summaryrefslogtreecommitdiff
path: root/recipes/privoxy
diff options
context:
space:
mode:
authorDenys Dmytriyenko <denis@denix.org>2009-03-17 14:32:59 -0400
committerDenys Dmytriyenko <denis@denix.org>2009-03-17 14:32:59 -0400
commit709c4d66e0b107ca606941b988bad717c0b45d9b (patch)
tree37ee08b1eb308f3b2b6426d5793545c38396b838 /recipes/privoxy
parentfa6cd5a3b993f16c27de4ff82b42684516d433ba (diff)
rename packages/ to recipes/ per earlier agreement
See links below for more details: http://thread.gmane.org/gmane.comp.handhelds.openembedded/21326 http://thread.gmane.org/gmane.comp.handhelds.openembedded/21816 Signed-off-by: Denys Dmytriyenko <denis@denix.org> Acked-by: Mike Westerhof <mwester@dls.net> Acked-by: Philip Balister <philip@balister.org> Acked-by: Khem Raj <raj.khem@gmail.com> Acked-by: Marcin Juszkiewicz <hrw@openembedded.org> Acked-by: Koen Kooi <koen@openembedded.org> Acked-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com>
Diffstat (limited to 'recipes/privoxy')
-rw-r--r--recipes/privoxy/files/privoxy.conf1088
-rwxr-xr-xrecipes/privoxy/files/privoxy.init49
-rw-r--r--recipes/privoxy/privoxy_3.0.3.bb63
3 files changed, 1200 insertions, 0 deletions
diff --git a/recipes/privoxy/files/privoxy.conf b/recipes/privoxy/files/privoxy.conf
new file mode 100644
index 0000000000..7e1a1f891c
--- /dev/null
+++ b/recipes/privoxy/files/privoxy.conf
@@ -0,0 +1,1088 @@
+# Sample Configuration File for Privoxy
+#
+# Copyright (C) 2001-2004 Privoxy Developers http://privoxy.org
+#
+#
+# Modified by Bastian Ballmann <balle@chaostal.de> for use
+# with Tor and to provide maximum privacy
+#
+# $Id: config,v $
+#
+####################################################################
+# #
+# Table of Contents #
+# #
+# I. INTRODUCTION #
+# II. FORMAT OF THE CONFIGURATION FILE #
+# #
+# 1. CONFIGURATION AND LOG FILE LOCATIONS #
+# 2. LOCAL SET-UP DOCUMENTATION #
+# 3. DEBUGGING #
+# 4. ACCESS CONTROL AND SECURITY #
+# 5. FORWARDING #
+# 6. WINDOWS GUI OPTIONS #
+# #
+####################################################################
+#
+#
+# I. INTRODUCTION
+# ===============
+#
+# This file holds the Privoxy configuration. If you modify this file,
+# you will need to send a couple of requests to the proxy before any
+# changes take effect.
+#
+# When starting Privoxy on Unix systems, give the name of this file as
+# an argument. On Windows systems, Privoxy will look for this file
+# with the name 'config.txt' in the same directory where Privoxy
+# is installed.
+#
+#
+# II. FORMAT OF THE CONFIGURATION FILE
+# ====================================
+#
+# Configuration lines consist of an initial keyword followed by a
+# list of values, all separated by whitespace (any number of spaces
+# or tabs). For example,
+#
+# actionsfile default.action
+#
+# Indicates that the actionsfile is named 'default.action'.
+#
+# The '#' indicates a comment. Any part of a line following a '#'
+# is ignored, except if the '#' is preceded by a '\'.
+#
+# Thus, by placing a # at the start of an existing configuration line,
+# you can make it a comment and it will be treated as if it weren't
+# there. This is called "commenting out" an option and can be useful.
+#
+# Note that commenting out and option and leaving it at its default
+# are two completely different things! Most options behave very
+# differently when unset. See the the "Effect if unset" explanation
+# in each option's description for details.
+#
+# Long lines can be continued on the next line by using a `\' as the
+# last character.
+#
+
+#
+# 1. CONFIGURATION AND LOG FILE LOCATIONS
+# =======================================
+#
+# Privoxy can (and normally does) use a number of other files for
+# additional configuration, help and logging. This section of the
+# configuration file tells Privoxy where to find those other files.
+#
+# The user running Privoxy, must have read permission for all
+# configuration files, and write permission to any files that would
+# be modified, such as log files and actions files.
