path: root/packages/jpeg/jpeg-6b/debian.patch

#
# Made by http://www.mn-logistik.de/unsupported/pxa250/patcher
#

--- jpeg-6b/jpegtran.1~libjpeg6bb-5
+++ jpeg-6b/jpegtran.1
@@ -131,6 +131,24 @@
 .B \-rot 180 -trim
 trims both edges.
 .PP
+We also offer a lossless-crop option, which discards data outside a given
+image region but losslessly preserves what is inside.  Like the rotate and
+flip transforms, lossless crop is restricted by the JPEG format: the upper
+left corner of the selected region must fall on an iMCU boundary.  If this
+does not hold for the given crop parameters, we silently move the upper left
+corner up and/or left to make it so, simultaneously increasing the region
+dimensions to keep the lower right crop corner unchanged.  (Thus, the
+output image covers at least the requested region, but may cover more.)
+
+Note: lossless-crop is an enhancement from http://sylvana.net/jpegcrop/ 
+that may not be available on non-Debian systems.
+
+The image can be losslessly cropped by giving the switch:
+.TP
+.B \-crop WxH+X+Y
+Crop to a rectangular subarea of width W, height H starting at point X,Y.
+.PP
+.PP
 Another not-strictly-lossless transformation switch is:
 .TP
 .B \-grayscale
--- jpeg-6b/configure~libjpeg6bb-5
+++ jpeg-6b/configure
@@ -52,7 +52,7 @@
 includedir='${prefix}/include'
 oldincludedir='/usr/include'
 infodir='${prefix}/info'
-mandir='${prefix}/man'
+mandir='${prefix}/share/man'
 
 # Initialize some other variables.
 subdirs=
@@ -1559,7 +1559,8 @@
   if test "x$LTSTATIC" = xno; then
     disable_static="--disable-static"
   fi
-  $srcdir/ltconfig $disable_shared $disable_static $srcdir/ltmain.sh
+  chmod a+x $srcdir/ltconfig.new
+  $srcdir/ltconfig.new $disable_shared $disable_static $srcdir/ltmain.new.sh $host
 fi
 
 # Select memory manager depending on user input.
--- jpeg-6b/makefile.cfg~libjpeg6bb-5
+++ jpeg-6b/makefile.cfg
@@ -17,7 +17,7 @@
 binprefix =
 manprefix =
 manext = 1
-mandir = $(prefix)/man/man$(manext)
+mandir = $(prefix)/share/man/man$(manext)
 
 # The name of your C compiler:
 CC= @CC@
@@ -210,6 +210,11 @@
 	$(INSTALL_DATA) $(srcdir)/jpeglib.h $(includedir)/jpeglib.h
 	$(INSTALL_DATA) $(srcdir)/jmorecfg.h $(includedir)/jmorecfg.h
 	$(INSTALL_DATA) $(srcdir)/jerror.h $(includedir)/jerror.h
+#<ballombe@debian.org>:mjpegtools require this file to build and header say:
+# * These declarations are considered internal to the JPEG library; most
+# * applications using the library shouldn't need to include this file.
+# So it is not forbidden to use it, therefore it must be installed.
+	$(INSTALL_DATA) $(srcdir)/jpegint.h $(includedir)/jpegint.h
 
 clean:
 	$(RM) *.o *.lo libjpeg.a libjpeg.la
--- jpeg-6b/jpegtran.c~libjpeg6bb-5
+++ jpeg-6b/jpegtran.c
@@ -1,7 +1,7 @@
 /*
  * jpegtran.c
  *
- * Copyright (C) 1995-1997, Thomas G. Lane.
+ * Copyright (C) 1995-2001, Thomas G. Lane.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -64,6 +64,7 @@
 #endif
 #if TRANSFORMS_SUPPORTED
   fprintf(stderr, "Switches for modifying the image:\n");
+  fprintf(stderr, "  -crop WxH+X+Y  Crop to a rectangular subarea\n");
   fprintf(stderr, "  -grayscale     Reduce to grayscale (omit color data)\n");
   fprintf(stderr, "  -flip [horizontal|vertical]  Mirror image (left-right or top-bottom)\n");
   fprintf(stderr, "  -rotate [90|180|270]         Rotate image (degrees clockwise)\n");
@@ -134,6 +135,7 @@
   transformoption.transform = JXFORM_NONE;
   transformoption.trim = FALSE;
   transformoption.force_grayscale = FALSE;
+  transformoption.crop = FALSE;
   cinfo->err->trace_level = 0;
 
   /* Scan command line options, adjust parameters */
@@ -160,7 +162,7 @@
       exit(EXIT_FAILURE);
 #endif
 
-    } else if (keymatch(arg, "copy", 1)) {
+    } else if (keymatch(arg, "copy", 2)) {
       /* Select which extra markers to copy. */
       if (++argn >= argc)	/* advance to next argument */
 	usage();
@@ -173,6 +175,20 @@
       } else
 	usage();
 
+    } else if (keymatch(arg, "crop", 2)) {
+      /* Perform lossless cropping. */
+#if TRANSFORMS_SUPPORTED
+      if (++argn >= argc)	/* advance to next argument */
+	usage();
+      if (! jtransform_parse_crop_spec(&transformoption, argv[argn])) {
+	fprintf(stderr, "%s: bogus -crop argument '%s'\n",
+		progname, argv[argn]);
+	exit(EXIT_FAILURE);
+      }
+#else
+      select_transform(JXFORM_NONE);	/* force an error */
+#endif
+
     } else if (keymatch(arg, "debug", 1) || keymatch(arg, "verbose", 1)) {
       /* Enable debug printouts. */
       /* On first -d, print version identification */
@@ -342,8 +358,10 @@
   jvirt_barray_ptr * src_coef_arrays;
   jvirt_barray_ptr * dst_coef_arrays;
   int file_index;
-  FILE * input_file;
-  FILE * output_file;
+  /* We assume all-in-memory processing and can therefore use only a
+   * single file pointer for sequential input and output operation. 
+   */
+  FILE * fp;
 
   /* On Mac, fetch a command line. */
 #ifdef USE_CCOMMAND
@@ -406,24 +424,13 @@
 
   /* Open the input file. */
   if (file_index < argc) {
-    if ((input_file = fopen(argv[file_index], READ_BINARY)) == NULL) {
+    if ((fp = fopen(argv[file_index], READ_BINARY)) == NULL) {
       fprintf(stderr, "%s: can't open %s\n", progname, argv[file_index]);
       exit(EXIT_FAILURE);
     }
   } else {
     /* default input file is stdin */
-    input_file = read_stdin();
-  }
-
-  /* Open the output file. */
-  if (outfilename != NULL) {
-    if ((output_file = fopen(outfilename, WRITE_BINARY)) == NULL) {
-      fprintf(stderr, "%s: can't open %s\n", progname, outfilename);
-      exit(EXIT_FAILURE);
-    }
-  } else {
-    /* default output file is stdout */
-    output_file = write_stdout();
+    fp = read_stdin();
   }
 
 #ifdef PROGRESS_REPORT
@@ -431,7 +438,7 @@
 #endif
 
   /* Specify data source for decompression */
-  jpeg_stdio_src(&srcinfo, input_file);
+  jpeg_stdio_src(&srcinfo, fp);
 
   /* Enable saving of extra markers that we want to copy */
   jcopy_markers_setup(&srcinfo, copyoption);
@@ -463,11 +470,32 @@
   dst_coef_arrays = src_coef_arrays;
 #endif
 
+  /* Close input file, if we opened it.
+   * Note: we assume that jpeg_read_coefficients consumed all input
+   * until JPEG_REACHED_EOI, and that jpeg_finish_decompress will
+   * only consume more while (! cinfo->inputctl->eoi_reached).
+   * We cannot call jpeg_finish_decompress here since we still need the
+   * virtual arrays allocated from the source object for processing.
+   */
+  if (fp != stdin)
+    fclose(fp);
+
+  /* Open the output file. */
+  if (outfilename != NULL) {
+    if ((fp = fopen(outfilename, WRITE_BINARY)) == NULL) {
+      fprintf(stderr, "%s: can't open %s\n", progname, outfilename);
+      exit(EXIT_FAILURE);
+    }
+  } else {
+    /* default output file is stdout */
+    fp = write_stdout();
+  }
+
   /* Adjust default compression parameters by re-parsing the options */
   file_index = parse_switches(&dstinfo, argc, argv, 0, TRUE);
 
   /* Specify data destination for compression */
-  jpeg_stdio_dest(&dstinfo, output_file);
+  jpeg_stdio_dest(&dstinfo, fp);
 
   /* Start compressor (note no image data is actually written here) */
   jpeg_write_coefficients(&dstinfo, dst_coef_arrays);
@@ -488,11 +516,9 @@
   (void) jpeg_finish_decompress(&srcinfo);
   jpeg_destroy_decompress(&srcinfo);
 
-  /* Close files, if we opened them */
-  if (input_file != stdin)
-    fclose(input_file);
-  if (output_file != stdout)
-    fclose(output_file);
+  /* Close output file, if we opened it */
+  if (fp != stdout)
+    fclose(fp);
 
 #ifdef PROGRESS_REPORT
   end_progress_monitor((j_common_ptr) &dstinfo);
--- jpeg-6b/rdjpgcom.c~libjpeg6bb-5
+++ jpeg-6b/rdjpgcom.c
@@ -14,6 +14,7 @@
 #define JPEG_CJPEG_DJPEG	/* to get the command-line config symbols */
 #include "jinclude.h"		/* get auto-config symbols, <stdio.h> */
 
+#include <locale.h>             /*ballombe@debian.org: use locale for isprint*/
 #include <ctype.h>		/* to declare isupper(), tolower() */
 #ifdef USE_SETMODE
 #include <fcntl.h>		/* to declare setmode()'s parameter macros */
@@ -223,7 +224,10 @@
   unsigned int length;
   int ch;
   int lastch = 0;
-
+/* ballombe@debian.org Thu, 15 Nov 2001 20:04:47 +0100*/
+/* Set locale properly for isprint*/
+  setlocale(LC_CTYPE,"");
+    
   /* Get the marker parameter length count */
   length = read_2_bytes();
   /* Length includes itself, so must be at least 2 */
@@ -254,6 +258,8 @@
     length--;
   }
   printf("\n");
+/*ballombe@debian.org: revert to C locale*/
+  setlocale(LC_CTYPE,"C");
 }
 
 
--- jpeg-6b/transupp.c~libjpeg6bb-5
+++ jpeg-6b/transupp.c
@@ -1,7 +1,7 @@
 /*
  * transupp.c
  *
- * Copyright (C) 1997, Thomas G. Lane.
+ * Copyright (C) 1997-2001, Thomas G. Lane.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -20,6 +20,7 @@
 #include "jinclude.h"
 #include "jpeglib.h"
 #include "transupp.h"		/* My own external interface */
+#include <ctype.h>		/* to declare isdigit() */
 
 
 #if TRANSFORMS_SUPPORTED
@@ -28,7 +29,8 @@
  * Lossless image transformation routines.  These routines work on DCT
  * coefficient arrays and thus do not require any lossy decompression
  * or recompression of the image.
- * Thanks to Guido Vollbeding for the initial design and code of this feature.
+ * Thanks to Guido Vollbeding for the initial design and code of this feature,
+ * and to Ben Jackson for introducing the cropping feature.
  *
  * Horizontal flipping is done in-place, using a single top-to-bottom
  * pass through the virtual source array.  It will thus be much the
@@ -42,6 +44,13 @@
  * arrays for most of the transforms.  That could result in much thrashing
  * if the image is larger than main memory.
  *
+ * If cropping or trimming is involved, the destination arrays may be smaller
+ * than the source arrays.  Note it is not possible to do horizontal flip
+ * in-place when a nonzero Y crop offset is specified, since we'd have to move
+ * data from one block row to another but the virtual array manager doesn't
+ * guarantee we can touch more than one row at a time.  So in that case,
+ * we have to use a separate destination array.
+ *
  * Some notes about the operating environment of the individual transform
  * routines:
  * 1. Both the source and destination virtual arrays are allocated from the
@@ -54,20 +63,65 @@
  *    and we may as well take that as the effective iMCU size.
  * 4. When "trim" is in effect, the destination's dimensions will be the
  *    trimmed values but the source's will be untrimmed.
- * 5. All the routines assume that the source and destination buffers are
+ * 5. When "crop" is in effect, the destination's dimensions will be the
+ *    cropped values but the source's will be uncropped.  Each transform
+ *    routine is responsible for picking up source data starting at the
+ *    correct X and Y offset for the crop region.  (The X and Y offsets
+ *    passed to the transform routines are measured in iMCU blocks of the
+ *    destination.)
+ * 6. All the routines assume that the source and destination buffers are
  *    padded out to a full iMCU boundary.  This is true, although for the
  *    source buffer it is an undocumented property of jdcoefct.c.
- * Notes 2,3,4 boil down to this: generally we should use the destination's
- * dimensions and ignore the source's.
  */
 
 
 LOCAL(void)
-do_flip_h (j_decompress_ptr srcinfo, j_compress_ptr dstinfo,
-	   jvirt_barray_ptr *src_coef_arrays)
-/* Horizontal flip; done in-place, so no separate dest array is required */
+do_crop (j_decompress_ptr srcinfo, j_compress_ptr dstinfo,
+	 JDIMENSION x_crop_offset, JDIMENSION y_crop_offset,
+	 jvirt_barray_ptr *src_coef_arrays,
+	 jvirt_barray_ptr *dst_coef_arrays)
+/* Crop.  This is only used when no rotate/flip is requested with the crop. */
 {
-  JDIMENSION MCU_cols, comp_width, blk_x, blk_y;
+  JDIMENSION dst_blk_y, x_crop_blocks, y_crop_blocks;
+  int ci, offset_y;
+  JBLOCKARRAY src_buffer, dst_buffer;
+  jpeg_component_info *compptr;
+
+  /* We simply have to copy the right amount of data (the destination's
+   * image size) starting at the given X and Y offsets in the source.
+   */
+  for (ci = 0; ci < dstinfo->num_components; ci++) {
+    compptr = dstinfo->comp_info + ci;
+    x_crop_blocks = x_crop_offset * compptr->h_samp_factor;
+    y_crop_blocks = y_crop_offset * compptr->v_samp_factor;
+    for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks;
+	 dst_blk_y += compptr->v_samp_factor) {
+      dst_buffer = (*srcinfo->mem->access_virt_barray)
+	((j_common_ptr) srcinfo, dst_coef_arrays[ci], dst_blk_y,
+	 (JDIMENSION) compptr->v_samp_factor, TRUE);
+      src_buffer = (*srcinfo->mem->access_virt_barray)
+	((j_common_ptr) srcinfo, src_coef_arrays[ci],
+	 dst_blk_y + y_crop_blocks,
+	 (JDIMENSION) compptr->v_samp_factor, FALSE);
+      for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) {
+	jcopy_block_row(src_buffer[offset_y] + x_crop_blocks,
+			dst_buffer[offset_y],
+			compptr->width_in_blocks);
+      }
+    }
+  }
+}
+
+
+LOCAL(void)
+do_flip_h_no_crop (j_decompress_ptr srcinfo, j_compress_ptr dstinfo,
+		   JDIMENSION x_crop_offset,
+		   jvirt_barray_ptr *src_coef_arrays)
+/* Horizontal flip; done in-place, so no separate dest array is required.
+ * NB: this only works when y_crop_offset is zero.
+ */
+{
+  JDIMENSION MCU_cols, comp_width, blk_x, blk_y, x_crop_blocks;
   int ci, k, offset_y;
   JBLOCKARRAY buffer;
   JCOEFPTR ptr1, ptr2;
@@ -79,17 +133,19 @@
    * mirroring by changing the signs of odd-numbered columns.
    * Partial iMCUs at the right edge are left untouched.
    */
-  MCU_cols = dstinfo->image_width / (dstinfo->max_h_samp_factor * DCTSIZE);
+  MCU_cols = srcinfo->image_width / (dstinfo->max_h_samp_factor * DCTSIZE);
 
   for (ci = 0; ci < dstinfo->num_components; ci++) {
     compptr = dstinfo->comp_info + ci;
     comp_width = MCU_cols * compptr->h_samp_factor;
+    x_crop_blocks = x_crop_offset * compptr->h_samp_factor;
     for (blk_y = 0; blk_y < compptr->height_in_blocks;
 	 blk_y += compptr->v_samp_factor) {
       buffer = (*srcinfo->mem->access_virt_barray)
 	((j_common_ptr) srcinfo, src_coef_arrays[ci], blk_y,
 	 (JDIMENSION) compptr->v_samp_factor, TRUE);
       for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) {
+	/* Do the mirroring */
 	for (blk_x = 0; blk_x * 2 < comp_width; blk_x++) {
 	  ptr1 = buffer[offset_y][blk_x];
 	  ptr2 = buffer[offset_y][comp_width - blk_x - 1];
@@ -105,6 +161,79 @@
 	    *ptr2++ = -temp1;
 	  }
 	}
+	if (x_crop_blocks > 0) {
+	  /* Now left-justify the portion of the data to be kept.
+	   * We can't use a single jcopy_block_row() call because that routine
+	   * depends on memcpy(), whose behavior is unspecified for overlapping
+	   * source and destination areas.  Sigh.
+	   */
+	  for (blk_x = 0; blk_x < compptr->width_in_blocks; blk_x++) {
+	    jcopy_block_row(buffer[offset_y] + blk_x + x_crop_blocks,
+			    buffer[offset_y] + blk_x,
+			    (JDIMENSION) 1);
+	  }
+	}
+      }
+    }
+  }
+}
+
+
+LOCAL(void)
+do_flip_h (j_decompress_ptr srcinfo, j_compress_ptr dstinfo,
+	   JDIMENSION x_crop_offset, JDIMENSION y_crop_offset,
+	   jvirt_barray_ptr *src_coef_arrays,
+	   jvirt_barray_ptr *dst_coef_arrays)
+/* Horizontal flip in general cropping case */
+{
+  JDIMENSION MCU_cols, comp_width, dst_blk_x, dst_blk_y;
+  JDIMENSION x_crop_blocks, y_crop_blocks;
+  int ci, k, offset_y;
+  JBLOCKARRAY src_buffer, dst_buffer;
+  JBLOCKROW src_row_ptr, dst_row_ptr;
+  JCOEFPTR src_ptr, dst_ptr;
+  jpeg_component_info *compptr;
+
+  /* Here we must output into a separate array because we can't touch
+   * different rows of a single virtual array simultaneously.  Otherwise,
+   * this is essentially the same as the routine above.
+   */
+  MCU_cols = srcinfo->image_width / (dstinfo->max_h_samp_factor * DCTSIZE);
+
+  for (ci = 0; ci < dstinfo->num_components; ci++) {
+    compptr = dstinfo->comp_info + ci;
+    comp_width = MCU_cols * compptr->h_samp_factor;
+    x_crop_blocks = x_crop_offset * compptr->h_samp_factor;
+    y_crop_blocks = y_crop_offset * compptr->v_samp_factor;
+    for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks;
+	 dst_blk_y += compptr->v_samp_factor) {
+      dst_buffer = (*srcinfo->mem->access_virt_barray)
+	((j_common_ptr) srcinfo, dst_coef_arrays[ci], dst_blk_y,
+	 (JDIMENSION) compptr->v_samp_factor, TRUE);
+      src_buffer = (*srcinfo->mem->access_virt_barray)
+	((j_common_ptr) srcinfo, src_coef_arrays[ci],
+	 dst_blk_y + y_crop_blocks,
+	 (JDIMENSION) compptr->v_samp_factor, FALSE);
+      for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) {
+	dst_row_ptr = dst_buffer[offset_y];
+	src_row_ptr = src_buffer[offset_y];
+	for (dst_blk_x = 0; dst_blk_x < compptr->width_in_blocks; dst_blk_x++) {
+	  if (x_crop_blocks + dst_blk_x < comp_width) {
+	    /* Do the mirrorable blocks */
+	    dst_ptr = dst_row_ptr[dst_blk_x];
+	    src_ptr = src_row_ptr[comp_width - x_crop_blocks - dst_blk_x - 1];
+	    /* this unrolled loop doesn't need to know which row it's on... */
+	    for (k = 0; k < DCTSIZE2; k += 2) {
+	      *dst_ptr++ = *src_ptr++;	 /* copy even column */
+	      *dst_ptr++ = - *src_ptr++; /* copy odd column with sign change */
+	    }
+	  } else {
+	    /* Copy last partial block(s) verbatim */
+	    jcopy_block_row(src_row_ptr + dst_blk_x + x_crop_blocks,
+			    dst_row_ptr + dst_blk_x,
+			    (JDIMENSION) 1);
+	  }
+	}
       }
     }
   }
@@ -113,11 +242,13 @@
 
 LOCAL(void)
 do_flip_v (j_decompress_ptr srcinfo, j_compress_ptr dstinfo,
+	   JDIMENSION x_crop_offset, JDIMENSION y_crop_offset,
 	   jvirt_barray_ptr *src_coef_arrays,
 	   jvirt_barray_ptr *dst_coef_arrays)
 /* Vertical flip */
 {
   JDIMENSION MCU_rows, comp_height, dst_blk_x, dst_blk_y;
+  JDIMENSION x_crop_blocks, y_crop_blocks;
   int ci, i, j, offset_y;
   JBLOCKARRAY src_buffer, dst_buffer;
   JBLOCKROW src_row_ptr, dst_row_ptr;
@@ -131,33 +262,38 @@
    * of odd-numbered rows.
    * Partial iMCUs at the bottom edge are copied verbatim.
    */
-  MCU_rows = dstinfo->image_height / (dstinfo->max_v_samp_factor * DCTSIZE);
+  MCU_rows = srcinfo->image_height / (dstinfo->max_v_samp_factor * DCTSIZE);
 
   for (ci = 0; ci < dstinfo->num_components; ci++) {
     compptr = dstinfo->comp_info + ci;
     comp_height = MCU_rows * compptr->v_samp_factor;
+    x_crop_blocks = x_crop_offset * compptr->h_samp_factor;
+    y_crop_blocks = y_crop_offset * compptr->v_samp_factor;
     for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks;
 	 dst_blk_y += compptr->v_samp_factor) {
       dst_buffer = (*srcinfo->mem->access_virt_barray)
 	((j_common_ptr) srcinfo, dst_coef_arrays[ci], dst_blk_y,
 	 (JDIMENSION) compptr->v_samp_factor, TRUE);
-      if (dst_blk_y < comp_height) {
+      if (y_crop_blocks + dst_blk_y < comp_height) {
 	/* Row is within the mirrorable area. */
 	src_buffer = (*srcinfo->mem->access_virt_barray)
 	  ((j_common_ptr) srcinfo, src_coef_arrays[ci],
-	   comp_height - dst_blk_y - (JDIMENSION) compptr->v_samp_factor,
+	   comp_height - y_crop_blocks - dst_blk_y -
+	   (JDIMENSION) compptr->v_samp_factor,
 	   (JDIMENSION) compptr->v_samp_factor, FALSE);
       } else {
 	/* Bottom-edge blocks will be copied verbatim. */
 	src_buffer = (*srcinfo->mem->access_virt_barray)
-	  ((j_common_ptr) srcinfo, src_coef_arrays[ci], dst_blk_y,
+	  ((j_common_ptr) srcinfo, src_coef_arrays[ci],
+	   dst_blk_y + y_crop_blocks,
 	   (JDIMENSION) compptr->v_samp_factor, FALSE);
       }
       for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) {
-	if (dst_blk_y < comp_height) {
+	if (y_crop_blocks + dst_blk_y < comp_height) {
 	  /* Row is within the mirrorable area. */
 	  dst_row_ptr = dst_buffer[offset_y];
 	  src_row_ptr = src_buffer[compptr->v_samp_factor - offset_y - 1];
+	  src_row_ptr += x_crop_blocks;
 	  for (dst_blk_x = 0; dst_blk_x < compptr->width_in_blocks;
 	       dst_blk_x++) {
 	    dst_ptr = dst_row_ptr[dst_blk_x];
@@ -173,7 +309,8 @@
 	  }
 	} else {
 	  /* Just copy row verbatim. */
-	  jcopy_block_row(src_buffer[offset_y], dst_buffer[offset_y],
+	  jcopy_block_row(src_buffer[offset_y] + x_crop_blocks,
+			  dst_buffer[offset_y],
 			  compptr->width_in_blocks);
 	}
       }
@@ -184,11 +321,12 @@
 
 LOCAL(void)
 do_transpose (j_decompress_ptr srcinfo, j_compress_ptr dstinfo,
+	      JDIMENSION x_crop_offset, JDIMENSION y_crop_offset,
 	      jvirt_barray_ptr *src_coef_arrays,
 	      jvirt_barray_ptr *dst_coef_arrays)
 /* Transpose source into destination */
 {
-  JDIMENSION dst_blk_x, dst_blk_y;
+  JDIMENSION dst_blk_x, dst_blk_y, x_crop_blocks, y_crop_blocks;
   int ci, i, j, offset_x, offset_y;
   JBLOCKARRAY src_buffer, dst_buffer;
   JCOEFPTR src_ptr, dst_ptr;
@@ -201,6 +339,8 @@
    */
   for (ci = 0; ci < dstinfo->num_components; ci++) {
     compptr = dstinfo->comp_info + ci;
+    x_crop_blocks = x_crop_offset * compptr->h_samp_factor;
+    y_crop_blocks = y_crop_offset * compptr->v_samp_factor;
     for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks;
 	 dst_blk_y += compptr->v_samp_factor) {
       dst_buffer = (*srcinfo->mem->access_virt_barray)
@@ -210,11 +350,12 @@
 	for (dst_blk_x = 0; dst_blk_x < compptr->width_in_blocks;
 	     dst_blk_x += compptr->h_samp_factor) {
 	  src_buffer = (*srcinfo->mem->access_virt_barray)
-	    ((j_common_ptr) srcinfo, src_coef_arrays[ci], dst_blk_x,
+	    ((j_common_ptr) srcinfo, src_coef_arrays[ci],
+	     dst_blk_x + x_crop_blocks,
 	     (JDIMENSION) compptr->h_samp_factor, FALSE);
 	  for (offset_x = 0; offset_x < compptr->h_samp_factor; offset_x++) {
-	    src_ptr = src_buffer[offset_x][dst_blk_y + offset_y];
 	    dst_ptr = dst_buffer[offset_y][dst_blk_x + offset_x];
+	    src_ptr = src_buffer[offset_x][dst_blk_y + offset_y + y_crop_blocks];
 	    for (i = 0; i < DCTSIZE; i++)
 	      for (j = 0; j < DCTSIZE; j++)
 		dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j];
@@ -228,6 +369,7 @@
 
 LOCAL(void)
 do_rot_90 (j_decompress_ptr srcinfo, j_compress_ptr dstinfo,
+	   JDIMENSION x_crop_offset, JDIMENSION y_crop_offset,
 	   jvirt_barray_ptr *src_coef_arrays,
 	   jvirt_barray_ptr *dst_coef_arrays)
 /* 90 degree rotation is equivalent to
@@ -237,6 +379,7 @@
  */
 {
   JDIMENSION MCU_cols, comp_width, dst_blk_x, dst_blk_y;
+  JDIMENSION x_crop_blocks, y_crop_blocks;
   int ci, i, j, offset_x, offset_y;
   JBLOCKARRAY src_buffer, dst_buffer;
   JCOEFPTR src_ptr, dst_ptr;
@@ -246,11 +389,13 @@
    * at the (output) right edge properly.  They just get transposed and
    * not mirrored.
    */
-  MCU_cols = dstinfo->image_width / (dstinfo->max_h_samp_factor * DCTSIZE);
+  MCU_cols = srcinfo->image_height / (dstinfo->max_h_samp_factor * DCTSIZE);
 
   for (ci = 0; ci < dstinfo->num_components; ci++) {
     compptr = dstinfo->comp_info + ci;
     comp_width = MCU_cols * compptr->h_samp_factor;
+    x_crop_blocks = x_crop_offset * compptr->h_samp_factor;
+    y_crop_blocks = y_crop_offset * compptr->v_samp_factor;
     for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks;
 	 dst_blk_y += compptr->v_samp_factor) {
       dst_buffer = (*srcinfo->mem->access_virt_barray)
@@ -259,15 +404,26 @@
       for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) {
 	for (dst_blk_x = 0; dst_blk_x < compptr->width_in_blocks;
 	     dst_blk_x += compptr->h_samp_factor) {
-	  src_buffer = (*srcinfo->mem->access_virt_barray)
-	    ((j_common_ptr) srcinfo, src_coef_arrays[ci], dst_blk_x,
-	     (JDIMENSION) compptr->h_samp_factor, FALSE);
+	  if (x_crop_blocks + dst_blk_x < comp_width) {
+	    /* Block is within the mirrorable area. */
+	    src_buffer = (*srcinfo->mem->access_virt_barray)
+	      ((j_common_ptr) srcinfo, src_coef_arrays[ci],
+	       comp_width - x_crop_blocks - dst_blk_x -
+	       (JDIMENSION) compptr->h_samp_factor,
+	       (JDIMENSION) compptr->h_samp_factor, FALSE);
+	  } else {
+	    /* Edge blocks are transposed but not mirrored. */
+	    src_buffer = (*srcinfo->mem->access_virt_barray)
+	      ((j_common_ptr) srcinfo, src_coef_arrays[ci],
+	       dst_blk_x + x_crop_blocks,
+	       (JDIMENSION) compptr->h_samp_factor, FALSE);
+	  }
 	  for (offset_x = 0; offset_x < compptr->h_samp_factor; offset_x++) {
-	    src_ptr = src_buffer[offset_x][dst_blk_y + offset_y];
-	    if (dst_blk_x < comp_width) {
+	    dst_ptr = dst_buffer[offset_y][dst_blk_x + offset_x];
+	    if (x_crop_blocks + dst_blk_x < comp_width) {
 	      /* Block is within the mirrorable area. */
-	      dst_ptr = dst_buffer[offset_y]
-		[comp_width - dst_blk_x - offset_x - 1];
+	      src_ptr = src_buffer[compptr->h_samp_factor - offset_x - 1]
+		[dst_blk_y + offset_y + y_crop_blocks];
 	      for (i = 0; i < DCTSIZE; i++) {
 		for (j = 0; j < DCTSIZE; j++)
 		  dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j];
@@ -277,7 +433,8 @@
 	      }
 	    } else {
 	      /* Edge blocks are transposed but not mirrored. */
-	      dst_ptr = dst_buffer[offset_y][dst_blk_x + offset_x];
+	      src_ptr = src_buffer[offset_x]
+		[dst_blk_y + offset_y + y_crop_blocks];
 	      for (i = 0; i < DCTSIZE; i++)
 		for (j = 0; j < DCTSIZE; j++)
 		  dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j];
@@ -292,6 +449,7 @@
 
 LOCAL(void)
 do_rot_270 (j_decompress_ptr srcinfo, j_compress_ptr dstinfo,
+	    JDIMENSION x_crop_offset, JDIMENSION y_crop_offset,
 	    jvirt_barray_ptr *src_coef_arrays,
 	    jvirt_barray_ptr *dst_coef_arrays)
 /* 270 degree rotation is equivalent to
@@ -301,6 +459,7 @@
  */
 {
   JDIMENSION MCU_rows, comp_height, dst_blk_x, dst_blk_y;
+  JDIMENSION x_crop_blocks, y_crop_blocks;
   int ci, i, j, offset_x, offset_y;
   JBLOCKARRAY src_buffer, dst_buffer;
   JCOEFPTR src_ptr, dst_ptr;
@@ -310,11 +469,13 @@
    * at the (output) bottom edge properly.  They just get transposed and
    * not mirrored.
    */
-  MCU_rows = dstinfo->image_height / (dstinfo->max_v_samp_factor * DCTSIZE);
+  MCU_rows = srcinfo->image_width / (dstinfo->max_v_samp_factor * DCTSIZE);
 
   for (ci = 0; ci < dstinfo->num_components; ci++) {
     compptr = dstinfo->comp_info + ci;
     comp_height = MCU_rows * compptr->v_samp_factor;
+    x_crop_blocks = x_crop_offset * compptr->h_samp_factor;
+    y_crop_blocks = y_crop_offset * compptr->v_samp_factor;
     for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks;
 	 dst_blk_y += compptr->v_samp_factor) {
       dst_buffer = (*srcinfo->mem->access_virt_barray)
@@ -324,14 +485,15 @@
 	for (dst_blk_x = 0; dst_blk_x < compptr->width_in_blocks;
 	     dst_blk_x += compptr->h_samp_factor) {
 	  src_buffer = (*srcinfo->mem->access_virt_barray)
-	    ((j_common_ptr) srcinfo, src_coef_arrays[ci], dst_blk_x,
+	    ((j_common_ptr) srcinfo, src_coef_arrays[ci],
+	     dst_blk_x + x_crop_blocks,
 	     (JDIMENSION) compptr->h_samp_factor, FALSE);
 	  for (offset_x = 0; offset_x < compptr->h_samp_factor; offset_x++) {
 	    dst_ptr = dst_buffer[offset_y][dst_blk_x + offset_x];
-	    if (dst_blk_y < comp_height) {
+	    if (y_crop_blocks + dst_blk_y < comp_height) {
 	      /* Block is within the mirrorable area. */
 	      src_ptr = src_buffer[offset_x]
-		[comp_height - dst_blk_y - offset_y - 1];
+		[comp_height - y_crop_blocks - dst_blk_y - offset_y - 1];
 	      for (i = 0; i < DCTSIZE; i++) {
 		for (j = 0; j < DCTSIZE; j++) {
 		  dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j];
@@ -341,7 +503,8 @@
 	      }
 	    } else {
 	      /* Edge blocks are transposed but not mirrored. */
-	      src_ptr = src_buffer[offset_x][dst_blk_y + offset_y];
+	      src_ptr = src_buffer[offset_x]
+		[dst_blk_y + offset_y + y_crop_blocks];
 	      for (i = 0; i < DCTSIZE; i++)
 		for (j = 0; j < DCTSIZE; j++)
 		  dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j];
@@ -356,6 +519,7 @@
 
 LOCAL(void)
 do_rot_180 (j_decompress_ptr srcinfo, j_compress_ptr dstinfo,
+	    JDIMENSION x_crop_offset, JDIMENSION y_crop_offset,
 	    jvirt_barray_ptr *src_coef_arrays,
 	    jvirt_barray_ptr *dst_coef_arrays)
 /* 180 degree rotation is equivalent to
@@ -365,89 +529,93 @@
  */
 {
   JDIMENSION MCU_cols, MCU_rows, comp_width, comp_height, dst_blk_x, dst_blk_y;
+  JDIMENSION x_crop_blocks, y_crop_blocks;
   int ci, i, j, offset_y;
   JBLOCKARRAY src_buffer, dst_buffer;
   JBLOCKROW src_row_ptr, dst_row_ptr;
   JCOEFPTR src_ptr, dst_ptr;
   jpeg_component_info *compptr;
 
-  MCU_cols = dstinfo->image_width / (dstinfo->max_h_samp_factor * DCTSIZE);
-  MCU_rows = dstinfo->image_height / (dstinfo->max_v_samp_factor * DCTSIZE);
+  MCU_cols = srcinfo->image_width / (dstinfo->max_h_samp_factor * DCTSIZE);
+  MCU_rows = srcinfo->image_height / (dstinfo->max_v_samp_factor * DCTSIZE);
 
   for (ci = 0; ci < dstinfo->num_components; ci++) {
     compptr = dstinfo->comp_info + ci;
     comp_width = MCU_cols * compptr->h_samp_factor;
     comp_height = MCU_rows * compptr->v_samp_factor;
+    x_crop_blocks = x_crop_offset * compptr->h_samp_factor;
+    y_crop_blocks = y_crop_offset * compptr->v_samp_factor;
     for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks;
 	 dst_blk_y += compptr->v_samp_factor) {
       dst_buffer = (*srcinfo->mem->access_virt_barray)
 	((j_common_ptr) srcinfo, dst_coef_arrays[ci], dst_blk_y,
 	 (JDIMENSION) compptr->v_samp_factor, TRUE);
-      if (dst_blk_y < comp_height) {
+      if (y_crop_blocks + dst_blk_y < comp_height) {
 	/* Row is within the vertically mirrorable area. */
 	src_buffer = (*srcinfo->mem->access_virt_barray)
 	  ((j_common_ptr) srcinfo, src_coef_arrays[ci],
-	   comp_height - dst_blk_y - (JDIMENSION) compptr->v_samp_factor,
+	   comp_height - y_crop_blocks - dst_blk_y -
+	   (JDIMENSION) compptr->v_samp_factor,
 	   (JDIMENSION) compptr->v_samp_factor, FALSE);
       } else {
 	/* Bottom-edge rows are only mirrored horizontally. */
 	src_buffer = (*srcinfo->mem->access_virt_barray)
-	  ((j_common_ptr) srcinfo, src_coef_arrays[ci], dst_blk_y,
+	  ((j_common_ptr) srcinfo, src_coef_arrays[ci],
+	   dst_blk_y + y_crop_blocks,
 	   (JDIMENSION) compptr->v_samp_factor, FALSE);
       }
       for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) {
-	if (dst_blk_y < comp_height) {
+	dst_row_ptr = dst_buffer[offset_y];
+	if (y_crop_blocks + dst_blk_y < comp_height) {
 	  /* Row is within the mirrorable area. */
-	  dst_row_ptr = dst_buffer[offset_y];
 	  src_row_ptr = src_buffer[compptr->v_samp_factor - offset_y - 1];
-	  /* Process the blocks that can be mirrored both ways. */
-	  for (dst_blk_x = 0; dst_blk_x < comp_width; dst_blk_x++) {
+	  for (dst_blk_x = 0; dst_blk_x < compptr->width_in_blocks; dst_blk_x++) {
 	    dst_ptr = dst_row_ptr[dst_blk_x];
-	    src_ptr = src_row_ptr[comp_width - dst_blk_x - 1];
-	    for (i = 0; i < DCTSIZE; i += 2) {
-	      /* For even row, negate every odd column. */
-	      for (j = 0; j < DCTSIZE; j += 2) {
-		*dst_ptr++ = *src_ptr++;
-		*dst_ptr++ = - *src_ptr++;
+	    if (x_crop_blocks + dst_blk_x < comp_width) {
+	      /* Process the blocks that can be mirrored both ways. */
+	      src_ptr = src_row_ptr[comp_width - x_crop_blocks - dst_blk_x - 1];
+	      for (i = 0; i < DCTSIZE; i += 2) {
+		/* For even row, negate every odd column. */
+		for (j = 0; j < DCTSIZE; j += 2) {
+		  *dst_ptr++ = *src_ptr++;
+		  *dst_ptr++ = - *src_ptr++;
+		}
+		/* For odd row, negate every even column. */
+		for (j = 0; j < DCTSIZE; j += 2) {
+		  *dst_ptr++ = - *src_ptr++;
+		  *dst_ptr++ = *src_ptr++;
+		}
 	      }
-	      /* For odd row, negate every even column. */
-	      for (j = 0; j < DCTSIZE; j += 2) {
-		*dst_ptr++ = - *src_ptr++;
-		*dst_ptr++ = *src_ptr++;
+	    } else {
+	      /* Any remaining right-edge blocks are only mirrored vertically. */
+	      src_ptr = src_row_ptr[x_crop_blocks + dst_blk_x];
+	      for (i = 0; i < DCTSIZE; i += 2) {
+		for (j = 0; j < DCTSIZE; j++)
+		  *dst_ptr++ = *src_ptr++;
+		for (j = 0; j < DCTSIZE; j++)
+		  *dst_ptr++ = - *src_ptr++;
 	      }
 	    }
 	  }
-	  /* Any remaining right-edge blocks are only mirrored vertically. */
-	  for (; dst_blk_x < compptr->width_in_blocks; dst_blk_x++) {
-	    dst_ptr = dst_row_ptr[dst_blk_x];
-	    src_ptr = src_row_ptr[dst_blk_x];
-	    for (i = 0; i < DCTSIZE; i += 2) {
-	      for (j = 0; j < DCTSIZE; j++)
-		*dst_ptr++ = *src_ptr++;
-	      for (j = 0; j < DCTSIZE; j++)
-		*dst_ptr++ = - *src_ptr++;
-	    }
-	  }
 	} else {
 	  /* Remaining rows are just mirrored horizontally. */
-	  dst_row_ptr = dst_buffer[offset_y];
 	  src_row_ptr = src_buffer[offset_y];
-	  /* Process the blocks that can be mirrored. */
-	  for (dst_blk_x = 0; dst_blk_x < comp_width; dst_blk_x++) {
-	    dst_ptr = dst_row_ptr[dst_blk_x];
-	    src_ptr = src_row_ptr[comp_width - dst_blk_x - 1];
-	    for (i = 0; i < DCTSIZE2; i += 2) {
-	      *dst_ptr++ = *src_ptr++;
-	      *dst_ptr++ = - *src_ptr++;
+	  for (dst_blk_x = 0; dst_blk_x < compptr->width_in_blocks; dst_blk_x++) {
+	    if (x_crop_blocks + dst_blk_x < comp_width) {
+	      /* Process the blocks that can be mirrored. */
+	      dst_ptr = dst_row_ptr[dst_blk_x];
+	      src_ptr = src_row_ptr[comp_width - x_crop_blocks - dst_blk_x - 1];
+	      for (i = 0; i < DCTSIZE2; i += 2) {
+		*dst_ptr++ = *src_ptr++;
+		*dst_ptr++ = - *src_ptr++;
+	      }
+	    } else {
+	      /* Any remaining right-edge blocks are only copied. */
+	      jcopy_block_row(src_row_ptr + dst_blk_x + x_crop_blocks,
+			      dst_row_ptr + dst_blk_x,
+			      (JDIMENSION) 1);
 	    }
 	  }
-	  /* Any remaining right-edge blocks are only copied. */
-	  for (; dst_blk_x < compptr->width_in_blocks; dst_blk_x++) {
-	    dst_ptr = dst_row_ptr[dst_blk_x];
-	    src_ptr = src_row_ptr[dst_blk_x];
-	    for (i = 0; i < DCTSIZE2; i++)
-	      *dst_ptr++ = *src_ptr++;
-	  }
 	}
       }
     }
@@ -457,6 +625,7 @@
 
 LOCAL(void)
 do_transverse (j_decompress_ptr srcinfo, j_compress_ptr dstinfo,
+	       JDIMENSION x_crop_offset, JDIMENSION y_crop_offset,
 	       jvirt_barray_ptr *src_coef_arrays,
 	       jvirt_barray_ptr *dst_coef_arrays)
 /* Transverse transpose is equivalent to
@@ -470,18 +639,21 @@
  */
 {
   JDIMENSION MCU_cols, MCU_rows, comp_width, comp_height, dst_blk_x, dst_blk_y;
+  JDIMENSION x_crop_blocks, y_crop_blocks;
   int ci, i, j, offset_x, offset_y;
   JBLOCKARRAY src_buffer, dst_buffer;
   JCOEFPTR src_ptr, dst_ptr;
   jpeg_component_info *compptr;
 
-  MCU_cols = dstinfo->image_width / (dstinfo->max_h_samp_factor * DCTSIZE);
-  MCU_rows = dstinfo->image_height / (dstinfo->max_v_samp_factor * DCTSIZE);
+  MCU_cols = srcinfo->image_height / (dstinfo->max_h_samp_factor * DCTSIZE);
+  MCU_rows = srcinfo->image_width / (dstinfo->max_v_samp_factor * DCTSIZE);
 
   for (ci = 0; ci < dstinfo->num_components; ci++) {
     compptr = dstinfo->comp_info + ci;
     comp_width = MCU_cols * compptr->h_samp_factor;
     comp_height = MCU_rows * compptr->v_samp_factor;
+    x_crop_blocks = x_crop_offset * compptr->h_samp_factor;
+    y_crop_blocks = y_crop_offset * compptr->v_samp_factor;
     for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks;
 	 dst_blk_y += compptr->v_samp_factor) {
       dst_buffer = (*srcinfo->mem->access_virt_barray)
@@ -490,17 +662,26 @@
       for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) {
 	for (dst_blk_x = 0; dst_blk_x < compptr->width_in_blocks;
 	     dst_blk_x += compptr->h_samp_factor) {
-	  src_buffer = (*srcinfo->mem->access_virt_barray)
-	    ((j_common_ptr) srcinfo, src_coef_arrays[ci], dst_blk_x,
-	     (JDIMENSION) compptr->h_samp_factor, FALSE);
+	  if (x_crop_blocks + dst_blk_x < comp_width) {
+	    /* Block is within the mirrorable area. */
+	    src_buffer = (*srcinfo->mem->access_virt_barray)
+	      ((j_common_ptr) srcinfo, src_coef_arrays[ci],
+	       comp_width - x_crop_blocks - dst_blk_x -
+	       (JDIMENSION) compptr->h_samp_factor,
+	       (JDIMENSION) compptr->h_samp_factor, FALSE);
+	  } else {
+	    src_buffer = (*srcinfo->mem->access_virt_barray)
+	      ((j_common_ptr) srcinfo, src_coef_arrays[ci],
+	       dst_blk_x + x_crop_blocks,
+	       (JDIMENSION) compptr->h_samp_factor, FALSE);
+	  }
 	  for (offset_x = 0; offset_x < compptr->h_samp_factor; offset_x++) {
-	    if (dst_blk_y < comp_height) {
-	      src_ptr = src_buffer[offset_x]
-		[comp_height - dst_blk_y - offset_y - 1];
-	      if (dst_blk_x < comp_width) {
+	    dst_ptr = dst_buffer[offset_y][dst_blk_x + offset_x];
+	    if (y_crop_blocks + dst_blk_y < comp_height) {
+	      if (x_crop_blocks + dst_blk_x < comp_width) {
 		/* Block is within the mirrorable area. */
-		dst_ptr = dst_buffer[offset_y]
-		  [comp_width - dst_blk_x - offset_x - 1];
+		src_ptr = src_buffer[compptr->h_samp_factor - offset_x - 1]
+		  [comp_height - y_crop_blocks - dst_blk_y - offset_y - 1];
 		for (i = 0; i < DCTSIZE; i++) {
 		  for (j = 0; j < DCTSIZE; j++) {
 		    dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j];
@@ -516,7 +697,8 @@
 		}
 	      } else {
 		/* Right-edge blocks are mirrored in y only */
-		dst_ptr = dst_buffer[offset_y][dst_blk_x + offset_x];
+		src_ptr = src_buffer[offset_x]
+		  [comp_height - y_crop_blocks - dst_blk_y - offset_y - 1];
 		for (i = 0; i < DCTSIZE; i++) {
 		  for (j = 0; j < DCTSIZE; j++) {
 		    dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j];
@@ -526,11 +708,10 @@
 		}
 	      }
 	    } else {
-	      src_ptr = src_buffer[offset_x][dst_blk_y + offset_y];
-	      if (dst_blk_x < comp_width) {
+	      if (x_crop_blocks + dst_blk_x < comp_width) {
 		/* Bottom-edge blocks are mirrored in x only */
-		dst_ptr = dst_buffer[offset_y]
-		  [comp_width - dst_blk_x - offset_x - 1];
+		src_ptr = src_buffer[compptr->h_samp_factor - offset_x - 1]
+		  [dst_blk_y + offset_y + y_crop_blocks];
 		for (i = 0; i < DCTSIZE; i++) {
 		  for (j = 0; j < DCTSIZE; j++)
 		    dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j];
@@ -540,7 +721,8 @@
 		}
 	      } else {
 		/* At lower right corner, just transpose, no mirroring */
-		dst_ptr = dst_buffer[offset_y][dst_blk_x + offset_x];
+		src_ptr = src_buffer[offset_x]
+		  [dst_blk_y + offset_y + y_crop_blocks];
 		for (i = 0; i < DCTSIZE; i++)
 		  for (j = 0; j < DCTSIZE; j++)
 		    dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j];
@@ -554,8 +736,116 @@
 }
 
 
+/* Parse an unsigned integer: subroutine for jtransform_parse_crop_spec.
+ * Returns TRUE if valid integer found, FALSE if not.
+ * *strptr is advanced over the digit string, and *result is set to its value.
+ */
+
+LOCAL(boolean)
+jt_read_integer (const char ** strptr, JDIMENSION * result)
+{
+  const char * ptr = *strptr;
+  JDIMENSION val = 0;
+
+  for (; isdigit(*ptr); ptr++) {
+    val = val * 10 + (JDIMENSION) (*ptr - '0');
+  }
+  *result = val;
+  if (ptr == *strptr)
+    return FALSE;		/* oops, no digits */
+  *strptr = ptr;
+  return TRUE;
+}
+
+
+/* Parse a crop specification (written in X11 geometry style).
+ * The routine returns TRUE if the spec string is valid, FALSE if not.
+ *
+ * The crop spec string should have the format
+ *	<width>x<height>{+-}<xoffset>{+-}<yoffset>
+ * where width, height, xoffset, and yoffset are unsigned integers.
+ * Each of the elements can be omitted to indicate a default value.
+ * (A weakness of this style is that it is not possible to omit xoffset
+ * while specifying yoffset, since they look alike.)
+ *
+ * This code is loosely based on XParseGeometry from the X11 distribution.
+ */
+
+GLOBAL(boolean)
+jtransform_parse_crop_spec (jpeg_transform_info *info, const char *spec)
+{
+  info->crop = FALSE;
+  info->crop_width_set = JCROP_UNSET;
+  info->crop_height_set = JCROP_UNSET;
+  info->crop_xoffset_set = JCROP_UNSET;
+  info->crop_yoffset_set = JCROP_UNSET;
+
+  if (isdigit(*spec)) {
+    /* fetch width */
+    if (! jt_read_integer(&spec, &info->crop_width))
+      return FALSE;
+    info->crop_width_set = JCROP_POS;
+  }
+  if (*spec == 'x' || *spec == 'X') {	
+    /* fetch height */
+    spec++;
+    if (! jt_read_integer(&spec, &info->crop_height))
+      return FALSE;
+    info->crop_height_set = JCROP_POS;
+  }
+  if (*spec == '+' || *spec == '-') {
+    /* fetch xoffset */
+    info->crop_xoffset_set = (*spec == '-') ? JCROP_NEG : JCROP_POS;
+    spec++;
+    if (! jt_read_integer(&spec, &info->crop_xoffset))
+      return FALSE;
+  }
+  if (*spec == '+' || *spec == '-') {
+    /* fetch yoffset */
+    info->crop_yoffset_set = (*spec == '-') ? JCROP_NEG : JCROP_POS;
+    spec++;
+    if (! jt_read_integer(&spec, &info->crop_yoffset))
+      return FALSE;
+  }
+  /* We had better have gotten to the end of the string. */
+  if (*spec != '\0')
+    return FALSE;
+  info->crop = TRUE;
+  return TRUE;
+}
+
+
+/* Trim off any partial iMCUs on the indicated destination edge */
+
+LOCAL(void)
+trim_right_edge (jpeg_transform_info *info, JDIMENSION full_width)
+{
+  JDIMENSION MCU_cols;
+
+  MCU_cols = info->output_width / (info->max_h_samp_factor * DCTSIZE);
+  if (MCU_cols > 0 && info->x_crop_offset + MCU_cols ==
+      full_width / (info->max_h_samp_factor * DCTSIZE))
+    info->output_width = MCU_cols * (info->max_h_samp_factor * DCTSIZE);
+}
+
+LOCAL(void)
+trim_bottom_edge (jpeg_transform_info *info, JDIMENSION full_height)
+{
+  JDIMENSION MCU_rows;
+
+  MCU_rows = info->output_height / (info->max_v_samp_factor * DCTSIZE);
+  if (MCU_rows > 0 && info->y_crop_offset + MCU_rows ==
+      full_height / (info->max_v_samp_factor * DCTSIZE))
+    info->output_height = MCU_rows * (info->max_v_samp_factor * DCTSIZE);
+}
+
+
 /* Request any required workspace.
  *
+ * This routine figures out the size that the output image will be
+ * (which implies that all the transform parameters must be set before
+ * it is called).
+ *
  * We allocate the workspace virtual arrays from the source decompression
  * object, so that all the arrays (both the original data and the workspace)
  * will be taken into account while making memory management decisions.
@@ -569,9 +859,13 @@
 			      jpeg_transform_info *info)
 {
   jvirt_barray_ptr *coef_arrays = NULL;
+  boolean need_workspace, transpose_it;
   jpeg_component_info *compptr;
-  int ci;
+  JDIMENSION xoffset, yoffset, width_in_iMCUs, height_in_iMCUs;
+  JDIMENSION width_in_blocks, height_in_blocks;
+  int ci, h_samp_factor, v_samp_factor;
 
+  /* Determine number of components in output image */
   if (info->force_grayscale &&
       srcinfo->jpeg_color_space == JCS_YCbCr &&
       srcinfo->num_components == 3) {
@@ -581,55 +875,181 @@
     /* Process all the components */
     info->num_components = srcinfo->num_components;
   }
+  /* If there is only one output component, force the iMCU size to be 1;
+   * else use the source iMCU size.  (This allows us to do the right thing
+   * when reducing color to grayscale, and also provides a handy way of
+   * cleaning up "funny" grayscale images whose sampling factors are not 1x1.)
+   */
+
+  switch (info->transform) {
+  case JXFORM_TRANSPOSE:
+  case JXFORM_TRANSVERSE:
+  case JXFORM_ROT_90:
+  case JXFORM_ROT_270:
+    info->output_width = srcinfo->image_height;
+    info->output_height = srcinfo->image_width;
+    if (info->num_components == 1) {
+      info->max_h_samp_factor = 1;
+      info->max_v_samp_factor = 1;
+    } else {
+      info->max_h_samp_factor = srcinfo->max_v_samp_factor;
+      info->max_v_samp_factor = srcinfo->max_h_samp_factor;
+    }
+    break;
+  default:
+    info->output_width = srcinfo->image_width;
+    info->output_height = srcinfo->image_height;
+    if (info->num_components == 1) {
+      info->max_h_samp_factor = 1;
+      info->max_v_samp_factor = 1;
+    } else {
+      info->max_h_samp_factor = srcinfo->max_h_samp_factor;
+      info->max_v_samp_factor = srcinfo->max_v_samp_factor;
+    }
+    break;
+  }
+
+  /* If cropping has been requested, compute the crop area's position and
+   * dimensions, ensuring that its upper left corner falls at an iMCU boundary.
+   */
+  if (info->crop) {
+    /* Insert default values for unset crop parameters */
+    if (info->crop_xoffset_set == JCROP_UNSET)
+      info->crop_xoffset = 0;	/* default to +0 */
+    if (info->crop_yoffset_set == JCROP_UNSET)
+      info->crop_yoffset = 0;	/* default to +0 */
+    if (info->crop_xoffset >= info->output_width ||
+	info->crop_yoffset >= info->output_height)
+      ERREXIT(srcinfo, JERR_BAD_CROP_SPEC);
+    if (info->crop_width_set == JCROP_UNSET)
+      info->crop_width = info->output_width - info->crop_xoffset;
+    if (info->crop_height_set == JCROP_UNSET)
+      info->crop_height = info->output_height - info->crop_yoffset;
+    /* Ensure parameters are valid */
+    if (info->crop_width <= 0 || info->crop_width > info->output_width ||
+	info->crop_height <= 0 || info->crop_height > info->output_height ||
+	info->crop_xoffset > info->output_width - info->crop_width ||
+	info->crop_yoffset > info->output_height - info->crop_height)
+      ERREXIT(srcinfo, JERR_BAD_CROP_SPEC);
+    /* Convert negative crop offsets into regular offsets */
+    if (info->crop_xoffset_set == JCROP_NEG)
+      xoffset = info->output_width - info->crop_width - info->crop_xoffset;
+    else
+      xoffset = info->crop_xoffset;
+    if (info->crop_yoffset_set == JCROP_NEG)
+      yoffset = info->output_height - info->crop_height - info->crop_yoffset;
+    else
+      yoffset = info->crop_yoffset;
+    /* Now adjust so that upper left corner falls at an iMCU boundary */
+    info->output_width =
+      info->crop_width + (xoffset % (info->max_h_samp_factor * DCTSIZE));
+    info->output_height =
+      info->crop_height + (yoffset % (info->max_v_samp_factor * DCTSIZE));
+    /* Save x/y offsets measured in iMCUs */
+    info->x_crop_offset = xoffset / (info->max_h_samp_factor * DCTSIZE);
+    info->y_crop_offset = yoffset / (info->max_v_samp_factor * DCTSIZE);
+  } else {
+    info->x_crop_offset = 0;
+    info->y_crop_offset = 0;
+  }
 
