path: root/packages/linux/linux-turbostation/001_r1000.diff

Index: linux-2.6.20.1/drivers/net/Kconfig
===================================================================
--- linux-2.6.20.1.orig/drivers/net/Kconfig	2007-02-20 07:34:32.000000000 +0100
+++ linux-2.6.20.1/drivers/net/Kconfig	2007-02-28 20:29:04.000000000 +0100
@@ -2085,6 +2085,16 @@
 	  
 	  If in doubt, say Y.
 
+config R1000
+	tristate "Realtek 8169 gigabit ethernet support (R1000)"
+	depends on PCI
+	select CRC32
+	---help---
+	  Say Y here if you have a Realtek 8169 PCI Gigabit Ethernet adapter.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called r1000_n.  This is recommended.
+
 config SIS190
 	tristate "SiS190/SiS191 gigabit ethernet support"
 	depends on PCI
Index: linux-2.6.20.1/drivers/net/Makefile
===================================================================
--- linux-2.6.20.1.orig/drivers/net/Makefile	2007-02-20 07:34:32.000000000 +0100
+++ linux-2.6.20.1/drivers/net/Makefile	2007-02-28 20:29:04.000000000 +0100
@@ -188,6 +188,7 @@
 obj-$(CONFIG_NET_NETX) += netx-eth.o
 obj-$(CONFIG_DL2K) += dl2k.o
 obj-$(CONFIG_R8169) += r8169.o
+obj-$(CONFIG_R1000) += r1000_n.o r1000_ioctl.o
 obj-$(CONFIG_AMD8111_ETH) += amd8111e.o
 obj-$(CONFIG_IBMVETH) += ibmveth.o
 obj-$(CONFIG_S2IO) += s2io.o
Index: linux-2.6.20.1/drivers/net/r1000.h
===================================================================
--- /dev/null	1970-01-01 00:00:00.000000000 +0000
+++ linux-2.6.20.1/drivers/net/r1000.h	2007-02-28 20:29:04.000000000 +0100
@@ -0,0 +1,390 @@
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/delay.h>
+#include <linux/version.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/ethtool.h>
+#include <linux/mii.h>
+#include <asm/uaccess.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+
+#define R1000_VERSION "1.05"
+#define RELEASE_DATE "2006/10/25"
+#define MODULENAME "r1000"
+#define R1000_DRIVER_NAME MODULENAME R1000_VERSION ", the Linux device driver for Realtek Ethernet Controllers"
+#define PFX MODULENAME ": "
+
+
+#undef R1000_DEBUG
+#undef R1000_JUMBO_FRAME_SUPPORT
+//#undef	R1000_HW_FLOW_CONTROL_SUPPORT
+#define	R1000_HW_FLOW_CONTROL_SUPPORT
+
+
+#undef R1000_IOCTL_SUPPORT
+#define R1000_USE_IO
+
+#define R1000_BOTTOM_HALVES
+//#undef R1000_BOTTOM_HALVES
+
+#ifdef R1000_DEBUG
+	#define assert(expr) \
+        	if(!(expr)) { printk( "Assertion failed! %s,%s,%s,line=%d\n", #expr,__FILE__,__FUNCTION__,__LINE__); }
+	#define DBG_PRINT( fmt, args...)   printk("r1000: " fmt, ## args);
+#else
+	#define assert(expr) do {} while (0)
+	#define DBG_PRINT( fmt, args...)   ;
+#endif	// end of #ifdef R1000_DEBUG
+
+/* media options */
+#define MAX_UNITS 8
+
+#define OPTION_UNSET   -1
+#define OPTION_DISABLED 0
+#define OPTION_ENABLED  1
+
+/* MAC address length*/
+#define MAC_ADDR_LEN        6
+
+#define RX_FIFO_THRESH      7       /* 7 means NO threshold, Rx buffer level before first PCI xfer.  */
+#define RX_DMA_BURST        7       /* Maximum PCI burst, '6' is 1024 */
+#define TX_DMA_BURST        7       /* Maximum PCI burst, '6' is 1024 */
+#define ETTh                0x3F    /* 0x3F means NO threshold */
+
+#define ETH_HDR_LEN         14
+#define DEFAULT_MTU         1500
+#define DEFAULT_RX_BUF_LEN  1536
+
+
+#ifdef R1000_JUMBO_FRAME_SUPPORT
+#define MAX_JUMBO_FRAME_MTU	( 10000 )
+#define MAX_RX_SKBDATA_SIZE	( MAX_JUMBO_FRAME_MTU + ETH_HDR_LEN )
+#else
+//#define MAX_RX_SKBDATA_SIZE 1600
+#define MAX_RX_SKBDATA_SIZE 1608
+#endif //end #ifdef R1000_JUMBO_FRAME_SUPPORT
+
+
+#define InterFrameGap       0x03    /* 3 means InterFrameGap = the shortest one */
+
+#define NUM_TX_DESC         1024     /* Number of Tx descriptor registers*/
+#define NUM_RX_DESC         1024     /* Number of Rx descriptor registers*/
+
+#define RTL_MIN_IO_SIZE     0x80
+#define TX_TIMEOUT          (6*HZ)
+#define R1000_TIMER_EXPIRE_TIME 100 //100
+
+#ifdef R1000_USE_IO
+#define RTL_W8(reg, val8)   outb ((val8), ioaddr + (reg))
+#define RTL_W16(reg, val16) outw ((val16), ioaddr + (reg))
+#define RTL_W32(reg, val32) outl ((val32), ioaddr + (reg))
+#define RTL_R8(reg)         inb (ioaddr + (reg))
+#define RTL_R16(reg)        inw (ioaddr + (reg))
+#define RTL_R32(reg)        ((unsigned long) inl (ioaddr + (reg)))
+#else	//R1000_USE_IO
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,6)
+/* write/read MMIO register  for Linux kernel 2.4.x*/
+#define RTL_W8(reg, val8)   writeb ((val8), ioaddr + (reg))
+#define RTL_W16(reg, val16) writew ((val16), ioaddr + (reg))
+#define RTL_W32(reg, val32) writel ((val32), ioaddr + (reg))
+#define RTL_R8(reg)         readb (ioaddr + (reg))
+#define RTL_R16(reg)        readw (ioaddr + (reg))
+#define RTL_R32(reg)        ((unsigned long) readl (ioaddr + (reg)))
+#else
+/* write/read MMIO register  for Linux kernel 2.6.x*/
+#define RTL_W8(reg, val8)   iowrite8 ((val8), (void *)(ioaddr + (reg)))
+#define RTL_W16(reg, val16) iowrite16 ((val16), (void *)(ioaddr + (reg)))
+#define RTL_W32(reg, val32) iowrite32 ((val32), (void *)(ioaddr + (reg)))
+#define RTL_R8(reg)         ioread8 ((void *)(ioaddr + (reg)))
+#define RTL_R16(reg)        ioread16 ((void *)(ioaddr + (reg)))
+#define RTL_R32(reg)        ((unsigned long) ioread32 ((void *)(ioaddr + (reg))))
+#endif
+#endif	//R1000_USE_IO
+
+#define MCFG_METHOD_1		0x01
+#define MCFG_METHOD_2		0x02
+#define MCFG_METHOD_3		0x03
+#define MCFG_METHOD_4		0x04
+#define MCFG_METHOD_5		0x05
+#define MCFG_METHOD_11		0x0B
+#define MCFG_METHOD_12		0x0C
+#define MCFG_METHOD_13		0x0D
+#define MCFG_METHOD_14		0x0E
+#define MCFG_METHOD_15		0x0F
+
+#define PCFG_METHOD_1		0x01	//PHY Reg 0x03 bit0-3 == 0x0000
+#define PCFG_METHOD_2		0x02	//PHY Reg 0x03 bit0-3 == 0x0001
+#define PCFG_METHOD_3		0x03	//PHY Reg 0x03 bit0-3 == 0x0002
+
+enum pci_config_header_registers {
+	VID		= 0x00,
+	DID		= 0x02,
+	Command		= 0x04,
+	Status		= 0x06,
+	Rev_ID		= 0x08,
+	Class_Code	= 0x09,
+	Cache_Line_Size = 0x0C,
+	Latency_Timer	= 0x0D,
+	Header_type	= 0x0E,
+	BIST		= 0x0F,
+	IOAR		= 0x10,
+	MEMAR		= 0x14,
+	CIS_Pointer	= 0x28,
+	Sub_VID		= 0x2C,
+	Sub_DID		= 0x2E,
+	BMAR		= 0x30,
+	Interrupt_Line	= 0x3C,
+	Interrutp_Pin	= 0x3D,
+	Min_Gnt		= 0x3E,
+	Max_Lat		= 0x3F,
+};
+
+enum r1000_registers {
+	MAC0			= 0x00,
+	MAR0			= 0x08,
+	TxDescStartAddr		= 0x20,
+	TxHDescStartAddr	= 0x28,
+	FLASH			= 0x30,
+	ERSR			= 0x36,
+	ChipCmd			= 0x37,
+	TxPoll			= 0x38,
+	IntrMask		= 0x3C,
+	IntrStatus		= 0x3E,
+	TxConfig		= 0x40,
+	RxConfig		= 0x44,
+	TCTR			= 0x48,
+	RxMissed		= 0x4C,
+	Cfg9346			= 0x50,
+	Config0			= 0x51,
+	Config1			= 0x52,
+	Config2			= 0x53,
+	Config3			= 0x54,
+	Config4			= 0x55,
+	Config5			= 0x56,
+	TimerInt		= 0x58,
+	MultiIntr		= 0x5C,
+	PHYAR			= 0x60,
+	TBICSR			= 0x64,
+	TBI_ANAR		= 0x68,
+	TBI_LPAR		= 0x6A,
+	PHYstatus		= 0x6C,
+	Off7Ch			= 0x7C,
+	RxMaxSize		= 0xDA,
+	CPlusCmd 		= 0xE0,
+	RxDescStartAddr		= 0xE4,
+	ETThReg			= 0xEC,
+	FuncEvent		= 0xF0,
+	FuncEventMask		= 0xF4,
+	FuncPresetState		= 0xF8,
+	FuncForceEvent		= 0xFC,
+};
+
+enum r1000_register_content {
+	/*InterruptStatusBits*/
+	SYSErr		= 0x8000,
+	PCSTimeout	= 0x4000,
+	SWInt		= 0x0100,
+	TxDescUnavail	= 0x80,
+	RxFIFOOver	= 0x40,
+	LinkChg		= 0x20,
+	RxDescUnavail	= 0x10,
+	TxErr		= 0x08,
+	TxOK		= 0x04,
+	RxErr		= 0x02,
+	RxOK		= 0x01,
+
+	//TCTR/TimerInt contetn
+	CLK_tick	= 0x1770,	//for PCI clock=33MHz 0x1770=200usec
+
+	/*RxStatusDesc*/
+	RxRES		= 0x00200000,
+	RxCRC		= 0x00080000,
+	RxRUNT		= 0x00100000,
+	RxRWT		= 0x00400000,
+
+	/*ChipCmdBits*/
+	CmdReset	= 0x10,
+	CmdRxEnb	= 0x08,
+	CmdTxEnb	= 0x04,
+	RxBufEmpty	= 0x01,
+
+	/*Cfg9346Bits*/
+	Cfg9346_Lock	= 0x00,
+	Cfg9346_Unlock	= 0xC0,
+
+	/*rx_mode_bits*/
+	AcceptErr	= 0x20,
+	AcceptRunt	= 0x10,
+	AcceptBroadcast	= 0x08,
+	AcceptMulticast	= 0x04,
+	AcceptMyPhys	= 0x02,
+	AcceptAllPhys	= 0x01,
+
+	/*RxConfigBits*/
+	RxCfgFIFOShift	= 13,
+	RxCfgDMAShift	= 8,
+
+	/*TxConfigBits*/
+	TxInterFrameGapShift	= 24,
+	TxDMAShift		= 8,
+
+	//C+ Command Register
+	CPCR_MulRW_Enable	= 0x0008,
+
+	/*rtl8169_PHYstatus (MAC offset 0x6C)*/
+	TBI_Enable	= 0x80,
+	TxFlowCtrl	= 0x40,
+	RxFlowCtrl	= 0x20,
+	_1000Mbps	= 0x10,
+	_100Mbps	= 0x08,
+	_10Mbps		= 0x04,
+	LinkStatus	= 0x02,
+	FullDup		= 0x01,
+
+	/*GIGABIT_PHY_registers*/
+	PHY_CTRL_REG = 0,
+	PHY_STAT_REG = 1,
+	PHY_AUTO_NEGO_REG = 4,
+	PHY_1000_CTRL_REG = 9,
+
+	/*GIGABIT_PHY_REG_BIT*/
+	PHY_Restart_Auto_Nego	= 0x0200,
+	PHY_Enable_Auto_Nego	= 0x1000,
+
+	//PHY_STAT_REG = 1;
+	PHY_Auto_Neco_Comp	= 0x0020,
+
+	//PHY_AUTO_NEGO_REG = 4;
+	PHY_Cap_10_Half		= 0x0020,
+	PHY_Cap_10_Full		= 0x0040,
+	PHY_Cap_100_Half	= 0x0080,
+	PHY_Cap_100_Full	= 0x0100,
+
+	//PHY_1000_CTRL_REG = 9;
+	PHY_Cap_1000_Full	= 0x0200,
+	PHY_Cap_1000_Half	= 0x0100,
+
+	PHY_Cap_PAUSE		= 0x0400,
+	PHY_Cap_ASYM_PAUSE	= 0x0800,
+
+	PHY_Cap_Null		= 0x0,
+
+	/*_MediaType*/
+	_10_Half	= 0x01,
+	_10_Full	= 0x02,
+	_100_Half	= 0x04,
+	_100_Full	= 0x08,
+	_1000_Full	= 0x10,
+
+	/*_TBICSRBit*/
+	TBILinkOK 	= 0x02000000,
+};
+
+
+
+enum _DescStatusBit {
+	OWNbit	= 0x80000000,
+	EORbit	= 0x40000000,
+	FSbit	= 0x20000000,
+	LSbit	= 0x10000000,
+};
+
+
+struct TxDesc {
+	u32		status;
+	u32		vlan_tag;
+	u32		buf_addr;
+	u32		buf_Haddr;
+};
+
+struct RxDesc {
+	u32		status;
+	u32		vlan_tag;
+	u32		buf_addr;
+	u32		buf_Haddr;
+};
+
