diff options
Diffstat (limited to 'packages/linux')
14 files changed, 75 insertions, 9591 deletions
diff --git a/packages/linux/linux-dht-walnut-2.6.12.6/dht-walnut_defconfig b/packages/linux/linux-dht-walnut-2.6.12.6/dht-walnut_defconfig deleted file mode 100644 index be30ceb938..0000000000 --- a/packages/linux/linux-dht-walnut-2.6.12.6/dht-walnut_defconfig +++ /dev/null @@ -1,2024 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.12.6 -# Thu Jun 8 14:36:36 2006 -# -CONFIG_MMU=y -CONFIG_GENERIC_HARDIRQS=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_HAVE_DEC_LOCK=y -CONFIG_PPC=y -CONFIG_PPC32=y -CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# -CONFIG_LOCALVERSION="" -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -CONFIG_POSIX_MQUEUE=y -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -# CONFIG_AUDIT is not set -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_EMBEDDED=y -CONFIG_KALLSYMS=y -CONFIG_KALLSYMS_EXTRA_PASS=y -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -# CONFIG_EPOLL is not set -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y - -# -# Processor -# -# CONFIG_6xx is not set -CONFIG_40x=y -# CONFIG_44x is not set -# CONFIG_POWER3 is not set -# CONFIG_POWER4 is not set -# CONFIG_8xx is not set -# CONFIG_E500 is not set -CONFIG_MATH_EMULATION=y -# CONFIG_CPU_FREQ is not set -CONFIG_4xx=y - -# -# IBM 4xx options -# -# CONFIG_ASH is not set -# CONFIG_BUBINGA is not set -# CONFIG_CPCI405 is not set -# CONFIG_EP405 is not set -# CONFIG_OAK is not set -# CONFIG_REDWOOD_5 is not set -# CONFIG_REDWOOD_6 is not set -# CONFIG_SYCAMORE is not set -CONFIG_WALNUT=y -# CONFIG_XILINX_ML300 is not set -CONFIG_IBM405_ERR77=y -CONFIG_IBM405_ERR51=y -CONFIG_IBM_OCP=y -CONFIG_BIOS_FIXUP=y -CONFIG_405GP=y -# CONFIG_PPC4xx_DMA is not set -CONFIG_PPC_GEN550=y -# CONFIG_PM is not set -CONFIG_UART0_TTYS0=y -# CONFIG_UART0_TTYS1 is not set -CONFIG_NOT_COHERENT_CACHE=y - -# -# Platform options -# -# CONFIG_PC_KEYBOARD is not set -# CONFIG_SMP is not set -# CONFIG_PREEMPT is not set -# CONFIG_HIGHMEM is not set -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set -CONFIG_CMDLINE_BOOL=y -CONFIG_CMDLINE="ip=on" -CONFIG_ISA_DMA_API=y - -# -# Bus options -# -CONFIG_PCI=y -CONFIG_PCI_DOMAINS=y -CONFIG_PCI_LEGACY_PROC=y -# CONFIG_PCI_NAMES is not set - -# -# PCCARD (PCMCIA/CardBus) support -# -CONFIG_PCCARD=y -# CONFIG_PCMCIA_DEBUG is not set -CONFIG_PCMCIA=y -CONFIG_CARDBUS=y - -# -# PC-card bridges -# -CONFIG_YENTA=m -CONFIG_PD6729=m -CONFIG_I82092=m -CONFIG_TCIC=m -CONFIG_PCCARD_NONSTATIC=m - -# -# Advanced setup -# -# CONFIG_ADVANCED_OPTIONS is not set - -# -# Default settings for advanced configuration options are used -# -CONFIG_HIGHMEM_START=0xfe000000 -CONFIG_LOWMEM_SIZE=0x30000000 -CONFIG_KERNEL_START=0xc0000000 -CONFIG_TASK_SIZE=0x80000000 -CONFIG_CONSISTENT_START=0xff100000 -CONFIG_CONSISTENT_SIZE=0x00200000 -CONFIG_BOOT_LOAD=0x00400000 - -# -# Device Drivers -# - -# -# Generic Driver Options -# -# CONFIG_STANDALONE is not set -CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=m - -# -# Memory Technology Devices (MTD) -# -CONFIG_MTD=m -# CONFIG_MTD_DEBUG is not set -CONFIG_MTD_CONCAT=m -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_REDBOOT_PARTS=m -CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 -# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set -# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set -# CONFIG_MTD_CMDLINE_PARTS is not set - -# -# User Modules And Translation Layers -# -CONFIG_MTD_CHAR=m -CONFIG_MTD_BLOCK=m -CONFIG_MTD_BLOCK_RO=m -CONFIG_FTL=m -CONFIG_NFTL=m -# CONFIG_NFTL_RW is not set -CONFIG_INFTL=m - -# -# RAM/ROM/Flash chip drivers -# -CONFIG_MTD_CFI=m -CONFIG_MTD_JEDECPROBE=m -CONFIG_MTD_GEN_PROBE=m -# CONFIG_MTD_CFI_ADV_OPTIONS is not set -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -CONFIG_MTD_CFI_INTELEXT=m -CONFIG_MTD_CFI_AMDSTD=m -CONFIG_MTD_CFI_AMDSTD_RETRY=0 -CONFIG_MTD_CFI_STAA=m -CONFIG_MTD_CFI_UTIL=m -CONFIG_MTD_RAM=m -CONFIG_MTD_ROM=m -CONFIG_MTD_ABSENT=m -# CONFIG_MTD_XIP is not set - -# -# Mapping drivers for chip access -# -CONFIG_MTD_COMPLEX_MAPPINGS=y -CONFIG_MTD_PHYSMAP=m -CONFIG_MTD_PHYSMAP_START=0x8000000 -CONFIG_MTD_PHYSMAP_LEN=0x4000000 -CONFIG_MTD_PHYSMAP_BANKWIDTH=2 -CONFIG_MTD_WALNUT=m -CONFIG_MTD_PCI=m - -# -# Self-contained MTD device drivers -# -CONFIG_MTD_PMC551=m -CONFIG_MTD_PMC551_BUGFIX=y -# CONFIG_MTD_PMC551_DEBUG is not set -CONFIG_MTD_SLRAM=m -CONFIG_MTD_PHRAM=m -# CONFIG_MTD_MTDRAM is not set -CONFIG_MTD_BLKMTD=m -# CONFIG_MTD_BLOCK2MTD is not set - -# -# Disk-On-Chip Device Drivers -# -CONFIG_MTD_DOC2000=m -CONFIG_MTD_DOC2001=m -CONFIG_MTD_DOC2001PLUS=m -CONFIG_MTD_DOCPROBE=m -CONFIG_MTD_DOCECC=m -# CONFIG_MTD_DOCPROBE_ADVANCED is not set -CONFIG_MTD_DOCPROBE_ADDRESS=0 - -# -# NAND Flash Device Drivers -# -CONFIG_MTD_NAND=m -# CONFIG_MTD_NAND_VERIFY_WRITE is not set -CONFIG_MTD_NAND_IDS=m -CONFIG_MTD_NAND_DISKONCHIP=m -# CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED is not set -CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0 -# CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE is not set -# CONFIG_MTD_NAND_NANDSIM is not set - -# -# Parallel port support -# -CONFIG_PARPORT=m -CONFIG_PARPORT_PC=m -# CONFIG_PARPORT_SERIAL is not set -# CONFIG_PARPORT_PC_FIFO is not set -# CONFIG_PARPORT_PC_SUPERIO is not set -# CONFIG_PARPORT_PC_PCMCIA is not set -CONFIG_PARPORT_NOT_PC=y -# CONFIG_PARPORT_GSC is not set -# CONFIG_PARPORT_1284 is not set - -# -# Plug and Play support -# - -# -# Block devices -# -CONFIG_BLK_DEV_FD=m -CONFIG_PARIDE=m -CONFIG_PARIDE_PARPORT=m - -# -# Parallel IDE high-level drivers -# -CONFIG_PARIDE_PD=m -CONFIG_PARIDE_PCD=m -CONFIG_PARIDE_PF=m -CONFIG_PARIDE_PT=m -CONFIG_PARIDE_PG=m - -# -# Parallel IDE protocol modules -# -CONFIG_PARIDE_ATEN=m -CONFIG_PARIDE_BPCK=m -CONFIG_PARIDE_BPCK6=m -CONFIG_PARIDE_COMM=m -CONFIG_PARIDE_DSTR=m -CONFIG_PARIDE_FIT2=m -CONFIG_PARIDE_FIT3=m -CONFIG_PARIDE_EPAT=m -# CONFIG_PARIDE_EPATC8 is not set -CONFIG_PARIDE_EPIA=m -CONFIG_PARIDE_FRIQ=m -CONFIG_PARIDE_FRPW=m -CONFIG_PARIDE_KBIC=m -CONFIG_PARIDE_KTTI=m -CONFIG_PARIDE_ON20=m -CONFIG_PARIDE_ON26=m -CONFIG_BLK_CPQ_DA=m -CONFIG_BLK_CPQ_CISS_DA=m -# CONFIG_CISS_SCSI_TAPE is not set -CONFIG_BLK_DEV_DAC960=m -CONFIG_BLK_DEV_UMEM=m -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_CRYPTOLOOP=m -CONFIG_BLK_DEV_NBD=m -CONFIG_BLK_DEV_SX8=m -CONFIG_BLK_DEV_UB=m -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" -# CONFIG_LBD is not set -CONFIG_CDROM_PKTCDVD=m -CONFIG_CDROM_PKTCDVD_BUFFERS=8 -# CONFIG_CDROM_PKTCDVD_WCACHE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -CONFIG_ATA_OVER_ETH=m - -# -# ATA/ATAPI/MFM/RLL support -# -CONFIG_IDE=y -CONFIG_BLK_DEV_IDE=y - -# -# Please see Documentation/ide.txt for help/info on IDE drives -# -# CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set -CONFIG_BLK_DEV_IDECS=m -CONFIG_BLK_DEV_IDECD=y -CONFIG_BLK_DEV_IDETAPE=m -CONFIG_BLK_DEV_IDEFLOPPY=m -CONFIG_BLK_DEV_IDESCSI=m -# CONFIG_IDE_TASK_IOCTL is not set - -# -# IDE chipset support/bugfixes -# -CONFIG_IDE_GENERIC=y -CONFIG_BLK_DEV_IDEPCI=y -# CONFIG_IDEPCI_SHARE_IRQ is not set -CONFIG_BLK_DEV_OFFBOARD=y -CONFIG_BLK_DEV_GENERIC=y -CONFIG_BLK_DEV_OPTI621=m -CONFIG_BLK_DEV_SL82C105=m -CONFIG_BLK_DEV_IDEDMA_PCI=y -# CONFIG_BLK_DEV_IDEDMA_FORCED is not set -CONFIG_IDEDMA_PCI_AUTO=y -# CONFIG_IDEDMA_ONLYDISK is not set -CONFIG_BLK_DEV_AEC62XX=m -CONFIG_BLK_DEV_ALI15X3=m -# CONFIG_WDC_ALI15X3 is not set -CONFIG_BLK_DEV_AMD74XX=m -CONFIG_BLK_DEV_CMD64X=m -CONFIG_BLK_DEV_TRIFLEX=m -CONFIG_BLK_DEV_CY82C693=m -CONFIG_BLK_DEV_CS5520=m -CONFIG_BLK_DEV_CS5530=m -CONFIG_BLK_DEV_HPT34X=m -# CONFIG_HPT34X_AUTODMA is not set -CONFIG_BLK_DEV_HPT366=m -CONFIG_BLK_DEV_SC1200=m -CONFIG_BLK_DEV_PIIX=m -CONFIG_BLK_DEV_NS87415=m -CONFIG_BLK_DEV_PDC202XX_OLD=y -# CONFIG_PDC202XX_BURST is not set -CONFIG_BLK_DEV_PDC202XX_NEW=m -# CONFIG_PDC202XX_FORCE is not set -CONFIG_BLK_DEV_SVWKS=m -CONFIG_BLK_DEV_SIIMAGE=m -CONFIG_BLK_DEV_SLC90E66=m -CONFIG_BLK_DEV_TRM290=m -CONFIG_BLK_DEV_VIA82CXXX=m -# CONFIG_IDE_ARM is not set -CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_IDEDMA_IVB is not set -CONFIG_IDEDMA_AUTO=y -# CONFIG_BLK_DEV_HD is not set - -# -# SCSI device support -# -CONFIG_SCSI=y -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=y -# CONFIG_CHR_DEV_ST is not set -# CONFIG_CHR_DEV_OSST is not set -CONFIG_BLK_DEV_SR=y -# CONFIG_BLK_DEV_SR_VENDOR is not set -CONFIG_CHR_DEV_SG=y - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -CONFIG_SCSI_MULTI_LUN=y -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_LOGGING is not set - -# -# SCSI Transport Attributes -# -CONFIG_SCSI_SPI_ATTRS=m -CONFIG_SCSI_FC_ATTRS=m -# CONFIG_SCSI_ISCSI_ATTRS is not set - -# -# SCSI low-level drivers -# -CONFIG_BLK_DEV_3W_XXXX_RAID=m -CONFIG_SCSI_3W_9XXX=m -CONFIG_SCSI_ACARD=m -CONFIG_SCSI_AACRAID=m -CONFIG_SCSI_AIC7XXX=m -CONFIG_AIC7XXX_CMDS_PER_DEVICE=32 -CONFIG_AIC7XXX_RESET_DELAY_MS=15000 -CONFIG_AIC7XXX_DEBUG_ENABLE=y -CONFIG_AIC7XXX_DEBUG_MASK=0 -CONFIG_AIC7XXX_REG_PRETTY_PRINT=y -CONFIG_SCSI_AIC7XXX_OLD=m -CONFIG_SCSI_AIC79XX=m -CONFIG_AIC79XX_CMDS_PER_DEVICE=32 -CONFIG_AIC79XX_RESET_DELAY_MS=15000 -# CONFIG_AIC79XX_ENABLE_RD_STRM is not set -CONFIG_AIC79XX_DEBUG_ENABLE=y -CONFIG_AIC79XX_DEBUG_MASK=0 -CONFIG_AIC79XX_REG_PRETTY_PRINT=y -CONFIG_SCSI_DPT_I2O=m -# CONFIG_MEGARAID_NEWGEN is not set -CONFIG_MEGARAID_LEGACY=m -# CONFIG_SCSI_SATA is not set -CONFIG_SCSI_BUSLOGIC=m -# CONFIG_SCSI_OMIT_FLASHPOINT is not set -CONFIG_SCSI_DMX3191D=m -CONFIG_SCSI_EATA=m -# CONFIG_SCSI_EATA_TAGGED_QUEUE is not set -# CONFIG_SCSI_EATA_LINKED_COMMANDS is not set -CONFIG_SCSI_EATA_MAX_TAGS=16 -# CONFIG_SCSI_FUTURE_DOMAIN is not set -CONFIG_SCSI_GDTH=m -CONFIG_SCSI_IPS=m -CONFIG_SCSI_INITIO=m -CONFIG_SCSI_INIA100=m -CONFIG_SCSI_PPA=m -CONFIG_SCSI_IMM=m -# CONFIG_SCSI_IZIP_EPP16 is not set -# CONFIG_SCSI_IZIP_SLOW_CTR is not set -CONFIG_SCSI_SYM53C8XX_2=m -CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1 -CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 -CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 -# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set -CONFIG_SCSI_IPR=m -# CONFIG_SCSI_IPR_TRACE is not set -# CONFIG_SCSI_IPR_DUMP is not set -CONFIG_SCSI_QLOGIC_FC=m -# CONFIG_SCSI_QLOGIC_FC_FIRMWARE is not set -CONFIG_SCSI_QLOGIC_1280=m -# CONFIG_SCSI_QLOGIC_1280_1040 is not set -CONFIG_SCSI_QLA2XXX=y -CONFIG_SCSI_QLA21XX=m -CONFIG_SCSI_QLA22XX=m -CONFIG_SCSI_QLA2300=m -CONFIG_SCSI_QLA2322=m -CONFIG_SCSI_QLA6312=m -CONFIG_SCSI_LPFC=m -CONFIG_SCSI_DC395x=m -CONFIG_SCSI_DC390T=m -CONFIG_SCSI_NSP32=m -CONFIG_SCSI_DEBUG=m - -# -# PCMCIA SCSI adapter support -# -CONFIG_PCMCIA_AHA152X=m -CONFIG_PCMCIA_FDOMAIN=m -CONFIG_PCMCIA_NINJA_SCSI=m -CONFIG_PCMCIA_QLOGIC=m -CONFIG_PCMCIA_SYM53C500=m - -# -# Multi-device support (RAID and LVM) -# -CONFIG_MD=y -CONFIG_BLK_DEV_MD=m -CONFIG_MD_LINEAR=m -CONFIG_MD_RAID0=m -CONFIG_MD_RAID1=m -CONFIG_MD_RAID10=m -CONFIG_MD_RAID5=m -CONFIG_MD_RAID6=m -CONFIG_MD_MULTIPATH=m -CONFIG_MD_FAULTY=m -CONFIG_BLK_DEV_DM=m -CONFIG_DM_CRYPT=m -CONFIG_DM_SNAPSHOT=m -CONFIG_DM_MIRROR=m -CONFIG_DM_ZERO=m -CONFIG_DM_MULTIPATH=m -CONFIG_DM_MULTIPATH_EMC=m - -# -# Fusion MPT device support -# -CONFIG_FUSION=m -CONFIG_FUSION_MAX_SGE=40 -CONFIG_FUSION_CTL=m - -# -# IEEE 1394 (FireWire) support -# -CONFIG_IEEE1394=m - -# -# Subsystem Options -# -# CONFIG_IEEE1394_VERBOSEDEBUG is not set -# CONFIG_IEEE1394_OUI_DB is not set -CONFIG_IEEE1394_EXTRA_CONFIG_ROMS=y -CONFIG_IEEE1394_CONFIG_ROM_IP1394=y - -# -# Device Drivers -# -CONFIG_IEEE1394_PCILYNX=m -CONFIG_IEEE1394_OHCI1394=m - -# -# Protocol Drivers -# -CONFIG_IEEE1394_VIDEO1394=m -CONFIG_IEEE1394_SBP2=m -CONFIG_IEEE1394_SBP2_PHYS_DMA=y -CONFIG_IEEE1394_ETH1394=m -CONFIG_IEEE1394_DV1394=m -CONFIG_IEEE1394_RAWIO=m -CONFIG_IEEE1394_CMP=m -CONFIG_IEEE1394_AMDTP=m - -# -# I2O device support -# -# CONFIG_I2O is not set - -# -# Macintosh device drivers -# - -# -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_ADVANCED_ROUTER=y -CONFIG_IP_MULTIPLE_TABLES=y -# CONFIG_IP_ROUTE_FWMARK is not set -CONFIG_IP_ROUTE_MULTIPATH=y -# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set -CONFIG_IP_ROUTE_VERBOSE=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -CONFIG_IP_PNP_RARP=y -CONFIG_NET_IPIP=m -CONFIG_NET_IPGRE=m -CONFIG_NET_IPGRE_BROADCAST=y -CONFIG_IP_MROUTE=y -# CONFIG_IP_PIMSM_V1 is not set -# CONFIG_IP_PIMSM_V2 is not set -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -CONFIG_INET_AH=m -CONFIG_INET_ESP=m -CONFIG_INET_IPCOMP=m -CONFIG_INET_TUNNEL=m -CONFIG_IP_TCPDIAG=y -# CONFIG_IP_TCPDIAG_IPV6 is not set - -# -# IP: Virtual Server Configuration -# -# CONFIG_IP_VS is not set -CONFIG_IPV6=m -# CONFIG_IPV6_PRIVACY is not set -CONFIG_INET6_AH=m -CONFIG_INET6_ESP=m -CONFIG_INET6_IPCOMP=m -CONFIG_INET6_TUNNEL=m -CONFIG_IPV6_TUNNEL=m -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set -CONFIG_BRIDGE_NETFILTER=y - -# -# IP: Netfilter Configuration -# -CONFIG_IP_NF_CONNTRACK=m -CONFIG_IP_NF_CT_ACCT=y -CONFIG_IP_NF_CONNTRACK_MARK=y -CONFIG_IP_NF_CT_PROTO_SCTP=m -CONFIG_IP_NF_FTP=m -CONFIG_IP_NF_IRC=m -CONFIG_IP_NF_TFTP=m -CONFIG_IP_NF_AMANDA=m -CONFIG_IP_NF_QUEUE=m -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_LIMIT=m -CONFIG_IP_NF_MATCH_IPRANGE=m -CONFIG_IP_NF_MATCH_MAC=m -CONFIG_IP_NF_MATCH_PKTTYPE=m -CONFIG_IP_NF_MATCH_MARK=m -CONFIG_IP_NF_MATCH_MULTIPORT=m -CONFIG_IP_NF_MATCH_TOS=m -CONFIG_IP_NF_MATCH_RECENT=m -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_DSCP=m -CONFIG_IP_NF_MATCH_AH_ESP=m -CONFIG_IP_NF_MATCH_LENGTH=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_TCPMSS=m -CONFIG_IP_NF_MATCH_HELPER=m -CONFIG_IP_NF_MATCH_STATE=m -CONFIG_IP_NF_MATCH_CONNTRACK=m -CONFIG_IP_NF_MATCH_OWNER=m -CONFIG_IP_NF_MATCH_PHYSDEV=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m -CONFIG_IP_NF_MATCH_REALM=m -CONFIG_IP_NF_MATCH_SCTP=m -CONFIG_IP_NF_MATCH_COMMENT=m -CONFIG_IP_NF_MATCH_CONNMARK=m -CONFIG_IP_NF_MATCH_HASHLIMIT=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m -CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_TARGET_TCPMSS=m -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_IP_NF_TARGET_NETMAP=m -CONFIG_IP_NF_TARGET_SAME=m -CONFIG_IP_NF_NAT_SNMP_BASIC=m -CONFIG_IP_NF_NAT_IRC=m -CONFIG_IP_NF_NAT_FTP=m -CONFIG_IP_NF_NAT_TFTP=m -CONFIG_IP_NF_NAT_AMANDA=m -CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_TOS=m -CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_DSCP=m -CONFIG_IP_NF_TARGET_MARK=m -CONFIG_IP_NF_TARGET_CLASSIFY=m -CONFIG_IP_NF_TARGET_CONNMARK=m -CONFIG_IP_NF_TARGET_CLUSTERIP=m -CONFIG_IP_NF_RAW=m -CONFIG_IP_NF_TARGET_NOTRACK=m -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -CONFIG_IP_NF_ARP_MANGLE=m - -# -# IPv6: Netfilter Configuration (EXPERIMENTAL) -# -CONFIG_IP6_NF_QUEUE=m -CONFIG_IP6_NF_IPTABLES=m -CONFIG_IP6_NF_MATCH_LIMIT=m -CONFIG_IP6_NF_MATCH_MAC=m -CONFIG_IP6_NF_MATCH_RT=m -CONFIG_IP6_NF_MATCH_OPTS=m -CONFIG_IP6_NF_MATCH_FRAG=m -CONFIG_IP6_NF_MATCH_HL=m -CONFIG_IP6_NF_MATCH_MULTIPORT=m -CONFIG_IP6_NF_MATCH_OWNER=m -CONFIG_IP6_NF_MATCH_MARK=m -CONFIG_IP6_NF_MATCH_IPV6HEADER=m -CONFIG_IP6_NF_MATCH_AHESP=m -CONFIG_IP6_NF_MATCH_LENGTH=m -CONFIG_IP6_NF_MATCH_EUI64=m -# CONFIG_IP6_NF_MATCH_PHYSDEV is not set -CONFIG_IP6_NF_FILTER=m -CONFIG_IP6_NF_TARGET_LOG=m -CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_TARGET_MARK=m -CONFIG_IP6_NF_RAW=m - -# -# DECnet: Netfilter Configuration -# -# CONFIG_DECNET_NF_GRABULATOR is not set - -# -# Bridge: Netfilter Configuration -# -CONFIG_BRIDGE_NF_EBTABLES=m -CONFIG_BRIDGE_EBT_BROUTE=m -CONFIG_BRIDGE_EBT_T_FILTER=m -CONFIG_BRIDGE_EBT_T_NAT=m -CONFIG_BRIDGE_EBT_802_3=m -CONFIG_BRIDGE_EBT_AMONG=m -CONFIG_BRIDGE_EBT_ARP=m -CONFIG_BRIDGE_EBT_IP=m -CONFIG_BRIDGE_EBT_LIMIT=m -CONFIG_BRIDGE_EBT_MARK=m -CONFIG_BRIDGE_EBT_PKTTYPE=m -CONFIG_BRIDGE_EBT_STP=m -CONFIG_BRIDGE_EBT_VLAN=m -CONFIG_BRIDGE_EBT_ARPREPLY=m -CONFIG_BRIDGE_EBT_DNAT=m -CONFIG_BRIDGE_EBT_MARK_T=m -CONFIG_BRIDGE_EBT_REDIRECT=m -CONFIG_BRIDGE_EBT_SNAT=m -CONFIG_BRIDGE_EBT_LOG=m -CONFIG_BRIDGE_EBT_ULOG=m -CONFIG_XFRM=y -CONFIG_XFRM_USER=m - -# -# SCTP Configuration (EXPERIMENTAL) -# -CONFIG_IP_SCTP=m -# CONFIG_SCTP_DBG_MSG is not set -# CONFIG_SCTP_DBG_OBJCNT is not set -# CONFIG_SCTP_HMAC_NONE is not set -# CONFIG_SCTP_HMAC_SHA1 is not set -CONFIG_SCTP_HMAC_MD5=y -CONFIG_ATM=m -CONFIG_ATM_CLIP=m -# CONFIG_ATM_CLIP_NO_ICMP is not set -CONFIG_ATM_LANE=m -CONFIG_ATM_MPOA=m -CONFIG_ATM_BR2684=m -# CONFIG_ATM_BR2684_IPFILTER is not set -CONFIG_BRIDGE=m -CONFIG_VLAN_8021Q=m -CONFIG_DECNET=m -# CONFIG_DECNET_ROUTER is not set -CONFIG_LLC=m -CONFIG_LLC2=m -CONFIG_IPX=m -# CONFIG_IPX_INTERN is not set -CONFIG_ATALK=m -# CONFIG_DEV_APPLETALK is not set -CONFIG_X25=m -CONFIG_LAPB=m -# CONFIG_NET_DIVERT is not set -CONFIG_ECONET=m -# CONFIG_ECONET_AUNUDP is not set -# CONFIG_ECONET_NATIVE is not set -CONFIG_WAN_ROUTER=m - -# -# QoS and/or fair queueing -# -CONFIG_NET_SCHED=y -CONFIG_NET_SCH_CLK_JIFFIES=y -# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set -# CONFIG_NET_SCH_CLK_CPU is not set -CONFIG_NET_SCH_CBQ=m -CONFIG_NET_SCH_HTB=m -CONFIG_NET_SCH_HFSC=m -CONFIG_NET_SCH_ATM=m -CONFIG_NET_SCH_PRIO=m -CONFIG_NET_SCH_RED=m -CONFIG_NET_SCH_SFQ=m -CONFIG_NET_SCH_TEQL=m -CONFIG_NET_SCH_TBF=m -CONFIG_NET_SCH_GRED=m -CONFIG_NET_SCH_DSMARK=m -CONFIG_NET_SCH_NETEM=m -CONFIG_NET_SCH_INGRESS=m -CONFIG_NET_QOS=y -CONFIG_NET_ESTIMATOR=y -CONFIG_NET_CLS=y -CONFIG_NET_CLS_BASIC=m -CONFIG_NET_CLS_TCINDEX=m -CONFIG_NET_CLS_ROUTE4=m -CONFIG_NET_CLS_ROUTE=y -CONFIG_NET_CLS_FW=m -CONFIG_NET_CLS_U32=m -# CONFIG_CLS_U32_PERF is not set -# CONFIG_NET_CLS_IND is not set -# CONFIG_CLS_U32_MARK is not set -CONFIG_NET_CLS_RSVP=m -CONFIG_NET_CLS_RSVP6=m -# CONFIG_NET_EMATCH is not set -# CONFIG_NET_CLS_ACT is not set -CONFIG_NET_CLS_POLICE=y - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -CONFIG_NETPOLL=y -# CONFIG_NETPOLL_RX is not set -# CONFIG_NETPOLL_TRAP is not set -CONFIG_NET_POLL_CONTROLLER=y -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -CONFIG_BONDING=m -CONFIG_EQUALIZER=m -CONFIG_TUN=m - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -CONFIG_NET_VENDOR_3COM=y -CONFIG_VORTEX=m -CONFIG_TYPHOON=m - -# -# Tulip family network device support -# -CONFIG_NET_TULIP=y -CONFIG_DE2104X=m -CONFIG_TULIP=m -# CONFIG_TULIP_MWI is not set -# CONFIG_TULIP_MMIO is not set -# CONFIG_TULIP_NAPI is not set -CONFIG_DE4X5=m -CONFIG_WINBOND_840=m -CONFIG_DM9102=m -CONFIG_PCMCIA_XIRCOM=m -CONFIG_PCMCIA_XIRTULIP=m -CONFIG_HP100=m -CONFIG_IBM_EMAC=y -# CONFIG_IBM_EMAC_ERRMSG is not set -CONFIG_IBM_EMAC_RXB=128 -CONFIG_IBM_EMAC_TXB=64 -CONFIG_IBM_EMAC_FGAP=8 -CONFIG_IBM_EMAC_SKBRES=0 -CONFIG_NET_PCI=y -CONFIG_PCNET32=m -CONFIG_AMD8111_ETH=m -# CONFIG_AMD8111E_NAPI is not set -CONFIG_ADAPTEC_STARFIRE=m -# CONFIG_ADAPTEC_STARFIRE_NAPI is not set -CONFIG_B44=m -CONFIG_FORCEDETH=m -CONFIG_DGRS=m -CONFIG_EEPRO100=m -CONFIG_E100=m -CONFIG_FEALNX=m -CONFIG_NATSEMI=m -CONFIG_NE2K_PCI=m -CONFIG_8139CP=m -CONFIG_8139TOO=m -# CONFIG_8139TOO_PIO is not set -# CONFIG_8139TOO_TUNE_TWISTER is not set -# CONFIG_8139TOO_8129 is not set -# CONFIG_8139_OLD_RX_RESET is not set -CONFIG_SIS900=m -CONFIG_EPIC100=m -CONFIG_SUNDANCE=m -# CONFIG_SUNDANCE_MMIO is not set -CONFIG_TLAN=m -CONFIG_VIA_RHINE=m -# CONFIG_VIA_RHINE_MMIO is not set - -# -# Ethernet (1000 Mbit) -# -CONFIG_ACENIC=m -# CONFIG_ACENIC_OMIT_TIGON_I is not set -CONFIG_DL2K=m -CONFIG_E1000=m -# CONFIG_E1000_NAPI is not set -CONFIG_NS83820=m -CONFIG_HAMACHI=m -CONFIG_YELLOWFIN=m -CONFIG_R8169=m -# CONFIG_R8169_NAPI is not set -# CONFIG_R8169_VLAN is not set -CONFIG_SK98LIN=m -CONFIG_VIA_VELOCITY=m -CONFIG_TIGON3=m -CONFIG_BNX2=m - -# -# Ethernet (10000 Mbit) -# -# CONFIG_IXGB is not set -# CONFIG_S2IO is not set - -# -# Token Ring devices -# -# CONFIG_TR is not set - -# -# Wireless LAN (non-hamradio) -# -CONFIG_NET_RADIO=y - -# -# Obsolete Wireless cards support (pre-802.11) -# -CONFIG_STRIP=m -CONFIG_PCMCIA_WAVELAN=m -CONFIG_PCMCIA_NETWAVE=m - -# -# Wireless 802.11 Frequency Hopping cards support -# -CONFIG_PCMCIA_RAYCS=m - -# -# Wireless 802.11b ISA/PCI cards support -# -CONFIG_HERMES=m -CONFIG_PLX_HERMES=m -CONFIG_TMD_HERMES=m -CONFIG_PCI_HERMES=m -CONFIG_ATMEL=m -CONFIG_PCI_ATMEL=m - -# -# Wireless 802.11b Pcmcia/Cardbus cards support -# -CONFIG_PCMCIA_HERMES=m -CONFIG_AIRO_CS=m -CONFIG_PCMCIA_ATMEL=m -CONFIG_PCMCIA_WL3501=m - -# -# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support -# -CONFIG_PRISM54=m -CONFIG_NET_WIRELESS=y - -# -# PCMCIA network device support -# -CONFIG_NET_PCMCIA=y -CONFIG_PCMCIA_3C589=m -CONFIG_PCMCIA_3C574=m -CONFIG_PCMCIA_FMVJ18X=m -CONFIG_PCMCIA_PCNET=m -CONFIG_PCMCIA_NMCLAN=m -CONFIG_PCMCIA_SMC91C92=m -CONFIG_PCMCIA_XIRC2PS=m -CONFIG_PCMCIA_AXNET=m - -# -# Wan interfaces -# -CONFIG_WAN=y -CONFIG_DSCC4=m -# CONFIG_DSCC4_PCISYNC is not set -# CONFIG_DSCC4_PCI_RST is not set -CONFIG_LANMEDIA=m -CONFIG_SYNCLINK_SYNCPPP=m -CONFIG_HDLC=m -# CONFIG_HDLC_RAW is not set -# CONFIG_HDLC_RAW_ETH is not set -# CONFIG_HDLC_CISCO is not set -# CONFIG_HDLC_FR is not set -# CONFIG_HDLC_PPP is not set -# CONFIG_HDLC_X25 is not set -CONFIG_PCI200SYN=m -CONFIG_WANXL=m -CONFIG_PC300=m - -# -# Cyclades-PC300 MLPPP support is disabled. -# - -# -# Refer to the file README.mlppp, provided by PC300 package. -# -CONFIG_FARSYNC=m -CONFIG_DLCI=m -CONFIG_DLCI_COUNT=24 -CONFIG_DLCI_MAX=8 -# CONFIG_WAN_ROUTER_DRIVERS is not set -CONFIG_LAPBETHER=m -CONFIG_X25_ASY=m - -# -# ATM drivers -# -# CONFIG_ATM_TCP is not set -# CONFIG_ATM_LANAI is not set -# CONFIG_ATM_ENI is not set -# CONFIG_ATM_FIRESTREAM is not set -# CONFIG_ATM_ZATM is not set -# CONFIG_ATM_NICSTAR is not set -# CONFIG_ATM_IDT77252 is not set -# CONFIG_ATM_AMBASSADOR is not set -# CONFIG_ATM_HORIZON is not set -# CONFIG_ATM_IA is not set -# CONFIG_ATM_FORE200E_MAYBE is not set -# CONFIG_ATM_HE is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -# CONFIG_PLIP is not set -CONFIG_PPP=m -CONFIG_PPP_MULTILINK=y -CONFIG_PPP_FILTER=y -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_BSDCOMP=m -CONFIG_PPP_MPPE_MPPC=m -CONFIG_PPPOE=m -CONFIG_PPPOATM=m -CONFIG_SLIP=m -CONFIG_SLIP_COMPRESSED=y -CONFIG_SLIP_SMART=y -# CONFIG_SLIP_MODE_SLIP6 is not set -# CONFIG_NET_FC is not set -CONFIG_SHAPER=m -CONFIG_NETCONSOLE=m - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set - -# -# Input device support -# -CONFIG_INPUT=y - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_PSAUX=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -CONFIG_INPUT_JOYDEV=y -# CONFIG_INPUT_TSDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -CONFIG_INPUT_KEYBOARD=y -# CONFIG_KEYBOARD_ATKBD is not set -# CONFIG_KEYBOARD_SUNKBD is not set -# CONFIG_KEYBOARD_LKKBD is not set -# CONFIG_KEYBOARD_XTKBD is not set -# CONFIG_KEYBOARD_NEWTON is not set -CONFIG_INPUT_MOUSE=y -# CONFIG_MOUSE_PS2 is not set -# CONFIG_MOUSE_SERIAL is not set -# CONFIG_MOUSE_VSXXXAA is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -CONFIG_SERIO=y -# CONFIG_SERIO_I8042 is not set -# CONFIG_SERIO_SERPORT is not set -# CONFIG_SERIO_PARKBD is not set -# CONFIG_SERIO_PCIPS2 is not set -# CONFIG_SERIO_LIBPS2 is not set -# CONFIG_SERIO_RAW is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_HW_CONSOLE=y -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -# CONFIG_SERIAL_8250_CS is not set -CONFIG_SERIAL_8250_NR_UARTS=4 -# CONFIG_SERIAL_8250_EXTENDED is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_JSM is not set -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 -CONFIG_PRINTER=m -# CONFIG_LP_CONSOLE is not set -CONFIG_PPDEV=m -CONFIG_TIPAR=m - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -CONFIG_WATCHDOG=y -# CONFIG_WATCHDOG_NOWAYOUT is not set - -# -# Watchdog Device Drivers -# -CONFIG_SOFT_WATCHDOG=m - -# -# PCI-based Watchdog Cards -# -CONFIG_PCIPCWATCHDOG=m -CONFIG_WDTPCI=m -# CONFIG_WDT_501_PCI is not set - -# -# USB-based Watchdog Cards -# -CONFIG_USBPCWATCHDOG=m -CONFIG_NVRAM=m -CONFIG_GEN_RTC=m -# CONFIG_GEN_RTC_X is not set -CONFIG_DTLK=m -CONFIG_R3964=m -CONFIG_APPLICOM=m - -# -# Ftape, the floppy tape device driver -# -CONFIG_AGP=m -CONFIG_DRM=m -CONFIG_DRM_TDFX=m -CONFIG_DRM_R128=m -CONFIG_DRM_RADEON=m -CONFIG_DRM_MGA=m -CONFIG_DRM_SIS=m - -# -# PCMCIA character devices -# -CONFIG_SYNCLINK_CS=m -CONFIG_RAW_DRIVER=m -CONFIG_MAX_RAW_DEVS=256 - -# -# TPM devices -# -CONFIG_TCG_TPM=m -CONFIG_TCG_NSC=m -CONFIG_TCG_ATMEL=m - -# -# I2C support -# -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y - -# -# I2C Algorithms -# -CONFIG_I2C_ALGOBIT=y -CONFIG_I2C_ALGOPCF=m -CONFIG_I2C_ALGOPCA=m - -# -# I2C Hardware Bus support -# -# CONFIG_I2C_ALI1535 is not set -# CONFIG_I2C_ALI1563 is not set -# CONFIG_I2C_ALI15X3 is not set -# CONFIG_I2C_AMD756 is not set -# CONFIG_I2C_AMD8111 is not set -# CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set -# CONFIG_I2C_PIIX4 is not set -CONFIG_I2C_IBM_IIC=y -CONFIG_I2C_ISA=m -# CONFIG_I2C_MPC is not set -# CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_PARPORT is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_SCx200_ACB is not set -# CONFIG_I2C_SIS5595 is not set -# CONFIG_I2C_SIS630 is not set -# CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_VIA is not set -# CONFIG_I2C_VIAPRO is not set -# CONFIG_I2C_VOODOO3 is not set -# CONFIG_I2C_PCA_ISA is not set - -# -# Hardware Sensors Chip support -# -CONFIG_I2C_SENSOR=m -CONFIG_SENSORS_ADM1021=m -CONFIG_SENSORS_ADM1025=m -CONFIG_SENSORS_ADM1026=m -CONFIG_SENSORS_ADM1031=m -CONFIG_SENSORS_ASB100=m -CONFIG_SENSORS_DS1621=m -CONFIG_SENSORS_FSCHER=m -CONFIG_SENSORS_FSCPOS=m -CONFIG_SENSORS_GL518SM=m -CONFIG_SENSORS_GL520SM=m -CONFIG_SENSORS_IT87=m -CONFIG_SENSORS_LM63=m -CONFIG_SENSORS_LM75=m -CONFIG_SENSORS_LM77=m -CONFIG_SENSORS_LM78=m -CONFIG_SENSORS_LM80=m -CONFIG_SENSORS_LM83=m -CONFIG_SENSORS_LM85=m -CONFIG_SENSORS_LM87=m -CONFIG_SENSORS_LM90=m -CONFIG_SENSORS_LM92=m -CONFIG_SENSORS_MAX1619=m -CONFIG_SENSORS_PC87360=m -CONFIG_SENSORS_SMSC47B397=m -CONFIG_SENSORS_SIS5595=m -CONFIG_SENSORS_SMSC47M1=m -CONFIG_SENSORS_VIA686A=m -CONFIG_SENSORS_W83781D=m -CONFIG_SENSORS_W83L785TS=m -CONFIG_SENSORS_W83627HF=m - -# -# Other I2C Chip support -# -CONFIG_SENSORS_DS1337=m -CONFIG_SENSORS_EEPROM=m -CONFIG_SENSORS_PCF8574=m -CONFIG_SENSORS_PCF8591=m -CONFIG_SENSORS_RTC8564=m -CONFIG_SENSORS_M41T00=m -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set - -# -# Dallas's 1-wire bus -# -# CONFIG_W1 is not set - -# -# Misc devices -# - -# -# Multimedia devices -# -CONFIG_VIDEO_DEV=m - -# -# Video For Linux -# - -# -# Video Adapters -# -CONFIG_VIDEO_BT848=m -CONFIG_VIDEO_BWQCAM=m -CONFIG_VIDEO_CQCAM=m -CONFIG_VIDEO_CPIA=m -CONFIG_VIDEO_CPIA_USB=m -CONFIG_VIDEO_SAA5246A=m -CONFIG_VIDEO_SAA5249=m -CONFIG_TUNER_3036=m -CONFIG_VIDEO_STRADIS=m -CONFIG_VIDEO_ZORAN=m -CONFIG_VIDEO_ZORAN_BUZ=m -CONFIG_VIDEO_ZORAN_DC10=m -CONFIG_VIDEO_ZORAN_DC30=m -CONFIG_VIDEO_ZORAN_LML33=m -CONFIG_VIDEO_ZORAN_LML33R10=m -CONFIG_VIDEO_SAA7134=m -# CONFIG_VIDEO_SAA7134_DVB is not set -CONFIG_VIDEO_MXB=m -CONFIG_VIDEO_DPC=m -CONFIG_VIDEO_HEXIUM_ORION=m -CONFIG_VIDEO_HEXIUM_GEMINI=m -CONFIG_VIDEO_CX88=m -# CONFIG_VIDEO_CX88_DVB is not set -CONFIG_VIDEO_OVCAMCHIP=m - -# -# Radio Adapters -# -CONFIG_RADIO_GEMTEK_PCI=m -CONFIG_RADIO_MAXIRADIO=m -CONFIG_RADIO_MAESTRO=m - -# -# Digital Video Broadcasting Devices -# -CONFIG_DVB=y -CONFIG_DVB_CORE=m - -# -# Supported SAA7146 based PCI Adapters -# -CONFIG_DVB_AV7110=m -# CONFIG_DVB_AV7110_FIRMWARE is not set -CONFIG_DVB_AV7110_OSD=y -CONFIG_DVB_BUDGET=m -CONFIG_DVB_BUDGET_CI=m -CONFIG_DVB_BUDGET_AV=m -CONFIG_DVB_BUDGET_PATCH=m - -# -# Supported USB Adapters -# -CONFIG_DVB_TTUSB_BUDGET=m -CONFIG_DVB_TTUSB_DEC=m -CONFIG_DVB_DIBUSB=m -# CONFIG_DVB_DIBUSB_MISDESIGNED_DEVICES is not set -# CONFIG_DVB_DIBCOM_DEBUG is not set -CONFIG_DVB_CINERGYT2=m -# CONFIG_DVB_CINERGYT2_TUNING is not set - -# -# Supported FlexCopII (B2C2) Adapters -# -CONFIG_DVB_B2C2_FLEXCOP=m -CONFIG_DVB_B2C2_FLEXCOP_PCI=m -CONFIG_DVB_B2C2_FLEXCOP_USB=m -# CONFIG_DVB_B2C2_FLEXCOP_DEBUG is not set -CONFIG_DVB_B2C2_SKYSTAR=m - -# -# Supported BT878 Adapters -# -CONFIG_DVB_BT8XX=m - -# -# Supported DVB Frontends -# - -# -# Customise DVB Frontends -# - -# -# DVB-S (satellite) frontends -# -CONFIG_DVB_STV0299=m -CONFIG_DVB_CX24110=m -CONFIG_DVB_TDA8083=m -CONFIG_DVB_TDA80XX=m -CONFIG_DVB_MT312=m -CONFIG_DVB_VES1X93=m - -# -# DVB-T (terrestrial) frontends -# -CONFIG_DVB_SP8870=m -CONFIG_DVB_SP887X=m -CONFIG_DVB_CX22700=m -CONFIG_DVB_CX22702=m -CONFIG_DVB_L64781=m -CONFIG_DVB_TDA1004X=m -CONFIG_DVB_NXT6000=m -CONFIG_DVB_MT352=m -CONFIG_DVB_DIB3000MB=m -CONFIG_DVB_DIB3000MC=m - -# -# DVB-C (cable) frontends -# -CONFIG_DVB_ATMEL_AT76C651=m -CONFIG_DVB_VES1820=m -CONFIG_DVB_TDA10021=m -CONFIG_DVB_STV0297=m - -# -# ATSC (North American/Korean Terresterial DTV) frontends -# -CONFIG_DVB_NXT2002=m -CONFIG_DVB_OR51211=m -CONFIG_DVB_OR51132=m -CONFIG_VIDEO_SAA7146=m -CONFIG_VIDEO_SAA7146_VV=m -CONFIG_VIDEO_VIDEOBUF=m -CONFIG_VIDEO_TUNER=m -CONFIG_VIDEO_BUF=m -CONFIG_VIDEO_BTCX=m -CONFIG_VIDEO_IR=m -CONFIG_VIDEO_TVEEPROM=m - -# -# Graphics support -# -CONFIG_FB=y -CONFIG_FB_CFB_FILLRECT=y -CONFIG_FB_CFB_COPYAREA=y -CONFIG_FB_CFB_IMAGEBLIT=y -CONFIG_FB_SOFT_CURSOR=y -# CONFIG_FB_MACMODES is not set -# CONFIG_FB_MODE_HELPERS is not set -CONFIG_FB_TILEBLITTING=y -# CONFIG_FB_CIRRUS is not set -# CONFIG_FB_PM2 is not set -# CONFIG_FB_CYBER2000 is not set -# CONFIG_FB_CT65550 is not set -# CONFIG_FB_ASILIANT is not set -# CONFIG_FB_IMSTT is not set -# CONFIG_FB_VGA16 is not set -# CONFIG_FB_NVIDIA is not set -# CONFIG_FB_RIVA is not set -CONFIG_FB_MATROX=y -CONFIG_FB_MATROX_MILLENIUM=y -CONFIG_FB_MATROX_MYSTIQUE=y -CONFIG_FB_MATROX_G=y -# CONFIG_FB_MATROX_I2C is not set -# CONFIG_FB_MATROX_MULTIHEAD is not set -# CONFIG_FB_RADEON_OLD is not set -# CONFIG_FB_RADEON is not set -# CONFIG_FB_ATY128 is not set -# CONFIG_FB_ATY is not set -# CONFIG_FB_SAVAGE is not set -# CONFIG_FB_SIS is not set -# CONFIG_FB_NEOMAGIC is not set -# CONFIG_FB_KYRO is not set -# CONFIG_FB_3DFX is not set -# CONFIG_FB_VOODOO1 is not set -# CONFIG_FB_TRIDENT is not set -# CONFIG_FB_S1D13XXX is not set -# CONFIG_FB_VIRTUAL is not set - -# -# Console display driver support -# -CONFIG_DUMMY_CONSOLE=y -CONFIG_FRAMEBUFFER_CONSOLE=y -# CONFIG_FONTS is not set -CONFIG_FONT_8x8=y -CONFIG_FONT_8x16=y - -# -# Logo configuration -# -CONFIG_LOGO=y -CONFIG_LOGO_LINUX_MONO=y -CONFIG_LOGO_LINUX_VGA16=y -CONFIG_LOGO_LINUX_CLUT224=y -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -CONFIG_USB=y -# CONFIG_USB_DEBUG is not set - -# -# Miscellaneous USB options -# -CONFIG_USB_DEVICEFS=y -# CONFIG_USB_BANDWIDTH is not set -# CONFIG_USB_DYNAMIC_MINORS is not set -# CONFIG_USB_OTG is not set - -# -# USB Host Controller Drivers -# -CONFIG_USB_EHCI_HCD=y -# CONFIG_USB_EHCI_SPLIT_ISO is not set -# CONFIG_USB_EHCI_ROOT_HUB_TT is not set -CONFIG_USB_OHCI_HCD=y -# CONFIG_USB_OHCI_BIG_ENDIAN is not set -CONFIG_USB_OHCI_LITTLE_ENDIAN=y -CONFIG_USB_UHCI_HCD=y -CONFIG_USB_SL811_HCD=m -# CONFIG_USB_SL811_CS is not set - -# -# USB Device Class drivers -# -CONFIG_USB_BLUETOOTH_TTY=m -CONFIG_USB_ACM=m -CONFIG_USB_PRINTER=y - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information -# -CONFIG_USB_STORAGE=y -# CONFIG_USB_STORAGE_DEBUG is not set -CONFIG_USB_STORAGE_DATAFAB=y -CONFIG_USB_STORAGE_FREECOM=y -CONFIG_USB_STORAGE_ISD200=y -CONFIG_USB_STORAGE_DPCM=y -CONFIG_USB_STORAGE_USBAT=y -CONFIG_USB_STORAGE_SDDR09=y -CONFIG_USB_STORAGE_SDDR55=y -CONFIG_USB_STORAGE_JUMPSHOT=y - -# -# USB Input Devices -# -CONFIG_USB_HID=y -CONFIG_USB_HIDINPUT=y -# CONFIG_HID_FF is not set -CONFIG_USB_HIDDEV=y -CONFIG_USB_AIPTEK=m -CONFIG_USB_WACOM=m -CONFIG_USB_KBTAB=m -CONFIG_USB_POWERMATE=m -# CONFIG_USB_MTOUCH is not set -CONFIG_USB_EGALAX=m -CONFIG_USB_XPAD=m -CONFIG_USB_ATI_REMOTE=m - -# -# USB Imaging devices -# -CONFIG_USB_MDC800=m -CONFIG_USB_MICROTEK=m - -# -# USB Multimedia devices -# -CONFIG_USB_DABUSB=m -CONFIG_USB_VICAM=m -CONFIG_USB_DSBR=m -CONFIG_USB_IBMCAM=m -CONFIG_USB_KONICAWC=m -CONFIG_USB_OV511=m -CONFIG_USB_SE401=m -CONFIG_USB_SN9C102=m -CONFIG_USB_STV680=m -CONFIG_USB_W9968CF=m -CONFIG_USB_PWC=m - -# -# USB Network Adapters -# -# CONFIG_USB_CATC is not set -# CONFIG_USB_KAWETH is not set -CONFIG_USB_PEGASUS=y -# CONFIG_USB_RTL8150 is not set -CONFIG_USB_USBNET=y - -# -# USB Host-to-Host Cables -# -CONFIG_USB_ALI_M5632=y -CONFIG_USB_AN2720=y -CONFIG_USB_BELKIN=y -CONFIG_USB_GENESYS=y -CONFIG_USB_NET1080=y -CONFIG_USB_PL2301=y -CONFIG_USB_KC2190=y - -# -# Intelligent USB Devices/Gadgets -# -CONFIG_USB_ARMLINUX=y -CONFIG_USB_EPSON2888=y -CONFIG_USB_ZAURUS=y -CONFIG_USB_CDCETHER=y - -# -# USB Network Adapters -# -CONFIG_USB_AX8817X=y -# CONFIG_USB_ZD1201 is not set -CONFIG_USB_MON=y - -# -# USB port drivers -# -CONFIG_USB_USS720=m - -# -# USB Serial Converter support -# -CONFIG_USB_SERIAL=m -CONFIG_USB_SERIAL_GENERIC=y -CONFIG_USB_SERIAL_AIRPRIME=m -CONFIG_USB_SERIAL_BELKIN=m -CONFIG_USB_SERIAL_WHITEHEAT=m -CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m -CONFIG_USB_SERIAL_CP2101=m -CONFIG_USB_SERIAL_CYPRESS_M8=m -CONFIG_USB_SERIAL_EMPEG=m -CONFIG_USB_SERIAL_FTDI_SIO=m -CONFIG_USB_SERIAL_VISOR=m -CONFIG_USB_SERIAL_IPAQ=m -CONFIG_USB_SERIAL_IR=m -CONFIG_USB_SERIAL_EDGEPORT=m -CONFIG_USB_SERIAL_EDGEPORT_TI=m -CONFIG_USB_SERIAL_GARMIN=m -CONFIG_USB_SERIAL_IPW=m -CONFIG_USB_SERIAL_KEYSPAN_PDA=m -CONFIG_USB_SERIAL_KEYSPAN=m -CONFIG_USB_SERIAL_KEYSPAN_MPR=y -CONFIG_USB_SERIAL_KEYSPAN_USA28=y -CONFIG_USB_SERIAL_KEYSPAN_USA28X=y -CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y -CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y -CONFIG_USB_SERIAL_KEYSPAN_USA19=y -CONFIG_USB_SERIAL_KEYSPAN_USA18X=y -CONFIG_USB_SERIAL_KEYSPAN_USA19W=y -CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y -CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y -CONFIG_USB_SERIAL_KEYSPAN_USA49W=y -CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y -CONFIG_USB_SERIAL_KLSI=m -CONFIG_USB_SERIAL_KOBIL_SCT=m -CONFIG_USB_SERIAL_MCT_U232=m -CONFIG_USB_SERIAL_PL2303=m -CONFIG_USB_SERIAL_HP4X=m -CONFIG_USB_SERIAL_SAFE=m -# CONFIG_USB_SERIAL_SAFE_PADDED is not set -CONFIG_USB_SERIAL_TI=m -CONFIG_USB_SERIAL_CYBERJACK=m -CONFIG_USB_SERIAL_XIRCOM=m -CONFIG_USB_SERIAL_OPTION=m -CONFIG_USB_SERIAL_OMNINET=m -CONFIG_USB_EZUSB=y - -# -# USB Miscellaneous drivers -# -CONFIG_USB_EMI62=m -CONFIG_USB_EMI26=m -CONFIG_USB_AUERSWALD=m -CONFIG_USB_RIO500=m -CONFIG_USB_LEGOTOWER=m -CONFIG_USB_LCD=m -CONFIG_USB_LED=m -CONFIG_USB_CYTHERM=m -CONFIG_USB_PHIDGETKIT=m -CONFIG_USB_PHIDGETSERVO=m -CONFIG_USB_IDMOUSE=m -CONFIG_USB_SISUSBVGA=m -# CONFIG_USB_TEST is not set - -# -# USB ATM/DSL drivers -# -CONFIG_USB_ATM=m -# CONFIG_USB_SPEEDTOUCH is not set - -# -# USB Gadget Support -# -CONFIG_USB_GADGET=m -# CONFIG_USB_GADGET_DEBUG_FILES is not set -CONFIG_USB_GADGET_NET2280=y -CONFIG_USB_NET2280=m -# CONFIG_USB_GADGET_PXA2XX is not set -# CONFIG_USB_GADGET_GOKU is not set -# CONFIG_USB_GADGET_LH7A40X is not set -# CONFIG_USB_GADGET_OMAP is not set -# CONFIG_USB_GADGET_DUMMY_HCD is not set -CONFIG_USB_GADGET_DUALSPEED=y -CONFIG_USB_ZERO=m -CONFIG_USB_ETH=m -CONFIG_USB_ETH_RNDIS=y -CONFIG_USB_GADGETFS=m -CONFIG_USB_FILE_STORAGE=m -# CONFIG_USB_FILE_STORAGE_TEST is not set -CONFIG_USB_G_SERIAL=m - -# -# MMC/SD Card support -# -# CONFIG_MMC is not set - -# -# InfiniBand support -# -# CONFIG_INFINIBAND is not set - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -CONFIG_EXT3_FS=y -# CONFIG_EXT3_FS_XATTR is not set -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_REISERFS_FS=m -# CONFIG_REISERFS_CHECK is not set -# CONFIG_REISERFS_PROC_INFO is not set -# CONFIG_REISERFS_FS_XATTR is not set -CONFIG_JFS_FS=m -# CONFIG_JFS_POSIX_ACL is not set -# CONFIG_JFS_SECURITY is not set -# CONFIG_JFS_DEBUG is not set -# CONFIG_JFS_STATISTICS is not set - -# -# XFS support -# -# CONFIG_XFS_FS is not set -CONFIG_MINIX_FS=m -CONFIG_ROMFS_FS=m -CONFIG_QUOTA=y -CONFIG_QFMT_V1=m -CONFIG_QFMT_V2=m -CONFIG_QUOTACTL=y -CONFIG_DNOTIFY=y -CONFIG_AUTOFS_FS=m -CONFIG_AUTOFS4_FS=m - -# -# CD-ROM/DVD Filesystems -# -CONFIG_ISO9660_FS=y -CONFIG_JOLIET=y -CONFIG_ZISOFS=y -CONFIG_ZISOFS_FS=y -CONFIG_UDF_FS=y -CONFIG_UDF_NLS=y - -# -# DOS/FAT/NT Filesystems -# -CONFIG_FAT_FS=m -CONFIG_MSDOS_FS=m -CONFIG_VFAT_FS=m -CONFIG_FAT_DEFAULT_CODEPAGE=437 -CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -CONFIG_NTFS_FS=m -# CONFIG_NTFS_DEBUG is not set -CONFIG_NTFS_RW=y - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -CONFIG_SYSFS=y -CONFIG_DEVFS_FS=y -# CONFIG_DEVFS_MOUNT is not set -# CONFIG_DEVFS_DEBUG is not set -# CONFIG_DEVPTS_FS_XATTR is not set -CONFIG_TMPFS=y -# CONFIG_TMPFS_XATTR is not set -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y - -# -# Miscellaneous filesystems -# -CONFIG_ADFS_FS=m -# CONFIG_ADFS_FS_RW is not set -CONFIG_AFFS_FS=m -CONFIG_HFS_FS=m -CONFIG_HFSPLUS_FS=m -CONFIG_BEFS_FS=m -# CONFIG_BEFS_DEBUG is not set -CONFIG_BFS_FS=m -CONFIG_EFS_FS=m -CONFIG_JFFS_FS=m -CONFIG_JFFS_FS_VERBOSE=0 -# CONFIG_JFFS_PROC_FS is not set -CONFIG_JFFS2_FS=m -CONFIG_JFFS2_FS_DEBUG=0 -# CONFIG_JFFS2_FS_NAND is not set -# CONFIG_JFFS2_FS_NOR_ECC is not set -# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set -CONFIG_JFFS2_ZLIB=y -CONFIG_JFFS2_RTIME=y -# CONFIG_JFFS2_RUBIN is not set -CONFIG_CRAMFS=y -CONFIG_VXFS_FS=m -CONFIG_HPFS_FS=m -CONFIG_QNX4FS_FS=m -CONFIG_SYSV_FS=m -CONFIG_UFS_FS=m -# CONFIG_UFS_FS_WRITE is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -# CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -CONFIG_NFSD=m -# CONFIG_NFSD_V3 is not set -CONFIG_NFSD_TCP=y -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_EXPORTFS=m -CONFIG_SUNRPC=y -CONFIG_SUNRPC_GSS=m -CONFIG_RPCSEC_GSS_KRB5=m -CONFIG_RPCSEC_GSS_SPKM3=m -CONFIG_SMB_FS=m -# CONFIG_SMB_NLS_DEFAULT is not set -CONFIG_CIFS=m -# CONFIG_CIFS_STATS is not set -# CONFIG_CIFS_XATTR is not set -# CONFIG_CIFS_EXPERIMENTAL is not set -CONFIG_NCP_FS=m -# CONFIG_NCPFS_PACKET_SIGNING is not set -# CONFIG_NCPFS_IOCTL_LOCKING is not set -# CONFIG_NCPFS_STRONG is not set -# CONFIG_NCPFS_NFS_NS is not set -# CONFIG_NCPFS_OS2_NS is not set -# CONFIG_NCPFS_SMALLDOS is not set -# CONFIG_NCPFS_NLS is not set -# CONFIG_NCPFS_EXTRAS is not set -CONFIG_CODA_FS=m -# CONFIG_CODA_FS_OLD_API is not set -CONFIG_AFS_FS=m -CONFIG_RXRPC=m - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -CONFIG_MAC_PARTITION=y -CONFIG_MSDOS_PARTITION=y -# CONFIG_BSD_DISKLABEL is not set -# CONFIG_MINIX_SUBPARTITION is not set -# CONFIG_SOLARIS_X86_PARTITION is not set -# CONFIG_UNIXWARE_DISKLABEL is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_EFI_PARTITION is not set - -# -# Native Language Support -# -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="iso8859-1" -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_CODEPAGE_737=m -CONFIG_NLS_CODEPAGE_775=m -CONFIG_NLS_CODEPAGE_850=m -CONFIG_NLS_CODEPAGE_852=m -CONFIG_NLS_CODEPAGE_855=m -CONFIG_NLS_CODEPAGE_857=m -CONFIG_NLS_CODEPAGE_860=m -CONFIG_NLS_CODEPAGE_861=m -CONFIG_NLS_CODEPAGE_862=m -CONFIG_NLS_CODEPAGE_863=m -CONFIG_NLS_CODEPAGE_864=m -CONFIG_NLS_CODEPAGE_865=m -CONFIG_NLS_CODEPAGE_866=m -CONFIG_NLS_CODEPAGE_869=m -CONFIG_NLS_CODEPAGE_936=m -CONFIG_NLS_CODEPAGE_950=m -CONFIG_NLS_CODEPAGE_932=m -CONFIG_NLS_CODEPAGE_949=m -CONFIG_NLS_CODEPAGE_874=m -CONFIG_NLS_ISO8859_8=m -CONFIG_NLS_CODEPAGE_1250=m -CONFIG_NLS_CODEPAGE_1251=m -CONFIG_NLS_ASCII=m -CONFIG_NLS_ISO8859_1=y -CONFIG_NLS_ISO8859_2=m -CONFIG_NLS_ISO8859_3=m -CONFIG_NLS_ISO8859_4=m -CONFIG_NLS_ISO8859_5=m -CONFIG_NLS_ISO8859_6=m -CONFIG_NLS_ISO8859_7=m -CONFIG_NLS_ISO8859_9=m -CONFIG_NLS_ISO8859_13=m -CONFIG_NLS_ISO8859_14=m -CONFIG_NLS_ISO8859_15=m -CONFIG_NLS_KOI8_R=m -CONFIG_NLS_KOI8_U=m -CONFIG_NLS_UTF8=m - -# -# IBM 40x options -# - -# -# Library routines -# -CONFIG_CRC_CCITT=m -CONFIG_CRC32=y -# CONFIG_LIBCRC32C is not set -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=m -CONFIG_REED_SOLOMON=m -CONFIG_REED_SOLOMON_DEC16=y - -# -# Profiling support -# -# CONFIG_PROFILING is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -# CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_SERIAL_TEXT_DEBUG is not set -CONFIG_PPC_OCP=y - -# -# Security options -# -# CONFIG_KEYS is not set -CONFIG_SECURITY=y -CONFIG_SECURITY_NETWORK=y -CONFIG_SECURITY_CAPABILITIES=m -CONFIG_SECURITY_ROOTPLUG=m -CONFIG_SECURITY_SECLVL=m -# CONFIG_SECURITY_SELINUX is not set - -# -# Cryptographic options -# -CONFIG_CRYPTO=y -CONFIG_CRYPTO_HMAC=y -# CONFIG_CRYPTO_NULL is not set -# CONFIG_CRYPTO_MD4 is not set -CONFIG_CRYPTO_MD5=m -CONFIG_CRYPTO_SHA1=m -# CONFIG_CRYPTO_SHA256 is not set -# CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set -# CONFIG_CRYPTO_TGR192 is not set -CONFIG_CRYPTO_DES=m -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set -# CONFIG_CRYPTO_AES is not set -# CONFIG_CRYPTO_CAST5 is not set -# CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -CONFIG_CRYPTO_ARC4=m -# CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -CONFIG_CRYPTO_DEFLATE=m -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_TEST is not set - -# -# Hardware crypto devices -# diff --git a/packages/linux/linux-dht-walnut-2.6.12.6/iw_we18-5.diff b/packages/linux/linux-dht-walnut-2.6.12.6/iw_we18-5.diff deleted file mode 100644 index 85fcdd1224..0000000000 --- a/packages/linux/linux-dht-walnut-2.6.12.6/iw_we18-5.diff +++ /dev/null @@ -1,462 +0,0 @@ -diff -upr linux-2.6.11/include/linux/wireless.h linux-2.6.11-WE18/include/linux/wireless.h ---- linux-2.6.11/include/linux/wireless.h 2004-12-24 13:35:01.000000000 -0800 -+++ linux-2.6.11-WE18/include/linux/wireless.h 2005-03-12 09:53:02.000000000 -0800 -@@ -1,10 +1,10 @@ - /* - * This file define a set of standard wireless extensions - * -- * Version : 17 21.6.04 -+ * Version : 18 12.3.05 - * - * Authors : Jean Tourrilhes - HPL - <jt@hpl.hp.com> -- * Copyright (c) 1997-2004 Jean Tourrilhes, All Rights Reserved. -+ * Copyright (c) 1997-2005 Jean Tourrilhes, All Rights Reserved. - */ - - #ifndef _LINUX_WIRELESS_H -@@ -82,7 +82,7 @@ - * (there is some stuff that will be added in the future...) - * I just plan to increment with each new version. - */ --#define WIRELESS_EXT 17 -+#define WIRELESS_EXT 18 - - /* - * Changes : -@@ -182,6 +182,21 @@ - * - Document (struct iw_quality *)->updated, add new flags (INVALID) - * - Wireless Event capability in struct iw_range - * - Add support for relative TxPower (yick !) -+ * -+ * V17 to V18 (From Jouni Malinen <jkmaline@cc.hut.fi>) -+ * ---------- -+ * - Add support for WPA/WPA2 -+ * - Add extended encoding configuration (SIOCSIWENCODEEXT and -+ * SIOCGIWENCODEEXT) -+ * - Add SIOCSIWGENIE/SIOCGIWGENIE -+ * - Add SIOCSIWMLME -+ * - Add SIOCSIWPMKSA -+ * - Add struct iw_range bit field for supported encoding capabilities -+ * - Add optional scan request parameters for SIOCSIWSCAN -+ * - Add SIOCSIWAUTH/SIOCGIWAUTH for setting authentication and WPA -+ * related parameters (extensible up to 4096 parameter values) -+ * - Add wireless events: IWEVGENIE, IWEVMICHAELMICFAILURE, -+ * IWEVASSOCREQIE, IWEVASSOCRESPIE, IWEVPMKIDCAND - */ - - /**************************** CONSTANTS ****************************/ -@@ -256,6 +271,30 @@ - #define SIOCSIWPOWER 0x8B2C /* set Power Management settings */ - #define SIOCGIWPOWER 0x8B2D /* get Power Management settings */ - -+/* WPA : Generic IEEE 802.11 informatiom element (e.g., for WPA/RSN/WMM). -+ * This ioctl uses struct iw_point and data buffer that includes IE id and len -+ * fields. More than one IE may be included in the request. Setting the generic -+ * IE to empty buffer (len=0) removes the generic IE from the driver. Drivers -+ * are allowed to generate their own WPA/RSN IEs, but in these cases, drivers -+ * are required to report the used IE as a wireless event, e.g., when -+ * associating with an AP. */ -+#define SIOCSIWGENIE 0x8B30 /* set generic IE */ -+#define SIOCGIWGENIE 0x8B31 /* get generic IE */ -+ -+/* WPA : IEEE 802.11 MLME requests */ -+#define SIOCSIWMLME 0x8B16 /* request MLME operation; uses -+ * struct iw_mlme */ -+/* WPA : Authentication mode parameters */ -+#define SIOCSIWAUTH 0x8B32 /* set authentication mode params */ -+#define SIOCGIWAUTH 0x8B33 /* get authentication mode params */ -+ -+/* WPA : Extended version of encoding configuration */ -+#define SIOCSIWENCODEEXT 0x8B34 /* set encoding token & mode */ -+#define SIOCGIWENCODEEXT 0x8B35 /* get encoding token & mode */ -+ -+/* WPA2 : PMKSA cache management */ -+#define SIOCSIWPMKSA 0x8B36 /* PMKSA cache operation */ -+ - /* -------------------- DEV PRIVATE IOCTL LIST -------------------- */ - - /* These 32 ioctl are wireless device private, for 16 commands. -@@ -297,6 +336,34 @@ - #define IWEVCUSTOM 0x8C02 /* Driver specific ascii string */ - #define IWEVREGISTERED 0x8C03 /* Discovered a new node (AP mode) */ - #define IWEVEXPIRED 0x8C04 /* Expired a node (AP mode) */ -+#define IWEVGENIE 0x8C05 /* Generic IE (WPA, RSN, WMM, ..) -+ * (scan results); This includes id and -+ * length fields. One IWEVGENIE may -+ * contain more than one IE. Scan -+ * results may contain one or more -+ * IWEVGENIE events. */ -+#define IWEVMICHAELMICFAILURE 0x8C06 /* Michael MIC failure -+ * (struct iw_michaelmicfailure) -+ */ -+#define IWEVASSOCREQIE 0x8C07 /* IEs used in (Re)Association Request. -+ * The data includes id and length -+ * fields and may contain more than one -+ * IE. This event is required in -+ * Managed mode if the driver -+ * generates its own WPA/RSN IE. This -+ * should be sent just before -+ * IWEVREGISTERED event for the -+ * association. */ -+#define IWEVASSOCRESPIE 0x8C08 /* IEs used in (Re)Association -+ * Response. The data includes id and -+ * length fields and may contain more -+ * than one IE. This may be sent -+ * between IWEVASSOCREQIE and -+ * IWEVREGISTERED events for the -+ * association. */ -+#define IWEVPMKIDCAND 0x8C09 /* PMKID candidate for RSN -+ * pre-authentication -+ * (struct iw_pmkid_cand) */ - - #define IWEVFIRST 0x8C00 - -@@ -432,12 +499,94 @@ - #define IW_SCAN_THIS_MODE 0x0020 /* Scan only this Mode */ - #define IW_SCAN_ALL_RATE 0x0040 /* Scan all Bit-Rates */ - #define IW_SCAN_THIS_RATE 0x0080 /* Scan only this Bit-Rate */ -+/* struct iw_scan_req scan_type */ -+#define IW_SCAN_TYPE_ACTIVE 0 -+#define IW_SCAN_TYPE_PASSIVE 1 - /* Maximum size of returned data */ - #define IW_SCAN_MAX_DATA 4096 /* In bytes */ - - /* Max number of char in custom event - use multiple of them if needed */ - #define IW_CUSTOM_MAX 256 /* In bytes */ - -+/* Generic information element */ -+#define IW_GENERIC_IE_MAX 1024 -+ -+/* MLME requests (SIOCSIWMLME / struct iw_mlme) */ -+#define IW_MLME_DEAUTH 0 -+#define IW_MLME_DISASSOC 1 -+ -+/* SIOCSIWAUTH/SIOCGIWAUTH struct iw_param flags */ -+#define IW_AUTH_INDEX 0x0FFF -+#define IW_AUTH_FLAGS 0xF000 -+/* SIOCSIWAUTH/SIOCGIWAUTH parameters (0 .. 4095) -+ * (IW_AUTH_INDEX mask in struct iw_param flags; this is the index of the -+ * parameter that is being set/get to; value will be read/written to -+ * struct iw_param value field) */ -+#define IW_AUTH_WPA_VERSION 0 -+#define IW_AUTH_CIPHER_PAIRWISE 1 -+#define IW_AUTH_CIPHER_GROUP 2 -+#define IW_AUTH_KEY_MGMT 3 -+#define IW_AUTH_TKIP_COUNTERMEASURES 4 -+#define IW_AUTH_DROP_UNENCRYPTED 5 -+#define IW_AUTH_80211_AUTH_ALG 6 -+#define IW_AUTH_WPA_ENABLED 7 -+#define IW_AUTH_RX_UNENCRYPTED_EAPOL 8 -+#define IW_AUTH_ROAMING_CONTROL 9 -+#define IW_AUTH_PRIVACY_INVOKED 10 -+ -+/* IW_AUTH_WPA_VERSION values (bit field) */ -+#define IW_AUTH_WPA_VERSION_DISABLED 0x00000001 -+#define IW_AUTH_WPA_VERSION_WPA 0x00000002 -+#define IW_AUTH_WPA_VERSION_WPA2 0x00000004 -+ -+/* IW_AUTH_PAIRWISE_CIPHER and IW_AUTH_GROUP_CIPHER values (bit field) */ -+#define IW_AUTH_CIPHER_NONE 0x00000001 -+#define IW_AUTH_CIPHER_WEP40 0x00000002 -+#define IW_AUTH_CIPHER_TKIP 0x00000004 -+#define IW_AUTH_CIPHER_CCMP 0x00000008 -+#define IW_AUTH_CIPHER_WEP104 0x00000010 -+ -+/* IW_AUTH_KEY_MGMT values (bit field) */ -+#define IW_AUTH_KEY_MGMT_802_1X 1 -+#define IW_AUTH_KEY_MGMT_PSK 2 -+ -+/* IW_AUTH_80211_AUTH_ALG values (bit field) */ -+#define IW_AUTH_ALG_OPEN_SYSTEM 0x00000001 -+#define IW_AUTH_ALG_SHARED_KEY 0x00000002 -+#define IW_AUTH_ALG_LEAP 0x00000004 -+ -+/* IW_AUTH_ROAMING_CONTROL values */ -+#define IW_AUTH_ROAMING_ENABLE 0 /* driver/firmware based roaming */ -+#define IW_AUTH_ROAMING_DISABLE 1 /* user space program used for roaming -+ * control */ -+ -+/* SIOCSIWENCODEEXT definitions */ -+#define IW_ENCODE_SEQ_MAX_SIZE 8 -+/* struct iw_encode_ext ->alg */ -+#define IW_ENCODE_ALG_NONE 0 -+#define IW_ENCODE_ALG_WEP 1 -+#define IW_ENCODE_ALG_TKIP 2 -+#define IW_ENCODE_ALG_CCMP 3 -+/* struct iw_encode_ext ->ext_flags */ -+#define IW_ENCODE_EXT_TX_SEQ_VALID 0x00000001 -+#define IW_ENCODE_EXT_RX_SEQ_VALID 0x00000002 -+#define IW_ENCODE_EXT_GROUP_KEY 0x00000004 -+#define IW_ENCODE_EXT_SET_TX_KEY 0x00000008 -+ -+/* IWEVMICHAELMICFAILURE : struct iw_michaelmicfailure ->flags */ -+#define IW_MICFAILURE_KEY_ID 0x00000003 /* Key ID 0..3 */ -+#define IW_MICFAILURE_GROUP 0x00000004 -+#define IW_MICFAILURE_PAIRWISE 0x00000008 -+#define IW_MICFAILURE_STAKEY 0x00000010 -+#define IW_MICFAILURE_COUNT 0x00000060 /* 1 or 2 (0 = count not supported) -+ */ -+ -+/* Bit field values for enc_capa in struct iw_range */ -+#define IW_ENC_CAPA_WPA 0x00000001 -+#define IW_ENC_CAPA_WPA2 0x00000002 -+#define IW_ENC_CAPA_CIPHER_TKIP 0x00000004 -+#define IW_ENC_CAPA_CIPHER_CCMP 0x00000008 -+ - /* Event capability macros - in (struct iw_range *)->event_capa - * Because we have more than 32 possible events, we use an array of - * 32 bit bitmasks. Note : 32 bits = 0x20 = 2^5. */ -@@ -546,6 +695,132 @@ struct iw_thrspy - struct iw_quality high; /* High threshold */ - }; - -+/* -+ * Optional data for scan request -+ * -+ * Note: these optional parameters are controlling parameters for the -+ * scanning behavior, these do not apply to getting scan results -+ * (SIOCGIWSCAN). Drivers are expected to keep a local BSS table and -+ * provide a merged results with all BSSes even if the previous scan -+ * request limited scanning to a subset, e.g., by specifying an SSID. -+ * Especially, scan results are required to include an entry for the -+ * current BSS if the driver is in Managed mode and associated with an AP. -+ */ -+struct iw_scan_req -+{ -+ __u8 scan_type; /* IW_SCAN_TYPE_{ACTIVE,PASSIVE} */ -+ __u8 essid_len; -+ __u8 num_channels; /* num entries in channel_list; -+ * 0 = scan all allowed channels */ -+ __u8 flags; /* reserved as padding; use zero, this may -+ * be used in the future for adding flags -+ * to request different scan behavior */ -+ struct sockaddr bssid; /* ff:ff:ff:ff:ff:ff for broadcast BSSID or -+ * individual address of a specific BSS */ -+ -+ /* -+ * Use this ESSID if IW_SCAN_THIS_ESSID flag is used instead of using -+ * the current ESSID. This allows scan requests for specific ESSID -+ * without having to change the current ESSID and potentially breaking -+ * the current association. -+ */ -+ __u8 essid[IW_ESSID_MAX_SIZE]; -+ -+ /* -+ * Optional parameters for changing the default scanning behavior. -+ * These are based on the MLME-SCAN.request from IEEE Std 802.11. -+ * TU is 1.024 ms. If these are set to 0, driver is expected to use -+ * reasonable default values. min_channel_time defines the time that -+ * will be used to wait for the first reply on each channel. If no -+ * replies are received, next channel will be scanned after this. If -+ * replies are received, total time waited on the channel is defined by -+ * max_channel_time. -+ */ -+ __u32 min_channel_time; /* in TU */ -+ __u32 max_channel_time; /* in TU */ -+ -+ struct iw_freq channel_list[IW_MAX_FREQUENCIES]; -+}; -+ -+/* ------------------------- WPA SUPPORT ------------------------- */ -+ -+/* -+ * Extended data structure for get/set encoding (this is used with -+ * SIOCSIWENCODEEXT/SIOCGIWENCODEEXT. struct iw_point and IW_ENCODE_* -+ * flags are used in the same way as with SIOCSIWENCODE/SIOCGIWENCODE and -+ * only the data contents changes (key data -> this structure, including -+ * key data). -+ * -+ * If the new key is the first group key, it will be set as the default -+ * TX key. Otherwise, default TX key index is only changed if -+ * IW_ENCODE_EXT_SET_TX_KEY flag is set. -+ * -+ * Key will be changed with SIOCSIWENCODEEXT in all cases except for -+ * special "change TX key index" operation which is indicated by setting -+ * key_len = 0 and ext_flags |= IW_ENCODE_EXT_SET_TX_KEY. -+ * -+ * tx_seq/rx_seq are only used when respective -+ * IW_ENCODE_EXT_{TX,RX}_SEQ_VALID flag is set in ext_flags. Normal -+ * TKIP/CCMP operation is to set RX seq with SIOCSIWENCODEEXT and start -+ * TX seq from zero whenever key is changed. SIOCGIWENCODEEXT is normally -+ * used only by an Authenticator (AP or an IBSS station) to get the -+ * current TX sequence number. Using TX_SEQ_VALID for SIOCSIWENCODEEXT and -+ * RX_SEQ_VALID for SIOCGIWENCODEEXT are optional, but can be useful for -+ * debugging/testing. -+ */ -+struct iw_encode_ext -+{ -+ __u32 ext_flags; /* IW_ENCODE_EXT_* */ -+ __u8 tx_seq[IW_ENCODE_SEQ_MAX_SIZE]; /* LSB first */ -+ __u8 rx_seq[IW_ENCODE_SEQ_MAX_SIZE]; /* LSB first */ -+ struct sockaddr addr; /* ff:ff:ff:ff:ff:ff for broadcast/multicast -+ * (group) keys or unicast address for -+ * individual keys */ -+ __u16 alg; /* IW_ENCODE_ALG_* */ -+ __u16 key_len; -+ __u8 key[0]; -+}; -+ -+/* SIOCSIWMLME data */ -+struct iw_mlme -+{ -+ __u16 cmd; /* IW_MLME_* */ -+ __u16 reason_code; -+ struct sockaddr addr; -+}; -+ -+/* SIOCSIWPMKSA data */ -+#define IW_PMKSA_ADD 1 -+#define IW_PMKSA_REMOVE 2 -+#define IW_PMKSA_FLUSH 3 -+ -+#define IW_PMKID_LEN 16 -+ -+struct iw_pmksa -+{ -+ __u32 cmd; /* IW_PMKSA_* */ -+ struct sockaddr bssid; -+ __u8 pmkid[IW_PMKID_LEN]; -+}; -+ -+/* IWEVMICHAELMICFAILURE data */ -+struct iw_michaelmicfailure -+{ -+ __u32 flags; -+ struct sockaddr src_addr; -+ __u8 tsc[IW_ENCODE_SEQ_MAX_SIZE]; /* LSB first */ -+}; -+ -+/* IWEVPMKIDCAND data */ -+#define IW_PMKID_CAND_PREAUTH 0x00000001 /* RNS pre-authentication enabled */ -+struct iw_pmkid_cand -+{ -+ __u32 flags; /* IW_PMKID_CAND_* */ -+ __u32 index; /* the smaller the index, the higher the -+ * priority */ -+ struct sockaddr bssid; -+}; -+ - /* ------------------------ WIRELESS STATS ------------------------ */ - /* - * Wireless statistics (used for /proc/net/wireless) -@@ -725,6 +1000,8 @@ struct iw_range - struct iw_freq freq[IW_MAX_FREQUENCIES]; /* list */ - /* Note : this frequency list doesn't need to fit channel numbers, - * because each entry contain its channel index */ -+ -+ __u32 enc_capa; /* IW_ENC_CAPA_* bit field */ - }; - - /* -diff -upr linux-2.6.11/net/core/wireless.c linux-2.6.11-WE18/net/core/wireless.c ---- linux-2.6.11/net/core/wireless.c 2005-03-04 15:55:29.000000000 -0800 -+++ linux-2.6.11-WE18/net/core/wireless.c 2005-03-12 09:11:24.000000000 -0800 -@@ -2,7 +2,7 @@ - * This file implement the Wireless Extensions APIs. - * - * Authors : Jean Tourrilhes - HPL - <jt@hpl.hp.com> -- * Copyright (c) 1997-2004 Jean Tourrilhes, All Rights Reserved. -+ * Copyright (c) 1997-2005 Jean Tourrilhes, All Rights Reserved. - * - * (As all part of the Linux kernel, this file is GPL) - */ -@@ -187,6 +187,12 @@ static const struct iw_ioctl_description - .header_type = IW_HEADER_TYPE_ADDR, - .flags = IW_DESCR_FLAG_DUMP, - }, -+ [SIOCSIWMLME - SIOCIWFIRST] = { -+ .header_type = IW_HEADER_TYPE_POINT, -+ .token_size = 1, -+ .min_tokens = sizeof(struct iw_mlme), -+ .max_tokens = sizeof(struct iw_mlme), -+ }, - [SIOCGIWAPLIST - SIOCIWFIRST] = { - .header_type = IW_HEADER_TYPE_POINT, - .token_size = sizeof(struct sockaddr) + -@@ -195,7 +201,10 @@ static const struct iw_ioctl_description - .flags = IW_DESCR_FLAG_NOMAX, - }, - [SIOCSIWSCAN - SIOCIWFIRST] = { -- .header_type = IW_HEADER_TYPE_PARAM, -+ .header_type = IW_HEADER_TYPE_POINT, -+ .token_size = 1, -+ .min_tokens = 0, -+ .max_tokens = sizeof(struct iw_scan_req), - }, - [SIOCGIWSCAN - SIOCIWFIRST] = { - .header_type = IW_HEADER_TYPE_POINT, -@@ -273,6 +282,42 @@ static const struct iw_ioctl_description - [SIOCGIWPOWER - SIOCIWFIRST] = { - .header_type = IW_HEADER_TYPE_PARAM, - }, -+ [SIOCSIWGENIE - SIOCIWFIRST] = { -+ .header_type = IW_HEADER_TYPE_POINT, -+ .token_size = 1, -+ .max_tokens = IW_GENERIC_IE_MAX, -+ }, -+ [SIOCGIWGENIE - SIOCIWFIRST] = { -+ .header_type = IW_HEADER_TYPE_POINT, -+ .token_size = 1, -+ .max_tokens = IW_GENERIC_IE_MAX, -+ }, -+ [SIOCSIWAUTH - SIOCIWFIRST] = { -+ .header_type = IW_HEADER_TYPE_PARAM, -+ }, -+ [SIOCGIWAUTH - SIOCIWFIRST] = { -+ .header_type = IW_HEADER_TYPE_PARAM, -+ }, -+ [SIOCSIWENCODEEXT - SIOCIWFIRST] = { -+ .header_type = IW_HEADER_TYPE_POINT, -+ .token_size = 1, -+ .min_tokens = sizeof(struct iw_encode_ext), -+ .max_tokens = sizeof(struct iw_encode_ext) + -+ IW_ENCODING_TOKEN_MAX, -+ }, -+ [SIOCGIWENCODEEXT - SIOCIWFIRST] = { -+ .header_type = IW_HEADER_TYPE_POINT, -+ .token_size = 1, -+ .min_tokens = sizeof(struct iw_encode_ext), -+ .max_tokens = sizeof(struct iw_encode_ext) + -+ IW_ENCODING_TOKEN_MAX, -+ }, -+ [SIOCSIWPMKSA - SIOCIWFIRST] = { -+ .header_type = IW_HEADER_TYPE_POINT, -+ .token_size = 1, -+ .min_tokens = sizeof(struct iw_pmksa), -+ .max_tokens = sizeof(struct iw_pmksa), -+ }, - }; - static const int standard_ioctl_num = (sizeof(standard_ioctl) / - sizeof(struct iw_ioctl_description)); -@@ -299,6 +344,31 @@ static const struct iw_ioctl_description - [IWEVEXPIRED - IWEVFIRST] = { - .header_type = IW_HEADER_TYPE_ADDR, - }, -+ [IWEVGENIE - IWEVFIRST] = { -+ .header_type = IW_HEADER_TYPE_POINT, -+ .token_size = 1, -+ .max_tokens = IW_GENERIC_IE_MAX, -+ }, -+ [IWEVMICHAELMICFAILURE - IWEVFIRST] = { -+ .header_type = IW_HEADER_TYPE_POINT, -+ .token_size = 1, -+ .max_tokens = sizeof(struct iw_michaelmicfailure), -+ }, -+ [IWEVASSOCREQIE - IWEVFIRST] = { -+ .header_type = IW_HEADER_TYPE_POINT, -+ .token_size = 1, -+ .max_tokens = IW_GENERIC_IE_MAX, -+ }, -+ [IWEVASSOCRESPIE - IWEVFIRST] = { -+ .header_type = IW_HEADER_TYPE_POINT, -+ .token_size = 1, -+ .max_tokens = IW_GENERIC_IE_MAX, -+ }, -+ [IWEVPMKIDCAND - IWEVFIRST] = { -+ .header_type = IW_HEADER_TYPE_POINT, -+ .token_size = 1, -+ .max_tokens = sizeof(struct iw_pmkid_cand), -+ }, - }; - static const int standard_event_num = (sizeof(standard_event) / - sizeof(struct iw_ioctl_description)); diff --git a/packages/linux/linux-dht-walnut-2.6.12.6/linux-2.6.12-mppe-mppc-1.3.patch b/packages/linux/linux-dht-walnut-2.6.12.6/linux-2.6.12-mppe-mppc-1.3.patch deleted file mode 100644 index aa430252c7..0000000000 --- a/packages/linux/linux-dht-walnut-2.6.12.6/linux-2.6.12-mppe-mppc-1.3.patch +++ /dev/null @@ -1,1559 +0,0 @@ -diff -ruN linux-2.6.12.orig/drivers/net/Kconfig linux-2.6.12/drivers/net/Kconfig ---- linux-2.6.12.orig/drivers/net/Kconfig 2005-06-28 19:57:16.000000000 +0200 -+++ linux-2.6.12/drivers/net/Kconfig 2005-06-28 20:07:01.000000000 +0200 -@@ -2417,6 +2417,32 @@ - module; it is called bsd_comp and will show up in the directory - modules once you have said "make modules". If unsure, say N. - -+config PPP_MPPE_MPPC -+ tristate "Microsoft PPP compression/encryption (MPPC/MPPE)" -+ depends on PPP -+ select CRYPTO_SHA1 -+ select CRYPTO_ARC4 -+ ---help--- -+ Support for the Microsoft Point-To-Point Compression (RFC2118) and -+ Microsoft Point-To-Point Encryption (RFC3078). These protocols are -+ supported by Microsoft Windows and wide range of "hardware" access -+ servers. MPPE is common protocol in Virtual Private Networks. According -+ to RFC3078, MPPE supports 40, 56 and 128-bit key lengths. Depending on -+ PPP daemon configuration on both ends of the link, following scenarios -+ are possible: -+ - only compression (MPPC) is used, -+ - only encryption (MPPE) is used, -+ - compression and encryption (MPPC+MPPE) are used. -+ -+ Please note that Hi/Fn (http://www.hifn.com) holds patent on MPPC so -+ you should check if this patent is valid in your country in order to -+ avoid legal problems. -+ -+ For more information please visit http://free.polbox.pl/h/hs001 -+ -+ To compile this driver as a module, choose M here. The module will -+ be called ppp_mppe_mppc.ko. -+ - config PPPOE - tristate "PPP over Ethernet (EXPERIMENTAL)" - depends on EXPERIMENTAL && PPP -diff -ruN linux-2.6.12.orig/drivers/net/Makefile linux-2.6.12/drivers/net/Makefile ---- linux-2.6.12.orig/drivers/net/Makefile 2005-06-28 19:57:16.000000000 +0200 -+++ linux-2.6.12/drivers/net/Makefile 2005-06-28 20:07:01.000000000 +0200 -@@ -105,6 +105,7 @@ - obj-$(CONFIG_PPP_SYNC_TTY) += ppp_synctty.o - obj-$(CONFIG_PPP_DEFLATE) += ppp_deflate.o - obj-$(CONFIG_PPP_BSDCOMP) += bsd_comp.o -+obj-$(CONFIG_PPP_MPPE_MPPC) += ppp_mppe_mppc.o - obj-$(CONFIG_PPPOE) += pppox.o pppoe.o - - obj-$(CONFIG_SLIP) += slip.o -diff -ruN linux-2.6.12.orig/drivers/net/ppp_generic.c linux-2.6.12/drivers/net/ppp_generic.c ---- linux-2.6.12.orig/drivers/net/ppp_generic.c 2005-06-28 19:57:20.000000000 +0200 -+++ linux-2.6.12/drivers/net/ppp_generic.c 2005-06-28 20:07:01.000000000 +0200 -@@ -19,7 +19,7 @@ - * PPP driver, written by Michael Callahan and Al Longyear, and - * subsequently hacked by Paul Mackerras. - * -- * ==FILEVERSION 20041108== -+ * ==FILEVERSION 20050110== - */ - - #include <linux/config.h> -@@ -105,6 +105,7 @@ - spinlock_t rlock; /* lock for receive side 58 */ - spinlock_t wlock; /* lock for transmit side 5c */ - int mru; /* max receive unit 60 */ -+ int mru_alloc; /* MAX(1500,MRU) for dev_alloc_skb() */ - unsigned int flags; /* control bits 64 */ - unsigned int xstate; /* transmit state bits 68 */ - unsigned int rstate; /* receive state bits 6c */ -@@ -632,7 +633,9 @@ - case PPPIOCSMRU: - if (get_user(val, p)) - break; -- ppp->mru = val; -+ ppp->mru_alloc = ppp->mru = val; -+ if (ppp->mru_alloc < PPP_MRU) -+ ppp->mru_alloc = PPP_MRU; /* increase for broken peers */ - err = 0; - break; - -@@ -1107,14 +1110,37 @@ - case PPP_CCP: - /* peek at outbound CCP frames */ - ppp_ccp_peek(ppp, skb, 0); -+ /* -+ * When LZS or MPPE/MPPC has been negotiated we don't send -+ * CCP_RESETACK after receiving CCP_RESETREQ; in fact pppd -+ * sends such a packet but we silently discard it here -+ */ -+ if (CCP_CODE(skb->data+2) == CCP_RESETACK -+ && (ppp->xcomp->compress_proto == CI_MPPE -+ || ppp->xcomp->compress_proto == CI_LZS)) { -+ --ppp->stats.tx_packets; -+ ppp->stats.tx_bytes -= skb->len - 2; -+ kfree_skb(skb); -+ return; -+ } - break; - } - - /* try to do packet compression */ - if ((ppp->xstate & SC_COMP_RUN) && ppp->xc_state != 0 - && proto != PPP_LCP && proto != PPP_CCP) { -- new_skb = alloc_skb(ppp->dev->mtu + ppp->dev->hard_header_len, -- GFP_ATOMIC); -+ int comp_ovhd = 0; -+ /* -+ * because of possible data expansion when MPPC or LZS -+ * is used, allocate compressor's buffer 12.5% bigger -+ * than MTU -+ */ -+ if (ppp->xcomp->compress_proto == CI_MPPE) -+ comp_ovhd = ((ppp->dev->mtu * 9) / 8) + 1 + MPPE_OVHD; -+ else if (ppp->xcomp->compress_proto == CI_LZS) -+ comp_ovhd = ((ppp->dev->mtu * 9) / 8) + 1 + LZS_OVHD; -+ new_skb = alloc_skb(ppp->dev->mtu + ppp->dev->hard_header_len -+ + comp_ovhd, GFP_ATOMIC); - if (new_skb == 0) { - printk(KERN_ERR "PPP: no memory (comp pkt)\n"); - goto drop; -@@ -1132,9 +1158,21 @@ - skb = new_skb; - skb_put(skb, len); - skb_pull(skb, 2); /* pull off A/C bytes */ -- } else { -+ } else if (len == 0) { - /* didn't compress, or CCP not up yet */ - kfree_skb(new_skb); -+ } else { -+ /* -+ * (len < 0) -+ * MPPE requires that we do not send unencrypted -+ * frames. The compressor will return -1 if we -+ * should drop the frame. We cannot simply test -+ * the compress_proto because MPPE and MPPC share -+ * the same number. -+ */ -+ printk(KERN_ERR "ppp: compressor dropped pkt\n"); -+ kfree_skb(new_skb); -+ goto drop; - } - } - -@@ -1640,14 +1678,15 @@ - goto err; - - if (proto == PPP_COMP) { -- ns = dev_alloc_skb(ppp->mru + PPP_HDRLEN); -+ ns = dev_alloc_skb(ppp->mru_alloc + PPP_HDRLEN); - if (ns == 0) { - printk(KERN_ERR "ppp_decompress_frame: no memory\n"); - goto err; - } - /* the decompressor still expects the A/C bytes in the hdr */ - len = ppp->rcomp->decompress(ppp->rc_state, skb->data - 2, -- skb->len + 2, ns->data, ppp->mru + PPP_HDRLEN); -+ skb->len + 2, ns->data, -+ ppp->mru_alloc + PPP_HDRLEN); - if (len < 0) { - /* Pass the compressed frame to pppd as an - error indication. */ -@@ -1673,7 +1712,14 @@ - return skb; - - err: -- ppp->rstate |= SC_DC_ERROR; -+ if (ppp->rcomp->compress_proto != CI_MPPE -+ && ppp->rcomp->compress_proto != CI_LZS) { -+ /* -+ * If decompression protocol isn't MPPE/MPPC or LZS, we set -+ * SC_DC_ERROR flag and wait for CCP_RESETACK -+ */ -+ ppp->rstate |= SC_DC_ERROR; -+ } - ppp_receive_error(ppp); - return skb; - } -@@ -2349,6 +2395,7 @@ - memset(ppp, 0, sizeof(struct ppp)); - - ppp->mru = PPP_MRU; -+ ppp->mru_alloc = PPP_MRU; - init_ppp_file(&ppp->file, INTERFACE); - ppp->file.hdrlen = PPP_HDRLEN - 2; /* don't count proto bytes */ - for (i = 0; i < NUM_NP; ++i) -diff -ruN linux-2.6.12.orig/drivers/net/ppp_mppe_mppc.c linux-2.6.12/drivers/net/ppp_mppe_mppc.c ---- linux-2.6.12.orig/drivers/net/ppp_mppe_mppc.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.12/drivers/net/ppp_mppe_mppc.c 2005-06-28 20:07:01.000000000 +0200 -@@ -0,0 +1,1299 @@ -+/* -+ * ppp_mppe_mppc.c - MPPC/MPPE "compressor/decompressor" module. -+ * -+ * Copyright (c) 1994 Árpád Magosányi <mag@bunuel.tii.matav.hu> -+ * Copyright (c) 1999 Tim Hockin, Cobalt Networks Inc. <thockin@cobaltnet.com> -+ * Copyright (c) 2002-2004 Jan Dubiec <jdx@slackware.pl> -+ * -+ * Permission to use, copy, modify, and distribute this software and its -+ * documentation is hereby granted, provided that the above copyright -+ * notice appears in all copies. This software is provided without any -+ * warranty, express or implied. -+ * -+ * The code is based on MPPE kernel module written by Árpád Magosányi and -+ * Tim Hockin which can be found on http://planetmirror.com/pub/mppe/. -+ * I have added MPPC and 56 bit session keys support in MPPE. -+ * -+ * WARNING! Although this is open source code, its usage in some countries -+ * (in particular in the USA) may violate Stac Inc. patent for MPPC. -+ * -+ * ==FILEVERSION 20041123== -+ * -+ */ -+ -+#include <linux/init.h> -+#include <linux/module.h> -+#include <linux/mm.h> -+#include <linux/slab.h> -+#include <asm/scatterlist.h> -+#include <linux/vmalloc.h> -+#include <linux/crypto.h> -+ -+#include <linux/ppp_defs.h> -+#include <linux/ppp-comp.h> -+ -+/* -+ * State for a mppc/mppe "(de)compressor". -+ */ -+struct ppp_mppe_state { -+ struct crypto_tfm *arc4_tfm; -+ struct crypto_tfm *sha1_tfm; -+ u8 *sha1_digest; -+ u8 master_key[MPPE_MAX_KEY_LEN]; -+ u8 session_key[MPPE_MAX_KEY_LEN]; -+ u8 mppc; /* do we use compression (MPPC)? */ -+ u8 mppe; /* do we use encryption (MPPE)? */ -+ u8 keylen; /* key length in bytes */ -+ u8 bitkeylen; /* key length in bits */ -+ u16 ccount; /* coherency counter */ -+ u16 bits; /* MPPC/MPPE control bits */ -+ u8 stateless; /* do we use stateless mode? */ -+ u8 nextflushed; /* set A bit in the next outgoing packet; -+ used only by compressor*/ -+ u8 flushexpected; /* drop packets until A bit is received; -+ used only by decompressor*/ -+ u8 *hist; /* MPPC history */ -+ u16 *hash; /* Hash table; used only by compressor */ -+ u16 histptr; /* history "cursor" */ -+ int unit; -+ int debug; -+ int mru; -+ struct compstat stats; -+}; -+ -+#define MPPE_HIST_LEN 8192 /* MPPC history size */ -+#define MPPE_MAX_CCOUNT 0x0FFF /* max. coherency counter value */ -+ -+#define MPPE_BIT_FLUSHED 0x80 /* bit A */ -+#define MPPE_BIT_RESET 0x40 /* bit B */ -+#define MPPE_BIT_COMP 0x20 /* bit C */ -+#define MPPE_BIT_ENCRYPTED 0x10 /* bit D */ -+ -+#define MPPE_SALT0 0xD1 /* values used in MPPE key derivation */ -+#define MPPE_SALT1 0x26 /* according to RFC3079 */ -+#define MPPE_SALT2 0x9E -+ -+#define MPPE_CCOUNT(x) ((((x)[4] & 0x0f) << 8) + (x)[5]) -+#define MPPE_BITS(x) ((x)[4] & 0xf0) -+#define MPPE_CTRLHI(x) ((((x)->ccount & 0xf00)>>8)|((x)->bits)) -+#define MPPE_CTRLLO(x) ((x)->ccount & 0xff) -+ -+/* -+ * Kernel Crypto API needs its arguments to be in kmalloc'd memory, not in the -+ * module static data area. That means sha_pad needs to be kmalloc'd. It is done -+ * in mppe_module_init(). This has been pointed out on 30th July 2004 by Oleg -+ * Makarenko on pptpclient-devel mailing list. -+ */ -+#define SHA1_PAD_SIZE 40 -+struct sha_pad { -+ unsigned char sha_pad1[SHA1_PAD_SIZE]; -+ unsigned char sha_pad2[SHA1_PAD_SIZE]; -+}; -+static struct sha_pad *sha_pad; -+ -+static inline void -+setup_sg(struct scatterlist *sg, const void *address, unsigned int length) -+{ -+ sg[0].page = virt_to_page(address); -+ sg[0].offset = offset_in_page(address); -+ sg[0].length = length; -+} -+ -+static inline void -+arc4_setkey(struct ppp_mppe_state *state, const unsigned char *key, -+ const unsigned int keylen) -+{ -+ crypto_cipher_setkey(state->arc4_tfm, key, keylen); -+} -+ -+static inline void -+arc4_encrypt(struct ppp_mppe_state *state, const unsigned char *in, -+ const unsigned int len, unsigned char *out) -+{ -+ struct scatterlist sgin[4], sgout[4]; -+ -+ setup_sg(sgin, in, len); -+ setup_sg(sgout, out, len); -+ crypto_cipher_encrypt(state->arc4_tfm, sgout, sgin, len); -+} -+ -+#define arc4_decrypt arc4_encrypt -+ -+/* -+ * Key Derivation, from RFC 3078, RFC 3079. -+ * Equivalent to Get_Key() for MS-CHAP as described in RFC 3079. -+ */ -+static void -+get_new_key_from_sha(struct ppp_mppe_state *state, unsigned char *interim_key) -+{ -+ struct scatterlist sg[4]; -+ -+ setup_sg(&sg[0], state->master_key, state->keylen); -+ setup_sg(&sg[1], sha_pad->sha_pad1, sizeof(sha_pad->sha_pad1)); -+ setup_sg(&sg[2], state->session_key, state->keylen); -+ setup_sg(&sg[3], sha_pad->sha_pad2, sizeof(sha_pad->sha_pad2)); -+ -+ crypto_digest_digest (state->sha1_tfm, sg, 4, state->sha1_digest); -+ -+ memcpy(interim_key, state->sha1_digest, state->keylen); -+} -+ -+static void -+mppe_change_key(struct ppp_mppe_state *state, int initialize) -+{ -+ unsigned char interim_key[MPPE_MAX_KEY_LEN]; -+ -+ get_new_key_from_sha(state, interim_key); -+ if (initialize) { -+ memcpy(state->session_key, interim_key, state->keylen); -+ } else { -+ arc4_setkey(state, interim_key, state->keylen); -+ arc4_encrypt(state, interim_key, state->keylen, state->session_key); -+ } -+ if (state->keylen == 8) { -+ if (state->bitkeylen == 40) { -+ state->session_key[0] = MPPE_SALT0; -+ state->session_key[1] = MPPE_SALT1; -+ state->session_key[2] = MPPE_SALT2; -+ } else { -+ state->session_key[0] = MPPE_SALT0; -+ } -+ } -+ arc4_setkey(state, state->session_key, state->keylen); -+} -+ -+/* increase 12-bit coherency counter */ -+static inline void -+mppe_increase_ccount(struct ppp_mppe_state *state) -+{ -+ state->ccount = (state->ccount + 1) & MPPE_MAX_CCOUNT; -+ if (state->mppe) { -+ if (state->stateless) { -+ mppe_change_key(state, 0); -+ state->nextflushed = 1; -+ } else { -+ if ((state->ccount & 0xff) == 0xff) { -+ mppe_change_key(state, 0); -+ } -+ } -+ } -+} -+ -+/* allocate space for a MPPE/MPPC (de)compressor. */ -+/* comp != 0 -> init compressor */ -+/* comp = 0 -> init decompressor */ -+static void * -+mppe_alloc(unsigned char *options, int opt_len, int comp) -+{ -+ struct ppp_mppe_state *state; -+ unsigned int digestsize; -+ u8* fname; -+ -+ fname = comp ? "mppe_comp_alloc" : "mppe_decomp_alloc"; -+ -+ /* -+ * Hack warning - additionally to the standard MPPC/MPPE configuration -+ * options, pppd passes to the (de)copressor 8 or 16 byte session key. -+ * Therefore options[1] contains MPPC/MPPE configuration option length -+ * (CILEN_MPPE = 6), but the real options length, depending on the key -+ * length, is 6+8 or 6+16. -+ */ -+ if (opt_len < CILEN_MPPE) { -+ printk(KERN_WARNING "%s: wrong options length: %u\n", fname, opt_len); -+ return NULL; -+ } -+ -+ if (options[0] != CI_MPPE || options[1] != CILEN_MPPE || -+ (options[2] & ~MPPE_STATELESS) != 0 || -+ options[3] != 0 || options[4] != 0 || -+ (options[5] & ~(MPPE_128BIT|MPPE_56BIT|MPPE_40BIT|MPPE_MPPC)) != 0 || -+ (options[5] & (MPPE_128BIT|MPPE_56BIT|MPPE_40BIT|MPPE_MPPC)) == 0) { -+ printk(KERN_WARNING "%s: options rejected: o[0]=%02x, o[1]=%02x, " -+ "o[2]=%02x, o[3]=%02x, o[4]=%02x, o[5]=%02x\n", fname, options[0], -+ options[1], options[2], options[3], options[4], options[5]); -+ return NULL; -+ } -+ -+ state = (struct ppp_mppe_state *)kmalloc(sizeof(*state), GFP_KERNEL); -+ if (state == NULL) { -+ printk(KERN_ERR "%s: cannot allocate space for %scompressor\n", fname, -+ comp ? "" : "de"); -+ return NULL; -+ } -+ memset(state, 0, sizeof(struct ppp_mppe_state)); -+ -+ state->mppc = options[5] & MPPE_MPPC; /* Do we use MPPC? */ -+ state->mppe = options[5] & (MPPE_128BIT | MPPE_56BIT | -+ MPPE_40BIT); /* Do we use MPPE? */ -+ -+ if (state->mppc) { -+ /* allocate MPPC history */ -+ state->hist = (u8*)vmalloc(2*MPPE_HIST_LEN*sizeof(u8)); -+ if (state->hist == NULL) { -+ kfree(state); -+ printk(KERN_ERR "%s: cannot allocate space for MPPC history\n", -+ fname); -+ return NULL; -+ } -+ -+ /* allocate hashtable for MPPC compressor */ -+ if (comp) { -+ state->hash = (u16*)vmalloc(MPPE_HIST_LEN*sizeof(u16)); -+ if (state->hash == NULL) { -+ vfree(state->hist); -+ kfree(state); -+ printk(KERN_ERR "%s: cannot allocate space for MPPC history\n", -+ fname); -+ return NULL; -+ } -+ } -+ } -+ -+ if (state->mppe) { /* specific for MPPE */ -+ /* Load ARC4 algorithm */ -+ state->arc4_tfm = crypto_alloc_tfm("arc4", 0); -+ if (state->arc4_tfm == NULL) { -+ if (state->mppc) { -+ vfree(state->hash); -+ if (comp) -+ vfree(state->hist); -+ } -+ kfree(state); -+ printk(KERN_ERR "%s: cannot load ARC4 module\n", fname); -+ return NULL; -+ } -+ -+ /* Load SHA1 algorithm */ -+ state->sha1_tfm = crypto_alloc_tfm("sha1", 0); -+ if (state->sha1_tfm == NULL) { -+ crypto_free_tfm(state->arc4_tfm); -+ if (state->mppc) { -+ vfree(state->hash); -+ if (comp) -+ vfree(state->hist); -+ } -+ kfree(state); -+ printk(KERN_ERR "%s: cannot load SHA1 module\n", fname); -+ return NULL; -+ } -+ -+ digestsize = crypto_tfm_alg_digestsize(state->sha1_tfm); -+ if (digestsize < MPPE_MAX_KEY_LEN) { -+ crypto_free_tfm(state->sha1_tfm); -+ crypto_free_tfm(state->arc4_tfm); -+ if (state->mppc) { -+ vfree(state->hash); -+ if (comp) -+ vfree(state->hist); -+ } -+ kfree(state); -+ printk(KERN_ERR "%s: CryptoAPI SHA1 digest size too small\n", fname); -+ } -+ -+ state->sha1_digest = kmalloc(digestsize, GFP_KERNEL); -+ if (!state->sha1_digest) { -+ crypto_free_tfm(state->sha1_tfm); -+ crypto_free_tfm(state->arc4_tfm); -+ if (state->mppc) { -+ vfree(state->hash); -+ if (comp) -+ vfree(state->hist); -+ } -+ kfree(state); -+ printk(KERN_ERR "%s: cannot allocate space for SHA1 digest\n", fname); -+ } -+ -+ memcpy(state->master_key, options+CILEN_MPPE, MPPE_MAX_KEY_LEN); -+ memcpy(state->session_key, state->master_key, MPPE_MAX_KEY_LEN); -+ /* initial key generation is done in mppe_init() */ -+ } -+ -+ return (void *) state; -+} -+ -+static void * -+mppe_comp_alloc(unsigned char *options, int opt_len) -+{ -+ return mppe_alloc(options, opt_len, 1); -+} -+ -+static void * -+mppe_decomp_alloc(unsigned char *options, int opt_len) -+{ -+ return mppe_alloc(options, opt_len, 0); -+} -+ -+/* cleanup the (de)compressor */ -+static void -+mppe_comp_free(void *arg) -+{ -+ struct ppp_mppe_state *state = (struct ppp_mppe_state *) arg; -+ -+ if (state != NULL) { -+ if (state->mppe) { -+ if (state->sha1_digest != NULL) -+ kfree(state->sha1_digest); -+ if (state->sha1_tfm != NULL) -+ crypto_free_tfm(state->sha1_tfm); -+ if (state->arc4_tfm != NULL) -+ crypto_free_tfm(state->arc4_tfm); -+ } -+ if (state->hist != NULL) -+ vfree(state->hist); -+ if (state->hash != NULL) -+ vfree(state->hash); -+ kfree(state); -+ } -+} -+ -+/* init MPPC/MPPE (de)compresor */ -+/* comp != 0 -> init compressor */ -+/* comp = 0 -> init decompressor */ -+static int -+mppe_init(void *arg, unsigned char *options, int opt_len, int unit, -+ int hdrlen, int mru, int debug, int comp) -+{ -+ struct ppp_mppe_state *state = (struct ppp_mppe_state *) arg; -+ u8* fname; -+ -+ fname = comp ? "mppe_comp_init" : "mppe_decomp_init"; -+ -+ if (opt_len < CILEN_MPPE) { -+ if (debug) -+ printk(KERN_WARNING "%s: wrong options length: %u\n", -+ fname, opt_len); -+ return 0; -+ } -+ -+ if (options[0] != CI_MPPE || options[1] != CILEN_MPPE || -+ (options[2] & ~MPPE_STATELESS) != 0 || -+ options[3] != 0 || options[4] != 0 || -+ (options[5] & ~(MPPE_56BIT|MPPE_128BIT|MPPE_40BIT|MPPE_MPPC)) != 0 || -+ (options[5] & (MPPE_56BIT|MPPE_128BIT|MPPE_40BIT|MPPE_MPPC)) == 0) { -+ if (debug) -+ printk(KERN_WARNING "%s: options rejected: o[0]=%02x, o[1]=%02x, " -+ "o[2]=%02x, o[3]=%02x, o[4]=%02x, o[5]=%02x\n", fname, -+ options[0], options[1], options[2], options[3], options[4], -+ options[5]); -+ return 0; -+ } -+ -+ if ((options[5] & ~MPPE_MPPC) != MPPE_128BIT && -+ (options[5] & ~MPPE_MPPC) != MPPE_56BIT && -+ (options[5] & ~MPPE_MPPC) != MPPE_40BIT && -+ (options[5] & MPPE_MPPC) != MPPE_MPPC) { -+ if (debug) -+ printk(KERN_WARNING "%s: don't know what to do: o[5]=%02x\n", -+ fname, options[5]); -+ return 0; -+ } -+ -+ state->mppc = options[5] & MPPE_MPPC; /* Do we use MPPC? */ -+ state->mppe = options[5] & (MPPE_128BIT | MPPE_56BIT | -+ MPPE_40BIT); /* Do we use MPPE? */ -+ state->stateless = options[2] & MPPE_STATELESS; /* Do we use stateless mode? */ -+ -+ switch (state->mppe) { -+ case MPPE_40BIT: /* 40 bit key */ -+ state->keylen = 8; -+ state->bitkeylen = 40; -+ break; -+ case MPPE_56BIT: /* 56 bit key */ -+ state->keylen = 8; -+ state->bitkeylen = 56; -+ break; -+ case MPPE_128BIT: /* 128 bit key */ -+ state->keylen = 16; -+ state->bitkeylen = 128; -+ break; -+ default: -+ state->keylen = 0; -+ state->bitkeylen = 0; -+ } -+ -+ state->ccount = MPPE_MAX_CCOUNT; -+ state->bits = 0; -+ state->unit = unit; -+ state->debug = debug; -+ state->histptr = MPPE_HIST_LEN; -+ if (state->mppc) { /* reset history if MPPC was negotiated */ -+ memset(state->hist, 0, 2*MPPE_HIST_LEN*sizeof(u8)); -+ } -+ -+ if (state->mppe) { /* generate initial session keys */ -+ mppe_change_key(state, 1); -+ } -+ -+ if (comp) { /* specific for compressor */ -+ state->nextflushed = 1; -+ } else { /* specific for decompressor */ -+ state->mru = mru; -+ state->flushexpected = 1; -+ } -+ -+ return 1; -+} -+ -+static int -+mppe_comp_init(void *arg, unsigned char *options, int opt_len, int unit, -+ int hdrlen, int debug) -+{ -+ return mppe_init(arg, options, opt_len, unit, hdrlen, 0, debug, 1); -+} -+ -+ -+static int -+mppe_decomp_init(void *arg, unsigned char *options, int opt_len, int unit, -+ int hdrlen, int mru, int debug) -+{ -+ return mppe_init(arg, options, opt_len, unit, hdrlen, mru, debug, 0); -+} -+ -+static void -+mppe_comp_reset(void *arg) -+{ -+ struct ppp_mppe_state *state = (struct ppp_mppe_state *)arg; -+ -+ if (state->debug) -+ printk(KERN_DEBUG "%s%d: resetting MPPC/MPPE compressor\n", -+ __FUNCTION__, state->unit); -+ -+ state->nextflushed = 1; -+ if (state->mppe) -+ arc4_setkey(state, state->session_key, state->keylen); -+} -+ -+static void -+mppe_decomp_reset(void *arg) -+{ -+ /* When MPPC/MPPE is in use, we shouldn't receive any CCP Reset-Ack. -+ But when we receive such a packet, we just ignore it. */ -+ return; -+} -+ -+static void -+mppe_stats(void *arg, struct compstat *stats) -+{ -+ struct ppp_mppe_state *state = (struct ppp_mppe_state *)arg; -+ -+ *stats = state->stats; -+} -+ -+/***************************/ -+/**** Compression stuff ****/ -+/***************************/ -+/* inserts 1 to 8 bits into the output buffer */ -+static inline void putbits8(u8 *buf, u32 val, const u32 n, u32 *i, u32 *l) -+{ -+ buf += *i; -+ if (*l >= n) { -+ *l = (*l) - n; -+ val <<= *l; -+ *buf = *buf | (val & 0xff); -+ if (*l == 0) { -+ *l = 8; -+ (*i)++; -+ *(++buf) = 0; -+ } -+ } else { -+ (*i)++; -+ *l = 8 - n + (*l); -+ val <<= *l; -+ *buf = *buf | ((val >> 8) & 0xff); -+ *(++buf) = val & 0xff; -+ } -+} -+ -+/* inserts 9 to 16 bits into the output buffer */ -+static inline void putbits16(u8 *buf, u32 val, const u32 n, u32 *i, u32 *l) -+{ -+ buf += *i; -+ if (*l >= n - 8) { -+ (*i)++; -+ *l = 8 - n + (*l); -+ val <<= *l; -+ *buf = *buf | ((val >> 8) & 0xff); -+ *(++buf) = val & 0xff; -+ if (*l == 0) { -+ *l = 8; -+ (*i)++; -+ *(++buf) = 0; -+ } -+ } else { -+ (*i)++; (*i)++; -+ *l = 16 - n + (*l); -+ val <<= *l; -+ *buf = *buf | ((val >> 16) & 0xff); -+ *(++buf) = (val >> 8) & 0xff; -+ *(++buf) = val & 0xff; -+ } -+} -+ -+/* inserts 17 to 24 bits into the output buffer */ -+static inline void putbits24(u8 *buf, u32 val, const u32 n, u32 *i, u32 *l) -+{ -+ buf += *i; -+ if (*l >= n - 16) { -+ (*i)++; (*i)++; -+ *l = 16 - n + (*l); -+ val <<= *l; -+ *buf = *buf | ((val >> 16) & 0xff); -+ *(++buf) = (val >> 8) & 0xff; -+ *(++buf) = val & 0xff; -+ if (*l == 0) { -+ *l = 8; -+ (*i)++; -+ *(++buf) = 0; -+ } -+ } else { -+ (*i)++; (*i)++; (*i)++; -+ *l = 24 - n + (*l); -+ val <<= *l; -+ *buf = *buf | ((val >> 24) & 0xff); -+ *(++buf) = (val >> 16) & 0xff; -+ *(++buf) = (val >> 8) & 0xff; -+ *(++buf) = val & 0xff; -+ } -+} -+ -+static int -+mppc_compress(struct ppp_mppe_state *state, unsigned char *ibuf, -+ unsigned char *obuf, int isize, int osize) -+{ -+ u32 olen, off, len, idx, i, l; -+ u8 *hist, *sbuf, *p, *q, *r, *s; -+ -+ /* -+ At this point, to avoid possible buffer overflow caused by packet -+ expansion during/after compression, we should make sure that -+ osize >= (((isize*9)/8)+1)+2, but we don't do that because in -+ ppp_generic.c we simply allocate bigger obuf. -+ -+ Maximum MPPC packet expansion is 12.5%. This is the worst case when -+ all octets in the input buffer are >= 0x80 and we cannot find any -+ repeated tokens. Additionally we have to reserve 2 bytes for MPPE/MPPC -+ status bits and coherency counter. -+ */ -+ -+ hist = state->hist + MPPE_HIST_LEN; -+ /* check if there is enough room at the end of the history */ -+ if (state->histptr + isize >= 2*MPPE_HIST_LEN) { -+ state->bits |= MPPE_BIT_RESET; -+ state->histptr = MPPE_HIST_LEN; -+ memcpy(state->hist, hist, MPPE_HIST_LEN); -+ } -+ /* add packet to the history; isize must be <= MPPE_HIST_LEN */ -+ sbuf = state->hist + state->histptr; -+ memcpy(sbuf, ibuf, isize); -+ state->histptr += isize; -+ -+ /* compress data */ -+ r = sbuf + isize; -+ *obuf = olen = i = 0; -+ l = 8; -+ while (i < isize - 2) { -+ s = q = sbuf + i; -+ idx = ((40543*((((s[0]<<4)^s[1])<<4)^s[2]))>>4) & 0x1fff; -+ p = hist + state->hash[idx]; -+ state->hash[idx] = (u16) (s - hist); -+ off = s - p; -+ if (off > MPPE_HIST_LEN - 1 || off < 1 || *p++ != *s++ || *p++ != *s++ || -+ *p++ != *s++) { -+ /* no match found; encode literal byte */ -+ if (ibuf[i] < 0x80) { /* literal byte < 0x80 */ -+ putbits8(obuf, (u32) ibuf[i], 8, &olen, &l); -+ } else { /* literal byte >= 0x80 */ -+ putbits16(obuf, (u32) (0x100|(ibuf[i]&0x7f)), 9, &olen, &l); -+ } -+ ++i; -+ continue; -+ } -+ if (r - q >= 64) { -+ *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || -+ *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || -+ *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || -+ *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || -+ *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || -+ *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || -+ *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || -+ *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || -+ *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || -+ *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || -+ *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || -+ *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || -+ *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || -+ *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || -+ *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || -+ *p++ != *s++; -+ if (s - q == 64) { -+ p--; s--; -+ while((*p++ == *s++) && (s < r) && (p < q)); -+ } -+ } else { -+ while((*p++ == *s++) && (s < r) && (p < q)); -+ } -+ len = s - q - 1; -+ i += len; -+ -+ /* at least 3 character match found; code data */ -+ /* encode offset */ -+ if (off < 64) { /* 10-bit offset; 0 <= offset < 64 */ -+ putbits16(obuf, 0x3c0|off, 10, &olen, &l); -+ } else if (off < 320) { /* 12-bit offset; 64 <= offset < 320 */ -+ putbits16(obuf, 0xe00|(off-64), 12, &olen, &l); -+ } else if (off < 8192) { /* 16-bit offset; 320 <= offset < 8192 */ -+ putbits16(obuf, 0xc000|(off-320), 16, &olen, &l); -+ } else { -+ /* This shouldn't happen; we return 0 what means "packet expands", -+ and we send packet uncompressed. */ -+ if (state->debug) -+ printk(KERN_DEBUG "%s%d: wrong offset value: %d\n", -+ __FUNCTION__, state->unit, off); -+ return 0; -+ } -+ /* encode length of match */ -+ if (len < 4) { /* length = 3 */ -+ putbits8(obuf, 0, 1, &olen, &l); -+ } else if (len < 8) { /* 4 <= length < 8 */ -+ putbits8(obuf, 0x08|(len&0x03), 4, &olen, &l); -+ } else if (len < 16) { /* 8 <= length < 16 */ -+ putbits8(obuf, 0x30|(len&0x07), 6, &olen, &l); -+ } else if (len < 32) { /* 16 <= length < 32 */ -+ putbits8(obuf, 0xe0|(len&0x0f), 8, &olen, &l); -+ } else if (len < 64) { /* 32 <= length < 64 */ -+ putbits16(obuf, 0x3c0|(len&0x1f), 10, &olen, &l); -+ } else if (len < 128) { /* 64 <= length < 128 */ -+ putbits16(obuf, 0xf80|(len&0x3f), 12, &olen, &l); -+ } else if (len < 256) { /* 128 <= length < 256 */ -+ putbits16(obuf, 0x3f00|(len&0x7f), 14, &olen, &l); -+ } else if (len < 512) { /* 256 <= length < 512 */ -+ putbits16(obuf, 0xfe00|(len&0xff), 16, &olen, &l); -+ } else if (len < 1024) { /* 512 <= length < 1024 */ -+ putbits24(obuf, 0x3fc00|(len&0x1ff), 18, &olen, &l); -+ } else if (len < 2048) { /* 1024 <= length < 2048 */ -+ putbits24(obuf, 0xff800|(len&0x3ff), 20, &olen, &l); -+ } else if (len < 4096) { /* 2048 <= length < 4096 */ -+ putbits24(obuf, 0x3ff000|(len&0x7ff), 22, &olen, &l); -+ } else if (len < 8192) { /* 4096 <= length < 8192 */ -+ putbits24(obuf, 0xffe000|(len&0xfff), 24, &olen, &l); -+ } else { -+ /* This shouldn't happen; we return 0 what means "packet expands", -+ and send packet uncompressed. */ -+ if (state->debug) -+ printk(KERN_DEBUG "%s%d: wrong length of match value: %d\n", -+ __FUNCTION__, state->unit, len); -+ return 0; -+ } -+ } -+ -+ /* Add remaining octets to the output */ -+ while(isize - i > 0) { -+ if (ibuf[i] < 0x80) { /* literal byte < 0x80 */ -+ putbits8(obuf, (u32) ibuf[i++], 8, &olen, &l); -+ } else { /* literal byte >= 0x80 */ -+ putbits16(obuf, (u32) (0x100|(ibuf[i++]&0x7f)), 9, &olen, &l); -+ } -+ } -+ /* Reset unused bits of the last output octet */ -+ if ((l != 0) && (l != 8)) { -+ putbits8(obuf, 0, l, &olen, &l); -+ } -+ -+ return (int) olen; -+} -+ -+int -+mppe_compress(void *arg, unsigned char *ibuf, unsigned char *obuf, -+ int isize, int osize) -+{ -+ struct ppp_mppe_state *state = (struct ppp_mppe_state *) arg; -+ int proto, olen, complen, off; -+ unsigned char *wptr; -+ -+ /* Check that the protocol is in the range we handle. */ -+ proto = PPP_PROTOCOL(ibuf); -+ if (proto < 0x0021 || proto > 0x00fa) -+ return 0; -+ -+ wptr = obuf; -+ /* Copy over the PPP header */ -+ wptr[0] = PPP_ADDRESS(ibuf); -+ wptr[1] = PPP_CONTROL(ibuf); -+ wptr[2] = PPP_COMP >> 8; -+ wptr[3] = PPP_COMP; -+ wptr += PPP_HDRLEN + (MPPE_OVHD / 2); /* Leave two octets for MPPE/MPPC bits */ -+ -+ /* -+ * In ver. 0.99 protocol field was compressed. Deflate and BSD compress -+ * do PFC before actual compression, RCF2118 and RFC3078 are not precise -+ * on this topic so I decided to do PFC. Unfortunately this change caused -+ * incompatibility with older/other MPPE/MPPC modules. I have received -+ * a lot of complaints from unexperienced users so I have decided to revert -+ * to previous state, i.e. the protocol field is sent uncompressed now. -+ * Although this may be changed in the future. -+ * -+ * Receiving side (mppe_decompress()) still accepts packets with compressed -+ * and uncompressed protocol field so you shouldn't get "Unsupported protocol -+ * 0x2145 received" messages anymore. -+ */ -+ //off = (proto > 0xff) ? 2 : 3; /* PFC - skip first protocol byte if 0 */ -+ off = 2; -+ -+ ibuf += off; -+ -+ mppe_increase_ccount(state); -+ -+ if (state->nextflushed) { -+ state->bits |= MPPE_BIT_FLUSHED; -+ state->nextflushed = 0; -+ if (state->mppe && !state->stateless) { -+ /* -+ * If this is the flag packet, the key has been already changed in -+ * mppe_increase_ccount() so we dont't do it once again. -+ */ -+ if ((state->ccount & 0xff) != 0xff) { -+ arc4_setkey(state, state->session_key, state->keylen); -+ } -+ } -+ if (state->mppc) { /* reset history */ -+ state->bits |= MPPE_BIT_RESET; -+ state->histptr = MPPE_HIST_LEN; -+ memset(state->hist + MPPE_HIST_LEN, 0, MPPE_HIST_LEN*sizeof(u8)); -+ } -+ } -+ -+ if (state->mppc && !state->mppe) { /* Do only compression */ -+ complen = mppc_compress(state, ibuf, wptr, isize - off, -+ osize - PPP_HDRLEN - (MPPE_OVHD / 2)); -+ /* -+ * TODO: Implement an heuristics to handle packet expansion in a smart -+ * way. Now, when a packet expands, we send it as uncompressed and -+ * when next packet is sent we have to reset compressor's history. -+ * Maybe it would be better to send such packet as compressed in order -+ * to keep history's continuity. -+ */ -+ if ((complen > isize) || (complen > osize - PPP_HDRLEN) || -+ (complen == 0)) { -+ /* packet expands */ -+ state->nextflushed = 1; -+ memcpy(wptr, ibuf, isize - off); -+ olen = isize - (off - 2) + MPPE_OVHD; -+ (state->stats).inc_bytes += olen; -+ (state->stats).inc_packets++; -+ } else { -+ state->bits |= MPPE_BIT_COMP; -+ olen = complen + PPP_HDRLEN + (MPPE_OVHD / 2); -+ (state->stats).comp_bytes += olen; -+ (state->stats).comp_packets++; -+ } -+ } else { /* Do encryption with or without compression */ -+ state->bits |= MPPE_BIT_ENCRYPTED; -+ if (!state->mppc && state->mppe) { /* Do only encryption */ -+ /* read from ibuf, write to wptr, adjust for PPP_HDRLEN */ -+ arc4_encrypt(state, ibuf, isize - off, wptr); -+ olen = isize - (off - 2) + MPPE_OVHD; -+ (state->stats).inc_bytes += olen; -+ (state->stats).inc_packets++; -+ } else { /* Do compression and then encryption - RFC3078 */ -+ complen = mppc_compress(state, ibuf, wptr, isize - off, -+ osize - PPP_HDRLEN - (MPPE_OVHD / 2)); -+ /* -+ * TODO: Implement an heuristics to handle packet expansion in a smart -+ * way. Now, when a packet expands, we send it as uncompressed and -+ * when next packet is sent we have to reset compressor's history. -+ * Maybe it would be good to send such packet as compressed in order -+ * to keep history's continuity. -+ */ -+ if ((complen > isize) || (complen > osize - PPP_HDRLEN) || -+ (complen == 0)) { -+ /* packet expands */ -+ state->nextflushed = 1; -+ arc4_encrypt(state, ibuf, isize - off, wptr); -+ olen = isize - (off - 2) + MPPE_OVHD; -+ (state->stats).inc_bytes += olen; -+ (state->stats).inc_packets++; -+ } else { -+ state->bits |= MPPE_BIT_COMP; -+ /* Hack warning !!! RC4 implementation which we use does -+ encryption "in place" - it means that input and output -+ buffers can be *the same* memory area. Therefore we don't -+ need to use a temporary buffer. But be careful - other -+ implementations don't have to be so nice. -+ I used to use ibuf as temporary buffer here, but it led -+ packet sniffers into error. Thanks to Wilfried Weissmann -+ for pointing that. */ -+ arc4_encrypt(state, wptr, complen, wptr); -+ olen = complen + PPP_HDRLEN + (MPPE_OVHD / 2); -+ (state->stats).comp_bytes += olen; -+ (state->stats).comp_packets++; -+ } -+ } -+ } -+ -+ /* write status bits and coherency counter into the output buffer */ -+ wptr = obuf + PPP_HDRLEN; -+ wptr[0] = MPPE_CTRLHI(state); -+ wptr[1] = MPPE_CTRLLO(state); -+ -+ state->bits = 0; -+ -+ (state->stats).unc_bytes += isize; -+ (state->stats).unc_packets++; -+ -+ return olen; -+} -+ -+/***************************/ -+/*** Decompression stuff ***/ -+/***************************/ -+static inline u32 getbits(const u8 *buf, const u32 n, u32 *i, u32 *l) -+{ -+ static const u32 m[] = {0x00, 0x01, 0x03, 0x07, 0x0f, 0x1f, 0x3f, 0x7f, 0xff}; -+ u32 res, ol; -+ -+ ol = *l; -+ if (*l >= n) { -+ *l = (*l) - n; -+ res = (buf[*i] & m[ol]) >> (*l); -+ if (*l == 0) { -+ *l = 8; -+ (*i)++; -+ } -+ } else { -+ *l = 8 - n + (*l); -+ res = (buf[(*i)++] & m[ol]) << 8; -+ res = (res | buf[*i]) >> (*l); -+ } -+ -+ return res; -+} -+ -+static inline u32 getbyte(const u8 *buf, const u32 i, const u32 l) -+{ -+ if (l == 8) { -+ return buf[i]; -+ } else { -+ return (((buf[i] << 8) | buf[i+1]) >> l) & 0xff; -+ } -+} -+ -+static inline void lamecopy(u8 *dst, u8 *src, u32 len) -+{ -+ while (len--) -+ *dst++ = *src++; -+} -+ -+static int -+mppc_decompress(struct ppp_mppe_state *state, unsigned char *ibuf, -+ unsigned char *obuf, int isize, int osize) -+{ -+ u32 olen, off, len, bits, val, sig, i, l; -+ u8 *history, *s; -+ -+ history = state->hist + state->histptr; -+ olen = len = i = 0; -+ l = 8; -+ bits = isize * 8; -+ while (bits >= 8) { -+ val = getbyte(ibuf, i++, l); -+ if (val < 0x80) { /* literal byte < 0x80 */ -+ if (state->histptr < 2*MPPE_HIST_LEN) { -+ /* copy uncompressed byte to the history */ -+ (state->hist)[(state->histptr)++] = (u8) val; -+ } else { -+ /* buffer overflow; drop packet */ -+ if (state->debug) -+ printk(KERN_ERR "%s%d: trying to write outside history " -+ "buffer\n", __FUNCTION__, state->unit); -+ return DECOMP_ERROR; -+ } -+ olen++; -+ bits -= 8; -+ continue; -+ } -+ -+ sig = val & 0xc0; -+ if (sig == 0x80) { /* literal byte >= 0x80 */ -+ if (state->histptr < 2*MPPE_HIST_LEN) { -+ /* copy uncompressed byte to the history */ -+ (state->hist)[(state->histptr)++] = -+ (u8) (0x80|((val&0x3f)<<1)|getbits(ibuf, 1 , &i ,&l)); -+ } else { -+ /* buffer overflow; drop packet */ -+ if (state->debug) -+ printk(KERN_ERR "%s%d: trying to write outside history " -+ "buffer\n", __FUNCTION__, state->unit); -+ return DECOMP_ERROR; -+ } -+ olen++; -+ bits -= 9; -+ continue; -+ } -+ -+ /* Not a literal byte so it must be an (offset,length) pair */ -+ /* decode offset */ -+ sig = val & 0xf0; -+ if (sig == 0xf0) { /* 10-bit offset; 0 <= offset < 64 */ -+ off = (((val&0x0f)<<2)|getbits(ibuf, 2 , &i ,&l)); -+ bits -= 10; -+ } else { -+ if (sig == 0xe0) { /* 12-bit offset; 64 <= offset < 320 */ -+ off = ((((val&0x0f)<<4)|getbits(ibuf, 4 , &i ,&l))+64); -+ bits -= 12; -+ } else { -+ if ((sig&0xe0) == 0xc0) {/* 16-bit offset; 320 <= offset < 8192 */ -+ off = ((((val&0x1f)<<8)|getbyte(ibuf, i++, l))+320); -+ bits -= 16; -+ if (off > MPPE_HIST_LEN - 1) { -+ if (state->debug) -+ printk(KERN_DEBUG "%s%d: too big offset value: %d\n", -+ __FUNCTION__, state->unit, off); -+ return DECOMP_ERROR; -+ } -+ } else { /* this shouldn't happen */ -+ if (state->debug) -+ printk(KERN_DEBUG "%s%d: cannot decode offset value\n", -+ __FUNCTION__, state->unit); -+ return DECOMP_ERROR; -+ } -+ } -+ } -+ /* decode length of match */ -+ val = getbyte(ibuf, i, l); -+ if ((val & 0x80) == 0x00) { /* len = 3 */ -+ len = 3; -+ bits--; -+ getbits(ibuf, 1 , &i ,&l); -+ } else if ((val & 0xc0) == 0x80) { /* 4 <= len < 8 */ -+ len = 0x04 | ((val>>4) & 0x03); -+ bits -= 4; -+ getbits(ibuf, 4 , &i ,&l); -+ } else if ((val & 0xe0) == 0xc0) { /* 8 <= len < 16 */ -+ len = 0x08 | ((val>>2) & 0x07); -+ bits -= 6; -+ getbits(ibuf, 6 , &i ,&l); -+ } else if ((val & 0xf0) == 0xe0) { /* 16 <= len < 32 */ -+ len = 0x10 | (val & 0x0f); -+ bits -= 8; -+ i++; -+ } else { -+ bits -= 8; -+ val = (val << 8) | getbyte(ibuf, ++i, l); -+ if ((val & 0xf800) == 0xf000) { /* 32 <= len < 64 */ -+ len = 0x0020 | ((val >> 6) & 0x001f); -+ bits -= 2; -+ getbits(ibuf, 2 , &i ,&l); -+ } else if ((val & 0xfc00) == 0xf800) { /* 64 <= len < 128 */ -+ len = 0x0040 | ((val >> 4) & 0x003f); -+ bits -= 4; -+ getbits(ibuf, 4 , &i ,&l); -+ } else if ((val & 0xfe00) == 0xfc00) { /* 128 <= len < 256 */ -+ len = 0x0080 | ((val >> 2) & 0x007f); -+ bits -= 6; -+ getbits(ibuf, 6 , &i ,&l); -+ } else if ((val & 0xff00) == 0xfe00) { /* 256 <= len < 512 */ -+ len = 0x0100 | (val & 0x00ff); -+ bits -= 8; -+ i++; -+ } else { -+ bits -= 8; -+ val = (val << 8) | getbyte(ibuf, ++i, l); -+ if ((val & 0xff8000) == 0xff0000) { /* 512 <= len < 1024 */ -+ len = 0x000200 | ((val >> 6) & 0x0001ff); -+ bits -= 2; -+ getbits(ibuf, 2 , &i ,&l); -+ } else if ((val & 0xffc000) == 0xff8000) {/* 1024 <= len < 2048 */ -+ len = 0x000400 | ((val >> 4) & 0x0003ff); -+ bits -= 4; -+ getbits(ibuf, 4 , &i ,&l); -+ } else if ((val & 0xffe000) == 0xffc000) {/* 2048 <= len < 4096 */ -+ len = 0x000800 | ((val >> 2) & 0x0007ff); -+ bits -= 6; -+ getbits(ibuf, 6 , &i ,&l); -+ } else if ((val & 0xfff000) == 0xffe000) {/* 4096 <= len < 8192 */ -+ len = 0x001000 | (val & 0x000fff); -+ bits -= 8; -+ i++; -+ } else { /* this shouldn't happen */ -+ if (state->debug) -+ printk(KERN_DEBUG "%s%d: wrong length code: 0x%X\n", -+ __FUNCTION__, state->unit, val); -+ return DECOMP_ERROR; -+ } -+ } -+ } -+ s = state->hist + state->histptr; -+ state->histptr += len; -+ olen += len; -+ if (state->histptr < 2*MPPE_HIST_LEN) { -+ /* copy uncompressed bytes to the history */ -+ -+ /* In some cases len may be greater than off. It means that memory -+ * areas pointed by s and s-off overlap. I had used memmove() here -+ * because I thought that it acts as libc's version. Unfortunately, -+ * I was wrong. :-) I got strange errors sometimes. Wilfried suggested -+ * using of byte by byte copying here and strange errors disappeared. -+ */ -+ lamecopy(s, s - off, len); -+ } else { -+ /* buffer overflow; drop packet */ -+ if (state->debug) -+ printk(KERN_ERR "%s%d: trying to write outside history " -+ "buffer\n", __FUNCTION__, state->unit); -+ return DECOMP_ERROR; -+ } -+ } -+ -+ /* Do PFC decompression */ -+ len = olen; -+ if ((history[0] & 0x01) != 0) { -+ obuf[0] = 0; -+ obuf++; -+ len++; -+ } -+ -+ if (len <= osize) { -+ /* copy uncompressed packet to the output buffer */ -+ memcpy(obuf, history, olen); -+ } else { -+ /* buffer overflow; drop packet */ -+ if (state->debug) -+ printk(KERN_ERR "%s%d: too big uncompressed packet: %d\n", -+ __FUNCTION__, state->unit, len + (PPP_HDRLEN / 2)); -+ return DECOMP_ERROR; -+ } -+ -+ return (int) len; -+} -+ -+int -+mppe_decompress(void *arg, unsigned char *ibuf, int isize, -+ unsigned char *obuf, int osize) -+{ -+ struct ppp_mppe_state *state = (struct ppp_mppe_state *)arg; -+ int seq, bits, uncomplen; -+ -+ if (isize <= PPP_HDRLEN + MPPE_OVHD) { -+ if (state->debug) { -+ printk(KERN_DEBUG "%s%d: short packet (len=%d)\n", __FUNCTION__, -+ state->unit, isize); -+ } -+ return DECOMP_ERROR; -+ } -+ -+ /* Get coherency counter and control bits from input buffer */ -+ seq = MPPE_CCOUNT(ibuf); -+ bits = MPPE_BITS(ibuf); -+ -+ if (state->stateless) { -+ /* RFC 3078, sec 8.1. */ -+ mppe_increase_ccount(state); -+ if ((seq != state->ccount) && state->debug) -+ printk(KERN_DEBUG "%s%d: bad sequence number: %d, expected: %d\n", -+ __FUNCTION__, state->unit, seq, state->ccount); -+ while (seq != state->ccount) -+ mppe_increase_ccount(state); -+ } else { -+ /* RFC 3078, sec 8.2. */ -+ if (state->flushexpected) { /* discard state */ -+ if ((bits & MPPE_BIT_FLUSHED)) { /* we received expected FLUSH bit */ -+ while (seq != state->ccount) -+ mppe_increase_ccount(state); -+ state->flushexpected = 0; -+ } else /* drop packet*/ -+ return DECOMP_ERROR; -+ } else { /* normal state */ -+ mppe_increase_ccount(state); -+ if (seq != state->ccount) { -+ /* Packet loss detected, enter the discard state. */ -+ if (state->debug) -+ printk(KERN_DEBUG "%s%d: bad sequence number: %d, expected: %d\n", -+ __FUNCTION__, state->unit, seq, state->ccount); -+ state->flushexpected = 1; -+ return DECOMP_ERROR; -+ } -+ } -+ if (state->mppe && (bits & MPPE_BIT_FLUSHED)) { -+ arc4_setkey(state, state->session_key, state->keylen); -+ } -+ } -+ -+ if (state->mppc && (bits & (MPPE_BIT_FLUSHED | MPPE_BIT_RESET))) { -+ state->histptr = MPPE_HIST_LEN; -+ if ((bits & MPPE_BIT_FLUSHED)) { -+ memset(state->hist + MPPE_HIST_LEN, 0, MPPE_HIST_LEN*sizeof(u8)); -+ } else -+ if ((bits & MPPE_BIT_RESET)) { -+ memcpy(state->hist, state->hist + MPPE_HIST_LEN, MPPE_HIST_LEN); -+ } -+ } -+ -+ /* Fill in the first part of the PPP header. The protocol field -+ comes from the decompressed data. */ -+ obuf[0] = PPP_ADDRESS(ibuf); -+ obuf[1] = PPP_CONTROL(ibuf); -+ obuf += PPP_HDRLEN / 2; -+ -+ if (state->mppe) { /* process encrypted packet */ -+ if ((bits & MPPE_BIT_ENCRYPTED)) { -+ /* OK, packet encrypted, so decrypt it */ -+ if (state->mppc && (bits & MPPE_BIT_COMP)) { -+ /* Hack warning !!! RC4 implementation which we use does -+ decryption "in place" - it means that input and output -+ buffers can be *the same* memory area. Therefore we don't -+ need to use a temporary buffer. But be careful - other -+ implementations don't have to be so nice. */ -+ arc4_decrypt(state, ibuf + PPP_HDRLEN + (MPPE_OVHD / 2), isize - -+ PPP_HDRLEN - (MPPE_OVHD / 2), ibuf + PPP_HDRLEN + -+ (MPPE_OVHD / 2)); -+ uncomplen = mppc_decompress(state, ibuf + PPP_HDRLEN + -+ (MPPE_OVHD / 2), obuf, isize - -+ PPP_HDRLEN - (MPPE_OVHD / 2), -+ osize - (PPP_HDRLEN / 2)); -+ if (uncomplen == DECOMP_ERROR) { -+ state->flushexpected = 1; -+ return DECOMP_ERROR; -+ } -+ uncomplen += PPP_HDRLEN / 2; -+ (state->stats).comp_bytes += isize; -+ (state->stats).comp_packets++; -+ } else { -+ uncomplen = isize - MPPE_OVHD; -+ /* Decrypt the first byte in order to check if it is -+ compressed or uncompressed protocol field */ -+ arc4_decrypt(state, ibuf + PPP_HDRLEN + (MPPE_OVHD / 2), 1, obuf); -+ /* Do PFC decompression */ -+ if ((obuf[0] & 0x01) != 0) { -+ obuf[1] = obuf[0]; -+ obuf[0] = 0; -+ obuf++; -+ uncomplen++; -+ } -+ /* And finally, decrypt the rest of the frame. */ -+ arc4_decrypt(state, ibuf + PPP_HDRLEN + (MPPE_OVHD / 2) + 1, -+ isize - PPP_HDRLEN - (MPPE_OVHD / 2) - 1, obuf + 1); -+ (state->stats).inc_bytes += isize; -+ (state->stats).inc_packets++; -+ } -+ } else { /* this shouldn't happen */ -+ if (state->debug) -+ printk(KERN_ERR "%s%d: encryption negotiated but not an " -+ "encrypted packet received\n", __FUNCTION__, state->unit); -+ mppe_change_key(state, 0); -+ state->flushexpected = 1; -+ return DECOMP_ERROR; -+ } -+ } else { -+ if (state->mppc) { /* no MPPE, only MPPC */ -+ if ((bits & MPPE_BIT_COMP)) { -+ uncomplen = mppc_decompress(state, ibuf + PPP_HDRLEN + -+ (MPPE_OVHD / 2), obuf, isize - -+ PPP_HDRLEN - (MPPE_OVHD / 2), -+ osize - (PPP_HDRLEN / 2)); -+ if (uncomplen == DECOMP_ERROR) { -+ state->flushexpected = 1; -+ return DECOMP_ERROR; -+ } -+ uncomplen += PPP_HDRLEN / 2; -+ (state->stats).comp_bytes += isize; -+ (state->stats).comp_packets++; -+ } else { -+ memcpy(obuf, ibuf + PPP_HDRLEN + (MPPE_OVHD / 2), isize - -+ PPP_HDRLEN - (MPPE_OVHD / 2)); -+ uncomplen = isize - MPPE_OVHD; -+ (state->stats).inc_bytes += isize; -+ (state->stats).inc_packets++; -+ } -+ } else { /* this shouldn't happen */ -+ if (state->debug) -+ printk(KERN_ERR "%s%d: error - not an MPPC or MPPE frame " -+ "received\n", __FUNCTION__, state->unit); -+ state->flushexpected = 1; -+ return DECOMP_ERROR; -+ } -+ } -+ -+ (state->stats).unc_bytes += uncomplen; -+ (state->stats).unc_packets++; -+ -+ return uncomplen; -+} -+ -+ -+/************************************************************ -+ * Module interface table -+ ************************************************************/ -+ -+/* These are in ppp_generic.c */ -+extern int ppp_register_compressor (struct compressor *cp); -+extern void ppp_unregister_compressor (struct compressor *cp); -+ -+/* -+ * Functions exported to ppp_generic.c. -+ * -+ * In case of MPPC/MPPE there is no need to process incompressible data -+ * because such a data is sent in MPPC/MPPE frame. Therefore the (*incomp) -+ * callback function isn't needed. -+ */ -+struct compressor ppp_mppe = { -+ .compress_proto = CI_MPPE, -+ .comp_alloc = mppe_comp_alloc, -+ .comp_free = mppe_comp_free, -+ .comp_init = mppe_comp_init, -+ .comp_reset = mppe_comp_reset, -+ .compress = mppe_compress, -+ .comp_stat = mppe_stats, -+ .decomp_alloc = mppe_decomp_alloc, -+ .decomp_free = mppe_comp_free, -+ .decomp_init = mppe_decomp_init, -+ .decomp_reset = mppe_decomp_reset, -+ .decompress = mppe_decompress, -+ .incomp = NULL, -+ .decomp_stat = mppe_stats, -+ .owner = THIS_MODULE -+}; -+ -+/************************************************************ -+ * Module support routines -+ ************************************************************/ -+ -+int __init mppe_module_init(void) -+{ -+ int answer; -+ -+ if (!(crypto_alg_available("arc4", 0) && crypto_alg_available("sha1", 0))) { -+ printk(KERN_ERR "Kernel doesn't provide ARC4 and/or SHA1 algorithms " -+ "required by MPPE/MPPC. Check CryptoAPI configuration.\n"); -+ return -ENODEV; -+ } -+ -+ /* Allocate space for SHAPad1, SHAPad2 and ... */ -+ sha_pad = kmalloc(sizeof(struct sha_pad), GFP_KERNEL); -+ if (sha_pad == NULL) -+ return -ENOMEM; -+ /* ... initialize them */ -+ memset(sha_pad->sha_pad1, 0x00, sizeof(sha_pad->sha_pad1)); -+ memset(sha_pad->sha_pad2, 0xf2, sizeof(sha_pad->sha_pad2)); -+ -+ answer = ppp_register_compressor(&ppp_mppe); -+ if (answer == 0) { -+ printk(KERN_INFO "MPPE/MPPC encryption/compression module registered\n"); -+ } -+ return answer; -+} -+ -+void __exit mppe_module_cleanup(void) -+{ -+ kfree(sha_pad); -+ ppp_unregister_compressor(&ppp_mppe); -+ printk(KERN_INFO "MPPE/MPPC encryption/compression module unregistered\n"); -+} -+ -+module_init(mppe_module_init); -+module_exit(mppe_module_cleanup); -+ -+MODULE_AUTHOR("Jan Dubiec <jdx@slackware.pl>"); -+MODULE_DESCRIPTION("MPPE/MPPC encryption/compression module for Linux"); -+MODULE_VERSION("1.2"); -+MODULE_LICENSE("Dual BSD/GPL"); -+MODULE_ALIAS("ppp-compress-" __stringify(CI_MPPE)); -diff -ruN linux-2.6.12.orig/include/linux/ppp-comp.h linux-2.6.12/include/linux/ppp-comp.h ---- linux-2.6.12.orig/include/linux/ppp-comp.h 2004-12-24 22:33:47.000000000 +0100 -+++ linux-2.6.12/include/linux/ppp-comp.h 2005-06-28 20:07:01.000000000 +0200 -@@ -28,7 +28,7 @@ - */ - - /* -- * ==FILEVERSION 980319== -+ * ==FILEVERSION 20040509== - * - * NOTE TO MAINTAINERS: - * If you modify this file at all, please set the above date. -@@ -80,7 +80,7 @@ - - /* Compress a packet */ - int (*compress) (void *state, unsigned char *rptr, -- unsigned char *obuf, int isize, int osize); -+ unsigned char *obuf, int isize, int osize); - - /* Return compression statistics */ - void (*comp_stat) (void *state, struct compstat *stats); -@@ -101,7 +101,7 @@ - - /* Decompress a packet. */ - int (*decompress) (void *state, unsigned char *ibuf, int isize, -- unsigned char *obuf, int osize); -+ unsigned char *obuf, int osize); - - /* Update state for an incompressible packet received */ - void (*incomp) (void *state, unsigned char *ibuf, int icnt); -@@ -191,6 +191,42 @@ - #define DEFLATE_CHK_SEQUENCE 0 - - /* -+ * Definitions for MPPE/MPPC. -+ */ -+ -+#define CI_MPPE 18 /* config option for MPPE */ -+#define CILEN_MPPE 6 /* length of config option */ -+ -+#define MPPE_OVHD 4 /* MPPE overhead */ -+#define MPPE_MAX_KEY_LEN 16 /* largest key length (128-bit) */ -+ -+#define MPPE_STATELESS 0x01 /* configuration bit H */ -+#define MPPE_40BIT 0x20 /* configuration bit L */ -+#define MPPE_56BIT 0x80 /* configuration bit M */ -+#define MPPE_128BIT 0x40 /* configuration bit S */ -+#define MPPE_MPPC 0x01 /* configuration bit C */ -+ -+/* -+ * Definitions for Stac LZS. -+ */ -+ -+#define CI_LZS 17 /* config option for Stac LZS */ -+#define CILEN_LZS 5 /* length of config option */ -+ -+#define LZS_OVHD 4 /* max. LZS overhead */ -+#define LZS_HIST_LEN 2048 /* LZS history size */ -+#define LZS_MAX_CCOUNT 0x0FFF /* max. coherency counter value */ -+ -+#define LZS_MODE_NONE 0 -+#define LZS_MODE_LCB 1 -+#define LZS_MODE_CRC 2 -+#define LZS_MODE_SEQ 3 -+#define LZS_MODE_EXT 4 -+ -+#define LZS_EXT_BIT_FLUSHED 0x80 /* bit A */ -+#define LZS_EXT_BIT_COMP 0x20 /* bit C */ -+ -+/* - * Definitions for other, as yet unsupported, compression methods. - */ - diff --git a/packages/linux/linux-dht-walnut-2.6.12.6/ppc_40x_uboot.patch b/packages/linux/linux-dht-walnut-2.6.12.6/ppc_40x_uboot.patch deleted file mode 100644 index fcb700c5b4..0000000000 --- a/packages/linux/linux-dht-walnut-2.6.12.6/ppc_40x_uboot.patch +++ /dev/null @@ -1,693 +0,0 @@ -diff-tree 3e9e7c1d0b7a36fb8affb973a054c5098e27baa8 (from 90eb2665841d7b444602736e2141a01c948f75b1)
-Author: Matt Porter <mporter@kernel.crashing.org>
-Date: Mon Nov 7 00:58:15 2005 -0800
-
- [PATCH] ppc32: cleanup AMCC PPC40x eval boards to support U-Boot
-
- Cleanup PPC40x eval boards (bubinga, walnut and sycamore) to support U-Boot
- as bootloader. The OpenBIOS bd_info struct is not used in the kernel
- anymore (only U-Boot now).
