summaryrefslogtreecommitdiff
path: root/recipes/u-boot/u-boot-1.1.4/u-boot-dht-walnut-df2.patch
diff options
context:
space:
mode:
authorDenys Dmytriyenko <denis@denix.org>2009-03-17 14:32:59 -0400
committerDenys Dmytriyenko <denis@denix.org>2009-03-17 14:32:59 -0400
commit709c4d66e0b107ca606941b988bad717c0b45d9b (patch)
tree37ee08b1eb308f3b2b6426d5793545c38396b838 /recipes/u-boot/u-boot-1.1.4/u-boot-dht-walnut-df2.patch
parentfa6cd5a3b993f16c27de4ff82b42684516d433ba (diff)
rename packages/ to recipes/ per earlier agreement
See links below for more details: http://thread.gmane.org/gmane.comp.handhelds.openembedded/21326 http://thread.gmane.org/gmane.comp.handhelds.openembedded/21816 Signed-off-by: Denys Dmytriyenko <denis@denix.org> Acked-by: Mike Westerhof <mwester@dls.net> Acked-by: Philip Balister <philip@balister.org> Acked-by: Khem Raj <raj.khem@gmail.com> Acked-by: Marcin Juszkiewicz <hrw@openembedded.org> Acked-by: Koen Kooi <koen@openembedded.org> Acked-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com>
Diffstat (limited to 'recipes/u-boot/u-boot-1.1.4/u-boot-dht-walnut-df2.patch')
-rw-r--r--recipes/u-boot/u-boot-1.1.4/u-boot-dht-walnut-df2.patch186
1 files changed, 186 insertions, 0 deletions
diff --git a/recipes/u-boot/u-boot-1.1.4/u-boot-dht-walnut-df2.patch b/recipes/u-boot/u-boot-1.1.4/u-boot-dht-walnut-df2.patch
new file mode 100644
index 0000000000..d919ea504e
--- /dev/null
+++ b/recipes/u-boot/u-boot-1.1.4/u-boot-dht-walnut-df2.patch
@@ -0,0 +1,186 @@
+diff --git a/board/amcc/walnut/walnut.c b/board/amcc/walnut/walnut.c
+index f1a96a6..86bcc65 100644
+--- a/board/amcc/walnut/walnut.c
++++ b/board/amcc/walnut/walnut.c
+@@ -73,7 +73,11 @@ int checkboard(void)
+ if (pvr == PVR_405GPR_RB) {
+ puts("Board: Sycamore - AMCC PPC405GPr Evaluation Board");
+ } else {
++#ifdef CONFIG_DHT_WALNUT
++ puts("Board: DHT Walnut");
++#else
+ puts("Board: Walnut - AMCC PPC405GP Evaluation Board");
++#endif
+ }
+
+ if (s != NULL) {
+diff --git a/cpu/ppc4xx/spd_sdram.c b/cpu/ppc4xx/spd_sdram.c
+index ebd5f39..1c4c4b1 100644
+--- a/cpu/ppc4xx/spd_sdram.c
++++ b/cpu/ppc4xx/spd_sdram.c
+@@ -398,19 +398,24 @@ long int spd_sdram(int(read_spd)(uint ad
+
+ tmp = SDRAM0_BXCR_SZ(bank_code) | SDRAM0_BXCR_AM(mode) | 1;
+ sdram0_b0cr = (bank_size * 0) | tmp;
+-#ifndef CONFIG_405EP /* not on PPC405EP */
++#if defined(CONFIG_405EP)
++ /* PPC405EP chip only supports two SDRAM banks */
++ if (bank_cnt > 1)
++ sdram0_b1cr = (bank_size * 1) | tmp;
++ if (bank_cnt > 2)
++ total_size = 2 * bank_size;
++#elif defined(CONFIG_DHT_WALNUT)
++ if (bank_cnt > 1) {
++ sdram0_b2cr = (bank_size * 1) | tmp;
++ total_size = 2 * bank_size;
++ }
++#else
+ if (bank_cnt > 1)
+ sdram0_b2cr = (bank_size * 1) | tmp;
+ if (bank_cnt > 2)
+ sdram0_b1cr = (bank_size * 2) | tmp;
+ if (bank_cnt > 3)
+ sdram0_b3cr = (bank_size * 3) | tmp;
+-#else
+- /* PPC405EP chip only supports two SDRAM banks */
+- if (bank_cnt > 1)
+- sdram0_b1cr = (bank_size * 1) | tmp;
+- if (bank_cnt > 2)
+- total_size = 2 * bank_size;
+ #endif
+
+ /*
+diff --git a/drivers/pci_auto.c b/drivers/pci_auto.c
+index 3302457..7f6d33a 100644
+--- a/drivers/pci_auto.c
++++ b/drivers/pci_auto.c
+@@ -296,10 +296,12 @@ int pciauto_config_device(struct pci_con
+
+ case PCI_CLASS_STORAGE_IDE:
+ pci_hose_read_config_byte(hose, dev, PCI_CLASS_PROG, &prg_iface);
++#ifndef CONFIG_DHT_WALNUT
+ if (!(prg_iface & PCIAUTO_IDE_MODE_MASK)) {
+ DEBUGF("PCI Autoconfig: Skipping legacy mode IDE controller\n");
+ return sub_bus;
+ }
++#endif
+
+ pciauto_setup_device(hose, dev, 6, hose->pci_mem, hose->pci_io);
+ break;
+diff --git a/include/configs/walnut.h b/include/configs/walnut.h
+index 1171ee5..df9e8ac 100644
+--- a/include/configs/walnut.h
++++ b/include/configs/walnut.h
+@@ -37,6 +37,7 @@
+ #define CONFIG_4xx 1 /* ...member of PPC4xx family */
+ #define CONFIG_WALNUT 1 /* ...on a WALNUT board */