+#define r1000_request_timer( timer, timer_expires, timer_func, timer_data ) \
+{ \
+	init_timer(timer); \
+	timer->expires = (unsigned long)(jiffies + timer_expires); \
+	timer->data = (unsigned long)(timer_data); \
+	timer->function = (void *)(timer_func); \
+	add_timer(timer); \
+	DBG_PRINT("request_timer at 0x%08lx\n", (unsigned long)timer); \
+}
+
+#define r1000_delete_timer( del_timer_t ) \
+{ \
+	del_timer(del_timer_t); \
+	DBG_PRINT("delete_timer at 0x%08lx\n", (unsigned long)del_timer_t); \
+}
+
+#define r1000_mod_timer( timer, timer_expires ) \
+{ \
+	mod_timer( timer, jiffies + timer_expires ); \
+}
+
+typedef struct timer_list rt_timer_t;
+
+struct r1000_private {
+	unsigned long ioaddr;                /* memory map physical address*/
+	struct pci_dev *pci_dev;                /* Index of PCI device  */
+	struct net_device_stats stats;          /* statistics of net device */
+	spinlock_t lock;                        /* spin lock flag */
+	spinlock_t tx_lock;                     /* tx spin lock flag */
+	spinlock_t rx_lock;                     /* rx spin lock flag */
+	int chipset;
+	int mcfg;
+	int pcfg;
+	rt_timer_t r1000_timer;
+	unsigned long expire_time;
+
+#ifdef	R1000_BOTTOM_HALVES
+	struct tasklet_struct	r1000_rx_tasklet;
+	struct tasklet_struct	r1000_tx_tasklet;
+#endif	//R1000_BOTTOM_HALVES
+
+	unsigned int tx_cnt;
+
+	unsigned long phy_link_down_cnt;
+	unsigned long cur_rx;                   /* Index into the Rx descriptor buffer of next Rx pkt. */
+	unsigned long cur_tx;                   /* Index into the Tx descriptor buffer of next Rx pkt. */
+	unsigned long dirty_tx;
+	struct	TxDesc	*TxDescArray;           /* Index of 256-alignment Tx Descriptor buffer */
+	struct	RxDesc	*RxDescArray;           /* Index of 256-alignment Rx Descriptor buffer */
+	struct	sk_buff	*Tx_skbuff[NUM_TX_DESC];/* Index of Transmit data buffer */
+	struct	sk_buff	*Rx_skbuff[NUM_RX_DESC];/* Receive data buffer */
+	unsigned char   drvinit_fail;
+
+	dma_addr_t txdesc_array_dma_addr[NUM_TX_DESC];
+	dma_addr_t rxdesc_array_dma_addr[NUM_RX_DESC];
+	dma_addr_t rx_skbuff_dma_addr[NUM_RX_DESC];
+
+	void *txdesc_space;
+	dma_addr_t txdesc_phy_dma_addr;
+	int sizeof_txdesc_space;
+
+	void *rxdesc_space;
+	dma_addr_t rxdesc_phy_dma_addr;
+	int sizeof_rxdesc_space;
+
+	int curr_mtu_size;
+	int tx_pkt_len;
+	int rx_pkt_len;
+
+	int hw_rx_pkt_len;
+
+	u16	speed;
+	u8	duplex;
+	u8	autoneg;
+};
+
+
Index: linux-2.6.20.1/drivers/net/r1000_ioctl.c
===================================================================
--- /dev/null	1970-01-01 00:00:00.000000000 +0000
+++ linux-2.6.20.1/drivers/net/r1000_ioctl.c	2007-02-28 20:29:04.000000000 +0100
@@ -0,0 +1,129 @@
+#include "r1000.h"
+
+extern int R1000_READ_GMII_REG(unsigned long ioaddr, int RegAddr);
+extern int R1000_WRITE_GMII_REG(unsigned long ioaddr, int RegAddr, int value);
+extern int r1000_set_medium(struct net_device *netdev,u16 speed,u8 duplex,u8 autoneg);
+
+static int ethtool_get_settings(struct net_device *netdev,struct ethtool_cmd *ecmd){
+	struct r1000_private *priv = (struct r1000_private *)(netdev->priv);
+	unsigned long ioaddr = priv->ioaddr;
+	unsigned int bmcr = R1000_READ_GMII_REG(ioaddr,PHY_STAT_REG);
+	unsigned int bmsr = R1000_READ_GMII_REG(ioaddr,PHY_AUTO_NEGO_REG);
+	unsigned int gbcr = R1000_READ_GMII_REG(ioaddr,PHY_1000_CTRL_REG);
+
+	ecmd->supported = (SUPPORTED_10baseT_Half|
+		SUPPORTED_10baseT_Full|
+		SUPPORTED_100baseT_Half|
+		SUPPORTED_100baseT_Full|
+		SUPPORTED_1000baseT_Full|
+		SUPPORTED_Autoneg|
+		SUPPORTED_TP);
+
+	ecmd->advertising = ADVERTISED_TP;
+
+	if(bmsr&ADVERTISE_10HALF)
+		ecmd->advertising |= ADVERTISED_10baseT_Half;
+	if(bmsr&ADVERTISE_10FULL)
+		ecmd->advertising |= ADVERTISED_10baseT_Full;
+	if(bmsr&ADVERTISE_100HALF)
+		ecmd->advertising |= ADVERTISED_100baseT_Half;
+	if(bmsr&ADVERTISE_100FULL)
+		ecmd->advertising |= ADVERTISED_100baseT_Full;
+	if(gbcr&PHY_Cap_1000_Full)
+		ecmd->advertising |= ADVERTISED_1000baseT_Full;
+	if(bmcr&PHY_Enable_Auto_Nego)
+		ecmd->advertising |= ADVERTISED_Autoneg;
+
+	ecmd->port = PORT_TP;
+
+	if(priv->mcfg == MCFG_METHOD_1)
+		ecmd->transceiver = XCVR_EXTERNAL;
+	else
+		ecmd->transceiver = XCVR_INTERNAL;
+
+	if(RTL_R8(PHYstatus)&LinkStatus){
+		if(RTL_R8(PHYstatus)&_1000Mbps)
+			ecmd->speed = SPEED_1000;
+		else if(RTL_R8(PHYstatus)&_100Mbps)
+			ecmd->speed = SPEED_100;
+		else if(RTL_R8(PHYstatus)&_10Mbps)
+			ecmd->speed = SPEED_10;
+
+		if(RTL_R8(PHYstatus)&FullDup)
+			ecmd->duplex = DUPLEX_FULL;
+		else
+			ecmd->duplex = DUPLEX_HALF;
+
+	}else{
+		ecmd->speed = -1;
+		ecmd->duplex = -1;
+	}
+	ecmd->autoneg = AUTONEG_ENABLE;
+	return 0;
+}
+
+static int ethtool_set_settings(struct net_device *netdev,struct ethtool_cmd *ecmd){
+	return r1000_set_medium(netdev,ecmd->speed,ecmd->duplex,ecmd->autoneg);
+}
+
+static void ethtool_get_drvinfo(struct net_device *netdev,struct ethtool_drvinfo *drvinfo){
+	struct r1000_private *priv = netdev_priv(netdev);
+
+	strncpy(drvinfo->driver, MODULENAME,32);
+	strncpy(drvinfo->version, R1000_VERSION,32);
+	strncpy(drvinfo->fw_version, "N/A", 32);
+	strncpy(drvinfo->bus_info, pci_name(priv->pci_dev), 32);
+}
+
+static int ethtool_nway_reset(struct net_device *netdev){
+//	struct r1000_private *priv = netdev_priv(netdev);
+
+	if(netif_running(netdev)){
+	}
+
+	return 0;
+}
+
+uint32_t ethtool_get_link(struct net_device *netdev){
+	return netif_carrier_ok(netdev) ? 1 : 0;
+}
+
+int ethtool_ioctl(struct ifreq *ifr){
+	struct net_device *netdev=__dev_get_by_name(ifr->ifr_name);
+	void *useraddr=(void *)ifr->ifr_data;
+	uint32_t ethcmd;
+
+	if(!capable(CAP_NET_ADMIN))
+		return -EPERM;
+
+	if(!netdev || !netif_device_present(netdev))
+		return -ENODEV;
+	if(copy_from_user(&ethcmd, useraddr, sizeof(ethcmd)))
+		return -EFAULT;
+
+	switch (ethcmd){
+	case ETHTOOL_GSET:
+		return ethtool_get_settings(netdev,useraddr);
+	case ETHTOOL_SSET:
+		return ethtool_set_settings(netdev,useraddr);
+	case ETHTOOL_GDRVINFO:
+		ethtool_get_drvinfo(netdev,useraddr);
+	case ETHTOOL_NWAY_RST:
+		return ethtool_nway_reset(netdev);
+	case ETHTOOL_GLINK:
+		return ethtool_get_link(netdev);
+	default:
+		return -EOPNOTSUPP;
+	}
+	return -EOPNOTSUPP;
+}
+
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
+struct ethtool_ops r1000_ethtool_ops = {
+	.get_settings	= ethtool_get_settings,
+	.set_settings	= ethtool_set_settings,
+	.get_drvinfo	= ethtool_get_drvinfo,
+	.nway_reset	= ethtool_nway_reset,
+	.get_link	= ethtool_get_link,
+};
+#endif
Index: linux-2.6.20.1/drivers/net/r1000_n.c
===================================================================
--- /dev/null	1970-01-01 00:00:00.000000000 +0000
+++ linux-2.6.20.1/drivers/net/r1000_n.c	2007-02-28 20:29:04.000000000 +0100
@@ -0,0 +1,1767 @@
+//=========================================================================
+//Realtek Ethernet driver for Linux kernel 2.4.x. and 2.6.x
+//=========================================================================
+
+#include "r1000.h"
+
+#ifdef MODULE_PARM
+static int speed[MAX_UNITS] = {-1,-1,-1,-1,-1,-1,-1,-1};
+
+static int duplex[MAX_UNITS] = {-1,-1,-1,-1,-1,-1,-1,-1};
+
+static int autoneg[MAX_UNITS] = {-1,-1,-1,-1,-1,-1,-1,-1};
+#endif //MODULE_PARM
+
+/* Maximum events (Rx packets, etc.) to handle at each interrupt. */
+static int max_interrupt_work = 20;
+
+/* Maximum number of multicast addresses to filter (vs. Rx-all-multicast).
+   The RTL chips use a 64 element hash table based on the Ethernet CRC.  */
+static int multicast_filter_limit = 32;
+
+const static struct {
+	const char *name;
+	u8 mcfg;		 /* depend on documents of Realtek */
+	u32 RxConfigMask; 	/* should clear the bits supported by this chip */
+} rtl_chip_info[] = {
+	{ "RTL8169",  MCFG_METHOD_1,  0xff7e1880 },
+	{ "RTL8169S/8110S",  MCFG_METHOD_2,  0xff7e1880 },
+	{ "RTL8169S/8110S",  MCFG_METHOD_3,  0xff7e1880 },
+	{ "RTL8169SB/8110SB",  MCFG_METHOD_4,  0xff7e1880 },
+	{ "RTL8110SC",  MCFG_METHOD_5,  0xff7e1880 },
+	{ "RTL8168B/8111B",  MCFG_METHOD_11,  0xff7e1880 },
+	{ "RTL8168B/8111B",  MCFG_METHOD_12,  0xff7e1880 },
+	{ "RTL8101E",  MCFG_METHOD_13,  0xff7e1880 },
+	{ "RTL8100E",  MCFG_METHOD_14,  0xff7e1880 },
+	{ "RTL8100E",  MCFG_METHOD_15,  0xff7e1880 },
+	{ 0 }
+};
+
+
+static struct pci_device_id r1000_pci_tbl[] __devinitdata = {
+	{ 0x10ec, 0x8169, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
+	{ 0x10ec, 0x8167, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
+	{ 0x10ec, 0x8168, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
+	{ 0x10ec, 0x8136, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
+	{0,}
+};
+
+
+MODULE_DEVICE_TABLE (pci, r1000_pci_tbl);
+MODULE_AUTHOR ("Realtek");
+MODULE_DESCRIPTION ("Linux device driver for Realtek Ethernet Controllers");
+
+#ifdef MODULE_PARM
+MODULE_PARM (speed, "1-" __MODULE_STRING(MAX_UNITS) "i");
+MODULE_PARM_DESC(speed,"Link speed");
+MODULE_PARM (duplex, "1-" __MODULE_STRING(MAX_UNITS) "i");
+MODULE_PARM_DESC(duplex,"Link duplex");
+MODULE_PARM (autoneg, "1-" __MODULE_STRING(MAX_UNITS) "i");
+MODULE_PARM_DESC(autoneg,"Autonegotiation");
+#else //MODULE_PARM
+/* Module Parameters are always initialized to -1, so that the driver
+ * can tell the difference between no user specified value or the
+ * user asking for the default value.
