summaryrefslogtreecommitdiff
path: root/packages/linux/linux-ezx-2.6.24/patches/ezx-pcap.patch
diff options
context:
space:
mode:
Diffstat (limited to 'packages/linux/linux-ezx-2.6.24/patches/ezx-pcap.patch')
-rw-r--r--packages/linux/linux-ezx-2.6.24/patches/ezx-pcap.patch852
1 files changed, 0 insertions, 852 deletions
diff --git a/packages/linux/linux-ezx-2.6.24/patches/ezx-pcap.patch b/packages/linux/linux-ezx-2.6.24/patches/ezx-pcap.patch
deleted file mode 100644
index f38a5e52da..0000000000
--- a/packages/linux/linux-ezx-2.6.24/patches/ezx-pcap.patch
+++ /dev/null
@@ -1,852 +0,0 @@
-Index: linux-2.6.24/arch/arm/mach-pxa/ezx-pcap.c
-===================================================================
---- /dev/null
-+++ linux-2.6.24/arch/arm/mach-pxa/ezx-pcap.c
-@@ -0,0 +1,513 @@
-+/* Driver for Motorola PCAP2 as present in EZX phones
-+ *
-+ * This is both a SPI device driver for PCAP itself, as well as
-+ * an IRQ demultiplexer for handling PCAP generated events such as
-+ * headphone jack sense by downstream drivers.
-+ *
-+ * Copyright (C) 2006 Harald Welte <laforge@openezx.org>
-+ * Copyright (C) 2007 Daniel Ribeiro <wyrm@openezx.org>
-+ *
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/platform_device.h>
-+#include <linux/interrupt.h>
-+#include <linux/kernel_stat.h>
-+#include <linux/proc_fs.h>
-+
-+#include <asm/hardware.h>
-+#include <asm/mach-types.h>
-+
-+#include <asm/arch/ezx.h>
-+#include <asm/arch/ssp.h>
-+#include <asm/arch/pxa-regs.h>
-+#include <asm/arch/ezx-pcap.h>
-+#include <asm/arch/irqs.h>
-+#include <asm/mach/irq.h>
-+
-+#if 0
-+#define DEBUGP(x, args...) printk(x, ## args)
-+#else
-+#define DEBUGP(x, args...)
-+#endif
-+
-+static DEFINE_SPINLOCK(ezx_ssp_lock);
-+static struct ssp_dev ezx_ssp_dev;
-+static struct ssp_state ezx_ssp_state;
-+static struct pcap_platform_data *pcap_data;
-+static int pcap_irq;
-+
-+static unsigned long ezx_ssp_pcap_putget(ulong data)
-+{
-+ unsigned long flag;
-+ u32 ret = 0;
-+
-+ spin_lock_irqsave(&ezx_ssp_lock, flag);
-+ if (pcap_data->cs >= 0) {
-+ if (pcap_data->flags & PCAP_CS_AH)
-+ GPSR(pcap_data->cs) = GPIO_bit(pcap_data->cs);
-+ else
-+ GPCR(pcap_data->cs) = GPIO_bit(pcap_data->cs);
-+ }
-+
-+ ssp_write_word(&ezx_ssp_dev,data);
-+ ssp_read_word(&ezx_ssp_dev, &ret);
-+
-+ if (pcap_data->cs >= 0) {
-+ if(pcap_data->flags & PCAP_CS_AH)
-+ GPCR(pcap_data->cs) = GPIO_bit(pcap_data->cs);
-+ else
-+ GPSR(pcap_data->cs) = GPIO_bit(pcap_data->cs);
-+ }
-+
-+ spin_unlock_irqrestore(&ezx_ssp_lock, flag);
-+
-+ return ret;
-+}
-+
-+int ezx_pcap_write(u_int8_t reg_num, u_int32_t value)
-+{
-+ value &= PCAP_REGISTER_VALUE_MASK;
-+ value |= PCAP_REGISTER_WRITE_OP_BIT
-+ | (reg_num<<PCAP_REGISTER_ADDRESS_SHIFT);
-+
-+ ezx_ssp_pcap_putget(value);
-+
-+ DEBUGP("pcap write r%x: 0x%08x\n", reg_num, value);
-+ return 0;
-+}
-+EXPORT_SYMBOL_GPL(ezx_pcap_write);
-+
-+int ezx_pcap_read(u_int8_t reg_num, u_int32_t *value)
-+{
-+ u_int32_t frame = PCAP_REGISTER_READ_OP_BIT
-+ | (reg_num<<PCAP_REGISTER_ADDRESS_SHIFT);
-+
-+ *value = ezx_ssp_pcap_putget(frame);
-+
-+ DEBUGP("pcap read r%x: 0x%08x\n", reg_num, *value);
-+ return 0;
-+}
-+EXPORT_SYMBOL_GPL(ezx_pcap_read);
-+
-+int ezx_pcap_bit_set(u_int32_t sspPcapBit, u_int8_t to)
-+{
-+ int ret;
-+ u_int32_t tmp;
-+ u_int32_t bit = (sspPcapBit & PCAP_REGISTER_VALUE_MASK);
-+ u_int8_t reg_num = (sspPcapBit & PCAP_REGISTER_ADDRESS_MASK)
-+ >> PCAP_REGISTER_ADDRESS_SHIFT;
-+
-+ ret = ezx_pcap_read(reg_num, &tmp);
-+ if (ret < 0)
-+ return ret;
-+
-+ if (to == 0)
-+ tmp &= ~bit;
-+ else
-+ tmp |= bit;
-+
-+ return ezx_pcap_write(reg_num, tmp);
-+}
-+EXPORT_SYMBOL_GPL(ezx_pcap_bit_set);
-+
-+int ezx_pcap_read_bit(u_int32_t bit)
-+{
-+ int ret;
-+ u_int32_t tmp;