+ /* ...and on a SYCAMORE board */
++#define CONFIG_DHT_WALNUT 1 /* Just like a walnut, but .... */
+
+ #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
+
+@@ -88,10 +89,36 @@
+ #define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
+
+ #define CONFIG_MII 1 /* MII PHY management */
++#ifdef CONFIG_DHT_WALNUT
++#define CONFIG_ETHADDR de:ad:be:ef:00:00
++#define CONFIG_ENV_OVERWRITE 1
++#define CONFIG_PHY_ADDR 9 /* PHY address */
++#else
+ #define CONFIG_PHY_ADDR 1 /* PHY address */
++#endif
+
+ #define CONFIG_RTC_DS174x 1 /* use DS1743 RTC in Walnut */
+
++#ifdef CONFIG_DHT_WALNUT
++#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
++ CFG_CMD_ASKENV | \
++ CFG_CMD_DATE | \
++ CFG_CMD_DHCP | \
++ CFG_CMD_DIAG | \
++ CFG_CMD_ELF | \
++ CFG_CMD_I2C | \
++ CFG_CMD_IRQ | \
++ CFG_CMD_MII | \
++ CFG_CMD_NET | \
++ CFG_CMD_NFS | \
++ CFG_CMD_PCI | \
++ CFG_CMD_PING | \
++ CFG_CMD_REGINFO | \
++ CFG_CMD_SDRAM | \
++ CFG_CMD_IDE | \
++ CFG_CMD_BEDBUG | \
++ CFG_CMD_SNTP )
++#else
+ #define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
+ CFG_CMD_ASKENV | \
+ CFG_CMD_DATE | \
+@@ -108,6 +135,7 @@
+ CFG_CMD_REGINFO | \
+ CFG_CMD_SDRAM | \
+ CFG_CMD_SNTP )
++#endif
+
+ /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+ #include <cmd_confdefs.h>
+@@ -151,7 +179,7 @@
+ #define CFG_BAUDRATE_TABLE \
+ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
+
+-#define CFG_LOAD_ADDR 0x100000 /* default load address */
++#define CFG_LOAD_ADDR 0x200000 /* default load address */
+ #define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */
+
+ #define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+@@ -198,6 +226,50 @@
+ #define CFG_PCI_PTM2MS 0x00000000 /* disabled */
+ #define CFG_PCI_PTM2PCI 0x04000000 /* Host: use this pci address */
+
++#ifdef CONFIG_DHT_WALNUT
++/***********************************************************************
++ * External peripheral base address
++ ***********************************************************************/
++#define CFG_ISA_IO_BASE_ADDRESS 0xE8000000
++
++/************************************************************
++ * IDE/ATA stuff
++ ************************************************************/
++#define CFG_IDE_MAXBUS 1 /* max. 2 IDE busses */
++#define CFG_IDE_MAXDEVICE (CFG_IDE_MAXBUS*2) /* max. 2 per IDE bus */
++
++#define CFG_ATA_BASE_ADDR CFG_ISA_IO_BASE_ADDRESS /* base address */
++#define CFG_ATA_IDE0_OFFSET 0x01F0 /* ide0 offset */
++#define CFG_ATA_DATA_OFFSET 0 /* data reg offset */
++#define CFG_ATA_REG_OFFSET 0 /* reg offset */
++#define CFG_ATA_ALT_OFFSET 0x200 /* alternate register offset */
++
++#undef CONFIG_IDE_8xx_DIRECT /* no pcmcia interface required */
++#undef CONFIG_IDE_LED /* no led for ide supported */
++#undef CONFIG_IDE_RESET /* no reset for ide supported */
++
++#define CONFIG_LBA48 1
++#define CONFIG_MAC_PARTITION 1
++#define CONFIG_DOS_PARTITION 1
++#define CONFIG_ISO_PARTITION 1
++
++#define CONFIG_SUPPORT_VFAT
++
++/************************************************************
++ * ATAPI support (experimental)
++ ************************************************************/
++#define CONFIG_ATAPI /* enable ATAPI Support */
++
++/************************************************************
++ * SCSI support (experimental) only SYM53C8xx supported
++ ************************************************************/
++#define CONFIG_SCSI_SYM53C8XX
++#define CFG_SCSI_MAX_LUN 8 /* number of supported LUNs */
++#define CFG_SCSI_MAX_SCSI_ID 7 /* maximum SCSI ID (0..6) */
++#define CFG_SCSI_MAX_DEVICE CFG_SCSI_MAX_SCSI_ID * CFG_SCSI_MAX_LUN /* maximum Target devices */
++#define CFG_SCSI_SPIN_UP_TIME 2
++#endif
++
+ /*-----------------------------------------------------------------------
+ * Start addresses for the final memory configuration
+ * (Set up by the startup code)