summaryrefslogtreecommitdiff
path: root/recipes/linux/linux-rp-2.6.24/spitz_h_rewrite.patch
blob: df6d5f66c2e2f40deec300c0a2400e4edb0577b8 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
http://www.uwsg.indiana.edu/hypermail/linux/kernel/0802.1/3541.html

Here is a rewrite of spitz.h, which includes comments documenting
function of particular GPIO pins.

spitz_h_rewrite.patch provides:
- no changes in compiled code
- partial spitz.h rewrite:
  * organized by function
  * describes complete GPIO pinout
  * comments added
  * removed defines cloning pxa-regs.h
- prefer generic pxa-regs.h GPIO if available
- use GPIO names instead of numbers

Thanks to Trisoft for providing needed information.

Index: linux-2.6.24/arch/arm/mach-pxa/spitz_pm.c
===================================================================
--- linux-2.6.24.orig/arch/arm/mach-pxa/spitz_pm.c	2008-01-24 22:58:37.000000000 +0000
+++ linux-2.6.24/arch/arm/mach-pxa/spitz_pm.c	2008-02-13 13:49:22.000000000 +0000
@@ -110,9 +110,9 @@
 	pxa_gpio_mode(GPIO18_RDY|GPIO_OUT | GPIO_DFLT_HIGH);
 
 	PRER = GPIO_bit(SPITZ_GPIO_KEY_INT);
-	PFER = GPIO_bit(SPITZ_GPIO_KEY_INT) | GPIO_bit(SPITZ_GPIO_RESET);
-	PWER = GPIO_bit(SPITZ_GPIO_KEY_INT) | GPIO_bit(SPITZ_GPIO_RESET) | PWER_RTC;
-	PKWR = GPIO_bit(SPITZ_GPIO_SYNC) | GPIO_bit(SPITZ_GPIO_KEY_INT) | GPIO_bit(SPITZ_GPIO_RESET);
+	PFER = GPIO_bit(SPITZ_GPIO_KEY_INT) | GPIO_bit(GPIO1_RST);
+	PWER = GPIO_bit(SPITZ_GPIO_KEY_INT) | GPIO_bit(GPIO1_RST) | PWER_RTC;
+	PKWR = GPIO_bit(SPITZ_GPIO_SYNC) | GPIO_bit(SPITZ_GPIO_KEY_INT) | GPIO_bit(GPIO1_RST);
 	PKSR = 0xffffffff; // clear
 
 	/* nRESET_OUT Disable */
@@ -128,7 +128,7 @@
 static void spitz_postsuspend(void)
 {
 	pxa_gpio_mode(GPIO18_RDY_MD);
-	pxa_gpio_mode(10 | GPIO_IN);
+	pxa_gpio_mode(SPITZ_GPIO_NC_10 | GPIO_IN);
 }
 
 static int spitz_should_wakeup(unsigned int resume_on_alarm)
Index: linux-2.6.24/drivers/video/pxafb.c
===================================================================
--- linux-2.6.24.orig/drivers/video/pxafb.c	2008-02-13 13:49:04.000000000 +0000
+++ linux-2.6.24/drivers/video/pxafb.c	2008-02-13 13:49:57.000000000 +0000
@@ -920,7 +920,7 @@
 		return;
         }
 
-	for (gpio = 58; ldd_bits > 0; gpio++, ldd_bits--) {
+	for (gpio = GPIO58_LDD_0; ldd_bits > 0; gpio++, ldd_bits--) {
 		pxa_gpio_mode(gpio | GPIO_ALT_FN_2_OUT);
 	}
 	pxa_gpio_mode(GPIO74_LCD_FCLK_MD);
Index: linux-2.6.24/include/asm-arm/arch-pxa/akita.h
===================================================================
--- linux-2.6.24.orig/include/asm-arm/arch-pxa/akita.h	2008-01-24 22:58:37.000000000 +0000
+++ linux-2.6.24/include/asm-arm/arch-pxa/akita.h	2008-02-13 13:49:22.000000000 +0000
@@ -12,11 +12,11 @@
 /* Akita IO Expander GPIOs */
 
