summaryrefslogtreecommitdiff
path: root/recipes/linux/linux-2.6.22
diff options
context:
space:
mode:
Diffstat (limited to 'recipes/linux/linux-2.6.22')
-rw-r--r--recipes/linux/linux-2.6.22/bd-neon/defconfig1411
-rw-r--r--recipes/linux/linux-2.6.22/cm-x270/0001-cm-x270-base2.patch2850
-rw-r--r--recipes/linux/linux-2.6.22/cm-x270/0002-cm-x270-match-type.patch25
-rw-r--r--recipes/linux/linux-2.6.22/cm-x270/0003-cm-x270-ide.patch186
-rw-r--r--recipes/linux/linux-2.6.22/cm-x270/0004-cm-x270-it8152.patch496
-rw-r--r--recipes/linux/linux-2.6.22/cm-x270/0005-cm-x270-pcmcia.patch228
-rw-r--r--recipes/linux/linux-2.6.22/cm-x270/0006-ramdisk_load.patch80
-rw-r--r--recipes/linux/linux-2.6.22/cm-x270/0007-mmcsd_large_cards-r0.patch36
-rw-r--r--recipes/linux/linux-2.6.22/cm-x270/0008-cm-x270-nand-simplify-name.patch25
-rw-r--r--recipes/linux/linux-2.6.22/cm-x270/0009-cursor-fix.patch43
-rw-r--r--recipes/linux/linux-2.6.22/cm-x270/defconfig1234
11 files changed, 6614 insertions, 0 deletions
diff --git a/recipes/linux/linux-2.6.22/bd-neon/defconfig b/recipes/linux/linux-2.6.22/bd-neon/defconfig
new file mode 100644
index 0000000000..183594674b
--- /dev/null
+++ b/recipes/linux/linux-2.6.22/bd-neon/defconfig
@@ -0,0 +1,1411 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.22
+# Tue Feb 12 16:12:07 2008
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+# CONFIG_GENERIC_CLOCKEVENTS is not set
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SWAP is not set
+# CONFIG_SYSVIPC is not set
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_PNX4008 is not set
+CONFIG_ARCH_PXA=y
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+
+#
+# Intel PXA2xx Implementations
+#
+# CONFIG_ARCH_LUBBOCK is not set
+# CONFIG_MACH_LOGICPD_PXA270 is not set
+# CONFIG_MACH_MAINSTONE is not set
+# CONFIG_MACH_ARGON is not set
+CONFIG_MACH_NEON=y
+# CONFIG_MACH_NEON270 is not set
+# CONFIG_ARCH_PXA_IDP is not set
+# CONFIG_PXA_SHARPSL is not set
+# CONFIG_MACH_TRIZEPS4 is not set
+CONFIG_PXA25x=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_XSCALE=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_OUTER_CACHE is not set
+# CONFIG_IWMMXT is not set
+CONFIG_XSCALE_PMU=y
+
+#
+# Bus support
+#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_PREEMPT is not set
+# CONFIG_NO_IDLE_HZ is not set
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=" debug "
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_EXT=y
+# CONFIG_MAC80211 is not set
+CONFIG_IEEE80211=y
+CONFIG_IEEE80211_DEBUG=y
+CONFIG_IEEE80211_CRYPT_WEP=y
+CONFIG_IEEE80211_CRYPT_CCMP=y
+CONFIG_IEEE80211_CRYPT_TKIP=y
+CONFIG_IEEE80211_SOFTMAC=y
+CONFIG_IEEE80211_SOFTMAC_DEBUG=y
+# CONFIG_RFKILL is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_FW_LOADER=y
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=y
+# CONFIG_PROC_EVENTS is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+# CONFIG_MTD_BLOCK is not set
+CONFIG_MTD_BLOCK_RO=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_XIP is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x0
+CONFIG_MTD_PHYSMAP_LEN=0x2000000
+CONFIG_MTD_PHYSMAP_BANKWIDTH=4
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_SHARP_SL is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+# CONFIG_PNPACPI is not set
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_ATA is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+CONFIG_SMC91X=y
+# CONFIG_DM9000 is not set
+# CONFIG_SMC911X is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+CONFIG_USB_PEGASUS=y
+CONFIG_USB_RTL8150=y
+# CONFIG_USB_USBNET_MII is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_TSDEV=y
+CONFIG_INPUT_TSDEV_SCREEN_X=800
+CONFIG_INPUT_TSDEV_SCREEN_Y=480
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_GPIO is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+# CONFIG_MOUSE_PS2_ALPS is not set
+# CONFIG_MOUSE_PS2_LOGIPS2PP is not set
+# CONFIG_MOUSE_PS2_SYNAPTICS is not set
+# CONFIG_MOUSE_PS2_LIFEBOOK is not set
+# CONFIG_MOUSE_PS2_TRACKPOINT is not set
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+CONFIG_TOUCHSCREEN_UCB1400=y
+CONFIG_TOUCHSCREEN_USB_COMPOSITE=m
+CONFIG_TOUCHSCREEN_USB_EGALAX=y
+CONFIG_TOUCHSCREEN_USB_PANJIT=y
+CONFIG_TOUCHSCREEN_USB_3M=y
+CONFIG_TOUCHSCREEN_USB_ITM=y
+CONFIG_TOUCHSCREEN_USB_ETURBO=y
+CONFIG_TOUCHSCREEN_USB_GUNZE=y
+CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_SERPORT is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_PXA_GPIO=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_PXA=y
+CONFIG_SERIAL_PXA_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_SA1100_WATCHDOG=y
+# CONFIG_SA1100_WATCHDOG_TICK is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_CHARDEV is not set
+
+#
+# I2C Algorithms
+#
+CONFIG_I2C_ALGOBIT=m
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_PXA is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Misc devices
+#
+CONFIG_BD_GENTIMER=y
+
+#
+# Multifunction device drivers
+#
+CONFIG_MFD_SM501=y
+
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+CONFIG_FB=y
+CONFIG_FIRMWARE_EDID=y
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_PXA is not set
+# CONFIG_FB_MBX is not set
+CONFIG_FB_SM501=y
+CONFIG_FB_SM501MEM=y
+CONFIG_FB_SM501YUV=y
+CONFIG_FB_SM501ALPHA=y
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+# CONFIG_FONT_8x8 is not set
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+
+#
+# Sound
+#
+CONFIG_SOUND=y
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+# CONFIG_SND_SEQUENCER is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+CONFIG_SND_VERBOSE_PRINTK=y
+CONFIG_SND_DEBUG=y
+# CONFIG_SND_DEBUG_DETECT is not set
+# CONFIG_SND_PCM_XRUN_DEBUG is not set
+
+#
+# Generic devices
+#
+CONFIG_SND_AC97_CODEC=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# ALSA ARM devices
+#
+CONFIG_SND_PXA2XX_PCM=y
+CONFIG_SND_PXA2XX_AC97=y
+
+#
+# USB devices
+#
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_CAIAQ is not set
+
+#
+# System on Chip audio support
+#
+# CONFIG_SND_SOC is not set
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+
+#
+# Multimedia Capabilities Port drivers
+#
+CONFIG_UCB1400_TS=y
+CONFIG_UCB1400_TS_FIVE_WIRE=y
+CONFIG_AC97_BUS=y
+
+#
+# HID Devices
+#
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+CONFIG_USB_HIDDEV=y
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_SM501=y
+# CONFIG_USB_SL811_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+CONFIG_USB_PRINTER=y
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+CONFIG_USB_LIBUSUAL=y
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+# CONFIG_USB_MON is not set
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+CONFIG_USB_SERIAL=m
+CONFIG_USB_SERIAL_GENERIC=y
+# CONFIG_USB_SERIAL_AIRCABLE is not set
+# CONFIG_USB_SERIAL_AIRPRIME is not set
+# CONFIG_USB_SERIAL_ARK3116 is not set
+# CONFIG_USB_SERIAL_BELKIN is not set
+# CONFIG_USB_SERIAL_WHITEHEAT is not set
+# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
+# CONFIG_USB_SERIAL_CP2101 is not set
+# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
+# CONFIG_USB_SERIAL_EMPEG is not set
+# CONFIG_USB_SERIAL_FTDI_SIO is not set
+# CONFIG_USB_SERIAL_FUNSOFT is not set
+# CONFIG_USB_SERIAL_VISOR is not set
+# CONFIG_USB_SERIAL_IPAQ is not set
+# CONFIG_USB_SERIAL_IR is not set
+# CONFIG_USB_SERIAL_EDGEPORT is not set
+# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
+# CONFIG_USB_SERIAL_GARMIN is not set
+# CONFIG_USB_SERIAL_IPW is not set
+# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
+CONFIG_USB_SERIAL_KEYSPAN=m
+# CONFIG_USB_SERIAL_KEYSPAN_MPR is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set
+CONFIG_USB_SERIAL_KEYSPAN_USA19=y
+# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA19QW is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA19QI is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA49WLC is not set
+# CONFIG_USB_SERIAL_KLSI is not set
+# CONFIG_USB_SERIAL_KOBIL_SCT is not set
+# CONFIG_USB_SERIAL_MCT_U232 is not set
+# CONFIG_USB_SERIAL_MOS7720 is not set
+# CONFIG_USB_SERIAL_MOS7840 is not set
+# CONFIG_USB_SERIAL_NAVMAN is not set
+# CONFIG_USB_SERIAL_PL2303 is not set
+# CONFIG_USB_SERIAL_HP4X is not set
+# CONFIG_USB_SERIAL_SAFE is not set
+# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
+# CONFIG_USB_SERIAL_TI is not set
+# CONFIG_USB_SERIAL_CYBERJACK is not set
+# CONFIG_USB_SERIAL_XIRCOM is not set
+# CONFIG_USB_SERIAL_OPTION is not set
+# CONFIG_USB_SERIAL_OMNINET is not set
+# CONFIG_USB_SERIAL_DEBUG is not set
+CONFIG_USB_EZUSB=y
+CONFIG_AT91SAM7X=m
+CONFIG_AT91SAM7X_SERIAL=m
+CONFIG_AT91SAM7X_FLASH=m
+CONFIG_AT91SAM7X_FRAM=m
+CONFIG_AT91SAM7X_ETHER=m
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+CONFIG_USB_GADGET_PXA2XX=y
+CONFIG_USB_PXA2XX=y
+CONFIG_USB_PXA2XX_SMALL=y
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_ETH is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+CONFIG_USB_G_SERIAL=y
+# CONFIG_USB_MIDI_GADGET is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+
+#
+# MMC/SD Host Controller Drivers
+#
+CONFIG_MMC_PXA=y
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+# CONFIG_NFS_V3 is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Profiling support
+#
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=y
+
+#
+# Kernel hacking
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_CBC is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+CONFIG_CRYPTO_AES=y
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+CONFIG_CRYPTO_ARC4=y
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/recipes/linux/linux-2.6.22/cm-x270/0001-cm-x270-base2.patch b/recipes/linux/linux-2.6.22/cm-x270/0001-cm-x270-base2.patch
new file mode 100644
index 0000000000..9a635c5cbc
--- /dev/null
+++ b/recipes/linux/linux-2.6.22/cm-x270/0001-cm-x270-base2.patch
@@ -0,0 +1,2850 @@
+From 0db989f536f29c343bb4e42dc0b34d892d86de60 Mon Sep 17 00:00:00 2001
+From: Cliff Brake <cbrake@happy.dev.bec-systems.com>
+Date: Fri, 20 Jul 2007 18:55:59 -0400
+Subject: [PATCH] cm-x270-base2
+
+---
+ arch/arm/Kconfig | 8 +-
+ arch/arm/configs/cm_x270_defconfig | 1567 +++++++++++++++++++++++++++++++++++
+ arch/arm/mach-pxa/Kconfig | 5 +
+ arch/arm/mach-pxa/Makefile | 7 +
+ arch/arm/mach-pxa/cm-x270.c | 821 ++++++++++++++++++
+ drivers/leds/Kconfig | 6 +
+ drivers/leds/Makefile | 1 +
+ drivers/leds/leds-cm-x270.c | 126 +++
+ drivers/net/Kconfig | 8 +
+ drivers/net/dm9000.c | 6 +
+ include/asm-arm/arch-pxa/cm-x270.h | 71 ++
+ include/asm-arm/arch-pxa/hardware.h | 11 +
+ include/asm-arm/arch-pxa/irqs.h | 20 +
+ include/asm-arm/memory.h | 10 +
+ 14 files changed, 2666 insertions(+), 1 deletions(-)
+ create mode 100644 arch/arm/configs/cm_x270_defconfig
+ create mode 100644 arch/arm/mach-pxa/cm-x270.c
+ create mode 100644 drivers/leds/leds-cm-x270.c
+ create mode 100644 include/asm-arm/arch-pxa/cm-x270.h
+
+diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
+index 50d9f3e..dec0a27 100644
+--- a/arch/arm/Kconfig
++++ b/arch/arm/Kconfig
+@@ -519,7 +519,7 @@ config ISA_DMA_API
+ bool
+
+ config PCI
+- bool "PCI support" if ARCH_INTEGRATOR_AP || ARCH_VERSATILE_PB || ARCH_IXP4XX || ARCH_KS8695
++ bool "PCI support" if ARCH_INTEGRATOR_AP || ARCH_VERSATILE_PB || ARCH_IXP4XX || ARCH_KS8695 || MACH_ARMCORE
+ help
+ Find out whether you have a PCI motherboard. PCI is the name of a
+ bus system, i.e. the way the CPU talks to the other stuff inside
+@@ -537,6 +537,12 @@ config PCI_HOST_VIA82C505
+ depends on PCI && ARCH_SHARK
+ default y
+
++config PCI_HOST_ITE8152
++ bool
++ depends on PCI && MACH_ARMCORE
++ default y
++ select DMABOUNCE
++
+ source "drivers/pci/Kconfig"
+
+ source "drivers/pcmcia/Kconfig"
+diff --git a/arch/arm/configs/cm_x270_defconfig b/arch/arm/configs/cm_x270_defconfig
+new file mode 100644
+index 0000000..f728363
+--- /dev/null
++++ b/arch/arm/configs/cm_x270_defconfig
+@@ -0,0 +1,1567 @@
++#
++# Automatically generated make config: don't edit
++# Linux kernel version: 2.6.21-rc4
++# Wed Apr 4 16:42:03 2007
++#
++CONFIG_ARM=y
++CONFIG_SYS_SUPPORTS_APM_EMULATION=y
++CONFIG_GENERIC_GPIO=y
++CONFIG_GENERIC_TIME=y
++CONFIG_MMU=y
++# CONFIG_NO_IOPORT is not set
++CONFIG_GENERIC_HARDIRQS=y
++CONFIG_TRACE_IRQFLAGS_SUPPORT=y
++CONFIG_HARDIRQS_SW_RESEND=y
++CONFIG_GENERIC_IRQ_PROBE=y
++CONFIG_RWSEM_GENERIC_SPINLOCK=y
++# CONFIG_ARCH_HAS_ILOG2_U32 is not set
++# CONFIG_ARCH_HAS_ILOG2_U64 is not set
++CONFIG_GENERIC_HWEIGHT=y
++CONFIG_GENERIC_CALIBRATE_DELAY=y
++CONFIG_ZONE_DMA=y
++CONFIG_ARCH_MTD_XIP=y
++CONFIG_VECTORS_BASE=0xffff0000
++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
++
++#
++# Code maturity level options
++#
++CONFIG_EXPERIMENTAL=y
++CONFIG_BROKEN_ON_SMP=y
++CONFIG_INIT_ENV_ARG_LIMIT=32
++
++#
++# General setup
++#
++CONFIG_LOCALVERSION=""
++# CONFIG_LOCALVERSION_AUTO is not set
++CONFIG_SWAP=y
++CONFIG_SYSVIPC=y
++# CONFIG_IPC_NS is not set
++CONFIG_SYSVIPC_SYSCTL=y
++# CONFIG_POSIX_MQUEUE is not set
++# CONFIG_BSD_PROCESS_ACCT is not set
++# CONFIG_TASKSTATS is not set
++# CONFIG_UTS_NS is not set
++# CONFIG_AUDIT is not set
++CONFIG_IKCONFIG=y
++CONFIG_IKCONFIG_PROC=y
++CONFIG_SYSFS_DEPRECATED=y
++# CONFIG_RELAY is not set
++CONFIG_BLK_DEV_INITRD=y
++CONFIG_INITRAMFS_SOURCE=""
++CONFIG_CC_OPTIMIZE_FOR_SIZE=y
++CONFIG_SYSCTL=y
++CONFIG_EMBEDDED=y
++CONFIG_UID16=y
++CONFIG_SYSCTL_SYSCALL=y
++CONFIG_KALLSYMS=y
++# CONFIG_KALLSYMS_ALL is not set
++# CONFIG_KALLSYMS_EXTRA_PASS is not set
++CONFIG_HOTPLUG=y
++CONFIG_PRINTK=y
++CONFIG_BUG=y
++CONFIG_ELF_CORE=y
++CONFIG_BASE_FULL=y
++CONFIG_FUTEX=y
++CONFIG_EPOLL=y
++CONFIG_SHMEM=y
++CONFIG_SLAB=y
++CONFIG_VM_EVENT_COUNTERS=y
++CONFIG_RT_MUTEXES=y
++# CONFIG_TINY_SHMEM is not set
++CONFIG_BASE_SMALL=0
++# CONFIG_SLOB is not set
++
++#
++# Loadable module support
++#
++CONFIG_MODULES=y
++CONFIG_MODULE_UNLOAD=y
++CONFIG_MODULE_FORCE_UNLOAD=y
++# CONFIG_MODVERSIONS is not set
++# CONFIG_MODULE_SRCVERSION_ALL is not set