+#
+
+#
+# 1.1. confdir
+# ============
+#
+# Specifies:
+#
+# The directory where the other configuration files are located
+#
+# Type of value:
+#
+# Path name
+#
+# Default value:
+#
+# /etc/privoxy (Unix) or Privoxy installation dir (Windows)
+#
+# Effect if unset:
+#
+# Mandatory
+#
+# Notes:
+#
+# No trailing "/", please
+#
+# When development goes modular and multi-user, the blocker,
+# filter, and per-user config will be stored in subdirectories of
+# "confdir". For now, the configuration directory structure is
+# flat, except for confdir/templates, where the HTML templates
+# for CGI output reside (e.g. Privoxy's 404 error page).
+#
+confdir /etc/privoxy
+
+#
+# 1.2. logdir
+# ===========
+#
+# Specifies:
+#
+# The directory where all logging takes place (i.e. where logfile
+# and jarfile are located)
+#
+# Type of value:
+#
+# Path name
+#
+# Default value:
+#
+# /var/log/privoxy (Unix) or Privoxy installation dir (Windows)
+#
+# Effect if unset:
+#
+# Mandatory
+#
+# Notes:
+#
+# No trailing "/", please
+#
+#logdir /var/log/privoxy
+
+# We dont want logging
+logdir
+
+#
+# 1.3. actionsfile
+# ================
+#
+# Specifies:
+#
+# The actions file(s) to use
+#
+# Type of value:
+#
+# File name, relative to confdir, without the .action suffix
+#
+# Default values:
+#
+# standard # Internal purposes, no editing recommended
+#
+# default # Main actions file
+#
+# user # User customizations
+#
+# Effect if unset:
+#
+# No actions are taken at all. Simple neutral proxying.
+#
+# Notes:
+#
+# Multiple actionsfile lines are permitted, and are in fact
+# recommended!
+#
+# The default values include standard.action, which is used
+# for internal purposes and should be loaded, default.action,
+# which is the "main" actions file maintained by the developers,
+# and user.action, where you can make your personal additions.
+#
+# Actions files are where all the per site and per URL
+# configuration is done for ad blocking, cookie management,
+# privacy considerations, etc. There is no point in using Privoxy
+# without at least one actions file.
+#
+actionsfile standard # Internal purpose, recommended
+actionsfile default # Main actions file
+actionsfile user # User customizations
+
+#
+# 1.4. filterfile
+# ===============
+#
+# Specifies:
+#
+# The filter file to use
+#
+# Type of value:
+#
+# File name, relative to confdir
+#
+# Default value:
+#
+# default.filter (Unix) or default.filter.txt (Windows)
+#
+# Effect if unset:
+#
+# No textual content filtering takes place, i.e. all +filter{name}
+# actions in the actions files are turned neutral.
+#
+# Notes:
+#
+# The filter file contains content modification rules that use
+# regular expressions. These rules permit powerful changes on the
+# content of Web pages, e.g., you could disable your favorite
+# JavaScript annoyances, re-write the actual displayed text,
+# or just have some fun replacing "Microsoft" with "MicroSuck"
+# wherever it appears on a Web page.
+#
+# The +filter{name} actions rely on the relevant filter (name)
+# to be defined in the filter file!
+#
+# A pre-defined filter file called default.filter that contains
+# a bunch of handy filters for common problems is included in the
+# distribution. See the section on the filter action for a list.
+#
+filterfile default.filter
+
+#
+# 1.5. logfile
+# ============
+#
+# Specifies:
+#
+# The log file to use
+#
+# Type of value:
+#
+# File name, relative to logdir
+#
+# Default value:
+#
+# logfile (Unix) or privoxy.log (Windows)
+#
+# Effect if unset:
+#
+# No log file is used, all log messages go to the console (STDERR).
+#
+# Notes:
+#
+# The windows version will additionally log to the console.
+#
+# The logfile is where all logging and error messages are
+# written. The level of detail and number of messages are set with
+# the debug option (see below). The logfile can be useful for
+# tracking down a problem with Privoxy (e.g., it's not blocking
+# an ad you think it should block) but in most cases you probably
+# will never look at it.
+#
+# Your logfile will grow indefinitely, and you will probably
+# want to periodically remove it. On Unix systems, you can do
+# this with a cron job (see "man cron"). For Red Hat, a logrotate
+# script has been included.
+#
+# On SuSE Linux systems, you can place a line like
+# "/var/log/privoxy.* +1024k 644 nobody.nogroup" in /etc/logfiles,
+# with the effect that cron.daily will automatically archive,
+# gzip, and empty the log, when it exceeds 1M size.
+#
+# Any log files must be writable by whatever user Privoxy is
+# being run as (default on UNIX, user id is "privoxy").