 #define AKITA_IOEXP_RESERVED_7      (1 << 7)
-#define AKITA_IOEXP_IR_ON           (1 << 6)
-#define AKITA_IOEXP_AKIN_PULLUP     (1 << 5)
-#define AKITA_IOEXP_BACKLIGHT_CONT  (1 << 4)
-#define AKITA_IOEXP_BACKLIGHT_ON    (1 << 3)
-#define AKITA_IOEXP_MIC_BIAS        (1 << 2)
+#define AKITA_IOEXP_IR_ON           (1 << 6)	/* IrDA On */
+#define AKITA_IOEXP_AKIN_PULLUP     (1 << 5)	/* Pull-Up for Remote */
+#define AKITA_IOEXP_BACKLIGHT_CONT  (1 << 4)	/* Backlight Control */
+#define AKITA_IOEXP_BACKLIGHT_ON    (1 << 3)	/* Backlight On */
+#define AKITA_IOEXP_MIC_BIAS        (1 << 2)	/* Mic Bias On */
 #define AKITA_IOEXP_RESERVED_1      (1 << 1)
 #define AKITA_IOEXP_RESERVED_0      (1 << 0)
 
Index: linux-2.6.24/include/asm-arm/arch-pxa/pxa-regs.h
===================================================================
--- linux-2.6.24.orig/include/asm-arm/arch-pxa/pxa-regs.h	2008-02-13 13:49:07.000000000 +0000
+++ linux-2.6.24/include/asm-arm/arch-pxa/pxa-regs.h	2008-02-13 13:49:22.000000000 +0000
@@ -1334,6 +1334,7 @@
 #define GPIO85_nPCE_1		85	/* Card Enable for Card Space (PXA27x) */
 #define GPIO92_MMCDAT0		92	/* MMC DAT0 (PXA27x) */
 #define GPIO102_nPCE_1		102	/* PCMCIA (PXA27x) */
+#define GPIO104_pSKTSEL		104	/* PCMCIA Socket Select (PXA27x) */
 #define GPIO109_MMCDAT1		109	/* MMC DAT1 (PXA27x) */
 #define GPIO110_MMCDAT2		110	/* MMC DAT2 (PXA27x) */
 #define GPIO110_MMCCS0		110	/* MMC Chip Select 0 (PXA27x) */
Index: linux-2.6.24/include/asm-arm/arch-pxa/spitz.h
===================================================================
--- linux-2.6.24.orig/include/asm-arm/arch-pxa/spitz.h	2008-02-13 13:49:01.000000000 +0000
+++ linux-2.6.24/include/asm-arm/arch-pxa/spitz.h	2008-02-13 13:49:22.000000000 +0000
@@ -1,8 +1,9 @@
 /*
- * Hardware specific definitions for SL-Cx000 series of PDAs
+ * Hardware specific definitions for SL-Cxx00 series of PDAs
  *
  * Copyright (c) 2005 Alexander Wykes
  * Copyright (c) 2005 Richard Purdie
+ * Copyright (c) 2008 Stanislav Brabec
  *
  * Based on Sharp's 2.4 kernel patches
  *
@@ -13,140 +14,257 @@
  */
 #ifndef __ASM_ARCH_SPITZ_H
 #define __ASM_ARCH_SPITZ_H  1
-#endif
 
-#include <linux/fb.h>
+#include <asm-arm/arch-pxa/irqs.h>
+#include <linux/platform_device.h>
 
 /* Spitz/Akita GPIOs */
 
-#define SPITZ_GPIO_KEY_INT         (0) /* Key Interrupt */
-#define SPITZ_GPIO_RESET           (1)
-#define SPITZ_GPIO_nSD_DETECT      (9)
-#define SPITZ_GPIO_TP_INT          (11) /* Touch Panel interrupt */
-#define SPITZ_GPIO_AK_INT          (13) /* Remote Control */
-#define SPITZ_GPIO_ADS7846_CS      (14)
-#define SPITZ_GPIO_SYNC            (16)
-#define SPITZ_GPIO_MAX1111_CS      (20)
-#define SPITZ_GPIO_FATAL_BAT       (21)
-#define SPITZ_GPIO_HSYNC           (22)
-#define SPITZ_GPIO_nSD_CLK         (32)
-#define SPITZ_GPIO_USB_DEVICE      (35)
-#define SPITZ_GPIO_USB_HOST        (37)
-#define SPITZ_GPIO_USB_CONNECT     (41)
-#define SPITZ_GPIO_LCDCON_CS       (53)
-#define SPITZ_GPIO_nPCE            (54)
-#define SPITZ_GPIO_nSD_WP          (81)
-#define SPITZ_GPIO_ON_RESET        (89)
-#define SPITZ_GPIO_BAT_COVER       (90)
-#define SPITZ_GPIO_CF_CD           (94)
-#define SPITZ_GPIO_ON_KEY          (95)
-#define SPITZ_GPIO_SWA             (97)
-#define SPITZ_GPIO_SWB             (96)
-#define SPITZ_GPIO_CHRG_FULL       (101)
-#define SPITZ_GPIO_CO              (101)
-#define SPITZ_GPIO_CF_IRQ          (105)
-#define SPITZ_GPIO_AC_IN           (115)
-#define SPITZ_GPIO_HP_IN           (116)
+/* This list refers to all GPIO pins either in defines or in comments.
+ *
+ * GPIO pins not listed:
+ * GPIO2	SYS_EN: 		System Power Enable
+ * GPIO5-GPIO8	PWR_CAP0-PWR_CAP3:	sleep DC-DC converter power capacitors
+ * GPIO40	not connected
+ */
 
