diff options
Diffstat (limited to 'packages/initscripts/initscripts-1.0/openprotium/flashclean')
| -rwxr-xr-x | packages/initscripts/initscripts-1.0/openprotium/flashclean | 60 |
1 files changed, 0 insertions, 60 deletions
diff --git a/packages/initscripts/initscripts-1.0/openprotium/flashclean b/packages/initscripts/initscripts-1.0/openprotium/flashclean deleted file mode 100755 index d9a0e1b592..0000000000 --- a/packages/initscripts/initscripts-1.0/openprotium/flashclean +++ /dev/null @@ -1,60 +0,0 @@ -#! /bin/sh -# -# This is an init script for openprotium for storcenter -# -# This script cleansup after a successful uboot based reflash. -# A uboot reflash is done by changing the bootloader boot command -# to tftp a flash image and flash the firmware. However the boot command -# is never reset back to a regular boot. This way if the flash did -# not work the next power cycle will cause another reflash. A nice -# development recovery feature. So this boot script is the mechanism -# to reset the uboot boot command. Once booted and access it validated -# this script will issue command to reset the boot command. -# -# This command only has a start so stop is not necessary and should -# as late in the boot process as possible to ensure a successful reboot -# -# Copy it to /etc/init.d/flashclean and type -# update-rc.d flashclean start 99 5 -# -BOOTCMD="bootm FF800000" - -dmesg | grep StorCenter >/dev/null 2>&1 -if [ $? -ne 0 ]; then - exit 0 -fi - -printenv=/sbin/fw_printenv -setenv=/sbin/fw_setenv -test -x "$printenv" -a -x "$setenv" || exit 0 - -case "$1" in - start) - # Check to see if any work needs to be done - # Need to quote the right hand side, hence the ugly awk. - eval `$printenv bootcmd | awk -F= '{printf("%s=\"%s\"", $1, $2)}'` - if [ "$bootcmd" = "$BOOTCMD" ]; then - exit 0 - fi - - echo -n "Restoring u-Boot bootcmd" - $setenv bootcmd $BOOTCMD > /dev/null 2>&1 - eval `$printenv bootcmd | awk -F= '{printf("%s=\"%s\"", $1, $2)}'` - if [ "$bootcmd" != "$BOOTCMD" ]; then - echo " FAILED." - exit 1 - fi - echo "." - ;; - stop) - ;; - reload|force-reload) - ;; - restart) - ;; - *) - echo "Usage: /etc/init.d/flashclean {start|stop|reload|restart|force-reload}" - exit 1 -esac - -exit 0 |