path: root/packages/linux/linux-omap2-git/omap3evm/0003-ARM-OMAP-SmartReflex-driver.patch

From: Kalle Jokiniemi <ext-kalle.jokiniemi@nokia.com>
To: linux-omap@vger.kernel.org
Cc: Kalle Jokiniemi <ext-kalle.jokiniemi@nokia.com>
Subject: [PATCH 3/3] ARM: OMAP: SmartReflex driver: integration to linux-omap
Date: 	Fri,  6 Jun 2008 12:49:49 +0300
Message-Id: <1212745789-13926-3-git-send-email-ext-kalle.jokiniemi@nokia.com>

- Changed register accesses to use prm_{read,write}_mod_reg and
  prm_{set,clear,rmw}_mod_reg_bits() functions instread of
  "REG_X = REG_Y" type accesses.

- Changed direct register clock enables/disables to clockframework calls.

- replaced cpu-related #ifdefs with if (cpu_is_xxxx()) calls.

- Added E-fuse support: Use silicon characteristics parameters from E-fuse

- added smartreflex_disable/enable calls to pm34xx.c suspend function.

- Added "SmartReflex support" entry into Kconfig under "System type->TI OMAP
  Implementations". It depends on ARCH_OMAP34XX and TWL4030_CORE.

- Added "SmartReflex testing support" Kconfig option for using hard coded
  software parameters instead of E-fuse parameters.

Signed-off-by: Kalle Jokiniemi <ext-kalle.jokiniemi@nokia.com>
---
 arch/arm/mach-omap2/Makefile      |    3 +
 arch/arm/mach-omap2/pm34xx.c      |    9 +
 arch/arm/mach-omap2/smartreflex.c |  531 +++++++++++++++++++++++--------------
 arch/arm/mach-omap2/smartreflex.h |    9 +-
 arch/arm/plat-omap/Kconfig        |   31 +++
 5 files changed, 385 insertions(+), 198 deletions(-)

diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 50c6657..f645b6e 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -25,6 +25,9 @@ obj-$(CONFIG_ARCH_OMAP3)		+= pm34xx.o sleep34xx.o
 obj-$(CONFIG_PM_DEBUG)			+= pm-debug.o
 endif
 
+# SmartReflex driver
+obj-$(CONFIG_OMAP_SMARTREFLEX)		+= smartreflex.o
+
 # Clock framework
 obj-$(CONFIG_ARCH_OMAP2)		+= clock24xx.o
 obj-$(CONFIG_ARCH_OMAP3)		+= clock34xx.o
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 7e775cc..3da4f47 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -36,6 +36,7 @@
 
 #include "prm.h"
 #include "pm.h"
+#include "smartreflex.h"
 
 struct power_state {
 	struct powerdomain *pwrdm;
@@ -256,6 +257,10 @@ static int omap3_pm_suspend(void)
 	struct power_state *pwrst;
 	int state, ret = 0;
 
+	/* XXX Disable smartreflex before entering suspend */
+	disable_smartreflex(SR1);
+	disable_smartreflex(SR2);
+
 	/* Read current next_pwrsts */
 	list_for_each_entry(pwrst, &pwrst_list, node)
 		pwrst->saved_state = pwrdm_read_next_pwrst(pwrst->pwrdm);
@@ -287,6 +292,10 @@ restore:
 		printk(KERN_INFO "Successfully put all powerdomains "
 		       "to target state\n");
 
+	/* XXX Enable smartreflex after suspend */
+	enable_smartreflex(SR1);
+	enable_smartreflex(SR2);
+
 	return ret;
 }
 
diff --git a/arch/arm/mach-omap2/smartreflex.c b/arch/arm/mach-omap2/smartreflex.c
index dae7460..0b10a5d 100644
--- a/arch/arm/mach-omap2/smartreflex.c
+++ b/arch/arm/mach-omap2/smartreflex.c
@@ -3,6 +3,9 @@
  *
  * OMAP34XX SmartReflex Voltage Control
  *
+ * Copyright (C) 2008 Nokia Corporation
+ * Kalle Jokiniemi
+ *
  * Copyright (C) 2007 Texas Instruments, Inc.
  * Lesly A M <x0080970@ti.com>
  *
@@ -20,13 +23,16 @@
 #include <linux/err.h>
 #include <linux/clk.h>
 #include <linux/sysfs.h>
-
-#include <asm/arch/prcm.h>
-#include <asm/arch/power_companion.h>
+#include <linux/kobject.h>
+#include <linux/i2c/twl4030.h>
 #include <linux/io.h>
 
-#include "prcm-regs.h"
+#include <asm/arch/omap34xx.h>
+#include <asm/arch/control.h>
+
+#include "prm.h"
 #include "smartreflex.h"
+#include "prm-regbits-34xx.h"
 
 
 /* #define DEBUG_SR 1 */
@@ -37,11 +43,16 @@
 #  define DPRINTK(fmt, args...)
 #endif
 
+/* XXX: These should be relocated where-ever the OPP implementation will be */
+u32 current_vdd1_opp;
+u32 current_vdd2_opp;
+
 struct omap_sr{
 	int srid;
 	int is_sr_reset;
 	int is_autocomp_active;
 	struct clk *fck;
+	u32 clk_length;
 	u32 req_opp_no;
 	u32 opp1_nvalue, opp2_nvalue, opp3_nvalue, opp4_nvalue, opp5_nvalue;
 	u32 senp_mod, senn_mod;
@@ -53,6 +64,7 @@ static struct omap_sr sr1 = {
 	.srid = SR1,
 	.is_sr_reset = 1,
 	.is_autocomp_active = 0,
+	.clk_length = 0,
 	.srbase_addr = OMAP34XX_SR1_BASE,
 };
 
@@ -60,6 +72,7 @@ static struct omap_sr sr2 = {
 	.srid = SR2,
 	.is_sr_reset = 1,
 	.is_autocomp_active = 0,
+	.clk_length = 0,
 	.srbase_addr = OMAP34XX_SR2_BASE,
 };
 
@@ -85,8 +98,6 @@ static inline u32 sr_read_reg(struct omap_sr *sr, int offset)
 	return omap_readl(sr->srbase_addr + offset);
 }
 