-/* Spitz Only GPIOs */
 
-#define SPITZ_GPIO_CF2_IRQ         (106) /* CF slot1 Ready */
-#define SPITZ_GPIO_CF2_CD          (93)
+/* Spitz/Akita System GPIO */
+
+#define SPITZ_GPIO_KEY_INT	   (0)	/* Key Interrupt */
+#define SPITZ_GPIO_SYNC		  (16)	/* IOPORT Wake Up (input) */
+#define SPITZ_GPIO_NAND_CS	  (79)	/* NAND Flash Chip Select */
+#define SPITZ_GPIO_NC_10	  (10)	/* Not Connected (but used in kernel) */
+/* This GPIO pin is connected:
+ * GPIO1_RST
+ */
 
 
+/* Compact Flash Interface */
+
+/* Spitz/Akita Compact Flash Interface */
+#define SPITZ_GPIO_CF_CD	  (94)	/* CF IRQ */
+#define SPITZ_GPIO_CF_IRQ	 (105)	/* CF Ready */
+/* These GPIO pins are connected:
+ * GPIO48_nPOE
+ * GPIO49_nPWE
+ * GPIO50_nPIOR
+ * GPIO51_nPIOW
+ * GPIO54_nPCE_2
+ * GPIO55_nPREG
+ * GPIO56_nPWAIT
+ * GPIO57_nIOIS16
+ * GPIO80_nCS_4
+ * GPIO85_nPCE_1
+ * GPIO104_pSKTSEL
+ */
+
+/* Spitz only Compact Flash Interface */
+#define SPITZ_GPIO_CF2_CD	  (93)	/* CF slot1 IRQ */
+#define SPITZ_GPIO_CF2_IRQ	 (106)	/* CF slot1 Ready */
+/* This GPIO pin is connected:
+ * GPIO78_nCS_2
+ */
+
+
+/* Spitz/Akita Battery, Power and Service Connector */
+
+#define SPITZ_GPIO_FATAL_BAT	  (21)	/* Fatal Battery */
+#define SPITZ_GPIO_BAT_COVER	  (90)	/* Battery Cover switch */
+#define SPITZ_GPIO_BAT_COVER2	  (15)	/* Battery Cover switch, parallel pin */
+#define SPITZ_GPIO_CHRG_FULL	 (101)	/* Battery Full */
+#define SPITZ_GPIO_AC_IN	 (115)	/* External Power Supply is active */
+#define SPITZ_GPIO_ON_RESET	  (89)	/* Software Reset */
+#define SPITZ_GPIO_SERVICE0	  (83)	/* Service Connector */
+#define SPITZ_GPIO_SERVICE1	  (84)	/* Service Connector */
+/* This GPIO pin is connected:
+ * GPIO18_RDY
+ */
+
+
+/* Spitz/Akita Display Controller */
+
+#define SPITZ_GPIO_HSYNC	  (22)	/* Line Sync Feedback */
+/* These GPIO pins are connected:
+ * GPIO58_LDD_0-GPIO58_LDD_15
+ * GPIO74_LCD_FCLK
+ * GPIO75_LCD_LCLK
+ * GPIO76_LCD_PCLK
+ * GPIO77_LCD_ACBIAS
+ */
+
+
+/* Spitz/Akita SSP/SPI Bus and Devices */
+
+#define SPITZ_GPIO_SSP_CLK	  (19)	/* SSP bus Clock */
+#define SPITZ_GPIO_SSP_RXD	  (86)	/* SSP bus RxD */
