diff options
Diffstat (limited to 'packages/linux')
25 files changed, 2426 insertions, 1326 deletions
diff --git a/packages/linux/linux-2.6.22.6/ts72xx/.mtn2git_empty b/packages/linux/linux-2.6.22.6/ts72xx/.mtn2git_empty deleted file mode 100644 index e69de29bb2..0000000000 --- a/packages/linux/linux-2.6.22.6/ts72xx/.mtn2git_empty +++ /dev/null diff --git a/packages/linux/linux-2.6.22.6/ts72xx/ep93xx-gpio-interrupt-debounce.diff b/packages/linux/linux-2.6.22.6/ts72xx/ep93xx-gpio-interrupt-debounce.diff deleted file mode 100644 index 27146c30f1..0000000000 --- a/packages/linux/linux-2.6.22.6/ts72xx/ep93xx-gpio-interrupt-debounce.diff +++ /dev/null @@ -1,87 +0,0 @@ - -Implement GPIO interrupt debouncing on ep93xx. - -Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> - -Index: linux-2.6.22/arch/arm/mach-ep93xx/core.c -=================================================================== ---- linux-2.6.22.orig/arch/arm/mach-ep93xx/core.c -+++ linux-2.6.22/arch/arm/mach-ep93xx/core.c -@@ -154,6 +154,7 @@ struct sys_timer ep93xx_timer = { - *************************************************************************/ - static unsigned char gpio_int_unmasked[3]; - static unsigned char gpio_int_enabled[3]; -+static unsigned char gpio_int_debounce[3]; - static unsigned char gpio_int_type1[3]; - static unsigned char gpio_int_type2[3]; - -@@ -161,16 +162,19 @@ static void update_gpio_int_params(int a - { - if (abf == 0) { - __raw_writeb(0, EP93XX_GPIO_A_INT_ENABLE); -+ __raw_writeb(gpio_int_debounce[0], EP93XX_GPIO_A_INT_DEBOUNCE); - __raw_writeb(gpio_int_type2[0], EP93XX_GPIO_A_INT_TYPE2); - __raw_writeb(gpio_int_type1[0], EP93XX_GPIO_A_INT_TYPE1); - __raw_writeb(gpio_int_unmasked[0] & gpio_int_enabled[0], EP93XX_GPIO_A_INT_ENABLE); - } else if (abf == 1) { - __raw_writeb(0, EP93XX_GPIO_B_INT_ENABLE); -+ __raw_writeb(gpio_int_debounce[1], EP93XX_GPIO_B_INT_DEBOUNCE); - __raw_writeb(gpio_int_type2[1], EP93XX_GPIO_B_INT_TYPE2); - __raw_writeb(gpio_int_type1[1], EP93XX_GPIO_B_INT_TYPE1); - __raw_writeb(gpio_int_unmasked[1] & gpio_int_enabled[1], EP93XX_GPIO_B_INT_ENABLE); - } else if (abf == 2) { - __raw_writeb(0, EP93XX_GPIO_F_INT_ENABLE); -+ __raw_writeb(gpio_int_debounce[2], EP93XX_GPIO_F_INT_DEBOUNCE); - __raw_writeb(gpio_int_type2[2], EP93XX_GPIO_F_INT_TYPE2); - __raw_writeb(gpio_int_type1[2], EP93XX_GPIO_F_INT_TYPE1); - __raw_writeb(gpio_int_unmasked[2] & gpio_int_enabled[2], EP93XX_GPIO_F_INT_ENABLE); -@@ -361,6 +365,13 @@ static int ep93xx_gpio_irq_type(unsigned - } else { - gpio_int_enabled[port] &= ~(1 << line); - } -+ -+ if (type & IRQ_TYPE_DEBOUNCE) { -+ gpio_int_debounce[port] |= 1 << line; -+ } else { -+ gpio_int_debounce[port] &= ~(1 << line); -+ } -+ - update_gpio_int_params(port); - - return 0; -Index: linux-2.6.22/include/asm-arm/arch-ep93xx/ep93xx-regs.h -=================================================================== ---- linux-2.6.22.orig/include/asm-arm/arch-ep93xx/ep93xx-regs.h -+++ linux-2.6.22/include/asm-arm/arch-ep93xx/ep93xx-regs.h -@@ -78,16 +78,19 @@ - #define EP93XX_GPIO_F_INT_ACK EP93XX_GPIO_REG(0x54) - #define EP93XX_GPIO_F_INT_ENABLE EP93XX_GPIO_REG(0x58) - #define EP93XX_GPIO_F_INT_STATUS EP93XX_GPIO_REG(0x5c) -+#define EP93XX_GPIO_F_INT_DEBOUNCE EP93XX_GPIO_REG(0x64) - #define EP93XX_GPIO_A_INT_TYPE1 EP93XX_GPIO_REG(0x90) - #define EP93XX_GPIO_A_INT_TYPE2 EP93XX_GPIO_REG(0x94) - #define EP93XX_GPIO_A_INT_ACK EP93XX_GPIO_REG(0x98) - #define EP93XX_GPIO_A_INT_ENABLE EP93XX_GPIO_REG(0x9c) - #define EP93XX_GPIO_A_INT_STATUS EP93XX_GPIO_REG(0xa0) -+#define EP93XX_GPIO_A_INT_DEBOUNCE EP93XX_GPIO_REG(0xa8) - #define EP93XX_GPIO_B_INT_TYPE1 EP93XX_GPIO_REG(0xac) - #define EP93XX_GPIO_B_INT_TYPE2 EP93XX_GPIO_REG(0xb0) - #define EP93XX_GPIO_B_INT_ACK EP93XX_GPIO_REG(0xb4) - #define EP93XX_GPIO_B_INT_ENABLE EP93XX_GPIO_REG(0xb8) - #define EP93XX_GPIO_B_INT_STATUS EP93XX_GPIO_REG(0xbc) -+#define EP93XX_GPIO_B_INT_DEBOUNCE EP93XX_GPIO_REG(0xc4) - - #define EP93XX_AAC_BASE (EP93XX_APB_VIRT_BASE + 0x00080000) - -Index: linux-2.6.22/include/linux/irq.h -=================================================================== ---- linux-2.6.22.orig/include/linux/irq.h -+++ linux-2.6.22/include/linux/irq.h -@@ -44,6 +44,7 @@ typedef void fastcall (*irq_flow_handler - #define IRQ_TYPE_LEVEL_LOW 0x00000008 /* Level low type */ - #define IRQ_TYPE_SENSE_MASK 0x0000000f /* Mask of the above */ - #define IRQ_TYPE_PROBE 0x00000010 /* Probing in progress */ -+#define IRQ_TYPE_DEBOUNCE 0x00000020 /* Enable HW debounce */ - - /* Internal flags */ - #define IRQ_INPROGRESS 0x00000100 /* IRQ handler active - do not enter! */ diff --git a/packages/linux/linux-2.6.22.6/ts72xx/ep93xx-i2c-bus.diff b/packages/linux/linux-2.6.22.6/ts72xx/ep93xx-i2c-bus.diff deleted file mode 100644 index d3c66940de..0000000000 --- a/packages/linux/linux-2.6.22.6/ts72xx/ep93xx-i2c-bus.diff +++ /dev/null @@ -1,220 +0,0 @@ - -I2C bus driver using ep93xx GPIOs. - -Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> - -Index: linux-2.6.22/drivers/i2c/busses/Kconfig -=================================================================== ---- linux-2.6.22.orig/drivers/i2c/busses/Kconfig 2007-08-30 00:42:45.000000000 +0200 -+++ linux-2.6.22/drivers/i2c/busses/Kconfig 2007-08-30 00:42:52.000000000 +0200 -@@ -635,4 +635,16 @@ - This driver can also be built as a module. If so, the module - will be called i2c-pnx. - -+config I2C_EP93XX -+ tristate "Cirrus Logic EP93XX GPIO-based I2C interface" -+ depends on I2C && ARCH_EP93XX -+ select I2C_ALGOBIT -+ help -+ Say Y here if you have an Cirrus Logic EP93XX based -+ system and are using GPIO lines for an I2C bus. -+ -+ This support is also available as a module. If so, the module -+ will be called i2c-ep93xx. -+ -+ - endmenu -Index: linux-2.6.22/drivers/i2c/busses/Makefile -=================================================================== ---- linux-2.6.22.orig/drivers/i2c/busses/Makefile 2007-08-30 00:42:45.000000000 +0200 -+++ linux-2.6.22/drivers/i2c/busses/Makefile 2007-08-30 00:42:52.000000000 +0200 -@@ -52,6 +52,7 @@ - obj-$(CONFIG_I2C_VOODOO3) += i2c-voodoo3.o - obj-$(CONFIG_SCx200_ACB) += scx200_acb.o - obj-$(CONFIG_SCx200_I2C) += scx200_i2c.o -+obj-$(CONFIG_I2C_EP93XX) += i2c-ep93xx.o - - ifeq ($(CONFIG_I2C_DEBUG_BUS),y) - EXTRA_CFLAGS += -DDEBUG -Index: linux-2.6.22/drivers/i2c/busses/i2c-ep93xx.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.22/drivers/i2c/busses/i2c-ep93xx.c 2007-08-30 00:42:52.000000000 +0200 -@@ -0,0 +1,159 @@ -+/* -+ * EP93XX I2C bus driver. -+ * Copyright (C) 2007 Lennert Buytenhek <buytenh@wantstofly.org> -+ * -+ * An I2C bus driver for the Cirrus Logic EP93xx SoC. -+ * -+ * Based on an earlier version by Alessandro Zummo. -+ */ -+ -+#include <linux/kernel.h> -+#include <linux/platform_device.h> -+#include <linux/module.h> -+#include <linux/i2c.h> -+#include <linux/i2c-algo-bit.h> -+#include <asm/hardware.h> -+#include <asm/arch/gpio.h> -+ -+struct ep93xx_i2c_priv { -+ struct ep93xx_i2c_data *data; -+ struct i2c_adapter adapter; -+ struct i2c_algo_bit_data algo_data; -+ int sda; -+ int scl; -+}; -+ -+ -+static void ep93xx_bit_setsda(void *cookie, int val) -+{ -+ struct ep93xx_i2c_priv *priv = cookie; -+ -+ if (val) { -+ gpio_line_config(priv->data->sda_pin, GPIO_IN); -+ if (priv->scl && !priv->sda && priv->data->stop != NULL) -+ priv->data->stop(priv->data->cookie); -+ priv->sda = 1; -+ } else { -+ if (priv->scl && priv->sda && priv->data->start != NULL) -+ priv->data->start(priv->data->cookie); -+ gpio_line_config(priv->data->sda_pin, GPIO_OUT); -+ gpio_line_set(priv->data->sda_pin, 0); -+ priv->sda = 0; -+ } -+} -+ -+static void ep93xx_bit_setscl(void *cookie, int val) -+{ -+ struct ep93xx_i2c_priv *priv = cookie; -+ -+ if (val) { -+ gpio_line_config(priv->data->scl_pin, GPIO_IN); -+ priv->scl = 1; -+ } else { -+ gpio_line_config(priv->data->scl_pin, GPIO_OUT); -+ gpio_line_set(priv->data->scl_pin, 0); -+ priv->scl = 0; -+ } -+} -+ -+static int ep93xx_bit_getsda(void *cookie) -+{ -+ struct ep93xx_i2c_priv *priv = cookie; -+ -+ if (priv->sda == 0) -+ BUG(); -+ -+ return gpio_line_get(priv->data->sda_pin); -+} -+ -+static int ep93xx_bit_getscl(void *cookie) -+{ -+ struct ep93xx_i2c_priv *priv = cookie; -+ -+ if (priv->scl == 0) -+ BUG(); -+ -+ return gpio_line_get(priv->data->scl_pin); -+} -+ -+ -+static int ep93xx_i2c_probe(struct platform_device *pdev) -+{ -+ struct ep93xx_i2c_priv *priv; -+ int err; -+ -+ priv = kzalloc(sizeof(struct ep93xx_i2c_priv), GFP_KERNEL); -+ if (priv == NULL) -+ return -ENOMEM; -+ -+ priv->data = pdev->dev.platform_data; -+ -+ strlcpy(priv->adapter.name, pdev->dev.driver->name, I2C_NAME_SIZE); -+ priv->adapter.algo_data = &priv->algo_data; -+ priv->adapter.class = I2C_CLASS_ALL; -+ priv->adapter.dev.parent = &pdev->dev; -+ -+ priv->algo_data.data = priv; -+ priv->algo_data.setsda = ep93xx_bit_setsda; -+ priv->algo_data.setscl = ep93xx_bit_setscl; -+ priv->algo_data.getsda = ep93xx_bit_getsda; -+ priv->algo_data.getscl = ep93xx_bit_getscl; -+ priv->algo_data.udelay = 10; -+ priv->algo_data.timeout = 100; -+ -+ priv->sda = 1; -+ gpio_line_config(priv->data->sda_pin, GPIO_IN); -+ -+ priv->scl = 1; -+ gpio_line_config(priv->data->scl_pin, GPIO_IN); -+ -+ err = i2c_bit_add_bus(&priv->adapter); -+ if (err) { -+ printk(KERN_ERR "ERROR: Could not install %s\n", -+ pdev->dev.bus_id); -+ kfree(priv); -+ return err; -+ } -+ -+ platform_set_drvdata(pdev, priv); -+ -+ return 0; -+} -+ -+static int ep93xx_i2c_remove(struct platform_device *pdev) -+{ -+ struct ep93xx_i2c_priv *priv; -+ -+ priv = platform_get_drvdata(pdev); -+ i2c_del_adapter(&priv->adapter); -+ platform_set_drvdata(pdev, NULL); -+ kfree(priv); -+ -+ return 0; -+} -+ -+static struct platform_driver ep93xx_i2c_driver = { -+ .probe = ep93xx_i2c_probe, -+ .remove = ep93xx_i2c_remove, -+ .driver = { -+ .name = "ep93xx-i2c", -+ .owner = THIS_MODULE, -+ }, -+}; -+ -+static int __init ep93xx_i2c_init(void) -+{ -+ return platform_driver_register(&ep93xx_i2c_driver); -+} -+ -+static void __exit ep93xx_i2c_exit(void) -+{ -+ platform_driver_unregister(&ep93xx_i2c_driver); -+} -+ -+module_init(ep93xx_i2c_init); -+module_exit(ep93xx_i2c_exit); -+ -+MODULE_AUTHOR("Lennert Buytenhek <buytenh@wantstofly.org>"); -+MODULE_DESCRIPTION("GPIO-based I2C adapter for EP93XX systems"); -+MODULE_LICENSE("GPL"); -Index: linux-2.6.22/include/asm-arm/arch-ep93xx/platform.h -=================================================================== ---- linux-2.6.22.orig/include/asm-arm/arch-ep93xx/platform.h 2007-08-30 00:42:45.000000000 +0200 -+++ linux-2.6.22/include/asm-arm/arch-ep93xx/platform.h 2007-08-30 00:42:52.000000000 +0200 -@@ -16,5 +16,13 @@ - unsigned char phy_id; - }; - -+struct ep93xx_i2c_data { -+ int sda_pin; -+ int scl_pin; -+ void *cookie; -+ void (*start)(void *); -+ void (*stop)(void *); -+}; -+ - - #endif diff --git a/packages/linux/linux-2.6.22.6/ts72xx/ep93xx-i2c.diff b/packages/linux/linux-2.6.22.6/ts72xx/ep93xx-i2c.diff deleted file mode 100644 index b68fb14e2e..0000000000 --- a/packages/linux/linux-2.6.22.6/ts72xx/ep93xx-i2c.diff +++ /dev/null @@ -1,110 +0,0 @@ - -Instantiate the ep93xx gpio i2c bus driver in the generic ep93xx -code. - -Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> - -Index: linux-2.6.22/arch/arm/mach-ep93xx/core.c -=================================================================== ---- linux-2.6.22.orig/arch/arm/mach-ep93xx/core.c 2007-08-30 00:42:49.000000000 +0200 -+++ linux-2.6.22/arch/arm/mach-ep93xx/core.c 2007-08-30 00:43:00.000000000 +0200 -@@ -509,6 +509,52 @@ - }; - - -+static DEFINE_MUTEX(eeclk_eedat_mutex); -+static int i2c_transaction_in_progress; -+ -+static void ep93xx_i2c_start_condition(void *cookie) -+{ -+ if (!i2c_transaction_in_progress) { -+ mutex_lock(&eeclk_eedat_mutex); -+ i2c_transaction_in_progress = 1; -+ } -+} -+ -+static void ep93xx_i2c_stop_condition(void *cookie) -+{ -+ if (i2c_transaction_in_progress) { -+ mutex_unlock(&eeclk_eedat_mutex); -+ i2c_transaction_in_progress = 0; -+ } else { -+ printk(KERN_WARNING "ep93xx: i2c stop without start??