-
-#ifndef USE_EFUSE_VALUES
 static void cal_reciprocal(u32 sensor, u32 *sengain, u32 *rnsen)
 {
 	u32 gn, rn, mul;
@@ -100,7 +111,21 @@ static void cal_reciprocal(u32 sensor, u32 *sengain, u32 *rnsen)
 		}
 	}
 }
-#endif
+
+static void sr_clk_get(struct omap_sr *sr)
+{
+	if (sr->srid == SR1) {
+		sr->fck = clk_get(NULL, "sr1_fck");
+		if (IS_ERR(sr->fck))
+			printk(KERN_ERR "Could not get sr1_fck\n");
+
+	} else if (sr->srid == SR2) {
+		sr->fck = clk_get(NULL, "sr2_fck");
+		if (IS_ERR(sr->fck))
+			printk(KERN_ERR "Could not get sr2_fck\n");
+
+	}
+}
 
 static int sr_clk_enable(struct omap_sr *sr)
 {
@@ -131,22 +156,86 @@ static int sr_clk_disable(struct omap_sr *sr)
 	return 0;
 }
 
-static void sr_set_nvalues(struct omap_sr *sr)
+static void sr_set_clk_length(struct omap_sr *sr)
+{
+	struct clk *osc_sys_ck;
+	u32 sys_clk = 0;
+
+	osc_sys_ck = clk_get(NULL, "osc_sys_ck");
+	sys_clk = clk_get_rate(osc_sys_ck);
+	clk_put(osc_sys_ck);
+
+	switch (sys_clk) {
+	case 12000000:
+		sr->clk_length = SRCLKLENGTH_12MHZ_SYSCLK;
+		break;
+	case 13000000:
+		sr->clk_length = SRCLKLENGTH_13MHZ_SYSCLK;
+		break;
+	case 19200000:
+		sr->clk_length = SRCLKLENGTH_19MHZ_SYSCLK;
+		break;
+	case 26000000:
+		sr->clk_length = SRCLKLENGTH_26MHZ_SYSCLK;
+		break;
+	case 38400000:
+		sr->clk_length = SRCLKLENGTH_38MHZ_SYSCLK;
+		break;
+	default :
+		printk(KERN_ERR "Invalid sysclk value: %d\n", sys_clk);
+		break;
+	}
+}
+
+static void sr_set_efuse_nvalues(struct omap_sr *sr)
+{
+	if (sr->srid == SR1) {
+		sr->senn_mod = (omap_ctrl_readl(OMAP343X_CONTROL_FUSE_SR) &
+					OMAP343X_SR1_SENNENABLE_MASK) >>
+					OMAP343X_SR1_SENNENABLE_SHIFT;
+
+		sr->senp_mod = (omap_ctrl_readl(OMAP343X_CONTROL_FUSE_SR) &
+					OMAP343X_SR1_SENPENABLE_MASK) >>
+					OMAP343X_SR1_SENPENABLE_SHIFT;
+
+		sr->opp5_nvalue = omap_ctrl_readl(
+					OMAP343X_CONTROL_FUSE_OPP5_VDD1);
+		sr->opp4_nvalue = omap_ctrl_readl(
+					OMAP343X_CONTROL_FUSE_OPP4_VDD1);
+		sr->opp3_nvalue = omap_ctrl_readl(
+					OMAP343X_CONTROL_FUSE_OPP3_VDD1);
+		sr->opp2_nvalue = omap_ctrl_readl(
+					OMAP343X_CONTROL_FUSE_OPP2_VDD1);
+		sr->opp1_nvalue = omap_ctrl_readl(
+					OMAP343X_CONTROL_FUSE_OPP1_VDD1);
+	} else if (sr->srid == SR2) {
+		sr->senn_mod = (omap_ctrl_readl(OMAP343X_CONTROL_FUSE_SR) &
+					OMAP343X_SR2_SENNENABLE_MASK) >>
+					OMAP343X_SR2_SENNENABLE_SHIFT;
+
+		sr->senp_mod = (omap_ctrl_readl(OMAP343X_CONTROL_FUSE_SR) &
+					OMAP343X_SR2_SENPENABLE_MASK) >>
+					OMAP343X_SR2_SENPENABLE_SHIFT;
+
+		sr->opp3_nvalue = omap_ctrl_readl(
+					OMAP343X_CONTROL_FUSE_OPP3_VDD2);
+		sr->opp2_nvalue = omap_ctrl_readl(
+					OMAP343X_CONTROL_FUSE_OPP2_VDD2);
+		sr->opp1_nvalue = omap_ctrl_readl(
+					OMAP343X_CONTROL_FUSE_OPP1_VDD2);
+	}
+}
+
+/* Hard coded nvalues for testing purposes, may cause device to hang! */
+static void sr_set_testing_nvalues(struct omap_sr *sr)
 {
-#ifdef USE_EFUSE_VALUES
-	u32 n1, n2;
-#else
 	u32 senpval, sennval;
 	u32 senpgain, senngain;
 	u32 rnsenp, rnsenn;
-#endif
 
 	if (sr->srid == SR1) {
-#ifdef USE_EFUSE_VALUES
-		/* Read values for VDD1 from EFUSE */
-#else
-		/* since E-Fuse Values are not available, calculating the
-		 * reciprocal of the SenN and SenP values for SR1
+		/* Calculating the reciprocal of the SenN and SenP values
+		 * for SR1
 		 */
 		sr->senp_mod = 0x03;        /* SenN-M5 enabled */
 		sr->senn_mod = 0x03;
@@ -216,15 +305,16 @@ static void sr_set_nvalues(struct omap_sr *sr)
 				(rnsenp << NVALUERECIPROCAL_RNSENP_SHIFT) |
 				(rnsenn << NVALUERECIPROCAL_RNSENN_SHIFT));
 
+		/* XXX The clocks are enabled in the startup and NVALUE is
+		 * set also there. Disabling this for now, but this could
+		 * be related to dynamic sleep during boot */
+#if 0
 		sr_clk_enable(sr);
 		sr_write_reg(sr, NVALUERECIPROCAL, sr->opp3_nvalue);
 		sr_clk_disable(sr);
-
 #endif
+
 	} else if (sr->srid == SR2) {
-#ifdef USE_EFUSE_VALUES
-		/* Read values for VDD2 from EFUSE */
-#else
 		/* since E-Fuse Values are not available, calculating the
 		 * reciprocal of the SenN and SenP values for SR2
 		 */
@@ -269,134 +359,163 @@ static void sr_set_nvalues(struct omap_sr *sr)
 				(senngain << NVALUERECIPROCAL_SENNGAIN_SHIFT) |
 				(rnsenp << NVALUERECIPROCAL_RNSENP_SHIFT) |
 				(rnsenn << NVALUERECIPROCAL_RNSENN_SHIFT));
-
-#endif
 	}
 