-+ u_int8_t reg_num = (bit & PCAP_REGISTER_ADDRESS_MASK)
-+ >> PCAP_REGISTER_ADDRESS_SHIFT;
-+
-+ ret = ezx_pcap_read(reg_num, &tmp);
-+ if (ret < 0)
-+ return ret;
-+
-+ return tmp & (bit & PCAP_REGISTER_VALUE_MASK);
-+}
-+EXPORT_SYMBOL_GPL(ezx_pcap_read_bit);
-+
-+/* /proc/pcap support */
-+#ifdef CONFIG_PROC_FS
-+
-+static struct proc_dir_entry *proc_pcap;
-+
-+char *pcap_registers[] = {
-+ "ISR\t", "MSR\t", "PSTAT\t", "INT_SEL\t", "SWCTRL\t", "VREG1\t",
-+ "VREG2\t", "VREG\t", "BATT_DAC", "ADC1\t", "ADC2\t", "AUD_CODEC",
-+ "RX_AUD_AMPS", "ST_DAC\t", "RTC_TOD\t", "RTC_TODA", "RTC_DAY\t",
-+ "RTC_DAYA", "MTRTMR\t", "PWRCTRL\t", "BUSCTRL\t", "PERIPH\t",
-+ "AUXVREG_MASK", "VENDOR_REV", "LOWPWR_CTRL", "PERIPH_MASK",
-+ "TX_AUD_AMPS", "GP\t",
-+ NULL, NULL, NULL, NULL
-+};
-+
-+static int pcap_read_proc(char *page, char **start, off_t off, int count,
-+ int *eof, void *data_unused)
-+{
-+ int len = 0;
-+ u_int8_t r;
-+ u_int32_t v;
-+ off_t begin = 0;
-+
-+ for(r = 0; r < 32; r++) {
-+ if (pcap_registers[r] == NULL)
-+ continue;
-+ ezx_pcap_read(r, &v);
-+ len += sprintf(page+len, "%s\t%08X\n", pcap_registers[r], v);
-+ if(len + begin > off + count)
-+ goto done;
-+ if(len + begin < off) {
-+ begin += len;
-+ len = 0;
-+ }
-+ }
-+ *eof = 1;
-+done:
-+ if (off >= len+begin)
-+ return 0;
-+ *start = page + (off-begin);
-+ return ((count < begin+len-off) ? count : begin+len-off);
-+}
-+#endif
-+
-+void ezx_pcap_vibrator_level(u_int32_t value)
-+{
-+ u_int32_t tmp;
-+
-+ ezx_pcap_read(PCAP_REG_AUXVREG, &tmp);
-+
-+ tmp &= ~PCAP_AUXVREG_V_VIB_MASK;
-+ tmp |= ((value << PCAP_AUXVREG_V_VIB_SHIFT) & PCAP_AUXVREG_V_VIB_MASK);
-+
-+ ezx_pcap_write(PCAP_REG_AUXVREG, tmp);
-+}
-+EXPORT_SYMBOL_GPL(ezx_pcap_vibrator_level);
-+
-+/* MMC/SD specific functions */
-+
-+void ezx_pcap_mmcsd_voltage(u_int32_t bits)
-+{
-+ unsigned int tmp;
-+ ezx_pcap_read(PCAP_REG_AUXVREG, &tmp);
-+ if (pcap_data->flags & PCAP_MCI_SD) {
-+ tmp &= ~PCAP_AUXVREG_VAUX2_MASK;
-+ tmp |= ((bits << PCAP_AUXVREG_VAUX2_SHIFT) &
-+ PCAP_AUXVREG_VAUX2_MASK);
-+ }
-+ else if (pcap_data->flags & PCAP_MCI_TF) {
-+ tmp &= ~PCAP_AUXVREG_VAUX3_MASK;
-+ tmp |= ((bits << PCAP_AUXVREG_VAUX3_SHIFT) &
-+ PCAP_AUXVREG_VAUX3_MASK);
-+ }
-+ ezx_pcap_write(PCAP_REG_AUXVREG, tmp);
-+}
-+EXPORT_SYMBOL_GPL(ezx_pcap_mmcsd_voltage);
-+
-+int ezx_pcap_mmcsd_power(int on)
-+{
-+ if (on > 0) on = 1;
-+ else on = 0;
-+
-+ if (pcap_data->flags & PCAP_MCI_SD)
-+ return ezx_pcap_bit_set(PCAP_BIT_AUXVREG_VAUX2_EN, on);
-+ else if (pcap_data->flags & PCAP_MCI_TF)
-+ return ezx_pcap_bit_set(PCAP_BIT_AUXVREG_VAUX3_EN, on);
-+ else
-+ return -ENODEV;
-+}
-+EXPORT_SYMBOL_GPL(ezx_pcap_mmcsd_power);
-+
-+/* IRQ Handling */
-+
-+/* Array indexed by BIT POSITION of PCAP register, returns IRQ number */
-+static unsigned int pcap2irq[] = {
-+ [0] = EZX_IRQ_ADCDONE,
-+ [1] = EZX_IRQ_TS,
-+ [2] = EZX_IRQ_1HZ, /* 1HZ */
-+ [3] = EZX_IRQ_WH, /* WH */
-+ [4] = EZX_IRQ_WL, /* WL */
-+ [5] = EZX_IRQ_TODA, /* TODA */
-+ [6] = EZX_IRQ_USB4V,
-+ [7] = EZX_IRQ_ONOFF, /* ONOFF */
-+ [8] = EZX_IRQ_ONOFF2, /* ONOFF2 */
-+ [9] = EZX_IRQ_USB1V,
-+ [10] = EZX_IRQ_MOBPORT, /* MOBPORT */
-+ [11] = EZX_IRQ_MIC,
-+ [12] = EZX_IRQ_HEADJACK,
-+ [13] = EZX_IRQ_ST, /* ST */
-+ [14] = EZX_IRQ_PC, /* PC */
-+ [15] = EZX_IRQ_WARM, /* WARM */
-+ [16] = EZX_IRQ_EOL, /* EOL */
-+ [17] = EZX_IRQ_CLK, /* CLK */
-+ [18] = EZX_IRQ_SYSRST, /* SYSRST */
-+ [19] = 0,
-+ [20] = EZX_IRQ_ADCDONE2,
-+ [21] = EZX_IRQ_SOFTRESET, /* SOFTRESET */
-+ [22] = EZX_IRQ_MNEXB, /* MNEXB */
-+};
-+
-+/* Array indexed by IRQ NUMBER, returns PCAP absolute value */
-+static unsigned int irq2pcap[] = {
-+ [EZX_IRQ_MNEXB] = PCAP_IRQ_MNEXB,
-+ [EZX_IRQ_SOFTRESET] = PCAP_IRQ_SOFTRESET,
-+ [EZX_IRQ_SYSRST] = PCAP_IRQ_SYSRST,