+ * The true default values are loaded in when e1000_check_options is called.
+ *
+ * This is a GCC extension to ANSI C.
+ * See the item "Labeled Elements in Initializers" in the section
+ * "Extensions to the C Language Family" of the GCC documentation.
+ */
+#define R1000_PARAM_INIT { [0 ... MAX_UNITS] = OPTION_UNSET }
+/* All parameters are treated the same, as an integer array of values.
+ * This macro just reduces the need to repeat the same declaration code
+ * over and over (plus this helps to avoid typo bugs).
+ */
+#define R1000_PARAM(X, S) \
+	static int __devinitdata X[MAX_UNITS+1] = R1000_PARAM_INIT; \
+	static int num_##X = 0; \
+	module_param_array(X, int, &num_##X, 0); \
+	MODULE_PARM_DESC(X, S);
+/* Link Speed
+ * Valid Values: 10Mbps, 100Mbps, and 1000Mbps
+ * Defaule value: 100Mbps 
+ */
+R1000_PARAM(speed, "Link speed");
+/* Link duplex
+ * Valid Values: half duplex and full duplex
+ * Defaule value: full duplex
+ */
+R1000_PARAM(duplex, "Link duplex");
+/* Autonegotiation
+ * Valid Values: enable and disable
+ * Defaule value: enable
+ */
+R1000_PARAM(autoneg, "Autonegotiation");
+#endif //MODULE_PARM
+
+MODULE_LICENSE("GPL");
+
+
+static int r1000_open (struct net_device *netdev);
+static int r1000_start_xmit (struct sk_buff *skb, struct net_device *netdev);
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
+//typedef	int				irqreturn_t;
+#define	IRQ_NONE		0
+#define	IRQ_HANDLED		1
+static void r1000_interrupt (int irq, void *dev_instance, struct pt_regs *regs);
+#else
+static irqreturn_t r1000_interrupt (int irq, void *dev_instance, struct pt_regs *regs);
+#endif
+
+static void r1000_init_ring (struct net_device *netdev);
+static void r1000_hw_start (struct net_device *netdev);
+static int r1000_close (struct net_device *netdev);
+static inline u32 ether_crc (int length, unsigned char *data);
+static void r1000_set_rx_mode (struct net_device *netdev);
+static void r1000_tx_timeout (struct net_device *netdev);
+static struct net_device_stats *r1000_get_stats(struct net_device *netdev);
+
+#ifdef R1000_JUMBO_FRAME_SUPPORT
+static int r1000_change_mtu(struct net_device *netdev, int new_mtu);
+#endif //end #ifdef R1000_JUMBO_FRAME_SUPPORT
+
+static void r1000_hw_PHY_config (struct net_device *netdev);
+static void r1000_hw_PHY_reset(struct net_device *netdev);
+//static const u16 r1000_intr_mask=LinkChg|RxDescUnavail|RxFIFOOver|TxErr|TxOK|RxErr|RxOK;
+static const u16 r1000_intr_mask=LinkChg|RxDescUnavail|TxErr|TxOK|RxErr|RxOK;
+static const unsigned int r1000_rx_config=(RX_FIFO_THRESH<<RxCfgFIFOShift)|(RX_DMA_BURST<<RxCfgDMAShift)|0x0000000E;
+
+static int r1000_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd);
+extern int ethtool_ioctl(struct ifreq *ifr);
+extern struct ethtool_ops r1000_ethtool_ops;
+static int r1000_set_speed_duplex(unsigned long ioaddr, unsigned int anar, unsigned int gbcr, unsigned int bmcr);
+
+static void r1000_rx_action(struct net_device *netdev);
+static void r1000_tx_action(struct net_device *netdev);
+
+#ifdef	R1000_BOTTOM_HALVES
+static void r1000_rx_interrupt(unsigned long ndev);
+static void r1000_tx_interrupt(unsigned long ndev);
+#else
+static void r1000_rx_interrupt(struct net_device *netdev, struct r1000_private *priv, unsigned long ioaddr);
+static void r1000_tx_interrupt (struct net_device *netdev, struct r1000_private *priv, unsigned long ioaddr);
+#endif	//R1000_BOTTOM_HALVES
+
+
+
+#ifdef R1000_DEBUG
+unsigned alloc_rxskb_cnt = 0;
+#define R1000_ALLOC_RXSKB(bufsize) 	dev_alloc_skb(bufsize); alloc_rxskb_cnt ++ ;
+#define R1000_FREE_RXSKB(skb) 	kfree_skb(skb); alloc_rxskb_cnt -- ;
+#define R1000_NETIF_RX(skb) 		netif_rx(skb); alloc_rxskb_cnt -- ;
+#else
+#define R1000_ALLOC_RXSKB(bufsize) 	dev_alloc_skb(bufsize);
+#define R1000_FREE_RXSKB(skb) 	kfree_skb(skb);
+#define R1000_NETIF_RX(skb) 		netif_rx(skb);
+#endif //end #ifdef R1000_DEBUG
+
+
+//=================================================================
+//	PHYAR
+//	bit		Symbol
+//	31		Flag
+//	30-21	reserved
+//	20-16	5-bit GMII/MII register address
+//	15-0	16-bit GMII/MII register data
+//=================================================================
+void R1000_WRITE_GMII_REG( unsigned long ioaddr, int RegAddr, int value )
+{
+	int	i;
+
+	RTL_W32 ( PHYAR, 0x80000000 | (RegAddr&0xFF)<<16 | value);
+	udelay(1000);
+
+	for( i = 2000; i > 0 ; i -- ){
+		// Check if the RTL8169 has completed writing to the specified MII register
+		if( ! (RTL_R32(PHYAR)&0x80000000) ){
+			break;
+		}
+		else{
+			udelay(100);
+		}// end of if( ! (RTL_R32(PHYAR)&0x80000000) )
+	}// end of for() loop
+}
+//=================================================================
+int R1000_READ_GMII_REG( unsigned long ioaddr, int RegAddr )
+{
+	int i, value = -1;
+
+	RTL_W32 ( PHYAR, 0x0 | (RegAddr&0xFF)<<16 );
+	udelay(1000);
+
+	for( i = 2000; i > 0 ; i -- ){
+		// Check if the RTL8169 has completed retrieving data from the specified MII register
+		if( RTL_R32(PHYAR) & 0x80000000 ){
+			value = (int)( RTL_R32(PHYAR)&0xFFFF );
+			break;
+		}
+		else{
+			udelay(100);
+		}// end of if( RTL_R32(PHYAR) & 0x80000000 )
+	}// end of for() loop
+	return value;
+}
+
+void r1000_phy_timer_t_handler( void	*timer_data )
+{
+	struct net_device *netdev = (struct net_device *)timer_data;
+	struct r1000_private *priv = (struct r1000_private *) (netdev->priv);
+	unsigned long ioaddr = priv->ioaddr;
+
+	assert( priv->mcfg > MCFG_METHOD_1 );
+	assert( priv->pcfg < PCFG_METHOD_3 );
+
+	if( RTL_R8(PHYstatus) & LinkStatus ){
+		priv->phy_link_down_cnt = 0 ;
+	}
+	else{
+		priv->phy_link_down_cnt ++ ;
+		if( priv->phy_link_down_cnt >= 12 ){
+			// If link on 1000, perform phy reset.
+			if( R1000_READ_GMII_REG( ioaddr, PHY_1000_CTRL_REG ) & PHY_Cap_1000_Full )
+			{
+				DBG_PRINT("r1000_hw_PHY_reset\n");
+				r1000_hw_PHY_reset(netdev);
+			}
+
+			priv->phy_link_down_cnt = 0 ;
+		}
+	}
+
+	//---------------------------------------------------------------------------
+	//mod_timer is a more efficient way to update the expire field of an active timer.
+	//---------------------------------------------------------------------------
+//	r1000_mod_timer( (&priv->phy_timer_t), 100 );
+}
+
+void r1000_timer_handler( void *timer_data )
+{
+	struct net_device *netdev = (struct net_device *)timer_data;
+	struct r1000_private *priv = (struct r1000_private *) (netdev->priv);
+
+	if( (priv->mcfg > MCFG_METHOD_1) && (priv->pcfg < PCFG_METHOD_3) ){
+		DBG_PRINT("FIX PCS -> r1000_phy_timer_t_handler\n");
+		priv->phy_link_down_cnt = 0;
+		r1000_phy_timer_t_handler( timer_data );
+	}
+
+	r1000_mod_timer( (&priv->r1000_timer), priv->expire_time );
+}
+
+static int r1000_set_speed_duplex(unsigned long ioaddr, unsigned int anar, unsigned int gbcr, unsigned int bmcr){
+	unsigned int i = 0;
+	unsigned int bmsr;
+
+	R1000_WRITE_GMII_REG(ioaddr,PHY_AUTO_NEGO_REG,anar);
+	R1000_WRITE_GMII_REG(ioaddr,PHY_1000_CTRL_REG,gbcr);
+	R1000_WRITE_GMII_REG(ioaddr,PHY_CTRL_REG,bmcr);
+
+	for(i=0;i<10000;i++){
+		bmsr = R1000_READ_GMII_REG(ioaddr,PHY_STAT_REG);
+		if(bmsr&PHY_Auto_Neco_Comp)
+			return 0;
+	}
+	return -1;	
+}
+
+static int __devinit r1000_init_board ( struct pci_dev *pdev, struct net_device **netdev_out, unsigned long *ioaddr_out)
+{
+	unsigned long ioaddr = 0;
+	struct net_device *netdev;
+	struct r1000_private *priv;
+	int rc, i;
+#ifndef R1000_USE_IO
+	unsigned long mmio_start, mmio_end, mmio_flags, mmio_len;
+#endif
+
+	assert (pdev != NULL);
+	assert (ioaddr_out != NULL);
+
+	*ioaddr_out = 0;
+	*netdev_out = NULL;
+
+	// dev zeroed in init_etherdev
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,3,0)
+	netdev = init_etherdev (NULL, sizeof (*priv));
+#else
+	netdev = alloc_etherdev (sizeof (*priv));
+#endif
+
+	if (netdev == NULL) {
+		printk (KERN_ERR PFX "unable to alloc new ethernet\n");
+		return -ENOMEM;
+	}
+
+	SET_MODULE_OWNER(netdev);
+
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
+	SET_NETDEV_DEV(netdev, &pdev->dev);
+#endif
+
+	priv = netdev->priv;
+
+	// enable device (incl. PCI PM wakeup and hotplug setup)
+	rc = pci_enable_device (pdev);
+	if (rc)
+		goto err_out;
+
+#ifndef R1000_USE_IO
+	mmio_start = pci_resource_start (pdev, 1);
+	mmio_end = pci_resource_end (pdev, 1);
+	mmio_flags = pci_resource_flags (pdev, 1);
+	mmio_len = pci_resource_len (pdev, 1);
+
+	// make sure PCI base addr 1 is MMIO
+	if (!(mmio_flags & IORESOURCE_MEM)) {
+		printk (KERN_ERR PFX "region #1 not an MMIO resource, aborting\n");
+		rc = -ENODEV;
+		goto err_out;
+	}
+
+	// check for weird/broken PCI region reporting
+	if ( mmio_len < RTL_MIN_IO_SIZE ) {
+		printk (KERN_ERR PFX "Invalid PCI region size(s), aborting\n");
+		rc = -ENODEV;
+		goto err_out;
+	}
+#endif
+
+	rc = pci_request_regions (pdev, netdev->name);
+	if (rc)
+		goto err_out;
+
+	// enable PCI bus-mastering
+	pci_set_master (pdev);
+
+#ifdef R1000_USE_IO
+	ioaddr = pci_resource_start(pdev, 0);
+#else
+	// ioremap MMIO region
+	ioaddr = (unsigned long)ioremap (mmio_start, mmio_len);
+	if (ioaddr == 0) {
+		printk (KERN_ERR PFX "cannot remap MMIO, aborting\n");
+		rc = -EIO;
+		goto err_out_free_res;
+	}
+#endif
+
+	// Soft reset the chip.
+	RTL_W8 ( ChipCmd, CmdReset);
+
+	// Check that the chip has finished the reset.