+  /* Figure out whether we need workspace arrays,
+   * and if so whether they are transposed relative to the source.
+   */
+  need_workspace = FALSE;
+  transpose_it = FALSE;
   switch (info->transform) {
   case JXFORM_NONE:
+    if (info->x_crop_offset != 0 || info->y_crop_offset != 0)
+      need_workspace = TRUE;
+    /* No workspace needed if neither cropping nor transforming */
+    break;
   case JXFORM_FLIP_H:
-    /* Don't need a workspace array */
+    if (info->trim)
+      trim_right_edge(info, srcinfo->image_width);
+    if (info->y_crop_offset != 0)
+      need_workspace = TRUE;
+    /* do_flip_h_no_crop doesn't need a workspace array */
     break;
   case JXFORM_FLIP_V:
-  case JXFORM_ROT_180:
-    /* Need workspace arrays having same dimensions as source image.
-     * Note that we allocate arrays padded out to the next iMCU boundary,
-     * so that transform routines need not worry about missing edge blocks.
-     */
-    coef_arrays = (jvirt_barray_ptr *)
-      (*srcinfo->mem->alloc_small) ((j_common_ptr) srcinfo, JPOOL_IMAGE,
-	SIZEOF(jvirt_barray_ptr) * info->num_components);
-    for (ci = 0; ci < info->num_components; ci++) {
-      compptr = srcinfo->comp_info + ci;
-      coef_arrays[ci] = (*srcinfo->mem->request_virt_barray)
-	((j_common_ptr) srcinfo, JPOOL_IMAGE, FALSE,
-	 (JDIMENSION) jround_up((long) compptr->width_in_blocks,
-				(long) compptr->h_samp_factor),
-	 (JDIMENSION) jround_up((long) compptr->height_in_blocks,
-				(long) compptr->v_samp_factor),
-	 (JDIMENSION) compptr->v_samp_factor);
-    }
+    if (info->trim)
+      trim_bottom_edge(info, srcinfo->image_height);
+    /* Need workspace arrays having same dimensions as source image. */
+    need_workspace = TRUE;
     break;
   case JXFORM_TRANSPOSE:
+    /* transpose does NOT have to trim anything */
+    /* Need workspace arrays having transposed dimensions. */
+    need_workspace = TRUE;
+    transpose_it = TRUE;
+    break;
   case JXFORM_TRANSVERSE:
+    if (info->trim) {
+      trim_right_edge(info, srcinfo->image_height);
+      trim_bottom_edge(info, srcinfo->image_width);
+    }
+    /* Need workspace arrays having transposed dimensions. */
+    need_workspace = TRUE;
+    transpose_it = TRUE;
+    break;
   case JXFORM_ROT_90:
+    if (info->trim)
+      trim_right_edge(info, srcinfo->image_height);
+    /* Need workspace arrays having transposed dimensions. */
+    need_workspace = TRUE;
+    transpose_it = TRUE;
+    break;
+  case JXFORM_ROT_180:
+    if (info->trim) {
+      trim_right_edge(info, srcinfo->image_width);
+      trim_bottom_edge(info, srcinfo->image_height);
+    }
+    /* Need workspace arrays having same dimensions as source image. */
+    need_workspace = TRUE;
+    break;
   case JXFORM_ROT_270:
-    /* Need workspace arrays having transposed dimensions.
-     * Note that we allocate arrays padded out to the next iMCU boundary,
-     * so that transform routines need not worry about missing edge blocks.
-     */
+    if (info->trim)
+      trim_bottom_edge(info, srcinfo->image_width);
+    /* Need workspace arrays having transposed dimensions. */
+    need_workspace = TRUE;
+    transpose_it = TRUE;
+    break;
+  }
+
+  /* Allocate workspace if needed.
+   * Note that we allocate arrays padded out to the next iMCU boundary,
+   * so that transform routines need not worry about missing edge blocks.
+   */
+  if (need_workspace) {
     coef_arrays = (jvirt_barray_ptr *)
       (*srcinfo->mem->alloc_small) ((j_common_ptr) srcinfo, JPOOL_IMAGE,
-	SIZEOF(jvirt_barray_ptr) * info->num_components);
+		SIZEOF(jvirt_barray_ptr) * info->num_components);
+    width_in_iMCUs = (JDIMENSION)
+      jdiv_round_up((long) info->output_width,
+		    (long) (info->max_h_samp_factor * DCTSIZE));
+    height_in_iMCUs = (JDIMENSION)
+      jdiv_round_up((long) info->output_height,
+		    (long) (info->max_v_samp_factor * DCTSIZE));
     for (ci = 0; ci < info->num_components; ci++) {
       compptr = srcinfo->comp_info + ci;
+      if (info->num_components == 1) {
+	/* we're going to force samp factors to 1x1 in this case */
+	h_samp_factor = v_samp_factor = 1;
+      } else if (transpose_it) {
+	h_samp_factor = compptr->v_samp_factor;
+	v_samp_factor = compptr->h_samp_factor;
+      } else {
+	h_samp_factor = compptr->h_samp_factor;
+	v_samp_factor = compptr->v_samp_factor;
+      }
+      width_in_blocks = width_in_iMCUs * h_samp_factor;
+      height_in_blocks = height_in_iMCUs * v_samp_factor;
       coef_arrays[ci] = (*srcinfo->mem->request_virt_barray)
 	((j_common_ptr) srcinfo, JPOOL_IMAGE, FALSE,
-	 (JDIMENSION) jround_up((long) compptr->height_in_blocks,
-				(long) compptr->v_samp_factor),
-	 (JDIMENSION) jround_up((long) compptr->width_in_blocks,
-				(long) compptr->h_samp_factor),
-	 (JDIMENSION) compptr->h_samp_factor);
+	 width_in_blocks, height_in_blocks, (JDIMENSION) v_samp_factor);
     }
-    break;
   }
+
   info->workspace_coef_arrays = coef_arrays;
 }
 
@@ -642,14 +1062,8 @@
   int tblno, i, j, ci, itemp;
   jpeg_component_info *compptr;
   JQUANT_TBL *qtblptr;
-  JDIMENSION dtemp;
   UINT16 qtemp;
 
-  /* Transpose basic image dimensions */
-  dtemp = dstinfo->image_width;
-  dstinfo->image_width = dstinfo->image_height;
-  dstinfo->image_height = dtemp;
-
   /* Transpose sampling factors */
   for (ci = 0; ci < dstinfo->num_components; ci++) {
     compptr = dstinfo->comp_info + ci;
@@ -674,46 +1088,159 @@
 }
 
 
-/* Trim off any partial iMCUs on the indicated destination edge */
+/* Adjust Exif image parameters.
+ *
+ * We try to adjust the Tags ExifImageWidth and ExifImageHeight if possible.
+ */
 
 LOCAL(void)
-trim_right_edge (j_compress_ptr dstinfo)
+adjust_exif_parameters (JOCTET FAR * data, unsigned int length,
+			JDIMENSION new_width, JDIMENSION new_height)
 {
-  int ci, max_h_samp_factor;
-  JDIMENSION MCU_cols;
+  boolean is_motorola; /* Flag for byte order */
+  unsigned int number_of_tags, tagnum;
+  unsigned int firstoffset, offset;
+  JDIMENSION new_value;
 
-  /* We have to compute max_h_samp_factor ourselves,
-   * because it hasn't been set yet in the destination
-   * (and we don't want to use the source's value).
-   */
-  max_h_samp_factor = 1;
-  for (ci = 0; ci < dstinfo->num_components; ci++) {
-    int h_samp_factor = dstinfo->comp_info[ci].h_samp_factor;
-    max_h_samp_factor = MAX(max_h_samp_factor, h_samp_factor);
+  if (length < 12) return; /* Length of an IFD entry */
+
+  /* Discover byte order */
+  if (GETJOCTET(data[0]) == 0x49 && GETJOCTET(data[1]) == 0x49)
+    is_motorola = FALSE;
+  else if (GETJOCTET(data[0]) == 0x4D && GETJOCTET(data[1]) == 0x4D)
+    is_motorola = TRUE;
+  else
+    return;
+
+  /* Check Tag Mark */
+  if (is_motorola) {
+    if (GETJOCTET(data[2]) != 0) return;
+    if (GETJOCTET(data[3]) != 0x2A) return;
+  } else {
+    if (GETJOCTET(data[3]) != 0) return;
+    if (GETJOCTET(data[2]) != 0x2A) return;
   }
-  MCU_cols = dstinfo->image_width / (max_h_samp_factor * DCTSIZE);
-  if (MCU_cols > 0)		/* can't trim to 0 pixels */
-    dstinfo->image_width = MCU_cols * (max_h_samp_factor * DCTSIZE);
-}
 
-LOCAL(void)
-trim_bottom_edge (j_compress_ptr dstinfo)
-{
-  int ci, max_v_samp_factor;
-  JDIMENSION MCU_rows;
+  /* Get first IFD offset (offset to IFD0) */
+  if (is_motorola) {
+    if (GETJOCTET(data[4]) != 0) return;
+    if (GETJOCTET(data[5]) != 0) return;
+    firstoffset = GETJOCTET(data[6]);
+    firstoffset <<= 8;
+    firstoffset += GETJOCTET(data[7]);
+  } else {
+    if (GETJOCTET(data[7]) != 0) return;
+    if (GETJOCTET(data[6]) != 0) return;
+    firstoffset = GETJOCTET(data[5]);
+    firstoffset <<= 8;
+    firstoffset += GETJOCTET(data[4]);
+  }
+  if (firstoffset > length - 2) return; /* check end of data segment */
 
-  /* We have to compute max_v_samp_factor ourselves,
-   * because it hasn't been set yet in the destination
-   * (and we don't want to use the source's value).
-   */
-  max_v_samp_factor = 1;
-  for (ci = 0; ci < dstinfo->num_components; ci++) {
-    int v_samp_factor = dstinfo->comp_info[ci].v_samp_factor;
-    max_v_samp_factor = MAX(max_v_samp_factor, v_samp_factor);
+  /* Get the number of directory entries contained in this IFD */
+  if (is_motorola) {
+    number_of_tags = GETJOCTET(data[firstoffset]);
+    number_of_tags <<= 8;
+    number_of_tags += GETJOCTET(data[firstoffset+1]);
+  } else {
+    number_of_tags = GETJOCTET(data[firstoffset+1]);
+    number_of_tags <<= 8;
+    number_of_tags += GETJOCTET(data[firstoffset]);
   }
-  MCU_rows = dstinfo->image_height / (max_v_samp_factor * DCTSIZE);
-  if (MCU_rows > 0)		/* can't trim to 0 pixels */
-    dstinfo->image_height = MCU_rows * (max_v_samp_factor * DCTSIZE);
+  if (number_of_tags == 0) return;
+  firstoffset += 2;
+
+  /* Search for ExifSubIFD offset Tag in IFD0 */
+  for (;;) {
+    if (firstoffset > length - 12) return; /* check end of data segment */
+    /* Get Tag number */
+    if (is_motorola) {
+      tagnum = GETJOCTET(data[firstoffset]);
+      tagnum <<= 8;
+      tagnum += GETJOCTET(data[firstoffset+1]);
+    } else {
+      tagnum = GETJOCTET(data[firstoffset+1]);
+      tagnum <<= 8;
+      tagnum += GETJOCTET(data[firstoffset]);
+    }
+    if (tagnum == 0x8769) break; /* found ExifSubIFD offset Tag */
+    if (--number_of_tags == 0) return;
+    firstoffset += 12;
+  }
+
+  /* Get the ExifSubIFD offset */
+  if (is_motorola) {
+    if (GETJOCTET(data[firstoffset+8]) != 0) return;
+    if (GETJOCTET(data[firstoffset+9]) != 0) return;
+    offset = GETJOCTET(data[firstoffset+10]);
+    offset <<= 8;
+    offset += GETJOCTET(data[firstoffset+11]);
+  } else {
+    if (GETJOCTET(data[firstoffset+11]) != 0) return;
+    if (GETJOCTET(data[firstoffset+10]) != 0) return;
+    offset = GETJOCTET(data[firstoffset+9]);
+    offset <<= 8;
+    offset += GETJOCTET(data[firstoffset+8]);
+  }
+  if (offset > length - 2) return; /* check end of data segment */
+
+  /* Get the number of directory entries contained in this SubIFD */
+  if (is_motorola) {
+    number_of_tags = GETJOCTET(data[offset]);
+    number_of_tags <<= 8;
+    number_of_tags += GETJOCTET(data[offset+1]);
+  } else {
+    number_of_tags = GETJOCTET(data[offset+1]);
+    number_of_tags <<= 8;
+    number_of_tags += GETJOCTET(data[offset]);
+  }
+  if (number_of_tags < 2) return;
+  offset += 2;
+
+  /* Search for ExifImageWidth and ExifImageHeight Tags in this SubIFD */
+  do {
+    if (offset > length - 12) return; /* check end of data segment */
+    /* Get Tag number */
+    if (is_motorola) {
+      tagnum = GETJOCTET(data[offset]);
+      tagnum <<= 8;
+      tagnum += GETJOCTET(data[offset+1]);
+    } else {
+      tagnum = GETJOCTET(data[offset+1]);
+      tagnum <<= 8;
+      tagnum += GETJOCTET(data[offset]);
+    }
+    if (tagnum == 0xA002 || tagnum == 0xA003) {
+      if (tagnum == 0xA002)
+	new_value = new_width; /* ExifImageWidth Tag */
+      else
+	new_value = new_height; /* ExifImageHeight Tag */
+      if (is_motorola) {
+	data[offset+2] = 0; /* Format = unsigned long (4 octets) */
+	data[offset+3] = 4;
+	data[offset+4] = 0; /* Number Of Components = 1 */
+	data[offset+5] = 0;
+	data[offset+6] = 0;
+	data[offset+7] = 1;
+	data[offset+8] = 0;
+	data[offset+9] = 0;
+	data[offset+10] = (JOCTET)((new_value >> 8) & 0xFF);
+	data[offset+11] = (JOCTET)(new_value & 0xFF);
+      } else {
+	data[offset+2] = 4; /* Format = unsigned long (4 octets) */
+	data[offset+3] = 0;
+	data[offset+4] = 1; /* Number Of Components = 1 */
+	data[offset+5] = 0;
+	data[offset+6] = 0;
+	data[offset+7] = 0;
+	data[offset+8] = (JOCTET)(new_value & 0xFF);
+	data[offset+9] = (JOCTET)((new_value >> 8) & 0xFF);
+	data[offset+10] = 0;
+	data[offset+11] = 0;
+      }
+    }
+    offset += 12;
+  } while (--number_of_tags);
 }
 
 
@@ -736,18 +1263,22 @@
 {
   /* If force-to-grayscale is requested, adjust destination parameters */
   if (info->force_grayscale) {
-    /* We use jpeg_set_colorspace to make sure subsidiary settings get fixed
-     * properly.  Among other things, the target h_samp_factor & v_samp_factor
-     * will get set to 1, which typically won't match the source.
-     * In fact we do this even if the source is already grayscale; that
-     * provides an easy way of coercing a grayscale JPEG with funny sampling
-     * factors to the customary 1,1.  (Some decoders fail on other factors.)
+    /* First, ensure we have YCbCr or grayscale data, and that the source's
+     * Y channel is full resolution.  (No reasonable person would make Y
+     * be less than full resolution, so actually coping with that case
+     * isn't worth extra code space.  But we check it to avoid crashing.)
      */
-    if ((dstinfo->jpeg_color_space == JCS_YCbCr &&
-	 dstinfo->num_components == 3) ||
-	(dstinfo->jpeg_color_space == JCS_GRAYSCALE &&
-	 dstinfo->num_components == 1)) {
-      /* We have to preserve the source's quantization table number. */
+    if (((dstinfo->jpeg_color_space == JCS_YCbCr &&
+	  dstinfo->num_components == 3) ||
+	 (dstinfo->jpeg_color_space == JCS_GRAYSCALE &&
+	  dstinfo->num_components == 1)) &&
+	srcinfo->comp_info[0].h_samp_factor == srcinfo->max_h_samp_factor &&
+	srcinfo->comp_info[0].v_samp_factor == srcinfo->max_v_samp_factor) {
+      /* We use jpeg_set_colorspace to make sure subsidiary settings get fixed
+       * properly.  Among other things, it sets the target h_samp_factor &
+       * v_samp_factor to 1, which typically won't match the source.
+       * We have to preserve the source's quantization table number, however.
+       */
       int sv_quant_tbl_no = dstinfo->comp_info[0].quant_tbl_no;
       jpeg_set_colorspace(dstinfo, JCS_GRAYSCALE);
       dstinfo->comp_info[0].quant_tbl_no = sv_quant_tbl_no;
@@ -755,50 +1286,52 @@
       /* Sorry, can't do it */
       ERREXIT(dstinfo, JERR_CONVERSION_NOTIMPL);
     }
+  } else if (info->num_components == 1) {
+    /* For a single-component source, we force the destination sampling factors
+     * to 1x1, with or without force_grayscale.  This is useful because some
+     * decoders choke on grayscale images with other sampling factors.
+     */
+    dstinfo->comp_info[0].h_samp_factor = 1;
+    dstinfo->comp_info[0].v_samp_factor = 1;
   }
 
-  /* Correct the destination's image dimensions etc if necessary */
+  /* Correct the destination's image dimensions as necessary
+   * for crop and rotate/flip operations.
+   */
+  dstinfo->image_width = info->output_width;
+  dstinfo->image_height = info->output_height;
+
+  /* Transpose destination image parameters */
   switch (info->transform) {
-  case JXFORM_NONE:
-    /* Nothing to do */
-    break;
-  case JXFORM_FLIP_H:
-    if (info->trim)
-      trim_right_edge(dstinfo);
-    break;
-  case JXFORM_FLIP_V:
-    if (info->trim)
-      trim_bottom_edge(dstinfo);
-    break;
   case JXFORM_TRANSPOSE:
-    transpose_critical_parameters(dstinfo);
-    /* transpose does NOT have to trim anything */
-    break;
   case JXFORM_TRANSVERSE:
-    transpose_critical_parameters(dstinfo);
-    if (info->trim) {
-      trim_right_edge(dstinfo);
-      trim_bottom_edge(dstinfo);
-    }
-    break;
   case JXFORM_ROT_90:
-    transpose_critical_parameters(dstinfo);
-    if (info->trim)
-      trim_right_edge(dstinfo);
-    break;
-  case JXFORM_ROT_180:
-    if (info->trim) {
-      trim_right_edge(dstinfo);
-      trim_bottom_edge(dstinfo);
-    }
-    break;
   case JXFORM_ROT_270:
     transpose_critical_parameters(dstinfo);
-    if (info->trim)
-      trim_bottom_edge(dstinfo);
     break;
   }
 
+  /* Adjust Exif properties */
+  if (srcinfo->marker_list != NULL &&
+      srcinfo->marker_list->marker == JPEG_APP0+1 &&
+      srcinfo->marker_list->data_length >= 6 &&
+      GETJOCTET(srcinfo->marker_list->data[0]) == 0x45 &&
+      GETJOCTET(srcinfo->marker_list->data[1]) == 0x78 &&
+      GETJOCTET(srcinfo->marker_list->data[2]) == 0x69 &&
+      GETJOCTET(srcinfo->marker_list->data[3]) == 0x66 &&
+      GETJOCTET(srcinfo->marker_list->data[4]) == 0 &&
+      GETJOCTET(srcinfo->marker_list->data[5]) == 0) {
+    /* Suppress output of JFIF marker */
+    dstinfo->write_JFIF_header = FALSE;
+    /* Adjust Exif image parameters */
+    if (dstinfo->image_width != srcinfo->image_width ||
+	dstinfo->image_height != srcinfo->image_height)
+      /* Align data segment to start of TIFF structure for parsing */
+      adjust_exif_parameters(srcinfo->marker_list->data + 6,
+	srcinfo->marker_list->data_length - 6,
+	dstinfo->image_width, dstinfo->image_height);
+  }
+
   /* Return the appropriate output data set */
   if (info->workspace_coef_arrays != NULL)
     return info->workspace_coef_arrays;
@@ -816,36 +1349,53 @@
  */
 
 GLOBAL(void)
-jtransform_execute_transformation (j_decompress_ptr srcinfo,
-				   j_compress_ptr dstinfo,
-				   jvirt_barray_ptr *src_coef_arrays,
-				   jpeg_transform_info *info)
+jtransform_execute_transform (j_decompress_ptr srcinfo,
+			      j_compress_ptr dstinfo,
+			      jvirt_barray_ptr *src_coef_arrays,
+			      jpeg_transform_info *info)
 {
   jvirt_barray_ptr *dst_coef_arrays = info->workspace_coef_arrays;
 
+  /* Note: conditions tested here should match those in switch statement
+   * in jtransform_request_workspace()
+   */
   switch (info->transform) {
   case JXFORM_NONE:
+    if (info->x_crop_offset != 0 || info->y_crop_offset != 0)
+      do_crop(srcinfo, dstinfo, info->x_crop_offset, info->y_crop_offset,
+	      src_coef_arrays, dst_coef_arrays);
     break;
   case JXFORM_FLIP_H:
-    do_flip_h(srcinfo, dstinfo, src_coef_arrays);
+    if (info->y_crop_offset != 0)
+      do_flip_h(srcinfo, dstinfo, info->x_crop_offset, info->y_crop_offset,
+		src_coef_arrays, dst_coef_arrays);
+    else
+      do_flip_h_no_crop(srcinfo, dstinfo, info->x_crop_offset,
+			src_coef_arrays);
     break;
   case JXFORM_FLIP_V:
-    do_flip_v(srcinfo, dstinfo, src_coef_arrays, dst_coef_arrays);
+    do_flip_v(srcinfo, dstinfo, info->x_crop_offset, info->y_crop_offset,
+	      src_coef_arrays, dst_coef_arrays);
     break;
   case JXFORM_TRANSPOSE:
-    do_transpose(srcinfo, dstinfo, src_coef_arrays, dst_coef_arrays);
+    do_transpose(srcinfo, dstinfo, info->x_crop_offset, info->y_crop_offset,
+		 src_coef_arrays, dst_coef_arrays);
     break;
   case JXFORM_TRANSVERSE:
-    do_transverse(srcinfo, dstinfo, src_coef_arrays, dst_coef_arrays);
+    do_transverse(srcinfo, dstinfo, info->x_crop_offset, info->y_crop_offset,
+		  src_coef_arrays, dst_coef_arrays);
     break;
   case JXFORM_ROT_90:
-    do_rot_90(srcinfo, dstinfo, src_coef_arrays, dst_coef_arrays);
+    do_rot_90(srcinfo, dstinfo, info->x_crop_offset, info->y_crop_offset,
+	      src_coef_arrays, dst_coef_arrays);
     break;
   case JXFORM_ROT_180:
-    do_rot_180(srcinfo, dstinfo, src_coef_arrays, dst_coef_arrays);
+    do_rot_180(srcinfo, dstinfo, info->x_crop_offset, info->y_crop_offset,
+	       src_coef_arrays, dst_coef_arrays);
     break;
   case JXFORM_ROT_270:
-    do_rot_270(srcinfo, dstinfo, src_coef_arrays, dst_coef_arrays);
+    do_rot_270(srcinfo, dstinfo, info->x_crop_offset, info->y_crop_offset,
+	       src_coef_arrays, dst_coef_arrays);
     break;
   }
 }
--- jpeg-6b/jerror.h~libjpeg6bb-5
+++ jpeg-6b/jerror.h
@@ -45,6 +45,7 @@
 JMESSAGE(JERR_BAD_ALLOC_CHUNK, "MAX_ALLOC_CHUNK is wrong, please fix")
 JMESSAGE(JERR_BAD_BUFFER_MODE, "Bogus buffer control mode")
 JMESSAGE(JERR_BAD_COMPONENT_ID, "Invalid component ID %d in SOS")
+JMESSAGE(JERR_BAD_CROP_SPEC, "Invalid crop request")
 JMESSAGE(JERR_BAD_DCT_COEF, "DCT coefficient out of range")
 JMESSAGE(JERR_BAD_DCTSIZE, "IDCT output block size %d not supported")
 JMESSAGE(JERR_BAD_HUFF_TABLE, "Bogus Huffman table definition")
--- jpeg-6b/transupp.h~libjpeg6bb-5
+++ jpeg-6b/transupp.h
@@ -1,7 +1,7 @@
 /*
  * transupp.h
  *
- * Copyright (C) 1997, Thomas G. Lane.
+ * Copyright (C) 1997-2001, Thomas G. Lane.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -22,32 +22,6 @@
 #define TRANSFORMS_SUPPORTED 1		/* 0 disables transform code */
 #endif
 
-/* Short forms of external names for systems with brain-damaged linkers. */
-
-#ifdef NEED_SHORT_EXTERNAL_NAMES
-#define jtransform_request_workspace		jTrRequest
-#define jtransform_adjust_parameters		jTrAdjust
-#define jtransform_execute_transformation	jTrExec
-#define jcopy_markers_setup			jCMrkSetup
-#define jcopy_markers_execute			jCMrkExec
-#endif /* NEED_SHORT_EXTERNAL_NAMES */
-
-
-/*
- * Codes for supported types of image transformations.
- */
-
-typedef enum {
-	JXFORM_NONE,		/* no transformation */
-	JXFORM_FLIP_H,		/* horizontal flip */
-	JXFORM_FLIP_V,		/* vertical flip */
-	JXFORM_TRANSPOSE,	/* transpose across UL-to-LR axis */
-	JXFORM_TRANSVERSE,	/* transpose across UR-to-LL axis */
-	JXFORM_ROT_90,		/* 90-degree clockwise rotation */
-	JXFORM_ROT_180,		/* 180-degree rotation */
-	JXFORM_ROT_270		/* 270-degree clockwise (or 90 ccw) */
-} JXFORM_CODE;
-
 /*
  * Although rotating and flipping data expressed as DCT coefficients is not
  * hard, there is an asymmetry in the JPEG format specification for images
@@ -75,6 +49,19 @@
  * (For example, -rot 270 -trim trims only the bottom edge, but -rot 90 -trim
  * followed by -rot 180 -trim trims both edges.)
  *
+ * We also offer a lossless-crop option, which discards data outside a given
+ * image region but losslessly preserves what is inside.  Like the rotate and
+ * flip transforms, lossless crop is restricted by the JPEG format: the upper
+ * left corner of the selected region must fall on an iMCU boundary.  If this
+ * does not hold for the given crop parameters, we silently move the upper left
+ * corner up and/or left to make it so, simultaneously increasing the region
+ * dimensions to keep the lower right crop corner unchanged.  (Thus, the
+ * output image covers at least the requested region, but may cover more.)
+ *
+ * If both crop and a rotate/flip transform are requested, the crop is applied
+ * last --- that is, the crop region is specified in terms of the destination
+ * image.
+ *
  * We also offer a "force to grayscale" option, which simply discards the
  * chrominance channels of a YCbCr image.  This is lossless in the sense that
  * the luminance channel is preserved exactly.  It's not the same kind of
@@ -83,20 +70,87 @@
  * be aware of the option to know how many components to work on.
  */
 
+
+/* Short forms of external names for systems with brain-damaged linkers. */
+
+#ifdef NEED_SHORT_EXTERNAL_NAMES
+#define jtransform_parse_crop_spec	jTrParCrop
+#define jtransform_request_workspace	jTrRequest
+#define jtransform_adjust_parameters	jTrAdjust
+#define jtransform_execute_transform	jTrExec
+#define jcopy_markers_setup		jCMrkSetup
+#define jcopy_markers_execute		jCMrkExec
+#endif /* NEED_SHORT_EXTERNAL_NAMES */
+
+
+/*
+ * Codes for supported types of image transformations.
+ */
+
+typedef enum {
+	JXFORM_NONE,		/* no transformation */
+	JXFORM_FLIP_H,		/* horizontal flip */
+	JXFORM_FLIP_V,		/* vertical flip */
+	JXFORM_TRANSPOSE,	/* transpose across UL-to-LR axis */
+	JXFORM_TRANSVERSE,	/* transpose across UR-to-LL axis */
+	JXFORM_ROT_90,		/* 90-degree clockwise rotation */
+	JXFORM_ROT_180,		/* 180-degree rotation */
+	JXFORM_ROT_270		/* 270-degree clockwise (or 90 ccw) */
+} JXFORM_CODE;
+
+/*
+ * Codes for crop parameters, which can individually be unspecified,
+ * positive, or negative.  (Negative width or height makes no sense, though.)
+ */
+
+typedef enum {
+	JCROP_UNSET,
+	JCROP_POS,
+	JCROP_NEG
+} JCROP_CODE;
+
+/*
+ * Transform parameters struct.
+ * NB: application must not change any elements of this struct after
+ * calling jtransform_request_workspace.
+ */
+
 typedef struct {
   /* Options: set by caller */
   JXFORM_CODE transform;	/* image transform operator */
   boolean trim;			/* if TRUE, trim partial MCUs as needed */
   boolean force_grayscale;	/* if TRUE, convert color image to grayscale */
+  boolean crop;			/* if TRUE, crop source image */
+
+  /* Crop parameters: application need not set these unless crop is TRUE.
+   * These can be filled in by jtransform_parse_crop_spec().
+   */
+  JDIMENSION crop_width;	/* Width of selected region */
+  JCROP_CODE crop_width_set;
+  JDIMENSION crop_height;	/* Height of selected region */
+  JCROP_CODE crop_height_set;
+  JDIMENSION crop_xoffset;	/* X offset of selected region */
+  JCROP_CODE crop_xoffset_set;	/* (negative measures from right edge) */
+  JDIMENSION crop_yoffset;	/* Y offset of selected region */
+  JCROP_CODE crop_yoffset_set;	/* (negative measures from bottom edge) */
 
   /* Internal workspace: caller should not touch these */
   int num_components;		/* # of components in workspace */
   jvirt_barray_ptr * workspace_coef_arrays; /* workspace for transformations */
+  JDIMENSION output_width;	/* cropped destination dimensions */
+  JDIMENSION output_height;
+  JDIMENSION x_crop_offset;	/* destination crop offsets measured in iMCUs */
+  JDIMENSION y_crop_offset;
+  int max_h_samp_factor;	/* destination iMCU size */
+  int max_v_samp_factor;
 } jpeg_transform_info;
 
 
 #if TRANSFORMS_SUPPORTED
 
+/* Parse a crop specification (written in X11 geometry style) */
+EXTERN(boolean) jtransform_parse_crop_spec
+	JPP((jpeg_transform_info *info, const char *spec));
 /* Request any required workspace */
 EXTERN(void) jtransform_request_workspace
 	JPP((j_decompress_ptr srcinfo, jpeg_transform_info *info));
@@ -106,11 +160,18 @@
 	     jvirt_barray_ptr *src_coef_arrays,
 	     jpeg_transform_info *info));
 /* Execute the actual transformation, if any */
-EXTERN(void) jtransform_execute_transformation
+EXTERN(void) jtransform_execute_transform
 	JPP((j_decompress_ptr srcinfo, j_compress_ptr dstinfo,
 	     jvirt_barray_ptr *src_coef_arrays,
 	     jpeg_transform_info *info));
 
+/* jtransform_execute_transform used to be called
+ * jtransform_execute_transformation, but some compilers complain about
+ * routine names that long.  This macro is here to avoid breaking any
+ * old source code that uses the original name...
+ */
+#define jtransform_execute_transformation	jtransform_execute_transform
+
 #endif /* TRANSFORMS_SUPPORTED */
 
