summaryrefslogtreecommitdiff
path: root/recipes/at91bootstrap/at91bootstrap-2.11
diff options
context:
space:
mode:
authorSergey Lapin <slapin@ossfans.org>2009-05-14 17:05:24 +0400
committerSergey Lapin <slapin@ossfans.org>2009-05-16 16:18:09 +0400
commit090d693fff91912acbd0c380a975fb712b71e1c6 (patch)
treece628e77cb37948dcf3d49c5c582be92ca66571f /recipes/at91bootstrap/at91bootstrap-2.11
parentf7cda20ffc2bd30fbb7db898cbffc5d273bb9bb8 (diff)
at91bootstrap: added v2.11
Diffstat (limited to 'recipes/at91bootstrap/at91bootstrap-2.11')
-rw-r--r--recipes/at91bootstrap/at91bootstrap-2.11/0001-AFEB9260-support.patch1357
-rw-r--r--recipes/at91bootstrap/at91bootstrap-2.11/afeb9260-166/defconfig94
2 files changed, 1451 insertions, 0 deletions
diff --git a/recipes/at91bootstrap/at91bootstrap-2.11/0001-AFEB9260-support.patch b/recipes/at91bootstrap/at91bootstrap-2.11/0001-AFEB9260-support.patch
new file mode 100644
index 0000000000..1b13a590ff
--- /dev/null
+++ b/recipes/at91bootstrap/at91bootstrap-2.11/0001-AFEB9260-support.patch
@@ -0,0 +1,1357 @@
+From 9d253ab04ceaea4aeebf397e3397c2088f08bd87 Mon Sep 17 00:00:00 2001
+From: slapin <slapin@builder.iar.darktech.org>
+Date: Sun, 10 May 2009 02:16:44 +0400
+Subject: [PATCH] AFEB9260 support
+
+
+Signed-off-by: Sergey Lapin <slapin@ossfans.org>
+---
+ Config.in | 5 +-
+ Makefile | 2 +-
+ board/Config.in | 47 +++++-
+ board/afeb9260/afeb9260.c | 246 +++++++++++++++++++++++++++++
+ board/afeb9260/afeb9260.h | 126 +++++++++++++++
+ board/afeb9260/afeb9260_defconfig | 94 +++++++++++
+ board/afeb9260/old/afeb9260.c | 240 ++++++++++++++++++++++++++++
+ board/afeb9260/old/afeb9260.mk | 8 +
+ board/afeb9260/old/dataflash/afeb9260.h | 127 +++++++++++++++
+ board/afeb9260/old/nandflash/afeb9260ek.h | 151 ++++++++++++++++++
+ board/afeb9260/old/pll.h | 35 ++++
+ board/board_cpp.mk | 25 +++
+ driver/Config.in.dataflash | 2 +-
+ driver/dataflash.c | 2 +-
+ include/part.h | 6 +
+ 15 files changed, 1105 insertions(+), 11 deletions(-)
+ create mode 100644 board/afeb9260/afeb9260.c
+ create mode 100644 board/afeb9260/afeb9260.h
+ create mode 100644 board/afeb9260/afeb9260_defconfig
+ create mode 100644 board/afeb9260/old/afeb9260.c
+ create mode 100644 board/afeb9260/old/afeb9260.mk
+ create mode 100644 board/afeb9260/old/dataflash/afeb9260.h
+ create mode 100644 board/afeb9260/old/nandflash/afeb9260ek.h
+ create mode 100644 board/afeb9260/old/pll.h
+
+diff --git a/Config.in b/Config.in
+index e187a27..d7f7a3b 100644
+--- a/Config.in
++++ b/Config.in
+@@ -109,4 +109,7 @@ config CONFIG_USER_HW_INIT
+ help
+ Initialize Hardware
+
+-
++config CONFIG_THUMB
++ bool "Build in thumb mode"
++ help
++ Build code in thumb mode
+diff --git a/Makefile b/Makefile
+index 32bd556..8a53e94 100644
+--- a/Makefile
++++ b/Makefile
+@@ -189,7 +189,7 @@ include driver/driver_cpp.mk
+ # -lgcc : tells the linker to tie in newlib
+ LDFLAGS+=-nostartfiles -Map=result/$(BOOT_NAME).map --cref
+ #LDFLAGS+=-lc -lgcc
+-LDFLAGS+=-T elf32-littlearm.lds -Ttext $(LINK_ADDR)
++LDFLAGS+=-T elf32-littlearm.lds --gc-sections -Ttext $(LINK_ADDR)
+
+ all: $(obj) $(AT91BOOTSTRAP) .config filesize
+
+diff --git a/board/Config.in b/board/Config.in
+index 074018a..1c2168b 100644
+--- a/board/Config.in
++++ b/board/Config.in
+@@ -92,6 +92,17 @@ config CONFIG_AT91CAP9ADK
+ help
+ Use the AT91CAP9ADK Development board
+
++config CONFIG_AFEB9260
++ bool "afeb9260"
++ select CONFIG_SDRAM
++ select ALLOW_DATAFLASH
++ select ALLOW_NANDFLASH
++ select ALLOW_CPU_CLK_166MHZ
++ select ALLOW_CPU_CLK_180MHZ
++ select ALLOW_CRYSTAL_18_432MHZ
++ help
++ Use the AFEB9260 Development board
++
+ endchoice
+
+ config CONFIG_CHIP
+@@ -103,6 +114,7 @@ config CONFIG_CHIP
+ default "AT91SAM9XE" if CONFIG_AT91SAM9XEEK
+ default "AT91SAM9G20" if CONFIG_AT91SAM9G20EK
+ default "AT91CAP9" if CONFIG_AT91CAP9ADK
++ default "AT91SAM9260" if CONFIG_AFEB9260
+ help
+ Name of the board, A Board Support package
+ (BSP) must be available.
+@@ -116,6 +128,7 @@ config CONFIG_BOARD
+ default "at91sam9xeek" if CONFIG_AT91SAM9XEEK
+ default "at91sam9g20ek" if CONFIG_AT91SAM9G20EK
+ default "at91cap9adk" if CONFIG_AT91CAP9ADK
++ default "afeb9260" if CONFIG_AFEB9260
+ help
+ Name of the board, A Board Support package
+ (BSP) must be available.