++CONFIG_KMOD=y
++
++#
++# Block layer
++#
++CONFIG_BLOCK=y
++# CONFIG_LBD is not set
++# CONFIG_BLK_DEV_IO_TRACE is not set
++# CONFIG_LSF is not set
++
++#
++# IO Schedulers
++#
++CONFIG_IOSCHED_NOOP=y
++CONFIG_IOSCHED_AS=y
++CONFIG_IOSCHED_DEADLINE=y
++CONFIG_IOSCHED_CFQ=y
++CONFIG_DEFAULT_AS=y
++# CONFIG_DEFAULT_DEADLINE is not set
++# CONFIG_DEFAULT_CFQ is not set
++# CONFIG_DEFAULT_NOOP is not set
++CONFIG_DEFAULT_IOSCHED="anticipatory"
++
++#
++# System Type
++#
++# CONFIG_ARCH_AAEC2000 is not set
++# CONFIG_ARCH_INTEGRATOR is not set
++# CONFIG_ARCH_REALVIEW is not set
++# CONFIG_ARCH_VERSATILE is not set
++# CONFIG_ARCH_AT91 is not set
++# CONFIG_ARCH_CLPS7500 is not set
++# CONFIG_ARCH_CLPS711X is not set
++# CONFIG_ARCH_CO285 is not set
++# CONFIG_ARCH_EBSA110 is not set
++# CONFIG_ARCH_EP93XX is not set
++# CONFIG_ARCH_FOOTBRIDGE is not set
++# CONFIG_ARCH_NETX is not set
++# CONFIG_ARCH_H720X is not set
++# CONFIG_ARCH_IMX is not set
++# CONFIG_ARCH_IOP32X is not set
++# CONFIG_ARCH_IOP33X is not set
++# CONFIG_ARCH_IOP13XX is not set
++# CONFIG_ARCH_IXP4XX is not set
++# CONFIG_ARCH_IXP2000 is not set
++# CONFIG_ARCH_IXP23XX is not set
++# CONFIG_ARCH_L7200 is not set
++# CONFIG_ARCH_NS9XXX is not set
++# CONFIG_ARCH_PNX4008 is not set
++CONFIG_ARCH_PXA=y
++# CONFIG_ARCH_RPC is not set
++# CONFIG_ARCH_SA1100 is not set
++# CONFIG_ARCH_S3C2410 is not set
++# CONFIG_ARCH_SHARK is not set
++# CONFIG_ARCH_LH7A40X is not set
++# CONFIG_ARCH_OMAP is not set
++CONFIG_DMABOUNCE=y
++
++#
++# Intel PXA2xx Implementations
++#
++# CONFIG_ARCH_LUBBOCK is not set
++# CONFIG_MACH_LOGICPD_PXA270 is not set
++# CONFIG_MACH_MAINSTONE is not set
++# CONFIG_ARCH_PXA_IDP is not set
++# CONFIG_PXA_SHARPSL is not set
++# CONFIG_MACH_TRIZEPS4 is not set
++CONFIG_MACH_ARMCORE=y
++CONFIG_PXA27x=y
++
++#
++# Processor Type
++#
++CONFIG_CPU_32=y
++CONFIG_CPU_XSCALE=y
++CONFIG_CPU_32v5=y
++CONFIG_CPU_ABRT_EV5T=y
++CONFIG_CPU_CACHE_VIVT=y
++CONFIG_CPU_TLB_V4WBI=y
++CONFIG_CPU_CP15=y
++CONFIG_CPU_CP15_MMU=y
++
++#
++# Processor Features
++#
++CONFIG_ARM_THUMB=y
++# CONFIG_CPU_DCACHE_DISABLE is not set
++# CONFIG_OUTER_CACHE is not set
++CONFIG_IWMMXT=y
++CONFIG_XSCALE_PMU=y
++
++#
++# Bus support
++#
++CONFIG_PCI=y
++CONFIG_PCI_HOST_ITE8152=y
++# CONFIG_PCI_DEBUG is not set
++
++#
++# PCCARD (PCMCIA/CardBus) support
++#
++CONFIG_PCCARD=y
++# CONFIG_PCMCIA_DEBUG is not set
++CONFIG_PCMCIA=m
++# CONFIG_PCMCIA_LOAD_CIS is not set
++CONFIG_PCMCIA_IOCTL=y
++CONFIG_CARDBUS=y
++
++#
++# PC-card bridges
++#
++# CONFIG_YENTA is not set
++# CONFIG_PD6729 is not set
++# CONFIG_I82092 is not set
++CONFIG_PCMCIA_PXA2XX=m
++
++#
++# Kernel Features
++#
++# CONFIG_PREEMPT is not set
++# CONFIG_NO_IDLE_HZ is not set
++CONFIG_HZ=100
++# CONFIG_AEABI is not set
++# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
++CONFIG_SELECT_MEMORY_MODEL=y
++CONFIG_FLATMEM_MANUAL=y
++# CONFIG_DISCONTIGMEM_MANUAL is not set
++# CONFIG_SPARSEMEM_MANUAL is not set
++CONFIG_FLATMEM=y
++CONFIG_FLAT_NODE_MEM_MAP=y
++# CONFIG_SPARSEMEM_STATIC is not set
++CONFIG_SPLIT_PTLOCK_CPUS=4096
++# CONFIG_RESOURCES_64BIT is not set
++CONFIG_ZONE_DMA_FLAG=1
++CONFIG_ALIGNMENT_TRAP=y
++
++#
++# Boot options
++#
++CONFIG_ZBOOT_ROM_TEXT=0x0
++CONFIG_ZBOOT_ROM_BSS=0x0
++CONFIG_CMDLINE=""
++# CONFIG_XIP_KERNEL is not set
++# CONFIG_KEXEC is not set
++
++#
++# Floating point emulation
++#
++
++#
++# At least one emulation must be selected
++#
++CONFIG_FPE_NWFPE=y
++# CONFIG_FPE_NWFPE_XP is not set
++# CONFIG_FPE_FASTFPE is not set
++
++#
++# Userspace binary formats
++#
++CONFIG_BINFMT_ELF=y
++# CONFIG_BINFMT_AOUT is not set
++# CONFIG_BINFMT_MISC is not set
++# CONFIG_ARTHUR is not set
++
++#
++# Power management options
++#
++CONFIG_PM=y
++# CONFIG_PM_LEGACY is not set
++# CONFIG_PM_DEBUG is not set
++# CONFIG_PM_SYSFS_DEPRECATED is not set
++# CONFIG_APM_EMULATION is not set
++
++#
++# Networking
++#
++CONFIG_NET=y
++
++#
++# Networking options
++#
++# CONFIG_NETDEBUG is not set
++CONFIG_PACKET=y
++# CONFIG_PACKET_MMAP is not set
++CONFIG_UNIX=y
++CONFIG_XFRM=y
++# CONFIG_XFRM_USER is not set
++# CONFIG_XFRM_SUB_POLICY is not set
++# CONFIG_XFRM_MIGRATE is not set
++# CONFIG_NET_KEY is not set
++CONFIG_INET=y
++# CONFIG_IP_MULTICAST is not set
++# CONFIG_IP_ADVANCED_ROUTER is not set
++CONFIG_IP_FIB_HASH=y
++CONFIG_IP_PNP=y
++CONFIG_IP_PNP_DHCP=y
++CONFIG_IP_PNP_BOOTP=y
++# CONFIG_IP_PNP_RARP is not set
++# CONFIG_NET_IPIP is not set
++# CONFIG_NET_IPGRE is not set
++# CONFIG_ARPD is not set
++# CONFIG_SYN_COOKIES is not set
++# CONFIG_INET_AH is not set
++# CONFIG_INET_ESP is not set
++# CONFIG_INET_IPCOMP is not set
++# CONFIG_INET_XFRM_TUNNEL is not set
++# CONFIG_INET_TUNNEL is not set
++CONFIG_INET_XFRM_MODE_TRANSPORT=y
++CONFIG_INET_XFRM_MODE_TUNNEL=y
++CONFIG_INET_XFRM_MODE_BEET=y
++CONFIG_INET_DIAG=y
++CONFIG_INET_TCP_DIAG=y
++# CONFIG_TCP_CONG_ADVANCED is not set
++CONFIG_TCP_CONG_CUBIC=y
++CONFIG_DEFAULT_TCP_CONG="cubic"
++# CONFIG_TCP_MD5SIG is not set
++# CONFIG_IPV6 is not set
++# CONFIG_INET6_XFRM_TUNNEL is not set
++# CONFIG_INET6_TUNNEL is not set
++# CONFIG_NETWORK_SECMARK is not set
++# CONFIG_NETFILTER is not set
++
++#
++# DCCP Configuration (EXPERIMENTAL)
++#
++# CONFIG_IP_DCCP is not set
++
++#
++# SCTP Configuration (EXPERIMENTAL)
++#
++# CONFIG_IP_SCTP is not set
++
++#
++# TIPC Configuration (EXPERIMENTAL)
++#
++# CONFIG_TIPC is not set
++# CONFIG_ATM is not set
++# CONFIG_BRIDGE is not set
++# CONFIG_VLAN_8021Q is not set
++# CONFIG_DECNET is not set
++# CONFIG_LLC2 is not set
++# CONFIG_IPX is not set
++# CONFIG_ATALK is not set
++# CONFIG_X25 is not set
++# CONFIG_LAPB is not set
++# CONFIG_ECONET is not set
++# CONFIG_WAN_ROUTER is not set
++
++#
++# QoS and/or fair queueing
++#
++# CONFIG_NET_SCHED is not set
++
++#
++# Network testing
++#
++# CONFIG_NET_PKTGEN is not set
++# CONFIG_HAMRADIO is not set
++# CONFIG_IRDA is not set
++# CONFIG_BT is not set
++CONFIG_IEEE80211=m
++# CONFIG_IEEE80211_DEBUG is not set
++CONFIG_IEEE80211_CRYPT_WEP=m
++CONFIG_IEEE80211_CRYPT_CCMP=m
++# CONFIG_IEEE80211_CRYPT_TKIP is not set
++# CONFIG_IEEE80211_SOFTMAC is not set
++CONFIG_WIRELESS_EXT=y
++
++#
++# Device Drivers
++#
++
++#
++# Generic Driver Options
++#
++CONFIG_STANDALONE=y
++CONFIG_PREVENT_FIRMWARE_BUILD=y
++CONFIG_FW_LOADER=y
++# CONFIG_DEBUG_DRIVER is not set
++# CONFIG_DEBUG_DEVRES is not set
++# CONFIG_SYS_HYPERVISOR is not set
++
++#
++# Connector - unified userspace <-> kernelspace linker
++#
++# CONFIG_CONNECTOR is not set
++
++#
++# Memory Technology Devices (MTD)
++#
++CONFIG_MTD=m
++# CONFIG_MTD_DEBUG is not set
++# CONFIG_MTD_CONCAT is not set
++CONFIG_MTD_PARTITIONS=y
++# CONFIG_MTD_REDBOOT_PARTS is not set
++# CONFIG_MTD_AFS_PARTS is not set
++
++#
++# User Modules And Translation Layers
++#
++CONFIG_MTD_CHAR=m
++CONFIG_MTD_BLKDEVS=m
++CONFIG_MTD_BLOCK=m
++# CONFIG_MTD_BLOCK_RO is not set
++# CONFIG_FTL is not set
++# CONFIG_NFTL is not set
++# CONFIG_INFTL is not set
++# CONFIG_RFD_FTL is not set
++# CONFIG_SSFDC is not set
++
++#
++# RAM/ROM/Flash chip drivers
++#
++# CONFIG_MTD_CFI is not set
++# CONFIG_MTD_JEDECPROBE is not set
++CONFIG_MTD_MAP_BANK_WIDTH_1=y
++CONFIG_MTD_MAP_BANK_WIDTH_2=y
++CONFIG_MTD_MAP_BANK_WIDTH_4=y
++# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
++CONFIG_MTD_CFI_I1=y
++CONFIG_MTD_CFI_I2=y
++# CONFIG_MTD_CFI_I4 is not set
++# CONFIG_MTD_CFI_I8 is not set
++# CONFIG_MTD_RAM is not set
++# CONFIG_MTD_ROM is not set
++# CONFIG_MTD_ABSENT is not set
++# CONFIG_MTD_OBSOLETE_CHIPS is not set
++
++#
++# Mapping drivers for chip access
++#
++# CONFIG_MTD_COMPLEX_MAPPINGS is not set
++# CONFIG_MTD_SHARP_SL is not set
++# CONFIG_MTD_PLATRAM is not set
++
++#
++# Self-contained MTD device drivers
++#
++# CONFIG_MTD_PMC551 is not set
++# CONFIG_MTD_SLRAM is not set
++# CONFIG_MTD_PHRAM is not set
++# CONFIG_MTD_MTDRAM is not set
++# CONFIG_MTD_BLOCK2MTD is not set
++
++#
++# Disk-On-Chip Device Drivers
++#
++# CONFIG_MTD_DOC2000 is not set
++# CONFIG_MTD_DOC2001 is not set
++# CONFIG_MTD_DOC2001PLUS is not set
++
++#
++# NAND Flash Device Drivers
++#
++CONFIG_MTD_NAND=m
++# CONFIG_MTD_NAND_VERIFY_WRITE is not set
++# CONFIG_MTD_NAND_ECC_SMC is not set
++# CONFIG_MTD_NAND_H1900 is not set
++CONFIG_MTD_NAND_IDS=m
++# CONFIG_MTD_NAND_DISKONCHIP is not set
++# CONFIG_MTD_NAND_SHARPSL is not set
++# CONFIG_MTD_NAND_CAFE is not set
++CONFIG_MTD_NAND_CM_X270=m
++# CONFIG_MTD_NAND_NANDSIM is not set
++
++#
++# OneNAND Flash Device Drivers
++#
++# CONFIG_MTD_ONENAND is not set
++
++#
++# Parallel port support
++#
++# CONFIG_PARPORT is not set
++
++#
++# Plug and Play support
++#
++# CONFIG_PNPACPI is not set
++
++#
++# Block devices
++#
++# CONFIG_BLK_CPQ_DA is not set
++# CONFIG_BLK_CPQ_CISS_DA is not set
++# CONFIG_BLK_DEV_DAC960 is not set
++# CONFIG_BLK_DEV_UMEM is not set
++# CONFIG_BLK_DEV_COW_COMMON is not set
++CONFIG_BLK_DEV_LOOP=y
++# CONFIG_BLK_DEV_CRYPTOLOOP is not set
++# CONFIG_BLK_DEV_NBD is not set
++# CONFIG_BLK_DEV_SX8 is not set
++# CONFIG_BLK_DEV_UB is not set
++CONFIG_BLK_DEV_RAM=y
++CONFIG_BLK_DEV_RAM_COUNT=16
++CONFIG_BLK_DEV_RAM_SIZE=12000
++CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
++# CONFIG_CDROM_PKTCDVD is not set
++# CONFIG_ATA_OVER_ETH is not set
++
++#
++# ATA/ATAPI/MFM/RLL support
++#
++CONFIG_IDE=m
++CONFIG_IDE_MAX_HWIFS=4
++CONFIG_BLK_DEV_IDE=m
++
++#
++# Please see Documentation/ide.txt for help/info on IDE drives
++#
++# CONFIG_BLK_DEV_IDE_SATA is not set
++CONFIG_BLK_DEV_IDEDISK=m
++# CONFIG_IDEDISK_MULTI_MODE is not set
++CONFIG_BLK_DEV_IDECS=m
++# CONFIG_BLK_DEV_DELKIN is not set
++CONFIG_BLK_DEV_IDECD=m
++# CONFIG_BLK_DEV_IDETAPE is not set
++# CONFIG_BLK_DEV_IDEFLOPPY is not set
++# CONFIG_BLK_DEV_IDESCSI is not set
++# CONFIG_IDE_TASK_IOCTL is not set
++
++#
++# IDE chipset support/bugfixes
++#
++# CONFIG_IDE_GENERIC is not set
++# CONFIG_BLK_DEV_IDEPCI is not set
++# CONFIG_IDE_ARM is not set
++CONFIG_BLK_DEV_IDE_CM_X270=m
++# CONFIG_BLK_DEV_IDEDMA is not set
++# CONFIG_BLK_DEV_HD is not set
++
++#
++# SCSI device support
++#
++# CONFIG_RAID_ATTRS is not set
++CONFIG_SCSI=y
++# CONFIG_SCSI_TGT is not set
++# CONFIG_SCSI_NETLINK is not set
++# CONFIG_SCSI_PROC_FS is not set
++
++#
++# SCSI support type (disk, tape, CD-ROM)
++#
++CONFIG_BLK_DEV_SD=y
++# CONFIG_CHR_DEV_ST is not set
++# CONFIG_CHR_DEV_OSST is not set
++# CONFIG_BLK_DEV_SR is not set
++# CONFIG_CHR_DEV_SG is not set
++# CONFIG_CHR_DEV_SCH is not set
++
++#
++# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
++#
++# CONFIG_SCSI_MULTI_LUN is not set
++# CONFIG_SCSI_CONSTANTS is not set
++# CONFIG_SCSI_LOGGING is not set
++# CONFIG_SCSI_SCAN_ASYNC is not set
++
++#
++# SCSI Transports
++#
++# CONFIG_SCSI_SPI_ATTRS is not set
++# CONFIG_SCSI_FC_ATTRS is not set
++# CONFIG_SCSI_ISCSI_ATTRS is not set
++# CONFIG_SCSI_SAS_ATTRS is not set
++# CONFIG_SCSI_SAS_LIBSAS is not set
++
++#
++# SCSI low-level drivers
++#
++# CONFIG_ISCSI_TCP is not set
++# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
++# CONFIG_SCSI_3W_9XXX is not set
++# CONFIG_SCSI_ACARD is not set
++# CONFIG_SCSI_AACRAID is not set
++# CONFIG_SCSI_AIC7XXX is not set
++# CONFIG_SCSI_AIC7XXX_OLD is not set
++# CONFIG_SCSI_AIC79XX is not set
++# CONFIG_SCSI_AIC94XX is not set
++# CONFIG_SCSI_DPT_I2O is not set
++# CONFIG_SCSI_ARCMSR is not set
++# CONFIG_MEGARAID_NEWGEN is not set
++# CONFIG_MEGARAID_LEGACY is not set
++# CONFIG_MEGARAID_SAS is not set
++# CONFIG_SCSI_HPTIOP is not set
++# CONFIG_SCSI_DMX3191D is not set
++# CONFIG_SCSI_FUTURE_DOMAIN is not set
++# CONFIG_SCSI_IPS is not set
++# CONFIG_SCSI_INITIO is not set
++# CONFIG_SCSI_INIA100 is not set
++# CONFIG_SCSI_STEX is not set
++# CONFIG_SCSI_SYM53C8XX_2 is not set
++# CONFIG_SCSI_QLOGIC_1280 is not set
++# CONFIG_SCSI_QLA_FC is not set
++# CONFIG_SCSI_QLA_ISCSI is not set
++# CONFIG_SCSI_LPFC is not set
++# CONFIG_SCSI_DC395x is not set
++# CONFIG_SCSI_DC390T is not set
++# CONFIG_SCSI_NSP32 is not set
++# CONFIG_SCSI_DEBUG is not set
++# CONFIG_SCSI_SRP is not set
++
++#
++# PCMCIA SCSI adapter support
++#
++# CONFIG_PCMCIA_AHA152X is not set
++# CONFIG_PCMCIA_FDOMAIN is not set
++# CONFIG_PCMCIA_NINJA_SCSI is not set
++# CONFIG_PCMCIA_QLOGIC is not set
++# CONFIG_PCMCIA_SYM53C500 is not set
++
++#
++# Serial ATA (prod) and Parallel ATA (experimental) drivers
++#
++# CONFIG_ATA is not set
++
++#
++# Multi-device support (RAID and LVM)
++#
++# CONFIG_MD is not set
++
++#
++# Fusion MPT device support
++#
++# CONFIG_FUSION is not set
++# CONFIG_FUSION_SPI is not set
++# CONFIG_FUSION_FC is not set
++# CONFIG_FUSION_SAS is not set
++
++#
++# IEEE 1394 (FireWire) support
++#
++# CONFIG_IEEE1394 is not set
++
++#
++# I2O device support
++#
++# CONFIG_I2O is not set
++
++#
++# Network device support
++#
++CONFIG_NETDEVICES=y
++# CONFIG_DUMMY is not set
++# CONFIG_BONDING is not set
++# CONFIG_EQUALIZER is not set
++# CONFIG_TUN is not set
++
++#
++# ARCnet devices
++#
++# CONFIG_ARCNET is not set
++
++#
++# PHY device support
++#
++# CONFIG_PHYLIB is not set
++
++#
++# Ethernet (10 or 100Mbit)
++#
++CONFIG_NET_ETHERNET=y
++CONFIG_MII=y
++# CONFIG_HAPPYMEAL is not set
++# CONFIG_SUNGEM is not set
++# CONFIG_CASSINI is not set
++# CONFIG_NET_VENDOR_3COM is not set
++# CONFIG_SMC91X is not set
++CONFIG_DM9000=y
++CONFIG_DM9000_NOEPROM=y
++# CONFIG_SMC911X is not set
++
++#
++# Tulip family network device support
++#
++# CONFIG_NET_TULIP is not set
++# CONFIG_HP100 is not set
++CONFIG_NET_PCI=y
++# CONFIG_PCNET32 is not set
++# CONFIG_AMD8111_ETH is not set
++# CONFIG_ADAPTEC_STARFIRE is not set
++# CONFIG_B44 is not set
++# CONFIG_FORCEDETH is not set
++# CONFIG_DGRS is not set
++# CONFIG_EEPRO100 is not set
++# CONFIG_E100 is not set
++# CONFIG_FEALNX is not set
++# CONFIG_NATSEMI is not set
++# CONFIG_NE2K_PCI is not set
++# CONFIG_8139CP is not set
++CONFIG_8139TOO=m