+#define SPITZ_GPIO_SSP_TXD	  (87)	/* SSP bus TxD */
+#define SPITZ_GPIO_TP_INT	  (11)	/* Touch Panel IRQ */
+#define SPITZ_GPIO_ADS7846_CS	  (14)	/* Touch Panel Controller Chip Select */
+#define SPITZ_GPIO_MAX1111_CS	  (20)	/* Multi Channel ADC Chip Select */
+#define SPITZ_GPIO_LCDCON_CS	  (53)	/* LCD Controller Chip Select */
+
+
+/* Spitz/Akita Supplementary USB OTG Pins */
+
+#define SPITZ_GPIO_USB_DEVICE	  (35)	/* USB Client power is present */
+#define SPITZ_GPIO_USB_HOST	  (37)	/* USB OTG 5V Host power supply control */
+#define SPITZ_GPIO_USB_CONNECT	  (41)	/* USB Host Cable is connected */
+
+
+/* Spitz/Akita Audio */
+
+#define SPITZ_GPIO_HP_IN	 (116)	/* CPU Headphone detect */
+#define SPITZ_GPIO_AK_INT	  (13)	/* Remote Control detect */
+/* These GPIO AC97 pins are connected:
+ * GPIO28_BITCLK
+ * GPIO29_SDATA_IN
+ * GPIO30_SDATA_OUT
+ * GPIO31_SYNC
+ * GPIO113_AC97_RESET_N
+ */
+
+
+/* Spitz/Akita SD Slot */
+
+#define SPITZ_GPIO_nSD_DETECT	  (9)	/* SD Card Presence */
+#define SPITZ_GPIO_nSD_WP	 (81)	/* SD Write Protection */
+/* These GPIO pins are connected:
+ * GPIO32_MMCCLK
+ * GPIO92_MMCDAT0
+ * GPIO109_MMCDAT1
+ * GPIO110_MMCDAT2
+ * GPIO111_MMCDAT3
+ * GPIO112_MMCCMD
+ */
+
+/* Spitz/Akita I2C bus */
+#define SPITZ_GPIO_SCL		 (117)	/* I2C SCL */
+#define SPITZ_GPIO_SDA		 (118)	/* I2C SDA */
+#define SPITZ_GPIO_PWR_SCL	   (3)	/* I2C SCL power */
+#define SPITZ_GPIO_PWR_SDA	   (4)	/* I2C SDA power */
+
+/* audio codec pins */
+
+
+/* Spitz/Akita UART ports */
+
+/* Fully Featured UART - connected to IOPORT connector */
+#define SPITZ_GPIO_FFRXD	 (102)	/* IOPORT has nRXD inverted levels */
+#define SPITZ_GPIO_FFTXD	  (99)	/* IOPORT has nTXD inverted levels */
+#define SPITZ_GPIO_FFRTS	  (98)
+#define SPITZ_GPIO_FFCTS	 (100)
+#define SPITZ_GPIO_FFDTR	  (82)
+#define SPITZ_GPIO_FFDSR	  (33)
+
+/* These UART GPIO pins are connected to Bluetooth
+ * (only on Akita version with Bluetooth)
+ * GPIO42_BTRXD
+ * GPIO43_BTTXD
+ * GPIO44_BTCTS
+ * GPIO45_BTRTS
+ */
+
+/* These UART GPIO pins are connected to IrDA:
+ * GPIO46_STRXD
+ * GPIO47_STTXD
+ */
+
 /* Spitz/Akita Keyboard Definitions */
 