+#
+#logfile logfile
+
+# We dont want logging
+logfile
+
+#
+# 1.6. jarfile
+# ============
+#
+# Specifies:
+#
+# The file to store intercepted cookies in
+#
+# Type of value:
+#
+# File name, relative to logdir
+#
+# Default value:
+#
+# jarfile (Unix) or privoxy.jar (Windows)
+#
+# Effect if unset:
+#
+# Intercepted cookies are not stored at all.
+#
+# Notes:
+#
+# The jarfile may grow to ridiculous sizes over time.
+#
+#jarfile jarfile
+jarfile
+
+#
+# 1.7. trustfile
+# ==============
+#
+# Specifies:
+#
+# The trust file to use
+#
+# Type of value:
+#
+# File name, relative to confdir
+#
+# Default value:
+#
+# Unset (commented out). When activated: trust (Unix) or trust.txt
+# (Windows)
+#
+# Effect if unset:
+#
+# The entire trust mechanism is turned off.
+#
+# Notes:
+#
+# The trust mechanism is an experimental feature for building
+# white-lists and should be used with care. It is NOT recommended
+# for the casual user.
+#
+# If you specify a trust file, Privoxy will only allow access to
+# sites that are specified in the trustfile. Sites can be listed
+# in one of two ways:
+#
+# Prepending a ~ character limits access to this site only (and
+# any sub-paths within this site), e.g. ~www.example.com.
+#
+# Or, you can designate sites as trusted referrers, by prepending
+# the name with a + character. The effect is that access to
+# untrusted sites will be granted -- but only if a link from this
+# trusted referrer was used. The link target will then be added
+# to the "trustfile" so that future, direct accesses will be
+# granted. Sites added via this mechanism do not become trusted
+# referrers themselves (i.e. they are added with a ~ designation).
+#
+# If you use the + operator in the trust file, it may grow
+# considerably over time.
+#
+# It is recommended that Privoxy be compiled with the
+# --disable-force, --disable-toggle and --disable-editor options,
+# if this feature is to be used.
+#
+# Possible applications include limiting Internet access for
+# children.
+#
+#trustfile trust
+
+#
+# 2. LOCAL SET-UP DOCUMENTATION
+# =============================
+#
+# If you intend to operate Privoxy for more users than just yourself,
+# it might be a good idea to let them know how to reach you, what
+# you block and why you do that, your policies, etc.
+#
+
+#
+# 2.1. user-manual
+# ================
+#
+# Specifies:
+#
+# Location of the Privoxy User Manual.
+#
+# Type of value:
+#
+# A fully qualified URI
+#
+# Default value:
+#
+# Unset
+#
+# Effect if unset:
+#
+# http://www.privoxy.org/version/user-manual/ will be used,
+# where version is the Privoxy version.
+#
+# Notes:
+#
+# The User Manual URI is used for help links from some of the
+# internal CGI pages. The manual itself is normally packaged
+# with the binary distributions, so you probably want to set this
+# to a locally installed copy. For multi-user setups, you could
+# provide a copy on a local webserver for all your users and use
+# the corresponding URL here.
+#
+# Examples:
+#
+# Unix, in local filesystem:
+#
+# user-manual file:///usr/share/doc/privoxy-3.0.1/user-manual/index.html
+#
+# Windows, in local filesystem, must use forward slash notation,
+# and %20 to denote spaces in path names:
+#
+# user-manual file:///c:/some%20dir/privoxy/user-manual/index.html
+#
+# Windows, UNC notation (forward slashes required again):
+#
+# user-manual file://///some-server/some-path/privoxy/user-manual/index.html
+#
+# Any platform, on local webserver (called "local-webserver"):
+#
+# user-manual http://local-webserver/privoxy-user-manual/
+#
+# WARNING!!!
+#
+# If set, this option should be the first option in the config
+# file, because it is used while the config file is being read.
+#
+user-manual /usr/share/doc/privoxy/user-manual
+
+#
+# 2.2. trust-info-url
+# ===================
+#
+# Specifies:
+#
+# A URL to be displayed in the error page that users will see if
+# access to an untrusted page is denied.
+#
+# Type of value:
+#
+# URL
+#
+# Default value:
+#
+# Two example URL are provided
+#
+# Effect if unset:
+#
+# No links are displayed on the "untrusted" error page.
+#
+# Notes:
+#
+# The value of this option only matters if the experimental trust
+# mechanism has been activated. (See trustfile above.)
+#
+# If you use the trust mechanism, it is a good idea to write
+# up some on-line documentation about your trust policy and to
+# specify the URL(s) here. Use multiple times for multiple URLs.
+#
+# The URL(s) should be added to the trustfile as well, so users
+# don't end up locked out from the information on why they were
+# locked out in the first place!