+	for (i = 1000; i > 0; i--){
+		if ( (RTL_R8(ChipCmd) & CmdReset) == 0){
+			break;
+		}
+		else{
+			udelay (10);
+		}
+	}
+
+	// identify config method
+	{
+		unsigned long val32 = (RTL_R32(TxConfig)&0x7c800000);
+
+		if( val32 == 0x38800000)
+			priv->mcfg = MCFG_METHOD_15;
+		else if( val32 == 0x30800000)
+			priv->mcfg = MCFG_METHOD_14;
+		else if( val32 == 0x34000000)
+			priv->mcfg = MCFG_METHOD_13;
+		else if( val32 == 0x38000000)
+			priv->mcfg = MCFG_METHOD_12;
+		else if( val32 == 0x30000000)
+			priv->mcfg = MCFG_METHOD_11;
+		else if( val32 == 0x18000000)
+			priv->mcfg = MCFG_METHOD_5;
+		else if( val32 == 0x10000000 )
+			priv->mcfg = MCFG_METHOD_4;
+		else if( val32 == 0x04000000 )
+			priv->mcfg = MCFG_METHOD_3;
+		else if( val32 == 0x00800000 )
+			priv->mcfg = MCFG_METHOD_2;
+		else if( val32 == 0x00000000 )
+			priv->mcfg = MCFG_METHOD_1;
+		else
+			priv->mcfg = MCFG_METHOD_1;
+	}
+	{
+		unsigned char val8 = (unsigned char)(R1000_READ_GMII_REG(ioaddr,3)&0x000f);
+		if( val8 == 0x00 ){
+			priv->pcfg = PCFG_METHOD_1;
+		}
+		else if( val8 == 0x01 ){
+			priv->pcfg = PCFG_METHOD_2;
+		}
+		else if( val8 == 0x02 ){
+			priv->pcfg = PCFG_METHOD_3;
+		}
+		else{
+			priv->pcfg = PCFG_METHOD_3;
+		}
+	}
+
+
+	for (i = ARRAY_SIZE (rtl_chip_info) - 1; i >= 0; i--){
+		if (priv->mcfg == rtl_chip_info[i].mcfg) {
+			priv->chipset = i;
+			goto match;
+		}
+	}
+
+	//if unknown chip, assume array element #0, original RTL-8169 in this case
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,10)
+	printk (KERN_DEBUG PFX "PCI device %s: unknown chip version, assuming RTL-8169\n", pdev->slot_name);
+#endif
+	priv->chipset = 0;
+
+match:
+	*ioaddr_out = ioaddr;
+	*netdev_out = netdev;
+	return 0;
+
+#ifndef R1000_USE_IO
+err_out_free_res:
+	pci_release_regions (pdev);
+#endif
+
+err_out:
+	unregister_netdev(netdev);
+	kfree(netdev);
+	return rc;
+}
+
+int r1000_set_medium(struct net_device *netdev,u16 speed,u8 duplex,u8 autoneg){
+	struct r1000_private *priv = (struct r1000_private *)(netdev->priv);
+	unsigned long ioaddr = priv->ioaddr;
+	unsigned int anar=0,gbcr=0,bmcr=0,ret=0,val=0;
+
+	val = R1000_READ_GMII_REG( ioaddr, PHY_AUTO_NEGO_REG );
+#ifdef R1000_HW_FLOW_CONTROL_SUPPORT
+	val |= PHY_Cap_PAUSE | PHY_Cap_ASYM_PAUSE ;
+#endif //end #define R1000_HW_FLOW_CONTROL_SUPPORT
+
+	bmcr = PHY_Restart_Auto_Nego|PHY_Enable_Auto_Nego;
+
+	if(autoneg==AUTONEG_ENABLE){
+		priv->autoneg = AUTONEG_ENABLE;
+		anar = PHY_Cap_10_Half|PHY_Cap_10_Full|PHY_Cap_100_Half|PHY_Cap_100_Full;
+		gbcr = PHY_Cap_1000_Half|PHY_Cap_1000_Full;
+	}else{
+		priv->autoneg = AUTONEG_DISABLE;
+		if(speed==SPEED_1000){
+			priv->speed = SPEED_1000;
+			priv->duplex = DUPLEX_FULL;
+
+			anar = PHY_Cap_10_Half|PHY_Cap_10_Full|PHY_Cap_100_Half|PHY_Cap_100_Full;
+			if((priv->mcfg==MCFG_METHOD_13)||(priv->mcfg==MCFG_METHOD_14)||(priv->mcfg==MCFG_METHOD_15))
+				gbcr = PHY_Cap_Null;
+			else
+				gbcr = PHY_Cap_1000_Half|PHY_Cap_1000_Full;
+		}else if((speed==SPEED_100)&&(duplex==DUPLEX_FULL)){
+			priv->speed = SPEED_100;
+			priv->duplex = DUPLEX_FULL;
+
+			anar = PHY_Cap_10_Half|PHY_Cap_10_Full|PHY_Cap_100_Half|PHY_Cap_100_Full;
+			gbcr = PHY_Cap_Null;
+		}else if((speed==SPEED_100)&&(duplex==DUPLEX_HALF)){
+			priv->speed = SPEED_100;
+			priv->duplex = DUPLEX_HALF;
+
+			anar = PHY_Cap_10_Half|PHY_Cap_10_Full|PHY_Cap_100_Half;
+			gbcr = PHY_Cap_Null;
+		}else if((speed==SPEED_10)&&(duplex==DUPLEX_FULL)){
+			priv->speed = SPEED_10;
+			priv->duplex = DUPLEX_FULL;
+
+			anar = PHY_Cap_10_Half|PHY_Cap_10_Full;
+			gbcr = PHY_Cap_Null;
+		}else if((speed==SPEED_10)&&(duplex==DUPLEX_HALF)){
+			priv->speed = SPEED_10;
+			priv->duplex = DUPLEX_HALF;
+
+			anar = PHY_Cap_10_Half;
+			gbcr = PHY_Cap_Null;
+		}else{
+			priv->speed = SPEED_100;
+			priv->duplex = DUPLEX_FULL;
+
+			anar = PHY_Cap_10_Half|PHY_Cap_10_Full|PHY_Cap_100_Half|PHY_Cap_100_Full;
+			gbcr = PHY_Cap_Null;
+		}
+	}
+
+	//enable flow control
+	anar |=  val&0xC1F;
+
+	ret = r1000_set_speed_duplex(ioaddr,anar,gbcr,bmcr);
+	
+	return	ret;
+}
+
+
+static int r1000_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd){
+
+	if(!netif_running(netdev))
+		return -EINVAL;
+
+	switch(cmd){
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
+	case SIOCETHTOOL:
+		return ethtool_ioctl(ifr);
+#endif
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+
+
+
+
+//======================================================================================================
+static int __devinit r1000_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+	struct net_device *netdev = NULL;
+	struct r1000_private *priv = NULL;
+	unsigned long ioaddr = 0;
+	static int board_idx = -1;
+	int i,rc;
+//	int val=0;
+	int speed_opt = SPEED_100;
+	int duplex_opt = DUPLEX_FULL;
+	int autoneg_opt = AUTONEG_ENABLE;
+
+
+	assert (pdev != NULL);
+	assert (ent != NULL);
+
+	board_idx++;
+
+
+	i = r1000_init_board (pdev, &netdev, &ioaddr);
+	if (i < 0) {
+		return i;
+	}
+
+	priv = netdev->priv;
+
+	assert (ioaddr != NULL);
+	assert (netdev != NULL);
+	assert (priv != NULL);
+
+	// Get MAC address //
+	for (i = 0; i < MAC_ADDR_LEN ; i++){
+		netdev->dev_addr[i] = RTL_R8( MAC0 + i );
+	}
+
+	netdev->open		= r1000_open;
+	netdev->hard_start_xmit	= r1000_start_xmit;
+	netdev->get_stats    	= r1000_get_stats;
+	netdev->stop 		= r1000_close;
+	netdev->tx_timeout 	= r1000_tx_timeout;
+	netdev->set_multicast_list = r1000_set_rx_mode;
+	netdev->watchdog_timeo 	= TX_TIMEOUT;
+	netdev->irq 		= pdev->irq;
+	netdev->base_addr 	= (unsigned long) ioaddr;
+
+#ifdef R1000_JUMBO_FRAME_SUPPORT
+	netdev->change_mtu	= r1000_change_mtu;
+#endif //end #ifdef R1000_JUMBO_FRAME_SUPPORT
+
+	netdev->do_ioctl 	= r1000_ioctl;
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
+	netdev->ethtool_ops	= &r1000_ethtool_ops;
+#endif
+
+#ifdef	R1000_BOTTOM_HALVES
+	tasklet_init(&priv->r1000_rx_tasklet,r1000_rx_interrupt,(unsigned long)netdev);
+	tasklet_init(&priv->r1000_tx_tasklet,r1000_tx_interrupt,(unsigned long)netdev);
+#endif	//R1000_BOTTOM_HALVES
+
+
+	priv		= netdev->priv;			// private data //
+	priv->pci_dev 	= pdev;
+	priv->ioaddr 	= ioaddr;
+
+//#ifdef R1000_JUMBO_FRAME_SUPPORT
+	priv->curr_mtu_size = netdev->mtu;
+	priv->tx_pkt_len = netdev->mtu + ETH_HDR_LEN;
+	priv->rx_pkt_len = netdev->mtu + ETH_HDR_LEN;
+	priv->hw_rx_pkt_len = priv->rx_pkt_len + 8;
+//#endif //end #ifdef R1000_JUMBO_FRAME_SUPPORT
+
+	DBG_PRINT("-------------------------- \n");
+	DBG_PRINT("netdev->mtu = %d \n", netdev->mtu);
+	DBG_PRINT("priv->curr_mtu_size = %d \n", priv->curr_mtu_size);
+	DBG_PRINT("priv->tx_pkt_len = %d \n", priv->tx_pkt_len);
+	DBG_PRINT("priv->rx_pkt_len = %d \n", priv->rx_pkt_len);
+	DBG_PRINT("priv->hw_rx_pkt_len = %d \n", priv->hw_rx_pkt_len);
+	DBG_PRINT("-------------------------- \n");
+
+	spin_lock_init(&priv->lock);
+	spin_lock_init(&priv->tx_lock);
+	spin_lock_init(&priv->rx_lock);
+
+	rc = register_netdev(netdev);
+	if(rc){
+#ifndef R1000_USE_IO
+		iounmap ((void *)(netdev->base_addr));
+#endif
+		pci_release_regions(pdev);
+		pci_disable_device(pdev);
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
+		kfree(netdev);
+#else
+		free_netdev(netdev);
+#endif
+		return rc;
+	}
+
+	pci_set_drvdata(pdev,netdev);     //      pdev->driver_data = data;
+
+
+	printk (KERN_DEBUG "%s: Identified chip type is '%s'.\n",netdev->name,rtl_chip_info[priv->chipset].name);
+	printk (KERN_INFO "%s: %s at 0x%lx, "
+				"%2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x, "
+				"IRQ %d\n",
+				netdev->name,
+				R1000_DRIVER_NAME,
+				netdev->base_addr,
+				netdev->dev_addr[0],netdev->dev_addr[1],
+				netdev->dev_addr[2],netdev->dev_addr[3],
+				netdev->dev_addr[4],netdev->dev_addr[5],
+				netdev->irq);
+
+
+	// Config PHY
+	r1000_hw_PHY_config(netdev);
+
+	DBG_PRINT("Set MAC Reg C+CR Offset 0x82h = 0x01h\n");
+	RTL_W8( 0x82, 0x01 );
+
+	if( priv->mcfg < MCFG_METHOD_3 ){
+		DBG_PRINT("Set PCI Latency=0x40\n");
+		pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0x40);
+	}
+
+	if( priv->mcfg == MCFG_METHOD_2 ){
+		DBG_PRINT("Set MAC Reg C+CR Offset 0x82h = 0x01h\n");
+		RTL_W8( 0x82, 0x01 );
+		DBG_PRINT("Set PHY Reg 0x0bh = 0x00h\n");
+		R1000_WRITE_GMII_REG( ioaddr, 0x0b, 0x0000 );	//w 0x0b 15 0 0
+	}
+
+	// if TBI is not endbled
+	if( !(RTL_R8(PHYstatus) & TBI_Enable) ){
+//		val = R1000_READ_GMII_REG( ioaddr, PHY_AUTO_NEGO_REG );
+
+//#ifdef R1000_HW_FLOW_CONTROL_SUPPORT
+//		val |= PHY_Cap_PAUSE | PHY_Cap_ASYM_PAUSE ;
+//#endif //end #define R1000_HW_FLOW_CONTROL_SUPPORT
+
+		if(speed[board_idx] == -1)
+			speed[board_idx] = SPEED_1000;
+
+		if((duplex[board_idx] == -1) || ((duplex[board_idx] == DUPLEX_HALF) && (speed[board_idx] == SPEED_1000)))
+			duplex[board_idx] = DUPLEX_FULL;
+
+		if(autoneg[board_idx] == -1)
+			autoneg[board_idx] = AUTONEG_ENABLE;
+
