diff options
Diffstat (limited to 'packages/uboot')
9 files changed, 39002 insertions, 2 deletions
diff --git a/packages/uboot/u-boot-1.1.6/u-boot-1.1.6-83xx-optimizations.patch b/packages/uboot/u-boot-1.1.6/u-boot-1.1.6-83xx-optimizations.patch new file mode 100644 index 0000000000..fe85228771 --- /dev/null +++ b/packages/uboot/u-boot-1.1.6/u-boot-1.1.6-83xx-optimizations.patch @@ -0,0 +1,89 @@ +diff --exclude CVS -uNr u-boot-1.1.6/cpu/mpc83xx/cpu_init.c u-boot-1.1.6.modified/cpu/mpc83xx/cpu_init.c +--- u-boot-1.1.6/cpu/mpc83xx/cpu_init.c 2007-04-10 17:43:16.000000000 -0400 ++++ u-boot-1.1.6.modified/cpu/mpc83xx/cpu_init.c 2007-04-10 17:31:51.000000000 -0400 +@@ -66,10 +66,30 @@ + memset ((void *) gd, 0, sizeof (gd_t)); + + /* system performance tweaking */ ++ /* System Priority Configuration Register (SPCR) */ ++#ifdef CFG_SPCR_PCIHPE ++ /* PCI highest priority enable */ ++ im->sysconf.spcr = (im->sysconf.spcr & ~SPCR_PCIHPE) | (CFG_SPCR_PCIHPE << SPCR_PCIHPE_SHIFT); ++#endif + +-#ifdef CFG_ACR_PIPE_DEP +- /* Arbiter pipeline depth */ +- im->arbiter.acr = (im->arbiter.acr & ~ACR_PIPE_DEP) | (3 << ACR_PIPE_DEP_SHIFT); ++#ifdef CFG_SPCR_PCIPR ++ /* PCI bridge CSB request priority */ ++ im->sysconf.spcr = (im->sysconf.spcr & ~SPCR_PCIPR) | (CFG_SPCR_PCIPR << SPCR_PCIPR_SHIFT); ++#endif ++ ++#ifdef CFG_SPCR_OPT ++ /* Optimize transactions between CSB and other devices */ ++ im->sysconf.spcr = (im->sysconf.spcr & ~SPCR_OPT) | (CFG_SPCR_OPT << SPCR_OPT_SHIFT); ++#endif ++ ++#ifdef CFG_SPCR_TBEN ++ /* e300 time base unit enable */ ++ im->sysconf.spcr = (im->sysconf.spcr & ~SPCR_TBEN) | (CFG_SPCR_TBEN << SPCR_TBEN_SHIFT); ++#endif ++ ++#ifdef CFG_SPCR_COREPR ++ /* e300 core CSB request priority */ ++ im->sysconf.spcr = (im->sysconf.spcr & ~SPCR_COREPR) | (CFG_SPCR_COREPR << SPCR_COREPR_SHIFT); + #endif + + #ifdef CFG_SPCR_TSEC1EP +@@ -82,6 +102,7 @@ + im->sysconf.spcr = (im->sysconf.spcr & ~SPCR_TSEC2EP) | (3 << SPCR_TSEC2EP_SHIFT); + #endif + ++ /* System Clock Control Register (SCCR) */ + #ifdef CFG_SCCR_TSEC1CM + /* TSEC1 clock mode */ + im->clk.sccr = (im->clk.sccr & ~SCCR_TSEC1CM) | (1 << SCCR_TSEC1CM_SHIFT); +@@ -91,6 +112,12 @@ + im->clk.sccr = (im->clk.sccr & ~SCCR_TSEC2CM) | (1 << SCCR_TSEC2CM_SHIFT); + #endif + ++ /* Arbiter Control Register (ACR) */ ++#ifdef CFG_ACR_PIPE_DEP ++ /* Arbiter pipeline depth */ ++ im->arbiter.acr = (im->arbiter.acr & ~ACR_PIPE_DEP) | (3 << ACR_PIPE_DEP_SHIFT); ++#endif ++ + #ifdef CFG_ACR_RPTCNT + /* Arbiter repeat count */ + im->arbiter.acr = ((im->arbiter.acr & ~(ACR_RPTCNT)) | (3 << ACR_RPTCNT_SHIFT)); +diff --exclude CVS -uNr u-boot-1.1.6/include/configs/MPC8323ERDB.h u-boot-1.1.6.modified/include/configs/MPC8323ERDB.h +--- u-boot-1.1.6/include/configs/MPC8323ERDB.h 2007-04-10 17:43:16.000000000 -0400 ++++ u-boot-1.1.6.modified/include/configs/MPC8323ERDB.h 2007-04-10 17:32:03.000000000 -0400 +@@ -63,6 +63,16 @@ + HRCWH_BIG_ENDIAN |\ + HRCWH_LALE_NORMAL) + ++/* System performance */ ++#define CFG_ACR_PIPE_DEP 3 /* Arbiter pipeline depth (0-3) */ ++#define CFG_ACR_RPTCNT 3 /* Arbiter repeat count (0-7) */ ++#define CFG_SPCR_PCIHPE 0 /* (0-1) PCI highest priority enable */ ++#define CFG_SPCR_PCIPR 0 /* (0-3) PCI bridge CSB request priority */ ++#define CFG_SPCR_OPT 1 /* (0-1) Optimize transactions between CSB and the SEC and QUICC Engine block */ ++#define CFG_SPCR_TBEN 1 /* (0-1) e300 time base unit enable */ ++#define CFG_SPCR_COREPR 0 /* (0-3) e300 core CSB request priority */ ++ ++ + /* + * System IO Config + */ +diff --exclude CVS -uNr u-boot-1.1.6/include/mpc83xx.h u-boot-1.1.6.modified/include/mpc83xx.h +--- u-boot-1.1.6/include/mpc83xx.h 2007-04-10 17:43:16.000000000 -0400 ++++ u-boot-1.1.6.modified/include/mpc83xx.h 2007-04-10 17:32:15.000000000 -0400 +@@ -91,6 +91,7 @@ + #define SPCR_PCIPR 0x03000000 /* PCI bridge system bus request priority */ + #define SPCR_PCIPR_SHIFT (31-7) + #define SPCR_OPT 0x00800000 /* Optimize */ ++#define SPCR_OPT_SHIFT (31-8) + #define SPCR_TBEN 0x00400000 /* E300 PowerPC core time base unit enable */ + #define SPCR_TBEN_SHIFT (31-9) + #define SPCR_COREPR 0x00300000 /* E300 PowerPC Core system bus request priority */ diff --git a/packages/uboot/u-boot-1.1.6/u-boot-1.1.6-fsl-1-Add-support-for-the-MPC832XEMDS-board.patch b/packages/uboot/u-boot-1.1.6/u-boot-1.1.6-fsl-1-Add-support-for-the-MPC832XEMDS-board.patch new file mode 100644 index 0000000000..5018cd3434 --- /dev/null +++ b/packages/uboot/u-boot-1.1.6/u-boot-1.1.6-fsl-1-Add-support-for-the-MPC832XEMDS-board.patch @@ -0,0 +1,1809 @@ +fe298a1bbd7b9526ca1139da8977e1a076c4e176 +diff --git a/Makefile b/Makefile +index d2534ab..d172411 100644 +--- a/Makefile ++++ b/Makefile +@@ -1621,6 +1621,30 @@ MPC8360EMDS_SLAVE_config: unconfig + MPC8349ITX_config: unconfig + @$(MKCONFIG) $(@:_config=) ppc mpc83xx mpc8349itx + ++MPC832XEMDS_config \ ++MPC832XEMDS_HOST_33_config \ ++MPC832XEMDS_HOST_66_config \ ++MPC832XEMDS_SLAVE_config: unconfig ++ @echo "" >include/config.h ; \ ++ if [ "$(findstring _HOST_,$@)" ] ; then \ ++ echo -n "... PCI HOST " ; \ ++ echo "#define CONFIG_PCI" >>include/config.h ; \ ++ fi ; \ ++ if [ "$(findstring _SLAVE_,$@)" ] ; then \ ++ echo "...PCI SLAVE 66M" ; \ ++ echo "#define CONFIG_PCI" >>include/config.h ; \ ++ echo "#define CONFIG_PCISLAVE" >>include/config.h ; \ ++ fi ; \ ++ if [ "$(findstring _33_,$@)" ] ; then \ ++ echo -n "...33M ..." ; \ ++ echo "#define PCI_33M" >>include/config.h ; \ ++ fi ; \ ++ if [ "$(findstring _66_,$@)" ] ; then \ ++ echo -n "...66M..." ; \ ++ echo "#define PCI_66M" >>include/config.h ; \ ++ fi ; ++ @$(MKCONFIG) -a MPC832XEMDS ppc mpc83xx mpc832xemds ++ + ######################################################################### + ## MPC85xx Systems + ######################################################################### +diff --git a/board/mpc832xemds/Makefile b/board/mpc832xemds/Makefile +new file mode 100644 +index 0000000..5ec7a87 +--- /dev/null ++++ b/board/mpc832xemds/Makefile +@@ -0,0 +1,50 @@ ++# ++# (C) Copyright 2006 ++# Wolfgang Denk, DENX Software Engineering, wd@denx.de. ++# ++# See file CREDITS for list of people who contributed to this ++# project. ++# ++# This program is free software; you can redistribute it and/or ++# modify it under the terms of the GNU General Public License as ++# published by the Free Software Foundation; either version 2 of ++# the License, or (at your option) any later version. ++# ++# This program is distributed in the hope that it will be useful, ++# but WITHOUT ANY WARRANTY; without even the implied warranty of ++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++# GNU General Public License for more details. ++# ++# You should have received a copy of the GNU General Public License ++# along with this program; if not, write to the Free Software ++# Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++# MA 02111-1307 USA ++# ++ ++include $(TOPDIR)/config.mk ++ ++LIB = $(obj)lib$(BOARD).a ++ ++COBJS := $(BOARD).o pci.o ++ ++SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) ++OBJS := $(addprefix $(obj),$(COBJS)) ++SOBJS := $(addprefix $(obj),$(SOBJS)) ++ ++$(LIB): $(obj).depend $(OBJS) ++ $(AR) $(ARFLAGS) $@ $(OBJS) ++ ++clean: ++ rm -f $(SOBJS) $(OBJS) ++ ++distclean: clean ++ rm -f $(LIB) core *.bak .depend ++ ++######################################################################### ++ ++# defines $(obj).depend target ++include $(SRCTREE)/rules.mk ++ ++sinclude $(obj).depend ++ ++######################################################################### +diff --git a/board/mpc832xemds/config.mk b/board/mpc832xemds/config.mk +new file mode 100644 +index 0000000..6c3eca7 +--- /dev/null ++++ b/board/mpc832xemds/config.mk +@@ -0,0 +1,28 @@ ++# ++# (C) Copyright 2006 ++# Wolfgang Denk, DENX Software Engineering, wd@denx.de. ++# ++# See file CREDITS for list of people who contributed to this ++# project. ++# ++# This program is free software; you can redistribute it and/or ++# modify it under the terms of the GNU General Public License as ++# published by the Free Software Foundation; either version 2 of ++# the License, or (at your option) any later version. ++# ++# This program is distributed in the hope that it will be useful, ++# but WITHOUT ANY WARRANTY; without even the implied warranty of ++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++# GNU General Public License for more details. ++# ++# You should have received a copy of the GNU General Public License ++# along with this program; if not, write to the Free Software ++# Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++# MA 02111-1307 USA ++# ++ ++# ++# MPC832XEMDS ++# ++ ++TEXT_BASE = 0xFE000000 +diff --git a/board/mpc832xemds/mpc832xemds.c b/board/mpc832xemds/mpc832xemds.c +new file mode 100644 +index 0000000..772da67 +--- /dev/null ++++ b/board/mpc832xemds/mpc832xemds.c +@@ -0,0 +1,176 @@ ++/* ++ * Copyright (C) 2006 Freescale Semiconductor, Inc. ++ * ++ * Dave Liu <daveliu@freescale.com> ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ */ ++ ++#include <common.h> ++#include <ioports.h> ++#include <mpc83xx.h> ++#include <i2c.h> ++#include <spd.h> ++#include <miiphy.h> ++#include <command.h> ++#if defined(CONFIG_PCI) ++#include <pci.h> ++#endif ++#if defined(CONFIG_SPD_EEPROM) ++#include <spd_sdram.h> ++#else ++#include <asm/mmu.h> ++#endif ++#if defined(CONFIG_OF_FLAT_TREE) ++#include <ft_build.h> ++#endif ++ ++const qe_iop_conf_t qe_iop_conf_tab[] = { ++ /* ETH3 */ ++ {1, 0, 1, 0, 1}, /* TxD0 */ ++ {1, 1, 1, 0, 1}, /* TxD1 */ ++ {1, 2, 1, 0, 1}, /* TxD2 */ ++ {1, 3, 1, 0, 1}, /* TxD3 */ ++ {1, 9, 1, 0, 1}, /* TxER */ ++ {1, 12, 1, 0, 1}, /* TxEN */ ++ {3, 24, 2, 0, 1}, /* TxCLK->CLK10 */ ++ ++ {1, 4, 2, 0, 1}, /* RxD0 */ ++ {1, 5, 2, 0, 1}, /* RxD1 */ ++ {1, 6, 2, 0, 1}, /* RxD2 */ ++ {1, 7, 2, 0, 1}, /* RxD3 */ ++ {1, 8, 2, 0, 1}, /* RxER */ ++ {1, 10, 2, 0, 1}, /* RxDV */ ++ {0, 13, 2, 0, 1}, /* RxCLK->CLK9 */ ++ {1, 11, 2, 0, 1}, /* COL */ ++ {1, 13, 2, 0, 1}, /* CRS */ ++ ++ /* ETH4 */ ++ {1, 18, 1, 0, 1}, /* TxD0 */ ++ {1, 19, 1, 0, 1}, /* TxD1 */ ++ {1, 20, 1, 0, 1}, /* TxD2 */ ++ {1, 21, 1, 0, 1}, /* TxD3 */ ++ {1, 27, 1, 0, 1}, /* TxER */ ++ {1, 30, 1, 0, 1}, /* TxEN */ ++ {3, 6, 2, 0, 1}, /* TxCLK->CLK8 */ ++ ++ {1, 22, 2, 0, 1}, /* RxD0 */ ++ {1, 23, 2, 0, 1}, /* RxD1 */ ++ {1, 24, 2, 0, 1}, /* RxD2 */ ++ {1, 25, 2, 0, 1}, /* RxD3 */ ++ {1, 26, 1, 0, 1}, /* RxER */ ++ {1, 28, 2, 0, 1}, /* Rx_DV */ ++ {3, 31, 2, 0, 1}, /* RxCLK->CLK7 */ ++ {1, 29, 2, 0, 1}, /* COL */ ++ {1, 31, 2, 0, 1}, /* CRS */ ++ ++ {3, 4, 3, 0, 2}, /* MDIO */ ++ {3, 5, 1, 0, 2}, /* MDC */ ++ ++ {0, 0, 0, 0, QE_IOP_TAB_END}, /* END of table */ ++}; ++ ++int board_early_init_f(void) ++{ ++ volatile u8 *bcsr = (volatile u8 *)CFG_BCSR; ++ ++ /* Enable flash write */ ++ bcsr[9] &= ~0x08; ++ ++ return 0; ++} ++ ++int fixed_sdram(void); ++ ++long int initdram(int board_type) ++{ ++ volatile immap_t *im = (immap_t *) CFG_IMMR; ++ u32 msize = 0; ++ ++ if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32) im) ++ return -1; ++ ++ /* DDR SDRAM - Main SODIMM */ ++ im->sysconf.ddrlaw[0].bar = CFG_DDR_BASE & LAWBAR_BAR; ++ ++ msize = fixed_sdram(); ++ ++ puts("\n DDR RAM: "); ++ ++ /* return total bus SDRAM size(bytes) -- DDR */ ++ return (msize * 1024 * 1024); ++} ++ ++/************************************************************************* ++ * fixed sdram init -- doesn't use serial presence detect. ++ ************************************************************************/ ++int fixed_sdram(void) ++{ ++ volatile immap_t *im = (immap_t *) CFG_IMMR; ++ u32 msize = 0; ++ u32 ddr_size; ++ u32 ddr_size_log2; ++ ++ msize = CFG_DDR_SIZE; ++ for (ddr_size = msize << 20, ddr_size_log2 = 0; ++ (ddr_size > 1); ddr_size = ddr_size >> 1, ddr_size_log2++) { ++ if (ddr_size & 1) { ++ return -1; ++ } ++ } ++ im->sysconf.ddrlaw[0].ar = ++ LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE); ++#if (CFG_DDR_SIZE != 128) ++#warning Currenly any ddr size other than 128 is not supported ++#endif ++ im->ddr.sdram_clk_cntl = CFG_DDR_CLK_CNTL; ++ im->ddr.csbnds[0].csbnds = CFG_DDR_CS0_BNDS; ++ im->ddr.cs_config[0] = CFG_DDR_CS0_CONFIG; ++ im->ddr.timing_cfg_0 = CFG_DDR_TIMING_0; ++ im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1; ++ im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2; ++ im->ddr.timing_cfg_3 = CFG_DDR_TIMING_3; ++ im->ddr.sdram_cfg = CFG_DDR_SDRAM_CFG; ++ im->ddr.sdram_cfg2 = CFG_DDR_SDRAM_CFG2; ++ im->ddr.sdram_mode = CFG_DDR_MODE; ++ im->ddr.sdram_mode2 = CFG_DDR_MODE2; ++ im->ddr.sdram_interval = CFG_DDR_INTERVAL; ++ __asm__ __volatile__ ("sync"); ++ udelay(200); ++ ++ im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN; ++ __asm__ __volatile__ ("sync"); ++ return msize; ++} ++ ++int checkboard(void) ++{ ++ puts("Board: Freescale MPC832XEMDS\n"); ++ return 0; ++} ++ ++#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP) ++void ++ft_board_setup(void *blob, bd_t *bd) ++{ ++ u32 *p; ++ int len; ++ ++#ifdef CONFIG_PCI ++ ft_pci_setup(blob, bd); ++#endif ++ ft_cpu_setup(blob, bd); ++ ++ p = ft_get_prop(blob, "/memory/reg", &len); ++ if (p != NULL) { ++ *p++ = cpu_to_be32(bd->bi_memstart); ++ *p = cpu_to_be32(bd->bi_memsize); ++ } ++} ++#endif +diff --git a/board/mpc832xemds/pci.c b/board/mpc832xemds/pci.c +new file mode 100644 +index 0000000..09f3ac3 +--- /dev/null ++++ b/board/mpc832xemds/pci.c +@@ -0,0 +1,313 @@ ++/* ++ * Copyright (C) 2006 Freescale Semiconductor, Inc. ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ */ ++ ++/* ++ * PCI Configuration space access support for MPC83xx PCI Bridge ++ */ ++#include <asm/mmu.h> ++#include <asm/io.h> ++#include <common.h> ++#include <pci.h> ++#include <i2c.h> ++ ++#include <asm/fsl_i2c.h> ++ ++DECLARE_GLOBAL_DATA_PTR; ++ ++#if defined(CONFIG_PCI) ++#define PCI_FUNCTION_CONFIG 0x44 ++#define PCI_FUNCTION_CFG_LOCK 0x20 ++ ++/* ++ * Initialize PCI Devices, report devices found ++ */ ++#ifndef CONFIG_PCI_PNP ++static struct pci_config_table pci_mpc83xxemds_config_table[] = { ++ { ++ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, ++ pci_cfgfunc_config_device, ++ {PCI_ENET0_IOADDR, ++ PCI_ENET0_MEMADDR, ++ PCI_COMMON_MEMORY | PCI_COMMAND_MASTER} ++ }, ++ {} ++} ++#endif ++static struct pci_controller hose[] = { ++ { ++#ifndef CONFIG_PCI_PNP ++ config_table:pci_mpc83xxemds_config_table, ++#endif ++ }, ++}; ++ ++/********************************************************************** ++ * pci_init_board() ++ *********************************************************************/ ++void pci_init_board(void) ++#ifdef CONFIG_PCISLAVE ++{ ++ u16 reg16; ++ volatile immap_t *immr; ++ volatile law83xx_t *pci_law; ++ volatile pot83xx_t *pci_pot; ++ volatile pcictrl83xx_t *pci_ctrl; ++ volatile pciconf83xx_t *pci_conf; ++ ++ immr = (immap_t *) CFG_IMMR; ++ pci_law = immr->sysconf.pcilaw; ++ pci_pot = immr->ios.pot; ++ pci_ctrl = immr->pci_ctrl; ++ pci_conf = immr->pci_conf; ++ /* ++ * Configure PCI Inbound Translation Windows ++ */ ++ pci_ctrl[0].pitar0 = 0x0; ++ pci_ctrl[0].pibar0 = 0x0; ++ pci_ctrl[0].piwar0 = PIWAR_EN | PIWAR_RTT_SNOOP | ++ PIWAR_WTT_SNOOP | PIWAR_IWS_4K; ++ ++ pci_ctrl[0].pitar1 = 0x0; ++ pci_ctrl[0].pibar1 = 0x0; ++ pci_ctrl[0].piebar1 = 0x0; ++ pci_ctrl[0].piwar1 &= ~PIWAR_EN; ++ ++ pci_ctrl[0].pitar2 = 0x0; ++ pci_ctrl[0].pibar2 = 0x0; ++ pci_ctrl[0].piebar2 = 0x0; ++ pci_ctrl[0].piwar2 &= ~PIWAR_EN; ++ ++ hose[0].first_busno = 0; ++ hose[0].last_busno = 0xff; ++ pci_setup_indirect(&hose[0], ++ (CFG_IMMR + 0x8300), (CFG_IMMR + 0x8304)); ++ reg16 = 0xff; ++ ++ pci_hose_read_config_word(&hose[0], PCI_BDF(0, 0, 0), ++ PCI_COMMAND, ®16); ++ reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MEMORY; ++ pci_hose_write_config_word(&hose[0], PCI_BDF(0, 0, 0), ++ PCI_COMMAND, reg16); ++ ++ /* ++ * Clear non-reserved bits in status register. ++ */ ++ pci_hose_write_config_word(&hose[0], PCI_BDF(0, 0, 0), ++ PCI_STATUS, 0xffff); ++ pci_hose_write_config_byte(&hose[0], PCI_BDF(0, 0, 0), ++ PCI_LATENCY_TIMER, 0x80); ++ ++ /* ++ * Unlock configuration lock in PCI function configuration register. ++ */ ++ pci_hose_read_config_word(&hose[0], PCI_BDF(0, 0, 0), ++ PCI_FUNCTION_CONFIG, ®16); ++ reg16 &= ~(PCI_FUNCTION_CFG_LOCK); ++ pci_hose_write_config_word(&hose[0], PCI_BDF(0, 0, 0), ++ PCI_FUNCTION_CONFIG, reg16); ++ ++ printf("Enabled PCI 32bit Agent Mode\n"); ++} ++#else ++{ ++ volatile immap_t *immr; ++ volatile clk83xx_t *clk; ++ volatile law83xx_t *pci_law; ++ volatile pot83xx_t *pci_pot; ++ volatile pcictrl83xx_t *pci_ctrl; ++ volatile pciconf83xx_t *pci_conf; ++ ++ u8 val8, orig_i2c_bus; ++ u16 reg16; ++ u32 val32; ++ u32 dev; ++ ++ immr = (immap_t *) CFG_IMMR; ++ clk = (clk83xx_t *) & immr->clk; ++ pci_law = immr->sysconf.pcilaw; ++ pci_pot = immr->ios.pot; ++ pci_ctrl = immr->pci_ctrl; ++ pci_conf = immr->pci_conf; ++ /* ++ * Configure PCI controller and PCI_CLK_OUTPUT both in 66M mode ++ */ ++ val32 = clk->occr; ++ udelay(2000); ++#if defined(PCI_66M) ++ clk->occr = OCCR_PCICOE0 | OCCR_PCICOE1 | OCCR_PCICOE2; ++ printf("PCI clock is 66MHz\n"); ++#elif defined(PCI_33M) ++ clk->occr = OCCR_PCICOE0 | OCCR_PCICOE1 | OCCR_PCICOE2 | ++ OCCR_PCICD0 | OCCR_PCICD1 | OCCR_PCICD2 | OCCR_PCICR; ++ printf("PCI clock is 33MHz\n"); ++#else ++ clk->occr = OCCR_PCICOE0 | OCCR_PCICOE1 | OCCR_PCICOE2; ++ printf("PCI clock is 66MHz\n"); ++#endif ++ udelay(2000); ++ ++ /* ++ * Configure PCI Local Access Windows ++ */ ++ pci_law[0].bar = CFG_PCI_MEM_PHYS & LAWBAR_BAR; ++ pci_law[0].ar = LAWAR_EN | LAWAR_SIZE_512M; ++ ++ pci_law[1].bar = CFG_PCI_IO_PHYS & LAWBAR_BAR; ++ pci_law[1].ar = LAWAR_EN | LAWAR_SIZE_1M; ++ ++ /* ++ * Configure PCI Outbound Translation Windows ++ */ ++ ++ /* PCI mem space - prefetch */ ++ pci_pot[0].potar = (CFG_PCI_MEM_BASE >> 12) & POTAR_TA_MASK; ++ pci_pot[0].pobar = (CFG_PCI_MEM_PHYS >> 12) & POBAR_BA_MASK; ++ pci_pot[0].pocmr = ++ POCMR_EN | POCMR_SE | (POCMR_CM_256M & POCMR_CM_MASK); ++ ++ /* PCI mmio - non-prefetch mem space */ ++ pci_pot[1].potar = (CFG_PCI_MMIO_BASE >> 12) & POTAR_TA_MASK; ++ pci_pot[1].pobar = (CFG_PCI_MMIO_PHYS >> 12) & POBAR_BA_MASK; ++ pci_pot[1].pocmr = POCMR_EN | (POCMR_CM_256M & POCMR_CM_MASK); ++ ++ /* PCI IO space */ ++ pci_pot[2].potar = (CFG_PCI_IO_BASE >> 12) & POTAR_TA_MASK; ++ pci_pot[2].pobar = (CFG_PCI_IO_PHYS >> 12) & POBAR_BA_MASK; ++ pci_pot[2].pocmr = POCMR_EN | POCMR_IO | (POCMR_CM_1M & POCMR_CM_MASK); ++ ++ /* ++ * Configure PCI Inbound Translation Windows ++ */ ++ pci_ctrl[0].pitar1 = (CFG_PCI_SLV_MEM_LOCAL >> 12) & PITAR_TA_MASK; ++ pci_ctrl[0].pibar1 = (CFG_PCI_SLV_MEM_BUS >> 12) & PIBAR_MASK; ++ pci_ctrl[0].piebar1 = 0x0; ++ pci_ctrl[0].piwar1 = ++ PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP | PIWAR_WTT_SNOOP | ++ PIWAR_IWS_2G; ++ ++ /* ++ * Assign PIB PMC slot to desired PCI bus ++ */ ++ ++ /* Switch temporarily to I2C bus #2 */ ++ orig_i2c_bus = i2c_get_bus_num(); ++ i2c_set_bus_num(1); ++ ++ val8 = 0; ++ i2c_write(0x23, 0x6, 1, &val8, 1); ++ i2c_write(0x23, 0x7, 1, &val8, 1); ++ val8 = 0xff; ++ i2c_write(0x23, 0x2, 1, &val8, 1); ++ i2c_write(0x23, 0x3, 1, &val8, 1); ++ ++ val8 = 0; ++ i2c_write(0x26, 0x6, 1, &val8, 1); ++ val8 = 0x34; ++ i2c_write(0x26, 0x7, 1, &val8, 1); ++ ++ val8 = 0xf9; /* PMC2, PMC3 slot to PCI bus */ ++ i2c_write(0x26, 0x2, 1, &val8, 1); ++ val8 = 0xff; ++ i2c_write(0x26, 0x3, 1, &val8, 1); ++ ++ val8 = 0; ++ i2c_write(0x27, 0x6, 1, &val8, 1); ++ i2c_write(0x27, 0x7, 1, &val8, 1); ++ val8 = 0xff; ++ i2c_write(0x27, 0x2, 1, &val8, 1); ++ val8 = 0xef; ++ i2c_write(0x27, 0x3, 1, &val8, 1); ++ asm("eieio"); ++ ++ /* Reset to original I2C bus */ ++ i2c_set_bus_num(orig_i2c_bus); ++ ++ /* ++ * Release PCI RST Output signal ++ */ ++ udelay(2000); ++ pci_ctrl[0].gcr = 1; ++ udelay(2000); ++ ++ hose[0].first_busno = 0; ++ hose[0].last_busno = 0xff; ++ ++ /* PCI memory prefetch space */ ++ pci_set_region(hose[0].regions + 0, ++ CFG_PCI_MEM_BASE, ++ CFG_PCI_MEM_PHYS, ++ CFG_PCI_MEM_SIZE, PCI_REGION_MEM | PCI_REGION_PREFETCH); ++ ++ /* PCI memory space */ ++ pci_set_region(hose[0].regions + 1, ++ CFG_PCI_MMIO_BASE, ++ CFG_PCI_MMIO_PHYS, CFG_PCI_MMIO_SIZE, PCI_REGION_MEM); ++ ++ /* PCI IO space */ ++ pci_set_region(hose[0].regions + 2, ++ CFG_PCI_IO_BASE, ++ CFG_PCI_IO_PHYS, CFG_PCI_IO_SIZE, PCI_REGION_IO); ++ ++ /* System memory space */ ++ pci_set_region(hose[0].regions + 3, ++ CFG_PCI_SLV_MEM_LOCAL, ++ CFG_PCI_SLV_MEM_BUS, ++ CFG_PCI_SLV_MEM_SIZE, ++ PCI_REGION_MEM | PCI_REGION_MEMORY); ++ ++ hose[0].region_count = 4; ++ ++ pci_setup_indirect(&hose[0], ++ (CFG_IMMR + 0x8300), (CFG_IMMR + 0x8304)); ++ ++ pci_register_hose(hose); ++ ++ /* ++ * Write command register ++ */ ++ reg16 = 0xff; ++ dev = PCI_BDF(0, 0, 0); ++ pci_hose_read_config_word(&hose[0], dev, PCI_COMMAND, ®16); ++ reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; ++ pci_hose_write_config_word(&hose[0], dev, PCI_COMMAND, reg16); ++ ++ /* ++ * Clear non-reserved bits in status register. ++ */ ++ pci_hose_write_config_word(&hose[0], dev, PCI_STATUS, 0xffff); ++ pci_hose_write_config_byte(&hose[0], dev, PCI_LATENCY_TIMER, 0x80); ++ pci_hose_write_config_byte(&hose[0], dev, PCI_CACHE_LINE_SIZE, 0x08); ++ ++ printf("PCI 32bit bus on PMC2 & PMC3\n"); ++ ++ /* ++ * Hose scan. ++ */ ++ hose->last_busno = pci_hose_scan(hose); ++} ++#endif /* CONFIG_PCISLAVE */ ++ ++#ifdef CONFIG_OF_FLAT_TREE ++void ++ft_pci_setup(void *blob, bd_t *bd) ++{ ++ u32 *p; ++ int len; ++ ++ p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@8500/bus-range", &len); ++ if (p != NULL) { ++ p[0] = hose[0].first_busno; ++ p[1] = hose[0].last_busno; ++ } ++} ++#endif /* CONFIG_OF_FLAT_TREE */ ++#endif /* CONFIG_PCI */ +diff --git a/board/mpc832xemds/u-boot.lds b/board/mpc832xemds/u-boot.lds +new file mode 100644 +index 0000000..937c87a +--- /dev/null ++++ b/board/mpc832xemds/u-boot.lds +@@ -0,0 +1,123 @@ ++/* ++ * (C) Copyright 2006 ++ * Wolfgang Denk, DENX Software Engineering, wd@denx.de. ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++OUTPUT_ARCH(powerpc) ++SECTIONS ++{ ++ /* Read-only sections, merged into text segment: */ ++ . = + SIZEOF_HEADERS; ++ .interp : { *(.interp) } ++ .hash : { *(.hash) } ++ .dynsym : { *(.dynsym) } ++ .dynstr : { *(.dynstr) } ++ .rel.text : { *(.rel.text) } ++ .rela.text : { *(.rela.text) } ++ .rel.data : { *(.rel.data) } ++ .rela.data : { *(.rela.data) } ++ .rel.rodata : { *(.rel.rodata) } ++ .rela.rodata : { *(.rela.rodata) } ++ .rel.got : { *(.rel.got) } ++ .rela.got : { *(.rela.got) } ++ .rel.ctors : { *(.rel.ctors) } ++ .rela.ctors : { *(.rela.ctors) } ++ .rel.dtors : { *(.rel.dtors) } ++ .rela.dtors : { *(.rela.dtors) } ++ .rel.bss : { *(.rel.bss) } ++ .rela.bss : { *(.rela.bss) } ++ .rel.plt : { *(.rel.plt) } ++ .rela.plt : { *(.rela.plt) } ++ .init : { *(.init) } ++ .plt : { *(.plt) } ++ .text : ++ { ++ cpu/mpc83xx/start.o (.text) ++ *(.text) ++ *(.fixup) ++ *(.got1) ++ . = ALIGN(16); ++ *(.rodata) ++ *(.rodata1) ++ *(.rodata.str1.4) ++ *(.eh_frame) ++ } ++ .fini : { *(.fini) } =0 ++ .ctors : { *(.ctors) } ++ .dtors : { *(.dtors) } ++ ++ /* Read-write section, merged into data segment: */ ++ . = (. + 0x0FFF) & 0xFFFFF000; ++ _erotext = .; ++ PROVIDE (erotext = .); ++ .reloc : ++ { ++ *(.got) ++ _GOT2_TABLE_ = .; ++ *(.got2) ++ _FIXUP_TABLE_ = .; ++ *(.fixup) ++ } ++ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2; ++ __fixup_entries = (. - _FIXUP_TABLE_) >> 2; ++ ++ .data : ++ { ++ *(.data) ++ *(.data1) ++ *(.sdata) ++ *(.sdata2) ++ *(.dynamic) ++ CONSTRUCTORS ++ } ++ _edata = .; ++ PROVIDE (edata = .); ++ ++ . = .; ++ __u_boot_cmd_start = .; ++ .u_boot_cmd : { *(.u_boot_cmd) } ++ __u_boot_cmd_end = .; ++ ++ ++ . = .; ++ __start___ex_table = .; ++ __ex_table : { *(__ex_table) } ++ __stop___ex_table = .; ++ ++ . = ALIGN(4096); ++ __init_begin = .; ++ .text.init : { *(.text.init) } ++ .data.init : { *(.data.init) } ++ . = ALIGN(4096); ++ __init_end = .; ++ ++ __bss_start = .; ++ .bss : ++ { ++ *(.sbss) *(.scommon) ++ *(.dynbss) ++ *(.bss) ++ *(COMMON) ++ } ++ _end = . ; ++ PROVIDE (end = .); ++} ++ENTRY(_start) +diff --git a/cpu/mpc83xx/cpu.c b/cpu/mpc83xx/cpu.c +index 1b51078..bc61219 100644 +--- a/cpu/mpc83xx/cpu.c ++++ b/cpu/mpc83xx/cpu.c +@@ -92,6 +92,22 @@ int checkcpu(void) + case SPR_8360_REV12: + puts("MPC8360, "); + break; ++ case SPR_8323E_REV10: ++ case SPR_8323E_REV11: ++ puts("MPC8323E, "); ++ break; ++ case SPR_8323_REV10: ++ case SPR_8323_REV11: ++ puts("MPC8323, "); ++ break; ++ case SPR_8321E_REV10: ++ case SPR_8321E_REV11: ++ puts("MPC8321E, "); ++ break; ++ case SPR_8321_REV10: ++ case SPR_8321_REV11: ++ puts("MPC8321, "); ++ break; + default: + puts("Rev: Unknown\n"); + return -1; /* Not sure what this is */ +diff --git a/cpu/mpc83xx/cpu_init.c b/cpu/mpc83xx/cpu_init.c +index 7574fab..eb256e5 100644 +--- a/cpu/mpc83xx/cpu_init.c ++++ b/cpu/mpc83xx/cpu_init.c +@@ -119,6 +119,11 @@ void cpu_init_f (volatile immap_t * im) + #ifdef CFG_SICRL + im->sysconf.sicrl = CFG_SICRL; + #endif ++ /* DDR control driver register */ ++#ifdef CFG_DDRCDR ++ im->sysconf.ddrcdr = CFG_DDRCDR; ++#endif ++ + #ifdef CONFIG_QE + /* Config QE ioports */ + config_qe_ioports(); +diff --git a/cpu/mpc83xx/speed.c b/cpu/mpc83xx/speed.c +index 40ba6b0..9fd1bf1 100644 +--- a/cpu/mpc83xx/speed.c ++++ b/cpu/mpc83xx/speed.c +@@ -107,15 +107,19 @@ int get_clocks(void) + #endif + u32 core_clk; + u32 i2c1_clk; ++#if !defined(CONFIG_MPC832X) + u32 i2c2_clk; ++#endif + u32 enc_clk; + u32 lbiu_clk; + u32 lclk_clk; + u32 ddr_clk; +-#if defined (CONFIG_MPC8360) ++#if defined(CONFIG_MPC8360) ++ u32 ddr_sec_clk; ++#endif ++#if defined(CONFIG_MPC8360) || defined(CONFIG_MPC832X) + u32 qepmf; + u32 qepdf; +- u32 ddr_sec_clk; + u32 qe_clk; + u32 brg_clk; + #endif +@@ -227,10 +231,12 @@ int get_clocks(void) + return -9; + } + #endif +-#if defined (CONFIG_MPC8360) ++#if defined(CONFIG_MPC8360) || defined(CONFIG_MPC832X) + i2c1_clk = csb_clk; + #endif ++#if !defined(CONFIG_MPC832X) + i2c2_clk = csb_clk; /* i2c-2 clk is equal to csb clk */ ++#endif + + switch ((sccr & SCCR_ENCCM) >> SCCR_ENCCM_SHIFT) { + case 0: +@@ -249,12 +255,9 @@ int get_clocks(void) + /* unkown SCCR_ENCCM value */ + return -6; + } +-#if defined(CONFIG_MPC8349) || defined(CONFIG_MPC8360) ++ + lbiu_clk = csb_clk * + (1 + ((im->reset.rcwl & HRCWL_LBIUCM) >> HRCWL_LBIUCM_SHIFT)); +-#else +-#error Unknown MPC83xx chip +-#endif + lcrr = (im->lbus.lcrr & LCRR_CLKDIV) >> LCRR_CLKDIV_SHIFT; + switch (lcrr) { + case 2: +@@ -266,17 +269,14 @@ int get_clocks(void) + /* unknown lcrr */ + return -10; + } +-#if defined(CONFIG_MPC8349) || defined(CONFIG_MPC8360) ++ + ddr_clk = csb_clk * + (1 + ((im->reset.rcwl & HRCWL_DDRCM) >> HRCWL_DDRCM_SHIFT)); + corepll = (im->reset.rcwl & HRCWL_COREPLL) >> HRCWL_COREPLL_SHIFT; +-#if defined (CONFIG_MPC8360) ++#if defined(CONFIG_MPC8360) + ddr_sec_clk = csb_clk * (1 + + ((im->reset.rcwl & HRCWL_LBIUCM) >> HRCWL_LBIUCM_SHIFT)); + #endif +-#else +-#error Unknown MPC83xx chip +-#endif + + corecnf_tab_index = ((corepll & 0x1F) << 2) | ((corepll & 0x60) >> 5); + if (corecnf_tab_index > (sizeof(corecnf_tab) / sizeof(corecnf_t))) { +@@ -306,7 +306,7 @@ int get_clocks(void) + return -12; + } + +-#if defined (CONFIG_MPC8360) ++#if defined(CONFIG_MPC8360) || defined(CONFIG_MPC832X) + qepmf = (im->reset.rcwl & HRCWL_CEPMF) >> HRCWL_CEPMF_SHIFT; + qepdf = (im->reset.rcwl & HRCWL_CEPDF) >> HRCWL_CEPDF_SHIFT; + qe_clk = (pci_sync_in * qepmf) / (1 + qepdf); +@@ -322,13 +322,17 @@ int get_clocks(void) + #endif + gd->core_clk = core_clk; + gd->i2c1_clk = i2c1_clk; ++#if !defined(CONFIG_MPC832X) + gd->i2c2_clk = i2c2_clk; ++#endif + gd->enc_clk = enc_clk; + gd->lbiu_clk = lbiu_clk; + gd->lclk_clk = lclk_clk; + gd->ddr_clk = ddr_clk; +-#if defined (CONFIG_MPC8360) ++#if defined(CONFIG_MPC8360) + gd->ddr_sec_clk = ddr_sec_clk; ++#endif ++#if defined(CONFIG_MPC8360) || defined(CONFIG_MPC832X) + gd->qe_clk = qe_clk; + gd->brg_clk = brg_clk; + #endif +@@ -352,18 +356,21 @@ int print_clock_conf(void) + printf("Clock configuration:\n"); + printf(" Coherent System Bus: %4d MHz\n", gd->csb_clk / 1000000); + printf(" Core: %4d MHz\n", gd->core_clk / 1000000); +-#if defined (CONFIG_MPC8360) ++#if defined(CONFIG_MPC8360) || defined(CONFIG_MPC832X) + printf(" QE: %4d MHz\n", gd->qe_clk / 1000000); ++ printf(" BRG: %4d MHz\n", gd->brg_clk / 1000000); + #endif + printf(" Local Bus Controller:%4d MHz\n", gd->lbiu_clk / 1000000); + printf(" Local Bus: %4d MHz\n", gd->lclk_clk / 1000000); + printf(" DDR: %4d MHz\n", gd->ddr_clk / 1000000); +-#if defined (CONFIG_MPC8360) ++#if defined(CONFIG_MPC8360) + printf(" DDR Secondary: %4d MHz\n", gd->ddr_sec_clk / 1000000); + #endif + printf(" SEC: %4d MHz\n", gd->enc_clk / 1000000); + printf(" I2C1: %4d MHz\n", gd->i2c1_clk / 1000000); ++#if !defined(CONFIG_MPC832X) + printf(" I2C2: %4d MHz\n", gd->i2c2_clk / 1000000); ++#endif + #if defined(CONFIG_MPC8349) + printf(" TSEC1: %4d MHz\n", gd->tsec1_clk / 1000000); + printf(" TSEC2: %4d MHz\n", gd->tsec2_clk / 1000000); +diff --git a/drivers/qe/qe.h b/drivers/qe/qe.h +index f7f8ed0..0bcd0a9 100644 +--- a/drivers/qe/qe.h ++++ b/drivers/qe/qe.h +@@ -30,7 +30,7 @@ + #define UCC_MAX_NUM 8 + + #define QE_DATAONLY_BASE (uint)(128) +-#define QE_DATAONLY_SIZE ((uint)(0xc000) - QE_DATAONLY_BASE) ++#define QE_DATAONLY_SIZE (QE_MURAM_SIZE - QE_DATAONLY_BASE) + + /* QE threads SNUM + */ +diff --git a/drivers/qe/uec.c b/drivers/qe/uec.c +index c44a5be..aea455b 100644 +--- a/drivers/qe/uec.c ++++ b/drivers/qe/uec.c +@@ -432,7 +432,12 @@ static int init_phy(struct eth_device *dev) + } + memset(mii_info, 0, sizeof(*mii_info)); + +- mii_info->speed = SPEED_1000; ++ if (uec->uec_info->uf_info.eth_type == GIGA_ETH) { ++ mii_info->speed = SPEED_1000; ++ } else { ++ mii_info->speed = SPEED_100; ++ } ++ + mii_info->duplex = DUPLEX_FULL; + mii_info->pause = 0; + mii_info->link = 1; +@@ -508,7 +513,8 @@ static void adjust_link(struct eth_device *dev) + } + + if (mii_info->speed != uec->oldspeed) { +- switch (mii_info->speed) { ++ if (uec->uec_info->uf_info.eth_type == GIGA_ETH) { ++ switch (mii_info->speed) { + case 1000: + break; + case 100: +@@ -531,6 +537,7 @@ static void adjust_link(struct eth_device *dev) + printf("%s: Ack,Speed(%d)is illegal\n", + dev->name, mii_info->speed); + break; ++ } + } + + printf("%s: Speed %dBT\n", dev->name, mii_info->speed); +diff --git a/include/asm-ppc/e300.h b/include/asm-ppc/e300.h +index 79dcae4..ff9512f 100644 +--- a/include/asm-ppc/e300.h ++++ b/include/asm-ppc/e300.h +@@ -15,6 +15,11 @@ + #define PVR_8360_REV10 (PVR_83xx | 0x0020) + #define PVR_8360_REV11 (PVR_83xx | 0x0020) + ++#if defined(CONFIG_MPC832X) ++#undef PVR_83xx ++#define PVR_83xx 0x80840000 ++#endif ++ + /* + * Hardware Implementation-Dependent Register 0 (HID0) + */ +diff --git a/include/asm-ppc/immap_83xx.h b/include/asm-ppc/immap_83xx.h +index 67b035c..77a079f 100644 +--- a/include/asm-ppc/immap_83xx.h ++++ b/include/asm-ppc/immap_83xx.h +@@ -60,7 +60,10 @@ typedef struct sysconf83xx { + u32 spcr; /* System Priority Configuration Register */ + u32 sicrl; /* System I/O Configuration Register Low */ + u32 sicrh; /* System I/O Configuration Register High */ +- u8 res6[0xE4]; ++ u8 res6[0x0C]; ++ u32 ddrcdr; /* DDR Control Driver Register */ ++ u32 ddrdsr; /* DDR Debug Status Register */ ++ u8 res7[0xD0]; + } sysconf83xx_t; + + /* +@@ -274,25 +277,35 @@ typedef struct ddr83xx { + ddr_cs_bnds_t csbnds[4];/* Chip Select x Memory Bounds */ + u8 res0[0x60]; + u32 cs_config[4]; /* Chip Select x Configuration */ +- u8 res1[0x78]; ++ u8 res1[0x70]; ++ u32 timing_cfg_3; /* SDRAM Timing Configuration 3 */ ++ u32 timing_cfg_0; /* SDRAM Timing Configuration 0 */ + u32 timing_cfg_1; /* SDRAM Timing Configuration 1 */ + u32 timing_cfg_2; /* SDRAM Timing Configuration 2 */ + u32 sdram_cfg; /* SDRAM Control Configuration */ +- u8 res2[4]; ++ u32 sdram_cfg2; /* SDRAM Control Configuration 2 */ + u32 sdram_mode; /* SDRAM Mode Configuration */ +- u8 res3[8]; ++ u32 sdram_mode2; /* SDRAM Mode Configuration 2 */ ++ u32 sdram_md_cntl; /* SDRAM Mode Control */ + u32 sdram_interval; /* SDRAM Interval Configuration */ +- u8 res9[8]; +- u32 sdram_clk_cntl; +- u8 res4[0xCCC]; ++ u32 ddr_data_init; /* SDRAM Data Initialization */ ++ u8 res2[4]; ++ u32 sdram_clk_cntl; /* SDRAM Clock Control */ ++ u8 res3[0x14]; ++ u32 ddr_init_addr; /* DDR training initialization address */ ++ u32 ddr_init_ext_addr; /* DDR training initialization extended address */ ++ u8 res4[0xAA8]; ++ u32 ddr_ip_rev1; /* DDR IP block revision 1 */ ++ u32 ddr_ip_rev2; /* DDR IP block revision 2 */ ++ u8 res5[0x200]; + u32 data_err_inject_hi; /* Memory Data Path Error Injection Mask High */ + u32 data_err_inject_lo; /* Memory Data Path Error Injection Mask Low */ + u32 ecc_err_inject; /* Memory Data Path Error Injection Mask ECC */ +- u8 res5[0x14]; ++ u8 res6[0x14]; + u32 capture_data_hi; /* Memory Data Path Read Capture High */ + u32 capture_data_lo; /* Memory Data Path Read Capture Low */ + u32 capture_ecc; /* Memory Data Path Read Capture ECC */ +- u8 res6[0x14]; ++ u8 res7[0x14]; + u32 err_detect; /* Memory Error Detect */ + u32 err_disable; /* Memory Error Disable */ + u32 err_int_en; /* Memory Error Interrupt Enable */ +@@ -300,9 +313,9 @@ typedef struct ddr83xx { + u32 capture_address; /* Memory Error Address Capture */ + u32 capture_ext_address;/* Memory Error Extended Address Capture */ + u32 err_sbe; /* Memory Single-Bit ECC Error Management */ +- u8 res7[0xA4]; ++ u8 res8[0xA4]; + u32 debug_reg; +- u8 res8[0xFC]; ++ u8 res9[0xFC]; + } ddr83xx_t; + + /* +@@ -607,6 +620,43 @@ typedef struct immap { + u8 res10[0xC0000]; + u8 qe[0x100000]; /* QE block */ + } immap_t; ++ ++#elif defined(CONFIG_MPC832X) ++typedef struct immap { ++ sysconf83xx_t sysconf; /* System configuration */ ++ wdt83xx_t wdt; /* Watch Dog Timer (WDT) Registers */ ++ rtclk83xx_t rtc; /* Real Time Clock Module Registers */ ++ rtclk83xx_t pit; /* Periodic Interval Timer */ ++ gtm83xx_t gtm[2]; /* Global Timers Module */ ++ ipic83xx_t ipic; /* Integrated Programmable Interrupt Controller */ ++ arbiter83xx_t arbiter; /* System Arbiter Registers */ ++ reset83xx_t reset; /* Reset Module */ ++ clk83xx_t clk; /* System Clock Module */ ++ pmc83xx_t pmc; /* Power Management Control Module */ ++ qepi83xx_t qepi; /* QE Ports Interrupts Registers */ ++ u8 res0[0x300]; ++ u8 dll_ddr[0x100]; ++ u8 dll_lbc[0x100]; ++ u8 res1[0x200]; ++ qepio83xx_t qepio; /* QE Parallel I/O ports */ ++ u8 res2[0x800]; ++ ddr83xx_t ddr; /* DDR Memory Controller Memory */ ++ fsl_i2c_t i2c[2]; /* I2C Controllers */ ++ u8 res3[0x1300]; ++ duart83xx_t duart[2]; /* DUART */ ++ u8 res4[0x900]; ++ lbus83xx_t lbus; /* Local Bus Controller Registers */ ++ u8 res5[0x2000]; ++ dma83xx_t dma; /* DMA */ ++ pciconf83xx_t pci_conf[1]; /* PCI Software Configuration Registers */ ++ u8 res6[128]; ++ ios83xx_t ios; /* Sequencer (IOS) */ ++ pcictrl83xx_t pci_ctrl[1]; /* PCI Controller Control and Status Registers */ ++ u8 res7[0x27A00]; ++ security83xx_t security; ++ u8 res8[0xC0000]; ++ u8 qe[0x100000]; /* QE block */ ++} immap_t; + #endif + + #endif /* __IMMAP_83xx__ */ +diff --git a/include/asm-ppc/immap_qe.h b/include/asm-ppc/immap_qe.h +index f385032..950b949 100644 +--- a/include/asm-ppc/immap_qe.h ++++ b/include/asm-ppc/immap_qe.h +@@ -547,4 +547,10 @@ typedef struct qe_immap { + + extern qe_map_t *qe_immr; + ++#if defined(CONFIG_MPC8360) ++#define QE_MURAM_SIZE 0xc000UL ++#elif defined(CONFIG_MPC832X) ++#define QE_MURAM_SIZE 0x4000UL ++#endif ++ + #endif /* __IMMAP_QE_H__ */ +diff --git a/include/configs/MPC832XEMDS.h b/include/configs/MPC832XEMDS.h +new file mode 100644 +index 0000000..b8bf00f +--- /dev/null ++++ b/include/configs/MPC832XEMDS.h +@@ -0,0 +1,629 @@ ++/* ++ * Copyright (C) 2006 Freescale Semiconductor, Inc. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#ifndef __CONFIG_H ++#define __CONFIG_H ++ ++#undef DEBUG ++ ++/* ++ * High Level Configuration Options ++ */ ++#define CONFIG_E300 1 /* E300 family */ ++#define CONFIG_QE 1 /* Has QE */ ++#define CONFIG_MPC83XX 1 /* MPC83xx family */ ++#define CONFIG_MPC832X 1 /* MPC832x CPU specific */ ++#define CONFIG_MPC832XEMDS 1 /* MPC832XEMDS board specific */ ++ ++/* ++ * System Clock Setup ++ */ ++#ifdef CONFIG_PCISLAVE ++#define CONFIG_83XX_PCICLK 66000000 /* in HZ */ ++#else ++#define CONFIG_83XX_CLKIN 66000000 /* in Hz */ ++#endif ++ ++#ifndef CONFIG_SYS_CLK_FREQ ++#define CONFIG_SYS_CLK_FREQ 66000000 ++#endif ++ ++/* ++ * Hardware Reset Configuration Word ++ */ ++#define CFG_HRCW_LOW (\ ++ HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\ ++ HRCWL_DDR_TO_SCB_CLK_2X1 |\ ++ HRCWL_VCO_1X2 |\ ++ HRCWL_CSB_TO_CLKIN_2X1 |\ ++ HRCWL_CORE_TO_CSB_2X1 |\ ++ HRCWL_CE_PLL_VCO_DIV_2 |\ ++ HRCWL_CE_PLL_DIV_1X1 |\ ++ HRCWL_CE_TO_PLL_1X3) ++ ++#ifdef CONFIG_PCISLAVE ++#define CFG_HRCW_HIGH (\ ++ HRCWH_PCI_AGENT |\ ++ HRCWH_PCI1_ARBITER_DISABLE |\ ++ HRCWH_CORE_ENABLE |\ ++ HRCWH_FROM_0XFFF00100 |\ ++ HRCWH_BOOTSEQ_DISABLE |\ ++ HRCWH_SW_WATCHDOG_DISABLE |\ ++ HRCWH_ROM_LOC_LOCAL_16BIT |\ ++ HRCWH_BIG_ENDIAN |\ ++ HRCWH_LALE_NORMAL) ++#else ++#define CFG_HRCW_HIGH (\ ++ HRCWH_PCI_HOST |\ ++ HRCWH_PCI1_ARBITER_ENABLE |\ ++ HRCWH_CORE_ENABLE |\ ++ HRCWH_FROM_0X00000100 |\ ++ HRCWH_BOOTSEQ_DISABLE |\ ++ HRCWH_SW_WATCHDOG_DISABLE |\ ++ HRCWH_ROM_LOC_LOCAL_16BIT |\ ++ HRCWH_BIG_ENDIAN |\ ++ HRCWH_LALE_NORMAL) ++#endif ++ ++/* ++ * System IO Config ++ */ ++#define CFG_SICRL 0x00000000 ++ ++#define CONFIG_BOARD_EARLY_INIT_F /* call board_pre_init */ ++ ++/* ++ * IMMR new address ++ */ ++#define CFG_IMMR 0xE0000000 ++ ++/* ++ * DDR Setup ++ */ ++#define CFG_DDR_BASE 0x00000000 /* DDR is system memory */ ++#define CFG_SDRAM_BASE CFG_DDR_BASE ++#define CFG_DDR_SDRAM_BASE CFG_DDR_BASE ++#define CFG_DDRCDR 0x73000002 /* DDR II voltage is 1.8V */ ++ ++#undef CONFIG_SPD_EEPROM ++#if defined(CONFIG_SPD_EEPROM) ++/* Determine DDR configuration from I2C interface ++ */ ++#define SPD_EEPROM_ADDRESS 0x51 /* DDR SODIMM */ ++#else ++/* Manually set up DDR parameters ++ */ ++#define CFG_DDR_SIZE 128 /* MB */ ++#define CFG_DDR_CS0_CONFIG 0x80840102 ++#define CFG_DDR_TIMING_0 0x00220802 ++#define CFG_DDR_TIMING_1 0x3935d322 ++#define CFG_DDR_TIMING_2 0x0f9048ca ++#define CFG_DDR_TIMING_3 0x00000000 ++#define CFG_DDR_CLK_CNTL 0x02000000 ++#define CFG_DDR_MODE 0x44400232 ++#define CFG_DDR_MODE2 0x8000c000 ++#define CFG_DDR_INTERVAL 0x03200064 ++#define CFG_DDR_CS0_BNDS 0x00000007 ++#define CFG_DDR_SDRAM_CFG 0x43080000 ++#define CFG_DDR_SDRAM_CFG2 0x00401000 ++#endif ++ ++/* ++ * Memory test ++ */ ++#undef CFG_DRAM_TEST /* memory test, takes time */ ++#define CFG_MEMTEST_START 0x00000000 /* memtest region */ ++#define CFG_MEMTEST_END 0x00100000 ++ ++/* ++ * The reserved memory ++ */ ++#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */ ++ ++#if (CFG_MONITOR_BASE < CFG_FLASH_BASE) ++#define CFG_RAMBOOT ++#else ++#undef CFG_RAMBOOT ++#endif ++ ++#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ ++#define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */ ++ ++/* ++ * Initial RAM Base Address Setup ++ */ ++#define CFG_INIT_RAM_LOCK 1 ++#define CFG_INIT_RAM_ADDR 0xE6000000 /* Initial RAM address */ ++#define CFG_INIT_RAM_END 0x1000 /* End of used area in RAM */ ++#define CFG_GBL_DATA_SIZE 0x100 /* num bytes initial data */ ++#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) ++ ++/* ++ * Local Bus Configuration & Clock Setup ++ */ ++#define CFG_LCRR (LCRR_DBYP | LCRR_CLKDIV_2) ++#define CFG_LBC_LBCR 0x00000000 ++ ++/* ++ * FLASH on the Local Bus ++ */ ++#define CFG_FLASH_CFI /* use the Common Flash Interface */ ++#define CFG_FLASH_CFI_DRIVER /* use the CFI driver */ ++#define CFG_FLASH_BASE 0xFE000000 /* FLASH base address */ ++#define CFG_FLASH_SIZE 16 /* FLASH size is 16M */ ++ ++#define CFG_LBLAWBAR0_PRELIM CFG_FLASH_BASE /* Window base at flash base */ ++#define CFG_LBLAWAR0_PRELIM 0x80000018 /* 32MB window size */ ++ ++#define CFG_BR0_PRELIM (CFG_FLASH_BASE | /* Flash Base address */ \ ++ (2 << BR_PS_SHIFT) | /* 16 bit port size */ \ ++ BR_V) /* valid */ ++#define CFG_OR0_PRELIM 0xfe006ff7 /* 16MB Flash size */ ++ ++#define CFG_MAX_FLASH_BANKS 1 /* number of banks */ ++#define CFG_MAX_FLASH_SECT 128 /* sectors per device */ ++ ++#undef CFG_FLASH_CHECKSUM ++ ++/* ++ * BCSR on the Local Bus ++ */ ++#define CFG_BCSR 0xF8000000 ++#define CFG_LBLAWBAR1_PRELIM CFG_BCSR /* Access window base at BCSR base */ ++#define CFG_LBLAWAR1_PRELIM 0x8000000E /* Access window size 32K */ ++ ++#define CFG_BR1_PRELIM (CFG_BCSR|0x00000801) /* Port size=8bit, MSEL=GPCM */ ++#define CFG_OR1_PRELIM 0xFFFFE9f7 /* length 32K */ ++ ++/* ++ * SDRAM on the Local Bus ++ */ ++#undef CFG_LB_SDRAM /* The board has not SRDAM on local bus */ ++ ++#ifdef CFG_LB_SDRAM ++#define CFG_LBC_SDRAM_BASE 0xF0000000 /* SDRAM base address */ ++#define CFG_LBC_SDRAM_SIZE 64 /* LBC SDRAM is 64MB */ ++ ++#define CFG_LBLAWBAR2_PRELIM CFG_LBC_SDRAM_BASE ++#define CFG_LBLAWAR2_PRELIM 0x80000019 /* 64MB */ ++ ++/*local bus BR2, OR2 definition for SDRAM if soldered on the EPB board */ ++/* ++ * Base Register 2 and Option Register 2 configure SDRAM. ++ * The SDRAM base address, CFG_LBC_SDRAM_BASE, is 0xf0000000. ++ * ++ * For BR2, need: ++ * Base address of 0xf0000000 = BR[0:16] = 1111 0000 0000 0000 0 ++ * port size = 32-bits = BR2[19:20] = 11 ++ * no parity checking = BR2[21:22] = 00 ++ * SDRAM for MSEL = BR2[24:26] = 011 ++ * Valid = BR[31] = 1 ++ * ++ * 0 4 8 12 16 20 24 28 ++ * 1111 0000 0000 0000 0001 1000 0110 0001 = f0001861 ++ * ++ * CFG_LBC_SDRAM_BASE should be masked and OR'ed into ++ * the top 17 bits of BR2. ++ */ ++ ++#define CFG_BR2_PRELIM 0xf0001861 /*Port size=32bit, MSEL=SDRAM */ ++ ++/* ++ * The SDRAM size in MB, CFG_LBC_SDRAM_SIZE, is 64. ++ * ++ * For OR2, need: ++ * 64MB mask for AM, OR2[0:7] = 1111 1100 ++ * XAM, OR2[17:18] = 11 ++ * 9 columns OR2[19-21] = 010 ++ * 13 rows OR2[23-25] = 100 ++ * EAD set for extra time OR[31] = 1 ++ * ++ * 0 4 8 12 16 20 24 28 ++ * 1111 1100 0000 0000 0110 1001 0000 0001 = fc006901 ++ */ ++ ++#define CFG_OR2_PRELIM 0xfc006901 ++ ++#define CFG_LBC_LSRT 0x32000000 /* LB sdram refresh timer, about 6us */ ++#define CFG_LBC_MRTPR 0x20000000 /* LB refresh timer prescal, 266MHz/32 */ ++ ++/* ++ * LSDMR masks ++ */ ++#define CFG_LBC_LSDMR_OP_NORMAL (0 << (31 - 4)) ++#define CFG_LBC_LSDMR_OP_ARFRSH (1 << (31 - 4)) ++#define CFG_LBC_LSDMR_OP_SRFRSH (2 << (31 - 4)) ++#define CFG_LBC_LSDMR_OP_MRW (3 << (31 - 4)) ++#define CFG_LBC_LSDMR_OP_PRECH (4 << (31 - 4)) ++#define CFG_LBC_LSDMR_OP_PCHALL (5 << (31 - 4)) ++#define CFG_LBC_LSDMR_OP_ACTBNK (6 << (31 - 4)) ++#define CFG_LBC_LSDMR_OP_RWINV (7 << (31 - 4)) ++ ++#define CFG_LBC_LSDMR_COMMON 0x0063b723 ++ ++/* ++ * SDRAM Controller configuration sequence. ++ */ ++#define CFG_LBC_LSDMR_1 ( CFG_LBC_LSDMR_COMMON \ ++ | CFG_LBC_LSDMR_OP_PCHALL) ++#define CFG_LBC_LSDMR_2 ( CFG_LBC_LSDMR_COMMON \ ++ | CFG_LBC_LSDMR_OP_ARFRSH) ++#define CFG_LBC_LSDMR_3 ( CFG_LBC_LSDMR_COMMON \ ++ | CFG_LBC_LSDMR_OP_ARFRSH) ++#define CFG_LBC_LSDMR_4 ( CFG_LBC_LSDMR_COMMON \ ++ | CFG_LBC_LSDMR_OP_MRW) ++#define CFG_LBC_LSDMR_5 ( CFG_LBC_LSDMR_COMMON \ ++ | CFG_LBC_LSDMR_OP_NORMAL) ++ ++#endif ++ ++/* ++ * Windows to access PIB via local bus ++ */ ++#define CFG_LBLAWBAR3_PRELIM 0xf8008000 /* windows base 0xf8008000 */ ++#define CFG_LBLAWAR3_PRELIM 0x8000000f /* windows size 64KB */ ++ ++/* ++ * CS2 on Local Bus, to PIB ++ */ ++#define CFG_BR2_PRELIM 0xf8008801 /* CS2 base address at 0xf8008000 */ ++#define CFG_OR2_PRELIM 0xffffe9f7 /* size 32KB, port size 8bit, GPCM */ ++ ++/* ++ * CS3 on Local Bus, to PIB ++ */ ++#define CFG_BR3_PRELIM 0xf8010801 /* CS3 base address at 0xf8010000 */ ++#define CFG_OR3_PRELIM 0xffffe9f7 /* size 32KB, port size 8bit, GPCM */ ++ ++/* ++ * Serial Port ++ */ ++#define CONFIG_CONS_INDEX 1 ++#undef CONFIG_SERIAL_SOFTWARE_FIFO ++#define CFG_NS16550 ++#define CFG_NS16550_SERIAL ++#define CFG_NS16550_REG_SIZE 1 ++#define CFG_NS16550_CLK get_bus_freq(0) ++ ++#define CFG_BAUDRATE_TABLE \ ++ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200} ++ ++#define CFG_NS16550_COM1 (CFG_IMMR+0x4500) ++#define CFG_NS16550_COM2 (CFG_IMMR+0x4600) ++ ++/* Use the HUSH parser */ ++#define CFG_HUSH_PARSER ++#ifdef CFG_HUSH_PARSER ++#define CFG_PROMPT_HUSH_PS2 "> " ++#endif ++ ++/* pass open firmware flat tree */ ++#define CONFIG_OF_FLAT_TREE 1 ++#define CONFIG_OF_BOARD_SETUP 1 ++ ++/* maximum size of the flat tree (8K) */ ++#define OF_FLAT_TREE_MAX_SIZE 8192 ++ ++#define OF_CPU "PowerPC,8323@0" ++#define OF_SOC "soc8323@e0000000" ++#define OF_TBCLK (bd->bi_busfreq / 4) ++#define OF_STDOUT_PATH "/soc8323@e0000000/serial@4500" ++ ++/* I2C */ ++#define CONFIG_HARD_I2C /* I2C with hardware support */ ++#undef CONFIG_SOFT_I2C /* I2C bit-banged */ ++#define CONFIG_FSL_I2C ++#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ ++#define CFG_I2C_SLAVE 0x7F ++#define CFG_I2C_NOPROBES {0x51} /* Don't probe these addrs */ ++#define CFG_I2C_OFFSET 0x3000 ++ ++/* ++ * Config on-board RTC ++ */ ++#define CONFIG_RTC_DS1374 /* use ds1374 rtc via i2c */ ++#define CFG_I2C_RTC_ADDR 0x68 /* at address 0x68 */ ++ ++/* ++ * General PCI ++ * Addresses are mapped 1-1. ++ */ ++#define CFG_PCI_MEM_BASE 0x80000000 ++#define CFG_PCI_MEM_PHYS CFG_PCI_MEM_BASE ++#define CFG_PCI_MEM_SIZE 0x10000000 /* 256M */ ++#define CFG_PCI_MMIO_BASE 0x90000000 ++#define CFG_PCI_MMIO_PHYS CFG_PCI_MMIO_BASE ++#define CFG_PCI_MMIO_SIZE 0x10000000 /* 256M */ ++#define CFG_PCI_IO_BASE 0xE0300000 ++#define CFG_PCI_IO_PHYS 0xE0300000 ++#define CFG_PCI_IO_SIZE 0x100000 /* 1M */ ++ ++#define CFG_PCI_SLV_MEM_LOCAL CFG_SDRAM_BASE ++#define CFG_PCI_SLV_MEM_BUS 0x00000000 ++#define CFG_PCI_SLV_MEM_SIZE 0x80000000 ++ ++ ++#ifdef CONFIG_PCI ++ ++#define CONFIG_NET_MULTI ++#define CONFIG_PCI_PNP /* do pci plug-and-play */ ++ ++#undef CONFIG_EEPRO100 ++#undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ ++#define CFG_PCI_SUBSYS_VENDORID 0x1957 /* Freescale */ ++ ++#endif /* CONFIG_PCI */ ++ ++ ++#ifndef CONFIG_NET_MULTI ++#define CONFIG_NET_MULTI 1 ++#endif ++ ++/* ++ * QE UEC ethernet configuration ++ */ ++#define CONFIG_UEC_ETH ++#define CONFIG_ETHPRIME "Freescale GETH" ++ ++#define CONFIG_UEC_ETH1 /* ETH3 */ ++ ++#ifdef CONFIG_UEC_ETH1 ++#define CFG_UEC1_UCC_NUM 2 /* UCC3 */ ++#define CFG_UEC1_RX_CLK QE_CLK9 ++#define CFG_UEC1_TX_CLK QE_CLK10 ++#define CFG_UEC1_ETH_TYPE FAST_ETH ++#define CFG_UEC1_PHY_ADDR 3 ++#define CFG_UEC1_INTERFACE_MODE ENET_100_MII ++#endif ++ ++#define CONFIG_UEC_ETH2 /* ETH4 */ ++ ++#ifdef CONFIG_UEC_ETH2 ++#define CFG_UEC2_UCC_NUM 3 /* UCC4 */ ++#define CFG_UEC2_RX_CLK QE_CLK7 ++#define CFG_UEC2_TX_CLK QE_CLK8 ++#define CFG_UEC2_ETH_TYPE FAST_ETH ++#define CFG_UEC2_PHY_ADDR 4 ++#define CFG_UEC2_INTERFACE_MODE ENET_100_MII ++#endif ++ ++/* ++ * Environment ++ */ ++#ifndef CFG_RAMBOOT ++ #define CFG_ENV_IS_IN_FLASH 1 ++ #define CFG_ENV_ADDR (CFG_MONITOR_BASE + 0x40000) ++ #define CFG_ENV_SECT_SIZE 0x40000 /* 256K(one sector) for env */ ++ #define CFG_ENV_SIZE 0x2000 ++#else ++ #define CFG_NO_FLASH 1 /* Flash is not usable now */ ++ #define CFG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */ ++ #define CFG_ENV_ADDR (CFG_MONITOR_BASE - 0x1000) ++ #define CFG_ENV_SIZE 0x2000 ++#endif ++ ++#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ ++#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ ++ ++#if defined(CFG_RAMBOOT) ++#if defined(CONFIG_PCI) ++#define CONFIG_COMMANDS ((CONFIG_CMD_DFL \ ++ | CFG_CMD_PING \ ++ | CFG_CMD_ASKENV \ ++ | CFG_CMD_PCI \ ++ | CFG_CMD_I2C) \ ++ & \ ++ ~(CFG_CMD_ENV \ ++ | CFG_CMD_LOADS)) ++#else ++#define CONFIG_COMMANDS ((CONFIG_CMD_DFL \ ++ | CFG_CMD_PING \ ++ | CFG_CMD_ASKENV \ ++ | CFG_CMD_I2C) \ ++ & \ ++ ~(CFG_CMD_ENV \ ++ | CFG_CMD_LOADS)) ++#endif ++#else ++#if defined(CONFIG_PCI) ++#define CONFIG_COMMANDS (CONFIG_CMD_DFL \ ++ | CFG_CMD_PCI \ ++ | CFG_CMD_PING \ ++ | CFG_CMD_ASKENV \ ++ | CFG_CMD_I2C) ++#else ++#define CONFIG_COMMANDS (CONFIG_CMD_DFL \ ++ | CFG_CMD_PING \ ++ | CFG_CMD_ASKENV \ ++ | CFG_CMD_I2C ) ++#endif ++#endif ++ ++#include <cmd_confdefs.h> ++ ++#undef CONFIG_WATCHDOG /* watchdog disabled */ ++ ++/* ++ * Miscellaneous configurable options ++ */ ++#define CFG_LONGHELP /* undef to save memory */ ++#define CFG_LOAD_ADDR 0x2000000 /* default load address */ ++#define CFG_PROMPT "=> " /* Monitor Command Prompt */ ++ ++#if (CONFIG_COMMANDS & CFG_CMD_KGDB) ++ #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ ++#else ++ #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ ++#endif ++ ++#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ ++#define CFG_MAXARGS 16 /* max number of command args */ ++#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ ++#define CFG_HZ 1000 /* decrementer freq: 1ms ticks */ ++ ++/* ++ * For booting Linux, the board info and command line data ++ * have to be in the first 8 MB of memory, since this is ++ * the maximum mapped by the Linux kernel during initialization. ++ */ ++#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ ++ ++/* ++ * Core HID Setup ++ */ ++#define CFG_HID0_INIT 0x000000000 ++#define CFG_HID0_FINAL HID0_ENABLE_MACHINE_CHECK ++#define CFG_HID2 HID2_HBE ++ ++/* ++ * Cache Config ++ */ ++#define CFG_DCACHE_SIZE 16384 ++#define CFG_CACHELINE_SIZE 32 ++#if (CONFIG_COMMANDS & CFG_CMD_KGDB) ++#define CFG_CACHELINE_SHIFT 5 /*log base 2 of the above value */ ++#endif ++ ++/* ++ * MMU Setup ++ */ ++ ++/* DDR: cache cacheable */ ++#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) ++#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) ++#define CFG_DBAT0L CFG_IBAT0L ++#define CFG_DBAT0U CFG_IBAT0U ++ ++/* IMMRBAR & PCI IO: cache-inhibit and guarded */ ++#define CFG_IBAT1L (CFG_IMMR | BATL_PP_10 | \ ++ BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) ++#define CFG_IBAT1U (CFG_IMMR | BATU_BL_4M | BATU_VS | BATU_VP) ++#define CFG_DBAT1L CFG_IBAT1L ++#define CFG_DBAT1U CFG_IBAT1U ++ ++/* BCSR: cache-inhibit and guarded */ ++#define CFG_IBAT2L (CFG_BCSR | BATL_PP_10 | \ ++ BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) ++#define CFG_IBAT2U (CFG_BCSR | BATU_BL_128K | BATU_VS | BATU_VP) ++#define CFG_DBAT2L CFG_IBAT2L ++#define CFG_DBAT2U CFG_IBAT2U ++ ++/* FLASH: icache cacheable, but dcache-inhibit and guarded */ ++#define CFG_IBAT3L (CFG_FLASH_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) ++#define CFG_IBAT3U (CFG_FLASH_BASE | BATU_BL_32M | BATU_VS | BATU_VP) ++#define CFG_DBAT3L (CFG_FLASH_BASE | BATL_PP_10 | \ ++ BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) ++#define CFG_DBAT3U CFG_IBAT3U ++ ++#define CFG_IBAT4L (0) ++#define CFG_IBAT4U (0) ++#define CFG_DBAT4L CFG_IBAT4L ++#define CFG_DBAT4U CFG_IBAT4U ++ ++/* Stack in dcache: cacheable, no memory coherence */ ++#define CFG_IBAT5L (CFG_INIT_RAM_ADDR | BATL_PP_10) ++#define CFG_IBAT5U (CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP) ++#define CFG_DBAT5L CFG_IBAT5L ++#define CFG_DBAT5U CFG_IBAT5U ++ ++#ifdef CONFIG_PCI ++/* PCI MEM space: cacheable */ ++#define CFG_IBAT6L (CFG_PCI_MEM_PHYS | BATL_PP_10 | BATL_MEMCOHERENCE) ++#define CFG_IBAT6U (CFG_PCI_MEM_PHYS | BATU_BL_256M | BATU_VS | BATU_VP) ++#define CFG_DBAT6L CFG_IBAT6L ++#define CFG_DBAT6U CFG_IBAT6U ++/* PCI MMIO space: cache-inhibit and guarded */ ++#define CFG_IBAT7L (CFG_PCI_MMIO_PHYS | BATL_PP_10 | \ ++ BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) ++#define CFG_IBAT7U (CFG_PCI_MMIO_PHYS | BATU_BL_256M | BATU_VS | BATU_VP) ++#define CFG_DBAT7L CFG_IBAT7L ++#define CFG_DBAT7U CFG_IBAT7U ++#else ++#define CFG_IBAT6L (0) ++#define CFG_IBAT6U (0) ++#define CFG_IBAT7L (0) ++#define CFG_IBAT7U (0) ++#define CFG_DBAT6L CFG_IBAT6L ++#define CFG_DBAT6U CFG_IBAT6U ++#define CFG_DBAT7L CFG_IBAT7L ++#define CFG_DBAT7U CFG_IBAT7U ++#endif ++ ++/* ++ * Internal Definitions ++ * ++ * Boot Flags ++ */ ++#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ ++#define BOOTFLAG_WARM 0x02 /* Software reboot */ ++ ++#if (CONFIG_COMMANDS & CFG_CMD_KGDB) ++#define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */ ++#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ ++#endif ++ ++/* ++ * Environment Configuration ++ */ ++ ++#define CONFIG_ENV_OVERWRITE ++ ++#if defined(CONFIG_UEC_ETH) ++#define CONFIG_ETHADDR 00:04:9f:ef:03:01 ++#define CONFIG_HAS_ETH1 ++#define CONFIG_ETH1ADDR 00:04:9f:ef:03:02 ++#endif ++ ++#define CONFIG_BAUDRATE 115200 ++ ++#define CONFIG_LOADADDR 200000 /* default location for tftp and bootm */ ++ ++#define CONFIG_BOOTDELAY 6 /* -1 disables auto-boot */ ++#undef CONFIG_BOOTARGS /* the boot command will set bootargs */ ++ ++#define CONFIG_EXTRA_ENV_SETTINGS \ ++ "netdev=eth0\0" \ ++ "consoledev=ttyS0\0" \ ++ "ramdiskaddr=1000000\0" \ ++ "ramdiskfile=ramfs.83xx\0" \ ++ "fdtaddr=400000\0" \ ++ "fdtfile=mpc832xemds.dtb\0" \ ++ "" ++ ++#define CONFIG_NFSBOOTCOMMAND \ ++ "setenv bootargs root=/dev/nfs rw " \ ++ "nfsroot=$serverip:$rootpath " \ ++ "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ ++ "console=$consoledev,$baudrate $othbootargs;" \ ++ "tftp $loadaddr $bootfile;" \ ++ "tftp $fdtaddr $fdtfile;" \ ++ "bootm $loadaddr - $fdtaddr" ++ ++#define CONFIG_RAMBOOTCOMMAND \ ++ "setenv bootargs root=/dev/ram rw " \ ++ "console=$consoledev,$baudrate $othbootargs;" \ ++ "tftp $ramdiskaddr $ramdiskfile;" \ ++ "tftp $loadaddr $bootfile;" \ ++ "tftp $fdtaddr $fdtfile;" \ ++ "bootm $loadaddr $ramdiskaddr $fdtaddr" ++ ++ ++#define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND ++ ++#endif /* __CONFIG_H */ +diff --git a/include/mpc83xx.h b/include/mpc83xx.h +index 504b6a9..52e4369 100644 +--- a/include/mpc83xx.h ++++ b/include/mpc83xx.h +@@ -75,6 +75,15 @@ + #define SPR_8360E_REV12 0x80480012 + #define SPR_8360_REV12 0x80490012 + ++#define SPR_8323E_REV10 0x80620010 ++#define SPR_8323_REV10 0x80630010 ++#define SPR_8321E_REV10 0x80660010 ++#define SPR_8321_REV10 0x80670010 ++#define SPR_8323E_REV11 0x80620011 ++#define SPR_8323_REV11 0x80630011 ++#define SPR_8321E_REV11 0x80660011 ++#define SPR_8321_REV11 0x80670011 ++ + /* SPCR - System Priority Configuration Register + */ + #define SPCR_PCIHPE 0x10000000 /* PCI Highest Priority Enable */ +@@ -167,6 +176,14 @@ + #define SICRH_UC1EOBI 0x00000004 + #define SICRH_UC2E1OBI 0x00000002 + #define SICRH_UC2E2OBI 0x00000001 ++ ++#elif defined(CONFIG_MPC832X) ++/* SICRL bits - MPC832X specific */ ++#define SICRL_LDP_LCS_A 0x80000000 ++#define SICRL_IRQ_CKS 0x20000000 ++#define SICRL_PCI_MSRC 0x10000000 ++#define SICRL_URT_CTPR 0x06000000 ++#define SICRL_IRQ_CTPR 0x00C00000 + #endif + + /* SWCRR - System Watchdog Control Register +@@ -270,7 +287,7 @@ + #define HRCWL_CORE_TO_CSB_2_5X1 0x00050000 + #define HRCWL_CORE_TO_CSB_3X1 0x00060000 + +-#if defined(CONFIG_MPC8360) ++#if defined(CONFIG_MPC8360) || defined(CONFIG_MPC832X) + #define HRCWL_CEVCOD 0x000000C0 + #define HRCWL_CEVCOD_SHIFT 6 + #define HRCWL_CE_PLL_VCO_DIV_4 0x00000000 +@@ -718,7 +735,7 @@ + #define BR_MS_UPMA 0x00000080 /* UPMA */ + #define BR_MS_UPMB 0x000000A0 /* UPMB */ + #define BR_MS_UPMC 0x000000C0 /* UPMC */ +-#if defined(CONFIG_MPC8360) ++#if defined(CONFIG_MPC8360) || defined(CONFIG_MPC832X) + #define BR_ATOM 0x0000000C + #define BR_ATOM_SHIFT 2 + #endif diff --git a/packages/uboot/u-boot-1.1.6/u-boot-1.1.6-fsl-1-Add-the-MPC832XEMDS-board-readme.patch b/packages/uboot/u-boot-1.1.6/u-boot-1.1.6-fsl-1-Add-the-MPC832XEMDS-board-readme.patch new file mode 100644 index 0000000000..b5e2a87b16 --- /dev/null +++ b/packages/uboot/u-boot-1.1.6/u-boot-1.1.6-fsl-1-Add-the-MPC832XEMDS-board-readme.patch @@ -0,0 +1,131 @@ +657bdd350516722e4d73329caf37aae694f7eaaa +diff --git a/doc/README.mpc832xemds b/doc/README.mpc832xemds +new file mode 100644 +index 0000000..00c3af1 +--- /dev/null ++++ b/doc/README.mpc832xemds +@@ -0,0 +1,124 @@ ++Freescale MPC832XEMDS Board ++----------------------------------------- ++1. Board Switches and Jumpers ++1.0 There are five Dual-In-Line Packages(DIP) Switches on MPC832XE SYS board ++ For some reason, the HW designers describe the switch settings ++ in terms of 0 and 1, and then map that to physical switches where ++ the label "On" refers to logic 0 and "Off" is logic 1. ++ ++ Switch bits are numbered 1 through, like, 4 6 8 or 10, but the ++ bits may contribute to signals that are numbered based at 0, ++ and some of those signals may be high-bit-number-0 too. Heed ++ well the names and labels and do not get confused. ++ ++ "Off" == 1 ++ "On" == 0 ++ ++ SW3 is switch 18 as silk-screened onto the board. ++ SW4[8] is the bit labled 8 on Switch 4. ++ SW5[1:6] refers to bits labeled 1 through 6 in order on switch 5. ++ SW6[7:1] refers to bits labeled 7 through 1 in order on switch 6. ++ SW7[1:8]= 0000_0001 refers to bits labeled 1 through 6 is set as "On" ++ and bits labeled 8 is set as "Off". ++ ++1.1 For the MPC832XEMDS PROTO Board ++ ++ First, make sure the board default setting is consistent with the ++ document shipped with your board. Then apply the following setting: ++ SW3[1-8]= 0000_1000 (core PLL setting, core enable) ++ SW4[1-8]= 0001_0010 (Flash boot on local bus, system PLL setting) ++ SW5[1-8]= 0010_0110 (Boot from high end) ++ SW6[1-8]= 0011_0100 (Flash boot on 16 bit local bus) ++ SW7[1-8]= 1000_0011 (QE PLL setting) ++ ++ ENET3/4 MII mode settings: ++ J1 1-2 (ETH3_TXER) ++ J2 2-3 (MII mode) ++ J3 2-3 (MII mode) ++ J4 2-3 (ADSL clockOscillator) ++ J5 1-2 (ETH4_TXER) ++ J6 2-3 (ClockOscillator) ++ JP1 removed (don't force PORESET) ++ JP2 mounted (ETH4/2 MII) ++ JP3 mounted (ETH3 MII) ++ JP4 mounted (HRCW from BCSR) ++ ++ ENET3/4 RMII mode settings: ++ J1 1-2 (ETH3_TXER) ++ J2 1-2 (RMII mode) ++ J3 1-2 (RMII mode) ++ J4 2-3 (ADSL clockOscillator) ++ J5 1-2 (ETH4_TXER) ++ J6 2-3 (ClockOscillator) ++ JP1 removed (don't force PORESET) ++ JP2 removed (ETH4/2 RMII) ++ JP3 removed (ETH3 RMII) ++ JP4 removed (HRCW from FLASH) ++ ++ on board Oscillator: 66M ++ ++ ++2. Memory Map ++ ++2.1 The memory map should look pretty much like this: ++ ++ 0x0000_0000 0x7fff_ffff DDR 2G ++ 0x8000_0000 0x8fff_ffff PCI MEM prefetch 256M ++ 0x9000_0000 0x9fff_ffff PCI MEM non-prefetch 256M ++ 0xc000_0000 0xdfff_ffff Empty 512M ++ 0xe000_0000 0xe01f_ffff Int Mem Reg Space 2M ++ 0xe020_0000 0xe02f_ffff Empty 1M ++ 0xe030_0000 0xe03f_ffff PCI IO 1M ++ 0xe040_0000 0xefff_ffff Empty 252M ++ 0xf400_0000 0xf7ff_ffff Empty 64M ++ 0xf800_0000 0xf800_7fff BCSR on CS1 32K ++ 0xf800_8000 0xf800_ffff PIB CS2 32K ++ 0xf801_0000 0xf801_7fff PIB CS3 32K ++ 0xfe00_0000 0xfeff_ffff FLASH on CS0 16M ++ ++ ++3. Definitions ++ ++3.1 Explanation of NEW definitions in: ++ ++ include/configs/MPC832XEMDS.h ++ ++ CONFIG_MPC83XX MPC83XX family for MPC8349, MPC8360 and MPC832X ++ CONFIG_MPC832X MPC832X specific ++ CONFIG_MPC832XEMDS MPC832XEMDS board specific ++ ++4. Compilation ++ ++ Assuming you're using BASH shell: ++ ++ export CROSS_COMPILE=your-cross-compile-prefix ++ cd u-boot ++ make distclean ++ make MPC832XEMDS_config ++ make ++ ++ MPC832X support PCI 33MHz and PCI 66MHz, to make u-boot support PCI: ++ ++ 1)Make sure the DIP SW support PCI mode ++ as described in Section 1.1. ++ ++ 2)To Make U-Boot image support PCI 33MHz, use ++ Make MPC832XEMDS_HOST_33_config ++ ++ 3)To Make U-Boot image support PCI 66MHz, use ++ Make MPC832XEMDS_HOST_66_config ++ ++5. Downloading and Flashing Images ++ ++5.0 Download over network: ++ ++ tftp 20000 u-boot.bin ++ ++5.1 Reflash U-boot Image using U-boot ++ ++ If your current u-boot sets $filesize automatically: ++ ++ protect off fe000000 +$filesize ++ erase fe000000 +$filesize ++ cp.b 20000 fe000000 $filesize ++ diff --git a/packages/uboot/u-boot-1.1.6/u-boot-1.1.6-fsl-1-Added-MPC8323E-RDB-board-support-2.patch b/packages/uboot/u-boot-1.1.6/u-boot-1.1.6-fsl-1-Added-MPC8323E-RDB-board-support-2.patch new file mode 100644 index 0000000000..23a9717e74 --- /dev/null +++ b/packages/uboot/u-boot-1.1.6/u-boot-1.1.6-fsl-1-Added-MPC8323E-RDB-board-support-2.patch @@ -0,0 +1,1221 @@ +7a328e85f4ff0b6c074a7fdb302e6e6f6f36e7f2 +diff --git a/Makefile b/Makefile +index d172411..73014fd 100644 +--- a/Makefile ++++ b/Makefile +@@ -1645,6 +1645,12 @@ MPC832XEMDS_SLAVE_config: unconfig + fi ; + @$(MKCONFIG) -a MPC832XEMDS ppc mpc83xx mpc832xemds + ++MPC8323ERDB_config: unconfig ++ @echo "" >include/config.h ; \ ++ echo -n "... PCI HOST " ; \ ++ echo "#define CONFIG_PCI" >>include/config.h ; ++ @$(MKCONFIG) -a MPC8323ERDB ppc mpc83xx mpc8323erdb ++ + ######################################################################### + ## MPC85xx Systems + ######################################################################### +diff --git a/board/mpc8323erdb/Makefile b/board/mpc8323erdb/Makefile +new file mode 100644 +index 0000000..5ec7a87 +--- /dev/null ++++ b/board/mpc8323erdb/Makefile +@@ -0,0 +1,50 @@ ++# ++# (C) Copyright 2006 ++# Wolfgang Denk, DENX Software Engineering, wd@denx.de. ++# ++# See file CREDITS for list of people who contributed to this ++# project. ++# ++# This program is free software; you can redistribute it and/or ++# modify it under the terms of the GNU General Public License as ++# published by the Free Software Foundation; either version 2 of ++# the License, or (at your option) any later version. ++# ++# This program is distributed in the hope that it will be useful, ++# but WITHOUT ANY WARRANTY; without even the implied warranty of ++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++# GNU General Public License for more details. ++# ++# You should have received a copy of the GNU General Public License ++# along with this program; if not, write to the Free Software ++# Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++# MA 02111-1307 USA ++# ++ ++include $(TOPDIR)/config.mk ++ ++LIB = $(obj)lib$(BOARD).a ++ ++COBJS := $(BOARD).o pci.o ++ ++SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) ++OBJS := $(addprefix $(obj),$(COBJS)) ++SOBJS := $(addprefix $(obj),$(SOBJS)) ++ ++$(LIB): $(obj).depend $(OBJS) ++ $(AR) $(ARFLAGS) $@ $(OBJS) ++ ++clean: ++ rm -f $(SOBJS) $(OBJS) ++ ++distclean: clean ++ rm -f $(LIB) core *.bak .depend ++ ++######################################################################### ++ ++# defines $(obj).depend target ++include $(SRCTREE)/rules.mk ++ ++sinclude $(obj).depend ++ ++######################################################################### +diff --git a/board/mpc8323erdb/config.mk b/board/mpc8323erdb/config.mk +new file mode 100644 +index 0000000..fe0d37d +--- /dev/null ++++ b/board/mpc8323erdb/config.mk +@@ -0,0 +1,28 @@ ++# ++# (C) Copyright 2006 ++# Wolfgang Denk, DENX Software Engineering, wd@denx.de. ++# ++# See file CREDITS for list of people who contributed to this ++# project. ++# ++# This program is free software; you can redistribute it and/or ++# modify it under the terms of the GNU General Public License as ++# published by the Free Software Foundation; either version 2 of ++# the License, or (at your option) any later version. ++# ++# This program is distributed in the hope that it will be useful, ++# but WITHOUT ANY WARRANTY; without even the implied warranty of ++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++# GNU General Public License for more details. ++# ++# You should have received a copy of the GNU General Public License ++# along with this program; if not, write to the Free Software ++# Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++# MA 02111-1307 USA ++# ++ ++# ++# MPC8323ERDB ++# ++ ++TEXT_BASE = 0xFE000000 +diff --git a/board/mpc8323erdb/mpc8323erdb.c b/board/mpc8323erdb/mpc8323erdb.c +new file mode 100644 +index 0000000..239adbb +--- /dev/null ++++ b/board/mpc8323erdb/mpc8323erdb.c +@@ -0,0 +1,169 @@ ++/* ++ * Copyright (C) 2006 Freescale Semiconductor, Inc. ++ * ++ * Michael Barkowski <michael.barkowski@freescale.com> ++ * Based on mpc832xmds file by Dave Liu <daveliu@freescale.com> ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ */ ++ ++#include <common.h> ++#include <ioports.h> ++#include <mpc83xx.h> ++#include <i2c.h> ++#include <spd.h> ++#include <miiphy.h> ++#include <command.h> ++#if defined(CONFIG_PCI) ++#include <pci.h> ++#endif ++#if defined(CONFIG_SPD_EEPROM) ++#include <spd_sdram.h> ++#else ++#include <asm/mmu.h> ++#endif ++#if defined(CONFIG_OF_FLAT_TREE) ++#include <ft_build.h> ++#endif ++ ++const qe_iop_conf_t qe_iop_conf_tab[] = { ++ /* UCC3 */ ++ {1, 0, 1, 0, 1}, /* TxD0 */ ++ {1, 1, 1, 0, 1}, /* TxD1 */ ++ {1, 2, 1, 0, 1}, /* TxD2 */ ++ {1, 3, 1, 0, 1}, /* TxD3 */ ++ {1, 9, 1, 0, 1}, /* TxER */ ++ {1, 12, 1, 0, 1}, /* TxEN */ ++ {3, 24, 2, 0, 1}, /* TxCLK->CLK10 */ ++ ++ {1, 4, 2, 0, 1}, /* RxD0 */ ++ {1, 5, 2, 0, 1}, /* RxD1 */ ++ {1, 6, 2, 0, 1}, /* RxD2 */ ++ {1, 7, 2, 0, 1}, /* RxD3 */ ++ {1, 8, 2, 0, 1}, /* RxER */ ++ {1, 10, 2, 0, 1}, /* RxDV */ ++ {0, 13, 2, 0, 1}, /* RxCLK->CLK9 */ ++ {1, 11, 2, 0, 1}, /* COL */ ++ {1, 13, 2, 0, 1}, /* CRS */ ++ ++ /* UCC2 */ ++ {0, 18, 1, 0, 1}, /* TxD0 */ ++ {0, 19, 1, 0, 1}, /* TxD1 */ ++ {0, 20, 1, 0, 1}, /* TxD2 */ ++ {0, 21, 1, 0, 1}, /* TxD3 */ ++ {0, 27, 1, 0, 1}, /* TxER */ ++ {0, 30, 1, 0, 1}, /* TxEN */ ++ {3, 23, 2, 0, 1}, /* TxCLK->CLK3 */ ++ ++ {0, 22, 2, 0, 1}, /* RxD0 */ ++ {0, 23, 2, 0, 1}, /* RxD1 */ ++ {0, 24, 2, 0, 1}, /* RxD2 */ ++ {0, 25, 2, 0, 1}, /* RxD3 */ ++ {0, 26, 1, 0, 1}, /* RxER */ ++ {0, 28, 2, 0, 1}, /* Rx_DV */ ++ {3, 21, 2, 0, 1}, /* RxCLK->CLK16 */ ++ {0, 29, 2, 0, 1}, /* COL */ ++ {0, 31, 2, 0, 1}, /* CRS */ ++ ++ {3, 4, 3, 0, 2}, /* MDIO */ ++ {3, 5, 1, 0, 2}, /* MDC */ ++ ++ {0, 0, 0, 0, QE_IOP_TAB_END}, /* END of table */ ++}; ++ ++int board_early_init_f(void) ++{ ++ return 0; ++} ++ ++int fixed_sdram(void); ++ ++long int initdram(int board_type) ++{ ++ volatile immap_t *im = (immap_t *) CFG_IMMR; ++ u32 msize = 0; ++ ++ if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32) im) ++ return -1; ++ ++ /* DDR SDRAM - Main SODIMM */ ++ im->sysconf.ddrlaw[0].bar = CFG_DDR_BASE & LAWBAR_BAR; ++ ++ msize = fixed_sdram(); ++ ++ puts("\n DDR RAM: "); ++ ++ /* return total bus SDRAM size(bytes) -- DDR */ ++ return (msize * 1024 * 1024); ++} ++ ++/************************************************************************* ++ * fixed sdram init -- doesn't use serial presence detect. ++ ************************************************************************/ ++int fixed_sdram(void) ++{ ++ volatile immap_t *im = (immap_t *) CFG_IMMR; ++ u32 msize = 0; ++ u32 ddr_size; ++ u32 ddr_size_log2; ++ ++ msize = CFG_DDR_SIZE; ++ for (ddr_size = msize << 20, ddr_size_log2 = 0; ++ (ddr_size > 1); ddr_size = ddr_size >> 1, ddr_size_log2++) { ++ if (ddr_size & 1) { ++ return -1; ++ } ++ } ++ im->sysconf.ddrlaw[0].ar = ++ LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE); ++ im->ddr.sdram_clk_cntl = CFG_DDR_CLK_CNTL; ++ im->ddr.csbnds[0].csbnds = CFG_DDR_CS0_BNDS; ++ im->ddr.cs_config[0] = CFG_DDR_CS0_CONFIG; ++ im->ddr.timing_cfg_0 = CFG_DDR_TIMING_0; ++ im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1; ++ im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2; ++ im->ddr.timing_cfg_3 = CFG_DDR_TIMING_3; ++ im->ddr.sdram_cfg = CFG_DDR_SDRAM_CFG; ++ im->ddr.sdram_cfg2 = CFG_DDR_SDRAM_CFG2; ++ im->ddr.sdram_mode = CFG_DDR_MODE; ++ im->ddr.sdram_mode2 = CFG_DDR_MODE2; ++ im->ddr.sdram_interval = CFG_DDR_INTERVAL; ++ __asm__ __volatile__ ("sync"); ++ udelay(200); ++ ++ im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN; ++ __asm__ __volatile__ ("sync"); ++ return msize; ++} ++ ++int checkboard(void) ++{ ++ puts("Board: Freescale MPC8323ERDB\n"); ++ return 0; ++} ++ ++#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP) ++void ++ft_board_setup(void *blob, bd_t *bd) ++{ ++ u32 *p; ++ int len; ++ ++#ifdef CONFIG_PCI ++ ft_pci_setup(blob, bd); ++#endif ++ ft_cpu_setup(blob, bd); ++ ++ p = ft_get_prop(blob, "/memory/reg", &len); ++ if (p != NULL) { ++ *p++ = cpu_to_be32(bd->bi_memstart); ++ *p = cpu_to_be32(bd->bi_memsize); ++ } ++} ++#endif +diff --git a/board/mpc8323erdb/pci.c b/board/mpc8323erdb/pci.c +new file mode 100644 +index 0000000..2e942d2 +--- /dev/null ++++ b/board/mpc8323erdb/pci.c +@@ -0,0 +1,208 @@ ++/* ++ * Copyright (C) 2006 Freescale Semiconductor, Inc. ++ * ++ * Michael Barkowski <michael.barkowski@freescale.com> ++ * Based on mpc832xemds/pci.c by Dave Liu. ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ */ ++ ++/* ++ * PCI Configuration space access support for MPC83xx PCI Bridge ++ */ ++#include <asm/mmu.h> ++#include <asm/io.h> ++#include <common.h> ++#include <pci.h> ++#include <i2c.h> ++ ++#include <asm/fsl_i2c.h> ++ ++DECLARE_GLOBAL_DATA_PTR; ++ ++#if defined(CONFIG_PCI) ++#define PCI_FUNCTION_CONFIG 0x44 ++#define PCI_FUNCTION_CFG_LOCK 0x20 ++ ++/* ++ * Initialize PCI Devices, report devices found ++ */ ++#ifndef CONFIG_PCI_PNP ++static struct pci_config_table pci_mpc8323erdb_config_table[] = { ++ { ++ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, ++ pci_cfgfunc_config_device, ++ {PCI_ENET0_IOADDR, ++ PCI_ENET0_MEMADDR, ++ PCI_COMMON_MEMORY | PCI_COMMAND_MASTER} ++ }, ++ {} ++} ++#endif ++static struct pci_controller hose[] = { ++ { ++#ifndef CONFIG_PCI_PNP ++ config_table:pci_mpc8323erdb_config_table, ++#endif ++ }, ++}; ++ ++/********************************************************************** ++ * pci_init_board() ++ *********************************************************************/ ++void pci_init_board(void) ++{ ++ volatile immap_t *immr; ++ volatile clk83xx_t *clk; ++ volatile law83xx_t *pci_law; ++ volatile pot83xx_t *pci_pot; ++ volatile pcictrl83xx_t *pci_ctrl; ++ volatile pciconf83xx_t *pci_conf; ++ ++ u8 val8; ++ u16 reg16; ++ u32 val32; ++ u32 dev; ++ ++ immr = (immap_t *) CFG_IMMR; ++ clk = (clk83xx_t *) & immr->clk; ++ pci_law = immr->sysconf.pcilaw; ++ pci_pot = immr->ios.pot; ++ pci_ctrl = immr->pci_ctrl; ++ pci_conf = immr->pci_conf; ++ /* ++ * Enable PCI output signals ++ */ ++ val32 = clk->occr; ++ udelay(2000); ++ /* if pin /CFG_CLKIN_DIV=1, PCI clock = clkin = 66MHz; ++ if pin /CFG_CLKIN_DIV=0, PCI clock = clkin/2 = 33MHz; */ ++ clk->occr = OCCR_PCICOE0 | OCCR_PCICOE1 | OCCR_PCICOE2; ++ if (clk->spmr & SPMR_CKID) ++ printf("PCI clock is 33MHz\n"); ++ else ++ printf("PCI clock is 66MHz\n"); ++ udelay(2000); ++ ++ /* ++ * Configure PCI Local Access Windows ++ */ ++ pci_law[0].bar = CFG_PCI_MEM_PHYS & LAWBAR_BAR; ++ pci_law[0].ar = LAWAR_EN | LAWAR_SIZE_512M; ++ ++ pci_law[1].bar = CFG_PCI_IO_PHYS & LAWBAR_BAR; ++ pci_law[1].ar = LAWAR_EN | LAWAR_SIZE_1M; ++ ++ /* ++ * Configure PCI Outbound Translation Windows ++ */ ++ ++ /* PCI mem space - prefetch */ ++ pci_pot[0].potar = (CFG_PCI_MEM_BASE >> 12) & POTAR_TA_MASK; ++ pci_pot[0].pobar = (CFG_PCI_MEM_PHYS >> 12) & POBAR_BA_MASK; ++ pci_pot[0].pocmr = ++ POCMR_EN | POCMR_SE | (POCMR_CM_256M & POCMR_CM_MASK); ++ ++ /* PCI mmio - non-prefetch mem space */ ++ pci_pot[1].potar = (CFG_PCI_MMIO_BASE >> 12) & POTAR_TA_MASK; ++ pci_pot[1].pobar = (CFG_PCI_MMIO_PHYS >> 12) & POBAR_BA_MASK; ++ pci_pot[1].pocmr = POCMR_EN | (POCMR_CM_256M & POCMR_CM_MASK); ++ ++ /* PCI IO space */ ++ pci_pot[2].potar = (CFG_PCI_IO_BASE >> 12) & POTAR_TA_MASK; ++ pci_pot[2].pobar = (CFG_PCI_IO_PHYS >> 12) & POBAR_BA_MASK; ++ pci_pot[2].pocmr = POCMR_EN | POCMR_IO | (POCMR_CM_1M & POCMR_CM_MASK); ++ ++ /* ++ * Configure PCI Inbound Translation Windows ++ */ ++ pci_ctrl[0].pitar1 = (CFG_PCI_SLV_MEM_LOCAL >> 12) & PITAR_TA_MASK; ++ pci_ctrl[0].pibar1 = (CFG_PCI_SLV_MEM_BUS >> 12) & PIBAR_MASK; ++ pci_ctrl[0].piebar1 = 0x0; ++ pci_ctrl[0].piwar1 = ++ PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP | PIWAR_WTT_SNOOP | ++ PIWAR_IWS_2G; ++ ++ /* ++ * Release PCI RST Output signal ++ */ ++ udelay(2000); ++ pci_ctrl[0].gcr = 1; ++ udelay(2000); ++ ++ hose[0].first_busno = 0; ++ hose[0].last_busno = 0xff; ++ ++ /* PCI memory prefetch space */ ++ pci_set_region(hose[0].regions + 0, ++ CFG_PCI_MEM_BASE, ++ CFG_PCI_MEM_PHYS, ++ CFG_PCI_MEM_SIZE, PCI_REGION_MEM | PCI_REGION_PREFETCH); ++ ++ /* PCI memory space */ ++ pci_set_region(hose[0].regions + 1, ++ CFG_PCI_MMIO_BASE, ++ CFG_PCI_MMIO_PHYS, CFG_PCI_MMIO_SIZE, PCI_REGION_MEM); ++ ++ /* PCI IO space */ ++ pci_set_region(hose[0].regions + 2, ++ CFG_PCI_IO_BASE, ++ CFG_PCI_IO_PHYS, CFG_PCI_IO_SIZE, PCI_REGION_IO); ++ ++ /* System memory space */ ++ pci_set_region(hose[0].regions + 3, ++ CFG_PCI_SLV_MEM_LOCAL, ++ CFG_PCI_SLV_MEM_BUS, ++ CFG_PCI_SLV_MEM_SIZE, ++ PCI_REGION_MEM | PCI_REGION_MEMORY); ++ ++ hose[0].region_count = 4; ++ ++ pci_setup_indirect(&hose[0], ++ (CFG_IMMR + 0x8300), (CFG_IMMR + 0x8304)); ++ ++ pci_register_hose(hose); ++ ++ /* ++ * Write command register ++ */ ++ reg16 = 0xff; ++ dev = PCI_BDF(0, 0, 0); ++ pci_hose_read_config_word(&hose[0], dev, PCI_COMMAND, ®16); ++ reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; ++ pci_hose_write_config_word(&hose[0], dev, PCI_COMMAND, reg16); ++ ++ /* ++ * Clear non-reserved bits in status register. ++ */ ++ pci_hose_write_config_word(&hose[0], dev, PCI_STATUS, 0xffff); ++ pci_hose_write_config_byte(&hose[0], dev, PCI_LATENCY_TIMER, 0x80); ++ pci_hose_write_config_byte(&hose[0], dev, PCI_CACHE_LINE_SIZE, 0x08); ++ ++ /* ++ * Hose scan. ++ */ ++ hose->last_busno = pci_hose_scan(hose); ++} ++ ++#ifdef CONFIG_OF_FLAT_TREE ++void ++ft_pci_setup(void *blob, bd_t *bd) ++{ ++ u32 *p; ++ int len; ++ ++ p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@8500/bus-range", &len); ++ if (p != NULL) { ++ p[0] = hose[0].first_busno; ++ p[1] = hose[0].last_busno; ++ } ++} ++#endif /* CONFIG_OF_FLAT_TREE */ ++#endif /* CONFIG_PCI */ +diff --git a/board/mpc8323erdb/u-boot.lds b/board/mpc8323erdb/u-boot.lds +new file mode 100644 +index 0000000..937c87a +--- /dev/null ++++ b/board/mpc8323erdb/u-boot.lds +@@ -0,0 +1,123 @@ ++/* ++ * (C) Copyright 2006 ++ * Wolfgang Denk, DENX Software Engineering, wd@denx.de. ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++OUTPUT_ARCH(powerpc) ++SECTIONS ++{ ++ /* Read-only sections, merged into text segment: */ ++ . = + SIZEOF_HEADERS; ++ .interp : { *(.interp) } ++ .hash : { *(.hash) } ++ .dynsym : { *(.dynsym) } ++ .dynstr : { *(.dynstr) } ++ .rel.text : { *(.rel.text) } ++ .rela.text : { *(.rela.text) } ++ .rel.data : { *(.rel.data) } ++ .rela.data : { *(.rela.data) } ++ .rel.rodata : { *(.rel.rodata) } ++ .rela.rodata : { *(.rela.rodata) } ++ .rel.got : { *(.rel.got) } ++ .rela.got : { *(.rela.got) } ++ .rel.ctors : { *(.rel.ctors) } ++ .rela.ctors : { *(.rela.ctors) } ++ .rel.dtors : { *(.rel.dtors) } ++ .rela.dtors : { *(.rela.dtors) } ++ .rel.bss : { *(.rel.bss) } ++ .rela.bss : { *(.rela.bss) } ++ .rel.plt : { *(.rel.plt) } ++ .rela.plt : { *(.rela.plt) } ++ .init : { *(.init) } ++ .plt : { *(.plt) } ++ .text : ++ { ++ cpu/mpc83xx/start.o (.text) ++ *(.text) ++ *(.fixup) ++ *(.got1) ++ . = ALIGN(16); ++ *(.rodata) ++ *(.rodata1) ++ *(.rodata.str1.4) ++ *(.eh_frame) ++ } ++ .fini : { *(.fini) } =0 ++ .ctors : { *(.ctors) } ++ .dtors : { *(.dtors) } ++ ++ /* Read-write section, merged into data segment: */ ++ . = (. + 0x0FFF) & 0xFFFFF000; ++ _erotext = .; ++ PROVIDE (erotext = .); ++ .reloc : ++ { ++ *(.got) ++ _GOT2_TABLE_ = .; ++ *(.got2) ++ _FIXUP_TABLE_ = .; ++ *(.fixup) ++ } ++ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2; ++ __fixup_entries = (. - _FIXUP_TABLE_) >> 2; ++ ++ .data : ++ { ++ *(.data) ++ *(.data1) ++ *(.sdata) ++ *(.sdata2) ++ *(.dynamic) ++ CONSTRUCTORS ++ } ++ _edata = .; ++ PROVIDE (edata = .); ++ ++ . = .; ++ __u_boot_cmd_start = .; ++ .u_boot_cmd : { *(.u_boot_cmd) } ++ __u_boot_cmd_end = .; ++ ++ ++ . = .; ++ __start___ex_table = .; ++ __ex_table : { *(__ex_table) } ++ __stop___ex_table = .; ++ ++ . = ALIGN(4096); ++ __init_begin = .; ++ .text.init : { *(.text.init) } ++ .data.init : { *(.data.init) } ++ . = ALIGN(4096); ++ __init_end = .; ++ ++ __bss_start = .; ++ .bss : ++ { ++ *(.sbss) *(.scommon) ++ *(.dynbss) ++ *(.bss) ++ *(COMMON) ++ } ++ _end = . ; ++ PROVIDE (end = .); ++} ++ENTRY(_start) +diff --git a/include/configs/MPC8323ERDB.h b/include/configs/MPC8323ERDB.h +new file mode 100644 +index 0000000..ebbc7b0 +--- /dev/null ++++ b/include/configs/MPC8323ERDB.h +@@ -0,0 +1,589 @@ ++/* ++ * Copyright (C) 2006 Freescale Semiconductor, Inc. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#ifndef __CONFIG_H ++#define __CONFIG_H ++ ++#undef DEBUG ++ ++/* ++ * High Level Configuration Options ++ */ ++#define CONFIG_E300 1 /* E300 family */ ++#define CONFIG_QE 1 /* Has QE */ ++#define CONFIG_MPC83XX 1 /* MPC83xx family */ ++#define CONFIG_MPC832X 1 /* MPC832x CPU specific */ ++ ++/* ++ * System Clock Setup ++ */ ++#define CONFIG_83XX_CLKIN 66666667 /* in Hz */ ++ ++#ifndef CONFIG_SYS_CLK_FREQ ++#define CONFIG_SYS_CLK_FREQ 66666667 ++#endif ++ ++/* ++ * Hardware Reset Configuration Word ++ */ ++#define CFG_HRCW_LOW (\ ++ HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\ ++ HRCWL_DDR_TO_SCB_CLK_2X1 |\ ++ HRCWL_VCO_1X2 |\ ++ HRCWL_CSB_TO_CLKIN_2X1 |\ ++ HRCWL_CORE_TO_CSB_2_5X1 |\ ++ HRCWL_CE_PLL_VCO_DIV_2 |\ ++ HRCWL_CE_PLL_DIV_1X1 |\ ++ HRCWL_CE_TO_PLL_1X3) ++ ++#define CFG_HRCW_HIGH (\ ++ HRCWH_PCI_HOST |\ ++ HRCWH_PCI1_ARBITER_ENABLE |\ ++ HRCWH_CORE_ENABLE |\ ++ HRCWH_FROM_0X00000100 |\ ++ HRCWH_BOOTSEQ_DISABLE |\ ++ HRCWH_SW_WATCHDOG_DISABLE |\ ++ HRCWH_ROM_LOC_LOCAL_16BIT |\ ++ HRCWH_BIG_ENDIAN |\ ++ HRCWH_LALE_NORMAL) ++ ++/* ++ * System IO Config ++ */ ++#define CFG_SICRL 0x00000000 ++ ++#define CONFIG_BOARD_EARLY_INIT_F /* call board_pre_init */ ++ ++/* ++ * IMMR new address ++ */ ++#define CFG_IMMR 0xE0000000 ++ ++/* ++ * DDR Setup ++ */ ++#define CFG_DDR_BASE 0x00000000 /* DDR is system memory */ ++#define CFG_SDRAM_BASE CFG_DDR_BASE ++#define CFG_DDR_SDRAM_BASE CFG_DDR_BASE ++#define CFG_DDRCDR 0x73000002 /* DDR II voltage is 1.8V */ ++ ++#undef CONFIG_SPD_EEPROM ++#if defined(CONFIG_SPD_EEPROM) ++/* Determine DDR configuration from I2C interface ++ */ ++#define SPD_EEPROM_ADDRESS 0x51 /* DDR SODIMM */ ++#else ++/* Manually set up DDR parameters ++ */ ++#define CFG_DDR_SIZE 64 /* MB */ ++#define CFG_DDR_CS0_CONFIG 0x80840101 ++#define CFG_DDR_TIMING_0 0x00220802 ++#define CFG_DDR_TIMING_1 0x3935d322 ++#define CFG_DDR_TIMING_2 0x0f9048ca ++#define CFG_DDR_TIMING_3 0x00000000 ++#define CFG_DDR_CLK_CNTL 0x02000000 ++#define CFG_DDR_MODE 0x44400232 ++#define CFG_DDR_MODE2 0x8000c000 ++#define CFG_DDR_INTERVAL 0x03200064 ++#define CFG_DDR_CS0_BNDS 0x00000003 ++#define CFG_DDR_SDRAM_CFG 0x43080000 ++#define CFG_DDR_SDRAM_CFG2 0x00401000 ++#endif ++ ++/* ++ * Memory test ++ */ ++#undef CFG_DRAM_TEST /* memory test, takes time */ ++#define CFG_MEMTEST_START 0x00030000 /* memtest region */ ++#define CFG_MEMTEST_END 0x03f00000 ++ ++/* ++ * The reserved memory ++ */ ++#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */ ++ ++#if (CFG_MONITOR_BASE < CFG_FLASH_BASE) ++#define CFG_RAMBOOT ++#else ++#undef CFG_RAMBOOT ++#endif ++ ++#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ ++#define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */ ++ ++/* ++ * Initial RAM Base Address Setup ++ */ ++#define CFG_INIT_RAM_LOCK 1 ++#define CFG_INIT_RAM_ADDR 0xE6000000 /* Initial RAM address */ ++#define CFG_INIT_RAM_END 0x1000 /* End of used area in RAM */ ++#define CFG_GBL_DATA_SIZE 0x100 /* num bytes initial data */ ++#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) ++ ++/* ++ * Local Bus Configuration & Clock Setup ++ */ ++#define CFG_LCRR (LCRR_DBYP | LCRR_CLKDIV_2) ++#define CFG_LBC_LBCR 0x00000000 ++ ++/* ++ * FLASH on the Local Bus ++ */ ++#define CFG_FLASH_CFI /* use the Common Flash Interface */ ++#define CFG_FLASH_CFI_DRIVER /* use the CFI driver */ ++#define CFG_FLASH_BASE 0xFE000000 /* FLASH base address */ ++#define CFG_FLASH_SIZE 16 /* FLASH size is 16M */ ++ ++#define CFG_LBLAWBAR0_PRELIM CFG_FLASH_BASE /* Window base at flash base */ ++#define CFG_LBLAWAR0_PRELIM 0x80000018 /* 32MB window size */ ++ ++#define CFG_BR0_PRELIM (CFG_FLASH_BASE | /* Flash Base address */ \ ++ (2 << BR_PS_SHIFT) | /* 16 bit port size */ \ ++ BR_V) /* valid */ ++#define CFG_OR0_PRELIM 0xfe006ff7 /* 16MB Flash size */ ++ ++#define CFG_MAX_FLASH_BANKS 1 /* number of banks */ ++#define CFG_MAX_FLASH_SECT 128 /* sectors per device */ ++ ++#undef CFG_FLASH_CHECKSUM ++ ++/* ++ * SDRAM on the Local Bus ++ */ ++#undef CFG_LB_SDRAM /* The board has not SRDAM on local bus */ ++ ++#ifdef CFG_LB_SDRAM ++#define CFG_LBC_SDRAM_BASE 0xF0000000 /* SDRAM base address */ ++#define CFG_LBC_SDRAM_SIZE 64 /* LBC SDRAM is 64MB */ ++ ++#define CFG_LBLAWBAR2_PRELIM CFG_LBC_SDRAM_BASE ++#define CFG_LBLAWAR2_PRELIM 0x80000019 /* 64MB */ ++ ++/*local bus BR2, OR2 definition for SDRAM if soldered on the EPB board */ ++/* ++ * Base Register 2 and Option Register 2 configure SDRAM. ++ * The SDRAM base address, CFG_LBC_SDRAM_BASE, is 0xf0000000. ++ * ++ * For BR2, need: ++ * Base address of 0xf0000000 = BR[0:16] = 1111 0000 0000 0000 0 ++ * port size = 32-bits = BR2[19:20] = 11 ++ * no parity checking = BR2[21:22] = 00 ++ * SDRAM for MSEL = BR2[24:26] = 011 ++ * Valid = BR[31] = 1 ++ * ++ * 0 4 8 12 16 20 24 28 ++ * 1111 0000 0000 0000 0001 1000 0110 0001 = f0001861 ++ * ++ * CFG_LBC_SDRAM_BASE should be masked and OR'ed into ++ * the top 17 bits of BR2. ++ */ ++ ++#define CFG_BR2_PRELIM 0xf0001861 /*Port size=32bit, MSEL=SDRAM */ ++ ++/* ++ * The SDRAM size in MB, CFG_LBC_SDRAM_SIZE, is 64. ++ * ++ * For OR2, need: ++ * 64MB mask for AM, OR2[0:7] = 1111 1100 ++ * XAM, OR2[17:18] = 11 ++ * 9 columns OR2[19-21] = 010 ++ * 13 rows OR2[23-25] = 100 ++ * EAD set for extra time OR[31] = 1 ++ * ++ * 0 4 8 12 16 20 24 28 ++ * 1111 1100 0000 0000 0110 1001 0000 0001 = fc006901 ++ */ ++ ++#define CFG_OR2_PRELIM 0xfc006901 ++ ++#define CFG_LBC_LSRT 0x32000000 /* LB sdram refresh timer, about 6us */ ++#define CFG_LBC_MRTPR 0x20000000 /* LB refresh timer prescal, 266MHz/32 */ ++ ++/* ++ * LSDMR masks ++ */ ++#define CFG_LBC_LSDMR_OP_NORMAL (0 << (31 - 4)) ++#define CFG_LBC_LSDMR_OP_ARFRSH (1 << (31 - 4)) ++#define CFG_LBC_LSDMR_OP_SRFRSH (2 << (31 - 4)) ++#define CFG_LBC_LSDMR_OP_MRW (3 << (31 - 4)) ++#define CFG_LBC_LSDMR_OP_PRECH (4 << (31 - 4)) ++#define CFG_LBC_LSDMR_OP_PCHALL (5 << (31 - 4)) ++#define CFG_LBC_LSDMR_OP_ACTBNK (6 << (31 - 4)) ++#define CFG_LBC_LSDMR_OP_RWINV (7 << (31 - 4)) ++ ++#define CFG_LBC_LSDMR_COMMON 0x0063b723 ++ ++/* ++ * SDRAM Controller configuration sequence. ++ */ ++#define CFG_LBC_LSDMR_1 ( CFG_LBC_LSDMR_COMMON \ ++ | CFG_LBC_LSDMR_OP_PCHALL) ++#define CFG_LBC_LSDMR_2 ( CFG_LBC_LSDMR_COMMON \ ++ | CFG_LBC_LSDMR_OP_ARFRSH) ++#define CFG_LBC_LSDMR_3 ( CFG_LBC_LSDMR_COMMON \ ++ | CFG_LBC_LSDMR_OP_ARFRSH) ++#define CFG_LBC_LSDMR_4 ( CFG_LBC_LSDMR_COMMON \ ++ | CFG_LBC_LSDMR_OP_MRW) ++#define CFG_LBC_LSDMR_5 ( CFG_LBC_LSDMR_COMMON \ ++ | CFG_LBC_LSDMR_OP_NORMAL) ++ ++#endif ++ ++/* ++ * Windows to access PIB via local bus ++ */ ++#define CFG_LBLAWBAR3_PRELIM 0xf8008000 /* windows base 0xf8008000 */ ++#define CFG_LBLAWAR3_PRELIM 0x8000000f /* windows size 64KB */ ++ ++/* ++ * Serial Port ++ */ ++#define CONFIG_CONS_INDEX 1 ++#undef CONFIG_SERIAL_SOFTWARE_FIFO ++#define CFG_NS16550 ++#define CFG_NS16550_SERIAL ++#define CFG_NS16550_REG_SIZE 1 ++#define CFG_NS16550_CLK get_bus_freq(0) ++ ++#define CFG_BAUDRATE_TABLE \ ++ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200} ++ ++#define CFG_NS16550_COM1 (CFG_IMMR+0x4500) ++#define CFG_NS16550_COM2 (CFG_IMMR+0x4600) ++ ++/* Use the HUSH parser */ ++#define CFG_HUSH_PARSER ++#ifdef CFG_HUSH_PARSER ++#define CFG_PROMPT_HUSH_PS2 "> " ++#endif ++ ++/* pass open firmware flat tree */ ++#define CONFIG_OF_FLAT_TREE 1 ++#define CONFIG_OF_BOARD_SETUP 1 ++ ++/* maximum size of the flat tree (8K) */ ++#define OF_FLAT_TREE_MAX_SIZE 8192 ++ ++#define OF_CPU "PowerPC,8323@0" ++#define OF_SOC "soc8323@e0000000" ++#define OF_TBCLK (bd->bi_busfreq / 4) ++#define OF_STDOUT_PATH "/soc8323@e0000000/serial@4500" ++ ++/* I2C */ ++#define CONFIG_HARD_I2C /* I2C with hardware support */ ++#undef CONFIG_SOFT_I2C /* I2C bit-banged */ ++#define CONFIG_FSL_I2C ++#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ ++#define CFG_I2C_SLAVE 0x7F ++#define CFG_I2C_NOPROBES {0x51} /* Don't probe these addrs */ ++#define CFG_I2C_OFFSET 0x3000 ++ ++/* ++ * Config on-board RTC ++ */ ++#define CONFIG_RTC_DS1374 /* use ds1374 rtc via i2c */ ++#define CFG_I2C_RTC_ADDR 0x68 /* at address 0x68 */ ++ ++/* ++ * General PCI ++ * Addresses are mapped 1-1. ++ */ ++#define CFG_PCI_MEM_BASE 0x80000000 ++#define CFG_PCI_MEM_PHYS CFG_PCI_MEM_BASE ++#define CFG_PCI_MEM_SIZE 0x10000000 /* 256M */ ++#define CFG_PCI_MMIO_BASE 0x90000000 ++#define CFG_PCI_MMIO_PHYS CFG_PCI_MMIO_BASE ++#define CFG_PCI_MMIO_SIZE 0x10000000 /* 256M */ ++#define CFG_PCI_IO_BASE 0xd0000000 ++#define CFG_PCI_IO_PHYS CFG_PCI_IO_BASE ++#define CFG_PCI_IO_SIZE 0x04000000 /* 64M */ ++ ++#define CFG_PCI_SLV_MEM_LOCAL CFG_SDRAM_BASE ++#define CFG_PCI_SLV_MEM_BUS 0x00000000 ++#define CFG_PCI_SLV_MEM_SIZE 0x80000000 ++ ++ ++#ifdef CONFIG_PCI ++ ++#define CONFIG_NET_MULTI ++#define CONFIG_PCI_PNP /* do pci plug-and-play */ ++ ++#undef CONFIG_EEPRO100 ++#undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ ++#define CFG_PCI_SUBSYS_VENDORID 0x1957 /* Freescale */ ++ ++#endif /* CONFIG_PCI */ ++ ++ ++#ifndef CONFIG_NET_MULTI ++#define CONFIG_NET_MULTI 1 ++#endif ++ ++/* ++ * QE UEC ethernet configuration ++ */ ++#define CONFIG_UEC_ETH ++#define CONFIG_ETHPRIME "Freescale GETH" ++ ++#define CONFIG_UEC_ETH1 /* ETH3 */ ++ ++#ifdef CONFIG_UEC_ETH1 ++#define CFG_UEC1_UCC_NUM 2 /* UCC3 */ ++#define CFG_UEC1_RX_CLK QE_CLK9 ++#define CFG_UEC1_TX_CLK QE_CLK10 ++#define CFG_UEC1_ETH_TYPE FAST_ETH ++#define CFG_UEC1_PHY_ADDR 4 ++#define CFG_UEC1_INTERFACE_MODE ENET_100_MII ++#endif ++ ++#define CONFIG_UEC_ETH2 /* ETH4 */ ++ ++#ifdef CONFIG_UEC_ETH2 ++#define CFG_UEC2_UCC_NUM 1 /* UCC2 */ ++#define CFG_UEC2_RX_CLK QE_CLK16 ++#define CFG_UEC2_TX_CLK QE_CLK3 ++#define CFG_UEC2_ETH_TYPE FAST_ETH ++#define CFG_UEC2_PHY_ADDR 0 ++#define CFG_UEC2_INTERFACE_MODE ENET_100_MII ++#endif ++ ++/* ++ * Environment ++ */ ++#ifndef CFG_RAMBOOT ++ #define CFG_ENV_IS_IN_FLASH 1 ++ #define CFG_ENV_ADDR (CFG_MONITOR_BASE + 0x40000) ++ #define CFG_ENV_SECT_SIZE 0x40000 /* 256K(one sector) for env */ ++ #define CFG_ENV_SIZE 0x2000 ++#else ++ #define CFG_NO_FLASH 1 /* Flash is not usable now */ ++ #define CFG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */ ++ #define CFG_ENV_ADDR (CFG_MONITOR_BASE - 0x1000) ++ #define CFG_ENV_SIZE 0x2000 ++#endif ++ ++#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ ++#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ ++ ++#if defined(CFG_RAMBOOT) ++#if defined(CONFIG_PCI) ++#define CONFIG_COMMANDS ((CONFIG_CMD_DFL \ ++ | CFG_CMD_PING \ ++ | CFG_CMD_ASKENV \ ++ | CFG_CMD_PCI \ ++ | CFG_CMD_I2C) \ ++ & \ ++ ~(CFG_CMD_ENV \ ++ | CFG_CMD_LOADS)) ++#else ++#define CONFIG_COMMANDS ((CONFIG_CMD_DFL \ ++ | CFG_CMD_PING \ ++ | CFG_CMD_ASKENV \ ++ | CFG_CMD_I2C) \ ++ & \ ++ ~(CFG_CMD_ENV \ ++ | CFG_CMD_LOADS)) ++#endif ++#else ++#if defined(CONFIG_PCI) ++#define CONFIG_COMMANDS (CONFIG_CMD_DFL \ ++ | CFG_CMD_PCI \ ++ | CFG_CMD_PING \ ++ | CFG_CMD_ASKENV \ ++ | CFG_CMD_I2C) ++#else ++#define CONFIG_COMMANDS (CONFIG_CMD_DFL \ ++ | CFG_CMD_PING \ ++ | CFG_CMD_ASKENV \ ++ | CFG_CMD_I2C ) ++#endif ++#endif ++ ++#include <cmd_confdefs.h> ++ ++#undef CONFIG_WATCHDOG /* watchdog disabled */ ++ ++/* ++ * Miscellaneous configurable options ++ */ ++#define CFG_LONGHELP /* undef to save memory */ ++#define CFG_LOAD_ADDR 0x2000000 /* default load address */ ++#define CFG_PROMPT "=> " /* Monitor Command Prompt */ ++ ++#if (CONFIG_COMMANDS & CFG_CMD_KGDB) ++ #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ ++#else ++ #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ ++#endif ++ ++#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ ++#define CFG_MAXARGS 16 /* max number of command args */ ++#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ ++#define CFG_HZ 1000 /* decrementer freq: 1ms ticks */ ++ ++/* ++ * For booting Linux, the board info and command line data ++ * have to be in the first 8 MB of memory, since this is ++ * the maximum mapped by the Linux kernel during initialization. ++ */ ++#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ ++ ++/* ++ * Core HID Setup ++ */ ++#define CFG_HID0_INIT 0x000000000 ++#define CFG_HID0_FINAL HID0_ENABLE_MACHINE_CHECK ++#define CFG_HID2 HID2_HBE ++ ++/* ++ * Cache Config ++ */ ++#define CFG_DCACHE_SIZE 16384 ++#define CFG_CACHELINE_SIZE 32 ++#if (CONFIG_COMMANDS & CFG_CMD_KGDB) ++#define CFG_CACHELINE_SHIFT 5 /*log base 2 of the above value */ ++#endif ++ ++/* ++ * MMU Setup ++ */ ++ ++/* DDR: cache cacheable */ ++#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) ++#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) ++#define CFG_DBAT0L CFG_IBAT0L ++#define CFG_DBAT0U CFG_IBAT0U ++ ++/* IMMRBAR & PCI IO: cache-inhibit and guarded */ ++#define CFG_IBAT1L (CFG_IMMR | BATL_PP_10 | \ ++ BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) ++#define CFG_IBAT1U (CFG_IMMR | BATU_BL_4M | BATU_VS | BATU_VP) ++#define CFG_DBAT1L CFG_IBAT1L ++#define CFG_DBAT1U CFG_IBAT1U ++ ++/* FLASH: icache cacheable, but dcache-inhibit and guarded */ ++#define CFG_IBAT2L (CFG_FLASH_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) ++#define CFG_IBAT2U (CFG_FLASH_BASE | BATU_BL_32M | BATU_VS | BATU_VP) ++#define CFG_DBAT2L (CFG_FLASH_BASE | BATL_PP_10 | \ ++ BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) ++#define CFG_DBAT2U CFG_IBAT2U ++ ++#define CFG_IBAT3L (0) ++#define CFG_IBAT3U (0) ++#define CFG_DBAT3L CFG_IBAT3L ++#define CFG_DBAT3U CFG_IBAT3U ++ ++/* Stack in dcache: cacheable, no memory coherence */ ++#define CFG_IBAT4L (CFG_INIT_RAM_ADDR | BATL_PP_10) ++#define CFG_IBAT4U (CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP) ++#define CFG_DBAT4L CFG_IBAT4L ++#define CFG_DBAT4U CFG_IBAT4U ++ ++#ifdef CONFIG_PCI ++/* PCI MEM space: cacheable */ ++#define CFG_IBAT5L (CFG_PCI_MEM_PHYS | BATL_PP_10 | BATL_MEMCOHERENCE) ++#define CFG_IBAT5U (CFG_PCI_MEM_PHYS | BATU_BL_256M | BATU_VS | BATU_VP) ++#define CFG_DBAT5L CFG_IBAT5L ++#define CFG_DBAT5U CFG_IBAT5U ++/* PCI MMIO space: cache-inhibit and guarded */ ++#define CFG_IBAT6L (CFG_PCI_MMIO_PHYS | BATL_PP_10 | \ ++ BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) ++#define CFG_IBAT6U (CFG_PCI_MMIO_PHYS | BATU_BL_256M | BATU_VS | BATU_VP) ++#define CFG_DBAT6L CFG_IBAT6L ++#define CFG_DBAT6U CFG_IBAT6U ++#else ++#define CFG_IBAT5L (0) ++#define CFG_IBAT5U (0) ++#define CFG_IBAT6L (0) ++#define CFG_IBAT6U (0) ++#define CFG_DBAT5L CFG_IBAT5L ++#define CFG_DBAT5U CFG_IBAT5U ++#define CFG_DBAT6L CFG_IBAT6L ++#define CFG_DBAT6U CFG_IBAT6U ++#endif ++ ++/* Nothing in BAT7 */ ++#define CFG_IBAT7L (0) ++#define CFG_IBAT7U (0) ++#define CFG_DBAT7L CFG_IBAT7L ++#define CFG_DBAT7U CFG_IBAT7U ++ ++/* ++ * Internal Definitions ++ * ++ * Boot Flags ++ */ ++#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ ++#define BOOTFLAG_WARM 0x02 /* Software reboot */ ++ ++#if (CONFIG_COMMANDS & CFG_CMD_KGDB) ++#define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */ ++#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ ++#endif ++ ++/* ++ * Environment Configuration ++ */ ++ ++#define CONFIG_ENV_OVERWRITE ++ ++#if defined(CONFIG_UEC_ETH) ++#define CONFIG_ETHADDR 00:04:9f:ef:03:01 ++#define CONFIG_HAS_ETH1 ++#define CONFIG_ETH1ADDR 00:04:9f:ef:03:02 ++#endif ++ ++#define CONFIG_BAUDRATE 115200 ++ ++#define CONFIG_LOADADDR 200000 /* default location for tftp and bootm */ ++ ++#define CONFIG_BOOTDELAY 6 /* -1 disables auto-boot */ ++#undef CONFIG_BOOTARGS /* the boot command will set bootargs */ ++ ++#define CONFIG_EXTRA_ENV_SETTINGS \ ++ "netdev=eth0\0" \ ++ "consoledev=ttyS0\0" \ ++ "bootfile=uImage\0" \ ++ "ramdiskaddr=1000000\0" \ ++ "ramdiskfile=rootfs.ext2.gz.uboot\0" \ ++ "fdtaddr=400000\0" \ ++ "fdtfile=mpc832x_rdb.dtb\0" \ ++ "" ++ ++#define CONFIG_NFSBOOTCOMMAND \ ++ "setenv bootargs root=/dev/nfs rw " \ ++ "nfsroot=$serverip:$rootpath " \ ++ "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ ++ "console=$consoledev,$baudrate $othbootargs;" \ ++ "tftp $loadaddr $bootfile;" \ ++ "tftp $fdtaddr $fdtfile;" \ ++ "bootm $loadaddr - $fdtaddr" ++ ++#define CONFIG_RAMBOOTCOMMAND \ ++ "setenv bootargs root=/dev/ram rw " \ ++ "console=$consoledev,$baudrate $othbootargs;" \ ++ "tftp $ramdiskaddr $ramdiskfile;" \ ++ "tftp $loadaddr $bootfile;" \ ++ "tftp $fdtaddr $fdtfile;" \ ++ "bootm $loadaddr $ramdiskaddr $fdtaddr" ++ ++ ++#define CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND ++ ++#endif /* __CONFIG_H */ diff --git a/packages/uboot/u-boot-1.1.6/u-boot-1.1.6-fsl-1-Fix-the-UEC-driver-bug-of-QE.patch b/packages/uboot/u-boot-1.1.6/u-boot-1.1.6-fsl-1-Fix-the-UEC-driver-bug-of-QE.patch new file mode 100644 index 0000000000..ad2ff243e8 --- /dev/null +++ b/packages/uboot/u-boot-1.1.6/u-boot-1.1.6-fsl-1-Fix-the-UEC-driver-bug-of-QE.patch @@ -0,0 +1,62 @@ +21fb83dfa2dcba7982eeb54f4ca7bc1056582c1e +diff --git a/drivers/qe/uec.c b/drivers/qe/uec.c +index f640c81..c44a5be 100644 +--- a/drivers/qe/uec.c ++++ b/drivers/qe/uec.c +@@ -1122,7 +1122,7 @@ static int uec_send(struct eth_device* dev, volatile void *buf, int len) + uec_private_t *uec; + ucc_fast_private_t *uccf; + volatile qe_bd_t *bd; +- volatile u16 status; ++ u16 status; + int i; + int result = 0; + +@@ -1131,7 +1131,7 @@ static int uec_send(struct eth_device* dev, volatile void *buf, int len) + bd = uec->txBd; + + /* Find an empty TxBD */ +- for (i = 0; BD_STATUS(bd) & TxBD_READY; i++) { ++ for (i = 0; bd->status & TxBD_READY; i++) { + if (i > 0x100000) { + printf("%s: tx buffer not ready\n", dev->name); + return result; +@@ -1150,13 +1150,11 @@ static int uec_send(struct eth_device* dev, volatile void *buf, int len) + ucc_fast_transmit_on_demand(uccf); + + /* Wait for buffer to be transmitted */ +- status = BD_STATUS(bd); +- for (i = 0; status & TxBD_READY; i++) { ++ for (i = 0; bd->status & TxBD_READY; i++) { + if (i > 0x100000) { + printf("%s: tx error\n", dev->name); + return result; + } +- status = BD_STATUS(bd); + } + + /* Ok, the buffer be transimitted */ +@@ -1171,12 +1169,12 @@ static int uec_recv(struct eth_device* dev) + { + uec_private_t *uec = dev->priv; + volatile qe_bd_t *bd; +- volatile u16 status; ++ u16 status; + u16 len; + u8 *data; + + bd = uec->rxBd; +- status = BD_STATUS(bd); ++ status = bd->status; + + while (!(status & RxBD_EMPTY)) { + if (!(status & RxBD_ERROR)) { +@@ -1190,7 +1188,7 @@ static int uec_recv(struct eth_device* dev) + BD_LENGTH_SET(bd, 0); + BD_STATUS_SET(bd, status | RxBD_EMPTY); + BD_ADVANCE(bd, status, uec->p_rx_bd_ring); +- status = BD_STATUS(bd); ++ status = bd->status; + } + uec->rxBd = bd; + diff --git a/packages/uboot/u-boot-1.1.6/u-boot-1.1.6-fsl-1-UEC-remove-udelay.patch b/packages/uboot/u-boot-1.1.6/u-boot-1.1.6-fsl-1-UEC-remove-udelay.patch new file mode 100644 index 0000000000..9e2829bd3e --- /dev/null +++ b/packages/uboot/u-boot-1.1.6/u-boot-1.1.6-fsl-1-UEC-remove-udelay.patch @@ -0,0 +1,15 @@ +123b7d94ab4fa50a62aa9c0c0202d4e2c99a14c8 +diff --git a/drivers/qe/uec.c b/drivers/qe/uec.c +index aea455b..a327a34 100644 +--- a/drivers/qe/uec.c ++++ b/drivers/qe/uec.c +@@ -567,9 +567,6 @@ static void phy_change(struct eth_device *dev) + + uec_regs = uec->uec_regs; + +- /* Delay 5s to give the PHY a chance to change the register state */ +- udelay(5000000); +- + /* Update the link, speed, duplex */ + result = uec->mii_info->phyinfo->read_status(uec->mii_info); + diff --git a/packages/uboot/u-boot-1.1.6/u-boot-1.1.6-fsl-1-mpc83xx-20061206.patch b/packages/uboot/u-boot-1.1.6/u-boot-1.1.6-fsl-1-mpc83xx-20061206.patch new file mode 100644 index 0000000000..5f3e1f7aaa --- /dev/null +++ b/packages/uboot/u-boot-1.1.6/u-boot-1.1.6-fsl-1-mpc83xx-20061206.patch @@ -0,0 +1,32020 @@ +This patch, when applied against the external pristine +tarball u-boot-1.1.6.tar.bz2, makes the u-boot code match the git tree +with sha1 dd520bf314c7add4183c5191692180f576f96b60, +in the repository http://opensource.freescale.com/pub/scm/u-boot-83xx.git. +This git tag is identified for this code baseline: u-boot-1.1.6-fsl-1 + +The patch includes support changes for mpc8349itx, mpc8349emds, and mpc8360emds +as well as many other changes as of November 30, 2006. + +diff -Naupr u-boot-1.1.6/board/amcc/yellowstone/yellowstone.c u-boot-1.1.6-fsl-1/board/amcc/yellowstone/yellowstone.c +--- u-boot-1.1.6/board/amcc/yellowstone/yellowstone.c 2006-11-02 08:15:01.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/board/amcc/yellowstone/yellowstone.c 2006-11-30 12:34:13.000000000 -0600 +@@ -552,3 +552,9 @@ void hw_watchdog_reset(void) + + } + #endif ++ ++void board_reset(void) ++{ ++ /* give reset to BCSR */ ++ *(unsigned char *)(CFG_BCSR_BASE | 0x06) = 0x09; ++} +diff -Naupr u-boot-1.1.6/board/amcc/yosemite/yosemite.c u-boot-1.1.6-fsl-1/board/amcc/yosemite/yosemite.c +--- u-boot-1.1.6/board/amcc/yosemite/yosemite.c 2006-11-02 08:15:01.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/board/amcc/yosemite/yosemite.c 2006-11-30 12:34:13.000000000 -0600 +@@ -548,3 +548,9 @@ void hw_watchdog_reset(void) + + } + #endif ++ ++void board_reset(void) ++{ ++ /* give reset to BCSR */ ++ *(unsigned char *)(CFG_BCSR_BASE | 0x06) = 0x09; ++} +diff -Naupr u-boot-1.1.6/board/bc3450/bc3450.c u-boot-1.1.6-fsl-1/board/bc3450/bc3450.c +--- u-boot-1.1.6/board/bc3450/bc3450.c 2006-11-02 08:15:01.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/board/bc3450/bc3450.c 2006-11-10 11:24:28.000000000 -0600 +@@ -295,7 +295,6 @@ void pci_init_board(void) + #endif + + #if defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET) +-#define GPIO_PSC1_4 0x01000000UL + + void init_ide_reset (void) + { +@@ -311,9 +310,9 @@ void ide_set_reset (int idereset) + debug ("ide_reset(%d)\n", idereset); + + if (idereset) { +- *(vu_long *) MPC5XXX_WU_GPIO_DATA &= ~GPIO_PSC1_4; ++ *(vu_long *) MPC5XXX_WU_GPIO_DATA_O &= ~GPIO_PSC1_4; + } else { +- *(vu_long *) MPC5XXX_WU_GPIO_DATA |= GPIO_PSC1_4; ++ *(vu_long *) MPC5XXX_WU_GPIO_DATA_O |= GPIO_PSC1_4; + } + } + #endif /* defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET) */ +diff -Naupr u-boot-1.1.6/board/BuS/EB+MCF-EV123/cfm_flash.c u-boot-1.1.6-fsl-1/board/BuS/EB+MCF-EV123/cfm_flash.c +--- u-boot-1.1.6/board/BuS/EB+MCF-EV123/cfm_flash.c 2006-11-02 08:15:01.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/board/BuS/EB+MCF-EV123/cfm_flash.c 2006-12-06 10:33:49.000000000 -0600 +@@ -60,7 +60,7 @@ void cfm_flash_init (flash_info_t * info + MCFCFM_MCR = 0; + MCFCFM_CLKD = CFM_CLK; + debug ("CFM Clock divider: %ld (%d Hz @ %ld Hz)\n",CFM_CLK,\ +- CFG_CLK / (2* ((CFM_CLK & 0x3F)+1) * (1+((CFM_CLK & 0x40)>>6)*7)),\ ++ CFG_CLK / (2* ((CFM_CLK & 0x3F)+1) * (1+((CFM_CLK & 0x40)>>6)*7)),\ + CFG_CLK); + MCFCFM_SACC = 0; + MCFCFM_DACC = 0; +diff -Naupr u-boot-1.1.6/board/BuS/EB+MCF-EV123/EB+MCF-EV123.c u-boot-1.1.6-fsl-1/board/BuS/EB+MCF-EV123/EB+MCF-EV123.c +--- u-boot-1.1.6/board/BuS/EB+MCF-EV123/EB+MCF-EV123.c 2006-11-02 08:15:01.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/board/BuS/EB+MCF-EV123/EB+MCF-EV123.c 2006-12-06 10:33:49.000000000 -0600 +@@ -50,13 +50,13 @@ long int initdram (int board_type) + + MCFSDRAMC_DACR0 = MCFSDRAMC_DACR_BASE(CFG_SDRAM_BASE0) + | MCFSDRAMC_DACR_CASL(1) +- | MCFSDRAMC_DACR_CBM(3) ++ | MCFSDRAMC_DACR_CBM(3) + | MCFSDRAMC_DACR_PS_16); + + MCFSDRAMC_DMR0 = MCFSDRAMC_DMR_BAM_16M + | MCFSDRAMC_DMR_V; + +- MCFSDRAMC_DACR0 |= MCFSDRAMC_DACR_IP; ++ MCFSDRAMC_DACR0 |= MCFSDRAMC_DACR_IP; + + *(unsigned short *)(CFG_SDRAM_BASE0) = 0xA5A5; + MCFSDRAMC_DACR0 |= MCFSDRAMC_DACR_RE; +@@ -70,10 +70,10 @@ long int initdram (int board_type) + #ifdef CFG_SDRAM_BASE1 + MCFSDRAMC_DACR1 = MCFSDRAMC_DACR_BASE(CFG_SDRAM_BASE1) + | MCFSDRAMC_DACR_CASL(1) +- | MCFSDRAMC_DACR_CBM(3) ++ | MCFSDRAMC_DACR_CBM(3) + | MCFSDRAMC_DACR_PS_16; + +- MCFSDRAMC_DMR1 = MCFSDRAMC_DMR_BAM_16M ++ MCFSDRAMC_DMR1 = MCFSDRAMC_DMR_BAM_16M + | MCFSDRAMC_DMR_V; + + MCFSDRAMC_DACR1 |= MCFSDRAMC_DACR_IP; +@@ -82,7 +82,7 @@ long int initdram (int board_type) + MCFSDRAMC_DACR1 |= MCFSDRAMC_DACR_RE; + for (i=0; i < 2000; i++) + asm(" nop"); +- MCFSDRAMC_DACR1 |= MCFSDRAMC_DACR_IMRS; ++ MCFSDRAMC_DACR1 |= MCFSDRAMC_DACR_IMRS; + *(unsigned int *)(CFG_SDRAM_BASE1 + 0x220) = 0xA5A5; + size += CFG_SDRAM_SIZE1 * 1024 * 1024; + #endif +diff -Naupr u-boot-1.1.6/board/BuS/EB+MCF-EV123/flash.c u-boot-1.1.6-fsl-1/board/BuS/EB+MCF-EV123/flash.c +--- u-boot-1.1.6/board/BuS/EB+MCF-EV123/flash.c 2006-11-02 08:15:01.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/board/BuS/EB+MCF-EV123/flash.c 2006-12-06 10:33:49.000000000 -0600 +@@ -256,7 +256,7 @@ int flash_erase (flash_info_t * info, in + enable_interrupts (); + + if (cflag) +- icache_enable (); ++ icache_enable (); + + return rc; + } +diff -Naupr u-boot-1.1.6/board/BuS/EB+MCF-EV123/u-boot.lds u-boot-1.1.6-fsl-1/board/BuS/EB+MCF-EV123/u-boot.lds +--- u-boot-1.1.6/board/BuS/EB+MCF-EV123/u-boot.lds 2006-11-02 08:15:01.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/board/BuS/EB+MCF-EV123/u-boot.lds 2006-12-06 10:33:49.000000000 -0600 +@@ -34,11 +34,11 @@ SECTIONS + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } +- .rela.text : { *(.rela.text) } ++ .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } +- .rela.data : { *(.rela.data) } +- .rel.rodata : { *(.rel.rodata) } +- .rela.rodata : { *(.rela.rodata) } ++ .rela.data : { *(.rela.data) } ++ .rel.rodata : { *(.rel.rodata) } ++ .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } +diff -Naupr u-boot-1.1.6/board/BuS/EB+MCF-EV123/VCxK.c u-boot-1.1.6-fsl-1/board/BuS/EB+MCF-EV123/VCxK.c +--- u-boot-1.1.6/board/BuS/EB+MCF-EV123/VCxK.c 2006-11-02 08:15:01.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/board/BuS/EB+MCF-EV123/VCxK.c 2006-12-06 10:33:49.000000000 -0600 +@@ -66,7 +66,7 @@ int init_vcxk(void) + return 1; + } + +-void vcxk_loadimage(ulong source) ++void vcxk_loadimage(ulong source) + { + int cnt; + vcxk_acknowledge_wait(); +diff -Naupr u-boot-1.1.6/board/BuS/EB+MCF-EV123/VCxK.h u-boot-1.1.6-fsl-1/board/BuS/EB+MCF-EV123/VCxK.h +--- u-boot-1.1.6/board/BuS/EB+MCF-EV123/VCxK.h 2006-11-02 08:15:01.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/board/BuS/EB+MCF-EV123/VCxK.h 2006-12-06 10:33:49.000000000 -0600 +@@ -25,24 +25,24 @@ + #define __VCXK_H_ + + extern int init_vcxk(void); +-void vcxk_loadimage(ulong source); ++void vcxk_loadimage(ulong source); + + #define VIDEO_ACKNOWLEDGE_PORT MCFGPTB_GPTPORT +-#define VIDEO_ACKNOWLEDGE_DDR MCFGPTB_GPTDDR ++#define VIDEO_ACKNOWLEDGE_DDR MCFGPTB_GPTDDR + #define VIDEO_ACKNOWLEDGE_PIN 0x0001 + +-#define VIDEO_ENABLE_PORT MCFGPTB_GPTPORT +-#define VIDEO_ENABLE_DDR MCFGPTB_GPTDDR ++#define VIDEO_ENABLE_PORT MCFGPTB_GPTPORT ++#define VIDEO_ENABLE_DDR MCFGPTB_GPTDDR + #define VIDEO_ENABLE_PIN 0x0002 + +-#define VIDEO_REQUEST_PORT MCFGPTB_GPTPORT +-#define VIDEO_REQUEST_DDR MCFGPTB_GPTDDR ++#define VIDEO_REQUEST_PORT MCFGPTB_GPTPORT ++#define VIDEO_REQUEST_DDR MCFGPTB_GPTDDR + #define VIDEO_REQUEST_PIN 0x0004 + + #define VIDEO_Invert_CFG MCFGPIO_PEPAR + #define VIDEO_Invert_IO MCFGPIO_PEPAR_PEPA2 +-#define VIDEO_INVERT_PORT MCFGPIO_PORTE +-#define VIDEO_INVERT_DDR MCFGPIO_DDRE ++#define VIDEO_INVERT_PORT MCFGPIO_PORTE ++#define VIDEO_INVERT_DDR MCFGPIO_DDRE + #define VIDEO_INVERT_PIN MCFGPIO_PORT2 + + #endif +diff -Naupr u-boot-1.1.6/board/emk/top5200/top5200.c u-boot-1.1.6-fsl-1/board/emk/top5200/top5200.c +--- u-boot-1.1.6/board/emk/top5200/top5200.c 2006-11-02 08:15:01.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/board/emk/top5200/top5200.c 2006-12-06 10:33:49.000000000 -0600 +@@ -186,13 +186,11 @@ void pci_init_board(void) + *****************************************************************************/ + #if defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET) + +-#define GPIO_PSC1_4 0x01000000UL +- + void init_ide_reset (void) + { + debug ("init_ide_reset\n"); + +- /* Configure PSC1_4 as GPIO output for ATA reset */ ++ /* Configure PSC1_4 as GPIO output for ATA reset */ + *(vu_long *) MPC5XXX_WU_GPIO_ENABLE |= GPIO_PSC1_4; + *(vu_long *) MPC5XXX_WU_GPIO_DIR |= GPIO_PSC1_4; + } +@@ -202,9 +200,9 @@ void ide_set_reset (int idereset) + debug ("ide_reset(%d)\n", idereset); + + if (idereset) { +- *(vu_long *) MPC5XXX_WU_GPIO_DATA &= ~GPIO_PSC1_4; ++ *(vu_long *) MPC5XXX_WU_GPIO_DATA_O &= ~GPIO_PSC1_4; + } else { +- *(vu_long *) MPC5XXX_WU_GPIO_DATA |= GPIO_PSC1_4; ++ *(vu_long *) MPC5XXX_WU_GPIO_DATA_O |= GPIO_PSC1_4; + } + } + #endif /* defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET) */ +diff -Naupr u-boot-1.1.6/board/esd/cpci5200/cpci5200.c u-boot-1.1.6-fsl-1/board/esd/cpci5200/cpci5200.c +--- u-boot-1.1.6/board/esd/cpci5200/cpci5200.c 2006-11-02 08:15:01.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/board/esd/cpci5200/cpci5200.c 2006-12-06 10:33:49.000000000 -0600 +@@ -191,16 +191,13 @@ static struct pci_controller hose; + + extern void pci_mpc5xxx_init(struct pci_controller *); + +-void pci_init_board(void +- ) { ++void pci_init_board(void) { + pci_mpc5xxx_init(&hose); + } + #endif + + #if defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET) + +-#define GPIO_PSC1_4 0x01000000UL +- + void init_ide_reset(void) + { + debug("init_ide_reset\n"); +@@ -215,9 +212,9 @@ void ide_set_reset(int idereset) + debug("ide_reset(%d)\n", idereset); + + if (idereset) { +- *(vu_long *) MPC5XXX_WU_GPIO_DATA &= ~GPIO_PSC1_4; ++ *(vu_long *) MPC5XXX_WU_GPIO_DATA_O &= ~GPIO_PSC1_4; + } else { +- *(vu_long *) MPC5XXX_WU_GPIO_DATA |= GPIO_PSC1_4; ++ *(vu_long *) MPC5XXX_WU_GPIO_DATA_O |= GPIO_PSC1_4; + } + } + #endif /* defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET) */ +@@ -242,7 +239,7 @@ void init_ata_reset(void) + debug("init_ata_reset\n"); + + /* Configure GPIO_WU6 as GPIO output for ATA reset */ +- *(vu_long *) MPC5XXX_WU_GPIO_DATA |= GPIO_WU6; ++ *(vu_long *) MPC5XXX_WU_GPIO_DATA_O |= GPIO_WU6; + *(vu_long *) MPC5XXX_WU_GPIO_ENABLE |= GPIO_WU6; + *(vu_long *) MPC5XXX_WU_GPIO_DIR |= GPIO_WU6; + __asm__ volatile ("sync"); +diff -Naupr u-boot-1.1.6/board/esd/pf5200/pf5200.c u-boot-1.1.6-fsl-1/board/esd/pf5200/pf5200.c +--- u-boot-1.1.6/board/esd/pf5200/pf5200.c 2006-11-02 08:15:01.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/board/esd/pf5200/pf5200.c 2006-12-06 10:33:49.000000000 -0600 +@@ -191,16 +191,13 @@ static struct pci_controller hose; + + extern void pci_mpc5xxx_init(struct pci_controller *); + +-void pci_init_board(void +- ) { ++void pci_init_board(void) { + pci_mpc5xxx_init(&hose); + } + #endif + + #if defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET) + +-#define GPIO_PSC1_4 0x01000000UL +- + void init_ide_reset(void) + { + debug("init_ide_reset\n"); +@@ -215,9 +212,9 @@ void ide_set_reset(int idereset) + debug("ide_reset(%d)\n", idereset); + + if (idereset) { +- *(vu_long *) MPC5XXX_WU_GPIO_DATA &= ~GPIO_PSC1_4; ++ *(vu_long *) MPC5XXX_WU_GPIO_DATA_O &= ~GPIO_PSC1_4; + } else { +- *(vu_long *) MPC5XXX_WU_GPIO_DATA |= GPIO_PSC1_4; ++ *(vu_long *) MPC5XXX_WU_GPIO_DATA_O |= GPIO_PSC1_4; + } + } + #endif /* defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET) */ +@@ -242,7 +239,7 @@ void init_power_switch(void) + debug("init_power_switch\n"); + + /* Configure GPIO_WU6 as GPIO output for ATA reset */ +- *(vu_long *) MPC5XXX_WU_GPIO_DATA |= GPIO_WU6; ++ *(vu_long *) MPC5XXX_WU_GPIO_DATA_O |= GPIO_WU6; + *(vu_long *) MPC5XXX_WU_GPIO_ENABLE |= GPIO_WU6; + *(vu_long *) MPC5XXX_WU_GPIO_DIR |= GPIO_WU6; + __asm__ volatile ("sync"); +@@ -272,10 +269,10 @@ void power_set_reset(int power) + debug("ide_set_reset(%d)\n", power); + + if (power) { +- *(vu_long *) MPC5XXX_WU_GPIO_DATA &= ~GPIO_WU6; ++ *(vu_long *) MPC5XXX_WU_GPIO_DATA_O &= ~GPIO_WU6; + *(vu_long *) MPC5XXX_INTERRUPT_GPIO_DATA_OUTPUT &= ~GPIO_USB9; + } else { +- *(vu_long *) MPC5XXX_WU_GPIO_DATA |= GPIO_WU6; ++ *(vu_long *) MPC5XXX_WU_GPIO_DATA_O |= GPIO_WU6; + if ((*(vu_long *) MPC5XXX_INTERRUPT_GPIO_STATUS & GPIO_USB9S) == + 0) { + *(vu_long *) MPC5XXX_SIMPLEIO_GPIO_DATA_OUTPUT |= +diff -Naupr u-boot-1.1.6/board/icecube/icecube.c u-boot-1.1.6-fsl-1/board/icecube/icecube.c +--- u-boot-1.1.6/board/icecube/icecube.c 2006-11-02 08:15:01.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/board/icecube/icecube.c 2006-12-06 10:33:49.000000000 -0600 +@@ -29,6 +29,10 @@ + #include <pci.h> + #include <asm/processor.h> + ++#if defined(CONFIG_OF_FLAT_TREE) ++#include <ft_build.h> ++#endif ++ + #if defined(CONFIG_LITE5200B) + #include "mt46v32m16.h" + #else +@@ -308,17 +312,15 @@ void pci_init_board(void) + + #if defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET) + +-#define GPIO_PSC1_4 0x01000000UL +- + void init_ide_reset (void) + { + debug ("init_ide_reset\n"); + +- /* Configure PSC1_4 as GPIO output for ATA reset */ ++ /* Configure PSC1_4 as GPIO output for ATA reset */ + *(vu_long *) MPC5XXX_WU_GPIO_ENABLE |= GPIO_PSC1_4; + *(vu_long *) MPC5XXX_WU_GPIO_DIR |= GPIO_PSC1_4; + /* Deassert reset */ +- *(vu_long *) MPC5XXX_WU_GPIO_DATA |= GPIO_PSC1_4; ++ *(vu_long *) MPC5XXX_WU_GPIO_DATA_O |= GPIO_PSC1_4; + } + + void ide_set_reset (int idereset) +@@ -326,11 +328,19 @@ void ide_set_reset (int idereset) + debug ("ide_reset(%d)\n", idereset); + + if (idereset) { +- *(vu_long *) MPC5XXX_WU_GPIO_DATA &= ~GPIO_PSC1_4; ++ *(vu_long *) MPC5XXX_WU_GPIO_DATA_O &= ~GPIO_PSC1_4; + /* Make a delay. MPC5200 spec says 25 usec min */ + udelay(500000); + } else { +- *(vu_long *) MPC5XXX_WU_GPIO_DATA |= GPIO_PSC1_4; ++ *(vu_long *) MPC5XXX_WU_GPIO_DATA_O |= GPIO_PSC1_4; + } + } + #endif /* defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET) */ ++ ++#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP) ++void ++ft_board_setup(void *blob, bd_t *bd) ++{ ++ ft_cpu_setup(blob, bd); ++} ++#endif +diff -Naupr u-boot-1.1.6/board/inka4x0/inka4x0.c u-boot-1.1.6-fsl-1/board/inka4x0/inka4x0.c +--- u-boot-1.1.6/board/inka4x0/inka4x0.c 2006-11-02 08:15:01.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/board/inka4x0/inka4x0.c 2006-11-10 11:24:28.000000000 -0600 +@@ -173,9 +173,6 @@ void flash_preinit(void) + *(vu_long *)MPC5XXX_BOOTCS_CFG &= ~0x1; /* clear RO */ + } + +-#define GPIO_WKUP_7 0x80000000UL +-#define GPIO_PSC3_9 0x04000000UL +- + int misc_init_f (void) + { + uchar tmp[10]; +@@ -218,13 +215,13 @@ int misc_init_f (void) + *(vu_long *)MPC5XXX_WU_GPIO_DIR |= 0xc4000000; + + /* Set LR mirror bit because it is low-active */ +- *(vu_long *)MPC5XXX_WU_GPIO_DATA |= GPIO_WKUP_7; ++ *(vu_long *) MPC5XXX_WU_GPIO_DATA_O |= GPIO_WKUP_7; + /* + * Reset Coral-P graphics controller + */ + *(vu_long *) MPC5XXX_WU_GPIO_ENABLE |= GPIO_PSC3_9; + *(vu_long *) MPC5XXX_WU_GPIO_DIR |= GPIO_PSC3_9; +- *(vu_long *) MPC5XXX_WU_GPIO_DATA |= GPIO_PSC3_9; ++ *(vu_long *) MPC5XXX_WU_GPIO_DATA_O |= GPIO_PSC3_9; + return 0; + } + +@@ -241,8 +238,6 @@ void pci_init_board(void) + + #if defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET) + +-#define GPIO_PSC1_4 0x01000000UL +- + void init_ide_reset (void) + { + debug ("init_ide_reset\n"); +@@ -251,7 +246,7 @@ void init_ide_reset (void) + *(vu_long *) MPC5XXX_WU_GPIO_ENABLE |= GPIO_PSC1_4; + *(vu_long *) MPC5XXX_WU_GPIO_DIR |= GPIO_PSC1_4; + /* Deassert reset */ +- *(vu_long *) MPC5XXX_WU_GPIO_DATA |= GPIO_PSC1_4; ++ *(vu_long *) MPC5XXX_WU_GPIO_DATA_O |= GPIO_PSC1_4; + } + + void ide_set_reset (int idereset) +@@ -259,11 +254,11 @@ void ide_set_reset (int idereset) + debug ("ide_reset(%d)\n", idereset); + + if (idereset) { +- *(vu_long *) MPC5XXX_WU_GPIO_DATA &= ~GPIO_PSC1_4; ++ *(vu_long *) MPC5XXX_WU_GPIO_DATA_O &= ~GPIO_PSC1_4; + /* Make a delay. MPC5200 spec says 25 usec min */ + udelay(500000); + } else { +- *(vu_long *) MPC5XXX_WU_GPIO_DATA |= GPIO_PSC1_4; ++ *(vu_long *) MPC5XXX_WU_GPIO_DATA_O |= GPIO_PSC1_4; + } + } + #endif /* defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET) */ +diff -Naupr u-boot-1.1.6/board/LEOX/elpt860/u-boot.lds u-boot-1.1.6-fsl-1/board/LEOX/elpt860/u-boot.lds +--- u-boot-1.1.6/board/LEOX/elpt860/u-boot.lds 2006-11-02 08:15:01.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/board/LEOX/elpt860/u-boot.lds 2006-12-06 10:33:49.000000000 -0600 +@@ -43,11 +43,11 @@ SECTIONS + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } +- .rela.text : { *(.rela.text) } ++ .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } +- .rela.data : { *(.rela.data) } +- .rel.rodata : { *(.rel.rodata) } +- .rela.rodata : { *(.rela.rodata) } ++ .rela.data : { *(.rela.data) } ++ .rel.rodata : { *(.rel.rodata) } ++ .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } +diff -Naupr u-boot-1.1.6/board/LEOX/elpt860/u-boot.lds.debug u-boot-1.1.6-fsl-1/board/LEOX/elpt860/u-boot.lds.debug +--- u-boot-1.1.6/board/LEOX/elpt860/u-boot.lds.debug 2006-11-02 08:15:01.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/board/LEOX/elpt860/u-boot.lds.debug 2006-12-06 10:33:49.000000000 -0600 +@@ -43,11 +43,11 @@ SECTIONS + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } +- .rela.text : { *(.rela.text) } ++ .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } +- .rela.data : { *(.rela.data) } +- .rel.rodata : { *(.rel.rodata) } +- .rela.rodata : { *(.rela.rodata) } ++ .rela.data : { *(.rela.data) } ++ .rel.rodata : { *(.rel.rodata) } ++ .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } +diff -Naupr u-boot-1.1.6/board/MAI/AmigaOneG3SE/articiaS_pci.c u-boot-1.1.6-fsl-1/board/MAI/AmigaOneG3SE/articiaS_pci.c +--- u-boot-1.1.6/board/MAI/AmigaOneG3SE/articiaS_pci.c 2006-11-02 08:15:01.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/board/MAI/AmigaOneG3SE/articiaS_pci.c 2006-12-06 10:33:49.000000000 -0600 +@@ -368,11 +368,11 @@ void articiaS_pci_init (void) + if (articiaS_init_vga() == -1) + { + /* If the VGA didn't init and we have stdout set to VGA, reset to serial */ +-/* s = getenv("stdout"); */ +-/* if (s && strcmp(s, "vga") == 0) */ +-/* { */ +-/* setenv("stdout", "serial"); */ +-/* } */ ++/* s = getenv("stdout"); */ ++/* if (s && strcmp(s, "vga") == 0) */ ++/* { */ ++/* setenv("stdout", "serial"); */ ++/* } */ + } + } + pci_write_config_byte(PCI_BDF(0,1,0), PCI_INTERRUPT_LINE, 0xFF); +diff -Naupr u-boot-1.1.6/board/MAI/AmigaOneG3SE/enet.c u-boot-1.1.6-fsl-1/board/MAI/AmigaOneG3SE/enet.c +--- u-boot-1.1.6/board/MAI/AmigaOneG3SE/enet.c 2006-11-02 08:15:01.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/board/MAI/AmigaOneG3SE/enet.c 2006-12-06 10:33:49.000000000 -0600 +@@ -41,57 +41,57 @@ + + /* 3Com Commands, top 5 bits are command and bottom 11 bits are parameters */ + +-#define TotalReset (0<<11) +-#define SelectWindow (1<<11) +-#define StartCoax (2<<11) +-#define RxDisable (3<<11) +-#define RxEnable (4<<11) +-#define RxReset (5<<11) +-#define UpStall (6<<11) +-#define UpUnstall (6<<11)+1 +-#define DownStall (6<<11)+2 +-#define DownUnstall (6<<11)+3 +-#define RxDiscard (8<<11) +-#define TxEnable (9<<11) +-#define TxDisable (10<<11) +-#define TxReset (11<<11) +-#define FakeIntr (12<<11) +-#define AckIntr (13<<11) +-#define SetIntrEnb (14<<11) +-#define SetStatusEnb (15<<11) +-#define SetRxFilter (16<<11) +-#define SetRxThreshold (17<<11) +-#define SetTxThreshold (18<<11) +-#define SetTxStart (19<<11) +-#define StartDMAUp (20<<11) +-#define StartDMADown (20<<11)+1 ++#define TotalReset (0<<11) ++#define SelectWindow (1<<11) ++#define StartCoax (2<<11) ++#define RxDisable (3<<11) ++#define RxEnable (4<<11) ++#define RxReset (5<<11) ++#define UpStall (6<<11) ++#define UpUnstall (6<<11)+1 ++#define DownStall (6<<11)+2 ++#define DownUnstall (6<<11)+3 ++#define RxDiscard (8<<11) ++#define TxEnable (9<<11) ++#define TxDisable (10<<11) ++#define TxReset (11<<11) ++#define FakeIntr (12<<11) ++#define AckIntr (13<<11) ++#define SetIntrEnb (14<<11) ++#define SetStatusEnb (15<<11) ++#define SetRxFilter (16<<11) ++#define SetRxThreshold (17<<11) ++#define SetTxThreshold (18<<11) ++#define SetTxStart (19<<11) ++#define StartDMAUp (20<<11) ++#define StartDMADown (20<<11)+1 + #define StatsEnable (21<<11) + #define StatsDisable (22<<11) +-#define StopCoax (23<<11) +-#define SetFilterBit (25<<11) ++#define StopCoax (23<<11) ++#define SetFilterBit (25<<11) + + /* The SetRxFilter command accepts the following classes */ + +-#define RxStation 1 ++#define RxStation 1 + #define RxMulticast 2 + #define RxBroadcast 4 +-#define RxProm 8 ++#define RxProm 8 + + /* 3Com status word defnitions */ + +-#define IntLatch 0x0001 +-#define HostError 0x0002 +-#define TxComplete 0x0004 +-#define TxAvailable 0x0008 +-#define RxComplete 0x0010 +-#define RxEarly 0x0020 +-#define IntReq 0x0040 +-#define StatsFull 0x0080 +-#define DMADone (1<<8) +-#define DownComplete (1<<9) +-#define UpComplete (1<<10) +-#define DMAInProgress (1<<11) /* DMA controller is still busy.*/ +-#define CmdInProgress (1<<12) /* EL3_CMD is still busy.*/ ++#define IntLatch 0x0001 ++#define HostError 0x0002 ++#define TxComplete 0x0004 ++#define TxAvailable 0x0008 ++#define RxComplete 0x0010 ++#define RxEarly 0x0020 ++#define IntReq 0x0040 ++#define StatsFull 0x0080 ++#define DMADone (1<<8) ++#define DownComplete (1<<9) ++#define UpComplete (1<<10) ++#define DMAInProgress (1<<11) /* DMA controller is still busy.*/ ++#define CmdInProgress (1<<12) /* EL3_CMD is still busy.*/ + + /* Polling Registers */ + +@@ -100,17 +100,17 @@ + + /* Register window 0 offets */ + +-#define Wn0EepromCmd 10 /* Window 0: EEPROM command register. */ +-#define Wn0EepromData 12 /* Window 0: EEPROM results register. */ ++#define Wn0EepromCmd 10 /* Window 0: EEPROM command register. */ ++#define Wn0EepromData 12 /* Window 0: EEPROM results register. */ + #define IntrStatus 0x0E /* Valid in all windows. */ + + /* Register window 0 EEPROM bits */ + +-#define EEPROM_Read 0x80 +-#define EEPROM_WRITE 0x40 +-#define EEPROM_ERASE 0xC0 +-#define EEPROM_EWENB 0x30 /* Enable erasing/writing for 10 msec. */ +-#define EEPROM_EWDIS 0x00 /* Disable EWENB before 10 msec timeout. */ ++#define EEPROM_Read 0x80 ++#define EEPROM_WRITE 0x40 ++#define EEPROM_ERASE 0xC0 ++#define EEPROM_EWENB 0x30 /* Enable erasing/writing for 10 msec. */ ++#define EEPROM_EWDIS 0x00 /* Disable EWENB before 10 msec timeout. */ + + /* EEPROM locations. */ + +@@ -129,13 +129,13 @@ + + /* Register window 1 offsets, the window used in normal operation */ + +-#define TX_FIFO 0x10 +-#define RX_FIFO 0x10 +-#define RxErrors 0x14 +-#define RxStatus 0x18 ++#define TX_FIFO 0x10 ++#define RX_FIFOa 0x10 ++#define RxErrors 0x14 ++#define RxStatus 0x18 + #define Timer 0x1A +-#define TxStatus 0x1B +-#define TxFree 0x1C /* Remaining free bytes in Tx buffer. */ ++#define TxStatus 0x1B ++#define TxFree 0x1C /* Remaining free bytes in Tx buffer. */ + + /* Register Window 2 */ + +@@ -147,47 +147,47 @@ + #define Wn3_MAC_Ctrl 6 + #define Wn3_Options 8 + +-#define BFEXT(value, offset, bitcount) \ ++#define BFEXT(value, offset, bitcount) \ + ((((unsigned long)(value)) >> (offset)) & ((1 << (bitcount)) - 1)) + + #define BFINS(lhs, rhs, offset, bitcount) \ +- (((lhs) & ~((((1 << (bitcount)) - 1)) << (offset))) | \ ++ (((lhs) & ~((((1 << (bitcount)) - 1)) << (offset))) | \ + (((rhs) & ((1 << (bitcount)) - 1)) << (offset))) + + #define RAM_SIZE(v) BFEXT(v, 0, 3) +-#define RAM_WIDTH(v) BFEXT(v, 3, 1) +-#define RAM_SPEED(v) BFEXT(v, 4, 2) ++#define RAM_WIDTH(v) BFEXT(v, 3, 1) ++#define RAM_SPEED(v) BFEXT(v, 4, 2) + #define ROM_SIZE(v) BFEXT(v, 6, 2) +-#define RAM_SPLIT(v) BFEXT(v, 16, 2) ++#define RAM_SPLIT(v) BFEXT(v, 16, 2) + #define XCVR(v) BFEXT(v, 20, 4) +-#define AUTOSELECT(v) BFEXT(v, 24, 1) ++#define AUTOSELECT(v) BFEXT(v, 24, 1) + + /* Register Window 4: Xcvr/media bits */ + +-#define Wn4_FIFODiag 4 +-#define Wn4_NetDiag 6 ++#define Wn4_FIFODiag 4 ++#define Wn4_NetDiag 6 + #define Wn4_PhysicalMgmt 8 +-#define Wn4_Media 10 ++#define Wn4_Media 10 + +-#define Media_SQE 0x0008 /* Enable SQE error counting for AUI. */ +-#define Media_10TP 0x00C0 /* Enable link beat and jabber for 10baseT. */ +-#define Media_Lnk 0x0080 /* Enable just link beat for 100TX/100FX. */ +-#define Media_LnkBeat 0x0800 ++#define Media_SQE 0x0008 /* Enable SQE error counting for AUI. */ ++#define Media_10TP 0x00C0 /* Enable link beat and jabber for 10baseT. */ ++#define Media_Lnk 0x0080 /* Enable just link beat for 100TX/100FX. */ ++#define Media_LnkBeat 0x0800 + + /* Register Window 7: Bus Master control */ + +-#define Wn7_MasterAddr 0 +-#define Wn7_MasterLen 6 +-#define Wn7_MasterStatus 12 ++#define Wn7_MasterAddr 0 ++#define Wn7_MasterLen 6 ++#define Wn7_MasterStatus 12 + + /* Boomerang bus master control registers. */ + +-#define PktStatus 0x20 ++#define PktStatus 0x20 + #define DownListPtr 0x24 +-#define FragAddr 0x28 +-#define FragLen 0x2c ++#define FragAddr 0x28 ++#define FragLen 0x2c + #define TxFreeThreshold 0x2f +-#define UpPktStatus 0x30 ++#define UpPktStatus 0x30 + #define UpListPtr 0x38 + + /* The Rx and Tx descriptor lists. */ +diff -Naupr u-boot-1.1.6/board/MAI/AmigaOneG3SE/Makefile u-boot-1.1.6-fsl-1/board/MAI/AmigaOneG3SE/Makefile +--- u-boot-1.1.6/board/MAI/AmigaOneG3SE/Makefile 2006-11-02 08:15:01.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/board/MAI/AmigaOneG3SE/Makefile 2006-12-06 10:33:49.000000000 -0600 +@@ -30,7 +30,7 @@ endif + LIB = $(obj)lib$(BOARD).a + + COBJS = $(BOARD).o articiaS.o flash.o serial.o smbus.o articiaS_pci.o \ +- via686.o i8259.o ../bios_emulator/x86interface.o \ ++ via686.o i8259.o ../bios_emulator/x86interface.o \ + ../bios_emulator/bios.o ../bios_emulator/glue.o \ + interrupts.o ps2kbd.o video.o usb_uhci.o enet.o \ + ../menu/cmd_menu.o cmd_boota.o nvram.o +diff -Naupr u-boot-1.1.6/board/mcc200/mcc200.c u-boot-1.1.6-fsl-1/board/mcc200/mcc200.c +--- u-boot-1.1.6/board/mcc200/mcc200.c 2006-11-02 08:15:01.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/board/mcc200/mcc200.c 2006-11-30 12:34:13.000000000 -0600 +@@ -27,6 +27,7 @@ + #include <common.h> + #include <mpc5xxx.h> + #include <pci.h> ++#include <asm/processor.h> + + /* Two MT48LC8M32B2 for 32 MB */ + /* #include "mt48lc8m32b2-6-7.h" */ +@@ -98,6 +99,7 @@ long int initdram (int board_type) + { + ulong dramsize = 0; + ulong dramsize2 = 0; ++ uint svr, pvr; + #ifndef CFG_RAMBOOT + ulong test1, test2; + +@@ -192,6 +194,22 @@ long int initdram (int board_type) + + #endif /* CFG_RAMBOOT */ + ++ /* ++ * On MPC5200B we need to set the special configuration delay in the ++ * DDR controller. Please refer to Freescale's AN3221 "MPC5200B SDRAM ++ * Initialization and Configuration", 3.3.1 SDelay--MBAR + 0x0190: ++ * ++ * "The SDelay should be written to a value of 0x00000004. It is ++ * required to account for changes caused by normal wafer processing ++ * parameters." ++ */ ++ svr = get_svr(); ++ pvr = get_pvr(); ++ if ((SVR_MJREV(svr) >= 2) && (PVR_MAJ(pvr) == 1) && (PVR_MIN(pvr) == 4)) { ++ *(vu_long *)MPC5XXX_SDRAM_SDELAY = 0x04; ++ __asm__ volatile ("sync"); ++ } ++ + return dramsize + dramsize2; + } + +diff -Naupr u-boot-1.1.6/board/mpc8349emds/Makefile u-boot-1.1.6-fsl-1/board/mpc8349emds/Makefile +--- u-boot-1.1.6/board/mpc8349emds/Makefile 2006-11-02 08:15:01.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/board/mpc8349emds/Makefile 2006-11-10 11:24:28.000000000 -0600 +@@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk + + LIB = $(obj)lib$(BOARD).a + +-COBJS := $(BOARD).o ++COBJS := $(BOARD).o pci.o + + SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) + OBJS := $(addprefix $(obj),$(COBJS)) +diff -Naupr u-boot-1.1.6/board/mpc8349emds/mpc8349emds.c u-boot-1.1.6-fsl-1/board/mpc8349emds/mpc8349emds.c +--- u-boot-1.1.6/board/mpc8349emds/mpc8349emds.c 2006-11-02 08:15:01.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/board/mpc8349emds/mpc8349emds.c 2006-11-10 11:24:28.000000000 -0600 +@@ -33,6 +33,10 @@ + #if defined(CONFIG_SPD_EEPROM) + #include <spd_sdram.h> + #endif ++#if defined(CONFIG_OF_FLAT_TREE) ++#include <ft_build.h> ++#endif ++ + int fixed_sdram(void); + void sdram_init(void); + +@@ -59,7 +63,7 @@ int board_early_init_f (void) + + long int initdram (int board_type) + { +- volatile immap_t *im = (immap_t *)CFG_IMMRBAR; ++ volatile immap_t *im = (immap_t *)CFG_IMMR; + u32 msize = 0; + + if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im) +@@ -96,7 +100,7 @@ long int initdram (int board_type) + ************************************************************************/ + int fixed_sdram(void) + { +- volatile immap_t *im = (immap_t *)CFG_IMMRBAR; ++ volatile immap_t *im = (immap_t *)CFG_IMMR; + u32 msize = 0; + u32 ddr_size; + u32 ddr_size_log2; +@@ -167,8 +171,8 @@ int checkboard (void) + + void sdram_init(void) + { +- volatile immap_t *immap = (immap_t *)CFG_IMMRBAR; +- volatile lbus8349_t *lbc= &immap->lbus; ++ volatile immap_t *immap = (immap_t *)CFG_IMMR; ++ volatile lbus83xx_t *lbc= &immap->lbus; + uint *sdram_addr = (uint *)CFG_LBC_SDRAM_BASE; + + puts("\n SDRAM on Local Bus: "); +@@ -245,8 +249,8 @@ void sdram_init(void) + */ + void ecc_print_status(void) + { +- volatile immap_t *immap = (immap_t *)CFG_IMMRBAR; +- volatile ddr8349_t *ddr = &immap->ddr; ++ volatile immap_t *immap = (immap_t *)CFG_IMMR; ++ volatile ddr83xx_t *ddr = &immap->ddr; + + printf("\nECC mode: %s\n\n", (ddr->sdram_cfg & SDRAM_CFG_ECC_EN) ? "ON" : "OFF"); + +@@ -320,8 +324,8 @@ void ecc_print_status(void) + + int do_ecc ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) + { +- volatile immap_t *immap = (immap_t *)CFG_IMMRBAR; +- volatile ddr8349_t *ddr = &immap->ddr; ++ volatile immap_t *immap = (immap_t *)CFG_IMMR; ++ volatile ddr83xx_t *ddr = &immap->ddr; + volatile u32 val; + u64 *addr, count, val64; + register u64 *i; +@@ -564,3 +568,23 @@ U_BOOT_CMD( + " - re-inits memory" + ); + #endif /* if defined(CONFIG_DDR_ECC) && defined(CONFIG_DDR_ECC_CMD) */ ++ ++#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP) ++void ++ft_board_setup(void *blob, bd_t *bd) ++{ ++ u32 *p; ++ int len; ++ ++#ifdef CONFIG_PCI ++ ft_pci_setup(blob, bd); ++#endif ++ ft_cpu_setup(blob, bd); ++ ++ p = ft_get_prop(blob, "/memory/reg", &len); ++ if (p != NULL) { ++ *p++ = cpu_to_be32(bd->bi_memstart); ++ *p = cpu_to_be32(bd->bi_memsize); ++ } ++} ++#endif +diff -Naupr u-boot-1.1.6/board/mpc8349emds/pci.c u-boot-1.1.6-fsl-1/board/mpc8349emds/pci.c +--- u-boot-1.1.6/board/mpc8349emds/pci.c 2006-11-02 08:15:01.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/board/mpc8349emds/pci.c 2006-12-06 10:33:49.000000000 -0600 +@@ -68,12 +68,13 @@ static struct pci_controller pci_hose[] + void + pib_init(void) + { +- u8 val8; ++ u8 val8, orig_i2c_bus; + /* + * Assign PIB PMC slot to desired PCI bus + */ +- mpc8349_i2c = (i2c_t*)(CFG_IMMRBAR + CFG_I2C2_OFFSET); +- i2c_init(CFG_I2C_SPEED, CFG_I2C_SLAVE); ++ /* Switch temporarily to I2C bus #2 */ ++ orig_i2c_bus = i2c_get_bus_num(); ++ i2c_set_bus_num(1); + + val8 = 0; + i2c_write(0x23, 0x6, 1, &val8, 1); +@@ -118,6 +119,8 @@ pib_init(void) + printf("PCI1: 32-bit on PMC1, PMC2\n"); + printf("PCI2: 32-bit on PMC3\n"); + #endif ++ /* Reset to original I2C bus */ ++ i2c_set_bus_num(orig_i2c_bus); + } + + /************************************************************************** +@@ -130,18 +133,18 @@ void + pci_init_board(void) + { + volatile immap_t * immr; +- volatile clk8349_t * clk; +- volatile law8349_t * pci_law; +- volatile pot8349_t * pci_pot; +- volatile pcictrl8349_t * pci_ctrl; +- volatile pciconf8349_t * pci_conf; ++ volatile clk83xx_t * clk; ++ volatile law83xx_t * pci_law; ++ volatile pot83xx_t * pci_pot; ++ volatile pcictrl83xx_t * pci_ctrl; ++ volatile pciconf83xx_t * pci_conf; + u16 reg16; + u32 reg32; + u32 dev; + struct pci_controller * hose; + +- immr = (immap_t *)CFG_IMMRBAR; +- clk = (clk8349_t *)&immr->clk; ++ immr = (immap_t *)CFG_IMMR; ++ clk = (clk83xx_t *)&immr->clk; + pci_law = immr->sysconf.pcilaw; + pci_pot = immr->ios.pot; + pci_ctrl = immr->pci_ctrl; +@@ -254,8 +257,8 @@ pci_init_board(void) + hose->region_count = 4; + + pci_setup_indirect(hose, +- (CFG_IMMRBAR+0x8300), +- (CFG_IMMRBAR+0x8304)); ++ (CFG_IMMR+0x8300), ++ (CFG_IMMR+0x8304)); + + pci_register_hose(hose); + +@@ -350,8 +353,8 @@ pci_init_board(void) + hose->region_count = 4; + + pci_setup_indirect(hose, +- (CFG_IMMRBAR+0x8380), +- (CFG_IMMRBAR+0x8384)); ++ (CFG_IMMR+0x8380), ++ (CFG_IMMR+0x8384)); + + pci_register_hose(hose); + +@@ -379,4 +382,26 @@ pci_init_board(void) + + } + ++#ifdef CONFIG_OF_FLAT_TREE ++void ++ft_pci_setup(void *blob, bd_t *bd) ++{ ++ u32 *p; ++ int len; ++ ++ p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@8500/bus-range", &len); ++ if (p != NULL) { ++ p[0] = pci_hose[0].first_busno; ++ p[1] = pci_hose[0].last_busno; ++ } ++ ++#ifdef CONFIG_MPC83XX_PCI2 ++ p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@8600/bus-range", &len); ++ if (p != NULL) { ++ p[0] = pci_hose[1].first_busno; ++ p[1] = pci_hose[1].last_busno; ++ } ++#endif ++} ++#endif /* CONFIG_OF_FLAT_TREE */ + #endif /* CONFIG_PCI */ +diff -Naupr u-boot-1.1.6/board/mpc8349itx/config.mk u-boot-1.1.6-fsl-1/board/mpc8349itx/config.mk +--- u-boot-1.1.6/board/mpc8349itx/config.mk 1969-12-31 18:00:00.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/board/mpc8349itx/config.mk 2006-11-10 11:24:28.000000000 -0600 +@@ -0,0 +1,33 @@ ++# ++# Copyright (C) Freescale Semiconductor, Inc. 2006. All rights reserved. ++# ++# See file CREDITS for list of people who contributed to this ++# project. ++# ++# This program is free software; you can redistribute it and/or ++# modify it under the terms of the GNU General Public License as ++# published by the Free Software Foundation; either version 2 of ++# the License, or (at your option) any later version. ++# ++# This program is distributed in the hope that it will be useful, ++# but WITHOUT ANY WARRANTY; without even the implied warranty of ++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++# GNU General Public License for more details. ++# ++# You should have received a copy of the GNU General Public License ++# along with this program; if not, write to the Free Software ++# Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++# MA 02111-1307 USA ++# ++ ++# ++# MPC8349ITX ++# ++ ++TEXT_BASE = 0xFEF00000 ++ ++ifneq ($(OBJTREE),$(SRCTREE)) ++# We are building u-boot in a separate directory, use generated ++# .lds script from OBJTREE directory. ++LDSCRIPT := $(OBJTREE)/board/$(BOARDDIR)/u-boot.lds ++endif +diff -Naupr u-boot-1.1.6/board/mpc8349itx/Makefile u-boot-1.1.6-fsl-1/board/mpc8349itx/Makefile +--- u-boot-1.1.6/board/mpc8349itx/Makefile 1969-12-31 18:00:00.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/board/mpc8349itx/Makefile 2006-11-10 11:24:28.000000000 -0600 +@@ -0,0 +1,48 @@ ++# ++# Copyright (C) Freescale Semiconductor, Inc. 2006. All rights reserved. ++# ++# See file CREDITS for list of people who contributed to this ++# project. ++# ++# This program is free software; you can redistribute it and/or ++# modify it under the terms of the GNU General Public License as ++# published by the Free Software Foundation; either version 2 of ++# the License, or (at your option) any later version. ++# ++# This program is distributed in the hope that it will be useful, ++# but WITHOUT ANY WARRANTY; without even the implied warranty of ++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++# GNU General Public License for more details. ++# ++# You should have received a copy of the GNU General Public License ++# along with this program; if not, write to the Free Software ++# Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++# MA 02111-1307 USA ++# ++ ++include $(TOPDIR)/config.mk ++ ++LIB = $(obj)lib$(BOARD).a ++ ++COBJS := $(BOARD).o pci.o ++ ++SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) ++OBJS := $(addprefix $(obj),$(COBJS)) ++SOBJS := $(addprefix $(obj),$(SOBJS)) ++ ++$(LIB): $(obj).depend $(OBJS) ++ $(AR) crv $@ $(OBJS) ++ ++clean: ++ rm -f $(SOBJS) $(OBJS) ++ ++distclean: clean ++ rm -f $(LIB) core *.bak .depend ++ ++######################################################################### ++ ++include $(SRCTREE)/rules.mk ++ ++sinclude $(obj).depend ++ ++######################################################################### +diff -Naupr u-boot-1.1.6/board/mpc8349itx/mpc8349itx.c u-boot-1.1.6-fsl-1/board/mpc8349itx/mpc8349itx.c +--- u-boot-1.1.6/board/mpc8349itx/mpc8349itx.c 1969-12-31 18:00:00.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/board/mpc8349itx/mpc8349itx.c 2006-11-30 12:34:13.000000000 -0600 +@@ -0,0 +1,477 @@ ++/* ++ * Copyright (C) Freescale Semiconductor, Inc. 2006. All rights reserved. ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS for A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#include <common.h> ++#include <ioports.h> ++#include <mpc83xx.h> ++#include <i2c.h> ++#include <spd.h> ++#include <miiphy.h> ++ ++#ifdef CONFIG_PCI ++#include <asm/mpc8349_pci.h> ++#include <pci.h> ++#endif ++ ++#ifdef CONFIG_SPD_EEPROM ++#include <spd_sdram.h> ++#else ++#include <asm/mmu.h> ++#endif ++#if defined(CONFIG_OF_FLAT_TREE) ++#include <ft_build.h> ++#endif ++ ++#ifndef CONFIG_SPD_EEPROM ++/************************************************************************* ++ * fixed sdram init -- doesn't use serial presence detect. ++ ************************************************************************/ ++int fixed_sdram(void) ++{ ++ volatile immap_t *im = (immap_t *) CFG_IMMR; ++ u32 ddr_size; /* The size of RAM, in bytes */ ++ u32 ddr_size_log2 = 0; ++ ++ for (ddr_size = CFG_DDR_SIZE * 0x100000; ddr_size > 1; ddr_size >>= 1) { ++ if (ddr_size & 1) { ++ return -1; ++ } ++ ddr_size_log2++; ++ } ++ ++ im->sysconf.ddrlaw[0].ar = ++ LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE); ++ im->sysconf.ddrlaw[0].bar = (CFG_DDR_SDRAM_BASE >> 12) & 0xfffff; ++ ++ /* Only one CS0 for DDR */ ++ im->ddr.csbnds[0].csbnds = 0x0000000f; ++ im->ddr.cs_config[0] = CFG_DDR_CONFIG; ++ ++ debug("cs0_bnds = 0x%08x\n", im->ddr.csbnds[0].csbnds); ++ debug("cs0_config = 0x%08x\n", im->ddr.cs_config[0]); ++ ++ debug("DDR:bar=0x%08x\n", im->sysconf.ddrlaw[0].bar); ++ debug("DDR:ar=0x%08x\n", im->sysconf.ddrlaw[0].ar); ++ ++ im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1; ++ im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2;/* Was "2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT" */ ++ im->ddr.sdram_cfg = SDRAM_CFG_SREN | SDRAM_CFG_SDRAM_TYPE_DDR; ++ im->ddr.sdram_mode = ++ (0x0000 << SDRAM_MODE_ESD_SHIFT) | (0x0032 << SDRAM_MODE_SD_SHIFT); ++ im->ddr.sdram_interval = ++ (0x0410 << SDRAM_INTERVAL_REFINT_SHIFT) | (0x0100 << ++ SDRAM_INTERVAL_BSTOPRE_SHIFT); ++ im->ddr.sdram_clk_cntl = ++ DDR_SDRAM_CLK_CNTL_SS_EN | DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05; ++ ++ udelay(200); ++ ++ im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN; ++ ++ debug("DDR:timing_cfg_1=0x%08x\n", im->ddr.timing_cfg_1); ++ debug("DDR:timing_cfg_2=0x%08x\n", im->ddr.timing_cfg_2); ++ debug("DDR:sdram_mode=0x%08x\n", im->ddr.sdram_mode); ++ debug("DDR:sdram_interval=0x%08x\n", im->ddr.sdram_interval); ++ debug("DDR:sdram_cfg=0x%08x\n", im->ddr.sdram_cfg); ++ ++ return CFG_DDR_SIZE; ++} ++#endif ++ ++#ifdef CONFIG_PCI ++/* ++ * Initialize PCI Devices, report devices found ++ */ ++#ifndef CONFIG_PCI_PNP ++static struct pci_config_table pci_mpc83xxmitx_config_table[] = { ++ { ++ PCI_ANY_ID, ++ PCI_ANY_ID, ++ PCI_ANY_ID, ++ PCI_ANY_ID, ++ 0x0f, ++ PCI_ANY_ID, ++ pci_cfgfunc_config_device, ++ { ++ PCI_ENET0_IOADDR, ++ PCI_ENET0_MEMADDR, ++ PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER} ++ }, ++ {} ++} ++#endif ++ ++volatile static struct pci_controller hose[] = { ++ { ++#ifndef CONFIG_PCI_PNP ++ config_table:pci_mpc83xxmitx_config_table, ++#endif ++ }, ++ { ++#ifndef CONFIG_PCI_PNP ++ config_table:pci_mpc83xxmitx_config_table, ++#endif ++ } ++}; ++#endif /* CONFIG_PCI */ ++ ++/* If MPC8349E-mITX is soldered with SDRAM, then initialize it. */ ++ ++void sdram_init(void) ++{ ++ volatile immap_t *immap = (immap_t *) CFG_IMMR; ++ volatile lbus83xx_t *lbc = &immap->lbus; ++ ++#if defined(CFG_BR2_PRELIM) \ ++ && defined(CFG_OR2_PRELIM) \ ++ && defined(CFG_LBLAWBAR2_PRELIM) \ ++ && defined(CFG_LBLAWAR2_PRELIM) \ ++ && !defined(CONFIG_COMPACT_FLASH) ++ ++ uint *sdram_addr = (uint *) CFG_LBC_SDRAM_BASE; ++ ++ puts("\n SDRAM on Local Bus: "); ++ print_size(CFG_LBC_SDRAM_SIZE * 1024 * 1024, "\n"); ++ ++ /* ++ * Setup SDRAM Base and Option Registers, already done in cpu_init.c ++ */ ++ ++ /*setup mtrpt, lsrt and lbcr for LB bus */ ++ lbc->lbcr = CFG_LBC_LBCR; ++ lbc->mrtpr = CFG_LBC_MRTPR; ++ lbc->lsrt = CFG_LBC_LSRT; ++ asm("sync"); ++ ++ /* ++ * Configure the SDRAM controller Machine Mode register. ++ */ ++ lbc->lsdmr = CFG_LBC_LSDMR_5; /* 0x40636733; normal operation */ ++ ++ lbc->lsdmr = CFG_LBC_LSDMR_1; /*0x68636733; precharge all the banks */ ++ asm("sync"); ++ *sdram_addr = 0xff; ++ udelay(100); ++ ++ lbc->lsdmr = CFG_LBC_LSDMR_2; /*0x48636733; auto refresh */ ++ asm("sync"); ++ *sdram_addr = 0xff; /*1 time*/ ++ udelay(100); ++ *sdram_addr = 0xff; /*2 times*/ ++ udelay(100); ++ *sdram_addr = 0xff; /*3 times*/ ++ udelay(100); ++ *sdram_addr = 0xff; /*4 times*/ ++ udelay(100); ++ *sdram_addr = 0xff; /*5 times*/ ++ udelay(100); ++ *sdram_addr = 0xff; /*6 times*/ ++ udelay(100); ++ *sdram_addr = 0xff; /*7 times*/ ++ udelay(100); ++ *sdram_addr = 0xff; /*8 times*/ ++ udelay(100); ++ ++ lbc->lsdmr = CFG_LBC_LSDMR_4; /*0x58636733;mode register write operation */ ++ asm("sync"); ++ *sdram_addr = 0xff; ++ udelay(100); ++ ++ lbc->lsdmr = CFG_LBC_LSDMR_5; /*0x40636733;normal operation */ ++ asm("sync"); ++ *sdram_addr = 0xff; ++ udelay(100); ++ ++#else ++ puts("SDRAM on Local Bus is NOT available!\n"); ++ ++#ifdef CFG_BR2_PRELIM ++ lbc->bank[2].br = CFG_BR2_PRELIM; ++ lbc->bank[2].or = CFG_OR2_PRELIM; ++#endif ++ ++#ifdef CFG_BR3_PRELIM ++ lbc->bank[3].br = CFG_BR3_PRELIM; ++ lbc->bank[3].or = CFG_OR3_PRELIM; ++#endif ++#endif ++} ++ ++long int initdram(int board_type) ++{ ++ volatile immap_t *im = (immap_t *) CFG_IMMR; ++ u32 msize = 0; ++#ifdef CONFIG_DDR_ECC ++ volatile ddr83xx_t *ddr = &im->ddr; ++#endif ++ ++ if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32) im) ++ return -1; ++ ++ /* DDR SDRAM - Main SODIMM */ ++ im->sysconf.ddrlaw[0].bar = CFG_DDR_BASE & LAWBAR_BAR; ++#ifdef CONFIG_SPD_EEPROM ++ msize = spd_sdram(); ++#else ++ msize = fixed_sdram(); ++#endif ++ ++#ifdef CONFIG_DDR_ECC ++ if (ddr->sdram_cfg & SDRAM_CFG_ECC_EN) ++ /* Unlike every other board, on the 83xx spd_sdram() returns ++ megabytes instead of just bytes. That's why we need to ++ multiple by 1MB when calling ddr_enable_ecc(). */ ++ ddr_enable_ecc(msize * 1048576); ++#endif ++ ++ /* ++ * Initialize SDRAM if it is on local bus. ++ */ ++ sdram_init(); ++ puts(" DDR RAM: "); ++ /* return total bus SDRAM size(bytes) -- DDR */ ++ return msize * 1024 * 1024; ++} ++ ++int checkboard(void) ++{ ++ puts("Board: Freescale MPC8349E-mITX\n"); ++ ++ return 0; ++} ++ ++/* ++ * Implement a work-around for a hardware problem with compact ++ * flash. ++ * ++ * Program the UPM if compact flash is enabled. ++ */ ++int misc_init_f(void) ++{ ++ volatile u32 *vsc7385_cpuctrl; ++ ++ /* 0x1c0c0 is the VSC7385 CPU Control (CPUCTRL) Register. The power up ++ default of VSC7385 L1_IRQ and L2_IRQ requests are active high. That ++ means it is 0 when the IRQ is not active. This makes the wire-AND ++ logic always assert IRQ7 to CPU even if there is no request from the ++ switch. Since the compact flash and the switch share the same IRQ, ++ the Linux kernel will think that the compact flash is requesting irq ++ and get stuck when it tries to clear the IRQ. Thus we need to set ++ the L2_IRQ0 and L2_IRQ1 to active low. ++ ++ The following code sets the L1_IRQ and L2_IRQ polarity to active low. ++ Without this code, compact flash will not work in Linux because ++ unlike U-Boot, Linux uses the IRQ, so this code is necessary if we ++ don't enable compact flash for U-Boot. ++ */ ++ ++ vsc7385_cpuctrl = (volatile u32 *)(CFG_VSC7385_BASE + 0x1c0c0); ++ *vsc7385_cpuctrl |= 0x0c; ++ ++#ifdef CONFIG_COMPACT_FLASH ++ /* UPM Table Configuration Code */ ++ static uint UPMATable[] = { ++ 0xcffffc00, 0x0fffff00, 0x0fafff00, 0x0fafff00, ++ 0x0faffd00, 0x0faffc04, 0x0ffffc00, 0x3ffffc01, ++ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, ++ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, ++ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfff7fc00, ++ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01, ++ 0xcffffc00, 0x0fffff00, 0x0ff3ff00, 0x0ff3ff00, ++ 0x0ff3fe00, 0x0ffffc00, 0x3ffffc05, 0xfffffc00, ++ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, ++ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, ++ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, ++ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01, ++ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, ++ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, ++ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01, ++ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01 ++ }; ++ volatile immap_t *immap = (immap_t *) CFG_IMMR; ++ volatile lbus83xx_t *lbus = &immap->lbus; ++ ++ lbus->bank[3].br = CFG_BR3_PRELIM; ++ lbus->bank[3].or = CFG_OR3_PRELIM; ++ ++ /* Program the MAMR. RFEN=0, OP=00, UWPL=1, AM=000, DS=01, G0CL=000, ++ GPL4=0, RLF=0001, WLF=0001, TLF=0001, MAD=000000 ++ */ ++ lbus->mamr = 0x08404440; ++ ++ upmconfig(0, UPMATable, sizeof(UPMATable) / sizeof(UPMATable[0])); ++ ++ puts("UPMA: Configured for compact flash\n"); ++#endif ++ ++ return 0; ++} ++ ++/* ++ * Make sure the EEPROM has the HRCW correctly programmed. ++ * Make sure the RTC is correctly programmed. ++ * ++ * The MPC8349E-mITX can be configured to load the HRCW from ++ * EEPROM instead of flash. This is controlled via jumpers ++ * LGPL0, 1, and 3. Normally, these jumpers are set to 000 (all ++ * jumpered), but if they're set to 001 or 010, then the HRCW is ++ * read from the "I2C EEPROM". ++ * ++ * This function makes sure that the I2C EEPROM is programmed ++ * correctly. ++ */ ++int misc_init_r(void) ++{ ++ int rc = 0; ++ ++#ifdef CONFIG_HARD_I2C ++ ++ unsigned int orig_bus = i2c_get_bus_num();; ++ u8 i2c_data; ++ ++#ifdef CFG_I2C_RTC_ADDR ++ u8 ds1339_data[17]; ++#endif ++ ++#ifdef CFG_I2C_EEPROM_ADDR ++ static u8 eeprom_data[] = /* HRCW data */ ++ { ++ 0xaa, 0x55, 0xaa, ++ 0x7c, 0x02, 0x40, 0x05, 0x04, 0x00, 0x00, ++ 0x7c, 0x02, 0x41, 0xb4, 0x60, 0xa0, 0x00, ++ }; ++ ++ u8 data[sizeof(eeprom_data)]; ++#endif ++ ++ printf("Board revision: "); ++ i2c_set_bus_num(1); ++ if (i2c_read(CFG_I2C_8574A_ADDR2, 0, 0, &i2c_data, sizeof(i2c_data)) == 0) ++ printf("%u.%u (PCF8475A)\n", (i2c_data & 0x02) >> 1, i2c_data & 0x01); ++ else if (i2c_read(CFG_I2C_8574_ADDR2, 0, 0, &i2c_data, sizeof(i2c_data)) == 0) ++ printf("%u.%u (PCF8475)\n", (i2c_data & 0x02) >> 1, i2c_data & 0x01); ++ else { ++ printf("Unknown\n"); ++ rc = 1; ++ } ++ ++#ifdef CFG_I2C_EEPROM_ADDR ++ i2c_set_bus_num(0); ++ ++ if (i2c_read(CFG_I2C_EEPROM_ADDR, 0, 2, data, sizeof(data)) == 0) { ++ if (memcmp(data, eeprom_data, sizeof(data)) != 0) { ++ if (i2c_write ++ (CFG_I2C_EEPROM_ADDR, 0, 2, eeprom_data, ++ sizeof(eeprom_data)) != 0) { ++ puts("Failure writing the HRCW to EEPROM via I2C.\n"); ++ rc = 1; ++ } ++ } ++ } else { ++ puts("Failure reading the HRCW from EEPROM via I2C.\n"); ++ rc = 1; ++ } ++#endif ++ ++#ifdef CFG_I2C_RTC_ADDR ++ i2c_set_bus_num(1); ++ ++ if (i2c_read(CFG_I2C_RTC_ADDR, 0, 1, ds1339_data, sizeof(ds1339_data)) ++ == 0) { ++ ++ /* Work-around for MPC8349E-mITX bug #13601. ++ If the RTC does not contain valid register values, the DS1339 ++ Linux driver will not work. ++ */ ++ ++ /* Make sure status register bits 6-2 are zero */ ++ ds1339_data[0x0f] &= ~0x7c; ++ ++ /* Check for a valid day register value */ ++ ds1339_data[0x03] &= ~0xf8; ++ if (ds1339_data[0x03] == 0) { ++ ds1339_data[0x03] = 1; ++ } ++ ++ /* Check for a valid date register value */ ++ ds1339_data[0x04] &= ~0xc0; ++ if ((ds1339_data[0x04] == 0) || ++ ((ds1339_data[0x04] & 0x0f) > 9) || ++ (ds1339_data[0x04] >= 0x32)) { ++ ds1339_data[0x04] = 1; ++ } ++ ++ /* Check for a valid month register value */ ++ ds1339_data[0x05] &= ~0x60; ++ ++ if ((ds1339_data[0x05] == 0) || ++ ((ds1339_data[0x05] & 0x0f) > 9) || ++ ((ds1339_data[0x05] >= 0x13) ++ && (ds1339_data[0x05] <= 0x19))) { ++ ds1339_data[0x05] = 1; ++ } ++ ++ /* Enable Oscillator and rate select */ ++ ds1339_data[0x0e] = 0x1c; ++ ++ /* Work-around for MPC8349E-mITX bug #13330. ++ Ensure that the RTC control register contains the value 0x1c. ++ This affects SATA performance. ++ */ ++ ++ if (i2c_write ++ (CFG_I2C_RTC_ADDR, 0, 1, ds1339_data, ++ sizeof(ds1339_data))) { ++ puts("Failure writing to the RTC via I2C.\n"); ++ rc = 1; ++ } ++ } else { ++ puts("Failure reading from the RTC via I2C.\n"); ++ rc = 1; ++ } ++#endif ++ ++ i2c_set_bus_num(orig_bus); ++#endif ++ ++ return rc; ++} ++ ++#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP) ++void ++ft_board_setup(void *blob, bd_t *bd) ++{ ++ u32 *p; ++ int len; ++ ++#ifdef CONFIG_PCI ++ ft_pci_setup(blob, bd); ++#endif ++ ft_cpu_setup(blob, bd); ++ ++ p = ft_get_prop(blob, "/memory/reg", &len); ++ if (p != NULL) { ++ *p++ = cpu_to_be32(bd->bi_memstart); ++ *p = cpu_to_be32(bd->bi_memsize); ++ } ++} ++#endif +diff -Naupr u-boot-1.1.6/board/mpc8349itx/pci.c u-boot-1.1.6-fsl-1/board/mpc8349itx/pci.c +--- u-boot-1.1.6/board/mpc8349itx/pci.c 1969-12-31 18:00:00.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/board/mpc8349itx/pci.c 2006-11-10 11:24:28.000000000 -0600 +@@ -0,0 +1,357 @@ ++/* ++ * Copyright (C) Freescale Semiconductor, Inc. 2006. All rights reserved. ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#include <common.h> ++ ++#ifdef CONFIG_PCI ++ ++#include <asm/mmu.h> ++#include <asm/global_data.h> ++#include <pci.h> ++#include <asm/mpc8349_pci.h> ++#include <i2c.h> ++#if defined(CONFIG_OF_FLAT_TREE) ++#include <ft_build.h> ++#endif ++ ++DECLARE_GLOBAL_DATA_PTR; ++ ++/* System RAM mapped to PCI space */ ++#define CONFIG_PCI_SYS_MEM_BUS CFG_SDRAM_BASE ++#define CONFIG_PCI_SYS_MEM_PHYS CFG_SDRAM_BASE ++ ++#ifndef CONFIG_PCI_PNP ++static struct pci_config_table pci_mpc8349itx_config_table[] = { ++ { ++ PCI_ANY_ID, ++ PCI_ANY_ID, ++ PCI_ANY_ID, ++ PCI_ANY_ID, ++ PCI_IDSEL_NUMBER, ++ PCI_ANY_ID, ++ pci_cfgfunc_config_device, ++ { ++ PCI_ENET0_IOADDR, ++ PCI_ENET0_MEMADDR, ++ PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER} ++ }, ++ {} ++}; ++#endif ++ ++static struct pci_controller pci_hose[] = { ++ { ++#ifndef CONFIG_PCI_PNP ++ config_table:pci_mpc8349itx_config_table, ++#endif ++ }, ++ { ++#ifndef CONFIG_PCI_PNP ++ config_table:pci_mpc8349itx_config_table, ++#endif ++ } ++}; ++ ++/************************************************************************** ++ * pci_init_board() ++ * ++ * NOTICE: PCI2 is not currently supported ++ * ++ */ ++void pci_init_board(void) ++{ ++ volatile immap_t *immr; ++ volatile clk83xx_t *clk; ++ volatile law83xx_t *pci_law; ++ volatile pot83xx_t *pci_pot; ++ volatile pcictrl83xx_t *pci_ctrl; ++ volatile pciconf83xx_t *pci_conf; ++ u8 reg8; ++ u16 reg16; ++ u32 reg32; ++ u32 dev; ++ struct pci_controller *hose; ++ ++ immr = (immap_t *) CFG_IMMR; ++ clk = (clk83xx_t *) & immr->clk; ++ pci_law = immr->sysconf.pcilaw; ++ pci_pot = immr->ios.pot; ++ pci_ctrl = immr->pci_ctrl; ++ pci_conf = immr->pci_conf; ++ ++ hose = &pci_hose[0]; ++ ++ /* ++ * Configure PCI controller and PCI_CLK_OUTPUT both in 66M mode ++ */ ++ ++ reg32 = clk->occr; ++ udelay(2000); ++ ++#ifdef CONFIG_HARD_I2C ++ i2c_set_bus_num(1); ++ /* Read the PCI_M66EN jumper setting */ ++ if ((i2c_read(CFG_I2C_8574_ADDR2, 0, 0, ®8, sizeof(reg8)) == 0) || ++ (i2c_read(CFG_I2C_8574A_ADDR2, 0, 0, ®8, sizeof(reg8)) == 0)) { ++ if (reg8 & I2C_8574_PCI66) ++ clk->occr = 0xff000000; /* 66 MHz PCI */ ++ else ++ clk->occr = 0xff600001; /* 33 MHz PCI */ ++ } else { ++ clk->occr = 0xff600001; /* 33 MHz PCI */ ++ } ++#else ++ clk->occr = 0xff000000; /* 66 MHz PCI */ ++#endif ++ ++ udelay(2000); ++ ++ /* ++ * Release PCI RST Output signal ++ */ ++ pci_ctrl[0].gcr = 0; ++ udelay(2000); ++ pci_ctrl[0].gcr = 1; ++ ++#ifdef CONFIG_MPC83XX_PCI2 ++ pci_ctrl[1].gcr = 0; ++ udelay(2000); ++ pci_ctrl[1].gcr = 1; ++#endif ++ ++ /* We need to wait at least a 1sec based on PCI specs */ ++ { ++ int i; ++ ++ for (i = 0; i < 1000; i++) ++ udelay(1000); ++ } ++ ++ /* ++ * Configure PCI Local Access Windows ++ */ ++ pci_law[0].bar = CFG_PCI1_MEM_PHYS & LAWBAR_BAR; ++ pci_law[0].ar = LAWAR_EN | LAWAR_SIZE_1G; ++ ++ pci_law[1].bar = CFG_PCI1_IO_PHYS & LAWBAR_BAR; ++ pci_law[1].ar = LAWAR_EN | LAWAR_SIZE_32M; ++ ++ /* ++ * Configure PCI Outbound Translation Windows ++ */ ++ ++ /* PCI1 mem space - prefetch */ ++ pci_pot[0].potar = (CFG_PCI1_MEM_BASE >> 12) & POTAR_TA_MASK; ++ pci_pot[0].pobar = (CFG_PCI1_MEM_PHYS >> 12) & POBAR_BA_MASK; ++ pci_pot[0].pocmr = POCMR_EN | POCMR_PREFETCH_EN | POCMR_CM_256M; ++ ++ /* PCI1 IO space */ ++ pci_pot[1].potar = (CFG_PCI1_IO_BASE >> 12) & POTAR_TA_MASK; ++ pci_pot[1].pobar = (CFG_PCI1_IO_PHYS >> 12) & POBAR_BA_MASK; ++ pci_pot[1].pocmr = POCMR_EN | POCMR_IO | POCMR_CM_16M; ++ ++ /* PCI1 mmio - non-prefetch mem space */ ++ pci_pot[2].potar = (CFG_PCI1_MMIO_BASE >> 12) & POTAR_TA_MASK; ++ pci_pot[2].pobar = (CFG_PCI1_MMIO_PHYS >> 12) & POBAR_BA_MASK; ++ pci_pot[2].pocmr = POCMR_EN | POCMR_CM_256M; ++ ++ /* ++ * Configure PCI Inbound Translation Windows ++ */ ++ ++ /* we need RAM mapped to PCI space for the devices to ++ * access main memory */ ++ pci_ctrl[0].pitar1 = 0x0; ++ pci_ctrl[0].pibar1 = 0x0; ++ pci_ctrl[0].piebar1 = 0x0; ++ pci_ctrl[0].piwar1 = PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP | ++ PIWAR_WTT_SNOOP | (__ilog2(gd->ram_size) - 1); ++ ++ hose->first_busno = 0; ++ hose->last_busno = 0xff; ++ ++ /* PCI memory prefetch space */ ++ pci_set_region(hose->regions + 0, ++ CFG_PCI1_MEM_BASE, ++ CFG_PCI1_MEM_PHYS, ++ CFG_PCI1_MEM_SIZE, PCI_REGION_MEM | PCI_REGION_PREFETCH); ++ ++ /* PCI memory space */ ++ pci_set_region(hose->regions + 1, ++ CFG_PCI1_MMIO_BASE, ++ CFG_PCI1_MMIO_PHYS, CFG_PCI1_MMIO_SIZE, PCI_REGION_MEM); ++ ++ /* PCI IO space */ ++ pci_set_region(hose->regions + 2, ++ CFG_PCI1_IO_BASE, ++ CFG_PCI1_IO_PHYS, CFG_PCI1_IO_SIZE, PCI_REGION_IO); ++ ++ /* System memory space */ ++ pci_set_region(hose->regions + 3, ++ CONFIG_PCI_SYS_MEM_BUS, ++ CONFIG_PCI_SYS_MEM_PHYS, ++ gd->ram_size, PCI_REGION_MEM | PCI_REGION_MEMORY); ++ ++ hose->region_count = 4; ++ ++ pci_setup_indirect(hose, ++ (CFG_IMMR + 0x8300), (CFG_IMMR + 0x8304)); ++ ++ pci_register_hose(hose); ++ ++ /* ++ * Write to Command register ++ */ ++ reg16 = 0xff; ++ dev = PCI_BDF(hose->first_busno, 0, 0); ++ pci_hose_read_config_word(hose, dev, PCI_COMMAND, ®16); ++ reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; ++ pci_hose_write_config_word(hose, dev, PCI_COMMAND, reg16); ++ ++ /* ++ * Clear non-reserved bits in status register. ++ */ ++ pci_hose_write_config_word(hose, dev, PCI_STATUS, 0xffff); ++ pci_hose_write_config_byte(hose, dev, PCI_LATENCY_TIMER, 0x80); ++ pci_hose_write_config_byte(hose, dev, PCI_CACHE_LINE_SIZE, 0x08); ++ ++#ifdef CONFIG_PCI_SCAN_SHOW ++ printf("PCI: Bus Dev VenId DevId Class Int\n"); ++#endif ++ /* ++ * Hose scan. ++ */ ++ hose->last_busno = pci_hose_scan(hose); ++ ++#ifdef CONFIG_MPC83XX_PCI2 ++ hose = &pci_hose[1]; ++ ++ /* ++ * Configure PCI Outbound Translation Windows ++ */ ++ ++ /* PCI2 mem space - prefetch */ ++ pci_pot[3].potar = (CFG_PCI2_MEM_BASE >> 12) & POTAR_TA_MASK; ++ pci_pot[3].pobar = (CFG_PCI2_MEM_PHYS >> 12) & POBAR_BA_MASK; ++ pci_pot[3].pocmr = POCMR_EN | POCMR_PCI2 | POCMR_PREFETCH_EN | POCMR_CM_256M; ++ ++ /* PCI2 IO space */ ++ pci_pot[4].potar = (CFG_PCI2_IO_BASE >> 12) & POTAR_TA_MASK; ++ pci_pot[4].pobar = (CFG_PCI2_IO_PHYS >> 12) & POBAR_BA_MASK; ++ pci_pot[4].pocmr = POCMR_EN | POCMR_PCI2 | POCMR_IO | POCMR_CM_16M; ++ ++ /* PCI2 mmio - non-prefetch mem space */ ++ pci_pot[5].potar = (CFG_PCI2_MMIO_BASE >> 12) & POTAR_TA_MASK; ++ pci_pot[5].pobar = (CFG_PCI2_MMIO_PHYS >> 12) & POBAR_BA_MASK; ++ pci_pot[5].pocmr = POCMR_EN | POCMR_PCI2 | POCMR_CM_256M; ++ ++ /* ++ * Configure PCI Inbound Translation Windows ++ */ ++ ++ /* we need RAM mapped to PCI space for the devices to ++ * access main memory */ ++ pci_ctrl[1].pitar1 = 0x0; ++ pci_ctrl[1].pibar1 = 0x0; ++ pci_ctrl[1].piebar1 = 0x0; ++ pci_ctrl[1].piwar1 = ++ PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP | PIWAR_WTT_SNOOP | ++ (__ilog2(gd->ram_size) - 1); ++ ++ hose->first_busno = pci_hose[0].last_busno + 1; ++ hose->last_busno = 0xff; ++ ++ /* PCI memory prefetch space */ ++ pci_set_region(hose->regions + 0, ++ CFG_PCI2_MEM_BASE, ++ CFG_PCI2_MEM_PHYS, ++ CFG_PCI2_MEM_SIZE, PCI_REGION_MEM | PCI_REGION_PREFETCH); ++ ++ /* PCI memory space */ ++ pci_set_region(hose->regions + 1, ++ CFG_PCI2_MMIO_BASE, ++ CFG_PCI2_MMIO_PHYS, CFG_PCI2_MMIO_SIZE, PCI_REGION_MEM); ++ ++ /* PCI IO space */ ++ pci_set_region(hose->regions + 2, ++ CFG_PCI2_IO_BASE, ++ CFG_PCI2_IO_PHYS, CFG_PCI2_IO_SIZE, PCI_REGION_IO); ++ ++ /* System memory space */ ++ pci_set_region(hose->regions + 3, ++ CONFIG_PCI_SYS_MEM_BUS, ++ CONFIG_PCI_SYS_MEM_PHYS, ++ gd->ram_size, PCI_REGION_MEM | PCI_REGION_MEMORY); ++ ++ hose->region_count = 4; ++ ++ pci_setup_indirect(hose, ++ (CFG_IMMR + 0x8380), (CFG_IMMR + 0x8384)); ++ ++ pci_register_hose(hose); ++ ++ /* ++ * Write to Command register ++ */ ++ reg16 = 0xff; ++ dev = PCI_BDF(hose->first_busno, 0, 0); ++ pci_hose_read_config_word(hose, dev, PCI_COMMAND, ®16); ++ reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; ++ pci_hose_write_config_word(hose, dev, PCI_COMMAND, reg16); ++ ++ /* ++ * Clear non-reserved bits in status register. ++ */ ++ pci_hose_write_config_word(hose, dev, PCI_STATUS, 0xffff); ++ pci_hose_write_config_byte(hose, dev, PCI_LATENCY_TIMER, 0x80); ++ pci_hose_write_config_byte(hose, dev, PCI_CACHE_LINE_SIZE, 0x08); ++ ++ /* ++ * Hose scan. ++ */ ++ hose->last_busno = pci_hose_scan(hose); ++#endif ++} ++ ++#endif /* CONFIG_PCI */ ++#ifdef CONFIG_OF_FLAT_TREE ++void ++ft_pci_setup(void *blob, bd_t *bd) ++{ ++ u32 *p; ++ int len; ++ ++ p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@8500/bus-range", &len); ++ if (p != NULL) { ++ p[0] = pci_hose[0].first_busno; ++ p[1] = pci_hose[0].last_busno; ++ } ++ ++#ifdef CONFIG_MPC83XX_PCI2 ++ p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@8600/bus-range", &len); ++ if (p != NULL) { ++ p[0] = pci_hose[1].first_busno; ++ p[1] = pci_hose[1].last_busno; ++ } ++#endif ++} ++#endif /* CONFIG_OF_FLAT_TREE */ +diff -Naupr u-boot-1.1.6/board/mpc8349itx/u-boot.lds u-boot-1.1.6-fsl-1/board/mpc8349itx/u-boot.lds +--- u-boot-1.1.6/board/mpc8349itx/u-boot.lds 1969-12-31 18:00:00.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/board/mpc8349itx/u-boot.lds 2006-11-10 11:24:28.000000000 -0600 +@@ -0,0 +1,120 @@ ++/* ++ * Copyright (C) Freescale Semiconductor, Inc. 2006. All rights reserved. ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++OUTPUT_ARCH(powerpc) ++SECTIONS ++{ ++ /* Read-only sections, merged into text segment: */ ++ . = + SIZEOF_HEADERS; ++ .interp : { *(.interp) } ++ .hash : { *(.hash) } ++ .dynsym : { *(.dynsym) } ++ .dynstr : { *(.dynstr) } ++ .rel.text : { *(.rel.text) } ++ .rela.text : { *(.rela.text) } ++ .rel.data : { *(.rel.data) } ++ .rela.data : { *(.rela.data) } ++ .rel.rodata : { *(.rel.rodata) } ++ .rela.rodata : { *(.rela.rodata) } ++ .rel.got : { *(.rel.got) } ++ .rela.got : { *(.rela.got) } ++ .rel.ctors : { *(.rel.ctors) } ++ .rela.ctors : { *(.rela.ctors) } ++ .rel.dtors : { *(.rel.dtors) } ++ .rela.dtors : { *(.rela.dtors) } ++ .rel.bss : { *(.rel.bss) } ++ .rela.bss : { *(.rela.bss) } ++ .rel.plt : { *(.rel.plt) } ++ .rela.plt : { *(.rela.plt) } ++ .init : { *(.init) } ++ .plt : { *(.plt) } ++ .text : ++ { ++ cpu/mpc83xx/start.o (.text) ++ *(.text) ++ *(.fixup) ++ *(.got1) ++ . = ALIGN(16); ++ *(.rodata) ++ *(.rodata1) ++ *(.rodata.str1.4) ++ } ++ .fini : { *(.fini) } =0 ++ .ctors : { *(.ctors) } ++ .dtors : { *(.dtors) } ++ ++ /* Read-write section, merged into data segment: */ ++ . = (. + 0x0FFF) & 0xFFFFF000; ++ _erotext = .; ++ PROVIDE (erotext = .); ++ .reloc : ++ { ++ *(.got) ++ _GOT2_TABLE_ = .; ++ *(.got2) ++ _FIXUP_TABLE_ = .; ++ *(.fixup) ++ } ++ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2; ++ __fixup_entries = (. - _FIXUP_TABLE_) >> 2; ++ ++ .data : ++ { ++ *(.data) ++ *(.data1) ++ *(.sdata) ++ *(.sdata2) ++ *(.dynamic) ++ CONSTRUCTORS ++ } ++ _edata = .; ++ PROVIDE (edata = .); ++ ++ . = .; ++ __u_boot_cmd_start = .; ++ .u_boot_cmd : { *(.u_boot_cmd) } ++ __u_boot_cmd_end = .; ++ ++ . = .; ++ __start___ex_table = .; ++ __ex_table : { *(__ex_table) } ++ __stop___ex_table = .; ++ ++ . = ALIGN(4096); ++ __init_begin = .; ++ .text.init : { *(.text.init) } ++ .data.init : { *(.data.init) } ++ . = ALIGN(4096); ++ __init_end = .; ++ ++ __bss_start = .; ++ .bss : ++ { ++ *(.sbss) *(.scommon) ++ *(.dynbss) ++ *(.bss) ++ *(COMMON) ++ } ++ _end = . ; ++ PROVIDE (end = .); ++} ++ENTRY(_start) +diff -Naupr u-boot-1.1.6/board/mpc8360emds/config.mk u-boot-1.1.6-fsl-1/board/mpc8360emds/config.mk +--- u-boot-1.1.6/board/mpc8360emds/config.mk 1969-12-31 18:00:00.