+#
+#trust-info-url http://www.example.com/why_we_block.html
+#trust-info-url http://www.example.com/what_we_allow.html
+
+#
+# 2.3. admin-address
+# ==================
+#
+# Specifies:
+#
+# An email address to reach the proxy administrator.
+#
+# Type of value:
+#
+# Email address
+#
+# Default value:
+#
+# Unset
+#
+# Effect if unset:
+#
+# No email address is displayed on error pages and the CGI user
+# interface.
+#
+# Notes:
+#
+# If both admin-address and proxy-info-url are unset, the whole
+# "Local Privoxy Support" box on all generated pages will not
+# be shown.
+#
+#admin-address privoxy-admin@example.com
+
+#
+# 2.4. proxy-info-url
+# ===================
+#
+# Specifies:
+#
+# A URL to documentation about the local Privoxy setup,
+# configuration or policies.
+#
+# Type of value:
+#
+# URL
+#
+# Default value:
+#
+# Unset
+#
+# Effect if unset:
+#
+# No link to local documentation is displayed on error pages and
+# the CGI user interface.
+#
+# Notes:
+#
+# If both admin-address and proxy-info-url are unset, the whole
+# "Local Privoxy Support" box on all generated pages will not
+# be shown.
+#
+# This URL shouldn't be blocked ;-)
+#
+#proxy-info-url http://www.example.com/proxy-service.html
+
+#
+# 3. DEBUGGING
+# ============
+#
+# These options are mainly useful when tracing a problem. Note that
+# you might also want to invoke Privoxy with the --no-daemon command
+# line option when debugging.
+#
+
+#
+# 3.1. debug
+# ==========
+#
+# Specifies:
+#
+# Key values that determine what information gets logged to
+# the logfile.
+#
+# Type of value:
+#
+# Integer values
+#
+# Default value:
+#
+# 12289 (i.e.: URLs plus informational and warning messages)
+#
+# Effect if unset:
+#
+# Nothing gets logged.
+#
+# Notes:
+#
+# The available debug levels are:
+#
+# debug 1 # show each GET/POST/CONNECT request
+# debug 2 # show each connection status
+# debug 4 # show I/O status
+# debug 8 # show header parsing
+# debug 16 # log all data into the logfile
+# debug 32 # debug force feature
+# debug 64 # debug regular expression filter
+# debug 128 # debug fast redirects
+# debug 256 # debug GIF de-animation
+# debug 512 # Common Log Format
+# debug 1024 # debug kill pop-ups
+# debug 2048 # CGI user interface
+# debug 4096 # Startup banner and warnings.
+# debug 8192 # Non-fatal errors
+#
+# To select multiple debug levels, you can either add them or
+# use multiple debug lines.
+#
+# A debug level of 1 is informative because it will show you each
+# request as it happens. 1, 4096 and 8192 are highly recommended
+# so that you will notice when things go wrong. The other levels
+# are probably only of interest if you are hunting down a specific
+# problem. They can produce a hell of an output (especially 16).
+#
+# The reporting of fatal errors (i.e. ones which crash Privoxy)
+# is always on and cannot be disabled.
+#
+# If you want to use CLF (Common Log Format), you should set
+# "debug 512" ONLY and not enable anything else.
+#
+#debug 1 # show each GET/POST/CONNECT request
+#debug 4096 # Startup banner and warnings
+debug 8192 # Errors - *we highly recommended enabling this*
+
+#
+# 3.2. single-threaded
+# ====================
+#
+# Specifies:
+#
+# Whether to run only one server thread
+#
+# Type of value:
+#
+# None
+#
+# Default value:
+#
+# Unset
+#
+# Effect if unset:
+#
+# Multi-threaded (or, where unavailable: forked) operation,
+# i.e. the ability to serve multiple requests simultaneously.
+#
+# Notes:
+#
+# This option is only there for debug purposes and you should
+# never need to use it. It will drastically reduce performance.
+#
+#single-threaded
+
+#
+# 4. ACCESS CONTROL AND SECURITY
+# ==============================
+#
+# This section of the config file controls the security-relevant
+# aspects of Privoxy's configuration.
+#
+
+#
+# 4.1. listen-address
+# ===================
+#
+# Specifies:
+#
+# The IP address and TCP port on which Privoxy will listen for
+# client requests.
+#
+# Type of value:
+#
+# [IP-Address]:Port
+#
+# Default value:
+#
+# 127.0.0.1:8118
+#
+# Effect if unset:
+#
+# Bind to 127.0.0.1 (localhost), port 8118. This is suitable and
+# recommended for home users who run Privoxy on the same machine
+# as their browser.