\n"); -+ } -+} -+ -+static struct ep93xx_i2c_data ep93xx_i2c_gpio_data = { -+ .sda_pin = EP93XX_GPIO_LINE_EEDAT, -+ .scl_pin = EP93XX_GPIO_LINE_EECLK, -+ .start = ep93xx_i2c_start_condition, -+ .stop = ep93xx_i2c_stop_condition, -+}; -+ -+static struct platform_device ep93xx_i2c_device = { -+ .name = "ep93xx-i2c", -+ .id = 0, -+ .dev.platform_data = &ep93xx_i2c_gpio_data, -+ .num_resources = 0, -+}; -+ -+void eeclk_eedat_claim(void) -+{ -+ mutex_lock(&eeclk_eedat_mutex); -+} -+ -+void eeclk_eedat_release(void) -+{ -+ mutex_unlock(&eeclk_eedat_mutex); -+} -+ -+ - void __init ep93xx_init_devices(void) - { - unsigned int v; -@@ -521,10 +567,20 @@ - __raw_writel(0xaa, EP93XX_SYSCON_SWLOCK); - __raw_writel(v, EP93XX_SYSCON_DEVICE_CONFIG); - -+ /* -+ * When EECLK/EEDAT are in open drain mode (EEDRIVE=0b11), -+ * writing a 1 to their Data Register bits causes subsequent -+ * reads from the Data Direction Register to return 'input', -+ * which confuses gpio_line_config(). So, we use CMOS drive -+ * mode instead. -+ */ -+ __raw_writel(0, EP93XX_GPIO_EEDRIVE); -+ - amba_device_register(&uart1_device, &iomem_resource); - amba_device_register(&uart2_device, &iomem_resource); - amba_device_register(&uart3_device, &iomem_resource); - - platform_device_register(&ep93xx_rtc_device); - platform_device_register(&ep93xx_ohci_device); -+ platform_device_register(&ep93xx_i2c_device); - } -Index: linux-2.6.22/include/asm-arm/arch-ep93xx/ep93xx-regs.h -=================================================================== ---- linux-2.6.22.orig/include/asm-arm/arch-ep93xx/ep93xx-regs.h 2007-08-30 00:42:49.000000000 +0200 -+++ linux-2.6.22/include/asm-arm/arch-ep93xx/ep93xx-regs.h 2007-08-30 00:43:00.000000000 +0200 -@@ -91,6 +91,7 @@ - #define EP93XX_GPIO_B_INT_ENABLE EP93XX_GPIO_REG(0xb8) - #define EP93XX_GPIO_B_INT_STATUS EP93XX_GPIO_REG(0xbc) - #define EP93XX_GPIO_B_INT_DEBOUNCE EP93XX_GPIO_REG(0xc4) -+#define EP93XX_GPIO_EEDRIVE EP93XX_GPIO_REG(0xc8) - - #define EP93XX_AAC_BASE (EP93XX_APB_VIRT_BASE + 0x00080000) - -Index: linux-2.6.22/include/asm-arm/arch-ep93xx/platform.h -=================================================================== ---- linux-2.6.22.orig/include/asm-arm/arch-ep93xx/platform.h 2007-08-30 00:42:52.000000000 +0200 -+++ linux-2.6.22/include/asm-arm/arch-ep93xx/platform.h 2007-08-30 00:43:00.000000000 +0200 -@@ -10,6 +10,9 @@ - void ep93xx_init_devices(void); - extern struct sys_timer ep93xx_timer; - -+void eeclk_eedat_claim(void); -+void eeclk_eedat_release(void); -+ - struct ep93xx_eth_data - { - unsigned char dev_addr[6]; diff --git a/packages/linux/linux-2.6.22.6/ts72xx/ep93xx-leds.diff b/packages/linux/linux-2.6.22.6/ts72xx/ep93xx-leds.diff deleted file mode 100644 index 0d11311d10..0000000000 --- a/packages/linux/linux-2.6.22.6/ts72xx/ep93xx-leds.diff +++ /dev/null @@ -1,181 +0,0 @@ - -EP93xx leds driver - -Signed-off-by: Petr Stetiar <ynezz@true.cz> - -Index: linux-2.6.22/arch/arm/mach-ep93xx/core.c -=================================================================== ---- linux-2.6.22.orig/arch/arm/mach-ep93xx/core.c -+++ linux-2.6.22/arch/arm/mach-ep93xx/core.c -@@ -555,6 +555,12 @@ void eeclk_eedat_release(void) - } - - -+static struct platform_device ep93xx_led_device = { -+ .name = "ep93xx-led", -+ .id = -1, -+}; -+ -+ - void __init ep93xx_init_devices(void) - { - unsigned int v; -@@ -583,4 +589,5 @@ void __init ep93xx_init_devices(void) - platform_device_register(&ep93xx_rtc_device); - platform_device_register(&ep93xx_ohci_device); - platform_device_register(&ep93xx_i2c_device); -+ platform_device_register(&ep93xx_led_device); - } -Index: linux-2.6.22/drivers/leds/Kconfig -=================================================================== ---- linux-2.6.22.orig/drivers/leds/Kconfig -+++ linux-2.6.22/drivers/leds/Kconfig -@@ -95,6 +95,12 @@ config LEDS_COBALT - help - This option enables support for the front LED on Cobalt Server - -+config LEDS_EP93XX -+ tristate "LED Support for Cirrus Logic EP93xx" -+ depends on LEDS_CLASS && ARCH_EP93XX -+ help -+ This option enables support for the Cirrus Logic EP93xx based boards. -+ - comment "LED Triggers" - - config LEDS_TRIGGERS -Index: linux-2.6.22/drivers/leds/Makefile -=================================================================== ---- linux-2.6.22.orig/drivers/leds/Makefile -+++ linux-2.6.22/drivers/leds/Makefile -@@ -16,6 +16,7 @@ obj-$(CONFIG_LEDS_NET48XX) += leds-net4 - obj-$(CONFIG_LEDS_WRAP) += leds-wrap.o - obj-$(CONFIG_LEDS_H1940) += leds-h1940.o - obj-$(CONFIG_LEDS_COBALT) += leds-cobalt.o -+obj-$(CONFIG_LEDS_EP93XX) += leds-ep93xx.o - - # LED Triggers - obj-$(CONFIG_LEDS_TRIGGER_TIMER) += ledtrig-timer.o -Index: linux-2.6.22/drivers/leds/leds-ep93xx.c -=================================================================== ---- /dev/null -+++ linux-2.6.22/drivers/leds/leds-ep93xx.c -@@ -0,0 +1,119 @@ -+/* -+ * LEDs driver for Cirrus Logic EP93xx -+ * -+ * Author: Petr Stetiar <ynezz@true.cz> -+ * -+ * Based on leds-corgi.c by Richard Purdie -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ * -+ */ -+ -+#include <linux/kernel.h> -+#include <linux/init.h> -+#include <linux/platform_device.h> -+#include <linux/leds.h> -+#include <asm/mach-types.h> -+#include <asm/arch/hardware.h> -+#include <asm/arch/gpio.h> -+ -+static void ep93xx_green_led_set(struct led_classdev *led_cdev, enum led_brightness value) -+{ -+ if (value) -+ gpio_line_set(EP93XX_GPIO_LINE_GRLED, EP93XX_GPIO_HIGH); -+ else -+ gpio_line_set(EP93XX_GPIO_LINE_GRLED, EP93XX_GPIO_LOW); -+} -+ -+static void ep93xx_red_led_set(struct led_classdev *led_cdev, enum led_brightness value) -+{ -+ if (value) -+ gpio_line_set(EP93XX_GPIO_LINE_RDLED, EP93XX_GPIO_HIGH); -+ else -+ gpio_line_set(EP93XX_GPIO_LINE_RDLED, EP93XX_GPIO_LOW); -+} -+ -+ -+static struct led_classdev ep93xx_green_led = { -+ .name = "ep93xx:green", -+ .default_trigger = "none", -+ .brightness_set = ep93xx_green_led_set, -+}; -+ -+static struct led_classdev ep93xx_red_led = { -+ .name = "ep93xx:red", -+ .default_trigger = "heartbeat", -+ .brightness_set = ep93xx_red_led_set, -+}; -+ -+#ifdef CONFIG_PM -+static int ep93xx_led_suspend(struct platform_device *dev, pm_message_t state) -+{ -+ led_classdev_suspend(&ep93xx_green_led); -+ led_classdev_suspend(&ep93xx_red_led); -+ return 0; -+} -+ -+static int ep93xx_led_resume(struct platform_device *dev) -+{ -+ led_classdev_resume(&ep93xx_red_led); -+ led_classdev_resume(&ep93xx_green_led); -+ return 0; -+} -+#endif -+ -+static int ep93xx_led_probe(struct platform_device *pdev) -+{ -+ int ret; -+ -+ gpio_line_config(EP93XX_GPIO_LINE_GRLED, GPIO_OUT); -+ gpio_line_config(EP93XX_GPIO_LINE_RDLED, GPIO_OUT); -+ -+ ret = led_classdev_register(&pdev->dev, &ep93xx_green_led); -+ if (ret < 0) -+ return ret; -+ -+ ret = led_classdev_register(&pdev->dev, &ep93xx_red_led); -+ if (ret < 0) -+ led_classdev_unregister(&ep93xx_green_led); -+ -+ return ret; -+} -+ -+static int ep93xx_led_remove(struct platform_device *pdev) -+{ -+ led_classdev_unregister(&ep93xx_green_led); -+ led_classdev_unregister(&ep93xx_red_led); -+ return 0; -+} -+ -+static struct platform_driver ep93xx_led_driver = { -+ .probe = ep93xx_led_probe, -+ .remove = ep93xx_led_remove, -+#ifdef CONFIG_PM -+ .suspend = ep93xx_led_suspend, -+ .resume = ep93xx_led_resume, -+#endif -+ .driver = { -+ .name = "ep93xx-led", -+ }, -+}; -+ -+static int __init ep93xx_led_init(void) -+{ -+ return platform_driver_register(&ep93xx_led_driver); -+} -+ -+static void __exit ep93xx_led_exit(void) -+{ -+ platform_driver_unregister(&ep93xx_led_driver); -+} -+ -+module_init(ep93xx_led_init); -+module_exit(ep93xx_led_exit); -+ -+MODULE_AUTHOR("Petr Stetiar <ynezz@true.cz>"); -+MODULE_DESCRIPTION("Cirrus Logic EP93xx LED driver"); -+MODULE_LICENSE("GPL"); diff --git a/packages/linux/linux-2.6.22.6/ts72xx/ep93xx-maverick-uniqid.patch b/packages/linux/linux-2.6.22.6/ts72xx/ep93xx-maverick-uniqid.patch deleted file mode 100644 index fb6c8cfe18..0000000000 --- a/packages/linux/linux-2.6.22.6/ts72xx/ep93xx-maverick-uniqid.patch +++ /dev/null @@ -1,38 +0,0 @@ - -Adds support for SoC's unique ID (Maverick Key) in /proc/cpuinfo - -Signed-off-by: Petr Stetiar <ynezz@true.cz> - -Index: linux-2.6.22/arch/arm/kernel/setup.c -=================================================================== ---- linux-2.6.22.orig/arch/arm/kernel/setup.c 2007-09-02 23:08:51.000000000 +0200 -+++ linux-2.6.22/arch/arm/kernel/setup.c 2007-09-02 23:10:24.000000000 +0200 -@@ -959,8 +959,15 @@ - - seq_printf(m, "Hardware\t: %s\n", machine_name); - seq_printf(m, "Revision\t: %04x\n", system_rev); -+ -+#if defined(CONFIG_ARCH_EP93XX) -+#include <asm/arch/ep93xx-regs.h> -+ seq_printf(m, "Serial\t\t: %016x\n", -+ *((unsigned int *)EP93XX_SECURITY_UNIQID)); -+#else - seq_printf(m, "Serial\t\t: %08x%08x\n", - system_serial_high, system_serial_low); -+#endif - - return 0; - } -Index: linux-2.6.22/include/asm-arm/arch-ep93xx/ep93xx-regs.h -=================================================================== ---- linux-2.6.22.orig/include/asm-arm/arch-ep93xx/ep93xx-regs.h 2007-09-02 23:06:45.000000000 +0200 -+++ linux-2.6.22/include/asm-arm/arch-ep93xx/ep93xx-regs.h 2007-09-02 23:08:34.000000000 +0200 -@@ -70,6 +70,8 @@ - #define EP93XX_I2S_BASE (EP93XX_APB_VIRT_BASE + 0x00020000) - - #define EP93XX_SECURITY_BASE (EP93XX_APB_VIRT_BASE + 0x00030000) -+#define EP93XX_SECURITY_REG(x) (EP93XX_SECURITY_BASE + (x)) -+#define EP93XX_SECURITY_UNIQID EP93XX_SECURITY_REG(0x2440) - - #define EP93XX_GPIO_BASE (EP93XX_APB_VIRT_BASE + 0x00040000) - #define EP93XX_GPIO_REG(x) (EP93XX_GPIO_BASE + (x)) diff --git a/packages/linux/linux-2.6.22.6/ts72xx/ep93xx-serial-clocks.diff b/packages/linux/linux-2.6.22.6/ts72xx/ep93xx-serial-clocks.diff deleted file mode 100644 index 9eb2d9de98..0000000000 --- a/packages/linux/linux-2.6.22.6/ts72xx/ep93xx-serial-clocks.diff +++ /dev/null @@ -1,42 +0,0 @@ - -Hackishly enable all UART clocks before uncompressing the kernel, -so that using ttyAM1 or ttyAM2 as console can work. - -Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> - -Index: linux-2.6.22/include/asm-arm/arch-ep93xx/uncompress.h -=================================================================== ---- linux-2.6.22.orig/include/asm-arm/arch-ep93xx/uncompress.h -+++ linux-2.6.22/include/asm-arm/arch-ep93xx/uncompress.h -@@ -78,6 +78,23 @@ static void ethernet_reset(void) - - - /* -+ * We don't have clock management for the UARTs (amba-pl010) -+ * yet, so hackily enable all UART clocks here for now. -+ */ -+#define PHYS_SYSCON_DEVICE_CONFIG 0x80930080 -+#define PHYS_SYSCON_SWLOCK 0x809300c0 -+ -+static void enable_all_uart_clocks(void) -+{ -+ unsigned int v; -+ -+ v = __raw_readl(PHYS_SYSCON_DEVICE_CONFIG); -+ __raw_writel(0xaa, PHYS_SYSCON_SWLOCK); -+ __raw_writel(v | 0x01140000, PHYS_SYSCON_DEVICE_CONFIG); -+} -+ -+ -+/* - * Some bootloaders don't turn on the UARTBAUD bit, which means that - * the UARTs will be running off a divided 7.3728 MHz clock instead of - * the 14.7456 MHz peripheral clock when linux boots. -@@ -126,6 +143,7 @@ static void fix_uart_base(void) - static void arch_decomp_setup(void) - { - ethernet_reset(); -+ enable_all_uart_clocks(); - fix_uart_base(); - } - diff --git a/packages/linux/linux-2.6.22.6/ts72xx/ep93xx-serial-uartbaud.diff b/packages/linux/linux-2.6.22.6/ts72xx/ep93xx-serial-uartbaud.diff deleted file mode 100644 index 7183ab626e..0000000000 --- a/packages/linux/linux-2.6.22.6/ts72xx/ep93xx-serial-uartbaud.diff +++ /dev/null @@ -1,66 +0,0 @@ - -Force UARTBAUD on before uncompressing. - -Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> - -Index: linux-2.6.22/include/asm-arm/arch-ep93xx/uncompress.h -=================================================================== ---- linux-2.6.22.orig/include/asm-arm/arch-ep93xx/uncompress.h -+++ linux-2.6.22/include/asm-arm/arch-ep93xx/uncompress.h -@@ -77,9 +77,56 @@ static void ethernet_reset(void) - } - - -+/* -+ * Some bootloaders don't turn on the UARTBAUD bit, which means that -+ * the UARTs will be running off a divided 7.3728 MHz clock instead of -+ * the 14.7456 MHz peripheral clock when linux boots. -+ * -+ * We detect that condition here and fix it by turning on UARTBAUD, and -+ * then reprogramming the divisors on all enabled UARTs to twice what -+ * they were before we turned UARTBAUD on, to preserve the programmed -+ * baud rate. -+ */ -+#define PHYS_SYSCON_CLOCK_CONTROL 0x80930004 -+#define SYSCON_CLOCK_UARTBAUD 0x20000000 -+#define PHYS_UART1_BASE 0x808c0000 -+#define PHYS_UART2_BASE 0x808d0000 -+#define PHYS_UART3_BASE 0x808e0000 -+ -+static void uart_divisor_times_two(unsigned int base) -+{ -+ u16 divisor; -+ -+ divisor = __raw_readb(base + 0x0c) << 8; -+ divisor |= __raw_readb(base + 0x10); -+ if (divisor) { -+ divisor = (2 * (divisor + 1)) - 1; -+ __raw_writeb(divisor >> 8, base + 0x0c); -+ __raw_writeb(divisor & 0xff, base + 0x10); -+ __raw_writeb(__raw_readb(base + 0x08), base + 0x08); -+ } -+} -+ -+static void fix_uart_base(void) -+{ -+ unsigned int v; -+ -+ v = __raw_readl(PHYS_SYSCON_CLOCK_CONTROL); -+ if ((v & SYSCON_CLOCK_UARTBAUD) == 0) { -+ v |= SYSCON_CLOCK_UARTBAUD; -+ __raw_writel(v, PHYS_SYSCON_CLOCK_CONTROL); -+ -+ uart_divisor_times_two(PHYS_UART1_BASE); -+ uart_divisor_times_two(PHYS_UART2_BASE); -+ uart_divisor_times_two(PHYS_UART3_BASE); -+ } -+} -+ -+ - static void arch_decomp_setup(void) - { - ethernet_reset(); -+ fix_uart_base(); - } - - #define arch_decomp_wdog() diff --git a/packages/linux/linux-2.6.22.6/ts72xx/ep93xx-timer-accuracy.diff b/packages/linux/linux-2.6.22.6/ts72xx/ep93xx-timer-accuracy.diff deleted file mode 100644 index 8254153b69..0000000000 --- a/packages/linux/linux-2.6.22.6/ts72xx/ep93xx-timer-accuracy.diff +++ /dev/null @@ -1,59 +0,0 @@ - -The ep93xx has a weird timer tick base (983.04 kHz.) This experimental -patch tries to increase time of day accuracy by keeping the number of -ticks until the next jiffy in a fractional value representation. - -Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> - -Index: linux-2.6.22/arch/arm/mach-ep93xx/core.c -=================================================================== ---- linux-2.6.22.orig/arch/arm/mach-ep93xx/core.c -+++ linux-2.6.22/arch/arm/mach-ep93xx/core.c -@@ -94,19 +94,32 @@ void __init ep93xx_map_io(void) - * track of lost jiffies. - */ - static unsigned int last_jiffy_time; -+static unsigned int next_jiffy_time; -+static unsigned int accumulator; - --#define TIMER4_TICKS_PER_JIFFY ((CLOCK_TICK_RATE + (HZ/2)) / HZ) -+#define TIMER4_TICKS_PER_JIFFY (983040 / HZ) -+#define TIMER4_TICKS_MOD_JIFFY (983040 % HZ) -+ -+static int after_eq(unsigned long a, unsigned long b) -+{ -+ return ((signed long)(a - b)) >= 0; -+} - - static int ep93xx_timer_interrupt(int irq, void *dev_id) - { - write_seqlock(&xtime_lock); - - __raw_writel(1, EP93XX_TIMER1_CLEAR); -- while ((signed long) -- (__raw_readl(EP93XX_TIMER4_VALUE_LOW) - last_jiffy_time) -- >= TIMER4_TICKS_PER_JIFFY) { -- last_jiffy_time += TIMER4_TICKS_PER_JIFFY; -+ while (after_eq(__raw_readl(EP93XX_TIMER4_VALUE_LOW), next_jiffy_time)) { - timer_tick(); -+ -+ last_jiffy_time = next_jiffy_time; -+ next_jiffy_time += TIMER4_TICKS_PER_JIFFY; -+ accumulator += TIMER4_TICKS_MOD_JIFFY; -+ if (accumulator >= HZ) { -+ next_jiffy_time++; -+ accumulator -= HZ; -+ } - } - - write_sequnlock(&xtime_lock); -Index: linux-2.6.22/include/asm-arm/arch-ep93xx/timex.h -=================================================================== ---- linux-2.6.22.orig/include/asm-arm/arch-ep93xx/timex.h -+++ linux-2.6.22/include/asm-arm/arch-ep93xx/timex.h -@@ -2,4 +2,4 @@ - * linux/include/asm-arm/arch-ep93xx/timex.h - */ - --#define CLOCK_TICK_RATE 983040 -+#define CLOCK_TICK_RATE (1000 * HZ) diff --git a/packages/linux/linux-2.6.22.6/ts72xx/series b/packages/linux/linux-2.6.22.6/ts72xx/series deleted file mode 100644 index e5455efd3c..0000000000 --- a/packages/linux/linux-2.6.22.6/ts72xx/series +++ /dev/null @@ -1,12 +0,0 @@ -ep93xx-gpio-interrupt-debounce.diff -ep93xx-i2c-bus.diff -ep93xx-i2c.diff -ep93xx-leds.diff -ep93xx-serial-uartbaud.diff -ep93xx-serial-clocks.diff -ep93xx-timer-accuracy.diff -ep93xx-maverick-uniqid.patch -ts72xx-machine-id-fix.patch -ts72xx-nfbit-fix.patch -ts72xx-watchdog.patch -ts72xx-use-cpld-reset.patch diff --git a/packages/linux/linux-2.6.22.6/ts72xx/ts72xx-machine-id-fix.patch b/packages/linux/linux-2.6.22.6/ts72xx/ts72xx-machine-id-fix.patch deleted file mode 100644 index 64c38398db..0000000000 --- a/packages/linux/linux-2.6.22.6/ts72xx/ts72xx-machine-id-fix.patch +++ /dev/null @@ -1,17 +0,0 @@ - -Fix wrong machine ID passed from RedBoot - -Signed-off-by: Petr Stetiar <ynezz@true.cz> - -Index: linux-2.6.22/arch/arm/kernel/head.S -=================================================================== ---- linux-2.6.22.orig/arch/arm/kernel/head.S 2007-08-30 00:42:45.000000000 +0200 -+++ linux-2.6.22/arch/arm/kernel/head.S 2007-08-30 00:43:13.000000000 +0200 -@@ -82,6 +82,7 @@ - bl __lookup_processor_type @ r5=procinfo r9=cpuid - movs r10, r5 @ invalid processor (r5=0)? - beq __error_p @ yes, error 'p' -+ ldr r1, =0x000002a1 @ mach-type = TS-7250 - bl __lookup_machine_type @ r5=machinfo - movs r8, r5 @ invalid machine (r5=0)? - beq __error_a @ yes, error 'a' diff --git a/packages/linux/linux-2.6.22.6/ts72xx/ts72xx-nfbit-fix.patch b/packages/linux/linux-2.6.22.6/ts72xx/ts72xx-nfbit-fix.patch deleted file mode 100644 index eab73154a8..0000000000 --- a/packages/linux/linux-2.6.22.6/ts72xx/ts72xx-nfbit-fix.patch +++ /dev/null @@ -1,15 +0,0 @@ - -Force the nF bit on. Usually this is set by the bootrom. If it is not set, -then the CPU core will run from HCLK instead of FCLK, and performance will -suffer. If you see BogoMIPS of about 1/4 of your CPU clock, try turning this -on; your performance should double. - ---- linux-2.6.21.4/arch/arm/mm/proc-arm920.S 2007-06-07 23:27:31.000000000 +0200 -+++ linux-2.6.21.4-arm/arch/arm/mm/proc-arm920.S 2007-06-08 22:59:48.000000000 +0200 -@@ -395,6 +395,7 @@ - mrc p15, 0, r0, c1, c0 @ get control register v4 - bic r0, r0, r5 - orr r0, r0, r6 -+ orr r0, r0, #0x40000000 - mov pc, lr - .size __arm920_setup, . - __arm920_setup diff --git a/packages/linux/linux-2.6.22.6/ts72xx/ts72xx-use-cpld-reset.patch b/packages/linux/linux-2.6.22.6/ts72xx/ts72xx-use-cpld-reset.patch deleted file mode 100644 index 9744a67653..0000000000 --- a/packages/linux/linux-2.6.22.6/ts72xx/ts72xx-use-cpld-reset.patch +++ /dev/null @@ -1,41 +0,0 @@ - -Use CPLD watchdog to reset the machine instead of buggy ep93xx one, which -sometimes get stuck... - -Signed-off-by: Petr Stetiar <ynezz@true.cz> - -Index: linux-2.6.22/include/asm-arm/arch-ep93xx/system.h -=================================================================== ---- linux-2.6.22.orig/include/asm-arm/arch-ep93xx/system.h 2007-08-30 00:53:47.000000000 +0200 -+++ linux-2.6.22/include/asm-arm/arch-ep93xx/system.h 2007-08-30 00:54:28.000000000 +0200 -@@ -3,6 +3,7 @@ - */ - - #include <asm/hardware.h> -+#include <asm/mach-types.h> - - static inline void arch_idle(void) - { -@@ -15,11 +16,17 @@ - - local_irq_disable(); - -- devicecfg = __raw_readl(EP93XX_SYSCON_DEVICE_CONFIG); -- __raw_writel(0xaa, EP93XX_SYSCON_SWLOCK); -- __raw_writel(devicecfg | 0x80000000, EP93XX_SYSCON_DEVICE_CONFIG); -- __raw_writel(0xaa, EP93XX_SYSCON_SWLOCK); -- __raw_writel(devicecfg & ~0x80000000, EP93XX_SYSCON_DEVICE_CONFIG); -+ if (machine_is_ts72xx()) { -+ __raw_writeb(0x5, TS72XX_WATCHDOG_FEED_PHYS_BASE); -+ __raw_writeb(0x1, TS72XX_WATCHDOG_CONTROL_PHYS_BASE); -+ } else { -+ devicecfg = __raw_readl(EP93XX_SYSCON_DEVICE_CONFIG); -+ __raw_writel(0xaa, EP93XX_SYSCON_SWLOCK); -+ __raw_writel(devicecfg | 0x80000000, EP93XX_SYSCON_DEVICE_CONFIG); -+ __raw_writel(0xaa, EP93XX_SYSCON_SWLOCK); -+ __raw_writel(devicecfg & ~0x80000000, EP93XX_SYSCON_DEVICE_CONFIG); -+ } -+ - - while (1) - ; diff --git a/packages/linux/linux-2.6.22.6/ts72xx/ts72xx-watchdog.patch b/packages/linux/linux-2.6.22.6/ts72xx/ts72xx-watchdog.patch deleted file mode 100644 index aa2cb834f9..0000000000 --- a/packages/linux/linux-2.6.22.6/ts72xx/ts72xx-watchdog.patch +++ /dev/null @@ -1,430 +0,0 @@ - -TS-72xx watchdog driver - -Signed-off-by: Matthieu Crapet <mcrapet@gmail.com> - -Index: linux-2.6.22/arch/arm/mach-ep93xx/ts72xx.c -=================================================================== ---- linux-2.6.22.orig/arch/arm/mach-ep93xx/ts72xx.c 2007-08-30 01:33:00.000000000 +0200 -+++ linux-2.6.22/arch/arm/mach-ep93xx/ts72xx.c 2007-08-30 01:33:10.000000000 +0200 -@@ -183,6 +183,26 @@ - .resource = ts72xx_eth_resource, - }; - -+static struct resource ts72xx_watchdog_resources[] = { -+ [0] = { -+ .start = TS72XX_WATCHDOG_CONTROL_PHYS_BASE, -+ .end = TS72XX_WATCHDOG_CONTROL_PHYS_BASE + 0x0fff, -+ .flags = IORESOURCE_MEM, -+ }, -+ [1] = { -+ .start = TS72XX_WATCHDOG_FEED_PHYS_BASE, -+ .end = TS72XX_WATCHDOG_FEED_PHYS_BASE + 0x0fff, -+ .flags = IORESOURCE_MEM, -+ }, -+}; -+ -+static struct platform_device ts72xx_watchdog_device = { -+ .name = "ts72xx_wdt", -+ .id = -1, -+ .num_resources = ARRAY_SIZE(ts72xx_watchdog_resources), -+ .resource = ts72xx_watchdog_resources, -+}; -+ - static void __init ts72xx_init_machine(void) - { - ep93xx_init_devices(); -@@ -193,6 +213,7 @@ - memcpy(ts72xx_eth_data.dev_addr, - (void *)(EP93XX_ETHERNET_BASE + 0x50), 6); - platform_device_register(&ts72xx_eth_device); -+ platform_device_register(&ts72xx_watchdog_device); - } - - MACHINE_START(TS72XX, "Technologic Systems TS-72xx SBC") -Index: linux-2.6.22/drivers/char/watchdog/Kconfig -=================================================================== ---- linux-2.6.22.orig/drivers/char/watchdog/Kconfig 2007-08-30 01:33:00.000000000 +0200 -+++ linux-2.6.22/drivers/char/watchdog/Kconfig 2007-08-30 01:33:10.000000000 +0200 -@@ -187,6 +187,18 @@ - - Say N if you are unsure. - -+config TS72XX_WATCHDOG -+ tristate "TS-72xx Watchdog" -+ depends on WATCHDOG && ARCH_EP93XX && MACH_TS72XX -+ help -+ Say Y here if to include support for the CPLD watchdog -+ included on Technologic Systems SBC. -+ -+ NOTE: timeout value is given in milliseconds, not in seconds. -+ -+ To compile this driver as a module, choose M here: the -+ module will be called ts72xx_wdt. -+ - # X86 (i386 + ia64 + x86_64) Architecture - - config ACQUIRE_WDT -Index: linux-2.6.22/drivers/char/watchdog/Makefile -=================================================================== ---- linux-2.6.22.orig/drivers/char/watchdog/Makefile 2007-08-30 01:33:00.000000000 +0200 -+++ linux-2.6.22/drivers/char/watchdog/Makefile 2007-08-30 01:33:10.000000000 +0200 -@@ -34,6 +34,7 @@ - obj-$(CONFIG_SA1100_WATCHDOG) += sa1100_wdt.o - obj-$(CONFIG_MPCORE_WATCHDOG) += mpcore_wdt.o - obj-$(CONFIG_EP93XX_WATCHDOG) += ep93xx_wdt.o -+obj-$(CONFIG_TS72XX_WATCHDOG) += ts72xx_wdt.o - obj-$(CONFIG_PNX4008_WATCHDOG) += pnx4008_wdt.o - - # X86 (i386 + ia64 + x86_64) Architecture -Index: linux-2.6.22/drivers/char/watchdog/ts72xx_wdt.