diff options
Diffstat (limited to 'packages/linux/linux-2.6.22')
14 files changed, 6529 insertions, 0 deletions
diff --git a/packages/linux/linux-2.6.22/.mtn2git_empty b/packages/linux/linux-2.6.22/.mtn2git_empty new file mode 100644 index 0000000000..e69de29bb2 --- /dev/null +++ b/packages/linux/linux-2.6.22/.mtn2git_empty diff --git a/packages/linux/linux-2.6.22/bd-neon/.mtn2git_empty b/packages/linux/linux-2.6.22/bd-neon/.mtn2git_empty new file mode 100644 index 0000000000..e69de29bb2 --- /dev/null +++ b/packages/linux/linux-2.6.22/bd-neon/.mtn2git_empty diff --git a/packages/linux/linux-2.6.22/bd-neon/defconfig b/packages/linux/linux-2.6.22/bd-neon/defconfig new file mode 100644 index 0000000000..9bd82a5e2d --- /dev/null +++ b/packages/linux/linux-2.6.22/bd-neon/defconfig @@ -0,0 +1,1326 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.19.2 +# Thu May 24 16:14:49 2007 +# +CONFIG_ARM=y +# CONFIG_GENERIC_TIME is not set +CONFIG_MMU=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ARCH_MTD_XIP=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +# CONFIG_SWAP is not set +# CONFIG_SYSVIPC is not set +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set +# CONFIG_AUDIT is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +# CONFIG_RELAY is not set +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SHMEM=y +CONFIG_SLAB=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y + +# +# Block layer +# +CONFIG_BLOCK=y +# CONFIG_BLK_DEV_IO_TRACE is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_PNX4008 is not set +CONFIG_ARCH_PXA=y +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_OMAP is not set + +# +# Intel PXA2xx Implementations +# +# CONFIG_ARCH_LUBBOCK is not set +# CONFIG_MACH_LOGICPD_PXA270 is not set +# CONFIG_MACH_MAINSTONE is not set +# CONFIG_MACH_ARGON is not set +CONFIG_MACH_NEON=y +# CONFIG_ARCH_PXA_IDP is not set +# CONFIG_PXA_SHARPSL is not set +# CONFIG_MACH_TRIZEPS4 is not set +CONFIG_PXA25x=y + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_XSCALE=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5T=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +# CONFIG_ARM_THUMB is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +CONFIG_XSCALE_PMU=y + +# +# Bus support +# + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +# CONFIG_PREEMPT is not set +# CONFIG_NO_IDLE_HZ is not set +CONFIG_HZ=100 +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="" +# CONFIG_XIP_KERNEL is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set +# CONFIG_ARTHUR is not set + +# +# Power management options +# +# CONFIG_PM is not set +# CONFIG_APM is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_NETDEBUG is not set +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +CONFIG_IEEE80211=y +CONFIG_IEEE80211_DEBUG=y +CONFIG_IEEE80211_CRYPT_WEP=y +CONFIG_IEEE80211_CRYPT_CCMP=y +CONFIG_IEEE80211_CRYPT_TKIP=y +CONFIG_IEEE80211_SOFTMAC=y +CONFIG_IEEE80211_SOFTMAC_DEBUG=y +CONFIG_WIRELESS_EXT=y + +# +# Device Drivers +# + +# +# Generic Driver Options +# +# CONFIG_STANDALONE is not set +# CONFIG_PREVENT_FIRMWARE_BUILD is not set +CONFIG_FW_LOADER=y +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_SYS_HYPERVISOR is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +CONFIG_CONNECTOR=y +# CONFIG_PROC_EVENTS is not set + +# +# Memory Technology Devices (MTD) +# +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +# CONFIG_MTD_BLOCK is not set +CONFIG_MTD_BLOCK_RO=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_CFI_INTELEXT=y +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_OBSOLETE_CHIPS is not set +# CONFIG_MTD_XIP is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_START=0x0 +CONFIG_MTD_PHYSMAP_LEN=0x2000000 +CONFIG_MTD_PHYSMAP_BANKWIDTH=4 +# CONFIG_MTD_ARM_INTEGRATOR is not set +# CONFIG_MTD_SHARP_SL is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set + +# +# NAND Flash Device Drivers +# +# CONFIG_MTD_NAND is not set + +# +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=8192 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +CONFIG_BLK_DEV_INITRD=y +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set + +# +# SCSI low-level drivers +# +# CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_DEBUG is not set + +# +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# +# CONFIG_ATA is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# + +# +# I2O device support +# + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# PHY device support +# +# CONFIG_PHYLIB is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +CONFIG_SMC91X=y +# CONFIG_DM9000 is not set +# CONFIG_SMC911X is not set + +# +# Ethernet (1000 Mbit) +# + +# +# Ethernet (10000 Mbit) +# + +# +# Token Ring devices +# + +# +# Wireless LAN (non-hamradio) +# +CONFIG_NET_RADIO=y +CONFIG_NET_WIRELESS_RTNETLINK=y + +# +# Obsolete Wireless cards support (pre-802.11) +# +# CONFIG_STRIP is not set +# CONFIG_USB_ZD1201 is not set +# CONFIG_HOSTAP is not set +CONFIG_ZD1211RW=m +# CONFIG_ZD1211RW_DEBUG is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_ATKBD=y +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +CONFIG_INPUT_MOUSE=y +CONFIG_MOUSE_PS2=y +# CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_VSXXXAA is not set +CONFIG_INPUT_JOYSTICK=y +# CONFIG_JOYSTICK_ANALOG is not set +# CONFIG_JOYSTICK_A3D is not set +# CONFIG_JOYSTICK_ADI is not set +# CONFIG_JOYSTICK_COBRA is not set +# CONFIG_JOYSTICK_GF2K is not set +# CONFIG_JOYSTICK_GRIP is not set +# CONFIG_JOYSTICK_GRIP_MP is not set +# CONFIG_JOYSTICK_GUILLEMOT is not set +# CONFIG_JOYSTICK_INTERACT is not set +# CONFIG_JOYSTICK_SIDEWINDER is not set +# CONFIG_JOYSTICK_TMDC is not set +# CONFIG_JOYSTICK_IFORCE is not set +# CONFIG_JOYSTICK_WARRIOR is not set +# CONFIG_JOYSTICK_MAGELLAN is not set +# CONFIG_JOYSTICK_SPACEORB is not set +# CONFIG_JOYSTICK_SPACEBALL is not set +# CONFIG_JOYSTICK_STINGER is not set +# CONFIG_JOYSTICK_TWIDJOY is not set +# CONFIG_JOYSTICK_JOYDUMP is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +# CONFIG_SERIO_SERPORT is not set +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_PXA_GPIO=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_PXA=y +CONFIG_SERIAL_PXA_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_NOWAYOUT=y + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_SA1100_WATCHDOG=y +# CONFIG_SA1100_WATCHDOG_TICK is not set + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set +CONFIG_HW_RANDOM=y +# CONFIG_NVRAM is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set + +# +# I2C support +# +# CONFIG_I2C is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Misc devices +# +CONFIG_BD_GENTIMER=y +# CONFIG_TIFM_CORE is not set + +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set +# CONFIG_USB_DABUSB is not set + +# +# Graphics support +# +CONFIG_FIRMWARE_EDID=y +CONFIG_FB=y +# CONFIG_FB_CFB_FILLRECT is not set +# CONFIG_FB_CFB_COPYAREA is not set +# CONFIG_FB_CFB_IMAGEBLIT is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_PXA is not set +# CONFIG_FB_MBX is not set +CONFIG_FB_SM501=y +CONFIG_FB_SM501MEM=y +CONFIG_FB_SM501YUV=y +CONFIG_FB_SM501ALPHA=y +# CONFIG_FB_VIRTUAL is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +CONFIG_FONTS=y +# CONFIG_FONT_8x8 is not set +CONFIG_FONT_8x16=y +# CONFIG_FONT_6x11 is not set +# CONFIG_FONT_7x14 is not set +# CONFIG_FONT_PEARL_8x8 is not set +# CONFIG_FONT_ACORN_8x8 is not set +# CONFIG_FONT_MINI_4x6 is not set +# CONFIG_FONT_SUN8x16 is not set +# CONFIG_FONT_SUN12x22 is not set +# CONFIG_FONT_10x18 is not set + +# +# Logo configuration +# +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +CONFIG_LOGO_LINUX_CLUT224=y +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Sound +# +CONFIG_SOUND=y + +# +# Advanced Linux Sound Architecture +# +CONFIG_SND=y +CONFIG_SND_TIMER=y +CONFIG_SND_PCM=y +# CONFIG_SND_SEQUENCER is not set +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=y +CONFIG_SND_PCM_OSS=y +CONFIG_SND_PCM_OSS_PLUGINS=y +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +CONFIG_SND_VERBOSE_PRINTK=y +CONFIG_SND_DEBUG=y +# CONFIG_SND_DEBUG_DETECT is not set +# CONFIG_SND_PCM_XRUN_DEBUG is not set + +# +# Generic devices +# +CONFIG_SND_AC97_CODEC=y +CONFIG_SND_AC97_BUS=y +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set + +# +# ALSA ARM devices +# +CONFIG_SND_PXA2XX_PCM=y +CONFIG_SND_PXA2XX_AC97=y + +# +# USB devices +# +# CONFIG_SND_USB_AUDIO is not set + +# +# Open Sound System +# +# CONFIG_SOUND_PRIME is not set + +# +# Multimedia Capabilities Port drivers +# +CONFIG_UCB1400_TS=y +# CONFIG_UCB1400_TS_FIVE_WIRE is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +# CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_BANDWIDTH is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_SM501=y +# CONFIG_USB_SL811_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +CONFIG_USB_PRINTER=y + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +CONFIG_USB_LIBUSUAL=y + +# +# USB Input Devices +# +CONFIG_USB_HID=y +CONFIG_USB_HIDINPUT=y +# CONFIG_USB_HIDINPUT_POWERBOOK is not set +# CONFIG_HID_FF is not set +CONFIG_USB_HIDDEV=y +# CONFIG_USB_AIPTEK is not set +# CONFIG_USB_WACOM is not set +# CONFIG_USB_ACECAD is not set +# CONFIG_USB_KBTAB is not set +# CONFIG_USB_POWERMATE is not set +# CONFIG_USB_TOUCHSCREEN is not set +# CONFIG_USB_YEALINK is not set +# CONFIG_USB_XPAD is not set +# CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_ATI_REMOTE2 is not set +# CONFIG_USB_KEYSPAN_REMOTE is not set +# CONFIG_USB_APPLETOUCH is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +CONFIG_USB_PEGASUS=y +CONFIG_USB_RTL8150=y +# CONFIG_USB_USBNET_MII is not set +# CONFIG_USB_USBNET is not set +# CONFIG_USB_MON is not set + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +CONFIG_USB_SERIAL=m +CONFIG_USB_SERIAL_GENERIC=y +# CONFIG_USB_SERIAL_AIRCABLE is not set +# CONFIG_USB_SERIAL_AIRPRIME is not set +# CONFIG_USB_SERIAL_ARK3116 is not set +# CONFIG_USB_SERIAL_BELKIN is not set +# CONFIG_USB_SERIAL_WHITEHEAT is not set +# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set +# CONFIG_USB_SERIAL_CP2101 is not set +# CONFIG_USB_SERIAL_CYPRESS_M8 is not set +# CONFIG_USB_SERIAL_EMPEG is not set +# CONFIG_USB_SERIAL_FTDI_SIO is not set +# CONFIG_USB_SERIAL_FUNSOFT is not set +# CONFIG_USB_SERIAL_VISOR is not set +# CONFIG_USB_SERIAL_IPAQ is not set +# CONFIG_USB_SERIAL_IR is not set +# CONFIG_USB_SERIAL_EDGEPORT is not set +# CONFIG_USB_SERIAL_EDGEPORT_TI is not set +# CONFIG_USB_SERIAL_GARMIN is not set +# CONFIG_USB_SERIAL_IPW is not set +# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set +CONFIG_USB_SERIAL_KEYSPAN=m +# CONFIG_USB_SERIAL_KEYSPAN_MPR is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set +CONFIG_USB_SERIAL_KEYSPAN_USA19=y +# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA19QW is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA19QI is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA49WLC is not set +# CONFIG_USB_SERIAL_KLSI is not set +# CONFIG_USB_SERIAL_KOBIL_SCT is not set +# CONFIG_USB_SERIAL_MCT_U232 is not set +# CONFIG_USB_SERIAL_MOS7720 is not set +# CONFIG_USB_SERIAL_MOS7840 is not set +# CONFIG_USB_SERIAL_NAVMAN is not set +# CONFIG_USB_SERIAL_PL2303 is not set +# CONFIG_USB_SERIAL_HP4X is not set +# CONFIG_USB_SERIAL_SAFE is not set +# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set +# CONFIG_USB_SERIAL_TI is not set +# CONFIG_USB_SERIAL_CYBERJACK is not set +# CONFIG_USB_SERIAL_XIRCOM is not set +# CONFIG_USB_SERIAL_OPTION is not set +# CONFIG_USB_SERIAL_OMNINET is not set +CONFIG_USB_EZUSB=y +CONFIG_AT91SAM7X=m +CONFIG_AT91SAM7X_SERIAL=m +CONFIG_AT91SAM7X_FLASH=m +CONFIG_AT91SAM7X_FRAM=m +CONFIG_AT91SAM7X_ETHER=m + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_TEST is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG_FILES is not set +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_NET2280 is not set +CONFIG_USB_GADGET_PXA2XX=y +CONFIG_USB_PXA2XX=y +CONFIG_USB_PXA2XX_SMALL=y +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +# CONFIG_USB_GADGET_DUALSPEED is not set +# CONFIG_USB_ZERO is not set +# CONFIG_USB_ETH is not set +# CONFIG_USB_GADGETFS is not set +# CONFIG_USB_FILE_STORAGE is not set +CONFIG_USB_G_SERIAL=y +# CONFIG_USB_MIDI_GADGET is not set + +# +# MMC/SD Card support +# +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +CONFIG_MMC_BLOCK=y +CONFIG_MMC_PXA=y +# CONFIG_MMC_TIFM_SD is not set + +# +# Real Time Clock +# +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +CONFIG_JFFS2_SUMMARY=y +CONFIG_CRAMFS=y +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +# CONFIG_NFS_V3 is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +CONFIG_NLS_UTF8=y + +# +# Profiling support +# +CONFIG_PROFILING=y +CONFIG_OPROFILE=y + +# +# Kernel hacking +# +CONFIG_PRINTK_TIME=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_KERNEL=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +CONFIG_DEBUG_SPINLOCK=y +CONFIG_DEBUG_MUTEXES=y +CONFIG_DEBUG_RWSEMS=y +CONFIG_DEBUG_SPINLOCK_SLEEP=y +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_FS is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +CONFIG_FRAME_POINTER=y +CONFIG_FORCED_INLINING=y +# CONFIG_HEADERS_CHECK is not set +# CONFIG_RCU_TORTURE_TEST is not set +CONFIG_DEBUG_USER=y +CONFIG_DEBUG_WAITQ=y +CONFIG_DEBUG_ERRORS=y +CONFIG_DEBUG_LL=y +# CONFIG_DEBUG_ICEDCC is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +CONFIG_CRYPTO_ECB=y +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +CONFIG_CRYPTO_AES=y +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +CONFIG_CRYPTO_ARC4=y +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_DEFLATE is not set +CONFIG_CRYPTO_MICHAEL_MIC=y +CONFIG_CRYPTO_CRC32C=y +# CONFIG_CRYPTO_TEST is not set + +# +# Hardware crypto devices +# + +# +# Library routines +# +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +CONFIG_LIBCRC32C=y +CONFIG_ZLIB_INFLATE=y +CONFIG_PLIST=y diff --git a/packages/linux/linux-2.6.22/cm-x270/.mtn2git_empty b/packages/linux/linux-2.6.22/cm-x270/.mtn2git_empty new file mode 100644 index 0000000000..e69de29bb2 --- /dev/null +++ b/packages/linux/linux-2.6.22/cm-x270/.mtn2git_empty diff --git a/packages/linux/linux-2.6.22/cm-x270/0001-cm-x270-base2.patch b/packages/linux/linux-2.6.22/cm-x270/0001-cm-x270-base2.patch new file mode 100644 index 0000000000..9a635c5cbc --- /dev/null +++ b/packages/linux/linux-2.6.22/cm-x270/0001-cm-x270-base2.patch @@ -0,0 +1,2850 @@ +From 0db989f536f29c343bb4e42dc0b34d892d86de60 Mon Sep 17 00:00:00 2001 +From: Cliff Brake <cbrake@happy.dev.bec-systems.com> +Date: Fri, 20 Jul 2007 18:55:59 -0400 +Subject: [PATCH] cm-x270-base2 + +--- + arch/arm/Kconfig | 8 +- + arch/arm/configs/cm_x270_defconfig | 1567 +++++++++++++++++++++++++++++++++++ + arch/arm/mach-pxa/Kconfig | 5 + + arch/arm/mach-pxa/Makefile | 7 + + arch/arm/mach-pxa/cm-x270.c | 821 ++++++++++++++++++ + drivers/leds/Kconfig | 6 + + drivers/leds/Makefile | 1 + + drivers/leds/leds-cm-x270.c | 126 +++ + drivers/net/Kconfig | 8 + + drivers/net/dm9000.c | 6 + + include/asm-arm/arch-pxa/cm-x270.h | 71 ++ + include/asm-arm/arch-pxa/hardware.h | 11 + + include/asm-arm/arch-pxa/irqs.h | 20 + + include/asm-arm/memory.h | 10 + + 14 files changed, 2666 insertions(+), 1 deletions(-) + create mode 100644 arch/arm/configs/cm_x270_defconfig + create mode 100644 arch/arm/mach-pxa/cm-x270.c + create mode 100644 drivers/leds/leds-cm-x270.c + create mode 100644 include/asm-arm/arch-pxa/cm-x270.h + +diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig +index 50d9f3e..dec0a27 100644 +--- a/arch/arm/Kconfig ++++ b/arch/arm/Kconfig +@@ -519,7 +519,7 @@ config ISA_DMA_API + bool + + config PCI +- bool "PCI support" if ARCH_INTEGRATOR_AP || ARCH_VERSATILE_PB || ARCH_IXP4XX || ARCH_KS8695 ++ bool "PCI support" if ARCH_INTEGRATOR_AP || ARCH_VERSATILE_PB || ARCH_IXP4XX || ARCH_KS8695 || MACH_ARMCORE + help + Find out whether you have a PCI