+#
+# Notes:
+#
+# You will need to configure your browser(s) to this proxy address
+# and port.
+#
+# If you already have another service running on port 8118, or
+# if you want to serve requests from other machines (e.g. on your
+# local network) as well, you will need to override the default.
+#
+# If you leave out the IP address, Privoxy will bind to all
+# interfaces (addresses) on your machine and may become reachable
+# from the Internet. In that case, consider using access control
+# lists (ACL's, see below), and/or a firewall.
+#
+# If you open Privoxy to untrusted users, you will also want
+# to turn off the enable-edit-actions and enable-remote-toggle
+# options!
+#
+# Example:
+#
+# Suppose you are running Privoxy on a machine which has the
+# address 192.168.0.1 on your local private network (192.168.0.0)
+# and has another outside connection with a different address. You
+# want it to serve requests from inside only:
+#
+# listen-address 192.168.0.1:8118
+#
+listen-address 127.0.0.1:8118
+
+#
+# 4.2. toggle
+# ===========
+#
+# Specifies:
+#
+# Initial state of "toggle" status
+#
+# Type of value:
+#
+# 1 or 0
+#
+# Default value:
+#
+# 1
+#
+# Effect if unset:
+#
+# Act as if toggled on
+#
+# Notes:
+#
+# If set to 0, Privoxy will start in "toggled off" mode,
+# i.e. behave like a normal, content-neutral proxy where all ad
+# blocking, filtering, etc are disabled. See enable-remote-toggle
+# below. This is not really useful anymore, since toggling is
+# much easier via the web interface than via editing the conf file.
+#
+# The windows version will only display the toggle icon in the
+# system tray if this option is present.
+#
+toggle 1
+
+#
+# 4.3. enable-remote-toggle
+# =========================
+#
+# Specifies:
+#
+# Whether or not the web-based toggle feature may be used
+#
+# Type of value:
+#
+# 0 or 1
+#
+# Default value:
+#
+# 1
+#
+# Effect if unset:
+#
+# The web-based toggle feature is disabled.
+#
+# Notes:
+#
+# When toggled off, Privoxy acts like a normal, content-neutral
+# proxy, i.e. it acts as if none of the actions applied to
+# any URL.
+#
+# For the time being, access to the toggle feature can not be
+# controlled separately by "ACLs" or HTTP authentication, so that
+# everybody who can access Privoxy (see "ACLs" and listen-address
+# above) can toggle it for all users. So this option is not
+# recommended for multi-user environments with untrusted users.
+#
+# Note that you must have compiled Privoxy with support for this
+# feature, otherwise this option has no effect.
+#
+enable-remote-toggle 0
+
+#
+# 4.4. enable-edit-actions
+# ========================
+#
+# Specifies:
+#
+# Whether or not the web-based actions file editor may be used
+#
+# Type of value:
+#
+# 0 or 1
+#
+# Default value:
+#
+# 1
+#
+# Effect if unset:
+#
+# The web-based actions file editor is disabled.
+#
+# Notes:
+#
+# For the time being, access to the editor can not be controlled
+# separately by "ACLs" or HTTP authentication, so that everybody
+# who can access Privoxy (see "ACLs" and listen-address above)
+# can modify its configuration for all users. So this option is
+# not recommended for multi-user environments with untrusted users.
+#
+# Note that you must have compiled Privoxy with support for this
+# feature, otherwise this option has no effect.
+#
+enable-edit-actions 0
+
+#
+# 4.5. ACLs: permit-access and deny-access
+# ========================================
+#
+# Specifies:
+#
+# Who can access what.
+#
+# Type of value:
+#
+# src_addr[/src_masklen] [dst_addr[/dst_masklen]]
+#
+# Where src_addr and dst_addr are IP addresses in dotted decimal
+# notation or valid DNS names, and src_masklen and dst_masklen are
+# subnet masks in CIDR notation, i.e. integer values from 2 to 30
+# representing the length (in bits) of the network address. The
+# masks and the whole destination part are optional.
+#
+# Default value:
+#
+# Unset
+#
+# Effect if unset:
+#
+# Don't restrict access further than implied by listen-address
+#
+# Notes:
+#
+# Access controls are included at the request of ISPs and systems
+# administrators, and are not usually needed by individual
+# users. For a typical home user, it will normally suffice to
+# ensure that Privoxy only listens on the localhost (127.0.0.1)
+# or internal (home) network address by means of the listen-address
+# option.
+#
+# Please see the warnings in the FAQ that this proxy is not
+# intended to be a substitute for a firewall or to encourage
+# anyone to defer addressing basic security weaknesses.