-+ [EZX_IRQ_CLK] = PCAP_IRQ_CLK,
-+ [EZX_IRQ_EOL] = PCAP_IRQ_EOL,
-+ [EZX_IRQ_WARM] = PCAP_IRQ_WARM,
-+ [EZX_IRQ_PC] = PCAP_IRQ_PC,
-+ [EZX_IRQ_ST] = PCAP_IRQ_ST,
-+ [EZX_IRQ_MOBPORT] = PCAP_IRQ_MOBPORT,
-+ [EZX_IRQ_ONOFF2] = PCAP_IRQ_ONOFF2,
-+ [EZX_IRQ_ONOFF] = PCAP_IRQ_ONOFF,
-+ [EZX_IRQ_TODA] = PCAP_IRQ_TODA,
-+ [EZX_IRQ_WL] = PCAP_IRQ_WL,
-+ [EZX_IRQ_WH] = PCAP_IRQ_WH,
-+ [EZX_IRQ_1HZ] = PCAP_IRQ_1HZ,
-+ [EZX_IRQ_USB4V] = PCAP_IRQ_USB4V,
-+ [EZX_IRQ_USB1V] = PCAP_IRQ_USB1V,
-+ [EZX_IRQ_HEADJACK] = PCAP_IRQ_A1,
-+ [EZX_IRQ_MIC] = PCAP_IRQ_MB2,
-+ [EZX_IRQ_TS] = PCAP_IRQ_TS,
-+ [EZX_IRQ_ADCDONE] = PCAP_IRQ_ADCDONE,
-+ [EZX_IRQ_ADCDONE2] = PCAP_IRQ_ADCDONE2,
-+};
-+
-+static void pcap_ack_irq(unsigned int irq)
-+{
-+ DEBUGP("pcap_ack_irq: %u\n", irq);
-+ ezx_pcap_write(PCAP_REG_ISR, irq2pcap[irq]);
-+}
-+
-+static void pcap_mask_irq(unsigned int irq)
-+{
-+ u_int32_t reg;
-+ unsigned long flag;
-+
-+ spin_lock_irqsave(&ezx_ssp_lock, flag);
-+ DEBUGP("pcap_mask_irq: %u\n", irq);
-+ ezx_pcap_read(PCAP_REG_MSR, &reg);
-+ reg |= irq2pcap[irq];
-+ ezx_pcap_write(PCAP_REG_MSR, reg);
-+ spin_unlock_irqrestore(&ezx_ssp_lock, flag);
-+}
-+
-+static void pcap_unmask_irq(unsigned int irq)
-+{
-+ u_int32_t tmp;
-+ unsigned long flag;
-+
-+ spin_lock_irqsave(&ezx_ssp_lock, flag);
-+ DEBUGP("pcap_unmask_irq: %u\n", irq);
-+ ezx_pcap_read(PCAP_REG_MSR, &tmp);
-+ tmp &= ~irq2pcap[irq];
-+ ezx_pcap_write(PCAP_REG_MSR, tmp);
-+ spin_unlock_irqrestore(&ezx_ssp_lock, flag);
-+}
-+
-+static struct irq_chip pcap_chip = {
-+ .ack = pcap_ack_irq,
-+ .mask = pcap_mask_irq,
-+ .unmask = pcap_unmask_irq,
-+};
-+
-+/* handler for interrupt received from PCAP via GPIO */
-+static void pcap_irq_demux_handler(unsigned int irq, struct irq_desc *desc)
-+{
-+ const unsigned int cpu = smp_processor_id();
-+ int i;
-+ u_int32_t isr, msr;
-+
-+ spin_lock(&desc->lock);
-+ desc->status &= ~(IRQ_REPLAY | IRQ_WAITING);
-+ if (unlikely(desc->status & (IRQ_INPROGRESS | IRQ_DISABLED))) {
-+ desc->status |= (IRQ_PENDING | IRQ_MASKED);
-+ desc->chip->mask(irq);
-+ desc->chip->ack(irq);
-+ goto out_unlock;
-+ }
-+ kstat_cpu(cpu).irqs[irq]++;
-+ desc->chip->ack(irq);
-+ desc->status |= IRQ_INPROGRESS;
-+ do {
-+ if (unlikely((desc->status &
-+ (IRQ_PENDING | IRQ_MASKED | IRQ_DISABLED)) ==
-+ (IRQ_PENDING | IRQ_MASKED))) {
-+ desc->chip->unmask(irq);
-+ desc->status &= ~IRQ_MASKED;
-+ }
-+ desc->status &= ~IRQ_PENDING;
-+
-+ ezx_pcap_read(PCAP_REG_ISR, &isr);
-+ ezx_pcap_read(PCAP_REG_MSR, &msr);
-+ for (i = ARRAY_SIZE(pcap2irq)-1; i >= 0; i--) {
-+ unsigned int pirq = pcap2irq[i];
-+ struct irq_desc *subdesc;
-+ if (pirq == 0 || !(isr & irq2pcap[pirq]))
-+ continue;
-+ subdesc = irq_desc + pirq;
-+ if (msr & irq2pcap[pirq])
-+ continue;
-+ DEBUGP("found irq %u\n", pirq);
-+ spin_unlock(&desc->lock);
-+ desc_handle_irq(pirq, subdesc);
-+ spin_lock(&desc->lock);
-+ }
-+
-+ } while ((desc->status & (IRQ_PENDING | IRQ_DISABLED)) == IRQ_PENDING);
-+
-+ desc->status &= ~IRQ_INPROGRESS;
-+out_unlock:
-+ spin_unlock(&desc->lock);
-+}
-+
-+static int ezx_pcap_remove(struct platform_device *pdev)
-+{
-+ int irq;
-+ DEBUGP("exz_pcap_remove entered\n");
-+
-+ set_irq_chained_handler(pcap_irq, NULL);
-+
-+ for (irq = EZX_IRQ(0); irq <= EZX_IRQ(21); irq++) {
-+ set_irq_chip(irq, NULL);
-+ set_irq_handler(irq, NULL);
-+ set_irq_flags(irq, 0);
-+ }
-+
-+ ssp_exit(&ezx_ssp_dev);
-+
-+ return 0;
-+}
-+
-+static int __init ezx_pcap_probe(struct platform_device *pdev)
-+{
-+ unsigned int ret, irq;
-+ DEBUGP("ezx_pcap_probe entered\n");
-+
-+ pcap_data = pdev->dev.platform_data;
-+
-+ /* configure ssp port */
-+ pxa_gpio_mode(29|GPIO_ALT_FN_3_OUT);
-+ pxa_gpio_mode(GPIO24_SFRM_MD);
-+ pxa_gpio_mode(GPIO25_STXD_MD);
-+ pxa_gpio_mode(GPIO26_SRXD_MD);