+		speed_opt = (board_idx >= MAX_UNITS) ? -1 : speed[board_idx];
+		duplex_opt = (board_idx >= MAX_UNITS) ? -1 : duplex[board_idx];
+		autoneg_opt = (board_idx >= MAX_UNITS) ? -1 : autoneg[board_idx];
+
+		r1000_set_medium(netdev,speed_opt,duplex_opt,autoneg_opt);
+	}// end of TBI is not enabled
+	else{
+		udelay(100);
+		DBG_PRINT("1000Mbps Full-duplex operation, TBI Link %s!\n",(RTL_R32(TBICSR) & TBILinkOK) ? "OK" : "Failed" );
+	}// end of TBI is not enabled
+
+	//show some information after the driver is inserted
+	if(( priv->mcfg == MCFG_METHOD_11 )||( priv->mcfg == MCFG_METHOD_12 ))
+		printk("Realtek RTL8168/8111 Family PCI-E Gigabit Ethernet Network Adapter\n");
+	else if((priv->mcfg==MCFG_METHOD_13)||(priv->mcfg==MCFG_METHOD_14)||(priv->mcfg==MCFG_METHOD_15))
+		printk("Realtek RTL8139/810x Family Fast Ethernet Network Adapter\n");
+	else
+		printk("Realtek RTL8169/8110 Family Gigabit Ethernet Network Adapter\n");
+
+	printk("Driver version:%s\n",R1000_VERSION);
+	printk("Released date:%s\n",RELEASE_DATE);
+	if(RTL_R8(PHYstatus) & LinkStatus){
+		printk("Link Status:%s\n","Linked");
+
+		if(RTL_R8(PHYstatus) & _1000Mbps)
+			printk("Link Speed:1000Mbps\n");
+		else if(RTL_R8(PHYstatus) & _100Mbps)
+			printk("Link Speed:100Mbps\n");
+		else if(RTL_R8(PHYstatus) & _10Mbps)
+			printk("Link Speed:10Mbps\n");
+
+		printk("Duplex mode:%s\n",RTL_R8(PHYstatus)&FullDup?"Full-Duplex":"Half-Duplex");
+	}else{
+		printk("Link Status:%s\n","Not Linked");
+	}
+#ifdef R1000_USE_IO
+	printk("I/O Base:0x%X(I/O port)\n",(unsigned int)(priv->ioaddr));
+#else
+	printk("I/O Base:0x%X(I/O memory)\n",(unsigned int)(priv->ioaddr));
+#endif	//R1000_USE_IO
+	printk("IRQ:%d\n",netdev->irq);
+
+	return 0;
+}
+
+static void __devexit r1000_remove_one (struct pci_dev *pdev)
+{
+	struct net_device *netdev = pci_get_drvdata(pdev);
+
+	assert (netdev != NULL);
+	assert (priv != NULL);
+
+	unregister_netdev(netdev);
+
+#ifndef R1000_USE_IO
+	iounmap ((void *)(netdev->base_addr));
+#endif
+	pci_release_regions (pdev);
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
+	kfree(netdev);
+#else
+	free_netdev(netdev);
+#endif
+
+	pci_set_drvdata (pdev, NULL);
+}
+
+static int r1000_open (struct net_device *netdev)
+{
+	struct r1000_private *priv = netdev->priv;
+	struct pci_dev *pdev = priv->pci_dev;
+	int retval;
+//	u8 diff;
+//	u32 TxPhyAddr, RxPhyAddr;
+
+
+	if( priv->drvinit_fail == 1 ){
+		printk("%s: Gigabit driver open failed.\n", netdev->name );
+		return -ENOMEM;
+	}
+
+	retval = request_irq (netdev->irq, r1000_interrupt, SA_SHIRQ, netdev->name, netdev);
+	if (retval) {
+		return retval;
+	}
+
+	//2004-05-11
+	// Allocate tx/rx descriptor space
+	priv->sizeof_txdesc_space = NUM_TX_DESC * sizeof(struct TxDesc)+256;
+	priv->txdesc_space = pci_alloc_consistent( pdev, priv->sizeof_txdesc_space, &priv->txdesc_phy_dma_addr );
+	if( priv->txdesc_space == NULL ){
+		printk("%s: Gigabit driver alloc txdesc_space failed.\n", netdev->name );
+		return -ENOMEM;
+	}
+	priv->sizeof_rxdesc_space = NUM_RX_DESC * sizeof(struct RxDesc)+256;
+	priv->rxdesc_space = pci_alloc_consistent( pdev, priv->sizeof_rxdesc_space, &priv->rxdesc_phy_dma_addr );
+	if( priv->rxdesc_space == NULL ){
+		printk("%s: Gigabit driver alloc rxdesc_space failed.\n", netdev->name );
+		return -ENOMEM;
+	}
+
+	if(priv->txdesc_phy_dma_addr & 0xff){
+		printk("%s: Gigabit driver txdesc_phy_dma_addr is not 256-bytes-aligned.\n", netdev->name );
+	}
+	if(priv->rxdesc_phy_dma_addr & 0xff){
+		printk("%s: Gigabit driver rxdesc_phy_dma_addr is not 256-bytes-aligned.\n", netdev->name );
+	}
+	// Set tx/rx descriptor space
+	priv->TxDescArray = (struct TxDesc *)priv->txdesc_space;
+	priv->RxDescArray = (struct RxDesc *)priv->rxdesc_space;
+
+	{
+		int i;
+		struct sk_buff *skb = NULL;
+
+		for(i=0;i<NUM_RX_DESC;i++){
+			skb = R1000_ALLOC_RXSKB(MAX_RX_SKBDATA_SIZE);
+			if( skb != NULL ) {
+				skb_reserve (skb, 8);	// 16 byte align the IP fields. //
+				priv->Rx_skbuff[i] = skb;
+			}
+			else{
+				printk("%s: Gigabit driver failed to allocate skbuff.\n", netdev->name);
+				priv->drvinit_fail = 1;
+			}
+		}
+	}
+
+
+	//////////////////////////////////////////////////////////////////////////////
+	r1000_init_ring(netdev);
+	r1000_hw_start(netdev);
+
+
+	// ------------------------------------------------------
+	DBG_PRINT("FIX PCS -> r1000_request_timer\n");
+	priv->expire_time = R1000_TIMER_EXPIRE_TIME;
+	r1000_request_timer( (&priv->r1000_timer), priv->expire_time, r1000_timer_handler, ((void *)netdev) );  //in open()
+
+
+	DBG_PRINT("%s: %s() alloc_rxskb_cnt = %d\n", netdev->name, __FUNCTION__, alloc_rxskb_cnt );
+
+	return 0;
+
+}//end of r1000_open (struct net_device *netdev)
+
+static void r1000_hw_PHY_reset(struct net_device *netdev)
+{
+	int val, phy_reset_expiretime = 50;
+	struct r1000_private *priv = netdev->priv;
+	unsigned long ioaddr = priv->ioaddr;
+
+	DBG_PRINT("%s: Reset RTL8169s PHY\n", netdev->name);
+
+	val = ( R1000_READ_GMII_REG( ioaddr, 0 ) | 0x8000 ) & 0xffff;
+	R1000_WRITE_GMII_REG( ioaddr, 0, val );
+
+	do //waiting for phy reset
+	{
+		if( R1000_READ_GMII_REG( ioaddr, 0 ) & 0x8000 ){
+			phy_reset_expiretime --;
+			udelay(100);
+		}
+		else{
+			break;
+		}
+	}while( phy_reset_expiretime >= 0 );
+
+	assert( phy_reset_expiretime > 0 );
+}
+
+static void r1000_hw_PHY_config (struct net_device *netdev)
+{
+	struct r1000_private *priv = netdev->priv;
+	void *ioaddr = (void*)priv->ioaddr;
+
+	DBG_PRINT("priv->mcfg=%d, priv->pcfg=%d\n",priv->mcfg,priv->pcfg);
+
+	if( priv->mcfg == MCFG_METHOD_4 ){
+#if 0
+		R1000_WRITE_GMII_REG( (unsigned long)ioaddr, 0x1F, 0x0001 );
+		R1000_WRITE_GMII_REG( (unsigned long)ioaddr, 0x1b, 0x841e );
+		R1000_WRITE_GMII_REG( (unsigned long)ioaddr, 0x0e, 0x7bfb );
+		R1000_WRITE_GMII_REG( (unsigned long)ioaddr, 0x09, 0x273a );
+#endif
+
+		R1000_WRITE_GMII_REG( (unsigned long)ioaddr, 0x1F, 0x0002 );
+		R1000_WRITE_GMII_REG( (unsigned long)ioaddr, 0x01, 0x90D0 );
+		R1000_WRITE_GMII_REG( (unsigned long)ioaddr, 0x1F, 0x0000 );
+	}else if((priv->mcfg == MCFG_METHOD_2)||(priv->mcfg == MCFG_METHOD_3)){
+		R1000_WRITE_GMII_REG( (unsigned long)ioaddr, 0x1f, 0x0001 );
+		R1000_WRITE_GMII_REG( (unsigned long)ioaddr, 0x06, 0x006e );
+		R1000_WRITE_GMII_REG( (unsigned long)ioaddr, 0x08, 0x0708 );
+		R1000_WRITE_GMII_REG( (unsigned long)ioaddr, 0x15, 0x4000 );
+		R1000_WRITE_GMII_REG( (unsigned long)ioaddr, 0x18, 0x65c7 );
+
+		R1000_WRITE_GMII_REG( (unsigned long)ioaddr, 0x1f, 0x0001 );
+		R1000_WRITE_GMII_REG( (unsigned long)ioaddr, 0x03, 0x00a1 );
+		R1000_WRITE_GMII_REG( (unsigned long)ioaddr, 0x02, 0x0008 );
+		R1000_WRITE_GMII_REG( (unsigned long)ioaddr, 0x01, 0x0120 );
+		R1000_WRITE_GMII_REG( (unsigned long)ioaddr, 0x00, 0x1000 );
+		R1000_WRITE_GMII_REG( (unsigned long)ioaddr, 0x04, 0x0800 );
+		R1000_WRITE_GMII_REG( (unsigned long)ioaddr, 0x04, 0x0000 );
+
+		R1000_WRITE_GMII_REG( (unsigned long)ioaddr, 0x03, 0xff41 );
+		R1000_WRITE_GMII_REG( (unsigned long)ioaddr, 0x02, 0xdf60 );
+		R1000_WRITE_GMII_REG( (unsigned long)ioaddr, 0x01, 0x0140 );
+		R1000_WRITE_GMII_REG( (unsigned long)ioaddr, 0x00, 0x0077 );
+		R1000_WRITE_GMII_REG( (unsigned long)ioaddr, 0x04, 0x7800 );
+		R1000_WRITE_GMII_REG( (unsigned long)ioaddr, 0x04, 0x7000 );
+
+		R1000_WRITE_GMII_REG( (unsigned long)ioaddr, 0x03, 0x802f );
+		R1000_WRITE_GMII_REG( (unsigned long)ioaddr, 0x02, 0x4f02 );
+		R1000_WRITE_GMII_REG( (unsigned long)ioaddr, 0x01, 0x0409 );
+		R1000_WRITE_GMII_REG( (unsigned long)ioaddr, 0x00, 0xf0f9 );
+		R1000_WRITE_GMII_REG( (unsigned long)ioaddr, 0x04, 0x9800 );
+		R1000_WRITE_GMII_REG( (unsigned long)ioaddr, 0x04, 0x9000 );
+
+		R1000_WRITE_GMII_REG( (unsigned long)ioaddr, 0x03, 0xdf01 );
+		R1000_WRITE_GMII_REG( (unsigned long)ioaddr, 0x02, 0xdf20 );
+		R1000_WRITE_GMII_REG( (unsigned long)ioaddr, 0x01, 0xff95 );
+		R1000_WRITE_GMII_REG( (unsigned long)ioaddr, 0x00, 0xba00 );
+		R1000_WRITE_GMII_REG( (unsigned long)ioaddr, 0x04, 0xa800 );
+		R1000_WRITE_GMII_REG( (unsigned long)ioaddr, 0x04, 0xa000 );
+
+		R1000_WRITE_GMII_REG( (unsigned long)ioaddr, 0x03, 0xff41 );
+		R1000_WRITE_GMII_REG( (unsigned long)ioaddr, 0x02, 0xdf20 );
+		R1000_WRITE_GMII_REG( (unsigned long)ioaddr, 0x01, 0x0140 );
+		R1000_WRITE_GMII_REG( (unsigned long)ioaddr, 0x00, 0x00bb );
+		R1000_WRITE_GMII_REG( (unsigned long)ioaddr, 0x04, 0xb800 );
+		R1000_WRITE_GMII_REG( (unsigned long)ioaddr, 0x04, 0xb000 );
+
+		R1000_WRITE_GMII_REG( (unsigned long)ioaddr, 0x03, 0xdf41 );
+		R1000_WRITE_GMII_REG( (unsigned long)ioaddr, 0x02, 0xdc60 );
+		R1000_WRITE_GMII_REG( (unsigned long)ioaddr, 0x01, 0x6340 );
+		R1000_WRITE_GMII_REG( (unsigned long)ioaddr, 0x00, 0x007d );
+		R1000_WRITE_GMII_REG( (unsigned long)ioaddr, 0x04, 0xd800 );
+		R1000_WRITE_GMII_REG( (unsigned long)ioaddr, 0x04, 0xd000 );
+