 }
 
+static void sr_set_nvalues(struct omap_sr *sr)
+{
+	if (SR_TESTING_NVALUES)
+		sr_set_testing_nvalues(sr);
+	else
+		sr_set_efuse_nvalues(sr);
+}
+
 static void sr_configure_vp(int srid)
 {
 	u32 vpconfig;
 
 	if (srid == SR1) {
 		vpconfig = PRM_VP1_CONFIG_ERROROFFSET | PRM_VP1_CONFIG_ERRORGAIN
-			| PRM_VP1_CONFIG_INITVOLTAGE | PRM_VP1_CONFIG_TIMEOUTEN;
-
-		PRM_VP1_CONFIG = vpconfig;
-		PRM_VP1_VSTEPMIN = PRM_VP1_VSTEPMIN_SMPSWAITTIMEMIN |
-						PRM_VP1_VSTEPMIN_VSTEPMIN;
-
-		PRM_VP1_VSTEPMAX = PRM_VP1_VSTEPMAX_SMPSWAITTIMEMAX |
-						PRM_VP1_VSTEPMAX_VSTEPMAX;
-
-		PRM_VP1_VLIMITTO = PRM_VP1_VLIMITTO_VDDMAX |
-			PRM_VP1_VLIMITTO_VDDMIN | PRM_VP1_VLIMITTO_TIMEOUT;
-
-		PRM_VP1_CONFIG |= PRM_VP1_CONFIG_INITVDD;
-		PRM_VP1_CONFIG &= ~PRM_VP1_CONFIG_INITVDD;
+					| PRM_VP1_CONFIG_INITVOLTAGE
+					| PRM_VP1_CONFIG_TIMEOUTEN;
+
+		prm_write_mod_reg(vpconfig, OMAP3430_GR_MOD,
+					OMAP3_PRM_VP1_CONFIG_OFFSET);
+		prm_write_mod_reg(PRM_VP1_VSTEPMIN_SMPSWAITTIMEMIN |
+					PRM_VP1_VSTEPMIN_VSTEPMIN,
+					OMAP3430_GR_MOD,
+					OMAP3_PRM_VP1_VSTEPMIN_OFFSET);
+
+		prm_write_mod_reg(PRM_VP1_VSTEPMAX_SMPSWAITTIMEMAX |
+					PRM_VP1_VSTEPMAX_VSTEPMAX,
+					OMAP3430_GR_MOD,
+					OMAP3_PRM_VP1_VSTEPMAX_OFFSET);
+
+		prm_write_mod_reg(PRM_VP1_VLIMITTO_VDDMAX |
+					PRM_VP1_VLIMITTO_VDDMIN |
+					PRM_VP1_VLIMITTO_TIMEOUT,
+					OMAP3430_GR_MOD,
+					OMAP3_PRM_VP1_VLIMITTO_OFFSET);
+
+		/* Trigger initVDD value copy to voltage processor */
+		prm_set_mod_reg_bits(PRM_VP1_CONFIG_INITVDD, OMAP3430_GR_MOD,
+					OMAP3_PRM_VP1_CONFIG_OFFSET);
+		/* Clear initVDD copy trigger bit */
+		prm_clear_mod_reg_bits(PRM_VP1_CONFIG_INITVDD, OMAP3430_GR_MOD,
+					OMAP3_PRM_VP1_CONFIG_OFFSET);
 
 	} else if (srid == SR2) {
 		vpconfig = PRM_VP2_CONFIG_ERROROFFSET | PRM_VP2_CONFIG_ERRORGAIN
-			| PRM_VP2_CONFIG_INITVOLTAGE | PRM_VP2_CONFIG_TIMEOUTEN;
-
-		PRM_VP2_CONFIG = vpconfig;
-		PRM_VP2_VSTEPMIN = PRM_VP2_VSTEPMIN_SMPSWAITTIMEMIN |
-						PRM_VP2_VSTEPMIN_VSTEPMIN;
-
-		PRM_VP2_VSTEPMAX = PRM_VP2_VSTEPMAX_SMPSWAITTIMEMAX |
-						PRM_VP2_VSTEPMAX_VSTEPMAX;
-
-		PRM_VP2_VLIMITTO = PRM_VP2_VLIMITTO_VDDMAX |
-			PRM_VP2_VLIMITTO_VDDMIN | PRM_VP2_VLIMITTO_TIMEOUT;
-
-		PRM_VP2_CONFIG |= PRM_VP2_CONFIG_INITVDD;
-		PRM_VP2_CONFIG &= ~PRM_VP2_CONFIG_INITVDD;
+					| PRM_VP2_CONFIG_INITVOLTAGE
+					| PRM_VP2_CONFIG_TIMEOUTEN;
+
+		prm_write_mod_reg(vpconfig, OMAP3430_GR_MOD,
+					OMAP3_PRM_VP2_CONFIG_OFFSET);
+		prm_write_mod_reg(PRM_VP2_VSTEPMIN_SMPSWAITTIMEMIN |
+					PRM_VP2_VSTEPMIN_VSTEPMIN,
+					OMAP3430_GR_MOD,
+					OMAP3_PRM_VP2_VSTEPMIN_OFFSET);
+
+		prm_write_mod_reg(PRM_VP2_VSTEPMAX_SMPSWAITTIMEMAX |
+					PRM_VP2_VSTEPMAX_VSTEPMAX,
+					OMAP3430_GR_MOD,
+					OMAP3_PRM_VP2_VSTEPMAX_OFFSET);
+
+		prm_write_mod_reg(PRM_VP2_VLIMITTO_VDDMAX |
+					PRM_VP2_VLIMITTO_VDDMIN |
+					PRM_VP2_VLIMITTO_TIMEOUT,
+					OMAP3430_GR_MOD,
+					OMAP3_PRM_VP2_VLIMITTO_OFFSET);
+
+		/* Trigger initVDD value copy to voltage processor */
+		prm_set_mod_reg_bits(PRM_VP2_CONFIG_INITVDD, OMAP3430_GR_MOD,
+					OMAP3_PRM_VP2_CONFIG_OFFSET);
+		/* Reset initVDD copy trigger bit */
+		prm_clear_mod_reg_bits(PRM_VP2_CONFIG_INITVDD, OMAP3430_GR_MOD,
+					OMAP3_PRM_VP2_CONFIG_OFFSET);
 