motherboard. PCI is the name of a + bus system, i.e. the way the CPU talks to the other stuff inside +@@ -537,6 +537,12 @@ config PCI_HOST_VIA82C505 + depends on PCI && ARCH_SHARK + default y + ++config PCI_HOST_ITE8152 ++ bool ++ depends on PCI && MACH_ARMCORE ++ default y ++ select DMABOUNCE ++ + source "drivers/pci/Kconfig" + + source "drivers/pcmcia/Kconfig" +diff --git a/arch/arm/configs/cm_x270_defconfig b/arch/arm/configs/cm_x270_defconfig +new file mode 100644 +index 0000000..f728363 +--- /dev/null ++++ b/arch/arm/configs/cm_x270_defconfig +@@ -0,0 +1,1567 @@ ++# ++# Automatically generated make config: don't edit ++# Linux kernel version: 2.6.21-rc4 ++# Wed Apr 4 16:42:03 2007 ++# ++CONFIG_ARM=y ++CONFIG_SYS_SUPPORTS_APM_EMULATION=y ++CONFIG_GENERIC_GPIO=y ++CONFIG_GENERIC_TIME=y ++CONFIG_MMU=y ++# CONFIG_NO_IOPORT is not set ++CONFIG_GENERIC_HARDIRQS=y ++CONFIG_TRACE_IRQFLAGS_SUPPORT=y ++CONFIG_HARDIRQS_SW_RESEND=y ++CONFIG_GENERIC_IRQ_PROBE=y ++CONFIG_RWSEM_GENERIC_SPINLOCK=y ++# CONFIG_ARCH_HAS_ILOG2_U32 is not set ++# CONFIG_ARCH_HAS_ILOG2_U64 is not set ++CONFIG_GENERIC_HWEIGHT=y ++CONFIG_GENERIC_CALIBRATE_DELAY=y ++CONFIG_ZONE_DMA=y ++CONFIG_ARCH_MTD_XIP=y ++CONFIG_VECTORS_BASE=0xffff0000 ++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" ++ ++# ++# Code maturity level options ++# ++CONFIG_EXPERIMENTAL=y ++CONFIG_BROKEN_ON_SMP=y ++CONFIG_INIT_ENV_ARG_LIMIT=32 ++ ++# ++# General setup ++# ++CONFIG_LOCALVERSION="" ++# CONFIG_LOCALVERSION_AUTO is not set ++CONFIG_SWAP=y ++CONFIG_SYSVIPC=y ++# CONFIG_IPC_NS is not set ++CONFIG_SYSVIPC_SYSCTL=y ++# CONFIG_POSIX_MQUEUE is not set ++# CONFIG_BSD_PROCESS_ACCT is not set ++# CONFIG_TASKSTATS is not set ++# CONFIG_UTS_NS is not set ++# CONFIG_AUDIT is not set ++CONFIG_IKCONFIG=y ++CONFIG_IKCONFIG_PROC=y ++CONFIG_SYSFS_DEPRECATED=y ++# CONFIG_RELAY is not set ++CONFIG_BLK_DEV_INITRD=y ++CONFIG_INITRAMFS_SOURCE="" ++CONFIG_CC_OPTIMIZE_FOR_SIZE=y ++CONFIG_SYSCTL=y ++CONFIG_EMBEDDED=y ++CONFIG_UID16=y ++CONFIG_SYSCTL_SYSCALL=y ++CONFIG_KALLSYMS=y ++# CONFIG_KALLSYMS_ALL is not set ++# CONFIG_KALLSYMS_EXTRA_PASS is not set ++CONFIG_HOTPLUG=y ++CONFIG_PRINTK=y ++CONFIG_BUG=y ++CONFIG_ELF_CORE=y ++CONFIG_BASE_FULL=y ++CONFIG_FUTEX=y ++CONFIG_EPOLL=y ++CONFIG_SHMEM=y ++CONFIG_SLAB=y ++CONFIG_VM_EVENT_COUNTERS=y ++CONFIG_RT_MUTEXES=y ++# CONFIG_TINY_SHMEM is not set ++CONFIG_BASE_SMALL=0 ++# CONFIG_SLOB is not set ++ ++# ++# Loadable module support ++# ++CONFIG_MODULES=y ++CONFIG_MODULE_UNLOAD=y ++CONFIG_MODULE_FORCE_UNLOAD=y ++# CONFIG_MODVERSIONS is not set ++# CONFIG_MODULE_SRCVERSION_ALL is not set ++CONFIG_KMOD=y ++ ++# ++# Block layer ++# ++CONFIG_BLOCK=y ++# CONFIG_LBD is not set ++# CONFIG_BLK_DEV_IO_TRACE is not set ++# CONFIG_LSF is not set ++ ++# ++# IO Schedulers ++# ++CONFIG_IOSCHED_NOOP=y ++CONFIG_IOSCHED_AS=y ++CONFIG_IOSCHED_DEADLINE=y ++CONFIG_IOSCHED_CFQ=y ++CONFIG_DEFAULT_AS=y ++# CONFIG_DEFAULT_DEADLINE is not set ++# CONFIG_DEFAULT_CFQ is not set ++# CONFIG_DEFAULT_NOOP is not set ++CONFIG_DEFAULT_IOSCHED="anticipatory" ++ ++# ++# System Type ++# ++# CONFIG_ARCH_AAEC2000 is not set ++# CONFIG_ARCH_INTEGRATOR is not set ++# CONFIG_ARCH_REALVIEW is not set ++# CONFIG_ARCH_VERSATILE is not set ++# CONFIG_ARCH_AT91 is not set ++# CONFIG_ARCH_CLPS7500 is not set ++# CONFIG_ARCH_CLPS711X is not set ++# CONFIG_ARCH_CO285 is not set ++# CONFIG_ARCH_EBSA110 is not set ++# CONFIG_ARCH_EP93XX is not set ++# CONFIG_ARCH_FOOTBRIDGE is not set ++# CONFIG_ARCH_NETX is not set ++# CONFIG_ARCH_H720X is not set ++# CONFIG_ARCH_IMX is not set ++# CONFIG_ARCH_IOP32X is not set ++# CONFIG_ARCH_IOP33X is not set ++# CONFIG_ARCH_IOP13XX is not set ++# CONFIG_ARCH_IXP4XX is not set ++# CONFIG_ARCH_IXP2000 is not set ++# CONFIG_ARCH_IXP23XX is not set ++# CONFIG_ARCH_L7200 is not set ++# CONFIG_ARCH_NS9XXX is not set ++# CONFIG_ARCH_PNX4008 is not set ++CONFIG_ARCH_PXA=y ++# CONFIG_ARCH_RPC is not set ++# CONFIG_ARCH_SA1100 is not set ++# CONFIG_ARCH_S3C2410 is not set ++# CONFIG_ARCH_SHARK is not set ++# CONFIG_ARCH_LH7A40X is not set ++# CONFIG_ARCH_OMAP is not set ++CONFIG_DMABOUNCE=y ++ ++# ++# Intel PXA2xx Implementations ++# ++# CONFIG_ARCH_LUBBOCK is not set ++# CONFIG_MACH_LOGICPD_PXA270 is not set ++# CONFIG_MACH_MAINSTONE is not set ++# CONFIG_ARCH_PXA_IDP is not set ++# CONFIG_PXA_SHARPSL is not set ++# CONFIG_MACH_TRIZEPS4 is not set ++CONFIG_MACH_ARMCORE=y ++CONFIG_PXA27x=y ++ ++# ++# Processor Type ++# ++CONFIG_CPU_32=y ++CONFIG_CPU_XSCALE=y ++CONFIG_CPU_32v5=y ++CONFIG_CPU_ABRT_EV5T=y ++CONFIG_CPU_CACHE_VIVT=y ++CONFIG_CPU_TLB_V4WBI=y ++CONFIG_CPU_CP15=y ++CONFIG_CPU_CP15_MMU=y ++ ++# ++# Processor Features ++# ++CONFIG_ARM_THUMB=y ++# CONFIG_CPU_DCACHE_DISABLE is not set ++# CONFIG_OUTER_CACHE is not set ++CONFIG_IWMMXT=y ++CONFIG_XSCALE_PMU=y ++ ++# ++# Bus support ++# ++CONFIG_PCI=y ++CONFIG_PCI_HOST_ITE8152=y ++# CONFIG_PCI_DEBUG is not set ++ ++# ++# PCCARD (PCMCIA/CardBus) support ++# ++CONFIG_PCCARD=y ++# CONFIG_PCMCIA_DEBUG is not set ++CONFIG_PCMCIA=m ++# CONFIG_PCMCIA_LOAD_CIS is not set ++CONFIG_PCMCIA_IOCTL=y ++CONFIG_CARDBUS=y ++ ++# ++# PC-card bridges ++# ++# CONFIG_YENTA is not set ++# CONFIG_PD6729 is not set ++# CONFIG_I82092 is not set ++CONFIG_PCMCIA_PXA2XX=m ++ ++# ++# Kernel Features ++# ++# CONFIG_PREEMPT is not set ++# CONFIG_NO_IDLE_HZ is not set ++CONFIG_HZ=100 ++# CONFIG_AEABI is not set ++# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set ++CONFIG_SELECT_MEMORY_MODEL=y ++CONFIG_FLATMEM_MANUAL=y ++# CONFIG_DISCONTIGMEM_MANUAL is not set ++# CONFIG_SPARSEMEM_MANUAL is not set ++CONFIG_FLATMEM=y ++CONFIG_FLAT_NODE_MEM_MAP=y ++# CONFIG_SPARSEMEM_STATIC is not set ++CONFIG_SPLIT_PTLOCK_CPUS=4096 ++# CONFIG_RESOURCES_64BIT is not set ++CONFIG_ZONE_DMA_FLAG=1 ++CONFIG_ALIGNMENT_TRAP=y ++ ++# ++# Boot options ++# ++CONFIG_ZBOOT_ROM_TEXT=0x0 ++CONFIG_ZBOOT_ROM_BSS=0x0 ++CONFIG_CMDLINE="" ++# CONFIG_XIP_KERNEL is not set ++# CONFIG_KEXEC is not set ++ ++# ++# Floating point emulation ++# ++ ++# ++# At least one emulation must be selected ++# ++CONFIG_FPE_NWFPE=y ++# CONFIG_FPE_NWFPE_XP is not set ++# CONFIG_FPE_FASTFPE is not set ++ ++# ++# Userspace binary formats ++# ++CONFIG_BINFMT_ELF=y ++# CONFIG_BINFMT_AOUT is not set ++# CONFIG_BINFMT_MISC is not set ++# CONFIG_ARTHUR is not set ++ ++# ++# Power management options ++# ++CONFIG_PM=y ++# CONFIG_PM_LEGACY is not set ++# CONFIG_PM_DEBUG is not set ++# CONFIG_PM_SYSFS_DEPRECATED is not set ++# CONFIG_APM_EMULATION is not set ++ ++# ++# Networking ++# ++CONFIG_NET=y ++ ++# ++# Networking options ++# ++# CONFIG_NETDEBUG is not set ++CONFIG_PACKET=y ++# CONFIG_PACKET_MMAP is not set ++CONFIG_UNIX=y ++CONFIG_XFRM=y ++# CONFIG_XFRM_USER is not set ++# CONFIG_XFRM_SUB_POLICY is not set ++# CONFIG_XFRM_MIGRATE is not set ++# CONFIG_NET_KEY is not set ++CONFIG_INET=y ++# CONFIG_IP_MULTICAST is not set ++# CONFIG_IP_ADVANCED_ROUTER is not set ++CONFIG_IP_FIB_HASH=y ++CONFIG_IP_PNP=y ++CONFIG_IP_PNP_DHCP=y ++CONFIG_IP_PNP_BOOTP=y ++# CONFIG_IP_PNP_RARP is not set ++# CONFIG_NET_IPIP is not set ++# CONFIG_NET_IPGRE is not set ++# CONFIG_ARPD is not set ++# CONFIG_SYN_COOKIES is not set ++# CONFIG_INET_AH is not set ++# CONFIG_INET_ESP is not set ++# CONFIG_INET_IPCOMP is not set ++# CONFIG_INET_XFRM_TUNNEL is not set ++# CONFIG_INET_TUNNEL is not set ++CONFIG_INET_XFRM_MODE_TRANSPORT=y ++CONFIG_INET_XFRM_MODE_TUNNEL=y ++CONFIG_INET_XFRM_MODE_BEET=y ++CONFIG_INET_DIAG=y ++CONFIG_INET_TCP_DIAG=y ++# CONFIG_TCP_CONG_ADVANCED is not set ++CONFIG_TCP_CONG_CUBIC=y ++CONFIG_DEFAULT_TCP_CONG="cubic" ++# CONFIG_TCP_MD5SIG is not set ++# CONFIG_IPV6 is not set ++# CONFIG_INET6_XFRM_TUNNEL is not set ++# CONFIG_INET6_TUNNEL is not set ++# CONFIG_NETWORK_SECMARK is not set ++# CONFIG_NETFILTER is not set ++ ++# ++# DCCP Configuration (EXPERIMENTAL) ++# ++# CONFIG_IP_DCCP is not set ++ ++# ++# SCTP Configuration (EXPERIMENTAL) ++# ++# CONFIG_IP_SCTP is not set ++ ++# ++# TIPC Configuration (EXPERIMENTAL) ++# ++# CONFIG_TIPC is not set ++# CONFIG_ATM is not set ++# CONFIG_BRIDGE is not set ++# CONFIG_VLAN_8021Q is not set ++# CONFIG_DECNET is not set ++# CONFIG_LLC2 is not set ++# CONFIG_IPX is not set ++# CONFIG_ATALK is not set ++# CONFIG_X25 is not set ++# CONFIG_LAPB is not set ++# CONFIG_ECONET is not set ++# CONFIG_WAN_ROUTER is not set ++ ++# ++# QoS and/or fair queueing ++# ++# CONFIG_NET_SCHED is not set ++ ++# ++# Network testing ++# ++# CONFIG_NET_PKTGEN is not set ++# CONFIG_HAMRADIO is not set ++# CONFIG_IRDA is not set ++# CONFIG_BT is not set ++CONFIG_IEEE80211=m ++# CONFIG_IEEE80211_DEBUG is not set ++CONFIG_IEEE80211_CRYPT_WEP=m ++CONFIG_IEEE80211_CRYPT_CCMP=m ++# CONFIG_IEEE80211_CRYPT_TKIP is not set ++# CONFIG_IEEE80211_SOFTMAC is not set ++CONFIG_WIRELESS_EXT=y ++ ++# ++# Device Drivers ++# ++ ++# ++# Generic Driver Options ++# ++CONFIG_STANDALONE=y ++CONFIG_PREVENT_FIRMWARE_BUILD=y ++CONFIG_FW_LOADER=y ++# CONFIG_DEBUG_DRIVER is not set ++# CONFIG_DEBUG_DEVRES is not set ++# CONFIG_SYS_HYPERVISOR is not set ++ ++# ++# Connector - unified userspace <-> kernelspace linker ++# ++# CONFIG_CONNECTOR is not set ++ ++# ++# Memory Technology Devices (MTD) ++# ++CONFIG_MTD=m ++# CONFIG_MTD_DEBUG is not set ++# CONFIG_MTD_CONCAT is not set ++CONFIG_MTD_PARTITIONS=y ++# CONFIG_MTD_REDBOOT_PARTS is not set ++# CONFIG_MTD_AFS_PARTS is not set ++ ++# ++# User Modules And Translation Layers ++# ++CONFIG_MTD_CHAR=m ++CONFIG_MTD_BLKDEVS=m ++CONFIG_MTD_BLOCK=m ++# CONFIG_MTD_BLOCK_RO is not set ++# CONFIG_FTL is not set ++# CONFIG_NFTL is not set ++# CONFIG_INFTL is not set ++# CONFIG_RFD_FTL is not set ++# CONFIG_SSFDC is not set ++ ++# ++# RAM/ROM/Flash chip drivers ++# ++# CONFIG_MTD_CFI is not set ++# CONFIG_MTD_JEDECPROBE is not set ++CONFIG_MTD_MAP_BANK_WIDTH_1=y ++CONFIG_MTD_MAP_BANK_WIDTH_2=y ++CONFIG_MTD_MAP_BANK_WIDTH_4=y ++# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set ++# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set ++# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set ++CONFIG_MTD_CFI_I1=y ++CONFIG_MTD_CFI_I2=y ++# CONFIG_MTD_CFI_I4 is not set ++# CONFIG_MTD_CFI_I8 is not set ++# CONFIG_MTD_RAM is not set ++# CONFIG_MTD_ROM is not set ++# CONFIG_MTD_ABSENT is not set ++# CONFIG_MTD_OBSOLETE_CHIPS is not set ++ ++# ++# Mapping drivers for chip access ++# ++# CONFIG_MTD_COMPLEX_MAPPINGS is not set ++# CONFIG_MTD_SHARP_SL is not set ++# CONFIG_MTD_PLATRAM is not set ++ ++# ++# Self-contained MTD device drivers ++# ++# CONFIG_MTD_PMC551 is not set ++# CONFIG_MTD_SLRAM is not set ++# CONFIG_MTD_PHRAM is not set ++# CONFIG_MTD_MTDRAM is not set ++# CONFIG_MTD_BLOCK2MTD is not set ++ ++# ++# Disk-On-Chip Device Drivers ++# ++# CONFIG_MTD_DOC2000 is not set ++# CONFIG_MTD_DOC2001 is not set ++# CONFIG_MTD_DOC2001PLUS is not set ++ ++# ++# NAND Flash Device Drivers ++# ++CONFIG_MTD_NAND=m ++# CONFIG_MTD_NAND_VERIFY_WRITE is not set ++# CONFIG_MTD_NAND_ECC_SMC is not set ++# CONFIG_MTD_NAND_H1900 is not set ++CONFIG_MTD_NAND_IDS=m ++# CONFIG_MTD_NAND_DISKONCHIP is not set ++# CONFIG_MTD_NAND_SHARPSL is not set ++# CONFIG_MTD_NAND_CAFE is not set ++CONFIG_MTD_NAND_CM_X270=m ++# CONFIG_MTD_NAND_NANDSIM is not set ++ ++# ++# OneNAND Flash Device Drivers ++# ++# CONFIG_MTD_ONENAND is not set ++ ++# ++# Parallel port support ++# ++# CONFIG_PARPORT is not set ++ ++# ++# Plug and Play support ++# ++# CONFIG_PNPACPI is not set ++ ++# ++# Block devices ++# ++# CONFIG_BLK_CPQ_DA is not set ++# CONFIG_BLK_CPQ_CISS_DA is not set ++# CONFIG_BLK_DEV_DAC960 is not set ++# CONFIG_BLK_DEV_UMEM is not set ++# CONFIG_BLK_DEV_COW_COMMON is not set ++CONFIG_BLK_DEV_LOOP=y ++# CONFIG_BLK_DEV_CRYPTOLOOP is not set ++# CONFIG_BLK_DEV_NBD is not set ++# CONFIG_BLK_DEV_SX8 is not set ++# CONFIG_BLK_DEV_UB is not set ++CONFIG_BLK_DEV_RAM=y ++CONFIG_BLK_DEV_RAM_COUNT=16 ++CONFIG_BLK_DEV_RAM_SIZE=12000 ++CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 ++# CONFIG_CDROM_PKTCDVD is not set ++# CONFIG_ATA_OVER_ETH is not set ++ ++# ++# ATA/ATAPI/MFM/RLL support ++# ++CONFIG_IDE=m ++CONFIG_IDE_MAX_HWIFS=4 ++CONFIG_BLK_DEV_IDE=m ++ ++# ++# Please see Documentation/ide.txt for help/info on IDE drives ++# ++# CONFIG_BLK_DEV_IDE_SATA is not set ++CONFIG_BLK_DEV_IDEDISK=m ++# CONFIG_IDEDISK_MULTI_MODE is not set ++CONFIG_BLK_DEV_IDECS=m ++# CONFIG_BLK_DEV_DELKIN is not set ++CONFIG_BLK_DEV_IDECD=m ++# CONFIG_BLK_DEV_IDETAPE is not set ++# CONFIG_BLK_DEV_IDEFLOPPY is not set ++# CONFIG_BLK_DEV_IDESCSI is not set ++# CONFIG_IDE_TASK_IOCTL is not set ++ ++# ++# IDE chipset support/bugfixes ++# ++# CONFIG_IDE_GENERIC is not set ++# CONFIG_BLK_DEV_IDEPCI is not set ++# CONFIG_IDE_ARM is not set ++CONFIG_BLK_DEV_IDE_CM_X270=m ++# CONFIG_BLK_DEV_IDEDMA is not set ++# CONFIG_BLK_DEV_HD is not set ++ ++# ++# SCSI device support ++# ++# CONFIG_RAID_ATTRS is not set ++CONFIG_SCSI=y ++# CONFIG_SCSI_TGT is not set ++# CONFIG_SCSI_NETLINK is not set ++# CONFIG_SCSI_PROC_FS is not set ++ ++# ++# SCSI support type (disk, tape, CD-ROM) ++# ++CONFIG_BLK_DEV_SD=y ++# CONFIG_CHR_DEV_ST is not set ++# CONFIG_CHR_DEV_OSST is not set ++# CONFIG_BLK_DEV_SR is not set ++# CONFIG_CHR_DEV_SG is not set ++# CONFIG_CHR_DEV_SCH is not set ++ ++# ++# Some SCSI devices (e.g. CD jukebox) support multiple LUNs ++# ++# CONFIG_SCSI_MULTI_LUN is not set ++# CONFIG_SCSI_CONSTANTS is not set ++# CONFIG_SCSI_LOGGING is not set ++# CONFIG_SCSI_SCAN_ASYNC is not set ++ ++# ++# SCSI Transports ++# ++# CONFIG_SCSI_SPI_ATTRS is not set ++# CONFIG_SCSI_FC_ATTRS is not set ++# CONFIG_SCSI_ISCSI_ATTRS is not set ++# CONFIG_SCSI_SAS_ATTRS is not set ++# CONFIG_SCSI_SAS_LIBSAS is not set ++ ++# ++# SCSI low-level drivers ++# ++# CONFIG_ISCSI_TCP is not set ++# CONFIG_BLK_DEV_3W_XXXX_RAID is not set ++# CONFIG_SCSI_3W_9XXX is not set ++# CONFIG_SCSI_ACARD is not set ++# CONFIG_SCSI_AACRAID is not set ++# CONFIG_SCSI_AIC7XXX is not set ++# CONFIG_SCSI_AIC7XXX_OLD is not set ++# CONFIG_SCSI_AIC79XX is not set ++# CONFIG_SCSI_AIC94XX is not set ++# CONFIG_SCSI_DPT_I2O is not set ++# CONFIG_SCSI_ARCMSR is not set ++# CONFIG_MEGARAID_NEWGEN is not set ++# CONFIG_MEGARAID_LEGACY is not set ++# CONFIG_MEGARAID_SAS is not set ++# CONFIG_SCSI_HPTIOP is not set ++# CONFIG_SCSI_DMX3191D is not set ++# CONFIG_SCSI_FUTURE_DOMAIN is not set ++# CONFIG_SCSI_IPS is not set ++# CONFIG_SCSI_INITIO is not set ++# CONFIG_SCSI_INIA100 is not set ++# CONFIG_SCSI_STEX is not set ++# CONFIG_SCSI_SYM53C8XX_2 is not set ++# CONFIG_SCSI_QLOGIC_1280 is not set ++# CONFIG_SCSI_QLA_FC is not set ++# CONFIG_SCSI_QLA_ISCSI is not set ++# CONFIG_SCSI_LPFC is not set ++# CONFIG_SCSI_DC395x is not set ++# CONFIG_SCSI_DC390T is not set ++# CONFIG_SCSI_NSP32 is not set ++# CONFIG_SCSI_DEBUG is not set ++# CONFIG_SCSI_SRP is not set ++ ++# ++# PCMCIA SCSI adapter support ++# ++# CONFIG_PCMCIA_AHA152X is not set ++# CONFIG_PCMCIA_FDOMAIN is not set ++# CONFIG_PCMCIA_NINJA_SCSI is not set ++# CONFIG_PCMCIA_QLOGIC is not set ++# CONFIG_PCMCIA_SYM53C500 is not set ++ ++# ++# Serial ATA (prod) and Parallel ATA (experimental) drivers ++# ++# CONFIG_ATA is not set ++ ++# ++# Multi-device support (RAID and LVM) ++# ++# CONFIG_MD is not set ++ ++# ++# Fusion MPT device support ++# ++# CONFIG_FUSION is not set ++# CONFIG_FUSION_SPI is not set ++# CONFIG_FUSION_FC is not set ++# CONFIG_FUSION_SAS is not set ++ ++# ++# IEEE 1394 (FireWire) support ++# ++# CONFIG_IEEE1394 is not set ++ ++# ++# I2O device support ++# ++# CONFIG_I2O is not set ++ ++# ++# Network device support ++# ++CONFIG_NETDEVICES=y ++# CONFIG_DUMMY is not set ++# CONFIG_BONDING is not set ++# CONFIG_EQUALIZER is not set ++# CONFIG_TUN is not set ++ ++# ++# ARCnet devices ++# ++# CONFIG_ARCNET is not set ++ ++# ++# PHY device support ++# ++# CONFIG_PHYLIB is not set ++ ++# ++# Ethernet (10 or 100Mbit) ++# ++CONFIG_NET_ETHERNET=y ++CONFIG_MII=y ++# CONFIG_HAPPYMEAL is not set ++# CONFIG_SUNGEM is not set ++# CONFIG_CASSINI is not set ++# CONFIG_NET_VENDOR_3COM is not set ++# CONFIG_SMC91X