+@@ -129,6 +142,7 @@ config CONFIG_MACH_TYPE
+ default "0x44B" if CONFIG_AT91SAM9XEEK
+ default "0x658" if CONFIG_AT91SAM9G20EK
+ default "1442" if CONFIG_AT91CAP9ADK
++ default "1859" if CONFIG_AFEB9260
+ help
+
+ config CONFIG_LINK_ADDR
+@@ -141,6 +155,7 @@ config CONFIG_LINK_ADDR
+ default "0x200000" if CONFIG_AT91SAM9G20EK
+ default "0x000000" if CONFIG_AT91CAP9ADK && CONFIG_DATAFLASH
+ default "0x100000" if CONFIG_AT91CAP9ADK && CONFIG_FLASH
++ default "0x200000" if CONFIG_AFEB9260
+ default "0x200000"
+ help
+
+@@ -153,11 +168,13 @@ config CONFIG_TOP_OF_MEMORY
+ default "0x301000" if CONFIG_AT91SAM9XEEK
+ default "0x301000" if CONFIG_AT91SAM9G20EK
+ default "0x108000" if CONFIG_AT91CAP9ADK
++ default "0x301000" if CONFIG_AFEB9260
+ help
+
+ config CONFIG_BOOTSTRAP_MAXSIZE
+ string
+ default "4096" if CONFIG_AT91SAM9260EK
++ default "4096" if CONFIG_AFEB9260
+ default "16384"
+
+ choice
+@@ -212,6 +229,14 @@ choice
+ prompt "CPU clock"
+ default CONFIG_CPU_CLK_200MHZ
+
++config CONFIG_CPU_CLK_166MHZ
++ bool "166 MHz"
++ depends on ALLOW_CPU_CLK_166MHZ
++
++config CONFIG_CPU_CLK_180MHZ
++ bool "180 MHz"
++ depends on ALLOW_CPU_CLK_180MHZ
++
+ config CONFIG_CPU_CLK_200MHZ
+ bool "200 MHz"
+ depends on ALLOW_CPU_CLK_200MHZ
+@@ -231,6 +256,12 @@ config CONFIG_CPU_CLK_400MHZ
+
+ endchoice
+
++config ALLOW_CPU_CLK_166MHZ
++ bool
++
++config ALLOW_CPU_CLK_180MHZ
++ bool
++
+ config ALLOW_CPU_CLK_200MHZ
+ bool
+
+@@ -251,10 +282,18 @@ config DISABLE_CPU_CLK_240MHZ
+ choice
+ prompt "Bus Speed"
+ default CONFIG_BUS_SPEED_133MHZ
+- depends on CONFIG_AT91SAM9G20EK
++ depends on CONFIG_AT91SAM9G20EK || CONFIG_AFEB9260
+ help
+ Select the speed of the bus
+
++config CONFIG_BUS_SPEED_83MHZ
++ bool "83 MHz"
++ depends on CONFIG_AFEB9260
++
++config CONFIG_BUS_SPEED_90MHZ
++ bool "90 MHz"
++ depends on CONFIG_AFEB9260
++
+ config CONFIG_BUS_SPEED_100MHZ
+ bool "100 MHz"
+ depends on CONFIG_AT91SAM9G20EK
+@@ -264,9 +303,3 @@ config CONFIG_BUS_SPEED_133MHZ
+ depends on CONFIG_AT91SAM9G20EK
+
+ endchoice
+-
+-
+-
+-
+-
+-
+diff --git a/board/afeb9260/afeb9260.c b/board/afeb9260/afeb9260.c
+new file mode 100644
+index 0000000..4e11b6b
+--- /dev/null
++++ b/board/afeb9260/afeb9260.c
+@@ -0,0 +1,246 @@
++/* ----------------------------------------------------------------------------
++ * ATMEL Microcontroller Software Support - ROUSSET -
++ * ----------------------------------------------------------------------------
++ * Copyright (c) 2006, Atmel Corporation
++
++ * All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions are met:
++ *
++ * - Redistributions of source code must retain the above copyright notice,
++ * this list of conditions and the disclaiimer below.
++ *
++ * Atmel's name may not be used to endorse or promote products derived from
++ * this software without specific prior written permission.
++ *
++ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
++ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
++ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
++ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
++ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
++ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
++ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ * ----------------------------------------------------------------------------
++ * File Name : at91sam9260ek.c
++ * Object :
++ * Creation : NLe Jul 13th 2006
++ * ODi Nov 9th : dstp #3507 "Bad PIO descriptors in at91samxxxek.c"
++ *-----------------------------------------------------------------------------
++ */
++#include "part.h"
++#include "main.h"
++#include "gpio.h"
++#include "pmc.h"
++#include "debug.h"
++#include "memory.h"
++
++static inline unsigned int get_cp15(void)
++{
++ unsigned int value;
++ __asm__("mrc p15, 0, %0, c1, c0, 0" : "=r" (value));
++ return value;
++}
++
++static inline void set_cp15(unsigned int value)
++{
++ __asm__("mcr p15, 0, %0, c1, c0, 0" : : "r" (value));
++}
++
++#ifdef CONFIG_HW_INIT
++/*----------------------------------------------------------------------------*/
++/* \fn hw_init */
++/* \brief This function performs very low level HW initialization */
++/* This function is invoked as soon as possible during the c_startup */
++/* The bss segment must be initialized */
++/*----------------------------------------------------------------------------*/
++void hw_init(void)
++{
++ unsigned int cp15;
++
++ /* Disable watchdog */
++ writel(AT91C_WDTC_WDDIS, AT91C_BASE_WDTC + WDTC_WDMR);
++
++ /* At this stage the main oscillator is supposed to be enabled
++ * PCK = MCK = MOSC */
++
++ /* Configure PLLA = MOSC * (PLL_MULA + 1) / PLL_DIVA */
++ pmc_cfg_plla(PLLA_SETTINGS, PLL_LOCK_TIMEOUT);
++
++ /* PCK = PLLA = 2 * MCK */
++ pmc_cfg_mck(MCKR_SETTINGS, PLL_LOCK_TIMEOUT);
++ /* Switch MCK on PLLA output */
++ pmc_cfg_mck(MCKR_CSS_SETTINGS, PLL_LOCK_TIMEOUT);
++
++ /* Configure PLLB */
++ pmc_cfg_pllb(PLLB_SETTINGS, PLL_LOCK_TIMEOUT);
++
++ /* Configure CP15 */