 	}
 }
 
 static void sr_configure_vc(void)
 {
-	PRM_VC_SMPS_SA =
-		(R_SRI2C_SLAVE_ADDR << PRM_VC_SMPS_SA1_SHIFT) |
-		(R_SRI2C_SLAVE_ADDR << PRM_VC_SMPS_SA0_SHIFT);
-
-	PRM_VC_SMPS_VOL_RA = (R_VDD2_SR_CONTROL << PRM_VC_SMPS_VOLRA1_SHIFT) |
-				(R_VDD1_SR_CONTROL << PRM_VC_SMPS_VOLRA0_SHIFT);
-
-	PRM_VC_CMD_VAL_0 = (PRM_VC_CMD_VAL0_ON << PRM_VC_CMD_ON_SHIFT) |
-			(PRM_VC_CMD_VAL0_ONLP << PRM_VC_CMD_ONLP_SHIFT) |
-			(PRM_VC_CMD_VAL0_RET << PRM_VC_CMD_RET_SHIFT) |
-			(PRM_VC_CMD_VAL0_OFF << PRM_VC_CMD_OFF_SHIFT);
-
-	PRM_VC_CMD_VAL_1 = (PRM_VC_CMD_VAL1_ON << PRM_VC_CMD_ON_SHIFT) |
-			(PRM_VC_CMD_VAL1_ONLP << PRM_VC_CMD_ONLP_SHIFT) |
-			(PRM_VC_CMD_VAL1_RET << PRM_VC_CMD_RET_SHIFT) |
-			(PRM_VC_CMD_VAL1_OFF << PRM_VC_CMD_OFF_SHIFT);
-
-	PRM_VC_CH_CONF = PRM_VC_CH_CONF_CMD1 | PRM_VC_CH_CONF_RAV1;
-
-	PRM_VC_I2C_CFG = PRM_VC_I2C_CFG_MCODE | PRM_VC_I2C_CFG_HSEN
-							| PRM_VC_I2C_CFG_SREN;
+	prm_write_mod_reg((R_SRI2C_SLAVE_ADDR << OMAP3430_SMPS_SA1_SHIFT) |
+			(R_SRI2C_SLAVE_ADDR << OMAP3430_SMPS_SA0_SHIFT),
+			OMAP3430_GR_MOD, OMAP3_PRM_VC_SMPS_SA_OFFSET);
+
+	prm_write_mod_reg((R_VDD2_SR_CONTROL << OMAP3430_VOLRA1_SHIFT) |
+			(R_VDD1_SR_CONTROL << OMAP3430_VOLRA0_SHIFT),
+			OMAP3430_GR_MOD, OMAP3_PRM_VC_SMPS_VOL_RA_OFFSET);
+
+	prm_write_mod_reg((OMAP3430_VC_CMD_VAL0_ON <<
+		OMAP3430_VC_CMD_ON_SHIFT) |
+		(OMAP3430_VC_CMD_VAL0_ONLP << OMAP3430_VC_CMD_ONLP_SHIFT) |
+		(OMAP3430_VC_CMD_VAL0_RET << OMAP3430_VC_CMD_RET_SHIFT) |
+		(OMAP3430_VC_CMD_VAL0_OFF << OMAP3430_VC_CMD_OFF_SHIFT),
+		OMAP3430_GR_MOD, OMAP3_PRM_VC_CMD_VAL_0_OFFSET);
+
+	prm_write_mod_reg((OMAP3430_VC_CMD_VAL1_ON <<
+		OMAP3430_VC_CMD_ON_SHIFT) |
+		(OMAP3430_VC_CMD_VAL1_ONLP << OMAP3430_VC_CMD_ONLP_SHIFT) |
+		(OMAP3430_VC_CMD_VAL1_RET << OMAP3430_VC_CMD_RET_SHIFT) |
+		(OMAP3430_VC_CMD_VAL1_OFF << OMAP3430_VC_CMD_OFF_SHIFT),
+		OMAP3430_GR_MOD, OMAP3_PRM_VC_CMD_VAL_1_OFFSET);
+
+	prm_write_mod_reg(OMAP3430_CMD1 | OMAP3430_RAV1,
+				OMAP3430_GR_MOD,
+				OMAP3_PRM_VC_CH_CONF_OFFSET);
+
+	prm_write_mod_reg(OMAP3430_MCODE_SHIFT | OMAP3430_HSEN | OMAP3430_SREN,
+				OMAP3430_GR_MOD,
+				OMAP3_PRM_VC_I2C_CFG_OFFSET);
 
 	/* Setup voltctrl and other setup times */
+	/* XXX CONFIG_SYSOFFMODE has not been implemented yet */
 #ifdef CONFIG_SYSOFFMODE
-	PRM_VOLTCTRL = PRM_VOLTCTRL_AUTO_OFF | PRM_VOLTCTRL_AUTO_RET;
-	PRM_CLKSETUP = PRM_CLKSETUP_DURATION;
-	PRM_VOLTSETUP1 = (PRM_VOLTSETUP_TIME2 << PRM_VOLTSETUP_TIME2_OFFSET) |
-			(PRM_VOLTSETUP_TIME1 << PRM_VOLTSETUP_TIME1_OFFSET);
-	PRM_VOLTOFFSET = PRM_VOLTOFFSET_DURATION;
-	PRM_VOLTSETUP2 = PRM_VOLTSETUP2_DURATION;
+	prm_write_mod_reg(OMAP3430_AUTO_OFF | OMAP3430_AUTO_RET,
+			OMAP3430_GR_MOD,
+			OMAP3_PRM_VOLTCTRL_OFFSET);
+
+	prm_write_mod_reg(OMAP3430_CLKSETUP_DURATION, OMAP3430_GR_MOD,
+			OMAP3_PRM_CLKSETUP_OFFSET);
+	prm_write_mod_reg((OMAP3430_VOLTSETUP_TIME2 <<
+			OMAP3430_VOLTSETUP_TIME2_OFFSET) |
+			(OMAP3430_VOLTSETUP_TIME1 <<
+			OMAP3430_VOLTSETUP_TIME1_OFFSET),
+			OMAP3430_GR_MOD, OMAP3_PRM_VOLTSETUP1_OFFSET);
+
+	prm_write_mod_reg(OMAP3430_VOLTOFFSET_DURATION, OMAP3430_GR_MOD,
+			OMAP3_PRM_VOLTOFFSET_OFFSET);
+	prm_write_mod_reg(OMAP3430_VOLTSETUP2_DURATION, OMAP3430_GR_MOD,
+			OMAP3_PRM_VOLTSETUP2_OFFSET);
 #else
-	PRM_VOLTCTRL |= PRM_VOLTCTRL_AUTO_RET;
+	prm_set_mod_reg_bits(OMAP3430_AUTO_RET, OMAP3430_GR_MOD,
+			OMAP3_PRM_VOLTCTRL_OFFSET);
 #endif
 