is not set ++CONFIG_DM9000=y ++CONFIG_DM9000_NOEPROM=y ++# CONFIG_SMC911X is not set ++ ++# ++# Tulip family network device support ++# ++# CONFIG_NET_TULIP is not set ++# CONFIG_HP100 is not set ++CONFIG_NET_PCI=y ++# CONFIG_PCNET32 is not set ++# CONFIG_AMD8111_ETH is not set ++# CONFIG_ADAPTEC_STARFIRE is not set ++# CONFIG_B44 is not set ++# CONFIG_FORCEDETH is not set ++# CONFIG_DGRS is not set ++# CONFIG_EEPRO100 is not set ++# CONFIG_E100 is not set ++# CONFIG_FEALNX is not set ++# CONFIG_NATSEMI is not set ++# CONFIG_NE2K_PCI is not set ++# CONFIG_8139CP is not set ++CONFIG_8139TOO=m ++# CONFIG_8139TOO_PIO is not set ++# CONFIG_8139TOO_TUNE_TWISTER is not set ++# CONFIG_8139TOO_8129 is not set ++# CONFIG_8139_OLD_RX_RESET is not set ++# CONFIG_SIS900 is not set ++# CONFIG_EPIC100 is not set ++# CONFIG_SUNDANCE is not set ++# CONFIG_TLAN is not set ++# CONFIG_VIA_RHINE is not set ++# CONFIG_SC92031 is not set ++ ++# ++# Ethernet (1000 Mbit) ++# ++# CONFIG_ACENIC is not set ++# CONFIG_DL2K is not set ++# CONFIG_E1000 is not set ++# CONFIG_NS83820 is not set ++# CONFIG_HAMACHI is not set ++# CONFIG_YELLOWFIN is not set ++# CONFIG_R8169 is not set ++# CONFIG_SIS190 is not set ++# CONFIG_SKGE is not set ++# CONFIG_SKY2 is not set ++# CONFIG_SK98LIN is not set ++# CONFIG_VIA_VELOCITY is not set ++# CONFIG_TIGON3 is not set ++# CONFIG_BNX2 is not set ++# CONFIG_QLA3XXX is not set ++# CONFIG_ATL1 is not set ++ ++# ++# Ethernet (10000 Mbit) ++# ++# CONFIG_CHELSIO_T1 is not set ++# CONFIG_CHELSIO_T3 is not set ++# CONFIG_IXGB is not set ++# CONFIG_S2IO is not set ++# CONFIG_MYRI10GE is not set ++# CONFIG_NETXEN_NIC is not set ++ ++# ++# Token Ring devices ++# ++# CONFIG_TR is not set ++ ++# ++# Wireless LAN (non-hamradio) ++# ++CONFIG_NET_RADIO=y ++# CONFIG_NET_WIRELESS_RTNETLINK is not set ++ ++# ++# Obsolete Wireless cards support (pre-802.11) ++# ++# CONFIG_STRIP is not set ++# CONFIG_PCMCIA_WAVELAN is not set ++# CONFIG_PCMCIA_NETWAVE is not set ++ ++# ++# Wireless 802.11 Frequency Hopping cards support ++# ++# CONFIG_PCMCIA_RAYCS is not set ++ ++# ++# Wireless 802.11b ISA/PCI cards support ++# ++# CONFIG_IPW2100 is not set ++# CONFIG_IPW2200 is not set ++# CONFIG_HERMES is not set ++# CONFIG_ATMEL is not set ++ ++# ++# Wireless 802.11b Pcmcia/Cardbus cards support ++# ++# CONFIG_AIRO_CS is not set ++# CONFIG_PCMCIA_WL3501 is not set ++ ++# ++# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support ++# ++# CONFIG_PRISM54 is not set ++# CONFIG_USB_ZD1201 is not set ++# CONFIG_HOSTAP is not set ++CONFIG_NET_WIRELESS=y ++ ++# ++# PCMCIA network device support ++# ++CONFIG_NET_PCMCIA=y ++# CONFIG_PCMCIA_3C589 is not set ++# CONFIG_PCMCIA_3C574 is not set ++# CONFIG_PCMCIA_FMVJ18X is not set ++CONFIG_PCMCIA_PCNET=m ++# CONFIG_PCMCIA_NMCLAN is not set ++# CONFIG_PCMCIA_SMC91C92 is not set ++# CONFIG_PCMCIA_XIRC2PS is not set ++# CONFIG_PCMCIA_AXNET is not set ++ ++# ++# Wan interfaces ++# ++# CONFIG_WAN is not set ++# CONFIG_FDDI is not set ++# CONFIG_HIPPI is not set ++# CONFIG_PPP is not set ++# CONFIG_SLIP is not set ++# CONFIG_NET_FC is not set ++# CONFIG_SHAPER is not set ++# CONFIG_NETCONSOLE is not set ++# CONFIG_NETPOLL is not set ++# CONFIG_NET_POLL_CONTROLLER is not set ++ ++# ++# ISDN subsystem ++# ++# CONFIG_ISDN is not set ++ ++# ++# Input device support ++# ++CONFIG_INPUT=y ++# CONFIG_INPUT_FF_MEMLESS is not set ++ ++# ++# Userland interfaces ++# ++# CONFIG_INPUT_MOUSEDEV is not set ++# CONFIG_INPUT_JOYDEV is not set ++# CONFIG_INPUT_TSDEV is not set ++CONFIG_INPUT_EVDEV=y ++# CONFIG_INPUT_EVBUG is not set ++ ++# ++# Input Device Drivers ++# ++# CONFIG_INPUT_KEYBOARD is not set ++# CONFIG_INPUT_MOUSE is not set ++# CONFIG_INPUT_JOYSTICK is not set ++CONFIG_INPUT_TOUCHSCREEN=y ++# CONFIG_TOUCHSCREEN_GUNZE is not set ++# CONFIG_TOUCHSCREEN_ELO is not set ++# CONFIG_TOUCHSCREEN_MTOUCH is not set ++# CONFIG_TOUCHSCREEN_MK712 is not set ++# CONFIG_TOUCHSCREEN_PENMOUNT is not set ++# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set ++# CONFIG_TOUCHSCREEN_TOUCHWIN is not set ++CONFIG_TOUCHSCREEN_UCB1400=m ++# CONFIG_INPUT_MISC is not set ++ ++# ++# Hardware I/O ports ++# ++# CONFIG_SERIO is not set ++# CONFIG_GAMEPORT is not set ++ ++# ++# Character devices ++# ++CONFIG_VT=y ++CONFIG_VT_CONSOLE=y ++CONFIG_HW_CONSOLE=y ++# CONFIG_VT_HW_CONSOLE_BINDING is not set ++# CONFIG_SERIAL_NONSTANDARD is not set ++ ++# ++# Serial drivers ++# ++# CONFIG_SERIAL_8250 is not set ++ ++# ++# Non-8250 serial port support ++# ++CONFIG_SERIAL_PXA=y ++CONFIG_SERIAL_PXA_CONSOLE=y ++CONFIG_SERIAL_CORE=y ++CONFIG_SERIAL_CORE_CONSOLE=y ++# CONFIG_SERIAL_JSM is not set ++CONFIG_UNIX98_PTYS=y ++CONFIG_LEGACY_PTYS=y ++CONFIG_LEGACY_PTY_COUNT=256 ++ ++# ++# IPMI ++# ++# CONFIG_IPMI_HANDLER is not set ++ ++# ++# Watchdog Cards ++# ++# CONFIG_WATCHDOG is not set ++CONFIG_HW_RANDOM=m ++# CONFIG_NVRAM is not set ++# CONFIG_DTLK is not set ++# CONFIG_R3964 is not set ++# CONFIG_APPLICOM is not set ++# CONFIG_DRM is not set ++ ++# ++# PCMCIA character devices ++# ++# CONFIG_SYNCLINK_CS is not set ++# CONFIG_CARDMAN_4000 is not set ++# CONFIG_CARDMAN_4040 is not set ++# CONFIG_RAW_DRIVER is not set ++ ++# ++# TPM devices ++# ++# CONFIG_TCG_TPM is not set ++ ++# ++# I2C support ++# ++# CONFIG_I2C is not set ++ ++# ++# SPI support ++# ++# CONFIG_SPI is not set ++# CONFIG_SPI_MASTER is not set ++ ++# ++# Dallas's 1-wire bus ++# ++# CONFIG_W1 is not set ++ ++# ++# Hardware Monitoring support ++# ++# CONFIG_HWMON is not set ++# CONFIG_HWMON_VID is not set ++ ++# ++# Misc devices ++# ++# CONFIG_SGI_IOC4 is not set ++# CONFIG_TIFM_CORE is not set ++ ++# ++# Multifunction device drivers ++# ++# CONFIG_MFD_SM501 is not set ++ ++# ++# LED devices ++# ++CONFIG_NEW_LEDS=y ++CONFIG_LEDS_CLASS=y ++ ++# ++# LED drivers ++# ++CONFIG_LEDS_CM_X270=y ++ ++# ++# LED Triggers ++# ++CONFIG_LEDS_TRIGGERS=y ++# CONFIG_LEDS_TRIGGER_TIMER is not set ++# CONFIG_LEDS_TRIGGER_IDE_DISK is not set ++CONFIG_LEDS_TRIGGER_HEARTBEAT=y ++ ++# ++# Multimedia devices ++# ++# CONFIG_VIDEO_DEV is not set ++ ++# ++# Digital Video Broadcasting Devices ++# ++# CONFIG_DVB is not set ++# CONFIG_USB_DABUSB is not set ++ ++# ++# Graphics support ++# ++# CONFIG_BACKLIGHT_LCD_SUPPORT is not set ++CONFIG_FB=y ++# CONFIG_FIRMWARE_EDID is not set ++# CONFIG_FB_DDC is not set ++CONFIG_FB_CFB_FILLRECT=y ++CONFIG_FB_CFB_COPYAREA=y ++CONFIG_FB_CFB_IMAGEBLIT=y ++# CONFIG_FB_SVGALIB is not set ++# CONFIG_FB_MACMODES is not set ++# CONFIG_FB_BACKLIGHT is not set ++# CONFIG_FB_MODE_HELPERS is not set ++# CONFIG_FB_TILEBLITTING is not set ++ ++# ++# Frambuffer hardware drivers ++# ++# CONFIG_FB_CIRRUS is not set ++# CONFIG_FB_PM2 is not set ++# CONFIG_FB_CYBER2000 is not set ++# CONFIG_FB_ASILIANT is not set ++# CONFIG_FB_IMSTT is not set ++# CONFIG_FB_S1D13XXX is not set ++# CONFIG_FB_NVIDIA is not set ++# CONFIG_FB_RIVA is not set ++# CONFIG_FB_MATROX is not set ++# CONFIG_FB_RADEON is not set ++# CONFIG_FB_ATY128 is not set ++# CONFIG_FB_ATY is not set ++# CONFIG_FB_S3 is not set ++# CONFIG_FB_SAVAGE is not set ++# CONFIG_FB_SIS is not set ++# CONFIG_FB_NEOMAGIC is not set ++# CONFIG_FB_KYRO is not set ++# CONFIG_FB_3DFX is not set ++# CONFIG_FB_VOODOO1 is not set ++# CONFIG_FB_TRIDENT is not set ++CONFIG_FB_PXA=y ++# CONFIG_FB_PXA_PARAMETERS is not set ++CONFIG_FB_MBX=m ++# CONFIG_FB_VIRTUAL is not set ++ ++# ++# Console display driver support ++# ++# CONFIG_VGA_CONSOLE is not set ++CONFIG_DUMMY_CONSOLE=y ++CONFIG_FRAMEBUFFER_CONSOLE=y ++# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set ++# CONFIG_FONTS is not set ++CONFIG_FONT_8x8=y ++CONFIG_FONT_8x16=y ++ ++# ++# Logo configuration ++# ++CONFIG_LOGO=y ++CONFIG_LOGO_LINUX_MONO=y ++CONFIG_LOGO_LINUX_VGA16=y ++CONFIG_LOGO_LINUX_CLUT224=y ++ ++# ++# Sound ++# ++CONFIG_SOUND=m ++ ++# ++# Advanced Linux Sound Architecture ++# ++CONFIG_SND=m ++CONFIG_SND_TIMER=m ++CONFIG_SND_PCM=m ++# CONFIG_SND_SEQUENCER is not set ++CONFIG_SND_OSSEMUL=y ++CONFIG_SND_MIXER_OSS=m ++CONFIG_SND_PCM_OSS=m ++CONFIG_SND_PCM_OSS_PLUGINS=y ++# CONFIG_SND_DYNAMIC_MINORS is not set ++CONFIG_SND_SUPPORT_OLD_API=y ++CONFIG_SND_VERBOSE_PROCFS=y ++# CONFIG_SND_VERBOSE_PRINTK is not set ++# CONFIG_SND_DEBUG is not set ++ ++# ++# Generic devices ++# ++CONFIG_SND_AC97_CODEC=m ++# CONFIG_SND_DUMMY is not set ++# CONFIG_SND_MTPAV is not set ++# CONFIG_SND_SERIAL_U16550 is not set ++# CONFIG_SND_MPU401 is not set ++ ++# ++# PCI devices ++# ++# CONFIG_SND_AD1889 is not set ++# CONFIG_SND_ALS300 is not set ++# CONFIG_SND_ALI5451 is not set ++# CONFIG_SND_ATIIXP is not set ++# CONFIG_SND_ATIIXP_MODEM is not set ++# CONFIG_SND_AU8810 is not set ++# CONFIG_SND_AU8820 is not set ++# CONFIG_SND_AU8830 is not set ++# CONFIG_SND_AZT3328 is not set ++# CONFIG_SND_BT87X is not set ++# CONFIG_SND_CA0106 is not set ++# CONFIG_SND_CMIPCI is not set ++# CONFIG_SND_CS4281 is not set ++# CONFIG_SND_CS46XX is not set ++# CONFIG_SND_DARLA20 is not set ++# CONFIG_SND_GINA20 is not set ++# CONFIG_SND_LAYLA20 is not set ++# CONFIG_SND_DARLA24 is not set ++# CONFIG_SND_GINA24 is not set ++# CONFIG_SND_LAYLA24 is not set ++# CONFIG_SND_MONA is not set ++# CONFIG_SND_MIA is not set ++# CONFIG_SND_ECHO3G is not set ++# CONFIG_SND_INDIGO is not set ++# CONFIG_SND_INDIGOIO is not set ++# CONFIG_SND_INDIGODJ is not set ++# CONFIG_SND_EMU10K1 is not set ++# CONFIG_SND_EMU10K1X is not set ++# CONFIG_SND_ENS1370 is not set ++# CONFIG_SND_ENS1371 is not set ++# CONFIG_SND_ES1938 is not set ++# CONFIG_SND_ES1968 is not set ++# CONFIG_SND_FM801 is not set ++# CONFIG_SND_HDA_INTEL is not set ++# CONFIG_SND_HDSP is not set ++# CONFIG_SND_HDSPM is not set ++# CONFIG_SND_ICE1712 is not set ++# CONFIG_SND_ICE1724 is not set ++# CONFIG_SND_INTEL8X0 is not set ++# CONFIG_SND_INTEL8X0M is not set ++# CONFIG_SND_KORG1212 is not set ++# CONFIG_SND_MAESTRO3 is not set ++# CONFIG_SND_MIXART is not set ++# CONFIG_SND_NM256 is not set ++# CONFIG_SND_PCXHR is not set ++# CONFIG_SND_RIPTIDE is not set ++# CONFIG_SND_RME32 is not set ++# CONFIG_SND_RME96 is not set ++# CONFIG_SND_RME9652 is not set ++# CONFIG_SND_SONICVIBES is not set ++# CONFIG_SND_TRIDENT is not set ++# CONFIG_SND_VIA82XX is not set ++# CONFIG_SND_VIA82XX_MODEM is not set ++# CONFIG_SND_VX222 is not set ++# CONFIG_SND_YMFPCI is not set ++# CONFIG_SND_AC97_POWER_SAVE is not set ++ ++# ++# ALSA ARM devices ++# ++CONFIG_SND_PXA2XX_PCM=m ++CONFIG_SND_PXA2XX_AC97=m ++ ++# ++# USB devices ++# ++# CONFIG_SND_USB_AUDIO is not set ++ ++# ++# PCMCIA devices ++# ++# CONFIG_SND_VXPOCKET is not set ++# CONFIG_SND_PDAUDIOCF is not set ++ ++# ++# SoC audio support ++# ++# CONFIG_SND_SOC is not set ++ ++# ++# Open Sound System ++# ++# CONFIG_SOUND_PRIME is not set ++CONFIG_AC97_BUS=m ++ ++# ++# HID Devices ++# ++CONFIG_HID=y ++# CONFIG_HID_DEBUG is not set ++ ++# ++# USB support ++# ++CONFIG_USB_ARCH_HAS_HCD=y ++CONFIG_USB_ARCH_HAS_OHCI=y ++CONFIG_USB_ARCH_HAS_EHCI=y ++CONFIG_USB=y ++# CONFIG_USB_DEBUG is not set ++ ++# ++# Miscellaneous USB options ++# ++CONFIG_USB_DEVICEFS=y ++# CONFIG_USB_DYNAMIC_MINORS is not set ++# CONFIG_USB_SUSPEND is not set ++# CONFIG_USB_OTG is not set ++ ++# ++# USB Host Controller Drivers ++# ++# CONFIG_USB_EHCI_HCD is not set ++# CONFIG_USB_ISP116X_HCD is not set ++CONFIG_USB_OHCI_HCD=y ++# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set ++# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set ++CONFIG_USB_OHCI_LITTLE_ENDIAN=y ++# CONFIG_USB_UHCI_HCD is not set ++# CONFIG_USB_SL811_HCD is not set ++ ++# ++# USB Device Class drivers ++# ++# CONFIG_USB_ACM is not set ++# CONFIG_USB_PRINTER is not set ++ ++# ++# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' ++# ++ ++# ++# may also be needed; see USB_STORAGE Help for more information ++# ++CONFIG_USB_STORAGE=y ++# CONFIG_USB_STORAGE_DEBUG is not set ++# CONFIG_USB_STORAGE_DATAFAB is not set ++# CONFIG_USB_STORAGE_FREECOM is not set ++# CONFIG_USB_STORAGE_DPCM is not set ++# CONFIG_USB_STORAGE_USBAT is not set ++# CONFIG_USB_STORAGE_SDDR09 is not set ++# CONFIG_USB_STORAGE_SDDR55 is not set ++# CONFIG_USB_STORAGE_JUMPSHOT is not set ++# CONFIG_USB_STORAGE_ALAUDA is not set ++# CONFIG_USB_STORAGE_KARMA is not set ++# CONFIG_USB_LIBUSUAL is not set ++ ++# ++# USB Input Devices ++# ++CONFIG_USB_HID=y ++# CONFIG_USB_HIDINPUT_POWERBOOK is not set ++# CONFIG_HID_FF is not set ++# CONFIG_USB_HIDDEV is not set ++# CONFIG_USB_AIPTEK is not set ++# CONFIG_USB_WACOM is not set ++# CONFIG_USB_ACECAD is not set ++# CONFIG_USB_KBTAB is not set ++# CONFIG_USB_POWERMATE is not set ++# CONFIG_USB_TOUCHSCREEN is not set ++# CONFIG_USB_YEALINK is not set ++# CONFIG_USB_XPAD is not set ++# CONFIG_USB_ATI_REMOTE is not set ++# CONFIG_USB_ATI_REMOTE2 is not set ++# CONFIG_USB_KEYSPAN_REMOTE is not set ++# CONFIG_USB_APPLETOUCH is not set ++# CONFIG_USB_GTCO is not set ++ ++# ++# USB Imaging devices ++# ++# CONFIG_USB_MDC800 is not set ++# CONFIG_USB_MICROTEK is not set ++ ++# ++# USB Network Adapters ++# ++# CONFIG_USB_CATC is not set ++# CONFIG_USB_KAWETH is not set ++# CONFIG_USB_PEGASUS is not set ++# CONFIG_USB_RTL8150 is not set ++# CONFIG_USB_USBNET_MII is not set ++# CONFIG_USB_USBNET is not set ++CONFIG_USB_MON=y ++ ++# ++# USB port drivers ++# ++ ++# ++# USB Serial Converter support ++# ++# CONFIG_USB_SERIAL is not set ++ ++# ++# USB Miscellaneous drivers ++# ++# CONFIG_USB_EMI62 is not set ++# CONFIG_USB_EMI26 is not set ++# CONFIG_USB_ADUTUX is not set ++# CONFIG_USB_AUERSWALD is not set ++# CONFIG_USB_RIO500 is not set ++# CONFIG_USB_LEGOTOWER is not set ++# CONFIG_USB_LCD is not set ++# CONFIG_USB_BERRY_CHARGE is not set ++# CONFIG_USB_LED is not set ++# CONFIG_USB_CYPRESS_CY7C63 is not set ++# CONFIG_USB_CYTHERM is not set ++# CONFIG_USB_PHIDGET is not set ++# CONFIG_USB_IDMOUSE is not set ++# CONFIG_USB_FTDI_ELAN is not set ++# CONFIG_USB_APPLEDISPLAY is not set ++# CONFIG_USB_LD is not set ++# CONFIG_USB_TRANCEVIBRATOR is not set ++# CONFIG_USB_IOWARRIOR is not set ++# CONFIG_USB_TEST is not set ++ ++# ++# USB DSL modem support ++# ++ ++# ++# USB Gadget Support ++# ++# CONFIG_USB_GADGET is not set ++ ++# ++# MMC/SD Card support ++# ++CONFIG_MMC=m ++# CONFIG_MMC_DEBUG is not set ++CONFIG_MMC_BLOCK=m ++CONFIG_MMC_PXA=m ++# CONFIG_MMC_SDHCI is not set ++# CONFIG_MMC_TIFM_SD is not set ++ ++# ++# Real Time Clock ++# ++CONFIG_RTC_LIB=y ++CONFIG_RTC_CLASS=y ++CONFIG_RTC_HCTOSYS=y ++CONFIG_RTC_HCTOSYS_DEVICE="rtc0" ++# CONFIG_RTC_DEBUG is not set ++ ++# ++# RTC interfaces ++# ++CONFIG_RTC_INTF_SYSFS=y ++CONFIG_RTC_INTF_PROC=y ++CONFIG_RTC_INTF_DEV=y ++# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set ++ ++# ++# RTC drivers ++# ++# CONFIG_RTC_DRV_CMOS is not set ++# CONFIG_RTC_DRV_DS1553 is not set ++# CONFIG_RTC_DRV_DS1742 is not set ++# CONFIG_RTC_DRV_M48T86 is not set ++CONFIG_RTC_DRV_SA1100=y ++# CONFIG_RTC_DRV_TEST is not set ++CONFIG_RTC_DRV_V3020=y ++ ++# ++# File systems ++# ++CONFIG_EXT2_FS=y ++# CONFIG_EXT2_FS_XATTR is not set ++# CONFIG_EXT2_FS_XIP is not set ++CONFIG_EXT3_FS=y ++CONFIG_EXT3_FS_XATTR=y ++# CONFIG_EXT3_FS_POSIX_ACL is not set ++# CONFIG_EXT3_FS_SECURITY is not set ++# CONFIG_EXT4DEV_FS is not set ++CONFIG_JBD=y ++# CONFIG_JBD_DEBUG is not set ++CONFIG_FS_MBCACHE=y ++# CONFIG_REISERFS_FS is not set ++# CONFIG_JFS_FS is not set ++# CONFIG_FS_POSIX_ACL is not set ++# CONFIG_XFS_FS is not set ++# CONFIG_GFS2_FS is not set ++# CONFIG_OCFS2_FS is not set ++# CONFIG_MINIX_FS is not set ++# CONFIG_ROMFS_FS is not set ++CONFIG_INOTIFY=y ++CONFIG_INOTIFY_USER=y ++# CONFIG_QUOTA is not set ++CONFIG_DNOTIFY=y ++# CONFIG_AUTOFS_FS is not set ++# CONFIG_AUTOFS4_FS is not set ++# CONFIG_FUSE_FS is not set ++ ++# ++# CD-ROM/DVD Filesystems ++# ++# CONFIG_ISO9660_FS is not set ++# CONFIG_UDF_FS is not set ++ ++# ++# DOS/FAT/NT Filesystems ++# ++CONFIG_FAT_FS=y ++CONFIG_MSDOS_FS=y ++CONFIG_VFAT_FS=y ++CONFIG_FAT_DEFAULT_CODEPAGE=437 ++CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" ++# CONFIG_NTFS_FS