summaryrefslogtreecommitdiff
path: root/packages/linux/ixp4xx-kernel/2.6.16/97-ds101-setup.patch
diff options
context:
space:
mode:
Diffstat (limited to 'packages/linux/ixp4xx-kernel/2.6.16/97-ds101-setup.patch')
-rw-r--r--packages/linux/ixp4xx-kernel/2.6.16/97-ds101-setup.patch288
1 files changed, 0 insertions, 288 deletions
diff --git a/packages/linux/ixp4xx-kernel/2.6.16/97-ds101-setup.patch b/packages/linux/ixp4xx-kernel/2.6.16/97-ds101-setup.patch
deleted file mode 100644
index ac3f7d19c7..0000000000
--- a/packages/linux/ixp4xx-kernel/2.6.16/97-ds101-setup.patch
+++ /dev/null
@@ -1,288 +0,0 @@
-diff -ruN linux-2.6.15.orig/arch/arm/mach-ixp4xx/ds101-setup.c linux-2.6.15.new/arch/arm/mach-ixp4xx/ds101-setup.c
---- linux-2.6.15.orig/arch/arm/mach-ixp4xx/ds101-setup.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.15.new/arch/arm/mach-ixp4xx/ds101-setup.c 2006-02-11 02:17:35.000000000 +0100
-@@ -0,0 +1,284 @@
-+/*
-+ * arch/arm/mach-ixp4xx/ds101-setup.c
-+ *
-+ * DS 101 board-setup
-+ *
-+ * based ixdp425-setup.c:
-+ * Copyright (C) 2003-2004 MontaVista Software, Inc.
-+ *
-+ * Author: Alessandro Zummo <a.zummo@towertech.it>
-+ * Author: Rod Whitby <rod@whitby.id.au>
-+ * Author: OEyvind Repvik <oyvind@repvik.org>
-+ * Maintainers: http://www.nslu2-linux.org/
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/serial.h>
-+#include <linux/serial_8250.h>
-+#include <linux/mtd/mtd.h>
-+#include <linux/leds.h>
-+
-+#include <asm/setup.h>
-+#include <asm/memory.h>
-+#include <asm/mach-types.h>
-+#include <asm/mach/arch.h>
-+#include <asm/mach/flash.h>
-+
-+#include <net/maclist.h>
-+
-+static struct flash_platform_data ds101_flash_data = {
-+ .map_name = "cfi_probe",
-+ .width = 2,
-+};
-+
-+static struct resource ds101_flash_resource = {
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct platform_device ds101_flash = {
-+ .name = "IXP4XX-Flash",
-+ .id = 0,
-+ .dev.platform_data = &ds101_flash_data,
-+ .num_resources = 1,
-+ .resource = &ds101_flash_resource,
-+};
-+
-+#ifdef CONFIG_LEDS_CLASS
-+static struct resource ds101_led_resources[] = {
-+ {
-+ .name = "power", /* blue power led */
-+ .start = 3,
-+ .end = 3,
-+ .flags = IXP4XX_GPIO_LOW,
-+ },
-+ {
-+ .name = "status-1",
-+ .start = 14,
-+ .end = 14,
-+ .flags = IXP4XX_GPIO_LOW,
-+ },
-+ {
-+ .name = "status-2",
-+ .start = 15,
-+ .end = 15,
-+ .flags = IXP4XX_GPIO_LOW,
-+ },
-+ {
-+ .name = "usb-1", /* The usb-copy-button led */
-+ .start = 5,
-+ .end = 5,
-+ .flags = IXP4XX_GPIO_LOW,
-+ },
-+ {
-+ .name = "usb-2", /* also the usb-copy-button led */
-+ .start = 4,
-+ .end = 4,
-+ .flags = IXP4XX_GPIO_LOW,
-+ },
-+ {
-+ .name = "test",
-+ .start = 6,
-+ .end = 6,
-+ .flags = IXP4XX_GPIO_LOW,
-+ },
-+};
-+
-+
-+static struct platform_device ds101_leds = {
-+ .name = "IXP4XX-GPIO-LED",
-+ .id = -1,
-+ .num_resources = ARRAY_SIZE(ds101_led_resources),
-+ .resource = ds101_led_resources,
-+};
-+#endif
-+
-+static struct ixp4xx_i2c_pins ds101_i2c_gpio_pins = {
-+ .sda_pin = DS101_SDA_PIN,
-+ .scl_pin = DS101_SCL_PIN,
-+};
-+
-+static struct platform_device ds101_i2c_controller = {
-+ .name = "IXP4XX-I2C",
-+ .id = 0,
-+ .dev.platform_data = &ds101_i2c_gpio_pins,
-+ .num_resources = 0,
-+};
-+
-+static struct platform_device ds101_beeper = {
-+ .name = "ixp4xx-beeper",
-+ .id = 2,
-+ .num_resources = 0,
-+};
-+
-+static struct resource ds101_uart_resources[] = {
-+ {
-+ .start = IXP4XX_UART1_BASE_PHYS,
-+ .end = IXP4XX_UART1_BASE_PHYS + 0x0fff,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ {
-+ .start = IXP4XX_UART2_BASE_PHYS,
-+ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
-+ .flags = IORESOURCE_MEM,
-+ }
-+};
-+
-+static struct plat_serial8250_port ds101_uart_data[] = {
-+ {
-+ .mapbase = IXP4XX_UART1_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART1,
-+ .flags = UPF_BOOT_AUTOCONF,
-+ .iotype = UPIO_MEM,
-+ .regshift = 2,
-+ .uartclk = IXP4XX_UART_XTAL,
-+ },
-+ {
-+ .mapbase = IXP4XX_UART2_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART2,
-+ .flags = UPF_BOOT_AUTOCONF,
-+ .iotype = UPIO_MEM,
-+ .regshift = 2,
-+ .uartclk = IXP4XX_UART_XTAL,
-+ },
-+ { }
-+};
-+
-+static struct platform_device ds101_uart = {
-+ .name = "serial8250",
-+ .id = PLAT8250_DEV_PLATFORM,
-+ .dev.platform_data = ds101_uart_data,
-+ .num_resources = 2,
-+ .resource = ds101_uart_resources,
-+};
-+
-+static struct platform_device *ds101_devices[] __initdata = {
-+ &ds101_i2c_controller,
-+ &ds101_flash,
-+ &ds101_beeper,
-+};
-+
-+static void ds101_power_off(void)
-+{
-+ /* This causes the box to drop the power and go dead. */
-+
-+ /* enable the pwr cntl gpio */
-+ gpio_line_config(DS101_PO_GPIO, IXP4XX_GPIO_OUT);
-+
-+ /* do the deed */
-+ gpio_line_set(DS101_PO_GPIO, IXP4XX_GPIO_HIGH);
-+}
-+
-+/*
-+ * When the RedBoot config partition is added the MAC address is read from
-+ * it.