+		R1000_WRITE_GMII_REG( (unsigned long)ioaddr, 0x03, 0xdf01 );
+		R1000_WRITE_GMII_REG( (unsigned long)ioaddr, 0x02, 0xdf20 );
+		R1000_WRITE_GMII_REG( (unsigned long)ioaddr, 0x01, 0x100a );
+		R1000_WRITE_GMII_REG( (unsigned long)ioaddr, 0x00, 0xa0ff );
+		R1000_WRITE_GMII_REG( (unsigned long)ioaddr, 0x04, 0xf800 );
+		R1000_WRITE_GMII_REG( (unsigned long)ioaddr, 0x04, 0xf000 );
+
+		R1000_WRITE_GMII_REG( (unsigned long)ioaddr, 0x1f, 0x0000 );
+		R1000_WRITE_GMII_REG( (unsigned long)ioaddr, 0x0b, 0x0000 );
+		R1000_WRITE_GMII_REG( (unsigned long)ioaddr, 0x00, 0x9200 );
+#if 0
+		R1000_WRITE_GMII_REG( (unsigned long)ioaddr, 0x1F, 0x0001 );
+		R1000_WRITE_GMII_REG( (unsigned long)ioaddr, 0x15, 0x1000 );
+		R1000_WRITE_GMII_REG( (unsigned long)ioaddr, 0x18, 0x65C7 );
+		R1000_WRITE_GMII_REG( (unsigned long)ioaddr, 0x04, 0x0000 );
+		R1000_WRITE_GMII_REG( (unsigned long)ioaddr, 0x03, 0x00A1 );
+		R1000_WRITE_GMII_REG( (unsigned long)ioaddr, 0x02, 0x0008 );
+		R1000_WRITE_GMII_REG( (unsigned long)ioaddr, 0x01, 0x1020 );
+		R1000_WRITE_GMII_REG( (unsigned long)ioaddr, 0x00, 0x1000 );
+		R1000_WRITE_GMII_REG( (unsigned long)ioaddr, 0x04, 0x0800 );
+		R1000_WRITE_GMII_REG( (unsigned long)ioaddr, 0x04, 0x0000 );
+		R1000_WRITE_GMII_REG( (unsigned long)ioaddr, 0x04, 0x7000 );
+		R1000_WRITE_GMII_REG( (unsigned long)ioaddr, 0x03, 0xFF41 );
+		R1000_WRITE_GMII_REG( (unsigned long)ioaddr, 0x02, 0xDE60 );
+		R1000_WRITE_GMII_REG( (unsigned long)ioaddr, 0x01, 0x0140 );
+		R1000_WRITE_GMII_REG( (unsigned long)ioaddr, 0x00, 0x0077 );
+		R1000_WRITE_GMII_REG( (unsigned long)ioaddr, 0x04, 0x7800 );
+		R1000_WRITE_GMII_REG( (unsigned long)ioaddr, 0x04, 0x7000 );
+		R1000_WRITE_GMII_REG( (unsigned long)ioaddr, 0x04, 0xA000 );
+		R1000_WRITE_GMII_REG( (unsigned long)ioaddr, 0x03, 0xDF01 );
+		R1000_WRITE_GMII_REG( (unsigned long)ioaddr, 0x02, 0xDF20 );
+		R1000_WRITE_GMII_REG( (unsigned long)ioaddr, 0x01, 0xFF95 );
+		R1000_WRITE_GMII_REG( (unsigned long)ioaddr, 0x00, 0xFA00 );
+		R1000_WRITE_GMII_REG( (unsigned long)ioaddr, 0x04, 0xA800 );
+		R1000_WRITE_GMII_REG( (unsigned long)ioaddr, 0x04, 0xA000 );
+		R1000_WRITE_GMII_REG( (unsigned long)ioaddr, 0x04, 0xB000 );
+		R1000_WRITE_GMII_REG( (unsigned long)ioaddr, 0x03, 0xFF41 );
+		R1000_WRITE_GMII_REG( (unsigned long)ioaddr, 0x02, 0xDE20 );
+		R1000_WRITE_GMII_REG( (unsigned long)ioaddr, 0x01, 0x0140 );
+		R1000_WRITE_GMII_REG( (unsigned long)ioaddr, 0x00, 0x00BB );
+		R1000_WRITE_GMII_REG( (unsigned long)ioaddr, 0x04, 0xB800 );
+		R1000_WRITE_GMII_REG( (unsigned long)ioaddr, 0x04, 0xB000 );
+		R1000_WRITE_GMII_REG( (unsigned long)ioaddr, 0x04, 0xF000 );
+		R1000_WRITE_GMII_REG( (unsigned long)ioaddr, 0x03, 0xDF01 );
+		R1000_WRITE_GMII_REG( (unsigned long)ioaddr, 0x02, 0xDF20 );
+		R1000_WRITE_GMII_REG( (unsigned long)ioaddr, 0x01, 0xFF95 );
+		R1000_WRITE_GMII_REG( (unsigned long)ioaddr, 0x00, 0xBF00 );
+		R1000_WRITE_GMII_REG( (unsigned long)ioaddr, 0x04, 0xF800 );
+		R1000_WRITE_GMII_REG( (unsigned long)ioaddr, 0x04, 0xF000 );
+		R1000_WRITE_GMII_REG( (unsigned long)ioaddr, 0x04, 0x0000 );
+		R1000_WRITE_GMII_REG( (unsigned long)ioaddr, 0x1F, 0x0000 );
+		R1000_WRITE_GMII_REG( (unsigned long)ioaddr, 0x0B, 0x0000 );
+#endif
+	}
+	else{
+		DBG_PRINT("priv->mcfg=%d. Discard hw PHY config.\n",priv->mcfg);
+	}
+}
+
+static void r1000_hw_start (struct net_device *netdev)
+{
+	struct r1000_private *priv = netdev->priv;
+	struct pci_dev *pdev = priv->pci_dev;
+	unsigned long ioaddr = priv->ioaddr;
+	u32 i;
+	u8 i8;
+	u16 i16;
+
+	if((priv->mcfg!=MCFG_METHOD_5)&&(priv->mcfg!=MCFG_METHOD_11)&&
+	   (priv->mcfg!=MCFG_METHOD_12)&&(priv->mcfg!=MCFG_METHOD_13)&&
+	   (priv->mcfg!=MCFG_METHOD_14)&&(priv->mcfg!=MCFG_METHOD_15)){
+		/* Soft reset the chip. */
+		RTL_W8 ( ChipCmd, CmdReset);
+
+		/* Check that the chip has finished the reset. */
+		for (i = 1000; i > 0; i--){
+			if ((RTL_R8( ChipCmd ) & CmdReset) == 0) break;
+			else udelay (10);
+		}
+
+		RTL_W8 ( Cfg9346, Cfg9346_Unlock);
+		RTL_W8 ( ChipCmd, CmdTxEnb | CmdRxEnb);
+		RTL_W8 ( ETThReg, ETTh);
+
+		RTL_W16(CPlusCmd,RTL_R16(CPlusCmd)|CPCR_MulRW_Enable);
+		pci_write_config_byte(pdev,Cache_Line_Size,0x08);
+
+		// For gigabit rtl8169
+		RTL_W16	( RxMaxSize, (unsigned short)priv->hw_rx_pkt_len );
+
+		// Set Rx Config register
+		i = r1000_rx_config | ( RTL_R32( RxConfig ) & rtl_chip_info[priv->chipset].RxConfigMask);
+		RTL_W32 ( RxConfig, i);
+
+
+		/* Set DMA burst size and Interframe Gap Time */
+		RTL_W32 ( TxConfig, (TX_DMA_BURST << TxDMAShift) | (InterFrameGap << TxInterFrameGapShift) );
+
+
+
+		RTL_W16( CPlusCmd, RTL_R16(CPlusCmd) );
+
+		if(priv->mcfg==MCFG_METHOD_2||priv->mcfg==MCFG_METHOD_3){
+			RTL_W16( CPlusCmd, (RTL_R16(CPlusCmd)|(1<<14)|(1<<3)) );
+			DBG_PRINT("Set MAC Reg C+CR Offset 0xE0: bit-3 and bit-14\n");
+		}else{
+			RTL_W16( CPlusCmd, (RTL_R16(CPlusCmd)|(1<<3)) );
+			DBG_PRINT("Set MAC Reg C+CR Offset 0xE0: bit-3.\n");
+		}
+
+		{
+			RTL_W16(0xE2,0x0000);
+		}
+
+		priv->cur_rx = 0;
+
+		RTL_W32 ( TxDescStartAddr, priv->txdesc_phy_dma_addr);
+		RTL_W32 ( TxDescStartAddr + 4, 0x00);
+		RTL_W32 ( RxDescStartAddr, priv->rxdesc_phy_dma_addr);
+		RTL_W32 ( RxDescStartAddr + 4, 0x00);
+
+		RTL_W8 ( Cfg9346, Cfg9346_Lock );
+		udelay (10);
+
+		RTL_W32 ( RxMissed, 0 );
+
+		r1000_set_rx_mode(netdev);
+
+		RTL_W16 ( MultiIntr, RTL_R16(MultiIntr) & 0xF000);
+
+		RTL_W16 ( IntrMask, r1000_intr_mask);
+	}else{
+		/* Soft reset the chip. */
+		RTL_W8 ( ChipCmd, CmdReset);
+
+		/* Check that the chip has finished the reset. */
+		for (i = 1000; i > 0; i--){
+			if ((RTL_R8( ChipCmd ) & CmdReset) == 0) break;
+			else udelay (10);
+		}
+
+		if(priv->mcfg==MCFG_METHOD_5){
+			RTL_W16(CPlusCmd,RTL_R16(CPlusCmd)|CPCR_MulRW_Enable);
+			pci_write_config_byte(pdev,Cache_Line_Size,0x08);
+		}
+
+		if( priv->mcfg == MCFG_METHOD_13 ){
+			pci_write_config_word(pdev,0x68,0x00);
+			pci_write_config_word(pdev,0x69,0x08);
+		}
+
+		if( priv->mcfg == MCFG_METHOD_5 ){
+			i8=RTL_R8(Config2);
+			i8=i8&0x07;
+			if(i8&&0x01)
+				RTL_W32(Off7Ch,0x0007FFFF);
+	
+			i=0x0007FF00;
+			RTL_W32(Off7Ch, i);
+
+			pci_read_config_word(pdev,0x04,&i16);
+			i16=i16&0xEF;
+			pci_write_config_word(pdev,0x04,i16);
+		}
+
+		RTL_W8 ( Cfg9346, Cfg9346_Unlock);
+		RTL_W8 ( ETThReg, ETTh);
+
+		// For gigabit rtl8169
+		RTL_W16	( RxMaxSize, (unsigned short)priv->hw_rx_pkt_len );
+
+		RTL_W16( CPlusCmd, RTL_R16(CPlusCmd) );
+
+		if(priv->mcfg==MCFG_METHOD_2||priv->mcfg==MCFG_METHOD_3){
+			RTL_W16( CPlusCmd, (RTL_R16(CPlusCmd)|(1<<14)|(1<<3)) );
+			DBG_PRINT("Set MAC Reg C+CR Offset 0xE0: bit-3 and bit-14\n");
+		}else{
+			RTL_W16( CPlusCmd, (RTL_R16(CPlusCmd)|(1<<3)) );
+			DBG_PRINT("Set MAC Reg C+CR Offset 0xE0: bit-3.\n");
+		}
+
+		{
+			RTL_W16(0xE2,0x0000);
+		}
+
+		priv->cur_rx = 0;
+
+		RTL_W32 ( TxDescStartAddr, priv->txdesc_phy_dma_addr);
+		RTL_W32 ( TxDescStartAddr + 4, 0x00);
+		RTL_W32 ( RxDescStartAddr, priv->rxdesc_phy_dma_addr);
+		RTL_W32 ( RxDescStartAddr + 4, 0x00);
+		RTL_W8 ( ChipCmd, CmdTxEnb | CmdRxEnb);
+		// Set Rx Config register
+		i = r1000_rx_config | ( RTL_R32( RxConfig ) & rtl_chip_info[priv->chipset].RxConfigMask);
+		RTL_W32 ( RxConfig, i);
+
+		/* Set DMA burst size and Interframe Gap Time */
+		RTL_W32 ( TxConfig, (TX_DMA_BURST << TxDMAShift) | (InterFrameGap << TxInterFrameGapShift) );
+
+		RTL_W8 ( Cfg9346, Cfg9346_Lock );
+		udelay (10);
+
+		RTL_W32 ( RxMissed, 0 );
+
+		r1000_set_rx_mode(netdev);
+
+		RTL_W16 ( MultiIntr, RTL_R16(MultiIntr) & 0xF000);
+
+		RTL_W16 ( IntrMask, r1000_intr_mask);
+	}
+
+	netif_start_queue(netdev);
+
+}//end of r1000_hw_start (struct net_device *netdev)
+
+static void r1000_init_ring (struct net_device *netdev)
+{
+	struct r1000_private *priv = netdev->priv;
+	struct pci_dev *pdev = priv->pci_dev;
+	int i;
+	struct sk_buff	*skb;
+	
+
+	priv->cur_rx = 0;
+	priv->cur_tx = 0;
+	priv->dirty_tx = 0;
+	memset(priv->TxDescArray, 0x0, NUM_TX_DESC*sizeof(struct TxDesc));
+	memset(priv->RxDescArray, 0x0, NUM_RX_DESC*sizeof(struct RxDesc));
+
+
+	for (i=0 ; i<NUM_TX_DESC ; i++){
+		priv->Tx_skbuff[i]=NULL;
+		priv->txdesc_array_dma_addr[i] = pci_map_single(pdev, &priv->TxDescArray[i], sizeof(struct TxDesc), PCI_DMA_TODEVICE);
+	}
+
+	for (i=0; i <NUM_RX_DESC; i++) {
+		if(i==(NUM_RX_DESC-1)){
+			priv->RxDescArray[i].status = cpu_to_le32((OWNbit | EORbit) | (unsigned long)priv->hw_rx_pkt_len);
+		}
+		else{
+			priv->RxDescArray[i].status = cpu_to_le32(OWNbit | (unsigned long)priv->hw_rx_pkt_len);
+		}
+
+		{//-----------------------------------------------------------------------
+			skb = priv->Rx_skbuff[i];
+			priv->rx_skbuff_dma_addr[i] = pci_map_single(pdev, skb->data, MAX_RX_SKBDATA_SIZE, PCI_DMA_FROMDEVICE);
+
+			if( skb != NULL ){
+				priv->RxDescArray[i].buf_addr = cpu_to_le32(priv->rx_skbuff_dma_addr[i]);
+				priv->RxDescArray[i].buf_Haddr = 0;