-#define SPITZ_KEY_STROBE_NUM         (11)
-#define SPITZ_KEY_SENSE_NUM          (7)
-#define SPITZ_GPIO_G0_STROBE_BIT     0x0f800000
-#define SPITZ_GPIO_G1_STROBE_BIT     0x00100000
-#define SPITZ_GPIO_G2_STROBE_BIT     0x01000000
-#define SPITZ_GPIO_G3_STROBE_BIT     0x00041880
-#define SPITZ_GPIO_G0_SENSE_BIT      0x00021000
-#define SPITZ_GPIO_G1_SENSE_BIT      0x000000d4
-#define SPITZ_GPIO_G2_SENSE_BIT      0x08000000
-#define SPITZ_GPIO_G3_SENSE_BIT      0x00000000
-
-#define SPITZ_GPIO_KEY_STROBE0       88
-#define SPITZ_GPIO_KEY_STROBE1       23
-#define SPITZ_GPIO_KEY_STROBE2       24
-#define SPITZ_GPIO_KEY_STROBE3       25
-#define SPITZ_GPIO_KEY_STROBE4       26
-#define SPITZ_GPIO_KEY_STROBE5       27
-#define SPITZ_GPIO_KEY_STROBE6       52
-#define SPITZ_GPIO_KEY_STROBE7       103
-#define SPITZ_GPIO_KEY_STROBE8       107
-#define SPITZ_GPIO_KEY_STROBE9       108
-#define SPITZ_GPIO_KEY_STROBE10      114
-
-#define SPITZ_GPIO_KEY_SENSE0        12
-#define SPITZ_GPIO_KEY_SENSE1        17
-#define SPITZ_GPIO_KEY_SENSE2        91
-#define SPITZ_GPIO_KEY_SENSE3        34
-#define SPITZ_GPIO_KEY_SENSE4        36
-#define SPITZ_GPIO_KEY_SENSE5        38
-#define SPITZ_GPIO_KEY_SENSE6        39
+#define SPITZ_KEY_STROBE_NUM	  (11)
+#define SPITZ_KEY_SENSE_NUM	   (7)
+#define SPITZ_GPIO_G0_STROBE_BIT  0x0f800000
+#define SPITZ_GPIO_G1_STROBE_BIT  0x00100000
+#define SPITZ_GPIO_G2_STROBE_BIT  0x01000000
+#define SPITZ_GPIO_G3_STROBE_BIT  0x00041880
+#define SPITZ_GPIO_G0_SENSE_BIT   0x00021000
+#define SPITZ_GPIO_G1_SENSE_BIT   0x000000d4
+#define SPITZ_GPIO_G2_SENSE_BIT   0x08000000
+#define SPITZ_GPIO_G3_SENSE_BIT   0x00000000
+#define SPITZ_GPIO_KEY_STROBE0	  (88)
+#define SPITZ_GPIO_KEY_STROBE1	  (23)
+#define SPITZ_GPIO_KEY_STROBE2	  (24)
+#define SPITZ_GPIO_KEY_STROBE3	  (25)
+#define SPITZ_GPIO_KEY_STROBE4	  (26)
+#define SPITZ_GPIO_KEY_STROBE5	  (27)
+#define SPITZ_GPIO_KEY_STROBE6	  (52)
+#define SPITZ_GPIO_KEY_STROBE7   (103)
+#define SPITZ_GPIO_KEY_STROBE8   (107)
+#define SPITZ_GPIO_KEY_STROBE9   (108)
+#define SPITZ_GPIO_KEY_STROBE10  (114)
+#define SPITZ_GPIO_KEY_SENSE0	  (12)
+#define SPITZ_GPIO_KEY_SENSE1	  (17)
+#define SPITZ_GPIO_KEY_SENSE2	  (91)
+#define SPITZ_GPIO_KEY_SENSE3	  (34)
+#define SPITZ_GPIO_KEY_SENSE4	  (36)
+#define SPITZ_GPIO_KEY_SENSE5	  (38)
+#define SPITZ_GPIO_KEY_SENSE6	  (39)
+
+#define SPITZ_GPIO_SWA		  (97)	/* Keyboard Interrupt A */
+#define SPITZ_GPIO_SWB		  (96)	/* Keyboard Interrupt B */
+#define SPITZ_GPIO_ON_KEY	  (95)	/* Power On Key */
 