is not set ++ ++# ++# Pseudo filesystems ++# ++CONFIG_PROC_FS=y ++CONFIG_PROC_SYSCTL=y ++CONFIG_SYSFS=y ++CONFIG_TMPFS=y ++# CONFIG_TMPFS_POSIX_ACL is not set ++# CONFIG_HUGETLB_PAGE is not set ++CONFIG_RAMFS=y ++# CONFIG_CONFIGFS_FS is not set ++ ++# ++# Miscellaneous filesystems ++# ++# CONFIG_ADFS_FS is not set ++# CONFIG_AFFS_FS is not set ++# CONFIG_HFS_FS is not set ++# CONFIG_HFSPLUS_FS is not set ++# CONFIG_BEFS_FS is not set ++# CONFIG_BFS_FS is not set ++# CONFIG_EFS_FS is not set ++# CONFIG_JFFS2_FS is not set ++# CONFIG_CRAMFS is not set ++# CONFIG_VXFS_FS is not set ++# CONFIG_HPFS_FS is not set ++# CONFIG_QNX4FS_FS is not set ++# CONFIG_SYSV_FS is not set ++# CONFIG_UFS_FS is not set ++ ++# ++# Network File Systems ++# ++CONFIG_NFS_FS=y ++CONFIG_NFS_V3=y ++# CONFIG_NFS_V3_ACL is not set ++# CONFIG_NFS_V4 is not set ++# CONFIG_NFS_DIRECTIO is not set ++# CONFIG_NFSD is not set ++CONFIG_ROOT_NFS=y ++CONFIG_LOCKD=y ++CONFIG_LOCKD_V4=y ++CONFIG_NFS_COMMON=y ++CONFIG_SUNRPC=y ++# CONFIG_RPCSEC_GSS_KRB5 is not set ++# CONFIG_RPCSEC_GSS_SPKM3 is not set ++CONFIG_SMB_FS=y ++# CONFIG_SMB_NLS_DEFAULT is not set ++# CONFIG_CIFS is not set ++# CONFIG_NCP_FS is not set ++# CONFIG_CODA_FS is not set ++# CONFIG_AFS_FS is not set ++# CONFIG_9P_FS is not set ++ ++# ++# Partition Types ++# ++# CONFIG_PARTITION_ADVANCED is not set ++CONFIG_MSDOS_PARTITION=y ++ ++# ++# Native Language Support ++# ++CONFIG_NLS=y ++CONFIG_NLS_DEFAULT="iso8859-1" ++CONFIG_NLS_CODEPAGE_437=y ++# CONFIG_NLS_CODEPAGE_737 is not set ++# CONFIG_NLS_CODEPAGE_775 is not set ++# CONFIG_NLS_CODEPAGE_850 is not set ++# CONFIG_NLS_CODEPAGE_852 is not set ++# CONFIG_NLS_CODEPAGE_855 is not set ++# CONFIG_NLS_CODEPAGE_857 is not set ++# CONFIG_NLS_CODEPAGE_860 is not set ++# CONFIG_NLS_CODEPAGE_861 is not set ++# CONFIG_NLS_CODEPAGE_862 is not set ++# CONFIG_NLS_CODEPAGE_863 is not set ++# CONFIG_NLS_CODEPAGE_864 is not set ++# CONFIG_NLS_CODEPAGE_865 is not set ++# CONFIG_NLS_CODEPAGE_866 is not set ++# CONFIG_NLS_CODEPAGE_869 is not set ++# CONFIG_NLS_CODEPAGE_936 is not set ++# CONFIG_NLS_CODEPAGE_950 is not set ++# CONFIG_NLS_CODEPAGE_932 is not set ++# CONFIG_NLS_CODEPAGE_949 is not set ++# CONFIG_NLS_CODEPAGE_874 is not set ++# CONFIG_NLS_ISO8859_8 is not set ++# CONFIG_NLS_CODEPAGE_1250 is not set ++# CONFIG_NLS_CODEPAGE_1251 is not set ++# CONFIG_NLS_ASCII is not set ++CONFIG_NLS_ISO8859_1=y ++# CONFIG_NLS_ISO8859_2 is not set ++# CONFIG_NLS_ISO8859_3 is not set ++# CONFIG_NLS_ISO8859_4 is not set ++# CONFIG_NLS_ISO8859_5 is not set ++# CONFIG_NLS_ISO8859_6 is not set ++# CONFIG_NLS_ISO8859_7 is not set ++# CONFIG_NLS_ISO8859_9 is not set ++# CONFIG_NLS_ISO8859_13 is not set ++# CONFIG_NLS_ISO8859_14 is not set ++# CONFIG_NLS_ISO8859_15 is not set ++# CONFIG_NLS_KOI8_R is not set ++# CONFIG_NLS_KOI8_U is not set ++# CONFIG_NLS_UTF8 is not set ++ ++# ++# Distributed Lock Manager ++# ++# CONFIG_DLM is not set ++ ++# ++# Profiling support ++# ++# CONFIG_PROFILING is not set ++ ++# ++# Kernel hacking ++# ++# CONFIG_PRINTK_TIME is not set ++CONFIG_ENABLE_MUST_CHECK=y ++CONFIG_MAGIC_SYSRQ=y ++# CONFIG_UNUSED_SYMBOLS is not set ++# CONFIG_DEBUG_FS is not set ++# CONFIG_HEADERS_CHECK is not set ++CONFIG_DEBUG_KERNEL=y ++# CONFIG_DEBUG_SHIRQ is not set ++CONFIG_LOG_BUF_SHIFT=17 ++# CONFIG_DETECT_SOFTLOCKUP is not set ++# CONFIG_SCHEDSTATS is not set ++# CONFIG_TIMER_STATS is not set ++# CONFIG_DEBUG_SLAB is not set ++# CONFIG_DEBUG_RT_MUTEXES is not set ++# CONFIG_RT_MUTEX_TESTER is not set ++# CONFIG_DEBUG_SPINLOCK is not set ++# CONFIG_DEBUG_MUTEXES is not set ++# CONFIG_DEBUG_SPINLOCK_SLEEP is not set ++# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set ++# CONFIG_DEBUG_KOBJECT is not set ++# CONFIG_DEBUG_BUGVERBOSE is not set ++CONFIG_DEBUG_INFO=y ++# CONFIG_DEBUG_VM is not set ++# CONFIG_DEBUG_LIST is not set ++CONFIG_FRAME_POINTER=y ++CONFIG_FORCED_INLINING=y ++# CONFIG_RCU_TORTURE_TEST is not set ++# CONFIG_FAULT_INJECTION is not set ++CONFIG_DEBUG_USER=y ++CONFIG_DEBUG_ERRORS=y ++CONFIG_DEBUG_LL=y ++# CONFIG_DEBUG_ICEDCC is not set ++ ++# ++# Security options ++# ++# CONFIG_KEYS is not set ++# CONFIG_SECURITY is not set ++ ++# ++# Cryptographic options ++# ++CONFIG_CRYPTO=y ++CONFIG_CRYPTO_ALGAPI=m ++CONFIG_CRYPTO_BLKCIPHER=m ++CONFIG_CRYPTO_MANAGER=m ++# CONFIG_CRYPTO_HMAC is not set ++# CONFIG_CRYPTO_XCBC is not set ++# CONFIG_CRYPTO_NULL is not set ++# CONFIG_CRYPTO_MD4 is not set ++# CONFIG_CRYPTO_MD5 is not set ++# CONFIG_CRYPTO_SHA1 is not set ++# CONFIG_CRYPTO_SHA256 is not set ++# CONFIG_CRYPTO_SHA512 is not set ++# CONFIG_CRYPTO_WP512 is not set ++# CONFIG_CRYPTO_TGR192 is not set ++# CONFIG_CRYPTO_GF128MUL is not set ++CONFIG_CRYPTO_ECB=m ++CONFIG_CRYPTO_CBC=m ++CONFIG_CRYPTO_PCBC=m ++# CONFIG_CRYPTO_LRW is not set ++# CONFIG_CRYPTO_DES is not set ++# CONFIG_CRYPTO_FCRYPT is not set ++# CONFIG_CRYPTO_BLOWFISH is not set ++# CONFIG_CRYPTO_TWOFISH is not set ++# CONFIG_CRYPTO_SERPENT is not set ++CONFIG_CRYPTO_AES=m ++# CONFIG_CRYPTO_CAST5 is not set ++# CONFIG_CRYPTO_CAST6 is not set ++# CONFIG_CRYPTO_TEA is not set ++CONFIG_CRYPTO_ARC4=m ++# CONFIG_CRYPTO_KHAZAD is not set ++# CONFIG_CRYPTO_ANUBIS is not set ++# CONFIG_CRYPTO_DEFLATE is not set ++# CONFIG_CRYPTO_MICHAEL_MIC is not set ++# CONFIG_CRYPTO_CRC32C is not set ++# CONFIG_CRYPTO_CAMELLIA is not set ++# CONFIG_CRYPTO_TEST is not set ++ ++# ++# Hardware crypto devices ++# ++ ++# ++# Library routines ++# ++CONFIG_BITREVERSE=y ++# CONFIG_CRC_CCITT is not set ++# CONFIG_CRC16 is not set ++CONFIG_CRC32=y ++# CONFIG_LIBCRC32C is not set ++CONFIG_PLIST=y ++CONFIG_HAS_IOMEM=y ++CONFIG_HAS_IOPORT=y +diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig +index 5c0a100..e1cd439 100644 +--- a/arch/arm/mach-pxa/Kconfig ++++ b/arch/arm/mach-pxa/Kconfig +@@ -37,6 +37,11 @@ config MACH_TRIZEPS4 + bool "Keith und Koep Trizeps4 DIMM-Module" + select PXA27x + ++config MACH_ARMCORE ++ bool "CompuLab CM-X270 modules" ++ select PXA27x ++ select IWMMXT ++ + endchoice + + if PXA_SHARPSL +diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile +index 9093eb1..2a110f8 100644 +--- a/arch/arm/mach-pxa/Makefile ++++ b/arch/arm/mach-pxa/Makefile +@@ -18,6 +18,7 @@ obj-$(CONFIG_PXA_SHARP_Cxx00) += spitz.o corgi_ssp.o corgi_lcd.o sharpsl_pm.o sp + obj-$(CONFIG_MACH_AKITA) += akita-ioexp.o + obj-$(CONFIG_MACH_POODLE) += poodle.o corgi_ssp.o + obj-$(CONFIG_MACH_TOSA) += tosa.o ++obj-$(CONFIG_MACH_ARMCORE) += cm-x270.o + + # Support for blinky lights + led-y := leds.o +@@ -25,6 +26,8 @@ led-$(CONFIG_ARCH_LUBBOCK) += leds-lubbock.o + led-$(CONFIG_MACH_MAINSTONE) += leds-mainstone.o + led-$(CONFIG_ARCH_PXA_IDP) += leds-idp.o + led-$(CONFIG_MACH_TRIZEPS4) += leds-trizeps4.o ++# FIXME: use driver/leds instead ++led-$(CONFIG_MACH_ARMCORE) += leds-cm-x270.o + + obj-$(CONFIG_LEDS) += $(led-y) + +@@ -35,3 +38,7 @@ obj-$(CONFIG_PXA_SSP) += ssp.o + ifeq ($(CONFIG_PXA27x),y) + obj-$(CONFIG_PM) += standby.o + endif ++ ++ifeq ($(CONFIG_PCI),y) ++obj-$(CONFIG_MACH_ARMCORE) += cm-x270-pci.o ++endif +diff --git a/arch/arm/mach-pxa/cm-x270.c b/arch/arm/mach-pxa/cm-x270.c +new file mode 100644 +index 0000000..88b080d +--- /dev/null ++++ b/arch/arm/mach-pxa/cm-x270.c +@@ -0,0 +1,821 @@ ++/* ++ * linux/arch/arm/mach-pxa/cm-x270.c ++ * ++ * Copyright (C) 2007 CompuLab, Ltd. ++ * Mike Rapoport <mike@compulab.co.il> ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++ ++#include <linux/pm.h> ++#include <linux/fb.h> ++#include <linux/platform_device.h> ++#include <linux/sysdev.h> ++#include <linux/dm9000.h> ++#include <linux/rtc-v3020.h> ++#include <linux/serial_8250.h> ++#include <video/mbxfb.h> ++ ++#include <asm/types.h> ++#include <asm/setup.h> ++#include <asm/memory.h> ++#include <asm/mach-types.h> ++#include <asm/hardware.h> ++#include <asm/irq.h> ++#include <asm/io.h> ++#include <asm/delay.h> ++ ++#include <asm/mach/arch.h> ++#include <asm/mach/map.h> ++#include <asm/mach/irq.h> ++ ++#include <asm/arch/pxa-regs.h> ++#include <asm/arch/pxafb.h> ++#include <asm/arch/ohci.h> ++#include <asm/arch/mmc.h> ++#include <asm/arch/bitfield.h> ++#include <asm/arch/cm-x270.h> ++ ++#include <asm/hardware/it8152.h> ++ ++#include "generic.h" ++ ++#define RTC_PHYS_BASE (PXA_CS1_PHYS + (5 << 22)) ++#define DM9000_PHYS_BASE (PXA_CS1_PHYS + (6 << 22)) ++ ++static struct resource cmx270_dm9k_resource[] = { ++ [0] = { ++ .start = DM9000_PHYS_BASE, ++ .end = DM9000_PHYS_BASE + 4, ++ .flags = IORESOURCE_MEM, ++ }, ++ [1] = { ++ .start = DM9000_PHYS_BASE + 8, ++ .end = DM9000_PHYS_BASE + 8 + 500, ++ .flags = IORESOURCE_MEM, ++ }, ++ [2] = { ++ .start = CMX270_ETHIRQ, ++ .end = CMX270_ETHIRQ, ++ .flags = IORESOURCE_IRQ, ++ } ++}; ++ ++/* for the moment we limit ourselves to 32bit IO until some ++ * better IO routines can be written and tested ++ */ ++static struct dm9000_plat_data cmx270_dm9k_platdata = { ++ .flags = DM9000_PLATF_32BITONLY, ++}; ++ ++/* Ethernet device */ ++static struct platform_device cmx270_device_dm9k = { ++ .name = "dm9000", ++ .id = 0, ++ .num_resources = ARRAY_SIZE(cmx270_dm9k_resource), ++ .resource = cmx270_dm9k_resource, ++ .dev = { ++ .platform_data = &cmx270_dm9k_platdata, ++ } ++}; ++ ++/* audio device */ ++static struct platform_device cmx270_audio_device = { ++ .name = "pxa2xx-ac97", ++ .id = -1, ++}; ++ ++/* touchscreen controller */ ++static struct platform_device cmx270_ts_device = { ++ .name = "ucb1x00-ts", ++ .id = -1, ++}; ++ ++/* RTC */ ++static struct resource cmx270_v3020_resource[] = { ++ [0] = { ++ .start = RTC_PHYS_BASE, ++ .end = RTC_PHYS_BASE + 4, ++ .flags = IORESOURCE_MEM, ++ }, ++}; ++ ++struct v3020_platform_data cmx270_v3020_pdata = { ++ .leftshift = 16, ++}; ++ ++static struct platform_device cmx270_rtc_device = { ++ .name = "v3020", ++ .num_resources = ARRAY_SIZE(cmx270_v3020_resource), ++ .resource = cmx270_v3020_resource, ++ .id = -1, ++ .dev = { ++ .platform_data = &cmx270_v3020_pdata, ++ } ++}; ++ ++/* ++ * CM-X270 LEDs ++ */ ++static struct platform_device cmx270led_device = { ++ .name = "cm-x270-led", ++ .id = -1, ++}; ++ ++/* 2700G graphics */ ++static u64 fb_dma_mask = ~(u64)0; ++ ++static struct resource cmx270_2700G_resource[] = { ++ /* frame buffer memory including ODFB and External SDRAM */ ++ [0] = { ++ .start = MARATHON_PHYS, ++ .end = MARATHON_PHYS + 0x02000000, ++ .flags = IORESOURCE_MEM, ++ }, ++ /* Marathon registers */ ++ [1] = { ++ .start = MARATHON_PHYS + 0x03fe0000, ++ .end = MARATHON_PHYS + 0x03ffffff, ++ .flags = IORESOURCE_MEM, ++ }, ++}; ++ ++static unsigned long save_lcd_regs[10]; ++ ++static int cmx270_marathon_probe(struct fb_info *fb) ++{ ++ /* save PXA-270 pin settings before enabling 2700G */ ++ save_lcd_regs[0] = GPDR1; ++ save_lcd_regs[1] = GPDR2; ++ save_lcd_regs[2] = GAFR1_U; ++ save_lcd_regs[3] = GAFR2_L; ++ save_lcd_regs[4] = GAFR2_U; ++ ++ /* Disable PXA-270 on-chip controller driving pins */ ++ GPDR1 &= ~(0xfc000000); ++ GPDR2 &= ~(0x00c03fff); ++ GAFR1_U &= ~(0xfff00000); ++ GAFR2_L &= ~(0x0fffffff); ++ GAFR2_U &= ~(0x0000f000); ++ return 0; ++} ++ ++static int cmx270_marathon_remove(struct fb_info *fb) ++{ ++ GPDR1 = save_lcd_regs[0]; ++ GPDR2 = save_lcd_regs[1]; ++ GAFR1_U = save_lcd_regs[2]; ++ GAFR2_L = save_lcd_regs[3]; ++ GAFR2_U = save_lcd_regs[4]; ++ return 0; ++} ++ ++static struct mbxfb_platform_data cmx270_2700G_data = { ++ .xres = { ++ .min = 240, ++ .max = 1200, ++ .defval = 640, ++ }, ++ .yres = { ++ .min = 240, ++ .max = 1200, ++ .defval = 480, ++ }, ++ .bpp = { ++ .min = 16, ++ .max = 32, ++ .defval = 16, ++ }, ++ .memsize = 8*1024*1024, ++ .probe = cmx270_marathon_probe, ++ .remove = cmx270_marathon_remove, ++}; ++ ++static struct platform_device cmx270_2700G = { ++ .name = "mbx-fb", ++ .dev = { ++ .platform_data = &cmx270_2700G_data, ++ .dma_mask = &fb_dma_mask, ++ .coherent_dma_mask = 0xffffffff, ++ }, ++ .num_resources = ARRAY_SIZE(cmx270_2700G_resource), ++ .resource = cmx270_2700G_resource, ++ .id = -1, ++}; ++ ++/* platform devices */ ++static struct platform_device *platform_devices[] __initdata = { ++ &cmx270_device_dm9k, ++ &cmx270_audio_device, ++ &cmx270_rtc_device, ++ &cmx270_2700G, ++ &cmx270led_device, ++}; ++ ++#ifdef CONFIG_PCI ++/* ++ * Install handler for IT8152 IRQ. Yes, yes... we are way down the IRQ ++ * cascade which is not good for IRQ latency, but the hardware has been ++ * designed that way... ++ */ ++static inline void cmx270_irq(int irq, struct pt_regs *regs) ++{ ++ struct irq_desc *desc; ++ desc = irq_desc + irq; ++ desc_handle_irq(irq, desc); ++} ++ ++static void cmx270_irq_demux(unsigned int irq, struct irqdesc *desc, ++ struct pt_regs *regs) ++{ ++ unsigned long pdcnimr, ldcnimr; ++ int pdcnirr, ldcnir; ++ ++ /* clear our parent irq */ ++ GEDR(GPIO_IT8152_IRQ) = GPIO_bit(GPIO_IT8152_IRQ); ++ ++ /* read pending IRQs in the chip registers and clear them */ ++ pdcnirr = IT8152_INTC_PDCNIRR; ++ ldcnir = IT8152_INTC_LDCNIRR; ++ IT8152_INTC_PDCNIRR = ~pdcnirr; ++ IT8152_INTC_LDCNIRR = ~ldcnir; ++ ++ /* mask ITE irqs */ ++ pdcnimr = IT8152_INTC_PDCNIMR; ++ ldcnimr = IT8152_INTC_LDCNIMR; ++ IT8152_INTC_PDCNIMR = 0xffff; ++ IT8152_INTC_LDCNIMR = 0xffff; ++ ++ pdcnirr &= (PCISERR_BIT | H2PTADR_BIT | H2PMAR_BIT | ++ PCI_INTD_BIT | PCI_INTC_BIT | PCI_INTB_BIT | PCI_INTA_BIT | ++ USB_INT_BIT | CDMA_INT_BIT); ++ ++ ldcnir &= ITESER_BIT; ++ ++ IT8152_INTC_PDCNIRR = ~pdcnirr; ++ IT8152_INTC_LDCNIRR = ~ldcnir; ++ ++ /* are there interrupts pending ? */ ++ if( (pdcnirr | ldcnir) ) { ++ if (pdcnirr) { ++ if( pdcnirr & PCISERR_BIT ) ++ cmx270_irq(PCISERR, regs); ++ if( pdcnirr & H2PTADR_BIT ) ++ cmx270_irq(H2PTADR, regs); ++ if( pdcnirr & H2PMAR_BIT ) ++ cmx270_irq(H2PMAR, regs); ++ if( pdcnirr & PCI_INTA_BIT ) ++ cmx270_irq(PCI_INTA, regs); ++ if( pdcnirr & PCI_INTB_BIT ) ++ cmx270_irq(PCI_INTB, regs); ++ if( pdcnirr & PCI_INTC_BIT ) ++ cmx270_irq(PCI_INTC, regs); ++ if( pdcnirr & PCI_INTD_BIT ) ++ cmx270_irq(PCI_INTD, regs); ++ if( pdcnirr & USB_INT_BIT ) ++ cmx270_irq(USB_INT, regs); ++ if( pdcnirr & CDMA_INT_BIT ) ++ cmx270_irq(CDMA_INT, regs); ++ } ++ if(ldcnir) { ++ if( ldcnir & ITESER_BIT ) ++ cmx270_irq(IRQ_ITESER, regs); ++ } ++ } ++ ++ /* re-enable ITE interrupts */ ++ IT8152_INTC_PDCNIMR = pdcnimr; ++ IT8152_INTC_LDCNIMR = ldcnimr; ++} ++#else ++unsigned long it8152_base_address = CMX270_IT8152_VIRT; ++#endif ++ ++/* #define CMX270_FLASH_VIRT (CMX270_IDE104_VIRT + PXA_CS_SIZE - (8<<20)) */ ++/* Map PCI companion and IDE/General Purpose CS statically */ ++static struct map_desc cmx270_io_desc[] __initdata = { ++ [0] = { /* IDE/general purpose space */ ++ .virtual = CMX270_IDE104_VIRT, ++ .pfn = __phys_to_pfn(CMX270_IDE104_PHYS), ++ .length = PXA_CS_SIZE - (8<<20), ++ .type = MT_DEVICE ++ }, ++ [1] = { /* PCI bridge */ ++ .virtual = CMX270_IT8152_VIRT, ++ .pfn = __phys_to_pfn(CMX270_IT8152_PHYS), ++ .length = PXA_CS_SIZE, ++ .type = MT_DEVICE ++ }, ++}; ++ ++/* ++ Display definitions ++ keep these for backwards compatibility, although symbolic names (as ++ e.g. in lpd270.c) looks better ++ */ ++#define MTYPE_STN320x240 0 ++#define MTYPE_TFT640x480 1 ++#define MTYPE_CRT640x480 2 ++#define MTYPE_CRT800x600 3 ++#define MTYPE_TFT320x240 6 ++#define MTYPE_STN640x480 7 ++ ++static struct pxafb_mode_info generic_stn_320x240_mode = { ++ .pixclock = 76923, ++ .bpp = 8, ++ .xres = 320, ++ .yres = 240, ++ .hsync_len = 3, ++ .vsync_len = 2, ++ .left_margin = 3, ++ .upper_margin = 0, ++ .right_margin = 3, ++ .lower_margin = 0, ++ .sync = (FB_SYNC_HOR_HIGH_ACT | ++ FB_SYNC_VERT_HIGH_ACT), ++ .cmap_greyscale = 0, ++}; ++ ++static struct pxafb_mach_info generic_stn_320x240 = { ++ .modes = &generic_stn_320x240_mode, ++ .num_modes = 1, ++ .lccr0 = 0, ++ .lccr3 = (LCCR3_PixClkDiv(0x03) | ++ LCCR3_Acb(0xff) | ++ LCCR3_PCP), ++ .cmap_inverse = 0, ++ .cmap_static = 0, ++}; ++ ++static struct pxafb_mode_info generic_tft_640x480_mode = { ++ .pixclock = 38461, ++ .bpp = 8, ++ .xres = 640, ++ .yres = 480, ++ .hsync_len = 60, ++ .vsync_len = 2, ++ .left_margin = 70, ++ .upper_margin = 10, ++ .right_margin = 70, ++ .lower_margin = 5, ++ .sync = 0, ++ .cmap_greyscale = 0, ++}; ++ ++static struct pxafb_mach_info generic_tft_640x480 = { ++ .modes = &generic_tft_640x480_mode, ++ .num_modes = 1, ++ .lccr0 = (LCCR0_PAS), ++ .lccr3 = (LCCR3_PixClkDiv(0x01) | ++ LCCR3_Acb(0xff) | ++ LCCR3_PCP), ++ .cmap_inverse = 0, ++ .cmap_static = 0, ++}; ++ ++static struct pxafb_mode_info generic_crt_640x480_mode = { ++ .pixclock = 38461, ++ .bpp = 8, ++ .xres = 640, ++ .yres = 480, ++ .hsync_len = 63, ++ .vsync_len = 2, ++ .left_margin = 81, ++ .upper_margin = 33, ++ .right_margin = 16, ++ .lower_margin = 10, ++ .sync = (FB_SYNC_HOR_HIGH_ACT | ++ FB_SYNC_VERT_HIGH_ACT), ++ .cmap_greyscale = 0, ++}; ++ ++static struct pxafb_mach_info generic_crt_640x480 = { ++ .modes = &generic_crt_640x480_mode, ++ .num_modes = 1, ++ .lccr0 = (LCCR0_PAS), ++ .lccr3 = (LCCR3_PixClkDiv(0x01) | ++ LCCR3_Acb(0xff)), ++ .cmap_inverse = 0, ++ .cmap_static = 0, ++}; ++ ++static struct pxafb_mode_info generic_crt_800x600_mode = { ++ .pixclock = 28846, ++ .bpp = 8, ++ .xres = 800, ++ .yres = 600, ++ .hsync_len = 63, ++ .vsync_len = 2, ++ .left_margin = 26, ++ .upper_margin = 21, ++ .right_margin = 26, ++ .lower_margin = 11, ++ .sync = (FB_SYNC_HOR_HIGH_ACT | ++ FB_SYNC_VERT_HIGH_ACT), ++ .cmap_greyscale = 0, ++}; ++ ++static struct pxafb_mach_info generic_crt_800x600 = { ++ .modes = &generic_crt_800x600_mode, ++ .num_modes = 1, ++ .lccr0 = (LCCR0_PAS), ++ .lccr3 = (LCCR3_PixClkDiv(0x02) | ++ LCCR3_Acb(0xff)), ++ .cmap_inverse = 0, ++ .cmap_static = 0, ++}; ++ ++static struct pxafb_mode_info generic_tft_320x240_mode = { ++ .pixclock = 134615, ++ .bpp = 16, ++ .xres = 320, ++ .yres = 240, ++ .hsync_len = 63, ++ .vsync_len = 7, ++ .left_margin = 75, ++ .upper_margin = 0, ++ .right_margin = 15, ++ .lower_margin = 15, ++ .sync = 0, ++ .cmap_greyscale = 0, ++}; ++ ++static struct pxafb_mach_info generic_tft_320x240 = { ++ .modes = &generic_tft_320x240_mode, ++ .num_modes = 1, ++ .lccr0 = (LCCR0_PAS), ++ .lccr3 = (LCCR3_PixClkDiv(0x06) | ++ LCCR3_Acb(0xff) | ++ LCCR3_PCP), ++ .cmap_inverse = 0, ++ .cmap_static = 0, ++}; ++ ++static struct pxafb_mode_info generic_stn_640x480_mode = { ++ .pixclock = 57692, ++ .bpp = 8, ++ .xres = 640, ++ .yres = 480, ++ .hsync_len = 4, ++ .vsync_len = 2, ++ .left_margin = 10, ++ .upper_margin = 5, ++ .right_margin = 10, ++ .lower_margin = 5, ++ .sync = (FB_SYNC_HOR_HIGH_ACT | ++ FB_SYNC_VERT_HIGH_ACT), ++ .cmap_greyscale = 0, ++}; ++ ++static struct pxafb_mach_info generic_stn_640x480 = { ++ .modes = &generic_stn_640x480_mode, ++ .num_modes = 1, ++ .lccr0 = 0, ++ .lccr3 = (LCCR3_PixClkDiv(0x02) | ++ LCCR3_Acb(0xff)), ++ .cmap_inverse = 0, ++ .cmap_static = 0, ++}; ++ ++static struct pxafb_mach_info *cmx270_display = &generic_crt_640x480; ++ ++static int __init cmx270_set_display(char *str) ++{ ++ int disp_type = simple_strtol(str, NULL, 0); ++ switch (disp_type) { ++ case MTYPE_STN320x240: ++ cmx270_display = &generic_stn_320x240; ++ break; ++ case MTYPE_TFT640x480: ++ cmx270_display = &generic_tft_640x480; ++ break; ++ case MTYPE_CRT640x480: ++ cmx270_display = &generic_crt_640x480; ++ break; ++ case MTYPE_CRT800x600: ++ cmx270_display = &generic_crt_800x600; ++ break; ++ case MTYPE_TFT320x240: ++ cmx270_display = &generic_tft_320x240; ++ break; ++ case MTYPE_STN640x480: ++ cmx270_display = &generic_stn_640x480; ++ break; ++ default: /* fallback to CRT 640x480 */ ++ cmx270_display = &generic_crt_640x480; ++ break; ++ } ++ return 1; ++} ++ ++__setup("monitor=", cmx270_set_display); ++ ++/* PXA27x OHCI controller setup */ ++static int cmx270_ohci_init(struct device *dev) ++{ ++ /* Set the Power Control Polarity Low */ ++ UHCHR = (UHCHR | UHCHR_PCPL) & ++ ~(UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSE); ++ ++ return 0; ++} ++ ++static struct pxaohci_platform_data cmx270_ohci_platform_data = { ++ .port_mode = PMM_PERPORT_MODE, ++ .init = cmx270_ohci_init, ++}; ++ ++ ++static int cmx270_mci_init(struct device *dev, irq_handler_t cmx270_detect_int, void *data) ++{ ++ int err; ++ ++ /* ++ * setup GPIO for PXA27x MMC controller ++ */ ++ pxa_gpio_mode(GPIO32_MMCCLK_MD); ++ pxa_gpio_mode(GPIO112_MMCCMD_MD); ++ pxa_gpio_mode(GPIO92_MMCDAT0_MD); ++ pxa_gpio_mode(GPIO109_MMCDAT1_MD); ++ pxa_gpio_mode(GPIO110_MMCDAT2_MD); ++ pxa_gpio_mode(GPIO111_MMCDAT3_MD); ++ ++ /* SB-X270 uses GPIO105 as SD power enable */ ++ pxa_gpio_mode(105 | GPIO_OUT); ++ ++ /* card detect IRQ on GPIO 83 */ ++ pxa_gpio_mode(IRQ_TO_GPIO(CMX270_MMC_IRQ)); ++ set_irq_type(CMX270_MMC_IRQ, IRQT_FALLING); ++ ++ err = request_irq(CMX270_MMC_IRQ, cmx270_detect_int, SA_INTERRUPT, ++ "MMC card detect", data); ++ if (err) { ++ printk(KERN_ERR "cmx270_mci_init: MMC/SD: can't request MMC card detect IRQ\n"); ++ return -1; ++ } ++ ++ return 0; ++} ++ ++static void cmx270_mci_setpower(struct device *dev, unsigned int vdd) ++{ ++ struct pxamci_platform_data* p_d = dev->platform_data; ++ ++ if (( 1 << vdd) & p_d->ocr_mask) { ++ printk(KERN_DEBUG "%s: on\n", __FUNCTION__); ++ GPCR(105) = GPIO_bit(105); ++ } else { ++ GPSR(105) = GPIO_bit(105); ++ printk(KERN_DEBUG "%s: off\n", __FUNCTION__); ++ } ++} ++ ++static void cmx270_mci_exit(struct device *dev, void *data) ++{ ++ free_irq(CMX270_MMC_IRQ, data); ++} ++ ++static struct pxamci_platform_data cmx270_mci_platform_data = { ++ .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, ++ .init = cmx270_mci_init, ++ .setpower = cmx270_mci_setpower, ++ .exit = cmx270_mci_exit, ++}; ++ ++#ifdef CONFIG_PM ++/* extern struct subsystem power_subsys; */ ++static unsigned long sleep_save_ite[10]; ++static unsigned long sleep_save_msc[10]; ++ ++static int cmx270_suspend(struct sys_device *dev, pm_message_t state) ++{ ++#ifdef CONFIG_PCI ++ /* save ITE state */ ++ sleep_save_ite[0] = IT8152_INTC_PDCNIMR; ++ sleep_save_ite[1] = IT8152_INTC_LPCNIMR; ++ sleep_save_ite[2] = IT8152_INTC_LPNIAR; ++ ++ /* Clear ITE IRQ's */ ++ IT8152_INTC_PDCNIRR = 0; ++ IT8152_INTC_LPCNIRR = 0; ++#endif ++ ++ /* save MSC registers */ ++ sleep_save_msc[0] = MSC0; ++ sleep_save_msc[1] = MSC1; ++ sleep_save_msc[2] = MSC2; ++ ++ /* setup power saving mode registers */ ++ PCFR = 0x0; ++ PSLR = 0xff400000; ++ PMCR = 0x00000005; ++ PWER = 0x80000000; ++ PFER = 0x00000000; ++ PRER = 0x00000000; ++ PGSR0 = 0xC0018800; ++ PGSR1 = 0x004F0002; ++ PGSR2 = 0x6021C000; ++ PGSR3 = 0x00020000; ++ ++ return 0; ++} ++ ++static int cmx270_resume(struct sys_device *dev) ++{ ++#ifdef CONFIG_PCI ++ /* restore IT8152 state */ ++ IT8152_INTC_PDCNIMR = sleep_save_ite[0]; ++ IT8152_INTC_LPCNIMR = sleep_save_ite[1]; ++ IT8152_INTC_LPNIAR = sleep_save_ite[2]; ++#endif ++ ++ /* restore MSC registers */ ++ MSC0 = sleep_save_msc[0]; ++ MSC1 = sleep_save_msc[1]; ++ MSC2 = sleep_save_msc[2]; ++ ++ return 0; ++} ++ ++static struct sysdev_class cmx270_pm_sysclass = { ++ set_kset_name("pm"), ++ .resume = cmx270_resume, ++ .suspend = cmx270_suspend, ++}; ++ ++static struct sys_device cmx270_pm_device = { ++ .cls = &cmx270_pm_sysclass, ++}; ++ ++static int __init cmx270_pm_init(void) ++{ ++ int error; ++ error = sysdev_class_register(&cmx270_pm_sysclass); ++ if (error == 0) ++ error = sysdev_register(&cmx270_pm_device); ++ return error; ++} ++#else ++static int __init cmx270_pm_init(void) { return 0; } ++#endif ++ ++static void __init cmx270_init(void) ++{ ++ cmx270_pm_init(); ++ ++ set_pxa_fb_info(cmx270_display); ++ ++ /* register CM-X270 platform devices */ ++ platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); ++ ++ /* set MCI and OHCI platform parameters */ ++ pxa_set_mci_info(&cmx270_mci_platform_data); ++ pxa_set_ohci_info(&cmx270_ohci_platform_data); ++ ++ /* This enables the STUART */ ++ pxa_gpio_mode(GPIO46_STRXD_MD); ++ pxa_gpio_mode(GPIO47_STTXD_MD); ++ ++ /* This enables the BTUART */ ++ pxa_gpio_mode(GPIO42_BTRXD_MD); ++ pxa_gpio_mode(GPIO43_BTTXD_MD); ++ pxa_gpio_mode(GPIO44_BTCTS_MD); ++ pxa_gpio_mode(GPIO45_BTRTS_MD); ++} ++ ++#ifdef CONFIG_PCI ++static void cmx270_mask_irq(unsigned int irq) ++{ ++ switch(irq) { ++ case IT8152_IRQ(0): ++ IT8152_INTC_PDCNIMR |= PCISERR_BIT; ++ break; ++ case IT8152_IRQ(1): ++ IT8152_INTC_PDCNIMR |= H2PTADR_BIT; ++ break; ++ case IT8152_IRQ(2): ++ IT8152_INTC_PDCNIMR |= H2PMAR_BIT; ++ break; ++ case IT8152_IRQ(3): ++ IT8152_INTC_PDCNIMR |= PCI_INTA_BIT; ++ break; ++ case IT8152_IRQ(4): ++ IT8152_INTC_PDCNIMR |= PCI_INTB_BIT; ++ break; ++ case IT8152_IRQ(5): ++ IT8152_INTC_PDCNIMR |= PCI_INTC_BIT; ++ break; ++ case IT8152_IRQ(6): ++ IT8152_INTC_PDCNIMR |= PCI_INTD_BIT; ++ break; ++ case IT8152_IRQ(7): ++ IT8152_INTC_PDCNIMR |= USB_INT_BIT; ++ break; ++ case IT8152_IRQ(9): ++ IT8152_INTC_PDCNIMR |= CDMA_INT_BIT; ++ break; ++ case IT8152_IRQ(10): ++ IT8152_INTC_LDCNIMR |= ITESER_BIT; ++ break; ++ } ++} ++ ++static void cmx270_unmask_irq(unsigned int irq) ++{ ++ switch(irq) { ++ case IT8152_IRQ(0): ++ IT8152_INTC_PDCNIMR &= (~PCISERR_BIT); ++ break; ++ case IT8152_IRQ(1): ++ IT8152_INTC_PDCNIMR &= (~H2PTADR_BIT); ++ break; ++ case IT8152_IRQ(2): ++ IT8152_INTC_PDCNIMR &= (~H2PMAR_BIT); ++ break; ++ case IT8152_IRQ(3): ++ IT8152_INTC_PDCNIMR &= (~PCI_INTA_BIT); ++ break; ++ case IT8152_IRQ(4): ++ IT8152_INTC_PDCNIMR &= (~PCI_INTB_BIT); ++ break; ++ case IT8152_IRQ(5): ++ IT8152_INTC_PDCNIMR &= (~PCI_INTC_BIT); ++ break; ++ case IT8152_IRQ(6): ++ IT8152_INTC_PDCNIMR &= (~PCI_INTD_BIT); ++ break; ++ case IT8152_IRQ(7): ++ IT8152_INTC_PDCNIMR &= (~USB_INT_BIT); ++ break; ++ case IT8152_IRQ(9): ++ IT8152_INTC_PDCNIMR &= (~CDMA_INT_BIT); ++ break; ++ case IT8152_IRQ(10): ++ IT8152_INTC_LDCNIMR &= (~ITESER_BIT); ++ break; ++ } ++} ++ ++static struct irq_chip cmx270_irq_chip = { ++ .ack = cmx270_mask_irq, ++ .mask = cmx270_mask_irq, ++ .unmask = cmx270_unmask_irq, ++}; ++#endif ++ ++static void __init cmx270_init_irq(void) ++{ ++ int irq; ++ ++ pxa_init_irq(); ++ ++ IT8152_INTC_PDCNIMR = 0xffff; ++ ++#ifdef CONFIG_PCI ++ /* Disable and clear IRQ's for ITE8152 */ ++ IT8152_INTC_PDCNIMR = 0xffff; ++ IT8152_INTC_PDCNIRR = 0; ++ IT8152_INTC_LPCNIMR = 0xffff; ++ IT8152_INTC_LPCNIRR = 0; ++ IT8152_INTC_LDCNIMR = 0xffff; ++ IT8152_INTC_LDCNIRR = 0; ++ ++ for(irq = IT8152_IRQ(0); irq <= IT8152_IRQ_MAX; irq++) { ++ set_irq_chip(irq, &cmx270_irq_chip); ++ set_irq_handler(irq, handle_level_irq); ++ set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); ++ } ++ ++ /* INTC signal from IT8152 is connected to GPIO0 */ ++ pxa_gpio_mode(IRQ_GPIO_IT8152_IRQ); ++ set_irq_chained_handler(IRQ_GPIO_IT8152_IRQ, cmx270_irq_demux); ++ set_irq_type(IRQ_GPIO_IT8152_IRQ, IRQT_RISING); ++#endif ++ ++ /* Setup interrupt for dm9000 */ ++ pxa_gpio_mode(IRQ_TO_GPIO(CMX270_ETHIRQ)); ++ set_irq_type(CMX270_ETHIRQ, IRQT_RISING); ++ ++ /* Setup interrupt for 2700G */ ++ pxa_gpio_mode(IRQ_TO_GPIO(CMX270_GFXIRQ)); ++ set_irq_type(CMX270_GFXIRQ, IRQT_FALLING); ++} ++ ++static void __init cmx270_map_io(void) ++{ ++ pxa_map_io(); ++ iotable_init(cmx270_io_desc, ARRAY_SIZE(cmx270_io_desc)); ++} ++ ++ ++MACHINE_START(ARMCORE, "Compulab CM-x270") ++ .boot_params = 0xa0000100, ++ .phys_io = 0x40000000, ++ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, ++ .map_io = cmx270_map_io, ++ .init_irq = cmx270_init_irq, ++ .timer = &pxa_timer, ++ .init_machine = cmx270_init, ++MACHINE_END +diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig +index 87d2046..1023411 100644 +--- a/drivers/leds/Kconfig ++++ b/drivers/leds/Kconfig +@@ -89,6 +89,12 @@ config LEDS_H1940 + help + This option enables support for the LEDs on the h1940. + ++config LEDS_CM_X270 ++ tristate "LED Support for the CM-X270 LEDs" ++ depends on LEDS_CLASS && MACH_ARMCORE ++ help ++ This option enables support for the CM-X270 LEDs. ++ + config LEDS_COBALT + tristate "LED Support for Cobalt Server front LED" + depends on LEDS_CLASS && MIPS_COBALT +diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile +index aa2c18e..808900c 100644 +--- a/drivers/leds/Makefile ++++ b/drivers/leds/Makefile +@@ -16,6 +16,7 @@ obj-$(CONFIG_LEDS_NET48XX) += leds-net48xx.o + obj-$(CONFIG_LEDS_WRAP) += leds-wrap.o + obj-$(CONFIG_LEDS_H1940) += leds-h1940.o + obj-$(CONFIG_LEDS_COBALT) += leds-cobalt.o ++obj-$(CONFIG_LEDS_CM_X270) += leds-cm-x270.o + + # LED Triggers + obj-$(CONFIG_LEDS_TRIGGER_TIMER) += ledtrig-timer.o +diff --git a/drivers/leds/leds-cm-x270.c b/drivers/leds/leds-cm-x270.c +new file mode 100644 +index 0000000..63b7e9e +--- /dev/null ++++ b/drivers/leds/leds-cm-x270.c +@@ -0,0 +1,126 @@ ++/* ++ * drivers/leds/leds-cm-x270.c ++ * ++ * Copyright 2007 CompuLab Ltd. ++ * Author: Mike Rapoport <mike@compulab.co.il> ++ * ++ * Based on leds-corgi.c ++ * Author: Richard Purdie <rpurdie@openedhand.com> ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ */ ++ ++#include <linux/kernel.h> ++#include <linux/init.h> ++#include <linux/platform_device.h> ++#include <linux/leds.h> ++ ++#include <asm/arch/hardware.h> ++#include <asm/arch/pxa-regs.h> ++ ++#define GPIO_RED_LED (93) ++#define GPIO_GREEN_LED (94) ++ ++#define CMX270_RED_ON() GPCR(GPIO_RED_LED) = GPIO_bit(GPIO_RED_LED) ++#define CMX270_RED_OFF() GPSR(GPIO_RED_LED) = GPIO_bit(GPIO_RED_LED) ++#define CMX270_GREEN_ON() GPCR(GPIO_GREEN_LED) = GPIO_bit(GPIO_GREEN_LED) ++#define CMX270_GREEN_OFF() GPSR(GPIO_GREEN_LED) = GPIO_bit(GPIO_GREEN_LED) ++ ++ ++static void cmx270_red_set(struct led_classdev *led_cdev, enum led_brightness value) ++{ ++ if (value) ++ CMX270_RED_ON(); ++ else ++ CMX270_RED_OFF(); ++} ++ ++static void cmx270_green_set(struct led_classdev *led_cdev, enum led_brightness value) ++{ ++ if (value) ++ CMX270_GREEN_ON(); ++ else ++ CMX270_GREEN_OFF(); ++} ++ ++static struct led_classdev cmx270_red_led = { ++ .name = "cm-x270:red", ++ .default_trigger = "nand-disk", ++ .brightness_set = cmx270_red_set, ++}; ++ ++static struct led_classdev cmx270_green_led = { ++ .name = "cm-x270:green", ++ .default_trigger = "heartbeat", ++ .brightness_set = cmx270_green_set, ++}; ++ ++#ifdef CONFIG_PM ++static int cmx270led_suspend(struct platform_device *dev, pm_message_t state) ++{ ++ led_classdev_suspend(&cmx270_red_led); ++ led_classdev_suspend(&cmx270_green_led); ++ return 0; ++} ++ ++static int cmx270led_resume(struct platform_device *dev) ++{ ++ led_classdev_resume(&cmx270_red_led); ++ led_classdev_resume(&cmx270_green_led); ++ return 0; ++} ++#endif ++ ++static int cmx270led_probe(struct platform_device *pdev) ++{ ++ int ret; ++ ++ ret = led_classdev_register(&pdev->dev, &cmx270_red_led); ++ if (ret < 0) ++ return ret; ++ ++ ret = led_classdev_register(&pdev->dev, &cmx270_green_led); ++ if (ret < 0) ++ led_classdev_unregister(&cmx270_red_led); ++ ++ return ret; ++} ++ ++static int cmx270led_remove(struct platform_device *pdev) ++{ ++ led_classdev_unregister(&cmx270_red_led); ++ led_classdev_unregister(&cmx270_green_led); ++ return 0; ++} ++ ++static struct platform_driver cmx270led_driver = { ++ .probe = cmx270led_probe, ++ .remove = cmx270led_remove, ++#ifdef CONFIG_PM ++ .suspend = cmx270led_suspend, ++ .resume = cmx270led_resume, ++#endif ++ .driver = { ++ .name = "cm-x270-led", ++ }, ++}; ++ ++static int __init cmx270led_init(void) ++{ ++ return platform_driver_register(&cmx270led_driver); ++} ++ ++static void __exit cmx270led_exit(void) ++{ ++ platform_driver_unregister(&cmx270led_driver); ++} ++ ++module_init(cmx270led_init); ++module_exit(cmx270led_exit); ++ ++MODULE_AUTHOR("Richard Purdie <rpurdie@openedhand.com>"); ++MODULE_DESCRIPTION("Corgi LED driver"); ++MODULE_LICENSE("GPL"); +diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig +index b49375a..7ee6561 100644 +--- a/drivers/net/Kconfig ++++ b/drivers/net/Kconfig +@@ -875,6 +875,14 @@ config DM9000 + <file:Documentation/networking/net-modules.txt>. The module will be + called dm9000. + ++config DM9000_NOEPROM ++ bool "DM9000 without EEPROM attached" ++ depends on DM9000 ++ ---help--- ++ Select this option if you have DM9000 chipset without EEPROM ++ containing the MAC address. In this case MAC address should ++ be set either by the bootloader or