-+
-+ if (pcap_data->cs >= 0) {
-+ if (pcap_data->flags & PCAP_CS_AH)
-+ pxa_gpio_mode(pcap_data->cs | GPIO_OUT);
-+ else
-+ pxa_gpio_mode(pcap_data->cs | GPIO_OUT
-+ | GPIO_DFLT_HIGH);
-+ }
-+ pcap_irq = platform_get_irq(pdev, 0);
-+ if(pcap_irq < 0) {
-+ printk(KERN_ERR "Unable to get IRQ for pcap!\n");
-+ return pcap_irq;
-+ }
-+
-+ ret = ssp_init(&ezx_ssp_dev, pcap_data->port, 0);
-+ if (ret) {
-+ printk(KERN_ERR "Unable to register SSP handler!\n");
-+ return ret;
-+ }
-+
-+ ssp_disable(&ezx_ssp_dev);
-+ ssp_config(&ezx_ssp_dev,
-+ (SSCR0_Motorola | SSCR0_DataSize(16) | SSCR0_EDSS),
-+ (SSCR1_TxTresh(1) | SSCR1_RxTresh(1)),
-+ 0, SSCR0_SerClkDiv(pcap_data->clk));
-+ ssp_enable(&ezx_ssp_dev);
-+
-+ /* mask/ack all PCAP interrupts */
-+ ezx_pcap_write(PCAP_REG_MSR, PCAP_MASK_ALL_INTERRUPT);
-+ ezx_pcap_write(PCAP_REG_ISR, PCAP_CLEAR_INTERRUPT_REGISTER);
-+
-+ if (pcap_data->init)
-+ pcap_data->init();
-+
-+ /* set up interrupt demultiplexing code for PCAP2 irqs */
-+ set_irq_type(pcap_irq, IRQT_RISING);
-+ for (irq = EZX_IRQ(0); irq <= EZX_IRQ(21); irq++) {
-+ set_irq_chip(irq, &pcap_chip);
-+ set_irq_handler(irq, handle_level_irq);
-+ set_irq_flags(irq, IRQF_VALID);
-+ }
-+ set_irq_chained_handler(pcap_irq, pcap_irq_demux_handler);
-+ set_irq_wake(pcap_irq, 1);
-+
-+ printk("ezx-pcap: ssp driver registered\n");
-+ return ret;
-+}
-+
-+static int ezx_pcap_suspend(struct platform_device *dev, pm_message_t state)
-+{
-+ DEBUGP("pcap suspend!\n");
-+ ssp_flush(&ezx_ssp_dev);
-+ ssp_save_state(&ezx_ssp_dev, &ezx_ssp_state);
-+ if (pcap_data->cs >= 0)
-+ pxa_gpio_mode(pcap_data->cs | GPIO_IN);
-+ return 0;
-+}
-+
-+static int ezx_pcap_resume(struct platform_device *dev)
-+{
-+ DEBUGP("pcap resume!\n");
-+
-+ if (pcap_data->cs >= 0) {
-+ if (pcap_data->flags & PCAP_CS_AH) {
-+ pxa_gpio_mode(pcap_data->cs | GPIO_OUT);
-+ GPCR(pcap_data->cs) = GPIO_bit(pcap_data->cs);
-+ }
-+ else {
-+ pxa_gpio_mode(pcap_data->cs | GPIO_OUT | GPIO_DFLT_HIGH);
-+ GPSR(pcap_data->cs) = GPIO_bit(pcap_data->cs);
-+ }
-+ }
-+ ssp_restore_state(&ezx_ssp_dev,&ezx_ssp_state);
-+ ssp_enable(&ezx_ssp_dev);
-+
-+ ezx_pcap_write(PCAP_REG_ISR, PCAP_CLEAR_INTERRUPT_REGISTER);
-+
-+ return 0;
-+}
-+
-+static struct platform_driver ezxpcap_driver = {
-+ .probe = ezx_pcap_probe,
-+ .remove = ezx_pcap_remove,
-+ .suspend = ezx_pcap_suspend,
-+ .resume = ezx_pcap_resume,
-+ .driver = {
-+ .name = "ezx-pcap",
-+ .owner = THIS_MODULE,
-+ },
-+};
-+
-+static int __init ezx_pcap_init(void)
-+{
-+ DEBUGP("ezx_pcap_init entered\n");
-+
-+#ifdef CONFIG_PROC_FS
-+ if((proc_pcap = create_proc_entry("pcap", 0, NULL)))
-+ proc_pcap->read_proc = pcap_read_proc;
-+#endif
-+
-+ return platform_driver_register(&ezxpcap_driver);
-+}
-+
-+static void __exit ezx_pcap_exit(void)
-+{
-+#ifdef CONFIG_PROC_FS
-+ if (proc_pcap)
-+ remove_proc_entry("pcap", NULL);
-+#endif
-+
-+ return platform_driver_unregister(&ezxpcap_driver);
-+}
-+
-+module_init(ezx_pcap_init);
-+module_exit(ezx_pcap_exit);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Harald Welte");
-+MODULE_DESCRIPTION("SPI Driver for Motorola PCAP2");
-+
-Index: linux-2.6.24/include/asm-arm/arch-pxa/ezx-pcap.h
-===================================================================
---- /dev/null
-+++ linux-2.6.24/include/asm-arm/arch-pxa/ezx-pcap.h
-@@ -0,0 +1,248 @@
-+/*
-+ * Copyright 2007 Daniel Ribeiro <wyrm@openezx.org>
-+ */
-+
-+#ifndef EZX_PCAP_H
-+#define EZX_PCAP_H
-+
-+struct pcap_platform_data {
-+ int port; /* SSP port */
-+ int cs; /* CS gpio */
-+ int clk;
-+ int flags; /* driver flags */
-+ int (*init)(void); /* board specific driver init */
-+};
-+
-+/* driver configuration */
-+#define PCAP_CS_AH (1 << 0) /* CS pin is active high */