 
-/* Spitz Scoop Device (No. 1) GPIOs */
+/* Spitz/Akita Scoop Device (No. 1) GPIOs */
 /* Suspend States in comments */
-#define SPITZ_SCP_LED_GREEN     SCOOP_GPCR_PA11  /* Keep */
-#define SPITZ_SCP_JK_B          SCOOP_GPCR_PA12  /* Keep */
-#define SPITZ_SCP_CHRG_ON       SCOOP_GPCR_PA13  /* Keep */
-#define SPITZ_SCP_MUTE_L        SCOOP_GPCR_PA14  /* Low */
-#define SPITZ_SCP_MUTE_R        SCOOP_GPCR_PA15  /* Low */
-#define SPITZ_SCP_CF_POWER      SCOOP_GPCR_PA16  /* Keep */
-#define SPITZ_SCP_LED_ORANGE    SCOOP_GPCR_PA17  /* Keep */
-#define SPITZ_SCP_JK_A          SCOOP_GPCR_PA18  /* Low */
-#define SPITZ_SCP_ADC_TEMP_ON   SCOOP_GPCR_PA19  /* Low */
+#define SPITZ_SCP_LED_GREEN	SCOOP_GPCR_PA11  /* Green LED, Keep */
+#define SPITZ_SCP_JK_B		SCOOP_GPCR_PA12  /* Fast Charge On, Keep */
+#define SPITZ_SCP_CHRG_ON	SCOOP_GPCR_PA13  /* Charge On, Keep */
+#define SPITZ_SCP_MUTE_L	SCOOP_GPCR_PA14  /* Extra Mute Left, Low */
+#define SPITZ_SCP_MUTE_R	SCOOP_GPCR_PA15  /* Extra Mute Right, Low */
+#define SPITZ_SCP_CF_POWER	SCOOP_GPCR_PA16  /* CF+SD Power Circuit, Keep */
+#define SPITZ_SCP_LED_ORANGE	SCOOP_GPCR_PA17  /* Orange LED, Keep */
+#define SPITZ_SCP_JK_A		SCOOP_GPCR_PA18  /* Dummy Load, Low */
+#define SPITZ_SCP_ADC_TEMP_ON	SCOOP_GPCR_PA19  /* Battery Sensor On, Low */
 
 #define SPITZ_SCP_IO_DIR      (SPITZ_SCP_LED_GREEN | SPITZ_SCP_JK_B | SPITZ_SCP_CHRG_ON | \
-                               SPITZ_SCP_MUTE_L | SPITZ_SCP_MUTE_R | SPITZ_SCP_LED_ORANGE | \
-                               SPITZ_SCP_CF_POWER | SPITZ_SCP_JK_A | SPITZ_SCP_ADC_TEMP_ON)
+			       SPITZ_SCP_MUTE_L | SPITZ_SCP_MUTE_R | SPITZ_SCP_LED_ORANGE | \
+			       SPITZ_SCP_CF_POWER | SPITZ_SCP_JK_A | SPITZ_SCP_ADC_TEMP_ON)
 #define SPITZ_SCP_IO_OUT      (SPITZ_SCP_CHRG_ON | SPITZ_SCP_MUTE_L | SPITZ_SCP_MUTE_R)
 #define SPITZ_SCP_SUS_CLR     (SPITZ_SCP_MUTE_L | SPITZ_SCP_MUTE_R | SPITZ_SCP_JK_A | SPITZ_SCP_ADC_TEMP_ON)
 #define SPITZ_SCP_SUS_SET     0
 
 /* Spitz Scoop Device (No. 2) GPIOs */
-/* Suspend States in comments */
-#define SPITZ_SCP2_IR_ON           SCOOP_GPCR_PA11  /* High */
-#define SPITZ_SCP2_AKIN_PULLUP     SCOOP_GPCR_PA12  /* Keep */
-#define SPITZ_SCP2_RESERVED_1      SCOOP_GPCR_PA13  /* High */
-#define SPITZ_SCP2_RESERVED_2      SCOOP_GPCR_PA14  /* Low */
-#define SPITZ_SCP2_RESERVED_3      SCOOP_GPCR_PA15  /* Low */
-#define SPITZ_SCP2_RESERVED_4      SCOOP_GPCR_PA16  /* Low */
-#define SPITZ_SCP2_BACKLIGHT_CONT  SCOOP_GPCR_PA17  /* Low */
-#define SPITZ_SCP2_BACKLIGHT_ON    SCOOP_GPCR_PA18  /* Low */
-#define SPITZ_SCP2_MIC_BIAS        SCOOP_GPCR_PA19  /* Low */
+/* Suspend States in comments
+ * Spitz only, Akita uses corresponding AKITA_IOEXP_ */
+#define SPITZ_SCP2_IR_ON	   SCOOP_GPCR_PA11  /* IrDA On, High */
+#define SPITZ_SCP2_AKIN_PULLUP	   SCOOP_GPCR_PA12  /* Pull-Up for Remote, Keep */
+#define SPITZ_SCP2_RESERVED_1	   SCOOP_GPCR_PA13  /* High */
+#define SPITZ_SCP2_RESERVED_2	   SCOOP_GPCR_PA14  /* Low */
+#define SPITZ_SCP2_RESERVED_3	   SCOOP_GPCR_PA15  /* Low */
+#define SPITZ_SCP2_RESERVED_4	   SCOOP_GPCR_PA16  /* Low */
+#define SPITZ_SCP2_BACKLIGHT_CONT  SCOOP_GPCR_PA17  /* Backlight Control, Low */
+#define SPITZ_SCP2_BACKLIGHT_ON	   SCOOP_GPCR_PA18  /* Backlight On, Low */
+#define SPITZ_SCP2_MIC_BIAS	   SCOOP_GPCR_PA19  /* Mic Bias On, Low */
 
 #define SPITZ_SCP2_IO_DIR (SPITZ_SCP2_IR_ON | SPITZ_SCP2_AKIN_PULLUP | SPITZ_SCP2_RESERVED_1 | \
-                           SPITZ_SCP2_RESERVED_2 | SPITZ_SCP2_RESERVED_3 | SPITZ_SCP2_RESERVED_4 | \
-                           SPITZ_SCP2_BACKLIGHT_CONT | SPITZ_SCP2_BACKLIGHT_ON | SPITZ_SCP2_MIC_BIAS)
+			   SPITZ_SCP2_RESERVED_2 | SPITZ_SCP2_RESERVED_3 | SPITZ_SCP2_RESERVED_4 | \
+			   SPITZ_SCP2_BACKLIGHT_CONT | SPITZ_SCP2_BACKLIGHT_ON | SPITZ_SCP2_MIC_BIAS)
 
 #define SPITZ_SCP2_IO_OUT   (SPITZ_SCP2_IR_ON | SPITZ_SCP2_AKIN_PULLUP | SPITZ_SCP2_RESERVED_1)
 #define SPITZ_SCP2_SUS_CLR  (SPITZ_SCP2_RESERVED_2 | SPITZ_SCP2_RESERVED_3 | SPITZ_SCP2_RESERVED_4 | \
-                             SPITZ_SCP2_BACKLIGHT_CONT | SPITZ_SCP2_BACKLIGHT_ON | SPITZ_SCP2_MIC_BIAS)
+			     SPITZ_SCP2_BACKLIGHT_CONT | SPITZ_SCP2_BACKLIGHT_ON | SPITZ_SCP2_MIC_BIAS)
 #define SPITZ_SCP2_SUS_SET  (SPITZ_SCP2_IR_ON | SPITZ_SCP2_RESERVED_1)
 