using ifconfig ++ + config SMC911X + tristate "SMSC LAN911[5678] support" + select CRC32 +diff --git a/drivers/net/dm9000.c b/drivers/net/dm9000.c +index 264fa0e..4e2954b 100644 +--- a/drivers/net/dm9000.c ++++ b/drivers/net/dm9000.c +@@ -562,6 +562,7 @@ dm9000_probe(struct platform_device *pdev) + db->mii.mdio_read = dm9000_phy_read; + db->mii.mdio_write = dm9000_phy_write; + ++#ifndef CONFIG_DM9000_NOEPROM + /* Read SROM content */ + for (i = 0; i < 64; i++) + ((u16 *) db->srom)[i] = read_srom_word(db, i); +@@ -569,6 +570,11 @@ dm9000_probe(struct platform_device *pdev) + /* Set Node Address */ + for (i = 0; i < 6; i++) + ndev->dev_addr[i] = db->srom[i]; ++#else ++ /* The Node Address was set by bootloader */ ++ for (i=0; i<6; i++) ++ ndev->dev_addr[i] = ior(db, 0x10+i); ++#endif + + if (!is_valid_ether_addr(ndev->dev_addr)) { + /* try reading from mac */ +diff --git a/include/asm-arm/arch-pxa/cm-x270.h b/include/asm-arm/arch-pxa/cm-x270.h +new file mode 100644 +index 0000000..24613a5 +--- /dev/null ++++ b/include/asm-arm/arch-pxa/cm-x270.h +@@ -0,0 +1,71 @@ ++/* ++ * linux/include/asm/arch-pxa/armcore.h ++ * ++ * Compulab Ltd., 2003 ++ * ++ * ARMCore registers ++ */ ++ ++ ++#define CMX270_CS1_PHYS (PXA_CS1_PHYS) ++#define MARATHON_PHYS (PXA_CS2_PHYS) ++#define CMX270_IDE104_PHYS (PXA_CS3_PHYS) ++#define CMX270_IT8152_PHYS (PXA_CS4_PHYS) ++ ++#define PXA_CS_SIZE (64*1024*1024) ++ ++/* Virtual map */ ++ ++#define CMX270_VIRT_BASE (0xe8000000) ++ ++#define CMX270_IT8152_VIRT (CMX270_VIRT_BASE) ++#define CMX270_IDE104_VIRT (CMX270_IT8152_VIRT + PXA_CS_SIZE) ++ ++ ++/* GPIO related definitions */ ++#define GPIO_IT8152_IRQ (22) ++#define GPIO_RED_LED (93) ++#define GPIO_GREEN_LED (94) ++ ++ ++#define IRQ_GPIO_IT8152_IRQ IRQ_GPIO(GPIO_IT8152_IRQ) ++#define PME_IRQ IRQ_GPIO(0) ++#define CMX270_IDE_IRQ IRQ_GPIO(100) ++#define CMX270_GPIRQ1 IRQ_GPIO(101) ++#define CMX270_TOUCHIRQ IRQ_GPIO(96) ++#define CMX270_ETHIRQ IRQ_GPIO(10) ++#define CMX270_GFXIRQ IRQ_GPIO(95) ++#define CMX270_NANDIRQ IRQ_GPIO(89) ++#define CMX270_MMC_IRQ IRQ_GPIO(83) ++ ++/* LED macros */ ++#define CMX270_RED_ON() GPCR(GPIO_RED_LED) = GPIO_bit(GPIO_RED_LED) ++#define CMX270_RED_OFF() GPSR(GPIO_RED_LED) = GPIO_bit(GPIO_RED_LED) ++#define CMX270_GREEN_ON() GPCR(GPIO_GREEN_LED) = GPIO_bit(GPIO_GREEN_LED) ++#define CMX270_GREEN_OFF() GPSR(GPIO_GREEN_LED) = GPIO_bit(GPIO_GREEN_LED) ++ ++/* PCMCIA related definitions */ ++#define PCC_DETECT(x) (GPLR(84 - (x)) & GPIO_bit(84 - (x))) ++#define PCC_READY(x) (GPLR(82 - (x)) & GPIO_bit(81 - (x))) ++ ++#define PCMCIA_S0_CD_VALID IRQ_GPIO(84) ++#define PCMCIA_S0_CD_VALID_EDGE GPIO_BOTH_EDGES ++ ++#define PCMCIA_S1_CD_VALID IRQ_GPIO(83) ++#define PCMCIA_S1_CD_VALID_EDGE GPIO_BOTH_EDGES ++ ++#define PCMCIA_S0_RDYINT IRQ_GPIO(82) ++#define PCMCIA_S1_RDYINT IRQ_GPIO(81) ++ ++#define PCMCIA_RESET_GPIO 53 ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ +diff --git a/include/asm-arm/arch-pxa/hardware.h b/include/asm-arm/arch-pxa/hardware.h +index e2bdc2f..989303a 100644 +--- a/include/asm-arm/arch-pxa/hardware.h ++++ b/include/asm-arm/arch-pxa/hardware.h +@@ -90,4 +90,15 @@ extern unsigned int get_lcdclk_frequency_10khz(void); + + #endif + ++#if defined(CONFIG_MACH_ARMCORE) && defined(CONFIG_PCI) ++#define HAVE_ARCH_PCI_SET_DMA_MASK ++#ifndef __ASSEMBLY__ ++extern unsigned long armcore_pcibios_min_io; ++extern unsigned long armcore_pcibios_min_mem; ++#endif ++#define PCIBIOS_MIN_IO (armcore_pcibios_min_io) ++#define PCIBIOS_MIN_MEM (armcore_pcibios_min_mem) ++#define pcibios_assign_all_busses() 1 ++#endif ++ + #endif /* _ASM_ARCH_HARDWARE_H */ +diff --git a/include/asm-arm/arch-pxa/irqs.h b/include/asm-arm/arch-pxa/irqs.h +index 67ed436..f9c075f 100644 +--- a/include/asm-arm/arch-pxa/irqs.h ++++ b/include/asm-arm/arch-pxa/irqs.h +@@ -222,3 +222,23 @@ + #define IRQ_LOCOMO_GPIO_BASE (IRQ_BOARD_START + 1) + #define IRQ_LOCOMO_LT_BASE (IRQ_BOARD_START + 2) + #define IRQ_LOCOMO_SPI_BASE (IRQ_BOARD_START + 3) ++ ++/* ITE8152 irqs on CM-x2xx */ ++#ifdef CONFIG_MACH_ARMCORE ++#define IT8152_IRQ(x) (IRQ_BOARD_START + (x)) ++#define PCISERR IT8152_IRQ(0) ++#define H2PTADR IT8152_IRQ(1) ++#define H2PMAR IT8152_IRQ(2) ++#define PCI_INTA IT8152_IRQ(3) ++#define PCI_INTB IT8152_IRQ(4) ++#define PCI_INTC IT8152_IRQ(5) ++#define PCI_INTD IT8152_IRQ(6) ++#define USB_INT IT8152_IRQ(7) ++#define AUDIO_INT IT8152_IRQ(8) ++#define CDMA_INT IT8152_IRQ(9) ++#define IRQ_ITESER IT8152_IRQ(10) ++#define IT8152_IRQ_MAX IT8152_IRQ(10) ++ ++#undef NR_IRQS ++#define NR_IRQS IT8152_IRQ_MAX+1 ++#endif +diff --git a/include/asm-arm/memory.h b/include/asm-arm/memory.h +index d9bfb39..83db3cb 100644 +--- a/include/asm-arm/memory.h ++++ b/include/asm-arm/memory.h +@@ -141,6 +141,16 @@ + * allocations. This must be the smallest DMA mask in the system, + * so a successful GFP_DMA allocation will always satisfy this. + */ ++ ++#ifdef CONFIG_PCI_HOST_ITE8152 ++void it8152_adjust_zones(int node, unsigned long *size, unsigned long *holes); ++ ++#define arch_adjust_zones(node, size, holes) \ ++ it8152_adjust_zones(node, size, holes) ++ ++#define ISA_DMA_THRESHOLD (PHYS_OFFSET + SZ_64M - 1) ++#endif ++ + #ifndef ISA_DMA_THRESHOLD + #define ISA_DMA_THRESHOLD (0xffffffffULL) + #endif +-- +1.5.1.6 + diff --git a/packages/linux/linux-2.6.22/cm-x270/0002-cm-x270-match-type.patch b/packages/linux/linux-2.6.22/cm-x270/0002-cm-x270-match-type.patch new file mode 100644 index 0000000000..68da30191c --- /dev/null +++ b/packages/linux/linux-2.6.22/cm-x270/0002-cm-x270-match-type.patch @@ -0,0 +1,25 @@ +From e566813cedb9f91724597df45c11075023a7b589 Mon Sep 17 00:00:00 2001 +From: Cliff Brake <cbrake@happy.dev.bec-systems.com> +Date: Fri, 20 Jul 2007 18:58:27 -0400 +Subject: [PATCH] cm-x270-match-type + +--- + arch/arm/boot/compressed/head-xscale.S | 5 +++++ + 1 files changed, 5 insertions(+), 0 deletions(-) + +diff --git a/arch/arm/boot/compressed/head-xscale.S b/arch/arm/boot/compressed/head-xscale.S +index 73c5d9e..dc89459 100644 +--- a/arch/arm/boot/compressed/head-xscale.S ++++ b/arch/arm/boot/compressed/head-xscale.S +@@ -53,3 +53,8 @@ __XScale_start: + str r1, [r0, #0x18] + #endif + ++#if defined(CONFIG_MACH_ARMCORE) ++ mov r7, #(MACH_TYPE_ARMCORE & 0xFF00) ++ add r7, r7, #(MACH_TYPE_ARMCORE & 0xFF) ++#endif ++ +-- +1.5.1.6 + diff --git a/packages/linux/linux-2.6.22/cm-x270/0003-cm-x270-ide.patch b/packages/linux/linux-2.6.22/cm-x270/0003-cm-x270-ide.patch new file mode 100644 index 0000000000..0ff115efc8 --- /dev/null +++ b/packages/linux/linux-2.6.22/cm-x270/0003-cm-x270-ide.patch @@ -0,0 +1,186 @@ +From f260d5fa4c99cd7df949e6408af59807f8ccf224 Mon Sep 17 00:00:00 2001 +From: Cliff Brake <cbrake@happy.dev.bec-systems.com> +Date: Fri, 20 Jul 2007 18:59:39 -0400 +Subject: [PATCH] cm-x270-ide + +--- + drivers/ide/Kconfig | 8 +++ + drivers/ide/arm/Makefile | 1 + + drivers/ide/arm/cm-x270-ide.c | 135 +++++++++++++++++++++++++++++++++++++++++ + 3 files changed, 144 insertions(+), 0 deletions(-) + create mode 100644 drivers/ide/arm/cm-x270-ide.c + +diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig +index b1a9b81..7de4155 100644 +--- a/drivers/ide/Kconfig ++++ b/drivers/ide/Kconfig +@@ -864,6 +864,14 @@ config BLK_DEV_IDE_BAST + Say Y here if you want to support the onboard IDE channels on the + Simtec BAST or the Thorcom VR1000 + ++config BLK_DEV_IDE_CM_X270 ++ tristate "CompuLab CM-X270 IDE support" ++ depends on ARM && (MACH_ARMCORE) ++ help ++ Say Y here if you want to support the onboard IDE channels on the ++ CompuLab CM-X270 module ++ ++ + config BLK_DEV_GAYLE + bool "Amiga Gayle IDE interface support" + depends on AMIGA +diff --git a/drivers/ide/arm/Makefile b/drivers/ide/arm/Makefile +index 6a78f07..e5cadb7 100644 +--- a/drivers/ide/arm/Makefile ++++ b/drivers/ide/arm/Makefile +@@ -2,5 +2,6 @@ + obj-$(CONFIG_BLK_DEV_IDE_ICSIDE) += icside.o + obj-$(CONFIG_BLK_DEV_IDE_RAPIDE) += rapide.o + obj-$(CONFIG_BLK_DEV_IDE_BAST) += bast-ide.o ++obj-$(CONFIG_BLK_DEV_IDE_CM_X270) += cm-x270-ide.o + + EXTRA_CFLAGS := -Idrivers/ide +diff --git a/drivers/ide/arm/cm-x270-ide.c b/drivers/ide/arm/cm-x270-ide.c +new file mode 100644 +index 0000000..a8b15aa +--- /dev/null ++++ b/drivers/ide/arm/cm-x270-ide.c +@@ -0,0 +1,135 @@ ++/* linux/drivers/ide/arm/cm-x270-ide.c ++ * ++ * Copyright (c) 2006 CompuLab, Ltd ++ * Mike Rapoport <mike@compulab.co.il> ++ * ++ * Based on linux/drivers/ide/arm/bast-ide.c ++ * Copyright (c) 2003-2004 Simtec Electronics ++ * Ben Dooks <ben@simtec.co.uk> ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ */ ++ ++#include <linux/module.h> ++#include <linux/errno.h> ++#include <linux/ide.h> ++#include <linux/init.h> ++#include <linux/irq.h> ++ ++#include <asm/mach-types.h> ++ ++#include <asm/io.h> ++#include <asm/arch/pxa-regs.h> ++#include <asm/arch/cm-x270.h> ++ ++#define CMX270_SB270_IDECS0_VIRT (CMX270_IDE104_VIRT + (1<<24) + (1<<25)) ++#define CMX270_SB270_IDECS1_VIRT (CMX270_IDE104_VIRT + (1<<25)) ++#define CMX270_ATX_IDECS0_VIRT (CMX270_IDE104_VIRT + (1<<25)) ++#define CMX270_ATX_IDECS1_VIRT (CMX270_IDE104_VIRT + (1<<25) + (1<<22)) ++ ++/* list of registered interfaces */ ++static ide_hwif_t *ifs[1]; ++ ++static int __init ++cmx270_ide_register(unsigned int base, unsigned int aux, int irq, ++ ide_hwif_t **hwif) ++{ ++ hw_regs_t hw; ++ ++ memset(&hw, 0, sizeof(hw)); ++ ++ if(!base || !aux) return -EINVAL; ++ ++ printk(KERN_DEBUG "%s: base = %08x, aux = %08x\n", __FUNCTION__, ++ base, aux); ++ ++ /* Different mappings for local bus IDE and PCMCIA IDE */ ++ if(base == CMX270_SB270_IDECS0_VIRT) { ++ hw.io_ports[IDE_DATA_OFFSET] = base + 0; ++ hw.io_ports[IDE_ERROR_OFFSET] = base + (0x1<<3); ++ hw.io_ports[IDE_NSECTOR_OFFSET]= base + (0x2<<3); ++ hw.io_ports[IDE_SECTOR_OFFSET]= base + (0x3<<3); ++ hw.io_ports[IDE_LCYL_OFFSET]= base + (0x4<<3); ++ hw.io_ports[IDE_HCYL_OFFSET]= base + (0x5<<3); ++ hw.io_ports[IDE_SELECT_OFFSET]= base + (0x6<<3); ++ hw.io_ports[IDE_STATUS_OFFSET]= base + (0x7<<3); ++ hw.io_ports[IDE_CONTROL_OFFSET] = aux+(0x6<<3); ++ } ++ else if (base == CMX270_ATX_IDECS0_VIRT) { /* atx base */ ++ hw.io_ports[IDE_DATA_OFFSET] = base + 0; ++ hw.io_ports[IDE_ERROR_OFFSET] = base + 8; ++ hw.io_ports[IDE_NSECTOR_OFFSET]= base + 2; ++ hw.io_ports[IDE_SECTOR_OFFSET]= base + 10; ++ hw.io_ports[IDE_LCYL_OFFSET]= base + 4; ++ hw.io_ports[IDE_HCYL_OFFSET]= base + 12; ++ hw.io_ports[IDE_SELECT_OFFSET]= base + 6; //6; ++ hw.io_ports[IDE_STATUS_OFFSET]= base + 14; ++ hw.io_ports[IDE_CONTROL_OFFSET] = (aux+0x6); ++ } else { ++ printk(KERN_DEBUG "%s: registering wrong IDE i/f\n", __FUNCTION__); ++ hw.io_ports[IDE_DATA_OFFSET] = base + 8; ++ hw.io_ports[IDE_ERROR_OFFSET] = base + 13; ++ hw.io_ports[IDE_NSECTOR_OFFSET] = base + 2; ++ hw.io_ports[IDE_SECTOR_OFFSET] = base + 3; ++ hw.io_ports[IDE_LCYL_OFFSET] = base + 4; ++ hw.io_ports[IDE_HCYL_OFFSET] = base + 5; ++ hw.io_ports[IDE_SELECT_OFFSET] = base + 6; ++ hw.io_ports[IDE_STATUS_OFFSET] = base + 7; ++ hw.io_ports[IDE_CONTROL_OFFSET] = aux; ++ } ++ ++ hw.irq = irq; ++ ++ return ide_register_hw(&hw, hwif); ++} ++ ++static int __init cmx270_ide_init(void) ++{ ++ int retval = 0; ++ ++ if (!(machine_is_armcore())) ++ goto out; ++ ++ printk("CM-X270: initializing IDE interface\n"); ++ ++ MSC1 = 0x7ffc7ff4; ++ ++ /* Interrupts on rising edge: lines are inverted before they get to ++ the PXA */ ++ pxa_gpio_mode(IRQ_TO_GPIO(CMX270_IDE_IRQ)); ++ ++ /* try SB-X270 */ ++ set_irq_type(CMX270_IDE_IRQ, IRQ_TYPE_EDGE_RISING); ++ retval = cmx270_ide_register(CMX270_SB270_IDECS0_VIRT, ++ CMX270_SB270_IDECS1_VIRT, ++ CMX270_IDE_IRQ, &ifs[0]); ++ if (retval >= 0) { ++ printk(KERN_DEBUG "%s: found IDE interface on SB-X270\n", ++ __FUNCTION__); ++ goto out; ++ } ++ ++ /* SB-X270 detection failed, try ATX */ ++ set_irq_type(CMX270_IDE_IRQ, IRQ_TYPE_EDGE_FALLING); ++ retval = cmx270_ide_register(CMX270_ATX_IDECS0_VIRT, ++ CMX270_ATX_IDECS1_VIRT, ++ CMX270_IDE_IRQ, &ifs[0]); ++ ++ if ( retval >= 0 ) { ++ printk(KERN_DEBUG "%s: found IDE interface on ATX\n", ++ __FUNCTION__); ++ goto out; ++ } ++ ++ out: ++ return retval; ++} ++ ++module_init(cmx270_ide_init); ++ ++MODULE_AUTHOR("CompuLab"); ++MODULE_LICENSE("GPL"); ++MODULE_DESCRIPTION("CompuLab CM-X270 IDE driver"); +-- +1.5.1.6 + diff --git a/packages/linux/linux-2.6.22/cm-x270/0004-cm-x270-it8152.patch b/packages/linux/linux-2.6.22/cm-x270/0004-cm-x270-it8152.patch new file mode 100644 index 0000000000..274eaf24d8 --- /dev/null +++ b/packages/linux/linux-2.6.22/cm-x270/0004-cm-x270-it8152.patch @@ -0,0 +1,496 @@ +From 1306abec905df1ff5cf2b1d91ac0d94d18d96c5b Mon Sep 17 00:00:00 2001 +From: Cliff Brake <cbrake@happy.dev.bec-systems.com> +Date: Fri, 20 Jul 2007 19:00:07 -0400 +Subject: [PATCH] cm-x270-it8152 + +--- + arch/arm/common/Makefile | 1 + + arch/arm/common/it8152.c | 272 +++++++++++++++++++++++++++++++++++++ + arch/arm/kernel/bios32.c | 28 ++++- + include/asm-arm/hardware/it8152.h | 104 ++++++++++++++ + include/asm-arm/pci.h | 7 + + include/linux/pci_ids.h | 1 + + 6 files changed, 410 insertions(+), 3 deletions(-) + create mode 100644 arch/arm/common/it8152.c + create mode 100644 include/asm-arm/hardware/it8152.h + +diff --git a/arch/arm/common/Makefile b/arch/arm/common/Makefile +index e1289a2..3d0b9fa 100644 +--- a/arch/arm/common/Makefile ++++ b/arch/arm/common/Makefile +@@ -17,3 +17,4 @@ obj-$(CONFIG_SHARPSL_PM) += sharpsl_pm.o + obj-$(CONFIG_SHARP_SCOOP) += scoop.o + obj-$(CONFIG_ARCH_IXP2000) += uengine.o + obj-$(CONFIG_ARCH_IXP23XX) += uengine.o ++obj-$(CONFIG_PCI_HOST_ITE8152) += it8152.o +diff --git a/arch/arm/common/it8152.c b/arch/arm/common/it8152.c +new file mode 100644 +index 0000000..8563610 +--- /dev/null ++++ b/arch/arm/common/it8152.c +@@ -0,0 +1,272 @@ ++/* ++ * arch/arm/common/it8152.c: PCI functions for IT8152 ++ * ++ * Compulab Ltd, 2002-2006 ++ * ++ * The DMA bouncing is taken from arch/arm/mach-ixp4xx/common-pci.c ++ * (see this file for respective copyrights) ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++ ++#include <linux/sched.h> ++#include <linux/kernel.h> ++#include <linux/pci.h> ++#include <linux/ptrace.h> ++#include <linux/interrupt.h> ++#include <linux/mm.h> ++#include <linux/slab.h> ++#include <linux/init.h> ++#include <linux/ioport.h> ++#include <asm/mach/map.h> ++ ++ ++#include <asm/io.h> ++#include <asm/irq.h> ++#include <asm/system.h> ++#include <asm/mach/pci.h> ++#include <asm/hardware/it8152.h> ++ ++#define MAX_SLOTS 21 ++ ++static unsigned long ++it8152_pci_dev_base_address(struct pci_bus *bus, unsigned int devfn) ++{ ++ unsigned long addr = 0; ++ ++ if (bus->number == 0) { ++ if (devfn < PCI_DEVFN(MAX_SLOTS, 0)) ++ addr = (devfn << 8); ++ } else ++ addr = (bus->number << 16) | (devfn << 8); ++ ++ return addr; ++} ++ ++static int ++it8152_pci_read_config(struct pci_bus *bus, unsigned int devfn, int where, ++ int size, u32 *value) ++{ ++ unsigned long addr = it8152_pci_dev_base_address(bus, devfn); ++ u32 v; ++ int shift; ++ ++#ifdef CONFIG_MACH_ARMCORE ++ if(devfn!=0) IT8152_GPIO_GPLR=0x00; ++#endif ++ shift = (where & 3); ++ ++ IT8152_PCI_CFG_ADDR = (addr + where); ++ v = (IT8152_PCI_CFG_DATA >> (8 * (shift))); ++ ++ *value = v; ++ ++#ifdef CONFIG_MACH_ARMCORE ++ if(devfn!=0) IT8152_GPIO_GPLR=0x20; ++#endif ++ ++ return PCIBIOS_SUCCESSFUL; ++} ++ ++ ++static int ++it8152_pci_write_config(struct pci_bus *bus, unsigned int devfn, int where, ++ int size, u32 value) ++{ ++ unsigned long addr = it8152_pci_dev_base_address(bus, devfn); ++ u32 v, vtemp, mask=0; ++ int shift; ++ ++#ifdef CONFIG_MACH_ARMCORE ++ if(devfn!=0) IT8152_GPIO_GPLR=0x00; ++#endif ++ ++ if(size==1) mask=0xff; ++ if(size==2) mask=0xffff; ++ ++ shift = (where & 3); ++ ++ IT8152_PCI_CFG_ADDR = addr + where; ++ vtemp = IT8152_PCI_CFG_DATA; ++ ++ if(mask) vtemp &= ~(mask << (8 * shift)); ++ else vtemp = 0; ++ ++ v = (value << (8 * shift)); ++ IT8152_PCI_CFG_ADDR = addr + where; ++ IT8152_PCI_CFG_DATA = (v | vtemp); ++ ++#ifdef CONFIG_MACH_ARMCORE ++ if(devfn!