++# CONFIG_8139TOO_PIO is not set
++# CONFIG_8139TOO_TUNE_TWISTER is not set
++# CONFIG_8139TOO_8129 is not set
++# CONFIG_8139_OLD_RX_RESET is not set
++# CONFIG_SIS900 is not set
++# CONFIG_EPIC100 is not set
++# CONFIG_SUNDANCE is not set
++# CONFIG_TLAN is not set
++# CONFIG_VIA_RHINE is not set
++# CONFIG_SC92031 is not set
++
++#
++# Ethernet (1000 Mbit)
++#
++# CONFIG_ACENIC is not set
++# CONFIG_DL2K is not set
++# CONFIG_E1000 is not set
++# CONFIG_NS83820 is not set
++# CONFIG_HAMACHI is not set
++# CONFIG_YELLOWFIN is not set
++# CONFIG_R8169 is not set
++# CONFIG_SIS190 is not set
++# CONFIG_SKGE is not set
++# CONFIG_SKY2 is not set
++# CONFIG_SK98LIN is not set
++# CONFIG_VIA_VELOCITY is not set
++# CONFIG_TIGON3 is not set
++# CONFIG_BNX2 is not set
++# CONFIG_QLA3XXX is not set
++# CONFIG_ATL1 is not set
++
++#
++# Ethernet (10000 Mbit)
++#
++# CONFIG_CHELSIO_T1 is not set
++# CONFIG_CHELSIO_T3 is not set
++# CONFIG_IXGB is not set
++# CONFIG_S2IO is not set
++# CONFIG_MYRI10GE is not set
++# CONFIG_NETXEN_NIC is not set
++
++#
++# Token Ring devices
++#
++# CONFIG_TR is not set
++
++#
++# Wireless LAN (non-hamradio)
++#
++CONFIG_NET_RADIO=y
++# CONFIG_NET_WIRELESS_RTNETLINK is not set
++
++#
++# Obsolete Wireless cards support (pre-802.11)
++#
++# CONFIG_STRIP is not set
++# CONFIG_PCMCIA_WAVELAN is not set
++# CONFIG_PCMCIA_NETWAVE is not set
++
++#
++# Wireless 802.11 Frequency Hopping cards support
++#
++# CONFIG_PCMCIA_RAYCS is not set
++
++#
++# Wireless 802.11b ISA/PCI cards support
++#
++# CONFIG_IPW2100 is not set
++# CONFIG_IPW2200 is not set
++# CONFIG_HERMES is not set
++# CONFIG_ATMEL is not set
++
++#
++# Wireless 802.11b Pcmcia/Cardbus cards support
++#
++# CONFIG_AIRO_CS is not set
++# CONFIG_PCMCIA_WL3501 is not set
++
++#
++# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
++#
++# CONFIG_PRISM54 is not set
++# CONFIG_USB_ZD1201 is not set
++# CONFIG_HOSTAP is not set
++CONFIG_NET_WIRELESS=y
++
++#
++# PCMCIA network device support
++#
++CONFIG_NET_PCMCIA=y
++# CONFIG_PCMCIA_3C589 is not set
++# CONFIG_PCMCIA_3C574 is not set
++# CONFIG_PCMCIA_FMVJ18X is not set
++CONFIG_PCMCIA_PCNET=m
++# CONFIG_PCMCIA_NMCLAN is not set
++# CONFIG_PCMCIA_SMC91C92 is not set
++# CONFIG_PCMCIA_XIRC2PS is not set
++# CONFIG_PCMCIA_AXNET is not set
++
++#
++# Wan interfaces
++#
++# CONFIG_WAN is not set
++# CONFIG_FDDI is not set
++# CONFIG_HIPPI is not set
++# CONFIG_PPP is not set
++# CONFIG_SLIP is not set
++# CONFIG_NET_FC is not set
++# CONFIG_SHAPER is not set
++# CONFIG_NETCONSOLE is not set
++# CONFIG_NETPOLL is not set
++# CONFIG_NET_POLL_CONTROLLER is not set
++
++#
++# ISDN subsystem
++#
++# CONFIG_ISDN is not set
++
++#
++# Input device support
++#
++CONFIG_INPUT=y
++# CONFIG_INPUT_FF_MEMLESS is not set
++
++#
++# Userland interfaces
++#
++# CONFIG_INPUT_MOUSEDEV is not set
++# CONFIG_INPUT_JOYDEV is not set
++# CONFIG_INPUT_TSDEV is not set
++CONFIG_INPUT_EVDEV=y
++# CONFIG_INPUT_EVBUG is not set
++
++#
++# Input Device Drivers
++#
++# CONFIG_INPUT_KEYBOARD is not set
++# CONFIG_INPUT_MOUSE is not set
++# CONFIG_INPUT_JOYSTICK is not set
++CONFIG_INPUT_TOUCHSCREEN=y
++# CONFIG_TOUCHSCREEN_GUNZE is not set
++# CONFIG_TOUCHSCREEN_ELO is not set
++# CONFIG_TOUCHSCREEN_MTOUCH is not set
++# CONFIG_TOUCHSCREEN_MK712 is not set
++# CONFIG_TOUCHSCREEN_PENMOUNT is not set
++# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
++# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
++CONFIG_TOUCHSCREEN_UCB1400=m
++# CONFIG_INPUT_MISC is not set
++
++#
++# Hardware I/O ports
++#
++# CONFIG_SERIO is not set
++# CONFIG_GAMEPORT is not set
++
++#
++# Character devices
++#
++CONFIG_VT=y
++CONFIG_VT_CONSOLE=y
++CONFIG_HW_CONSOLE=y
++# CONFIG_VT_HW_CONSOLE_BINDING is not set
++# CONFIG_SERIAL_NONSTANDARD is not set
++
++#
++# Serial drivers
++#
++# CONFIG_SERIAL_8250 is not set
++
++#
++# Non-8250 serial port support
++#
++CONFIG_SERIAL_PXA=y
++CONFIG_SERIAL_PXA_CONSOLE=y
++CONFIG_SERIAL_CORE=y
++CONFIG_SERIAL_CORE_CONSOLE=y
++# CONFIG_SERIAL_JSM is not set
++CONFIG_UNIX98_PTYS=y
++CONFIG_LEGACY_PTYS=y
++CONFIG_LEGACY_PTY_COUNT=256
++
++#
++# IPMI
++#
++# CONFIG_IPMI_HANDLER is not set
++
++#
++# Watchdog Cards
++#
++# CONFIG_WATCHDOG is not set
++CONFIG_HW_RANDOM=m
++# CONFIG_NVRAM is not set
++# CONFIG_DTLK is not set
++# CONFIG_R3964 is not set
++# CONFIG_APPLICOM is not set
++# CONFIG_DRM is not set
++
++#
++# PCMCIA character devices
++#
++# CONFIG_SYNCLINK_CS is not set
++# CONFIG_CARDMAN_4000 is not set
++# CONFIG_CARDMAN_4040 is not set
++# CONFIG_RAW_DRIVER is not set
++
++#
++# TPM devices
++#
++# CONFIG_TCG_TPM is not set
++
++#
++# I2C support
++#
++# CONFIG_I2C is not set
++
++#
++# SPI support
++#
++# CONFIG_SPI is not set
++# CONFIG_SPI_MASTER is not set
++
++#
++# Dallas's 1-wire bus
++#
++# CONFIG_W1 is not set
++
++#
++# Hardware Monitoring support
++#
++# CONFIG_HWMON is not set
++# CONFIG_HWMON_VID is not set
++
++#
++# Misc devices
++#
++# CONFIG_SGI_IOC4 is not set
++# CONFIG_TIFM_CORE is not set
++
++#
++# Multifunction device drivers
++#
++# CONFIG_MFD_SM501 is not set
++
++#
++# LED devices
++#
++CONFIG_NEW_LEDS=y
++CONFIG_LEDS_CLASS=y
++
++#
++# LED drivers
++#
++CONFIG_LEDS_CM_X270=y
++
++#
++# LED Triggers
++#
++CONFIG_LEDS_TRIGGERS=y
++# CONFIG_LEDS_TRIGGER_TIMER is not set
++# CONFIG_LEDS_TRIGGER_IDE_DISK is not set
++CONFIG_LEDS_TRIGGER_HEARTBEAT=y
++
++#
++# Multimedia devices
++#
++# CONFIG_VIDEO_DEV is not set
++
++#
++# Digital Video Broadcasting Devices
++#
++# CONFIG_DVB is not set
++# CONFIG_USB_DABUSB is not set
++
++#
++# Graphics support
++#
++# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
++CONFIG_FB=y
++# CONFIG_FIRMWARE_EDID is not set
++# CONFIG_FB_DDC is not set
++CONFIG_FB_CFB_FILLRECT=y
++CONFIG_FB_CFB_COPYAREA=y
++CONFIG_FB_CFB_IMAGEBLIT=y
++# CONFIG_FB_SVGALIB is not set
++# CONFIG_FB_MACMODES is not set
++# CONFIG_FB_BACKLIGHT is not set
++# CONFIG_FB_MODE_HELPERS is not set
++# CONFIG_FB_TILEBLITTING is not set
++
++#
++# Frambuffer hardware drivers
++#
++# CONFIG_FB_CIRRUS is not set
++# CONFIG_FB_PM2 is not set
++# CONFIG_FB_CYBER2000 is not set
++# CONFIG_FB_ASILIANT is not set
++# CONFIG_FB_IMSTT is not set
++# CONFIG_FB_S1D13XXX is not set
++# CONFIG_FB_NVIDIA is not set
++# CONFIG_FB_RIVA is not set
++# CONFIG_FB_MATROX is not set
++# CONFIG_FB_RADEON is not set
++# CONFIG_FB_ATY128 is not set
++# CONFIG_FB_ATY is not set
++# CONFIG_FB_S3 is not set
++# CONFIG_FB_SAVAGE is not set
++# CONFIG_FB_SIS is not set
++# CONFIG_FB_NEOMAGIC is not set
++# CONFIG_FB_KYRO is not set
++# CONFIG_FB_3DFX is not set
++# CONFIG_FB_VOODOO1 is not set
++# CONFIG_FB_TRIDENT is not set
++CONFIG_FB_PXA=y
++# CONFIG_FB_PXA_PARAMETERS is not set
++CONFIG_FB_MBX=m
++# CONFIG_FB_VIRTUAL is not set
++
++#
++# Console display driver support
++#
++# CONFIG_VGA_CONSOLE is not set
++CONFIG_DUMMY_CONSOLE=y
++CONFIG_FRAMEBUFFER_CONSOLE=y
++# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
++# CONFIG_FONTS is not set
++CONFIG_FONT_8x8=y
++CONFIG_FONT_8x16=y
++
++#
++# Logo configuration
++#
++CONFIG_LOGO=y
++CONFIG_LOGO_LINUX_MONO=y
++CONFIG_LOGO_LINUX_VGA16=y
++CONFIG_LOGO_LINUX_CLUT224=y
++
++#
++# Sound
++#
++CONFIG_SOUND=m
++
++#
++# Advanced Linux Sound Architecture
++#
++CONFIG_SND=m
++CONFIG_SND_TIMER=m
++CONFIG_SND_PCM=m
++# CONFIG_SND_SEQUENCER is not set
++CONFIG_SND_OSSEMUL=y
++CONFIG_SND_MIXER_OSS=m
++CONFIG_SND_PCM_OSS=m
++CONFIG_SND_PCM_OSS_PLUGINS=y
++# CONFIG_SND_DYNAMIC_MINORS is not set
++CONFIG_SND_SUPPORT_OLD_API=y
++CONFIG_SND_VERBOSE_PROCFS=y
++# CONFIG_SND_VERBOSE_PRINTK is not set
++# CONFIG_SND_DEBUG is not set
++
++#
++# Generic devices
++#
++CONFIG_SND_AC97_CODEC=m
++# CONFIG_SND_DUMMY is not set
++# CONFIG_SND_MTPAV is not set
++# CONFIG_SND_SERIAL_U16550 is not set
++# CONFIG_SND_MPU401 is not set
++
++#
++# PCI devices
++#
++# CONFIG_SND_AD1889 is not set
++# CONFIG_SND_ALS300 is not set
++# CONFIG_SND_ALI5451 is not set
++# CONFIG_SND_ATIIXP is not set
++# CONFIG_SND_ATIIXP_MODEM is not set
++# CONFIG_SND_AU8810 is not set
++# CONFIG_SND_AU8820 is not set
++# CONFIG_SND_AU8830 is not set
++# CONFIG_SND_AZT3328 is not set
++# CONFIG_SND_BT87X is not set
++# CONFIG_SND_CA0106 is not set
++# CONFIG_SND_CMIPCI is not set
++# CONFIG_SND_CS4281 is not set
++# CONFIG_SND_CS46XX is not set
++# CONFIG_SND_DARLA20 is not set
++# CONFIG_SND_GINA20 is not set
++# CONFIG_SND_LAYLA20 is not set
++# CONFIG_SND_DARLA24 is not set
++# CONFIG_SND_GINA24 is not set
++# CONFIG_SND_LAYLA24 is not set
++# CONFIG_SND_MONA is not set
++# CONFIG_SND_MIA is not set
++# CONFIG_SND_ECHO3G is not set
++# CONFIG_SND_INDIGO is not set
++# CONFIG_SND_INDIGOIO is not set
++# CONFIG_SND_INDIGODJ is not set
++# CONFIG_SND_EMU10K1 is not set
++# CONFIG_SND_EMU10K1X is not set
++# CONFIG_SND_ENS1370 is not set
++# CONFIG_SND_ENS1371 is not set
++# CONFIG_SND_ES1938 is not set
++# CONFIG_SND_ES1968 is not set
++# CONFIG_SND_FM801 is not set
++# CONFIG_SND_HDA_INTEL is not set
++# CONFIG_SND_HDSP is not set
++# CONFIG_SND_HDSPM is not set
++# CONFIG_SND_ICE1712 is not set
++# CONFIG_SND_ICE1724 is not set
++# CONFIG_SND_INTEL8X0 is not set
++# CONFIG_SND_INTEL8X0M is not set
++# CONFIG_SND_KORG1212 is not set
++# CONFIG_SND_MAESTRO3 is not set
++# CONFIG_SND_MIXART is not set
++# CONFIG_SND_NM256 is not set
++# CONFIG_SND_PCXHR is not set
++# CONFIG_SND_RIPTIDE is not set
++# CONFIG_SND_RME32 is not set
++# CONFIG_SND_RME96 is not set
++# CONFIG_SND_RME9652 is not set
++# CONFIG_SND_SONICVIBES is not set
++# CONFIG_SND_TRIDENT is not set
++# CONFIG_SND_VIA82XX is not set
++# CONFIG_SND_VIA82XX_MODEM is not set
++# CONFIG_SND_VX222 is not set
++# CONFIG_SND_YMFPCI is not set
++# CONFIG_SND_AC97_POWER_SAVE is not set
++
++#
++# ALSA ARM devices
++#
++CONFIG_SND_PXA2XX_PCM=m
++CONFIG_SND_PXA2XX_AC97=m
++
++#
++# USB devices
++#
++# CONFIG_SND_USB_AUDIO is not set
++
++#
++# PCMCIA devices
++#
++# CONFIG_SND_VXPOCKET is not set
++# CONFIG_SND_PDAUDIOCF is not set
++
++#
++# SoC audio support
++#
++# CONFIG_SND_SOC is not set
++
++#
++# Open Sound System
++#
++# CONFIG_SOUND_PRIME is not set
++CONFIG_AC97_BUS=m
++
++#
++# HID Devices
++#
++CONFIG_HID=y
++# CONFIG_HID_DEBUG is not set
++
++#
++# USB support
++#
++CONFIG_USB_ARCH_HAS_HCD=y
++CONFIG_USB_ARCH_HAS_OHCI=y
++CONFIG_USB_ARCH_HAS_EHCI=y
++CONFIG_USB=y
++# CONFIG_USB_DEBUG is not set
++
++#
++# Miscellaneous USB options
++#
++CONFIG_USB_DEVICEFS=y
++# CONFIG_USB_DYNAMIC_MINORS is not set
++# CONFIG_USB_SUSPEND is not set
++# CONFIG_USB_OTG is not set
++
++#
++# USB Host Controller Drivers
++#
++# CONFIG_USB_EHCI_HCD is not set
++# CONFIG_USB_ISP116X_HCD is not set
++CONFIG_USB_OHCI_HCD=y
++# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
++# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
++CONFIG_USB_OHCI_LITTLE_ENDIAN=y
++# CONFIG_USB_UHCI_HCD is not set
++# CONFIG_USB_SL811_HCD is not set
++
++#
++# USB Device Class drivers
++#
++# CONFIG_USB_ACM is not set
++# CONFIG_USB_PRINTER is not set
++
++#
++# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
++#
++
++#
++# may also be needed; see USB_STORAGE Help for more information
++#
++CONFIG_USB_STORAGE=y
++# CONFIG_USB_STORAGE_DEBUG is not set
++# CONFIG_USB_STORAGE_DATAFAB is not set
++# CONFIG_USB_STORAGE_FREECOM is not set
++# CONFIG_USB_STORAGE_DPCM is not set
++# CONFIG_USB_STORAGE_USBAT is not set
++# CONFIG_USB_STORAGE_SDDR09 is not set
++# CONFIG_USB_STORAGE_SDDR55 is not set
++# CONFIG_USB_STORAGE_JUMPSHOT is not set
++# CONFIG_USB_STORAGE_ALAUDA is not set
++# CONFIG_USB_STORAGE_KARMA is not set
++# CONFIG_USB_LIBUSUAL is not set
++
++#
++# USB Input Devices
++#
++CONFIG_USB_HID=y
++# CONFIG_USB_HIDINPUT_POWERBOOK is not set
++# CONFIG_HID_FF is not set
++# CONFIG_USB_HIDDEV is not set
++# CONFIG_USB_AIPTEK is not set
++# CONFIG_USB_WACOM is not set
++# CONFIG_USB_ACECAD is not set
++# CONFIG_USB_KBTAB is not set
++# CONFIG_USB_POWERMATE is not set
++# CONFIG_USB_TOUCHSCREEN is not set
++# CONFIG_USB_YEALINK is not set
++# CONFIG_USB_XPAD is not set
++# CONFIG_USB_ATI_REMOTE is not set
++# CONFIG_USB_ATI_REMOTE2 is not set
++# CONFIG_USB_KEYSPAN_REMOTE is not set
++# CONFIG_USB_APPLETOUCH is not set
++# CONFIG_USB_GTCO is not set
++
++#
++# USB Imaging devices
++#
++# CONFIG_USB_MDC800 is not set
++# CONFIG_USB_MICROTEK is not set
++
++#
++# USB Network Adapters
++#
++# CONFIG_USB_CATC is not set
++# CONFIG_USB_KAWETH is not set
++# CONFIG_USB_PEGASUS is not set
++# CONFIG_USB_RTL8150 is not set
++# CONFIG_USB_USBNET_MII is not set
++# CONFIG_USB_USBNET is not set
++CONFIG_USB_MON=y
++
++#
++# USB port drivers
++#
++
++#
++# USB Serial Converter support
++#
++# CONFIG_USB_SERIAL is not set
++
++#
++# USB Miscellaneous drivers
++#
++# CONFIG_USB_EMI62 is not set
++# CONFIG_USB_EMI26 is not set
++# CONFIG_USB_ADUTUX is not set
++# CONFIG_USB_AUERSWALD is not set
++# CONFIG_USB_RIO500 is not set
++# CONFIG_USB_LEGOTOWER is not set
++# CONFIG_USB_LCD is not set
++# CONFIG_USB_BERRY_CHARGE is not set
++# CONFIG_USB_LED is not set
++# CONFIG_USB_CYPRESS_CY7C63 is not set
++# CONFIG_USB_CYTHERM is not set
++# CONFIG_USB_PHIDGET is not set
++# CONFIG_USB_IDMOUSE is not set
++# CONFIG_USB_FTDI_ELAN is not set
++# CONFIG_USB_APPLEDISPLAY is not set
++# CONFIG_USB_LD is not set
++# CONFIG_USB_TRANCEVIBRATOR is not set
++# CONFIG_USB_IOWARRIOR is not set
++# CONFIG_USB_TEST is not set
++
++#
++# USB DSL modem support
++#
++
++#
++# USB Gadget Support
++#
++# CONFIG_USB_GADGET is not set
++
++#
++# MMC/SD Card support
++#
++CONFIG_MMC=m
++# CONFIG_MMC_DEBUG is not set
++CONFIG_MMC_BLOCK=m
++CONFIG_MMC_PXA=m
++# CONFIG_MMC_SDHCI is not set
++# CONFIG_MMC_TIFM_SD is not set
++
++#
++# Real Time Clock
++#
++CONFIG_RTC_LIB=y
++CONFIG_RTC_CLASS=y
++CONFIG_RTC_HCTOSYS=y
++CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