-+#define PCAP_MCI_SD (1 << 1) /* SD card slot */
-+#define PCAP_MCI_TF (1 << 2) /* TF card slot */
-+
-+#define PCAP_REGISTER_WRITE_OP_BIT 0x80000000
-+#define PCAP_REGISTER_READ_OP_BIT 0x00000000
-+
-+#define PCAP_REGISTER_VALUE_MASK 0x01ffffff
-+#define PCAP_REGISTER_ADDRESS_MASK 0x7c000000
-+#define PCAP_REGISTER_ADDRESS_SHIFT 26
-+#define PCAP_REGISTER_NUMBER 32
-+#define PCAP_CLEAR_INTERRUPT_REGISTER 0x01ffffff
-+#define PCAP_MASK_ALL_INTERRUPT 0x01ffffff
-+
-+
-+#define pbit(reg, bit) ((reg << PCAP_REGISTER_ADDRESS_SHIFT) | bit)
-+
-+/* registers acessible by both pcap ports */
-+#define PCAP_REG_ISR 0x0 /* Interrupt Status */
-+#define PCAP_REG_MSR 0x1 /* Interrupt Mask */
-+#define PCAP_REG_PSTAT 0x2 /* Processor Status */
-+#define PCAP_REG_VREG2 0x6 /* Regulator Bank 2 Control */
-+#define PCAP_REG_AUXVREG 0x7 /* Auxiliary Regulator Control */
-+#define PCAP_REG_BATT 0x8 /* Battery Control */
-+#define PCAP_REG_ADC1 0x9 /* AD Control */
-+#define PCAP_REG_ADC2 0xa /* AD Result */
-+#define PCAP_REG_CODEC 0xb /* Audio Codec Control */
-+#define PCAP_REG_RX_AMPS 0xc /* RX Audio Amplifiers Control */
-+#define PCAP_REG_ST_DAC 0xd /* Stereo DAC Control */
-+#define PCAP_REG_BUSCTRL 0x14 /* Connectivity Control */
-+#define PCAP_REG_PERIPH 0x15 /* Peripheral Control */
-+#define PCAP_REG_LOWPWR 0x18 /* Regulator Low Power Control */
-+#define PCAP_REG_TX_AMPS 0x1a /* TX Audio Amplifiers Control */
-+#define PCAP_REG_GP 0x1b /* General Purpose */
-+
-+/* registers acessible by pcap port 1 only (a1200, e2 & e6) */
-+#define PCAP_REG_INT_SEL 0x3 /* Interrupt Select */
-+#define PCAP_REG_SWCTRL 0x4 /* Switching Regulator Control */
-+#define PCAP_REG_VREG1 0x5 /* Regulator Bank 1 Control */
-+#define PCAP_REG_RTC_TOD 0xe /* RTC Time of Day */
-+#define PCAP_REG_RTC_TODA 0xf /* RTC Time of Day Alarm */
-+#define PCAP_REG_RTC_DAY 0x10 /* RTC Day */
-+#define PCAP_REG_RTC_DAYA 0x11 /* RTC Day Alarm */
-+#define PCAP_REG_MTRTMR 0x12 /* AD Monitor Timer */
-+#define PCAP_REG_PWR 0x13 /* Power Control */
-+#define PCAP_REG_AUXVREG_MASK 0x16 /* Auxiliary Regulator Mask */
-+#define PCAP_REG_VENDOR_REV 0x17
-+#define PCAP_REG_PERIPH_MASK 0x19 /* Peripheral Mask */
-+
-+/* interrupts - registers 0, 1, 2, 3 */
-+#define PCAP_IRQ_ADCDONE (1 << 0) /* AD Conversion Done Port 1 */
-+#define PCAP_IRQ_TS (1 << 1) /* Touch Screen */
-+#define PCAP_IRQ_1HZ (1 << 2) /* 1HZ Timer */
-+#define PCAP_IRQ_WH (1 << 3)
-+#define PCAP_IRQ_WL (1 << 4)
-+#define PCAP_IRQ_TODA (1 << 5)
-+#define PCAP_IRQ_USB4V (1 << 6)
-+#define PCAP_IRQ_ONOFF (1 << 7)
-+#define PCAP_IRQ_ONOFF2 (1 << 8)
-+#define PCAP_IRQ_USB1V (1 << 9)
-+#define PCAP_IRQ_MOBPORT (1 << 10)
-+#define PCAP_IRQ_MB2 (1 << 11) /* Mic */
-+#define PCAP_IRQ_A1 (1 << 12) /* Audio jack */
-+#define PCAP_IRQ_ST (1 << 13)
-+#define PCAP_IRQ_PC (1 << 14)
-+#define PCAP_IRQ_WARM (1 << 15)
-+#define PCAP_IRQ_EOL (1 << 16)
-+#define PCAP_IRQ_CLK (1 << 17)
-+#define PCAP_IRQ_SYSRST (1 << 18)
-+#define PCAP_IRQ_ADCDONE2 (1 << 20) /* AD Conversion Done Port 2 */
-+#define PCAP_IRQ_SOFTRESET (1 << 21)
-+#define PCAP_IRQ_MNEXB (1 << 22)
-+
-+#define PCAP_BIT_VREG2_V1_STBY pbit(PCAP_REG_VREG2, (1 << 0))
-+#define PCAP_BIT_VREG2_V2_STBY pbit(PCAP_REG_VREG2, (1 << 1))
-+#define PCAP_BIT_VREG2_V3_STBY pbit(PCAP_REG_VREG2, (1 << 2))
-+#define PCAP_BIT_VREG2_V4_STBY pbit(PCAP_REG_VREG2, (1 << 3))
-+#define PCAP_BIT_VREG2_V5_STBY pbit(PCAP_REG_VREG2, (1 << 4))
-+#define PCAP_BIT_VREG2_V6_STBY pbit(PCAP_REG_VREG2, (1 << 5))
-+#define PCAP_BIT_VREG2_V7_STBY pbit(PCAP_REG_VREG2, (1 << 6))
-+#define PCAP_BIT_VREG2_V8_STBY pbit(PCAP_REG_VREG2, (1 << 7))
-+#define PCAP_BIT_VREG2_V9_STBY pbit(PCAP_REG_VREG2, (1 << 8))
-+#define PCAP_BIT_VREG2_V10_STBY pbit(PCAP_REG_VREG2, (1 << 9))
