diff options
Diffstat (limited to 'packages')
39 files changed, 21168 insertions, 61 deletions
diff --git a/packages/docbook-sgml-dtd/docbook-sgml-dtd-3.1-native.bb b/packages/docbook-sgml-dtd/docbook-sgml-dtd-3.1-native.bb new file mode 100644 index 0000000000..4b0e4629b8 --- /dev/null +++ b/packages/docbook-sgml-dtd/docbook-sgml-dtd-3.1-native.bb @@ -0,0 +1,12 @@ +require docbook-sgml-dtd-native.inc + +DTD_VERSION = "3.1" + +SRC_URI = "http://www.docbook.org/sgml/3.1/docbk31.zip;md5sum=432749c0c806dbae81c8bcb70da3b5d3" + +do_compile() { + # Refer to http://www.linuxfromscratch.org/blfs/view/stable/pst/sgml-dtd-3.html + # for details. + sed -i -e '/ISO 8879/d' -e 's|DTDDECL "-//OASIS//DTD DocBook V3.1//EN"|SGMLDECL|g' docbook.cat +} + diff --git a/packages/docbook-sgml-dtd/docbook-sgml-dtd-4.1-native.bb b/packages/docbook-sgml-dtd/docbook-sgml-dtd-4.1-native.bb new file mode 100644 index 0000000000..bd75d6ad68 --- /dev/null +++ b/packages/docbook-sgml-dtd/docbook-sgml-dtd-4.1-native.bb @@ -0,0 +1,12 @@ +require docbook-sgml-dtd-native.inc + +DTD_VERSION = "4.1" + +SRC_URI = "http://docbook.org/sgml/4.1/docbk41.zip" + +do_compile() { + # Refer to http://www.linuxfromscratch.org/blfs/view/stable/pst/sgml-dtd.html + # for details. + sed -i -e '/ISO 8879/d' -e '/gml/d' docbook.cat +} + diff --git a/packages/docbook-sgml-dtd/docbook-sgml-dtd-4.4-native.bb b/packages/docbook-sgml-dtd/docbook-sgml-dtd-4.4-native.bb new file mode 100644 index 0000000000..4ff48b7940 --- /dev/null +++ b/packages/docbook-sgml-dtd/docbook-sgml-dtd-4.4-native.bb @@ -0,0 +1,10 @@ +require docbook-sgml-dtd-native.inc + +DTD_VERSION = "4.4" + +do_compile() { + # Refer to http://www.linuxfromscratch.org/blfs/view/stable/pst/sgml-dtd.html + # for details. + sed -i -e '/ISO 8879/d' -e '/gml/d' docbook.cat +} + diff --git a/packages/docbook-sgml-dtd/docbook-sgml-dtd-native_3.1.bb b/packages/docbook-sgml-dtd/docbook-sgml-dtd-native.inc index 926c311fd5..69c9811d8a 100644 --- a/packages/docbook-sgml-dtd/docbook-sgml-dtd-native_3.1.bb +++ b/packages/docbook-sgml-dtd/docbook-sgml-dtd-native.inc @@ -1,29 +1,31 @@ +# The DTDs of the various versions have to be installed in parallel and should +# not replace each other. The installation step is common for all versions +# and just differs in the DTD_VERSION. +# +# However the DTDs need some quirks (see LFS documentation). + DESCRIPTION = "Document type definitions for verification of SGML data files against the DocBook rule set" DEPENDS = "sgml-common-native" -SRC_URI = "http://www.docbook.org/sgml/${PV}/docbk31.zip" +SRC_URI = "http://www.docbook.org/sgml/${DTD_VERSION}/docbook-${DTD_VERSION}.zip" S = "${WORKDIR}" inherit native -do_compile() { - sed -i -e '/ISO 8879/d' -e 's|DTDDECL "-//OASIS//DTD DocBook V3.1//EN"|SGMLDECL|g' docbook.cat -} - do_stage () { - # Refer to http://www.linuxfromscratch.org/blfs/view/stable/pst/sgml-dtd-3.html + # Refer to http://www.linuxfromscratch.org/blfs/view/stable/pst/sgml-dtd.html # for details. - install -d -m 755 ${STAGING_DATADIR}/sgml/docbook/sgml-dtd-${PV} - install docbook.cat ${STAGING_DATADIR}/sgml/docbook/sgml-dtd-${PV}/catalog - cp -dpr *.dtd *.mod *.dcl ${STAGING_DATADIR}/sgml/docbook/sgml-dtd-${PV} + install -d -m 755 ${STAGING_DATADIR}/sgml/docbook/sgml-dtd-${DTD_VERSION} + install docbook.cat ${STAGING_DATADIR}/sgml/docbook/sgml-dtd-${DTD_VERSION}/catalog + cp -dpr *.dtd *.mod *.dcl ${STAGING_DATADIR}/sgml/docbook/sgml-dtd-${DTD_VERSION} - install-catalog --add ${sysconfdir}/sgml/sgml-docbook-dtd-${PV}.cat \ - ${STAGING_DATADIR}/sgml/docbook/sgml-dtd-${PV}/catalog + install-catalog --add ${sysconfdir}/sgml/sgml-docbook-dtd-${DTD_VERSION}.cat \ + ${STAGING_DATADIR}/sgml/docbook/sgml-dtd-${DTD_VERSION}/catalog - install-catalog --add ${sysconfdir}/sgml/sgml-docbook-dtd-${PV}.cat \ - ${sysconfdir}/sgml/sgml-docbook.cat + install-catalog --add ${sysconfdir}/sgml/sgml-docbook-dtd-${DTD_VERSION}.cat \ + ${sysconfdir}/sgml/sgml-docbook.cat } PACKAGES = "" diff --git a/packages/docbook-utils/docbook-utils-native_0.6.14.bb b/packages/docbook-utils/docbook-utils-native_0.6.14.bb index 9f7af1d683..af1113b331 100644 --- a/packages/docbook-utils/docbook-utils-native_0.6.14.bb +++ b/packages/docbook-utils/docbook-utils-native_0.6.14.bb @@ -1,6 +1,9 @@ SECTION = "console/utils" LICENSE = "GPL" -DEPENDS = "openjade-native docbook-sgml-dtd-native docbook-dsssl-stylesheets-native" + +PR = "r1" + +DEPENDS = "openjade-native sgmlspl-native docbook-dsssl-stylesheets-native docbook-sgml-dtd-3.1-native" SRC_URI = "ftp://sources.redhat.com/pub/docbook-tools/new-trials/SOURCES/docbook-utils-${PV}.tar.gz" S = "${WORKDIR}/docbook-utils-${PV}" diff --git a/packages/speechd/.mtn2git_empty b/packages/dotconf/.mtn2git_empty index e69de29bb2..e69de29bb2 100644 --- a/packages/speechd/.mtn2git_empty +++ b/packages/dotconf/.mtn2git_empty diff --git a/packages/dotconf/dotconf_1.0.13.bb b/packages/dotconf/dotconf_1.0.13.bb new file mode 100644 index 0000000000..332cba9bfa --- /dev/null +++ b/packages/dotconf/dotconf_1.0.13.bb @@ -0,0 +1,15 @@ +DESCRIPTION = " dot.conf is an easy to use and powerful configuration file parser library" +HOMEPAGE = "http://www.azzit.de/dotconf/" +LICENSE = "LGPLv2" + +PR = "r0" + +inherit autotools + +SRC_URI = "http://www.azzit.de/dotconf/download/v1.0/${PN}-${PV}.tar.gz \ + file://srcMakefile.am_00.patch;patch=1" + +do_stage () { + install -m 0644 ${S}/src/*.h ${STAGING_INCDIR}/ + oe_libinstall -C src -a -so libdotconf ${STAGING_LIBDIR}/ +} diff --git a/packages/dotconf/files/.mtn2git_empty b/packages/dotconf/files/.mtn2git_empty new file mode 100644 index 0000000000..e69de29bb2 --- /dev/null +++ b/packages/dotconf/files/.mtn2git_empty diff --git a/packages/dotconf/files/srcMakefile.am_00.patch b/packages/dotconf/files/srcMakefile.am_00.patch new file mode 100644 index 0000000000..500f1fd2d7 --- /dev/null +++ b/packages/dotconf/files/srcMakefile.am_00.patch @@ -0,0 +1,9 @@ +--- dotconf-1.0.13/src/Makefile.am.orig 2008-01-02 11:48:16.000000000 +0000 ++++ dotconf-1.0.13/src/Makefile.am 2008-01-02 11:48:22.000000000 +0000 +@@ -1,5 +1,5 @@ + +-INCLUDES = -I. -I$(includedir) ++INCLUDES = -I. + + include_HEADERS = dotconf.h + noinst_HEADERS = readdir.h diff --git a/packages/gpsd/gpsd-2.35/.mtn2git_empty b/packages/gpsd/gpsd-2.35/.mtn2git_empty new