-+ * FIXME: This isn't correct on the DS101!
-+ */
-+static void ds101_flash_add(struct mtd_info *mtd) {
-+ if (strcmp(mtd->name, "RedBoot config") == 0) {
-+ size_t retlen;
-+ u_char mac[6];
-+
-+ /* The MAC is at a known offset... */
-+ if (mtd->read(mtd, 0x0FD8, 6, &retlen, mac) == 0 && retlen == 6) {
-+ printk(KERN_INFO "DS101 MAC: %.2x:%.2x:%.2x:%.2x:%.2x:%.2x\n",
-+ mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]);
-+ maclist_add(mac);
-+ } else {
-+ printk(KERN_ERR "DS101 MAC: read failed\n");
-+ }
-+ }
-+}
-+
-+/*
-+ * Nothing to do on remove at present.
-+ */
-+static void ds101_flash_remove(struct mtd_info *mtd) {
-+}
-+
-+static struct mtd_notifier ds101_flash_notifier = {
-+ .add = ds101_flash_add,
-+ .remove = ds101_flash_remove,
-+};
-+
-+static void __init ds101_init(void)
-+{
-+ /* The flash has an ethernet MAC embedded in it which we need,
-+ * that is all this notifier does.
-+ */
-+ register_mtd_user(&ds101_flash_notifier);
-+
-+ ixp4xx_sys_init();
-+
-+ ds101_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-+ ds101_flash_resource.end =
-+ IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
-+
-+ pm_power_off = ds101_power_off;
-+
-+ /* This is only useful on a modified machine, but it is valuable
-+ * to have it first in order to see debug messages, and so that
-+ * it does *not* get removed if platform_add_devices fails!
-+ */
-+ (void)platform_device_register(&ds101_uart);
-+
-+ platform_add_devices(ds101_devices, ARRAY_SIZE(ds101_devices));
-+
-+#ifdef CONFIG_LEDS_CLASS
-+ /* We don't care whether or not this works. */
-+ (void)platform_device_register(&ds101_leds);
-+#endif
-+}
-+
-+/*
-+ * DS101 bootstrap may pass in parameters, but we zap the mem
-+ * settings to be safe (the box always has 64MByte at 0). The
-+ * passed in command line can override this default, we prepend
-+ * to the config'ed default.
-+ *
-+ * NOTE: the startup sequence is:
-+ * 1) Call the machine fixup
-+ * 2) Parse the ATAG list, the ATAG_CMDLINE is copied in
-+ * to default_command_line which is the value of *from
-+ * 3) Parse the command line in *from (*not*
-+ * default_command_line unless they are the same!)
-+ *
-+ * Setting mi->nr_banks causes (2) to 'squash' (set to ATAG_NONE)
-+ * any ATAG_MEM tags, but mem= command line options cause nr_banks
-+ * to be reset to 0 (on the first mem=)
-+ */
-+static char ds101_command_line[] __initdata =
-+ "root=/dev/sda1 rootfstype=ext3 init=/sbin/init "
-+ CONFIG_CMDLINE;
-+
-+static void __init ds101_fixup(struct machine_desc *desc,
-+ struct tag *tags, char **cmdline, struct meminfo *mi)
-+{
-+ /* The DS101 has one bank of 64MByte memory.
-+ * NOTE: setting nr_banks != 0 causes kernel/setup.c to remove
-+ * the mem tags from the tag list. We need do nothing here!
-+ */
-+ mi->nr_banks=1;
-+ mi->bank[0].start = 0;
-+ mi->bank[0].size = (64*1024*1024);
-+ mi->bank[0].node = PHYS_TO_NID(0);
-+
-+ /* A command line in the ATAG list will override this one,
-+ * as is intended.
-+ */
-+ strlcpy(*cmdline, ds101_command_line, COMMAND_LINE_SIZE);
-+}
-+
-+MACHINE_START(DS101, "Synology DiskStation DS101")
-+ /* Maintainer: www.nslu2-linux.org */
-+ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
-+ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xFFFC,
-+ .boot_params = 0x00000100,
-+ .fixup = ds101_fixup,
-+ .map_io = ixp4xx_map_io,
-+ .init_irq = ixp4xx_init_irq,
-+ .timer = &ixp4xx_timer,
-+ .init_machine = ds101_init,
-+MACHINE_END
generated by cgit v1.2.3 (git 2.25.1) at 2024-09-22 14:28:56 +0000