-+#define PCAP_BIT_VREG2_V1_LOWPWR pbit(PCAP_REG_VREG2, (1 << 10))
-+#define PCAP_BIT_VREG2_V2_LOWPWR pbit(PCAP_REG_VREG2, (1 << 11))
-+#define PCAP_BIT_VREG2_V3_LOWPWR pbit(PCAP_REG_VREG2, (1 << 12))
-+#define PCAP_BIT_VREG2_V4_LOWPWR pbit(PCAP_REG_VREG2, (1 << 13))
-+#define PCAP_BIT_VREG2_V5_LOWPWR pbit(PCAP_REG_VREG2, (1 << 14))
-+#define PCAP_BIT_VREG2_V6_LOWPWR pbit(PCAP_REG_VREG2, (1 << 15))
-+#define PCAP_BIT_VREG2_V7_LOWPWR pbit(PCAP_REG_VREG2, (1 << 16))
-+#define PCAP_BIT_VREG2_V8_LOWPWR pbit(PCAP_REG_VREG2, (1 << 17))
-+#define PCAP_BIT_VREG2_V9_LOWPWR pbit(PCAP_REG_VREG2, (1 << 18))
-+#define PCAP_BIT_VREG2_V10_LOWPWR pbit(PCAP_REG_VREG2, (1 << 19))
-+
-+#define PCAP_BIT_AUXVREG_VAUX1_EN pbit(PCAP_REG_AUXVREG, (1 << 1))
-+#define PCAP_AUXVREG_VAUX1_MASK 0x0000000c
-+#define PCAP_AUXVREG_VAUX1_SHIFT 2
-+#define PCAP_BIT_AUXVREG_VAUX2_EN pbit(PCAP_REG_AUXVREG, (1 << 4))
-+#define PCAP_AUXVREG_VAUX2_MASK 0x00000060
-+#define PCAP_AUXVREG_VAUX2_SHIFT 5
-+#define PCAP_BIT_AUXVREG_VAUX3_EN pbit(PCAP_REG_AUXVREG, (1 << 7))
-+#define PCAP_AUXVREG_VAUX3_MASK 0x00000f00
-+#define PCAP_AUXVREG_VAUX3_SHIFT 8
-+#define PCAP_BIT_AUXVREG_VAUX4_EN pbit(PCAP_REG_AUXVREG, (1 << 12))
-+#define PCAP_AUXVREG_VAUX4_MASK 0x00006000
-+#define PCAP_AUXVREG_VAUX4_SHIFT 13
-+#define PCAP_BIT_AUXVREG_VSIM2_EN pbit(PCAP_REG_AUXVREG, (1 << 16))
-+#define PCAP_BIT_AUXVREG_VSIM_EN pbit(PCAP_REG_AUXVREG, (1 << 17))
-+#define PCAP_BIT_AUXVREG_VSIM_0 pbit(PCAP_REG_AUXVREG, (1 << 18))
-+#define PCAP_BIT_AUXVREG_V_VIB_EN pbit(PCAP_REG_AUXVREG, (1 << 19))
-+#define PCAP_AUXVREG_V_VIB_MASK 0x00300000
-+#define PCAP_AUXVREG_V_VIB_SHIFT 20
-+#define PCAP_BIT_AUXVREG_VAUX1_STBY pbit(PCAP_REG_AUXVREG, (1 << 22))
-+#define PCAP_BIT_AUXVREG_VAUX1_LOWPWR pbit(PCAP_REG_AUXVREG, (1 << 23))
-+#define PCAP_BIT_AUXVREG_SW3_STBY pbit(PCAP_REG_AUXVREG, (1 << 24))
-+
-+#define PCAP_BATT_DAC_MASK 0x000000ff
-+#define PCAP_BATT_DAC_SHIFT 0
-+#define PCAP_BIT_BATT_B_FDBK pbit(PCAP_REG_BATT, (1 << 8))
-+#define PCAP_BIT_BATT_EXT_ISENSE pbit(PCAP_REG_BATT, (1 << 9))
-+#define PCAP_BATT_V_COIN_MASK 0x00003c00
-+#define PCAP_BATT_V_COIN_SHIFT 10
-+#define PCAP_BIT_BATT_I_COIN pbit(PCAP_REG_BATT, (1 << 14))
-+#define PCAP_BIT_BATT_COIN_CH_EN pbit(PCAP_REG_BATT, (1 << 15))
-+#define PCAP_BATT_EOL_SEL_MASK 0x000e0000
-+#define PCAP_BATT_EOL_SEL_SHIFT 17
-+#define PCAP_BIT_BATT_EOL_CMP_EN pbit(PCAP_REG_BATT, (1 << 20))
-+#define PCAP_BIT_BATT_BATT_DET_EN pbit(PCAP_REG_BATT, (1 << 21))
-+#define PCAP_BIT_BATT_THERMBIAS_CTRL pbit(PCAP_REG_BATT, (1 << 22))
-+
-+#define PCAP_BIT_ADC1_ADEN pbit(PCAP_REG_ADC1, (1 << 0))
-+#define PCAP_BIT_ADC1_RAND pbit(PCAP_REG_ADC1, (1 << 1))
-+#define PCAP_BIT_ADC1_AD_SEL1 pbit(PCAP_REG_ADC1, (1 << 2))
-+#define PCAP_BIT_ADC1_AD_SEL2 pbit(PCAP_REG_ADC1, (1 << 3))
-+#define PCAP_ADC1_ADA1_MASK 0x00000070
-+#define PCAP_ADC1_ADA1_SHIFT 4
-+#define PCAP_ADC1_ADA2_MASK 0x00000380
-+#define PCAP_ADC1_ADA2_SHIFT 7
-+#define PCAP_ADC1_ATO_MASK 0x00003c00
-+#define PCAP_ADC1_ATO_SHIFT 10
-+#define PCAP_BIT_ADC1_ATOX pbit(PCAP_REG_ADC1, (1 << 14))
-+#define PCAP_BIT_ADC1_MTR1 pbit(PCAP_REG_ADC1, (1 << 15))
-+#define PCAP_BIT_ADC1_MTR2 pbit(PCAP_REG_ADC1, (1 << 16))
-+#define PCAP_ADC1_TS_M_MASK 0x000e0000
-+#define PCAP_ADC1_TS_M_SHIFT 17
-+#define PCAP_BIT_ADC1_TS_REF_LOWPWR pbit(PCAP_REG_ADC1, (1 << 20))
-+#define PCAP_BIT_ADC1_TS_REFENB pbit(PCAP_REG_ADC1, (1 << 21))
-+#define PCAP_BIT_ADC1_BATT_I_POLARITY pbit(PCAP_REG_ADC1, (1 << 22))
-+#define PCAP_BIT_ADC1_BATT_I_ADC pbit(PCAP_REG_ADC1, (1 << 23))
-+
-+#define PCAP_ADC2_ADD1_MASK 0x000003ff
-+#define PCAP_ADC2_ADD1_SHIFT 0
-+#define PCAP_ADC2_ADD2_MASK 0x000ffc00
-+#define PCAP_ADC2_ADD2_SHIFT 10
-+#define PCAP_BIT_ADC2_ADINC1 pbit(PCAP_REG_ADC2, (1 << 20))