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/board/mpc8360emds/config.mk 2006-11-10 11:24:28.000000000 -0600 +@@ -0,0 +1,28 @@ ++# ++# (C) Copyright 2006 ++# Wolfgang Denk, DENX Software Engineering, wd@denx.de. ++# ++# See file CREDITS for list of people who contributed to this ++# project. ++# ++# This program is free software; you can redistribute it and/or ++# modify it under the terms of the GNU General Public License as ++# published by the Free Software Foundation; either version 2 of ++# the License, or (at your option) any later version. ++# ++# This program is distributed in the hope that it will be useful, ++# but WITHOUT ANY WARRANTY; without even the implied warranty of ++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++# GNU General Public License for more details. ++# ++# You should have received a copy of the GNU General Public License ++# along with this program; if not, write to the Free Software ++# Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++# MA 02111-1307 USA ++# ++ ++# ++# MPC8360EMDS ++# ++ ++TEXT_BASE = 0xFE000000 +diff -Naupr u-boot-1.1.6/board/mpc8360emds/Makefile u-boot-1.1.6-fsl-1/board/mpc8360emds/Makefile +--- u-boot-1.1.6/board/mpc8360emds/Makefile 1969-12-31 18:00:00.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/board/mpc8360emds/Makefile 2006-11-10 11:24:28.000000000 -0600 +@@ -0,0 +1,50 @@ ++# ++# (C) Copyright 2006 ++# Wolfgang Denk, DENX Software Engineering, wd@denx.de. ++# ++# See file CREDITS for list of people who contributed to this ++# project. ++# ++# This program is free software; you can redistribute it and/or ++# modify it under the terms of the GNU General Public License as ++# published by the Free Software Foundation; either version 2 of ++# the License, or (at your option) any later version. ++# ++# This program is distributed in the hope that it will be useful, ++# but WITHOUT ANY WARRANTY; without even the implied warranty of ++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++# GNU General Public License for more details. ++# ++# You should have received a copy of the GNU General Public License ++# along with this program; if not, write to the Free Software ++# Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++# MA 02111-1307 USA ++# ++ ++include $(TOPDIR)/config.mk ++ ++LIB = $(obj)lib$(BOARD).a ++ ++COBJS := $(BOARD).o pci.o ++ ++SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) ++OBJS := $(addprefix $(obj),$(COBJS)) ++SOBJS := $(addprefix $(obj),$(SOBJS)) ++ ++$(LIB): $(obj).depend $(OBJS) ++ $(AR) $(ARFLAGS) $@ $(OBJS) ++ ++clean: ++ rm -f $(SOBJS) $(OBJS) ++ ++distclean: clean ++ rm -f $(LIB) core *.bak .depend ++ ++######################################################################### ++ ++# defines $(obj).depend target ++include $(SRCTREE)/rules.mk ++ ++sinclude $(obj).depend ++ ++######################################################################### +diff -Naupr u-boot-1.1.6/board/mpc8360emds/mpc8360emds.c u-boot-1.1.6-fsl-1/board/mpc8360emds/mpc8360emds.c +--- u-boot-1.1.6/board/mpc8360emds/mpc8360emds.c 1969-12-31 18:00:00.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/board/mpc8360emds/mpc8360emds.c 2006-11-10 11:24:28.000000000 -0600 +@@ -0,0 +1,657 @@ ++/* ++ * Copyright (C) 2006 Freescale Semiconductor, Inc. ++ * ++ * Dave Liu <daveliu@freescale.com> ++ * based on board/mpc8349emds/mpc8349emds.c ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ */ ++ ++#include <common.h> ++#include <ioports.h> ++#include <mpc83xx.h> ++#include <i2c.h> ++#include <spd.h> ++#include <miiphy.h> ++#include <command.h> ++#if defined(CONFIG_PCI) ++#include <pci.h> ++#endif ++#if defined(CONFIG_SPD_EEPROM) ++#include <spd_sdram.h> ++#else ++#include <asm/mmu.h> ++#endif ++#if defined(CONFIG_OF_FLAT_TREE) ++#include <ft_build.h> ++#endif ++ ++const qe_iop_conf_t qe_iop_conf_tab[] = { ++ /* GETH1 */ ++ {0, 3, 1, 0, 1}, /* TxD0 */ ++ {0, 4, 1, 0, 1}, /* TxD1 */ ++ {0, 5, 1, 0, 1}, /* TxD2 */ ++ {0, 6, 1, 0, 1}, /* TxD3 */ ++ {1, 6, 1, 0, 3}, /* TxD4 */ ++ {1, 7, 1, 0, 1}, /* TxD5 */ ++ {1, 9, 1, 0, 2}, /* TxD6 */ ++ {1, 10, 1, 0, 2}, /* TxD7 */ ++ {0, 9, 2, 0, 1}, /* RxD0 */ ++ {0, 10, 2, 0, 1}, /* RxD1 */ ++ {0, 11, 2, 0, 1}, /* RxD2 */ ++ {0, 12, 2, 0, 1}, /* RxD3 */ ++ {0, 13, 2, 0, 1}, /* RxD4 */ ++ {1, 1, 2, 0, 2}, /* RxD5 */ ++ {1, 0, 2, 0, 2}, /* RxD6 */ ++ {1, 4, 2, 0, 2}, /* RxD7 */ ++ {0, 7, 1, 0, 1}, /* TX_EN */ ++ {0, 8, 1, 0, 1}, /* TX_ER */ ++ {0, 15, 2, 0, 1}, /* RX_DV */ ++ {0, 16, 2, 0, 1}, /* RX_ER */ ++ {0, 0, 2, 0, 1}, /* RX_CLK */ ++ {2, 9, 1, 0, 3}, /* GTX_CLK - CLK10 */ ++ {2, 8, 2, 0, 1}, /* GTX125 - CLK9 */ ++ /* GETH2 */ ++ {0, 17, 1, 0, 1}, /* TxD0 */ ++ {0, 18, 1, 0, 1}, /* TxD1 */ ++ {0, 19, 1, 0, 1}, /* TxD2 */ ++ {0, 20, 1, 0, 1}, /* TxD3 */ ++ {1, 2, 1, 0, 1}, /* TxD4 */ ++ {1, 3, 1, 0, 2}, /* TxD5 */ ++ {1, 5, 1, 0, 3}, /* TxD6 */ ++ {1, 8, 1, 0, 3}, /* TxD7 */ ++ {0, 23, 2, 0, 1}, /* RxD0 */ ++ {0, 24, 2, 0, 1}, /* RxD1 */ ++ {0, 25, 2, 0, 1}, /* RxD2 */ ++ {0, 26, 2, 0, 1}, /* RxD3 */ ++ {0, 27, 2, 0, 1}, /* RxD4 */ ++ {1, 12, 2, 0, 2}, /* RxD5 */ ++ {1, 13, 2, 0, 3}, /* RxD6 */ ++ {1, 11, 2, 0, 2}, /* RxD7 */ ++ {0, 21, 1, 0, 1}, /* TX_EN */ ++ {0, 22, 1, 0, 1}, /* TX_ER */ ++ {0, 29, 2, 0, 1}, /* RX_DV */ ++ {0, 30, 2, 0, 1}, /* RX_ER */ ++ {0, 31, 2, 0, 1}, /* RX_CLK */ ++ {2, 2, 1, 0, 2}, /* GTX_CLK = CLK10 */ ++ {2, 3, 2, 0, 1}, /* GTX125 - CLK4 */ ++ ++ {0, 1, 3, 0, 2}, /* MDIO */ ++ {0, 2, 1, 0, 1}, /* MDC */ ++ ++ {0, 0, 0, 0, QE_IOP_TAB_END}, /* END of table */ ++}; ++ ++int board_early_init_f(void) ++{ ++ volatile u8 *bcsr = (volatile u8 *)CFG_BCSR; ++ ++ /* Enable flash write */ ++ bcsr[0xa] &= ~0x04; ++ ++ return 0; ++} ++ ++#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRC) ++extern void ddr_enable_ecc(unsigned int dram_size); ++#endif ++int fixed_sdram(void); ++void sdram_init(void); ++ ++long int initdram(int board_type) ++{ ++ volatile immap_t *im = (immap_t *) CFG_IMMR; ++ u32 msize = 0; ++ ++ if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32) im) ++ return -1; ++ ++ /* DDR SDRAM - Main SODIMM */ ++ im->sysconf.ddrlaw[0].bar = CFG_DDR_BASE & LAWBAR_BAR; ++#if defined(CONFIG_SPD_EEPROM) ++ msize = spd_sdram(); ++#else ++ msize = fixed_sdram(); ++#endif ++ ++#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRC) ++ /* ++ * Initialize DDR ECC byte ++ */ ++ ddr_enable_ecc(msize * 1024 * 1024); ++#endif ++ /* ++ * Initialize SDRAM if it is on local bus. ++ */ ++ sdram_init(); ++ puts(" DDR RAM: "); ++ /* return total bus SDRAM size(bytes) -- DDR */ ++ return (msize * 1024 * 1024); ++} ++ ++#if !defined(CONFIG_SPD_EEPROM) ++/************************************************************************* ++ * fixed sdram init -- doesn't use serial presence detect. ++ ************************************************************************/ ++int fixed_sdram(void) ++{ ++ volatile immap_t *im = (immap_t *) CFG_IMMR; ++ u32 msize = 0; ++ u32 ddr_size; ++ u32 ddr_size_log2; ++ ++ msize = CFG_DDR_SIZE; ++ for (ddr_size = msize << 20, ddr_size_log2 = 0; ++ (ddr_size > 1); ddr_size = ddr_size >> 1, ddr_size_log2++) { ++ if (ddr_size & 1) { ++ return -1; ++ } ++ } ++ im->sysconf.ddrlaw[0].ar = ++ LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE); ++#if (CFG_DDR_SIZE != 256) ++#warning Currenly any ddr size other than 256 is not supported ++#endif ++ im->ddr.csbnds[0].csbnds = 0x00000007; ++ im->ddr.csbnds[1].csbnds = 0x0008000f; ++ ++ im->ddr.cs_config[0] = CFG_DDR_CONFIG; ++ im->ddr.cs_config[1] = CFG_DDR_CONFIG; ++ ++ im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1; ++ im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2; ++ im->ddr.sdram_cfg = CFG_DDR_CONTROL; ++ ++ im->ddr.sdram_mode = CFG_DDR_MODE; ++ im->ddr.sdram_interval = CFG_DDR_INTERVAL; ++ udelay(200); ++ im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN; ++ ++ return msize; ++} ++#endif /*!CFG_SPD_EEPROM */ ++ ++int checkboard(void) ++{ ++ puts("Board: Freescale MPC8360EMDS\n"); ++ return 0; ++} ++ ++/* ++ * if MPC8360EMDS is soldered with SDRAM ++ */ ++#if defined(CFG_BR2_PRELIM) \ ++ && defined(CFG_OR2_PRELIM) \ ++ && defined(CFG_LBLAWBAR2_PRELIM) \ ++ && defined(CFG_LBLAWAR2_PRELIM) ++/* ++ * Initialize SDRAM memory on the Local Bus. ++ */ ++ ++void sdram_init(void) ++{ ++ volatile immap_t *immap = (immap_t *) CFG_IMMR; ++ volatile lbus83xx_t *lbc = &immap->lbus; ++ uint *sdram_addr = (uint *) CFG_LBC_SDRAM_BASE; ++ ++ puts("\n SDRAM on Local Bus: "); ++ print_size(CFG_LBC_SDRAM_SIZE * 1024 * 1024, "\n"); ++ /* ++ * Setup SDRAM Base and Option Registers, already done in cpu_init.c ++ */ ++ /*setup mtrpt, lsrt and lbcr for LB bus */ ++ lbc->lbcr = CFG_LBC_LBCR; ++ lbc->mrtpr = CFG_LBC_MRTPR; ++ lbc->lsrt = CFG_LBC_LSRT; ++ asm("sync"); ++ ++ /* ++ * Configure the SDRAM controller Machine Mode Register. ++ */ ++ lbc->lsdmr = CFG_LBC_LSDMR_5; /* Normal Operation */ ++ lbc->lsdmr = CFG_LBC_LSDMR_1; /* Precharge All Banks */ ++ asm("sync"); ++ *sdram_addr = 0xff; ++ udelay(100); ++ ++ /* ++ * We need do 8 times auto refresh operation. ++ */ ++ lbc->lsdmr = CFG_LBC_LSDMR_2; ++ asm("sync"); ++ *sdram_addr = 0xff; /* 1 times */ ++ udelay(100); ++ *sdram_addr = 0xff; /* 2 times */ ++ udelay(100); ++ *sdram_addr = 0xff; /* 3 times */ ++ udelay(100); ++ *sdram_addr = 0xff; /* 4 times */ ++ udelay(100); ++ *sdram_addr = 0xff; /* 5 times */ ++ udelay(100); ++ *sdram_addr = 0xff; /* 6 times */ ++ udelay(100); ++ *sdram_addr = 0xff; /* 7 times */ ++ udelay(100); ++ *sdram_addr = 0xff; /* 8 times */ ++ udelay(100); ++ ++ /* Mode register write operation */ ++ lbc->lsdmr = CFG_LBC_LSDMR_4; ++ asm("sync"); ++ *(sdram_addr + 0xcc) = 0xff; ++ udelay(100); ++ ++ /* Normal operation */ ++ lbc->lsdmr = CFG_LBC_LSDMR_5 | 0x40000000; ++ asm("sync"); ++ *sdram_addr = 0xff; ++ udelay(100); ++} ++#else ++void sdram_init(void) ++{ ++ puts("SDRAM on Local Bus is NOT available!\n"); ++} ++#endif ++ ++#if defined(CONFIG_DDR_ECC) && defined(CONFIG_DDR_ECC_CMD) ++/* ++ * ECC user commands ++ */ ++void ecc_print_status(void) ++{ ++ volatile immap_t *immap = (immap_t *) CFG_IMMR; ++ volatile ddr83xx_t *ddr = &immap->ddr; ++ ++ printf("\nECC mode: %s\n\n", ++ (ddr->sdram_cfg & SDRAM_CFG_ECC_EN) ? "ON" : "OFF"); ++ ++ /* Interrupts */ ++ printf("Memory Error Interrupt Enable:\n"); ++ printf(" Multiple-Bit Error Interrupt Enable: %d\n", ++ (ddr->err_int_en & ECC_ERR_INT_EN_MBEE) ? 1 : 0); ++ printf(" Single-Bit Error Interrupt Enable: %d\n", ++ (ddr->err_int_en & ECC_ERR_INT_EN_SBEE) ? 1 : 0); ++ printf(" Memory Select Error Interrupt Enable: %d\n\n", ++ (ddr->err_int_en & ECC_ERR_INT_EN_MSEE) ? 1 : 0); ++ ++ /* Error disable */ ++ printf("Memory Error Disable:\n"); ++ printf(" Multiple-Bit Error Disable: %d\n", ++ (ddr->err_disable & ECC_ERROR_DISABLE_MBED) ? 1 : 0); ++ printf(" Sinle-Bit Error Disable: %d\n", ++ (ddr->err_disable & ECC_ERROR_DISABLE_SBED) ? 1 : 0); ++ printf(" Memory Select Error Disable: %d\n\n", ++ (ddr->err_disable & ECC_ERROR_DISABLE_MSED) ? 1 : 0); ++ ++ /* Error injection */ ++ printf("Memory Data Path Error Injection Mask High/Low: %08lx %08lx\n", ++ ddr->data_err_inject_hi, ddr->data_err_inject_lo); ++ ++ printf("Memory Data Path Error Injection Mask ECC:\n"); ++ printf(" ECC Mirror Byte: %d\n", ++ (ddr->ecc_err_inject & ECC_ERR_INJECT_EMB) ? 1 : 0); ++ printf(" ECC Injection Enable: %d\n", ++ (ddr->ecc_err_inject & ECC_ERR_INJECT_EIEN) ? 1 : 0); ++ printf(" ECC Error Injection Mask: 0x%02x\n\n", ++ ddr->ecc_err_inject & ECC_ERR_INJECT_EEIM); ++ ++ /* SBE counter/threshold */ ++ printf("Memory Single-Bit Error Management (0..255):\n"); ++ printf(" Single-Bit Error Threshold: %d\n", ++ (ddr->err_sbe & ECC_ERROR_MAN_SBET) >> ECC_ERROR_MAN_SBET_SHIFT); ++ printf(" Single-Bit Error Counter: %d\n\n", ++ (ddr->err_sbe & ECC_ERROR_MAN_SBEC) >> ECC_ERROR_MAN_SBEC_SHIFT); ++ ++ /* Error detect */ ++ printf("Memory Error Detect:\n"); ++ printf(" Multiple Memory Errors: %d\n", ++ (ddr->err_detect & ECC_ERROR_DETECT_MME) ? 1 : 0); ++ printf(" Multiple-Bit Error: %d\n", ++ (ddr->err_detect & ECC_ERROR_DETECT_MBE) ? 1 : 0); ++ printf(" Single-Bit Error: %d\n", ++ (ddr->err_detect & ECC_ERROR_DETECT_SBE) ? 1 : 0); ++ printf(" Memory Select Error: %d\n\n", ++ (ddr->err_detect & ECC_ERROR_DETECT_MSE) ? 1 : 0); ++ ++ /* Capture data */ ++ printf("Memory Error Address Capture: 0x%08lx\n", ddr->capture_address); ++ printf("Memory Data Path Read Capture High/Low: %08lx %08lx\n", ++ ddr->capture_data_hi, ddr->capture_data_lo); ++ printf("Memory Data Path Read Capture ECC: 0x%02x\n\n", ++ ddr->capture_ecc & CAPTURE_ECC_ECE); ++ ++ printf("Memory Error Attributes Capture:\n"); ++ printf(" Data Beat Number: %d\n", ++ (ddr->capture_attributes & ECC_CAPT_ATTR_BNUM) >> ++ ECC_CAPT_ATTR_BNUM_SHIFT); ++ printf(" Transaction Size: %d\n", ++ (ddr->capture_attributes & ECC_CAPT_ATTR_TSIZ) >> ++ ECC_CAPT_ATTR_TSIZ_SHIFT); ++ printf(" Transaction Source: %d\n", ++ (ddr->capture_attributes & ECC_CAPT_ATTR_TSRC) >> ++ ECC_CAPT_ATTR_TSRC_SHIFT); ++ printf(" Transaction Type: %d\n", ++ (ddr->capture_attributes & ECC_CAPT_ATTR_TTYP) >> ++ ECC_CAPT_ATTR_TTYP_SHIFT); ++ printf(" Error Information Valid: %d\n\n", ++ ddr->capture_attributes & ECC_CAPT_ATTR_VLD); ++} ++ ++int do_ecc(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) ++{ ++ volatile immap_t *immap = (immap_t *) CFG_IMMR; ++ volatile ddr83xx_t *ddr = &immap->ddr; ++ volatile u32 val; ++ u64 *addr; ++ u32 count; ++ register u64 *i; ++ u32 ret[2]; ++ u32 pattern[2]; ++ u32 writeback[2]; ++ ++ /* The pattern is written into memory to generate error */ ++ pattern[0] = 0xfedcba98UL; ++ pattern[1] = 0x76543210UL; ++ ++ /* After injecting error, re-initialize the memory with the value */ ++ writeback[0] = 0x01234567UL; ++ writeback[1] = 0x89abcdefUL; ++ ++ if (argc > 4) { ++ printf("Usage:\n%s\n", cmdtp->usage); ++ return 1; ++ } ++ ++ if (argc == 2) { ++ if (strcmp(argv[1], "status") == 0) { ++ ecc_print_status(); ++ return 0; ++ } else if (strcmp(argv[1], "captureclear") == 0) { ++ ddr->capture_address = 0; ++ ddr->capture_data_hi = 0; ++ ddr->capture_data_lo = 0; ++ ddr->capture_ecc = 0; ++ ddr->capture_attributes = 0; ++ return 0; ++ } ++ } ++ if (argc == 3) { ++ if (strcmp(argv[1], "sbecnt") == 0) { ++ val = simple_strtoul(argv[2], NULL, 10); ++ if (val > 255) { ++ printf("Incorrect Counter value, " ++ "should be 0..255\n"); ++ return 1; ++ } ++ ++ val = (val << ECC_ERROR_MAN_SBEC_SHIFT); ++ val |= (ddr->err_sbe & ECC_ERROR_MAN_SBET); ++ ++ ddr->err_sbe = val; ++ return 0; ++ } else if (strcmp(argv[1], "sbethr") == 0) { ++ val = simple_strtoul(argv[2], NULL, 10); ++ if (val > 255) { ++ printf("Incorrect Counter value, " ++ "should be 0..255\n"); ++ return 1; ++ } ++ ++ val = (val << ECC_ERROR_MAN_SBET_SHIFT); ++ val |= (ddr->err_sbe & ECC_ERROR_MAN_SBEC); ++ ++ ddr->err_sbe = val; ++ return 0; ++ } else if (strcmp(argv[1], "errdisable") == 0) { ++ val = ddr->err_disable; ++ ++ if (strcmp(argv[2], "+sbe") == 0) { ++ val |= ECC_ERROR_DISABLE_SBED; ++ } else if (strcmp(argv[2], "+mbe") == 0) { ++ val |= ECC_ERROR_DISABLE_MBED; ++ } else if (strcmp(argv[2], "+mse") == 0) { ++ val |= ECC_ERROR_DISABLE_MSED; ++ } else if (strcmp(argv[2], "+all") == 0) { ++ val |= (ECC_ERROR_DISABLE_SBED | ++ ECC_ERROR_DISABLE_MBED | ++ ECC_ERROR_DISABLE_MSED); ++ } else if (strcmp(argv[2], "-sbe") == 0) { ++ val &= ~ECC_ERROR_DISABLE_SBED; ++ } else if (strcmp(argv[2], "-mbe") == 0) { ++ val &= ~ECC_ERROR_DISABLE_MBED; ++ } else if (strcmp(argv[2], "-mse") == 0) { ++ val &= ~ECC_ERROR_DISABLE_MSED; ++ } else if (strcmp(argv[2], "-all") == 0) { ++ val &= ~(ECC_ERROR_DISABLE_SBED | ++ ECC_ERROR_DISABLE_MBED | ++ ECC_ERROR_DISABLE_MSED); ++ } else { ++ printf("Incorrect err_disable field\n"); ++ return 1; ++ } ++ ++ ddr->err_disable = val; ++ __asm__ __volatile__("sync"); ++ __asm__ __volatile__("isync"); ++ return 0; ++ } else if (strcmp(argv[1], "errdetectclr") == 0) { ++ val = ddr->err_detect; ++ ++ if (strcmp(argv[2], "mme") == 0) { ++ val |= ECC_ERROR_DETECT_MME; ++ } else if (strcmp(argv[2], "sbe") == 0) { ++ val |= ECC_ERROR_DETECT_SBE; ++ } else if (strcmp(argv[2], "mbe") == 0) { ++ val |= ECC_ERROR_DETECT_MBE; ++ } else if (strcmp(argv[2], "mse") == 0) { ++ val |= ECC_ERROR_DETECT_MSE; ++ } else if (strcmp(argv[2], "all") == 0) { ++ val |= (ECC_ERROR_DETECT_MME | ++ ECC_ERROR_DETECT_MBE | ++ ECC_ERROR_DETECT_SBE | ++ ECC_ERROR_DETECT_MSE); ++ } else { ++ printf("Incorrect err_detect field\n"); ++ return 1; ++ } ++ ++ ddr->err_detect = val; ++ return 0; ++ } else if (strcmp(argv[1], "injectdatahi") == 0) { ++ val = simple_strtoul(argv[2], NULL, 16); ++ ++ ddr->data_err_inject_hi = val; ++ return 0; ++ } else if (strcmp(argv[1], "injectdatalo") == 0) { ++ val = simple_strtoul(argv[2], NULL, 16); ++ ++ ddr->data_err_inject_lo = val; ++ return 0; ++ } else if (strcmp(argv[1], "injectecc") == 0) { ++ val = simple_strtoul(argv[2], NULL, 16); ++ if (val > 0xff) { ++ printf("Incorrect ECC inject mask, " ++ "should be 0x00..0xff\n"); ++ return 1; ++ } ++ val |= (ddr->ecc_err_inject & ~ECC_ERR_INJECT_EEIM); ++ ++ ddr->ecc_err_inject = val; ++ return 0; ++ } else if (strcmp(argv[1], "inject") == 0) { ++ val = ddr->ecc_err_inject; ++ ++ if (strcmp(argv[2], "en") == 0) ++ val |= ECC_ERR_INJECT_EIEN; ++ else if (strcmp(argv[2], "dis") == 0) ++ val &= ~ECC_ERR_INJECT_EIEN; ++ else ++ printf("Incorrect command\n"); ++ ++ ddr->ecc_err_inject = val; ++ __asm__ __volatile__("sync"); ++ __asm__ __volatile__("isync"); ++ return 0; ++ } else if (strcmp(argv[1], "mirror") == 0) { ++ val = ddr->ecc_err_inject; ++ ++ if (strcmp(argv[2], "en") == 0) ++ val |= ECC_ERR_INJECT_EMB; ++ else if (strcmp(argv[2], "dis") == 0) ++ val &= ~ECC_ERR_INJECT_EMB; ++ else ++ printf("Incorrect command\n"); ++ ++ ddr->ecc_err_inject = val; ++ return 0; ++ } ++ } ++ if (argc == 4) { ++ if (strcmp(argv[1], "testdw") == 0) { ++ addr = (u64 *) simple_strtoul(argv[2], NULL, 16); ++ count = simple_strtoul(argv[3], NULL, 16); ++ ++ if ((u32) addr % 8) { ++ printf("Address not alligned on " ++ "double word boundary\n"); ++ return 1; ++ } ++ disable_interrupts(); ++ ++ for (i = addr; i < addr + count; i++) { ++ ++ /* enable injects */ ++ ddr->ecc_err_inject |= ECC_ERR_INJECT_EIEN; ++ __asm__ __volatile__("sync"); ++ __asm__ __volatile__("isync"); ++ ++ /* write memory location injecting errors */ ++ ppcDWstore((u32 *) i, pattern); ++ __asm__ __volatile__("sync"); ++ ++ /* disable injects */ ++ ddr->ecc_err_inject &= ~ECC_ERR_INJECT_EIEN; ++ __asm__ __volatile__("sync"); ++ __asm__ __volatile__("isync"); ++ ++ /* read data, this generates ECC error */ ++ ppcDWload((u32 *) i, ret); ++ __asm__ __volatile__("sync"); ++ ++ /* re-initialize memory, double word write the location again, ++ * generates new ECC code this time */ ++ ppcDWstore((u32 *) i, writeback); ++ __asm__ __volatile__("sync"); ++ } ++ enable_interrupts(); ++ return 0; ++ } ++ if (strcmp(argv[1], "testword") == 0) { ++ addr = (u64 *) simple_strtoul(argv[2], NULL, 16); ++ count = simple_strtoul(argv[3], NULL, 16); ++ ++ if ((u32) addr % 8) { ++ printf("Address not alligned on " ++ "double word boundary\n"); ++ return 1; ++ } ++ disable_interrupts(); ++ ++ for (i = addr; i < addr + count; i++) { ++ ++ /* enable injects */ ++ ddr->ecc_err_inject |= ECC_ERR_INJECT_EIEN; ++ __asm__ __volatile__("sync"); ++ __asm__ __volatile__("isync"); ++ ++ /* write memory location injecting errors */ ++ *(u32 *) i = 0xfedcba98UL; ++ __asm__ __volatile__("sync"); ++ ++ /* sub double word write, ++ * bus will read-modify-write, ++ * generates ECC error */ ++ *((u32 *) i + 1) = 0x76543210UL; ++ __asm__ __volatile__("sync"); ++ ++ /* disable injects */ ++ ddr->ecc_err_inject &= ~ECC_ERR_INJECT_EIEN; ++ __asm__ __volatile__("sync"); ++ __asm__ __volatile__("isync"); ++ ++ /* re-initialize memory, ++ * double word write the location again, ++ * generates new ECC code this time */ ++ ppcDWstore((u32 *) i, writeback); ++ __asm__ __volatile__("sync"); ++ } ++ enable_interrupts(); ++ return 0; ++ } ++ } ++ printf("Usage:\n%s\n", cmdtp->usage); ++ return 1; ++} ++ ++U_BOOT_CMD(ecc, 4, 0, do_ecc, ++ "ecc - support for DDR ECC features\n", ++ "status - print out status info\n" ++ "ecc captureclear - clear capture regs data\n" ++ "ecc sbecnt <val> - set Single-Bit Error counter\n" ++ "ecc sbethr <val> - set Single-Bit Threshold\n" ++ "ecc errdisable <flag> - clear/set disable Memory Error Disable, flag:\n" ++ " [-|+]sbe - Single-Bit Error\n" ++ " [-|+]mbe - Multiple-Bit Error\n" ++ " [-|+]mse - Memory Select Error\n" ++ " [-|+]all - all errors\n" ++ "ecc errdetectclr <flag> - clear Memory Error Detect, flag:\n" ++ " mme - Multiple Memory Errors\n" ++ " sbe - Single-Bit Error\n" ++ " mbe - Multiple-Bit Error\n" ++ " mse - Memory Select Error\n" ++ " all - all errors\n" ++ "ecc injectdatahi <hi> - set Memory Data Path Error Injection Mask High\n" ++ "ecc injectdatalo <lo> - set Memory Data Path Error Injection Mask Low\n" ++ "ecc injectecc <ecc> - set ECC Error Injection Mask\n" ++ "ecc inject <en|dis> - enable/disable error injection\n" ++ "ecc mirror <en|dis> - enable/disable mirror byte\n" ++ "ecc testdw <addr> <cnt> - test mem region with double word access:\n" ++ " - enables injects\n" ++ " - writes pattern injecting errors with double word access\n" ++ " - disables injects\n" ++ " - reads pattern back with double word access, generates error\n" ++ " - re-inits memory\n" ++ "ecc testword <addr> <cnt> - test mem region with word access:\n" ++ " - enables injects\n" ++ " - writes pattern injecting errors with word access\n" ++ " - writes pattern with word access, generates error\n" ++ " - disables injects\n" " - re-inits memory"); ++#endif /* if defined(CONFIG_DDR_ECC) && defined(CONFIG_DDR_ECC_CMD) */ ++ ++#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP) ++void ++ft_board_setup(void *blob, bd_t *bd) ++{ ++ u32 *p; ++ int len; ++ ++#ifdef CONFIG_PCI ++ ft_pci_setup(blob, bd); ++#endif ++ ft_cpu_setup(blob, bd); ++ ++ p = ft_get_prop(blob, "/memory/reg", &len); ++ if (p != NULL) { ++ *p++ = cpu_to_be32(bd->bi_memstart); ++ *p = cpu_to_be32(bd->bi_memsize); ++ } ++} ++#endif +diff -Naupr u-boot-1.1.6/board/mpc8360emds/pci.c u-boot-1.1.6-fsl-1/board/mpc8360emds/pci.c +--- u-boot-1.1.6/board/mpc8360emds/pci.c 1969-12-31 18:00:00.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/board/mpc8360emds/pci.c 2006-11-10 11:24:28.000000000 -0600 +@@ -0,0 +1,313 @@ ++/* ++ * Copyright (C) 2006 Freescale Semiconductor, Inc. ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ */ ++ ++/* ++ * PCI Configuration space access support for MPC83xx PCI Bridge ++ */ ++#include <asm/mmu.h> ++#include <asm/io.h> ++#include <common.h> ++#include <pci.h> ++#include <i2c.h> ++ ++#include <asm/fsl_i2c.h> ++ ++DECLARE_GLOBAL_DATA_PTR; ++ ++#if defined(CONFIG_PCI) ++#define PCI_FUNCTION_CONFIG 0x44 ++#define PCI_FUNCTION_CFG_LOCK 0x20 ++ ++/* ++ * Initialize PCI Devices, report devices found ++ */ ++#ifndef CONFIG_PCI_PNP ++static struct pci_config_table pci_mpc83xxemds_config_table[] = { ++ { ++ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, ++ pci_cfgfunc_config_device, ++ {PCI_ENET0_IOADDR, ++ PCI_ENET0_MEMADDR, ++ PCI_COMMON_MEMORY | PCI_COMMAND_MASTER} ++ }, ++ {} ++} ++#endif ++static struct pci_controller hose[] = { ++ { ++#ifndef CONFIG_PCI_PNP ++ config_table:pci_mpc83xxemds_config_table, ++#endif ++ }, ++}; ++ ++/********************************************************************** ++ * pci_init_board() ++ *********************************************************************/ ++void pci_init_board(void) ++#ifdef CONFIG_PCISLAVE ++{ ++ u16 reg16; ++ volatile immap_t *immr; ++ volatile law83xx_t *pci_law; ++ volatile pot83xx_t *pci_pot; ++ volatile pcictrl83xx_t *pci_ctrl; ++ volatile pciconf83xx_t *pci_conf; ++ ++ immr = (immap_t *) CFG_IMMR; ++ pci_law = immr->sysconf.pcilaw; ++ pci_pot = immr->ios.pot; ++ pci_ctrl = immr->pci_ctrl; ++ pci_conf = immr->pci_conf; ++ /* ++ * Configure PCI Inbound Translation Windows ++ */ ++ pci_ctrl[0].pitar0 = 0x0; ++ pci_ctrl[0].pibar0 = 0x0; ++ pci_ctrl[0].piwar0 = PIWAR_EN | PIWAR_RTT_SNOOP | ++ PIWAR_WTT_SNOOP | PIWAR_IWS_4K; ++ ++ pci_ctrl[0].pitar1 = 0x0; ++ pci_ctrl[0].pibar1 = 0x0; ++ pci_ctrl[0].piebar1 = 0x0; ++ pci_ctrl[0].piwar1 &= ~PIWAR_EN; ++ ++ pci_ctrl[0].pitar2 = 0x0; ++ pci_ctrl[0].pibar2 = 0x0; ++ pci_ctrl[0].piebar2 = 0x0; ++ pci_ctrl[0].piwar2 &= ~PIWAR_EN; ++ ++ hose[0].first_busno = 0; ++ hose[0].last_busno = 0xff; ++ pci_setup_indirect(&hose[0], ++ (CFG_IMMR + 0x8300), (CFG_IMMR + 0x8304)); ++ reg16 = 0xff; ++ ++ pci_hose_read_config_word(&hose[0], PCI_BDF(0, 0, 0), ++ PCI_COMMAND, ®16); ++ reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MEMORY; ++ pci_hose_write_config_word(&hose[0], PCI_BDF(0, 0, 0), ++ PCI_COMMAND, reg16); ++ ++ /* ++ * Clear non-reserved bits in status register. ++ */ ++ pci_hose_write_config_word(&hose[0], PCI_BDF(0, 0, 0), ++ PCI_STATUS, 0xffff); ++ pci_hose_write_config_byte(&hose[0], PCI_BDF(0, 0, 0), ++ PCI_LATENCY_TIMER, 0x80); ++ ++ /* ++ * Unlock configuration lock in PCI function configuration register. ++ */ ++ pci_hose_read_config_word(&hose[0], PCI_BDF(0, 0, 0), ++ PCI_FUNCTION_CONFIG, ®16); ++ reg16 &= ~(PCI_FUNCTION_CFG_LOCK); ++ pci_hose_write_config_word(&hose[0], PCI_BDF(0, 0, 0), ++ PCI_FUNCTION_CONFIG, reg16); ++ ++ printf("Enabled PCI 32bit Agent Mode\n"); ++} ++#else ++{ ++ volatile immap_t *immr; ++ volatile clk83xx_t *clk; ++ volatile law83xx_t *pci_law; ++ volatile pot83xx_t *pci_pot; ++ volatile pcictrl83xx_t *pci_ctrl; ++ volatile pciconf83xx_t *pci_conf; ++ ++ u8 val8, orig_i2c_bus; ++ u16 reg16; ++ u32 val32; ++ u32 dev; ++ ++ immr = (immap_t *) CFG_IMMR; ++ clk = (clk83xx_t *) & immr->clk; ++ pci_law = immr->sysconf.pcilaw; ++ pci_pot = immr->ios.pot; ++ pci_ctrl = immr->pci_ctrl; ++ pci_conf = immr->pci_conf; ++ /* ++ * Configure PCI controller and PCI_CLK_OUTPUT both in 66M mode ++ */ ++ val32 = clk->occr; ++ udelay(2000); ++#if defined(PCI_66M) ++ clk->occr = OCCR_PCICOE0 | OCCR_PCICOE1 | OCCR_PCICOE2; ++ printf("PCI clock is 66MHz\n"); ++#elif defined(PCI_33M) ++ clk->occr = OCCR_PCICOE0 | OCCR_PCICOE1 | OCCR_PCICOE2 | ++ OCCR_PCICD0 | OCCR_PCICD1 | OCCR_PCICD2 | OCCR_PCICR; ++ printf("PCI clock is 33MHz\n"); ++#else ++ clk->occr = OCCR_PCICOE0 | OCCR_PCICOE1 | OCCR_PCICOE2; ++ printf("PCI clock is 66MHz\n"); ++#endif ++ udelay(2000); ++ ++ /* ++ * Configure PCI Local Access Windows ++ */ ++ pci_law[0].bar = CFG_PCI_MEM_PHYS & LAWBAR_BAR; ++ pci_law[0].ar = LAWAR_EN | LAWAR_SIZE_512M; ++ ++ pci_law[1].bar = CFG_PCI_IO_PHYS & LAWBAR_BAR; ++ pci_law[1].ar = LAWAR_EN | LAWAR_SIZE_1M; ++ ++ /* ++ * Configure PCI Outbound Translation Windows ++ */ ++ ++ /* PCI mem space - prefetch */ ++ pci_pot[0].potar = (CFG_PCI_MEM_BASE >> 12) & POTAR_TA_MASK; ++ pci_pot[0].pobar = (CFG_PCI_MEM_PHYS >> 12) & POBAR_BA_MASK; ++ pci_pot[0].pocmr = ++ POCMR_EN | POCMR_SE | (POCMR_CM_256M & POCMR_CM_MASK); ++ ++ /* PCI mmio - non-prefetch mem space */ ++ pci_pot[1].potar = (CFG_PCI_MMIO_BASE >> 12) & POTAR_TA_MASK; ++ pci_pot[1].pobar = (CFG_PCI_MMIO_PHYS >> 12) & POBAR_BA_MASK; ++ pci_pot[1].pocmr = POCMR_EN | (POCMR_CM_256M & POCMR_CM_MASK); ++ ++ /* PCI IO space */ ++ pci_pot[2].potar = (CFG_PCI_IO_BASE >> 12) & POTAR_TA_MASK; ++ pci_pot[2].pobar = (CFG_PCI_IO_PHYS >> 12) & POBAR_BA_MASK; ++ pci_pot[2].pocmr = POCMR_EN | POCMR_IO | (POCMR_CM_1M & POCMR_CM_MASK); ++ ++ /* ++ * Configure PCI Inbound Translation Windows ++ */ ++ pci_ctrl[0].pitar1 = (CFG_PCI_SLV_MEM_LOCAL >> 12) & PITAR_TA_MASK; ++ pci_ctrl[0].pibar1 = (CFG_PCI_SLV_MEM_BUS >> 12) & PIBAR_MASK; ++ pci_ctrl[0].piebar1 = 0x0; ++ pci_ctrl[0].piwar1 = ++ PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP | PIWAR_WTT_SNOOP | ++ PIWAR_IWS_2G; ++ ++ /* ++ * Assign PIB PMC slot to desired PCI bus ++ */ ++ ++ /* Switch temporarily to I2C bus #2 */ ++ orig_i2c_bus = i2c_get_bus_num(); ++ i2c_set_bus_num(1); ++ ++ val8 = 0; ++ i2c_write(0x23, 0x6, 1, &val8, 1); ++ i2c_write(0x23, 0x7, 1, &val8, 1); ++ val8 = 0xff; ++ i2c_write(0x23, 0x2, 1, &val8, 1); ++ i2c_write(0x23, 0x3, 1, &val8, 1); ++ ++ val8 = 0; ++ i2c_write(0x26, 0x6, 1, &val8, 1); ++ val8 = 0x34; ++ i2c_write(0x26, 0x7, 1, &val8, 1); ++ ++ val8 = 0xf3; /*PMC1, PMC2, PMC3 slot to PCI bus */ ++ i2c_write(0x26, 0x2, 1, &val8, 1); ++ val8 = 0xff; ++ i2c_write(0x26, 0x3, 1, &val8, 1); ++ ++ val8 = 0; ++ i2c_write(0x27, 0x6, 1, &val8, 1); ++ i2c_write(0x27, 0x7, 1, &val8, 1); ++ val8 = 0xff; ++ i2c_write(0x27, 0x2, 1, &val8, 1); ++ val8 = 0xef; ++ i2c_write(0x27, 0x3, 1, &val8, 1); ++ asm("eieio"); ++ ++ /* Reset to original I2C bus */ ++ i2c_set_bus_num(orig_i2c_bus); ++ ++ /* ++ * Release PCI RST Output signal ++ */ ++ udelay(2000); ++ pci_ctrl[0].gcr = 1; ++ udelay(2000); ++ ++ hose[0].first_busno = 0; ++ hose[0].last_busno = 0xff; ++ ++ /* PCI memory prefetch space */ ++ pci_set_region(hose[0].regions + 0, ++ CFG_PCI_MEM_BASE, ++ CFG_PCI_MEM_PHYS, ++ CFG_PCI_MEM_SIZE, PCI_REGION_MEM | PCI_REGION_PREFETCH); ++ ++ /* PCI memory space */ ++ pci_set_region(hose[0].regions + 1, ++ CFG_PCI_MMIO_BASE, ++ CFG_PCI_MMIO_PHYS, CFG_PCI_MMIO_SIZE, PCI_REGION_MEM); ++ ++ /* PCI IO space */ ++ pci_set_region(hose[0].regions + 2, ++ CFG_PCI_IO_BASE, ++ CFG_PCI_IO_PHYS, CFG_PCI_IO_SIZE, PCI_REGION_IO); ++ ++ /* System memory space */ ++ pci_set_region(hose[0].regions + 3, ++ CFG_PCI_SLV_MEM_LOCAL, ++ CFG_PCI_SLV_MEM_BUS, ++ CFG_PCI_SLV_MEM_SIZE, ++ PCI_REGION_MEM | PCI_REGION_MEMORY); ++ ++ hose[0].region_count = 4; ++ ++ pci_setup_indirect(&hose[0], ++ (CFG_IMMR + 0x8300), (CFG_IMMR + 0x8304)); ++ ++ pci_register_hose(hose); ++ ++ /* ++ * Write command register ++ */ ++ reg16 = 0xff; ++ dev = PCI_BDF(0, 0, 0); ++ pci_hose_read_config_word(&hose[0], dev, PCI_COMMAND, ®16); ++ reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; ++ pci_hose_write_config_word(&hose[0], dev, PCI_COMMAND, reg16); ++ ++ /* ++ * Clear non-reserved bits in status register. ++ */ ++ pci_hose_write_config_word(&hose[0], dev, PCI_STATUS, 0xffff); ++ pci_hose_write_config_byte(&hose[0], dev, PCI_LATENCY_TIMER, 0x80); ++ pci_hose_write_config_byte(&hose[0], dev, PCI_CACHE_LINE_SIZE, 0x08); ++ ++ printf("PCI 32bit bus on PMC1 & PMC2 & PMC3\n"); ++ ++ /* ++ * Hose scan. ++ */ ++ hose->last_busno = pci_hose_scan(hose); ++} ++#endif /* CONFIG_PCISLAVE */ ++ ++#ifdef CONFIG_OF_FLAT_TREE ++void ++ft_pci_setup(void *blob, bd_t *bd) ++{ ++ u32 *p; ++ int len; ++ ++ p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@8500/bus-range", &len); ++ if (p != NULL) { ++ p[0] = hose[0].first_busno; ++ p[1] = hose[0].last_busno; ++ } ++} ++#endif /* CONFIG_OF_FLAT_TREE */ ++#endif /* CONFIG_PCI */ +diff -Naupr u-boot-1.1.6/board/mpc8360emds/u-boot.lds u-boot-1.1.6-fsl-1/board/mpc8360emds/u-boot.lds +--- u-boot-1.1.6/board/mpc8360emds/u-boot.lds 1969-12-31 18:00:00.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/board/mpc8360emds/u-boot.lds 2006-11-10 11:24:28.000000000 -0600 +@@ -0,0 +1,123 @@ ++/* ++ * (C) Copyright 2006 ++ * Wolfgang Denk, DENX Software Engineering, wd@denx.de. ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++OUTPUT_ARCH(powerpc) ++SECTIONS ++{ ++ /* Read-only sections, merged into text segment: */ ++ . = + SIZEOF_HEADERS; ++ .interp : { *(.interp) } ++ .hash : { *(.hash) } ++ .dynsym : { *(.dynsym) } ++ .dynstr : { *(.dynstr) } ++ .rel.text : { *(.rel.text) } ++ .rela.text : { *(.rela.text) } ++ .rel.data : { *(.rel.data) } ++ .rela.data : { *(.rela.data) } ++ .rel.rodata : { *(.rel.rodata) } ++ .rela.rodata : { *(.rela.rodata) } ++ .rel.got : { *(.rel.got) } ++ .rela.got : { *(.rela.got) } ++ .rel.ctors : { *(.rel.ctors) } ++ .rela.ctors : { *(.rela.ctors) } ++ .rel.dtors : { *(.rel.dtors) } ++ .rela.dtors : { *(.rela.dtors) } ++ .rel.bss : { *(.rel.bss) } ++ .rela.bss : { *(.rela.bss) } ++ .rel.plt : { *(.rel.plt) } ++ .rela.plt : { *(.rela.plt) } ++ .init : { *(.init) } ++ .plt : { *(.plt) } ++ .text : ++ { ++ cpu/mpc83xx/start.o (.text) ++ *(.text) ++ *(.fixup) ++ *(.got1) ++ . = ALIGN(16); ++ *(.rodata) ++ *(.rodata1) ++ *(.rodata.str1.4) ++ *(.eh_frame) ++ } ++ .fini : { *(.fini) } =0 ++ .ctors : { *(.ctors) } ++ .dtors : { *(.dtors) } ++ ++ /* Read-write section, merged into data segment: */ ++ . = (. + 0x0FFF) & 0xFFFFF000; ++ _erotext = .; ++ PROVIDE (erotext = .); ++ .reloc : ++ { ++ *(.got) ++ _GOT2_TABLE_ = .; ++ *(.got2) ++ _FIXUP_TABLE_ = .; ++ *(.fixup) ++ } ++ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2; ++ __fixup_entries = (. - _FIXUP_TABLE_) >> 2; ++ ++ .data : ++ { ++ *(.data) ++ *(.data1) ++ *(.sdata) ++ *(.sdata2) ++ *(.dynamic) ++ CONSTRUCTORS ++ } ++ _edata = .; ++ PROVIDE (edata = .); ++ ++ . = .; ++ __u_boot_cmd_start = .; ++ .u_boot_cmd : { *(.u_boot_cmd) } ++ __u_boot_cmd_end = .; ++ ++ ++ . = .; ++ __start___ex_table = .; ++ __ex_table : { *(__ex_table) } ++ __stop___ex_table = .; ++ ++ . = ALIGN(4096); ++ __init_begin = .; ++ .text.init : { *(.text.init) } ++ .data.init : { *(.data.init) } ++ . = ALIGN(4096); ++ __init_end = .; ++ ++ __bss_start = .; ++ .bss : ++ { ++ *(.sbss) *(.scommon) ++ *(.dynbss) ++ *(.bss) ++ *(COMMON) ++ } ++ _end = . ; ++ PROVIDE (end = .); ++} ++ENTRY(_start) +diff -Naupr u-boot-1.1.6/board/prodrive/alpr/alpr.c u-boot-1.1.6-fsl-1/board/prodrive/alpr/alpr.c +--- u-boot-1.1.6/board/prodrive/alpr/alpr.c 1969-12-31 18:00:00.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/board/prodrive/alpr/alpr.c 2006-11-30 12:34:13.000000000 -0600 +@@ -0,0 +1,328 @@ ++/* ++ * (C) Copyright 2006 ++ * Stefan Roese, DENX Software Engineering, sr@denx.de. ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++ ++#include <common.h> ++#include <asm/processor.h> ++#include <spd_sdram.h> ++#include <ppc4xx_enet.h> ++#include <miiphy.h> ++ ++DECLARE_GLOBAL_DATA_PTR; ++ ++extern int alpr_fpga_init(void); ++ ++int board_early_init_f (void) ++{ ++ /*------------------------------------------------------------------------- ++ * Initialize EBC CONFIG ++ *-------------------------------------------------------------------------*/ ++ mtebc(xbcfg, EBC_CFG_LE_UNLOCK | ++ EBC_CFG_PTD_DISABLE | EBC_CFG_RTC_64PERCLK | ++ EBC_CFG_ATC_PREVIOUS | EBC_CFG_DTC_PREVIOUS | ++ EBC_CFG_CTC_PREVIOUS | EBC_CFG_EMC_NONDEFAULT | ++ EBC_CFG_PME_DISABLE | EBC_CFG_PR_32); ++ ++ /*-------------------------------------------------------------------- ++ * Setup the interrupt controller polarities, triggers, etc. ++ *-------------------------------------------------------------------*/ ++ mtdcr (uic0sr, 0xffffffff); /* clear all */ ++ mtdcr (uic0er, 0x00000000); /* disable all */ ++ mtdcr (uic0cr, 0x00000009); /* SMI & UIC1 crit are critical */ ++ mtdcr (uic0pr, 0xfffffe03); /* per manual */ ++ mtdcr (uic0tr, 0x01c00000); /* per manual */ ++ mtdcr (uic0vr, 0x00000001); /* int31 highest, base=0x000 */ ++ mtdcr (uic0sr, 0xffffffff); /* clear all */ ++ ++ mtdcr (uic1sr, 0xffffffff); /* clear all */ ++ mtdcr (uic1er, 0x00000000); /* disable all */ ++ mtdcr (uic1cr, 0x00000000); /* all non-critical */ ++ mtdcr (uic1pr, 0xffffe0ff); /* per ref-board manual */ ++ mtdcr (uic1tr, 0x00ffc000); /* per ref-board manual */ ++ mtdcr (uic1vr, 0x00000001); /* int31 highest, base=0x000 */ ++ mtdcr (uic1sr, 0xffffffff); /* clear all */ ++ ++ mtdcr (uic2sr, 0xffffffff); /* clear all */ ++ mtdcr (uic2er, 0x00000000); /* disable all */ ++ mtdcr (uic2cr, 0x00000000); /* all non-critical */ ++ mtdcr (uic2pr, 0xffffffff); /* per ref-board manual */ ++ mtdcr (uic2tr, 0x00ff8c0f); /* per ref-board manual */ ++ mtdcr (uic2vr, 0x00000001); /* int31 highest, base=0x000 */ ++ mtdcr (uic2sr, 0xffffffff); /* clear all */ ++ ++ mtdcr (uicb0sr, 0xfc000000); /* clear all */ ++ mtdcr (uicb0er, 0x00000000); /* disable all */ ++ mtdcr (uicb0cr, 0x00000000); /* all non-critical */ ++ mtdcr (uicb0pr, 0xfc000000); /* */ ++ mtdcr (uicb0tr, 0x00000000); /* */ ++ mtdcr (uicb0vr, 0x00000001); /* */ ++ ++ /* Setup GPIO/IRQ multiplexing */ ++ mtsdr(sdr_pfc0, 0x01a03e00); ++ ++ return 0; ++} ++ ++int last_stage_init(void) ++{ ++ unsigned short reg; ++ ++ /* ++ * Configure LED's of both Marvell 88E1111 PHY's ++ * ++ * This has to be done after the 4xx ethernet driver is loaded, ++ * so "last_stage_init()" is the right place. ++ */ ++ miiphy_read("ppc_4xx_eth2", CONFIG_PHY2_ADDR, 0x18, ®); ++ reg |= 0x0001; ++ miiphy_write("ppc_4xx_eth2", CONFIG_PHY2_ADDR, 0x18, reg); ++ miiphy_read("ppc_4xx_eth3", CONFIG_PHY3_ADDR, 0x18, ®); ++ reg |= 0x0001; ++ miiphy_write("ppc_4xx_eth3", CONFIG_PHY3_ADDR, 0x18, reg); ++ ++ return 0; ++} ++ ++static int board_rev(void) ++{ ++ int rev; ++ u32 pfc0; ++ ++ /* Setup GPIO14 & 15 as GPIO */ ++ mfsdr(sdr_pfc0, pfc0); ++ pfc0 |= CFG_GPIO_REV0 | CFG_GPIO_REV1; ++ mtsdr(sdr_pfc0, pfc0); ++ ++ /* Setup as input */ ++ out32(GPIO0_TCR, in32(GPIO0_TCR) & ~(CFG_GPIO_REV0 | CFG_GPIO_REV0)); ++ out32(GPIO0_ODR, in32(GPIO0_ODR) & ~(CFG_GPIO_REV0 | CFG_GPIO_REV0)); ++ ++ rev = (in32(GPIO0_IR) >> 16) & 0x3; ++ ++ /* Setup GPIO14 & 15 as non GPIO again */ ++ mfsdr(sdr_pfc0, pfc0); ++ pfc0 &= ~(CFG_GPIO_REV0 | CFG_GPIO_REV1); ++ mtsdr(sdr_pfc0, pfc0); ++ ++ return rev; ++} ++ ++int checkboard (void) ++{ ++ char *s = getenv ("serial#"); ++ ++ printf ("Board: ALPR"); ++ if (s != NULL) { ++ puts (", serial# "); ++ puts (s); ++ } ++ printf(" (Rev. %d)\n", board_rev()); ++ ++ return (0); ++} ++ ++#if defined(CFG_DRAM_TEST) ++int testdram (void) ++{ ++ uint *pstart = (uint *) 0x00000000; ++ uint *pend = (uint *) 0x08000000; ++ uint *p; ++ ++ for (p = pstart; p < pend; p++) ++ *p = 0xaaaaaaaa; ++ ++ for (p = pstart; p < pend; p++) { ++ if (*p != 0xaaaaaaaa) { ++ printf ("SDRAM test fails at: %08x\n", (uint) p); ++ return 1; ++ } ++ } ++ ++ for (p = pstart; p < pend; p++) ++ *p = 0x55555555; ++ ++ for (p = pstart; p < pend; p++) { ++ if (*p != 0x55555555) { ++ printf ("SDRAM test fails at: %08x\n", (uint) p); ++ return 1; ++ } ++ } ++ return 0; ++} ++#endif ++ ++/************************************************************************* ++ * pci_pre_init ++ * ++ * This routine is called just prior to registering the hose and gives ++ * the board the opportunity to check things. Returning a value of zero ++ * indicates that things are bad & PCI initialization should be aborted. ++ * ++ * Different boards may wish to customize the pci controller structure ++ * (add regions, override default access routines, etc) or perform ++ * certain pre-initialization actions. ++ * ++ ************************************************************************/ ++#if defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) ++int pci_pre_init(struct pci_controller * hose ) ++{ ++ unsigned long strap; ++ ++ /*--------------------------------------------------------------------------+ ++ * The ocotea board is always configured as the host & requires the ++ * PCI arbiter to be enabled. ++ *--------------------------------------------------------------------------*/ ++ mfsdr(sdr_sdstp1, strap); ++ if( (strap & SDR0_SDSTP1_PAE_MASK) == 0 ){ ++ printf("PCI: SDR0_STRP1[%08lX] - PCI Arbiter disabled.\n",strap); ++ return 0; ++ } ++ ++ /* FPGA Init */ ++ alpr_fpga_init (); ++ ++ return 1; ++} ++#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) */ ++ ++/************************************************************************* ++ * pci_target_init ++ * ++ * The bootstrap configuration provides default settings for the pci ++ * inbound map (PIM). But the bootstrap config choices are limited and ++ * may not be sufficient for a given board. ++ * ++ ************************************************************************/ ++#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) ++void pci_target_init(struct pci_controller * hose ) ++{ ++ /*--------------------------------------------------------------------------+ ++ * Disable everything ++ *--------------------------------------------------------------------------*/ ++ out32r( PCIX0_PIM0SA, 0 ); /* disable */ ++ out32r( PCIX0_PIM1SA, 0 ); /* disable */ ++ out32r( PCIX0_PIM2SA, 0 ); /* disable */ ++ out32r( PCIX0_EROMBA, 0 ); /* disable expansion rom */ ++ ++ /*--------------------------------------------------------------------------+ ++ * Map all of SDRAM to PCI address 0x0000_0000. Note that the 440 strapping ++ * options to not support sizes such as 128/256 MB. ++ *--------------------------------------------------------------------------*/ ++ out32r( PCIX0_PIM0LAL, CFG_SDRAM_BASE ); ++ out32r( PCIX0_PIM0LAH, 0 ); ++ out32r( PCIX0_PIM0SA, ~(gd->ram_size - 1) | 1 ); ++ ++ out32r( PCIX0_BAR0, 0 ); ++ ++ /*--------------------------------------------------------------------------+ ++ * Program the board's subsystem id/vendor id ++ *--------------------------------------------------------------------------*/ ++ out16r( PCIX0_SBSYSVID, CFG_PCI_SUBSYS_VENDORID ); ++ out16r( PCIX0_SBSYSID, CFG_PCI_SUBSYS_DEVICEID ); ++ ++ out16r( PCIX0_CMD, in16r(PCIX0_CMD) | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER); ++} ++#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */ ++ ++/************************************************************************* ++ * is_pci_host ++ * ++ * This routine is called to determine if a pci scan should be ++ * performed. With various hardware environments (especially cPCI and ++ * PPMC) it's insufficient to depend on the state of the arbiter enable ++ * bit in the strap register, or generic host/adapter assumptions. ++ * ++ * Rather than hard-code a bad assumption in the general 440 code, the ++ * 440 pci code requires the board to decide at runtime. ++ * ++ * Return 0 for adapter mode, non-zero for host (monarch) mode. ++ * ++ * ++ ************************************************************************/ ++#if defined(CONFIG_PCI) ++ ++static void wait_for_pci_ready(void) ++{ ++ /* ++ * Configure EREADY as input ++ */ ++ out32(GPIO0_TCR, in32(GPIO0_TCR) & ~CFG_GPIO_EREADY); ++ udelay(1000); ++ ++ for (;;) { ++ if (in32(GPIO0_IR) & CFG_GPIO_EREADY) ++ return; ++ } ++ ++} ++ ++int is_pci_host(struct pci_controller *hose) ++{ ++ wait_for_pci_ready(); ++ return 1; /* return 1 for host controller */ ++} ++#endif /* defined(CONFIG_PCI) */ ++ ++/************************************************************************* ++ * pci_master_init ++ * ++ ************************************************************************/ ++#if defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT) ++void pci_master_init(struct pci_controller *hose) ++{ ++ /*--------------------------------------------------------------------------+ ++ | PowerPC440 PCI Master configuration. ++ | Map PLB/processor addresses to PCI memory space. ++ | PLB address 0xA0000000-0xCFFFFFFF ==> PCI address 0x80000000-0xCFFFFFFF ++ | Use byte reversed out routines to handle endianess. ++ | Make this region non-prefetchable. ++ +--------------------------------------------------------------------------*/ ++ out32r( PCIX0_POM0SA, 0 ); /* disable */ ++ out32r( PCIX0_POM1SA, 0 ); /* disable */ ++ out32r( PCIX0_POM2SA, 0 ); /* disable */ ++ ++ out32r(PCIX0_POM0LAL, CFG_PCI_MEMBASE); /* PMM0 Local Address */ ++ out32r(PCIX0_POM0LAH, 0x00000003); /* PMM0 Local Address */ ++ out32r(PCIX0_POM0PCIAL, CFG_PCI_MEMBASE); /* PMM0 PCI Low Address */ ++ out32r(PCIX0_POM0PCIAH, 0x00000000); /* PMM0 PCI High Address */ ++ out32r(PCIX0_POM0SA, ~(0x10000000 - 1) | 1); /* 256MB + enable region */ ++ ++ out32r(PCIX0_POM1LAL, CFG_PCI_MEMBASE2); /* PMM0 Local Address */ ++ out32r(PCIX0_POM1LAH, 0x00000003); /* PMM0 Local Address */ ++ out32r(PCIX0_POM1PCIAL, CFG_PCI_MEMBASE2); /* PMM0 PCI Low Address */ ++ out32r(PCIX0_POM1PCIAH, 0x00000000); /* PMM0 PCI High Address */ ++ out32r(PCIX0_POM1SA, ~(0x10000000 - 1) | 1); /* 256MB + enable region */ ++} ++#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT) */ ++ ++#ifdef CONFIG_POST ++/* ++ * Returns 1 if keys pressed to start the power-on long-running tests ++ * Called from board_init_f(). ++ */ ++int post_hotkeys_pressed(void) ++{ ++ ++ return (ctrlc()); ++} ++#endif +diff -Naupr u-boot-1.1.6/board/prodrive/alpr/config.mk u-boot-1.1.6-fsl-1/board/prodrive/alpr/config.mk +--- u-boot-1.1.6/board/prodrive/alpr/config.mk 1969-12-31 18:00:00.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/board/prodrive/alpr/config.mk 2006-11-30 12:34:13.000000000 -0600 +@@ -0,0 +1,44 @@ ++# ++# (C) Copyright 2004 ++# Wolfgang Denk, DENX Software Engineering, wd@denx.de. ++# ++# See file CREDITS for list of people who contributed to this ++# project. ++# ++# This program is free software; you can redistribute it and/or ++# modify it under the terms of the GNU General Public License as ++# published by the Free Software Foundation; either version 2 of ++# the License, or (at your option) any later version. ++# ++# This program is distributed in the hope that it will be useful, ++# but WITHOUT ANY WARRANTY; without even the implied warranty of ++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++# GNU General Public License for more details. ++# ++# You should have received a copy of the GNU General Public License ++# along with this program; if not, write to the Free Software ++# Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++# MA 02111-1307 USA ++# ++ ++# ++# AMCC 440GX Reference Platform (Ocotea) board ++# ++ ++#TEXT_BASE = 0xFFFE0000 ++ ++ifeq ($(ramsym),1) ++TEXT_BASE = 0x07FD0000 ++else ++TEXT_BASE = 0xFFFC0000 ++endif ++ ++PLATFORM_CPPFLAGS += -DCONFIG_440=1 ++ ++ifeq ($(debug),1) ++PLATFORM_CPPFLAGS += -DDEBUG ++endif ++ ++ifeq ($(dbcr),1) ++PLATFORM_CPPFLAGS += -DCFG_INIT_DBCR=0x8cff0000 ++endif +diff -Naupr u-boot-1.1.6/board/prodrive/alpr/fpga.c u-boot-1.1.6-fsl-1/board/prodrive/alpr/fpga.c +--- u-boot-1.1.6/board/prodrive/alpr/fpga.c 1969-12-31 18:00:00.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/board/prodrive/alpr/fpga.c 2006-11-30 12:34:13.000000000 -0600 +@@ -0,0 +1,257 @@ ++/* ++ * (C) Copyright 2006 ++ * Heiko Schocher, DENX Software Engineering, hs@denx.de ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ * ++ */ ++ ++/* ++ * Altera FPGA configuration support for the ALPR computer from prodrive ++ */ ++ ++#include <common.h> ++#include <altera.h> ++#include <ACEX1K.h> ++#include <command.h> ++#include <asm-ppc/processor.h> ++#include <ppc440.h> ++#include "fpga.h" ++ ++DECLARE_GLOBAL_DATA_PTR; ++ ++#if defined(CONFIG_FPGA) ++ ++#ifdef FPGA_DEBUG ++#define PRINTF(fmt,args...) printf (fmt ,##args) ++#else ++#define PRINTF(fmt,args...) ++#endif ++ ++static unsigned long regval; ++ ++#define SET_GPIO_REG_0(reg, bit) { \ ++ regval = in32(reg); \ ++ regval &= ~(0x80000000 >> bit); \ ++ out32(reg, regval); \ ++ } ++ ++#define SET_GPIO_REG_1(reg, bit) { \ ++ regval = in32(reg); \ ++ regval |= (0x80000000 >> bit); \ ++ out32(reg, regval); \ ++ } ++ ++#define SET_GPIO_0(bit) SET_GPIO_REG_0(GPIO0_OR, bit) ++#define SET_GPIO_1(bit) SET_GPIO_REG_1(GPIO0_OR, bit) ++ ++#define FPGA_PRG (0x80000000 >> CFG_GPIO_PROG_EN) ++#define FPGA_CONFIG (0x80000000 >> CFG_GPIO_CONFIG) ++#define FPGA_DATA (0x80000000 >> CFG_GPIO_DATA) ++#define FPGA_CLK (0x80000000 >> CFG_GPIO_CLK) ++#define OLD_VAL (FPGA_PRG | FPGA_CONFIG) ++ ++#define SET_FPGA(data) out32(GPIO0_OR, data) ++ ++#define FPGA_WRITE_1 { \ ++ SET_FPGA(OLD_VAL | 0 | FPGA_DATA); /* set data to 1 */ \ ++ SET_FPGA(OLD_VAL | FPGA_CLK | FPGA_DATA);} /* set data to 1 */ ++ ++#define FPGA_WRITE_0 { \ ++ SET_FPGA(OLD_VAL | 0 | 0 ); /* set data to 0 */ \ ++ SET_FPGA(OLD_VAL | FPGA_CLK | 0 );} /* set data to 1 */ ++ ++/* Plattforminitializations */ ++/* Here we have to set the FPGA Chain */ ++/* PROGRAM_PROG_EN = HIGH */ ++/* PROGRAM_SEL_DPR = LOW */ ++int fpga_pre_fn (int cookie) ++{ ++ unsigned long reg; ++ ++ reg = in32(GPIO0_IR); ++ /* Enable the FPGA Chain */ ++ SET_GPIO_REG_1(GPIO0_TCR, CFG_GPIO_PROG_EN); ++ SET_GPIO_REG_0(GPIO0_ODR, CFG_GPIO_PROG_EN); ++ SET_GPIO_1(CFG_GPIO_PROG_EN); ++ SET_GPIO_REG_1(GPIO0_TCR, CFG_GPIO_SEL_DPR); ++ SET_GPIO_REG_0(GPIO0_ODR, CFG_GPIO_SEL_DPR); ++ SET_GPIO_0((CFG_GPIO_SEL_DPR)); ++ ++ /* initialize the GPIO Pins */ ++ /* output */ ++ SET_GPIO_0(CFG_GPIO_CLK); ++ SET_GPIO_REG_1(GPIO0_TCR, CFG_GPIO_CLK); ++ SET_GPIO_REG_0(GPIO0_ODR, CFG_GPIO_CLK); ++ ++ /* output */ ++ SET_GPIO_0(CFG_GPIO_DATA); ++ SET_GPIO_REG_1(GPIO0_TCR, CFG_GPIO_DATA); ++ SET_GPIO_REG_0(GPIO0_ODR, CFG_GPIO_DATA); ++ ++ /* First we set STATUS to 0 then as an input */ ++ SET_GPIO_REG_1(GPIO0_TCR, CFG_GPIO_STATUS); ++ SET_GPIO_REG_0(GPIO0_ODR, CFG_GPIO_STATUS); ++ SET_GPIO_0(CFG_GPIO_STATUS); ++ SET_GPIO_REG_0(GPIO0_TCR, CFG_GPIO_STATUS); ++ SET_GPIO_REG_0(GPIO0_ODR, CFG_GPIO_STATUS); ++ ++ /* output */ ++ SET_GPIO_REG_1(GPIO0_TCR, CFG_GPIO_CONFIG); ++ SET_GPIO_REG_0(GPIO0_ODR, CFG_GPIO_CONFIG); ++ SET_GPIO_0(CFG_GPIO_CONFIG); ++ ++ /* input */ ++ SET_GPIO_0(CFG_GPIO_CON_DON); ++ SET_GPIO_REG_0(GPIO0_TCR, CFG_GPIO_CON_DON); ++ SET_GPIO_REG_0(GPIO0_ODR, CFG_GPIO_CON_DON); ++ ++ /* CONFIG = 0 STATUS = 0 -> FPGA in reset state */ ++ SET_GPIO_0(CFG_GPIO_CONFIG); ++ return FPGA_SUCCESS; ++} ++ ++/* Set the state of CONFIG Pin */ ++int fpga_config_fn (int assert_config, int flush, int cookie) ++{ ++ if (assert_config) { ++ SET_GPIO_1(CFG_GPIO_CONFIG); ++ } else { ++ SET_GPIO_0(CFG_GPIO_CONFIG); ++ } ++ return FPGA_SUCCESS; ++} ++ ++/* Returns the state of STATUS Pin */ ++int fpga_status_fn (int cookie) ++{ ++ unsigned long reg; ++ ++ reg = in32(GPIO0_IR); ++ if (reg &= (0x80000000 >> CFG_GPIO_STATUS)) { ++ PRINTF("STATUS = HIGH\n"); ++ return FPGA_FAIL; ++ } ++ PRINTF("STATUS = LOW\n"); ++ return FPGA_SUCCESS; ++} ++ ++/* Returns the state of CONF_DONE Pin */ ++int fpga_done_fn (int cookie) ++{ ++ unsigned long reg; ++ reg = in32(GPIO0_IR); ++ if (reg &= (0x80000000 >> CFG_GPIO_CON_DON)) { ++ PRINTF("CONF_DON = HIGH\n"); ++ return FPGA_FAIL; ++ } ++ PRINTF("CONF_DON = LOW\n"); ++ return FPGA_SUCCESS; ++} ++ ++/* writes the complete buffer to the FPGA ++ writing the complete buffer in one function is much faster, ++ then calling it for every bit */ ++int fpga_write_fn (void *buf, size_t len, int flush, int cookie) ++{ ++ size_t bytecount = 0; ++ unsigned char *data = (unsigned char *) buf; ++ unsigned char val=0; ++ int i; ++ int len_40 = len / 40; ++ ++ while (bytecount < len) { ++ val = data[bytecount++]; ++ i = 8; ++ do { ++ if (val & 0x01) { ++ FPGA_WRITE_1; ++ } else { ++ FPGA_WRITE_0; ++ } ++ val >>= 1; ++ i --; ++ } while (i > 0); ++ ++#ifdef CFG_FPGA_PROG_FEEDBACK ++ if (bytecount % len_40 == 0) { ++ putc ('.'); /* let them know we are alive */ ++#ifdef CFG_FPGA_CHECK_CTRLC ++ if (ctrlc ()) ++ return FPGA_FAIL; ++#endif ++ } ++#endif ++ } ++ return FPGA_SUCCESS; ++} ++ ++/* called, when programming is aborted */ ++int fpga_abort_fn (int cookie) ++{ ++ SET_GPIO_1((CFG_GPIO_SEL_DPR)); ++ return FPGA_SUCCESS; ++} ++ ++/* called, when programming was succesful */ ++int fpga_post_fn (int cookie) ++{ ++ return fpga_abort_fn (cookie); ++} ++ ++/* Note that these are pointers to code that is in Flash. They will be ++ * relocated at runtime. ++ */ ++Altera_CYC2_Passive_Serial_fns fpga_fns = { ++ fpga_pre_fn, ++ fpga_config_fn, ++ fpga_status_fn, ++ fpga_done_fn, ++ fpga_write_fn, ++ fpga_abort_fn, ++ fpga_post_fn ++}; ++ ++Altera_desc fpga[CONFIG_FPGA_COUNT] = { ++ {Altera_CYC2, ++ passive_serial, ++ Altera_EP2C35_SIZE, ++ (void *) &fpga_fns, ++ NULL, ++ 0} ++}; ++ ++/* ++ * Initialize the fpga. Return 1 on success, 0 on failure. ++ */ ++int alpr_fpga_init (void) ++{ ++ int i; ++ ++ PRINTF ("%s:%d: Initialize FPGA interface (relocation offset = 0x%.8lx)\n", __FUNCTION__, __LINE__, gd->reloc_off); ++ fpga_init (gd->reloc_off); ++ ++ for (i = 0; i < CONFIG_FPGA_COUNT; i++) { ++ PRINTF ("%s:%d: Adding fpga %d\n", __FUNCTION__, __LINE__, i); ++ fpga_add (fpga_altera, &fpga[i]); ++ } ++ return 1; ++} ++ ++#endif +diff -Naupr u-boot-1.1.6/board/prodrive/alpr/init.S u-boot-1.1.6-fsl-1/board/prodrive/alpr/init.S +--- u-boot-1.1.6/board/prodrive/alpr/init.S 1969-12-31 18:00:00.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/board/prodrive/alpr/init.S 2006-11-30 12:34:13.000000000 -0600 +@@ -0,0 +1,103 @@ ++/* ++ * (C) Copyright 2006 ++ * Stefan Roese, DENX Software Engineering, sr@denx.de. ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#include <ppc_asm.tmpl> ++#include <config.h> ++ ++/* General */ ++#define TLB_VALID 0x00000200 ++ ++/* Supported page sizes */ ++#define SZ_1K 0x00000000 ++#define SZ_4K 0x00000010 ++#define SZ_16K 0x00000020 ++#define SZ_64K 0x00000030 ++#define SZ_256K 0x00000040 ++#define SZ_1M 0x00000050 ++#define SZ_16M 0x00000070 ++#define SZ_256M 0x00000090 ++ ++/* Storage attributes */ ++#define SA_W 0x00000800 /* Write-through */ ++#define SA_I 0x00000400 /* Caching inhibited */ ++#define SA_M 0x00000200 /* Memory coherence */ ++#define SA_G 0x00000100 /* Guarded */ ++#define SA_E 0x00000080 /* Endian */ ++ ++/* Access control */ ++#define AC_X 0x00000024 /* Execute */ ++#define AC_W 0x00000012 /* Write */ ++#define AC_R 0x00000009 /* Read */ ++ ++/* Some handy macros */ ++ ++#define EPN(e) ((e) & 0xfffffc00) ++#define TLB0(epn,sz) ( (EPN((epn)) | (sz) | TLB_VALID ) ) ++#define TLB1(rpn,erpn) ( ((rpn)&0xfffffc00) | (erpn) ) ++#define TLB2(a) ( (a)&0x00000fbf ) ++ ++#define tlbtab_start\ ++ mflr r1 ;\ ++ bl 0f ; ++ ++#define tlbtab_end\ ++ .long 0, 0, 0 ; \ ++0: mflr r0 ; \ ++ mtlr r1 ; \ ++ blr ; ++ ++#define tlbentry(epn,sz,rpn,erpn,attr)\ ++ .long TLB0(epn,sz),TLB1(rpn,erpn),TLB2(attr) ++ ++ ++/************************************************************************** ++ * TLB TABLE ++ * ++ * This table is used by the cpu boot code to setup the initial tlb ++ * entries. Rather than make broad assumptions in the cpu source tree, ++ * this table lets each board set things up however they like. ++ * ++ * Pointer to the table is returned in r1 ++ * ++ *************************************************************************/ ++ ++ .section .bootpg,"ax" ++ .globl tlbtab ++ ++tlbtab: ++ tlbtab_start ++ tlbentry( 0xff000000, SZ_16M, 0xff000000, 1, AC_R|AC_W|AC_X|SA_G|SA_I ) ++ tlbentry( CFG_PERIPHERAL_BASE, SZ_256M, 0x40000000, 1, AC_R|AC_W|SA_G|SA_I ) ++ tlbentry( CFG_ISRAM_BASE, SZ_4K, 0x80000000, 0, AC_R|AC_W|AC_X ) ++ tlbentry( CFG_ISRAM_BASE + 0x1000, SZ_4K, 0x80001000, 0, AC_R|AC_W|AC_X ) ++ tlbentry( CFG_SDRAM_BASE, SZ_256M, 0x00000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I ) ++ tlbentry( CFG_PCI_BASE, SZ_256M, 0x00000000, 2, AC_R|AC_W|SA_G|SA_I ) ++ ++ /* PCI */ ++ tlbentry( CFG_PCI_MEMBASE, SZ_256M, CFG_PCI_MEMBASE, 3, AC_R|AC_W|SA_G|SA_I ) ++ tlbentry( CFG_PCI_MEMBASE1, SZ_256M, CFG_PCI_MEMBASE1, 3, AC_R|AC_W|SA_G|SA_I ) ++ tlbentry( CFG_PCI_MEMBASE2, SZ_256M, CFG_PCI_MEMBASE2, 3, AC_R|AC_W|SA_G|SA_I ) ++ ++ /* NAND */ ++ tlbentry( CFG_NAND_BASE, SZ_4K, CFG_NAND_BASE, 1, AC_R|AC_W|AC_X|SA_G|SA_I ) ++ tlbtab_end +diff -Naupr u-boot-1.1.6/board/prodrive/alpr/Makefile u-boot-1.1.6-fsl-1/board/prodrive/alpr/Makefile +--- u-boot-1.1.6/board/prodrive/alpr/Makefile 1969-12-31 18:00:00.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/board/prodrive/alpr/Makefile 2006-11-30 12:34:13.000000000 -0600 +@@ -0,0 +1,51 @@ ++# ++# (C) Copyright 2006 ++# Wolfgang Denk, DENX Software Engineering, wd@denx.de. ++# ++# See file CREDITS for list of people who contributed to this ++# project. ++# ++# This program is free software; you can redistribute it and/or ++# modify it under the terms of the GNU General Public License as ++# published by the Free Software Foundation; either version 2 of ++# the License, or (at your option) any later version. ++# ++# This program is distributed in the hope that it will be useful, ++# but WITHOUT ANY WARRANTY; without even the implied warranty of ++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++# GNU General Public License for more details. ++# ++# You should have received a copy of the GNU General Public License ++# along with this program; if not, write to the Free Software ++# Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++# MA 02111-1307 USA ++# ++ ++include $(TOPDIR)/config.mk ++ ++LIB = $(obj)lib$(BOARD).a ++ ++COBJS = $(BOARD).o fpga.o nand.o ++SOBJS = init.o ++ ++SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) ++OBJS := $(addprefix $(obj),$(COBJS)) ++SOBJS := $(addprefix $(obj),$(SOBJS)) ++ ++$(LIB): $(OBJS) $(SOBJS) ++ $(AR) $(ARFLAGS) $@ $(OBJS) ++ ++clean: ++ rm -f $(SOBJS) $(OBJS) ++ ++distclean: clean ++ rm -f $(LIB) core *.bak .depend *~ ++ ++######################################################################### ++ ++# defines $(obj).depend target ++include $(SRCTREE)/rules.mk ++ ++sinclude $(obj).depend ++ ++######################################################################### +diff -Naupr u-boot-1.1.6/board/prodrive/alpr/nand.c u-boot-1.1.6-fsl-1/board/prodrive/alpr/nand.c +--- u-boot-1.1.6/board/prodrive/alpr/nand.c 1969-12-31 18:00:00.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/board/prodrive/alpr/nand.c 2006-11-30 12:34:13.000000000 -0600 +@@ -0,0 +1,173 @@ ++/* ++ * (C) Copyright 2006 ++ * Heiko Schocher, DENX Software Engineering, hs@denx.de ++ * ++ * (C) Copyright 2006 ++ * Stefan Roese, DENX Software Engineering, sr@denx.de. ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#include <common.h> ++ ++#if (CONFIG_COMMANDS & CFG_CMD_NAND) ++ ++#include <asm/processor.h> ++#include <nand.h> ++ ++struct alpr_ndfc_regs { ++ u8 cmd[4]; ++ u8 addr_wait; ++ u8 term; ++ u8 dummy; ++ u8 dummy2; ++ u8 data; ++}; ++ ++static u8 hwctl; ++static struct alpr_ndfc_regs *alpr_ndfc = NULL; ++ ++#define readb(addr) (u8)(*(volatile u8 *)(addr)) ++#define writeb(d,addr) *(volatile u8 *)(addr) = ((u8)(d)) ++ ++/* ++ * The ALPR has a NAND Flash Controller (NDFC) that handles all accesses to ++ * the NAND devices. The NDFC has command, address and data registers that ++ * when accessed will set up the NAND flash pins appropriately. We'll use the ++ * hwcontrol function to save the configuration in a global variable. ++ * We can then use this information in the read and write functions to ++ * determine which NDFC register to access. ++ * ++ * There are 2 NAND devices on the board, a Hynix HY27US08561A (1 GByte). ++ */ ++static void alpr_nand_hwcontrol(struct mtd_info *mtd, int cmd) ++{ ++ switch (cmd) { ++ case NAND_CTL_SETCLE: ++ hwctl |= 0x1; ++ break; ++ case NAND_CTL_CLRCLE: ++ hwctl &= ~0x1; ++ break; ++ case NAND_CTL_SETALE: ++ hwctl |= 0x2; ++ break; ++ case NAND_CTL_CLRALE: ++ hwctl &= ~0x2; ++ break; ++ case NAND_CTL_SETNCE: ++ break; ++ case NAND_CTL_CLRNCE: ++ writeb(0x00, &(alpr_ndfc->term)); ++ break; ++ } ++} ++ ++static void alpr_nand_write_byte(struct mtd_info *mtd, u_char byte) ++{ ++ struct nand_chip *nand = mtd->priv; ++ ++ if (hwctl & 0x1) ++ /* ++ * IO_ADDR_W used as CMD[i] reg to support multiple NAND ++ * chips. ++ */ ++ writeb(byte, nand->IO_ADDR_W); ++ else if (hwctl & 0x2) { ++ writeb(byte, &(alpr_ndfc->addr_wait)); ++ } else ++ writeb(byte, &(alpr_ndfc->data)); ++} ++ ++static u_char alpr_nand_read_byte(struct mtd_info *mtd) ++{ ++ return readb(&(alpr_ndfc->data)); ++} ++ ++static void alpr_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len) ++{ ++ struct nand_chip *nand = mtd->priv; ++ int i; ++ ++ for (i = 0; i < len; i++) { ++ if (hwctl & 0x1) ++ /* ++ * IO_ADDR_W used as CMD[i] reg to support multiple NAND ++ * chips. ++ */ ++ writeb(buf[i], nand->IO_ADDR_W); ++ else if (hwctl & 0x2) ++ writeb(buf[i], &(alpr_ndfc->addr_wait)); ++ else ++ writeb(buf[i], &(alpr_ndfc->data)); ++ } ++} ++ ++static void alpr_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len) ++{ ++ int i; ++ ++ for (i = 0; i < len; i++) { ++ buf[i] = readb(&(alpr_ndfc->data)); ++ } ++} ++ ++static int alpr_nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len) ++{ ++ int i; ++ ++ for (i = 0; i < len; i++) ++ if (buf[i] != readb(&(alpr_ndfc->data))) ++ return i; ++ ++ return 0; ++} ++ ++static int alpr_nand_dev_ready(struct mtd_info *mtd) ++{ ++ volatile u_char val; ++ ++ /* ++ * Blocking read to wait for NAND to be ready ++ */ ++ val = readb(&(alpr_ndfc->addr_wait)); ++ ++ /* ++ * Return always true ++ */ ++ return 1; ++} ++ ++void board_nand_init(struct nand_chip *nand) ++{ ++ alpr_ndfc = (struct alpr_ndfc_regs *)CFG_NAND_BASE; ++ ++ nand->eccmode = NAND_ECC_SOFT; ++ ++ /* Reference hardware control function */ ++ nand->hwcontrol = alpr_nand_hwcontrol; ++ /* Set command delay time */ ++ nand->write_byte = alpr_nand_write_byte; ++ nand->read_byte = alpr_nand_read_byte; ++ nand->write_buf = alpr_nand_write_buf; ++ nand->read_buf = alpr_nand_read_buf; ++ nand->verify_buf = alpr_nand_verify_buf; ++ nand->dev_ready = alpr_nand_dev_ready; ++} ++#endif +diff -Naupr u-boot-1.1.6/board/prodrive/alpr/u-boot.lds u-boot-1.1.6-fsl-1/board/prodrive/alpr/u-boot.lds +--- u-boot-1.1.6/board/prodrive/alpr/u-boot.lds 1969-12-31 18:00:00.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/board/prodrive/alpr/u-boot.lds 2006-11-30 12:34:13.000000000 -0600 +@@ -0,0 +1,157 @@ ++/* ++ * (C) Copyright 2004 ++ * Wolfgang Denk, DENX Software Engineering, wd@denx.de. ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++OUTPUT_ARCH(powerpc) ++SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib); ++/* Do we need any of these for elf? ++ __DYNAMIC = 0; */ ++SECTIONS ++{ ++ .resetvec 0xFFFFFFFC : ++ { ++ *(.resetvec) ++ } = 0xffff ++ ++ .bootpg 0xFFFFF000 : ++ { ++ cpu/ppc4xx/start.o (.bootpg) ++ } = 0xffff ++ ++ /* Read-only sections, merged into text segment: */ ++ . = + SIZEOF_HEADERS; ++ .interp : { *(.interp) } ++ .hash : { *(.hash) } ++ .dynsym : { *(.dynsym) } ++ .dynstr : { *(.dynstr) } ++ .rel.text : { *(.rel.text) } ++ .rela.text : { *(.rela.text) } ++ .rel.data : { *(.rel.data) } ++ .rela.data : { *(.rela.data) } ++ .rel.rodata : { *(.rel.rodata) } ++ .rela.rodata : { *(.rela.rodata) } ++ .rel.got : { *(.rel.got) } ++ .rela.got : { *(.rela.got) } ++ .rel.ctors : { *(.rel.ctors) } ++ .rela.ctors : { *(.rela.ctors) } ++ .rel.dtors : { *(.rel.dtors) } ++ .rela.dtors : { *(.rela.dtors) } ++ .rel.bss : { *(.rel.bss) } ++ .rela.bss : { *(.rela.bss) } ++ .rel.plt : { *(.rel.plt) } ++ .rela.plt : { *(.rela.plt) } ++ .init : { *(.init) } ++ .plt : { *(.plt) } ++ .text : ++ { ++ /* WARNING - the following is hand-optimized to fit within */ ++ /* the sector layout of our flash chips! XXX FIXME XXX */ ++ ++ cpu/ppc4xx/start.o (.text) ++ board/prodrive/alpr/init.o (.text) ++ cpu/ppc4xx/kgdb.o (.text) ++ cpu/ppc4xx/traps.o (.text) ++ cpu/ppc4xx/interrupts.o (.text) ++ cpu/ppc4xx/serial.o (.text) ++ cpu/ppc4xx/cpu_init.o (.text) ++ cpu/ppc4xx/speed.o (.text) ++ common/dlmalloc.o (.text) ++ lib_generic/crc32.o (.text) ++ lib_ppc/extable.o (.text) ++ lib_generic/zlib.o (.text) ++ ++/* . = env_offset;*/ ++/* common/environment.o(.text)*/ ++ ++ *(.text) ++ *(.fixup) ++ *(.got1) ++ } ++ _etext = .; ++ PROVIDE (etext = .); ++ .rodata : ++ { ++ *(.rodata) ++ *(.rodata1) ++ *(.rodata.str1.4) ++ *(.eh_frame) ++ } ++ .fini : { *(.fini) } =0 ++ .ctors : { *(.ctors) } ++ .dtors : { *(.dtors) } ++ ++ /* Read-write section, merged into data segment: */ ++ . = (. + 0x00FF) & 0xFFFFFF00; ++ _erotext = .; ++ PROVIDE (erotext = .); ++ .reloc : ++ { ++ *(.got) ++ _GOT2_TABLE_ = .; ++ *(.got2) ++ _FIXUP_TABLE_ = .; ++ *(.fixup) ++ } ++ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; ++ __fixup_entries = (. - _FIXUP_TABLE_)>>2; ++ ++ .data : ++ { ++ *(.data) ++ *(.data1) ++ *(.sdata) ++ *(.sdata2) ++ *(.dynamic) ++ CONSTRUCTORS ++ } ++ _edata = .; ++ PROVIDE (edata = .); ++ ++ . = .; ++ __u_boot_cmd_start = .; ++ .u_boot_cmd : { *(.u_boot_cmd) } ++ __u_boot_cmd_end = .; ++ ++ ++ . = .; ++ __start___ex_table = .; ++ __ex_table : { *(__ex_table) } ++ __stop___ex_table = .; ++ ++ . = ALIGN(256); ++ __init_begin = .; ++ .text.init : { *(.text.init) } ++ .data.init : { *(.data.init) } ++ . = ALIGN(256); ++ __init_end = .; ++ ++ __bss_start = .; ++ .bss : ++ { ++ *(.sbss) *(.scommon) ++ *(.dynbss) ++ *(.bss) ++ *(COMMON) ++ } ++ _end = . ; ++ PROVIDE (end = .); ++} +diff -Naupr u-boot-1.1.6/board/prodrive/common/flash.c u-boot-1.1.6-fsl-1/board/prodrive/common/flash.c +--- u-boot-1.1.6/board/prodrive/common/flash.c 2006-11-02 08:15:01.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/board/prodrive/common/flash.c 2006-11-30 12:34:13.000000000 -0600 +@@ -48,6 +48,7 @@ void flash_print_info(flash_info_t *info + case FLASH_MAN_AMD: printf ("AMD "); break; + case FLASH_MAN_FUJ: printf ("FUJITSU "); break; + case FLASH_MAN_SST: printf ("SST "); break; ++ case FLASH_MAN_STM: printf ("ST "); break; + case FLASH_MAN_EXCEL: printf ("Excel Semiconductor "); break; + default: printf ("Unknown Vendor "); break; + } +@@ -156,6 +157,9 @@ static ulong flash_get_size(vu_long *add + case (CFG_FLASH_WORD_SIZE)SST_MANUFACT: + info->flash_id = FLASH_MAN_SST; + break; ++ case (CFG_FLASH_WORD_SIZE)STM_MANUFACT: ++ info->flash_id = FLASH_MAN_STM; ++ break; + case (CFG_FLASH_WORD_SIZE)EXCEL_MANUFACT: + info->flash_id = FLASH_MAN_EXCEL; + break; +diff -Naupr u-boot-1.1.6/board/prodrive/p3mx/64460.h u-boot-1.1.6-fsl-1/board/prodrive/p3mx/64460.h +--- u-boot-1.1.6/board/prodrive/p3mx/64460.h 1969-12-31 18:00:00.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/board/prodrive/p3mx/64460.h 2006-12-06 10:33:49.000000000 -0600 +@@ -0,0 +1,52 @@ ++/* ++ * (C) Copyright 2003 ++ * Ingo Assmus <ingo.assmus@keymile.com> ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++/* ++ * main board support/init for the Galileo Eval board DB64460. ++ */ ++ ++#ifndef __64460_H__ ++#define __64460_H__ ++ ++/* CPU Configuration bits */ ++#define CPU_CONF_ADDR_MISS_EN (1 << 8) ++#define CPU_CONF_SINGLE_CPU (1 << 11) ++#define CPU_CONF_ENDIANESS (1 << 12) ++#define CPU_CONF_PIPELINE (1 << 13) ++#define CPU_CONF_STOP_RETRY (1 << 17) ++#define CPU_CONF_MULTI_DECODE (1 << 18) ++#define CPU_CONF_DP_VALID (1 << 19) ++#define CPU_CONF_PERR_PROP (1 << 22) ++#define CPU_CONF_AACK_DELAY_2 (1 << 25) ++#define CPU_CONF_AP_VALID (1 << 26) ++#define CPU_CONF_REMAP_WR_DIS (1 << 27) ++ ++/* CPU Master Control bits */ ++#define CPU_MAST_CTL_ARB_EN (1 << 8) ++#define CPU_MAST_CTL_MASK_BR_1 (1 << 9) ++#define CPU_MAST_CTL_M_WR_TRIG (1 << 10) ++#define CPU_MAST_CTL_M_RD_TRIG (1 << 11) ++#define CPU_MAST_CTL_CLEAN_BLK (1 << 12) ++#define CPU_MAST_CTL_FLUSH_BLK (1 << 13) ++ ++#endif /* __64460_H__ */ +diff -Naupr u-boot-1.1.6/board/prodrive/p3mx/config.mk u-boot-1.1.6-fsl-1/board/prodrive/p3mx/config.mk +--- u-boot-1.1.6/board/prodrive/p3mx/config.mk 1969-12-31 18:00:00.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/board/prodrive/p3mx/config.mk 2006-12-06 10:33:49.000000000 -0600 +@@ -0,0 +1,28 @@ ++# ++# (C) Copyright 2002-2006 ++# Wolfgang Denk, DENX Software Engineering, wd@denx.de. ++# ++# See file CREDITS for list of people who contributed to this ++# project. ++# ++# This program is free software; you can redistribute it and/or ++# modify it under the terms of the GNU General Public License as ++# published by the Free Software Foundation; either version 2 of ++# the License, or (at your option) any later version. ++# ++# This program is distributed in the hope that it will be useful, ++# but WITHOUT ANY WARRANTY; without even the implied warranty of ++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++# GNU General Public License for more details. ++# ++# You should have received a copy of the GNU General Public License ++# along with this program; if not, write to the Free Software ++# Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++# MA 02111-1307 USA ++# ++ ++# ++# p3mx boards (P3M750 & P3M7448) ++# ++ ++TEXT_BASE = 0xfff00000 +diff -Naupr u-boot-1.1.6/board/prodrive/p3mx/eth.h u-boot-1.1.6-fsl-1/board/prodrive/p3mx/eth.h +--- u-boot-1.1.6/board/prodrive/p3mx/eth.h 1969-12-31 18:00:00.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/board/prodrive/p3mx/eth.h 2006-12-06 10:33:49.000000000 -0600 +@@ -0,0 +1,43 @@ ++/* ++ * (C) Copyright 2001 ++ * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc. ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++/* ++ * eth.h - header file for the polled mode GT ethernet driver ++ */ ++ ++#ifndef __EVB64360_ETH_H__ ++#define __EVB64360_ETH_H__ ++ ++#include <asm/types.h> ++#include <asm/io.h> ++#include <asm/byteorder.h> ++#include <common.h> ++ ++ ++int db64360_eth0_poll(void); ++int db64360_eth0_transmit(unsigned int s, volatile char *p); ++void db64360_eth0_disable(void); ++bool network_start(bd_t *bis); ++ ++ ++#endif /* __EVB64360_ETH_H__ */ +diff -Naupr u-boot-1.1.6/board/prodrive/p3mx/Makefile u-boot-1.1.6-fsl-1/board/prodrive/p3mx/Makefile +--- u-boot-1.1.6/board/prodrive/p3mx/Makefile 1969-12-31 18:00:00.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/board/prodrive/p3mx/Makefile 2006-12-06 10:33:49.000000000 -0600 +@@ -0,0 +1,55 @@ ++# ++# (C) Copyright 2002-2006 ++# Wolfgang Denk, DENX Software Engineering, wd@denx.de. ++# ++# See file CREDITS for list of people who contributed to this ++# project. ++# ++# This program is free software; you can redistribute it and/or ++# modify it under the terms of the GNU General Public License as ++# published by the Free Software Foundation; either version 2 of ++# the License, or (at your option) any later version. ++# ++# This program is distributed in the hope that it will be useful, ++# but WITHOUT ANY WARRANTY; without even the implied warranty of ++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++# GNU General Public License for more details. ++# ++# You should have received a copy of the GNU General Public License ++# along with this program; if not, write to the Free Software ++# Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++# MA 02111-1307 USA ++# ++ ++include $(TOPDIR)/config.mk ++ifneq ($(OBJTREE),$(SRCTREE)) ++$(shell mkdir -p $(obj)../../Marvell/common) ++endif ++ ++LIB = $(obj)lib$(BOARD).a ++ ++SOBJS = misc.o ++COBJS = $(BOARD).o mpsc.o mv_eth.o pci.o sdram_init.o serial.o \ ++ ../../Marvell/common/i2c.o ../../Marvell/common/memory.o ++ ++SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) ++OBJS := $(addprefix $(obj),$(COBJS)) ++SOBJS := $(addprefix $(obj),$(SOBJS)) ++ ++$(LIB): $(obj).depend $(OBJS) $(SOBJS) ++ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) ++ ++clean: ++ rm -f $(SOBJS) $(OBJS) ++ ++distclean: clean ++ rm -f $(LIB) core *.bak .depend *~ ++ ++######################################################################### ++ ++# defines $(obj).depend target ++include $(SRCTREE)/rules.mk ++ ++sinclude $(obj).depend ++ ++######################################################################### +diff -Naupr u-boot-1.1.6/board/prodrive/p3mx/misc.S u-boot-1.1.6-fsl-1/board/prodrive/p3mx/misc.S +--- u-boot-1.1.6/board/prodrive/p3mx/misc.S 1969-12-31 18:00:00.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/board/prodrive/p3mx/misc.S 2006-12-06 10:33:49.000000000 -0600 +@@ -0,0 +1,245 @@ ++#include <config.h> ++#include <74xx_7xx.h> ++#include "version.h" ++ ++#include <ppc_asm.tmpl> ++#include <ppc_defs.h> ++ ++#include <asm/cache.h> ++#include <asm/mmu.h> ++ ++#include "../../Marvell/include/mv_gen_reg.h" ++ ++#ifdef CONFIG_ECC ++ /* Galileo specific asm code for initializing ECC */ ++ .globl board_relocate_rom ++board_relocate_rom: ++ mflr r7 ++ /* update the location of the GT registers */ ++ lis r11, CFG_GT_REGS@h ++ /* if we're using ECC, we must use the DMA engine to copy ourselves */ ++ bl start_idma_transfer_0 ++ bl wait_for_idma_0 ++ bl stop_idma_engine_0 ++ ++ mtlr r7 ++ blr ++ ++ .globl board_init_ecc ++board_init_ecc: ++ mflr r7 ++ /* NOTE: r10 still contains the location we've been relocated to ++ * which happens to be TOP_OF_RAM - CFG_MONITOR_LEN */ ++ ++ /* now that we're running from ram, init the rest of main memory ++ * for ECC use */ ++ lis r8, CFG_MONITOR_LEN@h ++ ori r8, r8, CFG_MONITOR_LEN@l ++ ++ divw r3, r10, r8 ++ ++ /* set up the counter, and init the starting address */ ++ mtctr r3 ++ li r12, 0 ++ ++ /* bytes per transfer */ ++ mr r5, r8 ++about_to_init_ecc: ++1: mr r3, r12 ++ mr r4, r12 ++ bl start_idma_transfer_0 ++ bl wait_for_idma_0 ++ bl stop_idma_engine_0 ++ add r12, r12, r8 ++ bdnz 1b ++ ++ mtlr r7 ++ blr ++ ++ /* r3: dest addr ++ * r4: source addr ++ * r5: byte count ++ * r11: gt regbase ++ * trashes: r6, r5 ++ */ ++start_idma_transfer_0: ++ /* set the byte count, including the OWN bit */ ++ mr r6, r11 ++ ori r6, r6, CHANNEL0_DMA_BYTE_COUNT ++ stwbrx r5, 0, (r6) ++ ++ /* set the source address */ ++ mr r6, r11 ++ ori r6, r6, CHANNEL0_DMA_SOURCE_ADDRESS ++ stwbrx r4, 0, (r6) ++ ++ /* set the dest address */ ++ mr r6, r11 ++ ori r6, r6, CHANNEL0_DMA_DESTINATION_ADDRESS ++ stwbrx r3, 0, (r6) ++ ++ /* set the next record pointer */ ++ li r5, 0 ++ mr r6, r11 ++ ori r6, r6, CHANNEL0NEXT_RECORD_POINTER ++ stwbrx r5, 0, (r6) ++ ++ /* set the low control register */ ++ /* bit 9 is NON chained mode, bit 31 is new style descriptors. ++ bit 12 is channel enable */ ++ ori r5, r5, (1 << 12) | (1 << 12) | (1 << 11) ++ /* 15 shifted by 16 (oris) == bit 31 */ ++ oris r5, r5, (1 << 15) ++ mr r6, r11 ++ ori r6, r6, CHANNEL0CONTROL ++ stwbrx r5, 0, (r6) ++ ++ blr ++ ++ /* this waits for the bytecount to return to zero, indicating ++ * that the trasfer is complete */ ++wait_for_idma_0: ++ mr r5, r11 ++ lis r6, 0xff ++ ori r6, r6, 0xffff ++ ori r5, r5, CHANNEL0_DMA_BYTE_COUNT ++1: lwbrx r4, 0, (r5) ++ and. r4, r4, r6 ++ bne 1b ++ ++ blr ++ ++ /* this turns off channel 0 of the idma engine */ ++stop_idma_engine_0: ++ /* shut off the DMA engine */ ++ li r5, 0 ++ mr r6, r11 ++ ori r6, r6, CHANNEL0CONTROL ++ stwbrx r5, 0, (r6) ++ ++ blr ++#endif ++ ++#ifdef CFG_BOARD_ASM_INIT ++ /* NOTE: trashes r3-r7 */ ++ .globl board_asm_init ++board_asm_init: ++ /* just move the GT registers to where they belong */ ++ lis r3, CFG_DFL_GT_REGS@h ++ ori r3, r3, CFG_DFL_GT_REGS@l ++ lis r4, CFG_GT_REGS@h ++ ori r4, r4, CFG_GT_REGS@l ++ li r5, INTERNAL_SPACE_DECODE ++ ++ /* test to see if we've already moved */ ++ lwbrx r6, r5, r4 ++ andi. r6, r6, 0xffff ++ /* check loading of R7 is: 0x0F80 should: 0xf800: DONE */ ++/* rlwinm r7, r4, 8, 16, 31 ++ rlwinm r7, r4, 12, 16, 31 */ /* original */ ++ rlwinm r7, r4, 16, 16, 31 ++ /* -----------------------------------------------------*/ ++ cmp cr0, r7, r6 ++ beqlr ++ ++ /* nope, have to move the registers */ ++ lwbrx r6, r5, r3 ++ andis. r6, r6, 0xffff ++ or r6, r6, r7 ++ stwbrx r6, r5, r3 ++ ++ /* now, poll for the change */ ++1: lwbrx r7, r5, r4 ++ cmp cr0, r7, r6 ++ bne 1b ++ ++ lis r3, CFG_INT_SRAM_BASE@h ++ ori r3, r3, CFG_INT_SRAM_BASE@l ++ rlwinm r3, r3, 16, 16, 31 ++ lis r4, CFG_GT_REGS@h ++ ori r4, r4, CFG_GT_REGS@l ++ li r5, INTEGRATED_SRAM_BASE_ADDR ++ stwbrx r3, r5, r4 ++ ++2: lwbrx r6, r5, r4 ++ cmp cr0, r3, r6 ++ bne 2b ++ ++ /* done! */ ++ blr ++#endif ++ ++/* For use of the debug LEDs */ ++ .global led_on0_relocated ++led_on0_relocated: ++ xor r21, r21, r21 ++ xor r18, r18, r18 ++ lis r18, 0xFC80 ++ ori r18, r18, 0x8000 ++/* stw r21, 0x0(r18) */ ++ sync ++ blr ++ ++ .global led_off0_relocated ++led_off0_relocated: ++ xor r21, r21, r21 ++ xor r18, r18, r18 ++ lis r18, 0xFC81 ++ ori r18, r18, 0x4000 ++/* stw r21, 0x0(r18) */ ++ sync ++ blr ++ ++ .global led_on0 ++led_on0: ++ xor r18, r18, r18 ++ lis r18, 0x1c80 ++ ori r18, r18, 0x8000 ++/* stw r18, 0x0(r18) */ ++ sync ++ blr ++ ++ .global led_off0 ++led_off0: ++ xor r18, r18, r18 ++ lis r18, 0x1c81 ++ ori r18, r18, 0x4000 ++/* stw r18, 0x0(r18) */ ++ sync ++ blr ++ ++ .global led_on1 ++led_on1: ++ xor r18, r18, r18 ++ lis r18, 0x1c80 ++ ori r18, r18, 0xc000 ++/* stw r18, 0x0(r18) */ ++ sync ++ blr ++ ++ .global led_off1 ++led_off1: ++ xor r18, r18, r18 ++ lis r18, 0x1c81 ++ ori r18, r18, 0x8000 ++/* stw r18, 0x0(r18) */ ++ sync ++ blr ++ ++ .global led_on2 ++led_on2: ++ xor r18, r18, r18 ++ lis r18, 0x1c81 ++ ori r18, r18, 0x0000 ++/* stw r18, 0x0(r18) */ ++ sync ++ blr ++ ++ .global led_off2 ++led_off2: ++ xor r18, r18, r18 ++ lis r18, 0x1c81 ++ ori r18, r18, 0xc000 ++/* stw r18, 0x0(r18) */ ++ sync ++ blr +diff -Naupr u-boot-1.1.6/board/prodrive/p3mx/mpsc.c u-boot-1.1.6-fsl-1/board/prodrive/p3mx/mpsc.c +--- u-boot-1.1.6/board/prodrive/p3mx/mpsc.c 1969-12-31 18:00:00.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/board/prodrive/p3mx/mpsc.c 2006-12-06 10:33:49.000000000 -0600 +@@ -0,0 +1,1013 @@ ++/* ++ * (C) Copyright 2001 ++ * John Clemens <clemens@mclx.com>, Mission Critical Linux, Inc. ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++/************************************************************************* ++ * changes for Marvell DB64460 eval board 2003 by Ingo Assmus <ingo.assmus@keymile.com> ++ * ++ ************************************************************************/ ++ ++/* ++ * mpsc.c - driver for console over the MPSC. ++ */ ++ ++ ++#include <common.h> ++#include <config.h> ++#include <asm/cache.h> ++ ++#include <malloc.h> ++#include "mpsc.h" ++ ++#include "mv_regs.h" ++ ++#include "../../Marvell/include/memory.h" ++ ++DECLARE_GLOBAL_DATA_PTR; ++ ++/* Define this if you wish to use the MPSC as a register based UART. ++ * This will force the serial port to not use the SDMA engine at all. ++ */ ++#undef CONFIG_MPSC_DEBUG_PORT ++ ++ ++int (*mpsc_putchar) (char ch) = mpsc_putchar_early; ++char (*mpsc_getchar) (void) = mpsc_getchar_debug; ++int (*mpsc_test_char) (void) = mpsc_test_char_debug; ++ ++ ++static volatile unsigned int *rx_desc_base = NULL; ++static unsigned int rx_desc_index = 0; ++static volatile unsigned int *tx_desc_base = NULL; ++static unsigned int tx_desc_index = 0; ++ ++/* local function declarations */ ++static int galmpsc_connect (int channel, int connect); ++static int galmpsc_route_rx_clock (int channel, int brg); ++static int galmpsc_route_tx_clock (int channel, int brg); ++static int galmpsc_write_config_regs (int mpsc, int mode); ++static int galmpsc_config_channel_regs (int mpsc); ++static int galmpsc_set_char_length (int mpsc, int value); ++static int galmpsc_set_stop_bit_length (int mpsc, int value); ++static int galmpsc_set_parity (int mpsc, int value); ++static int galmpsc_enter_hunt (int mpsc); ++static int galmpsc_set_brkcnt (int mpsc, int value); ++static int galmpsc_set_tcschar (int mpsc, int value); ++static int galmpsc_set_snoop (int mpsc, int value); ++static int galmpsc_shutdown (int mpsc); ++ ++static int galsdma_set_RFT (int channel); ++static int galsdma_set_SFM (int channel); ++static int galsdma_set_rxle (int channel); ++static int galsdma_set_txle (int channel); ++static int galsdma_set_burstsize (int channel, unsigned int value); ++static int galsdma_set_RC (int channel, unsigned int value); ++ ++static int galbrg_set_CDV (int channel, int value); ++static int galbrg_enable (int channel); ++static int galbrg_disable (int channel); ++static int galbrg_set_clksrc (int channel, int value); ++static int galbrg_set_CUV (int channel, int value); ++ ++static void galsdma_enable_rx (void); ++static int galsdma_set_mem_space (unsigned int memSpace, ++ unsigned int memSpaceTarget, ++ unsigned int memSpaceAttr, ++ unsigned int baseAddress, ++ unsigned int size); ++ ++ ++#define SOFTWARE_CACHE_MANAGEMENT ++ ++#ifdef SOFTWARE_CACHE_MANAGEMENT ++#define FLUSH_DCACHE(a,b) if(dcache_status()){clean_dcache_range((u32)(a),(u32)(b));} ++#define FLUSH_AND_INVALIDATE_DCACHE(a,b) if(dcache_status()){flush_dcache_range((u32)(a),(u32)(b));} ++#define INVALIDATE_DCACHE(a,b) if(dcache_status()){invalidate_dcache_range((u32)(a),(u32)(b));} ++#else ++#define FLUSH_DCACHE(a,b) ++#define FLUSH_AND_INVALIDATE_DCACHE(a,b) ++#define INVALIDATE_DCACHE(a,b) ++#endif ++ ++#ifdef CONFIG_MPSC_DEBUG_PORT ++static void mpsc_debug_init (void) ++{ ++ ++ volatile unsigned int temp; ++ ++ /* Clear the CFR (CHR4) */ ++ /* Write random 'Z' bit (bit 29) of CHR4 to enable debug uart *UNDOCUMENTED FEATURE* */ ++ temp = GTREGREAD (GALMPSC_CHANNELREG_4 + (CHANNEL * GALMPSC_REG_GAP)); ++ temp &= 0xffffff00; ++ temp |= BIT29; ++ GT_REG_WRITE (GALMPSC_CHANNELREG_4 + (CHANNEL * GALMPSC_REG_GAP), ++ temp); ++ ++ /* Set the Valid bit 'V' (bit 12) and int generation bit 'INT' (bit 15) */ ++ temp = GTREGREAD (GALMPSC_CHANNELREG_5 + (CHANNEL * GALMPSC_REG_GAP)); ++ temp |= (BIT12 | BIT15); ++ GT_REG_WRITE (GALMPSC_CHANNELREG_5 + (CHANNEL * GALMPSC_REG_GAP), ++ temp); ++ ++ /* Set int mask */ ++ temp = GTREGREAD (GALMPSC_0_INT_MASK); ++ temp |= BIT6; ++ GT_REG_WRITE (GALMPSC_0_INT_MASK, temp); ++} ++#endif ++ ++char mpsc_getchar_debug (void) ++{ ++ volatile int temp; ++ volatile unsigned int cause; ++ ++ cause = GTREGREAD (GALMPSC_0_INT_CAUSE); ++ while ((cause & BIT6) == 0) { ++ cause = GTREGREAD (GALMPSC_0_INT_CAUSE); ++ } ++ ++ temp = GTREGREAD (GALMPSC_CHANNELREG_10 + ++ (CHANNEL * GALMPSC_REG_GAP)); ++ /* By writing 1's to the set bits, the register is cleared */ ++ GT_REG_WRITE (GALMPSC_CHANNELREG_10 + (CHANNEL * GALMPSC_REG_GAP), ++ temp); ++ GT_REG_WRITE (GALMPSC_0_INT_CAUSE, cause & ~BIT6); ++ return (temp >> 16) & 0xff; ++} ++ ++/* special function for running out of flash. doesn't modify any ++ * global variables [josh] */ ++int mpsc_putchar_early (char ch) ++{ ++ int mpsc = CHANNEL; ++ int temp = ++ GTREGREAD (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP)); ++ galmpsc_set_tcschar (mpsc, ch); ++ GT_REG_WRITE (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP), ++ temp | 0x200); ++ ++#define MAGIC_FACTOR (10*1000000) ++ ++ udelay (MAGIC_FACTOR / gd->baudrate); ++ return 0; ++} ++ ++/* This is used after relocation, see serial.c and mpsc_init2 */ ++static int mpsc_putchar_sdma (char ch) ++{ ++ volatile unsigned int *p; ++ unsigned int temp; ++ ++ ++ /* align the descriptor */ ++ p = tx_desc_base; ++ memset ((void *) p, 0, 8 * sizeof (unsigned int)); ++ ++ /* fill one 64 bit buffer */ ++ /* word swap, pad with 0 */ ++ p[4] = 0; /* x */ ++ p[5] = (unsigned int) ch; /* x */ ++ ++ /* CHANGED completely according to GT64260A dox - NTL */ ++ p[0] = 0x00010001; /* 0 */ ++ p[1] = DESC_OWNER_BIT | DESC_FIRST | DESC_LAST; /* 4 */ ++ p[2] = 0; /* 8 */ ++ p[3] = (unsigned int) &p[4]; /* c */ ++ ++#if 0 ++ p[9] = DESC_FIRST | DESC_LAST; ++ p[10] = (unsigned int) &p[0]; ++ p[11] = (unsigned int) &p[12]; ++#endif ++ ++ FLUSH_DCACHE (&p[0], &p[8]); ++ ++ GT_REG_WRITE (GALSDMA_0_CUR_TX_PTR + (CHANNEL * GALSDMA_REG_DIFF), ++ (unsigned int) &p[0]); ++ GT_REG_WRITE (GALSDMA_0_FIR_TX_PTR + (CHANNEL * GALSDMA_REG_DIFF), ++ (unsigned int) &p[0]); ++ ++ temp = GTREGREAD (GALSDMA_0_COM_REG + (CHANNEL * GALSDMA_REG_DIFF)); ++ temp |= (TX_DEMAND | TX_STOP); ++ GT_REG_WRITE (GALSDMA_0_COM_REG + (CHANNEL * GALSDMA_REG_DIFF), temp); ++ ++ INVALIDATE_DCACHE (&p[1], &p[2]); ++ ++ while (p[1] & DESC_OWNER_BIT) { ++ udelay (100); ++ INVALIDATE_DCACHE (&p[1], &p[2]); ++ } ++ return 0; ++} ++ ++char mpsc_getchar_sdma (void) ++{ ++ static unsigned int done = 0; ++ volatile char ch; ++ unsigned int len = 0, idx = 0, temp; ++ ++ volatile unsigned int *p; ++ ++ ++ do { ++ p = &rx_desc_base[rx_desc_index * 8]; ++ ++ INVALIDATE_DCACHE (&p[0], &p[1]); ++ /* Wait for character */ ++ while (p[1] & DESC_OWNER_BIT) { ++ udelay (100); ++ INVALIDATE_DCACHE (&p[0], &p[1]); ++ } ++ ++ /* Handle error case */ ++ if (p[1] & (1 << 15)) { ++ printf ("oops, error: %08x\n", p[1]); ++ ++ temp = GTREGREAD (GALMPSC_CHANNELREG_2 + ++ (CHANNEL * GALMPSC_REG_GAP)); ++ temp |= (1 << 23); ++ GT_REG_WRITE (GALMPSC_CHANNELREG_2 + ++ (CHANNEL * GALMPSC_REG_GAP), temp); ++ ++ /* Can't poll on abort bit, so we just wait. */ ++ udelay (100); ++ ++ galsdma_enable_rx (); ++ } ++ ++ /* Number of bytes left in this descriptor */ ++ len = p[0] & 0xffff; ++ ++ if (len) { ++ /* Where to look */ ++ idx = 5; ++ if (done > 3) ++ idx = 4; ++ if (done > 7) ++ idx = 7; ++ if (done > 11) ++ idx = 6; ++ ++ INVALIDATE_DCACHE (&p[idx], &p[idx + 1]); ++ ch = p[idx] & 0xff; ++ done++; ++ } ++ ++ if (done < len) { ++ /* this descriptor has more bytes still ++ * shift down the char we just read, and leave the ++ * buffer in place for the next time around ++ */ ++ p[idx] = p[idx] >> 8; ++ FLUSH_DCACHE (&p[idx], &p[idx + 1]); ++ } ++ ++ if (done == len) { ++ /* nothing left in this descriptor. ++ * go to next one ++ */ ++ p[1] = DESC_OWNER_BIT | DESC_FIRST | DESC_LAST; ++ p[0] = 0x00100000; ++ FLUSH_DCACHE (&p[0], &p[1]); ++ /* Next descriptor */ ++ rx_desc_index = (rx_desc_index + 1) % RX_DESC; ++ done = 0; ++ } ++ } while (len == 0); /* galileo bug.. len might be zero */ ++ ++ return ch; ++} ++ ++ ++int mpsc_test_char_debug (void) ++{ ++ if ((GTREGREAD (GALMPSC_0_INT_CAUSE) & BIT6) == 0) ++ return 0; ++ else { ++ return 1; ++ } ++} ++ ++ ++int mpsc_test_char_sdma (void) ++{ ++ volatile unsigned int *p = &rx_desc_base[rx_desc_index * 8]; ++ ++ INVALIDATE_DCACHE (&p[1], &p[2]); ++ ++ if (p[1] & DESC_OWNER_BIT) ++ return 0; ++ else ++ return 1; ++} ++ ++int mpsc_init (int baud) ++{ ++ /* BRG CONFIG */ ++ galbrg_set_baudrate (CHANNEL, baud); ++ galbrg_set_clksrc (CHANNEL, 8); /* set source=Tclk */ ++ galbrg_set_CUV (CHANNEL, 0); /* set up CountUpValue */ ++ galbrg_enable (CHANNEL); /* Enable BRG */ ++ ++ /* Set up clock routing */ ++ galmpsc_connect (CHANNEL, GALMPSC_CONNECT); /* connect it */ ++ ++ galmpsc_route_rx_clock (CHANNEL, CHANNEL); /* chosse BRG0 for Rx */ ++ galmpsc_route_tx_clock (CHANNEL, CHANNEL); /* chose BRG0 for Tx */ ++ ++ /* reset MPSC state */ ++ galmpsc_shutdown (CHANNEL); ++ ++ /* SDMA CONFIG */ ++ galsdma_set_burstsize (CHANNEL, L1_CACHE_BYTES / 8); /* in 64 bit words (8 bytes) */ ++ galsdma_set_txle (CHANNEL); ++ galsdma_set_rxle (CHANNEL); ++ galsdma_set_RC (CHANNEL, 0xf); ++ galsdma_set_SFM (CHANNEL); ++ galsdma_set_RFT (CHANNEL); ++ ++ /* MPSC CONFIG */ ++ galmpsc_write_config_regs (CHANNEL, GALMPSC_UART); ++ galmpsc_config_channel_regs (CHANNEL); ++ galmpsc_set_char_length (CHANNEL, GALMPSC_CHAR_LENGTH_8); /* 8 */ ++ galmpsc_set_parity (CHANNEL, GALMPSC_PARITY_NONE); /* N */ ++ galmpsc_set_stop_bit_length (CHANNEL, GALMPSC_STOP_BITS_1); /* 1 */ ++ ++#ifdef CONFIG_MPSC_DEBUG_PORT ++ mpsc_debug_init (); ++#endif ++ ++ /* COMM_MPSC CONFIG */ ++#ifdef SOFTWARE_CACHE_MANAGEMENT ++ galmpsc_set_snoop (CHANNEL, 0); /* disable snoop */ ++#else ++ galmpsc_set_snoop (CHANNEL, 1); /* enable snoop */ ++#endif ++ ++ return 0; ++} ++ ++ ++void mpsc_sdma_init (void) ++{ ++ /* Setup SDMA channel0 SDMA_CONFIG_REG*/ ++ GT_REG_WRITE (SDMA_CONFIG_REG (0), 0x000020ff); ++ ++ /* Enable MPSC-Window0 for DRAM Bank 0 */ ++ if (galsdma_set_mem_space (MV64460_CUNIT_BASE_ADDR_WIN_0_BIT, ++ MV64460_SDMA_DRAM_CS_0_TARGET, ++ 0, ++ memoryGetBankBaseAddress(0), ++ memoryGetBankSize(0)) != true) ++ printf ("%s: SDMA_Window0 memory setup failed !!! \n", ++ __FUNCTION__); ++ ++ ++ /* Enable MPSC-Window1 for DRAM Bank 1 */ ++ if (galsdma_set_mem_space (MV64460_CUNIT_BASE_ADDR_WIN_1_BIT, ++ MV64460_SDMA_DRAM_CS_1_TARGET, ++ 0, ++ memoryGetBankBaseAddress(1), ++ memoryGetBankSize(1)) != true) ++ printf ("%s: SDMA_Window1 memory setup failed !!! \n", ++ __FUNCTION__); ++ ++ ++ /* Disable MPSC-Window2 */ ++ if (galsdma_set_mem_space (MV64460_CUNIT_BASE_ADDR_WIN_2_BIT, ++ MV64460_SDMA_DRAM_CS_2_TARGET, ++ 0, ++ memoryGetBankBaseAddress(2), ++ memoryGetBankSize(2)) != true) ++ printf ("%s: SDMA_Window2 memory setup failed !!! \n", ++ __FUNCTION__); ++ ++ ++ /* Disable MPSC-Window3 */ ++ if (galsdma_set_mem_space (MV64460_CUNIT_BASE_ADDR_WIN_3_BIT, ++ MV64460_SDMA_DRAM_CS_3_TARGET, ++ 0, ++ memoryGetBankBaseAddress(3), ++ memoryGetBankSize(3)) != true) ++ printf ("%s: SDMA_Window3 memory setup failed !!! \n", ++ __FUNCTION__); ++ ++ /* Setup MPSC0 access mode Window0 full access */ ++ GT_SET_REG_BITS (MPSC0_ACCESS_PROTECTION_REG, ++ (MV64460_SDMA_WIN_ACCESS_FULL << ++ (MV64460_CUNIT_BASE_ADDR_WIN_0_BIT * 2))); ++ ++ /* Setup MPSC1 access mode Window1 full access */ ++ GT_SET_REG_BITS (MPSC1_ACCESS_PROTECTION_REG, ++ (MV64460_SDMA_WIN_ACCESS_FULL << ++ (MV64460_CUNIT_BASE_ADDR_WIN_0_BIT * 2))); ++ ++ /* Setup MPSC internal address space base address */ ++ GT_REG_WRITE (CUNIT_INTERNAL_SPACE_BASE_ADDR_REG, CFG_GT_REGS); ++ ++ /* no high address remap*/ ++ GT_REG_WRITE (CUNIT_HIGH_ADDR_REMAP_REG0, 0x00); ++ GT_REG_WRITE (CUNIT_HIGH_ADDR_REMAP_REG1, 0x00); ++ ++ /* clear interrupt cause register for MPSC (fault register)*/ ++ GT_REG_WRITE (CUNIT_INTERRUPT_CAUSE_REG, 0x00); ++} ++ ++ ++void mpsc_init2 (void) ++{ ++ int i; ++ ++#ifndef CONFIG_MPSC_DEBUG_PORT ++ mpsc_putchar = mpsc_putchar_sdma; ++ mpsc_getchar = mpsc_getchar_sdma; ++ mpsc_test_char = mpsc_test_char_sdma; ++#endif ++ /* RX descriptors */ ++ rx_desc_base = (unsigned int *) malloc (((RX_DESC + 1) * 8) * ++ sizeof (unsigned int)); ++ ++ /* align descriptors */ ++ rx_desc_base = (unsigned int *) ++ (((unsigned int) rx_desc_base + 32) & 0xFFFFFFF0); ++ ++ rx_desc_index = 0; ++ ++ memset ((void *) rx_desc_base, 0, ++ (RX_DESC * 8) * sizeof (unsigned int)); ++ ++ for (i = 0; i < RX_DESC; i++) { ++ rx_desc_base[i * 8 + 3] = (unsigned int) &rx_desc_base[i * 8 + 4]; /* Buffer */ ++ rx_desc_base[i * 8 + 2] = (unsigned int) &rx_desc_base[(i + 1) * 8]; /* Next descriptor */ ++ rx_desc_base[i * 8 + 1] = DESC_OWNER_BIT | DESC_FIRST | DESC_LAST; /* Command & control */ ++ rx_desc_base[i * 8] = 0x00100000; ++ } ++ rx_desc_base[(i - 1) * 8 + 2] = (unsigned int) &rx_desc_base[0]; ++ ++ FLUSH_DCACHE (&rx_desc_base[0], &rx_desc_base[RX_DESC * 8]); ++ GT_REG_WRITE (GALSDMA_0_CUR_RX_PTR + (CHANNEL * GALSDMA_REG_DIFF), ++ (unsigned int) &rx_desc_base[0]); ++ ++ /* TX descriptors */ ++ tx_desc_base = (unsigned int *) malloc (((TX_DESC + 1) * 8) * ++ sizeof (unsigned int)); ++ ++ /* align descriptors */ ++ tx_desc_base = (unsigned int *) ++ (((unsigned int) tx_desc_base + 32) & 0xFFFFFFF0); ++ ++ tx_desc_index = -1; ++ ++ memset ((void *) tx_desc_base, 0, ++ (TX_DESC * 8) * sizeof (unsigned int)); ++ ++ for (i = 0; i < TX_DESC; i++) { ++ tx_desc_base[i * 8 + 5] = (unsigned int) 0x23232323; ++ tx_desc_base[i * 8 + 4] = (unsigned int) 0x23232323; ++ tx_desc_base[i * 8 + 3] = ++ (unsigned int) &tx_desc_base[i * 8 + 4]; ++ tx_desc_base[i * 8 + 2] = ++ (unsigned int) &tx_desc_base[(i + 1) * 8]; ++ tx_desc_base[i * 8 + 1] = ++ DESC_OWNER_BIT | DESC_FIRST | DESC_LAST; ++ ++ /* set sbytecnt and shadow byte cnt to 1 */ ++ tx_desc_base[i * 8] = 0x00010001; ++ } ++ tx_desc_base[(i - 1) * 8 + 2] = (unsigned int) &tx_desc_base[0]; ++ ++ FLUSH_DCACHE (&tx_desc_base[0], &tx_desc_base[TX_DESC * 8]); ++ ++ udelay (100); ++ ++ galsdma_enable_rx (); ++ ++ return; ++} ++ ++int galbrg_set_baudrate (int channel, int rate) ++{ ++ int clock; ++ ++ galbrg_disable (channel); /*ok */ ++ ++#ifdef ZUMA_NTL ++ /* from tclk */ ++ clock = (CFG_TCLK / (16 * rate)) - 1; ++#else ++ clock = (CFG_TCLK / (16 * rate)) - 1; ++#endif ++ ++ galbrg_set_CDV (channel, clock); /* set timer Reg. for BRG */ ++ ++ galbrg_enable (channel); ++ ++ gd->baudrate = rate; ++ ++ return 0; ++} ++ ++/* ------------------------------------------------------------------ */ ++ ++/* Below are all the private functions that no one else needs */ ++ ++static int galbrg_set_CDV (int channel, int value) ++{ ++ unsigned int temp; ++ ++ temp = GTREGREAD (GALBRG_0_CONFREG + (channel * GALBRG_REG_GAP)); ++ temp &= 0xFFFF0000; ++ temp |= (value & 0x0000FFFF); ++ GT_REG_WRITE (GALBRG_0_CONFREG + (channel * GALBRG_REG_GAP), temp); ++ ++ return 0; ++} ++ ++static int galbrg_enable (int channel) ++{ ++ unsigned int temp; ++ ++ temp = GTREGREAD (GALBRG_0_CONFREG + (channel * GALBRG_REG_GAP)); ++ temp |= 0x00010000; ++ GT_REG_WRITE (GALBRG_0_CONFREG + (channel * GALBRG_REG_GAP), temp); ++ ++ return 0; ++} ++ ++static int galbrg_disable (int channel) ++{ ++ unsigned int temp; ++ ++ temp = GTREGREAD (GALBRG_0_CONFREG + (channel * GALBRG_REG_GAP)); ++ temp &= 0xFFFEFFFF; ++ GT_REG_WRITE (GALBRG_0_CONFREG + (channel * GALBRG_REG_GAP), temp); ++ ++ return 0; ++} ++ ++static int galbrg_set_clksrc (int channel, int value) ++{ ++ unsigned int temp; ++ ++ temp = GTREGREAD (GALBRG_0_CONFREG + (channel * GALBRG_REG_GAP)); ++ temp &= 0xFFC3FFFF; /* Bit 18 - 21 (MV 64260 18-22) */ ++ temp |= (value << 18); ++ GT_REG_WRITE (GALBRG_0_CONFREG + (channel * GALBRG_REG_GAP), temp); ++ return 0; ++} ++ ++static int galbrg_set_CUV (int channel, int value) ++{ ++ /* set CountUpValue */ ++ GT_REG_WRITE (GALBRG_0_BTREG + (channel * GALBRG_REG_GAP), value); ++ ++ return 0; ++} ++ ++#if 0 ++static int galbrg_reset (int channel) ++{ ++ unsigned int temp; ++ ++ temp = GTREGREAD (GALBRG_0_CONFREG + (channel * GALBRG_REG_GAP)); ++ temp |= 0x20000; ++ GT_REG_WRITE (GALBRG_0_CONFREG + (channel * GALBRG_REG_GAP), temp); ++ ++ return 0; ++} ++#endif ++ ++static int galsdma_set_RFT (int channel) ++{ ++ unsigned int temp; ++ ++ temp = GTREGREAD (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF)); ++ temp |= 0x00000001; ++ GT_REG_WRITE (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF), ++ temp); ++ ++ return 0; ++} ++ ++static int galsdma_set_SFM (int channel) ++{ ++ unsigned int temp; ++ ++ temp = GTREGREAD (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF)); ++ temp |= 0x00000002; ++ GT_REG_WRITE (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF), ++ temp); ++ ++ return 0; ++} ++ ++static int galsdma_set_rxle (int channel) ++{ ++ unsigned int temp; ++ ++ temp = GTREGREAD (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF)); ++ temp |= 0x00000040; ++ GT_REG_WRITE (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF), ++ temp); ++ ++ return 0; ++} ++ ++static int galsdma_set_txle (int channel) ++{ ++ unsigned int temp; ++ ++ temp = GTREGREAD (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF)); ++ temp |= 0x00000080; ++ GT_REG_WRITE (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF), ++ temp); ++ ++ return 0; ++} ++ ++static int galsdma_set_RC (int channel, unsigned int value) ++{ ++ unsigned int temp; ++ ++ temp = GTREGREAD (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF)); ++ temp &= ~0x0000003c; ++ temp |= (value << 2); ++ GT_REG_WRITE (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF), ++ temp); ++ ++ return 0; ++} ++ ++static int galsdma_set_burstsize (int channel, unsigned int value) ++{ ++ unsigned int temp; ++ ++ temp = GTREGREAD (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF)); ++ temp &= 0xFFFFCFFF; ++ switch (value) { ++ case 8: ++ GT_REG_WRITE (GALSDMA_0_CONF_REG + ++ (channel * GALSDMA_REG_DIFF), ++ (temp | (0x3 << 12))); ++ break; ++ ++ case 4: ++ GT_REG_WRITE (GALSDMA_0_CONF_REG + ++ (channel * GALSDMA_REG_DIFF), ++ (temp | (0x2 << 12))); ++ break; ++ ++ case 2: ++ GT_REG_WRITE (GALSDMA_0_CONF_REG + ++ (channel * GALSDMA_REG_DIFF), ++ (temp | (0x1 << 12))); ++ break; ++ ++ case 1: ++ GT_REG_WRITE (GALSDMA_0_CONF_REG + ++ (channel * GALSDMA_REG_DIFF), ++ (temp | (0x0 << 12))); ++ break; ++ ++ default: ++ return -1; ++ break; ++ } ++ ++ return 0; ++} ++ ++static int galmpsc_connect (int channel, int connect) ++{ ++ unsigned int temp; ++ ++ temp = GTREGREAD (GALMPSC_ROUTING_REGISTER); ++ ++ if ((channel == 0) && connect) ++ temp &= ~0x00000007; ++ else if ((channel == 1) && connect) ++ temp &= ~(0x00000007 << 6); ++ else if ((channel == 0) && !connect) ++ temp |= 0x00000007; ++ else ++ temp |= (0x00000007 << 6); ++ ++ /* Just in case... */ ++ temp &= 0x3fffffff; ++ ++ GT_REG_WRITE (GALMPSC_ROUTING_REGISTER, temp); ++ ++ return 0; ++} ++ ++static int galmpsc_route_rx_clock (int channel, int brg) ++{ ++ unsigned int temp; ++ ++ temp = GTREGREAD (GALMPSC_RxC_ROUTE); ++ ++ if (channel == 0) { ++ temp &= ~0x0000000F; ++ temp |= brg; ++ } else { ++ temp &= ~0x00000F00; ++ temp |= (brg << 8); ++ } ++ ++ GT_REG_WRITE (GALMPSC_RxC_ROUTE, temp); ++ ++ return 0; ++} ++ ++static int galmpsc_route_tx_clock (int channel, int brg) ++{ ++ unsigned int temp; ++ ++ temp = GTREGREAD (GALMPSC_TxC_ROUTE); ++ ++ if (channel == 0) { ++ temp &= ~0x0000000F; ++ temp |= brg; ++ } else { ++ temp &= ~0x00000F00; ++ temp |= (brg << 8); ++ } ++ ++ GT_REG_WRITE (GALMPSC_TxC_ROUTE, temp); ++ ++ return 0; ++} ++ ++static int galmpsc_write_config_regs (int mpsc, int mode) ++{ ++ if (mode == GALMPSC_UART) { ++ /* Main config reg Low (Null modem, Enable Tx/Rx, UART mode) */ ++ GT_REG_WRITE (GALMPSC_MCONF_LOW + (mpsc * GALMPSC_REG_GAP), ++ 0x000004c4); ++ ++ /* Main config reg High (32x Rx/Tx clock mode, width=8bits */ ++ GT_REG_WRITE (GALMPSC_MCONF_HIGH + (mpsc * GALMPSC_REG_GAP), ++ 0x024003f8); ++ /* 22 2222 1111 */ ++ /* 54 3210 9876 */ ++ /* 0000 0010 0000 0000 */ ++ /* 1 */ ++ /* 098 7654 3210 */ ++ /* 0000 0011 1111 1000 */ ++ } else ++ return -1; ++ ++ return 0; ++} ++ ++static int galmpsc_config_channel_regs (int mpsc) ++{ ++ GT_REG_WRITE (GALMPSC_CHANNELREG_1 + (mpsc * GALMPSC_REG_GAP), 0); ++ GT_REG_WRITE (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP), 0); ++ GT_REG_WRITE (GALMPSC_CHANNELREG_3 + (mpsc * GALMPSC_REG_GAP), 1); ++ GT_REG_WRITE (GALMPSC_CHANNELREG_4 + (mpsc * GALMPSC_REG_GAP), 0); ++ GT_REG_WRITE (GALMPSC_CHANNELREG_5 + (mpsc * GALMPSC_REG_GAP), 0); ++ GT_REG_WRITE (GALMPSC_CHANNELREG_6 + (mpsc * GALMPSC_REG_GAP), 0); ++ GT_REG_WRITE (GALMPSC_CHANNELREG_7 + (mpsc * GALMPSC_REG_GAP), 0); ++ GT_REG_WRITE (GALMPSC_CHANNELREG_8 + (mpsc * GALMPSC_REG_GAP), 0); ++ GT_REG_WRITE (GALMPSC_CHANNELREG_9 + (mpsc * GALMPSC_REG_GAP), 0); ++ GT_REG_WRITE (GALMPSC_CHANNELREG_10 + (mpsc * GALMPSC_REG_GAP), 0); ++ ++ galmpsc_set_brkcnt (mpsc, 0x3); ++ galmpsc_set_tcschar (mpsc, 0xab); ++ ++ return 0; ++} ++ ++static int galmpsc_set_brkcnt (int mpsc, int value) ++{ ++ unsigned int temp; ++ ++ temp = GTREGREAD (GALMPSC_CHANNELREG_1 + (mpsc * GALMPSC_REG_GAP)); ++ temp &= 0x0000FFFF; ++ temp |= (value << 16); ++ GT_REG_WRITE (GALMPSC_CHANNELREG_1 + (mpsc * GALMPSC_REG_GAP), temp); ++ ++ return 0; ++} ++ ++static int galmpsc_set_tcschar (int mpsc, int value) ++{ ++ unsigned int temp; ++ ++ temp = GTREGREAD (GALMPSC_CHANNELREG_1 + (mpsc * GALMPSC_REG_GAP)); ++ temp &= 0xFFFF0000; ++ temp |= value; ++ GT_REG_WRITE (GALMPSC_CHANNELREG_1 + (mpsc * GALMPSC_REG_GAP), temp); ++ ++ return 0; ++} ++ ++static int galmpsc_set_char_length (int mpsc, int value) ++{ ++ unsigned int temp; ++ ++ temp = GTREGREAD (GALMPSC_PROTOCONF_REG + (mpsc * GALMPSC_REG_GAP)); ++ temp &= 0xFFFFCFFF; ++ temp |= (value << 12); ++ GT_REG_WRITE (GALMPSC_PROTOCONF_REG + (mpsc * GALMPSC_REG_GAP), temp); ++ ++ return 0; ++} ++ ++static int galmpsc_set_stop_bit_length (int mpsc, int value) ++{ ++ unsigned int temp; ++ ++ temp = GTREGREAD (GALMPSC_PROTOCONF_REG + (mpsc * GALMPSC_REG_GAP)); ++ temp &= 0xFFFFBFFF; ++ temp |= (value << 14); ++ GT_REG_WRITE (GALMPSC_PROTOCONF_REG + (mpsc * GALMPSC_REG_GAP), temp); ++ ++ return 0; ++} ++ ++static int galmpsc_set_parity (int mpsc, int value) ++{ ++ unsigned int temp; ++ ++ temp = GTREGREAD (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP)); ++ if (value != -1) { ++ temp &= 0xFFF3FFF3; ++ temp |= ((value << 18) | (value << 2)); ++ temp |= ((value << 17) | (value << 1)); ++ } else { ++ temp &= 0xFFF1FFF1; ++ } ++ ++ GT_REG_WRITE (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP), temp); ++ ++ return 0; ++} ++ ++static int galmpsc_enter_hunt (int mpsc) ++{ ++ int temp; ++ ++ temp = GTREGREAD (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP)); ++ temp |= 0x80000000; ++ GT_REG_WRITE (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP), temp); ++ ++ while (GTREGREAD (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP)) & ++ MPSC_ENTER_HUNT) { ++ udelay (1); ++ } ++ return 0; ++} ++ ++ ++static int galmpsc_shutdown (int mpsc) ++{ ++ unsigned int temp; ++ ++ /* cause RX abort (clears RX) */ ++ temp = GTREGREAD (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP)); ++ temp |= MPSC_RX_ABORT | MPSC_TX_ABORT; ++ temp &= ~MPSC_ENTER_HUNT; ++ GT_REG_WRITE (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP), temp); ++ ++ GT_REG_WRITE (GALSDMA_0_COM_REG, 0); ++ GT_REG_WRITE (GALSDMA_0_COM_REG, SDMA_TX_ABORT | SDMA_RX_ABORT); ++ ++ /* shut down the MPSC */ ++ GT_REG_WRITE (GALMPSC_MCONF_LOW, 0); ++ GT_REG_WRITE (GALMPSC_MCONF_HIGH, 0); ++ GT_REG_WRITE (GALMPSC_PROTOCONF_REG + (mpsc * GALMPSC_REG_GAP), 0); ++ ++ udelay (100); ++ ++ /* shut down the sdma engines. */ ++ /* reset config to default */ ++ GT_REG_WRITE (GALSDMA_0_CONF_REG, 0x000000fc); ++ ++ udelay (100); ++ ++ /* clear the SDMA current and first TX and RX pointers */ ++ GT_REG_WRITE (GALSDMA_0_CUR_RX_PTR, 0); ++ GT_REG_WRITE (GALSDMA_0_CUR_TX_PTR, 0); ++ GT_REG_WRITE (GALSDMA_0_FIR_TX_PTR, 0); ++ ++ udelay (100); ++ ++ return 0; ++} ++ ++static void galsdma_enable_rx (void) ++{ ++ int temp; ++ ++ /* Enable RX processing */ ++ temp = GTREGREAD (GALSDMA_0_COM_REG + (CHANNEL * GALSDMA_REG_DIFF)); ++ temp |= RX_ENABLE; ++ GT_REG_WRITE (GALSDMA_0_COM_REG + (CHANNEL * GALSDMA_REG_DIFF), temp); ++ ++ galmpsc_enter_hunt (CHANNEL); ++} ++ ++static int galmpsc_set_snoop (int mpsc, int value) ++{ ++ int reg = ++ mpsc ? MPSC_1_ADDRESS_CONTROL_LOW : ++ MPSC_0_ADDRESS_CONTROL_LOW; ++ int temp = GTREGREAD (reg); ++ ++ if (value) ++ temp |= (1 << 6) | (1 << 14) | (1 << 22) | (1 << 30); ++ else ++ temp &= ~((1 << 6) | (1 << 14) | (1 << 22) | (1 << 30)); ++ GT_REG_WRITE (reg, temp); ++ return 0; ++} ++ ++/******************************************************************************* ++* galsdma_set_mem_space - Set MV64460 IDMA memory decoding map. ++* ++* DESCRIPTION: ++* the MV64460 SDMA has its own address decoding map that is de-coupled ++* from the CPU interface address decoding windows. The SDMA channels ++* share four address windows. Each region can be individually configured ++* by this function by associating it to a target interface and setting ++* base and size values. ++* ++* NOTE!!! ++* The size must be in 64Kbyte granularity. ++* The base address must be aligned to the size. ++* The size must be a series of 1s followed by a series of zeros ++* ++* OUTPUT: ++* None. ++* ++* RETURN: ++* True for success, false otherwise. ++* ++*******************************************************************************/ ++ ++static int galsdma_set_mem_space (unsigned int memSpace, ++ unsigned int memSpaceTarget, ++ unsigned int memSpaceAttr, ++ unsigned int baseAddress, unsigned int size) ++{ ++ unsigned int temp; ++ ++ if (size == 0) { ++ GT_RESET_REG_BITS (MV64460_CUNIT_BASE_ADDR_ENABLE_REG, ++ 1 << memSpace); ++ return true; ++ } ++ ++ /* The base address must be aligned to the size. */ ++ if (baseAddress % size != 0) { ++ return false; ++ } ++ if (size < 0x10000) { ++ return false; ++ } ++ ++ /* Align size and base to 64K */ ++ baseAddress &= 0xffff0000; ++ size &= 0xffff0000; ++ temp = size >> 16; ++ ++ /* Checking that the size is a sequence of '1' followed by a ++ sequence of '0' starting from LSB to MSB. */ ++ while ((temp > 0) && (temp & 0x1)) { ++ temp = temp >> 1; ++ } ++ ++ if (temp != 0) { ++ GT_REG_WRITE (MV64460_CUNIT_BASE_ADDR_REG0 + memSpace * 8, ++ (baseAddress | memSpaceTarget | memSpaceAttr)); ++ GT_REG_WRITE ((MV64460_CUNIT_SIZE0 + memSpace * 8), ++ (size - 1) & 0xffff0000); ++ GT_RESET_REG_BITS (MV64460_CUNIT_BASE_ADDR_ENABLE_REG, ++ 1 << memSpace); ++ } else { ++ /* An invalid size was specified */ ++ return false; ++ } ++ return true; ++} +diff -Naupr u-boot-1.1.6/board/prodrive/p3mx/mpsc.h u-boot-1.1.6-fsl-1/board/prodrive/p3mx/mpsc.h +--- u-boot-1.1.6/board/prodrive/p3mx/mpsc.h 1969-12-31 18:00:00.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/board/prodrive/p3mx/mpsc.h 2006-12-06 10:33:49.000000000 -0600 +@@ -0,0 +1,156 @@ ++/* ++ * (C) Copyright 2001 ++ * John Clemens <clemens@mclx.com>, Mission Critical Linux, Inc. ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++/************************************************************************* ++ * changes for Marvell DB64360 eval board 2003 by Ingo Assmus <ingo.assmus@keymile.com> ++ * ++ ************************************************************************/ ++ ++ ++/* ++ * mpsc.h - header file for MPSC in uart mode (console driver) ++ */ ++ ++#ifndef __MPSC_H__ ++#define __MPSC_H__ ++ ++/* include actual Galileo defines */ ++#include "../../Marvell/include/mv_gen_reg.h" ++ ++/* driver related defines */ ++ ++int mpsc_init(int baud); ++void mpsc_sdma_init(void); ++void mpsc_init2(void); ++int galbrg_set_baudrate(int channel, int rate); ++ ++int mpsc_putchar_early(char ch); ++char mpsc_getchar_debug(void); ++int mpsc_test_char_debug(void); ++ ++int mpsc_test_char_sdma(void); ++ ++extern int (*mpsc_putchar)(char ch); ++extern char (*mpsc_getchar)(void); ++extern int (*mpsc_test_char)(void); ++ ++#define CHANNEL CONFIG_MPSC_PORT ++ ++#define TX_DESC 5 ++#define RX_DESC 20 ++ ++#define DESC_FIRST 0x00010000 ++#define DESC_LAST 0x00020000 ++#define DESC_OWNER_BIT 0x80000000 ++ ++#define TX_DEMAND 0x00800000 ++#define TX_STOP 0x00010000 ++#define RX_ENABLE 0x00000080 ++ ++#define SDMA_RX_ABORT (1 << 15) ++#define SDMA_TX_ABORT (1 << 31) ++#define MPSC_TX_ABORT (1 << 7) ++#define MPSC_RX_ABORT (1 << 23) ++#define MPSC_ENTER_HUNT (1 << 31) ++ ++/* MPSC defines */ ++ ++#define GALMPSC_CONNECT 0x1 ++#define GALMPSC_DISCONNECT 0x0 ++ ++#define GALMPSC_UART 0x1 ++ ++#define GALMPSC_STOP_BITS_1 0x0 ++#define GALMPSC_STOP_BITS_2 0x1 ++#define GALMPSC_CHAR_LENGTH_8 0x3 ++#define GALMPSC_CHAR_LENGTH_7 0x2 ++ ++#define GALMPSC_PARITY_ODD 0x0 ++#define GALMPSC_PARITY_EVEN 0x2 ++#define GALMPSC_PARITY_MARK 0x3 ++#define GALMPSC_PARITY_SPACE 0x1 ++#define GALMPSC_PARITY_NONE -1 ++ ++#define GALMPSC_SERIAL_MULTIPLEX SERIAL_PORT_MULTIPLEX /* 0xf010 */ ++#define GALMPSC_ROUTING_REGISTER MAIN_ROUTING_REGISTER /* 0xb400 */ ++#define GALMPSC_RxC_ROUTE RECEIVE_CLOCK_ROUTING_REGISTER /* 0xb404 */ ++#define GALMPSC_TxC_ROUTE TRANSMIT_CLOCK_ROUTING_REGISTER /* 0xb408 */ ++#define GALMPSC_MCONF_LOW MPSC0_MAIN_CONFIGURATION_LOW /* 0x8000 */ ++#define GALMPSC_MCONF_HIGH MPSC0_MAIN_CONFIGURATION_HIGH /* 0x8004 */ ++#define GALMPSC_PROTOCONF_REG MPSC0_PROTOCOL_CONFIGURATION /* 0x8008 */ ++ ++#define GALMPSC_REG_GAP 0x1000 ++ ++#define GALMPSC_MCONF_CHREG_BASE CHANNEL0_REGISTER1 /* 0x800c */ ++#define GALMPSC_CHANNELREG_1 CHANNEL0_REGISTER1 /* 0x800c */ ++#define GALMPSC_CHANNELREG_2 CHANNEL0_REGISTER2 /* 0x8010 */ ++#define GALMPSC_CHANNELREG_3 CHANNEL0_REGISTER3 /* 0x8014 */ ++#define GALMPSC_CHANNELREG_4 CHANNEL0_REGISTER4 /* 0x8018 */ ++#define GALMPSC_CHANNELREG_5 CHANNEL0_REGISTER5 /* 0x801c */ ++#define GALMPSC_CHANNELREG_6 CHANNEL0_REGISTER6 /* 0x8020 */ ++#define GALMPSC_CHANNELREG_7 CHANNEL0_REGISTER7 /* 0x8024 */ ++#define GALMPSC_CHANNELREG_8 CHANNEL0_REGISTER8 /* 0x8028 */ ++#define GALMPSC_CHANNELREG_9 CHANNEL0_REGISTER9 /* 0x802c */ ++#define GALMPSC_CHANNELREG_10 CHANNEL0_REGISTER10 /* 0x8030 */ ++#define GALMPSC_CHANNELREG_11 CHANNEL0_REGISTER11 /* 0x8034 */ ++ ++#define GALSDMA_COMMAND_FIRST (1 << 16) ++#define GALSDMA_COMMAND_LAST (1 << 17) ++#define GALSDMA_COMMAND_ENABLEINT (1 << 23) ++#define GALSDMA_COMMAND_AUTO (1 << 30) ++#define GALSDMA_COMMAND_OWNER (1 << 31) ++ ++#define GALSDMA_RX 0 ++#define GALSDMA_TX 1 ++ ++/* CHANNEL2 should be CHANNEL1, according to documentation, ++ * but to work with the current GTREGS file... ++ */ ++#define GALSDMA_0_CONF_REG CHANNEL0_CONFIGURATION_REGISTER /* 0x4000 */ ++#define GALSDMA_1_CONF_REG CHANNEL2_CONFIGURATION_REGISTER /* 0x6000 */ ++#define GALSDMA_0_COM_REG CHANNEL0_COMMAND_REGISTER /* 0x4008 */ ++#define GALSDMA_1_COM_REG CHANNEL2_COMMAND_REGISTER /* 0x6008 */ ++#define GALSDMA_0_CUR_RX_PTR CHANNEL0_CURRENT_RX_DESCRIPTOR_POINTER /* 0x4810 */ ++#define GALSDMA_0_CUR_TX_PTR CHANNEL0_CURRENT_TX_DESCRIPTOR_POINTER /* 0x4c10 */ ++#define GALSDMA_0_FIR_TX_PTR CHANNEL0_FIRST_TX_DESCRIPTOR_POINTER /* 0x4c14 */ ++#define GALSDMA_1_CUR_RX_PTR CHANNEL2_CURRENT_RX_DESCRIPTOR_POINTER /* 0x6810 */ ++#define GALSDMA_1_CUR_TX_PTR CHANNEL2_CURRENT_TX_DESCRIPTOR_POINTER /* 0x6c10 */ ++#define GALSDMA_1_FIR_TX_PTR CHANNEL2_FIRST_TX_DESCRIPTOR_POINTER /* 0x6c14 */ ++#define GALSDMA_REG_DIFF 0x2000 ++ ++/* WRONG in gt64260R.h */ ++#define GALSDMA_INT_CAUSE 0xb800 /* SDMA_CAUSE */ ++#define GALSDMA_INT_MASK 0xb880 /* SDMA_MASK */ ++#define GALMPSC_0_INT_CAUSE 0xb804 ++#define GALMPSC_0_INT_MASK 0xb884 ++ ++#define GALSDMA_MODE_UART 0 ++#define GALSDMA_MODE_BISYNC 1 ++#define GALSDMA_MODE_HDLC 2 ++#define GALSDMA_MODE_TRANSPARENT 3 ++ ++#define GALBRG_0_CONFREG BRG0_CONFIGURATION_REGISTER /* 0xb200 */ ++#define GALBRG_REG_GAP 0x0008 ++#define GALBRG_0_BTREG BRG0_BAUDE_TUNING_REGISTER /* 0xb204 */ ++ ++#endif /* __MPSC_H__ */ +diff -Naupr u-boot-1.1.6/board/prodrive/p3mx/mv_eth.c u-boot-1.1.6-fsl-1/board/prodrive/p3mx/mv_eth.c +--- u-boot-1.1.6/board/prodrive/p3mx/mv_eth.c 1969-12-31 18:00:00.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/board/prodrive/p3mx/mv_eth.c 2006-12-06 10:33:49.000000000 -0600 +@@ -0,0 +1,3344 @@ ++/* ++ * (C) Copyright 2003 ++ * Ingo Assmus <ingo.assmus@keymile.com> ++ * ++ * based on - Driver for MV64460X ethernet ports ++ * Copyright (C) 2002 rabeeh@galileo.co.il ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ 3 the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++/* ++ * mv_eth.c - header file for the polled mode GT ethernet driver ++ */ ++#include <common.h> ++#include <net.h> ++#include <malloc.h> ++#include <miiphy.h> ++ ++#include "mv_eth.h" ++ ++/* enable Debug outputs */ ++ ++#undef DEBUG_MV_ETH ++ ++#ifdef DEBUG_MV_ETH ++#define DEBUG ++#define DP(x) x ++#else ++#define DP(x) ++#endif ++ ++/* PHY DFCDL Registers */ ++#define ETH_PHY_DFCDL_CONFIG0_REG 0x2100 ++#define ETH_PHY_DFCDL_CONFIG1_REG 0x2104 ++#define ETH_PHY_DFCDL_ADDR_REG 0x2110 ++#define ETH_PHY_DFCDL_DATA0_REG 0x2114 ++ ++#define PHY_AUTONEGOTIATE_TIMEOUT 4000 /* 4000 ms autonegotiate timeout */ ++#define PHY_UPDATE_TIMEOUT 10000 ++ ++#undef MV64460_CHECKSUM_OFFLOAD ++/************************************************************************* ++* The first part is the high level driver of the gigE ethernet ports. * ++*************************************************************************/ ++ ++/* Definition for configuring driver */ ++/* #define UPDATE_STATS_BY_SOFTWARE */ ++#undef MV64460_RX_QUEUE_FILL_ON_TASK ++ ++/* Constants */ ++#define MAGIC_ETH_RUNNING 8031971 ++#define MV64460_INTERNAL_SRAM_SIZE _256K ++#define EXTRA_BYTES 32 ++#define WRAP ETH_HLEN + 2 + 4 + 16 ++#define BUFFER_MTU dev->mtu + WRAP ++#define INT_CAUSE_UNMASK_ALL 0x0007ffff ++#define INT_CAUSE_UNMASK_ALL_EXT 0x0011ffff ++#ifdef MV64460_RX_FILL_ON_TASK ++#define INT_CAUSE_MASK_ALL 0x00000000 ++#define INT_CAUSE_CHECK_BITS INT_CAUSE_UNMASK_ALL ++#define INT_CAUSE_CHECK_BITS_EXT INT_CAUSE_UNMASK_ALL_EXT ++#endif ++ ++/* Read/Write to/from MV64460 internal registers */ ++#define MV_REG_READ(offset) my_le32_to_cpu(* (volatile unsigned int *) (INTERNAL_REG_BASE_ADDR + offset)) ++#define MV_REG_WRITE(offset,data) *(volatile unsigned int *) (INTERNAL_REG_BASE_ADDR + offset) = my_cpu_to_le32 (data) ++#define MV_SET_REG_BITS(regOffset,bits) ((*((volatile unsigned int*)((INTERNAL_REG_BASE_ADDR) + (regOffset)))) |= ((unsigned int)my_cpu_to_le32(bits))) ++#define MV_RESET_REG_BITS(regOffset,bits) ((*((volatile unsigned int*)((INTERNAL_REG_BASE_ADDR) + (regOffset)))) &= ~((unsigned int)my_cpu_to_le32(bits))) ++ ++#define my_cpu_to_le32(x) my_le32_to_cpu((x)) ++ ++/* Static function declarations */ ++static int mv64460_eth_real_open (struct eth_device *eth); ++static int mv64460_eth_real_stop (struct eth_device *eth); ++static struct net_device_stats *mv64460_eth_get_stats (struct eth_device ++ *dev); ++static void eth_port_init_mac_tables (ETH_PORT eth_port_num); ++static void mv64460_eth_update_stat (struct eth_device *dev); ++bool db64460_eth_start (struct eth_device *eth); ++unsigned int eth_read_mib_counter (ETH_PORT eth_port_num, ++ unsigned int mib_offset); ++int mv64460_eth_receive (struct eth_device *dev); ++ ++int mv64460_eth_xmit (struct eth_device *, volatile void *packet, int length); ++ ++int mv_miiphy_read(char *devname, unsigned char phy_addr, ++ unsigned char phy_reg, unsigned short *value); ++int mv_miiphy_write(char *devname, unsigned char phy_addr, ++ unsigned char phy_reg, unsigned short value); ++ ++int phy_setup_aneg (char *devname, unsigned char addr); ++ ++#ifndef UPDATE_STATS_BY_SOFTWARE ++static void mv64460_eth_print_stat (struct eth_device *dev); ++#endif ++/* Processes a received packet */ ++extern void NetReceive (volatile uchar *, int); ++ ++extern unsigned int INTERNAL_REG_BASE_ADDR; ++ ++unsigned long my_le32_to_cpu (unsigned long x) ++{ ++ return (((x & 0x000000ffU) << 24) | ++ ((x & 0x0000ff00U) << 8) | ++ ((x & 0x00ff0000U) >> 8) | ((x & 0xff000000U) >> 24)); ++} ++ ++/************************************************* ++ *Helper functions - used inside the driver only * ++ *************************************************/ ++#ifdef DEBUG_MV_ETH ++void print_globals (struct eth_device *dev) ++{ ++ printf ("Ethernet PRINT_Globals-Debug function\n"); ++ printf ("Base Address for ETH_PORT_INFO: %08x\n", ++ (unsigned int) dev->priv); ++ printf ("Base Address for mv64460_eth_priv: %08x\n", ++ (unsigned int) &(((ETH_PORT_INFO *) dev->priv)-> ++ port_private)); ++ ++ printf ("GT Internal Base Address: %08x\n", ++ INTERNAL_REG_BASE_ADDR); ++ printf ("Base Address for TX-DESCs: %08x Number of allocated Buffers %d\n", ++ (unsigned int) ((ETH_PORT_INFO *) dev->priv)->p_tx_desc_area_base[0], MV64460_TX_QUEUE_SIZE); ++ printf ("Base Address for RX-DESCs: %08x Number of allocated Buffers %d\n", ++ (unsigned int) ((ETH_PORT_INFO *) dev->priv)->p_rx_desc_area_base[0], MV64460_RX_QUEUE_SIZE); ++ printf ("Base Address for RX-Buffer: %08x allocated Bytes %d\n", ++ (unsigned int) ((ETH_PORT_INFO *) dev->priv)-> ++ p_rx_buffer_base[0], ++ (MV64460_RX_QUEUE_SIZE * MV64460_RX_BUFFER_SIZE) + 32); ++ printf ("Base Address for TX-Buffer: %08x allocated Bytes %d\n", ++ (unsigned int) ((ETH_PORT_INFO *) dev->priv)-> ++ p_tx_buffer_base[0], ++ (MV64460_TX_QUEUE_SIZE * MV64460_TX_BUFFER_SIZE) + 32); ++} ++#endif ++ ++/********************************************************************** ++ * mv64460_eth_print_phy_status ++ * ++ * Prints gigabit ethenret phy status ++ * ++ * Input : pointer to ethernet interface network device structure ++ * Output : N/A ++ **********************************************************************/ ++void mv64460_eth_print_phy_status (struct eth_device *dev) ++{ ++ struct mv64460_eth_priv *port_private; ++ unsigned int port_num; ++ ETH_PORT_INFO *ethernet_private = (ETH_PORT_INFO *) dev->priv; ++ unsigned int port_status, phy_reg_data; ++ ++ port_private = ++ (struct mv64460_eth_priv *) ethernet_private->port_private; ++ port_num = port_private->port_num; ++ ++ /* Check Link status on phy */ ++ eth_port_read_smi_reg (port_num, 1, &phy_reg_data); ++ if (!(phy_reg_data & 0x20)) { ++ printf ("Ethernet port changed link status to DOWN\n"); ++ } else { ++ port_status = ++ MV_REG_READ (MV64460_ETH_PORT_STATUS_REG (port_num)); ++ printf ("Ethernet status port %d: Link up", port_num); ++ printf (", %s", ++ (port_status & BIT2) ? "Full Duplex" : "Half Duplex"); ++ if (port_status & BIT4) ++ printf (", Speed 1 Gbps"); ++ else ++ printf (", %s", ++ (port_status & BIT5) ? "Speed 100 Mbps" : ++ "Speed 10 Mbps"); ++ printf ("\n"); ++ } ++} ++ ++/********************************************************************** ++ * u-boot entry functions for mv64460_eth ++ * ++ **********************************************************************/ ++int db64460_eth_probe (struct eth_device *dev) ++{ ++ return ((int) db64460_eth_start (dev)); ++} ++ ++int db64460_eth_poll (struct eth_device *dev) ++{ ++ return mv64460_eth_receive (dev); ++} ++ ++int db64460_eth_transmit (struct eth_device *dev, volatile void *packet, ++ int length) ++{ ++ mv64460_eth_xmit (dev, packet, length); ++ return 0; ++} ++ ++void db64460_eth_disable (struct eth_device *dev) ++{ ++ mv64460_eth_stop (dev); ++} ++ ++#define DFCDL(write,read) ((write << 6) | read) ++unsigned int ethDfcdls[] = { ++ DFCDL(0,0), DFCDL(1,1), DFCDL(2,2), DFCDL(3,3), ++ DFCDL(4,4), DFCDL(5,5), DFCDL(6,6), DFCDL(7,7), ++ DFCDL(8,8), DFCDL(9,9), DFCDL(10,10), DFCDL(11,11), ++ DFCDL(12,12), DFCDL(13,13), DFCDL(14,14), DFCDL(15,15), ++ DFCDL(16,16), DFCDL(17,17), DFCDL(18,18), DFCDL(19,19), ++ DFCDL(20,20), DFCDL(21,21), DFCDL(22,22), DFCDL(23,23), ++ DFCDL(24,24), DFCDL(25,25), DFCDL(26,26), DFCDL(27,27), ++ DFCDL(28,28), DFCDL(29,29), DFCDL(30,30), DFCDL(31,31), ++ DFCDL(32,32), DFCDL(33,33), DFCDL(34,34), DFCDL(35,35), ++ DFCDL(36,36), DFCDL(37,37), DFCDL(38,38), DFCDL(39,39), ++ DFCDL(40,40), DFCDL(41,41), DFCDL(42,42), DFCDL(43,43), ++ DFCDL(44,44), DFCDL(45,45), DFCDL(46,46), DFCDL(47,47), ++ DFCDL(48,48), DFCDL(49,49), DFCDL(50,50), DFCDL(51,51), ++ DFCDL(52,52), DFCDL(53,53), DFCDL(54,54), DFCDL(55,55), ++ DFCDL(56,56), DFCDL(57,57), DFCDL(58,58), DFCDL(59,59), ++ DFCDL(60,60), DFCDL(61,61), DFCDL(62,62), DFCDL(63,63), ++}; ++ ++void mv_eth_phy_init (void) ++{ ++ int i; ++ ++ MV_REG_WRITE (ETH_PHY_DFCDL_ADDR_REG, 0); ++ ++ for (i = 0; i < 64; i++) { ++ MV_REG_WRITE (ETH_PHY_DFCDL_DATA0_REG, ethDfcdls[i]); ++ } ++ ++ MV_REG_WRITE (ETH_PHY_DFCDL_CONFIG0_REG, 0x300000); ++} ++ ++void mv6446x_eth_initialize (bd_t * bis) ++{ ++ struct eth_device *dev; ++ ETH_PORT_INFO *ethernet_private; ++ struct mv64460_eth_priv *port_private; ++ int devnum, x, temp; ++ char *s, *e, buf[64]; ++ ++ /* P3M750 only ++ * Set RGMII clock drives strength ++ */ ++ temp = MV_REG_READ(0x20A0); ++ temp |= 0x04000080; ++ MV_REG_WRITE(0x20A0, temp); ++ ++ mv_eth_phy_init(); ++ ++ for (devnum = 0; devnum < MV_ETH_DEVS; devnum++) { ++ dev = calloc (sizeof (*dev), 1); ++ if (!dev) { ++ printf ("%s: mv_enet%d allocation failure, %s\n", ++ __FUNCTION__, devnum, "eth_device structure"); ++ return; ++ } ++ ++ /* must be less than NAMESIZE (16) */ ++ sprintf (dev->name, "mv_enet%d", devnum); ++ ++#ifdef DEBUG ++ printf ("Initializing %s\n", dev->name); ++#endif ++ ++ /* Extract the MAC address from the environment */ ++ switch (devnum) { ++ case 0: ++ s = "ethaddr"; ++ break; ++ case 1: ++ s = "eth1addr"; ++ break; ++ case 2: ++ s = "eth2addr"; ++ break; ++ default: /* this should never happen */ ++ printf ("%s: Invalid device number %d\n", ++ __FUNCTION__, devnum); ++ return; ++ } ++ ++ temp = getenv_r (s, buf, sizeof (buf)); ++ s = (temp > 0) ? buf : NULL; ++ ++#ifdef DEBUG ++ printf ("Setting MAC %d to %s\n", devnum, s); ++#endif ++ for (x = 0; x < 6; ++x) { ++ dev->enetaddr[x] = s ? simple_strtoul (s, &e, 16) : 0; ++ if (s) ++ s = (*e) ? e + 1 : e; ++ } ++ /* ronen - set the MAC addr in the HW */ ++ eth_port_uc_addr_set (devnum, dev->enetaddr, 0); ++ ++ dev->init = (void *) db64460_eth_probe; ++ dev->halt = (void *) ethernet_phy_reset; ++ dev->send = (void *) db64460_eth_transmit; ++ dev->recv = (void *) db64460_eth_poll; ++ ++ ethernet_private = calloc (sizeof (*ethernet_private), 1); ++ dev->priv = (void *)ethernet_private; ++ if (!ethernet_private) { ++ printf ("%s: %s allocation failure, %s\n", ++ __FUNCTION__, dev->name, ++ "Private Device Structure"); ++ free (dev); ++ return; ++ } ++ /* start with an zeroed ETH_PORT_INFO */ ++ memset (ethernet_private, 0, sizeof (ETH_PORT_INFO)); ++ memcpy (ethernet_private->port_mac_addr, dev->enetaddr, 6); ++ ++ /* set pointer to memory for stats data structure etc... */ ++ port_private = calloc (sizeof (*ethernet_private), 1); ++ ethernet_private->port_private = (void *)port_private; ++ if (!port_private) { ++ printf ("%s: %s allocation failure, %s\n", ++ __FUNCTION__, dev->name, ++ "Port Private Device Structure"); ++ ++ free (ethernet_private); ++ free (dev); ++ return; ++ } ++ ++ port_private->stats = ++ calloc (sizeof (struct net_device_stats), 1); ++ if (!port_private->stats) { ++ printf ("%s: %s allocation failure, %s\n", ++ __FUNCTION__, dev->name, ++ "Net stat Structure"); ++ ++ free (port_private); ++ free (ethernet_private); ++ free (dev); ++ return; ++ } ++ memset (ethernet_private->port_private, 0, ++ sizeof (struct mv64460_eth_priv)); ++ switch (devnum) { ++ case 0: ++ ethernet_private->port_num = ETH_0; ++ break; ++ case 1: ++ ethernet_private->port_num = ETH_1; ++ break; ++ case 2: ++ ethernet_private->port_num = ETH_2; ++ break; ++ default: ++ printf ("Invalid device number %d\n", devnum); ++ break; ++ }; ++ ++ port_private->port_num = devnum; ++ /* ++ * Read MIB counter on the GT in order to reset them, ++ * then zero all the stats fields in memory ++ */ ++ mv64460_eth_update_stat (dev); ++ memset (port_private->stats, 0, ++ sizeof (struct net_device_stats)); ++ /* Extract the MAC address from the environment */ ++ switch (devnum) { ++ case 0: ++ s = "ethaddr"; ++ break; ++ case 1: ++ s = "eth1addr"; ++ break; ++ case 2: ++ s = "eth2addr"; ++ break; ++ default: /* this should never happen */ ++ printf ("%s: Invalid device number %d\n", ++ __FUNCTION__, devnum); ++ return; ++ } ++ ++ temp = getenv_r (s, buf, sizeof (buf)); ++ s = (temp > 0) ? buf : NULL; ++ ++#ifdef DEBUG ++ printf ("Setting MAC %d to %s\n", devnum, s); ++#endif ++ for (x = 0; x < 6; ++x) { ++ dev->enetaddr[x] = s ? simple_strtoul (s, &e, 16) : 0; ++ if (s) ++ s = (*e) ? e + 1 : e; ++ } ++ ++ DP (printf ("Allocating descriptor and buffer rings\n")); ++ ++ ethernet_private->p_rx_desc_area_base[0] = ++ (ETH_RX_DESC *) memalign (16, ++ RX_DESC_ALIGNED_SIZE * ++ MV64460_RX_QUEUE_SIZE + 1); ++ ethernet_private->p_tx_desc_area_base[0] = ++ (ETH_TX_DESC *) memalign (16, ++ TX_DESC_ALIGNED_SIZE * ++ MV64460_TX_QUEUE_SIZE + 1); ++ ++ ethernet_private->p_rx_buffer_base[0] = ++ (char *) memalign (16, ++ MV64460_RX_QUEUE_SIZE * ++ MV64460_TX_BUFFER_SIZE + 1); ++ ethernet_private->p_tx_buffer_base[0] = ++ (char *) memalign (16, ++ MV64460_RX_QUEUE_SIZE * ++ MV64460_TX_BUFFER_SIZE + 1); ++ ++#ifdef DEBUG_MV_ETH ++ /* DEBUG OUTPUT prints adresses of globals */ ++ print_globals (dev); ++#endif ++ eth_register (dev); ++ ++ miiphy_register(dev->name, mv_miiphy_read, mv_miiphy_write); ++ } ++ DP (printf ("%s: exit\n", __FUNCTION__)); ++ ++} ++ ++/********************************************************************** ++ * mv64460_eth_open ++ * ++ * This function is called when openning the network device. The function ++ * should initialize all the hardware, initialize cyclic Rx/Tx ++ * descriptors chain and buffers and allocate an IRQ to the network ++ * device. ++ * ++ * Input : a pointer to the network device structure ++ * / / ronen - changed the output to match net/eth.c needs ++ * Output : nonzero of success , zero if fails. ++ * under construction ++ **********************************************************************/ ++ ++int mv64460_eth_open (struct eth_device *dev) ++{ ++ return (mv64460_eth_real_open (dev)); ++} ++ ++/* Helper function for mv64460_eth_open */ ++static int mv64460_eth_real_open (struct eth_device *dev) ++{ ++ ++ unsigned int queue; ++ ETH_PORT_INFO *ethernet_private; ++ struct mv64460_eth_priv *port_private; ++ unsigned int port_num; ++ u32 port_status; ++ ushort reg_short; ++ int speed; ++ int duplex; ++ int i; ++ int reg; ++ ++ ethernet_private = (ETH_PORT_INFO *) dev->priv; ++ /* ronen - when we update the MAC env params we only update dev->enetaddr ++ see ./net/eth.c eth_set_enetaddr() */ ++ memcpy (ethernet_private->port_mac_addr, dev->enetaddr, 6); ++ ++ port_private = (struct mv64460_eth_priv *) ethernet_private->port_private; ++ port_num = port_private->port_num; ++ ++ /* Stop RX Queues */ ++ MV_REG_WRITE (MV64460_ETH_RECEIVE_QUEUE_COMMAND_REG (port_num), 0x0000ff00); ++ ++ /* Clear the ethernet port interrupts */ ++ MV_REG_WRITE (MV64460_ETH_INTERRUPT_CAUSE_REG (port_num), 0); ++ MV_REG_WRITE (MV64460_ETH_INTERRUPT_CAUSE_EXTEND_REG (port_num), 0); ++ ++ /* Unmask RX buffer and TX end interrupt */ ++ MV_REG_WRITE (MV64460_ETH_INTERRUPT_MASK_REG (port_num), ++ INT_CAUSE_UNMASK_ALL); ++ ++ /* Unmask phy and link status changes interrupts */ ++ MV_REG_WRITE (MV64460_ETH_INTERRUPT_EXTEND_MASK_REG (port_num), ++ INT_CAUSE_UNMASK_ALL_EXT); ++ ++ /* Set phy address of the port */ ++ ethernet_private->port_phy_addr = 0x1 + (port_num << 1); ++ reg = ethernet_private->port_phy_addr; ++ ++ /* Activate the DMA channels etc */ ++ eth_port_init (ethernet_private); ++ ++ /* "Allocate" setup TX rings */ ++ ++ for (queue = 0; queue < MV64460_TX_QUEUE_NUM; queue++) { ++ unsigned int size; ++ ++ port_private->tx_ring_size[queue] = MV64460_TX_QUEUE_SIZE; ++ size = (port_private->tx_ring_size[queue] * TX_DESC_ALIGNED_SIZE); /*size = no of DESCs times DESC-size */ ++ ethernet_private->tx_desc_area_size[queue] = size; ++ ++ /* first clear desc area completely */ ++ memset ((void *) ethernet_private->p_tx_desc_area_base[queue], ++ 0, ethernet_private->tx_desc_area_size[queue]); ++ ++ /* initialize tx desc ring with low level driver */ ++ if (ether_init_tx_desc_ring ++ (ethernet_private, ETH_Q0, ++ port_private->tx_ring_size[queue], ++ MV64460_TX_BUFFER_SIZE /* Each Buffer is 1600 Byte */ , ++ (unsigned int) ethernet_private-> ++ p_tx_desc_area_base[queue], ++ (unsigned int) ethernet_private-> ++ p_tx_buffer_base[queue]) == false) ++ printf ("### Error initializing TX Ring\n"); ++ } ++ ++ /* "Allocate" setup RX rings */ ++ for (queue = 0; queue < MV64460_RX_QUEUE_NUM; queue++) { ++ unsigned int size; ++ ++ /* Meantime RX Ring are fixed - but must be configurable by user */ ++ port_private->rx_ring_size[queue] = MV64460_RX_QUEUE_SIZE; ++ size = (port_private->rx_ring_size[queue] * ++ RX_DESC_ALIGNED_SIZE); ++ ethernet_private->rx_desc_area_size[queue] = size; ++ ++ /* first clear desc area completely */ ++ memset ((void *) ethernet_private->p_rx_desc_area_base[queue], ++ 0, ethernet_private->rx_desc_area_size[queue]); ++ if ((ether_init_rx_desc_ring ++ (ethernet_private, ETH_Q0, ++ port_private->rx_ring_size[queue], ++ MV64460_RX_BUFFER_SIZE /* Each Buffer is 1600 Byte */ , ++ (unsigned int) ethernet_private-> ++ p_rx_desc_area_base[queue], ++ (unsigned int) ethernet_private-> ++ p_rx_buffer_base[queue])) == false) ++ printf ("### Error initializing RX Ring\n"); ++ } ++ ++ eth_port_start (ethernet_private); ++ ++ /* Set maximum receive buffer to 9700 bytes */ ++ MV_REG_WRITE (MV64460_ETH_PORT_SERIAL_CONTROL_REG (port_num), ++ (0x5 << 17) | ++ (MV_REG_READ ++ (MV64460_ETH_PORT_SERIAL_CONTROL_REG (port_num)) ++ & 0xfff1ffff)); ++ ++ /* ++ * Set ethernet MTU for leaky bucket mechanism to 0 - this will ++ * disable the leaky bucket mechanism . ++ */ ++ ++ MV_REG_WRITE (MV64460_ETH_MAXIMUM_TRANSMIT_UNIT (port_num), 0); ++ port_status = MV_REG_READ (MV64460_ETH_PORT_STATUS_REG (port_num)); ++ ++#if defined(CONFIG_PHY_RESET) ++ /* ++ * Reset the phy, only if its the first time through ++ * otherwise, just check the speeds & feeds ++ */ ++ if (port_private->first_init == 0) { ++ port_private->first_init = 1; ++ ethernet_phy_reset (port_num); ++ ++ /* Start/Restart autonegotiation */ ++ phy_setup_aneg (dev->name, reg); ++ udelay (1000); ++ } ++#endif /* defined(CONFIG_PHY_RESET) */ ++ ++ miiphy_read (dev->name, reg, PHY_BMSR, ®_short); ++ ++ /* ++ * Wait if PHY is capable of autonegotiation and autonegotiation is not complete ++ */ ++ if ((reg_short & PHY_BMSR_AUTN_ABLE) ++ && !(reg_short & PHY_BMSR_AUTN_COMP)) { ++ puts ("Waiting for PHY auto negotiation to complete"); ++ i = 0; ++ while (!(reg_short & PHY_BMSR_AUTN_COMP)) { ++ /* ++ * Timeout reached ? ++ */ ++ if (i > PHY_AUTONEGOTIATE_TIMEOUT) { ++ puts (" TIMEOUT !\n"); ++ break; ++ } ++ ++ if ((i++ % 1000) == 0) { ++ putc ('.'); ++ } ++ udelay (1000); /* 1 ms */ ++ miiphy_read (dev->name, reg, PHY_BMSR, ®_short); ++ ++ } ++ puts (" done\n"); ++ udelay (500000); /* another 500 ms (results in faster booting) */ ++ } ++ ++ speed = miiphy_speed (dev->name, reg); ++ duplex = miiphy_duplex (dev->name, reg); ++ ++ printf ("ENET Speed is %d Mbps - %s duplex connection\n", ++ (int) speed, (duplex == HALF) ? "HALF" : "FULL"); ++ ++ port_private->eth_running = MAGIC_ETH_RUNNING; ++ return 1; ++} ++ ++static int mv64460_eth_free_tx_rings (struct eth_device *dev) ++{ ++ unsigned int queue; ++ ETH_PORT_INFO *ethernet_private; ++ struct mv64460_eth_priv *port_private; ++ unsigned int port_num; ++ volatile ETH_TX_DESC *p_tx_curr_desc; ++ ++ ethernet_private = (ETH_PORT_INFO *) dev->priv; ++ port_private = ++ (struct mv64460_eth_priv *) ethernet_private->port_private; ++ port_num = port_private->port_num; ++ ++ /* Stop Tx Queues */ ++ MV_REG_WRITE (MV64460_ETH_TRANSMIT_QUEUE_COMMAND_REG (port_num), ++ 0x0000ff00); ++ ++ /* Free TX rings */ ++ DP (printf ("Clearing previously allocated TX queues... ")); ++ for (queue = 0; queue < MV64460_TX_QUEUE_NUM; queue++) { ++ /* Free on TX rings */ ++ for (p_tx_curr_desc = ++ ethernet_private->p_tx_desc_area_base[queue]; ++ ((unsigned int) p_tx_curr_desc <= (unsigned int) ++ ethernet_private->p_tx_desc_area_base[queue] + ++ ethernet_private->tx_desc_area_size[queue]); ++ p_tx_curr_desc = ++ (ETH_TX_DESC *) ((unsigned int) p_tx_curr_desc + ++ TX_DESC_ALIGNED_SIZE)) { ++ /* this is inside for loop */ ++ if (p_tx_curr_desc->return_info != 0) { ++ p_tx_curr_desc->return_info = 0; ++ DP (printf ("freed\n")); ++ } ++ } ++ DP (printf ("Done\n")); ++ } ++ return 0; ++} ++ ++static int mv64460_eth_free_rx_rings (struct eth_device *dev) ++{ ++ unsigned int queue; ++ ETH_PORT_INFO *ethernet_private; ++ struct mv64460_eth_priv *port_private; ++ unsigned int port_num; ++ volatile ETH_RX_DESC *p_rx_curr_desc; ++ ++ ethernet_private = (ETH_PORT_INFO *) dev->priv; ++ port_private = ++ (struct mv64460_eth_priv *) ethernet_private->port_private; ++ port_num = port_private->port_num; ++ ++ /* Stop RX Queues */ ++ MV_REG_WRITE (MV64460_ETH_RECEIVE_QUEUE_COMMAND_REG (port_num), ++ 0x0000ff00); ++ ++ /* Free RX rings */ ++ DP (printf ("Clearing previously allocated RX queues... ")); ++ for (queue = 0; queue < MV64460_RX_QUEUE_NUM; queue++) { ++ /* Free preallocated skb's on RX rings */ ++ for (p_rx_curr_desc = ++ ethernet_private->p_rx_desc_area_base[queue]; ++ (((unsigned int) p_rx_curr_desc < ++ ((unsigned int) ethernet_private-> ++ p_rx_desc_area_base[queue] + ++ ethernet_private->rx_desc_area_size[queue]))); ++ p_rx_curr_desc = ++ (ETH_RX_DESC *) ((unsigned int) p_rx_curr_desc + ++ RX_DESC_ALIGNED_SIZE)) { ++ if (p_rx_curr_desc->return_info != 0) { ++ p_rx_curr_desc->return_info = 0; ++ DP (printf ("freed\n")); ++ } ++ } ++ DP (printf ("Done\n")); ++ } ++ return 0; ++} ++ ++/********************************************************************** ++ * mv64460_eth_stop ++ * ++ * This function is used when closing the network device. ++ * It updates the hardware, ++ * release all memory that holds buffers and descriptors and release the IRQ. ++ * Input : a pointer to the device structure ++ * Output : zero if success , nonzero if fails ++ *********************************************************************/ ++ ++int mv64460_eth_stop (struct eth_device *dev) ++{ ++ ETH_PORT_INFO *ethernet_private; ++ struct mv64460_eth_priv *port_private; ++ unsigned int port_num; ++ ++ ethernet_private = (ETH_PORT_INFO *) dev->priv; ++ port_private = ++ (struct mv64460_eth_priv *) ethernet_private->port_private; ++ port_num = port_private->port_num; ++ ++ /* Disable all gigE address decoder */ ++ MV_REG_WRITE (MV64460_ETH_BASE_ADDR_ENABLE_REG, 0x3f); ++ DP (printf ("%s Ethernet stop called ... \n", __FUNCTION__)); ++ mv64460_eth_real_stop (dev); ++ ++ return 0; ++}; ++ ++/* Helper function for mv64460_eth_stop */ ++ ++static int mv64460_eth_real_stop (struct eth_device *dev) ++{ ++ ETH_PORT_INFO *ethernet_private; ++ struct mv64460_eth_priv *port_private; ++ unsigned int port_num; ++ ++ ethernet_private = (ETH_PORT_INFO *) dev->priv; ++ port_private = ++ (struct mv64460_eth_priv *) ethernet_private->port_private; ++ port_num = port_private->port_num; ++ ++ mv64460_eth_free_tx_rings (dev); ++ mv64460_eth_free_rx_rings (dev); ++ ++ eth_port_reset (ethernet_private->port_num); ++ /* Disable ethernet port interrupts */ ++ MV_REG_WRITE (MV64460_ETH_INTERRUPT_CAUSE_REG (port_num), 0); ++ MV_REG_WRITE (MV64460_ETH_INTERRUPT_CAUSE_EXTEND_REG (port_num), 0); ++ /* Mask RX buffer and TX end interrupt */ ++ MV_REG_WRITE (MV64460_ETH_INTERRUPT_MASK_REG (port_num), 0); ++ /* Mask phy and link status changes interrupts */ ++ MV_REG_WRITE (MV64460_ETH_INTERRUPT_EXTEND_MASK_REG (port_num), 0); ++ MV_RESET_REG_BITS (MV64460_CPU_INTERRUPT0_MASK_HIGH, ++ BIT0 << port_num); ++ /* Print Network statistics */ ++#ifndef UPDATE_STATS_BY_SOFTWARE ++ /* ++ * Print statistics (only if ethernet is running), ++ * then zero all the stats fields in memory ++ */ ++ if (port_private->eth_running == MAGIC_ETH_RUNNING) { ++ port_private->eth_running = 0; ++ mv64460_eth_print_stat (dev); ++ } ++ memset (port_private->stats, 0, sizeof (struct net_device_stats)); ++#endif ++ DP (printf ("\nEthernet stopped ... \n")); ++ return 0; ++} ++ ++/********************************************************************** ++ * mv64460_eth_start_xmit ++ * ++ * This function is queues a packet in the Tx descriptor for ++ * required port. ++ * ++ * Input : skb - a pointer to socket buffer ++ * dev - a pointer to the required port ++ * ++ * Output : zero upon success ++ **********************************************************************/ ++ ++int mv64460_eth_xmit (struct eth_device *dev, volatile void *dataPtr, ++ int dataSize) ++{ ++ ETH_PORT_INFO *ethernet_private; ++ struct mv64460_eth_priv *port_private; ++ unsigned int port_num; ++ PKT_INFO pkt_info; ++ ETH_FUNC_RET_STATUS status; ++ struct net_device_stats *stats; ++ ETH_FUNC_RET_STATUS release_result; ++ ++ ethernet_private = (ETH_PORT_INFO *) dev->priv; ++ port_private = ++ (struct mv64460_eth_priv *) ethernet_private->port_private; ++ port_num = port_private->port_num; ++ ++ stats = port_private->stats; ++ ++ /* Update packet info data structure */ ++ pkt_info.cmd_sts = ETH_TX_FIRST_DESC | ETH_TX_LAST_DESC; /* DMA owned, first last */ ++ pkt_info.byte_cnt = dataSize; ++ pkt_info.buf_ptr = (unsigned int) dataPtr; ++ pkt_info.return_info = 0; ++ ++ status = eth_port_send (ethernet_private, ETH_Q0, &pkt_info); ++ if ((status == ETH_ERROR) || (status == ETH_QUEUE_FULL)) { ++ printf ("Error on transmitting packet .."); ++ if (status == ETH_QUEUE_FULL) ++ printf ("ETH Queue is full. \n"); ++ if (status == ETH_QUEUE_LAST_RESOURCE) ++ printf ("ETH Queue: using last available resource. \n"); ++ return 1; ++ } ++ ++ /* Update statistics and start of transmittion time */ ++ stats->tx_bytes += dataSize; ++ stats->tx_packets++; ++ ++ /* Check if packet(s) is(are) transmitted correctly (release everything) */ ++ do { ++ release_result = ++ eth_tx_return_desc (ethernet_private, ETH_Q0, ++ &pkt_info); ++ switch (release_result) { ++ case ETH_OK: ++ DP (printf ("descriptor released\n")); ++ if (pkt_info.cmd_sts & BIT0) { ++ printf ("Error in TX\n"); ++ stats->tx_errors++; ++ } ++ break; ++ case ETH_RETRY: ++ DP (printf ("transmission still in process\n")); ++ break; ++ ++ case ETH_ERROR: ++ printf ("routine can not access Tx desc ring\n"); ++ break; ++ ++ case ETH_END_OF_JOB: ++ DP (printf ("the routine has nothing to release\n")); ++ break; ++ default: /* should not happen */ ++ break; ++ } ++ } while (release_result == ETH_OK); ++ ++ return 0; /* success */ ++} ++ ++/********************************************************************** ++ * mv64460_eth_receive ++ * ++ * This function is forward packets that are received from the port's ++ * queues toward kernel core or FastRoute them to another interface. ++ * ++ * Input : dev - a pointer to the required interface ++ * max - maximum number to receive (0 means unlimted) ++ * ++ * Output : number of served packets ++ **********************************************************************/ ++ ++int mv64460_eth_receive (struct eth_device *dev) ++{ ++ ETH_PORT_INFO *ethernet_private; ++ struct mv64460_eth_priv *port_private; ++ unsigned int port_num; ++ PKT_INFO pkt_info; ++ struct net_device_stats *stats; ++ ++ ethernet_private = (ETH_PORT_INFO *) dev->priv; ++ port_private = (struct mv64460_eth_priv *) ethernet_private->port_private; ++ port_num = port_private->port_num; ++ stats = port_private->stats; ++ ++ while ((eth_port_receive (ethernet_private, ETH_Q0, &pkt_info) == ETH_OK)) { ++#ifdef DEBUG_MV_ETH ++ if (pkt_info.byte_cnt != 0) { ++ printf ("%s: Received %d byte Packet @ 0x%x\n", ++ __FUNCTION__, pkt_info.byte_cnt, ++ pkt_info.buf_ptr); ++ if(pkt_info.buf_ptr != 0){ ++ for(i=0; i < pkt_info.byte_cnt; i++){ ++ if((i % 4) == 0){ ++ printf("\n0x"); ++ } ++ printf("%02x", ((char*)pkt_info.buf_ptr)[i]); ++ } ++ printf("\n"); ++ } ++ } ++#endif ++ /* Update statistics. Note byte count includes 4 byte CRC count */ ++ stats->rx_packets++; ++ stats->rx_bytes += pkt_info.byte_cnt; ++ ++ /* ++ * In case received a packet without first / last bits on OR the error ++ * summary bit is on, the packets needs to be dropeed. ++ */ ++ if (((pkt_info. ++ cmd_sts & (ETH_RX_FIRST_DESC | ETH_RX_LAST_DESC)) != ++ (ETH_RX_FIRST_DESC | ETH_RX_LAST_DESC)) ++ || (pkt_info.cmd_sts & ETH_ERROR_SUMMARY)) { ++ stats->rx_dropped++; ++ ++ printf ("Received packet spread on multiple descriptors\n"); ++ ++ /* Is this caused by an error ? */ ++ if (pkt_info.cmd_sts & ETH_ERROR_SUMMARY) { ++ stats->rx_errors++; ++ } ++ ++ /* free these descriptors again without forwarding them to the higher layers */ ++ pkt_info.buf_ptr &= ~0x7; /* realign buffer again */ ++ pkt_info.byte_cnt = 0x0000; /* Reset Byte count */ ++ ++ if (eth_rx_return_buff ++ (ethernet_private, ETH_Q0, &pkt_info) != ETH_OK) { ++ printf ("Error while returning the RX Desc to Ring\n"); ++ } else { ++ DP (printf ("RX Desc returned to Ring\n")); ++ } ++ /* /free these descriptors again */ ++ } else { ++ ++/* !!! call higher layer processing */ ++#ifdef DEBUG_MV_ETH ++ printf ("\nNow send it to upper layer protocols (NetReceive) ...\n"); ++#endif ++ /* let the upper layer handle the packet */ ++ NetReceive ((uchar *) pkt_info.buf_ptr, ++ (int) pkt_info.byte_cnt); ++ ++/* **************************************************************** */ ++/* free descriptor */ ++ pkt_info.buf_ptr &= ~0x7; /* realign buffer again */ ++ pkt_info.byte_cnt = 0x0000; /* Reset Byte count */ ++ DP (printf ("RX: pkt_info.buf_ptr = %x\n", pkt_info.buf_ptr)); ++ if (eth_rx_return_buff ++ (ethernet_private, ETH_Q0, &pkt_info) != ETH_OK) { ++ printf ("Error while returning the RX Desc to Ring\n"); ++ } else { ++ DP (printf ("RX: Desc returned to Ring\n")); ++ } ++ ++/* **************************************************************** */ ++ ++ } ++ } ++ mv64460_eth_get_stats (dev); /* update statistics */ ++ return 1; ++} ++ ++/********************************************************************** ++ * mv64460_eth_get_stats ++ * ++ * Returns a pointer to the interface statistics. ++ * ++ * Input : dev - a pointer to the required interface ++ * ++ * Output : a pointer to the interface's statistics ++ **********************************************************************/ ++ ++static struct net_device_stats *mv64460_eth_get_stats (struct eth_device *dev) ++{ ++ ETH_PORT_INFO *ethernet_private; ++ struct mv64460_eth_priv *port_private; ++ unsigned int port_num; ++ ++ ethernet_private = (ETH_PORT_INFO *) dev->priv; ++ port_private = ++ (struct mv64460_eth_priv *) ethernet_private->port_private; ++ port_num = port_private->port_num; ++ ++ mv64460_eth_update_stat (dev); ++ ++ return port_private->stats; ++} ++ ++/********************************************************************** ++ * mv64460_eth_update_stat ++ * ++ * Update the statistics structure in the private data structure ++ * ++ * Input : pointer to ethernet interface network device structure ++ * Output : N/A ++ **********************************************************************/ ++ ++static void mv64460_eth_update_stat (struct eth_device *dev) ++{ ++ ETH_PORT_INFO *ethernet_private; ++ struct mv64460_eth_priv *port_private; ++ struct net_device_stats *stats; ++ unsigned int port_num; ++ volatile unsigned int dummy; ++ ++ ethernet_private = (ETH_PORT_INFO *) dev->priv; ++ port_private = ++ (struct mv64460_eth_priv *) ethernet_private->port_private; ++ port_num = port_private->port_num; ++ stats = port_private->stats; ++ ++ /* These are false updates */ ++ stats->rx_packets += (unsigned long) ++ eth_read_mib_counter (ethernet_private->port_num, ++ ETH_MIB_GOOD_FRAMES_RECEIVED); ++ stats->tx_packets += (unsigned long) ++ eth_read_mib_counter (ethernet_private->port_num, ++ ETH_MIB_GOOD_FRAMES_SENT); ++ stats->rx_bytes += (unsigned long) ++ eth_read_mib_counter (ethernet_private->port_num, ++ ETH_MIB_GOOD_OCTETS_RECEIVED_LOW); ++ /* ++ * Ideally this should be as follows - ++ * ++ * stats->rx_bytes += stats->rx_bytes + ++ * ((unsigned long) ethReadMibCounter (ethernet_private->port_num , ++ * ETH_MIB_GOOD_OCTETS_RECEIVED_HIGH) << 32); ++ * ++ * But the unsigned long in PowerPC and MIPS are 32bit. So the next read ++ * is just a dummy read for proper work of the GigE port ++ */ ++ dummy = eth_read_mib_counter (ethernet_private->port_num, ++ ETH_MIB_GOOD_OCTETS_RECEIVED_HIGH); ++ stats->tx_bytes += (unsigned long) ++ eth_read_mib_counter (ethernet_private->port_num, ++ ETH_MIB_GOOD_OCTETS_SENT_LOW); ++ dummy = eth_read_mib_counter (ethernet_private->port_num, ++ ETH_MIB_GOOD_OCTETS_SENT_HIGH); ++ stats->rx_errors += (unsigned long) ++ eth_read_mib_counter (ethernet_private->port_num, ++ ETH_MIB_MAC_RECEIVE_ERROR); ++ ++ /* Rx dropped is for received packet with CRC error */ ++ stats->rx_dropped += ++ (unsigned long) eth_read_mib_counter (ethernet_private-> ++ port_num, ++ ETH_MIB_BAD_CRC_EVENT); ++ stats->multicast += (unsigned long) ++ eth_read_mib_counter (ethernet_private->port_num, ++ ETH_MIB_MULTICAST_FRAMES_RECEIVED); ++ stats->collisions += ++ (unsigned long) eth_read_mib_counter (ethernet_private-> ++ port_num, ++ ETH_MIB_COLLISION) + ++ (unsigned long) eth_read_mib_counter (ethernet_private-> ++ port_num, ++ ETH_MIB_LATE_COLLISION); ++ /* detailed rx errors */ ++ stats->rx_length_errors += ++ (unsigned long) eth_read_mib_counter (ethernet_private-> ++ port_num, ++ ETH_MIB_UNDERSIZE_RECEIVED) ++ + ++ (unsigned long) eth_read_mib_counter (ethernet_private-> ++ port_num, ++ ETH_MIB_OVERSIZE_RECEIVED); ++ /* detailed tx errors */ ++} ++ ++#ifndef UPDATE_STATS_BY_SOFTWARE ++/********************************************************************** ++ * mv64460_eth_print_stat ++ * ++ * Update the statistics structure in the private data structure ++ * ++ * Input : pointer to ethernet interface network device structure ++ * Output : N/A ++ **********************************************************************/ ++ ++static void mv64460_eth_print_stat (struct eth_device *dev) ++{ ++ ETH_PORT_INFO *ethernet_private; ++ struct mv64460_eth_priv *port_private; ++ struct net_device_stats *stats; ++ unsigned int port_num; ++ ++ ethernet_private = (ETH_PORT_INFO *) dev->priv; ++ port_private = ++ (struct mv64460_eth_priv *) ethernet_private->port_private; ++ port_num = port_private->port_num; ++ stats = port_private->stats; ++ ++ /* These are false updates */ ++ printf ("\n### Network statistics: ###\n"); ++ printf ("--------------------------\n"); ++ printf (" Packets received: %ld\n", stats->rx_packets); ++ printf (" Packets send: %ld\n", stats->tx_packets); ++ printf (" Received bytes: %ld\n", stats->rx_bytes); ++ printf (" Send bytes: %ld\n", stats->tx_bytes); ++ if (stats->rx_errors != 0) ++ printf (" Rx Errors: %ld\n", ++ stats->rx_errors); ++ if (stats->rx_dropped != 0) ++ printf (" Rx dropped (CRC Errors): %ld\n", ++ stats->rx_dropped); ++ if (stats->multicast != 0) ++ printf (" Rx mulicast frames: %ld\n", ++ stats->multicast); ++ if (stats->collisions != 0) ++ printf (" No. of collisions: %ld\n", ++ stats->collisions); ++ if (stats->rx_length_errors != 0) ++ printf (" Rx length errors: %ld\n", ++ stats->rx_length_errors); ++} ++#endif ++ ++/************************************************************************** ++ *network_start - Network Kick Off Routine UBoot ++ *Inputs : ++ *Outputs : ++ **************************************************************************/ ++ ++bool db64460_eth_start (struct eth_device *dev) ++{ ++ return (mv64460_eth_open (dev)); /* calls real open */ ++} ++ ++/************************************************************************* ++************************************************************************** ++************************************************************************** ++* The second part is the low level driver of the gigE ethernet ports. * ++************************************************************************** ++************************************************************************** ++*************************************************************************/ ++/* ++ * based on Linux code ++ * arch/ppc/galileo/EVB64460/mv64460_eth.c - Driver for MV64460X ethernet ports ++ * Copyright (C) 2002 rabeeh@galileo.co.il ++ ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * as published by the Free Software Foundation; either version 2 ++ * of the License, or (at your option) any later version. ++ ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. ++ * ++ */ ++ ++/******************************************************************************** ++ * Marvell's Gigabit Ethernet controller low level driver ++ * ++ * DESCRIPTION: ++ * This file introduce low level API to Marvell's Gigabit Ethernet ++ * controller. This Gigabit Ethernet Controller driver API controls ++ * 1) Operations (i.e. port init, start, reset etc'). ++ * 2) Data flow (i.e. port send, receive etc'). ++ * Each Gigabit Ethernet port is controlled via ETH_PORT_INFO ++ * struct. ++ * This struct includes user configuration information as well as ++ * driver internal data needed for its operations. ++ * ++ * Supported Features: ++ * - This low level driver is OS independent. Allocating memory for ++ * the descriptor rings and buffers are not within the scope of ++ * this driver. ++ * - The user is free from Rx/Tx queue managing. ++ * - This low level driver introduce functionality API that enable ++ * the to operate Marvell's Gigabit Ethernet Controller in a ++ * convenient way. ++ * - Simple Gigabit Ethernet port operation API. ++ * - Simple Gigabit Ethernet port data flow API. ++ * - Data flow and operation API support per queue functionality. ++ * - Support cached descriptors for better performance. ++ * - Enable access to all four DRAM banks and internal SRAM memory ++ * spaces. ++ * - PHY access and control API. ++ * - Port control register configuration API. ++ * - Full control over Unicast and Multicast MAC configurations. ++ * ++ * Operation flow: ++ * ++ * Initialization phase ++ * This phase complete the initialization of the ETH_PORT_INFO ++ * struct. ++ * User information regarding port configuration has to be set ++ * prior to calling the port initialization routine. For example, ++ * the user has to assign the port_phy_addr field which is board ++ * depended parameter. ++ * In this phase any port Tx/Rx activity is halted, MIB counters ++ * are cleared, PHY address is set according to user parameter and ++ * access to DRAM and internal SRAM memory spaces. ++ * ++ * Driver ring initialization ++ * Allocating memory for the descriptor rings and buffers is not ++ * within the scope of this driver. Thus, the user is required to ++ * allocate memory for the descriptors ring and buffers. Those ++ * memory parameters are used by the Rx and Tx ring initialization ++ * routines in order to curve the descriptor linked list in a form ++ * of a ring. ++ * Note: Pay special attention to alignment issues when using ++ * cached descriptors/buffers. In this phase the driver store ++ * information in the ETH_PORT_INFO struct regarding each queue ++ * ring. ++ * ++ * Driver start ++ * This phase prepares the Ethernet port for Rx and Tx activity. ++ * It uses the information stored in the ETH_PORT_INFO struct to ++ * initialize the various port registers. ++ * ++ * Data flow: ++ * All packet references to/from the driver are done using PKT_INFO ++ * struct. ++ * This struct is a unified struct used with Rx and Tx operations. ++ * This way the user is not required to be familiar with neither ++ * Tx nor Rx descriptors structures. ++ * The driver's descriptors rings are management by indexes. ++ * Those indexes controls the ring resources and used to indicate ++ * a SW resource error: ++ * 'current' ++ * This index points to the current available resource for use. For ++ * example in Rx process this index will point to the descriptor ++ * that will be passed to the user upon calling the receive routine. ++ * In Tx process, this index will point to the descriptor ++ * that will be assigned with the user packet info and transmitted. ++ * 'used' ++ * This index points to the descriptor that need to restore its ++ * resources. For example in Rx process, using the Rx buffer return ++ * API will attach the buffer returned in packet info to the ++ * descriptor pointed by 'used'. In Tx process, using the Tx ++ * descriptor return will merely return the user packet info with ++ * the command status of the transmitted buffer pointed by the ++ * 'used' index. Nevertheless, it is essential to use this routine ++ * to update the 'used' index. ++ * 'first' ++ * This index supports Tx Scatter-Gather. It points to the first ++ * descriptor of a packet assembled of multiple buffers. For example ++ * when in middle of Such packet we have a Tx resource error the ++ * 'curr' index get the value of 'first' to indicate that the ring ++ * returned to its state before trying to transmit this packet. ++ * ++ * Receive operation: ++ * The eth_port_receive API set the packet information struct, ++ * passed by the caller, with received information from the ++ * 'current' SDMA descriptor. ++ * It is the user responsibility to return this resource back ++ * to the Rx descriptor ring to enable the reuse of this source. ++ * Return Rx resource is done using the eth_rx_return_buff API. ++ * ++ * Transmit operation: ++ * The eth_port_send API supports Scatter-Gather which enables to ++ * send a packet spanned over multiple buffers. This means that ++ * for each packet info structure given by the user and put into ++ * the Tx descriptors ring, will be transmitted only if the 'LAST' ++ * bit will be set in the packet info command status field. This ++ * API also consider restriction regarding buffer alignments and ++ * sizes. ++ * The user must return a Tx resource after ensuring the buffer ++ * has been transmitted to enable the Tx ring indexes to update. ++ * ++ * BOARD LAYOUT ++ * This device is on-board. No jumper diagram is necessary. ++ * ++ * EXTERNAL INTERFACE ++ * ++ * Prior to calling the initialization routine eth_port_init() the user ++ * must set the following fields under ETH_PORT_INFO struct: ++ * port_num User Ethernet port number. ++ * port_phy_addr User PHY address of Ethernet port. ++ * port_mac_addr[6] User defined port MAC address. ++ * port_config User port configuration value. ++ * port_config_extend User port config extend value. ++ * port_sdma_config User port SDMA config value. ++ * port_serial_control User port serial control value. ++ * *port_virt_to_phys () User function to cast virtual addr to CPU bus addr. ++ * *port_private User scratch pad for user specific data structures. ++ * ++ * This driver introduce a set of default values: ++ * PORT_CONFIG_VALUE Default port configuration value ++ * PORT_CONFIG_EXTEND_VALUE Default port extend configuration value ++ * PORT_SDMA_CONFIG_VALUE Default sdma control value ++ * PORT_SERIAL_CONTROL_VALUE Default port serial control value ++ * ++ * This driver data flow is done using the PKT_INFO struct which is ++ * a unified struct for Rx and Tx operations: ++ * byte_cnt Tx/Rx descriptor buffer byte count. ++ * l4i_chk CPU provided TCP Checksum. For Tx operation only. ++ * cmd_sts Tx/Rx descriptor command status. ++ * buf_ptr Tx/Rx descriptor buffer pointer. ++ * return_info Tx/Rx user resource return information. ++ * ++ * ++ * EXTERNAL SUPPORT REQUIREMENTS ++ * ++ * This driver requires the following external support: ++ * ++ * D_CACHE_FLUSH_LINE (address, address offset) ++ * ++ * This macro applies assembly code to flush and invalidate cache ++ * line. ++ * address - address base. ++ * address offset - address offset ++ * ++ * ++ * CPU_PIPE_FLUSH ++ * ++ * This macro applies assembly code to flush the CPU pipeline. ++ * ++ *******************************************************************************/ ++/* includes */ ++ ++/* defines */ ++/* SDMA command macros */ ++#define ETH_ENABLE_TX_QUEUE(tx_queue, eth_port) \ ++ MV_REG_WRITE(MV64460_ETH_TRANSMIT_QUEUE_COMMAND_REG(eth_port), (1 << tx_queue)) ++ ++#define ETH_DISABLE_TX_QUEUE(tx_queue, eth_port) \ ++ MV_REG_WRITE(MV64460_ETH_TRANSMIT_QUEUE_COMMAND_REG(eth_port),\ ++ (1 << (8 + tx_queue))) ++ ++#define ETH_ENABLE_RX_QUEUE(rx_queue, eth_port) \ ++MV_REG_WRITE(MV64460_ETH_RECEIVE_QUEUE_COMMAND_REG(eth_port), (1 << rx_queue)) ++ ++#define ETH_DISABLE_RX_QUEUE(rx_queue, eth_port) \ ++MV_REG_WRITE(MV64460_ETH_RECEIVE_QUEUE_COMMAND_REG(eth_port), (1 << (8 + rx_queue))) ++ ++#define CURR_RFD_GET(p_curr_desc, queue) \ ++ ((p_curr_desc) = p_eth_port_ctrl->p_rx_curr_desc_q[queue]) ++ ++#define CURR_RFD_SET(p_curr_desc, queue) \ ++ (p_eth_port_ctrl->p_rx_curr_desc_q[queue] = (p_curr_desc)) ++ ++#define USED_RFD_GET(p_used_desc, queue) \ ++ ((p_used_desc) = p_eth_port_ctrl->p_rx_used_desc_q[queue]) ++ ++#define USED_RFD_SET(p_used_desc, queue)\ ++(p_eth_port_ctrl->p_rx_used_desc_q[queue] = (p_used_desc)) ++ ++ ++#define CURR_TFD_GET(p_curr_desc, queue) \ ++ ((p_curr_desc) = p_eth_port_ctrl->p_tx_curr_desc_q[queue]) ++ ++#define CURR_TFD_SET(p_curr_desc, queue) \ ++ (p_eth_port_ctrl->p_tx_curr_desc_q[queue] = (p_curr_desc)) ++ ++#define USED_TFD_GET(p_used_desc, queue) \ ++ ((p_used_desc) = p_eth_port_ctrl->p_tx_used_desc_q[queue]) ++ ++#define USED_TFD_SET(p_used_desc, queue) \ ++ (p_eth_port_ctrl->p_tx_used_desc_q[queue] = (p_used_desc)) ++ ++#define FIRST_TFD_GET(p_first_desc, queue) \ ++ ((p_first_desc) = p_eth_port_ctrl->p_tx_first_desc_q[queue]) ++ ++#define FIRST_TFD_SET(p_first_desc, queue) \ ++ (p_eth_port_ctrl->p_tx_first_desc_q[queue] = (p_first_desc)) ++ ++ ++/* Macros that save access to desc in order to find next desc pointer */ ++#define RX_NEXT_DESC_PTR(p_rx_desc, queue) (ETH_RX_DESC*)(((((unsigned int)p_rx_desc - (unsigned int)p_eth_port_ctrl->p_rx_desc_area_base[queue]) + RX_DESC_ALIGNED_SIZE) % p_eth_port_ctrl->rx_desc_area_size[queue]) + (unsigned int)p_eth_port_ctrl->p_rx_desc_area_base[queue]) ++ ++#define TX_NEXT_DESC_PTR(p_tx_desc, queue) (ETH_TX_DESC*)(((((unsigned int)p_tx_desc - (unsigned int)p_eth_port_ctrl->p_tx_desc_area_base[queue]) + TX_DESC_ALIGNED_SIZE) % p_eth_port_ctrl->tx_desc_area_size[queue]) + (unsigned int)p_eth_port_ctrl->p_tx_desc_area_base[queue]) ++ ++#define LINK_UP_TIMEOUT 100000 ++#define PHY_BUSY_TIMEOUT 10000000 ++ ++/* locals */ ++ ++/* PHY routines */ ++static void ethernet_phy_set (ETH_PORT eth_port_num, int phy_addr); ++static int ethernet_phy_get (ETH_PORT eth_port_num); ++ ++/* Ethernet Port routines */ ++static void eth_set_access_control (ETH_PORT eth_port_num, ++ ETH_WIN_PARAM * param); ++static bool eth_port_uc_addr (ETH_PORT eth_port_num, unsigned char uc_nibble, ++ ETH_QUEUE queue, int option); ++#if 0 /* FIXME */ ++static bool eth_port_smc_addr (ETH_PORT eth_port_num, ++ unsigned char mc_byte, ++ ETH_QUEUE queue, int option); ++static bool eth_port_omc_addr (ETH_PORT eth_port_num, ++ unsigned char crc8, ++ ETH_QUEUE queue, int option); ++#endif ++ ++static void eth_b_copy (unsigned int src_addr, unsigned int dst_addr, ++ int byte_count); ++ ++void eth_dbg (ETH_PORT_INFO * p_eth_port_ctrl); ++ ++ ++typedef enum _memory_bank { BANK0, BANK1, BANK2, BANK3 } MEMORY_BANK; ++u32 mv_get_dram_bank_base_addr (MEMORY_BANK bank) ++{ ++ u32 result = 0; ++ u32 enable = MV_REG_READ (MV64460_BASE_ADDR_ENABLE); ++ ++ if (enable & (1 << bank)) ++ return 0; ++ if (bank == BANK0) ++ result = MV_REG_READ (MV64460_CS_0_BASE_ADDR); ++ if (bank == BANK1) ++ result = MV_REG_READ (MV64460_CS_1_BASE_ADDR); ++ if (bank == BANK2) ++ result = MV_REG_READ (MV64460_CS_2_BASE_ADDR); ++ if (bank == BANK3) ++ result = MV_REG_READ (MV64460_CS_3_BASE_ADDR); ++ result &= 0x0000ffff; ++ result = result << 16; ++ return result; ++} ++ ++u32 mv_get_dram_bank_size (MEMORY_BANK bank) ++{ ++ u32 result = 0; ++ u32 enable = MV_REG_READ (MV64460_BASE_ADDR_ENABLE); ++ ++ if (enable & (1 << bank)) ++ return 0; ++ if (bank == BANK0) ++ result = MV_REG_READ (MV64460_CS_0_SIZE); ++ if (bank == BANK1) ++ result = MV_REG_READ (MV64460_CS_1_SIZE); ++ if (bank == BANK2) ++ result = MV_REG_READ (MV64460_CS_2_SIZE); ++ if (bank == BANK3) ++ result = MV_REG_READ (MV64460_CS_3_SIZE); ++ result += 1; ++ result &= 0x0000ffff; ++ result = result << 16; ++ return result; ++} ++ ++u32 mv_get_internal_sram_base (void) ++{ ++ u32 result; ++ ++ result = MV_REG_READ (MV64460_INTEGRATED_SRAM_BASE_ADDR); ++ result &= 0x0000ffff; ++ result = result << 16; ++ return result; ++} ++ ++/******************************************************************************* ++* eth_port_init - Initialize the Ethernet port driver ++* ++* DESCRIPTION: ++* This function prepares the ethernet port to start its activity: ++* 1) Completes the ethernet port driver struct initialization toward port ++* start routine. ++* 2) Resets the device to a quiescent state in case of warm reboot. ++* 3) Enable SDMA access to all four DRAM banks as well as internal SRAM. ++* 4) Clean MAC tables. The reset status of those tables is unknown. ++* 5) Set PHY address. ++* Note: Call this routine prior to eth_port_start routine and after setting ++* user values in the user fields of Ethernet port control struct (i.e. ++* port_phy_addr). ++* ++* INPUT: ++* ETH_PORT_INFO *p_eth_port_ctrl Ethernet port control struct ++* ++* OUTPUT: ++* See description. ++* ++* RETURN: ++* None. ++* ++*******************************************************************************/ ++static void eth_port_init (ETH_PORT_INFO * p_eth_port_ctrl) ++{ ++ int queue; ++ ETH_WIN_PARAM win_param; ++ ++ p_eth_port_ctrl->port_config = PORT_CONFIG_VALUE; ++ p_eth_port_ctrl->port_config_extend = PORT_CONFIG_EXTEND_VALUE; ++ p_eth_port_ctrl->port_sdma_config = PORT_SDMA_CONFIG_VALUE; ++ p_eth_port_ctrl->port_serial_control = PORT_SERIAL_CONTROL_VALUE; ++ ++ p_eth_port_ctrl->port_rx_queue_command = 0; ++ p_eth_port_ctrl->port_tx_queue_command = 0; ++ ++ /* Zero out SW structs */ ++ for (queue = 0; queue < MAX_RX_QUEUE_NUM; queue++) { ++ CURR_RFD_SET ((ETH_RX_DESC *) 0x00000000, queue); ++ USED_RFD_SET ((ETH_RX_DESC *) 0x00000000, queue); ++ p_eth_port_ctrl->rx_resource_err[queue] = false; ++ } ++ ++ for (queue = 0; queue < MAX_TX_QUEUE_NUM; queue++) { ++ CURR_TFD_SET ((ETH_TX_DESC *) 0x00000000, queue); ++ USED_TFD_SET ((ETH_TX_DESC *) 0x00000000, queue); ++ FIRST_TFD_SET ((ETH_TX_DESC *) 0x00000000, queue); ++ p_eth_port_ctrl->tx_resource_err[queue] = false; ++ } ++ ++ eth_port_reset (p_eth_port_ctrl->port_num); ++ ++ /* Set access parameters for DRAM bank 0 */ ++ win_param.win = ETH_WIN0; /* Use Ethernet window 0 */ ++ win_param.target = ETH_TARGET_DRAM; /* Window target - DDR */ ++ win_param.attributes = EBAR_ATTR_DRAM_CS0; /* Enable DRAM bank */ ++#ifndef CONFIG_NOT_COHERENT_CACHE ++ win_param.attributes |= EBAR_ATTR_DRAM_CACHE_COHERENCY_WB; ++#endif ++ win_param.high_addr = 0; ++ /* Get bank base */ ++ win_param.base_addr = mv_get_dram_bank_base_addr (BANK0); ++ win_param.size = mv_get_dram_bank_size (BANK0); /* Get bank size */ ++ if (win_param.size == 0) ++ win_param.enable = 0; ++ else ++ win_param.enable = 1; /* Enable the access */ ++ win_param.access_ctrl = EWIN_ACCESS_FULL; /* Enable full access */ ++ ++ /* Set the access control for address window (EPAPR) READ & WRITE */ ++ eth_set_access_control (p_eth_port_ctrl->port_num, &win_param); ++ ++ /* Set access parameters for DRAM bank 1 */ ++ win_param.win = ETH_WIN1; /* Use Ethernet window 1 */ ++ win_param.target = ETH_TARGET_DRAM; /* Window target - DDR */ ++ win_param.attributes = EBAR_ATTR_DRAM_CS1; /* Enable DRAM bank */ ++#ifndef CONFIG_NOT_COHERENT_CACHE ++ win_param.attributes |= EBAR_ATTR_DRAM_CACHE_COHERENCY_WB; ++#endif ++ win_param.high_addr = 0; ++ /* Get bank base */ ++ win_param.base_addr = mv_get_dram_bank_base_addr (BANK1); ++ win_param.size = mv_get_dram_bank_size (BANK1); /* Get bank size */ ++ if (win_param.size == 0) ++ win_param.enable = 0; ++ else ++ win_param.enable = 1; /* Enable the access */ ++ win_param.access_ctrl = EWIN_ACCESS_FULL; /* Enable full access */ ++ ++ /* Set the access control for address window (EPAPR) READ & WRITE */ ++ eth_set_access_control (p_eth_port_ctrl->port_num, &win_param); ++ ++ /* Set access parameters for DRAM bank 2 */ ++ win_param.win = ETH_WIN2; /* Use Ethernet window 2 */ ++ win_param.target = ETH_TARGET_DRAM; /* Window target - DDR */ ++ win_param.attributes = EBAR_ATTR_DRAM_CS2; /* Enable DRAM bank */ ++#ifndef CONFIG_NOT_COHERENT_CACHE ++ win_param.attributes |= EBAR_ATTR_DRAM_CACHE_COHERENCY_WB; ++#endif ++ win_param.high_addr = 0; ++ /* Get bank base */ ++ win_param.base_addr = mv_get_dram_bank_base_addr (BANK2); ++ win_param.size = mv_get_dram_bank_size (BANK2); /* Get bank size */ ++ if (win_param.size == 0) ++ win_param.enable = 0; ++ else ++ win_param.enable = 1; /* Enable the access */ ++ win_param.access_ctrl = EWIN_ACCESS_FULL; /* Enable full access */ ++ ++ /* Set the access control for address window (EPAPR) READ & WRITE */ ++ eth_set_access_control (p_eth_port_ctrl->port_num, &win_param); ++ ++ /* Set access parameters for DRAM bank 3 */ ++ win_param.win = ETH_WIN3; /* Use Ethernet window 3 */ ++ win_param.target = ETH_TARGET_DRAM; /* Window target - DDR */ ++ win_param.attributes = EBAR_ATTR_DRAM_CS3; /* Enable DRAM bank */ ++#ifndef CONFIG_NOT_COHERENT_CACHE ++ win_param.attributes |= EBAR_ATTR_DRAM_CACHE_COHERENCY_WB; ++#endif ++ win_param.high_addr = 0; ++ /* Get bank base */ ++ win_param.base_addr = mv_get_dram_bank_base_addr (BANK3); ++ win_param.size = mv_get_dram_bank_size (BANK3); /* Get bank size */ ++ if (win_param.size == 0) ++ win_param.enable = 0; ++ else ++ win_param.enable = 1; /* Enable the access */ ++ win_param.access_ctrl = EWIN_ACCESS_FULL; /* Enable full access */ ++ ++ /* Set the access control for address window (EPAPR) READ & WRITE */ ++ eth_set_access_control (p_eth_port_ctrl->port_num, &win_param); ++ ++ /* Set access parameters for Internal SRAM */ ++ win_param.win = ETH_WIN4; /* Use Ethernet window 0 */ ++ win_param.target = EBAR_TARGET_CBS; /* Target - Internal SRAM */ ++ win_param.attributes = EBAR_ATTR_CBS_SRAM | EBAR_ATTR_CBS_SRAM_BLOCK0; ++ win_param.high_addr = 0; ++ win_param.base_addr = mv_get_internal_sram_base (); /* Get base addr */ ++ win_param.size = MV64460_INTERNAL_SRAM_SIZE; /* Get bank size */ ++ win_param.enable = 1; /* Enable the access */ ++ win_param.access_ctrl = EWIN_ACCESS_FULL; /* Enable full access */ ++ ++ /* Set the access control for address window (EPAPR) READ & WRITE */ ++ eth_set_access_control (p_eth_port_ctrl->port_num, &win_param); ++ ++ eth_port_init_mac_tables (p_eth_port_ctrl->port_num); ++ ++ ethernet_phy_set (p_eth_port_ctrl->port_num, ++ p_eth_port_ctrl->port_phy_addr); ++ ++ return; ++ ++} ++ ++/******************************************************************************* ++* eth_port_start - Start the Ethernet port activity. ++* ++* DESCRIPTION: ++* This routine prepares the Ethernet port for Rx and Tx activity: ++* 1. Initialize Tx and Rx Current Descriptor Pointer for each queue that ++* has been initialized a descriptor's ring (using ether_init_tx_desc_ring ++* for Tx and ether_init_rx_desc_ring for Rx) ++* 2. Initialize and enable the Ethernet configuration port by writing to ++* the port's configuration and command registers. ++* 3. Initialize and enable the SDMA by writing to the SDMA's ++* configuration and command registers. ++* After completing these steps, the ethernet port SDMA can starts to ++* perform Rx and Tx activities. ++* ++* Note: Each Rx and Tx queue descriptor's list must be initialized prior ++* to calling this function (use ether_init_tx_desc_ring for Tx queues and ++* ether_init_rx_desc_ring for Rx queues). ++* ++* INPUT: ++* ETH_PORT_INFO *p_eth_port_ctrl Ethernet port control struct ++* ++* OUTPUT: ++* Ethernet port is ready to receive and transmit. ++* ++* RETURN: ++* false if the port PHY is not up. ++* true otherwise. ++* ++*******************************************************************************/ ++static bool eth_port_start (ETH_PORT_INFO * p_eth_port_ctrl) ++{ ++ int queue; ++ volatile ETH_TX_DESC *p_tx_curr_desc; ++ volatile ETH_RX_DESC *p_rx_curr_desc; ++ unsigned int phy_reg_data; ++ ETH_PORT eth_port_num = p_eth_port_ctrl->port_num; ++ ++ /* Assignment of Tx CTRP of given queue */ ++ for (queue = 0; queue < MAX_TX_QUEUE_NUM; queue++) { ++ CURR_TFD_GET (p_tx_curr_desc, queue); ++ MV_REG_WRITE ((MV64460_ETH_TX_CURRENT_QUEUE_DESC_PTR_0 ++ (eth_port_num) ++ + (4 * queue)), ++ ((unsigned int) p_tx_curr_desc)); ++ ++ } ++ ++ /* Assignment of Rx CRDP of given queue */ ++ for (queue = 0; queue < MAX_RX_QUEUE_NUM; queue++) { ++ CURR_RFD_GET (p_rx_curr_desc, queue); ++ MV_REG_WRITE ((MV64460_ETH_RX_CURRENT_QUEUE_DESC_PTR_0 ++ (eth_port_num) ++ + (4 * queue)), ++ ((unsigned int) p_rx_curr_desc)); ++ ++ if (p_rx_curr_desc != NULL) ++ /* Add the assigned Ethernet address to the port's address table */ ++ eth_port_uc_addr_set (p_eth_port_ctrl->port_num, ++ p_eth_port_ctrl->port_mac_addr, ++ queue); ++ } ++ ++ /* Assign port configuration and command. */ ++ MV_REG_WRITE (MV64460_ETH_PORT_CONFIG_REG (eth_port_num), ++ p_eth_port_ctrl->port_config); ++ ++ MV_REG_WRITE (MV64460_ETH_PORT_CONFIG_EXTEND_REG (eth_port_num), ++ p_eth_port_ctrl->port_config_extend); ++ ++ MV_REG_WRITE (MV64460_ETH_PORT_SERIAL_CONTROL_REG (eth_port_num), ++ p_eth_port_ctrl->port_serial_control); ++ ++ MV_SET_REG_BITS (MV64460_ETH_PORT_SERIAL_CONTROL_REG (eth_port_num), ++ ETH_SERIAL_PORT_ENABLE); ++ ++ /* Assign port SDMA configuration */ ++ MV_REG_WRITE (MV64460_ETH_SDMA_CONFIG_REG (eth_port_num), ++ p_eth_port_ctrl->port_sdma_config); ++ ++ MV_REG_WRITE (MV64460_ETH_TX_QUEUE_0_TOKEN_BUCKET_COUNT ++ (eth_port_num), 0x3fffffff); ++ MV_REG_WRITE (MV64460_ETH_TX_QUEUE_0_TOKEN_BUCKET_CONFIG ++ (eth_port_num), 0x03fffcff); ++ /* Turn off the port/queue bandwidth limitation */ ++ MV_REG_WRITE (MV64460_ETH_MAXIMUM_TRANSMIT_UNIT (eth_port_num), 0x0); ++ ++ /* Enable port Rx. */ ++ MV_REG_WRITE (MV64460_ETH_RECEIVE_QUEUE_COMMAND_REG (eth_port_num), ++ p_eth_port_ctrl->port_rx_queue_command); ++ ++ /* Check if link is up */ ++ eth_port_read_smi_reg (eth_port_num, 1, &phy_reg_data); ++ ++ if (!