+			}
+			else{
+				DBG_PRINT("%s: %s() Rx_skbuff == NULL\n", netdev->name, __FUNCTION__);
+				priv->drvinit_fail = 1;
+			}
+		}//-----------------------------------------------------------------------
+		priv->rxdesc_array_dma_addr[i] = pci_map_single(pdev, &priv->RxDescArray[i], sizeof(struct RxDesc), PCI_DMA_TODEVICE);
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,10)
+		pci_dma_sync_single(pdev, priv->rxdesc_array_dma_addr[i], sizeof(struct RxDesc), PCI_DMA_TODEVICE);
+#endif
+	}
+}
+
+static void r1000_tx_clear (struct r1000_private *priv)
+{
+	int i;
+
+	priv->cur_tx = 0;
+	for ( i = 0 ; i < NUM_TX_DESC ; i++ ){
+		if ( priv->Tx_skbuff[i] != NULL ) {
+			dev_kfree_skb ( priv->Tx_skbuff[i] );
+			priv->Tx_skbuff[i] = NULL;
+			priv->stats.tx_dropped++;
+		}
+	}
+}
+
+static void r1000_tx_timeout (struct net_device *netdev)
+{
+	struct r1000_private *priv = netdev->priv;
+	unsigned long ioaddr = priv->ioaddr;
+	u8 tmp8;
+
+	/* disable Tx, if not already */
+	tmp8 = RTL_R8(ChipCmd);
+	if(tmp8&CmdTxEnb){
+		RTL_W8(ChipCmd,tmp8 & ~CmdTxEnb);
+	}
+
+	/* Disable interrupts by clearing the interrupt mask. */
+	RTL_W16(IntrMask,0x0000);
+
+	/* Stop a shared interrupt from scavenging while we are. */
+//	spin_lock_irq(&priv->lock);
+	spin_lock_irq(&priv->tx_lock);
+	r1000_tx_clear(priv);
+//	spin_unlock_irq(&priv->lock);
+	spin_unlock_irq(&priv->tx_lock);
+
+
+	r1000_hw_start(netdev);
+
+	netif_wake_queue(netdev);
+}
+
+static int r1000_start_xmit (struct sk_buff *skb, struct net_device *netdev)
+{
+	struct r1000_private *priv = netdev->priv;
+	unsigned long ioaddr = priv->ioaddr;
+	struct pci_dev *pdev = priv->pci_dev;
+	int entry = priv->cur_tx % NUM_TX_DESC;
+	int buf_len = 60;
+	dma_addr_t txbuf_dma_addr;
+	
+//	spin_lock_irq(&priv->lock);
+	spin_lock(&priv->tx_lock);
+	if( (le32_to_cpu(priv->TxDescArray[entry].status) & OWNbit)==0 ){
+		priv->Tx_skbuff[entry] = skb;
+		txbuf_dma_addr = pci_map_single(pdev, skb->data, skb->len, PCI_DMA_TODEVICE);
+		
+		priv->TxDescArray[entry].buf_addr = cpu_to_le32(txbuf_dma_addr);
+		DBG_PRINT("%s: TX pkt_size = %d\n", __FUNCTION__, skb->len);
+		if( skb->len <= priv->tx_pkt_len ){
+			buf_len = skb->len;
+		}
+		else{
+			printk("%s: Error -- Tx packet size(%d) > mtu(%d)+14\n", netdev->name, skb->len, netdev->mtu);
+			buf_len = priv->tx_pkt_len;
+		}
+
+		if( entry != (NUM_TX_DESC-1) ){
+			priv->TxDescArray[entry].status = cpu_to_le32((OWNbit | FSbit | LSbit) | buf_len);
+		}
+		else{
+			priv->TxDescArray[entry].status = cpu_to_le32((OWNbit | EORbit | FSbit | LSbit) | buf_len);
+		}
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,10)
+		pci_dma_sync_single(pdev, priv->txdesc_array_dma_addr[entry], sizeof(struct TxDesc), PCI_DMA_TODEVICE);
+#endif
+
+
+		RTL_W8(TxPoll,0x40);		//set polling bit
+
+		netdev->trans_start = jiffies;
+
+		priv->stats.tx_bytes += ( (skb->len > ETH_ZLEN) ? skb->len : ETH_ZLEN);
+		priv->cur_tx++;
+	}//end of if( (priv->TxDescArray[entry].status & 0x80000000)==0 )
+
+//	spin_unlock_irq(&priv->lock);
+
+	if ( (priv->cur_tx - NUM_TX_DESC) == priv->dirty_tx ){
+		netif_stop_queue(netdev);
+	}
+	else{
+		if (netif_queue_stopped(netdev)){
+			netif_wake_queue(netdev);
+		}
+	}
+
+	spin_unlock(&priv->tx_lock);
+
+	return 0;
+}
+
+#ifdef	R1000_BOTTOM_HALVES
+static void r1000_tx_interrupt(unsigned long ndev){
+	struct net_device *netdev = (void *)ndev;
+	struct r1000_private *priv = netdev->priv;
+#else
+static void r1000_tx_interrupt(struct net_device *netdev, struct r1000_private *priv, unsigned long ioaddr){
+#endif	//R1000_BOTTOM_HALVES
+
+	unsigned long flags;
+
+	spin_lock_irqsave(&priv->tx_lock,flags);
+	r1000_tx_action(netdev);
+	spin_unlock_irqrestore(&priv->tx_lock,flags);
+}
+
+static void FASTCALL (r1000_tx_action(struct net_device *netdev));
+static void fastcall r1000_tx_action(struct net_device *netdev){
+
+	struct r1000_private *priv = netdev->priv;
+	unsigned long dirty_tx, tx_left=0;
+	int entry = priv->cur_tx % NUM_TX_DESC;
+    	int txloop_cnt = 0;
+
+	assert (netdev != NULL);
+	assert (priv != NULL);
+	assert (ioaddr != NULL);
+
+	dirty_tx = priv->dirty_tx;
+	tx_left = priv->cur_tx - dirty_tx;
+
+	while( (tx_left > 0) && (txloop_cnt < max_interrupt_work) ){
+		if( (le32_to_cpu(priv->TxDescArray[entry].status) & OWNbit) == 0 ){
+			dev_kfree_skb_irq( priv->Tx_skbuff[dirty_tx % NUM_TX_DESC] );
+			priv->Tx_skbuff[dirty_tx % NUM_TX_DESC] = NULL;
+			priv->stats.tx_packets++;
+			dirty_tx++;
+			tx_left--;
+			entry++;
+		}
+		txloop_cnt ++;
+	}
+
+	if (priv->dirty_tx != dirty_tx) {
+		priv->dirty_tx = dirty_tx;
+		if (netif_queue_stopped(netdev))
+			netif_wake_queue(netdev);
+	}
+}
+
+#ifdef	R1000_BOTTOM_HALVES
+static void r1000_rx_interrupt(unsigned long ndev){
+	struct net_device *netdev = (void *)ndev;
+	struct r1000_private *priv = netdev->priv;
+#else
+static void r1000_rx_interrupt(struct net_device *netdev, struct r1000_private *priv, unsigned long ioaddr){
+#endif	//R1000_BOTTOM_HALVES
+
+	unsigned long flags;
+
+	spin_lock_irqsave(&priv->rx_lock,flags);
+	r1000_rx_action(netdev);
+	spin_unlock_irqrestore(&priv->rx_lock,flags);
+}
+
+static void FASTCALL (r1000_rx_action(struct net_device *netdev));
+static void fastcall r1000_rx_action(struct net_device *netdev){
+
+	struct r1000_private *priv = netdev->priv;
+	struct pci_dev *pdev = priv->pci_dev;
+	int cur_rx;
+	int pkt_size = 0 ;
+	int rxdesc_cnt = 0;
+	int ret;
+	struct sk_buff *n_skb = NULL;
+	struct sk_buff *cur_skb;
+	struct sk_buff *rx_skb;
+	struct RxDesc *rxdesc;
+
+	assert(netdev != NULL);
+	assert (priv != NULL);
+	assert (ioaddr != NULL);
+
+	cur_rx = priv->cur_rx;
+
+	rxdesc = &priv->RxDescArray[cur_rx];
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,10)
+	pci_dma_sync_single(pdev, priv->rxdesc_array_dma_addr[cur_rx], sizeof(struct RxDesc), PCI_DMA_FROMDEVICE);
+#endif
+
+	while (((le32_to_cpu(rxdesc->status) & OWNbit)== 0) && (rxdesc_cnt < max_interrupt_work)){
+
+	    rxdesc_cnt++;
+
+	    if( le32_to_cpu(rxdesc->status) & RxRES ){
+			printk(KERN_INFO "%s: Rx ERROR!!!\n", netdev->name);
+			priv->stats.rx_errors++;
+			if ( le32_to_cpu(rxdesc->status) & (RxRWT|RxRUNT) )
+				priv->stats.rx_length_errors++;
+			if ( le32_to_cpu(rxdesc->status) & RxCRC)
+				priv->stats.rx_crc_errors++;
+	    }
+	    else{
+			pkt_size=(int)(le32_to_cpu(rxdesc->status) & 0x00001FFF)-4;
+
+			if( pkt_size > priv->rx_pkt_len ){
+				printk("%s: Error -- Rx packet size(%d) > mtu(%d)+14\n", netdev->name, pkt_size, netdev->mtu);
+				pkt_size = priv->rx_pkt_len;
+			}
+
+			DBG_PRINT("%s: RX pkt_size = %d\n", __FUNCTION__, pkt_size);
+
+			{// -----------------------------------------------------
+				rx_skb = priv->Rx_skbuff[cur_rx];
+				n_skb = R1000_ALLOC_RXSKB(MAX_RX_SKBDATA_SIZE);
+				if( n_skb != NULL ) {
+					skb_reserve (n_skb, 8);	// 16 byte align the IP fields. //
+
+					// Indicate rx_skb
+					if( rx_skb != NULL ){
+						rx_skb->dev = netdev;
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,10)
+						pci_dma_sync_single(pdev, priv->rx_skbuff_dma_addr[cur_rx], sizeof(struct RxDesc), PCI_DMA_FROMDEVICE);
+#endif
+
+						skb_put ( rx_skb, pkt_size );
+						rx_skb->protocol = eth_type_trans ( rx_skb, netdev );
+						ret = R1000_NETIF_RX (rx_skb);
+
+//						netdev->last_rx = jiffies;
+						priv->stats.rx_bytes += pkt_size;
+						priv->stats.rx_packets++;
+
+					}//end if( rx_skb != NULL )
+
+					priv->Rx_skbuff[cur_rx] = n_skb;
+				}
+				else{
+					DBG_PRINT("%s: Allocate n_skb failed!\n",__FUNCTION__ );
+					priv->Rx_skbuff[cur_rx] = rx_skb;
+				}
+
+
+				// Update rx descriptor
+				if( cur_rx == (NUM_RX_DESC-1) ){
+					priv->RxDescArray[cur_rx].status  = cpu_to_le32((OWNbit | EORbit) | (unsigned long)priv->hw_rx_pkt_len);
+				}
+				else{
+					priv->RxDescArray[cur_rx].status  = cpu_to_le32(OWNbit | (unsigned long)priv->hw_rx_pkt_len);
+				}
+
+				cur_skb = priv->Rx_skbuff[cur_rx];
+
+				if( cur_skb != NULL ){
+					priv->rx_skbuff_dma_addr[cur_rx] = pci_map_single(pdev, cur_skb->data, MAX_RX_SKBDATA_SIZE, PCI_DMA_FROMDEVICE);
+					rxdesc->buf_addr = cpu_to_le32(priv->rx_skbuff_dma_addr[cur_rx]);
+				}
+				else{
+					DBG_PRINT("%s: %s() cur_skb == NULL\n", netdev->name, __FUNCTION__);
+				}
+
+			}//------------------------------------------------------------
+
+	    }// end of if( priv->RxDescArray[cur_rx].status & RxRES )
+
+	    cur_rx = (cur_rx +1) % NUM_RX_DESC;
+	    rxdesc = &priv->RxDescArray[cur_rx];
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,10)
+	    pci_dma_sync_single(pdev, priv->rxdesc_array_dma_addr[cur_rx], sizeof(struct RxDesc), PCI_DMA_FROMDEVICE);
+#endif
+
+	}// end of while ( (priv->RxDescArray[cur_rx].status & 0x80000000)== 0)
+
+	if( rxdesc_cnt >= max_interrupt_work ){
+		DBG_PRINT("%s: Too much work at Rx interrupt.\n", netdev->name);
