From 709c4d66e0b107ca606941b988bad717c0b45d9b Mon Sep 17 00:00:00 2001 From: Denys Dmytriyenko Date: Tue, 17 Mar 2009 14:32:59 -0400 Subject: rename packages/ to recipes/ per earlier agreement See links below for more details: http://thread.gmane.org/gmane.comp.handhelds.openembedded/21326 http://thread.gmane.org/gmane.comp.handhelds.openembedded/21816 Signed-off-by: Denys Dmytriyenko Acked-by: Mike Westerhof Acked-by: Philip Balister Acked-by: Khem Raj Acked-by: Marcin Juszkiewicz Acked-by: Koen Kooi Acked-by: Frans Meulenbroeks --- .../u-boot-1.1.4/u-boot-dht-walnut-df2.patch | 186 +++++++++++++++++++++ 1 file changed, 186 insertions(+) create mode 100644 recipes/u-boot/u-boot-1.1.4/u-boot-dht-walnut-df2.patch (limited to 'recipes/u-boot/u-boot-1.1.4/u-boot-dht-walnut-df2.patch') diff --git a/recipes/u-boot/u-boot-1.1.4/u-boot-dht-walnut-df2.patch b/recipes/u-boot/u-boot-1.1.4/u-boot-dht-walnut-df2.patch new file mode 100644 index 0000000000..d919ea504e --- /dev/null +++ b/recipes/u-boot/u-boot-1.1.4/u-boot-dht-walnut-df2.patch @@ -0,0 +1,186 @@ +diff --git a/board/amcc/walnut/walnut.c b/board/amcc/walnut/walnut.c +index f1a96a6..86bcc65 100644 +--- a/board/amcc/walnut/walnut.c ++++ b/board/amcc/walnut/walnut.c +@@ -73,7 +73,11 @@ int checkboard(void) + if (pvr == PVR_405GPR_RB) { + puts("Board: Sycamore - AMCC PPC405GPr Evaluation Board"); + } else { ++#ifdef CONFIG_DHT_WALNUT ++ puts("Board: DHT Walnut"); ++#else + puts("Board: Walnut - AMCC PPC405GP Evaluation Board"); ++#endif + } + + if (s != NULL) { +diff --git a/cpu/ppc4xx/spd_sdram.c b/cpu/ppc4xx/spd_sdram.c +index ebd5f39..1c4c4b1 100644 +--- a/cpu/ppc4xx/spd_sdram.c ++++ b/cpu/ppc4xx/spd_sdram.c +@@ -398,19 +398,24 @@ long int spd_sdram(int(read_spd)(uint ad + + tmp = SDRAM0_BXCR_SZ(bank_code) | SDRAM0_BXCR_AM(mode) | 1; + sdram0_b0cr = (bank_size * 0) | tmp; +-#ifndef CONFIG_405EP /* not on PPC405EP */ ++#if defined(CONFIG_405EP) ++ /* PPC405EP chip only supports two SDRAM banks */ ++ if (bank_cnt > 1) ++ sdram0_b1cr = (bank_size * 1) | tmp; ++ if (bank_cnt > 2) ++ total_size = 2 * bank_size; ++#elif defined(CONFIG_DHT_WALNUT) ++ if (bank_cnt > 1) { ++ sdram0_b2cr = (bank_size * 1) | tmp; ++ total_size = 2 * bank_size; ++ } ++#else + if (bank_cnt > 1) + sdram0_b2cr = (bank_size * 1) | tmp; + if (bank_cnt > 2) + sdram0_b1cr = (bank_size * 2) | tmp; + if (bank_cnt > 3) + sdram0_b3cr = (bank_size * 3) | tmp; +-#else +- /* PPC405EP chip only supports two SDRAM banks */ +- if (bank_cnt > 1) +- sdram0_b1cr = (bank_size * 1) | tmp; +- if (bank_cnt > 2) +- total_size = 2 * bank_size; + #endif + + /* +diff --git a/drivers/pci_auto.c b/drivers/pci_auto.c +index 3302457..7f6d33a 100644 +--- a/drivers/pci_auto.c ++++ b/drivers/pci_auto.c +@@ -296,10 +296,12 @@ int pciauto_config_device(struct pci_con + + case PCI_CLASS_STORAGE_IDE: + pci_hose_read_config_byte(hose, dev, PCI_CLASS_PROG, &prg_iface); ++#ifndef CONFIG_DHT_WALNUT + if (!(prg_iface & PCIAUTO_IDE_MODE_MASK)) { + DEBUGF("PCI Autoconfig: Skipping legacy mode IDE controller\n"); + return sub_bus; + } ++#endif + + pciauto_setup_device(hose, dev, 6, hose->pci_mem, hose->pci_io); + break; +diff --git a/include/configs/walnut.h b/include/configs/walnut.h +index 1171ee5..df9e8ac 100644 +--- a/include/configs/walnut.h ++++ b/include/configs/walnut.h +@@ -37,6 +37,7 @@ + #define CONFIG_4xx 1 /* ...member of PPC4xx family */ + #define CONFIG_WALNUT 1 /* ...on a WALNUT board */ + /* ...and on a SYCAMORE board */ ++#define CONFIG_DHT_WALNUT 1 /* Just like a walnut, but .... */ + + #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ + +@@ -88,10 +89,36 @@ + #define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ + + #define CONFIG_MII 1 /* MII PHY management */ ++#ifdef CONFIG_DHT_WALNUT ++#define CONFIG_ETHADDR de:ad:be:ef:00:00 ++#define CONFIG_ENV_OVERWRITE 1 ++#define CONFIG_PHY_ADDR 9 /* PHY address */ ++#else + #define CONFIG_PHY_ADDR 1 /* PHY address */ ++#endif + + #define CONFIG_RTC_DS174x 1 /* use DS1743 RTC in Walnut */ + ++#ifdef CONFIG_DHT_WALNUT ++#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ ++ CFG_CMD_ASKENV | \ ++ CFG_CMD_DATE | \ ++ CFG_CMD_DHCP | \ ++ CFG_CMD_DIAG | \ ++ CFG_CMD_ELF | \ ++ CFG_CMD_I2C | \ ++ CFG_CMD_IRQ | \ ++ CFG_CMD_MII | \ ++ CFG_CMD_NET | \ ++ CFG_CMD_NFS | \ ++ CFG_CMD_PCI | \ ++ CFG_CMD_PING | \ ++ CFG_CMD_REGINFO | \ ++ CFG_CMD_SDRAM | \ ++ CFG_CMD_IDE | \ ++ CFG_CMD_BEDBUG | \ ++ CFG_CMD_SNTP ) ++#else + #define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ + CFG_CMD_ASKENV | \ + CFG_CMD_DATE | \ +@@ -108,6 +135,7 @@ + CFG_CMD_REGINFO | \ + CFG_CMD_SDRAM | \ + CFG_CMD_SNTP ) ++#endif + + /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ + #include +@@ -151,7 +179,7 @@ + #define CFG_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400} + +-#define CFG_LOAD_ADDR 0x100000 /* default load address */ ++#define CFG_LOAD_ADDR 0x200000 /* default load address */ + #define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */ + + #define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ +@@ -198,6 +226,50 @@ + #define CFG_PCI_PTM2MS 0x00000000 /* disabled */ + #define CFG_PCI_PTM2PCI 0x04000000 /* Host: use this pci address */ + ++#ifdef CONFIG_DHT_WALNUT ++/*********************************************************************** ++ * External peripheral base address ++ ***********************************************************************/ ++#define CFG_ISA_IO_BASE_ADDRESS 0xE8000000 ++ ++/************************************************************ ++ * IDE/ATA stuff ++ ************************************************************/ ++#define CFG_IDE_MAXBUS 1 /* max. 2 IDE busses */ ++#define CFG_IDE_MAXDEVICE (CFG_IDE_MAXBUS*2) /* max. 2 per IDE bus */ ++ ++#define CFG_ATA_BASE_ADDR CFG_ISA_IO_BASE_ADDRESS /* base address */ ++#define CFG_ATA_IDE0_OFFSET 0x01F0 /* ide0 offset */ ++#define CFG_ATA_DATA_OFFSET 0 /* data reg offset */ ++#define CFG_ATA_REG_OFFSET 0 /* reg offset */ ++#define CFG_ATA_ALT_OFFSET 0x200 /* alternate register offset */ ++ ++#undef CONFIG_IDE_8xx_DIRECT /* no pcmcia interface required */ ++#undef CONFIG_IDE_LED /* no led for ide supported */ ++#undef CONFIG_IDE_RESET /* no reset for ide supported */ ++ ++#define CONFIG_LBA48 1 ++#define CONFIG_MAC_PARTITION 1 ++#define CONFIG_DOS_PARTITION 1 ++#define CONFIG_ISO_PARTITION 1 ++ ++#define CONFIG_SUPPORT_VFAT ++ ++/************************************************************ ++ * ATAPI support (experimental) ++ ************************************************************/ ++#define CONFIG_ATAPI /* enable ATAPI Support */ ++ ++/************************************************************ ++ * SCSI support (experimental) only SYM53C8xx supported ++ ************************************************************/ ++#define CONFIG_SCSI_SYM53C8XX ++#define CFG_SCSI_MAX_LUN 8 /* number of supported LUNs */ ++#define CFG_SCSI_MAX_SCSI_ID 7 /* maximum SCSI ID (0..6) */ ++#define CFG_SCSI_MAX_DEVICE CFG_SCSI_MAX_SCSI_ID * CFG_SCSI_MAX_LUN /* maximum Target devices */ ++#define CFG_SCSI_SPIN_UP_TIME 2 ++#endif ++ + /*----------------------------------------------------------------------- + * Start addresses for the final memory configuration + * (Set up by the startup code) -- cgit v1.2.3