file mode 100644 index 0000000000..e69de29bb2 --- /dev/null +++ b/packages/gpsd/gpsd-2.35/.mtn2git_empty diff --git a/packages/gpsd/gpsd-2.35/gpsd_dbus.patch b/packages/gpsd/gpsd-2.35/gpsd_dbus.patch new file mode 100644 index 0000000000..215b0ecce9 --- /dev/null +++ b/packages/gpsd/gpsd-2.35/gpsd_dbus.patch @@ -0,0 +1,11 @@ +--- gpsd-2.35/gpsd_dbus.h.old 2008-01-02 20:54:33.000000000 -0600 ++++ gpsd-2.35/gpsd_dbus.h 2008-01-02 20:55:35.000000000 -0600 +@@ -6,6 +6,8 @@ + + #include <dbus/dbus.h> + ++#include "gpsd.h" ++ + int initialize_dbus_connection (void); + void send_dbus_fix (struct gps_device_t* channel); + diff --git a/packages/gpsd/gpsd_2.35.bb b/packages/gpsd/gpsd_2.35.bb new file mode 100644 index 0000000000..fcc5c76070 --- /dev/null +++ b/packages/gpsd/gpsd_2.35.bb @@ -0,0 +1,8 @@ +require gpsd.inc + +SRC_URI = "http://download.berlios.de/gpsd/gpsd-${PV}.tar.gz \ + file://gpsd-default \ + file://gpsd \ + file://gpsd_dbus.patch;patch=1 " + +PR = "r0" diff --git a/packages/linux/linux-2.6.23+2.6.24-rc5/gesbc-9302/.mtn2git_empty b/packages/linux/linux-2.6.23+2.6.24-rc5/gesbc-9302/.mtn2git_empty new file mode 100644 index 0000000000..e69de29bb2 --- /dev/null +++ b/packages/linux/linux-2.6.23+2.6.24-rc5/gesbc-9302/.mtn2git_empty diff --git a/packages/linux/linux-2.6.23+2.6.24-rc5/gesbc-9302/0001-gesbc-nand.patch b/packages/linux/linux-2.6.23+2.6.24-rc5/gesbc-9302/0001-gesbc-nand.patch new file mode 100644 index 0000000000..0f5e909148 --- /dev/null +++ b/packages/linux/linux-2.6.23+2.6.24-rc5/gesbc-9302/0001-gesbc-nand.patch @@ -0,0 +1,306 @@ +From 9819226a16a12ba0545e90b475fa70d408544971 Mon Sep 17 00:00:00 2001 +From: Cliff Brake <cbrake@happy.(none)> +Date: Mon, 17 Dec 2007 16:45:47 -0500 +Subject: [PATCH] gesbc-nand + +--- + drivers/mtd/nand/Kconfig | 7 ++ + drivers/mtd/nand/Makefile | 1 + + drivers/mtd/nand/gesbc.c | 255 +++++++++++++++++++++++++++++++++++++++++++++ + 3 files changed, 263 insertions(+), 0 deletions(-) + create mode 100644 drivers/mtd/nand/gesbc.c + +diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig +index 246d451..cde3146 100644 +--- a/drivers/mtd/nand/Kconfig ++++ b/drivers/mtd/nand/Kconfig +@@ -51,6 +51,13 @@ config MTD_NAND_EDB7312 + This enables the driver for the Cirrus Logic EBD7312 evaluation + board to access the onboard NAND Flash. + ++config MTD_NAND_GESBC ++ tristate "Support for Glomation GESBC-93xx board" ++ depends on MTD_NAND && MACH_EDB9302 ++ help ++ This enables the driver for the Glomation GESBC-93xx ++ board to access the onboard NAND Flash. ++ + config MTD_NAND_H1900 + tristate "iPAQ H1900 flash" + depends on ARCH_PXA && MTD_PARTITIONS +diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile +index 3ad6c01..58c1961 100644 +--- a/drivers/mtd/nand/Makefile ++++ b/drivers/mtd/nand/Makefile +@@ -12,6 +12,7 @@ obj-$(CONFIG_MTD_NAND_AMS_DELTA) += ams-delta.o + obj-$(CONFIG_MTD_NAND_TOTO) += toto.o + obj-$(CONFIG_MTD_NAND_AUTCPU12) += autcpu12.o + obj-$(CONFIG_MTD_NAND_EDB7312) += edb7312.o ++obj-$(CONFIG_MTD_NAND_GESBC) += gesbc.o + obj-$(CONFIG_MTD_NAND_AU1550) += au1550nd.o + obj-$(CONFIG_MTD_NAND_BF5XX) += bf5xx_nand.o + obj-$(CONFIG_MTD_NAND_PPCHAMELEONEVB) += ppchameleonevb.o +diff --git a/drivers/mtd/nand/gesbc.c b/drivers/mtd/nand/gesbc.c +new file mode 100644 +index 0000000..a5844b1 +--- /dev/null ++++ b/drivers/mtd/nand/gesbc.c +@@ -0,0 +1,255 @@ ++/* ++ * drivers/mtd/nand/gesbc-9302.c ++ * ++ * Copyright (C) 2004 Glomation (support@glomationinc.com) ++ * ++ * Derived from drivers/mtd/nand/edb7312.c ++ * Copyright (C) 2004 Marius Grer (mag@sysgo.de) ++ * ++ * Derived from drivers/mtd/nand/autcpu12.c ++ * Copyright (c) 2001 Thomas Gleixner (gleixner@autronix.de) ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ * Overview: ++ * This is a device driver for the NAND flash device found on the ++ * GESBC-93xx board with Samsung 128/256/512 Mbyte part. ++ */ ++ ++#include <linux/slab.h> ++#include <linux/module.h> ++#include <linux/init.h> ++#include <linux/mtd/mtd.h> ++#include <linux/mtd/nand.h> ++#include <linux/mtd/partitions.h> ++#include <asm/io.h> ++#include <asm/arch/hardware.h> ++#include <asm/sizes.h> ++ ++#define GESBC_NAND_FLASH_DATA 0x10000000 ++ ++#define GPIO_PADR EP93XX_GPIO_REG(0x0) ++#define GPIO_PADDR EP93XX_GPIO_REG(0x10) ++#define SMCBCR1 (EP93XX_AHB_VIRT_BASE + 0x00082000 + 0x04) ++ ++/* ++ * MTD structure for GESBC-93xx board ++ */ ++static struct mtd_info *gesbc_mtd = NULL; ++ ++ ++/* ++ * Module stuff ++ */ ++static unsigned long gesbc_fio_pbase = GESBC_NAND_FLASH_DATA; ++ ++#ifdef CONFIG_MTD_PARTITIONS ++/* ++ * Define static partitions for flash device ++ */ ++static struct mtd_partition partition_info32[] = { ++ { .name= "GESBC NAND FLASH", ++ .offset= 0, ++ .size= 128*1024*1024 }, ++}; ++/* ++ * Define static partitions for flash device ++ */ ++static struct mtd_partition partition_info128[] = { ++ { .name= "GESBC NAND FLASH", ++ .offset= 0, ++ .size= 128*1024*1024 }, ++}; ++ ++/* ++ * Define static partitions for flash device ++ */ ++static struct mtd_partition partition_info256[] = { ++ { .name= "GESBC NAND FLASH", ++ .offset= 0, ++ .size= 256*1024*1024 }, ++}; ++ ++/* ++ * Define static partitions for flash device ++ */ ++static struct mtd_partition partition_info512[] = { ++ { .name= "GESBC NAND FLASH", ++ .offset= 0, ++ .size= 512*1024*1024 }, ++}; ++ ++#define NUM_PARTITIONS 1 ++#endif ++ ++ ++/* ++ * hardware specific access to control-lines ++ * NAND_NCE: bit 0 -> bit 3 ++ * NAND_CLE: bit 1 -> bit 4 ++ * NAND_ALE: bit 2 -> bit 6 ++ */ ++static void gesbc_hwcontrol(struct mtd_info *mtd, int cmd, int ctrl) ++{ ++ unsigned long flags; ++ struct nand_chip *chip = mtd->priv; ++ ++ /* Disbale interrupt to avoid race condition */ ++ local_irq_save(flags); ++ ++ if (ctrl & NAND_CTRL_CHANGE) { ++ unsigned char bits; ++ ++ bits = (ctrl & NAND_CLE) << 3; ++ bits |= (ctrl & NAND_ALE) << 4; ++ if (ctrl & NAND_NCE) ++ bits &= ~0x08; ++ else ++ bits |= 0x08; ++ ++ __raw_writel( (__raw_readl(GPIO_PADR) & ~0x58 )| bits, GPIO_PADR); ++ } ++ if (cmd != NAND_CMD_NONE) ++ writeb(cmd, chip->IO_ADDR_W); ++ /* Restore interrupt state */ ++ local_irq_restore(flags); ++} ++ ++/* ++ * read device ready pin ++ */ ++static int gesbc_device_ready(struct mtd_info *mtd) ++{ ++ return (__raw_readl(GPIO_PADR) & 0x80) >> 7; ++} ++ ++#define MTDID "s3c2440-nand" ++ ++static const char *probes[] = { "cmdlinepart", NULL }; ++ ++ ++ ++/* ++ * Main initialization routine ++ */ ++static int __init gesbc_nand_init (void) ++{ ++ struct nand_chip *this; ++ const char *part_type = 0; ++ int mtd_parts_nb = 0; ++ struct mtd_partition *mtd_parts = 0; ++ unsigned long flags; ++ void * gesbc_fio_base; ++ ++ /* Allocate memory for MTD device structure and private data */ ++ gesbc_mtd = kmalloc(sizeof(struct mtd_info) + ++ sizeof(struct nand_chip), ++ GFP_KERNEL); ++ if (!gesbc_mtd) { ++ printk("Unable to allocate GESBC NAND MTD device structure.\n"); ++ return -ENOMEM; ++ } ++ ++ /* map physical adress */ ++ gesbc_fio_base = ioremap(gesbc_fio_pbase, SZ_1K); ++ if(!gesbc_fio_base) { ++ printk("ioremap GESBC-93xx NAND flash failed\n"); ++ kfree(gesbc_mtd); ++ return -EIO; ++ } ++ ++ ++ /* Get pointer to private data */ ++ this = (struct nand_chip *) (&gesbc_mtd[1]); ++ ++ /* Initialize structures */ ++ memset((char *) gesbc_mtd, 0, sizeof(struct mtd_info)); ++ memset((char *) this, 0, sizeof(struct nand_chip)); ++ ++ /* Link the private data with the MTD structure */ ++ gesbc_mtd->priv = this; ++ ++ /* Disbale interrupt to avoid race condition */ ++ local_irq_save(flags); ++ ++ /* ++ * Set GPIO Port A control register so that the pins are configured ++ * to be outputs for controlling the NAND flash. ++ */ ++ __raw_writel((__raw_readl(GPIO_PADDR) | 0x58) & ~0x80, GPIO_PADDR); ++ /* Clear NCE, clear CLE, clear ALE */ ++ __raw_writel( (__raw_readl(GPIO_PADR) | 0x08 ) & ~0x50, GPIO_PADR); ++ /* Set SRAM controller to 32 bit (8 bit just doesn't work, don't know why) bus width and 7 CLK wait state */ ++ __raw_writel(0x10003ce0, SMCBCR1); ++ local_irq_restore(flags); ++ ++ ++ /* insert callbacks */ ++ this->IO_ADDR_R = (void *) gesbc_fio_base; ++ this->IO_ADDR_W = (void *) gesbc_fio_base; ++ this->cmd_ctrl = (void *) gesbc_hwcontrol; ++ this->dev_ready = gesbc_device_ready; ++ this->chip_delay = 25; ++ this->ecc.mode = NAND_ECC_SOFT; ++ ++ __raw_writel(0xffffffff, gesbc_fio_base); ++ printk("Searching for NAND flash...\n"); ++ /* Scan to find existence of the device */ ++ if (nand_scan (gesbc_mtd, 1)) { ++ iounmap((void *)gesbc_fio_base); ++ kfree (gesbc_mtd); ++ return -ENXIO; ++ } ++ ++#ifdef CONFIG_MTD_CMDLINE_PARTS ++ gesbc_mtd->name="GESBC-NAND"; ++ mtd_parts_nb = parse_mtd_partitions(gesbc_mtd, probes, &mtd_parts, 0); ++ if (mtd_parts_nb > 0) ++ part_type = "command line"; ++ else ++ mtd_parts_nb = 0; ++#endif ++ ++ if (mtd_parts_nb == 0) ++ { ++ mtd_parts_nb = NUM_PARTITIONS; ++ mtd_parts = partition_info32; ++ if (gesbc_mtd->size >= (128 * 0x100000)) ++ mtd_parts = partition_info128; ++ if (gesbc_mtd->size >= (256 * 0x100000)) ++ mtd_parts = partition_info256; ++ if (gesbc_mtd->size >= (512 * 0x100000)) ++ mtd_parts = partition_info512; ++ part_type = "static"; ++ } ++ ++ /* Register the partitions */ ++ printk(KERN_NOTICE "Using %s partition definition\n", part_type); ++ add_mtd_partitions(gesbc_mtd, mtd_parts, mtd_parts_nb); ++ ++ /* Return happy */ ++ return 0; ++} ++module_init(gesbc_nand_init); ++ ++/* ++ * Clean up routine ++ */ ++static void __exit gesbc_nand_cleanup (void) ++{ ++/* struct nand_chip *this = (struct nand_chip *) &gesbc_mtd[1]; */ ++ ++ /* Unregister the device */ ++ del_mtd_device (gesbc_mtd); ++ ++ /* Free the MTD device structure */ ++ kfree (gesbc_mtd); ++} ++module_exit(gesbc_nand_cleanup); ++ ++MODULE_LICENSE("GPL"); ++MODULE_AUTHOR("zql@glomationinc.com"); ++MODULE_DESCRIPTION("MTD map driver for Glomation GESBC-93xx board"); ++ +-- +1.5.2.5 + diff --git a/packages/linux/linux-2.6.23+2.6.24-rc5/gesbc-9302/defconfig b/packages/linux/linux-2.6.23+2.6.24-rc5/gesbc-9302/defconfig new file mode 100644 index 0000000000..e45c86e160 --- /dev/null +++ b/packages/linux/linux-2.6.23+2.6.24-rc5/gesbc-9302/defconfig @@ -0,0 +1,1125 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.24-rc5 +# Mon Dec 17 17:01:48 2007 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +# CONFIG_GENERIC_GPIO is not set +# CONFIG_GENERIC_TIME is not set +# CONFIG_GENERIC_CLOCKEVENTS is not set +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ZONE_DMA=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_AUDIT is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +# CONFIG_FAIR_GROUP_SCHED is not set +# CONFIG_SYSFS_DEPRECATED is not set +# CONFIG_RELAY is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +CONFIG_IOSCHED_DEADLINE=y +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_DEFAULT_AS is not set +CONFIG_DEFAULT_DEADLINE=y +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="deadline" + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +CONFIG_ARCH_EP93XX=y +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set + +# +# Cirrus EP93xx Implementation Options +# +CONFIG_CRUNCH=y + +# +# EP93xx Platforms +# +# CONFIG_MACH_ADSSPHERE is not set +CONFIG_MACH_EDB9302=y +# CONFIG_MACH_EDB9302A is not set +# CONFIG_MACH_EDB9307 is not set +# CONFIG_MACH_EDB9312 is not set +# CONFIG_MACH_EDB9315 is not set +# CONFIG_MACH_EDB9315A is not set +# CONFIG_MACH_GESBC9312 is not set +# CONFIG_MACH_MICRO9 is not set +# CONFIG_MACH_MICRO9H is not set +# CONFIG_MACH_MICRO9M is not set +# CONFIG_MACH_MICRO9L is not set +# CONFIG_MACH_TS72XX is not set + +# +# Boot options +# + +# +# Power management +# + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM920T=y +CONFIG_CPU_32v4T=y +CONFIG_CPU_ABRT_EV4T=y +CONFIG_CPU_CACHE_V4WT=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +# CONFIG_ARM_THUMB is not set +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set +# CONFIG_OUTER_CACHE is not set +CONFIG_ARM_VIC=y + +# +# Bus support +# +CONFIG_ARM_AMBA=y +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +# CONFIG_TICK_ONESHOT is not set +# CONFIG_PREEMPT is not set +# CONFIG_NO_IDLE_HZ is not set +CONFIG_HZ=100 +# CONFIG_AEABI is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="console=ttyAM0 root=/dev/ram" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +CONFIG_FPE_NWFPE_XP=y +# CONFIG_FPE_FASTFPE is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set +# CONFIG_ARTHUR is not set + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_SUSPEND_UP_POSSIBLE=y + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONF |