summaryrefslogtreecommitdiff
path: root/packages/uboot/u-boot-1.1.6/u-boot-1.1.6-fsl-1-Add-the-MPC832XEMDS-board-readme.patch
blob: b5e2a87b161c62d313168968fba249c66c7cc056 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
657bdd350516722e4d73329caf37aae694f7eaaa
diff --git a/doc/README.mpc832xemds b/doc/README.mpc832xemds
new file mode 100644
index 0000000..00c3af1
--- /dev/null
+++ b/doc/README.mpc832xemds
@@ -0,0 +1,124 @@
+Freescale MPC832XEMDS Board
+-----------------------------------------
+1. Board Switches and Jumpers
+1.0 There are five Dual-In-Line Packages(DIP) Switches on MPC832XE SYS board
+	For some reason, the HW designers describe the switch settings
+	in terms of 0 and 1, and then map that to physical switches where
+	the label "On" refers to logic 0 and "Off" is logic 1.
+
+	Switch bits are numbered 1 through, like, 4 6 8 or 10, but the
+	bits may contribute to signals that are numbered based at 0,
+	and some of those signals may be high-bit-number-0 too.  Heed
+	well the names and labels and do not get confused.
+
+		"Off" == 1
+		"On"  == 0
+
+	SW3 is switch 18 as silk-screened onto the board.
+	SW4[8] is the bit labled 8 on Switch 4.
+	SW5[1:6] refers to bits labeled 1 through 6 in order on switch 5.
+	SW6[7:1] refers to bits labeled 7 through 1 in order on switch 6.
+	SW7[1:8]= 0000_0001 refers to bits labeled 1 through 6 is set as "On"
+		and bits labeled 8 is set as "Off".
+
+1.1 For the MPC832XEMDS PROTO Board
+
+	First, make sure the board default setting is consistent with the
+	document shipped with your board. Then apply the following setting:
+	SW3[1-8]= 0000_1000  (core PLL setting, core enable)
+	SW4[1-8]= 0001_0010  (Flash boot on local bus, system PLL setting)
+	SW5[1-8]= 0010_0110  (Boot from high end)
+	SW6[1-8]= 0011_0100  (Flash boot on 16 bit local bus)
+	SW7[1-8]= 1000_0011  (QE PLL setting)
+
+	ENET3/4 MII mode settings:
+	J1 1-2 (ETH3_TXER)
+	J2 2-3 (MII mode)
+	J3 2-3 (MII mode)
+	J4 2-3 (ADSL clockOscillator)
+	J5 1-2 (ETH4_TXER)
+	J6 2-3 (ClockOscillator)
+	JP1 removed (don't force PORESET)
+	JP2 mounted (ETH4/2 MII)
+	JP3 mounted (ETH3 MII)
+	JP4 mounted (HRCW from BCSR)
+
+	ENET3/4 RMII mode settings:
+	J1 1-2 (ETH3_TXER)
+	J2 1-2 (RMII mode)
+	J3 1-2 (RMII mode)
+	J4 2-3 (ADSL clockOscillator)
+	J5 1-2 (ETH4_TXER)
+	J6 2-3 (ClockOscillator)
+	JP1 removed (don't force PORESET)
+	JP2 removed (ETH4/2 RMII)
+	JP3 removed (ETH3 RMII)
+	JP4 removed (HRCW from FLASH)
+
+	on board Oscillator: 66M
+
+
+2. Memory Map
+
+2.1 The memory map should look pretty much like this:
+
+	0x0000_0000	0x7fff_ffff	DDR			2G
+	0x8000_0000	0x8fff_ffff	PCI MEM prefetch	256M
+	0x9000_0000	0x9fff_ffff	PCI MEM non-prefetch	256M
+	0xc000_0000	0xdfff_ffff	Empty			512M
+	0xe000_0000	0xe01f_ffff	Int Mem Reg Space	2M
+	0xe020_0000	0xe02f_ffff	Empty			1M
+	0xe030_0000	0xe03f_ffff	PCI IO			1M
+	0xe040_0000	0xefff_ffff	Empty			252M
+	0xf400_0000	0xf7ff_ffff	Empty			64M
+	0xf800_0000	0xf800_7fff	BCSR on CS1		32K
+	0xf800_8000	0xf800_ffff	PIB CS2			32K
+	0xf801_0000	0xf801_7fff	PIB CS3			32K
+	0xfe00_0000	0xfeff_ffff	FLASH on CS0		16M
+
+
+3. Definitions
+
+3.1 Explanation of NEW definitions in:
+
+	include/configs/MPC832XEMDS.h
+
+    CONFIG_MPC83XX	MPC83XX family for MPC8349, MPC8360 and MPC832X
+    CONFIG_MPC832X	MPC832X specific
+    CONFIG_MPC832XEMDS	MPC832XEMDS board specific
+
+4. Compilation
+
+	Assuming you're using BASH shell:
+
+		export CROSS_COMPILE=your-cross-compile-prefix
+		cd u-boot
+		make distclean
+		make MPC832XEMDS_config
+		make
+
+	MPC832X support PCI 33MHz and PCI 66MHz, to make u-boot support PCI:
+
+		1)Make sure the DIP SW support PCI mode
+		  as described in Section 1.1.
+
+		2)To Make U-Boot image support PCI 33MHz, use
+			Make MPC832XEMDS_HOST_33_config
+
+		3)To Make U-Boot image support PCI 66MHz, use
+			Make MPC832XEMDS_HOST_66_config
+
+5. Downloading and Flashing Images
+
+5.0 Download over network:
+
+	tftp 20000 u-boot.bin
+
+5.1 Reflash U-boot Image using U-boot
+
+    If your current u-boot sets $filesize automatically:
+
+	protect off fe000000 +$filesize
+	erase fe000000 +$filesize
+	cp.b 20000 fe000000 $filesize
+