++# CONFIG_RTC_DEBUG is not set
++
++#
++# RTC interfaces
++#
++CONFIG_RTC_INTF_SYSFS=y
++CONFIG_RTC_INTF_PROC=y
++CONFIG_RTC_INTF_DEV=y
++# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
++
++#
++# RTC drivers
++#
++# CONFIG_RTC_DRV_CMOS is not set
++# CONFIG_RTC_DRV_DS1553 is not set
++# CONFIG_RTC_DRV_DS1742 is not set
++# CONFIG_RTC_DRV_M48T86 is not set
++CONFIG_RTC_DRV_SA1100=y
++# CONFIG_RTC_DRV_TEST is not set
++CONFIG_RTC_DRV_V3020=y
++
++#
++# File systems
++#
++CONFIG_EXT2_FS=y
++# CONFIG_EXT2_FS_XATTR is not set
++# CONFIG_EXT2_FS_XIP is not set
++CONFIG_EXT3_FS=y
++CONFIG_EXT3_FS_XATTR=y
++# CONFIG_EXT3_FS_POSIX_ACL is not set
++# CONFIG_EXT3_FS_SECURITY is not set
++# CONFIG_EXT4DEV_FS is not set
++CONFIG_JBD=y
++# CONFIG_JBD_DEBUG is not set
++CONFIG_FS_MBCACHE=y
++# CONFIG_REISERFS_FS is not set
++# CONFIG_JFS_FS is not set
++# CONFIG_FS_POSIX_ACL is not set
++# CONFIG_XFS_FS is not set
++# CONFIG_GFS2_FS is not set
++# CONFIG_OCFS2_FS is not set
++# CONFIG_MINIX_FS is not set
++# CONFIG_ROMFS_FS is not set
++CONFIG_INOTIFY=y
++CONFIG_INOTIFY_USER=y
++# CONFIG_QUOTA is not set
++CONFIG_DNOTIFY=y
++# CONFIG_AUTOFS_FS is not set
++# CONFIG_AUTOFS4_FS is not set
++# CONFIG_FUSE_FS is not set
++
++#
++# CD-ROM/DVD Filesystems
++#
++# CONFIG_ISO9660_FS is not set
++# CONFIG_UDF_FS is not set
++
++#
++# DOS/FAT/NT Filesystems
++#
++CONFIG_FAT_FS=y
++CONFIG_MSDOS_FS=y
++CONFIG_VFAT_FS=y
++CONFIG_FAT_DEFAULT_CODEPAGE=437
++CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
++# CONFIG_NTFS_FS is not set
++
++#
++# Pseudo filesystems
++#
++CONFIG_PROC_FS=y
++CONFIG_PROC_SYSCTL=y
++CONFIG_SYSFS=y
++CONFIG_TMPFS=y
++# CONFIG_TMPFS_POSIX_ACL is not set
++# CONFIG_HUGETLB_PAGE is not set
++CONFIG_RAMFS=y
++# CONFIG_CONFIGFS_FS is not set
++
++#
++# Miscellaneous filesystems
++#
++# CONFIG_ADFS_FS is not set
++# CONFIG_AFFS_FS is not set
++# CONFIG_HFS_FS is not set
++# CONFIG_HFSPLUS_FS is not set
++# CONFIG_BEFS_FS is not set
++# CONFIG_BFS_FS is not set
++# CONFIG_EFS_FS is not set
++# CONFIG_JFFS2_FS is not set
++# CONFIG_CRAMFS is not set
++# CONFIG_VXFS_FS is not set
++# CONFIG_HPFS_FS is not set
++# CONFIG_QNX4FS_FS is not set
++# CONFIG_SYSV_FS is not set
++# CONFIG_UFS_FS is not set
++
++#
++# Network File Systems
++#
++CONFIG_NFS_FS=y
++CONFIG_NFS_V3=y
++# CONFIG_NFS_V3_ACL is not set
++# CONFIG_NFS_V4 is not set
++# CONFIG_NFS_DIRECTIO is not set
++# CONFIG_NFSD is not set
++CONFIG_ROOT_NFS=y
++CONFIG_LOCKD=y
++CONFIG_LOCKD_V4=y
++CONFIG_NFS_COMMON=y
++CONFIG_SUNRPC=y
++# CONFIG_RPCSEC_GSS_KRB5 is not set
++# CONFIG_RPCSEC_GSS_SPKM3 is not set
++CONFIG_SMB_FS=y
++# CONFIG_SMB_NLS_DEFAULT is not set
++# CONFIG_CIFS is not set
++# CONFIG_NCP_FS is not set
++# CONFIG_CODA_FS is not set
++# CONFIG_AFS_FS is not set
++# CONFIG_9P_FS is not set
++
++#
++# Partition Types
++#
++# CONFIG_PARTITION_ADVANCED is not set
++CONFIG_MSDOS_PARTITION=y
++
++#
++# Native Language Support
++#
++CONFIG_NLS=y
++CONFIG_NLS_DEFAULT="iso8859-1"
++CONFIG_NLS_CODEPAGE_437=y
++# CONFIG_NLS_CODEPAGE_737 is not set
++# CONFIG_NLS_CODEPAGE_775 is not set
++# CONFIG_NLS_CODEPAGE_850 is not set
++# CONFIG_NLS_CODEPAGE_852 is not set
++# CONFIG_NLS_CODEPAGE_855 is not set
++# CONFIG_NLS_CODEPAGE_857 is not set
++# CONFIG_NLS_CODEPAGE_860 is not set
++# CONFIG_NLS_CODEPAGE_861 is not set
++# CONFIG_NLS_CODEPAGE_862 is not set
++# CONFIG_NLS_CODEPAGE_863 is not set
++# CONFIG_NLS_CODEPAGE_864 is not set
++# CONFIG_NLS_CODEPAGE_865 is not set
++# CONFIG_NLS_CODEPAGE_866 is not set
++# CONFIG_NLS_CODEPAGE_869 is not set
++# CONFIG_NLS_CODEPAGE_936 is not set
++# CONFIG_NLS_CODEPAGE_950 is not set
++# CONFIG_NLS_CODEPAGE_932 is not set
++# CONFIG_NLS_CODEPAGE_949 is not set
++# CONFIG_NLS_CODEPAGE_874 is not set
++# CONFIG_NLS_ISO8859_8 is not set
++# CONFIG_NLS_CODEPAGE_1250 is not set
++# CONFIG_NLS_CODEPAGE_1251 is not set
++# CONFIG_NLS_ASCII is not set
++CONFIG_NLS_ISO8859_1=y
++# CONFIG_NLS_ISO8859_2 is not set
++# CONFIG_NLS_ISO8859_3 is not set
++# CONFIG_NLS_ISO8859_4 is not set
++# CONFIG_NLS_ISO8859_5 is not set
++# CONFIG_NLS_ISO8859_6 is not set
++# CONFIG_NLS_ISO8859_7 is not set
++# CONFIG_NLS_ISO8859_9 is not set
++# CONFIG_NLS_ISO8859_13 is not set
++# CONFIG_NLS_ISO8859_14 is not set
++# CONFIG_NLS_ISO8859_15 is not set
++# CONFIG_NLS_KOI8_R is not set
++# CONFIG_NLS_KOI8_U is not set
++# CONFIG_NLS_UTF8 is not set
++
++#
++# Distributed Lock Manager
++#
++# CONFIG_DLM is not set
++
++#
++# Profiling support
++#
++# CONFIG_PROFILING is not set
++
++#
++# Kernel hacking
++#
++# CONFIG_PRINTK_TIME is not set
++CONFIG_ENABLE_MUST_CHECK=y
++CONFIG_MAGIC_SYSRQ=y
++# CONFIG_UNUSED_SYMBOLS is not set
++# CONFIG_DEBUG_FS is not set
++# CONFIG_HEADERS_CHECK is not set
++CONFIG_DEBUG_KERNEL=y
++# CONFIG_DEBUG_SHIRQ is not set
++CONFIG_LOG_BUF_SHIFT=17
++# CONFIG_DETECT_SOFTLOCKUP is not set
++# CONFIG_SCHEDSTATS is not set
++# CONFIG_TIMER_STATS is not set
++# CONFIG_DEBUG_SLAB is not set
++# CONFIG_DEBUG_RT_MUTEXES is not set
++# CONFIG_RT_MUTEX_TESTER is not set
++# CONFIG_DEBUG_SPINLOCK is not set
++# CONFIG_DEBUG_MUTEXES is not set
++# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
++# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
++# CONFIG_DEBUG_KOBJECT is not set
++# CONFIG_DEBUG_BUGVERBOSE is not set
++CONFIG_DEBUG_INFO=y
++# CONFIG_DEBUG_VM is not set
++# CONFIG_DEBUG_LIST is not set
++CONFIG_FRAME_POINTER=y
++CONFIG_FORCED_INLINING=y
++# CONFIG_RCU_TORTURE_TEST is not set
++# CONFIG_FAULT_INJECTION is not set
++CONFIG_DEBUG_USER=y
++CONFIG_DEBUG_ERRORS=y
++CONFIG_DEBUG_LL=y
++# CONFIG_DEBUG_ICEDCC is not set
++
++#
++# Security options
++#
++# CONFIG_KEYS is not set
++# CONFIG_SECURITY is not set
++
++#
++# Cryptographic options
++#
++CONFIG_CRYPTO=y
++CONFIG_CRYPTO_ALGAPI=m
++CONFIG_CRYPTO_BLKCIPHER=m
++CONFIG_CRYPTO_MANAGER=m
++# CONFIG_CRYPTO_HMAC is not set
++# CONFIG_CRYPTO_XCBC is not set
++# CONFIG_CRYPTO_NULL is not set
++# CONFIG_CRYPTO_MD4 is not set
++# CONFIG_CRYPTO_MD5 is not set
++# CONFIG_CRYPTO_SHA1 is not set
++# CONFIG_CRYPTO_SHA256 is not set
++# CONFIG_CRYPTO_SHA512 is not set
++# CONFIG_CRYPTO_WP512 is not set
++# CONFIG_CRYPTO_TGR192 is not set
++# CONFIG_CRYPTO_GF128MUL is not set
++CONFIG_CRYPTO_ECB=m
++CONFIG_CRYPTO_CBC=m
++CONFIG_CRYPTO_PCBC=m
++# CONFIG_CRYPTO_LRW is not set
++# CONFIG_CRYPTO_DES is not set
++# CONFIG_CRYPTO_FCRYPT is not set
++# CONFIG_CRYPTO_BLOWFISH is not set
++# CONFIG_CRYPTO_TWOFISH is not set
++# CONFIG_CRYPTO_SERPENT is not set
++CONFIG_CRYPTO_AES=m
++# CONFIG_CRYPTO_CAST5 is not set
++# CONFIG_CRYPTO_CAST6 is not set
++# CONFIG_CRYPTO_TEA is not set
++CONFIG_CRYPTO_ARC4=m
++# CONFIG_CRYPTO_KHAZAD is not set
++# CONFIG_CRYPTO_ANUBIS is not set
++# CONFIG_CRYPTO_DEFLATE is not set
++# CONFIG_CRYPTO_MICHAEL_MIC is not set
++# CONFIG_CRYPTO_CRC32C is not set
++# CONFIG_CRYPTO_CAMELLIA is not set
++# CONFIG_CRYPTO_TEST is not set
++
++#
++# Hardware crypto devices
++#
++
++#
++# Library routines
++#
++CONFIG_BITREVERSE=y
++# CONFIG_CRC_CCITT is not set
++# CONFIG_CRC16 is not set
++CONFIG_CRC32=y
++# CONFIG_LIBCRC32C is not set
++CONFIG_PLIST=y
++CONFIG_HAS_IOMEM=y
++CONFIG_HAS_IOPORT=y
+diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
+index 5c0a100..e1cd439 100644
+--- a/arch/arm/mach-pxa/Kconfig
++++ b/arch/arm/mach-pxa/Kconfig
+@@ -37,6 +37,11 @@ config MACH_TRIZEPS4
+ bool "Keith und Koep Trizeps4 DIMM-Module"
+ select PXA27x
+
++config MACH_ARMCORE
++ bool "CompuLab CM-X270 modules"
++ select PXA27x
++ select IWMMXT
++
+ endchoice
+
+ if PXA_SHARPSL
+diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
+index 9093eb1..2a110f8 100644
+--- a/arch/arm/mach-pxa/Makefile
++++ b/arch/arm/mach-pxa/Makefile
+@@ -18,6 +18,7 @@ obj-$(CONFIG_PXA_SHARP_Cxx00) += spitz.o corgi_ssp.o corgi_lcd.o sharpsl_pm.o sp
+ obj-$(CONFIG_MACH_AKITA) += akita-ioexp.o
+ obj-$(CONFIG_MACH_POODLE) += poodle.o corgi_ssp.o
+ obj-$(CONFIG_MACH_TOSA) += tosa.o
++obj-$(CONFIG_MACH_ARMCORE) += cm-x270.o
+
+ # Support for blinky lights
+ led-y := leds.o
+@@ -25,6 +26,8 @@ led-$(CONFIG_ARCH_LUBBOCK) += leds-lubbock.o
+ led-$(CONFIG_MACH_MAINSTONE) += leds-mainstone.o
+ led-$(CONFIG_ARCH_PXA_IDP) += leds-idp.o
+ led-$(CONFIG_MACH_TRIZEPS4) += leds-trizeps4.o
++# FIXME: use driver/leds instead
++led-$(CONFIG_MACH_ARMCORE) += leds-cm-x270.o
+
+ obj-$(CONFIG_LEDS) += $(led-y)
+
+@@ -35,3 +38,7 @@ obj-$(CONFIG_PXA_SSP) += ssp.o
+ ifeq ($(CONFIG_PXA27x),y)
+ obj-$(CONFIG_PM) += standby.o
+ endif
++
++ifeq ($(CONFIG_PCI),y)
++obj-$(CONFIG_MACH_ARMCORE) += cm-x270-pci.o
++endif
+diff --git a/arch/arm/mach-pxa/cm-x270.c b/arch/arm/mach-pxa/cm-x270.c
+new file mode 100644
+index 0000000..88b080d
+--- /dev/null
++++ b/arch/arm/mach-pxa/cm-x270.c
+@@ -0,0 +1,821 @@
++/*
++ * linux/arch/arm/mach-pxa/cm-x270.c
++ *
++ * Copyright (C) 2007 CompuLab, Ltd.
++ * Mike Rapoport <mike@compulab.co.il>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#include <linux/pm.h>
++#include <linux/fb.h>
++#include <linux/platform_device.h>
++#include <linux/sysdev.h>
++#include <linux/dm9000.h>
++#include <linux/rtc-v3020.h>
++#include <linux/serial_8250.h>
++#include <video/mbxfb.h>
++
++#include <asm/types.h>
++#include <asm/setup.h>
++#include <asm/memory.h>
++#include <asm/mach-types.h>
++#include <asm/hardware.h>
++#include <asm/irq.h>
++#include <asm/io.h>
++#include <asm/delay.h>
++
++#include <asm/mach/arch.h>
++#include <asm/mach/map.h>
++#include <asm/mach/irq.h>
++
++#include <asm/arch/pxa-regs.h>
++#include <asm/arch/pxafb.h>
++#include <asm/arch/ohci.h>
++#include <asm/arch/mmc.h>
++#include <asm/arch/bitfield.h>
++#include <asm/arch/cm-x270.h>
++
++#include <asm/hardware/it8152.h>
++
++#include "generic.h"
++
++#define RTC_PHYS_BASE (PXA_CS1_PHYS + (5 << 22))
++#define DM9000_PHYS_BASE (PXA_CS1_PHYS + (6 << 22))
++
++static struct resource cmx270_dm9k_resource[] = {
++ [0] = {
++ .start = DM9000_PHYS_BASE,
++ .end = DM9000_PHYS_BASE + 4,
++ .flags = IORESOURCE_MEM,
++ },
++ [1] = {
++ .start = DM9000_PHYS_BASE + 8,
++ .end = DM9000_PHYS_BASE + 8 + 500,
++ .flags = IORESOURCE_MEM,
++ },
++ [2] = {
++ .start = CMX270_ETHIRQ,
++ .end = CMX270_ETHIRQ,
++ .flags = IORESOURCE_IRQ,
++ }
++};
++
++/* for the moment we limit ourselves to 32bit IO until some
++ * better IO routines can be written and tested
++ */
++static struct dm9000_plat_data cmx270_dm9k_platdata = {
++ .flags = DM9000_PLATF_32BITONLY,
++};
++
++/* Ethernet device */
++static struct platform_device cmx270_device_dm9k = {
++ .name = "dm9000",
++ .id = 0,
++ .num_resources = ARRAY_SIZE(cmx270_dm9k_resource),
++ .resource = cmx270_dm9k_resource,
++ .dev = {
++ .platform_data = &cmx270_dm9k_platdata,
++ }
++};
++
++/* audio device */
++static struct platform_device cmx270_audio_device = {
++ .name = "pxa2xx-ac97",
++ .id = -1,
++};
++
++/* touchscreen controller */
++static struct platform_device cmx270_ts_device = {
++ .name = "ucb1x00-ts",
++ .id = -1,
++};
++
++/* RTC */
++static struct resource cmx270_v3020_resource[] = {
++ [0] = {
++ .start = RTC_PHYS_BASE,
++ .end = RTC_PHYS_BASE + 4,
++ .flags = IORESOURCE_MEM,
++ },
++};
++
++struct v3020_platform_data cmx270_v3020_pdata = {
++ .leftshift = 16,
++};
++
++static struct platform_device cmx270_rtc_device = {
++ .name = "v3020",
++ .num_resources = ARRAY_SIZE(cmx270_v3020_resource),
++ .resource = cmx270_v3020_resource,
++ .id = -1,
++ .dev = {
++ .platform_data = &cmx270_v3020_pdata,
++ }
++};
++
++/*
++ * CM-X270 LEDs
++ */
++static struct platform_device cmx270led_device = {
++ .name = "cm-x270-led",
++ .id = -1,
++};
++
++/* 2700G graphics */
++static u64 fb_dma_mask = ~(u64)0;
++
++static struct resource cmx270_2700G_resource[] = {
++ /* frame buffer memory including ODFB and External SDRAM */
++ [0] = {
++ .start = MARATHON_PHYS,
++ .end = MARATHON_PHYS + 0x02000000,
++ .flags = IORESOURCE_MEM,
++ },
++ /* Marathon registers */
++ [1] = {
++ .start = MARATHON_PHYS + 0x03fe0000,
++ .end = MARATHON_PHYS + 0x03ffffff,
++ .flags = IORESOURCE_MEM,
++ },
++};
++
++static unsigned long save_lcd_regs[10];
++
++static int cmx270_marathon_probe(struct fb_info *fb)
++{
++ /* save PXA-270 pin settings before enabling 2700G */
++ save_lcd_regs[0] = GPDR1;
++ save_lcd_regs[1] = GPDR2;
++ save_lcd_regs[2] = GAFR1_U;
++ save_lcd_regs[3] = GAFR2_L;
++ save_lcd_regs[4] = GAFR2_U;
++
++ /* Disable PXA-270 on-chip controller driving pins */
++ GPDR1 &= ~(0xfc000000);
++ GPDR2 &= ~(0x00c03fff);
++ GAFR1_U &= ~(0xfff00000);
++ GAFR2_L &= ~(0x0fffffff);
++ GAFR2_U &= ~(0x0000f000);
++ return 0;
++}
++
++static int cmx270_marathon_remove(struct fb_info *fb)
++{
++ GPDR1 = save_lcd_regs[0];
++ GPDR2 = save_lcd_regs[1];
++ GAFR1_U = save_lcd_regs[2];
++ GAFR2_L = save_lcd_regs[3];
++ GAFR2_U = save_lcd_regs[4];
++ return 0;
++}
++
++static struct mbxfb_platform_data cmx270_2700G_data = {
++ .xres = {
++ .min = 240,
++ .max = 1200,
++ .defval = 640,
++ },
++ .yres = {
++ .min = 240,
++ .max = 1200,
++ .defval = 480,
++ },
++ .bpp = {
++ .min = 16,
++ .max = 32,
++ .defval = 16,
++ },
++ .memsize = 8*1024*1024,
++ .probe = cmx270_marathon_probe,
++ .remove = cmx270_marathon_remove,
++};
++
++static struct platform_device cmx270_2700G = {
++ .name = "mbx-fb",
++ .dev = {
++ .platform_data = &cmx270_2700G_data,
++ .dma_mask = &fb_dma_mask,
++ .coherent_dma_mask = 0xffffffff,
++ },
++ .num_resources = ARRAY_SIZE(cmx270_2700G_resource),
++ .resource = cmx270_2700G_resource,
++ .id = -1,
++};
++
++/* platform devices */
++static struct platform_device *platform_devices[] __initdata = {
++ &cmx270_device_dm9k,
++ &cmx270_audio_device,
++ &cmx270_rtc_device,
++ &cmx270_2700G,
++ &cmx270led_device,
++};
++
++#ifdef CONFIG_PCI
++/*
++ * Install handler for IT8152 IRQ. Yes, yes... we are way down the IRQ
++ * cascade which is not good for IRQ latency, but the hardware has been
++ * designed that way...