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.22/drivers/char/watchdog/ts72xx_wdt.c 2007-08-30 01:33:10.000000000 +0200 -@@ -0,0 +1,332 @@ -+/* -+ * TS-72xx Watchdog Driver for Technologic Systems boards. -+ * -+ * Based on ep93xx_wdt.c by Lehtiniemi <rayl@mail.com> & -+ * Alessandro Zummo <a.zummo@towertech.it> -+ * and ib700wdt.c by Charles Howes <chowes@vsol.net> -+ * and mpc83xx_wdt.c by Dave Updegraff <dave@cray.org> & -+ * Kumar Gala <galak@kernel.crashing.org> -+ * -+ * (c) Copyright 2006 Matthieu Crapet <mcrapet@gmail.com> -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License -+ * as published by the Free Software Foundation; either version -+ * 2 of the License, or (at your option) any later version. -+ * -+ * This driver only deals with native timeout provided by CPLD : -+ * 1/4s, 1/2s, 1s, 2s, 4s and 8s. No external timer is used. -+ * Notice that we must ping before modifying the control register. -+ */ -+ -+#include <linux/module.h> -+#include <linux/moduleparam.h> -+#include <linux/types.h> -+#include <linux/kernel.h> -+#include <linux/fs.h> -+#include <linux/miscdevice.h> -+#include <linux/platform_device.h> -+#include <linux/init.h> -+#include <linux/watchdog.h> -+#include <asm/io.h> -+#include <asm/uaccess.h> -+#include <asm/system.h> -+#include <asm/mach-types.h> -+ -+#define WATCHDOG_VERSION "0.2" -+#define PFX "ts72xx_wdt: " -+ -+#define WATCHDOG_TIMEOUT 8000 /* 8 seconds */ -+#define WDT_IN_USE 0 -+#define WDT_OK_TO_CLOSE 1 -+ -+static unsigned long ts72xx_wdt_status; -+static unsigned char ts72xx_wdt_cpld_value = 0x7; -+static int nowayout = WATCHDOG_NOWAYOUT; -+static int timeout = WATCHDOG_TIMEOUT; -+ -+static int ts72xx_wdt_times[12] = { -+ 6000, 3000, 1500, 750, 275, 0, -+ 8000, 4000, 2000, 1000, 500, 250 -+}; -+ -+static void __iomem *control_register; -+static void __iomem *feed_register; -+ -+ -+/* -+ * Kernel methods. -+ */ -+ -+static inline void ts72xx_wdt_ping(void) -+{ -+ __raw_writew(0x05, feed_register); -+} -+ -+static inline void ts72xx_wdt_enable(void) -+{ -+ __raw_writew(0x05, feed_register); -+ __raw_writew(ts72xx_wdt_cpld_value, control_register); -+} -+ -+static inline void ts72xx_wdt_disable(void) -+{ -+ __raw_writew(0x05, feed_register); -+ __raw_writew(0, control_register); -+} -+ -+static inline void ts72xx_parse_timeout(int value) -+{ -+ unsigned char cpld_value = 0x7; -+ int i; -+ -+ if ((value > 8000) || (value < 250)) { -+ timeout = WATCHDOG_TIMEOUT; -+ printk(KERN_INFO PFX "Timeout value out of range, set to %d\n", timeout); -+ } else { -+ for (i = 0; i < 6; i++) { -+ if (value >= ts72xx_wdt_times[i]) { -+ timeout = ts72xx_wdt_times[i+6]; -+ -+ if (value != timeout) -+ printk(KERN_INFO PFX "Timeout value rounded to %d\n", timeout); -+ -+ if (i >= 3) /* cpld_value can't be 4 */ -+ i++; -+ -+ cpld_value = 7 - i; -+ break; -+ } -+ } -+ } -+ -+ ts72xx_wdt_cpld_value = cpld_value; -+} -+ -+static ssize_t ts72xx_wdt_write(struct file *file, const char __user *buf, -+ size_t count, loff_t *ppos) -+{ -+ /* Can't seek (pwrite) on this device */ -+ if (*ppos != file->f_pos) -+ return -ESPIPE; -+ -+ if (count) { -+ if (!nowayout) { -+ size_t i; -+ -+ clear_bit(WDT_OK_TO_CLOSE, &ts72xx_wdt_status); -+ -+ for (i = 0; i != count; i++) { -+ char c; -+ -+ if (get_user(c, buf + i)) -+ return -EFAULT; -+ -+ if (c == 'V') -+ set_bit(WDT_OK_TO_CLOSE, &ts72xx_wdt_status); -+ else -+ clear_bit(WDT_OK_TO_CLOSE, &ts72xx_wdt_status); -+ } -+ } -+ ts72xx_wdt_ping(); -+ } -+ -+ return count; -+} -+ -+static int ts72xx_wdt_ioctl(struct inode *inode, struct file *file, -+ unsigned int cmd, unsigned long arg) -+{ -+ int new_margin; -+ int ret = -ENOIOCTLCMD; -+ -+ static struct watchdog_info ident = { -+ .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE, -+ .firmware_version = 1, -+ .identity = "TS-72xx Watchdog", -+ }; -+ -+ switch (cmd) { -+ case WDIOC_GETSUPPORT: -+ ret = copy_to_user((struct watchdog_info __user *)arg, &ident, -+ sizeof(ident)) ? -EFAULT : 0; -+ break; -+ -+ case WDIOC_GETSTATUS: -+ case WDIOC_GETBOOTSTATUS: -+ ret = put_user(0, (int __user *)arg); -+ break; -+ -+ case WDIOC_KEEPALIVE: -+ ts72xx_wdt_ping(); -+ ret = 0; -+ break; -+ -+ case WDIOC_SETTIMEOUT: -+ if (get_user(new_margin, (int __user *)arg)) -+ return -EFAULT; -+ -+ ts72xx_parse_timeout(new_margin); -+ ts72xx_wdt_enable(); -+ /* Fall */ -+ -+ case WDIOC_GETTIMEOUT: -+ ret = put_user(timeout, (int __user *)arg); -+ break; -+ } -+ -+ return ret; -+} -+ -+static int ts72xx_wdt_open(struct inode *inode, struct file *file) -+{ -+ if (test_and_set_bit(WDT_IN_USE, &ts72xx_wdt_status)) -+ return -EBUSY; -+ -+ if (nowayout) { -+ __module_get(THIS_MODULE); -+ } -+ -+ ts72xx_wdt_enable(); -+ ts72xx_wdt_ping(); -+ -+ return nonseekable_open(inode, file); -+} -+ -+static int ts72xx_wdt_close(struct inode *inode, struct file *file) -+{ -+ if (test_bit(WDT_OK_TO_CLOSE, &ts72xx_wdt_status)) -+ ts72xx_wdt_disable(); -+ else -+ printk(KERN_CRIT PFX "Device file closed unexpectedly. " -+ "Will not stop the WDT!\n"); -+ -+ clear_bit(WDT_IN_USE, &ts72xx_wdt_status); -+ -+ return 0; -+} -+ -+/* -+ * Kernel Interfaces -+ */ -+ -+static struct file_operations ts72xx_wdt_fops = { -+ .owner = THIS_MODULE, -+ .llseek = no_llseek, -+ .write = ts72xx_wdt_write, -+ .ioctl = ts72xx_wdt_ioctl, -+ .open = ts72xx_wdt_open, -+ .release = ts72xx_wdt_close, -+}; -+ -+static struct miscdevice ts72xx_wdt_miscdev = { -+ .minor = WATCHDOG_MINOR, -+ .name = "watchdog", -+ .fops = &ts72xx_wdt_fops, -+}; -+ -+static void ts72xx_wdt_shutdown(struct platform_device *dev) -+{ -+ ts72xx_wdt_disable(); -+} -+ -+static int __devinit ts72xx_wdt_probe(struct platform_device *dev) -+{ -+ struct resource *r; -+ int ret; -+ -+ if (!machine_is_ts72xx()) -+ return -ENODEV; -+ -+ r = platform_get_resource(dev, IORESOURCE_MEM, 0); -+ -+ if (!r) { -+ ret = -ENODEV; -+ goto err_out; -+ } -+ -+ control_register = ioremap(r->start, r->end - r->start + 1); -+ -+ if (control_register == NULL) { -+ ret = -ENOMEM; -+ goto err_out; -+ } -+ -+ r = platform_get_resource(dev, IORESOURCE_MEM, 1); -+ -+ if (!r) { -+ ret = -ENODEV; -+ goto err_unmap1; -+ } -+ -+ feed_register = ioremap(r->start, r->end - r->start + 1); -+ -+ if (feed_register == NULL) { -+ ret = -ENOMEM; -+ goto err_unmap1; -+ } -+ -+ ret = misc_register(&ts72xx_wdt_miscdev); -+ if (ret) { -+ printk(KERN_ERR PFX "cannot register miscdev on minor=%d " -+ "(err=%d), ep93xx_watchdog already loaded?!\n", WATCHDOG_MINOR, ret); -+ goto err_unmap2; -+ } -+ -+ printk(KERN_INFO PFX "TS-72xx watchdog driver, v%s\n", WATCHDOG_VERSION); -+ ts72xx_parse_timeout(timeout); -+ -+ return 0; -+ -+err_unmap2: -+ iounmap(feed_register); -+err_unmap1: -+ iounmap(control_register); -+err_out: -+ return ret; -+} -+ -+static int __devexit ts72xx_wdt_remove(struct platform_device *dev) -+{ -+ misc_deregister(&ts72xx_wdt_miscdev); -+ iounmap(feed_register); -+ iounmap(control_register); -+ -+ return 0; -+} -+ -+static struct platform_driver ts72xx_wdt_driver = { -+ .probe = ts72xx_wdt_probe, -+ .remove = __devexit_p(ts72xx_wdt_remove), -+ .shutdown = ts72xx_wdt_shutdown, -+ .driver = { -+ .owner = THIS_MODULE, -+ .name = "ts72xx_wdt", -+ }, -+}; -+ -+static int __init ts72xx_wdt_init(void) -+{ -+ return platform_driver_register(&ts72xx_wdt_driver); -+} -+ -+static void __exit ts72xx_wdt_exit(void) -+{ -+ platform_driver_unregister(&ts72xx_wdt_driver); -+} -+ -+module_init(ts72xx_wdt_init); -+module_exit(ts72xx_wdt_exit); -+ -+#ifdef CONFIG_WATCHDOG_NOWAYOUT -+module_param(nowayout, int, 0); -+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=CONFIG_WATCHDOG_NOWAYOUT)"); -+#endif -+ -+module_param(timeout, int, 0); -+MODULE_PARM_DESC(timeout,"Watchdog timeout in milliseconds (250..8000, default=" __MODULE_STRING(WATCHDOG_TIMEOUT) ")"); -+ -+MODULE_AUTHOR("Matthieu Crapet <mcrapet@gmail.com>"); -+MODULE_DESCRIPTION("TS-72xx watchdog driver"); -+MODULE_LICENSE("GPL"); -+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); -Index: linux-2.6.22/include/asm-arm/arch-ep93xx/ts72xx.h -=================================================================== ---- linux-2.6.22.orig/include/asm-arm/arch-ep93xx/ts72xx.h 2007-08-30 01:33:25.000000000 +0200 -+++ linux-2.6.22/include/asm-arm/arch-ep93xx/ts72xx.h 2007-08-30 01:34:14.000000000 +0200 -@@ -68,6 +68,9 @@ - #define TS72XX_RTC_DATA_PHYS_BASE 0x11700000 - #define TS72XX_RTC_DATA_SIZE 0x00001000 - -+#define TS72XX_WATCHDOG_CONTROL_PHYS_BASE 0x23800000 -+#define TS72XX_WATCHDOG_FEED_PHYS_BASE 0x23c00000 -+ - #ifndef __ASSEMBLY__ - #include <asm/io.h> - diff --git a/packages/linux/linux-2.6.24/ts72xx/ts72xx-rs485.patch b/packages/linux/linux-2.6.24/ts72xx/ts72xx-rs485.patch new file mode 100644 index 0000000000..0883322c28 --- /dev/null +++ b/packages/linux/linux-2.6.24/ts72xx/ts72xx-rs485.patch @@ -0,0 +1,219 @@ +RS485 auto mode support ported from 2.4 (diff against 2.6.19-rc6-git10) + +Signed-off-by: Petr Stetiar <ynezz@true.cz> + +diff --git a/drivers/serial/amba-pl010.c b/drivers/serial/amba-pl010.c +index 4213fab..5b3c5ff 100644 +--- a/drivers/serial/amba-pl010.c ++++ b/drivers/serial/amba-pl010.c +@@ -50,6 +50,7 @@ + #include <linux/amba/serial.h> + + #include <asm/io.h> ++#include <asm/hardware.h> + + #define UART_NR 8 + +@@ -65,6 +66,11 @@ + #define UART_DUMMY_RSR_RX 256 + #define UART_PORT_SIZE 64 + ++#ifdef CONFIG_MACH_TS72XX ++static void __iomem *ts_rs485_data9_register; ++static void __iomem *ts_rs485_control_register; ++#endif ++ + /* + * We wrap our port structure around the generic uart_port. + */ +@@ -487,6 +493,107 @@ static int pl010_verify_port(struct uart + return ret; + } + ++#ifdef CONFIG_MACH_TS72XX ++static int ts72xx_rs485_init(void) ++{ ++ ts_rs485_data9_register = ioremap(TS72XX_RS485_DATA9_PHYS_BASE, 4096); ++ if (ts_rs485_data9_register == NULL) { ++ return -1; ++ } ++ ++ ts_rs485_control_register = ioremap(TS72XX_RS485_CONTROL_PHYS_BASE, 4096); ++ if (ts_rs485_control_register == NULL) { ++ iounmap(ts_rs485_data9_register); ++ return -1; ++ } ++ ++ return 0; ++} ++ ++static int ts72xx_auto485(struct uart_port *port, unsigned int cmd, unsigned long *arg) ++{ ++ int baud, cflag, mode; ++ int datalength; ++ ++ mode = (int)*arg; ++ if (!is_rs485_installed()) { ++ printk("amba-pl010.c: this board does not support RS485 auto mode\n"); ++ return -EINVAL; ++ } ++ ++ if (port->line != 1) { ++ printk("amba-pl010.c: auto RS485 mode is only supported on second port (/dev/ttyAM1)\n"); ++ return -EINVAL; ++ } ++ ++ datalength = 8; ++ cflag = port->info->tty->termios->c_cflag ; ++ if (cflag & PARENB) ++ datalength++; ++ ++ if (cflag & CSTOPB) ++ datalength++; ++ ++ baud = tty_get_baud_rate(port->info->tty); ++ ++ switch (cmd) { ++ case TIOC_SBCC485: ++ if ((mode & TS72XX_RS485_AUTO485FD) || (mode & TS72XX_RS485_AUTO485HD)) { ++ printk("amba-pl010.c: unsetting auto RS485 mode\n"); ++ __raw_writew(TS72XX_RS485_MODE_RS232, ts_rs485_control_register); ++ __raw_writew(TS72XX_RS485_MODE_RS232, ts_rs485_data9_register); ++ } ++ break; ++ case TIOC_SBCS485: ++ if (mode & TS72XX_RS485_AUTO485FD) { ++ printk ("amba-pl010.c: setting FULL duplex auto RS485 mode\n"); ++ __raw_writew(TS72XX_RS485_MODE_FD, ts_rs485_control_register); ++ if (datalength > 8) ++ __raw_writew(TS72XX_RS485_MODE_FD, ts_rs485_data9_register); ++ } else if (mode & TS72XX_RS485_AUTO485HD) { ++ printk("amba-pl010.c: setting HALF DUPLEX auto RS485 mode\n"); ++ switch (baud) { ++ case 9600: ++ __raw_writew(TS72XX_RS485_MODE_9600_HD, ts_rs485_control_register); ++ break; ++ case 19200: ++ __raw_writew(TS72XX_RS485_MODE_19200_HD, ts_rs485_control_register); ++ break; ++ case 57600: ++ __raw_writew(TS72XX_RS485_MODE_57600_HD, ts_rs485_control_register); ++ break; ++ case 115200: ++ __raw_writew(TS72XX_RS485_MODE_115200_HD, ts_rs485_control_register); ++ break; ++ default: ++ printk("amba-pl010.c: %d baud rate is not supported for auto RS485 mode\n", baud); ++ return -1; ++ } ++ if (datalength > 8) ++ __raw_writew(TS72XX_RS485_MODE_FD, ts_rs485_data9_register); ++ } ++ break; ++ } ++ ++ return 0; ++} ++#endif ++ ++int pl010_ioctl(struct uart_port *port, unsigned int cmd, unsigned long arg) ++{ ++#ifdef CONFIG_MACH_TS72XX ++ switch (cmd) { ++ case TIOC_SBCC485: ++ case TIOC_SBCS485: ++ return ts72xx_auto485(port, cmd, (unsigned long *)arg); ++ break; ++ default: ++ return -ENOIOCTLCMD; ++ } ++#endif ++ return -ENOIOCTLCMD; ++} ++ + static struct uart_ops amba_pl010_pops = { + .tx_empty = pl010_tx_empty, + .set_mctrl = pl010_set_mctrl, +@@ -504,6 +611,7 @@ static struct uart_ops amba_pl010_pops = + .request_port = pl010_request_port, + .config_port = pl010_config_port, + .verify_port = pl010_verify_port, ++ .ioctl = pl010_ioctl, + }; + + static struct uart_amba_port *amba_ports[UART_NR]; +@@ -746,6 +854,15 @@ static int __init pl010_init(void) + ret = uart_register_driver(&amba_reg); + if (ret == 0) { + ret = amba_driver_register(&pl010_driver); ++#ifdef CONFIG_MACH_TS72XX ++ if (!ret && is_rs485_installed()) { ++ ret = ts72xx_rs485_init(); ++ if (ret) ++ printk("amba-pl010.c: ts72xx_rs485_init() failed\n"); ++ else ++ printk("amba-pl010.c: auto RS485 mode initialized\n"); ++ } ++#endif + if (ret) + uart_unregister_driver(&amba_reg); + } +@@ -756,6 +873,10 @@ static void __exit pl010_exit(void) + { + amba_driver_unregister(&pl010_driver); + uart_unregister_driver(&amba_reg); ++#ifdef CONFIG_MACH_TS72XX ++ iounmap(ts_rs485_data9_register); ++ iounmap(ts_rs485_control_register); ++#endif + } + + module_init(pl010_init); +diff --git a/include/asm-arm/arch-ep93xx/ts72xx.h b/include/asm-arm/arch-ep93xx/ts72xx.h +index a94f63f..4c9396b 100644 +--- a/include/asm-arm/arch-ep93xx/ts72xx.h ++++ b/include/asm-arm/arch-ep93xx/ts72xx.h +@@ -68,6 +68,16 @@ + #define TS72XX_RTC_DATA_PHYS_BASE 0x11700000 + #define TS72XX_RTC_DATA_SIZE 0x00001000 + ++#define TS72XX_RS485_CONTROL_PHYS_BASE 0x22C00000 ++#define TS72XX_RS485_DATA9_PHYS_BASE 0x23000000 ++#define TS72XX_RS485_AUTO485FD 1 ++#define TS72XX_RS485_AUTO485HD 2 ++#define TS72XX_RS485_MODE_RS232 0x00 ++#define TS72XX_RS485_MODE_FD 0x01 ++#define TS72XX_RS485_MODE_9600_HD 0x04 ++#define TS72XX_RS485_MODE_19200_HD 0x05 ++#define TS72XX_RS485_MODE_57600_HD 0x06 ++#define TS72XX_RS485_MODE_115200_HD 0x07 + + #ifndef __ASSEMBLY__ + #include <asm/io.h> +@@ -87,6 +100,12 @@ static inline int board_is_ts7260(void) + return __raw_readb(TS72XX_MODEL_VIRT_BASE) == TS72XX_MODEL_TS7260; + } + ++static inline int is_rs485_installed(void) ++{ ++ return !!(__raw_readb(TS72XX_OPTIONS_VIRT_BASE) & ++ TS72XX_OPTIONS_COM2_RS485); ++} ++ + static inline int is_max197_installed(void) + { + return !!(__raw_readb(TS72XX_OPTIONS_VIRT_BASE) & +diff --git a/include/asm-arm/ioctls.h b/include/asm-arm/ioctls.h +index bb9a7aa..4d7dad1 100644 +--- a/include/asm-arm/ioctls.h ++++ b/include/asm-arm/ioctls.h +@@ -66,6 +66,9 @@ + #define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */ + #define FIOQSIZE 0x545E + ++#define TIOC_SBCC485 0x545F /* TS72xx RTS/485 mode clear */ ++#define TIOC_SBCS485 0x5460 /* TS72xx RTS/485 mode set */ ++ + /* Used for packet mode */ + #define TIOCPKT_DATA 0 + #define TIOCPKT_FLUSHREAD 1 diff --git a/packages/linux/linux-2.6.22+2.6.23-rc5/.mtn2git_empty b/packages/linux/linux-2.6.25/sequoia/.mtn2git_empty index e69de29bb2..e69de29bb2 100644 --- a/packages/linux/linux-2.6.22+2.6.23-rc5/.mtn2git_empty +++ b/packages/linux/linux-2.6.25/sequoia/.mtn2git_empty diff --git a/packages/linux/linux-2.6.25/sequoia/defconfig b/packages/linux/linux-2.6.25/sequoia/defconfig new file mode 100644 index 0000000000..830d6108f3 --- /dev/null +++ b/packages/linux/linux-2.6.25/sequoia/defconfig @@ -0,0 +1,2158 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.25 +# Mon May 5 11:59:35 2008 +# +# CONFIG_PPC64 is not set + +# +# Processor support +# +# CONFIG_6xx is not set +# CONFIG_PPC_85xx is not set +# CONFIG_PPC_8xx is not set +# CONFIG_40x is not set +CONFIG_44x=y +# CONFIG_E200 is not set +CONFIG_PPC_FPU=y +CONFIG_4xx=y +CONFIG_BOOKE=y +CONFIG_PTE_64BIT=y +CONFIG_PHYS_64BIT=y +# CONFIG_PPC_MM_SLICES is not set +CONFIG_NOT_COHERENT_CACHE=y +CONFIG_PPC32=y +CONFIG_WORD_SIZE=32 +CONFIG_PPC_MERGE=y +CONFIG_MMU=y +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_TIME_VSYSCALL=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +CONFIG_IRQ_PER_CPU=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_ARCH_HAS_ILOG2_U32=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +# CONFIG_ARCH_NO_VIRT_TO_BUS is not set +CONFIG_PPC=y +CONFIG_EARLY_PRINTK=y +CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_PPC_OF=y +CONFIG_OF=y +CONFIG_PPC_UDBG_16550=y +# CONFIG_GENERIC_TBSYNC is not set +CONFIG_AUDIT_ARCH=y +CONFIG_GENERIC_BUG=y +# CONFIG_DEFAULT_UIMAGE is not set +CONFIG_PPC_DCR_NATIVE=y +# CONFIG_PPC_DCR_MMIO is not set +CONFIG_PPC_DCR=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_HOTPLUG is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +CONFIG_CLASSIC_RCU=y +# CONFIG_PPC4xx_PCI_EXPRESS is not set + +# +# Platform support +# +# CONFIG_PPC_MPC512x is not set +# CONFIG_PPC_MPC5121 is not set +# CONFIG_PPC_CELL is not set +# CONFIG_PPC_CELL_NATIVE is not set +# CONFIG_PQ2ADS is not set +# CONFIG_BAMBOO is not set +# CONFIG_EBONY is not set +CONFIG_SEQUOIA=y +# CONFIG_TAISHAN is not set +# CONFIG_KATMAI is not set +# CONFIG_RAINIER is not set +# CONFIG_WARP is not set +CONFIG_440EPX=y +# CONFIG_IPIC is not set +# CONFIG_MPIC is not set +# CONFIG_MPIC_WEIRD is not set +# CONFIG_PPC_I8259 is not set +# CONFIG_PPC_RTAS is not set +# CONFIG_MMIO_NVRAM is not set +# CONFIG_PPC_MPC106 is not set +# CONFIG_PPC_970_NAP is not set +# CONFIG_PPC_INDIRECT_IO is not set +# CONFIG_GENERIC_IOMAP is not set +# CONFIG_CPU_FREQ is not set +# CONFIG_FSL_ULI1575 is not set + +# +# Kernel options +# +# CONFIG_HIGHMEM is not set +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +# CONFIG_MATH_EMULATION is not set +# CONFIG_IOMMU_HELPER is not set +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_HAS_WALK_MEMORY=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_RESOURCES_64BIT=y +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +# CONFIG_PROC_DEVICETREE is not set +CONFIG_CMDLINE_BOOL=y +CONFIG_CMDLINE=" debug " +CONFIG_SECCOMP=y +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +CONFIG_ZONE_DMA=y +CONFIG_PPC_INDIRECT_PCI=y +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +CONFIG_PCI_SYSCALL=y +CONFIG_PCIEPORTBUS=y +CONFIG_PCIEAER=y +CONFIG_ARCH_SUPPORTS_MSI=y +# CONFIG_PCI_MSI is not set +CONFIG_PCI_LEGACY=y +# CONFIG_PCI_DEBUG is not set + +# +# Advanced setup +# +CONFIG_ADVANCED_OPTIONS=y +CONFIG_HIGHMEM_START=0xfe000000 +# CONFIG_LOWMEM_SIZE_BOOL is not set +CONFIG_LOWMEM_SIZE=0x30000000 +# CONFIG_KERNEL_START_BOOL is not set +CONFIG_KERNEL_START=0xc0000000 +# CONFIG_TASK_SIZE_BOOL is not set +CONFIG_TASK_SIZE=0xc0000000 +# CONFIG_CONSISTENT_START_BOOL is not set +CONFIG_CONSISTENT_START=0xff100000 +# CONFIG_CONSISTENT_SIZE_BOOL is not set +CONFIG_CONSISTENT_SIZE=0x00200000 +# CONFIG_BOOT_LOAD_BOOL is not set +CONFIG_BOOT_LOAD=0x01000000 + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_ASK_IP_FIB_HASH=y +# CONFIG_IP_FIB_TRIE is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_MULTIPLE_TABLES=y +CONFIG_IP_ROUTE_MULTIPATH=y +# CONFIG_IP_ROUTE_VERBOSE is not set +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +CONFIG_NET_IPIP=m +CONFIG_NET_IPGRE=m +# CONFIG_NET_IPGRE_BROADCAST is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +CONFIG_INET_AH=m +CONFIG_INET_ESP=m +CONFIG_INET_IPCOMP=m +CONFIG_INET_XFRM_TUNNEL=m +CONFIG_INET_TUNNEL=m +CONFIG_INET_XFRM_MODE_TRANSPORT=m +CONFIG_INET_XFRM_MODE_TUNNEL=m +CONFIG_INET_XFRM_MODE_BEET=m +CONFIG_INET_LRO=m +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +CONFIG_TCP_CONG_ADVANCED=y +CONFIG_TCP_CONG_BIC=m +CONFIG_TCP_CONG_CUBIC=y +CONFIG_TCP_CONG_WESTWOOD=m +CONFIG_TCP_CONG_HTCP=m +CONFIG_TCP_CONG_HSTCP=m +CONFIG_TCP_CONG_HYBLA=m +CONFIG_TCP_CONG_VEGAS=m +CONFIG_TCP_CONG_SCALABLE=m +CONFIG_TCP_CONG_LP=m +CONFIG_TCP_CONG_VENO=m +CONFIG_TCP_CONG_YEAH=m +CONFIG_TCP_CONG_ILLINOIS=m +# CONFIG_DEFAULT_BIC is not set +CONFIG_DEFAULT_CUBIC=y +# CONFIG_DEFAULT_HTCP is not set +# CONFIG_DEFAULT_VEGAS is not set +# CONFIG_DEFAULT_WESTWOOD is not set +# CONFIG_DEFAULT_RENO is not set +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +CONFIG_IP_VS=m +# CONFIG_IP_VS_DEBUG is not set +CONFIG_IP_VS_TAB_BITS=12 + +# +# IPVS transport protocol load balancing support +# +# CONFIG_IP_VS_PROTO_TCP is not set +# CONFIG_IP_VS_PROTO_UDP is not set +# CONFIG_IP_VS_PROTO_ESP is not set +# CONFIG_IP_VS_PROTO_AH is not set + +# +# IPVS scheduler +# +CONFIG_IP_VS_RR=m +CONFIG_IP_VS_WRR=m +CONFIG_IP_VS_LC=m +CONFIG_IP_VS_WLC=m +CONFIG_IP_VS_LBLC=m +CONFIG_IP_VS_LBLCR=m +CONFIG_IP_VS_DH=m +CONFIG_IP_VS_SH=m +CONFIG_IP_VS_SED=m +CONFIG_IP_VS_NQ=m + +# +# IPVS application helper +# +CONFIG_IPV6=m +# CONFIG_IPV6_PRIVACY is not set +# CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_IPV6_OPTIMISTIC_DAD is not set +CONFIG_INET6_AH=m +CONFIG_INET6_ESP=m +CONFIG_INET6_IPCOMP=m +CONFIG_IPV6_MIP6=m +CONFIG_INET6_XFRM_TUNNEL=m +CONFIG_INET6_TUNNEL=m +CONFIG_INET6_XFRM_MODE_TRANSPORT=m +CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m +CONFIG_IPV6_SIT=m +# CONFIG_IPV6_TUNNEL is not set +# CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_NETWORK_SECMARK is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +CONFIG_NETFILTER_ADVANCED=y +CONFIG_BRIDGE_NETFILTER=y + +# +# Core Netfilter Configuration +# +# CONFIG_NETFILTER_NETLINK_QUEUE is not set +# CONFIG_NETFILTER_NETLINK_LOG is not set +# CONFIG_NF_CONNTRACK is not set +# CONFIG_NETFILTER_XTABLES is not set + +# +# IP: Netfilter Configuration +# +# CONFIG_IP_NF_QUEUE is not set +# CONFIG_IP_NF_IPTABLES is not set +# CONFIG_IP_NF_ARPTABLES is not set + +# +# IPv6: Netfilter Configuration +# +# CONFIG_IP6_NF_QUEUE is not set +# CONFIG_IP6_NF_IPTABLES is not set + +# +# DECnet: Netfilter Configuration +# +# CONFIG_DECNET_NF_GRABULATOR is not set + +# +# Bridge: Netfilter Configuration +# +# CONFIG_BRIDGE_NF_EBTABLES