 }
 
-
 static void sr_configure(struct omap_sr *sr)
 {
-	u32 sys_clk, sr_clk_length = 0;
 	u32 sr_config;
 	u32 senp_en , senn_en;
 
+	if (sr->clk_length == 0)
+		sr_set_clk_length(sr);
+
 	senp_en = sr->senp_mod;
 	senn_en = sr->senn_mod;
-
-	sys_clk = prcm_get_system_clock_speed();
-
-	switch (sys_clk) {
-	case 12000:
-		sr_clk_length = SRCLKLENGTH_12MHZ_SYSCLK;
-		break;
-	case 13000:
-		sr_clk_length = SRCLKLENGTH_13MHZ_SYSCLK;
-		break;
-	case 19200:
-		sr_clk_length = SRCLKLENGTH_19MHZ_SYSCLK;
-		break;
-	case 26000:
-		sr_clk_length = SRCLKLENGTH_26MHZ_SYSCLK;
-		break;
-	case 38400:
-		sr_clk_length = SRCLKLENGTH_38MHZ_SYSCLK;
-		break;
-	default :
-		printk(KERN_ERR "Invalid sysclk value\n");
-		break;
-	}
-
-	DPRINTK(KERN_DEBUG "SR : sys clk %lu\n", sys_clk);
 	if (sr->srid == SR1) {
 		sr_config = SR1_SRCONFIG_ACCUMDATA |
-			(sr_clk_length << SRCONFIG_SRCLKLENGTH_SHIFT) |
+			(sr->clk_length << SRCONFIG_SRCLKLENGTH_SHIFT) |
 			SRCONFIG_SENENABLE | SRCONFIG_ERRGEN_EN |
 			SRCONFIG_MINMAXAVG_EN |
 			(senn_en << SRCONFIG_SENNENABLE_SHIFT) |
 			(senp_en << SRCONFIG_SENPENABLE_SHIFT) |
 			SRCONFIG_DELAYCTRL;
-
+		DPRINTK(KERN_DEBUG "setting SRCONFIG1 to 0x%08lx\n",
+						(unsigned long int) sr_config);
 		sr_write_reg(sr, SRCONFIG, sr_config);
 
 		sr_write_reg(sr, AVGWEIGHT, SR1_AVGWEIGHT_SENPAVGWEIGHT |
@@ -408,18 +527,18 @@ static void sr_configure(struct omap_sr *sr)
 
 	} else if (sr->srid == SR2) {
 		sr_config = SR2_SRCONFIG_ACCUMDATA |
-			(sr_clk_length << SRCONFIG_SRCLKLENGTH_SHIFT) |
+			(sr->clk_length << SRCONFIG_SRCLKLENGTH_SHIFT) |
 			SRCONFIG_SENENABLE | SRCONFIG_ERRGEN_EN |
 			SRCONFIG_MINMAXAVG_EN |
 			(senn_en << SRCONFIG_SENNENABLE_SHIFT) |
 			(senp_en << SRCONFIG_SENPENABLE_SHIFT) |
 			SRCONFIG_DELAYCTRL;
 
+		DPRINTK(KERN_DEBUG "setting SRCONFIG2 to 0x%08lx\n",
+						(unsigned long int) sr_config);
 		sr_write_reg(sr, SRCONFIG, sr_config);
-
 		sr_write_reg(sr, AVGWEIGHT, SR2_AVGWEIGHT_SENPAVGWEIGHT |
 					SR2_AVGWEIGHT_SENNAVGWEIGHT);
-
 		sr_modify_reg(sr, ERRCONFIG, (SR_ERRWEIGHT_MASK |
 			SR_ERRMAXLIMIT_MASK | SR_ERRMINLIMIT_MASK),
 			(SR2_ERRWEIGHT | SR2_ERRMAXLIMIT | SR2_ERRMINLIMIT));
@@ -428,9 +547,9 @@ static void sr_configure(struct omap_sr *sr)
 	sr->is_sr_reset = 0;
 }
 
-static void sr_enable(struct omap_sr *sr, u32 target_opp_no)
+static int sr_enable(struct omap_sr *sr, u32 target_opp_no)
 {
-	u32 nvalue_reciprocal, current_nvalue;
+	u32 nvalue_reciprocal;
 
 	sr->req_opp_no = target_opp_no;
 
@@ -472,11 +591,10 @@ static void sr_enable(struct omap_sr *sr, u32 target_opp_no)
 		}
 	}
 
-	current_nvalue = sr_read_reg(sr, NVALUERECIPROCAL);
-
-	if (current_nvalue == nvalue_reciprocal) {
-		DPRINTK("System is already at the desired voltage level\n");
-		return;
+	if (nvalue_reciprocal == 0) {
+		printk(KERN_NOTICE "OPP%d doesn't support SmartReflex\n",
+								target_opp_no);
+		return SR_FALSE;
 	}
 
 	sr_write_reg(sr, NVALUERECIPROCAL, nvalue_reciprocal);
@@ -485,18 +603,19 @@ static void sr_enable(struct omap_sr *sr, u32 target_opp_no)
 	sr_modify_reg(sr, ERRCONFIG,
 			(ERRCONFIG_VPBOUNDINTEN | ERRCONFIG_VPBOUNDINTST),
 			(ERRCONFIG_VPBOUNDINTEN | ERRCONFIG_VPBOUNDINTST));
-
 	if (sr->srid == SR1) {
 		/* Enable VP1 */
-		PRM_VP1_CONFIG |= PRM_VP1_CONFIG_VPENABLE;
+		prm_set_mod_reg_bits(PRM_VP1_CONFIG_VPENABLE, OMAP3430_GR_MOD,
+				OMAP3_PRM_VP1_CONFIG_OFFSET);
 	} else if (sr->srid == SR2) {
 		/* Enable VP2 */
-		PRM_VP2_CONFIG |= PRM_VP2_CONFIG_VPENABLE;
+		prm_set_mod_reg_bits(PRM_VP2_CONFIG_VPENABLE, OMAP3430_GR_MOD,
+				OMAP3_PRM_VP2_CONFIG_OFFSET);
 	}
 