-
- uImage (U-Boot) tested on walnut, sycamore and bubinga
- zImage (OpenBIOS) tested on sycamore, bubinga and ebony
-
- Signed-off-by: Stefan Roese <sr@denx.de>
- Signed-off-by: Matt Porter <mporter@kernel.crashing.org>
- Signed-off-by: Andrew Morton <akpm@osdl.org>
- Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
-diff --git a/arch/ppc/boot/simple/Makefile b/arch/ppc/boot/simple/Makefile
-index ff0904e..82df88b 100644
---- a/arch/ppc/boot/simple/Makefile
-+++ b/arch/ppc/boot/simple/Makefile
-@@ -67,6 +67,12 @@ zimageinitrd-$(CONFIG_BAMBOO) := zImage
- entrypoint-$(CONFIG_BAMBOO) := 0x01000000
- extra.o-$(CONFIG_BAMBOO) := pibs.o
-
-+ zimage-$(CONFIG_BUBINGA) := zImage-TREE
-+zimageinitrd-$(CONFIG_BUBINGA) := zImage.initrd-TREE
-+ end-$(CONFIG_BUBINGA) := bubinga
-+ entrypoint-$(CONFIG_BUBINGA) := 0x01000000
-+ extra.o-$(CONFIG_BUBINGA) := openbios.o
-+
- zimage-$(CONFIG_EBONY) := zImage-TREE
- zimageinitrd-$(CONFIG_EBONY) := zImage.initrd-TREE
- end-$(CONFIG_EBONY) := ebony
-@@ -91,6 +97,18 @@ zimageinitrd-$(CONFIG_OCOTEA) := zImage
- entrypoint-$(CONFIG_OCOTEA) := 0x01000000
- extra.o-$(CONFIG_OCOTEA) := pibs.o
-
-+ zimage-$(CONFIG_SYCAMORE) := zImage-TREE
-+zimageinitrd-$(CONFIG_SYCAMORE) := zImage.initrd-TREE
-+ end-$(CONFIG_SYCAMORE) := sycamore
-+ entrypoint-$(CONFIG_SYCAMORE) := 0x01000000
-+ extra.o-$(CONFIG_SYCAMORE) := openbios.o
-+
-+ zimage-$(CONFIG_WALNUT) := zImage-TREE
-+zimageinitrd-$(CONFIG_WALNUT) := zImage.initrd-TREE
-+ end-$(CONFIG_WALNUT) := walnut
-+ entrypoint-$(CONFIG_WALNUT) := 0x01000000
-+ extra.o-$(CONFIG_WALNUT) := openbios.o
-+
- extra.o-$(CONFIG_EV64260) := misc-ev64260.o
- end-$(CONFIG_EV64260) := ev64260
- cacheflag-$(CONFIG_EV64260) := -include $(clear_L2_L3)
-@@ -168,7 +186,8 @@ OBJCOPY_ARGS := -O elf32-powerpc
-
- # head.o and relocate.o must be at the start.
- boot-y := head.o relocate.o $(extra.o-y) $(misc-y)
--boot-$(CONFIG_40x) += embed_config.o
-+boot-$(CONFIG_REDWOOD_5) += embed_config.o
-+boot-$(CONFIG_REDWOOD_6) += embed_config.o
- boot-$(CONFIG_8xx) += embed_config.o
- boot-$(CONFIG_8260) += embed_config.o
- boot-$(CONFIG_BSEIP) += iic.o
-diff --git a/arch/ppc/boot/simple/misc.c b/arch/ppc/boot/simple/misc.c
-index e02de5b..f415d6c 100644
---- a/arch/ppc/boot/simple/misc.c
-+++ b/arch/ppc/boot/simple/misc.c
-@@ -23,7 +23,7 @@
- #include <asm/page.h>
- #include <asm/mmu.h>
- #include <asm/bootinfo.h>
--#ifdef CONFIG_44x
-+#ifdef CONFIG_4xx
- #include <asm/ibm4xx.h>
- #endif
- #include <asm/reg.h>
-@@ -88,6 +88,14 @@ get_mem_size(void)
- return 0;
- }
-
-+#if defined(CONFIG_40x)
-+#define PPC4xx_EMAC0_MR0 EMAC0_BASE
-+#endif
-+
-+#if defined(CONFIG_44x) && defined(PPC44x_EMAC0_MR0)
-+#define PPC4xx_EMAC0_MR0 PPC44x_EMAC0_MR0
-+#endif
-+
- struct bi_record *
- decompress_kernel(unsigned long load_addr, int num_words, unsigned long cksum)
- {
-@@ -103,13 +111,13 @@ decompress_kernel(unsigned long load_add
- com_port = serial_init(0, NULL);
- #endif
-
--#if defined(CONFIG_44x) && defined(PPC44x_EMAC0_MR0)
-+#if defined(PPC4xx_EMAC0_MR0)
- /* Reset MAL */
- mtdcr(DCRN_MALCR(DCRN_MAL_BASE), MALCR_MMSR);
- /* Wait for reset */
- while (mfdcr(DCRN_MALCR(DCRN_MAL_BASE)) & MALCR_MMSR) {};
- /* Reset EMAC */
-- *(volatile unsigned long *)PPC44x_EMAC0_MR0 = 0x20000000;
-+ *(volatile unsigned long *)PPC4xx_EMAC0_MR0 = 0x20000000;
- __asm__ __volatile__("eieio");
- #endif
-
-@@ -164,7 +172,9 @@ decompress_kernel(unsigned long load_add
- puts(" "); puthex((unsigned long)(&__ramdisk_end));puts("\n");
- }
-
-+#ifndef CONFIG_40x /* don't overwrite the 40x image located at 0x00400000! */
- avail_ram = (char *)0x00400000;
-+#endif
- end_avail = (char *)0x00800000;
- puts("avail ram: "); puthex((unsigned long)avail_ram); puts(" ");
- puthex((unsigned long)end_avail); puts("\n");
-diff --git a/arch/ppc/boot/simple/openbios.c b/arch/ppc/boot/simple/openbios.c
-index c732b6d..81f11d8 100644
---- a/arch/ppc/boot/simple/openbios.c
-+++ b/arch/ppc/boot/simple/openbios.c
-@@ -1,19 +1,43 @@
- /*
- * arch/ppc/boot/simple/openbios.c
- *
-- * 2005 (c) SYSGO AG - g.jaeger@sysgo.com
-+ * Copyright (c) 2005 DENX Software Engineering
-+ * Stefan Roese <sr@denx.de>
-+ *
-+ * Based on original work by
-+ * 2005 (c) SYSGO AG - g.jaeger@sysgo.com
-+ *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without
- * any warranty of any kind, whether express or implied.
- *
-- * Derived from arch/ppc/boot/simple/pibs.c (from MontaVista)
- */
-
- #include <linux/types.h>
- #include <linux/config.h>
- #include <linux/string.h>
- #include <asm/ppcboot.h>
--#include <platforms/4xx/ebony.h>
-+#include <asm/ibm4xx.h>
-+#include <asm/reg.h>
-+#ifdef CONFIG_40x
-+#include <asm/io.h>
-+#endif
-+
-+#if defined(CONFIG_BUBINGA)
-+#define BOARD_INFO_VECTOR 0xFFF80B50 /* openbios 1.19 moved this vector down - armin */
-+#else
-+#define BOARD_INFO_VECTOR 0xFFFE0B50
-+#endif
-+
-+#ifdef CONFIG_40x
-+/* Supply a default Ethernet address for those eval boards that don't
-+ * ship with one. This is an address from the MBX board I have, so
-+ * it is unlikely you will find it on your network.
-+ */
-+static ushort def_enet_addr[] = { 0x0800, 0x3e26, 0x1559 };
-+
-+extern unsigned long timebase_period_ns;
-+#endif /* CONFIG_40x */
-
- extern unsigned long decompress_kernel(unsigned long load_addr, int num_words,
- unsigned long cksum);
-@@ -23,15 +47,85 @@ extern unsigned long decompress_kernel(u
- bd_t hold_resid_buf __attribute__ ((__section__ (".data.boot")));
- bd_t *hold_residual = &hold_resid_buf;
-
-+typedef struct openbios_board_info {
-+ unsigned char bi_s_version[4]; /* Version of this structure */
-+ unsigned char bi_r_version[30]; /* Version of the IBM ROM */
-+ unsigned int bi_memsize; /* DRAM installed, in bytes */
-+#ifdef CONFIG_405EP
-+ unsigned char bi_enetaddr[2][6]; /* Local Ethernet MAC address */
-+#else /* CONFIG_405EP */
-+ unsigned char bi_enetaddr[6]; /* Local Ethernet MAC address */
-+#endif /* CONFIG_405EP */
-+ unsigned char bi_pci_enetaddr[6]; /* PCI Ethernet MAC address */
-+ unsigned int bi_intfreq; /* Processor speed, in Hz */
-+ unsigned int bi_busfreq; /* PLB Bus speed, in Hz */
-+ unsigned int bi_pci_busfreq; /* PCI Bus speed, in Hz */
-+#ifdef CONFIG_405EP
-+ unsigned int bi_opb_busfreq; /* OPB Bus speed, in Hz */
-+ unsigned int bi_pllouta_freq; /* PLL OUTA speed, in Hz */
-+#endif /* CONFIG_405EP */
-+} openbios_bd_t;
-+
- void *
- load_kernel(unsigned long load_addr, int num_words, unsigned long cksum,
- void *ign1, void *ign2)
- {
-- decompress_kernel(load_addr, num_words, cksum);
-+#ifdef CONFIG_40x
-+ openbios_bd_t *openbios_bd = NULL;
-+ openbios_bd_t *(*get_board_info)(void) =
-+ (openbios_bd_t *(*)(void))(*(unsigned long *)BOARD_INFO_VECTOR);
-+
-+ /*
-+ * On 40x platforms we not only need the MAC-addresses, but also the
-+ * clocks and memsize. Now try to get all values using the OpenBIOS
-+ * "get_board_info()" callback.
-+ */
-+ if ((openbios_bd = get_board_info()) != NULL) {
-+ /*
-+ * Copy bd_info from OpenBIOS struct into U-Boot struct
-+ * used by kernel
-+ */
-+ hold_residual->bi_memsize = openbios_bd->bi_memsize;
-+ hold_residual->bi_intfreq = openbios_bd->bi_intfreq;
-+ hold_residual->bi_busfreq = openbios_bd->bi_busfreq;
-+ hold_residual->bi_pci_busfreq = openbios_bd->bi_pci_busfreq;
-+ memcpy(hold_residual->bi_pci_enetaddr, openbios_bd->bi_pci_enetaddr, 6);
-+#ifdef CONFIG_405EP
-+ memcpy(hold_residual->bi_enetaddr, openbios_bd->bi_enetaddr[0], 6);
-+ memcpy(hold_residual->bi_enet1addr, openbios_bd->bi_enetaddr[1], 6);
-+ hold_residual->bi_opbfreq = openbios_bd->bi_opb_busfreq;
-+ hold_residual->bi_procfreq = openbios_bd->bi_pllouta_freq;
-+#else /* CONFIG_405EP */
-+ memcpy(hold_residual->bi_enetaddr, openbios_bd->bi_enetaddr, 6);
-+#endif /* CONFIG_405EP */
-+ } else {
-+ /* Hmmm...better try to stuff some defaults.
-+ */
-+ hold_residual->bi_memsize = 16 * 1024 * 1024;
-+ hold_residual->bi_intfreq = 200000000;
-+ hold_residual->bi_busfreq = 100000000;
-+ hold_residual->bi_pci_busfreq = 66666666;
-+
-+ /*
-+ * Only supply one mac-address in this fallback
-+ */
-+ memcpy(hold_residual->bi_enetaddr, (void *)def_enet_addr, 6);
-+#ifdef CONFIG_405EP
-+ hold_residual->bi_opbfreq = 50000000;
-+ hold_residual->bi_procfreq = 200000000;
-+#endif /* CONFIG_405EP */
-+ }
-+
-+ timebase_period_ns = 1000000000 / hold_residual->bi_intfreq;
-+#endif /* CONFIG_40x */
-
-+#ifdef CONFIG_440GP
- /* simply copy the MAC addresses */
-- memcpy(hold_residual->bi_enetaddr, (char *)EBONY_OPENBIOS_MAC_BASE, 6);
-- memcpy(hold_residual->bi_enet1addr, (char *)(EBONY_OPENBIOS_MAC_BASE+EBONY_OPENBIOS_MAC_OFFSET), 6);
-+ memcpy(hold_residual->bi_enetaddr, (char *)OPENBIOS_MAC_BASE, 6);
-+ memcpy(hold_residual->bi_enet1addr, (char *)(OPENBIOS_MAC_BASE+OPENBIOS_MAC_OFFSET), 6);
-+#endif /* CONFIG_440GP */
-+
-+ decompress_kernel(load_addr, num_words, cksum);
-
- return (void *)hold_residual;
- }
-diff --git a/arch/ppc/platforms/4xx/Kconfig b/arch/ppc/platforms/4xx/Kconfig
-index e70e4c6..d883791 100644
---- a/arch/ppc/platforms/4xx/Kconfig
-+++ b/arch/ppc/platforms/4xx/Kconfig
-@@ -225,7 +225,7 @@ config EMBEDDEDBOOT
-
- config IBM_OPENBIOS
- bool
-- depends on ASH || BUBINGA || REDWOOD_5 || REDWOOD_6 || SYCAMORE || WALNUT
-+ depends on ASH || REDWOOD_5 || REDWOOD_6
- default y
-
- config PPC4xx_DMA
-diff --git a/arch/ppc/platforms/4xx/bubinga.c b/arch/ppc/platforms/4xx/bubinga.c
-index 3678abf..8110f55 100644
---- a/arch/ppc/platforms/4xx/bubinga.c
-+++ b/arch/ppc/platforms/4xx/bubinga.c
-@@ -89,7 +89,7 @@ bubinga_early_serial_map(void)
- * by 16.
- */
- uart_div = (mfdcr(DCRN_CPC0_UCR_BASE) & DCRN_CPC0_UCR_U0DIV);
-- uart_clock = __res.bi_pllouta_freq / uart_div;
-+ uart_clock = __res.bi_procfreq / uart_div;
-
- /* Setup serial port access */
- memset(&port, 0, sizeof(port));
-diff --git a/arch/ppc/platforms/4xx/bubinga.h b/arch/ppc/platforms/4xx/bubinga.h
-index b1df856..b5380cf 100644
---- a/arch/ppc/platforms/4xx/bubinga.h
-+++ b/arch/ppc/platforms/4xx/bubinga.h
-@@ -1,52 +1,34 @@
- /*
-- * Support for IBM PPC 405EP evaluation board (Bubinga).
-+ * arch/ppc/platforms/4xx/bubinga.h
- *
-- * Author: SAW (IBM), derived from walnut.h.
-- * Maintained by MontaVista Software <source@mvista.com>
-+ * Bubinga board definitions
-+ *
-+ * Copyright (c) 2005 DENX Software Engineering
-+ * Stefan Roese <sr@denx.de>
-+ *
-+ * Based on original work by
-+ * SAW (IBM)
-+ * 2003 (c) MontaVista Softare Inc.
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
- *
-- * 2003 (c) MontaVista Softare Inc. This file is licensed under the
-- * terms of the GNU General Public License version 2. This program is
-- * licensed "as is" without any warranty of any kind, whether express
-- * or implied.
- */
-
- #ifdef __KERNEL__
- #ifndef __BUBINGA_H__
- #define __BUBINGA_H__
-
--/* 405EP */
-+#include <linux/config.h>
- #include <platforms/4xx/ibm405ep.h>
--
--#ifndef __ASSEMBLY__
--/*
-- * Data structure defining board information maintained by the boot
-- * ROM on IBM's evaluation board. An effort has been made to
-- * keep the field names consistent with the 8xx 'bd_t' board info
-- * structures.
-- */
--
--typedef struct board_info {
-- unsigned char bi_s_version[4]; /* Version of this structure */
-- unsigned char bi_r_version[30]; /* Version of the IBM ROM */
-- unsigned int bi_memsize; /* DRAM installed, in bytes */
-- unsigned char bi_enetaddr[2][6]; /* Local Ethernet MAC address */ unsigned char bi_pci_enetaddr[6]; /* PCI Ethernet MAC address */
-- unsigned int bi_intfreq; /* Processor speed, in Hz */
-- unsigned int bi_busfreq; /* PLB Bus speed, in Hz */
-- unsigned int bi_pci_busfreq; /* PCI Bus speed, in Hz */
-- unsigned int bi_opb_busfreq; /* OPB Bus speed, in Hz */
-- unsigned int bi_pllouta_freq; /* PLL OUTA speed, in Hz */
--} bd_t;
--
--/* Some 4xx parts use a different timebase frequency from the internal clock.
--*/
--#define bi_tbfreq bi_intfreq
--
-+#include <asm/ppcboot.h>
-
- /* Memory map for the Bubinga board.
- * Generic 4xx plus RTC.
- */
-
--extern void *bubinga_rtc_base;
- #define BUBINGA_RTC_PADDR ((uint)0xf0000000)
- #define BUBINGA_RTC_VADDR BUBINGA_RTC_PADDR
- #define BUBINGA_RTC_SIZE ((uint)8*1024)
-@@ -58,12 +40,18 @@ extern void *bubinga_rtc_base;
- * for typical configurations at various CPU speeds.
- * The base baud is calculated as (FWDA / EXT UART DIV / 16)
- */
--#define BASE_BAUD 0
-+#define BASE_BAUD 0
-
--#define BUBINGA_FPGA_BASE 0xF0300000
-+/* Flash */
-+#define PPC40x_FPGA_BASE 0xF0300000
-+#define PPC40x_FPGA_REG_OFFS 1 /* offset to flash map reg */
-+#define PPC40x_FLASH_ONBD_N(x) (x & 0x02)
-+#define PPC40x_FLASH_SRAM_SEL(x) (x & 0x01)
-+#define PPC40x_FLASH_LOW 0xFFF00000
-+#define PPC40x_FLASH_HIGH 0xFFF80000
-+#define PPC40x_FLASH_SIZE 0x80000
-
--#define PPC4xx_MACHINE_NAME "IBM Bubinga"
-+#define PPC4xx_MACHINE_NAME "IBM Bubinga"
-
--#endif /* !__ASSEMBLY__ */
- #endif /* __BUBINGA_H__ */
- #endif /* __KERNEL__ */
-diff --git a/arch/ppc/platforms/4xx/ebony.h b/arch/ppc/platforms/4xx/ebony.h
-index d08faa4..b91ad42 100644
---- a/arch/ppc/platforms/4xx/ebony.h
-+++ b/arch/ppc/platforms/4xx/ebony.h
-@@ -24,8 +24,8 @@
- #define PPC44x_EMAC0_MR0 0xE0000800
-
- /* Where to find the MAC info */
--#define EBONY_OPENBIOS_MAC_BASE 0xfffffe0c
--#define EBONY_OPENBIOS_MAC_OFFSET 0x0c
-+#define OPENBIOS_MAC_BASE 0xfffffe0c
-+#define OPENBIOS_MAC_OFFSET 0x0c
-
- /* Default clock rates for Rev. B and Rev. C silicon */
- #define EBONY_440GP_RB_SYSCLK 33000000
-diff --git a/arch/ppc/platforms/4xx/sycamore.c b/arch/ppc/platforms/4xx/sycamore.c
-index d8019ee..281b4a2 100644
---- a/arch/ppc/platforms/4xx/sycamore.c
-+++ b/arch/ppc/platforms/4xx/sycamore.c
-@@ -88,9 +88,6 @@ ppc405_map_irq(struct pci_dev *dev, unsi
- void __init
- sycamore_setup_arch(void)
- {
--#define SYCAMORE_PS2_BASE 0xF0100000
--#define SYCAMORE_FPGA_BASE 0xF0300000
--
- void *fpga_brdc;
- unsigned char fpga_brdc_data;
- void *fpga_enable;
-@@ -100,7 +97,7 @@ sycamore_setup_arch(void)
-
- ppc4xx_setup_arch();
-
-- ibm_ocp_set_emac(0, 1);
-+ ibm_ocp_set_emac(0, 0);
-
- kb_data = ioremap(SYCAMORE_PS2_BASE, 8);
- if (!kb_data) {
-@@ -111,7 +108,7 @@ sycamore_setup_arch(void)
-
- kb_cs = kb_data + 1;
-
-- fpga_status = ioremap(SYCAMORE_FPGA_BASE, 8);
-+ fpga_status = ioremap(PPC40x_FPGA_BASE, 8);
- if (!fpga_status) {
- printk(KERN_CRIT
- "sycamore_setup_arch() fpga_status ioremap failed\n");
-diff --git a/arch/ppc/platforms/4xx/sycamore.h b/arch/ppc/platforms/4xx/sycamore.h
-index 3e7b4e2..1cd6c82 100644
---- a/arch/ppc/platforms/4xx/sycamore.h
-+++ b/arch/ppc/platforms/4xx/sycamore.h
-@@ -1,67 +1,52 @@
- /*
- * arch/ppc/platforms/4xx/sycamore.h
- *
-- * Macros, definitions, and data structures specific to the IBM PowerPC
-- * 405GPr "Sycamore" evaluation board.
-+ * Sycamore board definitions
- *
-- * Author: Armin Kuster <akuster@mvista.com>
-+ * Copyright (c) 2005 DENX Software Engineering
-+ * Stefan Roese <sr@denx.de>
-+ *
-+ * Based on original work by
-+ * Armin Kuster <akuster@mvista.com>
-+ * 2000 (c) MontaVista, Software, Inc.
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
- *
-- * 2000 (c) MontaVista, Software, Inc. This file is licensed under
-- * the terms of the GNU General Public License version 2. This program
-- * is licensed "as is" without any warranty of any kind, whether express
-- * or implied.
- */
-
- #ifdef __KERNEL__
- #ifndef __ASM_SYCAMORE_H__
- #define __ASM_SYCAMORE_H__
-
-+#include <linux/config.h>
- #include <platforms/4xx/ibm405gpr.h>
-+#include <asm/ppcboot.h>
-
--#ifndef __ASSEMBLY__
--/*
-- * Data structure defining board information maintained by the boot
-- * ROM on IBM's "Sycamore" evaluation board. An effort has been made to
-- * keep the field names consistent with the 8xx 'bd_t' board info
-- * structures.
-- */
--
--typedef struct board_info {
-- unsigned char bi_s_version[4]; /* Version of this structure */
-- unsigned char bi_r_version[30]; /* Version of the IBM ROM */
-- unsigned int bi_memsize; /* DRAM installed, in bytes */
-- unsigned char bi_enetaddr[6]; /* Local Ethernet MAC address */
-- unsigned char bi_pci_enetaddr[6]; /* PCI Ethernet MAC address */
-- unsigned int bi_intfreq; /* Processor speed, in Hz */
-- unsigned int bi_busfreq; /* PLB Bus speed, in Hz */
-- unsigned int bi_pci_busfreq; /* PCI Bus speed, in Hz */
--} bd_t;
--
--/* Some 4xx parts use a different timebase frequency from the internal clock.
--*/
--#define bi_tbfreq bi_intfreq
--
--
--/* Memory map for the IBM "Sycamore" 405GP evaluation board.
-+/* Memory map for the IBM "Sycamore" 405GPr evaluation board.
- * Generic 4xx plus RTC.
- */
-
--extern void *sycamore_rtc_base;
- #define SYCAMORE_RTC_PADDR ((uint)0xf0000000)
- #define SYCAMORE_RTC_VADDR SYCAMORE_RTC_PADDR
--#define SYCAMORE_RTC_SIZE ((uint)8*1024)
-+#define SYCAMORE_RTC_SIZE ((uint)8*1024)
-
--#ifdef CONFIG_PPC405GP_INTERNAL_CLOCK
--#define BASE_BAUD 201600
--#else
- #define BASE_BAUD 691200
--#endif
-
--#define SYCAMORE_PS2_BASE 0xF0100000
--#define SYCAMORE_FPGA_BASE 0xF0300000
-+#define SYCAMORE_PS2_BASE 0xF0100000
-+
-+/* Flash */
-+#define PPC40x_FPGA_BASE 0xF0300000
-+#define PPC40x_FPGA_REG_OFFS 5 /* offset to flash map reg */
-+#define PPC40x_FLASH_ONBD_N(x) (x & 0x02)
-+#define PPC40x_FLASH_SRAM_SEL(x) (x & 0x01)
-+#define PPC40x_FLASH_LOW 0xFFF00000
-+#define PPC40x_FLASH_HIGH 0xFFF80000
-+#define PPC40x_FLASH_SIZE 0x80000
-
- #define PPC4xx_MACHINE_NAME "IBM Sycamore"
-
--#endif /* !__ASSEMBLY__ */
- #endif /* __ASM_SYCAMORE_H__ */
- #endif /* __KERNEL__ */
-diff --git a/arch/ppc/platforms/4xx/walnut.c b/arch/ppc/platforms/4xx/walnut.c
-index a33eda4..74cb331 100644
---- a/arch/ppc/platforms/4xx/walnut.c
-+++ b/arch/ppc/platforms/4xx/walnut.c
-@@ -90,7 +90,7 @@ walnut_setup_arch(void)
-
- kb_cs = kb_data + 1;
-
-- fpga_status = ioremap(WALNUT_FPGA_BASE, 8);
-+ fpga_status = ioremap(PPC40x_FPGA_BASE, 8);
- if (!fpga_status) {
- printk(KERN_CRIT
- "walnut_setup_arch() fpga_status ioremap failed\n");
-diff --git a/arch/ppc/platforms/4xx/walnut.h b/arch/ppc/platforms/4xx/walnut.h
-index 04cfbf3..dcf2691 100644
---- a/arch/ppc/platforms/4xx/walnut.h
-+++ b/arch/ppc/platforms/4xx/walnut.h
-@@ -1,72 +1,55 @@
- /*
- * arch/ppc/platforms/4xx/walnut.h
- *
-- * Macros, definitions, and data structures specific to the IBM PowerPC
-- * 405GP "Walnut" evaluation board.
-+ * Walnut board definitions
- *
-- * Authors: Grant Erickson <grant@lcse.umn.edu>, Frank Rowand
-- * <frank_rowand@mvista.com>, Debbie Chu <debbie_chu@mvista.com> or
-- * source@mvista.com
-+ * Copyright (c) 2005 DENX Software Engineering
-+ * Stefan Roese <sr@denx.de>
- *
-- * Copyright (c) 1999 Grant Erickson <grant@lcse.umn.edu>
-+ * Based on original work by
-+ * Copyright (c) 1999 Grant Erickson <grant@lcse.umn.edu>
-+ * Frank Rowand <frank_rowand@mvista.com>
-+ * Debbie Chu <debbie_chu@mvista.com>
-+ * 2000 (c) MontaVista, Software, Inc.
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
- *
-- * 2000 (c) MontaVista, Software, Inc. This file is licensed under
-- * the terms of the GNU General Public License version 2. This program
-- * is licensed "as is" without any warranty of any kind, whether express
-- * or implied.
- */
-
- #ifdef __KERNEL__
- #ifndef __ASM_WALNUT_H__
- #define __ASM_WALNUT_H__
-
--/* We have a 405GP core */
-+#include <linux/config.h>
- #include <platforms/4xx/ibm405gp.h>
--
--#ifndef __ASSEMBLY__
--/*
-- * Data structure defining board information maintained by the boot
-- * ROM on IBM's "Walnut" evaluation board. An effort has been made to
-- * keep the field names consistent with the 8xx 'bd_t' board info
-- * structures.
-- */
--
--typedef struct board_info {
-- unsigned char bi_s_version[4]; /* Version of this structure */
-- unsigned char bi_r_version[30]; /* Version of the IBM ROM */
-- unsigned int bi_memsize; /* DRAM installed, in bytes */
-- unsigned char bi_enetaddr[6]; /* Local Ethernet MAC address */
-- unsigned char bi_pci_enetaddr[6]; /* PCI Ethernet MAC address */
-- unsigned int bi_intfreq; /* Processor speed, in Hz */
-- unsigned int bi_busfreq; /* PLB Bus speed, in Hz */
-- unsigned int bi_pci_busfreq; /* PCI Bus speed, in Hz */
--} bd_t;
--
--/* Some 4xx parts use a different timebase frequency from the internal clock.
--*/
--#define bi_tbfreq bi_intfreq
--
-+#include <asm/ppcboot.h>
-
- /* Memory map for the IBM "Walnut" 405GP evaluation board.
- * Generic 4xx plus RTC.