(phy_reg_data & 0x20)) ++ return false; ++ ++ return true; ++} ++ ++/******************************************************************************* ++* eth_port_uc_addr_set - This function Set the port Unicast address. ++* ++* DESCRIPTION: ++* This function Set the port Ethernet MAC address. ++* ++* INPUT: ++* ETH_PORT eth_port_num Port number. ++* char * p_addr Address to be set ++* ETH_QUEUE queue Rx queue number for this MAC address. ++* ++* OUTPUT: ++* Set MAC address low and high registers. also calls eth_port_uc_addr() ++* To set the unicast table with the proper information. ++* ++* RETURN: ++* N/A. ++* ++*******************************************************************************/ ++static void eth_port_uc_addr_set (ETH_PORT eth_port_num, ++ unsigned char *p_addr, ETH_QUEUE queue) ++{ ++ unsigned int mac_h; ++ unsigned int mac_l; ++ ++ mac_l = (p_addr[4] << 8) | (p_addr[5]); ++ mac_h = (p_addr[0] << 24) | (p_addr[1] << 16) | ++ (p_addr[2] << 8) | (p_addr[3] << 0); ++ ++ MV_REG_WRITE (MV64460_ETH_MAC_ADDR_LOW (eth_port_num), mac_l); ++ MV_REG_WRITE (MV64460_ETH_MAC_ADDR_HIGH (eth_port_num), mac_h); ++ ++ /* Accept frames of this address */ ++ eth_port_uc_addr (eth_port_num, p_addr[5], queue, ACCEPT_MAC_ADDR); ++ ++ return; ++} ++ ++/******************************************************************************* ++* eth_port_uc_addr - This function Set the port unicast address table ++* ++* DESCRIPTION: ++* This function locates the proper entry in the Unicast table for the ++* specified MAC nibble and sets its properties according to function ++* parameters. ++* ++* INPUT: ++* ETH_PORT eth_port_num Port number. ++* unsigned char uc_nibble Unicast MAC Address last nibble. ++* ETH_QUEUE queue Rx queue number for this MAC address. ++* int option 0 = Add, 1 = remove address. ++* ++* OUTPUT: ++* This function add/removes MAC addresses from the port unicast address ++* table. ++* ++* RETURN: ++* true is output succeeded. ++* false if option parameter is invalid. ++* ++*******************************************************************************/ ++static bool eth_port_uc_addr (ETH_PORT eth_port_num, ++ unsigned char uc_nibble, ++ ETH_QUEUE queue, int option) ++{ ++ unsigned int unicast_reg; ++ unsigned int tbl_offset; ++ unsigned int reg_offset; ++ ++ /* Locate the Unicast table entry */ ++ uc_nibble = (0xf & uc_nibble); ++ tbl_offset = (uc_nibble / 4) * 4; /* Register offset from unicast table base */ ++ reg_offset = uc_nibble % 4; /* Entry offset within the above register */ ++ ++ switch (option) { ++ case REJECT_MAC_ADDR: ++ /* Clear accepts frame bit at specified unicast DA table entry */ ++ unicast_reg = ++ MV_REG_READ ((MV64460_ETH_DA_FILTER_UNICAST_TABLE_BASE ++ (eth_port_num) ++ + tbl_offset)); ++ ++ unicast_reg &= (0x0E << (8 * reg_offset)); ++ ++ MV_REG_WRITE ((MV64460_ETH_DA_FILTER_UNICAST_TABLE_BASE ++ (eth_port_num) ++ + tbl_offset), unicast_reg); ++ break; ++ ++ case ACCEPT_MAC_ADDR: ++ /* Set accepts frame bit at unicast DA filter table entry */ ++ unicast_reg = ++ MV_REG_READ ((MV64460_ETH_DA_FILTER_UNICAST_TABLE_BASE ++ (eth_port_num) ++ + tbl_offset)); ++ ++ unicast_reg |= ((0x01 | queue) << (8 * reg_offset)); ++ ++ MV_REG_WRITE ((MV64460_ETH_DA_FILTER_UNICAST_TABLE_BASE ++ (eth_port_num) ++ + tbl_offset), unicast_reg); ++ ++ break; ++ ++ default: ++ return false; ++ } ++ return true; ++} ++ ++#if 0 /* FIXME */ ++/******************************************************************************* ++* eth_port_mc_addr - Multicast address settings. ++* ++* DESCRIPTION: ++* This API controls the MV device MAC multicast support. ++* The MV device supports multicast using two tables: ++* 1) Special Multicast Table for MAC addresses of the form ++* 0x01-00-5E-00-00-XX (where XX is between 0x00 and 0x_fF). ++* The MAC DA[7:0] bits are used as a pointer to the Special Multicast ++* Table entries in the DA-Filter table. ++* In this case, the function calls eth_port_smc_addr() routine to set the ++* Special Multicast Table. ++* 2) Other Multicast Table for multicast of another type. A CRC-8bit ++* is used as an index to the Other Multicast Table entries in the ++* DA-Filter table. ++* In this case, the function calculates the CRC-8bit value and calls ++* eth_port_omc_addr() routine to set the Other Multicast Table. ++* INPUT: ++* ETH_PORT eth_port_num Port number. ++* unsigned char *p_addr Unicast MAC Address. ++* ETH_QUEUE queue Rx queue number for this MAC address. ++* int option 0 = Add, 1 = remove address. ++* ++* OUTPUT: ++* See description. ++* ++* RETURN: ++* true is output succeeded. ++* false if add_address_table_entry( ) failed. ++* ++*******************************************************************************/ ++static void eth_port_mc_addr (ETH_PORT eth_port_num, ++ unsigned char *p_addr, ++ ETH_QUEUE queue, int option) ++{ ++ unsigned int mac_h; ++ unsigned int mac_l; ++ unsigned char crc_result = 0; ++ int mac_array[48]; ++ int crc[8]; ++ int i; ++ ++ if ((p_addr[0] == 0x01) && ++ (p_addr[1] == 0x00) && ++ (p_addr[2] == 0x5E) && (p_addr[3] == 0x00) && (p_addr[4] == 0x00)) { ++ ++ eth_port_smc_addr (eth_port_num, p_addr[5], queue, option); ++ } else { ++ /* Calculate CRC-8 out of the given address */ ++ mac_h = (p_addr[0] << 8) | (p_addr[1]); ++ mac_l = (p_addr[2] << 24) | (p_addr[3] << 16) | ++ (p_addr[4] << 8) | (p_addr[5] << 0); ++ ++ for (i = 0; i < 32; i++) ++ mac_array[i] = (mac_l >> i) & 0x1; ++ for (i = 32; i < 48; i++) ++ mac_array[i] = (mac_h >> (i - 32)) & 0x1; ++ ++ crc[0] = mac_array[45] ^ mac_array[43] ^ mac_array[40] ^ ++ mac_array[39] ^ mac_array[35] ^ mac_array[34] ^ ++ mac_array[31] ^ mac_array[30] ^ mac_array[28] ^ ++ mac_array[23] ^ mac_array[21] ^ mac_array[19] ^ ++ mac_array[18] ^ mac_array[16] ^ mac_array[14] ^ ++ mac_array[12] ^ mac_array[8] ^ mac_array[7] ^ ++ mac_array[6] ^ mac_array[0]; ++ ++ crc[1] = mac_array[46] ^ mac_array[45] ^ mac_array[44] ^ ++ mac_array[43] ^ mac_array[41] ^ mac_array[39] ^ ++ mac_array[36] ^ mac_array[34] ^ mac_array[32] ^ ++ mac_array[30] ^ mac_array[29] ^ mac_array[28] ^ ++ mac_array[24] ^ mac_array[23] ^ mac_array[22] ^ ++ mac_array[21] ^ mac_array[20] ^ mac_array[18] ^ ++ mac_array[17] ^ mac_array[16] ^ mac_array[15] ^ ++ mac_array[14] ^ mac_array[13] ^ mac_array[12] ^ ++ mac_array[9] ^ mac_array[6] ^ mac_array[1] ^ ++ mac_array[0]; ++ ++ crc[2] = mac_array[47] ^ mac_array[46] ^ mac_array[44] ^ ++ mac_array[43] ^ mac_array[42] ^ mac_array[39] ^ ++ mac_array[37] ^ mac_array[34] ^ mac_array[33] ^ ++ mac_array[29] ^ mac_array[28] ^ mac_array[25] ^ ++ mac_array[24] ^ mac_array[22] ^ mac_array[17] ^ ++ mac_array[15] ^ mac_array[13] ^ mac_array[12] ^ ++ mac_array[10] ^ mac_array[8] ^ mac_array[6] ^ ++ mac_array[2] ^ mac_array[1] ^ mac_array[0]; ++ ++ crc[3] = mac_array[47] ^ mac_array[45] ^ mac_array[44] ^ ++ mac_array[43] ^ mac_array[40] ^ mac_array[38] ^ ++ mac_array[35] ^ mac_array[34] ^ mac_array[30] ^ ++ mac_array[29] ^ mac_array[26] ^ mac_array[25] ^ ++ mac_array[23] ^ mac_array[18] ^ mac_array[16] ^ ++ mac_array[14] ^ mac_array[13] ^ mac_array[11] ^ ++ mac_array[9] ^ mac_array[7] ^ mac_array[3] ^ ++ mac_array[2] ^ mac_array[1]; ++ ++ crc[4] = mac_array[46] ^ mac_array[45] ^ mac_array[44] ^ ++ mac_array[41] ^ mac_array[39] ^ mac_array[36] ^ ++ mac_array[35] ^ mac_array[31] ^ mac_array[30] ^ ++ mac_array[27] ^ mac_array[26] ^ mac_array[24] ^ ++ mac_array[19] ^ mac_array[17] ^ mac_array[15] ^ ++ mac_array[14] ^ mac_array[12] ^ mac_array[10] ^ ++ mac_array[8] ^ mac_array[4] ^ mac_array[3] ^ ++ mac_array[2]; ++ ++ crc[5] = mac_array[47] ^ mac_array[46] ^ mac_array[45] ^ ++ mac_array[42] ^ mac_array[40] ^ mac_array[37] ^ ++ mac_array[36] ^ mac_array[32] ^ mac_array[31] ^ ++ mac_array[28] ^ mac_array[27] ^ mac_array[25] ^ ++ mac_array[20] ^ mac_array[18] ^ mac_array[16] ^ ++ mac_array[15] ^ mac_array[13] ^ mac_array[11] ^ ++ mac_array[9] ^ mac_array[5] ^ mac_array[4] ^ ++ mac_array[3]; ++ ++ crc[6] = mac_array[47] ^ mac_array[46] ^ mac_array[43] ^ ++ mac_array[41] ^ mac_array[38] ^ mac_array[37] ^ ++ mac_array[33] ^ mac_array[32] ^ mac_array[29] ^ ++ mac_array[28] ^ mac_array[26] ^ mac_array[21] ^ ++ mac_array[19] ^ mac_array[17] ^ mac_array[16] ^ ++ mac_array[14] ^ mac_array[12] ^ mac_array[10] ^ ++ mac_array[6] ^ mac_array[5] ^ mac_array[4]; ++ ++ crc[7] = mac_array[47] ^ mac_array[44] ^ mac_array[42] ^ ++ mac_array[39] ^ mac_array[38] ^ mac_array[34] ^ ++ mac_array[33] ^ mac_array[30] ^ mac_array[29] ^ ++ mac_array[27] ^ mac_array[22] ^ mac_array[20] ^ ++ mac_array[18] ^ mac_array[17] ^ mac_array[15] ^ ++ mac_array[13] ^ mac_array[11] ^ mac_array[7] ^ ++ mac_array[6] ^ mac_array[5]; ++ ++ for (i = 0; i < 8; i++) ++ crc_result = crc_result | (crc[i] << i); ++ ++ eth_port_omc_addr (eth_port_num, crc_result, queue, option); ++ } ++ return; ++} ++ ++/******************************************************************************* ++* eth_port_smc_addr - Special Multicast address settings. ++* ++* DESCRIPTION: ++* This routine controls the MV device special MAC multicast support. ++* The Special Multicast Table for MAC addresses supports MAC of the form ++* 0x01-00-5E-00-00-XX (where XX is between 0x00 and 0x_fF). ++* The MAC DA[7:0] bits are used as a pointer to the Special Multicast ++* Table entries in the DA-Filter table. ++* This function set the Special Multicast Table appropriate entry ++* according to the argument given. ++* ++* INPUT: ++* ETH_PORT eth_port_num Port number. ++* unsigned char mc_byte Multicast addr last byte (MAC DA[7:0] bits). ++* ETH_QUEUE queue Rx queue number for this MAC address. ++* int option 0 = Add, 1 = remove address. ++* ++* OUTPUT: ++* See description. ++* ++* RETURN: ++* true is output succeeded. ++* false if option parameter is invalid. ++* ++*******************************************************************************/ ++static bool eth_port_smc_addr (ETH_PORT eth_port_num, ++ unsigned char mc_byte, ++ ETH_QUEUE queue, int option) ++{ ++ unsigned int smc_table_reg; ++ unsigned int tbl_offset; ++ unsigned int reg_offset; ++ ++ /* Locate the SMC table entry */ ++ tbl_offset = (mc_byte / 4) * 4; /* Register offset from SMC table base */ ++ reg_offset = mc_byte % 4; /* Entry offset within the above register */ ++ queue &= 0x7; ++ ++ switch (option) { ++ case REJECT_MAC_ADDR: ++ /* Clear accepts frame bit at specified Special DA table entry */ ++ smc_table_reg = ++ MV_REG_READ ((MV64460_ETH_DA_FILTER_SPECIAL_MULTICAST_TABLE_BASE (eth_port_num) + tbl_offset)); ++ smc_table_reg &= (0x0E << (8 * reg_offset)); ++ ++ MV_REG_WRITE ((MV64460_ETH_DA_FILTER_SPECIAL_MULTICAST_TABLE_BASE (eth_port_num) + tbl_offset), smc_table_reg); ++ break; ++ ++ case ACCEPT_MAC_ADDR: ++ /* Set accepts frame bit at specified Special DA table entry */ ++ smc_table_reg = ++ MV_REG_READ ((MV64460_ETH_DA_FILTER_SPECIAL_MULTICAST_TABLE_BASE (eth_port_num) + tbl_offset)); ++ smc_table_reg |= ((0x01 | queue) << (8 * reg_offset)); ++ ++ MV_REG_WRITE ((MV64460_ETH_DA_FILTER_SPECIAL_MULTICAST_TABLE_BASE (eth_port_num) + tbl_offset), smc_table_reg); ++ break; ++ ++ default: ++ return false; ++ } ++ return true; ++} ++ ++/******************************************************************************* ++* eth_port_omc_addr - Multicast address settings. ++* ++* DESCRIPTION: ++* This routine controls the MV device Other MAC multicast support. ++* The Other Multicast Table is used for multicast of another type. ++* A CRC-8bit is used as an index to the Other Multicast Table entries ++* in the DA-Filter table. ++* The function gets the CRC-8bit value from the calling routine and ++* set the Other Multicast Table appropriate entry according to the ++* CRC-8 argument given. ++* ++* INPUT: ++* ETH_PORT eth_port_num Port number. ++* unsigned char crc8 A CRC-8bit (Polynomial: x^8+x^2+x^1+1). ++* ETH_QUEUE queue Rx queue number for this MAC address. ++* int option 0 = Add, 1 = remove address. ++* ++* OUTPUT: ++* See description. ++* ++* RETURN: ++* true is output succeeded. ++* false if option parameter is invalid. ++* ++*******************************************************************************/ ++static bool eth_port_omc_addr (ETH_PORT eth_port_num, ++ unsigned char crc8, ++ ETH_QUEUE queue, int option) ++{ ++ unsigned int omc_table_reg; ++ unsigned int tbl_offset; ++ unsigned int reg_offset; ++ ++ /* Locate the OMC table entry */ ++ tbl_offset = (crc8 / 4) * 4; /* Register offset from OMC table base */ ++ reg_offset = crc8 % 4; /* Entry offset within the above register */ ++ queue &= 0x7; ++ ++ switch (option) { ++ case REJECT_MAC_ADDR: ++ /* Clear accepts frame bit at specified Other DA table entry */ ++ omc_table_reg = ++ MV_REG_READ ((MV64460_ETH_DA_FILTER_OTHER_MULTICAST_TABLE_BASE (eth_port_num) + tbl_offset)); ++ omc_table_reg &= (0x0E << (8 * reg_offset)); ++ ++ MV_REG_WRITE ((MV64460_ETH_DA_FILTER_OTHER_MULTICAST_TABLE_BASE (eth_port_num) + tbl_offset), omc_table_reg); ++ break; ++ ++ case ACCEPT_MAC_ADDR: ++ /* Set accepts frame bit at specified Other DA table entry */ ++ omc_table_reg = ++ MV_REG_READ ((MV64460_ETH_DA_FILTER_OTHER_MULTICAST_TABLE_BASE (eth_port_num) + tbl_offset)); ++ omc_table_reg |= ((0x01 | queue) << (8 * reg_offset)); ++ ++ MV_REG_WRITE ((MV64460_ETH_DA_FILTER_OTHER_MULTICAST_TABLE_BASE (eth_port_num) + tbl_offset), omc_table_reg); ++ break; ++ ++ default: ++ return false; ++ } ++ return true; ++} ++#endif ++ ++/******************************************************************************* ++* eth_port_init_mac_tables - Clear all entrance in the UC, SMC and OMC tables ++* ++* DESCRIPTION: ++* Go through all the DA filter tables (Unicast, Special Multicast & Other ++* Multicast) and set each entry to 0. ++* ++* INPUT: ++* ETH_PORT eth_port_num Ethernet Port number. See ETH_PORT enum. ++* ++* OUTPUT: ++* Multicast and Unicast packets are rejected. ++* ++* RETURN: ++* None. ++* ++*******************************************************************************/ ++static void eth_port_init_mac_tables (ETH_PORT eth_port_num) ++{ ++ int table_index; ++ ++ /* Clear DA filter unicast table (Ex_dFUT) */ ++ for (table_index = 0; table_index <= 0xC; table_index += 4) ++ MV_REG_WRITE ((MV64460_ETH_DA_FILTER_UNICAST_TABLE_BASE ++ (eth_port_num) + table_index), 0); ++ ++ for (table_index = 0; table_index <= 0xFC; table_index += 4) { ++ /* Clear DA filter special multicast table (Ex_dFSMT) */ ++ MV_REG_WRITE ((MV64460_ETH_DA_FILTER_SPECIAL_MULTICAST_TABLE_BASE (eth_port_num) + table_index), 0); ++ /* Clear DA filter other multicast table (Ex_dFOMT) */ ++ MV_REG_WRITE ((MV64460_ETH_DA_FILTER_OTHER_MULTICAST_TABLE_BASE (eth_port_num) + table_index), 0); ++ } ++} ++ ++/******************************************************************************* ++* eth_clear_mib_counters - Clear all MIB counters ++* ++* DESCRIPTION: ++* This function clears all MIB counters of a specific ethernet port. ++* A read from the MIB counter will reset the counter. ++* ++* INPUT: ++* ETH_PORT eth_port_num Ethernet Port number. See ETH_PORT enum. ++* ++* OUTPUT: ++* After reading all MIB counters, the counters resets. ++* ++* RETURN: ++* MIB counter value. ++* ++*******************************************************************************/ ++static void eth_clear_mib_counters (ETH_PORT eth_port_num) ++{ ++ int i; ++ unsigned int dummy; ++ ++ /* Perform dummy reads from MIB counters */ ++ for (i = ETH_MIB_GOOD_OCTETS_RECEIVED_LOW; i < ETH_MIB_LATE_COLLISION; ++ i += 4) ++ dummy = MV_REG_READ ((MV64460_ETH_MIB_COUNTERS_BASE ++ (eth_port_num) + i)); ++ ++ return; ++} ++ ++/******************************************************************************* ++* eth_read_mib_counter - Read a MIB counter ++* ++* DESCRIPTION: ++* This function reads a MIB counter of a specific ethernet port. ++* NOTE - If read from ETH_MIB_GOOD_OCTETS_RECEIVED_LOW, then the ++* following read must be from ETH_MIB_GOOD_OCTETS_RECEIVED_HIGH ++* register. The same applies for ETH_MIB_GOOD_OCTETS_SENT_LOW and ++* ETH_MIB_GOOD_OCTETS_SENT_HIGH ++* ++* INPUT: ++* ETH_PORT eth_port_num Ethernet Port number. See ETH_PORT enum. ++* unsigned int mib_offset MIB counter offset (use ETH_MIB_... macros). ++* ++* OUTPUT: ++* After reading the MIB counter, the counter resets. ++* ++* RETURN: ++* MIB counter value. ++* ++*******************************************************************************/ ++unsigned int eth_read_mib_counter (ETH_PORT eth_port_num, ++ unsigned int mib_offset) ++{ ++ return (MV_REG_READ (MV64460_ETH_MIB_COUNTERS_BASE (eth_port_num) ++ + mib_offset)); ++} ++ ++/******************************************************************************* ++* ethernet_phy_set - Set the ethernet port PHY address. ++* ++* DESCRIPTION: ++* This routine set the ethernet port PHY address according to given ++* parameter. ++* ++* INPUT: ++* ETH_PORT eth_port_num Ethernet Port number. See ETH_PORT enum. ++* ++* OUTPUT: ++* Set PHY Address Register with given PHY address parameter. ++* ++* RETURN: ++* None. ++* ++*******************************************************************************/ ++static void ethernet_phy_set (ETH_PORT eth_port_num, int phy_addr) ++{ ++ unsigned int reg_data; ++ ++ reg_data = MV_REG_READ (MV64460_ETH_PHY_ADDR_REG); ++ ++ reg_data &= ~(0x1F << (5 * eth_port_num)); ++ reg_data |= (phy_addr << (5 * eth_port_num)); ++ ++ MV_REG_WRITE (MV64460_ETH_PHY_ADDR_REG, reg_data); ++ ++ return; ++} ++ ++/******************************************************************************* ++ * ethernet_phy_get - Get the ethernet port PHY address. ++ * ++ * DESCRIPTION: ++ * This routine returns the given ethernet port PHY address. ++ * ++ * INPUT: ++ * ETH_PORT eth_port_num Ethernet Port number. See ETH_PORT enum. ++ * ++ * OUTPUT: ++ * None. ++ * ++ * RETURN: ++ * PHY address. ++ * ++ *******************************************************************************/ ++static int ethernet_phy_get (ETH_PORT eth_port_num) ++{ ++ unsigned int reg_data; ++ ++ reg_data = MV_REG_READ (MV64460_ETH_PHY_ADDR_REG); ++ ++ return ((reg_data >> (5 * eth_port_num)) & 0x1f); ++} ++ ++/***********************************************************/ ++/* (Re)start autonegotiation */ ++/***********************************************************/ ++int phy_setup_aneg (char *devname, unsigned char addr) ++{ ++ unsigned short ctl, adv; ++ ++ /* Setup standard advertise */ ++ miiphy_read (devname, addr, PHY_ANAR, &adv); ++ adv |= (PHY_ANLPAR_ACK | PHY_ANLPAR_RF | PHY_ANLPAR_T4 | ++ PHY_ANLPAR_TXFD | PHY_ANLPAR_TX | PHY_ANLPAR_10FD | ++ PHY_ANLPAR_10); ++ miiphy_write (devname, addr, PHY_ANAR, adv); ++ ++ miiphy_read (devname, addr, PHY_1000BTCR, &adv); ++ adv |= (0x0300); ++ miiphy_write (devname, addr, PHY_1000BTCR, adv); ++ ++ /* Start/Restart aneg */ ++ miiphy_read (devname, addr, PHY_BMCR, &ctl); ++ ctl |= (PHY_BMCR_AUTON | PHY_BMCR_RST_NEG); ++ miiphy_write (devname, addr, PHY_BMCR, ctl); ++ ++ return 0; ++} ++ ++/******************************************************************************* ++ * ethernet_phy_reset - Reset Ethernet port PHY. ++ * ++ * DESCRIPTION: ++ * This routine utilize the SMI interface to reset the ethernet port PHY. ++ * The routine waits until the link is up again or link up is timeout. ++ * ++ * INPUT: ++ * ETH_PORT eth_port_num Ethernet Port number. See ETH_PORT enum. ++ * ++ * OUTPUT: ++ * The ethernet port PHY renew its link. ++ * ++ * RETURN: ++ * None. ++ * ++ *******************************************************************************/ ++static bool ethernet_phy_reset (ETH_PORT eth_port_num) ++{ ++ unsigned int time_out = 50; ++ unsigned int phy_reg_data; ++ ++ eth_port_read_smi_reg (eth_port_num, 20, &phy_reg_data); ++ phy_reg_data |= 0x0083; /* Set bit 7 to 1 for different RGMII timing */ ++ eth_port_write_smi_reg (eth_port_num, 20, phy_reg_data); ++ ++ /* Reset the PHY */ ++ eth_port_read_smi_reg (eth_port_num, 0, &phy_reg_data); ++ phy_reg_data |= 0x8000; /* Set bit 15 to reset the PHY */ ++ eth_port_write_smi_reg (eth_port_num, 0, phy_reg_data); ++ ++ /* Poll on the PHY LINK */ ++ do { ++ eth_port_read_smi_reg (eth_port_num, 1, &phy_reg_data); ++ ++ if (time_out-- == 0) ++ return false; ++ } ++ while (!(phy_reg_data & 0x20)); ++ ++ return true; ++} ++ ++/******************************************************************************* ++ * eth_port_reset - Reset Ethernet port ++ * ++ * DESCRIPTION: ++ * This routine resets the chip by aborting any SDMA engine activity and ++ * clearing the MIB counters. The Receiver and the Transmit unit are in ++ * idle state after this command is performed and the port is disabled. ++ * ++ * INPUT: ++ * ETH_PORT eth_port_num Ethernet Port number. See ETH_PORT enum. ++ * ++ * OUTPUT: ++ * Channel activity is halted. ++ * ++ * RETURN: ++ * None. ++ * ++ *******************************************************************************/ ++static void eth_port_reset (ETH_PORT eth_port_num) ++{ ++ unsigned int reg_data; ++ ++ /* Stop Tx port activity. Check port Tx activity. */ ++ reg_data = ++ MV_REG_READ (MV64460_ETH_TRANSMIT_QUEUE_COMMAND_REG ++ (eth_port_num)); ++ ++ if (reg_data & 0xFF) { ++ /* Issue stop command for active channels only */ ++ MV_REG_WRITE (MV64460_ETH_TRANSMIT_QUEUE_COMMAND_REG ++ (eth_port_num), (reg_data << 8)); ++ ++ /* Wait for all Tx activity to terminate. */ ++ do { ++ /* Check port cause register that all Tx queues are stopped */ ++ reg_data = ++ MV_REG_READ ++ (MV64460_ETH_TRANSMIT_QUEUE_COMMAND_REG ++ (eth_port_num)); ++ } ++ while (reg_data & 0xFF); ++ } ++ ++ /* Stop Rx port activity. Check port Rx activity. */ ++ reg_data = ++ MV_REG_READ (MV64460_ETH_RECEIVE_QUEUE_COMMAND_REG ++ (eth_port_num)); ++ ++ if (reg_data & 0xFF) { ++ /* Issue stop command for active channels only */ ++ MV_REG_WRITE (MV64460_ETH_RECEIVE_QUEUE_COMMAND_REG ++ (eth_port_num), (reg_data << 8)); ++ ++ /* Wait for all Rx activity to terminate. */ ++ do { ++ /* Check port cause register that all Rx queues are stopped */ ++ reg_data = ++ MV_REG_READ ++ (MV64460_ETH_RECEIVE_QUEUE_COMMAND_REG ++ (eth_port_num)); ++ } ++ while (reg_data & 0xFF); ++ } ++ ++ /* Clear all MIB counters */ ++ eth_clear_mib_counters (eth_port_num); ++ ++ /* Reset the Enable bit in the Configuration Register */ ++ reg_data = ++ MV_REG_READ (MV64460_ETH_PORT_SERIAL_CONTROL_REG ++ (eth_port_num)); ++ reg_data &= ~ETH_SERIAL_PORT_ENABLE; ++ MV_REG_WRITE (MV64460_ETH_PORT_SERIAL_CONTROL_REG (eth_port_num), ++ reg_data); ++ ++ return; ++} ++ ++#if 0 /* Not needed here */ ++/******************************************************************************* ++ * ethernet_set_config_reg - Set specified bits in configuration register. ++ * ++ * DESCRIPTION: ++ * This function sets specified bits in the given ethernet ++ * configuration register. ++ * ++ * INPUT: ++ * ETH_PORT eth_port_num Ethernet Port number. See ETH_PORT enum. ++ * unsigned int value 32 bit value. ++ * ++ * OUTPUT: ++ * The set bits in the value parameter are set in the configuration ++ * register. ++ * ++ * RETURN: ++ * None. ++ * ++ *******************************************************************************/ ++static void ethernet_set_config_reg (ETH_PORT eth_port_num, ++ unsigned int value) ++{ ++ unsigned int eth_config_reg; ++ ++ eth_config_reg = ++ MV_REG_READ (MV64460_ETH_PORT_CONFIG_REG (eth_port_num)); ++ eth_config_reg |= value; ++ MV_REG_WRITE (MV64460_ETH_PORT_CONFIG_REG (eth_port_num), ++ eth_config_reg); ++ ++ return; ++} ++#endif ++ ++#if 0 /* FIXME */ ++/******************************************************************************* ++ * ethernet_reset_config_reg - Reset specified bits in configuration register. ++ * ++ * DESCRIPTION: ++ * This function resets specified bits in the given Ethernet ++ * configuration register. ++ * ++ * INPUT: ++ * ETH_PORT eth_port_num Ethernet Port number. See ETH_PORT enum. ++ * unsigned int value 32 bit value. ++ * ++ * OUTPUT: ++ * The set bits in the value parameter are reset in the configuration ++ * register. ++ * ++ * RETURN: ++ * None. ++ * ++ *******************************************************************************/ ++static void ethernet_reset_config_reg (ETH_PORT eth_port_num, ++ unsigned int value) ++{ ++ unsigned int eth_config_reg; ++ ++ eth_config_reg = MV_REG_READ (MV64460_ETH_PORT_CONFIG_EXTEND_REG ++ (eth_port_num)); ++ eth_config_reg &= ~value; ++ MV_REG_WRITE (MV64460_ETH_PORT_CONFIG_EXTEND_REG (eth_port_num), ++ eth_config_reg); ++ ++ return; ++} ++#endif ++ ++#if 0 /* Not needed here */ ++/******************************************************************************* ++ * ethernet_get_config_reg - Get the port configuration register ++ * ++ * DESCRIPTION: ++ * This function returns the configuration register value of the given ++ * ethernet port. ++ * ++ * INPUT: ++ * ETH_PORT eth_port_num Ethernet Port number. See ETH_PORT enum. ++ * ++ * OUTPUT: ++ * None. ++ * ++ * RETURN: ++ * Port configuration register value. ++ * ++ *******************************************************************************/ ++static unsigned int ethernet_get_config_reg (ETH_PORT eth_port_num) ++{ ++ unsigned int eth_config_reg; ++ ++ eth_config_reg = MV_REG_READ (MV64460_ETH_PORT_CONFIG_EXTEND_REG ++ (eth_port_num)); ++ return eth_config_reg; ++} ++ ++#endif ++ ++/******************************************************************************* ++ * eth_port_read_smi_reg - Read PHY registers ++ * ++ * DESCRIPTION: ++ * This routine utilize the SMI interface to interact with the PHY in ++ * order to perform PHY register read. ++ * ++ * INPUT: ++ * ETH_PORT eth_port_num Ethernet Port number. See ETH_PORT enum. ++ * unsigned int phy_reg PHY register address offset. ++ * unsigned int *value Register value buffer. ++ * ++ * OUTPUT: ++ * Write the value of a specified PHY register into given buffer. ++ * ++ * RETURN: ++ * false if the PHY is busy or read data is not in valid state. ++ * true otherwise. ++ * ++ *******************************************************************************/ ++static bool eth_port_read_smi_reg (ETH_PORT eth_port_num, ++ unsigned int phy_reg, unsigned int *value) ++{ ++ unsigned int reg_value; ++ unsigned int time_out = PHY_BUSY_TIMEOUT; ++ int phy_addr; ++ ++ phy_addr = ethernet_phy_get (eth_port_num); ++ ++ /* first check that it is not busy */ ++ do { ++ reg_value = MV_REG_READ (MV64460_ETH_SMI_REG); ++ if (time_out-- == 0) { ++ return false; ++ } ++ } ++ while (reg_value & ETH_SMI_BUSY); ++ ++ /* not busy */ ++ ++ MV_REG_WRITE (MV64460_ETH_SMI_REG, ++ (phy_addr << 16) | (phy_reg << 21) | ++ ETH_SMI_OPCODE_READ); ++ ++ time_out = PHY_BUSY_TIMEOUT; /* initialize the time out var again */ ++ ++ do { ++ reg_value = MV_REG_READ (MV64460_ETH_SMI_REG); ++ if (time_out-- == 0) { ++ return false; ++ } ++ } ++ while ((reg_value & ETH_SMI_READ_VALID) != ETH_SMI_READ_VALID); /* Bit set equ operation done */ ++ ++ /* Wait for the data to update in the SMI register */ ++#define PHY_UPDATE_TIMEOUT 10000 ++ for (time_out = 0; time_out < PHY_UPDATE_TIMEOUT; time_out++); ++ ++ reg_value = MV_REG_READ (MV64460_ETH_SMI_REG); ++ ++ *value = reg_value & 0xffff; ++ ++ return true; ++} ++ ++int mv_miiphy_read(char *devname, unsigned char phy_addr, ++ unsigned char phy_reg, unsigned short *value) ++{ ++ unsigned int reg_value; ++ unsigned int time_out = PHY_BUSY_TIMEOUT; ++ ++ /* first check that it is not busy */ ++ do { ++ reg_value = MV_REG_READ (MV64460_ETH_SMI_REG); ++ if (time_out-- == 0) { ++ return false; ++ } ++ } ++ while (reg_value & ETH_SMI_BUSY); ++ ++ /* not busy */ ++ MV_REG_WRITE (MV64460_ETH_SMI_REG, ++ (phy_addr << 16) | (phy_reg << 21) | ++ ETH_SMI_OPCODE_READ); ++ ++ time_out = PHY_BUSY_TIMEOUT; /* initialize the time out var again */ ++ ++ do { ++ reg_value = MV_REG_READ (MV64460_ETH_SMI_REG); ++ if (time_out-- == 0) { ++ return false; ++ } ++ } ++ while ((reg_value & ETH_SMI_READ_VALID) != ETH_SMI_READ_VALID); /* Bit set equ operation done */ ++ ++ /* Wait for the data to update in the SMI register */ ++ for (time_out = 0; time_out < PHY_UPDATE_TIMEOUT; time_out++); ++ ++ reg_value = MV_REG_READ (MV64460_ETH_SMI_REG); ++ ++ *value = reg_value & 0xffff; ++ ++ return 0; ++} ++ ++/******************************************************************************* ++ * eth_port_write_smi_reg - Write to PHY registers ++ * ++ * DESCRIPTION: ++ * This routine utilize the SMI interface to interact with the PHY in ++ * order to perform writes to PHY registers. ++ * ++ * INPUT: ++ * ETH_PORT eth_port_num Ethernet Port number. See ETH_PORT enum. ++ * unsigned int phy_reg PHY register address offset. ++ * unsigned int value Register value. ++ * ++ * OUTPUT: ++ * Write the given value to the specified PHY register. ++ * ++ * RETURN: ++ * false if the PHY is busy. ++ * true otherwise. ++ * ++ *******************************************************************************/ ++static bool eth_port_write_smi_reg (ETH_PORT eth_port_num, ++ unsigned int phy_reg, unsigned int value) ++{ ++ unsigned int reg_value; ++ unsigned int time_out = PHY_BUSY_TIMEOUT; ++ int phy_addr; ++ ++ phy_addr = ethernet_phy_get (eth_port_num); ++ ++ /* first check that it is not busy */ ++ do { ++ reg_value = MV_REG_READ (MV64460_ETH_SMI_REG); ++ if (time_out-- == 0) { ++ return false; ++ } ++ } ++ while (reg_value & ETH_SMI_BUSY); ++ ++ /* not busy */ ++ MV_REG_WRITE (MV64460_ETH_SMI_REG, ++ (phy_addr << 16) | (phy_reg << 21) | ++ ETH_SMI_OPCODE_WRITE | (value & 0xffff)); ++ return true; ++} ++ ++int mv_miiphy_write(char *devname, unsigned char phy_addr, ++ unsigned char phy_reg, unsigned short value) ++{ ++ unsigned int reg_value; ++ unsigned int time_out = PHY_BUSY_TIMEOUT; ++ ++ /* first check that it is not busy */ ++ do { ++ reg_value = MV_REG_READ (MV64460_ETH_SMI_REG); ++ if (time_out-- == 0) { ++ return false; ++ } ++ } ++ while (reg_value & ETH_SMI_BUSY); ++ ++ /* not busy */ ++ MV_REG_WRITE (MV64460_ETH_SMI_REG, ++ (phy_addr << 16) | (phy_reg << 21) | ++ ETH_SMI_OPCODE_WRITE | (value & 0xffff)); ++ return 0; ++} ++ ++/******************************************************************************* ++ * eth_set_access_control - Config address decode parameters for Ethernet unit ++ * ++ * DESCRIPTION: ++ * This function configures the address decode parameters for the Gigabit ++ * Ethernet Controller according the given parameters struct. ++ * ++ * INPUT: ++ * ETH_PORT eth_port_num Ethernet Port number. See ETH_PORT enum. ++ * ETH_WIN_PARAM *param Address decode parameter struct. ++ * ++ * OUTPUT: ++ * An access window is opened using the given access parameters. ++ * ++ * RETURN: ++ * None. ++ * ++ *******************************************************************************/ ++static void eth_set_access_control (ETH_PORT eth_port_num, ++ ETH_WIN_PARAM * param) ++{ ++ unsigned int access_prot_reg; ++ ++ /* Set access control register */ ++ access_prot_reg = MV_REG_READ (MV64460_ETH_ACCESS_PROTECTION_REG ++ (eth_port_num)); ++ access_prot_reg &= (~(3 << (param->win * 2))); /* clear window permission */ ++ access_prot_reg |= (param->access_ctrl << (param->win * 2)); ++ MV_REG_WRITE (MV64460_ETH_ACCESS_PROTECTION_REG (eth_port_num), ++ access_prot_reg); ++ ++ /* Set window Size reg (SR) */ ++ MV_REG_WRITE ((MV64460_ETH_SIZE_REG_0 + ++ (ETH_SIZE_REG_GAP * param->win)), ++ (((param->size / 0x10000) - 1) << 16)); ++ ++ /* Set window Base address reg (BA) */ ++ MV_REG_WRITE ((MV64460_ETH_BAR_0 + (ETH_BAR_GAP * param->win)), ++ (param->target | param->attributes | param->base_addr)); ++ /* High address remap reg (HARR) */ ++ if (param->win < 4) ++ MV_REG_WRITE ((MV64460_ETH_HIGH_ADDR_REMAP_REG_0 + ++ (ETH_HIGH_ADDR_REMAP_REG_GAP * param->win)), ++ param->high_addr); ++ ++ /* Base address enable reg (BARER) */ ++ if (param->enable == 1) ++ MV_RESET_REG_BITS (MV64460_ETH_BASE_ADDR_ENABLE_REG, ++ (1 << param->win)); ++ else ++ MV_SET_REG_BITS (MV64460_ETH_BASE_ADDR_ENABLE_REG, ++ (1 << param->win)); ++} ++ ++/******************************************************************************* ++ * ether_init_rx_desc_ring - Curve a Rx chain desc list and buffer in memory. ++ * ++ * DESCRIPTION: ++ * This function prepares a Rx chained list of descriptors and packet ++ * buffers in a form of a ring. The routine must be called after port ++ * initialization routine and before port start routine. ++ * The Ethernet SDMA engine uses CPU bus addresses to access the various ++ * devices in the system (i.e. DRAM). This function uses the ethernet ++ * struct 'virtual to physical' routine (set by the user) to set the ring ++ * with physical addresses. ++ * ++ * INPUT: ++ * ETH_PORT_INFO *p_eth_port_ctrl Ethernet Port Control srtuct. ++ * ETH_QUEUE rx_queue Number of Rx queue. ++ * int rx_desc_num Number of Rx descriptors ++ * int rx_buff_size Size of Rx buffer ++ * unsigned int rx_desc_base_addr Rx descriptors memory area base addr. ++ * unsigned int rx_buff_base_addr Rx buffer memory area base addr. ++ * ++ * OUTPUT: ++ * The routine updates the Ethernet port control struct with information ++ * regarding the Rx descriptors and buffers. ++ * ++ * RETURN: ++ * false if the given descriptors memory area is not aligned according to ++ * Ethernet SDMA specifications. ++ * true otherwise. ++ * ++ *******************************************************************************/ ++static bool ether_init_rx_desc_ring (ETH_PORT_INFO * p_eth_port_ctrl, ++ ETH_QUEUE rx_queue, ++ int rx_desc_num, ++ int rx_buff_size, ++ unsigned int rx_desc_base_addr, ++ unsigned int rx_buff_base_addr) ++{ ++ ETH_RX_DESC *p_rx_desc; ++ ETH_RX_DESC *p_rx_prev_desc; /* pointer to link with the last descriptor */ ++ unsigned int buffer_addr; ++ int ix; /* a counter */ ++ ++ p_rx_desc = (ETH_RX_DESC *) rx_desc_base_addr; ++ p_rx_prev_desc = p_rx_desc; ++ buffer_addr = rx_buff_base_addr; ++ ++ /* Rx desc Must be 4LW aligned (i.e. Descriptor_Address[3:0]=0000). */ ++ if (rx_buff_base_addr & 0xF) ++ return false; ++ ++ /* Rx buffers are limited to 64K bytes and Minimum size is 8 bytes */ ++ if ((rx_buff_size < 8) || (rx_buff_size > RX_BUFFER_MAX_SIZE)) ++ return false; ++ ++ /* Rx buffers must be 64-bit aligned. */ ++ if ((rx_buff_base_addr + rx_buff_size) & 0x7) ++ return false; ++ ++ /* initialize the Rx descriptors ring */ ++ for (ix = 0; ix < rx_desc_num; ix++) { ++ p_rx_desc->buf_size = rx_buff_size; ++ p_rx_desc->byte_cnt = 0x0000; ++ p_rx_desc->cmd_sts = ++ ETH_BUFFER_OWNED_BY_DMA | ETH_RX_ENABLE_INTERRUPT; ++ p_rx_desc->next_desc_ptr = ++ ((unsigned int) p_rx_desc) + RX_DESC_ALIGNED_SIZE; ++ p_rx_desc->buf_ptr = buffer_addr; ++ p_rx_desc->return_info = 0x00000000; ++ D_CACHE_FLUSH_LINE (p_rx_desc, 0); ++ buffer_addr += rx_buff_size; ++ p_rx_prev_desc = p_rx_desc; ++ p_rx_desc = (ETH_RX_DESC *) ++ ((unsigned int) p_rx_desc + RX_DESC_ALIGNED_SIZE); ++ } ++ ++ /* Closing Rx descriptors ring */ ++ p_rx_prev_desc->next_desc_ptr = (rx_desc_base_addr); ++ D_CACHE_FLUSH_LINE (p_rx_prev_desc, 0); ++ ++ /* Save Rx desc pointer to driver struct. */ ++ CURR_RFD_SET ((ETH_RX_DESC *) rx_desc_base_addr, rx_queue); ++ USED_RFD_SET ((ETH_RX_DESC *) rx_desc_base_addr, rx_queue); ++ ++ p_eth_port_ctrl->p_rx_desc_area_base[rx_queue] = ++ (ETH_RX_DESC *) rx_desc_base_addr; ++ p_eth_port_ctrl->rx_desc_area_size[rx_queue] = ++ rx_desc_num * RX_DESC_ALIGNED_SIZE; ++ ++ p_eth_port_ctrl->port_rx_queue_command |= (1 << rx_queue); ++ ++ return true; ++} ++ ++/******************************************************************************* ++ * ether_init_tx_desc_ring - Curve a Tx chain desc list and buffer in memory. ++ * ++ * DESCRIPTION: ++ * This function prepares a Tx chained list of descriptors and packet ++ * buffers in a form of a ring. The routine must be called after port ++ * initialization routine and before port start routine. ++ * The Ethernet SDMA engine uses CPU bus addresses to access the various ++ * devices in the system (i.e. DRAM). This function uses the ethernet ++ * struct 'virtual to physical' routine (set by the user) to set the ring ++ * with physical addresses. ++ * ++ * INPUT: ++ * ETH_PORT_INFO *p_eth_port_ctrl Ethernet Port Control srtuct. ++ * ETH_QUEUE tx_queue Number of Tx queue. ++ * int tx_desc_num Number of Tx descriptors ++ * int tx_buff_size Size of Tx buffer ++ * unsigned int tx_desc_base_addr Tx descriptors memory area base addr. ++ * unsigned int tx_buff_base_addr Tx buffer memory area base addr. ++ * ++ * OUTPUT: ++ * The routine updates the Ethernet port control struct with information ++ * regarding the Tx descriptors and buffers. ++ * ++ * RETURN: ++ * false if the given descriptors memory area is not aligned according to ++ * Ethernet SDMA specifications. ++ * true otherwise. ++ * ++ *******************************************************************************/ ++static bool ether_init_tx_desc_ring (ETH_PORT_INFO * p_eth_port_ctrl, ++ ETH_QUEUE tx_queue, ++ int tx_desc_num, ++ int tx_buff_size, ++ unsigned int tx_desc_base_addr, ++ unsigned int tx_buff_base_addr) ++{ ++ ++ ETH_TX_DESC *p_tx_desc; ++ ETH_TX_DESC *p_tx_prev_desc; ++ unsigned int buffer_addr; ++ int ix; /* a counter */ ++ ++ /* save the first desc pointer to link with the last descriptor */ ++ p_tx_desc = (ETH_TX_DESC *) tx_desc_base_addr; ++ p_tx_prev_desc = p_tx_desc; ++ buffer_addr = tx_buff_base_addr; ++ ++ /* Tx desc Must be 4LW aligned (i.e. Descriptor_Address[3:0]=0000). */ ++ if (tx_buff_base_addr & 0xF) ++ return false; ++ ++ /* Tx buffers are limited to 64K bytes and Minimum size is 8 bytes */ ++ if ((tx_buff_size > TX_BUFFER_MAX_SIZE) ++ || (tx_buff_size < TX_BUFFER_MIN_SIZE)) ++ return false; ++ ++ /* Initialize the Tx descriptors ring */ ++ for (ix = 0; ix < tx_desc_num; ix++) { ++ p_tx_desc->byte_cnt = 0x0000; ++ p_tx_desc->l4i_chk = 0x0000; ++ p_tx_desc->cmd_sts = 0x00000000; ++ p_tx_desc->next_desc_ptr = ++ ((unsigned int) p_tx_desc) + TX_DESC_ALIGNED_SIZE; ++ ++ p_tx_desc->buf_ptr = buffer_addr; ++ p_tx_desc->return_info = 0x00000000; ++ D_CACHE_FLUSH_LINE (p_tx_desc, 0); ++ buffer_addr += tx_buff_size; ++ p_tx_prev_desc = p_tx_desc; ++ p_tx_desc = (ETH_TX_DESC *) ++ ((unsigned int) p_tx_desc + TX_DESC_ALIGNED_SIZE); ++ ++ } ++ /* Closing Tx descriptors ring */ ++ p_tx_prev_desc->next_desc_ptr = tx_desc_base_addr; ++ D_CACHE_FLUSH_LINE (p_tx_prev_desc, 0); ++ /* Set Tx desc pointer in driver struct. */ ++ CURR_TFD_SET ((ETH_TX_DESC *) tx_desc_base_addr, tx_queue); ++ USED_TFD_SET ((ETH_TX_DESC *) tx_desc_base_addr, tx_queue); ++ ++ /* Init Tx ring base and size parameters */ ++ p_eth_port_ctrl->p_tx_desc_area_base[tx_queue] = ++ (ETH_TX_DESC *) tx_desc_base_addr; ++ p_eth_port_ctrl->tx_desc_area_size[tx_queue] = ++ (tx_desc_num * TX_DESC_ALIGNED_SIZE); ++ ++ /* Add the queue to the list of Tx queues of this port */ ++ p_eth_port_ctrl->port_tx_queue_command |= (1 << tx_queue); ++ ++ return true; ++} ++ ++/******************************************************************************* ++ * eth_port_send - Send an Ethernet packet ++ * ++ * DESCRIPTION: ++ * This routine send a given packet described by p_pktinfo parameter. It ++ * supports transmitting of a packet spaned over multiple buffers. The ++ * routine updates 'curr' and 'first' indexes according to the packet ++ * segment passed to the routine. In case the packet segment is first, ++ * the 'first' index is update. In any case, the 'curr' index is updated. ++ * If the routine get into Tx resource error it assigns 'curr' index as ++ * 'first'. This way the function can abort Tx process of multiple ++ * descriptors per packet. ++ * ++ * INPUT: ++ * ETH_PORT_INFO *p_eth_port_ctrl Ethernet Port Control srtuct. ++ * ETH_QUEUE tx_queue Number of Tx queue. ++ * PKT_INFO *p_pkt_info User packet buffer. ++ * ++ * OUTPUT: ++ * Tx ring 'curr' and 'first' indexes are updated. ++ * ++ * RETURN: ++ * ETH_QUEUE_FULL in case of Tx resource error. ++ * ETH_ERROR in case the routine can not access Tx desc ring. ++ * ETH_QUEUE_LAST_RESOURCE if the routine uses the last Tx resource. ++ * ETH_OK otherwise. ++ * ++ *******************************************************************************/ ++static ETH_FUNC_RET_STATUS eth_port_send (ETH_PORT_INFO * p_eth_port_ctrl, ++ ETH_QUEUE tx_queue, ++ PKT_INFO * p_pkt_info) ++{ ++ volatile ETH_TX_DESC *p_tx_desc_first; ++ volatile ETH_TX_DESC *p_tx_desc_curr; ++ volatile ETH_TX_DESC *p_tx_next_desc_curr; ++ volatile ETH_TX_DESC *p_tx_desc_used; ++ unsigned int command_status; ++ ++ /* Do not process Tx ring in case of Tx ring resource error */ ++ if (p_eth_port_ctrl->tx_resource_err[tx_queue] == true) ++ return ETH_QUEUE_FULL; ++ ++ /* Get the Tx Desc ring indexes */ ++ CURR_TFD_GET (p_tx_desc_curr, tx_queue); ++ USED_TFD_GET (p_tx_desc_used, tx_queue); ++ ++ if (p_tx_desc_curr == NULL) ++ return ETH_ERROR; ++ ++ /* The following parameters are used to save readings from memory */ ++ p_tx_next_desc_curr = TX_NEXT_DESC_PTR (p_tx_desc_curr, tx_queue); ++ command_status = p_pkt_info->cmd_sts | ETH_ZERO_PADDING | ETH_GEN_CRC; ++ ++ if (command_status & (ETH_TX_FIRST_DESC)) { ++ /* Update first desc */ ++ FIRST_TFD_SET (p_tx_desc_curr, tx_queue); ++ p_tx_desc_first = p_tx_desc_curr; ++ } else { ++ FIRST_TFD_GET (p_tx_desc_first, tx_queue); ++ command_status |= ETH_BUFFER_OWNED_BY_DMA; ++ } ++ ++ /* Buffers with a payload smaller than 8 bytes must be aligned to 64-bit */ ++ /* boundary. We use the memory allocated for Tx descriptor. This memory */ ++ /* located in TX_BUF_OFFSET_IN_DESC offset within the Tx descriptor. */ ++ if (p_pkt_info->byte_cnt <= 8) { ++ printf ("You have failed in the < 8 bytes errata - fixme\n"); /* RABEEH - TBD */ ++ return ETH_ERROR; ++ ++ p_tx_desc_curr->buf_ptr = ++ (unsigned int) p_tx_desc_curr + TX_BUF_OFFSET_IN_DESC; ++ eth_b_copy (p_pkt_info->buf_ptr, p_tx_desc_curr->buf_ptr, ++ p_pkt_info->byte_cnt); ++ } else ++ p_tx_desc_curr->buf_ptr = p_pkt_info->buf_ptr; ++ ++ p_tx_desc_curr->byte_cnt = p_pkt_info->byte_cnt; ++ p_tx_desc_curr->return_info = p_pkt_info->return_info; ++ ++ if (p_pkt_info->cmd_sts & (ETH_TX_LAST_DESC)) { ++ /* Set last desc with DMA ownership and interrupt enable. */ ++ p_tx_desc_curr->cmd_sts = command_status | ++ ETH_BUFFER_OWNED_BY_DMA | ETH_TX_ENABLE_INTERRUPT; ++ ++ if (p_tx_desc_curr != p_tx_desc_first) ++ p_tx_desc_first->cmd_sts |= ETH_BUFFER_OWNED_BY_DMA; ++ ++ /* Flush CPU pipe */ ++ ++ D_CACHE_FLUSH_LINE ((unsigned int) p_tx_desc_curr, 0); ++ D_CACHE_FLUSH_LINE ((unsigned int) p_tx_desc_first, 0); ++ CPU_PIPE_FLUSH; ++ ++ /* Apply send command */ ++ ETH_ENABLE_TX_QUEUE (tx_queue, p_eth_port_ctrl->port_num); ++ ++ /* Finish Tx packet. Update first desc in case of Tx resource error */ ++ p_tx_desc_first = p_tx_next_desc_curr; ++ FIRST_TFD_SET (p_tx_desc_first, tx_queue); ++ ++ } else { ++ p_tx_desc_curr->cmd_sts = command_status; ++ D_CACHE_FLUSH_LINE ((unsigned int) p_tx_desc_curr, 0); ++ } ++ ++ /* Check for ring index overlap in the Tx desc ring */ ++ if (p_tx_next_desc_curr == p_tx_desc_used) { ++ /* Update the current descriptor */ ++ CURR_TFD_SET (p_tx_desc_first, tx_queue); ++ ++ p_eth_port_ctrl->tx_resource_err[tx_queue] = true; ++ return ETH_QUEUE_LAST_RESOURCE; ++ } else { ++ /* Update the current descriptor */ ++ CURR_TFD_SET (p_tx_next_desc_curr, tx_queue); ++ return ETH_OK; ++ } ++} ++ ++/******************************************************************************* ++ * eth_tx_return_desc - Free all used Tx descriptors ++ * ++ * DESCRIPTION: ++ * This routine returns the transmitted packet information to the caller. ++ * It uses the 'first' index to support Tx desc return in case a transmit ++ * of a packet spanned over multiple buffer still in process. ++ * In case the Tx queue was in "resource error" condition, where there are ++ * no available Tx resources, the function resets the resource error flag. ++ * ++ * INPUT: ++ * ETH_PORT_INFO *p_eth_port_ctrl Ethernet Port Control srtuct. ++ * ETH_QUEUE tx_queue Number of Tx queue. ++ * PKT_INFO *p_pkt_info User packet buffer. ++ * ++ * OUTPUT: ++ * Tx ring 'first' and 'used' indexes are updated. ++ * ++ * RETURN: ++ * ETH_ERROR in case the routine can not access Tx desc ring. ++ * ETH_RETRY in case there is transmission in process. ++ * ETH_END_OF_JOB if the routine has nothing to release. ++ * ETH_OK otherwise. ++ * ++ *******************************************************************************/ ++static ETH_FUNC_RET_STATUS eth_tx_return_desc (ETH_PORT_INFO * ++ p_eth_port_ctrl, ++ ETH_QUEUE tx_queue, ++ PKT_INFO * p_pkt_info) ++{ ++ volatile ETH_TX_DESC *p_tx_desc_used = NULL; ++ volatile ETH_TX_DESC *p_tx_desc_first = NULL; ++ unsigned int command_status; ++ ++ /* Get the Tx Desc ring indexes */ ++ USED_TFD_GET (p_tx_desc_used, tx_queue); ++ FIRST_TFD_GET (p_tx_desc_first, tx_queue); ++ ++ /* Sanity check */ ++ if (p_tx_desc_used == NULL) ++ return ETH_ERROR; ++ ++ command_status = p_tx_desc_used->cmd_sts; ++ ++ /* Still transmitting... */ ++ if (command_status & (ETH_BUFFER_OWNED_BY_DMA)) { ++ D_CACHE_FLUSH_LINE ((unsigned int) p_tx_desc_used, 0); ++ return ETH_RETRY; ++ } ++ ++ /* Stop release. About to overlap the current available Tx descriptor */ ++ if ((p_tx_desc_used == p_tx_desc_first) && ++ (p_eth_port_ctrl->tx_resource_err[tx_queue] == false)) { ++ D_CACHE_FLUSH_LINE ((unsigned int) p_tx_desc_used, 0); ++ return ETH_END_OF_JOB; ++ } ++ ++ /* Pass the packet information to the caller */ ++ p_pkt_info->cmd_sts = command_status; ++ p_pkt_info->return_info = p_tx_desc_used->return_info; ++ p_tx_desc_used->return_info = 0; ++ ++ /* Update the next descriptor to release. */ ++ USED_TFD_SET (TX_NEXT_DESC_PTR (p_tx_desc_used, tx_queue), tx_queue); ++ ++ /* Any Tx return cancels the Tx resource error status */ ++ if (p_eth_port_ctrl->tx_resource_err[tx_queue] == true) ++ p_eth_port_ctrl->tx_resource_err[tx_queue] = false; ++ ++ D_CACHE_FLUSH_LINE ((unsigned int) p_tx_desc_used, 0); ++ ++ return ETH_OK; ++ ++} ++ ++/******************************************************************************* ++ * eth_port_receive - Get received information from Rx ring. ++ * ++ * DESCRIPTION: ++ * This routine returns the received data to the caller. There is no ++ * data copying during routine operation. All information is returned ++ * using pointer to packet information struct passed from the caller. ++ * If the routine exhausts Rx ring resources then the resource error flag ++ * is set. ++ * ++ * INPUT: ++ * ETH_PORT_INFO *p_eth_port_ctrl Ethernet Port Control srtuct. ++ * ETH_QUEUE rx_queue Number of Rx queue. ++ * PKT_INFO *p_pkt_info User packet buffer. ++ * ++ * OUTPUT: ++ * Rx ring current and used indexes are updated. ++ * ++ * RETURN: ++ * ETH_ERROR in case the routine can not access Rx desc ring. ++ * ETH_QUEUE_FULL if Rx ring resources are exhausted. ++ * ETH_END_OF_JOB if there is no received data. ++ * ETH_OK otherwise. ++ * ++ *******************************************************************************/ ++static ETH_FUNC_RET_STATUS eth_port_receive (ETH_PORT_INFO * p_eth_port_ctrl, ++ ETH_QUEUE rx_queue, ++ PKT_INFO * p_pkt_info) ++{ ++ volatile ETH_RX_DESC *p_rx_curr_desc; ++ volatile ETH_RX_DESC *p_rx_next_curr_desc; ++ volatile ETH_RX_DESC *p_rx_used_desc; ++ unsigned int command_status; ++ ++ /* Do not process Rx ring in case of Rx ring resource error */ ++ if (p_eth_port_ctrl->rx_resource_err[rx_queue] == true) { ++ printf ("\nRx Queue is full ...\n"); ++ return ETH_QUEUE_FULL; ++ } ++ ++ /* Get the Rx Desc ring 'curr and 'used' indexes */ ++ CURR_RFD_GET (p_rx_curr_desc, rx_queue); ++ USED_RFD_GET (p_rx_used_desc, rx_queue); ++ ++ /* Sanity check */ ++ if (p_rx_curr_desc == NULL) ++ return ETH_ERROR; ++ ++ /* The following parameters are used to save readings from memory */ ++ p_rx_next_curr_desc = RX_NEXT_DESC_PTR (p_rx_curr_desc, rx_queue); ++ command_status = p_rx_curr_desc->cmd_sts; ++ ++ /* Nothing to receive... */ ++ if (command_status & (ETH_BUFFER_OWNED_BY_DMA)) { ++/* DP(printf("Rx: command_status: %08x\n", command_status)); */ ++ D_CACHE_FLUSH_LINE ((unsigned int) p_rx_curr_desc, 0); ++/* DP(printf("\nETH_END_OF_JOB ...\n"));*/ ++ return ETH_END_OF_JOB; ++ } ++ ++ p_pkt_info->byte_cnt = (p_rx_curr_desc->byte_cnt) - RX_BUF_OFFSET; ++ p_pkt_info->cmd_sts = command_status; ++ p_pkt_info->buf_ptr = (p_rx_curr_desc->buf_ptr) + RX_BUF_OFFSET; ++ p_pkt_info->return_info = p_rx_curr_desc->return_info; ++ p_pkt_info->l4i_chk = p_rx_curr_desc->buf_size; /* IP fragment indicator */ ++ ++ /* Clean the return info field to indicate that the packet has been */ ++ /* moved to the upper layers */ ++ p_rx_curr_desc->return_info = 0; ++ ++ /* Update 'curr' in data structure */ ++ CURR_RFD_SET (p_rx_next_curr_desc, rx_queue); ++ ++ /* Rx descriptors resource exhausted. Set the Rx ring resource error flag */ ++ if (p_rx_next_curr_desc == p_rx_used_desc) ++ p_eth_port_ctrl->rx_resource_err[rx_queue] = true; ++ ++ D_CACHE_FLUSH_LINE ((unsigned int) p_rx_curr_desc, 0); ++ CPU_PIPE_FLUSH; ++ ++ return ETH_OK; ++} ++ ++/******************************************************************************* ++ * eth_rx_return_buff - Returns a Rx buffer back to the Rx ring. ++ * ++ * DESCRIPTION: ++ * This routine returns a Rx buffer back to the Rx ring. It retrieves the ++ * next 'used' descriptor and attached the returned buffer to it. ++ * In case the Rx ring was in "resource error" condition, where there are ++ * no available Rx resources, the function resets the resource error flag. ++ * ++ * INPUT: ++ * ETH_PORT_INFO *p_eth_port_ctrl Ethernet Port Control srtuct. ++ * ETH_QUEUE rx_queue Number of Rx queue. ++ * PKT_INFO *p_pkt_info Information on the returned buffer. ++ * ++ * OUTPUT: ++ * New available Rx resource in Rx descriptor ring. ++ * ++ * RETURN: ++ * ETH_ERROR in case the routine can not access Rx desc ring. ++ * ETH_OK otherwise. ++ * ++ *******************************************************************************/ ++static ETH_FUNC_RET_STATUS eth_rx_return_buff (ETH_PORT_INFO * ++ p_eth_port_ctrl, ++ ETH_QUEUE rx_queue, ++ PKT_INFO * p_pkt_info) ++{ ++ volatile ETH_RX_DESC *p_used_rx_desc; /* Where to return Rx resource */ ++ ++ /* Get 'used' Rx descriptor */ ++ USED_RFD_GET (p_used_rx_desc, rx_queue); ++ ++ /* Sanity check */ ++ if (p_used_rx_desc == NULL) ++ return ETH_ERROR; ++ ++ p_used_rx_desc->buf_ptr = p_pkt_info->buf_ptr; ++ p_used_rx_desc->return_info = p_pkt_info->return_info; ++ p_used_rx_desc->byte_cnt = p_pkt_info->byte_cnt; ++ p_used_rx_desc->buf_size = MV64460_RX_BUFFER_SIZE; /* Reset Buffer size */ ++ ++ /* Flush the write pipe */ ++ CPU_PIPE_FLUSH; ++ ++ /* Return the descriptor to DMA ownership */ ++ p_used_rx_desc->cmd_sts = ++ ETH_BUFFER_OWNED_BY_DMA | ETH_RX_ENABLE_INTERRUPT; ++ ++ /* Flush descriptor and CPU pipe */ ++ D_CACHE_FLUSH_LINE ((unsigned int) p_used_rx_desc, 0); ++ CPU_PIPE_FLUSH; ++ ++ /* Move the used descriptor pointer to the next descriptor */ ++ USED_RFD_SET (RX_NEXT_DESC_PTR (p_used_rx_desc, rx_queue), rx_queue); ++ ++ /* Any Rx return cancels the Rx resource error status */ ++ if (p_eth_port_ctrl->rx_resource_err[rx_queue] == true) ++ p_eth_port_ctrl->rx_resource_err[rx_queue] = false; ++ ++ return ETH_OK; ++} ++ ++/******************************************************************************* ++ * eth_port_set_rx_coal - Sets coalescing interrupt mechanism on RX path ++ * ++ * DESCRIPTION: ++ * This routine sets the RX coalescing interrupt mechanism parameter. ++ * This parameter is a timeout counter, that counts in 64 t_clk ++ * chunks ; that when timeout event occurs a maskable interrupt ++ * occurs. ++ * The parameter is calculated using the tClk of the MV-643xx chip ++ * , and the required delay of the interrupt in usec. ++ * ++ * INPUT: ++ * ETH_PORT eth_port_num Ethernet port number ++ * unsigned int t_clk t_clk of the MV-643xx chip in HZ units ++ * unsigned int delay Delay in usec ++ * ++ * OUTPUT: ++ * Interrupt coalescing mechanism value is set in MV-643xx chip. ++ * ++ * RETURN: ++ * The interrupt coalescing value set in the gigE port. ++ * ++ *******************************************************************************/ ++#if 0 /* FIXME */ ++static unsigned int eth_port_set_rx_coal (ETH_PORT eth_port_num, ++ unsigned int t_clk, ++ unsigned int delay) ++{ ++ unsigned int coal; ++ ++ coal = ((t_clk / 1000000) * delay) / 64; ++ /* Set RX Coalescing mechanism */ ++ MV_REG_WRITE (MV64460_ETH_SDMA_CONFIG_REG (eth_port_num), ++ ((coal & 0x3fff) << 8) | ++ (MV_REG_READ ++ (MV64460_ETH_SDMA_CONFIG_REG (eth_port_num)) ++ & 0xffc000ff)); ++ return coal; ++} ++ ++#endif ++/******************************************************************************* ++ * eth_port_set_tx_coal - Sets coalescing interrupt mechanism on TX path ++ * ++ * DESCRIPTION: ++ * This routine sets the TX coalescing interrupt mechanism parameter. ++ * This parameter is a timeout counter, that counts in 64 t_clk ++ * chunks ; that when timeout event occurs a maskable interrupt ++ * occurs. ++ * The parameter is calculated using the t_cLK frequency of the ++ * MV-643xx chip and the required delay in the interrupt in uSec ++ * ++ * INPUT: ++ * ETH_PORT eth_port_num Ethernet port number ++ * unsigned int t_clk t_clk of the MV-643xx chip in HZ units ++ * unsigned int delay Delay in uSeconds ++ * ++ * OUTPUT: ++ * Interrupt coalescing mechanism value is set in MV-643xx chip. ++ * ++ * RETURN: ++ * The interrupt coalescing value set in the gigE port. ++ * ++ *******************************************************************************/ ++#if 0 /* FIXME */ ++static unsigned int eth_port_set_tx_coal (ETH_PORT eth_port_num, ++ unsigned int t_clk, ++ unsigned int delay) ++{ ++ unsigned int coal; ++ ++ coal = ((t_clk / 1000000) * delay) / 64; ++ /* Set TX Coalescing mechanism */ ++ MV_REG_WRITE (MV64460_ETH_TX_FIFO_URGENT_THRESHOLD_REG (eth_port_num), ++ coal << 4); ++ return coal; ++} ++#endif ++ ++/******************************************************************************* ++ * eth_b_copy - Copy bytes from source to destination ++ * ++ * DESCRIPTION: ++ * This function supports the eight bytes limitation on Tx buffer size. ++ * The routine will zero eight bytes starting from the destination address ++ * followed by copying bytes from the source address to the destination. ++ * ++ * INPUT: ++ * unsigned int src_addr 32 bit source address. ++ * unsigned int dst_addr 32 bit destination address. ++ * int byte_count Number of bytes to copy. ++ * ++ * OUTPUT: ++ * See description. ++ * ++ * RETURN: ++ * None. ++ * ++ *******************************************************************************/ ++static void eth_b_copy (unsigned int src_addr, unsigned int dst_addr, ++ int byte_count) ++{ ++ /* Zero the dst_addr area */ ++ *(unsigned int *) dst_addr = 0x0; ++ ++ while (byte_count != 0) { ++ *(char *) dst_addr = *(char *) src_addr; ++ dst_addr++; ++ src_addr++; ++ byte_count--; ++ } ++} +diff -Naupr u-boot-1.1.6/board/prodrive/p3mx/mv_eth.h u-boot-1.1.6-fsl-1/board/prodrive/p3mx/mv_eth.h +--- u-boot-1.1.6/board/prodrive/p3mx/mv_eth.h 1969-12-31 18:00:00.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/board/prodrive/p3mx/mv_eth.h 2006-12-06 10:33:49.000000000 -0600 +@@ -0,0 +1,840 @@ ++/* ++ * (C) Copyright 2003 ++ * Ingo Assmus <ingo.assmus@keymile.com> ++ * ++ * based on - Driver for MV64460X ethernet ports ++ * Copyright (C) 2002 rabeeh@galileo.co.il ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++/* ++ * mv_eth.h - header file for the polled mode GT ethernet driver ++ */ ++ ++#ifndef __DB64460_ETH_H__ ++#define __DB64460_ETH_H__ ++ ++#include <asm/types.h> ++#include <asm/io.h> ++#include <asm/byteorder.h> ++#include <common.h> ++#include <net.h> ++#include "mv_regs.h" ++#include "ppc_error_no.h" ++#include "../../Marvell/include/core.h" ++ ++/************************************************************************* ++************************************************************************** ++************************************************************************** ++* The first part is the high level driver of the gigE ethernet ports. * ++************************************************************************** ++************************************************************************** ++*************************************************************************/ ++#ifndef TRUE ++#define TRUE 1 ++#endif ++#ifndef FALSE ++#define FALSE 0 ++#endif ++ ++/* In case not using SG on Tx, define MAX_SKB_FRAGS as 0 */ ++#ifndef MAX_SKB_FRAGS ++#define MAX_SKB_FRAGS 0 ++#endif ++ ++/* Port attributes */ ++/*#define MAX_RX_QUEUE_NUM 8*/ ++/*#define MAX_TX_QUEUE_NUM 8*/ ++#define MAX_RX_QUEUE_NUM 1 ++#define MAX_TX_QUEUE_NUM 1 ++ ++ ++/* Use one TX queue and one RX queue */ ++#define MV64460_TX_QUEUE_NUM 1 ++#define MV64460_RX_QUEUE_NUM 1 ++ ++/* ++ * Number of RX / TX descriptors on RX / TX rings. ++ * Note that allocating RX descriptors is done by allocating the RX ++ * ring AND a preallocated RX buffers (skb's) for each descriptor. ++ * The TX descriptors only allocates the TX descriptors ring, ++ * with no pre allocated TX buffers (skb's are allocated by higher layers. ++ */ ++ ++/* Default TX ring size is 10 descriptors */ ++#ifdef CONFIG_MV64460_ETH_TXQUEUE_SIZE ++#define MV64460_TX_QUEUE_SIZE CONFIG_MV64460_ETH_TXQUEUE_SIZE ++#else ++#define MV64460_TX_QUEUE_SIZE 4 ++#endif ++ ++/* Default RX ring size is 4 descriptors */ ++#ifdef CONFIG_MV64460_ETH_RXQUEUE_SIZE ++#define MV64460_RX_QUEUE_SIZE CONFIG_MV64460_ETH_RXQUEUE_SIZE ++#else ++#define MV64460_RX_QUEUE_SIZE 4 ++#endif ++ ++#ifdef CONFIG_RX_BUFFER_SIZE ++#define MV64460_RX_BUFFER_SIZE CONFIG_RX_BUFFER_SIZE ++#else ++#define MV64460_RX_BUFFER_SIZE 1600 ++#endif ++ ++#ifdef CONFIG_TX_BUFFER_SIZE ++#define MV64460_TX_BUFFER_SIZE CONFIG_TX_BUFFER_SIZE ++#else ++#define MV64460_TX_BUFFER_SIZE 1600 ++#endif ++ ++/* ++ * Network device statistics. Akin to the 2.0 ether stats but ++ * with byte counters. ++ */ ++ ++struct net_device_stats ++{ ++ unsigned long rx_packets; /* total packets received */ ++ unsigned long tx_packets; /* total packets transmitted */ ++ unsigned long rx_bytes; /* total bytes received */ ++ unsigned long tx_bytes; /* total bytes transmitted */ ++ unsigned long rx_errors; /* bad packets received */ ++ unsigned long tx_errors; /* packet transmit problems */ ++ unsigned long rx_dropped; /* no space in linux buffers */ ++ unsigned long tx_dropped; /* no space available in linux */ ++ unsigned long multicast; /* multicast packets received */ ++ unsigned long collisions; ++ ++ /* detailed rx_errors: */ ++ unsigned long rx_length_errors; ++ unsigned long rx_over_errors; /* receiver ring buff overflow */ ++ unsigned long rx_crc_errors; /* recved pkt with crc error */ ++ unsigned long rx_frame_errors; /* recv'd frame alignment error */ ++ unsigned long rx_fifo_errors; /* recv'r fifo overrun */ ++ unsigned long rx_missed_errors; /* receiver missed packet */ ++ ++ /* detailed tx_errors */ ++ unsigned long tx_aborted_errors; ++ unsigned long tx_carrier_errors; ++ unsigned long tx_fifo_errors; ++ unsigned long tx_heartbeat_errors; ++ unsigned long tx_window_errors; ++ ++ /* for cslip etc */ ++ unsigned long rx_compressed; ++ unsigned long tx_compressed; ++}; ++ ++ ++/* Private data structure used for ethernet device */ ++struct mv64460_eth_priv { ++ unsigned int port_num; ++ struct net_device_stats *stats; ++ ++ /* to buffer area aligned */ ++ char * p_eth_tx_buffer[MV64460_TX_QUEUE_SIZE+1]; /*pointers to alligned tx buffs in memory space */ ++ char * p_eth_rx_buffer[MV64460_RX_QUEUE_SIZE+1]; /*pointers to allinged rx buffs in memory space */ ++ ++ /* Size of Tx Ring per queue */ ++ unsigned int tx_ring_size [MAX_TX_QUEUE_NUM]; ++ ++ /* Size of Rx Ring per queue */ ++ unsigned int rx_ring_size [MAX_RX_QUEUE_NUM]; ++ ++ /* Magic Number for Ethernet running */ ++ unsigned int eth_running; ++ ++ int first_init; ++}; ++ ++int mv64460_eth_init (struct eth_device *dev); ++int mv64460_eth_stop (struct eth_device *dev); ++int mv64460_eth_start_xmit (struct eth_device*, volatile void* packet, int length); ++/* return db64460_eth0_poll(); */ ++ ++int mv64460_eth_open (struct eth_device *dev); ++ ++ ++/************************************************************************* ++************************************************************************** ++************************************************************************** ++* The second part is the low level driver of the gigE ethernet ports. * ++************************************************************************** ++************************************************************************** ++*************************************************************************/ ++ ++ ++/******************************************************************************** ++ * Header File for : MV-643xx network interface header ++ * ++ * DESCRIPTION: ++ * This header file contains macros typedefs and function declaration for ++ * the Marvell Gig Bit Ethernet Controller. ++ * ++ * DEPENDENCIES: ++ * None. ++ * ++ *******************************************************************************/ ++ ++ ++#ifdef CONFIG_SPECIAL_CONSISTENT_MEMORY ++#ifdef CONFIG_MV64460_SRAM_CACHEABLE ++/* In case SRAM is cacheable but not cache coherent */ ++#define D_CACHE_FLUSH_LINE(addr, offset) \ ++{ \ ++ __asm__ __volatile__ ("dcbf %0,%1" : : "r" (addr), "r" (offset)); \ ++} ++#else ++/* In case SRAM is cache coherent or non-cacheable */ ++#define D_CACHE_FLUSH_LINE(addr, offset) ; ++#endif ++#else ++#ifdef CONFIG_NOT_COHERENT_CACHE ++/* In case of descriptors on DDR but not cache coherent */ ++#define D_CACHE_FLUSH_LINE(addr, offset) \ ++{ \ ++ __asm__ __volatile__ ("dcbf %0,%1" : : "r" (addr), "r" (offset)); \ ++} ++#else ++/* In case of descriptors on DDR and cache coherent */ ++#define D_CACHE_FLUSH_LINE(addr, offset) ; ++#endif /* CONFIG_NOT_COHERENT_CACHE */ ++#endif /* CONFIG_SPECIAL_CONSISTENT_MEMORY */ ++ ++ ++#define CPU_PIPE_FLUSH \ ++{ \ ++ __asm__ __volatile__ ("eieio"); \ ++} ++ ++ ++/* defines */ ++ ++/* Default port configuration value */ ++#define PORT_CONFIG_VALUE \ ++ ETH_UNICAST_NORMAL_MODE | \ ++ ETH_DEFAULT_RX_QUEUE_0 | \ ++ ETH_DEFAULT_RX_ARP_QUEUE_0 | \ ++ ETH_RECEIVE_BC_IF_NOT_IP_OR_ARP | \ ++ ETH_RECEIVE_BC_IF_IP | \ ++ ETH_RECEIVE_BC_IF_ARP | \ ++ ETH_CAPTURE_TCP_FRAMES_DIS | \ ++ ETH_CAPTURE_UDP_FRAMES_DIS | \ ++ ETH_DEFAULT_RX_TCP_QUEUE_0 | \ ++ ETH_DEFAULT_RX_UDP_QUEUE_0 | \ ++ ETH_DEFAULT_RX_BPDU_QUEUE_0 ++ ++/* Default port extend configuration value */ ++#define PORT_CONFIG_EXTEND_VALUE \ ++ ETH_SPAN_BPDU_PACKETS_AS_NORMAL | \ ++ ETH_PARTITION_DISABLE ++ ++ ++/* Default sdma control value */ ++#ifdef CONFIG_NOT_COHERENT_CACHE ++#define PORT_SDMA_CONFIG_VALUE \ ++ ETH_RX_BURST_SIZE_16_64BIT | \ ++ GT_ETH_IPG_INT_RX(0) | \ ++ ETH_TX_BURST_SIZE_16_64BIT; ++#else ++#define PORT_SDMA_CONFIG_VALUE \ ++ ETH_RX_BURST_SIZE_4_64BIT | \ ++ GT_ETH_IPG_INT_RX(0) | \ ++ ETH_TX_BURST_SIZE_4_64BIT; ++#endif ++ ++#define GT_ETH_IPG_INT_RX(value) \ ++ ((value & 0x3fff) << 8) ++ ++/* Default port serial control value */ ++#define PORT_SERIAL_CONTROL_VALUE \ ++ ETH_FORCE_LINK_PASS | \ ++ ETH_ENABLE_AUTO_NEG_FOR_DUPLX | \ ++ ETH_DISABLE_AUTO_NEG_FOR_FLOW_CTRL | \ ++ ETH_ADV_SYMMETRIC_FLOW_CTRL | \ ++ ETH_FORCE_FC_MODE_NO_PAUSE_DIS_TX | \ ++ ETH_FORCE_BP_MODE_NO_JAM | \ ++ BIT9 | \ ++ ETH_DO_NOT_FORCE_LINK_FAIL | \ ++ ETH_RETRANSMIT_16_ETTEMPTS | \ ++ ETH_ENABLE_AUTO_NEG_SPEED_GMII | \ ++ ETH_DTE_ADV_0 | \ ++ ETH_DISABLE_AUTO_NEG_BYPASS | \ ++ ETH_AUTO_NEG_NO_CHANGE | \ ++ ETH_MAX_RX_PACKET_1552BYTE | \ ++ ETH_CLR_EXT_LOOPBACK | \ ++ ETH_SET_FULL_DUPLEX_MODE | \ ++ ETH_ENABLE_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX; ++ ++#define RX_BUFFER_MAX_SIZE 0xFFFF ++#define TX_BUFFER_MAX_SIZE 0xFFFF /* Buffer are limited to 64k */ ++ ++#define RX_BUFFER_MIN_SIZE 0x8 ++#define TX_BUFFER_MIN_SIZE 0x8 ++ ++/* Tx WRR confoguration macros */ ++#define PORT_MAX_TRAN_UNIT 0x24 /* MTU register (default) 9KByte */ ++#define PORT_MAX_TOKEN_BUCKET_SIZE 0x_fFFF /* PMTBS register (default) */ ++#define PORT_TOKEN_RATE 1023 /* PTTBRC register (default) */ ++ ++/* MAC accepet/reject macros */ ++#define ACCEPT_MAC_ADDR 0 ++#define REJECT_MAC_ADDR 1 ++ ++/* Size of a Tx/Rx descriptor used in chain list data structure */ ++#define RX_DESC_ALIGNED_SIZE 0x20 ++#define TX_DESC_ALIGNED_SIZE 0x20 ++ ++/* An offest in Tx descriptors to store data for buffers less than 8 Bytes */ ++#define TX_BUF_OFFSET_IN_DESC 0x18 ++/* Buffer offset from buffer pointer */ ++#define RX_BUF_OFFSET 0x2 ++ ++/* Gap define */ ++#define ETH_BAR_GAP 0x8 ++#define ETH_SIZE_REG_GAP 0x8 ++#define ETH_HIGH_ADDR_REMAP_REG_GAP 0x4 ++#define ETH_PORT_ACCESS_CTRL_GAP 0x4 ++ ++/* Gigabit Ethernet Unit Global Registers */ ++ ++/* MIB Counters register definitions */ ++#define ETH_MIB_GOOD_OCTETS_RECEIVED_LOW 0x0 ++#define ETH_MIB_GOOD_OCTETS_RECEIVED_HIGH 0x4 ++#define ETH_MIB_BAD_OCTETS_RECEIVED 0x8 ++#define ETH_MIB_INTERNAL_MAC_TRANSMIT_ERR 0xc ++#define ETH_MIB_GOOD_FRAMES_RECEIVED 0x10 ++#define ETH_MIB_BAD_FRAMES_RECEIVED 0x14 ++#define ETH_MIB_BROADCAST_FRAMES_RECEIVED 0x18 ++#define ETH_MIB_MULTICAST_FRAMES_RECEIVED 0x1c ++#define ETH_MIB_FRAMES_64_OCTETS 0x20 ++#define ETH_MIB_FRAMES_65_TO_127_OCTETS 0x24 ++#define ETH_MIB_FRAMES_128_TO_255_OCTETS 0x28 ++#define ETH_MIB_FRAMES_256_TO_511_OCTETS 0x2c ++#define ETH_MIB_FRAMES_512_TO_1023_OCTETS 0x30 ++#define ETH_MIB_FRAMES_1024_TO_MAX_OCTETS 0x34 ++#define ETH_MIB_GOOD_OCTETS_SENT_LOW 0x38 ++#define ETH_MIB_GOOD_OCTETS_SENT_HIGH 0x3c ++#define ETH_MIB_GOOD_FRAMES_SENT 0x40 ++#define ETH_MIB_EXCESSIVE_COLLISION 0x44 ++#define ETH_MIB_MULTICAST_FRAMES_SENT 0x48 ++#define ETH_MIB_BROADCAST_FRAMES_SENT 0x4c ++#define ETH_MIB_UNREC_MAC_CONTROL_RECEIVED 0x50 ++#define ETH_MIB_FC_SENT 0x54 ++#define ETH_MIB_GOOD_FC_RECEIVED 0x58 ++#define ETH_MIB_BAD_FC_RECEIVED 0x5c ++#define ETH_MIB_UNDERSIZE_RECEIVED 0x60 ++#define ETH_MIB_FRAGMENTS_RECEIVED 0x64 ++#define ETH_MIB_OVERSIZE_RECEIVED 0x68 ++#define ETH_MIB_JABBER_RECEIVED 0x6c ++#define ETH_MIB_MAC_RECEIVE_ERROR 0x70 ++#define ETH_MIB_BAD_CRC_EVENT 0x74 ++#define ETH_MIB_COLLISION 0x78 ++#define ETH_MIB_LATE_COLLISION 0x7c ++ ++/* Port serial status reg (PSR) */ ++#define ETH_INTERFACE_GMII_MII 0 ++#define ETH_INTERFACE_PCM BIT0 ++#define ETH_LINK_IS_DOWN 0 ++#define ETH_LINK_IS_UP BIT1 ++#define ETH_PORT_AT_HALF_DUPLEX 0 ++#define ETH_PORT_AT_FULL_DUPLEX BIT2 ++#define ETH_RX_FLOW_CTRL_DISABLED 0 ++#define ETH_RX_FLOW_CTRL_ENBALED BIT3 ++#define ETH_GMII_SPEED_100_10 0 ++#define ETH_GMII_SPEED_1000 BIT4 ++#define ETH_MII_SPEED_10 0 ++#define ETH_MII_SPEED_100 BIT5 ++#define ETH_NO_TX 0 ++#define ETH_TX_IN_PROGRESS BIT7 ++#define ETH_BYPASS_NO_ACTIVE 0 ++#define ETH_BYPASS_ACTIVE BIT8 ++#define ETH_PORT_NOT_AT_PARTITION_STATE 0 ++#define ETH_PORT_AT_PARTITION_STATE BIT9 ++#define ETH_PORT_TX_FIFO_NOT_EMPTY 0 ++#define ETH_PORT_TX_FIFO_EMPTY BIT10 ++ ++ ++/* These macros describes the Port configuration reg (Px_cR) bits */ ++#define ETH_UNICAST_NORMAL_MODE 0 ++#define ETH_UNICAST_PROMISCUOUS_MODE BIT0 ++#define ETH_DEFAULT_RX_QUEUE_0 0 ++#define ETH_DEFAULT_RX_QUEUE_1 BIT1 ++#define ETH_DEFAULT_RX_QUEUE_2 BIT2 ++#define ETH_DEFAULT_RX_QUEUE_3 (BIT2 | BIT1) ++#define ETH_DEFAULT_RX_QUEUE_4 BIT3 ++#define ETH_DEFAULT_RX_QUEUE_5 (BIT3 | BIT1) ++#define ETH_DEFAULT_RX_QUEUE_6 (BIT3 | BIT2) ++#define ETH_DEFAULT_RX_QUEUE_7 (BIT3 | BIT2 | BIT1) ++#define ETH_DEFAULT_RX_ARP_QUEUE_0 0 ++#define ETH_DEFAULT_RX_ARP_QUEUE_1 BIT4 ++#define ETH_DEFAULT_RX_ARP_QUEUE_2 BIT5 ++#define ETH_DEFAULT_RX_ARP_QUEUE_3 (BIT5 | BIT4) ++#define ETH_DEFAULT_RX_ARP_QUEUE_4 BIT6 ++#define ETH_DEFAULT_RX_ARP_QUEUE_5 (BIT6 | BIT4) ++#define ETH_DEFAULT_RX_ARP_QUEUE_6 (BIT6 | BIT5) ++#define ETH_DEFAULT_RX_ARP_QUEUE_7 (BIT6 | BIT5 | BIT4) ++#define ETH_RECEIVE_BC_IF_NOT_IP_OR_ARP 0 ++#define ETH_REJECT_BC_IF_NOT_IP_OR_ARP BIT7 ++#define ETH_RECEIVE_BC_IF_IP 0 ++#define ETH_REJECT_BC_IF_IP BIT8 ++#define ETH_RECEIVE_BC_IF_ARP 0 ++#define ETH_REJECT_BC_IF_ARP BIT9 ++#define ETH_TX_AM_NO_UPDATE_ERROR_SUMMARY BIT12 ++#define ETH_CAPTURE_TCP_FRAMES_DIS 0 ++#define ETH_CAPTURE_TCP_FRAMES_EN BIT14 ++#define ETH_CAPTURE_UDP_FRAMES_DIS 0 ++#define ETH_CAPTURE_UDP_FRAMES_EN BIT15 ++#define ETH_DEFAULT_RX_TCP_QUEUE_0 0 ++#define ETH_DEFAULT_RX_TCP_QUEUE_1 BIT16 ++#define ETH_DEFAULT_RX_TCP_QUEUE_2 BIT17 ++#define ETH_DEFAULT_RX_TCP_QUEUE_3 (BIT17 | BIT16) ++#define ETH_DEFAULT_RX_TCP_QUEUE_4 BIT18 ++#define ETH_DEFAULT_RX_TCP_QUEUE_5 (BIT18 | BIT16) ++#define ETH_DEFAULT_RX_TCP_QUEUE_6 (BIT18 | BIT17) ++#define ETH_DEFAULT_RX_TCP_QUEUE_7 (BIT18 | BIT17 | BIT16) ++#define ETH_DEFAULT_RX_UDP_QUEUE_0 0 ++#define ETH_DEFAULT_RX_UDP_QUEUE_1 BIT19 ++#define ETH_DEFAULT_RX_UDP_QUEUE_2 BIT20 ++#define ETH_DEFAULT_RX_UDP_QUEUE_3 (BIT20 | BIT19) ++#define ETH_DEFAULT_RX_UDP_QUEUE_4 (BIT21 ++#define ETH_DEFAULT_RX_UDP_QUEUE_5 (BIT21 | BIT19) ++#define ETH_DEFAULT_RX_UDP_QUEUE_6 (BIT21 | BIT20) ++#define ETH_DEFAULT_RX_UDP_QUEUE_7 (BIT21 | BIT20 | BIT19) ++#define ETH_DEFAULT_RX_BPDU_QUEUE_0 0 ++#define ETH_DEFAULT_RX_BPDU_QUEUE_1 BIT22 ++#define ETH_DEFAULT_RX_BPDU_QUEUE_2 BIT23 ++#define ETH_DEFAULT_RX_BPDU_QUEUE_3 (BIT23 | BIT22) ++#define ETH_DEFAULT_RX_BPDU_QUEUE_4 BIT24 ++#define ETH_DEFAULT_RX_BPDU_QUEUE_5 (BIT24 | BIT22) ++#define ETH_DEFAULT_RX_BPDU_QUEUE_6 (BIT24 | BIT23) ++#define ETH_DEFAULT_RX_BPDU_QUEUE_7 (BIT24 | BIT23 | BIT22) ++ ++ ++/* These macros describes the Port configuration extend reg (Px_cXR) bits*/ ++#define ETH_CLASSIFY_EN BIT0 ++#define ETH_SPAN_BPDU_PACKETS_AS_NORMAL 0 ++#define ETH_SPAN_BPDU_PACKETS_TO_RX_QUEUE_7 BIT1 ++#define ETH_PARTITION_DISABLE 0 ++#define ETH_PARTITION_ENABLE BIT2 ++ ++ ++/* Tx/Rx queue command reg (RQCR/TQCR)*/ ++#define ETH_QUEUE_0_ENABLE BIT0 ++#define ETH_QUEUE_1_ENABLE BIT1 ++#define ETH_QUEUE_2_ENABLE BIT2 ++#define ETH_QUEUE_3_ENABLE BIT3 ++#define ETH_QUEUE_4_ENABLE BIT4 ++#define ETH_QUEUE_5_ENABLE BIT5 ++#define ETH_QUEUE_6_ENABLE BIT6 ++#define ETH_QUEUE_7_ENABLE BIT7 ++#define ETH_QUEUE_0_DISABLE BIT8 ++#define ETH_QUEUE_1_DISABLE BIT9 ++#define ETH_QUEUE_2_DISABLE BIT10 ++#define ETH_QUEUE_3_DISABLE BIT11 ++#define ETH_QUEUE_4_DISABLE BIT12 ++#define ETH_QUEUE_5_DISABLE BIT13 ++#define ETH_QUEUE_6_DISABLE BIT14 ++#define ETH_QUEUE_7_DISABLE BIT15 ++ ++/* These macros describes the Port Sdma configuration reg (SDCR) bits */ ++#define ETH_RIFB BIT0 ++#define ETH_RX_BURST_SIZE_1_64BIT 0 ++#define ETH_RX_BURST_SIZE_2_64BIT BIT1 ++#define ETH_RX_BURST_SIZE_4_64BIT BIT2 ++#define ETH_RX_BURST_SIZE_8_64BIT (BIT2 | BIT1) ++#define ETH_RX_BURST_SIZE_16_64BIT BIT3 ++#define ETH_BLM_RX_NO_SWAP BIT4 ++#define ETH_BLM_RX_BYTE_SWAP 0 ++#define ETH_BLM_TX_NO_SWAP BIT5 ++#define ETH_BLM_TX_BYTE_SWAP 0 ++#define ETH_DESCRIPTORS_BYTE_SWAP BIT6 ++#define ETH_DESCRIPTORS_NO_SWAP 0 ++#define ETH_TX_BURST_SIZE_1_64BIT 0 ++#define ETH_TX_BURST_SIZE_2_64BIT BIT22 ++#define ETH_TX_BURST_SIZE_4_64BIT BIT23 ++#define ETH_TX_BURST_SIZE_8_64BIT (BIT23 | BIT22) ++#define ETH_TX_BURST_SIZE_16_64BIT BIT24 ++ ++/* These macros describes the Port serial control reg (PSCR) bits */ ++#define ETH_SERIAL_PORT_DISABLE 0 ++#define ETH_SERIAL_PORT_ENABLE BIT0 ++#define ETH_FORCE_LINK_PASS BIT1 ++#define ETH_DO_NOT_FORCE_LINK_PASS 0 ++#define ETH_ENABLE_AUTO_NEG_FOR_DUPLX 0 ++#define ETH_DISABLE_AUTO_NEG_FOR_DUPLX BIT2 ++#define ETH_ENABLE_AUTO_NEG_FOR_FLOW_CTRL 0 ++#define ETH_DISABLE_AUTO_NEG_FOR_FLOW_CTRL BIT3 ++#define ETH_ADV_NO_FLOW_CTRL 0 ++#define ETH_ADV_SYMMETRIC_FLOW_CTRL BIT4 ++#define ETH_FORCE_FC_MODE_NO_PAUSE_DIS_TX 0 ++#define ETH_FORCE_FC_MODE_TX_PAUSE_DIS BIT5 ++#define ETH_FORCE_BP_MODE_NO_JAM 0 ++#define ETH_FORCE_BP_MODE_JAM_TX BIT7 ++#define ETH_FORCE_BP_MODE_JAM_TX_ON_RX_ERR BIT8 ++#define ETH_FORCE_LINK_FAIL 0 ++#define ETH_DO_NOT_FORCE_LINK_FAIL BIT10 ++#define ETH_RETRANSMIT_16_ETTEMPTS 0 ++#define ETH_RETRANSMIT_FOREVER BIT11 ++#define ETH_DISABLE_AUTO_NEG_SPEED_GMII BIT13 ++#define ETH_ENABLE_AUTO_NEG_SPEED_GMII 0 ++#define ETH_DTE_ADV_0 0 ++#define ETH_DTE_ADV_1 BIT14 ++#define ETH_DISABLE_AUTO_NEG_BYPASS 0 ++#define ETH_ENABLE_AUTO_NEG_BYPASS BIT15 ++#define ETH_AUTO_NEG_NO_CHANGE 0 ++#define ETH_RESTART_AUTO_NEG BIT16 ++#define ETH_MAX_RX_PACKET_1518BYTE 0 ++#define ETH_MAX_RX_PACKET_1522BYTE BIT17 ++#define ETH_MAX_RX_PACKET_1552BYTE BIT18 ++#define ETH_MAX_RX_PACKET_9022BYTE (BIT18 | BIT17) ++#define ETH_MAX_RX_PACKET_9192BYTE BIT19 ++#define ETH_MAX_RX_PACKET_9700BYTE (BIT19 | BIT17) ++#define ETH_SET_EXT_LOOPBACK BIT20 ++#define ETH_CLR_EXT_LOOPBACK 0 ++#define ETH_SET_FULL_DUPLEX_MODE BIT21 ++#define ETH_SET_HALF_DUPLEX_MODE 0 ++#define ETH_ENABLE_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX BIT22 ++#define ETH_DISABLE_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX 0 ++#define ETH_SET_GMII_SPEED_TO_10_100 0 ++#define ETH_SET_GMII_SPEED_TO_1000 BIT23 ++#define ETH_SET_MII_SPEED_TO_10 0 ++#define ETH_SET_MII_SPEED_TO_100 BIT24 ++ ++ ++/* SMI reg */ ++#define ETH_SMI_BUSY BIT28 /* 0 - Write, 1 - Read */ ++#define ETH_SMI_READ_VALID BIT27 /* 0 - Write, 1 - Read */ ++#define ETH_SMI_OPCODE_WRITE 0 /* Completion of Read operation */ ++#define ETH_SMI_OPCODE_READ BIT26 /* Operation is in progress */ ++ ++/* SDMA command status fields macros */ ++ ++/* Tx & Rx descriptors status */ ++#define ETH_ERROR_SUMMARY (BIT0) ++ ++/* Tx & Rx descriptors command */ ++#define ETH_BUFFER_OWNED_BY_DMA (BIT31) ++ ++/* Tx descriptors status */ ++#define ETH_LC_ERROR (0 ) ++#define ETH_UR_ERROR (BIT1 ) ++#define ETH_RL_ERROR (BIT2 ) ++#define ETH_LLC_SNAP_FORMAT (BIT9 ) ++ ++/* Rx descriptors status */ ++#define ETH_CRC_ERROR (0 ) ++#define ETH_OVERRUN_ERROR (BIT1 ) ++#define ETH_MAX_FRAME_LENGTH_ERROR (BIT2 ) ++#define ETH_RESOURCE_ERROR ((BIT2 | BIT1)) ++#define ETH_VLAN_TAGGED (BIT19) ++#define ETH_BPDU_FRAME (BIT20) ++#define ETH_TCP_FRAME_OVER_IP_V_4 (0 ) ++#define ETH_UDP_FRAME_OVER_IP_V_4 (BIT21) ++#define ETH_OTHER_FRAME_TYPE (BIT22) ++#define ETH_LAYER_2_IS_ETH_V_2 (BIT23) ++#define ETH_FRAME_TYPE_IP_V_4 (BIT24) ++#define ETH_FRAME_HEADER_OK (BIT25) ++#define ETH_RX_LAST_DESC (BIT26) ++#define ETH_RX_FIRST_DESC (BIT27) ++#define ETH_UNKNOWN_DESTINATION_ADDR (BIT28) ++#define ETH_RX_ENABLE_INTERRUPT (BIT29) ++#define ETH_LAYER_4_CHECKSUM_OK (BIT30) ++ ++/* Rx descriptors byte count */ ++#define ETH_FRAME_FRAGMENTED (BIT2) ++ ++/* Tx descriptors command */ ++#define ETH_LAYER_4_CHECKSUM_FIRST_DESC (BIT10) ++#define ETH_FRAME_SET_TO_VLAN (BIT15) ++#define ETH_TCP_FRAME (0 ) ++#define ETH_UDP_FRAME (BIT16) ++#define ETH_GEN_TCP_UDP_CHECKSUM (BIT17) ++#define ETH_GEN_IP_V_4_CHECKSUM (BIT18) ++#define ETH_ZERO_PADDING (BIT19) ++#define ETH_TX_LAST_DESC (BIT20) ++#define ETH_TX_FIRST_DESC (BIT21) ++#define ETH_GEN_CRC (BIT22) ++#define ETH_TX_ENABLE_INTERRUPT (BIT23) ++#define ETH_AUTO_MODE (BIT30) ++ ++/* Address decode parameters */ ++/* Ethernet Base Address Register bits */ ++#define EBAR_TARGET_DRAM 0x00000000 ++#define EBAR_TARGET_DEVICE 0x00000001 ++#define EBAR_TARGET_CBS 0x00000002 ++#define EBAR_TARGET_PCI0 0x00000003 ++#define EBAR_TARGET_PCI1 0x00000004 ++#define EBAR_TARGET_CUNIT 0x00000005 ++#define EBAR_TARGET_AUNIT 0x00000006 ++#define EBAR_TARGET_GUNIT 0x00000007 ++ ++/* Window attributes */ ++#define EBAR_ATTR_DRAM_CS0 0x00000E00 ++#define EBAR_ATTR_DRAM_CS1 0x00000D00 ++#define EBAR_ATTR_DRAM_CS2 0x00000B00 ++#define EBAR_ATTR_DRAM_CS3 0x00000700 ++ ++/* DRAM Target interface */ ++#define EBAR_ATTR_DRAM_NO_CACHE_COHERENCY 0x00000000 ++#define EBAR_ATTR_DRAM_CACHE_COHERENCY_WT 0x00001000 ++#define EBAR_ATTR_DRAM_CACHE_COHERENCY_WB 0x00002000 ++ ++/* Device Bus Target interface */ ++#define EBAR_ATTR_DEVICE_DEVCS0 0x00001E00 ++#define EBAR_ATTR_DEVICE_DEVCS1 0x00001D00 ++#define EBAR_ATTR_DEVICE_DEVCS2 0x00001B00 ++#define EBAR_ATTR_DEVICE_DEVCS3 0x00001700 ++#define EBAR_ATTR_DEVICE_BOOTCS3 0x00000F00 ++ ++/* PCI Target interface */ ++#define EBAR_ATTR_PCI_BYTE_SWAP 0x00000000 ++#define EBAR_ATTR_PCI_NO_SWAP 0x00000100 ++#define EBAR_ATTR_PCI_BYTE_WORD_SWAP 0x00000200 ++#define EBAR_ATTR_PCI_WORD_SWAP 0x00000300 ++#define EBAR_ATTR_PCI_NO_SNOOP_NOT_ASSERT 0x00000000 ++#define EBAR_ATTR_PCI_NO_SNOOP_ASSERT 0x00000400 ++#define EBAR_ATTR_PCI_IO_SPACE 0x00000000 ++#define EBAR_ATTR_PCI_MEMORY_SPACE 0x00000800 ++#define EBAR_ATTR_PCI_REQ64_FORCE 0x00000000 ++#define EBAR_ATTR_PCI_REQ64_SIZE 0x00001000 ++ ++/* CPU 60x bus or internal SRAM interface */ ++#define EBAR_ATTR_CBS_SRAM_BLOCK0 0x00000000 ++#define EBAR_ATTR_CBS_SRAM_BLOCK1 0x00000100 ++#define EBAR_ATTR_CBS_SRAM 0x00000000 ++#define EBAR_ATTR_CBS_CPU_BUS 0x00000800 ++ ++/* Window access control */ ++#define EWIN_ACCESS_NOT_ALLOWED 0 ++#define EWIN_ACCESS_READ_ONLY BIT0 ++#define EWIN_ACCESS_FULL (BIT1 | BIT0) ++#define EWIN0_ACCESS_MASK 0x0003 ++#define EWIN1_ACCESS_MASK 0x000C ++#define EWIN2_ACCESS_MASK 0x0030 ++#define EWIN3_ACCESS_MASK 0x00C0 ++ ++/* typedefs */ ++ ++typedef enum _eth_port ++{ ++ ETH_0 = 0, ++ ETH_1 = 1, ++ ETH_2 = 2 ++}ETH_PORT; ++ ++typedef enum _eth_func_ret_status ++{ ++ ETH_OK, /* Returned as expected. */ ++ ETH_ERROR, /* Fundamental error. */ ++ ETH_RETRY, /* Could not process request. Try later. */ ++ ETH_END_OF_JOB, /* Ring has nothing to process. */ ++ ETH_QUEUE_FULL, /* Ring resource error. */ ++ ETH_QUEUE_LAST_RESOURCE /* Ring resources about to exhaust. */ ++}ETH_FUNC_RET_STATUS; ++ ++typedef enum _eth_queue ++{ ++ ETH_Q0 = 0, ++ ETH_Q1 = 1, ++ ETH_Q2 = 2, ++ ETH_Q3 = 3, ++ ETH_Q4 = 4, ++ ETH_Q5 = 5, ++ ETH_Q6 = 6, ++ ETH_Q7 = 7 ++} ETH_QUEUE; ++ ++typedef enum _addr_win ++{ ++ ETH_WIN0, ++ ETH_WIN1, ++ ETH_WIN2, ++ ETH_WIN3, ++ ETH_WIN4, ++ ETH_WIN5 ++} ETH_ADDR_WIN; ++ ++typedef enum _eth_target ++{ ++ ETH_TARGET_DRAM , ++ ETH_TARGET_DEVICE, ++ ETH_TARGET_CBS , ++ ETH_TARGET_PCI0 , ++ ETH_TARGET_PCI1 ++}ETH_TARGET; ++ ++typedef struct _eth_rx_desc ++{ ++ unsigned short byte_cnt ; /* Descriptor buffer byte count */ ++ unsigned short buf_size ; /* Buffer size */ ++ unsigned int cmd_sts ; /* Descriptor command status */ ++ unsigned int next_desc_ptr; /* Next descriptor pointer */ ++ unsigned int buf_ptr ; /* Descriptor buffer pointer */ ++ unsigned int return_info ; /* User resource return information */ ++} ETH_RX_DESC; ++ ++ ++typedef struct _eth_tx_desc ++{ ++ unsigned short byte_cnt ; /* Descriptor buffer byte count */ ++ unsigned short l4i_chk ; /* CPU provided TCP Checksum */ ++ unsigned int cmd_sts ; /* Descriptor command status */ ++ unsigned int next_desc_ptr; /* Next descriptor pointer */ ++ unsigned int buf_ptr ; /* Descriptor buffer pointer */ ++ unsigned int return_info ; /* User resource return information */ ++} ETH_TX_DESC; ++ ++/* Unified struct for Rx and Tx operations. The user is not required to */ ++/* be familier with neither Tx nor Rx descriptors. */ ++typedef struct _pkt_info ++{ ++ unsigned short byte_cnt ; /* Descriptor buffer byte count */ ++ unsigned short l4i_chk ; /* Tx CPU provided TCP Checksum */ ++ unsigned int cmd_sts ; /* Descriptor command status */ ++ unsigned int buf_ptr ; /* Descriptor buffer pointer */ ++ unsigned int return_info ; /* User resource return information */ ++} PKT_INFO; ++ ++ ++typedef struct _eth_win_param ++{ ++ ETH_ADDR_WIN win; /* Window number. See ETH_ADDR_WIN enum */ ++ ETH_TARGET target; /* System targets. See ETH_TARGET enum */ ++ unsigned short attributes; /* BAR attributes. See above macros. */ ++ unsigned int base_addr; /* Window base address in unsigned int form */ ++ unsigned int high_addr; /* Window high address in unsigned int form */ ++ unsigned int size; /* Size in MBytes. Must be % 64Kbyte. */ ++ bool enable; /* Enable/disable access to the window. */ ++ unsigned short access_ctrl; /* Access ctrl register. see above macros */ ++} ETH_WIN_PARAM; ++ ++ ++/* Ethernet port specific infomation */ ++ ++typedef struct _eth_port_ctrl ++{ ++ ETH_PORT port_num; /* User Ethernet port number */ ++ int port_phy_addr; /* User phy address of Ethrnet port */ ++ unsigned char port_mac_addr[6]; /* User defined port MAC address. */ ++ unsigned int port_config; /* User port configuration value */ ++ unsigned int port_config_extend; /* User port config extend value */ ++ unsigned int port_sdma_config; /* User port SDMA config value */ ++ unsigned int port_serial_control; /* User port serial control value */ ++ unsigned int port_tx_queue_command; /* Port active Tx queues summary */ ++ unsigned int port_rx_queue_command; /* Port active Rx queues summary */ ++ ++ /* User function to cast virtual address to CPU bus address */ ++ unsigned int (*port_virt_to_phys)(unsigned int addr); ++ /* User scratch pad for user specific data structures */ ++ void *port_private; ++ ++ bool rx_resource_err[MAX_RX_QUEUE_NUM]; /* Rx ring resource error flag */ ++ bool tx_resource_err[MAX_TX_QUEUE_NUM]; /* Tx ring resource error flag */ ++ ++ /* Tx/Rx rings managment indexes fields. For driver use */ ++ ++ /* Next available Rx resource */ ++ volatile ETH_RX_DESC *p_rx_curr_desc_q[MAX_RX_QUEUE_NUM]; ++ /* Returning Rx resource */ ++ volatile ETH_RX_DESC *p_rx_used_desc_q[MAX_RX_QUEUE_NUM]; ++ ++ /* Next available Tx resource */ ++ volatile ETH_TX_DESC *p_tx_curr_desc_q[MAX_TX_QUEUE_NUM]; ++ /* Returning Tx resource */ ++ volatile ETH_TX_DESC *p_tx_used_desc_q[MAX_TX_QUEUE_NUM]; ++ /* An extra Tx index to support transmit of multiple buffers per packet */ ++ volatile ETH_TX_DESC *p_tx_first_desc_q[MAX_TX_QUEUE_NUM]; ++ ++ /* Tx/Rx rings size and base variables fields. For driver use */ ++ ++ volatile ETH_RX_DESC *p_rx_desc_area_base[MAX_RX_QUEUE_NUM]; ++ unsigned int rx_desc_area_size[MAX_RX_QUEUE_NUM]; ++ char *p_rx_buffer_base[MAX_RX_QUEUE_NUM]; ++ ++ volatile ETH_TX_DESC *p_tx_desc_area_base[MAX_TX_QUEUE_NUM]; ++ unsigned int tx_desc_area_size[MAX_TX_QUEUE_NUM]; ++ char *p_tx_buffer_base[MAX_TX_QUEUE_NUM]; ++ ++} ETH_PORT_INFO; ++ ++ ++/* ethernet.h API list */ ++ ++/* Port operation control routines */ ++static void eth_port_init (ETH_PORT_INFO *p_eth_port_ctrl); ++static void eth_port_reset(ETH_PORT eth_port_num); ++static bool eth_port_start(ETH_PORT_INFO *p_eth_port_ctrl); ++ ++ ++/* Port MAC address routines */ ++static void eth_port_uc_addr_set (ETH_PORT eth_port_num, ++ unsigned char *p_addr, ++ ETH_QUEUE queue); ++#if 0 /* FIXME */ ++static void eth_port_mc_addr (ETH_PORT eth_port_num, ++ unsigned char *p_addr, ++ ETH_QUEUE queue, ++ int option); ++#endif ++ ++/* PHY and MIB routines */ ++static bool ethernet_phy_reset(ETH_PORT eth_port_num); ++ ++static bool eth_port_write_smi_reg(ETH_PORT eth_port_num, ++ unsigned int phy_reg, ++ unsigned int value); ++ ++static bool eth_port_read_smi_reg(ETH_PORT eth_port_num, ++ unsigned int phy_reg, ++ unsigned int* value); ++ ++static void eth_clear_mib_counters(ETH_PORT eth_port_num); ++ ++/* Port data flow control routines */ ++static ETH_FUNC_RET_STATUS eth_port_send (ETH_PORT_INFO *p_eth_port_ctrl, ++ ETH_QUEUE tx_queue, ++ PKT_INFO *p_pkt_info); ++static ETH_FUNC_RET_STATUS eth_tx_return_desc(ETH_PORT_INFO *p_eth_port_ctrl, ++ ETH_QUEUE tx_queue, ++ PKT_INFO *p_pkt_info); ++static ETH_FUNC_RET_STATUS eth_port_receive (ETH_PORT_INFO *p_eth_port_ctrl, ++ ETH_QUEUE rx_queue, ++ PKT_INFO *p_pkt_info); ++static ETH_FUNC_RET_STATUS eth_rx_return_buff(ETH_PORT_INFO *p_eth_port_ctrl, ++ ETH_QUEUE rx_queue, ++ PKT_INFO *p_pkt_info); ++ ++ ++static bool ether_init_tx_desc_ring(ETH_PORT_INFO *p_eth_port_ctrl, ++ ETH_QUEUE tx_queue, ++ int tx_desc_num, ++ int tx_buff_size, ++ unsigned int tx_desc_base_addr, ++ unsigned int tx_buff_base_addr); ++ ++static bool ether_init_rx_desc_ring(ETH_PORT_INFO *p_eth_port_ctrl, ++ ETH_QUEUE rx_queue, ++ int rx_desc_num, ++ int rx_buff_size, ++ unsigned int rx_desc_base_addr, ++ unsigned int rx_buff_base_addr); ++ ++#endif /* MV64460_ETH_ */ +diff -Naupr u-boot-1.1.6/board/prodrive/p3mx/mv_regs.h u-boot-1.1.6-fsl-1/board/prodrive/p3mx/mv_regs.h +--- u-boot-1.1.6/board/prodrive/p3mx/mv_regs.h 1969-12-31 18:00:00.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/board/prodrive/p3mx/mv_regs.h 2006-12-06 10:33:49.000000000 -0600 +@@ -0,0 +1,1125 @@ ++/* ++ * (C) Copyright 2003 ++ * Ingo Assmus <ingo.assmus@keymile.com> ++ * ++ * based on - Driver for MV64460X ethernet ports ++ * Copyright (C) 2002 rabeeh@galileo.co.il ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++/******************************************************************************** ++* gt64460r.h - GT-64460 Internal registers definition file. ++* ++* DESCRIPTION: ++* None. ++* ++* DEPENDENCIES: ++* None. ++* ++*******************************************************************************/ ++ ++#ifndef __INCmv_regsh ++#define __INCmv_regsh ++ ++#define MV64460 ++ ++/* Supported by the Atlantis */ ++#define MV64460_INCLUDE_PCI_1 ++#define MV64460_INCLUDE_PCI_0_ARBITER ++#define MV64460_INCLUDE_PCI_1_ARBITER ++#define MV64460_INCLUDE_SNOOP_SUPPORT ++#define MV64460_INCLUDE_P2P ++#define MV64460_INCLUDE_ETH_PORT_2 ++#define MV64460_INCLUDE_CPU_MAPPING ++#define MV64460_INCLUDE_MPSC ++ ++/* Not supported features */ ++#undef INCLUDE_CNTMR_4_7 ++#undef INCLUDE_DMA_4_7 ++ ++/****************************************/ ++/* Processor Address Space */ ++/****************************************/ ++ ++/* DDR SDRAM BAR and size registers */ ++ ++#define MV64460_CS_0_BASE_ADDR 0x008 ++#define MV64460_CS_0_SIZE 0x010 ++#define MV64460_CS_1_BASE_ADDR 0x208 ++#define MV64460_CS_1_SIZE 0x210 ++#define MV64460_CS_2_BASE_ADDR 0x018 ++#define MV64460_CS_2_SIZE 0x020 ++#define MV64460_CS_3_BASE_ADDR 0x218 ++#define MV64460_CS_3_SIZE 0x220 ++ ++/* Devices BAR and size registers */ ++ ++#define MV64460_DEV_CS0_BASE_ADDR 0x028 ++#define MV64460_DEV_CS0_SIZE 0x030 ++#define MV64460_DEV_CS1_BASE_ADDR 0x228 ++#define MV64460_DEV_CS1_SIZE 0x230 ++#define MV64460_DEV_CS2_BASE_ADDR 0x248 ++#define MV64460_DEV_CS2_SIZE 0x250 ++#define MV64460_DEV_CS3_BASE_ADDR 0x038 ++#define MV64460_DEV_CS3_SIZE 0x040 ++#define MV64460_BOOTCS_BASE_ADDR 0x238 ++#define MV64460_BOOTCS_SIZE 0x240 ++ ++/* PCI 0 BAR and size registers */ ++ ++#define MV64460_PCI_0_IO_BASE_ADDR 0x048 ++#define MV64460_PCI_0_IO_SIZE 0x050 ++#define MV64460_PCI_0_MEMORY0_BASE_ADDR 0x058 ++#define MV64460_PCI_0_MEMORY0_SIZE 0x060 ++#define MV64460_PCI_0_MEMORY1_BASE_ADDR 0x080 ++#define MV64460_PCI_0_MEMORY1_SIZE 0x088 ++#define MV64460_PCI_0_MEMORY2_BASE_ADDR 0x258 ++#define MV64460_PCI_0_MEMORY2_SIZE 0x260 ++#define MV64460_PCI_0_MEMORY3_BASE_ADDR 0x280 ++#define MV64460_PCI_0_MEMORY3_SIZE 0x288 ++ ++/* PCI 1 BAR and size registers */ ++#define MV64460_PCI_1_IO_BASE_ADDR 0x090 ++#define MV64460_PCI_1_IO_SIZE 0x098 ++#define MV64460_PCI_1_MEMORY0_BASE_ADDR 0x0a0 ++#define MV64460_PCI_1_MEMORY0_SIZE 0x0a8 ++#define MV64460_PCI_1_MEMORY1_BASE_ADDR 0x0b0 ++#define MV64460_PCI_1_MEMORY1_SIZE 0x0b8 ++#define MV64460_PCI_1_MEMORY2_BASE_ADDR 0x2a0 ++#define MV64460_PCI_1_MEMORY2_SIZE 0x2a8 ++#define MV64460_PCI_1_MEMORY3_BASE_ADDR 0x2b0 ++#define MV64460_PCI_1_MEMORY3_SIZE 0x2b8 ++ ++/* SRAM base address */ ++#define MV64460_INTEGRATED_SRAM_BASE_ADDR 0x268 ++ ++/* internal registers space base address */ ++#define MV64460_INTERNAL_SPACE_BASE_ADDR 0x068 ++ ++/* Enables the CS , DEV_CS , PCI 0 and PCI 1 ++ windows above */ ++#define MV64460_BASE_ADDR_ENABLE 0x278 ++ ++/****************************************/ ++/* PCI remap registers */ ++/****************************************/ ++ /* PCI 0 */ ++#define MV64460_PCI_0_IO_ADDR_REMAP 0x0f0 ++#define MV64460_PCI_0_MEMORY0_LOW_ADDR_REMAP 0x0f8 ++#define MV64460_PCI_0_MEMORY0_HIGH_ADDR_REMAP 0x320 ++#define MV64460_PCI_0_MEMORY1_LOW_ADDR_REMAP 0x100 ++#define MV64460_PCI_0_MEMORY1_HIGH_ADDR_REMAP 0x328 ++#define MV64460_PCI_0_MEMORY2_LOW_ADDR_REMAP 0x2f8 ++#define MV64460_PCI_0_MEMORY2_HIGH_ADDR_REMAP 0x330 ++#define MV64460_PCI_0_MEMORY3_LOW_ADDR_REMAP 0x300 ++#define MV64460_PCI_0_MEMORY3_HIGH_ADDR_REMAP 0x338 ++ /* PCI 1 */ ++#define MV64460_PCI_1_IO_ADDR_REMAP 0x108 ++#define MV64460_PCI_1_MEMORY0_LOW_ADDR_REMAP 0x110 ++#define MV64460_PCI_1_MEMORY0_HIGH_ADDR_REMAP 0x340 ++#define MV64460_PCI_1_MEMORY1_LOW_ADDR_REMAP 0x118 ++#define MV64460_PCI_1_MEMORY1_HIGH_ADDR_REMAP 0x348 ++#define MV64460_PCI_1_MEMORY2_LOW_ADDR_REMAP 0x310 ++#define MV64460_PCI_1_MEMORY2_HIGH_ADDR_REMAP 0x350 ++#define MV64460_PCI_1_MEMORY3_LOW_ADDR_REMAP 0x318 ++#define MV64460_PCI_1_MEMORY3_HIGH_ADDR_REMAP 0x358 ++ ++#define MV64460_CPU_PCI_0_HEADERS_RETARGET_CONTROL 0x3b0 ++#define MV64460_CPU_PCI_0_HEADERS_RETARGET_BASE 0x3b8 ++#define MV64460_CPU_PCI_1_HEADERS_RETARGET_CONTROL 0x3c0 ++#define MV64460_CPU_PCI_1_HEADERS_RETARGET_BASE 0x3c8 ++#define MV64460_CPU_GE_HEADERS_RETARGET_CONTROL 0x3d0 ++#define MV64460_CPU_GE_HEADERS_RETARGET_BASE 0x3d8 ++#define MV64460_CPU_IDMA_HEADERS_RETARGET_CONTROL 0x3e0 ++#define MV64460_CPU_IDMA_HEADERS_RETARGET_BASE 0x3e8 ++ ++/****************************************/ ++/* CPU Control Registers */ ++/****************************************/ ++ ++#define MV64460_CPU_CONFIG 0x000 ++#define MV64460_CPU_MODE 0x120 ++#define MV64460_CPU_MASTER_CONTROL 0x160 ++#define MV64460_CPU_CROSS_BAR_CONTROL_LOW 0x150 ++#define MV64460_CPU_CROSS_BAR_CONTROL_HIGH 0x158 ++#define MV64460_CPU_CROSS_BAR_TIMEOUT 0x168 ++ ++/****************************************/ ++/* SMP RegisterS */ ++/****************************************/ ++ ++#define MV64460_SMP_WHO_AM_I 0x200 ++#define MV64460_SMP_CPU0_DOORBELL 0x214 ++#define MV64460_SMP_CPU0_DOORBELL_CLEAR 0x21C ++#define MV64460_SMP_CPU1_DOORBELL 0x224 ++#define MV64460_SMP_CPU1_DOORBELL_CLEAR 0x22C ++#define MV64460_SMP_CPU0_DOORBELL_MASK 0x234 ++#define MV64460_SMP_CPU1_DOORBELL_MASK 0x23C ++#define MV64460_SMP_SEMAPHOR0 0x244 ++#define MV64460_SMP_SEMAPHOR1 0x24c ++#define MV64460_SMP_SEMAPHOR2 0x254 ++#define MV64460_SMP_SEMAPHOR3 0x25c ++#define MV64460_SMP_SEMAPHOR4 0x264 ++#define MV64460_SMP_SEMAPHOR5 0x26c ++#define MV64460_SMP_SEMAPHOR6 0x274 ++#define MV64460_SMP_SEMAPHOR7 0x27c ++ ++/****************************************/ ++/* CPU Sync Barrier Register */ ++/****************************************/ ++ ++#define MV64460_CPU_0_SYNC_BARRIER_TRIGGER 0x0c0 ++#define MV64460_CPU_0_SYNC_BARRIER_VIRTUAL 0x0c8 ++#define MV64460_CPU_1_SYNC_BARRIER_TRIGGER 0x0d0 ++#define MV64460_CPU_1_SYNC_BARRIER_VIRTUAL 0x0d8 ++ ++/****************************************/ ++/* CPU Access Protect */ ++/****************************************/ ++ ++#define MV64460_CPU_PROTECT_WINDOW_0_BASE_ADDR 0x180 ++#define MV64460_CPU_PROTECT_WINDOW_0_SIZE 0x188 ++#define MV64460_CPU_PROTECT_WINDOW_1_BASE_ADDR 0x190 ++#define MV64460_CPU_PROTECT_WINDOW_1_SIZE 0x198 ++#define MV64460_CPU_PROTECT_WINDOW_2_BASE_ADDR 0x1a0 ++#define MV64460_CPU_PROTECT_WINDOW_2_SIZE 0x1a8 ++#define MV64460_CPU_PROTECT_WINDOW_3_BASE_ADDR 0x1b0 ++#define MV64460_CPU_PROTECT_WINDOW_3_SIZE 0x1b8 ++ ++ ++/****************************************/ ++/* CPU Error Report */ ++/****************************************/ ++ ++#define MV64460_CPU_ERROR_ADDR_LOW 0x070 ++#define MV64460_CPU_ERROR_ADDR_HIGH 0x078 ++#define MV64460_CPU_ERROR_DATA_LOW 0x128 ++#define MV64460_CPU_ERROR_DATA_HIGH 0x130 ++#define MV64460_CPU_ERROR_PARITY 0x138 ++#define MV64460_CPU_ERROR_CAUSE 0x140 ++#define MV64460_CPU_ERROR_MASK 0x148 ++ ++/****************************************/ ++/* CPU Interface Debug Registers */ ++/****************************************/ ++ ++#define MV64460_PUNIT_SLAVE_DEBUG_LOW 0x360 ++#define MV64460_PUNIT_SLAVE_DEBUG_HIGH 0x368 ++#define MV64460_PUNIT_MASTER_DEBUG_LOW 0x370 ++#define MV64460_PUNIT_MASTER_DEBUG_HIGH 0x378 ++#define MV64460_PUNIT_MMASK 0x3e4 ++ ++/****************************************/ ++/* Integrated SRAM Registers */ ++/****************************************/ ++ ++#define MV64460_SRAM_CONFIG 0x380 ++#define MV64460_SRAM_TEST_MODE 0X3F4 ++#define MV64460_SRAM_ERROR_CAUSE 0x388 ++#define MV64460_SRAM_ERROR_ADDR 0x390 ++#define MV64460_SRAM_ERROR_ADDR_HIGH 0X3F8 ++#define MV64460_SRAM_ERROR_DATA_LOW 0x398 ++#define MV64460_SRAM_ERROR_DATA_HIGH 0x3a0 ++#define MV64460_SRAM_ERROR_DATA_PARITY 0x3a8 ++ ++/****************************************/ ++/* SDRAM Configuration */ ++/****************************************/ ++ ++#define MV64460_SDRAM_CONFIG 0x1400 ++#define MV64460_D_UNIT_CONTROL_LOW 0x1404 ++#define MV64460_D_UNIT_CONTROL_HIGH 0x1424 ++#define MV64460_D_UNIT_MMASK 0x14B0 ++#define MV64460_SDRAM_TIMING_CONTROL_LOW 0x1408 ++#define MV64460_SDRAM_TIMING_CONTROL_HIGH 0x140c ++#define MV64460_SDRAM_ADDR_CONTROL 0x1410 ++#define MV64460_SDRAM_OPEN_PAGES_CONTROL 0x1414 ++#define MV64460_SDRAM_OPERATION 0x1418 ++#define MV64460_SDRAM_MODE 0x141c ++#define MV64460_EXTENDED_DRAM_MODE 0x1420 ++#define MV64460_SDRAM_CROSS_BAR_CONTROL_LOW 0x1430 ++#define MV64460_SDRAM_CROSS_BAR_CONTROL_HIGH 0x1434 ++#define MV64460_SDRAM_CROSS_BAR_TIMEOUT 0x1438 ++#define MV64460_SDRAM_ADDR_CTRL_PADS_CALIBRATION 0x14c0 ++#define MV64460_SDRAM_DATA_PADS_CALIBRATION 0x14c4 ++ ++/****************************************/ ++/* SDRAM Error Report */ ++/****************************************/ ++ ++#define MV64460_SDRAM_ERROR_DATA_LOW 0x1444 ++#define MV64460_SDRAM_ERROR_DATA_HIGH 0x1440 ++#define MV64460_SDRAM_ERROR_ADDR 0x1450 ++#define MV64460_SDRAM_RECEIVED_ECC 0x1448 ++#define MV64460_SDRAM_CALCULATED_ECC 0x144c ++#define MV64460_SDRAM_ECC_CONTROL 0x1454 ++#define MV64460_SDRAM_ECC_ERROR_COUNTER 0x1458 ++ ++/******************************************/ ++/* Controlled Delay Line (CDL) Registers */ ++/******************************************/ ++ ++#define MV64460_DFCDL_CONFIG0 0x1480 ++#define MV64460_DFCDL_CONFIG1 0x1484 ++#define MV64460_DLL_WRITE 0x1488 ++#define MV64460_DLL_READ 0x148c ++#define MV64460_SRAM_ADDR 0x1490 ++#define MV64460_SRAM_DATA0 0x1494 ++#define MV64460_SRAM_DATA1 0x1498 ++#define MV64460_SRAM_DATA2 0x149c ++#define MV64460_DFCL_PROBE 0x14a0 ++ ++/******************************************/ ++/* Debug Registers */ ++/******************************************/ ++ ++#define MV64460_DUNIT_DEBUG_LOW 0x1460 ++#define MV64460_DUNIT_DEBUG_HIGH 0x1464 ++#define MV64460_DUNIT_MMASK 0X1b40 ++ ++/****************************************/ ++/* Device Parameters */ ++/****************************************/ ++ ++#define MV64460_DEVICE_BANK0_PARAMETERS 0x45c ++#define MV64460_DEVICE_BANK1_PARAMETERS 0x460 ++#define MV64460_DEVICE_BANK2_PARAMETERS 0x464 ++#define MV64460_DEVICE_BANK3_PARAMETERS 0x468 ++#define MV64460_DEVICE_BOOT_BANK_PARAMETERS 0x46c ++#define MV64460_DEVICE_INTERFACE_CONTROL 0x4c0 ++#define MV64460_DEVICE_INTERFACE_CROSS_BAR_CONTROL_LOW 0x4c8 ++#define MV64460_DEVICE_INTERFACE_CROSS_BAR_CONTROL_HIGH 0x4cc ++#define MV64460_DEVICE_INTERFACE_CROSS_BAR_TIMEOUT 0x4c4 ++ ++/****************************************/ ++/* Device interrupt registers */ ++/****************************************/ ++ ++#define MV64460_DEVICE_INTERRUPT_CAUSE 0x4d0 ++#define MV64460_DEVICE_INTERRUPT_MASK 0x4d4 ++#define MV64460_DEVICE_ERROR_ADDR 0x4d8 ++#define MV64460_DEVICE_ERROR_DATA 0x4dc ++#define MV64460_DEVICE_ERROR_PARITY 0x4e0 ++ ++/****************************************/ ++/* Device debug registers */ ++/****************************************/ ++ ++#define MV64460_DEVICE_DEBUG_LOW 0x4e4 ++#define MV64460_DEVICE_DEBUG_HIGH 0x4e8 ++#define MV64460_RUNIT_MMASK 0x4f0 ++ ++/****************************************/ ++/* PCI Slave Address Decoding registers */ ++/****************************************/ ++ ++#define MV64460_PCI_0_CS_0_BANK_SIZE 0xc08 ++#define MV64460_PCI_1_CS_0_BANK_SIZE 0xc88 ++#define MV64460_PCI_0_CS_1_BANK_SIZE 0xd08 ++#define MV64460_PCI_1_CS_1_BANK_SIZE 0xd88 ++#define MV64460_PCI_0_CS_2_BANK_SIZE 0xc0c ++#define MV64460_PCI_1_CS_2_BANK_SIZE 0xc8c ++#define MV64460_PCI_0_CS_3_BANK_SIZE 0xd0c ++#define MV64460_PCI_1_CS_3_BANK_SIZE 0xd8c ++#define MV64460_PCI_0_DEVCS_0_BANK_SIZE 0xc10 ++#define MV64460_PCI_1_DEVCS_0_BANK_SIZE 0xc90 ++#define MV64460_PCI_0_DEVCS_1_BANK_SIZE 0xd10 ++#define MV64460_PCI_1_DEVCS_1_BANK_SIZE 0xd90 ++#define MV64460_PCI_0_DEVCS_2_BANK_SIZE 0xd18 ++#define MV64460_PCI_1_DEVCS_2_BANK_SIZE 0xd98 ++#define MV64460_PCI_0_DEVCS_3_BANK_SIZE 0xc14 ++#define MV64460_PCI_1_DEVCS_3_BANK_SIZE 0xc94 ++#define MV64460_PCI_0_DEVCS_BOOT_BANK_SIZE 0xd14 ++#define MV64460_PCI_1_DEVCS_BOOT_BANK_SIZE 0xd94 ++#define MV64460_PCI_0_P2P_MEM0_BAR_SIZE 0xd1c ++#define MV64460_PCI_1_P2P_MEM0_BAR_SIZE 0xd9c ++#define MV64460_PCI_0_P2P_MEM1_BAR_SIZE 0xd20 ++#define MV64460_PCI_1_P2P_MEM1_BAR_SIZE 0xda0 ++#define MV64460_PCI_0_P2P_I_O_BAR_SIZE 0xd24 ++#define MV64460_PCI_1_P2P_I_O_BAR_SIZE 0xda4 ++#define MV64460_PCI_0_CPU_BAR_SIZE 0xd28 ++#define MV64460_PCI_1_CPU_BAR_SIZE 0xda8 ++#define MV64460_PCI_0_INTERNAL_SRAM_BAR_SIZE 0xe00 ++#define MV64460_PCI_1_INTERNAL_SRAM_BAR_SIZE 0xe80 ++#define MV64460_PCI_0_EXPANSION_ROM_BAR_SIZE 0xd2c ++#define MV64460_PCI_1_EXPANSION_ROM_BAR_SIZE 0xd9c ++#define MV64460_PCI_0_BASE_ADDR_REG_ENABLE 0xc3c ++#define MV64460_PCI_1_BASE_ADDR_REG_ENABLE 0xcbc ++#define MV64460_PCI_0_CS_0_BASE_ADDR_REMAP 0xc48 ++#define MV64460_PCI_1_CS_0_BASE_ADDR_REMAP 0xcc8 ++#define MV64460_PCI_0_CS_1_BASE_ADDR_REMAP 0xd48 ++#define MV64460_PCI_1_CS_1_BASE_ADDR_REMAP 0xdc8 ++#define MV64460_PCI_0_CS_2_BASE_ADDR_REMAP 0xc4c ++#define MV64460_PCI_1_CS_2_BASE_ADDR_REMAP 0xccc ++#define MV64460_PCI_0_CS_3_BASE_ADDR_REMAP 0xd4c ++#define MV64460_PCI_1_CS_3_BASE_ADDR_REMAP 0xdcc ++#define MV64460_PCI_0_CS_0_BASE_HIGH_ADDR_REMAP 0xF04 ++#define MV64460_PCI_1_CS_0_BASE_HIGH_ADDR_REMAP 0xF84 ++#define MV64460_PCI_0_CS_1_BASE_HIGH_ADDR_REMAP 0xF08 ++#define MV64460_PCI_1_CS_1_BASE_HIGH_ADDR_REMAP 0xF88 ++#define MV64460_PCI_0_CS_2_BASE_HIGH_ADDR_REMAP 0xF0C ++#define MV64460_PCI_1_CS_2_BASE_HIGH_ADDR_REMAP 0xF8C ++#define MV64460_PCI_0_CS_3_BASE_HIGH_ADDR_REMAP 0xF10 ++#define MV64460_PCI_1_CS_3_BASE_HIGH_ADDR_REMAP 0xF90 ++#define MV64460_PCI_0_DEVCS_0_BASE_ADDR_REMAP 0xc50 ++#define MV64460_PCI_1_DEVCS_0_BASE_ADDR_REMAP 0xcd0 ++#define MV64460_PCI_0_DEVCS_1_BASE_ADDR_REMAP 0xd50 ++#define MV64460_PCI_1_DEVCS_1_BASE_ADDR_REMAP 0xdd0 ++#define MV64460_PCI_0_DEVCS_2_BASE_ADDR_REMAP 0xd58 ++#define MV64460_PCI_1_DEVCS_2_BASE_ADDR_REMAP 0xdd8 ++#define MV64460_PCI_0_DEVCS_3_BASE_ADDR_REMAP 0xc54 ++#define MV64460_PCI_1_DEVCS_3_BASE_ADDR_REMAP 0xcd4 ++#define MV64460_PCI_0_DEVCS_BOOTCS_BASE_ADDR_REMAP 0xd54 ++#define MV64460_PCI_1_DEVCS_BOOTCS_BASE_ADDR_REMAP 0xdd4 ++#define MV64460_PCI_0_P2P_MEM0_BASE_ADDR_REMAP_LOW 0xd5c ++#define MV64460_PCI_1_P2P_MEM0_BASE_ADDR_REMAP_LOW 0xddc ++#define MV64460_PCI_0_P2P_MEM0_BASE_ADDR_REMAP_HIGH 0xd60 ++#define MV64460_PCI_1_P2P_MEM0_BASE_ADDR_REMAP_HIGH 0xde0 ++#define MV64460_PCI_0_P2P_MEM1_BASE_ADDR_REMAP_LOW 0xd64 ++#define MV64460_PCI_1_P2P_MEM1_BASE_ADDR_REMAP_LOW 0xde4 ++#define MV64460_PCI_0_P2P_MEM1_BASE_ADDR_REMAP_HIGH 0xd68 ++#define MV64460_PCI_1_P2P_MEM1_BASE_ADDR_REMAP_HIGH 0xde8 ++#define MV64460_PCI_0_P2P_I_O_BASE_ADDR_REMAP 0xd6c ++#define MV64460_PCI_1_P2P_I_O_BASE_ADDR_REMAP 0xdec ++#define MV64460_PCI_0_CPU_BASE_ADDR_REMAP_LOW 0xd70 ++#define MV64460_PCI_1_CPU_BASE_ADDR_REMAP_LOW 0xdf0 ++#define MV64460_PCI_0_CPU_BASE_ADDR_REMAP_HIGH 0xd74 ++#define MV64460_PCI_1_CPU_BASE_ADDR_REMAP_HIGH 0xdf4 ++#define MV64460_PCI_0_INTEGRATED_SRAM_BASE_ADDR_REMAP 0xf00 ++#define MV64460_PCI_1_INTEGRATED_SRAM_BASE_ADDR_REMAP 0xf80 ++#define MV64460_PCI_0_EXPANSION_ROM_BASE_ADDR_REMAP 0xf38 ++#define MV64460_PCI_1_EXPANSION_ROM_BASE_ADDR_REMAP 0xfb8 ++#define MV64460_PCI_0_ADDR_DECODE_CONTROL 0xd3c ++#define MV64460_PCI_1_ADDR_DECODE_CONTROL 0xdbc ++#define MV64460_PCI_0_HEADERS_RETARGET_CONTROL 0xF40 ++#define MV64460_PCI_1_HEADERS_RETARGET_CONTROL 0xFc0 ++#define MV64460_PCI_0_HEADERS_RETARGET_BASE 0xF44 ++#define MV64460_PCI_1_HEADERS_RETARGET_BASE 0xFc4 ++#define MV64460_PCI_0_HEADERS_RETARGET_HIGH 0xF48 ++#define MV64460_PCI_1_HEADERS_RETARGET_HIGH 0xFc8 ++ ++/***********************************/ ++/* PCI Control Register Map */ ++/***********************************/ ++ ++#define MV64460_PCI_0_DLL_STATUS_AND_COMMAND 0x1d20 ++#define MV64460_PCI_1_DLL_STATUS_AND_COMMAND 0x1da0 ++#define MV64460_PCI_0_MPP_PADS_DRIVE_CONTROL 0x1d1C ++#define MV64460_PCI_1_MPP_PADS_DRIVE_CONTROL 0x1d9C ++#define MV64460_PCI_0_COMMAND 0xc00 ++#define MV64460_PCI_1_COMMAND 0xc80 ++#define MV64460_PCI_0_MODE 0xd00 ++#define MV64460_PCI_1_MODE 0xd80 ++#define MV64460_PCI_0_RETRY 0xc04 ++#define MV64460_PCI_1_RETRY 0xc84 ++#define MV64460_PCI_0_READ_BUFFER_DISCARD_TIMER 0xd04 ++#define MV64460_PCI_1_READ_BUFFER_DISCARD_TIMER 0xd84 ++#define MV64460_PCI_0_MSI_TRIGGER_TIMER 0xc38 ++#define MV64460_PCI_1_MSI_TRIGGER_TIMER 0xcb8 ++#define MV64460_PCI_0_ARBITER_CONTROL 0x1d00 ++#define MV64460_PCI_1_ARBITER_CONTROL 0x1d80 ++#define MV64460_PCI_0_CROSS_BAR_CONTROL_LOW 0x1d08 ++#define MV64460_PCI_1_CROSS_BAR_CONTROL_LOW 0x1d88 ++#define MV64460_PCI_0_CROSS_BAR_CONTROL_HIGH 0x1d0c ++#define MV64460_PCI_1_CROSS_BAR_CONTROL_HIGH 0x1d8c ++#define MV64460_PCI_0_CROSS_BAR_TIMEOUT 0x1d04 ++#define MV64460_PCI_1_CROSS_BAR_TIMEOUT 0x1d84 ++#define MV64460_PCI_0_SYNC_BARRIER_TRIGGER_REG 0x1D18 ++#define MV64460_PCI_1_SYNC_BARRIER_TRIGGER_REG 0x1D98 ++#define MV64460_PCI_0_SYNC_BARRIER_VIRTUAL_REG 0x1d10 ++#define MV64460_PCI_1_SYNC_BARRIER_VIRTUAL_REG 0x1d90 ++#define MV64460_PCI_0_P2P_CONFIG 0x1d14 ++#define MV64460_PCI_1_P2P_CONFIG 0x1d94 ++ ++#define MV64460_PCI_0_ACCESS_CONTROL_BASE_0_LOW 0x1e00 ++#define MV64460_PCI_0_ACCESS_CONTROL_BASE_0_HIGH 0x1e04 ++#define MV64460_PCI_0_ACCESS_CONTROL_SIZE_0 0x1e08 ++#define MV64460_PCI_0_ACCESS_CONTROL_BASE_1_LOW 0x1e10 ++#define MV64460_PCI_0_ACCESS_CONTROL_BASE_1_HIGH 0x1e14 ++#define MV64460_PCI_0_ACCESS_CONTROL_SIZE_1 0x1e18 ++#define MV64460_PCI_0_ACCESS_CONTROL_BASE_2_LOW 0x1e20 ++#define MV64460_PCI_0_ACCESS_CONTROL_BASE_2_HIGH 0x1e24 ++#define MV64460_PCI_0_ACCESS_CONTROL_SIZE_2 0x1e28 ++#define MV64460_PCI_0_ACCESS_CONTROL_BASE_3_LOW 0x1e30 ++#define MV64460_PCI_0_ACCESS_CONTROL_BASE_3_HIGH 0x1e34 ++#define MV64460_PCI_0_ACCESS_CONTROL_SIZE_3 0x1e38 ++#define MV64460_PCI_0_ACCESS_CONTROL_BASE_4_LOW 0x1e40 ++#define MV64460_PCI_0_ACCESS_CONTROL_BASE_4_HIGH 0x1e44 ++#define MV64460_PCI_0_ACCESS_CONTROL_SIZE_4 0x1e48 ++#define MV64460_PCI_0_ACCESS_CONTROL_BASE_5_LOW 0x1e50 ++#define MV64460_PCI_0_ACCESS_CONTROL_BASE_5_HIGH 0x1e54 ++#define MV64460_PCI_0_ACCESS_CONTROL_SIZE_5 0x1e58 ++ ++#define MV64460_PCI_1_ACCESS_CONTROL_BASE_0_LOW 0x1e80 ++#define MV64460_PCI_1_ACCESS_CONTROL_BASE_0_HIGH 0x1e84 ++#define MV64460_PCI_1_ACCESS_CONTROL_SIZE_0 0x1e88 ++#define MV64460_PCI_1_ACCESS_CONTROL_BASE_1_LOW 0x1e90 ++#define MV64460_PCI_1_ACCESS_CONTROL_BASE_1_HIGH 0x1e94 ++#define MV64460_PCI_1_ACCESS_CONTROL_SIZE_1 0x1e98 ++#define MV64460_PCI_1_ACCESS_CONTROL_BASE_2_LOW 0x1ea0 ++#define MV64460_PCI_1_ACCESS_CONTROL_BASE_2_HIGH 0x1ea4 ++#define MV64460_PCI_1_ACCESS_CONTROL_SIZE_2 0x1ea8 ++#define MV64460_PCI_1_ACCESS_CONTROL_BASE_3_LOW 0x1eb0 ++#define MV64460_PCI_1_ACCESS_CONTROL_BASE_3_HIGH 0x1eb4 ++#define MV64460_PCI_1_ACCESS_CONTROL_SIZE_3 0x1eb8 ++#define MV64460_PCI_1_ACCESS_CONTROL_BASE_4_LOW 0x1ec0 ++#define MV64460_PCI_1_ACCESS_CONTROL_BASE_4_HIGH 0x1ec4 ++#define MV64460_PCI_1_ACCESS_CONTROL_SIZE_4 0x1ec8 ++#define MV64460_PCI_1_ACCESS_CONTROL_BASE_5_LOW 0x1ed0 ++#define MV64460_PCI_1_ACCESS_CONTROL_BASE_5_HIGH 0x1ed4 ++#define MV64460_PCI_1_ACCESS_CONTROL_SIZE_5 0x1ed8 ++ ++/****************************************/ ++/* PCI Configuration Access Registers */ ++/****************************************/ ++ ++#define MV64460_PCI_0_CONFIG_ADDR 0xcf8 ++#define MV64460_PCI_0_CONFIG_DATA_VIRTUAL_REG 0xcfc ++#define MV64460_PCI_1_CONFIG_ADDR 0xc78 ++#define MV64460_PCI_1_CONFIG_DATA_VIRTUAL_REG 0xc7c ++#define MV64460_PCI_0_INTERRUPT_ACKNOWLEDGE_VIRTUAL_REG 0xc34 ++#define MV64460_PCI_1_INTERRUPT_ACKNOWLEDGE_VIRTUAL_REG 0xcb4 ++ ++/****************************************/ ++/* PCI Error Report Registers */ ++/****************************************/ ++ ++#define MV64460_PCI_0_SERR_MASK 0xc28 ++#define MV64460_PCI_1_SERR_MASK 0xca8 ++#define MV64460_PCI_0_ERROR_ADDR_LOW 0x1d40 ++#define MV64460_PCI_1_ERROR_ADDR_LOW 0x1dc0 ++#define MV64460_PCI_0_ERROR_ADDR_HIGH 0x1d44 ++#define MV64460_PCI_1_ERROR_ADDR_HIGH 0x1dc4 ++#define MV64460_PCI_0_ERROR_ATTRIBUTE 0x1d48 ++#define MV64460_PCI_1_ERROR_ATTRIBUTE 0x1dc8 ++#define MV64460_PCI_0_ERROR_COMMAND 0x1d50 ++#define MV64460_PCI_1_ERROR_COMMAND 0x1dd0 ++#define MV64460_PCI_0_ERROR_CAUSE 0x1d58 ++#define MV64460_PCI_1_ERROR_CAUSE 0x1dd8 ++#define MV64460_PCI_0_ERROR_MASK 0x1d5c ++#define MV64460_PCI_1_ERROR_MASK 0x1ddc ++ ++/****************************************/ ++/* PCI Debug Registers */ ++/****************************************/ ++ ++#define MV64460_PCI_0_MMASK 0X1D24 ++#define MV64460_PCI_1_MMASK 0X1DA4 ++ ++/*********************************************/ ++/* PCI Configuration, Function 0, Registers */ ++/*********************************************/ ++ ++#define MV64460_PCI_DEVICE_AND_VENDOR_ID 0x000 ++#define MV64460_PCI_STATUS_AND_COMMAND 0x004 ++#define MV64460_PCI_CLASS_CODE_AND_REVISION_ID 0x008 ++#define MV64460_PCI_BIST_HEADER_TYPE_LATENCY_TIMER_CACHE_LINE 0x00C ++ ++#define MV64460_PCI_SCS_0_BASE_ADDR_LOW 0x010 ++#define MV64460_PCI_SCS_0_BASE_ADDR_HIGH 0x014 ++#define MV64460_PCI_SCS_1_BASE_ADDR_LOW 0x018 ++#define MV64460_PCI_SCS_1_BASE_ADDR_HIGH 0x01C ++#define MV64460_PCI_INTERNAL_REG_MEM_MAPPED_BASE_ADDR_LOW 0x020 ++#define MV64460_PCI_INTERNAL_REG_MEM_MAPPED_BASE_ADDR_HIGH 0x024 ++#define MV64460_PCI_SUBSYSTEM_ID_AND_SUBSYSTEM_VENDOR_ID 0x02c ++#define MV64460_PCI_EXPANSION_ROM_BASE_ADDR_REG 0x030 ++#define MV64460_PCI_CAPABILTY_LIST_POINTER 0x034 ++#define MV64460_PCI_INTERRUPT_PIN_AND_LINE 0x03C ++ /* capability list */ ++#define MV64460_PCI_POWER_MANAGEMENT_CAPABILITY 0x040 ++#define MV64460_PCI_POWER_MANAGEMENT_STATUS_AND_CONTROL 0x044 ++#define MV64460_PCI_VPD_ADDR 0x048 ++#define MV64460_PCI_VPD_DATA 0x04c ++#define MV64460_PCI_MSI_MESSAGE_CONTROL 0x050 ++#define MV64460_PCI_MSI_MESSAGE_ADDR 0x054 ++#define MV64460_PCI_MSI_MESSAGE_UPPER_ADDR 0x058 ++#define MV64460_PCI_MSI_MESSAGE_DATA 0x05c ++#define MV64460_PCI_X_COMMAND 0x060 ++#define MV64460_PCI_X_STATUS 0x064 ++#define MV64460_PCI_COMPACT_PCI_HOT_SWAP 0x068 ++ ++/***********************************************/ ++/* PCI Configuration, Function 1, Registers */ ++/***********************************************/ ++ ++#define MV64460_PCI_SCS_2_BASE_ADDR_LOW 0x110 ++#define MV64460_PCI_SCS_2_BASE_ADDR_HIGH 0x114 ++#define MV64460_PCI_SCS_3_BASE_ADDR_LOW 0x118 ++#define MV64460_PCI_SCS_3_BASE_ADDR_HIGH 0x11c ++#define MV64460_PCI_INTERNAL_SRAM_BASE_ADDR_LOW 0x120 ++#define MV64460_PCI_INTERNAL_SRAM_BASE_ADDR_HIGH 0x124 ++ ++/***********************************************/ ++/* PCI Configuration, Function 2, Registers */ ++/***********************************************/ ++ ++#define MV64460_PCI_DEVCS_0_BASE_ADDR_LOW 0x210 ++#define MV64460_PCI_DEVCS_0_BASE_ADDR_HIGH 0x214 ++#define MV64460_PCI_DEVCS_1_BASE_ADDR_LOW 0x218 ++#define MV64460_PCI_DEVCS_1_BASE_ADDR_HIGH 0x21c ++#define MV64460_PCI_DEVCS_2_BASE_ADDR_LOW 0x220 ++#define MV64460_PCI_DEVCS_2_BASE_ADDR_HIGH 0x224 ++ ++/***********************************************/ ++/* PCI Configuration, Function 3, Registers */ ++/***********************************************/ ++ ++#define MV64460_PCI_DEVCS_3_BASE_ADDR_LOW 0x310 ++#define MV64460_PCI_DEVCS_3_BASE_ADDR_HIGH 0x314 ++#define MV64460_PCI_BOOT_CS_BASE_ADDR_LOW 0x318 ++#define MV64460_PCI_BOOT_CS_BASE_ADDR_HIGH 0x31c ++#define MV64460_PCI_CPU_BASE_ADDR_LOW 0x220 ++#define MV64460_PCI_CPU_BASE_ADDR_HIGH 0x224 ++ ++/***********************************************/ ++/* PCI Configuration, Function 4, Registers */ ++/***********************************************/ ++ ++#define MV64460_PCI_P2P_MEM0_BASE_ADDR_LOW 0x410 ++#define MV64460_PCI_P2P_MEM0_BASE_ADDR_HIGH 0x414 ++#define MV64460_PCI_P2P_MEM1_BASE_ADDR_LOW 0x418 ++#define MV64460_PCI_P2P_MEM1_BASE_ADDR_HIGH 0x41c ++#define MV64460_PCI_P2P_I_O_BASE_ADDR 0x420 ++#define MV64460_PCI_INTERNAL_REGS_I_O_MAPPED_BASE_ADDR 0x424 ++ ++/****************************************/ ++/* Messaging Unit Registers (I20) */ ++/****************************************/ ++ ++#define MV64460_I2O_INBOUND_MESSAGE_REG0_PCI_0_SIDE 0x010 ++#define MV64460_I2O_INBOUND_MESSAGE_REG1_PCI_0_SIDE 0x014 ++#define MV64460_I2O_OUTBOUND_MESSAGE_REG0_PCI_0_SIDE 0x018 ++#define MV64460_I2O_OUTBOUND_MESSAGE_REG1_PCI_0_SIDE 0x01C ++#define MV64460_I2O_INBOUND_DOORBELL_REG_PCI_0_SIDE 0x020 ++#define MV64460_I2O_INBOUND_INTERRUPT_CAUSE_REG_PCI_0_SIDE 0x024 ++#define MV64460_I2O_INBOUND_INTERRUPT_MASK_REG_PCI_0_SIDE 0x028 ++#define MV64460_I2O_OUTBOUND_DOORBELL_REG_PCI_0_SIDE 0x02C ++#define MV64460_I2O_OUTBOUND_INTERRUPT_CAUSE_REG_PCI_0_SIDE 0x030 ++#define MV64460_I2O_OUTBOUND_INTERRUPT_MASK_REG_PCI_0_SIDE 0x034 ++#define MV64460_I2O_INBOUND_QUEUE_PORT_VIRTUAL_REG_PCI_0_SIDE 0x040 ++#define MV64460_I2O_OUTBOUND_QUEUE_PORT_VIRTUAL_REG_PCI_0_SIDE 0x044 ++#define MV64460_I2O_QUEUE_CONTROL_REG_PCI_0_SIDE 0x050 ++#define MV64460_I2O_QUEUE_BASE_ADDR_REG_PCI_0_SIDE 0x054 ++#define MV64460_I2O_INBOUND_FREE_HEAD_POINTER_REG_PCI_0_SIDE 0x060 ++#define MV64460_I2O_INBOUND_FREE_TAIL_POINTER_REG_PCI_0_SIDE 0x064 ++#define MV64460_I2O_INBOUND_POST_HEAD_POINTER_REG_PCI_0_SIDE 0x068 ++#define MV64460_I2O_INBOUND_POST_TAIL_POINTER_REG_PCI_0_SIDE 0x06C ++#define MV64460_I2O_OUTBOUND_FREE_HEAD_POINTER_REG_PCI_0_SIDE 0x070 ++#define MV64460_I2O_OUTBOUND_FREE_TAIL_POINTER_REG_PCI_0_SIDE 0x074 ++#define MV64460_I2O_OUTBOUND_POST_HEAD_POINTER_REG_PCI_0_SIDE 0x0F8 ++#define MV64460_I2O_OUTBOUND_POST_TAIL_POINTER_REG_PCI_0_SIDE 0x0FC ++ ++#define MV64460_I2O_INBOUND_MESSAGE_REG0_PCI_1_SIDE 0x090 ++#define MV64460_I2O_INBOUND_MESSAGE_REG1_PCI_1_SIDE 0x094 ++#define MV64460_I2O_OUTBOUND_MESSAGE_REG0_PCI_1_SIDE 0x098 ++#define MV64460_I2O_OUTBOUND_MESSAGE_REG1_PCI_1_SIDE 0x09C ++#define MV64460_I2O_INBOUND_DOORBELL_REG_PCI_1_SIDE 0x0A0 ++#define MV64460_I2O_INBOUND_INTERRUPT_CAUSE_REG_PCI_1_SIDE 0x0A4 ++#define MV64460_I2O_INBOUND_INTERRUPT_MASK_REG_PCI_1_SIDE 0x0A8 ++#define MV64460_I2O_OUTBOUND_DOORBELL_REG_PCI_1_SIDE 0x0AC ++#define MV64460_I2O_OUTBOUND_INTERRUPT_CAUSE_REG_PCI_1_SIDE 0x0B0 ++#define MV64460_I2O_OUTBOUND_INTERRUPT_MASK_REG_PCI_1_SIDE 0x0B4 ++#define MV64460_I2O_INBOUND_QUEUE_PORT_VIRTUAL_REG_PCI_1_SIDE 0x0C0 ++#define MV64460_I2O_OUTBOUND_QUEUE_PORT_VIRTUAL_REG_PCI_1_SIDE 0x0C4 ++#define MV64460_I2O_QUEUE_CONTROL_REG_PCI_1_SIDE 0x0D0 ++#define MV64460_I2O_QUEUE_BASE_ADDR_REG_PCI_1_SIDE 0x0D4 ++#define MV64460_I2O_INBOUND_FREE_HEAD_POINTER_REG_PCI_1_SIDE 0x0E0 ++#define MV64460_I2O_INBOUND_FREE_TAIL_POINTER_REG_PCI_1_SIDE 0x0E4 ++#define MV64460_I2O_INBOUND_POST_HEAD_POINTER_REG_PCI_1_SIDE 0x0E8 ++#define MV64460_I2O_INBOUND_POST_TAIL_POINTER_REG_PCI_1_SIDE 0x0EC ++#define MV64460_I2O_OUTBOUND_FREE_HEAD_POINTER_REG_PCI_1_SIDE 0x0F0 ++#define MV64460_I2O_OUTBOUND_FREE_TAIL_POINTER_REG_PCI_1_SIDE 0x0F4 ++#define MV64460_I2O_OUTBOUND_POST_HEAD_POINTER_REG_PCI_1_SIDE 0x078 ++#define MV64460_I2O_OUTBOUND_POST_TAIL_POINTER_REG_PCI_1_SIDE 0x07C ++ ++#define MV64460_I2O_INBOUND_MESSAGE_REG0_CPU0_SIDE 0x1C10 ++#define MV64460_I2O_INBOUND_MESSAGE_REG1_CPU0_SIDE 0x1C14 ++#define MV64460_I2O_OUTBOUND_MESSAGE_REG0_CPU0_SIDE 0x1C18 ++#define MV64460_I2O_OUTBOUND_MESSAGE_REG1_CPU0_SIDE 0x1C1C ++#define MV64460_I2O_INBOUND_DOORBELL_REG_CPU0_SIDE 0x1C20 ++#define MV64460_I2O_INBOUND_INTERRUPT_CAUSE_REG_CPU0_SIDE 0x1C24 ++#define MV64460_I2O_INBOUND_INTERRUPT_MASK_REG_CPU0_SIDE 0x1C28 ++#define MV64460_I2O_OUTBOUND_DOORBELL_REG_CPU0_SIDE 0x1C2C ++#define MV64460_I2O_OUTBOUND_INTERRUPT_CAUSE_REG_CPU0_SIDE 0x1C30 ++#define MV64460_I2O_OUTBOUND_INTERRUPT_MASK_REG_CPU0_SIDE 0x1C34 ++#define MV64460_I2O_INBOUND_QUEUE_PORT_VIRTUAL_REG_CPU0_SIDE 0x1C40 ++#define MV64460_I2O_OUTBOUND_QUEUE_PORT_VIRTUAL_REG_CPU0_SIDE 0x1C44 ++#define MV64460_I2O_QUEUE_CONTROL_REG_CPU0_SIDE 0x1C50 ++#define MV64460_I2O_QUEUE_BASE_ADDR_REG_CPU0_SIDE 0x1C54 ++#define MV64460_I2O_INBOUND_FREE_HEAD_POINTER_REG_CPU0_SIDE 0x1C60 ++#define MV64460_I2O_INBOUND_FREE_TAIL_POINTER_REG_CPU0_SIDE 0x1C64 ++#define MV64460_I2O_INBOUND_POST_HEAD_POINTER_REG_CPU0_SIDE 0x1C68 ++#define MV64460_I2O_INBOUND_POST_TAIL_POINTER_REG_CPU0_SIDE 0x1C6C ++#define MV64460_I2O_OUTBOUND_FREE_HEAD_POINTER_REG_CPU0_SIDE 0x1C70 ++#define MV64460_I2O_OUTBOUND_FREE_TAIL_POINTER_REG_CPU0_SIDE 0x1C74 ++#define MV64460_I2O_OUTBOUND_POST_HEAD_POINTER_REG_CPU0_SIDE 0x1CF8 ++#define MV64460_I2O_OUTBOUND_POST_TAIL_POINTER_REG_CPU0_SIDE 0x1CFC ++#define MV64460_I2O_INBOUND_MESSAGE_REG0_CPU1_SIDE 0x1C90 ++#define MV64460_I2O_INBOUND_MESSAGE_REG1_CPU1_SIDE 0x1C94 ++#define MV64460_I2O_OUTBOUND_MESSAGE_REG0_CPU1_SIDE 0x1C98 ++#define MV64460_I2O_OUTBOUND_MESSAGE_REG1_CPU1_SIDE 0x1C9C ++#define MV64460_I2O_INBOUND_DOORBELL_REG_CPU1_SIDE 0x1CA0 ++#define MV64460_I2O_INBOUND_INTERRUPT_CAUSE_REG_CPU1_SIDE 0x1CA4 ++#define MV64460_I2O_INBOUND_INTERRUPT_MASK_REG_CPU1_SIDE 0x1CA8 ++#define MV64460_I2O_OUTBOUND_DOORBELL_REG_CPU1_SIDE 0x1CAC ++#define MV64460_I2O_OUTBOUND_INTERRUPT_CAUSE_REG_CPU1_SIDE 0x1CB0 ++#define MV64460_I2O_OUTBOUND_INTERRUPT_MASK_REG_CPU1_SIDE 0x1CB4 ++#define MV64460_I2O_INBOUND_QUEUE_PORT_VIRTUAL_REG_CPU1_SIDE 0x1CC0 ++#define MV64460_I2O_OUTBOUND_QUEUE_PORT_VIRTUAL_REG_CPU1_SIDE 0x1CC4 ++#define MV64460_I2O_QUEUE_CONTROL_REG_CPU1_SIDE 0x1CD0 ++#define MV64460_I2O_QUEUE_BASE_ADDR_REG_CPU1_SIDE 0x1CD4 ++#define MV64460_I2O_INBOUND_FREE_HEAD_POINTER_REG_CPU1_SIDE 0x1CE0 ++#define MV64460_I2O_INBOUND_FREE_TAIL_POINTER_REG_CPU1_SIDE 0x1CE4 ++#define MV64460_I2O_INBOUND_POST_HEAD_POINTER_REG_CPU1_SIDE 0x1CE8 ++#define MV64460_I2O_INBOUND_POST_TAIL_POINTER_REG_CPU1_SIDE 0x1CEC ++#define MV64460_I2O_OUTBOUND_FREE_HEAD_POINTER_REG_CPU1_SIDE 0x1CF0 ++#define MV64460_I2O_OUTBOUND_FREE_TAIL_POINTER_REG_CPU1_SIDE 0x1CF4 ++#define MV64460_I2O_OUTBOUND_POST_HEAD_POINTER_REG_CPU1_SIDE 0x1C78 ++#define MV64460_I2O_OUTBOUND_POST_TAIL_POINTER_REG_CPU1_SIDE 0x1C7C ++ ++/****************************************/ ++/* Ethernet Unit Registers */ ++/****************************************/ ++ ++#define MV64460_ETH_PHY_ADDR_REG 0x2000 ++#define MV64460_ETH_SMI_REG 0x2004 ++#define MV64460_ETH_UNIT_DEFAULT_ADDR_REG 0x2008 ++#define MV64460_ETH_UNIT_DEFAULTID_REG 0x200c ++#define MV64460_ETH_UNIT_INTERRUPT_CAUSE_REG 0x2080 ++#define MV64460_ETH_UNIT_INTERRUPT_MASK_REG 0x2084 ++#define MV64460_ETH_UNIT_INTERNAL_USE_REG 0x24fc ++#define MV64460_ETH_UNIT_ERROR_ADDR_REG 0x2094 ++#define MV64460_ETH_BAR_0 0x2200 ++#define MV64460_ETH_BAR_1 0x2208 ++#define MV64460_ETH_BAR_2 0x2210 ++#define MV64460_ETH_BAR_3 0x2218 ++#define MV64460_ETH_BAR_4 0x2220 ++#define MV64460_ETH_BAR_5 0x2228 ++#define MV64460_ETH_SIZE_REG_0 0x2204 ++#define MV64460_ETH_SIZE_REG_1 0x220c ++#define MV64460_ETH_SIZE_REG_2 0x2214 ++#define MV64460_ETH_SIZE_REG_3 0x221c ++#define MV64460_ETH_SIZE_REG_4 0x2224 ++#define MV64460_ETH_SIZE_REG_5 0x222c ++#define MV64460_ETH_HEADERS_RETARGET_BASE_REG 0x2230 ++#define MV64460_ETH_HEADERS_RETARGET_CONTROL_REG 0x2234 ++#define MV64460_ETH_HIGH_ADDR_REMAP_REG_0 0x2280 ++#define MV64460_ETH_HIGH_ADDR_REMAP_REG_1 0x2284 ++#define MV64460_ETH_HIGH_ADDR_REMAP_REG_2 0x2288 ++#define MV64460_ETH_HIGH_ADDR_REMAP_REG_3 0x228c ++#define MV64460_ETH_BASE_ADDR_ENABLE_REG 0x2290 ++#define MV64460_ETH_ACCESS_PROTECTION_REG(port) (0x2294 + (port<<2)) ++#define MV64460_ETH_MIB_COUNTERS_BASE(port) (0x3000 + (port<<7)) ++#define MV64460_ETH_PORT_CONFIG_REG(port) (0x2400 + (port<<10)) ++#define MV64460_ETH_PORT_CONFIG_EXTEND_REG(port) (0x2404 + (port<<10)) ++#define MV64460_ETH_MII_SERIAL_PARAMETRS_REG(port) (0x2408 + (port<<10)) ++#define MV64460_ETH_GMII_SERIAL_PARAMETRS_REG(port) (0x240c + (port<<10)) ++#define MV64460_ETH_VLAN_ETHERTYPE_REG(port) (0x2410 + (port<<10)) ++#define MV64460_ETH_MAC_ADDR_LOW(port) (0x2414 + (port<<10)) ++#define MV64460_ETH_MAC_ADDR_HIGH(port) (0x2418 + (port<<10)) ++#define MV64460_ETH_SDMA_CONFIG_REG(port) (0x241c + (port<<10)) ++#define MV64460_ETH_DSCP_0(port) (0x2420 + (port<<10)) ++#define MV64460_ETH_DSCP_1(port) (0x2424 + (port<<10)) ++#define MV64460_ETH_DSCP_2(port) (0x2428 + (port<<10)) ++#define MV64460_ETH_DSCP_3(port) (0x242c + (port<<10)) ++#define MV64460_ETH_DSCP_4(port) (0x2430 + (port<<10)) ++#define MV64460_ETH_DSCP_5(port) (0x2434 + (port<<10)) ++#define MV64460_ETH_DSCP_6(port) (0x2438 + (port<<10)) ++#define MV64460_ETH_PORT_SERIAL_CONTROL_REG(port) (0x243c + (port<<10)) ++#define MV64460_ETH_VLAN_PRIORITY_TAG_TO_PRIORITY(port) (0x2440 + (port<<10)) ++#define MV64460_ETH_PORT_STATUS_REG(port) (0x2444 + (port<<10)) ++#define MV64460_ETH_TRANSMIT_QUEUE_COMMAND_REG(port) (0x2448 + (port<<10)) ++#define MV64460_ETH_TX_QUEUE_FIXED_PRIORITY(port) (0x244c + (port<<10)) ++#define MV64460_ETH_PORT_TX_TOKEN_BUCKET_RATE_CONFIG(port) (0x2450 + (port<<10)) ++#define MV64460_ETH_MAXIMUM_TRANSMIT_UNIT(port) (0x2458 + (port<<10)) ++#define MV64460_ETH_PORT_MAXIMUM_TOKEN_BUCKET_SIZE(port) (0x245c + (port<<10)) ++#define MV64460_ETH_INTERRUPT_CAUSE_REG(port) (0x2460 + (port<<10)) ++#define MV64460_ETH_INTERRUPT_CAUSE_EXTEND_REG(port) (0x2464 + (port<<10)) ++#define MV64460_ETH_INTERRUPT_MASK_REG(port) (0x2468 + (port<<10)) ++#define MV64460_ETH_INTERRUPT_EXTEND_MASK_REG(port) (0x246c + (port<<10)) ++#define MV64460_ETH_RX_FIFO_URGENT_THRESHOLD_REG(port) (0x2470 + (port<<10)) ++#define MV64460_ETH_TX_FIFO_URGENT_THRESHOLD_REG(port) (0x2474 + (port<<10)) ++#define MV64460_ETH_RX_MINIMAL_FRAME_SIZE_REG(port) (0x247c + (port<<10)) ++#define MV64460_ETH_RX_DISCARDED_FRAMES_COUNTER(port) (0x2484 + (port<<10) ++#define MV64460_ETH_PORT_DEBUG_0_REG(port) (0x248c + (port<<10)) ++#define MV64460_ETH_PORT_DEBUG_1_REG(port) (0x2490 + (port<<10)) ++#define MV64460_ETH_PORT_INTERNAL_ADDR_ERROR_REG(port) (0x2494 + (port<<10)) ++#define MV64460_ETH_INTERNAL_USE_REG(port) (0x24fc + (port<<10)) ++#define MV64460_ETH_RECEIVE_QUEUE_COMMAND_REG(port) (0x2680 + (port<<10)) ++#define MV64460_ETH_CURRENT_SERVED_TX_DESC_PTR(port) (0x2684 + (port<<10)) ++#define MV64460_ETH_RX_CURRENT_QUEUE_DESC_PTR_0(port) (0x260c + (port<<10)) ++#define MV64460_ETH_RX_CURRENT_QUEUE_DESC_PTR_1(port) (0x261c + (port<<10)) ++#define MV64460_ETH_RX_CURRENT_QUEUE_DESC_PTR_2(port) (0x262c + (port<<10)) ++#define MV64460_ETH_RX_CURRENT_QUEUE_DESC_PTR_3(port) (0x263c + (port<<10)) ++#define MV64460_ETH_RX_CURRENT_QUEUE_DESC_PTR_4(port) (0x264c + (port<<10)) ++#define MV64460_ETH_RX_CURRENT_QUEUE_DESC_PTR_5(port) (0x265c + (port<<10)) ++#define MV64460_ETH_RX_CURRENT_QUEUE_DESC_PTR_6(port) (0x266c + (port<<10)) ++#define MV64460_ETH_RX_CURRENT_QUEUE_DESC_PTR_7(port) (0x267c + (port<<10)) ++#define MV64460_ETH_TX_CURRENT_QUEUE_DESC_PTR_0(port) (0x26c0 + (port<<10)) ++#define MV64460_ETH_TX_CURRENT_QUEUE_DESC_PTR_1(port) (0x26c4 + (port<<10)) ++#define MV64460_ETH_TX_CURRENT_QUEUE_DESC_PTR_2(port) (0x26c8 + (port<<10)) ++#define MV64460_ETH_TX_CURRENT_QUEUE_DESC_PTR_3(port) (0x26cc + (port<<10)) ++#define MV64460_ETH_TX_CURRENT_QUEUE_DESC_PTR_4(port) (0x26d0 + (port<<10)) ++#define MV64460_ETH_TX_CURRENT_QUEUE_DESC_PTR_5(port) (0x26d4 + (port<<10)) ++#define MV64460_ETH_TX_CURRENT_QUEUE_DESC_PTR_6(port) (0x26d8 + (port<<10)) ++#define MV64460_ETH_TX_CURRENT_QUEUE_DESC_PTR_7(port) (0x26dc + (port<<10)) ++#define MV64460_ETH_TX_QUEUE_0_TOKEN_BUCKET_COUNT(port) (0x2700 + (port<<10)) ++#define MV64460_ETH_TX_QUEUE_1_TOKEN_BUCKET_COUNT(port) (0x2710 + (port<<10)) ++#define MV64460_ETH_TX_QUEUE_2_TOKEN_BUCKET_COUNT(port) (0x2720 + (port<<10)) ++#define MV64460_ETH_TX_QUEUE_3_TOKEN_BUCKET_COUNT(port) (0x2730 + (port<<10)) ++#define MV64460_ETH_TX_QUEUE_4_TOKEN_BUCKET_COUNT(port) (0x2740 + (port<<10)) ++#define MV64460_ETH_TX_QUEUE_5_TOKEN_BUCKET_COUNT(port) (0x2750 + (port<<10)) ++#define MV64460_ETH_TX_QUEUE_6_TOKEN_BUCKET_COUNT(port) (0x2760 + (port<<10)) ++#define MV64460_ETH_TX_QUEUE_7_TOKEN_BUCKET_COUNT(port) (0x2770 + (port<<10)) ++#define MV64460_ETH_TX_QUEUE_0_TOKEN_BUCKET_CONFIG(port) (0x2704 + (port<<10)) ++#define MV64460_ETH_TX_QUEUE_1_TOKEN_BUCKET_CONFIG(port) (0x2714 + (port<<10)) ++#define MV64460_ETH_TX_QUEUE_2_TOKEN_BUCKET_CONFIG(port) (0x2724 + (port<<10)) ++#define MV64460_ETH_TX_QUEUE_3_TOKEN_BUCKET_CONFIG(port) (0x2734 + (port<<10)) ++#define MV64460_ETH_TX_QUEUE_4_TOKEN_BUCKET_CONFIG(port) (0x2744 + (port<<10)) ++#define MV64460_ETH_TX_QUEUE_5_TOKEN_BUCKET_CONFIG(port) (0x2754 + (port<<10)) ++#define MV64460_ETH_TX_QUEUE_6_TOKEN_BUCKET_CONFIG(port) (0x2764 + (port<<10)) ++#define MV64460_ETH_TX_QUEUE_7_TOKEN_BUCKET_CONFIG(port) (0x2774 + (port<<10)) ++#define MV64460_ETH_TX_QUEUE_0_ARBITER_CONFIG(port) (0x2708 + (port<<10)) ++#define MV64460_ETH_TX_QUEUE_1_ARBITER_CONFIG(port) (0x2718 + (port<<10)) ++#define MV64460_ETH_TX_QUEUE_2_ARBITER_CONFIG(port) (0x2728 + (port<<10)) ++#define MV64460_ETH_TX_QUEUE_3_ARBITER_CONFIG(port) (0x2738 + (port<<10)) ++#define MV64460_ETH_TX_QUEUE_4_ARBITER_CONFIG(port) (0x2748 + (port<<10)) ++#define MV64460_ETH_TX_QUEUE_5_ARBITER_CONFIG(port) (0x2758 + (port<<10)) ++#define MV64460_ETH_TX_QUEUE_6_ARBITER_CONFIG(port) (0x2768 + (port<<10)) ++#define MV64460_ETH_TX_QUEUE_7_ARBITER_CONFIG(port) (0x2778 + (port<<10)) ++#define MV64460_ETH_PORT_TX_TOKEN_BUCKET_COUNT(port) (0x2780 + (port<<10)) ++#define MV64460_ETH_DA_FILTER_SPECIAL_MULTICAST_TABLE_BASE(port) (0x3400 + (port<<10)) ++#define MV64460_ETH_DA_FILTER_OTHER_MULTICAST_TABLE_BASE(port) (0x3500 + (port<<10)) ++#define MV64460_ETH_DA_FILTER_UNICAST_TABLE_BASE(port) (0x3600 + (port<<10)) ++ ++/*******************************************/ ++/* CUNIT Registers */ ++/*******************************************/ ++ ++ /* Address Decoding Register Map */ ++ ++#define MV64460_CUNIT_BASE_ADDR_REG0 0xf200 ++#define MV64460_CUNIT_BASE_ADDR_REG1 0xf208 ++#define MV64460_CUNIT_BASE_ADDR_REG2 0xf210 ++#define MV64460_CUNIT_BASE_ADDR_REG3 0xf218 ++#define MV64460_CUNIT_SIZE0 0xf204 ++#define MV64460_CUNIT_SIZE1 0xf20c ++#define MV64460_CUNIT_SIZE2 0xf214 ++#define MV64460_CUNIT_SIZE3 0xf21c ++#define MV64460_CUNIT_HIGH_ADDR_REMAP_REG0 0xf240 ++#define MV64460_CUNIT_HIGH_ADDR_REMAP_REG1 0xf244 ++#define MV64460_CUNIT_BASE_ADDR_ENABLE_REG 0xf250 ++#define MV64460_MPSC0_ACCESS_PROTECTION_REG 0xf254 ++#define MV64460_MPSC1_ACCESS_PROTECTION_REG 0xf258 ++#define MV64460_CUNIT_INTERNAL_SPACE_BASE_ADDR_REG 0xf25C ++ ++ /* Error Report Registers */ ++ ++#define MV64460_CUNIT_INTERRUPT_CAUSE_REG 0xf310 ++#define MV64460_CUNIT_INTERRUPT_MASK_REG 0xf314 ++#define MV64460_CUNIT_ERROR_ADDR 0xf318 ++ ++ /* Cunit Control Registers */ ++ ++#define MV64460_CUNIT_ARBITER_CONTROL_REG 0xf300 ++#define MV64460_CUNIT_CONFIG_REG 0xb40c ++#define MV64460_CUNIT_CRROSBAR_TIMEOUT_REG 0xf304 ++ ++ /* Cunit Debug Registers */ ++ ++#define MV64460_CUNIT_DEBUG_LOW 0xf340 ++#define MV64460_CUNIT_DEBUG_HIGH 0xf344 ++#define MV64460_CUNIT_MMASK 0xf380 ++ ++ /* Cunit Base Address Enable Window Bits*/ ++#define MV64460_CUNIT_BASE_ADDR_WIN_0_BIT 0x0 ++#define MV64460_CUNIT_BASE_ADDR_WIN_1_BIT 0x1 ++#define MV64460_CUNIT_BASE_ADDR_WIN_2_BIT 0x2 ++#define MV64460_CUNIT_BASE_ADDR_WIN_3_BIT 0x3 ++ ++ /* MPSCs Clocks Routing Registers */ ++ ++#define MV64460_MPSC_ROUTING_REG 0xb400 ++#define MV64460_MPSC_RX_CLOCK_ROUTING_REG 0xb404 ++#define MV64460_MPSC_TX_CLOCK_ROUTING_REG 0xb408 ++ ++ /* MPSCs Interrupts Registers */ ++ ++#define MV64460_MPSC_CAUSE_REG(port) (0xb804 + (port<<3)) ++#define MV64460_MPSC_MASK_REG(port) (0xb884 + (port<<3)) ++ ++#define MV64460_MPSC_MAIN_CONFIG_LOW(port) (0x8000 + (port<<12)) ++#define MV64460_MPSC_MAIN_CONFIG_HIGH(port) (0x8004 + (port<<12)) ++#define MV64460_MPSC_PROTOCOL_CONFIG(port) (0x8008 + (port<<12)) ++#define MV64460_MPSC_CHANNEL_REG1(port) (0x800c + (port<<12)) ++#define MV64460_MPSC_CHANNEL_REG2(port) (0x8010 + (port<<12)) ++#define MV64460_MPSC_CHANNEL_REG3(port) (0x8014 + (port<<12)) ++#define MV64460_MPSC_CHANNEL_REG4(port) (0x8018 + (port<<12)) ++#define MV64460_MPSC_CHANNEL_REG5(port) (0x801c + (port<<12)) ++#define MV64460_MPSC_CHANNEL_REG6(port) (0x8020 + (port<<12)) ++#define MV64460_MPSC_CHANNEL_REG7(port) (0x8024 + (port<<12)) ++#define MV64460_MPSC_CHANNEL_REG8(port) (0x8028 + (port<<12)) ++#define MV64460_MPSC_CHANNEL_REG9(port) (0x802c + (port<<12)) ++#define MV64460_MPSC_CHANNEL_REG10(port) (0x8030 + (port<<12)) ++ ++ /* MPSC0 Registers */ ++ ++ ++/***************************************/ ++/* SDMA Registers */ ++/***************************************/ ++ ++#define MV64460_SDMA_CONFIG_REG(channel) (0x4000 + (channel<<13)) ++#define MV64460_SDMA_COMMAND_REG(channel) (0x4008 + (channel<<13)) ++#define MV64460_SDMA_CURRENT_RX_DESCRIPTOR_POINTER(channel) (0x4810 + (channel<<13)) ++#define MV64460_SDMA_CURRENT_TX_DESCRIPTOR_POINTER(channel) (0x4c10 + (channel<<13)) ++#define MV64460_SDMA_FIRST_TX_DESCRIPTOR_POINTER(channel) (0x4c14 + (channel<<13)) ++ ++#define MV64460_SDMA_CAUSE_REG 0xb800 ++#define MV64460_SDMA_MASK_REG 0xb880 ++ ++ ++/****************************************/ ++/* SDMA Address Space Targets */ ++/****************************************/ ++ ++#define MV64460_SDMA_DRAM_CS_0_TARGET 0x0e00 ++#define MV64460_SDMA_DRAM_CS_1_TARGET 0x0d00 ++#define MV64460_SDMA_DRAM_CS_2_TARGET 0x0b00 ++#define MV64460_SDMA_DRAM_CS_3_TARGET 0x0700 ++ ++#define MV64460_SDMA_DEV_CS_0_TARGET 0x1e01 ++#define MV64460_SDMA_DEV_CS_1_TARGET 0x1d01 ++#define MV64460_SDMA_DEV_CS_2_TARGET 0x1b01 ++#define MV64460_SDMA_DEV_CS_3_TARGET 0x1701 ++ ++#define MV64460_SDMA_BOOT_CS_TARGET 0x0f00 ++ ++#define MV64460_SDMA_SRAM_TARGET 0x0003 ++#define MV64460_SDMA_60X_BUS_TARGET 0x4003 ++ ++#define MV64460_PCI_0_TARGET 0x0003 ++#define MV64460_PCI_1_TARGET 0x0004 ++ ++ ++/* Devices BAR and size registers */ ++ ++#define MV64460_DEV_CS0_BASE_ADDR 0x028 ++#define MV64460_DEV_CS0_SIZE 0x030 ++#define MV64460_DEV_CS1_BASE_ADDR 0x228 ++#define MV64460_DEV_CS1_SIZE 0x230 ++#define MV64460_DEV_CS2_BASE_ADDR 0x248 ++#define MV64460_DEV_CS2_SIZE 0x250 ++#define MV64460_DEV_CS3_BASE_ADDR 0x038 ++#define MV64460_DEV_CS3_SIZE 0x040 ++#define MV64460_BOOTCS_BASE_ADDR 0x238 ++#define MV64460_BOOTCS_SIZE 0x240 ++ ++/* SDMA Window access protection */ ++#define MV64460_SDMA_WIN_ACCESS_NOT_ALLOWED 0 ++#define MV64460_SDMA_WIN_ACCESS_READ_ONLY 1 ++#define MV64460_SDMA_WIN_ACCESS_FULL 2 ++ ++/* BRG Interrupts */ ++ ++#define MV64460_BRG_CONFIG_REG(brg) (0xb200 + (brg<<3)) ++#define MV64460_BRG_BAUDE_TUNING_REG(brg) (0xb204 + (brg<<3)) ++#define MV64460_BRG_CAUSE_REG 0xb834 ++#define MV64460_BRG_MASK_REG 0xb8b4 ++ ++/****************************************/ ++/* DMA Channel Control */ ++/****************************************/ ++ ++#define MV64460_DMA_CHANNEL0_CONTROL 0x840 ++#define MV64460_DMA_CHANNEL0_CONTROL_HIGH 0x880 ++#define MV64460_DMA_CHANNEL1_CONTROL 0x844 ++#define MV64460_DMA_CHANNEL1_CONTROL_HIGH 0x884 ++#define MV64460_DMA_CHANNEL2_CONTROL 0x848 ++#define MV64460_DMA_CHANNEL2_CONTROL_HIGH 0x888 ++#define MV64460_DMA_CHANNEL3_CONTROL 0x84C ++#define MV64460_DMA_CHANNEL3_CONTROL_HIGH 0x88C ++ ++ ++/****************************************/ ++/* IDMA Registers */ ++/****************************************/ ++ ++#define MV64460_DMA_CHANNEL0_BYTE_COUNT 0x800 ++#define MV64460_DMA_CHANNEL1_BYTE_COUNT 0x804 ++#define MV64460_DMA_CHANNEL2_BYTE_COUNT 0x808 ++#define MV64460_DMA_CHANNEL3_BYTE_COUNT 0x80C ++#define MV64460_DMA_CHANNEL0_SOURCE_ADDR 0x810 ++#define MV64460_DMA_CHANNEL1_SOURCE_ADDR 0x814 ++#define MV64460_DMA_CHANNEL2_SOURCE_ADDR 0x818 ++#define MV64460_DMA_CHANNEL3_SOURCE_ADDR 0x81c ++#define MV64460_DMA_CHANNEL0_DESTINATION_ADDR 0x820 ++#define MV64460_DMA_CHANNEL1_DESTINATION_ADDR 0x824 ++#define MV64460_DMA_CHANNEL2_DESTINATION_ADDR 0x828 ++#define MV64460_DMA_CHANNEL3_DESTINATION_ADDR 0x82C ++#define MV64460_DMA_CHANNEL0_NEXT_DESCRIPTOR_POINTER 0x830 ++#define MV64460_DMA_CHANNEL1_NEXT_DESCRIPTOR_POINTER 0x834 ++#define MV64460_DMA_CHANNEL2_NEXT_DESCRIPTOR_POINTER 0x838 ++#define MV64460_DMA_CHANNEL3_NEXT_DESCRIPTOR_POINTER 0x83C ++#define MV64460_DMA_CHANNEL0_CURRENT_DESCRIPTOR_POINTER 0x870 ++#define MV64460_DMA_CHANNEL1_CURRENT_DESCRIPTOR_POINTER 0x874 ++#define MV64460_DMA_CHANNEL2_CURRENT_DESCRIPTOR_POINTER 0x878 ++#define MV64460_DMA_CHANNEL3_CURRENT_DESCRIPTOR_POINTER 0x87C ++ ++ /* IDMA Address Decoding Base Address Registers */ ++ ++#define MV64460_DMA_BASE_ADDR_REG0 0xa00 ++#define MV64460_DMA_BASE_ADDR_REG1 0xa08 ++#define MV64460_DMA_BASE_ADDR_REG2 0xa10 ++#define MV64460_DMA_BASE_ADDR_REG3 0xa18 ++#define MV64460_DMA_BASE_ADDR_REG4 0xa20 ++#define MV64460_DMA_BASE_ADDR_REG5 0xa28 ++#define MV64460_DMA_BASE_ADDR_REG6 0xa30 ++#define MV64460_DMA_BASE_ADDR_REG7 0xa38 ++ ++ /* IDMA Address Decoding Size Address Register */ ++ ++#define MV64460_DMA_SIZE_REG0 0xa04 ++#define MV64460_DMA_SIZE_REG1 0xa0c ++#define MV64460_DMA_SIZE_REG2 0xa14 ++#define MV64460_DMA_SIZE_REG3 0xa1c ++#define MV64460_DMA_SIZE_REG4 0xa24 ++#define MV64460_DMA_SIZE_REG5 0xa2c ++#define MV64460_DMA_SIZE_REG6 0xa34 ++#define MV64460_DMA_SIZE_REG7 0xa3C ++ ++ /* IDMA Address Decoding High Address Remap and Access ++ Protection Registers */ ++ ++#define MV64460_DMA_HIGH_ADDR_REMAP_REG0 0xa60 ++#define MV64460_DMA_HIGH_ADDR_REMAP_REG1 0xa64 ++#define MV64460_DMA_HIGH_ADDR_REMAP_REG2 0xa68 ++#define MV64460_DMA_HIGH_ADDR_REMAP_REG3 0xa6C ++#define MV64460_DMA_BASE_ADDR_ENABLE_REG 0xa80 ++#define MV64460_DMA_CHANNEL0_ACCESS_PROTECTION_REG 0xa70 ++#define MV64460_DMA_CHANNEL1_ACCESS_PROTECTION_REG 0xa74 ++#define MV64460_DMA_CHANNEL2_ACCESS_PROTECTION_REG 0xa78 ++#define MV64460_DMA_CHANNEL3_ACCESS_PROTECTION_REG 0xa7c ++#define MV64460_DMA_ARBITER_CONTROL 0x860 ++#define MV64460_DMA_CROSS_BAR_TIMEOUT 0x8d0 ++ ++ /* IDMA Headers Retarget Registers */ ++ ++#define MV64460_DMA_HEADERS_RETARGET_CONTROL 0xa84 ++#define MV64460_DMA_HEADERS_RETARGET_BASE 0xa88 ++ ++ /* IDMA Interrupt Register */ ++ ++#define MV64460_DMA_INTERRUPT_CAUSE_REG 0x8c0 ++#define MV64460_DMA_INTERRUPT_CAUSE_MASK 0x8c4 ++#define MV64460_DMA_ERROR_ADDR 0x8c8 ++#define MV64460_DMA_ERROR_SELECT 0x8cc ++ ++ /* IDMA Debug Register ( for internal use ) */ ++ ++#define MV64460_DMA_DEBUG_LOW 0x8e0 ++#define MV64460_DMA_DEBUG_HIGH 0x8e4 ++#define MV64460_DMA_SPARE 0xA8C ++ ++/****************************************/ ++/* Timer_Counter */ ++/****************************************/ ++ ++#define MV64460_TIMER_COUNTER0 0x850 ++#define MV64460_TIMER_COUNTER1 0x854 ++#define MV64460_TIMER_COUNTER2 0x858 ++#define MV64460_TIMER_COUNTER3 0x85C ++#define MV64460_TIMER_COUNTER_0_3_CONTROL 0x864 ++#define MV64460_TIMER_COUNTER_0_3_INTERRUPT_CAUSE 0x868 ++#define MV64460_TIMER_COUNTER_0_3_INTERRUPT_MASK 0x86c ++ ++/****************************************/ ++/* Watchdog registers */ ++/****************************************/ ++ ++#define MV64460_WATCHDOG_CONFIG_REG 0xb410 ++#define MV64460_WATCHDOG_VALUE_REG 0xb414 ++ ++/****************************************/ ++/* I2C Registers */ ++/****************************************/ ++ ++#define MV64460_I2C_SLAVE_ADDR 0xc000 ++#define MV64460_I2C_EXTENDED_SLAVE_ADDR 0xc010 ++#define MV64460_I2C_DATA 0xc004 ++#define MV64460_I2C_CONTROL 0xc008 ++#define MV64460_I2C_STATUS_BAUDE_RATE 0xc00C ++#define MV64460_I2C_SOFT_RESET 0xc01c ++ ++/****************************************/ ++/* GPP Interface Registers */ ++/****************************************/ ++ ++#define MV64460_GPP_IO_CONTROL 0xf100 ++#define MV64460_GPP_LEVEL_CONTROL 0xf110 ++#define MV64460_GPP_VALUE 0xf104 ++#define MV64460_GPP_INTERRUPT_CAUSE 0xf108 ++#define MV64460_GPP_INTERRUPT_MASK0 0xf10c ++#define MV64460_GPP_INTERRUPT_MASK1 0xf114 ++#define MV64460_GPP_VALUE_SET 0xf118 ++#define MV64460_GPP_VALUE_CLEAR 0xf11c ++ ++/****************************************/ ++/* Interrupt Controller Registers */ ++/****************************************/ ++ ++/****************************************/ ++/* Interrupts */ ++/****************************************/ ++ ++#define MV64460_MAIN_INTERRUPT_CAUSE_LOW 0x004 ++#define MV64460_MAIN_INTERRUPT_CAUSE_HIGH 0x00c ++#define MV64460_CPU_INTERRUPT0_MASK_LOW 0x014 ++#define MV64460_CPU_INTERRUPT0_MASK_HIGH 0x01c ++#define MV64460_CPU_INTERRUPT0_SELECT_CAUSE 0x024 ++#define MV64460_CPU_INTERRUPT1_MASK_LOW 0x034 ++#define MV64460_CPU_INTERRUPT1_MASK_HIGH 0x03c ++#define MV64460_CPU_INTERRUPT1_SELECT_CAUSE 0x044 ++#define MV64460_INTERRUPT0_MASK_0_LOW 0x054 ++#define MV64460_INTERRUPT0_MASK_0_HIGH 0x05c ++#define MV64460_INTERRUPT0_SELECT_CAUSE 0x064 ++#define MV64460_INTERRUPT1_MASK_0_LOW 0x074 ++#define MV64460_INTERRUPT1_MASK_0_HIGH 0x07c ++#define MV64460_INTERRUPT1_SELECT_CAUSE 0x084 ++ ++/****************************************/ ++/* MPP Interface Registers */ ++/****************************************/ ++ ++#define MV64460_MPP_CONTROL0 0xf000 ++#define MV64460_MPP_CONTROL1 0xf004 ++#define MV64460_MPP_CONTROL2 0xf008 ++#define MV64460_MPP_CONTROL3 0xf00c ++ ++/****************************************/ ++/* Serial Initialization registers */ ++/****************************************/ ++ ++#define MV64460_SERIAL_INIT_LAST_DATA 0xf324 ++#define MV64460_SERIAL_INIT_CONTROL 0xf328 ++#define MV64460_SERIAL_INIT_STATUS 0xf32c ++ ++ ++#endif /* __INCgt64460rh */ +diff -Naupr u-boot-1.1.6/board/prodrive/p3mx/p3mx.c u-boot-1.1.6-fsl-1/board/prodrive/p3mx/p3mx.c +--- u-boot-1.1.6/board/prodrive/p3mx/p3mx.c 1969-12-31 18:00:00.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/board/prodrive/p3mx/p3mx.c 2006-12-06 10:33:49.000000000 -0600 +@@ -0,0 +1,809 @@ ++/* ++ * (C) Copyright 2006 ++ * Stefan Roese, DENX Software Engineering, sr@denx.de. ++ * ++ * Based on original work by ++ * Roel Loeffen, (C) Copyright 2006 Prodrive B.V. ++ * Josh Huber, (C) Copyright 2001 Mission Critical Linux, Inc. ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ * ++ * modifications for the DB64360 eval board based by Ingo.Assmus@keymile.com ++ * modifications for the cpci750 by reinhard.arlt@esd-electronics.com ++ * modifications for the P3M750 by roel.loeffen@prodrive.nl ++ */ ++ ++/* ++ * p3m750.c - main board support/init for the Prodrive p3m750/p3m7448. ++ */ ++ ++#include <common.h> ++#include <74xx_7xx.h> ++#include "../../Marvell/include/memory.h" ++#include "../../Marvell/include/pci.h" ++#include "../../Marvell/include/mv_gen_reg.h" ++#include <net.h> ++#include <i2c.h> ++ ++#include "eth.h" ++#include "mpsc.h" ++#include "64460.h" ++#include "mv_regs.h" ++ ++DECLARE_GLOBAL_DATA_PTR; ++ ++#undef DEBUG ++/*#define DEBUG */ ++ ++#ifdef CONFIG_PCI ++#define MAP_PCI ++#endif /* of CONFIG_PCI */ ++ ++#ifdef DEBUG ++#define DP(x) x ++#else ++#define DP(x) ++#endif ++ ++extern void flush_data_cache (void); ++extern void invalidate_l1_instruction_cache (void); ++extern flash_info_t flash_info[]; ++ ++/* ------------------------------------------------------------------------- */ ++ ++/* this is the current GT register space location */ ++/* it starts at CFG_DFL_GT_REGS but moves later to CFG_GT_REGS */ ++ ++/* Unfortunately, we cant change it while we are in flash, so we initialize it ++ * to the "final" value. This means that any debug_led calls before ++ * board_early_init_f wont work right (like in cpu_init_f). ++ * See also my_remap_gt_regs below. (NTL) ++ */ ++ ++void board_prebootm_init (void); ++unsigned int INTERNAL_REG_BASE_ADDR = CFG_GT_REGS; ++int display_mem_map (void); ++ ++/* ------------------------------------------------------------------------- */ ++ ++/* ++ * This is a version of the GT register space remapping function that ++ * doesn't touch globals (meaning, it's ok to run from flash.) ++ * ++ * Unfortunately, this has the side effect that a writable ++ * INTERNAL_REG_BASE_ADDR is impossible. Oh well. ++ */ ++ ++void my_remap_gt_regs (u32 cur_loc, u32 new_loc) ++{ ++ u32 temp; ++ ++ /* check and see if it's already moved */ ++ temp = in_le32 ((u32 *) (new_loc + INTERNAL_SPACE_DECODE)); ++ if ((temp & 0xffff) == new_loc >> 16) ++ return; ++ ++ temp = (in_le32 ((u32 *) (cur_loc + INTERNAL_SPACE_DECODE)) & ++ 0xffff0000) | (new_loc >> 16); ++ ++ out_le32 ((u32 *) (cur_loc + INTERNAL_SPACE_DECODE), temp); ++ ++ while (GTREGREAD (INTERNAL_SPACE_DECODE) != temp); ++} ++ ++#ifdef CONFIG_PCI ++ ++static void gt_pci_config (void) ++{ ++ unsigned int stat; ++ unsigned int val = 0x00fff864; /* DINK32: BusNum 23:16, DevNum 15:11, */ ++ /* FuncNum 10:8, RegNum 7:2 */ ++ ++ /* ++ * In PCIX mode devices provide their own bus and device numbers. ++ * We query the Discovery II's ++ * config registers by writing ones to the bus and device. ++ * We then update the Virtual register with the correct value for the ++ * bus and device. ++ */ ++ if ((GTREGREAD (PCI_0_MODE) & (BIT4 | BIT5)) != 0) { /* if PCI-X */ ++ GT_REG_WRITE (PCI_0_CONFIG_ADDR, BIT31 | val); ++ ++ GT_REG_READ (PCI_0_CONFIG_DATA_VIRTUAL_REG, &stat); ++ ++ GT_REG_WRITE (PCI_0_CONFIG_ADDR, BIT31 | val); ++ GT_REG_WRITE (PCI_0_CONFIG_DATA_VIRTUAL_REG, ++ (stat & 0xffff0000) | CFG_PCI_IDSEL); ++ ++ } ++ if ((GTREGREAD (PCI_1_MODE) & (BIT4 | BIT5)) != 0) { /* if PCI-X */ ++ GT_REG_WRITE (PCI_1_CONFIG_ADDR, BIT31 | val); ++ GT_REG_READ (PCI_1_CONFIG_DATA_VIRTUAL_REG, &stat); ++ ++ GT_REG_WRITE (PCI_1_CONFIG_ADDR, BIT31 | val); ++ GT_REG_WRITE (PCI_1_CONFIG_DATA_VIRTUAL_REG, ++ (stat & 0xffff0000) | CFG_PCI_IDSEL); ++ } ++ ++ /* Enable master */ ++ PCI_MASTER_ENABLE (0, SELF); ++ PCI_MASTER_ENABLE (1, SELF); ++ ++ /* Enable PCI0/1 Mem0 and IO 0 disable all others */ ++ GT_REG_READ (BASE_ADDR_ENABLE, &stat); ++ stat |= (1 << 11) | (1 << 12) | (1 << 13) | (1 << 16) | (1 << 17) | ++ (1 << 18); ++ stat &= ~((1 << 9) | (1 << 10) | (1 << 14) | (1 << 15)); ++ GT_REG_WRITE (BASE_ADDR_ENABLE, stat); ++ ++ /* ronen: ++ * add write to pci remap registers for 64460. ++ * in 64360 when writing to pci base go and overide remap automaticaly, ++ * in 64460 it doesn't ++ */ ++ GT_REG_WRITE (PCI_0_IO_BASE_ADDR, CFG_PCI0_IO_SPACE >> 16); ++ GT_REG_WRITE (PCI_0I_O_ADDRESS_REMAP, CFG_PCI0_IO_SPACE_PCI >> 16); ++ GT_REG_WRITE (PCI_0_IO_SIZE, (CFG_PCI0_IO_SIZE - 1) >> 16); ++ ++ GT_REG_WRITE (PCI_0_MEMORY0_BASE_ADDR, CFG_PCI0_MEM_BASE >> 16); ++ GT_REG_WRITE (PCI_0MEMORY0_ADDRESS_REMAP, CFG_PCI0_MEM_BASE >> 16); ++ GT_REG_WRITE (PCI_0_MEMORY0_SIZE, (CFG_PCI0_MEM_SIZE - 1) >> 16); ++ ++ GT_REG_WRITE (PCI_1_IO_BASE_ADDR, CFG_PCI1_IO_SPACE >> 16); ++ GT_REG_WRITE (PCI_1I_O_ADDRESS_REMAP, CFG_PCI1_IO_SPACE_PCI >> 16); ++ GT_REG_WRITE (PCI_1_IO_SIZE, (CFG_PCI1_IO_SIZE - 1) >> 16); ++ ++ GT_REG_WRITE (PCI_1_MEMORY0_BASE_ADDR, CFG_PCI1_MEM_BASE >> 16); ++ GT_REG_WRITE (PCI_1MEMORY0_ADDRESS_REMAP, CFG_PCI1_MEM_BASE >> 16); ++ GT_REG_WRITE (PCI_1_MEMORY0_SIZE, (CFG_PCI1_MEM_SIZE - 1) >> 16); ++ ++ /* PCI interface settings */ ++ /* Timeout set to retry forever */ ++ GT_REG_WRITE (PCI_0TIMEOUT_RETRY, 0x0); ++ GT_REG_WRITE (PCI_1TIMEOUT_RETRY, 0x0); ++ ++ /* ronen - enable only CS0 and Internal reg!! */ ++ GT_REG_WRITE (PCI_0BASE_ADDRESS_REGISTERS_ENABLE, 0xfffffdfe); ++ GT_REG_WRITE (PCI_1BASE_ADDRESS_REGISTERS_ENABLE, 0xfffffdfe); ++ ++ /* ronen: ++ * update the pci internal registers base address. ++ */ ++#ifdef MAP_PCI ++ for (stat = 0; stat <= PCI_HOST1; stat++) ++ pciWriteConfigReg (stat, ++ PCI_INTERNAL_REGISTERS_MEMORY_MAPPED_BASE_ADDRESS, ++ SELF, CFG_GT_REGS); ++#endif ++ ++} ++#endif ++ ++/* Setup CPU interface paramaters */ ++static void gt_cpu_config (void) ++{ ++ cpu_t cpu = get_cpu_type (); ++ ulong tmp; ++ ++ /* cpu configuration register */ ++ tmp = GTREGREAD (CPU_CONFIGURATION); ++ /* set the SINGLE_CPU bit see MV64460 */ ++#ifndef CFG_GT_DUAL_CPU /* SINGLE_CPU seems to cause JTAG problems */ ++ tmp |= CPU_CONF_SINGLE_CPU; ++#endif ++ tmp &= ~CPU_CONF_AACK_DELAY_2; ++ tmp |= CPU_CONF_DP_VALID; ++ tmp |= CPU_CONF_AP_VALID; ++ tmp |= CPU_CONF_PIPELINE; ++ GT_REG_WRITE (CPU_CONFIGURATION, tmp); /* Marvell (VXWorks) writes 0x20220FF */ ++ ++ /* CPU master control register */ ++ tmp = GTREGREAD (CPU_MASTER_CONTROL); ++ tmp |= CPU_MAST_CTL_ARB_EN; ++ ++ if ((cpu == CPU_7400) || ++ (cpu == CPU_7410) || (cpu == CPU_7455) || (cpu == CPU_7450)) { ++ ++ tmp |= CPU_MAST_CTL_CLEAN_BLK; ++ tmp |= CPU_MAST_CTL_FLUSH_BLK; ++ ++ } else { ++ /* cleanblock must be cleared for CPUs ++ * that do not support this command (603e, 750) ++ * see Res#1 */ ++ tmp &= ~CPU_MAST_CTL_CLEAN_BLK; ++ tmp &= ~CPU_MAST_CTL_FLUSH_BLK; ++ } ++ GT_REG_WRITE (CPU_MASTER_CONTROL, tmp); ++} ++ ++/* ++ * board_early_init_f. ++ * ++ * set up gal. device mappings, etc. ++ */ ++int board_early_init_f (void) ++{ ++ /* set up the GT the way the kernel wants it ++ * the call to move the GT register space will obviously ++ * fail if it has already been done, but we're going to assume ++ * that if it's not at the power-on location, it's where we put ++ * it last time. (huber) ++ */ ++ ++ my_remap_gt_regs (CFG_DFL_GT_REGS, CFG_GT_REGS); ++ ++#ifdef CONFIG_PCI ++ gt_pci_config (); ++#endif ++ /* mask all external interrupt sources */ ++ GT_REG_WRITE (CPU_INTERRUPT_MASK_REGISTER_LOW, 0); ++ GT_REG_WRITE (CPU_INTERRUPT_MASK_REGISTER_HIGH, 0); ++ /* new in >MV6436x */ ++ GT_REG_WRITE (CPU_INTERRUPT_1_MASK_REGISTER_LOW, 0); ++ GT_REG_WRITE (CPU_INTERRUPT_1_MASK_REGISTER_HIGH, 0); ++ /* --------------------- */ ++ GT_REG_WRITE (PCI_0INTERRUPT_CAUSE_MASK_REGISTER_LOW, 0); ++ GT_REG_WRITE (PCI_0INTERRUPT_CAUSE_MASK_REGISTER_HIGH, 0); ++ GT_REG_WRITE (PCI_1INTERRUPT_CAUSE_MASK_REGISTER_LOW, 0); ++ GT_REG_WRITE (PCI_1INTERRUPT_CAUSE_MASK_REGISTER_HIGH, 0); ++ ++ /* Device and Boot bus settings ++ */ ++ memoryMapDeviceSpace(DEVICE0, 0, 0); ++ GT_REG_WRITE(DEVICE_BANK0PARAMETERS, 0); ++ memoryMapDeviceSpace(DEVICE1, 0, 0); ++ GT_REG_WRITE(DEVICE_BANK1PARAMETERS, 0); ++ memoryMapDeviceSpace(DEVICE2, 0, 0); ++ GT_REG_WRITE(DEVICE_BANK2PARAMETERS, 0); ++ memoryMapDeviceSpace(DEVICE3, 0, 0); ++ GT_REG_WRITE(DEVICE_BANK3PARAMETERS, 0); ++ ++ GT_REG_WRITE(DEVICE_BOOT_BANK_PARAMETERS, CFG_BOOT_PAR); ++ ++ gt_cpu_config(); ++ ++ /* MPP setup */ ++ GT_REG_WRITE (MPP_CONTROL0, CFG_MPP_CONTROL_0); ++ GT_REG_WRITE (MPP_CONTROL1, CFG_MPP_CONTROL_1); ++ GT_REG_WRITE (MPP_CONTROL2, CFG_MPP_CONTROL_2); ++ GT_REG_WRITE (MPP_CONTROL3, CFG_MPP_CONTROL_3); ++ ++ GT_REG_WRITE (GPP_LEVEL_CONTROL, CFG_GPP_LEVEL_CONTROL); ++ ++ return 0; ++} ++ ++/* various things to do after relocation */ ++ ++int misc_init_r () ++{ ++ u8 val; ++ ++ icache_enable (); ++#ifdef CFG_L2 ++ l2cache_enable (); ++#endif ++#ifdef CONFIG_MPSC ++ mpsc_sdma_init (); ++ mpsc_init2 (); ++#endif ++ ++ /* ++ * Enable trickle changing in RTC upon powerup ++ * No diode, 250 ohm series resistor ++ */ ++ val = 0xa5; ++ i2c_write(CFG_I2C_RTC_ADDR, 8, 1, &val, 1); ++ ++ return 0; ++} ++ ++int board_early_init_r(void) ++{ ++ /* now relocate the debug serial driver */ ++ mpsc_putchar += gd->reloc_off; ++ mpsc_getchar += gd->reloc_off; ++ mpsc_test_char += gd->reloc_off; ++ ++ return 0; ++} ++ ++void after_reloc (ulong dest_addr, gd_t * gd) ++{ ++ memoryMapDeviceSpace (BOOT_DEVICE, CFG_BOOT_SPACE, CFG_BOOT_SIZE); ++ ++/* display_mem_map(); */ ++ ++ /* now, jump to the main U-Boot board init code */ ++ board_init_r (gd, dest_addr); ++ /* NOTREACHED */ ++} ++ ++/* ++ * Check Board Identity: ++ * right now, assume borad type. (there is just one...after all) ++ */ ++ ++int checkboard (void) ++{ ++ char *s = getenv("serial#"); ++ ++ printf("Board: %s", CFG_BOARD_NAME); ++ ++ if (s != NULL) { ++ puts(", serial# "); ++ puts(s); ++ } ++ putc('\n'); ++ ++ return (0); ++} ++ ++/* utility functions */ ++void debug_led (int led, int mode) ++{ ++} ++ ++int display_mem_map (void) ++{ ++ int i, j; ++ unsigned int base, size, width; ++ ++ /* SDRAM */ ++ printf ("SD (DDR) RAM\n"); ++ for (i = 0; i <= BANK3; i++) { ++ base = memoryGetBankBaseAddress (i); ++ size = memoryGetBankSize (i); ++ if (size != 0) ++ printf ("BANK%d: base - 0x%08x\tsize - %dM bytes\n", ++ i, base, size >> 20); ++ } ++#ifdef CONFIG_PCI ++ /* CPU's PCI windows */ ++ for (i = 0; i <= PCI_HOST1; i++) { ++ printf ("\nCPU's PCI %d windows\n", i); ++ base = pciGetSpaceBase (i, PCI_IO); ++ size = pciGetSpaceSize (i, PCI_IO); ++ printf (" IO: base - 0x%08x\tsize - %dM bytes\n", base, ++ size >> 20); ++ /* ronen currently only first PCI MEM is used 3 */ ++ for (j = 0; j <= PCI_REGION0; j++) { ++ base = pciGetSpaceBase (i, j); ++ size = pciGetSpaceSize (i, j); ++ printf ("MEMORY %d: base - 0x%08x\tsize - %dM bytes\n", ++ j, base, size >> 20); ++ } ++ } ++#endif /* of CONFIG_PCI */ ++ ++ /* Bootrom */ ++ base = memoryGetDeviceBaseAddress (BOOT_DEVICE); /* Boot */ ++ size = memoryGetDeviceSize (BOOT_DEVICE); ++ width = memoryGetDeviceWidth (BOOT_DEVICE) * 8; ++ printf (" BOOT: base - 0x%08x size - %dM bytes\twidth - %d bits\t- FLASH\n", ++ base, size >> 20, width); ++ ++ return (0); ++} ++ ++/* DRAM check routines copied from gw8260 */ ++ ++#if defined (CFG_DRAM_TEST) ++ ++/*********************************************************************/ ++/* NAME: move64() - moves a double word (64-bit) */ ++/* */ ++/* DESCRIPTION: */ ++/* this function performs a double word move from the data at */ ++/* the source pointer to the location at the destination pointer. */ ++/* */ ++/* INPUTS: */ ++/* unsigned long long *src - pointer to data to move */ ++/* */ ++/* OUTPUTS: */ ++/* unsigned long long *dest - pointer to locate to move data */ ++/* */ ++/* RETURNS: */ ++/* None */ ++/* */ ++/* RESTRICTIONS/LIMITATIONS: */ ++/* May cloober fr0. */ ++/* */ ++/*********************************************************************/ ++static void move64 (unsigned long long *src, unsigned long long *dest) ++{ ++ asm ("lfd 0, 0(3)\n\t" /* fpr0 = *scr */ ++ "stfd 0, 0(4)" /* *dest = fpr0 */ ++ : : : "fr0"); /* Clobbers fr0 */ ++ return; ++} ++ ++ ++#if defined (CFG_DRAM_TEST_DATA) ++ ++unsigned long long pattern[] = { ++ 0xaaaaaaaaaaaaaaaaULL, ++ 0xccccccccccccccccULL, ++ 0xf0f0f0f0f0f0f0f0ULL, ++ 0xff00ff00ff00ff00ULL, ++ 0xffff0000ffff0000ULL, ++ 0xffffffff00000000ULL, ++ 0x00000000ffffffffULL, ++ 0x0000ffff0000ffffULL, ++ 0x00ff00ff00ff00ffULL, ++ 0x0f0f0f0f0f0f0f0fULL, ++ 0x3333333333333333ULL, ++ 0x5555555555555555ULL ++}; ++ ++/*********************************************************************/ ++/* NAME: mem_test_data() - test data lines for shorts and opens */ ++/* */ ++/* DESCRIPTION: */ ++/* Tests data lines for shorts and opens by forcing adjacent data */ ++/* to opposite states. Because the data lines could be routed in */ ++/* an arbitrary manner the must ensure test patterns ensure that */ ++/* every case is tested. By using the following series of binary */ ++/* patterns every combination of adjacent bits is test regardless */ ++/* of routing. */ ++/* */ ++/* ...101010101010101010101010 */ ++/* ...110011001100110011001100 */ ++/* ...111100001111000011110000 */ ++/* ...111111110000000011111111 */ ++/* */ ++/* Carrying this out, gives us six hex patterns as follows: */ ++/* */ ++/* 0xaaaaaaaaaaaaaaaa */ ++/* 0xcccccccccccccccc */ ++/* 0xf0f0f0f0f0f0f0f0 */ ++/* 0xff00ff00ff00ff00 */ ++/* 0xffff0000ffff0000 */ ++/* 0xffffffff00000000 */ ++/* */ ++/* The number test patterns will always be given by: */ ++/* */ ++/* log(base 2)(number data bits) = log2 (64) = 6 */ ++/* */ ++/* To test for short and opens to other signals on our boards. we */ ++/* simply */ ++/* test with the 1's complemnt of the paterns as well. */ ++/* */ ++/* OUTPUTS: */ ++/* Displays failing test pattern */ ++/* */ ++/* RETURNS: */ ++/* 0 - Passed test */ ++/* 1 - Failed test */ ++/* */ ++/* RESTRICTIONS/LIMITATIONS: */ ++/* Assumes only one one SDRAM bank */ ++/* */ ++/*********************************************************************/ ++int mem_test_data (void) ++{ ++ unsigned long long *pmem = (unsigned long long *) CFG_MEMTEST_START; ++ unsigned long long temp64 = 0; ++ int num_patterns = sizeof (pattern) / sizeof (pattern[0]); ++ int i; ++ unsigned int hi, lo; ++ ++ for (i = 0; i < num_patterns; i++) { ++ move64 (&(pattern[i]), pmem); ++ move64 (pmem, &temp64); ++ ++ /* hi = (temp64>>32) & 0xffffffff; */ ++ /* lo = temp64 & 0xffffffff; */ ++ /* printf("\ntemp64 = 0x%08x%08x", hi, lo); */ ++ ++ hi = (pattern[i] >> 32) & 0xffffffff; ++ lo = pattern[i] & 0xffffffff; ++ /* printf("\npattern[%d] = 0x%08x%08x", i, hi, lo); */ ++ ++ if (temp64 != pattern[i]) { ++ printf ("\n Data Test Failed, pattern 0x%08x%08x", ++ hi, lo); ++ return 1; ++ } ++ } ++ ++ return 0; ++} ++#endif /* CFG_DRAM_TEST_DATA */ ++ ++#if defined (CFG_DRAM_TEST_ADDRESS) ++/*********************************************************************/ ++/* NAME: mem_test_address() - test address lines */ ++/* */ ++/* DESCRIPTION: */ ++/* This function performs a test to verify that each word im */ ++/* memory is uniquly addressable. The test sequence is as follows: */ ++/* */ ++/* 1) write the address of each word to each word. */ ++/* 2) verify that each location equals its address */ ++/* */ ++/* OUTPUTS: */ ++/* Displays failing test pattern and address */ ++/* */ ++/* RETURNS: */ ++/* 0 - Passed test */ ++/* 1 - Failed test */ ++/* */ ++/* RESTRICTIONS/LIMITATIONS: */ ++/* */ ++/* */ ++/*********************************************************************/ ++int mem_test_address (void) ++{ ++ volatile unsigned int *pmem = ++ (volatile unsigned int *) CFG_MEMTEST_START; ++ const unsigned int size = (CFG_MEMTEST_END - CFG_MEMTEST_START) / 4; ++ unsigned int i; ++ ++ /* write address to each location */ ++ for (i = 0; i < size; i++) ++ pmem[i] = i; ++ ++ /* verify each loaction */ ++ for (i = 0; i < size; i++) { ++ if (pmem[i] != i) { ++ printf ("\n Address Test Failed at 0x%x", i); ++ return 1; ++ } ++ } ++ return 0; ++} ++#endif /* CFG_DRAM_TEST_ADDRESS */ ++ ++#if defined (CFG_DRAM_TEST_WALK) ++/*********************************************************************/ ++/* NAME: mem_march() - memory march */ ++/* */ ++/* DESCRIPTION: */ ++/* Marches up through memory. At each location verifies rmask if */ ++/* read = 1. At each location write wmask if write = 1. Displays */ ++/* failing address and pattern. */ ++/* */ ++/* INPUTS: */ ++/* volatile unsigned long long * base - start address of test */ ++/* unsigned int size - number of dwords(64-bit) to test */ ++/* unsigned long long rmask - read verify mask */ ++/* unsigned long long wmask - wrtie verify mask */ ++/* short read - verifies rmask if read = 1 */ ++/* short write - writes wmask if write = 1 */ ++/* */ ++/* OUTPUTS: */ ++/* Displays failing test pattern and address */ ++/* */ ++/* RETURNS: */ ++/* 0 - Passed test */ ++/* 1 - Failed test */ ++/* */ ++/* RESTRICTIONS/LIMITATIONS: */ ++/* */ ++/* */ ++/*********************************************************************/ ++int mem_march (volatile unsigned long long *base, ++ unsigned int size, ++ unsigned long long rmask, ++ unsigned long long wmask, short read, short write) ++{ ++ unsigned int i; ++ unsigned long long temp = 0; ++ unsigned int hitemp, lotemp, himask, lomask; ++ ++ for (i = 0; i < size; i++) { ++ if (read != 0) { ++ /* temp = base[i]; */ ++ move64 ((unsigned long long *) &(base[i]), &temp); ++ if (rmask != temp) { ++ hitemp = (temp >> 32) & 0xffffffff; ++ lotemp = temp & 0xffffffff; ++ himask = (rmask >> 32) & 0xffffffff; ++ lomask = rmask & 0xffffffff; ++ ++ printf ("\n Walking one's test failed: address = 0x%08x," "\n\texpected 0x%08x%08x, found 0x%08x%08x", i << 3, himask, lomask, hitemp, lotemp); ++ return 1; ++ } ++ } ++ if (write != 0) { ++ /* base[i] = wmask; */ ++ move64 (&wmask, (unsigned long long *) &(base[i])); ++ } ++ } ++ return 0; ++} ++#endif /* CFG_DRAM_TEST_WALK */ ++ ++/*********************************************************************/ ++/* NAME: mem_test_walk() - a simple walking ones test */ ++/* */ ++/* DESCRIPTION: */ ++/* Performs a walking ones through entire physical memory. The */ ++/* test uses as series of memory marches, mem_march(), to verify */ ++/* and write the test patterns to memory. The test sequence is as */ ++/* follows: */ ++/* 1) march writing 0000...0001 */ ++/* 2) march verifying 0000...0001 , writing 0000...0010 */ ++/* 3) repeat step 2 shifting masks left 1 bit each time unitl */ ++/* the write mask equals 1000...0000 */ ++/* 4) march verifying 1000...0000 */ ++/* The test fails if any of the memory marches return a failure. */ ++/* */ ++/* OUTPUTS: */ ++/* Displays which pass on the memory test is executing */ ++/* */ ++/* RETURNS: */ ++/* 0 - Passed test */ ++/* 1 - Failed test */ ++/* */ ++/* RESTRICTIONS/LIMITATIONS: */ ++/* */ ++/* */ ++/*********************************************************************/ ++int mem_test_walk (void) ++{ ++ unsigned long long mask; ++ volatile unsigned long long *pmem = ++ (volatile unsigned long long *) CFG_MEMTEST_START; ++ const unsigned long size = (CFG_MEMTEST_END - CFG_MEMTEST_START) / 8; ++ ++ unsigned int i; ++ ++ mask = 0x01; ++ ++ printf ("Initial Pass"); ++ mem_march (pmem, size, 0x0, 0x1, 0, 1); ++ ++ printf ("\b\b\b\b\b\b\b\b\b\b\b\b"); ++ printf (" "); ++ printf (" "); ++ printf ("\b\b\b\b\b\b\b\b\b\b\b\b"); ++ ++ for (i = 0; i < 63; i++) { ++ printf ("Pass %2d", i + 2); ++ if (mem_march (pmem, size, mask, mask << 1, 1, 1) != 0) { ++ /*printf("mask: 0x%x, pass: %d, ", mask, i); */ ++ return 1; ++ } ++ mask = mask << 1; ++ printf ("\b\b\b\b\b\b\b"); ++ } ++ ++ printf ("Last Pass"); ++ if (mem_march (pmem, size, 0, mask, 0, 1) != 0) { ++ /* printf("mask: 0x%x", mask); */ ++ return 1; ++ } ++ printf ("\b\b\b\b\b\b\b\b\b"); ++ printf (" "); ++ printf ("\b\b\b\b\b\b\b\b\b"); ++ ++ return 0; ++} ++ ++/*********************************************************************/ ++/* NAME: testdram() - calls any enabled memory tests */ ++/* */ ++/* DESCRIPTION: */ ++/* Runs memory tests if the environment test variables are set to */ ++/* 'y'. */ ++/* */ ++/* INPUTS: */ ++/* testdramdata - If set to 'y', data test is run. */ ++/* testdramaddress - If set to 'y', address test is run. */ ++/* testdramwalk - If set to 'y', walking ones test is run */ ++/* */ ++/* OUTPUTS: */ ++/* None */ ++/* */ ++/* RETURNS: */ ++/* 0 - Passed test */ ++/* 1 - Failed test */ ++/* */ ++/* RESTRICTIONS/LIMITATIONS: */ ++/* */ ++/* */ ++/*********************************************************************/ ++int testdram (void) ++{ ++ char *s; ++ int rundata = 0; ++ int runaddress = 0; ++ int runwalk = 0; ++ ++#ifdef CFG_DRAM_TEST_DATA ++ s = getenv ("testdramdata"); ++ rundata = (s && (*s == 'y')) ? 1 : 0; ++#endif ++#ifdef CFG_DRAM_TEST_ADDRESS ++ s = getenv ("testdramaddress"); ++ runaddress = (s && (*s == 'y')) ? 1 : 0; ++#endif ++#ifdef CFG_DRAM_TEST_WALK ++ s = getenv ("testdramwalk"); ++ runwalk = (s && (*s == 'y')) ? 1 : 0; ++#endif ++ ++ if ((rundata == 1) || (runaddress == 1) || (runwalk == 1)) ++ printf ("Testing RAM from 0x%08x to 0x%08x ... " ++ "(don't panic... that will take a moment !!!!)\n", ++ CFG_MEMTEST_START, CFG_MEMTEST_END); ++#ifdef CFG_DRAM_TEST_DATA ++ if (rundata == 1) { ++ printf ("Test DATA ... "); ++ if (mem_test_data () == 1) { ++ printf ("failed \n"); ++ return 1; ++ } else ++ printf ("ok \n"); ++ } ++#endif ++#ifdef CFG_DRAM_TEST_ADDRESS ++ if (runaddress == 1) { ++ printf ("Test ADDRESS ... "); ++ if (mem_test_address () == 1) { ++ printf ("failed \n"); ++ return 1; ++ } else ++ printf ("ok \n"); ++ } ++#endif ++#ifdef CFG_DRAM_TEST_WALK ++ if (runwalk == 1) { ++ printf ("Test WALKING ONEs ... "); ++ if (mem_test_walk () == 1) { ++ printf ("failed \n"); ++ return 1; ++ } else ++ printf ("ok \n"); ++ } ++#endif ++ if ((rundata == 1) || (runaddress == 1) || (runwalk == 1)) ++ printf ("passed\n"); ++ return 0; ++ ++} ++#endif /* CFG_DRAM_TEST */ ++ ++/* ronen - the below functions are used by the bootm function */ ++/* - we map the base register to fbe00000 (same mapping as in the LSP) */ ++/* - we turn off the RX gig dmas - to prevent the dma from overunning */ ++/* the kernel data areas. */ ++/* - we diable and invalidate the icache and dcache. */ ++void my_remap_gt_regs_bootm (u32 cur_loc, u32 new_loc) ++{ ++ u32 temp; ++ ++ temp = in_le32 ((u32 *) (new_loc + INTERNAL_SPACE_DECODE)); ++ if ((temp & 0xffff) == new_loc >> 16) ++ return; ++ ++ temp = (in_le32 ((u32 *) (cur_loc + INTERNAL_SPACE_DECODE)) & ++ 0xffff0000) | (new_loc >> 16); ++ ++ out_le32 ((u32 *) (cur_loc + INTERNAL_SPACE_DECODE), temp); ++ ++ while ((WORD_SWAP (*((volatile unsigned int *) (NONE_CACHEABLE | ++ new_loc | ++ (INTERNAL_SPACE_DECODE))))) ++ != temp); ++ ++} +diff -Naupr u-boot-1.1.6/board/prodrive/p3mx/pci.c u-boot-1.1.6-fsl-1/board/prodrive/p3mx/pci.c +--- u-boot-1.1.6/board/prodrive/p3mx/pci.c 1969-12-31 18:00:00.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/board/prodrive/p3mx/pci.c 2006-12-06 10:33:49.000000000 -0600 +@@ -0,0 +1,1025 @@ ++/* ++ * (C) Copyright 2000 ++ * Wolfgang Denk, DENX Software Engineering, wd@denx.de. ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ * ++ */ ++/* PCI.c - PCI functions */ ++ ++ ++#include <common.h> ++#ifdef CONFIG_PCI ++#include <pci.h> ++ ++#ifdef CONFIG_PCI_PNP ++void pciauto_config_init(struct pci_controller *hose); ++int pciauto_region_allocate(struct pci_region* res, unsigned int size, unsigned int *bar); ++#endif ++ ++#include "../../Marvell/include/pci.h" ++ ++#undef DEBUG ++#undef IDE_SET_NATIVE_MODE ++static unsigned int local_buses[] = { 0, 0 }; ++ ++static const unsigned char pci_irq_swizzle[2][PCI_MAX_DEVICES] = { ++ {0, 0, 0, 0, 0, 0, 0, 27, 27, [9 ... PCI_MAX_DEVICES - 1] = 0 }, ++ {0, 0, 0, 0, 0, 0, 0, 29, 29, [9 ... PCI_MAX_DEVICES - 1] = 0 }, ++}; ++ ++#ifdef CONFIG_USE_CPCIDVI ++typedef struct { ++ unsigned int base; ++ unsigned int init; ++} GT_CPCIDVI_ROM_T; ++ ++static GT_CPCIDVI_ROM_T gt_cpcidvi_rom = {0, 0}; ++#endif ++ ++#ifdef DEBUG ++static const unsigned int pci_bus_list[] = { PCI_0_MODE, PCI_1_MODE }; ++static void gt_pci_bus_mode_display (PCI_HOST host) ++{ ++ unsigned int mode; ++ ++ ++ mode = (GTREGREAD (pci_bus_list[host]) & (BIT4 | BIT5)) >> 4; ++ switch (mode) { ++ case 0: ++ printf ("PCI %d bus mode: Conventional PCI\n", host); ++ break; ++ case 1: ++ printf ("PCI %d bus mode: 66 Mhz PCIX\n", host); ++ break; ++ case 2: ++ printf ("PCI %d bus mode: 100 Mhz PCIX\n", host); ++ break; ++ case 3: ++ printf ("PCI %d bus mode: 133 Mhz PCIX\n", host); ++ break; ++ default: ++ printf ("Unknown BUS %d\n", mode); ++ } ++} ++#endif ++ ++static const unsigned int pci_p2p_configuration_reg[] = { ++ PCI_0P2P_CONFIGURATION, PCI_1P2P_CONFIGURATION ++}; ++ ++static const unsigned int pci_configuration_address[] = { ++ PCI_0CONFIGURATION_ADDRESS, PCI_1CONFIGURATION_ADDRESS ++}; ++ ++static const unsigned int pci_configuration_data[] = { ++ PCI_0CONFIGURATION_DATA_VIRTUAL_REGISTER, ++ PCI_1CONFIGURATION_DATA_VIRTUAL_REGISTER ++}; ++ ++static const unsigned int pci_error_cause_reg[] = { ++ PCI_0ERROR_CAUSE, PCI_1ERROR_CAUSE ++}; ++ ++static const unsigned int pci_arbiter_control[] = { ++ PCI_0ARBITER_CONTROL, PCI_1ARBITER_CONTROL ++}; ++ ++static const unsigned int pci_address_space_en[] = { ++ PCI_0_BASE_ADDR_REG_ENABLE, PCI_1_BASE_ADDR_REG_ENABLE ++}; ++ ++static const unsigned int pci_snoop_control_base_0_low[] = { ++ PCI_0SNOOP_CONTROL_BASE_0_LOW, PCI_1SNOOP_CONTROL_BASE_0_LOW ++}; ++static const unsigned int pci_snoop_control_top_0[] = { ++ PCI_0SNOOP_CONTROL_TOP_0, PCI_1SNOOP_CONTROL_TOP_0 ++}; ++ ++static const unsigned int pci_access_control_base_0_low[] = { ++ PCI_0ACCESS_CONTROL_BASE_0_LOW, PCI_1ACCESS_CONTROL_BASE_0_LOW ++}; ++static const unsigned int pci_access_control_top_0[] = { ++ PCI_0ACCESS_CONTROL_TOP_0, PCI_1ACCESS_CONTROL_TOP_0 ++}; ++ ++static const unsigned int pci_scs_bank_size[2][4] = { ++ {PCI_0SCS_0_BANK_SIZE, PCI_0SCS_1_BANK_SIZE, ++ PCI_0SCS_2_BANK_SIZE, PCI_0SCS_3_BANK_SIZE}, ++ {PCI_1SCS_0_BANK_SIZE, PCI_1SCS_1_BANK_SIZE, ++ PCI_1SCS_2_BANK_SIZE, PCI_1SCS_3_BANK_SIZE} ++}; ++ ++static const unsigned int pci_p2p_configuration[] = { ++ PCI_0P2P_CONFIGURATION, PCI_1P2P_CONFIGURATION ++}; ++ ++ ++/******************************************************************** ++* pciWriteConfigReg - Write to a PCI configuration register ++* - Make sure the GT is configured as a master before writing ++* to another device on the PCI. ++* - The function takes care of Big/Little endian conversion. ++* ++* ++* Inputs: unsigned int regOffset: The register offset as it apears in the GT spec ++* (or any other PCI device spec) ++* pciDevNum: The device number needs to be addressed. ++* ++* Configuration Address 0xCF8: ++* ++* 31 30 24 23 16 15 11 10 8 7 2 0 <=bit Number ++* |congif|Reserved| Bus |Device|Function|Register|00| ++* |Enable| |Number|Number| Number | Number | | <=field Name ++* ++*********************************************************************/ ++void pciWriteConfigReg (PCI_HOST host, unsigned int regOffset, ++ unsigned int pciDevNum, unsigned int data) ++{ ++ volatile unsigned int DataForAddrReg; ++ unsigned int functionNum; ++ unsigned int busNum = 0; ++ unsigned int addr; ++ ++ if (pciDevNum > 32) /* illegal device Number */ ++ return; ++ if (pciDevNum == SELF) { /* configure our configuration space. */ ++ pciDevNum = ++ (GTREGREAD (pci_p2p_configuration_reg[host]) >> 24) & ++ 0x1f; ++ busNum = GTREGREAD (pci_p2p_configuration_reg[host]) & ++ 0xff0000; ++ } ++ functionNum = regOffset & 0x00000700; ++ pciDevNum = pciDevNum << 11; ++ regOffset = regOffset & 0xfc; ++ DataForAddrReg = ++ (regOffset | pciDevNum | functionNum | busNum) | BIT31; ++ GT_REG_WRITE (pci_configuration_address[host], DataForAddrReg); ++ GT_REG_READ (pci_configuration_address[host], &addr); ++ if (addr != DataForAddrReg) ++ return; ++ GT_REG_WRITE (pci_configuration_data[host], data); ++} ++ ++/******************************************************************** ++* pciReadConfigReg - Read from a PCI0 configuration register ++* - Make sure the GT is configured as a master before reading ++* from another device on the PCI. ++* - The function takes care of Big/Little endian conversion. ++* INPUTS: regOffset: The register offset as it apears in the GT spec (or PCI ++* spec) ++* pciDevNum: The device number needs to be addressed. ++* RETURNS: data , if the data == 0xffffffff check the master abort bit in the ++* cause register to make sure the data is valid ++* ++* Configuration Address 0xCF8: ++* ++* 31 30 24 23 16 15 11 10 8 7 2 0 <=bit Number ++* |congif|Reserved| Bus |Device|Function|Register|00| ++* |Enable| |Number|Number| Number | Number | | <=field Name ++* ++*********************************************************************/ ++unsigned int pciReadConfigReg (PCI_HOST host, unsigned int regOffset, ++ unsigned int pciDevNum) ++{ ++ volatile unsigned int DataForAddrReg; ++ unsigned int data; ++ unsigned int functionNum; ++ unsigned int busNum = 0; ++ ++ if (pciDevNum > 32) /* illegal device Number */ ++ return 0xffffffff; ++ if (pciDevNum == SELF) { /* configure our configuration space. */ ++ pciDevNum = ++ (GTREGREAD (pci_p2p_configuration_reg[host]) >> 24) & ++ 0x1f; ++ busNum = GTREGREAD (pci_p2p_configuration_reg[host]) & ++ 0xff0000; ++ } ++ functionNum = regOffset & 0x00000700; ++ pciDevNum = pciDevNum << 11; ++ regOffset = regOffset & 0xfc; ++ DataForAddrReg = ++ (regOffset | pciDevNum | functionNum | busNum) | BIT31; ++ GT_REG_WRITE (pci_configuration_address[host], DataForAddrReg); ++ GT_REG_READ (pci_configuration_address[host], &data); ++ if (data != DataForAddrReg) ++ return 0xffffffff; ++ GT_REG_READ (pci_configuration_data[host], &data); ++ return data; ++} ++ ++/******************************************************************** ++* pciOverBridgeWriteConfigReg - Write to a PCI configuration register where ++* the agent is placed on another Bus. For more ++* information read P2P in the PCI spec. ++* ++* Inputs: unsigned int regOffset - The register offset as it apears in the ++* GT spec (or any other PCI device spec). ++* unsigned int pciDevNum - The device number needs to be addressed. ++* unsigned int busNum - On which bus does the Target agent connect ++* to. ++* unsigned int data - data to be written. ++* ++* Configuration Address 0xCF8: ++* ++* 31 30 24 23 16 15 11 10 8 7 2 0 <=bit Number ++* |congif|Reserved| Bus |Device|Function|Register|01| ++* |Enable| |Number|Number| Number | Number | | <=field Name ++* ++* The configuration Address is configure as type-I (bits[1:0] = '01') due to ++* PCI spec referring to P2P. ++* ++*********************************************************************/ ++void pciOverBridgeWriteConfigReg (PCI_HOST host, ++ unsigned int regOffset, ++ unsigned int pciDevNum, ++ unsigned int busNum, unsigned int data) ++{ ++ unsigned int DataForReg; ++ unsigned int functionNum; ++ ++ functionNum = regOffset & 0x00000700; ++ pciDevNum = pciDevNum << 11; ++ regOffset = regOffset & 0xff; ++ busNum = busNum << 16; ++ if (pciDevNum == SELF) { /* This board */ ++ DataForReg = (regOffset | pciDevNum | functionNum) | BIT0; ++ } else { ++ DataForReg = (regOffset | pciDevNum | functionNum | busNum) | ++ BIT31 | BIT0; ++ } ++ GT_REG_WRITE (pci_configuration_address[host], DataForReg); ++ GT_REG_WRITE (pci_configuration_data[host], data); ++} ++ ++ ++/******************************************************************** ++* pciOverBridgeReadConfigReg - Read from a PCIn configuration register where ++* the agent target locate on another PCI bus. ++* - Make sure the GT is configured as a master ++* before reading from another device on the PCI. ++* - The function takes care of Big/Little endian ++* conversion. ++* INPUTS: regOffset: The register offset as it apears in the GT spec (or PCI ++* spec). (configuration register offset.) ++* pciDevNum: The device number needs to be addressed. ++* busNum: the Bus number where the agent is place. ++* RETURNS: data , if the data == 0xffffffff check the master abort bit in the ++* cause register to make sure the data is valid ++* ++* Configuration Address 0xCF8: ++* ++* 31 30 24 23 16 15 11 10 8 7 2 0 <=bit Number ++* |congif|Reserved| Bus |Device|Function|Register|01| ++* |Enable| |Number|Number| Number | Number | | <=field Name ++* ++*********************************************************************/ ++unsigned int pciOverBridgeReadConfigReg (PCI_HOST host, ++ unsigned int regOffset, ++ unsigned int pciDevNum, ++ unsigned int busNum) ++{ ++ unsigned int DataForReg; ++ unsigned int data; ++ unsigned int functionNum; ++ ++ functionNum = regOffset & 0x00000700; ++ pciDevNum = pciDevNum << 11; ++ regOffset = regOffset & 0xff; ++ busNum = busNum << 16; ++ if (pciDevNum == SELF) { /* This board */ ++ DataForReg = (regOffset | pciDevNum | functionNum) | BIT31; ++ } else { /* agent on another bus */ ++ ++ DataForReg = (regOffset | pciDevNum | functionNum | busNum) | ++ BIT0 | BIT31; ++ } ++ GT_REG_WRITE (pci_configuration_address[host], DataForReg); ++ GT_REG_READ (pci_configuration_data[host], &data); ++ return data; ++} ++ ++ ++/******************************************************************** ++* pciGetRegOffset - Gets the register offset for this region config. ++* ++* INPUT: Bus, Region - The bus and region we ask for its base address. ++* OUTPUT: N/A ++* RETURNS: PCI register base address ++*********************************************************************/ ++static unsigned int pciGetRegOffset (PCI_HOST host, PCI_REGION region) ++{ ++ switch (host) { ++ case PCI_HOST0: ++ switch (region) { ++ case PCI_IO: ++ return PCI_0I_O_LOW_DECODE_ADDRESS; ++ case PCI_REGION0: ++ return PCI_0MEMORY0_LOW_DECODE_ADDRESS; ++ case PCI_REGION1: ++ return PCI_0MEMORY1_LOW_DECODE_ADDRESS; ++ case PCI_REGION2: ++ return PCI_0MEMORY2_LOW_DECODE_ADDRESS; ++ case PCI_REGION3: ++ return PCI_0MEMORY3_LOW_DECODE_ADDRESS; ++ } ++ case PCI_HOST1: ++ switch (region) { ++ case PCI_IO: ++ return PCI_1I_O_LOW_DECODE_ADDRESS; ++ case PCI_REGION0: ++ return PCI_1MEMORY0_LOW_DECODE_ADDRESS; ++ case PCI_REGION1: ++ return PCI_1MEMORY1_LOW_DECODE_ADDRESS; ++ case PCI_REGION2: ++ return PCI_1MEMORY2_LOW_DECODE_ADDRESS; ++ case PCI_REGION3: ++ return PCI_1MEMORY3_LOW_DECODE_ADDRESS; ++ } ++ } ++ return PCI_0MEMORY0_LOW_DECODE_ADDRESS; ++} ++ ++static unsigned int pciGetRemapOffset (PCI_HOST host, PCI_REGION region) ++{ ++ switch (host) { ++ case PCI_HOST0: ++ switch (region) { ++ case PCI_IO: ++ return PCI_0I_O_ADDRESS_REMAP; ++ case PCI_REGION0: ++ return PCI_0MEMORY0_ADDRESS_REMAP; ++ case PCI_REGION1: ++ return PCI_0MEMORY1_ADDRESS_REMAP; ++ case PCI_REGION2: ++ return PCI_0MEMORY2_ADDRESS_REMAP; ++ case PCI_REGION3: ++ return PCI_0MEMORY3_ADDRESS_REMAP; ++ } ++ case PCI_HOST1: ++ switch (region) { ++ case PCI_IO: ++ return PCI_1I_O_ADDRESS_REMAP; ++ case PCI_REGION0: ++ return PCI_1MEMORY0_ADDRESS_REMAP; ++ case PCI_REGION1: ++ return PCI_1MEMORY1_ADDRESS_REMAP; ++ case PCI_REGION2: ++ return PCI_1MEMORY2_ADDRESS_REMAP; ++ case PCI_REGION3: ++ return PCI_1MEMORY3_ADDRESS_REMAP; ++ } ++ } ++ return PCI_0MEMORY0_ADDRESS_REMAP; ++} ++ ++/******************************************************************** ++* pciGetBaseAddress - Gets the base address of a PCI. ++* - If the PCI size is 0 then this base address has no meaning!!! ++* ++* ++* INPUT: Bus, Region - The bus and region we ask for its base address. ++* OUTPUT: N/A ++* RETURNS: PCI base address. ++*********************************************************************/ ++unsigned int pciGetBaseAddress (PCI_HOST host, PCI_REGION region) ++{ ++ unsigned int regBase; ++ unsigned int regEnd; ++ unsigned int regOffset = pciGetRegOffset (host, region); ++ ++ GT_REG_READ (regOffset, ®Base); ++ GT_REG_READ (regOffset + 8, ®End); ++ ++ if (regEnd <= regBase) ++ return 0xffffffff; /* ERROR !!! */ ++ ++ regBase = regBase << 16; ++ return regBase; ++} ++ ++bool pciMapSpace (PCI_HOST host, PCI_REGION region, unsigned int remapBase, ++ unsigned int bankBase, unsigned int bankLength) ++{ ++ unsigned int low = 0xfff; ++ unsigned int high = 0x0; ++ unsigned int regOffset = pciGetRegOffset (host, region); ++ unsigned int remapOffset = pciGetRemapOffset (host, region); ++ ++ if (bankLength != 0) { ++ low = (bankBase >> 16) & 0xffff; ++ high = ((bankBase + bankLength) >> 16) - 1; ++ } ++ ++ GT_REG_WRITE (regOffset, low | (1 << 24)); /* no swapping */ ++ GT_REG_WRITE (regOffset + 8, high); ++ ++ if (bankLength != 0) { /* must do AFTER writing maps */ ++ GT_REG_WRITE (remapOffset, remapBase >> 16); /* sorry, 32 bits only. ++ dont support upper 32 ++ in this driver */ ++ } ++ return true; ++} ++ ++unsigned int pciGetSpaceBase (PCI_HOST host, PCI_REGION region) ++{ ++ unsigned int low; ++ unsigned int regOffset = pciGetRegOffset (host, region); ++ ++ GT_REG_READ (regOffset, &low); ++ return (low & 0xffff) << 16; ++} ++ ++unsigned int pciGetSpaceSize (PCI_HOST host, PCI_REGION region) ++{ ++ unsigned int low, high; ++ unsigned int regOffset = pciGetRegOffset (host, region); ++ ++ GT_REG_READ (regOffset, &low); ++ GT_REG_READ (regOffset + 8, &high); ++ return ((high & 0xffff) + 1) << 16; ++} ++ ++ ++/* ronen - 7/Dec/03*/ ++/******************************************************************** ++* gtPciDisable/EnableInternalBAR - This function enable/disable PCI BARS. ++* Inputs: one of the PCI BAR ++*********************************************************************/ ++void gtPciEnableInternalBAR (PCI_HOST host, PCI_INTERNAL_BAR pciBAR) ++{ ++ RESET_REG_BITS (pci_address_space_en[host], BIT0 << pciBAR); ++} ++ ++void gtPciDisableInternalBAR (PCI_HOST host, PCI_INTERNAL_BAR pciBAR) ++{ ++ SET_REG_BITS (pci_address_space_en[host], BIT0 << pciBAR); ++} ++ ++/******************************************************************** ++* pciMapMemoryBank - Maps PCI_host memory bank "bank" for the slave. ++* ++* Inputs: base and size of PCI SCS ++*********************************************************************/ ++void pciMapMemoryBank (PCI_HOST host, MEMORY_BANK bank, ++ unsigned int pciDramBase, unsigned int pciDramSize) ++{ ++ /*ronen different function for 3rd bank. */ ++ unsigned int offset = (bank < 2) ? bank * 8 : 0x100 + (bank - 2) * 8; ++ ++ pciDramBase = pciDramBase & 0xfffff000; ++ pciDramBase = pciDramBase | (pciReadConfigReg (host, ++ PCI_SCS_0_BASE_ADDRESS ++ + offset, ++ SELF) & 0x00000fff); ++ pciWriteConfigReg (host, PCI_SCS_0_BASE_ADDRESS + offset, SELF, ++ pciDramBase); ++ if (pciDramSize == 0) ++ pciDramSize++; ++ GT_REG_WRITE (pci_scs_bank_size[host][bank], pciDramSize - 1); ++ gtPciEnableInternalBAR (host, bank); ++} ++ ++/******************************************************************** ++* pciSetRegionFeatures - This function modifys one of the 8 regions with ++* feature bits given as an input. ++* - Be advised to check the spec before modifying them. ++* Inputs: PCI_PROTECT_REGION region - one of the eight regions. ++* unsigned int features - See file: pci.h there are defintion for those ++* region features. ++* unsigned int baseAddress - The region base Address. ++* unsigned int topAddress - The region top Address. ++* Returns: false if one of the parameters is erroneous true otherwise. ++*********************************************************************/ ++bool pciSetRegionFeatures (PCI_HOST host, PCI_ACCESS_REGIONS region, ++ unsigned int features, unsigned int baseAddress, ++ unsigned int regionLength) ++{ ++ unsigned int accessLow; ++ unsigned int accessHigh; ++ unsigned int accessTop = baseAddress + regionLength; ++ ++ if (regionLength == 0) { /* close the region. */ ++ pciDisableAccessRegion (host, region); ++ return true; ++ } ++ /* base Address is store is bits [11:0] */ ++ accessLow = (baseAddress & 0xfff00000) >> 20; ++ /* All the features are update according to the defines in pci.h (to be on ++ the safe side we disable bits: [11:0] */ ++ accessLow = accessLow | (features & 0xfffff000); ++ /* write to the Low Access Region register */ ++ GT_REG_WRITE (pci_access_control_base_0_low[host] + 0x10 * region, ++ accessLow); ++ ++ accessHigh = (accessTop & 0xfff00000) >> 20; ++ ++ /* write to the High Access Region register */ ++ GT_REG_WRITE (pci_access_control_top_0[host] + 0x10 * region, ++ accessHigh - 1); ++ return true; ++} ++ ++/******************************************************************** ++* pciDisableAccessRegion - Disable The given Region by writing MAX size ++* to its low Address and MIN size to its high Address. ++* ++* Inputs: PCI_ACCESS_REGIONS region - The region we to be Disabled. ++* Returns: N/A. ++*********************************************************************/ ++void pciDisableAccessRegion (PCI_HOST host, PCI_ACCESS_REGIONS region) ++{ ++ /* writing back the registers default values. */ ++ GT_REG_WRITE (pci_access_control_base_0_low[host] + 0x10 * region, ++ 0x01001fff); ++ GT_REG_WRITE (pci_access_control_top_0[host] + 0x10 * region, 0); ++} ++ ++/******************************************************************** ++* pciArbiterEnable - Enables PCI-0`s Arbitration mechanism. ++* ++* Inputs: N/A ++* Returns: true. ++*********************************************************************/ ++bool pciArbiterEnable (PCI_HOST host) ++{ ++ unsigned int regData; ++ ++ GT_REG_READ (pci_arbiter_control[host], ®Data); ++ GT_REG_WRITE (pci_arbiter_control[host], regData | BIT31); ++ return true; ++} ++ ++/******************************************************************** ++* pciArbiterDisable - Disable PCI-0`s Arbitration mechanism. ++* ++* Inputs: N/A ++* Returns: true ++*********************************************************************/ ++bool pciArbiterDisable (PCI_HOST host) ++{ ++ unsigned int regData; ++ ++ GT_REG_READ (pci_arbiter_control[host], ®Data); ++ GT_REG_WRITE (pci_arbiter_control[host], regData & 0x7fffffff); ++ return true; ++} ++ ++/******************************************************************** ++* pciSetArbiterAgentsPriority - Priority setup for the PCI agents (Hi or Low) ++* ++* Inputs: PCI_AGENT_PRIO internalAgent - priotity for internal agent. ++* PCI_AGENT_PRIO externalAgent0 - priotity for external#0 agent. ++* PCI_AGENT_PRIO externalAgent1 - priotity for external#1 agent. ++* PCI_AGENT_PRIO externalAgent2 - priotity for external#2 agent. ++* PCI_AGENT_PRIO externalAgent3 - priotity for external#3 agent. ++* PCI_AGENT_PRIO externalAgent4 - priotity for external#4 agent. ++* PCI_AGENT_PRIO externalAgent5 - priotity for external#5 agent. ++* Returns: true ++*********************************************************************/ ++bool pciSetArbiterAgentsPriority (PCI_HOST host, PCI_AGENT_PRIO internalAgent, ++ PCI_AGENT_PRIO externalAgent0, ++ PCI_AGENT_PRIO externalAgent1, ++ PCI_AGENT_PRIO externalAgent2, ++ PCI_AGENT_PRIO externalAgent3, ++ PCI_AGENT_PRIO externalAgent4, ++ PCI_AGENT_PRIO externalAgent5) ++{ ++ unsigned int regData; ++ unsigned int writeData; ++ ++ GT_REG_READ (pci_arbiter_control[host], ®Data); ++ writeData = (internalAgent << 7) + (externalAgent0 << 8) + ++ (externalAgent1 << 9) + (externalAgent2 << 10) + ++ (externalAgent3 << 11) + (externalAgent4 << 12) + ++ (externalAgent5 << 13); ++ regData = (regData & 0xffffc07f) | writeData; ++ GT_REG_WRITE (pci_arbiter_control[host], regData & regData); ++ return true; ++} ++ ++/******************************************************************** ++* pciParkingDisable - Park on last option disable, with this function you can ++* disable the park on last mechanism for each agent. ++* disabling this option for all agents results parking ++* on the internal master. ++* ++* Inputs: PCI_AGENT_PARK internalAgent - parking Disable for internal agent. ++* PCI_AGENT_PARK externalAgent0 - parking Disable for external#0 agent. ++* PCI_AGENT_PARK externalAgent1 - parking Disable for external#1 agent. ++* PCI_AGENT_PARK externalAgent2 - parking Disable for external#2 agent. ++* PCI_AGENT_PARK externalAgent3 - parking Disable for external#3 agent. ++* PCI_AGENT_PARK externalAgent4 - parking Disable for external#4 agent. ++* PCI_AGENT_PARK externalAgent5 - parking Disable for external#5 agent. ++* Returns: true ++*********************************************************************/ ++bool pciParkingDisable (PCI_HOST host, PCI_AGENT_PARK internalAgent, ++ PCI_AGENT_PARK externalAgent0, ++ PCI_AGENT_PARK externalAgent1, ++ PCI_AGENT_PARK externalAgent2, ++ PCI_AGENT_PARK externalAgent3, ++ PCI_AGENT_PARK externalAgent4, ++ PCI_AGENT_PARK externalAgent5) ++{ ++ unsigned int regData; ++ unsigned int writeData; ++ ++ GT_REG_READ (pci_arbiter_control[host], ®Data); ++ writeData = (internalAgent << 14) + (externalAgent0 << 15) + ++ (externalAgent1 << 16) + (externalAgent2 << 17) + ++ (externalAgent3 << 18) + (externalAgent4 << 19) + ++ (externalAgent5 << 20); ++ regData = (regData & ~(0x7f << 14)) | writeData; ++ GT_REG_WRITE (pci_arbiter_control[host], regData); ++ return true; ++} ++ ++/******************************************************************** ++* pciEnableBrokenAgentDetection - A master is said to be broken if it fails to ++* respond to grant assertion within a window specified in ++* the input value: 'brokenValue'. ++* ++* Inputs: unsigned char brokenValue - A value which limits the Master to hold the ++* grant without asserting frame. ++* Returns: Error for illegal broken value otherwise true. ++*********************************************************************/ ++bool pciEnableBrokenAgentDetection (PCI_HOST host, unsigned char brokenValue) ++{ ++ unsigned int data; ++ unsigned int regData; ++ ++ if (brokenValue > 0xf) ++ return false; /* brokenValue must be 4 bit */ ++ data = brokenValue << 3; ++ GT_REG_READ (pci_arbiter_control[host], ®Data); ++ regData = (regData & 0xffffff87) | data; ++ GT_REG_WRITE (pci_arbiter_control[host], regData | BIT1); ++ return true; ++} ++ ++/******************************************************************** ++* pciDisableBrokenAgentDetection - This function disable the Broken agent ++* Detection mechanism. ++* NOTE: This operation may cause a dead lock on the ++* pci0 arbitration. ++* ++* Inputs: N/A ++* Returns: true. ++*********************************************************************/ ++bool pciDisableBrokenAgentDetection (PCI_HOST host) ++{ ++ unsigned int regData; ++ ++ GT_REG_READ (pci_arbiter_control[host], ®Data); ++ regData = regData & 0xfffffffd; ++ GT_REG_WRITE (pci_arbiter_control[host], regData); ++ return true; ++} ++ ++/******************************************************************** ++* pciP2PConfig - This function set the PCI_n P2P configurate. ++* For more information on the P2P read PCI spec. ++* ++* Inputs: unsigned int SecondBusLow - Secondery PCI interface Bus Range Lower ++* Boundry. ++* unsigned int SecondBusHigh - Secondry PCI interface Bus Range upper ++* Boundry. ++* unsigned int busNum - The CPI bus number to which the PCI interface ++* is connected. ++* unsigned int devNum - The PCI interface's device number. ++* ++* Returns: true. ++*********************************************************************/ ++bool pciP2PConfig (PCI_HOST host, unsigned int SecondBusLow, ++ unsigned int SecondBusHigh, ++ unsigned int busNum, unsigned int devNum) ++{ ++ unsigned int regData; ++ ++ regData = (SecondBusLow & 0xff) | ((SecondBusHigh & 0xff) << 8) | ++ ((busNum & 0xff) << 16) | ((devNum & 0x1f) << 24); ++ GT_REG_WRITE (pci_p2p_configuration[host], regData); ++ return true; ++} ++ ++/******************************************************************** ++* pciSetRegionSnoopMode - This function modifys one of the 4 regions which ++* supports Cache Coherency in the PCI_n interface. ++* Inputs: region - One of the four regions. ++* snoopType - There is four optional Types: ++* 1. No Snoop. ++* 2. Snoop to WT region. ++* 3. Snoop to WB region. ++* 4. Snoop & Invalidate to WB region. ++* baseAddress - Base Address of this region. ++* regionLength - Region length. ++* Returns: false if one of the parameters is wrong otherwise return true. ++*********************************************************************/ ++bool pciSetRegionSnoopMode (PCI_HOST host, PCI_SNOOP_REGION region, ++ PCI_SNOOP_TYPE snoopType, ++ unsigned int baseAddress, ++ unsigned int regionLength) ++{ ++ unsigned int snoopXbaseAddress; ++ unsigned int snoopXtopAddress; ++ unsigned int data; ++ unsigned int snoopHigh = baseAddress + regionLength; ++ ++ if ((region > PCI_SNOOP_REGION3) || (snoopType > PCI_SNOOP_WB)) ++ return false; ++ snoopXbaseAddress = ++ pci_snoop_control_base_0_low[host] + 0x10 * region; ++ snoopXtopAddress = pci_snoop_control_top_0[host] + 0x10 * region; ++ if (regionLength == 0) { /* closing the region */ ++ GT_REG_WRITE (snoopXbaseAddress, 0x0000ffff); ++ GT_REG_WRITE (snoopXtopAddress, 0); ++ return true; ++ } ++ baseAddress = baseAddress & 0xfff00000; /* Granularity of 1MByte */ ++ data = (baseAddress >> 20) | snoopType << 12; ++ GT_REG_WRITE (snoopXbaseAddress, data); ++ snoopHigh = (snoopHigh & 0xfff00000) >> 20; ++ GT_REG_WRITE (snoopXtopAddress, snoopHigh - 1); ++ return true; ++} ++ ++static int gt_read_config_dword (struct pci_controller *hose, ++ pci_dev_t dev, int offset, u32 * value) ++{ ++ int bus = PCI_BUS (dev); ++ ++ if ((bus == local_buses[0]) || (bus == local_buses[1])) { ++ *value = pciReadConfigReg ((PCI_HOST) hose->cfg_addr, offset, ++ PCI_DEV (dev)); ++ } else { ++ *value = pciOverBridgeReadConfigReg ((PCI_HOST) hose-> ++ cfg_addr, offset, ++ PCI_DEV (dev), bus); ++ } ++ ++ return 0; ++} ++ ++static int gt_write_config_dword (struct pci_controller *hose, ++ pci_dev_t dev, int offset, u32 value) ++{ ++ int bus = PCI_BUS (dev); ++ ++ if ((bus == local_buses[0]) || (bus == local_buses[1])) { ++ pciWriteConfigReg ((PCI_HOST) hose->cfg_addr, offset, ++ PCI_DEV (dev), value); ++ } else { ++ pciOverBridgeWriteConfigReg ((PCI_HOST) hose->cfg_addr, ++ offset, PCI_DEV (dev), bus, ++ value); ++ } ++ return 0; ++} ++ ++ ++static void gt_setup_ide (struct pci_controller *hose, ++ pci_dev_t dev, struct pci_config_table *entry) ++{ ++ static const int ide_bar[] = { 8, 4, 8, 4, 0, 0 }; ++ u32 bar_response, bar_value; ++ int bar; ++ ++ for (bar = 0; bar < 6; bar++) { ++ /*ronen different function for 3rd bank. */ ++ unsigned int offset = ++ (bar < 2) ? bar * 8 : 0x100 + (bar - 2) * 8; ++ ++ pci_hose_write_config_dword (hose, dev, PCI_BASE_ADDRESS_0 + offset, ++ 0x0); ++ pci_hose_read_config_dword (hose, dev, PCI_BASE_ADDRESS_0 + offset, ++ &bar_response); ++ ++ pciauto_region_allocate (bar_response & ++ PCI_BASE_ADDRESS_SPACE_IO ? hose-> ++ pci_io : hose->pci_mem, ide_bar[bar], ++ &bar_value); ++ ++ pci_hose_write_config_dword (hose, dev, PCI_BASE_ADDRESS_0 + bar * 4, ++ bar_value); ++ } ++} ++ ++#ifdef CONFIG_USE_CPCIDVI ++static void gt_setup_cpcidvi (struct pci_controller *hose, ++ pci_dev_t dev, struct pci_config_table *entry) ++{ ++ u32 bar_value, pci_response; ++ ++ pci_hose_read_config_dword (hose, dev, PCI_COMMAND, &pci_response); ++ pci_hose_write_config_dword (hose, dev, PCI_BASE_ADDRESS_0, 0xffffffff); ++ pci_hose_read_config_dword (hose, dev, PCI_BASE_ADDRESS_0, &pci_response); ++ pciauto_region_allocate (hose->pci_mem, 0x01000000, &bar_value); ++ pci_hose_write_config_dword (hose, dev, PCI_BASE_ADDRESS_0, (bar_value & 0xffffff00)); ++ pci_hose_write_config_dword (hose, dev, PCI_ROM_ADDRESS, 0x0); ++ pciauto_region_allocate (hose->pci_mem, 0x40000, &bar_value); ++ pci_hose_write_config_dword (hose, dev, PCI_ROM_ADDRESS, (bar_value & 0xffffff00) | 0x01); ++ gt_cpcidvi_rom.base = bar_value & 0xffffff00; ++ gt_cpcidvi_rom.init = 1; ++} ++ ++unsigned char gt_cpcidvi_in8(unsigned int offset) ++{ ++ unsigned char data; ++ ++ if (gt_cpcidvi_rom.init == 0) { ++ return(0); ++ } ++ data = in8((offset & 0x04) + 0x3f000 + gt_cpcidvi_rom.base); ++ return(data); ++} ++ ++void gt_cpcidvi_out8(unsigned int offset, unsigned char data) ++{ ++ unsigned int off; ++ ++ if (gt_cpcidvi_rom.init == 0) { ++ return; ++ } ++ off = data; ++ off = ((off << 3) & 0x7f8) + (offset & 0x4) + 0x3e000 + gt_cpcidvi_rom.base; ++ in8(off); ++ return; ++} ++#endif ++ ++/* TODO BJW: Change this for DB64360. This was pulled from the EV64260 */ ++/* and is curently not called *. */ ++#if 0 ++static void gt_fixup_irq (struct pci_controller *hose, pci_dev_t dev) ++{ ++ unsigned char pin, irq; ++ ++ pci_read_config_byte (dev, PCI_INTERRUPT_PIN, &pin); ++ ++ if (pin == 1) { /* only allow INT A */ ++ irq = pci_irq_swizzle[(PCI_HOST) hose-> ++ cfg_addr][PCI_DEV (dev)]; ++ if (irq) ++ pci_write_config_byte (dev, PCI_INTERRUPT_LINE, irq); ++ } ++} ++#endif ++ ++struct pci_config_table gt_config_table[] = { ++#ifdef CONFIG_USE_CPCIDVI ++ {PCI_VENDOR_ID_CT, PCI_DEVICE_ID_CT_69030, PCI_CLASS_DISPLAY_VGA, ++ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, gt_setup_cpcidvi}, ++#endif ++ {PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_IDE, ++ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, gt_setup_ide}, ++ {} ++}; ++ ++struct pci_controller pci0_hose = { ++/* fixup_irq: gt_fixup_irq, */ ++ config_table:gt_config_table, ++}; ++ ++struct pci_controller pci1_hose = { ++/* fixup_irq: gt_fixup_irq, */ ++ config_table:gt_config_table, ++}; ++ ++void pci_init_board (void) ++{ ++ unsigned int command; ++#ifdef CONFIG_PCI_PNP ++ unsigned int bar; ++#endif ++#ifdef DEBUG ++ gt_pci_bus_mode_display (PCI_HOST0); ++#endif ++#ifdef CONFIG_USE_CPCIDVI ++ gt_cpcidvi_rom.init = 0; ++ gt_cpcidvi_rom.base = 0; ++#endif ++ ++ pci0_hose.config_table = gt_config_table; ++ pci1_hose.config_table = gt_config_table; ++ ++#ifdef CONFIG_USE_CPCIDVI ++ gt_config_table[0].config_device = gt_setup_cpcidvi; ++#endif ++ gt_config_table[1].config_device = gt_setup_ide; ++ ++ pci0_hose.first_busno = 0; ++ pci0_hose.last_busno = 0xff; ++ local_buses[0] = pci0_hose.first_busno; ++ ++ /* PCI memory space */ ++ pci_set_region (pci0_hose.regions + 0, ++ CFG_PCI0_0_MEM_SPACE, ++ CFG_PCI0_0_MEM_SPACE, ++ CFG_PCI0_MEM_SIZE, PCI_REGION_MEM); ++ ++ /* PCI I/O space */ ++ pci_set_region (pci0_hose.regions + 1, ++ CFG_PCI0_IO_SPACE_PCI, ++ CFG_PCI0_IO_SPACE, CFG_PCI0_IO_SIZE, PCI_REGION_IO); ++ ++ pci_set_ops (&pci0_hose, ++ pci_hose_read_config_byte_via_dword, ++ pci_hose_read_config_word_via_dword, ++ gt_read_config_dword, ++ pci_hose_write_config_byte_via_dword, ++ pci_hose_write_config_word_via_dword, ++ gt_write_config_dword); ++ pci0_hose.region_count = 2; ++ ++ pci0_hose.cfg_addr = (unsigned int *) PCI_HOST0; ++ ++ pci_register_hose (&pci0_hose); ++ pciArbiterDisable(PCI_HOST0); /* on PMC modules no arbiter is used */ ++ pciParkingDisable (PCI_HOST0, 1, 1, 1, 1, 1, 1, 1); ++ command = pciReadConfigReg (PCI_HOST0, PCI_COMMAND, SELF); ++ command |= PCI_COMMAND_MASTER; ++ pciWriteConfigReg (PCI_HOST0, PCI_COMMAND, SELF, command); ++ command = pciReadConfigReg (PCI_HOST0, PCI_COMMAND, SELF); ++ command |= PCI_COMMAND_MEMORY; ++ pciWriteConfigReg (PCI_HOST0, PCI_COMMAND, SELF, command); ++ ++#ifdef CONFIG_PCI_PNP ++ pciauto_config_init(&pci0_hose); ++ pciauto_region_allocate(pci0_hose.pci_io, 0x400, &bar); ++#endif ++#ifdef CONFIG_PCI_SCAN_SHOW ++ printf("PCI: Bus Dev VenId DevId Class Int\n"); ++#endif ++ pci0_hose.last_busno = pci_hose_scan_bus (&pci0_hose, pci0_hose.first_busno); ++ ++#ifdef DEBUG ++ gt_pci_bus_mode_display (PCI_HOST1); ++#endif ++ pci1_hose.first_busno = pci0_hose.last_busno + 1; ++ pci1_hose.last_busno = 0xff; ++ pci1_hose.current_busno = pci1_hose.first_busno; ++ local_buses[1] = pci1_hose.first_busno; ++ ++ /* PCI memory space */ ++ pci_set_region (pci1_hose.regions + 0, ++ CFG_PCI1_0_MEM_SPACE, ++ CFG_PCI1_0_MEM_SPACE, ++ CFG_PCI1_MEM_SIZE, PCI_REGION_MEM); ++ ++ /* PCI I/O space */ ++ pci_set_region (pci1_hose.regions + 1, ++ CFG_PCI1_IO_SPACE_PCI, ++ CFG_PCI1_IO_SPACE, CFG_PCI1_IO_SIZE, PCI_REGION_IO); ++ ++ pci_set_ops (&pci1_hose, ++ pci_hose_read_config_byte_via_dword, ++ pci_hose_read_config_word_via_dword, ++ gt_read_config_dword, ++ pci_hose_write_config_byte_via_dword, ++ pci_hose_write_config_word_via_dword, ++ gt_write_config_dword); ++ ++ pci1_hose.region_count = 2; ++ ++ pci1_hose.cfg_addr = (unsigned int *) PCI_HOST1; ++ ++ pci_register_hose (&pci1_hose); ++ ++ pciArbiterEnable (PCI_HOST1); ++ pciParkingDisable (PCI_HOST1, 1, 1, 1, 1, 1, 1, 1); ++ ++ command = pciReadConfigReg (PCI_HOST1, PCI_COMMAND, SELF); ++ command |= PCI_COMMAND_MASTER; ++ pciWriteConfigReg (PCI_HOST1, PCI_COMMAND, SELF, command); ++ ++#ifdef CONFIG_PCI_PNP ++ pciauto_config_init(&pci1_hose); ++ pciauto_region_allocate(pci1_hose.pci_io, 0x400, &bar); ++#endif ++ pci1_hose.last_busno = pci_hose_scan_bus (&pci1_hose, pci1_hose.first_busno); ++ ++ command = pciReadConfigReg (PCI_HOST1, PCI_COMMAND, SELF); ++ command |= PCI_COMMAND_MEMORY; ++ pciWriteConfigReg (PCI_HOST1, PCI_COMMAND, SELF, command); ++ ++} ++#endif /* of CONFIG_PCI */ +diff -Naupr u-boot-1.1.6/board/prodrive/p3mx/ppc_error_no.h u-boot-1.1.6-fsl-1/board/prodrive/p3mx/ppc_error_no.h +--- u-boot-1.1.6/board/prodrive/p3mx/ppc_error_no.h 1969-12-31 18:00:00.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/board/prodrive/p3mx/ppc_error_no.h 2006-12-06 10:33:49.000000000 -0600 +@@ -0,0 +1,164 @@ ++/* ++ * (C) Copyright 2003 ++ * Ingo Assmus <ingo.assmus@keymile.com> ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++/* ++ * BK Id: SCCS/s.errno.h 1.9 06/05/01 21:45:21 paulus ++ */ ++#ifndef _MV_PPC_ERRNO_H ++#define _MV_PPC_ERRNO_H ++ ++#define EPERM 1 /* Operation not permitted */ ++#define ENOENT 2 /* No such file or directory */ ++#define ESRCH 3 /* No such process */ ++#define EINTR 4 /* Interrupted system call */ ++#define EIO 5 /* I/O error */ ++#define ENXIO 6 /* No such device or address */ ++#define E2BIG 7 /* Arg list too long */ ++#define ENOEXEC 8 /* Exec format error */ ++#define EBADF 9 /* Bad file number */ ++#define ECHILD 10 /* No child processes */ ++#define EAGAIN 11 /* Try again */ ++#define ENOMEM 12 /* Out of memory */ ++#define EACCES 13 /* Permission denied */ ++#define EFAULT 14 /* Bad address */ ++#define ENOTBLK 15 /* Block device required */ ++#define EBUSY 16 /* Device or resource busy */ ++#define EEXIST 17 /* File exists */ ++#define EXDEV 18 /* Cross-device link */ ++#define ENODEV 19 /* No such device */ ++#define ENOTDIR 20 /* Not a directory */ ++#define EISDIR 21 /* Is a directory */ ++#define EINVAL 22 /* Invalid argument */ ++#define ENFILE 23 /* File table overflow */ ++#define EMFILE 24 /* Too many open files */ ++#define ENOTTY 25 /* Not a typewriter */ ++#define ETXTBSY 26 /* Text file busy */ ++#define EFBIG 27 /* File too large */ ++#define ENOSPC 28 /* No space left on device */ ++#define ESPIPE 29 /* Illegal seek */ ++#define EROFS 30 /* Read-only file system */ ++#define EMLINK 31 /* Too many links */ ++#define EPIPE 32 /* Broken pipe */ ++#define EDOM 33 /* Math argument out of domain of func */ ++#define ERANGE 34 /* Math result not representable */ ++#define EDEADLK 35 /* Resource deadlock would occur */ ++#define ENAMETOOLONG 36 /* File name too long */ ++#define ENOLCK 37 /* No record locks available */ ++#define ENOSYS 38 /* Function not implemented */ ++#define ENOTEMPTY 39 /* Directory not empty */ ++#define ELOOP 40 /* Too many symbolic links encountered */ ++#define EWOULDBLOCK EAGAIN /* Operation would block */ ++#define ENOMSG 42 /* No message of desired type */ ++#define EIDRM 43 /* Identifier removed */ ++#define ECHRNG 44 /* Channel number out of range */ ++#define EL2NSYNC 45 /* Level 2 not synchronized */ ++#define EL3HLT 46 /* Level 3 halted */ ++#define EL3RST 47 /* Level 3 reset */ ++#define ELNRNG 48 /* Link number out of range */ ++#define EUNATCH 49 /* Protocol driver not attached */ ++#define ENOCSI 50 /* No CSI structure available */ ++#define EL2HLT 51 /* Level 2 halted */ ++#define EBADE 52 /* Invalid exchange */ ++#define EBADR 53 /* Invalid request descriptor */ ++#define EXFULL 54 /* Exchange full */ ++#define ENOANO 55 /* No anode */ ++#define EBADRQC 56 /* Invalid request code */ ++#define EBADSLT 57 /* Invalid slot */ ++#define EDEADLOCK 58 /* File locking deadlock error */ ++#define EBFONT 59 /* Bad font file format */ ++#define ENOSTR 60 /* Device not a stream */ ++#define ENODATA 61 /* No data available */ ++#define ETIME 62 /* Timer expired */ ++#define ENOSR 63 /* Out of streams resources */ ++#define ENONET 64 /* Machine is not on the network */ ++#define ENOPKG 65 /* Package not installed */ ++#define EREMOTE 66 /* Object is remote */ ++#define ENOLINK 67 /* Link has been severed */ ++#define EADV 68 /* Advertise error */ ++#define ESRMNT 69 /* Srmount error */ ++#define ECOMM 70 /* Communication error on send */ ++#define EPROTO 71 /* Protocol error */ ++#define EMULTIHOP 72 /* Multihop attempted */ ++#define EDOTDOT 73 /* RFS specific error */ ++#define EBADMSG 74 /* Not a data message */ ++#define EOVERFLOW 75 /* Value too large for defined data type */ ++#define ENOTUNIQ 76 /* Name not unique on network */ ++#define EBADFD 77 /* File descriptor in bad state */ ++#define EREMCHG 78 /* Remote address changed */ ++#define ELIBACC 79 /* Can not access a needed shared library */ ++#define ELIBBAD 80 /* Accessing a corrupted shared library */ ++#define ELIBSCN 81 /* .lib section in a.out corrupted */ ++#define ELIBMAX 82 /* Attempting to link in too many shared libraries */ ++#define ELIBEXEC 83 /* Cannot exec a shared library directly */ ++#define EILSEQ 84 /* Illegal byte sequence */ ++#define ERESTART 85 /* Interrupted system call should be restarted */ ++#define ESTRPIPE 86 /* Streams pipe error */ ++#define EUSERS 87 /* Too many users */ ++#define ENOTSOCK 88 /* Socket operation on non-socket */ ++#define EDESTADDRREQ 89 /* Destination address required */ ++#define EMSGSIZE 90 /* Message too long */ ++#define EPROTOTYPE 91 /* Protocol wrong type for socket */ ++#define ENOPROTOOPT 92 /* Protocol not available */ ++#define EPROTONOSUPPORT 93 /* Protocol not supported */ ++#define ESOCKTNOSUPPORT 94 /* Socket type not supported */ ++#define EOPNOTSUPP 95 /* Operation not supported on transport endpoint */ ++#define EPFNOSUPPORT 96 /* Protocol family not supported */ ++#define EAFNOSUPPORT 97 /* Address family not supported by protocol */ ++#define EADDRINUSE 98 /* Address already in use */ ++#define EADDRNOTAVAIL 99 /* Cannot assign requested address */ ++#define ENETDOWN 100 /* Network is down */ ++#define ENETUNREACH 101 /* Network is unreachable */ ++#define ENETRESET 102 /* Network dropped connection because of reset */ ++#define ECONNABORTED 103 /* Software caused connection abort */ ++#define ECONNRESET 104 /* Connection reset by peer */ ++#define ENOBUFS 105 /* No buffer space available */ ++#define EISCONN 106 /* Transport endpoint is already connected */ ++#define ENOTCONN 107 /* Transport endpoint is not connected */ ++#define ESHUTDOWN 108 /* Cannot send after transport endpoint shutdown */ ++#define ETOOMANYREFS 109 /* Too many references: cannot splice */ ++#define ETIMEDOUT 110 /* Connection timed out */ ++#define ECONNREFUSED 111 /* Connection refused */ ++#define EHOSTDOWN 112 /* Host is down */ ++#define EHOSTUNREACH 113 /* No route to host */ ++#define EALREADY 114 /* Operation already in progress */ ++#define EINPROGRESS 115 /* Operation now in progress */ ++#define ESTALE 116 /* Stale NFS file handle */ ++#define EUCLEAN 117 /* Structure needs cleaning */ ++#define ENOTNAM 118 /* Not a XENIX named type file */ ++#define ENAVAIL 119 /* No XENIX semaphores available */ ++#define EISNAM 120 /* Is a named type file */ ++#define EREMOTEIO 121 /* Remote I/O error */ ++#define EDQUOT 122 /* Quota exceeded */ ++ ++#define ENOMEDIUM 123 /* No medium found */ ++#define EMEDIUMTYPE 124 /* Wrong medium type */ ++ ++/* Should never be seen by user programs */ ++#define ERESTARTSYS 512 ++#define ERESTARTNOINTR 513 ++#define ERESTARTNOHAND 514 /* restart if no handler.. */ ++#define ENOIOCTLCMD 515 /* No ioctl command */ ++ ++#define _LAST_ERRNO 515 ++ ++#endif +diff -Naupr u-boot-1.1.6/board/prodrive/p3mx/sdram_init.c u-boot-1.1.6-fsl-1/board/prodrive/p3mx/sdram_init.c +--- u-boot-1.1.6/board/prodrive/p3mx/sdram_init.c 1969-12-31 18:00:00.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/board/prodrive/p3mx/sdram_init.c 2006-12-06 10:33:49.000000000 -0600 +@@ -0,0 +1,434 @@ ++/* ++ * (C) Copyright 2001 ++ * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc. ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++/************************************************************************* ++ * adaption for the Marvell DB64460 Board ++ * Ingo Assmus (ingo.assmus@keymile.com) ++ *************************************************************************/ ++ ++/* sdram_init.c - automatic memory sizing */ ++ ++#include <common.h> ++#include <74xx_7xx.h> ++#include "../../Marvell/include/memory.h" ++#include "../../Marvell/include/pci.h" ++#include "../../Marvell/include/mv_gen_reg.h" ++#include <net.h> ++ ++#include "eth.h" ++#include "mpsc.h" ++#include "../../Marvell/common/i2c.h" ++#include "64460.h" ++#include "mv_regs.h" ++ ++DECLARE_GLOBAL_DATA_PTR; ++ ++#undef DEBUG ++#define MAP_PCI ++ ++#ifdef DEBUG ++#define DP(x) x ++#else ++#define DP(x) ++#endif ++ ++int set_dfcdlInit (void); /* setup delay line of Mv64460 */ ++int mvDmaIsChannelActive (int); ++int mvDmaSetMemorySpace (ulong, ulong, ulong, ulong, ulong); ++int mvDmaTransfer (int, ulong, ulong, ulong, ulong); ++ ++#define D_CACHE_FLUSH_LINE(addr, offset) \ ++ { \ ++ __asm__ __volatile__ ("dcbf %0,%1" : : "r" (addr), "r" (offset)); \ ++ } ++ ++int memory_map_bank (unsigned int bankNo, ++ unsigned int bankBase, unsigned int bankLength) ++{ ++#ifdef MAP_PCI ++ PCI_HOST host; ++#endif ++ ++#ifdef DEBUG ++ if (bankLength > 0) { ++ printf ("mapping bank %d at %08x - %08x\n", ++ bankNo, bankBase, bankBase + bankLength - 1); ++ } else { ++ printf ("unmapping bank %d\n", bankNo); ++ } ++#endif ++ ++ memoryMapBank (bankNo, bankBase, bankLength); ++ ++#ifdef MAP_PCI ++ for (host = PCI_HOST0; host <= PCI_HOST1; host++) { ++ const int features = ++ PREFETCH_ENABLE | ++ DELAYED_READ_ENABLE | ++ AGGRESSIVE_PREFETCH | ++ READ_LINE_AGGRESSIVE_PREFETCH | ++ READ_MULTI_AGGRESSIVE_PREFETCH | ++ MAX_BURST_4 | PCI_NO_SWAP; ++ ++ pciMapMemoryBank (host, bankNo, bankBase, bankLength); ++ ++ pciSetRegionSnoopMode (host, bankNo, PCI_SNOOP_WB, bankBase, ++ bankLength); ++ ++ pciSetRegionFeatures (host, bankNo, features, bankBase, ++ bankLength); ++ } ++#endif ++ ++ return 0; ++} ++ ++/* ++ * Check memory range for valid RAM. A simple memory test determines ++ * the actually available RAM size between addresses `base' and ++ * `base + maxsize'. Some (not all) hardware errors are detected: ++ * - short between address lines ++ * - short between data lines ++ */ ++long int dram_size (long int *base, long int maxsize) ++{ ++ volatile long int *addr, *b = base; ++ long int cnt, val, save1, save2; ++ ++#define STARTVAL (1<<20) /* start test at 1M */ ++ for (cnt = STARTVAL / sizeof (long); cnt < maxsize / sizeof (long); ++ cnt <<= 1) { ++ addr = base + cnt; /* pointer arith! */ ++ ++ save1 = *addr; /* save contents of addr */ ++ save2 = *b; /* save contents of base */ ++ ++ *addr = cnt; /* write cnt to addr */ ++ *b = 0; /* put null at base */ ++ ++ /* check at base address */ ++ if ((*b) != 0) { ++ *addr = save1; /* restore *addr */ ++ *b = save2; /* restore *b */ ++ return (0); ++ } ++ val = *addr; /* read *addr */ ++ val = *addr; /* read *addr */ ++ ++ *addr = save1; ++ *b = save2; ++ ++ if (val != cnt) { ++ DP (printf ++ ("Found %08x at Address %08x (failure)\n", ++ (unsigned int) val, (unsigned int) addr)); ++ /* fix boundary condition.. STARTVAL means zero */ ++ if (cnt == STARTVAL / sizeof (long)) ++ cnt = 0; ++ return (cnt * sizeof (long)); ++ } ++ } ++ ++ return maxsize; ++} ++ ++#define SDRAM_NORMAL 0x0 ++#define SDRAM_PRECHARGE_ALL 0x1 ++#define SDRAM_REFRESH_ALL 0x2 ++#define SDRAM_MODE_REG_SETUP 0x3 ++#define SDRAM_XTEN_MODE_REG_SETUP 0x4 ++#define SDRAM_NOP 0x5 ++#define SDRAM_SELF_REFRESH 0x7 ++ ++long int initdram (int board_type) ++{ ++ int tmp; ++ int start; ++ ulong size; ++ ulong memSpaceAttr; ++ ulong dest; ++ ++ /* first disable all banks */ ++ memory_map_bank(0, 0, 0); ++ memory_map_bank(1, 0, 0); ++ memory_map_bank(2, 0, 0); ++ memory_map_bank(3, 0, 0); ++ ++ /* calibrate delay lines */ ++ set_dfcdlInit(); ++ ++ GT_REG_WRITE(MV64460_SDRAM_OPERATION, SDRAM_NOP); /* 0x1418 */ ++ do { ++ tmp = GTREGREAD(MV64460_SDRAM_OPERATION); ++ } while(tmp != 0x0); ++ ++ /* SDRAM controller configuration */ ++#ifdef CONFIG_MV64460_ECC ++ GT_REG_WRITE(MV64460_SDRAM_CONFIG, 0x58201400); /* 0x1400 */ ++#else ++ GT_REG_WRITE(MV64460_SDRAM_CONFIG, 0x58200400); /* 0x1400 */ ++#endif ++ GT_REG_WRITE(MV64460_D_UNIT_CONTROL_LOW, 0xC3000540); /* 0x1404 */ ++ GT_REG_WRITE(MV64460_D_UNIT_CONTROL_HIGH, 0x0300F777); /* 0x1424 */ ++ GT_REG_WRITE(MV64460_SDRAM_TIMING_CONTROL_LOW, 0x01712220); /* 0x1408 */ ++ GT_REG_WRITE(MV64460_SDRAM_TIMING_CONTROL_HIGH, 0x0000005D); /* 0x140C */ ++ GT_REG_WRITE(MV64460_SDRAM_ADDR_CONTROL, 0x00000012); /* 0x1410 */ ++ GT_REG_WRITE(MV64460_SDRAM_OPEN_PAGES_CONTROL, 0x00000001); /* 0x1414 */ ++ ++ /* SDRAM drive strength */ ++ GT_REG_WRITE(MV64460_SDRAM_ADDR_CTRL_PADS_CALIBRATION, 0x80000000); /* 0x14C0 */ ++ GT_REG_WRITE(MV64460_SDRAM_ADDR_CTRL_PADS_CALIBRATION, 0x80000008); /* 0x14C0 */ ++ GT_REG_WRITE(MV64460_SDRAM_DATA_PADS_CALIBRATION, 0x80000000); /* 0x14C4 */ ++ GT_REG_WRITE(MV64460_SDRAM_DATA_PADS_CALIBRATION, 0x80000008); /* 0x14C4 */ ++ ++ /* setup SDRAM device registers */ ++ ++ /* precharge all */ ++ GT_REG_WRITE(MV64460_SDRAM_OPERATION, SDRAM_PRECHARGE_ALL); /* 0x1418 */ ++ do { ++ tmp = GTREGREAD(MV64460_SDRAM_OPERATION); ++ } while(tmp != 0x0); ++ ++ /* enable DLL */ ++ GT_REG_WRITE(MV64460_EXTENDED_DRAM_MODE, 0x00000000); /* 0x1420 */ ++ GT_REG_WRITE(MV64460_SDRAM_OPERATION, SDRAM_XTEN_MODE_REG_SETUP); /* 0x1418 */ ++ do { ++ tmp = GTREGREAD(MV64460_SDRAM_OPERATION); ++ } while(tmp != 0x0); ++ ++ /* reset DLL */ ++ GT_REG_WRITE(MV64460_SDRAM_MODE, 0x00000132); /* 0x141C */ ++ GT_REG_WRITE(MV64460_SDRAM_OPERATION, SDRAM_MODE_REG_SETUP); /* 0x1418 */ ++ do { ++ tmp = GTREGREAD(MV64460_SDRAM_OPERATION); ++ } while(tmp != 0x0); ++ ++ /* precharge all */ ++ GT_REG_WRITE(MV64460_SDRAM_OPERATION, SDRAM_PRECHARGE_ALL); /* 0x1418 */ ++ do { ++ tmp = GTREGREAD(MV64460_SDRAM_OPERATION); ++ } while(tmp != 0x0); ++ ++ /* wait for 2 auto refresh commands */ ++ udelay(20); ++ ++ /* un-reset DLL */ ++ GT_REG_WRITE(MV64460_SDRAM_MODE, 0x00000032); /* 0x141C */ ++ GT_REG_WRITE(MV64460_SDRAM_OPERATION, SDRAM_MODE_REG_SETUP); /* 0x1418 */ ++ do { ++ tmp = GTREGREAD(MV64460_SDRAM_OPERATION); ++ } while(tmp != 0x0); ++ ++ /* wait 200 cycles */ ++ udelay(2); /* FIXME make this dynamic for the system clock */ ++ ++ /* SDRAM init done */ ++ memory_map_bank(0, CFG_SDRAM_BASE, (256 << 20)); ++#ifdef CFG_SDRAM1_BASE ++ memory_map_bank(1, CFG_SDRAM1_BASE, (256 << 20)); ++#endif ++ ++ /* DUNIT_MMASK: enable SnoopHitEn bit to avoid errata CPU-#4 ++ */ ++ tmp = GTREGREAD(MV64460_D_UNIT_MMASK); /* 0x14B0 */ ++ GT_REG_WRITE(MV64460_D_UNIT_MMASK, tmp | 0x2); ++ ++ start = (0 << 20); ++#ifdef CONFIG_P3M750 ++ size = (512 << 20); ++#elif defined (CONFIG_P3M7448) ++ size = (128 << 20); ++#endif ++ ++#ifdef CONFIG_MV64460_ECC ++ memSpaceAttr = ((~(BIT0 << 0)) & 0xf) << 8; ++ mvDmaSetMemorySpace (0, 0, memSpaceAttr, start, size); ++ for (dest = start; dest < start + size; dest += _8M) { ++ mvDmaTransfer (0, start, dest, _8M, ++ BIT8 /*DMA_DTL_128BYTES */ | ++ BIT3 /*DMA_HOLD_SOURCE_ADDR */ | ++ BIT11 /*DMA_BLOCK_TRANSFER_MODE */ ); ++ while (mvDmaIsChannelActive (0)); ++ } ++#endif ++ ++ return (size); ++} ++ ++void board_add_ram_info(int use_default) ++{ ++ u32 val; ++ ++ puts(" (CL="); ++ switch ((GTREGREAD(MV64460_SDRAM_MODE) >> 4) & 0x7) { ++ case 0x2: ++ puts("2"); ++ break; ++ case 0x3: ++ puts("3"); ++ break; ++ case 0x5: ++ puts("1.5"); ++ break; ++ case 0x6: ++ puts("2.5"); ++ break; ++ } ++ ++ val = GTREGREAD(MV64460_SDRAM_CONFIG); ++ ++ puts(", ECC "); ++ if (val & 0x00001000) ++ puts("enabled)"); ++ else ++ puts("not enabled)"); ++} ++ ++/* ++ * mvDmaIsChannelActive - Check if IDMA channel is active ++ * ++ * channel = IDMA channel number from 0 to 7 ++ */ ++int mvDmaIsChannelActive (int channel) ++{ ++ ulong data; ++ ++ data = GTREGREAD (MV64460_DMA_CHANNEL0_CONTROL + 4 * channel); ++ if (data & BIT14) /* activity status */ ++ return 1; ++ ++ return 0; ++} ++ ++/* ++ * mvDmaSetMemorySpace - Set a DMA memory window for the DMA's address decoding ++ * map. ++ * ++ * memSpace = IDMA memory window number from 0 to 7 ++ * trg_if = Target interface: ++ * 0x0 DRAM ++ * 0x1 Device Bus ++ * 0x2 Integrated SDRAM (or CPU bus 60x only) ++ * 0x3 PCI0 ++ * 0x4 PCI1 ++ * attr = IDMA attributes (see MV datasheet) ++ * base_addr = Sets up memory window for transfers ++ * ++ */ ++int mvDmaSetMemorySpace (ulong memSpace, ++ ulong trg_if, ++ ulong attr, ulong base_addr, ulong size) ++{ ++ ulong temp; ++ ++ /* The base address must be aligned to the size. */ ++ if (base_addr % size != 0) ++ return 0; ++ ++ if (size >= 0x10000) { /* 64K */ ++ size &= 0xffff0000; ++ base_addr = (base_addr & 0xffff0000); ++ /* Set the new attributes */ ++ GT_REG_WRITE (MV64460_DMA_BASE_ADDR_REG0 + memSpace * 8, ++ (base_addr | trg_if | attr)); ++ GT_REG_WRITE ((MV64460_DMA_SIZE_REG0 + memSpace * 8), ++ (size - 1) & 0xffff0000); ++ temp = GTREGREAD (MV64460_DMA_BASE_ADDR_ENABLE_REG); ++ GT_REG_WRITE (DMA_BASE_ADDR_ENABLE_REG, ++ (temp & ~(BIT0 << memSpace))); ++ return 1; ++ } ++ ++ return 0; ++} ++ ++/* ++ * mvDmaTransfer - Transfer data from src_addr to dst_addr on one of the 4 ++ * DMA channels. ++ * ++ * channel = IDMA channel number from 0 to 3 ++ * destAddr = Destination address ++ * sourceAddr = Source address ++ * size = Size in bytes ++ * command = See MV datasheet ++ * ++ */ ++int mvDmaTransfer (int channel, ulong sourceAddr, ++ ulong destAddr, ulong size, ulong command) ++{ ++ ulong engOffReg = 0; /* Engine Offset Register */ ++ ++ if (size > 0xffff) ++ command = command | BIT31; /* DMA_16M_DESCRIPTOR_MODE */ ++ command = command | ((command >> 6) & 0x7); ++ engOffReg = channel * 4; ++ GT_REG_WRITE (MV64460_DMA_CHANNEL0_BYTE_COUNT + engOffReg, size); ++ GT_REG_WRITE (MV64460_DMA_CHANNEL0_SOURCE_ADDR + engOffReg, sourceAddr); ++ GT_REG_WRITE (MV64460_DMA_CHANNEL0_DESTINATION_ADDR + engOffReg, destAddr); ++ command = command | ++ BIT12 | /* DMA_CHANNEL_ENABLE */ ++ BIT9; /* DMA_NON_CHAIN_MODE */ ++ /* Activate DMA channel By writting to mvDmaControlRegister */ ++ GT_REG_WRITE (MV64460_DMA_CHANNEL0_CONTROL + engOffReg, command); ++ return 1; ++} ++ ++/**************************************************************************************** ++ * SDRAM INIT * ++ * This procedure detect all Sdram types: 64, 128, 256, 512 Mbit, 1Gbit and 2Gb * ++ * This procedure fits only the Atlantis * ++ * * ++ ***************************************************************************************/ ++ ++/**************************************************************************************** ++ * DFCDL initialize MV643xx Design Considerations * ++ * * ++ ***************************************************************************************/ ++int set_dfcdlInit (void) ++{ ++ int i; ++ ++ /* Values from MV64460 User Manual */ ++ unsigned int dfcdl_tbl[] = { 0x00000000, 0x00000001, 0x00000042, 0x00000083, ++ 0x000000c4, 0x00000105, 0x00000146, 0x00000187, ++ 0x000001c8, 0x00000209, 0x0000024a, 0x0000028b, ++ 0x000002cc, 0x0000030d, 0x0000034e, 0x0000038f, ++ 0x000003d0, 0x00000411, 0x00000452, 0x00000493, ++ 0x000004d4, 0x00000515, 0x00000556, 0x00000597, ++ 0x000005d8, 0x00000619, 0x0000065a, 0x0000069b, ++ 0x000006dc, 0x0000071d, 0x0000075e, 0x0000079f, ++ 0x000007e0, 0x00000821, 0x00000862, 0x000008a3, ++ 0x000008e4, 0x00000925, 0x00000966, 0x000009a7, ++ 0x000009e8, 0x00000a29, 0x00000a6a, 0x00000aab, ++ 0x00000aec, 0x00000b2d, 0x00000b6e, 0x00000baf, ++ 0x00000bf0, 0x00000c31, 0x00000c72, 0x00000cb3, ++ 0x00000cf4, 0x00000d35, 0x00000d76, 0x00000db7, ++ 0x00000df8, 0x00000e39, 0x00000e7a, 0x00000ebb, ++ 0x00000efc, 0x00000f3d, 0x00000f7e, 0x00000fbf }; ++ ++ for (i = 0; i < 64; i++) ++ GT_REG_WRITE (SRAM_DATA0, dfcdl_tbl[i]); ++ GT_REG_WRITE (DFCDL_CONFIG0, 0x00300000); /* enable dynamic delay line updating */ ++ ++ return (0); ++} +diff -Naupr u-boot-1.1.6/board/prodrive/p3mx/serial.c u-boot-1.1.6-fsl-1/board/prodrive/p3mx/serial.c +--- u-boot-1.1.6/board/prodrive/p3mx/serial.c 1969-12-31 18:00:00.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/board/prodrive/p3mx/serial.c 2006-12-06 10:33:49.000000000 -0600 +@@ -0,0 +1,107 @@ ++/* ++ * (C) Copyright 2001 ++ * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc. ++ * ++ * modified for marvell db64360 eval board by ++ * Ingo Assmus <ingo.assmus@keymile.com> ++ * ++ * modified for cpci750 board by ++ * Reinhard Arlt <reinhard.arlt@esd-electronics.com> ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++/* ++ * serial.c - serial support for esd cpci750 board ++ */ ++ ++/* supports the MPSC */ ++ ++#include <common.h> ++#include <command.h> ++#include "../../Marvell/include/memory.h" ++#include "serial.h" ++ ++#include "mpsc.h" ++ ++DECLARE_GLOBAL_DATA_PTR; ++ ++int serial_init (void) ++{ ++ mpsc_init (gd->baudrate); ++ ++ return (0); ++} ++ ++void serial_putc (const char c) ++{ ++ if (c == '\n') ++ mpsc_putchar ('\r'); ++ ++ mpsc_putchar (c); ++} ++ ++int serial_getc (void) ++{ ++ return mpsc_getchar (); ++} ++ ++int serial_tstc (void) ++{ ++ return mpsc_test_char (); ++} ++ ++void serial_setbrg (void) ++{ ++ galbrg_set_baudrate (CONFIG_MPSC_PORT, gd->baudrate); ++} ++ ++ ++void serial_puts (const char *s) ++{ ++ while (*s) { ++ serial_putc (*s++); ++ } ++} ++ ++#if (CONFIG_COMMANDS & CFG_CMD_KGDB) ++void kgdb_serial_init (void) ++{ ++} ++ ++void putDebugChar (int c) ++{ ++ serial_putc (c); ++} ++ ++void putDebugStr (const char *str) ++{ ++ serial_puts (str); ++} ++ ++int getDebugChar (void) ++{ ++ return serial_getc (); ++} ++ ++void kgdb_interruptible (int yes) ++{ ++ return; ++} ++#endif /* CFG_CMD_KGDB */ +diff -Naupr u-boot-1.1.6/board/prodrive/p3mx/serial.h u-boot-1.1.6-fsl-1/board/prodrive/p3mx/serial.h +--- u-boot-1.1.6/board/prodrive/p3mx/serial.h 1969-12-31 18:00:00.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/board/prodrive/p3mx/serial.h 2006-12-06 10:33:49.000000000 -0600 +@@ -0,0 +1,89 @@ ++/* ++ * (C) Copyright 2001 ++ * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc. ++ * ++ * modified for marvell db64360 eval board by ++ * Ingo Assmus <ingo.assmus@keymile.com> ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++/* serial.h - mostly useful for DUART serial_init in serial.c */ ++ ++#ifndef __SERIAL_H__ ++#define __SERIAL_H__ ++ ++#if 0 ++ ++#define B230400 1 ++#define B115200 2 ++#define B57600 4 ++#define B38400 82 ++#define B19200 163 ++#define B9600 24 ++#define B4800 651 ++#define B2400 1302 ++#define B1200 2604 ++#define B600 5208 ++#define B300 10417 ++#define B150 20833 ++#define B110 28409 ++#define BDEFAULT B115200 ++ ++ /* this stuff is important to initialize ++ the DUART channels */ ++ ++#define Scale 0x01L /* distance between port addresses */ ++#define COM1 0x000003f8 /* Keyboard */ ++#define COM2 0x000002f8 /* Host */ ++ ++ ++/* Port Definitions relative to base COM port addresses */ ++#define DataIn (0x00*Scale) /* data input port */ ++#define DataOut (0x00*Scale) /* data output port */ ++#define BaudLsb (0x00*Scale) /* baud rate divisor least significant byte */ ++#define BaudMsb (0x01*Scale) /* baud rate divisor most significant byte */ ++#define Ier (0x01*Scale) /* interrupt enable register */ ++#define Iir (0x02*Scale) /* interrupt identification register */ ++#define Lcr (0x03*Scale) /* line control register */ ++#define Mcr (0x04*Scale) /* modem control register */ ++#define Lsr (0x05*Scale) /* line status register */ ++#define Msr (0x06*Scale) /* modem status register */ ++ ++/* Bit Definitions for above ports */ ++#define LcrDlab 0x80 /* b7: enable baud rate divisor registers */ ++#define LcrDflt 0x03 /* b6-0: no parity, 1 stop, 8 data */ ++ ++#define McrRts 0x02 /* b1: request to send (I am ready to xmit) */ ++#define McrDtr 0x01 /* b0: data terminal ready (I am alive ready to rcv) */ ++#define McrDflt (McrRts|McrDtr) ++ ++#define LsrTxD 0x6000 /* b5: transmit holding register empty (i.e. xmit OK!)*/ ++ /* b6: transmitter empty */ ++#define LsrRxD 0x0100 /* b0: received data ready (i.e. got a byte!) */ ++ ++#define MsrRi 0x0040 /* b6: ring indicator (other guy is ready to rcv) */ ++#define MsrDsr 0x0020 /* b5: data set ready (other guy is alive ready to rcv */ ++#define MsrCts 0x0010 /* b4: clear to send (other guy is ready to rcv) */ ++ ++#define IerRda 0xf /* b0: Enable received data available interrupt */ ++ ++#endif ++ ++#endif /* __SERIAL_H__ */ +diff -Naupr u-boot-1.1.6/board/prodrive/p3mx/u-boot.lds u-boot-1.1.6-fsl-1/board/prodrive/p3mx/u-boot.lds +--- u-boot-1.1.6/board/prodrive/p3mx/u-boot.lds 1969-12-31 18:00:00.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/board/prodrive/p3mx/u-boot.lds 2006-12-06 10:33:49.000000000 -0600 +@@ -0,0 +1,138 @@ ++/* ++ * (C) Copyright 2001 ++ * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc. ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++/* ++ * u-boot.lds - linker script for U-Boot on the Galileo Eval Board. ++ */ ++ ++OUTPUT_ARCH(powerpc) ++SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib); ++/* Do we need any of these for elf? ++ __DYNAMIC = 0; */ ++SECTIONS ++{ ++ /* Read-only sections, merged into text segment: */ ++ . = + SIZEOF_HEADERS; ++ .interp : { *(.interp) } ++ .hash : { *(.hash) } ++ .dynsym : { *(.dynsym) } ++ .dynstr : { *(.dynstr) } ++ .rel.text : { *(.rel.text) } ++ .rela.text : { *(.rela.text) } ++ .rel.data : { *(.rel.data) } ++ .rela.data : { *(.rela.data) } ++ .rel.rodata : { *(.rel.rodata) } ++ .rela.rodata : { *(.rela.rodata) } ++ .rel.got : { *(.rel.got) } ++ .rela.got : { *(.rela.got) } ++ .rel.ctors : { *(.rel.ctors) } ++ .rela.ctors : { *(.rela.ctors) } ++ .rel.dtors : { *(.rel.dtors) } ++ .rela.dtors : { *(.rela.dtors) } ++ .rel.bss : { *(.rel.bss) } ++ .rela.bss : { *(.rela.bss) } ++ .rel.plt : { *(.rel.plt) } ++ .rela.plt : { *(.rela.plt) } ++ .init : { *(.init) } ++ .plt : { *(.plt) } ++ .text : ++ { ++ cpu/74xx_7xx/start.o (.text) ++ ++/* store the environment in a seperate sector in the boot flash */ ++/* . = env_offset; */ ++/* common/environment.o(.text) */ ++ ++ *(.text) ++ *(.fixup) ++ *(.got1) ++ } ++ _etext = .; ++ PROVIDE (etext = .); ++ .rodata : ++ { ++ *(.rodata) ++ *(.rodata1) ++ *(.rodata.str1.4) ++ *(.eh_frame) ++ } ++ .fini : { *(.fini) } =0 ++ .ctors : { *(.ctors) } ++ .dtors : { *(.dtors) } ++ ++ /* Read-write section, merged into data segment: */ ++ . = (. + 0x00FF) & 0xFFFFFF00; ++ _erotext = .; ++ PROVIDE (erotext = .); ++ .reloc : ++ { ++ *(.got) ++ _GOT2_TABLE_ = .; ++ *(.got2) ++ _FIXUP_TABLE_ = .; ++ *(.fixup) ++ } ++ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; ++ __fixup_entries = (. - _FIXUP_TABLE_)>>2; ++ ++ .data : ++ { ++ *(.data) ++ *(.data1) ++ *(.sdata) ++ *(.sdata2) ++ *(.dynamic) ++ CONSTRUCTORS ++ } ++ _edata = .; ++ PROVIDE (edata = .); ++ ++ . = .; ++ __u_boot_cmd_start = .; ++ .u_boot_cmd : { *(.u_boot_cmd) } ++ __u_boot_cmd_end = .; ++ ++ ++ . = .; ++ __start___ex_table = .; ++ __ex_table : { *(__ex_table) } ++ __stop___ex_table = .; ++ ++ . = ALIGN(256); ++ __init_begin = .; ++ .text.init : { *(.text.init) } ++ .data.init : { *(.data.init) } ++ . = ALIGN(256); ++ __init_end = .; ++ ++ __bss_start = .; ++ .bss : ++ { ++ *(.sbss) *(.scommon) ++ *(.dynbss) ++ *(.bss) ++ *(COMMON) ++ } ++ _end = . ; ++ PROVIDE (end = .); ++} +diff -Naupr u-boot-1.1.6/board/tqm5200/cam5200_flash.c u-boot-1.1.6-fsl-1/board/tqm5200/cam5200_flash.c +--- u-boot-1.1.6/board/tqm5200/cam5200_flash.c 2006-11-02 08:15:01.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/board/tqm5200/cam5200_flash.c 2006-11-30 12:34:13.000000000 -0600 +@@ -759,7 +759,7 @@ unsigned long flash_init(void) + + if (flash_info[i].flash_id == FLASH_UNKNOWN) { + printf("## Unknown FLASH on Bank %d - Size = 0x%08lx = %ld MB\n", +- i, size_b[i], size_b[i] << 20); ++ i+1, size_b[i], size_b[i] << 20); + flash_info[i].sector_count = -1; + flash_info[i].size = 0; + } +diff -Naupr u-boot-1.1.6/board/tqm5200/tqm5200.c u-boot-1.1.6-fsl-1/board/tqm5200/tqm5200.c +--- u-boot-1.1.6/board/tqm5200/tqm5200.c 2006-11-02 08:15:01.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/board/tqm5200/tqm5200.c 2006-11-30 12:34:13.000000000 -0600 +@@ -289,7 +289,7 @@ int checkboard (void) + #elif defined(CONFIG_TB5200) + # define CARRIER_NAME "TB5200" + #elif defined(CONFIG_CAM5200) +-# define CARRIER_NAME "Cam5200" ++# define CARRIER_NAME "CAM5200" + #elif defined(CONFIG_FO300) + # define CARRIER_NAME "FO300" + #else +@@ -341,9 +341,7 @@ void pci_init_board(void) + #define SM501_GPIO_DATA_DIR_HIGH 0x0001000CUL + #define SM501_GPIO_DATA_HIGH 0x00010004UL + #define SM501_GPIO_51 0x00080000UL +-#else +-#define GPIO_PSC1_4 0x01000000UL +-#endif ++#endif /* CONFIG MINIFAP */ + + void init_ide_reset (void) + { +@@ -381,9 +379,9 @@ void ide_set_reset (int idereset) + } + #else + if (idereset) { +- *(vu_long *) MPC5XXX_WU_GPIO_DATA &= ~GPIO_PSC1_4; ++ *(vu_long *) MPC5XXX_WU_GPIO_DATA_O &= ~GPIO_PSC1_4; + } else { +- *(vu_long *) MPC5XXX_WU_GPIO_DATA |= GPIO_PSC1_4; ++ *(vu_long *) MPC5XXX_WU_GPIO_DATA_O |= GPIO_PSC1_4; + } + #endif + } +diff -Naupr u-boot-1.1.6/board/tqm834x/pci.c u-boot-1.1.6-fsl-1/board/tqm834x/pci.c +--- u-boot-1.1.6/board/tqm834x/pci.c 2006-11-02 08:15:01.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/board/tqm834x/pci.c 2006-11-10 11:24:29.000000000 -0600 +@@ -69,17 +69,17 @@ void + pci_init_board(void) + { + volatile immap_t * immr; +- volatile clk8349_t * clk; +- volatile law8349_t * pci_law; +- volatile pot8349_t * pci_pot; +- volatile pcictrl8349_t * pci_ctrl; +- volatile pciconf8349_t * pci_conf; ++ volatile clk83xx_t * clk; ++ volatile law83xx_t * pci_law; ++ volatile pot83xx_t * pci_pot; ++ volatile pcictrl83xx_t * pci_ctrl; ++ volatile pciconf83xx_t * pci_conf; + u16 reg16; + u32 reg32; + struct pci_controller * hose; + +- immr = (immap_t *)CFG_IMMRBAR; +- clk = (clk8349_t *)&immr->clk; ++ immr = (immap_t *)CFG_IMMR; ++ clk = (clk83xx_t *)&immr->clk; + pci_law = immr->sysconf.pcilaw; + pci_pot = immr->ios.pot; + pci_ctrl = immr->pci_ctrl; +@@ -186,8 +186,8 @@ pci_init_board(void) + hose->region_count = 3; + + pci_setup_indirect(hose, +- (CFG_IMMRBAR+0x8300), +- (CFG_IMMRBAR+0x8304)); ++ (CFG_IMMR+0x8300), ++ (CFG_IMMR+0x8304)); + + pci_register_hose(hose); + +diff -Naupr u-boot-1.1.6/board/tqm834x/tqm834x.c u-boot-1.1.6-fsl-1/board/tqm834x/tqm834x.c +--- u-boot-1.1.6/board/tqm834x/tqm834x.c 2006-11-02 08:15:01.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/board/tqm834x/tqm834x.c 2006-11-10 11:24:29.000000000 -0600 +@@ -69,7 +69,7 @@ static void set_cs_config(short cs, long + static void set_ddr_config(void); + + /* Local variable */ +-static volatile immap_t *im = (immap_t *)CFG_IMMRBAR; ++static volatile immap_t *im = (immap_t *)CFG_IMMR; + + /************************************************************************** + * Board initialzation after relocation to RAM. Used to detect the number +@@ -147,7 +147,7 @@ int checkboard (void) + volatile immap_t * immr; + u32 w, f; + +- immr = (immap_t *)CFG_IMMRBAR; ++ immr = (immap_t *)CFG_IMMR; + if (!(immr->reset.rcwh & RCWH_PCIHOST)) { + printf("PCI: NOT in host mode..?!\n"); + return 0; +diff -Naupr u-boot-1.1.6/board/v38b/ethaddr.c u-boot-1.1.6-fsl-1/board/v38b/ethaddr.c +--- u-boot-1.1.6/board/v38b/ethaddr.c 2006-11-02 08:15:01.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/board/v38b/ethaddr.c 2006-11-10 11:24:29.000000000 -0600 +@@ -1,5 +1,4 @@ + /* +- * + * (C) Copyright 2006 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * +@@ -25,48 +24,13 @@ + #include <common.h> + #include <mpc5xxx.h> + +-#define GPIO_ENABLE (MPC5XXX_WU_GPIO) +- +-/* Open Drain Emulation Register */ +-#define GPIO_ODR (MPC5XXX_WU_GPIO + 0x04) +- +-/* Data Direction Register */ +-#define GPIO_DDR (MPC5XXX_WU_GPIO + 0x08) +- +-/* Data Value Out Register */ +-#define GPIO_DVOR (MPC5XXX_WU_GPIO + 0x0C) +- +-/* Interrupt Enable Register */ +-#define GPIO_IER (MPC5XXX_WU_GPIO + 0x10) +- +-/* Individual Interrupt Enable Register */ +-#define GPIO_IIER (MPC5XXX_WU_GPIO + 0x14) +- +-/* Interrupt Type Register */ +-#define GPIO_ITR (MPC5XXX_WU_GPIO + 0x18) +- +-/* Master Enable Register */ +-#define GPIO_MER (MPC5XXX_WU_GPIO + 0x1C) +- +-/* Data Input Value Register */ +-#define GPIO_DIVR (MPC5XXX_WU_GPIO + 0x20) +- +-/* Status Register */ +-#define GPIO_SR (MPC5XXX_WU_GPIO + 0x24) +- +-#define PSC6_0 0x10000000 +-#define WKUP_7 0x80000000 +- +-/* For NS4 A/B board define WKUP_7, for V38B board PSC_6 */ +-#define GPIO_PIN PSC6_0 ++/* For the V38B board the pin is GPIO_PSC_6 */ ++#define GPIO_PIN GPIO_PSC6_0 + + #define NO_ERROR 0 + #define ERR_NO_NUMBER 1 + #define ERR_BAD_NUMBER 2 + +-typedef volatile unsigned long GPIO_REG; +-typedef GPIO_REG *GPIO_REG_PTR; +- + static int is_high(void); + static int check_device(void); + static void io_out(int value); +@@ -79,33 +43,34 @@ static void write_byte(unsigned char com + void read_2501_memory(unsigned char *psernum, unsigned char *perr); + void board_get_enetaddr(uchar *enetaddr); + ++ + static int is_high() + { +- return (* ((vu_long *) GPIO_DIVR) & GPIO_PIN); ++ return (*((vu_long *) MPC5XXX_WU_GPIO_DATA_I) & GPIO_PIN); + } + + static void io_out(int value) + { + if (value) +- *((vu_long *) GPIO_DVOR) |= GPIO_PIN; ++ *((vu_long *) MPC5XXX_WU_GPIO_DATA_O) |= GPIO_PIN; + else +- *((vu_long *) GPIO_DVOR) &= ~GPIO_PIN; ++ *((vu_long *) MPC5XXX_WU_GPIO_DATA_O) &= ~GPIO_PIN; + } + + static void io_input() + { +- *((vu_long *) GPIO_DDR) &= ~GPIO_PIN; ++ *((vu_long *) MPC5XXX_WU_GPIO_DIR) &= ~GPIO_PIN; + udelay(3); /* allow input to settle */ + } + + static void io_output() + { +- *((vu_long *) GPIO_DDR) |= GPIO_PIN; ++ *((vu_long *) MPC5XXX_WU_GPIO_DIR) |= GPIO_PIN; + } + + static void init_gpio() + { +- *((vu_long *) GPIO_ENABLE) |= GPIO_PIN; /* Enable appropriate pin */ ++ *((vu_long *) MPC5XXX_WU_GPIO_ENABLE) |= GPIO_PIN; /* Enable appropriate pin */ + } + + void read_2501_memory(unsigned char *psernum, unsigned char *perr) +@@ -117,8 +82,8 @@ void read_2501_memory(unsigned char *pse + *perr = 0; + crcval = 0; + +- for (i=0; i<NBYTES; i++) +- ++ for (i = 0; i < NBYTES; i++) ++ buf[i] = 0; + + if (!check_device()) + *perr = ERR_NO_NUMBER; +@@ -130,10 +95,10 @@ void read_2501_memory(unsigned char *pse + write_byte(0x00); + read_byte(&crcval); /* Read CRC of address and command */ + +- for (i=0; i<NBYTES; i++) +- read_byte( &buf[i] ); ++ for (i = 0; i < NBYTES; i++) ++ read_byte(&buf[i]); + } +- if (strncmp((const char*) &buf[11], "MAREL IEEE 802.3", 16)) { ++ if (strncmp((const char *) &buf[11], "MAREL IEEE 802.3", 16)) { + *perr = ERR_BAD_NUMBER; + psernum[0] = 0x00; + psernum[1] = 0xE0; +@@ -141,8 +106,7 @@ void read_2501_memory(unsigned char *pse + psernum[3] = 0xFF; + psernum[4] = 0xFF; + psernum[5] = 0xFF; +- } +- else { ++ } else { + psernum[0] = 0x00; + psernum[1] = 0xE0; + psernum[2] = 0xEE; +@@ -173,27 +137,23 @@ static void write_byte(unsigned char com + { + char i; + +- for (i=0; i<8; i++) { ++ for (i = 0; i < 8; i++) { + /* 1 us to 15 us low pulse starts bit slot */ + /* Start with high pulse for 3 us */ + io_input(); +- + udelay(3); + + io_out(0); + io_output(); +- + udelay(3); + + if (command & 0x01) { + /* 60 us high for 1-bit */ + io_input(); + udelay(60); +- } +- else { ++ } else + /* 60 us low for 0-bit */ + udelay(60); +- } + /* Leave pin as input */ + io_input(); + +@@ -201,11 +161,11 @@ static void write_byte(unsigned char com + } + } + +-static void read_byte(unsigned char *data) ++static void read_byte(unsigned char *data) + { + unsigned char i, rdat = 0; + +- for (i=0; i<8; i++) { ++ for (i = 0; i < 8; i++) { + /* read one bit from one-wire device */ + + /* 1 - 15 us low starts bit slot */ +@@ -233,22 +193,21 @@ static void read_byte(unsigned char *da + + void board_get_enetaddr(uchar *enetaddr) + { +- unsigned char sn[6], err=NO_ERROR; ++ unsigned char sn[6], err = NO_ERROR; + + init_gpio(); + + read_2501_memory(sn, &err); + + if (err == NO_ERROR) { +- sprintf(enetaddr, "%02x:%02x:%02x:%02x:%02x:%02x", ++ sprintf((char *)enetaddr, "%02x:%02x:%02x:%02x:%02x:%02x", + sn[0], sn[1], sn[2], sn[3], sn[4], sn[5]); + printf("MAC address: %s\n", enetaddr); +- setenv("ethaddr", enetaddr); +- } +- else { +- sprintf(enetaddr, "00:01:02:03:04:05"); ++ setenv("ethaddr", (char *)enetaddr); ++ } else { ++ sprintf((char *)enetaddr, "00:01:02:03:04:05"); + printf("Error reading MAC address.\n"); + printf("Setting default to %s\n", enetaddr); +- setenv("ethaddr", enetaddr); ++ setenv("ethaddr", (char *)enetaddr); + } + } +diff -Naupr u-boot-1.1.6/board/v38b/u-boot.lds u-boot-1.1.6-fsl-1/board/v38b/u-boot.lds +--- u-boot-1.1.6/board/v38b/u-boot.lds 2006-11-02 08:15:01.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/board/v38b/u-boot.lds 2006-11-10 11:24:29.000000000 -0600 +@@ -61,6 +61,7 @@ SECTIONS + *(.rodata) + *(.rodata1) + *(.rodata.str1.4) ++ *(.eh_frame) + } + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } +@@ -93,11 +94,13 @@ SECTIONS + _edata = .; + PROVIDE (edata = .); + ++ . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + ++ . = .; + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; +diff -Naupr u-boot-1.1.6/board/v38b/v38b.c u-boot-1.1.6-fsl-1/board/v38b/v38b.c +--- u-boot-1.1.6/board/v38b/v38b.c 2006-11-02 08:15:01.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/board/v38b/v38b.c 2006-11-10 11:24:29.000000000 -0600 +@@ -28,43 +28,44 @@ + #include <mpc5xxx.h> + #include <asm/processor.h> + ++ + #ifndef CFG_RAMBOOT + static void sdram_start(int hi_addr) + { + long hi_addr_bit = hi_addr ? 0x01000000 : 0; + + /* unlock mode register */ +- *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000000 | hi_addr_bit; ++ *(vu_long *) MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000000 | hi_addr_bit; + __asm__ volatile ("sync"); + + /* precharge all banks */ +- *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000002 | hi_addr_bit; ++ *(vu_long *) MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000002 | hi_addr_bit; + __asm__ volatile ("sync"); + + #if SDRAM_DDR + /* set mode register: extended mode */ +- *(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_EMODE; ++ *(vu_long *) MPC5XXX_SDRAM_MODE = SDRAM_EMODE; + __asm__ volatile ("sync"); + + /* set mode register: reset DLL */ +- *(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_MODE | 0x04000000; ++ *(vu_long *) MPC5XXX_SDRAM_MODE = SDRAM_MODE | 0x04000000; + __asm__ volatile ("sync"); + #endif /* SDRAM_DDR */ + + /* precharge all banks */ +- *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000002 | hi_addr_bit; ++ *(vu_long *) MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000002 | hi_addr_bit; + __asm__ volatile ("sync"); + + /* auto refresh */ +- *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000004 | hi_addr_bit; ++ *(vu_long *) MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000004 | hi_addr_bit; + __asm__ volatile ("sync"); + + /* set mode register */ +- *(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_MODE; ++ *(vu_long *) MPC5XXX_SDRAM_MODE = SDRAM_MODE; + __asm__ volatile ("sync"); + + /* normal operation */ +- *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | hi_addr_bit; ++ *(vu_long *) MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | hi_addr_bit; + __asm__ volatile ("sync"); + } + #endif /* !CFG_RAMBOOT */ +@@ -80,18 +81,18 @@ long int initdram(int board_type) + ulong test1, test2; + + /* setup SDRAM chip selects */ +- *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x0000001e; /* 2G at 0x0 */ +- *(vu_long *)MPC5XXX_SDRAM_CS1CFG = 0x80000000; /* disabled */ ++ *(vu_long *) MPC5XXX_SDRAM_CS0CFG = 0x0000001e; /* 2G at 0x0 */ ++ *(vu_long *) MPC5XXX_SDRAM_CS1CFG = 0x80000000; /* disabled */ + __asm__ volatile ("sync"); + + /* setup config registers */ +- *(vu_long *)MPC5XXX_SDRAM_CONFIG1 = SDRAM_CONFIG1; +- *(vu_long *)MPC5XXX_SDRAM_CONFIG2 = SDRAM_CONFIG2; ++ *(vu_long *) MPC5XXX_SDRAM_CONFIG1 = SDRAM_CONFIG1; ++ *(vu_long *) MPC5XXX_SDRAM_CONFIG2 = SDRAM_CONFIG2; + __asm__ volatile ("sync"); + + #if SDRAM_DDR + /* set tap delay */ +- *(vu_long *)MPC5XXX_CDM_PORCFG = SDRAM_TAPDELAY; ++ *(vu_long *) MPC5XXX_CDM_PORCFG = SDRAM_TAPDELAY; + __asm__ volatile ("sync"); + #endif /* SDRAM_DDR */ + +@@ -112,20 +113,20 @@ long int initdram(int board_type) + + /* set SDRAM CS0 size according to the amount of RAM found */ + if (dramsize > 0) +- *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x13 + __builtin_ffs(dramsize >> 20) - 1; ++ *(vu_long *) MPC5XXX_SDRAM_CS0CFG = 0x13 + __builtin_ffs(dramsize >> 20) - 1; + else +- *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0; /* disabled */ ++ *(vu_long *) MPC5XXX_SDRAM_CS0CFG = 0; /* disabled */ + + /* let SDRAM CS1 start right after CS0 */ +- *(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize + 0x0000001e;/* 2G */ ++ *(vu_long *) MPC5XXX_SDRAM_CS1CFG = dramsize + 0x0000001e;/* 2G */ + + /* find RAM size using SDRAM CS1 only */ + if (!dramsize) + sdram_start(0); +- test2 = test1 = get_ram_size((long *)(CFG_SDRAM_BASE + dramsize), 0x80000000); ++ test2 = test1 = get_ram_size((long *) (CFG_SDRAM_BASE + dramsize), 0x80000000); + if (!dramsize) { + sdram_start(1); +- test2 = get_ram_size((long *)(CFG_SDRAM_BASE + dramsize), 0x80000000); ++ test2 = get_ram_size((long *) (CFG_SDRAM_BASE + dramsize), 0x80000000); + } + if (test1 > test2) { + sdram_start(0); +@@ -139,22 +140,22 @@ long int initdram(int board_type) + + /* set SDRAM CS1 size according to the amount of RAM found */ + if (dramsize2 > 0) +- *(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize ++ *(vu_long *) MPC5XXX_SDRAM_CS1CFG = dramsize + | (0x13 + __builtin_ffs(dramsize2 >> 20) - 1); + else +- *(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize; /* disabled */ ++ *(vu_long *) MPC5XXX_SDRAM_CS1CFG = dramsize; /* disabled */ + + #else /* CFG_RAMBOOT */ + + /* retrieve size of memory connected to SDRAM CS0 */ +- dramsize = *(vu_long *)MPC5XXX_SDRAM_CS0CFG & 0xFF; ++ dramsize = *(vu_long *) MPC5XXX_SDRAM_CS0CFG & 0xFF; + if (dramsize >= 0x13) + dramsize = (1 << (dramsize - 0x13)) << 20; + else + dramsize = 0; + + /* retrieve size of memory connected to SDRAM CS1 */ +- dramsize2 = *(vu_long *)MPC5XXX_SDRAM_CS1CFG & 0xFF; ++ dramsize2 = *(vu_long *) MPC5XXX_SDRAM_CS1CFG & 0xFF; + if (dramsize2 >= 0x13) + dramsize2 = (1 << (dramsize2 - 0x13)) << 20; + else +@@ -176,7 +177,7 @@ long int initdram(int board_type) + if ((SVR_MJREV(svr) >= 2) && + (PVR_MAJ(pvr) == 1) && (PVR_MIN(pvr) == 4)) { + +- *(vu_long *)MPC5XXX_SDRAM_SDELAY = 0x04; ++ *(vu_long *) MPC5XXX_SDRAM_SDELAY = 0x04; + __asm__ volatile ("sync"); + } + +@@ -194,27 +195,42 @@ int checkboard (void) + int board_early_init_r(void) + { + /* +- * Now, when we are in RAM, enable flash write access for detection process. +- * Note that CS_BOOT cannot be cleared when executing in flash. ++ * Now, when we are in RAM, enable flash write access for the ++ * detection process. Note that CS_BOOT cannot be cleared when ++ * executing in flash. ++ */ ++ *(vu_long *) MPC5XXX_BOOTCS_CFG &= ~0x1; /* clear RO */ ++ ++#ifdef CONFIG_HW_WATCHDOG ++ /* ++ * Enable and configure the direction (output) of PSC3_9 - watchdog ++ * reset input. Refer to 7.3.2.2.[1,3,4] of the MPC5200B User's ++ * Manual. ++ */ ++ *(vu_long *) MPC5XXX_WU_GPIO_ENABLE |= GPIO_PSC3_9; ++ *(vu_long *) MPC5XXX_WU_GPIO_DIR |= GPIO_PSC3_9; ++#endif /* CONFIG_HW_WATCHDOG */ ++ ++ /* ++ * Enable GPIO_WKUP_7 to "read the status of the actual power ++ * situation". Default direction is input, so no need to set it ++ * explicitly. + */ +- *(vu_long *)MPC5XXX_BOOTCS_CFG &= ~0x1; /* clear RO */ ++ *(vu_long *) MPC5XXX_WU_GPIO_ENABLE |= GPIO_WKUP_7; + return 0; + } + + + #if defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET) +- +-#define GPIO_PSC1_4 0x01000000UL +- + void init_ide_reset(void) + { + debug("init_ide_reset\n"); + + /* Configure PSC1_4 as GPIO output for ATA reset */ + *(vu_long *) MPC5XXX_WU_GPIO_ENABLE |= GPIO_PSC1_4; +- *(vu_long *) MPC5XXX_WU_GPIO_DIR |= GPIO_PSC1_4; ++ *(vu_long *) MPC5XXX_WU_GPIO_DIR |= GPIO_PSC1_4; + /* Deassert reset */ +- *(vu_long *) MPC5XXX_WU_GPIO_DATA |= GPIO_PSC1_4; ++ *(vu_long *) MPC5XXX_WU_GPIO_DATA_O |= GPIO_PSC1_4; + } + + +@@ -223,30 +239,22 @@ void ide_set_reset(int idereset) + debug("ide_reset(%d)\n", idereset); + + if (idereset) { +- *(vu_long *) MPC5XXX_WU_GPIO_DATA &= ~GPIO_PSC1_4; ++ *(vu_long *) MPC5XXX_WU_GPIO_DATA_O &= ~GPIO_PSC1_4; + /* Make a delay. MPC5200 spec says 25 usec min */ + udelay(500000); + } else +- *(vu_long *) MPC5XXX_WU_GPIO_DATA |= GPIO_PSC1_4; ++ *(vu_long *) MPC5XXX_WU_GPIO_DATA_O |= GPIO_PSC1_4; + } + #endif /* defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET) */ + + +-void led_d4_on(void) +-{ +- /* TIMER7 as GPIO output low */ +- *(vu_long *) (MPC5XXX_GPT + 0x70) |= 0x24; +-} +- +- +-void led_d4_off(void) +-{ +- /* TIMER7 as GPIO output high */ +- *(vu_long *) (MPC5XXX_GPT + 0x70) |= 0x34; +-} +- +- ++#ifdef CONFIG_HW_WATCHDOG + void hw_watchdog_reset(void) + { +-/* TODO fill this in */ ++ /* ++ * MarelV38B has a TPS3705 watchdog. Spec says that to kick the dog ++ * we need a positive or negative transition on WDI i.e., our PSC3_9. ++ */ ++ *(vu_long *) MPC5XXX_WU_GPIO_DATA_O ^= GPIO_PSC3_9; + } ++#endif /* CONFIG_HW_WATCHDOG */ +diff -Naupr u-boot-1.1.6/CHANGELOG u-boot-1.1.6-fsl-1/CHANGELOG +--- u-boot-1.1.6/CHANGELOG 2006-11-02 08:15:01.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/CHANGELOG 2006-12-06 10:33:48.000000000 -0600 +@@ -1,3 +1,737 @@ ++commit 8d9a8610b8256331132227e9e6585c6bd5742787 ++Author: Wolfgang Denk <wd@pollux.denx.de> ++Date: Thu Nov 30 01:54:07 2006 +0100 ++ ++ Code cleanup. Update CHANGELOG. ++ ++commit 726e90aacf0b1ecb0e7055be574622fbe3e450ba ++Author: Grant Likely <grant.likely@secretlab.ca> ++Date: Wed Nov 29 16:23:42 2006 +0100 ++ ++ [PATCH] [MPC52xx] Use IPB bus frequency for SOC peripherals ++ ++ The soc node of the mpc52xx needs to be loaded with the IPB bus frequency, ++ not the XLB frequency. ++ ++ This patch depends on the previous patches for MPC52xx device tree support ++ ++ Signed-off-by: Grant Likely <grant.likely@secretlab.ca> ++ Signed-off-by: Sylvain Munaut <tnt@246tNt.com> ++ ++commit 1eac2a71417b6675b11aace72102a2e7fde8f5c6 ++Author: Stefan Roese <sr@denx.de> ++Date: Wed Nov 29 15:42:37 2006 +0100 ++ ++ [PATCH] Add support for Prodrive P3M750 & P3M7448 (P3Mx) boards ++ ++ This patch adds support for the Prodrive P3M750 (PPC750 & MV64460) ++ and the P3M7448 (MPC7448 & MV64460) PMC modules. Both modules are ++ quite similar and share the same board directory "prodrive/p3mx" ++ and the same config file "p3mx.h". ++ ++ Signed-off-by: Stefan Roese <sr@denx.de> ++ ++commit 1bdd46832aeb569f5e04b1f20f64318525b6525a ++Author: Stefan Roese <sr@denx.de> ++Date: Wed Nov 29 12:53:15 2006 +0100 ++ ++ [PATCH] common/cmd_elf.c: Enable loadaddr as parameter in bootvx command ++ ++ In the bootvx command the load address was only read from the env ++ variable "loadaddr" and not optionally passed as paramter as described ++ in the help. This is fixed with this patch. The behaviour is now the ++ same as in the bootelf command. ++ ++ Signed-off-by: Stefan Roese <sr@denx.de> ++ ++commit 4e26f1074c3ac1bd8fd094f0dc4a1c4a0b15a592 ++Author: Stefan Roese <sr@denx.de> ++Date: Wed Nov 29 12:03:57 2006 +0100 ++ ++ [PATCH] include/ppc440.h minor error affecting interrupts ++ ++ Fixed include/ppc440.c for UIC address Bug ++ ++ Corrects bug affecting the addresses for the universal interrupt ++ controller UIC2 and UIC3 on the PPC440 Epx, GRx, and SPE chips. ++ ++ Signed-off-by: Jeff Mann <mannj@embeddedplanet.com> ++ Signed-off-by: Stefan Roese <sr@denx.de> ++ ++commit 1939d969443ccf316cab2bf32ab1027d4db5ba1a ++Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> ++Date: Tue Nov 28 16:17:27 2006 -0600 ++ ++ Make fsl-i2c not conflict with SOFT I2C ++ ++ Signed-off-by: Timur Tabi <timur@freescale.com> ++ ++commit 14198bf768fdc958e3c1afd2404e5262208e98d7 ++Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> ++Date: Tue Nov 28 16:17:18 2006 -0600 ++ ++ Fix I2C master address initialization. ++ ++ Signed-off-by: Timur Tabi <timur@freescale.com> ++ ++commit cf3d045e51ca8dcc6cf759827140861d6ac25c04 ++Author: Kim Phillips <kim.phillips@freescale.com> ++Date: Tue Nov 28 23:31:19 2006 -0600 ++ ++ Assign maintainers for mpc8349emds and mpc8360emds ++ ++ Dave for mpc8360emds, and me for mpc8349emds. ++ ++commit 1aa934c81b77f2080d3ca4b226eab67b17a33961 ++Author: Kim Phillips <kim.phillips@freescale.com> ++Date: Tue Nov 28 23:28:33 2006 -0600 ++ ++ Eliminate gcc 4 'used uninitialized' warnings in drivers/qe/uccf.c ++ ++ give initial values for reg_num, shift, p_cmxucr in ucc_set_clk_src ++ since they are passed by reference to ucc_get_cmxucr_reg and assigned. ++ ++commit e857a5bdb3954b896c0920cb9d8d2b1b9c107ce5 ++Author: Timur Tabi <timur@freescale.com> ++Date: Tue Nov 28 12:09:35 2006 -0600 ++ ++ mpc83xx: Miscellaneous code style fixes ++ ++ Implement various code style fixes and similar changes. ++ ++ Signed-off-by: Timur Tabi <timur@freescale.com> ++ ++commit e59581c56ab5d6e0207ddac3b2c1d55cb36ec706 ++Author: Stefan Roese <sr@denx.de> ++Date: Tue Nov 28 17:55:49 2006 +0100 ++ ++ [PATCH] Enable the IceCube/lite5200 variants to pass a device tree to Linux. ++ ++ This patch adds the code and configuration necessary to boot with an ++ arch/powerpc Linux kernel. ++ ++ Signed-off-by: Grant Likely <grant.likely@gmail.com> ++ Acked-by: Jon Loeliger <jdl@freescale.com> ++ ++commit e732faec95a83cb468b4850ae807c8301dde8f6a ++Author: Stefan Roese <sr@denx.de> ++Date: Tue Nov 28 16:09:24 2006 +0100 ++ ++ [PATCH] PPC4xx: 440SP Rev. C detection added ++ ++ Signed-off-by: Stefan Roese <sr@denx.de> ++ ++commit e7f3e9ff01fbd7fa72eb42a9675fbed6bc4736b0 ++Author: Stefan Roese <sr@denx.de> ++Date: Tue Nov 28 11:04:45 2006 +0100 ++ ++ [PATCH] nand: Fix patch merge problem ++ ++ Signed-off-by: Stefan Roese <sr@denx.de> ++ ++commit 4f4b602ec7524a032bdf3c6d28c7f525a4a67eaa ++Author: Wolfgang Denk <wd@pollux.denx.de> ++Date: Mon Nov 27 22:53:53 2006 +0100 ++ ++ Update CHANGELOG ++ ++commit f6e495f54cdb8fe340b9c03deab40ad746d52fae ++Author: Stefan Roese <sr@denx.de> ++Date: Mon Nov 27 17:43:25 2006 +0100 ++ ++ [PATCH] 4xx_enet.c: Correct the setting of zmiifer register ++ ++ Patch below corrects the setting of the zmiifer register, it was ++ overwritting the register rather than ORing the settings. ++ ++ Signed-off-by: Neil Wilson <NWilson@airspan.com> ++ Signed-off-by: Stefan Roese <sr@denx.de> ++ ++commit d1a72545296800b7e219f93104ad5836f0003d66 ++Author: Stefan Roese <sr@denx.de> ++Date: Mon Nov 27 17:34:10 2006 +0100 ++ ++ [PATCH] Select NAND embedded environment from board configuration ++ ++ The current NAND Bootloader setup forces the environment ++ variables to be in line with the bootloader. This change ++ enables the configuration to be made in the board include ++ file instead so that it can be individually enabled. ++ ++ Signed-off-by: Nick Spence <nick.spence@freescale.com> ++ Signed-off-by: Stefan Roese <sr@denx.de> ++ ++commit 15784862857c3c2214498defcfed84ff137fb81e ++Author: Stefan Roese <sr@denx.de> ++Date: Mon Nov 27 17:22:19 2006 +0100 ++ ++ [PATCH] nand_wait() timeout fixes ++ ++ Two fixes for the nand_wait() function in ++ drivers/nand/nand_base.c: ++ ++ 1. Use correct timeouts. The original timeouts in Linux ++ source are 400ms and 20ms not 40s and 20s ++ ++ 2. Return correct error value in case of timeout. 0 is ++ interpreted as OK. ++ ++ Signed-off-by: Rui Sousa <rui.sousa@laposte.net> ++ Signed-off-by: Stefan Roese <sr@denx.de> ++ ++commit da5553b095bf04f4f109ad7e565dae3aba47b230 ++Author: Stefan Roese <sr@denx.de> ++Date: Mon Nov 27 17:04:06 2006 +0100 ++ ++ [PATCH] Allow CONFIG_OF_FLAT_TREE to boot a non-arch/powerpc kernel ++ ++ This patch allows an arch/ppc kernel to be booted by just passing 1 or 2 ++ arguments to bootm. It removes the getenv("disable_of") test that used ++ to be used for this purpose. ++ ++ Signed-off-by: Grant Likely <grant.likely@secretlab.ca> ++ Acked-by: Jon Loeliger <jdl@freescale.com> ++ ++commit a9398e018593782c5fa7d0741955fc1256b34c1e ++Author: Wolfgang Denk <wd@pollux.denx.de> ++Date: Mon Nov 27 15:32:42 2006 +0100 ++ ++ Minor code cleanup. Update CHANGELOG. ++ ++commit 1729b92cde575476684bffe819d0b7791b57bff2 ++Author: Stefan Roese <sr@denx.de> ++Date: Mon Nov 27 14:52:04 2006 +0100 ++ ++ [PATCH] 4xx: Fix problem with board specific reset code (now for real) ++ ++ Signed-off-by: Stefan Roese <sr@denx.de> ++ ++commit cc5ee8a92a0e3ca6f727af71b8fd206460c7afd7 ++Author: Stefan Roese <sr@denx.de> ++Date: Mon Nov 27 14:49:51 2006 +0100 ++ ++ [PATCH] alpr: remove unused board specific flash driver ++ ++ Signed-off-by: Stefan Roese <sr@denx.de> ++ ++commit 1f94d162e2b5f0edc28d9fb11482502c44d218e1 ++Author: Stefan Roese <sr@denx.de> ++Date: Mon Nov 27 14:48:41 2006 +0100 ++ ++ [PATCH] 4xx: Fix problem with board specific reset code ++ ++ Signed-off-by: Stefan Roese <sr@denx.de> ++ ++commit ec0c2ec725aec9524a177a77ce75559e644a931a ++Author: Stefan Roese <sr@denx.de> ++Date: Mon Nov 27 14:46:06 2006 +0100 ++ ++ [PATCH] Remove testing 4xx enet PHY setup ++ ++ Signed-off-by: Stefan Roese <sr@denx.de> ++ ++commit 1c2ce2262069510f31c7d3fd7efd3d58b8c0c148 ++Author: Stefan Roese <sr@denx.de> ++Date: Mon Nov 27 14:12:17 2006 +0100 ++ ++ [PATCH] Update Prodrive ALPR board support (440GX) ++ ++ Signed-off-by: Stefan Roese <sr@denx.de> ++ ++commit 78d620ebb5871d252270dedfad60c6568993b780 ++Author: Wolfgang Denk <wd@atlas.denx.de> ++Date: Thu Nov 23 22:58:58 2006 +0100 ++ ++ Updates for TQM5200 modules: ++ - fix off-by-one error in board/tqm5200/cam5200_flash.c error message ++ - simplify "udate" definitions ++ ++commit 2053283304eeddf250d109e6791eb6fa4cad14f7 ++Author: Stefan Roese <sr@denx.de> ++Date: Wed Nov 22 13:20:50 2006 +0100 ++ ++ [PATCH] PPC4xx start.S: Fix for processor errata ++ ++ Fixed cpu/ppc4xx/start.S for 440EPx Errata: further corrects PPC440EPx ++ errata 1.12: 440_33 by moving patch up in code. ++ ++ Signed-off-by: Jeff Mann <mannj@embeddedplanet.com> ++ Signed-off-by: Stefan Roese <sr@denx.de> ++ ++commit 4ef6251403f637841000e0fef9e832aa01339822 ++Author: Stefan Roese <sr@denx.de> ++Date: Mon Nov 20 20:39:52 2006 +0100 ++ ++ [PATCH] Update AMCC Sequoia config file to support 64MByte NOR FLASH ++ ++ Signed-off-by: Stefan Roese <sr@denx.de> ++ ++commit e4bbd8da164b976d38616bd9c69c5e86e193cdf0 ++Author: Wolfgang Denk <wd@pollux.denx.de> ++Date: Mon Nov 20 10:28:30 2006 +0100 ++ ++ Update CHANGELOG ++ ++commit 260421a21e934a68d31fb6125b0fbd2631a8ca20 ++Author: Stefan Roese <sr@denx.de> ++Date: Mon Nov 13 13:55:24 2006 +0100 ++ ++ [PATCH] CFI driver AMD Command Set Top boot geometry reversal, etc. [Updated] ++ ++ * Adds support for AMD command set Top Boot flash geometry reversal ++ * Adds support for reading JEDEC Manufacturer ID and Device ID ++ * Adds support for displaying command set, manufacturer id and ++ device ids (flinfo) ++ * Makes flinfo output to be consistent when CFG_FLASH_EMPTY_INFO defined ++ * Removes outdated change history (refer to git log instead) ++ ++ Signed-off-by: Tolunay Orkun <listmember@orkun.us> ++ Signed-off-by: Stefan Roese <sr@denx.de> ++ ++commit b21b511d4c50408f4853f46f06b601272196223f ++Author: Wolfgang Denk <wd@pollux.denx.de> ++Date: Sun Nov 12 21:13:23 2006 +0100 ++ ++ Update CHANGELOG ++ ++commit ce3f1a40c507afbab06c5eb58ccdc6713eda3245 ++Author: Bartlomiej Sieka <tur@semihalf.com> ++Date: Sat Nov 11 22:48:22 2006 +0100 ++ ++ Disable the watchdog in the default config for the V38B board. ++ ++commit 44a47e6db2694841211f1c8fdbafd36992e9cd1a ++Author: Bartlomiej Sieka <tur@semihalf.com> ++Date: Sat Nov 11 22:43:00 2006 +0100 ++ ++ Change the GPIO pin multiplexing configuration for V38B. The USB GPIO pin ++ group is enabled for USB earlier (in cpu_init_f() instead of ++ usb_lowlevel_init()). ++ ++commit 91650b3e4de688038d4f71279c44858e3e2c6870 ++Author: Wolfgang Denk <wd@pollux.denx.de> ++Date: Mon Nov 6 17:06:36 2006 +0100 ++ ++ Sequential accesses to non-existent memory must be synchronized, ++ at least on G2 cores. ++ ++ This fixes get_ram_size() problems on MPC5200 Rev. B boards. ++ ++commit be5e61815d5a1fac290ce9c0ef09cb6a8e4288fa ++Author: Timur Tabi <timur@freescale.com> ++Date: Fri Nov 3 19:15:00 2006 -0600 ++ ++ mpc83xx: Update 83xx to use fsl_i2c.c ++ ++ Update the 83xx tree to use I2C support in drivers/fsl_i2c.c. Delete ++ cpu/mpc83xx/i2c.c, include/asm-ppc/i2c.h, and all references to those files. ++ Added multiple I2C bus support to fsl_i2c.c. ++ ++ Signed-off-by: Timur Tabi <timur@freescale.com> ++ ++commit d239d74b1c937984bc519083a8e7de373a390f06 ++Author: Timur Tabi <timur@freescale.com> ++Date: Fri Nov 3 12:00:28 2006 -0600 ++ ++ mpc83xx: Replace CFG_IMMRBAR with CFG_IMMR ++ ++ Replace all instances of CFG_IMMRBAR with CFG_IMMR, so that the 83xx ++ tree matches the other 8xxx trees. ++ ++ Signed-off-by: Timur Tabi <timur@freescale.com> ++ ++commit f7fb2e703ec9688541416962724adff70a7322cb ++Author: Kim Phillips <kim.phillips@freescale.com> ++Date: Thu Nov 2 19:47:11 2006 -0600 ++ ++ mpc83xx: Lindent and clean up cpu/mpc83xx/speed.c ++ ++commit 90f30a710a3c619b5405860a686c4ddfc495d4b6 ++Author: Dave Liu <daveliu@freescale.com> ++Date: Thu Nov 2 18:05:50 2006 -0600 ++ ++ mpc83xx: Fix the incorrect dcbz operation ++ ++ The 834x rev1.x silicon has one CPU5 errata. ++ ++ The issue is when the data cache locked with ++ HID0[DLOCK], the dcbz instruction looks like no-op inst. ++ ++ The right behavior of the data cache is when the data cache ++ Locked with HID0[DLOCK], the dcbz instruction allocates ++ new tags in cache. ++ ++ The 834x rev3.0 and later and 8360 have not this bug inside. ++ ++ So, when 834x rev3.0/8360 are working with ECC, the dcbz ++ instruction will corrupt the stack in cache, the processor will ++ checkstop reset. ++ ++ However, the 834x rev1.x can work with ECC with these code, ++ because the sillicon has this cache bug. The dcbz will not ++ corrupt the stack in cache. ++ Really, it is the fault code running on fault sillicon. ++ ++ This patch fix the incorrect dcbz operation. Instead of ++ CPU FP writing to initialise the ECC. ++ ++ CHANGELOG: ++ * Fix the incorrect dcbz operation instead of CPU FP ++ writing to initialise the ECC memory. Otherwise, it ++ will corrupt the stack in cache, The processor will checkstop ++ reset. ++ ++ Signed-off-by: Dave Liu <daveliu@freescale.com> ++ ++commit bf0b542d6773a5a1cbce77691f009b06d9aeb57d ++Author: Kim Phillips <kim.phillips@freescale.com> ++Date: Wed Nov 1 00:10:40 2006 -0600 ++ ++ mpc83xx: add OF_FLAT_TREE bits to 83xx boards ++ ++ add ft_pci_setup, OF_CPU, OF_SOC, OF_TBCLK, and ++ STDOUT_PATH configuration bits to mpc8349emds, ++ mpc8349itx, and mpc8360emds board code. ++ ++ redo environment to use bootm with the fdtaddr ++ for booting ARCH=powerpc kernels by default, ++ and provide default fdtaddr values. ++ ++commit 48041365b3420589ad464ebc7752e0053538b729 ++Author: Kim Phillips <kim.phillips@freescale.com> ++Date: Wed Nov 1 00:07:25 2006 -0600 ++ ++ mpc83xx: change ft code to modify local-mac-address property ++ ++ Update 83xx OF code to update local-mac-address properties ++ for ethernet instead of the obsolete 'address' property. ++ ++commit 9ca880a250870a7d55754291b5591d2b5fe89b54 ++Author: Timur Tabi <timur@freescale.com> ++Date: Tue Oct 31 21:23:16 2006 -0600 ++ ++ mpc83xx: Fix dual I2C support for the MPC8349ITX, MPC8349EMDS, TQM834x, and MPC8360EMDS ++ ++ This patch also adds an improved I2C set_speed(), which handles all clock ++ frequencies. ++ ++ Signed-off-by: Timur Tabi <timur@freescale.com> ++ ++commit ac4b5622ce050b5ee1e154b98df630d778661632 ++Author: Dave Liu <daveliu@freescale.com> ++Date: Tue Oct 31 19:54:59 2006 -0600 ++ ++ mpc83xx: add the README.mpc8360emds ++ ++ add doc/README.mpc8360emds to accompany the new board support ++ ++commit 7737d5c658c606f999dfbe3e86b0fed49e5c50ef ++Author: Dave Liu <daveliu@freescale.com> ++Date: Fri Nov 3 12:11:15 2006 -0600 ++ ++ mpc83xx: add QE ethernet support ++ ++ this patch adds support for the QUICC Engine based UCC gigabit ethernet device. ++ ++commit 5f8204394e39bbe8cd9f08b8f8d145b6c01f7c73 ++Author: Dave Liu <daveliu@freescale.com> ++Date: Fri Nov 3 19:33:44 2006 -0600 ++ ++ mpc83xx: Add MPC8360EMDS basic board support ++ ++ Add support for the Freescale MPC8360EMDS board. ++ Includes DDR, DUART, Local Bus, PCI. ++ ++commit 23892e49352de74f7fac36ff90bb1be143d195e3 ++Author: Dave Liu <daveliu@freescale.com> ++Date: Tue Oct 31 19:30:40 2006 -0600 ++ ++ mpc83xx: add the QUICC Engine (QE) immap file ++ ++ common QE immap file. Also required for 8360. ++ ++commit b701652a4992bdcc62fb1a6038a85beef9e55da4 ++Author: Dave Liu <daveliu@freescale.com> ++Date: Tue Oct 31 19:25:38 2006 -0600 ++ ++ mpc83xx: Add 8360 specifics to 83xx immap ++ ++ Mainly add QE device dependencies, with appropriate 8360 protection. ++ Lindent also run. ++ ++commit 988833324a7fda482c8ac3ca23eb539f8232e404 ++Author: Timur Tabi <timur@freescale.com> ++Date: Tue Oct 31 19:14:41 2006 -0600 ++ ++ mpc83xx: Fix PCI, USB, bootargs for MPC8349E-mITX ++ ++ PREREQUISITE PATCHES: ++ ++ * This patch can only be applied after the following patches have been applied: ++ ++ 1) DNX#2006092142000015 "Add support for the MPC8349E-mITX 1/2" ++ 2) DNX#2006092142000024 "Add support for the MPC8349E-mITX 2/2" ++ ++ CHANGELOG: ++ ++ * For the 8349E-mITX, fix some size values in pci_init_board(), enable ++ the clock for the 2nd USB board (Linux kernel will hang otherwise), ++ and fix the CONFIG_BOOTARGS macro. ++ ++ Signed-off-by: Timur Tabi <timur@freescale.com> ++ ++commit 2ad6b513b31070bd0c003792ed1c3e7f5d740357 ++Author: Timur Tabi <timur@freescale.com> ++Date: Tue Oct 31 18:44:42 2006 -0600 ++ ++ mpc83xx: Add support for the MPC8349E-mITX ++ ++ PREREQUISITE PATCHES: ++ ++ * This patch can only be applied after the following patches have been applied: ++ ++ 1) DNX#2006090742000024 "Add support for multiple I2C buses" ++ 2) DNX#2006090742000033 "Multi-bus I2C implementation of MPC834x" ++ 3) DNX#2006091242000041 "Additional MPC8349 support for multibus i2c" ++ 4) DNX#2006091242000078 "Add support for variable flash memory sizes on 83xx systems" ++ 5) DNX#2006091242000069 "Add support for Errata DDR6 on MPC 834x systems" ++ ++ CHANGELOG: ++ ++ * Add support for the Freescale MPC8349E-mITX reference design platform. ++ The second TSEC (Vitesse 7385 switch) is not supported at this time. ++ ++ Signed-off-by: Timur Tabi <timur@freescale.com> ++ ++commit 183da6d9b446cc12123455844ad1187e2375626f ++Author: Ben Warren <bwarren@qstreams.com> ++Date: Tue Sep 12 10:15:53 2006 -0400 ++ ++ Additional MPC8349 support for multibus i2c ++ ++ Hello, ++ ++ Here is a patch for a file that was accidentally left out of a previous ++ attempt. ++ ++ It accompanies the patch with ticket DNX#2006090742000024 ++ ++ CHANGELOG: ++ Change PCI initialization to use new multi-bus I2C API. ++ ++ regards, ++ Ben ++ ++commit b24f119d672b709d153ff2ac091d4aa63ec6877d ++Author: Ben Warren <bwarren@qstreams.com> ++Date: Thu Sep 7 16:51:04 2006 -0400 ++ ++ Multi-bus I2C implementation of MPC834x ++ ++ Hello, ++ ++ Attached is a patch implementing multiple I2C buses on the MPC834x CPU ++ family and the MPC8349EMDS board in particular. ++ This patch requires Patch 1 (Add support for multiple I2C buses). ++ Testing was performed on a 533MHz board. ++ ++ /*** Note: This patch replaces ticket DNX#2006083042000027 ***/ ++ ++ Signed-off-by: Ben Warren <bwarren@qstreams.com> ++ ++ CHANGELOG: ++ Implemented driver-level code to support two I2C buses on the ++ MPC834x CPU family and the MPC8349EMDS board. Available I2C bus speeds ++ are 50kHz, 100kHz and 400kHz on each bus. ++ ++ regards, ++ Ben ++ ++commit bb99ad6d8257bf828f150d40f507b30d80a4a7ae ++Author: Ben Warren <bwarren@qstreams.com> ++Date: Thu Sep 7 16:50:54 2006 -0400 ++ ++ Add support for multiple I2C buses ++ ++ Hello, ++ ++ Attached is a patch providing support for multiple I2C buses at the ++ command level. The second part of the patch includes an implementation ++ for the MPC834x CPU and MPC8349EMDS board. ++ ++ /*** Note: This patch replaces ticket DNX#2006083042000018 ***/ ++ ++ Signed-off-by: Ben Warren <bwarren@qstreams.com> ++ ++ Overview: ++ ++ 1. Include new 'i2c' command (based on USB implementation) using ++ CONFIG_I2C_CMD_TREE. ++ ++ 2. Allow multiple buses by defining CONFIG_I2C_MULTI_BUS. Note that ++ the commands to change bus number and speed are only available under the ++ new 'i2c' command mentioned in the first bullet. ++ ++ 3. The option CFG_I2C_NOPROBES has been expanded to work in multi-bus ++ systems. When CONFIG_I2C_MULTI_BUS is used, this option takes the form ++ of an array of bus-device pairs. Otherwise, it is an array of uchar. ++ ++ CHANGELOG: ++ Added new 'i2c' master command for all I2C interaction. This is ++ conditionally compiled with CONFIG_I2C_CMD_TREE. New commands added for ++ setting I2C bus speed as well as changing the active bus if the board ++ has more than one (conditionally compiled with ++ CONFIG_I2C_MULTI_BUS). Updated NOPROBE logic to handle multiple buses. ++ Updated README. ++ ++ regards, ++ Ben ++ ++commit bed85caf872714ebf53013967a695c9d63acfc68 ++Author: Timur Tabi <timur@freescale.com> ++Date: Tue Oct 31 18:13:36 2006 -0600 ++ ++ mpc83xx: Add support for Errata DDR6 on MPC 834x systems ++ ++ CHANGELOG: ++ ++ * Errata DDR6, which affects all current MPC 834x processors, lists changes ++ required to maintain compatibility with various types of DDR memory. This ++ patch implements those changes. ++ ++ Signed-off-by: Timur Tabi <timur@freescale.com> ++ ++commit afd6e470f639883002c7c59d562690a5cb0f4865 ++Author: Timur Tabi <timur@freescale.com> ++Date: Wed Oct 25 18:45:23 2006 -0500 ++ ++ mpc83xx: fix TQM build by defining a CFG_FLASH_SIZE for it ++ ++commit 31068b7c4abeefcb2c8fd4fbeccc8ec6c6d0475a ++Author: Timur Tabi <timur@freescale.com> ++Date: Tue Aug 22 17:07:00 2006 -0500 ++ ++ mpc83xx: Add support for variable flash memory sizes on 83xx systems ++ ++ CHANGELOG: ++ ++ * On 83xx systems, use the CFG_FLASH_SIZE macro to program the LBC local access ++ window registers, instead of using a hard-coded value of 8MB. ++ ++ Signed-off-by: Timur Tabi <timur@freescale.com> ++ ++commit 2fc34ae66e73fa7841d1a006dc1b5dcbc1f78965 ++Author: Tanya Jiang <tanya.jiang@freescale.com> ++Date: Thu Aug 3 18:38:13 2006 +0800 ++ ++ mpc83xx: Unified TQM834x variable names with 83xx and consolidated macros ++ ++ Unified TQM834x variable names with 83xx and consolidated macro ++ in preparation for the 8360 and other upcoming 83xx devices. ++ ++ Signed-off-by: Tanya Jiang <tanya.jiang@freescale.com> ++ ++commit f6eda7f80ccc13d658020268c507d7173cf2e8aa ++Author: Dave Liu <daveliu@freescale.com> ++Date: Wed Oct 25 14:41:21 2006 -0500 ++ ++ mpc83xx: Changed to unified mpx83xx names and added common 83xx changes ++ ++ Incorporated the common unified variable names and the changes in preparation ++ for releasing mpc8360 patches. ++ ++ Signed-off-by: Dave Liu <daveliu@freescale.com> ++ ++commit 3894c46c27c64891f93ac04edde86a9fa9758d92 ++Author: Tanya Jiang <tanya.jiang@freescale.com> ++Date: Thu Aug 3 18:36:02 2006 +0800 ++ ++ mpc83xx: Fix missing build for mpc8349emds pci.c ++ ++ Make pci build for mpc8349emds ++ ++ Signed-off-by: Tanya Jiang <tanya.jiang@freescale.com> ++ ++commit 09a81ff740b29deea1e2ab08a3c2ac136c2e6219 ++Author: Tanya Jiang <tanya.jiang@freescale.com> ++Date: Thu Aug 3 18:39:49 2006 +0800 ++ ++ mpc83xx: Removed unused file resetvec.S for mpc83xx cpu ++ ++ Removed unused file resetvec.S for mpc83xx cpu ++ ++ Signed-off-by: Tanya Jiang <tanya.jiang@freescale.com> ++ ++commit 04f899fc465c3e44f2b55ecc70618f5696fc0ddf ++Author: Nick Spence <Nick.Spence@freescale.com> ++Date: Sat Sep 30 00:32:59 2006 -0700 ++ ++ NAND Flash verify across block boundaries ++ ++ This patch addresses a problem when CONFIG_MTD_NAND_VERIFY_WRITE is ++ defined ++ and the write crosses a block boundary. The pointer to the verification ++ buffer (bufstart) is not being updated to reflect the starting of the ++ new ++ block so the verification of the second block fails. ++ ++ CHANGELOG: ++ ++ * Fix NAND FLASH page verification across block boundaries ++ ++commit f484dc791a3932537213c43c654cc1295c64b84c ++Author: Nick Spence <nick.spence@freescale.com> ++Date: Thu Sep 7 07:39:46 2006 -0700 ++ ++ Added RGMII support to the TSECs and Marvell 881111 Phy ++ ++ Added a phy initialization to adjust the RGMII RX and TX timing ++ Always set the R100 bit in 100 BaseT mode regardless of the TSEC mode ++ ++ Signed-off-by: Nick Spence <nick.spence@freescale.com> ++ ++commit c59200443072353044aa4bf737a5a60f9a9af231 ++Author: Wolfgang Denk <wd@pollux.denx.de> ++Date: Thu Nov 2 15:15:01 2006 +0100 ++ ++ Release U-Boot 1.1.6 ++ ++commit 25721b5cec2be4bce79cfade17ec8f6aa1e67526 ++Author: Bartlomiej Sieka <tur@semihalf.com> ++Date: Wed Nov 1 02:04:38 2006 +0100 ++ ++ Finish up support for MarelV38B board ++ - add watchdog support ++ - enable GPIO_WKUP_7 pin for input ++ - code cleanup ++ ++commit ffa150bc90c943ca265170bd1be3f293674dd5c7 ++Author: Bartlomiej Sieka <tur@semihalf.com> ++Date: Wed Nov 1 01:45:46 2006 +0100 ++ ++ - Fix issues related to the use of ELDK 4 when compiling for MarelV38B: ++ * remove warnings when compiling ethaddr.c ++ * adjust linker script (fixes a crash resulting from incorrect ++ definition of __u_boot_cmd_start) ++ - Some MarelV38B code cleanup. ++ ++commit dae80f3caf9754a6dd3ddf3cf903d0c46cbd4385 ++Author: Bartlomiej Sieka <tur@semihalf.com> ++Date: Wed Nov 1 01:38:16 2006 +0100 ++ ++ - Add MPC5XXX register definition MPC5XXX_WU_GPIO_DATA_I and change the ++ MPC5XXX_WU_GPIO_DATA macro to MPC5XXX_WU_GPIO_DATA_O (per MPC5200 User's ++ Manual). Replace the uses of MPC5XXX_WU_GPIO_DATA with ++ MPC5XXX_WU_GPIO_DATA_O for affected boards. ++ ++ - Add defintions for some MPC5XXX GPIO pins. ++ ++commit 82d9c9ec29a1bec1b03ba616425ebaed231072c8 ++Author: Bartlomiej Sieka <tur@semihalf.com> ++Date: Wed Nov 1 01:34:29 2006 +0100 ++ ++ Changed MarelV38B board make target to lowercase. Config file cleanup. ++ + commit 1954be6e9c9421b45d0a9d05b10356acc7563150 + Author: Wolfgang Denk <wd@pollux.denx.de> + Date: Sun Oct 29 01:03:51 2006 +0200 +@@ -451,6 +1185,34 @@ Date: Tue Oct 10 17:02:22 2006 -0500 + + Fix whitespace and 80-col issues. + ++commit 5c912cb1c31266c66ca59b36f9b6f87296421d75 ++Author: Stefan Roese <sr@denx.de> ++Date: Sat Oct 7 11:36:51 2006 +0200 ++ ++ CFG_NAND_QUIET_TEST added to not warn upon missing NAND device ++ Patch by Stefan Roese, 07 Oct 2006 ++ ++commit 5bc528fa4da751d472397b308137238a6465afd2 ++Author: Stefan Roese <sr@denx.de> ++Date: Sat Oct 7 11:35:25 2006 +0200 ++ ++ Update ALPR code (NAND support working now) ++ Patch by Stefan Roese, 07 Oct 2006 ++ ++commit 77d5034847d328753b80c46b83f960a14a26f40e ++Author: Stefan Roese <sr@denx.de> ++Date: Sat Oct 7 11:33:03 2006 +0200 ++ ++ Remove compile warnings in fpga code ++ Patch by Stefan Roese, 07 Oct 2006 ++ ++commit f3443867e90d2979a7dd1c65b0d537777e1f9850 ++Author: Stefan Roese <sr@denx.de> ++Date: Sat Oct 7 11:30:52 2006 +0200 ++ ++ Add CONFIG_BOARD_RESET to configure board specific reset function ++ Patch by Stefan Roese, 07 Oct 2006 ++ + commit f55df18187e7a45cb73fec4370d12135e6691ae1 + Author: John Traill <john.traill@freescale.com> + Date: Fri Sep 29 08:23:12 2006 +0100 +@@ -683,6 +1445,21 @@ Date: Wed Aug 16 10:54:09 2006 -0500 + + Signed-off-by: Matthew McClintock <msm@freescale.com> + ++commit 899620c2d66d4eef3b2a0034d062e71d45d886c9 ++Author: Stefan Roese <sr@denx.de> ++Date: Tue Aug 15 14:22:35 2006 +0200 ++ ++ Add initial support for the ALPR board from Prodrive ++ NAND needs some additional testing ++ Patch by Heiko Schocher, 15 Aug 2006 ++ ++commit f0ff4692ff3372dec55074a8eb444943ab095abb ++Author: Stefan Roese <sr@denx.de> ++Date: Tue Aug 15 14:15:51 2006 +0200 ++ ++ Add FPGA Altera Cyclone 2 support ++ Patch by Heiko Schocher, 15 Aug 2006 ++ + commit fecf1c7e4de1b2779edc18742b91c22bdc32b68b + Author: Jon Loeliger <jdl@freescale.com> + Date: Mon Aug 14 15:33:38 2006 -0500 +diff -Naupr u-boot-1.1.6/common/altera.c u-boot-1.1.6-fsl-1/common/altera.c +--- u-boot-1.1.6/common/altera.c 2006-11-02 08:15:01.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/common/altera.c 2006-11-30 12:34:13.000000000 -0600 +@@ -50,15 +50,20 @@ int altera_load( Altera_desc *desc, void + { + int ret_val = FPGA_FAIL; /* assume a failure */ + +- if (!altera_validate (desc, __FUNCTION__)) { ++ if (!altera_validate (desc, (char *)__FUNCTION__)) { + printf ("%s: Invalid device descriptor\n", __FUNCTION__); + } else { + switch (desc->family) { + case Altera_ACEX1K: ++ case Altera_CYC2: + #if (CONFIG_FPGA & CFG_ACEX1K) + PRINTF ("%s: Launching the ACEX1K Loader...\n", + __FUNCTION__); + ret_val = ACEX1K_load (desc, buf, bsize); ++#elif (CONFIG_FPGA & CFG_CYCLON2) ++ PRINTF ("%s: Launching the CYCLON II Loader...\n", ++ __FUNCTION__); ++ ret_val = CYC2_load (desc, buf, bsize); + #else + printf ("%s: No support for ACEX1K devices.\n", + __FUNCTION__); +@@ -78,7 +83,7 @@ int altera_dump( Altera_desc *desc, void + { + int ret_val = FPGA_FAIL; /* assume a failure */ + +- if (!altera_validate (desc, __FUNCTION__)) { ++ if (!altera_validate (desc, (char *)__FUNCTION__)) { + printf ("%s: Invalid device descriptor\n", __FUNCTION__); + } else { + switch (desc->family) { +@@ -106,13 +111,16 @@ int altera_info( Altera_desc *desc ) + { + int ret_val = FPGA_FAIL; + +- if (altera_validate (desc, __FUNCTION__)) { ++ if (altera_validate (desc, (char *)__FUNCTION__)) { + printf ("Family: \t"); + switch (desc->family) { + case Altera_ACEX1K: + printf ("ACEX1K\n"); + break; + /* Add new family types here */ ++ case Altera_CYC2: ++ printf ("CYCLON II\n"); ++ break; + default: + printf ("Unknown family type, %d\n", desc->family); + } +@@ -147,8 +155,11 @@ int altera_info( Altera_desc *desc ) + printf ("Device Function Table @ 0x%p\n", desc->iface_fns); + switch (desc->family) { + case Altera_ACEX1K: ++ case Altera_CYC2: + #if (CONFIG_FPGA & CFG_ACEX1K) + ACEX1K_info (desc); ++#elif (CONFIG_FPGA & CFG_CYCLON2) ++ CYC2_info (desc); + #else + /* just in case */ + printf ("%s: No support for ACEX1K devices.\n", +@@ -176,7 +187,7 @@ int altera_reloc( Altera_desc *desc, ulo + { + int ret_val = FPGA_FAIL; /* assume a failure */ + +- if (!altera_validate (desc, __FUNCTION__)) { ++ if (!altera_validate (desc, (char *)__FUNCTION__)) { + printf ("%s: Invalid device descriptor\n", __FUNCTION__); + } else { + switch (desc->family) { +@@ -188,6 +199,14 @@ int altera_reloc( Altera_desc *desc, ulo + __FUNCTION__); + #endif + break; ++ case Altera_CYC2: ++#if (CONFIG_FPGA & CFG_CYCLON2) ++ ret_val = CYC2_reloc (desc, reloc_offset); ++#else ++ printf ("%s: No support for CYCLON II devices.\n", ++ __FUNCTION__); ++#endif ++ break; + /* Add new family types here */ + default: + printf ("%s: Unsupported family type, %d\n", +diff -Naupr u-boot-1.1.6/common/cmd_bootm.c u-boot-1.1.6-fsl-1/common/cmd_bootm.c +--- u-boot-1.1.6/common/cmd_bootm.c 2006-11-02 08:15:01.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/common/cmd_bootm.c 2006-11-30 12:34:13.000000000 -0600 +@@ -833,10 +833,6 @@ do_bootm_linux (cmd_tbl_t *cmdtp, int fl + printf ("ERROR: flat device tree size does not agree with image\n"); + return; + } +- +- } else if (getenv("disable_of") == NULL) { +- printf ("ERROR: bootm needs flat device tree as third argument\n"); +- return; + } + #endif + if (!data) { +@@ -913,23 +909,11 @@ do_bootm_linux (cmd_tbl_t *cmdtp, int fl + + SHOW_BOOT_PROGRESS (15); + +-#ifndef CONFIG_OF_FLAT_TREE +- + #if defined(CFG_INIT_RAM_LOCK) && !defined(CONFIG_E500) + unlock_ram_in_cache(); + #endif + +- /* +- * Linux Kernel Parameters: +- * r3: ptr to board info data +- * r4: initrd_start or 0 if no initrd +- * r5: initrd_end - unused if r4 is 0 +- * r6: Start of command line string +- * r7: End of command line string +- */ +- (*kernel) (kbd, initrd_start, initrd_end, cmd_start, cmd_end); +- +-#else /* CONFIG_OF_FLAT_TREE */ ++#ifdef CONFIG_OF_FLAT_TREE + /* move of_flat_tree if needed */ + if (of_data) { + ulong of_start, of_len; +@@ -948,30 +932,36 @@ do_bootm_linux (cmd_tbl_t *cmdtp, int fl + of_start, of_start + of_len - 1); + memmove ((void *)of_start, (void *)of_data, of_len); + } ++#endif + +- ft_setup(of_flat_tree, kbd, initrd_start, initrd_end); +- /* ft_dump_blob(of_flat_tree); */ +- +-#if defined(CFG_INIT_RAM_LOCK) && !defined(CONFIG_E500) +- unlock_ram_in_cache(); ++ /* ++ * Linux Kernel Parameters (passing board info data): ++ * r3: ptr to board info data ++ * r4: initrd_start or 0 if no initrd ++ * r5: initrd_end - unused if r4 is 0 ++ * r6: Start of command line string ++ * r7: End of command line string ++ */ ++#ifdef CONFIG_OF_FLAT_TREE ++ if (!of_flat_tree) /* no device tree; boot old style */ + #endif ++ (*kernel) (kbd, initrd_start, initrd_end, cmd_start, cmd_end); ++ /* does not return */ ++ ++#ifdef CONFIG_OF_FLAT_TREE + /* +- * Linux Kernel Parameters: ++ * Linux Kernel Parameters (passing device tree): + * r3: ptr to OF flat tree, followed by the board info data + * r4: physical pointer to the kernel itself + * r5: NULL + * r6: NULL + * r7: NULL + */ +- if (getenv("disable_of") != NULL) +- (*kernel) ((bd_t *)of_flat_tree, initrd_start, initrd_end, +- cmd_start, cmd_end); +- else { +- ft_setup(of_flat_tree, kbd, initrd_start, initrd_end); +- /* ft_dump_blob(of_flat_tree); */ +- (*kernel) ((bd_t *)of_flat_tree, (ulong)kernel, 0, 0, 0); +- } +-#endif /* CONFIG_OF_FLAT_TREE */ ++ ft_setup(of_flat_tree, kbd, initrd_start, initrd_end); ++ /* ft_dump_blob(of_flat_tree); */ ++ ++ (*kernel) ((bd_t *)of_flat_tree, (ulong)kernel, 0, 0, 0); ++#endif + } + #endif /* CONFIG_PPC */ + +diff -Naupr u-boot-1.1.6/common/cmd_elf.c u-boot-1.1.6-fsl-1/common/cmd_elf.c +--- u-boot-1.1.6/common/cmd_elf.c 2006-11-02 08:15:01.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/common/cmd_elf.c 2006-12-06 10:33:49.000000000 -0600 +@@ -79,7 +79,7 @@ int do_bootelf (cmd_tbl_t *cmdtp, int fl + * be either an ELF image or a raw binary. Will attempt to setup the + * bootline and other parameters correctly. + * ====================================================================== */ +-int do_bootvx ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) ++int do_bootvx (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) + { + unsigned long addr; /* Address of image */ + unsigned long bootaddr; /* Address to put the bootline */ +@@ -96,12 +96,10 @@ int do_bootvx ( cmd_tbl_t *cmdtp, int fl + * If we don't know where the image is then we're done. + */ + +- if ((tmp = getenv ("loadaddr")) != NULL) { +- addr = simple_strtoul (tmp, NULL, 16); +- } else { +- puts ("No load address provided\n"); +- return 1; +- } ++ if (argc < 2) ++ addr = load_addr; ++ else ++ addr = simple_strtoul (argv[1], NULL, 16); + + #if (CONFIG_COMMANDS & CFG_CMD_NET) + /* Check to see if we need to tftp the image ourselves before starting */ +diff -Naupr u-boot-1.1.6/common/cmd_fpga.c u-boot-1.1.6-fsl-1/common/cmd_fpga.c +--- u-boot-1.1.6/common/cmd_fpga.c 2006-11-02 08:15:01.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/common/cmd_fpga.c 2006-11-30 12:34:13.000000000 -0600 +@@ -55,6 +55,7 @@ static int fpga_get_op (char *opstr); + #define FPGA_LOAD 1 + #define FPGA_LOADB 2 + #define FPGA_DUMP 3 ++#define FPGA_LOADMK 4 + + /* Convert bitstream data and load into the fpga */ + int fpga_loadbitstream(unsigned long dev, char* fpgadata, size_t size) +@@ -251,6 +252,23 @@ int do_fpga (cmd_tbl_t * cmdtp, int flag + rc = fpga_loadbitstream(dev, fpga_data, data_size); + break; + ++ case FPGA_LOADMK: ++ { ++ image_header_t header; ++ image_header_t *hdr = &header; ++ ulong data; ++ ++ memmove (&header, (char *)fpga_data, sizeof(image_header_t)); ++ if (ntohl(hdr->ih_magic) != IH_MAGIC) { ++ puts ("Bad Magic Number\n"); ++ return 1; ++ } ++ data = ((ulong)fpga_data + sizeof(image_header_t)); ++ data_size = ntohl(hdr->ih_size); ++ rc = fpga_load (dev, (void *)data, data_size); ++ } ++ break; ++ + case FPGA_DUMP: + rc = fpga_dump (dev, fpga_data, data_size); + break; +@@ -282,6 +300,8 @@ static int fpga_get_op (char *opstr) + op = FPGA_LOADB; + } else if (!strcmp ("load", opstr)) { + op = FPGA_LOAD; ++ } else if (!strcmp ("loadmk", opstr)) { ++ op = FPGA_LOADMK; + } else if (!strcmp ("dump", opstr)) { + op = FPGA_DUMP; + } +@@ -299,5 +319,6 @@ U_BOOT_CMD (fpga, 6, 1, do_fpga, + "\tinfo\tlist known device information\n" + "\tload\tLoad device from memory buffer\n" + "\tloadb\tLoad device from bitstream buffer (Xilinx devices only)\n" ++ "\tloadmk\tLoad device generated with mkimage\n" + "\tdump\tLoad device to memory buffer\n"); + #endif /* CONFIG_FPGA && CONFIG_COMMANDS & CFG_CMD_FPGA */ +diff -Naupr u-boot-1.1.6/common/cmd_i2c.c u-boot-1.1.6-fsl-1/common/cmd_i2c.c +--- u-boot-1.1.6/common/cmd_i2c.c 2006-11-02 08:15:01.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/common/cmd_i2c.c 2006-11-30 12:34:13.000000000 -0600 +@@ -101,8 +101,31 @@ static uchar i2c_mm_last_chip; + static uint i2c_mm_last_addr; + static uint i2c_mm_last_alen; + ++/* If only one I2C bus is present, the list of devices to ignore when ++ * the probe command is issued is represented by a 1D array of addresses. ++ * When multiple buses are present, the list is an array of bus-address ++ * pairs. The following macros take care of this */ ++ + #if defined(CFG_I2C_NOPROBES) ++#if defined(CONFIG_I2C_MULTI_BUS) ++static struct ++{ ++ uchar bus; ++ uchar addr; ++} i2c_no_probes[] = CFG_I2C_NOPROBES; ++#define GET_BUS_NUM i2c_get_bus_num() ++#define COMPARE_BUS(b,i) (i2c_no_probes[(i)].bus == (b)) ++#define COMPARE_ADDR(a,i) (i2c_no_probes[(i)].addr == (a)) ++#define NO_PROBE_ADDR(i) i2c_no_probes[(i)].addr ++#else /* single bus */ + static uchar i2c_no_probes[] = CFG_I2C_NOPROBES; ++#define GET_BUS_NUM 0 ++#define COMPARE_BUS(b,i) ((b) == 0) /* Make compiler happy */ ++#define COMPARE_ADDR(a,i) (i2c_no_probes[(i)] == (a)) ++#define NO_PROBE_ADDR(i) i2c_no_probes[(i)] ++#endif /* CONFIG_MULTI_BUS */ ++ ++#define NUM_ELEMENTS_NOPROBE (sizeof(i2c_no_probes)/sizeof(i2c_no_probes[0])) + #endif + + static int +@@ -151,7 +174,7 @@ int do_i2c_md ( cmd_tbl_t *cmdtp, int fl + */ + addr = simple_strtoul(argv[2], NULL, 16); + alen = 1; +- for(j = 0; j < 8; j++) { ++ for (j = 0; j < 8; j++) { + if (argv[2][j] == '.') { + alen = argv[2][j+1] - '0'; + if (alen > 4) { +@@ -159,9 +182,8 @@ int do_i2c_md ( cmd_tbl_t *cmdtp, int fl + return 1; + } + break; +- } else if (argv[2][j] == '\0') { ++ } else if (argv[2][j] == '\0') + break; +- } + } + + /* +@@ -185,9 +207,9 @@ int do_i2c_md ( cmd_tbl_t *cmdtp, int fl + + linebytes = (nbytes > DISP_LINE_LEN) ? DISP_LINE_LEN : nbytes; + +- if(i2c_read(chip, addr, alen, linebuf, linebytes) != 0) { ++ if (i2c_read(chip, addr, alen, linebuf, linebytes) != 0) + puts ("Error reading the chip.\n"); +- } else { ++ else { + printf("%04x:", addr); + cp = linebuf; + for (j=0; j<linebytes; j++) { +@@ -256,17 +278,16 @@ int do_i2c_mw ( cmd_tbl_t *cmdtp, int fl + */ + addr = simple_strtoul(argv[2], NULL, 16); + alen = 1; +- for(j = 0; j < 8; j++) { ++ for (j = 0; j < 8; j++) { + if (argv[2][j] == '.') { + alen = argv[2][j+1] - '0'; +- if(alen > 4) { ++ if (alen > 4) { + printf ("Usage:\n%s\n", cmdtp->usage); + return 1; + } + break; +- } else if (argv[2][j] == '\0') { ++ } else if (argv[2][j] == '\0') + break; +- } + } + + /* +@@ -277,16 +298,14 @@ int do_i2c_mw ( cmd_tbl_t *cmdtp, int fl + /* + * Optional count + */ +- if(argc == 5) { ++ if (argc == 5) + count = simple_strtoul(argv[4], NULL, 16); +- } else { ++ else + count = 1; +- } + + while (count-- > 0) { +- if(i2c_write(chip, addr++, alen, &byte, 1) != 0) { ++ if (i2c_write(chip, addr++, alen, &byte, 1) != 0) + puts ("Error writing the chip.\n"); +- } + /* + * Wait for the write to complete. The write can take + * up to 10mSec (we allow a little more time). +@@ -303,9 +322,9 @@ int do_i2c_mw ( cmd_tbl_t *cmdtp, int fl + #endif + + #if 0 +- for(timeout = 0; timeout < 10; timeout++) { ++ for (timeout = 0; timeout < 10; timeout++) { + udelay(2000); +- if(i2c_probe(chip) == 0) ++ if (i2c_probe(chip) == 0) + break; + } + #endif +@@ -346,17 +365,16 @@ int do_i2c_crc (cmd_tbl_t *cmdtp, int fl + */ + addr = simple_strtoul(argv[2], NULL, 16); + alen = 1; +- for(j = 0; j < 8; j++) { ++ for (j = 0; j < 8; j++) { + if (argv[2][j] == '.') { + alen = argv[2][j+1] - '0'; +- if(alen > 4) { ++ if (alen > 4) { + printf ("Usage:\n%s\n", cmdtp->usage); + return 1; + } + break; +- } else if (argv[2][j] == '\0') { ++ } else if (argv[2][j] == '\0') + break; +- } + } + + /* +@@ -371,19 +389,16 @@ int do_i2c_crc (cmd_tbl_t *cmdtp, int fl + */ + crc = 0; + err = 0; +- while(count-- > 0) { +- if(i2c_read(chip, addr, alen, &byte, 1) != 0) { ++ while (count-- > 0) { ++ if (i2c_read(chip, addr, alen, &byte, 1) != 0) + err++; +- } + crc = crc32 (crc, &byte, 1); + addr++; + } +- if(err > 0) +- { ++ if (err > 0) + puts ("Error reading the chip,\n"); +- } else { ++ else + printf ("%08lx\n", crc); +- } + + return 0; + } +@@ -441,17 +456,16 @@ mod_i2c_mem(cmd_tbl_t *cmdtp, int incrfl + */ + addr = simple_strtoul(argv[2], NULL, 16); + alen = 1; +- for(j = 0; j < 8; j++) { ++ for (j = 0; j < 8; j++) { + if (argv[2][j] == '.') { + alen = argv[2][j+1] - '0'; +- if(alen > 4) { ++ if (alen > 4) { + printf ("Usage:\n%s\n", cmdtp->usage); + return 1; + } + break; +- } else if (argv[2][j] == '\0') { ++ } else if (argv[2][j] == '\0') + break; +- } + } + } + +@@ -461,17 +475,16 @@ mod_i2c_mem(cmd_tbl_t *cmdtp, int incrfl + */ + do { + printf("%08lx:", addr); +- if(i2c_read(chip, addr, alen, (uchar *)&data, size) != 0) { ++ if (i2c_read(chip, addr, alen, (uchar *)&data, size) != 0) + puts ("\nError reading the chip,\n"); +- } else { ++ else { + data = cpu_to_be32(data); +- if(size == 1) { ++ if (size == 1) + printf(" %02lx", (data >> 24) & 0x000000FF); +- } else if(size == 2) { ++ else if (size == 2) + printf(" %04lx", (data >> 16) & 0x0000FFFF); +- } else { ++ else + printf(" %08lx", data); +- } + } + + nbytes = readline (" ? "); +@@ -488,19 +501,17 @@ mod_i2c_mem(cmd_tbl_t *cmdtp, int incrfl + #endif + } + #ifdef CONFIG_BOOT_RETRY_TIME +- else if (nbytes == -2) { ++ else if (nbytes == -2) + break; /* timed out, exit the command */ +- } + #endif + else { + char *endp; + + data = simple_strtoul(console_buffer, &endp, 16); +- if(size == 1) { ++ if (size == 1) + data = data << 24; +- } else if(size == 2) { ++ else if (size == 2) + data = data << 16; +- } + data = be32_to_cpu(data); + nbytes = endp - console_buffer; + if (nbytes) { +@@ -510,9 +521,8 @@ mod_i2c_mem(cmd_tbl_t *cmdtp, int incrfl + */ + reset_cmd_timeout(); + #endif +- if(i2c_write(chip, addr, alen, (uchar *)&data, size) != 0) { ++ if (i2c_write(chip, addr, alen, (uchar *)&data, size) != 0) + puts ("Error writing the chip.\n"); +- } + #ifdef CFG_EEPROM_PAGE_WRITE_DELAY_MS + udelay(CFG_EEPROM_PAGE_WRITE_DELAY_MS * 1000); + #endif +@@ -538,14 +548,15 @@ int do_i2c_probe (cmd_tbl_t *cmdtp, int + int j; + #if defined(CFG_I2C_NOPROBES) + int k, skip; +-#endif ++ uchar bus = GET_BUS_NUM; ++#endif /* NOPROBES */ + + puts ("Valid chip addresses:"); +- for(j = 0; j < 128; j++) { ++ for (j = 0; j < 128; j++) { + #if defined(CFG_I2C_NOPROBES) + skip = 0; +- for (k = 0; k < sizeof(i2c_no_probes); k++){ +- if (j == i2c_no_probes[k]){ ++ for (k=0; k < NUM_ELEMENTS_NOPROBE; k++) { ++ if (COMPARE_BUS(bus, k) && COMPARE_ADDR(j, k)) { + skip = 1; + break; + } +@@ -553,16 +564,17 @@ int do_i2c_probe (cmd_tbl_t *cmdtp, int + if (skip) + continue; + #endif +- if(i2c_probe(j) == 0) { ++ if (i2c_probe(j) == 0) + printf(" %02X", j); +- } + } + putc ('\n'); + + #if defined(CFG_I2C_NOPROBES) + puts ("Excluded chip addresses:"); +- for( k = 0; k < sizeof(i2c_no_probes); k++ ) +- printf(" %02X", i2c_no_probes[k] ); ++ for (k=0; k < NUM_ELEMENTS_NOPROBE; k++) { ++ if (COMPARE_BUS(bus,k)) ++ printf(" %02X", NO_PROBE_ADDR(k)); ++ } + putc ('\n'); + #endif + +@@ -601,7 +613,7 @@ int do_i2c_loop(cmd_tbl_t *cmdtp, int fl + */ + addr = simple_strtoul(argv[2], NULL, 16); + alen = 1; +- for(j = 0; j < 8; j++) { ++ for (j = 0; j < 8; j++) { + if (argv[2][j] == '.') { + alen = argv[2][j+1] - '0'; + if (alen > 4) { +@@ -609,9 +621,8 @@ int do_i2c_loop(cmd_tbl_t *cmdtp, int fl + return 1; + } + break; +- } else if (argv[2][j] == '\0') { ++ } else if (argv[2][j] == '\0') + break; +- } + } + + /* +@@ -619,24 +630,21 @@ int do_i2c_loop(cmd_tbl_t *cmdtp, int fl + */ + length = 1; + length = simple_strtoul(argv[3], NULL, 16); +- if(length > sizeof(bytes)) { ++ if (length > sizeof(bytes)) + length = sizeof(bytes); +- } + + /* + * The delay time (uSec) is optional. + */ + delay = 1000; +- if (argc > 3) { ++ if (argc > 3) + delay = simple_strtoul(argv[4], NULL, 10); +- } + /* + * Run the loop... + */ +- while(1) { +- if(i2c_read(chip, addr, alen, bytes, length) != 0) { ++ while (1) { ++ if (i2c_read(chip, addr, alen, bytes, length) != 0) + puts ("Error reading the chip.\n"); +- } + udelay(delay); + } + +@@ -671,7 +679,7 @@ int do_sdram ( cmd_tbl_t *cmdtp, int fl + */ + chip = simple_strtoul(argv[1], NULL, 16); + +- if(i2c_read(chip, 0, 1, data, sizeof(data)) != 0) { ++ if (i2c_read(chip, 0, 1, data, sizeof(data)) != 0) { + puts ("No SDRAM Serial Presence Detect found.\n"); + return 1; + } +@@ -680,7 +688,7 @@ int do_sdram ( cmd_tbl_t *cmdtp, int fl + for (j = 0; j < 63; j++) { + cksum += data[j]; + } +- if(cksum != data[63]) { ++ if (cksum != data[63]) { + printf ("WARNING: Configuration data checksum failure:\n" + " is 0x%02x, calculated 0x%02x\n", + data[63], cksum); +@@ -696,17 +704,15 @@ int do_sdram ( cmd_tbl_t *cmdtp, int fl + default: puts ("unknown\n"); break; + } + puts ("Row address bits "); +- if((data[3] & 0x00F0) == 0) { ++ if ((data[3] & 0x00F0) == 0) + printf("%d\n", data[3] & 0x0F); +- } else { ++ else + printf("%d/%d\n", data[3] & 0x0F, (data[3] >> 4) & 0x0F); +- } + puts ("Column address bits "); +- if((data[4] & 0x00F0) == 0) { ++ if ((data[4] & 0x00F0) == 0) + printf("%d\n", data[4] & 0x0F); +- } else { ++ else + printf("%d/%d\n", data[4] & 0x0F, (data[4] >> 4) & 0x0F); +- } + printf("Module rows %d\n", data[5]); + printf("Module data width %d bits\n", (data[7] << 8) | data[6]); + puts ("Interface signal levels "); +@@ -729,11 +735,10 @@ int do_sdram ( cmd_tbl_t *cmdtp, int fl + case 2: puts ("ECC\n"); break; + default: puts ("unknown\n"); break; + } +- if((data[12] & 0x80) == 0) { ++ if ((data[12] & 0x80) == 0) + puts ("No self refresh, rate "); +- } else { ++ else + puts ("Self refresh, rate "); +- } + switch(data[12] & 0x7F) { + case 0: puts ("15.625uS\n"); break; + case 1: puts ("3.9uS\n"); break; +@@ -744,17 +749,16 @@ int do_sdram ( cmd_tbl_t *cmdtp, int fl + default: puts ("unknown\n"); break; + } + printf("SDRAM width (primary) %d\n", data[13] & 0x7F); +- if((data[13] & 0x80) != 0) { ++ if ((data[13] & 0x80) != 0) { + printf(" (second bank) %d\n", + 2 * (data[13] & 0x7F)); + } +- if(data[14] != 0) { ++ if (data[14] != 0) { + printf("EDC width %d\n", + data[14] & 0x7F); +- if((data[14] & 0x80) != 0) { ++ if ((data[14] & 0x80) != 0) + printf(" (second bank) %d\n", + 2 * (data[14] & 0x7F)); +- } + } + printf("Min clock delay, back-to-back random column addresses %d\n", + data[15]); +@@ -852,18 +856,18 @@ int do_sdram ( cmd_tbl_t *cmdtp, int fl + (data[35] & 0x80) ? '-' : '+', + (data[35] >> 4) & 0x07, data[35] & 0x0F); + puts ("Manufacturer's JEDEC ID "); +- for(j = 64; j <= 71; j++) ++ for (j = 64; j <= 71; j++) + printf("%02X ", data[j]); + putc ('\n'); + printf("Manufacturing Location %02X\n", data[72]); + puts ("Manufacturer's Part Number "); +- for(j = 73; j <= 90; j++) ++ for (j = 73; j <= 90; j++) + printf("%02X ", data[j]); + putc ('\n'); + printf("Revision Code %02X %02X\n", data[91], data[92]); + printf("Manufacturing Date %02X %02X\n", data[93], data[94]); + puts ("Assembly Serial Number "); +- for(j = 95; j <= 98; j++) ++ for (j = 95; j <= 98; j++) + printf("%02X ", data[j]); + putc ('\n'); + printf("Speed rating PC%d\n", +@@ -873,6 +877,74 @@ int do_sdram ( cmd_tbl_t *cmdtp, int fl + } + #endif /* CFG_CMD_SDRAM */ + ++#if defined(CONFIG_I2C_CMD_TREE) ++#if defined(CONFIG_I2C_MULTI_BUS) ++int do_i2c_bus_num(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) ++{ ++ int bus_idx, ret=0; ++ ++ if (argc == 1) ++ /* querying current setting */ ++ printf("Current bus is %d\n", i2c_get_bus_num()); ++ else { ++ bus_idx = simple_strtoul(argv[1], NULL, 10); ++ printf("Setting bus to %d\n", bus_idx); ++ ret = i2c_set_bus_num(bus_idx); ++ if (ret) ++ printf("Failure changing bus number (%d)\n", ret); ++ } ++ return ret; ++} ++#endif /* CONFIG_I2C_MULTI_BUS */ ++ ++int do_i2c_bus_speed(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) ++{ ++ int speed, ret=0; ++ ++ if (argc == 1) ++ /* querying current speed */ ++ printf("Current bus speed=%d\n", i2c_get_bus_speed()); ++ else { ++ speed = simple_strtoul(argv[1], NULL, 10); ++ printf("Setting bus speed to %d Hz\n", speed); ++ ret = i2c_set_bus_speed(speed); ++ if (ret) ++ printf("Failure changing bus speed (%d)\n", ret); ++ } ++ return ret; ++} ++ ++int do_i2c(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) ++{ ++#if defined(CONFIG_I2C_MULTI_BUS) ++ if (!strncmp(argv[1], "de", 2)) ++ return do_i2c_bus_num(cmdtp, flag, --argc, ++argv); ++#endif /* CONFIG_I2C_MULTI_BUS */ ++ if (!strncmp(argv[1], "sp", 2)) ++ return do_i2c_bus_speed(cmdtp, flag, --argc, ++argv); ++ if (!strncmp(argv[1], "md", 2)) ++ return do_i2c_md(cmdtp, flag, --argc, ++argv); ++ if (!strncmp(argv[1], "mm", 2)) ++ return do_i2c_mm(cmdtp, flag, --argc, ++argv); ++ if (!strncmp(argv[1], "mw", 2)) ++ return do_i2c_mw(cmdtp, flag, --argc, ++argv); ++ if (!strncmp(argv[1], "nm", 2)) ++ return do_i2c_nm(cmdtp, flag, --argc, ++argv); ++ if (!strncmp(argv[1], "cr", 2)) ++ return do_i2c_crc(cmdtp, flag, --argc, ++argv); ++ if (!strncmp(argv[1], "pr", 2)) ++ return do_i2c_probe(cmdtp, flag, --argc, ++argv); ++ if (!strncmp(argv[1], "lo", 2)) ++ return do_i2c_loop(cmdtp, flag, --argc, ++argv); ++#if (CONFIG_COMMANDS & CFG_CMD_SDRAM) ++ if (!strncmp(argv[1], "sd", 2)) ++ return do_sdram(cmdtp, flag, --argc, ++argv); ++#endif /* CFG_CMD_SDRAM */ ++ else ++ printf ("Usage:\n%s\n", cmdtp->usage); ++ return 0; ++} ++#endif /* CONFIG_I2C_CMD_TREE */ + + /***************************************************/ + +@@ -930,4 +1002,26 @@ U_BOOT_CMD( + " (valid chip values 50..57)\n" + ); + #endif ++ ++#if defined(CONFIG_I2C_CMD_TREE) ++U_BOOT_CMD( ++ i2c, 6, 1, do_i2c, ++ "i2c - I2C sub-system\n", ++#if defined(CONFIG_I2C_MULTI_BUS) ++ "dev [dev] - show or set current I2C bus\n" ++#endif /* CONFIG_I2C_MULTI_BUS */ ++ "i2c speed [speed] - show or set I2C bus speed\n" ++ "i2c md chip address[.0, .1, .2] [# of objects] - read from I2C device\n" ++ "i2c mm chip address[.0, .1, .2] - write to I2C device (auto-incrementing)\n" ++ "i2c mw chip address[.0, .1, .2] value [count] - write to I2C device (fill)\n" ++ "i2c nm chip address[.0, .1, .2] - write to I2C device (constant address)\n" ++ "i2c crc32 chip address[.0, .1, .2] count - compute CRC32 checksum\n" ++ "i2c probe - show devices on the I2C bus\n" ++ "i2c loop chip address[.0, .1, .2] [# of objects] - looping read of device\n" ++#if (CONFIG_COMMANDS & CFG_CMD_SDRAM) ++ "i2c sdram chip - print SDRAM configuration information\n" ++#endif /* CFG_CMD_SDRAM */ ++); ++#endif /* CONFIG_I2C_CMD_TREE */ ++ + #endif /* CFG_CMD_I2C */ +diff -Naupr u-boot-1.1.6/common/cmd_nand.c u-boot-1.1.6-fsl-1/common/cmd_nand.c +--- u-boot-1.1.6/common/cmd_nand.c 2006-11-02 08:15:01.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/common/cmd_nand.c 2006-12-06 10:33:49.000000000 -0600 +@@ -684,178 +684,182 @@ extern int nand_write_oob(struct nand_ch + size_t len, size_t *retlen, const u_char *buf); + + +-int do_nand (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) ++int do_nand (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) + { +- int rcode = 0; ++ int rcode = 0; + +- switch (argc) { +- case 0: +- case 1: +- printf ("Usage:\n%s\n", cmdtp->usage); +- return 1; +- case 2: +- if (strcmp(argv[1],"info") == 0) { +- int i; +- +- putc ('\n'); +- +- for (i=0; i<CFG_MAX_NAND_DEVICE; ++i) { +- if(nand_dev_desc[i].ChipID == NAND_ChipID_UNKNOWN) +- continue; /* list only known devices */ +- printf ("Device %d: ", i); +- nand_print(&nand_dev_desc[i]); +- } +- return 0; ++ switch (argc) { ++ case 0: ++ case 1: ++ printf ("Usage:\n%s\n", cmdtp->usage); ++ return 1; ++ case 2: ++ if (strcmp (argv[1], "info") == 0) { ++ int i; + +- } else if (strcmp(argv[1],"device") == 0) { +- if ((curr_device < 0) || (curr_device >= CFG_MAX_NAND_DEVICE)) { +- puts ("\nno devices available\n"); +- return 1; +- } +- printf ("\nDevice %d: ", curr_device); +- nand_print(&nand_dev_desc[curr_device]); +- return 0; +- +- } else if (strcmp(argv[1],"bad") == 0) { +- if ((curr_device < 0) || (curr_device >= CFG_MAX_NAND_DEVICE)) { +- puts ("\nno devices available\n"); +- return 1; +- } +- printf ("\nDevice %d bad blocks:\n", curr_device); +- nand_print_bad(&nand_dev_desc[curr_device]); +- return 0; ++ putc ('\n'); + +- } +- printf ("Usage:\n%s\n", cmdtp->usage); +- return 1; +- case 3: +- if (strcmp(argv[1],"device") == 0) { +- int dev = (int)simple_strtoul(argv[2], NULL, 10); +- +- printf ("\nDevice %d: ", dev); +- if (dev >= CFG_MAX_NAND_DEVICE) { +- puts ("unknown device\n"); +- return 1; +- } +- nand_print(&nand_dev_desc[dev]); +- /*nand_print (dev);*/ ++ for (i = 0; i < CFG_MAX_NAND_DEVICE; ++i) { ++ if (nand_dev_desc[i].ChipID == ++ NAND_ChipID_UNKNOWN) ++ continue; /* list only known devices */ ++ printf ("Device %d: ", i); ++ nand_print (&nand_dev_desc[i]); ++ } ++ return 0; ++ ++ } else if (strcmp (argv[1], "device") == 0) { ++ if ((curr_device < 0) ++ || (curr_device >= CFG_MAX_NAND_DEVICE)) { ++ puts ("\nno devices available\n"); ++ return 1; ++ } ++ printf ("\nDevice %d: ", curr_device); ++ nand_print (&nand_dev_desc[curr_device]); ++ return 0; ++ ++ } else if (strcmp (argv[1], "bad") == 0) { ++ if ((curr_device < 0) ++ || (curr_device >= CFG_MAX_NAND_DEVICE)) { ++ puts ("\nno devices available\n"); ++ return 1; ++ } ++ printf ("\nDevice %d bad blocks:\n", curr_device); ++ nand_print_bad (&nand_dev_desc[curr_device]); ++ return 0; + +- if (nand_dev_desc[dev].ChipID == NAND_ChipID_UNKNOWN) { +- return 1; + } ++ printf ("Usage:\n%s\n", cmdtp->usage); ++ return 1; ++ case 3: ++ if (strcmp (argv[1], "device") == 0) { ++ int dev = (int) simple_strtoul (argv[2], NULL, 10); + +- curr_device = dev; ++ printf ("\nDevice %d: ", dev); ++ if (dev >= CFG_MAX_NAND_DEVICE) { ++ puts ("unknown device\n"); ++ return 1; ++ } ++ nand_print (&nand_dev_desc[dev]); ++ /*nand_print (dev); */ + +- puts ("... is now current device\n"); ++ if (nand_dev_desc[dev].ChipID == NAND_ChipID_UNKNOWN) { ++ return 1; ++ } + +- return 0; +- } +- else if (strcmp(argv[1],"erase") == 0 && strcmp(argv[2], "clean") == 0) { +- struct nand_chip* nand = &nand_dev_desc[curr_device]; +- ulong off = 0; +- ulong size = nand->totlen; +- int ret; ++ curr_device = dev; + +- printf ("\nNAND erase: device %d offset %ld, size %ld ... ", +- curr_device, off, size); ++ puts ("... is now current device\n"); + +- ret = nand_legacy_erase (nand, off, size, 1); ++ return 0; ++ } else if (strcmp (argv[1], "erase") == 0 ++ && strcmp (argv[2], "clean") == 0) { ++ struct nand_chip *nand = &nand_dev_desc[curr_device]; ++ ulong off = 0; ++ ulong size = nand->totlen; ++ int ret; + +- printf("%s\n", ret ? "ERROR" : "OK"); ++ printf ("\nNAND erase: device %d offset %ld, size %ld ... ", curr_device, off, size); + +- return ret; +- } ++ ret = nand_legacy_erase (nand, off, size, 1); + +- printf ("Usage:\n%s\n", cmdtp->usage); +- return 1; +- default: +- /* at least 4 args */ +- +- if (strncmp(argv[1], "read", 4) == 0 || +- strncmp(argv[1], "write", 5) == 0) { +- ulong addr = simple_strtoul(argv[2], NULL, 16); +- ulong off = simple_strtoul(argv[3], NULL, 16); +- ulong size = simple_strtoul(argv[4], NULL, 16); +- int cmd = (strncmp(argv[1], "read", 4) == 0) ? +- NANDRW_READ : NANDRW_WRITE; +- int ret, total; +- char* cmdtail = strchr(argv[1], '.'); ++ printf ("%s\n", ret ? "ERROR" : "OK"); + +- if (cmdtail && !strncmp(cmdtail, ".oob", 2)) { +- /* read out-of-band data */ +- if (cmd & NANDRW_READ) { +- ret = nand_read_oob(nand_dev_desc + curr_device, +- off, size, (size_t *)&total, +- (u_char*)addr); +- } +- else { +- ret = nand_write_oob(nand_dev_desc + curr_device, +- off, size, (size_t *)&total, +- (u_char*)addr); +- } + return ret; + } +- else if (cmdtail && !strncmp(cmdtail, ".jffs2", 2)) +- cmd |= NANDRW_JFFS2; /* skip bad blocks */ +- else if (cmdtail && !strncmp(cmdtail, ".jffs2s", 2)) { +- cmd |= NANDRW_JFFS2; /* skip bad blocks (on read too) */ +- if (cmd & NANDRW_READ) +- cmd |= NANDRW_JFFS2_SKIP; /* skip bad blocks (on read too) */ +- } ++ ++ printf ("Usage:\n%s\n", cmdtp->usage); ++ return 1; ++ default: ++ /* at least 4 args */ ++ ++ if (strncmp (argv[1], "read", 4) == 0 || ++ strncmp (argv[1], "write", 5) == 0) { ++ ulong addr = simple_strtoul (argv[2], NULL, 16); ++ ulong off = simple_strtoul (argv[3], NULL, 16); ++ ulong size = simple_strtoul (argv[4], NULL, 16); ++ int cmd = (strncmp (argv[1], "read", 4) == 0) ? ++ NANDRW_READ : NANDRW_WRITE; ++ int ret, total; ++ char *cmdtail = strchr (argv[1], '.'); ++ ++ if (cmdtail && !strncmp (cmdtail, ".oob", 2)) { ++ /* read out-of-band data */ ++ if (cmd & NANDRW_READ) { ++ ret = nand_read_oob (nand_dev_desc + curr_device, ++ off, size, (size_t *) & total, ++ (u_char *) addr); ++ } else { ++ ret = nand_write_oob (nand_dev_desc + curr_device, ++ off, size, (size_t *) & total, ++ (u_char *) addr); ++ } ++ return ret; ++ } else if (cmdtail && !strncmp (cmdtail, ".jffs2", 2)) ++ cmd |= NANDRW_JFFS2; /* skip bad blocks */ ++ else if (cmdtail && !strncmp (cmdtail, ".jffs2s", 2)) { ++ cmd |= NANDRW_JFFS2; /* skip bad blocks (on read too) */ ++ if (cmd & NANDRW_READ) ++ cmd |= NANDRW_JFFS2_SKIP; /* skip bad blocks (on read too) */ ++ } + #ifdef SXNI855T +- /* need ".e" same as ".j" for compatibility with older units */ +- else if (cmdtail && !strcmp(cmdtail, ".e")) +- cmd |= NANDRW_JFFS2; /* skip bad blocks */ ++ /* need ".e" same as ".j" for compatibility with older units */ ++ else if (cmdtail && !strcmp (cmdtail, ".e")) ++ cmd |= NANDRW_JFFS2; /* skip bad blocks */ + #endif + #ifdef CFG_NAND_SKIP_BAD_DOT_I +- /* need ".i" same as ".jffs2s" for compatibility with older units (esd) */ +- /* ".i" for image -> read skips bad block (no 0xff) */ +- else if (cmdtail && !strcmp(cmdtail, ".i")) { +- cmd |= NANDRW_JFFS2; /* skip bad blocks (on read too) */ +- if (cmd & NANDRW_READ) +- cmd |= NANDRW_JFFS2_SKIP; /* skip bad blocks (on read too) */ +- } ++ /* need ".i" same as ".jffs2s" for compatibility with older units (esd) */ ++ /* ".i" for image -> read skips bad block (no 0xff) */ ++ else if (cmdtail && !strcmp (cmdtail, ".i")) { ++ cmd |= NANDRW_JFFS2; /* skip bad blocks (on read too) */ ++ if (cmd & NANDRW_READ) ++ cmd |= NANDRW_JFFS2_SKIP; /* skip bad blocks (on read too) */ ++ } + #endif /* CFG_NAND_SKIP_BAD_DOT_I */ +- else if (cmdtail) { +- printf ("Usage:\n%s\n", cmdtp->usage); +- return 1; +- } ++ else if (cmdtail) { ++ printf ("Usage:\n%s\n", cmdtp->usage); ++ return 1; ++ } + +- printf ("\nNAND %s: device %d offset %ld, size %ld ...\n", +- (cmd & NANDRW_READ) ? "read" : "write", +- curr_device, off, size); +- +- ret = nand_legacy_rw(nand_dev_desc + curr_device, cmd, off, size, +- (size_t *)&total, (u_char*)addr); +- +- printf (" %d bytes %s: %s\n", total, +- (cmd & NANDRW_READ) ? "read" : "written", +- ret ? "ERROR" : "OK"); +- +- return ret; +- } else if (strcmp(argv[1],"erase") == 0 && +- (argc == 4 || strcmp("clean", argv[2]) == 0)) { +- int clean = argc == 5; +- ulong off = simple_strtoul(argv[2 + clean], NULL, 16); +- ulong size = simple_strtoul(argv[3 + clean], NULL, 16); +- int ret; +- +- printf ("\nNAND erase: device %d offset %ld, size %ld ...\n", +- curr_device, off, size); ++ printf ("\nNAND %s: device %d offset %ld, size %ld ...\n", ++ (cmd & NANDRW_READ) ? "read" : "write", ++ curr_device, off, size); ++ ++ ret = nand_legacy_rw (nand_dev_desc + curr_device, ++ cmd, off, size, ++ (size_t *) & total, ++ (u_char *) addr); ++ ++ printf (" %d bytes %s: %s\n", total, ++ (cmd & NANDRW_READ) ? "read" : "written", ++ ret ? "ERROR" : "OK"); + +- ret = nand_legacy_erase (nand_dev_desc + curr_device, +- off, size, clean); ++ return ret; ++ } else if (strcmp (argv[1], "erase") == 0 && ++ (argc == 4 || strcmp ("clean", argv[2]) == 0)) { ++ int clean = argc == 5; ++ ulong off = ++ simple_strtoul (argv[2 + clean], NULL, 16); ++ ulong size = ++ simple_strtoul (argv[3 + clean], NULL, 16); ++ int ret; + +- printf("%s\n", ret ? "ERROR" : "OK"); ++ printf ("\nNAND erase: device %d offset %ld, size %ld ...\n", ++ curr_device, off, size); + +- return ret; +- } else { +- printf ("Usage:\n%s\n", cmdtp->usage); +- rcode = 1; +- } ++ ret = nand_legacy_erase (nand_dev_desc + curr_device, ++ off, size, clean); + +- return rcode; +- } ++ printf ("%s\n", ret ? "ERROR" : "OK"); ++ ++ return ret; ++ } else { ++ printf ("Usage:\n%s\n", cmdtp->usage); ++ rcode = 1; ++ } ++ ++ return rcode; ++ } + } + + U_BOOT_CMD( +diff -Naupr u-boot-1.1.6/common/cyclon2.c u-boot-1.1.6-fsl-1/common/cyclon2.c +--- u-boot-1.1.6/common/cyclon2.c 1969-12-31 18:00:00.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/common/cyclon2.c 2006-11-30 12:34:13.000000000 -0600 +@@ -0,0 +1,305 @@ ++/* ++ * (C) Copyright 2006 ++ * Heiko Schocher, hs@denx.de ++ * Based on ACE1XK.c ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ * ++ */ ++ ++#include <common.h> /* core U-Boot definitions */ ++#include <altera.h> ++#include <ACEX1K.h> /* ACEX device family */ ++ ++#if (CONFIG_FPGA & (CFG_ALTERA | CFG_CYCLON2)) ++ ++/* Define FPGA_DEBUG to get debug printf's */ ++#ifdef FPGA_DEBUG ++#define PRINTF(fmt,args...) printf (fmt ,##args) ++#else ++#define PRINTF(fmt,args...) ++#endif ++ ++/* Note: The assumption is that we cannot possibly run fast enough to ++ * overrun the device (the Slave Parallel mode can free run at 50MHz). ++ * If there is a need to operate slower, define CONFIG_FPGA_DELAY in ++ * the board config file to slow things down. ++ */ ++#ifndef CONFIG_FPGA_DELAY ++#define CONFIG_FPGA_DELAY() ++#endif ++ ++#ifndef CFG_FPGA_WAIT ++#define CFG_FPGA_WAIT CFG_HZ/10 /* 100 ms */ ++#endif ++ ++static int CYC2_ps_load( Altera_desc *desc, void *buf, size_t bsize ); ++static int CYC2_ps_dump( Altera_desc *desc, void *buf, size_t bsize ); ++/* static int CYC2_ps_info( Altera_desc *desc ); */ ++static int CYC2_ps_reloc( Altera_desc *desc, ulong reloc_offset ); ++ ++/* ------------------------------------------------------------------------- */ ++/* CYCLON2 Generic Implementation */ ++int CYC2_load (Altera_desc * desc, void *buf, size_t bsize) ++{ ++ int ret_val = FPGA_FAIL; ++ ++ switch (desc->iface) { ++ case passive_serial: ++ PRINTF ("%s: Launching Passive Serial Loader\n", __FUNCTION__); ++ ret_val = CYC2_ps_load (desc, buf, bsize); ++ break; ++ ++ /* Add new interface types here */ ++ ++ default: ++ printf ("%s: Unsupported interface type, %d\n", ++ __FUNCTION__, desc->iface); ++ } ++ ++ return ret_val; ++} ++ ++int CYC2_dump (Altera_desc * desc, void *buf, size_t bsize) ++{ ++ int ret_val = FPGA_FAIL; ++ ++ switch (desc->iface) { ++ case passive_serial: ++ PRINTF ("%s: Launching Passive Serial Dump\n", __FUNCTION__); ++ ret_val = CYC2_ps_dump (desc, buf, bsize); ++ break; ++ ++ /* Add new interface types here */ ++ ++ default: ++ printf ("%s: Unsupported interface type, %d\n", ++ __FUNCTION__, desc->iface); ++ } ++ ++ return ret_val; ++} ++ ++int CYC2_info( Altera_desc *desc ) ++{ ++ return FPGA_SUCCESS; ++} ++ ++int CYC2_reloc (Altera_desc * desc, ulong reloc_offset) ++{ ++ int ret_val = FPGA_FAIL; /* assume a failure */ ++ ++ if (desc->family != Altera_CYC2) { ++ printf ("%s: Unsupported family type, %d\n", ++ __FUNCTION__, desc->family); ++ return FPGA_FAIL; ++ } else ++ switch (desc->iface) { ++ case passive_serial: ++ ret_val = CYC2_ps_reloc (desc, reloc_offset); ++ break; ++ ++ /* Add new interface types here */ ++ ++ default: ++ printf ("%s: Unsupported interface type, %d\n", ++ __FUNCTION__, desc->iface); ++ } ++ ++ return ret_val; ++} ++ ++/* ------------------------------------------------------------------------- */ ++/* CYCLON2 Passive Serial Generic Implementation */ ++static int CYC2_ps_load (Altera_desc * desc, void *buf, size_t bsize) ++{ ++ int ret_val = FPGA_FAIL; /* assume the worst */ ++ Altera_CYC2_Passive_Serial_fns *fn = desc->iface_fns; ++ int ret = 0; ++ ++ PRINTF ("%s: start with interface functions @ 0x%p\n", ++ __FUNCTION__, fn); ++ ++ if (fn) { ++ int cookie = desc->cookie; /* make a local copy */ ++ unsigned long ts; /* timestamp */ ++ ++ PRINTF ("%s: Function Table:\n" ++ "ptr:\t0x%p\n" ++ "struct: 0x%p\n" ++ "config:\t0x%p\n" ++ "status:\t0x%p\n" ++ "write:\t0x%p\n" ++ "done:\t0x%p\n\n", ++ __FUNCTION__, &fn, fn, fn->config, fn->status, ++ fn->write, fn->done); ++#ifdef CFG_FPGA_PROG_FEEDBACK ++ printf ("Loading FPGA Device %d...", cookie); ++#endif ++ ++ /* ++ * Run the pre configuration function if there is one. ++ */ ++ if (*fn->pre) { ++ (*fn->pre) (cookie); ++ } ++ ++ /* Establish the initial state */ ++ (*fn->config) (TRUE, TRUE, cookie); /* Assert nCONFIG */ ++ ++ udelay(2); /* T_cfg > 2us */ ++ ++ /* Wait for nSTATUS to be asserted */ ++ ts = get_timer (0); /* get current time */ ++ do { ++ CONFIG_FPGA_DELAY (); ++ if (get_timer (ts) > CFG_FPGA_WAIT) { /* check the time */ ++ puts ("** Timeout waiting for STATUS to go high.\n"); ++ (*fn->abort) (cookie); ++ return FPGA_FAIL; ++ } ++ } while (!(*fn->status) (cookie)); ++ ++ /* Get ready for the burn */ ++ CONFIG_FPGA_DELAY (); ++ ++ ret = (*fn->write) (buf, bsize, TRUE, cookie); ++ if (ret) { ++ puts ("** Write failed.\n"); ++ (*fn->abort) (cookie); ++ return FPGA_FAIL; ++ } ++#ifdef CFG_FPGA_PROG_FEEDBACK ++ puts(" OK? ..."); ++#endif ++ ++ CONFIG_FPGA_DELAY (); ++ ++#ifdef CFG_FPGA_PROG_FEEDBACK ++ putc (' '); /* terminate the dotted line */ ++#endif ++ ++ /* ++ * Checking FPGA's CONF_DONE signal - correctly booted ? ++ */ ++ ++ if ( ! (*fn->done) (cookie) ) { ++ puts ("** Booting failed! CONF_DONE is still deasserted.\n"); ++ (*fn->abort) (cookie); ++ return (FPGA_FAIL); ++ } ++#ifdef CFG_FPGA_PROG_FEEDBACK ++ puts(" OK\n"); ++#endif ++ ++ ret_val = FPGA_SUCCESS; ++ ++#ifdef CFG_FPGA_PROG_FEEDBACK ++ if (ret_val == FPGA_SUCCESS) { ++ puts ("Done.\n"); ++ } ++ else { ++ puts ("Fail.\n"); ++ } ++#endif ++ (*fn->post) (cookie); ++ ++ } else { ++ printf ("%s: NULL Interface function table!\n", __FUNCTION__); ++ } ++ ++ return ret_val; ++} ++ ++static int CYC2_ps_dump (Altera_desc * desc, void *buf, size_t bsize) ++{ ++ /* Readback is only available through the Slave Parallel and */ ++ /* boundary-scan interfaces. */ ++ printf ("%s: Passive Serial Dumping is unavailable\n", ++ __FUNCTION__); ++ return FPGA_FAIL; ++} ++ ++static int CYC2_ps_reloc (Altera_desc * desc, ulong reloc_offset) ++{ ++ int ret_val = FPGA_FAIL; /* assume the worst */ ++ Altera_CYC2_Passive_Serial_fns *fn_r, *fn = ++ (Altera_CYC2_Passive_Serial_fns *) (desc->iface_fns); ++ ++ if (fn) { ++ ulong addr; ++ ++ /* Get the relocated table address */ ++ addr = (ulong) fn + reloc_offset; ++ fn_r = (Altera_CYC2_Passive_Serial_fns *) addr; ++ ++ if (!fn_r->relocated) { ++ ++ if (memcmp (fn_r, fn, ++ sizeof (Altera_CYC2_Passive_Serial_fns)) ++ == 0) { ++ /* good copy of the table, fix the descriptor pointer */ ++ desc->iface_fns = fn_r; ++ } else { ++ PRINTF ("%s: Invalid function table at 0x%p\n", ++ __FUNCTION__, fn_r); ++ return FPGA_FAIL; ++ } ++ ++ PRINTF ("%s: Relocating descriptor at 0x%p\n", __FUNCTION__, ++ desc); ++ ++ addr = (ulong) (fn->pre) + reloc_offset; ++ fn_r->pre = (Altera_pre_fn) addr; ++ ++ addr = (ulong) (fn->config) + reloc_offset; ++ fn_r->config = (Altera_config_fn) addr; ++ ++ addr = (ulong) (fn->status) + reloc_offset; ++ fn_r->status = (Altera_status_fn) addr; ++ ++ addr = (ulong) (fn->done) + reloc_offset; ++ fn_r->done = (Altera_done_fn) addr; ++ ++ addr = (ulong) (fn->write) + reloc_offset; ++ fn_r->write = (Altera_write_fn) addr; ++ ++ addr = (ulong) (fn->abort) + reloc_offset; ++ fn_r->abort = (Altera_abort_fn) addr; ++ ++ addr = (ulong) (fn->post) + reloc_offset; ++ fn_r->post = (Altera_post_fn) addr; ++ ++ fn_r->relocated = TRUE; ++ ++ } else { ++ /* this table has already been moved */ ++ /* XXX - should check to see if the descriptor is correct */ ++ desc->iface_fns = fn_r; ++ } ++ ++ ret_val = FPGA_SUCCESS; ++ } else { ++ printf ("%s: NULL Interface function table!\n", __FUNCTION__); ++ } ++ ++ return ret_val; ++} ++ ++#endif /* (CONFIG_FPGA & (CFG_ALTERA | CFG_CYCLON2)) */ +diff -Naupr u-boot-1.1.6/common/fpga.c u-boot-1.1.6-fsl-1/common/fpga.c +--- u-boot-1.1.6/common/fpga.c 2006-11-02 08:15:01.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/common/fpga.c 2006-11-30 12:34:13.000000000 -0600 +@@ -139,7 +139,7 @@ static int fpga_dev_info( int devnum ) + printf( "Xilinx Device\nDescriptor @ 0x%p\n", desc ); + ret_val = xilinx_info( desc->devdesc ); + #else +- fpga_no_sup( __FUNCTION__, "Xilinx devices" ); ++ fpga_no_sup( (char *)__FUNCTION__, "Xilinx devices" ); + #endif + break; + case fpga_altera: +@@ -178,7 +178,7 @@ int fpga_reloc( fpga_type devtype, void + #if CONFIG_FPGA & CFG_FPGA_XILINX + ret_val = xilinx_reloc( desc, reloc_off ); + #else +- fpga_no_sup( __FUNCTION__, "Xilinx devices" ); ++ fpga_no_sup( (char *)__FUNCTION__, "Xilinx devices" ); + #endif + break; + case fpga_altera: +@@ -271,7 +271,7 @@ int fpga_load( int devnum, void *buf, si + #if CONFIG_FPGA & CFG_FPGA_XILINX + ret_val = xilinx_load( desc->devdesc, buf, bsize ); + #else +- fpga_no_sup( __FUNCTION__, "Xilinx devices" ); ++ fpga_no_sup( (char *)__FUNCTION__, "Xilinx devices" ); + #endif + break; + case fpga_altera: +@@ -304,7 +304,7 @@ int fpga_dump( int devnum, void *buf, si + #if CONFIG_FPGA & CFG_FPGA_XILINX + ret_val = xilinx_dump( desc->devdesc, buf, bsize ); + #else +- fpga_no_sup( __FUNCTION__, "Xilinx devices" ); ++ fpga_no_sup( (char *)__FUNCTION__, "Xilinx devices" ); + #endif + break; + case fpga_altera: +diff -Naupr u-boot-1.1.6/common/Makefile u-boot-1.1.6-fsl-1/common/Makefile +--- u-boot-1.1.6/common/Makefile 2006-11-02 08:15:01.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/common/Makefile 2006-11-30 12:34:13.000000000 -0600 +@@ -41,7 +41,7 @@ COBJS = main.o ACEX1K.o altera.o bedbug. + cmd_pci.o cmd_pcmcia.o cmd_portio.o \ + cmd_reginfo.o cmd_reiser.o cmd_scsi.o cmd_spi.o cmd_universe.o \ + cmd_usb.o cmd_vfd.o \ +- command.o console.o devices.o dlmalloc.o docecc.o \ ++ command.o console.o cyclon2.o devices.o dlmalloc.o docecc.o \ + environment.o env_common.o \ + env_nand.o env_dataflash.o env_flash.o env_eeprom.o \ + env_nvram.o env_nowhere.o \ +diff -Naupr u-boot-1.1.6/common/memsize.c u-boot-1.1.6-fsl-1/common/memsize.c +--- u-boot-1.1.6/common/memsize.c 2006-11-02 08:15:01.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/common/memsize.c 2006-11-30 12:34:13.000000000 -0600 +@@ -21,6 +21,16 @@ + * MA 02111-1307 USA + */ + ++#include <config.h> ++#ifdef __PPC__ ++/* ++ * At least on G2 PowerPC cores, sequential accesses to non-existent ++ * memory must be synchronized. ++ */ ++# include <asm/io.h> /* for sync() */ ++#else ++# define sync() /* nothing */ ++#endif + + /* + * Check memory range for valid RAM. A simple memory test determines +@@ -38,20 +48,27 @@ long get_ram_size(volatile long *base, l + + for (cnt = (maxsize / sizeof (long)) >> 1; cnt > 0; cnt >>= 1) { + addr = base + cnt; /* pointer arith! */ ++ sync (); + save[i++] = *addr; ++ sync (); + *addr = ~cnt; + } + + addr = base; ++ sync (); + save[i] = *addr; ++ sync (); + *addr = 0; + ++ sync (); + if ((val = *addr) != 0) { + /* Restore the original data before leaving the function. + */ ++ sync (); + *addr = save[i]; + for (cnt = 1; cnt < maxsize / sizeof(long); cnt <<= 1) { + addr = base + cnt; ++ sync (); + *addr = save[--i]; + } + return (0); +diff -Naupr u-boot-1.1.6/cpu/74xx_7xx/cpu.c u-boot-1.1.6-fsl-1/cpu/74xx_7xx/cpu.c +--- u-boot-1.1.6/cpu/74xx_7xx/cpu.c 2006-11-02 08:15:01.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/cpu/74xx_7xx/cpu.c 2006-12-06 10:33:49.000000000 -0600 +@@ -101,6 +101,10 @@ get_cpu_type(void) + type = CPU_7457; + break; + ++ case 0x8004: ++ type = CPU_7448; ++ break; ++ + default: + break; + } +@@ -152,6 +156,10 @@ int checkcpu (void) + str = "MPC7410"; + break; + ++ case CPU_7448: ++ str = "MPC7448"; ++ break; ++ + case CPU_7450: + str = "MPC7450"; + break; +@@ -221,7 +229,7 @@ soft_restart(unsigned long addr) + void + do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) + { +- ulong addr; ++ ulong addr; + /* flush and disable I/D cache */ + __asm__ __volatile__ ("mfspr 3, 1008" ::: "r3"); + __asm__ __volatile__ ("ori 5, 5, 0xcc00" ::: "r5"); +diff -Naupr u-boot-1.1.6/cpu/74xx_7xx/cpu_init.c u-boot-1.1.6-fsl-1/cpu/74xx_7xx/cpu_init.c +--- u-boot-1.1.6/cpu/74xx_7xx/cpu_init.c 2006-11-02 08:15:01.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/cpu/74xx_7xx/cpu_init.c 2006-12-06 10:33:49.000000000 -0600 +@@ -43,6 +43,7 @@ cpu_init_f (void) + case CPU_7450: + case CPU_7455: + case CPU_7457: ++ case CPU_7448: + /* enable the timebase bit in HID0 */ + set_hid0(get_hid0() | 0x4000000); + break; +diff -Naupr u-boot-1.1.6/cpu/74xx_7xx/speed.c u-boot-1.1.6-fsl-1/cpu/74xx_7xx/speed.c +--- u-boot-1.1.6/cpu/74xx_7xx/speed.c 2006-11-02 08:15:01.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/cpu/74xx_7xx/speed.c 2006-12-06 10:33:49.000000000 -0600 +@@ -91,6 +91,7 @@ int get_clocks (void) + + /* calculate the clock frequency based upon the CPU type */ + switch (get_cpu_type()) { ++ case CPU_7448: + case CPU_7455: + case CPU_7457: + /* +diff -Naupr u-boot-1.1.6/cpu/74xx_7xx/start.S u-boot-1.1.6-fsl-1/cpu/74xx_7xx/start.S +--- u-boot-1.1.6/cpu/74xx_7xx/start.S 2006-11-02 08:15:01.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/cpu/74xx_7xx/start.S 2006-12-06 10:33:49.000000000 -0600 +@@ -44,7 +44,8 @@ + + #if !defined(CONFIG_DB64360) && \ + !defined(CONFIG_DB64460) && \ +- !defined(CONFIG_CPCI750) ++ !defined(CONFIG_CPCI750) && \ ++ !defined(CONFIG_P3Mx) + #include <galileo/gt64260R.h> + #endif + +@@ -270,7 +271,7 @@ in_flash: + * gt-regs BAT can be reused after board_init_f calls + * board_early_init_f (EVB only). + */ +-#if !defined(CONFIG_BAB7xx) && !defined(CONFIG_ELPPC) ++#if !defined(CONFIG_BAB7xx) && !defined(CONFIG_ELPPC) && !defined(CONFIG_P3Mx) + /* enable address translation */ + bl enable_addr_trans + sync +@@ -757,7 +758,8 @@ in_ram: + defined(CONFIG_DB64360) || \ + defined(CONFIG_DB64460) || \ + defined(CONFIG_CPCI750) || \ +- defined(CONFIG_PPMC7XX) ++ defined(CONFIG_PPMC7XX) || \ ++ defined(CONFIG_P3Mx) + mr r4, r9 /* Use RAM copy of the global data */ + #endif + bl after_reloc +diff -Naupr u-boot-1.1.6/cpu/mpc5xxx/cpu.c u-boot-1.1.6-fsl-1/cpu/mpc5xxx/cpu.c +--- u-boot-1.1.6/cpu/mpc5xxx/cpu.c 2006-11-02 08:15:01.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/cpu/mpc5xxx/cpu.c 2006-12-06 10:33:49.000000000 -0600 +@@ -31,6 +31,10 @@ + #include <mpc5xxx.h> + #include <asm/processor.h> + ++#if defined(CONFIG_OF_FLAT_TREE) ++#include <ft_build.h> ++#endif ++ + DECLARE_GLOBAL_DATA_PTR; + + int checkcpu (void) +@@ -102,3 +106,26 @@ unsigned long get_tbclk (void) + } + + /* ------------------------------------------------------------------------- */ ++ ++#ifdef CONFIG_OF_FLAT_TREE ++void ++ft_cpu_setup(void *blob, bd_t *bd) ++{ ++ u32 *p; ++ int len; ++ ++ /* Core XLB bus frequency */ ++ p = ft_get_prop(blob, "/cpus/" OF_CPU "/bus-frequency", &len); ++ if (p != NULL) ++ *p = cpu_to_be32(bd->bi_busfreq); ++ ++ /* SOC peripherals use the IPB bus frequency */ ++ p = ft_get_prop(blob, "/" OF_SOC "/bus-frequency", &len); ++ if (p != NULL) ++ *p = cpu_to_be32(bd->bi_ipbfreq); ++ ++ p = ft_get_prop(blob, "/" OF_SOC "/ethernet@3000/mac-address", &len); ++ if (p != NULL) ++ memcpy(p, bd->bi_enetaddr, 6); ++} ++#endif +diff -Naupr u-boot-1.1.6/cpu/mpc83xx/cpu.c u-boot-1.1.6-fsl-1/cpu/mpc83xx/cpu.c +--- u-boot-1.1.6/cpu/mpc83xx/cpu.c 2006-11-02 08:15:01.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/cpu/mpc83xx/cpu.c 2006-11-30 12:34:13.000000000 -0600 +@@ -1,5 +1,5 @@ + /* +- * Copyright 2004 Freescale Semiconductor, Inc. ++ * Copyright (C) 2004-2006 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. +@@ -18,11 +18,6 @@ + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA +- * +- * Change log: +- * +- * 20050101: Eran Liberty (liberty@freescale.com) +- * Initial file creating (porting from 85XX & 8260) + */ + + /* +@@ -43,35 +38,140 @@ DECLARE_GLOBAL_DATA_PTR; + + int checkcpu(void) + { ++ volatile immap_t *immr; + ulong clock = gd->cpu_clk; + u32 pvr = get_pvr(); ++ u32 spridr; + char buf[32]; + ++ immr = (immap_t *)CFG_IMMR; ++ + if ((pvr & 0xFFFF0000) != PVR_83xx) { + puts("Not MPC83xx Family!!!\n"); + return -1; + } + +- puts("CPU: MPC83xx, "); +- switch(pvr) { +- case PVR_8349_REV10: ++ spridr = immr->sysconf.spridr; ++ puts("CPU: "); ++ switch(spridr) { ++ case SPR_8349E_REV10: ++ case SPR_8349E_REV11: ++ puts("MPC8349E, "); ++ break; ++ case SPR_8349_REV10: ++ case SPR_8349_REV11: ++ puts("MPC8349, "); ++ break; ++ case SPR_8347E_REV10_TBGA: ++ case SPR_8347E_REV11_TBGA: ++ case SPR_8347E_REV10_PBGA: ++ case SPR_8347E_REV11_PBGA: ++ puts("MPC8347E, "); ++ break; ++ case SPR_8347_REV10_TBGA: ++ case SPR_8347_REV11_TBGA: ++ case SPR_8347_REV10_PBGA: ++ case SPR_8347_REV11_PBGA: ++ puts("MPC8347, "); ++ break; ++ case SPR_8343E_REV10: ++ case SPR_8343E_REV11: ++ puts("MPC8343E, "); + break; +- case PVR_8349_REV11: ++ case SPR_8343_REV10: ++ case SPR_8343_REV11: ++ puts("MPC8343, "); ++ break; ++ case SPR_8360E_REV10: ++ case SPR_8360E_REV11: ++ case SPR_8360E_REV12: ++ puts("MPC8360E, "); ++ break; ++ case SPR_8360_REV10: ++ case SPR_8360_REV11: ++ case SPR_8360_REV12: ++ puts("MPC8360, "); + break; + default: + puts("Rev: Unknown\n"); + return -1; /* Not sure what this is */ + } +- printf("Rev: %d.%d at %s MHz\n", (pvr & 0xf0) >> 4, +- (pvr & 0x0f), strmhz(buf, clock)); + ++#if defined(CONFIG_MPC8349) ++ printf("Rev: %02x at %s MHz\n", (spridr & 0x0000FFFF)>>4 |(spridr & 0x0000000F), strmhz(buf, clock)); ++#else ++ printf("Rev: %02x at %s MHz\n", spridr & 0x0000FFFF, strmhz(buf, clock)); ++#endif + return 0; + } + + ++/* ++ * Program a UPM with the code supplied in the table. ++ * ++ * The 'dummy' variable is used to increment the MAD. 'dummy' is ++ * supposed to be a pointer to the memory of the device being ++ * programmed by the UPM. The data in the MDR is written into ++ * memory and the MAD is incremented every time there's a read ++ * from 'dummy'. Unfortunately, the current prototype for this ++ * function doesn't allow for passing the address of this ++ * device, and changing the prototype will break a number lots ++ * of other code, so we need to use a round-about way of finding ++ * the value for 'dummy'. ++ * ++ * The value can be extracted from the base address bits of the ++ * Base Register (BR) associated with the specific UPM. To find ++ * that BR, we need to scan all 8 BRs until we find the one that ++ * has its MSEL bits matching the UPM we want. Once we know the ++ * right BR, we can extract the base address bits from it. ++ * ++ * The MxMR and the BR and OR of the chosen bank should all be ++ * configured before calling this function. ++ * ++ * Parameters: ++ * upm: 0=UPMA, 1=UPMB, 2=UPMC ++ * table: Pointer to an array of values to program ++ * size: Number of elements in the array. Must be 64 or less. ++ */ + void upmconfig (uint upm, uint *table, uint size) + { +- hang(); /* FIXME: upconfig() needed? */ ++#if defined(CONFIG_MPC834X) ++ volatile immap_t *immap = (immap_t *) CFG_IMMR; ++ volatile lbus83xx_t *lbus = &immap->lbus; ++ volatile uchar *dummy = NULL; ++ const u32 msel = (upm + 4) << BR_MSEL_SHIFT; /* What the MSEL field in BRn should be */ ++ volatile u32 *mxmr = &lbus->mamr + upm; /* Pointer to mamr, mbmr, or mcmr */ ++ uint i; ++ ++ /* Scan all the banks to determine the base address of the device */ ++ for (i = 0; i < 8; i++) { ++ if ((lbus->bank[i].br & BR_MSEL) == msel) { ++ dummy = (uchar *) (lbus->bank[i].br & BR_BA); ++ break; ++ } ++ } ++ ++ if (!dummy) { ++ printf("Error: %s() could not find matching BR\n", __FUNCTION__); ++ hang(); ++ } ++ ++ /* Set the OP field in the MxMR to "write" and the MAD field to 000000 */ ++ *mxmr = (*mxmr & 0xCFFFFFC0) | 0x10000000; ++ ++ for (i = 0; i < size; i++) { ++ lbus->mdr = table[i]; ++ __asm__ __volatile__ ("sync"); ++ *dummy; /* Write the value to memory and increment MAD */ ++ __asm__ __volatile__ ("sync"); ++ } ++ ++ /* Set the OP field in the MxMR to "normal" and the MAD field to 000000 */ ++ *mxmr &= 0xCFFFFFC0; ++#else ++ printf("Error: %s() not defined for this configuration.\n", __FUNCTION__); ++ hang(); ++#endif + } + + +@@ -83,7 +183,7 @@ do_reset (cmd_tbl_t * cmdtp, int flag, i + ulong addr; + #endif + +- volatile immap_t *immap = (immap_t *) CFG_IMMRBAR; ++ volatile immap_t *immap = (immap_t *) CFG_IMMR; + + #ifdef MPC83xx_RESET + /* Interrupts and MMU off */ +@@ -150,9 +250,21 @@ unsigned long get_tbclk(void) + #if defined(CONFIG_WATCHDOG) + void watchdog_reset (void) + { +- hang(); /* FIXME: implement watchdog_reset()? */ ++#ifdef CONFIG_MPC834X ++ int re_enable = disable_interrupts(); ++ ++ /* Reset the 83xx watchdog */ ++ volatile immap_t *immr = (immap_t *) CFG_IMMR; ++ immr->wdt.swsrr = 0x556c; ++ immr->wdt.swsrr = 0xaa39; ++ ++ if (re_enable) ++ enable_interrupts (); ++#else ++ hang(); ++#endif + } +-#endif /* CONFIG_WATCHDOG */ ++#endif + + #if defined(CONFIG_OF_FLAT_TREE) + void +@@ -180,12 +292,12 @@ ft_cpu_setup(void *blob, bd_t *bd) + *p = cpu_to_be32(clock); + + #ifdef CONFIG_MPC83XX_TSEC1 +- p = ft_get_prop(blob, "/" OF_SOC "/ethernet@24000/address", &len); ++ p = ft_get_prop(blob, "/" OF_SOC "/ethernet@24000/local-mac-address", &len); + memcpy(p, bd->bi_enetaddr, 6); + #endif + + #ifdef CONFIG_MPC83XX_TSEC2 +- p = ft_get_prop(blob, "/" OF_SOC "/ethernet@25000/address", &len); ++ p = ft_get_prop(blob, "/" OF_SOC "/ethernet@25000/local-mac-address", &len); + memcpy(p, bd->bi_enet1addr, 6); + #endif + } +@@ -194,8 +306,8 @@ ft_cpu_setup(void *blob, bd_t *bd) + #if defined(CONFIG_DDR_ECC) + void dma_init(void) + { +- volatile immap_t *immap = (immap_t *)CFG_IMMRBAR; +- volatile dma8349_t *dma = &immap->dma; ++ volatile immap_t *immap = (immap_t *)CFG_IMMR; ++ volatile dma83xx_t *dma = &immap->dma; + volatile u32 status = swab32(dma->dmasr0); + volatile u32 dmamr0 = swab32(dma->dmamr0); + +@@ -225,8 +337,8 @@ void dma_init(void) + + uint dma_check(void) + { +- volatile immap_t *immap = (immap_t *)CFG_IMMRBAR; +- volatile dma8349_t *dma = &immap->dma; ++ volatile immap_t *immap = (immap_t *)CFG_IMMR; ++ volatile dma83xx_t *dma = &immap->dma; + volatile u32 status = swab32(dma->dmasr0); + volatile u32 byte_count = swab32(dma->dmabcr0); + +@@ -244,8 +356,8 @@ uint dma_check(void) + + int dma_xfer(void *dest, u32 count, void *src) + { +- volatile immap_t *immap = (immap_t *)CFG_IMMRBAR; +- volatile dma8349_t *dma = &immap->dma; ++ volatile immap_t *immap = (immap_t *)CFG_IMMR; ++ volatile dma83xx_t *dma = &immap->dma; + volatile u32 dmamr0; + + /* initialize DMASARn, DMADAR and DMAABCRn */ +diff -Naupr u-boot-1.1.6/cpu/mpc83xx/cpu_init.c u-boot-1.1.6-fsl-1/cpu/mpc83xx/cpu_init.c +--- u-boot-1.1.6/cpu/mpc83xx/cpu_init.c 2006-11-02 08:15:01.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/cpu/mpc83xx/cpu_init.c 2006-11-30 12:34:13.000000000 -0600 +@@ -1,5 +1,5 @@ + /* +- * Copyright 2004 Freescale Semiconductor, Inc. ++ * Copyright (C) 2004-2006 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. +@@ -18,11 +18,6 @@ + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA +- * +- * Change log: +- * +- * 20050101: Eran Liberty (liberty@freescale.com) +- * Initial file creating (porting from 85XX & 8260) + */ + + #include <common.h> +@@ -31,6 +26,30 @@ + + DECLARE_GLOBAL_DATA_PTR; + ++#ifdef CONFIG_QE ++extern qe_iop_conf_t qe_iop_conf_tab[]; ++extern void qe_config_iopin(u8 port, u8 pin, int dir, ++ int open_drain, int assign); ++extern void qe_init(uint qe_base); ++extern void qe_reset(void); ++ ++static void config_qe_ioports(void) ++{ ++ u8 port, pin; ++ int dir, open_drain, assign; ++ int i; ++ ++ for (i = 0; qe_iop_conf_tab[i].assign != QE_IOP_TAB_END; i++) { ++ port = qe_iop_conf_tab[i].port; ++ pin = qe_iop_conf_tab[i].pin; ++ dir = qe_iop_conf_tab[i].dir; ++ open_drain = qe_iop_conf_tab[i].open_drain; ++ assign = qe_iop_conf_tab[i].assign; ++ qe_config_iopin(port, pin, dir, open_drain, assign); ++ } ++} ++#endif ++ + /* + * Breathe some life into the CPU... + * +@@ -46,6 +65,37 @@ void cpu_init_f (volatile immap_t * im) + /* Clear initial global data */ + memset ((void *) gd, 0, sizeof (gd_t)); + ++ /* system performance tweaking */ ++ ++#ifdef CFG_ACR_PIPE_DEP ++ /* Arbiter pipeline depth */ ++ im->arbiter.acr = (im->arbiter.acr & ~ACR_PIPE_DEP) | (3 << ACR_PIPE_DEP_SHIFT); ++#endif ++ ++#ifdef CFG_SPCR_TSEC1EP ++ /* TSEC1 Emergency priority */ ++ im->sysconf.spcr = (im->sysconf.spcr & ~SPCR_TSEC1EP) | (3 << SPCR_TSEC1EP_SHIFT); ++#endif ++ ++#ifdef CFG_SPCR_TSEC2EP ++ /* TSEC2 Emergency priority */ ++ im->sysconf.spcr = (im->sysconf.spcr & ~SPCR_TSEC2EP) | (3 << SPCR_TSEC2EP_SHIFT); ++#endif ++ ++#ifdef CFG_SCCR_TSEC1CM ++ /* TSEC1 clock mode */ ++ im->clk.sccr = (im->clk.sccr & ~SCCR_TSEC1CM) | (1 << SCCR_TSEC1CM_SHIFT); ++#endif ++#ifdef CFG_SCCR_TSEC2CM ++ /* TSEC2 & I2C1 clock mode */ ++ im->clk.sccr = (im->clk.sccr & ~SCCR_TSEC2CM) | (1 << SCCR_TSEC2CM_SHIFT); ++#endif ++ ++#ifdef CFG_ACR_RPTCNT ++ /* Arbiter repeat count */ ++ im->arbiter.acr = ((im->arbiter.acr & ~(ACR_RPTCNT)) | (3 << ACR_RPTCNT_SHIFT)); ++#endif ++ + /* RSR - Reset Status Register - clear all status (4.6.1.3) */ + gd->reset_status = im->reset.rsr; + im->reset.rsr = ~(RSR_RES); +@@ -69,6 +119,10 @@ void cpu_init_f (volatile immap_t * im) + #ifdef CFG_SICRL + im->sysconf.sicrl = CFG_SICRL; + #endif ++#ifdef CONFIG_QE ++ /* Config QE ioports */ ++ config_qe_ioports(); ++#endif + + /* + * Memory Controller: +@@ -157,12 +211,12 @@ void cpu_init_f (volatile immap_t * im) + #endif + } + +- +-/* +- * Initialize higher level parts of CPU like time base and timers. +- */ +- + int cpu_init_r (void) + { ++#ifdef CONFIG_QE ++ uint qe_base = CFG_IMMR + 0x00100000; /* QE immr base */ ++ qe_init(qe_base); ++ qe_reset(); ++#endif + return 0; + } +diff -Naupr u-boot-1.1.6/cpu/mpc83xx/i2c.c u-boot-1.1.6-fsl-1/cpu/mpc83xx/i2c.c +--- u-boot-1.1.6/cpu/mpc83xx/i2c.c 2006-11-02 08:15:01.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/cpu/mpc83xx/i2c.c 1969-12-31 18:00:00.000000000 -0600 +@@ -1,253 +0,0 @@ +-/* +- * (C) Copyright 2003,Motorola Inc. +- * Xianghua Xiao <x.xiao@motorola.com> +- * Adapted for Motorola 85xx chip. +- * +- * (C) Copyright 2003 +- * Gleb Natapov <gnatapov@mrv.com> +- * Some bits are taken from linux driver writen by adrian@humboldt.co.uk +- * +- * Hardware I2C driver for MPC107 PCI bridge. +- * +- * See file CREDITS for list of people who contributed to this +- * project. +- * +- * This program is free software; you can redistribute it and/or +- * modify it under the terms of the GNU General Public License as +- * published by the Free Software Foundation; either version 2 of +- * the License, or (at your option) any later version. +- * +- * This program is distributed in the hope that it will be useful, +- * but WITHOUT ANY WARRANTY; without even the implied warranty of +- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +- * GNU General Public License for more details. +- * +- * You should have received a copy of the GNU General Public License +- * along with this program; if not, write to the Free Software +- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, +- * MA 02111-1307 USA +- * +- * Change log: +- * +- * 20050101: Eran Liberty (liberty@freescale.com) +- * Initial file creating (porting from 85XX & 8260) +- */ +- +-#include <common.h> +-#include <command.h> +-#include <asm/io.h> +- +-#ifdef CONFIG_HARD_I2C +-#include <i2c.h> +-#include <asm/i2c.h> +- +-#if defined(CONFIG_MPC8349EMDS) || defined(CONFIG_TQM834X) +-i2c_t * mpc8349_i2c = (i2c_t*)(CFG_IMMRBAR + CFG_I2C_OFFSET); +-#endif +- +-void +-i2c_init(int speed, int slaveadd) +-{ +- /* stop I2C controller */ +- writeb(0x00 , &I2C->cr); +- +- /* set clock */ +- writeb(0x3f, &I2C->fdr); +- +- /* set default filter */ +- writeb(0x10,&I2C->dfsrr); +- +- /* write slave address */ +- writeb(slaveadd, &I2C->adr); +- +- /* clear status register */ +- writeb(0x00, &I2C->sr); +- +- /* start I2C controller */ +- writeb(I2C_CR_MEN, &I2C->cr); +-} +- +-static __inline__ int +-i2c_wait4bus (void) +-{ +- ulong timeval = get_timer (0); +- while (readb(&I2C->sr) & I2C_SR_MBB) { +- if (get_timer (timeval) > I2C_TIMEOUT) { +- return -1; +- } +- } +- return 0; +-} +- +-static __inline__ int +-i2c_wait (int write) +-{ +- u32 csr; +- ulong timeval = get_timer(0); +- do { +- csr = readb(&I2C->sr); +- +- if (!(csr & I2C_SR_MIF)) +- continue; +- +- writeb(0x0, &I2C->sr); +- +- if (csr & I2C_SR_MAL) { +- debug("i2c_wait: MAL\n"); +- return -1; +- } +- +- if (!(csr & I2C_SR_MCF)) { +- debug("i2c_wait: unfinished\n"); +- return -1; +- } +- +- if (write == I2C_WRITE && (csr & I2C_SR_RXAK)) { +- debug("i2c_wait: No RXACK\n"); +- return -1; +- } +- +- return 0; +- } while (get_timer (timeval) < I2C_TIMEOUT); +- +- debug("i2c_wait: timed out\n"); +- return -1; +-} +- +-static __inline__ int +-i2c_write_addr (u8 dev, u8 dir, int rsta) +-{ +- writeb(I2C_CR_MEN | I2C_CR_MSTA | I2C_CR_MTX | +- (rsta?I2C_CR_RSTA:0), +- &I2C->cr); +- +- writeb((dev << 1) | dir, &I2C->dr); +- +- if (i2c_wait (I2C_WRITE) < 0) +- return 0; +- return 1; +-} +- +-static __inline__ int +-__i2c_write (u8 *data, int length) +-{ +- int i; +- +- writeb(I2C_CR_MEN | I2C_CR_MSTA | I2C_CR_MTX, +- &I2C->cr); +- +- for (i=0; i < length; i++) { +- writeb(data[i], &I2C->dr); +- +- if (i2c_wait (I2C_WRITE) < 0) +- break; +- } +- return i; +-} +- +-static __inline__ int +-__i2c_read (u8 *data, int length) +-{ +- int i; +- +- writeb(I2C_CR_MEN | I2C_CR_MSTA | +- ((length == 1) ? I2C_CR_TXAK : 0), +- &I2C->cr); +- +- /* dummy read */ +- readb(&I2C->dr); +- +- for (i=0; i < length; i++) { +- if (i2c_wait (I2C_READ) < 0) +- break; +- +- /* Generate ack on last next to last byte */ +- if (i == length - 2) +- writeb(I2C_CR_MEN | I2C_CR_MSTA | +- I2C_CR_TXAK, +- &I2C->cr); +- +- /* Generate stop on last byte */ +- if (i == length - 1) +- writeb(I2C_CR_MEN | I2C_CR_TXAK, &I2C->cr); +- +- data[i] = readb(&I2C->dr); +- } +- return i; +-} +- +-int +-i2c_read (u8 dev, uint addr, int alen, u8 *data, int length) +-{ +- int i = 0; +- u8 *a = (u8*)&addr; +- +- if (i2c_wait4bus () < 0) +- goto exit; +- +- if (i2c_write_addr (dev, I2C_WRITE, 0) == 0) +- goto exit; +- +- if (__i2c_write (&a[4 - alen], alen) != alen) +- goto exit; +- +- if (i2c_write_addr (dev, I2C_READ, 1) == 0) +- goto exit; +- +- i = __i2c_read (data, length); +- +- exit: +- writeb(I2C_CR_MEN, &I2C->cr); +- return !(i == length); +-} +- +-int +-i2c_write (u8 dev, uint addr, int alen, u8 *data, int length) +-{ +- int i = 0; +- u8 *a = (u8*)&addr; +- +- if (i2c_wait4bus () < 0) +- goto exit; +- +- if (i2c_write_addr (dev, I2C_WRITE, 0) == 0) +- goto exit; +- +- if (__i2c_write (&a[4 - alen], alen) != alen) +- goto exit; +- +- i = __i2c_write (data, length); +- +- exit: +- writeb(I2C_CR_MEN, &I2C->cr); +- return !(i == length); +-} +- +-int i2c_probe (uchar chip) +-{ +- int tmp; +- +- /* +- * Try to read the first location of the chip. The underlying +- * driver doesn't appear to support sending just the chip address +- * and looking for an <ACK> back. +- */ +- udelay(10000); +- return i2c_read (chip, 0, 1, (uchar *)&tmp, 1); +-} +- +-uchar i2c_reg_read (uchar i2c_addr, uchar reg) +-{ +- uchar buf[1]; +- +- i2c_read (i2c_addr, reg, 1, buf, 1); +- +- return (buf[0]); +-} +- +-void i2c_reg_write (uchar i2c_addr, uchar reg, uchar val) +-{ +- i2c_write (i2c_addr, reg, 1, &val, 1); +-} +- +-#endif /* CONFIG_HARD_I2C */ +diff -Naupr u-boot-1.1.6/cpu/mpc83xx/interrupts.c u-boot-1.1.6-fsl-1/cpu/mpc83xx/interrupts.c +--- u-boot-1.1.6/cpu/mpc83xx/interrupts.c 2006-11-02 08:15:01.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/cpu/mpc83xx/interrupts.c 2006-11-30 12:34:13.000000000 -0600 +@@ -21,13 +21,6 @@ + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA +- * +- * Change log: +- * +- * Hacked for MPC8260 by Murray.Jensen@cmst.csiro.au, 22-Oct-00 +- * +- * 20050101: Eran Liberty (liberty@freescale.com) +- * Initial file creating (porting from 85XX & 8260) + */ + + #include <common.h> +@@ -45,7 +38,7 @@ struct irq_action { + + int interrupt_init_cpu (unsigned *decrementer_count) + { +- volatile immap_t *immr = (immap_t *) CFG_IMMRBAR; ++ volatile immap_t *immr = (immap_t *) CFG_IMMR; + + *decrementer_count = (gd->bus_clk / 4) / CFG_HZ; + +diff -Naupr u-boot-1.1.6/cpu/mpc83xx/Makefile u-boot-1.1.6-fsl-1/cpu/mpc83xx/Makefile +--- u-boot-1.1.6/cpu/mpc83xx/Makefile 2006-11-02 08:15:01.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/cpu/mpc83xx/Makefile 2006-11-10 11:24:29.000000000 -0600 +@@ -27,9 +27,9 @@ include $(TOPDIR)/config.mk + + LIB = $(obj)lib$(CPU).a + +-START = start.o resetvec.o ++START = start.o + COBJS = traps.o cpu.o cpu_init.o speed.o interrupts.o \ +- i2c.o spd_sdram.o ++ spd_sdram.o qe_io.o + + SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c) + OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) +diff -Naupr u-boot-1.1.6/cpu/mpc83xx/qe_io.c u-boot-1.1.6-fsl-1/cpu/mpc83xx/qe_io.c +--- u-boot-1.1.6/cpu/mpc83xx/qe_io.c 1969-12-31 18:00:00.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/cpu/mpc83xx/qe_io.c 2006-11-10 11:24:29.000000000 -0600 +@@ -0,0 +1,85 @@ ++/* ++ * Copyright (C) 2006 Freescale Semiconductor, Inc. ++ * ++ * Dave Liu <daveliu@freescale.com> ++ * based on source code of Shlomi Gridish ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#include "common.h" ++#include "asm/errno.h" ++#include "asm/io.h" ++#include "asm/immap_83xx.h" ++ ++#if defined(CONFIG_QE) ++#define NUM_OF_PINS 32 ++void qe_config_iopin(u8 port, u8 pin, int dir, int open_drain, int assign) ++{ ++ u32 pin_2bit_mask; ++ u32 pin_2bit_dir; ++ u32 pin_2bit_assign; ++ u32 pin_1bit_mask; ++ u32 tmp_val; ++ volatile immap_t *im = (volatile immap_t *)CFG_IMMR; ++ volatile gpio83xx_t *par_io =(volatile gpio83xx_t *)&im->gpio; ++ ++ /* Caculate pin location and 2bit mask and dir */ ++ pin_2bit_mask = (u32)(0x3 << (NUM_OF_PINS-(pin%(NUM_OF_PINS/2)+1)*2)); ++ pin_2bit_dir = (u32)(dir << (NUM_OF_PINS-(pin%(NUM_OF_PINS/2)+1)*2)); ++ ++ /* Setup the direction */ ++ tmp_val = (pin > (NUM_OF_PINS/2) - 1) ? \ ++ in_be32(&par_io->ioport[port].dir2) : ++ in_be32(&par_io->ioport[port].dir1); ++ ++ if (pin > (NUM_OF_PINS/2) -1) { ++ out_be32(&par_io->ioport[port].dir2, ~pin_2bit_mask & tmp_val); ++ out_be32(&par_io->ioport[port].dir2, pin_2bit_dir | tmp_val); ++ } else { ++ out_be32(&par_io->ioport[port].dir1, ~pin_2bit_mask & tmp_val); ++ out_be32(&par_io->ioport[port].dir1, pin_2bit_dir | tmp_val); ++ } ++ ++ /* Calculate pin location for 1bit mask */ ++ pin_1bit_mask = (u32)(1 << (NUM_OF_PINS - (pin+1))); ++ ++ /* Setup the open drain */ ++ tmp_val = in_be32(&par_io->ioport[port].podr); ++ if (open_drain) { ++ out_be32(&par_io->ioport[port].podr, pin_1bit_mask | tmp_val); ++ } else { ++ out_be32(&par_io->ioport[port].podr, ~pin_1bit_mask & tmp_val); ++ } ++ ++ /* Setup the assignment */ ++ tmp_val = (pin > (NUM_OF_PINS/2) - 1) ? ++ in_be32(&par_io->ioport[port].ppar2): ++ in_be32(&par_io->ioport[port].ppar1); ++ pin_2bit_assign = (u32)(assign ++ << (NUM_OF_PINS - (pin%(NUM_OF_PINS/2)+1)*2)); ++ ++ /* Clear and set 2 bits mask */ ++ if (pin > (NUM_OF_PINS/2) - 1) { ++ out_be32(&par_io->ioport[port].ppar2, ~pin_2bit_mask & tmp_val); ++ out_be32(&par_io->ioport[port].ppar2, pin_2bit_assign | tmp_val); ++ } else { ++ out_be32(&par_io->ioport[port].ppar1, ~pin_2bit_mask & tmp_val); ++ out_be32(&par_io->ioport[port].ppar1, pin_2bit_assign | tmp_val); ++ } ++} ++ ++#endif /* CONFIG_QE */ +diff -Naupr u-boot-1.1.6/cpu/mpc83xx/resetvec.S u-boot-1.1.6-fsl-1/cpu/mpc83xx/resetvec.S +--- u-boot-1.1.6/cpu/mpc83xx/resetvec.S 2006-11-02 08:15:01.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/cpu/mpc83xx/resetvec.S 1969-12-31 18:00:00.000000000 -0600 +@@ -1,6 +0,0 @@ +- .section .resetvec,"ax" +-#ifndef FIXME +-#if 0 +- b _start_e500 +-#endif +-#endif +diff -Naupr u-boot-1.1.6/cpu/mpc83xx/spd_sdram.c u-boot-1.1.6-fsl-1/cpu/mpc83xx/spd_sdram.c +--- u-boot-1.1.6/cpu/mpc83xx/spd_sdram.c 2006-11-02 08:15:01.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/cpu/mpc83xx/spd_sdram.c 2006-12-06 10:33:49.000000000 -0600 +@@ -1,8 +1,10 @@ + /* ++ * (C) Copyright 2006 Freescale Semiconductor, Inc. ++ * + * (C) Copyright 2006 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * +- * Copyright 2004 Freescale Semiconductor. ++ * Copyright (C) 2004-2006 Freescale Semiconductor, Inc. + * (C) Copyright 2003 Motorola Inc. + * Xianghua Xiao (X.Xiao@motorola.com) + * +@@ -23,11 +25,6 @@ + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA +- * +- * Change log: +- * +- * 20050101: Eran Liberty (liberty@freescale.com) +- * Initial file creating (porting from 85XX & 8260) + */ + + #include <common.h> +@@ -39,7 +36,9 @@ + + #ifdef CONFIG_SPD_EEPROM + +-#if defined(CONFIG_DDR_ECC) ++DECLARE_GLOBAL_DATA_PTR; ++ ++#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRC) + extern void dma_init(void); + extern uint dma_check(void); + extern int dma_xfer(void *dest, uint count, void *src); +@@ -52,16 +51,16 @@ extern int dma_xfer(void *dest, uint cou + /* + * Convert picoseconds into clock cycles (rounding up if needed). + */ +- + int + picos_to_clk(int picos) + { ++ unsigned int ddr_bus_clk; + int clks; + +- clks = picos / (2000000000 / (get_bus_freq(0) / 1000)); +- if (picos % (2000000000 / (get_bus_freq(0) / 1000)) != 0) { +- clks++; +- } ++ ddr_bus_clk = gd->ddr_clk >> 1; ++ clks = picos / ((1000000000 / ddr_bus_clk) * 1000); ++ if (picos % ((1000000000 / ddr_bus_clk) * 1000) != 0) ++ clks++; + + return clks; + } +@@ -103,33 +102,72 @@ static void spd_debug(spd_eeprom_t *spd) + + long int spd_sdram() + { +- volatile immap_t *immap = (immap_t *)CFG_IMMRBAR; +- volatile ddr8349_t *ddr = &immap->ddr; +- volatile law8349_t *ecm = &immap->sysconf.ddrlaw[0]; ++ volatile immap_t *immap = (immap_t *)CFG_IMMR; ++ volatile ddr83xx_t *ddr = &immap->ddr; ++ volatile law83xx_t *ecm = &immap->sysconf.ddrlaw[0]; + spd_eeprom_t spd; +- unsigned tmp, tmp1; + unsigned int memsize; + unsigned int law_size; +- unsigned char caslat; +- unsigned int trfc, trfc_clk, trfc_low; ++ unsigned char caslat, caslat_ctrl; ++ unsigned char burstlen; ++ unsigned int max_bus_clk; ++ unsigned int max_data_rate, effective_data_rate; ++ unsigned int ddrc_clk; ++ unsigned int refresh_clk; ++ unsigned sdram_cfg; ++ unsigned int ddrc_ecc_enable; + ++ /* Read SPD parameters with I2C */ + CFG_READ_SPD(SPD_EEPROM_ADDRESS, 0, 1, (uchar *) & spd, sizeof (spd)); + #ifdef SPD_DEBUG + spd_debug(&spd); + #endif ++ /* Check the memory type */ ++ if (spd.mem_type != SPD_MEMTYPE_DDR) { ++ printf("DDR: Module mem type is %02X\n", spd.mem_type); ++ return 0; ++ } ++ ++ /* Check the number of physical bank */ + if (spd.nrows > 2) { +- puts("DDR:Only two chip selects are supported on ADS.\n"); ++ printf("DDR: The number of physical bank is %02X\n", spd.nrows); + return 0; + } + +- if (spd.nrow_addr < 12 +- || spd.nrow_addr > 14 +- || spd.ncol_addr < 8 +- || spd.ncol_addr > 11) { +- puts("DDR:Row or Col number unsupported.\n"); ++ /* Check if the number of row of the module is in the range of DDRC */ ++ if (spd.nrow_addr < 12 || spd.nrow_addr > 14) { ++ printf("DDR: Row number is out of range of DDRC, row=%02X\n", ++ spd.nrow_addr); + return 0; + } + ++ /* Check if the number of col of the module is in the range of DDRC */ ++ if (spd.ncol_addr < 8 || spd.ncol_addr > 11) { ++ printf("DDR: Col number is out of range of DDRC, col=%02X\n", ++ spd.ncol_addr); ++ return 0; ++ } ++ /* Setup DDR chip select register */ ++#ifdef CFG_83XX_DDR_USES_CS0 ++ ddr->csbnds[0].csbnds = (banksize(spd.row_dens) >> 24) - 1; ++ ddr->cs_config[0] = ( 1 << 31 ++ | (spd.nrow_addr - 12) << 8 ++ | (spd.ncol_addr - 8) ); ++ debug("\n"); ++ debug("cs0_bnds = 0x%08x\n",ddr->csbnds[0].csbnds); ++ debug("cs0_config = 0x%08x\n",ddr->cs_config[0]); ++ ++ if (spd.nrows == 2) { ++ ddr->csbnds[1].csbnds = ( (banksize(spd.row_dens) >> 8) ++ | ((banksize(spd.row_dens) >> 23) - 1) ); ++ ddr->cs_config[1] = ( 1<<31 ++ | (spd.nrow_addr-12) << 8 ++ | (spd.ncol_addr-8) ); ++ debug("cs1_bnds = 0x%08x\n",ddr->csbnds[1].csbnds); ++ debug("cs1_config = 0x%08x\n",ddr->cs_config[1]); ++ } ++ ++#else + ddr->csbnds[2].csbnds = (banksize(spd.row_dens) >> 24) - 1; + ddr->cs_config[2] = ( 1 << 31 + | (spd.nrow_addr - 12) << 8 +@@ -147,6 +185,7 @@ long int spd_sdram() + debug("cs3_bnds = 0x%08x\n",ddr->csbnds[3].csbnds); + debug("cs3_config = 0x%08x\n",ddr->cs_config[3]); + } ++#endif + + if (spd.mem_type != 0x07) { + puts("No DDR module found!\n"); +@@ -172,56 +211,136 @@ long int spd_sdram() + debug("DDR:ar=0x%08x\n", ecm->ar); + + /* +- * find the largest CAS +- */ +- if(spd.cas_lat & 0x40) { +- caslat = 7; +- } else if (spd.cas_lat & 0x20) { +- caslat = 6; +- } else if (spd.cas_lat & 0x10) { +- caslat = 5; +- } else if (spd.cas_lat & 0x08) { +- caslat = 4; +- } else if (spd.cas_lat & 0x04) { +- caslat = 3; +- } else if (spd.cas_lat & 0x02) { +- caslat = 2; +- } else if (spd.cas_lat & 0x01) { +- caslat = 1; +- } else { +- puts("DDR:no valid CAS Latency information.\n"); ++ * Find the largest CAS by locating the highest 1 bit ++ * in the spd.cas_lat field. Translate it to a DDR ++ * controller field value: ++ * ++ * CAS Lat DDR I Ctrl ++ * Clocks SPD Bit Value ++ * -------+--------+--------- ++ * 1.0 0 001 ++ * 1.5 1 010 ++ * 2.0 2 011 ++ * 2.5 3 100 ++ * 3.0 4 101 ++ * 3.5 5 110 ++ * 4.0 6 111 ++ */ ++ caslat = __ilog2(spd.cas_lat); ++ ++ if (caslat > 6 ) { ++ printf("DDR: Invalid SPD CAS Latency, caslat=%02X\n", ++ spd.cas_lat); + return 0; + } +- +- tmp = 20000 / (((spd.clk_cycle & 0xF0) >> 4) * 10 +- + (spd.clk_cycle & 0x0f)); +- debug("DDR:Module maximum data rate is: %dMhz\n", tmp); +- +- tmp1 = get_bus_freq(0) / 1000000; +- if (tmp1 < 230 && tmp1 >= 90 && tmp >= 230) { +- /* 90~230 range, treated as DDR 200 */ +- if (spd.clk_cycle3 == 0xa0) +- caslat -= 2; +- else if(spd.clk_cycle2 == 0xa0) +- caslat--; +- } else if (tmp1 < 280 && tmp1 >= 230 && tmp >= 280) { +- /* 230-280 range, treated as DDR 266 */ +- if (spd.clk_cycle3 == 0x75) +- caslat -= 2; +- else if (spd.clk_cycle2 == 0x75) +- caslat--; +- } else if (tmp1 < 350 && tmp1 >= 280 && tmp >= 350) { +- /* 280~350 range, treated as DDR 333 */ +- if (spd.clk_cycle3 == 0x60) +- caslat -= 2; +- else if (spd.clk_cycle2 == 0x60) +- caslat--; +- } else if (tmp1 < 90 || tmp1 >= 350) { +- /* DDR rate out-of-range */ +- puts("DDR:platform frequency is not fit for DDR rate\n"); +- return 0; ++ max_bus_clk = 1000 *10 / (((spd.clk_cycle & 0xF0) >> 4) * 10 ++ + (spd.clk_cycle & 0x0f)); ++ max_data_rate = max_bus_clk * 2; ++ ++ debug("DDR:Module maximum data rate is: %dMhz\n", max_data_rate); ++ ++ ddrc_clk = gd->ddr_clk / 1000000; ++ ++ if (max_data_rate >= 390) { /* it is DDR 400 */ ++ if (ddrc_clk <= 410 && ddrc_clk > 350) { ++ /* DDR controller clk at 350~410 */ ++ effective_data_rate = 400; /* 5ns */ ++ caslat = caslat; ++ } else if (ddrc_clk <= 350 && ddrc_clk > 280) { ++ /* DDR controller clk at 280~350 */ ++ effective_data_rate = 333; /* 6ns */ ++ if (spd.clk_cycle2 == 0x60) ++ caslat = caslat - 1; ++ else ++ caslat = caslat; ++ } else if (ddrc_clk <= 280 && ddrc_clk > 230) { ++ /* DDR controller clk at 230~280 */ ++ effective_data_rate = 266; /* 7.5ns */ ++ if (spd.clk_cycle3 == 0x75) ++ caslat = caslat - 2; ++ else if (spd.clk_cycle2 == 0x60) ++ caslat = caslat - 1; ++ else ++ caslat = caslat; ++ } else if (ddrc_clk <= 230 && ddrc_clk > 90) { ++ /* DDR controller clk at 90~230 */ ++ effective_data_rate = 200; /* 10ns */ ++ if (spd.clk_cycle3 == 0x75) ++ caslat = caslat - 2; ++ else if (spd.clk_cycle2 == 0x60) ++ caslat = caslat - 1; ++ else ++ caslat = caslat; ++ } ++ } else if (max_data_rate >= 323) { /* it is DDR 333 */ ++ if (ddrc_clk <= 350 && ddrc_clk > 280) { ++ /* DDR controller clk at 280~350 */ ++ effective_data_rate = 333; /* 6ns */ ++ caslat = caslat; ++ } else if (ddrc_clk <= 280 && ddrc_clk > 230) { ++ /* DDR controller clk at 230~280 */ ++ effective_data_rate = 266; /* 7.5ns */ ++ if (spd.clk_cycle2 == 0x75) ++ caslat = caslat - 1; ++ else ++ caslat = caslat; ++ } else if (ddrc_clk <= 230 && ddrc_clk > 90) { ++ /* DDR controller clk at 90~230 */ ++ effective_data_rate = 200; /* 10ns */ ++ if (spd.clk_cycle3 == 0xa0) ++ caslat = caslat - 2; ++ else if (spd.clk_cycle2 == 0x75) ++ caslat = caslat - 1; ++ else ++ caslat = caslat; ++ } ++ } else if (max_data_rate >= 256) { /* it is DDR 266 */ ++ if (ddrc_clk <= 350 && ddrc_clk > 280) { ++ /* DDR controller clk at 280~350 */ ++ printf("DDR: DDR controller freq is more than " ++ "max data rate of the module\n"); ++ return 0; ++ } else if (ddrc_clk <= 280 && ddrc_clk > 230) { ++ /* DDR controller clk at 230~280 */ ++ effective_data_rate = 266; /* 7.5ns */ ++ caslat = caslat; ++ } else if (ddrc_clk <= 230 && ddrc_clk > 90) { ++ /* DDR controller clk at 90~230 */ ++ effective_data_rate = 200; /* 10ns */ ++ if (spd.clk_cycle2 == 0xa0) ++ caslat = caslat - 1; ++ } ++ } else if (max_data_rate >= 190) { /* it is DDR 200 */ ++ if (ddrc_clk <= 350 && ddrc_clk > 230) { ++ /* DDR controller clk at 230~350 */ ++ printf("DDR: DDR controller freq is more than " ++ "max data rate of the module\n"); ++ return 0; ++ } else if (ddrc_clk <= 230 && ddrc_clk > 90) { ++ /* DDR controller clk at 90~230 */ ++ effective_data_rate = 200; /* 10ns */ ++ caslat = caslat; ++ } + } + ++ debug("DDR:Effective data rate is: %dMhz\n", effective_data_rate); ++ debug("DDR:The MSB 1 of CAS Latency is: %d\n", caslat); ++ ++ /* ++ * Errata DDR6 work around: input enable 2 cycles earlier. ++ * including MPC834x Rev1.0/1.1 and MPC8360 Rev1.1/1.2. ++ */ ++ if (caslat == 2) ++ ddr->debug_reg = 0x201c0000; /* CL=2 */ ++ else if (caslat == 3) ++ ddr->debug_reg = 0x202c0000; /* CL=2.5 */ ++ else if (caslat == 4) ++ ddr->debug_reg = 0x202c0000; /* CL=3.0 */ ++ ++ __asm__ __volatile__ ("sync"); ++ ++ debug("Errata DDR6 (debug_reg=0x%08x)\n", ddr->debug_reg); ++ + /* + * note: caslat must also be programmed into ddr->sdram_mode + * register. +@@ -229,16 +348,14 @@ long int spd_sdram() + * note: WRREC(Twr) and WRTORD(Twtr) are not in SPD, + * use conservative value here. + */ +- trfc = spd.trfc * 1000; /* up to ps */ +- trfc_clk = picos_to_clk(trfc); +- trfc_low = (trfc_clk - 8) & 0xf; ++ caslat_ctrl = (caslat + 1) & 0x07; /* see as above */ + + ddr->timing_cfg_1 = + (((picos_to_clk(spd.trp * 250) & 0x07) << 28 ) | + ((picos_to_clk(spd.tras * 1000) & 0x0f ) << 24 ) | + ((picos_to_clk(spd.trcd * 250) & 0x07) << 20 ) | +- ((caslat & 0x07) << 16 ) | +- (trfc_low << 12 ) | ++ ((caslat_ctrl & 0x07) << 16 ) | ++ (((picos_to_clk(spd.trfc * 1000) - 8) & 0x0f) << 12 ) | + ( 0x300 ) | + ((picos_to_clk(spd.trrd * 250) & 0x07) << 4) | 1); + +@@ -246,144 +363,143 @@ long int spd_sdram() + + debug("DDR:timing_cfg_1=0x%08x\n", ddr->timing_cfg_1); + debug("DDR:timing_cfg_2=0x%08x\n", ddr->timing_cfg_2); ++ /* Setup init value, but not enable */ ++ ddr->sdram_cfg = 0x42000000; + +- /* +- * Only DDR I is supported +- * DDR I and II have different mode-register-set definition +- */ +- switch(caslat) { +- case 2: +- tmp = 0x50; /* 1.5 */ +- break; +- case 3: +- tmp = 0x20; /* 2.0 */ +- break; +- case 4: +- tmp = 0x60; /* 2.5 */ +- break; +- case 5: +- tmp = 0x30; /* 3.0 */ +- break; +- default: +- puts("DDR:only CAS Latency 1.5, 2.0, 2.5, 3.0 is supported.\n"); +- return 0; ++ /* Check DIMM data bus width */ ++ if (spd.dataw_lsb == 0x20) { ++ burstlen = 0x03; /* 32 bit data bus, burst len is 8 */ ++ printf("\n DDR DIMM: data bus width is 32 bit"); ++ } else { ++ burstlen = 0x02; /* Others act as 64 bit bus, burst len is 4 */ ++ printf("\n DDR DIMM: data bus width is 64 bit"); ++ } ++ ++ /* Is this an ECC DDR chip? */ ++ if (spd.config == 0x02) ++ printf(" with ECC\n"); ++ else ++ printf(" without ECC\n"); ++ ++ /* Burst length is always 4 for 64 bit data bus, 8 for 32 bit data bus, ++ Burst type is sequential ++ */ ++ switch (caslat) { ++ case 1: ++ ddr->sdram_mode = 0x50 | burstlen; /* CL=1.5 */ ++ break; ++ case 2: ++ ddr->sdram_mode = 0x20 | burstlen; /* CL=2.0 */ ++ break; ++ case 3: ++ ddr->sdram_mode = 0x60 | burstlen; /* CL=2.5 */ ++ break; ++ case 4: ++ ddr->sdram_mode = 0x30 | burstlen; /* CL=3.0 */ ++ break; ++ default: ++ printf("DDR:only CL 1.5, 2.0, 2.5, 3.0 is supported\n"); ++ return 0; + } +-#if defined (CONFIG_DDR_32BIT) +- /* set burst length to 8 for 32-bit data path */ +- tmp |= 0x03; +-#else +- /* set burst length to 4 - default for 64-bit data path */ +- tmp |= 0x02; +-#endif +- ddr->sdram_mode = tmp; + debug("DDR:sdram_mode=0x%08x\n", ddr->sdram_mode); + +- switch(spd.refresh) { +- case 0x00: +- case 0x80: +- tmp = picos_to_clk(15625000); +- break; +- case 0x01: +- case 0x81: +- tmp = picos_to_clk(3900000); +- break; +- case 0x02: +- case 0x82: +- tmp = picos_to_clk(7800000); +- break; +- case 0x03: +- case 0x83: +- tmp = picos_to_clk(31300000); +- break; +- case 0x04: +- case 0x84: +- tmp = picos_to_clk(62500000); +- break; +- case 0x05: +- case 0x85: +- tmp = picos_to_clk(125000000); +- break; +- default: +- tmp = 0x512; +- break; ++ switch (spd.refresh) { ++ case 0x00: ++ case 0x80: ++ refresh_clk = picos_to_clk(15625000); ++ break; ++ case 0x01: ++ case 0x81: ++ refresh_clk = picos_to_clk(3900000); ++ break; ++ case 0x02: ++ case 0x82: ++ refresh_clk = picos_to_clk(7800000); ++ break; ++ case 0x03: ++ case 0x83: ++ refresh_clk = picos_to_clk(31300000); ++ break; ++ case 0x04: ++ case 0x84: ++ refresh_clk = picos_to_clk(62500000); ++ break; ++ case 0x05: ++ case 0x85: ++ refresh_clk = picos_to_clk(125000000); ++ break; ++ default: ++ refresh_clk = 0x512; ++ break; + } + + /* + * Set BSTOPRE to 0x100 for page mode + * If auto-charge is used, set BSTOPRE = 0 + */ +- ddr->sdram_interval = ((tmp & 0x3fff) << 16) | 0x100; ++ ddr->sdram_interval = ((refresh_clk & 0x3fff) << 16) | 0x100; + debug("DDR:sdram_interval=0x%08x\n", ddr->sdram_interval); + +- /* +- * Is this an ECC DDR chip? ++ /* SS_EN = 0, source synchronous disable ++ * CLK_ADJST = 0, MCK/MCK# is launched aligned with addr/cmd + */ +-#if defined(CONFIG_DDR_ECC) +- if (spd.config == 0x02) { +- /* disable error detection */ +- ddr->err_disable = ~ECC_ERROR_ENABLE; ++ ddr->sdram_clk_cntl = 0x00000000; ++ debug("DDR:sdram_clk_cntl=0x%08x\n", ddr->sdram_clk_cntl); + +- /* set single bit error threshold to maximum value, +- * reset counter to zero */ +- ddr->err_sbe = (255 << ECC_ERROR_MAN_SBET_SHIFT) | +- (0 << ECC_ERROR_MAN_SBEC_SHIFT); +- } +- debug("DDR:err_disable=0x%08x\n", ddr->err_disable); +- debug("DDR:err_sbe=0x%08x\n", ddr->err_sbe); +-#endif + asm("sync;isync"); + +- udelay(500); ++ udelay(600); + + /* +- * SS_EN=1, +- * CLK_ADJST = 2-MCK/MCK_B, is lauched 1/2 of one SDRAM +- * clock cycle after address/command +- */ +- /*ddr->sdram_clk_cntl = 0x82000000;*/ +- ddr->sdram_clk_cntl = (DDR_SDRAM_CLK_CNTL_SS_EN|DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05); +- +- /* +- * Figure out the settings for the sdram_cfg register. Build up +- * the entire register in 'tmp' before writing since the write into ++ * Figure out the settings for the sdram_cfg register. Build up ++ * the value in 'sdram_cfg' before writing since the write into + * the register will actually enable the memory controller, and all + * settings must be done before enabling. + * + * sdram_cfg[0] = 1 (ddr sdram logic enable) + * sdram_cfg[1] = 1 (self-refresh-enable) + * sdram_cfg[6:7] = 2 (SDRAM type = DDR SDRAM) ++ * sdram_cfg[12] = 0 (32_BE =0 , 64 bit bus mode) ++ * sdram_cfg[13] = 0 (8_BE =0, 4-beat bursts) + */ +- tmp = 0xc2000000; ++ sdram_cfg = 0xC2000000; + +-#if defined (CONFIG_DDR_32BIT) +- /* in 32-Bit mode burst len is 8 beats */ +- tmp |= (SDRAM_CFG_32_BE | SDRAM_CFG_8_BE); +-#endif +- /* +- * sdram_cfg[3] = RD_EN - registered DIMM enable +- * A value of 0x26 indicates micron registered DIMMS (micron.com) +- */ +- if (spd.mod_attr == 0x26) { +- tmp |= 0x10000000; +- } ++ /* sdram_cfg[3] = RD_EN - registered DIMM enable */ ++ if (spd.mod_attr & 0x02) ++ sdram_cfg |= 0x10000000; ++ ++ /* The DIMM is 32bit width */ ++ if (spd.dataw_lsb == 0x20) ++ sdram_cfg |= 0x000C0000; ++ ++ ddrc_ecc_enable = 0; + + #if defined(CONFIG_DDR_ECC) +- /* +- * If the user wanted ECC (enabled via sdram_cfg[2]) +- */ ++ /* Enable ECC with sdram_cfg[2] */ + if (spd.config == 0x02) { +- tmp |= SDRAM_CFG_ECC_EN; ++ sdram_cfg |= 0x20000000; ++ ddrc_ecc_enable = 1; ++ /* disable error detection */ ++ ddr->err_disable = ~ECC_ERROR_ENABLE; ++ /* set single bit error threshold to maximum value, ++ * reset counter to zero */ ++ ddr->err_sbe = (255 << ECC_ERROR_MAN_SBET_SHIFT) | ++ (0 << ECC_ERROR_MAN_SBEC_SHIFT); + } ++ ++ debug("DDR:err_disable=0x%08x\n", ddr->err_disable); ++ debug("DDR:err_sbe=0x%08x\n", ddr->err_sbe); + #endif ++ printf(" DDRC ECC mode: %s\n", ddrc_ecc_enable ? "ON":"OFF"); + + #if defined(CONFIG_DDR_2T_TIMING) + /* + * Enable 2T timing by setting sdram_cfg[16]. + */ +- tmp |= SDRAM_CFG_2T_EN; ++ sdram_cfg |= SDRAM_CFG_2T_EN; + #endif +- +- ddr->sdram_cfg = tmp; ++ /* Enable controller, and GO! */ ++ ddr->sdram_cfg = sdram_cfg; + asm("sync;isync"); + udelay(500); + +@@ -392,8 +508,7 @@ long int spd_sdram() + } + #endif /* CONFIG_SPD_EEPROM */ + +- +-#if defined(CONFIG_DDR_ECC) ++#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRC) + /* + * Use timebase counter, get_timer() is not availabe + * at this point of initialization yet. +@@ -429,74 +544,48 @@ static __inline__ unsigned long get_tbms + /* #define CONFIG_DDR_ECC_INIT_VIA_DMA */ + void ddr_enable_ecc(unsigned int dram_size) + { +- uint *p; +- volatile immap_t *immap = (immap_t *)CFG_IMMRBAR; +- volatile ddr8349_t *ddr = &immap->ddr; ++ volatile immap_t *immap = (immap_t *)CFG_IMMR; ++ volatile ddr83xx_t *ddr= &immap->ddr; + unsigned long t_start, t_end; ++ register u64 *p; ++ register uint size; ++ unsigned int pattern[2]; + #if defined(CONFIG_DDR_ECC_INIT_VIA_DMA) + uint i; + #endif +- +- debug("Initialize a Cachline in DRAM\n"); + icache_enable(); +- +-#if defined(CONFIG_DDR_ECC_INIT_VIA_DMA) +- /* Initialise DMA for direct Transfers */ +- dma_init(); +-#endif +- + t_start = get_tbms(); ++ pattern[0] = 0xdeadbeef; ++ pattern[1] = 0xdeadbeef; + + #if !defined(CONFIG_DDR_ECC_INIT_VIA_DMA) +- debug("DDR init: Cache flush method\n"); +- for (p = 0; p < (uint *)(dram_size); p++) { +- if (((unsigned int)p & 0x1f) == 0) { +- ppcDcbz((unsigned long) p); +- } +- +- /* write pattern to cache and flush */ +- *p = (unsigned int)0xdeadbeef; +- +- if (((unsigned int)p & 0x1c) == 0x1c) { +- ppcDcbf((unsigned long) p); +- } ++ debug("ddr init: CPU FP write method\n"); ++ size = dram_size; ++ for (p = 0; p < (u64*)(size); p++) { ++ ppcDWstore((u32*)p, pattern); + } ++ __asm__ __volatile__ ("sync"); + #else +- printf("DDR init: DMA method\n"); +- for (p = 0; p < (uint *)(8 * 1024); p++) { +- /* zero one data cache line */ +- if (((unsigned int)p & 0x1f) == 0) { +- ppcDcbz((unsigned long)p); +- } +- +- /* write pattern to it and flush */ +- *p = (unsigned int)0xdeadbeef; +- +- if (((unsigned int)p & 0x1c) == 0x1c) { +- ppcDcbf((unsigned long)p); +- } ++ debug("ddr init: DMA method\n"); ++ size = 0x2000; ++ for (p = 0; p < (u64*)(size); p++) { ++ ppcDWstore((u32*)p, pattern); + } ++ __asm__ __volatile__ ("sync"); + +- /* 8K */ +- dma_xfer((uint *)0x2000, 0x2000, (uint *)0); +- /* 16K */ +- dma_xfer((uint *)0x4000, 0x4000, (uint *)0); +- /* 32K */ +- dma_xfer((uint *)0x8000, 0x8000, (uint *)0); +- /* 64K */ +- dma_xfer((uint *)0x10000, 0x10000, (uint *)0); +- /* 128k */ +- dma_xfer((uint *)0x20000, 0x20000, (uint *)0); +- /* 256k */ +- dma_xfer((uint *)0x40000, 0x40000, (uint *)0); +- /* 512k */ +- dma_xfer((uint *)0x80000, 0x80000, (uint *)0); +- /* 1M */ +- dma_xfer((uint *)0x100000, 0x100000, (uint *)0); +- /* 2M */ +- dma_xfer((uint *)0x200000, 0x200000, (uint *)0); +- /* 4M */ +- dma_xfer((uint *)0x400000, 0x400000, (uint *)0); ++ /* Initialise DMA for direct transfer */ ++ dma_init(); ++ /* Start DMA to transfer */ ++ dma_xfer((uint *)0x2000, 0x2000, (uint *)0); /* 8K */ ++ dma_xfer((uint *)0x4000, 0x4000, (uint *)0); /* 16K */ ++ dma_xfer((uint *)0x8000, 0x8000, (uint *)0); /* 32K */ ++ dma_xfer((uint *)0x10000, 0x10000, (uint *)0); /* 64K */ ++ dma_xfer((uint *)0x20000, 0x20000, (uint *)0); /* 128K */ ++ dma_xfer((uint *)0x40000, 0x40000, (uint *)0); /* 256K */ ++ dma_xfer((uint *)0x80000, 0x80000, (uint *)0); /* 512K */ ++ dma_xfer((uint *)0x100000, 0x100000, (uint *)0); /* 1M */ ++ dma_xfer((uint *)0x200000, 0x200000, (uint *)0); /* 2M */ ++ dma_xfer((uint *)0x400000, 0x400000, (uint *)0); /* 4M */ + + for (i = 1; i < dram_size / 0x800000; i++) { + dma_xfer((uint *)(0x800000*i), 0x800000, (uint *)0); +diff -Naupr u-boot-1.1.6/cpu/mpc83xx/speed.c u-boot-1.1.6-fsl-1/cpu/mpc83xx/speed.c +--- u-boot-1.1.6/cpu/mpc83xx/speed.c 2006-11-02 08:15:01.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/cpu/mpc83xx/speed.c 2006-11-30 12:34:13.000000000 -0600 +@@ -2,7 +2,7 @@ + * (C) Copyright 2000-2002 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * +- * Copyright 2004 Freescale Semiconductor, Inc. ++ * Copyright (C) 2004-2006 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. +@@ -21,11 +21,6 @@ + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA +- * +- * Change log: +- * +- * 20050101: Eran Liberty (liberty@freescale.com) +- * Initial file creating (porting from 85XX & 8260) + */ + + #include <common.h> +@@ -53,38 +48,38 @@ typedef enum { + + typedef struct { + mult_t core_csb_ratio; +- mult_t vco_divider; ++ mult_t vco_divider; + } corecnf_t; + + corecnf_t corecnf_tab[] = { +- { _byp, _byp}, /* 0x00 */ +- { _byp, _byp}, /* 0x01 */ +- { _byp, _byp}, /* 0x02 */ +- { _byp, _byp}, /* 0x03 */ +- { _byp, _byp}, /* 0x04 */ +- { _byp, _byp}, /* 0x05 */ +- { _byp, _byp}, /* 0x06 */ +- { _byp, _byp}, /* 0x07 */ +- { _1x, _x2}, /* 0x08 */ +- { _1x, _x4}, /* 0x09 */ +- { _1x, _x8}, /* 0x0A */ +- { _1x, _x8}, /* 0x0B */ +- {_1_5x, _x2}, /* 0x0C */ +- {_1_5x, _x4}, /* 0x0D */ +- {_1_5x, _x8}, /* 0x0E */ +- {_1_5x, _x8}, /* 0x0F */ +- { _2x, _x2}, /* 0x10 */ +- { _2x, _x4}, /* 0x11 */ +- { _2x, _x8}, /* 0x12 */ +- { _2x, _x8}, /* 0x13 */ +- {_2_5x, _x2}, /* 0x14 */ +- {_2_5x, _x4}, /* 0x15 */ +- {_2_5x, _x8}, /* 0x16 */ +- {_2_5x, _x8}, /* 0x17 */ +- { _3x, _x2}, /* 0x18 */ +- { _3x, _x4}, /* 0x19 */ +- { _3x, _x8}, /* 0x1A */ +- { _3x, _x8}, /* 0x1B */ ++ {_byp, _byp}, /* 0x00 */ ++ {_byp, _byp}, /* 0x01 */ ++ {_byp, _byp}, /* 0x02 */ ++ {_byp, _byp}, /* 0x03 */ ++ {_byp, _byp}, /* 0x04 */ ++ {_byp, _byp}, /* 0x05 */ ++ {_byp, _byp}, /* 0x06 */ ++ {_byp, _byp}, /* 0x07 */ ++ {_1x, _x2}, /* 0x08 */ ++ {_1x, _x4}, /* 0x09 */ ++ {_1x, _x8}, /* 0x0A */ ++ {_1x, _x8}, /* 0x0B */ ++ {_1_5x, _x2}, /* 0x0C */ ++ {_1_5x, _x4}, /* 0x0D */ ++ {_1_5x, _x8}, /* 0x0E */ ++ {_1_5x, _x8}, /* 0x0F */ ++ {_2x, _x2}, /* 0x10 */ ++ {_2x, _x4}, /* 0x11 */ ++ {_2x, _x8}, /* 0x12 */ ++ {_2x, _x8}, /* 0x13 */ ++ {_2_5x, _x2}, /* 0x14 */ ++ {_2_5x, _x4}, /* 0x15 */ ++ {_2_5x, _x8}, /* 0x16 */ ++ {_2_5x, _x8}, /* 0x17 */ ++ {_3x, _x2}, /* 0x18 */ ++ {_3x, _x4}, /* 0x19 */ ++ {_3x, _x8}, /* 0x1A */ ++ {_3x, _x8}, /* 0x1B */ + }; + + /* ----------------------------------------------------------------- */ +@@ -92,91 +87,64 @@ corecnf_t corecnf_tab[] = { + /* + * + */ +-int get_clocks (void) ++int get_clocks(void) + { +- volatile immap_t *im = (immap_t *)CFG_IMMRBAR; ++ volatile immap_t *im = (immap_t *) CFG_IMMR; + u32 pci_sync_in; +- u8 spmf; +- u8 clkin_div; ++ u8 spmf; ++ u8 clkin_div; + u32 sccr; + u32 corecnf_tab_index; +- u8 corepll; ++ u8 corepll; + u32 lcrr; + + u32 csb_clk; ++#if defined(CONFIG_MPC8349) + u32 tsec1_clk; + u32 tsec2_clk; +- u32 core_clk; + u32 usbmph_clk; + u32 usbdr_clk; +- u32 i2c_clk; ++#endif ++ u32 core_clk; ++ u32 i2c1_clk; ++ u32 i2c2_clk; + u32 enc_clk; + u32 lbiu_clk; + u32 lclk_clk; + u32 ddr_clk; ++#if defined (CONFIG_MPC8360) ++ u32 qepmf; ++ u32 qepdf; ++ u32 ddr_sec_clk; ++ u32 qe_clk; ++ u32 brg_clk; ++#endif + +- if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im) ++ if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32) im) + return -1; + +-#ifndef CFG_HRCW_HIGH +-# error "CFG_HRCW_HIGH must be defined in board config file" +-#endif /* CFG_HCWD_HIGH */ +- +-#if (CFG_HRCW_HIGH & HRCWH_PCI_HOST) +- +-# ifndef CONFIG_83XX_CLKIN +-# error "In PCI Host Mode, CONFIG_83XX_CLKIN must be defined in board config file" +-# endif /* CONFIG_83XX_CLKIN */ +-# ifdef CONFIG_83XX_PCICLK +-# warning "In PCI Host Mode, CONFIG_83XX_PCICLK in board config file is igonred" +-# endif /* CONFIG_83XX_PCICLK */ +- +- /* PCI Host Mode */ +- if (!(im->reset.rcwh & RCWH_PCIHOST)) { +- /* though RCWH_PCIHOST is defined in CFG_HRCW_HIGH +- * the im->reset.rcwhr PCI Host Mode is disabled +- * FIXME: findout if there is a way to issue some warning */ +- return -2; +- } +- if (im->clk.spmr & SPMR_CKID) { +- /* PCI Clock is half CONFIG_83XX_CLKIN */ +- pci_sync_in = CONFIG_83XX_CLKIN / 2; +- } +- else { +- pci_sync_in = CONFIG_83XX_CLKIN; +- } +- +-#else /* (CFG_HRCW_HIGH & HRCWH_PCI_HOST) */ ++ clkin_div = ((im->clk.spmr & SPMR_CKID) >> SPMR_CKID_SHIFT); + +-# ifdef CONFIG_83XX_CLKIN +-# warning "In PCI Agent Mode, CONFIG_83XX_CLKIN in board config file is igonred" +-# endif /* CONFIG_83XX_CLKIN */ +-# ifndef CONFIG_83XX_PCICLK +-# error "In PCI Agent Mode, CONFIG_83XX_PCICLK must be defined in board config file" +-# endif /* CONFIG_83XX_PCICLK */ +- +- /* PCI Agent Mode */ +- if (im->reset.rcwh & RCWH_PCIHOST) { +- /* though RCWH_PCIHOST is not defined in CFG_HRCW_HIGH +- * the im->reset.rcwhr PCI Host Mode is enabled */ +- return -3; ++ if (im->reset.rcwh & HRCWH_PCI_HOST) { ++#if defined(CONFIG_83XX_CLKIN) ++ pci_sync_in = CONFIG_83XX_CLKIN / (1 + clkin_div); ++#else ++ pci_sync_in = 0xDEADBEEF; ++#endif ++ } else { ++#if defined(CONFIG_83XX_PCICLK) ++ pci_sync_in = CONFIG_83XX_PCICLK; ++#else ++ pci_sync_in = 0xDEADBEEF; ++#endif + } +- pci_sync_in = CONFIG_83XX_PCICLK; + +-#endif /* (CFG_HRCW_HIGH | RCWH_PCIHOST) */ +- +- /* we have up to date pci_sync_in */ + spmf = ((im->reset.rcwl & RCWL_SPMF) >> RCWL_SPMF_SHIFT); +- clkin_div = ((im->clk.spmr & SPMR_CKID) >> SPMR_CKID_SHIFT); +- +- if ((im->reset.rcwl & RCWL_LBIUCM) || (im->reset.rcwl & RCWL_DDRCM)) { +- csb_clk = (pci_sync_in * spmf * (1 + clkin_div)) / 2; +- } +- else { +- csb_clk = pci_sync_in * spmf * (1 + clkin_div); +- } ++ csb_clk = pci_sync_in * (1 + clkin_div) * spmf; + + sccr = im->clk.sccr; ++ ++#if defined(CONFIG_MPC8349) + switch ((sccr & SCCR_TSEC1CM) >> SCCR_TSEC1CM_SHIFT) { + case 0: + tsec1_clk = 0; +@@ -212,25 +180,8 @@ int get_clocks (void) + /* unkown SCCR_TSEC2CM value */ + return -5; + } +- i2c_clk = tsec2_clk; + +- switch ((sccr & SCCR_ENCCM) >> SCCR_ENCCM_SHIFT) { +- case 0: +- enc_clk = 0; +- break; +- case 1: +- enc_clk = csb_clk; +- break; +- case 2: +- enc_clk = csb_clk / 2; +- break; +- case 3: +- enc_clk = csb_clk / 3; +- break; +- default: +- /* unkown SCCR_ENCCM value */ +- return -6; +- } ++ i2c1_clk = tsec2_clk; + + switch ((sccr & SCCR_USBMPHCM) >> SCCR_USBMPHCM_SHIFT) { + case 0: +@@ -268,14 +219,42 @@ int get_clocks (void) + return -8; + } + +- if (usbmph_clk != 0 +- && usbdr_clk != 0 +- && usbmph_clk != usbdr_clk ) { +- /* if USB MPH clock is not disabled and USB DR clock is not disabled than USB MPH & USB DR must have the same rate */ ++ if (usbmph_clk != 0 && usbdr_clk != 0 && usbmph_clk != usbdr_clk) { ++ /* if USB MPH clock is not disabled and ++ * USB DR clock is not disabled then ++ * USB MPH & USB DR must have the same rate ++ */ + return -9; + } ++#endif ++#if defined (CONFIG_MPC8360) ++ i2c1_clk = csb_clk; ++#endif ++ i2c2_clk = csb_clk; /* i2c-2 clk is equal to csb clk */ + +- lbiu_clk = csb_clk * (1 + ((im->reset.rcwl & RCWL_LBIUCM) >> RCWL_LBIUCM_SHIFT)); ++ switch ((sccr & SCCR_ENCCM) >> SCCR_ENCCM_SHIFT) { ++ case 0: ++ enc_clk = 0; ++ break; ++ case 1: ++ enc_clk = csb_clk; ++ break; ++ case 2: ++ enc_clk = csb_clk / 2; ++ break; ++ case 3: ++ enc_clk = csb_clk / 3; ++ break; ++ default: ++ /* unkown SCCR_ENCCM value */ ++ return -6; ++ } ++#if defined(CONFIG_MPC8349) || defined(CONFIG_MPC8360) ++ lbiu_clk = csb_clk * ++ (1 + ((im->reset.rcwl & RCWL_LBIUCM) >> RCWL_LBIUCM_SHIFT)); ++#else ++#error Unknown MPC83xx chip ++#endif + lcrr = (im->lbus.lcrr & LCRR_CLKDIV) >> LCRR_CLKDIV_SHIFT; + switch (lcrr) { + case 2: +@@ -287,12 +266,20 @@ int get_clocks (void) + /* unknown lcrr */ + return -10; + } +- +- ddr_clk = csb_clk * (1 + ((im->reset.rcwl & RCWL_DDRCM) >> RCWL_DDRCM_SHIFT)); +- ++#if defined(CONFIG_MPC8349) || defined(CONFIG_MPC8360) ++ ddr_clk = csb_clk * ++ (1 + ((im->reset.rcwl & RCWL_DDRCM) >> RCWL_DDRCM_SHIFT)); + corepll = (im->reset.rcwl & RCWL_COREPLL) >> RCWL_COREPLL_SHIFT; ++#if defined (CONFIG_MPC8360) ++ ddr_sec_clk = csb_clk * (1 + ++ ((im->reset.rcwl & RCWL_LBIUCM) >> RCWL_LBIUCM_SHIFT)); ++#endif ++#else ++#error Unknown MPC83xx chip ++#endif ++ + corecnf_tab_index = ((corepll & 0x1F) << 2) | ((corepll & 0x60) >> 5); +- if (corecnf_tab_index > (sizeof(corecnf_tab)/sizeof(corecnf_t)) ) { ++ if (corecnf_tab_index > (sizeof(corecnf_tab) / sizeof(corecnf_t))) { + /* corecnf_tab_index is too high, possibly worng value */ + return -11; + } +@@ -309,7 +296,7 @@ int get_clocks (void) + core_clk = 2 * csb_clk; + break; + case _2_5x: +- core_clk = ( 5 * csb_clk) / 2; ++ core_clk = (5 * csb_clk) / 2; + break; + case _3x: + core_clk = 3 * csb_clk; +@@ -319,46 +306,69 @@ int get_clocks (void) + return -12; + } + +- gd->csb_clk = csb_clk ; +- gd->tsec1_clk = tsec1_clk ; +- gd->tsec2_clk = tsec2_clk ; +- gd->core_clk = core_clk ; ++#if defined (CONFIG_MPC8360) ++ qepmf = (im->reset.rcwl & RCWL_CEPMF) >> RCWL_CEPMF_SHIFT; ++ qepdf = (im->reset.rcwl & RCWL_CEPDF) >> RCWL_CEPDF_SHIFT; ++ qe_clk = (pci_sync_in * qepmf) / (1 + qepdf); ++ brg_clk = qe_clk / 2; ++#endif ++ ++ gd->csb_clk = csb_clk; ++#if defined(CONFIG_MPC8349) ++ gd->tsec1_clk = tsec1_clk; ++ gd->tsec2_clk = tsec2_clk; + gd->usbmph_clk = usbmph_clk; +- gd->usbdr_clk = usbdr_clk ; +- gd->i2c_clk = i2c_clk ; +- gd->enc_clk = enc_clk ; +- gd->lbiu_clk = lbiu_clk ; +- gd->lclk_clk = lclk_clk ; +- gd->ddr_clk = ddr_clk ; +- gd->pci_clk = pci_sync_in; +- ++ gd->usbdr_clk = usbdr_clk; ++#endif ++ gd->core_clk = core_clk; ++ gd->i2c1_clk = i2c1_clk; ++ gd->i2c2_clk = i2c2_clk; ++ gd->enc_clk = enc_clk; ++ gd->lbiu_clk = lbiu_clk; ++ gd->lclk_clk = lclk_clk; ++ gd->ddr_clk = ddr_clk; ++#if defined (CONFIG_MPC8360) ++ gd->ddr_sec_clk = ddr_sec_clk; ++ gd->qe_clk = qe_clk; ++ gd->brg_clk = brg_clk; ++#endif + gd->cpu_clk = gd->core_clk; +- gd->bus_clk = gd->lbiu_clk; ++ gd->bus_clk = gd->csb_clk; + return 0; ++ + } + + /******************************************** + * get_bus_freq + * return system bus freq in Hz + *********************************************/ +-ulong get_bus_freq (ulong dummy) ++ulong get_bus_freq(ulong dummy) + { + return gd->csb_clk; + } + +-int print_clock_conf (void) ++int print_clock_conf(void) + { + printf("Clock configuration:\n"); +- printf(" Coherent System Bus: %4d MHz\n",gd->csb_clk/1000000); +- printf(" Core: %4d MHz\n",gd->core_clk/1000000); +- debug(" Local Bus Controller:%4d MHz\n",gd->lbiu_clk/1000000); +- printf(" Local Bus: %4d MHz\n",gd->lclk_clk/1000000); +- debug(" DDR: %4d MHz\n",gd->ddr_clk/1000000); +- debug(" I2C: %4d MHz\n",gd->i2c_clk/1000000); +- debug(" TSEC1: %4d MHz\n",gd->tsec1_clk/1000000); +- debug(" TSEC2: %4d MHz\n",gd->tsec2_clk/1000000); +- debug(" USB MPH: %4d MHz\n",gd->usbmph_clk/1000000); +- debug(" USB DR: %4d MHz\n",gd->usbdr_clk/1000000); +- ++ printf(" Coherent System Bus: %4d MHz\n", gd->csb_clk / 1000000); ++ printf(" Core: %4d MHz\n", gd->core_clk / 1000000); ++#if defined (CONFIG_MPC8360) ++ printf(" QE: %4d MHz\n", gd->qe_clk / 1000000); ++#endif ++ printf(" Local Bus Controller:%4d MHz\n", gd->lbiu_clk / 1000000); ++ printf(" Local Bus: %4d MHz\n", gd->lclk_clk / 1000000); ++ printf(" DDR: %4d MHz\n", gd->ddr_clk / 1000000); ++#if defined (CONFIG_MPC8360) ++ printf(" DDR Secondary: %4d MHz\n", gd->ddr_sec_clk / 1000000); ++#endif ++ printf(" SEC: %4d MHz\n", gd->enc_clk / 1000000); ++ printf(" I2C1: %4d MHz\n", gd->i2c1_clk / 1000000); ++ printf(" I2C2: %4d MHz\n", gd->i2c2_clk / 1000000); ++#if defined(CONFIG_MPC8349) ++ printf(" TSEC1: %4d MHz\n", gd->tsec1_clk / 1000000); ++ printf(" TSEC2: %4d MHz\n", gd->tsec2_clk / 1000000); ++ printf(" USB MPH: %4d MHz\n", gd->usbmph_clk / 1000000); ++ printf(" USB DR: %4d MHz\n", gd->usbdr_clk / 1000000); ++#endif + return 0; + } +diff -Naupr u-boot-1.1.6/cpu/mpc83xx/start.S u-boot-1.1.6-fsl-1/cpu/mpc83xx/start.S +--- u-boot-1.1.6/cpu/mpc83xx/start.S 2006-11-02 08:15:01.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/cpu/mpc83xx/start.S 2006-11-10 11:24:29.000000000 -0600 +@@ -2,7 +2,7 @@ + * Copyright (C) 1998 Dan Malek <dmalek@jlc.net> + * Copyright (C) 1999 Magnus Damm <kieraypc01.p.y.kie.era.ericsson.se> + * Copyright (C) 2000, 2001,2002 Wolfgang Denk <wd@denx.de> +- * Copyright 2004 Freescale Semiconductor, Inc. ++ * Copyright Freescale Semiconductor, Inc. 2004, 2006. All rights reserved. + * + * See file CREDITS for list of people who contributed to this + * project. +@@ -104,9 +104,9 @@ version_string: + #ifndef CONFIG_DEFAULT_IMMR + #error CONFIG_DEFAULT_IMMR must be defined + #endif /* CFG_DEFAULT_IMMR */ +-#ifndef CFG_IMMRBAR +-#define CFG_IMMRBAR CONFIG_DEFAULT_IMMR +-#endif /* CFG_IMMRBAR */ ++#ifndef CFG_IMMR ++#define CFG_IMMR CONFIG_DEFAULT_IMMR ++#endif /* CFG_IMMR */ + + /* + * After configuration, a system reset exception is executed using the +@@ -152,8 +152,8 @@ boot_cold: /* time t 3 */ + nop + boot_warm: /* time t 5 */ + mfmsr r5 /* save msr contents */ +- lis r3, CFG_IMMRBAR@h +- ori r3, r3, CFG_IMMRBAR@l ++ lis r3, CFG_IMMR@h ++ ori r3, r3, CFG_IMMR@l + stw r3, IMMRBAR(r4) + + /* Initialise the E300 processor core */ +@@ -226,7 +226,7 @@ in_flash: + GET_GOT /* initialize GOT access */ + + /* r3: IMMR */ +- lis r3, CFG_IMMRBAR@h ++ lis r3, CFG_IMMR@h + /* run low-level CPU init code (in Flash)*/ + bl cpu_init_f + +@@ -446,7 +446,7 @@ init_e300_core: /* time t 10 */ + mtspr SRR1, r3 /* Make SRR1 match MSR */ + + +- lis r3, CFG_IMMRBAR@h ++ lis r3, CFG_IMMR@h + #if defined(CONFIG_WATCHDOG) + /* Initialise the Wathcdog values and reset it (if req) */ + /*------------------------------------------------------*/ +@@ -870,6 +870,18 @@ ppcDcbz: + dcbz r0,r3 + blr + ++ .globl ppcDWstore ++ppcDWstore: ++ lfd 1, 0(r4) ++ stfd 1, 0(r3) ++ blr ++ ++ .globl ppcDWload ++ppcDWload: ++ lfd 1, 0(r3) ++ stfd 1, 0(r4) ++ blr ++ + /*-------------------------------------------------------------------*/ + + /* +@@ -1189,7 +1201,7 @@ map_flash_by_law1: + /* When booting from ROM (Flash or EPROM), clear the */ + /* Address Mask in OR0 so ROM appears everywhere */ + /*----------------------------------------------------*/ +- lis r3, (CFG_IMMRBAR)@h /* r3 <= CFG_IMMRBAR */ ++ lis r3, (CFG_IMMR)@h /* r3 <= CFG_IMMR */ + lwz r4, OR0@l(r3) + li r5, 0x7fff /* r5 <= 0x00007FFFF */ + and r4, r4, r5 +@@ -1214,8 +1226,15 @@ map_flash_by_law1: + lis r4, (CFG_FLASH_BASE)@h + ori r4, r4, (CFG_FLASH_BASE)@l + stw r4, LBLAWBAR1(r3) /* LBLAWBAR1 <= CFG_FLASH_BASE */ +- lis r4, (0x80000016)@h +- ori r4, r4, (0x80000016)@l ++ ++ /* Store 0x80000012 + log2(CFG_FLASH_SIZE) into LBLAWAR1 */ ++ lis r4, (0x80000012)@h ++ ori r4, r4, (0x80000012)@l ++ li r5, CFG_FLASH_SIZE ++1: srawi. r5, r5, 1 /* r5 = r5 >> 1 */ ++ addi r4, r4, 1 ++ bne 1b ++ + stw r4, LBLAWAR1(r3) /* LBLAWAR1 <= 8MB Flash Size */ + blr + +@@ -1234,17 +1253,23 @@ remap_flash_by_law0: + stw r5, BR0(r3) /* r5 <= (CFG_FLASH_BASE & 0xFFFF8000) | (BR0 & 0x00007FFF) */ + + lwz r4, OR0(r3) +- lis r5, 0xFF80 /* 8M */ ++ lis r5, ~((CFG_FLASH_SIZE << 4) - 1) + or r4, r4, r5 +- stw r4, OR0(r3) /* OR0 <= OR0 | 0xFF800000 */ ++ stw r4, OR0(r3) + + lis r4, (CFG_FLASH_BASE)@h + ori r4, r4, (CFG_FLASH_BASE)@l + stw r4, LBLAWBAR0(r3) /* LBLAWBAR0 <= CFG_FLASH_BASE */ + +- lis r4, (0x80000016)@h +- ori r4, r4, (0x80000016)@l +- stw r4, LBLAWAR0(r3) /* LBLAWAR0 <= 8MB Flash Size */ ++ /* Store 0x80000012 + log2(CFG_FLASH_SIZE) into LBLAWAR0 */ ++ lis r4, (0x80000012)@h ++ ori r4, r4, (0x80000012)@l ++ li r5, CFG_FLASH_SIZE ++1: srawi. r5, r5, 1 /* r5 = r5 >> 1 */ ++ addi r4, r4, 1 ++ bne 1b ++ stw r4, LBLAWAR0(r3) /* LBLAWAR0 <= Flash Size */ ++ + + xor r4, r4, r4 + stw r4, LBLAWBAR1(r3) +diff -Naupr u-boot-1.1.6/cpu/mpc83xx/traps.c u-boot-1.1.6-fsl-1/cpu/mpc83xx/traps.c +--- u-boot-1.1.6/cpu/mpc83xx/traps.c 2006-11-02 08:15:01.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/cpu/mpc83xx/traps.c 2006-11-30 12:34:13.000000000 -0600 +@@ -1,5 +1,8 @@ + /* +- * linux/arch/ppc/kernel/traps.c ++ * (C) Copyright 2000 ++ * Wolfgang Denk, DENX Software Engineering, wd@denx.de. ++ * ++ * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as +@@ -15,19 +18,6 @@ + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA +- * +- * Change log: +- * +- * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) +- * +- * Modified by Cort Dougan (cort@cs.nmt.edu) +- * and Paul Mackerras (paulus@cs.anu.edu.au) +- * +- * (C) Copyright 2000 +- * Wolfgang Denk, DENX Software Engineering, wd@denx.de. +- * +- * 20050101: Eran Liberty (liberty@freescale.com) +- * Initial file creating (porting from 85XX & 8260) + */ + + /* +diff -Naupr u-boot-1.1.6/cpu/ppc4xx/405gp_pci.c u-boot-1.1.6-fsl-1/cpu/ppc4xx/405gp_pci.c +--- u-boot-1.1.6/cpu/ppc4xx/405gp_pci.c 2006-11-02 08:15:01.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/cpu/ppc4xx/405gp_pci.c 2006-11-30 12:34:13.000000000 -0600 +@@ -475,7 +475,11 @@ void pci_440_init (struct pci_controller + pci_set_region(hose->regions + reg_num++, + CFG_PCI_TARGBASE, + CFG_PCI_MEMBASE, ++#ifdef CFG_PCI_MEMSIZE ++ CFG_PCI_MEMSIZE, ++#else + 0x10000000, ++#endif + PCI_REGION_MEM ); + + #if defined(CONFIG_PCI_SYS_MEM_BUS) && defined(CONFIG_PCI_SYS_MEM_PHYS) && \ +diff -Naupr u-boot-1.1.6/cpu/ppc4xx/4xx_enet.c u-boot-1.1.6-fsl-1/cpu/ppc4xx/4xx_enet.c +--- u-boot-1.1.6/cpu/ppc4xx/4xx_enet.c 2006-11-02 08:15:01.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/cpu/ppc4xx/4xx_enet.c 2006-11-30 12:34:13.000000000 -0600 +@@ -264,10 +264,10 @@ int ppc_4xx_eth_setup_bridge(int devnum, + bis->bi_phymode[3] = BI_PHYMODE_ZMII; + break; + case 2: +- zmiifer = ZMII_FER_SMII << ZMII_FER_V(0); +- zmiifer = ZMII_FER_SMII << ZMII_FER_V(1); +- zmiifer = ZMII_FER_SMII << ZMII_FER_V(2); +- zmiifer = ZMII_FER_SMII << ZMII_FER_V(3); ++ zmiifer |= ZMII_FER_SMII << ZMII_FER_V(0); ++ zmiifer |= ZMII_FER_SMII << ZMII_FER_V(1); ++ zmiifer |= ZMII_FER_SMII << ZMII_FER_V(2); ++ zmiifer |= ZMII_FER_SMII << ZMII_FER_V(3); + bis->bi_phymode[0] = BI_PHYMODE_ZMII; + bis->bi_phymode[1] = BI_PHYMODE_ZMII; + bis->bi_phymode[2] = BI_PHYMODE_ZMII; +@@ -470,8 +470,7 @@ static int ppc_4xx_eth_init (struct eth_ + #else + if ((devnum == 0) || (devnum == 1)) { + out32 (ZMII_FER, (ZMII_FER_SMII | ZMII_FER_MDI) << ZMII_FER_V (devnum)); +- } +- else { /* ((devnum == 2) || (devnum == 3)) */ ++ } else { /* ((devnum == 2) || (devnum == 3)) */ + out32 (ZMII_FER, ZMII_FER_MDI << ZMII_FER_V (devnum)); + out32 (RGMII_FER, ((RGMII_FER_RGMII << RGMII_FER_V (2)) | + (RGMII_FER_RGMII << RGMII_FER_V (3)))); +@@ -561,22 +560,7 @@ static int ppc_4xx_eth_init (struct eth_ + * otherwise, just check the speeds & feeds + */ + if (hw_p->first_init == 0) { +-#if defined(CONFIG_88E1111_CLK_DELAY) +- /* +- * On some boards (e.g. ALPR) the Marvell 88E1111 PHY needs +- * the "RGMII transmit timing control" and "RGMII receive +- * timing control" bits set, so that Gbit communication works +- * without problems. +- * Also set the "Transmitter disable" to 1 to enable the +- * transmitter. +- * After setting these bits a soft-reset must occur for this +- * change to become active. +- */ +- miiphy_read (dev->name, reg, 0x14, ®_short); +- reg_short |= (1 << 7) | (1 << 1) | (1 << 0); +- miiphy_write (dev->name, reg, 0x14, reg_short); +-#endif +-#if defined(CONFIG_M88E1111_PHY) /* test-only: merge with CONFIG_88E1111_CLK_DELAY !!! */ ++#if defined(CONFIG_M88E1111_PHY) + miiphy_write (dev->name, reg, 0x14, 0x0ce3); + miiphy_write (dev->name, reg, 0x18, 0x4101); + miiphy_write (dev->name, reg, 0x09, 0x0e00); +@@ -808,7 +792,7 @@ static int ppc_4xx_eth_init (struct eth_ + hw_p->rx[i].ctrl |= MAL_RX_CTRL_EMPTY | MAL_RX_CTRL_INTR; + hw_p->rx_ready[i] = -1; + #if 0 +- printf ("RX_BUFF %d @ 0x%08lx\n", i, (ulong) rx[i].data_ptr); ++ printf ("RX_BUFF %d @ 0x%08lx\n", i, (ulong) hw_p->rx[i].data_ptr); + #endif + } + +diff -Naupr u-boot-1.1.6/cpu/ppc4xx/cpu.c u-boot-1.1.6-fsl-1/cpu/ppc4xx/cpu.c +--- u-boot-1.1.6/cpu/ppc4xx/cpu.c 2006-11-02 08:15:01.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/cpu/ppc4xx/cpu.c 2006-12-06 10:33:49.000000000 -0600 +@@ -41,6 +41,10 @@ + DECLARE_GLOBAL_DATA_PTR; + #endif + ++#if defined(CONFIG_BOARD_RESET) ++void board_reset(void); ++#endif ++ + #if defined(CONFIG_440) + #define FREQ_EBC (sys_info.freqEPB) + #else +@@ -336,6 +340,10 @@ int checkcpu (void) + puts("SP Rev. B"); + break; + ++ case PVR_440SP_RC: ++ puts("SP Rev. C"); ++ break; ++ + case PVR_440SPe_RA: + puts("SPe Rev. A"); + break; +@@ -422,23 +430,19 @@ int ppc440spe_revB() { + + int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) + { +-#if defined(CONFIG_YOSEMITE) || defined(CONFIG_YELLOWSTONE) +- /*give reset to BCSR*/ +- *(unsigned char*)(CFG_BCSR_BASE | 0x06) = 0x09; +- ++#if defined(CONFIG_BOARD_RESET) ++ board_reset(); ++#else ++#if defined(CFG_4xx_RESET_TYPE) ++ mtspr(dbcr0, CFG_4xx_RESET_TYPE << 28); + #else +- + /* + * Initiate system reset in debug control register DBCR + */ +- __asm__ __volatile__("lis 3, 0x3000" ::: "r3"); +-#if defined(CONFIG_440) +- __asm__ __volatile__("mtspr 0x134, 3"); +-#else +- __asm__ __volatile__("mtspr 0x3f2, 3"); +-#endif ++ mtspr(dbcr0, 0x30000000); ++#endif /* defined(CFG_4xx_RESET_TYPE) */ ++#endif /* defined(CONFIG_BOARD_RESET) */ + +-#endif/* defined(CONFIG_YOSEMITE) || defined(CONFIG_YELLOWSTONE)*/ + return 1; + } + +diff -Naupr u-boot-1.1.6/cpu/ppc4xx/cpu_init.c u-boot-1.1.6-fsl-1/cpu/ppc4xx/cpu_init.c +--- u-boot-1.1.6/cpu/ppc4xx/cpu_init.c 2006-11-02 08:15:01.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/cpu/ppc4xx/cpu_init.c 2006-11-30 12:34:13.000000000 -0600 +@@ -321,6 +321,10 @@ cpu_init_f (void) + #else + val |= 0xf0000000; /* generate system reset after 2.684 seconds */ + #endif ++#if defined(CFG_4xx_RESET_TYPE) ++ val &= ~0x30000000; /* clear WRC bits */ ++ val |= CFG_4xx_RESET_TYPE << 28; /* set board specific WRC type */ ++#endif + mtspr(tcr, val); + + val = mfspr(tsr); +diff -Naupr u-boot-1.1.6/cpu/ppc4xx/sdram.c u-boot-1.1.6-fsl-1/cpu/ppc4xx/sdram.c +--- u-boot-1.1.6/cpu/ppc4xx/sdram.c 2006-11-02 08:15:01.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/cpu/ppc4xx/sdram.c 2006-11-30 12:34:13.000000000 -0600 +@@ -351,6 +351,14 @@ long int initdram(int board_type) + int i; + int tr1_bank1; + ++#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || defined(CONFIG_440GR) || defined(CONFIG_440SP) ++ /* ++ * Soft-reset SDRAM controller. ++ */ ++ mtsdr(sdr_srst, SDR0_SRST_DMC); ++ mtsdr(sdr_srst, 0x00000000); ++#endif ++ + for (i=0; i<N_MB0CF; i++) { + /* + * Disable memory controller. +diff -Naupr u-boot-1.1.6/cpu/ppc4xx/start.S u-boot-1.1.6-fsl-1/cpu/ppc4xx/start.S +--- u-boot-1.1.6/cpu/ppc4xx/start.S 2006-11-02 08:15:01.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/cpu/ppc4xx/start.S 2006-11-30 12:34:13.000000000 -0600 +@@ -204,6 +204,18 @@ _start_440: + mfspr r1,mcsr + mtspr mcsr,r1 + #endif ++ ++ /*----------------------------------------------------------------*/ ++ /* CCR0 init */ ++ /*----------------------------------------------------------------*/ ++ /* Disable store gathering & broadcast, guarantee inst/data ++ * cache block touch, force load/store alignment ++ * (see errata 1.12: 440_33) ++ */ ++ lis r1,0x0030 /* store gathering & broadcast disable */ ++ ori r1,r1,0x6000 /* cache touch */ ++ mtspr ccr0,r1 ++ + /*----------------------------------------------------------------*/ + /* Initialize debug */ + /*----------------------------------------------------------------*/ +@@ -225,17 +237,6 @@ _start_440: + mtspr dbsr,r1 /* Clear all valid bits */ + skip_debug_init: + +- /*----------------------------------------------------------------*/ +- /* CCR0 init */ +- /*----------------------------------------------------------------*/ +- /* Disable store gathering & broadcast, guarantee inst/data +- * cache block touch, force load/store alignment +- * (see errata 1.12: 440_33) +- */ +- lis r1,0x0030 /* store gathering & broadcast disable */ +- ori r1,r1,0x6000 /* cache touch */ +- mtspr ccr0,r1 +- + #if defined (CONFIG_440SPE) + /*----------------------------------------------------------------+ + | Initialize Core Configuration Reg1. +diff -Naupr u-boot-1.1.6/CREDITS u-boot-1.1.6-fsl-1/CREDITS +--- u-boot-1.1.6/CREDITS 2006-11-02 08:15:01.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/CREDITS 2006-11-10 11:24:28.000000000 -0600 +@@ -465,3 +465,8 @@ N: James MacAulay + E: james.macaulay@amirix.com + D: Suppport for Amirix AP1000 + W: www.amirix.com ++ ++N: Timur Tabi ++E: timur@freescale.com ++D: Support for MPC8349E-mITX ++W: www.freescale.com +diff -Naupr u-boot-1.1.6/doc/README.mpc8360emds u-boot-1.1.6-fsl-1/doc/README.mpc8360emds +--- u-boot-1.1.6/doc/README.mpc8360emds 1969-12-31 18:00:00.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/doc/README.mpc8360emds 2006-12-06 10:33:49.000000000 -0600 +@@ -0,0 +1,126 @@ ++Freescale MPC8360EMDS Board ++----------------------------------------- ++1. Board Switches and Jumpers ++1.0 There are four Dual-In-Line Packages(DIP) Switches on MPC8360EMDS board ++ For some reason, the HW designers describe the switch settings ++ in terms of 0 and 1, and then map that to physical switches where ++ the label "On" refers to logic 0 and "Off" is logic 1. ++ ++ Switch bits are numbered 1 through, like, 4 6 8 or 10, but the ++ bits may contribute to signals that are numbered based at 0, ++ and some of those signals may be high-bit-number-0 too. Heed ++ well the names and labels and do not get confused. ++ ++ "Off" == 1 ++ "On" == 0 ++ ++ SW18 is switch 18 as silk-screened onto the board. ++ SW4[8] is the bit labled 8 on Switch 4. ++ SW2[1:6] refers to bits labeled 1 through 6 in order on switch 2. ++ SW3[7:1] refers to bits labeled 7 through 1 in order on switch 3. ++ SW3[1:8]= 0000_0001 refers to bits labeled 1 through 6 is set as "On" ++ and bits labeled 8 is set as "Off". ++ ++1.1 For the MPC8360E PB PROTO Board ++ ++ First, make sure the board default setting is consistent with the ++ document shipped with your board. Then apply the following setting: ++ SW3[1-8]= 0000_0100 (HRCW setting value is performed on local bus) ++ SW4[1-8]= 0011_0000 (Flash boot on local bus) ++ SW9[1-8]= 0110_0110 (PCI Mode enabled. HRCW is read from FLASH) ++ SW10[1-8]= 0000_1000 (core PLL setting) ++ SW11[1-8]= 0000_0100 (SW11 is on the another side of the board) ++ JP6 1-2 ++ on board Oscillator: 66M ++ ++ ++2. Memory Map ++ ++2.1. The memory map should look pretty much like this: ++ ++ 0x0000_0000 0x7fff_ffff DDR 2G ++ 0x8000_0000 0x8fff_ffff PCI MEM prefetch 256M ++ 0x9000_0000 0x9fff_ffff PCI MEM non-prefetch 256M ++ 0xc000_0000 0xdfff_ffff Empty 512M ++ 0xe000_0000 0xe01f_ffff Int Mem Reg Space 2M ++ 0xe020_0000 0xe02f_ffff Empty 1M ++ 0xe030_0000 0xe03f_ffff PCI IO 1M ++ 0xe040_0000 0xefff_ffff Empty 252M ++ 0xf000_0000 0xf3ff_ffff Local Bus SDRAM 64M ++ 0xf400_0000 0xf7ff_ffff Empty 64M ++ 0xf800_0000 0xf800_7fff BCSR on CS1 32K ++ 0xf800_8000 0xf800_ffff PIB CS4 32K ++ 0xf801_0000 0xf801_7fff PIB CS5 32K ++ 0xfe00_0000 0xfeff_ffff FLASH on CS0 16M ++ ++ ++3. Definitions ++ ++3.1 Explanation of NEW definitions in: ++ ++ include/configs/MPC8360EMDS.h ++ ++ CONFIG_MPC83XX MPC83xx family for both MPC8349 and MPC8360 ++ CONFIG_MPC8360 MPC8360 specific ++ CONFIG_MPC8360EMDS MPC8360EMDS board specific ++ ++4. Compilation ++ ++ Assuming you're using BASH shell: ++ ++ export CROSS_COMPILE=your-cross-compile-prefix ++ cd u-boot ++ make distclean ++ make MPC8360EMDS_config ++ make ++ ++ MPC8360 support PCI in host and slave mode. ++ ++ To make u-boot support PCI host 66M : ++ 1) DIP SW support PCI mode as described in Section 1.1. ++ 2) Make MPC8360EMDS_HOST_66_config ++ ++ To make u-boot support PCI host 33M : ++ 1) DIP SW setting is similar as Section 1.1, except for SW3[4] is 1 ++ 2) Make MPC8360EMDS_HOST_33_config ++ ++ To make u-boot support PCI slave 66M : ++ 1) DIP SW setting is similar as Section 1.1, except for SW9[3] is 1 ++ 2) Make MPC8360EMDS_SLAVE_config ++ ++ ++5. Downloading and Flashing Images ++ ++5.0 Download over serial line using Kermit: ++ ++ loadb ++ [Drop to kermit: ++ ^\c ++ send <u-boot-bin-image> ++ c ++ ] ++ ++ ++ Or via tftp: ++ ++ tftp 10000 u-boot.bin ++ ++5.1 Reflash U-boot Image using U-boot ++ ++ tftp 20000 u-boot.bin ++ protect off fef00000 fef3ffff ++ erase fef00000 fef3ffff ++ ++ cp.b 20000 fef00000 xxxx ++ ++ or ++ ++ cp.b 20000 fef00000 3ffff ++ ++ ++You have to supply the correct byte count with 'xxxx' from the TFTP result log. ++Maybe 3ffff will work too, that corresponds to the erased sectors. ++ ++ ++6. Notes ++ 1) The console baudrate for MPC8360EMDS is 115200bps. +diff -Naupr u-boot-1.1.6/drivers/cfi_flash.c u-boot-1.1.6-fsl-1/drivers/cfi_flash.c +--- u-boot-1.1.6/drivers/cfi_flash.c 2006-11-02 08:15:01.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/drivers/cfi_flash.c 2006-11-30 12:34:13.000000000 -0600 +@@ -4,11 +4,12 @@ + * + * Copyright (C) 2003 Arabella Software Ltd. + * Yuli Barcohen <yuli@arabellasw.com> +- * Modified to work with AMD flashes + * + * Copyright (C) 2004 + * Ed Okerson +- * Modified to work with little-endian systems. ++ * ++ * Copyright (C) 2006 ++ * Tolunay Orkun <listmember@orkun.us> + * + * See file CREDITS for list of people who contributed to this + * project. +@@ -28,17 +29,6 @@ + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * +- * History +- * 01/20/2004 - combined variants of original driver. +- * 01/22/2004 - Write performance enhancements for parallel chips (Tolunay) +- * 01/23/2004 - Support for x8/x16 chips (Rune Raknerud) +- * 01/27/2004 - Little endian support Ed Okerson +- * +- * Tested Architectures +- * Port Width Chip Width # of banks Flash Chip Board +- * 32 16 1 28F128J3 seranoa/eagle +- * 64 16 1 28F128J3 seranoa/falcon +- * + */ + + /* The DEBUG define must be before common to enable debugging */ +@@ -54,21 +44,16 @@ + * This file implements a Common Flash Interface (CFI) driver for U-Boot. + * The width of the port and the width of the chips are determined at initialization. + * These widths are used to calculate the address for access CFI data structures. +- * It has been tested on an Intel Strataflash implementation and AMD 29F016D. + * + * References + * JEDEC Standard JESD68 - Common Flash Interface (CFI) + * JEDEC Standard JEP137-A Common Flash Interface (CFI) ID Codes + * Intel Application Note 646 Common Flash Interface (CFI) and Command Sets + * Intel 290667-008 3 Volt Intel StrataFlash Memory datasheet ++ * AMD CFI Specification, Release 2.0 December 1, 2001 ++ * AMD/Spansion Application Note: Migration from Single-byte to Three-byte ++ * Device IDs, Publication Number 25538 Revision A, November 8, 2001 + * +- * TODO +- * +- * Use Primary Extended Query table (PRI) and Alternate Algorithm Query +- * Table (ALT) to determine if protection is available +- * +- * Add support for other command sets Use the PRI and ALT to determine command set +- * Verify erase and program timeouts. + */ + + #ifndef CFG_FLASH_BANKS_LIST +@@ -114,6 +99,10 @@ + #define AMD_ADDR_START ((info->portwidth == FLASH_CFI_8BIT) ? 0xAAA : 0x555) + #define AMD_ADDR_ACK ((info->portwidth == FLASH_CFI_8BIT) ? 0x555 : 0x2AA) + ++#define FLASH_OFFSET_MANUFACTURER_ID 0x00 ++#define FLASH_OFFSET_DEVICE_ID 0x01 ++#define FLASH_OFFSET_DEVICE_ID2 0x0E ++#define FLASH_OFFSET_DEVICE_ID3 0x0F + #define FLASH_OFFSET_CFI 0x55 + #define FLASH_OFFSET_CFI_RESP 0x10 + #define FLASH_OFFSET_PRIMARY_VENDOR 0x13 +@@ -135,25 +124,20 @@ + #define FLASH_OFFSET_USER_PROTECTION 0x85 + #define FLASH_OFFSET_INTEL_PROTECTION 0x81 + +- +-#define FLASH_MAN_CFI 0x01000000 +- +-#define CFI_CMDSET_NONE 0 +-#define CFI_CMDSET_INTEL_EXTENDED 1 +-#define CFI_CMDSET_AMD_STANDARD 2 +-#define CFI_CMDSET_INTEL_STANDARD 3 +-#define CFI_CMDSET_AMD_EXTENDED 4 +-#define CFI_CMDSET_MITSU_STANDARD 256 +-#define CFI_CMDSET_MITSU_EXTENDED 257 +-#define CFI_CMDSET_SST 258 +- ++#define CFI_CMDSET_NONE 0 ++#define CFI_CMDSET_INTEL_EXTENDED 1 ++#define CFI_CMDSET_AMD_STANDARD 2 ++#define CFI_CMDSET_INTEL_STANDARD 3 ++#define CFI_CMDSET_AMD_EXTENDED 4 ++#define CFI_CMDSET_MITSU_STANDARD 256 ++#define CFI_CMDSET_MITSU_EXTENDED 257 ++#define CFI_CMDSET_SST 258 + + #ifdef CFG_FLASH_CFI_AMD_RESET /* needed for STM_ID_29W320DB on UC100 */ + # undef FLASH_CMD_RESET +-# define FLASH_CMD_RESET AMD_CMD_RESET /* use AMD-Reset instead */ ++# define FLASH_CMD_RESET AMD_CMD_RESET /* use AMD-Reset instead */ + #endif + +- + typedef union { + unsigned char c; + unsigned short w; +@@ -168,7 +152,7 @@ typedef union { + volatile unsigned long long *llp; + } cfiptr_t; + +-#define NUM_ERASE_REGIONS 4 ++#define NUM_ERASE_REGIONS 4 /* max. number of erase regions */ + + /* use CFG_MAX_FLASH_BANKS_DETECT if defined */ + #ifdef CFG_MAX_FLASH_BANKS_DETECT +@@ -200,6 +184,7 @@ static void flash_unlock_seq (flash_info + static int flash_isequal (flash_info_t * info, flash_sect_t sect, uint offset, uchar cmd); + static int flash_isset (flash_info_t * info, flash_sect_t sect, uint offset, uchar cmd); + static int flash_toggle (flash_info_t * info, flash_sect_t sect, uint offset, uchar cmd); ++static void flash_read_jedec_ids (flash_info_t * info); + static int flash_detect_cfi (flash_info_t * info); + static int flash_write_cfiword (flash_info_t * info, ulong dest, cfiword_t cword); + static int flash_full_status_check (flash_info_t * info, flash_sect_t sector, +@@ -307,7 +292,7 @@ ushort flash_read_ushort (flash_info_t * + } + + /*----------------------------------------------------------------------- +- * read a long word by picking the least significant byte of each maiximum ++ * read a long word by picking the least significant byte of each maximum + * port size word. Swap for ppc format. + */ + ulong flash_read_long (flash_info_t * info, flash_sect_t sect, uint offset) +@@ -529,14 +514,42 @@ void flash_print_info (flash_info_t * in + (info->portwidth << 3), (info->chipwidth << 3)); + printf (" Size: %ld MB in %d Sectors\n", + info->size >> 20, info->sector_count); +- printf (" Erase timeout %ld ms, write timeout %ld ms, buffer write timeout %ld ms, buffer size %d\n", ++ printf (" "); ++ switch (info->vendor) { ++ case CFI_CMDSET_INTEL_STANDARD: ++ printf ("Intel Standard"); ++ break; ++ case CFI_CMDSET_INTEL_EXTENDED: ++ printf ("Intel Extended"); ++ break; ++ case CFI_CMDSET_AMD_STANDARD: ++ printf ("AMD Standard"); ++ break; ++ case CFI_CMDSET_AMD_EXTENDED: ++ printf ("AMD Extended"); ++ break; ++ default: ++ printf ("Unknown (%d)", info->vendor); ++ break; ++ } ++ printf (" command set, Manufacturer ID: 0x%02X, Device ID: 0x%02X", ++ info->manufacturer_id, info->device_id); ++ if (info->device_id == 0x7E) { ++ printf("%04X", info->device_id2); ++ } ++ printf ("\n Erase timeout: %ld ms, write timeout: %ld ms\n", + info->erase_blk_tout, +- info->write_tout, ++ info->write_tout); ++ if (info->buffer_size > 1) { ++ printf (" Buffer write timeout: %ld ms, buffer size: %d bytes\n", + info->buffer_write_tout, + info->buffer_size); ++ } + +- puts (" Sector Start Addresses:"); ++ puts ("\n Sector Start Addresses:"); + for (i = 0; i < info->sector_count; ++i) { ++ if ((i % 5) == 0) ++ printf ("\n"); + #ifdef CFG_FLASH_EMPTY_INFO + int k; + int size; +@@ -560,18 +573,15 @@ void flash_print_info (flash_info_t * in + } + } + +- if ((i % 5) == 0) +- printf ("\n"); + /* print empty and read-only info */ +- printf (" %08lX%s%s", ++ printf (" %08lX %c %s ", + info->start[i], +- erased ? " E" : " ", +- info->protect[i] ? "RO " : " "); ++ erased ? 'E' : ' ', ++ info->protect[i] ? "RO" : " "); + #else /* ! CFG_FLASH_EMPTY_INFO */ +- if ((i % 5) == 0) +- printf ("\n "); +- printf (" %08lX%s", +- info->start[i], info->protect[i] ? " (RO)" : " "); ++ printf (" %08lX %s ", ++ info->start[i], ++ info->protect[i] ? "RO" : " "); + #endif + } + putc ('\n'); +@@ -1071,6 +1081,55 @@ static int flash_toggle (flash_info_t * + } + + /*----------------------------------------------------------------------- ++ * read jedec ids from device and set corresponding fields in info struct ++ * ++ * Note: assume cfi->vendor, cfi->portwidth and cfi->chipwidth are correct ++ * ++*/ ++static void flash_read_jedec_ids (flash_info_t * info) ++{ ++ info->manufacturer_id = 0; ++ info->device_id = 0; ++ info->device_id2 = 0; ++ ++ switch (info->vendor) { ++ case CFI_CMDSET_INTEL_STANDARD: ++ case CFI_CMDSET_INTEL_EXTENDED: ++ flash_write_cmd(info, 0, 0, FLASH_CMD_RESET); ++ flash_write_cmd(info, 0, 0, FLASH_CMD_READ_ID); ++ udelay(1000); /* some flash are slow to respond */ ++ info->manufacturer_id = flash_read_uchar (info, ++ FLASH_OFFSET_MANUFACTURER_ID); ++ info->device_id = flash_read_uchar (info, ++ FLASH_OFFSET_DEVICE_ID); ++ flash_write_cmd(info, 0, 0, FLASH_CMD_RESET); ++ break; ++ case CFI_CMDSET_AMD_STANDARD: ++ case CFI_CMDSET_AMD_EXTENDED: ++ flash_write_cmd(info, 0, 0, AMD_CMD_RESET); ++ flash_unlock_seq(info, 0); ++ flash_write_cmd(info, 0, AMD_ADDR_START, FLASH_CMD_READ_ID); ++ udelay(1000); /* some flash are slow to respond */ ++ info->manufacturer_id = flash_read_uchar (info, ++ FLASH_OFFSET_MANUFACTURER_ID); ++ info->device_id = flash_read_uchar (info, ++ FLASH_OFFSET_DEVICE_ID); ++ if (info->device_id == 0x7E) { ++ /* AMD 3-byte (expanded) device ids */ ++ info->device_id2 = flash_read_uchar (info, ++ FLASH_OFFSET_DEVICE_ID2); ++ info->device_id2 <<= 8; ++ info->device_id2 |= flash_read_uchar (info, ++ FLASH_OFFSET_DEVICE_ID3); ++ } ++ flash_write_cmd(info, 0, 0, AMD_CMD_RESET); ++ break; ++ default: ++ break; ++ } ++} ++ ++/*----------------------------------------------------------------------- + * detect if flash is compatible with the Common Flash Interface (CFI) + * http://www.jedec.org/download/search/jesd68.pdf + * +@@ -1120,15 +1179,31 @@ ulong flash_get_size (ulong base, int ba + uchar num_erase_regions; + int erase_region_size; + int erase_region_count; ++ int geometry_reversed = 0; ++ ++ info->ext_addr = 0; ++ info->cfi_version = 0; + #ifdef CFG_FLASH_PROTECTION +- int ext_addr; + info->legacy_unlock = 0; + #endif + + info->start[0] = base; + + if (flash_detect_cfi (info)) { +- info->vendor = flash_read_ushort (info, 0, FLASH_OFFSET_PRIMARY_VENDOR); ++ info->vendor = flash_read_ushort (info, 0, ++ FLASH_OFFSET_PRIMARY_VENDOR); ++ flash_read_jedec_ids (info); ++ flash_write_cmd (info, 0, FLASH_OFFSET_CFI, FLASH_CMD_CFI); ++ num_erase_regions = flash_read_uchar (info, ++ FLASH_OFFSET_NUM_ERASE_REGIONS); ++ info->ext_addr = flash_read_ushort (info, 0, ++ FLASH_OFFSET_EXT_QUERY_T_P_ADDR); ++ if (info->ext_addr) { ++ info->cfi_version = (ushort) flash_read_uchar (info, ++ info->ext_addr + 3) << 8; ++ info->cfi_version |= (ushort) flash_read_uchar (info, ++ info->ext_addr + 4); ++ } + #ifdef DEBUG + flash_printqry (info, 0); + #endif +@@ -1139,26 +1214,46 @@ ulong flash_get_size (ulong base, int ba + info->cmd_reset = FLASH_CMD_RESET; + #ifdef CFG_FLASH_PROTECTION + /* read legacy lock/unlock bit from intel flash */ +- ext_addr = flash_read_ushort (info, 0, +- FLASH_OFFSET_EXT_QUERY_T_P_ADDR); +- info->legacy_unlock = +- flash_read_uchar (info, ext_addr + 5) & 0x08; ++ if (info->ext_addr) { ++ info->legacy_unlock = flash_read_uchar (info, ++ info->ext_addr + 5) & 0x08; ++ } + #endif + break; + case CFI_CMDSET_AMD_STANDARD: + case CFI_CMDSET_AMD_EXTENDED: + info->cmd_reset = AMD_CMD_RESET; ++ /* check if flash geometry needs reversal */ ++ if (num_erase_regions <= 1) ++ break; ++ /* reverse geometry if top boot part */ ++ if (info->cfi_version < 0x3131) { ++ /* CFI < 1.1, try to guess from device id */ ++ if ((info->device_id & 0x80) != 0) { ++ geometry_reversed = 1; ++ } ++ break; ++ } ++ /* CFI >= 1.1, deduct from top/bottom flag */ ++ /* note: ext_addr is valid since cfi_version > 0 */ ++ if (flash_read_uchar(info, info->ext_addr + 0xf) == 3) { ++ geometry_reversed = 1; ++ } + break; + } + + debug ("manufacturer is %d\n", info->vendor); ++ debug ("manufacturer id is 0x%x\n", info->manufacturer_id); ++ debug ("device id is 0x%x\n", info->device_id); ++ debug ("device id2 is 0x%x\n", info->device_id2); ++ debug ("cfi version is 0x%04x\n", info->cfi_version); ++ + size_ratio = info->portwidth / info->chipwidth; + /* if the chip is x8/x16 reduce the ratio by half */ + if ((info->interface == FLASH_CFI_X8X16) + && (info->chipwidth == FLASH_CFI_BY8)) { + size_ratio >>= 1; + } +- num_erase_regions = flash_read_uchar (info, FLASH_OFFSET_NUM_ERASE_REGIONS); + debug ("size_ratio %d port %d bits chip %d bits\n", + size_ratio, info->portwidth << CFI_FLASH_SHIFT_WIDTH, + info->chipwidth << CFI_FLASH_SHIFT_WIDTH); +@@ -1171,7 +1266,12 @@ ulong flash_get_size (ulong base, int ba + num_erase_regions, NUM_ERASE_REGIONS); + break; + } +- tmp = flash_read_long (info, 0, ++ if (geometry_reversed) ++ tmp = flash_read_long (info, 0, ++ FLASH_OFFSET_ERASE_REGIONS + ++ (num_erase_regions - 1 - i) * 4); ++ else ++ tmp = flash_read_long (info, 0, + FLASH_OFFSET_ERASE_REGIONS + + i * 4); + erase_region_size = +diff -Naupr u-boot-1.1.6/drivers/fsl_i2c.c u-boot-1.1.6-fsl-1/drivers/fsl_i2c.c +--- u-boot-1.1.6/drivers/fsl_i2c.c 2006-11-02 08:15:01.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/drivers/fsl_i2c.c 2006-11-30 12:34:13.000000000 -0600 +@@ -28,29 +28,52 @@ + #include <asm/fsl_i2c.h> /* HW definitions */ + + #define I2C_TIMEOUT (CFG_HZ / 4) +-#define I2C ((struct fsl_i2c *)(CFG_IMMR + CFG_I2C_OFFSET)) + ++#define I2C_READ_BIT 1 ++#define I2C_WRITE_BIT 0 ++ ++/* Initialize the bus pointer to whatever one the SPD EEPROM is on. ++ * Default is bus 0. This is necessary because the DDR initialization ++ * runs from ROM, and we can't switch buses because we can't modify ++ * the global variables. ++ */ ++#ifdef CFG_SPD_BUS_NUM ++static unsigned int i2c_bus_num __attribute__ ((section ("data"))) = CFG_SPD_BUS_NUM; ++#else ++static unsigned int i2c_bus_num __attribute__ ((section ("data"))) = 0; ++#endif ++ ++static volatile struct fsl_i2c *i2c_dev[2] = { ++ (struct fsl_i2c *) (CFG_IMMR + CFG_I2C_OFFSET), ++#ifdef CFG_I2C2_OFFSET ++ (struct fsl_i2c *) (CFG_IMMR + CFG_I2C2_OFFSET) ++#endif ++}; + + void + i2c_init(int speed, int slaveadd) + { +- /* stop I2C controller */ +- writeb(0x0, &I2C->cr); +- +- /* set clock */ +- writeb(0x3f, &I2C->fdr); +- +- /* set default filter */ +- writeb(0x10, &I2C->dfsrr); ++ volatile struct fsl_i2c *dev; + +- /* write slave address */ +- writeb(slaveadd, &I2C->adr); ++ dev = (struct fsl_i2c *) (CFG_IMMR + CFG_I2C_OFFSET); + +- /* clear status register */ +- writeb(0x0, &I2C->sr); +- +- /* start I2C controller */ +- writeb(I2C_CR_MEN, &I2C->cr); ++ writeb(0, &dev->cr); /* stop I2C controller */ ++ writeb(0x3F, &dev->fdr); /* set bus speed */ ++ writeb(0x3F, &dev->dfsrr); /* set default filter */ ++ writeb(slaveadd << 1, &dev->adr); /* write slave address */ ++ writeb(0x0, &dev->sr); /* clear status register */ ++ writeb(I2C_CR_MEN, &dev->cr); /* start I2C controller */ ++ ++#ifdef CFG_I2C2_OFFSET ++ dev = (struct fsl_i2c *) (CFG_IMMR + CFG_I2C2_OFFSET); ++ ++ writeb(0, &dev->cr); /* stop I2C controller */ ++ writeb(0x3F, &dev->fdr); /* set bus speed */ ++ writeb(0x3F, &dev->dfsrr); /* set default filter */ ++ writeb(slaveadd, &dev->adr); /* write slave address */ ++ writeb(0x0, &dev->sr); /* clear status register */ ++ writeb(I2C_CR_MEN, &dev->cr); /* start I2C controller */ ++#endif /* CFG_I2C2_OFFSET */ + } + + static __inline__ int +@@ -58,7 +81,7 @@ i2c_wait4bus(void) + { + ulong timeval = get_timer(0); + +- while (readb(&I2C->sr) & I2C_SR_MBB) { ++ while (readb(&i2c_dev[i2c_bus_num]->sr) & I2C_SR_MBB) { + if (get_timer(timeval) > I2C_TIMEOUT) { + return -1; + } +@@ -74,11 +97,11 @@ i2c_wait(int write) + ulong timeval = get_timer(0); + + do { +- csr = readb(&I2C->sr); ++ csr = readb(&i2c_dev[i2c_bus_num]->sr); + if (!(csr & I2C_SR_MIF)) + continue; + +- writeb(0x0, &I2C->sr); ++ writeb(0x0, &i2c_dev[i2c_bus_num]->sr); + + if (csr & I2C_SR_MAL) { + debug("i2c_wait: MAL\n"); +@@ -90,7 +113,7 @@ i2c_wait(int write) + return -1; + } + +- if (write == I2C_WRITE && (csr & I2C_SR_RXAK)) { ++ if (write == I2C_WRITE_BIT && (csr & I2C_SR_RXAK)) { + debug("i2c_wait: No RXACK\n"); + return -1; + } +@@ -107,11 +130,11 @@ i2c_write_addr (u8 dev, u8 dir, int rsta + { + writeb(I2C_CR_MEN | I2C_CR_MSTA | I2C_CR_MTX + | (rsta ? I2C_CR_RSTA : 0), +- &I2C->cr); ++ &i2c_dev[i2c_bus_num]->cr); + +- writeb((dev << 1) | dir, &I2C->dr); ++ writeb((dev << 1) | dir, &i2c_dev[i2c_bus_num]->dr); + +- if (i2c_wait(I2C_WRITE) < 0) ++ if (i2c_wait(I2C_WRITE_BIT) < 0) + return 0; + + return 1; +@@ -123,12 +146,12 @@ __i2c_write(u8 *data, int length) + int i; + + writeb(I2C_CR_MEN | I2C_CR_MSTA | I2C_CR_MTX, +- &I2C->cr); ++ &i2c_dev[i2c_bus_num]->cr); + + for (i = 0; i < length; i++) { +- writeb(data[i], &I2C->dr); ++ writeb(data[i], &i2c_dev[i2c_bus_num]->dr); + +- if (i2c_wait(I2C_WRITE) < 0) ++ if (i2c_wait(I2C_WRITE_BIT) < 0) + break; + } + +@@ -141,25 +164,25 @@ __i2c_read(u8 *data, int length) + int i; + + writeb(I2C_CR_MEN | I2C_CR_MSTA | ((length == 1) ? I2C_CR_TXAK : 0), +- &I2C->cr); ++ &i2c_dev[i2c_bus_num]->cr); + + /* dummy read */ +- readb(&I2C->dr); ++ readb(&i2c_dev[i2c_bus_num]->dr); + + for (i = 0; i < length; i++) { +- if (i2c_wait(I2C_READ) < 0) ++ if (i2c_wait(I2C_READ_BIT) < 0) + break; + + /* Generate ack on last next to last byte */ + if (i == length - 2) + writeb(I2C_CR_MEN | I2C_CR_MSTA | I2C_CR_TXAK, +- &I2C->cr); ++ &i2c_dev[i2c_bus_num]->cr); + + /* Generate stop on last byte */ + if (i == length - 1) +- writeb(I2C_CR_MEN | I2C_CR_TXAK, &I2C->cr); ++ writeb(I2C_CR_MEN | I2C_CR_TXAK, &i2c_dev[i2c_bus_num]->cr); + +- data[i] = readb(&I2C->dr); ++ data[i] = readb(&i2c_dev[i2c_bus_num]->dr); + } + + return i; +@@ -172,13 +195,13 @@ i2c_read(u8 dev, uint addr, int alen, u8 + u8 *a = (u8*)&addr; + + if (i2c_wait4bus() >= 0 +- && i2c_write_addr(dev, I2C_WRITE, 0) != 0 ++ && i2c_write_addr(dev, I2C_WRITE_BIT, 0) != 0 + && __i2c_write(&a[4 - alen], alen) == alen +- && i2c_write_addr(dev, I2C_READ, 1) != 0) { ++ && i2c_write_addr(dev, I2C_READ_BIT, 1) != 0) { + i = __i2c_read(data, length); + } + +- writeb(I2C_CR_MEN, &I2C->cr); ++ writeb(I2C_CR_MEN, &i2c_dev[i2c_bus_num]->cr); + + if (i == length) + return 0; +@@ -193,12 +216,12 @@ i2c_write(u8 dev, uint addr, int alen, u + u8 *a = (u8*)&addr; + + if (i2c_wait4bus() >= 0 +- && i2c_write_addr(dev, I2C_WRITE, 0) != 0 ++ && i2c_write_addr(dev, I2C_WRITE_BIT, 0) != 0 + && __i2c_write(&a[4 - alen], alen) == alen) { + i = __i2c_write(data, length); + } + +- writeb(I2C_CR_MEN, &I2C->cr); ++ writeb(I2C_CR_MEN, &i2c_dev[i2c_bus_num]->cr); + + if (i == length) + return 0; +@@ -237,5 +260,34 @@ i2c_reg_write(uchar i2c_addr, uchar reg, + i2c_write(i2c_addr, reg, 1, &val, 1); + } + ++int i2c_set_bus_num(unsigned int bus) ++{ ++#ifdef CFG_I2C2_OFFSET ++ if (bus > 1) { ++#else ++ if (bus > 0) { ++#endif ++ return -1; ++ } ++ ++ i2c_bus_num = bus; ++ ++ return 0; ++} ++ ++int i2c_set_bus_speed(unsigned int speed) ++{ ++ return -1; ++} ++ ++unsigned int i2c_get_bus_num(void) ++{ ++ return i2c_bus_num; ++} ++ ++unsigned int i2c_get_bus_speed(void) ++{ ++ return 0; ++} + #endif /* CONFIG_HARD_I2C */ + #endif /* CONFIG_FSL_I2C */ +diff -Naupr u-boot-1.1.6/drivers/nand/nand_base.c u-boot-1.1.6-fsl-1/drivers/nand/nand_base.c +--- u-boot-1.1.6/drivers/nand/nand_base.c 2006-11-02 08:15:01.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/drivers/nand/nand_base.c 2006-12-06 10:33:49.000000000 -0600 +@@ -838,9 +838,9 @@ static int nand_wait(struct mtd_info *mt + unsigned long timeo; + + if (state == FL_ERASING) +- timeo = CFG_HZ * 400; ++ timeo = (CFG_HZ * 400) / 1000; + else +- timeo = CFG_HZ * 20; ++ timeo = (CFG_HZ * 20) / 1000; + + if ((state == FL_ERASING) && (this->options & NAND_IS_AND)) + this->cmdfunc(mtd, NAND_CMD_STATUS_MULTI, -1, -1); +@@ -852,8 +852,8 @@ static int nand_wait(struct mtd_info *mt + while (1) { + if (get_timer(0) > timeo) { + printf("Timeout!"); +- return 0; +- } ++ return 0x01; ++ } + + if (this->dev_ready) { + if (this->dev_ready(mtd)) +@@ -1713,6 +1713,7 @@ static int nand_write_ecc (struct mtd_in + goto out; + } + *retlen = written; ++ bufstart = (u_char*) &buf[written]; + + ofs = autoplace ? mtd->oobavail : mtd->oobsize; + if (eccbuf) +@@ -2407,7 +2408,9 @@ int nand_scan (struct mtd_info *mtd, int + } + + if (!nand_flash_ids[i].name) { ++#ifndef CFG_NAND_QUIET_TEST + printk (KERN_WARNING "No NAND device found!!!\n"); ++#endif + this->select_chip(mtd, -1); + return 1; + } +diff -Naupr u-boot-1.1.6/drivers/qe/Makefile u-boot-1.1.6-fsl-1/drivers/qe/Makefile +--- u-boot-1.1.6/drivers/qe/Makefile 1969-12-31 18:00:00.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/drivers/qe/Makefile 2006-11-10 11:24:29.000000000 -0600 +@@ -0,0 +1,43 @@ ++# ++# Copyright (C) 2006 Freescale Semiconductor, Inc. ++# ++# See file CREDITS for list of people who contributed to this ++# project. ++# ++# This program is free software; you can redistribute it and/or ++# modify it under the terms of the GNU General Public License as ++# published by the Free Software Foundation; either version 2 of ++# the License, or (at your option) any later version. ++# ++# This program is distributed in the hope that it will be useful, ++# but WITHOUT ANY WARRANTY; without even the implied warranty of ++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++# GNU General Public License for more details. ++# ++# You should have received a copy of the GNU General Public License ++# along with this program; if not, write to the Free Software ++# Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++# MA 02111-1307 USA ++# ++ ++include $(TOPDIR)/config.mk ++ ++LIB := $(obj)qe.a ++ ++COBJS := qe.o uccf.o uec.o uec_phy.o ++ ++SRCS := $(COBJS:.o=.c) ++OBJS := $(addprefix $(obj),$(COBJS)) ++ ++all: $(LIB) ++ ++$(LIB): $(obj).depend $(OBJS) ++ $(AR) $(ARFLAGS) $@ $(OBJS) ++ ++######################################################################### ++ ++include $(SRCTREE)/rules.mk ++ ++sinclude $(obj).depend ++ ++######################################################################### +diff -Naupr u-boot-1.1.6/drivers/qe/qe.c u-boot-1.1.6-fsl-1/drivers/qe/qe.c +--- u-boot-1.1.6/drivers/qe/qe.c 1969-12-31 18:00:00.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/drivers/qe/qe.c 2006-11-10 11:24:29.000000000 -0600 +@@ -0,0 +1,254 @@ ++/* ++ * Copyright (C) 2006 Freescale Semiconductor, Inc. ++ * ++ * Dave Liu <daveliu@freescale.com> ++ * based on source code of Shlomi Gridish ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#include "common.h" ++#include "asm/errno.h" ++#include "asm/io.h" ++#include "asm/immap_qe.h" ++#include "qe.h" ++ ++#if defined(CONFIG_QE) ++qe_map_t *qe_immr = NULL; ++static qe_snum_t snums[QE_NUM_OF_SNUM]; ++ ++void qe_issue_cmd(uint cmd, uint sbc, u8 mcn, u32 cmd_data) ++{ ++ u32 cecr; ++ ++ if (cmd == QE_RESET) { ++ out_be32(&qe_immr->cp.cecr,(u32) (cmd | QE_CR_FLG)); ++ } else { ++ out_be32(&qe_immr->cp.cecdr, cmd_data); ++ out_be32(&qe_immr->cp.cecr, (sbc | QE_CR_FLG | ++ ((u32) mcn<<QE_CR_PROTOCOL_SHIFT) | cmd)); ++ } ++ /* Wait for the QE_CR_FLG to clear */ ++ do { ++ cecr = in_be32(&qe_immr->cp.cecr); ++ } while (cecr & QE_CR_FLG); ++ ++ return; ++} ++ ++uint qe_muram_alloc(uint size, uint align) ++{ ++ DECLARE_GLOBAL_DATA_PTR; ++ ++ uint retloc; ++ uint align_mask, off; ++ uint savebase; ++ ++ align_mask = align - 1; ++ savebase = gd->mp_alloc_base; ++ ++ if ((off = (gd->mp_alloc_base & align_mask)) != 0) ++ gd->mp_alloc_base += (align - off); ++ ++ if ((off = size & align_mask) != 0) ++ size += (align - off); ++ ++ if ((gd->mp_alloc_base + size) >= gd->mp_alloc_top) { ++ gd->mp_alloc_base = savebase; ++ printf("%s: ran out of ram.\n", __FUNCTION__); ++ } ++ ++ retloc = gd->mp_alloc_base; ++ gd->mp_alloc_base += size; ++ ++ memset((void *)&qe_immr->muram[retloc], 0, size); ++ ++ __asm__ __volatile__("sync"); ++ ++ return retloc; ++} ++ ++void *qe_muram_addr(uint offset) ++{ ++ return (void *)&qe_immr->muram[offset]; ++} ++ ++static void qe_sdma_init(void) ++{ ++ volatile sdma_t *p; ++ uint sdma_buffer_base; ++ ++ p = (volatile sdma_t *)&qe_immr->sdma; ++ ++ /* All of DMA transaction in bus 1 */ ++ out_be32(&p->sdaqr, 0); ++ out_be32(&p->sdaqmr, 0); ++ ++ /* Allocate 2KB temporary buffer for sdma */ ++ sdma_buffer_base = qe_muram_alloc(2048, 64); ++ out_be32(&p->sdwbcr, sdma_buffer_base & QE_SDEBCR_BA_MASK); ++ ++ /* Clear sdma status */ ++ out_be32(&p->sdsr, 0x03000000); ++ ++ /* Enable global mode on bus 1, and 2KB buffer size */ ++ out_be32(&p->sdmr, QE_SDMR_GLB_1_MSK | (0x3 << QE_SDMR_CEN_SHIFT)); ++} ++ ++static u8 thread_snum[QE_NUM_OF_SNUM] = { ++ 0x04, 0x05, 0x0c, 0x0d, ++ 0x14, 0x15, 0x1c, 0x1d, ++ 0x24, 0x25, 0x2c, 0x2d, ++ 0x34, 0x35, 0x88, 0x89, ++ 0x98, 0x99, 0xa8, 0xa9, ++ 0xb8, 0xb9, 0xc8, 0xc9, ++ 0xd8, 0xd9, 0xe8, 0xe9 ++}; ++ ++static void qe_snums_init(void) ++{ ++ int i; ++ ++ for (i = 0; i < QE_NUM_OF_SNUM; i++) { ++ snums[i].state = QE_SNUM_STATE_FREE; ++ snums[i].num = thread_snum[i]; ++ } ++} ++ ++int qe_get_snum(void) ++{ ++ int snum = -EBUSY; ++ int i; ++ ++ for (i = 0; i < QE_NUM_OF_SNUM; i++) { ++ if (snums[i].state == QE_SNUM_STATE_FREE) { ++ snums[i].state = QE_SNUM_STATE_USED; ++ snum = snums[i].num; ++ break; ++ } ++ } ++ ++ return snum; ++} ++ ++void qe_put_snum(u8 snum) ++{ ++ int i; ++ ++ for (i = 0; i < QE_NUM_OF_SNUM; i++) { ++ if (snums[i].num == snum) { ++ snums[i].state = QE_SNUM_STATE_FREE; ++ break; ++ } ++ } ++} ++ ++void qe_init(uint qe_base) ++{ ++ DECLARE_GLOBAL_DATA_PTR; ++ ++ /* Init the QE IMMR base */ ++ qe_immr = (qe_map_t *)qe_base; ++ ++ gd->mp_alloc_base = QE_DATAONLY_BASE; ++ gd->mp_alloc_top = gd->mp_alloc_base + QE_DATAONLY_SIZE; ++ ++ qe_sdma_init(); ++ qe_snums_init(); ++} ++ ++void qe_reset(void) ++{ ++ qe_issue_cmd(QE_RESET, QE_CR_SUBBLOCK_INVALID, ++ (u8) QE_CR_PROTOCOL_UNSPECIFIED, 0); ++} ++ ++void qe_assign_page(uint snum, uint para_ram_base) ++{ ++ u32 cecr; ++ ++ out_be32(&qe_immr->cp.cecdr, para_ram_base); ++ out_be32(&qe_immr->cp.cecr, ((u32) snum<<QE_CR_ASSIGN_PAGE_SNUM_SHIFT) ++ | QE_CR_FLG | QE_ASSIGN_PAGE); ++ ++ /* Wait for the QE_CR_FLG to clear */ ++ do { ++ cecr = in_be32(&qe_immr->cp.cecr); ++ } while (cecr & QE_CR_FLG ); ++ ++ return; ++} ++ ++/* ++ * brg: 0~15 as BRG1~BRG16 ++ rate: baud rate ++ * BRG input clock comes from the BRGCLK (internal clock generated from ++ the QE clock, it is one-half of the QE clock), If need the clock source ++ from CLKn pin, we have te change the function. ++ */ ++ ++#define BRG_CLK (gd->brg_clk) ++ ++int qe_set_brg(uint brg, uint rate) ++{ ++ DECLARE_GLOBAL_DATA_PTR; ++ volatile uint *bp; ++ u32 divisor; ++ int div16 = 0; ++ ++ if (brg >= QE_NUM_OF_BRGS) ++ return -EINVAL; ++ bp = (uint *)&qe_immr->brg.brgc1; ++ bp += brg; ++ ++ divisor = (BRG_CLK / rate); ++ if (divisor > QE_BRGC_DIVISOR_MAX + 1) { ++ div16 = 1; ++ divisor /= 16; ++ } ++ ++ *bp = ((divisor - 1) << QE_BRGC_DIVISOR_SHIFT) | QE_BRGC_ENABLE; ++ __asm__ __volatile__("sync"); ++ ++ if (div16) { ++ *bp |= QE_BRGC_DIV16; ++ __asm__ __volatile__("sync"); ++ } ++ ++ return 0; ++} ++ ++/* Set ethernet MII clock master ++*/ ++int qe_set_mii_clk_src(int ucc_num) ++{ ++ u32 cmxgcr; ++ ++ /* check if the UCC number is in range. */ ++ if ((ucc_num > UCC_MAX_NUM - 1) || (ucc_num < 0)) { ++ printf("%s: ucc num not in ranges\n", __FUNCTION__); ++ return -EINVAL; ++ } ++ ++ cmxgcr = in_be32(&qe_immr->qmx.cmxgcr); ++ cmxgcr &= ~QE_CMXGCR_MII_ENET_MNG_MASK; ++ cmxgcr |= (ucc_num <<QE_CMXGCR_MII_ENET_MNG_SHIFT); ++ out_be32(&qe_immr->qmx.cmxgcr, cmxgcr); ++ ++ return 0; ++} ++ ++#endif /* CONFIG_QE */ +diff -Naupr u-boot-1.1.6/drivers/qe/qe.h u-boot-1.1.6-fsl-1/drivers/qe/qe.h +--- u-boot-1.1.6/drivers/qe/qe.h 1969-12-31 18:00:00.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/drivers/qe/qe.h 2006-11-10 11:24:29.000000000 -0600 +@@ -0,0 +1,237 @@ ++/* ++ * Copyright (C) 2006 Freescale Semiconductor, Inc. ++ * ++ * Dave Liu <daveliu@freescale.com> ++ * based on source code of Shlomi Gridish ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#ifndef __QE_H__ ++#define __QE_H__ ++ ++#include "common.h" ++ ++#define QE_NUM_OF_SNUM 28 ++#define QE_NUM_OF_BRGS 16 ++#define UCC_MAX_NUM 8 ++ ++#define QE_DATAONLY_BASE (uint)(128) ++#define QE_DATAONLY_SIZE ((uint)(0xc000) - QE_DATAONLY_BASE) ++ ++/* QE threads SNUM ++*/ ++typedef enum qe_snum_state { ++ QE_SNUM_STATE_USED, /* used */ ++ QE_SNUM_STATE_FREE /* free */ ++} qe_snum_state_e; ++ ++typedef struct qe_snum { ++ u8 num; /* snum */ ++ qe_snum_state_e state; /* state */ ++} qe_snum_t; ++ ++/* QE RISC allocation ++*/ ++typedef enum qe_risc_allocation { ++ QE_RISC_ALLOCATION_RISC1 = 1, /* RISC 1 */ ++ QE_RISC_ALLOCATION_RISC2 = 2, /* RISC 2 */ ++ QE_RISC_ALLOCATION_RISC1_AND_RISC2 = 3 /* RISC 1 or RISC 2 */ ++} qe_risc_allocation_e; ++ ++/* QE CECR commands for UCC fast. ++*/ ++#define QE_CR_FLG 0x00010000 ++#define QE_RESET 0x80000000 ++#define QE_INIT_TX_RX 0x00000000 ++#define QE_INIT_RX 0x00000001 ++#define QE_INIT_TX 0x00000002 ++#define QE_ENTER_HUNT_MODE 0x00000003 ++#define QE_STOP_TX 0x00000004 ++#define QE_GRACEFUL_STOP_TX 0x00000005 ++#define QE_RESTART_TX 0x00000006 ++#define QE_SWITCH_COMMAND 0x00000007 ++#define QE_SET_GROUP_ADDRESS 0x00000008 ++#define QE_INSERT_CELL 0x00000009 ++#define QE_ATM_TRANSMIT 0x0000000a ++#define QE_CELL_POOL_GET 0x0000000b ++#define QE_CELL_POOL_PUT 0x0000000c ++#define QE_IMA_HOST_CMD 0x0000000d ++#define QE_ATM_MULTI_THREAD_INIT 0x00000011 ++#define QE_ASSIGN_PAGE 0x00000012 ++#define QE_START_FLOW_CONTROL 0x00000014 ++#define QE_STOP_FLOW_CONTROL 0x00000015 ++#define QE_ASSIGN_PAGE_TO_DEVICE 0x00000016 ++#define QE_GRACEFUL_STOP_RX 0x0000001a ++#define QE_RESTART_RX 0x0000001b ++ ++/* QE CECR Sub Block Code - sub block code of QE command. ++*/ ++#define QE_CR_SUBBLOCK_INVALID 0x00000000 ++#define QE_CR_SUBBLOCK_USB 0x03200000 ++#define QE_CR_SUBBLOCK_UCCFAST1 0x02000000 ++#define QE_CR_SUBBLOCK_UCCFAST2 0x02200000 ++#define QE_CR_SUBBLOCK_UCCFAST3 0x02400000 ++#define QE_CR_SUBBLOCK_UCCFAST4 0x02600000 ++#define QE_CR_SUBBLOCK_UCCFAST5 0x02800000 ++#define QE_CR_SUBBLOCK_UCCFAST6 0x02a00000 ++#define QE_CR_SUBBLOCK_UCCFAST7 0x02c00000 ++#define QE_CR_SUBBLOCK_UCCFAST8 0x02e00000 ++#define QE_CR_SUBBLOCK_UCCSLOW1 0x00000000 ++#define QE_CR_SUBBLOCK_UCCSLOW2 0x00200000 ++#define QE_CR_SUBBLOCK_UCCSLOW3 0x00400000 ++#define QE_CR_SUBBLOCK_UCCSLOW4 0x00600000 ++#define QE_CR_SUBBLOCK_UCCSLOW5 0x00800000 ++#define QE_CR_SUBBLOCK_UCCSLOW6 0x00a00000 ++#define QE_CR_SUBBLOCK_UCCSLOW7 0x00c00000 ++#define QE_CR_SUBBLOCK_UCCSLOW8 0x00e00000 ++#define QE_CR_SUBBLOCK_MCC1 0x03800000 ++#define QE_CR_SUBBLOCK_MCC2 0x03a00000 ++#define QE_CR_SUBBLOCK_MCC3 0x03000000 ++#define QE_CR_SUBBLOCK_IDMA1 0x02800000 ++#define QE_CR_SUBBLOCK_IDMA2 0x02a00000 ++#define QE_CR_SUBBLOCK_IDMA3 0x02c00000 ++#define QE_CR_SUBBLOCK_IDMA4 0x02e00000 ++#define QE_CR_SUBBLOCK_HPAC 0x01e00000 ++#define QE_CR_SUBBLOCK_SPI1 0x01400000 ++#define QE_CR_SUBBLOCK_SPI2 0x01600000 ++#define QE_CR_SUBBLOCK_RAND 0x01c00000 ++#define QE_CR_SUBBLOCK_TIMER 0x01e00000 ++#define QE_CR_SUBBLOCK_GENERAL 0x03c00000 ++ ++/* QE CECR Protocol - For non-MCC, specifies mode for QE CECR command. ++*/ ++#define QE_CR_PROTOCOL_UNSPECIFIED 0x00 /* For all other protocols */ ++#define QE_CR_PROTOCOL_HDLC_TRANSPARENT 0x00 ++#define QE_CR_PROTOCOL_ATM_POS 0x0A ++#define QE_CR_PROTOCOL_ETHERNET 0x0C ++#define QE_CR_PROTOCOL_L2_SWITCH 0x0D ++#define QE_CR_PROTOCOL_SHIFT 6 ++ ++/* QE ASSIGN PAGE command ++*/ ++#define QE_CR_ASSIGN_PAGE_SNUM_SHIFT 17 ++ ++/* Communication Direction. ++*/ ++typedef enum comm_dir { ++ COMM_DIR_NONE = 0, ++ COMM_DIR_RX = 1, ++ COMM_DIR_TX = 2, ++ COMM_DIR_RX_AND_TX = 3 ++} comm_dir_e; ++ ++/* Clocks and BRG's ++*/ ++typedef enum qe_clock { ++ QE_CLK_NONE = 0, ++ QE_BRG1, /* Baud Rate Generator 1 */ ++ QE_BRG2, /* Baud Rate Generator 2 */ ++ QE_BRG3, /* Baud Rate Generator 3 */ ++ QE_BRG4, /* Baud Rate Generator 4 */ ++ QE_BRG5, /* Baud Rate Generator 5 */ ++ QE_BRG6, /* Baud Rate Generator 6 */ ++ QE_BRG7, /* Baud Rate Generator 7 */ ++ QE_BRG8, /* Baud Rate Generator 8 */ ++ QE_BRG9, /* Baud Rate Generator 9 */ ++ QE_BRG10, /* Baud Rate Generator 10 */ ++ QE_BRG11, /* Baud Rate Generator 11 */ ++ QE_BRG12, /* Baud Rate Generator 12 */ ++ QE_BRG13, /* Baud Rate Generator 13 */ ++ QE_BRG14, /* Baud Rate Generator 14 */ ++ QE_BRG15, /* Baud Rate Generator 15 */ ++ QE_BRG16, /* Baud Rate Generator 16 */ ++ QE_CLK1, /* Clock 1 */ ++ QE_CLK2, /* Clock 2 */ ++ QE_CLK3, /* Clock 3 */ ++ QE_CLK4, /* Clock 4 */ ++ QE_CLK5, /* Clock 5 */ ++ QE_CLK6, /* Clock 6 */ ++ QE_CLK7, /* Clock 7 */ ++ QE_CLK8, /* Clock 8 */ ++ QE_CLK9, /* Clock 9 */ ++ QE_CLK10, /* Clock 10 */ ++ QE_CLK11, /* Clock 11 */ ++ QE_CLK12, /* Clock 12 */ ++ QE_CLK13, /* Clock 13 */ ++ QE_CLK14, /* Clock 14 */ ++ QE_CLK15, /* Clock 15 */ ++ QE_CLK16, /* Clock 16 */ ++ QE_CLK17, /* Clock 17 */ ++ QE_CLK18, /* Clock 18 */ ++ QE_CLK19, /* Clock 19 */ ++ QE_CLK20, /* Clock 20 */ ++ QE_CLK21, /* Clock 21 */ ++ QE_CLK22, /* Clock 22 */ ++ QE_CLK23, /* Clock 23 */ ++ QE_CLK24, /* Clock 24 */ ++ QE_CLK_DUMMY ++} qe_clock_e; ++ ++/* QE CMXGCR register ++*/ ++#define QE_CMXGCR_MII_ENET_MNG_MASK 0x00007000 ++#define QE_CMXGCR_MII_ENET_MNG_SHIFT 12 ++ ++/* QE CMXUCR registers ++ */ ++#define QE_CMXUCR_TX_CLK_SRC_MASK 0x0000000F ++ ++/* QE BRG configuration register ++*/ ++#define QE_BRGC_ENABLE 0x00010000 ++#define QE_BRGC_DIVISOR_SHIFT 1 ++#define QE_BRGC_DIVISOR_MAX 0xFFF ++#define QE_BRGC_DIV16 1 ++ ++/* QE SDMA registers ++*/ ++#define QE_SDSR_BER1 0x02000000 ++#define QE_SDSR_BER2 0x01000000 ++ ++#define QE_SDMR_GLB_1_MSK 0x80000000 ++#define QE_SDMR_ADR_SEL 0x20000000 ++#define QE_SDMR_BER1_MSK 0x02000000 ++#define QE_SDMR_BER2_MSK 0x01000000 ++#define QE_SDMR_EB1_MSK 0x00800000 ++#define QE_SDMR_ER1_MSK 0x00080000 ++#define QE_SDMR_ER2_MSK 0x00040000 ++#define QE_SDMR_CEN_MASK 0x0000E000 ++#define QE_SDMR_SBER_1 0x00000200 ++#define QE_SDMR_SBER_2 0x00000200 ++#define QE_SDMR_EB1_PR_MASK 0x000000C0 ++#define QE_SDMR_ER1_PR 0x00000008 ++ ++#define QE_SDMR_CEN_SHIFT 13 ++#define QE_SDMR_EB1_PR_SHIFT 6 ++ ++#define QE_SDTM_MSNUM_SHIFT 24 ++ ++#define QE_SDEBCR_BA_MASK 0x01FFFFFF ++ ++void qe_config_iopin(u8 port, u8 pin, int dir, int open_drain, int assign); ++void qe_issue_cmd(uint cmd, uint sbc, u8 mcn, u32 cmd_data); ++uint qe_muram_alloc(uint size, uint align); ++void *qe_muram_addr(uint offset); ++int qe_get_snum(void); ++void qe_put_snum(u8 snum); ++void qe_init(uint qe_base); ++void qe_reset(void); ++void qe_assign_page(uint snum, uint para_ram_base); ++int qe_set_brg(uint brg, uint rate); ++int qe_set_mii_clk_src(int ucc_num); ++ ++#endif /* __QE_H__ */ +diff -Naupr u-boot-1.1.6/drivers/qe/uccf.c u-boot-1.1.6-fsl-1/drivers/qe/uccf.c +--- u-boot-1.1.6/drivers/qe/uccf.c 1969-12-31 18:00:00.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/drivers/qe/uccf.c 2006-12-06 10:33:49.000000000 -0600 +@@ -0,0 +1,404 @@ ++/* ++ * Copyright (C) 2006 Freescale Semiconductor, Inc. ++ * ++ * Dave Liu <daveliu@freescale.com> ++ * based on source code of Shlomi Gridish ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#include "common.h" ++#include "malloc.h" ++#include "asm/errno.h" ++#include "asm/io.h" ++#include "asm/immap_qe.h" ++#include "qe.h" ++#include "uccf.h" ++ ++#if defined(CONFIG_QE) ++void ucc_fast_transmit_on_demand(ucc_fast_private_t *uccf) ++{ ++ out_be16(&uccf->uf_regs->utodr, UCC_FAST_TOD); ++} ++ ++u32 ucc_fast_get_qe_cr_subblock(int ucc_num) ++{ ++ switch (ucc_num) { ++ case 0: return QE_CR_SUBBLOCK_UCCFAST1; ++ case 1: return QE_CR_SUBBLOCK_UCCFAST2; ++ case 2: return QE_CR_SUBBLOCK_UCCFAST3; ++ case 3: return QE_CR_SUBBLOCK_UCCFAST4; ++ case 4: return QE_CR_SUBBLOCK_UCCFAST5; ++ case 5: return QE_CR_SUBBLOCK_UCCFAST6; ++ case 6: return QE_CR_SUBBLOCK_UCCFAST7; ++ case 7: return QE_CR_SUBBLOCK_UCCFAST8; ++ default: return QE_CR_SUBBLOCK_INVALID; ++ } ++} ++ ++static void ucc_get_cmxucr_reg(int ucc_num, volatile u32 **p_cmxucr, ++ u8 *reg_num, u8 *shift) ++{ ++ switch (ucc_num) { ++ case 0: /* UCC1 */ ++ *p_cmxucr = &(qe_immr->qmx.cmxucr1); ++ *reg_num = 1; ++ *shift = 16; ++ break; ++ case 2: /* UCC3 */ ++ *p_cmxucr = &(qe_immr->qmx.cmxucr1); ++ *reg_num = 1; ++ *shift = 0; ++ break; ++ case 4: /* UCC5 */ ++ *p_cmxucr = &(qe_immr->qmx.cmxucr2); ++ *reg_num = 2; ++ *shift = 16; ++ break; ++ case 6: /* UCC7 */ ++ *p_cmxucr = &(qe_immr->qmx.cmxucr2); ++ *reg_num = 2; ++ *shift = 0; ++ break; ++ case 1: /* UCC2 */ ++ *p_cmxucr = &(qe_immr->qmx.cmxucr3); ++ *reg_num = 3; ++ *shift = 16; ++ break; ++ case 3: /* UCC4 */ ++ *p_cmxucr = &(qe_immr->qmx.cmxucr3); ++ *reg_num = 3; ++ *shift = 0; ++ break; ++ case 5: /* UCC6 */ ++ *p_cmxucr = &(qe_immr->qmx.cmxucr4); ++ *reg_num = 4; ++ *shift = 16; ++ break; ++ case 7: /* UCC8 */ ++ *p_cmxucr = &(qe_immr->qmx.cmxucr4); ++ *reg_num = 4; ++ *shift = 0; ++ break; ++ default: ++ break; ++ } ++} ++ ++static int ucc_set_clk_src(int ucc_num, qe_clock_e clock, comm_dir_e mode) ++{ ++ volatile u32 *p_cmxucr = NULL; ++ u8 reg_num = 0; ++ u8 shift = 0; ++ u32 clockBits; ++ u32 clockMask; ++ int source = -1; ++ ++ /* check if the UCC number is in range. */ ++ if ((ucc_num > UCC_MAX_NUM - 1) || (ucc_num < 0)) ++ return -EINVAL; ++ ++ if (! ((mode == COMM_DIR_RX) || (mode == COMM_DIR_TX))) { ++ printf("%s: bad comm mode type passed\n", __FUNCTION__); ++ return -EINVAL; ++ } ++ ++ ucc_get_cmxucr_reg(ucc_num, &p_cmxucr, ®_num, &shift); ++ ++ switch (reg_num) { ++ case 1: ++ switch (clock) { ++ case QE_BRG1: source = 1; break; ++ case QE_BRG2: source = 2; break; ++ case QE_BRG7: source = 3; break; ++ case QE_BRG8: source = 4; break; ++ case QE_CLK9: source = 5; break; ++ case QE_CLK10: source = 6; break; ++ case QE_CLK11: source = 7; break; ++ case QE_CLK12: source = 8; break; ++ case QE_CLK15: source = 9; break; ++ case QE_CLK16: source = 10; break; ++ default: source = -1; break; ++ } ++ break; ++ case 2: ++ switch (clock) { ++ case QE_BRG5: source = 1; break; ++ case QE_BRG6: source = 2; break; ++ case QE_BRG7: source = 3; break; ++ case QE_BRG8: source = 4; break; ++ case QE_CLK13: source = 5; break; ++ case QE_CLK14: source = 6; break; ++ case QE_CLK19: source = 7; break; ++ case QE_CLK20: source = 8; break; ++ case QE_CLK15: source = 9; break; ++ case QE_CLK16: source = 10; break; ++ default: source = -1; break; ++ } ++ break; ++ case 3: ++ switch (clock) { ++ case QE_BRG9: source = 1; break; ++ case QE_BRG10: source = 2; break; ++ case QE_BRG15: source = 3; break; ++ case QE_BRG16: source = 4; break; ++ case QE_CLK3: source = 5; break; ++ case QE_CLK4: source = 6; break; ++ case QE_CLK17: source = 7; break; ++ case QE_CLK18: source = 8; break; ++ case QE_CLK7: source = 9; break; ++ case QE_CLK8: source = 10; break; ++ case QE_CLK16: source = 11; break; ++ default: source = -1; break; ++ } ++ break; ++ case 4: ++ switch (clock) { ++ case QE_BRG13: source = 1; break; ++ case QE_BRG14: source = 2; break; ++ case QE_BRG15: source = 3; break; ++ case QE_BRG16: source = 4; break; ++ case QE_CLK5: source = 5; break; ++ case QE_CLK6: source = 6; break; ++ case QE_CLK21: source = 7; break; ++ case QE_CLK22: source = 8; break; ++ case QE_CLK7: source = 9; break; ++ case QE_CLK8: source = 10; break; ++ case QE_CLK16: source = 11; break; ++ default: source = -1; break; ++ } ++ break; ++ default: ++ source = -1; ++ break; ++ } ++ ++ if (source == -1) { ++ printf("%s: Bad combination of clock and UCC\n", __FUNCTION__); ++ return -ENOENT; ++ } ++ ++ clockBits = (u32) source; ++ clockMask = QE_CMXUCR_TX_CLK_SRC_MASK; ++ if (mode == COMM_DIR_RX) { ++ clockBits <<= 4; /* Rx field is 4 bits to left of Tx field */ ++ clockMask <<= 4; /* Rx field is 4 bits to left of Tx field */ ++ } ++ clockBits <<= shift; ++ clockMask <<= shift; ++ ++ out_be32(p_cmxucr, (in_be32(p_cmxucr) & ~clockMask) | clockBits); ++ ++ return 0; ++} ++ ++static uint ucc_get_reg_baseaddr(int ucc_num) ++{ ++ uint base = 0; ++ ++ /* check if the UCC number is in range */ ++ if ((ucc_num > UCC_MAX_NUM - 1) || (ucc_num < 0)) { ++ printf("%s: the UCC num not in ranges\n", __FUNCTION__); ++ return 0; ++ } ++ ++ switch (ucc_num) { ++ case 0: base = 0x00002000; break; ++ case 1: base = 0x00003000; break; ++ case 2: base = 0x00002200; break; ++ case 3: base = 0x00003200; break; ++ case 4: base = 0x00002400; break; ++ case 5: base = 0x00003400; break; ++ case 6: base = 0x00002600; break; ++ case 7: base = 0x00003600; break; ++ default: break; ++ } ++ ++ base = (uint)qe_immr + base; ++ return base; ++} ++ ++void ucc_fast_enable(ucc_fast_private_t *uccf, comm_dir_e mode) ++{ ++ ucc_fast_t *uf_regs; ++ u32 gumr; ++ ++ uf_regs = uccf->uf_regs; ++ ++ /* Enable reception and/or transmission on this UCC. */ ++ gumr = in_be32(&uf_regs->gumr); ++ if (mode & COMM_DIR_TX) { ++ gumr |= UCC_FAST_GUMR_ENT; ++ uccf->enabled_tx = 1; ++ } ++ if (mode & COMM_DIR_RX) { ++ gumr |= UCC_FAST_GUMR_ENR; ++ uccf->enabled_rx = 1; ++ } ++ out_be32(&uf_regs->gumr, gumr); ++} ++ ++void ucc_fast_disable(ucc_fast_private_t *uccf, comm_dir_e mode) ++{ ++ ucc_fast_t *uf_regs; ++ u32 gumr; ++ ++ uf_regs = uccf->uf_regs; ++ ++ /* Disable reception and/or transmission on this UCC. */ ++ gumr = in_be32(&uf_regs->gumr); ++ if (mode & COMM_DIR_TX) { ++ gumr &= ~UCC_FAST_GUMR_ENT; ++ uccf->enabled_tx = 0; ++ } ++ if (mode & COMM_DIR_RX) { ++ gumr &= ~UCC_FAST_GUMR_ENR; ++ uccf->enabled_rx = 0; ++ } ++ out_be32(&uf_regs->gumr, gumr); ++} ++ ++int ucc_fast_init(ucc_fast_info_t *uf_info, ucc_fast_private_t **uccf_ret) ++{ ++ ucc_fast_private_t *uccf; ++ ucc_fast_t *uf_regs; ++ ++ if (!uf_info) ++ return -EINVAL; ++ ++ if ((uf_info->ucc_num < 0) || (uf_info->ucc_num > UCC_MAX_NUM - 1)) { ++ printf("%s: Illagal UCC number!\n", __FUNCTION__); ++ return -EINVAL; ++ } ++ ++ uccf = (ucc_fast_private_t *)malloc(sizeof(ucc_fast_private_t)); ++ if (!uccf) { ++ printf("%s: No memory for UCC fast data structure!\n", ++ __FUNCTION__); ++ return -ENOMEM; ++ } ++ memset(uccf, 0, sizeof(ucc_fast_private_t)); ++ ++ /* Save fast UCC structure */ ++ uccf->uf_info = uf_info; ++ uccf->uf_regs = (ucc_fast_t *)ucc_get_reg_baseaddr(uf_info->ucc_num); ++ ++ if (uccf->uf_regs == NULL) { ++ printf("%s: No memory map for UCC fast controller!\n", ++ __FUNCTION__); ++ return -ENOMEM; ++ } ++ ++ uccf->enabled_tx = 0; ++ uccf->enabled_rx = 0; ++ ++ uf_regs = uccf->uf_regs; ++ uccf->p_ucce = (u32 *) &(uf_regs->ucce); ++ uccf->p_uccm = (u32 *) &(uf_regs->uccm); ++ ++ /* Init GUEMR register, UCC both Rx and Tx is Fast protocol */ ++ out_8(&uf_regs->guemr, UCC_GUEMR_SET_RESERVED3 | UCC_GUEMR_MODE_FAST_RX ++ | UCC_GUEMR_MODE_FAST_TX); ++ ++ /* Set GUMR, disable UCC both Rx and Tx, Ethernet protocol */ ++ out_be32(&uf_regs->gumr, UCC_FAST_GUMR_ETH); ++ ++ /* Set the Giga ethernet VFIFO stuff */ ++ if (uf_info->eth_type == GIGA_ETH) { ++ /* Allocate memory for Tx Virtual Fifo */ ++ uccf->ucc_fast_tx_virtual_fifo_base_offset = ++ qe_muram_alloc(UCC_GETH_UTFS_GIGA_INIT, ++ UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT); ++ ++ /* Allocate memory for Rx Virtual Fifo */ ++ uccf->ucc_fast_rx_virtual_fifo_base_offset = ++ qe_muram_alloc(UCC_GETH_URFS_GIGA_INIT + ++ UCC_FAST_RX_VIRTUAL_FIFO_SIZE_PAD, ++ UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT); ++ ++ /* utfb, urfb are offsets from MURAM base */ ++ out_be32(&uf_regs->utfb, ++ uccf->ucc_fast_tx_virtual_fifo_base_offset); ++ out_be32(&uf_regs->urfb, ++ uccf->ucc_fast_rx_virtual_fifo_base_offset); ++ ++ /* Set Virtual Fifo registers */ ++ out_be16(&uf_regs->urfs, UCC_GETH_URFS_GIGA_INIT); ++ out_be16(&uf_regs->urfet, UCC_GETH_URFET_GIGA_INIT); ++ out_be16(&uf_regs->urfset, UCC_GETH_URFSET_GIGA_INIT); ++ out_be16(&uf_regs->utfs, UCC_GETH_UTFS_GIGA_INIT); ++ out_be16(&uf_regs->utfet, UCC_GETH_UTFET_GIGA_INIT); ++ out_be16(&uf_regs->utftt, UCC_GETH_UTFTT_GIGA_INIT); ++ } ++ ++ /* Set the Fast ethernet VFIFO stuff */ ++ if (uf_info->eth_type == FAST_ETH) { ++ /* Allocate memory for Tx Virtual Fifo */ ++ uccf->ucc_fast_tx_virtual_fifo_base_offset = ++ qe_muram_alloc(UCC_GETH_UTFS_INIT, ++ UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT); ++ ++ /* Allocate memory for Rx Virtual Fifo */ ++ uccf->ucc_fast_rx_virtual_fifo_base_offset = ++ qe_muram_alloc(UCC_GETH_URFS_INIT + ++ UCC_FAST_RX_VIRTUAL_FIFO_SIZE_PAD, ++ UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT); ++ ++ /* utfb, urfb are offsets from MURAM base */ ++ out_be32(&uf_regs->utfb, ++ uccf->ucc_fast_tx_virtual_fifo_base_offset); ++ out_be32(&uf_regs->urfb, ++ uccf->ucc_fast_rx_virtual_fifo_base_offset); ++ ++ /* Set Virtual Fifo registers */ ++ out_be16(&uf_regs->urfs, UCC_GETH_URFS_INIT); ++ out_be16(&uf_regs->urfet, UCC_GETH_URFET_INIT); ++ out_be16(&uf_regs->urfset, UCC_GETH_URFSET_INIT); ++ out_be16(&uf_regs->utfs, UCC_GETH_UTFS_INIT); ++ out_be16(&uf_regs->utfet, UCC_GETH_UTFET_INIT); ++ out_be16(&uf_regs->utftt, UCC_GETH_UTFTT_INIT); ++ } ++ ++ /* Rx clock routing */ ++ if (uf_info->rx_clock != QE_CLK_NONE) { ++ if (ucc_set_clk_src(uf_info->ucc_num, ++ uf_info->rx_clock, COMM_DIR_RX)) { ++ printf("%s: Illegal value for parameter 'RxClock'.\n", ++ __FUNCTION__); ++ return -EINVAL; ++ } ++ } ++ ++ /* Tx clock routing */ ++ if (uf_info->tx_clock != QE_CLK_NONE) { ++ if (ucc_set_clk_src(uf_info->ucc_num, ++ uf_info->tx_clock, COMM_DIR_TX)) { ++ printf("%s: Illegal value for parameter 'TxClock'.\n", ++ __FUNCTION__); ++ return -EINVAL; ++ } ++ } ++ ++ /* Clear interrupt mask register to disable all of interrupts */ ++ out_be32(&uf_regs->uccm, 0x0); ++ ++ /* Writing '1' to clear all of envents */ ++ out_be32(&uf_regs->ucce, 0xffffffff); ++ ++ *uccf_ret = uccf; ++ return 0; ++} ++#endif /* CONFIG_QE */ +diff -Naupr u-boot-1.1.6/drivers/qe/uccf.h u-boot-1.1.6-fsl-1/drivers/qe/uccf.h +--- u-boot-1.1.6/drivers/qe/uccf.h 1969-12-31 18:00:00.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/drivers/qe/uccf.h 2006-11-10 11:24:29.000000000 -0600 +@@ -0,0 +1,130 @@ ++/* ++ * Copyright (C) 2006 Freescale Semiconductor, Inc. ++ * ++ * Dave Liu <daveliu@freescale.com> ++ * based on source code of Shlomi Gridish ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#ifndef __UCCF_H__ ++#define __UCCF_H__ ++ ++#include "common.h" ++#include "qe.h" ++ ++/* Fast or Giga ethernet ++*/ ++typedef enum enet_type { ++ FAST_ETH, ++ GIGA_ETH, ++} enet_type_e; ++ ++/* General UCC Extended Mode Register ++*/ ++#define UCC_GUEMR_MODE_MASK_RX 0x02 ++#define UCC_GUEMR_MODE_MASK_TX 0x01 ++#define UCC_GUEMR_MODE_FAST_RX 0x02 ++#define UCC_GUEMR_MODE_FAST_TX 0x01 ++#define UCC_GUEMR_MODE_SLOW_RX 0x00 ++#define UCC_GUEMR_MODE_SLOW_TX 0x00 ++#define UCC_GUEMR_SET_RESERVED3 0x10 /* Bit 3 must be set 1 */ ++ ++/* General UCC FAST Mode Register ++*/ ++#define UCC_FAST_GUMR_TCI 0x20000000 ++#define UCC_FAST_GUMR_TRX 0x10000000 ++#define UCC_FAST_GUMR_TTX 0x08000000 ++#define UCC_FAST_GUMR_CDP 0x04000000 ++#define UCC_FAST_GUMR_CTSP 0x02000000 ++#define UCC_FAST_GUMR_CDS 0x01000000 ++#define UCC_FAST_GUMR_CTSS 0x00800000 ++#define UCC_FAST_GUMR_TXSY 0x00020000 ++#define UCC_FAST_GUMR_RSYN 0x00010000 ++#define UCC_FAST_GUMR_RTSM 0x00002000 ++#define UCC_FAST_GUMR_REVD 0x00000400 ++#define UCC_FAST_GUMR_ENR 0x00000020 ++#define UCC_FAST_GUMR_ENT 0x00000010 ++ ++/* GUMR [MODE] bit maps ++*/ ++#define UCC_FAST_GUMR_HDLC 0x00000000 ++#define UCC_FAST_GUMR_QMC 0x00000002 ++#define UCC_FAST_GUMR_UART 0x00000004 ++#define UCC_FAST_GUMR_BISYNC 0x00000008 ++#define UCC_FAST_GUMR_ATM 0x0000000a ++#define UCC_FAST_GUMR_ETH 0x0000000c ++ ++/* Transmit On Demand (UTORD) ++*/ ++#define UCC_SLOW_TOD 0x8000 ++#define UCC_FAST_TOD 0x8000 ++ ++/* Fast Ethernet (10/100 Mbps) ++*/ ++#define UCC_GETH_URFS_INIT 512 /* Rx virtual FIFO size */ ++#define UCC_GETH_URFET_INIT 256 /* 1/2 urfs */ ++#define UCC_GETH_URFSET_INIT 384 /* 3/4 urfs */ ++#define UCC_GETH_UTFS_INIT 512 /* Tx virtual FIFO size */ ++#define UCC_GETH_UTFET_INIT 256 /* 1/2 utfs */ ++#define UCC_GETH_UTFTT_INIT 128 ++ ++/* Gigabit Ethernet (1000 Mbps) ++*/ ++#define UCC_GETH_URFS_GIGA_INIT 4096/*2048*/ /* Rx virtual FIFO size */ ++#define UCC_GETH_URFET_GIGA_INIT 2048/*1024*/ /* 1/2 urfs */ ++#define UCC_GETH_URFSET_GIGA_INIT 3072/*1536*/ /* 3/4 urfs */ ++#define UCC_GETH_UTFS_GIGA_INIT 8192/*2048*/ /* Tx virtual FIFO size */ ++#define UCC_GETH_UTFET_GIGA_INIT 4096/*1024*/ /* 1/2 utfs */ ++#define UCC_GETH_UTFTT_GIGA_INIT 0x400/*0x40*/ /* */ ++ ++/* UCC fast alignment ++*/ ++#define UCC_FAST_RX_ALIGN 4 ++#define UCC_FAST_MRBLR_ALIGNMENT 4 ++#define UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT 8 ++ ++/* Sizes ++*/ ++#define UCC_FAST_RX_VIRTUAL_FIFO_SIZE_PAD 8 ++ ++/* UCC fast structure. ++*/ ++typedef struct ucc_fast_info { ++ int ucc_num; ++ qe_clock_e rx_clock; ++ qe_clock_e tx_clock; ++ enet_type_e eth_type; ++} ucc_fast_info_t; ++ ++typedef struct ucc_fast_private { ++ ucc_fast_info_t *uf_info; ++ ucc_fast_t *uf_regs; /* a pointer to memory map of UCC regs */ ++ u32 *p_ucce; /* a pointer to the event register */ ++ u32 *p_uccm; /* a pointer to the mask register */ ++ int enabled_tx; /* whether UCC is enabled for Tx (ENT) */ ++ int enabled_rx; /* whether UCC is enabled for Rx (ENR) */ ++ u32 ucc_fast_tx_virtual_fifo_base_offset; ++ u32 ucc_fast_rx_virtual_fifo_base_offset; ++} ucc_fast_private_t; ++ ++void ucc_fast_transmit_on_demand(ucc_fast_private_t *uccf); ++u32 ucc_fast_get_qe_cr_subblock(int ucc_num); ++void ucc_fast_enable(ucc_fast_private_t *uccf, comm_dir_e mode); ++void ucc_fast_disable(ucc_fast_private_t *uccf, comm_dir_e mode); ++int ucc_fast_init(ucc_fast_info_t *uf_info, ucc_fast_private_t **uccf_ret); ++ ++#endif /* __UCCF_H__ */ +diff -Naupr u-boot-1.1.6/drivers/qe/uec.c u-boot-1.1.6-fsl-1/drivers/qe/uec.c +--- u-boot-1.1.6/drivers/qe/uec.c 1969-12-31 18:00:00.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/drivers/qe/uec.c 2006-11-10 11:24:29.000000000 -0600 +@@ -0,0 +1,1266 @@ ++/* ++ * Copyright (C) 2006 Freescale Semiconductor, Inc. ++ * ++ * Dave Liu <daveliu@freescale.com> ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#include "common.h" ++#include "net.h" ++#include "malloc.h" ++#include "asm/errno.h" ++#include "asm/io.h" ++#include "asm/immap_qe.h" ++#include "qe.h" ++#include "uccf.h" ++#include "uec.h" ++#include "uec_phy.h" ++ ++#if defined(CONFIG_QE) ++ ++#ifdef CONFIG_UEC_ETH1 ++static uec_info_t eth1_uec_info = { ++ .uf_info = { ++ .ucc_num = CFG_UEC1_UCC_NUM, ++ .rx_clock = CFG_UEC1_RX_CLK, ++ .tx_clock = CFG_UEC1_TX_CLK, ++ .eth_type = CFG_UEC1_ETH_TYPE, ++ }, ++ .num_threads_tx = UEC_NUM_OF_THREADS_4, ++ .num_threads_rx = UEC_NUM_OF_THREADS_4, ++ .riscTx = QE_RISC_ALLOCATION_RISC1_AND_RISC2, ++ .riscRx = QE_RISC_ALLOCATION_RISC1_AND_RISC2, ++ .tx_bd_ring_len = 16, ++ .rx_bd_ring_len = 16, ++ .phy_address = CFG_UEC1_PHY_ADDR, ++ .enet_interface = CFG_UEC1_INTERFACE_MODE, ++}; ++#endif ++#ifdef CONFIG_UEC_ETH2 ++static uec_info_t eth2_uec_info = { ++ .uf_info = { ++ .ucc_num = CFG_UEC2_UCC_NUM, ++ .rx_clock = CFG_UEC2_RX_CLK, ++ .tx_clock = CFG_UEC2_TX_CLK, ++ .eth_type = CFG_UEC2_ETH_TYPE, ++ }, ++ .num_threads_tx = UEC_NUM_OF_THREADS_4, ++ .num_threads_rx = UEC_NUM_OF_THREADS_4, ++ .riscTx = QE_RISC_ALLOCATION_RISC1_AND_RISC2, ++ .riscRx = QE_RISC_ALLOCATION_RISC1_AND_RISC2, ++ .tx_bd_ring_len = 16, ++ .rx_bd_ring_len = 16, ++ .phy_address = CFG_UEC2_PHY_ADDR, ++ .enet_interface = CFG_UEC2_INTERFACE_MODE, ++}; ++#endif ++ ++static int uec_mac_enable(uec_private_t *uec, comm_dir_e mode) ++{ ++ uec_t *uec_regs; ++ u32 maccfg1; ++ ++ if (!uec) { ++ printf("%s: uec not initial\n", __FUNCTION__); ++ return -EINVAL; ++ } ++ uec_regs = uec->uec_regs; ++ ++ maccfg1 = in_be32(&uec_regs->maccfg1); ++ ++ if (mode & COMM_DIR_TX) { ++ maccfg1 |= MACCFG1_ENABLE_TX; ++ out_be32(&uec_regs->maccfg1, maccfg1); ++ uec->mac_tx_enabled = 1; ++ } ++ ++ if (mode & COMM_DIR_RX) { ++ maccfg1 |= MACCFG1_ENABLE_RX; ++ out_be32(&uec_regs->maccfg1, maccfg1); ++ uec->mac_rx_enabled = 1; ++ } ++ ++ return 0; ++} ++ ++static int uec_mac_disable(uec_private_t *uec, comm_dir_e mode) ++{ ++ uec_t *uec_regs; ++ u32 maccfg1; ++ ++ if (!uec) { ++ printf("%s: uec not initial\n", __FUNCTION__); ++ return -EINVAL; ++ } ++ uec_regs = uec->uec_regs; ++ ++ maccfg1 = in_be32(&uec_regs->maccfg1); ++ ++ if (mode & COMM_DIR_TX) { ++ maccfg1 &= ~MACCFG1_ENABLE_TX; ++ out_be32(&uec_regs->maccfg1, maccfg1); ++ uec->mac_tx_enabled = 0; ++ } ++ ++ if (mode & COMM_DIR_RX) { ++ maccfg1 &= ~MACCFG1_ENABLE_RX; ++ out_be32(&uec_regs->maccfg1, maccfg1); ++ uec->mac_rx_enabled = 0; ++ } ++ ++ return 0; ++} ++ ++static int uec_graceful_stop_tx(uec_private_t *uec) ++{ ++ ucc_fast_t *uf_regs; ++ u32 cecr_subblock; ++ u32 ucce; ++ ++ if (!uec || !uec->uccf) { ++ printf("%s: No handle passed.\n", __FUNCTION__); ++ return -EINVAL; ++ } ++ ++ uf_regs = uec->uccf->uf_regs; ++ ++ /* Clear the grace stop event */ ++ out_be32(&uf_regs->ucce, UCCE_GRA); ++ ++ /* Issue host command */ ++ cecr_subblock = ++ ucc_fast_get_qe_cr_subblock(uec->uec_info->uf_info.ucc_num); ++ qe_issue_cmd(QE_GRACEFUL_STOP_TX, cecr_subblock, ++ (u8)QE_CR_PROTOCOL_ETHERNET, 0); ++ ++ /* Wait for command to complete */ ++ do { ++ ucce = in_be32(&uf_regs->ucce); ++ } while (! (ucce & UCCE_GRA)); ++ ++ uec->grace_stopped_tx = 1; ++ ++ return 0; ++} ++ ++static int uec_graceful_stop_rx(uec_private_t *uec) ++{ ++ u32 cecr_subblock; ++ u8 ack; ++ ++ if (!uec) { ++ printf("%s: No handle passed.\n", __FUNCTION__); ++ return -EINVAL; ++ } ++ ++ if (!uec->p_rx_glbl_pram) { ++ printf("%s: No init rx global parameter\n", __FUNCTION__); ++ return -EINVAL; ++ } ++ ++ /* Clear acknowledge bit */ ++ ack = uec->p_rx_glbl_pram->rxgstpack; ++ ack &= ~GRACEFUL_STOP_ACKNOWLEDGE_RX; ++ uec->p_rx_glbl_pram->rxgstpack = ack; ++ ++ /* Keep issuing cmd and checking ack bit until it is asserted */ ++ do { ++ /* Issue host command */ ++ cecr_subblock = ++ ucc_fast_get_qe_cr_subblock(uec->uec_info->uf_info.ucc_num); ++ qe_issue_cmd(QE_GRACEFUL_STOP_RX, cecr_subblock, ++ (u8)QE_CR_PROTOCOL_ETHERNET, 0); ++ ack = uec->p_rx_glbl_pram->rxgstpack; ++ } while (! (ack & GRACEFUL_STOP_ACKNOWLEDGE_RX )); ++ ++ uec->grace_stopped_rx = 1; ++ ++ return 0; ++} ++ ++static int uec_restart_tx(uec_private_t *uec) ++{ ++ u32 cecr_subblock; ++ ++ if (!uec || !uec->uec_info) { ++ printf("%s: No handle passed.\n", __FUNCTION__); ++ return -EINVAL; ++ } ++ ++ cecr_subblock = ++ ucc_fast_get_qe_cr_subblock(uec->uec_info->uf_info.ucc_num); ++ qe_issue_cmd(QE_RESTART_TX, cecr_subblock, ++ (u8)QE_CR_PROTOCOL_ETHERNET, 0); ++ ++ uec->grace_stopped_tx = 0; ++ ++ return 0; ++} ++ ++static int uec_restart_rx(uec_private_t *uec) ++{ ++ u32 cecr_subblock; ++ ++ if (!uec || !uec->uec_info) { ++ printf("%s: No handle passed.\n", __FUNCTION__); ++ return -EINVAL; ++ } ++ ++ cecr_subblock = ++ ucc_fast_get_qe_cr_subblock(uec->uec_info->uf_info.ucc_num); ++ qe_issue_cmd(QE_RESTART_RX, cecr_subblock, ++ (u8)QE_CR_PROTOCOL_ETHERNET, 0); ++ ++ uec->grace_stopped_rx = 0; ++ ++ return 0; ++} ++ ++static int uec_open(uec_private_t *uec, comm_dir_e mode) ++{ ++ ucc_fast_private_t *uccf; ++ ++ if (!uec || !uec->uccf) { ++ printf("%s: No handle passed.\n", __FUNCTION__); ++ return -EINVAL; ++ } ++ uccf = uec->uccf; ++ ++ /* check if the UCC number is in range. */ ++ if (uec->uec_info->uf_info.ucc_num >= UCC_MAX_NUM) { ++ printf("%s: ucc_num out of range.\n", __FUNCTION__); ++ return -EINVAL; ++ } ++ ++ /* Enable MAC */ ++ uec_mac_enable(uec, mode); ++ ++ /* Enable UCC fast */ ++ ucc_fast_enable(uccf, mode); ++ ++ /* RISC microcode start */ ++ if ((mode & COMM_DIR_TX) && uec->grace_stopped_tx) { ++ uec_restart_tx(uec); ++ } ++ if ((mode & COMM_DIR_RX) && uec->grace_stopped_rx) { ++ uec_restart_rx(uec); ++ } ++ ++ return 0; ++} ++ ++static int uec_stop(uec_private_t *uec, comm_dir_e mode) ++{ ++ ucc_fast_private_t *uccf; ++ ++ if (!uec || !uec->uccf) { ++ printf("%s: No handle passed.\n", __FUNCTION__); ++ return -EINVAL; ++ } ++ uccf = uec->uccf; ++ ++ /* check if the UCC number is in range. */ ++ if (uec->uec_info->uf_info.ucc_num >= UCC_MAX_NUM) { ++ printf("%s: ucc_num out of range.\n", __FUNCTION__); ++ return -EINVAL; ++ } ++ /* Stop any transmissions */ ++ if ((mode & COMM_DIR_TX) && !uec->grace_stopped_tx) { ++ uec_graceful_stop_tx(uec); ++ } ++ /* Stop any receptions */ ++ if ((mode & COMM_DIR_RX) && !uec->grace_stopped_rx) { ++ uec_graceful_stop_rx(uec); ++ } ++ ++ /* Disable the UCC fast */ ++ ucc_fast_disable(uec->uccf, mode); ++ ++ /* Disable the MAC */ ++ uec_mac_disable(uec, mode); ++ ++ return 0; ++} ++ ++static int uec_set_mac_duplex(uec_private_t *uec, int duplex) ++{ ++ uec_t *uec_regs; ++ u32 maccfg2; ++ ++ if (!uec) { ++ printf("%s: uec not initial\n", __FUNCTION__); ++ return -EINVAL; ++ } ++ uec_regs = uec->uec_regs; ++ ++ if (duplex == DUPLEX_HALF) { ++ maccfg2 = in_be32(&uec_regs->maccfg2); ++ maccfg2 &= ~MACCFG2_FDX; ++ out_be32(&uec_regs->maccfg2, maccfg2); ++ } ++ ++ if (duplex == DUPLEX_FULL) { ++ maccfg2 = in_be32(&uec_regs->maccfg2); ++ maccfg2 |= MACCFG2_FDX; ++ out_be32(&uec_regs->maccfg2, maccfg2); ++ } ++ ++ return 0; ++} ++ ++static int uec_set_mac_if_mode(uec_private_t *uec, enet_interface_e if_mode) ++{ ++ enet_interface_e enet_if_mode; ++ uec_info_t *uec_info; ++ uec_t *uec_regs; ++ u32 upsmr; ++ u32 maccfg2; ++ ++ if (!uec) { ++ printf("%s: uec not initial\n", __FUNCTION__); ++ return -EINVAL; ++ } ++ ++ uec_info = uec->uec_info; ++ uec_regs = uec->uec_regs; ++ enet_if_mode = if_mode; ++ ++ maccfg2 = in_be32(&uec_regs->maccfg2); ++ maccfg2 &= ~MACCFG2_INTERFACE_MODE_MASK; ++ ++ upsmr = in_be32(&uec->uccf->uf_regs->upsmr); ++ upsmr &= ~(UPSMR_RPM | UPSMR_TBIM | UPSMR_R10M | UPSMR_RMM); ++ ++ switch (enet_if_mode) { ++ case ENET_100_MII: ++ case ENET_10_MII: ++ maccfg2 |= MACCFG2_INTERFACE_MODE_NIBBLE; ++ break; ++ case ENET_1000_GMII: ++ maccfg2 |= MACCFG2_INTERFACE_MODE_BYTE; ++ break; ++ case ENET_1000_TBI: ++ maccfg2 |= MACCFG2_INTERFACE_MODE_BYTE; ++ upsmr |= UPSMR_TBIM; ++ break; ++ case ENET_1000_RTBI: ++ maccfg2 |= MACCFG2_INTERFACE_MODE_BYTE; ++ upsmr |= (UPSMR_RPM | UPSMR_TBIM); ++ break; ++ case ENET_1000_RGMII: ++ maccfg2 |= MACCFG2_INTERFACE_MODE_BYTE; ++ upsmr |= UPSMR_RPM; ++ break; ++ case ENET_100_RGMII: ++ maccfg2 |= MACCFG2_INTERFACE_MODE_NIBBLE; ++ upsmr |= UPSMR_RPM; ++ break; ++ case ENET_10_RGMII: ++ maccfg2 |= MACCFG2_INTERFACE_MODE_NIBBLE; ++ upsmr |= (UPSMR_RPM | UPSMR_R10M); ++ break; ++ case ENET_100_RMII: ++ maccfg2 |= MACCFG2_INTERFACE_MODE_NIBBLE; ++ upsmr |= UPSMR_RMM; ++ break; ++ case ENET_10_RMII: ++ maccfg2 |= MACCFG2_INTERFACE_MODE_NIBBLE; ++ upsmr |= (UPSMR_R10M | UPSMR_RMM); ++ break; ++ default: ++ return -EINVAL; ++ break; ++ } ++ out_be32(&uec_regs->maccfg2, maccfg2); ++ out_be32(&uec->uccf->uf_regs->upsmr, upsmr); ++ ++ return 0; ++} ++ ++static int init_mii_management_configuration(uec_t *uec_regs) ++{ ++ uint timeout = 0x1000; ++ u32 miimcfg = 0; ++ ++ miimcfg = in_be32(&uec_regs->miimcfg); ++ miimcfg |= MIIMCFG_MNGMNT_CLC_DIV_INIT_VALUE; ++ out_be32(&uec_regs->miimcfg, miimcfg); ++ ++ /* Wait until the bus is free */ ++ while ((in_be32(&uec_regs->miimcfg) & MIIMIND_BUSY) && timeout--); ++ if (timeout <= 0) { ++ printf("%s: The MII Bus is stuck!", __FUNCTION__); ++ return -ETIMEDOUT; ++ } ++ ++ return 0; ++} ++ ++static int init_phy(struct eth_device *dev) ++{ ++ uec_private_t *uec; ++ uec_t *uec_regs; ++ struct uec_mii_info *mii_info; ++ struct phy_info *curphy; ++ int err; ++ ++ uec = (uec_private_t *)dev->priv; ++ uec_regs = uec->uec_regs; ++ ++ uec->oldlink = 0; ++ uec->oldspeed = 0; ++ uec->oldduplex = -1; ++ ++ mii_info = malloc(sizeof(*mii_info)); ++ if (!mii_info) { ++ printf("%s: Could not allocate mii_info", dev->name); ++ return -ENOMEM; ++ } ++ memset(mii_info, 0, sizeof(*mii_info)); ++ ++ mii_info->speed = SPEED_1000; ++ mii_info->duplex = DUPLEX_FULL; ++ mii_info->pause = 0; ++ mii_info->link = 1; ++ ++ mii_info->advertising = (ADVERTISED_10baseT_Half | ++ ADVERTISED_10baseT_Full | ++ ADVERTISED_100baseT_Half | ++ ADVERTISED_100baseT_Full | ++ ADVERTISED_1000baseT_Full); ++ mii_info->autoneg = 1; ++ mii_info->mii_id = uec->uec_info->phy_address; ++ mii_info->dev = dev; ++ ++ mii_info->mdio_read = &read_phy_reg; ++ mii_info->mdio_write = &write_phy_reg; ++ ++ uec->mii_info = mii_info; ++ ++ if (init_mii_management_configuration(uec_regs)) { ++ printf("%s: The MII Bus is stuck!", dev->name); ++ err = -1; ++ goto bus_fail; ++ } ++ ++ /* get info for this PHY */ ++ curphy = get_phy_info(uec->mii_info); ++ if (!curphy) { ++ printf("%s: No PHY found", dev->name); ++ err = -1; ++ goto no_phy; ++ } ++ ++ mii_info->phyinfo = curphy; ++ ++ /* Run the commands which initialize the PHY */ ++ if (curphy->init) { ++ err = curphy->init(uec->mii_info); ++ if (err) ++ goto phy_init_fail; ++ } ++ ++ return 0; ++ ++phy_init_fail: ++no_phy: ++bus_fail: ++ free(mii_info); ++ return err; ++} ++ ++static void adjust_link(struct eth_device *dev) ++{ ++ uec_private_t *uec = (uec_private_t *)dev->priv; ++ uec_t *uec_regs; ++ struct uec_mii_info *mii_info = uec->mii_info; ++ ++ extern void change_phy_interface_mode(struct eth_device *dev, ++ enet_interface_e mode); ++ uec_regs = uec->uec_regs; ++ ++ if (mii_info->link) { ++ /* Now we make sure that we can be in full duplex mode. ++ * If not, we operate in half-duplex mode. */ ++ if (mii_info->duplex != uec->oldduplex) { ++ if (!(mii_info->duplex)) { ++ uec_set_mac_duplex(uec, DUPLEX_HALF); ++ printf("%s: Half Duplex\n", dev->name); ++ } else { ++ uec_set_mac_duplex(uec, DUPLEX_FULL); ++ printf("%s: Full Duplex\n", dev->name); ++ } ++ uec->oldduplex = mii_info->duplex; ++ } ++ ++ if (mii_info->speed != uec->oldspeed) { ++ switch (mii_info->speed) { ++ case 1000: ++ break; ++ case 100: ++ printf ("switching to rgmii 100\n"); ++ /* change phy to rgmii 100 */ ++ change_phy_interface_mode(dev, ++ ENET_100_RGMII); ++ /* change the MAC interface mode */ ++ uec_set_mac_if_mode(uec,ENET_100_RGMII); ++ break; ++ case 10: ++ printf ("switching to rgmii 10\n"); ++ /* change phy to rgmii 10 */ ++ change_phy_interface_mode(dev, ++ ENET_10_RGMII); ++ /* change the MAC interface mode */ ++ uec_set_mac_if_mode(uec,ENET_10_RGMII); ++ break; ++ default: ++ printf("%s: Ack,Speed(%d)is illegal\n", ++ dev->name, mii_info->speed); ++ break; ++ } ++ ++ printf("%s: Speed %dBT\n", dev->name, mii_info->speed); ++ uec->oldspeed = mii_info->speed; ++ } ++ ++ if (!uec->oldlink) { ++ printf("%s: Link is up\n", dev->name); ++ uec->oldlink = 1; ++ } ++ ++ } else { /* if (mii_info->link) */ ++ if (uec->oldlink) { ++ printf("%s: Link is down\n", dev->name); ++ uec->oldlink = 0; ++ uec->oldspeed = 0; ++ uec->oldduplex = -1; ++ } ++ } ++} ++ ++static void phy_change(struct eth_device *dev) ++{ ++ uec_private_t *uec = (uec_private_t *)dev->priv; ++ uec_t *uec_regs; ++ int result = 0; ++ ++ uec_regs = uec->uec_regs; ++ ++ /* Delay 5s to give the PHY a chance to change the register state */ ++ udelay(5000000); ++ ++ /* Update the link, speed, duplex */ ++ result = uec->mii_info->phyinfo->read_status(uec->mii_info); ++ ++ /* Adjust the interface according to speed */ ++ if ((0 == result) || (uec->mii_info->link == 0)) { ++ adjust_link(dev); ++ } ++} ++ ++static int uec_set_mac_address(uec_private_t *uec, u8 *mac_addr) ++{ ++ uec_t *uec_regs; ++ u32 mac_addr1; ++ u32 mac_addr2; ++ ++ if (!uec) { ++ printf("%s: uec not initial\n", __FUNCTION__); ++ return -EINVAL; ++ } ++ ++ uec_regs = uec->uec_regs; ++ ++ /* if a station address of 0x12345678ABCD, perform a write to ++ MACSTNADDR1 of 0xCDAB7856, ++ MACSTNADDR2 of 0x34120000 */ ++ ++ mac_addr1 = (mac_addr[5] << 24) | (mac_addr[4] << 16) | \ ++ (mac_addr[3] << 8) | (mac_addr[2]); ++ out_be32(&uec_regs->macstnaddr1, mac_addr1); ++ ++ mac_addr2 = ((mac_addr[1] << 24) | (mac_addr[0] << 16)) & 0xffff0000; ++ out_be32(&uec_regs->macstnaddr2, mac_addr2); ++ ++ return 0; ++} ++ ++static int uec_convert_threads_num(uec_num_of_threads_e threads_num, ++ int *threads_num_ret) ++{ ++ int num_threads_numerica; ++ ++ switch (threads_num) { ++ case UEC_NUM_OF_THREADS_1: ++ num_threads_numerica = 1; ++ break; ++ case UEC_NUM_OF_THREADS_2: ++ num_threads_numerica = 2; ++ break; ++ case UEC_NUM_OF_THREADS_4: ++ num_threads_numerica = 4; ++ break; ++ case UEC_NUM_OF_THREADS_6: ++ num_threads_numerica = 6; ++ break; ++ case UEC_NUM_OF_THREADS_8: ++ num_threads_numerica = 8; ++ break; ++ default: ++ printf("%s: Bad number of threads value.", ++ __FUNCTION__); ++ return -EINVAL; ++ } ++ ++ *threads_num_ret = num_threads_numerica; ++ ++ return 0; ++} ++ ++static void uec_init_tx_parameter(uec_private_t *uec, int num_threads_tx) ++{ ++ uec_info_t *uec_info; ++ u32 end_bd; ++ u8 bmrx = 0; ++ int i; ++ ++ uec_info = uec->uec_info; ++ ++ /* Alloc global Tx parameter RAM page */ ++ uec->tx_glbl_pram_offset = qe_muram_alloc( ++ sizeof(uec_tx_global_pram_t), ++ UEC_TX_GLOBAL_PRAM_ALIGNMENT); ++ uec->p_tx_glbl_pram = (uec_tx_global_pram_t *) ++ qe_muram_addr(uec->tx_glbl_pram_offset); ++ ++ /* Zero the global Tx prameter RAM */ ++ memset(uec->p_tx_glbl_pram, 0, sizeof(uec_tx_global_pram_t)); ++ ++ /* Init global Tx parameter RAM */ ++ ++ /* TEMODER, RMON statistics disable, one Tx queue */ ++ out_be16(&uec->p_tx_glbl_pram->temoder, TEMODER_INIT_VALUE); ++ ++ /* SQPTR */ ++ uec->send_q_mem_reg_offset = qe_muram_alloc( ++ sizeof(uec_send_queue_qd_t), ++ UEC_SEND_QUEUE_QUEUE_DESCRIPTOR_ALIGNMENT); ++ uec->p_send_q_mem_reg = (uec_send_queue_mem_region_t *) ++ qe_muram_addr(uec->send_q_mem_reg_offset); ++ out_be32(&uec->p_tx_glbl_pram->sqptr, uec->send_q_mem_reg_offset); ++ ++ /* Setup the table with TxBDs ring */ ++ end_bd = (u32)uec->p_tx_bd_ring + (uec_info->tx_bd_ring_len - 1) ++ * SIZEOFBD; ++ out_be32(&uec->p_send_q_mem_reg->sqqd[0].bd_ring_base, ++ (u32)(uec->p_tx_bd_ring)); ++ out_be32(&uec->p_send_q_mem_reg->sqqd[0].last_bd_completed_address, ++ end_bd); ++ ++ /* Scheduler Base Pointer, we have only one Tx queue, no need it */ ++ out_be32(&uec->p_tx_glbl_pram->schedulerbasepointer, 0); ++ ++ /* TxRMON Base Pointer, TxRMON disable, we don't need it */ ++ out_be32(&uec->p_tx_glbl_pram->txrmonbaseptr, 0); ++ ++ /* TSTATE, global snooping, big endian, the CSB bus selected */ ++ bmrx = BMR_INIT_VALUE; ++ out_be32(&uec->p_tx_glbl_pram->tstate, ((u32)(bmrx) << BMR_SHIFT)); ++ ++ /* IPH_Offset */ ++ for (i = 0; i < MAX_IPH_OFFSET_ENTRY; i++) { ++ out_8(&uec->p_tx_glbl_pram->iphoffset[i], 0); ++ } ++ ++ /* VTAG table */ ++ for (i = 0; i < UEC_TX_VTAG_TABLE_ENTRY_MAX; i++) { ++ out_be32(&uec->p_tx_glbl_pram->vtagtable[i], 0); ++ } ++ ++ /* TQPTR */ ++ uec->thread_dat_tx_offset = qe_muram_alloc( ++ num_threads_tx * sizeof(uec_thread_data_tx_t) + ++ 32 *(num_threads_tx == 1), UEC_THREAD_DATA_ALIGNMENT); ++ ++ uec->p_thread_data_tx = (uec_thread_data_tx_t *) ++ qe_muram_addr(uec->thread_dat_tx_offset); ++ out_be32(&uec->p_tx_glbl_pram->tqptr, uec->thread_dat_tx_offset); ++} ++ ++static void uec_init_rx_parameter(uec_private_t *uec, int num_threads_rx) ++{ ++ u8 bmrx = 0; ++ int i; ++ uec_82xx_address_filtering_pram_t *p_af_pram; ++ ++ /* Allocate global Rx parameter RAM page */ ++ uec->rx_glbl_pram_offset = qe_muram_alloc( ++ sizeof(uec_rx_global_pram_t), UEC_RX_GLOBAL_PRAM_ALIGNMENT); ++ uec->p_rx_glbl_pram = (uec_rx_global_pram_t *) ++ qe_muram_addr(uec->rx_glbl_pram_offset); ++ ++ /* Zero Global Rx parameter RAM */ ++ memset(uec->p_rx_glbl_pram, 0, sizeof(uec_rx_global_pram_t)); ++ ++ /* Init global Rx parameter RAM */ ++ /* REMODER, Extended feature mode disable, VLAN disable, ++ LossLess flow control disable, Receive firmware statisic disable, ++ Extended address parsing mode disable, One Rx queues, ++ Dynamic maximum/minimum frame length disable, IP checksum check ++ disable, IP address alignment disable ++ */ ++ out_be32(&uec->p_rx_glbl_pram->remoder, REMODER_INIT_VALUE); ++ ++ /* RQPTR */ ++ uec->thread_dat_rx_offset = qe_muram_alloc( ++ num_threads_rx * sizeof(uec_thread_data_rx_t), ++ UEC_THREAD_DATA_ALIGNMENT); ++ uec->p_thread_data_rx = (uec_thread_data_rx_t *) ++ qe_muram_addr(uec->thread_dat_rx_offset); ++ out_be32(&uec->p_rx_glbl_pram->rqptr, uec->thread_dat_rx_offset); ++ ++ /* Type_or_Len */ ++ out_be16(&uec->p_rx_glbl_pram->typeorlen, 3072); ++ ++ /* RxRMON base pointer, we don't need it */ ++ out_be32(&uec->p_rx_glbl_pram->rxrmonbaseptr, 0); ++ ++ /* IntCoalescingPTR, we don't need it, no interrupt */ ++ out_be32(&uec->p_rx_glbl_pram->intcoalescingptr, 0); ++ ++ /* RSTATE, global snooping, big endian, the CSB bus selected */ ++ bmrx = BMR_INIT_VALUE; ++ out_8(&uec->p_rx_glbl_pram->rstate, bmrx); ++ ++ /* MRBLR */ ++ out_be16(&uec->p_rx_glbl_pram->mrblr, MAX_RXBUF_LEN); ++ ++ /* RBDQPTR */ ++ uec->rx_bd_qs_tbl_offset = qe_muram_alloc( ++ sizeof(uec_rx_bd_queues_entry_t) + \ ++ sizeof(uec_rx_prefetched_bds_t), ++ UEC_RX_BD_QUEUES_ALIGNMENT); ++ uec->p_rx_bd_qs_tbl = (uec_rx_bd_queues_entry_t *) ++ qe_muram_addr(uec->rx_bd_qs_tbl_offset); ++ ++ /* Zero it */ ++ memset(uec->p_rx_bd_qs_tbl, 0, sizeof(uec_rx_bd_queues_entry_t) + \ ++ sizeof(uec_rx_prefetched_bds_t)); ++ out_be32(&uec->p_rx_glbl_pram->rbdqptr, uec->rx_bd_qs_tbl_offset); ++ out_be32(&uec->p_rx_bd_qs_tbl->externalbdbaseptr, ++ (u32)uec->p_rx_bd_ring); ++ ++ /* MFLR */ ++ out_be16(&uec->p_rx_glbl_pram->mflr, MAX_FRAME_LEN); ++ /* MINFLR */ ++ out_be16(&uec->p_rx_glbl_pram->minflr, MIN_FRAME_LEN); ++ /* MAXD1 */ ++ out_be16(&uec->p_rx_glbl_pram->maxd1, MAX_DMA1_LEN); ++ /* MAXD2 */ ++ out_be16(&uec->p_rx_glbl_pram->maxd2, MAX_DMA2_LEN); ++ /* ECAM_PTR */ ++ out_be32(&uec->p_rx_glbl_pram->ecamptr, 0); ++ /* L2QT */ ++ out_be32(&uec->p_rx_glbl_pram->l2qt, 0); ++ /* L3QT */ ++ for (i = 0; i < 8; i++) { ++ out_be32(&uec->p_rx_glbl_pram->l3qt[i], 0); ++ } ++ ++ /* VLAN_TYPE */ ++ out_be16(&uec->p_rx_glbl_pram->vlantype, 0x8100); ++ /* TCI */ ++ out_be16(&uec->p_rx_glbl_pram->vlantci, 0); ++ ++ /* Clear PQ2 style address filtering hash table */ ++ p_af_pram = (uec_82xx_address_filtering_pram_t *) \ ++ uec->p_rx_glbl_pram->addressfiltering; ++ ++ p_af_pram->iaddr_h = 0; ++ p_af_pram->iaddr_l = 0; ++ p_af_pram->gaddr_h = 0; ++ p_af_pram->gaddr_l = 0; ++} ++ ++static int uec_issue_init_enet_rxtx_cmd(uec_private_t *uec, ++ int thread_tx, int thread_rx) ++{ ++ uec_init_cmd_pram_t *p_init_enet_param; ++ u32 init_enet_param_offset; ++ uec_info_t *uec_info; ++ int i; ++ int snum; ++ u32 init_enet_offset; ++ u32 entry_val; ++ u32 command; ++ u32 cecr_subblock; ++ ++ uec_info = uec->uec_info; ++ ++ /* Allocate init enet command parameter */ ++ uec->init_enet_param_offset = qe_muram_alloc( ++ sizeof(uec_init_cmd_pram_t), 4); ++ init_enet_param_offset = uec->init_enet_param_offset; ++ uec->p_init_enet_param = (uec_init_cmd_pram_t *) ++ qe_muram_addr(uec->init_enet_param_offset); ++ ++ /* Zero init enet command struct */ ++ memset((void *)uec->p_init_enet_param, 0, sizeof(uec_init_cmd_pram_t)); ++ ++ /* Init the command struct */ ++ p_init_enet_param = uec->p_init_enet_param; ++ p_init_enet_param->resinit0 = ENET_INIT_PARAM_MAGIC_RES_INIT0; ++ p_init_enet_param->resinit1 = ENET_INIT_PARAM_MAGIC_RES_INIT1; ++ p_init_enet_param->resinit2 = ENET_INIT_PARAM_MAGIC_RES_INIT2; ++ p_init_enet_param->resinit3 = ENET_INIT_PARAM_MAGIC_RES_INIT3; ++ p_init_enet_param->resinit4 = ENET_INIT_PARAM_MAGIC_RES_INIT4; ++ p_init_enet_param->largestexternallookupkeysize = 0; ++ ++ p_init_enet_param->rgftgfrxglobal |= ((u32)uec_info->num_threads_rx) ++ << ENET_INIT_PARAM_RGF_SHIFT; ++ p_init_enet_param->rgftgfrxglobal |= ((u32)uec_info->num_threads_tx) ++ << ENET_INIT_PARAM_TGF_SHIFT; ++ ++ /* Init Rx global parameter pointer */ ++ p_init_enet_param->rgftgfrxglobal |= uec->rx_glbl_pram_offset | ++ (u32)uec_info->riscRx; ++ ++ /* Init Rx threads */ ++ for (i = 0; i < (thread_rx + 1); i++) { ++ if ((snum = qe_get_snum()) < 0) { ++ printf("%s can not get snum\n", __FUNCTION__); ++ return -ENOMEM; ++ } ++ ++ if (i==0) { ++ init_enet_offset = 0; ++ } else { ++ init_enet_offset = qe_muram_alloc( ++ sizeof(uec_thread_rx_pram_t), ++ UEC_THREAD_RX_PRAM_ALIGNMENT); ++ } ++ ++ entry_val = ((u32)snum << ENET_INIT_PARAM_SNUM_SHIFT) | ++ init_enet_offset | (u32)uec_info->riscRx; ++ p_init_enet_param->rxthread[i] = entry_val; ++ } ++ ++ /* Init Tx global parameter pointer */ ++ p_init_enet_param->txglobal = uec->tx_glbl_pram_offset | ++ (u32)uec_info->riscTx; ++ ++ /* Init Tx threads */ ++ for (i = 0; i < thread_tx; i++) { ++ if ((snum = qe_get_snum()) < 0) { ++ printf("%s can not get snum\n", __FUNCTION__); ++ return -ENOMEM; ++ } ++ ++ init_enet_offset = qe_muram_alloc(sizeof(uec_thread_tx_pram_t), ++ UEC_THREAD_TX_PRAM_ALIGNMENT); ++ ++ entry_val = ((u32)snum << ENET_INIT_PARAM_SNUM_SHIFT) | ++ init_enet_offset | (u32)uec_info->riscTx; ++ p_init_enet_param->txthread[i] = entry_val; ++ } ++ ++ __asm__ __volatile__("sync"); ++ ++ /* Issue QE command */ ++ command = QE_INIT_TX_RX; ++ cecr_subblock = ucc_fast_get_qe_cr_subblock( ++ uec->uec_info->uf_info.ucc_num); ++ qe_issue_cmd(command, cecr_subblock, (u8) QE_CR_PROTOCOL_ETHERNET, ++ init_enet_param_offset); ++ ++ return 0; ++} ++ ++static int uec_startup(uec_private_t *uec) ++{ ++ uec_info_t *uec_info; ++ ucc_fast_info_t *uf_info; ++ ucc_fast_private_t *uccf; ++ ucc_fast_t *uf_regs; ++ uec_t *uec_regs; ++ int num_threads_tx; ++ int num_threads_rx; ++ u32 utbipar; ++ enet_interface_e enet_interface; ++ u32 length; ++ u32 align; ++ qe_bd_t *bd; ++ u8 *buf; ++ int i; ++ ++ if (!uec || !uec->uec_info) { ++ printf("%s: uec or uec_info not initial\n", __FUNCTION__); ++ return -EINVAL; ++ } ++ ++ uec_info = uec->uec_info; ++ uf_info = &(uec_info->uf_info); ++ ++ /* Check if Rx BD ring len is illegal */ ++ if ((uec_info->rx_bd_ring_len < UEC_RX_BD_RING_SIZE_MIN) || \ ++ (uec_info->rx_bd_ring_len % UEC_RX_BD_RING_SIZE_ALIGNMENT)) { ++ printf("%s: Rx BD ring len must be multiple of 4, and > 8.\n", ++ __FUNCTION__); ++ return -EINVAL; ++ } ++ ++ /* Check if Tx BD ring len is illegal */ ++ if (uec_info->tx_bd_ring_len < UEC_TX_BD_RING_SIZE_MIN) { ++ printf("%s: Tx BD ring length must not be smaller than 2.\n", ++ __FUNCTION__); ++ return -EINVAL; ++ } ++ ++ /* Check if MRBLR is illegal */ ++ if ((MAX_RXBUF_LEN == 0) || (MAX_RXBUF_LEN % UEC_MRBLR_ALIGNMENT)) { ++ printf("%s: max rx buffer length must be mutliple of 128.\n", ++ __FUNCTION__); ++ return -EINVAL; ++ } ++ ++ /* Both Rx and Tx are stopped */ ++ uec->grace_stopped_rx = 1; ++ uec->grace_stopped_tx = 1; ++ ++ /* Init UCC fast */ ++ if (ucc_fast_init(uf_info, &uccf)) { ++ printf("%s: failed to init ucc fast\n", __FUNCTION__); ++ return -ENOMEM; ++ } ++ ++ /* Save uccf */ ++ uec->uccf = uccf; ++ ++ /* Convert the Tx threads number */ ++ if (uec_convert_threads_num(uec_info->num_threads_tx, ++ &num_threads_tx)) { ++ return -EINVAL; ++ } ++ ++ /* Convert the Rx threads number */ ++ if (uec_convert_threads_num(uec_info->num_threads_rx, ++ &num_threads_rx)) { ++ return -EINVAL; ++ } ++ ++ uf_regs = uccf->uf_regs; ++ ++ /* UEC register is following UCC fast registers */ ++ uec_regs = (uec_t *)(&uf_regs->ucc_eth); ++ ++ /* Save the UEC register pointer to UEC private struct */ ++ uec->uec_regs = uec_regs; ++ ++ /* Init UPSMR, enable hardware statistics (UCC) */ ++ out_be32(&uec->uccf->uf_regs->upsmr, UPSMR_INIT_VALUE); ++ ++ /* Init MACCFG1, flow control disable, disable Tx and Rx */ ++ out_be32(&uec_regs->maccfg1, MACCFG1_INIT_VALUE); ++ ++ /* Init MACCFG2, length check, MAC PAD and CRC enable */ ++ out_be32(&uec_regs->maccfg2, MACCFG2_INIT_VALUE); ++ ++ /* Setup MAC interface mode */ ++ uec_set_mac_if_mode(uec, uec_info->enet_interface); ++ ++ /* Setup MII master clock source */ ++ qe_set_mii_clk_src(uec_info->uf_info.ucc_num); ++ ++ /* Setup UTBIPAR */ ++ utbipar = in_be32(&uec_regs->utbipar); ++ utbipar &= ~UTBIPAR_PHY_ADDRESS_MASK; ++ enet_interface = uec->uec_info->enet_interface; ++ if (enet_interface == ENET_1000_TBI || ++ enet_interface == ENET_1000_RTBI) { ++ utbipar |= (uec_info->phy_address + uec_info->uf_info.ucc_num) ++ << UTBIPAR_PHY_ADDRESS_SHIFT; ++ } else { ++ utbipar |= (0x10 + uec_info->uf_info.ucc_num) ++ << UTBIPAR_PHY_ADDRESS_SHIFT; ++ } ++ ++ out_be32(&uec_regs->utbipar, utbipar); ++ ++ /* Allocate Tx BDs */ ++ length = ((uec_info->tx_bd_ring_len * SIZEOFBD) / ++ UEC_TX_BD_RING_SIZE_MEMORY_ALIGNMENT) * ++ UEC_TX_BD_RING_SIZE_MEMORY_ALIGNMENT; ++ if ((uec_info->tx_bd_ring_len * SIZEOFBD) % ++ UEC_TX_BD_RING_SIZE_MEMORY_ALIGNMENT) { ++ length += UEC_TX_BD_RING_SIZE_MEMORY_ALIGNMENT; ++ } ++ ++ align = UEC_TX_BD_RING_ALIGNMENT; ++ uec->tx_bd_ring_offset = (u32)malloc((u32)(length + align)); ++ if (uec->tx_bd_ring_offset != 0) { ++ uec->p_tx_bd_ring = (u8 *)((uec->tx_bd_ring_offset + align) ++ & ~(align - 1)); ++ } ++ ++ /* Zero all of Tx BDs */ ++ memset((void *)(uec->tx_bd_ring_offset), 0, length + align); ++ ++ /* Allocate Rx BDs */ ++ length = uec_info->rx_bd_ring_len * SIZEOFBD; ++ align = UEC_RX_BD_RING_ALIGNMENT; ++ uec->rx_bd_ring_offset = (u32)(malloc((u32)(length + align))); ++ if (uec->rx_bd_ring_offset != 0) { ++ uec->p_rx_bd_ring = (u8 *)((uec->rx_bd_ring_offset + align) ++ & ~(align - 1)); ++ } ++ ++ /* Zero all of Rx BDs */ ++ memset((void *)(uec->rx_bd_ring_offset), 0, length + align); ++ ++ /* Allocate Rx buffer */ ++ length = uec_info->rx_bd_ring_len * MAX_RXBUF_LEN; ++ align = UEC_RX_DATA_BUF_ALIGNMENT; ++ uec->rx_buf_offset = (u32)malloc(length + align); ++ if (uec->rx_buf_offset != 0) { ++ uec->p_rx_buf = (u8 *)((uec->rx_buf_offset + align) ++ & ~(align - 1)); ++ } ++ ++ /* Zero all of the Rx buffer */ ++ memset((void *)(uec->rx_buf_offset), 0, length + align); ++ ++ /* Init TxBD ring */ ++ bd = (qe_bd_t *)uec->p_tx_bd_ring; ++ uec->txBd = bd; ++ ++ for (i = 0; i < uec_info->tx_bd_ring_len; i++) { ++ BD_DATA_CLEAR(bd); ++ BD_STATUS_SET(bd, 0); ++ BD_LENGTH_SET(bd, 0); ++ bd ++; ++ } ++ BD_STATUS_SET((--bd), TxBD_WRAP); ++ ++ /* Init RxBD ring */ ++ bd = (qe_bd_t *)uec->p_rx_bd_ring; ++ uec->rxBd = bd; ++ buf = uec->p_rx_buf; ++ for (i = 0; i < uec_info->rx_bd_ring_len; i++) { ++ BD_DATA_SET(bd, buf); ++ BD_LENGTH_SET(bd, 0); ++ BD_STATUS_SET(bd, RxBD_EMPTY); ++ buf += MAX_RXBUF_LEN; ++ bd ++; ++ } ++ BD_STATUS_SET((--bd), RxBD_WRAP | RxBD_EMPTY); ++ ++ /* Init global Tx parameter RAM */ ++ uec_init_tx_parameter(uec, num_threads_tx); ++ ++ /* Init global Rx parameter RAM */ ++ uec_init_rx_parameter(uec, num_threads_rx); ++ ++ /* Init ethernet Tx and Rx parameter command */ ++ if (uec_issue_init_enet_rxtx_cmd(uec, num_threads_tx, ++ num_threads_rx)) { ++ printf("%s issue init enet cmd failed\n", __FUNCTION__); ++ return -ENOMEM; ++ } ++ ++ return 0; ++} ++ ++static int uec_init(struct eth_device* dev, bd_t *bd) ++{ ++ uec_private_t *uec; ++ int err; ++ ++ uec = (uec_private_t *)dev->priv; ++ ++ if (uec->the_first_run == 0) { ++ /* Set up the MAC address */ ++ if (dev->enetaddr[0] & 0x01) { ++ printf("%s: MacAddress is multcast address\n", ++ __FUNCTION__); ++ return -EINVAL; ++ } ++ uec_set_mac_address(uec, dev->enetaddr); ++ uec->the_first_run = 1; ++ } ++ ++ err = uec_open(uec, COMM_DIR_RX_AND_TX); ++ if (err) { ++ printf("%s: cannot enable UEC device\n", dev->name); ++ return err; ++ } ++ ++ return 0; ++} ++ ++static void uec_halt(struct eth_device* dev) ++{ ++ uec_private_t *uec = (uec_private_t *)dev->priv; ++ uec_stop(uec, COMM_DIR_RX_AND_TX); ++} ++ ++static int uec_send(struct eth_device* dev, volatile void *buf, int len) ++{ ++ uec_private_t *uec; ++ ucc_fast_private_t *uccf; ++ volatile qe_bd_t *bd; ++ volatile u16 status; ++ int i; ++ int result = 0; ++ ++ uec = (uec_private_t *)dev->priv; ++ uccf = uec->uccf; ++ bd = uec->txBd; ++ ++ /* Find an empty TxBD */ ++ for (i = 0; BD_STATUS(bd) & TxBD_READY; i++) { ++ if (i > 0x100000) { ++ printf("%s: tx buffer not ready\n", dev->name); ++ return result; ++ } ++ } ++ ++ /* Init TxBD */ ++ BD_DATA_SET(bd, buf); ++ BD_LENGTH_SET(bd, len); ++ status = BD_STATUS(bd); ++ status &= BD_WRAP; ++ status |= (TxBD_READY | TxBD_LAST); ++ BD_STATUS_SET(bd, status); ++ ++ /* Tell UCC to transmit the buffer */ ++ ucc_fast_transmit_on_demand(uccf); ++ ++ /* Wait for buffer to be transmitted */ ++ status = BD_STATUS(bd); ++ for (i = 0; status & TxBD_READY; i++) { ++ if (i > 0x100000) { ++ printf("%s: tx error\n", dev->name); ++ return result; ++ } ++ status = BD_STATUS(bd); ++ } ++ ++ /* Ok, the buffer be transimitted */ ++ BD_ADVANCE(bd, status, uec->p_tx_bd_ring); ++ uec->txBd = bd; ++ result = 1; ++ ++ return result; ++} ++ ++static int uec_recv(struct eth_device* dev) ++{ ++ uec_private_t *uec = dev->priv; ++ volatile qe_bd_t *bd; ++ volatile u16 status; ++ u16 len; ++ u8 *data; ++ ++ bd = uec->rxBd; ++ status = BD_STATUS(bd); ++ ++ while (!(status & RxBD_EMPTY)) { ++ if (!(status & RxBD_ERROR)) { ++ data = BD_DATA(bd); ++ len = BD_LENGTH(bd); ++ NetReceive(data, len); ++ } else { ++ printf("%s: Rx error\n", dev->name); ++ } ++ status &= BD_CLEAN; ++ BD_LENGTH_SET(bd, 0); ++ BD_STATUS_SET(bd, status | RxBD_EMPTY); ++ BD_ADVANCE(bd, status, uec->p_rx_bd_ring); ++ status = BD_STATUS(bd); ++ } ++ uec->rxBd = bd; ++ ++ return 1; ++} ++ ++int uec_initialize(int index) ++{ ++ struct eth_device *dev; ++ int i; ++ uec_private_t *uec; ++ uec_info_t *uec_info; ++ int err; ++ ++ dev = (struct eth_device *)malloc(sizeof(struct eth_device)); ++ if (!dev) ++ return 0; ++ memset(dev, 0, sizeof(struct eth_device)); ++ ++ /* Allocate the UEC private struct */ ++ uec = (uec_private_t *)malloc(sizeof(uec_private_t)); ++ if (!uec) { ++ return -ENOMEM; ++ } ++ memset(uec, 0, sizeof(uec_private_t)); ++ ++ /* Init UEC private struct, they come from board.h */ ++ if (index == 0) { ++#ifdef CONFIG_UEC_ETH1 ++ uec_info = ð1_uec_info; ++#endif ++ } else if (index == 1) { ++#ifdef CONFIG_UEC_ETH2 ++ uec_info = ð2_uec_info; ++#endif ++ } else { ++ printf("%s: index is illegal.\n", __FUNCTION__); ++ return -EINVAL; ++ } ++ ++ uec->uec_info = uec_info; ++ ++ sprintf(dev->name, "FSL UEC%d", index); ++ dev->iobase = 0; ++ dev->priv = (void *)uec; ++ dev->init = uec_init; ++ dev->halt = uec_halt; ++ dev->send = uec_send; ++ dev->recv = uec_recv; ++ ++ /* Clear the ethnet address */ ++ for (i = 0; i < 6; i++) ++ dev->enetaddr[i] = 0; ++ ++ eth_register(dev); ++ ++ err = uec_startup(uec); ++ if (err) { ++ printf("%s: Cannot configure net device, aborting.",dev->name); ++ return err; ++ } ++ ++ err = init_phy(dev); ++ if (err) { ++ printf("%s: Cannot initialize PHY, aborting.\n", dev->name); ++ return err; ++ } ++ ++ phy_change(dev); ++ ++ return 1; ++} ++#endif /* CONFIG_QE */ +diff -Naupr u-boot-1.1.6/drivers/qe/uec.h u-boot-1.1.6-fsl-1/drivers/qe/uec.h +--- u-boot-1.1.6/drivers/qe/uec.h 1969-12-31 18:00:00.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/drivers/qe/uec.h 2006-11-10 11:24:29.000000000 -0600 +@@ -0,0 +1,716 @@ ++/* ++ * Copyright (C) 2006 Freescale Semiconductor, Inc. ++ * ++ * Dave Liu <daveliu@freescale.com> ++ * based on source code of Shlomi Gridish ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#ifndef __UEC_H__ ++#define __UEC_H__ ++ ++#define MAX_TX_THREADS 8 ++#define MAX_RX_THREADS 8 ++#define MAX_TX_QUEUES 8 ++#define MAX_RX_QUEUES 8 ++#define MAX_PREFETCHED_BDS 4 ++#define MAX_IPH_OFFSET_ENTRY 8 ++#define MAX_ENET_INIT_PARAM_ENTRIES_RX 9 ++#define MAX_ENET_INIT_PARAM_ENTRIES_TX 8 ++ ++/* UEC UPSMR (Protocol Specific Mode Register) ++ */ ++#define UPSMR_ECM 0x04000000 /* Enable CAM Miss */ ++#define UPSMR_HSE 0x02000000 /* Hardware Statistics Enable */ ++#define UPSMR_PRO 0x00400000 /* Promiscuous */ ++#define UPSMR_CAP 0x00200000 /* CAM polarity */ ++#define UPSMR_RSH 0x00100000 /* Receive Short Frames */ ++#define UPSMR_RPM 0x00080000 /* Reduced Pin Mode interfaces */ ++#define UPSMR_R10M 0x00040000 /* RGMII/RMII 10 Mode */ ++#define UPSMR_RLPB 0x00020000 /* RMII Loopback Mode */ ++#define UPSMR_TBIM 0x00010000 /* Ten-bit Interface Mode */ ++#define UPSMR_RMM 0x00001000 /* RMII/RGMII Mode */ ++#define UPSMR_CAM 0x00000400 /* CAM Address Matching */ ++#define UPSMR_BRO 0x00000200 /* Broadcast Address */ ++#define UPSMR_RES1 0x00002000 /* Reserved feild - must be 1 */ ++ ++#define UPSMR_INIT_VALUE (UPSMR_HSE | UPSMR_RES1) ++ ++/* UEC MACCFG1 (MAC Configuration 1 Register) ++ */ ++#define MACCFG1_FLOW_RX 0x00000020 /* Flow Control Rx */ ++#define MACCFG1_FLOW_TX 0x00000010 /* Flow Control Tx */ ++#define MACCFG1_ENABLE_SYNCHED_RX 0x00000008 /* Enable Rx Sync */ ++#define MACCFG1_ENABLE_RX 0x00000004 /* Enable Rx */ ++#define MACCFG1_ENABLE_SYNCHED_TX 0x00000002 /* Enable Tx Sync */ ++#define MACCFG1_ENABLE_TX 0x00000001 /* Enable Tx */ ++ ++#define MACCFG1_INIT_VALUE (0) ++ ++/* UEC MACCFG2 (MAC Configuration 2 Register) ++ */ ++#define MACCFG2_PREL 0x00007000 ++#define MACCFG2_PREL_SHIFT (31 - 19) ++#define MACCFG2_PREL_MASK 0x0000f000 ++#define MACCFG2_SRP 0x00000080 ++#define MACCFG2_STP 0x00000040 ++#define MACCFG2_RESERVED_1 0x00000020 /* must be set */ ++#define MACCFG2_LC 0x00000010 /* Length Check */ ++#define MACCFG2_MPE 0x00000008 ++#define MACCFG2_FDX 0x00000001 /* Full Duplex */ ++#define MACCFG2_FDX_MASK 0x00000001 ++#define MACCFG2_PAD_CRC 0x00000004 ++#define MACCFG2_CRC_EN 0x00000002 ++#define MACCFG2_PAD_AND_CRC_MODE_NONE 0x00000000 ++#define MACCFG2_PAD_AND_CRC_MODE_CRC_ONLY 0x00000002 ++#define MACCFG2_PAD_AND_CRC_MODE_PAD_AND_CRC 0x00000004 ++#define MACCFG2_INTERFACE_MODE_NIBBLE 0x00000100 ++#define MACCFG2_INTERFACE_MODE_BYTE 0x00000200 ++#define MACCFG2_INTERFACE_MODE_MASK 0x00000300 ++ ++#define MACCFG2_INIT_VALUE (MACCFG2_PREL | MACCFG2_RESERVED_1 | \ ++ MACCFG2_LC | MACCFG2_PAD_CRC | MACCFG2_FDX) ++ ++/* UEC Event Register ++*/ ++#define UCCE_MPD 0x80000000 ++#define UCCE_SCAR 0x40000000 ++#define UCCE_GRA 0x20000000 ++#define UCCE_CBPR 0x10000000 ++#define UCCE_BSY 0x08000000 ++#define UCCE_RXC 0x04000000 ++#define UCCE_TXC 0x02000000 ++#define UCCE_TXE 0x01000000 ++#define UCCE_TXB7 0x00800000 ++#define UCCE_TXB6 0x00400000 ++#define UCCE_TXB5 0x00200000 ++#define UCCE_TXB4 0x00100000 ++#define UCCE_TXB3 0x00080000 ++#define UCCE_TXB2 0x00040000 ++#define UCCE_TXB1 0x00020000 ++#define UCCE_TXB0 0x00010000 ++#define UCCE_RXB7 0x00008000 ++#define UCCE_RXB6 0x00004000 ++#define UCCE_RXB5 0x00002000 ++#define UCCE_RXB4 0x00001000 ++#define UCCE_RXB3 0x00000800 ++#define UCCE_RXB2 0x00000400 ++#define UCCE_RXB1 0x00000200 ++#define UCCE_RXB0 0x00000100 ++#define UCCE_RXF7 0x00000080 ++#define UCCE_RXF6 0x00000040 ++#define UCCE_RXF5 0x00000020 ++#define UCCE_RXF4 0x00000010 ++#define UCCE_RXF3 0x00000008 ++#define UCCE_RXF2 0x00000004 ++#define UCCE_RXF1 0x00000002 ++#define UCCE_RXF0 0x00000001 ++ ++#define UCCE_TXB (UCCE_TXB7 | UCCE_TXB6 | UCCE_TXB5 | UCCE_TXB4 | \ ++ UCCE_TXB3 | UCCE_TXB2 | UCCE_TXB1 | UCCE_TXB0) ++#define UCCE_RXB (UCCE_RXB7 | UCCE_RXB6 | UCCE_RXB5 | UCCE_RXB4 | \ ++ UCCE_RXB3 | UCCE_RXB2 | UCCE_RXB1 | UCCE_RXB0) ++#define UCCE_RXF (UCCE_RXF7 | UCCE_RXF6 | UCCE_RXF5 | UCCE_RXF4 | \ ++ UCCE_RXF3 | UCCE_RXF2 | UCCE_RXF1 | UCCE_RXF0) ++#define UCCE_OTHER (UCCE_SCAR | UCCE_GRA | UCCE_CBPR | UCCE_BSY | \ ++ UCCE_RXC | UCCE_TXC | UCCE_TXE) ++ ++/* UEC TEMODR Register ++*/ ++#define TEMODER_SCHEDULER_ENABLE 0x2000 ++#define TEMODER_IP_CHECKSUM_GENERATE 0x0400 ++#define TEMODER_PERFORMANCE_OPTIMIZATION_MODE1 0x0200 ++#define TEMODER_RMON_STATISTICS 0x0100 ++#define TEMODER_NUM_OF_QUEUES_SHIFT (15-15) ++ ++#define TEMODER_INIT_VALUE 0xc000 ++ ++/* UEC REMODR Register ++*/ ++#define REMODER_RX_RMON_STATISTICS_ENABLE 0x00001000 ++#define REMODER_RX_EXTENDED_FEATURES 0x80000000 ++#define REMODER_VLAN_OPERATION_TAGGED_SHIFT (31-9 ) ++#define REMODER_VLAN_OPERATION_NON_TAGGED_SHIFT (31-10) ++#define REMODER_RX_QOS_MODE_SHIFT (31-15) ++#define REMODER_RMON_STATISTICS 0x00001000 ++#define REMODER_RX_EXTENDED_FILTERING 0x00000800 ++#define REMODER_NUM_OF_QUEUES_SHIFT (31-23) ++#define REMODER_DYNAMIC_MAX_FRAME_LENGTH 0x00000008 ++#define REMODER_DYNAMIC_MIN_FRAME_LENGTH 0x00000004 ++#define REMODER_IP_CHECKSUM_CHECK 0x00000002 ++#define REMODER_IP_ADDRESS_ALIGNMENT 0x00000001 ++ ++#define REMODER_INIT_VALUE 0 ++ ++/* BMRx - Bus Mode Register */ ++#define BMR_GLB 0x20 ++#define BMR_BO_BE 0x10 ++#define BMR_DTB_SECONDARY_BUS 0x02 ++#define BMR_BDB_SECONDARY_BUS 0x01 ++ ++#define BMR_SHIFT 24 ++#define BMR_INIT_VALUE (BMR_GLB | BMR_BO_BE) ++ ++/* UEC UCCS (Ethernet Status Register) ++ */ ++#define UCCS_BPR 0x02 ++#define UCCS_PAU 0x02 ++#define UCCS_MPD 0x01 ++ ++/* UEC MIIMCFG (MII Management Configuration Register) ++ */ ++#define MIIMCFG_RESET_MANAGEMENT 0x80000000 ++#define MIIMCFG_NO_PREAMBLE 0x00000010 ++#define MIIMCFG_CLOCK_DIVIDE_SHIFT (31 - 31) ++#define MIIMCFG_CLOCK_DIVIDE_MASK 0x0000000f ++#define MIIMCFG_MANAGEMENT_CLOCK_DIVIDE_BY_4 0x00000001 ++#define MIIMCFG_MANAGEMENT_CLOCK_DIVIDE_BY_6 0x00000002 ++#define MIIMCFG_MANAGEMENT_CLOCK_DIVIDE_BY_8 0x00000003 ++#define MIIMCFG_MANAGEMENT_CLOCK_DIVIDE_BY_10 0x00000004 ++#define MIIMCFG_MANAGEMENT_CLOCK_DIVIDE_BY_14 0x00000005 ++#define MIIMCFG_MANAGEMENT_CLOCK_DIVIDE_BY_20 0x00000006 ++#define MIIMCFG_MANAGEMENT_CLOCK_DIVIDE_BY_28 0x00000007 ++ ++#define MIIMCFG_MNGMNT_CLC_DIV_INIT_VALUE \ ++ MIIMCFG_MANAGEMENT_CLOCK_DIVIDE_BY_10 ++ ++/* UEC MIIMCOM (MII Management Command Register) ++ */ ++#define MIIMCOM_SCAN_CYCLE 0x00000002 /* Scan cycle */ ++#define MIIMCOM_READ_CYCLE 0x00000001 /* Read cycle */ ++ ++/* UEC MIIMADD (MII Management Address Register) ++ */ ++#define MIIMADD_PHY_ADDRESS_SHIFT (31 - 23) ++#define MIIMADD_PHY_REGISTER_SHIFT (31 - 31) ++ ++/* UEC MIIMCON (MII Management Control Register) ++ */ ++#define MIIMCON_PHY_CONTROL_SHIFT (31 - 31) ++#define MIIMCON_PHY_STATUS_SHIFT (31 - 31) ++ ++/* UEC MIIMIND (MII Management Indicator Register) ++ */ ++#define MIIMIND_NOT_VALID 0x00000004 ++#define MIIMIND_SCAN 0x00000002 ++#define MIIMIND_BUSY 0x00000001 ++ ++/* UEC UTBIPAR (Ten Bit Interface Physical Address Register) ++ */ ++#define UTBIPAR_PHY_ADDRESS_SHIFT (31 - 31) ++#define UTBIPAR_PHY_ADDRESS_MASK 0x0000001f ++ ++/* UEC UESCR (Ethernet Statistics Control Register) ++ */ ++#define UESCR_AUTOZ 0x8000 ++#define UESCR_CLRCNT 0x4000 ++#define UESCR_MAXCOV_SHIFT (15 - 7) ++#define UESCR_SCOV_SHIFT (15 - 15) ++ ++/****** Tx data struct collection ******/ ++/* Tx thread data, each Tx thread has one this struct. ++*/ ++typedef struct uec_thread_data_tx { ++ u8 res0[136]; ++} __attribute__ ((packed)) uec_thread_data_tx_t; ++ ++/* Tx thread parameter, each Tx thread has one this struct. ++*/ ++typedef struct uec_thread_tx_pram { ++ u8 res0[64]; ++} __attribute__ ((packed)) uec_thread_tx_pram_t; ++ ++/* Send queue queue-descriptor, each Tx queue has one this QD ++*/ ++typedef struct uec_send_queue_qd { ++ u32 bd_ring_base; /* pointer to BD ring base address */ ++ u8 res0[0x8]; ++ u32 last_bd_completed_address; /* last entry in BD ring */ ++ u8 res1[0x30]; ++} __attribute__ ((packed)) uec_send_queue_qd_t; ++ ++/* Send queue memory region */ ++typedef struct uec_send_queue_mem_region { ++ uec_send_queue_qd_t sqqd[MAX_TX_QUEUES]; ++} __attribute__ ((packed)) uec_send_queue_mem_region_t; ++ ++/* Scheduler struct ++*/ ++typedef struct uec_scheduler { ++ u16 cpucount0; /* CPU packet counter */ ++ u16 cpucount1; /* CPU packet counter */ ++ u16 cecount0; /* QE packet counter */ ++ u16 cecount1; /* QE packet counter */ ++ u16 cpucount2; /* CPU packet counter */ ++ u16 cpucount3; /* CPU packet counter */ ++ u16 cecount2; /* QE packet counter */ ++ u16 cecount3; /* QE packet counter */ ++ u16 cpucount4; /* CPU packet counter */ ++ u16 cpucount5; /* CPU packet counter */ ++ u16 cecount4; /* QE packet counter */ ++ u16 cecount5; /* QE packet counter */ ++ u16 cpucount6; /* CPU packet counter */ ++ u16 cpucount7; /* CPU packet counter */ ++ u16 cecount6; /* QE packet counter */ ++ u16 cecount7; /* QE packet counter */ ++ u32 weightstatus[MAX_TX_QUEUES]; /* accumulated weight factor */ ++ u32 rtsrshadow; /* temporary variable handled by QE */ ++ u32 time; /* temporary variable handled by QE */ ++ u32 ttl; /* temporary variable handled by QE */ ++ u32 mblinterval; /* max burst length interval */ ++ u16 nortsrbytetime; /* normalized value of byte time in tsr units */ ++ u8 fracsiz; ++ u8 res0[1]; ++ u8 strictpriorityq; /* Strict Priority Mask register */ ++ u8 txasap; /* Transmit ASAP register */ ++ u8 extrabw; /* Extra BandWidth register */ ++ u8 oldwfqmask; /* temporary variable handled by QE */ ++ u8 weightfactor[MAX_TX_QUEUES]; /**< weight factor for queues */ ++ u32 minw; /* temporary variable handled by QE */ ++ u8 res1[0x70-0x64]; ++} __attribute__ ((packed)) uec_scheduler_t; ++ ++/* Tx firmware counters ++*/ ++typedef struct uec_tx_firmware_statistics_pram { ++ u32 sicoltx; /* single collision */ ++ u32 mulcoltx; /* multiple collision */ ++ u32 latecoltxfr; /* late collision */ ++ u32 frabortduecol; /* frames aborted due to tx collision */ ++ u32 frlostinmactxer; /* frames lost due to internal MAC error tx */ ++ u32 carriersenseertx; /* carrier sense error */ ++ u32 frtxok; /* frames transmitted OK */ ++ u32 txfrexcessivedefer; ++ u32 txpkts256; /* total packets(including bad) 256~511 B */ ++ u32 txpkts512; /* total packets(including bad) 512~1023B */ ++ u32 txpkts1024; /* total packets(including bad) 1024~1518B */ ++ u32 txpktsjumbo; /* total packets(including bad) >1024 */ ++} __attribute__ ((packed)) uec_tx_firmware_statistics_pram_t; ++ ++/* Tx global parameter table ++*/ ++typedef struct uec_tx_global_pram { ++ u16 temoder; ++ u8 res0[0x38-0x02]; ++ u32 sqptr; ++ u32 schedulerbasepointer; ++ u32 txrmonbaseptr; ++ u32 tstate; ++ u8 iphoffset[MAX_IPH_OFFSET_ENTRY]; ++ u32 vtagtable[0x8]; ++ u32 tqptr; ++ u8 res2[0x80-0x74]; ++} __attribute__ ((packed)) uec_tx_global_pram_t; ++ ++ ++/****** Rx data struct collection ******/ ++/* Rx thread data, each Rx thread has one this struct. ++*/ ++typedef struct uec_thread_data_rx { ++ u8 res0[40]; ++} __attribute__ ((packed)) uec_thread_data_rx_t; ++ ++/* Rx thread parameter, each Rx thread has one this struct. ++*/ ++typedef struct uec_thread_rx_pram { ++ u8 res0[128]; ++} __attribute__ ((packed)) uec_thread_rx_pram_t; ++ ++/* Rx firmware counters ++*/ ++typedef struct uec_rx_firmware_statistics_pram { ++ u32 frrxfcser; /* frames with crc error */ ++ u32 fraligner; /* frames with alignment error */ ++ u32 inrangelenrxer; /* in range length error */ ++ u32 outrangelenrxer; /* out of range length error */ ++ u32 frtoolong; /* frame too long */ ++ u32 runt; /* runt */ ++ u32 verylongevent; /* very long event */ ++ u32 symbolerror; /* symbol error */ ++ u32 dropbsy; /* drop because of BD not ready */ ++ u8 res0[0x8]; ++ u32 mismatchdrop; /* drop because of MAC filtering */ ++ u32 underpkts; /* total frames less than 64 octets */ ++ u32 pkts256; /* total frames(including bad)256~511 B */ ++ u32 pkts512; /* total frames(including bad)512~1023 B */ ++ u32 pkts1024; /* total frames(including bad)1024~1518 B */ ++ u32 pktsjumbo; /* total frames(including bad) >1024 B */ ++ u32 frlossinmacer; ++ u32 pausefr; /* pause frames */ ++ u8 res1[0x4]; ++ u32 removevlan; ++ u32 replacevlan; ++ u32 insertvlan; ++} __attribute__ ((packed)) uec_rx_firmware_statistics_pram_t; ++ ++/* Rx interrupt coalescing entry, each Rx queue has one this entry. ++*/ ++typedef struct uec_rx_interrupt_coalescing_entry { ++ u32 maxvalue; ++ u32 counter; ++} __attribute__ ((packed)) uec_rx_interrupt_coalescing_entry_t; ++ ++typedef struct uec_rx_interrupt_coalescing_table { ++ uec_rx_interrupt_coalescing_entry_t entry[MAX_RX_QUEUES]; ++} __attribute__ ((packed)) uec_rx_interrupt_coalescing_table_t; ++ ++/* RxBD queue entry, each Rx queue has one this entry. ++*/ ++typedef struct uec_rx_bd_queues_entry { ++ u32 bdbaseptr; /* BD base pointer */ ++ u32 bdptr; /* BD pointer */ ++ u32 externalbdbaseptr; /* external BD base pointer */ ++ u32 externalbdptr; /* external BD pointer */ ++} __attribute__ ((packed)) uec_rx_bd_queues_entry_t; ++ ++/* Rx global paramter table ++*/ ++typedef struct uec_rx_global_pram { ++ u32 remoder; /* ethernet mode reg. */ ++ u32 rqptr; /* base pointer to the Rx Queues */ ++ u32 res0[0x1]; ++ u8 res1[0x20-0xC]; ++ u16 typeorlen; ++ u8 res2[0x1]; ++ u8 rxgstpack; /* ack on GRACEFUL STOP RX command */ ++ u32 rxrmonbaseptr; /* Rx RMON statistics base */ ++ u8 res3[0x30-0x28]; ++ u32 intcoalescingptr; /* Interrupt coalescing table pointer */ ++ u8 res4[0x36-0x34]; ++ u8 rstate; ++ u8 res5[0x46-0x37]; ++ u16 mrblr; /* max receive buffer length reg. */ ++ u32 rbdqptr; /* RxBD parameter table description */ ++ u16 mflr; /* max frame length reg. */ ++ u16 minflr; /* min frame length reg. */ ++ u16 maxd1; /* max dma1 length reg. */ ++ u16 maxd2; /* max dma2 length reg. */ ++ u32 ecamptr; /* external CAM address */ ++ u32 l2qt; /* VLAN priority mapping table. */ ++ u32 l3qt[0x8]; /* IP priority mapping table. */ ++ u16 vlantype; /* vlan type */ ++ u16 vlantci; /* default vlan tci */ ++ u8 addressfiltering[64];/* address filtering data structure */ ++ u32 exfGlobalParam; /* extended filtering global parameters */ ++ u8 res6[0x100-0xC4]; /* Initialize to zero */ ++} __attribute__ ((packed)) uec_rx_global_pram_t; ++ ++#define GRACEFUL_STOP_ACKNOWLEDGE_RX 0x01 ++ ++ ++/****** UEC common ******/ ++/* UCC statistics - hardware counters ++*/ ++typedef struct uec_hardware_statistics { ++ u32 tx64; ++ u32 tx127; ++ u32 tx255; ++ u32 rx64; ++ u32 rx127; ++ u32 rx255; ++ u32 txok; ++ u16 txcf; ++ u32 tmca; ++ u32 tbca; ++ u32 rxfok; ++ u32 rxbok; ++ u32 rbyt; ++ u32 rmca; ++ u32 rbca; ++} __attribute__ ((packed)) uec_hardware_statistics_t; ++ ++/* InitEnet command parameter ++*/ ++typedef struct uec_init_cmd_pram { ++ u8 resinit0; ++ u8 resinit1; ++ u8 resinit2; ++ u8 resinit3; ++ u16 resinit4; ++ u8 res1[0x1]; ++ u8 largestexternallookupkeysize; ++ u32 rgftgfrxglobal; ++ u32 rxthread[MAX_ENET_INIT_PARAM_ENTRIES_RX]; /* rx threads */ ++ u8 res2[0x38 - 0x30]; ++ u32 txglobal; /* tx global */ ++ u32 txthread[MAX_ENET_INIT_PARAM_ENTRIES_TX]; /* tx threads */ ++ u8 res3[0x1]; ++} __attribute__ ((packed)) uec_init_cmd_pram_t; ++ ++#define ENET_INIT_PARAM_RGF_SHIFT (32 - 4) ++#define ENET_INIT_PARAM_TGF_SHIFT (32 - 8) ++ ++#define ENET_INIT_PARAM_RISC_MASK 0x0000003f ++#define ENET_INIT_PARAM_PTR_MASK 0x00ffffc0 ++#define ENET_INIT_PARAM_SNUM_MASK 0xff000000 ++#define ENET_INIT_PARAM_SNUM_SHIFT 24 ++ ++#define ENET_INIT_PARAM_MAGIC_RES_INIT0 0x06 ++#define ENET_INIT_PARAM_MAGIC_RES_INIT1 0x30 ++#define ENET_INIT_PARAM_MAGIC_RES_INIT2 0xff ++#define ENET_INIT_PARAM_MAGIC_RES_INIT3 0x00 ++#define ENET_INIT_PARAM_MAGIC_RES_INIT4 0x0400 ++ ++/* structure representing 82xx Address Filtering Enet Address in PRAM ++*/ ++typedef struct uec_82xx_enet_address { ++ u8 res1[0x2]; ++ u16 h; /* address (MSB) */ ++ u16 m; /* address */ ++ u16 l; /* address (LSB) */ ++} __attribute__ ((packed)) uec_82xx_enet_address_t; ++ ++/* structure representing 82xx Address Filtering PRAM ++*/ ++typedef struct uec_82xx_address_filtering_pram { ++ u32 iaddr_h; /* individual address filter, high */ ++ u32 iaddr_l; /* individual address filter, low */ ++ u32 gaddr_h; /* group address filter, high */ ++ u32 gaddr_l; /* group address filter, low */ ++ uec_82xx_enet_address_t taddr; ++ uec_82xx_enet_address_t paddr[4]; ++ u8 res0[0x40-0x38]; ++} __attribute__ ((packed)) uec_82xx_address_filtering_pram_t; ++ ++/* Buffer Descriptor ++*/ ++typedef struct buffer_descriptor { ++ u16 status; ++ u16 len; ++ u32 data; ++} __attribute__ ((packed)) qe_bd_t, *p_bd_t; ++ ++#define SIZEOFBD sizeof(qe_bd_t) ++ ++/* Common BD flags ++*/ ++#define BD_WRAP 0x2000 ++#define BD_INT 0x1000 ++#define BD_LAST 0x0800 ++#define BD_CLEAN 0x3000 ++ ++/* TxBD status flags ++*/ ++#define TxBD_READY 0x8000 ++#define TxBD_PADCRC 0x4000 ++#define TxBD_WRAP BD_WRAP ++#define TxBD_INT BD_INT ++#define TxBD_LAST BD_LAST ++#define TxBD_TXCRC 0x0400 ++#define TxBD_DEF 0x0200 ++#define TxBD_PP 0x0100 ++#define TxBD_LC 0x0080 ++#define TxBD_RL 0x0040 ++#define TxBD_RC 0x003C ++#define TxBD_UNDERRUN 0x0002 ++#define TxBD_TRUNC 0x0001 ++ ++#define TxBD_ERROR (TxBD_UNDERRUN | TxBD_TRUNC) ++ ++/* RxBD status flags ++*/ ++#define RxBD_EMPTY 0x8000 ++#define RxBD_OWNER 0x4000 ++#define RxBD_WRAP BD_WRAP ++#define RxBD_INT BD_INT ++#define RxBD_LAST BD_LAST ++#define RxBD_FIRST 0x0400 ++#define RxBD_CMR 0x0200 ++#define RxBD_MISS 0x0100 ++#define RxBD_BCAST 0x0080 ++#define RxBD_MCAST 0x0040 ++#define RxBD_LG 0x0020 ++#define RxBD_NO 0x0010 ++#define RxBD_SHORT 0x0008 ++#define RxBD_CRCERR 0x0004 ++#define RxBD_OVERRUN 0x0002 ++#define RxBD_IPCH 0x0001 ++ ++#define RxBD_ERROR (RxBD_LG | RxBD_NO | RxBD_SHORT | \ ++ RxBD_CRCERR | RxBD_OVERRUN) ++ ++/* BD access macros ++*/ ++#define BD_STATUS(_bd) (((p_bd_t)(_bd))->status) ++#define BD_STATUS_SET(_bd, _val) (((p_bd_t)(_bd))->status = _val) ++#define BD_LENGTH(_bd) (((p_bd_t)(_bd))->len) ++#define BD_LENGTH_SET(_bd, _val) (((p_bd_t)(_bd))->len = _val) ++#define BD_DATA_CLEAR(_bd) (((p_bd_t)(_bd))->data = 0) ++#define BD_IS_DATA(_bd) (((p_bd_t)(_bd))->data) ++#define BD_DATA(_bd) ((u8 *)(((p_bd_t)(_bd))->data)) ++#define BD_DATA_SET(_bd, _data) (((p_bd_t)(_bd))->data = (u32)(_data)) ++#define BD_ADVANCE(_bd,_status,_base) \ ++ (((_status) & BD_WRAP) ? (_bd) = ((p_bd_t)(_base)) : ++(_bd)) ++ ++/* Rx Prefetched BDs ++*/ ++typedef struct uec_rx_prefetched_bds { ++ qe_bd_t bd[MAX_PREFETCHED_BDS]; /* prefetched bd */ ++} __attribute__ ((packed)) uec_rx_prefetched_bds_t; ++ ++/* Alignments ++ */ ++#define UEC_RX_GLOBAL_PRAM_ALIGNMENT 64 ++#define UEC_TX_GLOBAL_PRAM_ALIGNMENT 64 ++#define UEC_THREAD_RX_PRAM_ALIGNMENT 128 ++#define UEC_THREAD_TX_PRAM_ALIGNMENT 64 ++#define UEC_THREAD_DATA_ALIGNMENT 256 ++#define UEC_SEND_QUEUE_QUEUE_DESCRIPTOR_ALIGNMENT 32 ++#define UEC_SCHEDULER_ALIGNMENT 4 ++#define UEC_TX_STATISTICS_ALIGNMENT 4 ++#define UEC_RX_STATISTICS_ALIGNMENT 4 ++#define UEC_RX_INTERRUPT_COALESCING_ALIGNMENT 4 ++#define UEC_RX_BD_QUEUES_ALIGNMENT 8 ++#define UEC_RX_PREFETCHED_BDS_ALIGNMENT 128 ++#define UEC_RX_EXTENDED_FILTERING_GLOBAL_PARAMETERS_ALIGNMENT 4 ++#define UEC_RX_BD_RING_ALIGNMENT 32 ++#define UEC_TX_BD_RING_ALIGNMENT 32 ++#define UEC_MRBLR_ALIGNMENT 128 ++#define UEC_RX_BD_RING_SIZE_ALIGNMENT 4 ++#define UEC_TX_BD_RING_SIZE_MEMORY_ALIGNMENT 32 ++#define UEC_RX_DATA_BUF_ALIGNMENT 64 ++ ++#define UEC_VLAN_PRIORITY_MAX 8 ++#define UEC_IP_PRIORITY_MAX 64 ++#define UEC_TX_VTAG_TABLE_ENTRY_MAX 8 ++#define UEC_RX_BD_RING_SIZE_MIN 8 ++#define UEC_TX_BD_RING_SIZE_MIN 2 ++ ++/* Ethernet speed ++*/ ++typedef enum enet_speed { ++ ENET_SPEED_10BT, /* 10 Base T */ ++ ENET_SPEED_100BT, /* 100 Base T */ ++ ENET_SPEED_1000BT /* 1000 Base T */ ++} enet_speed_e; ++ ++/* Ethernet Address Type. ++*/ ++typedef enum enet_addr_type { ++ ENET_ADDR_TYPE_INDIVIDUAL, ++ ENET_ADDR_TYPE_GROUP, ++ ENET_ADDR_TYPE_BROADCAST ++} enet_addr_type_e; ++ ++/* TBI / MII Set Register ++*/ ++typedef enum enet_tbi_mii_reg { ++ ENET_TBI_MII_CR = 0x00, ++ ENET_TBI_MII_SR = 0x01, ++ ENET_TBI_MII_ANA = 0x04, ++ ENET_TBI_MII_ANLPBPA = 0x05, ++ ENET_TBI_MII_ANEX = 0x06, ++ ENET_TBI_MII_ANNPT = 0x07, ++ ENET_TBI_MII_ANLPANP = 0x08, ++ ENET_TBI_MII_EXST = 0x0F, ++ ENET_TBI_MII_JD = 0x10, ++ ENET_TBI_MII_TBICON = 0x11 ++} enet_tbi_mii_reg_e; ++ ++/* UEC number of threads ++*/ ++typedef enum uec_num_of_threads { ++ UEC_NUM_OF_THREADS_1 = 0x1, /* 1 */ ++ UEC_NUM_OF_THREADS_2 = 0x2, /* 2 */ ++ UEC_NUM_OF_THREADS_4 = 0x0, /* 4 */ ++ UEC_NUM_OF_THREADS_6 = 0x3, /* 6 */ ++ UEC_NUM_OF_THREADS_8 = 0x4 /* 8 */ ++} uec_num_of_threads_e; ++ ++/* UEC ethernet interface type ++*/ ++typedef enum enet_interface { ++ ENET_10_MII, ++ ENET_10_RMII, ++ ENET_10_RGMII, ++ ENET_100_MII, ++ ENET_100_RMII, ++ ENET_100_RGMII, ++ ENET_1000_GMII, ++ ENET_1000_RGMII, ++ ENET_1000_TBI, ++ ENET_1000_RTBI ++} enet_interface_e; ++ ++/* UEC initialization info struct ++*/ ++typedef struct uec_info { ++ ucc_fast_info_t uf_info; ++ uec_num_of_threads_e num_threads_tx; ++ uec_num_of_threads_e num_threads_rx; ++ qe_risc_allocation_e riscTx; ++ qe_risc_allocation_e riscRx; ++ u16 rx_bd_ring_len; ++ u16 tx_bd_ring_len; ++ u8 phy_address; ++ enet_interface_e enet_interface; ++} uec_info_t; ++ ++/* UEC driver initialized info ++*/ ++#define MAX_RXBUF_LEN 1536 ++#define MAX_FRAME_LEN 1518 ++#define MIN_FRAME_LEN 64 ++#define MAX_DMA1_LEN 1520 ++#define MAX_DMA2_LEN 1520 ++ ++/* UEC driver private struct ++*/ ++typedef struct uec_private { ++ uec_info_t *uec_info; ++ ucc_fast_private_t *uccf; ++ struct eth_device *dev; ++ uec_t *uec_regs; ++ /* enet init command parameter */ ++ uec_init_cmd_pram_t *p_init_enet_param; ++ u32 init_enet_param_offset; ++ /* Rx and Tx paramter */ ++ uec_rx_global_pram_t *p_rx_glbl_pram; ++ u32 rx_glbl_pram_offset; ++ uec_tx_global_pram_t *p_tx_glbl_pram; ++ u32 tx_glbl_pram_offset; ++ uec_send_queue_mem_region_t *p_send_q_mem_reg; ++ u32 send_q_mem_reg_offset; ++ uec_thread_data_tx_t *p_thread_data_tx; ++ u32 thread_dat_tx_offset; ++ uec_thread_data_rx_t *p_thread_data_rx; ++ u32 thread_dat_rx_offset; ++ uec_rx_bd_queues_entry_t *p_rx_bd_qs_tbl; ++ u32 rx_bd_qs_tbl_offset; ++ /* BDs specific */ ++ u8 *p_tx_bd_ring; ++ u32 tx_bd_ring_offset; ++ u8 *p_rx_bd_ring; ++ u32 rx_bd_ring_offset; ++ u8 *p_rx_buf; ++ u32 rx_buf_offset; ++ volatile qe_bd_t *txBd; ++ volatile qe_bd_t *rxBd; ++ /* Status */ ++ int mac_tx_enabled; ++ int mac_rx_enabled; ++ int grace_stopped_tx; ++ int grace_stopped_rx; ++ int the_first_run; ++ /* PHY specific */ ++ struct uec_mii_info *mii_info; ++ int oldspeed; ++ int oldduplex; ++ int oldlink; ++} uec_private_t; ++ ++#endif /* __UEC_H__ */ +diff -Naupr u-boot-1.1.6/drivers/qe/uec_phy.c u-boot-1.1.6-fsl-1/drivers/qe/uec_phy.c +--- u-boot-1.1.6/drivers/qe/uec_phy.c 1969-12-31 18:00:00.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/drivers/qe/uec_phy.c 2006-12-06 10:33:49.000000000 -0600 +@@ -0,0 +1,607 @@ ++/* ++ * Copyright (C) 2005 Freescale Semiconductor, Inc. ++ * ++ * Author: Shlomi Gridish ++ * ++ * Description: UCC GETH Driver -- PHY handling ++ * Driver for UEC on QE ++ * Based on 8260_io/fcc_enet.c ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License as published by the ++ * Free Software Foundation; either version 2 of the License, or (at your ++ * option) any later version. ++ * ++ */ ++ ++#include "common.h" ++#include "net.h" ++#include "malloc.h" ++#include "asm/errno.h" ++#include "asm/immap_qe.h" ++#include "asm/io.h" ++#include "qe.h" ++#include "uccf.h" ++#include "uec.h" ++#include "uec_phy.h" ++#include "miiphy.h" ++ ++#if defined(CONFIG_QE) ++ ++#define UEC_VERBOSE_DEBUG ++#define ugphy_printk(format, arg...) \ ++ printf(format "\n", ## arg) ++ ++#define ugphy_dbg(format, arg...) \ ++ ugphy_printk(format , ## arg) ++#define ugphy_err(format, arg...) \ ++ ugphy_printk(format , ## arg) ++#define ugphy_info(format, arg...) \ ++ ugphy_printk(format , ## arg) ++#define ugphy_warn(format, arg...) \ ++ ugphy_printk(format , ## arg) ++ ++#ifdef UEC_VERBOSE_DEBUG ++#define ugphy_vdbg ugphy_dbg ++#else ++#define ugphy_vdbg(ugeth, fmt, args...) do { } while (0) ++#endif /* UEC_VERBOSE_DEBUG */ ++ ++static void config_genmii_advert (struct uec_mii_info *mii_info); ++static void genmii_setup_forced (struct uec_mii_info *mii_info); ++static void genmii_restart_aneg (struct uec_mii_info *mii_info); ++static int gbit_config_aneg (struct uec_mii_info *mii_info); ++static int genmii_config_aneg (struct uec_mii_info *mii_info); ++static int genmii_update_link (struct uec_mii_info *mii_info); ++static int genmii_read_status (struct uec_mii_info *mii_info); ++u16 phy_read (struct uec_mii_info *mii_info, u16 regnum); ++void phy_write (struct uec_mii_info *mii_info, u16 regnum, u16 val); ++ ++/* Write value to the PHY for this device to the register at regnum, */ ++/* waiting until the write is done before it returns. All PHY */ ++/* configuration has to be done through the TSEC1 MIIM regs */ ++void write_phy_reg (struct eth_device *dev, int mii_id, int regnum, int value) ++{ ++ uec_private_t *ugeth = (uec_private_t *) dev->priv; ++ uec_t *ug_regs; ++ enet_tbi_mii_reg_e mii_reg = (enet_tbi_mii_reg_e) regnum; ++ u32 tmp_reg; ++ ++ ug_regs = ugeth->uec_regs; ++ ++ /* Stop the MII management read cycle */ ++ out_be32 (&ug_regs->miimcom, 0); ++ /* Setting up the MII Mangement Address Register */ ++ tmp_reg = ((u32) mii_id << MIIMADD_PHY_ADDRESS_SHIFT) | mii_reg; ++ out_be32 (&ug_regs->miimadd, tmp_reg); ++ ++ /* Setting up the MII Mangement Control Register with the value */ ++ out_be32 (&ug_regs->miimcon, (u32) value); ++ ++ /* Wait till MII management write is complete */ ++ while ((in_be32 (&ug_regs->miimind)) & MIIMIND_BUSY); ++ ++ udelay (100000); ++} ++ ++/* Reads from register regnum in the PHY for device dev, */ ++/* returning the value. Clears miimcom first. All PHY */ ++/* configuration has to be done through the TSEC1 MIIM regs */ ++int read_phy_reg (struct eth_device *dev, int mii_id, int regnum) ++{ ++ uec_private_t *ugeth = (uec_private_t *) dev->priv; ++ uec_t *ug_regs; ++ enet_tbi_mii_reg_e mii_reg = (enet_tbi_mii_reg_e) regnum; ++ u32 tmp_reg; ++ u16 value; ++ ++ ug_regs = ugeth->uec_regs; ++ ++ /* Setting up the MII Mangement Address Register */ ++ tmp_reg = ((u32) mii_id << MIIMADD_PHY_ADDRESS_SHIFT) | mii_reg; ++ out_be32 (&ug_regs->miimadd, tmp_reg); ++ ++ /* Perform an MII management read cycle */ ++ out_be32 (&ug_regs->miimcom, 0); ++ out_be32 (&ug_regs->miimcom, MIIMCOM_READ_CYCLE); ++ ++ /* Wait till MII management write is complete */ ++ while ((in_be32 (&ug_regs->miimind)) & ++ (MIIMIND_NOT_VALID | MIIMIND_BUSY)); ++ ++ udelay (100000); ++ ++ /* Read MII management status */ ++ value = (u16) in_be32 (&ug_regs->miimstat); ++ if (value == 0xffff) ++ ugphy_warn ++ ("read wrong value : mii_id %d,mii_reg %d, base %08x", ++ mii_id, mii_reg, (u32) & (ug_regs->miimcfg)); ++ ++ return (value); ++} ++ ++void mii_clear_phy_interrupt (struct uec_mii_info *mii_info) ++{ ++ if (mii_info->phyinfo->ack_interrupt) ++ mii_info->phyinfo->ack_interrupt (mii_info); ++} ++ ++void mii_configure_phy_interrupt (struct uec_mii_info *mii_info, ++ u32 interrupts) ++{ ++ mii_info->interrupts = interrupts; ++ if (mii_info->phyinfo->config_intr) ++ mii_info->phyinfo->config_intr (mii_info); ++} ++ ++/* Writes MII_ADVERTISE with the appropriate values, after ++ * sanitizing advertise to make sure only supported features ++ * are advertised ++ */ ++static void config_genmii_advert (struct uec_mii_info *mii_info) ++{ ++ u32 advertise; ++ u16 adv; ++ ++ /* Only allow advertising what this PHY supports */ ++ mii_info->advertising &= mii_info->phyinfo->features; ++ advertise = mii_info->advertising; ++ ++ /* Setup standard advertisement */ ++ adv = phy_read (mii_info, PHY_ANAR); ++ adv &= ~(ADVERTISE_ALL | ADVERTISE_100BASE4); ++ if (advertise & ADVERTISED_10baseT_Half) ++ adv |= ADVERTISE_10HALF; ++ if (advertise & ADVERTISED_10baseT_Full) ++ adv |= ADVERTISE_10FULL; ++ if (advertise & ADVERTISED_100baseT_Half) ++ adv |= ADVERTISE_100HALF; ++ if (advertise & ADVERTISED_100baseT_Full) ++ adv |= ADVERTISE_100FULL; ++ phy_write (mii_info, PHY_ANAR, adv); ++} ++ ++static void genmii_setup_forced (struct uec_mii_info *mii_info) ++{ ++ u16 ctrl; ++ u32 features = mii_info->phyinfo->features; ++ ++ ctrl = phy_read (mii_info, PHY_BMCR); ++ ++ ctrl &= ~(PHY_BMCR_DPLX | PHY_BMCR_100_MBPS | ++ PHY_BMCR_1000_MBPS | PHY_BMCR_AUTON); ++ ctrl |= PHY_BMCR_RESET; ++ ++ switch (mii_info->speed) { ++ case SPEED_1000: ++ if (features & (SUPPORTED_1000baseT_Half ++ | SUPPORTED_1000baseT_Full)) { ++ ctrl |= PHY_BMCR_1000_MBPS; ++ break; ++ } ++ mii_info->speed = SPEED_100; ++ case SPEED_100: ++ if (features & (SUPPORTED_100baseT_Half ++ | SUPPORTED_100baseT_Full)) { ++ ctrl |= PHY_BMCR_100_MBPS; ++ break; ++ } ++ mii_info->speed = SPEED_10; ++ case SPEED_10: ++ if (features & (SUPPORTED_10baseT_Half ++ | SUPPORTED_10baseT_Full)) ++ break; ++ default: /* Unsupported speed! */ ++ ugphy_err ("%s: Bad speed!", mii_info->dev->name); ++ break; ++ } ++ ++ phy_write (mii_info, PHY_BMCR, ctrl); ++} ++ ++/* Enable and Restart Autonegotiation */ ++static void genmii_restart_aneg (struct uec_mii_info *mii_info) ++{ ++ u16 ctl; ++ ++ ctl = phy_read (mii_info, PHY_BMCR); ++ ctl |= (PHY_BMCR_AUTON | PHY_BMCR_RST_NEG); ++ phy_write (mii_info, PHY_BMCR, ctl); ++} ++ ++static int gbit_config_aneg (struct uec_mii_info *mii_info) ++{ ++ u16 adv; ++ u32 advertise; ++ ++ if (mii_info->autoneg) { ++ /* Configure the ADVERTISE register */ ++ config_genmii_advert (mii_info); ++ advertise = mii_info->advertising; ++ ++ adv = phy_read (mii_info, MII_1000BASETCONTROL); ++ adv &= ~(MII_1000BASETCONTROL_FULLDUPLEXCAP | ++ MII_1000BASETCONTROL_HALFDUPLEXCAP); ++ if (advertise & SUPPORTED_1000baseT_Half) ++ adv |= MII_1000BASETCONTROL_HALFDUPLEXCAP; ++ if (advertise & SUPPORTED_1000baseT_Full) ++ adv |= MII_1000BASETCONTROL_FULLDUPLEXCAP; ++ phy_write (mii_info, MII_1000BASETCONTROL, adv); ++ ++ /* Start/Restart aneg */ ++ genmii_restart_aneg (mii_info); ++ } else ++ genmii_setup_forced (mii_info); ++ ++ return 0; ++} ++ ++static int marvell_config_aneg (struct uec_mii_info *mii_info) ++{ ++ /* The Marvell PHY has an errata which requires ++ * that certain registers get written in order ++ * to restart autonegotiation */ ++ phy_write (mii_info, PHY_BMCR, PHY_BMCR_RESET); ++ ++ phy_write (mii_info, 0x1d, 0x1f); ++ phy_write (mii_info, 0x1e, 0x200c); ++ phy_write (mii_info, 0x1d, 0x5); ++ phy_write (mii_info, 0x1e, 0); ++ phy_write (mii_info, 0x1e, 0x100); ++ ++ gbit_config_aneg (mii_info); ++ ++ return 0; ++} ++ ++static int genmii_config_aneg (struct uec_mii_info *mii_info) ++{ ++ if (mii_info->autoneg) { ++ config_genmii_advert (mii_info); ++ genmii_restart_aneg (mii_info); ++ } else ++ genmii_setup_forced (mii_info); ++ ++ return 0; ++} ++ ++static int genmii_update_link (struct uec_mii_info *mii_info) ++{ ++ u16 status; ++ ++ /* Do a fake read */ ++ phy_read (mii_info, PHY_BMSR); ++ ++ /* Read link and autonegotiation status */ ++ status = phy_read (mii_info, PHY_BMSR); ++ if ((status & PHY_BMSR_LS) == 0) ++ mii_info->link = 0; ++ else ++ mii_info->link = 1; ++ ++ /* If we are autonegotiating, and not done, ++ * return an error */ ++ if (mii_info->autoneg && !(status & PHY_BMSR_AUTN_COMP)) ++ return -EAGAIN; ++ ++ return 0; ++} ++ ++static int genmii_read_status (struct uec_mii_info *mii_info) ++{ ++ u16 status; ++ int err; ++ ++ /* Update the link, but return if there ++ * was an error */ ++ err = genmii_update_link (mii_info); ++ if (err) ++ return err; ++ ++ if (mii_info->autoneg) { ++ status = phy_read (mii_info, PHY_ANLPAR); ++ ++ if (status & (PHY_ANLPAR_10FD | PHY_ANLPAR_TXFD)) ++ mii_info->duplex = DUPLEX_FULL; ++ else ++ mii_info->duplex = DUPLEX_HALF; ++ if (status & (PHY_ANLPAR_TXFD | PHY_ANLPAR_TX)) ++ mii_info->speed = SPEED_100; ++ else ++ mii_info->speed = SPEED_10; ++ mii_info->pause = 0; ++ } ++ /* On non-aneg, we assume what we put in BMCR is the speed, ++ * though magic-aneg shouldn't prevent this case from occurring ++ */ ++ ++ return 0; ++} ++ ++static int marvell_read_status (struct uec_mii_info *mii_info) ++{ ++ u16 status; ++ int err; ++ ++ /* Update the link, but return if there ++ * was an error */ ++ err = genmii_update_link (mii_info); ++ if (err) ++ return err; ++ ++ /* If the link is up, read the speed and duplex */ ++ /* If we aren't autonegotiating, assume speeds ++ * are as set */ ++ if (mii_info->autoneg && mii_info->link) { ++ int speed; ++ ++ status = phy_read (mii_info, MII_M1011_PHY_SPEC_STATUS); ++ ++ /* Get the duplexity */ ++ if (status & MII_M1011_PHY_SPEC_STATUS_FULLDUPLEX) ++ mii_info->duplex = DUPLEX_FULL; ++ else ++ mii_info->duplex = DUPLEX_HALF; ++ ++ /* Get the speed */ ++ speed = status & MII_M1011_PHY_SPEC_STATUS_SPD_MASK; ++ switch (speed) { ++ case MII_M1011_PHY_SPEC_STATUS_1000: ++ mii_info->speed = SPEED_1000; ++ break; ++ case MII_M1011_PHY_SPEC_STATUS_100: ++ mii_info->speed = SPEED_100; ++ break; ++ default: ++ mii_info->speed = SPEED_10; ++ break; ++ } ++ mii_info->pause = 0; ++ } ++ ++ return 0; ++} ++ ++static int marvell_ack_interrupt (struct uec_mii_info *mii_info) ++{ ++ /* Clear the interrupts by reading the reg */ ++ phy_read (mii_info, MII_M1011_IEVENT); ++ ++ return 0; ++} ++ ++static int marvell_config_intr (struct uec_mii_info *mii_info) ++{ ++ if (mii_info->interrupts == MII_INTERRUPT_ENABLED) ++ phy_write (mii_info, MII_M1011_IMASK, MII_M1011_IMASK_INIT); ++ else ++ phy_write (mii_info, MII_M1011_IMASK, MII_M1011_IMASK_CLEAR); ++ ++ return 0; ++} ++ ++static int dm9161_init (struct uec_mii_info *mii_info) ++{ ++ /* Reset the PHY */ ++ phy_write (mii_info, PHY_BMCR, phy_read (mii_info, PHY_BMCR) | ++ PHY_BMCR_RESET); ++ /* PHY and MAC connect */ ++ phy_write (mii_info, PHY_BMCR, phy_read (mii_info, PHY_BMCR) & ++ ~PHY_BMCR_ISO); ++#ifdef CONFIG_RMII_MODE ++ phy_write (mii_info, MII_DM9161_SCR, MII_DM9161_SCR_RMII_INIT); ++#else ++ phy_write (mii_info, MII_DM9161_SCR, MII_DM9161_SCR_INIT); ++#endif ++ config_genmii_advert (mii_info); ++ /* Start/restart aneg */ ++ genmii_config_aneg (mii_info); ++ /* Delay to wait the aneg compeleted */ ++ udelay (3000000); ++ ++ return 0; ++} ++ ++static int dm9161_config_aneg (struct uec_mii_info *mii_info) ++{ ++ return 0; ++} ++ ++static int dm9161_read_status (struct uec_mii_info *mii_info) ++{ ++ u16 status; ++ int err; ++ ++ /* Update the link, but return if there was an error */ ++ err = genmii_update_link (mii_info); ++ if (err) ++ return err; ++ /* If the link is up, read the speed and duplex ++ If we aren't autonegotiating assume speeds are as set */ ++ if (mii_info->autoneg && mii_info->link) { ++ status = phy_read (mii_info, MII_DM9161_SCSR); ++ if (status & (MII_DM9161_SCSR_100F | MII_DM9161_SCSR_100H)) ++ mii_info->speed = SPEED_100; ++ else ++ mii_info->speed = SPEED_10; ++ ++ if (status & (MII_DM9161_SCSR_100F | MII_DM9161_SCSR_10F)) ++ mii_info->duplex = DUPLEX_FULL; ++ else ++ mii_info->duplex = DUPLEX_HALF; ++ } ++ ++ return 0; ++} ++ ++static int dm9161_ack_interrupt (struct uec_mii_info *mii_info) ++{ ++ /* Clear the interrupt by reading the reg */ ++ phy_read (mii_info, MII_DM9161_INTR); ++ ++ return 0; ++} ++ ++static int dm9161_config_intr (struct uec_mii_info *mii_info) ++{ ++ if (mii_info->interrupts == MII_INTERRUPT_ENABLED) ++ phy_write (mii_info, MII_DM9161_INTR, MII_DM9161_INTR_INIT); ++ else ++ phy_write (mii_info, MII_DM9161_INTR, MII_DM9161_INTR_STOP); ++ ++ return 0; ++} ++ ++static void dm9161_close (struct uec_mii_info *mii_info) ++{ ++} ++ ++static struct phy_info phy_info_dm9161 = { ++ .phy_id = 0x0181b880, ++ .phy_id_mask = 0x0ffffff0, ++ .name = "Davicom DM9161E", ++ .init = dm9161_init, ++ .config_aneg = dm9161_config_aneg, ++ .read_status = dm9161_read_status, ++ .close = dm9161_close, ++}; ++ ++static struct phy_info phy_info_dm9161a = { ++ .phy_id = 0x0181b8a0, ++ .phy_id_mask = 0x0ffffff0, ++ .name = "Davicom DM9161A", ++ .features = MII_BASIC_FEATURES, ++ .init = dm9161_init, ++ .config_aneg = dm9161_config_aneg, ++ .read_status = dm9161_read_status, ++ .ack_interrupt = dm9161_ack_interrupt, ++ .config_intr = dm9161_config_intr, ++ .close = dm9161_close, ++}; ++ ++static struct phy_info phy_info_marvell = { ++ .phy_id = 0x01410c00, ++ .phy_id_mask = 0xffffff00, ++ .name = "Marvell 88E11x1", ++ .features = MII_GBIT_FEATURES, ++ .config_aneg = &marvell_config_aneg, ++ .read_status = &marvell_read_status, ++ .ack_interrupt = &marvell_ack_interrupt, ++ .config_intr = &marvell_config_intr, ++}; ++ ++static struct phy_info phy_info_genmii = { ++ .phy_id = 0x00000000, ++ .phy_id_mask = 0x00000000, ++ .name = "Generic MII", ++ .features = MII_BASIC_FEATURES, ++ .config_aneg = genmii_config_aneg, ++ .read_status = genmii_read_status, ++}; ++ ++static struct phy_info *phy_info[] = { ++ &phy_info_dm9161, ++ &phy_info_dm9161a, ++ &phy_info_marvell, ++ &phy_info_genmii, ++ NULL ++}; ++ ++u16 phy_read (struct uec_mii_info *mii_info, u16 regnum) ++{ ++ return mii_info->mdio_read (mii_info->dev, mii_info->mii_id, regnum); ++} ++ ++void phy_write (struct uec_mii_info *mii_info, u16 regnum, u16 val) ++{ ++ mii_info->mdio_write (mii_info->dev, mii_info->mii_id, regnum, val); ++} ++ ++/* Use the PHY ID registers to determine what type of PHY is attached ++ * to device dev. return a struct phy_info structure describing that PHY ++ */ ++struct phy_info *get_phy_info (struct uec_mii_info *mii_info) ++{ ++ u16 phy_reg; ++ u32 phy_ID; ++ int i; ++ struct phy_info *theInfo = NULL; ++ ++ /* Grab the bits from PHYIR1, and put them in the upper half */ ++ phy_reg = phy_read (mii_info, PHY_PHYIDR1); ++ phy_ID = (phy_reg & 0xffff) << 16; ++ ++ /* Grab the bits from PHYIR2, and put them in the lower half */ ++ phy_reg = phy_read (mii_info, PHY_PHYIDR2); ++ phy_ID |= (phy_reg & 0xffff); ++ ++ /* loop through all the known PHY types, and find one that */ ++ /* matches the ID we read from the PHY. */ ++ for (i = 0; phy_info[i]; i++) ++ if (phy_info[i]->phy_id == ++ (phy_ID & phy_info[i]->phy_id_mask)) { ++ theInfo = phy_info[i]; ++ break; ++ } ++ ++ /* This shouldn't happen, as we have generic PHY support */ ++ if (theInfo == NULL) { ++ ugphy_info ("UEC: PHY id %x is not supported!", phy_ID); ++ return NULL; ++ } else { ++ ugphy_info ("UEC: PHY is %s (%x)", theInfo->name, phy_ID); ++ } ++ ++ return theInfo; ++} ++ ++void marvell_phy_interface_mode (struct eth_device *dev, ++ enet_interface_e mode) ++{ ++ uec_private_t *uec = (uec_private_t *) dev->priv; ++ struct uec_mii_info *mii_info; ++ ++ if (!uec->mii_info) { ++ printf ("%s: the PHY not intialized\n", __FUNCTION__); ++ return; ++ } ++ mii_info = uec->mii_info; ++ ++ if (mode == ENET_100_RGMII) { ++ phy_write (mii_info, 0x00, 0x9140); ++ phy_write (mii_info, 0x1d, 0x001f); ++ phy_write (mii_info, 0x1e, 0x200c); ++ phy_write (mii_info, 0x1d, 0x0005); ++ phy_write (mii_info, 0x1e, 0x0000); ++ phy_write (mii_info, 0x1e, 0x0100); ++ phy_write (mii_info, 0x09, 0x0e00); ++ phy_write (mii_info, 0x04, 0x01e1); ++ phy_write (mii_info, 0x00, 0x9140); ++ phy_write (mii_info, 0x00, 0x1000); ++ udelay (100000); ++ phy_write (mii_info, 0x00, 0x2900); ++ phy_write (mii_info, 0x14, 0x0cd2); ++ phy_write (mii_info, 0x00, 0xa100); ++ phy_write (mii_info, 0x09, 0x0000); ++ phy_write (mii_info, 0x1b, 0x800b); ++ phy_write (mii_info, 0x04, 0x05e1); ++ phy_write (mii_info, 0x00, 0xa100); ++ phy_write (mii_info, 0x00, 0x2100); ++ udelay (1000000); ++ } else if (mode == ENET_10_RGMII) { ++ phy_write (mii_info, 0x14, 0x8e40); ++ phy_write (mii_info, 0x1b, 0x800b); ++ phy_write (mii_info, 0x14, 0x0c82); ++ phy_write (mii_info, 0x00, 0x8100); ++ udelay (1000000); ++ } ++} ++ ++void change_phy_interface_mode (struct eth_device *dev, enet_interface_e mode) ++{ ++#ifdef CONFIG_PHY_MODE_NEED_CHANGE ++ marvell_phy_interface_mode (dev, mode); ++#endif ++} ++#endif /* CONFIG_QE */ +diff -Naupr u-boot-1.1.6/drivers/qe/uec_phy.h u-boot-1.1.6-fsl-1/drivers/qe/uec_phy.h +--- u-boot-1.1.6/drivers/qe/uec_phy.h 1969-12-31 18:00:00.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/drivers/qe/uec_phy.h 2006-12-06 10:33:49.000000000 -0600 +@@ -0,0 +1,259 @@ ++/* ++ * Copyright (C) 2005 Freescale Semiconductor, Inc. ++ * ++ * Author: Shlomi Gridish <gridish@freescale.com> ++ * ++ * Description: UCC ethernet driver -- PHY handling ++ * Driver for UEC on QE ++ * Based on 8260_io/fcc_enet.c ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License as published by the ++ * Free Software Foundation; either version 2 of the License, or (at your ++ * option) any later version. ++ * ++ */ ++#ifndef __UEC_PHY_H__ ++#define __UEC_PHY_H__ ++ ++#define MII_end ((u32)-2) ++#define MII_read ((u32)-1) ++ ++#define MIIMIND_BUSY 0x00000001 ++#define MIIMIND_NOTVALID 0x00000004 ++ ++#define UGETH_AN_TIMEOUT 2000 ++ ++/* 1000BT control (Marvell & BCM54xx at least) */ ++#define MII_1000BASETCONTROL 0x09 ++#define MII_1000BASETCONTROL_FULLDUPLEXCAP 0x0200 ++#define MII_1000BASETCONTROL_HALFDUPLEXCAP 0x0100 ++ ++/* Cicada Extended Control Register 1 */ ++#define MII_CIS8201_EXT_CON1 0x17 ++#define MII_CIS8201_EXTCON1_INIT 0x0000 ++ ++/* Cicada Interrupt Mask Register */ ++#define MII_CIS8201_IMASK 0x19 ++#define MII_CIS8201_IMASK_IEN 0x8000 ++#define MII_CIS8201_IMASK_SPEED 0x4000 ++#define MII_CIS8201_IMASK_LINK 0x2000 ++#define MII_CIS8201_IMASK_DUPLEX 0x1000 ++#define MII_CIS8201_IMASK_MASK 0xf000 ++ ++/* Cicada Interrupt Status Register */ ++#define MII_CIS8201_ISTAT 0x1a ++#define MII_CIS8201_ISTAT_STATUS 0x8000 ++#define MII_CIS8201_ISTAT_SPEED 0x4000 ++#define MII_CIS8201_ISTAT_LINK 0x2000 ++#define MII_CIS8201_ISTAT_DUPLEX 0x1000 ++ ++/* Cicada Auxiliary Control/Status Register */ ++#define MII_CIS8201_AUX_CONSTAT 0x1c ++#define MII_CIS8201_AUXCONSTAT_INIT 0x0004 ++#define MII_CIS8201_AUXCONSTAT_DUPLEX 0x0020 ++#define MII_CIS8201_AUXCONSTAT_SPEED 0x0018 ++#define MII_CIS8201_AUXCONSTAT_GBIT 0x0010 ++#define MII_CIS8201_AUXCONSTAT_100 0x0008 ++ ++/* 88E1011 PHY Status Register */ ++#define MII_M1011_PHY_SPEC_STATUS 0x11 ++#define MII_M1011_PHY_SPEC_STATUS_1000 0x8000 ++#define MII_M1011_PHY_SPEC_STATUS_100 0x4000 ++#define MII_M1011_PHY_SPEC_STATUS_SPD_MASK 0xc000 ++#define MII_M1011_PHY_SPEC_STATUS_FULLDUPLEX 0x2000 ++#define MII_M1011_PHY_SPEC_STATUS_RESOLVED 0x0800 ++#define MII_M1011_PHY_SPEC_STATUS_LINK 0x0400 ++ ++#define MII_M1011_IEVENT 0x13 ++#define MII_M1011_IEVENT_CLEAR 0x0000 ++ ++#define MII_M1011_IMASK 0x12 ++#define MII_M1011_IMASK_INIT 0x6400 ++#define MII_M1011_IMASK_CLEAR 0x0000 ++ ++#define MII_DM9161_SCR 0x10 ++#define MII_DM9161_SCR_INIT 0x0610 ++#define MII_DM9161_SCR_RMII_INIT 0x0710 ++ ++/* DM9161 Specified Configuration and Status Register */ ++#define MII_DM9161_SCSR 0x11 ++#define MII_DM9161_SCSR_100F 0x8000 ++#define MII_DM9161_SCSR_100H 0x4000 ++#define MII_DM9161_SCSR_10F 0x2000 ++#define MII_DM9161_SCSR_10H 0x1000 ++ ++/* DM9161 Interrupt Register */ ++#define MII_DM9161_INTR 0x15 ++#define MII_DM9161_INTR_PEND 0x8000 ++#define MII_DM9161_INTR_DPLX_MASK 0x0800 ++#define MII_DM9161_INTR_SPD_MASK 0x0400 ++#define MII_DM9161_INTR_LINK_MASK 0x0200 ++#define MII_DM9161_INTR_MASK 0x0100 ++#define MII_DM9161_INTR_DPLX_CHANGE 0x0010 ++#define MII_DM9161_INTR_SPD_CHANGE 0x0008 ++#define MII_DM9161_INTR_LINK_CHANGE 0x0004 ++#define MII_DM9161_INTR_INIT 0x0000 ++#define MII_DM9161_INTR_STOP \ ++(MII_DM9161_INTR_DPLX_MASK | MII_DM9161_INTR_SPD_MASK \ ++ | MII_DM9161_INTR_LINK_MASK | MII_DM9161_INTR_MASK) ++ ++/* DM9161 10BT Configuration/Status */ ++#define MII_DM9161_10BTCSR 0x12 ++#define MII_DM9161_10BTCSR_INIT 0x7800 ++ ++#define MII_BASIC_FEATURES (SUPPORTED_10baseT_Half | \ ++ SUPPORTED_10baseT_Full | \ ++ SUPPORTED_100baseT_Half | \ ++ SUPPORTED_100baseT_Full | \ ++ SUPPORTED_Autoneg | \ ++ SUPPORTED_TP | \ ++ SUPPORTED_MII) ++ ++#define MII_GBIT_FEATURES (MII_BASIC_FEATURES | \ ++ SUPPORTED_1000baseT_Half | \ ++ SUPPORTED_1000baseT_Full) ++ ++#define MII_READ_COMMAND 0x00000001 ++ ++#define MII_INTERRUPT_DISABLED 0x0 ++#define MII_INTERRUPT_ENABLED 0x1 ++ ++#define SPEED_10 10 ++#define SPEED_100 100 ++#define SPEED_1000 1000 ++ ++/* Duplex, half or full. */ ++#define DUPLEX_HALF 0x00 ++#define DUPLEX_FULL 0x01 ++ ++/* Indicates what features are supported by the interface. */ ++#define SUPPORTED_10baseT_Half (1 << 0) ++#define SUPPORTED_10baseT_Full (1 << 1) ++#define SUPPORTED_100baseT_Half (1 << 2) ++#define SUPPORTED_100baseT_Full (1 << 3) ++#define SUPPORTED_1000baseT_Half (1 << 4) ++#define SUPPORTED_1000baseT_Full (1 << 5) ++#define SUPPORTED_Autoneg (1 << 6) ++#define SUPPORTED_TP (1 << 7) ++#define SUPPORTED_AUI (1 << 8) ++#define SUPPORTED_MII (1 << 9) ++#define SUPPORTED_FIBRE (1 << 10) ++#define SUPPORTED_BNC (1 << 11) ++#define SUPPORTED_10000baseT_Full (1 << 12) ++ ++#define ADVERTISED_10baseT_Half (1 << 0) ++#define ADVERTISED_10baseT_Full (1 << 1) ++#define ADVERTISED_100baseT_Half (1 << 2) ++#define ADVERTISED_100baseT_Full (1 << 3) ++#define ADVERTISED_1000baseT_Half (1 << 4) ++#define ADVERTISED_1000baseT_Full (1 << 5) ++#define ADVERTISED_Autoneg (1 << 6) ++#define ADVERTISED_TP (1 << 7) ++#define ADVERTISED_AUI (1 << 8) ++#define ADVERTISED_MII (1 << 9) ++#define ADVERTISED_FIBRE (1 << 10) ++#define ADVERTISED_BNC (1 << 11) ++#define ADVERTISED_10000baseT_Full (1 << 12) ++ ++/* Advertisement control register. */ ++#define ADVERTISE_SLCT 0x001f /* Selector bits */ ++#define ADVERTISE_CSMA 0x0001 /* Only selector supported */ ++#define ADVERTISE_10HALF 0x0020 /* Try for 10mbps half-duplex */ ++#define ADVERTISE_10FULL 0x0040 /* Try for 10mbps full-duplex */ ++#define ADVERTISE_100HALF 0x0080 /* Try for 100mbps half-duplex */ ++#define ADVERTISE_100FULL 0x0100 /* Try for 100mbps full-duplex */ ++#define ADVERTISE_100BASE4 0x0200 /* Try for 100mbps 4k packets */ ++#define ADVERTISE_RESV 0x1c00 /* Unused... */ ++#define ADVERTISE_RFAULT 0x2000 /* Say we can detect faults */ ++#define ADVERTISE_LPACK 0x4000 /* Ack link partners response */ ++#define ADVERTISE_NPAGE 0x8000 /* Next page bit */ ++ ++#define ADVERTISE_FULL (ADVERTISE_100FULL | ADVERTISE_10FULL | \ ++ ADVERTISE_CSMA) ++#define ADVERTISE_ALL (ADVERTISE_10HALF | ADVERTISE_10FULL | \ ++ ADVERTISE_100HALF | ADVERTISE_100FULL) ++ ++/* Taken from mii_if_info and sungem_phy.h */ ++struct uec_mii_info { ++ /* Information about the PHY type */ ++ /* And management functions */ ++ struct phy_info *phyinfo; ++ ++ struct eth_device *dev; ++ ++ /* forced speed & duplex (no autoneg) ++ * partner speed & duplex & pause (autoneg) ++ */ ++ int speed; ++ int duplex; ++ int pause; ++ ++ /* The most recently read link state */ ++ int link; ++ ++ /* Enabled Interrupts */ ++ u32 interrupts; ++ ++ u32 advertising; ++ int autoneg; ++ int mii_id; ++ ++ /* private data pointer */ ++ /* For use by PHYs to maintain extra state */ ++ void *priv; ++ ++ /* Provided by ethernet driver */ ++ int (*mdio_read) (struct eth_device * dev, int mii_id, int reg); ++ void (*mdio_write) (struct eth_device * dev, int mii_id, int reg, ++ int val); ++}; ++ ++/* struct phy_info: a structure which defines attributes for a PHY ++ * ++ * id will contain a number which represents the PHY. During ++ * startup, the driver will poll the PHY to find out what its ++ * UID--as defined by registers 2 and 3--is. The 32-bit result ++ * gotten from the PHY will be ANDed with phy_id_mask to ++ * discard any bits which may change based on revision numbers ++ * unimportant to functionality ++ * ++ * There are 6 commands which take a ugeth_mii_info structure. ++ * Each PHY must declare config_aneg, and read_status. ++ */ ++struct phy_info { ++ u32 phy_id; ++ char *name; ++ unsigned int phy_id_mask; ++ u32 features; ++ ++ /* Called to initialize the PHY */ ++ int (*init) (struct uec_mii_info * mii_info); ++ ++ /* Called to suspend the PHY for power */ ++ int (*suspend) (struct uec_mii_info * mii_info); ++ ++ /* Reconfigures autonegotiation (or disables it) */ ++ int (*config_aneg) (struct uec_mii_info * mii_info); ++ ++ /* Determines the negotiated speed and duplex */ ++ int (*read_status) (struct uec_mii_info * mii_info); ++ ++ /* Clears any pending interrupts */ ++ int (*ack_interrupt) (struct uec_mii_info * mii_info); ++ ++ /* Enables or disables interrupts */ ++ int (*config_intr) (struct uec_mii_info * mii_info); ++ ++ /* Clears up any memory if needed */ ++ void (*close) (struct uec_mii_info * mii_info); ++}; ++ ++struct phy_info *get_phy_info (struct uec_mii_info *mii_info); ++void write_phy_reg (struct eth_device *dev, int mii_id, int regnum, ++ int value); ++int read_phy_reg (struct eth_device *dev, int mii_id, int regnum); ++void mii_clear_phy_interrupt (struct uec_mii_info *mii_info); ++void mii_configure_phy_interrupt (struct uec_mii_info *mii_info, ++ u32 interrupts); ++#endif /* __UEC_PHY_H__ */ +diff -Naupr u-boot-1.1.6/drivers/tsec.c u-boot-1.1.6-fsl-1/drivers/tsec.c +--- u-boot-1.1.6/drivers/tsec.c 2006-11-02 08:15:01.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/drivers/tsec.c 2006-11-10 11:24:29.000000000 -0600 +@@ -610,11 +610,10 @@ static void adjust_link(struct eth_devic + regs->maccfg2 = ((regs->maccfg2 & ~(MACCFG2_IF)) + | MACCFG2_MII); + +- /* If We're in reduced mode, we need +- * to say whether we're 10 or 100 MB. ++ /* Set R100 bit in all modes although ++ * it is only used in RGMII mode + */ +- if ((priv->speed == 100) +- && (priv->flags & TSEC_REDUCED)) ++ if (priv->speed == 100) + regs->ecntrl |= ECNTRL_R100; + else + regs->ecntrl &= ~(ECNTRL_R100); +@@ -816,6 +815,7 @@ struct phy_info phy_info_M88E1111S = { + {0x1d, 0x5, NULL}, + {0x1e, 0x0, NULL}, + {0x1e, 0x100, NULL}, ++ {0x14, 0x0cd2, NULL}, /* Delay RGMII TX and RX */ + {MIIM_GBIT_CONTROL, MIIM_GBIT_CONTROL_INIT, NULL}, + {MIIM_ANAR, MIIM_ANAR_INIT, NULL}, + {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL}, +@@ -1110,10 +1110,8 @@ struct phy_info phy_info_dp83865 = { + }; + + struct phy_info *phy_info[] = { +-#if 0 +- &phy_info_cis8201, +-#endif + &phy_info_cis8204, ++ &phy_info_cis8201, + &phy_info_M88E1011S, + &phy_info_M88E1111S, + &phy_info_M88E1145, +diff -Naupr u-boot-1.1.6/drivers/tsec.h u-boot-1.1.6-fsl-1/drivers/tsec.h +--- u-boot-1.1.6/drivers/tsec.h 2006-11-02 08:15:01.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/drivers/tsec.h 2006-11-10 11:24:29.000000000 -0600 +@@ -30,7 +30,7 @@ + #if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx) + #define TSEC_BASE_ADDR (CFG_IMMR + CFG_TSEC1_OFFSET) + #elif defined(CONFIG_MPC83XX) +- #define TSEC_BASE_ADDR (CFG_IMMRBAR + CFG_TSEC1_OFFSET) ++ #define TSEC_BASE_ADDR (CFG_IMMR + CFG_TSEC1_OFFSET) + #endif + + +diff -Naupr u-boot-1.1.6/include/74xx_7xx.h u-boot-1.1.6-fsl-1/include/74xx_7xx.h +--- u-boot-1.1.6/include/74xx_7xx.h 2006-11-02 08:15:01.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/include/74xx_7xx.h 2006-12-06 10:33:49.000000000 -0600 +@@ -111,6 +111,7 @@ typedef enum __cpu_t { + CPU_750CX, CPU_750FX, CPU_750GX, + CPU_7400, + CPU_7410, ++ CPU_7448, + CPU_7450, CPU_7455, CPU_7457, + CPU_UNKNOWN} cpu_t; + +diff -Naupr u-boot-1.1.6/include/ACEX1K.h u-boot-1.1.6-fsl-1/include/ACEX1K.h +--- u-boot-1.1.6/include/ACEX1K.h 2006-11-02 08:15:01.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/include/ACEX1K.h 2006-11-30 12:34:13.000000000 -0600 +@@ -35,6 +35,11 @@ extern int ACEX1K_dump( Altera_desc *des + extern int ACEX1K_info( Altera_desc *desc ); + extern int ACEX1K_reloc( Altera_desc *desc, ulong reloc_off ); + ++extern int CYC2_load( Altera_desc *desc, void *image, size_t size ); ++extern int CYC2_dump( Altera_desc *desc, void *buf, size_t bsize ); ++extern int CYC2_info( Altera_desc *desc ); ++extern int CYC2_reloc( Altera_desc *desc, ulong reloc_off ); ++ + /* Slave Serial Implementation function table */ + typedef struct { + Altera_pre_fn pre; +@@ -48,6 +53,18 @@ typedef struct { + int relocated; + } Altera_ACEX1K_Passive_Serial_fns; + ++/* Slave Serial Implementation function table */ ++typedef struct { ++ Altera_pre_fn pre; ++ Altera_config_fn config; ++ Altera_status_fn status; ++ Altera_done_fn done; ++ Altera_write_fn write; ++ Altera_abort_fn abort; ++ Altera_post_fn post; ++ int relocated; ++} Altera_CYC2_Passive_Serial_fns; ++ + /* Device Image Sizes + *********************************************************************/ + /* ACEX1K */ +@@ -60,6 +77,8 @@ typedef struct { + #endif + #define Altera_EP1K100_SIZE (166965*8) + ++#define Altera_EP2C35_SIZE 883905 ++ + /* Descriptor Macros + *********************************************************************/ + /* ACEX1K devices */ +diff -Naupr u-boot-1.1.6/include/altera.h u-boot-1.1.6-fsl-1/include/altera.h +--- u-boot-1.1.6/include/altera.h 2006-11-02 08:15:01.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/include/altera.h 2006-11-30 12:34:13.000000000 -0600 +@@ -34,8 +34,10 @@ + /* Altera Model definitions + *********************************************************************/ + #define CFG_ACEX1K CFG_FPGA_DEV( 0x1 ) ++#define CFG_CYCLON2 CFG_FPGA_DEV( 0x2 ) + + #define CFG_ALTERA_ACEX1K (CFG_FPGA_ALTERA | CFG_ACEX1K) ++#define CFG_ALTERA_CYCLON2 (CFG_FPGA_ALTERA | CFG_CYCLON2) + /* Add new models here */ + + /* Altera Interface definitions +@@ -56,6 +58,7 @@ typedef enum { /* typedef Altera_ifac + typedef enum { /* typedef Altera_Family */ + min_altera_type, /* insert all new types after this */ + Altera_ACEX1K, /* ACEX1K Family */ ++ Altera_CYC2, /* CYCLONII Family */ + /* Add new models here */ + max_altera_type /* insert all new types before this */ + } Altera_Family; /* end, typedef Altera_Family */ +@@ -84,6 +87,7 @@ typedef int (*Altera_status_fn)( int coo + typedef int (*Altera_done_fn)( int cookie ); + typedef int (*Altera_clk_fn)( int assert_clk, int flush, int cookie ); + typedef int (*Altera_data_fn)( int assert_data, int flush, int cookie ); ++typedef int (*Altera_write_fn)(void *buf, size_t len, int flush, int cookie); + typedef int (*Altera_abort_fn)( int cookie ); + typedef int (*Altera_post_fn)( int cookie ); + +diff -Naupr u-boot-1.1.6/include/asm-ppc/e300.h u-boot-1.1.6-fsl-1/include/asm-ppc/e300.h +--- u-boot-1.1.6/include/asm-ppc/e300.h 2006-11-02 08:15:01.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/include/asm-ppc/e300.h 2006-11-10 11:24:29.000000000 -0600 +@@ -12,6 +12,8 @@ + #define PVR_83xx 0x80830000 + #define PVR_8349_REV10 (PVR_83xx | 0x0010) + #define PVR_8349_REV11 (PVR_83xx | 0x0011) ++#define PVR_8360_REV10 (PVR_83xx | 0x0020) ++#define PVR_8360_REV11 (PVR_83xx | 0x0020) + + /* + * Hardware Implementation-Dependent Register 0 (HID0) +diff -Naupr u-boot-1.1.6/include/asm-ppc/fsl_i2c.h u-boot-1.1.6-fsl-1/include/asm-ppc/fsl_i2c.h +--- u-boot-1.1.6/include/asm-ppc/fsl_i2c.h 2006-11-02 08:15:01.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/include/asm-ppc/fsl_i2c.h 2006-11-30 12:34:13.000000000 -0600 +@@ -83,8 +83,4 @@ typedef struct fsl_i2c { + u8 res6[0xE8]; + } fsl_i2c_t; + +- +-#define I2C_READ 1 +-#define I2C_WRITE 0 +- + #endif /* _ASM_I2C_H_ */ +diff -Naupr u-boot-1.1.6/include/asm-ppc/global_data.h u-boot-1.1.6-fsl-1/include/asm-ppc/global_data.h +--- u-boot-1.1.6/include/asm-ppc/global_data.h 2006-11-02 08:15:01.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/include/asm-ppc/global_data.h 2006-11-10 11:24:29.000000000 -0600 +@@ -52,17 +52,29 @@ typedef struct global_data { + #if defined(CONFIG_MPC83XX) + /* There are other clocks in the MPC83XX */ + u32 csb_clk; ++#if defined (CONFIG_MPC8349) + u32 tsec1_clk; + u32 tsec2_clk; +- u32 core_clk; + u32 usbmph_clk; + u32 usbdr_clk; +- u32 i2c_clk; ++#endif /* CONFIG_MPC8349 */ ++ u32 core_clk; ++ u32 i2c1_clk; ++ u32 i2c2_clk; + u32 enc_clk; + u32 lbiu_clk; + u32 lclk_clk; + u32 ddr_clk; + u32 pci_clk; ++#if defined(CONFIG_QE) ++ u32 qe_clk; ++ u32 brg_clk; ++ uint mp_alloc_base; ++ uint mp_alloc_top; ++#endif /* CONFIG_QE */ ++#if defined (CONFIG_MPC8360) ++ u32 ddr_sec_clk; ++#endif /* CONFIG_MPC8360 */ + #endif + #if defined(CONFIG_MPC5xxx) + unsigned long ipb_clk; +diff -Naupr u-boot-1.1.6/include/asm-ppc/i2c.h u-boot-1.1.6-fsl-1/include/asm-ppc/i2c.h +--- u-boot-1.1.6/include/asm-ppc/i2c.h 2006-11-02 08:15:01.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/include/asm-ppc/i2c.h 1969-12-31 18:00:00.000000000 -0600 +@@ -1,103 +0,0 @@ +-/* +- * Freescale I2C Controller +- * +- * This software may be used and distributed according to the +- * terms of the GNU Public License, Version 2, incorporated +- * herein by reference. +- * +- * Copyright 2004 Freescale Semiconductor. +- * (C) Copyright 2003, Motorola, Inc. +- * author: Eran Liberty (liberty@freescale.com) +- * +- * This program is free software; you can redistribute it and/or +- * modify it under the terms of the GNU General Public License as +- * published by the Free Software Foundation; either version 2 of +- * the License, or (at your option) any later version. +- * +- * This program is distributed in the hope that it will be useful, +- * but WITHOUT ANY WARRANTY; without even the implied warranty of +- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +- * GNU General Public License for more details. +- * +- * You should have received a copy of the GNU General Public License +- * along with this program; if not, write to the Free Software +- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, +- * MA 02111-1307 USA +- */ +- +-#ifndef _ASM_I2C_H_ +-#define _ASM_I2C_H_ +- +-#include <asm/types.h> +- +-typedef struct i2c +-{ +- u8 adr; /**< I2C slave address */ +-#define I2C_ADR 0xFE +-#define I2C_ADR_SHIFT 1 +-#define I2C_ADR_RES ~(I2C_ADR) +- u8 res0[3]; +- u8 fdr; /**< I2C frequency divider register */ +-#define IC2_FDR 0x3F +-#define IC2_FDR_SHIFT 0 +-#define IC2_FDR_RES ~(IC2_FDR) +- u8 res1[3]; +- u8 cr; /**< I2C control redister */ +-#define I2C_CR_MEN 0x80 +-#define I2C_CR_MIEN 0x40 +-#define I2C_CR_MSTA 0x20 +-#define I2C_CR_MTX 0x10 +-#define I2C_CR_TXAK 0x08 +-#define I2C_CR_RSTA 0x04 +-#define I2C_CR_BCST 0x01 +- u8 res2[3]; +- u8 sr; /**< I2C status register */ +-#define I2C_SR_MCF 0x80 +-#define I2C_SR_MAAS 0x40 +-#define I2C_SR_MBB 0x20 +-#define I2C_SR_MAL 0x10 +-#define I2C_SR_BCSTM 0x08 +-#define I2C_SR_SRW 0x04 +-#define I2C_SR_MIF 0x02 +-#define I2C_SR_RXAK 0x01 +- u8 res3[3]; +- u8 dr; /**< I2C data register */ +-#define I2C_DR 0xFF +-#define I2C_DR_SHIFT 0 +-#define I2C_DR_RES ~(I2C_DR) +- u8 res4[3]; +- u8 dfsrr; /**< I2C digital filter sampling rate register */ +-#define I2C_DFSRR 0x3F +-#define I2C_DFSRR_SHIFT 0 +-#define I2C_DFSRR_RES ~(I2C_DR) +- u8 res5[3]; +- u8 res6[0xE8]; +-} i2c_t; +- +-#ifndef CFG_HZ +-#error CFG_HZ is not defined in /include/configs/${BOARD}.h +-#endif +-#define I2C_TIMEOUT (CFG_HZ/4) +- +-#ifndef CFG_IMMRBAR +-#error CFG_IMMRBAR is not defined in /include/configs/${BOARD}.h +-#endif +- +-#ifndef CFG_I2C_OFFSET +-#error CFG_I2C_OFFSET is not defined in /include/configs/${BOARD}.h +-#endif +- +-#if defined(CONFIG_MPC8349EMDS) || defined(CONFIG_TQM834X) +-/* +- * MPC8349 have two i2c bus +- */ +-extern i2c_t * mpc8349_i2c; +-#define I2C mpc8349_i2c +-#else +-#define I2C ((i2c_t*)(CFG_IMMRBAR + CFG_I2C_OFFSET)) +-#endif +- +-#define I2C_READ 1 +-#define I2C_WRITE 0 +- +-#endif /* _ASM_I2C_H_ */ +diff -Naupr u-boot-1.1.6/include/asm-ppc/immap_83xx.h u-boot-1.1.6-fsl-1/include/asm-ppc/immap_83xx.h +--- u-boot-1.1.6/include/asm-ppc/immap_83xx.h 2006-11-02 08:15:01.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/include/asm-ppc/immap_83xx.h 2006-12-06 10:33:49.000000000 -0600 +@@ -1,75 +1,116 @@ + /* +- * MPC8349 Internal Memory Map +- * Copyright (c) 2004 Freescale Semiconductor. +- * Eran Liberty (liberty@freescale.com) ++ * (C) Copyright 2004-2006 Freescale Semiconductor, Inc. ++ * ++ * MPC83xx Internal Memory Map ++ * ++ * History : ++ * 20060601: Daveliu (daveliu@freescale.com) ++ * TanyaJiang (tanya.jiang@freescale.com) ++ * Unified variable names for mpc83xx ++ * 2005 : Mandy Lavi (mandy.lavi@freescale.com) ++ * support for mpc8360e ++ * 2004 : Eran Liberty (liberty@freescale.com) ++ * Initialized for mpc8349 ++ * based on: ++ * MPC8260 Internal Memory Map ++ * Copyright (c) 1999 Dan Malek (dmalek@jlc.net) ++ * MPC85xx Internal Memory Map ++ * Copyright(c) 2002,2003 Motorola Inc. ++ * Xianghua Xiao (x.xiao@motorola.com) ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA + * +- * based on: +- * - MPC8260 Internal Memory Map +- * Copyright (c) 1999 Dan Malek (dmalek@jlc.net) +- * - MPC85xx Internal Memory Map +- * Copyright(c) 2002,2003 Motorola Inc. +- * Xianghua Xiao (x.xiao@motorola.com) + */ +-#ifndef __IMMAP_8349__ +-#define __IMMAP_8349__ ++#ifndef __IMMAP_83xx__ ++#define __IMMAP_83xx__ + ++#include <config.h> + #include <asm/types.h> +-#include <asm/i2c.h> ++#include <asm/fsl_i2c.h> + + /* + * Local Access Window. + */ +-typedef struct law8349 { +- u32 bar; /* LBIU local access window base address register */ ++typedef struct law83xx { ++ u32 bar; /* LBIU local access window base address register */ + /* Identifies the 20 most-significant address bits of the base of local + * access window n. The specified base address should be aligned to the + * window size, as defined by LBLAWARn[SIZE]. + */ +-#define LAWBAR_BAR 0xFFFFF000 ++#define LAWBAR_BAR 0xFFFFF000 + #define LAWBAR_RES ~(LAWBAR_BAR) +- u32 ar; /* LBIU local access window attribute register */ +-} law8349_t; ++ u32 ar; /* LBIU local access window attribute register */ ++} law83xx_t; + + /* + * System configuration registers. + */ +-typedef struct sysconf8349 { +- u32 immrbar; /* Internal memory map base address register */ ++typedef struct sysconf83xx { ++ u32 immrbar; /* Internal memory map base address register */ + u8 res0[0x04]; +- u32 altcbar; /* Alternate configuration base address register */ ++ u32 altcbar; /* Alternate configuration base address register */ + /* Identifies the12 most significant address bits of an alternate base + * address used for boot sequencer configuration accesses. + */ + #define ALTCBAR_BASE_ADDR 0xFFF00000 +-#define ALTCBAR_RES ~(ALTCBAR_BASE_ADDR) /* Reserved. Write has no effect, read returns 0. */ ++#define ALTCBAR_RES ~(ALTCBAR_BASE_ADDR) /* Reserved. Write has no effect, read returns 0. */ + u8 res1[0x14]; +- law8349_t lblaw[4]; /* LBIU local access window */ ++ law83xx_t lblaw[4]; /* LBIU local access window */ + u8 res2[0x20]; +- law8349_t pcilaw[2]; /* PCI local access window */ ++ law83xx_t pcilaw[2]; /* PCI local access window */ + u8 res3[0x30]; +- law8349_t ddrlaw[2]; /* DDR local access window */ ++ law83xx_t ddrlaw[2]; /* DDR local access window */ + u8 res4[0x50]; +- u32 sgprl; /* System General Purpose Register Low */ +- u32 sgprh; /* System General Purpose Register High */ +- u32 spridr; /* System Part and Revision ID Register */ +-#define SPRIDR_PARTID 0xFFFF0000 /* Part Identification. */ +-#define SPRIDR_REVID 0x0000FFFF /* Revision Identification. */ ++ u32 sgprl; /* System General Purpose Register Low */ ++ u32 sgprh; /* System General Purpose Register High */ ++ u32 spridr; /* System Part and Revision ID Register */ ++#define SPRIDR_PARTID 0xFFFF0000 /* Part Identification. */ ++#define SPRIDR_REVID 0x0000FFFF /* Revision Identification. */ + u8 res5[0x04]; +- u32 spcr; /* System Priority Configuration Register */ +-#define SPCR_PCIHPE 0x10000000 /* PCI Highest Priority Enable. */ +-#define SPCR_PCIPR 0x03000000 /* PCI bridge system bus request priority. */ +-#define SPCR_TBEN 0x00400000 /* E300 PowerPC core time base unit enable. */ +-#define SPCR_COREPR 0x00300000 /* E300 PowerPC Core system bus request priority. */ +-#define SPCR_TSEC1DP 0x00003000 /* TSEC1 data priority. */ +-#define SPCR_TSEC1BDP 0x00000C00 /* TSEC1 buffer descriptor priority. */ +-#define SPCR_TSEC1EP 0x00000300 /* TSEC1 emergency priority. */ +-#define SPCR_TSEC2DP 0x00000030 /* TSEC2 data priority. */ +-#define SPCR_TSEC2BDP 0x0000000C /* TSEC2 buffer descriptor priority. */ +-#define SPCR_TSEC2EP 0x00000003 /* TSEC2 emergency priority. */ ++ u32 spcr; /* System Priority Configuration Register */ ++#define SPCR_PCIHPE 0x10000000 /* PCI Highest Priority Enable. */ ++#define SPCR_PCIHPE_SHIFT (31-3) ++#define SPCR_PCIPR 0x03000000 /* PCI bridge system bus request priority. */ ++#define SPCR_PCIPR_SHIFT (31-7) ++#define SPCR_OPT 0x00800000 /* Optimize */ ++#define SPCR_TBEN 0x00400000 /* E300 PowerPC core time base unit enable. */ ++#define SPCR_TBEN_SHIFT (31-9) ++#define SPCR_COREPR 0x00300000 /* E300 PowerPC Core system bus request priority. */ ++#define SPCR_COREPR_SHIFT (31-11) ++#if defined (CONFIG_MPC8349) ++#define SPCR_TSEC1DP 0x00003000 /* TSEC1 data priority. */ ++#define SPCR_TSEC1DP_SHIFT (31-19) ++#define SPCR_TSEC1BDP 0x00000C00 /* TSEC1 buffer descriptor priority. */ ++#define SPCR_TSEC1BDP_SHIFT (31-21) ++#define SPCR_TSEC1EP 0x00000300 /* TSEC1 emergency priority. */ ++#define SPCR_TSEC1EP_SHIFT (31-23) ++#define SPCR_TSEC2DP 0x00000030 /* TSEC2 data priority. */ ++#define SPCR_TSEC2DP_SHIFT (31-27) ++#define SPCR_TSEC2BDP 0x0000000C /* TSEC2 buffer descriptor priority. */ ++#define SPCR_TSEC2BDP_SHIFT (31-29) ++#define SPCR_TSEC2EP 0x00000003 /* TSEC2 emergency priority. */ ++#define SPCR_TSEC2EP_SHIFT (31-31) + #define SPCR_RES ~(SPCR_PCIHPE | SPCR_PCIPR | SPCR_TBEN | SPCR_COREPR \ + | SPCR_TSEC1DP | SPCR_TSEC1BDP | SPCR_TSEC1EP \ + | SPCR_TSEC2DP | SPCR_TSEC2BDP | SPCR_TSEC2EP) +- u32 sicrl; /* System General Purpose Register Low */ ++#elif defined (CONFIG_MPC8360) ++#define SPCR_RES ~(SPCR_PCIHPE|SPCR_PCIPR|SPCR_OPT|SPCR_TBEN|SPCR_COREPR) ++#endif ++ u32 sicrl; /* System General Purpose Register Low */ ++#if defined (CONFIG_MPC8349) + #define SICRL_LDP_A 0x80000000 + #define SICRL_USB1 0x40000000 + #define SICRL_USB0 0x20000000 +@@ -91,8 +132,18 @@ typedef struct sysconf8349 { + | SICRL_GPIO1_D | SICRL_GPIO1_E | SICRL_GPIO1_F \ + | SICRL_GPIO1_G | SICRL_GPIO1_H | SICRL_GPIO1_I \ + | SICRL_GPIO1_J | SICRL_GPIO1_K | SICRL_GPIO1_L ) +- u32 sicrh; /* System General Purpose Register High */ ++#elif defined (CONFIG_MPC8360) ++#define SICRL_LDP_A 0xC0000000 ++#define SICRL_LCLK_1 0x10000000 ++#define SICRL_LCLK_2 0x08000000 ++#define SICRL_SRCID_A 0x03000000 ++#define SICRL_IRQ_CKSTP_A 0x00C00000 ++#define SICRL_RES ~(SICRL_LDP_A | SICRL_LCLK_1 | SICRL_LCLK_2 | \ ++ SICRL_SRCID_A | SICRL_IRQ_CKSTP_A) ++#endif ++ u32 sicrh; /* System General Purpose Register High */ + #define SICRH_DDR 0x80000000 ++#if defined (CONFIG_MPC8349) + #define SICRH_TSEC1_A 0x10000000 + #define SICRH_TSEC1_B 0x08000000 + #define SICRH_TSEC1_C 0x04000000 +@@ -117,7 +168,7 @@ typedef struct sysconf8349 { + #define SICRH_GPIO2_H 0x00000060 + #define SICRH_TSOBI1 0x00000002 + #define SICRH_TSOBI2 0x00000001 +-#define SICRh_RES ~( SICRH_DDR | SICRH_TSEC1_A | SICRH_TSEC1_B \ ++#define SICRH_RES ~( SICRH_DDR | SICRH_TSEC1_A | SICRH_TSEC1_B \ + | SICRH_TSEC1_C | SICRH_TSEC1_D | SICRH_TSEC1_E \ + | SICRH_TSEC1_F | SICRH_TSEC2_A | SICRH_TSEC2_B \ + | SICRH_TSEC2_C | SICRH_TSEC2_D | SICRH_TSEC2_E \ +@@ -126,207 +177,256 @@ typedef struct sysconf8349 { + | SICRH_GPIO2_D | SICRH_GPIO2_E | SICRH_GPIO2_F \ + | SICRH_GPIO2_G | SICRH_GPIO2_H | SICRH_TSOBI1 \ + | SICRH_TSOBI2) ++#elif defined (CONFIG_MPC8360) ++#define SICRH_SECONDARY_DDR 0x40000000 ++#define SICRH_SDDROE 0x02000000 /* SDDRIOE bit from reset configuration word high. */ ++#define SICRH_UC1EOBI 0x00000004 /* UCC1 Ethernet Output Buffer Impedance. */ ++#define SICRH_UC2E1OBI 0x00000002 /* UCC2 Ethernet pin option 1 Output Buffer Impedance. */ ++#define SICRH_UC2E2OBI 0x00000001 /* UCC2 Ethernet pin option 2 Output Buffer Impedance. */ ++#define SICRH_RES ~(SICRH_DDR | SICRH_SECONDARY_DDR | SICRH_SDDROE | \ ++ SICRH_UC2E1OBI | SICRH_UC2E2OBI | SICRH_UC2E2OBI) ++#endif + u8 res6[0xE4]; +-} sysconf8349_t; ++} sysconf83xx_t; + + /* + * Watch Dog Timer (WDT) Registers + */ +-typedef struct wdt8349 { ++typedef struct wdt83xx { + u8 res0[4]; +- u32 swcrr; /* System watchdog control register */ +- u32 swcnr; /* System watchdog count register */ ++ u32 swcrr; /* System watchdog control register */ ++ u32 swcnr; /* System watchdog count register */ + #define SWCNR_SWCN 0x0000FFFF Software Watchdog Count Field. + #define SWCNR_RES ~(SWCNR_SWCN) + u8 res1[2]; +- u16 swsrr; /* System watchdog service register */ ++ u16 swsrr; /* System watchdog service register */ ++#define SWSRR_WS 0x0000FFFF /* Software Watchdog Service Field. */ + u8 res2[0xF0]; +-} wdt8349_t; ++} wdt83xx_t; + + /* + * RTC/PIT Module Registers + */ +-typedef struct rtclk8349 { +- u32 cnr; /* control register */ +-#define CNR_CLEN 0x00000080 /* Clock Enable Control Bit */ +-#define CNR_CLIN 0x00000040 /* Input Clock Control Bit */ +-#define CNR_AIM 0x00000002 /* Alarm Interrupt Mask Bit */ +-#define CNR_SIM 0x00000001 /* Second Interrupt Mask Bit */ +-#define CNR_RES ~(CNR_CLEN | CNR_CLIN | CNR_AIM | CNR_SIM) +- u32 ldr; /* load register */ +- u32 psr; /* prescale register */ +- u32 ctr; /* register */ +- u32 evr; /* event register */ +-#define RTEVR_SIF 0x00000001 /* Second Interrupt Flag Bit */ +-#define RTEVR_AIF 0x00000002 /* Alarm Interrupt Flag Bit */ +-#define RTEVR_RES ~(EVR_SIF | EVR_AIF) +- u32 alr; /* alarm register */ ++typedef struct rtclk83xx { ++ u32 cnr; /* control register */ ++#define CNR_CLEN 0x00000080 /* Clock Enable Control Bit */ ++#define CNR_CLIN 0x00000040 /* Input Clock Control Bit */ ++#define CNR_AIM 0x00000002 /* Alarm Interrupt Mask Bit */ ++#define CNR_SIM 0x00000001 /* Second Interrupt Mask Bit */ ++#define CNR_RES ~(CNR_CLEN | CNR_CLIN | CNR_AIM | CNR_SIM) ++ u32 ldr; /* load register */ ++#define LDR_CLDV 0xFFFFFFFF /* Contains the 32-bit value to be ++ * loaded in a 32-bit RTC counter.*/ ++ u32 psr; /* prescale register */ ++#define PSR_PRSC 0xFFFFFFFF /* RTC Prescaler bits. */ ++ u32 ctr; /* Counter value field register */ ++#define CRT_CNTV 0xFFFFFFFF /* RTC Counter value field. */ ++ u32 evr; /* event register */ ++#define RTEVR_SIF 0x00000001 /* Second Interrupt Flag Bit */ ++#define RTEVR_AIF 0x00000002 /* Alarm Interrupt Flag Bit */ ++#define RTEVR_RES ~(RTEVR_SIF | RTEVR_AIF) ++#define PTEVR_PIF 0x00000001 /* Periodic interrupt flag bit. */ ++#define PTEVR_RES ~(PTEVR_PIF) ++ u32 alr; /* alarm register */ + u8 res0[0xE8]; +-} rtclk8349_t; ++} rtclk83xx_t; + + /* + * Global timper module + */ + +-typedef struct gtm8349 { +- u8 cfr1; /* Timer1/2 Configuration */ +-#define CFR1_PCAS 0x80 /* Pair Cascade mode */ +-#define CFR1_BCM 0x40 /* Backward compatible mode */ +-#define CFR1_STP2 0x20 /* Stop timer */ +-#define CFR1_RST2 0x10 /* Reset timer */ +-#define CFR1_GM2 0x08 /* Gate mode for pin 2 */ +-#define CFR1_GM1 0x04 /* Gate mode for pin 1 */ +-#define CFR1_STP1 0x02 /* Stop timer */ +-#define CFR1_RST1 0x01 /* Reset timer */ +- u8 res0[3]; +- u8 cfr2; /* Timer3/4 Configuration */ +-#define CFR2_PCAS 0x80 /* Pair Cascade mode */ +-#define CFR2_SCAS 0x40 /* Super Cascade mode */ +-#define CFR2_STP4 0x20 /* Stop timer */ +-#define CFR2_RST4 0x10 /* Reset timer */ +-#define CFR2_GM4 0x08 /* Gate mode for pin 4 */ +-#define CFR2_GM3 0x04 /* Gate mode for pin 3 */ +-#define CFR2_STP3 0x02 /* Stop timer */ +-#define CFR2_RST3 0x01 /* Reset timer */ +- u8 res1[10]; +- u16 mdr1; /* Timer1 Mode Register */ +-#define MDR_SPS 0xff00 /* Secondary Prescaler value */ +-#define MDR_CE 0x00c0 /* Capture edge and enable interrupt */ +-#define MDR_OM 0x0020 /* Output mode */ +-#define MDR_ORI 0x0010 /* Output reference interrupt enable */ +-#define MDR_FRR 0x0008 /* Free run/restart */ +-#define MDR_ICLK 0x0006 /* Input clock source for the timer */ +-#define MDR_GE 0x0001 /* Gate enable */ +- u16 mdr2; /* Timer2 Mode Register */ +- u16 rfr1; /* Timer1 Reference Register */ +- u16 rfr2; /* Timer2 Reference Register */ +- u16 cpr1; /* Timer1 Capture Register */ +- u16 cpr2; /* Timer2 Capture Register */ +- u16 cnr1; /* Timer1 Counter Register */ +- u16 cnr2; /* Timer2 Counter Register */ +- u16 mdr3; /* Timer3 Mode Register */ +- u16 mdr4; /* Timer4 Mode Register */ +- u16 rfr3; /* Timer3 Reference Register */ +- u16 rfr4; /* Timer4 Reference Register */ +- u16 cpr3; /* Timer3 Capture Register */ +- u16 cpr4; /* Timer4 Capture Register */ +- u16 cnr3; /* Timer3 Counter Register */ +- u16 cnr4; /* Timer4 Counter Register */ +- u16 evr1; /* Timer1 Event Register */ +- u16 evr2; /* Timer2 Event Register */ +- u16 evr3; /* Timer3 Event Register */ +- u16 evr4; /* Timer4 Event Register */ +-#define GTEVR_REF 0x0002 /* Output reference event */ +-#define GTEVR_CAP 0x0001 /* Counter Capture event */ ++typedef struct gtm83xx { ++ u8 cfr1; /* Timer1/2 Configuration */ ++#define CFR1_PCAS 0x80 /* Pair Cascade mode */ ++#define CFR1_BCM 0x40 /* Backward compatible mode */ ++#define CFR1_STP2 0x20 /* Stop timer */ ++#define CFR1_RST2 0x10 /* Reset timer */ ++#define CFR1_GM2 0x08 /* Gate mode for pin 2 */ ++#define CFR1_GM1 0x04 /* Gate mode for pin 1 */ ++#define CFR1_STP1 0x02 /* Stop timer */ ++#define CFR1_RST1 0x01 /* Reset timer */ ++#define CFR1_RES ~(CFR1_PCAS | CFR1_STP2 | CFR1_RST2 | CFR1_GM2 |\ ++ CFR1_GM1 | CFR1_STP1 | CFR1_RST1) ++ u8 res0[3]; ++ u8 cfr2; /* Timer3/4 Configuration */ ++#define CFR2_PCAS 0x80 /* Pair Cascade mode */ ++#define CFR2_SCAS 0x40 /* Super Cascade mode */ ++#define CFR2_STP4 0x20 /* Stop timer */ ++#define CFR2_RST4 0x10 /* Reset timer */ ++#define CFR2_GM4 0x08 /* Gate mode for pin 4 */ ++#define CFR2_GM3 0x04 /* Gate mode for pin 3 */ ++#define CFR2_STP3 0x02 /* Stop timer */ ++#define CFR2_RST3 0x01 /* Reset timer */ ++ u8 res1[10]; ++ u16 mdr1; /* Timer1 Mode Register */ ++#define MDR_SPS 0xff00 /* Secondary Prescaler value */ ++#define MDR_CE 0x00c0 /* Capture edge and enable interrupt */ ++#define MDR_OM 0x0020 /* Output mode */ ++#define MDR_ORI 0x0010 /* Output reference interrupt enable */ ++#define MDR_FRR 0x0008 /* Free run/restart */ ++#define MDR_ICLK 0x0006 /* Input clock source for the timer */ ++#define MDR_GE 0x0001 /* Gate enable */ ++ u16 mdr2; /* Timer2 Mode Register */ ++ u16 rfr1; /* Timer1 Reference Register */ ++ u16 rfr2; /* Timer2 Reference Register */ ++ u16 cpr1; /* Timer1 Capture Register */ ++ u16 cpr2; /* Timer2 Capture Register */ ++ u16 cnr1; /* Timer1 Counter Register */ ++ u16 cnr2; /* Timer2 Counter Register */ ++ u16 mdr3; /* Timer3 Mode Register */ ++ u16 mdr4; /* Timer4 Mode Register */ ++ u16 rfr3; /* Timer3 Reference Register */ ++ u16 rfr4; /* Timer4 Reference Register */ ++ u16 cpr3; /* Timer3 Capture Register */ ++ u16 cpr4; /* Timer4 Capture Register */ ++ u16 cnr3; /* Timer3 Counter Register */ ++ u16 cnr4; /* Timer4 Counter Register */ ++ u16 evr1; /* Timer1 Event Register */ ++ u16 evr2; /* Timer2 Event Register */ ++ u16 evr3; /* Timer3 Event Register */ ++ u16 evr4; /* Timer4 Event Register */ ++#define GTEVR_REF 0x0002 /* Output reference event */ ++#define GTEVR_CAP 0x0001 /* Counter Capture event */ + #define GTEVR_RES ~(EVR_CAP|EVR_REF) +- u16 psr1; /* Timer1 Prescaler Register */ +- u16 psr2; /* Timer2 Prescaler Register */ +- u16 psr3; /* Timer3 Prescaler Register */ +- u16 psr4; /* Timer4 Prescaler Register */ +- u8 res[0xC0]; +-} gtm8349_t; ++ u16 psr1; /* Timer1 Prescaler Register */ ++ u16 psr2; /* Timer2 Prescaler Register */ ++ u16 psr3; /* Timer3 Prescaler Register */ ++ u16 psr4; /* Timer4 Prescaler Register */ ++#define GTPSR_PPS 0x00FF /* Primary Prescaler Bits. */ ++#define GTPSR_RES ~(GTPSR_PPS) ++ u8 res[0xC0]; ++} gtm83xx_t; + + /* + * Integrated Programmable Interrupt Controller + */ +-typedef struct ipic8349 { +- u32 sicfr; /* System Global Interrupt Configuration Register (SICFR) */ +-#define SICFR_HPI 0x7f000000 /* Highest Priority Interrupt */ +-#define SICFR_MPSB 0x00400000 /* Mixed interrupts Priority Scheme for group B */ +-#define SICFR_MPSA 0x00200000 /* Mixed interrupts Priority Scheme for group A */ +-#define SICFR_IPSD 0x00080000 /* Internal interrupts Priority Scheme for group D */ +-#define SICFR_IPSA 0x00010000 /* Internal interrupts Priority Scheme for group A */ +-#define SICFR_HPIT 0x00000300 /* HPI priority position IPIC output interrupt Type */ ++typedef struct ipic83xx { ++ u32 sicfr; /* System Global Interrupt Configuration Register (SICFR) */ ++#define SICFR_HPI 0x7f000000 /* Highest Priority Interrupt */ ++#define SICFR_MPSB 0x00400000 /* Mixed interrupts Priority Scheme for group B */ ++#define SICFR_MPSA 0x00200000 /* Mixed interrupts Priority Scheme for group A */ ++#define SICFR_IPSD 0x00080000 /* Internal interrupts Priority Scheme for group D */ ++#define SICFR_IPSA 0x00010000 /* Internal interrupts Priority Scheme for group A */ ++#define SICFR_HPIT 0x00000300 /* HPI priority position IPIC output interrupt Type */ + #define SICFR_RES ~(SICFR_HPI|SICFR_MPSB|SICFR_MPSA|SICFR_IPSD|SICFR_IPSA|SICFR_HPIT) +- u32 sivcr; /* System Global Interrupt Vector Register (SIVCR) */ +-#define SICVR_IVECX 0xfc000000 /* Interrupt vector (for CE compatibility purpose only not used in 8349 IPIC implementation) */ +-#define SICVR_IVEC 0x0000007f /* Interrupt vector */ ++ u32 sivcr; /* System Global Interrupt Vector Register (SIVCR) */ ++#define SICVR_IVECX 0xfc000000 /* Interrupt vector (for CE compatibility purpose only not used in 8349 IPIC implementation) */ ++#define SICVR_IVEC 0x0000007f /* Interrupt vector */ + #define SICVR_RES ~(SICVR_IVECX|SICVR_IVEC) +- u32 sipnr_h; /* System Internal Interrupt Pending Register - High (SIPNR_H) */ +-#define SIIH_TSEC1TX 0x80000000 /* TSEC1 Tx interrupt */ +-#define SIIH_TSEC1RX 0x40000000 /* TSEC1 Rx interrupt */ ++ u32 sipnr_h; /* System Internal Interrupt Pending Register - High (SIPNR_H) */ ++#if defined (CONFIG_MPC8349) ++#define SIIH_TSEC1TX 0x80000000 /* TSEC1 Tx interrupt */ ++#define SIIH_TSEC1RX 0x40000000 /* TSEC1 Rx interrupt */ + #define SIIH_TSEC1ER 0x20000000 /* TSEC1 Eror interrupt */ +-#define SIIH_TSEC2TX 0x10000000 /* TSEC2 Tx interrupt */ +-#define SIIH_TSEC2RX 0x08000000 /* TSEC2 Rx interrupt */ ++#define SIIH_TSEC2TX 0x10000000 /* TSEC2 Tx interrupt */ ++#define SIIH_TSEC2RX 0x08000000 /* TSEC2 Rx interrupt */ + #define SIIH_TSEC2ER 0x04000000 /* TSEC2 Eror interrupt */ + #define SIIH_USB2DR 0x02000000 /* USB2 DR interrupt */ +-#define SIIH_USB2MPH 0x01000000 /* USB2 MPH interrupt */ ++#define SIIH_USB2MPH 0x01000000 /* USB2 MPH interrupt */ ++#endif ++#if defined (CONFIG_MPC8360) ++#define SIIH_H_QE_H 0x80000000 /* QE high interrupt */ ++#define SIIH_H_QE_L 0x40000000 /* QE low interrupt */ ++#endif + #define SIIH_UART1 0x00000080 /* UART1 interrupt */ + #define SIIH_UART2 0x00000040 /* UART2 interrupt */ + #define SIIH_SEC 0x00000020 /* SEC interrupt */ + #define SIIH_I2C1 0x00000004 /* I2C1 interrupt */ +-#define SIIH_I2C2 0x00000002 /* I2C1 interrupt */ ++#define SIIH_I2C2 0x00000002 /* I2C2 interrupt */ ++#if defined (CONFIG_MPC8349) + #define SIIH_SPI 0x00000001 /* SPI interrupt */ + #define SIIH_RES ~(SIIH_TSEC1TX | SIIH_TSEC1RX | SIIH_TSEC1ER \ + | SIIH_TSEC2TX | SIIH_TSEC2RX | SIIH_TSEC2ER \ + | SIIH_USB2DR | SIIH_USB2MPH | SIIH_UART1 \ + | SIIH_UART2 | SIIH_SEC | SIIH_I2C1 \ + | SIIH_I2C2 | SIIH_SPI) +- u32 sipnr_l; /* System Internal Interrupt Pending Register - Low (SIPNR_L) */ +-#define SIIL_RTCS 0x80000000 /* RTC SECOND interrupt */ +-#define SIIL_PIT 0x40000000 /* PIT interrupt */ +-#define SIIL_PCI1 0x20000000 /* PCI1 interrupt */ +-#define SIIL_PCI2 0x10000000 /* PCI2 interrupt */ +-#define SIIL_RTCA 0x08000000 /* RTC ALARM interrupt */ +-#define SIIL_MU 0x04000000 /* Message Unit interrupt */ +-#define SIIL_SBA 0x02000000 /* System Bus Arbiter interrupt */ +-#define SIIL_DMA 0x01000000 /* DMA interrupt */ +-#define SIIL_GTM4 0x00800000 /* GTM4 interrupt */ +-#define SIIL_GTM8 0x00400000 /* GTM8 interrupt */ +-#define SIIL_GPIO1 0x00200000 /* GPIO1 interrupt */ +-#define SIIL_GPIO2 0x00100000 /* GPIO2 interrupt */ +-#define SIIL_DDR 0x00080000 /* DDR interrupt */ +-#define SIIL_LBC 0x00040000 /* LBC interrupt */ +-#define SIIL_GTM2 0x00020000 /* GTM2 interrupt */ +-#define SIIL_GTM6 0x00010000 /* GTM6 interrupt */ +-#define SIIL_PMC 0x00008000 /* PMC interrupt */ +-#define SIIL_GTM3 0x00000800 /* GTM3 interrupt */ +-#define SIIL_GTM7 0x00000400 /* GTM7 interrupt */ +-#define SIIL_GTM1 0x00000020 /* GTM1 interrupt */ +-#define SIIL_GTM5 0x00000010 /* GTM5 interrupt */ +-#define SIIL_DPTC 0x00000001 /* DPTC interrupt (!!! Invisible for user !!!) */ ++#endif ++#if defined (CONFIG_MPC8360) ++#define SIIH_RES ~(SIIH_H_QE_H | SIIH_H_QE_L | SIIH_H_UART1 | \ ++ SIIH_H_UART2| SIIH_H_SEC | SIIH_H_I2C1 |SIIH_H_I2C2) ++#endif ++ u32 sipnr_l; /* System Internal Interrupt Pending Register - Low (SIPNR_L) */ ++#define SIIL_RTCS 0x80000000 /* RTC SECOND interrupt */ ++#define SIIL_PIT 0x40000000 /* PIT interrupt */ ++#define SIIL_PCI1 0x20000000 /* PCI1 interrupt */ ++#if defined (CONFIG_MPC8349) ++#define SIIL_PCI2 0x10000000 /* PCI2 interrupt */ ++#endif ++#define SIIL_RTCA 0x08000000 /* RTC ALARM interrupt */ ++#define SIIL_MU 0x04000000 /* Message Unit interrupt */ ++#define SIIL_SBA 0x02000000 /* System Bus Arbiter interrupt */ ++#define SIIL_DMA 0x01000000 /* DMA interrupt */ ++#define SIIL_GTM4 0x00800000 /* GTM4 interrupt */ ++#define SIIL_GTM8 0x00400000 /* GTM8 interrupt */ ++#if defined (CONFIG_MPC8349) ++#define SIIL_GPIO1 0x00200000 /* GPIO1 interrupt */ ++#define SIIL_GPIO2 0x00100000 /* GPIO2 interrupt */ ++#endif ++#if defined (CONFIG_MPC8360) ++#define SIIL_QEP 0x00200000 /* QE ports interrupt */ ++#define SIIL_SDDR 0x00100000 /* SDDR interrupt */ ++#endif ++#define SIIL_DDR 0x00080000 /* DDR interrupt */ ++#define SIIL_LBC 0x00040000 /* LBC interrupt */ ++#define SIIL_GTM2 0x00020000 /* GTM2 interrupt */ ++#define SIIL_GTM6 0x00010000 /* GTM6 interrupt */ ++#define SIIL_PMC 0x00008000 /* PMC interrupt */ ++#define SIIL_GTM3 0x00000800 /* GTM3 interrupt */ ++#define SIIL_GTM7 0x00000400 /* GTM7 interrupt */ ++#define SIIL_GTM1 0x00000020 /* GTM1 interrupt */ ++#define SIIL_GTM5 0x00000010 /* GTM5 interrupt */ ++#define SIIL_DPTC 0x00000001 /* DPTC interrupt (!!! Invisible for user !!!) */ ++#if defined (CONFIG_MPC8349) + #define SIIL_RES ~(SIIL_RTCS | SIIL_PIT | SIIL_PCI1 | SIIL_PCI2 \ + | SIIL_RTCA | SIIL_MU | SIIL_SBA | SIIL_DMA \ + | SIIL_GTM4 | SIIL_GTM8 | SIIL_GPIO1 | SIIL_GPIO2 \ + | SIIL_DDR | SIIL_LBC | SIIL_GTM2 | SIIL_GTM6 \ + | SIIL_PMC |SIIL_GTM3 | SIIL_GTM7 | SIIL_GTM1 \ + | SIIL_GTM5 |SIIL_DPTC ) +- u32 siprr_a; /* System Internal Interrupt Group A Priority Register (PRR) */ +- u8 res0[8]; +- u32 siprr_d; /* System Internal Interrupt Group D Priority Register (PRR) */ +- u32 simsr_h; /* System Internal Interrupt Mask Register - High (SIIH) */ +- u32 simsr_l; /* System Internal Interrupt Mask Register - Low (SIIL) */ +- u8 res1[4]; +- u32 sepnr; /* System External Interrupt Pending Register (SEI) */ +- u32 smprr_a; /* System Mixed Interrupt Group A Priority Register (PRR) */ +- u32 smprr_b; /* System Mixed Interrupt Group B Priority Register (PRR) */ +-#define PRR_0 0xe0000000 /* Priority Register, Position 0 programming */ +-#define PRR_1 0x1c000000 /* Priority Register, Position 1 programming */ +-#define PRR_2 0x03800000 /* Priority Register, Position 2 programming */ +-#define PRR_3 0x00700000 /* Priority Register, Position 3 programming */ +-#define PRR_4 0x0000e000 /* Priority Register, Position 4 programming */ +-#define PRR_5 0x00001c00 /* Priority Register, Position 5 programming */ +-#define PRR_6 0x00000380 /* Priority Register, Position 6 programming */ +-#define PRR_7 0x00000070 /* Priority Register, Position 7 programming */ ++#endif ++#if defined (CONFIG_MPC8360) ++#define SIIL_RES ~(SIIL_RTCS |SIIL_PIT |SIIL_PCI1 |SIIL_RTCALR \ ++ |SIIL_MU |SIIL_SBA |SIIL_DMA |SIIL_GTM4 |SIIL_GTM8 \ ++ |SIIL_QEP | SIIL_SDDR| SIIL_DDR |SIIL_LBC |SIIL_GTM2 \ ++ |SIIL_GTM6 |SIIL_PMC |SIIL_GTM3 |SIIL_GTM7 |SIIL_GTM1 \ ++ |SIIL_GTM5 ) ++#endif ++ u32 siprr_a; /* System Internal Interrupt Group A Priority Register (PRR) */ ++ u8 res0[8]; ++ u32 siprr_d; /* System Internal Interrupt Group D Priority Register (PRR) */ ++ u32 simsr_h; /* System Internal Interrupt Mask Register - High (SIIH) */ ++ u32 simsr_l; /* System Internal Interrupt Mask Register - Low (SIIL) */ ++ u8 res1[4]; ++ u32 sepnr; /* System External Interrupt Pending Register (SEI) */ ++ u32 smprr_a; /* System Mixed Interrupt Group A Priority Register (PRR) */ ++ u32 smprr_b; /* System Mixed Interrupt Group B Priority Register (PRR) */ ++#define PRR_0 0xe0000000 /* Priority Register, Position 0 programming */ ++#define PRR_1 0x1c000000 /* Priority Register, Position 1 programming */ ++#define PRR_2 0x03800000 /* Priority Register, Position 2 programming */ ++#define PRR_3 0x00700000 /* Priority Register, Position 3 programming */ ++#define PRR_4 0x0000e000 /* Priority Register, Position 4 programming */ ++#define PRR_5 0x00001c00 /* Priority Register, Position 5 programming */ ++#define PRR_6 0x00000380 /* Priority Register, Position 6 programming */ ++#define PRR_7 0x00000070 /* Priority Register, Position 7 programming */ + #define PRR_RES ~(PRR_0|PRR_1|PRR_2|PRR_3|PRR_4|PRR_5|PRR_6|PRR_7) +- u32 semsr; /* System External Interrupt Mask Register (SEI) */ +-#define SEI_IRQ0 0x80000000 /* IRQ0 external interrupt */ +-#define SEI_IRQ1 0x40000000 /* IRQ1 external interrupt */ +-#define SEI_IRQ2 0x20000000 /* IRQ2 external interrupt */ +-#define SEI_IRQ3 0x10000000 /* IRQ3 external interrupt */ +-#define SEI_IRQ4 0x08000000 /* IRQ4 external interrupt */ +-#define SEI_IRQ5 0x04000000 /* IRQ5 external interrupt */ +-#define SEI_IRQ6 0x02000000 /* IRQ6 external interrupt */ +-#define SEI_IRQ7 0x01000000 /* IRQ7 external interrupt */ +-#define SEI_SIRQ0 0x00008000 /* SIRQ0 external interrupt */ ++ u32 semsr; /* System External Interrupt Mask Register (SEI) */ ++#define SEI_IRQ0 0x80000000 /* IRQ0 external interrupt */ ++#define SEI_IRQ1 0x40000000 /* IRQ1 external interrupt */ ++#define SEI_IRQ2 0x20000000 /* IRQ2 external interrupt */ ++#define SEI_IRQ3 0x10000000 /* IRQ3 external interrupt */ ++#define SEI_IRQ4 0x08000000 /* IRQ4 external interrupt */ ++#define SEI_IRQ5 0x04000000 /* IRQ5 external interrupt */ ++#define SEI_IRQ6 0x02000000 /* IRQ6 external interrupt */ ++#define SEI_IRQ7 0x01000000 /* IRQ7 external interrupt */ ++#define SEI_SIRQ0 0x00008000 /* SIRQ0 external interrupt */ + #define SEI_RES ~( SEI_IRQ0 | SEI_IRQ1 | SEI_IRQ2 | SEI_IRQ3 \ + | SEI_IRQ4 | SEI_IRQ5 | SEI_IRQ6 | SEI_IRQ7 \ + | SEI_SIRQ0) +- u32 secnr; /* System External Interrupt Control Register (SECNR) */ +-#define SECNR_MIXB0T 0xc0000000 /* MIXB0 priority position IPIC output interrupt type */ +-#define SECNR_MIXB1T 0x30000000 /* MIXB1 priority position IPIC output interrupt type */ +-#define SECNR_MIXA0T 0x00c00000 /* MIXA0 priority position IPIC output interrupt type */ +-#define SECNR_SYSA1T 0x00300000 /* MIXA1 priority position IPIC output interrupt type */ ++ u32 secnr; /* System External Interrupt Control Register (SECNR) */ ++#define SECNR_MIXB0T 0xc0000000 /* MIXB0 priority position IPIC output interrupt type */ ++#define SECNR_MIXB1T 0x30000000 /* MIXB1 priority position IPIC output interrupt type */ ++#define SECNR_MIXA0T 0x00c00000 /* MIXA0 priority position IPIC output interrupt type */ ++#define SECNR_SYSA1T 0x00300000 /* MIXA1 priority position IPIC output interrupt type */ + #define SECNR_EDI0 0x00008000 /* IRQ0 external interrupt edge/level detect */ + #define SECNR_EDI1 0x00004000 /* IRQ1 external interrupt edge/level detect */ + #define SECNR_EDI2 0x00002000 /* IRQ2 external interrupt edge/level detect */ +@@ -339,176 +439,238 @@ typedef struct ipic8349 { + | SECNR_SYSA1T | SECNR_EDI0 | SECNR_EDI1 \ + | SECNR_EDI2 | SECNR_EDI3 | SECNR_EDI4 \ + | SECNR_EDI5 | SECNR_EDI6 | SECNR_EDI7) +- u32 sersr; /* System Error Status Register (SERR) */ +- u32 sermr; /* System Error Mask Register (SERR) */ +-#define SERR_IRQ0 0x80000000 /* IRQ0 MCP request */ +-#define SERR_WDT 0x40000000 /* WDT MCP request */ +-#define SERR_SBA 0x20000000 /* SBA MCP request */ +-#define SERR_DDR 0x10000000 /* DDR MCP request */ +-#define SERR_LBC 0x08000000 /* LBC MCP request */ +-#define SERR_PCI1 0x04000000 /* PCI1 MCP request */ +-#define SERR_PCI2 0x02000000 /* PCI2 MCP request */ +-#define SERR_MU 0x01000000 /* MU MCP request */ +-#define SERR_RNC 0x00010000 /* MU MCP request (!!! Non-visible for users !!!) */ ++ u32 sersr; /* System Error Status Register (SERR) */ ++ u32 sermr; /* System Error Mask Register (SERR) */ ++#define SERR_IRQ0 0x80000000 /* IRQ0 MCP request */ ++#define SERR_WDT 0x40000000 /* WDT MCP request */ ++#define SERR_SBA 0x20000000 /* SBA MCP request */ ++#if defined (CONFIG_MPC8349) ++#define SERR_DDR 0x10000000 /* DDR MCP request */ ++#define SERR_LBC 0x08000000 /* LBC MCP request */ ++#define SERR_PCI1 0x04000000 /* PCI1 MCP request */ ++#define SERR_PCI2 0x02000000 /* PCI2 MCP request */ ++#endif ++#if defined (CONFIG_MPC8360) ++#define SERR_CIEE 0x10000000 /* CIEE MCP request */ ++#define SERR_CMEE 0x08000000 /* CMEEMCP request */ ++#define SERR_PCI 0x04000000 /* PCI MCP request */ ++#endif ++#define SERR_MU 0x01000000 /* MU MCP request */ ++#define SERR_RNC 0x00010000 /* MU MCP request (!!! Non-visible for users !!!) */ ++#if defined (CONFIG_MPC8349) + #define SERR_RES ~( SERR_IRQ0 | SERR_WDT | SERR_SBA | SERR_DDR \ + |SERR_LBC | SERR_PCI1 | SERR_PCI2 | SERR_MU \ + |SERR_RNC ) +- u32 sercr; /* System Error Control Register (SERCR) */ +-#define SERCR_MCPR 0x00000001 /* MCP Route */ ++#elif defined (CONFIG_MPC8360) ++#define SERR_RES ~( SERR_IRQ0|SERR_WDT |SERR_SBA |SERR_CIEE\ ++ |SERR_CMEE|SERR_PCI|SERR_MU) ++#endif ++ u32 sercr; /* System Error Control Register (SERCR) */ ++#define SERCR_MCPR 0x00000001 /* MCP Route */ + #define SERCR_RES ~(SERCR_MCPR) +- u8 res2[4]; +- u32 sifcr_h; /* System Internal Interrupt Force Register - High (SIIH) */ +- u32 sifcr_l; /* System Internal Interrupt Force Register - Low (SIIL) */ +- u32 sefcr; /* System External Interrupt Force Register (SEI) */ +- u32 serfr; /* System Error Force Register (SERR) */ +- u8 res3[0xA0]; +-} ipic8349_t; ++ u8 res2[4]; ++ u32 sifcr_h; /* System Internal Interrupt Force Register - High (SIIH) */ ++ u32 sifcr_l; /* System Internal Interrupt Force Register - Low (SIIL) */ ++ u32 sefcr; /* System External Interrupt Force Register (SEI) */ ++ u32 serfr; /* System Error Force Register (SERR) */ ++ u32 scvcr; /* System Critical Interrupt Vector Register */ ++#define SCVCR_CVECX 0xFC000000 /* Backward (MPC8260) compatible ++ critical interrupt vector. */ ++#define SCVCR_CVEC 0x0000007F /* Critical interrupt vector */ ++#define SCVCR_RES ~(SCVCR_CVECX|SCVCR_CVEC) ++ u32 smvcr; /* System Management Interrupt Vector Register */ ++#define SMVCR_CVECX 0xFC000000 /* Backward (MPC8260) compatible ++ critical interrupt vector. */ ++#define SMVCR_CVEC 0x0000007F /* Critical interrupt vector */ ++#define SMVCR_RES ~(SMVCR_CVECX|SMVCR_CVEC) ++ u8 res3[0x98]; ++} ipic83xx_t; + + /* + * System Arbiter Registers + */ +-typedef struct arbiter8349 { +- u32 acr; /* Arbiter Configuration Register */ +-#define ACR_COREDIS 0x10000000 /* Core disable. */ +-#define ACR_PIPE_DEP 0x00070000 /* Pipeline depth (number of outstanding transactions). */ +-#define ACR_PCI_RPTCNT 0x00007000 /* PCI repeat count. */ +-#define ACR_RPTCNT 0x00000700 /* Repeat count. */ +-#define ACR_APARK 0x00000030 /* Address parking. */ +-#define ACR_PARKM 0x0000000F /* Parking master. */ ++typedef struct arbiter83xx { ++ u32 acr; /* Arbiter Configuration Register */ ++#define ACR_COREDIS 0x10000000 /* Core disable. */ ++#define ACR_COREDIS_SHIFT (31-7) ++#define ACR_PIPE_DEP 0x00070000 /* Pipeline depth (number of outstanding transactions). */ ++#define ACR_PIPE_DEP_SHIFT (31-15) ++#define ACR_PCI_RPTCNT 0x00007000 /* PCI repeat count. */ ++#define ACR_PCI_RPTCNT_SHIFT (31-19) ++#define ACR_RPTCNT 0x00000700 /* Repeat count. */ ++#define ACR_RPTCNT_SHIFT (31-23) ++#define ACR_APARK 0x00000030 /* Address parking. */ ++#define ACR_APARK_SHIFT (31-27) ++#define ACR_PARKM 0x0000000F /* Parking master. */ ++#define ACR_PARKM_SHIFT (31-31) + #define ACR_RES ~(ACR_COREDIS|ACR_PIPE_DEP|ACR_PCI_RPTCNT|ACR_RPTCNT|ACR_APARK|ACR_PARKM) +- u32 atr; /* Arbiter Timers Register */ +-#define ATR_DTO 0x00FF0000 /* Data time out. */ +-#define ATR_ATO 0x000000FF /* Address time out. */ ++ u32 atr; /* Arbiter Timers Register */ ++#define ATR_DTO 0x00FF0000 /* Data time out. */ ++#define ATR_ATO 0x000000FF /* Address time out. */ + #define ATR_RES ~(ATR_DTO|ATR_ATO) + u8 res[4]; +- u32 aer; /* Arbiter Event Register (AE)*/ +- u32 aidr; /* Arbiter Interrupt Definition Register (AE) */ +- u32 amr; /* Arbiter Mask Register (AE) */ +- u32 aeatr; /* Arbiter Event Attributes Register */ +-#define AEATR_EVENT 0x07000000 /* Event type. */ +-#define AEATR_MSTR_ID 0x001F0000 /* Master Id. */ +-#define AEATR_TBST 0x00000800 /* Transfer burst. */ +-#define AEATR_TSIZE 0x00000700 /* Transfer Size. */ +-#define AEATR_TTYPE 0x0000001F /* Transfer Type. */ ++ u32 aer; /* Arbiter Event Register (AE) */ ++ u32 aidr; /* Arbiter Interrupt Definition Register (AE) */ ++ u32 amr; /* Arbiter Mask Register (AE) */ ++ u32 aeatr; /* Arbiter Event Attributes Register */ ++#define AEATR_EVENT 0x07000000 /* Event type. */ ++#define AEATR_MSTR_ID 0x001F0000 /* Master Id. */ ++#define AEATR_TBST 0x00000800 /* Transfer burst. */ ++#define AEATR_TSIZE 0x00000700 /* Transfer Size. */ ++#define AEATR_TTYPE 0x0000001F /* Transfer Type. */ + #define AEATR_RES ~(AEATR_EVENT|AEATR_MSTR_ID|AEATR_TBST|AEATR_TSIZE|AEATR_TTYPE) +- u32 aeadr; /* Arbiter Event Address Register */ +- u32 aerr; /* Arbiter Event Response Register (AE)*/ +-#define AE_ETEA 0x00000020 /* Transfer error. */ +-#define AE_RES_ 0x00000010 /* Reserved transfer type. */ +-#define AE_ECW 0x00000008 /* External control word transfer type. */ +-#define AE_AO 0x00000004 /* Address Only transfer type. */ +-#define AE_DTO 0x00000002 /* Data time out. */ +-#define AE_ATO 0x00000001 /* Address time out. */ ++ u32 aeadr; /* Arbiter Event Address Register */ ++ u32 aerr; /* Arbiter Event Response Register (AE) */ ++#define AE_ETEA 0x00000020 /* Transfer error. */ ++#define AE_RES_ 0x00000010 /* Reserved transfer type. */ ++#define AE_ECW 0x00000008 /* External control word transfer type. */ ++#define AE_AO 0x00000004 /* Address Only transfer type. */ ++#define AE_DTO 0x00000002 /* Data time out. */ ++#define AE_ATO 0x00000001 /* Address time out. */ + #define AE_RSRV ~(AE_ETEA|AE_RES_|AE_ECW|AE_AO|AE_DTO|AE_ATO) + u8 res1[0xDC]; +-} arbiter8349_t; ++} arbiter83xx_t; + + /* + * Reset Module + */ +-typedef struct reset8349 { +- u32 rcwl; /* RCWL Register */ ++typedef struct reset83xx { ++ u32 rcwl; /* RCWL Register */ + #define RCWL_LBIUCM 0x80000000 /* LBIUCM */ + #define RCWL_LBIUCM_SHIFT 31 + #define RCWL_DDRCM 0x40000000 /* DDRCM */ + #define RCWL_DDRCM_SHIFT 30 ++#if defined (CONFIG_MPC8349) + #define RCWL_SVCOD 0x30000000 /* SVCOD */ +-#define RCWL_SPMF 0x0f000000 /* SPMF */ +-#define RCWL_SPMF_SHIFT 24 ++#endif ++#define RCWL_SPMF 0x0f000000 /* SPMF */ ++#define RCWL_SPMF_SHIFT 24 + #define RCWL_COREPLL 0x007F0000 /* COREPLL */ + #define RCWL_COREPLL_SHIFT 16 + #define RCWL_CEVCOD 0x000000C0 /* CEVCOD */ + #define RCWL_CEPDF 0x00000020 /* CEPDF */ ++#define RCWL_CEPDF_SHIFT 5 + #define RCWL_CEPMF 0x0000001F /* CEPMF */ +-#define RCWL_RES ~(RCWL_BIUCM|RCWL_DDRCM|RCWL_SVCOD|RCWL_SPMF|RCWL_COREPLL|RCWL_CEVCOD|RCWL_CEPDF|RCWL_CEPMF) +- u32 rcwh; /* RCHL Register */ ++#define RCWL_CEPMF_SHIFT 0 ++#if defined (CONFIG_MPC8349) ++#define RCWL_RES ~(RCWL_LBIUCM|RCWL_DDRCM|RCWL_SVCOD|RCWL_SPMF|RCWL_COREPLL|RCWL_CEVCOD|RCWL_CEPDF|RCWL_CEPMF) ++#elif defined (CONFIG_MPC8360) ++#define RCWL_RES ~(RCWL_LBIUCM|RCWL_DDRCM|RCWL_SPMF|RCWL_COREPLL|RCWL_CEPDF|RCWL_CEPMF) ++#endif ++ u32 rcwh; /* RCHL Register */ + #define RCWH_PCIHOST 0x80000000 /* PCIHOST */ + #define RCWH_PCIHOST_SHIFT 31 ++#if defined (CONFIG_MPC8349) + #define RCWH_PCI64 0x40000000 /* PCI64 */ + #define RCWH_PCI1ARB 0x20000000 /* PCI1ARB */ + #define RCWH_PCI2ARB 0x10000000 /* PCI2ARB */ ++#elif defined (CONFIG_MPC8360) ++#define RCWH_PCIARB 0x20000000 /* PCI internal arbiter mode. */ ++#define RCWH_PCICKDRV 0x10000000 /* PCI clock output drive. */ ++#endif + #define RCWH_COREDIS 0x08000000 /* COREDIS */ +-#define RCWH_BMS 0x04000000 /* BMS */ ++#define RCWH_BMS 0x04000000 /* BMS */ + #define RCWH_BOOTSEQ 0x03000000 /* BOOTSEQ */ +-#define RCWH_SWEN 0x00800000 /* SWEN */ ++#define RCWH_SWEN 0x00800000 /* SWEN */ + #define RCWH_ROMLOC 0x00700000 /* ROMLOC */ ++#if defined (CONFIG_MPC8349) + #define RCWH_TSEC1M 0x0000c000 /* TSEC1M */ + #define RCWH_TSEC2M 0x00003000 /* TSEC2M */ +-#define RCWH_TPR 0x00000100 /* TPR */ +-#define RCWH_TLE 0x00000008 /* TLE */ +-#define RCWH_LALE 0x00000004 /* LALE */ ++#define RCWH_TPR 0x00000100 /* TPR */ ++#elif defined (CONFIG_MPC8360) ++#define RCWH_SDDRIOE 0x00000010 /* Secondary DDR IO Enable. */ ++#endif ++#define RCWH_TLE 0x00000008 /* TLE */ ++#define RCWH_LALE 0x00000004 /* LALE */ ++#if defined (CONFIG_MPC8349) + #define RCWH_RES ~(RCWH_PCIHOST | RCWH_PCI64 | RCWH_PCI1ARB \ + | RCWH_PCI2ARB | RCWH_COREDIS | RCWH_BMS \ + | RCWH_BOOTSEQ | RCWH_SWEN | RCWH_ROMLOC \ + | RCWH_TSEC1M | RCWH_TSEC2M | RCWH_TPR \ + | RCWH_TLE | RCWH_LALE) +- u8 res0[8]; +- u32 rsr; /* Reset status Register */ +-#define RSR_RSTSRC 0xE0000000 /* Reset source */ ++#elif defined (CONFIG_MPC8360) ++#define RCWH_RES ~(RCWH_PCIHOST|RCWH_PCIARB|RCWH_PCICKDRV \ ++ |RCWH_COREDIS|RCWH_BMS|RCWH_BOOTSEQ|RCWH_SWEN \ ++ |RCWH_SDDRIOE |RCWH_TLE) ++#endif ++ u8 res0[8]; ++ u32 rsr; /* Reset status Register */ ++#define RSR_RSTSRC 0xE0000000 /* Reset source */ + #define RSR_RSTSRC_SHIFT 29 +-#define RSR_BSF 0x00010000 /* Boot seq. fail */ +-#define RSR_BSF_SHIFT 16 +-#define RSR_SWSR 0x00002000 /* software soft reset */ +-#define RSR_SWSR_SHIFT 13 +-#define RSR_SWHR 0x00001000 /* software hard reset */ +-#define RSR_SWHR_SHIFT 12 +-#define RSR_JHRS 0x00000200 /* jtag hreset */ +-#define RSR_JHRS_SHIFT 9 +-#define RSR_JSRS 0x00000100 /* jtag sreset status */ +-#define RSR_JSRS_SHIFT 8 +-#define RSR_CSHR 0x00000010 /* checkstop reset status */ +-#define RSR_CSHR_SHIFT 4 +-#define RSR_SWRS 0x00000008 /* software watchdog reset status */ +-#define RSR_SWRS_SHIFT 3 +-#define RSR_BMRS 0x00000004 /* bus monitop reset status */ +-#define RSR_BMRS_SHIFT 2 +-#define RSR_SRS 0x00000002 /* soft reset status */ +-#define RSR_SRS_SHIFT 1 +-#define RSR_HRS 0x00000001 /* hard reset status */ +-#define RSR_HRS_SHIFT 0 ++#define RSR_BSF 0x00010000 /* Boot seq. fail */ ++#define RSR_BSF_SHIFT 16 ++#define RSR_SWSR 0x00002000 /* software soft reset */ ++#define RSR_SWSR_SHIFT 13 ++#define RSR_SWHR 0x00001000 /* software hard reset */ ++#define RSR_SWHR_SHIFT 12 ++#define RSR_JHRS 0x00000200 /* jtag hreset */ ++#define RSR_JHRS_SHIFT 9 ++#define RSR_JSRS 0x00000100 /* jtag sreset status */ ++#define RSR_JSRS_SHIFT 8 ++#define RSR_CSHR 0x00000010 /* checkstop reset status */ ++#define RSR_CSHR_SHIFT 4 ++#define RSR_SWRS 0x00000008 /* software watchdog reset status */ ++#define RSR_SWRS_SHIFT 3 ++#define RSR_BMRS 0x00000004 /* bus monitop reset status */ ++#define RSR_BMRS_SHIFT 2 ++#define RSR_SRS 0x00000002 /* soft reset status */ ++#define RSR_SRS_SHIFT 1 ++#define RSR_HRS 0x00000001 /* hard reset status */ ++#define RSR_HRS_SHIFT 0 + #define RSR_RES ~(RSR_RSTSRC | RSR_BSF | RSR_SWSR | RSR_SWHR | RSR_JHRS | RSR_JSRS | RSR_CSHR | RSR_SWRS | RSR_BMRS | RSR_SRS | RSR_HRS) +- u32 rmr; /* Reset mode Register */ +-#define RMR_CSRE 0x00000001 /* checkstop reset enable */ +-#define RMR_CSRE_SHIFT 0 ++ u32 rmr; /* Reset mode Register */ ++#define RMR_CSRE 0x00000001 /* checkstop reset enable */ ++#define RMR_CSRE_SHIFT 0 + #define RMR_RES ~(RMR_CSRE) +- u32 rpr; /* Reset protection Register */ +- u32 rcr; /* Reset Control Register */ +-#define RCR_SWHR 0x00000002 /* software hard reset */ +-#define RCR_SWSR 0x00000001 /* software soft reset */ ++ u32 rpr; /* Reset protection Register */ ++ u32 rcr; /* Reset Control Register */ ++#define RCR_SWHR 0x00000002 /* software hard reset */ ++#define RCR_SWSR 0x00000001 /* software soft reset */ + #define RCR_RES ~(RCR_SWHR | RCR_SWSR) +- u32 rcer; /* Reset Control Enable Register */ +-#define RCER_CRE 0x00000001 /* software hard reset */ ++ u32 rcer; /* Reset Control Enable Register */ ++#define RCER_CRE 0x00000001 /* software hard reset */ + #define RCER_RES ~(RCER_CRE) +- u8 res1[0xDC]; +-} reset8349_t; ++ u8 res1[0xDC]; ++} reset83xx_t; + +-typedef struct clk8349 { +- u32 spmr; /* system PLL mode Register */ ++typedef struct clk83xx { ++ u32 spmr; /* system PLL mode Register */ + #define SPMR_LBIUCM 0x80000000 /* LBIUCM */ + #define SPMR_DDRCM 0x40000000 /* DDRCM */ ++#if defined (CONFIG_MPC8349) + #define SPMR_SVCOD 0x30000000 /* SVCOD */ +-#define SPMR_SPMF 0x0F000000 /* SPMF */ +-#define SPMR_CKID 0x00800000 /* CKID */ ++#endif ++#define SPMR_SPMF 0x0F000000 /* SPMF */ ++#define SPMR_CKID 0x00800000 /* CKID */ + #define SPMR_CKID_SHIFT 23 + #define SPMR_COREPLL 0x007F0000 /* COREPLL */ + #define SPMR_CEVCOD 0x000000C0 /* CEVCOD */ + #define SPMR_CEPDF 0x00000020 /* CEPDF */ + #define SPMR_CEPMF 0x0000001F /* CEPMF */ ++#if defined (CONFIG_MPC8349) + #define SPMR_RES ~(SPMR_LBIUCM | SPMR_DDRCM | SPMR_SVCOD \ + | SPMR_SPMF | SPMR_CKID | SPMR_COREPLL \ + | SPMR_CEVCOD | SPMR_CEPDF | SPMR_CEPMF) +- u32 occr; /* output clock control Register */ ++#elif defined (CONFIG_MPC8360) ++#define SPMR_RES ~(SPMR_LBIUCM | SPMR_DDRCM | SPMR_SPMF \ ++ | SPMR_CKID | SPMR_COREPLL | SPMR_CEVCOD \ ++ | SPMR_CEPDF | SPMR_CEPMF) ++#endif ++ u32 occr; /* output clock control Register */ + #define OCCR_PCICOE0 0x80000000 /* PCICOE0 */ + #define OCCR_PCICOE1 0x40000000 /* PCICOE1 */ + #define OCCR_PCICOE2 0x20000000 /* PCICOE2 */ ++#if defined (CONFIG_MPC8349) + #define OCCR_PCICOE3 0x10000000 /* PCICOE3 */ + #define OCCR_PCICOE4 0x08000000 /* PCICOE4 */ + #define OCCR_PCICOE5 0x04000000 /* PCICOE5 */ + #define OCCR_PCICOE6 0x02000000 /* PCICOE6 */ + #define OCCR_PCICOE7 0x01000000 /* PCICOE7 */ ++#endif + #define OCCR_PCICD0 0x00800000 /* PCICD0 */ + #define OCCR_PCICD1 0x00400000 /* PCICD1 */ + #define OCCR_PCICD2 0x00200000 /* PCICD2 */ ++#if defined (CONFIG_MPC8349) + #define OCCR_PCICD3 0x00100000 /* PCICD3 */ + #define OCCR_PCICD4 0x00080000 /* PCICD4 */ + #define OCCR_PCICD5 0x00040000 /* PCICD5 */ +@@ -522,72 +684,253 @@ typedef struct clk8349 { + | OCCR_PCICD1 | OCCR_PCICD2 | OCCR_PCICD3 \ + | OCCR_PCICD4 | OCCR_PCICD5 | OCCR_PCICD6 \ + | OCCR_PCICD7 | OCCR_PCI1CR | OCCR_PCI2CR ) +- u32 sccr; /* system clock control Register */ +-#define SCCR_TSEC1CM 0xc0000000 /* TSEC1CM */ ++#endif ++#if defined (CONFIG_MPC8360) ++#define OCCR_PCICR 0x00000002 /* PCI clock rate */ ++#define OCCR_RES ~(OCCR_PCICOE0|OCCR_PCICOE1|OCCR_PCICOE2 \ ++ |OCCR_PCICD0|OCCR_PCICD1|OCCR_PCICD2|OCCR_PCICR ) ++#endif ++ u32 sccr; /* system clock control Register */ ++#if defined (CONFIG_MPC8349) ++#define SCCR_TSEC1CM 0xc0000000 /* TSEC1CM */ + #define SCCR_TSEC1CM_SHIFT 30 +-#define SCCR_TSEC2CM 0x30000000 /* TSEC2CM */ ++#define SCCR_TSEC2CM 0x30000000 /* TSEC2CM */ + #define SCCR_TSEC2CM_SHIFT 28 +-#define SCCR_ENCCM 0x03000000 /* ENCCM */ ++#endif ++#define SCCR_ENCCM 0x03000000 /* ENCCM */ + #define SCCR_ENCCM_SHIFT 24 +-#define SCCR_USBMPHCM 0x00c00000 /* USBMPHCM */ ++#if defined (CONFIG_MPC8349) ++#define SCCR_USBMPHCM 0x00c00000 /* USBMPHCM */ + #define SCCR_USBMPHCM_SHIFT 22 +-#define SCCR_USBDRCM 0x00300000 /* USBDRCM */ ++#define SCCR_USBDRCM 0x00300000 /* USBDRCM */ + #define SCCR_USBDRCM_SHIFT 20 +-#define SCCR_PCICM 0x00010000 /* PCICM */ ++#endif ++#define SCCR_PCICM 0x00010000 /* PCICM */ ++#if defined (CONFIG_MPC8349) + #define SCCR_RES ~( SCCR_TSEC1CM | SCCR_TSEC2CM | SCCR_ENCCM \ + | SCCR_USBMPHCM | SCCR_USBDRCM | SCCR_PCICM) +- u8 res0[0xF4]; +-} clk8349_t; ++#endif ++#if defined (CONFIG_MPC8360) ++#define SCCR_RES ~(SCCR_ENCCM | SCCR_PCICM) ++#endif ++ u8 res0[0xF4]; ++} clk83xx_t; + + /* + * Power Management Control Module + */ +-typedef struct pmc8349 { +- u32 pmccr; /* PMC Configuration Register */ +-#define PMCCR_SLPEN 0x00000001 /* System Low Power Enable */ +-#define PMCCR_DLPEN 0x00000002 /* DDR SDRAM Low Power Enable */ +-#define PMCCR_RES ~(PMCCR_SLPEN | PMCCR_DLPEN) +- u32 pmcer; /* PMC Event Register */ +-#define PMCER_PMCI 0x00000001 /* PMC Interrupt */ ++typedef struct pmc83xx { ++ u32 pmccr; /* PMC Configuration Register */ ++#define PMCCR_SLPEN 0x00000001 /* System Low Power Enable */ ++#define PMCCR_DLPEN 0x00000002 /* DDR SDRAM Low Power Enable */ ++#if defined (CONFIG_MPC8360) ++#define PMCCR_SDLPEN 0x00000004 /* Secondary DDR SDRAM Low Power Enable */ ++#define PMCCR_RES ~(PMCCR_SLPEN | PMCCR_DLPEN | PMCCR_SDLPEN) ++#elif defined (CONFIG_MPC8349) ++#define PMCCR_RES ~(PMCCR_SLPEN | PMCCR_DLPEN) ++#endif ++ u32 pmcer; /* PMC Event Register */ ++#define PMCER_PMCI 0x00000001 /* PMC Interrupt */ + #define PMCER_RES ~(PMCER_PMCI) +- u32 pmcmr; /* PMC Mask Register */ +-#define PMCMR_PMCIE 0x0001 /* PMC Interrupt Enable */ ++ u32 pmcmr; /* PMC Mask Register */ ++#define PMCMR_PMCIE 0x0001 /* PMC Interrupt Enable */ + #define PMCMR_RES ~(PMCMR_PMCIE) + u8 res0[0xF4]; +-} pmc8349_t; +- ++} pmc83xx_t; + ++#if defined (CONFIG_MPC8349) + /* + * general purpose I/O module + */ +-typedef struct gpio8349 { +- u32 dir; /* direction register */ +- u32 odr; /* open drain register */ +- u32 dat; /* data register */ +- u32 ier; /* interrupt event register */ +- u32 imr; /* interrupt mask register */ +- u32 icr; /* external interrupt control register */ ++typedef struct gpio83xx { ++ u32 dir; /* direction register */ ++ u32 odr; /* open drain register */ ++ u32 dat; /* data register */ ++ u32 ier; /* interrupt event register */ ++ u32 imr; /* interrupt mask register */ ++ u32 icr; /* external interrupt control register */ + u8 res0[0xE8]; +-} gpio8349_t; ++} gpio83xx_t; ++#endif ++ ++#if defined (CONFIG_MPC8360) ++/* ++ * QE Ports Interrupts Registers ++ */ ++typedef struct qepi83xx { ++ u8 res0[0xC]; ++ u32 qepier; /* QE Ports Interrupt Event Register */ ++#define QEPIER_PA15 0x80000000 ++#define QEPIER_PA16 0x40000000 ++#define QEPIER_PA29 0x20000000 ++#define QEPIER_PA30 0x10000000 ++#define QEPIER_PB3 0x08000000 ++#define QEPIER_PB5 0x04000000 ++#define QEPIER_PB12 0x02000000 ++#define QEPIER_PB13 0x01000000 ++#define QEPIER_PB26 0x00800000 ++#define QEPIER_PB27 0x00400000 ++#define QEPIER_PC27 0x00200000 ++#define QEPIER_PC28 0x00100000 ++#define QEPIER_PC29 0x00080000 ++#define QEPIER_PD12 0x00040000 ++#define QEPIER_PD13 0x00020000 ++#define QEPIER_PD16 0x00010000 ++#define QEPIER_PD17 0x00008000 ++#define QEPIER_PD26 0x00004000 ++#define QEPIER_PD27 0x00002000 ++#define QEPIER_PE12 0x00001000 ++#define QEPIER_PE13 0x00000800 ++#define QEPIER_PE24 0x00000400 ++#define QEPIER_PE25 0x00000200 ++#define QEPIER_PE26 0x00000100 ++#define QEPIER_PE27 0x00000080 ++#define QEPIER_PE31 0x00000040 ++#define QEPIER_PF20 0x00000020 ++#define QEPIER_PG31 0x00000010 ++#define QEPIER_RES ~(QEPIER_PA15|QEPIER_PA16|QEPIER_PA29|QEPIER_PA30|QEPIER_PB3 \ ++ |QEPIER_PB5|QEPIER_PB12|QEPIER_PB13|QEPIER_PB26|QEPIER_PB27 \ ++ |QEPIER_PC27|QEPIER_PC28|QEPIER_PC29|QEPIER_PD12|QEPIER_PD13 \ ++ |QEPIER_PD16|QEPIER_PD17|QEPIER_PD26|QEPIER_PD27|QEPIER_PE12 \ ++ |QEPIER_PE13|QEPIER_PE24|QEPIER_PE25|QEPIER_PE26|QEPIER_PE27 \ ++ |QEPIER_PE31|QEPIER_PF20|QEPIER_PG31) ++ u32 qepimr; /* QE Ports Interrupt Mask Register */ ++#define QEPIMR_PA15 0x80000000 ++#define QEPIMR_PA16 0x40000000 ++#define QEPIMR_PA29 0x20000000 ++#define QEPIMR_PA30 0x10000000 ++#define QEPIMR_PB3 0x08000000 ++#define QEPIMR_PB5 0x04000000 ++#define QEPIMR_PB12 0x02000000 ++#define QEPIMR_PB13 0x01000000 ++#define QEPIMR_PB26 0x00800000 ++#define QEPIMR_PB27 0x00400000 ++#define QEPIMR_PC27 0x00200000 ++#define QEPIMR_PC28 0x00100000 ++#define QEPIMR_PC29 0x00080000 ++#define QEPIMR_PD12 0x00040000 ++#define QEPIMR_PD13 0x00020000 ++#define QEPIMR_PD16 0x00010000 ++#define QEPIMR_PD17 0x00008000 ++#define QEPIMR_PD26 0x00004000 ++#define QEPIMR_PD27 0x00002000 ++#define QEPIMR_PE12 0x00001000 ++#define QEPIMR_PE13 0x00000800 ++#define QEPIMR_PE24 0x00000400 ++#define QEPIMR_PE25 0x00000200 ++#define QEPIMR_PE26 0x00000100 ++#define QEPIMR_PE27 0x00000080 ++#define QEPIMR_PE31 0x00000040 ++#define QEPIMR_PF20 0x00000020 ++#define QEPIMR_PG31 0x00000010 ++#define QEPIMR_RES ~(QEPIMR_PA15|QEPIMR_PA16|QEPIMR_PA29|QEPIMR_PA30|QEPIMR_PB3 \ ++ |QEPIMR_PB5|QEPIMR_PB12|QEPIMR_PB13|QEPIMR_PB26|QEPIMR_PB27 \ ++ |QEPIMR_PC27|QEPIMR_PC28|QEPIMR_PC29|QEPIMR_PD12|QEPIMR_PD13 \ ++ |QEPIMR_PD16|QEPIMR_PD17|QEPIMR_PD26|QEPIMR_PD27|QEPIMR_PE12 \ ++ |QEPIMR_PE13|QEPIMR_PE24|QEPIMR_PE25|QEPIMR_PE26|QEPIMR_PE27 \ ++ |QEPIMR_PE31|QEPIMR_PF20|QEPIMR_PG31) ++ u32 qepicr; /* QE Ports Interrupt Control Register */ ++#define QEPICR_PA15 0x80000000 ++#define QEPICR_PA16 0x40000000 ++#define QEPICR_PA29 0x20000000 ++#define QEPICR_PA30 0x10000000 ++#define QEPICR_PB3 0x08000000 ++#define QEPICR_PB5 0x04000000 ++#define QEPICR_PB12 0x02000000 ++#define QEPICR_PB13 0x01000000 ++#define QEPICR_PB26 0x00800000 ++#define QEPICR_PB27 0x00400000 ++#define QEPICR_PC27 0x00200000 ++#define QEPICR_PC28 0x00100000 ++#define QEPICR_PC29 0x00080000 ++#define QEPICR_PD12 0x00040000 ++#define QEPICR_PD13 0x00020000 ++#define QEPICR_PD16 0x00010000 ++#define QEPICR_PD17 0x00008000 ++#define QEPICR_PD26 0x00004000 ++#define QEPICR_PD27 0x00002000 ++#define QEPICR_PE12 0x00001000 ++#define QEPICR_PE13 0x00000800 ++#define QEPICR_PE24 0x00000400 ++#define QEPICR_PE25 0x00000200 ++#define QEPICR_PE26 0x00000100 ++#define QEPICR_PE27 0x00000080 ++#define QEPICR_PE31 0x00000040 ++#define QEPICR_PF20 0x00000020 ++#define QEPICR_PG31 0x00000010 ++#define QEPICR_RES ~(QEPICR_PA15|QEPICR_PA16|QEPICR_PA29|QEPICR_PA30|QEPICR_PB3 \ ++ |QEPICR_PB5|QEPICR_PB12|QEPICR_PB13|QEPICR_PB26|QEPICR_PB27 \ ++ |QEPICR_PC27|QEPICR_PC28|QEPICR_PC29|QEPICR_PD12|QEPICR_PD13 \ ++ |QEPICR_PD16|QEPICR_PD17|QEPICR_PD26|QEPICR_PD27|QEPICR_PE12 \ ++ |QEPICR_PE13|QEPICR_PE24|QEPICR_PE25|QEPICR_PE26|QEPICR_PE27 \ ++ |QEPICR_PE31|QEPICR_PF20|QEPICR_PG31) ++ u8 res1[0xE8]; ++} qepi83xx_t; ++ ++/* ++ * general purpose I/O module ++ */ ++typedef struct gpio_n { ++ u32 podr; /* Open Drain Register */ ++ u32 pdat; /* Data Register */ ++ u32 dir1; /* direction register 1 */ ++ u32 dir2; /* direction register 2 */ ++ u32 ppar1; /* Pin Assignment Register 1 */ ++ u32 ppar2; /* Pin Assignment Register 2 */ ++} gpio_n_t; ++ ++typedef struct gpio83xx { ++ gpio_n_t ioport[0x7]; ++ u8 res0[0x358]; ++} gpio83xx_t; ++ ++/* ++ * QE Secondary Bus Access Windows ++ */ ++ ++typedef struct qesba83xx { ++ u32 lbmcsar; /* Local bus memory controller start address */ ++#define LBMCSAR_SA 0x000FFFFF /* 20 most-significant bits of the start address */ ++#define LBMCSAR_RES ~(LBMCSAR_SA) ++ u32 sdmcsar; /* Secondary DDR memory controller start address */ ++#define SDMCSAR_SA 0x000FFFFF /* 20 most-significant bits of the start address */ ++#define SDMCSAR_RES ~(SDMCSAR_SA) ++ u8 res0[0x38]; ++ u32 lbmcear; /* Local bus memory controller end address */ ++#define LBMCEAR_EA 0x000FFFFF /* 20 most-significant bits of the end address */ ++#define LBMCEAR_RES ~(LBMCEAR_EA) ++ u32 sdmcear; /* Secondary DDR memory controller end address */ ++#define SDMCEAR_EA 0x000FFFFF /* 20 most-significant bits of the end address */ ++#define SDMCEAR_RES ~(SDMCEAR_EA) ++ u8 res1[0x38]; ++ u32 lbmcar; /* Local bus memory controller attributes */ ++#define LBMCAR_WEN 0x00000001 /* Forward transactions to the QE local bus */ ++#define LBMCAR_RES ~(LBMCAR_WEN) ++ u32 sdmcar; /* Secondary DDR memory controller attributes */ ++#define SDMCAR_WEN 0x00000001 /* Forward transactions to the second DDR bus */ ++#define SDMCAR_RES ~(SDMCAR_WEN) ++ u8 res2[0x778]; ++} qesba83xx_t; ++#endif + + /* + * DDR Memory Controller Memory Map + */ +-typedef struct ddr_cs_bnds{ ++typedef struct ddr_cs_bnds { + u32 csbnds; + #define CSBNDS_SA 0x00FF0000 +-#define CSBNDS_SA_SHIFT 8 ++#define CSBNDS_SA_SHIFT 8 + #define CSBNDS_EA 0x000000FF +-#define CSBNDS_EA_SHIFT 24 +- u8 res0[4]; ++#define CSBNDS_EA_SHIFT 24 ++ u8 res0[4]; + } ddr_cs_bnds_t; + +-typedef struct ddr8349{ +- ddr_cs_bnds_t csbnds[4]; /**< Chip Select x Memory Bounds */ ++typedef struct ddr83xx { ++ ddr_cs_bnds_t csbnds[4]; /**< Chip Select x Memory Bounds */ + u8 res0[0x60]; +- u32 cs_config[4]; /**< Chip Select x Configuration */ +-#define CSCONFIG_EN 0x80000000 +-#define CSCONFIG_AP 0x00800000 ++ u32 cs_config[4]; /**< Chip Select x Configuration */ ++#define CSCONFIG_EN 0x80000000 ++#define CSCONFIG_AP 0x00800000 + #define CSCONFIG_ROW_BIT 0x00000700 + #define CSCONFIG_ROW_BIT_12 0x00000000 + #define CSCONFIG_ROW_BIT_13 0x00000100 +@@ -598,7 +941,7 @@ typedef struct ddr8349{ + #define CSCONFIG_COL_BIT_10 0x00000002 + #define CSCONFIG_COL_BIT_11 0x00000003 + u8 res1[0x78]; +- u32 timing_cfg_1; /**< SDRAM Timing Configuration 1 */ ++ u32 timing_cfg_1; /**< SDRAM Timing Configuration 1 */ + #define TIMING_CFG1_PRETOACT 0x70000000 + #define TIMING_CFG1_PRETOACT_SHIFT 28 + #define TIMING_CFG1_ACTTOPRE 0x0F000000 +@@ -610,70 +953,70 @@ typedef struct ddr8349{ + #define TIMING_CFG1_REFREC 0x0000F000 + #define TIMING_CFG1_REFREC_SHIFT 12 + #define TIMING_CFG1_WRREC 0x00000700 +-#define TIMING_CFG1_WRREC_SHIFT 8 ++#define TIMING_CFG1_WRREC_SHIFT 8 + #define TIMING_CFG1_ACTTOACT 0x00000070 + #define TIMING_CFG1_ACTTOACT_SHIFT 4 + #define TIMING_CFG1_WRTORD 0x00000007 + #define TIMING_CFG1_WRTORD_SHIFT 0 +-#define TIMING_CFG1_CASLAT_20 0x00030000 /* CAS latency = 2.0 */ +-#define TIMING_CFG1_CASLAT_25 0x00040000 /* CAS latency = 2.5 */ ++#define TIMING_CFG1_CASLAT_20 0x00030000 /* CAS latency = 2.0 */ ++#define TIMING_CFG1_CASLAT_25 0x00040000 /* CAS latency = 2.5 */ + +- u32 timing_cfg_2; /**< SDRAM Timing Configuration 2 */ +-#define TIMING_CFG2_CPO 0x0F000000 +-#define TIMING_CFG2_CPO_SHIFT 24 +-#define TIMING_CFG2_ACSM 0x00080000 ++ u32 timing_cfg_2; /**< SDRAM Timing Configuration 2 */ ++#define TIMING_CFG2_CPO 0x0F000000 ++#define TIMING_CFG2_CPO_SHIFT 24 ++#define TIMING_CFG2_ACSM 0x00080000 + #define TIMING_CFG2_WR_DATA_DELAY 0x00001C00 +-#define TIMING_CFG2_WR_DATA_DELAY_SHIFT 10 +-#define TIMING_CFG2_CPO_DEF 0x00000000 /* default (= CASLAT + 1) */ ++#define TIMING_CFG2_WR_DATA_DELAY_SHIFT 10 ++#define TIMING_CFG2_CPO_DEF 0x00000000 /* default (= CASLAT + 1) */ + +- u32 sdram_cfg; /**< SDRAM Control Configuration */ ++ u32 sdram_cfg; /**< SDRAM Control Configuration */ + #define SDRAM_CFG_MEM_EN 0x80000000 +-#define SDRAM_CFG_SREN 0x40000000 ++#define SDRAM_CFG_SREN 0x40000000 + #define SDRAM_CFG_ECC_EN 0x20000000 +-#define SDRAM_CFG_RD_EN 0x10000000 ++#define SDRAM_CFG_RD_EN 0x10000000 + #define SDRAM_CFG_SDRAM_TYPE 0x03000000 + #define SDRAM_CFG_SDRAM_TYPE_SHIFT 24 + #define SDRAM_CFG_DYN_PWR 0x00200000 +-#define SDRAM_CFG_32_BE 0x00080000 +-#define SDRAM_CFG_8_BE 0x00040000 +-#define SDRAM_CFG_NCAP 0x00020000 +-#define SDRAM_CFG_2T_EN 0x00008000 ++#define SDRAM_CFG_32_BE 0x00080000 ++#define SDRAM_CFG_8_BE 0x00040000 ++#define SDRAM_CFG_NCAP 0x00020000 ++#define SDRAM_CFG_2T_EN 0x00008000 + #define SDRAM_CFG_SDRAM_TYPE_DDR 0x02000000 + + u8 res2[4]; +- u32 sdram_mode; /**< SDRAM Mode Configuration */ ++ u32 sdram_mode; /**< SDRAM Mode Configuration */ + #define SDRAM_MODE_ESD 0xFFFF0000 + #define SDRAM_MODE_ESD_SHIFT 16 + #define SDRAM_MODE_SD 0x0000FFFF +-#define SDRAM_MODE_SD_SHIFT 0 +-#define DDR_MODE_EXT_MODEREG 0x4000 /* select extended mode reg */ +-#define DDR_MODE_EXT_OPMODE 0x3FF8 /* operating mode, mask */ +-#define DDR_MODE_EXT_OP_NORMAL 0x0000 /* normal operation */ +-#define DDR_MODE_QFC 0x0004 /* QFC / compatibility, mask */ +-#define DDR_MODE_QFC_COMP 0x0000 /* compatible to older SDRAMs */ +-#define DDR_MODE_WEAK 0x0002 /* weak drivers */ +-#define DDR_MODE_DLL_DIS 0x0001 /* disable DLL */ +-#define DDR_MODE_CASLAT 0x0070 /* CAS latency, mask */ +-#define DDR_MODE_CASLAT_15 0x0010 /* CAS latency 1.5 */ +-#define DDR_MODE_CASLAT_20 0x0020 /* CAS latency 2 */ +-#define DDR_MODE_CASLAT_25 0x0060 /* CAS latency 2.5 */ +-#define DDR_MODE_CASLAT_30 0x0030 /* CAS latency 3 */ +-#define DDR_MODE_BTYPE_SEQ 0x0000 /* sequential burst */ +-#define DDR_MODE_BTYPE_ILVD 0x0008 /* interleaved burst */ +-#define DDR_MODE_BLEN_2 0x0001 /* burst length 2 */ +-#define DDR_MODE_BLEN_4 0x0002 /* burst length 4 */ +-#define DDR_REFINT_166MHZ_7US 1302 /* exact value for 7.8125 µs */ +-#define DDR_BSTOPRE 256 /* use 256 cycles as a starting point */ +-#define DDR_MODE_MODEREG 0x0000 /* select mode register */ ++#define SDRAM_MODE_SD_SHIFT 0 ++#define DDR_MODE_EXT_MODEREG 0x4000 /* select extended mode reg */ ++#define DDR_MODE_EXT_OPMODE 0x3FF8 /* operating mode, mask */ ++#define DDR_MODE_EXT_OP_NORMAL 0x0000 /* normal operation */ ++#define DDR_MODE_QFC 0x0004 /* QFC / compatibility, mask */ ++#define DDR_MODE_QFC_COMP 0x0000 /* compatible to older SDRAMs */ ++#define DDR_MODE_WEAK 0x0002 /* weak drivers */ ++#define DDR_MODE_DLL_DIS 0x0001 /* disable DLL */ ++#define DDR_MODE_CASLAT 0x0070 /* CAS latency, mask */ ++#define DDR_MODE_CASLAT_15 0x0010 /* CAS latency 1.5 */ ++#define DDR_MODE_CASLAT_20 0x0020 /* CAS latency 2 */ ++#define DDR_MODE_CASLAT_25 0x0060 /* CAS latency 2.5 */ ++#define DDR_MODE_CASLAT_30 0x0030 /* CAS latency 3 */ ++#define DDR_MODE_BTYPE_SEQ 0x0000 /* sequential burst */ ++#define DDR_MODE_BTYPE_ILVD 0x0008 /* interleaved burst */ ++#define DDR_MODE_BLEN_2 0x0001 /* burst length 2 */ ++#define DDR_MODE_BLEN_4 0x0002 /* burst length 4 */ ++#define DDR_REFINT_166MHZ_7US 1302 /* exact value for 7.8125 µs */ ++#define DDR_BSTOPRE 256 /* use 256 cycles as a starting point */ ++#define DDR_MODE_MODEREG 0x0000 /* select mode register */ + + u8 res3[8]; +- u32 sdram_interval; /**< SDRAM Interval Configuration */ ++ u32 sdram_interval; /**< SDRAM Interval Configuration */ + #define SDRAM_INTERVAL_REFINT 0x3FFF0000 + #define SDRAM_INTERVAL_REFINT_SHIFT 16 + #define SDRAM_INTERVAL_BSTOPRE 0x00003FFF +-#define SDRAM_INTERVAL_BSTOPRE_SHIFT 0 +- u8 res9[8]; +- u32 sdram_clk_cntl; ++#define SDRAM_INTERVAL_BSTOPRE_SHIFT 0 ++ u8 res9[8]; ++ u32 sdram_clk_cntl; + #define DDR_SDRAM_CLK_CNTL_SS_EN 0x80000000 + #define DDR_SDRAM_CLK_CNTL_CLK_ADJUST_025 0x01000000 + #define DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05 0x02000000 +@@ -683,37 +1026,37 @@ typedef struct ddr8349{ + u8 res4[0xCCC]; + u32 data_err_inject_hi; /**< Memory Data Path Error Injection Mask High */ + u32 data_err_inject_lo; /**< Memory Data Path Error Injection Mask Low */ +- u32 ecc_err_inject; /**< Memory Data Path Error Injection Mask ECC */ ++ u32 ecc_err_inject; /**< Memory Data Path Error Injection Mask ECC */ + #define ECC_ERR_INJECT_EMB (0x80000000>>22) /* ECC Mirror Byte */ + #define ECC_ERR_INJECT_EIEN (0x80000000>>23) /* Error Injection Enable */ + #define ECC_ERR_INJECT_EEIM (0xff000000>>24) /* ECC Erroe Injection Enable */ + #define ECC_ERR_INJECT_EEIM_SHIFT 0 + u8 res5[0x14]; +- u32 capture_data_hi; /**< Memory Data Path Read Capture High */ +- u32 capture_data_lo; /**< Memory Data Path Read Capture Low */ +- u32 capture_ecc; /**< Memory Data Path Read Capture ECC */ ++ u32 capture_data_hi; /**< Memory Data Path Read Capture High */ ++ u32 capture_data_lo; /**< Memory Data Path Read Capture Low */ ++ u32 capture_ecc; /**< Memory Data Path Read Capture ECC */ + #define CAPTURE_ECC_ECE (0xff000000>>24) + #define CAPTURE_ECC_ECE_SHIFT 0 + u8 res6[0x14]; +- u32 err_detect; /**< Memory Error Detect */ +-#define ECC_ERROR_DETECT_MME (0x80000000>>0) /* Multiple Memory Errors */ ++ u32 err_detect; /**< Memory Error Detect */ ++#define ECC_ERROR_DETECT_MME (0x80000000>>0) /* Multiple Memory Errors */ + #define ECC_ERROR_DETECT_MBE (0x80000000>>28) /* Multiple-Bit Error */ + #define ECC_ERROR_DETECT_SBE (0x80000000>>29) /* Single-Bit ECC Error Pickup */ + #define ECC_ERROR_DETECT_MSE (0x80000000>>31) /* Memory Select Error */ +- u32 err_disable; /**< Memory Error Disable */ ++ u32 err_disable; /**< Memory Error Disable */ + #define ECC_ERROR_DISABLE_MBED (0x80000000>>28) /* Multiple-Bit ECC Error Disable */ + #define ECC_ERROR_DISABLE_SBED (0x80000000>>29) /* Sinle-Bit ECC Error disable */ + #define ECC_ERROR_DISABLE_MSED (0x80000000>>31) /* Memory Select Error Disable */ + #define ECC_ERROR_ENABLE ~(ECC_ERROR_DISABLE_MSED|ECC_ERROR_DISABLE_SBED|ECC_ERROR_DISABLE_MBED) +- u32 err_int_en; /**< Memory Error Interrupt Enable */ ++ u32 err_int_en; /**< Memory Error Interrupt Enable */ + #define ECC_ERR_INT_EN_MBEE (0x80000000>>28) /* Multiple-Bit ECC Error Interrupt Enable */ + #define ECC_ERR_INT_EN_SBEE (0x80000000>>29) /* Single-Bit ECC Error Interrupt Enable */ + #define ECC_ERR_INT_EN_MSEE (0x80000000>>31) /* Memory Select Error Interrupt Enable */ + #define ECC_ERR_INT_DISABLE ~(ECC_ERR_INT_EN_MBEE|ECC_ERR_INT_EN_SBEE|ECC_ERR_INT_EN_MSEE) + u32 capture_attributes; /**< Memory Error Attributes Capture */ +-#define ECC_CAPT_ATTR_BNUM (0xe0000000>>1) /* Data Beat Num */ ++#define ECC_CAPT_ATTR_BNUM (0xe0000000>>1) /* Data Beat Num */ + #define ECC_CAPT_ATTR_BNUM_SHIFT 28 +-#define ECC_CAPT_ATTR_TSIZ (0xc0000000>>6) /* Transaction Size */ ++#define ECC_CAPT_ATTR_TSIZ (0xc0000000>>6) /* Transaction Size */ + #define ECC_CAPT_ATTR_TSIZ_FOUR_DW 0 + #define ECC_CAPT_ATTR_TSIZ_ONE_DW 1 + #define ECC_CAPT_ATTR_TSIZ_TWO_DW 2 +@@ -738,209 +1081,207 @@ typedef struct ddr8349{ + #define ECC_CAPT_ATTR_TTYP_R_M_W 0x3 + #define ECC_CAPT_ATTR_TTYP_SHIFT 12 + #define ECC_CAPT_ATTR_VLD (0x80000000>>31) /* Valid */ +- u32 capture_address; /**< Memory Error Address Capture */ ++ u32 capture_address; /**< Memory Error Address Capture */ + u32 capture_ext_address;/**< Memory Error Extended Address Capture */ +- u32 err_sbe; /**< Memory Single-Bit ECC Error Management */ +-#define ECC_ERROR_MAN_SBET (0xff000000>>8) /* Single-Bit Error Threshold 0..255*/ ++ u32 err_sbe; /**< Memory Single-Bit ECC Error Management */ ++#define ECC_ERROR_MAN_SBET (0xff000000>>8) /* Single-Bit Error Threshold 0..255 */ + #define ECC_ERROR_MAN_SBET_SHIFT 16 +-#define ECC_ERROR_MAN_SBEC (0xff000000>>24) /* Single Bit Error Counter 0..255*/ ++#define ECC_ERROR_MAN_SBEC (0xff000000>>24) /* Single Bit Error Counter 0..255 */ + #define ECC_ERROR_MAN_SBEC_SHIFT 0 + u8 res7[0xA4]; + u32 debug_reg; + u8 res8[0xFC]; +-} ddr8349_t; ++} ddr83xx_t; + + /* + * I2C1 Controller + */ + +- + /* + * DUART + */ +-typedef struct duart8349{ ++typedef struct duart83xx { + u8 urbr_ulcr_udlb; /**< combined register for URBR, UTHR and UDLB */ +- u8 uier_udmb; /**< combined register for UIER and UDMB */ ++ u8 uier_udmb; /**< combined register for UIER and UDMB */ + u8 uiir_ufcr_uafr; /**< combined register for UIIR, UFCR and UAFR */ +- u8 ulcr; /**< line control register */ +- u8 umcr; /**< MODEM control register */ +- u8 ulsr; /**< line status register */ +- u8 umsr; /**< MODEM status register */ +- u8 uscr; /**< scratch register */ ++ u8 ulcr; /**< line control register */ ++ u8 umcr; /**< MODEM control register */ ++ u8 ulsr; /**< line status register */ ++ u8 umsr; /**< MODEM status register */ ++ u8 uscr; /**< scratch register */ + u8 res0[8]; +- u8 udsr; /**< DMA status register */ ++ u8 udsr; /**< DMA status register */ + u8 res1[3]; + u8 res2[0xEC]; +-} duart8349_t; ++} duart83xx_t; + + /* + * Local Bus Controller Registers + */ +-typedef struct lbus_bank{ +- u32 br; /**< Base Register */ +- u32 or; /**< Base Register */ ++typedef struct lbus_bank { ++ u32 br; /**< Base Register */ ++ u32 or; /**< Base Register */ + } lbus_bank_t; + +-typedef struct lbus8349 { ++typedef struct lbus83xx { + lbus_bank_t bank[8]; + u8 res0[0x28]; +- u32 mar; /**< UPM Address Register */ ++ u32 mar; /**< UPM Address Register */ + u8 res1[0x4]; +- u32 mamr; /**< UPMA Mode Register */ +- u32 mbmr; /**< UPMB Mode Register */ +- u32 mcmr; /**< UPMC Mode Register */ ++ u32 mamr; /**< UPMA Mode Register */ ++ u32 mbmr; /**< UPMB Mode Register */ ++ u32 mcmr; /**< UPMC Mode Register */ + u8 res2[0x8]; +- u32 mrtpr; /**< Memory Refresh Timer Prescaler Register */ +- u32 mdr; /**< UPM Data Register */ ++ u32 mrtpr; /**< Memory Refresh Timer Prescaler Register */ ++ u32 mdr; /**< UPM Data Register */ + u8 res3[0x8]; +- u32 lsdmr; /**< SDRAM Mode Register */ ++ u32 lsdmr; /**< SDRAM Mode Register */ + u8 res4[0x8]; +- u32 lurt; /**< UPM Refresh Timer */ +- u32 lsrt; /**< SDRAM Refresh Timer */ ++ u32 lurt; /**< UPM Refresh Timer */ ++ u32 lsrt; /**< SDRAM Refresh Timer */ + u8 res5[0x8]; +- u32 ltesr; /**< Transfer Error Status Register */ +- u32 ltedr; /**< Transfer Error Disable Register */ +- u32 lteir; /**< Transfer Error Interrupt Register */ +- u32 lteatr; /**< Transfer Error Attributes Register */ +- u32 ltear; /**< Transfer Error Address Register */ ++ u32 ltesr; /**< Transfer Error Status Register */ ++ u32 ltedr; /**< Transfer Error Disable Register */ ++ u32 lteir; /**< Transfer Error Interrupt Register */ ++ u32 lteatr; /**< Transfer Error Attributes Register */ ++ u32 ltear; /**< Transfer Error Address Register */ + u8 res6[0xC]; +- u32 lbcr; /**< Configuration Register */ ++ u32 lbcr; /**< Configuration Register */ + #define LBCR_LDIS 0x80000000 +-#define LBCR_LDIS_SHIFT 31 ++#define LBCR_LDIS_SHIFT 31 + #define LBCR_BCTLC 0x00C00000 + #define LBCR_BCTLC_SHIFT 22 + #define LBCR_LPBSE 0x00020000 + #define LBCR_LPBSE_SHIFT 17 + #define LBCR_EPAR 0x00010000 +-#define LBCR_EPAR_SHIFT 16 ++#define LBCR_EPAR_SHIFT 16 + #define LBCR_BMT 0x0000FF00 +-#define LBCR_BMT_SHIFT 8 +- u32 lcrr; /**< Clock Ratio Register */ ++#define LBCR_BMT_SHIFT 8 ++ u32 lcrr; /**< Clock Ratio Register */ + #define LCRR_DBYP 0x80000000 +-#define LCRR_DBYP_SHIFT 31 ++#define LCRR_DBYP_SHIFT 31 + #define LCRR_BUFCMDC 0x30000000 + #define LCRR_BUFCMDC_SHIFT 28 + #define LCRR_ECL 0x03000000 +-#define LCRR_ECL_SHIFT 24 ++#define LCRR_ECL_SHIFT 24 + #define LCRR_EADC 0x00030000 +-#define LCRR_EADC_SHIFT 16 ++#define LCRR_EADC_SHIFT 16 + #define LCRR_CLKDIV 0x0000000F + #define LCRR_CLKDIV_SHIFT 0 + +- + u8 res7[0x28]; + u8 res8[0xF00]; +-} lbus8349_t; ++} lbus83xx_t; + ++#if defined (CONFIG_MPC8349) + /* + * Serial Peripheral Interface + */ +-typedef struct spi8349 +-{ ++typedef struct spi83xx { + u32 mode; /**< mode register */ + u32 event; /**< event register */ + u32 mask; /**< mask register */ + u32 com; /**< command register */ + u8 res0[0x10]; +- u32 tx; /**< transmit register */ +- u32 rx; /**< receive register */ ++ u32 tx; /**< transmit register */ ++ u32 rx; /**< receive register */ + u8 res1[0xD8]; +-} spi8349_t; +- ++} spi83xx_t; ++#endif + + /* + * DMA/Messaging Unit + */ +-typedef struct dma8349 { +- u32 res0[0xC]; /* 0x0-0x29 reseverd */ +- u32 omisr; /* 0x30 Outbound message interrupt status register */ +- u32 omimr; /* 0x34 Outbound message interrupt mask register */ +- u32 res1[0x6]; /* 0x38-0x49 reserved */ +- +- u32 imr0; /* 0x50 Inbound message register 0 */ +- u32 imr1; /* 0x54 Inbound message register 1 */ +- u32 omr0; /* 0x58 Outbound message register 0 */ +- u32 omr1; /* 0x5C Outbound message register 1 */ +- +- u32 odr; /* 0x60 Outbound doorbell register */ +- u32 res2; /* 0x64-0x67 reserved */ +- u32 idr; /* 0x68 Inbound doorbell register */ +- u32 res3[0x5]; /* 0x6C-0x79 reserved */ +- +- u32 imisr; /* 0x80 Inbound message interrupt status register */ +- u32 imimr; /* 0x84 Inbound message interrupt mask register */ +- u32 res4[0x1E]; /* 0x88-0x99 reserved */ +- +- u32 dmamr0; /* 0x100 DMA 0 mode register */ +- u32 dmasr0; /* 0x104 DMA 0 status register */ +- u32 dmacdar0; /* 0x108 DMA 0 current descriptor address register */ +- u32 res5; /* 0x10C reserved */ +- u32 dmasar0; /* 0x110 DMA 0 source address register */ +- u32 res6; /* 0x114 reserved */ +- u32 dmadar0; /* 0x118 DMA 0 destination address register */ +- u32 res7; /* 0x11C reserved */ +- u32 dmabcr0; /* 0x120 DMA 0 byte count register */ +- u32 dmandar0; /* 0x124 DMA 0 next descriptor address register */ +- u32 res8[0x16]; /* 0x128-0x179 reserved */ +- +- u32 dmamr1; /* 0x180 DMA 1 mode register */ +- u32 dmasr1; /* 0x184 DMA 1 status register */ +- u32 dmacdar1; /* 0x188 DMA 1 current descriptor address register */ +- u32 res9; /* 0x18C reserved */ +- u32 dmasar1; /* 0x190 DMA 1 source address register */ +- u32 res10; /* 0x194 reserved */ +- u32 dmadar1; /* 0x198 DMA 1 destination address register */ +- u32 res11; /* 0x19C reserved */ +- u32 dmabcr1; /* 0x1A0 DMA 1 byte count register */ +- u32 dmandar1; /* 0x1A4 DMA 1 next descriptor address register */ +- u32 res12[0x16];/* 0x1A8-0x199 reserved */ +- +- u32 dmamr2; /* 0x200 DMA 2 mode register */ +- u32 dmasr2; /* 0x204 DMA 2 status register */ +- u32 dmacdar2; /* 0x208 DMA 2 current descriptor address register */ +- u32 res13; /* 0x20C reserved */ +- u32 dmasar2; /* 0x210 DMA 2 source address register */ +- u32 res14; /* 0x214 reserved */ +- u32 dmadar2; /* 0x218 DMA 2 destination address register */ +- u32 res15; /* 0x21C reserved */ +- u32 dmabcr2; /* 0x220 DMA 2 byte count register */ +- u32 dmandar2; /* 0x224 DMA 2 next descriptor address register */ +- u32 res16[0x16];/* 0x228-0x279 reserved */ +- +- u32 dmamr3; /* 0x280 DMA 3 mode register */ +- u32 dmasr3; /* 0x284 DMA 3 status register */ +- u32 dmacdar3; /* 0x288 DMA 3 current descriptor address register */ +- u32 res17; /* 0x28C reserved */ +- u32 dmasar3; /* 0x290 DMA 3 source address register */ +- u32 res18; /* 0x294 reserved */ +- u32 dmadar3; /* 0x298 DMA 3 destination address register */ +- u32 res19; /* 0x29C reserved */ +- u32 dmabcr3; /* 0x2A0 DMA 3 byte count register */ +- u32 dmandar3; /* 0x2A4 DMA 3 next descriptor address register */ +- +- u32 dmagsr; /* 0x2A8 DMA general status register */ +- u32 res20[0x15];/* 0x2AC-0x2FF reserved */ +-} dma8349_t; ++typedef struct dma83xx { ++ u32 res0[0xC]; /* 0x0-0x29 reseverd */ ++ u32 omisr; /* 0x30 Outbound message interrupt status register */ ++ u32 omimr; /* 0x34 Outbound message interrupt mask register */ ++ u32 res1[0x6]; /* 0x38-0x49 reserved */ ++ ++ u32 imr0; /* 0x50 Inbound message register 0 */ ++ u32 imr1; /* 0x54 Inbound message register 1 */ ++ u32 omr0; /* 0x58 Outbound message register 0 */ ++ u32 omr1; /* 0x5C Outbound message register 1 */ ++ ++ u32 odr; /* 0x60 Outbound doorbell register */ ++ u32 res2; /* 0x64-0x67 reserved */ ++ u32 idr; /* 0x68 Inbound doorbell register */ ++ u32 res3[0x5]; /* 0x6C-0x79 reserved */ ++ ++ u32 imisr; /* 0x80 Inbound message interrupt status register */ ++ u32 imimr; /* 0x84 Inbound message interrupt mask register */ ++ u32 res4[0x1E]; /* 0x88-0x99 reserved */ ++ ++ u32 dmamr0; /* 0x100 DMA 0 mode register */ ++ u32 dmasr0; /* 0x104 DMA 0 status register */ ++ u32 dmacdar0; /* 0x108 DMA 0 current descriptor address register */ ++ u32 res5; /* 0x10C reserved */ ++ u32 dmasar0; /* 0x110 DMA 0 source address register */ ++ u32 res6; /* 0x114 reserved */ ++ u32 dmadar0; /* 0x118 DMA 0 destination address register */ ++ u32 res7; /* 0x11C reserved */ ++ u32 dmabcr0; /* 0x120 DMA 0 byte count register */ ++ u32 dmandar0; /* 0x124 DMA 0 next descriptor address register */ ++ u32 res8[0x16]; /* 0x128-0x179 reserved */ ++ ++ u32 dmamr1; /* 0x180 DMA 1 mode register */ ++ u32 dmasr1; /* 0x184 DMA 1 status register */ ++ u32 dmacdar1; /* 0x188 DMA 1 current descriptor address register */ ++ u32 res9; /* 0x18C reserved */ ++ u32 dmasar1; /* 0x190 DMA 1 source address register */ ++ u32 res10; /* 0x194 reserved */ ++ u32 dmadar1; /* 0x198 DMA 1 destination address register */ ++ u32 res11; /* 0x19C reserved */ ++ u32 dmabcr1; /* 0x1A0 DMA 1 byte count register */ ++ u32 dmandar1; /* 0x1A4 DMA 1 next descriptor address register */ ++ u32 res12[0x16]; /* 0x1A8-0x199 reserved */ ++ ++ u32 dmamr2; /* 0x200 DMA 2 mode register */ ++ u32 dmasr2; /* 0x204 DMA 2 status register */ ++ u32 dmacdar2; /* 0x208 DMA 2 current descriptor address register */ ++ u32 res13; /* 0x20C reserved */ ++ u32 dmasar2; /* 0x210 DMA 2 source address register */ ++ u32 res14; /* 0x214 reserved */ ++ u32 dmadar2; /* 0x218 DMA 2 destination address register */ ++ u32 res15; /* 0x21C reserved */ ++ u32 dmabcr2; /* 0x220 DMA 2 byte count register */ ++ u32 dmandar2; /* 0x224 DMA 2 next descriptor address register */ ++ u32 res16[0x16]; /* 0x228-0x279 reserved */ ++ ++ u32 dmamr3; /* 0x280 DMA 3 mode register */ ++ u32 dmasr3; /* 0x284 DMA 3 status register */ ++ u32 dmacdar3; /* 0x288 DMA 3 current descriptor address register */ ++ u32 res17; /* 0x28C reserved */ ++ u32 dmasar3; /* 0x290 DMA 3 source address register */ ++ u32 res18; /* 0x294 reserved */ ++ u32 dmadar3; /* 0x298 DMA 3 destination address register */ ++ u32 res19; /* 0x29C reserved */ ++ u32 dmabcr3; /* 0x2A0 DMA 3 byte count register */ ++ u32 dmandar3; /* 0x2A4 DMA 3 next descriptor address register */ ++ ++ u32 dmagsr; /* 0x2A8 DMA general status register */ ++ u32 res20[0x15]; /* 0x2AC-0x2FF reserved */ ++} dma83xx_t; + + /* DMAMRn bits */ +-#define DMA_CHANNEL_START (0x00000001) /* Bit - DMAMRn CS */ +-#define DMA_CHANNEL_TRANSFER_MODE_DIRECT (0x00000004) /* Bit - DMAMRn CTM */ +-#define DMA_CHANNEL_SOURCE_ADRESSS_HOLD_EN (0x00001000) /* Bit - DMAMRn SAHE */ +-#define DMA_CHANNEL_SOURCE_ADDRESS_HOLD_1B (0x00000000) /* 2Bit- DMAMRn SAHTS 1byte */ +-#define DMA_CHANNEL_SOURCE_ADDRESS_HOLD_2B (0x00004000) /* 2Bit- DMAMRn SAHTS 2bytes */ +-#define DMA_CHANNEL_SOURCE_ADDRESS_HOLD_4B (0x00008000) /* 2Bit- DMAMRn SAHTS 4bytes */ +-#define DMA_CHANNEL_SOURCE_ADDRESS_HOLD_8B (0x0000c000) /* 2Bit- DMAMRn SAHTS 8bytes */ +-#define DMA_CHANNEL_SNOOP (0x00010000) /* Bit - DMAMRn DMSEN */ ++#define DMA_CHANNEL_START (0x00000001) /* Bit - DMAMRn CS */ ++#define DMA_CHANNEL_TRANSFER_MODE_DIRECT (0x00000004) /* Bit - DMAMRn CTM */ ++#define DMA_CHANNEL_SOURCE_ADRESSS_HOLD_EN (0x00001000) /* Bit - DMAMRn SAHE */ ++#define DMA_CHANNEL_SOURCE_ADDRESS_HOLD_1B (0x00000000) /* 2Bit- DMAMRn SAHTS 1byte */ ++#define DMA_CHANNEL_SOURCE_ADDRESS_HOLD_2B (0x00004000) /* 2Bit- DMAMRn SAHTS 2bytes */ ++#define DMA_CHANNEL_SOURCE_ADDRESS_HOLD_4B (0x00008000) /* 2Bit- DMAMRn SAHTS 4bytes */ ++#define DMA_CHANNEL_SOURCE_ADDRESS_HOLD_8B (0x0000c000) /* 2Bit- DMAMRn SAHTS 8bytes */ ++#define DMA_CHANNEL_SNOOP (0x00010000) /* Bit - DMAMRn DMSEN */ + + /* DMASRn bits */ +-#define DMA_CHANNEL_BUSY (0x00000004) /* Bit - DMASRn CB */ +-#define DMA_CHANNEL_TRANSFER_ERROR (0x00000080) /* Bit - DMASRn TE */ ++#define DMA_CHANNEL_BUSY (0x00000004) /* Bit - DMASRn CB */ ++#define DMA_CHANNEL_TRANSFER_ERROR (0x00000080) /* Bit - DMASRn TE */ + + /* + * PCI Software Configuration Registers + */ +-typedef struct pciconf8349 { +- u32 config_address; ++typedef struct pciconf83xx { ++ u32 config_address; + #define PCI_CONFIG_ADDRESS_EN 0x80000000 + #define PCI_CONFIG_ADDRESS_BN_SHIFT 16 + #define PCI_CONFIG_ADDRESS_BN_MASK 0x00ff0000 +@@ -952,235 +1293,788 @@ typedef struct pciconf8349 { + #define PCI_CONFIG_ADDRESS_RN_MASK 0x000000fc + u32 config_data; + u32 int_ack; +- u8 res[116]; +-} pciconf8349_t; ++ u8 res[116]; ++} pciconf83xx_t; + + /* + * PCI Outbound Translation Register + */ + typedef struct pci_outbound_window { +- u32 potar; +- u8 res0[4]; +- u32 pobar; +- u8 res1[4]; +- u32 pocmr; +- u8 res2[4]; +-} pot8349_t; ++ u32 potar; ++ u8 res0[4]; ++ u32 pobar; ++ u8 res1[4]; ++ u32 pocmr; ++ u8 res2[4]; ++} pot83xx_t; ++ + /* + * Sequencer + */ +-typedef struct ios8349 { +- pot8349_t pot[6]; ++typedef struct ios83xx { ++ pot83xx_t pot[6]; + #define POTAR_TA_MASK 0x000fffff +-#define POBAR_BA_MASK 0x000fffff +-#define POCMR_EN 0x80000000 +-#define POCMR_IO 0x40000000 /* 0--memory space 1--I/O space */ +-#define POCMR_SE 0x20000000 /* streaming enable */ +-#define POCMR_DST 0x10000000 /* 0--PCI1 1--PCI2*/ +-#define POCMR_CM_MASK 0x000fffff +-#define POCMR_CM_4G 0x00000000 +-#define POCMR_CM_2G 0x00080000 +-#define POCMR_CM_1G 0x000C0000 +-#define POCMR_CM_512M 0x000E0000 +-#define POCMR_CM_256M 0x000F0000 +-#define POCMR_CM_128M 0x000F8000 +-#define POCMR_CM_64M 0x000FC000 +-#define POCMR_CM_32M 0x000FE000 +-#define POCMR_CM_16M 0x000FF000 +-#define POCMR_CM_8M 0x000FF800 +-#define POCMR_CM_4M 0x000FFC00 +-#define POCMR_CM_2M 0x000FFE00 +-#define POCMR_CM_1M 0x000FFF00 +-#define POCMR_CM_512K 0x000FFF80 +-#define POCMR_CM_256K 0x000FFFC0 +-#define POCMR_CM_128K 0x000FFFE0 +-#define POCMR_CM_64K 0x000FFFF0 +-#define POCMR_CM_32K 0x000FFFF8 +-#define POCMR_CM_16K 0x000FFFFC +-#define POCMR_CM_8K 0x000FFFFE +-#define POCMR_CM_4K 0x000FFFFF +- u8 res0[0x60]; +- u32 pmcr; +- u8 res1[4]; +- u32 dtcr; +- u8 res2[4]; +-} ios8349_t; ++#define POBAR_BA_MASK 0x000fffff ++#define POCMR_EN 0x80000000 ++#define POCMR_IO 0x40000000 /* 0--memory space 1--I/O space */ ++#define POCMR_SE 0x20000000 /* streaming enable */ ++#define POCMR_DST 0x10000000 /* 0--PCI1 1--PCI2 */ ++#define POCMR_CM_MASK 0x000fffff ++#define POCMR_CM_4G 0x00000000 ++#define POCMR_CM_2G 0x00080000 ++#define POCMR_CM_1G 0x000C0000 ++#define POCMR_CM_512M 0x000E0000 ++#define POCMR_CM_256M 0x000F0000 ++#define POCMR_CM_128M 0x000F8000 ++#define POCMR_CM_64M 0x000FC000 ++#define POCMR_CM_32M 0x000FE000 ++#define POCMR_CM_16M 0x000FF000 ++#define POCMR_CM_8M 0x000FF800 ++#define POCMR_CM_4M 0x000FFC00 ++#define POCMR_CM_2M 0x000FFE00 ++#define POCMR_CM_1M 0x000FFF00 ++#define POCMR_CM_512K 0x000FFF80 ++#define POCMR_CM_256K 0x000FFFC0 ++#define POCMR_CM_128K 0x000FFFE0 ++#define POCMR_CM_64K 0x000FFFF0 ++#define POCMR_CM_32K 0x000FFFF8 ++#define POCMR_CM_16K 0x000FFFFC ++#define POCMR_CM_8K 0x000FFFFE ++#define POCMR_CM_4K 0x000FFFFF ++ u8 res0[0x60]; ++ u32 pmcr; ++ u8 res1[4]; ++ u32 dtcr; ++ u8 res2[4]; ++} ios83xx_t; + + /* + * PCI Controller Control and Status Registers + */ +-typedef struct pcictrl8349 { +- u32 esr; ++typedef struct pcictrl83xx { ++ u32 esr; + #define ESR_MERR 0x80000000 + #define ESR_APAR 0x00000400 +-#define ESR_PCISERR 0x00000200 +-#define ESR_MPERR 0x00000100 +-#define ESR_TPERR 0x00000080 +-#define ESR_NORSP 0x00000040 +-#define ESR_TABT 0x00000020 +- u32 ecdr; ++#define ESR_PCISERR 0x00000200 ++#define ESR_MPERR 0x00000100 ++#define ESR_TPERR 0x00000080 ++#define ESR_NORSP 0x00000040 ++#define ESR_TABT 0x00000020 ++ u32 ecdr; + #define ECDR_APAR 0x00000400 +-#define ECDR_PCISERR 0x00000200 +-#define ECDR_MPERR 0x00000100 +-#define ECDR_TPERR 0x00000080 +-#define ECDR_NORSP 0x00000040 +-#define ECDR_TABT 0x00000020 ++#define ECDR_PCISERR 0x00000200 ++#define ECDR_MPERR 0x00000100 ++#define ECDR_TPERR 0x00000080 ++#define ECDR_NORSP 0x00000040 ++#define ECDR_TABT 0x00000020 + u32 eer; + #define EER_APAR 0x00000400 +-#define EER_PCISERR 0x00000200 +-#define EER_MPERR 0x00000100 +-#define EER_TPERR 0x00000080 +-#define EER_NORSP 0x00000040 +-#define EER_TABT 0x00000020 +- u32 eatcr; +-#define EATCR_ERRTYPR_MASK 0x70000000 +-#define EATCR_ERRTYPR_APR 0x00000000 /* address parity error */ +-#define EATCR_ERRTYPR_WDPR 0x10000000 /* write data parity error */ +-#define EATCR_ERRTYPR_RDPR 0x20000000 /* read data parity error */ +-#define EATCR_ERRTYPR_MA 0x30000000 /* master abort */ +-#define EATCR_ERRTYPR_TA 0x40000000 /* target abort */ +-#define EATCR_ERRTYPR_SE 0x50000000 /* system error indication received */ +-#define EATCR_ERRTYPR_PEA 0x60000000 /* parity error indication received on a read */ +-#define EATCR_ERRTYPR_PEW 0x70000000 /* parity error indication received on a write */ ++#define EER_PCISERR 0x00000200 ++#define EER_MPERR 0x00000100 ++#define EER_TPERR 0x00000080 ++#define EER_NORSP 0x00000040 ++#define EER_TABT 0x00000020 ++ u32 eatcr; ++#define EATCR_ERRTYPR_MASK 0x70000000 ++#define EATCR_ERRTYPR_APR 0x00000000 /* address parity error */ ++#define EATCR_ERRTYPR_WDPR 0x10000000 /* write data parity error */ ++#define EATCR_ERRTYPR_RDPR 0x20000000 /* read data parity error */ ++#define EATCR_ERRTYPR_MA 0x30000000 /* master abort */ ++#define EATCR_ERRTYPR_TA 0x40000000 /* target abort */ ++#define EATCR_ERRTYPR_SE 0x50000000 /* system error indication received */ ++#define EATCR_ERRTYPR_PEA 0x60000000 /* parity error indication received on a read */ ++#define EATCR_ERRTYPR_PEW 0x70000000 /* parity error indication received on a write */ + #define EATCR_BN_MASK 0x0f000000 /* beat number */ +-#define EATCR_BN_1st 0x00000000 +-#define EATCR_BN_2ed 0x01000000 +-#define EATCR_BN_3rd 0x02000000 +-#define EATCR_BN_4th 0x03000000 +-#define EATCR_BN_5th 0x0400000 +-#define EATCR_BN_6th 0x05000000 +-#define EATCR_BN_7th 0x06000000 +-#define EATCR_BN_8th 0x07000000 +-#define EATCR_BN_9th 0x08000000 ++#define EATCR_BN_1st 0x00000000 ++#define EATCR_BN_2ed 0x01000000 ++#define EATCR_BN_3rd 0x02000000 ++#define EATCR_BN_4th 0x03000000 ++#define EATCR_BN_5th 0x0400000 ++#define EATCR_BN_6th 0x05000000 ++#define EATCR_BN_7th 0x06000000 ++#define EATCR_BN_8th 0x07000000 ++#define EATCR_BN_9th 0x08000000 + #define EATCR_TS_MASK 0x00300000 /* transaction size */ +-#define EATCR_TS_4 0x00000000 +-#define EATCR_TS_1 0x00100000 +-#define EATCR_TS_2 0x00200000 +-#define EATCR_TS_3 0x00300000 +-#define EATCR_ES_MASK 0x000f0000 /* error source */ +-#define EATCR_ES_EM 0x00000000 /* external master */ +-#define EATCR_ES_DMA 0x00050000 +-#define EATCR_CMD_MASK 0x0000f000 +-#define EATCR_HBE_MASK 0x00000f00 /* PCI high byte enable*/ +-#define EATCR_BE_MASK 0x000000f0 /* PCI byte enable */ +-#define EATCR_HPB 0x00000004 /* high parity bit */ +-#define EATCR_PB 0x00000002 /* parity bit*/ +-#define EATCR_VI 0x00000001 /* error information valid */ +- u32 eacr; +- u32 eeacr; +- u32 edlcr; +- u32 edhcr; +- u32 gcr; +- u32 ecr; +- u32 gsr; +- u8 res0[12]; +- u32 pitar2; +- u8 res1[4]; +- u32 pibar2; +- u32 piebar2; +- u32 piwar2; +- u8 res2[4]; +- u32 pitar1; +- u8 res3[4]; +- u32 pibar1; +- u32 piebar1; +- u32 piwar1; +- u8 res4[4]; +- u32 pitar0; +- u8 res5[4]; +- u32 pibar0; +- u8 res6[4]; +- u32 piwar0; +- u8 res7[132]; ++#define EATCR_TS_4 0x00000000 ++#define EATCR_TS_1 0x00100000 ++#define EATCR_TS_2 0x00200000 ++#define EATCR_TS_3 0x00300000 ++#define EATCR_ES_MASK 0x000f0000 /* error source */ ++#define EATCR_ES_EM 0x00000000 /* external master */ ++#define EATCR_ES_DMA 0x00050000 ++#define EATCR_CMD_MASK 0x0000f000 ++#if defined (CONFIG_MPC8349) ++#define EATCR_HBE_MASK 0x00000f00 /* PCI high byte enable */ ++#endif ++#define EATCR_BE_MASK 0x000000f0 /* PCI byte enable */ ++#if defined (CONFIG_MPC8349) ++#define EATCR_HPB 0x00000004 /* high parity bit */ ++#endif ++#define EATCR_PB 0x00000002 /* parity bit */ ++#define EATCR_VI 0x00000001 /* error information valid */ ++ u32 eacr; ++ u32 eeacr; ++#if defined (CONFIG_MPC8349) ++ u32 edlcr; ++ u32 edhcr; ++#elif defined (CONFIG_MPC8360) ++ u32 edcr; /* was edlcr */ ++ u8 res_edcr[0x4]; ++#endif ++ u32 gcr; ++ u32 ecr; ++ u32 gsr; ++ u8 res0[12]; ++ u32 pitar2; ++ u8 res1[4]; ++ u32 pibar2; ++ u32 piebar2; ++ u32 piwar2; ++ u8 res2[4]; ++ u32 pitar1; ++ u8 res3[4]; ++ u32 pibar1; ++ u32 piebar1; ++ u32 piwar1; ++ u8 res4[4]; ++ u32 pitar0; ++ u8 res5[4]; ++ u32 pibar0; ++ u8 res6[4]; ++ u32 piwar0; ++ u8 res7[132]; + #define PITAR_TA_MASK 0x000fffff + #define PIBAR_MASK 0xffffffff + #define PIEBAR_EBA_MASK 0x000fffff + #define PIWAR_EN 0x80000000 + #define PIWAR_PF 0x20000000 +-#define PIWAR_RTT_MASK 0x000f0000 +-#define PIWAR_RTT_NO_SNOOP 0x00040000 ++#define PIWAR_RTT_MASK 0x000f0000 ++#define PIWAR_RTT_NO_SNOOP 0x00040000 + #define PIWAR_RTT_SNOOP 0x00050000 +-#define PIWAR_WTT_MASK 0x0000f000 +-#define PIWAR_WTT_NO_SNOOP 0x00004000 ++#define PIWAR_WTT_MASK 0x0000f000 ++#define PIWAR_WTT_NO_SNOOP 0x00004000 + #define PIWAR_WTT_SNOOP 0x00005000 +-#define PIWAR_IWS_MASK 0x0000003F +-#define PIWAR_IWS_4K 0x0000000B +-#define PIWAR_IWS_8K 0x0000000C +-#define PIWAR_IWS_16K 0x0000000D +-#define PIWAR_IWS_32K 0x0000000E +-#define PIWAR_IWS_64K 0x0000000F +-#define PIWAR_IWS_128K 0x00000010 +-#define PIWAR_IWS_256K 0x00000011 +-#define PIWAR_IWS_512K 0x00000012 +-#define PIWAR_IWS_1M 0x00000013 +-#define PIWAR_IWS_2M 0x00000014 +-#define PIWAR_IWS_4M 0x00000015 +-#define PIWAR_IWS_8M 0x00000016 +-#define PIWAR_IWS_16M 0x00000017 +-#define PIWAR_IWS_32M 0x00000018 +-#define PIWAR_IWS_64M 0x00000019 +-#define PIWAR_IWS_128M 0x0000001A +-#define PIWAR_IWS_256M 0x0000001B +-#define PIWAR_IWS_512M 0x0000001C +-#define PIWAR_IWS_1G 0x0000001D +-#define PIWAR_IWS_2G 0x0000001E +-} pcictrl8349_t; ++#define PIWAR_IWS_MASK 0x0000003F ++#define PIWAR_IWS_4K 0x0000000B ++#define PIWAR_IWS_8K 0x0000000C ++#define PIWAR_IWS_16K 0x0000000D ++#define PIWAR_IWS_32K 0x0000000E ++#define PIWAR_IWS_64K 0x0000000F ++#define PIWAR_IWS_128K 0x00000010 ++#define PIWAR_IWS_256K 0x00000011 ++#define PIWAR_IWS_512K 0x00000012 ++#define PIWAR_IWS_1M 0x00000013 ++#define PIWAR_IWS_2M 0x00000014 ++#define PIWAR_IWS_4M 0x00000015 ++#define PIWAR_IWS_8M 0x00000016 ++#define PIWAR_IWS_16M 0x00000017 ++#define PIWAR_IWS_32M 0x00000018 ++#define PIWAR_IWS_64M 0x00000019 ++#define PIWAR_IWS_128M 0x0000001A ++#define PIWAR_IWS_256M 0x0000001B ++#define PIWAR_IWS_512M 0x0000001C ++#define PIWAR_IWS_1G 0x0000001D ++#define PIWAR_IWS_2G 0x0000001E ++} pcictrl83xx_t; + ++#if defined (CONFIG_MPC8349) + /* + * USB + */ +-typedef struct usb8349 { ++typedef struct usb83xx { + u8 fixme[0x2000]; +-} usb8349_t; ++} usb83xx_t; + + /* + * TSEC + */ +-typedef struct tsec8349 { ++typedef struct tsec83xx { + u8 fixme[0x1000]; +-} tsec8349_t; ++} tsec83xx_t; ++#endif + + /* + * Security + */ +-typedef struct security8349 { ++typedef struct security83xx { + u8 fixme[0x10000]; +-} security8349_t; ++} security83xx_t; ++ ++#if defined (CONFIG_MPC8360) ++/* ++ * iram ++ */ ++typedef struct iram83xx { ++ u32 iadd; /* I-RAM address register */ ++ u32 idata; /* I-RAM data register */ ++ u8 res0[0x78]; ++} iram83xx_t; ++ ++/* ++ * Interrupt Controller ++ */ ++typedef struct irq83xx { ++ u32 cicr; /* QE system interrupt configuration */ ++ u32 civec; /* QE system interrupt vector register */ ++ u32 cripnr; /* QE RISC interrupt pending register */ ++ u32 cipnr; /* QE system interrupt pending register */ ++ u32 cipxcc; /* QE interrupt priority register */ ++ u32 cipycc; /* QE interrupt priority register */ ++ u32 cipwcc; /* QE interrupt priority register */ ++ u32 cipzcc; /* QE interrupt priority register */ ++ u32 cimr; /* QE system interrupt mask register */ ++ u32 crimr; /* QE RISC interrupt mask register */ ++ u32 cicnr; /* QE system interrupt control register */ ++ u8 res0[0x4]; ++ u32 ciprta; /* QE system interrupt priority register for RISC tasks A */ ++ u32 ciprtb; /* QE system interrupt priority register for RISC tasks B */ ++ u8 res1[0x4]; ++ u32 cricr; /* QE system RISC interrupt control */ ++ u8 res2[0x20]; ++ u32 chivec; /* QE high system interrupt vector */ ++ u8 res3[0x1C]; ++} irq83xx_t; ++ ++/* ++ * Communications Processor ++ */ ++typedef struct cp83xx { ++ u32 cecr; /* QE command register */ ++ u32 ceccr; /* QE controller configuration register */ ++ u32 cecdr; /* QE command data register */ ++ u8 res0[0xA]; ++ u16 ceter; /* QE timer event register */ ++ u8 res1[0x2]; ++ u16 cetmr; /* QE timers mask register */ ++ u32 cetscr; /* QE time-stamp timer control register */ ++ u32 cetsr1; /* QE time-stamp register 1 */ ++ u32 cetsr2; /* QE time-stamp register 2 */ ++ u8 res2[0x8]; ++ u32 cevter; /* QE virtual tasks event register */ ++ u32 cevtmr; /* QE virtual tasks mask register */ ++ u16 cercr; /* QE RAM control register */ ++ u8 res3[0x2]; ++ u8 res4[0x24]; ++ u16 ceexe1; /* QE external request 1 event register */ ++ u8 res5[0x2]; ++ u16 ceexm1; /* QE external request 1 mask register */ ++ u8 res6[0x2]; ++ u16 ceexe2; /* QE external request 2 event register */ ++ u8 res7[0x2]; ++ u16 ceexm2; /* QE external request 2 mask register */ ++ u8 res8[0x2]; ++ u16 ceexe3; /* QE external request 3 event register */ ++ u8 res9[0x2]; ++ u16 ceexm3; /* QE external request 3 mask register */ ++ u8 res10[0x2]; ++ u16 ceexe4; /* QE external request 4 event register */ ++ u8 res11[0x2]; ++ u16 ceexm4; /* QE external request 4 mask register */ ++ u8 res12[0x2]; ++ u8 res13[0x280]; ++} cp83xx_t; ++ ++/* ++ * QE Multiplexer ++ */ ++ ++typedef struct qmx83xx { ++ u32 cmxgcr; /* CMX general clock route register */ ++ u32 cmxsi1cr_l; /* CMX SI1 clock route low register */ ++ u32 cmxsi1cr_h; /* CMX SI1 clock route high register */ ++ u32 cmxsi1syr; /* CMX SI1 SYNC route register */ ++ u32 cmxucr1; /* CMX UCC1, UCC3 clock route register */ ++ u32 cmxucr2; /* CMX UCC5, UCC7 clock route register */ ++ u32 cmxucr3; /* CMX UCC2, UCC4 clock route register */ ++ u32 cmxucr4; /* CMX UCC6, UCC8 clock route register */ ++ u32 cmxupcr; /* CMX UPC clock route register */ ++ u8 res0[0x1C]; ++} qmx83xx_t; ++ ++/* ++* QE Timers ++*/ ++ ++typedef struct qet83xx { ++ u8 gtcfr1; /* Timer 1 and Timer 2 global configuration register */ ++ u8 res0[0x3]; ++ u8 gtcfr2; /* Timer 3 and timer 4 global configuration register */ ++ u8 res1[0xB]; ++ u16 gtmdr1; /* Timer 1 mode register */ ++ u16 gtmdr2; /* Timer 2 mode register */ ++ u16 gtrfr1; /* Timer 1 reference register */ ++ u16 gtrfr2; /* Timer 2 reference register */ ++ u16 gtcpr1; /* Timer 1 capture register */ ++ u16 gtcpr2; /* Timer 2 capture register */ ++ u16 gtcnr1; /* Timer 1 counter */ ++ u16 gtcnr2; /* Timer 2 counter */ ++ u16 gtmdr3; /* Timer 3 mode register */ ++ u16 gtmdr4; /* Timer 4 mode register */ ++ u16 gtrfr3; /* Timer 3 reference register */ ++ u16 gtrfr4; /* Timer 4 reference register */ ++ u16 gtcpr3; /* Timer 3 capture register */ ++ u16 gtcpr4; /* Timer 4 capture register */ ++ u16 gtcnr3; /* Timer 3 counter */ ++ u16 gtcnr4; /* Timer 4 counter */ ++ u16 gtevr1; /* Timer 1 event register */ ++ u16 gtevr2; /* Timer 2 event register */ ++ u16 gtevr3; /* Timer 3 event register */ ++ u16 gtevr4; /* Timer 4 event register */ ++ u16 gtps; /* Timer 1 prescale register */ ++ u8 res2[0x46]; ++} qet83xx_t; ++ ++/* ++* spi ++*/ ++ ++typedef struct spi83xx { ++ u8 res0[0x20]; ++ u32 spmode; /* SPI mode register */ ++ u8 res1[0x2]; ++ u8 spie; /* SPI event register */ ++ u8 res2[0x1]; ++ u8 res3[0x2]; ++ u8 spim; /* SPI mask register */ ++ u8 res4[0x1]; ++ u8 res5[0x1]; ++ u8 spcom; /* SPI command register */ ++ u8 res6[0x2]; ++ u32 spitd; /* SPI transmit data register (cpu mode) */ ++ u32 spird; /* SPI receive data register (cpu mode) */ ++ u8 res7[0x8]; ++} spi83xx_t; ++ ++/* ++* mcc ++*/ ++ ++typedef struct mcc83xx { ++ u32 mcce; /* MCC event register */ ++ u32 mccm; /* MCC mask register */ ++ u32 mccf; /* MCC configuration register */ ++ u32 merl; /* MCC emergency request level register */ ++ u8 res0[0xF0]; ++} mcc83xx_t; ++ ++/* ++* brg ++*/ ++ ++typedef struct brg83xx { ++ u32 brgc1; /* BRG1 configuration register */ ++ u32 brgc2; /* BRG2 configuration register */ ++ u32 brgc3; /* BRG3 configuration register */ ++ u32 brgc4; /* BRG4 configuration register */ ++ u32 brgc5; /* BRG5 configuration register */ ++ u32 brgc6; /* BRG6 configuration register */ ++ u32 brgc7; /* BRG7 configuration register */ ++ u32 brgc8; /* BRG8 configuration register */ ++ u32 brgc9; /* BRG9 configuration register */ ++ u32 brgc10; /* BRG10 configuration register */ ++ u32 brgc11; /* BRG11 configuration register */ ++ u32 brgc12; /* BRG12 configuration register */ ++ u32 brgc13; /* BRG13 configuration register */ ++ u32 brgc14; /* BRG14 configuration register */ ++ u32 brgc15; /* BRG15 configuration register */ ++ u32 brgc16; /* BRG16 configuration register */ ++ u8 res0[0x40]; ++} brg83xx_t; ++ ++/* ++* USB ++*/ ++ ++typedef struct usb83xx { ++ u8 usmod; /* USB mode register */ ++ u8 usadd; /* USB address register */ ++ u8 uscom; /* USB command register */ ++ u8 res0[0x1]; ++ u16 usep0; /* USB endpoint register 0 */ ++ u16 usep1; /* USB endpoint register 1 */ ++ u16 usep2; /* USB endpoint register 2 */ ++ u16 usep3; /* USB endpoint register 3 */ ++ u8 res1[0x4]; ++ u16 usber; /* USB event register */ ++ u8 res2[0x2]; ++ u16 usbmr; /* USB mask register */ ++ u8 res3[0x1]; ++ u8 usbs; /* USB status register */ ++ u32 ussft; /* USB start of frame timer */ ++ u8 res4[0x24]; ++} usb83xx_t; ++ ++/* ++* SI ++*/ ++ ++typedef struct si1_83xx { ++ u16 siamr1; /* SI1 TDMA mode register */ ++ u16 sibmr1; /* SI1 TDMB mode register */ ++ u16 sicmr1; /* SI1 TDMC mode register */ ++ u16 sidmr1; /* SI1 TDMD mode register */ ++ u8 siglmr1_h; /* SI1 global mode register high */ ++ u8 res0[0x1]; ++ u8 sicmdr1_h; /* SI1 command register high */ ++ u8 res2[0x1]; ++ u8 sistr1_h; /* SI1 status register high */ ++ u8 res3[0x1]; ++ u16 sirsr1_h; /* SI1 RAM shadow address register high */ ++ u8 sitarc1; /* SI1 RAM counter Tx TDMA */ ++ u8 sitbrc1; /* SI1 RAM counter Tx TDMB */ ++ u8 sitcrc1; /* SI1 RAM counter Tx TDMC */ ++ u8 sitdrc1; /* SI1 RAM counter Tx TDMD */ ++ u8 sirarc1; /* SI1 RAM counter Rx TDMA */ ++ u8 sirbrc1; /* SI1 RAM counter Rx TDMB */ ++ u8 sircrc1; /* SI1 RAM counter Rx TDMC */ ++ u8 sirdrc1; /* SI1 RAM counter Rx TDMD */ ++ u8 res4[0x8]; ++ u16 siemr1; /* SI1 TDME mode register 16 bits */ ++ u16 sifmr1; /* SI1 TDMF mode register 16 bits */ ++ u16 sigmr1; /* SI1 TDMG mode register 16 bits */ ++ u16 sihmr1; /* SI1 TDMH mode register 16 bits */ ++ u8 siglmg1_l; /* SI1 global mode register low 8 bits */ ++ u8 res5[0x1]; ++ u8 sicmdr1_l; /* SI1 command register low 8 bits */ ++ u8 res6[0x1]; ++ u8 sistr1_l; /* SI1 status register low 8 bits */ ++ u8 res7[0x1]; ++ u16 sirsr1_l; /* SI1 RAM shadow address register low 16 bits */ ++ u8 siterc1; /* SI1 RAM counter Tx TDME 8 bits */ ++ u8 sitfrc1; /* SI1 RAM counter Tx TDMF 8 bits */ ++ u8 sitgrc1; /* SI1 RAM counter Tx TDMG 8 bits */ ++ u8 sithrc1; /* SI1 RAM counter Tx TDMH 8 bits */ ++ u8 sirerc1; /* SI1 RAM counter Rx TDME 8 bits */ ++ u8 sirfrc1; /* SI1 RAM counter Rx TDMF 8 bits */ ++ u8 sirgrc1; /* SI1 RAM counter Rx TDMG 8 bits */ ++ u8 sirhrc1; /* SI1 RAM counter Rx TDMH 8 bits */ ++ u8 res8[0x8]; ++ u32 siml1; /* SI1 multiframe limit register */ ++ u8 siedm1; /* SI1 extended diagnostic mode register */ ++ u8 res9[0xBB]; ++} si1_83xx_t; ++ ++/* ++* SI Routing Tables ++*/ ++ ++typedef struct sir83xx { ++ u8 tx[0x400]; ++ u8 rx[0x400]; ++ u8 res0[0x800]; ++} sir83xx_t; ++ ++/* ++* ucc ++*/ ++ ++typedef struct uslow { ++ u32 gumr_l; /* UCCx general mode register (low) */ ++ u32 gumr_h; /* UCCx general mode register (high) */ ++ u16 upsmr; /* UCCx protocol-specific mode register */ ++ u8 res0[0x2]; ++ u16 utodr; /* UCCx transmit on demand register */ ++ u16 udsr; /* UCCx data synchronization register */ ++ u16 ucce; /* UCCx event register */ ++ u8 res1[0x2]; ++ u16 uccm; /* UCCx mask register */ ++ u8 res2[0x1]; ++ u8 uccs; /* UCCx status register */ ++ u8 res3[0x1E8]; ++} uslow_t; ++ ++typedef struct ufast { ++ u32 gumr; /* UCCx general mode register */ ++ u32 upsmr; /* UCCx protocol-specific mode register */ ++ u16 utodr; /* UCCx transmit on demand register */ ++ u8 res0[0x2]; ++ u16 udsr; /* UCCx data synchronization register */ ++ u8 res1[0x2]; ++ u32 ucce; /* UCCx event register */ ++ u32 uccm; /* UCCx mask register. */ ++ u8 uccs; /* UCCx status register */ ++ u8 res2[0x7]; ++ u32 urfb; /* UCC receive FIFO base */ ++ u16 urfs; /* UCC receive FIFO size */ ++ u8 res3[0x2]; ++ u16 urfet; /* UCC receive FIFO emergency threshold */ ++ u16 urfset; /* UCC receive FIFO special emergency threshold */ ++ u32 utfb; /* UCC transmit FIFO base */ ++ u16 utfs; /* UCC transmit FIFO size */ ++ u8 res4[0x2]; ++ u16 utfet; /* UCC transmit FIFO emergency threshold */ ++ u8 res5[0x2]; ++ u16 utftt; /* UCC transmit FIFO transmit threshold */ ++ u8 res6[0x2]; ++ u16 utpt; /* UCC transmit polling timer */ ++ u32 urtry; /* UCC retry counter register */ ++ u8 res7[0x4C]; ++ u8 guemr; /* UCC general extended mode register */ ++ u8 res8[0x3]; ++ u8 res9[0x6C]; ++ u32 maccfg1; /* Mac configuration register #1 */ ++ u32 maccfg2; /* Mac configuration register #2 */ ++ u16 ipgifg; /* Interframe gap register */ ++ u8 res10[0x2]; ++ u32 hafdup; /* Half-duplex register */ ++ u8 res11[0xC]; ++ u32 emtr; /* Ethernet MAC test register */ ++ u32 miimcfg; /* MII mgmt configuration register */ ++ u32 miimcom; /* MII mgmt command register */ ++ u32 miimadd; /* MII mgmt address register */ ++ u32 miimcon; /* MII mgmt control register */ ++ u32 miistat; /* MII mgmt status register */ ++ u32 miimnd; /* MII mgmt indication register */ ++ u32 ifctl; /* Interface control register */ ++ u32 ifstat; /* Interface status register */ ++ u32 macstnaddr1; /* Station address part 1 register */ ++ u32 macstnaddr2; /* Station address part 2 register */ ++ u8 res12[0x8]; ++ u32 uempr; /* UCC Ethernet MAC parameter register */ ++ u32 utbipa; /* UCC TBI address */ ++ u16 uescr; /* UCC Ethernet statistics control register */ ++ u8 res13[0x26]; ++ u32 tx64; /* Transmit and receive 64-byte frame counter */ ++ u32 tx127; /* Transmit and receive 65- to 127-byte frame counter */ ++ u32 tx255; /* Transmit and receive 128- to 255-byte frame counter */ ++ u32 rx64; /* Receive and receive 64-byte frame counter */ ++ u32 rx127; /* Receive and receive 65- to 127-byte frame counter */ ++ u32 rx255; /* Receive and receive 128- to 255-byte frame counter */ ++ u32 txok; /* Transmit good bytes counter */ ++ u32 txcf; /* Transmit control frame counter */ ++ u32 tmca; /* Transmit multicast control frame counter */ ++ u32 tbca; /* Transmit broadcast packet counter */ ++ u32 rxfok; /* Receive frame OK counter */ ++ u32 rbyt; /* Receive good and bad bytes counter */ ++ u32 rxbok; /* Receive bytes OK counter */ ++ u32 rmca; /* Receive multicast packet counter */ ++ u32 rbca; /* Receive broadcast packet counter */ ++ u32 scar; /* Statistics carry register */ ++ u32 scam; /* Statistics carry mask register */ ++ u8 res14[0x3C]; ++} ufast_t; ++ ++typedef struct ucc83xx { ++ union { ++ uslow_t slow; ++ ufast_t fast; ++ }; ++} ucc83xx_t; ++ ++/* ++* MultiPHY UTOPIA POS Controllers ++*/ ++ ++typedef struct upc83xx { ++ u32 upgcr; /* UTOPIA/POS general configuration register */ ++#define UPGCR_PROTOCOL 0x80000000 /* protocol ul2 or pl2 */ ++#define UPGCR_TMS 0x40000000 /* Transmit master/slave mode */ ++#define UPGCR_RMS 0x20000000 /* Receive master/slave mode */ ++#define UPGCR_ADDR 0x10000000 /* Master MPHY Addr multiplexing: */ ++#define UPGCR_DIAG 0x01000000 /* Diagnostic mode */ ++ u32 uplpa; /* UTOPIA/POS last PHY address */ ++ u32 uphec; /* ATM HEC register */ ++ u32 upuc; /* UTOPIA/POS UCC configuration */ ++ u32 updc1; /* UTOPIA/POS device 1 configuration */ ++ u32 updc2; /* UTOPIA/POS device 2 configuration */ ++ u32 updc3; /* UTOPIA/POS device 3 configuration */ ++ u32 updc4; /* UTOPIA/POS device 4 configuration */ ++ u32 upstpa; /* UTOPIA/POS STPA threshold */ ++ u8 res0[0xC]; ++ u32 updrs1_h; /* UTOPIA/POS device 1 rate select */ ++ u32 updrs1_l; /* UTOPIA/POS device 1 rate select */ ++ u32 updrs2_h; /* UTOPIA/POS device 2 rate select */ ++ u32 updrs2_l; /* UTOPIA/POS device 2 rate select */ ++ u32 updrs3_h; /* UTOPIA/POS device 3 rate select */ ++ u32 updrs3_l; /* UTOPIA/POS device 3 rate select */ ++ u32 updrs4_h; /* UTOPIA/POS device 4 rate select */ ++ u32 updrs4_l; /* UTOPIA/POS device 4 rate select */ ++ u32 updrp1; /* UTOPIA/POS device 1 receive priority low */ ++ u32 updrp2; /* UTOPIA/POS device 2 receive priority low */ ++ u32 updrp3; /* UTOPIA/POS device 3 receive priority low */ ++ u32 updrp4; /* UTOPIA/POS device 4 receive priority low */ ++ u32 upde1; /* UTOPIA/POS device 1 event */ ++ u32 upde2; /* UTOPIA/POS device 2 event */ ++ u32 upde3; /* UTOPIA/POS device 3 event */ ++ u32 upde4; /* UTOPIA/POS device 4 event */ ++ u16 uprp1; ++ u16 uprp2; ++ u16 uprp3; ++ u16 uprp4; ++ u8 res1[0x8]; ++ u16 uptirr1_0; /* Device 1 transmit internal rate 0 */ ++ u16 uptirr1_1; /* Device 1 transmit internal rate 1 */ ++ u16 uptirr1_2; /* Device 1 transmit internal rate 2 */ ++ u16 uptirr1_3; /* Device 1 transmit internal rate 3 */ ++ u16 uptirr2_0; /* Device 2 transmit internal rate 0 */ ++ u16 uptirr2_1; /* Device 2 transmit internal rate 1 */ ++ u16 uptirr2_2; /* Device 2 transmit internal rate 2 */ ++ u16 uptirr2_3; /* Device 2 transmit internal rate 3 */ ++ u16 uptirr3_0; /* Device 3 transmit internal rate 0 */ ++ u16 uptirr3_1; /* Device 3 transmit internal rate 1 */ ++ u16 uptirr3_2; /* Device 3 transmit internal rate 2 */ ++ u16 uptirr3_3; /* Device 3 transmit internal rate 3 */ ++ u16 uptirr4_0; /* Device 4 transmit internal rate 0 */ ++ u16 uptirr4_1; /* Device 4 transmit internal rate 1 */ ++ u16 uptirr4_2; /* Device 4 transmit internal rate 2 */ ++ u16 uptirr4_3; /* Device 4 transmit internal rate 3 */ ++ u32 uper1; /* Device 1 port enable register */ ++ u32 uper2; /* Device 2 port enable register */ ++ u32 uper3; /* Device 3 port enable register */ ++ u32 uper4; /* Device 4 port enable register */ ++ u8 res2[0x150]; ++} upc83xx_t; ++ ++/* ++* SDMA ++*/ ++ ++typedef struct sdma83xx { ++ u32 sdsr; /* Serial DMA status register */ ++ u32 sdmr; /* Serial DMA mode register */ ++ u32 sdtr1; /* SDMA system bus threshold register */ ++ u32 sdtr2; /* SDMA secondary bus threshold register */ ++ u32 sdhy1; /* SDMA system bus hysteresis register */ ++ u32 sdhy2; /* SDMA secondary bus hysteresis register */ ++ u32 sdta1; /* SDMA system bus address register */ ++ u32 sdta2; /* SDMA secondary bus address register */ ++ u32 sdtm1; /* SDMA system bus MSNUM register */ ++ u32 sdtm2; /* SDMA secondary bus MSNUM register */ ++ u8 res0[0x10]; ++ u32 sdaqr; /* SDMA address bus qualify register */ ++ u32 sdaqmr; /* SDMA address bus qualify mask register */ ++ u8 res1[0x4]; ++ u32 sdwbcr; /* SDMA CAM entries base register */ ++ u8 res2[0x38]; ++} sdma83xx_t; ++ ++/* ++* Debug Space ++*/ ++ ++typedef struct dbg83xx { ++ u32 bpdcr; /* Breakpoint debug command register */ ++ u32 bpdsr; /* Breakpoint debug status register */ ++ u32 bpdmr; /* Breakpoint debug mask register */ ++ u32 bprmrr0; /* Breakpoint request mode risc register 0 */ ++ u32 bprmrr1; /* Breakpoint request mode risc register 1 */ ++ u8 res0[0x8]; ++ u32 bprmtr0; /* Breakpoint request mode trb register 0 */ ++ u32 bprmtr1; /* Breakpoint request mode trb register 1 */ ++ u8 res1[0x8]; ++ u32 bprmir; /* Breakpoint request mode immediate register */ ++ u32 bprmsr; /* Breakpoint request mode serial register */ ++ u32 bpemr; /* Breakpoint exit mode register */ ++ u8 res2[0x48]; ++} dbg83xx_t; ++ ++/* ++* RISC Special Registers (Trap and Breakpoint) ++*/ ++ ++typedef struct rsp83xx { ++ u8 fixme[0x100]; ++} rsp83xx_t; ++#endif + + typedef struct immap { +- sysconf8349_t sysconf; /* System configuration */ +- wdt8349_t wdt; /* Watch Dog Timer (WDT) Registers */ +- rtclk8349_t rtc; /* Real Time Clock Module Registers */ +- rtclk8349_t pit; /* Periodic Interval Timer */ +- gtm8349_t gtm[2]; /* Global Timers Module */ +- ipic8349_t ipic; /* Integrated Programmable Interrupt Controller */ +- arbiter8349_t arbiter; /* System Arbiter Registers */ +- reset8349_t reset; /* Reset Module */ +- clk8349_t clk; /* System Clock Module */ +- pmc8349_t pmc; /* Power Management Control Module */ +- gpio8349_t pgio[2]; /* general purpose I/O module */ ++ sysconf83xx_t sysconf; /* System configuration */ ++ wdt83xx_t wdt; /* Watch Dog Timer (WDT) Registers */ ++ rtclk83xx_t rtc; /* Real Time Clock Module Registers */ ++ rtclk83xx_t pit; /* Periodic Interval Timer */ ++ gtm83xx_t gtm[2]; /* Global Timers Module */ ++ ipic83xx_t ipic; /* Integrated Programmable Interrupt Controller */ ++ arbiter83xx_t arbiter; /* System Arbiter Registers */ ++ reset83xx_t reset; /* Reset Module */ ++ clk83xx_t clk; /* System Clock Module */ ++ pmc83xx_t pmc; /* Power Management Control Module */ ++#if defined (CONFIG_MPC8349) ++ gpio83xx_t pgio[2]; /* general purpose I/O module */ ++#elif defined (CONFIG_MPC8360) ++ qepi83xx_t qepi; /* QE Ports Interrupts Registers */ ++#endif + u8 res0[0x200]; ++#if defined (CONFIG_MPC8360) ++ u8 DLL_LBDDR[0x100]; ++#endif + u8 DDL_DDR[0x100]; + u8 DDL_LBIU[0x100]; ++#if defined (CONFIG_MPC8349) + u8 res1[0xE00]; +- ddr8349_t ddr; /* DDR Memory Controller Memory */ +- i2c_t i2c[2]; /* I2C1 Controller */ ++#elif defined (CONFIG_MPC8360) ++ u8 res1[0x200]; ++ gpio83xx_t gpio; /* General purpose I/O module */ ++ qesba83xx_t qesba; /* QE Secondary Bus Access Windows */ ++#endif ++ ddr83xx_t ddr; /* DDR Memory Controller Memory */ ++ fsl_i2c_t i2c[2]; /* I2C Controllers */ + u8 res2[0x1300]; +- duart8349_t duart[2];/* DUART */ ++ duart83xx_t duart[2]; /* DUART */ ++#if defined (CONFIG_MPC8349) + u8 res3[0x900]; +- lbus8349_t lbus; /* Local Bus Controller Registers */ ++ lbus83xx_t lbus; /* Local Bus Controller Registers */ + u8 res4[0x1000]; +- spi8349_t spi; /* Serial Peripheral Interface */ ++ spi83xx_t spi; /* Serial Peripheral Interface */ + u8 res5[0xF00]; +- dma8349_t dma; /* DMA */ +- pciconf8349_t pci_conf[2]; /* PCI Software Configuration Registers */ +- ios8349_t ios; /* Sequencer */ +- pcictrl8349_t pci_ctrl[2]; /* PCI Controller Control and Status Registers */ ++#elif defined (CONFIG_MPC8360) ++ u8 res3[0x900]; ++ lbus83xx_t lbus; /* Local Bus Controller */ ++ u8 res4[0x2000]; ++#endif ++ dma83xx_t dma; /* DMA */ ++#if defined (CONFIG_MPC8349) ++ pciconf83xx_t pci_conf[2]; /* PCI Software Configuration Registers */ ++ ios83xx_t ios; /* Sequencer */ ++ pcictrl83xx_t pci_ctrl[2]; /* PCI Controller Control and Status Registers */ + u8 res6[0x19900]; +- usb8349_t usb; +- tsec8349_t tsec[2]; ++ usb83xx_t usb; ++ tsec83xx_t tsec[2]; + u8 res7[0xA000]; +- security8349_t security; ++ security83xx_t security; ++#elif defined (CONFIG_MPC8360) ++ pciconf83xx_t pci_conf[1]; /* PCI Software Configuration Registers */ ++ u8 res_5[128]; ++ ios83xx_t ios; /* Sequencer (IOS) */ ++ pcictrl83xx_t pci_ctrl[1]; /* PCI Controller Control and Status Registers */ ++ u8 res6[0x4A00]; ++ ddr83xx_t ddr_secondary; /* Secondary DDR Memory Controller Memory Map */ ++ u8 res7[0x22000]; ++ security83xx_t security; ++ u8 res8[0xC0000]; ++ iram83xx_t iram; /* IRAM */ ++ irq83xx_t irq; /* Interrupt Controller */ ++ cp83xx_t cp; /* Communications Processor */ ++ qmx83xx_t qmx; /* QE Multiplexer */ ++ qet83xx_t qet; /* QE Timers */ ++ spi83xx_t spi[0x2]; /* spi */ ++ mcc83xx_t mcc; /* mcc */ ++ brg83xx_t brg; /* brg */ ++ usb83xx_t usb; /* USB */ ++ si1_83xx_t si1; /* SI */ ++ u8 res9[0x800]; ++ sir83xx_t sir; /* SI Routing Tables */ ++ ucc83xx_t ucc1; /* ucc1 */ ++ ucc83xx_t ucc3; /* ucc3 */ ++ ucc83xx_t ucc5; /* ucc5 */ ++ ucc83xx_t ucc7; /* ucc7 */ ++ u8 res10[0x600]; ++ upc83xx_t upc1; /* MultiPHY UTOPIA POS Controller 1 */ ++ ucc83xx_t ucc2; /* ucc2 */ ++ ucc83xx_t ucc4; /* ucc4 */ ++ ucc83xx_t ucc6; /* ucc6 */ ++ ucc83xx_t ucc8; /* ucc8 */ ++ u8 res11[0x600]; ++ upc83xx_t upc2; /* MultiPHY UTOPIA POS Controller 2 */ ++ sdma83xx_t sdma; /* SDMA */ ++ dbg83xx_t dbg; /* Debug Space */ ++ rsp83xx_t rsp[0x2]; /* RISC Special Registers (Trap and Breakpoint) */ ++ u8 res12[0x300]; ++ u8 res13[0x3A00]; ++ u8 res14[0x8000]; /* 0x108000 - 0x110000 */ ++ u8 res15[0xC000]; /* 0x110000 - 0x11C000 Multi-user RAM */ ++ u8 res16[0x24000]; /* 0x11C000 - 0x140000 */ ++ u8 res17[0xC0000]; /* 0x140000 - 0x200000 */ ++#endif + } immap_t; + +-#endif /* __IMMAP_8349__ */ ++#endif /* __IMMAP_83xx__ */ +diff -Naupr u-boot-1.1.6/include/asm-ppc/immap_qe.h u-boot-1.1.6-fsl-1/include/asm-ppc/immap_qe.h +--- u-boot-1.1.6/include/asm-ppc/immap_qe.h 1969-12-31 18:00:00.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/include/asm-ppc/immap_qe.h 2006-11-10 11:24:29.000000000 -0600 +@@ -0,0 +1,550 @@ ++/* ++ * QUICC Engine (QE) Internal Memory Map. ++ * The Internal Memory Map for devices with QE on them. This ++ * is the superset of all QE devices (8360, etc.). ++ * ++ * Copyright (c) 2006 Freescale Semiconductor, Inc. ++ * Author: Shlomi Gridih <gridish@freescale.com> ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License as published by the ++ * Free Software Foundation; either version 2 of the License, or (at your ++ * option) any later version. ++ */ ++ ++#ifndef __IMMAP_QE_H__ ++#define __IMMAP_QE_H__ ++ ++/* QE I-RAM ++*/ ++typedef struct qe_iram { ++ u32 iadd; /* I-RAM Address Register */ ++ u32 idata; /* I-RAM Data Register */ ++ u8 res0[0x78]; ++} __attribute__ ((packed)) qe_iram_t; ++ ++/* QE Interrupt Controller ++*/ ++typedef struct qe_ic { ++ u32 qicr; ++ u32 qivec; ++ u32 qripnr; ++ u32 qipnr; ++ u32 qipxcc; ++ u32 qipycc; ++ u32 qipwcc; ++ u32 qipzcc; ++ u32 qimr; ++ u32 qrimr; ++ u32 qicnr; ++ u8 res0[0x4]; ++ u32 qiprta; ++ u32 qiprtb; ++ u8 res1[0x4]; ++ u32 qricr; ++ u8 res2[0x20]; ++ u32 qhivec; ++ u8 res3[0x1C]; ++} __attribute__ ((packed)) qe_ic_t; ++ ++/* Communications Processor ++*/ ++typedef struct cp_qe { ++ u32 cecr; /* QE command register */ ++ u32 ceccr; /* QE controller configuration register */ ++ u32 cecdr; /* QE command data register */ ++ u8 res0[0xA]; ++ u16 ceter; /* QE timer event register */ ++ u8 res1[0x2]; ++ u16 cetmr; /* QE timers mask register */ ++ u32 cetscr; /* QE time-stamp timer control register */ ++ u32 cetsr1; /* QE time-stamp register 1 */ ++ u32 cetsr2; /* QE time-stamp register 2 */ ++ u8 res2[0x8]; ++ u32 cevter; /* QE virtual tasks event register */ ++ u32 cevtmr; /* QE virtual tasks mask register */ ++ u16 cercr; /* QE RAM control register */ ++ u8 res3[0x2]; ++ u8 res4[0x24]; ++ u16 ceexe1; /* QE external request 1 event register */ ++ u8 res5[0x2]; ++ u16 ceexm1; /* QE external request 1 mask register */ ++ u8 res6[0x2]; ++ u16 ceexe2; /* QE external request 2 event register */ ++ u8 res7[0x2]; ++ u16 ceexm2; /* QE external request 2 mask register */ ++ u8 res8[0x2]; ++ u16 ceexe3; /* QE external request 3 event register */ ++ u8 res9[0x2]; ++ u16 ceexm3; /* QE external request 3 mask register */ ++ u8 res10[0x2]; ++ u16 ceexe4; /* QE external request 4 event register */ ++ u8 res11[0x2]; ++ u16 ceexm4; /* QE external request 4 mask register */ ++ u8 res12[0x2]; ++ u8 res13[0x280]; ++} __attribute__ ((packed)) cp_qe_t; ++ ++/* QE Multiplexer ++*/ ++typedef struct qe_mux { ++ u32 cmxgcr; /* CMX general clock route register */ ++ u32 cmxsi1cr_l; /* CMX SI1 clock route low register */ ++ u32 cmxsi1cr_h; /* CMX SI1 clock route high register */ ++ u32 cmxsi1syr; /* CMX SI1 SYNC route register */ ++ u32 cmxucr1; /* CMX UCC1, UCC3 clock route register */ ++ u32 cmxucr2; /* CMX UCC5, UCC7 clock route register */ ++ u32 cmxucr3; /* CMX UCC2, UCC4 clock route register */ ++ u32 cmxucr4; /* CMX UCC6, UCC8 clock route register */ ++ u32 cmxupcr; /* CMX UPC clock route register */ ++ u8 res0[0x1C]; ++} __attribute__ ((packed)) qe_mux_t; ++ ++/* QE Timers ++*/ ++typedef struct qe_timers { ++ u8 gtcfr1; /* Timer 1 2 global configuration register */ ++ u8 res0[0x3]; ++ u8 gtcfr2; /* Timer 3 4 global configuration register */ ++ u8 res1[0xB]; ++ u16 gtmdr1; /* Timer 1 mode register */ ++ u16 gtmdr2; /* Timer 2 mode register */ ++ u16 gtrfr1; /* Timer 1 reference register */ ++ u16 gtrfr2; /* Timer 2 reference register */ ++ u16 gtcpr1; /* Timer 1 capture register */ ++ u16 gtcpr2; /* Timer 2 capture register */ ++ u16 gtcnr1; /* Timer 1 counter */ ++ u16 gtcnr2; /* Timer 2 counter */ ++ u16 gtmdr3; /* Timer 3 mode register */ ++ u16 gtmdr4; /* Timer 4 mode register */ ++ u16 gtrfr3; /* Timer 3 reference register */ ++ u16 gtrfr4; /* Timer 4 reference register */ ++ u16 gtcpr3; /* Timer 3 capture register */ ++ u16 gtcpr4; /* Timer 4 capture register */ ++ u16 gtcnr3; /* Timer 3 counter */ ++ u16 gtcnr4; /* Timer 4 counter */ ++ u16 gtevr1; /* Timer 1 event register */ ++ u16 gtevr2; /* Timer 2 event register */ ++ u16 gtevr3; /* Timer 3 event register */ ++ u16 gtevr4; /* Timer 4 event register */ ++ u16 gtps; /* Timer 1 prescale register */ ++ u8 res2[0x46]; ++} __attribute__ ((packed)) qe_timers_t; ++ ++/* BRG ++*/ ++typedef struct qe_brg { ++ u32 brgc1; /* BRG1 configuration register */ ++ u32 brgc2; /* BRG2 configuration register */ ++ u32 brgc3; /* BRG3 configuration register */ ++ u32 brgc4; /* BRG4 configuration register */ ++ u32 brgc5; /* BRG5 configuration register */ ++ u32 brgc6; /* BRG6 configuration register */ ++ u32 brgc7; /* BRG7 configuration register */ ++ u32 brgc8; /* BRG8 configuration register */ ++ u32 brgc9; /* BRG9 configuration register */ ++ u32 brgc10; /* BRG10 configuration register */ ++ u32 brgc11; /* BRG11 configuration register */ ++ u32 brgc12; /* BRG12 configuration register */ ++ u32 brgc13; /* BRG13 configuration register */ ++ u32 brgc14; /* BRG14 configuration register */ ++ u32 brgc15; /* BRG15 configuration register */ ++ u32 brgc16; /* BRG16 configuration register */ ++ u8 res0[0x40]; ++} __attribute__ ((packed)) qe_brg_t; ++ ++/* SPI ++*/ ++typedef struct spi { ++ u8 res0[0x20]; ++ u32 spmode; /* SPI mode register */ ++ u8 res1[0x2]; ++ u8 spie; /* SPI event register */ ++ u8 res2[0x1]; ++ u8 res3[0x2]; ++ u8 spim; /* SPI mask register */ ++ u8 res4[0x1]; ++ u8 res5[0x1]; ++ u8 spcom; /* SPI command register */ ++ u8 res6[0x2]; ++ u32 spitd; /* SPI transmit data register (cpu mode) */ ++ u32 spird; /* SPI receive data register (cpu mode) */ ++ u8 res7[0x8]; ++} __attribute__ ((packed)) spi_t; ++ ++/* SI ++*/ ++typedef struct si1 { ++ u16 siamr1; /* SI1 TDMA mode register */ ++ u16 sibmr1; /* SI1 TDMB mode register */ ++ u16 sicmr1; /* SI1 TDMC mode register */ ++ u16 sidmr1; /* SI1 TDMD mode register */ ++ u8 siglmr1_h; /* SI1 global mode register high */ ++ u8 res0[0x1]; ++ u8 sicmdr1_h; /* SI1 command register high */ ++ u8 res2[0x1]; ++ u8 sistr1_h; /* SI1 status register high */ ++ u8 res3[0x1]; ++ u16 sirsr1_h; /* SI1 RAM shadow address register high */ ++ u8 sitarc1; /* SI1 RAM counter Tx TDMA */ ++ u8 sitbrc1; /* SI1 RAM counter Tx TDMB */ ++ u8 sitcrc1; /* SI1 RAM counter Tx TDMC */ ++ u8 sitdrc1; /* SI1 RAM counter Tx TDMD */ ++ u8 sirarc1; /* SI1 RAM counter Rx TDMA */ ++ u8 sirbrc1; /* SI1 RAM counter Rx TDMB */ ++ u8 sircrc1; /* SI1 RAM counter Rx TDMC */ ++ u8 sirdrc1; /* SI1 RAM counter Rx TDMD */ ++ u8 res4[0x8]; ++ u16 siemr1; /* SI1 TDME mode register 16 bits */ ++ u16 sifmr1; /* SI1 TDMF mode register 16 bits */ ++ u16 sigmr1; /* SI1 TDMG mode register 16 bits */ ++ u16 sihmr1; /* SI1 TDMH mode register 16 bits */ ++ u8 siglmg1_l; /* SI1 global mode register low 8 bits */ ++ u8 res5[0x1]; ++ u8 sicmdr1_l; /* SI1 command register low 8 bits */ ++ u8 res6[0x1]; ++ u8 sistr1_l; /* SI1 status register low 8 bits */ ++ u8 res7[0x1]; ++ u16 sirsr1_l; /* SI1 RAM shadow address register low 16 bits */ ++ u8 siterc1; /* SI1 RAM counter Tx TDME 8 bits */ ++ u8 sitfrc1; /* SI1 RAM counter Tx TDMF 8 bits */ ++ u8 sitgrc1; /* SI1 RAM counter Tx TDMG 8 bits */ ++ u8 sithrc1; /* SI1 RAM counter Tx TDMH 8 bits */ ++ u8 sirerc1; /* SI1 RAM counter Rx TDME 8 bits */ ++ u8 sirfrc1; /* SI1 RAM counter Rx TDMF 8 bits */ ++ u8 sirgrc1; /* SI1 RAM counter Rx TDMG 8 bits */ ++ u8 sirhrc1; /* SI1 RAM counter Rx TDMH 8 bits */ ++ u8 res8[0x8]; ++ u32 siml1; /* SI1 multiframe limit register */ ++ u8 siedm1; /* SI1 extended diagnostic mode register */ ++ u8 res9[0xBB]; ++} __attribute__ ((packed)) si1_t; ++ ++/* SI Routing Tables ++*/ ++typedef struct sir { ++ u8 tx[0x400]; ++ u8 rx[0x400]; ++ u8 res0[0x800]; ++} __attribute__ ((packed)) sir_t; ++ ++/* USB Controller. ++*/ ++typedef struct usb_ctlr { ++ u8 usb_usmod; ++ u8 usb_usadr; ++ u8 usb_uscom; ++ u8 res1[1]; ++ u16 usb_usep1; ++ u16 usb_usep2; ++ u16 usb_usep3; ++ u16 usb_usep4; ++ u8 res2[4]; ++ u16 usb_usber; ++ u8 res3[2]; ++ u16 usb_usbmr; ++ u8 res4[1]; ++ u8 usb_usbs; ++ u16 usb_ussft; ++ u8 res5[2]; ++ u16 usb_usfrn; ++ u8 res6[0x22]; ++} __attribute__ ((packed)) usb_t; ++ ++/* MCC ++*/ ++typedef struct mcc { ++ u32 mcce; /* MCC event register */ ++ u32 mccm; /* MCC mask register */ ++ u32 mccf; /* MCC configuration register */ ++ u32 merl; /* MCC emergency request level register */ ++ u8 res0[0xF0]; ++} __attribute__ ((packed)) mcc_t; ++ ++/* QE UCC Slow ++*/ ++typedef struct ucc_slow { ++ u32 gumr_l; /* UCCx general mode register (low) */ ++ u32 gumr_h; /* UCCx general mode register (high) */ ++ u16 upsmr; /* UCCx protocol-specific mode register */ ++ u8 res0[0x2]; ++ u16 utodr; /* UCCx transmit on demand register */ ++ u16 udsr; /* UCCx data synchronization register */ ++ u16 ucce; /* UCCx event register */ ++ u8 res1[0x2]; ++ u16 uccm; /* UCCx mask register */ ++ u8 res2[0x1]; ++ u8 uccs; /* UCCx status register */ ++ u8 res3[0x24]; ++ u16 utpt; ++ u8 guemr; /* UCC general extended mode register */ ++ u8 res4[0x200 - 0x091]; ++} __attribute__ ((packed)) ucc_slow_t; ++ ++typedef struct ucc_ethernet { ++ u32 maccfg1; /* mac configuration reg. 1 */ ++ u32 maccfg2; /* mac configuration reg. 2 */ ++ u32 ipgifg; /* interframe gap reg. */ ++ u32 hafdup; /* half-duplex reg. */ ++ u8 res1[0x10]; ++ u32 miimcfg; /* MII management configuration reg */ ++ u32 miimcom; /* MII management command reg */ ++ u32 miimadd; /* MII management address reg */ ++ u32 miimcon; /* MII management control reg */ ++ u32 miimstat; /* MII management status reg */ ++ u32 miimind; /* MII management indication reg */ ++ u32 ifctl; /* interface control reg */ ++ u32 ifstat; /* interface statux reg */ ++ u32 macstnaddr1; /* mac station address part 1 reg */ ++ u32 macstnaddr2; /* mac station address part 2 reg */ ++ u8 res2[0x8]; ++ u32 uempr; /* UCC Ethernet Mac parameter reg */ ++ u32 utbipar; /* UCC tbi address reg */ ++ u16 uescr; /* UCC Ethernet statistics control reg */ ++ u8 res3[0x180 - 0x15A]; ++ u32 tx64; /* Total number of frames (including bad ++ * frames) transmitted that were exactly ++ * of the minimal length (64 for un tagged, ++ * 68 for tagged, or with length exactly ++ * equal to the parameter MINLength */ ++ u32 tx127; /* Total number of frames (including bad ++ * frames) transmitted that were between ++ * MINLength (Including FCS length==4) ++ * and 127 octets */ ++ u32 tx255; /* Total number of frames (including bad ++ * frames) transmitted that were between ++ * 128 (Including FCS length==4) and 255 ++ * octets */ ++ u32 rx64; /* Total number of frames received including ++ * bad frames that were exactly of the ++ * mninimal length (64 bytes) */ ++ u32 rx127; /* Total number of frames (including bad ++ * frames) received that were between ++ * MINLength (Including FCS length==4) ++ * and 127 octets */ ++ u32 rx255; /* Total number of frames (including ++ * bad frames) received that were between ++ * 128 (Including FCS length==4) and 255 ++ * octets */ ++ u32 txok; /* Total number of octets residing in frames ++ * that where involved in succesfull ++ * transmission */ ++ u16 txcf; /* Total number of PAUSE control frames ++ * transmitted by this MAC */ ++ u8 res4[0x2]; ++ u32 tmca; /* Total number of frames that were transmitted ++ * succesfully with the group address bit set ++ * that are not broadcast frames */ ++ u32 tbca; /* Total number of frames transmitted ++ * succesfully that had destination address ++ * field equal to the broadcast address */ ++ u32 rxfok; /* Total number of frames received OK */ ++ u32 rxbok; /* Total number of octets received OK */ ++ u32 rbyt; /* Total number of octets received including ++ * octets in bad frames. Must be implemented ++ * in HW because it includes octets in frames ++ * that never even reach the UCC */ ++ u32 rmca; /* Total number of frames that were received ++ * succesfully with the group address bit set ++ * that are not broadcast frames */ ++ u32 rbca; /* Total number of frames received succesfully ++ * that had destination address equal to the ++ * broadcast address */ ++ u32 scar; /* Statistics carry register */ ++ u32 scam; /* Statistics caryy mask register */ ++ u8 res5[0x200 - 0x1c4]; ++} __attribute__ ((packed)) uec_t; ++ ++/* QE UCC Fast ++*/ ++typedef struct ucc_fast { ++ u32 gumr; /* UCCx general mode register */ ++ u32 upsmr; /* UCCx protocol-specific mode register */ ++ u16 utodr; /* UCCx transmit on demand register */ ++ u8 res0[0x2]; ++ u16 udsr; /* UCCx data synchronization register */ ++ u8 res1[0x2]; ++ u32 ucce; /* UCCx event register */ ++ u32 uccm; /* UCCx mask register. */ ++ u8 uccs; /* UCCx status register */ ++ u8 res2[0x7]; ++ u32 urfb; /* UCC receive FIFO base */ ++ u16 urfs; /* UCC receive FIFO size */ ++ u8 res3[0x2]; ++ u16 urfet; /* UCC receive FIFO emergency threshold */ ++ u16 urfset; /* UCC receive FIFO special emergency ++ * threshold */ ++ u32 utfb; /* UCC transmit FIFO base */ ++ u16 utfs; /* UCC transmit FIFO size */ ++ u8 res4[0x2]; ++ u16 utfet; /* UCC transmit FIFO emergency threshold */ ++ u8 res5[0x2]; ++ u16 utftt; /* UCC transmit FIFO transmit threshold */ ++ u8 res6[0x2]; ++ u16 utpt; /* UCC transmit polling timer */ ++ u8 res7[0x2]; ++ u32 urtry; /* UCC retry counter register */ ++ u8 res8[0x4C]; ++ u8 guemr; /* UCC general extended mode register */ ++ u8 res9[0x100 - 0x091]; ++ uec_t ucc_eth; ++} __attribute__ ((packed)) ucc_fast_t; ++ ++/* QE UCC ++*/ ++typedef struct ucc_common { ++ u8 res1[0x90]; ++ u8 guemr; ++ u8 res2[0x200 - 0x091]; ++} __attribute__ ((packed)) ucc_common_t; ++ ++typedef struct ucc { ++ union { ++ ucc_slow_t slow; ++ ucc_fast_t fast; ++ ucc_common_t common; ++ }; ++} __attribute__ ((packed)) ucc_t; ++ ++/* MultiPHY UTOPIA POS Controllers (UPC) ++*/ ++typedef struct upc { ++ u32 upgcr; /* UTOPIA/POS general configuration register */ ++ u32 uplpa; /* UTOPIA/POS last PHY address */ ++ u32 uphec; /* ATM HEC register */ ++ u32 upuc; /* UTOPIA/POS UCC configuration */ ++ u32 updc1; /* UTOPIA/POS device 1 configuration */ ++ u32 updc2; /* UTOPIA/POS device 2 configuration */ ++ u32 updc3; /* UTOPIA/POS device 3 configuration */ ++ u32 updc4; /* UTOPIA/POS device 4 configuration */ ++ u32 upstpa; /* UTOPIA/POS STPA threshold */ ++ u8 res0[0xC]; ++ u32 updrs1_h; /* UTOPIA/POS device 1 rate select */ ++ u32 updrs1_l; /* UTOPIA/POS device 1 rate select */ ++ u32 updrs2_h; /* UTOPIA/POS device 2 rate select */ ++ u32 updrs2_l; /* UTOPIA/POS device 2 rate select */ ++ u32 updrs3_h; /* UTOPIA/POS device 3 rate select */ ++ u32 updrs3_l; /* UTOPIA/POS device 3 rate select */ ++ u32 updrs4_h; /* UTOPIA/POS device 4 rate select */ ++ u32 updrs4_l; /* UTOPIA/POS device 4 rate select */ ++ u32 updrp1; /* UTOPIA/POS device 1 receive priority low */ ++ u32 updrp2; /* UTOPIA/POS device 2 receive priority low */ ++ u32 updrp3; /* UTOPIA/POS device 3 receive priority low */ ++ u32 updrp4; /* UTOPIA/POS device 4 receive priority low */ ++ u32 upde1; /* UTOPIA/POS device 1 event */ ++ u32 upde2; /* UTOPIA/POS device 2 event */ ++ u32 upde3; /* UTOPIA/POS device 3 event */ ++ u32 upde4; /* UTOPIA/POS device 4 event */ ++ u16 uprp1; ++ u16 uprp2; ++ u16 uprp3; ++ u16 uprp4; ++ u8 res1[0x8]; ++ u16 uptirr1_0; /* Device 1 transmit internal rate 0 */ ++ u16 uptirr1_1; /* Device 1 transmit internal rate 1 */ ++ u16 uptirr1_2; /* Device 1 transmit internal rate 2 */ ++ u16 uptirr1_3; /* Device 1 transmit internal rate 3 */ ++ u16 uptirr2_0; /* Device 2 transmit internal rate 0 */ ++ u16 uptirr2_1; /* Device 2 transmit internal rate 1 */ ++ u16 uptirr2_2; /* Device 2 transmit internal rate 2 */ ++ u16 uptirr2_3; /* Device 2 transmit internal rate 3 */ ++ u16 uptirr3_0; /* Device 3 transmit internal rate 0 */ ++ u16 uptirr3_1; /* Device 3 transmit internal rate 1 */ ++ u16 uptirr3_2; /* Device 3 transmit internal rate 2 */ ++ u16 uptirr3_3; /* Device 3 transmit internal rate 3 */ ++ u16 uptirr4_0; /* Device 4 transmit internal rate 0 */ ++ u16 uptirr4_1; /* Device 4 transmit internal rate 1 */ ++ u16 uptirr4_2; /* Device 4 transmit internal rate 2 */ ++ u16 uptirr4_3; /* Device 4 transmit internal rate 3 */ ++ u32 uper1; /* Device 1 port enable register */ ++ u32 uper2; /* Device 2 port enable register */ ++ u32 uper3; /* Device 3 port enable register */ ++ u32 uper4; /* Device 4 port enable register */ ++ u8 res2[0x150]; ++} __attribute__ ((packed)) upc_t; ++ ++/* SDMA ++*/ ++typedef struct sdma { ++ u32 sdsr; /* Serial DMA status register */ ++ u32 sdmr; /* Serial DMA mode register */ ++ u32 sdtr1; /* SDMA system bus threshold register */ ++ u32 sdtr2; /* SDMA secondary bus threshold register */ ++ u32 sdhy1; /* SDMA system bus hysteresis register */ ++ u32 sdhy2; /* SDMA secondary bus hysteresis register */ ++ u32 sdta1; /* SDMA system bus address register */ ++ u32 sdta2; /* SDMA secondary bus address register */ ++ u32 sdtm1; /* SDMA system bus MSNUM register */ ++ u32 sdtm2; /* SDMA secondary bus MSNUM register */ ++ u8 res0[0x10]; ++ u32 sdaqr; /* SDMA address bus qualify register */ ++ u32 sdaqmr; /* SDMA address bus qualify mask register */ ++ u8 res1[0x4]; ++ u32 sdwbcr; /* SDMA CAM entries base register */ ++ u8 res2[0x38]; ++} __attribute__ ((packed)) sdma_t; ++ ++/* Debug Space ++*/ ++typedef struct dbg { ++ u32 bpdcr; /* Breakpoint debug command register */ ++ u32 bpdsr; /* Breakpoint debug status register */ ++ u32 bpdmr; /* Breakpoint debug mask register */ ++ u32 bprmrr0; /* Breakpoint request mode risc register 0 */ ++ u32 bprmrr1; /* Breakpoint request mode risc register 1 */ ++ u8 res0[0x8]; ++ u32 bprmtr0; /* Breakpoint request mode trb register 0 */ ++ u32 bprmtr1; /* Breakpoint request mode trb register 1 */ ++ u8 res1[0x8]; ++ u32 bprmir; /* Breakpoint request mode immediate register */ ++ u32 bprmsr; /* Breakpoint request mode serial register */ ++ u32 bpemr; /* Breakpoint exit mode register */ ++ u8 res2[0x48]; ++} __attribute__ ((packed)) dbg_t; ++ ++/* RISC Special Registers (Trap and Breakpoint) ++*/ ++typedef struct rsp { ++ u8 fixme[0x100]; ++} __attribute__ ((packed)) rsp_t; ++ ++typedef struct qe_immap { ++ qe_iram_t iram; /* I-RAM */ ++ qe_ic_t ic; /* Interrupt Controller */ ++ cp_qe_t cp; /* Communications Processor */ ++ qe_mux_t qmx; /* QE Multiplexer */ ++ qe_timers_t qet; /* QE Timers */ ++ spi_t spi[0x2]; /* spi */ ++ mcc_t mcc; /* mcc */ ++ qe_brg_t brg; /* brg */ ++ usb_t usb; /* USB */ ++ si1_t si1; /* SI */ ++ u8 res11[0x800]; ++ sir_t sir; /* SI Routing Tables */ ++ ucc_t ucc1; /* ucc1 */ ++ ucc_t ucc3; /* ucc3 */ ++ ucc_t ucc5; /* ucc5 */ ++ ucc_t ucc7; /* ucc7 */ ++ u8 res12[0x600]; ++ upc_t upc1; /* MultiPHY UTOPIA POS Controller 1 */ ++ ucc_t ucc2; /* ucc2 */ ++ ucc_t ucc4; /* ucc4 */ ++ ucc_t ucc6; /* ucc6 */ ++ ucc_t ucc8; /* ucc8 */ ++ u8 res13[0x600]; ++ upc_t upc2; /* MultiPHY UTOPIA POS Controller 2 */ ++ sdma_t sdma; /* SDMA */ ++ dbg_t dbg; /* Debug Space */ ++ rsp_t rsp[0x2]; /* RISC Special Registers ++ * (Trap and Breakpoint) */ ++ u8 res14[0x300]; ++ u8 res15[0x3A00]; ++ u8 res16[0x8000]; /* 0x108000 - 0x110000 */ ++ u8 muram[0xC000]; /* 0x110000 - 0x11C000 Multi-user RAM */ ++ u8 res17[0x24000]; /* 0x11C000 - 0x140000 */ ++ u8 res18[0xC0000]; /* 0x140000 - 0x200000 */ ++} __attribute__ ((packed)) qe_map_t; ++ ++extern qe_map_t *qe_immr; ++ ++#endif /* __IMMAP_QE_H__ */ +diff -Naupr u-boot-1.1.6/include/asm-ppc/processor.h u-boot-1.1.6-fsl-1/include/asm-ppc/processor.h +--- u-boot-1.1.6/include/asm-ppc/processor.h 2006-11-02 08:15:01.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/include/asm-ppc/processor.h 2006-12-06 10:33:49.000000000 -0600 +@@ -749,6 +749,7 @@ + #define PVR_405EP_RB 0x51210950 + #define PVR_440SP_RA 0x53221850 + #define PVR_440SP_RB 0x53221891 ++#define PVR_440SP_RC 0x53221892 + #define PVR_440SPe_RA 0x53421890 + #define PVR_440SPe_RB 0x53421891 + #define PVR_601 0x00010000 +diff -Naupr u-boot-1.1.6/include/common.h u-boot-1.1.6-fsl-1/include/common.h +--- u-boot-1.1.6/include/common.h 2006-11-02 08:15:01.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/include/common.h 2006-11-30 12:34:13.000000000 -0600 +@@ -270,7 +270,7 @@ int misc_init_r (void); + void jumptable_init(void); + + /* common/memsize.c */ +-int get_ram_size (volatile long *, long); ++long get_ram_size (volatile long *, long); + + /* $(BOARD)/$(BOARD).c */ + void reset_phy (void); +@@ -402,6 +402,11 @@ void ppcSync(void); + void ppcDcbz(unsigned long value); + #endif + ++#if defined (CONFIG_MPC83XX) ++void ppcDWload(unsigned int *addr, unsigned int *ret); ++void ppcDWstore(unsigned int *addr, unsigned int *value); ++#endif ++ + /* $(CPU)/cpu.c */ + int checkcpu (void); + int checkicache (void); +diff -Naupr u-boot-1.1.6/include/configs/alpr.h u-boot-1.1.6-fsl-1/include/configs/alpr.h +--- u-boot-1.1.6/include/configs/alpr.h 1969-12-31 18:00:00.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/include/configs/alpr.h 2006-11-30 12:34:13.000000000 -0600 +@@ -0,0 +1,346 @@ ++/* ++ * (C) Copyright 2006 ++ * Stefan Roese, DENX Software Engineering, sr@denx.de. ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#ifndef __CONFIG_H ++#define __CONFIG_H ++ ++/*----------------------------------------------------------------------- ++ * High Level Configuration Options ++ *----------------------------------------------------------------------*/ ++#define CONFIG_ALPR 1 /* Board is ebony */ ++#define CONFIG_440GX 1 /* Specifc GX support */ ++#define CONFIG_4xx 1 /* ... PPC4xx family */ ++#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ ++#define CONFIG_LAST_STAGE_INIT 1 /* call last_stage_init() */ ++#undef CFG_DRAM_TEST /* Disable-takes long time! */ ++#define CONFIG_SYS_CLK_FREQ 33333333 /* external freq to pll */ ++ ++/*----------------------------------------------------------------------- ++ * Base addresses -- Note these are effective addresses where the ++ * actual resources get mapped (not physical addresses) ++ *----------------------------------------------------------------------*/ ++#define CFG_SDRAM_BASE 0x00000000 /* _must_ be 0 */ ++#define CFG_FLASH_BASE 0xffe00000 /* start of FLASH */ ++#define CFG_MONITOR_BASE 0xfffc0000 /* start of monitor */ ++#define CFG_PCI_MEMBASE 0x80000000 /* mapped pci memory */ ++#define CFG_PCI_MEMSIZE 0x40000000 /* size of mapped pci memory */ ++#define CFG_PERIPHERAL_BASE 0xe0000000 /* internal peripherals */ ++#define CFG_ISRAM_BASE 0xc0000000 /* internal SRAM */ ++#define CFG_PCI_BASE 0xd0000000 /* internal PCI regs */ ++#define CFG_PCI_MEMBASE1 CFG_PCI_MEMBASE + 0x10000000 ++#define CFG_PCI_MEMBASE2 CFG_PCI_MEMBASE1 + 0x10000000 ++#define CFG_PCI_MEMBASE3 CFG_PCI_MEMBASE2 + 0x10000000 ++ ++ ++#define CFG_FPGA_BASE (CFG_PERIPHERAL_BASE + 0x08300000) ++#define CFG_NVRAM_BASE_ADDR (CFG_PERIPHERAL_BASE + 0x08000000) ++ ++/*----------------------------------------------------------------------- ++ * Initial RAM & stack pointer (placed in internal SRAM) ++ *----------------------------------------------------------------------*/ ++#define CFG_TEMP_STACK_OCM 1 ++#define CFG_OCM_DATA_ADDR CFG_ISRAM_BASE ++#define CFG_INIT_RAM_ADDR CFG_ISRAM_BASE /* Initial RAM address */ ++#define CFG_INIT_RAM_END 0x2000 /* End of used area in RAM */ ++#define CFG_GBL_DATA_SIZE 128 /* num bytes initial data */ ++ ++#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) ++#define CFG_POST_WORD_ADDR (CFG_GBL_DATA_OFFSET - 0x4) ++#define CFG_INIT_SP_OFFSET CFG_POST_WORD_ADDR ++ ++#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ ++#define CFG_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc*/ ++ ++/*----------------------------------------------------------------------- ++ * Serial Port ++ *----------------------------------------------------------------------*/ ++#undef CFG_EXT_SERIAL_CLOCK ++#define CONFIG_BAUDRATE 115200 ++#define CONFIG_UART1_CONSOLE /* define for uart1 as console */ ++ ++#define CFG_BAUDRATE_TABLE \ ++ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} ++ ++/*----------------------------------------------------------------------- ++ * FLASH related ++ *----------------------------------------------------------------------*/ ++#define CFG_FLASH_CFI 1 /* The flash is CFI compatible */ ++#define CFG_FLASH_CFI_DRIVER 1 /* Use common CFI driver */ ++#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ ++#define CFG_MAX_FLASH_SECT 512 /* max number of sectors on one chip */ ++#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */ ++#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ ++#define CFG_FLASH_QUIET_TEST 1 /* don't warn upon unknown flash */ ++ ++#define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */ ++ ++#define CFG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */ ++#define CFG_ENV_ADDR (CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE) ++#define CFG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */ ++ ++/* Address and size of Redundant Environment Sector */ ++#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR-CFG_ENV_SECT_SIZE) ++#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) ++ ++/*----------------------------------------------------------------------- ++ * DDR SDRAM ++ *----------------------------------------------------------------------*/ ++#undef CONFIG_SPD_EEPROM /* Don't use SPD EEPROM for setup */ ++#define CONFIG_SDRAM_BANK0 1 /* init onboard DDR SDRAM bank 0 */ ++#undef CONFIG_SDRAM_ECC /* enable ECC support */ ++#define CFG_SDRAM_TABLE { \ ++ {(256 << 20), 13, 0x000C4001}, /* 256MB mode 3, 13x10(4)*/ \ ++ {(64 << 20), 12, 0x00082001}} /* 64MB mode 2, 12x9(4) */ ++ ++/*----------------------------------------------------------------------- ++ * I2C ++ *----------------------------------------------------------------------*/ ++#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ ++#undef CONFIG_SOFT_I2C /* I2C bit-banged */ ++#define CFG_I2C_SPEED 100000 /* I2C speed and slave address */ ++#define CFG_I2C_SLAVE 0x7F ++#define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */ ++ ++/*----------------------------------------------------------------------- ++ * I2C EEPROM (PCF8594C) ++ *----------------------------------------------------------------------*/ ++#define CFG_I2C_EEPROM_ADDR 0x54 /* EEPROM PCF8594C */ ++#define CFG_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */ ++/* mask of address bits that overflow into the "EEPROM chip address" */ ++#define CFG_I2C_EEPROM_ADDR_OVERFLOW 0x07 ++#define CFG_EEPROM_PAGE_WRITE_BITS 3 /* The Philips PCF8594C has */ ++ /* 8 byte page write mode using */ ++ /* last 3 bits of the address */ ++#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 40 /* and takes up to 40 msec */ ++#define CFG_EEPROM_PAGE_WRITE_ENABLE ++ ++#define CONFIG_PREBOOT "echo;" \ ++ "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \ ++ "echo" ++ ++#undef CONFIG_BOOTARGS ++ ++#define CONFIG_EXTRA_ENV_SETTINGS \ ++ "netdev=eth3\0" \ ++ "hostname=alpr\0" \ ++ "nfsargs=setenv bootargs root=/dev/nfs rw " \ ++ "nfsroot=${serverip}:${rootpath}\0" \ ++ "ramargs=setenv bootargs root=/dev/ram rw\0" \ ++ "addip=setenv bootargs ${bootargs} " \ ++ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ ++ ":${hostname}:${netdev}:off panic=1\0" \ ++ "addtty=setenv bootargs ${bootargs} console=ttyS1,${baudrate} " \ ++ "mem=193M\0" \ ++ "flash_nfs=run nfsargs addip addtty;" \ ++ "bootm ${kernel_addr}\0" \ ++ "flash_self=run ramargs addip addtty;" \ ++ "bootm ${kernel_addr} ${ramdisk_addr}\0" \ ++ "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \ ++ "bootm\0" \ ++ "rootpath=/opt/projects/alpr/nfs_root\0" \ ++ "bootfile=/alpr/uImage\0" \ ++ "kernel_addr=fff00000\0" \ ++ "ramdisk_addr=fff10000\0" \ ++ "load=tftp 100000 /alpr/u-boot/u-boot.bin\0" \ ++ "update=protect off fffc0000 ffffffff;era fffc0000 ffffffff;" \ ++ "cp.b 100000 fffc0000 40000;" \ ++ "setenv filesize;saveenv\0" \ ++ "upd=run load;run update\0" \ ++ "" ++#define CONFIG_BOOTCOMMAND "run flash_self" ++ ++#define CONFIG_BOOTDELAY 2 /* autoboot after 5 seconds */ ++ ++#define CONFIG_BAUDRATE 115200 ++ ++#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ ++#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ ++ ++#define CONFIG_MII 1 /* MII PHY management */ ++#define CONFIG_NET_MULTI 1 ++#define CONFIG_PHY_ADDR 0x02 /* dummy setting, no EMAC0 used */ ++#define CONFIG_PHY1_ADDR 0x03 /* dummy setting, no EMAC1 used */ ++#define CONFIG_PHY2_ADDR 0x01 /* PHY address for EMAC2 */ ++#define CONFIG_PHY3_ADDR 0x02 /* PHY address for EMAC3 */ ++#define CONFIG_HAS_ETH0 ++#define CONFIG_HAS_ETH1 ++#define CONFIG_HAS_ETH2 ++#define CONFIG_HAS_ETH3 ++#define CONFIG_PHY_RESET 1 /* reset phy upon startup */ ++#define CONFIG_M88E1111_PHY 1 /* needed for PHY specific setup*/ ++#define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */ ++#define CFG_RX_ETH_BUFFER 32 /* Number of ethernet rx buffers & descriptors */ ++ ++#define CONFIG_NETCONSOLE /* include NetConsole support */ ++ ++#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ ++ CFG_CMD_ASKENV | \ ++ CFG_CMD_DHCP | \ ++ CFG_CMD_DIAG | \ ++ CFG_CMD_EEPROM | \ ++ CFG_CMD_ELF | \ ++ CFG_CMD_I2C | \ ++ CFG_CMD_IRQ | \ ++ CFG_CMD_MII | \ ++ CFG_CMD_NET | \ ++ CFG_CMD_NFS | \ ++ CFG_CMD_PCI | \ ++ CFG_CMD_PING | \ ++ CFG_CMD_FPGA | \ ++ CFG_CMD_NAND | \ ++ CFG_CMD_REGINFO) ++ ++/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ ++#include <cmd_confdefs.h> ++ ++#undef CONFIG_WATCHDOG /* watchdog disabled */ ++ ++/* ++ * Miscellaneous configurable options ++ */ ++#define CFG_LONGHELP /* undef to save memory */ ++#define CFG_PROMPT "=> " /* Monitor Command Prompt */ ++#if (CONFIG_COMMANDS & CFG_CMD_KGDB) ++#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ ++#else ++#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ ++#endif ++#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ ++#define CFG_MAXARGS 16 /* max number of command args */ ++#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ ++ ++#define CFG_MEMTEST_START 0x0400000 /* memtest works on */ ++#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ ++ ++#define CFG_LOAD_ADDR 0x100000 /* default load address */ ++#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */ ++ ++#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ ++ ++#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ ++#define CONFIG_LOOPW 1 /* enable loopw command */ ++#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */ ++#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ ++#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */ ++ ++#define CFG_4xx_RESET_TYPE 0x2 /* use chip reset on this board */ ++ ++/*----------------------------------------------------------------------- ++ * PCI stuff ++ *----------------------------------------------------------------------- ++ */ ++/* General PCI */ ++#define CONFIG_PCI /* include pci support */ ++#define CONFIG_PCI_PNP /* do pci plug-and-play */ ++#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ ++#define CFG_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE */ ++#define CONFIG_PCI_BOOTDELAY 1 /* enable pci bootdelay variable*/ ++ ++/* Board-specific PCI */ ++#define CFG_PCI_PRE_INIT /* enable board pci_pre_init() */ ++#define CFG_PCI_TARGET_INIT /* let board init pci target */ ++#define CFG_PCI_MASTER_INIT ++ ++#define CFG_PCI_SUBSYS_VENDORID 0x10e8 /* AMCC */ ++#define CFG_PCI_SUBSYS_DEVICEID 0xcafe /* Whatever */ ++ ++/*----------------------------------------------------------------------- ++ * FPGA stuff ++ *-----------------------------------------------------------------------*/ ++#define CONFIG_FPGA CFG_ALTERA_CYCLON2 ++#define CFG_FPGA_CHECK_CTRLC ++#define CFG_FPGA_PROG_FEEDBACK ++#define CONFIG_FPGA_COUNT 1 /* Ich habe 2 ... aber in ++ Reihe geschaltet -> sollte gehen, ++ aufpassen mit Datasize ist jetzt ++ halt doppelt so gross ... Seite 306 ++ ist das mit den multiple Device in PS ++ Mode erklaert ...*/ ++ ++/* FPGA program pin configuration */ ++#define CFG_GPIO_CLK 18 /* FPGA clk pin (cpu output) */ ++#define CFG_GPIO_DATA 19 /* FPGA data pin (cpu output) */ ++#define CFG_GPIO_STATUS 20 /* FPGA status pin (cpu input) */ ++#define CFG_GPIO_CONFIG 21 /* FPGA CONFIG pin (cpu output) */ ++#define CFG_GPIO_CON_DON 22 /* FPGA CONFIG_DONE pin (cpu input) */ ++ ++#define CFG_GPIO_SEL_DPR 14 /* cpu output */ ++#define CFG_GPIO_SEL_AVR 15 /* cpu output */ ++#define CFG_GPIO_PROG_EN 23 /* cpu output */ ++ ++/*----------------------------------------------------------------------- ++ * Definitions for GPIO setup ++ *-----------------------------------------------------------------------*/ ++#define CFG_GPIO_EREADY (0x80000000 >> 26) ++#define CFG_GPIO_REV0 (0x80000000 >> 14) ++#define CFG_GPIO_REV1 (0x80000000 >> 15) ++ ++/*----------------------------------------------------------------------- ++ * NAND-FLASH stuff ++ *-----------------------------------------------------------------------*/ ++#define CFG_MAX_NAND_DEVICE 4 ++#define NAND_MAX_CHIPS CFG_MAX_NAND_DEVICE ++#define CFG_NAND_BASE 0xF0000000 /* NAND FLASH Base Address */ ++#define CFG_NAND_BASE_LIST { CFG_NAND_BASE + 0, CFG_NAND_BASE + 2, \ ++ CFG_NAND_BASE + 4, CFG_NAND_BASE + 6 } ++#define CFG_NAND_QUIET_TEST 1 /* don't warn upon unknown NAND flash */ ++ ++/*----------------------------------------------------------------------- ++ * External Bus Controller (EBC) Setup ++ *----------------------------------------------------------------------*/ ++#define CFG_FLASH CFG_FLASH_BASE ++ ++/* Memory Bank 0 (Flash Bank 0, NOR-FLASH) initialization */ ++#define CFG_EBC_PB0AP 0x92015480 ++#define CFG_EBC_PB0CR (CFG_FLASH | 0x3A000) /* BS=2MB,BU=R/W,BW=16bit */ ++ ++/* Memory Bank 1 (NAND-FLASH) initialization */ ++#define CFG_EBC_PB1AP 0x01840380 /* TWT=3 */ ++#define CFG_EBC_PB1CR (CFG_NAND_BASE | 0x18000) /* BS=1MB,BU=R/W,BW=8bit */ ++ ++/* ++ * For booting Linux, the board info and command line data ++ * have to be in the first 8 MB of memory, since this is ++ * the maximum mapped by the Linux kernel during initialization. ++ */ ++#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ ++/*----------------------------------------------------------------------- ++ * Cache Configuration ++ */ ++#define CFG_DCACHE_SIZE 32768 /* For AMCC 440 CPUs */ ++#define CFG_CACHELINE_SIZE 32 /* ... */ ++#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ ++ ++/* ++ * Internal Definitions ++ * ++ * Boot Flags ++ */ ++#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ ++#define BOOTFLAG_WARM 0x02 /* Software reboot */ ++ ++#if (CONFIG_COMMANDS & CFG_CMD_KGDB) ++#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ ++#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ ++#endif ++#endif /* __CONFIG_H */ +diff -Naupr u-boot-1.1.6/include/configs/IceCube.h u-boot-1.1.6-fsl-1/include/configs/IceCube.h +--- u-boot-1.1.6/include/configs/IceCube.h 2006-11-02 08:15:01.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/include/configs/IceCube.h 2006-12-06 10:33:49.000000000 -0600 +@@ -172,6 +172,19 @@ + #undef CFG_IPBSPEED_133 /* define for 133MHz speed */ + #endif + #endif /* CONFIG_MPC5200 */ ++ ++/* pass open firmware flat tree */ ++#define CONFIG_OF_FLAT_TREE 1 ++#define CONFIG_OF_BOARD_SETUP 1 ++ ++/* maximum size of the flat tree (8K) */ ++#define OF_FLAT_TREE_MAX_SIZE 8192 ++ ++#define OF_CPU "PowerPC,5200@0" ++#define OF_SOC "soc5200@f0000000" ++#define OF_TBCLK (bd->bi_busfreq / 8) ++#define OF_STDOUT_PATH "/soc5200@f0000000/serial@2000" ++ + /* + * I2C configuration + */ +diff -Naupr u-boot-1.1.6/include/configs/MPC8349EMDS.h u-boot-1.1.6-fsl-1/include/configs/MPC8349EMDS.h +--- u-boot-1.1.6/include/configs/MPC8349EMDS.h 2006-11-02 08:15:01.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/include/configs/MPC8349EMDS.h 2006-11-10 11:24:30.000000000 -0600 +@@ -36,6 +36,7 @@ + */ + #define CONFIG_E300 1 /* E300 Family */ + #define CONFIG_MPC83XX 1 /* MPC83XX family */ ++#define CONFIG_MPC834X 1 /* MPC834X family */ + #define CONFIG_MPC8349 1 /* MPC8349 specific */ + #define CONFIG_MPC8349EMDS 1 /* MPC8349EMDS board specific */ + +@@ -59,9 +60,20 @@ + #endif + #endif + ++#define CFG_SCCR_INIT (SCCR_DEFAULT & (~SCCR_CLK_MASK)) ++#define CFG_SCCR_TSEC1CM SCCR_TSEC1CM_1 /* TSEC1 clock setting */ ++#define CFG_SCCR_TSEC2CM SCCR_TSEC2CM_1 /* TSEC2 clock setting */ ++#define CFG_SCCR_ENCCM SCCR_ENCCM_3 /* ENC clock setting */ ++#define CFG_SCCR_USBCM SCCR_USBCM_3 /* USB clock setting */ ++#define CFG_SCCR_VAL ( CFG_SCCR_INIT \ ++ | CFG_SCCR_TSEC1CM \ ++ | CFG_SCCR_TSEC2CM \ ++ | CFG_SCCR_ENCCM \ ++ | CFG_SCCR_USBCM ) ++ + #define CONFIG_BOARD_EARLY_INIT_F /* call board_pre_init */ + +-#define CFG_IMMRBAR 0xE0000000 ++#define CFG_IMMR 0xE0000000 + + #undef CFG_DRAM_TEST /* memory test, takes time */ + #define CFG_MEMTEST_START 0x00000000 /* memtest region */ +@@ -299,8 +311,8 @@ + #define CFG_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200} + +-#define CFG_NS16550_COM1 (CFG_IMMRBAR+0x4500) +-#define CFG_NS16550_COM2 (CFG_IMMRBAR+0x4600) ++#define CFG_NS16550_COM1 (CFG_IMMR+0x4500) ++#define CFG_NS16550_COM2 (CFG_IMMR+0x4600) + + /* Use the HUSH parser */ + #define CFG_HUSH_PARSER +@@ -308,20 +320,35 @@ + #define CFG_PROMPT_HUSH_PS2 "> " + #endif + ++/* pass open firmware flat tree */ ++#define CONFIG_OF_FLAT_TREE 1 ++#define CONFIG_OF_BOARD_SETUP 1 ++ ++/* maximum size of the flat tree (8K) */ ++#define OF_FLAT_TREE_MAX_SIZE 8192 ++ ++#define OF_CPU "PowerPC,8349@0" ++#define OF_SOC "soc8349@e0000000" ++#define OF_TBCLK (bd->bi_busfreq / 4) ++#define OF_STDOUT_PATH "/soc8349@e0000000/serial@4500" ++ + /* I2C */ + #define CONFIG_HARD_I2C /* I2C with hardware support*/ + #undef CONFIG_SOFT_I2C /* I2C bit-banged */ ++#define CONFIG_FSL_I2C ++#define CONFIG_I2C_MULTI_BUS ++#define CONFIG_I2C_CMD_TREE + #define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ + #define CFG_I2C_SLAVE 0x7F +-#define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */ ++#define CFG_I2C_NOPROBES {{0,0x69}} /* Don't probe these addrs */ + #define CFG_I2C_OFFSET 0x3000 + #define CFG_I2C2_OFFSET 0x3100 + + /* TSEC */ + #define CFG_TSEC1_OFFSET 0x24000 +-#define CFG_TSEC1 (CFG_IMMRBAR+CFG_TSEC1_OFFSET) ++#define CFG_TSEC1 (CFG_IMMR+CFG_TSEC1_OFFSET) + #define CFG_TSEC2_OFFSET 0x25000 +-#define CFG_TSEC2 (CFG_IMMRBAR+CFG_TSEC2_OFFSET) ++#define CFG_TSEC2 (CFG_IMMR+CFG_TSEC2_OFFSET) + + /* USB */ + #define CFG_USE_MPC834XSYS_USB_PHY 1 /* Use SYS board PHY */ +@@ -615,8 +642,8 @@ + #endif + + /* IMMRBAR @ 0xE0000000, PCI IO @ 0xE2000000 & BCSR @ 0xE2400000 */ +-#define CFG_IBAT5L (CFG_IMMRBAR | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +-#define CFG_IBAT5U (CFG_IMMRBAR | BATU_BL_256M | BATU_VS | BATU_VP) ++#define CFG_IBAT5L (CFG_IMMR | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) ++#define CFG_IBAT5U (CFG_IMMR | BATU_BL_256M | BATU_VS | BATU_VP) + + /* SDRAM @ 0xF0000000, stack in DCACHE 0xFDF00000 & FLASH @ 0xFE000000 */ + #define CFG_IBAT6L (0xF0000000 | BATL_PP_10 | BATL_MEMCOHERENCE) +@@ -666,11 +693,11 @@ + #define CONFIG_ETH1ADDR 00:E0:0C:00:7E:21 + #endif + +-#define CONFIG_IPADDR 192.168.205.5 ++#define CONFIG_IPADDR 192.168.1.253 + + #define CONFIG_HOSTNAME mpc8349emds +-#define CONFIG_ROOTPATH /opt/eldk/ppc_6xx +-#define CONFIG_BOOTFILE /tftpboot/tqm83xx/uImage ++#define CONFIG_ROOTPATH /nfsroot/rootfs ++#define CONFIG_BOOTFILE uImage + + #define CONFIG_SERVERIP 192.168.1.1 + #define CONFIG_GATEWAYIP 192.168.1.1 +@@ -703,14 +730,31 @@ + "bootm ${kernel_addr} ${ramdisk_addr}\0" \ + "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \ + "bootm\0" \ +- "rootpath=/opt/eldk/ppc_6xx\0" \ +- "bootfile=/tftpboot/mpc8349emds/uImage\0" \ + "load=tftp 100000 /tftpboot/mpc8349emds/u-boot.bin\0" \ + "update=protect off fe000000 fe03ffff; " \ + "era fe000000 fe03ffff; cp.b 100000 fe000000 ${filesize}\0" \ + "upd=run load;run update\0" \ ++ "fdtaddr=400000\0" \ ++ "fdtfile=mpc8349emds.dtb\0" \ + "" + ++#define CONFIG_NFSBOOTCOMMAND \ ++ "setenv bootargs root=/dev/nfs rw " \ ++ "nfsroot=$serverip:$rootpath " \ ++ "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ ++ "console=$consoledev,$baudrate $othbootargs;" \ ++ "tftp $loadaddr $bootfile;" \ ++ "tftp $fdtaddr $fdtfile;" \ ++ "bootm $loadaddr - $fdtaddr" ++ ++#define CONFIG_RAMBOOTCOMMAND \ ++ "setenv bootargs root=/dev/ram rw " \ ++ "console=$consoledev,$baudrate $othbootargs;" \ ++ "tftp $ramdiskaddr $ramdiskfile;" \ ++ "tftp $loadaddr $bootfile;" \ ++ "tftp $fdtaddr $fdtfile;" \ ++ "bootm $loadaddr $ramdiskaddr $fdtaddr" ++ + #define CONFIG_BOOTCOMMAND "run flash_self" + + #endif /* __CONFIG_H */ +diff -Naupr u-boot-1.1.6/include/configs/MPC8349ITX.h u-boot-1.1.6-fsl-1/include/configs/MPC8349ITX.h +--- u-boot-1.1.6/include/configs/MPC8349ITX.h 1969-12-31 18:00:00.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/include/configs/MPC8349ITX.h 2006-12-06 10:33:49.000000000 -0600 +@@ -0,0 +1,804 @@ ++/* ++ * Copyright (C) Freescale Semiconductor, Inc. 2006. All rights reserved. ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++/* ++ MPC8349E-mITX board configuration file ++ ++ Memory map: ++ ++ 0x0000_0000-0x0FFF_FFFF DDR SDRAM (256 MB) ++ 0x8000_0000-0x9FFF_FFFF PCI1 memory space (512 MB) ++ 0xA000_0000-0xBFFF_FFFF PCI2 memory space (512 MB) ++ 0xE000_0000-0xEFFF_FFFF IMMR (1 MB) ++ 0xE200_0000-0xE2FF_FFFF PCI1 I/O space (16 MB) ++ 0xE300_0000-0xE3FF_FFFF PCI2 I/O space (16 MB) ++ 0xF000_0000-0xF000_FFFF Compact Flash ++ 0xF001_0000-0xF001_FFFF Local bus expansion slot ++ 0xF800_0000-0xF801_FFFF GBE L2 Switch VSC7385 ++ 0xFF00_0000-0xFF7F_FFFF Alternative bank of Flash memory (8MB) ++ 0xFF80_0000-0xFFFF_FFFF Boot Flash (8 MB) ++ ++ I2C address list: ++ Align. Board ++ Bus Addr Part No. Description Length Location ++ ---------------------------------------------------------------- ++ I2C0 0x50 M24256-BWMN6P Board EEPROM 2 U64 ++ ++ I2C1 0x20 PCF8574 I2C Expander 0 U8 ++ I2C1 0x21 PCF8574 I2C Expander 0 U10 ++ I2C1 0x38 PCF8574A I2C Expander 0 U8 ++ I2C1 0x39 PCF8574A I2C Expander 0 U10 ++ I2C1 0x51 (DDR) DDR EEPROM 1 U1 ++ I2C1 0x68 DS1339 RTC 1 U68 ++ ++ Note that a given board has *either* a pair of 8574s or a pair of 8574As. ++*/ ++ ++#ifndef __CONFIG_H ++#define __CONFIG_H ++ ++#undef DEBUG ++ ++/* ++ * High Level Configuration Options ++ */ ++#define CONFIG_MPC834X /* MPC834x family (8343, 8347, 8349) */ ++#define CONFIG_MPC8349 /* MPC8349 specific */ ++ ++#define CONFIG_PCI ++ ++#define CONFIG_COMPACT_FLASH /* The CF card interface on the back of the board */ ++#define CONFIG_RTC_DS1337 ++ ++/* I2C */ ++#define CONFIG_HARD_I2C ++ ++#ifdef CONFIG_HARD_I2C ++ ++#define CONFIG_MISC_INIT_F ++#define CONFIG_MISC_INIT_R ++ ++#define CONFIG_FSL_I2C ++#define CONFIG_I2C_MULTI_BUS ++#define CONFIG_I2C_CMD_TREE ++#define CFG_I2C_OFFSET 0x3000 ++#define CFG_I2C2_OFFSET 0x3100 ++#define CFG_SPD_BUS_NUM 1 /* The I2C bus for SPD */ ++ ++#define CFG_I2C_8574_ADDR1 0x20 /* I2C1, PCF8574 */ ++#define CFG_I2C_8574_ADDR2 0x21 /* I2C1, PCF8574 */ ++#define CFG_I2C_8574A_ADDR1 0x38 /* I2C1, PCF8574A */ ++#define CFG_I2C_8574A_ADDR2 0x39 /* I2C1, PCF8574A */ ++#define CFG_I2C_EEPROM_ADDR 0x50 /* I2C0, Board EEPROM */ ++#define CFG_I2C_RTC_ADDR 0x68 /* I2C1, DS1339 RTC*/ ++#define SPD_EEPROM_ADDRESS 0x51 /* I2C1, DDR */ ++ ++#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ ++#define CFG_I2C_SLAVE 0x7F ++ ++/* Don't probe these addresses: */ ++#define CFG_I2C_NOPROBES {{1, CFG_I2C_8574_ADDR1}, \ ++ {1, CFG_I2C_8574_ADDR2}, \ ++ {1, CFG_I2C_8574A_ADDR1}, \ ++ {1, CFG_I2C_8574A_ADDR2}} ++/* Bit definitions for the 8574[A] I2C expander */ ++#define I2C_8574_REVISION 0x03 /* Board revision, 00=0.0, 01=0.1, 10=1.0 */ ++#define I2C_8574_CF 0x08 /* 1=Compact flash absent, 0=present */ ++#define I2C_8574_MPCICLKRN 0x10 /* MiniPCI Clk Run */ ++#define I2C_8574_PCI66 0x20 /* 0=33MHz PCI, 1=66MHz PCI */ ++#define I2C_8574_FLASHSIDE 0x40 /* 0=Reset vector from U4, 1=from U7*/ ++ ++#undef CONFIG_SOFT_I2C ++ ++#endif ++ ++#define CONFIG_TSEC_ENET /* tsec ethernet support */ ++#define CONFIG_ENV_OVERWRITE ++ ++#define PCI_66M ++#ifdef PCI_66M ++#define CONFIG_83XX_CLKIN 66666666 /* in Hz */ ++#else ++#define CONFIG_83XX_CLKIN 33333333 /* in Hz */ ++#endif ++ ++#ifndef CONFIG_SYS_CLK_FREQ ++#ifdef PCI_66M ++#define CONFIG_SYS_CLK_FREQ 66666666 ++#else ++#define CONFIG_SYS_CLK_FREQ 33333333 ++#endif ++#endif ++ ++#define CFG_IMMR 0xE0000000 /* The IMMR is relocated to here */ ++ ++#undef CFG_DRAM_TEST /* memory test, takes time */ ++#define CFG_MEMTEST_START 0x00003000 /* memtest region */ ++#define CFG_MEMTEST_END 0x07100000 /* only has 128M */ ++ ++/* ++ * DDR Setup ++ */ ++#undef CONFIG_DDR_ECC /* only for ECC DDR module */ ++#undef CONFIG_DDR_ECC_CMD /* use DDR ECC user commands */ ++#define CONFIG_SPD_EEPROM /* use SPD EEPROM for DDR setup*/ ++ ++/* ++ * 32-bit data path mode. ++ * ++ * Please note that using this mode for devices with the real density of 64-bit ++ * effectively reduces the amount of available memory due to the effect of ++ * wrapping around while translating address to row/columns, for example in the ++ * 256MB module the upper 128MB get aliased with contents of the lower ++ * 128MB); normally this define should be used for devices with real 32-bit ++ * data path. ++ */ ++#undef CONFIG_DDR_32BIT ++ ++#define CFG_DDR_BASE 0x00000000 /* DDR is system memory*/ ++#define CFG_SDRAM_BASE CFG_DDR_BASE ++#define CFG_DDR_SDRAM_BASE CFG_DDR_BASE ++#undef CONFIG_DDR_2T_TIMING ++#define CFG_83XX_DDR_USES_CS0 ++ ++#ifndef CONFIG_SPD_EEPROM ++/* ++ * Manually set up DDR parameters ++ */ ++ #define CFG_DDR_SIZE 256 /* Mb */ ++ #define CFG_DDR_CONFIG (CSCONFIG_EN | CSCONFIG_ROW_BIT_13 | CSCONFIG_COL_BIT_10) ++ ++ #define CFG_DDR_TIMING_1 0x26242321 ++ #define CFG_DDR_TIMING_2 0x00000800 /* P9-45, may need tuning */ ++#endif ++ ++/* FLASH on the Local Bus */ ++#define CFG_FLASH_CFI /* use the Common Flash Interface */ ++#define CFG_FLASH_CFI_DRIVER /* use the CFI driver */ ++#define CFG_FLASH_BASE 0xFE000000 /* start of FLASH */ ++#define CFG_FLASH_SIZE 16 /* FLASH size in MB */ ++#define CFG_FLASH_EMPTY_INFO ++ ++#define CFG_BR0_PRELIM (CFG_FLASH_BASE | BR_PS_16 | BR_V) ++#define CFG_OR0_PRELIM ((~(CFG_FLASH_SIZE - 1) << 20) | OR_UPM_XAM | \ ++ OR_GPCM_CSNT | OR_GPCM_ACS_0b11 | OR_GPCM_XACS | OR_GPCM_SCY_15 | \ ++ OR_GPCM_TRLX | OR_GPCM_EHTR | OR_GPCM_EAD) ++#define CFG_LBLAWBAR0_PRELIM CFG_FLASH_BASE /* Window base at flash base */ ++#define CFG_LBLAWAR0_PRELIM 0x80000017 /* 16Mb window bytes */ ++ ++/* VSC7385 on the Local Bus */ ++#define CFG_VSC7385_BASE 0xF8000000 /* start of VSC7385 */ ++ ++#define CFG_BR1_PRELIM (CFG_VSC7385_BASE | BR_PS_8 | BR_V) ++#define CFG_OR1_PRELIM (0xFFFE0000 /* 128KB */ | \ ++ OR_GPCM_CSNT | OR_GPCM_XACS | OR_GPCM_SCY_15 | \ ++ OR_GPCM_SETA | OR_GPCM_TRLX | OR_GPCM_EHTR | OR_GPCM_EAD) ++ ++#define CFG_LBLAWBAR1_PRELIM CFG_VSC7385_BASE /* Access window base at VSC7385 base */ ++#define CFG_LBLAWAR1_PRELIM 0x80000010 /* Access window size 128K */ ++ ++#define CFG_MAX_FLASH_BANKS 2 /* number of banks */ ++#define CFG_MAX_FLASH_SECT 135 /* sectors per device */ ++ ++#define CFG_FLASH_BANKS_LIST {CFG_FLASH_BASE, CFG_FLASH_BASE + 0x800000} ++ ++#undef CFG_FLASH_CHECKSUM ++#define CFG_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ ++#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ ++ ++#define CFG_LED_BASE 0xF9000000 /* start of LED and Board ID */ ++#define CFG_BR2_PRELIM (CFG_LED_BASE | BR_PS_8 | BR_V) ++#define CFG_OR2_PRELIM (0xFFE00000 /* 2MB */ | \ ++ OR_GPCM_CSNT | OR_GPCM_ACS_0b11 | OR_GPCM_XACS | \ ++ OR_GPCM_SCY_9 | \ ++ OR_GPCM_TRLX | OR_GPCM_EHTR | OR_GPCM_EAD) ++ ++#ifdef CONFIG_COMPACT_FLASH ++ ++#define CFG_CF_BASE 0xF0000000 ++ ++#define CFG_BR3_PRELIM (CFG_CF_BASE | BR_PS_16 | BR_MS_UPMA | BR_V) ++#define CFG_OR3_PRELIM (OR_UPM_AM | OR_UPM_BI) ++ ++#define CFG_LBLAWBAR2_PRELIM CFG_CF_BASE /* Window base at flash base + LED & Board ID */ ++#define CFG_LBLAWAR2_PRELIM 0x8000000F /* 64K bytes */ ++ ++#undef CONFIG_IDE_RESET ++#undef CONFIG_IDE_PREINIT ++ ++#define CFG_IDE_MAXBUS 1 ++#define CFG_IDE_MAXDEVICE 1 ++ ++#define CFG_ATA_IDE0_OFFSET 0x0000 ++#define CFG_ATA_BASE_ADDR CFG_CF_BASE ++#define CFG_ATA_DATA_OFFSET 0x0000 ++#define CFG_ATA_REG_OFFSET 0 ++#define CFG_ATA_ALT_OFFSET 0x0200 ++#define CFG_ATA_STRIDE 2 ++ ++#define ATA_RESET_TIME 1 /* If a CF card is not inserted, time out quickly */ ++ ++#endif ++ ++#define CONFIG_DOS_PARTITION ++ ++#define CFG_MID_FLASH_JUMP 0x7F000000 ++#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */ ++ ++ ++#if (CFG_MONITOR_BASE < CFG_FLASH_BASE) ++#define CFG_RAMBOOT ++#else ++#undef CFG_RAMBOOT ++#endif ++ ++#define CONFIG_L1_INIT_RAM ++#define CFG_INIT_RAM_LOCK ++#define CFG_INIT_RAM_ADDR 0xFD000000 /* Initial RAM address */ ++#define CFG_INIT_RAM_END 0x1000 /* End of used area in RAM*/ ++ ++#define CFG_GBL_DATA_SIZE 0x100 /* num bytes initial data */ ++#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) ++#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET ++ ++#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ ++#define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */ ++ ++/* ++ * Local Bus LCRR and LBCR regs ++ * LCRR: DLL bypass, Clock divider is 4 ++ * External Local Bus rate is ++ * CLKIN * HRCWL_CSB_TO_CLKIN / HRCWL_LCL_BUS_TO_SCB_CLK / LCRR_CLKDIV ++ */ ++#define CFG_LCRR (LCRR_DBYP | LCRR_CLKDIV_4) ++#define CFG_LBC_LBCR 0x00000000 ++ ++#undef CFG_LB_SDRAM /* if board has SRDAM on local bus */ ++ ++#ifdef CFG_LB_SDRAM ++/*local bus BR2, OR2 definition for SDRAM if soldered on the ADS board*/ ++/* ++ * Base Register 2 and Option Register 2 configure SDRAM. ++ * The SDRAM base address, CFG_LBC_SDRAM_BASE, is 0xf0000000. ++ * ++ * For BR2, need: ++ * Base address of 0xf0000000 = BR[0:16] = 1111 0000 0000 0000 0 ++ * port-size = 32-bits = BR2[19:20] = 11 ++ * no parity checking = BR2[21:22] = 00 ++ * SDRAM for MSEL = BR2[24:26] = 011 ++ * Valid = BR[31] = 1 ++ * ++ * 0 4 8 12 16 20 24 28 ++ * 1111 0000 0000 0000 0001 1000 0110 0001 = F0001861 ++ */ ++ ++#define CFG_LBC_SDRAM_BASE 0xf0000000 /* Localbus SDRAM */ ++#define CFG_LBC_SDRAM_SIZE 64 /* LBC SDRAM is 64MB */ ++ ++#define CFG_LBLAWBAR2_PRELIM 0xF0000000 ++#define CFG_LBLAWAR2_PRELIM 0x80000019 /* 64M */ ++ ++#define CFG_BR2_PRELIM (CFG_LBC_SDRAM_BASE | BR_PS_32 | BR_MS_SDRAM | BR_V) ++#define CFG_OR2_PRELIM (0xFC000000 /* 64 MB */ | \ ++ OR_SDRAM_XAM | \ ++ ((9 - 7) << OR_SDRAM_COLS_SHIFT) | \ ++ ((13 - 9) << OR_SDRAM_ROWS_SHIFT) | \ ++ OR_SDRAM_EAD) ++ ++#define CFG_LBC_LSRT 0x32000000 /* LB sdram refresh timer, about 6us */ ++#define CFG_LBC_MRTPR 0x20000000 /* LB refresh timer prescal, 266MHz/32*/ ++ ++/* ++ * LSDMR masks ++ */ ++#define CFG_LBC_LSDMR_RFEN (1 << (31 - 1)) ++#define CFG_LBC_LSDMR_BSMA1516 (3 << (31 - 10)) ++#define CFG_LBC_LSDMR_BSMA1617 (4 << (31 - 10)) ++#define CFG_LBC_LSDMR_RFCR5 (3 << (31 - 16)) ++#define CFG_LBC_LSDMR_RFCR8 (5 << (31 - 16)) ++#define CFG_LBC_LSDMR_RFCR16 (7 << (31 - 16)) ++#define CFG_LBC_LSDMR_PRETOACT3 (3 << (31 - 19)) ++#define CFG_LBC_LSDMR_PRETOACT6 (5 << (31 - 19)) ++#define CFG_LBC_LSDMR_PRETOACT7 (7 << (31 - 19)) ++#define CFG_LBC_LSDMR_ACTTORW3 (3 << (31 - 22)) ++#define CFG_LBC_LSDMR_ACTTORW7 (7 << (31 - 22)) ++#define CFG_LBC_LSDMR_ACTTORW6 (6 << (31 - 22)) ++#define CFG_LBC_LSDMR_BL8 (1 << (31 - 23)) ++#define CFG_LBC_LSDMR_WRC2 (2 << (31 - 27)) ++#define CFG_LBC_LSDMR_WRC3 (3 << (31 - 27)) ++#define CFG_LBC_LSDMR_WRC4 (0 << (31 - 27)) ++#define CFG_LBC_LSDMR_BUFCMD (1 << (31 - 29)) ++#define CFG_LBC_LSDMR_CL3 (3 << (31 - 31)) ++ ++#define CFG_LBC_LSDMR_OP_NORMAL (0 << (31 - 4)) ++#define CFG_LBC_LSDMR_OP_ARFRSH (1 << (31 - 4)) ++#define CFG_LBC_LSDMR_OP_SRFRSH (2 << (31 - 4)) ++#define CFG_LBC_LSDMR_OP_MRW (3 << (31 - 4)) ++#define CFG_LBC_LSDMR_OP_PRECH (4 << (31 - 4)) ++#define CFG_LBC_LSDMR_OP_PCHALL (5 << (31 - 4)) ++#define CFG_LBC_LSDMR_OP_ACTBNK (6 << (31 - 4)) ++#define CFG_LBC_LSDMR_OP_RWINV (7 << (31 - 4)) ++ ++#define CFG_LBC_LSDMR_COMMON ( CFG_LBC_LSDMR_RFEN \ ++ | CFG_LBC_LSDMR_BSMA1516 \ ++ | CFG_LBC_LSDMR_RFCR8 \ ++ | CFG_LBC_LSDMR_PRETOACT6 \ ++ | CFG_LBC_LSDMR_ACTTORW3 \ ++ | CFG_LBC_LSDMR_BL8 \ ++ | CFG_LBC_LSDMR_WRC3 \ ++ | CFG_LBC_LSDMR_CL3 \ ++ ) ++ ++/* ++ * SDRAM Controller configuration sequence. ++ */ ++#define CFG_LBC_LSDMR_1 ( CFG_LBC_LSDMR_COMMON \ ++ | CFG_LBC_LSDMR_OP_PCHALL) ++#define CFG_LBC_LSDMR_2 ( CFG_LBC_LSDMR_COMMON \ ++ | CFG_LBC_LSDMR_OP_ARFRSH) ++#define CFG_LBC_LSDMR_3 ( CFG_LBC_LSDMR_COMMON \ ++ | CFG_LBC_LSDMR_OP_ARFRSH) ++#define CFG_LBC_LSDMR_4 ( CFG_LBC_LSDMR_COMMON \ ++ | CFG_LBC_LSDMR_OP_MRW) ++#define CFG_LBC_LSDMR_5 ( CFG_LBC_LSDMR_COMMON \ ++ | CFG_LBC_LSDMR_OP_NORMAL) ++#endif ++ ++/* ++ * Serial Port ++ */ ++#define CONFIG_CONS_INDEX 1 ++#undef CONFIG_SERIAL_SOFTWARE_FIFO ++#define CFG_NS16550 ++#define CFG_NS16550_SERIAL ++#define CFG_NS16550_REG_SIZE 1 ++#define CFG_NS16550_CLK get_bus_freq(0) ++ ++#define CFG_BAUDRATE_TABLE \ ++ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200} ++ ++#define CFG_NS16550_COM1 (CFG_IMMR + 0x4500) ++#define CFG_NS16550_COM2 (CFG_IMMR + 0x4600) ++ ++/* Use the HUSH parser */ ++#define CFG_HUSH_PARSER ++#ifdef CFG_HUSH_PARSER ++#define CFG_PROMPT_HUSH_PS2 "> " ++#endif ++ ++/* pass open firmware flat tree */ ++#define CONFIG_OF_FLAT_TREE 1 ++#define CONFIG_OF_BOARD_SETUP 1 ++ ++/* maximum size of the flat tree (8K) */ ++#define OF_FLAT_TREE_MAX_SIZE 8192 ++ ++#define OF_CPU "PowerPC,8349@0" ++#define OF_SOC "soc8349@e0000000" ++#define OF_TBCLK (bd->bi_busfreq / 4) ++#define OF_STDOUT_PATH "/soc8349@e0000000/serial@4500" ++ ++#ifdef CONFIG_PCI ++ ++#define CONFIG_MPC83XX_PCI2 ++ ++/* ++ * General PCI ++ * Addresses are mapped 1-1. ++ */ ++#define CFG_PCI1_MEM_BASE 0x80000000 ++#define CFG_PCI1_MEM_PHYS CFG_PCI1_MEM_BASE ++#define CFG_PCI1_MEM_SIZE 0x10000000 /* 256M */ ++#define CFG_PCI1_MMIO_BASE (CFG_PCI1_MEM_BASE + CFG_PCI1_MEM_SIZE) ++#define CFG_PCI1_MMIO_PHYS CFG_PCI1_MMIO_BASE ++#define CFG_PCI1_MMIO_SIZE 0x10000000 /* 256M */ ++#define CFG_PCI1_IO_BASE 0x00000000 ++#define CFG_PCI1_IO_PHYS 0xE2000000 ++#define CFG_PCI1_IO_SIZE 0x01000000 /* 16M */ ++ ++#ifdef CONFIG_MPC83XX_PCI2 ++#define CFG_PCI2_MEM_BASE (CFG_PCI1_MMIO_BASE + CFG_PCI1_MMIO_SIZE) ++#define CFG_PCI2_MEM_PHYS CFG_PCI2_MEM_BASE ++#define CFG_PCI2_MEM_SIZE 0x10000000 /* 256M */ ++#define CFG_PCI2_MMIO_BASE (CFG_PCI2_MEM_BASE + CFG_PCI2_MEM_SIZE) ++#define CFG_PCI2_MMIO_PHYS CFG_PCI2_MMIO_BASE ++#define CFG_PCI2_MMIO_SIZE 0x10000000 /* 256M */ ++#define CFG_PCI2_IO_BASE 0x00000000 ++#define CFG_PCI2_IO_PHYS (CFG_PCI1_IO_PHYS + CFG_PCI1_IO_SIZE) ++#define CFG_PCI2_IO_SIZE 0x01000000 /* 16M */ ++#endif ++ ++#define _IO_BASE 0x00000000 /* points to PCI I/O space */ ++ ++#define CONFIG_NET_MULTI ++#define CONFIG_PCI_PNP /* do pci plug-and-play */ ++ ++#ifdef CONFIG_RTL8139 ++/* This macro is used by RTL8139 but not defined in PPC architecture */ ++#define KSEG1ADDR(x) (x) ++#endif ++ ++#ifndef CONFIG_PCI_PNP ++ #define PCI_ENET0_IOADDR 0x00000000 ++ #define PCI_ENET0_MEMADDR CFG_PCI2_MEM_BASE ++ #define PCI_IDSEL_NUMBER 0x0f /* IDSEL = AD15 */ ++#endif ++ ++#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ ++ ++#endif ++ ++/* TSEC */ ++ ++#ifdef CONFIG_TSEC_ENET ++ ++#ifndef CONFIG_NET_MULTI ++#define CONFIG_NET_MULTI ++#endif ++ ++#define CONFIG_MII ++#define CONFIG_PHY_GIGE /* In case CFG_CMD_MII is specified */ ++ ++#define CONFIG_MPC83XX_TSEC1 ++ ++#ifdef CONFIG_MPC83XX_TSEC1 ++#define CONFIG_MPC83XX_TSEC1_NAME "TSEC0" ++#define CFG_TSEC1_OFFSET 0x24000 ++#define TSEC1_PHY_ADDR 0x1c /* VSC8201 uses address 0x1c */ ++#define TSEC1_PHYIDX 0 ++#endif ++ ++#ifdef CONFIG_MPC83XX_TSEC2 ++#define CONFIG_MPC83XX_TSEC2_NAME "TSEC1" ++#define CFG_TSEC2_OFFSET 0x25000 ++#define CONFIG_UNKNOWN_TSEC /* TSEC2 is proprietary */ ++#define TSEC2_PHY_ADDR 4 ++#define TSEC2_PHYIDX 0 ++#endif ++ ++#define CONFIG_ETHPRIME "Freescale TSEC" ++ ++#endif ++ ++ ++/* ++ * Environment ++ */ ++#ifndef CFG_RAMBOOT ++ #define CFG_ENV_IS_IN_FLASH ++ #define CFG_ENV_ADDR (CFG_MONITOR_BASE + 0x40000) ++ #define CFG_ENV_SECT_SIZE 0x20000 /* 128K(one sector) for env */ ++ #define CFG_ENV_SIZE 0x2000 ++#else ++ #define CFG_NO_FLASH /* Flash is not usable now */ ++ #define CFG_ENV_IS_NOWHERE /* Store ENV in memory only */ ++ #define CFG_ENV_ADDR (CFG_MONITOR_BASE - 0x1000) ++ #define CFG_ENV_SIZE 0x2000 ++#endif ++ ++#define CONFIG_LOADS_ECHO /* echo on for serial download */ ++#define CFG_LOADS_BAUD_CHANGE /* allow baudrate change */ ++ ++/* CONFIG_COMMANDS */ ++ ++#ifdef CONFIG_COMPACT_FLASH ++#define CONFIG_COMMANDS_CF (CFG_CMD_IDE | CFG_CMD_FAT) ++#else ++#define CONFIG_COMMANDS_CF 0 ++#endif ++ ++#ifdef CONFIG_PCI ++#define CONFIG_COMMANDS_PCI CFG_CMD_PCI ++#else ++#define CONFIG_COMMANDS_PCI 0 ++#endif ++ ++#ifdef CONFIG_HARD_I2C ++#define CONFIG_COMMANDS_I2C CFG_CMD_I2C ++#else ++#define CONFIG_COMMANDS_I2C 0 ++#endif ++ ++#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ ++ CONFIG_COMMANDS_CF | \ ++ CFG_CMD_NET | \ ++ CFG_CMD_PING | \ ++ CONFIG_COMMANDS_I2C | \ ++ CONFIG_COMMANDS_PCI | \ ++ CFG_CMD_SDRAM | \ ++ CFG_CMD_DATE | \ ++ CFG_CMD_CACHE | \ ++ CFG_CMD_IRQ) ++#include <cmd_confdefs.h> ++ ++/* Watchdog */ ++ ++#undef CONFIG_WATCHDOG /* watchdog disabled */ ++#ifdef CONFIG_WATCHDOG ++#define CFG_WATCHDOG_VALUE 0xFFFFFFC3 ++#endif ++ ++/* ++ * Miscellaneous configurable options ++ */ ++#define CFG_LONGHELP /* undef to save memory */ ++#define CFG_LOAD_ADDR 0x2000000 /* default load address */ ++#define CFG_PROMPT "MPC8349E-mITX> " /* Monitor Command Prompt */ ++ ++#if (CONFIG_COMMANDS & CFG_CMD_KGDB) ++ #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ ++#else ++ #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ ++#endif ++ ++#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16) /* Print Buffer Size */ ++#define CFG_MAXARGS 16 /* max number of command args */ ++#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ ++#define CFG_HZ 1000 /* decrementer freq: 1ms ticks */ ++ ++/* ++ * For booting Linux, the board info and command line data ++ * have to be in the first 8 MB of memory, since this is ++ * the maximum mapped by the Linux kernel during initialization. ++ */ ++#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/ ++ ++/* Cache Configuration */ ++#define CFG_DCACHE_SIZE 32768 ++#define CFG_CACHELINE_SIZE 32 ++#if (CONFIG_COMMANDS & CFG_CMD_KGDB) ++#define CFG_CACHELINE_SHIFT 5 /* log2 of the above value */ ++#endif ++ ++#define CFG_RCWH_PCIHOST 0x80000000 /* PCIHOST */ ++ ++#define CFG_HRCW_LOW (\ ++ HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\ ++ HRCWL_DDR_TO_SCB_CLK_1X1 |\ ++ HRCWL_CSB_TO_CLKIN_4X1 |\ ++ HRCWL_VCO_1X2 |\ ++ HRCWL_CORE_TO_CSB_2X1) ++ ++#ifdef PCI_64BIT ++#define CFG_HRCW_HIGH (\ ++ HRCWH_PCI_HOST |\ ++ HRCWH_64_BIT_PCI |\ ++ HRCWH_PCI1_ARBITER_ENABLE |\ ++ HRCWH_PCI2_ARBITER_DISABLE |\ ++ HRCWH_CORE_ENABLE |\ ++ HRCWH_FROM_0X00000100 |\ ++ HRCWH_BOOTSEQ_DISABLE |\ ++ HRCWH_SW_WATCHDOG_DISABLE |\ ++ HRCWH_ROM_LOC_LOCAL_16BIT |\ ++ HRCWH_TSEC1M_IN_GMII |\ ++ HRCWH_TSEC2M_IN_GMII ) ++#else ++#define CFG_HRCW_HIGH (\ ++ HRCWH_PCI_HOST |\ ++ HRCWH_32_BIT_PCI |\ ++ HRCWH_PCI1_ARBITER_ENABLE |\ ++ HRCWH_PCI2_ARBITER_DISABLE |\ ++ HRCWH_CORE_ENABLE |\ ++ HRCWH_FROM_0XFFF00100 |\ ++ HRCWH_BOOTSEQ_DISABLE |\ ++ HRCWH_SW_WATCHDOG_DISABLE |\ ++ HRCWH_ROM_LOC_LOCAL_16BIT |\ ++ HRCWH_TSEC1M_IN_GMII |\ ++ HRCWH_TSEC2M_IN_GMII ) ++#endif ++ ++/* System performance */ ++#define CFG_ACR_PIPE_DEP 3 /* Arbiter pipeline depth (0-3) */ ++#define CFG_ACR_RPTCNT 3 /* Arbiter repeat count (0-7) */ ++#define CFG_SPCR_TSEC1EP 3 /* TSEC1 emergency priority (0-3) */ ++#define CFG_SPCR_TSEC2EP 3 /* TSEC2 emergency priority (0-3) */ ++#define CFG_SCCR_TSEC1CM 1 /* TSEC1 clock mode (0-3) */ ++#define CFG_SCCR_TSEC2CM 1 /* TSEC2 & I2C0 clock mode (0-3) */ ++#define CFG_ACR_RPTCNT 3 /* Arbiter repeat count */ ++ ++/* System IO Config */ ++#define CFG_SICRH SICRH_TSOBI1 /* Needed for gigabit to work on TSEC 1 */ ++#define CFG_SICRL (SICRL_LDP_A | SICRL_USB1) ++ ++#define CFG_HID0_INIT 0x000000000 ++ ++#define CFG_HID0_FINAL CFG_HID0_INIT ++ ++#define CFG_HID2 HID2_HBE ++ ++/* DDR @ 0x00000000 */ ++#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) ++#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) ++ ++/* PCI @ 0x80000000 */ ++#ifdef CONFIG_PCI ++#define CFG_IBAT1L (CFG_PCI1_MEM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) ++#define CFG_IBAT1U (CFG_PCI1_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) ++#define CFG_IBAT2L (CFG_PCI1_MMIO_BASE | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) ++#define CFG_IBAT2U (CFG_PCI1_MMIO_BASE | BATU_BL_256M | BATU_VS | BATU_VP) ++#else ++#define CFG_IBAT1L 0 ++#define CFG_IBAT1U 0 ++#define CFG_IBAT2L 0 ++#define CFG_IBAT2U 0 ++#endif ++ ++#ifdef CONFIG_MPC83XX_PCI2 ++#define CFG_IBAT3L (CFG_PCI2_MEM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) ++#define CFG_IBAT3U (CFG_PCI2_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) ++#define CFG_IBAT4L (CFG_PCI2_MMIO_BASE | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) ++#define CFG_IBAT4U (CFG_PCI2_MMIO_BASE | BATU_BL_256M | BATU_VS | BATU_VP) ++#else ++#define CFG_IBAT3L 0 ++#define CFG_IBAT3U 0 ++#define CFG_IBAT4L 0 ++#define CFG_IBAT4U 0 ++#endif ++ ++/* IMMRBAR @ 0xE0000000, PCI IO @ 0xE2000000 & BCSR @ 0xE2400000 */ ++#define CFG_IBAT5L (CFG_IMMR | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) ++#define CFG_IBAT5U (CFG_IMMR | BATU_BL_256M | BATU_VS | BATU_VP) ++ ++/* SDRAM @ 0xF0000000, stack in DCACHE 0xFDF00000 & FLASH @ 0xFE000000 */ ++#define CFG_IBAT6L (0xF0000000 | BATL_PP_10 | BATL_MEMCOHERENCE) ++#define CFG_IBAT6U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP) ++ ++#define CFG_IBAT7L 0 ++#define CFG_IBAT7U 0 ++ ++#define CFG_DBAT0L CFG_IBAT0L ++#define CFG_DBAT0U CFG_IBAT0U ++#define CFG_DBAT1L CFG_IBAT1L ++#define CFG_DBAT1U CFG_IBAT1U ++#define CFG_DBAT2L CFG_IBAT2L ++#define CFG_DBAT2U CFG_IBAT2U ++#define CFG_DBAT3L CFG_IBAT3L ++#define CFG_DBAT3U CFG_IBAT3U ++#define CFG_DBAT4L CFG_IBAT4L ++#define CFG_DBAT4U CFG_IBAT4U ++#define CFG_DBAT5L CFG_IBAT5L ++#define CFG_DBAT5U CFG_IBAT5U ++#define CFG_DBAT6L CFG_IBAT6L ++#define CFG_DBAT6U CFG_IBAT6U ++#define CFG_DBAT7L CFG_IBAT7L ++#define CFG_DBAT7U CFG_IBAT7U ++ ++/* ++ * Internal Definitions ++ * ++ * Boot Flags ++ */ ++#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ ++#define BOOTFLAG_WARM 0x02 /* Software reboot */ ++ ++#if (CONFIG_COMMANDS & CFG_CMD_KGDB) ++#define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */ ++#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ ++#endif ++ ++ ++/* ++ * Environment Configuration ++ */ ++#define CONFIG_ENV_OVERWRITE ++ ++#ifdef CONFIG_MPC83XX_TSEC1 ++#define CONFIG_ETHADDR 00:E0:0C:00:8C:01 ++#endif ++ ++#ifdef CONFIG_MPC83XX_TSEC2 ++#define CONFIG_HAS_ETH1 ++#define CONFIG_ETH1ADDR 00:E0:0C:00:8C:02 ++#endif ++ ++#if 1 ++#define CONFIG_IPADDR 10.82.19.159 ++#define CONFIG_SERVERIP 10.82.48.106 ++#define CONFIG_GATEWAYIP 10.82.19.254 ++#define CONFIG_NETMASK 255.255.252.0 ++#define CONFIG_NETDEV eth0 ++ ++#define CONFIG_HOSTNAME mpc8349emitx ++#define CONFIG_ROOTPATH /nfsroot0/u/timur/itx-ltib/rootfs ++#define CONFIG_BOOTFILE timur/uImage ++ ++#define CONFIG_UBOOTPATH timur/u-boot.bin ++#else ++#define CONFIG_IPADDR 192.168.1.253 ++#define CONFIG_SERVERIP 192.168.1.1 ++#define CONFIG_GATEWAYIP 192.168.1.1 ++#define CONFIG_NETMASK 255.255.252.0 ++#define CONFIG_NETDEV eth0 ++ ++#define CONFIG_HOSTNAME mpc8349emitx ++#define CONFIG_ROOTPATH /nfsroot/rootfs ++#define CONFIG_BOOTFILE uImage ++ ++#define CONFIG_UBOOTPATH u-boot.bin ++#endif ++ ++#define CONFIG_UBOOTSTART fe700000 ++#define CONFIG_UBOOTEND fe77ffff ++ ++#define CONFIG_LOADADDR 200000 /* default location for tftp and bootm */ ++ ++#define CONFIG_BAUDRATE 115200 ++ ++#undef CONFIG_BOOTCOMMAND ++#ifdef CONFIG_BOOTCOMMAND ++#define CONFIG_BOOTDELAY 6 ++#else ++#define CONFIG_BOOTDELAY -1 /* -1 disables auto-boot */ ++#endif ++ ++#define XMK_STR(x) #x ++#define MK_STR(x) XMK_STR(x) ++ ++#define CONFIG_BOOTARGS \ ++ "root=/dev/nfs rw" \ ++ " nfsroot=" MK_STR(CONFIG_SERVERIP) ":" MK_STR(CONFIG_ROOTPATH) \ ++ " ip=" MK_STR(CONFIG_IPADDR) ":" MK_STR(CONFIG_SERVERIP) ":" \ ++ MK_STR(CONFIG_GATEWAYIP) ":" MK_STR(CONFIG_NETMASK) ":" \ ++ MK_STR(CONFIG_HOSTNAME) ":" MK_STR(CONFIG_NETDEV) ":off" \ ++ " console=ttyS0," MK_STR(CONFIG_BAUDRATE) ++ ++#define CONFIG_EXTRA_ENV_SETTINGS \ ++ "netdev=" MK_STR(CONFIG_NETDEV) "\0" \ ++ "tftpflash=tftpboot $loadaddr " MK_STR(CONFIG_UBOOTPATH) "; " \ ++ "erase " MK_STR(CONFIG_UBOOTSTART) " " MK_STR(CONFIG_UBOOTEND) "; " \ ++ "cp.b $loadaddr " MK_STR(CONFIG_UBOOTSTART) " $filesize; " \ ++ "cmp.b $loadaddr " MK_STR(CONFIG_UBOOTSTART) " $filesize\0" \ ++ "tftpupdate=tftpboot $loadaddr " MK_STR(CONFIG_UBOOTPATH) "; " \ ++ "protect off FEF00000 FEF7FFFF; " \ ++ "erase FEF00000 FEF7FFFF; " \ ++ "cp.b $loadaddr FEF00000 $filesize; " \ ++ "protect on FEF00000 FEF7FFFF; " \ ++ "cmp.b $loadaddr FEF00000 $filesize\0" \ ++ "tftplinux=tftpboot $loadaddr $bootfile; bootm\0" \ ++ "copyuboot=erase " MK_STR(CONFIG_UBOOTSTART) " " MK_STR(CONFIG_UBOOTEND) "; " \ ++ "cp.b fef00000 " MK_STR(CONFIG_UBOOTSTART) " 80000\0" \ ++ "fdtaddr=400000\0" \ ++ "fdtfile=mpc8349emitx.dtb\0" \ ++ "" ++ ++#define CONFIG_NFSBOOTCOMMAND \ ++ "setenv bootargs root=/dev/nfs rw " \ ++ "nfsroot=$serverip:$rootpath " \ ++ "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ ++ "console=$consoledev,$baudrate $othbootargs;" \ ++ "tftp $loadaddr $bootfile;" \ ++ "tftp $fdtaddr $fdtfile;" \ ++ "bootm $loadaddr - $fdtaddr" ++ ++#define CONFIG_RAMBOOTCOMMAND \ ++ "setenv bootargs root=/dev/ram rw " \ ++ "console=$consoledev,$baudrate $othbootargs;" \ ++ "tftp $ramdiskaddr $ramdiskfile;" \ ++ "tftp $loadaddr $bootfile;" \ ++ "tftp $fdtaddr $fdtfile;" \ ++ "bootm $loadaddr $ramdiskaddr $fdtaddr" ++ ++ ++#undef MK_STR ++#undef XMK_STR ++ ++#endif +diff -Naupr u-boot-1.1.6/include/configs/MPC8360EMDS.h u-boot-1.1.6-fsl-1/include/configs/MPC8360EMDS.h +--- u-boot-1.1.6/include/configs/MPC8360EMDS.h 1969-12-31 18:00:00.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/include/configs/MPC8360EMDS.h 2006-12-06 10:33:49.000000000 -0600 +@@ -0,0 +1,635 @@ ++/* ++ * Copyright (C) 2006 Freescale Semiconductor, Inc. ++ * ++ * Dave Liu <daveliu@freescale.com> ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#ifndef __CONFIG_H ++#define __CONFIG_H ++ ++#undef DEBUG ++ ++/* ++ * High Level Configuration Options ++ */ ++#define CONFIG_E300 1 /* E300 family */ ++#define CONFIG_QE 1 /* Has QE */ ++#define CONFIG_MPC83XX 1 /* MPC83XX family */ ++#define CONFIG_MPC8360 1 /* MPC8360 CPU specific */ ++#define CONFIG_MPC8360EMDS 1 /* MPC8360EMDS board specific */ ++ ++/* ++ * System Clock Setup ++ */ ++#ifdef CONFIG_PCISLAVE ++#define CONFIG_83XX_PCICLK 66000000 /* in HZ */ ++#else ++#define CONFIG_83XX_CLKIN 66000000 /* in Hz */ ++#endif ++ ++#ifndef CONFIG_SYS_CLK_FREQ ++#define CONFIG_SYS_CLK_FREQ 66000000 ++#endif ++ ++/* ++ * Hardware Reset Configuration Word ++ */ ++#define CFG_HRCW_LOW (\ ++ HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\ ++ HRCWL_DDR_TO_SCB_CLK_1X1 |\ ++ HRCWL_CSB_TO_CLKIN_4X1 |\ ++ HRCWL_VCO_1X2 |\ ++ HRCWL_CE_PLL_VCO_DIV_4 |\ ++ HRCWL_CE_PLL_DIV_1X1 |\ ++ HRCWL_CE_TO_PLL_1X6 |\ ++ HRCWL_CORE_TO_CSB_2X1) ++ ++#ifdef CONFIG_PCISLAVE ++#define CFG_HRCW_HIGH (\ ++ HRCWH_PCI_AGENT |\ ++ HRCWH_PCI1_ARBITER_DISABLE |\ ++ HRCWH_PCICKDRV_DISABLE |\ ++ HRCWH_CORE_ENABLE |\ ++ HRCWH_FROM_0XFFF00100 |\ ++ HRCWH_BOOTSEQ_DISABLE |\ ++ HRCWH_SW_WATCHDOG_DISABLE |\ ++ HRCWH_ROM_LOC_LOCAL_16BIT) ++#else ++#define CFG_HRCW_HIGH (\ ++ HRCWH_PCI_HOST |\ ++ HRCWH_PCI1_ARBITER_ENABLE |\ ++ HRCWH_PCICKDRV_ENABLE |\ ++ HRCWH_CORE_ENABLE |\ ++ HRCWH_FROM_0X00000100 |\ ++ HRCWH_BOOTSEQ_DISABLE |\ ++ HRCWH_SW_WATCHDOG_DISABLE |\ ++ HRCWH_ROM_LOC_LOCAL_16BIT) ++#endif ++ ++/* ++ * System IO Config ++ */ ++#define CFG_SICRH 0x00000000 ++#define CFG_SICRL 0x40000000 ++ ++#define CONFIG_BOARD_EARLY_INIT_F /* call board_pre_init */ ++ ++/* ++ * IMMR new address ++ */ ++#define CFG_IMMR 0xE0000000 ++ ++/* ++ * DDR Setup ++ */ ++#define CFG_DDR_BASE 0x00000000 /* DDR is system memory */ ++#define CFG_SDRAM_BASE CFG_DDR_BASE ++#define CFG_DDR_SDRAM_BASE CFG_DDR_BASE ++ ++#define CFG_83XX_DDR_USES_CS0 ++ ++#undef CONFIG_DDR_ECC /* only for ECC DDR module */ ++#define CONFIG_DDR_ECC_CMD /* Use DDR ECC user commands */ ++ ++#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */ ++#if defined(CONFIG_SPD_EEPROM) ++/* ++ * Determine DDR configuration from I2C interface. ++ */ ++#define SPD_EEPROM_ADDRESS 0x52 /* DDR SODIMM */ ++#else ++/* ++ * Manually set up DDR parameters ++ */ ++#define CFG_DDR_SIZE 256 /* MB */ ++#define CFG_DDR_CONFIG (CSCONFIG_EN | CSCONFIG_ROW_BIT_13 | CSCONFIG_COL_BIT_9) ++#define CFG_DDR_TIMING_1 0x37344321 /* tCL-tRCD-tRP-tRAS=2.5-3-3-7 */ ++#define CFG_DDR_TIMING_2 0x00000800 /* may need tuning */ ++#define CFG_DDR_CONTROL 0x42008000 /* Self refresh,2T timing */ ++#define CFG_DDR_MODE 0x20000162 /* DLL,normal,seq,4/2.5 */ ++#define CFG_DDR_INTERVAL 0x045b0100 /* page mode */ ++#endif ++ ++/* ++ * Memory test ++ */ ++#undef CFG_DRAM_TEST /* memory test, takes time */ ++#define CFG_MEMTEST_START 0x00000000 /* memtest region */ ++#define CFG_MEMTEST_END 0x00100000 ++ ++/* ++ * The reserved memory ++ */ ++ ++#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */ ++ ++#if (CFG_MONITOR_BASE < CFG_FLASH_BASE) ++#define CFG_RAMBOOT ++#else ++#undef CFG_RAMBOOT ++#endif ++ ++#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ ++#define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */ ++ ++/* ++ * Initial RAM Base Address Setup ++ */ ++#define CFG_INIT_RAM_LOCK 1 ++#define CFG_INIT_RAM_ADDR 0xE6000000 /* Initial RAM address */ ++#define CFG_INIT_RAM_END 0x1000 /* End of used area in RAM */ ++#define CFG_GBL_DATA_SIZE 0x100 /* num bytes initial data */ ++#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) ++ ++/* ++ * Local Bus Configuration & Clock Setup ++ */ ++#define CFG_LCRR (LCRR_DBYP | LCRR_CLKDIV_4) ++#define CFG_LBC_LBCR 0x00000000 ++ ++/* ++ * FLASH on the Local Bus ++ */ ++#define CFG_FLASH_CFI /* use the Common Flash Interface */ ++#define CFG_FLASH_CFI_DRIVER /* use the CFI driver */ ++#define CFG_FLASH_BASE 0xFE000000 /* FLASH base address */ ++#define CFG_FLASH_SIZE 16 /* FLASH size is 16M */ ++ ++#define CFG_LBLAWBAR0_PRELIM CFG_FLASH_BASE /* Window base at flash base */ ++#define CFG_LBLAWAR0_PRELIM 0x80000018 /* 32MB window size */ ++ ++#define CFG_BR0_PRELIM (CFG_FLASH_BASE | /* Flash Base address */ \ ++ (2 << BR_PS_SHIFT) | /* 16 bit port size */ \ ++ BR_V) /* valid */ ++#define CFG_OR0_PRELIM 0xfe006ff7 /* 16MB Flash size */ ++ ++#define CFG_MAX_FLASH_BANKS 1 /* number of banks */ ++#define CFG_MAX_FLASH_SECT 128 /* sectors per device */ ++ ++#undef CFG_FLASH_CHECKSUM ++ ++/* ++ * BCSR on the Local Bus ++ */ ++#define CFG_BCSR 0xF8000000 ++#define CFG_LBLAWBAR1_PRELIM CFG_BCSR /* Access window base at BCSR base */ ++#define CFG_LBLAWAR1_PRELIM 0x8000000E /* Access window size 32K */ ++ ++#define CFG_BR1_PRELIM (CFG_BCSR|0x00000801) /* Port size=8bit, MSEL=GPCM */ ++#define CFG_OR1_PRELIM 0xFFFFE9f7 /* length 32K */ ++ ++/* ++ * SDRAM on the Local Bus ++ */ ++#define CFG_LBC_SDRAM_BASE 0xF0000000 /* SDRAM base address */ ++#define CFG_LBC_SDRAM_SIZE 64 /* LBC SDRAM is 64MB */ ++ ++#define CFG_LB_SDRAM /* if board has SRDAM on local bus */ ++ ++#ifdef CFG_LB_SDRAM ++#define CFG_LBLAWBAR2_PRELIM CFG_LBC_SDRAM_BASE ++#define CFG_LBLAWAR2_PRELIM 0x80000019 /* 64MB */ ++ ++/*local bus BR2, OR2 definition for SDRAM if soldered on the EPB board */ ++/* ++ * Base Register 2 and Option Register 2 configure SDRAM. ++ * The SDRAM base address, CFG_LBC_SDRAM_BASE, is 0xf0000000. ++ * ++ * For BR2, need: ++ * Base address of 0xf0000000 = BR[0:16] = 1111 0000 0000 0000 0 ++ * port size = 32-bits = BR2[19:20] = 11 ++ * no parity checking = BR2[21:22] = 00 ++ * SDRAM for MSEL = BR2[24:26] = 011 ++ * Valid = BR[31] = 1 ++ * ++ * 0 4 8 12 16 20 24 28 ++ * 1111 0000 0000 0000 0001 1000 0110 0001 = f0001861 ++ * ++ * CFG_LBC_SDRAM_BASE should be masked and OR'ed into ++ * the top 17 bits of BR2. ++ */ ++ ++#define CFG_BR2_PRELIM 0xf0001861 /*Port size=32bit, MSEL=SDRAM */ ++ ++/* ++ * The SDRAM size in MB, CFG_LBC_SDRAM_SIZE, is 64. ++ * ++ * For OR2, need: ++ * 64MB mask for AM, OR2[0:7] = 1111 1100 ++ * XAM, OR2[17:18] = 11 ++ * 9 columns OR2[19-21] = 010 ++ * 13 rows OR2[23-25] = 100 ++ * EAD set for extra time OR[31] = 1 ++ * ++ * 0 4 8 12 16 20 24 28 ++ * 1111 1100 0000 0000 0110 1001 0000 0001 = fc006901 ++ */ ++ ++#define CFG_OR2_PRELIM 0xfc006901 ++ ++#define CFG_LBC_LSRT 0x32000000 /* LB sdram refresh timer, about 6us */ ++#define CFG_LBC_MRTPR 0x20000000 /* LB refresh timer prescal, 266MHz/32 */ ++ ++/* ++ * LSDMR masks ++ */ ++#define CFG_LBC_LSDMR_OP_NORMAL (0 << (31 - 4)) ++#define CFG_LBC_LSDMR_OP_ARFRSH (1 << (31 - 4)) ++#define CFG_LBC_LSDMR_OP_SRFRSH (2 << (31 - 4)) ++#define CFG_LBC_LSDMR_OP_MRW (3 << (31 - 4)) ++#define CFG_LBC_LSDMR_OP_PRECH (4 << (31 - 4)) ++#define CFG_LBC_LSDMR_OP_PCHALL (5 << (31 - 4)) ++#define CFG_LBC_LSDMR_OP_ACTBNK (6 << (31 - 4)) ++#define CFG_LBC_LSDMR_OP_RWINV (7 << (31 - 4)) ++ ++#define CFG_LBC_LSDMR_COMMON 0x0063b723 ++ ++/* ++ * SDRAM Controller configuration sequence. ++ */ ++#define CFG_LBC_LSDMR_1 ( CFG_LBC_LSDMR_COMMON \ ++ | CFG_LBC_LSDMR_OP_PCHALL) ++#define CFG_LBC_LSDMR_2 ( CFG_LBC_LSDMR_COMMON \ ++ | CFG_LBC_LSDMR_OP_ARFRSH) ++#define CFG_LBC_LSDMR_3 ( CFG_LBC_LSDMR_COMMON \ ++ | CFG_LBC_LSDMR_OP_ARFRSH) ++#define CFG_LBC_LSDMR_4 ( CFG_LBC_LSDMR_COMMON \ ++ | CFG_LBC_LSDMR_OP_MRW) ++#define CFG_LBC_LSDMR_5 ( CFG_LBC_LSDMR_COMMON \ ++ | CFG_LBC_LSDMR_OP_NORMAL) ++ ++#endif ++ ++/* ++ * Windows to access PIB via local bus ++ */ ++#define CFG_LBLAWBAR3_PRELIM 0xf8008000 /* windows base 0xf8008000 */ ++#define CFG_LBLAWAR3_PRELIM 0x8000000f /* windows size 64KB */ ++ ++/* ++ * CS4 on Local Bus, to PIB ++ */ ++#define CFG_BR4_PRELIM 0xf8008801 /* CS4 base address at 0xf8008000 */ ++#define CFG_OR4_PRELIM 0xffffe9f7 /* size 32KB, port size 8bit, GPCM */ ++ ++/* ++ * CS5 on Local Bus, to PIB ++ */ ++#define CFG_BR5_PRELIM 0xf8010801 /* CS5 base address at 0xf8010000 */ ++#define CFG_OR5_PRELIM 0xffffe9f7 /* size 32KB, port size 8bit, GPCM */ ++ ++/* ++ * Serial Port ++ */ ++#define CONFIG_CONS_INDEX 1 ++#undef CONFIG_SERIAL_SOFTWARE_FIFO ++#define CFG_NS16550 ++#define CFG_NS16550_SERIAL ++#define CFG_NS16550_REG_SIZE 1 ++#define CFG_NS16550_CLK get_bus_freq(0) ++ ++#define CFG_BAUDRATE_TABLE \ ++ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200} ++ ++#define CFG_NS16550_COM1 (CFG_IMMR+0x4500) ++#define CFG_NS16550_COM2 (CFG_IMMR+0x4600) ++ ++/* Use the HUSH parser */ ++#define CFG_HUSH_PARSER ++#ifdef CFG_HUSH_PARSER ++#define CFG_PROMPT_HUSH_PS2 "> " ++#endif ++ ++/* pass open firmware flat tree */ ++#define CONFIG_OF_FLAT_TREE 1 ++#define CONFIG_OF_BOARD_SETUP 1 ++ ++/* maximum size of the flat tree (8K) */ ++#define OF_FLAT_TREE_MAX_SIZE 8192 ++ ++#define OF_CPU "PowerPC,8360@0" ++#define OF_SOC "soc8360@e0000000" ++#define OF_TBCLK (bd->bi_busfreq / 4) ++#define OF_STDOUT_PATH "/soc8360@e0000000/serial@4500" ++ ++/* I2C */ ++#define CONFIG_HARD_I2C /* I2C with hardware support */ ++#undef CONFIG_SOFT_I2C /* I2C bit-banged */ ++#define CONFIG_FSL_I2C ++#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ ++#define CFG_I2C_SLAVE 0x7F ++#define CFG_I2C_NOPROBES {0x52} /* Don't probe these addrs */ ++#define CFG_I2C_OFFSET 0x3000 ++#define CFG_I2C2_OFFSET 0x3100 ++ ++/* ++ * Config on-board RTC ++ */ ++#define CONFIG_RTC_DS1374 /* use ds1374 rtc via i2c */ ++#define CFG_I2C_RTC_ADDR 0x68 /* at address 0x68 */ ++ ++/* ++ * General PCI ++ * Addresses are mapped 1-1. ++ */ ++#define CFG_PCI_MEM_BASE 0x80000000 ++#define CFG_PCI_MEM_PHYS CFG_PCI_MEM_BASE ++#define CFG_PCI_MEM_SIZE 0x10000000 /* 256M */ ++#define CFG_PCI_MMIO_BASE 0x90000000 ++#define CFG_PCI_MMIO_PHYS CFG_PCI_MMIO_BASE ++#define CFG_PCI_MMIO_SIZE 0x10000000 /* 256M */ ++#define CFG_PCI_IO_BASE 0xE0300000 ++#define CFG_PCI_IO_PHYS 0xE0300000 ++#define CFG_PCI_IO_SIZE 0x100000 /* 1M */ ++ ++#define CFG_PCI_SLV_MEM_LOCAL CFG_SDRAM_BASE ++#define CFG_PCI_SLV_MEM_BUS 0x00000000 ++#define CFG_PCI_SLV_MEM_SIZE 0x80000000 ++ ++ ++#ifdef CONFIG_PCI ++ ++#define CONFIG_NET_MULTI ++#define CONFIG_PCI_PNP /* do pci plug-and-play */ ++ ++#undef CONFIG_EEPRO100 ++#undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ ++#define CFG_PCI_SUBSYS_VENDORID 0x1957 /* Freescale */ ++ ++#endif /* CONFIG_PCI */ ++ ++ ++#ifndef CONFIG_NET_MULTI ++#define CONFIG_NET_MULTI 1 ++#endif ++ ++/* ++ * QE UEC ethernet configuration ++ */ ++#define CONFIG_UEC_ETH ++#define CONFIG_ETHPRIME "Freescale GETH" ++#define CONFIG_PHY_MODE_NEED_CHANGE ++ ++#define CONFIG_UEC_ETH1 /* GETH1 */ ++ ++#ifdef CONFIG_UEC_ETH1 ++#define CFG_UEC1_UCC_NUM 0 /* UCC1 */ ++#define CFG_UEC1_RX_CLK QE_CLK_NONE ++#define CFG_UEC1_TX_CLK QE_CLK9 ++#define CFG_UEC1_ETH_TYPE GIGA_ETH ++#define CFG_UEC1_PHY_ADDR 0 ++#define CFG_UEC1_INTERFACE_MODE ENET_1000_GMII ++#endif ++ ++#define CONFIG_UEC_ETH2 /* GETH2 */ ++ ++#ifdef CONFIG_UEC_ETH2 ++#define CFG_UEC2_UCC_NUM 1 /* UCC2 */ ++#define CFG_UEC2_RX_CLK QE_CLK_NONE ++#define CFG_UEC2_TX_CLK QE_CLK4 ++#define CFG_UEC2_ETH_TYPE GIGA_ETH ++#define CFG_UEC2_PHY_ADDR 1 ++#define CFG_UEC2_INTERFACE_MODE ENET_1000_GMII ++#endif ++ ++/* ++ * Environment ++ */ ++ ++#ifndef CFG_RAMBOOT ++ #define CFG_ENV_IS_IN_FLASH 1 ++ #define CFG_ENV_ADDR (CFG_MONITOR_BASE + 0x40000) ++ #define CFG_ENV_SECT_SIZE 0x40000 /* 256K(one sector) for env */ ++ #define CFG_ENV_SIZE 0x2000 ++#else ++ #define CFG_NO_FLASH 1 /* Flash is not usable now */ ++ #define CFG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */ ++ #define CFG_ENV_ADDR (CFG_MONITOR_BASE - 0x1000) ++ #define CFG_ENV_SIZE 0x2000 ++#endif ++ ++#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ ++#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ ++ ++#if defined(CFG_RAMBOOT) ++#if defined(CONFIG_PCI) ++#define CONFIG_COMMANDS ((CONFIG_CMD_DFL \ ++ | CFG_CMD_PING \ ++ | CFG_CMD_ASKENV \ ++ | CFG_CMD_PCI \ ++ | CFG_CMD_I2C) \ ++ & \ ++ ~(CFG_CMD_ENV \ ++ | CFG_CMD_LOADS)) ++#else ++#define CONFIG_COMMANDS ((CONFIG_CMD_DFL \ ++ | CFG_CMD_PING \ ++ | CFG_CMD_ASKENV \ ++ | CFG_CMD_I2C) \ ++ & \ ++ ~(CFG_CMD_ENV \ ++ | CFG_CMD_LOADS)) ++#endif ++#else ++#if defined(CONFIG_PCI) ++#define CONFIG_COMMANDS (CONFIG_CMD_DFL \ ++ | CFG_CMD_PCI \ ++ | CFG_CMD_PING \ ++ | CFG_CMD_ASKENV \ ++ | CFG_CMD_I2C) ++#else ++#define CONFIG_COMMANDS (CONFIG_CMD_DFL \ ++ | CFG_CMD_PING \ ++ | CFG_CMD_ASKENV \ ++ | CFG_CMD_I2C ) ++#endif ++#endif ++ ++#include <cmd_confdefs.h> ++ ++#undef CONFIG_WATCHDOG /* watchdog disabled */ ++ ++/* ++ * Miscellaneous configurable options ++ */ ++#define CFG_LONGHELP /* undef to save memory */ ++#define CFG_LOAD_ADDR 0x2000000 /* default load address */ ++#define CFG_PROMPT "=> " /* Monitor Command Prompt */ ++ ++#if (CONFIG_COMMANDS & CFG_CMD_KGDB) ++ #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ ++#else ++ #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ ++#endif ++ ++#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ ++#define CFG_MAXARGS 16 /* max number of command args */ ++#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ ++#define CFG_HZ 1000 /* decrementer freq: 1ms ticks */ ++ ++/* ++ * For booting Linux, the board info and command line data ++ * have to be in the first 8 MB of memory, since this is ++ * the maximum mapped by the Linux kernel during initialization. ++ */ ++#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ ++ ++/* ++ * Core HID Setup ++ */ ++#define CFG_HID0_INIT 0x000000000 ++#define CFG_HID0_FINAL HID0_ENABLE_MACHINE_CHECK ++#define CFG_HID2 HID2_HBE ++ ++/* ++ * Cache Config ++ */ ++#define CFG_DCACHE_SIZE 32768 ++#define CFG_CACHELINE_SIZE 32 ++#if (CONFIG_COMMANDS & CFG_CMD_KGDB) ++#define CFG_CACHELINE_SHIFT 5 /*log base 2 of the above value */ ++#endif ++ ++/* ++ * MMU Setup ++ */ ++ ++/* DDR: cache cacheable */ ++#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) ++#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) ++#define CFG_DBAT0L CFG_IBAT0L ++#define CFG_DBAT0U CFG_IBAT0U ++ ++/* IMMRBAR & PCI IO: cache-inhibit and guarded */ ++#define CFG_IBAT1L (CFG_IMMR | BATL_PP_10 | \ ++ BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) ++#define CFG_IBAT1U (CFG_IMMR | BATU_BL_4M | BATU_VS | BATU_VP) ++#define CFG_DBAT1L CFG_IBAT1L ++#define CFG_DBAT1U CFG_IBAT1U ++ ++/* BCSR: cache-inhibit and guarded */ ++#define CFG_IBAT2L (CFG_BCSR | BATL_PP_10 | \ ++ BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) ++#define CFG_IBAT2U (CFG_BCSR | BATU_BL_128K | BATU_VS | BATU_VP) ++#define CFG_DBAT2L CFG_IBAT2L ++#define CFG_DBAT2U CFG_IBAT2U ++ ++/* FLASH: icache cacheable, but dcache-inhibit and guarded */ ++#define CFG_IBAT3L (CFG_FLASH_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) ++#define CFG_IBAT3U (CFG_FLASH_BASE | BATU_BL_32M | BATU_VS | BATU_VP) ++#define CFG_DBAT3L (CFG_FLASH_BASE | BATL_PP_10 | \ ++ BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) ++#define CFG_DBAT3U CFG_IBAT3U ++ ++/* Local bus SDRAM: cacheable */ ++#define CFG_IBAT4L (CFG_LBC_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) ++#define CFG_IBAT4U (CFG_LBC_SDRAM_BASE | BATU_BL_64M | BATU_VS | BATU_VP) ++#define CFG_DBAT4L CFG_IBAT4L ++#define CFG_DBAT4U CFG_IBAT4U ++ ++/* Stack in dcache: cacheable, no memory coherence */ ++#define CFG_IBAT5L (CFG_INIT_RAM_ADDR | BATL_PP_10) ++#define CFG_IBAT5U (CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP) ++#define CFG_DBAT5L CFG_IBAT5L ++#define CFG_DBAT5U CFG_IBAT5U ++ ++#ifdef CONFIG_PCI ++/* PCI MEM space: cacheable */ ++#define CFG_IBAT6L (CFG_PCI_MEM_PHYS | BATL_PP_10 | BATL_MEMCOHERENCE) ++#define CFG_IBAT6U (CFG_PCI_MEM_PHYS | BATU_BL_256M | BATU_VS | BATU_VP) ++#define CFG_DBAT6L CFG_IBAT6L ++#define CFG_DBAT6U CFG_IBAT6U ++/* PCI MMIO space: cache-inhibit and guarded */ ++#define CFG_IBAT7L (CFG_PCI_MMIO_PHYS | BATL_PP_10 | \ ++ BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) ++#define CFG_IBAT7U (CFG_PCI_MMIO_PHYS | BATU_BL_256M | BATU_VS | BATU_VP) ++#define CFG_DBAT7L CFG_IBAT7L ++#define CFG_DBAT7U CFG_IBAT7U ++#else ++#define CFG_IBAT6L (0) ++#define CFG_IBAT6U (0) ++#define CFG_IBAT7L (0) ++#define CFG_IBAT7U (0) ++#define CFG_DBAT6L CFG_IBAT6L ++#define CFG_DBAT6U CFG_IBAT6U ++#define CFG_DBAT7L CFG_IBAT7L ++#define CFG_DBAT7U CFG_IBAT7U ++#endif ++ ++/* ++ * Internal Definitions ++ * ++ * Boot Flags ++ */ ++#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ ++#define BOOTFLAG_WARM 0x02 /* Software reboot */ ++ ++#if (CONFIG_COMMANDS & CFG_CMD_KGDB) ++#define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */ ++#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ ++#endif ++ ++/* ++ * Environment Configuration ++ */ ++ ++#define CONFIG_ENV_OVERWRITE ++ ++#if defined(CONFIG_UEC_ETH) ++#define CONFIG_ETHADDR 00:04:9f:ef:01:01 ++#define CONFIG_HAS_ETH1 ++#define CONFIG_ETH1ADDR 00:04:9f:ef:01:02 ++#endif ++ ++#define CONFIG_BAUDRATE 115200 ++ ++#define CONFIG_LOADADDR 200000 /* default location for tftp and bootm */ ++ ++#define CONFIG_BOOTDELAY 6 /* -1 disables auto-boot */ ++#undef CONFIG_BOOTARGS /* the boot command will set bootargs */ ++ ++#define CONFIG_EXTRA_ENV_SETTINGS \ ++ "netdev=eth0\0" \ ++ "consoledev=ttyS0\0" \ ++ "ramdiskaddr=1000000\0" \ ++ "ramdiskfile=ramfs.83xx\0" \ ++ "fdtaddr=400000\0" \ ++ "fdtfile=mpc8349emds.dtb\0" \ ++ "" ++ ++#define CONFIG_NFSBOOTCOMMAND \ ++ "setenv bootargs root=/dev/nfs rw " \ ++ "nfsroot=$serverip:$rootpath " \ ++ "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ ++ "console=$consoledev,$baudrate $othbootargs;" \ ++ "tftp $loadaddr $bootfile;" \ ++ "tftp $fdtaddr $fdtfile;" \ ++ "bootm $loadaddr - $fdtaddr" ++ ++#define CONFIG_RAMBOOTCOMMAND \ ++ "setenv bootargs root=/dev/ram rw " \ ++ "console=$consoledev,$baudrate $othbootargs;" \ ++ "tftp $ramdiskaddr $ramdiskfile;" \ ++ "tftp $loadaddr $bootfile;" \ ++ "tftp $fdtaddr $fdtfile;" \ ++ "bootm $loadaddr $ramdiskaddr $fdtaddr" ++ ++ ++#define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND ++ ++#endif /* __CONFIG_H */ +diff -Naupr u-boot-1.1.6/include/configs/p3mx.h u-boot-1.1.6-fsl-1/include/configs/p3mx.h +--- u-boot-1.1.6/include/configs/p3mx.h 1969-12-31 18:00:00.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/include/configs/p3mx.h 2006-12-06 10:33:49.000000000 -0600 +@@ -0,0 +1,450 @@ ++/* ++ * (C) Copyright 2006 ++ * Stefan Roese, DENX Software Engineering, sr@denx.de. ++ * ++ * Based on original work by ++ * Roel Loeffen, (C) Copyright 2006 Prodrive B.V. ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++/************************************************************************ ++ * p3mx.h - configuration for Prodrive P3M750 & P3M7448 boards ++ * ++ * The defines: ++ * CONFIG_P3M750 or ++ * CONFIG_P3M7448 ++ * are written into include/config.h by the "make xxx_config" command ++ ***********************************************************************/ ++#ifndef __CONFIG_H ++#define __CONFIG_H ++ ++/*----------------------------------------------------------------------- ++ * High Level Configuration Options ++ *----------------------------------------------------------------------*/ ++#define CONFIG_P3Mx /* used for both board versions */ ++ ++#if defined (CONFIG_P3M750) ++#define CONFIG_750FX /* 750GL/GX/FX */ ++#define CFG_BOARD_NAME "P3M750" ++#define CFG_BUS_HZ 100000000 ++#define CFG_BUS_CLK CFG_BUS_HZ ++#define CFG_TCLK 100000000 ++#elif defined (CONFIG_P3M7448) ++#define CONFIG_74xx ++#define CFG_BOARD_NAME "P3M7448" ++#define CFG_BUS_HZ 133333333 ++#define CFG_BUS_CLK CFG_BUS_HZ ++#define CFG_TCLK 133333333 ++#endif ++#define CFG_GT_DUAL_CPU /* also for JTAG even with one cpu */ ++ ++/* which initialization functions to call for this board */ ++#define CFG_BOARD_ASM_INIT 1 ++#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ ++#define CONFIG_BOARD_EARLY_INIT_R 1 /* Call board_early_init_f */ ++#define CONFIG_MISC_INIT_R 1 /* Call misc_init_r() */ ++#define CONFIG_ADD_RAM_INFO 1 /* Print additional info */ ++ ++/*----------------------------------------------------------------------- ++ * Base addresses -- Note these are effective addresses where the ++ * actual resources get mapped (not physical addresses) ++ *----------------------------------------------------------------------*/ ++#define CFG_SDRAM_BASE 0x00000000 ++#ifdef CONFIG_P3M750 ++#define CFG_SDRAM1_BASE 0x10000000 /* each 256 MByte */ ++#endif ++ ++#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ ++#if defined (CONFIG_P3M750) ++#define CFG_FLASH_BASE 0xff800000 /* start of flash banks */ ++#define CFG_BOOT_SIZE _8M /* boot flash */ ++#elif defined (CONFIG_P3M7448) ++#define CFG_FLASH_BASE 0xff000000 /* start of flash banks */ ++#define CFG_BOOT_SIZE _16M /* boot flash */ ++#endif ++#define CFG_BOOT_SPACE CFG_FLASH_BASE /* BOOT_CS0 flash 0 */ ++#define CFG_MONITOR_BASE 0xfff00000 ++#define CFG_RESET_ADDRESS 0xfff00100 ++#define CFG_MALLOC_LEN (256 << 10) /* Reserve 256 kB for malloc */ ++#define CFG_MISC_REGION_BASE 0xf0000000 ++ ++#define CFG_DFL_GT_REGS 0xf1000000 /* boot time GT_REGS */ ++#define CFG_GT_REGS 0xf1000000 /* GT Registers are mapped here */ ++#define CFG_INT_SRAM_BASE 0x42000000 /* GT offers 256k internal SRAM */ ++ ++/*----------------------------------------------------------------------- ++ * Initial RAM & stack pointer (placed in internal SRAM) ++ *----------------------------------------------------------------------*/ ++ /* ++ * When locking data in cache you should point the CFG_INIT_RAM_ADDRESS ++ * To an unused memory region. The stack will remain in cache until RAM ++ * is initialized ++*/ ++#undef CFG_INIT_RAM_LOCK ++#define CFG_INIT_RAM_ADDR 0x42000000 ++#define CFG_INIT_RAM_END 0x1000 ++#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for init data */ ++#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) ++ ++ ++/*----------------------------------------------------------------------- ++ * Serial Port ++ *----------------------------------------------------------------------*/ ++#define CONFIG_MPSC /* MV64460 Serial */ ++#define CONFIG_MPSC_PORT 0 ++#define CONFIG_BAUDRATE 115200 /* console baudrate */ ++#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } ++#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ ++#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ ++ ++/*----------------------------------------------------------------------- ++ * Ethernet ++ *----------------------------------------------------------------------*/ ++/* Change the default ethernet port, use this define (options: 0, 1, 2) */ ++#define CFG_ETH_PORT ETH_0 ++#define CONFIG_NET_MULTI ++#define MV_ETH_DEVS 2 ++#define CONFIG_PHY_RESET 1 /* reset phy upon startup */ ++#define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */ ++ ++/*----------------------------------------------------------------------- ++ * FLASH related ++ *----------------------------------------------------------------------*/ ++#define CFG_FLASH_CFI /* The flash is CFI compatible */ ++#define CFG_FLASH_CFI_DRIVER /* Use common CFI driver */ ++#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ ++#define CFG_MAX_FLASH_SECT 512 /* max number of sectors on one chip */ ++#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ ++#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ ++#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */ ++#define CFG_FLASH_PROTECTION 1 /* use hardware flash protection */ ++#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ ++ ++#define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */ ++#if defined (CONFIG_P3M750) ++#define CFG_ENV_SECT_SIZE 0x20000 /* one sector (1 device)*/ ++#elif defined (CONFIG_P3M7448) ++#define CFG_ENV_SECT_SIZE 0x40000 /* two sectors (2 devices parallel */ ++#endif ++#define CFG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */ ++#define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN) ++ ++/*----------------------------------------------------------------------- ++ * DDR SDRAM ++ *----------------------------------------------------------------------*/ ++#define CONFIG_MV64460_ECC ++ ++/*----------------------------------------------------------------------- ++ * I2C ++ *----------------------------------------------------------------------*/ ++#define CFG_I2C_SPEED 100000 /* I2C speed default */ ++ ++/* I2C RTC */ ++#define CONFIG_RTC_M41T11 1 ++#define CFG_I2C_RTC_ADDR 0x68 ++#define CFG_M41T11_BASE_YEAR 1900 /* play along with linux */ ++ ++/*----------------------------------------------------------------------- ++ * PCI stuff ++ *----------------------------------------------------------------------*/ ++#define PCI_HOST_ADAPTER 0 /* configure ar pci adapter */ ++#define PCI_HOST_FORCE 1 /* configure as pci host */ ++#define PCI_HOST_AUTO 2 /* detected via arbiter enable */ ++ ++#define CONFIG_PCI /* include pci support */ ++#define CONFIG_PCI_HOST PCI_HOST_FORCE /* select pci host function */ ++#define CONFIG_PCI_PNP /* do pci plug-and-play */ ++#define CONFIG_PCI_SCAN_SHOW /* show devices on bus */ ++ ++/* PCI MEMORY MAP section */ ++#define CFG_PCI0_MEM_BASE 0x80000000 ++#define CFG_PCI0_MEM_SIZE _128M ++#define CFG_PCI1_MEM_BASE 0x88000000 ++#define CFG_PCI1_MEM_SIZE _128M ++ ++#define CFG_PCI0_0_MEM_SPACE (CFG_PCI0_MEM_BASE) ++#define CFG_PCI1_0_MEM_SPACE (CFG_PCI1_MEM_BASE) ++ ++/* PCI I/O MAP section */ ++#define CFG_PCI0_IO_BASE 0xfa000000 ++#define CFG_PCI0_IO_SIZE _16M ++#define CFG_PCI1_IO_BASE 0xfb000000 ++#define CFG_PCI1_IO_SIZE _16M ++ ++#define CFG_PCI0_IO_SPACE (CFG_PCI0_IO_BASE) ++#define CFG_PCI0_IO_SPACE_PCI 0x00000000 ++#define CFG_PCI1_IO_SPACE (CFG_PCI1_IO_BASE) ++#define CFG_PCI1_IO_SPACE_PCI 0x00000000 ++ ++#define CFG_ISA_IO_BASE_ADDRESS (CFG_PCI0_IO_BASE) ++ ++#define CFG_PCI_IDSEL 0x30 ++ ++#undef CONFIG_BOOTARGS ++#define CONFIG_EXTRA_ENV_SETTINGS_COMMON \ ++ "netdev=eth0\0" \ ++ "nfsargs=setenv bootargs root=/dev/nfs rw " \ ++ "nfsroot=${serverip}:${rootpath}\0" \ ++ "ramargs=setenv bootargs root=/dev/ram rw\0" \ ++ "addip=setenv bootargs ${bootargs} " \ ++ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ ++ ":${hostname}:${netdev}:off panic=1\0" \ ++ "addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\ ++ "flash_nfs=run nfsargs addip addtty;" \ ++ "bootm ${kernel_addr}\0" \ ++ "flash_self=run ramargs addip addtty;" \ ++ "bootm ${kernel_addr} ${ramdisk_addr}\0" \ ++ "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \ ++ "bootm\0" \ ++ "rootpath=/opt/eldk/ppc_6xx\0" \ ++ "u-boot=p3mx/u-boot/u-boot.bin\0" \ ++ "load=tftp 100000 ${u-boot}\0" \ ++ "update=protect off fff00000 fff3ffff;era fff00000 fff3ffff;" \ ++ "cp.b 100000 fff00000 40000;" \ ++ "setenv filesize;saveenv\0" \ ++ "upd=run load;run update\0" \ ++ "serverip=11.0.0.152\0" ++ ++#if defined (CONFIG_P3M750) ++#define CONFIG_EXTRA_ENV_SETTINGS \ ++ CONFIG_EXTRA_ENV_SETTINGS_COMMON \ ++ "hostname=p3m750\0" \ ++ "bootfile=/tftpboot/p3mx/vxWorks.st\0" \ ++ "kernel_addr=fc000000\0" \ ++ "ramdisk_addr=fc180000\0" \ ++ "vxfile=p3m750/vxWorks\0" \ ++ "vxuser=ddg\0" \ ++ "vxpass=ddg\0" \ ++ "vxtarget=target\0" \ ++ "vxflags=0x8\0" \ ++ "vxargs=setenv bootargs mgi(0,0)host:${vxfile} h=${serverip} " \ ++ "e=${ipaddr} u=${vxuser} pw=${vxpass} tn=${vxtarget} " \ ++ "f=${vxflags}\0" ++#elif defined (CONFIG_P3M7448) ++#define CONFIG_EXTRA_ENV_SETTINGS \ ++ CONFIG_EXTRA_ENV_SETTINGS_COMMON \ ++ "hostname=p3m7448\0" ++#endif ++ ++#if defined (CONFIG_P3M750) ++#define CONFIG_BOOTCOMMAND "tftp;run vxargs;bootvx" ++#elif defined (CONFIG_P3M7448) ++#define CONFIG_BOOTCOMMAND " " ++#endif ++ ++#define CONFIG_BOOTDELAY 3 /* autoboot after 5 seconds */ ++#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | \ ++ CONFIG_BOOTP_BOOTFILESIZE) ++#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ ++ CFG_CMD_ASKENV | \ ++ CFG_CMD_DATE | \ ++ CFG_CMD_DIAG | \ ++ CFG_CMD_ELF | \ ++ CFG_CMD_I2C | \ ++ CFG_CMD_IRQ | \ ++ CFG_CMD_MII | \ ++ CFG_CMD_NET | \ ++ CFG_CMD_NFS | \ ++ CFG_CMD_PING | \ ++ CFG_CMD_REGINFO | \ ++ CFG_CMD_PCI | \ ++ CFG_CMD_CACHE | \ ++ CFG_CMD_SDRAM) ++ ++/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ ++#include <cmd_confdefs.h> ++ ++/*----------------------------------------------------------------------- ++ * Miscellaneous configurable options ++ *----------------------------------------------------------------------*/ ++#define CFG_HUSH_PARSER ++#define CFG_PROMPT_HUSH_PS2 "> " ++ ++#define CFG_LONGHELP /* undef to save memory */ ++#define CFG_PROMPT "=> " /* Monitor Command Prompt */ ++#if (CONFIG_COMMANDS & CFG_CMD_KGDB) ++#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ ++#else ++#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ ++#endif ++#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ ++#define CFG_MAXARGS 16 /* max number of command args */ ++#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ ++ ++#define CFG_MEMTEST_START 0x0400000 /* memtest works on */ ++#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ ++ ++#define CFG_LOAD_ADDR 0x08000000 /* default load address */ ++ ++#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ ++ ++#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ ++#define CONFIG_LOOPW 1 /* enable loopw command */ ++#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */ ++#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ ++#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */ ++ ++/*----------------------------------------------------------------------- ++ * Marvell MV64460 config settings ++ *----------------------------------------------------------------------*/ ++/* Reset values for Port behavior (8bit/ 32bit, etc.) only corrected device width */ ++#if defined (CONFIG_P3M750) ++#define CFG_BOOT_PAR 0x8FDFF87F /* 16 bit flash, disable burst*/ ++#elif defined (CONFIG_P3M7448) ++#define CFG_BOOT_PAR 0x8FEFFFFF /* 32 bit flash, burst enabled */ ++#endif ++ ++/* ++ * MPP[0] Serial Port 0 TxD TxD OUT Connected to P14 (buffered) ++ * MPP[1] Serial Port 0 RxD RxD IN Connected to P14 (buffered) ++ * MPP[2] NC ++ * MPP[3] Serial Port 1 TxD TxD OUT Connected to P14 (buffered) ++ * MPP[4] PCI Monarch# GPIO IN Connected to P12 ++ * MPP[5] Serial Port 1 RxD RxD IN Connected to P14 (buffered) ++ * MPP[6] PMC Carrier Interrupt 0 Int IN Connected to P14 ++ * MPP[7] PMC Carrier Interrupt 1 Int IN Connected to P14 ++ * MPP[8] Reserved Do not use ++ * MPP[9] Reserved Do not use ++ * MPP[10] Reserved Do not use ++ * MPP[11] Reserved Do not use ++ * MPP[12] Phy 0 Interrupt Int IN ++ * MPP[13] Phy 1 Interrupt Int IN ++ * MPP[14] NC ++ * MPP[15] NC ++ * MPP[16] PCI Interrupt C Int IN Connected to P11 ++ * MPP[17] PCI Interrupt D Int IN Connected to P11 ++ * MPP[18] Watchdog NMI# GPIO IN Connected to MPP[24] ++ * MPP[19] Watchdog Expired# WDE OUT Connected to rst logic ++ * MPP[20] Watchdog Status WD_STS IN Read back of rst by watchdog ++ * MPP[21] NC ++ * MPP[22] GP LED Green GPIO OUT ++ * MPP[23] GP LED Red GPIO OUT ++ * MPP[24] Watchdog NMI# Int OUT ++ * MPP[25] NC ++ * MPP[26] NC ++ * MPP[27] PCI Interrupt A Int IN Connected to P11 ++ * MPP[28] NC ++ * MPP[29] PCI Interrupt B Int IN Connected to P11 ++ * MPP[30] Module reset GPIO OUT Board reset ++ * MPP[31] PCI EReady GPIO IN Connected to P12 ++ */ ++#define CFG_MPP_CONTROL_0 0x00303022 ++#define CFG_MPP_CONTROL_1 0x00000000 ++#define CFG_MPP_CONTROL_2 0x00004000 ++#define CFG_MPP_CONTROL_3 0x00000004 ++#define CFG_GPP_LEVEL_CONTROL 0x280730D0 ++ ++/*---------------------------------------------------------------------- ++ * Initial BAT mappings ++ */ ++ ++/* NOTES: ++ * 1) GUARDED and WRITE_THRU not allowed in IBATS ++ * 2) CACHEINHIBIT and WRITETHROUGH not allowed together in same BAT ++ */ ++/* SDRAM */ ++#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT) ++#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) ++#define CFG_DBAT0L (CFG_SDRAM_BASE | BATL_PP_RW | BATL_GUARDEDSTORAGE | BATL_CACHEINHIBIT) ++#define CFG_DBAT0U CFG_IBAT0U ++ ++/* init ram */ ++#define CFG_IBAT1L (CFG_INIT_RAM_ADDR | BATL_PP_RW | BATL_MEMCOHERENCE) ++#define CFG_IBAT1U (CFG_INIT_RAM_ADDR | BATU_BL_256K | BATU_VS | BATU_VP) ++#define CFG_DBAT1L CFG_IBAT1L ++#define CFG_DBAT1U CFG_IBAT1U ++ ++/* PCI0, PCI1 in one BAT */ ++#define CFG_IBAT2L BATL_NO_ACCESS ++#define CFG_IBAT2U CFG_DBAT2U ++#define CFG_DBAT2L (CFG_PCI0_MEM_BASE | BATL_CACHEINHIBIT | BATL_PP_RW | BATL_GUARDEDSTORAGE) ++#define CFG_DBAT2U (CFG_PCI0_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) ++ ++/* GT regs, bootrom, all the devices, PCI I/O */ ++#define CFG_IBAT3L (CFG_MISC_REGION_BASE | BATL_CACHEINHIBIT | BATL_PP_RW) ++#define CFG_IBAT3U (CFG_MISC_REGION_BASE | BATU_VS | BATU_VP | BATU_BL_256M) ++#define CFG_DBAT3L (CFG_MISC_REGION_BASE | BATL_CACHEINHIBIT | BATL_PP_RW | BATL_GUARDEDSTORAGE) ++#define CFG_DBAT3U CFG_IBAT3U ++ ++#define CFG_IBAT4L (CFG_SDRAM1_BASE | BATL_PP_RW | BATL_CACHEINHIBIT) ++#define CFG_IBAT4U (CFG_SDRAM1_BASE | BATU_BL_256M | BATU_VS | BATU_VP) ++#define CFG_DBAT4L (CFG_SDRAM1_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) ++#define CFG_DBAT4U CFG_IBAT4U ++ ++/* set rest out of range for Linux !!!!!!!!!!! */ ++ ++/* IBAT5 and DBAT5 */ ++#define CFG_IBAT5L (0x20000000 | BATL_PP_RW | BATL_CACHEINHIBIT) ++#define CFG_IBAT5U (0x20000000 | BATU_BL_256M | BATU_VS | BATU_VP) ++#define CFG_DBAT5L (0x20000000 | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) ++#define CFG_DBAT5U CFG_IBAT5U ++ ++/* IBAT6 and DBAT6 */ ++#define CFG_IBAT6L (0x20000000 | BATL_PP_RW | BATL_CACHEINHIBIT) ++#define CFG_IBAT6U (0x20000000 | BATU_BL_256M | BATU_VS | BATU_VP) ++#define CFG_DBAT6L (0x20000000 | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) ++#define CFG_DBAT6U CFG_IBAT6U ++ ++/* IBAT7 and DBAT7 */ ++#define CFG_IBAT7L (0x20000000 | BATL_PP_RW | BATL_CACHEINHIBIT) ++#define CFG_IBAT7U (0x20000000 | BATU_BL_256M | BATU_VS | BATU_VP) ++#define CFG_DBAT7L (0x20000000 | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) ++#define CFG_DBAT7U CFG_IBAT7U ++ ++/* ++ * For booting Linux, the board info and command line data ++ * have to be in the first 8 MB of memory, since this is ++ * the maximum mapped by the Linux kernel during initialization. ++ */ ++#define CFG_BOOTMAPSZ (8<<20) /* Initial Memory map for Linux */ ++#define CFG_VXWORKS_MAC_PTR 0x42010000 /* use some memory in SRAM that's not used!!! */ ++ ++/*----------------------------------------------------------------------- ++ * Cache Configuration ++ */ ++#define CFG_CACHELINE_SIZE 32 /* For all MPC74xx CPUs */ ++#if (CONFIG_COMMANDS & CFG_CMD_KGDB) ++#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ ++#endif ++ ++/*----------------------------------------------------------------------- ++ * L2CR setup -- make sure this is right for your board! ++ * look in include/mpc74xx.h for the defines used here ++ */ ++#define CFG_L2 ++ ++#if defined (CONFIG_750CX) || defined (CONFIG_750FX) ++#define L2_INIT 0 ++#else ++#define L2_INIT (L2CR_L2SIZ_2M | L2CR_L2CLK_3 | L2CR_L2RAM_BURST | \ ++ L2CR_L2OH_5 | L2CR_L2CTL | L2CR_L2WT) ++#endif ++ ++#define L2_ENABLE (L2_INIT | L2CR_L2E) ++ ++/* ++ * Internal Definitions ++ * ++ * Boot Flags ++ */ ++#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ ++#define BOOTFLAG_WARM 0x02 /* Software reboot */ ++ ++#endif /* __CONFIG_H */ +diff -Naupr u-boot-1.1.6/include/configs/sequoia.h u-boot-1.1.6-fsl-1/include/configs/sequoia.h +--- u-boot-1.1.6/include/configs/sequoia.h 2006-11-02 08:15:01.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/include/configs/sequoia.h 2006-11-30 12:34:13.000000000 -0600 +@@ -53,7 +53,7 @@ + + #define CFG_BOOT_BASE_ADDR 0xf0000000 + #define CFG_SDRAM_BASE 0x00000000 /* _must_ be 0 */ +-#define CFG_FLASH_BASE 0xfe000000 /* start of FLASH */ ++#define CFG_FLASH_BASE 0xfc000000 /* start of FLASH */ + #define CFG_MONITOR_BASE TEXT_BASE + #define CFG_NAND_ADDR 0xd0000000 /* NAND Flash */ + #define CFG_OCM_BASE 0xe0010000 /* ocm */ +@@ -102,6 +102,7 @@ + #define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */ + #else + #define CFG_ENV_IS_IN_NAND 1 /* use NAND for environment vars */ ++#define CFG_ENV_IS_EMBEDDED 1 /* use embedded environment */ + #endif + + /*----------------------------------------------------------------------- +@@ -234,10 +235,10 @@ + "bootm ${kernel_addr} ${ramdisk_addr}\0" \ + "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \ + "bootm\0" \ +- "rootpath=/opt/eldk/ppc_4xx\0" \ ++ "rootpath=/opt/eldk/ppc_4xxFP\0" \ + "bootfile=/tftpboot/sequoia/uImage\0" \ +- "kernel_addr=FE000000\0" \ +- "ramdisk_addr=FE180000\0" \ ++ "kernel_addr=FC000000\0" \ ++ "ramdisk_addr=FC180000\0" \ + "load=tftp 100000 /tftpboot/sequoia/u-boot.bin\0" \ + "update=protect off FFFA0000 FFFFFFFF;era FFFA0000 FFFFFFFF;" \ + "cp.b 100000 FFFA0000 60000\0" \ +@@ -378,7 +379,7 @@ + #define CFG_NAND_CS 3 /* NAND chip connected to CSx */ + /* Memory Bank 0 (NOR-FLASH) initialization */ + #define CFG_EBC_PB0AP 0x03017300 +-#define CFG_EBC_PB0CR (CFG_FLASH | 0xba000) ++#define CFG_EBC_PB0CR (CFG_FLASH | 0xda000) + + /* Memory Bank 3 (NAND-FLASH) initialization */ + #define CFG_EBC_PB3AP 0x018003c0 +@@ -387,7 +388,7 @@ + #define CFG_NAND_CS 0 /* NAND chip connected to CSx */ + /* Memory Bank 3 (NOR-FLASH) initialization */ + #define CFG_EBC_PB3AP 0x03017300 +-#define CFG_EBC_PB3CR (CFG_FLASH | 0xba000) ++#define CFG_EBC_PB3CR (CFG_FLASH | 0xda000) + + /* Memory Bank 0 (NAND-FLASH) initialization */ + #define CFG_EBC_PB0AP 0x018003c0 +diff -Naupr u-boot-1.1.6/include/configs/TQM5200.h u-boot-1.1.6-fsl-1/include/configs/TQM5200.h +--- u-boot-1.1.6/include/configs/TQM5200.h 2006-11-02 08:15:01.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/include/configs/TQM5200.h 2006-11-30 12:34:13.000000000 -0600 +@@ -217,43 +217,19 @@ + + #undef CONFIG_BOOTARGS + +-#ifdef CONFIG_STK52XX +-# if defined(CONFIG_TQM5200_B) +-# if defined(CFG_LOWBOOT) +-# define ENV_UPDT \ +- "update=protect off FC000000 FC07FFFF;" \ +- "erase FC000000 FC07FFFF;" \ +- "cp.b 200000 FC000000 ${filesize};" \ +- "protect on FC000000 FC07FFFF\0" +-# else /* highboot */ +-# define ENV_UPDT \ +- "update=protect off FFF00000 FFF7FFFF;" \ +- "erase FFF00000 FFF7FFFF;" \ ++#if defined(CONFIG_TQM5200_B) && !defined(CFG_LOWBOOT) ++# define ENV_UPDT \ ++ "update=protect off FFF00000 +${filesize};" \ ++ "erase FFF00000 +${filesize};" \ + "cp.b 200000 FFF00000 ${filesize};" \ +- "protect on FFF00000 FFF7FFFF\0" +-# endif /* CFG_LOWBOOT */ +-# else /* !CONFIG_TQM5200_B */ +-# define ENV_UPDT \ +- "update=protect off FC000000 FC05FFFF;" \ +- "erase FC000000 FC05FFFF;" \ +- "cp.b 200000 FC000000 ${filesize};" \ +- "protect on FC000000 FC05FFFF\0" +-# endif /* CONFIG_TQM5200_B */ +-#elif defined (CONFIG_CAM5200) +-# define ENV_UPDT \ +- "update=protect off FC000000 FC03FFFF;" \ +- "erase FC000000 FC03FFFF;" \ +- "cp.b 200000 FC000000 ${filesize};" \ +- "protect on FC000000 FC03FFFF\0" +-#elif defined (CONFIG_FO300) ++ "protect on FFF00000 +${filesize}\0" ++#else /* default lowboot configuration */ + # define ENV_UPDT \ +- "update=protect off FC000000 FC05FFFF;" \ +- "erase FC000000 FC05FFFF;" \ ++ "update=protect off FC000000 +${filesize};" \ ++ "erase FC000000 +${filesize};" \ + "cp.b 200000 FC000000 ${filesize};" \ +- "protect on FC000000 FC05FFFF\0" +-#else +-# error "Unknown Carrier Board" +-#endif /* CONFIG_STK52XX */ ++ "protect on FC000000 +${filesize}\0" ++#endif + + #define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ +@@ -432,7 +408,7 @@ + */ + #define CFG_ENV_IS_IN_FLASH 1 + #define CFG_ENV_SIZE 0x4000 /* 16 k - keep small for fast booting */ +-#if defined(CONFIG_TQM5200_B) ++#if defined(CONFIG_TQM5200_B) || defined (CONFIG_CAM5200) + #define CFG_ENV_SECT_SIZE 0x40000 + #else + #define CFG_ENV_SECT_SIZE 0x20000 +diff -Naupr u-boot-1.1.6/include/configs/TQM834x.h u-boot-1.1.6-fsl-1/include/configs/TQM834x.h +--- u-boot-1.1.6/include/configs/TQM834x.h 2006-11-02 08:15:01.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/include/configs/TQM834x.h 2006-11-10 11:24:30.000000000 -0600 +@@ -37,10 +37,11 @@ + #define CONFIG_E300 1 /* E300 Family */ + #define CONFIG_MPC83XX 1 /* MPC83XX family */ + #define CONFIG_MPC834X 1 /* MPC834X specific */ ++#define CONFIG_MPC8349 1 /* MPC8349 specific */ + #define CONFIG_TQM834X 1 /* TQM834X board specific */ + + /* IMMR Base Addres Register, use Freescale default: 0xff400000 */ +-#define CFG_IMMRBAR 0xff400000 ++#define CFG_IMMR 0xff400000 + + /* System clock. Primary input clock when in PCI host mode */ + #define CONFIG_83XX_CLKIN 66666000 /* 66,666 MHz */ +@@ -56,6 +57,17 @@ + */ + #define CFG_LCRR (LCRR_DBYP | LCRR_CLKDIV_8) + ++#define CFG_SCCR_INIT (SCCR_DEFAULT & (~SCCR_CLK_MASK)) ++#define CFG_SCCR_TSEC1CM SCCR_TSEC1CM_1 /* TSEC1 clock setting */ ++#define CFG_SCCR_TSEC2CM SCCR_TSEC2CM_1 /* TSEC2 clock setting */ ++#define CFG_SCCR_ENCCM SCCR_ENCCM_3 /* ENC clock setting */ ++#define CFG_SCCR_USBCM SCCR_USBCM_3 /* USB clock setting */ ++#define CFG_SCCR_VAL ( CFG_SCCR_INIT \ ++ | CFG_SCCR_TSEC1CM \ ++ | CFG_SCCR_TSEC2CM \ ++ | CFG_SCCR_ENCCM \ ++ | CFG_SCCR_USBCM ) ++ + /* board pre init: do not call, nothing to do */ + #undef CONFIG_BOARD_EARLY_INIT_F + +@@ -83,6 +95,7 @@ + #define CFG_FLASH_CFI_DRIVER /* use the CFI driver */ + #undef CFG_FLASH_CHECKSUM + #define CFG_FLASH_BASE 0x80000000 /* start of FLASH */ ++#define CFG_FLASH_SIZE 8 /* FLASH size in MB */ + + /* buffered writes in the AMD chip set is not supported yet */ + #undef CFG_FLASH_USE_BUFFER_WRITE +@@ -197,14 +210,15 @@ extern int tqm834x_num_flash_banks; + #define CFG_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200} + +-#define CFG_NS16550_COM1 (CFG_IMMRBAR + 0x4500) +-#define CFG_NS16550_COM2 (CFG_IMMRBAR + 0x4600) ++#define CFG_NS16550_COM1 (CFG_IMMR + 0x4500) ++#define CFG_NS16550_COM2 (CFG_IMMR + 0x4600) + + /* + * I2C + */ + #define CONFIG_HARD_I2C /* I2C with hardware support */ + #undef CONFIG_SOFT_I2C /* I2C bit-banged */ ++#define CONFIG_FSL_I2C + #define CFG_I2C_SPEED 400000 /* I2C speed: 400KHz */ + #define CFG_I2C_SLAVE 0x7F /* slave address */ + #define CFG_I2C_OFFSET 0x3000 +@@ -235,9 +249,9 @@ extern int tqm834x_num_flash_banks; + #define CONFIG_MII + + #define CFG_TSEC1_OFFSET 0x24000 +-#define CFG_TSEC1 (CFG_IMMRBAR + CFG_TSEC1_OFFSET) ++#define CFG_TSEC1 (CFG_IMMR + CFG_TSEC1_OFFSET) + #define CFG_TSEC2_OFFSET 0x25000 +-#define CFG_TSEC2 (CFG_IMMRBAR + CFG_TSEC2_OFFSET) ++#define CFG_TSEC2 (CFG_IMMR + CFG_TSEC2_OFFSET) + + #if defined(CONFIG_TSEC_ENET) + +@@ -460,8 +474,8 @@ extern int tqm834x_num_flash_banks; + #endif + + /* IMMRBAR */ +-#define CFG_IBAT6L (CFG_IMMRBAR | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +-#define CFG_IBAT6U (CFG_IMMRBAR | BATU_BL_1M | BATU_VS | BATU_VP) ++#define CFG_IBAT6L (CFG_IMMR | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) ++#define CFG_IBAT6U (CFG_IMMR | BATU_BL_1M | BATU_VS | BATU_VP) + + /* FLASH */ + #define CFG_IBAT7L (CFG_FLASH_BASE | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +diff -Naupr u-boot-1.1.6/include/configs/v38b.h u-boot-1.1.6-fsl-1/include/configs/v38b.h +--- u-boot-1.1.6/include/configs/v38b.h 1969-12-31 18:00:00.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/include/configs/v38b.h 2006-11-30 12:34:13.000000000 -0600 +@@ -0,0 +1,343 @@ ++/* ++ * (C) Copyright 2003-2006 Wolfgang Denk, DENX Software Engineering, ++ * wd@denx.de. ++ * ++ * See file CREDITS for list of people who contributed to this project. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License as published by the Free ++ * Software Foundation; either version 2 of the License, or (at your option) ++ * any later version. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ++ * for more details. ++ * ++ * You should have received a copy of the GNU General Public License along ++ * with this program; if not, write to the Free Software Foundation, Inc., 59 ++ * Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++#ifndef __CONFIG_H ++#define __CONFIG_H ++ ++/* ++ * High Level Configuration Options ++ * (easy to change) ++ */ ++#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */ ++#define CONFIG_MPC5200 1 /* This is an MPC5200 CPU */ ++#define CONFIG_V38B 1 /* ...on V38B board */ ++#define CFG_MPC5XXX_CLKIN 33000000 /* ...running at 33.000000MHz */ ++ ++#define CONFIG_RTC_PCF8563 1 /* has PCF8563 RTC */ ++#define CONFIG_MPC5200_DDR 1 /* has DDR SDRAM */ ++ ++#undef CONFIG_HW_WATCHDOG /* don't use watchdog */ ++ ++#define CONFIG_NETCONSOLE 1 ++ ++#define CONFIG_BOARD_EARLY_INIT_R 1 /* do board-specific init */ ++ ++#define CFG_XLB_PIPELINING 1 /* gives better performance */ ++ ++#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ ++#define BOOTFLAG_WARM 0x02 /* Software reboot */ ++ ++#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ ++#if (CONFIG_COMMANDS & CFG_CMD_KGDB) ++# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ ++#endif ++ ++/* ++ * Serial console configuration ++ */ ++#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */ ++#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */ ++#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } ++ ++/* ++ * DDR ++ */ ++#define SDRAM_DDR 1 /* is DDR */ ++/* Settings for XLB = 132 MHz */ ++#define SDRAM_MODE 0x018D0000 ++#define SDRAM_EMODE 0x40090000 ++#define SDRAM_CONTROL 0x704f0f00 ++#define SDRAM_CONFIG1 0x73722930 ++#define SDRAM_CONFIG2 0x47770000 ++#define SDRAM_TAPDELAY 0x10000000 ++ ++/* ++ * PCI - no suport ++ */ ++#undef CONFIG_PCI ++ ++/* ++ * Partitions ++ */ ++#define CONFIG_MAC_PARTITION 1 ++#define CONFIG_DOS_PARTITION 1 ++ ++/* ++ * USB ++ */ ++#define CONFIG_USB_OHCI ++#define CONFIG_USB_STORAGE ++#define CONFIG_USB_CLOCK 0x0001BBBB ++#define CONFIG_USB_CONFIG 0x00001000 ++ ++/* ++ * Supported commands ++ */ ++#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ ++ CFG_CMD_FAT | \ ++ CFG_CMD_I2C | \ ++ CFG_CMD_IDE | \ ++ CFG_CMD_PING | \ ++ CFG_CMD_DHCP | \ ++ CFG_CMD_DIAG | \ ++ CFG_CMD_IRQ | \ ++ CFG_CMD_JFFS2 | \ ++ CFG_CMD_MII | \ ++ CFG_CMD_SDRAMi | \ ++ CFG_CMD_DATE | \ ++ CFG_CMD_USB | \ ++ CFG_CMD_FAT) ++ ++#define CONFIG_TIMESTAMP /* Print image info with timestamp */ ++ ++/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ ++#include <cmd_confdefs.h> ++ ++/* ++ * Boot low with 16 MB Flash ++ */ ++#define CFG_LOWBOOT 1 ++#define CFG_LOWBOOT16 1 ++ ++/* ++ * Autobooting ++ */ ++#define CONFIG_BOOTDELAY 3 /* autoboot after 3 seconds */ ++ ++#define CONFIG_PREBOOT "echo;" \ ++ "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \ ++ "echo" ++ ++#undef CONFIG_BOOTARGS ++ ++#define CONFIG_EXTRA_ENV_SETTINGS \ ++ "bootcmd=run net_nfs\0" \ ++ "bootdelay=3\0" \ ++ "baudrate=115200\0" \ ++ "preboot=echo;echo Type \"run flash_nfs\" to mount root " \ ++ "filesystem over NFS; echo\0" \ ++ "netdev=eth0\0" \ ++ "ramargs=setenv bootargs root=/dev/ram rw\0" \ ++ "addip=setenv bootargs $(bootargs) " \ ++ "ip=$(ipaddr):$(serverip):$(gatewayip):" \ ++ "$(netmask):$(hostname):$(netdev):off panic=1\0" \ ++ "flash_nfs=run nfsargs addip;bootm $(kernel_addr)\0" \ ++ "flash_self=run ramargs addip;bootm $(kernel_addr) " \ ++ "$(ramdisk_addr)\0" \ ++ "net_nfs=tftp 200000 $(bootfile);run nfsargs addip;bootm\0" \ ++ "nfsargs=setenv bootargs root=/dev/nfs rw " \ ++ "nfsroot=$(serverip):$(rootpath)\0" \ ++ "hostname=v38b\0" \ ++ "ethact=FEC ETHERNET\0" \ ++ "rootpath=/opt/eldk-3.1.1/ppc_6xx\0" \ ++ "update=prot off ff000000 ff03ffff; era ff000000 ff03ffff; " \ ++ "cp.b 200000 ff000000 $(filesize);" \ ++ "prot on ff000000 ff03ffff\0" \ ++ "load=tftp 200000 $(u-boot)\0" \ ++ "netmask=255.255.0.0\0" \ ++ "ipaddr=192.168.160.18\0" \ ++ "serverip=192.168.1.1\0" \ ++ "ethaddr=00:e0:ee:00:05:2e\0" \ ++ "bootfile=/tftpboot/v38b/uImage\0" \ ++ "u-boot=/tftpboot/v38b/u-boot.bin\0" \ ++ "" ++ ++#define CONFIG_BOOTCOMMAND "run net_nfs" ++ ++#if defined(CONFIG_MPC5200) ++/* ++ * IPB Bus clocking configuration. ++ */ ++#undef CFG_IPBSPEED_133 /* define for 133MHz speed */ ++#endif ++ ++/* ++ * I2C configuration ++ */ ++#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ ++#define CFG_I2C_MODULE 2 /* Select I2C module #1 or #2 */ ++#define CFG_I2C_SPEED 100000 /* 100 kHz */ ++#define CFG_I2C_SLAVE 0x7F ++ ++/* ++ * EEPROM configuration ++ */ ++#define CFG_I2C_EEPROM_ADDR 0x50 /* 1010000x */ ++#define CFG_I2C_EEPROM_ADDR_LEN 1 ++#define CFG_EEPROM_PAGE_WRITE_BITS 3 ++#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 70 ++ ++/* ++ * RTC configuration ++ */ ++#define CFG_I2C_RTC_ADDR 0x51 ++ ++/* ++ * Flash configuration - use CFI driver ++ */ ++#define CFG_FLASH_CFI 1 /* Flash is CFI conformant */ ++#define CFG_FLASH_CFI_DRIVER 1 /* Use the common driver */ ++#define CFG_FLASH_CFI_AMD_RESET 1 ++#define CFG_FLASH_BASE 0xFF000000 ++#define CFG_MAX_FLASH_BANKS 1 /* max num of flash banks */ ++#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE } ++#define CFG_FLASH_SIZE 0x01000000 /* 16 MiB */ ++#define CFG_MAX_FLASH_SECT 256 /* max num of sects on one chip */ ++#define CFG_FLASH_USE_BUFFER_WRITE 1 /* flash write speed-up */ ++ ++/* ++ * Environment settings ++ */ ++#define CFG_ENV_IS_IN_FLASH 1 ++#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x00040000) ++#define CFG_ENV_SIZE 0x10000 ++#define CFG_ENV_SECT_SIZE 0x10000 ++#define CONFIG_ENV_OVERWRITE 1 ++ ++/* ++ * Memory map ++ */ ++#define CFG_MBAR 0xF0000000 ++#define CFG_SDRAM_BASE 0x00000000 ++#define CFG_DEFAULT_MBAR 0x80000000 ++ ++/* Use SRAM until RAM will be available */ ++#define CFG_INIT_RAM_ADDR MPC5XXX_SRAM ++#define CFG_INIT_RAM_END MPC5XXX_SRAM_SIZE /* End of used area in DPRAM */ ++ ++#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ ++#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) ++#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET ++ ++#define CFG_MONITOR_BASE TEXT_BASE ++#if (CFG_MONITOR_BASE < CFG_FLASH_BASE) ++# define CFG_RAMBOOT 1 ++#endif ++ ++#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256kB for Monitor */ ++#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128kB for malloc() */ ++#define CFG_BOOTMAPSZ (8 << 20) /* Linux initial memory map */ ++ ++/* ++ * Ethernet configuration ++ */ ++#define CONFIG_MPC5xxx_FEC 1 ++#define CONFIG_PHY_ADDR 0x00 ++#define CONFIG_MII 1 ++ ++/* ++ * GPIO configuration ++ */ ++#define CFG_GPS_PORT_CONFIG 0x90001404 ++ ++/* ++ * Miscellaneous configurable options ++ */ ++#define CFG_LONGHELP /* undef to save memory */ ++#define CFG_PROMPT "=> " /* Monitor Command Prompt */ ++#if (CONFIG_COMMANDS & CFG_CMD_KGDB) ++#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ ++#else ++#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ ++#endif ++#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ ++#define CFG_MAXARGS 16 /* max number of command args */ ++#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ ++ ++#define CFG_MEMTEST_START 0x00100000 /* memtest works on */ ++#define CFG_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */ ++ ++#define CFG_LOAD_ADDR 0x100000 /* default load address */ ++ ++#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ ++ ++/* ++ * Various low-level settings ++ */ ++#define CFG_HID0_INIT HID0_ICE | HID0_ICFI ++#define CFG_HID0_FINAL HID0_ICE ++ ++#define CFG_BOOTCS_START CFG_FLASH_BASE ++#define CFG_BOOTCS_SIZE CFG_FLASH_SIZE ++#define CFG_BOOTCS_CFG 0x00047801 ++#define CFG_CS0_START CFG_FLASH_BASE ++#define CFG_CS0_SIZE CFG_FLASH_SIZE ++ ++#define CFG_CS_BURST 0x00000000 ++#define CFG_CS_DEADCYCLE 0x33333333 ++ ++#define CFG_RESET_ADDRESS 0xff000000 ++ ++/* ++ * IDE/ATA (supports IDE harddisk) ++ */ ++#undef CONFIG_IDE_8xx_PCCARD /* Don't use IDE with PC Card Adapter */ ++#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ ++#undef CONFIG_IDE_LED /* LED for ide not supported */ ++ ++#define CONFIG_IDE_RESET /* reset for ide supported */ ++#define CONFIG_IDE_PREINIT ++ ++#define CFG_IDE_MAXBUS 1 /* max. 1 IDE bus */ ++#define CFG_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */ ++ ++#define CFG_ATA_IDE0_OFFSET 0x0000 ++ ++#define CFG_ATA_BASE_ADDR MPC5XXX_ATA ++ ++#define CFG_ATA_DATA_OFFSET (0x0060) /* data I/O offset */ ++ ++#define CFG_ATA_REG_OFFSET (CFG_ATA_DATA_OFFSET) /* normal register accesses offset */ ++ ++#define CFG_ATA_ALT_OFFSET (0x005C) /* alternate registers offset */ ++ ++#define CFG_ATA_STRIDE 4 /* Interval between registers */ ++ ++/* ++ * Status LED ++ */ ++#define CONFIG_STATUS_LED /* Status LED enabled */ ++#define CONFIG_BOARD_SPECIFIC_LED /* version has board specific leds */ ++ ++#define CFG_LED_BASE MPC5XXX_GPT7_ENABLE /* Timer 7 GPIO */ ++#ifndef __ASSEMBLY__ ++typedef unsigned int led_id_t; ++ ++#define __led_toggle(_msk) \ ++ do { \ ++ *((volatile long *) (CFG_LED_BASE)) ^= (_msk); \ ++ } while(0) ++ ++#define __led_set(_msk, _st) \ ++ do { \ ++ if ((_st)) \ ++ *((volatile long *) (CFG_LED_BASE)) &= ~(_msk); \ ++ else \ ++ *((volatile long *) (CFG_LED_BASE)) |= (_msk); \ ++ } while(0) ++ ++#define __led_init(_msk, st) \ ++ do { \ ++ *((volatile long *) (CFG_LED_BASE)) |= 0x34; \ ++ } while(0) ++#endif /* __ASSEMBLY__ */ ++ ++#endif /* __CONFIG_H */ +diff -Naupr u-boot-1.1.6/include/configs/V38B.h u-boot-1.1.6-fsl-1/include/configs/V38B.h +--- u-boot-1.1.6/include/configs/V38B.h 2006-11-02 08:15:01.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/include/configs/V38B.h 1969-12-31 18:00:00.000000000 -0600 +@@ -1,368 +0,0 @@ +-/* +- * (C) Copyright 2003-2004 Wolfgang Denk, DENX Software Engineering, +- * wd@denx.de. +- * +- * See file CREDITS for list of people who contributed to this project. +- * +- * This program is free software; you can redistribute it and/or modify it +- * under the terms of the GNU General Public License as published by the Free +- * Software Foundation; either version 2 of the License, or (at your option) +- * any later version. +- * +- * This program is distributed in the hope that it will be useful, but WITHOUT +- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or +- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License +- * for more details. +- * +- * You should have received a copy of the GNU General Public License along +- * with this program; if not, write to the Free Software Foundation, Inc., 59 +- * Temple Place, Suite 330, Boston, MA 02111-1307 USA +- */ +- +-#ifndef __CONFIG_H +-#define __CONFIG_H +- +-#if 0 +-#define DEBUG 0xFFF +-#endif +- +-#if 0 +-#define DEBUG 0x01 +-#endif +- +-/* +- * High Level Configuration Options +- * (easy to change) +-*/ +- +-#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */ +-#define CONFIG_MPC5200 1 /* This is an MPC5200 CPU */ +-#define CONFIG_V38B 1 /* ... on V38B board */ +-#define CFG_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */ +- +-#define CONFIG_RTC_PCF8563 1 /* has PCF8563 RTC */ +-#define CONFIG_MPC5200_DDR 1 /* has DDR SDRAM */ +-#define CONFIG_HW_WATCHDOG 1 /* has watchdog */ +- +-#define CONFIG_NETCONSOLE 1 +- +-#define CONFIG_BOARD_EARLY_INIT_R 1 /* make flash read/write */ +- +-#define CFG_XLB_PIPELINING 1 /* gives better performance */ +- +- +-#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +-#define BOOTFLAG_WARM 0x02 /* Software reboot */ +- +-#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ +-#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +-# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +-#endif +- +-/* +- * Serial console configuration +- */ +-#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */ +-#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */ +-#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } +- +- +-/* +- * DDR +- */ +-#define SDRAM_DDR 1 /* is DDR */ +-/* Settings for XLB = 132 MHz */ +-#define SDRAM_MODE 0x018D0000 +-#define SDRAM_EMODE 0x40090000 +-#define SDRAM_CONTROL 0x704f0f00 +-#define SDRAM_CONFIG1 0x73722930 +-#define SDRAM_CONFIG2 0x47770000 +-#define SDRAM_TAPDELAY 0x10000000 +- +- +-/* +- * PCI - no suport +- */ +-#undef CONFIG_PCI +- +-/* +- * Partitions +- */ +-#define CONFIG_MAC_PARTITION 1 +-#define CONFIG_DOS_PARTITION 1 +- +-/* +- * USB +- */ +-#define CONFIG_USB_OHCI +-#define CONFIG_USB_STORAGE +- +-#define CONFIG_TIMESTAMP /* Print image info with timestamp */ +- +-/* +- * Supported commands +- */ +-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ +- CFG_CMD_FAT | \ +- CFG_CMD_I2C | \ +- CFG_CMD_IDE | \ +- CFG_CMD_PING | \ +- CFG_CMD_DHCP | \ +- CFG_CMD_DIAG | \ +- CFG_CMD_IRQ | \ +- CFG_CMD_JFFS2 | \ +- CFG_CMD_MII | \ +- CFG_CMD_SDRAMi | \ +- CFG_CMD_DATE | \ +- CFG_CMD_USB | \ +- CFG_CMD_FAT) +- +-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +-#include <cmd_confdefs.h> +- +-/* +- * Boot low with 16 MB Flash +- */ +-# define CFG_LOWBOOT 1 +-# define CFG_LOWBOOT16 1 +- +-/* +- * Autobooting +- */ +-#define CONFIG_BOOTDELAY 3 /* autoboot after 3 seconds */ +- +-#define CONFIG_PREBOOT "echo;" \ +- "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \ +- "echo" +- +-#undef CONFIG_BOOTARGS +- +-#define CONFIG_EXTRA_ENV_SETTINGS \ +- "netdev=eth0\0" \ +- "devno=5\0" \ +- "hostname=V38B_$(devno)\0" \ +- "ipaddr=10.100.99.$(devno)\0" \ +- "netmask=255.255.0.0\0" \ +- "serverip=10.100.10.90\0" \ +- "gatewayip=10.100.254.254\0" \ +- "ramargs=setenv bootargs root=/dev/ram rw\0" \ +- "rootpath=/opt/eldk/ppc_6xx\0" \ +- "bootfile=mpc5200/uImage\0" \ +- "bootcmd=run net_nfs\0" \ +- "addip=setenv bootargs $(bootargs) " \ +- "ip=$(ipaddr):$(serverip):$(gatewayip):" \ +- "$(netmask):$(hostname):$(netdev):off panic=1\0" \ +- "flash_nfs=run nfsargs addip;bootm $(kernel_addr)\0" \ +- "flash_self=run ramargs addip;bootm $(kernel_addr) " \ +- "$(ramdisk_addr)\0" \ +- "net_nfs=tftp 200000 $(bootfile);run nfsargs " \ +- "addip;bootm\0" \ +- "nfsargs=setenv bootargs root=/dev/nfs rw " \ +- "nfsroot=$(serverip):$(rootpath)\0" \ +- "" +- +-#define CONFIG_BOOTCOMMAND "run net_nfs" +- +-#if defined(CONFIG_MPC5200) +-/* +- * IPB Bus clocking configuration. +- */ +-#undef CFG_IPBSPEED_133 /* define for 133MHz speed */ +-#endif +-/* +- * I2C configuration +- */ +-#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ +-#define CFG_I2C_MODULE 2 /* Select I2C module #1 or #2 */ +- +-#define CFG_I2C_SPEED 100000 /* 100 kHz */ +-#define CFG_I2C_SLAVE 0x7F +- +-/* +- * EEPROM configuration +- */ +-#define CFG_I2C_EEPROM_ADDR 0x50 /* 1010000x */ +-#define CFG_I2C_EEPROM_ADDR_LEN 1 +-#define CFG_EEPROM_PAGE_WRITE_BITS 3 +-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 70 +- +-/* +- * RTC configuration +- */ +-#define CFG_I2C_RTC_ADDR 0x51 +- +-/* +- * Flash configuration - use CFI driver +- */ +-#define CFG_FLASH_CFI 1 /* Flash is CFI conformant */ +-#define CFG_FLASH_CFI_DRIVER 1 /* Use the common driver */ +-#define CFG_FLASH_CFI_AMD_RESET 1 +-#define CFG_FLASH_BASE 0xFF000000 +-#define CFG_MAX_FLASH_BANKS 1 /* max num of flash banks */ +-#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE } +-#define CFG_FLASH_SIZE 0x01000000 /* 16 MiB */ +-#define CFG_MAX_FLASH_SECT 256 /* max num of sects on one chip */ +-#define CFG_FLASH_USE_BUFFER_WRITE 1 /* flash write speed-up */ +- +-/* +- * Environment settings +- */ +-#define CFG_ENV_IS_IN_FLASH 1 +-#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x00040000) +-#define CFG_ENV_SIZE 0x10000 +-#define CFG_ENV_SECT_SIZE 0x10000 +-#define CONFIG_ENV_OVERWRITE 1 +- +-/* +- * Memory map +- */ +-#define CFG_MBAR 0xF0000000 +-#define CFG_SDRAM_BASE 0x00000000 +-#define CFG_DEFAULT_MBAR 0x80000000 +- +-/* Use SRAM until RAM will be available */ +-#define CFG_INIT_RAM_ADDR MPC5XXX_SRAM +-#define CFG_INIT_RAM_END MPC5XXX_SRAM_SIZE /* End of used area in DPRAM */ +- +- +-#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ +-#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +-#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET +- +-#define CFG_MONITOR_BASE TEXT_BASE +-#if (CFG_MONITOR_BASE < CFG_FLASH_BASE) +-# define CFG_RAMBOOT 1 +-#endif +- +-#define CFG_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */ +-#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ +-#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ +- +-/* +- * Ethernet configuration +- */ +-#define CONFIG_MPC5xxx_FEC 1 +-#define CONFIG_PHY_ADDR 0x00 +-#define CONFIG_MII 1 +- +-/* +- * GPIO configuration +- */ +-#define CFG_GPS_PORT_CONFIG 0x90000404 +- +-/* +- * Miscellaneous configurable options +- */ +-#define CFG_LONGHELP /* undef to save memory */ +-#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +-#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +-#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +-#else +-#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +-#endif +-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +-#define CFG_MAXARGS 16 /* max number of command args */ +-#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +- +-#define CFG_MEMTEST_START 0x00100000 /* memtest works on */ +-#define CFG_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */ +- +-#define CFG_LOAD_ADDR 0x100000 /* default load address */ +- +-#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ +- +-/* +- * Various low-level settings +- */ +-#if defined(CONFIG_MPC5200) +-#define CFG_HID0_INIT HID0_ICE | HID0_ICFI +-#define CFG_HID0_FINAL HID0_ICE +-#else +-#define CFG_HID0_INIT 0 +-#define CFG_HID0_FINAL 0 +-#endif +- +- +-#define CFG_BOOTCS_START CFG_FLASH_BASE +-#define CFG_BOOTCS_SIZE CFG_FLASH_SIZE +-#define CFG_BOOTCS_CFG 0x00047801 +-#define CFG_CS0_START CFG_FLASH_BASE +-#define CFG_CS0_SIZE CFG_FLASH_SIZE +- +-#define CFG_CS_BURST 0x00000000 +-#define CFG_CS_DEADCYCLE 0x33333333 +- +-#define CFG_RESET_ADDRESS 0xff000000 +- +-/*----------------------------------------------------------------------- +- * USB stuff +- *----------------------------------------------------------------------- +- */ +-#define CONFIG_USB_CLOCK 0x0001BBBB +-#define CONFIG_USB_CONFIG 0x00001000 +- +- +-/*----------------------------------------------------------------------- +- * IDE/ATA stuff Supports IDE harddisk +- *----------------------------------------------------------------------- +- */ +- +-#undef CONFIG_IDE_8xx_PCCARD /* Don't use IDE with PC Card Adapter */ +- +-#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ +-#undef CONFIG_IDE_LED /* LED for ide not supported */ +- +-#define CONFIG_IDE_RESET /* reset for ide supported */ +-#define CONFIG_IDE_PREINIT +- +-#define CFG_IDE_MAXBUS 1 /* max. 1 IDE bus */ +-#define CFG_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */ +- +-#define CFG_ATA_IDE0_OFFSET 0x0000 +- +-#define CFG_ATA_BASE_ADDR MPC5XXX_ATA +- +-/* Offset for data I/O */ +-#define CFG_ATA_DATA_OFFSET (0x0060) +- +-/* Offset for normal register accesses */ +-#define CFG_ATA_REG_OFFSET (CFG_ATA_DATA_OFFSET) +- +-/* Offset for alternate registers */ +-#define CFG_ATA_ALT_OFFSET (0x005C) +- +-/* Interval between registers */ +-#define CFG_ATA_STRIDE 4 +- +-/* Status LED */ +- +-#define CONFIG_STATUS_LED /* Status LED enabled */ +-#define CONFIG_BOARD_SPECIFIC_LED /* version has board specific leds */ +- +-#define CFG_LED_BASE (0xf0000600 + 0x70) /* Timer 7 GPIO */ +- +-#ifndef __ASSEMBLY__ +-/* LEDs */ +-typedef unsigned int led_id_t; +- +-#define __led_toggle(_msk) \ +- do { \ +- *((volatile long *) (CFG_LED_BASE)) ^= (_msk); \ +- } while(0) +- +-#define __led_set(_msk, _st) \ +- do { \ +- if ((_st)) \ +- *((volatile long *) (CFG_LED_BASE)) &= ~(_msk); \ +- else \ +- *((volatile long *) (CFG_LED_BASE)) |= (_msk); \ +- } while(0) +- +-#define __led_init(_msk, st) \ +- { \ +- *((volatile long *) (CFG_LED_BASE)) |= 0x34; \ +- } +- +-#endif +- +-#endif /* __CONFIG_H */ +diff -Naupr u-boot-1.1.6/include/configs/yellowstone.h u-boot-1.1.6-fsl-1/include/configs/yellowstone.h +--- u-boot-1.1.6/include/configs/yellowstone.h 2006-11-02 08:15:01.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/include/configs/yellowstone.h 2006-11-30 12:34:13.000000000 -0600 +@@ -37,6 +37,7 @@ + + #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ + #define CONFIG_MISC_INIT_R 1 /* call misc_init_r() */ ++#define CONFIG_BOARD_RESET 1 /* call board_reset() */ + + /*----------------------------------------------------------------------- + * Base addresses -- Note these are effective addresses where the +diff -Naupr u-boot-1.1.6/include/configs/yosemite.h u-boot-1.1.6-fsl-1/include/configs/yosemite.h +--- u-boot-1.1.6/include/configs/yosemite.h 2006-11-02 08:15:01.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/include/configs/yosemite.h 2006-11-30 12:34:13.000000000 -0600 +@@ -37,6 +37,7 @@ + + #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ + #define CONFIG_MISC_INIT_R 1 /* call misc_init_r() */ ++#define CONFIG_BOARD_RESET 1 /* call board_reset() */ + + /*----------------------------------------------------------------------- + * Base addresses -- Note these are effective addresses where the +diff -Naupr u-boot-1.1.6/include/environment.h u-boot-1.1.6-fsl-1/include/environment.h +--- u-boot-1.1.6/include/environment.h 2006-11-02 08:15:01.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/include/environment.h 2006-11-30 12:34:13.000000000 -0600 +@@ -79,8 +79,7 @@ + # ifdef CFG_ENV_OFFSET_REDUND + # define CFG_REDUNDAND_ENVIRONMENT + # endif +-# if defined(CONFIG_NAND_U_BOOT) +-/* Use embedded environment in NAND boot versions */ ++# ifdef CFG_ENV_IS_EMBEDDED + # define ENV_IS_EMBEDDED 1 + # endif + #endif /* CFG_ENV_IS_IN_NAND */ +diff -Naupr u-boot-1.1.6/include/flash.h u-boot-1.1.6-fsl-1/include/flash.h +--- u-boot-1.1.6/include/flash.h 2006-11-02 08:15:01.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/include/flash.h 2006-11-30 12:34:13.000000000 -0600 +@@ -43,9 +43,14 @@ typedef struct { + ulong write_tout; /* maximum write timeout */ + ulong buffer_write_tout; /* maximum buffer write timeout */ + ushort vendor; /* the primary vendor id */ +- ushort cmd_reset; /* Vendor specific reset command */ ++ ushort cmd_reset; /* vendor specific reset command */ + ushort interface; /* used for x8/x16 adjustments */ + ushort legacy_unlock; /* support Intel legacy (un)locking */ ++ uchar manufacturer_id; /* manufacturer id */ ++ ushort device_id; /* device id */ ++ ushort device_id2; /* extended device id */ ++ ushort ext_addr; /* extended query table address */ ++ ushort cfi_version; /* cfi version */ + #endif + } flash_info_t; + +@@ -439,6 +444,7 @@ extern void flash_read_factory_serial(fl + #define FLASH_MAN_MT 0x00400000 + #define FLASH_MAN_SHARP 0x00500000 + #define FLASH_MAN_ATM 0x00600000 ++#define FLASH_MAN_CFI 0x01000000 + + + #define FLASH_TYPEMASK 0x0000FFFF /* extract FLASH type information */ +diff -Naupr u-boot-1.1.6/include/i2c.h u-boot-1.1.6-fsl-1/include/i2c.h +--- u-boot-1.1.6/include/i2c.h 2006-11-02 08:15:01.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/include/i2c.h 2006-11-10 11:24:30.000000000 -0600 +@@ -82,4 +82,49 @@ int i2c_write(uchar chip, uint addr, int + uchar i2c_reg_read (uchar chip, uchar reg); + void i2c_reg_write(uchar chip, uchar reg, uchar val); + ++/* ++ * Functions for setting the current I2C bus and its speed ++ */ ++ ++/* ++ * i2c_set_bus_num: ++ * ++ * Change the active I2C bus. Subsequent read/write calls will ++ * go to this one. ++ * ++ * bus - bus index, zero based ++ * ++ * Returns: 0 on success, not 0 on failure ++ * ++ */ ++int i2c_set_bus_num(unsigned int bus); ++ ++/* ++ * i2c_get_bus_num: ++ * ++ * Returns index of currently active I2C bus. Zero-based. ++ */ ++ ++unsigned int i2c_get_bus_num(void); ++ ++/* ++ * i2c_set_bus_speed: ++ * ++ * Change the speed of the active I2C bus ++ * ++ * speed - bus speed in Hz ++ * ++ * Returns: 0 on success, not 0 on failure ++ * ++ */ ++int i2c_set_bus_speed(unsigned int); ++ ++/* ++ * i2c_get_bus_speed: ++ * ++ * Returns speed of currently active I2C bus in Hz ++ */ ++ ++unsigned int i2c_get_bus_speed(void); ++ + #endif /* _I2C_H_ */ +diff -Naupr u-boot-1.1.6/include/ioports.h u-boot-1.1.6-fsl-1/include/ioports.h +--- u-boot-1.1.6/include/ioports.h 2006-11-02 08:15:01.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/include/ioports.h 2006-12-06 10:33:49.000000000 -0600 +@@ -53,3 +53,13 @@ typedef struct { + * like the table in the 8260UM (and in the hymod manuals). + */ + extern const iop_conf_t iop_conf_tab[4][32]; ++ ++typedef struct { ++ unsigned char port; ++ unsigned char pin; ++ int dir; ++ int open_drain; ++ int assign; ++} qe_iop_conf_t; ++ ++#define QE_IOP_TAB_END (-1) +diff -Naupr u-boot-1.1.6/include/mpc5xxx.h u-boot-1.1.6-fsl-1/include/mpc5xxx.h +--- u-boot-1.1.6/include/mpc5xxx.h 2006-11-02 08:15:01.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/include/mpc5xxx.h 2006-11-10 11:24:30.000000000 -0600 +@@ -188,7 +188,14 @@ + #define MPC5XXX_WU_GPIO_ENABLE (MPC5XXX_WU_GPIO + 0x0000) + #define MPC5XXX_WU_GPIO_ODE (MPC5XXX_WU_GPIO + 0x0004) + #define MPC5XXX_WU_GPIO_DIR (MPC5XXX_WU_GPIO + 0x0008) +-#define MPC5XXX_WU_GPIO_DATA (MPC5XXX_WU_GPIO + 0x000c) ++#define MPC5XXX_WU_GPIO_DATA_O (MPC5XXX_WU_GPIO + 0x000c) ++#define MPC5XXX_WU_GPIO_DATA_I (MPC5XXX_WU_GPIO + 0x0020) ++ ++/* GPIO pins */ ++#define GPIO_WKUP_7 0x80000000UL ++#define GPIO_PSC6_0 0x10000000UL ++#define GPIO_PSC3_9 0x04000000UL ++#define GPIO_PSC1_4 0x01000000UL + + /* PCI registers */ + #define MPC5XXX_PCI_CMD (MPC5XXX_PCI + 0x04) +diff -Naupr u-boot-1.1.6/include/mpc83xx.h u-boot-1.1.6-fsl-1/include/mpc83xx.h +--- u-boot-1.1.6/include/mpc83xx.h 2006-11-02 08:15:01.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/include/mpc83xx.h 2006-11-10 11:24:30.000000000 -0600 +@@ -1,5 +1,5 @@ + /* +- * Copyright 2004 Freescale Semiconductor, Inc. ++ * Copyright (C) 2004-2006 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. +@@ -8,16 +8,6 @@ + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. +- * +- * This program is distributed in the hope that it will be useful, +- * but WITHOUT ANY WARRANTY; without even the implied warranty of +- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +- * GNU General Public License for more details. +- * +- * You should have received a copy of the GNU General Public License +- * along with this program; if not, write to the Free Software +- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, +- * MA 02111-1307 USA + */ + + /* +@@ -29,6 +19,7 @@ + #ifndef __MPC83XX_H__ + #define __MPC83XX_H__ + ++#include <config.h> + #if defined(CONFIG_E300) + #include <asm/e300.h> + #endif +@@ -85,6 +76,33 @@ + #define LBLAWBAR3 0x0038 + #define LBLAWAR3 0x003C + ++/* ++ * The device ID and revision numbers ++ */ ++#define SPR_8349E_REV10 0x80300100 ++#define SPR_8349_REV10 0x80310100 ++#define SPR_8347E_REV10_TBGA 0x80320100 ++#define SPR_8347_REV10_TBGA 0x80330100 ++#define SPR_8347E_REV10_PBGA 0x80340100 ++#define SPR_8347_REV10_PBGA 0x80350100 ++#define SPR_8343E_REV10 0x80360100 ++#define SPR_8343_REV10 0x80370100 ++ ++#define SPR_8349E_REV11 0x80300101 ++#define SPR_8349_REV11 0x80310101 ++#define SPR_8347E_REV11_TBGA 0x80320101 ++#define SPR_8347_REV11_TBGA 0x80330101 ++#define SPR_8347E_REV11_PBGA 0x80340101 ++#define SPR_8347_REV11_PBGA 0x80350101 ++#define SPR_8343E_REV11 0x80360101 ++#define SPR_8343_REV11 0x80370101 ++ ++#define SPR_8360E_REV10 0x80480010 ++#define SPR_8360_REV10 0x80490010 ++#define SPR_8360E_REV11 0x80480011 ++#define SPR_8360_REV11 0x80490011 ++#define SPR_8360E_REV12 0x80480012 ++#define SPR_8360_REV12 0x80490012 + + /* + * Base Registers & Option Registers +@@ -116,9 +134,17 @@ + #define BR_MS_UPMA 0x00000080 /* UPMA */ + #define BR_MS_UPMB 0x000000A0 /* UPMB */ + #define BR_MS_UPMC 0x000000C0 /* UPMC */ ++#if defined (CONFIG_MPC8360) ++#define BR_ATOM 0x0000000C ++#define BR_ATOM_SHIFT 2 ++#endif + #define BR_V 0x00000001 + #define BR_V_SHIFT 0 ++#if defined (CONFIG_MPC8349) + #define BR_RES ~(BR_BA|BR_PS|BR_DECC|BR_WP|BR_MSEL|BR_V) ++#elif defined (CONFIG_MPC8360) ++#define BR_RES ~(BR_BA|BR_PS|BR_DECC|BR_WP|BR_MSEL|BR_ATOM|BR_V) ++#endif + + #define OR0 0x5004 + #define OR1 0x500C +@@ -201,14 +227,21 @@ + #define HRCWH_PCI_AGENT 0x00000000 + #define HRCWH_PCI_HOST 0x80000000 + ++#if defined (CONFIG_MPC8349) + #define HRCWH_32_BIT_PCI 0x00000000 + #define HRCWH_64_BIT_PCI 0x40000000 ++#endif + + #define HRCWH_PCI1_ARBITER_DISABLE 0x00000000 + #define HRCWH_PCI1_ARBITER_ENABLE 0x20000000 + ++#if defined (CONFIG_MPC8349) + #define HRCWH_PCI2_ARBITER_DISABLE 0x00000000 + #define HRCWH_PCI2_ARBITER_ENABLE 0x10000000 ++#elif defined (CONFIG_MPC8360) ++#define HRCWH_PCICKDRV_DISABLE 0x00000000 ++#define HRCWH_PCICKDRV_ENABLE 0x10000000 ++#endif + + #define HRCWH_CORE_DISABLE 0x08000000 + #define HRCWH_CORE_ENABLE 0x00000000 +@@ -225,11 +258,14 @@ + + #define HRCWH_ROM_LOC_DDR_SDRAM 0x00000000 + #define HRCWH_ROM_LOC_PCI1 0x00100000 ++#if defined (CONFIG_MPC8349) + #define HRCWH_ROM_LOC_PCI2 0x00200000 ++#endif + #define HRCWH_ROM_LOC_LOCAL_8BIT 0x00500000 + #define HRCWH_ROM_LOC_LOCAL_16BIT 0x00600000 + #define HRCWH_ROM_LOC_LOCAL_32BIT 0x00700000 + ++#if defined (CONFIG_MPC8349) + #define HRCWH_TSEC1M_IN_RGMII 0x00000000 + #define HRCWH_TSEC1M_IN_RTBI 0x00004000 + #define HRCWH_TSEC1M_IN_GMII 0x00008000 +@@ -239,10 +275,22 @@ + #define HRCWH_TSEC2M_IN_RTBI 0x00001000 + #define HRCWH_TSEC2M_IN_GMII 0x00002000 + #define HRCWH_TSEC2M_IN_TBI 0x00003000 ++#endif ++ ++#if defined (CONFIG_MPC8360) ++#define HRCWH_SECONDARY_DDR_DISABLE 0x00000000 ++#define HRCWH_SECONDARY_DDR_ENABLE 0x00000010 ++#endif + + #define HRCWH_BIG_ENDIAN 0x00000000 + #define HRCWH_LITTLE_ENDIAN 0x00000008 + ++#define HRCWH_LALE_NORMAL 0x00000000 ++#define HRCWH_LALE_EARLY 0x00000004 ++ ++#define HRCWH_LDP_SET 0x00000000 ++#define HRCWH_LDP_CLEAR 0x00000002 ++ + /* + * Hard Reset Configration Word - Low + */ +@@ -281,6 +329,47 @@ + #define HRCWL_CORE_TO_CSB_2_5X1 0x00050000 + #define HRCWL_CORE_TO_CSB_3X1 0x00060000 + ++#if defined (CONFIG_MPC8360) ++#define HRCWL_CE_PLL_VCO_DIV_4 0x00000000 ++#define HRCWL_CE_PLL_VCO_DIV_8 0x00000040 ++#define HRCWL_CE_PLL_VCO_DIV_2 0x00000080 ++ ++#define HRCWL_CE_PLL_DIV_1X1 0x00000000 ++#define HRCWL_CE_PLL_DIV_2X1 0x00000020 ++ ++#define HRCWL_CE_TO_PLL_1X16_ 0x00000000 ++#define HRCWL_CE_TO_PLL_1X2 0x00000002 ++#define HRCWL_CE_TO_PLL_1X3 0x00000003 ++#define HRCWL_CE_TO_PLL_1X4 0x00000004 ++#define HRCWL_CE_TO_PLL_1X5 0x00000005 ++#define HRCWL_CE_TO_PLL_1X6 0x00000006 ++#define HRCWL_CE_TO_PLL_1X7 0x00000007 ++#define HRCWL_CE_TO_PLL_1X8 0x00000008 ++#define HRCWL_CE_TO_PLL_1X9 0x00000009 ++#define HRCWL_CE_TO_PLL_1X10 0x0000000A ++#define HRCWL_CE_TO_PLL_1X11 0x0000000B ++#define HRCWL_CE_TO_PLL_1X12 0x0000000C ++#define HRCWL_CE_TO_PLL_1X13 0x0000000D ++#define HRCWL_CE_TO_PLL_1X14 0x0000000E ++#define HRCWL_CE_TO_PLL_1X15 0x0000000F ++#define HRCWL_CE_TO_PLL_1X16 0x00000010 ++#define HRCWL_CE_TO_PLL_1X17 0x00000011 ++#define HRCWL_CE_TO_PLL_1X18 0x00000012 ++#define HRCWL_CE_TO_PLL_1X19 0x00000013 ++#define HRCWL_CE_TO_PLL_1X20 0x00000014 ++#define HRCWL_CE_TO_PLL_1X21 0x00000015 ++#define HRCWL_CE_TO_PLL_1X22 0x00000016 ++#define HRCWL_CE_TO_PLL_1X23 0x00000017 ++#define HRCWL_CE_TO_PLL_1X24 0x00000018 ++#define HRCWL_CE_TO_PLL_1X25 0x00000019 ++#define HRCWL_CE_TO_PLL_1X26 0x0000001A ++#define HRCWL_CE_TO_PLL_1X27 0x0000001B ++#define HRCWL_CE_TO_PLL_1X28 0x0000001C ++#define HRCWL_CE_TO_PLL_1X29 0x0000001D ++#define HRCWL_CE_TO_PLL_1X30 0x0000001E ++#define HRCWL_CE_TO_PLL_1X31 0x0000001F ++#endif ++ + /* + * LCRR - Clock Ratio Register (10.3.1.16) + */ +@@ -310,4 +399,31 @@ + #define LCRR_CLKDIV_8 0x00000008 + #define LCRR_CLKDIV_SHIFT 0 + ++/* ++ * SCCR-System Clock Control Register ++ */ ++#define SCCR_TSEC1CM_0 0x00000000 ++#define SCCR_TSEC1CM_1 0x40000000 ++#define SCCR_TSEC1CM_2 0x80000000 ++#define SCCR_TSEC1CM_3 0xC0000000 ++#define SCCR_TSEC2CM_0 0x00000000 ++#define SCCR_TSEC2CM_1 0x10000000 ++#define SCCR_TSEC2CM_2 0x20000000 ++#define SCCR_TSEC2CM_3 0x30000000 ++#define SCCR_ENCCM_0 0x00000000 ++#define SCCR_ENCCM_1 0x01000000 ++#define SCCR_ENCCM_2 0x02000000 ++#define SCCR_ENCCM_3 0x03000000 ++#define SCCR_USBCM_0 0x00000000 ++#define SCCR_USBCM_1 0x00500000 ++#define SCCR_USBCM_2 0x00A00000 ++#define SCCR_USBCM_3 0x00F00000 ++ ++#define SCCR_CLK_MASK ( SCCR_TSEC1CM_3 \ ++ | SCCR_TSEC2CM_3 \ ++ | SCCR_ENCCM_3 \ ++ | SCCR_USBCM_3 ) ++ ++#define SCCR_DEFAULT 0xFFFFFFFF ++ + #endif /* __MPC83XX_H__ */ +diff -Naupr u-boot-1.1.6/include/ppc440.h u-boot-1.1.6-fsl-1/include/ppc440.h +--- u-boot-1.1.6/include/ppc440.h 2006-11-02 08:15:01.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/include/ppc440.h 2006-12-06 10:33:49.000000000 -0600 +@@ -1350,26 +1350,26 @@ + + #if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX) + #define UIC2_DCR_BASE 0xe0 +-#define uic2sr (UIC0_DCR_BASE+0x0) /* UIC2 status-Read Clear */ +-#define uic2srs (UIC0_DCR_BASE+0x1) /* UIC2 status-Read Set */ +-#define uic2er (UIC0_DCR_BASE+0x2) /* UIC2 enable */ +-#define uic2cr (UIC0_DCR_BASE+0x3) /* UIC2 critical */ +-#define uic2pr (UIC0_DCR_BASE+0x4) /* UIC2 polarity */ +-#define uic2tr (UIC0_DCR_BASE+0x5) /* UIC2 triggering */ +-#define uic2msr (UIC0_DCR_BASE+0x6) /* UIC2 masked status */ +-#define uic2vr (UIC0_DCR_BASE+0x7) /* UIC2 vector */ +-#define uic2vcr (UIC0_DCR_BASE+0x8) /* UIC2 vector configuration */ ++#define uic2sr (UIC2_DCR_BASE+0x0) /* UIC2 status-Read Clear */ ++#define uic2srs (UIC2_DCR_BASE+0x1) /* UIC2 status-Read Set */ ++#define uic2er (UIC2_DCR_BASE+0x2) /* UIC2 enable */ ++#define uic2cr (UIC2_DCR_BASE+0x3) /* UIC2 critical */ ++#define uic2pr (UIC2_DCR_BASE+0x4) /* UIC2 polarity */ ++#define uic2tr (UIC2_DCR_BASE+0x5) /* UIC2 triggering */ ++#define uic2msr (UIC2_DCR_BASE+0x6) /* UIC2 masked status */ ++#define uic2vr (UIC2_DCR_BASE+0x7) /* UIC2 vector */ ++#define uic2vcr (UIC2_DCR_BASE+0x8) /* UIC2 vector configuration */ + + #define UIC3_DCR_BASE 0xf0 +-#define uic3sr (UIC1_DCR_BASE+0x0) /* UIC3 status-Read Clear */ +-#define uic3srs (UIC0_DCR_BASE+0x1) /* UIC3 status-Read Set */ +-#define uic3er (UIC1_DCR_BASE+0x2) /* UIC3 enable */ +-#define uic3cr (UIC1_DCR_BASE+0x3) /* UIC3 critical */ +-#define uic3pr (UIC1_DCR_BASE+0x4) /* UIC3 polarity */ +-#define uic3tr (UIC1_DCR_BASE+0x5) /* UIC3 triggering */ +-#define uic3msr (UIC1_DCR_BASE+0x6) /* UIC3 masked status */ +-#define uic3vr (UIC1_DCR_BASE+0x7) /* UIC3 vector */ +-#define uic3vcr (UIC1_DCR_BASE+0x8) /* UIC3 vector configuration */ ++#define uic3sr (UIC3_DCR_BASE+0x0) /* UIC3 status-Read Clear */ ++#define uic3srs (UIC3_DCR_BASE+0x1) /* UIC3 status-Read Set */ ++#define uic3er (UIC3_DCR_BASE+0x2) /* UIC3 enable */ ++#define uic3cr (UIC3_DCR_BASE+0x3) /* UIC3 critical */ ++#define uic3pr (UIC3_DCR_BASE+0x4) /* UIC3 polarity */ ++#define uic3tr (UIC3_DCR_BASE+0x5) /* UIC3 triggering */ ++#define uic3msr (UIC3_DCR_BASE+0x6) /* UIC3 masked status */ ++#define uic3vr (UIC3_DCR_BASE+0x7) /* UIC3 vector */ ++#define uic3vcr (UIC3_DCR_BASE+0x8) /* UIC3 vector configuration */ + #endif /* CONFIG_440SPE */ + + #if defined(CONFIG_440GX) +@@ -3183,7 +3183,7 @@ + #define GPIO0 0 + #define GPIO1 1 + +-#if defined(CONFIG_440GP) ++#if defined(CONFIG_440GP) || defined(CONFIG_440GX) + #define GPIO0_BASE (CFG_PERIPHERAL_BASE+0x00000700) + + #define GPIO0_OR (GPIO0_BASE+0x0) +diff -Naupr u-boot-1.1.6/lib_ppc/board.c u-boot-1.1.6-fsl-1/lib_ppc/board.c +--- u-boot-1.1.6/lib_ppc/board.c 2006-11-02 08:15:01.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/lib_ppc/board.c 2006-12-06 10:33:49.000000000 -0600 +@@ -511,7 +511,7 @@ void board_init_f (ulong bootflag) + bd->bi_mbar_base = CFG_MBAR; /* base of internal registers */ + #endif + #if defined(CONFIG_MPC83XX) +- bd->bi_immrbar = CFG_IMMRBAR; ++ bd->bi_immrbar = CFG_IMMR; + #endif + #if defined(CONFIG_MPC8220) + bd->bi_mbar_base = CFG_MBAR; /* base of internal registers */ +@@ -521,17 +521,17 @@ void board_init_f (ulong bootflag) + bd->bi_pevfreq = gd->pev_clk; + bd->bi_flbfreq = gd->flb_clk; + +- /* store bootparam to sram (backward compatible), here? */ +- { +- u32 *sram = (u32 *)CFG_SRAM_BASE; +- *sram++ = gd->ram_size; +- *sram++ = gd->bus_clk; +- *sram++ = gd->inp_clk; +- *sram++ = gd->cpu_clk; +- *sram++ = gd->vco_clk; +- *sram++ = gd->flb_clk; +- *sram++ = 0xb8c3ba11; /* boot signature */ +- } ++ /* store bootparam to sram (backward compatible), here? */ ++ { ++ u32 *sram = (u32 *)CFG_SRAM_BASE; ++ *sram++ = gd->ram_size; ++ *sram++ = gd->bus_clk; ++ *sram++ = gd->inp_clk; ++ *sram++ = gd->cpu_clk; ++ *sram++ = gd->vco_clk; ++ *sram++ = gd->flb_clk; ++ *sram++ = 0xb8c3ba11; /* boot signature */ ++ } + #endif + + bd->bi_bootflags = bootflag; /* boot / reboot flag (for LynxOS) */ +diff -Naupr u-boot-1.1.6/MAINTAINERS u-boot-1.1.6-fsl-1/MAINTAINERS +--- u-boot-1.1.6/MAINTAINERS 2006-11-02 08:15:01.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/MAINTAINERS 2006-12-06 10:33:48.000000000 -0600 +@@ -277,10 +277,13 @@ Daniel Poirot <dan.poirot@windriver.com> + + Stefan Roese <sr@denx.de> + ++ P3M7448 MPC7448 ++ + uc100 MPC857 + + TQM85xx MPC8540/8541/8555/8560 + ++ alpr PPC440GX + bamboo PPC440EP + bunbinga PPC405EP + ebony PPC440GP +@@ -293,6 +296,8 @@ Stefan Roese <sr@denx.de> + yellowstone PPC440GR + yosemite PPC440EP + ++ P3M750 PPC750FX/GX/GL ++ + Yusdi Santoso <yusdi_santoso@adaptec.com> + + HIDDEN_DRAGON MPC8241/MPC8245 +@@ -339,6 +344,18 @@ John Zhan <zhanz@sinovee.com> + + svm_sc8xx MPC8xx + ++Timur Tabi <timur@freescale.com> ++ ++ MPC8349E-mITX MPC8349 ++ ++Kim Phillips <kim.phillips@freescale.com> ++ ++ MPC8349EMDS MPC8349 ++ ++Dave Liu <daveliu@freescale.com> ++ ++ MPC8360EMDS MPC8360 ++ + ------------------------------------------------------------------------- + + Unknown / orphaned boards: +diff -Naupr u-boot-1.1.6/MAKEALL u-boot-1.1.6-fsl-1/MAKEALL +--- u-boot-1.1.6/MAKEALL 2006-11-02 08:15:01.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/MAKEALL 2006-12-06 10:33:48.000000000 -0600 +@@ -74,21 +74,21 @@ LIST_8xx=" \ + ######################################################################### + + LIST_4xx=" \ +- ADCIOP AP1000 AR405 ASH405 \ +- bamboo bubinga CANBT CMS700 \ +- CPCI2DP CPCI405 CPCI4052 CPCI405AB \ +- CPCI405DT CPCI440 CPCIISER4 CRAYL1 \ +- csb272 csb472 DASA_SIM DP405 \ +- DU405 ebony ERIC EXBITGEN \ +- G2000 HH405 HUB405 JSE \ +- KAREF luan METROBOX MIP405 \ +- MIP405T ML2 ml300 ocotea \ +- OCRTC ORSG p3p440 PCI405 \ +- pcs440ep PIP405 PLU405 PMC405 \ +- PPChameleonEVB sbc405 sequoia sequoia_nand \ +- VOH405 VOM405 W7OLMC W7OLMG \ +- walnut WUH405 XPEDITE1K yellowstone \ +- yosemite yucca bamboo \ ++ ADCIOP alpr AP1000 AR405 \ ++ ASH405 bamboo bubinga CANBT \ ++ CMS700 CPCI2DP CPCI405 CPCI4052 \ ++ CPCI405AB CPCI405DT CPCI440 CPCIISER4 \ ++ CRAYL1 csb272 csb472 DASA_SIM \ ++ DP405 DU405 ebony ERIC \ ++ EXBITGEN G2000 HH405 HUB405 \ ++ JSE KAREF luan METROBOX \ ++ MIP405 MIP405T ML2 ml300 \ ++ ocotea OCRTC ORSG p3p440 \ ++ PCI405 pcs440ep PIP405 PLU405 \ ++ PMC405 PPChameleonEVB sbc405 sequoia \ ++ sequoia_nand VOH405 VOM405 W7OLMC \ ++ W7OLMG walnut WUH405 XPEDITE1K \ ++ yellowstone yosemite yucca \ + " + + ######################################################################### +@@ -130,7 +130,7 @@ LIST_8260=" \ + ######################################################################### + + LIST_83xx=" \ +- TQM834x MPC8349EMDS \ ++ TQM834x MPC8349EMDS MPC8349ITX MPC8360EMDS \ + " + + +@@ -151,11 +151,12 @@ LIST_85xx=" \ + + LIST_74xx=" \ + DB64360 DB64460 EVB64260 P3G4 \ +- PCIPPC2 PCIPPC6 ZUMA \ ++ p3m7448 PCIPPC2 PCIPPC6 ZUMA \ + " + + LIST_7xx=" \ +- BAB7xx CPCI750 ELPPC ppmc7xx \ ++ BAB7xx CPCI750 ELPPC p3m750 \ ++ ppmc7xx \ + " + + LIST_ppc="${LIST_5xx} ${LIST_5xxx} \ +diff -Naupr u-boot-1.1.6/Makefile u-boot-1.1.6-fsl-1/Makefile +--- u-boot-1.1.6/Makefile 2006-11-02 08:15:01.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/Makefile 2006-12-06 10:33:48.000000000 -0600 +@@ -93,7 +93,7 @@ MKCONFIG := $(SRCTREE)/mkconfig + export MKCONFIG + + ifneq ($(OBJTREE),$(SRCTREE)) +-REMOTE_BUILD := 1 ++REMOTE_BUILD := 1 + export REMOTE_BUILD + endif + +@@ -174,9 +174,6 @@ endif + ifeq ($(CPU),ppc4xx) + OBJS += cpu/$(CPU)/resetvec.o + endif +-ifeq ($(CPU),mpc83xx) +-OBJS += cpu/$(CPU)/resetvec.o +-endif + ifeq ($(CPU),mpc85xx) + OBJS += cpu/$(CPU)/resetvec.o + endif +@@ -206,6 +203,9 @@ LIBS += dtt/libdtt.a + LIBS += drivers/libdrivers.a + LIBS += drivers/nand/libnand.a + LIBS += drivers/nand_legacy/libnand_legacy.a ++ifeq ($(CPU),mpc83xx) ++LIBS += drivers/qe/qe.a ++endif + LIBS += drivers/sk98lin/libsk98lin.a + LIBS += post/libpost.a post/cpu/libcpu.a + LIBS += common/libcommon.a +@@ -378,8 +378,8 @@ Lite5200_LOWBOOT08_config \ + icecube_5200_config \ + icecube_5200_LOWBOOT_config \ + icecube_5200_LOWBOOT08_config \ +-icecube_5200_DDR_config \ +-icecube_5200_DDR_LOWBOOT_config \ ++icecube_5200_DDR_config \ ++icecube_5200_DDR_LOWBOOT_config \ + icecube_5200_DDR_LOWBOOT08_config \ + icecube_5100_config: unconfig + @mkdir -p $(obj)include +@@ -412,7 +412,7 @@ icecube_5100_config: unconfig + @$(MKCONFIG) -a IceCube ppc mpc5xxx icecube + + v38b_config: unconfig +- @./mkconfig -a V38B ppc mpc5xxx v38b ++ @./mkconfig -a v38b ppc mpc5xxx v38b + + inka4x0_config: unconfig + @$(MKCONFIG) inka4x0 ppc mpc5xxx inka4x0 +@@ -458,7 +458,7 @@ prs200_highboot_DDR_config: unconfig + @[ -n "$(findstring _SDRAM,$@)" ] || \ + { if [ -n "$(findstring mcc200,$@)" ]; \ + then \ +- echo "... with DDR" ; \ ++ echo "... with DDR" ; \ + else \ + if [ -n "$(findstring _DDR,$@)" ];\ + then \ +@@ -865,9 +865,9 @@ RPXClassic_config: unconfig + RPXlite_config: unconfig + @$(MKCONFIG) $(@:_config=) ppc mpc8xx RPXlite + +-RPXlite_DW_64_config \ +-RPXlite_DW_LCD_config \ +-RPXlite_DW_64_LCD_config \ ++RPXlite_DW_64_config \ ++RPXlite_DW_LCD_config \ ++RPXlite_DW_64_LCD_config \ + RPXlite_DW_NVRAM_config \ + RPXlite_DW_NVRAM_64_config \ + RPXlite_DW_NVRAM_LCD_config \ +@@ -880,12 +880,12 @@ RPXlite_DW_config: unconfig + echo "... with 64MHz system clock ..."; \ + } + @[ -z "$(findstring _LCD,$@)" ] || \ +- { echo "#define CONFIG_LCD" >>$(obj)include/config.h ; \ ++ { echo "#define CONFIG_LCD" >>$(obj)include/config.h ; \ + echo "#define CONFIG_NEC_NL6448BC20" >>$(obj)include/config.h ; \ + echo "... with LCD display ..."; \ + } + @[ -z "$(findstring _NVRAM,$@)" ] || \ +- { echo "#define CFG_ENV_IS_IN_NVRAM" >>$(obj)include/config.h ; \ ++ { echo "#define CFG_ENV_IS_IN_NVRAM" >>$(obj)include/config.h ; \ + echo "... with ENV in NVRAM ..."; \ + } + @$(MKCONFIG) -a RPXlite_DW ppc mpc8xx RPXlite_dw +@@ -984,6 +984,9 @@ xtract_4xx = $(subst _25,,$(subst _33,,$ + ADCIOP_config: unconfig + @$(MKCONFIG) $(@:_config=) ppc ppc4xx adciop esd + ++alpr_config: unconfig ++ @./mkconfig $(@:_config=) ppc ppc4xx alpr prodrive ++ + AP1000_config:unconfig + @$(MKCONFIG) $(@:_config=) ppc ppc4xx ap1000 amirix + +@@ -1585,15 +1588,39 @@ r5200_config : unconfig + ## MPC83xx Systems + ######################################################################### + +-MPC8349ADS_config: unconfig +- @$(MKCONFIG) $(@:_config=) ppc mpc83xx mpc8349ads +- + TQM834x_config: unconfig + @$(MKCONFIG) $(@:_config=) ppc mpc83xx tqm834x + + MPC8349EMDS_config: unconfig + @$(MKCONFIG) $(@:_config=) ppc mpc83xx mpc8349emds + ++MPC8360EMDS_config \ ++MPC8360EMDS_HOST_33_config \ ++MPC8360EMDS_HOST_66_config \ ++MPC8360EMDS_SLAVE_config: unconfig ++ @echo "" >include/config.h ; \ ++ if [ "$(findstring _HOST_,$@)" ] ; then \ ++ echo -n "... PCI HOST " ; \ ++ echo "#define CONFIG_PCI" >>include/config.h ; \ ++ fi ; \ ++ if [ "$(findstring _SLAVE_,$@)" ] ; then \ ++ echo "...PCI SLAVE 66M" ; \ ++ echo "#define CONFIG_PCI" >>include/config.h ; \ ++ echo "#define CONFIG_PCISLAVE" >>include/config.h ; \ ++ fi ; \ ++ if [ "$(findstring _33_,$@)" ] ; then \ ++ echo -n "...33M ..." ; \ ++ echo "#define PCI_33M" >>include/config.h ; \ ++ fi ; \ ++ if [ "$(findstring _66_,$@)" ] ; then \ ++ echo -n "...66M..." ; \ ++ echo "#define PCI_66M" >>include/config.h ; \ ++ fi ; ++ @$(MKCONFIG) -a MPC8360EMDS ppc mpc83xx mpc8360emds ++ ++MPC8349ITX_config: unconfig ++ @$(MKCONFIG) $(@:_config=) ppc mpc83xx mpc8349itx ++ + ######################################################################### + ## MPC85xx Systems + ######################################################################### +@@ -1721,6 +1748,16 @@ EVB64260_750CX_config: unconfig + P3G4_config: unconfig + @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx evb64260 + ++p3m750_config \ ++p3m7448_config: unconfig ++ @mkdir -p $(obj)include ++ @if [ "$(findstring 750_,$@)" ] ; then \ ++ echo "#define CONFIG_P3M750" >>$(obj)include/config.h ; \ ++ else \ ++ echo "#define CONFIG_P3M7448" >>$(obj)include/config.h ; \ ++ fi ++ @$(MKCONFIG) -a p3mx ppc 74xx_7xx p3mx prodrive ++ + PCIPPC2_config \ + PCIPPC6_config: unconfig + @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx pcippc2 +@@ -1784,7 +1821,7 @@ ap966_config \ + ap922_config \ + ap922_XA10_config \ + ap7_config \ +-ap720t_config \ ++ap720t_config \ + ap920t_config \ + ap926ejs_config \ + ap946es_config: unconfig +@@ -1941,7 +1978,7 @@ cm4008_config : unconfig + cm41xx_config : unconfig + @$(MKCONFIG) $(@:_config=) arm arm920t cm41xx NULL ks8695 + +-gth2_config : unconfig ++gth2_config : unconfig + @mkdir -p $(obj)include + @ >$(obj)include/config.h + @echo "#define CONFIG_GTH2 1" >>$(obj)include/config.h +@@ -2087,19 +2124,19 @@ tb0229_config: unconfig + ######################################################################### + ## MIPS32 AU1X00 + ######################################################################### +-dbau1000_config : unconfig ++dbau1000_config : unconfig + @mkdir -p $(obj)include + @ >$(obj)include/config.h + @echo "#define CONFIG_DBAU1000 1" >>$(obj)include/config.h + @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00 + +-dbau1100_config : unconfig ++dbau1100_config : unconfig + @mkdir -p $(obj)include + @ >$(obj)include/config.h + @echo "#define CONFIG_DBAU1100 1" >>$(obj)include/config.h + @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00 + +-dbau1500_config : unconfig ++dbau1500_config : unconfig + @mkdir -p $(obj)include + @ >$(obj)include/config.h + @echo "#define CONFIG_DBAU1500 1" >>$(obj)include/config.h +@@ -2117,7 +2154,7 @@ dbau1550_el_config : unconfig + @echo "#define CONFIG_DBAU1550 1" >>$(obj)include/config.h + @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00 + +-pb1000_config : unconfig ++pb1000_config : unconfig + @mkdir -p $(obj)include + @ >$(obj)include/config.h + @echo "#define CONFIG_PB1000 1" >>$(obj)include/config.h +diff -Naupr u-boot-1.1.6/net/eth.c u-boot-1.1.6-fsl-1/net/eth.c +--- u-boot-1.1.6/net/eth.c 2006-11-02 08:15:01.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/net/eth.c 2006-12-06 10:33:49.000000000 -0600 +@@ -54,6 +54,7 @@ extern int scc_initialize(bd_t*); + extern int skge_initialize(bd_t*); + extern int tsec_initialize(bd_t*, int, char *); + extern int npe_initialize(bd_t *); ++extern int uec_initialize(int); + + static struct eth_device *eth_devices, *eth_current; + +@@ -142,13 +143,10 @@ int eth_initialize(bd_t *bis) + miiphy_init(); + #endif + +-#ifdef CONFIG_DB64360 ++#if defined(CONFIG_DB64360) || defined(CONFIG_CPCI750) + mv6436x_eth_initialize(bis); + #endif +-#ifdef CONFIG_CPCI750 +- mv6436x_eth_initialize(bis); +-#endif +-#ifdef CONFIG_DB64460 ++#if defined(CONFIG_DB64460) || defined(CONFIG_P3Mx) + mv6446x_eth_initialize(bis); + #endif + #if defined(CONFIG_4xx) && !defined(CONFIG_IOP480) && !defined(CONFIG_AP1000) +@@ -196,6 +194,12 @@ int eth_initialize(bd_t *bis) + tsec_initialize(bis, 3, CONFIG_MPC83XX_TSEC4_NAME); + # endif + #endif ++#if defined(CONFIG_UEC_ETH1) ++ uec_initialize(0); ++#endif ++#if defined(CONFIG_UEC_ETH2) ++ uec_initialize(1); ++#endif + #if defined(CONFIG_MPC86XX_TSEC1) + tsec_initialize(bis, 0, CONFIG_MPC86XX_TSEC1_NAME); + #endif +diff -Naupr u-boot-1.1.6/README u-boot-1.1.6-fsl-1/README +--- u-boot-1.1.6/README 2006-11-02 08:15:01.000000000 -0600 ++++ u-boot-1.1.6-fsl-1/README 2006-11-30 12:34:13.000000000 -0600 +@@ -1207,7 +1207,12 @@ The following options need to be configu + clock chips. See common/cmd_i2c.c for a description of the + command line interface. + +- CONFIG_HARD_I2C selects the CPM hardware driver for I2C. ++ CONFIG_I2C_CMD_TREE is a recommended option that places ++ all I2C commands under a single 'i2c' root command. The ++ older 'imm', 'imd', 'iprobe' etc. commands are considered ++ deprecated and may disappear in the future. ++ ++ CONFIG_HARD_I2C selects a hardware I2C controller. + + CONFIG_SOFT_I2C configures u-boot to use a software (aka + bit-banging) driver instead of CPM or similar hardware +@@ -1312,6 +1317,42 @@ The following options need to be configu + in u-boot bd_info structure based on u-boot environment + variable "i2cfast". (see also i2cfast) + ++ CONFIG_I2C_MULTI_BUS ++ ++ This option allows the use of multiple I2C buses, each of which ++ must have a controller. At any point in time, only one bus is ++ active. To switch to a different bus, use the 'i2c dev' command. ++ Note that bus numbering is zero-based. ++ ++ CFG_I2C_NOPROBES ++ ++ This option specifies a list of I2C devices that will be skipped ++ when the 'i2c probe' command is issued (or 'iprobe' using the legacy ++ command). If CONFIG_I2C_MULTI_BUS is set, specify a list of bus-device ++ pairs. Otherwise, specify a 1D array of device addresses ++ ++ e.g. ++ #undef CONFIG_I2C_MULTI_BUS ++ #define CFG_I2C_NOPROBES {0x50,0x68} ++ ++ will skip addresses 0x50 and 0x68 on a board with one I2C bus ++ ++ #define CONFIG_I2C_MULTI_BUS ++ #define CFG_I2C_MULTI_NOPROBES {{0,0x50},{0,0x68},{1,0x54}} ++ ++ will skip addresses 0x50 and 0x68 on bus 0 and address 0x54 on bus 1 ++ ++ CFG_SPD_BUS_NUM ++ ++ If defined, then this indicates the I2C bus number for DDR SPD. ++ If not defined, then U-Boot assumes that SPD is on I2C bus 0. ++ ++ CONFIG_FSL_I2C ++ ++ Define this option if you want to use Freescale's I2C driver in ++ drivers/fsl_i2c.c. ++ ++ + - SPI Support: CONFIG_SPI + + Enables SPI driver (so far only tested with +@@ -1470,8 +1511,8 @@ The following options need to be configu + + Enable auto completion of commands using TAB. + +- Note that this feature has NOT been implemented yet +- for the "hush" shell. ++ Note that this feature has NOT been implemented yet ++ for the "hush" shell. + + + CFG_HUSH_PARSER +@@ -2209,6 +2250,24 @@ Low Level (hardware related) configurati + CFG_POCMR2_MASK_ATTRIB: (MPC826x only) + Overrides the default PCI memory map in cpu/mpc8260/pci.c if set. + ++- CONFIG_SPD_EEPROM ++ Get DDR timing information from an I2C EEPROM. Common with pluggable ++ memory modules such as SODIMMs ++ SPD_EEPROM_ADDRESS ++ I2C address of the SPD EEPROM ++ ++- CFG_SPD_BUS_NUM ++ If SPD EEPROM is on an I2C bus other than the first one, specify here. ++ Note that the value must resolve to something your driver can deal with. ++ ++- CFG_83XX_DDR_USES_CS0 ++ Only for 83xx systems. If specified, then DDR should be configured ++ using CS0 and CS1 instead of CS2 and CS3. ++ ++- CFG_83XX_DDR_USES_CS0 ++ Only for 83xx systems. If specified, then DDR should be configured ++ using CS0 and CS1 instead of CS2 and CS3. ++ + - CONFIG_ETHER_ON_FEC[12] + Define to enable FEC[12] on a 8xx series processor. + +@@ -3114,11 +3173,11 @@ loadaddr=200000 + oftaddr=0x300000 + => bootm $loadaddr - $oftaddr + ## Booting image at 00200000 ... +- Image Name: Linux-2.6.17-dirty +- Image Type: PowerPC Linux Kernel Image (gzip compressed) +- Data Size: 1029343 Bytes = 1005.2 kB ++ Image Name: Linux-2.6.17-dirty ++ Image Type: PowerPC Linux Kernel Image (gzip compressed) ++ Data Size: 1029343 Bytes = 1005.2 kB + Load Address: 00000000 +- Entry Point: 00000000 ++ Entry Point: 00000000 + Verifying Checksum ... OK + Uncompressing Kernel Image ... OK + Booting using flat device tree at 0x300000 diff --git a/packages/uboot/u-boot-1.1.6/u-boot-1.1.6-fsl-1-streamline-the-83xx-immr-head-file.patch b/packages/uboot/u-boot-1.1.6/u-boot-1.1.6-fsl-1-streamline-the-83xx-immr-head-file.patch new file mode 100644 index 0000000000..30981dc43c --- /dev/null +++ b/packages/uboot/u-boot-1.1.6/u-boot-1.1.6-fsl-1-streamline-the-83xx-immr-head-file.patch @@ -0,0 +1,3640 @@ +ce4d6db21531bc35da7180436c6f49efac7c0461 +diff --git a/board/tqm834x/tqm834x.c b/board/tqm834x/tqm834x.c +index 36d901f..9c35e22 100644 +--- a/board/tqm834x/tqm834x.c ++++ b/board/tqm834x/tqm834x.c +@@ -148,14 +148,14 @@ int checkboard (void) + u32 w, f; + + immr = (immap_t *)CFG_IMMR; +- if (!(immr->reset.rcwh & RCWH_PCIHOST)) { ++ if (!(immr->reset.rcwh & HRCWH_PCI_HOST)) { + printf("PCI: NOT in host mode..?!\n"); + return 0; + } + + /* get bus width */ + w = 32; +- if (immr->reset.rcwh & RCWH_PCI64) ++ if (immr->reset.rcwh & HRCWH_64_BIT_PCI) + w = 64; + + /* get clock */ +diff --git a/cpu/mpc83xx/cpu_init.c b/cpu/mpc83xx/cpu_init.c +index e5725fb..7574fab 100644 +--- a/cpu/mpc83xx/cpu_init.c ++++ b/cpu/mpc83xx/cpu_init.c +@@ -202,12 +202,12 @@ void cpu_init_f (volatile immap_t * im) + im->sysconf.lblaw[7].ar = CFG_LBLAWAR7_PRELIM; + #endif + #ifdef CFG_GPIO1_PRELIM +- im->pgio[0].dir = CFG_GPIO1_DIR; +- im->pgio[0].dat = CFG_GPIO1_DAT; ++ im->gpio[0].dir = CFG_GPIO1_DIR; ++ im->gpio[0].dat = CFG_GPIO1_DAT; + #endif + #ifdef CFG_GPIO2_PRELIM +- im->pgio[1].dir = CFG_GPIO2_DIR; +- im->pgio[1].dat = CFG_GPIO2_DAT; ++ im->gpio[1].dir = CFG_GPIO2_DIR; ++ im->gpio[1].dat = CFG_GPIO2_DAT; + #endif + } + +diff --git a/cpu/mpc83xx/qe_io.c b/cpu/mpc83xx/qe_io.c +index ebe3487..8b3937a 100644 +--- a/cpu/mpc83xx/qe_io.c ++++ b/cpu/mpc83xx/qe_io.c +@@ -35,7 +35,7 @@ void qe_config_iopin(u8 port, u8 pin, int dir, int open_drain, int assign) + u32 pin_1bit_mask; + u32 tmp_val; + volatile immap_t *im = (volatile immap_t *)CFG_IMMR; +- volatile gpio83xx_t *par_io =(volatile gpio83xx_t *)&im->gpio; ++ volatile qepio83xx_t *par_io = (volatile qepio83xx_t *)&im->qepio; + + /* Caculate pin location and 2bit mask and dir */ + pin_2bit_mask = (u32)(0x3 << (NUM_OF_PINS-(pin%(NUM_OF_PINS/2)+1)*2)); +diff --git a/cpu/mpc83xx/speed.c b/cpu/mpc83xx/speed.c +index 7e53b1e..40ba6b0 100644 +--- a/cpu/mpc83xx/speed.c ++++ b/cpu/mpc83xx/speed.c +@@ -139,7 +139,7 @@ int get_clocks(void) + #endif + } + +- spmf = ((im->reset.rcwl & RCWL_SPMF) >> RCWL_SPMF_SHIFT); ++ spmf = ((im->reset.rcwl & HRCWL_SPMF) >> HRCWL_SPMF_SHIFT); + csb_clk = pci_sync_in * (1 + clkin_div) * spmf; + + sccr = im->clk.sccr; +@@ -251,7 +251,7 @@ int get_clocks(void) + } + #if defined(CONFIG_MPC8349) || defined(CONFIG_MPC8360) + lbiu_clk = csb_clk * +- (1 + ((im->reset.rcwl & RCWL_LBIUCM) >> RCWL_LBIUCM_SHIFT)); ++ (1 + ((im->reset.rcwl & HRCWL_LBIUCM) >> HRCWL_LBIUCM_SHIFT)); + #else + #error Unknown MPC83xx chip + #endif +@@ -268,11 +268,11 @@ int get_clocks(void) + } + #if defined(CONFIG_MPC8349) || defined(CONFIG_MPC8360) + ddr_clk = csb_clk * +- (1 + ((im->reset.rcwl & RCWL_DDRCM) >> RCWL_DDRCM_SHIFT)); +- corepll = (im->reset.rcwl & RCWL_COREPLL) >> RCWL_COREPLL_SHIFT; ++ (1 + ((im->reset.rcwl & HRCWL_DDRCM) >> HRCWL_DDRCM_SHIFT)); ++ corepll = (im->reset.rcwl & HRCWL_COREPLL) >> HRCWL_COREPLL_SHIFT; + #if defined (CONFIG_MPC8360) + ddr_sec_clk = csb_clk * (1 + +- ((im->reset.rcwl & RCWL_LBIUCM) >> RCWL_LBIUCM_SHIFT)); ++ ((im->reset.rcwl & HRCWL_LBIUCM) >> HRCWL_LBIUCM_SHIFT)); + #endif + #else + #error Unknown MPC83xx chip +@@ -307,8 +307,8 @@ int get_clocks(void) + } + + #if defined (CONFIG_MPC8360) +- qepmf = (im->reset.rcwl & RCWL_CEPMF) >> RCWL_CEPMF_SHIFT; +- qepdf = (im->reset.rcwl & RCWL_CEPDF) >> RCWL_CEPDF_SHIFT; ++ qepmf = (im->reset.rcwl & HRCWL_CEPMF) >> HRCWL_CEPMF_SHIFT; ++ qepdf = (im->reset.rcwl & HRCWL_CEPDF) >> HRCWL_CEPDF_SHIFT; + qe_clk = (pci_sync_in * qepmf) / (1 + qepdf); + brg_clk = qe_clk / 2; + #endif +diff --git a/include/asm-ppc/immap_83xx.h b/include/asm-ppc/immap_83xx.h +index 43cde5e..67b035c 100644 +--- a/include/asm-ppc/immap_83xx.h ++++ b/include/asm-ppc/immap_83xx.h +@@ -3,20 +3,11 @@ + * + * MPC83xx Internal Memory Map + * +- * History : +- * 20060601: Daveliu (daveliu@freescale.com) +- * TanyaJiang (tanya.jiang@freescale.com) +- * Unified variable names for mpc83xx +- * 2005 : Mandy Lavi (mandy.lavi@freescale.com) +- * support for mpc8360e +- * 2004 : Eran Liberty (liberty@freescale.com) +- * Initialized for mpc8349 +- * based on: +- * MPC8260 Internal Memory Map +- * Copyright (c) 1999 Dan Malek (dmalek@jlc.net) +- * MPC85xx Internal Memory Map +- * Copyright(c) 2002,2003 Motorola Inc. +- * Xianghua Xiao (x.xiao@motorola.com) ++ * Contributors: ++ * Dave Liu <daveliu@freescale.com> ++ * Tanya Jiang <tanya.jiang@freescale.com> ++ * Mandy Lavi <mandy.lavi@freescale.com> ++ * Eran Liberty <liberty@freescale.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as +@@ -25,7 +16,7 @@ + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of +- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License +@@ -37,36 +28,24 @@ + #ifndef __IMMAP_83xx__ + #define __IMMAP_83xx__ + +-#include <config.h> + #include <asm/types.h> + #include <asm/fsl_i2c.h> + + /* +- * Local Access Window. ++ * Local Access Window + */ + typedef struct law83xx { + u32 bar; /* LBIU local access window base address register */ +-/* Identifies the 20 most-significant address bits of the base of local +- * access window n. The specified base address should be aligned to the +- * window size, as defined by LBLAWARn[SIZE]. +- */ +-#define LAWBAR_BAR 0xFFFFF000 +-#define LAWBAR_RES ~(LAWBAR_BAR) + u32 ar; /* LBIU local access window attribute register */ + } law83xx_t; + + /* +- * System configuration registers. ++ * System configuration registers + */ + typedef struct sysconf83xx { + u32 immrbar; /* Internal memory map base address register */ + u8 res0[0x04]; + u32 altcbar; /* Alternate configuration base address register */ +-/* Identifies the12 most significant address bits of an alternate base +- * address used for boot sequencer configuration accesses. +- */ +-#define ALTCBAR_BASE_ADDR 0xFFF00000 +-#define ALTCBAR_RES ~(ALTCBAR_BASE_ADDR) /* Reserved. Write has no effect, read returns 0. */ + u8 res1[0x14]; + law83xx_t lblaw[4]; /* LBIU local access window */ + u8 res2[0x20]; +@@ -77,115 +56,10 @@ typedef struct sysconf83xx { + u32 sgprl; /* System General Purpose Register Low */ + u32 sgprh; /* System General Purpose Register High */ + u32 spridr; /* System Part and Revision ID Register */ +-#define SPRIDR_PARTID 0xFFFF0000 /* Part Identification. */ +-#define SPRIDR_REVID 0x0000FFFF /* Revision Identification. */ + u8 res5[0x04]; + u32 spcr; /* System Priority Configuration Register */ +-#define SPCR_PCIHPE 0x10000000 /* PCI Highest Priority Enable. */ +-#define SPCR_PCIHPE_SHIFT (31-3) +-#define SPCR_PCIPR 0x03000000 /* PCI bridge system bus request priority. */ +-#define SPCR_PCIPR_SHIFT (31-7) +-#define SPCR_OPT 0x00800000 /* Optimize */ +-#define SPCR_TBEN 0x00400000 /* E300 PowerPC core time base unit enable. */ +-#define SPCR_TBEN_SHIFT (31-9) +-#define SPCR_COREPR 0x00300000 /* E300 PowerPC Core system bus request priority. */ +-#define SPCR_COREPR_SHIFT (31-11) +-#if defined (CONFIG_MPC8349) +-#define SPCR_TSEC1DP 0x00003000 /* TSEC1 data priority. */ +-#define SPCR_TSEC1DP_SHIFT (31-19) +-#define SPCR_TSEC1BDP 0x00000C00 /* TSEC1 buffer descriptor priority. */ +-#define SPCR_TSEC1BDP_SHIFT (31-21) +-#define SPCR_TSEC1EP 0x00000300 /* TSEC1 emergency priority. */ +-#define SPCR_TSEC1EP_SHIFT (31-23) +-#define SPCR_TSEC2DP 0x00000030 /* TSEC2 data priority. */ +-#define SPCR_TSEC2DP_SHIFT (31-27) +-#define SPCR_TSEC2BDP 0x0000000C /* TSEC2 buffer descriptor priority. */ +-#define SPCR_TSEC2BDP_SHIFT (31-29) +-#define SPCR_TSEC2EP 0x00000003 /* TSEC2 emergency priority. */ +-#define SPCR_TSEC2EP_SHIFT (31-31) +-#define SPCR_RES ~(SPCR_PCIHPE | SPCR_PCIPR | SPCR_TBEN | SPCR_COREPR \ +- | SPCR_TSEC1DP | SPCR_TSEC1BDP | SPCR_TSEC1EP \ +- | SPCR_TSEC2DP | SPCR_TSEC2BDP | SPCR_TSEC2EP) +-#elif defined (CONFIG_MPC8360) +-#define SPCR_RES ~(SPCR_PCIHPE|SPCR_PCIPR|SPCR_OPT|SPCR_TBEN|SPCR_COREPR) +-#endif +- u32 sicrl; /* System General Purpose Register Low */ +-#if defined (CONFIG_MPC8349) +-#define SICRL_LDP_A 0x80000000 +-#define SICRL_USB1 0x40000000 +-#define SICRL_USB0 0x20000000 +-#define SICRL_UART 0x0C000000 +-#define SICRL_GPIO1_A 0x02000000 +-#define SICRL_GPIO1_B 0x01000000 +-#define SICRL_GPIO1_C 0x00800000 +-#define SICRL_GPIO1_D 0x00400000 +-#define SICRL_GPIO1_E 0x00200000 +-#define SICRL_GPIO1_F 0x00180000 +-#define SICRL_GPIO1_G 0x00040000 +-#define SICRL_GPIO1_H 0x00020000 +-#define SICRL_GPIO1_I 0x00010000 +-#define SICRL_GPIO1_J 0x00008000 +-#define SICRL_GPIO1_K 0x00004000 +-#define SICRL_GPIO1_L 0x00003000 +-#define SICRL_RES ~(SICRL_LDP_A | SICRL_USB0 | SICRL_USB1 | SICRL_UART \ +- | SICRL_GPIO1_A | SICRL_GPIO1_B | SICRL_GPIO1_C \ +- | SICRL_GPIO1_D | SICRL_GPIO1_E | SICRL_GPIO1_F \ +- | SICRL_GPIO1_G | SICRL_GPIO1_H | SICRL_GPIO1_I \ +- | SICRL_GPIO1_J | SICRL_GPIO1_K | SICRL_GPIO1_L ) +-#elif defined (CONFIG_MPC8360) +-#define SICRL_LDP_A 0xC0000000 +-#define SICRL_LCLK_1 0x10000000 +-#define SICRL_LCLK_2 0x08000000 +-#define SICRL_SRCID_A 0x03000000 +-#define SICRL_IRQ_CKSTP_A 0x00C00000 +-#define SICRL_RES ~(SICRL_LDP_A | SICRL_LCLK_1 | SICRL_LCLK_2 | \ +- SICRL_SRCID_A | SICRL_IRQ_CKSTP_A) +-#endif +- u32 sicrh; /* System General Purpose Register High */ +-#define SICRH_DDR 0x80000000 +-#if defined (CONFIG_MPC8349) +-#define SICRH_TSEC1_A 0x10000000 +-#define SICRH_TSEC1_B 0x08000000 +-#define SICRH_TSEC1_C 0x04000000 +-#define SICRH_TSEC1_D 0x02000000 +-#define SICRH_TSEC1_E 0x01000000 +-#define SICRH_TSEC1_F 0x00800000 +-#define SICRH_TSEC2_A 0x00400000 +-#define SICRH_TSEC2_B 0x00200000 +-#define SICRH_TSEC2_C 0x00100000 +-#define SICRH_TSEC2_D 0x00080000 +-#define SICRH_TSEC2_E 0x00040000 +-#define SICRH_TSEC2_F 0x00020000 +-#define SICRH_TSEC2_G 0x00010000 +-#define SICRH_TSEC2_H 0x00008000 +-#define SICRH_GPIO2_A 0x00004000 +-#define SICRH_GPIO2_B 0x00002000 +-#define SICRH_GPIO2_C 0x00001000 +-#define SICRH_GPIO2_D 0x00000800 +-#define SICRH_GPIO2_E 0x00000400 +-#define SICRH_GPIO2_F 0x00000200 +-#define SICRH_GPIO2_G 0x00000180 +-#define SICRH_GPIO2_H 0x00000060 +-#define SICRH_TSOBI1 0x00000002 +-#define SICRH_TSOBI2 0x00000001 +-#define SICRH_RES ~( SICRH_DDR | SICRH_TSEC1_A | SICRH_TSEC1_B \ +- | SICRH_TSEC1_C | SICRH_TSEC1_D | SICRH_TSEC1_E \ +- | SICRH_TSEC1_F | SICRH_TSEC2_A | SICRH_TSEC2_B \ +- | SICRH_TSEC2_C | SICRH_TSEC2_D | SICRH_TSEC2_E \ +- | SICRH_TSEC2_F | SICRH_TSEC2_G | SICRH_TSEC2_H \ +- | SICRH_GPIO2_A | SICRH_GPIO2_B | SICRH_GPIO2_C \ +- | SICRH_GPIO2_D | SICRH_GPIO2_E | SICRH_GPIO2_F \ +- | SICRH_GPIO2_G | SICRH_GPIO2_H | SICRH_TSOBI1 \ +- | SICRH_TSOBI2) +-#elif defined (CONFIG_MPC8360) +-#define SICRH_SECONDARY_DDR 0x40000000 +-#define SICRH_SDDROE 0x02000000 /* SDDRIOE bit from reset configuration word high. */ +-#define SICRH_UC1EOBI 0x00000004 /* UCC1 Ethernet Output Buffer Impedance. */ +-#define SICRH_UC2E1OBI 0x00000002 /* UCC2 Ethernet pin option 1 Output Buffer Impedance. */ +-#define SICRH_UC2E2OBI 0x00000001 /* UCC2 Ethernet pin option 2 Output Buffer Impedance. */ +-#define SICRH_RES ~(SICRH_DDR | SICRH_SECONDARY_DDR | SICRH_SDDROE | \ +- SICRH_UC2E1OBI | SICRH_UC2E2OBI | SICRH_UC2E2OBI) +-#endif ++ u32 sicrl; /* System I/O Configuration Register Low */ ++ u32 sicrh; /* System I/O Configuration Register High */ + u8 res6[0xE4]; + } sysconf83xx_t; + +@@ -196,11 +70,8 @@ typedef struct wdt83xx { + u8 res0[4]; + u32 swcrr; /* System watchdog control register */ + u32 swcnr; /* System watchdog count register */ +-#define SWCNR_SWCN 0x0000FFFF Software Watchdog Count Field. +-#define SWCNR_RES ~(SWCNR_SWCN) + u8 res1[2]; + u16 swsrr; /* System watchdog service register */ +-#define SWSRR_WS 0x0000FFFF /* Software Watchdog Service Field. */ + u8 res2[0xF0]; + } wdt83xx_t; + +@@ -209,91 +80,46 @@ typedef struct wdt83xx { + */ + typedef struct rtclk83xx { + u32 cnr; /* control register */ +-#define CNR_CLEN 0x00000080 /* Clock Enable Control Bit */ +-#define CNR_CLIN 0x00000040 /* Input Clock Control Bit */ +-#define CNR_AIM 0x00000002 /* Alarm Interrupt Mask Bit */ +-#define CNR_SIM 0x00000001 /* Second Interrupt Mask Bit */ +-#define CNR_RES ~(CNR_CLEN | CNR_CLIN | CNR_AIM | CNR_SIM) + u32 ldr; /* load register */ +-#define LDR_CLDV 0xFFFFFFFF /* Contains the 32-bit value to be +- * loaded in a 32-bit RTC counter.*/ + u32 psr; /* prescale register */ +-#define PSR_PRSC 0xFFFFFFFF /* RTC Prescaler bits. */ +- u32 ctr; /* Counter value field register */ +-#define CRT_CNTV 0xFFFFFFFF /* RTC Counter value field. */ ++ u32 ctr; /* counter value field register */ + u32 evr; /* event register */ +-#define RTEVR_SIF 0x00000001 /* Second Interrupt Flag Bit */ +-#define RTEVR_AIF 0x00000002 /* Alarm Interrupt Flag Bit */ +-#define RTEVR_RES ~(RTEVR_SIF | RTEVR_AIF) +-#define PTEVR_PIF 0x00000001 /* Periodic interrupt flag bit. */ +-#define PTEVR_RES ~(PTEVR_PIF) + u32 alr; /* alarm register */ + u8 res0[0xE8]; + } rtclk83xx_t; + + /* +- * Global timper module ++ * Global timer module + */ +- + typedef struct gtm83xx { +- u8 cfr1; /* Timer1/2 Configuration */ +-#define CFR1_PCAS 0x80 /* Pair Cascade mode */ +-#define CFR1_BCM 0x40 /* Backward compatible mode */ +-#define CFR1_STP2 0x20 /* Stop timer */ +-#define CFR1_RST2 0x10 /* Reset timer */ +-#define CFR1_GM2 0x08 /* Gate mode for pin 2 */ +-#define CFR1_GM1 0x04 /* Gate mode for pin 1 */ +-#define CFR1_STP1 0x02 /* Stop timer */ +-#define CFR1_RST1 0x01 /* Reset timer */ +-#define CFR1_RES ~(CFR1_PCAS | CFR1_STP2 | CFR1_RST2 | CFR1_GM2 |\ +- CFR1_GM1 | CFR1_STP1 | CFR1_RST1) ++ u8 cfr1; /* Timer1/2 Configuration */ + u8 res0[3]; +- u8 cfr2; /* Timer3/4 Configuration */ +-#define CFR2_PCAS 0x80 /* Pair Cascade mode */ +-#define CFR2_SCAS 0x40 /* Super Cascade mode */ +-#define CFR2_STP4 0x20 /* Stop timer */ +-#define CFR2_RST4 0x10 /* Reset timer */ +-#define CFR2_GM4 0x08 /* Gate mode for pin 4 */ +-#define CFR2_GM3 0x04 /* Gate mode for pin 3 */ +-#define CFR2_STP3 0x02 /* Stop timer */ +-#define CFR2_RST3 0x01 /* Reset timer */ ++ u8 cfr2; /* Timer3/4 Configuration */ + u8 res1[10]; +- u16 mdr1; /* Timer1 Mode Register */ +-#define MDR_SPS 0xff00 /* Secondary Prescaler value */ +-#define MDR_CE 0x00c0 /* Capture edge and enable interrupt */ +-#define MDR_OM 0x0020 /* Output mode */ +-#define MDR_ORI 0x0010 /* Output reference interrupt enable */ +-#define MDR_FRR 0x0008 /* Free run/restart */ +-#define MDR_ICLK 0x0006 /* Input clock source for the timer */ +-#define MDR_GE 0x0001 /* Gate enable */ +- u16 mdr2; /* Timer2 Mode Register */ +- u16 rfr1; /* Timer1 Reference Register */ +- u16 rfr2; /* Timer2 Reference Register */ +- u16 cpr1; /* Timer1 Capture Register */ +- u16 cpr2; /* Timer2 Capture Register */ +- u16 cnr1; /* Timer1 Counter Register */ +- u16 cnr2; /* Timer2 Counter Register */ +- u16 mdr3; /* Timer3 Mode Register */ +- u16 mdr4; /* Timer4 Mode Register */ +- u16 rfr3; /* Timer3 Reference Register */ +- u16 rfr4; /* Timer4 Reference Register */ +- u16 cpr3; /* Timer3 Capture Register */ +- u16 cpr4; /* Timer4 Capture Register */ +- u16 cnr3; /* Timer3 Counter Register */ +- u16 cnr4; /* Timer4 Counter Register */ +- u16 evr1; /* Timer1 Event Register */ +- u16 evr2; /* Timer2 Event Register */ +- u16 evr3; /* Timer3 Event Register */ +- u16 evr4; /* Timer4 Event Register */ +-#define GTEVR_REF 0x0002 /* Output reference event */ +-#define GTEVR_CAP 0x0001 /* Counter Capture event */ +-#define GTEVR_RES ~(EVR_CAP|EVR_REF) +- u16 psr1; /* Timer1 Prescaler Register */ +- u16 psr2; /* Timer2 Prescaler Register */ +- u16 psr3; /* Timer3 Prescaler Register */ +- u16 psr4; /* Timer4 Prescaler Register */ +-#define GTPSR_PPS 0x00FF /* Primary Prescaler Bits. */ +-#define GTPSR_RES ~(GTPSR_PPS) ++ u16 mdr1; /* Timer1 Mode Register */ ++ u16 mdr2; /* Timer2 Mode Register */ ++ u16 rfr1; /* Timer1 Reference Register */ ++ u16 rfr2; /* Timer2 Reference Register */ ++ u16 cpr1; /* Timer1 Capture Register */ ++ u16 cpr2; /* Timer2 Capture Register */ ++ u16 cnr1; /* Timer1 Counter Register */ ++ u16 cnr2; /* Timer2 Counter Register */ ++ u16 mdr3; /* Timer3 Mode Register */ ++ u16 mdr4; /* Timer4 Mode Register */ ++ u16 rfr3; /* Timer3 Reference Register */ ++ u16 rfr4; /* Timer4 Reference Register */ ++ u16 cpr3; /* Timer3 Capture Register */ ++ u16 cpr4; /* Timer4 Capture Register */ ++ u16 cnr3; /* Timer3 Counter Register */ ++ u16 cnr4; /* Timer4 Counter Register */ ++ u16 evr1; /* Timer1 Event Register */ ++ u16 evr2; /* Timer2 Event Register */ ++ u16 evr3; /* Timer3 Event Register */ ++ u16 evr4; /* Timer4 Event Register */ ++ u16 psr1; /* Timer1 Prescaler Register */ ++ u16 psr2; /* Timer2 Prescaler Register */ ++ u16 psr3; /* Timer3 Prescaler Register */ ++ u16 psr4; /* Timer4 Prescaler Register */ + u8 res[0xC0]; + } gtm83xx_t; + +@@ -301,188 +127,31 @@ typedef struct gtm83xx { + * Integrated Programmable Interrupt Controller + */ + typedef struct ipic83xx { +- u32 sicfr; /* System Global Interrupt Configuration Register (SICFR) */ +-#define SICFR_HPI 0x7f000000 /* Highest Priority Interrupt */ +-#define SICFR_MPSB 0x00400000 /* Mixed interrupts Priority Scheme for group B */ +-#define SICFR_MPSA 0x00200000 /* Mixed interrupts Priority Scheme for group A */ +-#define SICFR_IPSD 0x00080000 /* Internal interrupts Priority Scheme for group D */ +-#define SICFR_IPSA 0x00010000 /* Internal interrupts Priority Scheme for group A */ +-#define SICFR_HPIT 0x00000300 /* HPI priority position IPIC output interrupt Type */ +-#define SICFR_RES ~(SICFR_HPI|SICFR_MPSB|SICFR_MPSA|SICFR_IPSD|SICFR_IPSA|SICFR_HPIT) +- u32 sivcr; /* System Global Interrupt Vector Register (SIVCR) */ +-#define SICVR_IVECX 0xfc000000 /* Interrupt vector (for CE compatibility purpose only not used in 8349 IPIC implementation) */ +-#define SICVR_IVEC 0x0000007f /* Interrupt vector */ +-#define SICVR_RES ~(SICVR_IVECX|SICVR_IVEC) +- u32 sipnr_h; /* System Internal Interrupt Pending Register - High (SIPNR_H) */ +-#if defined (CONFIG_MPC8349) +-#define SIIH_TSEC1TX 0x80000000 /* TSEC1 Tx interrupt */ +-#define SIIH_TSEC1RX 0x40000000 /* TSEC1 Rx interrupt */ +-#define SIIH_TSEC1ER 0x20000000 /* TSEC1 Eror interrupt */ +-#define SIIH_TSEC2TX 0x10000000 /* TSEC2 Tx interrupt */ +-#define SIIH_TSEC2RX 0x08000000 /* TSEC2 Rx interrupt */ +-#define SIIH_TSEC2ER 0x04000000 /* TSEC2 Eror interrupt */ +-#define SIIH_USB2DR 0x02000000 /* USB2 DR interrupt */ +-#define SIIH_USB2MPH 0x01000000 /* USB2 MPH interrupt */ +-#endif +-#if defined (CONFIG_MPC8360) +-#define SIIH_H_QE_H 0x80000000 /* QE high interrupt */ +-#define SIIH_H_QE_L 0x40000000 /* QE low interrupt */ +-#endif +-#define SIIH_UART1 0x00000080 /* UART1 interrupt */ +-#define SIIH_UART2 0x00000040 /* UART2 interrupt */ +-#define SIIH_SEC 0x00000020 /* SEC interrupt */ +-#define SIIH_I2C1 0x00000004 /* I2C1 interrupt */ +-#define SIIH_I2C2 0x00000002 /* I2C2 interrupt */ +-#if defined (CONFIG_MPC8349) +-#define SIIH_SPI 0x00000001 /* SPI interrupt */ +-#define SIIH_RES ~(SIIH_TSEC1TX | SIIH_TSEC1RX | SIIH_TSEC1ER \ +- | SIIH_TSEC2TX | SIIH_TSEC2RX | SIIH_TSEC2ER \ +- | SIIH_USB2DR | SIIH_USB2MPH | SIIH_UART1 \ +- | SIIH_UART2 | SIIH_SEC | SIIH_I2C1 \ +- | SIIH_I2C2 | SIIH_SPI) +-#endif +-#if defined (CONFIG_MPC8360) +-#define SIIH_RES ~(SIIH_H_QE_H | SIIH_H_QE_L | SIIH_H_UART1 | \ +- SIIH_H_UART2| SIIH_H_SEC | SIIH_H_I2C1 |SIIH_H_I2C2) +-#endif +- u32 sipnr_l; /* System Internal Interrupt Pending Register - Low (SIPNR_L) */ +-#define SIIL_RTCS 0x80000000 /* RTC SECOND interrupt */ +-#define SIIL_PIT 0x40000000 /* PIT interrupt */ +-#define SIIL_PCI1 0x20000000 /* PCI1 interrupt */ +-#if defined (CONFIG_MPC8349) +-#define SIIL_PCI2 0x10000000 /* PCI2 interrupt */ +-#endif +-#define SIIL_RTCA 0x08000000 /* RTC ALARM interrupt */ +-#define SIIL_MU 0x04000000 /* Message Unit interrupt */ +-#define SIIL_SBA 0x02000000 /* System Bus Arbiter interrupt */ +-#define SIIL_DMA 0x01000000 /* DMA interrupt */ +-#define SIIL_GTM4 0x00800000 /* GTM4 interrupt */ +-#define SIIL_GTM8 0x00400000 /* GTM8 interrupt */ +-#if defined (CONFIG_MPC8349) +-#define SIIL_GPIO1 0x00200000 /* GPIO1 interrupt */ +-#define SIIL_GPIO2 0x00100000 /* GPIO2 interrupt */ +-#endif +-#if defined (CONFIG_MPC8360) +-#define SIIL_QEP 0x00200000 /* QE ports interrupt */ +-#define SIIL_SDDR 0x00100000 /* SDDR interrupt */ +-#endif +-#define SIIL_DDR 0x00080000 /* DDR interrupt */ +-#define SIIL_LBC 0x00040000 /* LBC interrupt */ +-#define SIIL_GTM2 0x00020000 /* GTM2 interrupt */ +-#define SIIL_GTM6 0x00010000 /* GTM6 interrupt */ +-#define SIIL_PMC 0x00008000 /* PMC interrupt */ +-#define SIIL_GTM3 0x00000800 /* GTM3 interrupt */ +-#define SIIL_GTM7 0x00000400 /* GTM7 interrupt */ +-#define SIIL_GTM1 0x00000020 /* GTM1 interrupt */ +-#define SIIL_GTM5 0x00000010 /* GTM5 interrupt */ +-#define SIIL_DPTC 0x00000001 /* DPTC interrupt (!!! Invisible for user !!!) */ +-#if defined (CONFIG_MPC8349) +-#define SIIL_RES ~(SIIL_RTCS | SIIL_PIT | SIIL_PCI1 | SIIL_PCI2 \ +- | SIIL_RTCA | SIIL_MU | SIIL_SBA | SIIL_DMA \ +- | SIIL_GTM4 | SIIL_GTM8 | SIIL_GPIO1 | SIIL_GPIO2 \ +- | SIIL_DDR | SIIL_LBC | SIIL_GTM2 | SIIL_GTM6 \ +- | SIIL_PMC |SIIL_GTM3 | SIIL_GTM7 | SIIL_GTM1 \ +- | SIIL_GTM5 |SIIL_DPTC ) +-#endif +-#if defined (CONFIG_MPC8360) +-#define SIIL_RES ~(SIIL_RTCS |SIIL_PIT |SIIL_PCI1 |SIIL_RTCALR \ +- |SIIL_MU |SIIL_SBA |SIIL_DMA |SIIL_GTM4 |SIIL_GTM8 \ +- |SIIL_QEP | SIIL_SDDR| SIIL_DDR |SIIL_LBC |SIIL_GTM2 \ +- |SIIL_GTM6 |SIIL_PMC |SIIL_GTM3 |SIIL_GTM7 |SIIL_GTM1 \ +- |SIIL_GTM5 ) +-#endif +- u32 siprr_a; /* System Internal Interrupt Group A Priority Register (PRR) */ ++ u32 sicfr; /* System Global Interrupt Configuration Register */ ++ u32 sivcr; /* System Global Interrupt Vector Register */ ++ u32 sipnr_h; /* System Internal Interrupt Pending Register - High */ ++ u32 sipnr_l; /* System Internal Interrupt Pending Register - Low */ ++ u32 siprr_a; /* System Internal Interrupt Group A Priority Register */ + u8 res0[8]; +- u32 siprr_d; /* System Internal Interrupt Group D Priority Register (PRR) */ +- u32 simsr_h; /* System Internal Interrupt Mask Register - High (SIIH) */ +- u32 simsr_l; /* System Internal Interrupt Mask Register - Low (SIIL) */ ++ u32 siprr_d; /* System Internal Interrupt Group D Priority Register */ ++ u32 simsr_h; /* System Internal Interrupt Mask Register - High */ ++ u32 simsr_l; /* System Internal Interrupt Mask Register - Low */ + u8 res1[4]; +- u32 sepnr; /* System External Interrupt Pending Register (SEI) */ +- u32 smprr_a; /* System Mixed Interrupt Group A Priority Register (PRR) */ +- u32 smprr_b; /* System Mixed Interrupt Group B Priority Register (PRR) */ +-#define PRR_0 0xe0000000 /* Priority Register, Position 0 programming */ +-#define PRR_1 0x1c000000 /* Priority Register, Position 1 programming */ +-#define PRR_2 0x03800000 /* Priority Register, Position 2 programming */ +-#define PRR_3 0x00700000 /* Priority Register, Position 3 programming */ +-#define PRR_4 0x0000e000 /* Priority Register, Position 4 programming */ +-#define PRR_5 0x00001c00 /* Priority Register, Position 5 programming */ +-#define PRR_6 0x00000380 /* Priority Register, Position 6 programming */ +-#define PRR_7 0x00000070 /* Priority Register, Position 7 programming */ +-#define PRR_RES ~(PRR_0|PRR_1|PRR_2|PRR_3|PRR_4|PRR_5|PRR_6|PRR_7) +- u32 semsr; /* System External Interrupt Mask Register (SEI) */ +-#define SEI_IRQ0 0x80000000 /* IRQ0 external interrupt */ +-#define SEI_IRQ1 0x40000000 /* IRQ1 external interrupt */ +-#define SEI_IRQ2 0x20000000 /* IRQ2 external interrupt */ +-#define SEI_IRQ3 0x10000000 /* IRQ3 external interrupt */ +-#define SEI_IRQ4 0x08000000 /* IRQ4 external interrupt */ +-#define SEI_IRQ5 0x04000000 /* IRQ5 external interrupt */ +-#define SEI_IRQ6 0x02000000 /* IRQ6 external interrupt */ +-#define SEI_IRQ7 0x01000000 /* IRQ7 external interrupt */ +-#define SEI_SIRQ0 0x00008000 /* SIRQ0 external interrupt */ +-#define SEI_RES ~( SEI_IRQ0 | SEI_IRQ1 | SEI_IRQ2 | SEI_IRQ3 \ +- | SEI_IRQ4 | SEI_IRQ5 | SEI_IRQ6 | SEI_IRQ7 \ +- | SEI_SIRQ0) +- u32 secnr; /* System External Interrupt Control Register (SECNR) */ +-#define SECNR_MIXB0T 0xc0000000 /* MIXB0 priority position IPIC output interrupt type */ +-#define SECNR_MIXB1T 0x30000000 /* MIXB1 priority position IPIC output interrupt type */ +-#define SECNR_MIXA0T 0x00c00000 /* MIXA0 priority position IPIC output interrupt type */ +-#define SECNR_SYSA1T 0x00300000 /* MIXA1 priority position IPIC output interrupt type */ +-#define SECNR_EDI0 0x00008000 /* IRQ0 external interrupt edge/level detect */ +-#define SECNR_EDI1 0x00004000 /* IRQ1 external interrupt edge/level detect */ +-#define SECNR_EDI2 0x00002000 /* IRQ2 external interrupt edge/level detect */ +-#define SECNR_EDI3 0x00001000 /* IRQ3 external interrupt edge/level detect */ +-#define SECNR_EDI4 0x00000800 /* IRQ4 external interrupt edge/level detect */ +-#define SECNR_EDI5 0x00000400 /* IRQ5 external interrupt edge/level detect */ +-#define SECNR_EDI6 0x00000200 /* IRQ6 external interrupt edge/level detect */ +-#define SECNR_EDI7 0x00000100 /* IRQ7 external interrupt edge/level detect */ +-#define SECNR_RES ~( SECNR_MIXB0T | SECNR_MIXB1T | SECNR_MIXA0T \ +- | SECNR_SYSA1T | SECNR_EDI0 | SECNR_EDI1 \ +- | SECNR_EDI2 | SECNR_EDI3 | SECNR_EDI4 \ +- | SECNR_EDI5 | SECNR_EDI6 | SECNR_EDI7) +- u32 sersr; /* System Error Status Register (SERR) */ +- u32 sermr; /* System Error Mask Register (SERR) */ +-#define SERR_IRQ0 0x80000000 /* IRQ0 MCP request */ +-#define SERR_WDT 0x40000000 /* WDT MCP request */ +-#define SERR_SBA 0x20000000 /* SBA MCP request */ +-#if defined (CONFIG_MPC8349) +-#define SERR_DDR 0x10000000 /* DDR MCP request */ +-#define SERR_LBC 0x08000000 /* LBC MCP request */ +-#define SERR_PCI1 0x04000000 /* PCI1 MCP request */ +-#define SERR_PCI2 0x02000000 /* PCI2 MCP request */ +-#endif +-#if defined (CONFIG_MPC8360) +-#define SERR_CIEE 0x10000000 /* CIEE MCP request */ +-#define SERR_CMEE 0x08000000 /* CMEEMCP request */ +-#define SERR_PCI 0x04000000 /* PCI MCP request */ +-#endif +-#define SERR_MU 0x01000000 /* MU MCP request */ +-#define SERR_RNC 0x00010000 /* MU MCP request (!!! Non-visible for users !!!) */ +-#if defined (CONFIG_MPC8349) +-#define SERR_RES ~( SERR_IRQ0 | SERR_WDT | SERR_SBA | SERR_DDR \ +- |SERR_LBC | SERR_PCI1 | SERR_PCI2 | SERR_MU \ +- |SERR_RNC ) +-#elif defined (CONFIG_MPC8360) +-#define SERR_RES ~( SERR_IRQ0|SERR_WDT |SERR_SBA |SERR_CIEE\ +- |SERR_CMEE|SERR_PCI|SERR_MU) +-#endif +- u32 sercr; /* System Error Control Register (SERCR) */ +-#define SERCR_MCPR 0x00000001 /* MCP Route */ +-#define SERCR_RES ~(SERCR_MCPR) ++ u32 sepnr; /* System External Interrupt Pending Register */ ++ u32 smprr_a; /* System Mixed Interrupt Group A Priority Register */ ++ u32 smprr_b; /* System Mixed Interrupt Group B Priority Register */ ++ u32 semsr; /* System External Interrupt Mask Register */ ++ u32 secnr; /* System External Interrupt Control Register */ ++ u32 sersr; /* System Error Status Register */ ++ u32 sermr; /* System Error Mask Register */ ++ u32 sercr; /* System Error Control Register */ + u8 res2[4]; +- u32 sifcr_h; /* System Internal Interrupt Force Register - High (SIIH) */ +- u32 sifcr_l; /* System Internal Interrupt Force Register - Low (SIIL) */ +- u32 sefcr; /* System External Interrupt Force Register (SEI) */ +- u32 serfr; /* System Error Force Register (SERR) */ ++ u32 sifcr_h; /* System Internal Interrupt Force Register - High */ ++ u32 sifcr_l; /* System Internal Interrupt Force Register - Low */ ++ u32 sefcr; /* System External Interrupt Force Register */ ++ u32 serfr; /* System Error Force Register */ + u32 scvcr; /* System Critical Interrupt Vector Register */ +-#define SCVCR_CVECX 0xFC000000 /* Backward (MPC8260) compatible +- critical interrupt vector. */ +-#define SCVCR_CVEC 0x0000007F /* Critical interrupt vector */ +-#define SCVCR_RES ~(SCVCR_CVECX|SCVCR_CVEC) + u32 smvcr; /* System Management Interrupt Vector Register */ +-#define SMVCR_CVECX 0xFC000000 /* Backward (MPC8260) compatible +- critical interrupt vector. */ +-#define SMVCR_CVEC 0x0000007F /* Critical interrupt vector */ +-#define SMVCR_RES ~(SMVCR_CVECX|SMVCR_CVEC) + u8 res3[0x98]; + } ipic83xx_t; + +@@ -491,43 +160,14 @@ typedef struct ipic83xx { + */ + typedef struct arbiter83xx { + u32 acr; /* Arbiter Configuration Register */ +-#define ACR_COREDIS 0x10000000 /* Core disable. */ +-#define ACR_COREDIS_SHIFT (31-7) +-#define ACR_PIPE_DEP 0x00070000 /* Pipeline depth (number of outstanding transactions). */ +-#define ACR_PIPE_DEP_SHIFT (31-15) +-#define ACR_PCI_RPTCNT 0x00007000 /* PCI repeat count. */ +-#define ACR_PCI_RPTCNT_SHIFT (31-19) +-#define ACR_RPTCNT 0x00000700 /* Repeat count. */ +-#define ACR_RPTCNT_SHIFT (31-23) +-#define ACR_APARK 0x00000030 /* Address parking. */ +-#define ACR_APARK_SHIFT (31-27) +-#define ACR_PARKM 0x0000000F /* Parking master. */ +-#define ACR_PARKM_SHIFT (31-31) +-#define ACR_RES ~(ACR_COREDIS|ACR_PIPE_DEP|ACR_PCI_RPTCNT|ACR_RPTCNT|ACR_APARK|ACR_PARKM) + u32 atr; /* Arbiter Timers Register */ +-#define ATR_DTO 0x00FF0000 /* Data time out. */ +-#define ATR_ATO 0x000000FF /* Address time out. */ +-#define ATR_RES ~(ATR_DTO|ATR_ATO) + u8 res[4]; +- u32 aer; /* Arbiter Event Register (AE) */ +- u32 aidr; /* Arbiter Interrupt Definition Register (AE) */ +- u32 amr; /* Arbiter Mask Register (AE) */ ++ u32 aer; /* Arbiter Event Register */ ++ u32 aidr; /* Arbiter Interrupt Definition Register */ ++ u32 amr; /* Arbiter Mask Register */ + u32 aeatr; /* Arbiter Event Attributes Register */ +-#define AEATR_EVENT 0x07000000 /* Event type. */ +-#define AEATR_MSTR_ID 0x001F0000 /* Master Id. */ +-#define AEATR_TBST 0x00000800 /* Transfer burst. */ +-#define AEATR_TSIZE 0x00000700 /* Transfer Size. */ +-#define AEATR_TTYPE 0x0000001F /* Transfer Type. */ +-#define AEATR_RES ~(AEATR_EVENT|AEATR_MSTR_ID|AEATR_TBST|AEATR_TSIZE|AEATR_TTYPE) + u32 aeadr; /* Arbiter Event Address Register */ +- u32 aerr; /* Arbiter Event Response Register (AE) */ +-#define AE_ETEA 0x00000020 /* Transfer error. */ +-#define AE_RES_ 0x00000010 /* Reserved transfer type. */ +-#define AE_ECW 0x00000008 /* External control word transfer type. */ +-#define AE_AO 0x00000004 /* Address Only transfer type. */ +-#define AE_DTO 0x00000002 /* Data time out. */ +-#define AE_ATO 0x00000001 /* Address time out. */ +-#define AE_RSRV ~(AE_ETEA|AE_RES_|AE_ECW|AE_AO|AE_DTO|AE_ATO) ++ u32 aerr; /* Arbiter Event Response Register */ + u8 res1[0xDC]; + } arbiter83xx_t; + +@@ -535,184 +175,24 @@ typedef struct arbiter83xx { + * Reset Module + */ + typedef struct reset83xx { +- u32 rcwl; /* RCWL Register */ +-#define RCWL_LBIUCM 0x80000000 /* LBIUCM */ +-#define RCWL_LBIUCM_SHIFT 31 +-#define RCWL_DDRCM 0x40000000 /* DDRCM */ +-#define RCWL_DDRCM_SHIFT 30 +-#if defined (CONFIG_MPC8349) +-#define RCWL_SVCOD 0x30000000 /* SVCOD */ +-#endif +-#define RCWL_SPMF 0x0f000000 /* SPMF */ +-#define RCWL_SPMF_SHIFT 24 +-#define RCWL_COREPLL 0x007F0000 /* COREPLL */ +-#define RCWL_COREPLL_SHIFT 16 +-#define RCWL_CEVCOD 0x000000C0 /* CEVCOD */ +-#define RCWL_CEPDF 0x00000020 /* CEPDF */ +-#define RCWL_CEPDF_SHIFT 5 +-#define RCWL_CEPMF 0x0000001F /* CEPMF */ +-#define RCWL_CEPMF_SHIFT 0 +-#if defined (CONFIG_MPC8349) +-#define RCWL_RES ~(RCWL_LBIUCM|RCWL_DDRCM|RCWL_SVCOD|RCWL_SPMF|RCWL_COREPLL|RCWL_CEVCOD|RCWL_CEPDF|RCWL_CEPMF) +-#elif defined (CONFIG_MPC8360) +-#define RCWL_RES ~(RCWL_LBIUCM|RCWL_DDRCM|RCWL_SPMF|RCWL_COREPLL|RCWL_CEPDF|RCWL_CEPMF) +-#endif +- u32 rcwh; /* RCHL Register */ +-#define RCWH_PCIHOST 0x80000000 /* PCIHOST */ +-#define RCWH_PCIHOST_SHIFT 31 +-#if defined (CONFIG_MPC8349) +-#define RCWH_PCI64 0x40000000 /* PCI64 */ +-#define RCWH_PCI1ARB 0x20000000 /* PCI1ARB */ +-#define RCWH_PCI2ARB 0x10000000 /* PCI2ARB */ +-#elif defined (CONFIG_MPC8360) +-#define RCWH_PCIARB 0x20000000 /* PCI internal arbiter mode. */ +-#define RCWH_PCICKDRV 0x10000000 /* PCI clock output drive. */ +-#endif +-#define RCWH_COREDIS 0x08000000 /* COREDIS */ +-#define RCWH_BMS 0x04000000 /* BMS */ +-#define RCWH_BOOTSEQ 0x03000000 /* BOOTSEQ */ +-#define RCWH_SWEN 0x00800000 /* SWEN */ +-#define RCWH_ROMLOC 0x00700000 /* ROMLOC */ +-#if defined (CONFIG_MPC8349) +-#define RCWH_TSEC1M 0x0000c000 /* TSEC1M */ +-#define RCWH_TSEC2M 0x00003000 /* TSEC2M */ +-#define RCWH_TPR 0x00000100 /* TPR */ +-#elif defined (CONFIG_MPC8360) +-#define RCWH_SDDRIOE 0x00000010 /* Secondary DDR IO Enable. */ +-#endif +-#define RCWH_TLE 0x00000008 /* TLE */ +-#define RCWH_LALE 0x00000004 /* LALE */ +-#if defined (CONFIG_MPC8349) +-#define RCWH_RES ~(RCWH_PCIHOST | RCWH_PCI64 | RCWH_PCI1ARB \ +- | RCWH_PCI2ARB | RCWH_COREDIS | RCWH_BMS \ +- | RCWH_BOOTSEQ | RCWH_SWEN | RCWH_ROMLOC \ +- | RCWH_TSEC1M | RCWH_TSEC2M | RCWH_TPR \ +- | RCWH_TLE | RCWH_LALE) +-#elif defined (CONFIG_MPC8360) +-#define RCWH_RES ~(RCWH_PCIHOST|RCWH_PCIARB|RCWH_PCICKDRV \ +- |RCWH_COREDIS|RCWH_BMS|RCWH_BOOTSEQ|RCWH_SWEN \ +- |RCWH_SDDRIOE |RCWH_TLE) +-#endif ++ u32 rcwl; /* Reset Configuration Word Low Register */ ++ u32 rcwh; /* Reset Configuration Word High Register */ + u8 res0[8]; +- u32 rsr; /* Reset status Register */ +-#define RSR_RSTSRC 0xE0000000 /* Reset source */ +-#define RSR_RSTSRC_SHIFT 29 +-#define RSR_BSF 0x00010000 /* Boot seq. fail */ +-#define RSR_BSF_SHIFT 16 +-#define RSR_SWSR 0x00002000 /* software soft reset */ +-#define RSR_SWSR_SHIFT 13 +-#define RSR_SWHR 0x00001000 /* software hard reset */ +-#define RSR_SWHR_SHIFT 12 +-#define RSR_JHRS 0x00000200 /* jtag hreset */ +-#define RSR_JHRS_SHIFT 9 +-#define RSR_JSRS 0x00000100 /* jtag sreset status */ +-#define RSR_JSRS_SHIFT 8 +-#define RSR_CSHR 0x00000010 /* checkstop reset status */ +-#define RSR_CSHR_SHIFT 4 +-#define RSR_SWRS 0x00000008 /* software watchdog reset status */ +-#define RSR_SWRS_SHIFT 3 +-#define RSR_BMRS 0x00000004 /* bus monitop reset status */ +-#define RSR_BMRS_SHIFT 2 +-#define RSR_SRS 0x00000002 /* soft reset status */ +-#define RSR_SRS_SHIFT 1 +-#define RSR_HRS 0x00000001 /* hard reset status */ +-#define RSR_HRS_SHIFT 0 +-#define RSR_RES ~(RSR_RSTSRC | RSR_BSF | RSR_SWSR | RSR_SWHR | RSR_JHRS | RSR_JSRS | RSR_CSHR | RSR_SWRS | RSR_BMRS | RSR_SRS | RSR_HRS) +- u32 rmr; /* Reset mode Register */ +-#define RMR_CSRE 0x00000001 /* checkstop reset enable */ +-#define RMR_CSRE_SHIFT 0 +-#define RMR_RES ~(RMR_CSRE) +- u32 rpr; /* Reset protection Register */ +- u32 rcr; /* Reset Control Register */ +-#define RCR_SWHR 0x00000002 /* software hard reset */ +-#define RCR_SWSR 0x00000001 /* software soft reset */ +-#define RCR_RES ~(RCR_SWHR | RCR_SWSR) +- u32 rcer; /* Reset Control Enable Register */ +-#define RCER_CRE 0x00000001 /* software hard reset */ +-#define RCER_RES ~(RCER_CRE) ++ u32 rsr; /* Reset Status Register */ ++ u32 rmr; /* Reset Mode Register */ ++ u32 rpr; /* Reset protection Register */ ++ u32 rcr; /* Reset Control Register */ ++ u32 rcer; /* Reset Control Enable Register */ + u8 res1[0xDC]; + } reset83xx_t; + ++/* ++ * Clock Module ++ */ + typedef struct clk83xx { +- u32 spmr; /* system PLL mode Register */ +-#define SPMR_LBIUCM 0x80000000 /* LBIUCM */ +-#define SPMR_DDRCM 0x40000000 /* DDRCM */ +-#if defined (CONFIG_MPC8349) +-#define SPMR_SVCOD 0x30000000 /* SVCOD */ +-#endif +-#define SPMR_SPMF 0x0F000000 /* SPMF */ +-#define SPMR_CKID 0x00800000 /* CKID */ +-#define SPMR_CKID_SHIFT 23 +-#define SPMR_COREPLL 0x007F0000 /* COREPLL */ +-#define SPMR_CEVCOD 0x000000C0 /* CEVCOD */ +-#define SPMR_CEPDF 0x00000020 /* CEPDF */ +-#define SPMR_CEPMF 0x0000001F /* CEPMF */ +-#if defined (CONFIG_MPC8349) +-#define SPMR_RES ~(SPMR_LBIUCM | SPMR_DDRCM | SPMR_SVCOD \ +- | SPMR_SPMF | SPMR_CKID | SPMR_COREPLL \ +- | SPMR_CEVCOD | SPMR_CEPDF | SPMR_CEPMF) +-#elif defined (CONFIG_MPC8360) +-#define SPMR_RES ~(SPMR_LBIUCM | SPMR_DDRCM | SPMR_SPMF \ +- | SPMR_CKID | SPMR_COREPLL | SPMR_CEVCOD \ +- | SPMR_CEPDF | SPMR_CEPMF) +-#endif +- u32 occr; /* output clock control Register */ +-#define OCCR_PCICOE0 0x80000000 /* PCICOE0 */ +-#define OCCR_PCICOE1 0x40000000 /* PCICOE1 */ +-#define OCCR_PCICOE2 0x20000000 /* PCICOE2 */ +-#if defined (CONFIG_MPC8349) +-#define OCCR_PCICOE3 0x10000000 /* PCICOE3 */ +-#define OCCR_PCICOE4 0x08000000 /* PCICOE4 */ +-#define OCCR_PCICOE5 0x04000000 /* PCICOE5 */ +-#define OCCR_PCICOE6 0x02000000 /* PCICOE6 */ +-#define OCCR_PCICOE7 0x01000000 /* PCICOE7 */ +-#endif +-#define OCCR_PCICD0 0x00800000 /* PCICD0 */ +-#define OCCR_PCICD1 0x00400000 /* PCICD1 */ +-#define OCCR_PCICD2 0x00200000 /* PCICD2 */ +-#if defined (CONFIG_MPC8349) +-#define OCCR_PCICD3 0x00100000 /* PCICD3 */ +-#define OCCR_PCICD4 0x00080000 /* PCICD4 */ +-#define OCCR_PCICD5 0x00040000 /* PCICD5 */ +-#define OCCR_PCICD6 0x00020000 /* PCICD6 */ +-#define OCCR_PCICD7 0x00010000 /* PCICD7 */ +-#define OCCR_PCI1CR 0x00000002 /* PCI1CR */ +-#define OCCR_PCI2CR 0x00000001 /* PCI2CR */ +-#define OCCR_RES ~(OCCR_PCICOE0 | OCCR_PCICOE1 | OCCR_PCICOE2 \ +- | OCCR_PCICOE3 | OCCR_PCICOE4 | OCCR_PCICOE5 \ +- | OCCR_PCICOE6 | OCCR_PCICOE7 | OCCR_PCICD0 \ +- | OCCR_PCICD1 | OCCR_PCICD2 | OCCR_PCICD3 \ +- | OCCR_PCICD4 | OCCR_PCICD5 | OCCR_PCICD6 \ +- | OCCR_PCICD7 | OCCR_PCI1CR | OCCR_PCI2CR ) +-#endif +-#if defined (CONFIG_MPC8360) +-#define OCCR_PCICR 0x00000002 /* PCI clock rate */ +-#define OCCR_RES ~(OCCR_PCICOE0|OCCR_PCICOE1|OCCR_PCICOE2 \ +- |OCCR_PCICD0|OCCR_PCICD1|OCCR_PCICD2|OCCR_PCICR ) +-#endif +- u32 sccr; /* system clock control Register */ +-#if defined (CONFIG_MPC8349) +-#define SCCR_TSEC1CM 0xc0000000 /* TSEC1CM */ +-#define SCCR_TSEC1CM_SHIFT 30 +-#define SCCR_TSEC2CM 0x30000000 /* TSEC2CM */ +-#define SCCR_TSEC2CM_SHIFT 28 +-#endif +-#define SCCR_ENCCM 0x03000000 /* ENCCM */ +-#define SCCR_ENCCM_SHIFT 24 +-#if defined (CONFIG_MPC8349) +-#define SCCR_USBMPHCM 0x00c00000 /* USBMPHCM */ +-#define SCCR_USBMPHCM_SHIFT 22 +-#define SCCR_USBDRCM 0x00300000 /* USBDRCM */ +-#define SCCR_USBDRCM_SHIFT 20 +-#endif +-#define SCCR_PCICM 0x00010000 /* PCICM */ +-#if defined (CONFIG_MPC8349) +-#define SCCR_RES ~( SCCR_TSEC1CM | SCCR_TSEC2CM | SCCR_ENCCM \ +- | SCCR_USBMPHCM | SCCR_USBDRCM | SCCR_PCICM) +-#endif +-#if defined (CONFIG_MPC8360) +-#define SCCR_RES ~(SCCR_ENCCM | SCCR_PCICM) +-#endif ++ u32 spmr; /* system PLL mode Register */ ++ u32 occr; /* output clock control Register */ ++ u32 sccr; /* system clock control Register */ + u8 res0[0xF4]; + } clk83xx_t; + +@@ -720,27 +200,14 @@ typedef struct clk83xx { + * Power Management Control Module + */ + typedef struct pmc83xx { +- u32 pmccr; /* PMC Configuration Register */ +-#define PMCCR_SLPEN 0x00000001 /* System Low Power Enable */ +-#define PMCCR_DLPEN 0x00000002 /* DDR SDRAM Low Power Enable */ +-#if defined (CONFIG_MPC8360) +-#define PMCCR_SDLPEN 0x00000004 /* Secondary DDR SDRAM Low Power Enable */ +-#define PMCCR_RES ~(PMCCR_SLPEN | PMCCR_DLPEN | PMCCR_SDLPEN) +-#elif defined (CONFIG_MPC8349) +-#define PMCCR_RES ~(PMCCR_SLPEN | PMCCR_DLPEN) +-#endif +- u32 pmcer; /* PMC Event Register */ +-#define PMCER_PMCI 0x00000001 /* PMC Interrupt */ +-#define PMCER_RES ~(PMCER_PMCI) +- u32 pmcmr; /* PMC Mask Register */ +-#define PMCMR_PMCIE 0x0001 /* PMC Interrupt Enable */ +-#define PMCMR_RES ~(PMCMR_PMCIE) ++ u32 pmccr; /* PMC Configuration Register */ ++ u32 pmcer; /* PMC Event Register */ ++ u32 pmcmr; /* PMC Mask Register */ + u8 res0[0xF4]; + } pmc83xx_t; + +-#if defined (CONFIG_MPC8349) + /* +- * general purpose I/O module ++ * General purpose I/O module + */ + typedef struct gpio83xx { + u32 dir; /* direction register */ +@@ -751,124 +218,20 @@ typedef struct gpio83xx { + u32 icr; /* external interrupt control register */ + u8 res0[0xE8]; + } gpio83xx_t; +-#endif + +-#if defined (CONFIG_MPC8360) + /* + * QE Ports Interrupts Registers + */ + typedef struct qepi83xx { + u8 res0[0xC]; + u32 qepier; /* QE Ports Interrupt Event Register */ +-#define QEPIER_PA15 0x80000000 +-#define QEPIER_PA16 0x40000000 +-#define QEPIER_PA29 0x20000000 +-#define QEPIER_PA30 0x10000000 +-#define QEPIER_PB3 0x08000000 +-#define QEPIER_PB5 0x04000000 +-#define QEPIER_PB12 0x02000000 +-#define QEPIER_PB13 0x01000000 +-#define QEPIER_PB26 0x00800000 +-#define QEPIER_PB27 0x00400000 +-#define QEPIER_PC27 0x00200000 +-#define QEPIER_PC28 0x00100000 +-#define QEPIER_PC29 0x00080000 +-#define QEPIER_PD12 0x00040000 +-#define QEPIER_PD13 0x00020000 +-#define QEPIER_PD16 0x00010000 +-#define QEPIER_PD17 0x00008000 +-#define QEPIER_PD26 0x00004000 +-#define QEPIER_PD27 0x00002000 +-#define QEPIER_PE12 0x00001000 +-#define QEPIER_PE13 0x00000800 +-#define QEPIER_PE24 0x00000400 +-#define QEPIER_PE25 0x00000200 +-#define QEPIER_PE26 0x00000100 +-#define QEPIER_PE27 0x00000080 +-#define QEPIER_PE31 0x00000040 +-#define QEPIER_PF20 0x00000020 +-#define QEPIER_PG31 0x00000010 +-#define QEPIER_RES ~(QEPIER_PA15|QEPIER_PA16|QEPIER_PA29|QEPIER_PA30|QEPIER_PB3 \ +- |QEPIER_PB5|QEPIER_PB12|QEPIER_PB13|QEPIER_PB26|QEPIER_PB27 \ +- |QEPIER_PC27|QEPIER_PC28|QEPIER_PC29|QEPIER_PD12|QEPIER_PD13 \ +- |QEPIER_PD16|QEPIER_PD17|QEPIER_PD26|QEPIER_PD27|QEPIER_PE12 \ +- |QEPIER_PE13|QEPIER_PE24|QEPIER_PE25|QEPIER_PE26|QEPIER_PE27 \ +- |QEPIER_PE31|QEPIER_PF20|QEPIER_PG31) + u32 qepimr; /* QE Ports Interrupt Mask Register */ +-#define QEPIMR_PA15 0x80000000 +-#define QEPIMR_PA16 0x40000000 +-#define QEPIMR_PA29 0x20000000 +-#define QEPIMR_PA30 0x10000000 +-#define QEPIMR_PB3 0x08000000 +-#define QEPIMR_PB5 0x04000000 +-#define QEPIMR_PB12 0x02000000 +-#define QEPIMR_PB13 0x01000000 +-#define QEPIMR_PB26 0x00800000 +-#define QEPIMR_PB27 0x00400000 +-#define QEPIMR_PC27 0x00200000 +-#define QEPIMR_PC28 0x00100000 +-#define QEPIMR_PC29 0x00080000 +-#define QEPIMR_PD12 0x00040000 +-#define QEPIMR_PD13 0x00020000 +-#define QEPIMR_PD16 0x00010000 +-#define QEPIMR_PD17 0x00008000 +-#define QEPIMR_PD26 0x00004000 +-#define QEPIMR_PD27 0x00002000 +-#define QEPIMR_PE12 0x00001000 +-#define QEPIMR_PE13 0x00000800 +-#define QEPIMR_PE24 0x00000400 +-#define QEPIMR_PE25 0x00000200 +-#define QEPIMR_PE26 0x00000100 +-#define QEPIMR_PE27 0x00000080 +-#define QEPIMR_PE31 0x00000040 +-#define QEPIMR_PF20 0x00000020 +-#define QEPIMR_PG31 0x00000010 +-#define QEPIMR_RES ~(QEPIMR_PA15|QEPIMR_PA16|QEPIMR_PA29|QEPIMR_PA30|QEPIMR_PB3 \ +- |QEPIMR_PB5|QEPIMR_PB12|QEPIMR_PB13|QEPIMR_PB26|QEPIMR_PB27 \ +- |QEPIMR_PC27|QEPIMR_PC28|QEPIMR_PC29|QEPIMR_PD12|QEPIMR_PD13 \ +- |QEPIMR_PD16|QEPIMR_PD17|QEPIMR_PD26|QEPIMR_PD27|QEPIMR_PE12 \ +- |QEPIMR_PE13|QEPIMR_PE24|QEPIMR_PE25|QEPIMR_PE26|QEPIMR_PE27 \ +- |QEPIMR_PE31|QEPIMR_PF20|QEPIMR_PG31) + u32 qepicr; /* QE Ports Interrupt Control Register */ +-#define QEPICR_PA15 0x80000000 +-#define QEPICR_PA16 0x40000000 +-#define QEPICR_PA29 0x20000000 +-#define QEPICR_PA30 0x10000000 +-#define QEPICR_PB3 0x08000000 +-#define QEPICR_PB5 0x04000000 +-#define QEPICR_PB12 0x02000000 +-#define QEPICR_PB13 0x01000000 +-#define QEPICR_PB26 0x00800000 +-#define QEPICR_PB27 0x00400000 +-#define QEPICR_PC27 0x00200000 +-#define QEPICR_PC28 0x00100000 +-#define QEPICR_PC29 0x00080000 +-#define QEPICR_PD12 0x00040000 +-#define QEPICR_PD13 0x00020000 +-#define QEPICR_PD16 0x00010000 +-#define QEPICR_PD17 0x00008000 +-#define QEPICR_PD26 0x00004000 +-#define QEPICR_PD27 0x00002000 +-#define QEPICR_PE12 0x00001000 +-#define QEPICR_PE13 0x00000800 +-#define QEPICR_PE24 0x00000400 +-#define QEPICR_PE25 0x00000200 +-#define QEPICR_PE26 0x00000100 +-#define QEPICR_PE27 0x00000080 +-#define QEPICR_PE31 0x00000040 +-#define QEPICR_PF20 0x00000020 +-#define QEPICR_PG31 0x00000010 +-#define QEPICR_RES ~(QEPICR_PA15|QEPICR_PA16|QEPICR_PA29|QEPICR_PA30|QEPICR_PB3 \ +- |QEPICR_PB5|QEPICR_PB12|QEPICR_PB13|QEPICR_PB26|QEPICR_PB27 \ +- |QEPICR_PC27|QEPICR_PC28|QEPICR_PC29|QEPICR_PD12|QEPICR_PD13 \ +- |QEPICR_PD16|QEPICR_PD17|QEPICR_PD26|QEPICR_PD27|QEPICR_PE12 \ +- |QEPICR_PE13|QEPICR_PE24|QEPICR_PE25|QEPICR_PE26|QEPICR_PE27 \ +- |QEPICR_PE31|QEPICR_PF20|QEPICR_PG31) + u8 res1[0xE8]; + } qepi83xx_t; + + /* +- * general purpose I/O module ++ * QE Parallel I/O Ports + */ + typedef struct gpio_n { + u32 podr; /* Open Drain Register */ +@@ -879,238 +242,83 @@ typedef struct gpio_n { + u32 ppar2; /* Pin Assignment Register 2 */ + } gpio_n_t; + +-typedef struct gpio83xx { ++typedef struct qegpio83xx { + gpio_n_t ioport[0x7]; + u8 res0[0x358]; +-} gpio83xx_t; ++} qepio83xx_t; + + /* + * QE Secondary Bus Access Windows + */ +- + typedef struct qesba83xx { + u32 lbmcsar; /* Local bus memory controller start address */ +-#define LBMCSAR_SA 0x000FFFFF /* 20 most-significant bits of the start address */ +-#define LBMCSAR_RES ~(LBMCSAR_SA) + u32 sdmcsar; /* Secondary DDR memory controller start address */ +-#define SDMCSAR_SA 0x000FFFFF /* 20 most-significant bits of the start address */ +-#define SDMCSAR_RES ~(SDMCSAR_SA) + u8 res0[0x38]; + u32 lbmcear; /* Local bus memory controller end address */ +-#define LBMCEAR_EA 0x000FFFFF /* 20 most-significant bits of the end address */ +-#define LBMCEAR_RES ~(LBMCEAR_EA) + u32 sdmcear; /* Secondary DDR memory controller end address */ +-#define SDMCEAR_EA 0x000FFFFF /* 20 most-significant bits of the end address */ +-#define SDMCEAR_RES ~(SDMCEAR_EA) + u8 res1[0x38]; +- u32 lbmcar; /* Local bus memory controller attributes */ +-#define LBMCAR_WEN 0x00000001 /* Forward transactions to the QE local bus */ +-#define LBMCAR_RES ~(LBMCAR_WEN) ++ u32 lbmcar; /* Local bus memory controller attributes */ + u32 sdmcar; /* Secondary DDR memory controller attributes */ +-#define SDMCAR_WEN 0x00000001 /* Forward transactions to the second DDR bus */ +-#define SDMCAR_RES ~(SDMCAR_WEN) +- u8 res2[0x778]; ++ u8 res2[0x378]; + } qesba83xx_t; +-#endif + + /* + * DDR Memory Controller Memory Map + */ + typedef struct ddr_cs_bnds { + u32 csbnds; +-#define CSBNDS_SA 0x00FF0000 +-#define CSBNDS_SA_SHIFT 8 +-#define CSBNDS_EA 0x000000FF +-#define CSBNDS_EA_SHIFT 24 + u8 res0[4]; + } ddr_cs_bnds_t; + + typedef struct ddr83xx { +- ddr_cs_bnds_t csbnds[4]; /**< Chip Select x Memory Bounds */ ++ ddr_cs_bnds_t csbnds[4];/* Chip Select x Memory Bounds */ + u8 res0[0x60]; +- u32 cs_config[4]; /**< Chip Select x Configuration */ +-#define CSCONFIG_EN 0x80000000 +-#define CSCONFIG_AP 0x00800000 +-#define CSCONFIG_ROW_BIT 0x00000700 +-#define CSCONFIG_ROW_BIT_12 0x00000000 +-#define CSCONFIG_ROW_BIT_13 0x00000100 +-#define CSCONFIG_ROW_BIT_14 0x00000200 +-#define CSCONFIG_COL_BIT 0x00000007 +-#define CSCONFIG_COL_BIT_8 0x00000000 +-#define CSCONFIG_COL_BIT_9 0x00000001 +-#define CSCONFIG_COL_BIT_10 0x00000002 +-#define CSCONFIG_COL_BIT_11 0x00000003 ++ u32 cs_config[4]; /* Chip Select x Configuration */ + u8 res1[0x78]; +- u32 timing_cfg_1; /**< SDRAM Timing Configuration 1 */ +-#define TIMING_CFG1_PRETOACT 0x70000000 +-#define TIMING_CFG1_PRETOACT_SHIFT 28 +-#define TIMING_CFG1_ACTTOPRE 0x0F000000 +-#define TIMING_CFG1_ACTTOPRE_SHIFT 24 +-#define TIMING_CFG1_ACTTORW 0x00700000 +-#define TIMING_CFG1_ACTTORW_SHIFT 20 +-#define TIMING_CFG1_CASLAT 0x00070000 +-#define TIMING_CFG1_CASLAT_SHIFT 16 +-#define TIMING_CFG1_REFREC 0x0000F000 +-#define TIMING_CFG1_REFREC_SHIFT 12 +-#define TIMING_CFG1_WRREC 0x00000700 +-#define TIMING_CFG1_WRREC_SHIFT 8 +-#define TIMING_CFG1_ACTTOACT 0x00000070 +-#define TIMING_CFG1_ACTTOACT_SHIFT 4 +-#define TIMING_CFG1_WRTORD 0x00000007 +-#define TIMING_CFG1_WRTORD_SHIFT 0 +-#define TIMING_CFG1_CASLAT_20 0x00030000 /* CAS latency = 2.0 */ +-#define TIMING_CFG1_CASLAT_25 0x00040000 /* CAS latency = 2.5 */ +- +- u32 timing_cfg_2; /**< SDRAM Timing Configuration 2 */ +-#define TIMING_CFG2_CPO 0x0F000000 +-#define TIMING_CFG2_CPO_SHIFT 24 +-#define TIMING_CFG2_ACSM 0x00080000 +-#define TIMING_CFG2_WR_DATA_DELAY 0x00001C00 +-#define TIMING_CFG2_WR_DATA_DELAY_SHIFT 10 +-#define TIMING_CFG2_CPO_DEF 0x00000000 /* default (= CASLAT + 1) */ +- +- u32 sdram_cfg; /**< SDRAM Control Configuration */ +-#define SDRAM_CFG_MEM_EN 0x80000000 +-#define SDRAM_CFG_SREN 0x40000000 +-#define SDRAM_CFG_ECC_EN 0x20000000 +-#define SDRAM_CFG_RD_EN 0x10000000 +-#define SDRAM_CFG_SDRAM_TYPE 0x03000000 +-#define SDRAM_CFG_SDRAM_TYPE_SHIFT 24 +-#define SDRAM_CFG_DYN_PWR 0x00200000 +-#define SDRAM_CFG_32_BE 0x00080000 +-#define SDRAM_CFG_8_BE 0x00040000 +-#define SDRAM_CFG_NCAP 0x00020000 +-#define SDRAM_CFG_2T_EN 0x00008000 +-#define SDRAM_CFG_SDRAM_TYPE_DDR 0x02000000 +- ++ u32 timing_cfg_1; /* SDRAM Timing Configuration 1 */ ++ u32 timing_cfg_2; /* SDRAM Timing Configuration 2 */ ++ u32 sdram_cfg; /* SDRAM Control Configuration */ + u8 res2[4]; +- u32 sdram_mode; /**< SDRAM Mode Configuration */ +-#define SDRAM_MODE_ESD 0xFFFF0000 +-#define SDRAM_MODE_ESD_SHIFT 16 +-#define SDRAM_MODE_SD 0x0000FFFF +-#define SDRAM_MODE_SD_SHIFT 0 +-#define DDR_MODE_EXT_MODEREG 0x4000 /* select extended mode reg */ +-#define DDR_MODE_EXT_OPMODE 0x3FF8 /* operating mode, mask */ +-#define DDR_MODE_EXT_OP_NORMAL 0x0000 /* normal operation */ +-#define DDR_MODE_QFC 0x0004 /* QFC / compatibility, mask */ +-#define DDR_MODE_QFC_COMP 0x0000 /* compatible to older SDRAMs */ +-#define DDR_MODE_WEAK 0x0002 /* weak drivers */ +-#define DDR_MODE_DLL_DIS 0x0001 /* disable DLL */ +-#define DDR_MODE_CASLAT 0x0070 /* CAS latency, mask */ +-#define DDR_MODE_CASLAT_15 0x0010 /* CAS latency 1.5 */ +-#define DDR_MODE_CASLAT_20 0x0020 /* CAS latency 2 */ +-#define DDR_MODE_CASLAT_25 0x0060 /* CAS latency 2.5 */ +-#define DDR_MODE_CASLAT_30 0x0030 /* CAS latency 3 */ +-#define DDR_MODE_BTYPE_SEQ 0x0000 /* sequential burst */ +-#define DDR_MODE_BTYPE_ILVD 0x0008 /* interleaved burst */ +-#define DDR_MODE_BLEN_2 0x0001 /* burst length 2 */ +-#define DDR_MODE_BLEN_4 0x0002 /* burst length 4 */ +-#define DDR_REFINT_166MHZ_7US 1302 /* exact value for 7.8125 µs */ +-#define DDR_BSTOPRE 256 /* use 256 cycles as a starting point */ +-#define DDR_MODE_MODEREG 0x0000 /* select mode register */ +- ++ u32 sdram_mode; /* SDRAM Mode Configuration */ + u8 res3[8]; +- u32 sdram_interval; /**< SDRAM Interval Configuration */ +-#define SDRAM_INTERVAL_REFINT 0x3FFF0000 +-#define SDRAM_INTERVAL_REFINT_SHIFT 16 +-#define SDRAM_INTERVAL_BSTOPRE 0x00003FFF +-#define SDRAM_INTERVAL_BSTOPRE_SHIFT 0 ++ u32 sdram_interval; /* SDRAM Interval Configuration */ + u8 res9[8]; + u32 sdram_clk_cntl; +-#define DDR_SDRAM_CLK_CNTL_SS_EN 0x80000000 +-#define DDR_SDRAM_CLK_CNTL_CLK_ADJUST_025 0x01000000 +-#define DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05 0x02000000 +-#define DDR_SDRAM_CLK_CNTL_CLK_ADJUST_075 0x03000000 +-#define DDR_SDRAM_CLK_CNTL_CLK_ADJUST_1 0x04000000 +- + u8 res4[0xCCC]; +- u32 data_err_inject_hi; /**< Memory Data Path Error Injection Mask High */ +- u32 data_err_inject_lo; /**< Memory Data Path Error Injection Mask Low */ +- u32 ecc_err_inject; /**< Memory Data Path Error Injection Mask ECC */ +-#define ECC_ERR_INJECT_EMB (0x80000000>>22) /* ECC Mirror Byte */ +-#define ECC_ERR_INJECT_EIEN (0x80000000>>23) /* Error Injection Enable */ +-#define ECC_ERR_INJECT_EEIM (0xff000000>>24) /* ECC Erroe Injection Enable */ +-#define ECC_ERR_INJECT_EEIM_SHIFT 0 ++ u32 data_err_inject_hi; /* Memory Data Path Error Injection Mask High */ ++ u32 data_err_inject_lo; /* Memory Data Path Error Injection Mask Low */ ++ u32 ecc_err_inject; /* Memory Data Path Error Injection Mask ECC */ + u8 res5[0x14]; +- u32 capture_data_hi; /**< Memory Data Path Read Capture High */ +- u32 capture_data_lo; /**< Memory Data Path Read Capture Low */ +- u32 capture_ecc; /**< Memory Data Path Read Capture ECC */ +-#define CAPTURE_ECC_ECE (0xff000000>>24) +-#define CAPTURE_ECC_ECE_SHIFT 0 ++ u32 capture_data_hi; /* Memory Data Path Read Capture High */ ++ u32 capture_data_lo; /* Memory Data Path Read Capture Low */ ++ u32 capture_ecc; /* Memory Data Path Read Capture ECC */ + u8 res6[0x14]; +- u32 err_detect; /**< Memory Error Detect */ +-#define ECC_ERROR_DETECT_MME (0x80000000>>0) /* Multiple Memory Errors */ +-#define ECC_ERROR_DETECT_MBE (0x80000000>>28) /* Multiple-Bit Error */ +-#define ECC_ERROR_DETECT_SBE (0x80000000>>29) /* Single-Bit ECC Error Pickup */ +-#define ECC_ERROR_DETECT_MSE (0x80000000>>31) /* Memory Select Error */ +- u32 err_disable; /**< Memory Error Disable */ +-#define ECC_ERROR_DISABLE_MBED (0x80000000>>28) /* Multiple-Bit ECC Error Disable */ +-#define ECC_ERROR_DISABLE_SBED (0x80000000>>29) /* Sinle-Bit ECC Error disable */ +-#define ECC_ERROR_DISABLE_MSED (0x80000000>>31) /* Memory Select Error Disable */ +-#define ECC_ERROR_ENABLE ~(ECC_ERROR_DISABLE_MSED|ECC_ERROR_DISABLE_SBED|ECC_ERROR_DISABLE_MBED) +- u32 err_int_en; /**< Memory Error Interrupt Enable */ +-#define ECC_ERR_INT_EN_MBEE (0x80000000>>28) /* Multiple-Bit ECC Error Interrupt Enable */ +-#define ECC_ERR_INT_EN_SBEE (0x80000000>>29) /* Single-Bit ECC Error Interrupt Enable */ +-#define ECC_ERR_INT_EN_MSEE (0x80000000>>31) /* Memory Select Error Interrupt Enable */ +-#define ECC_ERR_INT_DISABLE ~(ECC_ERR_INT_EN_MBEE|ECC_ERR_INT_EN_SBEE|ECC_ERR_INT_EN_MSEE) +- u32 capture_attributes; /**< Memory Error Attributes Capture */ +-#define ECC_CAPT_ATTR_BNUM (0xe0000000>>1) /* Data Beat Num */ +-#define ECC_CAPT_ATTR_BNUM_SHIFT 28 +-#define ECC_CAPT_ATTR_TSIZ (0xc0000000>>6) /* Transaction Size */ +-#define ECC_CAPT_ATTR_TSIZ_FOUR_DW 0 +-#define ECC_CAPT_ATTR_TSIZ_ONE_DW 1 +-#define ECC_CAPT_ATTR_TSIZ_TWO_DW 2 +-#define ECC_CAPT_ATTR_TSIZ_THREE_DW 3 +-#define ECC_CAPT_ATTR_TSIZ_SHIFT 24 +-#define ECC_CAPT_ATTR_TSRC (0xf8000000>>11) /* Transaction Source */ +-#define ECC_CAPT_ATTR_TSRC_E300_CORE_DT 0x0 +-#define ECC_CAPT_ATTR_TSRC_E300_CORE_IF 0x2 +-#define ECC_CAPT_ATTR_TSRC_TSEC1 0x4 +-#define ECC_CAPT_ATTR_TSRC_TSEC2 0x5 +-#define ECC_CAPT_ATTR_TSRC_USB (0x06|0x07) +-#define ECC_CAPT_ATTR_TSRC_ENCRYPT 0x8 +-#define ECC_CAPT_ATTR_TSRC_I2C 0x9 +-#define ECC_CAPT_ATTR_TSRC_JTAG 0xA +-#define ECC_CAPT_ATTR_TSRC_PCI1 0xD +-#define ECC_CAPT_ATTR_TSRC_PCI2 0xE +-#define ECC_CAPT_ATTR_TSRC_DMA 0xF +-#define ECC_CAPT_ATTR_TSRC_SHIFT 16 +-#define ECC_CAPT_ATTR_TTYP (0xe0000000>>18) /* Transaction Type */ +-#define ECC_CAPT_ATTR_TTYP_WRITE 0x1 +-#define ECC_CAPT_ATTR_TTYP_READ 0x2 +-#define ECC_CAPT_ATTR_TTYP_R_M_W 0x3 +-#define ECC_CAPT_ATTR_TTYP_SHIFT 12 +-#define ECC_CAPT_ATTR_VLD (0x80000000>>31) /* Valid */ +- u32 capture_address; /**< Memory Error Address Capture */ +- u32 capture_ext_address;/**< Memory Error Extended Address Capture */ +- u32 err_sbe; /**< Memory Single-Bit ECC Error Management */ +-#define ECC_ERROR_MAN_SBET (0xff000000>>8) /* Single-Bit Error Threshold 0..255 */ +-#define ECC_ERROR_MAN_SBET_SHIFT 16 +-#define ECC_ERROR_MAN_SBEC (0xff000000>>24) /* Single Bit Error Counter 0..255 */ +-#define ECC_ERROR_MAN_SBEC_SHIFT 0 ++ u32 err_detect; /* Memory Error Detect */ ++ u32 err_disable; /* Memory Error Disable */ ++ u32 err_int_en; /* Memory Error Interrupt Enable */ ++ u32 capture_attributes; /* Memory Error Attributes Capture */ ++ u32 capture_address; /* Memory Error Address Capture */ ++ u32 capture_ext_address;/* Memory Error Extended Address Capture */ ++ u32 err_sbe; /* Memory Single-Bit ECC Error Management */ + u8 res7[0xA4]; + u32 debug_reg; + u8 res8[0xFC]; + } ddr83xx_t; + + /* +- * I2C1 Controller +- */ +- +-/* + * DUART + */ + typedef struct duart83xx { +- u8 urbr_ulcr_udlb; /**< combined register for URBR, UTHR and UDLB */ +- u8 uier_udmb; /**< combined register for UIER and UDMB */ +- u8 uiir_ufcr_uafr; /**< combined register for UIIR, UFCR and UAFR */ +- u8 ulcr; /**< line control register */ +- u8 umcr; /**< MODEM control register */ +- u8 ulsr; /**< line status register */ +- u8 umsr; /**< MODEM status register */ +- u8 uscr; /**< scratch register */ ++ u8 urbr_ulcr_udlb; /* combined register for URBR, UTHR and UDLB */ ++ u8 uier_udmb; /* combined register for UIER and UDMB */ ++ u8 uiir_ufcr_uafr; /* combined register for UIIR, UFCR and UAFR */ ++ u8 ulcr; /* line control register */ ++ u8 umcr; /* MODEM control register */ ++ u8 ulsr; /* line status register */ ++ u8 umsr; /* MODEM status register */ ++ u8 uscr; /* scratch register */ + u8 res0[8]; +- u8 udsr; /**< DMA status register */ ++ u8 udsr; /* DMA status register */ + u8 res1[3]; + u8 res2[0xEC]; + } duart83xx_t; +@@ -1119,75 +327,52 @@ typedef struct duart83xx { + * Local Bus Controller Registers + */ + typedef struct lbus_bank { +- u32 br; /**< Base Register */ +- u32 or; /**< Base Register */ ++ u32 br; /* Base Register */ ++ u32 or; /* Option Register */ + } lbus_bank_t; + + typedef struct lbus83xx { + lbus_bank_t bank[8]; + u8 res0[0x28]; +- u32 mar; /**< UPM Address Register */ ++ u32 mar; /* UPM Address Register */ + u8 res1[0x4]; +- u32 mamr; /**< UPMA Mode Register */ +- u32 mbmr; /**< UPMB Mode Register */ +- u32 mcmr; /**< UPMC Mode Register */ ++ u32 mamr; /* UPMA Mode Register */ ++ u32 mbmr; /* UPMB Mode Register */ ++ u32 mcmr; /* UPMC Mode Register */ + u8 res2[0x8]; +- u32 mrtpr; /**< Memory Refresh Timer Prescaler Register */ +- u32 mdr; /**< UPM Data Register */ ++ u32 mrtpr; /* Memory Refresh Timer Prescaler Register */ ++ u32 mdr; /* UPM Data Register */ + u8 res3[0x8]; +- u32 lsdmr; /**< SDRAM Mode Register */ ++ u32 lsdmr; /* SDRAM Mode Register */ + u8 res4[0x8]; +- u32 lurt; /**< UPM Refresh Timer */ +- u32 lsrt; /**< SDRAM Refresh Timer */ ++ u32 lurt; /* UPM Refresh Timer */ ++ u32 lsrt; /* SDRAM Refresh Timer */ + u8 res5[0x8]; +- u32 ltesr; /**< Transfer Error Status Register */ +- u32 ltedr; /**< Transfer Error Disable Register */ +- u32 lteir; /**< Transfer Error Interrupt Register */ +- u32 lteatr; /**< Transfer Error Attributes Register */ +- u32 ltear; /**< Transfer Error Address Register */ ++ u32 ltesr; /* Transfer Error Status Register */ ++ u32 ltedr; /* Transfer Error Disable Register */ ++ u32 lteir; /* Transfer Error Interrupt Register */ ++ u32 lteatr; /* Transfer Error Attributes Register */ ++ u32 ltear; /* Transfer Error Address Register */ + u8 res6[0xC]; +- u32 lbcr; /**< Configuration Register */ +-#define LBCR_LDIS 0x80000000 +-#define LBCR_LDIS_SHIFT 31 +-#define LBCR_BCTLC 0x00C00000 +-#define LBCR_BCTLC_SHIFT 22 +-#define LBCR_LPBSE 0x00020000 +-#define LBCR_LPBSE_SHIFT 17 +-#define LBCR_EPAR 0x00010000 +-#define LBCR_EPAR_SHIFT 16 +-#define LBCR_BMT 0x0000FF00 +-#define LBCR_BMT_SHIFT 8 +- u32 lcrr; /**< Clock Ratio Register */ +-#define LCRR_DBYP 0x80000000 +-#define LCRR_DBYP_SHIFT 31 +-#define LCRR_BUFCMDC 0x30000000 +-#define LCRR_BUFCMDC_SHIFT 28 +-#define LCRR_ECL 0x03000000 +-#define LCRR_ECL_SHIFT 24 +-#define LCRR_EADC 0x00030000 +-#define LCRR_EADC_SHIFT 16 +-#define LCRR_CLKDIV 0x0000000F +-#define LCRR_CLKDIV_SHIFT 0 +- ++ u32 lbcr; /* Configuration Register */ ++ u32 lcrr; /* Clock Ratio Register */ + u8 res7[0x28]; + u8 res8[0xF00]; + } lbus83xx_t; + +-#if defined (CONFIG_MPC8349) + /* + * Serial Peripheral Interface + */ + typedef struct spi83xx { +- u32 mode; /**< mode register */ +- u32 event; /**< event register */ +- u32 mask; /**< mask register */ +- u32 com; /**< command register */ ++ u32 mode; /* mode register */ ++ u32 event; /* event register */ ++ u32 mask; /* mask register */ ++ u32 com; /* command register */ + u8 res0[0x10]; +- u32 tx; /**< transmit register */ +- u32 rx; /**< receive register */ +- u8 res1[0xD8]; ++ u32 tx; /* transmit register */ ++ u32 rx; /* receive register */ ++ u8 res1[0xFD8]; + } spi83xx_t; +-#endif + + /* + * DMA/Messaging Unit +@@ -1197,21 +382,17 @@ typedef struct dma83xx { + u32 omisr; /* 0x30 Outbound message interrupt status register */ + u32 omimr; /* 0x34 Outbound message interrupt mask register */ + u32 res1[0x6]; /* 0x38-0x49 reserved */ +- + u32 imr0; /* 0x50 Inbound message register 0 */ + u32 imr1; /* 0x54 Inbound message register 1 */ + u32 omr0; /* 0x58 Outbound message register 0 */ + u32 omr1; /* 0x5C Outbound message register 1 */ +- + u32 odr; /* 0x60 Outbound doorbell register */ + u32 res2; /* 0x64-0x67 reserved */ + u32 idr; /* 0x68 Inbound doorbell register */ + u32 res3[0x5]; /* 0x6C-0x79 reserved */ +- + u32 imisr; /* 0x80 Inbound message interrupt status register */ + u32 imimr; /* 0x84 Inbound message interrupt mask register */ + u32 res4[0x1E]; /* 0x88-0x99 reserved */ +- + u32 dmamr0; /* 0x100 DMA 0 mode register */ + u32 dmasr0; /* 0x104 DMA 0 status register */ + u32 dmacdar0; /* 0x108 DMA 0 current descriptor address register */ +@@ -1223,7 +404,6 @@ typedef struct dma83xx { + u32 dmabcr0; /* 0x120 DMA 0 byte count register */ + u32 dmandar0; /* 0x124 DMA 0 next descriptor address register */ + u32 res8[0x16]; /* 0x128-0x179 reserved */ +- + u32 dmamr1; /* 0x180 DMA 1 mode register */ + u32 dmasr1; /* 0x184 DMA 1 status register */ + u32 dmacdar1; /* 0x188 DMA 1 current descriptor address register */ +@@ -1235,7 +415,6 @@ typedef struct dma83xx { + u32 dmabcr1; /* 0x1A0 DMA 1 byte count register */ + u32 dmandar1; /* 0x1A4 DMA 1 next descriptor address register */ + u32 res12[0x16]; /* 0x1A8-0x199 reserved */ +- + u32 dmamr2; /* 0x200 DMA 2 mode register */ + u32 dmasr2; /* 0x204 DMA 2 status register */ + u32 dmacdar2; /* 0x208 DMA 2 current descriptor address register */ +@@ -1247,7 +426,6 @@ typedef struct dma83xx { + u32 dmabcr2; /* 0x220 DMA 2 byte count register */ + u32 dmandar2; /* 0x224 DMA 2 next descriptor address register */ + u32 res16[0x16]; /* 0x228-0x279 reserved */ +- + u32 dmamr3; /* 0x280 DMA 3 mode register */ + u32 dmasr3; /* 0x284 DMA 3 status register */ + u32 dmacdar3; /* 0x288 DMA 3 current descriptor address register */ +@@ -1258,39 +436,15 @@ typedef struct dma83xx { + u32 res19; /* 0x29C reserved */ + u32 dmabcr3; /* 0x2A0 DMA 3 byte count register */ + u32 dmandar3; /* 0x2A4 DMA 3 next descriptor address register */ +- + u32 dmagsr; /* 0x2A8 DMA general status register */ + u32 res20[0x15]; /* 0x2AC-0x2FF reserved */ + } dma83xx_t; + +-/* DMAMRn bits */ +-#define DMA_CHANNEL_START (0x00000001) /* Bit - DMAMRn CS */ +-#define DMA_CHANNEL_TRANSFER_MODE_DIRECT (0x00000004) /* Bit - DMAMRn CTM */ +-#define DMA_CHANNEL_SOURCE_ADRESSS_HOLD_EN (0x00001000) /* Bit - DMAMRn SAHE */ +-#define DMA_CHANNEL_SOURCE_ADDRESS_HOLD_1B (0x00000000) /* 2Bit- DMAMRn SAHTS 1byte */ +-#define DMA_CHANNEL_SOURCE_ADDRESS_HOLD_2B (0x00004000) /* 2Bit- DMAMRn SAHTS 2bytes */ +-#define DMA_CHANNEL_SOURCE_ADDRESS_HOLD_4B (0x00008000) /* 2Bit- DMAMRn SAHTS 4bytes */ +-#define DMA_CHANNEL_SOURCE_ADDRESS_HOLD_8B (0x0000c000) /* 2Bit- DMAMRn SAHTS 8bytes */ +-#define DMA_CHANNEL_SNOOP (0x00010000) /* Bit - DMAMRn DMSEN */ +- +-/* DMASRn bits */ +-#define DMA_CHANNEL_BUSY (0x00000004) /* Bit - DMASRn CB */ +-#define DMA_CHANNEL_TRANSFER_ERROR (0x00000080) /* Bit - DMASRn TE */ +- + /* + * PCI Software Configuration Registers + */ + typedef struct pciconf83xx { + u32 config_address; +-#define PCI_CONFIG_ADDRESS_EN 0x80000000 +-#define PCI_CONFIG_ADDRESS_BN_SHIFT 16 +-#define PCI_CONFIG_ADDRESS_BN_MASK 0x00ff0000 +-#define PCI_CONFIG_ADDRESS_DN_SHIFT 11 +-#define PCI_CONFIG_ADDRESS_DN_MASK 0x0000f800 +-#define PCI_CONFIG_ADDRESS_FN_SHIFT 8 +-#define PCI_CONFIG_ADDRESS_FN_MASK 0x00000700 +-#define PCI_CONFIG_ADDRESS_RN_SHIFT 0 +-#define PCI_CONFIG_ADDRESS_RN_MASK 0x000000fc + u32 config_data; + u32 int_ack; + u8 res[116]; +@@ -1313,34 +467,6 @@ typedef struct pci_outbound_window { + */ + typedef struct ios83xx { + pot83xx_t pot[6]; +-#define POTAR_TA_MASK 0x000fffff +-#define POBAR_BA_MASK 0x000fffff +-#define POCMR_EN 0x80000000 +-#define POCMR_IO 0x40000000 /* 0--memory space 1--I/O space */ +-#define POCMR_SE 0x20000000 /* streaming enable */ +-#define POCMR_DST 0x10000000 /* 0--PCI1 1--PCI2 */ +-#define POCMR_CM_MASK 0x000fffff +-#define POCMR_CM_4G 0x00000000 +-#define POCMR_CM_2G 0x00080000 +-#define POCMR_CM_1G 0x000C0000 +-#define POCMR_CM_512M 0x000E0000 +-#define POCMR_CM_256M 0x000F0000 +-#define POCMR_CM_128M 0x000F8000 +-#define POCMR_CM_64M 0x000FC000 +-#define POCMR_CM_32M 0x000FE000 +-#define POCMR_CM_16M 0x000FF000 +-#define POCMR_CM_8M 0x000FF800 +-#define POCMR_CM_4M 0x000FFC00 +-#define POCMR_CM_2M 0x000FFE00 +-#define POCMR_CM_1M 0x000FFF00 +-#define POCMR_CM_512K 0x000FFF80 +-#define POCMR_CM_256K 0x000FFFC0 +-#define POCMR_CM_128K 0x000FFFE0 +-#define POCMR_CM_64K 0x000FFFF0 +-#define POCMR_CM_32K 0x000FFFF8 +-#define POCMR_CM_16K 0x000FFFFC +-#define POCMR_CM_8K 0x000FFFFE +-#define POCMR_CM_4K 0x000FFFFF + u8 res0[0x60]; + u32 pmcr; + u8 res1[4]; +@@ -1353,74 +479,13 @@ typedef struct ios83xx { + */ + typedef struct pcictrl83xx { + u32 esr; +-#define ESR_MERR 0x80000000 +-#define ESR_APAR 0x00000400 +-#define ESR_PCISERR 0x00000200 +-#define ESR_MPERR 0x00000100 +-#define ESR_TPERR 0x00000080 +-#define ESR_NORSP 0x00000040 +-#define ESR_TABT 0x00000020 + u32 ecdr; +-#define ECDR_APAR 0x00000400 +-#define ECDR_PCISERR 0x00000200 +-#define ECDR_MPERR 0x00000100 +-#define ECDR_TPERR 0x00000080 +-#define ECDR_NORSP 0x00000040 +-#define ECDR_TABT 0x00000020 + u32 eer; +-#define EER_APAR 0x00000400 +-#define EER_PCISERR 0x00000200 +-#define EER_MPERR 0x00000100 +-#define EER_TPERR 0x00000080 +-#define EER_NORSP 0x00000040 +-#define EER_TABT 0x00000020 + u32 eatcr; +-#define EATCR_ERRTYPR_MASK 0x70000000 +-#define EATCR_ERRTYPR_APR 0x00000000 /* address parity error */ +-#define EATCR_ERRTYPR_WDPR 0x10000000 /* write data parity error */ +-#define EATCR_ERRTYPR_RDPR 0x20000000 /* read data parity error */ +-#define EATCR_ERRTYPR_MA 0x30000000 /* master abort */ +-#define EATCR_ERRTYPR_TA 0x40000000 /* target abort */ +-#define EATCR_ERRTYPR_SE 0x50000000 /* system error indication received */ +-#define EATCR_ERRTYPR_PEA 0x60000000 /* parity error indication received on a read */ +-#define EATCR_ERRTYPR_PEW 0x70000000 /* parity error indication received on a write */ +-#define EATCR_BN_MASK 0x0f000000 /* beat number */ +-#define EATCR_BN_1st 0x00000000 +-#define EATCR_BN_2ed 0x01000000 +-#define EATCR_BN_3rd 0x02000000 +-#define EATCR_BN_4th 0x03000000 +-#define EATCR_BN_5th 0x0400000 +-#define EATCR_BN_6th 0x05000000 +-#define EATCR_BN_7th 0x06000000 +-#define EATCR_BN_8th 0x07000000 +-#define EATCR_BN_9th 0x08000000 +-#define EATCR_TS_MASK 0x00300000 /* transaction size */ +-#define EATCR_TS_4 0x00000000 +-#define EATCR_TS_1 0x00100000 +-#define EATCR_TS_2 0x00200000 +-#define EATCR_TS_3 0x00300000 +-#define EATCR_ES_MASK 0x000f0000 /* error source */ +-#define EATCR_ES_EM 0x00000000 /* external master */ +-#define EATCR_ES_DMA 0x00050000 +-#define EATCR_CMD_MASK 0x0000f000 +-#if defined (CONFIG_MPC8349) +-#define EATCR_HBE_MASK 0x00000f00 /* PCI high byte enable */ +-#endif +-#define EATCR_BE_MASK 0x000000f0 /* PCI byte enable */ +-#if defined (CONFIG_MPC8349) +-#define EATCR_HPB 0x00000004 /* high parity bit */ +-#endif +-#define EATCR_PB 0x00000002 /* parity bit */ +-#define EATCR_VI 0x00000001 /* error information valid */ + u32 eacr; + u32 eeacr; +-#if defined (CONFIG_MPC8349) + u32 edlcr; + u32 edhcr; +-#elif defined (CONFIG_MPC8360) +- u32 edcr; /* was edlcr */ +- u8 res_edcr[0x4]; +-#endif + u32 gcr; + u32 ecr; + u32 gsr; +@@ -1443,41 +508,8 @@ typedef struct pcictrl83xx { + u8 res6[4]; + u32 piwar0; + u8 res7[132]; +-#define PITAR_TA_MASK 0x000fffff +-#define PIBAR_MASK 0xffffffff +-#define PIEBAR_EBA_MASK 0x000fffff +-#define PIWAR_EN 0x80000000 +-#define PIWAR_PF 0x20000000 +-#define PIWAR_RTT_MASK 0x000f0000 +-#define PIWAR_RTT_NO_SNOOP 0x00040000 +-#define PIWAR_RTT_SNOOP 0x00050000 +-#define PIWAR_WTT_MASK 0x0000f000 +-#define PIWAR_WTT_NO_SNOOP 0x00004000 +-#define PIWAR_WTT_SNOOP 0x00005000 +-#define PIWAR_IWS_MASK 0x0000003F +-#define PIWAR_IWS_4K 0x0000000B +-#define PIWAR_IWS_8K 0x0000000C +-#define PIWAR_IWS_16K 0x0000000D +-#define PIWAR_IWS_32K 0x0000000E +-#define PIWAR_IWS_64K 0x0000000F +-#define PIWAR_IWS_128K 0x00000010 +-#define PIWAR_IWS_256K 0x00000011 +-#define PIWAR_IWS_512K 0x00000012 +-#define PIWAR_IWS_1M 0x00000013 +-#define PIWAR_IWS_2M 0x00000014 +-#define PIWAR_IWS_4M 0x00000015 +-#define PIWAR_IWS_8M 0x00000016 +-#define PIWAR_IWS_16M 0x00000017 +-#define PIWAR_IWS_32M 0x00000018 +-#define PIWAR_IWS_64M 0x00000019 +-#define PIWAR_IWS_128M 0x0000001A +-#define PIWAR_IWS_256M 0x0000001B +-#define PIWAR_IWS_512M 0x0000001C +-#define PIWAR_IWS_1G 0x0000001D +-#define PIWAR_IWS_2G 0x0000001E + } pcictrl83xx_t; + +-#if defined (CONFIG_MPC8349) + /* + * USB + */ +@@ -1491,7 +523,6 @@ typedef struct usb83xx { + typedef struct tsec83xx { + u8 fixme[0x1000]; + } tsec83xx_t; +-#endif + + /* + * Security +@@ -1500,581 +531,82 @@ typedef struct security83xx { + u8 fixme[0x10000]; + } security83xx_t; + +-#if defined (CONFIG_MPC8360) +-/* +- * iram +- */ +-typedef struct iram83xx { +- u32 iadd; /* I-RAM address register */ +- u32 idata; /* I-RAM data register */ +- u8 res0[0x78]; +-} iram83xx_t; +- +-/* +- * Interrupt Controller +- */ +-typedef struct irq83xx { +- u32 cicr; /* QE system interrupt configuration */ +- u32 civec; /* QE system interrupt vector register */ +- u32 cripnr; /* QE RISC interrupt pending register */ +- u32 cipnr; /* QE system interrupt pending register */ +- u32 cipxcc; /* QE interrupt priority register */ +- u32 cipycc; /* QE interrupt priority register */ +- u32 cipwcc; /* QE interrupt priority register */ +- u32 cipzcc; /* QE interrupt priority register */ +- u32 cimr; /* QE system interrupt mask register */ +- u32 crimr; /* QE RISC interrupt mask register */ +- u32 cicnr; /* QE system interrupt control register */ +- u8 res0[0x4]; +- u32 ciprta; /* QE system interrupt priority register for RISC tasks A */ +- u32 ciprtb; /* QE system interrupt priority register for RISC tasks B */ +- u8 res1[0x4]; +- u32 cricr; /* QE system RISC interrupt control */ +- u8 res2[0x20]; +- u32 chivec; /* QE high system interrupt vector */ +- u8 res3[0x1C]; +-} irq83xx_t; +- +-/* +- * Communications Processor +- */ +-typedef struct cp83xx { +- u32 cecr; /* QE command register */ +- u32 ceccr; /* QE controller configuration register */ +- u32 cecdr; /* QE command data register */ +- u8 res0[0xA]; +- u16 ceter; /* QE timer event register */ +- u8 res1[0x2]; +- u16 cetmr; /* QE timers mask register */ +- u32 cetscr; /* QE time-stamp timer control register */ +- u32 cetsr1; /* QE time-stamp register 1 */ +- u32 cetsr2; /* QE time-stamp register 2 */ +- u8 res2[0x8]; +- u32 cevter; /* QE virtual tasks event register */ +- u32 cevtmr; /* QE virtual tasks mask register */ +- u16 cercr; /* QE RAM control register */ +- u8 res3[0x2]; +- u8 res4[0x24]; +- u16 ceexe1; /* QE external request 1 event register */ +- u8 res5[0x2]; +- u16 ceexm1; /* QE external request 1 mask register */ +- u8 res6[0x2]; +- u16 ceexe2; /* QE external request 2 event register */ +- u8 res7[0x2]; +- u16 ceexm2; /* QE external request 2 mask register */ +- u8 res8[0x2]; +- u16 ceexe3; /* QE external request 3 event register */ +- u8 res9[0x2]; +- u16 ceexm3; /* QE external request 3 mask register */ +- u8 res10[0x2]; +- u16 ceexe4; /* QE external request 4 event register */ +- u8 res11[0x2]; +- u16 ceexm4; /* QE external request 4 mask register */ +- u8 res12[0x2]; +- u8 res13[0x280]; +-} cp83xx_t; +- +-/* +- * QE Multiplexer +- */ +- +-typedef struct qmx83xx { +- u32 cmxgcr; /* CMX general clock route register */ +- u32 cmxsi1cr_l; /* CMX SI1 clock route low register */ +- u32 cmxsi1cr_h; /* CMX SI1 clock route high register */ +- u32 cmxsi1syr; /* CMX SI1 SYNC route register */ +- u32 cmxucr1; /* CMX UCC1, UCC3 clock route register */ +- u32 cmxucr2; /* CMX UCC5, UCC7 clock route register */ +- u32 cmxucr3; /* CMX UCC2, UCC4 clock route register */ +- u32 cmxucr4; /* CMX UCC6, UCC8 clock route register */ +- u32 cmxupcr; /* CMX UPC clock route register */ +- u8 res0[0x1C]; +-} qmx83xx_t; +- +-/* +-* QE Timers +-*/ +- +-typedef struct qet83xx { +- u8 gtcfr1; /* Timer 1 and Timer 2 global configuration register */ +- u8 res0[0x3]; +- u8 gtcfr2; /* Timer 3 and timer 4 global configuration register */ +- u8 res1[0xB]; +- u16 gtmdr1; /* Timer 1 mode register */ +- u16 gtmdr2; /* Timer 2 mode register */ +- u16 gtrfr1; /* Timer 1 reference register */ +- u16 gtrfr2; /* Timer 2 reference register */ +- u16 gtcpr1; /* Timer 1 capture register */ +- u16 gtcpr2; /* Timer 2 capture register */ +- u16 gtcnr1; /* Timer 1 counter */ +- u16 gtcnr2; /* Timer 2 counter */ +- u16 gtmdr3; /* Timer 3 mode register */ +- u16 gtmdr4; /* Timer 4 mode register */ +- u16 gtrfr3; /* Timer 3 reference register */ +- u16 gtrfr4; /* Timer 4 reference register */ +- u16 gtcpr3; /* Timer 3 capture register */ +- u16 gtcpr4; /* Timer 4 capture register */ +- u16 gtcnr3; /* Timer 3 counter */ +- u16 gtcnr4; /* Timer 4 counter */ +- u16 gtevr1; /* Timer 1 event register */ +- u16 gtevr2; /* Timer 2 event register */ +- u16 gtevr3; /* Timer 3 event register */ +- u16 gtevr4; /* Timer 4 event register */ +- u16 gtps; /* Timer 1 prescale register */ +- u8 res2[0x46]; +-} qet83xx_t; +- +-/* +-* spi +-*/ +- +-typedef struct spi83xx { +- u8 res0[0x20]; +- u32 spmode; /* SPI mode register */ +- u8 res1[0x2]; +- u8 spie; /* SPI event register */ +- u8 res2[0x1]; +- u8 res3[0x2]; +- u8 spim; /* SPI mask register */ +- u8 res4[0x1]; +- u8 res5[0x1]; +- u8 spcom; /* SPI command register */ +- u8 res6[0x2]; +- u32 spitd; /* SPI transmit data register (cpu mode) */ +- u32 spird; /* SPI receive data register (cpu mode) */ +- u8 res7[0x8]; +-} spi83xx_t; +- +-/* +-* mcc +-*/ +- +-typedef struct mcc83xx { +- u32 mcce; /* MCC event register */ +- u32 mccm; /* MCC mask register */ +- u32 mccf; /* MCC configuration register */ +- u32 merl; /* MCC emergency request level register */ +- u8 res0[0xF0]; +-} mcc83xx_t; +- +-/* +-* brg +-*/ +- +-typedef struct brg83xx { +- u32 brgc1; /* BRG1 configuration register */ +- u32 brgc2; /* BRG2 configuration register */ +- u32 brgc3; /* BRG3 configuration register */ +- u32 brgc4; /* BRG4 configuration register */ +- u32 brgc5; /* BRG5 configuration register */ +- u32 brgc6; /* BRG6 configuration register */ +- u32 brgc7; /* BRG7 configuration register */ +- u32 brgc8; /* BRG8 configuration register */ +- u32 brgc9; /* BRG9 configuration register */ +- u32 brgc10; /* BRG10 configuration register */ +- u32 brgc11; /* BRG11 configuration register */ +- u32 brgc12; /* BRG12 configuration register */ +- u32 brgc13; /* BRG13 configuration register */ +- u32 brgc14; /* BRG14 configuration register */ +- u32 brgc15; /* BRG15 configuration register */ +- u32 brgc16; /* BRG16 configuration register */ +- u8 res0[0x40]; +-} brg83xx_t; +- +-/* +-* USB +-*/ +- +-typedef struct usb83xx { +- u8 usmod; /* USB mode register */ +- u8 usadd; /* USB address register */ +- u8 uscom; /* USB command register */ +- u8 res0[0x1]; +- u16 usep0; /* USB endpoint register 0 */ +- u16 usep1; /* USB endpoint register 1 */ +- u16 usep2; /* USB endpoint register 2 */ +- u16 usep3; /* USB endpoint register 3 */ +- u8 res1[0x4]; +- u16 usber; /* USB event register */ +- u8 res2[0x2]; +- u16 usbmr; /* USB mask register */ +- u8 res3[0x1]; +- u8 usbs; /* USB status register */ +- u32 ussft; /* USB start of frame timer */ +- u8 res4[0x24]; +-} usb83xx_t; +- +-/* +-* SI +-*/ +- +-typedef struct si1_83xx { +- u16 siamr1; /* SI1 TDMA mode register */ +- u16 sibmr1; /* SI1 TDMB mode register */ +- u16 sicmr1; /* SI1 TDMC mode register */ +- u16 sidmr1; /* SI1 TDMD mode register */ +- u8 siglmr1_h; /* SI1 global mode register high */ +- u8 res0[0x1]; +- u8 sicmdr1_h; /* SI1 command register high */ +- u8 res2[0x1]; +- u8 sistr1_h; /* SI1 status register high */ +- u8 res3[0x1]; +- u16 sirsr1_h; /* SI1 RAM shadow address register high */ +- u8 sitarc1; /* SI1 RAM counter Tx TDMA */ +- u8 sitbrc1; /* SI1 RAM counter Tx TDMB */ +- u8 sitcrc1; /* SI1 RAM counter Tx TDMC */ +- u8 sitdrc1; /* SI1 RAM counter Tx TDMD */ +- u8 sirarc1; /* SI1 RAM counter Rx TDMA */ +- u8 sirbrc1; /* SI1 RAM counter Rx TDMB */ +- u8 sircrc1; /* SI1 RAM counter Rx TDMC */ +- u8 sirdrc1; /* SI1 RAM counter Rx TDMD */ +- u8 res4[0x8]; +- u16 siemr1; /* SI1 TDME mode register 16 bits */ +- u16 sifmr1; /* SI1 TDMF mode register 16 bits */ +- u16 sigmr1; /* SI1 TDMG mode register 16 bits */ +- u16 sihmr1; /* SI1 TDMH mode register 16 bits */ +- u8 siglmg1_l; /* SI1 global mode register low 8 bits */ +- u8 res5[0x1]; +- u8 sicmdr1_l; /* SI1 command register low 8 bits */ +- u8 res6[0x1]; +- u8 sistr1_l; /* SI1 status register low 8 bits */ +- u8 res7[0x1]; +- u16 sirsr1_l; /* SI1 RAM shadow address register low 16 bits */ +- u8 siterc1; /* SI1 RAM counter Tx TDME 8 bits */ +- u8 sitfrc1; /* SI1 RAM counter Tx TDMF 8 bits */ +- u8 sitgrc1; /* SI1 RAM counter Tx TDMG 8 bits */ +- u8 sithrc1; /* SI1 RAM counter Tx TDMH 8 bits */ +- u8 sirerc1; /* SI1 RAM counter Rx TDME 8 bits */ +- u8 sirfrc1; /* SI1 RAM counter Rx TDMF 8 bits */ +- u8 sirgrc1; /* SI1 RAM counter Rx TDMG 8 bits */ +- u8 sirhrc1; /* SI1 RAM counter Rx TDMH 8 bits */ +- u8 res8[0x8]; +- u32 siml1; /* SI1 multiframe limit register */ +- u8 siedm1; /* SI1 extended diagnostic mode register */ +- u8 res9[0xBB]; +-} si1_83xx_t; +- +-/* +-* SI Routing Tables +-*/ +- +-typedef struct sir83xx { +- u8 tx[0x400]; +- u8 rx[0x400]; +- u8 res0[0x800]; +-} sir83xx_t; +- +-/* +-* ucc +-*/ +- +-typedef struct uslow { +- u32 gumr_l; /* UCCx general mode register (low) */ +- u32 gumr_h; /* UCCx general mode register (high) */ +- u16 upsmr; /* UCCx protocol-specific mode register */ +- u8 res0[0x2]; +- u16 utodr; /* UCCx transmit on demand register */ +- u16 udsr; /* UCCx data synchronization register */ +- u16 ucce; /* UCCx event register */ +- u8 res1[0x2]; +- u16 uccm; /* UCCx mask register */ +- u8 res2[0x1]; +- u8 uccs; /* UCCx status register */ +- u8 res3[0x1E8]; +-} uslow_t; +- +-typedef struct ufast { +- u32 gumr; /* UCCx general mode register */ +- u32 upsmr; /* UCCx protocol-specific mode register */ +- u16 utodr; /* UCCx transmit on demand register */ +- u8 res0[0x2]; +- u16 udsr; /* UCCx data synchronization register */ +- u8 res1[0x2]; +- u32 ucce; /* UCCx event register */ +- u32 uccm; /* UCCx mask register. */ +- u8 uccs; /* UCCx status register */ +- u8 res2[0x7]; +- u32 urfb; /* UCC receive FIFO base */ +- u16 urfs; /* UCC receive FIFO size */ +- u8 res3[0x2]; +- u16 urfet; /* UCC receive FIFO emergency threshold */ +- u16 urfset; /* UCC receive FIFO special emergency threshold */ +- u32 utfb; /* UCC transmit FIFO base */ +- u16 utfs; /* UCC transmit FIFO size */ +- u8 res4[0x2]; +- u16 utfet; /* UCC transmit FIFO emergency threshold */ +- u8 res5[0x2]; +- u16 utftt; /* UCC transmit FIFO transmit threshold */ +- u8 res6[0x2]; +- u16 utpt; /* UCC transmit polling timer */ +- u32 urtry; /* UCC retry counter register */ +- u8 res7[0x4C]; +- u8 guemr; /* UCC general extended mode register */ +- u8 res8[0x3]; +- u8 res9[0x6C]; +- u32 maccfg1; /* Mac configuration register #1 */ +- u32 maccfg2; /* Mac configuration register #2 */ +- u16 ipgifg; /* Interframe gap register */ +- u8 res10[0x2]; +- u32 hafdup; /* Half-duplex register */ +- u8 res11[0xC]; +- u32 emtr; /* Ethernet MAC test register */ +- u32 miimcfg; /* MII mgmt configuration register */ +- u32 miimcom; /* MII mgmt command register */ +- u32 miimadd; /* MII mgmt address register */ +- u32 miimcon; /* MII mgmt control register */ +- u32 miistat; /* MII mgmt status register */ +- u32 miimnd; /* MII mgmt indication register */ +- u32 ifctl; /* Interface control register */ +- u32 ifstat; /* Interface status register */ +- u32 macstnaddr1; /* Station address part 1 register */ +- u32 macstnaddr2; /* Station address part 2 register */ +- u8 res12[0x8]; +- u32 uempr; /* UCC Ethernet MAC parameter register */ +- u32 utbipa; /* UCC TBI address */ +- u16 uescr; /* UCC Ethernet statistics control register */ +- u8 res13[0x26]; +- u32 tx64; /* Transmit and receive 64-byte frame counter */ +- u32 tx127; /* Transmit and receive 65- to 127-byte frame counter */ +- u32 tx255; /* Transmit and receive 128- to 255-byte frame counter */ +- u32 rx64; /* Receive and receive 64-byte frame counter */ +- u32 rx127; /* Receive and receive 65- to 127-byte frame counter */ +- u32 rx255; /* Receive and receive 128- to 255-byte frame counter */ +- u32 txok; /* Transmit good bytes counter */ +- u32 txcf; /* Transmit control frame counter */ +- u32 tmca; /* Transmit multicast control frame counter */ +- u32 tbca; /* Transmit broadcast packet counter */ +- u32 rxfok; /* Receive frame OK counter */ +- u32 rbyt; /* Receive good and bad bytes counter */ +- u32 rxbok; /* Receive bytes OK counter */ +- u32 rmca; /* Receive multicast packet counter */ +- u32 rbca; /* Receive broadcast packet counter */ +- u32 scar; /* Statistics carry register */ +- u32 scam; /* Statistics carry mask register */ +- u8 res14[0x3C]; +-} ufast_t; +- +-typedef struct ucc83xx { +- union { +- uslow_t slow; +- ufast_t fast; +- }; +-} ucc83xx_t; +- +-/* +-* MultiPHY UTOPIA POS Controllers +-*/ +- +-typedef struct upc83xx { +- u32 upgcr; /* UTOPIA/POS general configuration register */ +-#define UPGCR_PROTOCOL 0x80000000 /* protocol ul2 or pl2 */ +-#define UPGCR_TMS 0x40000000 /* Transmit master/slave mode */ +-#define UPGCR_RMS 0x20000000 /* Receive master/slave mode */ +-#define UPGCR_ADDR 0x10000000 /* Master MPHY Addr multiplexing: */ +-#define UPGCR_DIAG 0x01000000 /* Diagnostic mode */ +- u32 uplpa; /* UTOPIA/POS last PHY address */ +- u32 uphec; /* ATM HEC register */ +- u32 upuc; /* UTOPIA/POS UCC configuration */ +- u32 updc1; /* UTOPIA/POS device 1 configuration */ +- u32 updc2; /* UTOPIA/POS device 2 configuration */ +- u32 updc3; /* UTOPIA/POS device 3 configuration */ +- u32 updc4; /* UTOPIA/POS device 4 configuration */ +- u32 upstpa; /* UTOPIA/POS STPA threshold */ +- u8 res0[0xC]; +- u32 updrs1_h; /* UTOPIA/POS device 1 rate select */ +- u32 updrs1_l; /* UTOPIA/POS device 1 rate select */ +- u32 updrs2_h; /* UTOPIA/POS device 2 rate select */ +- u32 updrs2_l; /* UTOPIA/POS device 2 rate select */ +- u32 updrs3_h; /* UTOPIA/POS device 3 rate select */ +- u32 updrs3_l; /* UTOPIA/POS device 3 rate select */ +- u32 updrs4_h; /* UTOPIA/POS device 4 rate select */ +- u32 updrs4_l; /* UTOPIA/POS device 4 rate select */ +- u32 updrp1; /* UTOPIA/POS device 1 receive priority low */ +- u32 updrp2; /* UTOPIA/POS device 2 receive priority low */ +- u32 updrp3; /* UTOPIA/POS device 3 receive priority low */ +- u32 updrp4; /* UTOPIA/POS device 4 receive priority low */ +- u32 upde1; /* UTOPIA/POS device 1 event */ +- u32 upde2; /* UTOPIA/POS device 2 event */ +- u32 upde3; /* UTOPIA/POS device 3 event */ +- u32 upde4; /* UTOPIA/POS device 4 event */ +- u16 uprp1; +- u16 uprp2; +- u16 uprp3; +- u16 uprp4; +- u8 res1[0x8]; +- u16 uptirr1_0; /* Device 1 transmit internal rate 0 */ +- u16 uptirr1_1; /* Device 1 transmit internal rate 1 */ +- u16 uptirr1_2; /* Device 1 transmit internal rate 2 */ +- u16 uptirr1_3; /* Device 1 transmit internal rate 3 */ +- u16 uptirr2_0; /* Device 2 transmit internal rate 0 */ +- u16 uptirr2_1; /* Device 2 transmit internal rate 1 */ +- u16 uptirr2_2; /* Device 2 transmit internal rate 2 */ +- u16 uptirr2_3; /* Device 2 transmit internal rate 3 */ +- u16 uptirr3_0; /* Device 3 transmit internal rate 0 */ +- u16 uptirr3_1; /* Device 3 transmit internal rate 1 */ +- u16 uptirr3_2; /* Device 3 transmit internal rate 2 */ +- u16 uptirr3_3; /* Device 3 transmit internal rate 3 */ +- u16 uptirr4_0; /* Device 4 transmit internal rate 0 */ +- u16 uptirr4_1; /* Device 4 transmit internal rate 1 */ +- u16 uptirr4_2; /* Device 4 transmit internal rate 2 */ +- u16 uptirr4_3; /* Device 4 transmit internal rate 3 */ +- u32 uper1; /* Device 1 port enable register */ +- u32 uper2; /* Device 2 port enable register */ +- u32 uper3; /* Device 3 port enable register */ +- u32 uper4; /* Device 4 port enable register */ +- u8 res2[0x150]; +-} upc83xx_t; +- +-/* +-* SDMA +-*/ +- +-typedef struct sdma83xx { +- u32 sdsr; /* Serial DMA status register */ +- u32 sdmr; /* Serial DMA mode register */ +- u32 sdtr1; /* SDMA system bus threshold register */ +- u32 sdtr2; /* SDMA secondary bus threshold register */ +- u32 sdhy1; /* SDMA system bus hysteresis register */ +- u32 sdhy2; /* SDMA secondary bus hysteresis register */ +- u32 sdta1; /* SDMA system bus address register */ +- u32 sdta2; /* SDMA secondary bus address register */ +- u32 sdtm1; /* SDMA system bus MSNUM register */ +- u32 sdtm2; /* SDMA secondary bus MSNUM register */ +- u8 res0[0x10]; +- u32 sdaqr; /* SDMA address bus qualify register */ +- u32 sdaqmr; /* SDMA address bus qualify mask register */ +- u8 res1[0x4]; +- u32 sdwbcr; /* SDMA CAM entries base register */ +- u8 res2[0x38]; +-} sdma83xx_t; +- +-/* +-* Debug Space +-*/ +- +-typedef struct dbg83xx { +- u32 bpdcr; /* Breakpoint debug command register */ +- u32 bpdsr; /* Breakpoint debug status register */ +- u32 bpdmr; /* Breakpoint debug mask register */ +- u32 bprmrr0; /* Breakpoint request mode risc register 0 */ +- u32 bprmrr1; /* Breakpoint request mode risc register 1 */ +- u8 res0[0x8]; +- u32 bprmtr0; /* Breakpoint request mode trb register 0 */ +- u32 bprmtr1; /* Breakpoint request mode trb register 1 */ +- u8 res1[0x8]; +- u32 bprmir; /* Breakpoint request mode immediate register */ +- u32 bprmsr; /* Breakpoint request mode serial register */ +- u32 bpemr; /* Breakpoint exit mode register */ +- u8 res2[0x48]; +-} dbg83xx_t; +- +-/* +-* RISC Special Registers (Trap and Breakpoint) +-*/ +- +-typedef struct rsp83xx { +- u8 fixme[0x100]; +-} rsp83xx_t; +-#endif ++#if defined(CONFIG_MPC8349) ++typedef struct immap { ++ sysconf83xx_t sysconf; /* System configuration */ ++ wdt83xx_t wdt; /* Watch Dog Timer (WDT) Registers */ ++ rtclk83xx_t rtc; /* Real Time Clock Module Registers */ ++ rtclk83xx_t pit; /* Periodic Interval Timer */ ++ gtm83xx_t gtm[2]; /* Global Timers Module */ ++ ipic83xx_t ipic; /* Integrated Programmable Interrupt Controller */ ++ arbiter83xx_t arbiter; /* System Arbiter Registers */ ++ reset83xx_t reset; /* Reset Module */ ++ clk83xx_t clk; /* System Clock Module */ ++ pmc83xx_t pmc; /* Power Management Control Module */ ++ gpio83xx_t gpio[2]; /* General purpose I/O module */ ++ u8 res0[0x200]; ++ u8 dll_ddr[0x100]; ++ u8 dll_lbc[0x100]; ++ u8 res1[0xE00]; ++ ddr83xx_t ddr; /* DDR Memory Controller Memory */ ++ fsl_i2c_t i2c[2]; /* I2C Controllers */ ++ u8 res2[0x1300]; ++ duart83xx_t duart[2]; /* DUART */ ++ u8 res3[0x900]; ++ lbus83xx_t lbus; /* Local Bus Controller Registers */ ++ u8 res4[0x1000]; ++ spi83xx_t spi; /* Serial Peripheral Interface */ ++ dma83xx_t dma; /* DMA */ ++ pciconf83xx_t pci_conf[2]; /* PCI Software Configuration Registers */ ++ ios83xx_t ios; /* Sequencer */ ++ pcictrl83xx_t pci_ctrl[2]; /* PCI Controller Control and Status Registers */ ++ u8 res5[0x19900]; ++ usb83xx_t usb; ++ tsec83xx_t tsec[2]; ++ u8 res6[0xA000]; ++ security83xx_t security; ++ u8 res7[0xC0000]; ++} immap_t; + ++#elif defined(CONFIG_MPC8360) + typedef struct immap { +- sysconf83xx_t sysconf; /* System configuration */ +- wdt83xx_t wdt; /* Watch Dog Timer (WDT) Registers */ +- rtclk83xx_t rtc; /* Real Time Clock Module Registers */ +- rtclk83xx_t pit; /* Periodic Interval Timer */ +- gtm83xx_t gtm[2]; /* Global Timers Module */ +- ipic83xx_t ipic; /* Integrated Programmable Interrupt Controller */ +- arbiter83xx_t arbiter; /* System Arbiter Registers */ +- reset83xx_t reset; /* Reset Module */ +- clk83xx_t clk; /* System Clock Module */ +- pmc83xx_t pmc; /* Power Management Control Module */ +-#if defined (CONFIG_MPC8349) +- gpio83xx_t pgio[2]; /* general purpose I/O module */ +-#elif defined (CONFIG_MPC8360) +- qepi83xx_t qepi; /* QE Ports Interrupts Registers */ +-#endif +- u8 res0[0x200]; +-#if defined (CONFIG_MPC8360) +- u8 DLL_LBDDR[0x100]; +-#endif +- u8 DDL_DDR[0x100]; +- u8 DDL_LBIU[0x100]; +-#if defined (CONFIG_MPC8349) +- u8 res1[0xE00]; +-#elif defined (CONFIG_MPC8360) +- u8 res1[0x200]; +- gpio83xx_t gpio; /* General purpose I/O module */ +- qesba83xx_t qesba; /* QE Secondary Bus Access Windows */ +-#endif +- ddr83xx_t ddr; /* DDR Memory Controller Memory */ +- fsl_i2c_t i2c[2]; /* I2C Controllers */ +- u8 res2[0x1300]; +- duart83xx_t duart[2]; /* DUART */ +-#if defined (CONFIG_MPC8349) +- u8 res3[0x900]; +- lbus83xx_t lbus; /* Local Bus Controller Registers */ +- u8 res4[0x1000]; +- spi83xx_t spi; /* Serial Peripheral Interface */ +- u8 res5[0xF00]; +-#elif defined (CONFIG_MPC8360) +- u8 res3[0x900]; +- lbus83xx_t lbus; /* Local Bus Controller */ +- u8 res4[0x2000]; +-#endif +- dma83xx_t dma; /* DMA */ +-#if defined (CONFIG_MPC8349) +- pciconf83xx_t pci_conf[2]; /* PCI Software Configuration Registers */ +- ios83xx_t ios; /* Sequencer */ +- pcictrl83xx_t pci_ctrl[2]; /* PCI Controller Control and Status Registers */ +- u8 res6[0x19900]; +- usb83xx_t usb; +- tsec83xx_t tsec[2]; +- u8 res7[0xA000]; +- security83xx_t security; +-#elif defined (CONFIG_MPC8360) +- pciconf83xx_t pci_conf[1]; /* PCI Software Configuration Registers */ +- u8 res_5[128]; +- ios83xx_t ios; /* Sequencer (IOS) */ +- pcictrl83xx_t pci_ctrl[1]; /* PCI Controller Control and Status Registers */ +- u8 res6[0x4A00]; +- ddr83xx_t ddr_secondary; /* Secondary DDR Memory Controller Memory Map */ +- u8 res7[0x22000]; +- security83xx_t security; +- u8 res8[0xC0000]; +- iram83xx_t iram; /* IRAM */ +- irq83xx_t irq; /* Interrupt Controller */ +- cp83xx_t cp; /* Communications Processor */ +- qmx83xx_t qmx; /* QE Multiplexer */ +- qet83xx_t qet; /* QE Timers */ +- spi83xx_t spi[0x2]; /* spi */ +- mcc83xx_t mcc; /* mcc */ +- brg83xx_t brg; /* brg */ +- usb83xx_t usb; /* USB */ +- si1_83xx_t si1; /* SI */ +- u8 res9[0x800]; +- sir83xx_t sir; /* SI Routing Tables */ +- ucc83xx_t ucc1; /* ucc1 */ +- ucc83xx_t ucc3; /* ucc3 */ +- ucc83xx_t ucc5; /* ucc5 */ +- ucc83xx_t ucc7; /* ucc7 */ +- u8 res10[0x600]; +- upc83xx_t upc1; /* MultiPHY UTOPIA POS Controller 1 */ +- ucc83xx_t ucc2; /* ucc2 */ +- ucc83xx_t ucc4; /* ucc4 */ +- ucc83xx_t ucc6; /* ucc6 */ +- ucc83xx_t ucc8; /* ucc8 */ +- u8 res11[0x600]; +- upc83xx_t upc2; /* MultiPHY UTOPIA POS Controller 2 */ +- sdma83xx_t sdma; /* SDMA */ +- dbg83xx_t dbg; /* Debug Space */ +- rsp83xx_t rsp[0x2]; /* RISC Special Registers (Trap and Breakpoint) */ +- u8 res12[0x300]; +- u8 res13[0x3A00]; +- u8 res14[0x8000]; /* 0x108000 - 0x110000 */ +- u8 res15[0xC000]; /* 0x110000 - 0x11C000 Multi-user RAM */ +- u8 res16[0x24000]; /* 0x11C000 - 0x140000 */ +- u8 res17[0xC0000]; /* 0x140000 - 0x200000 */ +-#endif ++ sysconf83xx_t sysconf; /* System configuration */ ++ wdt83xx_t wdt; /* Watch Dog Timer (WDT) Registers */ ++ rtclk83xx_t rtc; /* Real Time Clock Module Registers */ ++ rtclk83xx_t pit; /* Periodic Interval Timer */ ++ u8 res0[0x200]; ++ ipic83xx_t ipic; /* Integrated Programmable Interrupt Controller */ ++ arbiter83xx_t arbiter; /* System Arbiter Registers */ ++ reset83xx_t reset; /* Reset Module */ ++ clk83xx_t clk; /* System Clock Module */ ++ pmc83xx_t pmc; /* Power Management Control Module */ ++ qepi83xx_t qepi; /* QE Ports Interrupts Registers */ ++ u8 res1[0x300]; ++ u8 dll_ddr[0x100]; ++ u8 dll_lbc[0x100]; ++ u8 res2[0x200]; ++ qepio83xx_t qepio; /* QE Parallel I/O ports */ ++ qesba83xx_t qesba; /* QE Secondary Bus Access Windows */ ++ u8 res3[0x400]; ++ ddr83xx_t ddr; /* DDR Memory Controller Memory */ ++ fsl_i2c_t i2c[2]; /* I2C Controllers */ ++ u8 res4[0x1300]; ++ duart83xx_t duart[2]; /* DUART */ ++ u8 res5[0x900]; ++ lbus83xx_t lbus; /* Local Bus Controller Registers */ ++ u8 res6[0x2000]; ++ dma83xx_t dma; /* DMA */ ++ pciconf83xx_t pci_conf[1]; /* PCI Software Configuration Registers */ ++ u8 res7[128]; ++ ios83xx_t ios; /* Sequencer (IOS) */ ++ pcictrl83xx_t pci_ctrl[1]; /* PCI Controller Control and Status Registers */ ++ u8 res8[0x4A00]; ++ ddr83xx_t ddr_secondary; /* Secondary DDR Memory Controller Memory Map */ ++ u8 res9[0x22000]; ++ security83xx_t security; ++ u8 res10[0xC0000]; ++ u8 qe[0x100000]; /* QE block */ + } immap_t; ++#endif + + #endif /* __IMMAP_83xx__ */ +diff --git a/include/mpc83xx.h b/include/mpc83xx.h +index 03dd0ca..504b6a9 100644 +--- a/include/mpc83xx.h ++++ b/include/mpc83xx.h +@@ -10,12 +10,6 @@ + * the License, or (at your option) any later version. + */ + +-/* +- * mpc83xx.h +- * +- * MPC83xx specific definitions +- */ +- + #ifndef __MPC83XX_H__ + #define __MPC83XX_H__ + +@@ -24,406 +18,941 @@ + #include <asm/e300.h> + #endif + +-/* +- * MPC83xx cpu provide RCR register to do reset thing specially. easier +- * to implement ++/* MPC83xx cpu provide RCR register to do reset thing specially + */ +- + #define MPC83xx_RESET + +-/* +- * System reset offset (PowerPC standard) ++/* System reset offset (PowerPC standard) + */ +-#define EXC_OFF_SYS_RESET 0x0100 ++#define EXC_OFF_SYS_RESET 0x0100 + +-/* +- * Default Internal Memory Register Space (Freescale recomandation) ++/* IMMRBAR - Internal Memory Register Base Address + */ +-#define CONFIG_DEFAULT_IMMR 0xFF400000 ++#define CONFIG_DEFAULT_IMMR 0xFF400000 /* Default IMMR base address */ ++#define IMMRBAR 0x0000 /* Register offset to immr */ ++#define IMMRBAR_BASE_ADDR 0xFFF00000 /* Base address mask */ ++#define IMMRBAR_RES ~(IMMRBAR_BASE_ADDR) + +-/* +- * Watchdog ++/* LAWBAR - Local Access Window Base Address Register + */ +-#define SWCRR 0x0204 +-#define SWCRR_SWTC 0xFFFF0000 /* Software Watchdog Time Count. */ +-#define SWCRR_SWEN 0x00000004 /* Watchdog Enable bit. */ +-#define SWCRR_SWRI 0x00000002 /* Software Watchdog Reset/Interrupt Select bit. */ +-#define SWCRR_SWPR 0x00000001 /* Software Watchdog Counter Prescale bit. */ +-#define SWCRR_RES ~(SWCRR_SWTC | SWCRR_SWEN | SWCRR_SWRI | SWCRR_SWPR) ++#define LBLAWBAR0 0x0020 /* Register offset to immr */ ++#define LBLAWAR0 0x0024 ++#define LBLAWBAR1 0x0028 ++#define LBLAWAR1 0x002C ++#define LBLAWBAR2 0x0030 ++#define LBLAWAR2 0x0034 ++#define LBLAWBAR3 0x0038 ++#define LBLAWAR3 0x003C ++#define LAWBAR_BAR 0xFFFFF000 /* Base address mask */ ++ ++/* SPRIDR - System Part and Revision ID Register ++ */ ++#define SPRIDR_PARTID 0xFFFF0000 /* Part Identification */ ++#define SPRIDR_REVID 0x0000FFFF /* Revision Identification */ ++ ++#define SPR_8349E_REV10 0x80300100 ++#define SPR_8349_REV10 0x80310100 ++#define SPR_8347E_REV10_TBGA 0x80320100 ++#define SPR_8347_REV10_TBGA 0x80330100 ++#define SPR_8347E_REV10_PBGA 0x80340100 ++#define SPR_8347_REV10_PBGA 0x80350100 ++#define SPR_8343E_REV10 0x80360100 ++#define SPR_8343_REV10 0x80370100 ++ ++#define SPR_8349E_REV11 0x80300101 ++#define SPR_8349_REV11 0x80310101 ++#define SPR_8347E_REV11_TBGA 0x80320101 ++#define SPR_8347_REV11_TBGA 0x80330101 ++#define SPR_8347E_REV11_PBGA 0x80340101 ++#define SPR_8347_REV11_PBGA 0x80350101 ++#define SPR_8343E_REV11 0x80360101 ++#define SPR_8343_REV11 0x80370101 ++ ++#define SPR_8360E_REV10 0x80480010 ++#define SPR_8360_REV10 0x80490010 ++#define SPR_8360E_REV11 0x80480011 ++#define SPR_8360_REV11 0x80490011 ++#define SPR_8360E_REV12 0x80480012 ++#define SPR_8360_REV12 0x80490012 ++ ++/* SPCR - System Priority Configuration Register ++ */ ++#define SPCR_PCIHPE 0x10000000 /* PCI Highest Priority Enable */ ++#define SPCR_PCIHPE_SHIFT (31-3) ++#define SPCR_PCIPR 0x03000000 /* PCI bridge system bus request priority */ ++#define SPCR_PCIPR_SHIFT (31-7) ++#define SPCR_OPT 0x00800000 /* Optimize */ ++#define SPCR_TBEN 0x00400000 /* E300 PowerPC core time base unit enable */ ++#define SPCR_TBEN_SHIFT (31-9) ++#define SPCR_COREPR 0x00300000 /* E300 PowerPC Core system bus request priority */ ++#define SPCR_COREPR_SHIFT (31-11) ++ ++#if defined(CONFIG_MPC8349) ++/* SPCR bits - MPC8349 specific */ ++#define SPCR_TSEC1DP 0x00003000 /* TSEC1 data priority */ ++#define SPCR_TSEC1DP_SHIFT (31-19) ++#define SPCR_TSEC1BDP 0x00000C00 /* TSEC1 buffer descriptor priority */ ++#define SPCR_TSEC1BDP_SHIFT (31-21) ++#define SPCR_TSEC1EP 0x00000300 /* TSEC1 emergency priority */ ++#define SPCR_TSEC1EP_SHIFT (31-23) ++#define SPCR_TSEC2DP 0x00000030 /* TSEC2 data priority */ ++#define SPCR_TSEC2DP_SHIFT (31-27) ++#define SPCR_TSEC2BDP 0x0000000C /* TSEC2 buffer descriptor priority */ ++#define SPCR_TSEC2BDP_SHIFT (31-29) ++#define SPCR_TSEC2EP 0x00000003 /* TSEC2 emergency priority */ ++#define SPCR_TSEC2EP_SHIFT (31-31) ++#endif + +-#define SWCNR 0x0208 +-#define SWCNR_SWCN 0x0000FFFF Software Watchdog Count Field. +-#define SWCNR_RES ~(SWCNR_SWCN) ++/* SICRL/H - System I/O Configuration Register Low/High ++ */ ++#if defined(CONFIG_MPC8349) ++/* SICRL bits - MPC8349 specific */ ++#define SICRL_LDP_A 0x80000000 ++#define SICRL_USB1 0x40000000 ++#define SICRL_USB0 0x20000000 ++#define SICRL_UART 0x0C000000 ++#define SICRL_GPIO1_A 0x02000000 ++#define SICRL_GPIO1_B 0x01000000 ++#define SICRL_GPIO1_C 0x00800000 ++#define SICRL_GPIO1_D 0x00400000 ++#define SICRL_GPIO1_E 0x00200000 ++#define SICRL_GPIO1_F 0x00180000 ++#define SICRL_GPIO1_G 0x00040000 ++#define SICRL_GPIO1_H 0x00020000 ++#define SICRL_GPIO1_I 0x00010000 ++#define SICRL_GPIO1_J 0x00008000 ++#define SICRL_GPIO1_K 0x00004000 ++#define SICRL_GPIO1_L 0x00003000 ++ ++/* SICRH bits - MPC8349 specific */ ++#define SICRH_DDR 0x80000000 ++#define SICRH_TSEC1_A 0x10000000 ++#define SICRH_TSEC1_B 0x08000000 ++#define SICRH_TSEC1_C 0x04000000 ++#define SICRH_TSEC1_D 0x02000000 ++#define SICRH_TSEC1_E 0x01000000 ++#define SICRH_TSEC1_F 0x00800000 ++#define SICRH_TSEC2_A 0x00400000 ++#define SICRH_TSEC2_B 0x00200000 ++#define SICRH_TSEC2_C 0x00100000 ++#define SICRH_TSEC2_D 0x00080000 ++#define SICRH_TSEC2_E 0x00040000 ++#define SICRH_TSEC2_F 0x00020000 ++#define SICRH_TSEC2_G 0x00010000 ++#define SICRH_TSEC2_H 0x00008000 ++#define SICRH_GPIO2_A 0x00004000 ++#define SICRH_GPIO2_B 0x00002000 ++#define SICRH_GPIO2_C 0x00001000 ++#define SICRH_GPIO2_D 0x00000800 ++#define SICRH_GPIO2_E 0x00000400 ++#define SICRH_GPIO2_F 0x00000200 ++#define SICRH_GPIO2_G 0x00000180 ++#define SICRH_GPIO2_H 0x00000060 ++#define SICRH_TSOBI1 0x00000002 ++#define SICRH_TSOBI2 0x00000001 ++ ++#elif defined(CONFIG_MPC8360) ++/* SICRL bits - MPC8360 specific */ ++#define SICRL_LDP_A 0xC0000000 ++#define SICRL_LCLK_1 0x10000000 ++#define SICRL_LCLK_2 0x08000000 ++#define SICRL_SRCID_A 0x03000000 ++#define SICRL_IRQ_CKSTP_A 0x00C00000 ++ ++/* SICRH bits - MPC8360 specific */ ++#define SICRH_DDR 0x80000000 ++#define SICRH_SECONDARY_DDR 0x40000000 ++#define SICRH_SDDROE 0x20000000 ++#define SICRH_IRQ3 0x10000000 ++#define SICRH_UC1EOBI 0x00000004 ++#define SICRH_UC2E1OBI 0x00000002 ++#define SICRH_UC2E2OBI 0x00000001 ++#endif + +-#define SWSRR 0x020E ++/* SWCRR - System Watchdog Control Register ++ */ ++#define SWCRR 0x0204 /* Register offset to immr */ ++#define SWCRR_SWTC 0xFFFF0000 /* Software Watchdog Time Count */ ++#define SWCRR_SWEN 0x00000004 /* Watchdog Enable bit */ ++#define SWCRR_SWRI 0x00000002 /* Software Watchdog Reset/Interrupt Select bit */ ++#define SWCRR_SWPR 0x00000001 /* Software Watchdog Counter Prescale bit */ ++#define SWCRR_RES ~(SWCRR_SWTC | SWCRR_SWEN | SWCRR_SWRI | SWCRR_SWPR) ++ ++/* SWCNR - System Watchdog Counter Register ++ */ ++#define SWCNR 0x0208 /* Register offset to immr */ ++#define SWCNR_SWCN 0x0000FFFF /* Software Watchdog Count mask */ ++#define SWCNR_RES ~(SWCNR_SWCN) + +-/* +- * Default Internal Memory Register Space (Freescale recomandation) ++/* SWSRR - System Watchdog Service Register + */ +-#define IMMRBAR 0x0000 +-#define IMMRBAR_BASE_ADDR 0xFFF00000 /* Identifies the 12 most-significant address bits of the base of the 1 MByte internal memory window. */ +-#define IMMRBAR_RES ~(IMMRBAR_BASE_ADDR) ++#define SWSRR 0x020E /* Register offset to immr */ + +-/* +- * Default Internal Memory Register Space (Freescale recomandation) ++/* ACR - Arbiter Configuration Register + */ +-#define LBLAWBAR0 0x0020 +-#define LBLAWAR0 0x0024 +-#define LBLAWBAR1 0x0028 +-#define LBLAWAR1 0x002C +-#define LBLAWBAR2 0x0030 +-#define LBLAWAR2 0x0034 +-#define LBLAWBAR3 0x0038 +-#define LBLAWAR3 0x003C ++#define ACR_COREDIS 0x10000000 /* Core disable */ ++#define ACR_COREDIS_SHIFT (31-7) ++#define ACR_PIPE_DEP 0x00070000 /* Pipeline depth */ ++#define ACR_PIPE_DEP_SHIFT (31-15) ++#define ACR_PCI_RPTCNT 0x00007000 /* PCI repeat count */ ++#define ACR_PCI_RPTCNT_SHIFT (31-19) ++#define ACR_RPTCNT 0x00000700 /* Repeat count */ ++#define ACR_RPTCNT_SHIFT (31-23) ++#define ACR_APARK 0x00000030 /* Address parking */ ++#define ACR_APARK_SHIFT (31-27) ++#define ACR_PARKM 0x0000000F /* Parking master */ ++#define ACR_PARKM_SHIFT (31-31) ++ ++/* ATR - Arbiter Timers Register ++ */ ++#define ATR_DTO 0x00FF0000 /* Data time out */ ++#define ATR_ATO 0x000000FF /* Address time out */ + +-/* +- * The device ID and revision numbers +- */ +-#define SPR_8349E_REV10 0x80300100 +-#define SPR_8349_REV10 0x80310100 +-#define SPR_8347E_REV10_TBGA 0x80320100 +-#define SPR_8347_REV10_TBGA 0x80330100 +-#define SPR_8347E_REV10_PBGA 0x80340100 +-#define SPR_8347_REV10_PBGA 0x80350100 +-#define SPR_8343E_REV10 0x80360100 +-#define SPR_8343_REV10 0x80370100 +- +-#define SPR_8349E_REV11 0x80300101 +-#define SPR_8349_REV11 0x80310101 +-#define SPR_8347E_REV11_TBGA 0x80320101 +-#define SPR_8347_REV11_TBGA 0x80330101 +-#define SPR_8347E_REV11_PBGA 0x80340101 +-#define SPR_8347_REV11_PBGA 0x80350101 +-#define SPR_8343E_REV11 0x80360101 +-#define SPR_8343_REV11 0x80370101 +- +-#define SPR_8360E_REV10 0x80480010 +-#define SPR_8360_REV10 0x80490010 +-#define SPR_8360E_REV11 0x80480011 +-#define SPR_8360_REV11 0x80490011 +-#define SPR_8360E_REV12 0x80480012 +-#define SPR_8360_REV12 0x80490012 ++/* AER - Arbiter Event Register ++ */ ++#define AER_ETEA 0x00000020 /* Transfer error */ ++#define AER_RES 0x00000010 /* Reserved transfer type */ ++#define AER_ECW 0x00000008 /* External control word transfer type */ ++#define AER_AO 0x00000004 /* Address Only transfer type */ ++#define AER_DTO 0x00000002 /* Data time out */ ++#define AER_ATO 0x00000001 /* Address time out */ ++ ++/* AEATR - Arbiter Event Address Register ++ */ ++#define AEATR_EVENT 0x07000000 /* Event type */ ++#define AEATR_MSTR_ID 0x001F0000 /* Master Id */ ++#define AEATR_TBST 0x00000800 /* Transfer burst */ ++#define AEATR_TSIZE 0x00000700 /* Transfer Size */ ++#define AEATR_TTYPE 0x0000001F /* Transfer Type */ + +-/* +- * Base Registers & Option Registers +- */ +-#define BR0 0x5000 +-#define BR1 0x5008 +-#define BR2 0x5010 +-#define BR3 0x5018 +-#define BR4 0x5020 +-#define BR5 0x5028 +-#define BR6 0x5030 +-#define BR7 0x5038 +- +-#define BR_BA 0xFFFF8000 +-#define BR_BA_SHIFT 15 +-#define BR_PS 0x00001800 +-#define BR_PS_SHIFT 11 +-#define BR_PS_8 0x00000800 /* Port Size 8 bit */ +-#define BR_PS_16 0x00001000 /* Port Size 16 bit */ +-#define BR_PS_32 0x00001800 /* Port Size 32 bit */ +-#define BR_DECC 0x00000600 +-#define BR_DECC_SHIFT 9 +-#define BR_WP 0x00000100 +-#define BR_WP_SHIFT 8 +-#define BR_MSEL 0x000000E0 +-#define BR_MSEL_SHIFT 5 +-#define BR_MS_GPCM 0x00000000 /* GPCM */ +-#define BR_MS_SDRAM 0x00000060 /* SDRAM */ +-#define BR_MS_UPMA 0x00000080 /* UPMA */ +-#define BR_MS_UPMB 0x000000A0 /* UPMB */ +-#define BR_MS_UPMC 0x000000C0 /* UPMC */ +-#if defined (CONFIG_MPC8360) +-#define BR_ATOM 0x0000000C +-#define BR_ATOM_SHIFT 2 +-#endif +-#define BR_V 0x00000001 +-#define BR_V_SHIFT 0 +-#if defined (CONFIG_MPC8349) +-#define BR_RES ~(BR_BA|BR_PS|BR_DECC|BR_WP|BR_MSEL|BR_V) +-#elif defined (CONFIG_MPC8360) +-#define BR_RES ~(BR_BA|BR_PS|BR_DECC|BR_WP|BR_MSEL|BR_ATOM|BR_V) ++/* HRCWL - Hard Reset Configuration Word Low ++ */ ++#define HRCWL_LBIUCM 0x80000000 ++#define HRCWL_LBIUCM_SHIFT 31 ++#define HRCWL_LCL_BUS_TO_SCB_CLK_1X1 0x00000000 ++#define HRCWL_LCL_BUS_TO_SCB_CLK_2X1 0x80000000 ++ ++#define HRCWL_DDRCM 0x40000000 ++#define HRCWL_DDRCM_SHIFT 30 ++#define HRCWL_DDR_TO_SCB_CLK_1X1 0x00000000 ++#define HRCWL_DDR_TO_SCB_CLK_2X1 0x40000000 ++ ++#define HRCWL_SPMF 0x0f000000 ++#define HRCWL_SPMF_SHIFT 24 ++#define HRCWL_CSB_TO_CLKIN_16X1 0x00000000 ++#define HRCWL_CSB_TO_CLKIN_1X1 0x01000000 ++#define HRCWL_CSB_TO_CLKIN_2X1 0x02000000 ++#define HRCWL_CSB_TO_CLKIN_3X1 0x03000000 ++#define HRCWL_CSB_TO_CLKIN_4X1 0x04000000 ++#define HRCWL_CSB_TO_CLKIN_5X1 0x05000000 ++#define HRCWL_CSB_TO_CLKIN_6X1 0x06000000 ++#define HRCWL_CSB_TO_CLKIN_7X1 0x07000000 ++#define HRCWL_CSB_TO_CLKIN_8X1 0x08000000 ++#define HRCWL_CSB_TO_CLKIN_9X1 0x09000000 ++#define HRCWL_CSB_TO_CLKIN_10X1 0x0A000000 ++#define HRCWL_CSB_TO_CLKIN_11X1 0x0B000000 ++#define HRCWL_CSB_TO_CLKIN_12X1 0x0C000000 ++#define HRCWL_CSB_TO_CLKIN_13X1 0x0D000000 ++#define HRCWL_CSB_TO_CLKIN_14X1 0x0E000000 ++#define HRCWL_CSB_TO_CLKIN_15X1 0x0F000000 ++ ++#define HRCWL_VCO_BYPASS 0x00000000 ++#define HRCWL_VCO_1X2 0x00000000 ++#define HRCWL_VCO_1X4 0x00200000 ++#define HRCWL_VCO_1X8 0x00400000 ++ ++#define HRCWL_COREPLL 0x007F0000 ++#define HRCWL_COREPLL_SHIFT 16 ++#define HRCWL_CORE_TO_CSB_BYPASS 0x00000000 ++#define HRCWL_CORE_TO_CSB_1X1 0x00020000 ++#define HRCWL_CORE_TO_CSB_1_5X1 0x00030000 ++#define HRCWL_CORE_TO_CSB_2X1 0x00040000 ++#define HRCWL_CORE_TO_CSB_2_5X1 0x00050000 ++#define HRCWL_CORE_TO_CSB_3X1 0x00060000 ++ ++#if defined(CONFIG_MPC8360) ++#define HRCWL_CEVCOD 0x000000C0 ++#define HRCWL_CEVCOD_SHIFT 6 ++#define HRCWL_CE_PLL_VCO_DIV_4 0x00000000 ++#define HRCWL_CE_PLL_VCO_DIV_8 0x00000040 ++#define HRCWL_CE_PLL_VCO_DIV_2 0x00000080 ++ ++#define HRCWL_CEPDF 0x00000020 ++#define HRCWL_CEPDF_SHIFT 5 ++#define HRCWL_CE_PLL_DIV_1X1 0x00000000 ++#define HRCWL_CE_PLL_DIV_2X1 0x00000020 ++ ++#define HRCWL_CEPMF 0x0000001F ++#define HRCWL_CEPMF_SHIFT 0 ++#define HRCWL_CE_TO_PLL_1X16_ 0x00000000 ++#define HRCWL_CE_TO_PLL_1X2 0x00000002 ++#define HRCWL_CE_TO_PLL_1X3 0x00000003 ++#define HRCWL_CE_TO_PLL_1X4 0x00000004 ++#define HRCWL_CE_TO_PLL_1X5 0x00000005 ++#define HRCWL_CE_TO_PLL_1X6 0x00000006 ++#define HRCWL_CE_TO_PLL_1X7 0x00000007 ++#define HRCWL_CE_TO_PLL_1X8 0x00000008 ++#define HRCWL_CE_TO_PLL_1X9 0x00000009 ++#define HRCWL_CE_TO_PLL_1X10 0x0000000A ++#define HRCWL_CE_TO_PLL_1X11 0x0000000B ++#define HRCWL_CE_TO_PLL_1X12 0x0000000C ++#define HRCWL_CE_TO_PLL_1X13 0x0000000D ++#define HRCWL_CE_TO_PLL_1X14 0x0000000E ++#define HRCWL_CE_TO_PLL_1X15 0x0000000F ++#define HRCWL_CE_TO_PLL_1X16 0x00000010 ++#define HRCWL_CE_TO_PLL_1X17 0x00000011 ++#define HRCWL_CE_TO_PLL_1X18 0x00000012 ++#define HRCWL_CE_TO_PLL_1X19 0x00000013 ++#define HRCWL_CE_TO_PLL_1X20 0x00000014 ++#define HRCWL_CE_TO_PLL_1X21 0x00000015 ++#define HRCWL_CE_TO_PLL_1X22 0x00000016 ++#define HRCWL_CE_TO_PLL_1X23 0x00000017 ++#define HRCWL_CE_TO_PLL_1X24 0x00000018 ++#define HRCWL_CE_TO_PLL_1X25 0x00000019 ++#define HRCWL_CE_TO_PLL_1X26 0x0000001A ++#define HRCWL_CE_TO_PLL_1X27 0x0000001B ++#define HRCWL_CE_TO_PLL_1X28 0x0000001C ++#define HRCWL_CE_TO_PLL_1X29 0x0000001D ++#define HRCWL_CE_TO_PLL_1X30 0x0000001E ++#define HRCWL_CE_TO_PLL_1X31 0x0000001F + #endif + +-#define OR0 0x5004 +-#define OR1 0x500C +-#define OR2 0x5014 +-#define OR3 0x501C +-#define OR4 0x5024 +-#define OR5 0x502C +-#define OR6 0x5034 +-#define OR7 0x503C +- +-#define OR_GPCM_AM 0xFFFF8000 +-#define OR_GPCM_AM_SHIFT 15 +-#define OR_GPCM_BCTLD 0x00001000 +-#define OR_GPCM_BCTLD_SHIFT 12 +-#define OR_GPCM_CSNT 0x00000800 +-#define OR_GPCM_CSNT_SHIFT 11 +-#define OR_GPCM_ACS 0x00000600 +-#define OR_GPCM_ACS_SHIFT 9 +-#define OR_GPCM_ACS_0b10 0x00000400 +-#define OR_GPCM_ACS_0b11 0x00000600 +-#define OR_GPCM_XACS 0x00000100 +-#define OR_GPCM_XACS_SHIFT 8 +-#define OR_GPCM_SCY 0x000000F0 +-#define OR_GPCM_SCY_SHIFT 4 +-#define OR_GPCM_SCY_1 0x00000010 +-#define OR_GPCM_SCY_2 0x00000020 +-#define OR_GPCM_SCY_3 0x00000030 +-#define OR_GPCM_SCY_4 0x00000040 +-#define OR_GPCM_SCY_5 0x00000050 +-#define OR_GPCM_SCY_6 0x00000060 +-#define OR_GPCM_SCY_7 0x00000070 +-#define OR_GPCM_SCY_8 0x00000080 +-#define OR_GPCM_SCY_9 0x00000090 +-#define OR_GPCM_SCY_10 0x000000a0 +-#define OR_GPCM_SCY_11 0x000000b0 +-#define OR_GPCM_SCY_12 0x000000c0 +-#define OR_GPCM_SCY_13 0x000000d0 +-#define OR_GPCM_SCY_14 0x000000e0 +-#define OR_GPCM_SCY_15 0x000000f0 +-#define OR_GPCM_SETA 0x00000008 +-#define OR_GPCM_SETA_SHIFT 3 +-#define OR_GPCM_TRLX 0x00000004 +-#define OR_GPCM_TRLX_SHIFT 2 +-#define OR_GPCM_EHTR 0x00000002 +-#define OR_GPCM_EHTR_SHIFT 1 +-#define OR_GPCM_EAD 0x00000001 +-#define OR_GPCM_EAD_SHIFT 0 +- +-#define OR_UPM_AM 0xFFFF8000 +-#define OR_UPM_AM_SHIFT 15 +-#define OR_UPM_XAM 0x00006000 +-#define OR_UPM_XAM_SHIFT 13 +-#define OR_UPM_BCTLD 0x00001000 +-#define OR_UPM_BCTLD_SHIFT 12 +-#define OR_UPM_BI 0x00000100 +-#define OR_UPM_BI_SHIFT 8 +-#define OR_UPM_TRLX 0x00000004 +-#define OR_UPM_TRLX_SHIFT 2 +-#define OR_UPM_EHTR 0x00000002 +-#define OR_UPM_EHTR_SHIFT 1 +-#define OR_UPM_EAD 0x00000001 +-#define OR_UPM_EAD_SHIFT 0 +- +-#define OR_SDRAM_AM 0xFFFF8000 +-#define OR_SDRAM_AM_SHIFT 15 +-#define OR_SDRAM_XAM 0x00006000 +-#define OR_SDRAM_XAM_SHIFT 13 +-#define OR_SDRAM_COLS 0x00001C00 +-#define OR_SDRAM_COLS_SHIFT 10 +-#define OR_SDRAM_ROWS 0x000001C0 +-#define OR_SDRAM_ROWS_SHIFT 6 +-#define OR_SDRAM_PMSEL 0x00000020 +-#define OR_SDRAM_PMSEL_SHIFT 5 +-#define OR_SDRAM_EAD 0x00000001 +-#define OR_SDRAM_EAD_SHIFT 0 +- +-/* +- * Hard Reset Configration Word - High ++/* HRCWH - Hardware Reset Configuration Word High + */ +-#define HRCWH_PCI_AGENT 0x00000000 +-#define HRCWH_PCI_HOST 0x80000000 ++#define HRCWH_PCI_HOST 0x80000000 ++#define HRCWH_PCI_HOST_SHIFT 31 ++#define HRCWH_PCI_AGENT 0x00000000 + +-#if defined (CONFIG_MPC8349) +-#define HRCWH_32_BIT_PCI 0x00000000 +-#define HRCWH_64_BIT_PCI 0x40000000 ++#if defined(CONFIG_MPC8349) ++#define HRCWH_32_BIT_PCI 0x00000000 ++#define HRCWH_64_BIT_PCI 0x40000000 + #endif + +-#define HRCWH_PCI1_ARBITER_DISABLE 0x00000000 +-#define HRCWH_PCI1_ARBITER_ENABLE 0x20000000 ++#define HRCWH_PCI1_ARBITER_DISABLE 0x00000000 ++#define HRCWH_PCI1_ARBITER_ENABLE 0x20000000 ++ ++#define HRCWH_PCI_ARBITER_DISABLE 0x00000000 ++#define HRCWH_PCI_ARBITER_ENABLE 0x20000000 + +-#if defined (CONFIG_MPC8349) +-#define HRCWH_PCI2_ARBITER_DISABLE 0x00000000 +-#define HRCWH_PCI2_ARBITER_ENABLE 0x10000000 +-#elif defined (CONFIG_MPC8360) +-#define HRCWH_PCICKDRV_DISABLE 0x00000000 +-#define HRCWH_PCICKDRV_ENABLE 0x10000000 ++#if defined(CONFIG_MPC8349) ++#define HRCWH_PCI2_ARBITER_DISABLE 0x00000000 ++#define HRCWH_PCI2_ARBITER_ENABLE 0x10000000 ++ ++#elif defined(CONFIG_MPC8360) ++#define HRCWH_PCICKDRV_DISABLE 0x00000000 ++#define HRCWH_PCICKDRV_ENABLE 0x10000000 + #endif + +-#define HRCWH_CORE_DISABLE 0x08000000 +-#define HRCWH_CORE_ENABLE 0x00000000 ++#define HRCWH_CORE_DISABLE 0x08000000 ++#define HRCWH_CORE_ENABLE 0x00000000 + +-#define HRCWH_FROM_0X00000100 0x00000000 +-#define HRCWH_FROM_0XFFF00100 0x04000000 ++#define HRCWH_FROM_0X00000100 0x00000000 ++#define HRCWH_FROM_0XFFF00100 0x04000000 + +-#define HRCWH_BOOTSEQ_DISABLE 0x00000000 +-#define HRCWH_BOOTSEQ_NORMAL 0x01000000 +-#define HRCWH_BOOTSEQ_EXTENDED 0x02000000 ++#define HRCWH_BOOTSEQ_DISABLE 0x00000000 ++#define HRCWH_BOOTSEQ_NORMAL 0x01000000 ++#define HRCWH_BOOTSEQ_EXTENDED 0x02000000 + +-#define HRCWH_SW_WATCHDOG_DISABLE 0x00000000 +-#define HRCWH_SW_WATCHDOG_ENABLE 0x00800000 ++#define HRCWH_SW_WATCHDOG_DISABLE 0x00000000 ++#define HRCWH_SW_WATCHDOG_ENABLE 0x00800000 + +-#define HRCWH_ROM_LOC_DDR_SDRAM 0x00000000 +-#define HRCWH_ROM_LOC_PCI1 0x00100000 +-#if defined (CONFIG_MPC8349) +-#define HRCWH_ROM_LOC_PCI2 0x00200000 ++#define HRCWH_ROM_LOC_DDR_SDRAM 0x00000000 ++#define HRCWH_ROM_LOC_PCI1 0x00100000 ++#if defined(CONFIG_MPC8349) ++#define HRCWH_ROM_LOC_PCI2 0x00200000 + #endif +-#define HRCWH_ROM_LOC_LOCAL_8BIT 0x00500000 +-#define HRCWH_ROM_LOC_LOCAL_16BIT 0x00600000 +-#define HRCWH_ROM_LOC_LOCAL_32BIT 0x00700000 +- +-#if defined (CONFIG_MPC8349) +-#define HRCWH_TSEC1M_IN_RGMII 0x00000000 +-#define HRCWH_TSEC1M_IN_RTBI 0x00004000 +-#define HRCWH_TSEC1M_IN_GMII 0x00008000 +-#define HRCWH_TSEC1M_IN_TBI 0x0000C000 +- +-#define HRCWH_TSEC2M_IN_RGMII 0x00000000 +-#define HRCWH_TSEC2M_IN_RTBI 0x00001000 +-#define HRCWH_TSEC2M_IN_GMII 0x00002000 +-#define HRCWH_TSEC2M_IN_TBI 0x00003000 ++#define HRCWH_ROM_LOC_LOCAL_8BIT 0x00500000 ++#define HRCWH_ROM_LOC_LOCAL_16BIT 0x00600000 ++#define HRCWH_ROM_LOC_LOCAL_32BIT 0x00700000 ++ ++#if defined(CONFIG_MPC8349) ++#define HRCWH_TSEC1M_IN_RGMII 0x00000000 ++#define HRCWH_TSEC1M_IN_RTBI 0x00004000 ++#define HRCWH_TSEC1M_IN_GMII 0x00008000 ++#define HRCWH_TSEC1M_IN_TBI 0x0000C000 ++#define HRCWH_TSEC2M_IN_RGMII 0x00000000 ++#define HRCWH_TSEC2M_IN_RTBI 0x00001000 ++#define HRCWH_TSEC2M_IN_GMII 0x00002000 ++#define HRCWH_TSEC2M_IN_TBI 0x00003000 + #endif + +-#if defined (CONFIG_MPC8360) +-#define HRCWH_SECONDARY_DDR_DISABLE 0x00000000 +-#define HRCWH_SECONDARY_DDR_ENABLE 0x00000010 ++#if defined(CONFIG_MPC8360) ++#define HRCWH_SECONDARY_DDR_DISABLE 0x00000000 ++#define HRCWH_SECONDARY_DDR_ENABLE 0x00000010 + #endif + +-#define HRCWH_BIG_ENDIAN 0x00000000 +-#define HRCWH_LITTLE_ENDIAN 0x00000008 ++#define HRCWH_BIG_ENDIAN 0x00000000 ++#define HRCWH_LITTLE_ENDIAN 0x00000008 + +-#define HRCWH_LALE_NORMAL 0x00000000 +-#define HRCWH_LALE_EARLY 0x00000004 ++#define HRCWH_LALE_NORMAL 0x00000000 ++#define HRCWH_LALE_EARLY 0x00000004 + +-#define HRCWH_LDP_SET 0x00000000 +-#define HRCWH_LDP_CLEAR 0x00000002 ++#define HRCWH_LDP_SET 0x00000000 ++#define HRCWH_LDP_CLEAR 0x00000002 + +-/* +- * Hard Reset Configration Word - Low +- */ +-#define HRCWL_LCL_BUS_TO_SCB_CLK_1X1 0x00000000 +-#define HRCWL_LCL_BUS_TO_SCB_CLK_2X1 0x80000000 +- +-#define HRCWL_DDR_TO_SCB_CLK_1X1 0x00000000 +-#define HRCWL_DDR_TO_SCB_CLK_2X1 0x40000000 +- +-#define HRCWL_CSB_TO_CLKIN_16X1 0x00000000 +-#define HRCWL_CSB_TO_CLKIN_1X1 0x01000000 +-#define HRCWL_CSB_TO_CLKIN_2X1 0x02000000 +-#define HRCWL_CSB_TO_CLKIN_3X1 0x03000000 +-#define HRCWL_CSB_TO_CLKIN_4X1 0x04000000 +-#define HRCWL_CSB_TO_CLKIN_5X1 0x05000000 +-#define HRCWL_CSB_TO_CLKIN_6X1 0x06000000 +-#define HRCWL_CSB_TO_CLKIN_7X1 0x07000000 +-#define HRCWL_CSB_TO_CLKIN_8X1 0x08000000 +-#define HRCWL_CSB_TO_CLKIN_9X1 0x09000000 +-#define HRCWL_CSB_TO_CLKIN_10X1 0x0A000000 +-#define HRCWL_CSB_TO_CLKIN_11X1 0x0B000000 +-#define HRCWL_CSB_TO_CLKIN_12X1 0x0C000000 +-#define HRCWL_CSB_TO_CLKIN_13X1 0x0D000000 +-#define HRCWL_CSB_TO_CLKIN_14X1 0x0E000000 +-#define HRCWL_CSB_TO_CLKIN_15X1 0x0F000000 +- +-#define HRCWL_VCO_BYPASS 0x00000000 +-#define HRCWL_VCO_1X2 0x00000000 +-#define HRCWL_VCO_1X4 0x00200000 +-#define HRCWL_VCO_1X8 0x00400000 +- +-#define HRCWL_CORE_TO_CSB_BYPASS 0x00000000 +-#define HRCWL_CORE_TO_CSB_1X1 0x00020000 +-#define HRCWL_CORE_TO_CSB_1_5X1 0x00030000 +-#define HRCWL_CORE_TO_CSB_2X1 0x00040000 +-#define HRCWL_CORE_TO_CSB_2_5X1 0x00050000 +-#define HRCWL_CORE_TO_CSB_3X1 0x00060000 +- +-#if defined (CONFIG_MPC8360) +-#define HRCWL_CE_PLL_VCO_DIV_4 0x00000000 +-#define HRCWL_CE_PLL_VCO_DIV_8 0x00000040 +-#define HRCWL_CE_PLL_VCO_DIV_2 0x00000080 +- +-#define HRCWL_CE_PLL_DIV_1X1 0x00000000 +-#define HRCWL_CE_PLL_DIV_2X1 0x00000020 +- +-#define HRCWL_CE_TO_PLL_1X16_ 0x00000000 +-#define HRCWL_CE_TO_PLL_1X2 0x00000002 +-#define HRCWL_CE_TO_PLL_1X3 0x00000003 +-#define HRCWL_CE_TO_PLL_1X4 0x00000004 +-#define HRCWL_CE_TO_PLL_1X5 0x00000005 +-#define HRCWL_CE_TO_PLL_1X6 0x00000006 +-#define HRCWL_CE_TO_PLL_1X7 0x00000007 +-#define HRCWL_CE_TO_PLL_1X8 0x00000008 +-#define HRCWL_CE_TO_PLL_1X9 0x00000009 +-#define HRCWL_CE_TO_PLL_1X10 0x0000000A +-#define HRCWL_CE_TO_PLL_1X11 0x0000000B +-#define HRCWL_CE_TO_PLL_1X12 0x0000000C +-#define HRCWL_CE_TO_PLL_1X13 0x0000000D +-#define HRCWL_CE_TO_PLL_1X14 0x0000000E +-#define HRCWL_CE_TO_PLL_1X15 0x0000000F +-#define HRCWL_CE_TO_PLL_1X16 0x00000010 +-#define HRCWL_CE_TO_PLL_1X17 0x00000011 +-#define HRCWL_CE_TO_PLL_1X18 0x00000012 +-#define HRCWL_CE_TO_PLL_1X19 0x00000013 +-#define HRCWL_CE_TO_PLL_1X20 0x00000014 +-#define HRCWL_CE_TO_PLL_1X21 0x00000015 +-#define HRCWL_CE_TO_PLL_1X22 0x00000016 +-#define HRCWL_CE_TO_PLL_1X23 0x00000017 +-#define HRCWL_CE_TO_PLL_1X24 0x00000018 +-#define HRCWL_CE_TO_PLL_1X25 0x00000019 +-#define HRCWL_CE_TO_PLL_1X26 0x0000001A +-#define HRCWL_CE_TO_PLL_1X27 0x0000001B +-#define HRCWL_CE_TO_PLL_1X28 0x0000001C +-#define HRCWL_CE_TO_PLL_1X29 0x0000001D +-#define HRCWL_CE_TO_PLL_1X30 0x0000001E +-#define HRCWL_CE_TO_PLL_1X31 0x0000001F ++/* RSR - Reset Status Register ++ */ ++#define RSR_RSTSRC 0xE0000000 /* Reset source */ ++#define RSR_RSTSRC_SHIFT 29 ++#define RSR_BSF 0x00010000 /* Boot seq. fail */ ++#define RSR_BSF_SHIFT 16 ++#define RSR_SWSR 0x00002000 /* software soft reset */ ++#define RSR_SWSR_SHIFT 13 ++#define RSR_SWHR 0x00001000 /* software hard reset */ ++#define RSR_SWHR_SHIFT 12 ++#define RSR_JHRS 0x00000200 /* jtag hreset */ ++#define RSR_JHRS_SHIFT 9 ++#define RSR_JSRS 0x00000100 /* jtag sreset status */ ++#define RSR_JSRS_SHIFT 8 ++#define RSR_CSHR 0x00000010 /* checkstop reset status */ ++#define RSR_CSHR_SHIFT 4 ++#define RSR_SWRS 0x00000008 /* software watchdog reset status */ ++#define RSR_SWRS_SHIFT 3 ++#define RSR_BMRS 0x00000004 /* bus monitop reset status */ ++#define RSR_BMRS_SHIFT 2 ++#define RSR_SRS 0x00000002 /* soft reset status */ ++#define RSR_SRS_SHIFT 1 ++#define RSR_HRS 0x00000001 /* hard reset status */ ++#define RSR_HRS_SHIFT 0 ++#define RSR_RES ~(RSR_RSTSRC | RSR_BSF | RSR_SWSR | RSR_SWHR |\ ++ RSR_JHRS | RSR_JSRS | RSR_CSHR | RSR_SWRS |\ ++ RSR_BMRS | RSR_SRS | RSR_HRS) ++/* RMR - Reset Mode Register ++ */ ++#define RMR_CSRE 0x00000001 /* checkstop reset enable */ ++#define RMR_CSRE_SHIFT 0 ++#define RMR_RES ~(RMR_CSRE) ++ ++/* RCR - Reset Control Register ++ */ ++#define RCR_SWHR 0x00000002 /* software hard reset */ ++#define RCR_SWSR 0x00000001 /* software soft reset */ ++#define RCR_RES ~(RCR_SWHR | RCR_SWSR) ++ ++/* RCER - Reset Control Enable Register ++ */ ++#define RCER_CRE 0x00000001 /* software hard reset */ ++#define RCER_RES ~(RCER_CRE) ++ ++/* SPMR - System PLL Mode Register ++ */ ++#define SPMR_LBIUCM 0x80000000 ++#define SPMR_DDRCM 0x40000000 ++#define SPMR_SPMF 0x0F000000 ++#define SPMR_CKID 0x00800000 ++#define SPMR_CKID_SHIFT 23 ++#define SPMR_COREPLL 0x007F0000 ++#define SPMR_CEVCOD 0x000000C0 ++#define SPMR_CEPDF 0x00000020 ++#define SPMR_CEPMF 0x0000001F ++ ++/* OCCR - Output Clock Control Register ++ */ ++#define OCCR_PCICOE0 0x80000000 ++#define OCCR_PCICOE1 0x40000000 ++#define OCCR_PCICOE2 0x20000000 ++#define OCCR_PCICOE3 0x10000000 ++#define OCCR_PCICOE4 0x08000000 ++#define OCCR_PCICOE5 0x04000000 ++#define OCCR_PCICOE6 0x02000000 ++#define OCCR_PCICOE7 0x01000000 ++#define OCCR_PCICD0 0x00800000 ++#define OCCR_PCICD1 0x00400000 ++#define OCCR_PCICD2 0x00200000 ++#define OCCR_PCICD3 0x00100000 ++#define OCCR_PCICD4 0x00080000 ++#define OCCR_PCICD5 0x00040000 ++#define OCCR_PCICD6 0x00020000 ++#define OCCR_PCICD7 0x00010000 ++#define OCCR_PCI1CR 0x00000002 ++#define OCCR_PCI2CR 0x00000001 ++#define OCCR_PCICR OCCR_PCI1CR ++ ++/* SCCR - System Clock Control Register ++ */ ++#define SCCR_ENCCM 0x03000000 ++#define SCCR_ENCCM_SHIFT 24 ++#define SCCR_ENCCM_0 0x00000000 ++#define SCCR_ENCCM_1 0x01000000 ++#define SCCR_ENCCM_2 0x02000000 ++#define SCCR_ENCCM_3 0x03000000 ++ ++#define SCCR_PCICM 0x00010000 ++#define SCCR_PCICM_SHIFT 16 ++ ++/* SCCR bits - MPC8349 specific */ ++#define SCCR_TSEC1CM 0xc0000000 ++#define SCCR_TSEC1CM_SHIFT 30 ++#define SCCR_TSEC1CM_0 0x00000000 ++#define SCCR_TSEC1CM_1 0x40000000 ++#define SCCR_TSEC1CM_2 0x80000000 ++#define SCCR_TSEC1CM_3 0xC0000000 ++ ++#define SCCR_TSEC2CM 0x30000000 ++#define SCCR_TSEC2CM_SHIFT 28 ++#define SCCR_TSEC2CM_0 0x00000000 ++#define SCCR_TSEC2CM_1 0x10000000 ++#define SCCR_TSEC2CM_2 0x20000000 ++#define SCCR_TSEC2CM_3 0x30000000 ++ ++#define SCCR_USBMPHCM 0x00c00000 ++#define SCCR_USBMPHCM_SHIFT 22 ++#define SCCR_USBDRCM 0x00300000 ++#define SCCR_USBDRCM_SHIFT 20 ++ ++#define SCCR_USBCM_0 0x00000000 ++#define SCCR_USBCM_1 0x00500000 ++#define SCCR_USBCM_2 0x00A00000 ++#define SCCR_USBCM_3 0x00F00000 ++ ++#define SCCR_CLK_MASK ( SCCR_TSEC1CM_3 \ ++ | SCCR_TSEC2CM_3 \ ++ | SCCR_ENCCM_3 \ ++ | SCCR_USBCM_3 ) ++ ++#define SCCR_DEFAULT 0xFFFFFFFF ++ ++/* CSn_BDNS - Chip Select memory Bounds Register ++ */ ++#define CSBNDS_SA 0x00FF0000 ++#define CSBNDS_SA_SHIFT 8 ++#define CSBNDS_EA 0x000000FF ++#define CSBNDS_EA_SHIFT 24 ++ ++/* CSn_CONFIG - Chip Select Configuration Register ++ */ ++#define CSCONFIG_EN 0x80000000 ++#define CSCONFIG_AP 0x00800000 ++#define CSCONFIG_ROW_BIT 0x00000700 ++#define CSCONFIG_ROW_BIT_12 0x00000000 ++#define CSCONFIG_ROW_BIT_13 0x00000100 ++#define CSCONFIG_ROW_BIT_14 0x00000200 ++#define CSCONFIG_COL_BIT 0x00000007 ++#define CSCONFIG_COL_BIT_8 0x00000000 ++#define CSCONFIG_COL_BIT_9 0x00000001 ++#define CSCONFIG_COL_BIT_10 0x00000002 ++#define CSCONFIG_COL_BIT_11 0x00000003 ++ ++/* TIMING_CFG_1 - DDR SDRAM Timing Configuration 1 ++ */ ++#define TIMING_CFG1_PRETOACT 0x70000000 ++#define TIMING_CFG1_PRETOACT_SHIFT 28 ++#define TIMING_CFG1_ACTTOPRE 0x0F000000 ++#define TIMING_CFG1_ACTTOPRE_SHIFT 24 ++#define TIMING_CFG1_ACTTORW 0x00700000 ++#define TIMING_CFG1_ACTTORW_SHIFT 20 ++#define TIMING_CFG1_CASLAT 0x00070000 ++#define TIMING_CFG1_CASLAT_SHIFT 16 ++#define TIMING_CFG1_REFREC 0x0000F000 ++#define TIMING_CFG1_REFREC_SHIFT 12 ++#define TIMING_CFG1_WRREC 0x00000700 ++#define TIMING_CFG1_WRREC_SHIFT 8 ++#define TIMING_CFG1_ACTTOACT 0x00000070 ++#define TIMING_CFG1_ACTTOACT_SHIFT 4 ++#define TIMING_CFG1_WRTORD 0x00000007 ++#define TIMING_CFG1_WRTORD_SHIFT 0 ++#define TIMING_CFG1_CASLAT_20 0x00030000 /* CAS latency = 2.0 */ ++#define TIMING_CFG1_CASLAT_25 0x00040000 /* CAS latency = 2.5 */ ++ ++/* TIMING_CFG_2 - DDR SDRAM Timing Configuration 2 ++ */ ++#define TIMING_CFG2_CPO 0x0F000000 ++#define TIMING_CFG2_CPO_SHIFT 24 ++#define TIMING_CFG2_ACSM 0x00080000 ++#define TIMING_CFG2_WR_DATA_DELAY 0x00001C00 ++#define TIMING_CFG2_WR_DATA_DELAY_SHIFT 10 ++#define TIMING_CFG2_CPO_DEF 0x00000000 /* default (= CASLAT + 1) */ ++ ++/* DDR_SDRAM_CFG - DDR SDRAM Control Configuration ++ */ ++#define SDRAM_CFG_MEM_EN 0x80000000 ++#define SDRAM_CFG_SREN 0x40000000 ++#define SDRAM_CFG_ECC_EN 0x20000000 ++#define SDRAM_CFG_RD_EN 0x10000000 ++#define SDRAM_CFG_SDRAM_TYPE 0x03000000 ++#define SDRAM_CFG_SDRAM_TYPE_SHIFT 24 ++#define SDRAM_CFG_DYN_PWR 0x00200000 ++#define SDRAM_CFG_32_BE 0x00080000 ++#define SDRAM_CFG_8_BE 0x00040000 ++#define SDRAM_CFG_NCAP 0x00020000 ++#define SDRAM_CFG_2T_EN 0x00008000 ++#define SDRAM_CFG_SDRAM_TYPE_DDR 0x02000000 ++ ++/* DDR_SDRAM_MODE - DDR SDRAM Mode Register ++ */ ++#define SDRAM_MODE_ESD 0xFFFF0000 ++#define SDRAM_MODE_ESD_SHIFT 16 ++#define SDRAM_MODE_SD 0x0000FFFF ++#define SDRAM_MODE_SD_SHIFT 0 ++#define DDR_MODE_EXT_MODEREG 0x4000 /* select extended mode reg */ ++#define DDR_MODE_EXT_OPMODE 0x3FF8 /* operating mode, mask */ ++#define DDR_MODE_EXT_OP_NORMAL 0x0000 /* normal operation */ ++#define DDR_MODE_QFC 0x0004 /* QFC / compatibility, mask */ ++#define DDR_MODE_QFC_COMP 0x0000 /* compatible to older SDRAMs */ ++#define DDR_MODE_WEAK 0x0002 /* weak drivers */ ++#define DDR_MODE_DLL_DIS 0x0001 /* disable DLL */ ++#define DDR_MODE_CASLAT 0x0070 /* CAS latency, mask */ ++#define DDR_MODE_CASLAT_15 0x0010 /* CAS latency 1.5 */ ++#define DDR_MODE_CASLAT_20 0x0020 /* CAS latency 2 */ ++#define DDR_MODE_CASLAT_25 0x0060 /* CAS latency 2.5 */ ++#define DDR_MODE_CASLAT_30 0x0030 /* CAS latency 3 */ ++#define DDR_MODE_BTYPE_SEQ 0x0000 /* sequential burst */ ++#define DDR_MODE_BTYPE_ILVD 0x0008 /* interleaved burst */ ++#define DDR_MODE_BLEN_2 0x0001 /* burst length 2 */ ++#define DDR_MODE_BLEN_4 0x0002 /* burst length 4 */ ++#define DDR_REFINT_166MHZ_7US 1302 /* exact value for 7.8125us */ ++#define DDR_BSTOPRE 256 /* use 256 cycles as a starting point */ ++#define DDR_MODE_MODEREG 0x0000 /* select mode register */ ++ ++/* DDR_SDRAM_INTERVAL - DDR SDRAM Interval Register ++ */ ++#define SDRAM_INTERVAL_REFINT 0x3FFF0000 ++#define SDRAM_INTERVAL_REFINT_SHIFT 16 ++#define SDRAM_INTERVAL_BSTOPRE 0x00003FFF ++#define SDRAM_INTERVAL_BSTOPRE_SHIFT 0 ++ ++/* DDR_SDRAM_CLK_CNTL - DDR SDRAM Clock Control Register ++ */ ++#define DDR_SDRAM_CLK_CNTL_SS_EN 0x80000000 ++#define DDR_SDRAM_CLK_CNTL_CLK_ADJUST_025 0x01000000 ++#define DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05 0x02000000 ++#define DDR_SDRAM_CLK_CNTL_CLK_ADJUST_075 0x03000000 ++#define DDR_SDRAM_CLK_CNTL_CLK_ADJUST_1 0x04000000 ++ ++/* ECC_ERR_INJECT - Memory data path error injection mask ECC ++ */ ++#define ECC_ERR_INJECT_EMB (0x80000000>>22) /* ECC Mirror Byte */ ++#define ECC_ERR_INJECT_EIEN (0x80000000>>23) /* Error Injection Enable */ ++#define ECC_ERR_INJECT_EEIM (0xff000000>>24) /* ECC Erroe Injection Enable */ ++#define ECC_ERR_INJECT_EEIM_SHIFT 0 ++ ++/* CAPTURE_ECC - Memory data path read capture ECC ++ */ ++#define CAPTURE_ECC_ECE (0xff000000>>24) ++#define CAPTURE_ECC_ECE_SHIFT 0 ++ ++/* ERR_DETECT - Memory error detect ++ */ ++#define ECC_ERROR_DETECT_MME (0x80000000>>0) /* Multiple Memory Errors */ ++#define ECC_ERROR_DETECT_MBE (0x80000000>>28) /* Multiple-Bit Error */ ++#define ECC_ERROR_DETECT_SBE (0x80000000>>29) /* Single-Bit ECC Error Pickup */ ++#define ECC_ERROR_DETECT_MSE (0x80000000>>31) /* Memory Select Error */ ++ ++/* ERR_DISABLE - Memory error disable ++ */ ++#define ECC_ERROR_DISABLE_MBED (0x80000000>>28) /* Multiple-Bit ECC Error Disable */ ++#define ECC_ERROR_DISABLE_SBED (0x80000000>>29) /* Sinle-Bit ECC Error disable */ ++#define ECC_ERROR_DISABLE_MSED (0x80000000>>31) /* Memory Select Error Disable */ ++#define ECC_ERROR_ENABLE ~(ECC_ERROR_DISABLE_MSED | ECC_ERROR_DISABLE_SBED |\ ++ ECC_ERROR_DISABLE_MBED) ++/* ERR_INT_EN - Memory error interrupt enable ++ */ ++#define ECC_ERR_INT_EN_MBEE (0x80000000>>28) /* Multiple-Bit ECC Error Interrupt Enable */ ++#define ECC_ERR_INT_EN_SBEE (0x80000000>>29) /* Single-Bit ECC Error Interrupt Enable */ ++#define ECC_ERR_INT_EN_MSEE (0x80000000>>31) /* Memory Select Error Interrupt Enable */ ++#define ECC_ERR_INT_DISABLE ~(ECC_ERR_INT_EN_MBEE | ECC_ERR_INT_EN_SBEE |\ ++ ECC_ERR_INT_EN_MSEE) ++/* CAPTURE_ATTRIBUTES - Memory error attributes capture ++ */ ++#define ECC_CAPT_ATTR_BNUM (0xe0000000>>1) /* Data Beat Num */ ++#define ECC_CAPT_ATTR_BNUM_SHIFT 28 ++#define ECC_CAPT_ATTR_TSIZ (0xc0000000>>6) /* Transaction Size */ ++#define ECC_CAPT_ATTR_TSIZ_FOUR_DW 0 ++#define ECC_CAPT_ATTR_TSIZ_ONE_DW 1 ++#define ECC_CAPT_ATTR_TSIZ_TWO_DW 2 ++#define ECC_CAPT_ATTR_TSIZ_THREE_DW 3 ++#define ECC_CAPT_ATTR_TSIZ_SHIFT 24 ++#define ECC_CAPT_ATTR_TSRC (0xf8000000>>11) /* Transaction Source */ ++#define ECC_CAPT_ATTR_TSRC_E300_CORE_DT 0x0 ++#define ECC_CAPT_ATTR_TSRC_E300_CORE_IF 0x2 ++#define ECC_CAPT_ATTR_TSRC_TSEC1 0x4 ++#define ECC_CAPT_ATTR_TSRC_TSEC2 0x5 ++#define ECC_CAPT_ATTR_TSRC_USB (0x06|0x07) ++#define ECC_CAPT_ATTR_TSRC_ENCRYPT 0x8 ++#define ECC_CAPT_ATTR_TSRC_I2C 0x9 ++#define ECC_CAPT_ATTR_TSRC_JTAG 0xA ++#define ECC_CAPT_ATTR_TSRC_PCI1 0xD ++#define ECC_CAPT_ATTR_TSRC_PCI2 0xE ++#define ECC_CAPT_ATTR_TSRC_DMA 0xF ++#define ECC_CAPT_ATTR_TSRC_SHIFT 16 ++#define ECC_CAPT_ATTR_TTYP (0xe0000000>>18) /* Transaction Type */ ++#define ECC_CAPT_ATTR_TTYP_WRITE 0x1 ++#define ECC_CAPT_ATTR_TTYP_READ 0x2 ++#define ECC_CAPT_ATTR_TTYP_R_M_W 0x3 ++#define ECC_CAPT_ATTR_TTYP_SHIFT 12 ++#define ECC_CAPT_ATTR_VLD (0x80000000>>31) /* Valid */ ++ ++/* ERR_SBE - Single bit ECC memory error management ++ */ ++#define ECC_ERROR_MAN_SBET (0xff000000>>8) /* Single-Bit Error Threshold 0..255 */ ++#define ECC_ERROR_MAN_SBET_SHIFT 16 ++#define ECC_ERROR_MAN_SBEC (0xff000000>>24) /* Single Bit Error Counter 0..255 */ ++#define ECC_ERROR_MAN_SBEC_SHIFT 0 ++ ++/* BR - Base Registers ++ */ ++#define BR0 0x5000 /* Register offset to immr */ ++#define BR1 0x5008 ++#define BR2 0x5010 ++#define BR3 0x5018 ++#define BR4 0x5020 ++#define BR5 0x5028 ++#define BR6 0x5030 ++#define BR7 0x5038 ++ ++#define BR_BA 0xFFFF8000 ++#define BR_BA_SHIFT 15 ++#define BR_PS 0x00001800 ++#define BR_PS_SHIFT 11 ++#define BR_PS_8 0x00000800 /* Port Size 8 bit */ ++#define BR_PS_16 0x00001000 /* Port Size 16 bit */ ++#define BR_PS_32 0x00001800 /* Port Size 32 bit */ ++#define BR_DECC 0x00000600 ++#define BR_DECC_SHIFT 9 ++#define BR_WP 0x00000100 ++#define BR_WP_SHIFT 8 ++#define BR_MSEL 0x000000E0 ++#define BR_MSEL_SHIFT 5 ++#define BR_MS_GPCM 0x00000000 /* GPCM */ ++#define BR_MS_SDRAM 0x00000060 /* SDRAM */ ++#define BR_MS_UPMA 0x00000080 /* UPMA */ ++#define BR_MS_UPMB 0x000000A0 /* UPMB */ ++#define BR_MS_UPMC 0x000000C0 /* UPMC */ ++#if defined(CONFIG_MPC8360) ++#define BR_ATOM 0x0000000C ++#define BR_ATOM_SHIFT 2 + #endif ++#define BR_V 0x00000001 ++#define BR_V_SHIFT 0 + +-/* +- * LCRR - Clock Ratio Register (10.3.1.16) +- */ +-#define LCRR_DBYP 0x80000000 +-#define LCRR_DBYP_SHIFT 31 +-#define LCRR_BUFCMDC 0x30000000 +-#define LCRR_BUFCMDC_1 0x10000000 +-#define LCRR_BUFCMDC_2 0x20000000 +-#define LCRR_BUFCMDC_3 0x30000000 +-#define LCRR_BUFCMDC_4 0x00000000 +-#define LCRR_BUFCMDC_SHIFT 28 +-#define LCRR_ECL 0x03000000 +-#define LCRR_ECL_4 0x00000000 +-#define LCRR_ECL_5 0x01000000 +-#define LCRR_ECL_6 0x02000000 +-#define LCRR_ECL_7 0x03000000 +-#define LCRR_ECL_SHIFT 24 +-#define LCRR_EADC 0x00030000 +-#define LCRR_EADC_1 0x00010000 +-#define LCRR_EADC_2 0x00020000 +-#define LCRR_EADC_3 0x00030000 +-#define LCRR_EADC_4 0x00000000 +-#define LCRR_EADC_SHIFT 16 +-#define LCRR_CLKDIV 0x0000000F +-#define LCRR_CLKDIV_2 0x00000002 +-#define LCRR_CLKDIV_4 0x00000004 +-#define LCRR_CLKDIV_8 0x00000008 +-#define LCRR_CLKDIV_SHIFT 0 ++#if defined(CONFIG_MPC8349) ++#define BR_RES ~(BR_BA | BR_PS | BR_DECC | BR_WP | BR_MSEL | BR_V) ++#elif defined(CONFIG_MPC8360) ++#define BR_RES ~(BR_BA | BR_PS | BR_DECC | BR_WP | BR_MSEL | BR_ATOM | BR_V) ++#endif + +-/* +- * SCCR-System Clock Control Register +- */ +-#define SCCR_TSEC1CM_0 0x00000000 +-#define SCCR_TSEC1CM_1 0x40000000 +-#define SCCR_TSEC1CM_2 0x80000000 +-#define SCCR_TSEC1CM_3 0xC0000000 +-#define SCCR_TSEC2CM_0 0x00000000 +-#define SCCR_TSEC2CM_1 0x10000000 +-#define SCCR_TSEC2CM_2 0x20000000 +-#define SCCR_TSEC2CM_3 0x30000000 +-#define SCCR_ENCCM_0 0x00000000 +-#define SCCR_ENCCM_1 0x01000000 +-#define SCCR_ENCCM_2 0x02000000 +-#define SCCR_ENCCM_3 0x03000000 +-#define SCCR_USBCM_0 0x00000000 +-#define SCCR_USBCM_1 0x00500000 +-#define SCCR_USBCM_2 0x00A00000 +-#define SCCR_USBCM_3 0x00F00000 +- +-#define SCCR_CLK_MASK ( SCCR_TSEC1CM_3 \ +- | SCCR_TSEC2CM_3 \ +- | SCCR_ENCCM_3 \ +- | SCCR_USBCM_3 ) +- +-#define SCCR_DEFAULT 0xFFFFFFFF ++/* OR - Option Registers ++ */ ++#define OR0 0x5004 /* Register offset to immr */ ++#define OR1 0x500C ++#define OR2 0x5014 ++#define OR3 0x501C ++#define OR4 0x5024 ++#define OR5 0x502C ++#define OR6 0x5034 ++#define OR7 0x503C ++ ++#define OR_GPCM_AM 0xFFFF8000 ++#define OR_GPCM_AM_SHIFT 15 ++#define OR_GPCM_BCTLD 0x00001000 ++#define OR_GPCM_BCTLD_SHIFT 12 ++#define OR_GPCM_CSNT 0x00000800 ++#define OR_GPCM_CSNT_SHIFT 11 ++#define OR_GPCM_ACS 0x00000600 ++#define OR_GPCM_ACS_SHIFT 9 ++#define OR_GPCM_ACS_0b10 0x00000400 ++#define OR_GPCM_ACS_0b11 0x00000600 ++#define OR_GPCM_XACS 0x00000100 ++#define OR_GPCM_XACS_SHIFT 8 ++#define OR_GPCM_SCY 0x000000F0 ++#define OR_GPCM_SCY_SHIFT 4 ++#define OR_GPCM_SCY_1 0x00000010 ++#define OR_GPCM_SCY_2 0x00000020 ++#define OR_GPCM_SCY_3 0x00000030 ++#define OR_GPCM_SCY_4 0x00000040 ++#define OR_GPCM_SCY_5 0x00000050 ++#define OR_GPCM_SCY_6 0x00000060 ++#define OR_GPCM_SCY_7 0x00000070 ++#define OR_GPCM_SCY_8 0x00000080 ++#define OR_GPCM_SCY_9 0x00000090 ++#define OR_GPCM_SCY_10 0x000000a0 ++#define OR_GPCM_SCY_11 0x000000b0 ++#define OR_GPCM_SCY_12 0x000000c0 ++#define OR_GPCM_SCY_13 0x000000d0 ++#define OR_GPCM_SCY_14 0x000000e0 ++#define OR_GPCM_SCY_15 0x000000f0 ++#define OR_GPCM_SETA 0x00000008 ++#define OR_GPCM_SETA_SHIFT 3 ++#define OR_GPCM_TRLX 0x00000004 ++#define OR_GPCM_TRLX_SHIFT 2 ++#define OR_GPCM_EHTR 0x00000002 ++#define OR_GPCM_EHTR_SHIFT 1 ++#define OR_GPCM_EAD 0x00000001 ++#define OR_GPCM_EAD_SHIFT 0 ++ ++#define OR_UPM_AM 0xFFFF8000 ++#define OR_UPM_AM_SHIFT 15 ++#define OR_UPM_XAM 0x00006000 ++#define OR_UPM_XAM_SHIFT 13 ++#define OR_UPM_BCTLD 0x00001000 ++#define OR_UPM_BCTLD_SHIFT 12 ++#define OR_UPM_BI 0x00000100 ++#define OR_UPM_BI_SHIFT 8 ++#define OR_UPM_TRLX 0x00000004 ++#define OR_UPM_TRLX_SHIFT 2 ++#define OR_UPM_EHTR 0x00000002 ++#define OR_UPM_EHTR_SHIFT 1 ++#define OR_UPM_EAD 0x00000001 ++#define OR_UPM_EAD_SHIFT 0 ++ ++#define OR_SDRAM_AM 0xFFFF8000 ++#define OR_SDRAM_AM_SHIFT 15 ++#define OR_SDRAM_XAM 0x00006000 ++#define OR_SDRAM_XAM_SHIFT 13 ++#define OR_SDRAM_COLS 0x00001C00 ++#define OR_SDRAM_COLS_SHIFT 10 ++#define OR_SDRAM_ROWS 0x000001C0 ++#define OR_SDRAM_ROWS_SHIFT 6 ++#define OR_SDRAM_PMSEL 0x00000020 ++#define OR_SDRAM_PMSEL_SHIFT 5 ++#define OR_SDRAM_EAD 0x00000001 ++#define OR_SDRAM_EAD_SHIFT 0 ++ ++/* LBCR - Local Bus Configuration Register ++ */ ++#define LBCR_LDIS 0x80000000 ++#define LBCR_LDIS_SHIFT 31 ++#define LBCR_BCTLC 0x00C00000 ++#define LBCR_BCTLC_SHIFT 22 ++#define LBCR_LPBSE 0x00020000 ++#define LBCR_LPBSE_SHIFT 17 ++#define LBCR_EPAR 0x00010000 ++#define LBCR_EPAR_SHIFT 16 ++#define LBCR_BMT 0x0000FF00 ++#define LBCR_BMT_SHIFT 8 ++ ++/* LCRR - Clock Ratio Register ++ */ ++#define LCRR_DBYP 0x80000000 ++#define LCRR_DBYP_SHIFT 31 ++#define LCRR_BUFCMDC 0x30000000 ++#define LCRR_BUFCMDC_SHIFT 28 ++#define LCRR_BUFCMDC_1 0x10000000 ++#define LCRR_BUFCMDC_2 0x20000000 ++#define LCRR_BUFCMDC_3 0x30000000 ++#define LCRR_BUFCMDC_4 0x00000000 ++#define LCRR_ECL 0x03000000 ++#define LCRR_ECL_SHIFT 24 ++#define LCRR_ECL_4 0x00000000 ++#define LCRR_ECL_5 0x01000000 ++#define LCRR_ECL_6 0x02000000 ++#define LCRR_ECL_7 0x03000000 ++#define LCRR_EADC 0x00030000 ++#define LCRR_EADC_SHIFT 16 ++#define LCRR_EADC_1 0x00010000 ++#define LCRR_EADC_2 0x00020000 ++#define LCRR_EADC_3 0x00030000 ++#define LCRR_EADC_4 0x00000000 ++#define LCRR_CLKDIV 0x0000000F ++#define LCRR_CLKDIV_SHIFT 0 ++#define LCRR_CLKDIV_2 0x00000002 ++#define LCRR_CLKDIV_4 0x00000004 ++#define LCRR_CLKDIV_8 0x00000008 ++ ++/* DMAMR - DMA Mode Register ++ */ ++#define DMA_CHANNEL_START 0x00000001 /* Bit - DMAMRn CS */ ++#define DMA_CHANNEL_TRANSFER_MODE_DIRECT 0x00000004 /* Bit - DMAMRn CTM */ ++#define DMA_CHANNEL_SOURCE_ADRESSS_HOLD_EN 0x00001000 /* Bit - DMAMRn SAHE */ ++#define DMA_CHANNEL_SOURCE_ADDRESS_HOLD_1B 0x00000000 /* 2Bit- DMAMRn SAHTS 1byte */ ++#define DMA_CHANNEL_SOURCE_ADDRESS_HOLD_2B 0x00004000 /* 2Bit- DMAMRn SAHTS 2bytes */ ++#define DMA_CHANNEL_SOURCE_ADDRESS_HOLD_4B 0x00008000 /* 2Bit- DMAMRn SAHTS 4bytes */ ++#define DMA_CHANNEL_SOURCE_ADDRESS_HOLD_8B 0x0000c000 /* 2Bit- DMAMRn SAHTS 8bytes */ ++#define DMA_CHANNEL_SNOOP 0x00010000 /* Bit - DMAMRn DMSEN */ ++ ++/* DMASR - DMA Status Register ++ */ ++#define DMA_CHANNEL_BUSY 0x00000004 /* Bit - DMASRn CB */ ++#define DMA_CHANNEL_TRANSFER_ERROR 0x00000080 /* Bit - DMASRn TE */ ++ ++/* CONFIG_ADDRESS - PCI Config Address Register ++ */ ++#define PCI_CONFIG_ADDRESS_EN 0x80000000 ++#define PCI_CONFIG_ADDRESS_BN_SHIFT 16 ++#define PCI_CONFIG_ADDRESS_BN_MASK 0x00ff0000 ++#define PCI_CONFIG_ADDRESS_DN_SHIFT 11 ++#define PCI_CONFIG_ADDRESS_DN_MASK 0x0000f800 ++#define PCI_CONFIG_ADDRESS_FN_SHIFT 8 ++#define PCI_CONFIG_ADDRESS_FN_MASK 0x00000700 ++#define PCI_CONFIG_ADDRESS_RN_SHIFT 0 ++#define PCI_CONFIG_ADDRESS_RN_MASK 0x000000fc ++ ++/* POTAR - PCI Outbound Translation Address Register ++ */ ++#define POTAR_TA_MASK 0x000fffff ++ ++/* POBAR - PCI Outbound Base Address Register ++ */ ++#define POBAR_BA_MASK 0x000fffff ++ ++/* POCMR - PCI Outbound Comparision Mask Register ++ */ ++#define POCMR_EN 0x80000000 ++#define POCMR_IO 0x40000000 /* 0-memory space 1-I/O space */ ++#define POCMR_SE 0x20000000 /* streaming enable */ ++#define POCMR_DST 0x10000000 /* 0-PCI1 1-PCI2 */ ++#define POCMR_CM_MASK 0x000fffff ++#define POCMR_CM_4G 0x00000000 ++#define POCMR_CM_2G 0x00080000 ++#define POCMR_CM_1G 0x000C0000 ++#define POCMR_CM_512M 0x000E0000 ++#define POCMR_CM_256M 0x000F0000 ++#define POCMR_CM_128M 0x000F8000 ++#define POCMR_CM_64M 0x000FC000 ++#define POCMR_CM_32M 0x000FE000 ++#define POCMR_CM_16M 0x000FF000 ++#define POCMR_CM_8M 0x000FF800 ++#define POCMR_CM_4M 0x000FFC00 ++#define POCMR_CM_2M 0x000FFE00 ++#define POCMR_CM_1M 0x000FFF00 ++#define POCMR_CM_512K 0x000FFF80 ++#define POCMR_CM_256K 0x000FFFC0 ++#define POCMR_CM_128K 0x000FFFE0 ++#define POCMR_CM_64K 0x000FFFF0 ++#define POCMR_CM_32K 0x000FFFF8 ++#define POCMR_CM_16K 0x000FFFFC ++#define POCMR_CM_8K 0x000FFFFE ++#define POCMR_CM_4K 0x000FFFFF ++ ++/* PITAR - PCI Inbound Translation Address Register ++ */ ++#define PITAR_TA_MASK 0x000fffff ++ ++/* PIBAR - PCI Inbound Base/Extended Address Register ++ */ ++#define PIBAR_MASK 0xffffffff ++#define PIEBAR_EBA_MASK 0x000fffff ++ ++/* PIWAR - PCI Inbound Windows Attributes Register ++ */ ++#define PIWAR_EN 0x80000000 ++#define PIWAR_PF 0x20000000 ++#define PIWAR_RTT_MASK 0x000f0000 ++#define PIWAR_RTT_NO_SNOOP 0x00040000 ++#define PIWAR_RTT_SNOOP 0x00050000 ++#define PIWAR_WTT_MASK 0x0000f000 ++#define PIWAR_WTT_NO_SNOOP 0x00004000 ++#define PIWAR_WTT_SNOOP 0x00005000 ++#define PIWAR_IWS_MASK 0x0000003F ++#define PIWAR_IWS_4K 0x0000000B ++#define PIWAR_IWS_8K 0x0000000C ++#define PIWAR_IWS_16K 0x0000000D ++#define PIWAR_IWS_32K 0x0000000E ++#define PIWAR_IWS_64K 0x0000000F ++#define PIWAR_IWS_128K 0x00000010 ++#define PIWAR_IWS_256K 0x00000011 ++#define PIWAR_IWS_512K 0x00000012 ++#define PIWAR_IWS_1M 0x00000013 ++#define PIWAR_IWS_2M 0x00000014 ++#define PIWAR_IWS_4M 0x00000015 ++#define PIWAR_IWS_8M 0x00000016 ++#define PIWAR_IWS_16M 0x00000017 ++#define PIWAR_IWS_32M 0x00000018 ++#define PIWAR_IWS_64M 0x00000019 ++#define PIWAR_IWS_128M 0x0000001A ++#define PIWAR_IWS_256M 0x0000001B ++#define PIWAR_IWS_512M 0x0000001C ++#define PIWAR_IWS_1G 0x0000001D ++#define PIWAR_IWS_2G 0x0000001E + + #endif /* __MPC83XX_H__ */ diff --git a/packages/uboot/u-boot_1.1.6.bb b/packages/uboot/u-boot_1.1.6.bb index bec1a619e4..e003c69d7b 100644 --- a/packages/uboot/u-boot_1.1.6.bb +++ b/packages/uboot/u-boot_1.1.6.bb @@ -1,12 +1,25 @@ require u-boot.inc -PR = "r2" +PR = "r3" SRC_URI = "ftp://ftp.denx.de/pub/u-boot/u-boot-1.1.6.tar.bz2 \ - file://devkit-idp.patch;patch=1" + file://devkit-idp.patch;patch=1 \ +" SRC_URI_append_sarge-at91 = " file://sarge-uboot.patch;patch=1" +SRC_URI_append_mpc8323e-rdb = " file://u-boot-1.1.6-fsl-1-mpc83xx-20061206.patch;patch=1 \ + file://u-boot-1.1.6-fsl-1-Fix-the-UEC-driver-bug-of-QE.patch;patch=1 \ + file://u-boot-1.1.6-fsl-1-streamline-the-83xx-immr-head-file.patch;patch=1 \ + file://u-boot-1.1.6-fsl-1-Add-support-for-the-MPC832XEMDS-board.patch;patch=1 \ + file://u-boot-1.1.6-fsl-1-Add-the-MPC832XEMDS-board-readme.patch;patch=1 \ + file://u-boot-1.1.6-fsl-1-Added-MPC8323E-RDB-board-support-2.patch;patch=1 \ + file://u-boot-1.1.6-fsl-1-UEC-remove-udelay.patch;patch=1 \ + file://u-boot-1.1.6-83xx-optimizations.patch;patch=1 \ +" + + + PACKAGE_ARCH = "${MACHINE_ARCH}" UBOOT_MACHINE_sarge-at91 = "sarge_config" |