 	/* SRCONFIG - enable SR */
 	sr_modify_reg(sr, SRCONFIG, SRCONFIG_SRENABLE, SRCONFIG_SRENABLE);
-
+	return SR_TRUE;
 }
 
 static void sr_disable(struct omap_sr *sr)
@@ -507,11 +626,13 @@ static void sr_disable(struct omap_sr *sr)
 	sr_modify_reg(sr, SRCONFIG, SRCONFIG_SRENABLE, ~SRCONFIG_SRENABLE);
 
 	if (sr->srid == SR1) {
-		/* Enable VP1 */
-		PRM_VP1_CONFIG &= ~PRM_VP1_CONFIG_VPENABLE;
+		/* Disable VP1 */
+		prm_clear_mod_reg_bits(PRM_VP1_CONFIG_VPENABLE, OMAP3430_GR_MOD,
+					OMAP3_PRM_VP1_CONFIG_OFFSET);
 	} else if (sr->srid == SR2) {
-		/* Enable VP2 */
-		PRM_VP2_CONFIG &= ~PRM_VP2_CONFIG_VPENABLE;
+		/* Disable VP2 */
+		prm_clear_mod_reg_bits(PRM_VP2_CONFIG_VPENABLE, OMAP3430_GR_MOD,
+					OMAP3_PRM_VP2_CONFIG_OFFSET);
 	}
 }
 
@@ -535,7 +656,12 @@ void sr_start_vddautocomap(int srid, u32 target_opp_no)
 									srid);
 
 	sr->is_autocomp_active = 1;
-	sr_enable(sr, target_opp_no);
+	if (!sr_enable(sr, target_opp_no)) {
+		printk(KERN_WARNING "SR%d: VDD autocomp not activated\n", srid);
+		sr->is_autocomp_active = 0;
+		if (sr->is_sr_reset == 1)
+			sr_clk_disable(sr);
+	}
 }
 EXPORT_SYMBOL(sr_start_vddautocomap);
 
@@ -574,20 +700,18 @@ void enable_smartreflex(int srid)
 
 	if (sr->is_autocomp_active == 1) {
 		if (sr->is_sr_reset == 1) {
-			if (srid == SR1) {
-				/* Enable SR clks */
-				CM_FCLKEN_WKUP |= SR1_CLK_ENABLE;
-				target_opp_no = get_opp_no(current_vdd1_opp);
+			/* Enable SR clks */
+			sr_clk_enable(sr);
 
-			} else if (srid == SR2) {
-				/* Enable SR clks */
-				CM_FCLKEN_WKUP |= SR2_CLK_ENABLE;
+			if (srid == SR1)
+				target_opp_no = get_opp_no(current_vdd1_opp);
+			else if (srid == SR2)
 				target_opp_no = get_opp_no(current_vdd2_opp);
-			}
 
 			sr_configure(sr);
 
-			sr_enable(sr, target_opp_no);
+			if (!sr_enable(sr, target_opp_no))
+				sr_clk_disable(sr);
 		}
 	}
 }
@@ -602,15 +726,6 @@ void disable_smartreflex(int srid)
 		sr = &sr2;
 
 	if (sr->is_autocomp_active == 1) {
-		if (srid == SR1) {
-			/* Enable SR clk */
-			CM_FCLKEN_WKUP |= SR1_CLK_ENABLE;
-
-		} else if (srid == SR2) {
-			/* Enable SR clk */
-			CM_FCLKEN_WKUP |= SR2_CLK_ENABLE;
-		}
-
 		if (sr->is_sr_reset == 0) {
 
 			sr->is_sr_reset = 1;
@@ -618,17 +733,18 @@ void disable_smartreflex(int srid)
 			sr_modify_reg(sr, SRCONFIG, SRCONFIG_SRENABLE,
 							~SRCONFIG_SRENABLE);
 
+			/* Disable SR clk */
+			sr_clk_disable(sr);
 			if (sr->srid == SR1) {
-				/* Disable SR clk */
-				CM_FCLKEN_WKUP &= ~SR1_CLK_ENABLE;
-				/* Enable VP1 */
-				PRM_VP1_CONFIG &= ~PRM_VP1_CONFIG_VPENABLE;
-
+				/* Disable VP1 */
+				prm_clear_mod_reg_bits(PRM_VP1_CONFIG_VPENABLE,
+						OMAP3430_GR_MOD,
+						OMAP3_PRM_VP1_CONFIG_OFFSET);
 			} else if (sr->srid == SR2) {
-				/* Disable SR clk */
-				CM_FCLKEN_WKUP &= ~SR2_CLK_ENABLE;
-				/* Enable VP2 */
-				PRM_VP2_CONFIG &= ~PRM_VP2_CONFIG_VPENABLE;
+				/* Disable VP2 */
+				prm_clear_mod_reg_bits(PRM_VP2_CONFIG_VPENABLE,
+						OMAP3430_GR_MOD,
+						OMAP3_PRM_VP2_CONFIG_OFFSET);
 			}
 		}
 	}
@@ -638,7 +754,6 @@ void disable_smartreflex(int srid)
 /* Voltage Scaling using SR VCBYPASS */
 int sr_voltagescale_vcbypass(u32 target_opp, u8 vsel)
 {
-	int ret;
 	int sr_status = 0;
 	u32 vdd, target_opp_no;
 	u32 vc_bypass_value;
@@ -651,39 +766,53 @@ int sr_voltagescale_vcbypass(u32 target_opp, u8 vsel)
 	if (vdd == PRCM_VDD1) {
 		sr_status = sr_stop_vddautocomap(SR1);
 