-+#define PCAP_BIT_ADC2_ADINC2 pbit(PCAP_REG_ADC2, (1 << 21))
-+#define PCAP_BIT_ADC2_ASC pbit(PCAP_REG_ADC2, (1 << 22))
-+
-+#define PCAP_BIT_BUSCTRL_FSENB 0x50000001
-+#define PCAP_BIT_BUSCTRL_USB_SUSPEND 0x50000002
-+#define PCAP_BIT_BUSCTRL_USB_PU 0x50000004
-+#define PCAP_BIT_BUSCTRL_USB_PD 0x50000008
-+#define PCAP_BIT_BUSCTRL_VUSB_EN 0x50000010
-+#define PCAP_BIT_BUSCTRL_USB_PS 0x50000020
-+#define PCAP_BIT_BUSCTRL_VUSB_MSTR_EN 0x50000040
-+#define PCAP_BIT_BUSCTRL_VBUS_PD_ENB 0x50000080
-+#define PCAP_BIT_BUSCTRL_CURRLIM 0x50000100
-+#define PCAP_BIT_BUSCTRL_RS232ENB 0x50000200
-+#define PCAP_BIT_BUSCTRL_RS232_DIR 0x50000400
-+#define PCAP_BIT_BUSCTRL_SE0_CONN 0x50000800
-+#define PCAP_BIT_BUSCTRL_USB_PDM 0x50001000
-+#define PCAP_BIT_BUSCTRL_BUS_PRI_ADJ 0x51000000
-+
-+#define PCAP_BIT_PERIPH_BL_CTRL0 0x54000001
-+#define PCAP_BIT_PERIPH_BL_CTRL1 0x54000002
-+#define PCAP_BIT_PERIPH_BL_CTRL2 0x54000004
-+#define PCAP_BIT_PERIPH_BL_CTRL3 0x54000008
-+#define PCAP_BIT_PERIPH_BL_CTRL4 0x54000010
-+#define PCAP_BIT_PERIPH_LEDR_EN 0x54000020
-+#define PCAP_BIT_PERIPH_LEDG_EN 0x54000040
-+#define PCAP_BIT_PERIPH_LEDR_CTRL0 0x54000080
-+#define PCAP_BIT_PERIPH_LEDR_CTRL1 0x54000100
-+#define PCAP_BIT_PERIPH_LEDR_CTRL2 0x54000200
-+#define PCAP_BIT_PERIPH_LEDR_CTRL3 0x54000400
-+#define PCAP_BIT_PERIPH_LEDG_CTRL0 0x54000800
-+#define PCAP_BIT_PERIPH_LEDG_CTRL1 0x54001000
-+#define PCAP_BIT_PERIPH_LEDG_CTRL2 0x54002000
-+#define PCAP_BIT_PERIPH_LEDG_CTRL3 0x54004000
-+#define PCAP_BIT_PERIPH_LEDR_I0 0x54008000
-+#define PCAP_BIT_PERIPH_LEDR_I1 0x54010000
-+#define PCAP_BIT_PERIPH_LEDG_I0 0x54020000
-+#define PCAP_BIT_PERIPH_LEDG_I1 0x54040000
-+#define PCAP_BIT_PERIPH_SKIP 0x54080000
-+#define PCAP_BIT_PERIPH_BL2_CTRL0 0x54100000
-+#define PCAP_BIT_PERIPH_BL2_CTRL1 0x54200000
-+#define PCAP_BIT_PERIPH_BL2_CTRL2 0x54400000
-+#define PCAP_BIT_PERIPH_BL2_CTRL3 0x54800000
-+#define PCAP_BIT_PERIPH_BL2_CTRL4 0x55000000
-+
-+#define PCAP_BIT_LOWPWR_VAUX2_STBY 0x60000001
-+#define PCAP_BIT_LOWPWR_VAUX2_LOWPWR 0x60000002
-+#define PCAP_BIT_LOWPWR_VAUX3_STBY 0x60000004
-+#define PCAP_BIT_LOWPWR_VAUX3_LOWPWR 0x60000008
-+#define PCAP_BIT_LOWPWR_VAUX4_STBY 0x60000010
-+#define PCAP_BIT_LOWPWR_VAUX4_LOWPWR 0x60000020
-+#define PCAP_BIT_LOWPWR_VSIM_LOWPWR 0x60000040
-+#define PCAP_BIT_LOWPWR_VSIM2_LOWPWR 0x60000080
-+#define PCAP_BIT_LOWPWR_SW1_MODE00 0x60000100
-+#define PCAP_BIT_LOWPWR_SW1_MODE01 0x60000200
-+#define PCAP_BIT_LOWPWR_SW1_MODE10 0x60000400
-+#define PCAP_BIT_LOWPWR_SW1_MODE11 0x60000800
-+#define PCAP_BIT_LOWPWR_SW10_DVS 0x60001000
-+#define PCAP_BIT_LOWPWR_SW11_DVS 0x60002000
-+#define PCAP_BIT_LOWPWR_SW12_DVS 0x60004000
-+#define PCAP_BIT_LOWPWR_SW13_DVS 0x60008000
-+#define PCAP_BIT_LOWPWR_SW2_MODE00 0x60010000
-+#define PCAP_BIT_LOWPWR_SW2_MODE01 0x60020000
-+#define PCAP_BIT_LOWPWR_SW2_MODE10 0x60040000
-+#define PCAP_BIT_LOWPWR_SW2_MODE11 0x60080000
-+#define PCAP_BIT_LOWPWR_SW20_DVS 0x60100000
-+#define PCAP_BIT_LOWPWR_SW21_DVS 0x60200000
-+#define PCAP_BIT_LOWPWR_SW22_DVS 0x60400000
-+#define PCAP_BIT_LOWPWR_SW23_DVS 0x60800000
-+#define PCAP_BIT_LOWPWR_VC_STBY 0x61000000
-+
-+extern int ezx_pcap_write(u_int8_t, u_int32_t);
-+extern int ezx_pcap_read(u_int8_t, u_int32_t *);
-+extern int ezx_pcap_bit_set(u_int32_t, u_int8_t);
-+extern int ezx_pcap_bit_get(u_int32_t);
-+extern int ezx_pcap_read_bit(u_int32_t);
-+extern void ezx_pcap_vibrator_level(u_int32_t);
-+#endif
-Index: linux-2.6.24/include/asm-arm/arch-pxa/irqs.h
-===================================================================
---- linux-2.6.24.orig/include/asm-arm/arch-pxa/irqs.h
-+++ linux-2.6.24/include/asm-arm/arch-pxa/irqs.h
-@@ -89,7 +89,7 @@
- * within sensible limits.