++ */
++static inline void cmx270_irq(int irq, struct pt_regs *regs)
++{
++ struct irq_desc *desc;
++ desc = irq_desc + irq;
++ desc_handle_irq(irq, desc);
++}
++
++static void cmx270_irq_demux(unsigned int irq, struct irqdesc *desc,
++ struct pt_regs *regs)
++{
++ unsigned long pdcnimr, ldcnimr;
++ int pdcnirr, ldcnir;
++
++ /* clear our parent irq */
++ GEDR(GPIO_IT8152_IRQ) = GPIO_bit(GPIO_IT8152_IRQ);
++
++ /* read pending IRQs in the chip registers and clear them */
++ pdcnirr = IT8152_INTC_PDCNIRR;
++ ldcnir = IT8152_INTC_LDCNIRR;
++ IT8152_INTC_PDCNIRR = ~pdcnirr;
++ IT8152_INTC_LDCNIRR = ~ldcnir;
++
++ /* mask ITE irqs */
++ pdcnimr = IT8152_INTC_PDCNIMR;
++ ldcnimr = IT8152_INTC_LDCNIMR;
++ IT8152_INTC_PDCNIMR = 0xffff;
++ IT8152_INTC_LDCNIMR = 0xffff;
++
++ pdcnirr &= (PCISERR_BIT | H2PTADR_BIT | H2PMAR_BIT |
++ PCI_INTD_BIT | PCI_INTC_BIT | PCI_INTB_BIT | PCI_INTA_BIT |
++ USB_INT_BIT | CDMA_INT_BIT);
++
++ ldcnir &= ITESER_BIT;
++
++ IT8152_INTC_PDCNIRR = ~pdcnirr;
++ IT8152_INTC_LDCNIRR = ~ldcnir;
++
++ /* are there interrupts pending ? */
++ if( (pdcnirr | ldcnir) ) {
++ if (pdcnirr) {
++ if( pdcnirr & PCISERR_BIT )
++ cmx270_irq(PCISERR, regs);
++ if( pdcnirr & H2PTADR_BIT )
++ cmx270_irq(H2PTADR, regs);
++ if( pdcnirr & H2PMAR_BIT )
++ cmx270_irq(H2PMAR, regs);
++ if( pdcnirr & PCI_INTA_BIT )
++ cmx270_irq(PCI_INTA, regs);
++ if( pdcnirr & PCI_INTB_BIT )
++ cmx270_irq(PCI_INTB, regs);
++ if( pdcnirr & PCI_INTC_BIT )
++ cmx270_irq(PCI_INTC, regs);
++ if( pdcnirr & PCI_INTD_BIT )
++ cmx270_irq(PCI_INTD, regs);
++ if( pdcnirr & USB_INT_BIT )
++ cmx270_irq(USB_INT, regs);
++ if( pdcnirr & CDMA_INT_BIT )
++ cmx270_irq(CDMA_INT, regs);
++ }
++ if(ldcnir) {
++ if( ldcnir & ITESER_BIT )
++ cmx270_irq(IRQ_ITESER, regs);
++ }
++ }
++
++ /* re-enable ITE interrupts */
++ IT8152_INTC_PDCNIMR = pdcnimr;
++ IT8152_INTC_LDCNIMR = ldcnimr;
++}
++#else
++unsigned long it8152_base_address = CMX270_IT8152_VIRT;
++#endif
++
++/* #define CMX270_FLASH_VIRT (CMX270_IDE104_VIRT + PXA_CS_SIZE - (8<<20)) */
++/* Map PCI companion and IDE/General Purpose CS statically */
++static struct map_desc cmx270_io_desc[] __initdata = {
++ [0] = { /* IDE/general purpose space */
++ .virtual = CMX270_IDE104_VIRT,
++ .pfn = __phys_to_pfn(CMX270_IDE104_PHYS),
++ .length = PXA_CS_SIZE - (8<<20),
++ .type = MT_DEVICE
++ },
++ [1] = { /* PCI bridge */
++ .virtual = CMX270_IT8152_VIRT,
++ .pfn = __phys_to_pfn(CMX270_IT8152_PHYS),
++ .length = PXA_CS_SIZE,
++ .type = MT_DEVICE
++ },
++};
++
++/*
++ Display definitions
++ keep these for backwards compatibility, although symbolic names (as
++ e.g. in lpd270.c) looks better
++ */
++#define MTYPE_STN320x240 0
++#define MTYPE_TFT640x480 1
++#define MTYPE_CRT640x480 2
++#define MTYPE_CRT800x600 3
++#define MTYPE_TFT320x240 6
++#define MTYPE_STN640x480 7
++
++static struct pxafb_mode_info generic_stn_320x240_mode = {
++ .pixclock = 76923,
++ .bpp = 8,
++ .xres = 320,
++ .yres = 240,
++ .hsync_len = 3,
++ .vsync_len = 2,
++ .left_margin = 3,
++ .upper_margin = 0,
++ .right_margin = 3,
++ .lower_margin = 0,
++ .sync = (FB_SYNC_HOR_HIGH_ACT |
++ FB_SYNC_VERT_HIGH_ACT),
++ .cmap_greyscale = 0,
++};
++
++static struct pxafb_mach_info generic_stn_320x240 = {
++ .modes = &generic_stn_320x240_mode,
++ .num_modes = 1,
++ .lccr0 = 0,
++ .lccr3 = (LCCR3_PixClkDiv(0x03) |
++ LCCR3_Acb(0xff) |
++ LCCR3_PCP),
++ .cmap_inverse = 0,
++ .cmap_static = 0,
++};
++
++static struct pxafb_mode_info generic_tft_640x480_mode = {
++ .pixclock = 38461,
++ .bpp = 8,
++ .xres = 640,
++ .yres = 480,
++ .hsync_len = 60,
++ .vsync_len = 2,
++ .left_margin = 70,
++ .upper_margin = 10,
++ .right_margin = 70,
++ .lower_margin = 5,
++ .sync = 0,
++ .cmap_greyscale = 0,
++};
++
++static struct pxafb_mach_info generic_tft_640x480 = {
++ .modes = &generic_tft_640x480_mode,
++ .num_modes = 1,
++ .lccr0 = (LCCR0_PAS),
++ .lccr3 = (LCCR3_PixClkDiv(0x01) |
++ LCCR3_Acb(0xff) |
++ LCCR3_PCP),
++ .cmap_inverse = 0,
++ .cmap_static = 0,
++};
++
++static struct pxafb_mode_info generic_crt_640x480_mode = {
++ .pixclock = 38461,
++ .bpp = 8,
++ .xres = 640,
++ .yres = 480,
++ .hsync_len = 63,
++ .vsync_len = 2,
++ .left_margin = 81,
++ .upper_margin = 33,
++ .right_margin = 16,
++ .lower_margin = 10,
++ .sync = (FB_SYNC_HOR_HIGH_ACT |
++ FB_SYNC_VERT_HIGH_ACT),
++ .cmap_greyscale = 0,
++};
++
++static struct pxafb_mach_info generic_crt_640x480 = {
++ .modes = &generic_crt_640x480_mode,
++ .num_modes = 1,
++ .lccr0 = (LCCR0_PAS),
++ .lccr3 = (LCCR3_PixClkDiv(0x01) |
++ LCCR3_Acb(0xff)),
++ .cmap_inverse = 0,
++ .cmap_static = 0,
++};
++
++static struct pxafb_mode_info generic_crt_800x600_mode = {
++ .pixclock = 28846,
++ .bpp = 8,
++ .xres = 800,
++ .yres = 600,
++ .hsync_len = 63,
++ .vsync_len = 2,
++ .left_margin = 26,
++ .upper_margin = 21,
++ .right_margin = 26,
++ .lower_margin = 11,
++ .sync = (FB_SYNC_HOR_HIGH_ACT |
++ FB_SYNC_VERT_HIGH_ACT),
++ .cmap_greyscale = 0,
++};
++
++static struct pxafb_mach_info generic_crt_800x600 = {
++ .modes = &generic_crt_800x600_mode,
++ .num_modes = 1,
++ .lccr0 = (LCCR0_PAS),
++ .lccr3 = (LCCR3_PixClkDiv(0x02) |
++ LCCR3_Acb(0xff)),
++ .cmap_inverse = 0,
++ .cmap_static = 0,
++};
++
++static struct pxafb_mode_info generic_tft_320x240_mode = {
++ .pixclock = 134615,
++ .bpp = 16,
++ .xres = 320,
++ .yres = 240,
++ .hsync_len = 63,
++ .vsync_len = 7,
++ .left_margin = 75,
++ .upper_margin = 0,
++ .right_margin = 15,
++ .lower_margin = 15,
++ .sync = 0,
++ .cmap_greyscale = 0,
++};
++
++static struct pxafb_mach_info generic_tft_320x240 = {
++ .modes = &generic_tft_320x240_mode,
++ .num_modes = 1,
++ .lccr0 = (LCCR0_PAS),
++ .lccr3 = (LCCR3_PixClkDiv(0x06) |
++ LCCR3_Acb(0xff) |
++ LCCR3_PCP),
++ .cmap_inverse = 0,
++ .cmap_static = 0,
++};
++
++static struct pxafb_mode_info generic_stn_640x480_mode = {
++ .pixclock = 57692,
++ .bpp = 8,
++ .xres = 640,
++ .yres = 480,
++ .hsync_len = 4,
++ .vsync_len = 2,
++ .left_margin = 10,
++ .upper_margin = 5,
++ .right_margin = 10,
++ .lower_margin = 5,
++ .sync = (FB_SYNC_HOR_HIGH_ACT |
++ FB_SYNC_VERT_HIGH_ACT),
++ .cmap_greyscale = 0,
++};
++
++static struct pxafb_mach_info generic_stn_640x480 = {
++ .modes = &generic_stn_640x480_mode,
++ .num_modes = 1,
++ .lccr0 = 0,
++ .lccr3 = (LCCR3_PixClkDiv(0x02) |
++ LCCR3_Acb(0xff)),
++ .cmap_inverse = 0,
++ .cmap_static = 0,
++};
++
++static struct pxafb_mach_info *cmx270_display = &generic_crt_640x480;
++
++static int __init cmx270_set_display(char *str)
++{
++ int disp_type = simple_strtol(str, NULL, 0);
++ switch (disp_type) {
++ case MTYPE_STN320x240:
++ cmx270_display = &generic_stn_320x240;
++ break;
++ case MTYPE_TFT640x480:
++ cmx270_display = &generic_tft_640x480;
++ break;
++ case MTYPE_CRT640x480:
++ cmx270_display = &generic_crt_640x480;
++ break;
++ case MTYPE_CRT800x600:
++ cmx270_display = &generic_crt_800x600;
++ break;
++ case MTYPE_TFT320x240:
++ cmx270_display = &generic_tft_320x240;
++ break;
++ case MTYPE_STN640x480:
++ cmx270_display = &generic_stn_640x480;
++ break;
++ default: /* fallback to CRT 640x480 */
++ cmx270_display = &generic_crt_640x480;
++ break;
++ }
++ return 1;
++}
++
++__setup("monitor=", cmx270_set_display);
++
++/* PXA27x OHCI controller setup */
++static int cmx270_ohci_init(struct device *dev)
++{
++ /* Set the Power Control Polarity Low */
++ UHCHR = (UHCHR | UHCHR_PCPL) &
++ ~(UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSE);
++
++ return 0;
++}
++
++static struct pxaohci_platform_data cmx270_ohci_platform_data = {
++ .port_mode = PMM_PERPORT_MODE,
++ .init = cmx270_ohci_init,
++};
++
++
++static int cmx270_mci_init(struct device *dev, irq_handler_t cmx270_detect_int, void *data)
++{
++ int err;
++
++ /*
++ * setup GPIO for PXA27x MMC controller
++ */
++ pxa_gpio_mode(GPIO32_MMCCLK_MD);
++ pxa_gpio_mode(GPIO112_MMCCMD_MD);
++ pxa_gpio_mode(GPIO92_MMCDAT0_MD);
++ pxa_gpio_mode(GPIO109_MMCDAT1_MD);
++ pxa_gpio_mode(GPIO110_MMCDAT2_MD);
++ pxa_gpio_mode(GPIO111_MMCDAT3_MD);
++
++ /* SB-X270 uses GPIO105 as SD power enable */
++ pxa_gpio_mode(105 | GPIO_OUT);
++
++ /* card detect IRQ on GPIO 83 */
++ pxa_gpio_mode(IRQ_TO_GPIO(CMX270_MMC_IRQ));
++ set_irq_type(CMX270_MMC_IRQ, IRQT_FALLING);
++
++ err = request_irq(CMX270_MMC_IRQ, cmx270_detect_int, SA_INTERRUPT,
++ "MMC card detect", data);
++ if (err) {
++ printk(KERN_ERR "cmx270_mci_init: MMC/SD: can't request MMC card detect IRQ\n");
++ return -1;
++ }
++
++ return 0;
++}
++
++static void cmx270_mci_setpower(struct device *dev, unsigned int vdd)
++{
++ struct pxamci_platform_data* p_d = dev->platform_data;
++
++ if (( 1 << vdd) & p_d->ocr_mask) {
++ printk(KERN_DEBUG "%s: on\n", __FUNCTION__);
++ GPCR(105) = GPIO_bit(105);
++ } else {
++ GPSR(105) = GPIO_bit(105);
++ printk(KERN_DEBUG "%s: off\n", __FUNCTION__);
++ }
++}
++
++static void cmx270_mci_exit(struct device *dev, void *data)
++{
++ free_irq(CMX270_MMC_IRQ, data);
++}
++
++static struct pxamci_platform_data cmx270_mci_platform_data = {
++ .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
++ .init = cmx270_mci_init,
++ .setpower = cmx270_mci_setpower,
++ .exit = cmx270_mci_exit,
++};
++
++#ifdef CONFIG_PM
++/* extern struct subsystem power_subsys; */
++static unsigned long sleep_save_ite[10];
++static unsigned long sleep_save_msc[10];
++
++static int cmx270_suspend(struct sys_device *dev, pm_message_t state)
++{
++#ifdef CONFIG_PCI
++ /* save ITE state */
++ sleep_save_ite[0] = IT8152_INTC_PDCNIMR;
++ sleep_save_ite[1] = IT8152_INTC_LPCNIMR;
++ sleep_save_ite[2] = IT8152_INTC_LPNIAR;
++
++ /* Clear ITE IRQ's */
++ IT8152_INTC_PDCNIRR = 0;
++ IT8152_INTC_LPCNIRR = 0;
++#endif
++
++ /* save MSC registers */
++ sleep_save_msc[0] = MSC0;
++ sleep_save_msc[1] = MSC1;
++ sleep_save_msc[2] = MSC2;
++
++ /* setup power saving mode registers */
++ PCFR = 0x0;
++ PSLR = 0xff400000;
++ PMCR = 0x00000005;
++ PWER = 0x80000000;
++ PFER = 0x00000000;
++ PRER = 0x00000000;
++ PGSR0 = 0xC0018800;
++ PGSR1 = 0x004F0002;
++ PGSR2 = 0x6021C000;
++ PGSR3 = 0x00020000;
++
++ return 0;
++}
++
++static int cmx270_resume(struct sys_device *dev)
++{
++#ifdef CONFIG_PCI
++ /* restore IT8152 state */
++ IT8152_INTC_PDCNIMR = sleep_save_ite[0];
++ IT8152_INTC_LPCNIMR = sleep_save_ite[1];
++ IT8152_INTC_LPNIAR = sleep_save_ite[2];
++#endif
++
++ /* restore MSC registers */
++ MSC0 = sleep_save_msc[0];
++ MSC1 = sleep_save_msc[1];
++ MSC2 = sleep_save_msc[2];
++
++ return 0;
++}
++
++static struct sysdev_class cmx270_pm_sysclass = {
++ set_kset_name("pm"),
++ .resume = cmx270_resume,
++ .suspend = cmx270_suspend,
++};
++
++static struct sys_device cmx270_pm_device = {
++ .cls = &cmx270_pm_sysclass,
++};
++
++static int __init cmx270_pm_init(void)
++{
++ int error;
++ error = sysdev_class_register(&cmx270_pm_sysclass);
++ if (error == 0)
++ error = sysdev_register(&cmx270_pm_device);
++ return error;
++}
++#else
++static int __init cmx270_pm_init(void) { return 0; }
++#endif
++
++static void __init cmx270_init(void)
++{
++ cmx270_pm_init();
++
++ set_pxa_fb_info(cmx270_display);
++
++ /* register CM-X270 platform devices */
++ platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
++
++ /* set MCI and OHCI platform parameters */
++ pxa_set_mci_info(&cmx270_mci_platform_data);
++ pxa_set_ohci_info(&cmx270_ohci_platform_data);
++
++ /* This enables the STUART */
++ pxa_gpio_mode(GPIO46_STRXD_MD);
++ pxa_gpio_mode(GPIO47_STTXD_MD);
++
++ /* This enables the BTUART */
++ pxa_gpio_mode(GPIO42_BTRXD_MD);
++ pxa_gpio_mode(GPIO43_BTTXD_MD);
++ pxa_gpio_mode(GPIO44_BTCTS_MD);
++ pxa_gpio_mode(GPIO45_BTRTS_MD);
++}
++
++#ifdef CONFIG_PCI
++static void cmx270_mask_irq(unsigned int irq)
++{
++ switch(irq) {
++ case IT8152_IRQ(0):
++ IT8152_INTC_PDCNIMR |= PCISERR_BIT;
++ break;
++ case IT8152_IRQ(1):
++ IT8152_INTC_PDCNIMR |= H2PTADR_BIT;
++ break;
++ case IT8152_IRQ(2):
++ IT8152_INTC_PDCNIMR |= H2PMAR_BIT;
++ break;
++ case IT8152_IRQ(3):
++ IT8152_INTC_PDCNIMR |= PCI_INTA_BIT;
++ break;
++ case IT8152_IRQ(4):
++ IT8152_INTC_PDCNIMR |= PCI_INTB_BIT;
++ break;
++ case IT8152_IRQ(5):
++ IT8152_INTC_PDCNIMR |= PCI_INTC_BIT;
++ break;
++ case IT8152_IRQ(6):
++ IT8152_INTC_PDCNIMR |= PCI_INTD_BIT;
++ break;
++ case IT8152_IRQ(7):
++ IT8152_INTC_PDCNIMR |= USB_INT_BIT;
++ break;
++ case IT8152_IRQ(9):
++ IT8152_INTC_PDCNIMR |= CDMA_INT_BIT;
++ break;
++ case IT8152_IRQ(10):
++ IT8152_INTC_LDCNIMR |= ITESER_BIT;
++ break;
++ }
++}
++
++static void cmx270_unmask_irq(unsigned int irq)
++{
++ switch(irq) {
++ case IT8152_IRQ(0):
++ IT8152_INTC_PDCNIMR &= (~PCISERR_BIT);
++ break;
++ case IT8152_IRQ(1):
++ IT8152_INTC_PDCNIMR &= (~H2PTADR_BIT);
++ break;
++ case IT8152_IRQ(2):
++ IT8152_INTC_PDCNIMR &= (~H2PMAR_BIT);
++ break;
++ case IT8152_IRQ(3):
++ IT8152_INTC_PDCNIMR &= (~PCI_INTA_BIT);
++ break;
++ case IT8152_IRQ(4):
++ IT8152_INTC_PDCNIMR &= (~PCI_INTB_BIT);
++ break;
++ case IT8152_IRQ(5):
++ IT8152_INTC_PDCNIMR &= (~PCI_INTC_BIT);
++ break;
++ case IT8152_IRQ(6):
++ IT8152_INTC_PDCNIMR &= (~PCI_INTD_BIT);
++ break;
++ case IT8152_IRQ(7):
++ IT8152_INTC_PDCNIMR &= (~USB_INT_BIT);
++ break;
++ case IT8152_IRQ(9):
++ IT8152_INTC_PDCNIMR &= (~CDMA_INT_BIT);
++ break;
++ case IT8152_IRQ(10):
++ IT8152_INTC_LDCNIMR &= (~ITESER_BIT);
++ break;
++ }
++}
++
++static struct irq_chip cmx270_irq_chip = {
++ .ack = cmx270_mask_irq,
++ .mask = cmx270_mask_irq,
++ .unmask = cmx270_unmask_irq,
++};
++#endif
++
++static void __init cmx270_init_irq(void)
++{
++ int irq;
++
++ pxa_init_irq();
++
++ IT8152_INTC_PDCNIMR = 0xffff;
++
++#ifdef CONFIG_PCI
++ /* Disable and clear IRQ's for ITE8152 */
++ IT8152_INTC_PDCNIMR = 0xffff;
++ IT8152_INTC_PDCNIRR = 0;
++ IT8152_INTC_LPCNIMR = 0xffff;
++ IT8152_INTC_LPCNIRR = 0;
++ IT8152_INTC_LDCNIMR = 0xffff;
++ IT8152_INTC_LDCNIRR = 0;
++
++ for(irq = IT8152_IRQ(0); irq <= IT8152_IRQ_MAX; irq++) {
++ set_irq_chip(irq, &cmx270_irq_chip);
++ set_irq_handler(irq, handle_level_irq);
++ set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
++ }
++
++ /* INTC signal from IT8152 is connected to GPIO0 */
++ pxa_gpio_mode(IRQ_GPIO_IT8152_IRQ);
++ set_irq_chained_handler(IRQ_GPIO_IT8152_IRQ, cmx270_irq_demux);
++ set_irq_type(IRQ_GPIO_IT8152_IRQ, IRQT_RISING);
++#endif
++
++ /* Setup interrupt for dm9000 */
++ pxa_gpio_mode(IRQ_TO_GPIO(CMX270_ETHIRQ));
++ set_irq_type(CMX270_ETHIRQ, IRQT_RISING);
++
++ /* Setup interrupt for 2700G */
++ pxa_gpio_mode(IRQ_TO_GPIO(CMX270_GFXIRQ));
++ set_irq_type(CMX270_GFXIRQ, IRQT_FALLING);
++}
++
++static void __init cmx270_map_io(void)
++{
++ pxa_map_io();
++ iotable_init(cmx270_io_desc, ARRAY_SIZE(cmx270_io_desc));
++}
++
++
++MACHINE_START(ARMCORE, "Compulab CM-x270")
++ .boot_params = 0xa0000100,
++ .phys_io = 0x40000000,
++ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
++ .map_io = cmx270_map_io,
++ .init_irq = cmx270_init_irq,
++ .timer = &pxa_timer,
++ .init_machine = cmx270_init,
++MACHINE_END
+diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
+index 87d2046..1023411 100644
+--- a/drivers/leds/Kconfig
++++ b/drivers/leds/Kconfig
+@@ -89,6 +89,12 @@ config LEDS_H1940
+ help
+ This option enables support for the LEDs on the h1940.
+
++config LEDS_CM_X270
++ tristate "LED Support for the CM-X270 LEDs"
++ depends on LEDS_CLASS && MACH_ARMCORE
++ help
++ This option enables support for the CM-X270 LEDs.
++
+ config LEDS_COBALT
+ tristate "LED Support for Cobalt Server front LED"
+ depends on LEDS_CLASS && MIPS_COBALT
+diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
+index aa2c18e..808900c 100644
+--- a/drivers/leds/Makefile
++++ b/drivers/leds/Makefile
+@@ -16,6 +16,7 @@ obj-$(CONFIG_LEDS_NET48XX) += leds-net48xx.o
+ obj-$(CONFIG_LEDS_WRAP) += leds-wrap.o
+ obj-$(CONFIG_LEDS_H1940) += leds-h1940.o
+ obj-$(CONFIG_LEDS_COBALT) += leds-cobalt.o
++obj-$(CONFIG_LEDS_CM_X270) += leds-cm-x270.o
+
+ # LED Triggers
+ obj-$(CONFIG_LEDS_TRIGGER_TIMER) += ledtrig-timer.o
+diff --git a/drivers/leds/leds-cm-x270.c b/drivers/leds/leds-cm-x270.c
+new file mode 100644
+index 0000000..63b7e9e
+--- /dev/null
++++ b/drivers/leds/leds-cm-x270.c
+@@ -0,0 +1,126 @@
++/*
++ * drivers/leds/leds-cm-x270.c
++ *
++ * Copyright 2007 CompuLab Ltd.
++ * Author: Mike Rapoport <mike@compulab.co.il>
++ *
++ * Based on leds-corgi.c
++ * Author: Richard Purdie <rpurdie@openedhand.com>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ */
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/platform_device.h>
++#include <linux/leds.h>
++
++#include <asm/arch/hardware.h>
++#include <asm/arch/pxa-regs.h>
++
++#define GPIO_RED_LED (93)
++#define GPIO_GREEN_LED (94)
++
++#define CMX270_RED_ON() GPCR(GPIO_RED_LED) = GPIO_bit(GPIO_RED_LED)
++#define CMX270_RED_OFF() GPSR(GPIO_RED_LED) = GPIO_bit(GPIO_RED_LED)
++#define CMX270_GREEN_ON() GPCR(GPIO_GREEN_LED) = GPIO_bit(GPIO_GREEN_LED)
++#define CMX270_GREEN_OFF() GPSR(GPIO_GREEN_LED) = GPIO_bit(GPIO_GREEN_LED)
++
++
++static void cmx270_red_set(struct led_classdev *led_cdev, enum led_brightness value)
++{
++ if (value)
++ CMX270_RED_ON();
++ else
++ CMX270_RED_OFF();
++}
++
++static void cmx270_green_set(struct led_classdev *led_cdev, enum led_brightness value)
++{
++ if (value)
++ CMX270_GREEN_ON();
++ else
++ CMX270_GREEN_OFF();
++}
++
++static struct led_classdev cmx270_red_led = {
++ .name = "cm-x270:red",
++ .default_trigger = "nand-disk",
++ .brightness_set = cmx270_red_set,
++};
++
++static struct led_classdev cmx270_green_led = {
++ .name = "cm-x270:green",
++ .default_trigger = "heartbeat",
++ .brightness_set = cmx270_green_set,
++};
++
++#ifdef CONFIG_PM
++static int cmx270led_suspend(struct platform_device *dev, pm_message_t state)
++{
++ led_classdev_suspend(&cmx270_red_led);
++ led_classdev_suspend(&cmx270_green_led);
++ return 0;
++}
++
++static int cmx270led_resume(struct platform_device *dev)
++{
++ led_classdev_resume(&cmx270_red_led);
++ led_classdev_resume(&cmx270_green_led);
++ return 0;
++}
++#endif
++
++static int cmx270led_probe(struct platform_device *pdev)
++{
++ int ret;
++
++ ret = led_classdev_register(&pdev->dev, &cmx270_red_led);
++ if (ret < 0)
++ return ret;
++
++ ret = led_classdev_register(&pdev->dev, &cmx270_green_led);
++ if (ret < 0)
++ led_classdev_unregister(&cmx270_red_led);
++
++ return ret;
++}
++
++static int cmx270led_remove(struct platform_device *pdev)
++{
++ led_classdev_unregister(&cmx270_red_led);
++ led_classdev_unregister(&cmx270_green_led);
++ return 0;
++}
++
++static struct platform_driver cmx270led_driver = {
++ .probe = cmx270led_probe,
++ .remove = cmx270led_remove,
++#ifdef CONFIG_PM
++ .suspend = cmx270led_suspend,
++ .resume = cmx270led_resume,
++#endif
++ .driver = {
++ .name = "cm-x270-led",
++ },
++};
++
++static int __init cmx270led_init(void)
++{
++ return platform_driver_register(&cmx270led_driver);
++}
++
++static void __exit cmx270led_exit(void)
++{
++ platform_driver_unregister(&cmx270led_driver);
++}
++
++module_init(cmx270led_init);
++module_exit(cmx270led_exit);
++
++MODULE_AUTHOR("Richard Purdie <rpurdie@openedhand.com>");
++MODULE_DESCRIPTION("Corgi LED driver");
++MODULE_LICENSE("GPL");
+diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
+index b49375a..7ee6561 100644
+--- a/drivers/net/Kconfig
++++ b/drivers/net/Kconfig
+@@ -875,6 +875,14 @@ config DM9000
+ <file:Documentation/networking/net-modules.txt>. The module will be
+ called dm9000.
+
++config DM9000_NOEPROM
++ bool "DM9000 without EEPROM attached"
++ depends on DM9000
++ ---help---
++ Select this option if you have DM9000 chipset without EEPROM
++ containing the MAC address. In this case MAC address should
++ be set either by the bootloader or using ifconfig
++
+ config SMC911X
+ tristate "SMSC LAN911[5678] support"
+ select CRC32
+diff --git a/drivers/net/dm9000.c b/drivers/net/dm9000.c
+index 264fa0e..4e2954b 100644
+--- a/drivers/net/dm9000.c
++++ b/drivers/net/dm9000.c
+@@ -562,6 +562,7 @@ dm9000_probe(struct platform_device *pdev)
+ db->mii.mdio_read = dm9000_phy_read;
+ db->mii.mdio_write = dm9000_phy_write;
+
++#ifndef CONFIG_DM9000_NOEPROM
+ /* Read SROM content */
+ for (i = 0; i < 64; i++)
+ ((u16 *) db->srom)[i] = read_srom_word(db, i);
+@@ -569,6 +570,11 @@ dm9000_probe(struct platform_device *pdev)
+ /* Set Node Address */
+ for (i = 0; i < 6; i++)
+ ndev->dev_addr[i] = db->srom[i];
++#else
++ /* The Node Address was set by bootloader */
++ for (i=0; i<6; i++)
++ ndev->dev_addr[i] = ior(db, 0x10+i);
++#endif
+
+ if (!is_valid_ether_addr(ndev->dev_addr)) {
+ /* try reading from mac */
+diff --git a/include/asm-arm/arch-pxa/cm-x270.h b/include/asm-arm/arch-pxa/cm-x270.h
+new file mode 100644
+index 0000000..24613a5
+--- /dev/null
++++ b/include/asm-arm/arch-pxa/cm-x270.h
+@@ -0,0 +1,71 @@
++/*
++ * linux/include/asm/arch-pxa/armcore.h
++ *
++ * Compulab Ltd., 2003
++ *
++ * ARMCore registers
++ */
++
++
++#define CMX270_CS1_PHYS (PXA_CS1_PHYS)
++#define MARATHON_PHYS (PXA_CS2_PHYS)
++#define CMX270_IDE104_PHYS (PXA_CS3_PHYS)
++#define CMX270_IT8152_PHYS (PXA_CS4_PHYS)
++
++#define PXA_CS_SIZE (64*1024*1024)
++
++/* Virtual map */
++
++#define CMX270_VIRT_BASE (0xe8000000)
++
++#define CMX270_IT8152_VIRT (CMX270_VIRT_BASE)
++#define CMX270_IDE104_VIRT (CMX270_IT8152_VIRT + PXA_CS_SIZE)
++
++
++/* GPIO related definitions */
++#define GPIO_IT8152_IRQ (22)
++#define GPIO_RED_LED (93)
++#define GPIO_GREEN_LED (94)
++
++
++#define IRQ_GPIO_IT8152_IRQ IRQ_GPIO(GPIO_IT8152_IRQ)
++#define PME_IRQ IRQ_GPIO(0)
++#define CMX270_IDE_IRQ IRQ_GPIO(100)
++#define CMX270_GPIRQ1 IRQ_GPIO(101)
++#define CMX270_TOUCHIRQ IRQ_GPIO(96)
++#define CMX270_ETHIRQ IRQ_GPIO(10)
++#define CMX270_GFXIRQ IRQ_GPIO(95)
++#define CMX270_NANDIRQ IRQ_GPIO(89)
++#define CMX270_MMC_IRQ IRQ_GPIO(83)
++
++/* LED macros */
++#define CMX270_RED_ON() GPCR(GPIO_RED_LED) = GPIO_bit(GPIO_RED_LED)
++#define CMX270_RED_OFF() GPSR(GPIO_RED_LED) = GPIO_bit(GPIO_RED_LED)
++#define CMX270_GREEN_ON() GPCR(GPIO_GREEN_LED) = GPIO_bit(GPIO_GREEN_LED)
++#define CMX270_GREEN_OFF() GPSR(GPIO_GREEN_LED) = GPIO_bit(GPIO_GREEN_LED)
++
++/* PCMCIA related definitions */
++#define PCC_DETECT(x) (GPLR(84 - (x)) & GPIO_bit(84 - (x)))
++#define PCC_READY(x) (GPLR(82 - (x)) & GPIO_bit(81 - (x)))
++
++#define PCMCIA_S0_CD_VALID IRQ_GPIO(84)
++#define PCMCIA_S0_CD_VALID_EDGE GPIO_BOTH_EDGES
++
++#define PCMCIA_S1_CD_VALID IRQ_GPIO(83)
++#define PCMCIA_S1_CD_VALID_EDGE GPIO_BOTH_EDGES
++
++#define PCMCIA_S0_RDYINT IRQ_GPIO(82)
++#define PCMCIA_S1_RDYINT IRQ_GPIO(81)
++
++#define PCMCIA_RESET_GPIO 53
++
++
++
++
++
++
++
++
++
++
++
+diff --git a/include/asm-arm/arch-pxa/hardware.h b/include/asm-arm/arch-pxa/hardware.h
+index e2bdc2f..989303a 100644
+--- a/include/asm-arm/arch-pxa/hardware.h
++++ b/include/asm-arm/arch-pxa/hardware.h
+@@ -90,4 +90,15 @@ extern unsigned int get_lcdclk_frequency_10khz(void);
+
+ #endif
+
++#if defined(CONFIG_MACH_ARMCORE) && defined(CONFIG_PCI)
++#define HAVE_ARCH_PCI_SET_DMA_MASK
++#ifndef __ASSEMBLY__
++extern unsigned long armcore_pcibios_min_io;
++extern unsigned long armcore_pcibios_min_mem;
++#endif
++#define PCIBIOS_MIN_IO (armcore_pcibios_min_io)
++#define PCIBIOS_MIN_MEM (armcore_pcibios_min_mem)
++#define pcibios_assign_all_busses() 1
++#endif
++
+ #endif /* _ASM_ARCH_HARDWARE_H */
+diff --git a/include/asm-arm/arch-pxa/irqs.h b/include/asm-arm/arch-pxa/irqs.h
+index 67ed436..f9c075f 100644
+--- a/include/asm-arm/arch-pxa/irqs.h
++++ b/include/asm-arm/arch-pxa/irqs.h
+@@ -222,3 +222,23 @@
+ #define IRQ_LOCOMO_GPIO_BASE (IRQ_BOARD_START + 1)
+ #define IRQ_LOCOMO_LT_BASE (IRQ_BOARD_START + 2)
+ #define IRQ_LOCOMO_SPI_BASE (IRQ_BOARD_START + 3)
++
++/* ITE8152 irqs on CM-x2xx */
++#ifdef CONFIG_MACH_ARMCORE
++#define IT8152_IRQ(x) (IRQ_BOARD_START + (x))
++#define PCISERR IT8152_IRQ(0)
++#define H2PTADR IT8152_IRQ(1)
++#define H2PMAR IT8152_IRQ(2)
++#define PCI_INTA IT8152_IRQ(3)
++#define PCI_INTB IT8152_IRQ(4)
++#define PCI_INTC IT8152_IRQ(5)
++#define PCI_INTD IT8152_IRQ(6)
++#define USB_INT IT8152_IRQ(7)
++#define AUDIO_INT IT8152_IRQ(8)
++#define CDMA_INT IT8152_IRQ(9)
++#define IRQ_ITESER IT8152_IRQ(10)
++#define IT8152_IRQ_MAX IT8152_IRQ(10)
++
++#undef NR_IRQS
++#define NR_IRQS IT8152_IRQ_MAX+1
++#endif
+diff --git a/include/asm-arm/memory.h b/include/asm-arm/memory.h
+index d9bfb39..83db3cb 100644
+--- a/include/asm-arm/memory.h
++++ b/include/asm-arm/memory.h
+@@ -141,6 +141,16 @@
+ * allocations. This must be the smallest DMA mask in the system,
+ * so a successful GFP_DMA allocation will always satisfy this.
+ */
++
++#ifdef CONFIG_PCI_HOST_ITE8152
++void it8152_adjust_zones(int node, unsigned long *size, unsigned long *holes);
++
++#define arch_adjust_zones(node, size, holes) \
++ it8152_adjust_zones(node, size, holes)
++
++#define ISA_DMA_THRESHOLD (PHYS_OFFSET + SZ_64M - 1)
++#endif
++
+ #ifndef ISA_DMA_THRESHOLD
+ #define ISA_DMA_THRESHOLD (0xffffffffULL)
+ #endif
+--
+1.5.1.6
+
diff --git a/recipes/linux/linux-2.6.22/cm-x270/0002-cm-x270-match-type.patch b/recipes/linux/linux-2.6.22/cm-x270/0002-cm-x270-match-type.patch
new file mode 100644
index 0000000000..68da30191c
--- /dev/null
+++ b/recipes/linux/linux-2.6.22/cm-x270/0002-cm-x270-match-type.patch
@@ -0,0 +1,25 @@
+From e566813cedb9f91724597df45c11075023a7b589 Mon Sep 17 00:00:00 2001
+From: Cliff Brake <cbrake@happy.dev.bec-systems.com>
+Date: Fri, 20 Jul 2007 18:58:27 -0400
+Subject: [PATCH] cm-x270-match-type
+
+---
+ arch/arm/boot/compressed/head-xscale.S | 5 +++++
+ 1 files changed, 5 insertions(+), 0 deletions(-)
+
+diff --git a/arch/arm/boot/compressed/head-xscale.S b/arch/arm/boot/compressed/head-xscale.S
+index 73c5d9e..dc89459 100644
+--- a/arch/arm/boot/compressed/head-xscale.S
++++ b/arch/arm/boot/compressed/head-xscale.S
+@@ -53,3 +53,8 @@ __XScale_start:
+ str r1, [r0, #0x18]
+ #endif
+
++#if defined(CONFIG_MACH_ARMCORE)
++ mov r7, #(MACH_TYPE_ARMCORE & 0xFF00)
++ add r7, r7, #(MACH_TYPE_ARMCORE & 0xFF)
++#endif
++
+--
+1.5.1.6
+
diff --git a/recipes/linux/linux-2.6.22/cm-x270/0003-cm-x270-ide.patch b/recipes/linux/linux-2.6.22/cm-x270/0003-cm-x270-ide.patch
new file mode 100644
index 0000000000..0ff115efc8
--- /dev/null
+++ b/recipes/linux/linux-2.6.22/cm-x270/0003-cm-x270-ide.patch
@@ -0,0 +1,186 @@
+From f260d5fa4c99cd7df949e6408af59807f8ccf224 Mon Sep 17 00:00:00 2001
+From: Cliff Brake <cbrake@happy.dev.bec-systems.com>
+Date: Fri, 20 Jul 2007 18:59:39 -0400
+Subject: [PATCH] cm-x270-ide
+
+---
+ drivers/ide/Kconfig | 8 +++
+ drivers/ide/arm/Makefile | 1 +
+ drivers/ide/arm/cm-x270-ide.c | 135 +++++++++++++++++++++++++++++++++++++++++
+ 3 files changed, 144 insertions(+), 0 deletions(-)
+ create mode 100644 drivers/ide/arm/cm-x270-ide.c
+
+diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
+index b1a9b81..7de4155 100644
+--- a/drivers/ide/Kconfig
++++ b/drivers/ide/Kconfig
+@@ -864,6 +864,14 @@ config BLK_DEV_IDE_BAST
+ Say Y here if you want to support the onboard IDE channels on the
+ Simtec BAST or the Thorcom VR1000
+
++config BLK_DEV_IDE_CM_X270
++ tristate "CompuLab CM-X270 IDE support"
++ depends on ARM && (MACH_ARMCORE)
++ help
++ Say Y here if you want to support the onboard IDE channels on the
++ CompuLab CM-X270 module
++
++
+ config BLK_DEV_GAYLE
+ bool "Amiga Gayle IDE interface support"
+ depends on AMIGA
+diff --git a/drivers/ide/arm/Makefile b/drivers/ide/arm/Makefile
+index 6a78f07..e5cadb7 100644
+--- a/drivers/ide/arm/Makefile
++++ b/drivers/ide/arm/Makefile
+@@ -2,5 +2,6 @@
+ obj-$(CONFIG_BLK_DEV_IDE_ICSIDE) += icside.o
+ obj-$(CONFIG_BLK_DEV_IDE_RAPIDE) += rapide.o
+ obj-$(CONFIG_BLK_DEV_IDE_BAST) += bast-ide.o
++obj-$(CONFIG_BLK_DEV_IDE_CM_X270) += cm-x270-ide.o
+
+ EXTRA_CFLAGS := -Idrivers/ide
+diff --git a/drivers/ide/arm/cm-x270-ide.c b/drivers/ide/arm/cm-x270-ide.c
+new file mode 100644
+index 0000000..a8b15aa
+--- /dev/null
++++ b/drivers/ide/arm/cm-x270-ide.c
+@@ -0,0 +1,135 @@
++/* linux/drivers/ide/arm/cm-x270-ide.c
++ *
++ * Copyright (c) 2006 CompuLab, Ltd
++ * Mike Rapoport <mike@compulab.co.il>
++ *
++ * Based on linux/drivers/ide/arm/bast-ide.c
++ * Copyright (c) 2003-2004 Simtec Electronics
++ * Ben Dooks <ben@simtec.co.uk>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ */
++
++#include <linux/module.h>
++#include <linux/errno.h>
++#include <linux/ide.h>
++#include <linux/init.h>
++#include <linux/irq.h>
++
++#include <asm/mach-types.h>
++
++#include <asm/io.h>
++#include <asm/arch/pxa-regs.h>
++#include <asm/arch/cm-x270.h>
++
++#define CMX270_SB270_IDECS0_VIRT (CMX270_IDE104_VIRT + (1<<24) + (1<<25))
++#define CMX270_SB270_IDECS1_VIRT (CMX270_IDE104_VIRT + (1<<25))
++#define CMX270_ATX_IDECS0_VIRT (CMX270_IDE104_VIRT + (1<<25))
++#define CMX270_ATX_IDECS1_VIRT (CMX270_IDE104_VIRT + (1<<25) + (1<<22))
++
++/* list of registered interfaces */
++static ide_hwif_t *ifs[1];
++
++static int __init
++cmx270_ide_register(unsigned int base, unsigned int aux, int irq,
++ ide_hwif_t **hwif)
++{
++ hw_regs_t hw;
++
++ memset(&hw, 0, sizeof(hw));
++
++ if(!base || !aux) return -EINVAL;
++
++ printk(KERN_DEBUG "%s: base = %08x, aux = %08x\n", __FUNCTION__,
++ base, aux);
++
++ /* Different mappings for local bus IDE and PCMCIA IDE */
++ if(base == CMX270_SB270_IDECS0_VIRT) {
++ hw.io_ports[IDE_DATA_OFFSET] = base + 0;
++ hw.io_ports[IDE_ERROR_OFFSET] = base + (0x1<<3);
++ hw.io_ports[IDE_NSECTOR_OFFSET]= base + (0x2<<3);
++ hw.io_ports[IDE_SECTOR_OFFSET]= base + (0x3<<3);
++ hw.io_ports[IDE_LCYL_OFFSET]= base + (0x4<<3);
++ hw.io_ports[IDE_HCYL_OFFSET]= base + (0x5<<3);
++ hw.io_ports[IDE_SELECT_OFFSET]= base + (0x6<<3);
++ hw.io_ports[IDE_STATUS_OFFSET]= base + (0x7<<3);
++ hw.io_ports[IDE_CONTROL_OFFSET] = aux+(0x6<<3);
++ }
++ else if (base == CMX270_ATX_IDECS0_VIRT) { /* atx base */
++ hw.io_ports[IDE_DATA_OFFSET] = base + 0;
++ hw.io_ports[IDE_ERROR_OFFSET] = base + 8;
++ hw.io_ports[IDE_NSECTOR_OFFSET]= base + 2;
++ hw.io_ports[IDE_SECTOR_OFFSET]= base + 10;
++ hw.io_ports[IDE_LCYL_OFFSET]= base + 4;
++ hw.io_ports[IDE_HCYL_OFFSET]= base + 12;
++ hw.io_ports[IDE_SELECT_OFFSET]= base + 6; //6;
++ hw.io_ports[IDE_STATUS_OFFSET]= base + 14;
++ hw.io_ports[IDE_CONTROL_OFFSET] = (aux+0x6);
++ } else {
++ printk(KERN_DEBUG "%s: registering wrong IDE i/f\n", __FUNCTION__);
++ hw.io_ports[IDE_DATA_OFFSET] = base + 8;
++ hw.io_ports[IDE_ERROR_OFFSET] = base + 13;
++ hw.io_ports[IDE_NSECTOR_OFFSET] = base + 2;
++ hw.io_ports[IDE_SECTOR_OFFSET] = base + 3;
++ hw.io_ports[IDE_LCYL_OFFSET] = base + 4;
++ hw.io_ports[IDE_HCYL_OFFSET] = base + 5;
++ hw.io_ports[IDE_SELECT_OFFSET] = base + 6;
++ hw.io_ports[IDE_STATUS_OFFSET] = base + 7;
++ hw.io_ports[IDE_CONTROL_OFFSET] = aux;
++ }
++
++ hw.irq = irq;
++
++ return ide_register_hw(&hw, hwif);
++}
++
++static int __init cmx270_ide_init(void)
++{
++ int retval = 0;
++
++ if (!(machine_is_armcore()))
++ goto out;
++
++ printk("CM-X270: initializing IDE interface\n");
++
++ MSC1 = 0x7ffc7ff4;
++
++ /* Interrupts on rising edge: lines are inverted before they get to
++ the PXA */
++ pxa_gpio_mode(IRQ_TO_GPIO(CMX270_IDE_IRQ));
++
++ /* try SB-X270 */
++ set_irq_type(CMX270_IDE_IRQ, IRQ_TYPE_EDGE_RISING);
++ retval = cmx270_ide_register(CMX270_SB270_IDECS0_VIRT,
++ CMX270_SB270_IDECS1_VIRT,
++ CMX270_IDE_IRQ, &ifs[0]);
++ if (retval >= 0) {
++ printk(KERN_DEBUG "%s: found IDE interface on SB-X270\n",
++ __FUNCTION__);
++ goto out;
++ }
++
++ /* SB-X270 detection failed, try ATX */
++ set_irq_type(CMX270_IDE_IRQ, IRQ_TYPE_EDGE_FALLING);
++ retval = cmx270_ide_register(CMX270_ATX_IDECS0_VIRT,
++ CMX270_ATX_IDECS1_VIRT,
++ CMX270_IDE_IRQ, &ifs[0]);
++
++ if ( retval >= 0 ) {
++ printk(KERN_DEBUG "%s: found IDE interface on ATX\n",
++ __FUNCTION__);
++ goto out;
++ }
++
++ out:
++ return retval;
++}
++
++module_init(cmx270_ide_init);
++
++MODULE_AUTHOR("CompuLab");
++MODULE_LICENSE("GPL");
++MODULE_DESCRIPTION("CompuLab CM-X270 IDE driver");
+--
+1.5.1.6
+
diff --git a/recipes/linux/linux-2.6.22/cm-x270/0004-cm-x270-it8152.patch b/recipes/linux/linux-2.6.22/cm-x270/0004-cm-x270-it8152.patch
new file mode 100644
index 0000000000..274eaf24d8
--- /dev/null
+++ b/recipes/linux/linux-2.6.22/cm-x270/0004-cm-x270-it8152.patch
@@ -0,0 +1,496 @@
+From 1306abec905df1ff5cf2b1d91ac0d94d18d96c5b Mon Sep 17 00:00:00 2001
+From: Cliff Brake <cbrake@happy.dev.bec-systems.com>
+Date: Fri, 20 Jul 2007 19:00:07 -0400
+Subject: [PATCH] cm-x270-it8152
+
+---
+ arch/arm/common/Makefile | 1 +
+ arch/arm/common/it8152.c | 272 +++++++++++++++++++++++++++++++++++++
+ arch/arm/kernel/bios32.c | 28 ++++-
+ include/asm-arm/hardware/it8152.h | 104 ++++++++++++++
+ include/asm-arm/pci.h | 7 +
+ include/linux/pci_ids.h | 1 +
+ 6 files changed, 410 insertions(+), 3 deletions(-)
+ create mode 100644 arch/arm/common/it8152.c
+ create mode 100644 include/asm-arm/hardware/it8152.h
+
+diff --git a/arch/arm/common/Makefile b/arch/arm/common/Makefile
+index e1289a2..3d0b9fa 100644
+--- a/arch/arm/common/Makefile
++++ b/arch/arm/common/Makefile
+@@ -17,3 +17,4 @@ obj-$(CONFIG_SHARPSL_PM) += sharpsl_pm.o
+ obj-$(CONFIG_SHARP_SCOOP) += scoop.o
+ obj-$(CONFIG_ARCH_IXP2000) += uengine.o
+ obj-$(CONFIG_ARCH_IXP23XX) += uengine.o
++obj-$(CONFIG_PCI_HOST_ITE8152) += it8152.o
+diff --git a/arch/arm/common/it8152.c b/arch/arm/common/it8152.c
+new file mode 100644
+index 0000000..8563610
+--- /dev/null
++++ b/arch/arm/common/it8152.c
+@@ -0,0 +1,272 @@
++/*
++ * arch/arm/common/it8152.c: PCI functions for IT8152
++ *
++ * Compulab Ltd, 2002-2006
++ *
++ * The DMA bouncing is taken from arch/arm/mach-ixp4xx/common-pci.c
++ * (see this file for respective copyrights)
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#include <linux/sched.h>
++#include <linux/kernel.h>
++#include <linux/pci.h>
++#include <linux/ptrace.h>
++#include <linux/interrupt.h>
++#include <linux/mm.h>
++#include <linux/slab.h>
++#include <linux/init.h>
++#include <linux/ioport.h>
++#include <asm/mach/map.h>
++
++
++#include <asm/io.h>
++#include <asm/irq.h>
++#include <asm/system.h>
++#include <asm/mach/pci.h>
++#include <asm/hardware/it8152.h>
++
++#define MAX_SLOTS 21
++
++static unsigned long
++it8152_pci_dev_base_address(struct pci_bus *bus, unsigned int devfn)
++{
++ unsigned long addr = 0;
++
++ if (bus->number == 0) {
++ if (devfn < PCI_DEVFN(MAX_SLOTS, 0))
++ addr = (devfn << 8);
++ } else
++ addr = (bus->number << 16) | (devfn << 8);
++
++ return addr;
++}
++
++static int
++it8152_pci_read_config(struct pci_bus *bus, unsigned int devfn, int where,
++ int size, u32 *value)
++{
++ unsigned long addr = it8152_pci_dev_base_address(bus, devfn);
++ u32 v;
++ int shift;
++
++#ifdef CONFIG_MACH_ARMCORE
++ if(devfn!=0) IT8152_GPIO_GPLR=0x00;
++#endif
++ shift = (where & 3);
++
++ IT8152_PCI_CFG_ADDR = (addr + where);
++ v = (IT8152_PCI_CFG_DATA >> (8 * (shift)));
++
++ *value = v;
++
++#ifdef CONFIG_MACH_ARMCORE
++ if(devfn!=0) IT8152_GPIO_GPLR=0x20;
++#endif
++
++ return PCIBIOS_SUCCESSFUL;
++}
++
++
++static int
++it8152_pci_write_config(struct pci_bus *bus, unsigned int devfn, int where,
++ int size, u32 value)
++{
++ unsigned long addr = it8152_pci_dev_base_address(bus, devfn);
++ u32 v, vtemp, mask=0;
++ int shift;
++
++#ifdef CONFIG_MACH_ARMCORE
++ if(devfn!=0) IT8152_GPIO_GPLR=0x00;
++#endif
++
++ if(size==1) mask=0xff;
++ if(size==2) mask=0xffff;
++
++ shift = (where & 3);
++
++ IT8152_PCI_CFG_ADDR = addr + where;
++ vtemp = IT8152_PCI_CFG_DATA;
++
++ if(mask) vtemp &= ~(mask << (8 * shift));
++ else vtemp = 0;
++
++ v = (value << (8 * shift));
++ IT8152_PCI_CFG_ADDR = addr + where;
++ IT8152_PCI_CFG_DATA = (v | vtemp);
++
++#ifdef CONFIG_MACH_ARMCORE
++ if(devfn!=0) IT8152_GPIO_GPLR=0x20;
++#endif
++
++ return PCIBIOS_SUCCESSFUL;
++}
++
++static struct pci_ops it8152_ops = {
++ .read = it8152_pci_read_config,
++ .write = it8152_pci_write_config,
++};
++
++static struct resource it8152_io = {
++ .name = "IT8152 PCI I/O region",
++ .flags = IORESOURCE_IO,
++};
++
++static struct resource it8152_mem1 = {
++ .name = "First IT8152 PCI memory region",
++ .start = 0x10000000,
++ .end = 0x13e00000,
++ .flags = IORESOURCE_MEM,
++};
++
++/*
++ * The following functions are needed for DMA bouncing.