=0) IT8152_GPIO_GPLR=0x20; ++#endif ++ ++ return PCIBIOS_SUCCESSFUL; ++} ++ ++static struct pci_ops it8152_ops = { ++ .read = it8152_pci_read_config, ++ .write = it8152_pci_write_config, ++}; ++ ++static struct resource it8152_io = { ++ .name = "IT8152 PCI I/O region", ++ .flags = IORESOURCE_IO, ++}; ++ ++static struct resource it8152_mem1 = { ++ .name = "First IT8152 PCI memory region", ++ .start = 0x10000000, ++ .end = 0x13e00000, ++ .flags = IORESOURCE_MEM, ++}; ++ ++/* ++ * The following functions are needed for DMA bouncing. ++ * ITE8152 chip can addrees up to 64MByte, so all the devices ++ * connected to ITE8152 (PCI and USB) should have limited DMA window ++ */ ++ ++/* ++ * Setup DMA mask to 64MB on devices connected to ITE8152. Ignore all ++ * other devices. ++ */ ++static int it8152_pci_platform_notify(struct device *dev) ++{ ++ if ( dev->bus == &pci_bus_type ) { ++ if ( dev->dma_mask ) ++ *dev->dma_mask = (SZ_64M - 1) | PHYS_OFFSET; ++ dev->coherent_dma_mask = (SZ_64M - 1) | PHYS_OFFSET; ++ dmabounce_register_dev(dev, 2048, 4096); ++ } ++ return 0; ++} ++ ++static int it8152_pci_platform_notify_remove(struct device *dev) ++{ ++ if ( dev->bus == &pci_bus_type ) { ++ dmabounce_unregister_dev(dev); ++ } ++ return 0; ++} ++ ++int dma_needs_bounce(struct device *dev, dma_addr_t dma_addr, size_t size) ++{ ++ dev_dbg(dev, "%s: dma_addr %08x, size %08x\n", ++ __FUNCTION__, dma_addr, size); ++ return (dev->bus == &pci_bus_type ) && ++ ((dma_addr + size - PHYS_OFFSET) >= SZ_64M); ++} ++ ++/* ++ * Only first 64MB of memory can be accessed via PCI. ++ * We use GFP_DMA to allocate safe buffers to do map/unmap. ++ * This is really ugly and we need a better way of specifying ++ * DMA-capable regions of memory. ++ */ ++void __init it8152_adjust_zones(int node, unsigned long *zone_size, ++ unsigned long *zhole_size) ++{ ++ unsigned int sz = SZ_64M >> PAGE_SHIFT; ++ ++ /* ++ * Only adjust if > 64M on current system ++ */ ++ if (node || (zone_size[0] <= sz)) ++ return; ++ ++ zone_size[1] = zone_size[0] - sz; ++ zone_size[0] = sz; ++ zhole_size[1] = zhole_size[0]; ++ zhole_size[0] = 0; ++} ++ ++/* ++ * We override these so we properly do dmabounce otherwise drivers ++ * are able to set the dma_mask to 0xffffffff and we can no longer ++ * trap bounces. :( ++ * ++ * We just return true on everyhing except for < 64MB in which case ++ * we will fail miseralby and die since we can't handle that case. ++ */ ++int ++pci_set_dma_mask(struct pci_dev *dev, u64 mask) ++{ ++ printk(KERN_INFO "===> %s: %s %x\n", __FUNCTION__, dev->dev.bus_id, mask); ++ if (mask >= PHYS_OFFSET + SZ_64M - 1 ) ++ return 0; ++ ++ return -EIO; ++} ++ ++int ++pci_set_consistent_dma_mask(struct pci_dev *dev, u64 mask) ++{ ++ printk(KERN_INFO "===> %s: %s %x\n", __FUNCTION__, dev->dev.bus_id, mask); ++ if (mask >= PHYS_OFFSET + SZ_64M - 1 ) ++ return 0; ++ ++ return -EIO; ++} ++ ++EXPORT_SYMBOL(pci_set_dma_mask); ++EXPORT_SYMBOL(pci_set_consistent_dma_mask); ++ ++ ++int __init it8152_pci_setup(int nr, struct pci_sys_data *sys) ++{ ++ it8152_io.start = IT8152_IO_BASE + 0x12000; ++ it8152_io.end = IT8152_IO_BASE + 0x100000; ++ ++ if (request_resource(&ioport_resource, &it8152_io)) { ++ printk(KERN_ERR "PCI: unable to allocate IO region\n"); ++ return -EBUSY; ++ } ++ if (request_resource(&iomem_resource, &it8152_mem1)) { ++ printk(KERN_ERR "PCI: unable to allocate memory region\n"); ++ return -EBUSY; ++ } ++ ++ sys->resource[0] = &it8152_io; ++ sys->resource[1] = &it8152_mem1; ++ ++ if (platform_notify || platform_notify_remove) { ++ printk(KERN_ERR "PCI: Can't use platform_notify\n"); ++ return -EBUSY; ++ } ++ ++ platform_notify = it8152_pci_platform_notify; ++ platform_notify_remove = it8152_pci_platform_notify_remove; ++ ++ return 1; ++} ++ ++/* ++ * If we set up a device for bus mastering, we need to check the latency ++ * timer as we don't have even crappy BIOSes to set it properly. ++ * The implementation is from arch/i386/pci/i386.c ++ */ ++unsigned int pcibios_max_latency = 255; ++ ++void pcibios_set_master(struct pci_dev *dev) ++{ ++ u8 lat; ++ ++ pci_read_config_byte(dev, PCI_LATENCY_TIMER, &lat); ++ if (lat < 16) ++ lat = (64 <= pcibios_max_latency) ? 64 : pcibios_max_latency; ++ else if (lat > pcibios_max_latency) ++ lat = pcibios_max_latency; ++ else ++ return; ++ printk(KERN_DEBUG "PCI: Setting latency timer of device %s to %d\n", pci_name(dev), lat); ++ pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat); ++} ++ ++ ++struct pci_bus * __init it8152_pci_scan_bus(int nr, struct pci_sys_data *sys) ++{ ++ return pci_scan_bus(nr, &it8152_ops, sys); ++} ++ +diff --git a/arch/arm/kernel/bios32.c b/arch/arm/kernel/bios32.c +index 240c448..d8d2352 100644 +--- a/arch/arm/kernel/bios32.c ++++ b/arch/arm/kernel/bios32.c +@@ -279,6 +279,25 @@ static void __devinit pci_fixup_cy82c693(struct pci_dev *dev) + } + DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_CONTAQ, PCI_DEVICE_ID_CONTAQ_82C693, pci_fixup_cy82c693); + ++static void __init pci_fixup_it8152(struct pci_dev *dev) ++{ ++ int i; ++ /* fixup for ITE 8152 devices */ ++ /* FIXME: add defines for class 0x68000 and 0x80103 */ ++ if ((dev->class >> 8) == PCI_CLASS_BRIDGE_HOST || ++ dev->class == 0x68000 || ++ dev->class == 0x80103) { ++ for (i = 0; i < PCI_NUM_RESOURCES; i++) { ++ dev->resource[i].start = 0; ++ dev->resource[i].end = 0; ++ dev->resource[i].flags = 0; ++ } ++ } ++} ++DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ITE, PCI_DEVICE_ID_ITE_8152, pci_fixup_it8152); ++ ++ ++ + void __devinit pcibios_update_irq(struct pci_dev *dev, int irq) + { + if (debug_pci) +@@ -292,9 +311,12 @@ void __devinit pcibios_update_irq(struct pci_dev *dev, int irq) + */ + static inline int pdev_bad_for_parity(struct pci_dev *dev) + { +- return (dev->vendor == PCI_VENDOR_ID_INTERG && +- (dev->device == PCI_DEVICE_ID_INTERG_2000 || +- dev->device == PCI_DEVICE_ID_INTERG_2010)); ++ return ((dev->vendor == PCI_VENDOR_ID_INTERG && ++ (dev->device == PCI_DEVICE_ID_INTERG_2000 || ++ dev->device == PCI_DEVICE_ID_INTERG_2010)) || ++ (dev->vendor == PCI_VENDOR_ID_ITE && ++ dev->device == PCI_DEVICE_ID_ITE_8152)); ++ + } + + /* +diff --git a/include/asm-arm/hardware/it8152.h b/include/asm-arm/hardware/it8152.h +new file mode 100644 +index 0000000..d28210d +--- /dev/null ++++ b/include/asm-arm/hardware/it8152.h +@@ -0,0 +1,104 @@ ++/* ++ * arch/arm/mach-pxa/it8152.h ++ * ++ * Compulab Ltd., 2006 ++ * ++ * ITE 8152 companion chip definitions ++ */ ++ ++ ++/* #define CMX270_IT8152_VIRT (CMX270_VIRT_BASE) */ ++ ++ ++extern unsigned long it8152_base_address; ++ ++#define IT8152_IO_BASE (it8152_base_address + 0x03e00000) ++#define IT8152_CFGREG_BASE (it8152_base_address + 0x03f00000) ++ ++/* #define IRQ_GPIO_IT8152_IRQ IRQ_GPIO(GPIO_IT8152_IRQ) */ ++ ++#define IT8152_SHORT_IO(x) (*((volatile unsigned short *)(IT8152_CFGREG_BASE+(x)))) ++#define IT8152_LONG_IO(x) (*((volatile unsigned long *)(IT8152_CFGREG_BASE+(x)))) ++ ++ ++#define IT8152_PCI_MEMBASE (*((volatile unsigned long *)(it8152_base_address))) ++/* #define IT8152_PCI_IOBASE (*((volatile unsigned long *)(it8152_base_address + 0x3e00000))) */ ++ ++#define IT8152_PCI_IACK (*((volatile unsigned long *)(it8152_base_address + 0x3f00808))) ++#define IT8152_PCI_CFG_ADDR (*((volatile unsigned long *)(it8152_base_address + 0x3f00800))) ++#define IT8152_PCI_CFG_DATA (*((volatile unsigned long *)(it8152_base_address + 0x3f00804))) ++ ++#define IT_BUSNUM_SHF 16 ++#define IT_DEVNUM_SHF 11 ++#define IT_FUNCNUM_SHF 8 ++#define IT_REGNUM_SHF 2 ++ ++/* Power management & PLL registers */ ++#define IT8152_PMPLL_DSR IT8152_LONG_IO(0x00) ++#define IT8152_PMPLL_DSSR IT8152_LONG_IO(0x04) ++#define IT8152_PMPLL_PLLCR IT8152_LONG_IO(0x20) ++#define IT8152_PMPLL_MFSR IT8152_LONG_IO(0x24) ++ ++/* Memory controller */ ++#define IT8152_MC_REG_OFFSET 0x100 ++ ++#define IT8152_MC_SDCR IT8152_LONG_IO(IT8152_MC_REG_OFFSET + 0x00) ++#define IT8152_MC_PCICR IT8152_LONG_IO(IT8152_MC_REG_OFFSET + 0x04) ++ ++/* Interrupt related definitions */ ++#define IT8152_INTC_REG_OFFSET 0x300 ++ ++#define IT8152_INTC_LDCNIRR IT8152_LONG_IO(IT8152_INTC_REG_OFFSET + 0x00) ++#define IT8152_INTC_LDPNIRR IT8152_LONG_IO(IT8152_INTC_REG_OFFSET + 0x04) ++#define IT8152_INTC_LDCNIMR IT8152_LONG_IO(IT8152_INTC_REG_OFFSET + 0x08) ++#define IT8152_INTC_LDPNIMR IT8152_LONG_IO(IT8152_INTC_REG_OFFSET + 0x0C) ++#define IT8152_INTC_LDNITR IT8152_LONG_IO(IT8152_INTC_REG_OFFSET + 0x10) ++#define IT8152_INTC_LDNIAR IT8152_LONG_IO(IT8152_INTC_REG_OFFSET + 0x14) ++#define IT8152_INTC_LPCNIRR IT8152_LONG_IO(IT8152_INTC_REG_OFFSET + 0x20) ++#define IT8152_INTC_LPPNIRR IT8152_LONG_IO(IT8152_INTC_REG_OFFSET + 0x24) ++#define IT8152_INTC_LPCNIMR IT8152_LONG_IO(IT8152_INTC_REG_OFFSET + 0x28) ++#define IT8152_INTC_LPPNIMR IT8152_LONG_IO(IT8152_INTC_REG_OFFSET + 0x2C) ++#define IT8152_INTC_LPNITR IT8152_LONG_IO(IT8152_INTC_REG_OFFSET + 0x30) ++#define IT8152_INTC_LPNIAR IT8152_LONG_IO(IT8152_INTC_REG_OFFSET + 0x34) ++#define IT8152_INTC_PDCNIRR IT8152_LONG_IO(IT8152_INTC_REG_OFFSET + 0x40) ++#define IT8152_INTC_PDPNIRR IT8152_LONG_IO(IT8152_INTC_REG_OFFSET + 0x44) ++#define IT8152_INTC_PDCNIMR IT8152_LONG_IO(IT8152_INTC_REG_OFFSET + 0x48) ++#define IT8152_INTC_PDPNIMR IT8152_LONG_IO(IT8152_INTC_REG_OFFSET + 0x4C) ++#define IT8152_INTC_PDNITR IT8152_LONG_IO(IT8152_INTC_REG_OFFSET + 0x50) ++#define IT8152_INTC_PDNIAR IT8152_LONG_IO(IT8152_INTC_REG_OFFSET + 0x54) ++#define IT8152_INTC_INTC_TYPER IT8152_LONG_IO(IT8152_INTC_REG_OFFSET + 0xFC) ++ ++#define IT8152_UART_BASE IT8152_LONG_IO(0x200) ++ ++#define IT8152_GPIO_REG_OFFSET 0x500 ++ ++#define IT8152_GPIO_GPLR IT8152_LONG_IO(IT8152_GPIO_REG_OFFSET) ++#define IT8152_GPIO_GPCR12 IT8152_LONG_IO(IT8152_GPIO_REG_OFFSET + 0x04) ++#define IT8152_GPIO_GPCR34 IT8152_LONG_IO(IT8152_GPIO_REG_OFFSET + 0x08) ++ ++ ++/* Interrupt bit definitions */ ++#define PCISERR_BIT (1<<14) ++#define H2PTADR_BIT (1<<13) ++#define H2PMAR_BIT (1<<12) ++#define PCI_INTD_BIT (1<<11) ++#define PCI_INTC_BIT (1<<10) ++#define PCI_INTB_BIT (1<<9) ++#define PCI_INTA_BIT (1<<8) ++#define CDMA_INT_BIT (1<<2) ++#define USB_INT_BIT (1<<1) ++#define AUDIO_INT_BIT (1<<0) ++ ++/* IT8152 UART */ ++#define ITESER_BIT (1<<5) ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ +diff --git a/include/asm-arm/pci.h b/include/asm-arm/pci.h +index f21abd4..2cf30bf 100644 +--- a/include/asm-arm/pci.h ++++ b/include/asm-arm/pci.h +@@ -8,10 +8,17 @@ + + #define pcibios_scan_all_fns(a, b) 0 + ++#ifdef CONFIG_PCI_HOST_ITE8152 ++/* ITE bridge requires setting latency timer to avoid early bus access ++ termination by PIC bus mater devices ++*/ ++extern void pcibios_set_master(struct pci_dev *dev); ++#else + static inline void pcibios_set_master(struct pci_dev *dev) + { + /* No special bus mastering setup handling */ + } ++#endif + + static inline void pcibios_penalize_isa_irq(int irq, int active) + { +diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h +index 5b1c999..b4c81d5 100644 +--- a/include/linux/pci_ids.h ++++ b/include/linux/pci_ids.h +@@ -1650,6 +1650,7 @@ + #define PCI_DEVICE_ID_ITE_8211 0x8211 + #define PCI_DEVICE_ID_ITE_8212 0x8212 + #define PCI_DEVICE_ID_ITE_8213 0x8213 ++#define PCI_DEVICE_ID_ITE_8152 0x8152 + #define PCI_DEVICE_ID_ITE_8872 0x8872 + #define PCI_DEVICE_ID_ITE_IT8330G_0 0xe886 + +-- +1.5.1.6 + diff --git a/packages/linux/linux-2.6.22/cm-x270/0005-cm-x270-pcmcia.patch b/packages/linux/linux-2.6.22/cm-x270/0005-cm-x270-pcmcia.patch new file mode 100644 index 0000000000..7dceff5c9d --- /dev/null +++ b/packages/linux/linux-2.6.22/cm-x270/0005-cm-x270-pcmcia.patch @@ -0,0 +1,228 @@ +From 338653da8f8afcdf8afc7e8a5a0104d5083597cc Mon Sep 17 00:00:00 2001 +From: Cliff Brake <cbrake@happy.dev.bec-systems.com> +Date: Fri, 20 Jul 2007 19:01:27 -0400 +Subject: [PATCH] cm-x270-pcmcia + +--- + drivers/pcmcia/Makefile | 1 + + drivers/pcmcia/pxa2xx_cm_x270.c | 198 +++++++++++++++++++++++++++++++++++++++ + 2 files changed, 199 insertions(+), 0 deletions(-) + create mode 100644 drivers/pcmcia/pxa2xx_cm_x270.c + +diff --git a/drivers/pcmcia/Makefile b/drivers/pcmcia/Makefile +index 4276965..353d5b7 100644 +--- a/drivers/pcmcia/Makefile ++++ b/drivers/pcmcia/Makefile +@@ -69,4 +69,5 @@ sa1100_cs-$(CONFIG_SA1100_SIMPAD) += sa1100_simpad.o + pxa2xx_cs-$(CONFIG_ARCH_LUBBOCK) += pxa2xx_lubbock.o sa1111_generic.o + pxa2xx_cs-$(CONFIG_MACH_MAINSTONE) += pxa2xx_mainstone.o + pxa2xx_cs-$(CONFIG_PXA_SHARPSL) += pxa2xx_sharpsl.o ++pxa2xx_cs-$(CONFIG_MACH_ARMCORE) += pxa2xx_cm_x270.o + +diff --git a/drivers/pcmcia/pxa2xx_cm_x270.c b/drivers/pcmcia/pxa2xx_cm_x270.c +new file mode 100644 +index 0000000..25e369f +--- /dev/null ++++ b/drivers/pcmcia/pxa2xx_cm_x270.c +@@ -0,0 +1,198 @@ ++/* ++ * linux/drivers/pcmcia/pxa/pxa_armcore.c ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ * Compulab Ltd., 2003 ++ * ++ */ ++ ++#include <linux/kernel.h> ++#include <linux/sched.h> ++#include <linux/platform_device.h> ++#include <linux/irq.h> ++ ++#include <pcmcia/ss.h> ++#include <asm/delay.h> ++#include <asm/hardware.h> ++ ++#include <asm/arch/pxa-regs.h> ++#include <asm/arch/cm-x270.h> ++ ++#include "soc_common.h" ++ ++ ++static struct pcmcia_irqs irqs[] = { ++ { 0, PCMCIA_S0_CD_VALID, "PCMCIA0 CD" }, ++ { 1, PCMCIA_S1_CD_VALID, "PCMCIA1 CD" }, ++}; ++ ++ ++static int ++cmx270_pcmcia_hw_init(struct soc_pcmcia_socket *skt) ++{ ++ int return_val=0; ++ ++ GPSR(GPIO48_nPOE) = GPIO_bit(GPIO48_nPOE) | ++ GPIO_bit(GPIO49_nPWE) | ++ GPIO_bit(GPIO50_nPIOR) | ++ GPIO_bit(GPIO51_nPIOW) | ++ GPIO_bit(GPIO85_nPCE_1) | ++ GPIO_bit(GPIO54_nPCE_2); ++ ++ pxa_gpio_mode(GPIO48_nPOE_MD); ++ pxa_gpio_mode(GPIO49_nPWE_MD); ++ pxa_gpio_mode(GPIO50_nPIOR_MD); ++ pxa_gpio_mode(GPIO51_nPIOW_MD); ++ pxa_gpio_mode(GPIO85_nPCE_1_MD); ++ pxa_gpio_mode(GPIO54_nPCE_2_MD); ++ //pxa_gpio_mode(GPIO79_pSKTSEL_MD); /* REVISIT: s/b dependent on num sockets (on ATX base not routed)*/ ++ pxa_gpio_mode(GPIO55_nPREG_MD); ++ pxa_gpio_mode(GPIO56_nPWAIT_MD); ++ pxa_gpio_mode(GPIO57_nIOIS16_MD); ++ ++ // Reset signal ++ GPDR(GPIO53_nPCE_2) |= GPIO_bit(GPIO53_nPCE_2); ++ GPCR(GPIO53_nPCE_2) = GPIO_bit(GPIO53_nPCE_2); ++ ++ GPDR(IRQ_TO_GPIO(PCMCIA_S0_CD_VALID)) &= ~GPIO_bit(IRQ_TO_GPIO(PCMCIA_S0_CD_VALID)); ++ GPDR(IRQ_TO_GPIO(PCMCIA_S1_CD_VALID)) &= ~GPIO_bit(IRQ_TO_GPIO(PCMCIA_S1_CD_VALID)); ++ ++ set_irq_type(PCMCIA_S0_CD_VALID, IRQ_TYPE_EDGE_BOTH); ++ set_irq_type(PCMCIA_S1_CD_VALID, IRQ_TYPE_EDGE_BOTH); ++ ++ //irq's for slots: ++ GPDR(IRQ_TO_GPIO(PCMCIA_S0_RDYINT)) &= ~GPIO_bit(IRQ_TO_GPIO(PCMCIA_S0_RDYINT)); ++ GPDR(IRQ_TO_GPIO(PCMCIA_S1_RDYINT)) &= ~GPIO_bit(IRQ_TO_GPIO(PCMCIA_S1_RDYINT)); ++ ++ set_irq_type(PCMCIA_S0_RDYINT, IRQ_TYPE_EDGE_FALLING); ++ set_irq_type(PCMCIA_S1_RDYINT, IRQ_TYPE_EDGE_FALLING); ++ ++ skt->irq = (skt->nr == 0) ? PCMCIA_S0_RDYINT : PCMCIA_S1_RDYINT; ++ return_val = soc_pcmcia_request_irqs(skt, irqs, ARRAY_SIZE(irqs)); ++ ++ return return_val; ++} ++ ++ ++static void cmx270_pcmcia_shutdown(struct soc_pcmcia_socket *skt) ++{ ++ soc_pcmcia_free_irqs(skt, irqs, ARRAY_SIZE(irqs)); ++ ++ set_irq_type(IRQ_TO_GPIO(PCMCIA_S0_CD_VALID), IRQ_TYPE_NONE); ++ set_irq_type(IRQ_TO_GPIO(PCMCIA_S1_CD_VALID), IRQ_TYPE_NONE); ++ ++ set_irq_type(IRQ_TO_GPIO(PCMCIA_S0_RDYINT), IRQ_TYPE_NONE); ++ set_irq_type(IRQ_TO_GPIO(PCMCIA_S1_RDYINT), IRQ_TYPE_NONE); ++} ++ ++ ++static void cmx270_pcmcia_socket_state(struct soc_pcmcia_socket *skt, ++ struct pcmcia_state *state) ++{ ++ ++ state->detect = (PCC_DETECT(skt->nr) == 0) ? 1 : 0; ++ state->ready = (PCC_READY(skt->nr) == 0) ? 