 
--- jpeg-6b/config.guess~libjpeg6bb-5
+++ jpeg-6b/config.guess
@@ -1,4 +1,10 @@
 #! /bin/sh
+# autotools-dev hack (<ballombe@debian.org>, Wed, 14 Nov 2001 10:13:10 +0100)
+if [ -x /usr/share/misc/config.guess ]; then
+   /usr/share/misc/config.guess $*
+   exit $?
+fi
+
 # Attempt to guess a canonical system name.
 #   Copyright (C) 1992, 93, 94, 95, 96, 1997 Free Software Foundation, Inc.
 #
--- jpeg-6b/config.sub~libjpeg6bb-5
+++ jpeg-6b/config.sub
@@ -1,4 +1,10 @@
 #! /bin/sh
+# autotools-dev hack (<ballombe@debian.org>, Wed, 14 Nov 2001 10:13:10 +0100)
+if [ -x /usr/share/misc/config.sub ]; then
+   /usr/share/misc/config.sub $*
+   exit $?
+fi
+
 # Configuration validation subroutine script, version 1.1.
 #   Copyright (C) 1991, 92, 93, 94, 95, 96, 1997 Free Software Foundation, Inc.
 # This file is (in principle) common to ALL GNU software.
--- /dev/null
+++ jpeg-6b/libtool.cfg
@@ -0,0 +1,224 @@
+# libtool.cfg - Libtool configuration file.
+# Generated automatically by ltconfig (GNU libtool 1.3.3 (1.385.2.181 1999/07/02 15:49:11))
+# Libtool was configured as follows, on host yellowpig:
+#
+# CC="old_CC" CFLAGS="old_CFLAGS" CPPFLAGS="old_CPPFLAGS" \
+# LD="old_LD" LDFLAGS="old_LDFLAGS" LIBS="old_LIBS" \
+# NM="old_NM" RANLIB="old_RANLIB" LN_S="old_LN_S" \
+# DLLTOOL="old_DLLTOOL" OBJDUMP="old_OBJDUMP" AS="old_AS" \
+#   ./ltconfig.new ./ltmain.sh.new i386-gnu
+#
+# Compiler and other test output produced by ltconfig.new, useful for
+# debugging ltconfig.new, is in ./config.log if it exists.
+
+# The version of ltconfig.new that generated this script.
+LTCONFIG_VERSION=1.3.3
+
+# Shell to use when invoking shell scripts.
+SHELL=/bin/sh
+
+# Whether or not to build shared libraries.
+build_libtool_libs=yes
+
+# Whether or not to build static libraries.
+build_old_libs=yes
+
+# Whether or not to optimize for fast installation.
+fast_install=yes
+
+# The host system.
+host_alias=i386-gnu
+host=i386-pc-gnu
+
+# An echo program that does not interpret backslashes.
+echo=echo
+
+# The archiver.
+AR=ar
+
+# The default C compiler.
+CC=gcc
+
+# The linker used to build libraries.
+LD=/usr/bin/ld
+
+# Whether we need hard or soft links.
+LN_S=ln -s
+
+# A BSD-compatible nm program.
+NM=/usr/bin/nm -B
+
+# Used on cygwin: DLL creation program.
+DLLTOOL="dlltool"
+
+# Used on cygwin: object dumper.
+OBJDUMP="objdump"
+
+# Used on cygwin: assembler.
+AS="as"
+
+# The name of the directory that contains temporary libtool files.
+objdir=.libs
+
+# How to create reloadable object files.
+reload_flag= -r
+reload_cmds=$LD$reload_flag -o $output$reload_objs
+
+# How to pass a linker flag through the compiler.
+wl=-Wl,
+
+# Object file suffix (normally "o").
+objext="o"
+
+# Old archive suffix (normally "a").
+libext="a"
+
+# Executable file suffix (normally "").
+exeext=""
+
+# Additional compiler flags for building library objects.
+pic_flag= -fPIC
+
+# Does compiler simultaneously support -c and -o options?
+compiler_c_o=yes
+
+# Can we write directly to a .lo ?
+compiler_o_lo=yes
+
+# Must we lock files when doing compilation ?
+need_locks=no
+
+# Do we need the lib prefix for modules?
+need_lib_prefix=no
+
+# Do we need a version for libraries?
+need_version=no
+
+# Whether dlopen is supported.
+dlopen=unknown
+
+# Whether dlopen of programs is supported.
+dlopen_self=unknown
+
+# Whether dlopen of statically linked programs is supported.
+dlopen_self_static=unknown
+
+# Compiler flag to prevent dynamic linking.
+link_static_flag=-static
+
+# Compiler flag to turn off builtin functions.
+no_builtin_flag= -fno-builtin -fno-rtti -fno-exceptions
+
+# Compiler flag to allow reflexive dlopens.
+export_dynamic_flag_spec=${wl}--export-dynamic
+
+# Compiler flag to generate shared objects directly from archives.
+whole_archive_flag_spec=${wl}--whole-archive$convenience ${wl}--no-whole-archive
+
+# Compiler flag to generate thread-safe objects.
+thread_safe_flag_spec=
+
+# Library versioning type.
+version_type=linux
+
+# Format of library name prefix.
+libname_spec=lib$name
+
+# List of archive names.  First name is the real one, the rest are links.
+# The last name is the one that the linker finds with -lNAME.
+library_names_spec=${libname}${release}.so$versuffix ${libname}${release}.so${major} ${libname}.so
+
+# The coded name of the library, if different from the real name.
+soname_spec=${libname}${release}.so$major
+
+# Commands used to build and install an old-style archive.
+RANLIB=ranlib
+old_archive_cmds=$AR cru $oldlib$oldobjs~$RANLIB $oldlib
+old_postinstall_cmds=$RANLIB $oldlib~chmod 644 $oldlib
+old_postuninstall_cmds=
+
+# Create an old-style archive from a shared archive.
+old_archive_from_new_cmds=
+
+# Commands used to build and install a shared archive.
+archive_cmds=$CC -shared $libobjs $deplibs $linkopts ${wl}-soname $wl$soname -o $lib
+archive_expsym_cmds=$CC -shared $libobjs $deplibs $linkopts ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib
+postinstall_cmds=
+postuninstall_cmds=
+
+# Method to check whether dependent libraries are shared objects.
+deplibs_check_method=unknown
+
+# Command to use when deplibs_check_method == file_magic.
+file_magic_cmd=
+
+# Flag that allows shared libraries with undefined symbols to be built.
+allow_undefined_flag=
+
+# Flag that forces no undefined symbols.
+no_undefined_flag=
+
+# Commands used to finish a libtool library installation in a directory.
+finish_cmds=
+
+# Same as above, but a single script fragment to be evaled but not shown.
+finish_eval=
+
+# Take the output of nm and produce a listing of raw symbols and C names.
+global_symbol_pipe=sed -n -e 's/^.*[ 	]\([ABCDGISTW]\)[ 	][ 	]*\(\)\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2\3 \3/p'
+
+# Transform the output of nm in a proper C declaration
+global_symbol_to_cdecl=sed -n -e 's/^. .* \(.*\)$/extern char \1;/p'
+
+# This is the shared library runtime path variable.
+runpath_var=LD_RUN_PATH
+
+# This is the shared library path variable.
+shlibpath_var=LD_LIBRARY_PATH
+
+# Is shlibpath searched before the hard-coded library search path?
+shlibpath_overrides_runpath=unknown
+
+# How to hardcode a shared library path into an executable.
+hardcode_action=immediate
+
+# Flag to hardcode $libdir into a binary during linking.
+# This must work even if $libdir does not exist.
+hardcode_libdir_flag_spec=${wl}--rpath ${wl}$libdir
+
+# Whether we need a single -rpath flag with a separated argument.
+hardcode_libdir_separator=
+
+# Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the
+# resulting binary.
+hardcode_direct=no
+
+# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
+# resulting binary.
+hardcode_minus_L=no
+
+# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
+# the resulting binary.
+hardcode_shlibpath_var=unsupported
+
+# Compile-time system search path for libraries
+sys_lib_search_path_spec=/lib /usr/lib /usr/local/lib
+
+# Run-time system search path for libraries
+sys_lib_dlsearch_path_spec=/lib /usr/lib
+
+# Fix the shell variable $srcfile for the compiler.
+fix_srcfile_path=""
+
+# Set to yes if exported symbols are required.
+always_export_symbols=no
+
+# The commands to list exported symbols.
+export_symbols_cmds=$NM $libobjs $convenience | $global_symbol_pipe | sed 's/.* //' | sort | uniq > $export_symbols
+
+# Symbols that should not be listed in the preloaded symbols.
+exclude_expsyms=_GLOBAL_OFFSET_TABLE_
+
+# Symbols that must always be exported.
+include_expsyms=
+
--- /dev/null
+++ jpeg-6b/ltmain.new.sh
@@ -0,0 +1,3975 @@
+# ltmain.sh - Provide generalized library-building support services.
+# NOTE: Changing this file will not affect anything until you rerun ltconfig.
+#
+# Copyright (C) 1996-1999 Free Software Foundation, Inc.
+# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# Check that we have a working $echo.
+if test "X$1" = X--no-reexec; then
+  # Discard the --no-reexec flag, and continue.
+  shift
+elif test "X$1" = X--fallback-echo; then
+  # Avoid inline document here, it may be left over
+  :
+elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then
+  # Yippee, $echo works!
+  :
+else
+  # Restart under the correct shell, and then maybe $echo will work.
+  exec $SHELL "$0" --no-reexec ${1+"$@"}
+fi
+
+if test "X$1" = X--fallback-echo; then
+  # used as fallback echo
+  shift
+  cat <<EOF
+$*
+EOF
+  exit 0
+fi
+
+# The name of this program.
+progname=`$echo "$0" | sed 's%^.*/%%'`
+modename="$progname"
+
+# Constants.
+PROGRAM=ltmain.sh
+PACKAGE=libtool
+VERSION=1.3.3
+TIMESTAMP=" (1.385.2.181 1999/07/02 15:49:11)"
+
+default_mode=
+help="Try \`$progname --help' for more information."
+magic="%%%MAGIC variable%%%"
+mkdir="mkdir"
+mv="mv -f"
+rm="rm -f"
+
+# Sed substitution that helps us do robust quoting.  It backslashifies
+# metacharacters that are still active within double-quoted strings.
+Xsed='sed -e 1s/^X//'
+sed_quote_subst='s/\([\\`\\"$\\\\]\)/\\\1/g'
+SP2NL='tr \040 \012'
+NL2SP='tr \015\012 \040\040'
+
+# NLS nuisances.
+# Only set LANG and LC_ALL to C if already set.
+# These must not be set unconditionally because not all systems understand
+# e.g. LANG=C (notably SCO).
+# We save the old values to restore during execute mode.
+if test "${LC_ALL+set}" = set; then
+  save_LC_ALL="$LC_ALL"; LC_ALL=C; export LC_ALL
+fi
+if test "${LANG+set}" = set; then
+  save_LANG="$LANG"; LANG=C; export LANG
+fi
+
+if test "$LTCONFIG_VERSION" != "$VERSION"; then
+  echo "$modename: ltconfig version \`$LTCONFIG_VERSION' does not match $PROGRAM version \`$VERSION'" 1>&2
+  echo "Fatal configuration error.  See the $PACKAGE docs for more information." 1>&2
+  exit 1
+fi
+
+if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
+  echo "$modename: not configured to build any kind of library" 1>&2
+  echo "Fatal configuration error.  See the $PACKAGE docs for more information." 1>&2
+  exit 1
+fi
+
+# Global variables.
+mode=$default_mode
+nonopt=
+prev=
+prevopt=
+run=
+show="$echo"
+show_help=
+execute_dlfiles=
+lo2o="s/\\.lo\$/.${objext}/"
+o2lo="s/\\.${objext}\$/.lo/"
+
+# Parse our command line options once, thoroughly.
+while test $# -gt 0
+do
+  arg="$1"
+  shift
+
+  case "$arg" in
+  -*=*) optarg=`$echo "X$arg" | $Xsed -e 's/[-_a-zA-Z0-9]*=//'` ;;
+  *) optarg= ;;
+  esac
+
+  # If the previous option needs an argument, assign it.
+  if test -n "$prev"; then
+    case "$prev" in
+    execute_dlfiles)
+      eval "$prev=\"\$$prev \$arg\""
+      ;;
+    *)
+      eval "$prev=\$arg"
+      ;;
+    esac
+
+    prev=
+    prevopt=
+    continue
+  fi
+
+  # Have we seen a non-optional argument yet?
+  case "$arg" in
+  --help)
+    show_help=yes
+    ;;
+
+  --version)
+    echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP"
+    exit 0
+    ;;
+
+  --config)
+    sed -e '1,/^### BEGIN LIBTOOL CONFIG/d' -e '/^### END LIBTOOL CONFIG/,$d' $0
+    exit 0
+    ;;
+
+  --debug)
+    echo "$progname: enabling shell trace mode"
+    set -x
+    ;;
+
+  --dry-run | -n)
+    run=:
+    ;;
+
+  --features)
+    echo "host: $host"
+    if test "$build_libtool_libs" = yes; then
+      echo "enable shared libraries"
+    else
+      echo "disable shared libraries"
+    fi
+    if test "$build_old_libs" = yes; then
+      echo "enable static libraries"
+    else
+      echo "disable static libraries"
+    fi
+    exit 0
+    ;;
+
+  --finish) mode="finish" ;;
+
+  --mode) prevopt="--mode" prev=mode ;;
+  --mode=*) mode="$optarg" ;;
+
+  --quiet | --silent)
+    show=:
+    ;;
+
+  -dlopen)
+    prevopt="-dlopen"
+    prev=execute_dlfiles
+    ;;
+
+  -*)
+    $echo "$modename: unrecognized option \`$arg'" 1>&2
+    $echo "$help" 1>&2
+    exit 1
+    ;;
+
+  *)
+    nonopt="$arg"
+    break
+    ;;
+  esac
+done
+
+if test -n "$prevopt"; then
+  $echo "$modename: option \`$prevopt' requires an argument" 1>&2
+  $echo "$help" 1>&2
+  exit 1
+fi
+
+if test -z "$show_help"; then
+
+  # Infer the operation mode.
+  if test -z "$mode"; then
+    case "$nonopt" in
+    *cc | *++ | gcc* | *-gcc*)
+      mode=link
+      for arg
+      do
+	case "$arg" in
+	-c)
+	   mode=compile
+	   break
+	   ;;
+	esac
+      done
+      ;;
+    *db | *dbx | *strace | *truss)
+      mode=execute
+      ;;
+    *install*|cp|mv)
+      mode=install
+      ;;
+    *rm)
+      mode=uninstall
+      ;;
+    *)
+      # If we have no mode, but dlfiles were specified, then do execute mode.
+      test -n "$execute_dlfiles" && mode=execute
+
+      # Just use the default operation mode.
+      if test -z "$mode"; then
+	if test -n "$nonopt"; then
+	  $echo "$modename: warning: cannot infer operation mode from \`$nonopt'" 1>&2
+	else
+	  $echo "$modename: warning: cannot infer operation mode without MODE-ARGS" 1>&2
+	fi
+      fi
+      ;;
+    esac
+  fi
+
+  # Only execute mode is allowed to have -dlopen flags.
+  if test -n "$execute_dlfiles" && test "$mode" != execute; then
+    $echo "$modename: unrecognized option \`-dlopen'" 1>&2
+    $echo "$help" 1>&2
+    exit 1
+  fi
+
+  # Change the help message to a mode-specific one.
+  generic_help="$help"
+  help="Try \`$modename --help --mode=$mode' for more information."
+
+  # These modes are in order of execution frequency so that they run quickly.
+  case "$mode" in
+  # libtool compile mode
+  compile)
+    modename="$modename: compile"
+    # Get the compilation command and the source file.
+    base_compile=
+    lastarg=
+    srcfile="$nonopt"
+    suppress_output=
+
+    user_target=no
+    for arg
+    do
+      # Accept any command-line options.
+      case "$arg" in
+      -o)
+	if test "$user_target" != "no"; then
+	  $echo "$modename: you cannot specify \`-o' more than once" 1>&2
+	  exit 1
+	fi
+	user_target=next
+	;;
+
+      -static)
+	build_old_libs=yes
+	continue
+	;;
+      esac
+
+      case "$user_target" in
+      next)
+	# The next one is the -o target name
+	user_target=yes
+	continue
+	;;
+      yes)
+	# We got the output file
+	user_target=set
+	libobj="$arg"
+	continue
+	;;
+      esac
+
+      # Accept the current argument as the source file.
+      lastarg="$srcfile"
+      srcfile="$arg"
+
+      # Aesthetically quote the previous argument.
+
+      # Backslashify any backslashes, double quotes, and dollar signs.
+      # These are the only characters that are still specially
+      # interpreted inside of double-quoted scrings.
+      lastarg=`$echo "X$lastarg" | $Xsed -e "$sed_quote_subst"`
+
+      # Double-quote args containing other shell metacharacters.
+      # Many Bourne shells cannot handle close brackets correctly in scan
+      # sets, so we specify it separately.
+      case "$lastarg" in
+      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*)
+	lastarg="\"$lastarg\""
+	;;
+      esac
+
+      # Add the previous argument to base_compile.
+      if test -z "$base_compile"; then
+	base_compile="$lastarg"
+      else
+	base_compile="$base_compile $lastarg"
+      fi
+    done
+
+    case "$user_target" in
+    set)
+      ;;
+    no)
+      # Get the name of the library object.
+      libobj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%'`
+      ;;
+    *)
+      $echo "$modename: you must specify a target with \`-o'" 1>&2
+      exit 1
+      ;;
+    esac
+
+    # Recognize several different file suffixes.
+    # If the user specifies -o file.o, it is replaced with file.lo
+    xform='[cCFSfmso]'
+    case "$libobj" in
+    *.ada) xform=ada ;;
+    *.adb) xform=adb ;;
+    *.ads) xform=ads ;;
+    *.asm) xform=asm ;;
+    *.c++) xform=c++ ;;
+    *.cc) xform=cc ;;
+    *.cpp) xform=cpp ;;
+    *.cxx) xform=cxx ;;
+    *.f90) xform=f90 ;;
+    *.for) xform=for ;;
+    esac
+
+    libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"`
+
+    case "$libobj" in
+    *.lo) obj=`$echo "X$libobj" | $Xsed -e "$lo2o"` ;;
+    *)
+      $echo "$modename: cannot determine name of library object from \`$libobj'" 1>&2
+      exit 1
+      ;;
+    esac
+
+    if test -z "$base_compile"; then
+      $echo "$modename: you must specify a compilation command" 1>&2
+      $echo "$help" 1>&2
+      exit 1
+    fi
+
+    # Delete any leftover library objects.
+    if test "$build_old_libs" = yes; then
+      removelist="$obj $libobj"
+    else
+      removelist="$libobj"
+    fi
+
+    $run $rm $removelist
+    trap "$run $rm $removelist; exit 1" 1 2 15
+
+    # Calculate the filename of the output object if compiler does
+    # not support -o with -c
+    if test "$compiler_c_o" = no; then
+      output_obj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\..*$%%'`.${objext}
+      lockfile="$output_obj.lock"
+      removelist="$removelist $output_obj $lockfile"
+      trap "$run $rm $removelist; exit 1" 1 2 15
+    else
+      need_locks=no
+      lockfile=
+    fi
+
+    # Lock this critical section if it is needed
+    # We use this script file to make the link, it avoids creating a new file
+    if test "$need_locks" = yes; then
+      until ln "$0" "$lockfile" 2>/dev/null; do
+	$show "Waiting for $lockfile to be removed"
+	sleep 2
+      done
+    elif test "$need_locks" = warn; then
+      if test -f "$lockfile"; then
+	echo "\
+*** ERROR, $lockfile exists and contains:
+`cat $lockfile 2>/dev/null`
+
+This indicates that another process is trying to use the same
+temporary object file, and libtool could not work around it because
+your compiler does not support \`-c' and \`-o' together.  If you
+repeat this compilation, it may succeed, by chance, but you had better
+avoid parallel builds (make -j) in this platform, or get a better
+compiler."
+
+	$run $rm $removelist
+	exit 1
+      fi
+      echo $srcfile > "$lockfile"
+    fi
+
+    if test -n "$fix_srcfile_path"; then
+      eval srcfile=\"$fix_srcfile_path\"
+    fi
+
+    # Only build a PIC object if we are building libtool libraries.
+    if test "$build_libtool_libs" = yes; then
+      # Without this assignment, base_compile gets emptied.
+      fbsd_hideous_sh_bug=$base_compile
+
+      # All platforms use -DPIC, to notify preprocessed assembler code.
+      command="$base_compile $pic_flag -DPIC $srcfile"
+      if test "$build_old_libs" = yes; then
+	lo_libobj="$libobj"
+	dir=`$echo "X$libobj" | $Xsed -e 's%/[^/]*$%%'`
+	if test "X$dir" = "X$libobj"; then
+	  dir="$objdir"
+	else
+	  dir="$dir/$objdir"
+	fi
+	libobj="$dir/"`$echo "X$libobj" | $Xsed -e 's%^.*/%%'`
+
+	if test -d "$dir"; then
+	  $show "$rm $libobj"
+	  $run $rm $libobj
+	else
+	  $show "$mkdir $dir"
+	  $run $mkdir $dir
+	  status=$?
+	  if test $status -ne 0 && test ! -d $dir; then
+	    exit $status
+	  fi
+	fi
+      fi
+      if test "$compiler_o_lo" = yes; then
+	output_obj="$libobj"
+	command="$command -o $output_obj"
+      elif test "$compiler_c_o" = yes; then
+	output_obj="$obj"
+	command="$command -o $output_obj"
+      fi
+
+      $run $rm "$output_obj"
+      $show "$command"
+      if $run eval "$command"; then :
+      else
+	test -n "$output_obj" && $run $rm $removelist
+	exit 1
+      fi
+
+      if test "$need_locks" = warn &&
+	 test x"`cat $lockfile 2>/dev/null`" != x"$srcfile"; then
+	echo "\
+*** ERROR, $lockfile contains:
+`cat $lockfile 2>/dev/null`
+
+but it should contain:
+$srcfile
+
+This indicates that another process is trying to use the same
+temporary object file, and libtool could not work around it because
+your compiler does not support \`-c' and \`-o' together.  If you
+repeat this compilation, it may succeed, by chance, but you had better
+avoid parallel builds (make -j) in this platform, or get a better
+compiler."
+
+	$run $rm $removelist
+	exit 1
+      fi
+
+      # Just move the object if needed, then go on to compile the next one
+      if test x"$output_obj" != x"$libobj"; then
+	$show "$mv $output_obj $libobj"
+	if $run $mv $output_obj $libobj; then :
+	else
+	  error=$?
+	  $run $rm $removelist
+	  exit $error
+	fi
+      fi
+
+      # If we have no pic_flag, then copy the object into place and finish.
+      if test -z "$pic_flag" && test "$build_old_libs" = yes; then
+	# Rename the .lo from within objdir to obj
+	if test -f $obj; then
+	  $show $rm $obj
+	  $run $rm $obj
+	fi
+
+	$show "$mv $libobj $obj"
+	if $run $mv $libobj $obj; then :
+	else
+	  error=$?
+	  $run $rm $removelist
+	  exit $error
+	fi
+
+	# Now arrange that obj and lo_libobj become the same file
+	$show "$LN_S $obj $lo_libobj"
+	if $run $LN_S $obj $lo_libobj; then
+	  exit 0
+	else
+	  error=$?
+	  $run $rm $removelist
+	  exit $error
+	fi
+      fi
+
+      # Allow error messages only from the first compilation.
+      suppress_output=' >/dev/null 2>&1'
+    fi
+
+    # Only build a position-dependent object if we build old libraries.
+    if test "$build_old_libs" = yes; then
+      command="$base_compile $srcfile"
+      if test "$compiler_c_o" = yes; then
+	command="$command -o $obj"
+	output_obj="$obj"
+      fi
+
+      # Suppress compiler output if we already did a PIC compilation.
+      command="$command$suppress_output"
+      $run $rm "$output_obj"
+      $show "$command"
+      if $run eval "$command"; then :
+      else
+	$run $rm $removelist
+	exit 1
+      fi
+
+      if test "$need_locks" = warn &&
+	 test x"`cat $lockfile 2>/dev/null`" != x"$srcfile"; then
+	echo "\
+*** ERROR, $lockfile contains:
+`cat $lockfile 2>/dev/null`
+
+but it should contain:
+$srcfile
+
+This indicates that another process is trying to use the same
+temporary object file, and libtool could not work around it because
+your compiler does not support \`-c' and \`-o' together.  If you
+repeat this compilation, it may succeed, by chance, but you had better
+avoid parallel builds (make -j) in this platform, or get a better
+compiler."
+
+	$run $rm $removelist
+	exit 1
+      fi
+
+      # Just move the object if needed
+      if test x"$output_obj" != x"$obj"; then
+	$show "$mv $output_obj $obj"
+	if $run $mv $output_obj $obj; then :
+	else
+	  error=$?
+	  $run $rm $removelist
+	  exit $error
+	fi
+      fi
+
+      # Create an invalid libtool object if no PIC, so that we do not
+      # accidentally link it into a program.
+      if test "$build_libtool_libs" != yes; then
+	$show "echo timestamp > $libobj"
+	$run eval "echo timestamp > \$libobj" || exit $?
+      else
+	# Move the .lo from within objdir
+	$show "$mv $libobj $lo_libobj"
+	if $run $mv $libobj $lo_libobj; then :
+	else
+	  error=$?
+	  $run $rm $removelist
+	  exit $error
+	fi
+      fi
+    fi
+
+    # Unlock the critical section if it was locked
+    if test "$need_locks" != no; then
+      $rm "$lockfile"
+    fi
+
+    exit 0
+    ;;
+
+  # libtool link mode
+  link)
+    modename="$modename: link"
+    C_compiler="$CC" # save it, to compile generated C sources
+    CC="$nonopt"
+    case "$host" in
+    *-*-cygwin* | *-*-mingw* | *-*-os2*)
+      # It is impossible to link a dll without this setting, and
+      # we shouldn't force the makefile maintainer to figure out
+      # which system we are compiling for in order to pass an extra
+      # flag for every libtool invokation.
+      # allow_undefined=no
+
+      # FIXME: Unfortunately, there are problems with the above when trying
+      # to make a dll which has undefined symbols, in which case not
+      # even a static library is built.  For now, we need to specify
+      # -no-undefined on the libtool link line when we can be certain
+      # that all symbols are satisfied, otherwise we get a static library.
+      allow_undefined=yes
+
+      # This is a source program that is used to create dlls on Windows
+      # Don't remove nor modify the starting and closing comments
+# /* ltdll.c starts here */
+# #define WIN32_LEAN_AND_MEAN
+# #include <windows.h>
+# #undef WIN32_LEAN_AND_MEAN
+# #include <stdio.h>
+#
+# #ifndef __CYGWIN__
+# #  ifdef __CYGWIN32__
+# #    define __CYGWIN__ __CYGWIN32__
+# #  endif
+# #endif
+#
+# #ifdef __cplusplus
+# extern "C" {
+# #endif
+# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved);
+# #ifdef __cplusplus
+# }
+# #endif
+#
+# #ifdef __CYGWIN__
+# #include <cygwin/cygwin_dll.h>
+# DECLARE_CYGWIN_DLL( DllMain );
+# #endif
+# HINSTANCE __hDllInstance_base;
+#
+# BOOL APIENTRY
+# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved)
+# {
+#   __hDllInstance_base = hInst;
+#   return TRUE;
+# }
+# /* ltdll.c ends here */
+      # This is a source program that is used to create import libraries
+      # on Windows for dlls which lack them. Don't remove nor modify the
+      # starting and closing comments
+# /* impgen.c starts here */
+# /*   Copyright (C) 1999 Free Software Foundation, Inc.
+# 
+#  This file is part of GNU libtool.
+# 
+#  This program is free software; you can redistribute it and/or modify
+#  it under the terms of the GNU General Public License as published by
+#  the Free Software Foundation; either version 2 of the License, or
+#  (at your option) any later version.
+# 
+#  This program is distributed in the hope that it will be useful,
+#  but WITHOUT ANY WARRANTY; without even the implied warranty of
+#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#  GNU General Public License for more details.
+# 
+#  You should have received a copy of the GNU General Public License
+#  along with this program; if not, write to the Free Software
+#  Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+#  */
+# 
+#  #include <stdio.h>		/* for printf() */
+#  #include <unistd.h>		/* for open(), lseek(), read() */
+#  #include <fcntl.h>		/* for O_RDONLY, O_BINARY */
+#  #include <string.h>		/* for strdup() */
+# 
+#  static unsigned int
+#  pe_get16 (fd, offset)
+#       int fd;
+#       int offset;
+#  {
+#    unsigned char b[2];
+#    lseek (fd, offset, SEEK_SET);
+#    read (fd, b, 2);
+#    return b[0] + (b[1]<<8);
+#  }
+# 
+#  static unsigned int
+#  pe_get32 (fd, offset)
+#      int fd;
+#      int offset;
+#  {
+#    unsigned char b[4];
+#    lseek (fd, offset, SEEK_SET);
+#    read (fd, b, 4);
+#    return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24);
+#  }
+# 
+#  static unsigned int
+#  pe_as32 (ptr)
+#       void *ptr;
+#  {
+#    unsigned char *b = ptr;
+#    return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24);
+#  }
+# 
+#  int
+#  main (argc, argv)
+#      int argc;
+#      char *argv[];
+#  {
+#      int dll;
+#      unsigned long pe_header_offset, opthdr_ofs, num_entries, i;
+#      unsigned long export_rva, export_size, nsections, secptr, expptr;
+#      unsigned long name_rvas, nexp;
+#      unsigned char *expdata, *erva;
+#      char *filename, *dll_name;
+# 
+#      filename = argv[1];
+# 
+#      dll = open(filename, O_RDONLY|O_BINARY);
+#      if (!dll)
+#  	return 1;
+# 
+#      dll_name = filename;
+#    
+#      for (i=0; filename[i]; i++)
+#  	if (filename[i] == '/' || filename[i] == '\\'  || filename[i] == ':')
+#  	    dll_name = filename + i +1;
+# 
+#      pe_header_offset = pe_get32 (dll, 0x3c);
+#      opthdr_ofs = pe_header_offset + 4 + 20;
+#      num_entries = pe_get32 (dll, opthdr_ofs + 92);
+# 
+#      if (num_entries < 1) /* no exports */
+#  	return 1;
+# 
+#      export_rva = pe_get32 (dll, opthdr_ofs + 96);
+#      export_size = pe_get32 (dll, opthdr_ofs + 100);
+#      nsections = pe_get16 (dll, pe_header_offset + 4 +2);
+#      secptr = (pe_header_offset + 4 + 20 +
+#  	      pe_get16 (dll, pe_header_offset + 4 + 16));
+# 
+#      expptr = 0;
+#      for (i = 0; i < nsections; i++)
+#      {
+#  	char sname[8];
+#  	unsigned long secptr1 = secptr + 40 * i;
+#  	unsigned long vaddr = pe_get32 (dll, secptr1 + 12);
+#  	unsigned long vsize = pe_get32 (dll, secptr1 + 16);
+#  	unsigned long fptr = pe_get32 (dll, secptr1 + 20);
+#  	lseek(dll, secptr1, SEEK_SET);
+#  	read(dll, sname, 8);
+#  	if (vaddr <= export_rva && vaddr+vsize > export_rva)
+#  	{
+#  	    expptr = fptr + (export_rva - vaddr);
+#  	    if (export_rva + export_size > vaddr + vsize)
+#  		export_size = vsize - (export_rva - vaddr);
+#  	    break;
+#  	}
+#      }
+# 
+#      expdata = (unsigned char*)malloc(export_size);
+#      lseek (dll, expptr, SEEK_SET);
+#      read (dll, expdata, export_size);
+#      erva = expdata - export_rva;
+# 
+#      nexp = pe_as32 (expdata+24);
+#      name_rvas = pe_as32 (expdata+32);
+# 
+#      printf ("EXPORTS\n");
+#      for (i = 0; i<nexp; i++)
+#      {
+#  	unsigned long name_rva = pe_as32 (erva+name_rvas+i*4);
+#  	printf ("\t%s @ %ld ;\n", erva+name_rva, 1+ i);
+#      }
+# 
+#      return 0;
+#  }
+# /* impgen.c ends here */
+      ;;
+    *)
+      allow_undefined=yes
+      ;;
+    esac
+    compile_command="$CC"
+    finalize_command="$CC"
+
+    compile_rpath=
+    finalize_rpath=
+    compile_shlibpath=
+    finalize_shlibpath=
+    convenience=
+    old_convenience=
+    deplibs=
+    linkopts=
+
+    if test -n "$shlibpath_var"; then
+      # get the directories listed in $shlibpath_var
+      eval lib_search_path=\`\$echo \"X \${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\`
+    else
+      lib_search_path=
+    fi
+    # now prepend the system-specific ones
+    eval lib_search_path=\"$sys_lib_search_path_spec\$lib_search_path\"
+    eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\"
+    
+    avoid_version=no
+    dlfiles=
+    dlprefiles=
+    dlself=no
+    export_dynamic=no
+    export_symbols=
+    export_symbols_regex=
+    generated=
+    libobjs=
+    link_against_libtool_libs=
+    ltlibs=
+    module=no
+    objs=
+    prefer_static_libs=no
+    preload=no
+    prev=
+    prevarg=
+    release=
+    rpath=
+    xrpath=
+    perm_rpath=
+    temp_rpath=
+    thread_safe=no
+    vinfo=
+
+    # We need to know -static, to get the right output filenames.
+    for arg
+    do
+      case "$arg" in
+      -all-static | -static)
+	if test "X$arg" = "X-all-static"; then
+	  if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then
+	    $echo "$modename: warning: complete static linking is impossible in this configuration" 1>&2
+	  fi
+	  if test -n "$link_static_flag"; then
+	    dlopen_self=$dlopen_self_static
+	  fi
+	else
+	  if test -z "$pic_flag" && test -n "$link_static_flag"; then
+	    dlopen_self=$dlopen_self_static
+	  fi
+	fi
+	build_libtool_libs=no
+	build_old_libs=yes
+	prefer_static_libs=yes
+	break
+	;;
+      esac
+    done
+
+    # See if our shared archives depend on static archives.
+    test -n "$old_archive_from_new_cmds" && build_old_libs=yes
+
+    # Go through the arguments, transforming them on the way.
+    while test $# -gt 0; do
+      arg="$1"
+      shift
+
+      # If the previous option needs an argument, assign it.
+      if test -n "$prev"; then
+	case "$prev" in
+	output)
+	  compile_command="$compile_command @OUTPUT@"
+	  finalize_command="$finalize_command @OUTPUT@"
+	  ;;
+	esac
+
+	case "$prev" in
+	dlfiles|dlprefiles)
+	  if test "$preload" = no; then
+	    # Add the symbol object into the linking commands.
+	    compile_command="$compile_command @SYMFILE@"
+	    finalize_command="$finalize_command @SYMFILE@"
+	    preload=yes
+	  fi
+	  case "$arg" in
+	  *.la | *.lo) ;;  # We handle these cases below.
+	  force)
+	    if test "$dlself" = no; then
+	      dlself=needless
+	      export_dynamic=yes
+	    fi
+	    prev=
+	    continue
+	    ;;
+	  self)
+	    if test "$prev" = dlprefiles; then
+	      dlself=yes
+	    elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then
+	      dlself=yes
+	    else
+	      dlself=needless
+	      export_dynamic=yes
+	    fi
+	    prev=
+	    continue
+	    ;;
+	  *)
+	    if test "$prev" = dlfiles; then
+	      dlfiles="$dlfiles $arg"
+	    else
+	      dlprefiles="$dlprefiles $arg"
+	    fi
+	    prev=
+	    ;;
+	  esac
+	  ;;
+	expsyms)
+	  export_symbols="$arg"
+	  if test ! -f "$arg"; then
+	    $echo "$modename: symbol file \`$arg' does not exist"
+	    exit 1
+	  fi
+	  prev=
+	  continue
+	  ;;
+	expsyms_regex)
+	  export_symbols_regex="$arg"
+	  prev=
+	  continue
+	  ;;
+	release)
+	  release="-$arg"
+	  prev=
+	  continue
+	  ;;
+	rpath | xrpath)
+	  # We need an absolute path.
+	  case "$arg" in
+	  [\\/]* | [A-Za-z]:[\\/]*) ;;
+	  *)
+	    $echo "$modename: only absolute run-paths are allowed" 1>&2
+	    exit 1
+	    ;;
+	  esac
+	  if test "$prev" = rpath; then
+	    case "$rpath " in
+	    *" $arg "*) ;;
+	    *) rpath="$rpath $arg" ;;
+	    esac
+	  else
+	    case "$xrpath " in
+	    *" $arg "*) ;;
+	    *) xrpath="$xrpath $arg" ;;
+	    esac
+	  fi
+	  prev=
+	  continue
+	  ;;
+	*)
+	  eval "$prev=\"\$arg\""
+	  prev=
+	  continue
+	  ;;
+	esac
+      fi
+
+      prevarg="$arg"
+
+      case "$arg" in
+      -all-static)
+	if test -n "$link_static_flag"; then
+	  compile_command="$compile_command $link_static_flag"
+	  finalize_command="$finalize_command $link_static_flag"
+	fi
+	continue
+	;;
+
+      -allow-undefined)
+	# FIXME: remove this flag sometime in the future.
+	$echo "$modename: \`-allow-undefined' is deprecated because it is the default" 1>&2
+	continue
+	;;
+
+      -avoid-version)
+	avoid_version=yes
+	continue
+	;;
+
+      -dlopen)
+	prev=dlfiles
+	continue
+	;;
+
+      -dlpreopen)
+	prev=dlprefiles
+	continue
+	;;
+
+      -export-dynamic)
+	export_dynamic=yes
+	continue
+	;;
+
+      -export-symbols | -export-symbols-regex)
+	if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
+	  $echo "$modename: not more than one -exported-symbols argument allowed"
+	  exit 1
+	fi
+	if test "X$arg" = "X-export-symbols"; then
+	  prev=expsyms
+	else
+	  prev=expsyms_regex
+	fi
+	continue
+	;;
+
+      -L*)
+	dir=`$echo "X$arg" | $Xsed -e 's/^-L//'`
+	# We need an absolute path.
+	case "$dir" in
+	[\\/]* | [A-Za-z]:[\\/]*) ;;
+	*)
+	  absdir=`cd "$dir" && pwd`
+	  if test -z "$absdir"; then
+	    $echo "$modename: warning: cannot determine absolute directory name of \`$dir'" 1>&2
+	    $echo "$modename: passing it literally to the linker, although it might fail" 1>&2
+	    absdir="$dir"
+	  fi
+	  dir="$absdir"
+	  ;;
+	esac
+	case " $deplibs " in
+	*" $arg "*) ;;
+	*) deplibs="$deplibs $arg";;
+	esac
+	case " $lib_search_path " in
+	*" $dir "*) ;;
+	*) lib_search_path="$lib_search_path $dir";;
+	esac
+	case "$host" in
+	*-*-cygwin* | *-*-mingw* | *-*-os2*)
+	  dllsearchdir=`cd "$dir" && pwd || echo "$dir"`
+	  case ":$dllsearchpath:" in
+	  ::) dllsearchpath="$dllsearchdir";;
+	  *":$dllsearchdir:"*) ;;
+	  *) dllsearchpath="$dllsearchpath:$dllsearchdir";;
+	  esac
+	  ;;
+	esac
+	;;
+
+      -l*)
+	if test "$arg" = "-lc"; then
+	  case "$host" in
+	  *-*-cygwin* | *-*-mingw* | *-*-os2* | *-*-beos*)
+	    # These systems don't actually have c library (as such)
+	    continue
+	    ;;
+	  esac
+	elif test "$arg" = "-lm"; then
+	  case "$host" in
+	  *-*-cygwin* | *-*-beos*)
+	    # These systems don't actually have math library (as such)
+	    continue
+	    ;;
+	  esac
+	fi
+	deplibs="$deplibs $arg"
+	;;
+
+      -module)
+	module=yes
+	continue
+	;;
+
+      -no-undefined)
+	allow_undefined=no
+	continue
+	;;
+
+      -o) prev=output ;;
+
+      -release)
+	prev=release
+	continue
+	;;
+
+      -rpath)
+	prev=rpath
+	continue
+	;;
+
+      -R)
+	prev=xrpath
+	continue
+	;;
+
+      -R*)
+	dir=`$echo "X$arg" | $Xsed -e 's/^-R//'`
+	# We need an absolute path.
+	case "$dir" in
+	[\\/]* | [A-Za-z]:[\\/]*) ;;
+	*)
+	  $echo "$modename: only absolute run-paths are allowed" 1>&2
+	  exit 1
+	  ;;
+	esac
+	case "$xrpath " in
+	*" $dir "*) ;;
+	*) xrpath="$xrpath $dir" ;;
+	esac
+	continue
+	;;
+
+      -static)
+	# If we have no pic_flag, then this is the same as -all-static.
+	if test -z "$pic_flag" && test -n "$link_static_flag"; then
+	  compile_command="$compile_command $link_static_flag"
+	  finalize_command="$finalize_command $link_static_flag"
+	fi
+	continue
+	;;
+
+      -thread-safe)
+	thread_safe=yes
+	continue
+	;;
+
+      -version-info)
+	prev=vinfo
+	continue
+	;;
+
+      # Some other compiler flag.
+      -* | +*)
+	# Unknown arguments in both finalize_command and compile_command need
+	# to be aesthetically quoted because they are evaled later.
+	arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
+	case "$arg" in
+	*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*)
+	  arg="\"$arg\""
+	  ;;
+	esac
+	;;
+
+      *.o | *.obj | *.a | *.lib)
+	# A standard object.
+	objs="$objs $arg"
+	;;
+
+      *.lo)
+	# A library object.
+	if test "$prev" = dlfiles; then
+	  dlfiles="$dlfiles $arg"
+	  if test "$build_libtool_libs" = yes && test "$dlopen" = yes; then
+	    prev=
+	    continue
+	  else
+	    # If libtool objects are unsupported, then we need to preload.
+	    prev=dlprefiles
+	  fi
+	fi
+
+	if test "$prev" = dlprefiles; then
+	  # Preload the old-style object.
+	  dlprefiles="$dlprefiles "`$echo "X$arg" | $Xsed -e "$lo2o"`
+	  prev=
+	fi
+	libobjs="$libobjs $arg"
+	;;
+
+      *.la)
+	# A libtool-controlled library.
+
+	dlname=
+	libdir=
+	library_names=
+	old_library=
+
+	# Check to see that this really is a libtool archive.
+	if (sed -e '2q' $arg | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
+	else
+	  $echo "$modename: \`$arg' is not a valid libtool archive" 1>&2
+	  exit 1
+	fi
+
+	# If the library was installed with an old release of libtool,
+	# it will not redefine variable installed.
+	installed=yes
+
+	# Read the .la file
+	# If there is no directory component, then add one.
+	case "$arg" in
+	*/* | *\\*) . $arg ;;
+	*) . ./$arg ;;
+	esac
+
+	# Get the name of the library we link against.
+	linklib=
+	for l in $old_library $library_names; do
+	  linklib="$l"
+	done
+
+	if test -z "$linklib"; then
+	  $echo "$modename: cannot find name of link library for \`$arg'" 1>&2
+	  exit 1
+	fi
+
+	# Find the relevant object directory and library name.
+	name=`$echo "X$arg" | $Xsed -e 's%^.*/%%' -e 's/\.la$//' -e 's/^lib//'`
+
+	if test "X$installed" = Xyes; then
+	  dir="$libdir"
+	else
+	  dir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
+	  if test "X$dir" = "X$arg"; then
+	    dir="$objdir"
+	  else
+	    dir="$dir/$objdir"
+	  fi
+	fi
+
+	if test -n "$dependency_libs"; then
+	  # Extract -R and -L from dependency_libs
+	  temp_deplibs=
+	  for deplib in $dependency_libs; do
+	    case "$deplib" in
+	    -R*) temp_xrpath=`$echo "X$deplib" | $Xsed -e 's/^-R//'`
+		 case " $rpath $xrpath " in
+		 *" $temp_xrpath "*) ;;
+		 *) xrpath="$xrpath $temp_xrpath";;
+		 esac;;
+	    -L*) case "$compile_command $temp_deplibs " in
+		 *" $deplib "*) ;;
+		 *) temp_deplibs="$temp_deplibs $deplib";;
+		 esac
+		 temp_dir=`$echo "X$deplib" | $Xsed -e 's/^-L//'`
+		 case " $lib_search_path " in
+		 *" $temp_dir "*) ;;
+		 *) lib_search_path="$lib_search_path $temp_dir";;
+		 esac
+		 ;;
+	    *) temp_deplibs="$temp_deplibs $deplib";;
+	    esac
+	  done
+	  dependency_libs="$temp_deplibs"
+	fi
+
+	if test -z "$libdir"; then
+	  # It is a libtool convenience library, so add in its objects.
+	  convenience="$convenience $dir/$old_library"
+	  old_convenience="$old_convenience $dir/$old_library"
+	  deplibs="$deplibs$dependency_libs"
+	  compile_command="$compile_command $dir/$old_library$dependency_libs"
+	  finalize_command="$finalize_command $dir/$old_library$dependency_libs"
+	  continue
+	fi
+
+	# This library was specified with -dlopen.
+	if test "$prev" = dlfiles; then
+	  dlfiles="$dlfiles $arg"
+	  if test -z "$dlname" || test "$dlopen" != yes || test "$build_libtool_libs" = no; then
+	    # If there is no dlname, no dlopen support or we're linking statically,
+	    # we need to preload.
+	    prev=dlprefiles
+	  else
+	    # We should not create a dependency on this library, but we
+	    # may need any libraries it requires.
+	    compile_command="$compile_command$dependency_libs"
+	    finalize_command="$finalize_command$dependency_libs"
+	    prev=
+	    continue
+	  fi
+	fi
+
+	# The library was specified with -dlpreopen.
+	if test "$prev" = dlprefiles; then
+	  # Prefer using a static library (so that no silly _DYNAMIC symbols
+	  # are required to link).
+	  if test -n "$old_library"; then
+	    dlprefiles="$dlprefiles $dir/$old_library"
+	  else
+	    dlprefiles="$dlprefiles $dir/$linklib"
+	  fi
+	  prev=
+	fi
+
+	if test -n "$library_names" &&
+	   { test "$prefer_static_libs" = no || test -z "$old_library"; }; then
+	  link_against_libtool_libs="$link_against_libtool_libs $arg"
+	  if test -n "$shlibpath_var"; then
+	    # Make sure the rpath contains only unique directories.
+	    case "$temp_rpath " in
+	    *" $dir "*) ;;
+	    *) temp_rpath="$temp_rpath $dir" ;;
+	    esac
+	  fi
+
+	  # We need an absolute path.
+	  case "$dir" in
+	  [\\/] | [A-Za-z]:[\\/]*) absdir="$dir" ;;
+	  *)
+	    absdir=`cd "$dir" && pwd`
+	    if test -z "$absdir"; then
+	      $echo "$modename: warning: cannot determine absolute directory name of \`$dir'" 1>&2
+	      $echo "$modename: passing it literally to the linker, although it might fail" 1>&2
+	      absdir="$dir"
+	    fi
+	    ;;
+	  esac
+	  
+	  # This is the magic to use -rpath.
+	  # Skip directories that are in the system default run-time
+	  # search path, unless they have been requested with -R.
+	  case " $sys_lib_dlsearch_path " in
+	  *" $absdir "*) ;;
+	  *)
+	    case "$compile_rpath " in
+	    *" $absdir "*) ;;
+	    *) compile_rpath="$compile_rpath $absdir" 
+	    esac
+	    ;;
+	  esac
+
+	  case " $sys_lib_dlsearch_path " in
+	  *" $libdir "*) ;;
+	  *)
+	    case "$finalize_rpath " in
+	    *" $libdir "*) ;;
+	    *) finalize_rpath="$finalize_rpath $libdir"
+	    esac
+	    ;;
+	  esac
+
+	  lib_linked=yes
+	  case "$hardcode_action" in
+	  immediate | unsupported)
+	    if test "$hardcode_direct" = no; then
+	      compile_command="$compile_command $dir/$linklib"
+	      deplibs="$deplibs $dir/$linklib"
+	      case "$host" in
+	      *-*-cygwin* | *-*-mingw* | *-*-os2*)
+		dllsearchdir=`cd "$dir" && pwd || echo "$dir"`
+		if test -n "$dllsearchpath"; then
+		  dllsearchpath="$dllsearchpath:$dllsearchdir"
+		else
+		  dllsearchpath="$dllsearchdir"
+		fi
+		;;
+	      esac
+	    elif test "$hardcode_minus_L" = no; then
+	      case "$host" in
+	      *-*-sunos*)
+		compile_shlibpath="$compile_shlibpath$dir:"
+		;;
+	      esac
+	      case "$compile_command " in
+	      *" -L$dir "*) ;;
+	      *) compile_command="$compile_command -L$dir";;
+	      esac
+	      compile_command="$compile_command -l$name"
+	      deplibs="$deplibs -L$dir -l$name"
+	    elif test "$hardcode_shlibpath_var" = no; then
+	      case ":$compile_shlibpath:" in
+	      *":$dir:"*) ;;
+	      *) compile_shlibpath="$compile_shlibpath$dir:";;
+	      esac
+	      compile_command="$compile_command -l$name"
+	      deplibs="$deplibs -l$name"
+	    else
+	      lib_linked=no
+	    fi
+	    ;;
+
+	  relink)
+	    if test "$hardcode_direct" = yes; then
+	      compile_command="$compile_command $absdir/$linklib"
+	      deplibs="$deplibs $absdir/$linklib"
+	    elif test "$hardcode_minus_L" = yes; then
+	      case "$compile_command " in
+	      *" -L$absdir "*) ;;
+	      *) compile_command="$compile_command -L$absdir";;
+	      esac
+	      compile_command="$compile_command -l$name"
+	      deplibs="$deplibs -L$absdir -l$name"
+	    elif test "$hardcode_shlibpath_var" = yes; then
+	      case ":$compile_shlibpath:" in
+	      *":$absdir:"*) ;;
+	      *) compile_shlibpath="$compile_shlibpath$absdir:";;
+	      esac
+	      compile_command="$compile_command -l$name"
+	      deplibs="$deplibs -l$name"
+	    else
+	      lib_linked=no
+	    fi
+	    ;;
+
+	  *)
+	    lib_linked=no
+	    ;;
+	  esac
+
+	  if test "$lib_linked" != yes; then
+	    $echo "$modename: configuration error: unsupported hardcode properties"
+	    exit 1
+	  fi
+
+	  # Finalize command for both is simple: just hardcode it.
+	  if test "$hardcode_direct" = yes; then
+	    finalize_command="$finalize_command $libdir/$linklib"
+	  elif test "$hardcode_minus_L" = yes; then
+	    case "$finalize_command " in
+	    *" -L$libdir "*) ;;
+	    *) finalize_command="$finalize_command -L$libdir";;
+	    esac
+	    finalize_command="$finalize_command -l$name"
+	  elif test "$hardcode_shlibpath_var" = yes; then
+	    case ":$finalize_shlibpath:" in
+	    *":$libdir:"*) ;;
+	    *) finalize_shlibpath="$finalize_shlibpath$libdir:";;