 
-/* Spitz IRQ Definitions */
+/* Spitz/Akita IRQ Definitions */
 
-#define SPITZ_IRQ_GPIO_KEY_INT        IRQ_GPIO(SPITZ_GPIO_KEY_INT)
-#define SPITZ_IRQ_GPIO_AC_IN          IRQ_GPIO(SPITZ_GPIO_AC_IN)
-#define SPITZ_IRQ_GPIO_AK_INT         IRQ_GPIO(SPITZ_GPIO_AK_INT)
-#define SPITZ_IRQ_GPIO_HP_IN          IRQ_GPIO(SPITZ_GPIO_HP_IN)
-#define SPITZ_IRQ_GPIO_TP_INT         IRQ_GPIO(SPITZ_GPIO_TP_INT)
-#define SPITZ_IRQ_GPIO_SYNC           IRQ_GPIO(SPITZ_GPIO_SYNC)
-#define SPITZ_IRQ_GPIO_ON_KEY         IRQ_GPIO(SPITZ_GPIO_ON_KEY)
-#define SPITZ_IRQ_GPIO_SWA            IRQ_GPIO(SPITZ_GPIO_SWA)
-#define SPITZ_IRQ_GPIO_SWB            IRQ_GPIO(SPITZ_GPIO_SWB)
+#define SPITZ_IRQ_GPIO_KEY_INT	      IRQ_GPIO(SPITZ_GPIO_KEY_INT)
+#define SPITZ_IRQ_GPIO_AC_IN	      IRQ_GPIO(SPITZ_GPIO_AC_IN)
+#define SPITZ_IRQ_GPIO_AK_INT	      IRQ_GPIO(SPITZ_GPIO_AK_INT)
+#define SPITZ_IRQ_GPIO_HP_IN	      IRQ_GPIO(SPITZ_GPIO_HP_IN)
+#define SPITZ_IRQ_GPIO_TP_INT	      IRQ_GPIO(SPITZ_GPIO_TP_INT)
+#define SPITZ_IRQ_GPIO_SYNC	      IRQ_GPIO(SPITZ_GPIO_SYNC)
+#define SPITZ_IRQ_GPIO_ON_KEY	      IRQ_GPIO(SPITZ_GPIO_ON_KEY)
+#define SPITZ_IRQ_GPIO_SWA	      IRQ_GPIO(SPITZ_GPIO_SWA)
+#define SPITZ_IRQ_GPIO_SWB	      IRQ_GPIO(SPITZ_GPIO_SWB)
 #define SPITZ_IRQ_GPIO_BAT_COVER      IRQ_GPIO(SPITZ_GPIO_BAT_COVER)
 #define SPITZ_IRQ_GPIO_FATAL_BAT      IRQ_GPIO(SPITZ_GPIO_FATAL_BAT)
-#define SPITZ_IRQ_GPIO_CO             IRQ_GPIO(SPITZ_GPIO_CO)
-#define SPITZ_IRQ_GPIO_CF_IRQ         IRQ_GPIO(SPITZ_GPIO_CF_IRQ)
-#define SPITZ_IRQ_GPIO_CF_CD          IRQ_GPIO(SPITZ_GPIO_CF_CD)
-#define SPITZ_IRQ_GPIO_CF2_IRQ        IRQ_GPIO(SPITZ_GPIO_CF2_IRQ)
-#define SPITZ_IRQ_GPIO_nSD_INT        IRQ_GPIO(SPITZ_GPIO_nSD_INT)
+#define SPITZ_IRQ_GPIO_CF_IRQ	      IRQ_GPIO(SPITZ_GPIO_CF_IRQ)
+#define SPITZ_IRQ_GPIO_CF_CD	      IRQ_GPIO(SPITZ_GPIO_CF_CD)
+#define SPITZ_IRQ_GPIO_CF2_IRQ	      IRQ_GPIO(SPITZ_GPIO_CF2_IRQ)
+#define SPITZ_IRQ_GPIO_nSD_INT	      IRQ_GPIO(SPITZ_GPIO_nSD_INT)
 #define SPITZ_IRQ_GPIO_nSD_DETECT     IRQ_GPIO(SPITZ_GPIO_nSD_DETECT)
 
 /*
@@ -156,3 +274,5 @@
 extern struct platform_device spitzscoop2_device;
 extern struct platform_device spitzssp_device;
 extern struct sharpsl_charger_machinfo spitz_pm_machinfo;
+
+#endif
Index: linux-2.6.24/sound/arm/pxa2xx-ac97.c
===================================================================
--- linux-2.6.24.orig/sound/arm/pxa2xx-ac97.c	2008-01-24 22:58:37.000000000 +0000
+++ linux-2.6.24/sound/arm/pxa2xx-ac97.c	2008-02-13 13:49:22.000000000 +0000
@@ -133,10 +133,10 @@
 #ifdef CONFIG_PXA27x
 		/* warm reset broken on Bulverde,
 		   so manually keep AC97 reset high */
-		pxa_gpio_mode(113 | GPIO_OUT | GPIO_DFLT_HIGH); 
+		pxa_gpio_mode(GPIO113_AC97_RESET_N | GPIO_OUT | GPIO_DFLT_HIGH); 
 		udelay(10);
 		GCR |= GCR_WARM_RST;
-		pxa_gpio_mode(113 | GPIO_ALT_FN_2_OUT);
+		pxa_gpio_mode(GPIO113_AC97_RESET_N_MD);
 		udelay(500);
 #else
 		GCR |= GCR_WARM_RST|GCR_PRIRDY_IEN|GCR_SECRDY_IEN;
@@ -335,7 +335,7 @@
 	pxa_gpio_mode(GPIO29_SDATA_IN_AC97_MD);
 #ifdef CONFIG_PXA27x
 	/* Use GPIO 113 as AC97 Reset on Bulverde */
-	pxa_gpio_mode(113 | GPIO_ALT_FN_2_OUT);
+	pxa_gpio_mode(GPIO113_AC97_RESET_N_MD);
 #endif
 	pxa_set_cken(CKEN_AC97, 1);