++ cp15 = get_cp15();
++ cp15 |= I_CACHE;
++ set_cp15(cp15);
++
++ /* Configure the PIO controller */
++ writel(3 << 14, AT91C_BASE_PIOB + PIO_ASR(0));
++ writel(3 << 14, AT91C_BASE_PIOB + PIO_PDR(0));
++
++ /* Configure the EBI Slave Slot Cycle to 64 */
++ writel( (readl((AT91C_BASE_MATRIX + MATRIX_SCFG3)) & ~0xFF) | 0x40, (AT91C_BASE_MATRIX + MATRIX_SCFG3));
++
++#ifdef CONFIG_DEBUG
++ /* Enable Debug messages on the DBGU */
++ dbg_init(BAUDRATE(MASTER_CLOCK, 115200));
++ header();
++#endif /* CONFIG_DEBUG */
++
++#ifdef CONFIG_SDRAM
++ /* Initialize the matrix */
++ writel(readl(AT91C_BASE_CCFG + CCFG_EBICSA) | AT91C_EBI_CS1A_SDRAMC, AT91C_BASE_CCFG + CCFG_EBICSA);
++
++#if defined(CONFIG_BUS_SPEED_83MHZ) || defined(CONFIG_BUS_SPEED_90MHZ)
++/* CLK= 11ns */
++/* TWR = tDPL = 2 2CLK always */
++/* TRC = tRC = 65ns = 6 clk */
++/* TRP = tRP = 20ns = 2 clk */
++/* TRCD = tRCD = 20ns = 2 clk */
++/* TRAS = tRAS = 45ns = 5 clk */
++/* TXSR = tRRC = 65ns = 6 clk */
++
++ sdram_init( AT91C_SDRAMC_NC_9 |
++ AT91C_SDRAMC_NR_13 |
++ AT91C_SDRAMC_CAS_2 |
++ AT91C_SDRAMC_NB_4_BANKS |
++ AT91C_SDRAMC_DBW_32_BITS |
++ AT91C_SDRAMC_TWR_2 |
++ AT91C_SDRAMC_TRC_6 | /* *7 */
++ AT91C_SDRAMC_TRP_2 |
++ AT91C_SDRAMC_TRCD_2 |
++ AT91C_SDRAMC_TRAS_5 | /* *5 */
++ AT91C_SDRAMC_TXSR_6, /* *8 */ /* Control Register */
++ 710, AT91C_SDRAMC_MD_SDRAM); /* Refresh Timer Register */
++#else
++ /* Configure SDRAM Controller */
++ sdram_init( AT91C_SDRAMC_NC_9 |
++ AT91C_SDRAMC_NR_13 |
++ AT91C_SDRAMC_CAS_2 |
++ AT91C_SDRAMC_NB_4_BANKS |
++ AT91C_SDRAMC_DBW_32_BITS |
++ AT91C_SDRAMC_TWR_2 |
++ AT91C_SDRAMC_TRC_7 |
++ AT91C_SDRAMC_TRP_2 |
++ AT91C_SDRAMC_TRCD_2 |
++ AT91C_SDRAMC_TRAS_5 |
++ AT91C_SDRAMC_TXSR_8, /* Control Register */
++ (MASTER_CLOCK * 7)/1000000, /* Refresh Timer Register */
++ AT91C_SDRAMC_MD_SDRAM); /* SDRAM (no low power) */
++#endif
++
++#endif /* CONFIG_SDRAM */
++}
++#endif /* CONFIG_HW_INIT */
++
++#ifdef CONFIG_SDRAM
++/*------------------------------------------------------------------------------*/
++/* \fn sdramc_hw_init */
++/* \brief This function performs SDRAMC HW initialization */
++/*------------------------------------------------------------------------------*/
++void sdramc_hw_init(void)
++{
++ /* Configure PIOs */
++/* const struct pio_desc sdramc_pio[] = {
++ {"D16", AT91C_PIN_PC(16), 0, PIO_DEFAULT, PIO_PERIPH_A},
++ {"D17", AT91C_PIN_PC(17), 0, PIO_DEFAULT, PIO_PERIPH_A},
++ {"D18", AT91C_PIN_PC(18), 0, PIO_DEFAULT, PIO_PERIPH_A},
++ {"D19", AT91C_PIN_PC(19), 0, PIO_DEFAULT, PIO_PERIPH_A},
++ {"D20", AT91C_PIN_PC(20), 0, PIO_DEFAULT, PIO_PERIPH_A},
++ {"D21", AT91C_PIN_PC(21), 0, PIO_DEFAULT, PIO_PERIPH_A},
++ {"D22", AT91C_PIN_PC(22), 0, PIO_DEFAULT, PIO_PERIPH_A},
++ {"D23", AT91C_PIN_PC(23), 0, PIO_DEFAULT, PIO_PERIPH_A},
++ {"D24", AT91C_PIN_PC(24), 0, PIO_DEFAULT, PIO_PERIPH_A},
++ {"D25", AT91C_PIN_PC(25), 0, PIO_DEFAULT, PIO_PERIPH_A},
++ {"D26", AT91C_PIN_PC(26), 0, PIO_DEFAULT, PIO_PERIPH_A},
++ {"D27", AT91C_PIN_PC(27), 0, PIO_DEFAULT, PIO_PERIPH_A},
++ {"D28", AT91C_PIN_PC(28), 0, PIO_DEFAULT, PIO_PERIPH_A},
++ {"D29", AT91C_PIN_PC(29), 0, PIO_DEFAULT, PIO_PERIPH_A},
++ {"D30", AT91C_PIN_PC(30), 0, PIO_DEFAULT, PIO_PERIPH_A},
++ {"D31", AT91C_PIN_PC(31), 0, PIO_DEFAULT, PIO_PERIPH_A},
++ {(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
++ };
++*/
++ /* Configure the SDRAMC PIO controller to output PCK0 */
++/* pio_setup(sdramc_pio); */
++
++ writel(0xFFFF0000, AT91C_BASE_PIOC + PIO_ASR(0));
++ writel(0xFFFF0000, AT91C_BASE_PIOC + PIO_PDR(0));
++
++}
++#endif /* CONFIG_SDRAM */
++
++#ifdef CONFIG_DATAFLASH
++/*------------------------------------------------------------------------------*/
++/* \fn df_hw_init */
++/* \brief This function performs DataFlash HW initialization */
++/*------------------------------------------------------------------------------*/
++void df_hw_init(void)
++{
++ writel(0xf, 0xfffff444);
++ writel(0xf, 0xfffff460);
++ writel(0xf, 0xfffff470);
++ writel(0xf, 0xfffff404);
++ writel(1 << 11, AT91C_BASE_PIOC + PIO_BSR(0));
++ writel(1 << 11, AT91C_BASE_PIOC + PIO_PDR(0));
++}
++#endif /* CONFIG_DATAFLASH */
++
++/* We init NAND regardless of whatever */
++/*------------------------------------------------------------------------------*/
++/* \fn nandflash_hw_init */
++/* \brief NandFlash HW init */
++/*------------------------------------------------------------------------------*/
++void nandflash_hw_init(void)
++{
++ /* Setup Smart Media, first enable the address range of CS3 in HMATRIX user interface */
++ writel(readl(AT91C_BASE_CCFG + CCFG_EBICSA) | AT91C_EBI_CS3A_SM, AT91C_BASE_CCFG + CCFG_EBICSA);
++
++ /* Configure SMC CS3 */
++ writel((AT91C_SM_NWE_SETUP | AT91C_SM_NCS_WR_SETUP | AT91C_SM_NRD_SETUP | AT91C_SM_NCS_RD_SETUP), AT91C_BASE_SMC + SMC_SETUP3);
++ writel((AT91C_SM_NWE_PULSE | AT91C_SM_NCS_WR_PULSE | AT91C_SM_NRD_PULSE | AT91C_SM_NCS_RD_PULSE), AT91C_BASE_SMC + SMC_PULSE3);
++ writel((AT91C_SM_NWE_CYCLE | AT91C_SM_NRD_CYCLE) , AT91C_BASE_SMC + SMC_CYCLE3);
++ writel((AT91C_SMC_READMODE | AT91C_SMC_WRITEMODE | AT91C_SMC_NWAITM_NWAIT_DISABLE |
++ AT91C_SMC_DBW_WIDTH_EIGTH_BITS | AT91C_SM_TDF) , AT91C_BASE_SMC + SMC_CTRL3);
++
++ /* Configure the PIO controller */
++ writel((1 << AT91C_ID_PIOC), PMC_PCER + AT91C_BASE_PMC);
++
++ writel(1 << 13, AT91C_BASE_PIOC + PIO_IFDR(0));
++ writel(1 << 13, AT91C_BASE_PIOC + PIO_PPUER(0));
++ writel(1 << 13, AT91C_BASE_PIOC + PIO_ODR(0));
++ writel(1 << 14, AT91C_BASE_PIOC + PIO_CODR(0));
++ writel(1 << 14, AT91C_BASE_PIOC + PIO_MDDR(0));
++ writel(1 << 14, AT91C_BASE_PIOC + PIO_PPUDR(0));
++ writel(1 << 14, AT91C_BASE_PIOC + PIO_OER(0));
++ writel(3 << 13, AT91C_BASE_PIOC + PIO_IDR(0));
++ writel(3 << 13, AT91C_BASE_PIOC + PIO_PER(0));
++}
++
++
++/*------------------------------------------------------------------------------*/
++/* \fn nandflash_cfg_16bits_dbw_init */
++/* \brief Configure SMC in 16 bits mode */
++/*------------------------------------------------------------------------------*/
++void nandflash_cfg_16bits_dbw_init(void)
++{
++ writel(readl(AT91C_BASE_SMC + SMC_CTRL3) | AT91C_SMC_DBW_WIDTH_SIXTEEN_BITS, AT91C_BASE_SMC + SMC_CTRL3);
++}
++
++/*------------------------------------------------------------------------------*/
++/* \fn nandflash_cfg_8bits_dbw_init */
++/* \brief Configure SMC in 8 bits mode */
++/*------------------------------------------------------------------------------*/
++void nandflash_cfg_8bits_dbw_init(void)
++{
++ writel((readl(AT91C_BASE_SMC + SMC_CTRL3) & ~(AT91C_SMC_DBW)) | AT91C_SMC_DBW_WIDTH_EIGTH_BITS, AT91C_BASE_SMC + SMC_CTRL3);
++}
+diff --git a/board/afeb9260/afeb9260.h b/board/afeb9260/afeb9260.h
+new file mode 100644
+index 0000000..7310c0f
+--- /dev/null
++++ b/board/afeb9260/afeb9260.h
+@@ -0,0 +1,126 @@
++/* ----------------------------------------------------------------------------
++ * ATMEL Microcontroller Software Support - ROUSSET -
++ * ----------------------------------------------------------------------------
++ * Copyright (c) 2006, Atmel Corporation
++
++ * All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions are met:
++ *
++ * - Redistributions of source code must retain the above copyright notice,
++ * this list of conditions and the disclaiimer below.
++ *
++ * Atmel's name may not be used to endorse or promote products derived from
++ * this software without specific prior written permission.
++ *
++ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
++ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
++ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
++ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
++ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
++ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
++ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ * ----------------------------------------------------------------------------
++ * File Name : afeb9260.h
++ * Object :
++ * Creation : NLe Jul 13th 2006
++ *-----------------------------------------------------------------------------
++ */
++#ifndef _AFEB9260_H
++#define _AFEB9260_H
++
++/* ******************************************************************* */
++/* PMC Settings */
++/* */
++/* The main oscillator is enabled as soon as possible in the c_startup */
++/* and MCK is switched on the main oscillator. */
++/* PLL initialization is done later in the hw_init() function */
++/* ******************************************************************* */
++#if defined(CONFIG_CPU_CLK_200MHZ)
++#define MASTER_CLOCK (198656000/2)
++#define PLLA_SETTINGS 0x2060BF09
++#endif
++
++#if defined(CONFIG_CPU_CLK_166MHZ)
++#define PLLA_SETTINGS 0x25ceBFa5 /* 166MHz */
++#define MASTER_CLOCK (165999709/2) /* 166MHz MCK=83MHz*/
++#endif
++
++#if defined(CONFIG_CPU_CLK_180MHZ)
++#define PLLA_SETTINGS 0x2125BF1E /* 180MHz */
++#define MASTER_CLOCK (179999198/2) /* 180MHz MCK=90MHz */
++#endif
++
++#define TOP_OF_MEMORY 0x301000
++#define PLL_LOCK_TIMEOUT 1000000
++
++#define PLLB_SETTINGS 0x10483F0E
++
++/* Switch MCK on PLLA output PCK = PLLA = 2 * MCK */
++#define MCKR_SETTINGS (AT91C_PMC_PRES_CLK | AT91C_PMC_MDIV_2)
++#define MCKR_CSS_SETTINGS (AT91C_PMC_CSS_PLLA_CLK | MCKR_SETTINGS)
++
++/* ******************************************************************* */
++/* DataFlash Settings */
++/* */
++/* ******************************************************************* */
++#define AT91C_BASE_SPI AT91C_BASE_SPI0
++#define AT91C_ID_SPI AT91C_ID_SPI0
++
++/* AC characteristics */
++/* DLYBS = tCSS= 250ns min and DLYBCT = tCSH = 250ns */
++#define DATAFLASH_TCSS (0x1a << 16) /* 250ns min (tCSS) <=> 12/48000000 = 250ns */
++#define DATAFLASH_TCHS (0x1 << 24) /* 250ns min (tCSH) <=> (64*1+SCBR)/(2*48000000) */
++
++#define DF_CS_SETTINGS (AT91C_SPI_NCPHA | (AT91C_SPI_DLYBS & DATAFLASH_TCSS) | (AT91C_SPI_DLYBCT & DATAFLASH_TCHS) | ((MASTER_CLOCK / AT91C_SPI_CLK) << 8))
++
++/* ******************************************************************* */