+	    esac
+	    finalize_command="$finalize_command -l$name"
+	  else
+	    # We cannot seem to hardcode it, guess we'll fake it.
+	    case "$finalize_command " in
+	    *" -L$dir "*) ;;
+	    *) finalize_command="$finalize_command -L$libdir";;
+	    esac
+	    finalize_command="$finalize_command -l$name"
+	  fi
+	else
+	  # Transform directly to old archives if we don't build new libraries.
+	  if test -n "$pic_flag" && test -z "$old_library"; then
+	    $echo "$modename: cannot find static library for \`$arg'" 1>&2
+	    exit 1
+	  fi
+
+	  # Here we assume that one of hardcode_direct or hardcode_minus_L
+	  # is not unsupported.  This is valid on all known static and
+	  # shared platforms.
+	  if test "$hardcode_direct" != unsupported; then
+	    test -n "$old_library" && linklib="$old_library"
+	    compile_command="$compile_command $dir/$linklib"
+	    finalize_command="$finalize_command $dir/$linklib"
+	  else
+	    case "$compile_command " in
+	    *" -L$dir "*) ;;
+	    *) compile_command="$compile_command -L$dir";;
+	    esac
+	    compile_command="$compile_command -l$name"
+	    case "$finalize_command " in
+	    *" -L$dir "*) ;;
+	    *) finalize_command="$finalize_command -L$dir";;
+	    esac
+	    finalize_command="$finalize_command -l$name"
+	  fi
+	fi
+
+	# Add in any libraries that this one depends upon.
+	compile_command="$compile_command$dependency_libs"
+	finalize_command="$finalize_command$dependency_libs"
+	continue
+	;;
+
+      # Some other compiler argument.
+      *)
+	# Unknown arguments in both finalize_command and compile_command need
+	# to be aesthetically quoted because they are evaled later.
+	arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
+	case "$arg" in
+	*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*)
+	  arg="\"$arg\""
+	  ;;
+	esac
+	;;
+      esac
+
+      # Now actually substitute the argument into the commands.
+      if test -n "$arg"; then
+	compile_command="$compile_command $arg"
+	finalize_command="$finalize_command $arg"
+      fi
+    done
+
+    if test -n "$prev"; then
+      $echo "$modename: the \`$prevarg' option requires an argument" 1>&2
+      $echo "$help" 1>&2
+      exit 1
+    fi
+
+    if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then
+      eval arg=\"$export_dynamic_flag_spec\"
+      compile_command="$compile_command $arg"
+      finalize_command="$finalize_command $arg"
+    fi
+
+    oldlibs=
+    # calculate the name of the file, without its directory
+    outputname=`$echo "X$output" | $Xsed -e 's%^.*/%%'`
+    libobjs_save="$libobjs"
+
+    case "$output" in
+    "")
+      $echo "$modename: you must specify an output file" 1>&2
+      $echo "$help" 1>&2
+      exit 1
+      ;;
+
+    *.a | *.lib)
+      if test -n "$link_against_libtool_libs"; then
+	$echo "$modename: error: cannot link libtool libraries into archives" 1>&2
+	exit 1
+      fi
+
+      if test -n "$deplibs"; then
+	$echo "$modename: warning: \`-l' and \`-L' are ignored for archives" 1>&2
+      fi
+
+      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+	$echo "$modename: warning: \`-dlopen' is ignored for archives" 1>&2
+      fi
+
+      if test -n "$rpath"; then
+	$echo "$modename: warning: \`-rpath' is ignored for archives" 1>&2
+      fi
+
+      if test -n "$xrpath"; then
+	$echo "$modename: warning: \`-R' is ignored for archives" 1>&2
+      fi
+
+      if test -n "$vinfo"; then
+	$echo "$modename: warning: \`-version-info' is ignored for archives" 1>&2
+      fi
+
+      if test -n "$release"; then
+	$echo "$modename: warning: \`-release' is ignored for archives" 1>&2
+      fi
+
+      if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
+	$echo "$modename: warning: \`-export-symbols' is ignored for archives" 1>&2
+      fi
+
+      # Now set the variables for building old libraries.
+      build_libtool_libs=no
+      oldlibs="$output"
+      ;;
+
+    *.la)
+      # Make sure we only generate libraries of the form `libNAME.la'.
+      case "$outputname" in
+      lib*)
+	name=`$echo "X$outputname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
+	eval libname=\"$libname_spec\"
+	;;
+      *)
+	if test "$module" = no; then
+	  $echo "$modename: libtool library \`$output' must begin with \`lib'" 1>&2
+	  $echo "$help" 1>&2
+	  exit 1
+	fi
+	if test "$need_lib_prefix" != no; then
+	  # Add the "lib" prefix for modules if required
+	  name=`$echo "X$outputname" | $Xsed -e 's/\.la$//'`
+	  eval libname=\"$libname_spec\"
+	else
+	  libname=`$echo "X$outputname" | $Xsed -e 's/\.la$//'`
+	fi
+	;;
+      esac
+
+      output_objdir=`$echo "X$output" | $Xsed -e 's%/[^/]*$%%'`
+      if test "X$output_objdir" = "X$output"; then
+	output_objdir="$objdir"
+      else
+	output_objdir="$output_objdir/$objdir"
+      fi
+
+      if test -n "$objs"; then
+	$echo "$modename: cannot build libtool library \`$output' from non-libtool objects:$objs" 2>&1
+	exit 1
+      fi
+
+      # How the heck are we supposed to write a wrapper for a shared library?
+      if test -n "$link_against_libtool_libs"; then
+	 $echo "$modename: error: cannot link shared libraries into libtool libraries" 1>&2
+	 exit 1
+      fi
+
+      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+	$echo "$modename: warning: \`-dlopen' is ignored for libtool libraries" 1>&2
+      fi
+
+      set dummy $rpath
+      if test $# -gt 2; then
+	$echo "$modename: warning: ignoring multiple \`-rpath's for a libtool library" 1>&2
+      fi
+      install_libdir="$2"
+
+      oldlibs=
+      if test -z "$rpath"; then
+	if test "$build_libtool_libs" = yes; then
+	  # Building a libtool convenience library.
+	  libext=al
+	  oldlibs="$output_objdir/$libname.$libext $oldlibs"
+	  build_libtool_libs=convenience
+	  build_old_libs=yes
+	fi
+	dependency_libs="$deplibs"
+
+	if test -n "$vinfo"; then
+	  $echo "$modename: warning: \`-version-info' is ignored for convenience libraries" 1>&2
+	fi
+
+	if test -n "$release"; then
+	  $echo "$modename: warning: \`-release' is ignored for convenience libraries" 1>&2
+	fi
+      else
+
+	# Parse the version information argument.
+	IFS="${IFS= 	}"; save_ifs="$IFS"; IFS=':'
+	set dummy $vinfo 0 0 0
+	IFS="$save_ifs"
+
+	if test -n "$8"; then
+	  $echo "$modename: too many parameters to \`-version-info'" 1>&2
+	  $echo "$help" 1>&2
+	  exit 1
+	fi
+
+	current="$2"
+	revision="$3"
+	age="$4"
+
+	# Check that each of the things are valid numbers.
+	case "$current" in
+	0 | [1-9] | [1-9][0-9]*) ;;
+	*)
+	  $echo "$modename: CURRENT \`$current' is not a nonnegative integer" 1>&2
+	  $echo "$modename: \`$vinfo' is not valid version information" 1>&2
+	  exit 1
+	  ;;
+	esac
+
+	case "$revision" in
+	0 | [1-9] | [1-9][0-9]*) ;;
+	*)
+	  $echo "$modename: REVISION \`$revision' is not a nonnegative integer" 1>&2
+	  $echo "$modename: \`$vinfo' is not valid version information" 1>&2
+	  exit 1
+	  ;;
+	esac
+
+	case "$age" in
+	0 | [1-9] | [1-9][0-9]*) ;;
+	*)
+	  $echo "$modename: AGE \`$age' is not a nonnegative integer" 1>&2
+	  $echo "$modename: \`$vinfo' is not valid version information" 1>&2
+	  exit 1
+	  ;;
+	esac
+
+	if test $age -gt $current; then
+	  $echo "$modename: AGE \`$age' is greater than the current interface number \`$current'" 1>&2
+	  $echo "$modename: \`$vinfo' is not valid version information" 1>&2
+	  exit 1
+	fi
+
+	# Calculate the version variables.
+	major=
+	versuffix=
+	verstring=
+	case "$version_type" in
+	none) ;;
+
+	irix)
+	  major=`expr $current - $age + 1`
+	  versuffix="$major.$revision"
+	  verstring="sgi$major.$revision"
+
+	  # Add in all the interfaces that we are compatible with.
+	  loop=$revision
+	  while test $loop != 0; do
+	    iface=`expr $revision - $loop`
+	    loop=`expr $loop - 1`
+	    verstring="sgi$major.$iface:$verstring"
+	  done
+	  ;;
+
+	linux)
+	  major=.`expr $current - $age`
+	  versuffix="$major.$age.$revision"
+	  ;;
+
+	osf)
+	  major=`expr $current - $age`
+	  versuffix=".$current.$age.$revision"
+	  verstring="$current.$age.$revision"
+
+	  # Add in all the interfaces that we are compatible with.
+	  loop=$age
+	  while test $loop != 0; do
+	    iface=`expr $current - $loop`
+	    loop=`expr $loop - 1`
+	    verstring="$verstring:${iface}.0"
+	  done
+
+	  # Make executables depend on our current version.
+	  verstring="$verstring:${current}.0"
+	  ;;
+
+	sunos)
+	  major=".$current"
+	  versuffix=".$current.$revision"
+	  ;;
+
+	freebsd-aout)
+	  major=".$current"
+	  versuffix=".$current.$revision";
+	  ;;
+
+	freebsd-elf)
+	  major=".$current"
+	  versuffix=".$current";
+	  ;;
+
+	windows)
+	  # Like Linux, but with '-' rather than '.', since we only
+	  # want one extension on Windows 95.
+	  major=`expr $current - $age`
+	  versuffix="-$major-$age-$revision"
+	  ;;
+
+	*)
+	  $echo "$modename: unknown library version type \`$version_type'" 1>&2
+	  echo "Fatal configuration error.  See the $PACKAGE docs for more information." 1>&2
+	  exit 1
+	  ;;
+	esac
+
+	# Clear the version info if we defaulted, and they specified a release.
+	if test -z "$vinfo" && test -n "$release"; then
+	  major=
+	  verstring="0.0"
+	  if test "$need_version" = no; then
+	    versuffix=
+	  else
+	    versuffix=".0.0"
+	  fi
+	fi
+
+	# Remove version info from name if versioning should be avoided
+	if test "$avoid_version" = yes && test "$need_version" = no; then
+	  major=
+	  versuffix=
+	  verstring=""
+	fi
+	
+	# Check to see if the archive will have undefined symbols.
+	if test "$allow_undefined" = yes; then
+	  if test "$allow_undefined_flag" = unsupported; then
+	    $echo "$modename: warning: undefined symbols not allowed in $host shared libraries" 1>&2
+	    build_libtool_libs=no
+	    build_old_libs=yes
+	  fi
+	else
+	  # Don't allow undefined symbols.
+	  allow_undefined_flag="$no_undefined_flag"
+	fi
+
+	dependency_libs="$deplibs"
+	case "$host" in
+	*-*-cygwin* | *-*-mingw* | *-*-os2* | *-*-beos*)
+	  # these systems don't actually have a c library (as such)!
+	  ;;
+	*)
+	  # Add libc to deplibs on all other systems.
+	  deplibs="$deplibs -lc"
+	  ;;
+	esac
+      fi
+
+      # Create the output directory, or remove our outputs if we need to.
+      if test -d $output_objdir; then
+	$show "${rm}r $output_objdir/$outputname $output_objdir/$libname.* $output_objdir/${libname}${release}.*"
+	$run ${rm}r $output_objdir/$outputname $output_objdir/$libname.* $output_objdir/${libname}${release}.*
+      else
+	$show "$mkdir $output_objdir"
+	$run $mkdir $output_objdir
+	status=$?
+	if test $status -ne 0 && test ! -d $output_objdir; then
+	  exit $status
+	fi
+      fi
+
+      # Now set the variables for building old libraries.
+      if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then
+	oldlibs="$oldlibs $output_objdir/$libname.$libext"
+
+	# Transform .lo files to .o files.
+	oldobjs="$objs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP`
+      fi
+
+      if test "$build_libtool_libs" = yes; then
+	# Transform deplibs into only deplibs that can be linked in shared.
+	name_save=$name
+	libname_save=$libname
+	release_save=$release
+	versuffix_save=$versuffix
+	major_save=$major
+	# I'm not sure if I'm treating the release correctly.  I think
+	# release should show up in the -l (ie -lgmp5) so we don't want to
+	# add it in twice.  Is that correct?
+	release=""
+	versuffix=""
+	major=""
+	newdeplibs=
+	droppeddeps=no
+	case "$deplibs_check_method" in
+	pass_all)
+	  # Don't check for shared/static.  Everything works.
+	  # This might be a little naive.  We might want to check
+	  # whether the library exists or not.  But this is on
+	  # osf3 & osf4 and I'm not really sure... Just
+	  # implementing what was already the behaviour.
+	  newdeplibs=$deplibs
+	  ;;
+	test_compile)
+	  # This code stresses the "libraries are programs" paradigm to its
+	  # limits. Maybe even breaks it.  We compile a program, linking it
+	  # against the deplibs as a proxy for the library.  Then we can check
+	  # whether they linked in statically or dynamically with ldd.
+	  $rm conftest.c
+	  cat > conftest.c <<EOF
+	  int main() { return 0; }
+EOF
+	  $rm conftest
+	  $C_compiler -o conftest conftest.c $deplibs
+	  if test $? -eq 0 ; then
+	    ldd_output=`ldd conftest`
+	    for i in $deplibs; do
+	      name="`expr $i : '-l\(.*\)'`"
+	      # If $name is empty we are operating on a -L argument.
+	      if test "$name" != "" ; then
+		libname=`eval \\$echo \"$libname_spec\"`
+		deplib_matches=`eval \\$echo \"$library_names_spec\"`
+		set dummy $deplib_matches
+		deplib_match=$2
+		if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
+		  newdeplibs="$newdeplibs $i"
+		else
+		  droppeddeps=yes
+		  echo
+		  echo "*** Warning: This library needs some functionality provided by $i."
+		  echo "*** I have the capability to make that library automatically link in when"
+		  echo "*** you link to this library.  But I can only do this if you have a"
+		  echo "*** shared version of the library, which you do not appear to have."
+		fi
+	      else
+		newdeplibs="$newdeplibs $i"
+	      fi
+	    done
+	  else
+	    # Error occured in the first compile.  Let's try to salvage the situation:
+	    # Compile a seperate program for each library.
+	    for i in $deplibs; do
+	      name="`expr $i : '-l\(.*\)'`"
+	     # If $name is empty we are operating on a -L argument.
+	      if test "$name" != "" ; then
+		$rm conftest
+		$C_compiler -o conftest conftest.c $i
+		# Did it work?
+		if test $? -eq 0 ; then
+		  ldd_output=`ldd conftest`
+		  libname=`eval \\$echo \"$libname_spec\"`
+		  deplib_matches=`eval \\$echo \"$library_names_spec\"`
+		  set dummy $deplib_matches
+		  deplib_match=$2
+		  if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
+		    newdeplibs="$newdeplibs $i"
+		  else
+		    droppeddeps=yes
+		    echo
+		    echo "*** Warning: This library needs some functionality provided by $i."
+		    echo "*** I have the capability to make that library automatically link in when"
+		    echo "*** you link to this library.  But I can only do this if you have a"
+		    echo "*** shared version of the library, which you do not appear to have."
+		  fi
+		else
+		  droppeddeps=yes
+		  echo
+		  echo "*** Warning!  Library $i is needed by this library but I was not able to"
+		  echo "***  make it link in!  You will probably need to install it or some"
+		  echo "*** library that it depends on before this library will be fully"
+		  echo "*** functional.  Installing it before continuing would be even better."
+		fi
+	      else
+		newdeplibs="$newdeplibs $i"
+	      fi
+	    done
+	  fi
+	  ;;
+	file_magic*)
+	  set dummy $deplibs_check_method
+	  file_magic_regex="`expr \"$deplibs_check_method\" : \"$2 \(.*\)\"`"
+	  for a_deplib in $deplibs; do
+	    name="`expr $a_deplib : '-l\(.*\)'`"
+	    # If $name is empty we are operating on a -L argument.
+	    if test "$name" != "" ; then
+	      libname=`eval \\$echo \"$libname_spec\"`
+	      for i in $lib_search_path; do
+		    potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
+		    for potent_lib in $potential_libs; do
+		      # Follow soft links.
+		      if ls -lLd "$potent_lib" 2>/dev/null \
+			 | grep " -> " >/dev/null; then
+			continue 
+		      fi
+		      # The statement above tries to avoid entering an
+		      # endless loop below, in case of cyclic links.
+		      # We might still enter an endless loop, since a link
+		      # loop can be closed while we follow links,
+		      # but so what?
+		      potlib="$potent_lib"
+		      while test -h "$potlib" 2>/dev/null; do
+			potliblink=`ls -ld $potlib | sed 's/.* -> //'`
+			case "$potliblink" in
+			[\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";;
+			*) potlib=`$echo "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";;
+			esac
+		      done
+		      if eval $file_magic_cmd \"\$potlib\" 2>/dev/null \
+			 | sed 10q \
+			 | egrep "$file_magic_regex" > /dev/null; then
+			newdeplibs="$newdeplibs $a_deplib"
+			a_deplib=""
+			break 2
+		      fi
+		    done
+	      done
+	      if test -n "$a_deplib" ; then
+		droppeddeps=yes
+		echo
+		echo "*** Warning: This library needs some functionality provided by $a_deplib."
+		echo "*** I have the capability to make that library automatically link in when"
+		echo "*** you link to this library.  But I can only do this if you have a"
+		echo "*** shared version of the library, which you do not appear to have."
+	      fi
+	    else
+	      # Add a -L argument.
+	      newdeplibs="$newdeplibs $a_deplib"
+	    fi
+	  done # Gone through all deplibs.
+	  ;;
+	none | unknown | *)
+	  newdeplibs=""
+	  if $echo "X $deplibs" | $Xsed -e 's/ -lc$//' \
+	       -e 's/ -[LR][^ ]*//g' -e 's/[ 	]//g' |
+	     grep . >/dev/null; then
+	    echo
+	    if test "X$deplibs_check_method" = "Xnone"; then
+	      echo "*** Warning: inter-library dependencies are not supported in this platform."
+	    else
+	      echo "*** Warning: inter-library dependencies are not known to be supported."
+	    fi
+	    echo "*** All declared inter-library dependencies are being dropped."
+	    droppeddeps=yes
+	  fi
+	  ;;
+	esac
+	versuffix=$versuffix_save
+	major=$major_save
+	release=$release_save
+	libname=$libname_save
+	name=$name_save
+
+	if test "$droppeddeps" = yes; then
+	  if test "$module" = yes; then
+	    echo
+	    echo "*** Warning: libtool could not satisfy all declared inter-library"
+	    echo "*** dependencies of module $libname.  Therefore, libtool will create"
+	    echo "*** a static module, that should work as long as the dlopening"
+	    echo "*** application is linked with the -dlopen flag."
+	    if test -z "$global_symbol_pipe"; then
+	      echo
+	      echo "*** However, this would only work if libtool was able to extract symbol"
+	      echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
+	      echo "*** not find such a program.  So, this module is probably useless."
+	      echo "*** \`nm' from GNU binutils and a full rebuild may help."
+	    fi
+	    if test "$build_old_libs" = no; then
+	      oldlibs="$output_objdir/$libname.$libext"
+	      build_libtool_libs=module
+	      build_old_libs=yes
+	    else
+	      build_libtool_libs=no
+	    fi
+	  else
+	    echo "*** The inter-library dependencies that have been dropped here will be"
+	    echo "*** automatically added whenever a program is linked with this library"
+	    echo "*** or is declared to -dlopen it."
+	  fi
+	fi
+	# Done checking deplibs!
+	deplibs=$newdeplibs
+      fi
+
+      # All the library-specific variables (install_libdir is set above).
+      library_names=
+      old_library=
+      dlname=
+      
+      # Test again, we may have decided not to build it any more
+      if test "$build_libtool_libs" = yes; then
+	# Get the real and link names of the library.
+	eval library_names=\"$library_names_spec\"
+	set dummy $library_names
+	realname="$2"
+	shift; shift
+
+	if test -n "$soname_spec"; then
+	  eval soname=\"$soname_spec\"
+	else
+	  soname="$realname"
+	fi
+
+	lib="$output_objdir/$realname"
+	for link
+	do
+	  linknames="$linknames $link"
+	done
+
+	# Ensure that we have .o objects for linkers which dislike .lo
+	# (e.g. aix) incase we are running --disable-static
+	for obj in $libobjs; do
+	  oldobj=`$echo "X$obj" | $Xsed -e "$lo2o"`
+	  if test ! -f $oldobj; then
+	    $show "${LN_S} $obj $oldobj"
+	    $run ${LN_S} $obj $oldobj || exit $?
+	  fi
+	done
+
+	# Use standard objects if they are pic
+	test -z "$pic_flag" && libobjs=`$echo "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+
+	# Prepare the list of exported symbols
+	if test -z "$export_symbols"; then
+	  if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then
+	    $show "generating symbol list for \`$libname.la'"
+	    export_symbols="$output_objdir/$libname.exp"
+	    $run $rm $export_symbols
+	    eval cmds=\"$export_symbols_cmds\"
+	    IFS="${IFS= 	}"; save_ifs="$IFS"; IFS='~'
+	    for cmd in $cmds; do
+	      IFS="$save_ifs"
+	      $show "$cmd"
+	      $run eval "$cmd" || exit $?
+	    done
+	    IFS="$save_ifs"
+	    if test -n "$export_symbols_regex"; then
+	      $show "egrep -e \"$export_symbols_regex\" \"$export_symbols\" > \"${export_symbols}T\""
+	      $run eval 'egrep -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
+	      $show "$mv \"${export_symbols}T\" \"$export_symbols\""
+	      $run eval '$mv "${export_symbols}T" "$export_symbols"'
+	    fi
+	  fi
+	fi
+
+	if test -n "$export_symbols" && test -n "$include_expsyms"; then
+	  $run eval '$echo "X$include_expsyms" | $SP2NL >> "$export_symbols"'
+	fi
+
+	if test -n "$convenience"; then
+	  if test -n "$whole_archive_flag_spec"; then
+	    eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
+	  else
+	    gentop="$output_objdir/${outputname}x"
+	    $show "${rm}r $gentop"
+	    $run ${rm}r "$gentop"
+	    $show "mkdir $gentop"
+	    $run mkdir "$gentop"
+	    status=$?
+	    if test $status -ne 0 && test ! -d "$gentop"; then
+	      exit $status
+	    fi
+	    generated="$generated $gentop"
+
+	    for xlib in $convenience; do
+	      # Extract the objects.
+	      case "$xlib" in
+	      [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;;
+	      *) xabs=`pwd`"/$xlib" ;;
+	      esac
+	      xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'`
+	      xdir="$gentop/$xlib"
+
+	      $show "${rm}r $xdir"
+	      $run ${rm}r "$xdir"
+	      $show "mkdir $xdir"
+	      $run mkdir "$xdir"
+	      status=$?
+	      if test $status -ne 0 && test ! -d "$xdir"; then
+		exit $status
+	      fi
+	      $show "(cd $xdir && $AR x $xabs)"
+	      $run eval "(cd \$xdir && $AR x \$xabs)" || exit $?
+
+	      libobjs="$libobjs "`find $xdir -name \*.o -print -o -name \*.lo -print | $NL2SP`
+	    done
+	  fi
+	fi
+
+	if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
+	  eval flag=\"$thread_safe_flag_spec\"
+	  linkopts="$linkopts $flag"
+	fi
+
+	# Do each of the archive commands.
+	if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
+	  eval cmds=\"$archive_expsym_cmds\"
+	else
+	  eval cmds=\"$archive_cmds\"
+	fi
+	IFS="${IFS= 	}"; save_ifs="$IFS"; IFS='~'
+	for cmd in $cmds; do
+	  IFS="$save_ifs"
+	  $show "$cmd"
+	  $run eval "$cmd" || exit $?
+	done
+	IFS="$save_ifs"
+
+	# Create links to the real library.
+	for linkname in $linknames; do
+	  if test "$realname" != "$linkname"; then
+	    $show "(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)"
+	    $run eval '(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)' || exit $?
+	  fi
+	done
+
+	# If -module or -export-dynamic was specified, set the dlname.
+	if test "$module" = yes || test "$export_dynamic" = yes; then
+	  # On all known operating systems, these are identical.
+	  dlname="$soname"
+	fi
+      fi
+      ;;
+
+    *.lo | *.o | *.obj)
+      if test -n "$link_against_libtool_libs"; then
+	$echo "$modename: error: cannot link libtool libraries into objects" 1>&2
+	exit 1
+      fi
+
+      if test -n "$deplibs"; then
+	$echo "$modename: warning: \`-l' and \`-L' are ignored for objects" 1>&2
+      fi
+
+      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+	$echo "$modename: warning: \`-dlopen' is ignored for objects" 1>&2
+      fi
+
+      if test -n "$rpath"; then
+	$echo "$modename: warning: \`-rpath' is ignored for objects" 1>&2
+      fi
+
+      if test -n "$xrpath"; then
+	$echo "$modename: warning: \`-R' is ignored for objects" 1>&2
+      fi
+
+      if test -n "$vinfo"; then
+	$echo "$modename: warning: \`-version-info' is ignored for objects" 1>&2
+      fi
+
+      if test -n "$release"; then
+	$echo "$modename: warning: \`-release' is ignored for objects" 1>&2
+      fi
+
+      case "$output" in
+      *.lo)
+	if test -n "$objs"; then
+	  $echo "$modename: cannot build library object \`$output' from non-libtool objects" 1>&2
+	  exit 1
+	fi
+	libobj="$output"
+	obj=`$echo "X$output" | $Xsed -e "$lo2o"`
+	;;
+      *)
+	libobj=
+	obj="$output"
+	;;
+      esac
+
+      # Delete the old objects.
+      $run $rm $obj $libobj
+
+      # Objects from convenience libraries.  This assumes
+      # single-version convenience libraries.  Whenever we create
+      # different ones for PIC/non-PIC, this we'll have to duplicate
+      # the extraction.
+      reload_conv_objs=
+      gentop=
+      # reload_cmds runs $LD directly, so let us get rid of
+      # -Wl from whole_archive_flag_spec
+      wl= 
+
+      if test -n "$convenience"; then
+	if test -n "$whole_archive_flag_spec"; then
+	  eval reload_conv_objs=\"\$reload_objs $whole_archive_flag_spec\"
+	else
+	  gentop="$output_objdir/${obj}x"
+	  $show "${rm}r $gentop"
+	  $run ${rm}r "$gentop"
+	  $show "mkdir $gentop"
+	  $run mkdir "$gentop"
+	  status=$?
+	  if test $status -ne 0 && test ! -d "$gentop"; then
+	    exit $status
+	  fi
+	  generated="$generated $gentop"
+
+	  for xlib in $convenience; do
+	    # Extract the objects.
+	    case "$xlib" in
+	    [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;;
+	    *) xabs=`pwd`"/$xlib" ;;
+	    esac
+	    xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'`
+	    xdir="$gentop/$xlib"
+
+	    $show "${rm}r $xdir"
+	    $run ${rm}r "$xdir"
+	    $show "mkdir $xdir"
+	    $run mkdir "$xdir"
+	    status=$?
+	    if test $status -ne 0 && test ! -d "$xdir"; then
+	      exit $status
+	    fi
+	    $show "(cd $xdir && $AR x $xabs)"
+	    $run eval "(cd \$xdir && $AR x \$xabs)" || exit $?
+
+	    reload_conv_objs="$reload_objs "`find $xdir -name \*.o -print -o -name \*.lo -print | $NL2SP`
+	  done
+	fi
+      fi
+
+      # Create the old-style object.
+      reload_objs="$objs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs"
+
+      output="$obj"
+      eval cmds=\"$reload_cmds\"
+      IFS="${IFS= 	}"; save_ifs="$IFS"; IFS='~'
+      for cmd in $cmds; do
+	IFS="$save_ifs"
+	$show "$cmd"
+	$run eval "$cmd" || exit $?
+      done
+      IFS="$save_ifs"
+
+      # Exit if we aren't doing a library object file.
+      if test -z "$libobj"; then
+	if test -n "$gentop"; then
+	  $show "${rm}r $gentop"
+	  $run ${rm}r $gentop
+	fi
+
+	exit 0
+      fi
+
+      if test "$build_libtool_libs" != yes; then
+	if test -n "$gentop"; then
+	  $show "${rm}r $gentop"
+	  $run ${rm}r $gentop
+	fi
+
+	# Create an invalid libtool object if no PIC, so that we don't
+	# accidentally link it into a program.
+	$show "echo timestamp > $libobj"
+	$run eval "echo timestamp > $libobj" || exit $?
+	exit 0
+      fi
+
+      if test -n "$pic_flag"; then
+	# Only do commands if we really have different PIC objects.
+	reload_objs="$libobjs $reload_conv_objs"
+	output="$libobj"
+	eval cmds=\"$reload_cmds\"
+	IFS="${IFS= 	}"; save_ifs="$IFS"; IFS='~'
+	for cmd in $cmds; do
+	  IFS="$save_ifs"
+	  $show "$cmd"
+	  $run eval "$cmd" || exit $?
+	done
+	IFS="$save_ifs"
+      else
+	# Just create a symlink.
+	$show $rm $libobj
+	$run $rm $libobj
+	$show "$LN_S $obj $libobj"
+	$run $LN_S $obj $libobj || exit $?
+      fi
+
+      if test -n "$gentop"; then
+	$show "${rm}r $gentop"
+	$run ${rm}r $gentop
+      fi
+
+      exit 0
+      ;;
+
+    # Anything else should be a program.
+    *)
+      if test -n "$vinfo"; then
+	$echo "$modename: warning: \`-version-info' is ignored for programs" 1>&2
+      fi
+
+      if test -n "$release"; then
+	$echo "$modename: warning: \`-release' is ignored for programs" 1>&2
+      fi
+
+      if test "$preload" = yes; then
+	if test "$dlopen" = unknown && test "$dlopen_self" = unknown &&
+	   test "$dlopen_self_static" = unknown; then
+	  $echo "$modename: warning: \`AC_LIBTOOL_DLOPEN' not used. Assuming no dlopen support."
+	fi 
+      fi
+    
+      if test -n "$rpath$xrpath"; then
+	# If the user specified any rpath flags, then add them.
+	for libdir in $rpath $xrpath; do
+	  # This is the magic to use -rpath.
+	  case "$compile_rpath " in
+	  *" $libdir "*) ;;
+	  *) compile_rpath="$compile_rpath $libdir" ;;
+	  esac
+	  case "$finalize_rpath " in
+	  *" $libdir "*) ;;
+	  *) finalize_rpath="$finalize_rpath $libdir" ;;
+	  esac
+	done
+      fi
+
+      # Now hardcode the library paths
+      rpath=
+      hardcode_libdirs=
+      for libdir in $compile_rpath $finalize_rpath; do
+	if test -n "$hardcode_libdir_flag_spec"; then
+	  if test -n "$hardcode_libdir_separator"; then
+	    if test -z "$hardcode_libdirs"; then
+	      hardcode_libdirs="$libdir"
+	    else
+	      # Just accumulate the unique libdirs.
+	      case "$hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator" in
+	      *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+		;;
+	      *)
+		hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
+		;;
+	      esac
+	    fi
+	  else
+	    eval flag=\"$hardcode_libdir_flag_spec\"
+	    rpath="$rpath $flag"
+	  fi
+	elif test -n "$runpath_var"; then
+	  case "$perm_rpath " in
+	  *" $libdir "*) ;;
+	  *) perm_rpath="$perm_rpath $libdir" ;;
+	  esac
+	fi
+      done
+      # Substitute the hardcoded libdirs into the rpath.
+      if test -n "$hardcode_libdir_separator" &&
+	 test -n "$hardcode_libdirs"; then
+	libdir="$hardcode_libdirs"
+	eval rpath=\" $hardcode_libdir_flag_spec\"
+      fi
+      compile_rpath="$rpath"
+
+      rpath=
+      hardcode_libdirs=
+      for libdir in $finalize_rpath; do
+	if test -n "$hardcode_libdir_flag_spec"; then
+	  if test -n "$hardcode_libdir_separator"; then
+	    if test -z "$hardcode_libdirs"; then
+	      hardcode_libdirs="$libdir"
+	    else
+	      # Just accumulate the unique libdirs.
+	      case "$hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator" in
+	      *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+		;;
+	      *)
+		hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
+		;;
+	      esac
+	    fi
+	  else
+	    eval flag=\"$hardcode_libdir_flag_spec\"
+	    rpath="$rpath $flag"
+	  fi
+	elif test -n "$runpath_var"; then
+	  case "$finalize_perm_rpath " in
+	  *" $libdir "*) ;;
+	  *) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;;
+	  esac
+	fi
+      done
+      # Substitute the hardcoded libdirs into the rpath.
+      if test -n "$hardcode_libdir_separator" &&
+	 test -n "$hardcode_libdirs"; then
+	libdir="$hardcode_libdirs"
+	eval rpath=\" $hardcode_libdir_flag_spec\"
+      fi
+      finalize_rpath="$rpath"
+
+      output_objdir=`$echo "X$output" | $Xsed -e 's%/[^/]*$%%'`
+      if test "X$output_objdir" = "X$output"; then
+	output_objdir="$objdir"
+      else
+	output_objdir="$output_objdir/$objdir"
+      fi
+
+      # Create the binary in the object directory, then wrap it.
+      if test ! -d $output_objdir; then
+	$show "$mkdir $output_objdir"
+	$run $mkdir $output_objdir
+	status=$?
+	if test $status -ne 0 && test ! -d $output_objdir; then
+	  exit $status
+	fi
+      fi
+
+      if test -n "$libobjs" && test "$build_old_libs" = yes; then
+	# Transform all the library objects into standard objects.
+	compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+	finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+      fi
+
+      dlsyms=
+      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+	if test -n "$NM" && test -n "$global_symbol_pipe"; then
+	  dlsyms="${outputname}S.c"
+	else
+	  $echo "$modename: not configured to extract global symbols from dlpreopened files" 1>&2
+	fi
+      fi
+
+      if test -n "$dlsyms"; then
+	case "$dlsyms" in
+	"") ;;
+	*.c)
+	  # Discover the nlist of each of the dlfiles.
+	  nlist="$output_objdir/${outputname}.nm"
+
+	  $show "$rm $nlist ${nlist}S ${nlist}T"
+	  $run $rm "$nlist" "${nlist}S" "${nlist}T"
+
+	  # Parse the name list into a source file.
+	  $show "creating $output_objdir/$dlsyms"
+
+	  test -z "$run" && $echo > "$output_objdir/$dlsyms" "\
+/* $dlsyms - symbol resolution table for \`$outputname' dlsym emulation. */
+/* Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP */
+
+#ifdef __cplusplus
+extern \"C\" {
+#endif
+
+/* Prevent the only kind of declaration conflicts we can make. */
+#define lt_preloaded_symbols some_other_symbol
+
+/* External symbol declarations for the compiler. */\
+"
+
+	  if test "$dlself" = yes; then
+	    $show "generating symbol list for \`$output'"
+
+	    test -z "$run" && $echo ': @PROGRAM@ ' > "$nlist"
+
+	    # Add our own program objects to the symbol list.
+	    progfiles=`$echo "X$objs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+	    for arg in $progfiles; do
+	      $show "extracting global C symbols from \`$arg'"
+	      $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'"
+	    done
+
+	    if test -n "$exclude_expsyms"; then
+	      $run eval 'egrep -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'
+	      $run eval '$mv "$nlist"T "$nlist"'
+	    fi
+	    
+	    if test -n "$export_symbols_regex"; then
+	      $run eval 'egrep -e "$export_symbols_regex" "$nlist" > "$nlist"T'
+	      $run eval '$mv "$nlist"T "$nlist"'
+	    fi
+
+	    # Prepare the list of exported symbols
+	    if test -z "$export_symbols"; then
+	      export_symbols="$output_objdir/$output.exp"
+	      $run $rm $export_symbols
+	      $run eval "sed -n -e '/^: @PROGRAM@$/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
+	    else
+	      $run eval "sed -e 's/\([][.*^$]\)/\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$output.exp"'
+	      $run eval 'grep -f "$output_objdir/$output.exp" < "$nlist" > "$nlist"T'
+	      $run eval 'mv "$nlist"T "$nlist"'
+	    fi
+	  fi
+
+	  for arg in $dlprefiles; do
+	    $show "extracting global C symbols from \`$arg'"
+	    name=`echo "$arg" | sed -e 's%^.*/%%'`
+	    $run eval 'echo ": $name " >> "$nlist"'
+	    $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'"
+	  done
+
+	  if test -z "$run"; then
+	    # Make sure we have at least an empty file.
+	    test -f "$nlist" || : > "$nlist"
+
+	    if test -n "$exclude_expsyms"; then
+	      egrep -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T
+	      $mv "$nlist"T "$nlist"
+	    fi
+
+	    # Try sorting and uniquifying the output.
+	    if grep -v "^: " < "$nlist" | sort +2 | uniq > "$nlist"S; then
+	      :
+	    else
+	      grep -v "^: " < "$nlist" > "$nlist"S
+	    fi
+
+	    if test -f "$nlist"S; then
+	      eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$dlsyms"'
+	    else
+	      echo '/* NONE */' >> "$output_objdir/$dlsyms"
+	    fi
+
+	    $echo >> "$output_objdir/$dlsyms" "\
+
+#undef lt_preloaded_symbols
+
+#if defined (__STDC__) && __STDC__
+# define lt_ptr_t void *
+#else
+# define lt_ptr_t char *
+# define const
+#endif
+
+/* The mapping between symbol names and symbols. */
+const struct {
+  const char *name;
+  lt_ptr_t address;
+}
+lt_preloaded_symbols[] =
+{\
+"
+
+	    sed -n -e 's/^: \([^ ]*\) $/  {\"\1\", (lt_ptr_t) 0},/p' \
+		-e 's/^. \([^ ]*\) \([^ ]*\)$/  {"\2", (lt_ptr_t) \&\2},/p' \
+		  < "$nlist" >> "$output_objdir/$dlsyms"
+
+	    $echo >> "$output_objdir/$dlsyms" "\
+  {0, (lt_ptr_t) 0}
+};
+
+/* This works around a problem in FreeBSD linker */
+#ifdef FREEBSD_WORKAROUND
+static const void *lt_preloaded_setup() {
+  return lt_preloaded_symbols;
+}
+#endif
+
+#ifdef __cplusplus
+}
+#endif\
+"
+	  fi
+
+	  pic_flag_for_symtable=
+	  case "$host" in
+	  # compiling the symbol table file with pic_flag works around
+	  # a FreeBSD bug that causes programs to crash when -lm is
+	  # linked before any other PIC object.  But we must not use
+	  # pic_flag when linking with -static.  The problem exists in
+	  # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1.
+	  *-*-freebsd2*|*-*-freebsd3.0*)
+	    case "$compile_command " in
+	    *" -static "*) ;;
+	    *) pic_flag_for_symtable=" $pic_flag -DPIC -DFREEBSD_WORKAROUND";;
+	    esac
+	  esac
+
+	  # Now compile the dynamic symbol file.
+	  $show "(cd $output_objdir && $C_compiler -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")"
+	  $run eval '(cd $output_objdir && $C_compiler -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $?
+
+	  # Clean up the generated files.
+	  $show "$rm $output_objdir/$dlsyms $nlist ${nlist}S ${nlist}T"
+	  $run $rm "$output_objdir/$dlsyms" "$nlist" "${nlist}S" "${nlist}T"
+
+	  # Transform the symbol file into the correct name.
+	  compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
+	  finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
+	  ;;
+	*)
+	  $echo "$modename: unknown suffix for \`$dlsyms'" 1>&2
+	  exit 1
+	  ;;
+	esac
+      else
+	# We keep going just in case the user didn't refer to
+	# lt_preloaded_symbols.  The linker will fail if global_symbol_pipe
+	# really was required.
+
+	# Nullify the symbol file.
+	compile_command=`$echo "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"`
+	finalize_command=`$echo "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"`
+      fi
+
+      if test -z "$link_against_libtool_libs" || test "$build_libtool_libs" != yes; then
+	# Replace the output file specification.
+	compile_command=`$echo "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
+	link_command="$compile_command$compile_rpath"
+
+	# We have no uninstalled library dependencies, so finalize right now.
+	$show "$link_command"
+	$run eval "$link_command"
+	status=$?
+	
+	# Delete the generated files.
+	if test -n "$dlsyms"; then
+	  $show "$rm $output_objdir/${outputname}S.${objext}"
+	  $run $rm "$output_objdir/${outputname}S.${objext}"
+	fi
+
+	exit $status
+      fi
+
+      if test -n "$shlibpath_var"; then
+	# We should set the shlibpath_var
+	rpath=
+	for dir in $temp_rpath; do
+	  case "$dir" in
+	  [\\/]* | [A-Za-z]:[\\/]*)
+	    # Absolute path.
+	    rpath="$rpath$dir:"
+	    ;;
+	  *)
+	    # Relative path: add a thisdir entry.
+	    rpath="$rpath\$thisdir/$dir:"
+	    ;;
+	  esac
+	done
+	temp_rpath="$rpath"
+      fi
+
+      if test -n "$compile_shlibpath$finalize_shlibpath"; then
+	compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command"
+      fi
+      if test -n "$finalize_shlibpath"; then
+	finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command"
+      fi
+
+      compile_var=
+      finalize_var=
+      if test -n "$runpath_var"; then
+	if test -n "$perm_rpath"; then
+	  # We should set the runpath_var.
+	  rpath=
+	  for dir in $perm_rpath; do
+	    rpath="$rpath$dir:"
+	  done
+	  compile_var="$runpath_var=\"$rpath\$$runpath_var\" "
+	fi
+	if test -n "$finalize_perm_rpath"; then
+	  # We should set the runpath_var.
+	  rpath=
+	  for dir in $finalize_perm_rpath; do
+	    rpath="$rpath$dir:"
+	  done
+	  finalize_var="$runpath_var=\"$rpath\$$runpath_var\" "
+	fi
+      fi
+
+      if test "$hardcode_action" = relink; then
+	# Fast installation is not supported
+	link_command="$compile_var$compile_command$compile_rpath"
+	relink_command="$finalize_var$finalize_command$finalize_rpath"
+	
+	$echo "$modename: warning: this platform does not like uninstalled shared libraries" 1>&2
+	$echo "$modename: \`$output' will be relinked during installation" 1>&2
+      else
+	if test "$fast_install" != no; then
+	  link_command="$finalize_var$compile_command$finalize_rpath"
+	  if test "$fast_install" = yes; then
+	    relink_command=`$echo "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'`
+	  else
+	    # fast_install is set to needless
+	    relink_command=
+	  fi
+	else
+	  link_command="$compile_var$compile_command$compile_rpath"
+	  relink_command="$finalize_var$finalize_command$finalize_rpath"
+	fi
+      fi
+
+      # Replace the output file specification.
+      link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
+      
+      # Delete the old output files.
+      $run $rm $output $output_objdir/$outputname $output_objdir/lt-$outputname
+
+      $show "$link_command"
+      $run eval "$link_command" || exit $?
+
+      # Now create the wrapper script.
+      $show "creating $output"
+
+      # Quote the relink command for shipping.
+      if test -n "$relink_command"; then
+	relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"`
+      fi
+
+      # Quote $echo for shipping.
+      if test "X$echo" = "X$SHELL $0 --fallback-echo"; then
+	case "$0" in
+	[\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $0 --fallback-echo";;
+	*) qecho="$SHELL `pwd`/$0 --fallback-echo";;
+	esac
+	qecho=`$echo "X$qecho" | $Xsed -e "$sed_quote_subst"`
+      else
+	qecho=`$echo "X$echo" | $Xsed -e "$sed_quote_subst"`
+      fi
+
+      # Only actually do things if our run command is non-null.
+      if test -z "$run"; then
+	# win32 will think the script is a binary if it has
+	# a .exe suffix, so we strip it off here.
+	case $output in
+	  *.exe) output=`echo $output|sed 's,.exe$,,'` ;;
+	esac
+	$rm $output
+	trap "$rm $output; exit 1" 1 2 15
+
+	$echo > $output "\
+#! $SHELL
+
+# $output - temporary wrapper script for $objdir/$outputname
+# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
+#
+# The $output program cannot be directly executed until all the libtool
+# libraries that it depends on are installed.
+#
+# This wrapper script should never be moved out of the build directory.
+# If it is, it will not operate correctly.
+
+# Sed substitution that helps us do robust quoting.  It backslashifies
+# metacharacters that are still active within double-quoted strings.
+Xsed='sed -e 1s/^X//'
+sed_quote_subst='$sed_quote_subst'
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+if test \"\${CDPATH+set}\" = set; then CDPATH=; export CDPATH; fi
+
+relink_command=\"$relink_command\"
+
+# This environment variable determines our operation mode.
+if test \"\$libtool_install_magic\" = \"$magic\"; then
+  # install mode needs the following variable:
+  link_against_libtool_libs='$link_against_libtool_libs'
+else
+  # When we are sourced in execute mode, \$file and \$echo are already set.
+  if test \"\$libtool_execute_magic\" != \"$magic\"; then
+    echo=\"$qecho\"
+    file=\"\$0\"
+    # Make sure echo works.
+    if test \"X\$1\" = X--no-reexec; then
+      # Discard the --no-reexec flag, and continue.
+      shift
+    elif test \"X\`(\$echo '\t') 2>/dev/null\`\" = 'X\t'; then
+      # Yippee, \$echo works!
+      :
+    else
+      # Restart under the correct shell, and then maybe \$echo will work.
+      exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"}
+    fi
+  fi\
+"
+	$echo >> $output "\
+
+  # Find the directory that this script lives in.
+  thisdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\`
+  test \"x\$thisdir\" = \"x\$file\" && thisdir=.
+
+  # Follow symbolic links until we get to the real thisdir.
+  file=\`ls -ld \"\$file\" | sed -n 's/.*-> //p'\`
+  while test -n \"\$file\"; do
+    destdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\`
+
+    # If there was a directory component, then change thisdir.
+    if test \"x\$destdir\" != \"x\$file\"; then
+      case \"\$destdir\" in
+      [\\/]* | [A-Za-z]:[\\/]*) thisdir=\"\$destdir\" ;;
+      *) thisdir=\"\$thisdir/\$destdir\" ;;
+      esac
+    fi
+
+    file=\`\$echo \"X\$file\" | \$Xsed -e 's%^.*/%%'\`
+    file=\`ls -ld \"\$thisdir/\$file\" | sed -n 's/.*-> //p'\`
+  done
+
+  # Try to get the absolute directory name.
+  absdir=\`cd \"\$thisdir\" && pwd\`
+  test -n \"\$absdir\" && thisdir=\"\$absdir\"
+"
+
+	if test "$fast_install" = yes; then
+	  echo >> $output "\
+  program=lt-'$outputname'
+  progdir=\"\$thisdir/$objdir\"
+  
+  if test ! -f \"\$progdir/\$program\" || \\
+     { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | sed 1q\`; \\
+       test \"X\$file\" != \"X\$progdir/\$program\"; }; then
+
+    file=\"\$\$-\$program\"
+
+    if test ! -d \"\$progdir\"; then
+      $mkdir \"\$progdir\"
+    else
+      $rm \"\$progdir/\$file\"
+    fi"
+
+	  echo >> $output "\
+
+    # relink executable if necessary
+    if test -n \"\$relink_command\"; then
+      if (cd \"\$thisdir\" && eval \$relink_command); then :
+      else
+	$rm \"\$progdir/\$file\"
+	exit 1
+      fi
+    fi
+
+    $mv \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null ||
+    { $rm \"\$progdir/\$program\";
+      $mv \"\$progdir/\$file\" \"\$progdir/\$program\"; }
+    $rm \"\$progdir/\$file\"
+  fi"
+	else
+	  echo >> $output "\
+  program='$outputname$exeext'
+  progdir=\"\$thisdir/$objdir\"
+"
+	fi
+
+	echo >> $output "\
+
+  if test -f \"\$progdir/\$program\"; then"
+
+	# Export our shlibpath_var if we have one.
+	if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
+	  $echo >> $output "\
+    # Add our own library path to $shlibpath_var
+    $shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
+
+    # Some systems cannot cope with colon-terminated $shlibpath_var
+    # The second colon is a workaround for a bug in BeOS R4 sed
+    $shlibpath_var=\`\$echo \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\`
+
+    export $shlibpath_var
+"
+	fi
+
+	# fixup the dll searchpath if we need to.
+	if test -n "$dllsearchpath"; then
+	  $echo >> $output "\
+    # Add the dll search path components to the executable PATH
+    PATH=$dllsearchpath:\$PATH
+"
+	fi
+
+	$echo >> $output "\
+    if test \"\$libtool_execute_magic\" != \"$magic\"; then
+      # Run the actual program with our arguments.
+"
+	case $host in
+	*-*-cygwin* | *-*-mingw | *-*-os2*)
+	  # win32 systems need to use the prog path for dll
+	  # lookup to work
+	  $echo >> $output "\
+      exec \$progdir\\\\\$program \${1+\"\$@\"}
+"
+	  ;;
+	*)
+	  $echo >> $output "\
+      # Export the path to the program.
+      PATH=\"\$progdir:\$PATH\"
+      export PATH
+
+      exec \$program \${1+\"\$@\"}
+"
+	  ;;
+	esac
+	$echo >> $output "\
+      \$echo \"\$0: cannot exec \$program \${1+\"\$@\"}\"
+      exit 1
+    fi
+  else
+    # The program doesn't exist.
+    \$echo \"\$0: error: \$progdir/\$program does not exist\" 1>&2
+    \$echo \"This script is just a wrapper for \$program.\" 1>&2
+    echo \"See the $PACKAGE documentation for more information.\" 1>&2
+    exit 1
+  fi
+fi\
+"
+	chmod +x $output
+      fi
+      exit 0
+      ;;
+    esac
+
+    # See if we need to build an old-fashioned archive.
+    for oldlib in $oldlibs; do
+
+      if test "$build_libtool_libs" = convenience; then
+	oldobjs="$libobjs_save"
+	addlibs="$convenience"
+	build_libtool_libs=no
+      else
+	if test "$build_libtool_libs" = module; then
+	  oldobjs="$libobjs_save"
+	  build_libtool_libs=no
+	else
+	  oldobjs="$objs "`$echo "X$libobjs_save" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`
+	fi
+	addlibs="$old_convenience"
+      fi
+
+      if test -n "$addlibs"; then
+	gentop="$output_objdir/${outputname}x"
+	$show "${rm}r $gentop"
+	$run ${rm}r "$gentop"
+	$show "mkdir $gentop"
+	$run mkdir "$gentop"
+	status=$?
+	if test $status -ne 0 && test ! -d "$gentop"; then
+	  exit $status
+	fi
+	generated="$generated $gentop"
+	  
+	# Add in members from convenience archives.
+	for xlib in $addlibs; do
+	  # Extract the objects.
+	  case "$xlib" in
+	  [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;;
+	  *) xabs=`pwd`"/$xlib" ;;
+	  esac
+	  xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'`
+	  xdir="$gentop/$xlib"
+
+	  $show "${rm}r $xdir"
+	  $run ${rm}r "$xdir"
+	  $show "mkdir $xdir"
+	  $run mkdir "$xdir"
+	  status=$?
+	  if test $status -ne 0 && test ! -d "$xdir"; then
+	    exit $status
+	  fi
+	  $show "(cd $xdir && $AR x $xabs)"
+	  $run eval "(cd \$xdir && $AR x \$xabs)" || exit $?
+
+	  oldobjs="$oldobjs "`find $xdir -name \*.${objext} -print -o -name \*.lo -print | $NL2SP`
+	done
+      fi
+
+      # Do each command in the archive commands.
+      if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then
+	eval cmds=\"$old_archive_from_new_cmds\"
+      else
+	# Ensure that we have .o objects in place incase we decided
+	# not to build a shared library, and have fallen back to building
+	# static libs even though --disable-static was passed!
+	for oldobj in $oldobjs; do
+	  if test ! -f $oldobj; then
+	    obj=`$echo "X$oldobj" | $Xsed -e "$o2lo"`
+	    $show "${LN_S} $obj $oldobj"
+	    $run ${LN_S} $obj $oldobj || exit $?
+	  fi
+	done
+
+	eval cmds=\"$old_archive_cmds\"
+      fi
+      IFS="${IFS= 	}"; save_ifs="$IFS"; IFS='~'
+      for cmd in $cmds; do
+	IFS="$save_ifs"
+	$show "$cmd"
+	$run eval "$cmd" || exit $?
+      done
+      IFS="$save_ifs"
+    done
+
+    if test -n "$generated"; then
+      $show "${rm}r$generated"
+      $run ${rm}r$generated
+    fi
+
+    # Now create the libtool archive.
+    case "$output" in
+    *.la)
+      old_library=
+      test "$build_old_libs" = yes && old_library="$libname.$libext"
+      $show "creating $output"
+
+      if test -n "$xrpath"; then
+	temp_xrpath=
+	for libdir in $xrpath; do
+	  temp_xrpath="$temp_xrpath -R$libdir"
+	done
+	dependency_libs="$temp_xrpath $dependency_libs"
+      fi
+
+      # Only create the output if not a dry run.
+      if test -z "$run"; then
+	for installed in no yes; do
+	  if test "$installed" = yes; then
+	    if test -z "$install_libdir"; then
+	      break
+	    fi
+	    output="$output_objdir/$outputname"i
+	  fi
+	  $rm $output
+	  $echo > $output "\
+# $outputname - a libtool library file
+# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
+#
+# Please DO NOT delete this file!
+# It is necessary for linking the library.
+
+# The name that we can dlopen(3).
+dlname='$dlname'
+
+# Names of this library.
+library_names='$library_names'
+
+# The name of the static archive.
+old_library='$old_library'
+
+# Libraries that this one depends upon.
+dependency_libs='$dependency_libs'
+
+# Version information for $libname.
+current=$current
+age=$age
+revision=$revision
+
+# Is this an already installed library?
+installed=$installed
+
+# Directory that this library needs to be installed in:
+libdir='$install_libdir'\
+"
+	done
+      fi
+
+      # Do a symbolic link so that the libtool archive can be found in
+      # LD_LIBRARY_PATH before the program is installed.
+      $show "(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)"
+      $run eval "(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)" || exit $?
+      ;;
+    esac
+    exit 0
+    ;;
+
+  # libtool install mode
+  install)
+    modename="$modename: install"
+
+    # There may be an optional sh(1) argument at the beginning of
+    # install_prog (especially on Windows NT).
+    if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh; then
+      # Aesthetically quote it.
+      arg=`$echo "X$nonopt" | $Xsed -e "$sed_quote_subst"`
+      case "$arg" in
+      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*)
+	arg="\"$arg\""
+	;;
+      esac
+      install_prog="$arg "
+      arg="$1"
+      shift
+    else
+      install_prog=
+      arg="$nonopt"
+    fi
+
+    # The real first argument should be the name of the installation program.
+    # Aesthetically quote it.
+    arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
+    case "$arg" in
+    *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*)
+      arg="\"$arg\""
+      ;;
+    esac
+    install_prog="$install_prog$arg"
+
+    # We need to accept at least all the BSD install flags.
+    dest=
+    files=
+    opts=
+    prev=
+    install_type=
+    isdir=no
+    stripme=
+    for arg
+    do
+      if test -n "$dest"; then
+	files="$files $dest"
+	dest="$arg"
+	continue
+      fi
+
+      case "$arg" in
+      -d) isdir=yes ;;
+      -f) prev="-f" ;;
+      -g) prev="-g" ;;
+      -m) prev="-m" ;;
+      -o) prev="-o" ;;
+      -s)
+	stripme=" -s"
+	continue
+	;;
+      -*) ;;
+
+      *)
+	# If the previous option needed an argument, then skip it.
+	if test -n "$prev"; then
+	  prev=
+	else
+	  dest="$arg"
+	  continue
+	fi
+	;;
+      esac
+
+      # Aesthetically quote the argument.
+      arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
+      case "$arg" in
+      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*)
+	arg="\"$arg\""
+	;;
+      esac
+      install_prog="$install_prog $arg"
+    done
+
+    if test -z "$install_prog"; then
+      $echo "$modename: you must specify an install program" 1>&2
+      $echo "$help" 1>&2
+      exit 1
+    fi
+
+    if test -n "$prev"; then
+      $echo "$modename: the \`$prev' option requires an argument" 1>&2
+      $echo "$help" 1>&2
+      exit 1
+    fi
+
+    if test -z "$files"; then
+      if test -z "$dest"; then
+	$echo "$modename: no file or destination specified" 1>&2
+      else
+	$echo "$modename: you must specify a destination" 1>&2
+      fi
+      $echo "$help" 1>&2
+      exit 1
+    fi
+
+    # Strip any trailing slash from the destination.
+    dest=`$echo "X$dest" | $Xsed -e 's%/$%%'`
+
+    # Check to see that the destination is a directory.
+    test -d "$dest" && isdir=yes
+    if test "$isdir" = yes; then
+      destdir="$dest"
+      destname=
+    else
+      destdir=`$echo "X$dest" | $Xsed -e 's%/[^/]*$%%'`
+      test "X$destdir" = "X$dest" && destdir=.
+      destname=`$echo "X$dest" | $Xsed -e 's%^.*/%%'`
+
+      # Not a directory, so check to see that there is only one file specified.
+      set dummy $files
+      if test $# -gt 2; then
+	$echo "$modename: \`$dest' is not a directory" 1>&2
+	$echo "$help" 1>&2
+	exit 1
+      fi
+    fi
+    case "$destdir" in
+    [\\/]* | [A-Za-z]:[\\/]*) ;;
+    *)
+      for file in $files; do
+	case "$file" in
+	*.lo) ;;
+	*)
+	  $echo "$modename: \`$destdir' must be an absolute directory name" 1>&2
+	  $echo "$help" 1>&2
+	  exit 1
+	  ;;
+	esac
+      done
+      ;;
+    esac
+
+    # This variable tells wrapper scripts just to set variables rather
+    # than running their programs.
+    libtool_install_magic="$magic"
+
+    staticlibs=
+    future_libdirs=
+    current_libdirs=
+    for file in $files; do
+
+      # Do each installation.
+      case "$file" in
+      *.a | *.lib)
+	# Do the static libraries later.
+	staticlibs="$staticlibs $file"
+	;;
+
+      *.la)
+	# Check to see that this really is a libtool archive.
+	if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
+	else
+	  $echo "$modename: \`$file' is not a valid libtool archive" 1>&2
+	  $echo "$help" 1>&2
+	  exit 1
+	fi
+
+	library_names=
+	old_library=
+	# If there is no directory component, then add one.
+	case "$file" in
+	*/* | *\\*) . $file ;;
+	*) . ./$file ;;
+	esac
+
+	# Add the libdir to current_libdirs if it is the destination.
+	if test "X$destdir" = "X$libdir"; then
+	  case "$current_libdirs " in
+	  *" $libdir "*) ;;
+	  *) current_libdirs="$current_libdirs $libdir" ;;
+	  esac
+	else
+	  # Note the libdir as a future libdir.
+	  case "$future_libdirs " in
+	  *" $libdir "*) ;;
+	  *) future_libdirs="$future_libdirs $libdir" ;;
+	  esac
+	fi
+
+	dir="`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`/"
+	test "X$dir" = "X$file/" && dir=
+	dir="$dir$objdir"
+
+	# See the names of the shared library.
+	set dummy $library_names
+	if test -n "$2"; then
+	  realname="$2"
+	  shift
+	  shift
+
+	  # Install the shared library and build the symlinks.
+	  $show "$install_prog$stripme $dir/$realname $destdir/$realname"
+	  $run eval "$install_prog$stripme $dir/$realname $destdir/$realname" || exit $?
+
+	  if test $# -gt 0; then
+	    # Delete the old symlinks, and create new ones.
+	    for linkname
+	    do
+	      if test "$linkname" != "$realname"; then
+		$show "(cd $destdir && $rm $linkname && $LN_S $realname $linkname)"
+		$run eval "(cd $destdir && $rm $linkname && $LN_S $realname $linkname)"
+	      fi
+	    done
+	  fi
+
+	  # Do each command in the postinstall commands.
+	  lib="$destdir/$realname"
+	  eval cmds=\"$postinstall_cmds\"
+	  IFS="${IFS= 	}"; save_ifs="$IFS"; IFS='~'
+	  for cmd in $cmds; do
+	    IFS="$save_ifs"
+	    $show "$cmd"
+	    $run eval "$cmd" || exit $?
+	  done
+	  IFS="$save_ifs"
+	fi
+
+	# Install the pseudo-library for information purposes.
+	name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
+	instname="$dir/$name"i
+	$show "$install_prog $instname $destdir/$name"
+	$run eval "$install_prog $instname $destdir/$name" || exit $?
+
+	# Maybe install the static library, too.
+	test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library"
+	;;
+
+      *.lo)
+	# Install (i.e. copy) a libtool object.
+
+	# Figure out destination file name, if it wasn't already specified.
+	if test -n "$destname"; then
+	  destfile="$destdir/$destname"
+	else
+	  destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
+	  destfile="$destdir/$destfile"
+	fi
+
+	# Deduce the name of the destination old-style object file.
+	case "$destfile" in
+	*.lo)
+	  staticdest=`$echo "X$destfile" | $Xsed -e "$lo2o"`
+	  ;;
+	*.o | *.obj)
+	  staticdest="$destfile"
+	  destfile=
+	  ;;
+	*)
+	  $echo "$modename: cannot copy a libtool object to \`$destfile'" 1>&2
+	  $echo "$help" 1>&2
+	  exit 1
+	  ;;
+	esac
+
+	# Install the libtool object if requested.
+	if test -n "$destfile"; then
+	  $show "$install_prog $file $destfile"
+	  $run eval "$install_prog $file $destfile" || exit $?
+	fi
+
+	# Install the old object if enabled.
+	if test "$build_old_libs" = yes; then
+	  # Deduce the name of the old-style object file.
+	  staticobj=`$echo "X$file" | $Xsed -e "$lo2o"`
+
+	  $show "$install_prog $staticobj $staticdest"
+	  $run eval "$install_prog \$staticobj \$staticdest" || exit $?
+	fi
+	exit 0
+	;;
+
+      *)
+	# Figure out destination file name, if it wasn't already specified.
+	if test -n "$destname"; then
+	  destfile="$destdir/$destname"
+	else
+	  destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
+	  destfile="$destdir/$destfile"
+	fi
+
+	# Do a test to see if this is really a libtool program.
+	if (sed -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+	  link_against_libtool_libs=
+	  relink_command=
+
+	  # If there is no directory component, then add one.
+	  case "$file" in
+	  */* | *\\*) . $file ;;
+	  *) . ./$file ;;
+	  esac
+
+	  # Check the variables that should have been set.
+	  if test -z "$link_against_libtool_libs"; then
+	    $echo "$modename: invalid libtool wrapper script \`$file'" 1>&2
+	    exit 1
+	  fi
+
+	  finalize=yes
+	  for lib in $link_against_libtool_libs; do
+	    # Check to see that each library is installed.
+	    libdir=
+	    if test -f "$lib"; then
+	      # If there is no directory component, then add one.
+	      case "$lib" in
+	      */* | *\\*) . $lib ;;
+	      *) . ./$lib ;;
+	      esac
+	    fi
+	    libfile="$libdir/`$echo "X$lib" | $Xsed -e 's%^.*/%%g'`"
+	    if test -n "$libdir" && test ! -f "$libfile"; then
+	      $echo "$modename: warning: \`$lib' has not been installed in \`$libdir'" 1>&2
+	      finalize=no
+	    fi
+	  done
+
+	  outputname=
+	  if test "$fast_install" = no && test -n "$relink_command"; then
+	    if test "$finalize" = yes && test -z "$run"; then
+	      tmpdir="/tmp"
+	      test -n "$TMPDIR" && tmpdir="$TMPDIR"
+	      tmpdir="$tmpdir/libtool-$$"
+	      if $mkdir -p "$tmpdir" && chmod 700 "$tmpdir"; then :
+	      else
+		$echo "$modename: error: cannot create temporary directory \`$tmpdir'" 1>&2
+		continue
+	      fi
+	      outputname="$tmpdir/$file"
+	      # Replace the output file specification.
+	      relink_command=`$echo "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'`
+
+	      $show "$relink_command"
+	      if $run eval "$relink_command"; then :
+	      else
+		$echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2
+		${rm}r "$tmpdir"
+		continue
+	      fi
+	      file="$outputname"
+	    else
+	      $echo "$modename: warning: cannot relink \`$file'" 1>&2
+	    fi
+	  else
+	    # Install the binary that we compiled earlier.
+	    file=`$echo "X$file" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"`
+	  fi
+	fi
+
+	$show "$install_prog$stripme $file $destfile"
+	$run eval "$install_prog\$stripme \$file \$destfile" || exit $?
+	test -n "$outputname" && ${rm}r "$tmpdir"
+	;;
+      esac
+    done
+
+    for file in $staticlibs; do
+      name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
+
+      # Set up the ranlib parameters.
+      oldlib="$destdir/$name"
+
+      $show "$install_prog $file $oldlib"
+      $run eval "$install_prog \$file \$oldlib" || exit $?
+
+      # Do each command in the postinstall commands.
+      eval cmds=\"$old_postinstall_cmds\"
+      IFS="${IFS= 	}"; save_ifs="$IFS"; IFS='~'
+      for cmd in $cmds; do
+	IFS="$save_ifs"
+	$show "$cmd"
+	$run eval "$cmd" || exit $?
+      done
+      IFS="$save_ifs"
+    done
+
+    if test -n "$future_libdirs"; then
+      $echo "$modename: warning: remember to run \`$progname --finish$future_libdirs'" 1>&2
+    fi
+
+    if test -n "$current_libdirs"; then
+      # Maybe just do a dry run.
+      test -n "$run" && current_libdirs=" -n$current_libdirs"
+      exec $SHELL $0 --finish$current_libdirs
+      exit 1
+    fi
+
+    exit 0
+    ;;
+
+  # libtool finish mode
+  finish)
+    modename="$modename: finish"
+    libdirs="$nonopt"
+    admincmds=
+
+    if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
+      for dir
+      do
+	libdirs="$libdirs $dir"
+      done
+
+      for libdir in $libdirs; do
+	if test -n "$finish_cmds"; then
+	  # Do each command in the finish commands.
+	  eval cmds=\"$finish_cmds\"
+	  IFS="${IFS= 	}"; save_ifs="$IFS"; IFS='~'
+	  for cmd in $cmds; do
+	    IFS="$save_ifs"
+	    $show "$cmd"
+	    $run eval "$cmd" || admincmds="$admincmds
+       $cmd"
+	  done
+	  IFS="$save_ifs"
+	fi
+	if test -n "$finish_eval"; then
+	  # Do the single finish_eval.
+	  eval cmds=\"$finish_eval\"
+	  $run eval "$cmds" || admincmds="$admincmds
+       $cmds"
+	fi
+      done
+    fi
+
+    # Exit here if they wanted silent mode.
+    test "$show" = : && exit 0
+
+    echo "----------------------------------------------------------------------"
+    echo "Libraries have been installed in:"
+    for libdir in $libdirs; do
+      echo "   $libdir"
+    done
+    echo
+    echo "If you ever happen to want to link against installed libraries"
+    echo "in a given directory, LIBDIR, you must either use libtool, and"
+    echo "specify the full pathname of the library, or use \`-LLIBDIR'"
+    echo "flag during linking and do at least one of the following:"
+    if test -n "$shlibpath_var"; then
+      echo "   - add LIBDIR to the \`$shlibpath_var' environment variable"
+      echo "     during execution"
+    fi
+    if test -n "$runpath_var"; then
+      echo "   - add LIBDIR to the \`$runpath_var' environment variable"
+      echo "     during linking"
+    fi
+    if test -n "$hardcode_libdir_flag_spec"; then
+      libdir=LIBDIR
+      eval flag=\"$hardcode_libdir_flag_spec\"
+
+      echo "   - use the \`$flag' linker flag"
+    fi
+    if test -n "$admincmds"; then
+      echo "   - have your system administrator run these commands:$admincmds"
+    fi
+    if test -f /etc/ld.so.conf; then
+      echo "   - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
+    fi
+    echo
+    echo "See any operating system documentation about shared libraries for"
+    echo "more information, such as the ld(1) and ld.so(8) manual pages."
+    echo "----------------------------------------------------------------------"
+    exit 0
+    ;;
+
+  # libtool execute mode
+  execute)
+    modename="$modename: execute"
+
+    # The first argument is the command name.
+    cmd="$nonopt"
+    if test -z "$cmd"; then
+      $echo "$modename: you must specify a COMMAND" 1>&2
+      $echo "$help"
+      exit 1
+    fi
+
+    # Handle -dlopen flags immediately.
+    for file in $execute_dlfiles; do
+      if test ! -f "$file"; then
+	$echo "$modename: \`$file' is not a file" 1>&2
+	$echo "$help" 1>&2
+	exit 1
+      fi
+
+      dir=
+      case "$file" in
+      *.la)
+	# Check to see that this really is a libtool archive.
+	if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
+	else
+	  $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
+	  $echo "$help" 1>&2
+	  exit 1
+	fi
+
+	# Read the libtool library.
+	dlname=
+	library_names=
+
+	# If there is no directory component, then add one.
+	case "$file" in
+	*/* | *\\*) . $file ;;
+	*) . ./$file ;;
+	esac
+
+	# Skip this library if it cannot be dlopened.
+	if test -z "$dlname"; then
+	  # Warn if it was a shared library.
+	  test -n "$library_names" && $echo "$modename: warning: \`$file' was not linked with \`-export-dynamic'"
+	  continue
+	fi
+
+	dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
+	test "X$dir" = "X$file" && dir=.
+
+	if test -f "$dir/$objdir/$dlname"; then
+	  dir="$dir/$objdir"
+	else
+	  $echo "$modename: cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" 1>&2
+	  exit 1
+	fi
+	;;
+
+      *.lo)
+	# Just add the directory containing the .lo file.
+	dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
+	test "X$dir" = "X$file" && dir=.
+	;;
+
+      *)
+	$echo "$modename: warning \`-dlopen' is ignored for non-libtool libraries and objects" 1>&2
+	continue
+	;;
+      esac
+
+      # Get the absolute pathname.
+      absdir=`cd "$dir" && pwd`
+      test -n "$absdir" && dir="$absdir"
+
+      # Now add the directory to shlibpath_var.
+      if eval "test -z \"\$$shlibpath_var\""; then
+	eval "$shlibpath_var=\"\$dir\""
+      else
+	eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\""
+      fi
+    done
+
+    # This variable tells wrapper scripts just to set shlibpath_var
+    # rather than running their programs.
+    libtool_execute_magic="$magic"
+
+    # Check if any of the arguments is a wrapper script.
+    args=
+    for file
+    do
+      case "$file" in
+      -*) ;;
+      *)
+	# Do a test to see if this is really a libtool program.
+	if (sed -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+	  # If there is no directory component, then add one.
+	  case "$file" in
+	  */* | *\\*) . $file ;;
+	  *) . ./$file ;;
+	  esac
+
+	  # Transform arg to wrapped name.
+	  file="$progdir/$program"
+	fi
+	;;
+      esac
+      # Quote arguments (to preserve shell metacharacters).
+      file=`$echo "X$file" | $Xsed -e "$sed_quote_subst"`
+      args="$args \"$file\""
+    done
+
+    if test -z "$run"; then
+      # Export the shlibpath_var.
+      eval "export $shlibpath_var"
+
+      # Restore saved enviroment variables
+      if test "${save_LC_ALL+set}" = set; then
+	LC_ALL="$save_LC_ALL"; export LC_ALL
+      fi
+      if test "${save_LANG+set}" = set; then
+	LANG="$save_LANG"; export LANG
+      fi
+
+      # Now actually exec the command.
+      eval "exec \$cmd$args"
+
+      $echo "$modename: cannot exec \$cmd$args"
+      exit 1
+    else
+      # Display what would be done.
+      eval "\$echo \"\$shlibpath_var=\$$shlibpath_var\""
+      $echo "export $shlibpath_var"
+      $echo "$cmd$args"
+      exit 0
+    fi
+    ;;
+
+  # libtool uninstall mode
+  uninstall)
+    modename="$modename: uninstall"
+    rm="$nonopt"
+    files=
+
+    for arg
+    do
+      case "$arg" in
+      -*) rm="$rm $arg" ;;
+      *) files="$files $arg" ;;
+      esac
+    done
+
+    if test -z "$rm"; then
+      $echo "$modename: you must specify an RM program" 1>&2
+      $echo "$help" 1>&2
+      exit 1
+    fi
+
+    for file in $files; do
+      dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
+      test "X$dir" = "X$file" && dir=.
+      name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
+
+      rmfiles="$file"
+
+      case "$name" in
+      *.la)
+	# Possibly a libtool archive, so verify it.
+	if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+	  . $dir/$name
+
+	  # Delete the libtool libraries and symlinks.
+	  for n in $library_names; do
+	    rmfiles="$rmfiles $dir/$n"
+	  done
+	  test -n "$old_library" && rmfiles="$rmfiles $dir/$old_library"
+
+	  $show "$rm $rmfiles"
+	  $run $rm $rmfiles
+
+	  if test -n "$library_names"; then
+	    # Do each command in the postuninstall commands.
+	    eval cmds=\"$postuninstall_cmds\"
+	    IFS="${IFS= 	}"; save_ifs="$IFS"; IFS='~'
+	    for cmd in $cmds; do
+	      IFS="$save_ifs"
+	      $show "$cmd"
+	      $run eval "$cmd"
+	    done
+	    IFS="$save_ifs"
+	  fi
+
+	  if test -n "$old_library"; then
+	    # Do each command in the old_postuninstall commands.
+	    eval cmds=\"$old_postuninstall_cmds\"
+	    IFS="${IFS= 	}"; save_ifs="$IFS"; IFS='~'
+	    for cmd in $cmds; do
+	      IFS="$save_ifs"
+	      $show "$cmd"
+	      $run eval "$cmd"
+	    done
+	    IFS="$save_ifs"
+	  fi
+
+	  # FIXME: should reinstall the best remaining shared library.
+	fi
+	;;
+
+      *.lo)
+	if test "$build_old_libs" = yes; then
+	  oldobj=`$echo "X$name" | $Xsed -e "$lo2o"`
+	  rmfiles="$rmfiles $dir/$oldobj"
+	fi
+	$show "$rm $rmfiles"
+	$run $rm $rmfiles
+	;;
+
+      *)
+	$show "$rm $rmfiles"
+	$run $rm $rmfiles
+	;;
+      esac
+    done
+    exit 0
+    ;;
+
+  "")
+    $echo "$modename: you must specify a MODE" 1>&2
+    $echo "$generic_help" 1>&2
+    exit 1
+    ;;
+  esac
+
+  $echo "$modename: invalid operation mode \`$mode'" 1>&2
+  $echo "$generic_help" 1>&2
+  exit 1
+fi # test -z "$show_help"
+
+# We need to display help for each of the modes.
+case "$mode" in
+"") $echo \
+"Usage: $modename [OPTION]... [MODE-ARG]...
+
+Provide generalized library-building support services.
+
+    --config          show all configuration variables
+    --debug           enable verbose shell tracing
+-n, --dry-run         display commands without modifying any files
+    --features        display basic configuration information and exit
+    --finish          same as \`--mode=finish'
+    --help            display this help message and exit
+    --mode=MODE       use operation mode MODE [default=inferred from MODE-ARGS]
+    --quiet           same as \`--silent'
+    --silent          don't print informational messages
+    --version         print version information
+
+MODE must be one of the following:
+
+      compile         compile a source file into a libtool object
+      execute         automatically set library path, then run a program
+      finish          complete the installation of libtool libraries
+      install         install libraries or executables
+      link            create a library or an executable
+      uninstall       remove libraries from an installed directory
+
+MODE-ARGS vary depending on the MODE.  Try \`$modename --help --mode=MODE' for
+a more detailed description of MODE."
+  exit 0
+  ;;
+
+compile)
+  $echo \
+"Usage: $modename [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE
+
+Compile a source file into a libtool library object.
+
+This mode accepts the following additional options:
+
+  -o OUTPUT-FILE    set the output file name to OUTPUT-FILE
+  -static           always build a \`.o' file suitable for static linking
+
+COMPILE-COMMAND is a command to be used in creating a \`standard' object file
+from the given SOURCEFILE.
+
+The output file name is determined by removing the directory component from
+SOURCEFILE, then substituting the C source code suffix \`.c' with the
+library object suffix, \`.lo'."
+  ;;
+
+execute)
+  $echo \
+"Usage: $modename [OPTION]... --mode=execute COMMAND [ARGS]...
+
+Automatically set library path, then run a program.
+
+This mode accepts the following additional options:
+
+  -dlopen FILE      add the directory containing FILE to the library path
+
+This mode sets the library path environment variable according to \`-dlopen'
+flags.
+
+If any of the ARGS are libtool executable wrappers, then they are translated
+into their corresponding uninstalled binary, and any of their required library
+directories are added to the library path.
+
+Then, COMMAND is executed, with ARGS as arguments."
+  ;;
+
+finish)
+  $echo \
+"Usage: $modename [OPTION]... --mode=finish [LIBDIR]...
+
+Complete the installation of libtool libraries.
+
+Each LIBDIR is a directory that contains libtool libraries.
+
+The commands that this mode executes may require superuser privileges.  Use
+the \`--dry-run' option if you just want to see what would be executed."
+  ;;
+
+install)
+  $echo \
+"Usage: $modename [OPTION]... --mode=install INSTALL-COMMAND...
+
+Install executables or libraries.
+
+INSTALL-COMMAND is the installation command.  The first component should be
+either the \`install' or \`cp' program.
+
+The rest of the components are interpreted as arguments to that command (only
+BSD-compatible install options are recognized)."
+  ;;
+
+link)
+  $echo \
+"Usage: $modename [OPTION]... --mode=link LINK-COMMAND...
+
+Link object files or libraries together to form another library, or to
+create an executable program.
+
+LINK-COMMAND is a command using the C compiler that you would use to create
+a program from several object files.
+
+The following components of LINK-COMMAND are treated specially:
+
+  -all-static       do not do any dynamic linking at all
+  -avoid-version    do not add a version suffix if possible
+  -dlopen FILE      \`-dlpreopen' FILE if it cannot be dlopened at runtime
+  -dlpreopen FILE   link in FILE and add its symbols to lt_preloaded_symbols
+  -export-dynamic   allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
+  -export-symbols SYMFILE
+		    try to export only the symbols listed in SYMFILE
+  -export-symbols-regex REGEX
+		    try to export only the symbols matching REGEX
+  -LLIBDIR          search LIBDIR for required installed libraries
+  -lNAME            OUTPUT-FILE requires the installed library libNAME
+  -module           build a library that can dlopened
+  -no-undefined     declare that a library does not refer to external symbols
+  -o OUTPUT-FILE    create OUTPUT-FILE from the specified objects
+  -release RELEASE  specify package release information
+  -rpath LIBDIR     the created library will eventually be installed in LIBDIR
+  -R[ ]LIBDIR       add LIBDIR to the runtime path of programs and libraries
+  -static           do not do any dynamic linking of libtool libraries
+  -version-info CURRENT[:REVISION[:AGE]]
+		    specify library version info [each variable defaults to 0]
+
+All other options (arguments beginning with \`-') are ignored.
+
+Every other argument is treated as a filename.  Files ending in \`.la' are
+treated as uninstalled libtool libraries, other files are standard or library
+object files.
+
+If the OUTPUT-FILE ends in \`.la', then a libtool library is created,
+only library objects (\`.lo' files) may be specified, and \`-rpath' is
+required, except when creating a convenience library.
+
+If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created
+using \`ar' and \`ranlib', or on Windows using \`lib'.
+
+If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file
+is created, otherwise an executable program is created."
+  ;;
+
+uninstall)
+  $echo \
+"Usage: $modename [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE...
+
+Remove libraries from an installation directory.
+
+RM is the name of the program to use to delete files associated with each FILE
+(typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed
+to RM.
+
+If FILE is a libtool library, all the files associated with it are deleted.
+Otherwise, only FILE itself is deleted using RM."
+  ;;
+
+*)
+  $echo "$modename: invalid operation mode \`$mode'" 1>&2
+  $echo "$help" 1>&2
+  exit 1
+  ;;
+esac
+
+echo
+$echo "Try \`$modename --help' for more information about other modes."
+
+exit 0
+
+# Local Variables:
+# mode:shell-script
+# sh-indentation:2
+# End:
--- /dev/null
+++ jpeg-6b/testimg.uu
@@ -0,0 +1,873 @@
+begin 664 testimg.gif
+M1TE&.#=AXP"5`/<``"PJ+&F/3)DN)4=;.)=43*#)F+R,>EI;F=%238.,O]T?
+M*7)83%TL)WRK8=`Y+L]S;=K.K#8[*Y&1='%U6YET9N\U,>+HR5-U1/-06)<\
+M+6)"-4-`7W)UH)FNKU-99KJRI'23=$@_,KQ33+X[+6UG5J*+O=K3V(5`,M!$
+M/=%B77-VQ/LU6X=W9%E:.H^A=.+HW^:KIO9B9IBP?O/LW9AVGG.=5K2TZTY-
+M-_9R<:18>/H<-'5W<TPH*I9A5IA%-[R]I?O\]\/APG]WH&]@;.';JM!4;%Y2
+M8EUI38^>J(,Q*LG(L],]1F-U8%U./KX_1YV3V'F,9/!%1W5LF[E:>:>ADHEI
+M5IB^AKQR:?I4<CM,,?A&9/4K,G.<=_#>VL!@7]%(48^/W(A:3F)I9N`X,J>0
+M?8=.1(2!JKTC)$A"/OEE=\UD@2PQ+&IIEV""2).@C_?O\?F!@^2-B>!33_DK
+M2;Y$-W!J>H>$S*A325]<2LV"@ZNOW3H_-7"#64]/2,[`LDMI//(Y0+R@D;UV
+MG>&BG+F-L5%.9=W`M)F`</3.PL;)SJO+LJ.BJ)^?W=&CF?#=R8JW=Y2=WL^Q
+MI::]O,#`U+R!=9>"M&(V+;YHAM$M*IIE@N'\Y4@T+V!;:_FQK+\Q*-_=W<]T
+MDJ-OA,^/BH5<;ON.D+>?O(>#<(FMA)\]0/>?HJ>MD5-1C'N!R,?6M<O5UY"1
+MBXZ/Q>WHMTU#:H"1?G6"=*EC6<KMS(ANF("@>[R#H:A#-#<R+MZ!@ZF#IW1_
+MK3Q,/DM<1J_+EV9@E]G.Q:BPL;FTN+U58.%C87VB9<!V@G!`-F]./ZB^C>^_
+MN>$M+:AE?F&!8($Z+KY(1Z_3K*DQ)N%S<JIS9.)5:N$]1>)D=N!TBH9K?VJ/
+M8_IU?][;QI2:S/'A\JBN^*:@Q:"C\5]W2KZ^O69JLK2Z_,$Q06\M+9>QE*63
+MD:M58<B*J#0J+8:N;ZD[*]]$0*9XI.%'4*F!<6\X+[F5B&UA4SA$*O186YV4
+MQ?H\7^+OWN>SIW>57+QH8BP`````XP"5```(_P#=K=FU:]>N7;MV[=JU:]>N
+M7;MV[=JU:]>N7;MV[=JU:]>N7;O<N=OESIT[=^[<N7/GSIT[=^[6N%OC;HV[
+M7;MV[=JU:U>$71%"A`@1(D0(-&C0W`@1XD:(&R$TA%"F[$09'[IT2:-#!X4T
+M%"CF18D2)4H40(```0($*`JV)2A&T!FA:P0=>'3@Z=*E*T.&##XR^#B1(<.)
+M#!DR^,B0(4,&'QE\9,B001<=.G1&T-'EHXRR$)MV[=JU:]<N=[MV[=JU:]<N
+M=[O6K'&WQMT:=[O<N7/GSMVN32&4E2E#@,"S4*$JF;&3@(.P0K(*R2I42,R.
+M5XLZ4''SBA:)%GT*%?\RLFN-NS5K=NW:M6O7KEV;=NW:M&O7KEV[=NW:M6O7
+M+H"[=NW:M6O7+G?N=KG;Y6Z7NUWN=KG;Y0Z`NS7NUNS:M6;7KEV[(NR*L"O$
+MKCTA0J!!$^)&B!`:0H0(H2%$"`W*EIWPX4.7+CITZ*"0AF(>H'GSH@"*$@40
+M($"`L,5S@`(>'7ATX-&!ITL7/%T9=/GPD2'#B0P93F3(<"+#B0P93F3(X"-#
+M!A^H=.FB0X<.'5UW3BC;M"G$KCV[=NW:M6O7KEV[W.W:M6O-KC5KUKA;L\N=
+M.W?NW+G;M$F#LC($".2P1H.&&3.L.!R0)4M6'UF%.-69]<H-%3<23!TQTL+_
+MB)%":]:XV^5NUZY=NW;MVK5KUZY=NW:YV^5NE[M-[G:YV^5NE[M=[G:Y<^?.
+MG3MWN]RYV^5NE[M=[M:XV^5N%\`UNW;MVA5AUZX0NW:%"!$B1(@0(4*$"!$B
+MA(80-T)H"*%!V8D3/C)D@`>/#ATZ=.;%PQ8E7I0H@``!B@(H2CP4(T;H&J%K
+M!#Q=(W3I@J<K0X8,/C)D.)$APXD,&3)D.)$A0X83&7QD0`6/#ATZ=.C0T47@
+MA+(0FW9MVK5KUZY=NW;MVK5KUZXUN]:L6>-NS1IW:]SM<N?.W:9=FRPI4U:&
+M0(Y,F8288>7+W`%9LF3)*B2K#Z<=9B3,>F5J!PD\_WV,>##B;LV:-;O<K=FU
+M:]>N7;MV[=KE;I.[7>YVN=NU:]<N=YMV[=JURYV[7>YVN7/G;I>[7>YVN5NS
+M:]>N-;MV[=H58=>N71%V[=H58E>(""%"A`@1(D2($"%"A`B!!F"()AHT*#MQ
+M(DF&#/!TZ9(F#<62>/&B`(H"*`H@0(#BQ7-`9\0(72-TP=,%3Q<\'_!\9/"1
+M(<.)#!E.9,@0[42&:!E.9,APPD<&'ZATT:%#AXX(701.:`BQ:=.>/9OV[-JU
+M:]>N7;MVK=FU9LV:76O6[%JS:]>N7>[<N=NU*80E9<K*E.FQ38@07[[8K)(E
+M2Y:L0ALV%.*T8\<.6CLF'/_QT,(('B-K``!8LV:7NUUKW.URM\O=KEWNW+G;
+MY6[7+G>[W.W:Y<[=+G?NW.URM\;=&G>[=NURM\O=+G>[UNS:M6O-KEV[=NW:
+MM2O"K@B[=H78%2)$B$TA-FW:%")$B!`W;H1HHF&9LA/1HF7(H$N7-#I?4,2+
+M%R\*($"```&*`C`>"CHC=.F"IPO>"%WPX.G*`,]'A@P93F0XD>%$AA,9,IS(
+M<"+#B0P9?&3P`8\.G1%TZ-"Y<T*9ADV[]FS:M6O3KEV[=NU:LVO-KC6[UJQ9
+MLV;7FC7N=NW:Y<Z=.W>;&(2HITS9LE';I`A18<[<*EFR9,F2)0O-AE^%.(D1
+M(P;_CX<6'O`8P0,`P!IW:]:X6[/+W2YWN]SM<N=NESMW[MRY<^=NESMW[G:Y
+M<[?+W1IW[M:X6^-NS2YW:W:Y6[-KE[M=:W;MVK5FUZY=NW9%V+5KTZY=FW;M
+M"A%A4XA-(2R%"!$BQ(T;&C0H4Q8M6K0,/GSH$B$-!0H4\;!%`00(4!1`\5",
+MT#4"GBYXNG3!TZ4K@ZX,&7QD.)'A1(83&4YD`!CM1(9H&:*=R'#BA`]XNNC0
+M0>&$CJX[99:%"+%KSZ8]F_;LVA5AUZY=N];L6K-FS9HU:]:LV;5FS:XUNW:Y
+M<^=NTR9+EC0H&R7E%BM?*LP=6"5+EBQ9&V1M0+/AUZ\^_WWZ].G3P@@>3@``
+M`%CC;HV[->[6K'&WQIV[76O<K7&WQIV[70#<N5OC;HT[=VO<N5OCSAT`=^[<
+MN7.W:XV[7;O6[%KC;M<:=[MV[=JU:]>N")MV10BQ*\2N39LB;`H1(D*($#="
+MW`BA08.&>B>B1<N0(8,N772DH4`1+QZ@*(```8J'`L4(7?!TZ8('#QX\>/`R
+MZ,K@(\.)#!E.9#AQ(D.T#">B93B1X<2)##Y\9-!%APX=.M)$W`FS0,.>/2%V
+M`=RT:]>N7;MVK8FP9M>:-6LBK%D38<V:76MVK=FU9LT:=[MV;=H4PE*3(;?,
+MF&&EPIRY5;)D;=@D:\.&#7LV_/_Z!>P7,&`>\.#!`P#`&@``UNQ:X\X=@%WN
+MW+E;X\Z=.P#NUK@#X&Z-.P#N`+A;X\Z=.W?N`+@#X&Z-NS7NW*UQMV;7+G<1
+MW.U:LVO-KEV[=D78M6O7KEV;=FW:%2'$IDTA0H0($2)$B!`A-&C04*]>M"31
+M?/C0I8N.M"\HXL6+4B%*A7@HZ.B"ITL7/%VZ=.G*H,M'A@P9,IS(<"+#B0S1
+M,D0[D2':B6C1HITX<<*'+EU.Z#B1)JU6K1X+\/3YM2O$KCV[]NS:M2O"FC41
+MUD18LV;-FC5KUJS9M6;-KEUK`.YRM\N=NTV;T&@8(J02&#NL5)@[($O6A@T;
+M-OS:\*O_#S`/'CP`\X"G!1X\:P"L`;`&P!H`:]:X6[-F#0!W`-8`<`<`@+LU
+M[@``<`?`'0``[M8`6`/`W1IW[MRM<>=NC3MW`-RM<;?&W2YWN];LVK5KUZY=
+MNW9MVK4KPJ9=FW9MBK`I1(@0(="$T!#"DB5+]>I%BY8A0P8?NG31H4,G7KQX
+M4>+%BX=BA"X?NC+HR@`O`[P,&3)DR)#A1(83)TZ<B)8A6K0,)Z)E.)'A1(83
+M/GSHDB:-CC1I[&I98[&#A(<^?="@V;5KUZY=:W;MBK!FS9HU:]9$6+-FUYHU
+M:W:M6;-KS9I=[C9MVA3"R+97L+Z!`:/"G+E5LF1MV+!A`S`/_P"9T*)%BQ83
+M,<#PX%FP!L`:`&L`K'&WQMT:=^X`N`,`P!T``.X`N`,`P!T`=VL`N%L#P!T`
+M=VO<N5OC;HT[=VO<N5OC;HV[-;MVK7&WQIV[->YV[=JU:]>N7;LV1=BT:].N
+M39LV;0H1(D2($"$LA;!4KUZT:-%.9,@`3Y<N.G10H(@7+UX\%'1TZ<J@RT<&
+M71DRZ,J@*T.&#"<RG,AP(D.T#">BG8@6[42T$R=.G#CAPX>N.[KHB+CSS]JA
+M0RPF'`'6YP::/2$B[%H38<V:-6O6K%FS9LV:-6O6[%JS:\VN-;O6[-KESMVN
+M72&,[#"C#Q:D!*Q4J#!W8%6A0A[$,/^AY6O6K%FT:$TX@@</'@!K``!8`V`-
+M@#4`U@````"`.X``````````````U@```````````````&#-&@!KU@!8XV[-
+M&G=KW+ESM\:=NS7NUKA;XVZ7NUV[=FW:M6G7KETA=FW:%6)3B$TA0H2P%"*$
+M)4N6+*6+EB1#A@P^,NC2I8L.'10HXB%`08>.CPP^=&7(D"%#A@P9,F3(D.'$
+MB1,9HIV(%BU#M&@GHD4[<>*$CQ,$?/BX(^V.B%K6Z)%Y18N6F"-]?MU`LR?"
+MKC6[UNQ:L\;=FEUK=JW9M6;-FC5K=JU9XV[-FEWNW.W:A(;3CE=(8'U+P"J!
+MKUD):-'R!8W_UBQ<2$XAP35K%I,C+5K@60-@S1H`:P"L<;?&'0``[@``````
+M````````````````````````````````<`?`'4``:]RM<0=@C;LU[M:X6^-N
+MC;LU[M:XV[5KUZY=NW9MVK5IUZ9=FW9MVA1BTZ80FT)LVF3)4KUHT:*=R)#!
+M1P8?NG31H4,'`0H1='3IRN`C@X\,&71ER)`A0X8,)S)$RQ`M0[0,T:)%BQ8M
+MVHEH)TZ4.5'&AZX[NNZPJT6/C(M7N&C1$@.L3Y]?:/9$6+-KS9HU`-:L<;<&
+MP)HU[M:X6^-NS1IW:]RM<>?.W:Y=-X[02O`*"9($"9!T0-(!"1)<_TAF<4&B
+M3ITZ)+AFT?+0HDF+-6O6`%CC;HV[-0#6`%@#````````````````````````
+M``````````````````#6``"PQMT:`.[6N%OC#@``=P``N%OC;I>[79MV;=JU
+M">"N7;LV[=JT:].N$)LVA0BQ*<2F398L6:H7[42&##Y09<C@0Y<N.G3HT*&C
+M2U<&'QE\9,B0(4.&#!E.9#AQXD2T$QF21(L6+5JT:-%.1#MQXD29,C[*^+AS
+MAUTM:Q+6N7'A9A8M)D?P`,N"!E^$76MV`7`'P)T[=VO<N5OC;HV[->[6N%NS
+M:XV[7>[<N=OU2XRI6:^0()F%Y%0'258ZJ/_KH.[4J5/JU*G#A6L6DS\M;K18
+MLV;-FC5KW*U9`V"-NS7N`*P!````````````````````````````````````
+M`````'<`UK@#X`Z`.P#N``!8XVZ-.P"[W.W:M6M7A%V[-NW:M,O=IEV;=FW:
+M%6+7IA";0FS:9,E2O7K13IPX`3"#CPP^?/C0I4N7"%VZ=&7(D"%#A@P93F3(
+MD"'#B0S1,D2+%BU:M`S1HD6+%BW:"64GRIPH4\8'*@)W:EFC)\&%FU.XN-"B
+M)>9(BSZ_\.W9LVN-NS4`W*UQYVZ-.W<`W*UQMV:7.W=KUJQQY\Z=NUTWCO"9
+MY<8-$B2G.A10I$C_D:("!4YU>'1*W:E3LT`P:7&CQ8TU:P"L6;-FS1IW[M:L
+M<;=FC;LU````````````````````````````````````````6`/`W1H`[@``
+M<`<```!W`-RM<;=FE[M=FW9MVK5IUZY=FW;QV+5KTZY=N_;LV15BTZ9-FRQ9
+MJA<M6K0,)S*<R.##1P8?\'3ITI7!1P8?)S*<R)#A1(83&3)$`Y@A6K1H&:)%
+MBQ8M6I)HT:*=.%&F3)DR/LKX8,>N%CTR;F2<.H5KUBQ:$Y@<`0;LQIX]$7;M
+M`N#.G3MW[MRY`^`.@#L`[@"L<0?`'0!W[MRYBX"O!9]9+MS@PN7&2H$"_].F
+M32M@Y=2I4Z=.G<(UBQL38#>RW`"P9LV:76O<K=FUQMT:=VO<K7'GSAT`````
+M``````````````````````````````````#6N%L#8(T[`````'#GSIT[=^YV
+M[=JU:]>N3;MV;=KE;M,N=YMV;=H58M>N/;OV[-JTB8$E2_7J13MQXH2/$R<R
+M9,B009<N'SXRG,B0(<.)#"=.9(B6(=J))!FB18L6+5JT:-%.U#MQ0MF),B?*
+ME"E3AD"/'H<.`5SGQLTI7+APS:(%#=J1(\#Z9-D389<[=^X`N','````=^X`
+MN'/GSIV[->[6N'/GSIV["%E:\($RRX4;7*<>%?\H4*!`@0*/3IUZ=.K4*2[<
+M:!T!EN4&FEUKW*U9XV[-KC6[=NW:M<O=KEV[=KD#````````````````````
+M`````````````*QQMV;-&@!KW*U9X\Z=NS7N=NW:M6O7KDV[-NW:M6G7KEV;
+M=KG;Y&[3KDV[-D78%6'7KET\>/!@8$F#LF@G3IS(D"%#M`P9?&3PD2%#A@P9
+M3F2(=N)$M!,G,D3+$"U:M&C1E-53IJS>B6@GRI0I4Z9,&1\$>FP[9,H%+C>G
+MW)Q"@HL+"&[0F%PX<@38C1`1=KESY\Z=.P````(```"`.P#NW+ES!\`=``#N
+MW*UQ%Z$%'R@N7+AP<0K_UR,K!:P\.G7JU*E3N$[AF@6%R1%@-[*$6+-FS:XU
+MN];LVK5KUZY=NW;M<K?+W2YW[@"X`P!@#0```````.`.@#L```````#`'8`U
+M:]RM<;<&P!IW:];L<K?+W:Y=NS;M"K%KTYY-NW;MVK3+W:Y-[C;MXK%ITZX]
+MNW9MVL5C$P\&EBQI4*;LQ(D,)S)DR!#MQ(D3)TZ<R)`APXD3)Z*=.''B1+03
+MT:)%JQ>M7CUET>K54W;BQ(DR9<J4*4.@!PM3LW#A.N7FE)M3N+APX<8-&C0F
+M1X#U^15BDSMW[@```````````-RY<^?.'0!W````6./.W9H(+29`D3`+EPMD
+M_P#?G7JDSHJZ4^]P-<!U"A<N$-R@'0&6!<V>7;O6[%JS:]>:"+LB[(JP:]>N
+M7>YVN=NUR]T:=VO<K0$```````#<`7`'````=^[6K'&WQMT:=VO<K7&WQIV[
+M7>YV[=JT:]>F79LB;-H58M>F7;LVN=NU:]>F79MX;.+!8Q,/=YO<;=K$P)*E
+M>LKJG3AQ(D.T:!E.G#CAXX2/$QE.G#AQXL2):!FB98@6+5JT$]&415-V0EFT
+M:"?*E#E1IDP9'P0RL3`U"Q>N4Z=.G4*""Q<(;MR@08,&[<(18+_P15@#````
+M``#<`7`'P!T`````````8`V`76L``(AP8P(4*/Z0X?_"A0S7NU.G&IQJ@.L4
+MEP:XN,RBQ40,L%\A(NQ:LVO-+H"[(NS:M2O"K@B[=NW:M6M7!'>[W+G;Y<Z=
+MNS5K````X`Z`.P#NW`%PM\;=FEWNUNQ:LVO-+G=K=KG;M6O7KEV;-NT*L2O$
+MI@B;=FW:M6G7KDWN-NW:M(D'#P8\>/#@L6O7KDT\&%BR5*]>M&C1HF4X<>+$
+MB1,G3IPX<>+$B0S13B3)$"U:M&C13BB+%JU>M'K*3B@[4>9$F3)ERI0)$Z8*
+M!5-09N'"=<K-*5QN<('@PH4;-V[0H#'Y`ZP/O@AK``!PY\Z=.P#N````````
+M@#4`````X,X=@%T#)O"9!07_"C(NR)#A:H`+&2Y<#;B<XH(+%RUNT(X`0[-G
+MUZX(NR)$V+5GUYY=>_;L"A%AUZ9=NW;MVK5KUZY=NW:M<;?&'4!W[MRY<^<.
+M@#MW[G:Y6[-KUYI=NW:MV;7+781=FW9MVA0AQ*80(3;MV11BUZ9=FW9M<K=I
+MUZY-NS;Q8,"`!X]=NW9MBL"``0-E]92=B'8B6K1H)TZ4.7'BQ(D3)TY$.Q$M
+M0[0,2:)%BZ9,V8EH2:*=2!=-V8D3)\J4.5&F3)A152:P8`%%`JY3N$Z=.H6+
+M"RYNW$!P`\$-&BTF1X#]"K%KESMW[MRY`P```````````````````-Q%"-%"
+M#!\H_WS\S?+'I0879%R0<6F`JP$7+KA`@*#%Y`@P-!%V15BS:\^N/;MV[=FU
+M9].>/9OV;(JP:5.$7;MV[=JU:]>N7;O<N7/GSIT[=^[<[5JS:U>$-;MV[5JS
+M:]>N7;MV;8JP"6"$$)M"A-@5(D2($)M"[-JT:].N3;LV[=JT:=,F!CP8;-H4
+M(D*$39M",+!D*5V]:$FB)8D6K=Z):&5.G#AQXL2)$]$R1$L2+5JT:">414N2
+MA,"=$]%.E%FV;-FR,F7"A"$Q80(+"H<DK)/@!M<I7+APX9IE:A:46;-`T(+&
+MY`B>&R$B\'#GSIT[`````%@#``````#<N7.W*P2:%GB83/_@PP<*-W_^N'%!
+MQH4+%RY<<.'BP@4$-VC0+@!#$V+7KCT1=NW9M6?/KCTA]H38A69/B%TA=H78
+MM2?"GEU[=NW9M6O7KEWN=NW:M6O7KEV[=NW:M6O7K@B[(NS:$R'$KA";0FP*
+M$2)$B!`A-H78%6+3KA"[-NT*L2O$KA";-FT(`7!3B$TA-FT*L6G3)@8,ZD6+
+M=@+5B1,GHD6+%NW$B1/+3IPX$2U:M&@GHIU0%NU$-`'P4O"J=:),F67+RBQ;
+ML&!!%7(36%"P]N_*%4IDUKEQ<VH6+@D29LV:!0(*"&ZTF!P!=B/$IET\W+ES
+MYV[-FC5KW+ESQX.'.QXAFK3`0V[_`CD^T-IPXU8#1`TN-;AP:8"+"Q<N($!P
+MH\7D"+`L(39%V+5GUYY=>W;MV;,KQ)X-NT+L"A$BQ)Y->S;M0K,KQ*X0NW:Y
+MV[1KUZY=NR*XV[5KUZY=NR+LVK5KUYY-(4+L"K$K1(@0(4*$"!$B1(@0(7:%
+MV!5B5XA=(7:%V+4'S:80(4)LVK3)TJ80(2Q9JA<MF@]4!%#=(>`C6K0D)S*<
+M`)@AVHEHT4XH.Z%,F;)HT:(E$:`+#JE_/LHH6[:L28L%"\)4F<""PC\O11#(
+MJ59-E`%[9,A(.$1&@@0)$F;-H@5EPH1[>&Z$8+!I$X]=N]RYV^5NDSL>/'CP
+M"-$"#XDC_Q,F\.'#)P"W&B!J<*G!A1L7+KBX@``!`@04:-`N`+N!)L2>/;OV
+M[-FS9\^N#2'VA`B!9D.(#2'VA$`3(D2(/2$V[=D4(L2F79LV;=JU:5>$7;LB
+M[(JP:U>$/;OV[(JP*4*($"%"A`@1(D0(2VA";`JQ*<2F$+M"[`JQ*\0N-&@V
+MH;&TR9(E2Y88,*A73UD9'SX(H$*%RL>=.^S8W4&5`56&$P*B)3EQ0IDR9<JB
+M14LB0`"*8](0\!)1)LRR>_=(`%QPKTJ5'O\>R(FW90Z@?1BNX>#%BU<<2I0H
+M43)`A@R90X<.5>E1IHPR9>D86.+!@T>(39LV;>+ACL<F#2WN'?\AP8</'VA\
+MN/GSQXU+#1!<N'#CPH7++"ZTN-&"QN0"L#XW;NS9M6?/KCV[-NP)$6'#'C1[
+M0J`)$6+#GA`;]FS:$"+$AA![-NT)L2M$A$T10NP*$6%7A%V[=NW:M2O$KA`1
+M0H38%")$B!`A-(1`$R)$B$U[0H38%6)7B%TA-H78M(E!O7K13I0Y4:9,&1\$
+M[ISPX4,7J@P94*'*D,&'+EVZI+&3A@H5JA,GHBE;5N9$$@%.OLR;MX1.BCLG
+MRMQKT8($"1(D>OQ+(6?>G#ESYLR9$R4*!CG7Y!P[]N#!@P</`#YXD.S!@RN7
+MO'CQ(H*=#Q\GTO%@P&/3IDTA0FAHTF+_`0ERIJ#PX<,-"C<0_OSYXP8"!)=9
+MN)#@PC6+&Q]H3(X`Z].DSZX]N_;LV8-F3X@]:$*$V(,FQ!XT:$*$0!,B!)H0
+M(4)LVK,IQ*80(3:%"!%B4X1-NT+LVA5A5X1=>W9MBK`IQ*X0(4*$T!`B1`@-
+M(4)L"A%BTYY-(?9LVA-BCX9-Z5"Q*S(E!2H?!'R($(%`FBX?J.#!@T<-GBYX
+M&3+`TT5'%S543J2)T.4C6K1T29((</)EWCP'#CR)2.$C3)4%)"94J5+EWS$,
+M40#-F3-GSHH5<P`!F@-HQ;YY^[1<PW#MVK5KU^9=TX(%2YHTUXH4N<0N'0,&
+M(4*$V+3GQHT%_P!;D)A@"@H4*%#X0($"91:(6;C<N''C1AT2-[-FT8+&Y,*?
+M/GB:[-JS:\^N/7M";-@38L,>-"$VH$$3`@V:$&A"H`F!!DV($"%";-JS*<2>
+M37M"A-@58M>N"+MV1=BU*<*N$+M"A`@1(D2($"$TA`BQ*02:32$VA=BS:4^(
+M/2%";&(0S5B1:QB,"<APPH<N:2B6T-&E2Y<N>'1TT=$%#QX\>/"H.4'G!)V3
+M+\:,94B2)(.T(MC&8,/D8`0*$;4(+"!194*5*M8>8(BR#]"^*/M6[`.T8LZ*
+M.7,`K5BQ8L6*??NT:-&R;]\^+5JT8,&"!<NU&&J,)4G'8%.($/BRW/]H<8\$
+M"R@2H$"9-0L$%"BS7+A1I4X5,4G%B!%#,HL6+8`7C@`#U@)/A%U[=NW9LR$"
+MFA!H0J!!@R8$&C1HT*!!@P8-&C0A0H0(L2G$GDTA-H78%&)3A!"[0NP*L2O$
+MK@B[0NP*$2+$IA`A0F@($2)$"$LA0FP*L6E/B$U[0NQ"LR>$I23LKEW#MN0,
+MM0P9,M"AL\0!/%WPX-%Q(DT$/%WPX,&#-V*$$Q1+1BS!)D<.G2\($,S#-L89
+MIC&8EHR@(R+,LBI5PO2H]:!:%$"``$6)$B5*E"B`5LR9LV+%OA7[]NW;IV6?
+MEGU:M&C1LD^+EGU:L&BY=DV-L1,,&(1H<B/_Q(T%)$Q)<./FU:Q9;E[->N6&
+MRH<?Y9244Y*H'#%5KV@Q87+A"#!@>"+LVK5GUYX((?;L0;,'S1XT:'ZA08,&
+M#4`T:&Z@08,&38@0(4*$"+$G1(@]F_:$V!5B5XA=NW9MBK`IPJX0$4*$"!$B
+M1(@0ED)H"!$B1(A-(3:%V+-I3X@]:#;5\V'L&C9LF#Q1HY9!0(81(]#!@P</
+M'CQ==.CH@@</'K41=%",0!$O"B!`%9R-B8=!#C9,S@`Y&(/)@2=X__X1"!.F
+MS)T'Q^1$`81MR1(4"/)AB`((T!Q`<U8`6@%HW[Y]^[3LV[=OW[Y]^_9IV:=%
+MBQ8LUV)H4^.CGJ40_R%N-"'!0H(;*E20N%E$C)BJ11\2*4GD:IB)1,,2E2N&
+M9!8T)D>.`,,#;%>$7;OV[-JS:P^:/6C0H$&#!@T:-&A^H;F!!HT&-"'0A`@1
+M(D2($"%";`H18E.(/9OV;-JS"^">71%"A-@5(D2($"$TA`@1(D2($)9";`JQ
+M:5>(72$BA-@3(D0Z=L:<H$.'SA,U>!DR9(`'+T,&>`+@P7-"!QX=7?`RC*!#
+MA\X(!V,4;-&Q9<L69V.<.1NSQ9DS!Y@<>'*2(D^M,F7N_#N&(5Z4*-A0.*"#
+M0DZ4*"L``9H#"-"^%2M6K-BW;]^^?5JT:-FG99^6?5JT8,&2!DN::J"\G/^H
+MIVQ!%5/K`GTH5HQ8L7*3RDU*-,S$IRY=/IGH8L)$HF*J7M%BPN3"D2-'UNQ9
+MLV?7KCV[]NS:@V8/&C1HT*"Y@>;&#30W;MRX@>:&!C0:T*`)$2)$B!![-NW9
+MM&?3GEV;(FR*L&M7B!`A0H0($4)#"`TA+(4(L2G$IA`A=H6(`#!"B`A[+$7S
+M4H0:-6K4J%'3I4L7/!_PJ&6`AXH:/#IT=,&#!P\>'6ET/(UP,,;9EBU;MFS9
+M4F%,A3'.QHQQ,,:!`SHC'OR[<R?%,3E1H@#"Y@#%B!&>1LP#!&@?H'U1`&D!
+MM`_0OA7[]NW;MV_?/BW[M&C!@D7+/BQITJ1)DZW_6K):818<6O>AW*1$B1(E
+M2I3(A(E/X,"]`#<#'+@NX$PD*D?LU2PF3)B(87)DUYI=N_;LVK,+S9X](?:@
+M0?/KUPTT-]#<N'$##1HT:&3UD84&S8T0(="$"+$IQ*X0NS;M"K$KQ*80>T+L
+MVK,I1(@0(4*$"!$B1(@0FS9MVA0"S:X]>_9$"*'AGS1J\.!1HP8/'CQ=NN#!
+M@T>-&K4,\'2A`JA+%SQX\$;0H4/'TP@'#AR,<59ARY8M%;94&#-FC`,'F!QX