- */
-
--extern void *walnut_rtc_base;
- #define WALNUT_RTC_PADDR ((uint)0xf0000000)
- #define WALNUT_RTC_VADDR WALNUT_RTC_PADDR
- #define WALNUT_RTC_SIZE ((uint)8*1024)
-
--#ifdef CONFIG_PPC405GP_INTERNAL_CLOCK
--#define BASE_BAUD 201600
--#else
- #define BASE_BAUD 691200
--#endif
-
- #define WALNUT_PS2_BASE 0xF0100000
--#define WALNUT_FPGA_BASE 0xF0300000
-+
-+/* Flash */
-+#define PPC40x_FPGA_BASE 0xF0300000
-+#define PPC40x_FPGA_REG_OFFS 5 /* offset to flash map reg */
-+#define PPC40x_FLASH_ONBD_N(x) (x & 0x02)
-+#define PPC40x_FLASH_SRAM_SEL(x) (x & 0x01)
-+#define PPC40x_FLASH_LOW 0xFFF00000
-+#define PPC40x_FLASH_HIGH 0xFFF80000
-+#define PPC40x_FLASH_SIZE 0x80000
-+#define WALNUT_FPGA_BASE PPC40x_FPGA_BASE
-
- #define PPC4xx_MACHINE_NAME "IBM Walnut"
-
--#endif /* !__ASSEMBLY__ */
- #endif /* __ASM_WALNUT_H__ */
- #endif /* __KERNEL__ */
-diff --git a/include/asm-ppc/ibm_ocp.h b/include/asm-ppc/ibm_ocp.h
-index 6f10a25..9c21de1 100644
---- a/include/asm-ppc/ibm_ocp.h
-+++ b/include/asm-ppc/ibm_ocp.h
-@@ -131,9 +131,22 @@ static inline void ibm_ocp_set_emac(int
- /* Copy MAC addresses to EMAC additions */
- for (i=start; i<=end; i++) {
- def = ocp_get_one_device(OCP_VENDOR_IBM, OCP_FUNC_EMAC, i);
-- memcpy(((struct ocp_func_emac_data *)def->additions)->mac_addr,
-- &__res.bi_enetaddr[i],
-- 6);
-+ if (i == 0)
-+ memcpy(((struct ocp_func_emac_data *)def->additions)->mac_addr,
-+ __res.bi_enetaddr, 6);
-+#if defined(CONFIG_405EP) || defined(CONFIG_44x)
-+ else if (i == 1)
-+ memcpy(((struct ocp_func_emac_data *)def->additions)->mac_addr,
-+ __res.bi_enet1addr, 6);
-+#endif
-+#if defined(CONFIG_440GX)
-+ else if (i == 2)
-+ memcpy(((struct ocp_func_emac_data *)def->additions)->mac_addr,
-+ __res.bi_enet2addr, 6);
-+ else if (i == 3)
-+ memcpy(((struct ocp_func_emac_data *)def->additions)->mac_addr,
-+ __res.bi_enet3addr, 6);
-+#endif
- }
- }
- #endif
-diff --git a/include/asm-ppc/ppcboot.h b/include/asm-ppc/ppcboot.h
-index fe24e45..6b7b63f 100644
---- a/include/asm-ppc/ppcboot.h
-+++ b/include/asm-ppc/ppcboot.h
-@@ -73,8 +73,8 @@ typedef struct bd_info {
- #if defined(CONFIG_HYMOD)
- hymod_conf_t bi_hymod_conf; /* hymod configuration information */
- #endif
--#if defined(CONFIG_EVB64260) || defined(CONFIG_44x) || defined(CONFIG_85xx) ||\
-- defined(CONFIG_83xx)
-+#if defined(CONFIG_EVB64260) || defined(CONFIG_405EP) || defined(CONFIG_44x) || \
-+ defined(CONFIG_85xx) || defined(CONFIG_83xx)
- /* second onboard ethernet port */
- unsigned char bi_enet1addr[6];
- #endif
-@@ -96,5 +96,7 @@ typedef struct bd_info {
- #endif
- } bd_t;
-
-+#define bi_tbfreq bi_intfreq
-+
- #endif /* __ASSEMBLY__ */
- #endif /* __ASM_PPCBOOT_H__ */
diff --git a/packages/linux/linux-dht-walnut-2.6.12/.mtn2git_empty b/packages/linux/linux-dht-walnut-2.6.12/.mtn2git_empty deleted file mode 100644 index e69de29bb2..0000000000 --- a/packages/linux/linux-dht-walnut-2.6.12/.mtn2git_empty +++ /dev/null diff --git a/packages/linux/linux-dht-walnut-2.6.12/dht-walnut_defconfig b/packages/linux/linux-dht-walnut-2.6.12/dht-walnut_defconfig deleted file mode 100644 index 3cd0837ceb..0000000000 --- a/packages/linux/linux-dht-walnut-2.6.12/dht-walnut_defconfig +++ /dev/null @@ -1,1963 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.12 -# Sat May 13 19:38:16 2006 -# -CONFIG_MMU=y -CONFIG_GENERIC_HARDIRQS=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_HAVE_DEC_LOCK=y -CONFIG_PPC=y -CONFIG_PPC32=y -CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# -CONFIG_LOCALVERSION="" -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -CONFIG_POSIX_MQUEUE=y -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -# CONFIG_AUDIT is not set -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_EMBEDDED=y -CONFIG_KALLSYMS=y -CONFIG_KALLSYMS_EXTRA_PASS=y -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -# CONFIG_EPOLL is not set -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y - -# -# Processor -# -# CONFIG_6xx is not set -CONFIG_40x=y -# CONFIG_44x is not set -# CONFIG_POWER3 is not set -# CONFIG_POWER4 is not set -# CONFIG_8xx is not set -# CONFIG_E500 is not set -CONFIG_MATH_EMULATION=y -# CONFIG_CPU_FREQ is not set -CONFIG_4xx=y - -# -# IBM 4xx options -# -# CONFIG_ASH is not set -# CONFIG_BUBINGA is not set -# CONFIG_CPCI405 is not set -# CONFIG_EP405 is not set -# CONFIG_OAK is not set -# CONFIG_REDWOOD_5 is not set -# CONFIG_REDWOOD_6 is not set -# CONFIG_SYCAMORE is not set -CONFIG_WALNUT=y -# CONFIG_XILINX_ML300 is not set -CONFIG_IBM405_ERR77=y -CONFIG_IBM405_ERR51=y -CONFIG_IBM_OCP=y -CONFIG_BIOS_FIXUP=y -CONFIG_405GP=y -# CONFIG_PPC4xx_DMA is not set -CONFIG_PPC_GEN550=y -# CONFIG_PM is not set -CONFIG_UART0_TTYS0=y -# CONFIG_UART0_TTYS1 is not set -CONFIG_NOT_COHERENT_CACHE=y - -# -# Platform options -# -# CONFIG_PC_KEYBOARD is not set -# CONFIG_SMP is not set -# CONFIG_PREEMPT is not set -# CONFIG_HIGHMEM is not set -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set -CONFIG_CMDLINE_BOOL=y -CONFIG_CMDLINE="ip=on" -CONFIG_ISA_DMA_API=y - -# -# Bus options -# -CONFIG_PCI=y -CONFIG_PCI_DOMAINS=y -CONFIG_PCI_LEGACY_PROC=y -# CONFIG_PCI_NAMES is not set - -# -# PCCARD (PCMCIA/CardBus) support -# -CONFIG_PCCARD=y -# CONFIG_PCMCIA_DEBUG is not set -CONFIG_PCMCIA=y -CONFIG_CARDBUS=y - -# -# PC-card bridges -# -CONFIG_YENTA=m -CONFIG_PD6729=m -CONFIG_I82092=m -CONFIG_TCIC=m -CONFIG_PCCARD_NONSTATIC=m - -# -# Advanced setup -# -# CONFIG_ADVANCED_OPTIONS is not set - -# -# Default settings for advanced configuration options are used -# -CONFIG_HIGHMEM_START=0xfe000000 -CONFIG_LOWMEM_SIZE=0x30000000 -CONFIG_KERNEL_START=0xc0000000 -CONFIG_TASK_SIZE=0x80000000 -CONFIG_CONSISTENT_START=0xff100000 -CONFIG_CONSISTENT_SIZE=0x00200000 -CONFIG_BOOT_LOAD=0x00400000 - -# -# Device Drivers -# - -# -# Generic Driver Options -# -# CONFIG_STANDALONE is not set -CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=m - -# -# Memory Technology Devices (MTD) -# -CONFIG_MTD=m -# CONFIG_MTD_DEBUG is not set -CONFIG_MTD_CONCAT=m -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_REDBOOT_PARTS=m -CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 -# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set -# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set -# CONFIG_MTD_CMDLINE_PARTS is not set - -# -# User Modules And Translation Layers -# -CONFIG_MTD_CHAR=m -CONFIG_MTD_BLOCK=m -CONFIG_MTD_BLOCK_RO=m -CONFIG_FTL=m -CONFIG_NFTL=m -# CONFIG_NFTL_RW is not set -CONFIG_INFTL=m - -# -# RAM/ROM/Flash chip drivers -# -CONFIG_MTD_CFI=m -CONFIG_MTD_JEDECPROBE=m -CONFIG_MTD_GEN_PROBE=m -# CONFIG_MTD_CFI_ADV_OPTIONS is not set -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -CONFIG_MTD_CFI_INTELEXT=m -CONFIG_MTD_CFI_AMDSTD=m -CONFIG_MTD_CFI_AMDSTD_RETRY=0 -CONFIG_MTD_CFI_STAA=m -CONFIG_MTD_CFI_UTIL=m -CONFIG_MTD_RAM=m -CONFIG_MTD_ROM=m -CONFIG_MTD_ABSENT=m -# CONFIG_MTD_XIP is not set - -# -# Mapping drivers for chip access -# -CONFIG_MTD_COMPLEX_MAPPINGS=y -CONFIG_MTD_PHYSMAP=m -CONFIG_MTD_PHYSMAP_START=0x8000000 -CONFIG_MTD_PHYSMAP_LEN=0x4000000 -CONFIG_MTD_PHYSMAP_BANKWIDTH=2 -CONFIG_MTD_WALNUT=m -CONFIG_MTD_PCI=m - -# -# Self-contained MTD device drivers -# -CONFIG_MTD_PMC551=m -CONFIG_MTD_PMC551_BUGFIX=y -# CONFIG_MTD_PMC551_DEBUG is not set -CONFIG_MTD_SLRAM=m -CONFIG_MTD_PHRAM=m -# CONFIG_MTD_MTDRAM is not set -CONFIG_MTD_BLKMTD=m -# CONFIG_MTD_BLOCK2MTD is not set - -# -# Disk-On-Chip Device Drivers -# -CONFIG_MTD_DOC2000=m -CONFIG_MTD_DOC2001=m -CONFIG_MTD_DOC2001PLUS=m -CONFIG_MTD_DOCPROBE=m -CONFIG_MTD_DOCECC=m -# CONFIG_MTD_DOCPROBE_ADVANCED is not set -CONFIG_MTD_DOCPROBE_ADDRESS=0 - -# -# NAND Flash Device Drivers -# -CONFIG_MTD_NAND=m -# CONFIG_MTD_NAND_VERIFY_WRITE is not set -CONFIG_MTD_NAND_IDS=m -CONFIG_MTD_NAND_DISKONCHIP=m -# CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED is not set -CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0 -# CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE is not set -# CONFIG_MTD_NAND_NANDSIM is not set - -# -# Parallel port support -# -CONFIG_PARPORT=m -CONFIG_PARPORT_PC=m -# CONFIG_PARPORT_SERIAL is not set -# CONFIG_PARPORT_PC_FIFO is not set -# CONFIG_PARPORT_PC_SUPERIO is not set -# CONFIG_PARPORT_PC_PCMCIA is not set -# CONFIG_PARPORT_GSC is not set -# CONFIG_PARPORT_1284 is not set - -# -# Plug and Play support -# - -# -# Block devices -# -CONFIG_BLK_DEV_FD=m -CONFIG_PARIDE=m -CONFIG_PARIDE_PARPORT=m - -# -# Parallel IDE high-level drivers -# -CONFIG_PARIDE_PD=m -CONFIG_PARIDE_PCD=m -CONFIG_PARIDE_PF=m -CONFIG_PARIDE_PT=m -CONFIG_PARIDE_PG=m - -# -# Parallel IDE protocol modules -# -CONFIG_PARIDE_ATEN=m -CONFIG_PARIDE_BPCK=m -CONFIG_PARIDE_BPCK6=m -CONFIG_PARIDE_COMM=m -CONFIG_PARIDE_DSTR=m -CONFIG_PARIDE_FIT2=m -CONFIG_PARIDE_FIT3=m -CONFIG_PARIDE_EPAT=m -# CONFIG_PARIDE_EPATC8 is not set -CONFIG_PARIDE_EPIA=m -CONFIG_PARIDE_FRIQ=m -CONFIG_PARIDE_FRPW=m -CONFIG_PARIDE_KBIC=m -CONFIG_PARIDE_KTTI=m -CONFIG_PARIDE_ON20=m -CONFIG_PARIDE_ON26=m -CONFIG_BLK_CPQ_DA=m -CONFIG_BLK_CPQ_CISS_DA=m -# CONFIG_CISS_SCSI_TAPE is not set -CONFIG_BLK_DEV_DAC960=m -CONFIG_BLK_DEV_UMEM=m -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_CRYPTOLOOP=m -CONFIG_BLK_DEV_NBD=m -CONFIG_BLK_DEV_SX8=m -CONFIG_BLK_DEV_UB=m -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" -# CONFIG_LBD is not set -CONFIG_CDROM_PKTCDVD=m -CONFIG_CDROM_PKTCDVD_BUFFERS=8 -# CONFIG_CDROM_PKTCDVD_WCACHE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -CONFIG_ATA_OVER_ETH=m - -# -# ATA/ATAPI/MFM/RLL support -# -CONFIG_IDE=y -CONFIG_BLK_DEV_IDE=y - -# -# Please see Documentation/ide.txt for help/info on IDE drives -# -# CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set -CONFIG_BLK_DEV_IDECS=m -CONFIG_BLK_DEV_IDECD=y -CONFIG_BLK_DEV_IDETAPE=m -CONFIG_BLK_DEV_IDEFLOPPY=m -CONFIG_BLK_DEV_IDESCSI=m -# CONFIG_IDE_TASK_IOCTL is not set - -# -# IDE chipset support/bugfixes -# -CONFIG_IDE_GENERIC=y -CONFIG_BLK_DEV_IDEPCI=y -# CONFIG_IDEPCI_SHARE_IRQ is not set -CONFIG_BLK_DEV_OFFBOARD=y -CONFIG_BLK_DEV_GENERIC=y -CONFIG_BLK_DEV_OPTI621=m -CONFIG_BLK_DEV_SL82C105=m -CONFIG_BLK_DEV_IDEDMA_PCI=y -# CONFIG_BLK_DEV_IDEDMA_FORCED is not set -CONFIG_IDEDMA_PCI_AUTO=y -# CONFIG_IDEDMA_ONLYDISK is not set -CONFIG_BLK_DEV_AEC62XX=m -CONFIG_BLK_DEV_ALI15X3=m -# CONFIG_WDC_ALI15X3 is not set -CONFIG_BLK_DEV_AMD74XX=m -CONFIG_BLK_DEV_CMD64X=m -CONFIG_BLK_DEV_TRIFLEX=m -CONFIG_BLK_DEV_CY82C693=m -CONFIG_BLK_DEV_CS5520=m -CONFIG_BLK_DEV_CS5530=m -CONFIG_BLK_DEV_HPT34X=m -# CONFIG_HPT34X_AUTODMA is not set -CONFIG_BLK_DEV_HPT366=m -CONFIG_BLK_DEV_SC1200=m -CONFIG_BLK_DEV_PIIX=m -CONFIG_BLK_DEV_NS87415=m -CONFIG_BLK_DEV_PDC202XX_OLD=y -# CONFIG_PDC202XX_BURST is not set -CONFIG_BLK_DEV_PDC202XX_NEW=m -# CONFIG_PDC202XX_FORCE is not set -CONFIG_BLK_DEV_SVWKS=m -CONFIG_BLK_DEV_SIIMAGE=m -CONFIG_BLK_DEV_SLC90E66=m -CONFIG_BLK_DEV_TRM290=m -CONFIG_BLK_DEV_VIA82CXXX=m -# CONFIG_IDE_ARM is not set -CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_IDEDMA_IVB is not set -CONFIG_IDEDMA_AUTO=y -# CONFIG_BLK_DEV_HD is not set - -# -# SCSI device support -# -CONFIG_SCSI=y -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=y -# CONFIG_CHR_DEV_ST is not set -# CONFIG_CHR_DEV_OSST is not set -CONFIG_BLK_DEV_SR=y -# CONFIG_BLK_DEV_SR_VENDOR is not set -CONFIG_CHR_DEV_SG=y - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -CONFIG_SCSI_MULTI_LUN=y -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_LOGGING is not set - -# -# SCSI Transport Attributes -# -CONFIG_SCSI_SPI_ATTRS=m -CONFIG_SCSI_FC_ATTRS=m -# CONFIG_SCSI_ISCSI_ATTRS is not set - -# -# SCSI low-level drivers -# -CONFIG_BLK_DEV_3W_XXXX_RAID=m -CONFIG_SCSI_3W_9XXX=m -CONFIG_SCSI_ACARD=m -CONFIG_SCSI_AACRAID=m -CONFIG_SCSI_AIC7XXX=m -CONFIG_AIC7XXX_CMDS_PER_DEVICE=32 -CONFIG_AIC7XXX_RESET_DELAY_MS=15000 -CONFIG_AIC7XXX_DEBUG_ENABLE=y -CONFIG_AIC7XXX_DEBUG_MASK=0 -CONFIG_AIC7XXX_REG_PRETTY_PRINT=y -CONFIG_SCSI_AIC7XXX_OLD=m -CONFIG_SCSI_AIC79XX=m -CONFIG_AIC79XX_CMDS_PER_DEVICE=32 -CONFIG_AIC79XX_RESET_DELAY_MS=15000 -# CONFIG_AIC79XX_ENABLE_RD_STRM is not set -CONFIG_AIC79XX_DEBUG_ENABLE=y -CONFIG_AIC79XX_DEBUG_MASK=0 -CONFIG_AIC79XX_REG_PRETTY_PRINT=y -CONFIG_SCSI_DPT_I2O=m -# CONFIG_MEGARAID_NEWGEN is not set -CONFIG_MEGARAID_LEGACY=m -# CONFIG_SCSI_SATA is not set -CONFIG_SCSI_BUSLOGIC=m -# CONFIG_SCSI_OMIT_FLASHPOINT is not set -CONFIG_SCSI_DMX3191D=m -CONFIG_SCSI_EATA=m -# CONFIG_SCSI_EATA_TAGGED_QUEUE is not set -# CONFIG_SCSI_EATA_LINKED_COMMANDS is not set -CONFIG_SCSI_EATA_MAX_TAGS=16 -# CONFIG_SCSI_FUTURE_DOMAIN is not set -CONFIG_SCSI_GDTH=m -CONFIG_SCSI_IPS=m -CONFIG_SCSI_INITIO=m -CONFIG_SCSI_INIA100=m -CONFIG_SCSI_PPA=m -CONFIG_SCSI_IMM=m -# CONFIG_SCSI_IZIP_EPP16 is not set -# CONFIG_SCSI_IZIP_SLOW_CTR is not set -CONFIG_SCSI_SYM53C8XX_2=m -CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1 -CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 -CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 -# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set -CONFIG_SCSI_IPR=m -# CONFIG_SCSI_IPR_TRACE is not set -# CONFIG_SCSI_IPR_DUMP is not set -CONFIG_SCSI_QLOGIC_FC=m -# CONFIG_SCSI_QLOGIC_FC_FIRMWARE is not set -CONFIG_SCSI_QLOGIC_1280=m -# CONFIG_SCSI_QLOGIC_1280_1040 is not set -CONFIG_SCSI_QLA2XXX=y -CONFIG_SCSI_QLA21XX=m -CONFIG_SCSI_QLA22XX=m -CONFIG_SCSI_QLA2300=m -CONFIG_SCSI_QLA2322=m -CONFIG_SCSI_QLA6312=m -CONFIG_SCSI_LPFC=m -CONFIG_SCSI_DC395x=m -CONFIG_SCSI_DC390T=m -CONFIG_SCSI_NSP32=m -CONFIG_SCSI_DEBUG=m - -# -# PCMCIA SCSI adapter support -# -CONFIG_PCMCIA_AHA152X=m -CONFIG_PCMCIA_FDOMAIN=m -CONFIG_PCMCIA_NINJA_SCSI=m -CONFIG_PCMCIA_QLOGIC=m -CONFIG_PCMCIA_SYM53C500=m - -# -# Multi-device support (RAID and LVM) -# -CONFIG_MD=y -CONFIG_BLK_DEV_MD=m -CONFIG_MD_LINEAR=m -CONFIG_MD_RAID0=m -CONFIG_MD_RAID1=m -CONFIG_MD_RAID10=m -CONFIG_MD_RAID5=m -CONFIG_MD_RAID6=m -CONFIG_MD_MULTIPATH=m -CONFIG_MD_FAULTY=m -CONFIG_BLK_DEV_DM=m -CONFIG_DM_CRYPT=m -CONFIG_DM_SNAPSHOT=m -CONFIG_DM_MIRROR=m -CONFIG_DM_ZERO=m -CONFIG_DM_MULTIPATH=m -CONFIG_DM_MULTIPATH_EMC=m - -# -# Fusion MPT device support -# -CONFIG_FUSION=m -CONFIG_FUSION_MAX_SGE=40 -CONFIG_FUSION_CTL=m - -# -# IEEE 1394 (FireWire) support -# -CONFIG_IEEE1394=m - -# -# Subsystem Options -# -# CONFIG_IEEE1394_VERBOSEDEBUG is not set -# CONFIG_IEEE1394_OUI_DB is not set -CONFIG_IEEE1394_EXTRA_CONFIG_ROMS=y -CONFIG_IEEE1394_CONFIG_ROM_IP1394=y - -# -# Device Drivers -# -CONFIG_IEEE1394_PCILYNX=m -CONFIG_IEEE1394_OHCI1394=m - -# -# Protocol Drivers -# -CONFIG_IEEE1394_VIDEO1394=m -CONFIG_IEEE1394_SBP2=m -CONFIG_IEEE1394_SBP2_PHYS_DMA=y -CONFIG_IEEE1394_ETH1394=m -CONFIG_IEEE1394_DV1394=m -CONFIG_IEEE1394_RAWIO=m -CONFIG_IEEE1394_CMP=m -CONFIG_IEEE1394_AMDTP=m - -# -# I2O device support -# -# CONFIG_I2O is not set - -# -# Macintosh device drivers -# - -# -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_ADVANCED_ROUTER=y -CONFIG_IP_MULTIPLE_TABLES=y -# CONFIG_IP_ROUTE_FWMARK is not set -CONFIG_IP_ROUTE_MULTIPATH=y -# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set -CONFIG_IP_ROUTE_VERBOSE=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -CONFIG_IP_PNP_RARP=y -CONFIG_NET_IPIP=m -CONFIG_NET_IPGRE=m -CONFIG_NET_IPGRE_BROADCAST=y -CONFIG_IP_MROUTE=y -# CONFIG_IP_PIMSM_V1 is not set -# CONFIG_IP_PIMSM_V2 is not set -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -CONFIG_INET_AH=m -CONFIG_INET_ESP=m -CONFIG_INET_IPCOMP=m -CONFIG_INET_TUNNEL=m -CONFIG_IP_TCPDIAG=y -# CONFIG_IP_TCPDIAG_IPV6 is not set - -# -# IP: Virtual Server Configuration -# -# CONFIG_IP_VS is not set -CONFIG_IPV6=m -# CONFIG_IPV6_PRIVACY is not set -CONFIG_INET6_AH=m -CONFIG_INET6_ESP=m -CONFIG_INET6_IPCOMP=m -CONFIG_INET6_TUNNEL=m -CONFIG_IPV6_TUNNEL=m -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set -CONFIG_BRIDGE_NETFILTER=y - -# -# IP: Netfilter Configuration -# -CONFIG_IP_NF_CONNTRACK=m -CONFIG_IP_NF_CT_ACCT=y -CONFIG_IP_NF_CONNTRACK_MARK=y -CONFIG_IP_NF_CT_PROTO_SCTP=m -CONFIG_IP_NF_FTP=m -CONFIG_IP_NF_IRC=m -CONFIG_IP_NF_TFTP=m -CONFIG_IP_NF_AMANDA=m -CONFIG_IP_NF_QUEUE=m -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_LIMIT=m -CONFIG_IP_NF_MATCH_IPRANGE=m -CONFIG_IP_NF_MATCH_MAC=m -CONFIG_IP_NF_MATCH_PKTTYPE=m -CONFIG_IP_NF_MATCH_MARK=m -CONFIG_IP_NF_MATCH_MULTIPORT=m -CONFIG_IP_NF_MATCH_TOS=m -CONFIG_IP_NF_MATCH_RECENT=m -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_DSCP=m -CONFIG_IP_NF_MATCH_AH_ESP=m -CONFIG_IP_NF_MATCH_LENGTH=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_TCPMSS=m -CONFIG_IP_NF_MATCH_HELPER=m -CONFIG_IP_NF_MATCH_STATE=m -CONFIG_IP_NF_MATCH_CONNTRACK=m -CONFIG_IP_NF_MATCH_OWNER=m -CONFIG_IP_NF_MATCH_PHYSDEV=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m -CONFIG_IP_NF_MATCH_REALM=m -CONFIG_IP_NF_MATCH_SCTP=m -CONFIG_IP_NF_MATCH_COMMENT=m -CONFIG_IP_NF_MATCH_CONNMARK=m -CONFIG_IP_NF_MATCH_HASHLIMIT=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m -CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_TARGET_TCPMSS=m -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_IP_NF_TARGET_NETMAP=m -CONFIG_IP_NF_TARGET_SAME=m -CONFIG_IP_NF_NAT_SNMP_BASIC=m -CONFIG_IP_NF_NAT_IRC=m -CONFIG_IP_NF_NAT_FTP=m -CONFIG_IP_NF_NAT_TFTP=m -CONFIG_IP_NF_NAT_AMANDA=m -CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_TOS=m -CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_DSCP=m -CONFIG_IP_NF_TARGET_MARK=m -CONFIG_IP_NF_TARGET_CLASSIFY=m -CONFIG_IP_NF_TARGET_CONNMARK=m -CONFIG_IP_NF_TARGET_CLUSTERIP=m -CONFIG_IP_NF_RAW=m -CONFIG_IP_NF_TARGET_NOTRACK=m -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -CONFIG_IP_NF_ARP_MANGLE=m - -# -# IPv6: Netfilter Configuration (EXPERIMENTAL) -# -CONFIG_IP6_NF_QUEUE=m -CONFIG_IP6_NF_IPTABLES=m -CONFIG_IP6_NF_MATCH_LIMIT=m -CONFIG_IP6_NF_MATCH_MAC=m -CONFIG_IP6_NF_MATCH_RT=m -CONFIG_IP6_NF_MATCH_OPTS=m -CONFIG_IP6_NF_MATCH_FRAG=m -CONFIG_IP6_NF_MATCH_HL=m -CONFIG_IP6_NF_MATCH_MULTIPORT=m -CONFIG_IP6_NF_MATCH_OWNER=m -CONFIG_IP6_NF_MATCH_MARK=m -CONFIG_IP6_NF_MATCH_IPV6HEADER=m -CONFIG_IP6_NF_MATCH_AHESP=m -CONFIG_IP6_NF_MATCH_LENGTH=m -CONFIG_IP6_NF_MATCH_EUI64=m -# CONFIG_IP6_NF_MATCH_PHYSDEV is not set -CONFIG_IP6_NF_FILTER=m -CONFIG_IP6_NF_TARGET_LOG=m -CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_TARGET_MARK=m -CONFIG_IP6_NF_RAW=m - -# -# DECnet: Netfilter Configuration -# -# CONFIG_DECNET_NF_GRABULATOR is not set - -# -# Bridge: Netfilter Configuration -# -CONFIG_BRIDGE_NF_EBTABLES=m -CONFIG_BRIDGE_EBT_BROUTE=m -CONFIG_BRIDGE_EBT_T_FILTER=m -CONFIG_BRIDGE_EBT_T_NAT=m -CONFIG_BRIDGE_EBT_802_3=m -CONFIG_BRIDGE_EBT_AMONG=m -CONFIG_BRIDGE_EBT_ARP=m -CONFIG_BRIDGE_EBT_IP=m -CONFIG_BRIDGE_EBT_LIMIT=m -CONFIG_BRIDGE_EBT_MARK=m -CONFIG_BRIDGE_EBT_PKTTYPE=m -CONFIG_BRIDGE_EBT_STP=m -CONFIG_BRIDGE_EBT_VLAN=m -CONFIG_BRIDGE_EBT_ARPREPLY=m -CONFIG_BRIDGE_EBT_DNAT=m -CONFIG_BRIDGE_EBT_MARK_T=m -CONFIG_BRIDGE_EBT_REDIRECT=m -CONFIG_BRIDGE_EBT_SNAT=m -CONFIG_BRIDGE_EBT_LOG=m -CONFIG_BRIDGE_EBT_ULOG=m -CONFIG_XFRM=y -CONFIG_XFRM_USER=m - -# -# SCTP Configuration (EXPERIMENTAL) -# -CONFIG_IP_SCTP=m -# CONFIG_SCTP_DBG_MSG is not set -# CONFIG_SCTP_DBG_OBJCNT is not set -# CONFIG_SCTP_HMAC_NONE is not set -# CONFIG_SCTP_HMAC_SHA1 is not set -CONFIG_SCTP_HMAC_MD5=y -CONFIG_ATM=m -CONFIG_ATM_CLIP=m -# CONFIG_ATM_CLIP_NO_ICMP is not set -CONFIG_ATM_LANE=m -CONFIG_ATM_MPOA=m -CONFIG_ATM_BR2684=m -# CONFIG_ATM_BR2684_IPFILTER is not set -CONFIG_BRIDGE=m -CONFIG_VLAN_8021Q=m -CONFIG_DECNET=m -# CONFIG_DECNET_ROUTER is not set -CONFIG_LLC=m -CONFIG_LLC2=m -CONFIG_IPX=m -# CONFIG_IPX_INTERN is not set -CONFIG_ATALK=m -# CONFIG_DEV_APPLETALK is not set -CONFIG_X25=m -CONFIG_LAPB=m -# CONFIG_NET_DIVERT is not set -CONFIG_ECONET=m -# CONFIG_ECONET_AUNUDP is not set -# CONFIG_ECONET_NATIVE is not set -CONFIG_WAN_ROUTER=m - -# -# QoS and/or fair queueing -# -CONFIG_NET_SCHED=y -CONFIG_NET_SCH_CLK_JIFFIES=y -# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set -# CONFIG_NET_SCH_CLK_CPU is not set -CONFIG_NET_SCH_CBQ=m -CONFIG_NET_SCH_HTB=m -CONFIG_NET_SCH_HFSC=m -CONFIG_NET_SCH_ATM=m -CONFIG_NET_SCH_PRIO=m -CONFIG_NET_SCH_RED=m -CONFIG_NET_SCH_SFQ=m -CONFIG_NET_SCH_TEQL=m -CONFIG_NET_SCH_TBF=m -CONFIG_NET_SCH_GRED=m -CONFIG_NET_SCH_DSMARK=m -CONFIG_NET_SCH_NETEM=m -CONFIG_NET_SCH_INGRESS=m -CONFIG_NET_QOS=y -CONFIG_NET_ESTIMATOR=y -CONFIG_NET_CLS=y -CONFIG_NET_CLS_BASIC=m -CONFIG_NET_CLS_TCINDEX=m -CONFIG_NET_CLS_ROUTE4=m -CONFIG_NET_CLS_ROUTE=y -CONFIG_NET_CLS_FW=m -CONFIG_NET_CLS_U32=m -# CONFIG_CLS_U32_PERF is not set -# CONFIG_NET_CLS_IND is not set -# CONFIG_CLS_U32_MARK is not set -CONFIG_NET_CLS_RSVP=m -CONFIG_NET_CLS_RSVP6=m -# CONFIG_NET_EMATCH is not set -# CONFIG_NET_CLS_ACT is not set -CONFIG_NET_CLS_POLICE=y - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -CONFIG_NETPOLL=y -# CONFIG_NETPOLL_RX is not set -# CONFIG_NETPOLL_TRAP is not set -CONFIG_NET_POLL_CONTROLLER=y -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -CONFIG_BONDING=m -CONFIG_EQUALIZER=m -CONFIG_TUN=m - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -CONFIG_NET_VENDOR_3COM=y -CONFIG_VORTEX=m -CONFIG_TYPHOON=m - -# -# Tulip family network device support -# -CONFIG_NET_TULIP=y -CONFIG_DE2104X=m -CONFIG_TULIP=m -# CONFIG_TULIP_MWI is not set -# CONFIG_TULIP_MMIO is not set -# CONFIG_TULIP_NAPI is not set -CONFIG_DE4X5=m -CONFIG_WINBOND_840=m -CONFIG_DM9102=m -CONFIG_PCMCIA_XIRCOM=m -CONFIG_PCMCIA_XIRTULIP=m -CONFIG_HP100=m -CONFIG_IBM_EMAC=y -# CONFIG_IBM_EMAC_ERRMSG is not set -CONFIG_IBM_EMAC_RXB=128 -CONFIG_IBM_EMAC_TXB=64 -CONFIG_IBM_EMAC_FGAP=8 -CONFIG_IBM_EMAC_SKBRES=0 -CONFIG_NET_PCI=y -CONFIG_PCNET32=m -CONFIG_AMD8111_ETH=m -# CONFIG_AMD8111E_NAPI is not set -CONFIG_ADAPTEC_STARFIRE=m -# CONFIG_ADAPTEC_STARFIRE_NAPI is not set -CONFIG_B44=m -CONFIG_FORCEDETH=m -CONFIG_DGRS=m -CONFIG_EEPRO100=m -CONFIG_E100=m -CONFIG_FEALNX=m -CONFIG_NATSEMI=m -CONFIG_NE2K_PCI=m -CONFIG_8139CP=m -CONFIG_8139TOO=m -# CONFIG_8139TOO_PIO is not set -# CONFIG_8139TOO_TUNE_TWISTER is not set -# CONFIG_8139TOO_8129 is not set -# CONFIG_8139_OLD_RX_RESET is not set -CONFIG_SIS900=m -CONFIG_EPIC100=m -CONFIG_SUNDANCE=m -# CONFIG_SUNDANCE_MMIO is not set -CONFIG_TLAN=m -CONFIG_VIA_RHINE=m -# CONFIG_VIA_RHINE_MMIO is not set - -# -# Ethernet (1000 Mbit) -# -CONFIG_ACENIC=m -# CONFIG_ACENIC_OMIT_TIGON_I is not set -CONFIG_DL2K=m -CONFIG_E1000=m -# CONFIG_E1000_NAPI is not set -CONFIG_NS83820=m -CONFIG_HAMACHI=m -CONFIG_YELLOWFIN=m -CONFIG_R8169=m -# CONFIG_R8169_NAPI is not set -# CONFIG_R8169_VLAN is not set -CONFIG_SK98LIN=m -CONFIG_VIA_VELOCITY=m -CONFIG_TIGON3=m -CONFIG_BNX2=m - -# -# Ethernet (10000 Mbit) -# -# CONFIG_IXGB is not set -# CONFIG_S2IO is not set - -# -# Token Ring devices -# -# CONFIG_TR is not set - -# -# Wireless LAN (non-hamradio) -# -CONFIG_NET_RADIO=y - -# -# Obsolete Wireless cards support (pre-802.11) -# -CONFIG_STRIP=m -CONFIG_PCMCIA_WAVELAN=m -CONFIG_PCMCIA_NETWAVE=m - -# -# Wireless 802.11 Frequency Hopping cards support -# -CONFIG_PCMCIA_RAYCS=m - -# -# Wireless 802.11b ISA/PCI cards support -# -CONFIG_HERMES=m -CONFIG_PLX_HERMES=m -CONFIG_TMD_HERMES=m -CONFIG_PCI_HERMES=m -CONFIG_ATMEL=m -CONFIG_PCI_ATMEL=m - -# -# Wireless 802.11b Pcmcia/Cardbus cards support -# -CONFIG_PCMCIA_HERMES=m -CONFIG_AIRO_CS=m -CONFIG_PCMCIA_ATMEL=m -CONFIG_PCMCIA_WL3501=m - -# -# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support -# -CONFIG_PRISM54=m -CONFIG_NET_WIRELESS=y - -# -# PCMCIA network device support -# -CONFIG_NET_PCMCIA=y -CONFIG_PCMCIA_3C589=m -CONFIG_PCMCIA_3C574=m -CONFIG_PCMCIA_FMVJ18X=m -CONFIG_PCMCIA_PCNET=m -CONFIG_PCMCIA_NMCLAN=m -CONFIG_PCMCIA_SMC91C92=m -CONFIG_PCMCIA_XIRC2PS=m -CONFIG_PCMCIA_AXNET=m - -# -# Wan interfaces -# -CONFIG_WAN=y -CONFIG_DSCC4=m -# CONFIG_DSCC4_PCISYNC is not set -# CONFIG_DSCC4_PCI_RST is not set -CONFIG_LANMEDIA=m -CONFIG_SYNCLINK_SYNCPPP=m -CONFIG_HDLC=m -# CONFIG_HDLC_RAW is not set -# CONFIG_HDLC_RAW_ETH is not set -# CONFIG_HDLC_CISCO is not set -# CONFIG_HDLC_FR is not set -# CONFIG_HDLC_PPP is not set -# CONFIG_HDLC_X25 is not set -CONFIG_PCI200SYN=m -CONFIG_WANXL=m -CONFIG_PC300=m - -# -# Cyclades-PC300 MLPPP support is disabled. -# - -# -# Refer to the file README.mlppp, provided by PC300 package. -# -CONFIG_FARSYNC=m -CONFIG_DLCI=m -CONFIG_DLCI_COUNT=24 -CONFIG_DLCI_MAX=8 -# CONFIG_WAN_ROUTER_DRIVERS is not set -CONFIG_LAPBETHER=m -CONFIG_X25_ASY=m - -# -# ATM drivers -# -# CONFIG_ATM_TCP is not set -# CONFIG_ATM_LANAI is not set -# CONFIG_ATM_ENI is not set -# CONFIG_ATM_FIRESTREAM is not set -# CONFIG_ATM_ZATM is not set -# CONFIG_ATM_NICSTAR is not set -# CONFIG_ATM_IDT77252 is not set -# CONFIG_ATM_AMBASSADOR is not set -# CONFIG_ATM_HORIZON is not set -# CONFIG_ATM_IA is not set -# CONFIG_ATM_FORE200E_MAYBE is not set -# CONFIG_ATM_HE is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -# CONFIG_PLIP is not set -CONFIG_PPP=m -CONFIG_PPP_MULTILINK=y -CONFIG_PPP_FILTER=y -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_BSDCOMP=m -CONFIG_PPP_MPPE_MPPC=m -CONFIG_PPPOE=m -CONFIG_PPPOATM=m -CONFIG_SLIP=m -CONFIG_SLIP_COMPRESSED=y -CONFIG_SLIP_SMART=y -# CONFIG_SLIP_MODE_SLIP6 is not set -# CONFIG_NET_FC is not set -CONFIG_SHAPER=m -CONFIG_NETCONSOLE=m - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set - -# -# Input device support -# -CONFIG_INPUT=y - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_PSAUX=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -CONFIG_INPUT_JOYDEV=y -# CONFIG_INPUT_TSDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -CONFIG_INPUT_KEYBOARD=y -# CONFIG_KEYBOARD_ATKBD is not set -# CONFIG_KEYBOARD_SUNKBD is not set -# CONFIG_KEYBOARD_LKKBD is not set -# CONFIG_KEYBOARD_XTKBD is not set -# CONFIG_KEYBOARD_NEWTON is not set -CONFIG_INPUT_MOUSE=y -# CONFIG_MOUSE_PS2 is not set -# CONFIG_MOUSE_SERIAL is not set -# CONFIG_MOUSE_VSXXXAA is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -CONFIG_SERIO=y -# CONFIG_SERIO_I8042 is not set -# CONFIG_SERIO_SERPORT is not set -# CONFIG_SERIO_PARKBD is not set -# CONFIG_SERIO_PCIPS2 is not set -# CONFIG_SERIO_LIBPS2 is not set -# CONFIG_SERIO_RAW is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_HW_CONSOLE=y -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -# CONFIG_SERIAL_8250_CS is not set -CONFIG_SERIAL_8250_NR_UARTS=4 -# CONFIG_SERIAL_8250_EXTENDED is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_JSM is not set -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 -CONFIG_PRINTER=m -# CONFIG_LP_CONSOLE is not set -CONFIG_PPDEV=m -CONFIG_TIPAR=m - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -CONFIG_WATCHDOG=y -# CONFIG_WATCHDOG_NOWAYOUT is not set - -# -# Watchdog Device Drivers -# -CONFIG_SOFT_WATCHDOG=m - -# -# PCI-based Watchdog Cards -# -CONFIG_PCIPCWATCHDOG=m -CONFIG_WDTPCI=m -# CONFIG_WDT_501_PCI is not set - -# -# USB-based Watchdog Cards -# -CONFIG_USBPCWATCHDOG=m -CONFIG_NVRAM=m -CONFIG_GEN_RTC=m -# CONFIG_GEN_RTC_X is not set -CONFIG_DTLK=m -CONFIG_R3964=m -CONFIG_APPLICOM=m - -# -# Ftape, the floppy tape device driver -# -CONFIG_AGP=m -CONFIG_DRM=m -CONFIG_DRM_TDFX=m -CONFIG_DRM_R128=m -CONFIG_DRM_RADEON=m -CONFIG_DRM_MGA=m -CONFIG_DRM_SIS=m - -# -# PCMCIA character devices -# -CONFIG_SYNCLINK_CS=m -CONFIG_RAW_DRIVER=m -CONFIG_MAX_RAW_DEVS=256 - -# -# TPM devices -# -CONFIG_TCG_TPM=m -CONFIG_TCG_NSC=m -CONFIG_TCG_ATMEL=m - -# -# I2C support -# -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y - -# -# I2C Algorithms -# -CONFIG_I2C_ALGOBIT=y -CONFIG_I2C_ALGOPCF=m -CONFIG_I2C_ALGOPCA=m - -# -# I2C Hardware Bus support -# -# CONFIG_I2C_ALI1535 is not set -# CONFIG_I2C_ALI1563 is not set -# CONFIG_I2C_ALI15X3 is not set -# CONFIG_I2C_AMD756 is not set -# CONFIG_I2C_AMD8111 is not set -# CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set -# CONFIG_I2C_PIIX4 is not set -CONFIG_I2C_IBM_IIC=y -CONFIG_I2C_ISA=m -# CONFIG_I2C_MPC is not set -# CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_PARPORT is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_SCx200_ACB is not set -# CONFIG_I2C_SIS5595 is not set -# CONFIG_I2C_SIS630 is not set -# CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_VIA is not set -# CONFIG_I2C_VIAPRO is not set -# CONFIG_I2C_VOODOO3 is not set -# CONFIG_I2C_PCA_ISA is not set - -# -# Hardware Sensors Chip support -# -CONFIG_I2C_SENSOR=m -CONFIG_SENSORS_ADM1021=m -CONFIG_SENSORS_ADM1025=m -CONFIG_SENSORS_ADM1026=m -CONFIG_SENSORS_ADM1031=m -CONFIG_SENSORS_ASB100=m -CONFIG_SENSORS_DS1621=m -CONFIG_SENSORS_FSCHER=m -CONFIG_SENSORS_FSCPOS=m -CONFIG_SENSORS_GL518SM=m -CONFIG_SENSORS_GL520SM=m -CONFIG_SENSORS_IT87=m -CONFIG_SENSORS_LM63=m -CONFIG_SENSORS_LM75=m -CONFIG_SENSORS_LM77=m -CONFIG_SENSORS_LM78=m -CONFIG_SENSORS_LM80=m -CONFIG_SENSORS_LM83=m -CONFIG_SENSORS_LM85=m -CONFIG_SENSORS_LM87=m -CONFIG_SENSORS_LM90=m -CONFIG_SENSORS_LM92=m -CONFIG_SENSORS_MAX1619=m -CONFIG_SENSORS_PC87360=m -CONFIG_SENSORS_SMSC47B397=m -CONFIG_SENSORS_SIS5595=m -CONFIG_SENSORS_SMSC47M1=m -CONFIG_SENSORS_VIA686A=m -CONFIG_SENSORS_W83781D=m -CONFIG_SENSORS_W83L785TS=m -CONFIG_SENSORS_W83627HF=m - -# -# Other I2C Chip support -# -CONFIG_SENSORS_DS1337=m -CONFIG_SENSORS_EEPROM=m -CONFIG_SENSORS_PCF8574=m -CONFIG_SENSORS_PCF8591=m -CONFIG_SENSORS_RTC8564=m -CONFIG_SENSORS_M41T00=m -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set - -# -# Dallas's 1-wire bus -# -# CONFIG_W1 is not set - -# -# Misc devices -# - -# -# Multimedia devices -# -CONFIG_VIDEO_DEV=m - -# -# Video For Linux -# - -# -# Video Adapters -# -CONFIG_VIDEO_BT848=m -CONFIG_VIDEO_BWQCAM=m -CONFIG_VIDEO_CQCAM=m -CONFIG_VIDEO_CPIA=m -CONFIG_VIDEO_CPIA_USB=m -CONFIG_VIDEO_SAA5246A=m -CONFIG_VIDEO_SAA5249=m -CONFIG_TUNER_3036=m -CONFIG_VIDEO_STRADIS=m -CONFIG_VIDEO_ZORAN=m -CONFIG_VIDEO_ZORAN_BUZ=m -CONFIG_VIDEO_ZORAN_DC10=m -CONFIG_VIDEO_ZORAN_DC30=m -CONFIG_VIDEO_ZORAN_LML33=m -CONFIG_VIDEO_ZORAN_LML33R10=m -CONFIG_VIDEO_SAA7134=m -# CONFIG_VIDEO_SAA7134_DVB is not set -CONFIG_VIDEO_MXB=m -CONFIG_VIDEO_DPC=m -CONFIG_VIDEO_HEXIUM_ORION=m -CONFIG_VIDEO_HEXIUM_GEMINI=m -CONFIG_VIDEO_CX88=m -# CONFIG_VIDEO_CX88_DVB is not set -CONFIG_VIDEO_OVCAMCHIP=m - -# -# Radio Adapters -# -CONFIG_RADIO_GEMTEK_PCI=m -CONFIG_RADIO_MAXIRADIO=m -CONFIG_RADIO_MAESTRO=m - -# -# Digital Video Broadcasting Devices -# -CONFIG_DVB=y -CONFIG_DVB_CORE=m - -# -# Supported SAA7146 based PCI Adapters -# -CONFIG_DVB_AV7110=m -# CONFIG_DVB_AV7110_FIRMWARE is not set -CONFIG_DVB_AV7110_OSD=y -CONFIG_DVB_BUDGET=m -CONFIG_DVB_BUDGET_CI=m -CONFIG_DVB_BUDGET_AV=m -CONFIG_DVB_BUDGET_PATCH=m - -# -# Supported USB Adapters -# -CONFIG_DVB_TTUSB_BUDGET=m -CONFIG_DVB_TTUSB_DEC=m -CONFIG_DVB_DIBUSB=m -# CONFIG_DVB_DIBUSB_MISDESIGNED_DEVICES is not set -# CONFIG_DVB_DIBCOM_DEBUG is not set -CONFIG_DVB_CINERGYT2=m -# CONFIG_DVB_CINERGYT2_TUNING is not set - -# -# Supported FlexCopII (B2C2) Adapters -# -CONFIG_DVB_B2C2_FLEXCOP=m -CONFIG_DVB_B2C2_FLEXCOP_PCI=m -CONFIG_DVB_B2C2_FLEXCOP_USB=m -# CONFIG_DVB_B2C2_FLEXCOP_DEBUG is not set -CONFIG_DVB_B2C2_SKYSTAR=m - -# -# Supported BT878 Adapters -# -CONFIG_DVB_BT8XX=m - -# -# Supported DVB Frontends -# - -# -# Customise DVB Frontends -# - -# -# DVB-S (satellite) frontends -# -CONFIG_DVB_STV0299=m -CONFIG_DVB_CX24110=m -CONFIG_DVB_TDA8083=m -CONFIG_DVB_TDA80XX=m -CONFIG_DVB_MT312=m -CONFIG_DVB_VES1X93=m - -# -# DVB-T (terrestrial) frontends -# -CONFIG_DVB_SP8870=m -CONFIG_DVB_SP887X=m -CONFIG_DVB_CX22700=m -CONFIG_DVB_CX22702=m -CONFIG_DVB_L64781=m -CONFIG_DVB_TDA1004X=m -CONFIG_DVB_NXT6000=m -CONFIG_DVB_MT352=m -CONFIG_DVB_DIB3000MB=m -CONFIG_DVB_DIB3000MC=m - -# -# DVB-C (cable) frontends -# -CONFIG_DVB_ATMEL_AT76C651=m -CONFIG_DVB_VES1820=m -CONFIG_DVB_TDA10021=m -CONFIG_DVB_STV0297=m - -# -# ATSC (North American/Korean Terresterial DTV) frontends -# -CONFIG_DVB_NXT2002=m -CONFIG_DVB_OR51211=m -CONFIG_DVB_OR51132=m -CONFIG_VIDEO_SAA7146=m -CONFIG_VIDEO_SAA7146_VV=m -CONFIG_VIDEO_VIDEOBUF=m -CONFIG_VIDEO_TUNER=m -CONFIG_VIDEO_BUF=m -CONFIG_VIDEO_BTCX=m -CONFIG_VIDEO_IR=m -CONFIG_VIDEO_TVEEPROM=m - -# -# Graphics support -# -CONFIG_FB=y -CONFIG_FB_CFB_FILLRECT=y -CONFIG_FB_CFB_COPYAREA=y -CONFIG_FB_CFB_IMAGEBLIT=y -CONFIG_FB_SOFT_CURSOR=y -# CONFIG_FB_MACMODES is not set -# CONFIG_FB_MODE_HELPERS is not set -CONFIG_FB_TILEBLITTING=y -# CONFIG_FB_CIRRUS is not set -# CONFIG_FB_PM2 is not set -# CONFIG_FB_CYBER2000 is not set -# CONFIG_FB_CT65550 is not set -# CONFIG_FB_ASILIANT is not set -# CONFIG_FB_IMSTT is not set -# CONFIG_FB_VGA16 is not set -# CONFIG_FB_NVIDIA is not set -# CONFIG_FB_RIVA is not set -CONFIG_FB_MATROX=y -CONFIG_FB_MATROX_MILLENIUM=y -CONFIG_FB_MATROX_MYSTIQUE=y -CONFIG_FB_MATROX_G=y -# CONFIG_FB_MATROX_I2C is not set -# CONFIG_FB_MATROX_MULTIHEAD is not set -# CONFIG_FB_RADEON_OLD is not set -# CONFIG_FB_RADEON is not set -# CONFIG_FB_ATY128 is not set -# CONFIG_FB_ATY is not set -# CONFIG_FB_SAVAGE is not set -# CONFIG_FB_SIS is not set -# CONFIG_FB_NEOMAGIC is not set -# CONFIG_FB_KYRO is not set -# CONFIG_FB_3DFX is not set -# CONFIG_FB_VOODOO1 is not set -# CONFIG_FB_TRIDENT is not set -# CONFIG_FB_S1D13XXX is not set -# CONFIG_FB_VIRTUAL is not set - -# -# Console display driver support -# -CONFIG_DUMMY_CONSOLE=y -CONFIG_FRAMEBUFFER_CONSOLE=y -# CONFIG_FONTS is not set -CONFIG_FONT_8x8=y -CONFIG_FONT_8x16=y - -# -# Logo configuration -# -CONFIG_LOGO=y -CONFIG_LOGO_LINUX_MONO=y -CONFIG_LOGO_LINUX_VGA16=y -CONFIG_LOGO_LINUX_CLUT224=y -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -CONFIG_USB=y -# CONFIG_USB_DEBUG is not set - -# -# Miscellaneous USB options -# -CONFIG_USB_DEVICEFS=y -# CONFIG_USB_BANDWIDTH is not set -# CONFIG_USB_DYNAMIC_MINORS is not set -# CONFIG_USB_OTG is not set - -# -# USB Host Controller Drivers -# -CONFIG_USB_EHCI_HCD=y -# CONFIG_USB_EHCI_SPLIT_ISO is not set -# CONFIG_USB_EHCI_ROOT_HUB_TT is not set -CONFIG_USB_OHCI_HCD=y -# CONFIG_USB_OHCI_BIG_ENDIAN is not set -CONFIG_USB_OHCI_LITTLE_ENDIAN=y -# CONFIG_USB_UHCI_HCD is not set -# CONFIG_USB_SL811_HCD is not set - -# -# USB Device Class drivers -# -# CONFIG_USB_BLUETOOTH_TTY is not set -# CONFIG_USB_ACM is not set -CONFIG_USB_PRINTER=y - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information -# -CONFIG_USB_STORAGE=y -# CONFIG_USB_STORAGE_DEBUG is not set -# CONFIG_USB_STORAGE_DATAFAB is not set -# CONFIG_USB_STORAGE_FREECOM is not set -# CONFIG_USB_STORAGE_ISD200 is not set -# CONFIG_USB_STORAGE_DPCM is not set -# CONFIG_USB_STORAGE_USBAT is not set -# CONFIG_USB_STORAGE_SDDR09 is not set -# CONFIG_USB_STORAGE_SDDR55 is not set -# CONFIG_USB_STORAGE_JUMPSHOT is not set - -# -# USB Input Devices -# -CONFIG_USB_HID=y -CONFIG_USB_HIDINPUT=y -# CONFIG_HID_FF is not set -CONFIG_USB_HIDDEV=y -# CONFIG_USB_AIPTEK is not set -# CONFIG_USB_WACOM is not set -# CONFIG_USB_KBTAB is not set -# CONFIG_USB_POWERMATE is not set -# CONFIG_USB_MTOUCH is not set -# CONFIG_USB_EGALAX is not set -# CONFIG_USB_XPAD is not set -# CONFIG_USB_ATI_REMOTE is not set - -# -# USB Imaging devices -# -# CONFIG_USB_MDC800 is not set -# CONFIG_USB_MICROTEK is not set - -# -# USB Multimedia devices -# -# CONFIG_USB_DABUSB is not set -# CONFIG_USB_VICAM is not set -# CONFIG_USB_DSBR is not set -# CONFIG_USB_IBMCAM is not set -# CONFIG_USB_KONICAWC is not set -# CONFIG_USB_OV511 is not set -# CONFIG_USB_SE401 is not set -# CONFIG_USB_SN9C102 is not set -# CONFIG_USB_STV680 is not set -# CONFIG_USB_W9968CF is not set -# CONFIG_USB_PWC is not set - -# -# USB Network Adapters -# -# CONFIG_USB_CATC is not set -# CONFIG_USB_KAWETH is not set -CONFIG_USB_PEGASUS=y -# CONFIG_USB_RTL8150 is not set -CONFIG_USB_USBNET=y - -# -# USB Host-to-Host Cables -# -CONFIG_USB_ALI_M5632=y -CONFIG_USB_AN2720=y -CONFIG_USB_BELKIN=y -CONFIG_USB_GENESYS=y -CONFIG_USB_NET1080=y -CONFIG_USB_PL2301=y -CONFIG_USB_KC2190=y - -# -# Intelligent USB Devices/Gadgets -# -CONFIG_USB_ARMLINUX=y -CONFIG_USB_EPSON2888=y -CONFIG_USB_ZAURUS=y -CONFIG_USB_CDCETHER=y - -# -# USB Network Adapters -# -CONFIG_USB_AX8817X=y -# CONFIG_USB_ZD1201 is not set -CONFIG_USB_MON=y - -# -# USB port drivers -# -# CONFIG_USB_USS720 is not set - -# -# USB Serial Converter support -# -# CONFIG_USB_SERIAL is not set - -# -# USB Miscellaneous drivers -# -# CONFIG_USB_EMI62 is not set -# CONFIG_USB_EMI26 is not set -# CONFIG_USB_AUERSWALD is not set -# CONFIG_USB_RIO500 is not set -# CONFIG_USB_LEGOTOWER is not set -# CONFIG_USB_LCD is not set -# CONFIG_USB_LED is not set -# CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGETKIT is not set -# CONFIG_USB_PHIDGETSERVO is not set -# CONFIG_USB_IDMOUSE is not set -# CONFIG_USB_SISUSBVGA is not set -# CONFIG_USB_TEST is not set - -# -# USB ATM/DSL drivers -# -# CONFIG_USB_ATM is not set -# CONFIG_USB_SPEEDTOUCH is not set - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# -# CONFIG_MMC