++/* NandFlash Settings */
++/* */
++/* ******************************************************************* */
++#define AT91C_SMARTMEDIA_BASE 0x40000000
++
++#define AT91_SMART_MEDIA_ALE (1 << 21) /* our ALE is AD21 */
++#define AT91_SMART_MEDIA_CLE (1 << 22) /* our CLE is AD22 */
++
++#define NAND_DISABLE_CE() do { *(volatile unsigned int *)AT91C_PIOC_SODR = AT91C_PIO_PC14;} while(0)
++#define NAND_ENABLE_CE() do { *(volatile unsigned int *)AT91C_PIOC_CODR = AT91C_PIO_PC14;} while(0)
++
++#define NAND_WAIT_READY() while (!(*(volatile unsigned int *)AT91C_PIOC_PDSR & AT91C_PIO_PC13))
++
++
++/* ******************************************************************** */
++/* SMC Chip Select 3 Timings for NandFlash for MASTER_CLOCK = 100000000.*/
++/* Please refer to SMC section in AT91SAM datasheet to learn how */
++/* to generate these values. */
++/* ******************************************************************** */
++#define AT91C_SM_NWE_SETUP (1 << 0)
++#define AT91C_SM_NCS_WR_SETUP (0 << 8)
++#define AT91C_SM_NRD_SETUP (1 << 16)
++#define AT91C_SM_NCS_RD_SETUP (0 << 24)
++
++#define AT91C_SM_NWE_PULSE (3 << 0)
++#define AT91C_SM_NCS_WR_PULSE (3 << 8)
++#define AT91C_SM_NRD_PULSE (3 << 16)
++#define AT91C_SM_NCS_RD_PULSE (3 << 24)
++
++#define AT91C_SM_NWE_CYCLE (5 << 0)
++#define AT91C_SM_NRD_CYCLE (5 << 16)
++#define AT91C_SM_TDF (2 << 16)
++
++#endif /* _AT91SAM9260EK_H */
++
++
++
++
++
++
++
++
++
++
++
+diff --git a/board/afeb9260/afeb9260_defconfig b/board/afeb9260/afeb9260_defconfig
+new file mode 100644
+index 0000000..bf8b6f9
+--- /dev/null
++++ b/board/afeb9260/afeb9260_defconfig
+@@ -0,0 +1,94 @@
++#
++# Automatically generated make config: don't edit
++# Sun May 10 01:26:05 2009
++#
++HAVE_DOT_CONFIG=y
++CONFIG_BOARDNAME="afeb9260"
++# CONFIG_AT91SAM9260EK is not set
++# CONFIG_AT91SAM9261EK is not set
++# CONFIG_AT91SAM9263EK is not set
++# CONFIG_AT91SAM9RLEK is not set
++# CONFIG_AT91SAM9XEEK is not set
++# CONFIG_AT91SAM9G20EK is not set
++# CONFIG_AT91CAP9ADK is not set
++CONFIG_AFEB9260=y
++CONFIG_CHIP="AT91SAM9260"
++CONFIG_BOARD="afeb9260"
++CONFIG_MACH_TYPE="1859"
++CONFIG_LINK_ADDR="0x200000"
++CONFIG_TOP_OF_MEMORY="0x301000"
++CONFIG_BOOTSTRAP_MAXSIZE="4096"
++# CONFIG_CRYSTAL_12_000MHZ is not set
++# CONFIG_CRYSTAL_16_000MHZ is not set
++# CONFIG_CRYSTAL_16_36766MHZ is not set
++CONFIG_CRYSTAL_18_432MHZ=y
++ALLOW_CRYSTAL_18_432MHZ=y
++CONFIG_CRYSTAL="CRYSTAL_18_432MHZ"
++CONFIG_CPU_CLK_166MHZ=y
++# CONFIG_CPU_CLK_180MHZ is not set
++# CONFIG_CPU_CLK_200MHZ is not set
++# CONFIG_CPU_CLK_240MHZ is not set
++# CONFIG_CPU_CLK_266MHZ is not set
++# CONFIG_CPU_CLK_400MHZ is not set
++ALLOW_CPU_CLK_166MHZ=y
++ALLOW_CPU_CLK_180MHZ=y
++# DISABLE_CPU_CLK_240MHZ is not set
++CONFIG_BUS_SPEED_83MHZ=y
++# CONFIG_BUS_SPEED_90MHZ is not set
++# CONFIG_BUS_SPEED_100MHZ is not set
++# CONFIG_BUS_SPEED_133MHZ is not set
++
++#
++# Memory selection
++#
++CONFIG_SDRAM=y
++# CONFIG_SDDRC is not set
++# CONFIG_DDR2 is not set
++ALLOW_DATAFLASH=y
++# ALLOW_FLASH is not set
++ALLOW_NANDFLASH=y
++# ALLOW_SDCARD is not set
++# ALLOW_PSRAM is not set
++# ALLOW_SDRAM_16BIT is not set
++# CONFIG_RAM_32MB is not set
++CONFIG_RAM_64MB=y
++# CONFIG_RAM_128MB is not set
++# CONFIG_RAM_256MB is not set
++CONFIG_DATAFLASH=y
++# CONFIG_FLASH is not set
++# CONFIG_NANDFLASH is not set
++# CONFIG_SDCARD is not set
++CONFIG_MEMORY="dataflash"
++
++#
++# SPI configuration
++#
++CONFIG_SPI_CLK=33000000
++# CONFIG_SPI_BOOT_CS0 is not set
++CONFIG_SPI_BOOT_CS1=y
++# DATAFLASHCARD_ON_CS0 is not set
++# DATAFLASHCARD_ON_CS1 is not set
++# DATAFLASHCARD_ON_CS2 is not set
++# DATAFLASHCARD_ON_CS3 is not set
++# CONFIG_DATAFLASHCARD is not set
++CONFIG_CARD_SUFFIX=""
++CONFIG_SPI_BOOT="AT91C_SPI_PCS1_DATAFLASH"
++CONFIG_SPI_MODE_0=y
++# CONFIG_SPI_MODE_1 is not set
++# CONFIG_SPI_MODE_2 is not set
++# CONFIG_SPI_MODE_3 is not set
++CONFIG_SPI_MODE=0
++CONFIG_PROJECT="dataflash"
++CONFIG_LOAD_UBOOT=y
++# CONFIG_LOAD_64KB is not set
++# CONFIG_LOAD_1MB is not set
++# CONFIG_LOAD_4MB is not set
++CONFIG_IMG_ADDRESS="0x00008400"
++CONFIG_IMG_SIZE="0x00040000"
++CONFIG_JUMP_ADDR="0x23F00000"
++CONFIG_APP_CHECK=y
++# CONFIG_LONG_TEST is not set
++CONFIG_DEBUG=y
++CONFIG_HW_INIT=y
++# CONFIG_USER_HW_INIT is not set
++CONFIG_THUMB=y
+diff --git a/board/afeb9260/old/afeb9260.c b/board/afeb9260/old/afeb9260.c
+new file mode 100644
+index 0000000..81c0919
+--- /dev/null
++++ b/board/afeb9260/old/afeb9260.c
+@@ -0,0 +1,240 @@
++/* ----------------------------------------------------------------------------
++ * ATMEL Microcontroller Software Support - ROUSSET -
++ * ----------------------------------------------------------------------------
++ * Copyright (c) 2006, Atmel Corporation
++
++ * All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions are met:
++ *
++ * - Redistributions of source code must retain the above copyright notice,
++ * this list of conditions and the disclaiimer below.