+M\D0'`0H$QXYAB%(!4)1X\9R,@.<$'H(O\>(!`@1H7Y0H4;3LV[=/BQ8M^_;M
+MTZ(%BQ8L6K!<TX(E39I]_UBR3<DSZA"90,-,?/KTZ=,G<.#`@0/WY@V0-V_>
+M@`/7I8N)1,46O:)%:P<46K36[%JS:]>N77MV[=JS)\0O-&ANH/F%Y@::&S=N
+MW.C3QPBG0H7ZH`D1(@2:$+LVA-BU:<^F/;MV[=JU:\^F/7OVA`@1(D0(#2%"
+MA`@18M.F39OV[-FS)\0F#67NP,M`+0.U#/`RP(-'9\0(:B/@P8,'#YXN.O!T
+MP1M!APZ=$9X<.'#@P,&8,6,J;-E2H<(8!P[&`!SCP(&#$2-0H$`0!4,40("B
+MQ(N'8L0(>/#@T9&&(!Z@*%&B1(FR+TJ4*/OV:=&R;]\^+5JT:,&B!<NU-%BP
+M:/_1HF7>E"M-#E&)-,P"N!?@P($#!PX<."!O@``!`@3(FQEOP'4QD8C8HE>S
+M9KV2(&&-NS6[UNS9M6O/GA![]J#9@P;-#30W;MRX<>/&C4*<ZM1A4X>3$5EH
+M-H38L"G$KCV[]NP*L6O7KA"[]NP)L0M-B!`A-(0($2)$A!";0FS:M6L7FDV;
+M&*2+Y@,>-0'PX&40``\>/#JZ1HP8,0(>/'CPX,&#!X\.-3K24(SPY,"!`P=C
+M'(P94\'9E@I;G(UQX&#,F#'Q'#@8@<(!"A11HD2)$@4;"A0C1L"#!P\>'03Q
+M`,8#%"5*E'U1M$39IT6+EGU:M&#1@D6+%BU8L&!)@T7_BQ8L\[Z`HJ2!A8%(
+M7=Z\`?+F#;@WX-X`>0,$"!`@0-X`>?/F#;@7P\H16[3(#3$WB]RM6;-KS:Y=
+MN_;LVK5G3XA?:-#<0'/CQHT;?=#TX52'EADS0H34&6*DD*P->S9LVK!KTYY=
+M(?;LVA-BSZ8](4*$"!$BA(80(4)$"!%ASZX0>W:%V,0C71)4J.!1@Z<+'CQX
+M&>#!@T=GQ`@4(^B,&`%O!+P1\$:,H(,"A2=/#APX<S!FS!AG%;9LV5)AC#,'
+M#APXPQ3/@0,'*#R-<(!"CIQX8QR@6#("W@AX(ZC108$B7I0H&`!%B:)%R[Y]
+M^_9IT8)%"Q8L6K1HP:(%"Q8L_P"U:-&R)%LJ49:6T6N$:,8;($"`O'GSYLT;
+M($"```$"!`B0-T#>S`!G(M&/#Q^(E?M!;-<:=VO<K=FU:]>>/;O0[`FQ!PV:
+M&S=N-+FAX881,1S,P((%"Y89%5*$<3(B2Q::/;MV[=JU:]>>77MVA8@0(D2(
+M$"%"A`@1(D2($)MV[=FS:T^(39;JH4*%"AX\7?!TP8,'#QZ\$2-&C'`P`L6(
+M$=1&C!@Q8L0(%",\>7+@P-F8,6/&5*C@;$N%+16<C7&`R1FF,0[&.$`1#P4*
+M!RA0R$$Q@LZ($2-&P!LQ8L0(%"CBQ8N"`5`40!@P1-&B1<L^+5JP:-&"10L6
+M+%JT8/_!@F7>O&NI.J4JD^Z9*$3@W@`!`N0-$"!`@``!`@0($(!`W@!Y\P;(
+MFQF?AB52DJA5(B62=NW:M6O-KC6[(NS:M2?"GCTAT*"YT4?#C1M]^GBH8P;6
+M-TB,OCVQ8\>,$#9L.!4JA&;#GCV[]NS:M2M$A!`A0H0($>)&B!`A0H38M&?7
+MGC41]KC;9$F9#U34X,&#IPL>/%TCX,$;,6($'0<.'(P8,<+3B!&>/*%`@>F,
+M`P>8QCAS5J&"LPI;*FS94F&,,P<.QF`:@\F!@S$H\LE!@8(."A0C1HP8,6+$
+MB!%TZ(P8X>!+/#E1HD2)$@6#%BU:]FG9AT4+%BQ:L&#!@@7_"Q8L6K!@24.*
+M%)PI=_Z):M;E#1`@0(```0($"!`@0(```0($")`W;]Z`Z^+-A#<+GUZX:K5G
+MUZY=NW;MVK5K#\!=NT+L"8$&S8T036XTN:&ACY$Z9F`Q&A=N'"-&W\#`@N5+
+M"(<AJ_K(0K-APYX-$7:%B!`B1(@0(4*@08-FPX8-:#;\^K7AUYX0RLJ4.9$!
+M%3Q=\'3I@@</GJ<1(QPX<.!@B0,'#M`Y<.#``0H'#AR,&>/`684*SBILV;)E
+MRY8*%9PY<.#`@0,'#C`Y<.!`CIQ\"%#0H3-BQ(@1U$:,&$$'!1T4*.9]F3<O
+M7I0H&#!@P*!%BQ8M6K!@T8(%"Q8L_UC28,&B!0N6>6GF7<-0Y%\>&(C>O`$"
+M!`@0($"``'D#!`@0($#>O'GS!EP7$Y^ZO)@Q0],G5R'V1-BU:\VN7;MV[=JS
+M*T2$$"%":+BAH8^&/K(XU3'SK4.X<.'"C1LW#B"C)]^^F?$E1IB'0H4*;=BP
+M(42$$"'PA<"7)<2O7WLV;"CD08PP,9P6-%%6IH>/#!ETC=`U0A>=$=1&C!CA
+MR8&#,0X<.,"TQ($#!P[B.<#D8,P8!V.<5=A28<N6+5NV;*DP9LP8!PX<.'#@
+MP($#!PXPR8EQ3`Z=$2-&P(,W@MJ($2/H.$#Q!0$*%%_FQ8N"`0,&#!BT:-&B
+M10L6+%BP7/_#D@:+%BPQL*31@@4+%@S7O%P9A&C&FS=`@``!`@0($"!`W@!Y
+M`P3(FS?@NG3YY&C&&R!`@/#[%&)/B#V[(NS:M6O7KEV[0NP)@0;-C1L:^C1I
+MTL<(&U^P((T+%R[<N7#APH73P^@;+#-2V!PHM,I((5E[-NT)L2=$%C1[]FSX
+M!="#&'-,.`C9-FH4@1P$[F3(``^>+G@C=(W0-<+3"$\.'#@8XV#,$@=C'(P9
+M,R;>F#'Q\N'(%\59A0I;MFS9LF5+A0K.G&'"Y,"!`P<.'#APX&",@W@QY*"@
+M,P+>B!$C1HP8@<(!"@1R$(R@\R5>O"@8,&#`H`4+%BU8M&#!@@7_"Y8T6-)@
+MP8(E#9886*)HP8#EWS-1_1"]>0,$"!`@0(```?(&"!`@;X"\`=?%Q#`3,]X`
+M`0($"+]/(?:$V!4BPJX(NW;MVK5GUZ80(4*@T7"CCX8F?0H-X0`&4KAPY\Z%
+M.W?NG(UPX1@QLL.*@S!A!PYP6E5HPP8T>]"@0;,!31\/;#CX,E.)1JAG[-B)
+MD*9K!#QX\*C!@P</GB=XGCPY`.A@S)@Q8["-P88-6Q1L\<9$B3=FS)@H^:)4
+M<+9ERY8M6[94J#!FC#,'#D8X&.'`@0-,#APX0"%'CAP'U$:,&#%BQ(@1(^B@
+M0"`'@30Z*.3,DR,G'P8,&/)AP8(%"Q8L_UBP8,&2!@L6+%@P8(F1#P,6+'*\
+M]*`T"%$7<$"```$"!`@0(&^```'R!LB;-XX<#1LV8P80($"`:/H4(D2(/2%V
+MA=BU*\*N7;M"[`D1`LT--!IN:.C3Q`@G#@D@00H7[MRY<^?.G3MG(]RX)V#L
+MJ)`B3)BP548*;=BS:P\:-&B:&!E%@T8O08*273(FK<B7$2-&P(,'#QZ\$2-&
+MC'`PPH&#>/'BC1DSQH&S,?&B1!D#R($S!Y@P.8@2!5"%+5NV`-RR94N%"L[&
+M8,+DP($#!PX<.!CC`).#,0XPY$/A:<2($2-&>!KA8`0*%'(0H*`C+1Z">!CD
+MR)DG)U\^+%BP8/_1@D4+%BQIL&#!$@-+OA@Q\J4YEJ)'&0KVFB$"!P0($"!`
+M@``!`@3(&R!`@`!YT\6$B6$S9@`!`@3(FQ=HT*`)$2%$A!`1=NV*L&O7GETA
+M0H2X<4,#FB9]"G'BP`H2I''APH4+=^[<N7/APHT;]\2.'16WA`D[<*#0A@T;
+M-LG2H*Q,CV>7!(&ZI&;*%R?HL,U;XHG.B!'PJ(V@!F_$"`<H',1#,6;,F#&8
+M,&%R,&;,F#%C,&$:$V^,`TQ1,$2IL&7+EBU;*CASYL`9)F<.'#AP$"_>F'AC
+MY,1S$"^?G'@.`(YP,&*$@Q&>1M"A@P`!'3IT4*!`@4`.@GE?\N5+DP;_BQ8L
+M6K!@P8(%2XPT:=*DB9$FVX,4_\)H"-,KDJ$N;X```0($"!`@0(```0($")`W
+M;[HX,A$+"!`@0(#P>W$#S0TT:$*$"+$KQ*9=(7:%V+0A!)H0&M`TT="DD!$V
+MOF!!&A<NW+EPY\+9L!$N7+AQC,"`L6-'A11AP@X4*B1+@[(R!-A-*7+MVK5K
+M7Y:@0X=MWKPQ#E#0&3%BQ(@1#E"@0!$OWA@'8QQ@<H!IS)@Q8\:,<8`)DP-,
+M#APX<#`F"H8H%;9LV5*APAAGSC"-P32FPIAX8\:@&.-`3@P'#N3$D^/`P0@'
+M(T:,&#%B!!T4=.C0H8,"!0($<KX@F'<L1IHT_P#38,"B!0L6+%BPI$F3)DV,
+M&-FJ_:M%8=0-/(<"&>KRY@T0($"```$"!`@0($"```$"9(8W;S-F``$"!,B,
+M%WUNW$"#!DV($"%VA8BP:<^F/2%"W+@1XD:(&QKZ>*CCZQND<>'"A0L7+ERX
+M<.'"C1LW;APC,&#LL%+!@4,=8:-&E6%GK`B">=BP8</V9<D2=//F85OB``4*
+M.G3HT*&#`@6*>"@<.'#@P-F8,6/&C!DSQH&S,9C&C'%PQ@$*!PX<5``4!5"%
+M+5N<.<.$:<P80!4J5*@P9HP#!PXPX)CG`,62?"A0.!CA8`2*$2-&C*!#A\Z(
+M$73HH$"```$"!-=BI/_!D08+%BQ8L&!)@Z,;CFLQ8F3K%B>/-0H3;AAAL<X0
+M(H#@@``!`@0($"!`@``!`@0($"!`WG1Q-`,($"!`@+SA=^-&GQLW0J!!$R+$
+MKA"[0NQ"LP<-FALA-#2YH:&/$3:^$D""%&Y<N'#A;(0+%VY<N''CQHT;QP@2
+MF`0)6)D1LBU3#FE?YF&+@@U;O"\HZ-!!(2?>&`<.QC@8,6+$B!$C1CCPY`"3
+M`V>8'(P9XR">@S%CQCC`-,:!`P<.'#CP-,*!@PJ`HE2HL,49)F=CQHP!5*'"
+ME@K.G&'"Y,D!#CD.ECB0,R^>`P>>'(P8,6($G1$C1HP8,8(.'3H(4"#X$N/_
+M6!H<:;!@P9(&2YILO.!4.Y8M39ILI%+9(T/B1@L2O0R!`_<&"!`@0(```0($
+M"!`@0(```0)DQ@P@0(```0($"$`@39K<T(#F!AHT(4*$V+,IQ*8]:-"@"7'C
+MA@8T-_KTJ>/K&R1(X\:-"Q<N7+APX<*-&Q=N7+AQXR!!@O1-W[I>SW(4^3(/
+M&R!`@.+%0X&"#IT1<N*-P18EWA@'*%"@0(%BA"=/GAQ@<C!F#*8Q\<:,<3!F
+MS!A,#C!A<N!@A`,4(QR,&5.A`B!`&*)$P09H3`5G6[9LJ5!AS!@'F#S%R+<$
+MA0,Y<N(Y\.1@Q(@1(T;0&3$"WH@1(ZC1H2--FC04_\>.I<&1)D8,+&G29,L&
+MAU0<'-VZI;E&JE,D*D=^];E'QE"7+D"```$"!`@0($"```$"!`@0($"`S``"
+M!`@0($"``.G3I,^-)C=NW$`3`DV($&A"A$"#YL:-&QIN-&DB"Z"1.KX20((T
+M;MRX<>/&A0LW;EPX/>/"Z0DW;APD2'I*Y;HD[0LV;-BPQ8N';4P\%'10>)(3
+M)5X40-BP+7&`@@X*%"A&C!CA:80#3Y@P.1L3;XRS,6/&C'&`R8$G3PXP.7"`
+M"9,#3`Z<C1E3H4*%"LZV.-NR9<L69Q7&.'#@R9.<?"/DH(LG9QX*!PY&.'`P
+M8L2($2-&C!@!;\0(.G3HT/^A$P/'L30X8F3#D29-FF/9TN#`T0T.EC39.@6:
+M16Y`GPGK(B%Z\P8($"!`@``!`D23)DU`@``!`@0($"!`@``!`@0(D"9]FC3I
+MH^&&AA`W0J`)$0)-"#0A;H2X<>/&C29]C(@QDP`,I''CQHT;-VY<N'%ZQHTK
+M-6[<N'#CQHG3!Y#0)6-?L`$"!`@;-A38L*%P@`*%)SGQL`$:,V;,$@<H'-"A
+M@X#.B!$C/'ER@&G,F#%CQHP9,V:,,P<.'#@8X6"$`P>8'#APX,`3)@>8G#ES
+MYLR9,V=;G&T9XVS,&`=C/*%P$$]./!3YY,A!@<*!@Q$.1HP8,8+."%TCX(T8
+M,6+_!!T4QW#DPX'C6)INW;JEB2$G!@XXW;IAP7(LU2)NY`:TF$#%#[@W0(``
+M`0($"!`@0#1IT@0$"!`@0(#,`#)CQHP90(``:=*D29\F-YKTT7`#C880-T*$
+M0',CQ(TF&FYHZ-/$"!M?"6!!`O/DR;AQX\:%&S=N'*1QC)X\@01)'Z%<H(HX
+MP88-VQALV+!AP^9@"0HZ(T;DBP<(&[8QF)8X`/AEA"<4*.B,&$%MA`,'F,:,
+M`>1@C`-G8\:,<>#)TPA/(T9X.A.O0CP'#D8X\.3`@3-GSIPY<^;,V9@QF!PX
+M<.#`DQP'\>)%R2<'@YQX*!R,<#!BQ(@1\$;H&@%O!#PZ__#HT*$CY]@Q'#CR
+M'<,A)U^:;#%BX,"!`P<&+-=248%V`1B>"8&\O0$"!`@0($"```&B29,F39J`
+M``$"!`B0&3-FS``"!`B0)DV:-&G2I(^&&S<TW$!S0\,--&AN-+EQH\F-)GTX
+MB1%B)L$W,)#`0`(S#M*X<1T@0?KV!`P8.Y4J"5)3Y,N2>?'B88N'#1L@;$N6
+MH$#AR4D^;/&P81NSQ`$*%",\C4!!9P2\$2,<.!@S)EZ%,9B<C1DSQD$\!R-&
+M`!PQ8L0(!U&BQ'/@P,$(!PX<8'*`R8$#3)@<.'#@P,$(%`X<Q(CG`%.\?#AP
+MQ,@G)YXG3PX\C8`W8@2\$?#@P?^#!V\$'3H(CAW#@>/8L7Q?CJ5)DP8'CFXX
+MTD3!<"V5!"9__ASAH\K1&R!`@``!`@0($$V:;-FR98L?/R`S@,R8$<N1HUAO
+M@`!I@J=)DSY-FO31T.>&AAL:^MRX<>/&#0U-FMS0T,=('0Y"$L""!0L,&$A@
+M($&"!`D,K`0)6)D1<NN9FB+S5F##-F]>O'E1``&:AVW)EQ$CZ,B)%P_;&&PH
+M4*!P,&+$B!$C1HP8X<"!@S%C*HP9,V:,,V<5G&'"Y&#$"$^>',0;4V',&`>>
+M1CAP,,(!)@<.'#A`X<"3IQ$.`(YPX,!!O'B8*HQQ-F9,/#ER,,B1XX#.B!$C
+M=(W0!0__W@AX(^#1H4/GV#$<.(X=.Y:F6YIC,=+`Z88CGY9]UWB1X4..W`13
+M'RR\`0($"!`@0#1ILF4K2)`@02Q8L!`+R(P9CAPYZC)CQHPF3?HT:7*C29,^
+M&OIHN-&DCX8^&FXTN7&C29,^30IQJB/$EYD$=F#!`@,&#!@P"1+X\N7+'!LI
+MF7(4P;8"T#Y`\5#,BS<O"J!Y*.B@<$(-Q1<4V,9@0X$"!8H1(SR-&#%BQ(@1
+M#APX&#-F3(4*SK94J%"APAA,F,8XP(1I":`M%9R-P>1@A(,1#APX&!,O7CP4
+M#D8X&#'"P8@1#C#%<Q;%F3-,#AR,<>#`@2<4*$;`&P$/'CQX_P#AZ8*G"]X(
+M70B.'3MV[%B:--VZX8@1`T<W'&GR[=MW#<XZ*-SX!)#P@\@,($"```&BR=:G
+M(-.F%9@V;5HK6Q9BS9C1I8NW+HX<>6O2I$F3)DV:-&ERH\D-#7TT]+G11T.?
+M)DV:W&C2QX@1,4,X"!%BQ@PK.PGL)$A@AQ4'%6S,"1M%@-T7;"OF[`,414Z\
+M>5$`[8N'`H6T$?`0H'#@`),#!RCHT!DQ8L2($2-&C'`PPL&8,6.<5=BR9<N6
+M"H"V``($"!`@0/L`S:FPI8*S,0X<.'#@P,&8>&/&Q(N'@LZ($0Y&.'#@(%X4
+M9\XJC!GC8(R#,0X<C$"!@LX(:O"HP?^#-P(>/'CP=(T0D>(8#AS9<'3+A@-'
+M&AS=NJ6)@47+/H`8'MASX6\6,A>JE,2*I8D?/UM!6BE29*5`@0+!@@5KU<J;
+M!0M=')E`-&R8GR9-;C1ITD?#C29-FC2YT:1)DSX:;C1ITJ1)DR9-^ACAQ&G(
+M#@X<A)@Q8\>.'3M".`B1(H7-J%$^G'R)L@\0($!1XL6;ART*MB5?4-"!-P+!
+M"`>>/'ER@`+%B!$C'(P8,6+$"$\.'#@8,\99A0H5`%78LF7+EBU;MFS9,D>'
+M#AU;MCAS@,F!`P=CQD2I,*;"F'AR4#APX,F3`TP.XHT9<Z;"&$P.,#EPX,"3
+M`SERZ-`9,6+_Q`AX\.C`&P$/'CPZ"(Y5PX&C6[=N<+JE2=.M&XX8&/:MF%<M
+MD!M<R*"X4,5,21`BK8(QLZ).W:E'IQY9L5*`&<!@TUIY<]0%D0E#?OQ$:M*D
+M29,;39HTN:'AAH8F39HTT="G29,F39HTN='D1I-"1CAQJL.&`P<5K.S8L6/G
+MEI!;MVZ-*H/*"0ILV`!%B0((4!1`4;#-6S+"R0AX(^@@&.$`$R84=$:,&#%B
+MQ`@'(QPX<.!@#"9GSBI4J%!ARY8M.K9LT:%#QY8Y.G3HV*+#F3-GF#`Y&U.A
+M0H4*%9Q5<.#`0;XSGN)APC0FRAAGSL94B.?``29/#AR,.'8,!;41__"HC:!&
+MC1JU$?!&P(-')P4.'-VZ=8/3K5NW;CC2I(FA9=^^>6KLN7#ASY\$%U14N7#A
+M`A<7+KB0X3KUZ)$5*U:L,"/VXX<2;R8,^?%3[,.-)C>:-&G2I(^&&TWZ-+G1
+M!&"?)DV:-&G2I$F3)DV:-#%BQ`@G3L+82)%RRXX=&G9HW*(A[U8.5-3@C4`Q
+M!E`40(```8J";1ZV)2-&P(,'C\Z7>-@<.$"!8@2U$0Y&.!@QPL$(!PXPC1DS
+MID*%"ELJ;-FR9<N6+5NV;-&A0X<.'16V.%/@S)DS0(`J5-BR94N%,6,<Q(N'
+MR<$9!_'BC7&`:<P8!PXPC7`P`L6(&')0>/\:,<+3"$^>/(WP1(T:M1%T$!RK
+MU@U.-SC=NG7#T0U'FA@8]NV+<HR,!'_^H/B3X$*""S[<N''CYH\+LG<-'CUZ
+M9,6*%2LRF/U08LC0I$C%`C5IHJ&)AAM-FC31T$1#DR8:FC1IHJ%)DR9-FC1I
+M8J1)GR9&C!CA)$R8%!65[%2J!)"&/'F"+DU!AV[$"!0HXD6I$`40H"C8L*$8
+M,0(>/'CP1J!`,6;,F'AR4%`;,6*$@Q$.1CAP@`G3F`I1*E08,\:9LRU;MFS9
+MLD7'%ATZ=.C0L040($!1QCBKL&7.E@I;*E1P%F_,&!Q1,&%R$"_>&`=C'#AP
+MX&G$"`<C'(PX)L?_@2<'*!PXB.<`A0,'(T:,&$$'034<W>#`Z0:G6[=N:=+$
+MP*)EW[XH*0[QX<.'#Q\^4/CP(=<&6@!NR)#A>O?HT:-'CQY9D2'#S8</Y?Q$
+M*K9HG88F3?HT::*AB88;36XT:=*DB88F39HT:=*D29,F39H8:=*DB1$CG(1)
+MN<7J5J5>\@2!`C6ER)=X2U"@0($B7A1`@*(`FK?$B1-X(^#!`PAO!(HE#L;$
+MBR='SH@1(T:,0.'`@0-,#L:,J1"E@K,Q8\94<.;,V98MSK9LF:-#AXX5SK9@
+MB($!$"!G6[8`VE+!F3-,8S!%P8$A7KPQ8\8X<.``DR=/(SR-&#%BA`,Y_W(<
+M>'(0;PRV>(``Q4/AP(&G$2.D'<,!!PZ<;MVZ=>O6+4T,+%KV[8OBI0HY<N3(
+M\>'#AP\?/@&X<4&&[%2#!J<>/7KTZ)&,1S)<N/CP(5*Q0.)>-;FAH8F&&TUN
+M--%P0T.3)C>:-&FBH4F3)DV:-&G2I$F3)D::&#%B9(@P*4*$5.K5KITV;=>6
+M:-F'(1X*%"CB10$4)4J4>"A&T!D!#QZU$2-&Q,,6!="8>/E0.!CA:<0(!R,<
+M8'(PID*4"A6<`73FS%F%"ELJ;'&V9<N6.7/FK``T9E^,-%BT[*L`J$(%;&,P
+M><+DR4&^?/GBQ8OGP($#!PX<>!H!#]Z($=1&C/^0$\\!IGB`QHRI4&%,A3%C
+M'(P8,4+:L6-PX,#IU@U.MVYITL3`$F7%/@PB%ARY<($<'SZF^$#QQP49LG>G
+MWN%Z]^[1HT>/'CUZ),.%&U4__`PK1DQ?$PU-;C1ITD3#C29-FMS0T*2)AB9-
+MFC1ITJ1)DR9-FC1ITF29D65&C`B3(D3(K5SMM&G+=FW?G'U1HJ!`@0)%O"A1
+MHD2)MX3."'C4X,&#-\)!E"B`QHR)EP^''`<C/#D8X<`!IC%C*E1PYFQ+!4!;
+M`&W9`F@.H"V`5@":LV(?(`PQTF#!$`7;/FQC`&+"-&+$B!&>Y,20(\>!`SDH
+M''ARX,#!B!'PX(T806W_!`H4*!R,&0/(684M6[94&#-F#`I/GNC(.08'#IQN
+M<+IUZY8F#18,6O;MPR!B00MR;?BP@`)%@C]<R'"]:X#L78-3[]X]:O#HT:-'
+MIUS(^.!GF(E)Q!8UN=%$PPT--YHTT7"C29,F39HTT="D29,F39JT:-*D21,\
+M39HL,V+$B#`A0F[=ZI6'5[<T6O;-`;0/$+8E*.+%PX8M7CP4=$:,@`</'KP1
+M(U",&>/,V1@'<F+@0.!@A`,'#APX&#.FPAAG6RIL`31GSI8Y.G3,F3-GSIPY
+M*_;M2Y,&"P8M49SM6X+I##5X\."-&"'G&`H4(T;(0>%@A(,1(T;`@P=/%SQJ
+M_P!'((@7;PRF"A4J5-BR9<N6"F/B.7#@:02"8]U(P>D&IQN<-&G28,&@9=\^
+M#-):_"%'#@H4"5!<N'"!#-D[7.^0O4/V[M2[!@T>/7KWSH6,'TJ&#9M$[)N&
+M&QJ:-&G21$.3&QJ::&C21$.3)AJ:-&G2I,FR%DT6-%G6I,FR94:,U-DA1`B-
+M7NWR=$N3+\J<%?OV`9H7;\F2>/&PH4#A@,X(>/#@C1B!`H6#,<[&C''F0`Z.
+M?"@<.!B!R<&8,6/&;*D`:,N<+3JVZ-"A0X<.!7,4S)FS0DN:&%@P8,"`;<D2
+M=.BH48/G(P,\>`A&T/'D"86<>9X<C/#DP`$\>-1&4/^C-D(.@GACQHRIL&7+
+MEBU;ME2HX,P!"D\CI!WK!H<4'(!PX'1+DR8?EGE:`*V0HZM)BR-MH/CSY\*%
+MBW>G3B%K@`Q9`USO&KQK\*C!HT>/3LE@]D-)HG(=D#1ITJ2)AAM-FC1ITJ1)
+MDR9-FC31T*1)DR9-6C1ILJP)GB;+FBPSLDQ8'0YF$ICIU2Z/-APX8D2)`@A0
+ME'F`L&$;@\W!$@<C1L"#-P(>'3H.'(P9,V;,F#$.QHR1DP_%"`<H'&"*XJQ"
+MA2U1MFS1L46'CBU;="B8HV".,P58YF")D2\?ABC8'"P9,0*>@`P9X,&C1F>$
+MIQ'HXLE!@,*!)P>81HP808W_VID1*.+)B3?&F;,*6RILV5)A2X4*8\8X\#1B
+M1`H<I."0@M,M31HL6+!H6;$/FYH3&@:0:^,/F0M_R-XA0X8,&4!DR)`A0X:K
+MP;L&#1XU>/3ND0QUS)B5ZX"$5I,F&IHTT=!$0Q,-39HT:=)$PXTF39HT:=*D
+M29,639HT6=;$R+)E1CA)\64F@;@2O00]@(,C1@P,43!HB0(($+8Q8U`XH#-B
+M!#QX\."-6#)BB0,'F!PX&#/&P9@H<N(Y<.#`P9@H%2H`F@-HBXXM6[9LV;)E
+MBXXM"E8H6+'/69HT^?)AF+?$P0@Z=.`)$"!`@(`1"+Z,0+<D'XIX*$8X\.3`
+MP8@1_YX\>7(0+UZ\>`Z<5:BPI<*6"A6V;'%684P\3R-&I*A&"@XI.-W2I,&"
+M1<L^;/OFB8AV8P"Y`/[\U4"&#!DR9`V0(4.&#!FR!N\:-&C0H,&[=^^0G3JE
+M#M<L,1Z:-&G2!&"3)DV:-&G21$,3#4V:-&G2I$F3)DWP-&G2Q$@3(PN,+#,R
+MA`T'5@G`P"K1*U<>7G!PQ,`0)8J6*%$`81NSQ`&*$71&P(,'CPZ=$9X<.,`T
+M9HR#,6/&C!D33TX\!Y[BQ8M2H0(@0%'F;%&P9<N6+3HJ.*NPQ9DS+("PQ,B'
+M`4.4,0Z6C!A!!QXU`0($"*!&9P0Z3"AB.$#AP($#!_'BQ?\;$R]>E#%CHL0;
+M,\:9LPI;*FRIL*7"E@H5QCCP-&)$BFJIX,"!TRT-%BQ8M.S;IZ4(*F4W6I!K
+MXZ^&/V3(D"%#Q@49,F3(D"%#UJ!!@P8-'C5X]$@&+EP@:!WY]:M)DR9-FC1I
+MTJ1)DR9-FC1ITJ1)DV4MFC3ITZ2)$3Q&."W@!'#(D"%U.+!*8`<,F!(E>B7+
+MPPL.CAA8,$31$@70F#%CECB@,X(./%TCZ""0YLG3"`<.'(P9XV#,&&=C\L5S
+MX"#>F"A;*LP!A`$#H`H**FRIX*Q"!07.G`&*D@\#MGC8L(T9X\"!@Q$CZ"!`
+M\&4$-4\(YLG)AR'?"`<H4*"(%R__'B!L%0!5&!,%PY@QF,94J%!A2X4M%;9L
+MJ>!L3+P1U.`A@$.*%)QNW=)@P:)EW[Y]UZY%J]?D#[D`_OS5X((,&;(:R)#5
+MX%(#&3(N#;@T:-"@P:-'[]ZYP`4%FH=?OYHTT="D29,F39HT:=*D29,F330T
+M:=*D29,F?8P8&3*D3IU1;.IPX.#+%RLP8,`\J23O6:@K#W#@B!$#0Q1`@,:,
+M`3AF"0H4=$;`&X$*'H(4"$:,\.0`Q1@'8\8X&S,F2KQX\<8X&^-L2P5`&&+D
+MP^#,F;,H%9PYP^;,01ILF#"=68)M#"9LV#"A<_!%3HP8,6(XD78L!HXT<APX
+M<(`BG@,'_PZ<5=A28<N6+14P.!OCP-F8"A4J;-E284N%+17&C!GA:80T.*1(
+M=>N6)@T6+?OVK=`R;THZ#2V.\&GCSU^-&LBXU.!2HP:R&LB0(6N`K$&#!@T:
+M-&CP[ATR%_Y`,!'CH4F3)DV:-&G2I$F3)DV:-&G2I$F3)DV:]#&"A].0.CN$
+M2.&P@P,'7[Y8V;%C!TR)2KUZT;-&0(0<.?DP8``T!M`8;&,<T*$S`AX=:M3H
+MI#@F8L0(3PX<C'$V9LR8,?'&`(P7;XRS"A6V;-D2!4.,&!7&.(LR!A,F3)CR
+M8<.&[LP9;-BP.7.&"1,F.3'2Q(B1)L87.7+R88B'R<$8.7+BH?\8X\`9H"U;
+MMFS9`@B#LS'.QCBK4*'"E@I;MFRI4&%,/`?4X-'!08H4G&YITF#1LF_%"BU%
+M=%G2T.)(&S[^_/GC@@Q9C1HU:M1`5@,9,F3(&C2HT:!!@W?OWKUS@6L6"#Y,
+MFC1ITJ1)DR9-FC1ITJ1)DR9-FBQKTJ1)"R-XQ'`08L:,$"%"./CRQ2J!'3!@
+MGI005RI2('H]?-"A0P<%ABC8`&'#-B8>BA$C1HR`1TU:BA0I1(P8,6*,`V<5
+MG(T9,R9>E#%CQE2HX&Q+!4!1HN2+DL]9E#%1QF#"-,\!NC/8`"[!!FB,,V?.
+ML&F)D09'C'Q88L3()P<%)@<.XLW#("?_7KPQ8\9LF3-GRYPH4:(X&S/&P1AG
+M%2ILJ;!ERY8*SL:,<4"-VHAJI.!T2Y,&"Y9]*U;LNR8MFH80+8Z0XQ/`GS]D
+M-6K4J%&#2XT:7&K40-:@1HT&-1HT:/#.A0MDN*#0@L:D29,F39HT:=*D29,F
+M39HT:=)D69,F>)HTX<1I!P<S9LRH$*+"%RM6"1(D^"9.7+$/?B)!\-/(VAT?
+M\*3)R8<A'B!L\<:,<>!@Q(@1=*1Y29$B!9T1#AQ@&E-AC+,Q%<;$&^.L@K,*
+M6RI4V%(A2KY\..;-PX8%![9N.#`LP;0D2@5`@%8XVQ<#1YH8,;"DB9$OGYQY
+M#C"-P30FGIQX_P#C.<`T9LR6+8"V``($J(*S,<[&.*M0H4*%+16V;-E288P#
+M%-1&P,,!!TZW--FP8-&R;]^^:^P8W$`SH`6Y-E!`^$-6HP8W;C4"^*M1`UF-
+M!C4:U&A0HP&R!LB0(?,'!1JY(T>:-%G68EF3)LN:-&G2I,FR%DU:+&O2Q(@1
+M,5*$"#%CQI<*%>94L&(%ZYNX8C^40(```0($"!`:4:KUX($T!#&BQ!N#;<P8
+M!V,<H*,S@HX($2E2I*`SPL&8,<Z<C1D3+]Z8,6.<.=M2H4(%9V/&S,N'88R#
+M?'#@X$B3)DV,?/GR15D!:,Z6+5&PQ$B3)D:,&%CRQ1OCP!DF9P[BC?^)YV",
+M@S%C``':`@@0H`H5G(T9,\99A0I;*FS94F%+!8`5*HQQX(G:B"*ING5+@P6#
+MEGW[]FDI<H+!)GPW6APAQ\>?/W_^:@2H$:!&C1HU:M2H4:-&C1HU:C1`5L,?
+MGS;D_@P8D*5)DR9-FC1ITF)9DR;+FN!9UF1!DR8M.(FIPX&#+U8J5'`PIT(%
+M*SO?]!13HH0($2)$B!"!8,A/('H&\HA(@2.?'$#8`&$;,V;)"`<CZ(B@(Z):
+M"CJ>/#D8XVS,F#%CQC@;,Z9"A0K.G#D;,V8,BB@88L3`$@,+!@PQTL3(AZ'"
+MEBUSMCA3L`)#OA@QTJ3!DB_>F#%CQC@8,V;_#(HQ#L:,J3`&4(4*@"I4<.9L
+MS)@Q8YQ5V%*API8*6[9LJ3`FGH,1GD9<(]4M31HL6+1HV;?OFK1HFS;A0S,`
+M#T!R?*#X\\?-7X``-0+X\U?#7XT:-6K4J%&C1HT``=J0^S,@RX`L`YHT:8*G
+M28ME>/`T:=$$3Q,\3?`T,6*D3AT.0GSY\J7"W`$5*EC9>:*G6")O1&+%BA6+
+M"!$(2CZ0.43/&@$OU7#DDQ,O"B!LSK`Y0.%IQ`A==(X=.X;"$R8'SL9$B1(/
+MDP-GSBHXJ^"LPI@Q\3QAFI<O1KY\&*)$P1`#!XY\@+9L`;1ESI856J)@R!<C
+M1@P,4<:,&8.MPAAG_V/&C'$PQL$8;(#&8!M3H4*%,6,PC1DSID*%+16V5-A2
+M84N%"A7&Q!OAB=HQ.&G28,&B1<N*?5J*H+(4(@*^$#<&'.$3`$J```$"!`A0
+M@UL-?_YJU*A1HT:-``$"!&AS`>"?`0,&#!CPYT:3)DV:-&G2I,F")G@6-&G2
+MI(D13D/J<!#BRY<*%0?,F5.A`@R8<38F#;-`)%:L6+&(0%#R@8H+"8<H]*CU
+M@!2.?/.BQ`,$:`RV>"@\C8!'3<2Q8P@<.'#@`!.&?%'&8!HSQIDS9\Z<C7$P
+MQM.($?'BS9N'`4,^+/G2X,B'S5F%+5L4;`&4#U"4*!CRY8LR9LP80("B`/_"
+M-F;,&`=CQHRI,`;;&&R`L(T9@VF,@S%CG%78LJ5"A0I;*FRI,&9,/`>>/,7H
+MEB8-%BU:]JW`=LU8&65-;H2X$6)`"W)\`D`)$"!`@``!`M0(X*]&C1HU`@0(
+M$*#-!7)__OSY\^?/GS\W-#1I@J<)GB9XFN!IT@1/DR:%C-3A`%"($`Z^5'`P
+M=\"<.16LP(S3,RF1B4_>8A&)!0$"A`^JUDDPQ8("!6M7>,'!<2P?ABCQQF"+
+M%\\!G1'4J*$XAL*!`P>8QN3#D2_>F#%CQCASY@P3)D^>''CRY`#%/&Q+YF'(
+MER]&FGSS`%6H``@0("WY`(T9$T6+%D`5*HP!%*7_`J`*8\:@&#-FS)@*%;"-
+M`30&T)@Q8\:,&3/&684*6RILJ;"EPI8*%<;$\^0)79IN:=)HT;)OWXIYU]@I
+M:X+GQHT;^&X,.$*.3X```0($"!`@0(`:W&H$"!`@0(``;=JTN7#ASY\C%_Y<
+MN*#AQHTF39HT:=($3Y,%39K@P6.DS@XA'(2HX*#"W`%SYEC9`<-HG(USDUP-
+M,V'"V[!A?HI]`+A.PHX=)%A4Z='CR@,X<'#$P!`E2I0Q\1R@D#-BQ(@1*%#$
+M0^$`4Y08^>(Y&#-F3(4Q8\8X<.")V@@'7^*-<+#$P;QK^;#$P!`/6Q1`4;1@
+MR(=E#"9G%0`!`E2A`J`*_Q4J5!@S9DR\,6/&C!E380R@,8#&5!CCS,&8,6.<
+M.:M0H4*%"A6V5*@P9LP8!^A0X$B3!HN6?2M6[+M6I(RR)BV:W+@1(LN`/^3:
+M\&D3($"```$"U`A0(T"-``$"!&C3IDV;"Q>.7+A`CMP%<B%N:+C1I$D3/,OP
+M-,'39`&>!76D"!'"P1<'%>;,F3.G@A482)#$Z;$Q:=*D1(DFE2M6K)2X5V9V
+M;"-19UN5'CW^/<`!!T>,?/FB5(@W)MXQ!R-&`/0T`H4#%/$<H(@7;XR#,6/&
+MC(DR!@4*%"BH>4*!8(0G=.CFS;L6(T:^+TL<.,`6)4H40%'&.,,&"-"6+5LJ
+M5/^H4,&9LPK.XHV)-V9,A0H5*E2H4*%"!6?.QHP9,V9,!6=;*E2H4&%+A0H5
+MQCAPX"D?CC3YYFG9MV*%EFOLTC71T*>)AA`A0F1I<80<GP`!V@0($"!``&X!
+M`@0($*!-FP!MVK1I0XX<.7+DR%VX$.(&FB8WFC1I@@?/@B9X\'`:LD,(!PX<
+M.)@S=^"`.16L$H"!!$F/'CTV;-BP84./N%+B%E6BL>.>&$X+ABSH4>:.EP<X
+MX,#!D2]?E'SQXLGQY,D3'10./#F(%\\!)@<.4(P9$V6,,P<.'#@8(8?.B!$C
+M`(Y`-V+>/#ERKEV3@P*3@S'.G%6HX`P0H#F``&W9LF7_"Z`*6[94J#!FS)@Q
+M\;"-P59A3(4Q%2I4&.-LC(,Q8\8XJU"A0H4*%;94J#!F#"84F&)TPX)!BY85
+M*U9H<>*#QXT;-YK<"'$#7Y8!+<B1:Q.@39LV`0($"!`@0(``;0*T"="FS84V
+M;<BUF="&'#ER(="@N8&F29,F39K@P=-D"(D=4H0($<+!G+`#YLRI4,$*#!A(
+MC!B)T\-('"-QXL2)>Z*OA!DS=>IP6K!@09@P!.Z(\'*L&AQ2.'`<DQ,OGP-/
+MGD:,<##"@0,'#L:@<.``DX-X8\:,&>-@Q`@Z(U"@0(%BQ(@S3E#(D2-'CAP4
+M#AR,&;/%V18=<^;,V3)GRYPM_P!U;-FR98NS"F/&C(DW9DR%"A4J5*@P9LR8
+M,0[&C!DS9LR8,14J5*A0H4*%"F/&C'&`#4<,+%JTK%BQ;]\U:0QXA`AQXT:(
+M$/AN9+G1X@^Y-FW:!`C0)D"``#4"!`@0H$V`-FW:M&G3I@VY-N3:M&FS)P0:
+M-!K0-&FRK$D3/'B&U)$B10H'-N8.'#A@SIP*5JS`@`'#Z`FC;T\8?7NB[XD^
+M?;!*F!%2AP0>3G@6+"A#H)87$0^J58-#BA2.8W+R><(TPH&G$2-&.'#@P($#
+M!PX<.!@S9LP8!PX<.!@Q8L0(.BB6C!CAR0D*!'(0H!CAR<&8,5NV;)DS9\N<
+M.3ITZ/_0H4/'ECE;*E3`-F;,F#%CL%48LV5,A0ICQC@;,\;!&(`.QHP9,Z9"
+MA0H5*E08,V8,)@?YTF#1HD7+OA7[M'R)QF/7K@@A0H3`AP_?C2/D)I#CTZ9-
+MFS8!`@0($"!`@`!M`@1HTR9`FS;DVK3ATZ9-FS81]NQ!@^:&AAM-FC3!PZE.
+MG1ULI+`1=N#``7/FS*E@90<,&#!@8(%Y`NN)G2>P2M@I`<N,F5O;ABS@M`!/
+MF3!WO"!(<>Q8M6IP2,&!@^.8`T\C1HP8X<"!`P?Q'#APX"">`T]C'(QQX&#$
+M"$^>1GAR,`(%"A0.4*!`@0(%"D\.'(QQ5F'+G"U;=,S1H4/_APX=.G3,V3('
+M4`5L8\;$&S.FPI@*%2I4<%9AC`-,8\8X&#-FS)@QSL8X&S-FS)@Q8QR,21,#
+MRSXM^_:MV'?-"4`&/$*LB1`A0H@0(?"UX`.%#Y\V;=JT"1`@0(```6H$"!`@
+M0(`V`=JT:=.&3YLVY-H$"+!KUYX0(="@N=&D21,\G,34X2"%S8$#JPX<.&!.
+M!2L[=NS8`0,&#"P[8.S8L5/)3B58E<P(D3)JP1`\>/`L6$!`1`HYQXY5@U,-
+M#APX<'`X&.%@Q(@1(T:,<#`&DP,'#AR,P.3``28'#AR,<#!BA(,1(QR,<(`"
+MA0,4#E"@<.#`V9@*6[9LT;%ECHXM_W/FS-$Q9XZ.+8``C1DSQL&8,8"P51A3
+MH4(%0&.<C1GC8(R#,0[&.!LS9LR8,6/&.!CC`%,4'%BT[-.R8L6^:T72\=BT
+M)D($?"$V1;C1@H\+*LCXD&O3)D";``$"U`@0`&"```$"M`D0H$T;/FW:\.'3
+M)D"``&LB1-@3`@T:#7UN]#'"J4Z=.FR$<5JUZH`Y<RI4L+)CQPX8.V#LP+)C
+MQXX=.W;LV*EDQHR0;:/*+."$!QB>!01$($!P+$:U:M6JP8$#!\>($2-&C!@Q
+MPH$#!P[&.'#@P(&#$0X<.'#@P($#!R@<C'#@8(2G$2A0.!CAP($#!Y@PC:FP
+M9<Z<.7.VS/^9,V?+G#E;MFR9`Z@"MC%CQL0;,V9,A0H5`%6H,&;,&`=C'(QQ
+M,,;!&`<.'#@8X\#!&`<.XL6(@66%EA4K5F@I@HH'#W=KUN##%P&?AA9\7#!C
+MYB)`FS9MV@0($*!&@``U`@0($"!`@#9\VK1IPZ=-FS8!`OA;LV;7GETAT*"Y
+M`1#-C1:<Q+`1(VS5JE6K#I@SIX(5*U9V[-@!8\>.'3MV[-BQ`\9.I025S.S8
+M-JK,`CQ'CBQ84$9$D2(QCAW#4>T8'!QPY#CP-&+$"`<C'(QPX&",`P<C1HQP
+MX,!!O#$./#D8X6"$@Q$.1CC`Y,`!"@<H'#@X@\G9E@J`M@#:`FC_#J`M@+9L
+MV3)GRYP*%;`Y&^-@S)@Q@,8`<K:B`J`*8\:,P>3`@0,'#AR,<>#`@0,'*%"@
+M<.`@2@PL6E;LF[-BQ;4IZ7ALVK4K0H0($?"18"&#6;!@,ORU:=,F0(``-6H$
+MJ!$@0(``;0+P"1"@#9\V`0+P"1`@0(`U:];LVK4G1`@T:/KTX<2)D[`#G%:M
+M.F!.A0I6K.R`867'CAT[=NS8`<C*CAT[=NQ4LF/&E)0Z"\H8N7>DQ9$%86J)
+MD'/M6(QJ<'#@D",GW@@'(QR,<##"@0,'F!PX<.!@Q(@1#E#$B^?`P0@'#D8X
+M<.#`@2<'#AR,B1<OG@,'SIQ5`#0'T)8Y_ULJ;*FP9<N6+8```:I0P=F8,6/&
+MC!DSIL*8"H`J`*HP9LP8!PX<.'#@P($#!PY&H*#C@(X#!P[RQ="R;]^*%2NT
+M%(G&8->>79LB1(B`KP4?&<&"!6,FPU^`-FW:!*@1H(:_`/X"!&@3($"`-@':
+M!&@3@$^`-OYJU%BS9LV:7;MV[4&#!DT?#V*$>1!VX,`!<RI8L;)CQPXK.W98
+MV;'#RHX=.W;L5+)3R8X94T+J#%FP8`&>(T>.+%C60X07!-?D`(R!`P<.%/$\
+M>4+A8(0#%`X<.!B#"9,#!RA&C!@Q`H4<.2@<.'#@P,&($9X<.'#@P($#!PX<
+MC!E3`1`@0("VS/^IL*5"A0J`*@"JL`50A0ICQHS!Y@#;&&QC`%6H4*$"H`IC
+MQCASX,"!`P<.'#APX&#$B!$CZ#AP`"@?%BW[]JW8ART;*@8A-NS9M6G3)GPW
+MR)%A%BP8,RNG_`6XT*9-@!HU`M0($"!`@`!M`O`)$*!-FP!M`@0($"!`C35K
+MUJQ9LVO/KCUHT/0IY,$#IP,>#I@SI\*.'3!@P-AAQ<H.*SNL[-BQ8\>.'3N5
+MS)BYM6/(O04+\-S#<V_!O65E:GE!("=?OAAR4#AP,,;!&`<.'#AP,&:,,TP.
+M/#F@,V+$B!&>`,J)XLF!@Q$.1CAP,,*!)P<.QL0;,V9,O"A1`%68`VC_RY8*
+M@,:,&0,(4`5`@``!PC9FS!@'8["-P58!&R!`@`!5`(1MC`,'#AR,<#!BA(,1
+M(T:,&#$"!0I/,;!HV;=BQ8I]6%`IVQ1BSZ9=FS9%R'+!GQ5FP9C)D(&,SX4+
+M;0($"%`C0(```0*T:1,@0)L`;0($"!"@38``-6K46+,&P)HU:W;MV;,'S:\^
+M'CAYX'1`&!L5=EB!`0/&CAU6=EC9L6/'CAT[=BK9J23$S*T==>YQPH/G'IX%
+M]_#<"Q.&0"T1<C#DRR<GG@,'8^(Y<.#`@0,'8\:,P>3)`1T'=$:,<.!`3KP1
+M#AR,&.'`P0@'#AQ@<N#`@0-,F,:,B0)H2X4Y_P`KS,$V9HRS,5&B1(D":,R8
+M,6/&C!DS9@RV"F,``:I0`5"%"MC&.'#@:<2($2-&C!@Q8L0(:B-&.!@3`X.6
+M%2M6[+N&ZH2E37OVH$'#8%,3$OYD6`DFPXJ5=U#(7;C0IDV```%J!`@0($";
+M`&T"!`@0($"`-@$"!`A0HT:--6O6K%FS9M>:/7OV_"K4QX.'`YS8L%%A!PP8
+M,';`V+&C@A4K.PG`V+%CQTXE.S2$;*M#XAZ>>WCPW%NPX-X]$@O*W$$@!P,&
+M0&/&C!DS9LP8!PX<C!GC;(P#3"-&C!A!9\0(3_'BH7`P8H0G!R,<C'#@P),#
+M!V,P.1LS9@P@0!4J5/^H,`80-F?8Y&#)AR%*A3%CQHP9,P8;MC$5L%4`A*T"
+M((`5*E08,V:,@Q$.1HP8,6+$B!$CZ,`;`<^3)PPQM.Q;$47+O"+1-*!!LV?7
+MKDT\0BR`\LZ*%2LRF,E`1F[`GS9MV@0($"!`@``!VK0)T"9`@``!`@0($"!`
+MC1HU:C18LV;-FEUK=NV*L`<-FCY]"A7RP$F8%"%V[(`!`P:,'15V5)BQ8\<.
+M+%B5S)@1(J0.B2'W%N#!<Z3%`CP+%BQ8L"S,'2_YHD3!-&;,F#'.QC@8X\"!
+M`P<.G#EPX&G$"#H.1C@8D<^!`Q0C1HP8,6*$`T\.'&!R@,G!F#%CH@`:`ZC_
+MPI@YSL9@RQ<#1XQ\4<8X&S-FS)@Q8\94&#.F`K8*8P!AJP!H3(5X#AQX&C%B
+M!+P1\$;`@S<"'K41U$;$P*!E'T!L\ZX58;=,`QHT(?!MBK#I!@D),F0\>L1,
+MA@L^`P8,N$"N38```0($:!.@39L``0($".`O0(```0($J%&C08,($7;MVA4A
+M0H0]>_"A^=6G3Q\C'CC5X:#"#A@P3\#8L6-'B`HS9NR8J61&R*UM.^K<6X!G
+M`9Y[>.[A67!O09@P9>Z(0(!B3`5G8YR-<39FS!@'#APX&#-FS)@1(ZB-&#'"
+MP0@'^5`X<.!IQ(@1#D8X<##"@0-,F)R-&1-ES)@*_X```1HS9E^4;CABQ'.`
+M:4R\,6/&C'&&K<(80&,``1H#:$P%0!4`C<'F`,6($2/@P1L!#QX\>/#@P:-&
+M;4D:#%JBS+MF3!J!93?0W,`7`A^^`4?X2'#Q3H85*RZ@M,@R`."`(VW:!`@0
+M($"``&T"!`@0((`_?P$"!*@1H$:-&@T:U`@1(<*>/7OV[`F!#TV6&WWZ],'3
+M@I,8*4+,V`%C!XP=5D*$"%$AQ(P0,T)N[:@SY-Z">POP++B'!\^]!??"+.A!
+MX`X=.@Z<.1LS9HRS,<[&C''@P($#!PX<.!@Q`AZU$0Y&.(B7+YX#%".HP1LQ
+MPM.($0X<.!@3;\R8>(#&5/\8@PW0&$`88N!((\>!)P<HQHP9,V;,F#$5QHRI
+M,`;0&$!C`(T!!&@,MC$H'(SP!`\>/'CPX,&#!P\>O`PCY*3!H&7>-6DB<O1`
+M<^-&B`@1LOSAX\^?"Q<N9,CPQZ=%EBQ96EP@UR9`@``!`@1H$Z!-@``!`@0(
+M$*!&@``U:M1H`+!!@Q!HT*`)L0?-'C19;MRXT:=%GQ9X\!RI(T6(&3MV[)@1
+M(D6*%"E2I`CA4*=.'1+W%N!9<&_!O07W%MR[=^]>F%IW=(T8@<G!F#%CG(T9
+M,\:!`P<.1CAPX&",@Q'PJ%$;,<*!`P=1\L6C,X+:B!$C1GARX,F!@WCQX@&*
+M,J;_PI@*8\8`BA(C1@P4(SR-<!`OWI@QV,:,P3:F`J`Q@,8``C0&D#-`8\9@
+MP^9@!)T1\.#!@P<O`[P,&3)D$"`B6PP,\^9]8<>N2I4LOT)LVA3B0H!'[USX
+M@R+!!9\C-[+@PY=EP!%R;0($"!`@0(```0($"!`@@+\:-6K4J%&C1H,&#1J@
+M"8$F"YH;:/#=N''CQHT^35JTP-."$Z<Z'(0(`4C#C!DA4MC48<.&39TZ=4C<
+M6W`/SX)[]Q;<6[#@WH)[8<(0(*`+GB<'#AR,<39FC+,QSL8X<.!@!`H'#APX
+MH`,/'K41(T8X<!`O7SP4**B-0($"A0,4*.+%BS=FS)@Q_V/&`(H7;TP\#!@<
+M>#HSP@$*%&/&`!HS9@RV"F,`C0$T!A"@,8#&`!H#:,P8!RA&C(`'#QZ\#!G@
+M9<B0)$,&`0C@R+E6Y(NQ.SVJ5&EQ(T*(%N2067GT"%D;%E#XX,$7(0(^?/BR
+M'"'')T"-``$"!`@0((`_*`$"!*A1HT:-&C4:-*C1H,:-&S>:W.ASH\F-)C>:
+MM,#3!`\>/'CP<!I2IXX4*;=N[=@VA!,G3ISP&,%C!`\>/`ON+;BWX-X1$@O*
+M``S3H]:=.[K@P?/DP)FS,6/&C!GCP,$8!PX<.'#@P(&#$2/@4:,V8H0G!PX<
+MQ(N'@@XU.2A0H(@7+]Z8,14`5?\8,V9,/!0H1GBBYFD$G1$.4&##!F@,H#&`
+MQE3`-F8,(&=CG(T9,P;0&$!CL&%#@6($'6KP,F3(D$%`A@PGD@@042U;$1'2
+M[A"XTZ-'E1;X\+4(((.9E4?(VAPYTN(&/GPA\.T)@2_+D0MM`@2H$2!`@``!
+M_`4(X"]`C1HU:M2HT:!!@P8U`C1ITN1&DR9-;C1ITJ1)DQ9-\"QH@F<!GGOW
+MAI#81J+.D"&<..$!AJ</GCYX\.!9@*?%`CSW\-PC<:\,@3LB1.C2!6_$"`<.
+M'(P9XV",@S%C'(QQ,,:!@S$.`#H8,0(>-6KPZ(P8X<F!@WARY,B)%P^%`P?Q
+MQHRI,`;_4(4*%>*-03%BQ`AJ(^B,H.,`!;8Q8RH`JC"F`K8Q@,9@&S,&VQA`
+MV,9@&X-M##8'=$;`@Z<K0X8,&3*<B!8M2081QU*(N'.'`($>/7I4:?&'G#\9
+MS&2X:$/NR(`;62)$B!!BSQY\^+*T(,?'7X```6H$"!"@1H`:`6H$J%&C1HT&
+M#1HT"!"@38LF>)HTP=,$3Y,6+?#@:8('#YY[>/`LX'1O`:=[0^[=XX2GB1$\
+M??KTZ=.D#YX6>!;@N7?O'AX2]\+4$J&+#ATZ(^!Y&N'`P1@'8\:,<>#,@8,Q
+M#AR,<>#``9T1\*A1@S=B!!T'GAPX0"$GWA@'SAR,&1.O`J`*_P#'.,,V!EL\
+M3R.H4:,&;\0(%"A0C!E3H0*@,8#&5!@SIL*8,8"PC<$V9LP8;&.6H$`Q`AZU
+M#!DR9,B0)$.2)-&BZ1(A0H2N.P1Z].C1@T"5"5!<,&,FP]^1+`.R9,$7(<*N
+M/2'P10BQ)\L?<FW\!:@1H$:`&@%J!`A0(T"-&C5J-&C0H$:-`!<N&,&#!X\1
+M/$WPX#'2!(\1/`OP+,!S#P^>!9SP<+J'A],"/`OPX,'3I,^-&TWZ-&G2H@4>
+M/'CPD""Q($RM6M*<C!@QPM.($71&.!CC8(R#,0[&.'`PQH$#!PX<T!D!CYH`
+M>+I&C!@QPI,#!PX<C''F;,P8;("P`?^J4,%9A3%C/(V@!@\>/'CP1HQ`@2(>
+MMC&`*E0`5&$,((`5L`$:,V;,F#'8QHQ9L@2%DQ'PJ&7(D"%#A@P9DIR(5B^)
+MCSMW[MPA0(``@1X]>E0Y)(,9,Q=06N"+@`\?OA`1]H2(L&?/GCWXLK0@Q\=?
+MC1H!:@2H42-`C1H!:M2H4:-!C08-:@1H<^$"G@5X\.!9@`</G@5X%N"YAP</
+MGGOW[MV[A^?>O7OW[MW#<^\>'CQ-^MSH<^-&GSY]FK1H@0?/D7L+PM3R(L*)
+M@S$.'(P8,8*.`P=C'(QQX,"!`P<.'#APX,#!"#KP,@C(`$\7O!$C'(QP@,(!
+MH#%CG(T9XVS_S)@*8P!A&X/)TPAX\.#!@P>/VH@1#N*-&8.M0H4*@"J,J3`F
+MWI@Q\<8LP;9DR1(4=$;`HY9!0(8,&:(ER9`D&L`329+XN*.+P!T"!,+T"-.C
+M1Q4)+JA`.7(#WYH($2+@V[,G0H1=(?9$V(,ORQ]R?/SYJU&C1H`:-6K4"%"C
+M1HT:-1HT:%`C0)L`;2[@P;,`SP(\>!;@N8<'SST\]^[=PW,/S[TC]^[=PW,/
+M#YY[>.[AP8.G29,;(6Z@N7'C1I\^+5JTP--D0:U_(N2@P#;&@0-X=."-&./`
+M@8,Q#L8X&./`P1@'#AS0&0$/7@8!&>#1&3%BA"<'#L94J`!H#"!L_]BPC1F#
+M#=N8)9ZHP8,';P0\>/#@41LQ`L48;&.P`:H`J$*%>!7&Q!L3#T4\%`Z6T!DQ
+M`AXU`1DR9#@1+4.T:-&21*L7K<P=`@0($`A#($R/'CUZL.##IP6^"!$B1(@0
+M`>`>-'M"[(H0(D*$/?BRM"`7P%^-`#5JU*A1HT:-`#5JU&C0H$&#&@$"M&G3
+MYL(]/'CNX;F'YQZ>>WCNW;N'Y]Z]>R3NW;MW#P^)>WA(W+M'XAZ>>WA:]+EQ
+M`\T--%ENW+CQJT^?)DT6A"%PY]H\;&/&.*!#!YX#!P[&.'#@P($#!PX<.'#@
+MP,$(>/#@94B2P8>N$2,\><+D8`RV"H"B8/^+APT;)G1+EHP8X0G>"'BZ,NB"
+M!P\>/&HC/#EP$&\,H#$5L`$:$R5>O'CQ'*!8XH0./'@9,F3(D"%#M`S1HD5+
+M$BU)O70G"!`@4(9`#P(]PA#H0:#*O18#\.&+@"\"O@A[T/P*L2="A#T1(H2(
+MD*4%N3;^:OBK42-`C1HU:M2H`;!&@P8-:M0($*!-@`!M+N"Y=^_>/3SW[N&Y
+M=P_//3SW[MTC@><>GGMX[MW#<^_>/3SW\-S#LP!/BR8W;J"YD07-KU\W?MWH
+M<Z-)$V4$1""(-V:,`P<CX#EPX,"!`P<.'#APX,"!`P<.'(P8`0]>!@$9X&48
+M06>$`P<.X@$"A&W_WA('GCQY&H%NQ`AJ\.!ER)!!EZX,\.#!@S?"TP@'#N+%
+M`S0FRIAX8\;$0X$"A9,1(^!1RY!!0(9H&9*<B!8M6K1Z2>HEB5:&@(\R!'H0
+M"$.@1X\>!'JTN!$!'SY\^-:LV?/K1A8T(2+L"K%GUYX(6?Z0X^.O1H`:-6K4
+MJ%$C0(T:-1HT:%"C1ILV;0*T:7/AWCT\]_#<NX?GWKU[]^[=`XCGWKU[]^[=
+MNW?O'AX2]_"0('&/!)Y[>.[AP7/C1A8T:-#@0Y-E3Y\;:+(TT5#FWS$Y\^+%
+M0^'`@2<'#APX<.!@C`,'#APX<.#`P8@1\.!E$)`A`[P1\#`Y<!`ORKQY__$<
+MC(`'CQHJ>/`R9,@0+4.&#!DR9-#E0Q<\>-3@41LQPL&8>/'&Q(L7#T4\%"A&
+M4*-&30"J)!F21(L6+5JT:-&B18M6+TFZ$P1\A/%!(`R!'@3"$"!`H$J3`5EN
+M9(D0`5^$7YQ:],$7(D($?!'V[(F0I06Y`/[\!:@1H$:-&C5JU*C1H$&#!@':
+M!`@0($"`-A?NX;EW[QZ>>_?NW<-S#\^]>WCN<;J'YQZ>>_?NW;MW[]X]//?N
+MW<-S#P^>/C=N`,R2!0V^+&CPH<&'[\8-#<NNI#B6+\J8>"@<.'#@P($#!PX<
+M.'#@P($#!PX<C*!#!UX&`0($P*,V`D6\>!BBQ/^;AV+$"'BH4,%#E2%#AF@G
+M3IS(D"&#CPP9,F3(``\>O!$C1M!QX"`>BG@H4*"@,P(>/'@",F3(<")#M`PG
+MHD6+5B]:O7I)ZD7+0,!'F3`$RA`@0(!`#P)A>K1H<:3%`'P1?@$[<J3%#7PA
+M(H2($"("O@A96K1IX\]?C1HU:M2H4:-&C1H-&C2H$:!-FP`!`G!K<^'>/3SW
+M[MW#<P_/O7MX[MW#<^_>O2'WAMR[=^\>GGMX[MV[=^_>O7MX[N%IT>0&&C19
+MT.#[]0O?GBPW-H7H84U$BF/YXD6)-V:$@Q$.`(YP,,+!"`<.'#APX,"!)T^>
+MJ%$3(`#>"!3QY,2+$B__'@H43N"A0N7#AX\3/DZ<.''B1+1H&:*=.)'A1(8,
+M&3)0RP`/WH@1(^@XH#."S@AXU.`)R(`J0Y(3T:)%BQ8M6K1ZT>I%JU<O230?
+M!,J<\!&&``$"!'KD(!"FBBDH4"8,P)=E@!@Q1X"AP8<O0H0($2*$B)#E#SDH
+M_FH$J%&C1HT:-6HT:-"@08``;=H$"!"@39LV%_#<NW</S[U[]^[=NW?OWKU[
+M]^YQNG>/T[U[]^[=NT?BWCT2>.[=NT<"SX(6>&[<R((F"YH0>[+@0Y/%TK(>
+MM7P@.)8O'X8H\1PX&.%@A`,'#AR@<(`"!0H4*%"@0$&'C@@4"!#(D1-%3KQX
+M_P#CQ9,V`AX\'SY\E#EQXL0)92>BG4@2+5J&:-&BG<B0)$.&#!G@P:,V`MX(
+M>"/@4:.604"&#$DR1#L1+5JT),JB18NF+%J]>O7JE?'AXT29,@0($"!`@$"/
+M'E4.29#`YTB6+,#(,3G2(DN6$/A"[-JS:\\>?%E:D&OCKX:_&C5JU*A1HT:#
+M!C5J!&C3IDV```':M&ESX=X]//?NW<-S[]Z]>_?NW;O'Z=Z](??NW;MW[]Z1
+M>_?NW;MWC\2]>_=(X,&#ITF?&VC0H,$7(@N:&R'J]:@%3P`=!#B.88@G)QX*
+M%`Y0H$"!0DX\.?'BR8D73TX^.7+D()`C1TZ\>/'BQ?^+%^\+"CKP?&3PX>/$
+MB1,G3IQ0%BU:M&C1HD4[$2U)-(#1HB7)D"$:J@P9J&6@EH%:!G@9,B3)$"U:
+MM&C1HD6+ED19M'K1ZM5+5R])F3)ERI0I0X```0($"(2I4H7%A",#!@PX0H[/
+MGP%9\(7`AR]"A`@1(H3`AV\`N0#^_`6H42-`C1HU&C1H4"-`FS8!`@0($"!`
+MFS87[MV[=P_/O7OW[MV[=^_>/1+WAMR[=^_>O7M'2-R[=^_>O7OW2-R[1^(>
+MB7MX\#1I<N-&%C3X\&4)H>'$'6D"1M!!@`/'L7PQY,A!@0(%BG@HY*"()R>>
+MG'ARYL63$P^%'!3QXL6+%P7_6Y1X\>;1<0)/EX\3)WR<.'$B6K03T4Y$BQ8M
+M6K03T4Y$BW8B6K1HT9)DR)`A0X8,\#)D2)(A0[1HT4XDB98D"<!Z2>HEJ1>M
+M7KUZ]925.5&F3)DP!`@0($"@1X\%>/!DR9)E`+DVY(ZTR((/'SY\$2)LBK!K
+MSYX(65H<:1/`7XT:-6K4J-&@08,:`0*T:1,@0(```0)`NW#A'IY[]^[=PW/O
+M'IXC]^[=NW?OR+U[8NX=N7?O'@D2).X=N7?OWKU[]TC<NX<'#YX^-VZ$N!$B
+M"SX-RNY(@X?.B9,OQW#@."9'#@(4*%"@0($"!0H4*%#$BQ<O7KQX\>3$BR<'
+M4!1`_U'BC1F#(IZ#$?#@^<C@(]J)$]&B18MV(MJ):-%.1(L6+=J):-&B18L6
+M+5J2:-$R9,B0(4.&:-&B18L6+4FT:$GJ):F7I%Z]:/72U8L6K4R9,LO"A`E#
+M@``!`CVJ++AQ`V"6%D?(D9MP9,``?/CPH<&W9T^$"!'VX,.';\"?-@'\!:A1
+MHT:-&@UJU*@1H$V;`&T"M`G0)D";"Q?NW;MW#\^]>_?ND;AW[]Z1>_?NW;MW
+M[QZ)>R1(W+M'XMZ]>R3NW;MWC\2]>_<6X&G2Y,:-$"'PA=`0AITN:E^<.!E!
+M)\4Q.0A0H$"!`@4*%`Y0H$`1#T4\%/&P88L7+UZ\>-CB`?^*-P90O'CQ4*"#
+M-T)7AA,93D3+D"1#DFC1HD6+%BU:M&C1ZM6+IBQ:O6CUHIU($BU)DFC1DD3+
+M$.U$M&C1HD6+5B])O23UTB6I5R]=/67*PI0I4R8,@3)E"!`HLZ`*GAM9!OR9
+M0.[(GS\#\.&+$`%?B#T1]H2($"$$O@@#CI"#`C"`OQHU:M2HT:!&C0!MV@0(
+MT"9`@``!VK2Y<.$>GGOW[MV[AT?,O7OW[MV[=^_>/1+W[MV[=^\>"3PD[I&X
+M=^_>/1+W[MV[=P_//3PMFMRX$>)&"`U5KEPQ)H*.$VE?4'Q!\`4%"A0H4*!`
+M@8(."A0H4*"(ARU>O'CQYL6+%R7_7KQX\>)ABQ</Q9(1J.!ER'#BQ(D3)Z*=
+M2)(A6K03T:)%BQ8M6K1HT:)%BQ8M6KUHT:)%2Q(M6K1HT:)%JQ>M7KUH]>K5
+MJU<O7;UZZ>K5JU>F3)@R9<H0($"`0)DP/1;T:3&`#SER?XX,&#``7X0U^"+@
+M0[-G5X0($?;LP8>O!3D^_OS5J%&C1H,&-=H$:-.F39L``=H$:-.FS84_]^[A
+M`7COWI%[)/#<NX?GWKU[]X[<NW?OWCT2>.[=(W&/Q+U[]^[=NW>/!(E[1\20
+M($'B'IXF-VZ$"+%@09D3/MB)$"%"A`AI(A!(<[($!0H4=%"@H(,"1;PE\;#-
+MBS<O7KQY__'BQ<,6;TP\;/%0T'%"+4.&$]%.1(L6+5JT#-&B18MV(EJT:-&B
+M18L635FT:/6B18M6+UJT:-&B1:L7K5ZT>M'J1:M7KUZ2>O72U4M7KUZZ>B<6
+ME`E3AD`9`@3*A`E#@@0)<A/('?DS8$"+`5GPX8L084^(/7LB1(@0(4*$$/A:
+M'.$3($"-&C5J-*@1H$V;-FT"M`D0($";`&W:7/AS[]Z]>_?NW;MW[]Z]>_?P
+MW+MW[]Z](_?NW2-!XMX]$O?N`21QC\2">_=(D"!Q[]Z$'2QV3*B"IT6($"$T
+M6`I1KUZ]:"=\$&!WQXL(:72DH8CG``4*%"CDH)@7+UX\;/'BQ?^+%R]>O'CQ
+MXL6+%R\>"CHC4`F(%NW$"64GHD6+%BU#M&C1HIV(%JU>M&C1HD6+%BU:M&C1
+MHM6K%ZU>M&CUHM6+5J]>O6CIZM5+5R]=O7J6TEFJMXQ`F3)E"!`@4"9,F##W
+M2$R80.[/@`$#!@S(,B`+O@@1(NR)$"'"G@@1]NS!%V+`D39\`M2H4:-!#6X!
+MVK1ITZ9-FS8!V@1HTZ;-A3_W\-S#<^_>O7OW[AW!<^_>O7OW[MV[=^_(O7OW
+M[I&X=X_$O7M5[MV[=^_>$#'W=IAZ14:"*3YX6F0)@6]3"`TA`&[:9,F2)0W*
+MRA"X(T*:$Q3Q4*!`$0]%O"_QXL6+%R__WKQX\^+%BX<B'HIX*%"@H.,$7H9H
+M)TZ<B!8M6K0,2:)%BQ8M6K1HT:)%JQ<M6KUHT>I%JQ>M7K1H]:+5BZ8L6KUH
+M]:+5JU<O7;UZ]2S52V>I7KIZ)\J4(5"&0!@"8<)4N;?@WI$C`P;<R)(E2Y8;
+M-V[@PQ<APIX($2+LB;`G0H@(^&X<(=<F0(T:#6K4"-"F39LV;=JT"=`F0)LV
+M;2[\^7/OWI%[1^X=N7?OWCTQ]X[<PW/DWKU[]^[=PT."Q+U[1^[=NT>"1)5[
+M]TC4V6'JU;I%JJBL<\/BR(T;64)D07/C1H@0NS9MVL1`69D[NJ1]0;$D7KQX
+M\>+%BQ=O7KQX_P#CQ8N'(AX*%"A0H(B'(AX*%'3@P<L0[<2)$]&B13MQ(EJT
+M:-&B18L6+5JT:-&B18M6+UJT:/6BU8M6+YJR:/6BU:L7K5ZZ>O7JI4M7+UT]
+M2^DL6:IWH@R!,@3"$`@S:L&"!2U:M&B1!1\^?/CP9<ER(TL6-/@B[-D3(<*>
+M-7LB1(B`[\8`<@'\U4!6HP:W-A?:M&G3IDV;`&W:M&G3YL*%/WCNW;MW[]X]
+M,7CNW;MW[]X]$O?NW;MW[]X]$O?ND;AW[QZ)>_?ND1A"HHZI5XL^E$ODIURY
+M#^M,D;B1!0V^+'OP[=F##PT^-+M":#AQQPL")_-0Q/L2+QZ*>/.6S/^+-P]%
+MO'@HY*"(AP(%"A0HQJ"@0P=5AA,GHIV(%NU$$H#1HD6+%BU:M&CUHD6K%RV:
+MLFC1HM6+5B]:NFCUZD6K5Z]>O7KUZM6K5R]=O7KI+-5+9RF=)4LGRI0A4(9`
+MF`5A[BW`TZ=/'WSX(D18$R'"'GSXLJ#)@@\?O@@1]JS9LRM"A!#XLK0@QR=`
+MC08U:@2XT.9"FS9MVK1ITZ9-FS9M+OSY<^\>'C'W[AVY1^(>GB/W[N$Y<N_>
+MD7OWCMR[1^+>/1+W2-R[=T_,/3$33"WZ4,[$IQDO/GD;YB>0A"IX;J#!E^77
+MKSU[]D2($"+$)DMEV'DI@@#!EWGSXL6+%R__7KQX\>+%0Q$O'@H4*%"@0!$/
+M!0H4=.!ER!#M1+03T:*=B!8M6K1HT:)%BQ8M6K1H]:)%JQ>M7K1ZT>K5JQ>M
+M'L!Z]:+5JU>O7KIZZ>JELY3.4CU+EM(QL'2BC`\"8<*$6;#@7HL^-[+@B[`F
+M0H0U:]9$B+!G3Q9\O_#ABQ!A380U$?9$B!`A2XL+;?S5J%$C0)L+%]I<:-.F
+M39LV;=JT:=/FPH4!1_#<NW?OWKU[]X[<NW?OR+U[]^[=NW?OWKU[]^X=N7?O
+MWKTA)$B0J&-J4;E$KCZ]>0/DS0QPB`Q](+.CQ8TL:++@0Q,B1(A=>_9LVF2I
+MS+\K7KP@0"!G7A1L__'BS5LR;TF\>/'BH8B'`@4*%/'B.4!!1Q>\)">BG8@6
+M[42T#-&B18L6+5JT>M&BU8L6+5JT:,JBU8M6KUZ]>O7JU:M7KUZ]>O7JU:M7
+MKYZE=)8LI;-DR9(E964(E"$0!N"">PM:H,&'!M^:"'O61(@084V$-1'P[?GU
+MZQ<^?/C6K(FP9E>$""'P#3C2QE^-&C7:M+EPH4V;"VW:M&G3IDV;-FTN_!EP
+MC\21>T?N';EW[]Z](_?NW1-S[]Z](_=(D+A'XMX]$B1(D+AW3\R.5\7*?9KQ
+M!@@0($"``'G3Q9&A2%1,X;F1!0V:+"$V;0JQ!\VN3<LRM8,AZH$7$0CBS?^+
+M,F_>DB78YL5;LB0>BG@H4*!`$2\>"A0CZ&3($.W$B6@GHD4[$2U:M"31ZD6+
+M%JU>M&CUHM6+IBR:LGKUHM5+5Z]>O7KUZM5+EZY>O7KI+*6S9*F>)08,&%B*
+M5H9`F04+1N&Y@08-/GP1]D2($&%7A%T1UD18$R$"OE^_\.'#!W#-FC5K(NR)
+M$`%?EB-M_-7P%Z#-A0L7+EQH<Z%-FS9M+K1I<^'"GRSW[MV[=^_>O7OWCMR[
+M=^_(O7OW[MV[1^+>/1+W2)"X=^\>B7MBZIA:5.X3/R!`@``!`@0($"`S9L2"
+M\(.*J2,W;H0($2+$IA"[-O0Q4F==)$2(^N7Q4@3_P;QX*%!\F8=BR9)X8Y9@
+M0X$B'@H4\<8XH",-7H8,&4Y$.Q$M6K1HT:)%BQ8M2;1ZT:+5BQ9-6;1HRNI%
+MJU>O7KUZ]>K5JU?/4KUZ]>K5JV>IGJ5T#"PQ8&")`0-E9<J,*K.@R8T0^/#M
+MB1`A0H1=>W;MV15A380U:R+@VX/O%[X]$=:L6;-K5X0($08<X>,/68T`;2Y<
+MN-#FPH4V%]JT`=CF0ILVT/[\^77DWI%[1^Z)N7?DWCTQ]^[=.W+OWI%[]TB0
+MN$?BWCT2)$C<(R%FAYMBKEX``0($"!`@0(```0($2"P+1()1D7"D1980(="@
+M01.BSX(=ZSX,^S3CS8Q4___H2)-S#0$*%"CBH8BW!`4V%/%0.(CG(!X*%'3H
+M9,@0[<2):">413L1+5JT>M'J18L6+5JT>M&B*:L735F]>O7JU:MGJ9ZE>I;J
+M6:I7KUZ]>O4L6;)DB0$#2Y886%)69D&8!4U"A-@5(4*$"'OV1(BP9\V>-7O6
+M1(@0(0*^/?CP_<*W)\*:-6O61(@0(<L1/OYJ<&MSX<*%"Q<NM+EPH4V;"VW:
+M7+CP!QB^>_?NW;MW[]Z]>_?NW;MWY-Z](_?N`;Q'XMX]$O=(D+A'XAX)$B3,
+M+"IGXH4F($"```$"!`@0($"`S.!GH=4/&5".W,ARXP8:-&B&F%KW(9&)&3.`
+M`/_ITBF.%R?21""0A@+!ER5+4#B(YP`%"A1C4*!`0<<)J@P93D0[<2):M&C1
+MHD6+%BU:M'K1ZD6+IBQ:O1/UZM6K5\]2.DOU+-6S5,]2/4O*+-6S5*]>.DOI
+M+#&PQ("!I66C%BQ#LRE$A`@1UD38LR9"A`B[]NR*$"'"F@@1UJS!AP\?OE^_
+M]D18LV97A%WXLI"#PH5+@`L7+ERX<.'"A0L7+K2Y`.T"M`O`?N$[<D_,D7M'
+MCMP[(N;>D7OWQ-R[=^\>B7LD[I&X1^(>"1(D2)#8,8M8.5?\@``!`@0($"!`
+M``(!`D03$$VQ++3Z084/GAM9T*!!P\G4HF)^3'29`>3_S8PW0&:DNG)'A`@O
+M(NC008%B"0H4*%"@0($"!0H4=.!ER!`MVHEHRJ*=4!:M7K1H]:*EBQ8MVHEZ
+MT>I%JU>O7KUZ]2S5LU3/4CU+&NI9LE3/DJ5ZEBQ9LF3)$@,&EGBD6["@"9I-
+MFR)$B!`A0H0(>_:LB1!A380(:_9$B+`&7X0U^/#]VH-O3X0(:]:LB1#A!CDH
+MR/RUN?#GPI\_?R[\N7"!'#ER;<A=N/`+WYI[1^[=$W/OWI%[]^X=N7?DWKTC
+M]^[=NW>/Q#T2]TC<(T&"!(DZM&!)2O0"B"8@0(```0($"#\@0(```6*!B!)5
+M$H[<N-'G5Q]:Z_R8,/%I!I`9_P"!``$"Y,T,1W%JZ1(A@LZ(+W3HH%B"`@4*
+M%$M0H)#F1%<&5!E.G(AV(EJT:-&B18L6+5JT>M'JG:AWHEZT>O7J6:IGJ9ZE
+M>I;J6;)4SY*E>I;JI;-DJ9ZE=`PL66)@R9*R!1K0;(JP*T*$-1$B[%D3(4*$
+M-6LB[%D380V^-1'61%B#;PV^/;_P18@0(<*:76L&,`$!`MJ%/W_^_+GPY\^?
+M/Q?(76A##MJ%/[\BK#ER[]Z1>_?$W#MR[\B]>V+NW;MW3\P]$B3ND;A'@@0)
+M$B2J#!&S8Q:Q2:[X`=$$!`@0($"`S`"B:0:0&3.(^(E$9D*+/BV.B'E5;%@7
+M<#/>`/\!`@0($"!`@`")U>G?G3LB1$BC@T(:"FDHZ"Q!@0(%'8`C4*'*$"W:
+MB1/1E$4[42]:M'K1ZD6+%DU9M'K1ZM6K5Z]>/4OU+-6S9,E2/4N6+&FP5,^2
+MI7KU+"E39DF9)4O*EBE;%F+7FCU[=JW9%2'"F@AKUD2($&'-&GQK\*V)$"%"
+MA#5K\*V)L`??'GP1(NQ:$V$`$S[0H/WY\^?/GS]__ORY0.X".7+0+EP8L&<-
+M@'M'[MT[<N_(O7MB[MT[<N_(O2/W[MV[=^\>B7LD[I$@48>$F#H[S'1(9(L?
+M$"!`@``!`@0($"!`@``!,L,1A`\26.#Q<&0'+6(_3'1Y`^3_S1L@0(```0($
+M"!`@,Q!1(G#G#AUITE#004$'!1T47^@X@9<A`ZH,)TY$BQ8M6K1HT:)%BQ:M
+M7K1ZT>I%JY<N&L!Z]>I9JF>IGH9ZENI9LE3/4CU+ENK5TU#/DC)ERI1IL+2@
+MQX(F>W9%B!!A380]:]9$6+,FPIH(:]9$6!-AS9HU$=9$6!-A#;XU>_;\VK,G
+MPIHU$?HP80+MSY\!?_[\^?/GSY\_%RZ0NT".W)\!$=8`('%/S#TQ]X[<.W)/
+MS)%[8NZ)N7=/S#T2)$B0P$."Q(0A1W:8>H6$6*)/_(```0($"!`@0(```0($
+M"!`@0&(1^>&BRI$C.V:Y*9;HQ9LW_T"```$"!`@0($"```$"!,B,0;5\B)!&
+MAPZ*+RA0T$%!1YH(7:A.G#AQXL2):">B18L6K5ZT=-'J):D7K5Z]:/72U:MG
+MJ9ZE>I;J6;)4SU(]2_4L64IGJ5Z]>AKJ:="P#*"&>U58F-(0(4*$-1$BK(D0
+M(<*:"+O6[(JP)L*:-6LBK,&W9DV$-6O6K(D0(<(>?/CPX<,7(<N1(\`&_!HP
+MX,^?/W]:_/ESY`(Y)A<N`/NU9@V`>V+N';DGYAZ)>T?ND;AWY!Z)>T?ND1A"
+M8@@)$B1(D"!1AQ8L8I-<O7@#!`@0($"```$"!`@0($!F``$RPUNK#Q*8X#E"
+MZU6'<B9>O/\!`@0($"!`@``!`@0($"!`@`"9T8R2CSO2$$BC0X>.-#IT1.C2
+MY</'B3(G3D2+%BU:M&C1HM6+5B]:O7KUZD6K5Z]>NGJ6ZM6S5,]2/4N6+-6S
+M5,]2O7KUZFFHIT&9,@W+FE39<<C4KPAK(NQ9$V'/F@AK(JR)$&'-FC5K(JR)
+M`'#-FC41UJQ9$V%-A#5KUD38@V]/!'SX!@`#-N#7@%]_@/WY\V?`GS\7+C"Y
+MP.3"@"QK```X<N_(/1+WCI`0<T_,/3'WCMP3<^\>B7M#2)`@08*$F`D[7A&;
+M%.0-$"!`@``!`@0($"!`^`'A!P3(#""QO"EA)F'"!%JSJ!!K]6G_!A`@0(``
+M`0($"!`@0(```0($"!`@0!`-\G'G#CPZ"!#004$'`1U=/C+X.''BQ(D3T:)%
+MJZ>L7K1Z]>I%JQ>M7KUZ]>K5JU?/4KUZENI92F>IGJ5ZEI35TU#/DC)E&I1I
+M:+)@`0E3$DRAB1`APIH(:R*LB1!A380U:R*LB;!F380U:R*L61-AS9HU:]:L
+MB1!AS9X]>_#AV_.KSP!\^+(,`#C@#[`_`_X,&/#G"#DF%X#]PK=F#0`2).Z)
+MN2>&Q+TC]TC<.W*/!(E[8NZ)N4>"!`D2)$B0F"!D4;E$+X```0($"!`@0(``
+M`3*#'S]^0/@!F<&/B!)55"1(<*.JG))/_R^```$"!`@0($"```$"!`@0($"`
+MO'D#!,@,0Y1\W*DE@@X=.BBDT=$%#Q6J$R>4G5"F[(2R:,JB*8M63UF]>O7J
+MU:M7KYZE>O7JU;-4KYXE99;J6;)4SY(E91HL:="@K(F&92WND3`E8<*>-1'6
+M1(BP)L*:"&LBK(FP9DV$-6O6K%FS9DV$-6O6K%FS)L*:-6LBK%D38<\>?/A^
+MX8N`#]^O`0.``0,V8,"`(Q>87!#SY]>:-0``'+DGYMZ1>V+N`21Q3\R1>R3$
+MW#MR[]X0$D-(D"!!8L*$':8Z3'+%#P@0($"```$"!`B0&?PL6)AA808_?K&\
+M*?'SX<.'<HE<F?]X\08($"!`@``!`@0($"!`@``!`@0($"!`@``!$BM0#Q]W
+M[M"A0X<.'3JH,J!"=>*$,F4GEBE3IDR9,F7*E"E3IJR>AGJ6+"FK5Z]>O7KU
+M+-6K5\^2)0V6-%C2H$&#,@U--#1ILNP>"5.F@$6($&%-A#41UD18$V%-A#41
+MUJQ9$V%-A#41UJQ9LV;-FC5KUJR)L&;-F@AK(N"+L`??G@@1\.'[-6#``&!_
+M@`'[PX0)DR/`?JU9`P#`/1+WCI`@<>_(/3'W2-P[<D_,/1)B[HFY1X+$$1)B
+M)NR@M6B2*R!```(!`@0($"!`@+SA]\+")PO\^,6:8<&;$@A*E"0:]NG_Q9LW
+M0(```0($"!`@0(```0($"!`@0(```0($"!`@0&8TLG;GSATZ=*31<0(/%2I4
+M)TZ<**-,F3)ERI0I4Z:LGC)ERI0ILZ1,0[UZZ>K52U?/4CU+EBPILZ1!F08-
+MRIHT:=*D29,F+4A,,$7K%[XU$2)$6!-A380U$=9$6!-A380U:]:L6;-FS9HU
+M:]:L6;-FS9HU$2*L6;,FPIHU:_!%P(<O`CY\6;(,&#``&+`C1Y@P^3,`WQH`
+M``"((7&/Q#TQ]\3<.W)/S#T2]X[<(W'OWCT2)$B0(#%!S`0A;B1]T@0$"!`@
+M0(```0+D#3\+G_A9X#<C%K]8WH9Y&S:LRXL9_P#?``$"!`@0($"```$"!`@0
+M($"```$"!`@0()J`:`("!`@01-;*W!%!1YHT7;I0H3J!ZH0R9<J6*5.FK)XR
+M9<J4*5.F3)DE91KJ*:M7KUZ]>O7J6;*D3(,E#1HT:+C19-F"%LN:-&G1@L0$
+M/B0BX-L38<V>-1'61(BP)L*:"&LBK%FS9LV:-6O6K%FS9LV:-6O6K%FS9LT:
+M?&LBK(D0`=\>?/@BX(N`#]^O+`,&``-VA,D1#[_PK5D#`,"](_?$W#MR[PB)
+M>T?NB;DGAL2]>V)(D!A"@@2)"23$B-GA1H^K%T"```$"!`@0($#XS7AA80:_
+M6!9F6.CB;=@P$UW>O/]Y\P8($"!`@``!`@0($"!`@``!`@0($"!`@``!`@0(
+M$(!`@`"9$:N?M3MW[MRY(P)5!E0G3IPXH4S9,F7*3BA3IDR9,F7*E"E39DF9
+MLGKUZM6K9\E2/0V6-&C0H$%#"`TM\"QHT:))BQ8M)DR@]6?-G@@1]JS9$R%"
+MA#41(JR)L&9-A#5KUJQ9LR;"FC5KUJQ9LV;-FC5K(JQ9$V%-A`AKUNS9@V\/
+MOC7X]N#+DJ4/,&!'F(CY\VL-@#5K`)"X)^;>D7LD[HDA08+$$1+WQ-PC<6\(
+MB7LD2$P@P63"A!VS.DQRQ0\($"!`@``!`@3(#$W\^`'AQR_6#&_>AGES!.[_
+MS1L@0(```0($"!`@0(```0($"!`@0(```0($"!`@0(```0($"!`@,V)1JN7C
+MSIT[/NXD.7$BV@EERI354Z9,&<!HRI0I4Z9,F3)ERI0IJU>O7CUE&NIIT*!!
+M0Y,0FRSM:G+CQHT6]_"T:-%B`A\2^"+@6Q-ASYH]:R)$B!`A0H0U$2*LB1!A
+M380U:]9$6+-FS9HU:]:LB;!F380U:R*L6;,&WQY\OW[]VH,O0H0(^&X,`(;G
+MR!$/OR*L6;,&P+TC]X[<$W/O"(E[8DB0N'>$A!@2]\20&$*"Q`028B8PH96@
+M0Z)/_(```0($"!`@0(```3*#7ZQ8L2Q8,.'-A(DN_S/>O`$"!`@0($"```$"
+M!`@0($"```$"!`@0($"```$"!`@0($"```$"9,:,?M;"]"!`@$`9'R?**#NA
+M3-D)9=&4*5.F3)DR9<J4*5.FS)(R2\HTU-.@08,&#4V4A=BT"6"$&S>RA+C1
+MH@6>%B0F3,"390V^/7LB[(D0(4*$"!$B1(@0(4*$"&LB1%@3(<*:-6O6K%FS
+M9LV:-6O6K%FS9LV:"&O61%BS9\^O7_CP1<"'+\LO8,#$`.OS*\*:-6O6B+E'
+M@@2)>V+ND1!S[\@]$B3ND;A'XAX)$B3$D"`Q@0F3'4B()7(%!`@0($"```$"
+M!`B_&?SX6;#@S9LW;R:Z=/\!]P8($"!`@``!`@0($"!`@``!`@0($"!`@``!
+M`@0($"!`@``!`@0($"!`@``!$JL9O3!E"/0H<T*9,F7*E"FK5T_9"67*RM13
+MILR2,DO*E&G0H$R#!@T:-#0)H:'%C4TA0N#+$@)?B!M'2."9,&%"E@CX\.V)
+ML&=/A#T1(NR)`##"G@@1(D2($"'"FCUK(D18$V'-FC5KUJQ9LV;-FC5KUJR)
+ML&;-FC5[]OSZ]>L7OCT1\.'[!0P8,&"_(JQ9LV;-O2/WQ-P[0H+$$1(D2)`0
+M0T+,/3$DAI`80H($"28DF.Q@@J2#*U?\@``!`@0($"!`9@"9P<\"$6^MO'D;
+M]JG_RYLW;X"\`0($"!`@0(```0($"!`@0(```0($"!`@0(```0($"!`@0(``
+M`0($"!`@0&;,0&1OV;)E)Y:56:;,4IEERI0MLV3)DC(-&I1IT&!)@P8-&C1H
+MT*`A1),0+4C@N9'E1H@L^/#AN]&"Q(0)$_#@BX`/WYX]>_;LB;!GSYX]>_;L
+MV;-G3X0($?9$V!,APIXU$2*L6;-FS9HU:]:L`;AFS9H(:]:L61-ASYY?OW[]
+MPH<O0H1?OX`!^X5O3X0(:]8<N7?OR#T2]\3<(W%/S+TC]TB0N'>/Q!`2)$A,
+M.#*!"9,=LR1-<O4&"!`@0(```0($"!!-L2QX:S5LV+!/_UUFO`$"!`@0($"`
+M``$"!`@0($"```$"!`@0($"```$"!`@0($"`O`$"!`@0($"`S``"!`@0(+$0
+M10I$8<&R9<N6*5.F0=DR9<N6:="@08,&#1HT:-#01T.?&S<TW+AQC\6$%C>R
+MX,-W`Q^^$#=:3&`QH44(?'LB[-FS9\^>"'LB[-D384^$/7OV[-FS9\^>"!$B
+M1(@08<V>-6O6K%FS9LV:-6O6K%FS9LV:-1$B_/KUZ]<O?/CPX</WZ]>O7Q'6
+M`%RS9LT],?=(W!-#@L0],22.D"!Q[PB)>R2&D"!!XL@$,1/$,&$RJX.K3_R`
+M``$"!`@0($"```'"SX*W5DJ4#/\S`>X-$"!`@``!`@0($"!`@``!`@0($"!`
+M@``!`@0($"!`@``!`@0($"!`@``!`@0($"!`W@`!`@0(D!F.B$0*1(_"O04+
+M-%@*H2&$!@T:-#31H*%)DR9-;C1I<N/&C1LD^$QH<2-$%GSX;MRXD>7&A`E'
+M;J"Y@6;/GCU[]NS9LV=/A`A[]NS9LV?/GCU[]NS9LV?/GCT1]D2($`'?FC5K
+MUJQ9LV;-FC5KUJQ9LV9-!'Q9?OW*D@4?OBR_?OWZ%0'?F@AK[MT[<D\,B2,D
+MQ-PC<8^$&!+W[I&X1V(("1(D`))@,H$)$R9()"6R]08($"!`@``!`@0($'X6
+M++2"H$3_R;!A7=Z\`0($"!`@0(```0($"!`@0(```0($"!`@0(```0($"!`@
+M0(```0($"!`@0(```0($"!`@0(```0($")`9,V;$FH%(PH)E330T:=*DB88F
+M39K<:'*CR8T;-V[<:'&$1(LL6;+@NY'E1I80-UJ0(+&@18L;-T+@V[-GSYX]
+M>_;LV;-GSYX]>_;LV;-GSYX]>_;LV;-GSYX]$2)$B+!FS9HU:]:L6;-FS9H(
+M:]:LP9?E5Y9?6;+@R_+KUR]\$2*L6;,&SY%[1^Z1(''O"`DQ),3<$T/BGA@2
+M0X[4(4'B"`DQ3)@P02+)U0L@0(```0($"!`@0(#$LN`-@A(__P#+^1GVZ0T0
+M($"```$"!`@0($"```$"!`@0($"```$"!`@0($"```$"!`@0($"```$"!`@0
+M($"```$"!`@0($"```$"!,B;&8[(+`MQ0T.3)DUN-&G2I$F3&TUNW+AQX\:-
+M&\!:9,&7)<N-+#=NW+C1@@0)/"WPX&EQX\:>7WM^[<&W9\^>/7OV[,&WY]>>
+M/7OV[-FS9\^>/7OV[-FS9\^>"'LB1%BS9LV:-6O6K%FS9LV:"/BR_,J2)4N6
+M+%E^9?F%+T*$-1&.'#ER1,P1$B1('+EW[QZ)>R1(D"!!@L0],21(,#DRH8ZO
+M#HI<O=`$!`@0($"``)DQ(Q8_"\.&^?_Y\*&<'Q/@W@`!`@0($"!`@``!`@0(
+M$"!`@``!`@0($(!`@``!`@0($"!`@``!`@0($"!`@``!`@0($"!`@``!`@0(
+M$"!`@``!$LO4C29-;MQH<J/)C1LW;MRX<>/&C1LWLMS(D@5?EALWLK1H<2-+
+M"SQ'6K1HT0)/BR8M;J!!$V+/GCU[]NS9LV</OCWX]OS:LV?/GCU[]NSYM6?/
+MKSV_?NWY%6'/'GQK(JR)$&$-/GSXL@S(,B#+@"R_?F7Y-6#`@%^_UD18L^;(
+MD2-BCAP1(X8$B2,DQ)`@08($"3$D2)`@(>8("3%,F-#JD,@5OS=`@``!`@3(
+M#"`S+%CPIL3_SX</'XKY,0'N#1`@0(```0($"!`@0(```0($"!`@0(```0($
+M"!`@0(```0($"!`@0-[,`/<&"!`@0(```0($"$`@0(```0($R`P@1"3<N''C
+MQHTF-VZT:'*CQ8T;36X,N'$CRX`;-[+<R'+CQHT!+5H<:=&B28L6+9JT:-&G
+MQ8T;-T*@0;-GSYX]>_;L^84/WYX]^/;LV;/GUYX]>W[MV;/GUYY?OW[AVX-O
+MSYX]>R+@RS+@SY\+?_X,^/4KRZ\!P(#]&9`ERYHU:XX<.7+D"(D)1TB0($&"
+M!`D2)$B0($%"S)`C)$@<F<"$UJP.DUR]``($"!`@0/C-B&7!VS`(_S\^?/@0
+MR<\P$^#>``$"!`@0($"```$"!`@0($"```$"!`@0($"```$"!`@0($"```'R
+MIHL)1S.```$"!`@0($"```$"!`@0($"``"%BZH:&&S>:W&ARX\:-&S=NW+C1
+M`N"-&UENW,B2Y4:6&RT&M&A!SM2$%C=NW+AQXT:+&RV:-+EQXT:($'M^[=FS
+M!]^>/?CP[?FU9P^^/;_V[/FU9\^>7[_V_/JUY]>O7WM^[?FU!U^6+'\NM&ES
+MX<^`7UGP_1H`[,\?8`-^K5FSYLB1(V*.,!$S0<P$$B1(D"!1AP0),4/$W"-!
+MXHB8(V)H)4`BR=4G?D"`:`+";P8_;\.4*/_Q\^%')#_#3'QZ\^8-$"!`@``!
+M`@0($"!`@``!`@0($"!`@``!`@0($"!`@``!`@0($"!`NCCJ\@8($"!`@``!
+M`@0($"!`@``!`@0(D%BF;MQH<N-&DQLMFMQH<>/&C1M9;MRX,>#&@!M96@QH
+MT8(<'PDN_$WXT^+&C1LW;MQH`K!%BR8W;MSXA6;/GCU[]N#;@V_/KSU[]NS9
+ML^?7GCU[?NWYM>?7AE^_?NWYM6?/KSU[\&49\.?"A0L7_OSZA2]"EE]_//SY
+M,P`?O@@1CAPY<N0(B0E')I"H0X($"1(D2)`@<>2>&!)B2!P1PV0'""0=$KG2
+M!`3(&WXS+'AKI430R8\/'_SX&=:ERYLW0(```0($"!`@0(```0($"!`@0(``
+M`0($"!`@0(```0($"!`@0(```0)DQHP9;X```0($"!`@0(```0($"!`@,X``
+MB67J1I,;36XTN='D1I,;-V[<N''CQH`;-P;<&-"B18LC)/RYD$'%A80)1V[<
+MN''CQHT;36XTN7'C!AHT:/;LV8,/'SY\>_;\VH-OSZ\]>_;\`KAGSYY?>W[]
+JVO-KSZ\]>_;LV;-G#[X!?RY<N/!GP"]\:_#ARS+@SQ%@`WZM6;,F(``[
+`
+end
--- /dev/null
+++ jpeg-6b/ltconfig.new
@@ -0,0 +1,3017 @@
+#! /bin/sh
+
+# ltconfig - Create a system-specific libtool.
+# Copyright (C) 1996-1999 Free Software Foundation, Inc.
+# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
+#
+# This file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# A lot of this script is taken from autoconf-2.10.
+
+# Check that we are running under the correct shell.
+SHELL=${CONFIG_SHELL-/bin/sh}
+echo=echo
+if test "X$1" = X--no-reexec; then
+  # Discard the --no-reexec flag, and continue.
+  shift
+elif test "X$1" = X--fallback-echo; then
+  # Avoid inline document here, it may be left over
+  :
+elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then
+  # Yippee, $echo works!
+  :
+else
+  # Restart under the correct shell.
+  exec "$SHELL" "$0" --no-reexec ${1+"$@"}
+fi
+
+if test "X$1" = X--fallback-echo; then
+  # used as fallback echo
+  shift
+  cat <<EOF
+$*
+EOF
+  exit 0
+fi
+
+# Find the correct PATH separator.  Usually this is `:', but
+# DJGPP uses `;' like DOS.
+if test "X${PATH_SEPARATOR+set}" != "Xset"; then
+  UNAME=${UNAME-`uname 2>/dev/null`}
+  case X$UNAME in
+    *-DOS) PATH_SEPARATOR=';' ;;
+    *)     PATH_SEPARATOR=':' ;;
+  esac
+fi
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+if test "${CDPATH+set}" = set; then CDPATH=; export CDPATH; fi
+
+if test "X${echo_test_string+set}" != "Xset"; then
+  # find a string as large as possible, as long as the shell can cope with it
+  for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do
+    # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
+    if (echo_test_string="`eval $cmd`") 2>/dev/null &&
+       echo_test_string="`eval $cmd`" &&
+       (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null; then
+      break
+    fi
+  done
+fi
+
+if test "X`($echo '\t') 2>/dev/null`" != 'X\t' ||
+   test "X`($echo "$echo_test_string") 2>/dev/null`" != X"$echo_test_string"; then
+  # The Solaris, AIX, and Digital Unix default echo programs unquote
+  # backslashes.  This makes it impossible to quote backslashes using