++ * ITE8152 chip can addrees up to 64MByte, so all the devices
++ * connected to ITE8152 (PCI and USB) should have limited DMA window
++ */
++
++/*
++ * Setup DMA mask to 64MB on devices connected to ITE8152. Ignore all
++ * other devices.
++ */
++static int it8152_pci_platform_notify(struct device *dev)
++{
++ if ( dev->bus == &pci_bus_type ) {
++ if ( dev->dma_mask )
++ *dev->dma_mask = (SZ_64M - 1) | PHYS_OFFSET;
++ dev->coherent_dma_mask = (SZ_64M - 1) | PHYS_OFFSET;
++ dmabounce_register_dev(dev, 2048, 4096);
++ }
++ return 0;
++}
++
++static int it8152_pci_platform_notify_remove(struct device *dev)
++{
++ if ( dev->bus == &pci_bus_type ) {
++ dmabounce_unregister_dev(dev);
++ }
++ return 0;
++}
++
++int dma_needs_bounce(struct device *dev, dma_addr_t dma_addr, size_t size)
++{
++ dev_dbg(dev, "%s: dma_addr %08x, size %08x\n",
++ __FUNCTION__, dma_addr, size);
++ return (dev->bus == &pci_bus_type ) &&
++ ((dma_addr + size - PHYS_OFFSET) >= SZ_64M);
++}
++
++/*
++ * Only first 64MB of memory can be accessed via PCI.
++ * We use GFP_DMA to allocate safe buffers to do map/unmap.
++ * This is really ugly and we need a better way of specifying
++ * DMA-capable regions of memory.
++ */
++void __init it8152_adjust_zones(int node, unsigned long *zone_size,
++ unsigned long *zhole_size)
++{
++ unsigned int sz = SZ_64M >> PAGE_SHIFT;
++
++ /*
++ * Only adjust if > 64M on current system
++ */
++ if (node || (zone_size[0] <= sz))
++ return;
++
++ zone_size[1] = zone_size[0] - sz;
++ zone_size[0] = sz;
++ zhole_size[1] = zhole_size[0];
++ zhole_size[0] = 0;
++}
++
++/*
++ * We override these so we properly do dmabounce otherwise drivers
++ * are able to set the dma_mask to 0xffffffff and we can no longer
++ * trap bounces. :(
++ *
++ * We just return true on everyhing except for < 64MB in which case
++ * we will fail miseralby and die since we can't handle that case.
++ */
++int
++pci_set_dma_mask(struct pci_dev *dev, u64 mask)
++{
++ printk(KERN_INFO "===> %s: %s %x\n", __FUNCTION__, dev->dev.bus_id, mask);
++ if (mask >= PHYS_OFFSET + SZ_64M - 1 )
++ return 0;
++
++ return -EIO;
++}
++
++int
++pci_set_consistent_dma_mask(struct pci_dev *dev, u64 mask)
++{
++ printk(KERN_INFO "===> %s: %s %x\n", __FUNCTION__, dev->dev.bus_id, mask);
++ if (mask >= PHYS_OFFSET + SZ_64M - 1 )
++ return 0;
++
++ return -EIO;
++}
++
++EXPORT_SYMBOL(pci_set_dma_mask);
++EXPORT_SYMBOL(pci_set_consistent_dma_mask);
++
++
++int __init it8152_pci_setup(int nr, struct pci_sys_data *sys)
++{
++ it8152_io.start = IT8152_IO_BASE + 0x12000;
++ it8152_io.end = IT8152_IO_BASE + 0x100000;
++
++ if (request_resource(&ioport_resource, &it8152_io)) {
++ printk(KERN_ERR "PCI: unable to allocate IO region\n");
++ return -EBUSY;
++ }
++ if (request_resource(&iomem_resource, &it8152_mem1)) {
++ printk(KERN_ERR "PCI: unable to allocate memory region\n");
++ return -EBUSY;
++ }
++
++ sys->resource[0] = &it8152_io;
++ sys->resource[1] = &it8152_mem1;
++
++ if (platform_notify || platform_notify_remove) {
++ printk(KERN_ERR "PCI: Can't use platform_notify\n");
++ return -EBUSY;
++ }
++
++ platform_notify = it8152_pci_platform_notify;
++ platform_notify_remove = it8152_pci_platform_notify_remove;
++
++ return 1;
++}
++
++/*
++ * If we set up a device for bus mastering, we need to check the latency
++ * timer as we don't have even crappy BIOSes to set it properly.
++ * The implementation is from arch/i386/pci/i386.c
++ */
++unsigned int pcibios_max_latency = 255;
++
++void pcibios_set_master(struct pci_dev *dev)
++{
++ u8 lat;
++
++ pci_read_config_byte(dev, PCI_LATENCY_TIMER, &lat);
++ if (lat < 16)
++ lat = (64 <= pcibios_max_latency) ? 64 : pcibios_max_latency;
++ else if (lat > pcibios_max_latency)
++ lat = pcibios_max_latency;
++ else
++ return;
++ printk(KERN_DEBUG "PCI: Setting latency timer of device %s to %d\n", pci_name(dev), lat);
++ pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat);
++}
++
++
++struct pci_bus * __init it8152_pci_scan_bus(int nr, struct pci_sys_data *sys)
++{
++ return pci_scan_bus(nr, &it8152_ops, sys);
++}
++
+diff --git a/arch/arm/kernel/bios32.c b/arch/arm/kernel/bios32.c
+index 240c448..d8d2352 100644
+--- a/arch/arm/kernel/bios32.c
++++ b/arch/arm/kernel/bios32.c
+@@ -279,6 +279,25 @@ static void __devinit pci_fixup_cy82c693(struct pci_dev *dev)
+ }
+ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_CONTAQ, PCI_DEVICE_ID_CONTAQ_82C693, pci_fixup_cy82c693);
+
++static void __init pci_fixup_it8152(struct pci_dev *dev)
++{
++ int i;
++ /* fixup for ITE 8152 devices */
++ /* FIXME: add defines for class 0x68000 and 0x80103 */
++ if ((dev->class >> 8) == PCI_CLASS_BRIDGE_HOST ||
++ dev->class == 0x68000 ||
++ dev->class == 0x80103) {
++ for (i = 0; i < PCI_NUM_RESOURCES; i++) {
++ dev->resource[i].start = 0;
++ dev->resource[i].end = 0;
++ dev->resource[i].flags = 0;
++ }
++ }
++}
++DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ITE, PCI_DEVICE_ID_ITE_8152, pci_fixup_it8152);
++
++
++
+ void __devinit pcibios_update_irq(struct pci_dev *dev, int irq)
+ {
+ if (debug_pci)
+@@ -292,9 +311,12 @@ void __devinit pcibios_update_irq(struct pci_dev *dev, int irq)
+ */
+ static inline int pdev_bad_for_parity(struct pci_dev *dev)
+ {
+- return (dev->vendor == PCI_VENDOR_ID_INTERG &&
+- (dev->device == PCI_DEVICE_ID_INTERG_2000 ||
+- dev->device == PCI_DEVICE_ID_INTERG_2010));
++ return ((dev->vendor == PCI_VENDOR_ID_INTERG &&
++ (dev->device == PCI_DEVICE_ID_INTERG_2000 ||
++ dev->device == PCI_DEVICE_ID_INTERG_2010)) ||
++ (dev->vendor == PCI_VENDOR_ID_ITE &&
++ dev->device == PCI_DEVICE_ID_ITE_8152));
++
+ }
+
+ /*
+diff --git a/include/asm-arm/hardware/it8152.h b/include/asm-arm/hardware/it8152.h
+new file mode 100644
+index 0000000..d28210d
+--- /dev/null
++++ b/include/asm-arm/hardware/it8152.h
+@@ -0,0 +1,104 @@
++/*
++ * arch/arm/mach-pxa/it8152.h
++ *
++ * Compulab Ltd., 2006
++ *
++ * ITE 8152 companion chip definitions
++ */
++
++
++/* #define CMX270_IT8152_VIRT (CMX270_VIRT_BASE) */
++
++
++extern unsigned long it8152_base_address;
++
++#define IT8152_IO_BASE (it8152_base_address + 0x03e00000)
++#define IT8152_CFGREG_BASE (it8152_base_address + 0x03f00000)
++
++/* #define IRQ_GPIO_IT8152_IRQ IRQ_GPIO(GPIO_IT8152_IRQ) */
++
++#define IT8152_SHORT_IO(x) (*((volatile unsigned short *)(IT8152_CFGREG_BASE+(x))))
++#define IT8152_LONG_IO(x) (*((volatile unsigned long *)(IT8152_CFGREG_BASE+(x))))
++
++
++#define IT8152_PCI_MEMBASE (*((volatile unsigned long *)(it8152_base_address)))
++/* #define IT8152_PCI_IOBASE (*((volatile unsigned long *)(it8152_base_address + 0x3e00000))) */
++
++#define IT8152_PCI_IACK (*((volatile unsigned long *)(it8152_base_address + 0x3f00808)))
++#define IT8152_PCI_CFG_ADDR (*((volatile unsigned long *)(it8152_base_address + 0x3f00800)))
++#define IT8152_PCI_CFG_DATA (*((volatile unsigned long *)(it8152_base_address + 0x3f00804)))
++
++#define IT_BUSNUM_SHF 16
++#define IT_DEVNUM_SHF 11
++#define IT_FUNCNUM_SHF 8
++#define IT_REGNUM_SHF 2
++
++/* Power management & PLL registers */
++#define IT8152_PMPLL_DSR IT8152_LONG_IO(0x00)
++#define IT8152_PMPLL_DSSR IT8152_LONG_IO(0x04)
++#define IT8152_PMPLL_PLLCR IT8152_LONG_IO(0x20)
++#define IT8152_PMPLL_MFSR IT8152_LONG_IO(0x24)
++
++/* Memory controller */
++#define IT8152_MC_REG_OFFSET 0x100
++
++#define IT8152_MC_SDCR IT8152_LONG_IO(IT8152_MC_REG_OFFSET + 0x00)
++#define IT8152_MC_PCICR IT8152_LONG_IO(IT8152_MC_REG_OFFSET + 0x04)
++
++/* Interrupt related definitions */
++#define IT8152_INTC_REG_OFFSET 0x300
++
++#define IT8152_INTC_LDCNIRR IT8152_LONG_IO(IT8152_INTC_REG_OFFSET + 0x00)
++#define IT8152_INTC_LDPNIRR IT8152_LONG_IO(IT8152_INTC_REG_OFFSET + 0x04)
++#define IT8152_INTC_LDCNIMR IT8152_LONG_IO(IT8152_INTC_REG_OFFSET + 0x08)
++#define IT8152_INTC_LDPNIMR IT8152_LONG_IO(IT8152_INTC_REG_OFFSET + 0x0C)
++#define IT8152_INTC_LDNITR IT8152_LONG_IO(IT8152_INTC_REG_OFFSET + 0x10)
++#define IT8152_INTC_LDNIAR IT8152_LONG_IO(IT8152_INTC_REG_OFFSET + 0x14)
++#define IT8152_INTC_LPCNIRR IT8152_LONG_IO(IT8152_INTC_REG_OFFSET + 0x20)
++#define IT8152_INTC_LPPNIRR IT8152_LONG_IO(IT8152_INTC_REG_OFFSET + 0x24)
++#define IT8152_INTC_LPCNIMR IT8152_LONG_IO(IT8152_INTC_REG_OFFSET + 0x28)
++#define IT8152_INTC_LPPNIMR IT8152_LONG_IO(IT8152_INTC_REG_OFFSET + 0x2C)
++#define IT8152_INTC_LPNITR IT8152_LONG_IO(IT8152_INTC_REG_OFFSET + 0x30)
++#define IT8152_INTC_LPNIAR IT8152_LONG_IO(IT8152_INTC_REG_OFFSET + 0x34)
++#define IT8152_INTC_PDCNIRR IT8152_LONG_IO(IT8152_INTC_REG_OFFSET + 0x40)
++#define IT8152_INTC_PDPNIRR IT8152_LONG_IO(IT8152_INTC_REG_OFFSET + 0x44)
++#define IT8152_INTC_PDCNIMR IT8152_LONG_IO(IT8152_INTC_REG_OFFSET + 0x48)
++#define IT8152_INTC_PDPNIMR IT8152_LONG_IO(IT8152_INTC_REG_OFFSET + 0x4C)
++#define IT8152_INTC_PDNITR IT8152_LONG_IO(IT8152_INTC_REG_OFFSET + 0x50)
++#define IT8152_INTC_PDNIAR IT8152_LONG_IO(IT8152_INTC_REG_OFFSET + 0x54)
++#define IT8152_INTC_INTC_TYPER IT8152_LONG_IO(IT8152_INTC_REG_OFFSET + 0xFC)
++
++#define IT8152_UART_BASE IT8152_LONG_IO(0x200)
++
++#define IT8152_GPIO_REG_OFFSET 0x500
++
++#define IT8152_GPIO_GPLR IT8152_LONG_IO(IT8152_GPIO_REG_OFFSET)
++#define IT8152_GPIO_GPCR12 IT8152_LONG_IO(IT8152_GPIO_REG_OFFSET + 0x04)
++#define IT8152_GPIO_GPCR34 IT8152_LONG_IO(IT8152_GPIO_REG_OFFSET + 0x08)
++
++
++/* Interrupt bit definitions */
++#define PCISERR_BIT (1<<14)
++#define H2PTADR_BIT (1<<13)
++#define H2PMAR_BIT (1<<12)
++#define PCI_INTD_BIT (1<<11)
++#define PCI_INTC_BIT (1<<10)
++#define PCI_INTB_BIT (1<<9)
++#define PCI_INTA_BIT (1<<8)
++#define CDMA_INT_BIT (1<<2)
++#define USB_INT_BIT (1<<1)
++#define AUDIO_INT_BIT (1<<0)
++
++/* IT8152 UART */
++#define ITESER_BIT (1<<5)
++
++
++
++
++
++
++
++
++
++
++
+diff --git a/include/asm-arm/pci.h b/include/asm-arm/pci.h
+index f21abd4..2cf30bf 100644
+--- a/include/asm-arm/pci.h
++++ b/include/asm-arm/pci.h
+@@ -8,10 +8,17 @@
+
+ #define pcibios_scan_all_fns(a, b) 0
+
++#ifdef CONFIG_PCI_HOST_ITE8152
++/* ITE bridge requires setting latency timer to avoid early bus access
++ termination by PIC bus mater devices
++*/
++extern void pcibios_set_master(struct pci_dev *dev);
++#else
+ static inline void pcibios_set_master(struct pci_dev *dev)
+ {
+ /* No special bus mastering setup handling */
+ }
++#endif
+
+ static inline void pcibios_penalize_isa_irq(int irq, int active)
+ {
+diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
+index 5b1c999..b4c81d5 100644
+--- a/include/linux/pci_ids.h
++++ b/include/linux/pci_ids.h
+@@ -1650,6 +1650,7 @@
+ #define PCI_DEVICE_ID_ITE_8211 0x8211
+ #define PCI_DEVICE_ID_ITE_8212 0x8212
+ #define PCI_DEVICE_ID_ITE_8213 0x8213
++#define PCI_DEVICE_ID_ITE_8152 0x8152
+ #define PCI_DEVICE_ID_ITE_8872 0x8872
+ #define PCI_DEVICE_ID_ITE_IT8330G_0 0xe886
+
+--
+1.5.1.6
+
diff --git a/recipes/linux/linux-2.6.22/cm-x270/0005-cm-x270-pcmcia.patch b/recipes/linux/linux-2.6.22/cm-x270/0005-cm-x270-pcmcia.patch
new file mode 100644
index 0000000000..7dceff5c9d
--- /dev/null
+++ b/recipes/linux/linux-2.6.22/cm-x270/0005-cm-x270-pcmcia.patch
@@ -0,0 +1,228 @@
+From 338653da8f8afcdf8afc7e8a5a0104d5083597cc Mon Sep 17 00:00:00 2001
+From: Cliff Brake <cbrake@happy.dev.bec-systems.com>
+Date: Fri, 20 Jul 2007 19:01:27 -0400
+Subject: [PATCH] cm-x270-pcmcia
+
+---
+ drivers/pcmcia/Makefile | 1 +
+ drivers/pcmcia/pxa2xx_cm_x270.c | 198 +++++++++++++++++++++++++++++++++++++++
+ 2 files changed, 199 insertions(+), 0 deletions(-)
+ create mode 100644 drivers/pcmcia/pxa2xx_cm_x270.c
+
+diff --git a/drivers/pcmcia/Makefile b/drivers/pcmcia/Makefile
+index 4276965..353d5b7 100644
+--- a/drivers/pcmcia/Makefile
++++ b/drivers/pcmcia/Makefile
+@@ -69,4 +69,5 @@ sa1100_cs-$(CONFIG_SA1100_SIMPAD) += sa1100_simpad.o
+ pxa2xx_cs-$(CONFIG_ARCH_LUBBOCK) += pxa2xx_lubbock.o sa1111_generic.o
+ pxa2xx_cs-$(CONFIG_MACH_MAINSTONE) += pxa2xx_mainstone.o
+ pxa2xx_cs-$(CONFIG_PXA_SHARPSL) += pxa2xx_sharpsl.o
++pxa2xx_cs-$(CONFIG_MACH_ARMCORE) += pxa2xx_cm_x270.o
+
+diff --git a/drivers/pcmcia/pxa2xx_cm_x270.c b/drivers/pcmcia/pxa2xx_cm_x270.c
+new file mode 100644
+index 0000000..25e369f
+--- /dev/null
++++ b/drivers/pcmcia/pxa2xx_cm_x270.c
+@@ -0,0 +1,198 @@
++/*
++ * linux/drivers/pcmcia/pxa/pxa_armcore.c
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ * Compulab Ltd., 2003
++ *
++ */
++
++#include <linux/kernel.h>
++#include <linux/sched.h>
++#include <linux/platform_device.h>
++#include <linux/irq.h>
++
++#include <pcmcia/ss.h>
++#include <asm/delay.h>
++#include <asm/hardware.h>
++
++#include <asm/arch/pxa-regs.h>
++#include <asm/arch/cm-x270.h>
++
++#include "soc_common.h"
++
++
++static struct pcmcia_irqs irqs[] = {
++ { 0, PCMCIA_S0_CD_VALID, "PCMCIA0 CD" },
++ { 1, PCMCIA_S1_CD_VALID, "PCMCIA1 CD" },
++};
++
++
++static int
++cmx270_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
++{
++ int return_val=0;
++
++ GPSR(GPIO48_nPOE) = GPIO_bit(GPIO48_nPOE) |
++ GPIO_bit(GPIO49_nPWE) |
++ GPIO_bit(GPIO50_nPIOR) |
++ GPIO_bit(GPIO51_nPIOW) |
++ GPIO_bit(GPIO85_nPCE_1) |
++ GPIO_bit(GPIO54_nPCE_2);
++
++ pxa_gpio_mode(GPIO48_nPOE_MD);
++ pxa_gpio_mode(GPIO49_nPWE_MD);
++ pxa_gpio_mode(GPIO50_nPIOR_MD);
++ pxa_gpio_mode(GPIO51_nPIOW_MD);
++ pxa_gpio_mode(GPIO85_nPCE_1_MD);
++ pxa_gpio_mode(GPIO54_nPCE_2_MD);
++ //pxa_gpio_mode(GPIO79_pSKTSEL_MD); /* REVISIT: s/b dependent on num sockets (on ATX base not routed)*/
++ pxa_gpio_mode(GPIO55_nPREG_MD);
++ pxa_gpio_mode(GPIO56_nPWAIT_MD);
++ pxa_gpio_mode(GPIO57_nIOIS16_MD);
++
++ // Reset signal
++ GPDR(GPIO53_nPCE_2) |= GPIO_bit(GPIO53_nPCE_2);
++ GPCR(GPIO53_nPCE_2) = GPIO_bit(GPIO53_nPCE_2);
++
++ GPDR(IRQ_TO_GPIO(PCMCIA_S0_CD_VALID)) &= ~GPIO_bit(IRQ_TO_GPIO(PCMCIA_S0_CD_VALID));
++ GPDR(IRQ_TO_GPIO(PCMCIA_S1_CD_VALID)) &= ~GPIO_bit(IRQ_TO_GPIO(PCMCIA_S1_CD_VALID));
++
++ set_irq_type(PCMCIA_S0_CD_VALID, IRQ_TYPE_EDGE_BOTH);
++ set_irq_type(PCMCIA_S1_CD_VALID, IRQ_TYPE_EDGE_BOTH);
++
++ //irq's for slots:
++ GPDR(IRQ_TO_GPIO(PCMCIA_S0_RDYINT)) &= ~GPIO_bit(IRQ_TO_GPIO(PCMCIA_S0_RDYINT));
++ GPDR(IRQ_TO_GPIO(PCMCIA_S1_RDYINT)) &= ~GPIO_bit(IRQ_TO_GPIO(PCMCIA_S1_RDYINT));
++
++ set_irq_type(PCMCIA_S0_RDYINT, IRQ_TYPE_EDGE_FALLING);
++ set_irq_type(PCMCIA_S1_RDYINT, IRQ_TYPE_EDGE_FALLING);
++
++ skt->irq = (skt->nr == 0) ? PCMCIA_S0_RDYINT : PCMCIA_S1_RDYINT;
++ return_val = soc_pcmcia_request_irqs(skt, irqs, ARRAY_SIZE(irqs));
++
++ return return_val;
++}
++
++
++static void cmx270_pcmcia_shutdown(struct soc_pcmcia_socket *skt)
++{
++ soc_pcmcia_free_irqs(skt, irqs, ARRAY_SIZE(irqs));
++
++ set_irq_type(IRQ_TO_GPIO(PCMCIA_S0_CD_VALID), IRQ_TYPE_NONE);