++ *
++ * - Redistributions in binary form must reproduce the above copyright notice,
++ * this list of conditions and the disclaimer below in the documentation and/or
++ * other materials provided with the distribution.
++ *
++ * Atmel's name may not be used to endorse or promote products derived from
++ * this software without specific prior written permission.
++ *
++ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
++ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
++ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
++ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
++ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
++ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
++ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ * ----------------------------------------------------------------------------
++ * File Name : at91sam9260ek.c
++ * Object :
++ * Creation : NLe Jul 13th 2006
++ * ODi Nov 9th : dstp #3507 "Bad PIO descriptors in at91samxxxek.c"
++ *-----------------------------------------------------------------------------
++ */
++#include "../../include/part.h"
++#include "../../include/gpio.h"
++#include "../../include/pmc.h"
++#include "../../include/debug.h"
++#include "../../include/sdramc.h"
++#include "../../include/main.h"
++#ifdef CFG_NANDFLASH
++#include "../../include/nandflash.h"
++#endif
++#ifdef CFG_DATAFLASH
++#include "../../include/dataflash.h"
++#endif
++#ifdef CFG_FLASH
++#include "../../include/flash.h"
++#endif
++
++/* We init NAND regardless of whatever */
++/*------------------------------------------------------------------------------*/
++/* \fn nandflash_hw_init */
++/* \brief NandFlash HW init */
++/*------------------------------------------------------------------------------*/
++void nandflash_hw_init(void)
++{
++ /* Setup Smart Media, first enable the address range of CS3 in HMATRIX user interface */
++ writel(readl(AT91C_BASE_CCFG + CCFG_EBICSA) | AT91C_EBI_CS3A_SM, AT91C_BASE_CCFG + CCFG_EBICSA);
++
++ /* Configure SMC CS3 */
++ writel((AT91C_SM_NWE_SETUP | AT91C_SM_NCS_WR_SETUP | AT91C_SM_NRD_SETUP | AT91C_SM_NCS_RD_SETUP), AT91C_BASE_SMC + SMC_SETUP3);
++ writel((AT91C_SM_NWE_PULSE | AT91C_SM_NCS_WR_PULSE | AT91C_SM_NRD_PULSE | AT91C_SM_NCS_RD_PULSE), AT91C_BASE_SMC + SMC_PULSE3);
++ writel((AT91C_SM_NWE_CYCLE | AT91C_SM_NRD_CYCLE) , AT91C_BASE_SMC + SMC_CYCLE3);
++ writel((AT91C_SMC_READMODE | AT91C_SMC_WRITEMODE | AT91C_SMC_NWAITM_NWAIT_DISABLE |
++ AT91C_SMC_DBW_WIDTH_EIGTH_BITS | AT91C_SM_TDF) , AT91C_BASE_SMC + SMC_CTRL3);
++
++ /* Configure the PIO controller */
++ writel((1 << AT91C_ID_PIOC), PMC_PCER + AT91C_BASE_PMC);
++
++ writel(1 << 13, AT91C_BASE_PIOC + PIO_IFDR(0));
++ writel(1 << 13, AT91C_BASE_PIOC + PIO_PPUER(0));
++ writel(1 << 13, AT91C_BASE_PIOC + PIO_ODR(0));
++ writel(1 << 14, AT91C_BASE_PIOC + PIO_CODR(0));
++ writel(1 << 14, AT91C_BASE_PIOC + PIO_MDDR(0));
++ writel(1 << 14, AT91C_BASE_PIOC + PIO_PPUDR(0));
++ writel(1 << 14, AT91C_BASE_PIOC + PIO_OER(0));
++ writel(3 << 13, AT91C_BASE_PIOC + PIO_IDR(0));
++ writel(3 << 13, AT91C_BASE_PIOC + PIO_PER(0));
++}
++
++
++#ifdef CFG_HW_INIT
++/*----------------------------------------------------------------------------*/
++/* \fn hw_init */
++/* \brief This function performs very low level HW initialization */
++/* This function is invoked as soon as possible during the c_startup */
++/* The bss segment must be initialized */
++/*----------------------------------------------------------------------------*/
++void hw_init(void)
++{
++ /* Disable watchdog */
++ writel(AT91C_WDTC_WDDIS, AT91C_BASE_WDTC + WDTC_WDMR);
++
++ /* At this stage the main oscillator is supposed to be enabled
++ * PCK = MCK = MOSC */
++
++ /* Configure PLLA = MOSC * (PLL_MULA + 1) / PLL_DIVA */
++ pmc_cfg_plla(PLLA_SETTINGS, PLL_LOCK_TIMEOUT);
++
++ /* Switch MCK on PLLA output PCK = PLLA = 2 * MCK */
++ pmc_cfg_mck(MCKR_SETTINGS, PLL_LOCK_TIMEOUT);
++
++ /* Configure PLLB */
++ pmc_cfg_pllb(PLLB_SETTINGS, PLL_LOCK_TIMEOUT);
++