-		PRM_VC_CMD_VAL_0 = (PRM_VC_CMD_VAL_0 & ~PRM_VC_CMD_ON_MASK) |
-						(vsel << PRM_VC_CMD_ON_SHIFT);
+		prm_rmw_mod_reg_bits(OMAP3430_VC_CMD_ON_MASK,
+					(vsel << OMAP3430_VC_CMD_ON_SHIFT),
+					OMAP3430_GR_MOD,
+					OMAP3_PRM_VC_CMD_VAL_0_OFFSET);
 		reg_addr = R_VDD1_SR_CONTROL;
 
 	} else if (vdd == PRCM_VDD2) {
 		sr_status = sr_stop_vddautocomap(SR2);
 
-		PRM_VC_CMD_VAL_1 = (PRM_VC_CMD_VAL_1 & ~PRM_VC_CMD_ON_MASK) |
-						(vsel << PRM_VC_CMD_ON_SHIFT);
+		prm_rmw_mod_reg_bits(OMAP3430_VC_CMD_ON_MASK,
+					(vsel << OMAP3430_VC_CMD_ON_SHIFT),
+					OMAP3430_GR_MOD,
+					OMAP3_PRM_VC_CMD_VAL_1_OFFSET);
 		reg_addr = R_VDD2_SR_CONTROL;
 	}
 
-	vc_bypass_value = (vsel << PRM_VC_BYPASS_DATA_SHIFT) |
-			(reg_addr << PRM_VC_BYPASS_REGADDR_SHIFT) |
-			(R_SRI2C_SLAVE_ADDR << PRM_VC_BYPASS_SLAVEADDR_SHIFT);
+	vc_bypass_value = (vsel << OMAP3430_DATA_SHIFT) |
+			(reg_addr << OMAP3430_REGADDR_SHIFT) |
+			(R_SRI2C_SLAVE_ADDR << OMAP3430_SLAVEADDR_SHIFT);
 
-	PRM_VC_BYPASS_VAL = vc_bypass_value;
+	prm_write_mod_reg(vc_bypass_value, OMAP3430_GR_MOD,
+			OMAP3_PRM_VC_BYPASS_VAL_OFFSET);
 
-	PRM_VC_BYPASS_VAL |= PRM_VC_BYPASS_VALID;
+	vc_bypass_value = prm_set_mod_reg_bits(OMAP3430_VALID, OMAP3430_GR_MOD,
+					OMAP3_PRM_VC_BYPASS_VAL_OFFSET);
 
-	DPRINTK("%s : PRM_VC_BYPASS_VAL %X\n", __func__, PRM_VC_BYPASS_VAL);
-	DPRINTK("PRM_IRQST_MPU %X\n", PRM_IRQSTATUS_MPU);
+	DPRINTK("%s : PRM_VC_BYPASS_VAL %X\n", __func__, vc_bypass_value);
+	DPRINTK("PRM_IRQST_MPU %X\n", prm_read_mod_reg(OCP_MOD,
+					OMAP3_PRM_IRQSTATUS_MPU_OFFSET));
 
-	while ((PRM_VC_BYPASS_VAL & PRM_VC_BYPASS_VALID) != 0x0) {
-		ret = loop_wait(&loop_cnt, &retries_cnt, 10);
-		if (ret != PRCM_PASS) {
+	while ((vc_bypass_value & OMAP3430_VALID) != 0x0) {
+		loop_cnt++;
+		if (retries_cnt > 10) {
 			printk(KERN_INFO "Loop count exceeded in check SR I2C"
 								"write\n");
-			return ret;
+			return SR_FAIL;
+		}
+		if (loop_cnt > 50) {
+			retries_cnt++;
+			loop_cnt = 0;
+			udelay(10);
 		}
+		vc_bypass_value = prm_read_mod_reg(OMAP3430_GR_MOD,
+					OMAP3_PRM_VC_BYPASS_VAL_OFFSET);
 	}
 
-	omap_udelay(T2_SMPS_UPDATE_DELAY);
+	udelay(T2_SMPS_UPDATE_DELAY);
 
 	if (sr_status) {
 		if (vdd == PRCM_VDD1)
@@ -696,13 +825,15 @@ int sr_voltagescale_vcbypass(u32 target_opp, u8 vsel)
 }
 
 /* Sysfs interface to select SR VDD1 auto compensation */
-static ssize_t omap_sr_vdd1_autocomp_show(struct kset *subsys, char *buf)
+static ssize_t omap_sr_vdd1_autocomp_show(struct kobject *kobj,
+					struct kobj_attribute *attr, char *buf)
 {
 	return sprintf(buf, "%d\n", sr1.is_autocomp_active);
 }
 
-static ssize_t omap_sr_vdd1_autocomp_store(struct kset *subsys,
-				const char *buf, size_t n)
+static ssize_t omap_sr_vdd1_autocomp_store(struct kobject *kobj,
+					struct kobj_attribute *attr,
+					const char *buf, size_t n)
 {
 	u32 current_vdd1opp_no;
 	unsigned short value;
@@ -722,7 +853,7 @@ static ssize_t omap_sr_vdd1_autocomp_store(struct kset *subsys,
 	return n;
 }
 
-static struct subsys_attribute sr_vdd1_autocomp = {
+static struct kobj_attribute sr_vdd1_autocomp = {
 	.attr = {
 	.name = __stringify(sr_vdd1_autocomp),
 	.mode = 0644,
@@ -732,13 +863,15 @@ static struct subsys_attribute sr_vdd1_autocomp = {
 };
 
 /* Sysfs interface to select SR VDD2 auto compensation */
-static ssize_t omap_sr_vdd2_autocomp_show(struct kset *subsys, char *buf)
+static ssize_t omap_sr_vdd2_autocomp_show(struct kobject *kobj,
+					struct kobj_attribute *attr, char *buf)
 {
 	return sprintf(buf, "%d\n", sr2.is_autocomp_active);
 }
 
-static ssize_t omap_sr_vdd2_autocomp_store(struct kset *subsys,
-				const char *buf, size_t n)
+static ssize_t omap_sr_vdd2_autocomp_store(struct kobject *kobj,
+					struct kobj_attribute *attr,
+					const char *buf, size_t n)
 {
 	u32 current_vdd2opp_no;
 	unsigned short value;
@@ -758,7 +891,7 @@ static ssize_t omap_sr_vdd2_autocomp_store(struct kset *subsys,
 	return n;
 }
 