is not set - -# -# InfiniBand support -# -# CONFIG_INFINIBAND is not set - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -CONFIG_EXT3_FS=y -# CONFIG_EXT3_FS_XATTR is not set -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_REISERFS_FS=m -# CONFIG_REISERFS_CHECK is not set -# CONFIG_REISERFS_PROC_INFO is not set -# CONFIG_REISERFS_FS_XATTR is not set -CONFIG_JFS_FS=m -# CONFIG_JFS_POSIX_ACL is not set -# CONFIG_JFS_SECURITY is not set -# CONFIG_JFS_DEBUG is not set -# CONFIG_JFS_STATISTICS is not set - -# -# XFS support -# -# CONFIG_XFS_FS is not set -CONFIG_MINIX_FS=m -CONFIG_ROMFS_FS=m -CONFIG_QUOTA=y -CONFIG_QFMT_V1=m -CONFIG_QFMT_V2=m -CONFIG_QUOTACTL=y -CONFIG_DNOTIFY=y -CONFIG_AUTOFS_FS=m -CONFIG_AUTOFS4_FS=m - -# -# CD-ROM/DVD Filesystems -# -CONFIG_ISO9660_FS=y -CONFIG_JOLIET=y -CONFIG_ZISOFS=y -CONFIG_ZISOFS_FS=y -CONFIG_UDF_FS=y -CONFIG_UDF_NLS=y - -# -# DOS/FAT/NT Filesystems -# -CONFIG_FAT_FS=m -CONFIG_MSDOS_FS=m -CONFIG_VFAT_FS=m -CONFIG_FAT_DEFAULT_CODEPAGE=437 -CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -CONFIG_NTFS_FS=m -# CONFIG_NTFS_DEBUG is not set -CONFIG_NTFS_RW=y - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -CONFIG_SYSFS=y -CONFIG_DEVFS_FS=y -# CONFIG_DEVFS_MOUNT is not set -# CONFIG_DEVFS_DEBUG is not set -# CONFIG_DEVPTS_FS_XATTR is not set -CONFIG_TMPFS=y -# CONFIG_TMPFS_XATTR is not set -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y - -# -# Miscellaneous filesystems -# -CONFIG_ADFS_FS=m -# CONFIG_ADFS_FS_RW is not set -CONFIG_AFFS_FS=m -CONFIG_HFS_FS=m -CONFIG_HFSPLUS_FS=m -CONFIG_BEFS_FS=m -# CONFIG_BEFS_DEBUG is not set -CONFIG_BFS_FS=m -CONFIG_EFS_FS=m -CONFIG_JFFS_FS=m -CONFIG_JFFS_FS_VERBOSE=0 -# CONFIG_JFFS_PROC_FS is not set -CONFIG_JFFS2_FS=m -CONFIG_JFFS2_FS_DEBUG=0 -# CONFIG_JFFS2_FS_NAND is not set -# CONFIG_JFFS2_FS_NOR_ECC is not set -# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set -CONFIG_JFFS2_ZLIB=y -CONFIG_JFFS2_RTIME=y -# CONFIG_JFFS2_RUBIN is not set -CONFIG_CRAMFS=y -CONFIG_VXFS_FS=m -CONFIG_HPFS_FS=m -CONFIG_QNX4FS_FS=m -CONFIG_SYSV_FS=m -CONFIG_UFS_FS=m -# CONFIG_UFS_FS_WRITE is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -# CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -CONFIG_NFSD=m -# CONFIG_NFSD_V3 is not set -CONFIG_NFSD_TCP=y -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_EXPORTFS=m -CONFIG_SUNRPC=y -CONFIG_SUNRPC_GSS=m -CONFIG_RPCSEC_GSS_KRB5=m -CONFIG_RPCSEC_GSS_SPKM3=m -CONFIG_SMB_FS=m -# CONFIG_SMB_NLS_DEFAULT is not set -CONFIG_CIFS=m -# CONFIG_CIFS_STATS is not set -# CONFIG_CIFS_XATTR is not set -# CONFIG_CIFS_EXPERIMENTAL is not set -CONFIG_NCP_FS=m -# CONFIG_NCPFS_PACKET_SIGNING is not set -# CONFIG_NCPFS_IOCTL_LOCKING is not set -# CONFIG_NCPFS_STRONG is not set -# CONFIG_NCPFS_NFS_NS is not set -# CONFIG_NCPFS_OS2_NS is not set -# CONFIG_NCPFS_SMALLDOS is not set -# CONFIG_NCPFS_NLS is not set -# CONFIG_NCPFS_EXTRAS is not set -CONFIG_CODA_FS=m -# CONFIG_CODA_FS_OLD_API is not set -CONFIG_AFS_FS=m -CONFIG_RXRPC=m - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -CONFIG_MAC_PARTITION=y -CONFIG_MSDOS_PARTITION=y -# CONFIG_BSD_DISKLABEL is not set -# CONFIG_MINIX_SUBPARTITION is not set -# CONFIG_SOLARIS_X86_PARTITION is not set -# CONFIG_UNIXWARE_DISKLABEL is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_EFI_PARTITION is not set - -# -# Native Language Support -# -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="iso8859-1" -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_CODEPAGE_737=m -CONFIG_NLS_CODEPAGE_775=m -CONFIG_NLS_CODEPAGE_850=m -CONFIG_NLS_CODEPAGE_852=m -CONFIG_NLS_CODEPAGE_855=m -CONFIG_NLS_CODEPAGE_857=m -CONFIG_NLS_CODEPAGE_860=m -CONFIG_NLS_CODEPAGE_861=m -CONFIG_NLS_CODEPAGE_862=m -CONFIG_NLS_CODEPAGE_863=m -CONFIG_NLS_CODEPAGE_864=m -CONFIG_NLS_CODEPAGE_865=m -CONFIG_NLS_CODEPAGE_866=m -CONFIG_NLS_CODEPAGE_869=m -CONFIG_NLS_CODEPAGE_936=m -CONFIG_NLS_CODEPAGE_950=m -CONFIG_NLS_CODEPAGE_932=m -CONFIG_NLS_CODEPAGE_949=m -CONFIG_NLS_CODEPAGE_874=m -CONFIG_NLS_ISO8859_8=m -CONFIG_NLS_CODEPAGE_1250=m -CONFIG_NLS_CODEPAGE_1251=m -CONFIG_NLS_ASCII=m -CONFIG_NLS_ISO8859_1=y -CONFIG_NLS_ISO8859_2=m -CONFIG_NLS_ISO8859_3=m -CONFIG_NLS_ISO8859_4=m -CONFIG_NLS_ISO8859_5=m -CONFIG_NLS_ISO8859_6=m -CONFIG_NLS_ISO8859_7=m -CONFIG_NLS_ISO8859_9=m -CONFIG_NLS_ISO8859_13=m -CONFIG_NLS_ISO8859_14=m -CONFIG_NLS_ISO8859_15=m -CONFIG_NLS_KOI8_R=m -CONFIG_NLS_KOI8_U=m -CONFIG_NLS_UTF8=m - -# -# IBM 40x options -# - -# -# Library routines -# -CONFIG_CRC_CCITT=m -CONFIG_CRC32=y -# CONFIG_LIBCRC32C is not set -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=m -CONFIG_REED_SOLOMON=m -CONFIG_REED_SOLOMON_DEC16=y - -# -# Profiling support -# -# CONFIG_PROFILING is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -# CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_SERIAL_TEXT_DEBUG is not set -CONFIG_PPC_OCP=y - -# -# Security options -# -# CONFIG_KEYS is not set -CONFIG_SECURITY=y -CONFIG_SECURITY_NETWORK=y -CONFIG_SECURITY_CAPABILITIES=m -CONFIG_SECURITY_ROOTPLUG=m -CONFIG_SECURITY_SECLVL=m -# CONFIG_SECURITY_SELINUX is not set - -# -# Cryptographic options -# -CONFIG_CRYPTO=y -CONFIG_CRYPTO_HMAC=y -# CONFIG_CRYPTO_NULL is not set -# CONFIG_CRYPTO_MD4 is not set -CONFIG_CRYPTO_MD5=m -CONFIG_CRYPTO_SHA1=m -# CONFIG_CRYPTO_SHA256 is not set -# CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set -# CONFIG_CRYPTO_TGR192 is not set -CONFIG_CRYPTO_DES=m -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set -# CONFIG_CRYPTO_AES is not set -# CONFIG_CRYPTO_CAST5 is not set -# CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -CONFIG_CRYPTO_ARC4=m -# CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -CONFIG_CRYPTO_DEFLATE=m -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_TEST is not set - -# -# Hardware crypto devices -# diff --git a/packages/linux/linux-dht-walnut-2.6.12/iw_we18-5.diff b/packages/linux/linux-dht-walnut-2.6.12/iw_we18-5.diff deleted file mode 100644 index 85fcdd1224..0000000000 --- a/packages/linux/linux-dht-walnut-2.6.12/iw_we18-5.diff +++ /dev/null @@ -1,462 +0,0 @@ -diff -upr linux-2.6.11/include/linux/wireless.h linux-2.6.11-WE18/include/linux/wireless.h ---- linux-2.6.11/include/linux/wireless.h 2004-12-24 13:35:01.000000000 -0800 -+++ linux-2.6.11-WE18/include/linux/wireless.h 2005-03-12 09:53:02.000000000 -0800 -@@ -1,10 +1,10 @@ - /* - * This file define a set of standard wireless extensions - * -- * Version : 17 21.6.04 -+ * Version : 18 12.3.05 - * - * Authors : Jean Tourrilhes - HPL - <jt@hpl.hp.com> -- * Copyright (c) 1997-2004 Jean Tourrilhes, All Rights Reserved. -+ * Copyright (c) 1997-2005 Jean Tourrilhes, All Rights Reserved. - */ - - #ifndef _LINUX_WIRELESS_H -@@ -82,7 +82,7 @@ - * (there is some stuff that will be added in the future...) - * I just plan to increment with each new version. - */ --#define WIRELESS_EXT 17 -+#define WIRELESS_EXT 18 - - /* - * Changes : -@@ -182,6 +182,21 @@ - * - Document (struct iw_quality *)->updated, add new flags (INVALID) - * - Wireless Event capability in struct iw_range - * - Add support for relative TxPower (yick !) -+ * -+ * V17 to V18 (From Jouni Malinen <jkmaline@cc.hut.fi>) -+ * ---------- -+ * - Add support for WPA/WPA2 -+ * - Add extended encoding configuration (SIOCSIWENCODEEXT and -+ * SIOCGIWENCODEEXT) -+ * - Add SIOCSIWGENIE/SIOCGIWGENIE -+ * - Add SIOCSIWMLME -+ * - Add SIOCSIWPMKSA -+ * - Add struct iw_range bit field for supported encoding capabilities -+ * - Add optional scan request parameters for SIOCSIWSCAN -+ * - Add SIOCSIWAUTH/SIOCGIWAUTH for setting authentication and WPA -+ * related parameters (extensible up to 4096 parameter values) -+ * - Add wireless events: IWEVGENIE, IWEVMICHAELMICFAILURE, -+ * IWEVASSOCREQIE, IWEVASSOCRESPIE, IWEVPMKIDCAND - */ - - /**************************** CONSTANTS ****************************/ -@@ -256,6 +271,30 @@ - #define SIOCSIWPOWER 0x8B2C /* set Power Management settings */ - #define SIOCGIWPOWER 0x8B2D /* get Power Management settings */ - -+/* WPA : Generic IEEE 802.11 informatiom element (e.g., for WPA/RSN/WMM). -+ * This ioctl uses struct iw_point and data buffer that includes IE id and len -+ * fields. More than one IE may be included in the request. Setting the generic -+ * IE to empty buffer (len=0) removes the generic IE from the driver. Drivers -+ * are allowed to generate their own WPA/RSN IEs, but in these cases, drivers -+ * are required to report the used IE as a wireless event, e.g., when -+ * associating with an AP. */ -+#define SIOCSIWGENIE 0x8B30 /* set generic IE */ -+#define SIOCGIWGENIE 0x8B31 /* get generic IE */ -+ -+/* WPA : IEEE 802.11 MLME requests */ -+#define SIOCSIWMLME 0x8B16 /* request MLME operation; uses -+ * struct iw_mlme */ -+/* WPA : Authentication mode parameters */ -+#define SIOCSIWAUTH 0x8B32 /* set authentication mode params */ -+#define SIOCGIWAUTH 0x8B33 /* get authentication mode params */ -+ -+/* WPA : Extended version of encoding configuration */ -+#define SIOCSIWENCODEEXT 0x8B34 /* set encoding token & mode */ -+#define SIOCGIWENCODEEXT 0x8B35 /* get encoding token & mode */ -+ -+/* WPA2 : PMKSA cache management */ -+#define SIOCSIWPMKSA 0x8B36 /* PMKSA cache operation */ -+ - /* -------------------- DEV PRIVATE IOCTL LIST -------------------- */ - - /* These 32 ioctl are wireless device private, for 16 commands. -@@ -297,6 +336,34 @@ - #define IWEVCUSTOM 0x8C02 /* Driver specific ascii string */ - #define IWEVREGISTERED 0x8C03 /* Discovered a new node (AP mode) */ - #define IWEVEXPIRED 0x8C04 /* Expired a node (AP mode) */ -+#define IWEVGENIE 0x8C05 /* Generic IE (WPA, RSN, WMM, ..) -+ * (scan results); This includes id and -+ * length fields. One IWEVGENIE may -+ * contain more than one IE. Scan -+ * results may contain one or more -+ * IWEVGENIE events. */ -+#define IWEVMICHAELMICFAILURE 0x8C06 /* Michael MIC failure -+ * (struct iw_michaelmicfailure) -+ */ -+#define IWEVASSOCREQIE 0x8C07 /* IEs used in (Re)Association Request. -+ * The data includes id and length -+ * fields and may contain more than one -+ * IE. This event is required in -+ * Managed mode if the driver -+ * generates its own WPA/RSN IE. This -+ * should be sent just before -+ * IWEVREGISTERED event for the -+ * association. */ -+#define IWEVASSOCRESPIE 0x8C08 /* IEs used in (Re)Association -+ * Response. The data includes id and -+ * length fields and may contain more -+ * than one IE. This may be sent -+ * between IWEVASSOCREQIE and -+ * IWEVREGISTERED events for the -+ * association. */ -+#define IWEVPMKIDCAND 0x8C09 /* PMKID candidate for RSN -+ * pre-authentication -+ * (struct iw_pmkid_cand) */ - - #define IWEVFIRST 0x8C00 - -@@ -432,12 +499,94 @@ - #define IW_SCAN_THIS_MODE 0x0020 /* Scan only this Mode */ - #define IW_SCAN_ALL_RATE 0x0040 /* Scan all Bit-Rates */ - #define IW_SCAN_THIS_RATE 0x0080 /* Scan only this Bit-Rate */ -+/* struct iw_scan_req scan_type */ -+#define IW_SCAN_TYPE_ACTIVE 0 -+#define IW_SCAN_TYPE_PASSIVE 1 - /* Maximum size of returned data */ - #define IW_SCAN_MAX_DATA 4096 /* In bytes */ - - /* Max number of char in custom event - use multiple of them if needed */ - #define IW_CUSTOM_MAX 256 /* In bytes */ - -+/* Generic information element */ -+#define IW_GENERIC_IE_MAX 1024 -+ -+/* MLME requests (SIOCSIWMLME / struct iw_mlme) */ -+#define IW_MLME_DEAUTH 0 -+#define IW_MLME_DISASSOC 1 -+ -+/* SIOCSIWAUTH/SIOCGIWAUTH struct iw_param flags */ -+#define IW_AUTH_INDEX 0x0FFF -+#define IW_AUTH_FLAGS 0xF000 -+/* SIOCSIWAUTH/SIOCGIWAUTH parameters (0 .. 4095) -+ * (IW_AUTH_INDEX mask in struct iw_param flags; this is the index of the -+ * parameter that is being set/get to; value will be read/written to -+ * struct iw_param value field) */ -+#define IW_AUTH_WPA_VERSION 0 -+#define IW_AUTH_CIPHER_PAIRWISE 1 -+#define IW_AUTH_CIPHER_GROUP 2 -+#define IW_AUTH_KEY_MGMT 3 -+#define IW_AUTH_TKIP_COUNTERMEASURES 4 -+#define IW_AUTH_DROP_UNENCRYPTED 5 -+#define IW_AUTH_80211_AUTH_ALG 6 -+#define IW_AUTH_WPA_ENABLED 7 -+#define IW_AUTH_RX_UNENCRYPTED_EAPOL 8 -+#define IW_AUTH_ROAMING_CONTROL 9 -+#define IW_AUTH_PRIVACY_INVOKED 10 -+ -+/* IW_AUTH_WPA_VERSION values (bit field) */ -+#define IW_AUTH_WPA_VERSION_DISABLED 0x00000001 -+#define IW_AUTH_WPA_VERSION_WPA 0x00000002 -+#define IW_AUTH_WPA_VERSION_WPA2 0x00000004 -+ -+/* IW_AUTH_PAIRWISE_CIPHER and IW_AUTH_GROUP_CIPHER values (bit field) */ -+#define IW_AUTH_CIPHER_NONE 0x00000001 -+#define IW_AUTH_CIPHER_WEP40 0x00000002 -+#define IW_AUTH_CIPHER_TKIP 0x00000004 -+#define IW_AUTH_CIPHER_CCMP 0x00000008 -+#define IW_AUTH_CIPHER_WEP104 0x00000010 -+ -+/* IW_AUTH_KEY_MGMT values (bit field) */ -+#define IW_AUTH_KEY_MGMT_802_1X 1 -+#define IW_AUTH_KEY_MGMT_PSK 2 -+ -+/* IW_AUTH_80211_AUTH_ALG values (bit field) */ -+#define IW_AUTH_ALG_OPEN_SYSTEM 0x00000001 -+#define IW_AUTH_ALG_SHARED_KEY 0x00000002 -+#define IW_AUTH_ALG_LEAP 0x00000004 -+ -+/* IW_AUTH_ROAMING_CONTROL values */ -+#define IW_AUTH_ROAMING_ENABLE 0 /* driver/firmware based roaming */ -+#define IW_AUTH_ROAMING_DISABLE 1 /* user space program used for roaming -+ * control */ -+ -+/* SIOCSIWENCODEEXT definitions */ -+#define IW_ENCODE_SEQ_MAX_SIZE 8 -+/* struct iw_encode_ext ->alg */ -+#define IW_ENCODE_ALG_NONE 0 -+#define IW_ENCODE_ALG_WEP 1 -+#define IW_ENCODE_ALG_TKIP 2 -+#define IW_ENCODE_ALG_CCMP 3 -+/* struct iw_encode_ext ->ext_flags */ -+#define IW_ENCODE_EXT_TX_SEQ_VALID 0x00000001 -+#define IW_ENCODE_EXT_RX_SEQ_VALID 0x00000002 -+#define IW_ENCODE_EXT_GROUP_KEY 0x00000004 -+#define IW_ENCODE_EXT_SET_TX_KEY 0x00000008 -+ -+/* IWEVMICHAELMICFAILURE : struct iw_michaelmicfailure ->flags */ -+#define IW_MICFAILURE_KEY_ID 0x00000003 /* Key ID 0..3 */ -+#define IW_MICFAILURE_GROUP 0x00000004 -+#define IW_MICFAILURE_PAIRWISE 0x00000008 -+#define IW_MICFAILURE_STAKEY 0x00000010 -+#define IW_MICFAILURE_COUNT 0x00000060 /* 1 or 2 (0 = count not supported) -+ */ -+ -+/* Bit field values for enc_capa in struct iw_range */ -+#define IW_ENC_CAPA_WPA 0x00000001 -+#define IW_ENC_CAPA_WPA2 0x00000002 -+#define IW_ENC_CAPA_CIPHER_TKIP 0x00000004 -+#define IW_ENC_CAPA_CIPHER_CCMP 0x00000008 -+ - /* Event capability macros - in (struct iw_range *)->event_capa - * Because we have more than 32 possible events, we use an array of - * 32 bit bitmasks. Note : 32 bits = 0x20 = 2^5. */ -@@ -546,6 +695,132 @@ struct iw_thrspy - struct iw_quality high; /* High threshold */ - }; - -+/* -+ * Optional data for scan request -+ * -+ * Note: these optional parameters are controlling parameters for the -+ * scanning behavior, these do not apply to getting scan results -+ * (SIOCGIWSCAN). Drivers are expected to keep a local BSS table and -+ * provide a merged results with all BSSes even if the previous scan -+ * request limited scanning to a subset, e.g., by specifying an SSID. -+ * Especially, scan results are required to include an entry for the -+ * current BSS if the driver is in Managed mode and associated with an AP. -+ */ -+struct iw_scan_req -+{ -+ __u8 scan_type; /* IW_SCAN_TYPE_{ACTIVE,PASSIVE} */ -+ __u8 essid_len; -+ __u8 num_channels; /* num entries in channel_list; -+ * 0 = scan all allowed channels */ -+ __u8 flags; /* reserved as padding; use zero, this may -+ * be used in the future for adding flags -+ * to request different scan behavior */ -+ struct sockaddr bssid; /* ff:ff:ff:ff:ff:ff for broadcast BSSID or -+ * individual address of a specific BSS */ -+ -+ /* -+ * Use this ESSID if IW_SCAN_THIS_ESSID flag is used instead of using -+ * the current ESSID. This allows scan requests for specific ESSID -+ * without having to change the current ESSID and potentially breaking -+ * the current association. -+ */ -+ __u8 essid[IW_ESSID_MAX_SIZE]; -+ -+ /* -+ * Optional parameters for changing the default scanning behavior. -+ * These are based on the MLME-SCAN.request from IEEE Std 802.11. -+ * TU is 1.024 ms. If these are set to 0, driver is expected to use -+ * reasonable default values. min_channel_time defines the time that -+ * will be used to wait for the first reply on each channel. If no -+ * replies are received, next channel will be scanned after this. If -+ * replies are received, total time waited on the channel is defined by -+ * max_channel_time. -+ */ -+ __u32 min_channel_time; /* in TU */ -+ __u32 max_channel_time; /* in TU */ -+ -+ struct iw_freq channel_list[IW_MAX_FREQUENCIES]; -+}; -+ -+/* ------------------------- WPA SUPPORT ------------------------- */ -+ -+/* -+ * Extended data structure for get/set encoding (this is used with -+ * SIOCSIWENCODEEXT/SIOCGIWENCODEEXT. struct iw_point and IW_ENCODE_* -+ * flags are used in the same way as with SIOCSIWENCODE/SIOCGIWENCODE and -+ * only the data contents changes (key data -> this structure, including -+ * key data). -+ * -+ * If the new key is the first group key, it will be set as the default -+ * TX key. Otherwise, default TX key index is only changed if -+ * IW_ENCODE_EXT_SET_TX_KEY flag is set. -+ * -+ * Key will be changed with SIOCSIWENCODEEXT in all cases except for -+ * special "change TX key index" operation which is indicated by setting -+ * key_len = 0 and ext_flags |= IW_ENCODE_EXT_SET_TX_KEY. -+ * -+ * tx_seq/rx_seq are only used when respective -+ * IW_ENCODE_EXT_{TX,RX}_SEQ_VALID flag is set in ext_flags. Normal -+ * TKIP/CCMP operation is to set RX seq with SIOCSIWENCODEEXT and start -+ * TX seq from zero whenever key is changed. SIOCGIWENCODEEXT is normally -+ * used only by an Authenticator (AP or an IBSS station) to get the -+ * current TX sequence number. Using TX_SEQ_VALID for SIOCSIWENCODEEXT and -+ * RX_SEQ_VALID for SIOCGIWENCODEEXT are optional, but can be useful for -+ * debugging/testing. -+ */ -+struct iw_encode_ext -+{ -+ __u32 ext_flags; /* IW_ENCODE_EXT_* */ -+ __u8 tx_seq[IW_ENCODE_SEQ_MAX_SIZE]; /* LSB first */ -+ __u8 rx_seq[IW_ENCODE_SEQ_MAX_SIZE]; /* LSB first */ -+ struct sockaddr addr; /* ff:ff:ff:ff:ff:ff for broadcast/multicast -+ * (group) keys or unicast address for -+ * individual keys */ -+ __u16 alg; /* IW_ENCODE_ALG_* */ -+ __u16 key_len; -+ __u8 key[0]; -+}; -+ -+/* SIOCSIWMLME data */ -+struct iw_mlme -+{ -+ __u16 cmd; /* IW_MLME_* */ -+ __u16 reason_code; -+ struct sockaddr addr; -+}; -+ -+/* SIOCSIWPMKSA data */ -+#define IW_PMKSA_ADD 1 -+#define IW_PMKSA_REMOVE 2 -+#define IW_PMKSA_FLUSH 3 -+ -+#define IW_PMKID_LEN 16 -+ -+struct iw_pmksa -+{ -+ __u32 cmd; /* IW_PMKSA_* */ -+ struct sockaddr bssid; -+ __u8 pmkid[IW_PMKID_LEN]; -+}; -+ -+/* IWEVMICHAELMICFAILURE data */ -+struct iw_michaelmicfailure -+{ -+ __u32 flags; -+ struct sockaddr src_addr; -+ __u8 tsc[IW_ENCODE_SEQ_MAX_SIZE]; /* LSB first */ -+}; -+ -+/* IWEVPMKIDCAND data */ -+#define IW_PMKID_CAND_PREAUTH 0x00000001 /* RNS pre-authentication enabled */ -+struct iw_pmkid_cand -+{ -+ __u32 flags; /* IW_PMKID_CAND_* */ -+ __u32 index; /* the smaller the index, the higher the -+ * priority */ -+ struct sockaddr bssid; -+}; -+ - /* ------------------------ WIRELESS STATS ------------------------ */ - /* - * Wireless statistics (used for /proc/net/wireless) -@@ -725,6 +1000,8 @@ struct iw_range - struct iw_freq freq[IW_MAX_FREQUENCIES]; /* list */ - /* Note : this frequency list doesn't need to fit channel numbers, - * because each entry contain its channel index */ -+ -+ __u32 enc_capa; /* IW_ENC_CAPA_* bit field */ - }; - - /* -diff -upr linux-2.6.11/net/core/wireless.c linux-2.6.11-WE18/net/core/wireless.c ---- linux-2.6.11/net/core/wireless.c 2005-03-04 15:55:29.000000000 -0800 -+++ linux-2.6.11-WE18/net/core/wireless.c 2005-03-12 09:11:24.000000000 -0800 -@@ -2,7 +2,7 @@ - * This file implement the Wireless Extensions APIs. - * - * Authors : Jean Tourrilhes - HPL - <jt@hpl.hp.com> -- * Copyright (c) 1997-2004 Jean Tourrilhes, All Rights Reserved. -+ * Copyright (c) 1997-2005 Jean Tourrilhes, All Rights Reserved. - * - * (As all part of the Linux kernel, this file is GPL) - */ -@@ -187,6 +187,12 @@ static const struct iw_ioctl_description - .header_type = IW_HEADER_TYPE_ADDR, - .flags = IW_DESCR_FLAG_DUMP, - }, -+ [SIOCSIWMLME - SIOCIWFIRST] = { -+ .header_type = IW_HEADER_TYPE_POINT, -+ .token_size = 1, -+ .min_tokens = sizeof(struct iw_mlme), -+ .max_tokens = sizeof(struct iw_mlme), -+ }, - [SIOCGIWAPLIST - SIOCIWFIRST] = { - .header_type = IW_HEADER_TYPE_POINT, - .token_size = sizeof(struct sockaddr) + -@@ -195,7 +201,10 @@ static const struct iw_ioctl_description - .flags = IW_DESCR_FLAG_NOMAX, - }, - [SIOCSIWSCAN - SIOCIWFIRST] = { -- .header_type = IW_HEADER_TYPE_PARAM, -+ .header_type = IW_HEADER_TYPE_POINT, -+ .token_size = 1, -+ .min_tokens = 0, -+ .max_tokens = sizeof(struct iw_scan_req), - }, - [SIOCGIWSCAN - SIOCIWFIRST] = { - .header_type = IW_HEADER_TYPE_POINT, -@@ -273,6 +282,42 @@ static const struct iw_ioctl_description - [SIOCGIWPOWER - SIOCIWFIRST] = { - .header_type = IW_HEADER_TYPE_PARAM, - }, -+ [SIOCSIWGENIE - SIOCIWFIRST] = { -+ .header_type = IW_HEADER_TYPE_POINT, -+ .token_size = 1, -+ .max_tokens = IW_GENERIC_IE_MAX, -+ }, -+ [SIOCGIWGENIE - SIOCIWFIRST] = { -+ .header_type = IW_HEADER_TYPE_POINT, -+ .token_size = 1, -+ .max_tokens = IW_GENERIC_IE_MAX, -+ }, -+ [SIOCSIWAUTH - SIOCIWFIRST] = { -+ .header_type = IW_HEADER_TYPE_PARAM, -+ }, -+ [SIOCGIWAUTH - SIOCIWFIRST] = { -+ .header_type = IW_HEADER_TYPE_PARAM, -+ }, -+ [SIOCSIWENCODEEXT - SIOCIWFIRST] = { -+ .header_type = IW_HEADER_TYPE_POINT, -+ .token_size = 1, -+ .min_tokens = sizeof(struct iw_encode_ext), -+ .max_tokens = sizeof(struct iw_encode_ext) + -+ IW_ENCODING_TOKEN_MAX, -+ }, -+ [SIOCGIWENCODEEXT - SIOCIWFIRST] = { -+ .header_type = IW_HEADER_TYPE_POINT, -+ .token_size = 1, -+ .min_tokens = sizeof(struct iw_encode_ext), -+ .max_tokens = sizeof(struct iw_encode_ext) + -+ IW_ENCODING_TOKEN_MAX, -+ }, -+ [SIOCSIWPMKSA - SIOCIWFIRST] = { -+ .header_type = IW_HEADER_TYPE_POINT, -+ .token_size = 1, -+ .min_tokens = sizeof(struct iw_pmksa), -+ .max_tokens = sizeof(struct iw_pmksa), -+ }, - }; - static const int standard_ioctl_num = (sizeof(standard_ioctl) / - sizeof(struct iw_ioctl_description)); -@@ -299,6 +344,31 @@ static const struct iw_ioctl_description - [IWEVEXPIRED - IWEVFIRST] = { - .header_type = IW_HEADER_TYPE_ADDR, - }, -+ [IWEVGENIE - IWEVFIRST] = { -+ .header_type = IW_HEADER_TYPE_POINT, -+ .token_size = 1, -+ .max_tokens = IW_GENERIC_IE_MAX, -+ }, -+ [IWEVMICHAELMICFAILURE - IWEVFIRST] = { -+ .header_type = IW_HEADER_TYPE_POINT, -+ .token_size = 1, -+ .max_tokens = sizeof(struct iw_michaelmicfailure), -+ }, -+ [IWEVASSOCREQIE - IWEVFIRST] = { -+ .header_type = IW_HEADER_TYPE_POINT, -+ .token_size = 1, -+ .max_tokens = IW_GENERIC_IE_MAX, -+ }, -+ [IWEVASSOCRESPIE - IWEVFIRST] = { -+ .header_type = IW_HEADER_TYPE_POINT, -+ .token_size = 1, -+ .max_tokens = IW_GENERIC_IE_MAX, -+ }, -+ [IWEVPMKIDCAND - IWEVFIRST] = { -+ .header_type = IW_HEADER_TYPE_POINT, -+ .token_size = 1, -+ .max_tokens = sizeof(struct iw_pmkid_cand), -+ }, - }; - static const int standard_event_num = (sizeof(standard_event) / - sizeof(struct iw_ioctl_description)); diff --git a/packages/linux/linux-dht-walnut-2.6.12/linux-2.6.12-mppe-mppc-1.3.patch b/packages/linux/linux-dht-walnut-2.6.12/linux-2.6.12-mppe-mppc-1.3.patch deleted file mode 100644 index aa430252c7..0000000000 --- a/packages/linux/linux-dht-walnut-2.6.12/linux-2.6.12-mppe-mppc-1.3.patch +++ /dev/null @@ -1,1559 +0,0 @@ -diff -ruN linux-2.6.12.orig/drivers/net/Kconfig linux-2.6.12/drivers/net/Kconfig ---- linux-2.6.12.orig/drivers/net/Kconfig 2005-06-28 19:57:16.000000000 +0200 -+++ linux-2.6.12/drivers/net/Kconfig 2005-06-28 20:07:01.000000000 +0200 -@@ -2417,6 +2417,32 @@ - module; it is called bsd_comp and will show up in the directory - modules once you have said "make modules". If unsure, say N. - -+config PPP_MPPE_MPPC -+ tristate "Microsoft PPP compression/encryption (MPPC/MPPE)" -+ depends on PPP -+ select CRYPTO_SHA1 -+ select CRYPTO_ARC4 -+ ---help--- -+ Support for the Microsoft Point-To-Point Compression (RFC2118) and -+ Microsoft Point-To-Point Encryption (RFC3078). These protocols are -+ supported by Microsoft Windows and wide range of "hardware" access -+ servers. MPPE is common protocol in Virtual Private Networks. According -+ to RFC3078, MPPE supports 40, 56 and 128-bit key lengths. Depending on -+ PPP daemon configuration on both ends of the link, following scenarios -+ are possible: -+ - only compression (MPPC) is used, -+ - only encryption (MPPE) is used, -+ - compression and encryption (MPPC+MPPE) are used. -+ -+ Please note that Hi/Fn (http://www.hifn.com) holds patent on MPPC so -+ you should check if this patent is valid in your country in order to -+ avoid legal problems. -+ -+ For more information please visit http://free.polbox.pl/h/hs001 -+ -+ To compile this driver as a module, choose M here. The module will -+ be called ppp_mppe_mppc.ko. -+ - config PPPOE - tristate "PPP over Ethernet (EXPERIMENTAL)" - depends on EXPERIMENTAL && PPP -diff -ruN linux-2.6.12.orig/drivers/net/Makefile linux-2.6.12/drivers/net/Makefile ---- linux-2.6.12.orig/drivers/net/Makefile 2005-06-28 19:57:16.000000000 +0200 -+++ linux-2.6.12/drivers/net/Makefile 2005-06-28 20:07:01.000000000 +0200 -@@ -105,6 +105,7 @@ - obj-$(CONFIG_PPP_SYNC_TTY) += ppp_synctty.o - obj-$(CONFIG_PPP_DEFLATE) += ppp_deflate.o - obj-$(CONFIG_PPP_BSDCOMP) += bsd_comp.o -+obj-$(CONFIG_PPP_MPPE_MPPC) += ppp_mppe_mppc.o - obj-$(CONFIG_PPPOE) += pppox.o pppoe.o - - obj-$(CONFIG_SLIP) += slip.o -diff -ruN linux-2.6.12.orig/drivers/net/ppp_generic.c linux-2.6.12/drivers/net/ppp_generic.c ---- linux-2.6.12.orig/drivers/net/ppp_generic.c 2005-06-28 19:57:20.000000000 +0200 -+++ linux-2.6.12/drivers/net/ppp_generic.c 2005-06-28 20:07:01.000000000 +0200 -@@ -19,7 +19,7 @@ - * PPP driver, written by Michael Callahan and Al Longyear, and - * subsequently hacked by Paul Mackerras. - * -- * ==FILEVERSION 20041108== -+ * ==FILEVERSION 20050110== - */ - - #include <linux/config.h> -@@ -105,6 +105,7 @@ - spinlock_t rlock; /* lock for receive side 58 */ - spinlock_t wlock; /* lock for transmit side 5c */ - int mru; /* max receive unit 60 */ -+ int mru_alloc; /* MAX(1500,MRU) for dev_alloc_skb() */ - unsigned int flags; /* control bits 64 */ - unsigned int xstate; /* transmit state bits 68 */ - unsigned int rstate; /* receive state bits 6c */ -@@ -632,7 +633,9 @@ - case PPPIOCSMRU: - if (get_user(val, p)) - break; -- ppp->mru = val; -+ ppp->mru_alloc = ppp->mru = val; -+ if (ppp->mru_alloc < PPP_MRU) -+ ppp->mru_alloc = PPP_MRU; /* increase for broken peers */ - err = 0; - break; - -@@ -1107,14 +1110,37 @@ - case PPP_CCP: - /* peek at outbound CCP frames */ - ppp_ccp_peek(ppp, skb, 0); -+ /* -+ * When LZS or MPPE/MPPC has been negotiated we don't send -+ * CCP_RESETACK after receiving CCP_RESETREQ; in fact pppd -+ * sends such a packet but we silently discard it here -+ */ -+ if (CCP_CODE(skb->data+2) == CCP_RESETACK -+ && (ppp->xcomp->compress_proto == CI_MPPE -+ || ppp->xcomp->compress_proto == CI_LZS)) { -+ --ppp->stats.tx_packets; -+ ppp->stats.tx_bytes -= skb->len - 2; -+ kfree_skb(skb); -+ return; -+ } - break; - } - - /* try to do packet compression */ - if ((ppp->xstate & SC_COMP_RUN) && ppp->xc_state != 0 - && proto != PPP_LCP && proto != PPP_CCP) { -- new_skb = alloc_skb(ppp->dev->mtu + ppp->dev->hard_header_len, -- GFP_ATOMIC); -+ int comp_ovhd = 0; -+ /* -+ * because of possible data expansion when MPPC or LZS -+ * is used, allocate compressor's buffer 12.5% bigger -+ * than MTU -+ */ -+ if (ppp->xcomp->compress_proto == CI_MPPE) -+ comp_ovhd = ((ppp->dev->mtu * 9) / 8) + 1 + MPPE_OVHD; -+ else if (ppp->xcomp->compress_proto == CI_LZS) -+ comp_ovhd = ((ppp->dev->mtu * 9) / 8) + 1 + LZS_OVHD; -+ new_skb = alloc_skb(ppp->dev->mtu + ppp->dev->hard_header_len -+ + comp_ovhd, GFP_ATOMIC); - if (new_skb == 0) { - printk(KERN_ERR "PPP: no memory (comp pkt)\n"); - goto drop; -@@ -1132,9 +1158,21 @@ - skb = new_skb; - skb_put(skb, len); - skb_pull(skb, 2); /* pull off A/C bytes */ -- } else { -+ } else if (len == 0) { - /* didn't compress, or CCP not up yet */ - kfree_skb(new_skb); -+ } else { -+ /* -+ * (len < 0) -+ * MPPE requires that we do not send unencrypted -+ * frames. The compressor will return -1 if we -+ * should drop the frame. We cannot simply test -+ * the compress_proto because MPPE and MPPC share -+ * the same number. -+ */ -+ printk(KERN_ERR "ppp: compressor dropped pkt\n"); -+ kfree_skb(new_skb); -+ goto drop; - } - } - -@@ -1640,14 +1678,15 @@ - goto err; - - if (proto == PPP_COMP) { -- ns = dev_alloc_skb(ppp->mru + PPP_HDRLEN); -+ ns = dev_alloc_skb(ppp->mru_alloc + PPP_HDRLEN); - if (ns == 0) { - printk(KERN_ERR "ppp_decompress_frame: no memory\n"); - goto err; - } - /* the decompressor still expects the A/C bytes in the hdr */ - len = ppp->rcomp->decompress(ppp->rc_state, skb->data - 2, -- skb->len + 2, ns->data, ppp->mru + PPP_HDRLEN); -+ skb->len + 2, ns->data, -+ ppp->mru_alloc + PPP_HDRLEN); - if (len < 0) { - /* Pass the compressed frame to pppd as an - error indication. */ -@@ -1673,7 +1712,14 @@ - return skb; - - err: -- ppp->rstate |= SC_DC_ERROR; -+ if (ppp->rcomp->compress_proto != CI_MPPE -+ && ppp->rcomp->compress_proto != CI_LZS) { -+ /* -+ * If decompression protocol isn't MPPE/MPPC or LZS, we set -+ * SC_DC_ERROR flag and wait for CCP_RESETACK -+ */ -+ ppp->rstate |= SC_DC_ERROR; -+ } - ppp_receive_error(ppp); - return skb; - } -@@ -2349,6 +2395,7 @@ - memset(ppp, 0, sizeof(struct ppp)); - - ppp->mru = PPP_MRU; -+ ppp->mru_alloc = PPP_MRU; - init_ppp_file(&ppp->file, INTERFACE); - ppp->file.hdrlen = PPP_HDRLEN - 2; /* don't count proto bytes */ - for (i = 0; i < NUM_NP; ++i) -diff -ruN linux-2.6.12.orig/drivers/net/ppp_mppe_mppc.c linux-2.6.12/drivers/net/ppp_mppe_mppc.c ---- linux-2.6.12.orig/drivers/net/ppp_mppe_mppc.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.12/drivers/net/ppp_mppe_mppc.c 2005-06-28 20:07:01.000000000 +0200 -@@ -0,0 +1,1299 @@ -+/* -+ * ppp_mppe_mppc.c - MPPC/MPPE "compressor/decompressor" module. -+ * -+ * Copyright (c) 1994 Árpád Magosányi <mag@bunuel.tii.matav.hu> -+ * Copyright (c) 1999 Tim Hockin, Cobalt Networks Inc. <thockin@cobaltnet.com> -+ * Copyright (c) 2002-2004 Jan Dubiec <jdx@slackware.pl> -+ * -+ * Permission to use, copy, modify, and distribute this software and its -+ * documentation is hereby granted, provided that the above copyright -+ * notice appears in all copies. This software is provided without any -+ * warranty, express or implied. -+ * -+ * The code is based on MPPE kernel module written by Árpád Magosányi and -+ * Tim Hockin which can be found on http://planetmirror.com/pub/mppe/. -+ * I have added MPPC and 56 bit session keys support in MPPE. -+ * -+ * WARNING! Although this is open source code, its usage in some countries -+ * (in particular in the USA) may violate Stac Inc. patent for MPPC. -+ * -+ * ==FILEVERSION 20041123== -+ * -+ */ -+ -+#include <linux/init.h> -+#include <linux/module.h> -+#include <linux/mm.h> -+#include <linux/slab.h> -+#include <asm/scatterlist.h> -+#include <linux/vmalloc.h> -+#include <linux/crypto.h> -+ -+#include <linux/ppp_defs.h> -+#include <linux/ppp-comp.h> -+ -+/* -+ * State for a mppc/mppe "(de)compressor". -+ */ -+struct ppp_mppe_state { -+ struct crypto_tfm *arc4_tfm; -+ struct crypto_tfm *sha1_tfm; -+ u8 *sha1_digest; -+ u8 master_key[MPPE_MAX_KEY_LEN]; -+ u8 session_key[MPPE_MAX_KEY_LEN]; -+ u8 mppc; /* do we use compression (MPPC)? */ -+ u8 mppe; /* do we use encryption (MPPE)? */ -+ u8 keylen; /* key length in bytes */ -+ u8 bitkeylen; /* key length in bits */ -+ u16 ccount; /* coherency counter */ -+ u16 bits; /* MPPC/MPPE control bits */ -+ u8 stateless; /* do we use stateless mode? */ -+ u8 nextflushed; /* set A bit in the next outgoing packet; -+ used only by compressor*/ -+ u8 flushexpected; /* drop packets until A bit is received; -+ used only by decompressor*/ -+ u8 *hist; /* MPPC history */ -+ u16 *hash; /* Hash table; used only by compressor */ -+ u16 histptr; /* history "cursor" */ -+ int unit; -+ int debug; -+ int mru; -+ struct compstat stats; -+}; -+ -+#define MPPE_HIST_LEN 8192 /* MPPC history size */ -+#define MPPE_MAX_CCOUNT 0x0FFF /* max. coherency counter value */ -+ -+#define MPPE_BIT_FLUSHED 0x80 /* bit A */ -+#define MPPE_BIT_RESET 0x40 /* bit B */ -+#define MPPE_BIT_COMP 0x20 /* bit C */ -+#define MPPE_BIT_ENCRYPTED 0x10 /* bit D */ -+ -+#define MPPE_SALT0 0xD1 /* values used in MPPE key derivation */ -+#define MPPE_SALT1 0x26 /* according to RFC3079 */ -+#define MPPE_SALT2 0x9E -+ -+#define MPPE_CCOUNT(x) ((((x)[4] & 0x0f) << 8) + (x)[5]) -+#define MPPE_BITS(x) ((x)[4] & 0xf0) -+#define MPPE_CTRLHI(x) ((((x)->ccount & 0xf00)>>8)|((x)->bits)) -+#define MPPE_CTRLLO(x) ((x)->ccount & 0xff) -+ -+/* -+ * Kernel Crypto API needs its arguments to be in kmalloc'd memory, not in the -+ * module static data area. That means sha_pad needs to be kmalloc'd. It is done -+ * in mppe_module_init(). This has been pointed out on 30th July 2004 by Oleg -+ * Makarenko on pptpclient-devel mailing list. -+ */ -+#define SHA1_PAD_SIZE 40 -+struct sha_pad { -+ unsigned char sha_pad1[SHA1_PAD_SIZE]; -+ unsigned char sha_pad2[SHA1_PAD_SIZE]; -+}; -+static struct sha_pad *sha_pad; -+ -+static inline void -+setup_sg(struct scatterlist *sg, const void *address, unsigned int length) -+{ -+ sg[0].page = virt_to_page(address); -+ sg[0].offset = offset_in_page(address); -+ sg[0].length = length; -+} -+ -+static inline void -+arc4_setkey(struct ppp_mppe_state *state, const unsigned char *key, -+ const unsigned int keylen) -+{ -+ crypto_cipher_setkey(state->arc4_tfm, key, keylen); -+} -+ -+static inline void -+arc4_encrypt(struct ppp_mppe_state *state, const unsigned char *in, -+ const unsigned int len, unsigned char *out) -+{ -+ struct scatterlist sgin[4], sgout[4]; -+ -+ setup_sg(sgin, in, len); -+ setup_sg(sgout, out, len); -+ crypto_cipher_encrypt(state->arc4_tfm, sgout, sgin, len); -+} -+ -+#define arc4_decrypt arc4_encrypt -+ -+/* -+ * Key Derivation, from RFC 3078, RFC 3079. -+ * Equivalent to Get_Key() for MS-CHAP as described in RFC 3079. -+ */ -+static void -+get_new_key_from_sha(struct ppp_mppe_state *state, unsigned char *interim_key) -+{ -+ struct scatterlist sg[4]; -+ -+ setup_sg(&sg[0], state->master_key, state->keylen); -+ setup_sg(&sg[1], sha_pad->sha_pad1, sizeof(sha_pad->sha_pad1)); -+ setup_sg(&sg[2], state->session_key, state->keylen); -+ setup_sg(&sg[3], sha_pad->sha_pad2, sizeof(sha_pad->sha_pad2)); -+ -+ crypto_digest_digest (state->sha1_tfm, sg, 4, state->sha1_digest); -+ -+ memcpy(interim_key, state->sha1_digest, state->keylen); -+} -+ -+static void -+mppe_change_key(struct ppp_mppe_state *state, int initialize) -+{ -+ unsigned char interim_key[MPPE_MAX_KEY_LEN]; -+ -+ get_new_key_from_sha(state, interim_key); -+ if (initialize) { -+ memcpy(state->session_key, interim_key, state->keylen); -+ } else { -+ arc4_setkey(state, interim_key, state->keylen); -+ arc4_encrypt(state, interim_key, state->keylen, state->session_key); -+ } -+ if (state->keylen == 8) { -+ if (state->bitkeylen == 40) { -+ state->session_key[0] = MPPE_SALT0; -+ state->session_key[1] = MPPE_SALT1; -+ state->session_key[2] = MPPE_SALT2; -+ } else { -+ state->session_key[0] = MPPE_SALT0; -+ } -+ } -+ arc4_setkey(state, state->session_key, state->keylen); -+} -+ -+/* increase 12-bit coherency counter */ -+static inline void -+mppe_increase_ccount(struct ppp_mppe_state *state) -+{ -+ state->ccount = (state->ccount + 1) & MPPE_MAX_CCOUNT; -+ if (state->mppe) { -+ if (state->stateless) { -+ mppe_change_key(state, 0); -+ state->nextflushed = 1; -+ } else { -+ if ((state->ccount & 0xff) == 0xff) { -+ mppe_change_key(state, 0); -+ } -+ } -+ } -+} -+ -+/* allocate space for a MPPE/MPPC (de)compressor. */ -+/* comp != 0 -> init compressor */ -+/* comp = 0 -> init decompressor */ -+static void * -+mppe_alloc(unsigned char *options, int opt_len, int comp) -+{ -+ struct ppp_mppe_state *state; -+ unsigned int digestsize; -+ u8* fname; -+ -+ fname = comp ? "mppe_comp_alloc" : "mppe_decomp_alloc"; -+ -+ /* -+ * Hack warning - additionally to the standard MPPC/MPPE configuration -+ * options, pppd passes to the (de)copressor 8 or 16 byte session key. -+ * Therefore options[1] contains MPPC/MPPE configuration option length -+ * (CILEN_MPPE = 6), but the real options length, depending on the key -+ * length, is 6+8 or 6+16. -+ */ -+ if (opt_len < CILEN_MPPE) { -+ printk(KERN_WARNING "%s: wrong options length: %u\n", fname, opt_len); -+ return NULL; -+ } -+ -+ if (options[0] != CI_MPPE || options[1] != CILEN_MPPE || -+ (options[2] & ~MPPE_STATELESS) != 0 || -+ options[3] != 0 || options[4] != 0 || -+ (options[5] & ~(MPPE_128BIT|MPPE_56BIT|MPPE_40BIT|MPPE_MPPC)) != 0 || -+ (options[5] & (MPPE_128BIT|MPPE_56BIT|MPPE_40BIT|MPPE_MPPC)) == 0) { -+ printk(KERN_WARNING "%s: options rejected: o[0]=%02x, o[1]=%02x, " -+ "o[2]=%02x, o[3]=%02x, o[4]=%02x, o[5]=%02x\n", fname, options[0], -+ options[1], options[2], options[3], options[4], options[5]); -+ return NULL; -+ } -+ -+ state = (struct ppp_mppe_state *)kmalloc(sizeof(*state), GFP_KERNEL); -+ if (state == NULL) { -+ printk(KERN_ERR "%s: cannot allocate space for %scompressor\n", fname, -+ comp ? "" : "de"); -+ return NULL; -+ } -+ memset(state, 0, sizeof(struct ppp_mppe_state)); -+ -+ state->mppc = options[5] & MPPE_MPPC; /* Do we use MPPC? */ -+ state->mppe = options[5] & (MPPE_128BIT | MPPE_56BIT | -+ MPPE_40BIT); /* Do we use MPPE? */ -+ -+ if (state->mppc) { -+ /* allocate MPPC history */ -+ state->hist = (u8*)vmalloc(2*MPPE_HIST_LEN*sizeof(u8)); -+ if (state->hist == NULL) { -+ kfree(state); -+ printk(KERN_ERR "%s: cannot allocate space for MPPC history\n", -+ fname); -+ return NULL; -+ } -+ -+ /* allocate hashtable for MPPC compressor */ -+ if (comp) { -+ state->hash = (u16*)vmalloc(MPPE_HIST_LEN*sizeof(u16)); -+ if (state->hash == NULL) { -+ vfree(state->hist); -+ kfree(state); -+ printk(KERN_ERR "%s: cannot allocate space for MPPC history\n", -+ fname); -+ return NULL; -+ } -+ } -+ } -+ -+ if (state->mppe) { /* specific for MPPE */ -+ /* Load ARC4 algorithm */ -+ state->arc4_tfm = crypto_alloc_tfm("arc4", 0); -+ if (state->arc4_tfm == NULL) { -+ if (state->mppc) { -+ vfree(state->hash); -+ if (comp) -+ vfree(state->hist); -+ } -+ kfree(state); -+ printk(KERN_ERR "%s: cannot load ARC4 module\n", fname); -+ return NULL; -+ } -+ -+ /* Load SHA1 algorithm */ -+ state->sha1_tfm = crypto_alloc_tfm("sha1", 0); -+ if (state->sha1_tfm == NULL) { -+ crypto_free_tfm(state->arc4_tfm); -+ if (state->mppc) { -+ vfree(state->hash); -+ if (comp) -+ vfree(state->hist); -+ } -+ kfree(state); -+ printk(KERN_ERR "%s: cannot load SHA1 module\n", fname); -+ return NULL; -+ } -+ -+ digestsize = crypto_tfm_alg_digestsize(state->sha1_tfm); -+ if (digestsize < MPPE_MAX_KEY_LEN) { -+ crypto_free_tfm(state->sha1_tfm); -+ crypto_free_tfm(state->arc4_tfm); -+ if (state->mppc) { -+ vfree(state->hash); -+ if (comp) -+ vfree(state->hist); -+ } -+ kfree(state); -+ printk(KERN_ERR "%s: CryptoAPI SHA1 digest size too small\n", fname); -+ } -+ -+ state->sha1_digest = kmalloc(digestsize, GFP_KERNEL); -+ if (!state->sha1_digest) { -+ crypto_free_tfm(state->sha1_tfm); -+ crypto_free_tfm(state->arc4_tfm); -+ if (state->mppc) { -+ vfree(state->hash); -+ if (comp) -+ vfree(state->hist); -+ } -+ kfree(state); -+ printk(KERN_ERR "%s: cannot allocate space for SHA1 digest\n", fname); -+ } -+ -+ memcpy(state->master_key, options+CILEN_MPPE, MPPE_MAX_KEY_LEN); -+ memcpy(state->session_key, state->master_key, MPPE_MAX_KEY_LEN); -+ /* initial key generation is done in mppe_init() */ -+ } -+ -+ return (void *) state; -+} -+ -+static void * -+mppe_comp_alloc(unsigned char *options, int opt_len) -+{ -+ return mppe_alloc(options, opt_len, 1); -+} -+ -+static void * -+mppe_decomp_alloc(unsigned char *options, int opt_len) -+{ -+ return mppe_alloc(options, opt_len, 0); -+} -+ -+/* cleanup the (de)compressor */ -+static void -+mppe_comp_free(void *arg) -+{ -+ struct ppp_mppe_state *state = (struct ppp_mppe_state *) arg; -+ -+ if (state != NULL) { -+ if (state->mppe) { -+ if (state->sha1_digest != NULL) -+ kfree(state->sha1_digest); -+ if (state->sha1_tfm != NULL) -+ crypto_free_tfm(state->sha1_tfm); -+ if (state->arc4_tfm != NULL) -+ crypto_free_tfm(state->arc4_tfm); -+ } -+ if (state->hist != NULL) -+ vfree(state->hist); -+ if (state->hash != NULL) -+ vfree(state->hash); -+ kfree(state); -+ } -+} -+ -+/* init MPPC/MPPE (de)compresor */ -+/* comp != 0 -> init compressor */ -+/* comp = 0 -> init decompressor */ -+static int -+mppe_init(void *arg, unsigned char *options, int opt_len, int unit, -+ int hdrlen, int mru, int debug, int comp) -+{ -+ struct ppp_mppe_state *state = (struct ppp_mppe_state *) arg; -+ u8* fname; -+ -+ fname = comp ? "mppe_comp_init" : "mppe_decomp_init"; -+ -+ if (opt_len < CILEN_MPPE) { -+ if (debug) -+ printk(KERN_WARNING "%s: wrong options length: %u\n", -+ fname, opt_len); -+ return 0; -+ } -+ -+ if (options[0] != CI_MPPE || options[1] != CILEN_MPPE || -+ (options[2] & ~MPPE_STATELESS) != 0 || -+ options[3] != 0 || options[4] != 0 || -+ (options[5] & ~(MPPE_56BIT|MPPE_128BIT|MPPE_40BIT|MPPE_MPPC)) != 0 || -+ (options[5] & (MPPE_56BIT|MPPE_128BIT|MPPE_40BIT|MPPE_MPPC)) == 0) { -+ if (debug) -+ printk(KERN_WARNING "%s: options rejected: o[0]=%02x, o[1]=%02x, " -+ "o[2]=%02x, o[3]=%02x, o[4]=%02x, o[5]=%02x\n", fname, -+ options[0], options[1], options[2], options[3], options[4], -+ options[5]); -+ return 0; -+ } -+ -+ if ((options[5] & ~MPPE_MPPC) != MPPE_128BIT && -+ (options[5] & ~MPPE_MPPC) != MPPE_56BIT && -+ (options[5] & ~MPPE_MPPC) != MPPE_40BIT && -+ (options[5] & MPPE_MPPC) != MPPE_MPPC) { -+ if (debug) -+ printk(KERN_WARNING "%s: don't know what to do: o[5]=%02x\n", -+ fname, options[5]); -+ return 0; -+ } -+ -+ state->mppc = options[5] & MPPE_MPPC; /* Do we use MPPC? */ -+ state->mppe = options[5] & (MPPE_128BIT | MPPE_56BIT | -+ MPPE_40BIT); /* Do we use MPPE? */ -+ state->stateless = options[2] & MPPE_STATELESS; /* Do we use stateless mode? */ -+ -+ switch (state->mppe) { -+ case MPPE_40BIT: /* 40 bit key */ -+ state->keylen = 8; -+ state->bitkeylen = 40; -+ break; -+ case MPPE_56BIT: /* 56 bit key */ -+ state->keylen = 8; -+ state->bitkeylen = 56; -+ break; -+ case MPPE_128BIT: /* 128 bit key */ -+ state->keylen = 16; -+ state->bitkeylen = 128; -+ break; -+ default: -+ state->keylen = 0; -+ state->bitkeylen = 0; -+ } -+ -+ state->ccount = MPPE_MAX_CCOUNT; -+ state->bits = 0; -+ state->unit = unit; -+ state->debug = debug; -+ state->histptr = MPPE_HIST_LEN; -+ if (state->mppc) { /* reset history if MPPC was negotiated */ -+ memset(state->hist, 0, 2*MPPE_HIST_LEN*sizeof(u8)); -+ } -+ -+ if (state->mppe) { /* generate initial session keys */ -+ mppe_change_key(state, 1); -+ } -+ -+ if (comp) { /* specific for compressor */ -+ state->nextflushed = 1; -+ } else { /* specific for decompressor */ -+ state->mru = mru; -+ state->flushexpected = 1; -+ } -+ -+ return 1; -+} -+ -+static int -+mppe_comp_init(void *arg, unsigned char *options, int opt_len, int unit, -+ int hdrlen, int debug) -+{ -+ return mppe_init(arg, options, opt_len, unit, hdrlen, 0, debug, 1); -+} -+ -+ -+static int -+mppe_decomp_init(void *arg, unsigned char *options, int opt_len, int unit, -+ int hdrlen, int mru, int debug) -+{ -+ return mppe_init(arg, options, opt_len, unit, hdrlen, mru, debug, 0); -+} -+ -+static void -+mppe_comp_reset(void *arg) -+{ -+ struct ppp_mppe_state *state = (struct ppp_mppe_state *)arg; -+ -+ if (state->debug) -+ printk(KERN_DEBUG "%s%d: resetting MPPC/MPPE compressor\n", -+ __FUNCTION__, state->unit); -+ -+ state->nextflushed = 1; -+ if (state->mppe) -+ arc4_setkey(state, state->session_key, state->keylen); -+} -+ -+static void -+mppe_decomp_reset(void *arg) -+{ -+ /* When MPPC/MPPE is in use, we shouldn't receive any CCP Reset-Ack. -+ But when we receive such a packet, we just ignore it. */ -+ return; -+} -+ -+static void -+mppe_stats(void *arg, struct compstat *stats) -+{ -+ struct ppp_mppe_state *state = (struct ppp_mppe_state *)arg; -+ -+ *stats = state->stats; -+} -+ -+/***************************/ -+/**** Compression stuff ****/ -+/***************************/ -+/* inserts 1 to 8 bits into the output buffer */ -+static inline void putbits8(u8 *buf, u32 val, const u32 n, u32 *i, u32 *l) -+{ -+ buf += *i; -+ if (*l >= n) { -+ *l = (*l) - n; -+ val <<= *l; -+ *buf = *buf | (val & 0xff); -+ if (*l == 0) { -+ *l = 8; -+ (*i)++; -+ *(++buf) = 0; -+ } -+ } else { -+ (*i)++; -+ *l = 8 - n + (*l); -+ val <<= *l; -+ *buf = *buf | ((val >> 8) & 0xff); -+ *(++buf) = val & 0xff; -+ } -+} -+ -+/* inserts 9 to 16 bits into the output buffer */ -+static inline void putbits16(u8 *buf, u32 val, const u32 n, u32 *i, u32 *l) -+{ -+ buf += *i; -+ if (*l >= n - 8) { -+ (*i)++; -+ *l = 8 - n + (*l); -+ val <<= *l; -+ *buf = *buf | ((val >> 8) & 0xff); -+ *(++buf) = val & 0xff; -+ if (*l == 0) { -+ *l = 8; -+ (*i)++; -+ *(++buf) = 0; -+ } -+ } else { -+ (*i)++; (*i)++; -+ *l = 16 - n + (*l); -+ val <<= *l; -+ *buf = *buf | ((val >> 16) & 0xff); -+ *(++buf) = (val >> 8) & 0xff; -+ *(++buf) = val & 0xff; -+ } -+} -+ -+/* inserts 17 to 24 bits into the output buffer */ -+static inline void putbits24(u8 *buf, u32 val, const u32 n, u32 *i, u32 *l) -+{ -+ buf += *i; -+ if (*l >= n - 16) { -+ (*i)++; (*i)++; -+ *l = 16 - n + (*l); -+ val <<= *l; -+ *buf = *buf | ((val >> 16) & 0xff); -+ *(++buf) = (val >> 8) & 0xff; -+ *(++buf) = val & 0xff; -+ if (*l == 0) { -+ *l = 8; -+ (*i)++; -+ *(++buf) = 0; -+ } -+ } else { -+ (*i)++; (*i)++; (*i)++; -+ *l = 24 - n + (*l); -+ val <<= *l; -+ *buf = *buf | ((val >> 24) & 0xff); -+ *(++buf) = (val >> 16) & 0xff; -+ *(++buf) = (val >> 8) & 0xff; -+ *(++buf) = val & 0xff; -+ } -+} -+ -+static int -+mppc_compress(struct ppp_mppe_state *state, unsigned char *ibuf, -+ unsigned char *obuf, int isize, int osize) -+{ -+ u32 olen, off, len, idx, i, l; -+ u8 *hist, *sbuf, *p, *q, *r, *s; -+ -+ /* -+ At this point, to avoid possible buffer overflow caused by packet -+ expansion during/after compression, we should make sure that -+ osize >= (((isize*9)/8)+1)+2, but we don't do that because in -+ ppp_generic.c we simply allocate bigger obuf. -+ -+ Maximum MPPC packet expansion is 12.5%. This is the worst case when -+ all octets in the input buffer are >= 0x80 and we cannot find any -+ repeated tokens. Additionally we have to reserve 2 bytes for MPPE/MPPC -+ status bits and coherency counter. -+ */ -+ -+ hist = state->hist + MPPE_HIST_LEN; -+ /* check if there is enough room at the end of the history */ -+ if (state->histptr + isize >= 2*MPPE_HIST_LEN) { -+ state->bits |= MPPE_BIT_RESET; -+ state->histptr = MPPE_HIST_LEN; -+ memcpy(state->hist, hist, MPPE_HIST_LEN); -+ } -+ /* add packet to the history; isize must be <= MPPE_HIST_LEN */ -+ sbuf = state->hist + state->histptr; -+ memcpy(sbuf, ibuf, isize); -+ state->histptr += isize; -+ -+ /* compress data */ -+ r = sbuf + isize; -+ *obuf = olen = i = 0; -+ l = 8; -+ while (i < isize - 2) { -+ s = q = sbuf + i; -+ idx = ((40543*((((s[0]<<4)^s[1])<<4)^s[2]))>>4) & 0x1fff; -+ p = hist + state->hash[idx]; -+ state->hash[idx] = (u16) (s - hist); -+ off = s - p; -+ if (off > MPPE_HIST_LEN - 1 || off < 1 || *p++ != *s++ || *p++ != *s++ || -+ *p++ != *s++) { -+ /* no match found; encode literal byte */ -+ if (ibuf[i] < 0x80) { /* literal byte < 0x80 */ -+ putbits8(obuf, (u32) ibuf[i], 8, &olen, &l); -+ } else { /* literal byte >= 0x80 */ -+ putbits16(obuf, (u32) (0x100|(ibuf[i]&0x7f)), 9, &olen, &l); -+ } -+ ++i; -+ continue; -+ } -+ if (r - q >= 64) { -+ *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || -+ *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || -+ *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || -+ *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || -+ *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || -+ *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || -+ *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || -+ *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || -+ *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || -+ *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || -+ *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || -+ *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || -+ *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || -+ *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || -+ *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || -+ *p++ != *s++; -+ if (s - q == 64) { -+ p--; s--; -+ while((*p++ == *s++) && (s < r) && (p < q)); -+ } -+ } else { -+ while((*p++ == *s++) && (s < r) && (p < q)); -+ } -+ len = s - q - 1; -+ i += len; -+ -+ /* at least 3 character match found; code data */ -+ /* encode offset */ -+ if (off < 64) { /* 10-bit offset; 0 <= offset < 64 */ -+ putbits16(obuf, 0x3c0|off, 10, &olen, &l); -+ } else if (off < 320) { /* 12-bit offset; 64 <= offset < 320 */ -+ putbits16(obuf, 0xe00|(off-64), 12, &olen, &l); -+ } else if (off < 8192) { /* 16-bit offset; 320 <= offset < 8192 */ -+ putbits16(obuf, 0xc000|(off-320), 16, &olen, &l); -+ } else { -+ /* This shouldn't happen; we return 0 what means "packet expands", -+ and we send packet uncompressed. */ -+ if (state->debug) -+ printk(KERN_DEBUG "%s%d: wrong offset value: %d\n", -+ __FUNCTION__, state->unit, off); -+ return 0; -+ } -+ /* encode length of match */ -+ if (len < 4) { /* length = 3 */ -+ putbits8(obuf, 0, 1, &olen, &l); -+ } else if (len < 8) { /* 4 <= length < 8 */ -+ putbits8(obuf, 0x08|(len&0x03), 4, &olen, &l); -+ } else if (len < 16) { /* 8 <= length < 16 */ -+ putbits8(obuf, 0x30|(len&0x07), 6, &olen, &l); -+ } else if (len < 32) { /* 16 <= length < 32 */ -+ putbits8(obuf, 0xe0|(len&0x0f), 8, &olen, &l); -+ } else if (len < 64) { /* 32 <= length < 64 */ -+ putbits16(obuf, 0x3c0|(len&0x1f), 10, &olen, &l); -+ } else if (len < 128) { /* 64 <= length < 128 */ -+ putbits16(obuf, 0xf80|(len&0x3f), 12, &olen, &l); -+ } else if (len < 256) { /* 128 <= length < 256 */ -+ putbits16(obuf, 0x3f00|(len&0x7f), 14, &olen, &l); -+ } else if (len < 512) { /* 256 <= length < 512 */ -+ putbits16(obuf, 0xfe00|(len&0xff), 16, &olen, &l); -+ } else if (len < 1024) { /* 512 <= length < 1024 */ -+ putbits24(obuf, 0x3fc00|(len&0x1ff), 18, &olen, &l); -+ } else if (len < 2048) { /* 1024 <= length < 2048 */ -+ putbits24(obuf, 0xff800|(len&0x3ff), 20, &olen, &l); -+ } else if (len < 4096) { /* 2048 <= length < 4096 */ -+ putbits24(obuf, 0x3ff000|(len&0x7ff), 22, &olen, &l); -+ } else if (len < 8192) { /* 4096 <= length < 8192 */ -+ putbits24(obuf, 0xffe000|(len&0xfff), 24, &olen, &l); -+ } else { -+ /* This shouldn't happen; we return 0 what means "packet expands", -+ and send packet uncompressed. */ -+ if (state->debug) -+ printk(KERN_DEBUG "%s%d: wrong length of match value: %d\n", -+ __FUNCTION__, state->unit, len); -+ return 0; -+ } -+ } -+ -+ /* Add remaining octets to the output */ -+ while(isize - i > 0) { -+ if (ibuf[i] < 0x80) { /* literal byte < 0x80 */ -+ putbits8(obuf, (u32) ibuf[i++], 8, &olen, &l); -+ } else { /* literal byte >= 0x80 */ -+ putbits16(obuf, (u32) (0x100|(ibuf[i++]&0x7f)), 9, &olen, &l); -+ } -+ } -+ /* Reset unused bits of the last output octet */ -+ if ((l != 0) && (l != 8)) { -+ putbits8(obuf, 0, l, &olen, &l); -+ } -+ -+ return (int) olen; -+} -+ -+int -+mppe_compress(void *arg, unsigned char *ibuf, unsigned char *obuf, -+ int isize, int osize) -+{ -+ struct ppp_mppe_state *state = (struct ppp_mppe_state *) arg; -+ int proto, olen, complen, off; -+ unsigned char *wptr; -+ -+ /* Check that the protocol is in the range we handle. */ -+ proto = PPP_PROTOCOL(ibuf); -+ if (proto < 0x0021 || proto > 0x00fa) -+ return 0; -+ -+ wptr = obuf; -+ /* Copy over the PPP header */ -+ wptr[0] = PPP_ADDRESS(ibuf); -+ wptr[1] = PPP_CONTROL(ibuf); -+ wptr[2] = PPP_COMP >> 8; -+ wptr[3] = PPP_COMP; -+ wptr += PPP_HDRLEN + (MPPE_OVHD / 2); /* Leave two octets for MPPE/MPPC bits */ -+ -+ /* -+ * In ver. 0.99 protocol field was compressed. Deflate and BSD compress -+ * do PFC before actual compression, RCF2118 and RFC3078 are not precise -+ * on this topic so I decided to do PFC. Unfortunately this change caused -+ * incompatibility with older/other MPPE/MPPC modules. I have received -+ * a lot of complaints from unexperienced users so I have decided to revert -+ * to previous state, i.e. the protocol field is sent uncompressed now. -+ * Although this may be changed in the future. -+ * -+ * Receiving side (mppe_decompress()) still accepts packets with compressed -+ * and uncompressed protocol field so you shouldn't get "Unsupported protocol -+ * 0x2145 received" messages anymore. -+ */ -+ //off = (proto > 0xff) ? 2 : 3; /* PFC - skip first protocol byte if 0 */ -+ off = 2; -+ -+ ibuf += off; -+ -+ mppe_increase_ccount(state); -+ -+ if (state->nextflushed) { -+ state->bits |= MPPE_BIT_FLUSHED; -+ state->nextflushed = 0; -+ if (state->mppe && !state->stateless) { -+ /* -+ * If this is the flag packet, the key has been already changed in -+ * mppe_increase_ccount() so we dont't do it once again. -+ */ -+ if ((state->ccount & 0xff) != 0xff) { -+ arc4_setkey(state, state->session_key, state->keylen); -+ } -+ } -+ if (state->mppc) { /* reset history */ -+ state->bits |= MPPE_BIT_RESET; -+ state->histptr = MPPE_HIST_LEN; -+ memset(state->hist + MPPE_HIST_LEN, 0, MPPE_HIST_LEN*sizeof(u8)); -+ } -+ } -+ -+ if (state->mppc && !state->mppe) { /* Do only compression */ -+ complen = mppc_compress(state, ibuf, wptr, isize - off, -+ osize - PPP_HDRLEN - (MPPE_OVHD / 2)); -+ /* -+ * TODO: Implement an heuristics to handle packet expansion in a smart -+ * way. Now, when a packet expands, we send it as uncompressed and -+ * when next packet is sent we have to reset compressor's history. -+ * Maybe it would be better to send such packet as compressed in order -+ * to keep history's continuity. -+ */ -+ if ((complen > isize) || (complen > osize - PPP_HDRLEN) || -+ (complen == 0)) { -+ /* packet expands */ -+ state->nextflushed = 1; -+ memcpy(wptr, ibuf, isize - off); -+ olen = isize - (off - 2) + MPPE_OVHD; -+ (state->stats).inc_bytes += olen; -+ (state->stats).inc_packets++; -+ } else { -+ state->bits |= MPPE_BIT_COMP; -+ olen = complen + PPP_HDRLEN + (MPPE_OVHD / 2); -+ (state->stats).comp_bytes += olen; -+ (state->stats).comp_packets++; -+ } -+ } else { /* Do encryption with or without compression */ -+ state->bits |= MPPE_BIT_ENCRYPTED; -+ if (!state->mppc && state->mppe) { /* Do only encryption */ -+ /* read from ibuf, write to wptr, adjust for PPP_HDRLEN */ -+ arc4_encrypt(state, ibuf, isize - off, wptr); -+ olen = isize - (off - 2) + MPPE_OVHD; -+ (state->stats).inc_bytes += olen; -+ (state->stats).inc_packets++; -+ } else { /* Do compression and then encryption - RFC3078 */ -+ complen = mppc_compress(state, ibuf, wptr, isize - off, -+ osize - PPP_HDRLEN - (MPPE_OVHD / 2)); -+ /* -+ * TODO: Implement an heuristics to handle packet expansion in a smart -+ * way. Now, when a packet expands, we send it as uncompressed and -+ * when next packet is sent we have to reset compressor's history. -+ * Maybe it would be good to send such packet as compressed in order -+ * to keep history's continuity. -+ */ -+ if ((complen > isize) || (complen > osize - PPP_HDRLEN) || -+ (complen == 0)) { -+ /* packet expands */ -+ state->nextflushed = 1; -+ arc4_encrypt(state, ibuf, isize - off, wptr); -+ olen = isize - (off - 2) + MPPE_OVHD; -+ (state->stats).inc_bytes += olen; -+ (state->stats).inc_packets++; -+ } else { -+ state->bits |= MPPE_BIT_COMP; -+ /* Hack warning !!! RC4 implementation which we use does -+ encryption "in place" - it means that input and output -+ buffers can be *the same* memory area. Therefore we don't -+ need to use a temporary buffer. But be careful - other -+ implementations don't have to be so nice. -+ I used to use ibuf as temporary buffer here, but it led -+ packet sniffers into error. Thanks to Wilfried Weissmann -+ for pointing that. */ -+ arc4_encrypt(state, wptr, complen, wptr); -+ olen = complen + PPP_HDRLEN + (MPPE_OVHD / 2); -+ (state->stats).comp_bytes += olen; -+ (state->stats).comp_packets++; -+ } -+ } -+ } -+ -+ /* write status bits and coherency counter into the output buffer */ -+ wptr = obuf + PPP_HDRLEN; -+ wptr[0] = MPPE_CTRLHI(state); -+ wptr[1] = MPPE_CTRLLO(state); -+ -+ state->bits = 0; -+ -+ (state->stats).unc_bytes += isize; -+ (state->stats).unc_packets++; -+ -+ return olen; -+} -+ -+/***************************/ -+/*** Decompression stuff ***/ -+/***************************/ -+static inline u32 getbits(const u8 *buf, const u32 n, u32 *i, u32 *l) -+{ -+ static const u32 m[] = {0x00, 0x01, 0x03, 0x07, 0x0f, 0x1f, 0x3f, 0x7f, 0xff}; -+ u32 res, ol; -+ -+ ol = *l; -+ if (*l >= n) { -+ *l = (*l) - n; -+ res = (buf[*i] & m[ol]) >> (*l); -+ if (*l == 0) { -+ *l = 8; -+ (*i)++; -+ } -+ } else { -+ *l = 8 - n + (*l); -+ res = (buf[(*i)++] & m[ol]) << 8; -+ res = (res | buf[*i]) >> (*l); -+ } -+ -+ return res; -+} -+ -+static inline u32 getbyte(const u8 *buf, const u32 i, const u32 l) -+{ -+ if (l == 8) { -+ return buf[i]; -+ } else { -+ return (((buf[i] << 8) | buf[i+1]) >> l) & 0xff; -+ } -+} -+ -+static inline void lamecopy(u8 *dst, u8 *src, u32 len) -+{ -+ while (len--) -+ *dst++ = *src++; -+} -+ -+static int -+mppc_decompress(struct ppp_mppe_state *state, unsigned char *ibuf, -+ unsigned char *obuf, int isize, int osize) -+{ -+ u32 olen, off, len, bits, val, sig, i, l; -+ u8 *history, *s; -+ -+ history = state->hist + state->histptr; -+ olen = len = i = 0; -+ l = 8; -+ bits = isize * 8; -+ while (bits >= 8) { -+ val = getbyte(ibuf, i++, l); -+ if (val < 0x80) { /* literal byte < 0x80 */ -+ if (state->histptr < 2*MPPE_HIST_LEN) { -+ /* copy uncompressed byte to the history */ -+ (state->hist)[(state->histptr)++] = (u8) val; -+ } else { -+ /* buffer overflow; drop packet */ -+ if (state->debug) -+ printk(KERN_ERR "%s%d: trying to write outside history " -+ "buffer\n", __FUNCTION__, state->unit); -+ return DECOMP_ERROR; -+ } -+ olen++; -+ bits -= 8; -+ continue; -+ } -+ -+ sig = val & 0xc0; -+ if (sig == 0x80) { /* literal byte >= 0x80 */ -+ if (state->histptr < 2*MPPE_HIST_LEN) { -+ /* copy uncompressed byte to the history */ -+ (state->hist)[(state->histptr)++] = -+ (u8) (0x80|((val&0x3f)<<1)|getbits(ibuf, 1 , &i ,&l)); -+ } else { -+ /* buffer overflow; drop packet */ -+ if (state->debug) -+ printk(KERN_ERR "%s%d: trying to write outside history " -+ "buffer\n", __FUNCTION__, state->unit); -+ return DECOMP_ERROR; -+ } -+ olen++; -+ bits -= 9; -+ continue; -+ } -+ -+ /* Not a literal byte so it must be an (offset,length) pair */ -+ /* decode offset */ -+ sig = val & 0xf0; -+ if (sig == 0xf0) { /* 10-bit offset; 0 <= offset < 64 */ -+ off = (((val&0x0f)<<2)|getbits(ibuf, 2 , &i ,&l)); -+ bits -= 10; -+ } else { -+ if (sig == 0xe0) { /* 12-bit offset; 64 <= offset < 320 */ -+ off = ((((val&0x0f)<<4)|getbits(ibuf, 4 , &i ,&l))+64); -+ bits -= 12; -+ } else { -+ if ((sig&0xe0) == 0xc0) {/* 16-bit offset; 320 <= offset < 8192 */ -+ off = ((((val&0x1f)<<8)|getbyte(ibuf, i++, l))+320); -+ bits -= 16; -+ if (off > MPPE_HIST_LEN - 1) { -+ if (state->debug) -+ printk(KERN_DEBUG "%s%d: too big offset value: %d\n", -+ __FUNCTION__, state->unit, off); -+ return DECOMP_ERROR; -+ } -+ } else { /* this shouldn't happen */ -+ if (state->debug) -+ printk(KERN_DEBUG "%s%d: cannot decode offset value\n", -+ __FUNCTION__, state->unit); -+ return DECOMP_ERROR; -+ } -+ } -+ } -+ /* decode length of match */ -+ val = getbyte(ibuf, i, l); -+ if ((val & 0x80) == 0x00) { /* len = 3 */ -+ len = 3; -+ bits--; -+ getbits(ibuf, 1 , &i ,&l); -+ } else if ((val & 0xc0) == 0x80) { /* 4 <= len < 8 */ -+ len = 0x04 | ((val>>4) & 0x03); -+ bits -= 4; -+ getbits(ibuf, 4 , &i ,&l); -+ } else if ((val & 0xe0) == 0xc0) { /* 8 <= len < 16 */ -+ len = 0x08 | ((val>>2) & 0x07); -+ bits -= 6; -+ getbits(ibuf, 6 , &i ,&l); -+ } else if ((val & 0xf0) == 0xe0) { /* 16 <= len < 32 */ -+ len = 0x10 | (val & 0x0f); -+ bits -= 8; -+ i++; -+ } else { -+ bits -= 8; -+ val = (val << 8) | getbyte(ibuf, ++i, l); -+ if ((val & 0xf800) == 0xf000) { /* 32 <= len < 64 */ -+ len = 0x0020 | ((val >> 6) & 0x001f); -+ bits -= 2; -+ getbits(ibuf, 2 , &i ,&l); -+ } else if ((val & 0xfc00) == 0xf800) { /* 64 <= len < 128 */ -+ len = 0x0040 | ((val >> 4) & 0x003f); -+ bits -= 4; -+ getbits(ibuf, 4 , &i ,&l); -+ } else if ((val & 0xfe00) == 0xfc00) { /* 128 <= len < 256 */ -+ len = 0x0080 | ((val >> 2) & 0x007f); -+ bits -= 6; -+ getbits(ibuf, 6 , &i ,&l); -+ } else if ((val & 0xff00) == 0xfe00) { /* 256 <= len < 512 */ -+ len = 0x0100 | (val & 0x00ff); -+ bits -= 8; -+ i++; -+ } else { -+ bits -= 8; -+ val = (val << 8) | getbyte(ibuf, ++i, l); -+ if ((val & 0xff8000) == 0xff0000) { /* 512 <= len < 1024 */ -+ len = 0x000200 | ((val >> 6) & 0x0001ff); -+ bits -= 2; -+ getbits(ibuf, 2 , &i ,&l); -+ } else if ((val & 0xffc000) == 0xff8000) {/* 1024 <= len < 2048 */ -+ len = 0x000400 | ((val >> 4) & 0x0003ff); -+ bits -= 4; -+ getbits(ibuf, 4 , &i ,&l); -+ } else if ((val & 0xffe000) == 0xffc000) {/* 2048 <= len < 4096 */ -+ len = 0x000800 | ((val >> 2) & 0x0007ff); -+ bits -= 6; -+ getbits(ibuf, 6 , &i ,&l); -+ } else if ((val & 0xfff000) == 0xffe000) {/* 4096 <= len < 8192 */ -+ len = 0x001000 | (val & 0x000fff); -+ bits -= 8; -+ i++; -+ } else { /* this shouldn't happen */ -+ if (state->debug) -+ printk(KERN_DEBUG "%s%d: wrong length code: 0x%X\n", -+ __FUNCTION__, state->unit, val); -+ return DECOMP_ERROR; -+ } -+ } -+ } -+ s = state->hist + state->histptr; -+ state->histptr += len; -+ olen += len; -+ if (state->histptr < 2*MPPE_HIST_LEN) { -+ /* copy uncompressed bytes to the history */ -+ -+ /* In some cases len may be greater than off. It means that memory -+ * areas pointed by s and s-off overlap. I had used memmove() here -+ * because I thought that it acts as libc's version. Unfortunately, -+ * I was wrong. :-) I got strange errors sometimes. Wilfried suggested -+ * using of byte by byte copying here and strange errors disappeared. -+ */ -+ lamecopy(s, s - off, len); -+ } else { -+ /* buffer overflow; drop packet */ -+ if (state->debug) -+ printk(KERN_ERR "%s%d: trying to write outside history " -+ "buffer\n", __FUNCTION__, state->unit); -+ return DECOMP_ERROR; -+ } -+ } -+ -+ /* Do PFC decompression */ -+ len = olen; -+ if ((history[0] & 0x01) != 0) { -+ obuf[0] = 0; -+ obuf++; -+ len++; -+ } -+ -+ if (len <= osize) { -+ /* copy uncompressed packet to the output buffer */ -+ memcpy(obuf, history, olen); -+ } else { -+ /* buffer overflow; drop packet */ -+ if (state->debug) -+ printk(KERN_ERR "%s%d: too big uncompressed packet: %d\n", -+ __FUNCTION__, state->unit, len + (PPP_HDRLEN / 2)); -+ return DECOMP_ERROR; -+ } -+ -+ return (int) len; -+} -+ -+int -+mppe_decompress(void *arg, unsigned char *ibuf, int isize, -+ unsigned char *obuf, int osize) -+{ -+ struct ppp_mppe_state *state = (struct ppp_mppe_state *)arg; -+ int seq, bits, uncomplen; -+ -+ if (isize <= PPP_HDRLEN + MPPE_OVHD) { -+ if (state->debug) { -+ printk(KERN_DEBUG "%s%d: short packet (len=%d)\n", __FUNCTION__, -+ state->unit, isize); -+ } -+ return DECOMP_ERROR; -+ } -+ -+ /* Get coherency counter and control bits from input buffer */ -+ seq = MPPE_CCOUNT(ibuf); -+ bits = MPPE_BITS(ibuf); -+ -+ if (state->stateless) { -+ /* RFC 3078, sec 8.1. */ -+ mppe_increase_ccount(state); -+ if ((seq != state->ccount) && state->debug) -+ printk(KERN_DEBUG "%s%d: bad sequence number: %d, expected: %d\n", -+ __FUNCTION__, state->unit, seq, state->ccount); -+ while (seq != state->ccount) -+ mppe_increase_ccount(state); -+ } else { -+ /* RFC 3078, sec 8.2. */ -+ if (state->flushexpected) { /* discard state */ -+ if ((bits & MPPE_BIT_FLUSHED)) { /* we received expected FLUSH bit */ -+ while (seq != state->ccount) -+ mppe_increase_ccount(state); -+ state->flushexpected = 0; -+ } else /* drop packet*/ -+ return DECOMP_ERROR; -+ } else { /* normal state */ -+ mppe_increase_ccount(state); -+ if (seq != state->ccount) { -+ /* Packet loss detected, enter the discard state. */ -+ if (state->debug) -+ printk(KERN_DEBUG "%s%d: bad sequence number: %d, expected: %d\n", -+ __FUNCTION__, state->unit, seq, state->ccount); -+ state->flushexpected = 1; -+ return DECOMP_ERROR; -+ } -+ } -+ if (state->mppe && (bits & MPPE_BIT_FLUSHED)) { -+ arc4_setkey(state, state->session_key, state->keylen); -+ } -+ } -+ -+ if (state->mppc && (bits & (MPPE_BIT_FLUSHED | MPPE_BIT_RESET))) { -+ state->histptr = MPPE_HIST_LEN; -+ if ((bits & MPPE_BIT_FLUSHED)) { -+ memset(state->hist + MPPE_HIST_LEN, 0, MPPE_HIST_LEN*sizeof(u8)); -+ } else -+ if ((bits & MPPE_BIT_RESET)) { -+ memcpy(state->hist, state->hist + MPPE_HIST_LEN, MPPE_HIST_LEN); -+ } -+ } -+ -+ /* Fill in the first part of the PPP header. The protocol field -+ comes from the decompressed data. */ -+ obuf[0] = PPP_ADDRESS(ibuf); -+ obuf[1] = PPP_CONTROL(ibuf); -+ obuf += PPP_HDRLEN / 2; -+ -+ if (state->mppe) { /* process encrypted packet */ -+ if ((bits & MPPE_BIT_ENCRYPTED)) { -+ /* OK, packet encrypted, so decrypt it */ -+ if (state->mppc && (bits & MPPE_BIT_COMP)) { -+ /* Hack warning !!! RC4 implementation which we use does -+ decryption "in place" - it means that input and output -+ buffers can be *the same* memory area. Therefore we don't -+ need to use a temporary buffer. But be careful - other -+ implementations don't have to be so nice. */ -+ arc4_decrypt(state, ibuf + PPP_HDRLEN + (MPPE_OVHD / 2), isize - -+ PPP_HDRLEN - (MPPE_OVHD / 2), ibuf + PPP_HDRLEN + -+ (MPPE_OVHD / 2)); -+ uncomplen = mppc_decompress(state, ibuf + PPP_HDRLEN + -+ (MPPE_OVHD / 2), obuf, isize - -+ PPP_HDRLEN - (MPPE_OVHD / 2), -+ osize - (PPP_HDRLEN / 2)); -+ if (uncomplen == DECOMP_ERROR) { -+ state->flushexpected = 1; -+ return DECOMP_ERROR; -+ } -+ uncomplen += PPP_HDRLEN / 2; -+ (state->stats).comp_bytes += isize; -+ (state->stats).comp_packets++; -+ } else { -+ uncomplen = isize - MPPE_OVHD; -+ /* Decrypt the first byte in order to check if it is -+ compressed or uncompressed protocol field */ -+ arc4_decrypt(state, ibuf + PPP_HDRLEN + (MPPE_OVHD / 2), 1, obuf); -+ /* Do PFC decompression */ -+ if ((obuf[0] & 0x01) != 0) { -+ obuf[1] = obuf[0]; -+ obuf[0] = 0; -+ obuf++; -+ uncomplen++; -+ } -+ /* And finally, decrypt the rest of the frame. */ -+ arc4_decrypt(state, ibuf + PPP_HDRLEN + (MPPE_OVHD / 2) + 1, -+ isize - PPP_HDRLEN - (MPPE_OVHD / 2) - 1, obuf + 1); -+ (state->stats).inc_bytes += isize; -+ (state->stats).inc_packets++; -+ } -+ } else { /* this shouldn't happen */ -+ if (state->debug) -+ printk(KERN_ERR "%s%d: encryption negotiated but not an " -+ "encrypted packet received\n", __FUNCTION__, state->unit); -+ mppe_change_key(state, 0); -+ state->flushexpected = 1; -+ return DECOMP_ERROR; -+ } -+ } else { -+ if (state->mppc) { /* no MPPE, only MPPC */ -+ if ((bits & MPPE_BIT_COMP)) { -+ uncomplen = mppc_decompress(state, ibuf + PPP_HDRLEN + -+ (MPPE_OVHD / 2), obuf, isize - -+ PPP_HDRLEN - (MPPE_OVHD / 2), -+ osize - (PPP_HDRLEN / 2)); -+ if (uncomplen == DECOMP_ERROR) { -+ state->flushexpected = 1; -+ return DECOMP_ERROR; -+ } -+ uncomplen += PPP_HDRLEN / 2; -+ (state->stats).comp_bytes += isize; -+ (state->stats).comp_packets++; -+ } else { -+ memcpy(obuf, ibuf + PPP_HDRLEN + (MPPE_OVHD / 2), isize - -+ PPP_HDRLEN - (MPPE_OVHD / 2)); -+ uncomplen = isize - MPPE_OVHD; -+ (state->stats).inc_bytes += isize; -+ (state->stats).inc_packets++; -+ } -+ } else { /* this shouldn't happen */ -+ if (state->debug) -+ printk(KERN_ERR "%s%d: error - not an MPPC or MPPE frame " -+ "received\n", __FUNCTION__, state->unit); -+ state->flushexpected = 1; -+ return DECOMP_ERROR; -+ } -+ } -+ -+ (state->stats).unc_bytes += uncomplen; -+ (state->stats).unc_packets++; -+ -+ return uncomplen; -+} -+ -+ -+/************************************************************ -+ * Module interface table -+ ************************************************************/ -+ -+/* These are in ppp_generic.c */ -+extern int ppp_register_compressor (struct compressor *cp); -+extern void ppp_unregister_compressor (struct compressor *cp); -+ -+/* -+ * Functions exported to ppp_generic.c. -+ * -+ * In case of MPPC/MPPE there is no need to process incompressible data -+ * because such a data is sent in MPPC/MPPE frame. Therefore the (*incomp) -+ * callback function isn't needed. -+ */ -+struct compressor ppp_mppe = { -+ .compress_proto = CI_MPPE, -+ .comp_alloc = mppe_comp_alloc, -+ .comp_free = mppe_comp_free, -+ .comp_init = mppe_comp_init, -+ .comp_reset = mppe_comp_reset, -+ .compress = mppe_compress, -+ .comp_stat = mppe_stats, -+ .decomp_alloc = mppe_decomp_alloc, -+ .decomp_free = mppe_comp_free, -+ .decomp_init = mppe_decomp_init, -+ .decomp_reset = mppe_decomp_reset, -+ .decompress = mppe_decompress, -+ .incomp = NULL, -+ .decomp_stat = mppe_stats, -+ .owner = THIS_MODULE -+}; -+ -+/************************************************************ -+ * Module support routines -+ ************************************************************/ -+ -+int __init mppe_module_init(void) -+{ -+ int answer; -+ -+ if (!(crypto_alg_available("arc4", 0) && crypto_alg_available("sha1", 0))) { -+ printk(KERN_ERR "Kernel doesn't provide ARC4 and/or SHA1 algorithms " -+ "required by MPPE/MPPC. Check CryptoAPI configuration.\n"); -+ return -ENODEV; -+ } -+ -+ /* Allocate space for SHAPad1, SHAPad2 and ... */ -+ sha_pad = kmalloc(sizeof(struct sha_pad), GFP_KERNEL); -+ if (sha_pad == NULL) -+ return -ENOMEM; -+ /* ... initialize them */ -+ memset(sha_pad->sha_pad1, 0x00, sizeof(sha_pad->sha_pad1)); -+ memset(sha_pad->sha_pad2, 0xf2, sizeof(sha_pad->sha_pad2)); -+ -+ answer = ppp_register_compressor(&ppp_mppe); -+ if (answer == 0) { -+ printk(KERN_INFO "MPPE/MPPC encryption/compression module registered\n"); -+ } -+ return answer; -+} -+ -+void __exit mppe_module_cleanup(void) -+{ -+ kfree(sha_pad); -+ ppp_unregister_compressor(&ppp_mppe); -+ printk(KERN_INFO "MPPE/MPPC encryption/compression module unregistered\n"); -+} -+ -+module_init(mppe_module_init); -+module_exit(mppe_module_cleanup); -+ -+MODULE_AUTHOR("Jan Dubiec <jdx@slackware.pl>"); -+MODULE_DESCRIPTION("MPPE/MPPC encryption/compression module for Linux"); -+MODULE_VERSION("1.2"); -+MODULE_LICENSE("Dual BSD/GPL"); -+MODULE_ALIAS("ppp-compress-" __stringify(CI_MPPE)); -diff -ruN linux-2.6.12.orig/include/linux/ppp-comp.h linux-2.6.12/include/linux/ppp-comp.h ---- linux-2.6.12.orig/include/linux/ppp-comp.h 2004-12-24 22:33:47.000000000 +0100 -+++ linux-2.6.12/include/linux/ppp-comp.h 2005-06-28 20:07:01.000000000 +0200 -@@ -28,7 +28,7 @@ - */ - - /* -- * ==FILEVERSION 980319== -+ * ==FILEVERSION 20040509== - * - * NOTE TO MAINTAINERS: - * If you modify this file at all, please set the above date. -@@ -80,7 +80,7 @@ - - /* Compress a packet */ - int (*compress) (void *state, unsigned char *rptr, -- unsigned char *obuf, int isize, int osize); -+ unsigned char *obuf, int isize, int osize); - - /* Return compression statistics */ - void (*comp_stat) (void *state, struct compstat *stats); -@@ -101,7 +101,7 @@ - - /* Decompress a packet. */ - int (*decompress) (void *state, unsigned char *ibuf, int isize, -- unsigned char *obuf, int osize); -+ unsigned char *obuf, int osize); - - /* Update state for an incompressible packet received */ - void (*incomp) (void *state, unsigned char *ibuf, int icnt); -@@ -191,6 +191,42 @@ - #define DEFLATE_CHK_SEQUENCE 0 - - /* -+ * Definitions for MPPE/MPPC. -+ */ -+ -+#define CI_MPPE 18 /* config option for MPPE */ -+#define CILEN_MPPE 6 /* length of config option */ -+ -+#define MPPE_OVHD 4 /* MPPE overhead */ -+#define MPPE_MAX_KEY_LEN 16 /* largest key length (128-bit) */ -+ -+#define MPPE_STATELESS 0x01 /* configuration bit H */ -+#define MPPE_40BIT 0x20 /* configuration bit L */ -+#define MPPE_56BIT 0x80 /* configuration bit M */ -+#define MPPE_128BIT 0x40 /* configuration bit S */ -+#define MPPE_MPPC 0x01 /* configuration bit C */ -+ -+/* -+ * Definitions for Stac LZS. -+ */ -+ -+#define CI_LZS 17 /* config option for Stac LZS */ -+#define CILEN_LZS 5 /* length of config option */ -+ -+#define LZS_OVHD 4 /* max. LZS overhead */ -+#define LZS_HIST_LEN 2048 /* LZS history size */ -+#define LZS_MAX_CCOUNT 0x0FFF /* max. coherency counter value */ -+ -+#define LZS_MODE_NONE 0 -+#define LZS_MODE_LCB 1 -+#define LZS_MODE_CRC 2 -+#define LZS_MODE_SEQ 3 -+#define LZS_MODE_EXT 4 -+ -+#define LZS_EXT_BIT_FLUSHED 0x80 /* bit A */ -+#define LZS_EXT_BIT_COMP 0x20 /* bit C */ -+ -+/* - * Definitions for other, as yet unsupported, compression methods. - */ - diff --git a/packages/linux/linux-dht-walnut-2.6.12/ppc_40x_uboot.patch b/packages/linux/linux-dht-walnut-2.6.12/ppc_40x_uboot.patch deleted file mode 100644 index fcb700c5b4..0000000000 --- a/packages/linux/linux-dht-walnut-2.6.12/ppc_40x_uboot.patch +++ /dev/null @@ -1,693 +0,0 @@ -diff-tree 3e9e7c1d0b7a36fb8affb973a054c5098e27baa8 (from 90eb2665841d7b444602736e2141a01c948f75b1)
-Author: Matt Porter <mporter@kernel.crashing.org>
-Date: Mon Nov 7 00:58:15 2005 -0800
-
- [PATCH] ppc32: cleanup AMCC PPC40x eval boards to support U-Boot
-
- Cleanup PPC40x eval boards (bubinga, walnut and sycamore) to support U-Boot
- as bootloader. The OpenBIOS bd_info struct is not used in the kernel
- anymore (only U-Boot now).