- */
- #define IRQ_BOARD_START (PXA_GPIO_IRQ_BASE + PXA_GPIO_IRQ_NUM)
--#define IRQ_BOARD_END (IRQ_BOARD_START + 16)
-+#define IRQ_BOARD_END (IRQ_BOARD_START + 22)
-
- #define IRQ_SA1111_START (IRQ_BOARD_END)
- #define IRQ_GPAIN0 (IRQ_BOARD_END + 0)
-@@ -180,7 +180,8 @@
- #define NR_IRQS (IRQ_LOCOMO_SPI_TEND + 1)
- #elif defined(CONFIG_ARCH_LUBBOCK) || \
- defined(CONFIG_MACH_LOGICPD_PXA270) || \
-- defined(CONFIG_MACH_MAINSTONE)
-+ defined(CONFIG_MACH_MAINSTONE) || \
-+ defined(CONFIG_PXA_EZX)
- #define NR_IRQS (IRQ_BOARD_END)
- #else
- #define NR_IRQS (IRQ_BOARD_START)
-@@ -227,6 +228,31 @@
- #define IRQ_LOCOMO_LT_BASE (IRQ_BOARD_START + 2)
- #define IRQ_LOCOMO_SPI_BASE (IRQ_BOARD_START + 3)
-
-+/* EZX Interrupts (CONFIG_EZX) */
-+#define EZX_IRQ(x) (IRQ_BOARD_START + (x))
-+#define EZX_IRQ_USB4V EZX_IRQ(0) /* EMU */
-+#define EZX_IRQ_USB1V EZX_IRQ(1) /* EMU */
-+#define EZX_IRQ_HEADJACK EZX_IRQ(2) /* Audio connector */
-+#define EZX_IRQ_MIC EZX_IRQ(3) /* Audio connector */
-+#define EZX_IRQ_ADCDONE EZX_IRQ(4)
-+#define EZX_IRQ_TS EZX_IRQ(5) /* TS touch */
-+#define EZX_IRQ_ADCDONE2 EZX_IRQ(6) /* TS x/y ADC ready */
-+#define EZX_IRQ_WH EZX_IRQ(7)
-+#define EZX_IRQ_WL EZX_IRQ(8)
-+#define EZX_IRQ_ONOFF EZX_IRQ(9)
-+#define EZX_IRQ_ONOFF2 EZX_IRQ(10)
-+#define EZX_IRQ_MOBPORT EZX_IRQ(11)
-+#define EZX_IRQ_TODA EZX_IRQ(12)
-+#define EZX_IRQ_1HZ EZX_IRQ(13)
-+#define EZX_IRQ_MNEXB EZX_IRQ(14)
-+#define EZX_IRQ_ST EZX_IRQ(15)
-+#define EZX_IRQ_PC EZX_IRQ(16)
-+#define EZX_IRQ_SYSRST EZX_IRQ(17)
-+#define EZX_IRQ_SOFTRESET EZX_IRQ(18)
-+#define EZX_IRQ_EOL EZX_IRQ(19)
-+#define EZX_IRQ_CLK EZX_IRQ(20)
-+#define EZX_IRQ_WARM EZX_IRQ(21)
-+
- /* ITE8152 irqs */
- /* add IT8152 IRQs beyond BOARD_END */
- #ifdef CONFIG_PCI_HOST_ITE8152
-Index: linux-2.6.24/arch/arm/mach-pxa/Kconfig
-===================================================================
---- linux-2.6.24.orig/arch/arm/mach-pxa/Kconfig
-+++ linux-2.6.24/arch/arm/mach-pxa/Kconfig
-@@ -139,6 +139,9 @@
- This enables control code for the BP (baseband processor) found in
- Motorola's EZX smartphone platform.
-
-+config EZX_PCAP
-+ bool "PCAP Support"
-+
- endif
-
- endmenu
-Index: linux-2.6.24/arch/arm/mach-pxa/Makefile
-===================================================================
---- linux-2.6.24.orig/arch/arm/mach-pxa/Makefile
-+++ linux-2.6.24/arch/arm/mach-pxa/Makefile
-@@ -37,6 +37,7 @@
- obj-$(CONFIG_PXA_EZX_A1200) += ezx-a1200.o
- obj-$(CONFIG_PXA_EZX_E6) += ezx-e6.o
- obj-$(CONFIG_EZX_BP) += ezx-bp.o
-+obj-$(CONFIG_EZX_PCAP) += ezx-pcap.o
-
- # Support for blinky lights
- led-y := leds.o