-static struct subsys_attribute sr_vdd2_autocomp = {
+static struct kobj_attribute sr_vdd2_autocomp = {
 	.attr = {
 	.name = __stringify(sr_vdd2_autocomp),
 	.mode = 0644,
@@ -774,15 +907,19 @@ static int __init omap3_sr_init(void)
 	int ret = 0;
 	u8 RdReg;
 
-#ifdef CONFIG_ARCH_OMAP34XX
-	sr1.fck = clk_get(NULL, "sr1_fck");
-	if (IS_ERR(sr1.fck))
-		printk(KERN_ERR "Could not get sr1_fck\n");
-
-	sr2.fck = clk_get(NULL, "sr2_fck");
-	if (IS_ERR(sr2.fck))
-		printk(KERN_ERR "Could not get sr2_fck\n");
-#endif /* #ifdef CONFIG_ARCH_OMAP34XX */
+	if (is_sil_rev_greater_than(OMAP3430_REV_ES1_0)) {
+		current_vdd1_opp = PRCM_VDD1_OPP3;
+		current_vdd2_opp = PRCM_VDD2_OPP3;
+	} else {
+		current_vdd1_opp = PRCM_VDD1_OPP1;
+		current_vdd2_opp = PRCM_VDD1_OPP1;
+	}
+	if (cpu_is_omap34xx()) {
+		sr_clk_get(&sr1);
+		sr_clk_get(&sr2);
+	}
+	sr_set_clk_length(&sr1);
+	sr_set_clk_length(&sr2);
 
 	/* Call the VPConfig, VCConfig, set N Values. */
 	sr_set_nvalues(&sr1);
@@ -794,22 +931,24 @@ static int __init omap3_sr_init(void)
 	sr_configure_vc();
 
 	/* Enable SR on T2 */
-	ret = t2_in(PM_RECEIVER, &RdReg, R_DCDC_GLOBAL_CFG);
-	RdReg |= DCDC_GLOBAL_CFG_ENABLE_SRFLX;
-	ret |= t2_out(PM_RECEIVER, RdReg, R_DCDC_GLOBAL_CFG);
+	ret = twl4030_i2c_read_u8(TWL4030_MODULE_PM_RECEIVER, &RdReg,
+					R_DCDC_GLOBAL_CFG);
 
+	RdReg |= DCDC_GLOBAL_CFG_ENABLE_SRFLX;
+	ret |= twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, RdReg,
+					R_DCDC_GLOBAL_CFG);
 
 	printk(KERN_INFO "SmartReflex driver initialized\n");
 
-	ret = subsys_create_file(&power_subsys, &sr_vdd1_autocomp);
+	ret = sysfs_create_file(power_kobj, &sr_vdd1_autocomp.attr);
 	if (ret)
-		printk(KERN_ERR "subsys_create_file failed: %d\n", ret);
+		printk(KERN_ERR "sysfs_create_file failed: %d\n", ret);
 
-	ret = subsys_create_file(&power_subsys, &sr_vdd2_autocomp);
+	ret = sysfs_create_file(power_kobj, &sr_vdd2_autocomp.attr);
 	if (ret)
-		printk(KERN_ERR "subsys_create_file failed: %d\n", ret);
+		printk(KERN_ERR "sysfs_create_file failed: %d\n", ret);
 
 	return 0;
 }
 
-arch_initcall(omap3_sr_init);
+late_initcall(omap3_sr_init);
diff --git a/arch/arm/mach-omap2/smartreflex.h b/arch/arm/mach-omap2/smartreflex.h
index 2091a15..194429e 100644
--- a/arch/arm/mach-omap2/smartreflex.h
+++ b/arch/arm/mach-omap2/smartreflex.h
@@ -233,12 +233,18 @@
 extern u32 current_vdd1_opp;
 extern u32 current_vdd2_opp;
 
+#ifdef CONFIG_OMAP_SMARTREFLEX_TESTING
+#define SR_TESTING_NVALUES 	1
+#else
+#define SR_TESTING_NVALUES 	0
+#endif
+
 /*
  * Smartreflex module enable/disable interface.
  * NOTE: if smartreflex is not enabled from sysfs, these functions will not
  * do anything.
  */
-#if defined(CONFIG_ARCH_OMAP34XX) && defined(CONFIG_TWL4030_CORE)
+#ifdef CONFIG_OMAP_SMARTREFLEX
 void enable_smartreflex(int srid);
 void disable_smartreflex(int srid);
 #else
@@ -246,7 +252,6 @@ static inline void enable_smartreflex(int srid) {}
 static inline void disable_smartreflex(int srid) {}
 #endif
 
-
 #endif
 
 
diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
index b085b07..960c13f 100644
--- a/arch/arm/plat-omap/Kconfig
+++ b/arch/arm/plat-omap/Kconfig
@@ -56,6 +56,37 @@ config OMAP_DEBUG_CLOCKDOMAIN
 	  for every clockdomain register write.  However, the
 	  extra detail costs some memory.
 
+config OMAP_SMARTREFLEX
+	bool "SmartReflex support"
+	depends on ARCH_OMAP34XX && TWL4030_CORE
+	help
+	  Say Y if you want to enable SmartReflex.
+
+	  SmartReflex can perform continuous dynamic voltage
+	  scaling around the nominal operating point voltage
+	  according to silicon characteristics and operating
+	  conditions. Enabling SmartReflex reduces power
+	  consumption.
+
+	  Please note, that by default SmartReflex is only
+	  initialized. To enable the automatic voltage
+	  compensation for VDD1 and VDD2, user must write 1 to
+	  /sys/power/sr_vddX_autocomp, where X is 1 or 2.
+
+config OMAP_SMARTREFLEX_TESTING
+	bool "Smartreflex testing support"
+	depends on OMAP_SMARTREFLEX
+	default n
+	help
+	  Say Y if you want to enable SmartReflex testing with SW hardcoded
+	  NVALUES intead of E-fuse NVALUES set in factory silicon testing.
+
+	  In some devices the E-fuse values have not been set, even though
+	  SmartReflex modules are included. Using these hardcoded values set
+	  in software, one can test the SmartReflex features without E-fuse.
+
+	  WARNING: Enabling this option may cause your device to hang!
+
 config OMAP_RESET_CLOCKS
 	bool "Reset unused clocks during boot"
 	depends on ARCH_OMAP
-- 
1.5.4.3