+#
+# Multiple ACL lines are OK. If any ACLs are specified, then
+# the Privoxy talks only to IP addresses that match at least one
+# permit-access line and don't match any subsequent deny-access
+# line. In other words, the last match wins, with the default
+# being deny-access.
+#
+# If Privoxy is using a forwarder (see forward below) for a
+# particular destination URL, the dst_addr that is examined is
+# the address of the forwarder and NOT the address of the ultimate
+# target. This is necessary because it may be impossible for the
+# local Privoxy to determine the IP address of the ultimate target
+# (that's often what gateways are used for).
+#
+# You should prefer using IP addresses over DNS names, because
+# the address lookups take time. All DNS names must resolve! You
+# can not use domain patterns like "*.org" or partial domain
+# names. If a DNS name resolves to multiple IP addresses, only
+# the first one is used.
+#
+# Denying access to particular sites by ACL may have undesired
+# side effects if the site in question is hosted on a machine
+# which also hosts other sites.
+#
+# Examples:
+#
+# Explicitly define the default behavior if no ACL and
+# listen-address are set: "localhost" is OK. The absence of a
+# dst_addr implies that all destination addresses are OK:
+#
+# permit-access localhost
+#
+# Allow any host on the same class C subnet as www.privoxy.org
+# access to nothing but www.example.com:
+#
+# permit-access www.privoxy.org/24 www.example.com/32
+#
+# Allow access from any host on the 26-bit subnet 192.168.45.64
+# to anywhere, with the exception that 192.168.45.73 may not
+# access www.dirty-stuff.example.com:
+#
+# permit-access 192.168.45.64/26
+# deny-access 192.168.45.73 www.dirty-stuff.example.com
+#
+
+#
+# 4.6. buffer-limit
+# =================
+#
+# Specifies:
+#
+# Maximum size of the buffer for content filtering.
+#
+# Type of value:
+#
+# Size in Kbytes
+#
+# Default value:
+#
+# 4096
+#
+# Effect if unset:
+#
+# Use a 4MB (4096 KB) limit.
+#
+# Notes:
+#
+# For content filtering, i.e. the +filter and +deanimate-gif
+# actions, it is necessary that Privoxy buffers the entire document
+# body. This can be potentially dangerous, since a server could
+# just keep sending data indefinitely and wait for your RAM to
+# exhaust -- with nasty consequences. Hence this option.
+#
+# When a document buffer size reaches the buffer-limit, it is
+# flushed to the client unfiltered and no further attempt to filter
+# the rest of the document is made. Remember that there may be
+# multiple threads running, which might require up to buffer-limit
+# Kbytes each, unless you have enabled "single-threaded" above.
+#
+buffer-limit 4096
+
+#
+# 5. FORWARDING
+# =============
+#
+# This feature allows routing of HTTP requests through a chain
+# of multiple proxies. It can be used to better protect privacy
+# and confidentiality when accessing specific domains by routing
+# requests to those domains through an anonymous public proxy
+# or to use a caching proxy to speed up browsing. Or chaining to
+# a parent proxy may be necessary because the machine that Privoxy
+# runs on has no direct Internet access.
+#
+# Also specified here are SOCKS proxies. Privoxy supports the SOCKS
+# 4 and SOCKS 4A protocols.
+#
+
+#
+# 5.1. forward
+# ============
+#
+# Specifies:
+#
+# To which parent HTTP proxy specific requests should be routed.
+#
+# Type of value:
+#
+# target_pattern http_parent[:port]
+#
+# where target_pattern is a URL pattern that specifies to which
+# requests (i.e. URLs) this forward rule shall apply. Use /
+# to denote "all URLs". http_parent[:port] is the DNS name or
+# IP address of the parent HTTP proxy through which the requests
+# should be forwarded, optionally followed by its listening port
+# (default: 8080). Use a single dot (.) to denote "no forwarding".
+#
+# Default value:
+#
+# Unset
+#
+# Effect if unset:
+#
+# Don't use parent HTTP proxies.
+#
+# Notes:
+#
+# If http_parent is ".", then requests are not forwarded to
+# another HTTP proxy but are made directly to the web servers.
+#
+# Multiple lines are OK, they are checked in sequence, and the
+# last match wins.
+#
+# Examples:
+#
+# Everything goes to an example anonymizing proxy, except SSL on
+# port 443 (which it doesn't handle):
+#
+# forward / anon-proxy.example.org:8080
+# forward :443 .
+#
+# Everything goes to our example ISP's caching proxy, except for
+# requests to that ISP's sites:
+#
+# forward / caching-proxy.example-isp.net:8000
+# forward .example-isp.net .