++ set_irq_type(IRQ_TO_GPIO(PCMCIA_S1_CD_VALID), IRQ_TYPE_NONE);
++
++ set_irq_type(IRQ_TO_GPIO(PCMCIA_S0_RDYINT), IRQ_TYPE_NONE);
++ set_irq_type(IRQ_TO_GPIO(PCMCIA_S1_RDYINT), IRQ_TYPE_NONE);
++}
++
++
++static void cmx270_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
++ struct pcmcia_state *state)
++{
++
++ state->detect = (PCC_DETECT(skt->nr) == 0) ? 1 : 0;
++ state->ready = (PCC_READY(skt->nr) == 0) ? 0 : 1;
++ state->bvd1 = 1;
++ state->bvd2 = 1;
++ state->vs_3v = 0;
++ state->vs_Xv = 0;
++ state->wrprot = 0; /* not available */
++
++}
++
++
++static int
++cmx270_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
++ const socket_state_t *state)
++{
++
++ GPSR(GPIO49_nPWE) = GPIO_bit(GPIO49_nPWE);
++ pxa_gpio_mode(GPIO49_nPWE | GPIO_OUT);
++ //pxa_gpio_mode(GPIO79_pSKTSEL_MD | GPIO_OUT); /* For 2-socket mode */
++
++ switch(skt->nr){
++ case 0:
++ if(state->flags & SS_RESET) {
++ //GPCR(GPIO79_pSKTSEL) = GPIO_bit(GPIO79_pSKTSEL); /* For 2-socket mode */
++ //udelay(1);
++ GPCR(GPIO49_nPWE) = GPIO_bit(GPIO49_nPWE);
++ GPSR(GPIO53_nPCE_2) = GPIO_bit(GPIO53_nPCE_2);
++ udelay(10);
++ GPCR(GPIO53_nPCE_2) = GPIO_bit(GPIO53_nPCE_2);
++ GPSR(GPIO49_nPWE) = GPIO_bit(GPIO49_nPWE);
++ }
++ break;
++ case 1:
++ if(state->flags & SS_RESET) {
++ //GPCR(GPIO79_pSKTSEL) = GPIO_bit(GPIO79_pSKTSEL); /* For 2-socket mode */
++ //udelay(1);
++ GPCR(GPIO49_nPWE) = GPIO_bit(GPIO49_nPWE);
++ GPSR(GPIO53_nPCE_2) = GPIO_bit(GPIO53_nPCE_2);
++ udelay(10);
++ GPCR(GPIO53_nPCE_2) = GPIO_bit(GPIO53_nPCE_2);
++ GPSR(GPIO49_nPWE) = GPIO_bit(GPIO49_nPWE);
++ }
++ break;
++ }
++
++ pxa_gpio_mode(GPIO49_nPWE_MD);
++ //pxa_gpio_mode(GPIO79_pSKTSEL_MD); /* For 2-socket mode */
++
++
++ return 0;
++}
++
++static void cmx270_pcmcia_socket_init(struct soc_pcmcia_socket *skt)
++{
++}
++
++static void cmx270_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt)
++{
++}
++
++
++static struct pcmcia_low_level cmx270_pcmcia_ops = {
++ .owner = THIS_MODULE,
++ .hw_init = cmx270_pcmcia_hw_init,
++ .hw_shutdown = cmx270_pcmcia_shutdown,
++ .socket_state = cmx270_pcmcia_socket_state,
++ .configure_socket = cmx270_pcmcia_configure_socket,
++ .socket_init = cmx270_pcmcia_socket_init,
++ .socket_suspend = cmx270_pcmcia_socket_suspend,
++ .nr = 2,
++};
++
++static struct platform_device *cmx270_pcmcia_device;
++
++static int __init cmx270_pcmcia_init(void)
++{
++ int ret;
++
++ cmx270_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1);
++
++ if (!cmx270_pcmcia_device)
++ return -ENOMEM;
++
++ cmx270_pcmcia_device->dev.platform_data = &cmx270_pcmcia_ops;
++
++ printk ("Registering cm-x270 PCMCIA interface.\n");
++ ret = platform_device_add(cmx270_pcmcia_device);
++
++ if (ret)
++ platform_device_put(cmx270_pcmcia_device);
++
++ return ret;
++}
++
++static void __exit cmx270_pcmcia_exit(void)
++{
++ platform_device_unregister(cmx270_pcmcia_device);
++}
++
++module_init(cmx270_pcmcia_init);
++module_exit(cmx270_pcmcia_exit);
++
++MODULE_LICENSE("GPL");
+--
+1.5.1.6
+
diff --git a/recipes/linux/linux-2.6.22/cm-x270/0006-ramdisk_load.patch b/recipes/linux/linux-2.6.22/cm-x270/0006-ramdisk_load.patch
new file mode 100644
index 0000000000..aa25dd9bfc
--- /dev/null
+++ b/recipes/linux/linux-2.6.22/cm-x270/0006-ramdisk_load.patch
@@ -0,0 +1,80 @@
+From ca4508b1266109208f62e986b51397ce2788e255 Mon Sep 17 00:00:00 2001
+From: Cliff Brake <cbrake@happy.dev.bec-systems.com>
+Date: Fri, 20 Jul 2007 19:01:50 -0400
+Subject: [PATCH] ramdisk_load
+
+---
+ arch/arm/mach-pxa/cm-x270.c | 6 ++++++
+ include/asm-arm/arch-pxa/cm-x270.h | 2 ++
+ init/initramfs.c | 16 ++++++++++++++++
+ 3 files changed, 24 insertions(+), 0 deletions(-)
+
+diff --git a/arch/arm/mach-pxa/cm-x270.c b/arch/arm/mach-pxa/cm-x270.c
+index 88b080d..c6ec489 100644
+--- a/arch/arm/mach-pxa/cm-x270.c
++++ b/arch/arm/mach-pxa/cm-x270.c
+@@ -308,6 +308,12 @@ static struct map_desc cmx270_io_desc[] __initdata = {
+ .length = PXA_CS_SIZE,
+ .type = MT_DEVICE
+ },
++ [2] = { /* NOR flash */
++ .virtual = CMX270_FLASH_VIRT,
++ .pfn = __phys_to_pfn(PXA_CS0_PHYS),
++ .length = (8<<20), /* up to 8 MByte flash */
++ .type = MT_DEVICE
++ },
+ };
+
+ /*
+diff --git a/include/asm-arm/arch-pxa/cm-x270.h b/include/asm-arm/arch-pxa/cm-x270.h
+index 24613a5..aad152e 100644
+--- a/include/asm-arm/arch-pxa/cm-x270.h
++++ b/include/asm-arm/arch-pxa/cm-x270.h
+@@ -20,7 +20,9 @@
+
+ #define CMX270_IT8152_VIRT (CMX270_VIRT_BASE)
+ #define CMX270_IDE104_VIRT (CMX270_IT8152_VIRT + PXA_CS_SIZE)
++#define CMX270_FLASH_VIRT (CMX270_IDE104_VIRT + PXA_CS_SIZE)
+
++#define CMX270_FLASH_RAMDISK_VIRT (CMX270_FLASH_VIRT + 0x1c0000)
+
+ /* GPIO related definitions */
+ #define GPIO_IT8152_IRQ (22)
+diff --git a/init/initramfs.c b/init/initramfs.c
+index 00eff7a..0ecd40b 100644
+--- a/init/initramfs.c
++++ b/init/initramfs.c
+@@ -7,6 +7,9 @@
+ #include <linux/string.h>
+ #include <linux/syscalls.h>
+
++// HACK for compulab cm-x270
++#include <asm/arch/cm-x270.h>
++
+ static __initdata char *message;
+ static void __init error(char *x)
+ {
+@@ -550,7 +553,20 @@ static int __init populate_rootfs(void)
+ #ifdef CONFIG_BLK_DEV_INITRD
+ if (initrd_start) {
+ #ifdef CONFIG_BLK_DEV_RAM
++
++ /* hack to make initramfs work because the
++ * compulab BL does not zero out the
++ * initrd memory. This only seems to affect loading
++ * initramfs (cpio.gz) archives. Does not seem to
++ * affect ramdisks.
++ */
++ int initrd_size = *(int *)(CMX270_FLASH_RAMDISK_VIRT);
+ int fd;
++
++ initrd_end = initrd_start + initrd_size;
++ //printk("CLIFF: initrd_start = 0x%x\n", initrd_start);
++ //printk("CLIFF: initrd_end = 0x%x\n", initrd_end);
++
+ printk(KERN_INFO "checking if image is initramfs...");
+ err = unpack_to_rootfs((char *)initrd_start,
+ initrd_end - initrd_start, 1);
+--
+1.5.1.6
+
diff --git a/recipes/linux/linux-2.6.22/cm-x270/0007-mmcsd_large_cards-r0.patch b/recipes/linux/linux-2.6.22/cm-x270/0007-mmcsd_large_cards-r0.patch
new file mode 100644
index 0000000000..90e66b5308
--- /dev/null
+++ b/recipes/linux/linux-2.6.22/cm-x270/0007-mmcsd_large_cards-r0.patch
@@ -0,0 +1,36 @@
+From 26638b93f7479dc597a58e2e2b2832c6ff4c8f7b Mon Sep 17 00:00:00 2001
+From: Cliff Brake <cbrake@happy.dev.bec-systems.com>
+Date: Fri, 20 Jul 2007 19:02:55 -0400
+Subject: [PATCH] mmcsd_large_cards-r0
+
+---
+ drivers/mmc/card/block.c | 6 ++++++
+ 1 files changed, 6 insertions(+), 0 deletions(-)
+
+diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c
+index 540ff4b..1f8d67d 100644
+--- a/drivers/mmc/card/block.c
++++ b/drivers/mmc/card/block.c
+@@ -403,6 +403,7 @@ static struct mmc_blk_data *mmc_blk_alloc(struct mmc_card *card)
+ {
+ struct mmc_blk_data *md;
+ int devidx, ret;
++ unsigned long cap;
+
+ devidx = find_first_zero_bit(dev_use, MMC_NUM_MINORS);
+ if (devidx >= MMC_NUM_MINORS)
+@@ -467,6 +468,11 @@ static struct mmc_blk_data *mmc_blk_alloc(struct mmc_card *card)
+
+ sprintf(md->disk->disk_name, "mmcblk%d", devidx);
+
++ if (card->csd.read_blkbits > 9)
++ md->block_bits = 9;
++ else
++ md->block_bits = card->csd.read_blkbits;
++
+ blk_queue_hardsect_size(md->queue.queue, 1 << md->block_bits);
+
+ if (!mmc_card_sd(card) && mmc_card_blockaddr(card)) {
+--
+1.5.1.6
+
diff --git a/recipes/linux/linux-2.6.22/cm-x270/0008-cm-x270-nand-simplify-name.patch b/recipes/linux/linux-2.6.22/cm-x270/0008-cm-x270-nand-simplify-name.patch
new file mode 100644
index 0000000000..c07f049e56
--- /dev/null
+++ b/recipes/linux/linux-2.6.22/cm-x270/0008-cm-x270-nand-simplify-name.patch
@@ -0,0 +1,25 @@
+From e1a243564a40d7542a62d4684f2e6ce0b95fa267 Mon Sep 17 00:00:00 2001
+From: Cliff Brake <cbrake@happy.dev.bec-systems.com>
+Date: Fri, 20 Jul 2007 19:04:12 -0400
+Subject: [PATCH] cm-x270-nand-simplify-name
+
+---
+ drivers/mtd/nand/cmx270_nand.c | 2 ++
+ 1 files changed, 2 insertions(+), 0 deletions(-)
+
+diff --git a/drivers/mtd/nand/cmx270_nand.c b/drivers/mtd/nand/cmx270_nand.c
+index cb663ef..3654ce4 100644
+--- a/drivers/mtd/nand/cmx270_nand.c
++++ b/drivers/mtd/nand/cmx270_nand.c
+@@ -191,6 +191,8 @@ static int cmx270_init(void)
+ cmx270_nand_mtd->owner = THIS_MODULE;
+ cmx270_nand_mtd->priv = this;
+
++ cmx270_nand_mtd->name = "cm-x270-nand";
++
+ /* insert callbacks */
+ this->IO_ADDR_R = cmx270_nand_io;
+ this->IO_ADDR_W = cmx270_nand_io;
+--
+1.5.1.6
+
diff --git a/recipes/linux/linux-2.6.22/cm-x270/0009-cursor-fix.patch b/recipes/linux/linux-2.6.22/cm-x270/0009-cursor-fix.patch
new file mode 100644
index 0000000000..08b0db36b0
--- /dev/null
+++ b/recipes/linux/linux-2.6.22/cm-x270/0009-cursor-fix.patch
@@ -0,0 +1,43 @@
+From 94a59c25e4e0aec3c4d12e0c63e144e6af447368 Mon Sep 17 00:00:00 2001
+From: Cliff Brake <cbrake@happy.dev.bec-systems.com>
+Date: Fri, 20 Jul 2007 19:04:42 -0400
+Subject: [PATCH] cursor-fix
+
+---
+ drivers/char/vt.c | 4 ++--
+ drivers/char/vt_ioctl.c | 4 ++--
+ 2 files changed, 4 insertions(+), 4 deletions(-)
+
+diff --git a/drivers/char/vt.c b/drivers/char/vt.c
+index 6650ae1..649474e 100644
+--- a/drivers/char/vt.c
++++ b/drivers/char/vt.c
+@@ -3491,8 +3491,8 @@ void do_blank_screen(int entering_gfx)
+ }
+ return;
+ }
+- if (blank_state != blank_normal_wait)
+- return;
++ //if (blank_state != blank_normal_wait)
++ // return;
+ blank_state = blank_off;
+
+ /* entering graphics mode? */
+diff --git a/drivers/char/vt_ioctl.c b/drivers/char/vt_ioctl.c
+index c6f6f42..94121ff 100644
+--- a/drivers/char/vt_ioctl.c
++++ b/drivers/char/vt_ioctl.c
+@@ -489,8 +489,8 @@ int vt_ioctl(struct tty_struct *tty, struct file * file,
+ if (vc->vc_mode == (unsigned char) arg)
+ return 0;
+ vc->vc_mode = (unsigned char) arg;
+- if (console != fg_console)
+- return 0;
++ //if (console != fg_console)
++ // return 0;
+ /*
+ * explicitly blank/unblank the screen if switching modes
+ */
+--
+1.5.1.6
+
diff --git a/recipes/linux/linux-2.6.22/cm-x270/defconfig b/recipes/linux/linux-2.6.22/cm-x270/defconfig
new file mode 100644
index 0000000000..63bc69533f
--- /dev/null
+++ b/recipes/linux/linux-2.6.22/cm-x270/defconfig
@@ -0,0 +1,1234 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.22
+# Tue Aug 7 15:22:23 2007
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+# CONFIG_GENERIC_CLOCKEVENTS is not set
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION="-cm-x270"
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_PNX4008 is not set
+CONFIG_ARCH_PXA=y
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+
+#
+# Intel PXA2xx Implementations
+#
+# CONFIG_ARCH_LUBBOCK is not set
+# CONFIG_MACH_LOGICPD_PXA270 is not set
+# CONFIG_MACH_MAINSTONE is not set
+# CONFIG_ARCH_PXA_IDP is not set
+# CONFIG_PXA_SHARPSL is not set
+# CONFIG_MACH_TRIZEPS4 is not set
+CONFIG_MACH_ARMCORE=y
+CONFIG_PXA27x=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_XSCALE=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_OUTER_CACHE is not set
+CONFIG_IWMMXT=y
+CONFIG_XSCALE_PMU=y
+
+#
+# Bus support
+#
+# CONFIG_PCI is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_TICK_ONESHOT is not set
+CONFIG_PREEMPT=y
+CONFIG_NO_IDLE_HZ=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=ttyS1,38400 monitor=8 bpp=16 mem=64M mtdparts=physmap-flash.0:256k(boot)ro,0x180000(kernel),-(root);cm-x270-nand:64m(app),-(data) rdinit=/sbin/init root=mtd3 rootfstype=jffs2"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_XIP is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x0
+CONFIG_MTD_PHYSMAP_LEN=0x400000
+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_SHARP_SL is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_H1900 is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_SHARPSL is not set
+CONFIG_MTD_NAND_CM_X270=y
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+# CONFIG_PNPACPI is not set
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_ATA is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_SMC91X is not set
+CONFIG_DM9000=y
+CONFIG_DM9000_NOEPROM=y
+# CONFIG_SMC911X is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# USB Network Adapters
+#
+CONFIG_USB_CATC=m
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_USBNET_MII=m
+CONFIG_USB_USBNET=m
+CONFIG_USB_NET_AX8817X=m
+CONFIG_USB_NET_CDCETHER=m
+# CONFIG_USB_NET_DM9601 is not set
+CONFIG_USB_NET_GL620A=m
+CONFIG_USB_NET_NET1080=m
+CONFIG_USB_NET_PLUSB=m
+CONFIG_USB_NET_MCS7830=m
+# CONFIG_USB_NET_RNDIS_HOST is not set
+# CONFIG_USB_NET_CDC_SUBSET is not set
+# CONFIG_USB_NET_ZAURUS is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+CONFIG_INPUT_EVDEV=m
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_PXA27x is not set
+# CONFIG_KEYBOARD_GPIO is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+# CONFIG_MOUSE_PS2_ALPS is not set
+# CONFIG_MOUSE_PS2_LOGIPS2PP is not set
+# CONFIG_MOUSE_PS2_SYNAPTICS is not set
+# CONFIG_MOUSE_PS2_LIFEBOOK is not set
+# CONFIG_MOUSE_PS2_TRACKPOINT is not set
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+CONFIG_TOUCHSCREEN_UCB1400=m
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_PXA=y
+CONFIG_SERIAL_PXA_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=m
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=m
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_GPIO is not set
+CONFIG_I2C_PXA=m
+# CONFIG_I2C_PXA_SLAVE is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Misc devices
+#
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# LED devices
+#
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+CONFIG_LEDS_CM_X270=y
+
+#
+# LED Triggers
+#
+# CONFIG_LEDS_TRIGGERS is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_PXA=y
+CONFIG_FB_PXA_PARAMETERS=y
+# CONFIG_FB_MBX is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_LOGO is not set
+
+#
+# Sound
+#
+CONFIG_SOUND=m
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+# CONFIG_SND_SEQUENCER is not set
+# CONFIG_SND_MIXER_OSS is not set
+# CONFIG_SND_PCM_OSS is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+CONFIG_SND_AC97_CODEC=m
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# ALSA ARM devices
+#
+CONFIG_SND_PXA2XX_PCM=m
+CONFIG_SND_PXA2XX_AC97=m
+
+#
+# USB devices
+#
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_CAIAQ is not set
+
+#
+# System on Chip audio support
+#
+# CONFIG_SND_SOC is not set
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=m
+
+#
+# HID Devices
+#
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+CONFIG_MMC=m
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=m
+
+#
+# MMC/SD Host Controller Drivers
+#
+CONFIG_MMC_PXA=m
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+# CONFIG_NFS_FS is not set
+# CONFIG_NFSD is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y