+	}
+
+	priv->cur_rx = cur_rx;
+}
+
+/* The interrupt handler does all of the Rx thread work and cleans up after the Tx thread. */
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
+static void r1000_interrupt (int irq, void *dev_instance, struct pt_regs *regs)
+#else
+static irqreturn_t r1000_interrupt (int irq, void *dev_instance, struct pt_regs *regs)
+#endif
+{
+	struct net_device *netdev = (struct net_device *) dev_instance;
+	struct r1000_private *priv = netdev->priv;
+	unsigned long ioaddr = priv->ioaddr;
+	unsigned int status = 0;
+
+	unsigned int phy_status = 0;
+
+	RTL_W16(IntrMask,0x0000);
+
+	status=RTL_R16(IntrStatus);
+
+	if(status==0xFFFF){
+		RTL_W16(IntrMask,r1000_intr_mask);
+		return IRQ_HANDLED;
+	}
+
+	if((status&r1000_intr_mask)==0)
+		return IRQ_NONE;
+
+#if 0
+	if(status&(RxOK|TxOK|TxErr)){
+#ifdef	R1000_BOTTOM_HALVES
+		tasklet_schedule(&priv->r1000_rx_tasklet);
+		tasklet_schedule(&priv->r1000_tx_tasklet);
+#else
+		r1000_rx_interrupt(netdev,priv,ioaddr);
+		r1000_tx_interrupt(netdev,priv,ioaddr);
+#endif	//R1000_BOTTOM_HALVES
+		RTL_W16(IntrStatus,RxOK|TxOK|TxErr);
+	}
+#endif
+
+	if(status&RxOK){
+#ifdef	R1000_BOTTOM_HALVES
+		tasklet_schedule(&priv->r1000_rx_tasklet);
+#else
+		r1000_rx_interrupt(netdev,priv,ioaddr);
+#endif	//R1000_BOTTOM_HALVES
+		RTL_W16(IntrStatus,RxOK);
+	}
+
+	if(status&(TxOK|TxErr)){
+#ifdef	R1000_BOTTOM_HALVES
+		tasklet_schedule(&priv->r1000_tx_tasklet);
+#else
+		r1000_tx_interrupt(netdev,priv,ioaddr);
+#endif	//R1000_BOTTOM_HALVES
+		RTL_W16(IntrStatus,TxOK|TxErr);
+	}
+
+	if(status&RxErr){
+		RTL_W16(IntrStatus,RxErr);
+	}
+
+	if((status&TxOK)&&(status&TxDescUnavail)){
+		RTL_W8(TxPoll,0x40);
+		RTL_W16(IntrStatus,TxOK|TxDescUnavail);
+	}
+
+	if(status & LinkChg){
+		if(((priv->mcfg==MCFG_METHOD_2)||(priv->mcfg==MCFG_METHOD_3))&&(phy_status&_100Mbps)){
+			phy_status = RTL_R8(PHYstatus);
+
+			if(phy_status & LinkStatus){
+				R1000_WRITE_GMII_REG((unsigned long)ioaddr,0x1f,0x0001);
+				R1000_WRITE_GMII_REG((unsigned long)ioaddr,0x10,0xf01b);
+				R1000_WRITE_GMII_REG((unsigned long)ioaddr,0x1f,0x0000);
+			}else{
+				R1000_WRITE_GMII_REG((unsigned long)ioaddr,0x1f,0x0001);
+				R1000_WRITE_GMII_REG((unsigned long)ioaddr,0x10,0xf41b);
+				R1000_WRITE_GMII_REG((unsigned long)ioaddr,0x1f,0x0000);
+			}
+
+		}
+		RTL_W16(IntrStatus,LinkChg);
+	}
+
+	RTL_W16 ( IntrMask, r1000_intr_mask);
+
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
+	return IRQ_HANDLED;
+#endif
+
+}
+
+static int r1000_close(struct net_device *netdev)
+{
+	struct r1000_private *priv = netdev->priv;
+	unsigned long ioaddr = priv->ioaddr;
+	int i;
+
+	// -----------------------------------------
+	r1000_delete_timer( &(priv->r1000_timer) );
+
+	netif_stop_queue(netdev);
+
+#ifdef	R1000_BOTTOM_HALVES
+	tasklet_kill(&priv->r1000_rx_tasklet);
+	tasklet_kill(&priv->r1000_tx_tasklet);
+#endif	//R1000_BOTTOM_HALVES
+
+	spin_lock_irq(&priv->lock);
+
+	/* Stop the chip's Tx and Rx processes. */
+	RTL_W8(ChipCmd,0x00);
+
+	/* Disable interrupts by clearing the interrupt mask. */
+	RTL_W16(IntrMask,0x0000);
+
+	/* Update the error counts. */
+	priv->stats.rx_missed_errors += RTL_R32(RxMissed);
+	RTL_W32(RxMissed,0);
+
+	spin_unlock_irq(&priv->lock);
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
+	synchronize_irq ();
+#else
+	synchronize_irq(netdev->irq);
+#endif
+	free_irq (netdev->irq, netdev);
+
+	r1000_tx_clear (priv);
+	
+	//2004-05-11
+	if(priv->txdesc_space != NULL){
+		pci_free_consistent(
+				priv->pci_dev,
+				priv->sizeof_txdesc_space,
+				priv->txdesc_space,
+				priv->txdesc_phy_dma_addr
+		);
+		priv->txdesc_space = NULL;
+	}
+
+	if(priv->rxdesc_space != NULL){
+		pci_free_consistent(
+				priv->pci_dev,
+				priv->sizeof_rxdesc_space,
+				priv->rxdesc_space,
+				priv->rxdesc_phy_dma_addr
+		);
+		priv->rxdesc_space = NULL;
+	}
+
+	priv->TxDescArray = NULL;
+	priv->RxDescArray = NULL;
+
+	{//-----------------------------------------------------------------------------
+		for(i=0;i<NUM_RX_DESC;i++){
+			if( priv->Rx_skbuff[i] != NULL ) {
+				R1000_FREE_RXSKB ( priv->Rx_skbuff[i] );
+			}
+		}
+	}//-----------------------------------------------------------------------------
+
+	DBG_PRINT("%s: %s() alloc_rxskb_cnt = %d\n", netdev->name, __FUNCTION__, alloc_rxskb_cnt );
+
+	return 0;
+}
+
+static unsigned const ethernet_polynomial = 0x04c11db7U;
+static inline u32 ether_crc (int length, unsigned char *data)
+{
+	int crc = -1;
+
+	while (--length >= 0) {
+		unsigned char current_octet = *data++;
+		int bit;
+		for (bit = 0; bit < 8; bit++, current_octet >>= 1)
+			crc = (crc << 1) ^ ((crc < 0) ^ (current_octet & 1) ? ethernet_polynomial : 0);
+	}
+
+	return crc;
+}
+
+static void r1000_set_rx_mode (struct net_device *netdev)
+{
+	struct r1000_private *priv = netdev->priv;
+	unsigned long ioaddr = priv->ioaddr;
+	unsigned long flags;
+	u32 mc_filter[2];	/* Multicast hash filter */
+	int i, rx_mode;
+	u32 tmp=0;
+	
+
+	if (netdev->flags & IFF_PROMISC) {
+		/* Unconditionally log net taps. */
+		printk (KERN_NOTICE "%s: Promiscuous mode enabled.\n", netdev->name);
+		rx_mode = AcceptBroadcast | AcceptMulticast | AcceptMyPhys | AcceptAllPhys;
+		mc_filter[1] = mc_filter[0] = 0xffffffff;
+	} else if ((netdev->mc_count > multicast_filter_limit) || (netdev->flags & IFF_ALLMULTI)) {
+		/* Too many to filter perfectly -- accept all multicasts. */
+		rx_mode = AcceptBroadcast | AcceptMulticast | AcceptMyPhys;
+		mc_filter[1] = mc_filter[0] = 0xffffffff;
+	} else {
+		struct dev_mc_list *mclist;
+		rx_mode = AcceptBroadcast | AcceptMulticast | AcceptMyPhys;
+		mc_filter[1] = mc_filter[0] = 0;
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
+		for (i = 0, mclist = netdev->mc_list; mclist && i < netdev->mc_count; i++, mclist = mclist->next)
+		{
+			set_bit (ether_crc (ETH_ALEN, mclist->dmi_addr) >> 26, mc_filter);
+		}			
+#else
+		for (i = 0, mclist = netdev->mc_list; mclist && i < netdev->mc_count; i++, mclist = mclist->next)
+		{
+			int bit_nr = ether_crc(ETH_ALEN, mclist->dmi_addr) >> 26;
+			                                                                                                     
+			mc_filter[bit_nr >> 5] |= 1 << (bit_nr & 31);
+			rx_mode |= AcceptMulticast;
+		}
+#endif		
+	}
+
+//	spin_lock_irqsave(&priv->lock,flags);
+	spin_lock_irqsave(&priv->rx_lock,flags);
+
+	tmp = r1000_rx_config | rx_mode | (RTL_R32(RxConfig) & rtl_chip_info[priv->chipset].RxConfigMask);
+
+	RTL_W32 ( RxConfig, tmp);
+	if((priv->mcfg==MCFG_METHOD_11)||(priv->mcfg==MCFG_METHOD_12)||
+	   (priv->mcfg==MCFG_METHOD_13)||(priv->mcfg==MCFG_METHOD_14)||
+	   (priv->mcfg==MCFG_METHOD_15)){
+		RTL_W32 ( MAR0 + 0, 0xFFFFFFFF);
+		RTL_W32 ( MAR0 + 4, 0xFFFFFFFF);
+	}else{
+		RTL_W32 ( MAR0 + 0, mc_filter[0]);
+		RTL_W32 ( MAR0 + 4, mc_filter[1]);
+	}
+
+//	spin_unlock_irqrestore(&priv->lock,flags);
+	spin_unlock_irqrestore(&priv->rx_lock,flags);
+
+}//end of r1000_set_rx_mode (struct net_device *netdev)
+
+struct net_device_stats *r1000_get_stats(struct net_device *netdev)
+
+{
+	struct r1000_private *priv = netdev->priv;
+
+    return &priv->stats;
+}
+
+static struct pci_driver r1000_pci_driver = {
+	name:		MODULENAME,
+	id_table:	r1000_pci_tbl,
+	probe:		r1000_init_one,
+	remove:		__devexit_p(r1000_remove_one),
+	suspend:	NULL,
+	resume:		NULL,
+};
+
+static int __init r1000_init_module (void)
+{
+	return pci_module_init (&r1000_pci_driver);	// pci_register_driver (drv)
+}
+
+static void __exit r1000_cleanup_module (void)
+{
+	pci_unregister_driver (&r1000_pci_driver);
+}
+
+#ifdef R1000_JUMBO_FRAME_SUPPORT
+static int r1000_change_mtu(struct net_device *netdev, int new_mtu)
+{
+	struct r1000_private *priv = netdev->priv;
+	unsigned long ioaddr = priv->ioaddr;
+
+	if( new_mtu > MAX_JUMBO_FRAME_MTU ){
+		printk("%s: Error -- new_mtu(%d) > MAX_JUMBO_FRAME_MTU(%d).\n", netdev->name, new_mtu, MAX_JUMBO_FRAME_MTU);
+		return -1;
+	}
+
+	netdev->mtu = new_mtu;
+
+	priv->curr_mtu_size = new_mtu;
+	priv->tx_pkt_len = new_mtu + ETH_HDR_LEN;
+	priv->rx_pkt_len = new_mtu + ETH_HDR_LEN;
+	priv->hw_rx_pkt_len = priv->rx_pkt_len + 8;
+
+	RTL_W8 ( Cfg9346, Cfg9346_Unlock);
+	RTL_W16	( RxMaxSize, (unsigned short)priv->hw_rx_pkt_len );
+	RTL_W8 ( Cfg9346, Cfg9346_Lock);
+
+	DBG_PRINT("-------------------------- \n");
+	DBG_PRINT("netdev->mtu = %d \n", netdev->mtu);
+	DBG_PRINT("priv->curr_mtu_size = %d \n", priv->curr_mtu_size);
+	DBG_PRINT("priv->rx_pkt_len = %d \n", priv->rx_pkt_len);
+	DBG_PRINT("priv->tx_pkt_len = %d \n", priv->tx_pkt_len);
+	DBG_PRINT("RTL_W16( RxMaxSize, %d )\n", priv->hw_rx_pkt_len);
+	DBG_PRINT("-------------------------- \n");
+
+	r1000_close(netdev);
+	r1000_open(netdev);
+
+	return 0;
+}
+#endif //end #ifdef R1000_JUMBO_FRAME_SUPPORT
+
+module_init(r1000_init_module);
+module_exit(r1000_cleanup_module);