+#
+
+#
+# 5.2. forward-socks4 and forward-socks4a
+# =======================================
+#
+# Specifies:
+#
+# Through which SOCKS proxy (and to which parent HTTP proxy)
+# specific requests should be routed.
+#
+# Type of value:
+#
+# target_pattern socks_proxy[:port] http_parent[:port]
+#
+# where target_pattern is a URL pattern that specifies to which
+# requests (i.e. URLs) this forward rule shall apply. Use / to
+# denote "all URLs". http_parent and socks_proxy are IP addresses
+# in dotted decimal notation or valid DNS names (http_parent may
+# be "." to denote "no HTTP forwarding"), and the optional port
+# parameters are TCP ports, i.e. integer values from 1 to 64535
+#
+# Default value:
+#
+# Unset
+#
+# Effect if unset:
+#
+# Don't use SOCKS proxies.
+#
+# Notes:
+#
+# Multiple lines are OK, they are checked in sequence, and the
+# last match wins.
+#
+# The difference between forward-socks4 and forward-socks4a
+# is that in the SOCKS 4A protocol, the DNS resolution of the
+# target hostname happens on the SOCKS server, while in SOCKS 4
+# it happens locally.
+#
+# If http_parent is ".", then requests are not forwarded to another
+# HTTP proxy but are made (HTTP-wise) directly to the web servers,
+# albeit through a SOCKS proxy.
+#
+# Examples:
+#
+# From the company example.com, direct connections are made to all
+# "internal" domains, but everything outbound goes through their
+# ISP's proxy by way of example.com's corporate SOCKS 4A gateway
+# to the Internet.
+#
+# forward-socks4a / socks-gw.example.com:1080 www-cache.example-isp.net:8080
+# forward .example.com .
+#
+# A rule that uses a SOCKS 4 gateway for all destinations but no
+# HTTP parent looks like this:
+#
+# forward-socks4 / socks-gw.example.com:1080 .
+#
+
+#
+# UNCOMMENT THE FOLLOWING TO USE TOR OVER PRIVOXY
+#
+#forward-socks4a / localhost:9050 .
+
+
+#
+# 6. WINDOWS GUI OPTIONS
+# ======================
+#
+# Privoxy has a number of options specific to the Windows GUI
+# interface:
+#
+
+# If "activity-animation" is set to 1, the Privoxy icon will animate
+# when "Privoxy" is active. To turn off, set to 0.
+#
+#activity-animation 1
+
+# If "log-messages" is set to 1, Privoxy will log messages to the
+# console window:
+#
+#log-messages 1
+
+# If "log-buffer-size" is set to 1, the size of the log buffer,
+# i.e. the amount of memory used for the log messages displayed in
+# the console window, will be limited to "log-max-lines" (see below).
+#
+# Warning: Setting this to 0 will result in the buffer to grow
+# infinitely and eat up all your memory!
+#
+#log-buffer-size 1
+
+# log-max-lines is the maximum number of lines held in the log
+# buffer. See above.
+#
+#log-max-lines 200
+
+# If "log-highlight-messages" is set to 1, Privoxy will highlight
+# portions of the log messages with a bold-faced font:
+#
+#log-highlight-messages 1
+
+# The font used in the console window:
+#
+#log-font-name Comic Sans MS
+
+# Font size used in the console window:
+#
+#log-font-size 8
+
+# "show-on-task-bar" controls whether or not Privoxy will appear as
+# a button on the Task bar when minimized:
+#
+#show-on-task-bar 0
+
+# If "close-button-minimizes" is set to 1, the Windows close button
+# will minimize Privoxy instead of closing the program (close with
+# the exit option on the File menu).
+#
+#close-button-minimizes 1
+
+# The "hide-console" option is specific to the MS-Win console version
+# of Privoxy. If this option is used, Privoxy will disconnect from
+# and hide the command console.
