigned char   OperationCode;
+    unsigned char   IMMED:1,
+                    Reserved1:4,
+                    LogicalUnitNumber:3;
+    unsigned char   Reserved2;
+    unsigned char   Reserved3;
+    unsigned char   Start:1,
+                    LoEj:1,
+                    Reserved4:6;
+    unsigned char   Reserved5;
+    unsigned char   Reserved6;
+    unsigned char   Reserved7;
+    unsigned char   Reserved8;
+    unsigned char   Reserved9;
+    unsigned char   Reserved10;
+    unsigned char   Reserved11;
+} __attribute__((packed)) SCSI_START_STOP_COMMAND;
+
+/*
+ * WRITE(10)
+ */
+
+typedef struct{
+    unsigned char   OperationCode;
+    unsigned char   RelAdr:1,
+                    Reserved1:2,
+                    FUA:1,
+                    DPO:1,
+                    LogicalUnitNumber:3;
+    unsigned char   LogicalBlockAddress[4];
+    unsigned char   Reserved2;
+    unsigned char   TransferLength[2];
+    unsigned char   Reserved3;
+    unsigned char   Reserved4;
+    unsigned char   Reserved5;
+} __attribute__((packed)) SCSI_WRITE_10_COMMAND;
+
+/*
+ * VERIFY
+ */
+
+typedef struct{
+    unsigned char   OperationCode;
+    unsigned char   RelAdr:1,
+                    ByteChk:1,
+                    Reserved1:1,
+                    Reserved2:1,
+                    DPO:1,
+                    LogicalUnitNumber:3;
+    unsigned char   LogicalBlockAddress[4];
+    unsigned char   Reserved3;
+    unsigned char   VerificationLength[2];
+    unsigned char   Reserved4;
+    unsigned char   Reserved5;
+    unsigned char   Reserved6;
+} __attribute__((packed)) SCSI_VERIFY_COMMAND;
+
+/******************************************************************************
+** Global Function Prototype
+******************************************************************************/
+
+/* storage-fd.c */
+void    storage_urb_send(struct usb_device_instance*, void*, int);
+
+/* storageproto.c */
+void    storageproto_urb_analysis(struct urb*);
+int     storageproto_device_open_check(void);
+void    storageproto_device_close(void);
+void    storageproto_usb_status_check(int);
+void    storageproto_media_status_check(int);
+void    storageproto_usb_reset_ind(void);
+ssize_t storageproto_proc_read(struct file*, char*, size_t, loff_t* pos);
+void    storageproto_init(void);
+void    storageproto_exit(void);
+
+#endif  /* _STORAGEPROTO_H_ */
+