is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +CONFIG_ATM=m +CONFIG_ATM_CLIP=m +# CONFIG_ATM_CLIP_NO_ICMP is not set +CONFIG_ATM_LANE=m +CONFIG_ATM_MPOA=m +CONFIG_ATM_BR2684=m +# CONFIG_ATM_BR2684_IPFILTER is not set +CONFIG_BRIDGE=m +CONFIG_VLAN_8021Q=m +CONFIG_DECNET=m +# CONFIG_DECNET_ROUTER is not set +CONFIG_LLC=m +CONFIG_LLC2=m +CONFIG_IPX=m +# CONFIG_IPX_INTERN is not set +CONFIG_ATALK=m +CONFIG_DEV_APPLETALK=m +# CONFIG_IPDDP is not set +CONFIG_X25=m +CONFIG_LAPB=m +CONFIG_ECONET=m +# CONFIG_ECONET_AUNUDP is not set +# CONFIG_ECONET_NATIVE is not set +CONFIG_WAN_ROUTER=m +CONFIG_NET_SCHED=y + +# +# Queueing/Scheduling +# +CONFIG_NET_SCH_CBQ=m +CONFIG_NET_SCH_HTB=m +CONFIG_NET_SCH_HFSC=m +CONFIG_NET_SCH_ATM=m +CONFIG_NET_SCH_PRIO=m +CONFIG_NET_SCH_RR=m +CONFIG_NET_SCH_RED=m +CONFIG_NET_SCH_SFQ=m +CONFIG_NET_SCH_TEQL=m +CONFIG_NET_SCH_TBF=m +CONFIG_NET_SCH_GRED=m +CONFIG_NET_SCH_DSMARK=m +CONFIG_NET_SCH_NETEM=m +CONFIG_NET_SCH_INGRESS=m + +# +# Classification +# +CONFIG_NET_CLS=y +CONFIG_NET_CLS_BASIC=m +CONFIG_NET_CLS_TCINDEX=m +CONFIG_NET_CLS_ROUTE4=m +CONFIG_NET_CLS_ROUTE=y +CONFIG_NET_CLS_FW=m +CONFIG_NET_CLS_U32=m +# CONFIG_CLS_U32_PERF is not set +# CONFIG_CLS_U32_MARK is not set +CONFIG_NET_CLS_RSVP=m +CONFIG_NET_CLS_RSVP6=m +CONFIG_NET_CLS_FLOW=m +CONFIG_NET_EMATCH=y +CONFIG_NET_EMATCH_STACK=32 +CONFIG_NET_EMATCH_CMP=m +CONFIG_NET_EMATCH_NBYTE=m +CONFIG_NET_EMATCH_U32=m +CONFIG_NET_EMATCH_META=m +CONFIG_NET_EMATCH_TEXT=m +CONFIG_NET_CLS_ACT=y +CONFIG_NET_ACT_POLICE=m +CONFIG_NET_ACT_GACT=m +# CONFIG_GACT_PROB is not set +CONFIG_NET_ACT_MIRRED=m +CONFIG_NET_ACT_NAT=m +CONFIG_NET_ACT_PEDIT=m +CONFIG_NET_ACT_SIMP=m +CONFIG_NET_CLS_IND=y +CONFIG_NET_SCH_FIFO=y + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +CONFIG_CAN=m +CONFIG_CAN_RAW=m +CONFIG_CAN_BCM=m + +# +# CAN Device Drivers +# +CONFIG_CAN_VCAN=m +# CONFIG_CAN_DEBUG_DEVICES is not set +# CONFIG_IRDA is not set +CONFIG_BT=m +CONFIG_BT_L2CAP=m +CONFIG_BT_SCO=m +CONFIG_BT_RFCOMM=m +CONFIG_BT_RFCOMM_TTY=y +CONFIG_BT_BNEP=m +# CONFIG_BT_BNEP_MC_FILTER is not set +# CONFIG_BT_BNEP_PROTO_FILTER is not set +# CONFIG_BT_CMTP is not set +CONFIG_BT_HIDP=m + +# +# Bluetooth device drivers +# +CONFIG_BT_HCIUSB=m +CONFIG_BT_HCIUSB_SCO=y +# CONFIG_BT_HCIBTSDIO is not set +CONFIG_BT_HCIUART=m +CONFIG_BT_HCIUART_H4=y +CONFIG_BT_HCIUART_BCSP=y +CONFIG_BT_HCIUART_LL=y +CONFIG_BT_HCIBCM203X=m +CONFIG_BT_HCIBPA10X=m +CONFIG_BT_HCIBFUSB=m +CONFIG_BT_HCIVHCI=m +# CONFIG_AF_RXRPC is not set +CONFIG_FIB_RULES=y + +# +# Wireless +# +CONFIG_CFG80211=m +CONFIG_NL80211=y +CONFIG_WIRELESS_EXT=y +CONFIG_MAC80211=m + +# +# Rate control algorithm selection +# +CONFIG_MAC80211_RC_DEFAULT_PID=y +# CONFIG_MAC80211_RC_DEFAULT_SIMPLE is not set +# CONFIG_MAC80211_RC_DEFAULT_NONE is not set + +# +# Selecting 'y' for an algorithm will +# + +# +# build the algorithm into mac80211. +# +CONFIG_MAC80211_RC_DEFAULT="pid" +CONFIG_MAC80211_RC_PID=y +# CONFIG_MAC80211_RC_SIMPLE is not set +# CONFIG_MAC80211_DEBUGFS is not set +# CONFIG_MAC80211_DEBUG_PACKET_ALIGNMENT is not set +# CONFIG_MAC80211_DEBUG is not set +CONFIG_IEEE80211=m +# CONFIG_IEEE80211_DEBUG is not set +CONFIG_IEEE80211_CRYPT_WEP=m +CONFIG_IEEE80211_CRYPT_CCMP=m +CONFIG_IEEE80211_CRYPT_TKIP=m +CONFIG_IEEE80211_SOFTMAC=m +# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set +CONFIG_RFKILL=m +# CONFIG_RFKILL_INPUT is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +# CONFIG_STANDALONE is not set +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=m +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_OF_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_START=0x8000000 +CONFIG_MTD_PHYSMAP_LEN=0x0 +CONFIG_MTD_PHYSMAP_BANKWIDTH=2 +# CONFIG_MTD_PHYSMAP_OF is not set +# CONFIG_MTD_INTEL_VR_NOR is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_VERIFY_WRITE=y +CONFIG_MTD_NAND_ECC_SMC=y +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_CAFE is not set +# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ALAUDA is not set +# CONFIG_MTD_NAND_FSL_ELBC is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +CONFIG_OF_DEVICE=y +CONFIG_PARPORT=m +# CONFIG_PARPORT_PC is not set +# CONFIG_PARPORT_GSC is not set +# CONFIG_PARPORT_AX88796 is not set +# CONFIG_PARPORT_1284 is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_CRYPTOLOOP=m +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +CONFIG_ATA_OVER_ETH=m +# CONFIG_XILINX_SYSACE is not set +CONFIG_MISC_DEVICES=y +# CONFIG_PHANTOM is not set +CONFIG_EEPROM_93CX6=m +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y +CONFIG_IDE=y +CONFIG_IDE_MAX_HWIFS=4 +CONFIG_BLK_DEV_IDE=y + +# +# Please see Documentation/ide/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_BLK_DEV_IDEDISK=y +# CONFIG_IDEDISK_MULTI_MODE is not set +# CONFIG_BLK_DEV_IDECD is not set +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +# CONFIG_BLK_DEV_IDESCSI is not set +# CONFIG_IDE_TASK_IOCTL is not set +CONFIG_IDE_PROC_FS=y + +# +# IDE chipset support/bugfixes +# +CONFIG_IDE_GENERIC=y +# CONFIG_BLK_DEV_PLATFORM is not set +CONFIG_BLK_DEV_IDEDMA_SFF=y + +# +# PCI IDE chipsets support +# +CONFIG_BLK_DEV_IDEPCI=y +CONFIG_IDEPCI_PCIBUS_ORDER=y +# CONFIG_BLK_DEV_GENERIC is not set +# CONFIG_BLK_DEV_OPTI621 is not set +CONFIG_BLK_DEV_IDEDMA_PCI=y +# CONFIG_BLK_DEV_AEC62XX is not set +# CONFIG_BLK_DEV_ALI15X3 is not set +# CONFIG_BLK_DEV_AMD74XX is not set +CONFIG_BLK_DEV_CMD64X=y +# CONFIG_BLK_DEV_TRIFLEX is not set +# CONFIG_BLK_DEV_CY82C693 is not set +# CONFIG_BLK_DEV_CS5520 is not set +# CONFIG_BLK_DEV_CS5530 is not set +# CONFIG_BLK_DEV_HPT34X is not set +# CONFIG_BLK_DEV_HPT366 is not set +# CONFIG_BLK_DEV_JMICRON is not set +# CONFIG_BLK_DEV_SC1200 is not set +# CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT8213 is not set +# CONFIG_BLK_DEV_IT821X is not set +# CONFIG_BLK_DEV_NS87415 is not set +# CONFIG_BLK_DEV_PDC202XX_OLD is not set +# CONFIG_BLK_DEV_PDC202XX_NEW is not set +# CONFIG_BLK_DEV_SVWKS is not set +# CONFIG_BLK_DEV_SIIMAGE is not set +# CONFIG_BLK_DEV_SL82C105 is not set +# CONFIG_BLK_DEV_SLC90E66 is not set +# CONFIG_BLK_DEV_TRM290 is not set +# CONFIG_BLK_DEV_VIA82CXXX is not set +# CONFIG_BLK_DEV_TC86C001 is not set +CONFIG_BLK_DEV_IDEDMA=y +CONFIG_IDE_ARCH_OBSOLETE_INIT=y +# CONFIG_BLK_DEV_HD is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_DPT_I2O is not set +# CONFIG_SCSI_ADVANSYS is not set +# CONFIG_SCSI_ARCMSR is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_HPTIOP is not set +# CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_EATA is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_GDTH is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_MVSAS is not set +# CONFIG_SCSI_STEX is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set +# CONFIG_SCSI_IPR is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +# CONFIG_SCSI_QLA_FC is not set +# CONFIG_SCSI_QLA_ISCSI is not set +# CONFIG_SCSI_LPFC is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_NSP32 is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_SRP is not set +CONFIG_ATA=y +# CONFIG_ATA_NONSTANDARD is not set +# CONFIG_SATA_AHCI is not set +# CONFIG_SATA_SVW is not set +# CONFIG_ATA_PIIX is not set +# CONFIG_SATA_MV is not set +# CONFIG_SATA_NV is not set +# CONFIG_PDC_ADMA is not set +# CONFIG_SATA_QSTOR is not set +# CONFIG_SATA_PROMISE is not set +# CONFIG_SATA_SX4 is not set +# CONFIG_SATA_SIL is not set +# CONFIG_SATA_SIL24 is not set +# CONFIG_SATA_SIS is not set +# CONFIG_SATA_ULI is not set +# CONFIG_SATA_VIA is not set +# CONFIG_SATA_VITESSE is not set +# CONFIG_SATA_INIC162X is not set +# CONFIG_PATA_ALI is not set +# CONFIG_PATA_AMD is not set +# CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATIIXP is not set +# CONFIG_PATA_CMD640_PCI is not set +# CONFIG_PATA_CMD64X is not set +# CONFIG_PATA_CS5520 is not set +# CONFIG_PATA_CS5530 is not set +# CONFIG_PATA_CYPRESS is not set +# CONFIG_PATA_EFAR is not set +# CONFIG_ATA_GENERIC is not set +# CONFIG_PATA_HPT366 is not set +# CONFIG_PATA_HPT37X is not set +# CONFIG_PATA_HPT3X2N is not set +# CONFIG_PATA_HPT3X3 is not set +# CONFIG_PATA_IT821X is not set +# CONFIG_PATA_IT8213 is not set +# CONFIG_PATA_JMICRON is not set +# CONFIG_PATA_TRIFLEX is not set +# CONFIG_PATA_MARVELL is not set +# CONFIG_PATA_MPIIX is not set +# CONFIG_PATA_OLDPIIX is not set +# CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NINJA32 is not set +# CONFIG_PATA_NS87410 is not set +# CONFIG_PATA_NS87415 is not set +# CONFIG_PATA_OPTI is not set +# CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PDC_OLD is not set +# CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RZ1000 is not set +# CONFIG_PATA_SC1200 is not set +# CONFIG_PATA_SERVERWORKS is not set +# CONFIG_PATA_PDC2027X is not set +# CONFIG_PATA_SIL680 is not set +# CONFIG_PATA_SIS is not set +# CONFIG_PATA_VIA is not set +# CONFIG_PATA_WINBOND is not set +# CONFIG_PATA_PLATFORM is not set +# CONFIG_MD is not set +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_FIREWIRE is not set +# CONFIG_IEEE1394 is not set +# CONFIG_I2O is not set +# CONFIG_MACINTOSH_DRIVERS is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_IFB is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +CONFIG_TUN=m +# CONFIG_VETH is not set +# CONFIG_ARCNET is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +CONFIG_MARVELL_PHY=m +CONFIG_DAVICOM_PHY=m +CONFIG_QSEMI_PHY=m +CONFIG_LXT_PHY=m +CONFIG_CICADA_PHY=m +CONFIG_VITESSE_PHY=m +CONFIG_SMSC_PHY=m +CONFIG_BROADCOM_PHY=m +CONFIG_ICPLUS_PHY=m +CONFIG_REALTEK_PHY=m +CONFIG_FIXED_PHY=y +CONFIG_MDIO_BITBANG=m +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ENC28J60 is not set +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +# CONFIG_IBM_NEW_EMAC is not set +CONFIG_IBM_NEW_EMAC_ZMII=y +CONFIG_IBM_NEW_EMAC_RGMII=y +# CONFIG_IBM_NEW_EMAC_TAH is not set +CONFIG_IBM_NEW_EMAC_EMAC4=y +CONFIG_NET_PCI=y +# CONFIG_PCNET32 is not set +# CONFIG_AMD8111_ETH is not set +# CONFIG_ADAPTEC_STARFIRE is not set +CONFIG_B44=m +CONFIG_B44_PCI_AUTOSELECT=y +CONFIG_B44_PCICORE_AUTOSELECT=y +CONFIG_B44_PCI=y +CONFIG_FORCEDETH=m +# CONFIG_FORCEDETH_NAPI is not set +CONFIG_EEPRO100=m +CONFIG_E100=m +CONFIG_FEALNX=m +CONFIG_NATSEMI=m +CONFIG_NE2K_PCI=m +CONFIG_8139CP=m +CONFIG_8139TOO=m +CONFIG_8139TOO_PIO=y +# CONFIG_8139TOO_TUNE_TWISTER is not set +# CONFIG_8139TOO_8129 is not set +# CONFIG_8139_OLD_RX_RESET is not set +CONFIG_R6040=m +CONFIG_SIS900=m +CONFIG_EPIC100=m +CONFIG_SUNDANCE=m +# CONFIG_SUNDANCE_MMIO is not set +CONFIG_TLAN=m +CONFIG_VIA_RHINE=m +# CONFIG_VIA_RHINE_MMIO is not set +# CONFIG_VIA_RHINE_NAPI is not set +CONFIG_SC92031=m +# CONFIG_NET_POCKET is not set +CONFIG_NETDEV_1000=y +CONFIG_ACENIC=m +# CONFIG_ACENIC_OMIT_TIGON_I is not set +CONFIG_DL2K=m +CONFIG_E1000=m +# CONFIG_E1000_NAPI is not set +# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set +CONFIG_E1000E=m +CONFIG_E1000E_ENABLED=y +CONFIG_IP1000=m +CONFIG_IGB=m +CONFIG_NS83820=m +CONFIG_HAMACHI=m +CONFIG_YELLOWFIN=m +CONFIG_R8169=m +# CONFIG_R8169_NAPI is not set +# CONFIG_R8169_VLAN is not set +CONFIG_SIS190=m +CONFIG_SKGE=m +# CONFIG_SKGE_DEBUG is not set +CONFIG_SKY2=m +# CONFIG_SKY2_DEBUG is not set +CONFIG_SK98LIN=m +CONFIG_VIA_VELOCITY=m +CONFIG_TIGON3=m +CONFIG_BNX2=m +CONFIG_QLA3XXX=m +CONFIG_ATL1=m +CONFIG_NETDEV_10000=y +CONFIG_CHELSIO_T1=m +# CONFIG_CHELSIO_T1_1G is not set +CONFIG_CHELSIO_T1_NAPI=y +CONFIG_CHELSIO_T3=m +CONFIG_IXGBE=m +CONFIG_IXGB=m +# CONFIG_IXGB_NAPI is not set +CONFIG_S2IO=m +# CONFIG_S2IO_NAPI is not set +CONFIG_MYRI10GE=m +CONFIG_NETXEN_NIC=m +CONFIG_NIU=m +# CONFIG_MLX4_CORE is not set +CONFIG_TEHUTI=m +CONFIG_BNX2X=m +# CONFIG_TR is not set + +# +# Wireless LAN +# +CONFIG_WLAN_PRE80211=y +# CONFIG_STRIP is not set +CONFIG_WLAN_80211=y +CONFIG_IPW2100=m +# CONFIG_IPW2100_MONITOR is not set +# CONFIG_IPW2100_DEBUG is not set +CONFIG_IPW2200=m +# CONFIG_IPW2200_MONITOR is not set +# CONFIG_IPW2200_QOS is not set +# CONFIG_IPW2200_DEBUG is not set +CONFIG_LIBERTAS=m +# CONFIG_LIBERTAS_USB is not set +# CONFIG_LIBERTAS_SDIO is not set +# CONFIG_LIBERTAS_DEBUG is not set +CONFIG_AIRO=m +CONFIG_HERMES=m +CONFIG_PLX_HERMES=m +CONFIG_TMD_HERMES=m +CONFIG_NORTEL_HERMES=m +CONFIG_PCI_HERMES=m +CONFIG_ATMEL=m +CONFIG_PCI_ATMEL=m +CONFIG_PRISM54=m +CONFIG_USB_ZD1201=m +CONFIG_USB_NET_RNDIS_WLAN=m +CONFIG_RTL8180=m +CONFIG_RTL8187=m +CONFIG_ADM8211=m +CONFIG_P54_COMMON=m +CONFIG_P54_USB=m +CONFIG_P54_PCI=m +CONFIG_ATH5K=m +CONFIG_IWL4965=m +CONFIG_IWL4965_QOS=y +CONFIG_IWL4965_HT=y +CONFIG_IWL4965_SPECTRUM_MEASUREMENT=y +CONFIG_IWL4965_SENSITIVITY=y +# CONFIG_IWL4965_DEBUG is not set +CONFIG_IWL3945=m +CONFIG_IWL3945_QOS=y +CONFIG_IWL3945_SPECTRUM_MEASUREMENT=y +# CONFIG_IWL3945_DEBUG is not set +CONFIG_HOSTAP=m +CONFIG_HOSTAP_FIRMWARE=y +# CONFIG_HOSTAP_FIRMWARE_NVRAM is not set +CONFIG_HOSTAP_PLX=m +CONFIG_HOSTAP_PCI=m +CONFIG_BCM43XX=m +CONFIG_BCM43XX_DEBUG=y +CONFIG_BCM43XX_DMA=y +CONFIG_BCM43XX_PIO=y +CONFIG_BCM43XX_DMA_AND_PIO_MODE=y +# CONFIG_BCM43XX_DMA_MODE is not set +# CONFIG_BCM43XX_PIO_MODE is not set +CONFIG_B43=m +CONFIG_B43_PCI_AUTOSELECT=y +CONFIG_B43_PCICORE_AUTOSELECT=y +# CONFIG_B43_DEBUG is not set +CONFIG_B43LEGACY=m +CONFIG_B43LEGACY_PCI_AUTOSELECT=y +CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y +CONFIG_B43LEGACY_DEBUG=y +CONFIG_B43LEGACY_DMA=y +CONFIG_B43LEGACY_PIO=y +CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y +# CONFIG_B43LEGACY_DMA_MODE is not set +# CONFIG_B43LEGACY_PIO_MODE is not set +CONFIG_ZD1211RW=m +# CONFIG_ZD1211RW_DEBUG is not set +CONFIG_RT2X00=m +CONFIG_RT2X00_LIB=m +CONFIG_RT2X00_LIB_PCI=m +CONFIG_RT2X00_LIB_USB=m +CONFIG_RT2X00_LIB_FIRMWARE=y +CONFIG_RT2X00_LIB_RFKILL=y +CONFIG_RT2400PCI=m +# CONFIG_RT2400PCI_RFKILL is not set +CONFIG_RT2500PCI=m +CONFIG_RT2500PCI_RFKILL=y +CONFIG_RT61PCI=m +CONFIG_RT61PCI_RFKILL=y +CONFIG_RT2500USB=m +CONFIG_RT73USB=m +# CONFIG_RT2X00_DEBUG is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +CONFIG_USB_USBNET=m +CONFIG_USB_NET_AX8817X=m +CONFIG_USB_NET_CDCETHER=m +# CONFIG_USB_NET_DM9601 is not set +# CONFIG_USB_NET_GL620A is not set +CONFIG_USB_NET_NET1080=m +# CONFIG_USB_NET_PLUSB is not set +# CONFIG_USB_NET_MCS7830 is not set +CONFIG_USB_NET_RNDIS_HOST=m +CONFIG_USB_NET_CDC_SUBSET=m +# CONFIG_USB_ALI_M5632 is not set +# CONFIG_USB_AN2720 is not set +CONFIG_USB_BELKIN=y +CONFIG_USB_ARMLINUX=y +# CONFIG_USB_EPSON2888 is not set +# CONFIG_USB_KC2190 is not set +CONFIG_USB_NET_ZAURUS=m +CONFIG_WAN=y +CONFIG_LANMEDIA=m +CONFIG_HDLC=m +CONFIG_HDLC_RAW=m +CONFIG_HDLC_RAW_ETH=m +CONFIG_HDLC_CISCO=m +CONFIG_HDLC_FR=m +CONFIG_HDLC_X25=m +CONFIG_PCI200SYN=m +CONFIG_WANXL=m +CONFIG_PC300=m + +# +# Cyclades-PC300 MLPPP support is disabled. +# + +# +# Refer to the file README.mlppp, provided by PC300 package. +# +CONFIG_PC300TOO=m +CONFIG_FARSYNC=m +CONFIG_DSCC4=m +# CONFIG_DSCC4_PCISYNC is not set +# CONFIG_DSCC4_PCI_RST is not set +CONFIG_DLCI=m +CONFIG_DLCI_MAX=8 +CONFIG_WAN_ROUTER_DRIVERS=m +CONFIG_CYCLADES_SYNC=m +# CONFIG_CYCLOMX_X25 is not set +CONFIG_LAPBETHER=m +CONFIG_X25_ASY=m +CONFIG_ATM_DRIVERS=y +# CONFIG_ATM_DUMMY is not set +# CONFIG_ATM_TCP is not set +# CONFIG_ATM_LANAI is not set +# CONFIG_ATM_ENI is not set +# CONFIG_ATM_FIRESTREAM is not set +# CONFIG_ATM_ZATM is not set +# CONFIG_ATM_NICSTAR is not set +# CONFIG_ATM_IDT77252 is not set +# CONFIG_ATM_AMBASSADOR is not set +# CONFIG_ATM_HORIZON is not set +# CONFIG_ATM_IA is not set +# CONFIG_ATM_FORE200E_MAYBE is not set +# CONFIG_ATM_HE is not set +CONFIG_FDDI=y +CONFIG_DEFXX=m +# CONFIG_DEFXX_MMIO is not set +CONFIG_SKFP=m +# CONFIG_HIPPI is not set +CONFIG_PLIP=m +CONFIG_PPP=m +CONFIG_PPP_MULTILINK=y +CONFIG_PPP_FILTER=y +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_MPPE=m +CONFIG_PPPOE=m +CONFIG_PPPOATM=m +CONFIG_PPPOL2TP=m +# CONFIG_SLIP is not set +CONFIG_SLHC=m +# CONFIG_NET_FC is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +CONFIG_ISDN=m +# CONFIG_ISDN_I4L is not set +CONFIG_ISDN_CAPI=m +CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y +CONFIG_CAPI_TRACE=y +# CONFIG_ISDN_CAPI_MIDDLEWARE is not set +CONFIG_ISDN_CAPI_CAPI20=m + +# +# CAPI hardware drivers +# +CONFIG_CAPI_AVM=y +CONFIG_ISDN_DRV_AVMB1_B1PCI=m +# CONFIG_ISDN_DRV_AVMB1_B1PCIV4 is not set +CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m +CONFIG_ISDN_DRV_AVMB1_T1PCI=m +CONFIG_ISDN_DRV_AVMB1_C4=m +CONFIG_CAPI_EICON=y +CONFIG_ISDN_DIVAS=m +# CONFIG_ISDN_DIVAS_BRIPCI is not set +# CONFIG_ISDN_DIVAS_PRIPCI is not set +CONFIG_ISDN_DIVAS_DIVACAPI=m +CONFIG_ISDN_DIVAS_USERIDI=m +CONFIG_ISDN_DIVAS_MAINT=m +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +CONFIG_INPUT_POLLDEV=m + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_ADS7846 is not set +CONFIG_TOUCHSCREEN_FUJITSU=m +CONFIG_TOUCHSCREEN_GUNZE=m +CONFIG_TOUCHSCREEN_ELO=m +CONFIG_TOUCHSCREEN_MTOUCH=m +CONFIG_TOUCHSCREEN_MK712=m +CONFIG_TOUCHSCREEN_PENMOUNT=m +CONFIG_TOUCHSCREEN_TOUCHRIGHT=m +CONFIG_TOUCHSCREEN_TOUCHWIN=m +CONFIG_TOUCHSCREEN_UCB1400=m +CONFIG_TOUCHSCREEN_USB_COMPOSITE=m +CONFIG_TOUCHSCREEN_USB_EGALAX=y +CONFIG_TOUCHSCREEN_USB_PANJIT=y +CONFIG_TOUCHSCREEN_USB_3M=y +CONFIG_TOUCHSCREEN_USB_ITM=y +CONFIG_TOUCHSCREEN_USB_ETURBO=y +CONFIG_TOUCHSCREEN_USB_GUNZE=y +CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y +CONFIG_TOUCHSCREEN_USB_IRTOUCH=y +CONFIG_TOUCHSCREEN_USB_IDEALTEK=y +CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y +CONFIG_TOUCHSCREEN_USB_GOTOP=y +CONFIG_INPUT_MISC=y +CONFIG_INPUT_ATI_REMOTE=m +CONFIG_INPUT_ATI_REMOTE2=m +CONFIG_INPUT_KEYSPAN_REMOTE=m +CONFIG_INPUT_POWERMATE=m +CONFIG_INPUT_YEALINK=m +CONFIG_INPUT_UINPUT=m + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +# CONFIG_SERIO_I8042 is not set +# CONFIG_SERIO_SERPORT is not set +# CONFIG_SERIO_PARKBD is not set +# CONFIG_SERIO_PCIPS2 is not set +# CONFIG_SERIO_LIBPS2 is not set +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set +CONFIG_NOZOMI=m + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_PCI=y +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_MANY_PORTS=y +CONFIG_SERIAL_8250_SHARE_IRQ=y +# CONFIG_SERIAL_8250_DETECT_IRQ is not set +# CONFIG_SERIAL_8250_RSA is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_UARTLITE is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_SERIAL_OF_PLATFORM=m +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_PRINTER is not set +# CONFIG_PPDEV is not set +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_NVRAM is not set +CONFIG_GEN_RTC=m +CONFIG_GEN_RTC_X=y +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_DEVPORT=y +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +CONFIG_I2C_ALGOBIT=y +CONFIG_I2C_ALGOPCF=y +CONFIG_I2C_ALGOPCA=y + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set +# CONFIG_I2C_MPC is not set +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PROSAVAGE is not set +# CONFIG_I2C_SAVAGE4 is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_TINY_USB is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set +# CONFIG_I2C_VOODOO3 is not set + +# +# Miscellaneous I2C Chip support +# +CONFIG_DS1682=m +CONFIG_SENSORS_EEPROM=y +CONFIG_SENSORS_PCF8574=m +CONFIG_PCF8575=m +CONFIG_SENSORS_PCF8591=m +CONFIG_TPS65010=m +CONFIG_SENSORS_MAX6875=m +CONFIG_SENSORS_TSL2550=m +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +CONFIG_SPI_BITBANG=m +# CONFIG_SPI_BUTTERFLY is not set +# CONFIG_SPI_LM70_LLP is not set + +# +# SPI Protocol Masters +# +CONFIG_SPI_AT25=m +CONFIG_SPI_SPIDEV=m +CONFIG_SPI_TLE62X0=m +CONFIG_W1=m + +# +# 1-wire Bus Masters +# +CONFIG_W1_MASTER_MATROX=m +CONFIG_W1_MASTER_DS2490=m +CONFIG_W1_MASTER_DS2482=m + +# +# 1-wire Slaves +# +CONFIG_W1_SLAVE_THERM=m +CONFIG_W1_SLAVE_SMEM=m +CONFIG_W1_SLAVE_DS2433=m +# CONFIG_W1_SLAVE_DS2433_CRC is not set +CONFIG_W1_SLAVE_DS2760=m +# CONFIG_POWER_SUPPLY is not set +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1029 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_I5K_AMB is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM70 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_MAX6650 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SIS5595 is not set +# CONFIG_SENSORS_DME1737 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_ADS7828 is not set +# CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_VIA686A is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_VT8231 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83L786NG is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +CONFIG_SOFT_WATCHDOG=m +CONFIG_BOOKE_WDT=y + +# +# PCI-based Watchdog Cards +# +# CONFIG_PCIPCWATCHDOG is not set +# CONFIG_WDTPCI is not set + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +CONFIG_SSB=m +CONFIG_SSB_PCIHOST_POSSIBLE=y +CONFIG_SSB_PCIHOST=y +CONFIG_SSB_B43_PCI_BRIDGE=y +# CONFIG_SSB_SILENT is not set +# CONFIG_SSB_DEBUG is not set +CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y +CONFIG_SSB_DRIVER_PCICORE=y + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_AGP is not set +# CONFIG_DRM is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Sound +# +CONFIG_SOUND=m + +# +# Advanced Linux Sound Architecture +# +CONFIG_SND=m +CONFIG_SND_TIMER=m +CONFIG_SND_PCM=m +CONFIG_SND_HWDEP=m +CONFIG_SND_RAWMIDI=m +CONFIG_SND_SEQUENCER=m +CONFIG_SND_SEQ_DUMMY=m +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=m +CONFIG_SND_PCM_OSS=m +CONFIG_SND_PCM_OSS_PLUGINS=y +# CONFIG_SND_SEQUENCER_OSS is not set +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set + +# +# Generic devices +# +CONFIG_SND_MPU401_UART=m +CONFIG_SND_OPL3_LIB=m +CONFIG_SND_VX_LIB=m +CONFIG_SND_AC97_CODEC=m +CONFIG_SND_DUMMY=m +CONFIG_SND_VIRMIDI=m +CONFIG_SND_MTPAV=m +CONFIG_SND_MTS64=m +CONFIG_SND_SERIAL_U16550=m +CONFIG_SND_MPU401=m +CONFIG_SND_PORTMAN2X4=m +CONFIG_SND_SB_COMMON=m +CONFIG_SND_SB16_DSP=m + +# +# PCI devices +# +CONFIG_SND_AD1889=m +CONFIG_SND_ALS300=m +CONFIG_SND_ALS4000=m +CONFIG_SND_ALI5451=m +CONFIG_SND_ATIIXP=m +CONFIG_SND_ATIIXP_MODEM=m +CONFIG_SND_AU8810=m +CONFIG_SND_AU8820=m +CONFIG_SND_AU8830=m +CONFIG_SND_AZT3328=m +CONFIG_SND_BT87X=m +# CONFIG_SND_BT87X_OVERCLOCK is not set +CONFIG_SND_CA0106=m +CONFIG_SND_CMIPCI=m +CONFIG_SND_OXYGEN_LIB=m +CONFIG_SND_OXYGEN=m +CONFIG_SND_CS4281=m +CONFIG_SND_CS46XX=m +CONFIG_SND_CS46XX_NEW_DSP=y +CONFIG_SND_CS5530=m +CONFIG_SND_DARLA20=m +CONFIG_SND_GINA20=m +CONFIG_SND_LAYLA20=m +CONFIG_SND_DARLA24=m +CONFIG_SND_GINA24=m +CONFIG_SND_LAYLA24=m +CONFIG_SND_MONA=m +CONFIG_SND_MIA=m +CONFIG_SND_ECHO3G=m +CONFIG_SND_INDIGO=m +CONFIG_SND_INDIGOIO=m +CONFIG_SND_INDIGODJ=m +CONFIG_SND_EMU10K1=m +CONFIG_SND_EMU10K1X=m +CONFIG_SND_ENS1370=m +CONFIG_SND_ENS1371=m +CONFIG_SND_ES1938=m +CONFIG_SND_ES1968=m +CONFIG_SND_FM801=m +# CONFIG_SND_FM801_TEA575X_BOOL is not set +CONFIG_SND_HDA_INTEL=m +# CONFIG_SND_HDA_HWDEP is not set +CONFIG_SND_HDA_CODEC_REALTEK=y +CONFIG_SND_HDA_CODEC_ANALOG=y +CONFIG_SND_HDA_CODEC_SIGMATEL=y +CONFIG_SND_HDA_CODEC_VIA=y +CONFIG_SND_HDA_CODEC_ATIHDMI=y +CONFIG_SND_HDA_CODEC_CONEXANT=y +CONFIG_SND_HDA_CODEC_CMEDIA=y +CONFIG_SND_HDA_CODEC_SI3054=y +CONFIG_SND_HDA_GENERIC=y +# CONFIG_SND_HDA_POWER_SAVE is not set +CONFIG_SND_HDSP=m +CONFIG_SND_HDSPM=m +CONFIG_SND_HIFIER=m +CONFIG_SND_ICE1712=m +CONFIG_SND_ICE1724=m +CONFIG_SND_INTEL8X0=m +CONFIG_SND_INTEL8X0M=m +CONFIG_SND_KORG1212=m +# CONFIG_SND_KORG1212_FIRMWARE_IN_KERNEL is not set +CONFIG_SND_MAESTRO3=m +CONFIG_SND_MAESTRO3_FIRMWARE_IN_KERNEL=y +CONFIG_SND_MIXART=m +CONFIG_SND_NM256=m +CONFIG_SND_PCXHR=m +CONFIG_SND_RIPTIDE=m +CONFIG_SND_RME32=m +CONFIG_SND_RME96=m +CONFIG_SND_RME9652=m +CONFIG_SND_SONICVIBES=m +CONFIG_SND_TRIDENT=m +CONFIG_SND_VIA82XX=m +CONFIG_SND_VIA82XX_MODEM=m +CONFIG_SND_VIRTUOSO=m +CONFIG_SND_VX222=m +CONFIG_SND_YMFPCI=m +CONFIG_SND_YMFPCI_FIRMWARE_IN_KERNEL=y +# CONFIG_SND_AC97_POWER_SAVE is not set + +# +# ALSA PowerMac devices +# + +# +# ALSA PowerPC devices +# + +# +# SPI devices +# + +# +# USB devices +# +CONFIG_SND_USB_AUDIO=m +CONFIG_SND_USB_USX2Y=m +CONFIG_SND_USB_CAIAQ=m +CONFIG_SND_USB_CAIAQ_INPUT=y + +# +# System on Chip audio support +# +CONFIG_SND_SOC=m + +# +# SoC Audio support for SuperH +# + +# +# ALSA SoC audio for Freescale SOCs +# + +# +# Open Sound System +# +# CONFIG_SOUND_PRIME is not set +CONFIG_AC97_BUS=m +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set + +# +# USB Input Devices +# +# CONFIG_USB_HID is not set + +# +# USB HID Boot Protocol drivers +# +# CONFIG_USB_KBD is not set +# CONFIG_USB_MOUSE is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set + +# +# Miscellaneous USB options +# +# CONFIG_USB_DEVICEFS is not set +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_EHCI_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=y +CONFIG_USB_OHCI_HCD_PPC_OF=y +CONFIG_USB_OHCI_HCD_PPC_OF_BE=y +# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set +CONFIG_USB_OHCI_HCD_PCI=y +CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y +CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_UHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set +CONFIG_USB_MON=y + +# +# USB port drivers +# +# CONFIG_USB_USS720 is not set +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_ATM is not set +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG is not set +# CONFIG_USB_GADGET_DEBUG_FILES is not set +# CONFIG_USB_GADGET_DEBUG_FS is not set +CONFIG_USB_GADGET_SELECTED=y +CONFIG_USB_GADGET_AMD5536UDC=y +CONFIG_USB_AMD5536UDC=y +# CONFIG_USB_GADGET_ATMEL_USBA is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_PXA2XX is not set +# CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +CONFIG_USB_GADGET_DUALSPEED=y +# CONFIG_USB_ZERO is not set +CONFIG_USB_ETH=m +CONFIG_USB_ETH_RNDIS=y +# CONFIG_USB_GADGETFS is not set +# CONFIG_USB_FILE_STORAGE is not set +# CONFIG_USB_G_SERIAL is not set +# CONFIG_USB_MIDI_GADGET is not set +# CONFIG_USB_G_PRINTER is not set +CONFIG_MMC=m +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD Card Drivers +# +CONFIG_MMC_BLOCK=m +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set + +# +# MMC/SD Host Controller Drivers +# +# CONFIG_MMC_SDHCI is not set +# CONFIG_MMC_WBSD is not set +# CONFIG_MMC_TIFM_SD is not set +# CONFIG_MMC_SPI is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_INFINIBAND is not set +# CONFIG_EDAC is not set +# CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set + +# +# Userspace I/O +# +CONFIG_UIO=m +CONFIG_UIO_CIF=m + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set +CONFIG_GENERIC_ACL=y + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +# CONFIG_MSDOS_FS is not set +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +# CONFIG_NFS_V3 is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set +# CONFIG_DLM is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_CRC_CCITT=m +CONFIG_CRC16=m +CONFIG_CRC_ITU_T=m +CONFIG_CRC32=y +CONFIG_CRC7=m +CONFIG_LIBCRC32C=m +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_LZO_COMPRESS=m +CONFIG_LZO_DECOMPRESS=m +CONFIG_TEXTSEARCH=y +CONFIG_TEXTSEARCH_KMP=m +CONFIG_TEXTSEARCH_BM=m +CONFIG_TEXTSEARCH_FSM=m +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_SAMPLES is not set +# CONFIG_DEBUG_STACKOVERFLOW is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_PAGEALLOC is not set +# CONFIG_DEBUGGER is not set +# CONFIG_VIRQ_DEBUG is not set +CONFIG_BDI_SWITCH=y +# CONFIG_PPC_EARLY_DEBUG is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=m +CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_SEQIV=m +CONFIG_CRYPTO_HASH=m +CONFIG_CRYPTO_MANAGER=m +CONFIG_CRYPTO_HMAC=m +CONFIG_CRYPTO_XCBC=m +CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_MD5=m +CONFIG_CRYPTO_SHA1=m +CONFIG_CRYPTO_SHA256=m +CONFIG_CRYPTO_SHA512=m +CONFIG_CRYPTO_WP512=m +CONFIG_CRYPTO_TGR192=m +CONFIG_CRYPTO_GF128MUL=m +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_CBC=m +CONFIG_CRYPTO_PCBC=m +CONFIG_CRYPTO_LRW=m +CONFIG_CRYPTO_XTS=m +CONFIG_CRYPTO_CTR=m +CONFIG_CRYPTO_GCM=m +CONFIG_CRYPTO_CCM=m +CONFIG_CRYPTO_CRYPTD=m +CONFIG_CRYPTO_DES=m +CONFIG_CRYPTO_FCRYPT=m +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_TWOFISH_COMMON=m +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_AES=m +CONFIG_CRYPTO_CAST5=m +CONFIG_CRYPTO_CAST6=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_KHAZAD=m +CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_SEED=m +CONFIG_CRYPTO_SALSA20=m +CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_CRC32C=m +CONFIG_CRYPTO_CAMELLIA=m +CONFIG_CRYPTO_TEST=m +CONFIG_CRYPTO_AUTHENC=m +CONFIG_CRYPTO_LZO=m +CONFIG_CRYPTO_HW=y +CONFIG_CRYPTO_DEV_HIFN_795X=m +CONFIG_CRYPTO_DEV_HIFN_795X_RNG=y +# CONFIG_PPC_CLOCK is not set diff --git a/packages/linux/linux-ixp4xx/defconfig-2.6.24.4 b/packages/linux/linux-ixp4xx/defconfig-2.6.24.4 index 555248c29d..3a3b506d06 100644 --- a/packages/linux/linux-ixp4xx/defconfig-2.6.24.4 +++ b/packages/linux/linux-ixp4xx/defconfig-2.6.24.4 @@ -764,7 +764,7 @@ CONFIG_ISCSI_TCP=m # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set -CONFIG_ATA=m +CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set # CONFIG_SATA_AHCI is not set # CONFIG_SATA_SVW is not set @@ -779,12 +779,12 @@ CONFIG_ATA=m # CONFIG_SATA_SIL24 is not set # CONFIG_SATA_SIS is not set # CONFIG_SATA_ULI is not set -CONFIG_SATA_VIA=m +CONFIG_SATA_VIA=y # CONFIG_SATA_VITESSE is not set # CONFIG_SATA_INIC162X is not set # CONFIG_PATA_ALI is not set # CONFIG_PATA_AMD is not set -CONFIG_PATA_ARTOP=m +CONFIG_PATA_ARTOP=y # CONFIG_PATA_ATIIXP is not set # CONFIG_PATA_CMD640_PCI is not set # CONFIG_PATA_CMD64X is not set diff --git a/packages/linux/linux-ixp4xx_2.6.24.4.bb b/packages/linux/linux-ixp4xx_2.6.24.4.bb index 1964c23839..05aea212e0 100644 --- a/packages/linux/linux-ixp4xx_2.6.24.4.bb +++ b/packages/linux/linux-ixp4xx_2.6.24.4.bb @@ -8,7 +8,7 @@ KERNEL_RELEASE = "2.6.24.4" #PV = "${VANILLA_VERSION}+${KERNEL_RELEASE}+svnr${SRCREV}" PV = "${KERNEL_RELEASE}+svnr${SRCREV}" -PR = "r1" +PR = "r2" SRC_URI = "${KERNELORG_MIRROR}/pub/linux/kernel/v2.6/linux-${VANILLA_VERSION}.tar.bz2 \ ${KERNELORG_MIRROR}/pub/linux/kernel/v2.6/patch-${KERNEL_RELEASE}.bz2;patch=1 \ diff --git a/packages/linux/linux-omap2-git/beagleboard/l2-cache.patch b/packages/linux/linux-omap2-git/beagleboard/l2-cache.patch new file mode 100644 index 0000000000..7e93c29036 --- /dev/null +++ b/packages/linux/linux-omap2-git/beagleboard/l2-cache.patch @@ -0,0 +1,38 @@ +diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig +index 15066c2..70f85c1 100644 +--- a/arch/arm/mm/Kconfig ++++ b/arch/arm/mm/Kconfig +@@ -665,6 +665,12 @@ config CPU_CACHE_ROUND_ROBIN + Say Y here to use the predictable round-robin cache replacement + policy. Unless you specifically require this or are unsure, say N. + ++config CPU_L2CACHE_DISABLE ++ bool "Disable level 2 cache" ++ depends on CPU_V7 ++ help ++ Say Y here to disable the level 2 cache. If unsure, say N. ++ + config CPU_BPREDICT_DISABLE + bool "Disable branch prediction" + depends on CPU_ARM1020 || CPU_V6 || CPU_XSC3 || CPU_V7 +diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S +index a1d7331..432ddab 100644 +--- a/arch/arm/mm/proc-v7.S ++++ b/arch/arm/mm/proc-v7.S +@@ -181,6 +181,16 @@ __v7_setup: + mcr p15, 0, r4, c2, c0, 1 @ load TTB1 + mov r10, #0x1f @ domains 0, 1 = manager + mcr p15, 0, r10, c3, c0, 0 @ load domain access register ++#ifndef CONFIG_CPU_L2CACHE_DISABLE ++ @ L2 cache configuration in the L2 aux control register ++ mrc p15, 1, r10, c9, c0, 2 ++ bic r10, r10, #(1 << 16) @ L2 outer cache ++ mcr p15, 1, r10, c9, c0, 2 ++ @ L2 cache is enabled in the aux control register ++ mrc p15, 0, r10, c1, c0, 1 ++ orr r10, r10, #2 ++ mcr p15, 0, r10, c1, c0, 1 ++#endif + #endif + adr r5, v7_crval + ldmia r5, {r5, r6} diff --git a/packages/linux/linux-omap2_git.bb b/packages/linux/linux-omap2_git.bb index 4a3c3faf01..71bd173541 100644 --- a/packages/linux/linux-omap2_git.bb +++ b/packages/linux/linux-omap2_git.bb @@ -2,10 +2,10 @@ require linux-omap.inc FILESDIR = "${@os.path.dirname(bb.data.getVar('FILE',d,1))}/linux-omap2-git/${MACHINE}" -SRCREV = "59586cd959b31f91f29cf96c1d3f8ff52c3c0607" +SRCREV = "547ba9200727d2334f779cbf46ab62accb1281aa" PV = "2.6.25+git${SRCREV}" -PR = "r6" +PR = "r8" SRC_URI = "git://source.mvista.com/git/linux-omap-2.6.git;protocol=git \ @@ -13,6 +13,7 @@ SRC_URI = "git://source.mvista.com/git/linux-omap-2.6.git;protocol=git \ SRC_URI_append_beagleboard = " file://no-harry-potter.diff;patch=1 \ file://usb-timout.patch;patch=1 \ +# file://l2-cache.patch;patch=1 \ " COMPATIBLE_MACHINE = "omap2430sdp|omap2420h4|beagleboard" diff --git a/packages/linux/linux-rp-2.6.24/defconfig-qemux86 b/packages/linux/linux-rp-2.6.24/defconfig-qemux86 index c143746db8..b91171b1f2 100644 --- a/packages/linux/linux-rp-2.6.24/defconfig-qemux86 +++ b/packages/linux/linux-rp-2.6.24/defconfig-qemux86 @@ -336,7 +336,7 @@ CONFIG_NET=y # # Networking options # -CONFIG_PACKET=m +CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y CONFIG_XFRM=y diff --git a/packages/linux/linux-rp_2.6.24.bb b/packages/linux/linux-rp_2.6.24.bb index 62dca60e2a..3a8eb63eb4 100644 --- a/packages/linux/linux-rp_2.6.24.bb +++ b/packages/linux/linux-rp_2.6.24.bb @@ -1,6 +1,6 @@ require linux-rp.inc -PR = "r9" +PR = "r10" DEFAULT_PREFERENCE = "-1" DEFAULT_PREFERENCE_collie = "1" diff --git a/packages/linux/linux.inc b/packages/linux/linux.inc index a13ace3fac..8dfa25c17a 100644 --- a/packages/linux/linux.inc +++ b/packages/linux/linux.inc @@ -23,6 +23,7 @@ CMDLINE_append = " ${CMDLINE_DEBUG} " KERNEL_DEVICETREE_mpc8313e-rdb = "arch/${ARCH}/boot/dts/mpc8313erdb.dts" KERNEL_DEVICETREE_mpc8323e-rdb = "arch/${ARCH}/boot/dts/mpc832x_rdb.dts" KERNEL_DEVICETREE_kilauea = "arch/${ARCH}/boot/dts/kilauea.dts" +KERNEL_DEVICETREE_sequoia = "arch/${ARCH}/boot/dts/sequoia.dts" KERNEL_DEVICETREE_FLAGS = "-R 8 -S 0x3000" diff --git a/packages/linux/linux_2.6.25.bb b/packages/linux/linux_2.6.25.bb index 4c84ffe7ac..63910cb888 100644 --- a/packages/linux/linux_2.6.25.bb +++ b/packages/linux/linux_2.6.25.bb @@ -4,6 +4,7 @@ require linux.inc DEFAULT_PREFERENCE = "-1" DEFAULT_PREFERENCE_mpc8313e-rdb = "1" DEFAULT_PREFERENCE_kilauea = "1" +DEFAULT_PREFERENCE_sequoia = "1" SRC_URI = "${KERNELORG_MIRROR}/pub/linux/kernel/v2.6/linux-2.6.25.tar.bz2 \ file://defconfig" |