+#
+#hide-console
+
+#
diff --git a/recipes/privoxy/files/privoxy.init b/recipes/privoxy/files/privoxy.init
new file mode 100755
index 0000000000..3140c2a30e
--- /dev/null
+++ b/recipes/privoxy/files/privoxy.init
@@ -0,0 +1,49 @@
+
+#! /bin/sh
+#
+# This is an init script for Privoxy on Openzaurus
+#
+
+PRIVOXY_PRG="privoxy"
+PRIVOXY_BIN="/usr/sbin/$PRIVOXY_PRG"
+PRIVOXY_CONF="/etc/$PRIVOXY_PRG/config"
+PRIVOXY_USER="privoxy"
+PRIVOXY_PID=/var/run/$PRIVOXY_PRG.pid
+PRIVOXY_LOCK=/var/lock/subsys/$PRIVOXY_PRG
+PRIVOXY="$PRIVOXY_BIN --user $PRIVOXY_USER --pidfile $PRIVOXY_PID $PRIVOXY_CONF"
+
+test -f $PRIVOXY_BIN || exit 0
+test -f $PRIVOXY_CONF || exit 0
+test -d /var/log/privoxy || mkdir /var/log/privoxy && chown privoxy:privoxy /var/log/privoxy
+
+case "$1" in
+ start)
+ echo -n "Starting privoxy daemon"
+
+ if [ -f $PRIVOXY_PID ]; then
+ killall privoxy && rm -f $PRIVOXY_LOCK $PRIVOXY_PID
+ fi
+
+ start-stop-daemon --start --quiet --exec $PRIVOXY
+ echo "."
+ ;;
+ stop)
+ echo -n "Stopping privoxy daemon"
+ killall $PRIVOXY_PRG
+ echo "."
+ ;;
+ restart)
+ echo -n "Stopping privoxy daemon"
+ killall $PRIVOXY_PRG
+ echo "."
+
+ echo -n "Starting privoxy daemon"
+ start-stop-daemon --start --quiet --exec $PRIVOXY
+ echo "."
+ ;;
+ *)
+ echo "Usage: /etc/init.d/tor {start|stop|restart|start_socats|stop_socats}"
+ exit 1
+esac
+
+exit 0
diff --git a/recipes/privoxy/privoxy_3.0.3.bb b/recipes/privoxy/privoxy_3.0.3.bb
new file mode 100644
index 0000000000..55580b1aa5
--- /dev/null
+++ b/recipes/privoxy/privoxy_3.0.3.bb
@@ -0,0 +1,63 @@
+DESCRIPTION = "Privoxy is a web proxy with advanced filtering capabilities for protecting \
+ privacy, modifying web page content, managing cookies, controlling access, and \
+ removing ads, banners, pop-ups and other obnoxious Internet junk."
+SECTION = "console/network"
+PRIORITY = "optional"
+LICENSE = "GPL"
+DEPENDS = "pcre"
+PR = "r0"
+
+SRC_URI = "${SOURCEFORGE_MIRROR}/ijbswa/privoxy-${PV}-stable-src.tar.gz \
+ file://privoxy.conf \
+ file://privoxy.init"
+
+S = "${WORKDIR}/privoxy-${PV}-stable"
+
+inherit autotools update-rc.d
+
+LDFLAGS += "-L${STAGING_LIBDIR}"
+CFLAGS += "-L${STAGING_LIBDIR} -I${STAGING_INCDIR}"
+
+INITSCRIPT_NAME = "privoxy"
+
+do_compile() {
+ autoheader && autoconf && ./configure --host=localhost --disable-pthread
+ oe_runmake CFLAGS="${CFLAGS}" LDFLAGS="${LDFLAGS}"
+}
+
+do_install() {
+ mkdir -p ${D}/${sbindir}
+ install -m 0755 ${S}/privoxy ${D}/${sbindir}
+
+ # Documentation
+ mkdir -p ${D}/${docdir}
+ install -m 0755 -d ${S}/doc ${D}/${docdir}
+
+ # Install man page
+ mkdir -p ${D}/${mandir}
+ install -m 0755 ${S}/privoxy.1 ${D}/${mandir}
+}
+
+
+do_install_append() {
+ # Install config files
+ install -d ${D}${sysconfdir}/privoxy/templates
+ install ${WORKDIR}/privoxy.conf ${D}${sysconfdir}/privoxy/config
+ install ${S}/templates/* ${D}${sysconfdir}/privoxy/templates/
+ install ${S}/default.action ${D}${sysconfdir}/privoxy/
+ install ${S}/default.filter ${D}${sysconfdir}/privoxy/
+ install ${S}/standard.action ${D}${sysconfdir}/privoxy/
+ install ${S}/trust ${D}${sysconfdir}/privoxy/
+ install ${S}/user.action ${D}${sysconfdir}/privoxy/
+
+ # Install init script
+ install -d ${D}${sysconfdir}/init.d
+ install ${WORKDIR}/privoxy.init ${D}${sysconfdir}/init.d/privoxy
+}
+
+# Add user and groups
+pkg_postinst() {
+ grep -q privoxy: /etc/group || addgroup privoxy
+ grep -q privoxy: /etc/passwd || adduser --disabled-password --home=/etc/privoxy \
+ --ingroup privoxy -g "Privoxy" privoxy
+}