+  #   echo "$something" | sed 's/\\/\\\\/g'
+  #
+  # So, first we look for a working echo in the user's PATH.
+
+  IFS="${IFS= 	}"; save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR}"
+  for dir in $PATH /usr/ucb; do
+    if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
+       test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
+       test "X`($dir/echo "$echo_test_string") 2>/dev/null`" = X"$echo_test_string"; then
+      echo="$dir/echo"
+      break
+    fi
+  done
+  IFS="$save_ifs"
+
+  if test "X$echo" = Xecho; then
+    # We didn't find a better echo, so look for alternatives.
+    if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' &&
+       test "X`(print -r "$echo_test_string") 2>/dev/null`" = X"$echo_test_string"; then
+      # This shell has a builtin print -r that does the trick.
+      echo='print -r'
+    elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) &&
+	 test "X$CONFIG_SHELL" != X/bin/ksh; then
+      # If we have ksh, try running ltconfig again with it.
+      ORIGINAL_CONFIG_SHELL="${CONFIG_SHELL-/bin/sh}"
+      export ORIGINAL_CONFIG_SHELL
+      CONFIG_SHELL=/bin/ksh
+      export CONFIG_SHELL
+      exec "$CONFIG_SHELL" "$0" --no-reexec ${1+"$@"}
+    else
+      # Try using printf.
+      echo='printf "%s\n"'
+      if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
+	 test "X`($echo "$echo_test_string") 2>/dev/null`" = X"$echo_test_string"; then
+	# Cool, printf works
+	:
+      elif test "X`("$ORIGINAL_CONFIG_SHELL" "$0" --fallback-echo '\t') 2>/dev/null`" = 'X\t' &&
+	   test "X`("$ORIGINAL_CONFIG_SHELL" "$0" --fallback-echo "$echo_test_string") 2>/dev/null`" = X"$echo_test_string"; then
+	CONFIG_SHELL="$ORIGINAL_CONFIG_SHELL"
+	export CONFIG_SHELL
+	SHELL="$CONFIG_SHELL"
+	export SHELL
+	echo="$CONFIG_SHELL $0 --fallback-echo"
+      elif test "X`("$CONFIG_SHELL" "$0" --fallback-echo '\t') 2>/dev/null`" = 'X\t' &&
+	   test "X`("$CONFIG_SHELL" "$0" --fallback-echo "$echo_test_string") 2>/dev/null`" = X"$echo_test_string"; then
+	echo="$CONFIG_SHELL $0 --fallback-echo"
+      else
+	# maybe with a smaller string...
+	prev=:
+
+	for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do
+	  if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null; then
+	    break
+	  fi
+	  prev="$cmd"
+	done
+
+	if test "$prev" != 'sed 50q "$0"'; then
+	  echo_test_string=`eval $prev`
+	  export echo_test_string
+	  exec "${ORIGINAL_CONFIG_SHELL}" "$0" ${1+"$@"}
+	else
+	  # Oops.  We lost completely, so just stick with echo.
+	  echo=echo
+	fi
+      fi
+    fi
+  fi
+fi
+
+# Sed substitution that helps us do robust quoting.  It backslashifies
+# metacharacters that are still active within double-quoted strings.
+Xsed='sed -e s/^X//'
+sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g'
+
+# Same as above, but do not quote variable references.
+double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g'
+
+# Sed substitution to delay expansion of an escaped shell variable in a
+# double_quote_subst'ed string.
+delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
+
+# The name of this program.
+progname=`$echo "X$0" | $Xsed -e 's%^.*/%%'`
+
+# Constants:
+PROGRAM=ltconfig
+PACKAGE=libtool
+VERSION=1.3.3
+TIMESTAMP=" (1.385.2.181 1999/07/02 15:49:11)"
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.c 1>&5'
+ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.c $LIBS 1>&5'
+rm="rm -f"
+
+help="Try \`$progname --help' for more information."
+
+# Global variables:
+default_ofile=libtool
+can_build_shared=yes
+enable_shared=yes
+# All known linkers require a `.a' archive for static linking (except M$VC,
+# which needs '.lib').
+enable_static=yes
+enable_fast_install=yes
+enable_dlopen=unknown
+enable_win32_dll=no
+ltmain=
+silent=
+srcdir=
+ac_config_guess=
+ac_config_sub=
+host=
+nonopt=
+ofile="$default_ofile"
+verify_host=yes
+with_gcc=no
+with_gnu_ld=no
+need_locks=yes
+ac_ext=c
+objext=o
+libext=a
+exeext=
+cache_file=
+
+old_AR="$AR"
+old_CC="$CC"
+old_CFLAGS="$CFLAGS"
+old_CPPFLAGS="$CPPFLAGS"
+old_LDFLAGS="$LDFLAGS"
+old_LD="$LD"
+old_LN_S="$LN_S"
+old_LIBS="$LIBS"
+old_NM="$NM"
+old_RANLIB="$RANLIB"
+old_DLLTOOL="$DLLTOOL"
+old_OBJDUMP="$OBJDUMP"
+old_AS="$AS"
+
+# Parse the command line options.
+args=
+prev=
+for option
+do
+  case "$option" in
+  -*=*) optarg=`echo "$option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
+  *) optarg= ;;
+  esac
+
+  # If the previous option needs an argument, assign it.
+  if test -n "$prev"; then
+    eval "$prev=\$option"
+    prev=
+    continue
+  fi
+
+  case "$option" in
+  --help) cat <<EOM
+Usage: $progname [OPTION]... [HOST [LTMAIN]]
+
+Generate a system-specific libtool script.
+
+    --debug                enable verbose shell tracing
+    --disable-shared       do not build shared libraries
+    --disable-static       do not build static libraries
+    --disable-fast-install do not optimize for fast installation
+    --enable-dlopen        enable dlopen support
+    --enable-win32-dll     enable building dlls on win32 hosts
+    --help                 display this help and exit
+    --no-verify            do not verify that HOST is a valid host type
+-o, --output=FILE          specify the output file [default=$default_ofile]
+    --quiet                same as \`--silent'
+    --silent               do not print informational messages
+    --srcdir=DIR           find \`config.guess' in DIR
+    --version              output version information and exit
+    --with-gcc             assume that the GNU C compiler will be used
+    --with-gnu-ld          assume that the C compiler uses the GNU linker
+    --disable-lock         disable file locking
+    --cache-file=FILE      configure cache file
+
+LTMAIN is the \`ltmain.sh' shell script fragment or \`ltmain.c' program
+that provides basic libtool functionality.
+
+HOST is the canonical host system name [default=guessed].
+EOM
+  exit 0
+  ;;
+
+  --debug)
+    echo "$progname: enabling shell trace mode"
+    set -x
+    ;;
+
+  --disable-shared) enable_shared=no ;;
+
+  --disable-static) enable_static=no ;;
+
+  --disable-fast-install) enable_fast_install=no ;;
+
+  --enable-dlopen) enable_dlopen=yes ;;
+
+  --enable-win32-dll) enable_win32_dll=yes ;;
+
+  --quiet | --silent) silent=yes ;;
+
+  --srcdir) prev=srcdir ;;
+  --srcdir=*) srcdir="$optarg" ;;
+
+  --no-verify) verify_host=no ;;
+
+  --output | -o) prev=ofile ;;
+  --output=*) ofile="$optarg" ;;
+
+  --version) echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP"; exit 0 ;;
+
+  --with-gcc) with_gcc=yes ;;
+  --with-gnu-ld) with_gnu_ld=yes ;;
+
+  --disable-lock) need_locks=no ;;
+
+  --cache-file=*) cache_file="$optarg" ;;
+
+  -*)
+    echo "$progname: unrecognized option \`$option'" 1>&2
+    echo "$help" 1>&2
+    exit 1
+    ;;
+
+  *)
+    if test -z "$ltmain"; then
+      ltmain="$option"
+    elif test -z "$host"; then
+# This generates an unnecessary warning for sparc-sun-solaris4.1.3_U1
+#      if test -n "`echo $option| sed 's/[-a-z0-9.]//g'`"; then
+#        echo "$progname: warning \`$option' is not a valid host type" 1>&2
+#      fi
+      host="$option"
+    else
+      echo "$progname: too many arguments" 1>&2
+      echo "$help" 1>&2
+      exit 1
+    fi ;;
+  esac
+done
+
+if test -z "$ltmain"; then
+  echo "$progname: you must specify a LTMAIN file" 1>&2
+  echo "$help" 1>&2
+  exit 1
+fi
+
+if test ! -f "$ltmain"; then
+  echo "$progname: \`$ltmain' does not exist" 1>&2
+  echo "$help" 1>&2
+  exit 1
+fi
+
+# Quote any args containing shell metacharacters.
+ltconfig_args=
+for arg
+do
+  case "$arg" in
+  *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
+  ltconfig_args="$ltconfig_args '$arg'" ;;
+  *) ltconfig_args="$ltconfig_args $arg" ;;
+  esac
+done
+
+# A relevant subset of AC_INIT.
+
+# File descriptor usage:
+# 0 standard input
+# 1 file creation
+# 2 errors and warnings
+# 3 some systems may open it to /dev/tty
+# 4 used on the Kubota Titan
+# 5 compiler messages saved in config.log
+# 6 checking for... messages and results
+if test "$silent" = yes; then
+  exec 6>/dev/null
+else
+  exec 6>&1
+fi
+exec 5>>./config.log
+
+# NLS nuisances.
+# Only set LANG and LC_ALL to C if already set.
+# These must not be set unconditionally because not all systems understand
+# e.g. LANG=C (notably SCO).
+if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
+if test "${LANG+set}"   = set; then LANG=C;   export LANG;   fi
+
+if test -n "$cache_file" && test -r "$cache_file"; then
+  echo "loading cache $cache_file within ltconfig"
+  . $cache_file
+fi
+
+if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
+  # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
+  if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
+    ac_n= ac_c='
+' ac_t='	'
+  else
+    ac_n=-n ac_c= ac_t=
+  fi
+else
+  ac_n= ac_c='\c' ac_t=
+fi
+
+if test -z "$srcdir"; then
+  # Assume the source directory is the same one as the path to LTMAIN.
+  srcdir=`$echo "X$ltmain" | $Xsed -e 's%/[^/]*$%%'`
+  test "$srcdir" = "$ltmain" && srcdir=.
+fi
+
+trap "$rm conftest*; exit 1" 1 2 15
+if test "$verify_host" = yes; then
+  # Check for config.guess and config.sub.
+  ac_aux_dir=
+  for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
+    if test -f $ac_dir/config.guess; then
+      ac_aux_dir=$ac_dir
+      break
+    fi
+  done
+  if test -z "$ac_aux_dir"; then
+    echo "$progname: cannot find config.guess in $srcdir $srcdir/.. $srcdir/../.." 1>&2
+    echo "$help" 1>&2
+    exit 1
+  fi
+  ac_config_guess=$ac_aux_dir/config.guess
+  ac_config_sub=$ac_aux_dir/config.sub
+
+  # Make sure we can run config.sub.
+  if $SHELL $ac_config_sub sun4 >/dev/null 2>&1; then :
+  else
+    echo "$progname: cannot run $ac_config_sub" 1>&2
+    echo "$help" 1>&2
+    exit 1
+  fi
+
+  echo $ac_n "checking host system type""... $ac_c" 1>&6
+
+  host_alias=$host
+  case "$host_alias" in
+  "")
+    if host_alias=`$SHELL $ac_config_guess`; then :
+    else
+      echo "$progname: cannot guess host type; you must specify one" 1>&2
+      echo "$help" 1>&2
+      exit 1
+    fi ;;
+  esac
+  host=`$SHELL $ac_config_sub $host_alias`
+  echo "$ac_t$host" 1>&6
+
+  # Make sure the host verified.
+  test -z "$host" && exit 1
+
+elif test -z "$host"; then
+  echo "$progname: you must specify a host type if you use \`--no-verify'" 1>&2
+  echo "$help" 1>&2
+  exit 1
+else
+  host_alias=$host
+fi
+
+# Transform linux* to *-*-linux-gnu*, to support old configure scripts.
+case "$host_os" in
+linux-gnu*) ;;
+linux*) host=`echo $host | sed 's/^\(.*-.*-linux\)\(.*\)$/\1-gnu\2/'`
+esac
+
+host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+
+case "$host_os" in
+aix3*)
+  # AIX sometimes has problems with the GCC collect2 program.  For some
+  # reason, if we set the COLLECT_NAMES environment variable, the problems
+  # vanish in a puff of smoke.
+  if test "${COLLECT_NAMES+set}" != set; then
+    COLLECT_NAMES=
+    export COLLECT_NAMES
+  fi
+  ;;
+esac
+
+# Determine commands to create old-style static archives.
+old_archive_cmds='$AR cru $oldlib$oldobjs'
+old_postinstall_cmds='chmod 644 $oldlib'
+old_postuninstall_cmds=
+
+# Set a sane default for `AR'.
+test -z "$AR" && AR=ar
+
+# Set a sane default for `OBJDUMP'.
+test -z "$OBJDUMP" && OBJDUMP=objdump
+
+# If RANLIB is not set, then run the test.
+if test "${RANLIB+set}" != "set"; then
+  result=no
+
+  echo $ac_n "checking for ranlib... $ac_c" 1>&6
+  IFS="${IFS= 	}"; save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR}"
+  for dir in $PATH; do
+    test -z "$dir" && dir=.
+    if test -f $dir/ranlib || test -f $dir/ranlib$ac_exeext; then
+      RANLIB="ranlib"
+      result="ranlib"
+      break
+    fi
+  done
+  IFS="$save_ifs"
+
+  echo "$ac_t$result" 1>&6
+fi
+
+if test -n "$RANLIB"; then
+  old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
+  old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds"
+fi
+
+# Set sane defaults for `DLLTOOL', `OBJDUMP', and `AS', used on cygwin.
+test -z "$DLLTOOL" && DLLTOOL=dlltool
+test -z "$OBJDUMP" && OBJDUMP=objdump
+test -z "$AS" && AS=as
+
+# Check to see if we are using GCC.
+if test "$with_gcc" != yes || test -z "$CC"; then
+  # If CC is not set, then try to find GCC or a usable CC.
+  if test -z "$CC"; then
+    echo $ac_n "checking for gcc... $ac_c" 1>&6
+    IFS="${IFS= 	}"; save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR}"
+    for dir in $PATH; do
+      test -z "$dir" && dir=.
+      if test -f $dir/gcc || test -f $dir/gcc$ac_exeext; then
+	CC="gcc"
+	break
+      fi
+    done
+    IFS="$save_ifs"
+
+    if test -n "$CC"; then
+      echo "$ac_t$CC" 1>&6
+    else
+      echo "$ac_t"no 1>&6
+    fi
+  fi
+
+  # Not "gcc", so try "cc", rejecting "/usr/ucb/cc".
+  if test -z "$CC"; then
+    echo $ac_n "checking for cc... $ac_c" 1>&6
+    IFS="${IFS= 	}"; save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR}"
+    cc_rejected=no
+    for dir in $PATH; do
+      test -z "$dir" && dir=.
+      if test -f $dir/cc || test -f $dir/cc$ac_exeext; then
+	if test "$dir/cc" = "/usr/ucb/cc"; then
+	  cc_rejected=yes
+	  continue
+	fi
+	CC="cc"
+	break
+      fi
+    done
+    IFS="$save_ifs"
+    if test $cc_rejected = yes; then
+      # We found a bogon in the path, so make sure we never use it.
+      set dummy $CC
+      shift
+      if test $# -gt 0; then
+	# We chose a different compiler from the bogus one.
+	# However, it has the same name, so the bogon will be chosen
+	# first if we set CC to just the name; use the full file name.
+	shift
+	set dummy "$dir/cc" "$@"
+	shift
+	CC="$@"
+      fi
+    fi
+
+    if test -n "$CC"; then
+      echo "$ac_t$CC" 1>&6
+    else
+      echo "$ac_t"no 1>&6
+    fi
+
+    if test -z "$CC"; then
+      echo "$progname: error: no acceptable cc found in \$PATH" 1>&2
+      exit 1
+    fi
+  fi
+
+  # Now see if the compiler is really GCC.
+  with_gcc=no
+  echo $ac_n "checking whether we are using GNU C... $ac_c" 1>&6
+  echo "$progname:581: checking whether we are using GNU C" >&5
+
+  $rm conftest.c
+  cat > conftest.c <<EOF
+#ifdef __GNUC__
+  yes;
+#endif
+EOF
+  if { ac_try='${CC-cc} -E conftest.c'; { (eval echo $progname:589: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+    with_gcc=yes
+  fi
+  $rm conftest.c
+  echo "$ac_t$with_gcc" 1>&6
+fi
+
+# Allow CC to be a program name with arguments.
+set dummy $CC
+compiler="$2"
+
+echo $ac_n "checking for object suffix... $ac_c" 1>&6
+$rm conftest*
+echo 'int i = 1;' > conftest.c
+echo "$progname:603: checking for object suffix" >& 5
+if { (eval echo $progname:604: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>conftest.err; }; then
+  # Append any warnings to the config.log.
+  cat conftest.err 1>&5
+
+  for ac_file in conftest.*; do
+    case $ac_file in
+    *.c) ;;
+    *) objext=`echo $ac_file | sed -e s/conftest.//` ;;
+    esac
+  done
+else
+  cat conftest.err 1>&5
+  echo "$progname: failed program was:" >&5
+  cat conftest.c >&5
+fi
+$rm conftest*
+echo "$ac_t$objext" 1>&6
+
+echo $ac_n "checking for executable suffix... $ac_c" 1>&6
+if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  ac_cv_exeext="no"
+  $rm conftest*
+  echo 'main () { return 0; }' > conftest.c
+  echo "$progname:629: checking for executable suffix" >& 5
+  if { (eval echo $progname:630: \"$ac_link\") 1>&5; (eval $ac_link) 2>conftest.err; }; then
+    # Append any warnings to the config.log.
+    cat conftest.err 1>&5
+
+    for ac_file in conftest.*; do
+      case $ac_file in
+      *.c | *.err | *.$objext ) ;;
+      *) ac_cv_exeext=.`echo $ac_file | sed -e s/conftest.//` ;;
+      esac
+    done
+  else
+    cat conftest.err 1>&5
+    echo "$progname: failed program was:" >&5
+    cat conftest.c >&5
+  fi
+  $rm conftest*
+fi
+if test "X$ac_cv_exeext" = Xno; then
+  exeext=""
+else
+  exeext="$ac_cv_exeext"
+fi
+echo "$ac_t$ac_cv_exeext" 1>&6
+
+echo $ac_n "checking for $compiler option to produce PIC... $ac_c" 1>&6
+pic_flag=
+special_shlib_compile_flags=
+wl=
+link_static_flag=
+no_builtin_flag=
+
+if test "$with_gcc" = yes; then
+  wl='-Wl,'
+  link_static_flag='-static'
+
+  case "$host_os" in
+  beos* | irix5* | irix6* | osf3* | osf4*)
+    # PIC is the default for these OSes.
+    ;;
+  aix*)
+    # Below there is a dirty hack to force normal static linking with -ldl
+    # The problem is because libdl dynamically linked with both libc and
+    # libC (AIX C++ library), which obviously doesn't included in libraries
+    # list by gcc. This cause undefined symbols with -static flags.
+    # This hack allows C programs to be linked with "-static -ldl", but
+    # we not sure about C++ programs.
+    link_static_flag="$link_static_flag ${wl}-lC"
+    ;;
+  cygwin* | mingw* | os2*)
+    # We can build DLLs from non-PIC.
+    ;;
+  amigaos*)
+    # FIXME: we need at least 68020 code to build shared libraries, but
+    # adding the `-m68020' flag to GCC prevents building anything better,
+    # like `-m68040'.
+    pic_flag='-m68020 -resident32 -malways-restore-a4'
+    ;;
+  sysv4*MP*)
+    if test -d /usr/nec; then
+       pic_flag=-Kconform_pic
+    fi
+    ;;
+  *)
+    pic_flag='-fPIC'
+    ;;
+  esac
+else
+  # PORTME Check for PIC flags for the system compiler.
+  case "$host_os" in
+  aix3* | aix4*)
+    # All AIX code is PIC.
+    link_static_flag='-bnso -bI:/lib/syscalls.exp'
+    ;;
+
+  hpux9* | hpux10* | hpux11*)
+    # Is there a better link_static_flag that works with the bundled CC?
+    wl='-Wl,'
+    link_static_flag="${wl}-a ${wl}archive"
+    pic_flag='+Z'
+    ;;
+
+  irix5* | irix6*)
+    wl='-Wl,'
+    link_static_flag='-non_shared'
+    # PIC (with -KPIC) is the default.
+    ;;
+
+  cygwin* | mingw* | os2*)
+    # We can build DLLs from non-PIC.
+    ;;
+
+  osf3* | osf4*)
+    # All OSF/1 code is PIC.
+    wl='-Wl,'
+    link_static_flag='-non_shared'
+    ;;
+
+  sco3.2v5*)
+    pic_flag='-Kpic'
+    link_static_flag='-dn'
+    special_shlib_compile_flags='-belf'
+    ;;
+
+  solaris*)
+    pic_flag='-KPIC'
+    link_static_flag='-Bstatic'
+    wl='-Wl,'
+    ;;
+
+  sunos4*)
+    pic_flag='-PIC'
+    link_static_flag='-Bstatic'
+    wl='-Qoption ld '
+    ;;
+
+  sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+    pic_flag='-KPIC'
+    link_static_flag='-Bstatic'
+    wl='-Wl,'
+    ;;
+
+  uts4*)
+    pic_flag='-pic'
+    link_static_flag='-Bstatic'
+    ;;
+  sysv4*MP*)
+    if test -d /usr/nec ;then
+      pic_flag='-Kconform_pic'
+      link_static_flag='-Bstatic'
+    fi
+    ;;
+  *)
+    can_build_shared=no
+    ;;
+  esac
+fi
+
+if test -n "$pic_flag"; then
+  echo "$ac_t$pic_flag" 1>&6
+
+  # Check to make sure the pic_flag actually works.
+  echo $ac_n "checking if $compiler PIC flag $pic_flag works... $ac_c" 1>&6
+  $rm conftest*
+  echo "int some_variable = 0;" > conftest.c
+  save_CFLAGS="$CFLAGS"
+  CFLAGS="$CFLAGS $pic_flag -DPIC"
+  echo "$progname:776: checking if $compiler PIC flag $pic_flag works" >&5
+  if { (eval echo $progname:777: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>conftest.err; } && test -s conftest.$objext; then
+    # Append any warnings to the config.log.
+    cat conftest.err 1>&5
+    
+    case "$host_os" in
+    hpux9* | hpux10* | hpux11*)
+      # On HP-UX, both CC and GCC only warn that PIC is supported... then they
+      # create non-PIC objects.  So, if there were any warnings, we assume that
+      # PIC is not supported.
+      if test -s conftest.err; then
+	echo "$ac_t"no 1>&6
+	can_build_shared=no
+	pic_flag=
+      else
+	echo "$ac_t"yes 1>&6
+	pic_flag=" $pic_flag"
+      fi
+      ;;
+    *)
+      echo "$ac_t"yes 1>&6
+      pic_flag=" $pic_flag"
+      ;;
+    esac
+  else
+    # Append any errors to the config.log.
+    cat conftest.err 1>&5
+    can_build_shared=no
+    pic_flag=
+    echo "$ac_t"no 1>&6
+  fi
+  CFLAGS="$save_CFLAGS"
+  $rm conftest*
+else
+  echo "$ac_t"none 1>&6
+fi
+
+# Check to see if options -o and -c are simultaneously supported by compiler
+echo $ac_n "checking if $compiler supports -c -o file.o... $ac_c" 1>&6
+$rm -r conftest 2>/dev/null
+mkdir conftest
+cd conftest
+$rm conftest*
+echo "int some_variable = 0;" > conftest.c
+mkdir out
+# According to Tom Tromey, Ian Lance Taylor reported there are C compilers
+# that will create temporary files in the current directory regardless of
+# the output directory.  Thus, making CWD read-only will cause this test
+# to fail, enabling locking or at least warning the user not to do parallel
+# builds.
+chmod -w .
+save_CFLAGS="$CFLAGS"
+CFLAGS="$CFLAGS -o out/conftest2.o"
+echo "$progname:829: checking if $compiler supports -c -o file.o" >&5
+if { (eval echo $progname:830: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>out/conftest.err; } && test -s out/conftest2.o; then
+
+  # The compiler can only warn and ignore the option if not recognized
+  # So say no if there are warnings
+    if test -s out/conftest.err; then
+      echo "$ac_t"no 1>&6
+      compiler_c_o=no
+    else
+      echo "$ac_t"yes 1>&6
+      compiler_c_o=yes
+    fi
+else
+  # Append any errors to the config.log.
+  cat out/conftest.err 1>&5
+  compiler_c_o=no
+  echo "$ac_t"no 1>&6
+fi
+CFLAGS="$save_CFLAGS"
+chmod u+w .
+$rm conftest* out/*
+rmdir out
+cd ..
+rmdir conftest
+$rm -r conftest 2>/dev/null
+
+if test x"$compiler_c_o" = x"yes"; then
+  # Check to see if we can write to a .lo
+  echo $ac_n "checking if $compiler supports -c -o file.lo... $ac_c" 1>&6
+  $rm conftest*
+  echo "int some_variable = 0;" > conftest.c
+  save_CFLAGS="$CFLAGS"
+  CFLAGS="$CFLAGS -c -o conftest.lo"
+  echo "$progname:862: checking if $compiler supports -c -o file.lo" >&5
+if { (eval echo $progname:863: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>conftest.err; } && test -s conftest.lo; then
+
+    # The compiler can only warn and ignore the option if not recognized
+    # So say no if there are warnings
+      if test -s conftest.err; then
+	echo "$ac_t"no 1>&6
+	compiler_o_lo=no
+      else
+	echo "$ac_t"yes 1>&6
+	compiler_o_lo=yes
+      fi
+  else
+    # Append any errors to the config.log.
+    cat conftest.err 1>&5
+    compiler_o_lo=no
+    echo "$ac_t"no 1>&6
+  fi
+  CFLAGS="$save_CFLAGS"
+  $rm conftest*
+else
+  compiler_o_lo=no
+fi
+
+# Check to see if we can do hard links to lock some files if needed
+hard_links="nottested"
+if test "$compiler_c_o" = no && test "$need_locks" != no; then
+  # do not overwrite the value of need_locks provided by the user
+  echo $ac_n "checking if we can lock with hard links... $ac_c" 1>&6
+  hard_links=yes
+  $rm conftest*
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  touch conftest.a
+  ln conftest.a conftest.b 2>&5 || hard_links=no
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  echo "$ac_t$hard_links" 1>&6
+  $rm conftest*
+  if test "$hard_links" = no; then
+    echo "*** WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2
+    need_locks=warn
+  fi
+else
+  need_locks=no
+fi
+
+if test "$with_gcc" = yes; then
+  # Check to see if options -fno-rtti -fno-exceptions are supported by compiler
+  echo $ac_n "checking if $compiler supports -fno-rtti -fno-exceptions ... $ac_c" 1>&6
+  $rm conftest*
+  echo "int some_variable = 0;" > conftest.c
+  save_CFLAGS="$CFLAGS"
+  CFLAGS="$CFLAGS -fno-rtti -fno-exceptions -c conftest.c"
+  echo "$progname:914: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
+  if { (eval echo $progname:915: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>conftest.err; } && test -s conftest.o; then
+
+    # The compiler can only warn and ignore the option if not recognized
+    # So say no if there are warnings
+      if test -s conftest.err; then
+	echo "$ac_t"no 1>&6
+	compiler_rtti_exceptions=no
+      else
+	echo "$ac_t"yes 1>&6
+	compiler_rtti_exceptions=yes
+      fi
+  else
+    # Append any errors to the config.log.
+    cat conftest.err 1>&5
+    compiler_rtti_exceptions=no
+    echo "$ac_t"no 1>&6
+  fi
+  CFLAGS="$save_CFLAGS"
+  $rm conftest*
+
+  if test "$compiler_rtti_exceptions" = "yes"; then
+    no_builtin_flag=' -fno-builtin -fno-rtti -fno-exceptions'
+  else
+    no_builtin_flag=' -fno-builtin'
+  fi
+  
+fi
+
+# Check for any special shared library compilation flags.
+if test -n "$special_shlib_compile_flags"; then
+  echo "$progname: warning: \`$CC' requires \`$special_shlib_compile_flags' to build shared libraries" 1>&2
+  if echo "$old_CC $old_CFLAGS " | egrep -e "[ 	]$special_shlib_compile_flags[ 	]" >/dev/null; then :
+  else
+    echo "$progname: add \`$special_shlib_compile_flags' to the CC or CFLAGS env variable and reconfigure" 1>&2
+    can_build_shared=no
+  fi
+fi
+
+echo $ac_n "checking if $compiler static flag $link_static_flag works... $ac_c" 1>&6
+$rm conftest*
+echo 'main(){return(0);}' > conftest.c
+save_LDFLAGS="$LDFLAGS"
+LDFLAGS="$LDFLAGS $link_static_flag"
+echo "$progname:958: checking if $compiler static flag $link_static_flag works" >&5
+if { (eval echo $progname:959: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+  echo "$ac_t$link_static_flag" 1>&6
+else
+  echo "$ac_t"none 1>&6
+  link_static_flag=
+fi
+LDFLAGS="$save_LDFLAGS"
+$rm conftest*
+
+if test -z "$LN_S"; then
+  # Check to see if we can use ln -s, or we need hard links.
+  echo $ac_n "checking whether ln -s works... $ac_c" 1>&6
+  $rm conftest.dat
+  if ln -s X conftest.dat 2>/dev/null; then
+    $rm conftest.dat
+    LN_S="ln -s"
+  else
+    LN_S=ln
+  fi
+  if test "$LN_S" = "ln -s"; then
+    echo "$ac_t"yes 1>&6
+  else
+    echo "$ac_t"no 1>&6
+  fi
+fi
+
+# Make sure LD is an absolute path.
+if test -z "$LD"; then
+  ac_prog=ld
+  if test "$with_gcc" = yes; then
+    # Check if gcc -print-prog-name=ld gives a path.
+    echo $ac_n "checking for ld used by GCC... $ac_c" 1>&6
+    echo "$progname:991: checking for ld used by GCC" >&5
+    ac_prog=`($CC -print-prog-name=ld) 2>&5`
+    case "$ac_prog" in
+    # Accept absolute paths.
+    [\\/]* | [A-Za-z]:[\\/]*)
+      re_direlt='/[^/][^/]*/\.\./'
+      # Canonicalize the path of ld
+      ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
+      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
+	ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
+      done
+      test -z "$LD" && LD="$ac_prog"
+      ;;
+    "")
+      # If it fails, then pretend we are not using GCC.
+      ac_prog=ld
+      ;;
+    *)
+      # If it is relative, then search for the first ld in PATH.
+      with_gnu_ld=unknown
+      ;;
+    esac
+  elif test "$with_gnu_ld" = yes; then
+    echo $ac_n "checking for GNU ld... $ac_c" 1>&6
+    echo "$progname:1015: checking for GNU ld" >&5
+  else
+    echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6
+    echo "$progname:1018: checking for non-GNU ld" >&5
+  fi
+
+  if test -z "$LD"; then
+    IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR}"
+    for ac_dir in $PATH; do
+      test -z "$ac_dir" && ac_dir=.
+      if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+	LD="$ac_dir/$ac_prog"
+	# Check to see if the program is GNU ld.  I'd rather use --version,
+	# but apparently some GNU ld's only accept -v.
+	# Break only if it was the GNU/non-GNU ld that we prefer.
+	if "$LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
+	  test "$with_gnu_ld" != no && break
+	else
+	  test "$with_gnu_ld" != yes && break
+	fi
+      fi
+    done
+    IFS="$ac_save_ifs"
+  fi
+
+  if test -n "$LD"; then
+    echo "$ac_t$LD" 1>&6
+  else
+    echo "$ac_t"no 1>&6
+  fi
+
+  if test -z "$LD"; then
+    echo "$progname: error: no acceptable ld found in \$PATH" 1>&2
+    exit 1
+  fi
+fi
+
+# Check to see if it really is or is not GNU ld.
+echo $ac_n "checking if the linker ($LD) is GNU ld... $ac_c" 1>&6
+# I'd rather use --version here, but apparently some GNU ld's only accept -v.
+if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
+  with_gnu_ld=yes
+else
+  with_gnu_ld=no
+fi
+echo "$ac_t$with_gnu_ld" 1>&6
+
+# See if the linker supports building shared libraries.
+echo $ac_n "checking whether the linker ($LD) supports shared libraries... $ac_c" 1>&6
+
+allow_undefined_flag=
+no_undefined_flag=
+need_lib_prefix=unknown
+need_version=unknown
+# when you set need_version to no, make sure it does not cause -set_version
+# flags to be left without arguments
+archive_cmds=
+archive_expsym_cmds=
+old_archive_from_new_cmds=
+export_dynamic_flag_spec=
+whole_archive_flag_spec=
+thread_safe_flag_spec=
+hardcode_libdir_flag_spec=
+hardcode_libdir_separator=
+hardcode_direct=no
+hardcode_minus_L=no
+hardcode_shlibpath_var=unsupported
+runpath_var=
+always_export_symbols=no
+export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | sed '\''s/.* //'\'' | sort | uniq > $export_symbols'
+# include_expsyms should be a list of space-separated symbols to be *always*
+# included in the symbol list
+include_expsyms=
+# exclude_expsyms can be an egrep regular expression of symbols to exclude
+# it will be wrapped by ` (' and `)$', so one must not match beginning or
+# end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
+# as well as any symbol that contains `d'.
+exclude_expsyms="_GLOBAL_OFFSET_TABLE_"
+# Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
+# platforms (ab)use it in PIC code, but their linkers get confused if
+# the symbol is explicitly referenced.  Since portable code cannot
+# rely on this symbol name, it's probably fine to never include it in
+# preloaded symbol tables.
+
+case "$host_os" in
+cygwin* | mingw*)
+  # FIXME: the MSVC++ port hasn't been tested in a loooong time
+  # When not using gcc, we currently assume that we are using
+  # Microsoft Visual C++.
+  if test "$with_gcc" != yes; then
+    with_gnu_ld=no
+  fi
+  ;;
+
+esac
+
+ld_shlibs=yes
+if test "$with_gnu_ld" = yes; then
+  # If archive_cmds runs LD, not CC, wlarc should be empty
+  wlarc='${wl}'
+
+  # See if GNU ld supports shared libraries.
+  case "$host_os" in
+  aix3* | aix4*)
+    # On AIX, the GNU linker is very broken
+    ld_shlibs=no
+    cat <<EOF 1>&2
+
+*** Warning: the GNU linker, at least up to release 2.9.1, is reported
+*** to be unable to reliably create shared libraries on AIX.
+*** Therefore, libtool is disabling shared libraries support.  If you
+*** really care for shared libraries, you may want to modify your PATH
+*** so that a non-GNU linker is found, and then restart.
+
+EOF
+    ;;
+
+  amigaos*)
+    archive_cmds='$rm $objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $objdir/a2ixlibrary.data~$AR cru $lib $libobjs~$RANLIB $lib~(cd $objdir && a2ixlibrary -32)'
+    hardcode_libdir_flag_spec='-L$libdir'
+    hardcode_minus_L=yes
+
+    # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
+    # that the semantics of dynamic libraries on AmigaOS, at least up
+    # to version 4, is to share data among multiple programs linked
+    # with the same dynamic library.  Since this doesn't match the
+    # behavior of shared libraries on other platforms, we can use
+    # them.
+    ld_shlibs=no
+    ;;
+
+  beos*)
+    if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
+      allow_undefined_flag=unsupported
+      # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+      # support --undefined.  This deserves some investigation.  FIXME
+      archive_cmds='$CC -nostart $libobjs $deplibs $linkopts ${wl}-soname $wl$soname -o $lib'
+    else
+      ld_shlibs=no
+    fi
+    ;;
+
+  cygwin* | mingw*)
+    # hardcode_libdir_flag_spec is actually meaningless, as there is
+    # no search path for DLLs.
+    hardcode_libdir_flag_spec='-L$libdir'
+    allow_undefined_flag=unsupported
+    always_export_symbols=yes
+
+    # Extract the symbol export list from an `--export-all' def file,
+    # then regenerate the def file from the symbol export list, so that
+    # the compiled dll only exports the symbol export list.
+    export_symbols_cmds='test -f $objdir/$soname-ltdll.c || sed -e "/^# \/\* ltdll\.c starts here \*\//,/^# \/\* ltdll.c ends here \*\// { s/^# //; p; }" -e d < $0 > $objdir/$soname-ltdll.c~
+      test -f $objdir/$soname-ltdll.$objext || (cd $objdir && $CC -c $soname-ltdll.c)~
+      $DLLTOOL --export-all --exclude-symbols DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12 --output-def $objdir/$soname-def  $objdir/$soname-ltdll.$objext $libobjs $convenience~
+      sed -e "1,/EXPORTS/d" -e "s/ @ [0-9]* ; *//" < $objdir/$soname-def > $export_symbols'
+
+    archive_expsym_cmds='echo EXPORTS > $objdir/$soname-def~
+      _lt_hint=1;
+      for symbol in `cat $export_symbols`; do
+	echo "	\$symbol @ \$_lt_hint ; " >> $objdir/$soname-def;
+	_lt_hint=`expr 1 + \$_lt_hint`;
+      done~
+      test -f $objdir/$soname-ltdll.c || sed -e "/^# \/\* ltdll\.c starts here \*\//,/^# \/\* ltdll.c ends here \*\// { s/^# //; p; }" -e d < $0 > $objdir/$soname-ltdll.c~
+      test -f $objdir/$soname-ltdll.$objext || (cd $objdir && $CC -c $soname-ltdll.c)~
+      $CC -Wl,--base-file,$objdir/$soname-base -Wl,--dll -nostartfiles -Wl,-e,__cygwin_dll_entry@12 -o $lib $objdir/$soname-ltdll.$objext $libobjs $deplibs $linkopts~
+      $DLLTOOL --as=$AS --dllname $soname --exclude-symbols DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12 --def $objdir/$soname-def --base-file $objdir/$soname-base --output-exp $objdir/$soname-exp~
+      $CC -Wl,--base-file,$objdir/$soname-base $objdir/$soname-exp -Wl,--dll -nostartfiles -Wl,-e,__cygwin_dll_entry@12 -o $lib $objdir/$soname-ltdll.$objext $libobjs $deplibs $linkopts~
+      $DLLTOOL --as=$AS --dllname $soname --exclude-symbols DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12 --def $objdir/$soname-def --base-file $objdir/$soname-base --output-exp $objdir/$soname-exp~
+      $CC $objdir/$soname-exp -Wl,--dll -nostartfiles -Wl,-e,__cygwin_dll_entry@12 -o $lib $objdir/$soname-ltdll.$objext $libobjs $deplibs $linkopts'
+
+      old_archive_from_new_cmds='$DLLTOOL --as=$AS --dllname $soname --def $objdir/$soname-def --output-lib $objdir/$libname.a' 
+    ;;
+
+  netbsd*)
+    if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
+      archive_cmds='$CC -shared $libobjs $deplibs $linkopts ${wl}-soname $wl$soname -o $lib'
+      archive_expsym_cmds='$CC -shared $libobjs $deplibs $linkopts ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+    else
+      archive_cmds='$LD -Bshareable $libobjs $deplibs $linkopts -o $lib'
+      # can we support soname and/or expsyms with a.out? -oliva
+    fi
+    ;;
+
+  solaris*)
+    if $LD -v 2>&1 | egrep 'BFD 2\.8' > /dev/null; then
+      ld_shlibs=no
+      cat <<EOF 1>&2
+
+*** Warning: The releases 2.8.* of the GNU linker cannot reliably
+*** create shared libraries on Solaris systems.  Therefore, libtool
+*** is disabling shared libraries support.  We urge you to upgrade GNU
+*** binutils to release 2.9.1 or newer.  Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+EOF
+    elif $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
+      archive_cmds='$CC -shared $libobjs $deplibs $linkopts ${wl}-soname $wl$soname -o $lib'
+      archive_expsym_cmds='$CC -shared $libobjs $deplibs $linkopts ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+    else
+      ld_shlibs=no
+    fi
+    ;;      
+
+  sunos4*)
+    archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linkopts'
+    wlarc=
+    hardcode_direct=yes
+    hardcode_shlibpath_var=no
+    ;;
+
+  *)
+    if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
+      archive_cmds='$CC -shared $libobjs $deplibs $linkopts ${wl}-soname $wl$soname -o $lib'
+      archive_expsym_cmds='$CC -shared $libobjs $deplibs $linkopts ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+    else
+      ld_shlibs=no
+    fi
+    ;;
+  esac
+
+  if test "$ld_shlibs" = yes; then
+    runpath_var=LD_RUN_PATH
+    hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir'
+    export_dynamic_flag_spec='${wl}--export-dynamic'
+    case $host_os in
+    cygwin* | mingw*)
+      # dlltool doesn't understand --whole-archive et. al.
+      whole_archive_flag_spec=
+      ;;
+    *)
+      whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+      ;;
+    esac
+  fi
+else
+  # PORTME fill in a description of your system's linker (not GNU ld)
+  case "$host_os" in
+  aix3*)
+    allow_undefined_flag=unsupported
+    always_export_symbols=yes
+    archive_expsym_cmds='$LD -o $objdir/$soname $libobjs $deplibs $linkopts -bE:$export_symbols -T512 -H512 -bM:SRE~$AR cru $lib $objdir/$soname'
+    # Note: this linker hardcodes the directories in LIBPATH if there
+    # are no directories specified by -L.
+    hardcode_minus_L=yes
+    if test "$with_gcc" = yes && test -z "$link_static_flag"; then
+      # Neither direct hardcoding nor static linking is supported with a
+      # broken collect2.
+      hardcode_direct=unsupported
+    fi
+    ;;
+
+  aix4*)
+    hardcode_libdir_flag_spec='${wl}-b ${wl}nolibpath ${wl}-b ${wl}libpath:$libdir:/usr/lib:/lib'
+    hardcode_libdir_separator=':'
+    if test "$with_gcc" = yes; then
+      collect2name=`${CC} -print-prog-name=collect2`
+      if test -f "$collect2name" && \
+	 strings "$collect2name" | grep resolve_lib_name >/dev/null
+      then
+	# We have reworked collect2
+	hardcode_direct=yes
+      else
+	# We have old collect2
+	hardcode_direct=unsupported
+	# It fails to find uninstalled libraries when the uninstalled
+	# path is not listed in the libpath.  Setting hardcode_minus_L
+	# to unsupported forces relinking
+	hardcode_minus_L=yes
+	hardcode_libdir_flag_spec='-L$libdir'
+	hardcode_libdir_separator=
+      fi
+      shared_flag='-shared'
+    else
+      shared_flag='${wl}-bM:SRE'
+      hardcode_direct=yes
+    fi
+    allow_undefined_flag=' ${wl}-berok'
+    archive_cmds="\$CC $shared_flag"' -o $objdir/$soname $libobjs $deplibs $linkopts ${wl}-bexpall ${wl}-bnoentry${allow_undefined_flag}'
+    archive_expsym_cmds="\$CC $shared_flag"' -o $objdir/$soname $libobjs $deplibs $linkopts ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}'
+    case "$host_os" in aix4.[01]|aix4.[01].*)
+      # According to Greg Wooledge, -bexpall is only supported from AIX 4.2 on
+      always_export_symbols=yes ;;
+    esac
+   ;;
+
+  amigaos*)
+    archive_cmds='$rm $objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $objdir/a2ixlibrary.data~$AR cru $lib $libobjs~$RANLIB $lib~(cd $objdir && a2ixlibrary -32)'
+    hardcode_libdir_flag_spec='-L$libdir'
+    hardcode_minus_L=yes
+    # see comment about different semantics on the GNU ld section
+    ld_shlibs=no
+    ;;
+
+  cygwin* | mingw*)
+    # When not using gcc, we currently assume that we are using
+    # Microsoft Visual C++.
+    # hardcode_libdir_flag_spec is actually meaningless, as there is
+    # no search path for DLLs.
+    hardcode_libdir_flag_spec=' '
+    allow_undefined_flag=unsupported
+    # Tell ltmain to make .lib files, not .a files.
+    libext=lib
+    # FIXME: Setting linknames here is a bad hack.
+    archive_cmds='$CC -o $lib $libobjs $linkopts `echo "$deplibs" | sed -e '\''s/ -lc$//'\''` -link -dll~linknames='
+    # The linker will automatically build a .lib file if we build a DLL.
+    old_archive_from_new_cmds='true'
+    # FIXME: Should let the user specify the lib program.
+    old_archive_cmds='lib /OUT:$oldlib$oldobjs'
+    fix_srcfile_path='`cygpath -w $srcfile`'
+    ;;
+
+  freebsd1*)
+    ld_shlibs=no
+    ;;
+
+  # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
+  # support.  Future versions do this automatically, but an explicit c++rt0.o
+  # does not break anything, and helps significantly (at the cost of a little
+  # extra space).
+  freebsd2.2*)
+    archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linkopts /usr/lib/c++rt0.o'
+    hardcode_libdir_flag_spec='-R$libdir'
+    hardcode_direct=yes
+    hardcode_shlibpath_var=no
+    ;;
+
+  # Unfortunately, older versions of FreeBSD 2 do not have this feature.
+  freebsd2*)
+    archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linkopts'
+    hardcode_direct=yes
+    hardcode_minus_L=yes
+    hardcode_shlibpath_var=no
+    ;;
+
+  # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
+  freebsd*)
+    archive_cmds='$CC -shared -o $lib $libobjs $deplibs $linkopts'
+    hardcode_libdir_flag_spec='-R$libdir'
+    hardcode_direct=yes
+    hardcode_shlibpath_var=no
+    ;;
+
+  hpux9* | hpux10* | hpux11*)
+    case "$host_os" in
+    hpux9*) archive_cmds='$rm $objdir/$soname~$LD -b +b $install_libdir -o $objdir/$soname $libobjs $deplibs $linkopts~test $objdir/$soname = $lib || mv $objdir/$soname $lib' ;;
+    *) archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linkopts' ;;
+    esac
+    hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+    hardcode_libdir_separator=:
+    hardcode_direct=yes
+    hardcode_minus_L=yes # Not in the search PATH, but as the default
+			 # location of the library.
+    export_dynamic_flag_spec='${wl}-E'
+    ;;
+
+  irix5* | irix6*)
+    if test "$with_gcc" = yes; then
+      archive_cmds='$CC -shared $libobjs $deplibs $linkopts ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
+    else
+      archive_cmds='$LD -shared $libobjs $deplibs $linkopts -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
+    fi
+    hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+    hardcode_libdir_separator=:
+    ;;
+
+  netbsd*)
+    if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+      archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linkopts'  # a.out
+    else
+      archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linkopts'      # ELF
+    fi
+    hardcode_libdir_flag_spec='${wl}-R$libdir'
+    hardcode_direct=yes
+    hardcode_shlibpath_var=no
+    ;;
+
+  openbsd*)
+    archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linkopts'
+    hardcode_libdir_flag_spec='-R$libdir'
+    hardcode_direct=yes
+    hardcode_shlibpath_var=no
+    ;;
+
+  os2*)
+    hardcode_libdir_flag_spec='-L$libdir'
+    hardcode_minus_L=yes
+    allow_undefined_flag=unsupported
+    archive_cmds='$echo "LIBRARY $libname INITINSTANCE" > $objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $objdir/$libname.def~$echo DATA >> $objdir/$libname.def~$echo " SINGLE NONSHARED" >> $objdir/$libname.def~$echo EXPORTS >> $objdir/$libname.def~emxexp $libobjs >> $objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $linkopts $objdir/$libname.def'
+    old_archive_from_new_cmds='emximp -o $objdir/$libname.a $objdir/$libname.def'
+    ;;
+
+  osf3* | osf4*)
+    if test "$with_gcc" = yes; then
+      allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
+      archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $linkopts ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
+    else
+      allow_undefined_flag=' -expect_unresolved \*'
+      archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linkopts -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
+    fi
+    hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+    hardcode_libdir_separator=:
+    ;;
+
+  sco3.2v5*)
+    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linkopts'
+    hardcode_shlibpath_var=no
+    runpath_var=LD_RUN_PATH
+    hardcode_runpath_var=yes
+    ;;
+
+  solaris*)
+    no_undefined_flag=' -z text'
+    # $CC -shared without GNU ld will not create a library from C++
+    # object files and a static libstdc++, better avoid it by now
+    archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linkopts'
+    archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+		$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linkopts~$rm $lib.exp'
+    hardcode_libdir_flag_spec='-R$libdir'
+    hardcode_shlibpath_var=no
+    case "$host_os" in
+    solaris2.[0-5] | solaris2.[0-5].*) ;;
+    *) # Supported since Solaris 2.6 (maybe 2.5.1?)
+      whole_archive_flag_spec='-z allextract$convenience -z defaultextract' ;;
+    esac
+    ;;
+
+  sunos4*)
+    archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linkopts'
+    hardcode_libdir_flag_spec='-L$libdir'
+    hardcode_direct=yes
+    hardcode_minus_L=yes