-
- uImage (U-Boot) tested on walnut, sycamore and bubinga
- zImage (OpenBIOS) tested on sycamore, bubinga and ebony
-
- Signed-off-by: Stefan Roese <sr@denx.de>
- Signed-off-by: Matt Porter <mporter@kernel.crashing.org>
- Signed-off-by: Andrew Morton <akpm@osdl.org>
- Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
-diff --git a/arch/ppc/boot/simple/Makefile b/arch/ppc/boot/simple/Makefile
-index ff0904e..82df88b 100644
---- a/arch/ppc/boot/simple/Makefile
-+++ b/arch/ppc/boot/simple/Makefile
-@@ -67,6 +67,12 @@ zimageinitrd-$(CONFIG_BAMBOO) := zImage
- entrypoint-$(CONFIG_BAMBOO) := 0x01000000
- extra.o-$(CONFIG_BAMBOO) := pibs.o
-
-+ zimage-$(CONFIG_BUBINGA) := zImage-TREE
-+zimageinitrd-$(CONFIG_BUBINGA) := zImage.initrd-TREE
-+ end-$(CONFIG_BUBINGA) := bubinga
-+ entrypoint-$(CONFIG_BUBINGA) := 0x01000000
-+ extra.o-$(CONFIG_BUBINGA) := openbios.o
-+
- zimage-$(CONFIG_EBONY) := zImage-TREE
- zimageinitrd-$(CONFIG_EBONY) := zImage.initrd-TREE
- end-$(CONFIG_EBONY) := ebony
-@@ -91,6 +97,18 @@ zimageinitrd-$(CONFIG_OCOTEA) := zImage
- entrypoint-$(CONFIG_OCOTEA) := 0x01000000
- extra.o-$(CONFIG_OCOTEA) := pibs.o
-
-+ zimage-$(CONFIG_SYCAMORE) := zImage-TREE
-+zimageinitrd-$(CONFIG_SYCAMORE) := zImage.initrd-TREE
-+ end-$(CONFIG_SYCAMORE) := sycamore
-+ entrypoint-$(CONFIG_SYCAMORE) := 0x01000000
-+ extra.o-$(CONFIG_SYCAMORE) := openbios.o
-+
-+ zimage-$(CONFIG_WALNUT) := zImage-TREE
-+zimageinitrd-$(CONFIG_WALNUT) := zImage.initrd-TREE
-+ end-$(CONFIG_WALNUT) := walnut
-+ entrypoint-$(CONFIG_WALNUT) := 0x01000000
-+ extra.o-$(CONFIG_WALNUT) := openbios.o
-+
- extra.o-$(CONFIG_EV64260) := misc-ev64260.o
- end-$(CONFIG_EV64260) := ev64260
- cacheflag-$(CONFIG_EV64260) := -include $(clear_L2_L3)
-@@ -168,7 +186,8 @@ OBJCOPY_ARGS := -O elf32-powerpc
-
- # head.o and relocate.o must be at the start.
- boot-y := head.o relocate.o $(extra.o-y) $(misc-y)
--boot-$(CONFIG_40x) += embed_config.o
-+boot-$(CONFIG_REDWOOD_5) += embed_config.o
-+boot-$(CONFIG_REDWOOD_6) += embed_config.o
- boot-$(CONFIG_8xx) += embed_config.o
- boot-$(CONFIG_8260) += embed_config.o
- boot-$(CONFIG_BSEIP) += iic.o
-diff --git a/arch/ppc/boot/simple/misc.c b/arch/ppc/boot/simple/misc.c
-index e02de5b..f415d6c 100644
---- a/arch/ppc/boot/simple/misc.c
-+++ b/arch/ppc/boot/simple/misc.c
-@@ -23,7 +23,7 @@
- #include <asm/page.h>
- #include <asm/mmu.h>
- #include <asm/bootinfo.h>
--#ifdef CONFIG_44x
-+#ifdef CONFIG_4xx
- #include <asm/ibm4xx.h>
- #endif
- #include <asm/reg.h>
-@@ -88,6 +88,14 @@ get_mem_size(void)
- return 0;
- }
-
-+#if defined(CONFIG_40x)
-+#define PPC4xx_EMAC0_MR0 EMAC0_BASE
-+#endif
-+
-+#if defined(CONFIG_44x) && defined(PPC44x_EMAC0_MR0)
-+#define PPC4xx_EMAC0_MR0 PPC44x_EMAC0_MR0
-+#endif
-+
- struct bi_record *
- decompress_kernel(unsigned long load_addr, int num_words, unsigned long cksum)
- {
-@@ -103,13 +111,13 @@ decompress_kernel(unsigned long load_add
- com_port = serial_init(0, NULL);
- #endif
-
--#if defined(CONFIG_44x) && defined(PPC44x_EMAC0_MR0)
-+#if defined(PPC4xx_EMAC0_MR0)
- /* Reset MAL */
- mtdcr(DCRN_MALCR(DCRN_MAL_BASE), MALCR_MMSR);
- /* Wait for reset */
- while (mfdcr(DCRN_MALCR(DCRN_MAL_BASE)) & MALCR_MMSR) {};
- /* Reset EMAC */
-- *(volatile unsigned long *)PPC44x_EMAC0_MR0 = 0x20000000;
-+ *(volatile unsigned long *)PPC4xx_EMAC0_MR0 = 0x20000000;
- __asm__ __volatile__("eieio");
- #endif
-
-@@ -164,7 +172,9 @@ decompress_kernel(unsigned long load_add
- puts(" "); puthex((unsigned long)(&__ramdisk_end));puts("\n");
- }
-
-+#ifndef CONFIG_40x /* don't overwrite the 40x image located at 0x00400000! */
- avail_ram = (char *)0x00400000;
-+#endif
- end_avail = (char *)0x00800000;
- puts("avail ram: "); puthex((unsigned long)avail_ram); puts(" ");
- puthex((unsigned long)end_avail); puts("\n");
-diff --git a/arch/ppc/boot/simple/openbios.c b/arch/ppc/boot/simple/openbios.c
-index c732b6d..81f11d8 100644
---- a/arch/ppc/boot/simple/openbios.c
-+++ b/arch/ppc/boot/simple/openbios.c
-@@ -1,19 +1,43 @@
- /*
- * arch/ppc/boot/simple/openbios.c
- *
-- * 2005 (c) SYSGO AG - g.jaeger@sysgo.com
-+ * Copyright (c) 2005 DENX Software Engineering
-+ * Stefan Roese <sr@denx.de>
-+ *
-+ * Based on original work by
-+ * 2005 (c) SYSGO AG - g.jaeger@sysgo.com
-+ *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without
- * any warranty of any kind, whether express or implied.
- *
-- * Derived from arch/ppc/boot/simple/pibs.c (from MontaVista)
- */
-
- #include <linux/types.h>
- #include <linux/config.h>
- #include <linux/string.h>
- #include <asm/ppcboot.h>
--#include <platforms/4xx/ebony.h>
-+#include <asm/ibm4xx.h>
-+#include <asm/reg.h>
-+#ifdef CONFIG_40x
-+#include <asm/io.h>
-+#endif
-+
-+#if defined(CONFIG_BUBINGA)
-+#define BOARD_INFO_VECTOR 0xFFF80B50 /* openbios 1.19 moved this vector down - armin */
-+#else
-+#define BOARD_INFO_VECTOR 0xFFFE0B50
-+#endif
-+
-+#ifdef CONFIG_40x
-+/* Supply a default Ethernet address for those eval boards that don't
-+ * ship with one. This is an address from the MBX board I have, so
-+ * it is unlikely you will find it on your network.
-+ */
-+static ushort def_enet_addr[] = { 0x0800, 0x3e26, 0x1559 };
-+
-+extern unsigned long timebase_period_ns;
-+#endif /* CONFIG_40x */
-
- extern unsigned long decompress_kernel(unsigned long load_addr, int num_words,
- unsigned long cksum);
-@@ -23,15 +47,85 @@ extern unsigned long decompress_kernel(u
- bd_t hold_resid_buf __attribute__ ((__section__ (".data.boot")));
- bd_t *hold_residual = &hold_resid_buf;
-
-+typedef struct openbios_board_info {
-+ unsigned char bi_s_version[4]; /* Version of this structure */
-+ unsigned char bi_r_version[30]; /* Version of the IBM ROM */
-+ unsigned int bi_memsize; /* DRAM installed, in bytes */
-+#ifdef CONFIG_405EP
-+ unsigned char bi_enetaddr[2][6]; /* Local Ethernet MAC address */
-+#else /* CONFIG_405EP */
-+ unsigned char bi_enetaddr[6]; /* Local Ethernet MAC address */
-+#endif /* CONFIG_405EP */
-+ unsigned char bi_pci_enetaddr[6]; /* PCI Ethernet MAC address */
-+ unsigned int bi_intfreq; /* Processor speed, in Hz */
-+ unsigned int bi_busfreq; /* PLB Bus speed, in Hz */
-+ unsigned int bi_pci_busfreq; /* PCI Bus speed, in Hz */
-+#ifdef CONFIG_405EP
-+ unsigned int bi_opb_busfreq; /* OPB Bus speed, in Hz */
-+ unsigned int bi_pllouta_freq; /* PLL OUTA speed, in Hz */
-+#endif /* CONFIG_405EP */
-+} openbios_bd_t;
-+
- void *
- load_kernel(unsigned long load_addr, int num_words, unsigned long cksum,
- void *ign1, void *ign2)
- {
-- decompress_kernel(load_addr, num_words, cksum);
-+#ifdef CONFIG_40x
-+ openbios_bd_t *openbios_bd = NULL;
-+ openbios_bd_t *(*get_board_info)(void) =
-+ (openbios_bd_t *(*)(void))(*(unsigned long *)BOARD_INFO_VECTOR);
-+
-+ /*
-+ * On 40x platforms we not only need the MAC-addresses, but also the
-+ * clocks and memsize. Now try to get all values using the OpenBIOS
-+ * "get_board_info()" callback.
-+ */
-+ if ((openbios_bd = get_board_info()) != NULL) {
-+ /*
-+ * Copy bd_info from OpenBIOS struct into U-Boot struct
-+ * used by kernel
-+ */
-+ hold_residual->bi_memsize = openbios_bd->bi_memsize;
-+ hold_residual->bi_intfreq = openbios_bd->bi_intfreq;
-+ hold_residual->bi_busfreq = openbios_bd->bi_busfreq;
-+ hold_residual->bi_pci_busfreq = openbios_bd->bi_pci_busfreq;
-+ memcpy(hold_residual->bi_pci_enetaddr, openbios_bd->bi_pci_enetaddr, 6);
-+#ifdef CONFIG_405EP
-+ memcpy(hold_residual->bi_enetaddr, openbios_bd->bi_enetaddr[0], 6);
-+ memcpy(hold_residual->bi_enet1addr, openbios_bd->bi_enetaddr[1], 6);
-+ hold_residual->bi_opbfreq = openbios_bd->bi_opb_busfreq;
-+ hold_residual->bi_procfreq = openbios_bd->bi_pllouta_freq;
-+#else /* CONFIG_405EP */
-+ memcpy(hold_residual->bi_enetaddr, openbios_bd->bi_enetaddr, 6);
-+#endif /* CONFIG_405EP */
-+ } else {
-+ /* Hmmm...better try to stuff some defaults.
-+ */
-+ hold_residual->bi_memsize = 16 * 1024 * 1024;
-+ hold_residual->bi_intfreq = 200000000;
-+ hold_residual->bi_busfreq = 100000000;
-+ hold_residual->bi_pci_busfreq = 66666666;
-+
-+ /*
-+ * Only supply one mac-address in this fallback
-+ */
-+ memcpy(hold_residual->bi_enetaddr, (void *)def_enet_addr, 6);
-+#ifdef CONFIG_405EP
-+ hold_residual->bi_opbfreq = 50000000;
-+ hold_residual->bi_procfreq = 200000000;
-+#endif /* CONFIG_405EP */
-+ }
-+
-+ timebase_period_ns = 1000000000 / hold_residual->bi_intfreq;
-+#endif /* CONFIG_40x */
-
-+#ifdef CONFIG_440GP
- /* simply copy the MAC addresses */
-- memcpy(hold_residual->bi_enetaddr, (char *)EBONY_OPENBIOS_MAC_BASE, 6);
-- memcpy(hold_residual->bi_enet1addr, (char *)(EBONY_OPENBIOS_MAC_BASE+EBONY_OPENBIOS_MAC_OFFSET), 6);
-+ memcpy(hold_residual->bi_enetaddr, (char *)OPENBIOS_MAC_BASE, 6);
-+ memcpy(hold_residual->bi_enet1addr, (char *)(OPENBIOS_MAC_BASE+OPENBIOS_MAC_OFFSET), 6);
-+#endif /* CONFIG_440GP */
-+
-+ decompress_kernel(load_addr, num_words, cksum);
-
- return (void *)hold_residual;
- }
-diff --git a/arch/ppc/platforms/4xx/Kconfig b/arch/ppc/platforms/4xx/Kconfig
-index e70e4c6..d883791 100644
---- a/arch/ppc/platforms/4xx/Kconfig
-+++ b/arch/ppc/platforms/4xx/Kconfig
-@@ -225,7 +225,7 @@ config EMBEDDEDBOOT
-
- config IBM_OPENBIOS
- bool
-- depends on ASH || BUBINGA || REDWOOD_5 || REDWOOD_6 || SYCAMORE || WALNUT
-+ depends on ASH || REDWOOD_5 || REDWOOD_6
- default y
-
- config PPC4xx_DMA
-diff --git a/arch/ppc/platforms/4xx/bubinga.c b/arch/ppc/platforms/4xx/bubinga.c
-index 3678abf..8110f55 100644
---- a/arch/ppc/platforms/4xx/bubinga.c
-+++ b/arch/ppc/platforms/4xx/bubinga.c
-@@ -89,7 +89,7 @@ bubinga_early_serial_map(void)
- * by 16.
- */
- uart_div = (mfdcr(DCRN_CPC0_UCR_BASE) & DCRN_CPC0_UCR_U0DIV);
-- uart_clock = __res.bi_pllouta_freq / uart_div;
-+ uart_clock = __res.bi_procfreq / uart_div;
-
- /* Setup serial port access */
- memset(&port, 0, sizeof(port));
-diff --git a/arch/ppc/platforms/4xx/bubinga.h b/arch/ppc/platforms/4xx/bubinga.h
-index b1df856..b5380cf 100644
---- a/arch/ppc/platforms/4xx/bubinga.h
-+++ b/arch/ppc/platforms/4xx/bubinga.h
-@@ -1,52 +1,34 @@
- /*
-- * Support for IBM PPC 405EP evaluation board (Bubinga).
-+ * arch/ppc/platforms/4xx/bubinga.h
- *
-- * Author: SAW (IBM), derived from walnut.h.
-- * Maintained by MontaVista Software <source@mvista.com>
-+ * Bubinga board definitions
-+ *
-+ * Copyright (c) 2005 DENX Software Engineering
-+ * Stefan Roese <sr@denx.de>
-+ *
-+ * Based on original work by
-+ * SAW (IBM)
-+ * 2003 (c) MontaVista Softare Inc.
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
- *
-- * 2003 (c) MontaVista Softare Inc. This file is licensed under the
-- * terms of the GNU General Public License version 2. This program is
-- * licensed "as is" without any warranty of any kind, whether express
-- * or implied.
- */
-
- #ifdef __KERNEL__
- #ifndef __BUBINGA_H__
- #define __BUBINGA_H__
-
--/* 405EP */
-+#include <linux/config.h>
- #include <platforms/4xx/ibm405ep.h>
--
--#ifndef __ASSEMBLY__
--/*
-- * Data structure defining board information maintained by the boot
-- * ROM on IBM's evaluation board. An effort has been made to
-- * keep the field names consistent with the 8xx 'bd_t' board info
-- * structures.
-- */
--
--typedef struct board_info {
-- unsigned char bi_s_version[4]; /* Version of this structure */
-- unsigned char bi_r_version[30]; /* Version of the IBM ROM */
-- unsigned int bi_memsize; /* DRAM installed, in bytes */
-- unsigned char bi_enetaddr[2][6]; /* Local Ethernet MAC address */ unsigned char bi_pci_enetaddr[6]; /* PCI Ethernet MAC address */
-- unsigned int bi_intfreq; /* Processor speed, in Hz */
-- unsigned int bi_busfreq; /* PLB Bus speed, in Hz */
-- unsigned int bi_pci_busfreq; /* PCI Bus speed, in Hz */
-- unsigned int bi_opb_busfreq; /* OPB Bus speed, in Hz */
-- unsigned int bi_pllouta_freq; /* PLL OUTA speed, in Hz */
--} bd_t;
--
--/* Some 4xx parts use a different timebase frequency from the internal clock.
--*/
--#define bi_tbfreq bi_intfreq
--
-+#include <asm/ppcboot.h>
-
- /* Memory map for the Bubinga board.
- * Generic 4xx plus RTC.
- */
-
--extern void *bubinga_rtc_base;
- #define BUBINGA_RTC_PADDR ((uint)0xf0000000)
- #define BUBINGA_RTC_VADDR BUBINGA_RTC_PADDR
- #define BUBINGA_RTC_SIZE ((uint)8*1024)
-@@ -58,12 +40,18 @@ extern void *bubinga_rtc_base;
- * for typical configurations at various CPU speeds.
- * The base baud is calculated as (FWDA / EXT UART DIV / 16)
- */
--#define BASE_BAUD 0
-+#define BASE_BAUD 0
-
--#define BUBINGA_FPGA_BASE 0xF0300000
-+/* Flash */
-+#define PPC40x_FPGA_BASE 0xF0300000
-+#define PPC40x_FPGA_REG_OFFS 1 /* offset to flash map reg */
-+#define PPC40x_FLASH_ONBD_N(x) (x & 0x02)
-+#define PPC40x_FLASH_SRAM_SEL(x) (x & 0x01)
-+#define PPC40x_FLASH_LOW 0xFFF00000
-+#define PPC40x_FLASH_HIGH 0xFFF80000
-+#define PPC40x_FLASH_SIZE 0x80000
-
--#define PPC4xx_MACHINE_NAME "IBM Bubinga"
-+#define PPC4xx_MACHINE_NAME "IBM Bubinga"
-
--#endif /* !__ASSEMBLY__ */
- #endif /* __BUBINGA_H__ */
- #endif /* __KERNEL__ */
-diff --git a/arch/ppc/platforms/4xx/ebony.h b/arch/ppc/platforms/4xx/ebony.h
-index d08faa4..b91ad42 100644
---- a/arch/ppc/platforms/4xx/ebony.h
-+++ b/arch/ppc/platforms/4xx/ebony.h
-@@ -24,8 +24,8 @@
- #define PPC44x_EMAC0_MR0 0xE0000800
-
- /* Where to find the MAC info */
--#define EBONY_OPENBIOS_MAC_BASE 0xfffffe0c
--#define EBONY_OPENBIOS_MAC_OFFSET 0x0c
-+#define OPENBIOS_MAC_BASE 0xfffffe0c
-+#define OPENBIOS_MAC_OFFSET 0x0c
-
- /* Default clock rates for Rev. B and Rev. C silicon */
- #define EBONY_440GP_RB_SYSCLK 33000000
-diff --git a/arch/ppc/platforms/4xx/sycamore.c b/arch/ppc/platforms/4xx/sycamore.c
-index d8019ee..281b4a2 100644
---- a/arch/ppc/platforms/4xx/sycamore.c
-+++ b/arch/ppc/platforms/4xx/sycamore.c
-@@ -88,9 +88,6 @@ ppc405_map_irq(struct pci_dev *dev, unsi
- void __init
- sycamore_setup_arch(void)
- {
--#define SYCAMORE_PS2_BASE 0xF0100000
--#define SYCAMORE_FPGA_BASE 0xF0300000
--
- void *fpga_brdc;
- unsigned char fpga_brdc_data;
- void *fpga_enable;
-@@ -100,7 +97,7 @@ sycamore_setup_arch(void)
-
- ppc4xx_setup_arch();
-
-- ibm_ocp_set_emac(0, 1);
-+ ibm_ocp_set_emac(0, 0);
-
- kb_data = ioremap(SYCAMORE_PS2_BASE, 8);
- if (!kb_data) {
-@@ -111,7 +108,7 @@ sycamore_setup_arch(void)
-
- kb_cs = kb_data + 1;
-
-- fpga_status = ioremap(SYCAMORE_FPGA_BASE, 8);
-+ fpga_status = ioremap(PPC40x_FPGA_BASE, 8);
- if (!fpga_status) {
- printk(KERN_CRIT
- "sycamore_setup_arch() fpga_status ioremap failed\n");
-diff --git a/arch/ppc/platforms/4xx/sycamore.h b/arch/ppc/platforms/4xx/sycamore.h
-index 3e7b4e2..1cd6c82 100644
---- a/arch/ppc/platforms/4xx/sycamore.h
-+++ b/arch/ppc/platforms/4xx/sycamore.h
-@@ -1,67 +1,52 @@
- /*
- * arch/ppc/platforms/4xx/sycamore.h
- *
-- * Macros, definitions, and data structures specific to the IBM PowerPC
-- * 405GPr "Sycamore" evaluation board.
-+ * Sycamore board definitions
- *
-- * Author: Armin Kuster <akuster@mvista.com>
-+ * Copyright (c) 2005 DENX Software Engineering
-+ * Stefan Roese <sr@denx.de>
-+ *
-+ * Based on original work by
-+ * Armin Kuster <akuster@mvista.com>
-+ * 2000 (c) MontaVista, Software, Inc.
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
- *
-- * 2000 (c) MontaVista, Software, Inc. This file is licensed under
-- * the terms of the GNU General Public License version 2. This program
-- * is licensed "as is" without any warranty of any kind, whether express
-- * or implied.
- */
-
- #ifdef __KERNEL__
- #ifndef __ASM_SYCAMORE_H__
- #define __ASM_SYCAMORE_H__
-
-+#include <linux/config.h>
- #include <platforms/4xx/ibm405gpr.h>
-+#include <asm/ppcboot.h>
-
--#ifndef __ASSEMBLY__
--/*
-- * Data structure defining board information maintained by the boot
-- * ROM on IBM's "Sycamore" evaluation board. An effort has been made to
-- * keep the field names consistent with the 8xx 'bd_t' board info
-- * structures.
-- */
--
--typedef struct board_info {
-- unsigned char bi_s_version[4]; /* Version of this structure */
-- unsigned char bi_r_version[30]; /* Version of the IBM ROM */
-- unsigned int bi_memsize; /* DRAM installed, in bytes */
-- unsigned char bi_enetaddr[6]; /* Local Ethernet MAC address */
-- unsigned char bi_pci_enetaddr[6]; /* PCI Ethernet MAC address */
-- unsigned int bi_intfreq; /* Processor speed, in Hz */
-- unsigned int bi_busfreq; /* PLB Bus speed, in Hz */
-- unsigned int bi_pci_busfreq; /* PCI Bus speed, in Hz */
--} bd_t;
--
--/* Some 4xx parts use a different timebase frequency from the internal clock.
--*/
--#define bi_tbfreq bi_intfreq
--
--
--/* Memory map for the IBM "Sycamore" 405GP evaluation board.
-+/* Memory map for the IBM "Sycamore" 405GPr evaluation board.
- * Generic 4xx plus RTC.
- */
-
--extern void *sycamore_rtc_base;
- #define SYCAMORE_RTC_PADDR ((uint)0xf0000000)
- #define SYCAMORE_RTC_VADDR SYCAMORE_RTC_PADDR
--#define SYCAMORE_RTC_SIZE ((uint)8*1024)
-+#define SYCAMORE_RTC_SIZE ((uint)8*1024)
-
--#ifdef CONFIG_PPC405GP_INTERNAL_CLOCK
--#define BASE_BAUD 201600
--#else
- #define BASE_BAUD 691200
--#endif
-
--#define SYCAMORE_PS2_BASE 0xF0100000
--#define SYCAMORE_FPGA_BASE 0xF0300000
-+#define SYCAMORE_PS2_BASE 0xF0100000
-+
-+/* Flash */
-+#define PPC40x_FPGA_BASE 0xF0300000
-+#define PPC40x_FPGA_REG_OFFS 5 /* offset to flash map reg */
-+#define PPC40x_FLASH_ONBD_N(x) (x & 0x02)
-+#define PPC40x_FLASH_SRAM_SEL(x) (x & 0x01)
-+#define PPC40x_FLASH_LOW 0xFFF00000
-+#define PPC40x_FLASH_HIGH 0xFFF80000
-+#define PPC40x_FLASH_SIZE 0x80000
-
- #define PPC4xx_MACHINE_NAME "IBM Sycamore"
-
--#endif /* !__ASSEMBLY__ */
- #endif /* __ASM_SYCAMORE_H__ */
- #endif /* __KERNEL__ */
-diff --git a/arch/ppc/platforms/4xx/walnut.c b/arch/ppc/platforms/4xx/walnut.c
-index a33eda4..74cb331 100644
---- a/arch/ppc/platforms/4xx/walnut.c
-+++ b/arch/ppc/platforms/4xx/walnut.c
-@@ -90,7 +90,7 @@ walnut_setup_arch(void)
-
- kb_cs = kb_data + 1;
-
-- fpga_status = ioremap(WALNUT_FPGA_BASE, 8);
-+ fpga_status = ioremap(PPC40x_FPGA_BASE, 8);
- if (!fpga_status) {
- printk(KERN_CRIT
- "walnut_setup_arch() fpga_status ioremap failed\n");
-diff --git a/arch/ppc/platforms/4xx/walnut.h b/arch/ppc/platforms/4xx/walnut.h
-index 04cfbf3..dcf2691 100644
---- a/arch/ppc/platforms/4xx/walnut.h
-+++ b/arch/ppc/platforms/4xx/walnut.h
-@@ -1,72 +1,55 @@
- /*
- * arch/ppc/platforms/4xx/walnut.h
- *
-- * Macros, definitions, and data structures specific to the IBM PowerPC
-- * 405GP "Walnut" evaluation board.
-+ * Walnut board definitions
- *
-- * Authors: Grant Erickson <grant@lcse.umn.edu>, Frank Rowand
-- * <frank_rowand@mvista.com>, Debbie Chu <debbie_chu@mvista.com> or
-- * source@mvista.com
-+ * Copyright (c) 2005 DENX Software Engineering
-+ * Stefan Roese <sr@denx.de>
- *
-- * Copyright (c) 1999 Grant Erickson <grant@lcse.umn.edu>
-+ * Based on original work by
-+ * Copyright (c) 1999 Grant Erickson <grant@lcse.umn.edu>
-+ * Frank Rowand <frank_rowand@mvista.com>
-+ * Debbie Chu <debbie_chu@mvista.com>
-+ * 2000 (c) MontaVista, Software, Inc.
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
- *
-- * 2000 (c) MontaVista, Software, Inc. This file is licensed under
-- * the terms of the GNU General Public License version 2. This program
-- * is licensed "as is" without any warranty of any kind, whether express
-- * or implied.
- */
-
- #ifdef __KERNEL__
- #ifndef __ASM_WALNUT_H__
- #define __ASM_WALNUT_H__
-
--/* We have a 405GP core */
-+#include <linux/config.h>
- #include <platforms/4xx/ibm405gp.h>
--
--#ifndef __ASSEMBLY__
--/*
-- * Data structure defining board information maintained by the boot
-- * ROM on IBM's "Walnut" evaluation board. An effort has been made to
-- * keep the field names consistent with the 8xx 'bd_t' board info
-- * structures.
-- */
--
--typedef struct board_info {
-- unsigned char bi_s_version[4]; /* Version of this structure */
-- unsigned char bi_r_version[30]; /* Version of the IBM ROM */
-- unsigned int bi_memsize; /* DRAM installed, in bytes */
-- unsigned char bi_enetaddr[6]; /* Local Ethernet MAC address */
-- unsigned char bi_pci_enetaddr[6]; /* PCI Ethernet MAC address */
-- unsigned int bi_intfreq; /* Processor speed, in Hz */
-- unsigned int bi_busfreq; /* PLB Bus speed, in Hz */
-- unsigned int bi_pci_busfreq; /* PCI Bus speed, in Hz */
--} bd_t;
--
--/* Some 4xx parts use a different timebase frequency from the internal clock.
--*/
--#define bi_tbfreq bi_intfreq
--
-+#include <asm/ppcboot.h>
-
- /* Memory map for the IBM "Walnut" 405GP evaluation board.
- * Generic 4xx plus RTC.
- */
-
--extern void *walnut_rtc_base;
- #define WALNUT_RTC_PADDR ((uint)0xf0000000)
- #define WALNUT_RTC_VADDR WALNUT_RTC_PADDR
- #define WALNUT_RTC_SIZE ((uint)8*1024)
-
--#ifdef CONFIG_PPC405GP_INTERNAL_CLOCK
--#define BASE_BAUD 201600
--#else
- #define BASE_BAUD 691200
--#endif
-
- #define WALNUT_PS2_BASE 0xF0100000
--#define WALNUT_FPGA_BASE 0xF0300000
-+
-+/* Flash */
-+#define PPC40x_FPGA_BASE 0xF0300000
-+#define PPC40x_FPGA_REG_OFFS 5 /* offset to flash map reg */
-+#define PPC40x_FLASH_ONBD_N(x) (x & 0x02)
-+#define PPC40x_FLASH_SRAM_SEL(x) (x & 0x01)
-+#define PPC40x_FLASH_LOW 0xFFF00000
-+#define PPC40x_FLASH_HIGH 0xFFF80000
-+#define PPC40x_FLASH_SIZE 0x80000
-+#define WALNUT_FPGA_BASE PPC40x_FPGA_BASE
-
- #define PPC4xx_MACHINE_NAME "IBM Walnut"
-
--#endif /* !__ASSEMBLY__ */
- #endif /* __ASM_WALNUT_H__ */
- #endif /* __KERNEL__ */
-diff --git a/include/asm-ppc/ibm_ocp.h b/include/asm-ppc/ibm_ocp.h
-index 6f10a25..9c21de1 100644
---- a/include/asm-ppc/ibm_ocp.h
-+++ b/include/asm-ppc/ibm_ocp.h
-@@ -131,9 +131,22 @@ static inline void ibm_ocp_set_emac(int
- /* Copy MAC addresses to EMAC additions */
- for (i=start; i<=end; i++) {
- def = ocp_get_one_device(OCP_VENDOR_IBM, OCP_FUNC_EMAC, i);
-- memcpy(((struct ocp_func_emac_data *)def->additions)->mac_addr,
-- &__res.bi_enetaddr[i],
-- 6);
-+ if (i == 0)
-+ memcpy(((struct ocp_func_emac_data *)def->additions)->mac_addr,
-+ __res.bi_enetaddr, 6);
-+#if defined(CONFIG_405EP) || defined(CONFIG_44x)
-+ else if (i == 1)
-+ memcpy(((struct ocp_func_emac_data *)def->additions)->mac_addr,
-+ __res.bi_enet1addr, 6);
-+#endif
-+#if defined(CONFIG_440GX)
-+ else if (i == 2)
-+ memcpy(((struct ocp_func_emac_data *)def->additions)->mac_addr,
-+ __res.bi_enet2addr, 6);
-+ else if (i == 3)
-+ memcpy(((struct ocp_func_emac_data *)def->additions)->mac_addr,
-+ __res.bi_enet3addr, 6);
-+#endif
- }
- }
- #endif
-diff --git a/include/asm-ppc/ppcboot.h b/include/asm-ppc/ppcboot.h
-index fe24e45..6b7b63f 100644
---- a/include/asm-ppc/ppcboot.h
-+++ b/include/asm-ppc/ppcboot.h
-@@ -73,8 +73,8 @@ typedef struct bd_info {
- #if defined(CONFIG_HYMOD)
- hymod_conf_t bi_hymod_conf; /* hymod configuration information */
- #endif
--#if defined(CONFIG_EVB64260) || defined(CONFIG_44x) || defined(CONFIG_85xx) ||\
-- defined(CONFIG_83xx)
-+#if defined(CONFIG_EVB64260) || defined(CONFIG_405EP) || defined(CONFIG_44x) || \
-+ defined(CONFIG_85xx) || defined(CONFIG_83xx)
- /* second onboard ethernet port */
- unsigned char bi_enet1addr[6];
- #endif
-@@ -96,5 +96,7 @@ typedef struct bd_info {
- #endif
- } bd_t;
-
-+#define bi_tbfreq bi_intfreq
-+
- #endif /* __ASSEMBLY__ */
- #endif /* __ASM_PPCBOOT_H__ */
diff --git a/packages/linux/linux-dht-walnut_2.6.12.6.bb b/packages/linux/linux-dht-walnut_2.6.12.6.bb deleted file mode 100644 index 7c0f434477..0000000000 --- a/packages/linux/linux-dht-walnut_2.6.12.6.bb +++ /dev/null @@ -1,74 +0,0 @@ -SECTION = "kernel" -DESCRIPTION = "Linux kernel for DHT-Walnut (ppc) machine" -LICENSE = "GPL" -PR = "r2" -DEPENDS = "u-boot" - -KERNEL_CCSUFFIX = "-3.4.4" - -SRC_URI = "${KERNELORG_MIRROR}/pub/linux/kernel/v2.6/linux-${PV}.tar.bz2 \ - file://ppc_40x_uboot.patch;patch=1 \ - file://iw_we18-5.diff;patch=1 \ - file://linux-2.6.12-mppe-mppc-1.3.patch;patch=1 \ - file://dht-walnut_defconfig" - - -S = "${WORKDIR}/linux-${PV}" - -inherit kernel - - -FILES_kernel-image = "/boot/zImage.elf" - -export OS = "Linux" -ARCH = "ppc" -KERNEL_IMAGETYPE = "zImage" -KERNEL_OUTPUT = "arch/ppc/boot/images/zImage.elf" - - - - -do_configure_prepend() { - install -m 0644 ${WORKDIR}/dht-walnut_defconfig ${S}/.config -} - -do_stage_append () { -#need ppc platforms includes + friends in order for external kernel modules to compile - - install -d ${STAGING_KERNEL_DIR}/arch/ppc/platforms - install -m 0755 arch/ppc/platforms/*.h ${STAGING_KERNEL_DIR}/arch/ppc/platforms - - install -d ${STAGING_KERNEL_DIR}/arch/ppc/platforms/4xx - install -m 0755 arch/ppc/platforms/4xx/*.h ${STAGING_KERNEL_DIR}/arch/ppc/platforms/4xx - - install -d ${STAGING_KERNEL_DIR}/arch/ppc/platforms/83xx - install -m 0755 arch/ppc/platforms/83xx/*.h ${STAGING_KERNEL_DIR}/arch/ppc/platforms/83xx - - install -d ${STAGING_KERNEL_DIR}/arch/ppc/platforms/85xx - install -m 0755 arch/ppc/platforms/85xx/*.h ${STAGING_KERNEL_DIR}/arch/ppc/platforms/85xx - - install -d ${STAGING_KERNEL_DIR}/include/asm-m68k - install -m 0755 include/asm-m68k/*.h ${STAGING_KERNEL_DIR}/include/asm-m68k -} - -do_install_append () { - install -d ${DEPLOY_DIR}/images - install -m 0755 arch/ppc/boot/images/zImage.elf ${DEPLOY_DIR}/images/${KERNEL_IMAGETYPE}-${PV}-${MACHINE}-${DATETIME}.elf - install -m 0755 vmlinux ${DEPLOY_DIR}/images/ - powerpc-${TARGET_OS}-objcopy -O binary -R .note -R .comment -S ${DEPLOY_DIR}/images/vmlinux ${DEPLOY_DIR}/images/linux.bin - gzip -f -9 ${DEPLOY_DIR}/images/linux.bin - mkimage -A ppc -O linux -T kernel -C gzip -a 0 -e 0 -n "owmnr"+${PV}+"-ppc" -d ${DEPLOY_DIR}/images/linux.bin.gz ${DEPLOY_DIR}/images/uImage-${PV}-${MACHINE}-${DATETIME}.bin - rm ${DEPLOY_DIR}/images/vmlinux - rm ${DEPLOY_DIR}/images/linux.bin.gz - - -} - -pkg_postinst_kernel () { - true -} - -pkg_postrm_kernel () { - true -} - diff --git a/packages/linux/linux-dht-walnut_2.6.12.bb b/packages/linux/linux-dht-walnut_2.6.12.bb deleted file mode 100644 index 7d362ea659..0000000000 --- a/packages/linux/linux-dht-walnut_2.6.12.bb +++ /dev/null @@ -1,92 +0,0 @@ -SECTION = "kernel" -DESCRIPTION = "Linux kernel for DHT-Walnut (ppc) machine" -LICENSE = "GPL" -PR = "r0" -DEPENDS = "u-boot" - -KERNEL_CCSUFFIX = "-3.4.4" - -SRC_URI = "${KERNELORG_MIRROR}/pub/linux/kernel/v2.6/linux-${PV}.tar.bz2 \ - file://ppc_40x_uboot.patch;patch=1 \ - file://iw_we18-5.diff;patch=1 \ - file://linux-2.6.12-mppe-mppc-1.3.patch;patch=1 \ - file://dht-walnut_defconfig" - - -S = "${WORKDIR}/linux-${PV}" - -inherit kernel - - -FILES_kernel-image = "/boot/zImage.elf" - -export OS = "Linux" -ARCH = "ppc" -KERNEL_IMAGETYPE = "zImage" -KERNEL_OUTPUT = "arch/ppc/boot/images/zImage.elf" - - - - -do_configure_prepend() { - install -m 0644 ${WORKDIR}/dht-walnut_defconfig ${S}/.config -# oe_machinstall -m 0644 ${S}/arch/ppc/configs/dht-walnut_defconfig ${S}/.config || die "no default configuration for ${MACHINE} available." -# oe_runmake oldconfig -} - -do_stage_append () { -#need ppc platforms includes + friends in order for external kernel modules to compile - - install -d ${STAGING_KERNEL_DIR}/arch/ppc/platforms - install -m 0755 arch/ppc/platforms/*.h ${STAGING_KERNEL_DIR}/arch/ppc/platforms - - install -d ${STAGING_KERNEL_DIR}/arch/ppc/platforms/4xx - install -m 0755 arch/ppc/platforms/4xx/*.h ${STAGING_KERNEL_DIR}/arch/ppc/platforms/4xx - - install -d ${STAGING_KERNEL_DIR}/arch/ppc/platforms/83xx - install -m 0755 arch/ppc/platforms/83xx/*.h ${STAGING_KERNEL_DIR}/arch/ppc/platforms/83xx - - install -d ${STAGING_KERNEL_DIR}/arch/ppc/platforms/85xx - install -m 0755 arch/ppc/platforms/85xx/*.h ${STAGING_KERNEL_DIR}/arch/ppc/platforms/85xx - - install -d ${STAGING_KERNEL_DIR}/include/asm-m68k - install -m 0755 include/asm-m68k/*.h ${STAGING_KERNEL_DIR}/include/asm-m68k -} - -do_install_append () { - install -d ${DEPLOY_DIR}/images - install -m 0755 arch/ppc/boot/images/zImage.elf ${DEPLOY_DIR}/images/${KERNEL_IMAGETYPE}-${PV}-${MACHINE}-${DATETIME}.elf - install -m 0755 vmlinux ${DEPLOY_DIR}/images/ - powerpc-linux-uclibc-objcopy -O binary -R .note -R .comment -S ${DEPLOY_DIR}/images/vmlinux ${DEPLOY_DIR}/images/linux.bin - gzip -f -9 ${DEPLOY_DIR}/images/linux.bin - mkimage -A ppc -O linux -T kernel -C gzip -a 0 -e 0 -n "owmnr-2.6.12-ppc" -d ${DEPLOY_DIR}/images/linux.bin.gz ${DEPLOY_DIR}/images/uImage-${PV}-${MACHINE}-${DATETIME}.bin - rm ${DEPLOY_DIR}/images/vmlinux - rm ${DEPLOY_DIR}/images/linux.bin.gz - - -} - -pkg_postinst_kernel () { - true -} - -pkg_postrm_kernel () { - true -} - - - - -#do_configure_prepend() { -# install -m 0644 ${WORKDIR}/dht-walnut_defconfig ${S}/.config -#} - - -#do_deploy() { -# install -d ${DEPLOY_DIR}/images -# install -m 0644 arch/${ARCH}/boot/images/zImage.elf ${DEPLOY_DIR}/images/${KERNEL_IMAGETYPE}-${PV}-${MACHINE}-${DATETIME}.bin} - -#do_deploy[dirs] = "${S}" - -#addtask deploy before do_build after do_compile - diff --git a/packages/linux/linux-dht-walnut_2.6.20.bb b/packages/linux/linux-dht-walnut_2.6.20.bb index c770c6aa79..bc876ebf34 100644 --- a/packages/linux/linux-dht-walnut_2.6.20.bb +++ b/packages/linux/linux-dht-walnut_2.6.20.bb @@ -1,10 +1,12 @@ +# Copyright (C) 2007, Stelios Koroneos - Digital OPSiS, All Rights Reserved +# Released under the MIT license (see packages/COPYING) SECTION = "kernel" DESCRIPTION = "Linux kernel for DHT-Walnut (ppc) machine" LICENSE = "GPL" -PR = "r2" +PR = "r3" DEPENDS = "u-boot" -KERNEL_CCSUFFIX = "-3.4.4" +COMPATIBLE_MACHINE = "dht-walnut" SRC_URI = "${KERNELORG_MIRROR}/pub/linux/kernel/v2.6/linux-${PV}.tar.bz2 \ file://dht-walnut_defconfig" @@ -46,14 +48,17 @@ do_stage_append () { do_install_append () { - install -d ${DEPLOY_DIR}/images - install -m 0755 arch/ppc/boot/images/zImage.elf ${DEPLOY_DIR}/images/${KERNEL_IMAGETYPE}-${PV}-${MACHINE}-${DATETIME}.elf - install -m 0755 vmlinux ${DEPLOY_DIR}/images/ - powerpc${TARGET_VENDOR}-${TARGET_OS}-objcopy -O binary -R .note -R .comment -S ${DEPLOY_DIR}/images/vmlinux ${DEPLOY_DIR}/images/linux.bin - gzip -f -9 ${DEPLOY_DIR}/images/linux.bin - mkimage -A ppc -O linux -T kernel -C gzip -a 0 -e 0 -n "ppc405"+${PV} -d ${DEPLOY_DIR}/images/linux.bin.gz ${DEPLOY_DIR}/images/uImage-${PV}-${MACHINE}-${DATETIME}.bin - rm ${DEPLOY_DIR}/images/vmlinux - rm ${DEPLOY_DIR}/images/linux.bin.gz + install -d ${DEPLOY_DIR_IMAGE} + install -m 0755 arch/ppc/boot/images/zImage.elf \ + ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${PV}-${MACHINE}-${DATETIME}.elf + install -m 0755 vmlinux ${DEPLOY_DIR_IMAGE}/ + powerpc${TARGET_VENDOR}-${TARGET_OS}-objcopy -O binary -R .note -R .comment -S \ + ${DEPLOY_DIR_IMAGE}/vmlinux ${DEPLOY_DIR_IMAGE}/linux.bin + gzip -f -9 ${DEPLOY_DIR_IMAGE}/linux.bin + mkimage -A ppc -O linux -T kernel -C gzip -a 0 -e 0 -n "ppc405"+${PV} -d ${DEPLOY_DIR_IMAGE}/linux.bin.gz \ + ${DEPLOY_DIR_IMAGE}/uImage-${PV}-${MACHINE}-${DATETIME}.bin + rm ${DEPLOY_DIR_IMAGE}/vmlinux + rm ${DEPLOY_DIR_IMAGE}/linux.bin.gz } diff --git a/packages/linux/linux-dht-walnut-2.6.12.6/.mtn2git_empty b/packages/linux/linux-sequoia-2.6.21/.mtn2git_empty index e69de29bb2..e69de29bb2 100644 --- a/packages/linux/linux-dht-walnut-2.6.12.6/.mtn2git_empty +++ b/packages/linux/linux-sequoia-2.6.21/.mtn2git_empty diff --git a/packages/linux/linux-sequoia_2.6.21.bb b/packages/linux/linux-sequoia_2.6.21.bb new file mode 100644 index 0000000000..1fa520e914 --- /dev/null +++ b/packages/linux/linux-sequoia_2.6.21.bb @@ -0,0 +1,60 @@ +# Copyright (C) 2007, Stelios Koroneos - Digital OPSiS, All Rights Reserved +# Released under the MIT license (see packages/COPYING) +SECTION = "kernel" +DESCRIPTION = "Linux kernel for AMCC's Sequoia dev board" +LICENSE = "GPL" +PR = "r0" +#DEPENDS = "u-boot" + +COMPATIBLE_MACHINE = "sequoia" + +#DENX git kernel +#Same as in AMCC's sequoia dev kit +SRC_URI ="git://www.denx.de/git/linux-2.6-denx.git;protocol=git;tag=78157a82fa20719f7e3307307755888e9af2c0e9 \ + file://sequoia_defconfig " + + +S = "${WORKDIR}/git" + +inherit kernel + +export ARCH="ppc" + +KERNEL_IMAGETYPE = "zImage.elf" + +do_configure() { + install -m 644 ${WORKDIR}/sequoia_defconfig ${S}/.config + make ARCH=${ARCH} oldconfig +} + +do_stage_append () { +#need ppc platforms includes + friends in order for external kernel modules to compile as headers a$ + + install -d ${STAGING_KERNEL_DIR}/arch/ + cp -a arch/ppc ${STAGING_KERNEL_DIR}/arch/ + cp -a arch/powerpc ${STAGING_KERNEL_DIR}/arch/ + + install -d ${STAGING_KERNEL_DIR}/include/asm + cp -a include/asm-powerpc ${STAGING_KERNEL_DIR}/include/ + cp -a include/asm-ppc ${STAGING_KERNEL_DIR}/include/ +} + + + +do_deploy() { + install -d ${DEPLOY_DIR_IMAGE} + install -m 0644 arch/${ARCH}/boot/images/${KERNEL_IMAGETYPE} \ + ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${PV}-${MACHINE}-${DATETIME} +} + +#seems like 2.6.21 kernel images have moved (or is this only for the Denx kernel ?) +#so we need to copy the kernel image where kernel.bbclass expects it to be +do_install_prepend() { + install -m 0644 arch/${ARCH}/boot/images/${KERNEL_IMAGETYPE} \ + arch/${ARCH}/boot/${KERNEL_IMAGETYPE} +} + +do_deploy[dirs] = "${S}" + +addtask deploy before do_build after do_compile + |