0 : 1; ++ state->bvd1 = 1; ++ state->bvd2 = 1; ++ state->vs_3v = 0; ++ state->vs_Xv = 0; ++ state->wrprot = 0; /* not available */ ++ ++} ++ ++ ++static int ++cmx270_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, ++ const socket_state_t *state) ++{ ++ ++ GPSR(GPIO49_nPWE) = GPIO_bit(GPIO49_nPWE); ++ pxa_gpio_mode(GPIO49_nPWE | GPIO_OUT); ++ //pxa_gpio_mode(GPIO79_pSKTSEL_MD | GPIO_OUT); /* For 2-socket mode */ ++ ++ switch(skt->nr){ ++ case 0: ++ if(state->flags & SS_RESET) { ++ //GPCR(GPIO79_pSKTSEL) = GPIO_bit(GPIO79_pSKTSEL); /* For 2-socket mode */ ++ //udelay(1); ++ GPCR(GPIO49_nPWE) = GPIO_bit(GPIO49_nPWE); ++ GPSR(GPIO53_nPCE_2) = GPIO_bit(GPIO53_nPCE_2); ++ udelay(10); ++ GPCR(GPIO53_nPCE_2) = GPIO_bit(GPIO53_nPCE_2); ++ GPSR(GPIO49_nPWE) = GPIO_bit(GPIO49_nPWE); ++ } ++ break; ++ case 1: ++ if(state->flags & SS_RESET) { ++ //GPCR(GPIO79_pSKTSEL) = GPIO_bit(GPIO79_pSKTSEL); /* For 2-socket mode */ ++ //udelay(1); ++ GPCR(GPIO49_nPWE) = GPIO_bit(GPIO49_nPWE); ++ GPSR(GPIO53_nPCE_2) = GPIO_bit(GPIO53_nPCE_2); ++ udelay(10); ++ GPCR(GPIO53_nPCE_2) = GPIO_bit(GPIO53_nPCE_2); ++ GPSR(GPIO49_nPWE) = GPIO_bit(GPIO49_nPWE); ++ } ++ break; ++ } ++ ++ pxa_gpio_mode(GPIO49_nPWE_MD); ++ //pxa_gpio_mode(GPIO79_pSKTSEL_MD); /* For 2-socket mode */ ++ ++ ++ return 0; ++} ++ ++static void cmx270_pcmcia_socket_init(struct soc_pcmcia_socket *skt) ++{ ++} ++ ++static void cmx270_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt) ++{ ++} ++ ++ ++static struct pcmcia_low_level cmx270_pcmcia_ops = { ++ .owner = THIS_MODULE, ++ .hw_init = cmx270_pcmcia_hw_init, ++ .hw_shutdown = cmx270_pcmcia_shutdown, ++ .socket_state = cmx270_pcmcia_socket_state, ++ .configure_socket = cmx270_pcmcia_configure_socket, ++ .socket_init = cmx270_pcmcia_socket_init, ++ .socket_suspend = cmx270_pcmcia_socket_suspend, ++ .nr = 2, ++}; ++ ++static struct platform_device *cmx270_pcmcia_device; ++ ++static int __init cmx270_pcmcia_init(void) ++{ ++ int ret; ++ ++ cmx270_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1); ++ ++ if (!cmx270_pcmcia_device) ++ return -ENOMEM; ++ ++ cmx270_pcmcia_device->dev.platform_data = &cmx270_pcmcia_ops; ++ ++ printk ("Registering cm-x270 PCMCIA interface.\n"); ++ ret = platform_device_add(cmx270_pcmcia_device); ++ ++ if (ret) ++ platform_device_put(cmx270_pcmcia_device); ++ ++ return ret; ++} ++ ++static void __exit cmx270_pcmcia_exit(void) ++{ ++ platform_device_unregister(cmx270_pcmcia_device); ++} ++ ++module_init(cmx270_pcmcia_init); ++module_exit(cmx270_pcmcia_exit); ++ ++MODULE_LICENSE("GPL"); +-- +1.5.1.6 + diff --git a/packages/linux/linux-2.6.22/cm-x270/0006-ramdisk_load.patch b/packages/linux/linux-2.6.22/cm-x270/0006-ramdisk_load.patch new file mode 100644 index 0000000000..aa25dd9bfc --- /dev/null +++ b/packages/linux/linux-2.6.22/cm-x270/0006-ramdisk_load.patch @@ -0,0 +1,80 @@ +From ca4508b1266109208f62e986b51397ce2788e255 Mon Sep 17 00:00:00 2001 +From: Cliff Brake <cbrake@happy.dev.bec-systems.com> +Date: Fri, 20 Jul 2007 19:01:50 -0400 +Subject: [PATCH] ramdisk_load + +--- + arch/arm/mach-pxa/cm-x270.c | 6 ++++++ + include/asm-arm/arch-pxa/cm-x270.h | 2 ++ + init/initramfs.c | 16 ++++++++++++++++ + 3 files changed, 24 insertions(+), 0 deletions(-) + +diff --git a/arch/arm/mach-pxa/cm-x270.c b/arch/arm/mach-pxa/cm-x270.c +index 88b080d..c6ec489 100644 +--- a/arch/arm/mach-pxa/cm-x270.c ++++ b/arch/arm/mach-pxa/cm-x270.c +@@ -308,6 +308,12 @@ static struct map_desc cmx270_io_desc[] __initdata = { + .length = PXA_CS_SIZE, + .type = MT_DEVICE + }, ++ [2] = { /* NOR flash */ ++ .virtual = CMX270_FLASH_VIRT, ++ .pfn = __phys_to_pfn(PXA_CS0_PHYS), ++ .length = (8<<20), /* up to 8 MByte flash */ ++ .type = MT_DEVICE ++ }, + }; + + /* +diff --git a/include/asm-arm/arch-pxa/cm-x270.h b/include/asm-arm/arch-pxa/cm-x270.h +index 24613a5..aad152e 100644 +--- a/include/asm-arm/arch-pxa/cm-x270.h ++++ b/include/asm-arm/arch-pxa/cm-x270.h +@@ -20,7 +20,9 @@ + + #define CMX270_IT8152_VIRT (CMX270_VIRT_BASE) + #define CMX270_IDE104_VIRT (CMX270_IT8152_VIRT + PXA_CS_SIZE) ++#define CMX270_FLASH_VIRT (CMX270_IDE104_VIRT + PXA_CS_SIZE) + ++#define CMX270_FLASH_RAMDISK_VIRT (CMX270_FLASH_VIRT + 0x1c0000) + + /* GPIO related definitions */ + #define GPIO_IT8152_IRQ (22) +diff --git a/init/initramfs.c b/init/initramfs.c +index 00eff7a..0ecd40b 100644 +--- a/init/initramfs.c ++++ b/init/initramfs.c +@@ -7,6 +7,9 @@ + #include <linux/string.h> + #include <linux/syscalls.h> + ++// HACK for compulab cm-x270 ++#include <asm/arch/cm-x270.h> ++ + static __initdata char *message; + static void __init error(char *x) + { +@@ -550,7 +553,20 @@ static int __init populate_rootfs(void) + #ifdef CONFIG_BLK_DEV_INITRD + if (initrd_start) { + #ifdef CONFIG_BLK_DEV_RAM ++ ++ /* hack to make initramfs work because the ++ * compulab BL does not zero out the ++ * initrd memory. This only seems to affect loading ++ * initramfs (cpio.gz) archives. Does not seem to ++ * affect ramdisks. ++ */ ++ int initrd_size = *(int *)(CMX270_FLASH_RAMDISK_VIRT); + int fd; ++ ++ initrd_end = initrd_start + initrd_size; ++ //printk("CLIFF: initrd_start = 0x%x\n", initrd_start); ++ //printk("CLIFF: initrd_end = 0x%x\n", initrd_end); ++ + printk(KERN_INFO "checking if image is initramfs..."); + err = unpack_to_rootfs((char *)initrd_start, + initrd_end - initrd_start, 1); +-- +1.5.1.6 + diff --git a/packages/linux/linux-2.6.22/cm-x270/0007-mmcsd_large_cards-r0.patch b/packages/linux/linux-2.6.22/cm-x270/0007-mmcsd_large_cards-r0.patch new file mode 100644 index 0000000000..90e66b5308 --- /dev/null +++ b/packages/linux/linux-2.6.22/cm-x270/0007-mmcsd_large_cards-r0.patch @@ -0,0 +1,36 @@ +From 26638b93f7479dc597a58e2e2b2832c6ff4c8f7b Mon Sep 17 00:00:00 2001 +From: Cliff Brake <cbrake@happy.dev.bec-systems.com> +Date: Fri, 20 Jul 2007 19:02:55 -0400 +Subject: [PATCH] mmcsd_large_cards-r0 + +--- + drivers/mmc/card/block.c | 6 ++++++ + 1 files changed, 6 insertions(+), 0 deletions(-) + +diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c +index 540ff4b..1f8d67d 100644 +--- a/drivers/mmc/card/block.c ++++ b/drivers/mmc/card/block.c +@@ -403,6 +403,7 @@ static struct mmc_blk_data *mmc_blk_alloc(struct mmc_card *card) + { + struct mmc_blk_data *md; + int devidx, ret; ++ unsigned long cap; + + devidx = find_first_zero_bit(dev_use, MMC_NUM_MINORS); + if (devidx >= MMC_NUM_MINORS) +@@ -467,6 +468,11 @@ static struct mmc_blk_data *mmc_blk_alloc(struct mmc_card *card) + + sprintf(md->disk->disk_name, "mmcblk%d", devidx); + ++ if (card->csd.read_blkbits > 9) ++ md->block_bits = 9; ++ else ++ md->block_bits = card->csd.read_blkbits; ++ + blk_queue_hardsect_size(md->queue.queue, 1 << md->block_bits); + + if (!mmc_card_sd(card) && mmc_card_blockaddr(card)) { +-- +1.5.1.6 + diff --git a/packages/linux/linux-2.6.22/cm-x270/0008-cm-x270-nand-simplify-name.patch b/packages/linux/linux-2.6.22/cm-x270/0008-cm-x270-nand-simplify-name.patch new file mode 100644 index 0000000000..c07f049e56 --- /dev/null +++ b/packages/linux/linux-2.6.22/cm-x270/0008-cm-x270-nand-simplify-name.patch @@ -0,0 +1,25 @@ +From e1a243564a40d7542a62d4684f2e6ce0b95fa267 Mon Sep 17 00:00:00 2001 +From: Cliff Brake <cbrake@happy.dev.bec-systems.com> +Date: Fri, 20 Jul 2007 19:04:12 -0400 +Subject: [PATCH] cm-x270-nand-simplify-name + +--- + drivers/mtd/nand/cmx270_nand.c | 2 ++ + 1 files changed, 2 insertions(+), 0 deletions(-) + +diff --git a/drivers/mtd/nand/cmx270_nand.c b/drivers/mtd/nand/cmx270_nand.c +index cb663ef..3654ce4 100644 +--- a/drivers/mtd/nand/cmx270_nand.c ++++ b/drivers/mtd/nand/cmx270_nand.c +@@ -191,6 +191,8 @@ static int cmx270_init(void) + cmx270_nand_mtd->owner = THIS_MODULE; + cmx270_nand_mtd->priv = this; + ++ cmx270_nand_mtd->name = "cm-x270-nand"; ++ + /* insert callbacks */ + this->IO_ADDR_R = cmx270_nand_io; + this->IO_ADDR_W = cmx270_nand_io; +-- +1.5.1.6 + diff --git a/packages/linux/linux-2.6.22/cm-x270/0009-cursor-fix.patch b/packages/linux/linux-2.6.22/cm-x270/0009-cursor-fix.patch new file mode 100644 index 0000000000..08b0db36b0 --- /dev/null +++ b/packages/linux/linux-2.6.22/cm-x270/0009-cursor-fix.patch @@ -0,0 +1,43 @@ +From 94a59c25e4e0aec3c4d12e0c63e144e6af447368 Mon Sep 17 00:00:00 2001 +From: Cliff Brake <cbrake@happy.dev.bec-systems.com> +Date: Fri, 20 Jul 2007 19:04:42 -0400 +Subject: [PATCH] cursor-fix + +--- + drivers/char/vt.c | 4 ++-- + drivers/char/vt_ioctl.c | 4 ++-- + 2 files changed, 4 insertions(+), 4 deletions(-) + +diff --git a/drivers/char/vt.c b/drivers/char/vt.c +index 6650ae1..649474e 100644 +--- a/drivers/char/vt.c ++++ b/drivers/char/vt.c +@@ -3491,8 +3491,8 @@ void do_blank_screen(int entering_gfx) + } + return; + } +- if (blank_state != blank_normal_wait) +- return; ++ //if (blank_state != blank_normal_wait) ++ // return; + blank_state = blank_off; + + /* entering graphics mode? */ +diff --git a/drivers/char/vt_ioctl.c b/drivers/char/vt_ioctl.c +index c6f6f42..94121ff 100644 +--- a/drivers/char/vt_ioctl.c ++++ b/drivers/char/vt_ioctl.c +@@ -489,8 +489,8 @@ int vt_ioctl(struct tty_struct *tty, struct file * file, + if (vc->vc_mode == (unsigned char) arg) + return 0; + vc->vc_mode = (unsigned char) arg; +- if (console != fg_console) +- return 0; ++ //if (console != fg_console) ++ // return 0; + /* + * explicitly blank/unblank the screen if switching modes + */ +-- +1.5.1.6 + diff --git a/packages/linux/linux-2.6.22/cm-x270/defconfig b/packages/linux/linux-2.6.22/cm-x270/defconfig new file mode 100644 index 0000000000..63bc69533f --- /dev/null +++ b/packages/linux/linux-2.6.22/cm-x270/defconfig @@ -0,0 +1,1234 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.22 +# Tue Aug 7 15:22:23 2007 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +# CONFIG_GENERIC_CLOCKEVENTS is not set +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ZONE_DMA=y +CONFIG_ARCH_MTD_XIP=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="-cm-x270" +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set +# CONFIG_AUDIT is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y + +# +# Block layer +# +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_PNX4008 is not set +CONFIG_ARCH_PXA=y +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set + +# +# Intel PXA2xx Implementations +# +# CONFIG_ARCH_LUBBOCK is not set +# CONFIG_MACH_LOGICPD_PXA270 is not set +# CONFIG_MACH_MAINSTONE is not set +# CONFIG_ARCH_PXA_IDP is not set +# CONFIG_PXA_SHARPSL is not set +# CONFIG_MACH_TRIZEPS4 is not set +CONFIG_MACH_ARMCORE=y +CONFIG_PXA27x=y + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_XSCALE=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5T=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_OUTER_CACHE is not set +CONFIG_IWMMXT=y +CONFIG_XSCALE_PMU=y + +# +# Bus support +# +# CONFIG_PCI is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +# CONFIG_TICK_ONESHOT is not set +CONFIG_PREEMPT=y +CONFIG_NO_IDLE_HZ=y +CONFIG_HZ=100 +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="console=ttyS1,38400 monitor=8 bpp=16 mem=64M mtdparts=physmap-flash.0:256k(boot)ro,0x180000(kernel),-(root);cm-x270-nand:64m(app),-(data) rdinit=/sbin/init root=mtd3 rootfstype=jffs2" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +# CONFIG_FPE_NWFPE is not set +# CONFIG_FPE_FASTFPE is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +# CONFIG_PM is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_SYS_HYPERVISOR is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_XIP is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_START=0x0 +CONFIG_MTD_PHYSMAP_LEN=0x400000 +CONFIG_MTD_PHYSMAP_BANKWIDTH=2 +# CONFIG_MTD_ARM_INTEGRATOR is not set +# CONFIG_MTD_SHARP_SL is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +# CONFIG_MTD_NAND_H1900 is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_SHARPSL is not set +CONFIG_MTD_NAND_CM_X270=y +# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# +# CONFIG_PNPACPI is not set + +# +# Block devices +# +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set + +# +# SCSI low-level drivers +# +# CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_ATA is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_PHYLIB is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_SMC91X is not set +CONFIG_DM9000=y +CONFIG_DM9000_NOEPROM=y +# CONFIG_SMC911X is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set + +# +# USB Network Adapters +# +CONFIG_USB_CATC=m +CONFIG_USB_KAWETH=m +CONFIG_USB_PEGASUS=m +CONFIG_USB_RTL8150=m +CONFIG_USB_USBNET_MII=m +CONFIG_USB_USBNET=m +CONFIG_USB_NET_AX8817X=m +CONFIG_USB_NET_CDCETHER=m +# CONFIG_USB_NET_DM9601 is not set +CONFIG_USB_NET_GL620A=m +CONFIG_USB_NET_NET1080=m +CONFIG_USB_NET_PLUSB=m +CONFIG_USB_NET_MCS7830=m +# CONFIG_USB_NET_RNDIS_HOST is not set +# CONFIG_USB_NET_CDC_SUBSET is not set +# CONFIG_USB_NET_ZAURUS is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +CONFIG_INPUT_EVDEV=m +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_ATKBD=y +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_PXA27x is not set +# CONFIG_KEYBOARD_GPIO is not set +CONFIG_INPUT_MOUSE=y +CONFIG_MOUSE_PS2=y +# CONFIG_MOUSE_PS2_ALPS is not set +# CONFIG_MOUSE_PS2_LOGIPS2PP is not set +# CONFIG_MOUSE_PS2_SYNAPTICS is not set +# CONFIG_MOUSE_PS2_LIFEBOOK is not set +# CONFIG_MOUSE_PS2_TRACKPOINT is not set +# CONFIG_MOUSE_PS2_TOUCHKIT is not set +# CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_APPLETOUCH is not set +# CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +CONFIG_TOUCHSCREEN_UCB1400=m +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_SERPORT=y +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_PXA=y +CONFIG_SERIAL_PXA_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set +# CONFIG_WATCHDOG is not set +CONFIG_HW_RANDOM=y +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set +CONFIG_I2C=m +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=m + +# +# I2C Algorithms +# +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_GPIO is not set +CONFIG_I2C_PXA=m +# CONFIG_I2C_PXA_SLAVE is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1029 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_MAX6650 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Misc devices +# + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set + +# +# LED devices +# +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y + +# +# LED drivers +# +CONFIG_LEDS_CM_X270=y + +# +# LED Triggers +# +# CONFIG_LEDS_TRIGGERS is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_SYS_FOPS is not set +CONFIG_FB_DEFERRED_IO=y +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +CONFIG_FB_PXA=y +CONFIG_FB_PXA_PARAMETERS=y +# CONFIG_FB_MBX is not set +# CONFIG_FB_VIRTUAL is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +# CONFIG_LOGO is not set + +# +# Sound +# +CONFIG_SOUND=m + +# +# Advanced Linux Sound Architecture +# +CONFIG_SND=m +CONFIG_SND_TIMER=m +CONFIG_SND_PCM=m +# CONFIG_SND_SEQUENCER is not set +# CONFIG_SND_MIXER_OSS is not set +# CONFIG_SND_PCM_OSS is not set +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set + +# +# Generic devices +# +CONFIG_SND_AC97_CODEC=m +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set + +# +# ALSA ARM devices +# +CONFIG_SND_PXA2XX_PCM=m +CONFIG_SND_PXA2XX_AC97=m + +# +# USB devices +# +# CONFIG_SND_USB_AUDIO is not set +# CONFIG_SND_USB_CAIAQ is not set + +# +# System on Chip audio support +# +# CONFIG_SND_SOC is not set + +# +# Open Sound System +# +# CONFIG_SOUND_PRIME is not set +CONFIG_AC97_BUS=m + +# +# HID Devices +# +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=y +# CONFIG_USB_HIDINPUT_POWERBOOK is not set +# CONFIG_HID_FF is not set +# CONFIG_USB_HIDDEV is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_DEVICE_CLASS is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_SL811_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set +CONFIG_USB_MON=y + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set +CONFIG_MMC=m +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD Card Drivers +# +CONFIG_MMC_BLOCK=m + +# +# MMC/SD Host Controller Drivers +# +CONFIG_MMC_PXA=m + +# +# Real Time Clock +# +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +CONFIG_JFFS2_SUMMARY=y +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +# CONFIG_NFS_FS is not set +# CONFIG_NFSD is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_FRAME_POINTER=y +# CONFIG_DEBUG_USER is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y |