+    hardcode_shlibpath_var=no
+    ;;
+
+  sysv4)
+    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linkopts'
+    runpath_var='LD_RUN_PATH'
+    hardcode_shlibpath_var=no
+    hardcode_direct=no #Motorola manual says yes, but my tests say they lie 
+    ;;  
+
+  sysv4.3*)
+    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linkopts'
+    hardcode_shlibpath_var=no
+    export_dynamic_flag_spec='-Bexport'
+    ;;
+
+  uts4*)
+    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linkopts'
+    hardcode_libdir_flag_spec='-L$libdir'
+    hardcode_shlibpath_var=no
+    ;;
+
+  dgux*)
+    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linkopts'
+    hardcode_libdir_flag_spec='-L$libdir'
+    hardcode_shlibpath_var=no
+    ;;
+
+  sysv4*MP*)
+    if test -d /usr/nec ;then
+    # archive_cmds='$LD -G -z text -h $soname -o $lib$libobjs$deplibs'
+    archive_cmds='$LD -G -h $soname -o $lib$libobjs$deplibs'
+    hardcode_shlibpath_var=no
+    runpath_var=LD_RUN_PATH
+    hardcode_runpath_var=yes
+    ld_shlibs=yes
+    fi
+    ;;
+
+  *)
+    ld_shlibs=no
+    ;;
+  esac
+fi
+echo "$ac_t$ld_shlibs" 1>&6
+test "$ld_shlibs" = no && can_build_shared=no
+
+if test -z "$NM"; then
+  echo $ac_n "checking for BSD-compatible nm... $ac_c" 1>&6
+  case "$NM" in
+  [\\/]* | [A-Za-z]:[\\/]*) ;; # Let the user override the test with a path.
+  *)
+    IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR}"
+    for ac_dir in $PATH /usr/ucb /usr/ccs/bin /bin; do
+      test -z "$ac_dir" && ac_dir=.
+      if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext; then
+	# Check to see if the nm accepts a BSD-compat flag.
+	# Adding the `sed 1q' prevents false positives on HP-UX, which says:
+	#   nm: unknown option "B" ignored
+	if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
+	  NM="$ac_dir/nm -B"
+	  break
+	elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
+	  NM="$ac_dir/nm -p"
+	  break
+	else
+	  NM=${NM="$ac_dir/nm"} # keep the first match, but
+	  continue # so that we can try to find one that supports BSD flags
+	fi
+      fi
+    done
+    IFS="$ac_save_ifs"
+    test -z "$NM" && NM=nm
+    ;;
+  esac
+  echo "$ac_t$NM" 1>&6
+fi
+
+# Check for command to grab the raw symbol name followed by C symbol from nm.
+echo $ac_n "checking command to parse $NM output... $ac_c" 1>&6
+
+# These are sane defaults that work on at least a few old systems.
+# [They come from Ultrix.  What could be older than Ultrix?!! ;)]
+
+# Character class describing NM global symbol codes.
+symcode='[BCDEGRST]'
+
+# Regexp to match symbols that can be accessed directly from C.
+sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
+
+# Transform the above into a raw symbol and a C symbol.
+symxfrm='\1 \2\3 \3'
+
+# Transform an extracted symbol line into a proper C declaration
+global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern char \1;/p'"
+
+# Define system-specific variables.
+case "$host_os" in
+aix*)
+  symcode='[BCDT]'
+  ;;
+cygwin* | mingw*)
+  symcode='[ABCDGISTW]'
+  ;;
+hpux*) # Its linker distinguishes data from code symbols
+  global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern char \1();/p' -e 's/^. .* \(.*\)$/extern char \1;/p'"
+  ;;
+irix*)
+  symcode='[BCDEGRST]'
+  ;;
+solaris*)
+  symcode='[BDT]'
+  ;;
+sysv4)
+  symcode='[DFNSTU]'
+  ;;
+esac
+
+# If we're using GNU nm, then use its standard symbol codes.
+if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then
+  symcode='[ABCDGISTW]'
+fi
+
+# Try without a prefix undercore, then with it.
+for ac_symprfx in "" "_"; do
+
+  # Write the raw and C identifiers.
+  global_symbol_pipe="sed -n -e 's/^.*[ 	]\($symcode\)[ 	][ 	]*\($ac_symprfx\)$sympat$/$symxfrm/p'"
+
+  # Check to see that the pipe works correctly.
+  pipe_works=no
+  $rm conftest*
+  cat > conftest.c <<EOF
+#ifdef __cplusplus
+extern "C" {
+#endif
+char nm_test_var;
+void nm_test_func(){}
+#ifdef __cplusplus
+}
+#endif
+main(){nm_test_var='a';nm_test_func();return(0);}
+EOF
+
+  echo "$progname:1592: checking if global_symbol_pipe works" >&5
+  if { (eval echo $progname:1593: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; } && test -s conftest.$objext; then
+    # Now try to grab the symbols.
+    nlist=conftest.nm
+    if { echo "$progname:1596: eval \"$NM conftest.$objext | $global_symbol_pipe > $nlist\"" >&5; eval "$NM conftest.$objext | $global_symbol_pipe > $nlist 2>&5"; } && test -s "$nlist"; then
+
+      # Try sorting and uniquifying the output.
+      if sort "$nlist" | uniq > "$nlist"T; then
+	mv -f "$nlist"T "$nlist"
+      else
+	rm -f "$nlist"T
+      fi
+
+      # Make sure that we snagged all the symbols we need.
+      if egrep ' nm_test_var$' "$nlist" >/dev/null; then
+	if egrep ' nm_test_func$' "$nlist" >/dev/null; then
+	  cat <<EOF > conftest.c
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+EOF
+	  # Now generate the symbol file.
+	  eval "$global_symbol_to_cdecl"' < "$nlist" >> conftest.c'
+
+	  cat <<EOF >> conftest.c
+#if defined (__STDC__) && __STDC__
+# define lt_ptr_t void *
+#else
+# define lt_ptr_t char *
+# define const
+#endif
+
+/* The mapping between symbol names and symbols. */
+const struct {
+  const char *name;
+  lt_ptr_t address;
+}
+lt_preloaded_symbols[] =
+{
+EOF
+	  sed 's/^. \(.*\) \(.*\)$/  {"\2", (lt_ptr_t) \&\2},/' < "$nlist" >> conftest.c
+	  cat <<\EOF >> conftest.c
+  {0, (lt_ptr_t) 0}
+};
+
+#ifdef __cplusplus
+}
+#endif
+EOF
+	  # Now try linking the two files.
+	  mv conftest.$objext conftstm.$objext
+	  save_LIBS="$LIBS"
+	  save_CFLAGS="$CFLAGS"
+	  LIBS="conftstm.$objext"
+	  CFLAGS="$CFLAGS$no_builtin_flag"
+	  if { (eval echo $progname:1648: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+	    pipe_works=yes
+	  else
+	    echo "$progname: failed program was:" >&5
+	    cat conftest.c >&5
+	  fi
+	  LIBS="$save_LIBS"
+	else
+	  echo "cannot find nm_test_func in $nlist" >&5
+	fi
+      else
+	echo "cannot find nm_test_var in $nlist" >&5
+      fi
+    else
+      echo "cannot run $global_symbol_pipe" >&5
+    fi
+  else
+    echo "$progname: failed program was:" >&5
+    cat conftest.c >&5
+  fi
+  $rm conftest* conftst*
+
+  # Do not use the global_symbol_pipe unless it works.
+  if test "$pipe_works" = yes; then
+    break
+  else
+    global_symbol_pipe=
+  fi
+done
+if test "$pipe_works" = yes; then
+  echo "${ac_t}ok" 1>&6
+else
+  echo "${ac_t}failed" 1>&6
+fi
+
+if test -z "$global_symbol_pipe"; then
+  global_symbol_to_cdecl=
+fi
+
+# Check hardcoding attributes.
+echo $ac_n "checking how to hardcode library paths into programs... $ac_c" 1>&6
+hardcode_action=
+if test -n "$hardcode_libdir_flag_spec" || \
+   test -n "$runpath_var"; then
+
+  # We can hardcode non-existant directories.
+  if test "$hardcode_direct" != no &&
+     # If the only mechanism to avoid hardcoding is shlibpath_var, we
+     # have to relink, otherwise we might link with an installed library
+     # when we should be linking with a yet-to-be-installed one
+     ## test "$hardcode_shlibpath_var" != no &&
+     test "$hardcode_minus_L" != no; then
+    # Linking always hardcodes the temporary library directory.
+    hardcode_action=relink
+  else
+    # We can link without hardcoding, and we can hardcode nonexisting dirs.
+    hardcode_action=immediate
+  fi
+else
+  # We cannot hardcode anything, or else we can only hardcode existing
+  # directories.
+  hardcode_action=unsupported
+fi
+echo "$ac_t$hardcode_action" 1>&6
+
+
+reload_flag=
+reload_cmds='$LD$reload_flag -o $output$reload_objs'
+echo $ac_n "checking for $LD option to reload object files... $ac_c" 1>&6
+# PORTME Some linkers may need a different reload flag.
+reload_flag='-r'
+echo "$ac_t$reload_flag" 1>&6
+test -n "$reload_flag" && reload_flag=" $reload_flag"
+
+# PORTME Fill in your ld.so characteristics
+library_names_spec=
+libname_spec='lib$name'
+soname_spec=
+postinstall_cmds=
+postuninstall_cmds=
+finish_cmds=
+finish_eval=
+shlibpath_var=
+shlibpath_overrides_runpath=unknown
+version_type=none
+dynamic_linker="$host_os ld.so"
+sys_lib_dlsearch_path_spec="/lib /usr/lib"
+sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+file_magic_cmd=
+file_magic_test_file=
+deplibs_check_method='unknown'
+# Need to set the preceding variable on all platforms that support
+# interlibrary dependencies.
+# 'none' -- dependencies not supported.
+# `unknown' -- same as none, but documents that we really don't know.
+# 'pass_all' -- all dependencies passed with no checks.
+# 'test_compile' -- check by making test program.
+# 'file_magic [regex]' -- check by looking for files in library path
+# which responds to the $file_magic_cmd with a given egrep regex.
+# If you have `file' or equivalent on your system and you're not sure
+# whether `pass_all' will *always* work, you probably want this one.
+echo $ac_n "checking dynamic linker characteristics... $ac_c" 1>&6
+case "$host_os" in
+aix3*)
+  version_type=linux
+  library_names_spec='${libname}${release}.so$versuffix $libname.a'
+  shlibpath_var=LIBPATH
+
+  # AIX has no versioning support, so we append a major version to the name.
+  soname_spec='${libname}${release}.so$major'
+  ;;
+
+aix4*)
+  version_type=linux
+  # AIX has no versioning support, so currently we can not hardcode correct
+  # soname into executable. Probably we can add versioning support to
+  # collect2, so additional links can be useful in future.
+  # We preserve .a as extension for shared libraries though AIX4.2
+  # and later linker supports .so
+  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.a'
+  shlibpath_var=LIBPATH
+  deplibs_check_method=pass_all
+  ;;
+
+amigaos*)
+  library_names_spec='$libname.ixlibrary $libname.a'
+  # Create ${libname}_ixlibrary.a entries in /sys/libs.
+  finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "(cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a)"; (cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a) || exit 1; done'
+  ;;
+
+beos*)
+  library_names_spec='${libname}.so'
+  dynamic_linker="$host_os ld.so"
+  shlibpath_var=LIBRARY_PATH
+  deplibs_check_method=pass_all
+  lt_cv_dlopen="load_add_on"
+  lt_cv_dlopen_libs=
+  lt_cv_dlopen_self=yes
+  ;;
+
+bsdi4*)
+  version_type=linux
+  library_names_spec='${libname}.so$major ${libname}.so'
+  soname_spec='${libname}.so'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
+  file_magic_cmd=/usr/bin/file
+  file_magic_test_file=/shlib/libc.so
+  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
+  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
+  # the default ld.so.conf also contains /usr/contrib/lib and
+  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
+  # libtool to hard-code these into programs
+  ;;
+
+cygwin* | mingw*)
+  version_type=windows
+  need_version=no
+  need_lib_prefix=no
+  if test "$with_gcc" = yes; then
+    library_names_spec='${libname}`echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll $libname.a'
+  else
+    library_names_spec='${libname}`echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll $libname.lib'
+  fi
+  dynamic_linker='Win32 ld.exe'
+  deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
+  file_magic_cmd='${OBJDUMP} -f'
+  # FIXME: first we should search . and the directory the executable is in
+  shlibpath_var=PATH
+  lt_cv_dlopen="LoadLibrary"
+  lt_cv_dlopen_libs=
+  ;;
+
+freebsd1*)
+  dynamic_linker=no
+  ;;
+  
+freebsd*)
+  objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout`
+  version_type=freebsd-$objformat
+  case "$version_type" in
+    freebsd-elf*)
+      deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB shared object'
+      file_magic_cmd=/usr/bin/file
+      file_magic_test_file=`echo /usr/lib/libc.so*`
+      library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so'
+      need_version=no
+      need_lib_prefix=no
+      ;;
+    freebsd-*)
+      deplibs_check_method=unknown
+      library_names_spec='${libname}${release}.so$versuffix $libname.so$versuffix'
+      need_version=yes
+      ;;
+  esac
+  finish_cmds='PATH="\$PATH:/sbin" OBJFORMAT="'"$objformat"'" ldconfig -m $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  case "$host_os" in
+  freebsd2* | freebsd3.[01]*)
+    shlibpath_overrides_runpath=yes
+    ;;
+  *) # from 3.2 on
+    shlibpath_overrides_runpath=no
+    ;;
+  esac
+  ;;
+
+gnu*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so${major} ${libname}.so'
+  soname_spec='${libname}${release}.so$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+hpux9* | hpux10* | hpux11*)
+  # Give a soname corresponding to the major version so that dld.sl refuses to
+  # link against other versions.
+  dynamic_linker="$host_os dld.sl"
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  shlibpath_var=SHLIB_PATH
+  shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
+  library_names_spec='${libname}${release}.sl$versuffix ${libname}${release}.sl$major $libname.sl'
+  soname_spec='${libname}${release}.sl$major'
+  # HP-UX runs *really* slowly unless shared libraries are mode 555.
+  postinstall_cmds='chmod 555 $lib'
+  ;;
+
+irix5* | irix6*)
+  version_type=irix
+  need_lib_prefix=no
+  need_version=no
+  soname_spec='${libname}${release}.so.$major'
+  library_names_spec='${libname}${release}.so.$versuffix ${libname}${release}.so.$major ${libname}${release}.so $libname.so'
+  case "$host_os" in
+  irix5*)
+    libsuff= shlibsuff=
+    # this will be overridden with pass_all, but let us keep it just in case
+    deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1"
+    ;;
+  *)
+    case "$LD" in # libtool.m4 will add one of these switches to LD
+    *-32|*"-32 ") libsuff= shlibsuff= libmagic=32-bit;;
+    *-n32|*"-n32 ") libsuff=32 shlibsuff=N32 libmagic=N32;;
+    *-64|*"-64 ") libsuff=64 shlibsuff=64 libmagic=64-bit;;
+    *) libsuff= shlibsuff= libmagic=never-match;;
+    esac
+    # this will be overridden with pass_all, but let us keep it just in case
+    deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[1234] dynamic lib MIPS - version 1"
+    ;;
+  esac
+  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
+  shlibpath_overrides_runpath=no
+  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
+  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
+  file_magic_cmd=/usr/bin/file
+  file_magic_test_file=`echo /lib${libsuff}/libc.so*`
+  deplibs_check_method='pass_all'
+  ;;
+
+# No shared lib support for Linux oldld, aout, or coff.
+linux-gnuoldld* | linux-gnuaout* | linux-gnucoff*)
+  dynamic_linker=no
+  ;;
+
+# This must be Linux ELF.
+linux-gnu*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+  soname_spec='${libname}${release}.so$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )'
+  file_magic_cmd=/usr/bin/file
+  file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
+
+  if test -f /lib/ld.so.1; then
+    dynamic_linker='GNU ld.so'
+  else
+    # Only the GNU ld.so supports shared libraries on MkLinux.
+    case "$host_cpu" in
+    powerpc*) dynamic_linker=no ;;
+    *) dynamic_linker='Linux ld.so' ;;
+    esac
+  fi
+  ;;
+
+netbsd*)
+  version_type=sunos
+  if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+    library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix'
+    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+    dynamic_linker='NetBSD (a.out) ld.so'
+  else
+    library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so ${libname}.so'
+    soname_spec='${libname}${release}.so$major'
+    dynamic_linker='NetBSD ld.elf_so'
+  fi
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+openbsd*)
+  version_type=sunos
+  if test "$with_gnu_ld" = yes; then
+    need_lib_prefix=no
+    need_version=no
+  fi
+  library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+os2*)
+  libname_spec='$name'
+  need_lib_prefix=no
+  library_names_spec='$libname.dll $libname.a'
+  dynamic_linker='OS/2 ld.exe'
+  shlibpath_var=LIBPATH
+  ;;
+
+osf3* | osf4*)
+  version_type=osf
+  need_version=no
+  soname_spec='${libname}${release}.so'
+  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so'
+  shlibpath_var=LD_LIBRARY_PATH
+  # this will be overridden with pass_all, but let us keep it just in case
+  deplibs_check_method='file_magic COFF format alpha shared library'
+  file_magic_cmd=/usr/bin/file
+  file_magic_test_file=/shlib/libc.so
+  deplibs_check_method='pass_all'
+  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
+  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
+  ;;
+
+sco3.2v5*)
+  version_type=osf
+  soname_spec='${libname}${release}.so$major'
+  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+solaris*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+  soname_spec='${libname}${release}.so$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  # ldd complains unless libraries are executable
+  postinstall_cmds='chmod +x $lib'
+  deplibs_check_method="file_magic ELF [0-9][0-9]-bit [LM]SB dynamic lib"
+  file_magic_cmd=/usr/bin/file
+  file_magic_test_file=/lib/libc.so
+  ;;
+
+sunos4*)
+  version_type=sunos
+  library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix'
+  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  if test "$with_gnu_ld" = yes; then
+    need_lib_prefix=no
+  fi
+  need_version=yes
+  ;;
+
+sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+  version_type=linux
+  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+  soname_spec='${libname}${release}.so$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  case "$host_vendor" in
+    ncr)
+      deplibs_check_method='pass_all'
+      ;;
+    motorola)
+      need_lib_prefix=no
+      need_version=no
+      shlibpath_overrides_runpath=no
+      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
+      deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'
+      file_magic_cmd=/usr/bin/file
+      file_magic_test_file=`echo /usr/lib/libc.so*`
+      ;;
+  esac
+  ;;
+
+uts4*)
+  version_type=linux
+  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+  soname_spec='${libname}${release}.so$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+dgux*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+  soname_spec='${libname}${release}.so$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+sysv4*MP*)
+  if test -d /usr/nec ;then
+    version_type=linux
+    library_names_spec='$libname.so.$versuffix $libname.so.$major $libname.so'
+    soname_spec='$libname.so.$major'
+    shlibpath_var=LD_LIBRARY_PATH
+  fi
+  ;;
+
+*)
+  dynamic_linker=no
+  ;;
+esac
+echo "$ac_t$dynamic_linker" 1>&6
+test "$dynamic_linker" = no && can_build_shared=no
+
+# Report the final consequences.
+echo "checking if libtool supports shared libraries... $can_build_shared" 1>&6
+
+# Only try to build win32 dlls if AC_LIBTOOL_WIN32_DLL was used in
+# configure.in, otherwise build static only libraries.
+case "$host_os" in
+cygwin* | mingw* | os2*)
+  if test x$can_build_shared = xyes; then
+    test x$enable_win32_dll = xno && can_build_shared=no
+    echo "checking if package supports dlls... $can_build_shared" 1>&6
+  fi
+;;
+esac
+
+if test -n "$file_magic_test_file" && test -n "$file_magic_cmd"; then
+  case "$deplibs_check_method" in
+  "file_magic "*)
+    file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
+    if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+       egrep "$file_magic_regex" > /dev/null; then
+      :
+    else
+      cat <<EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such.  This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem.  Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
+
+EOF
+    fi ;;
+  esac
+fi
+
+echo $ac_n "checking whether to build shared libraries... $ac_c" 1>&6
+test "$can_build_shared" = "no" && enable_shared=no
+
+# On AIX, shared libraries and static libraries use the same namespace, and
+# are all built from PIC.
+case "$host_os" in
+aix3*)
+  test "$enable_shared" = yes && enable_static=no
+  if test -n "$RANLIB"; then
+    archive_cmds="$archive_cmds~\$RANLIB \$lib"
+    postinstall_cmds='$RANLIB $lib'
+  fi
+  ;;
+
+aix4*)
+  test "$enable_shared" = yes && enable_static=no
+  ;;
+esac
+
+echo "$ac_t$enable_shared" 1>&6
+
+# Make sure either enable_shared or enable_static is yes.
+test "$enable_shared" = yes || enable_static=yes
+
+echo "checking whether to build static libraries... $enable_static" 1>&6
+
+if test "$hardcode_action" = relink; then
+  # Fast installation is not supported
+  enable_fast_install=no
+elif test "$shlibpath_overrides_runpath" = yes ||
+     test "$enable_shared" = no; then
+  # Fast installation is not necessary
+  enable_fast_install=needless
+fi
+
+echo $ac_n "checking for objdir... $ac_c" 1>&6
+rm -f .libs 2>/dev/null
+mkdir .libs 2>/dev/null
+if test -d .libs; then
+  objdir=.libs
+else
+  # MS-DOS does not allow filenames that begin with a dot.
+  objdir=_libs
+fi
+rmdir .libs 2>/dev/null
+echo "$ac_t$objdir" 1>&6
+
+if test "x$enable_dlopen" != xyes; then
+  enable_dlopen=unknown
+  enable_dlopen_self=unknown
+  enable_dlopen_self_static=unknown
+else
+if eval "test \"`echo '$''{'lt_cv_dlopen'+set}'`\" != set"; then
+  lt_cv_dlopen=no lt_cv_dlopen_libs=
+echo $ac_n "checking for dlopen in -ldl""... $ac_c" 1>&6
+echo "$progname:2170: checking for dlopen in -ldl" >&5
+ac_lib_var=`echo dl'_'dlopen | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  ac_save_LIBS="$LIBS"
+LIBS="-ldl  $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 2178 "ltconfig"
+/* Override any gcc2 internal prototype to avoid an error.  */
+/* We use char because int might match the return type of a gcc2
+    builtin and then its argument prototype would still apply.  */
+char dlopen();
+
+int main() {
+dlopen()
+; return 0; }
+EOF
+if { (eval echo $progname:2188: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+  rm -rf conftest*
+  eval "ac_cv_lib_$ac_lib_var=yes"
+else
+  echo "$progname: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+  echo "$ac_t""yes" 1>&6
+  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
+else
+  echo "$ac_t""no" 1>&6
+echo $ac_n "checking for dlopen""... $ac_c" 1>&6
+echo "$progname:2207: checking for dlopen" >&5
+if eval "test \"`echo '$''{'ac_cv_func_dlopen'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 2212 "ltconfig"
+/* System header to define __stub macros and hopefully few prototypes,
+    which can conflict with char dlopen(); below.  */
+#include <assert.h>
+/* Override any gcc2 internal prototype to avoid an error.  */
+/* We use char because int might match the return type of a gcc2
+    builtin and then its argument prototype would still apply.  */
+char dlopen();
+
+int main() {
+
+/* The GNU C library defines this for functions which it implements
+    to always fail with ENOSYS.  Some functions are actually named
+    something starting with __ and the normal name is an alias.  */
+#if defined (__stub_dlopen) || defined (__stub___dlopen)
+choke me
+#else
+dlopen();
+#endif
+
+; return 0; }
+EOF
+if { (eval echo $progname:2234: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+  rm -rf conftest*
+  eval "ac_cv_func_dlopen=yes"
+else
+  echo "$progname: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  eval "ac_cv_func_dlopen=no"
+fi
+rm -f conftest*
+fi
+if eval "test \"`echo '$ac_cv_func_'dlopen`\" = yes"; then
+  echo "$ac_t""yes" 1>&6
+  lt_cv_dlopen="dlopen"
+else
+  echo "$ac_t""no" 1>&6
+echo $ac_n "checking for dld_link in -ldld""... $ac_c" 1>&6
+echo "$progname:2251: checking for dld_link in -ldld" >&5
+ac_lib_var=`echo dld'_'dld_link | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  ac_save_LIBS="$LIBS"
+LIBS="-ldld  $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 2259 "ltconfig"
+/* Override any gcc2 internal prototype to avoid an error.  */
+/* We use char because int might match the return type of a gcc2
+    builtin and then its argument prototype would still apply.  */
+char dld_link();
+
+int main() {
+dld_link()
+; return 0; }
+EOF
+if { (eval echo $progname:2269: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+  rm -rf conftest*
+  eval "ac_cv_lib_$ac_lib_var=yes"
+else
+  echo "$progname: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+  echo "$ac_t""yes" 1>&6
+  lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"
+else
+  echo "$ac_t""no" 1>&6
+echo $ac_n "checking for shl_load""... $ac_c" 1>&6
+echo "$progname:2288: checking for shl_load" >&5
+if eval "test \"`echo '$''{'ac_cv_func_shl_load'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 2293 "ltconfig"
+/* System header to define __stub macros and hopefully few prototypes,
+    which can conflict with char shl_load(); below.  */
+#include <assert.h>
+/* Override any gcc2 internal prototype to avoid an error.  */
+/* We use char because int might match the return type of a gcc2
+    builtin and then its argument prototype would still apply.  */
+char shl_load();
+
+int main() {
+
+/* The GNU C library defines this for functions which it implements
+    to always fail with ENOSYS.  Some functions are actually named
+    something starting with __ and the normal name is an alias.  */
+#if defined (__stub_shl_load) || defined (__stub___shl_load)
+choke me
+#else
+shl_load();
+#endif
+
+; return 0; }
+EOF
+if { (eval echo $progname:2315: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+  rm -rf conftest*
+  eval "ac_cv_func_shl_load=yes"
+else
+  echo "$progname: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  eval "ac_cv_func_shl_load=no"
+fi
+rm -f conftest*
+fi
+
+if eval "test \"`echo '$ac_cv_func_'shl_load`\" = yes"; then
+  echo "$ac_t""yes" 1>&6
+  lt_cv_dlopen="shl_load"
+else
+  echo "$ac_t""no" 1>&6
+echo $ac_n "checking for shl_load in -ldld""... $ac_c" 1>&6
+echo "$progname:2333: checking for shl_load in -ldld" >&5
+ac_lib_var=`echo dld'_'shl_load | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  ac_save_LIBS="$LIBS"
+LIBS="-ldld  $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 2341 "ltconfig"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error.  */
+/* We use char because int might match the return type of a gcc2
+    builtin and then its argument prototype would still apply.  */
+char shl_load();
+
+int main() {
+shl_load()
+; return 0; }
+EOF
+if { (eval echo $progname:2352: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+  rm -rf conftest*
+  eval "ac_cv_lib_$ac_lib_var=yes"
+else
+  echo "$progname: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+  echo "$ac_t""yes" 1>&6
+  lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+
+fi
+
+    
+fi
+
+  
+fi
+
+
+fi
+
+fi
+
+  if test "x$lt_cv_dlopen" != xno; then
+    enable_dlopen=yes
+  fi
+
+  case "$lt_cv_dlopen" in
+  dlopen)
+for ac_hdr in dlfcn.h; do
+ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
+echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
+echo "$progname:2395: checking for $ac_hdr" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 2400 "ltconfig"
+#include <$ac_hdr>
+int fnord = 0;
+EOF
+ac_try="$ac_compile conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo $progname:2405: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+  rm -rf conftest*
+  eval "ac_cv_header_$ac_safe=yes"
+else
+  echo "$ac_err" >&5
+  echo "$progname: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  eval "ac_cv_header_$ac_safe=no"
+fi
+rm -f conftest*
+fi
+if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
+  echo "$ac_t""yes" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+done
+
+    if test "x$ac_cv_header_dlfcn_h" = xyes; then
+      CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
+    fi
+    eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
+    LIBS="$lt_cv_dlopen_libs $LIBS"
+
+  echo $ac_n "checking whether a program can dlopen itself""... $ac_c" 1>&6
+echo "$progname:2433: checking whether a program can dlopen itself" >&5
+if test "${lt_cv_dlopen_self+set}" = set; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test "$cross_compiling" = yes; then
+    lt_cv_dlopen_self=cross
+  else
+    cat > conftest.c <<EOF
+#line 2441 "ltconfig"
+
+#if HAVE_DLFCN_H
+#include <dlfcn.h>
+#endif
+
+#include <stdio.h>
+
+#ifdef RTLD_GLOBAL
+# define LTDL_GLOBAL	RTLD_GLOBAL
+#else
+# ifdef DL_GLOBAL
+#  define LTDL_GLOBAL	DL_GLOBAL
+# else
+#  define LTDL_GLOBAL	0
+# endif
+#endif
+
+/* We may have to define LTDL_LAZY_OR_NOW in the command line if we
+   find out it does not work in some platform. */
+#ifndef LTDL_LAZY_OR_NOW
+# ifdef RTLD_LAZY
+#  define LTDL_LAZY_OR_NOW	RTLD_LAZY
+# else
+#  ifdef DL_LAZY
+#   define LTDL_LAZY_OR_NOW	DL_LAZY
+#  else
+#   ifdef RTLD_NOW
+#    define LTDL_LAZY_OR_NOW	RTLD_NOW
+#   else
+#    ifdef DL_NOW
+#     define LTDL_LAZY_OR_NOW	DL_NOW
+#    else
+#     define LTDL_LAZY_OR_NOW	0
+#    endif
+#   endif
+#  endif
+# endif
+#endif
+
+fnord() { int i=42;}
+main() { void *self, *ptr1, *ptr2; self=dlopen(0,LTDL_GLOBAL|LTDL_LAZY_OR_NOW);
+    if(self) { ptr1=dlsym(self,"fnord"); ptr2=dlsym(self,"_fnord");
+	       if(ptr1 || ptr2) { dlclose(self); exit(0); } } exit(1); } 
+
+EOF
+if { (eval echo $progname:2487: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
+then
+  lt_cv_dlopen_self=yes
+else
+  echo "$progname: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -fr conftest*
+  lt_cv_dlopen_self=no
+fi
+rm -fr conftest*
+fi
+
+fi
+
+echo "$ac_t""$lt_cv_dlopen_self" 1>&6
+
+  if test "$lt_cv_dlopen_self" = yes; then
+    LDFLAGS="$LDFLAGS $link_static_flag"
+  echo $ac_n "checking whether a statically linked program can dlopen itself""... $ac_c" 1>&6
+echo "$progname:2506: checking whether a statically linked program can dlopen itself" >&5
+if test "${lt_cv_dlopen_self_static+set}" = set; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test "$cross_compiling" = yes; then
+    lt_cv_dlopen_self_static=cross
+  else
+    cat > conftest.c <<EOF
+#line 2514 "ltconfig"
+
+#if HAVE_DLFCN_H
+#include <dlfcn.h>
+#endif
+
+#include <stdio.h>
+
+#ifdef RTLD_GLOBAL
+# define LTDL_GLOBAL	RTLD_GLOBAL
+#else
+# ifdef DL_GLOBAL
+#  define LTDL_GLOBAL	DL_GLOBAL
+# else
+#  define LTDL_GLOBAL	0
+# endif
+#endif
+
+/* We may have to define LTDL_LAZY_OR_NOW in the command line if we
+   find out it does not work in some platform. */
+#ifndef LTDL_LAZY_OR_NOW
+# ifdef RTLD_LAZY
+#  define LTDL_LAZY_OR_NOW	RTLD_LAZY
+# else
+#  ifdef DL_LAZY
+#   define LTDL_LAZY_OR_NOW	DL_LAZY
+#  else
+#   ifdef RTLD_NOW
+#    define LTDL_LAZY_OR_NOW	RTLD_NOW
+#   else
+#    ifdef DL_NOW
+#     define LTDL_LAZY_OR_NOW	DL_NOW
+#    else
+#     define LTDL_LAZY_OR_NOW	0
+#    endif
+#   endif
+#  endif
+# endif
+#endif
+
+fnord() { int i=42;}
+main() { void *self, *ptr1, *ptr2; self=dlopen(0,LTDL_GLOBAL|LTDL_LAZY_OR_NOW);
+    if(self) { ptr1=dlsym(self,"fnord"); ptr2=dlsym(self,"_fnord");
+    if(ptr1 || ptr2) { dlclose(self); exit(0); } } exit(1); } 
+
+EOF
+if { (eval echo $progname:2560: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
+then
+  lt_cv_dlopen_self_static=yes
+else
+  echo "$progname: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -fr conftest*
+  lt_cv_dlopen_self_static=no
+fi
+rm -fr conftest*
+fi
+
+fi
+
+echo "$ac_t""$lt_cv_dlopen_self_static" 1>&6
+fi
+    ;;
+  esac
+
+  case "$lt_cv_dlopen_self" in
+  yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
+  *) enable_dlopen_self=unknown ;;
+  esac
+
+  case "$lt_cv_dlopen_self_static" in
+  yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
+  *) enable_dlopen_self_static=unknown ;;
+  esac
+fi
+
+# Copy echo and quote the copy, instead of the original, because it is
+# used later.
+ltecho="$echo"
+if test "X$ltecho" = "X$CONFIG_SHELL $0 --fallback-echo"; then
+   ltecho="$CONFIG_SHELL \$0 --fallback-echo"
+fi
+LTSHELL="$SHELL"
+
+LTCONFIG_VERSION="$VERSION"
+
+# Only quote variables if we're using ltmain.sh.
+case "$ltmain" in
+*.sh)
+  # Now quote all the things that may contain metacharacters.
+  for var in ltecho old_CC old_CFLAGS old_CPPFLAGS \
+    old_LD old_LDFLAGS old_LIBS \
+    old_NM old_RANLIB old_LN_S old_DLLTOOL old_OBJDUMP old_AS \
+    AR CC LD LN_S NM LTSHELL LTCONFIG_VERSION \
+    reload_flag reload_cmds wl \
+    pic_flag link_static_flag no_builtin_flag export_dynamic_flag_spec \
+    thread_safe_flag_spec whole_archive_flag_spec libname_spec \
+    library_names_spec soname_spec \
+    RANLIB old_archive_cmds old_archive_from_new_cmds old_postinstall_cmds \
+    old_postuninstall_cmds archive_cmds archive_expsym_cmds postinstall_cmds postuninstall_cmds \
+    file_magic_cmd export_symbols_cmds deplibs_check_method allow_undefined_flag no_undefined_flag \
+    finish_cmds finish_eval global_symbol_pipe global_symbol_to_cdecl \
+    hardcode_libdir_flag_spec hardcode_libdir_separator  \
+    sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
+    compiler_c_o compiler_o_lo need_locks exclude_expsyms include_expsyms; do
+
+    case "$var" in
+    reload_cmds | old_archive_cmds | old_archive_from_new_cmds | \
+    old_postinstall_cmds | old_postuninstall_cmds | \
+    export_symbols_cmds | archive_cmds | archive_expsym_cmds | \
+    postinstall_cmds | postuninstall_cmds | \
+    finish_cmds | sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
+      # Double-quote double-evaled strings.
+      eval "$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
+      ;;
+    *)
+      eval "$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
+      ;;
+    esac
+  done
+
+  case "$ltecho" in
+  *'\$0 --fallback-echo"')
+    ltecho=`$echo "X$ltecho" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'`
+    ;;
+  esac
+
+  trap "$rm \"$ofile\"; exit 1" 1 2 15
+  echo "creating $ofile"
+  $rm "$ofile"
+  cat <<EOF > "$ofile"
+#! $SHELL
+
+# `$echo "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
+# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP)
+# NOTE: Changes made to this file will be lost: look at ltconfig or ltmain.sh.
+#
+# Copyright (C) 1996-1999 Free Software Foundation, Inc.
+# Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# Sed that helps us avoid accidentally triggering echo(1) options like -n.
+Xsed="sed -e s/^X//"
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+if test "\${CDPATH+set}" = set; then CDPATH=; export CDPATH; fi
+
+### BEGIN LIBTOOL CONFIG
+EOF
+  cfgfile="$ofile"
+  ;;
+
+*)
+  # Double-quote the variables that need it (for aesthetics).
+  for var in old_CC old_CFLAGS old_CPPFLAGS \
+    old_LD old_LDFLAGS old_LIBS \
+    old_NM old_RANLIB old_LN_S old_DLLTOOL old_OBJDUMP old_AS; do
+    eval "$var=\\\"\$var\\\""
+  done
+
+  # Just create a config file.
+  cfgfile="$ofile.cfg"
+  trap "$rm \"$cfgfile\"; exit 1" 1 2 15
+  echo "creating $cfgfile"
+  $rm "$cfgfile"
+  cat <<EOF > "$cfgfile"
+# `$echo "$cfgfile" | sed 's%^.*/%%'` - Libtool configuration file.
+# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP)
+EOF
+  ;;
+esac
+
+cat <<EOF >> "$cfgfile"
+# Libtool was configured as follows, on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+#
+# CC=$old_CC CFLAGS=$old_CFLAGS CPPFLAGS=$old_CPPFLAGS \\
+# LD=$old_LD LDFLAGS=$old_LDFLAGS LIBS=$old_LIBS \\
+# NM=$old_NM RANLIB=$old_RANLIB LN_S=$old_LN_S \\
+# DLLTOOL=$old_DLLTOOL OBJDUMP=$old_OBJDUMP AS=$old_AS \\
+#   $0$ltconfig_args
+#
+# Compiler and other test output produced by $progname, useful for
+# debugging $progname, is in ./config.log if it exists.
+
+# The version of $progname that generated this script.
+LTCONFIG_VERSION=$LTCONFIG_VERSION
+
+# Shell to use when invoking shell scripts.
+SHELL=$LTSHELL
+
+# Whether or not to build shared libraries.
+build_libtool_libs=$enable_shared
+
+# Whether or not to build static libraries.
+build_old_libs=$enable_static
+
+# Whether or not to optimize for fast installation.
+fast_install=$enable_fast_install
+
+# The host system.
+host_alias=$host_alias
+host=$host
+
+# An echo program that does not interpret backslashes.
+echo=$ltecho
+
+# The archiver.
+AR=$AR
+
+# The default C compiler.
+CC=$CC
+
+# The linker used to build libraries.
+LD=$LD
+
+# Whether we need hard or soft links.
+LN_S=$LN_S
+
+# A BSD-compatible nm program.
+NM=$NM
+
+# Used on cygwin: DLL creation program.
+DLLTOOL="$DLLTOOL"
+
+# Used on cygwin: object dumper.
+OBJDUMP="$OBJDUMP"
+
+# Used on cygwin: assembler.
+AS="$AS"
+
+# The name of the directory that contains temporary libtool files.
+objdir=$objdir
+
+# How to create reloadable object files.
+reload_flag=$reload_flag
+reload_cmds=$reload_cmds
+
+# How to pass a linker flag through the compiler.
+wl=$wl
+
+# Object file suffix (normally "o").
+objext="$objext"
+
+# Old archive suffix (normally "a").
+libext="$libext"
+
+# Executable file suffix (normally "").
+exeext="$exeext"
+
+# Additional compiler flags for building library objects.
+pic_flag=$pic_flag
+
+# Does compiler simultaneously support -c and -o options?
+compiler_c_o=$compiler_c_o
+
+# Can we write directly to a .lo ?
+compiler_o_lo=$compiler_o_lo
+
+# Must we lock files when doing compilation ?
+need_locks=$need_locks
+
+# Do we need the lib prefix for modules?
+need_lib_prefix=$need_lib_prefix
+
+# Do we need a version for libraries?
+need_version=$need_version
+
+# Whether dlopen is supported.
+dlopen=$enable_dlopen
+
+# Whether dlopen of programs is supported.
+dlopen_self=$enable_dlopen_self
+
+# Whether dlopen of statically linked programs is supported.
+dlopen_self_static=$enable_dlopen_self_static
+
+# Compiler flag to prevent dynamic linking.
+link_static_flag=$link_static_flag
+
+# Compiler flag to turn off builtin functions.
+no_builtin_flag=$no_builtin_flag
+
+# Compiler flag to allow reflexive dlopens.
+export_dynamic_flag_spec=$export_dynamic_flag_spec
+
+# Compiler flag to generate shared objects directly from archives.
+whole_archive_flag_spec=$whole_archive_flag_spec
+
+# Compiler flag to generate thread-safe objects.
+thread_safe_flag_spec=$thread_safe_flag_spec
+
+# Library versioning type.
+version_type=$version_type
+
+# Format of library name prefix.
+libname_spec=$libname_spec
+
+# List of archive names.  First name is the real one, the rest are links.
+# The last name is the one that the linker finds with -lNAME.
+library_names_spec=$library_names_spec
+
+# The coded name of the library, if different from the real name.
+soname_spec=$soname_spec
+
+# Commands used to build and install an old-style archive.
+RANLIB=$RANLIB
+old_archive_cmds=$old_archive_cmds
+old_postinstall_cmds=$old_postinstall_cmds
+old_postuninstall_cmds=$old_postuninstall_cmds
+
+# Create an old-style archive from a shared archive.
+old_archive_from_new_cmds=$old_archive_from_new_cmds
+
+# Commands used to build and install a shared archive.
+archive_cmds=$archive_cmds
+archive_expsym_cmds=$archive_expsym_cmds
+postinstall_cmds=$postinstall_cmds
+postuninstall_cmds=$postuninstall_cmds
+
+# Method to check whether dependent libraries are shared objects.
+deplibs_check_method=$deplibs_check_method
+
+# Command to use when deplibs_check_method == file_magic.
+file_magic_cmd=$file_magic_cmd
+
+# Flag that allows shared libraries with undefined symbols to be built.
+allow_undefined_flag=$allow_undefined_flag
+
+# Flag that forces no undefined symbols.
+no_undefined_flag=$no_undefined_flag
+
+# Commands used to finish a libtool library installation in a directory.
+finish_cmds=$finish_cmds
+
+# Same as above, but a single script fragment to be evaled but not shown.
+finish_eval=$finish_eval
+
+# Take the output of nm and produce a listing of raw symbols and C names.
+global_symbol_pipe=$global_symbol_pipe
+
+# Transform the output of nm in a proper C declaration
+global_symbol_to_cdecl=$global_symbol_to_cdecl
+
+# This is the shared library runtime path variable.
+runpath_var=$runpath_var
+
+# This is the shared library path variable.
+shlibpath_var=$shlibpath_var
+
+# Is shlibpath searched before the hard-coded library search path?
+shlibpath_overrides_runpath=$shlibpath_overrides_runpath
+
+# How to hardcode a shared library path into an executable.
+hardcode_action=$hardcode_action
+
+# Flag to hardcode \$libdir into a binary during linking.
+# This must work even if \$libdir does not exist.
+hardcode_libdir_flag_spec=$hardcode_libdir_flag_spec
+
+# Whether we need a single -rpath flag with a separated argument.
+hardcode_libdir_separator=$hardcode_libdir_separator
+
+# Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the
+# resulting binary.
+hardcode_direct=$hardcode_direct
+
+# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
+# resulting binary.
+hardcode_minus_L=$hardcode_minus_L
+
+# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
+# the resulting binary.
+hardcode_shlibpath_var=$hardcode_shlibpath_var
+
+# Compile-time system search path for libraries
+sys_lib_search_path_spec=$sys_lib_search_path_spec
+
+# Run-time system search path for libraries
+sys_lib_dlsearch_path_spec=$sys_lib_dlsearch_path_spec
+
+# Fix the shell variable \$srcfile for the compiler.
+fix_srcfile_path="$fix_srcfile_path"
+
+# Set to yes if exported symbols are required.
+always_export_symbols=$always_export_symbols
+
+# The commands to list exported symbols.
+export_symbols_cmds=$export_symbols_cmds
+
+# Symbols that should not be listed in the preloaded symbols.
+exclude_expsyms=$exclude_expsyms
+
+# Symbols that must always be exported.
+include_expsyms=$include_expsyms
+
+EOF
+
+case "$ltmain" in
+*.sh)
+  echo '### END LIBTOOL CONFIG' >> "$ofile"
+  echo >> "$ofile"
+  case "$host_os" in
+  aix3*)
+    cat <<\EOF >> "$ofile"
+
+# AIX sometimes has problems with the GCC collect2 program.  For some
+# reason, if we set the COLLECT_NAMES environment variable, the problems
+# vanish in a puff of smoke.
+if test "${COLLECT_NAMES+set}" != set; then
+  COLLECT_NAMES=
+  export COLLECT_NAMES
+fi
+EOF
+    ;;
+  esac
+
+  # Append the ltmain.sh script.
+  sed '$q' "$ltmain" >> "$ofile" || (rm -f "$ofile"; exit 1)
+
+  chmod +x "$ofile"
+  ;;
+
+*)
+  # Compile the libtool program.
+  echo "FIXME: would compile $ltmain"
+  ;;
+esac
+
+test -n "$cache_file" || exit 0
+
+# AC_CACHE_SAVE
+trap '' 1 2 15
+cat > confcache <<\EOF
+# This file is a shell script that caches the results of configure
+# tests run on this system so they can be shared between configure
+# scripts and configure runs.  It is not useful on other systems.
+# If it contains results you don't want to keep, you may remove or edit it.
+#
+# By default, configure uses ./config.cache as the cache file,
+# creating it if it does not exist already.  You can give configure
+# the --cache-file=FILE option to use a different cache file; that is
+# what configure does when it calls configure scripts in
+# subdirectories, so they share the cache.
+# Giving --cache-file=/dev/null disables caching, for debugging configure.
+# config.status only pays attention to the cache file if you give it the
+# --recheck option to rerun configure.
+#
+EOF
+# The following way of writing the cache mishandles newlines in values,
+# but we know of no workaround that is simple, portable, and efficient.
+# So, don't put newlines in cache variables' values.
+# Ultrix sh set writes to stderr and can't be redirected directly,
+# and sets the high bit in the cache file unless we assign to the vars.
+(set) 2>&1 |
+  case `(ac_space=' '; set | grep ac_space) 2>&1` in
+  *ac_space=\ *)
+    # `set' does not quote correctly, so add quotes (double-quote substitution
+    # turns \\\\ into \\, and sed turns \\ into \).
+    sed -n \
+      -e "s/'/'\\\\''/g" \
+      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
+    ;;
+  *)
+    # `set' quotes correctly as required by POSIX, so do not add quotes.
+    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
+    ;;
+  esac >> confcache
+if cmp -s $cache_file confcache; then
+  :
+else
+  if test -w $cache_file; then
+    echo "updating cache $cache_file"
+    cat confcache > $cache_file
+  else
+    echo "not updating unwritable cache $cache_file"
+  fi
+fi
+rm -f confcache
+
+exit 0
+
+# Local Variables:
+# mode:shell-script
+# sh-indentation:2
+# End: