diff options
Diffstat (limited to 'packages/tasks/task-slugos.bb')
| -rw-r--r-- | packages/tasks/task-slugos.bb | 161 |
1 files changed, 0 insertions, 161 deletions
diff --git a/packages/tasks/task-slugos.bb b/packages/tasks/task-slugos.bb deleted file mode 100644 index f622aebfe5..0000000000 --- a/packages/tasks/task-slugos.bb +++ /dev/null @@ -1,161 +0,0 @@ -# This describes a generic SlugOS image, even though the bb file is -# called 'slugos-image.bb' the distro specific configuration is -# done in conf/distro/${DISTRO}.conf (which should always include -# conf/distro/slugos.conf to get the standard settings). -# -DESCRIPTION = "Task packages for the SlugOS distribution" -HOMEPAGE = "http://www.nslu2-linux.org" -LICENSE = "MIT" -PR = "r22" -PACKAGE_ARCH = "${MACHINE_ARCH}" -COMPATIBLE_MACHINE = "(nslu2|ixp4xx)" -ALLOW_EMPTY = "1" - -#---------------------------------------------------------------------------------- -# FIRMWARE CONFIGURATION -#---------------------------------------------------------------------------------- -# EXTRA PACKAGES -# -------------- -# The standard firmware contents and additional packages built as requirements -# of the firmware are defined here in SLUGOS_STANDARD_RDEPENDS. -SLUGOS_STANDARD_RDEPENDS = "" -SLUGOS_STANDARD_RRECOMMENDS = "" - -# The full cpio (non-busybox) is required for turnup and sysconfig. -SLUGOS_STANDARD_RRECOMMENDS += "\ -cpio \ -" - -# These lines add support for formatting ext2 and ext3 file systems -# on a hard disk attached to the NSLU2. ext3 is the standard Linux -# file system. -SLUGOS_STANDARD_RRECOMMENDS += "\ -e2fsprogs-mke2fs \ -e2fsprogs-fsck \ -e2fsprogs-e2fsck \ -e2fsprogs-badblocks \ -e2fsprogs-blkid \ -" - -# Filesystem selection. Adding entries here adds the module to the -# image. The module must be built as part of nslu2-kernel (i.e. it -# must be specified as a module in the defconfig file). The NLS -# support charset modules must be given explicitly and must match -# the codepage/iocharset and NLS handling for the file systems which -# require them. The installed lanugage set is minimal but sufficient -# for any file system (since it uses utf8). See -# http://www.nslu2-linux.orgwiki/HowTo/MountFATFileSystems -# for more information on the language behaviour of the DOS file -# systems. -# -# KERNEL LEVEL FILE SYSTEM SUPPORT -# -------------------------------- -# NOTE: removing kernel-module-nfs from this list will prevent NFS -# boot (however you can do a simple flash file system boot - no -# attached disk - and install the nfs modules from ssh.) -# The altboot mechanism requires kernel-module-loop. -SLUGOS_STANDARD_RRECOMMENDS += "\ -kernel-module-ext2 \ -kernel-module-jbd \ -kernel-module-ext3 \ -kernel-module-vfat \ -kernel-module-nls-cp437 \ -kernel-module-nls-utf8 \ -kernel-module-nfs \ -" - -# Add daemon required for HW RNG support -SLUGOS_RNG_TOOLS_PACKAGE = "rng-tools" -SLUGOS_RNG_TOOLS_PACKAGE_linux-uclibc = "" -SLUGOS_STANDARD_RRECOMMENDS += "\ -${SLUGOS_RNG_TOOLS_PACKAGE} \ -" - -# Add modules required for usb support -SLUGOS_STANDARD_RRECOMMENDS += "\ -kernel-module-ehci-hcd \ -kernel-module-ohci-hcd \ -kernel-module-uhci-hcd \ -" - -# Add modules required for IDE support -SLUGOS_STANDARD_RRECOMMENDS += "\ -kernel-module-libata \ -kernel-module-pata-artop \ -" - -# Add modules required for Network support -SLUGOS_STANDARD_RRECOMMENDS += "\ -kernel-module-mii \ -kernel-module-ixp4xx-mac \ -kernel-module-ixp4xx-qmgr \ -kernel-module-via-velocity \ -kernel-module-netconsole \ -" - -# Add packages and modules required for RAID-1 support -# (temporary, intended only to facilitate testing - MJW) -SLUGOS_STANDARD_RRECOMMENDS += "\ -mdadm \ -kernel-module-md-mod \ -kernel-module-raid1 \ -" - -# Other candidate packages that have been considered and -# are intentionally excluded from the base flash image. -# -# portmap \ -# kexec-tools \ -# kernel-module-isofs \ -# kernel-module-udf \ -# kernel-module-loop \ -# wireless-tools \ -# wpa-supplicant \ -# zd1211-firmware kernel-module-zd1211rw \ -# madwifi-ng-modules madwifi-ng-tools \ - -DISTRO_EXTRA_DEPENDS ?= "" -DEPENDS += "${DISTRO_EXTRA_DEPENDS}" - -DISTRO_EXTRA_RDEPENDS ?= "" - -## This comment block is temporary, to be removed once SlugOS 5.0 stabilizes -##RDEPENDS += "\ -## kernel ixp4xx-npe \ -## base-files base-passwd netbase \ -## busybox initscripts-slugos slugos-init \ -## update-modules sysvinit tinylogin udev \ -## module-init-tools modutils-initscripts \ -## ipkg-collateral ipkg ipkg-link \ -## libgcc \ -## beep \ -## util-linux-mount \ -## util-linux-umount \ -## util-linux-swaponoff \ -## util-linux-losetup \ -## ${SLUGOS_STANDARD_RDEPENDS} \ -## ${DISTRO_EXTRA_RDEPENDS}" -## SlugOS 5.0 - original RDEPENDS above for reference; tinylogin and the -## util-linux-* utilities are now replaced by busybox tools. Also, ipkg -## is replaced by a trimmed-down version of opkg (no package signatures, -## and it uses the busybox wget command instead of libcurl - MJW -## SlugOS 5.0 - module-init-tools replaced by busybox as well - MJW -## SlugOS 5.2 - module-init-tools reinstated due to busybox bugs - MJW - -RDEPENDS += "\ - kernel ixp4xx-npe \ - base-files base-passwd netbase \ - busybox initscripts-slugos slugos-init \ - update-modules sysvinit udev \ - module-init-tools modutils-initscripts \ - opkg-collateral opkg-nogpg-nocurl \ - libgcc \ - beep \ - ${SLUGOS_STANDARD_RDEPENDS} \ - ${DISTRO_EXTRA_RDEPENDS}" - -DISTRO_EXTRA_RRECOMMENDS ?= "" -RRECOMMENDS += "\ - openssh \ - ${SLUGOS_STANDARD_RRECOMMENDS} \ - ${DISTRO_EXTRA_RRECOMMENDS}" |