++ /* Configure the PIO controller */
++ writel(3 << 14, AT91C_BASE_PIOB + PIO_ASR(0));
++ writel(3 << 14, AT91C_BASE_PIOB + PIO_PDR(0));
++
++#ifdef CFG_DEBUG
++ /* Enable Debug messages on the DBGU */
++ dbg_init(BAUDRATE(MASTER_CLOCK, 115200));
++
++ dbg_print("AT91 bootstrap loading from 0x8400\n\r");
++#endif /* CFG_DEBUG */
++
++#ifdef CFG_SDRAM
++ /* Initialize the matrix */
++ writel(readl(AT91C_BASE_CCFG + CCFG_EBICSA) | AT91C_EBI_CS1A_SDRAMC, AT91C_BASE_CCFG + CCFG_EBICSA);
++
++ /* Configure SDRAM Controller */
++
++#define HYNIX
++
++//#define MICRON
++#ifdef MICRON
++#define MICRON_REFRESH 1420 /* 15.625 us / 11 ns @ 180 Mhz*/
++ sdram_init( AT91C_SDRAMC_NC_9 |
++ AT91C_SDRAMC_NR_12 |
++ AT91C_SDRAMC_CAS_2 |
++ AT91C_SDRAMC_NB_4_BANKS |
++ AT91C_SDRAMC_DBW_32_BITS |
++ AT91C_SDRAMC_TWR_2 | // 1 CLK+7ns
++ AT91C_SDRAMC_TRC_7 | // 60 ns
++ AT91C_SDRAMC_TRP_3 | // 15 ns
++ AT91C_SDRAMC_TRCD_3 | // 15 ns
++ AT91C_SDRAMC_TRAS_7 | // 37-120 ns
++ AT91C_SDRAMC_TXSR_7, /* 67ns */ /* Control Register */
++ /* 600 700 735 */ MICRON_REFRESH /* 740 1536*/ ); /* Refresh Timer Register */
++
++#endif
++/*
++HY57V561620BT-H
++ *CAS lat *tRCD *tRAS *tRC *tRP tAC tOH
++133 2 2 6 8 2 5.4ns 2.7ns
++125 3 3 6 9 3 6ns 3ns
++100 2 2 5 7 2 6ns 3ns
++
++*/
++#ifdef HYNIX
++#if defined(PLLA_180MHz)
++/* CLK= 11ns */
++/* TWR = tDPL = 2 2CLK always */
++/* TRC = tRC = 65ns = 6 clk */
++/* TRP = tRP = 20ns = 2 clk */
++/* TRCD = tRCD = 20ns = 2 clk */
++/* TRAS = tRAS = 45ns = 5 clk */
++/* TXSR = tRRC = 65ns = 6 clk */
++
++ sdram_init( AT91C_SDRAMC_NC_9 |
++ AT91C_SDRAMC_NR_13 |
++ AT91C_SDRAMC_CAS_2 |
++ AT91C_SDRAMC_NB_4_BANKS |
++ AT91C_SDRAMC_DBW_32_BITS |
++ AT91C_SDRAMC_TWR_2 |
++ AT91C_SDRAMC_TRC_6 | /* *7 */
++ AT91C_SDRAMC_TRP_2 |
++ AT91C_SDRAMC_TRCD_2 |
++ AT91C_SDRAMC_TRAS_5 | /* *5 */
++ AT91C_SDRAMC_TXSR_6, /* *8 */ /* Control Register */
++ 710); /* Refresh Timer Register */
++
++#elif defined(PLLA_120MHz)
++/* CLK= 16ns, MCLK=60MHz */
++/* TWR = tDPL = 2 2CLK always */
++/* TRC = tRC = 65ns = 4 clk */
++/* TRP = tRP = 20ns = 2 clk */
++/* TRCD = tRCD = 20ns = 2 clk */
++/* TRAS = tRAS = 45ns = 3 clk */
++/* TXSR = tRRC = 65ns = 4 clk */
++
++ sdram_init( AT91C_SDRAMC_NC_9 |
++ AT91C_SDRAMC_NR_13 |
++ AT91C_SDRAMC_CAS_2 |
++ AT91C_SDRAMC_NB_4_BANKS |
++ AT91C_SDRAMC_DBW_32_BITS |
++ AT91C_SDRAMC_TWR_2 |
++ AT91C_SDRAMC_TRC_4 |
++ AT91C_SDRAMC_TRP_2 |
++ AT91C_SDRAMC_TRCD_2 |
++ AT91C_SDRAMC_TRAS_3 | /* *5 */
++ AT91C_SDRAMC_TXSR_4, /* *8 */ /* Control Register */
++ 1032); /* Refresh Timer Register */
++#else
++#error define PLLA180MHz
++#endif
++#endif /* HYNIX */
++#endif /* CFG_SDRAM */
++
++#ifdef CFG_FLASH
++ flash_hw_init();
++#endif
++ nandflash_hw_init();
++}
++#endif /* CFG_HW_INIT */
++
++#ifdef CFG_SDRAM
++/*------------------------------------------------------------------------------*/
++/* \fn sdramc_hw_init */
++/* \brief This function performs SDRAMC HW initialization */
++/*------------------------------------------------------------------------------*/
++void sdramc_hw_init(void)
++{
++ writel(0xFFFF0000, AT91C_BASE_PIOC + PIO_ASR(0));
++ writel(0xFFFF0000, AT91C_BASE_PIOC + PIO_PDR(0));
++
++}
++#endif /* CFG_SDRAM */
++
++#ifdef CFG_DATAFLASH
++
++/*------------------------------------------------------------------------------*/
++/* \fn df_hw_init */
++/* \brief This function performs DataFlash HW initialization */
++/*------------------------------------------------------------------------------*/
++void df_hw_init(void)
++{
++ writel(0xf, 0xfffff444);
++ writel(0xf, 0xfffff460);
++ writel(0xf, 0xfffff470);
++ writel(0xf, 0xfffff404);
++ writel(1 << 11, AT91C_BASE_PIOC + PIO_BSR(0));
++ writel(1 << 11, AT91C_BASE_PIOC + PIO_PDR(0));
++}
++#endif /* CFG_DATAFLASH */
++
+diff --git a/board/afeb9260/old/afeb9260.mk b/board/afeb9260/old/afeb9260.mk
+new file mode 100644
+index 0000000..88c2f64
+--- /dev/null
++++ b/board/afeb9260/old/afeb9260.mk
+@@ -0,0 +1,8 @@
++# Target name (case sensitive!!!)
++TARGET=AFEB9260
++# Board name (case sensitive!!!)
++BOARD=afeb9260
++# Link Address and Top_of_Memory
++LINK_ADDR=0x200000
++TOP_OF_MEMORY=0x301000
++
+diff --git a/board/afeb9260/old/dataflash/afeb9260.h b/board/afeb9260/old/dataflash/afeb9260.h
+new file mode 100644
+index 0000000..8e60faa
+--- /dev/null
++++ b/board/afeb9260/old/dataflash/afeb9260.h
+@@ -0,0 +1,127 @@
++/* ----------------------------------------------------------------------------
++ * ATMEL Microcontroller Software Support - ROUSSET -
++ * ----------------------------------------------------------------------------
++ * Copyright (c) 2006, Atmel Corporation
++
++ * All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions are met:
++ *
++ * - Redistributions of source code must retain the above copyright notice,
++ * this list of conditions and the disclaiimer below.
++ *
++ * - Redistributions in binary form must reproduce the above copyright notice,
++ * this list of conditions and the disclaimer below in the documentation and/or
++ * other materials provided with the distribution.
++ *
++ * Atmel's name may not be used to endorse or promote products derived from
++ * this software without specific prior written permission.
++ *
++ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
++ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
++ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
++ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
++ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
++ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
++ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ * ----------------------------------------------------------------------------
++ * File Name : at91sam9260ek.h
++ * Object :
++ * Creation : NLe Jul 13th 2006
++ *-----------------------------------------------------------------------------
++ */
++#ifndef _AFEB9260_H
++#define _AFEB9260_H
++#include "spi.h"
++#include "pll.h"
++
++/* ******************************************************************* */
++/* DataFlash Settings */
++/* */
++/* ******************************************************************* */
++#define AT91C_BASE_SPI AT91C_BASE_SPI0
++#define AT91C_ID_SPI AT91C_ID_SPI0
++
++/* SPI CLOCK */
++#define AT91C_SPI_CLK 5000000
++/* AC characteristics */
++/* DLYBS = tCSS= 250ns min and DLYBCT = tCSH = 250ns */
++#define DATAFLASH_TCSS (0x1a << 16) /* 250ns min (tCSS) <=> 12/48000000 = 250ns */
++#define DATAFLASH_TCHS (0x1 << 24) /* 250ns min (tCSH) <=> (64*1+SCBR)/(2*48000000) */
++
++#define DF_CS_SETTINGS ((SPI_MODE) | (AT91C_SPI_DLYBS & DATAFLASH_TCSS) | (AT91C_SPI_DLYBCT & DATAFLASH_TCHS) | ((MASTER_CLOCK / AT91C_SPI_CLK) << 8))
++
++
++/* ******************************************************************* */
++/* BootStrap Settings */
++/* */
++/* ******************************************************************* */
++#define MACH_TYPE 0x44B /* AT91SAM9260-EK */
++
++#define IMG_ADDRESS 0x8400 /* Image Address in DataFlash */
++
++#if defined(IMG_SIZE)
++#warning "IMG_SIZE redefined"
++#else
++#define IMG_SIZE 0x39000 /* Image Size in DataFlash */
++#endif
++
++#if defined(JUMP_ADDR)
++#warning "JUMP_ADDR redefined"
++#else
++#define JUMP_ADDR 0x21F00000 /* Final Jump Address */
++#endif
++
++/* ******************************************************************* */
++/* NandFlash Settings */
++/* */
++/* ******************************************************************* */
++#define AT91C_SMARTMEDIA_BASE 0x40000000
++
++#define AT91_SMART_MEDIA_ALE (1 << 21) /* our ALE is AD21 */
++#define AT91_SMART_MEDIA_CLE (1 << 22) /* our CLE is AD22 */
++
++#define NAND_DISABLE_CE() do { *(volatile unsigned int *)AT91C_PIOC_SODR = AT91C_PIO_PC14;} while(0)
++#define NAND_ENABLE_CE() do { *(volatile unsigned int *)AT91C_PIOC_CODR = AT91C_PIO_PC14;} while(0)
++
++#define NAND_WAIT_READY() while (!(*(volatile unsigned int *)AT91C_PIOC_PDSR & AT91C_PIO_PC13))
++
++
++/* ******************************************************************** */
++/* SMC Chip Select 3 Timings for NandFlash for MASTER_CLOCK = 100000000.*/
++/* Micron 16bits 256Mb for MASTER_CLOCK = 100000000. */
++/* Please refer to SMC section in AT91SAM9261 datasheet to learn how */
++/* to generate these values. */
++/* ******************************************************************** */
++
++#define AT91C_SM_NWE_SETUP (2 << 0)
++#define AT91C_SM_NCS_WR_SETUP (2 << 8)
++#define AT91C_SM_NRD_SETUP (2 << 16)
++#define AT91C_SM_NCS_RD_SETUP (2 << 24)
++
++#define AT91C_SM_NWE_PULSE (4 << 0)
++#define AT91C_SM_NCS_WR_PULSE (4 << 8)
++#define AT91C_SM_NRD_PULSE (4 << 16)
++#define AT91C_SM_NCS_RD_PULSE (4 << 24)
++
++#define AT91C_SM_NWE_CYCLE (8 << 0)
++#define AT91C_SM_NRD_CYCLE (8 << 16)
++
++#define AT91C_SM_TDF (2 << 16)
++
++
++
++/* ******************************************************************* */
++/* Application Settings */
++/* ******************************************************************* */
++#define CFG_DEBUG
++#define CFG_DATAFLASH
++#define CFG_SDRAM
++#define CFG_HW_INIT
++
++
++#endif /* _AT91SAM9260EK_H */
+diff --git a/board/afeb9260/old/nandflash/afeb9260ek.h b/board/afeb9260/old/nandflash/afeb9260ek.h
+new file mode 100644
+index 0000000..752ae0a
+--- /dev/null
++++ b/board/afeb9260/old/nandflash/afeb9260ek.h
+@@ -0,0 +1,151 @@
++/* ----------------------------------------------------------------------------
++ * ATMEL Microcontroller Software Support - ROUSSET -
++ * ----------------------------------------------------------------------------
++ * Copyright (c) 2006, Atmel Corporation
++
++ * All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions are met:
++ *
++ * - Redistributions of source code must retain the above copyright notice,
++ * this list of conditions and the disclaimer below.
++ *
++ * - Redistributions in binary form must reproduce the above copyright notice,
++ * this list of conditions and the disclaimer below in the documentation and/or
++ * other materials provided with the distribution.
++ *
++ * Atmel's name may not be used to endorse or promote products derived from
++ * this software without specific prior written permission.
++ *
++ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
++ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
++ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
++ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
++ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
++ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
++ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ * ----------------------------------------------------------------------------
++ * File Name : at91sam9260ek.h
++ * Object :
++ * Creation : NLe Sep 28th 2006
++ *-----------------------------------------------------------------------------
++ */
++#ifndef _AFEB9260_H
++#define _AFEB9260_H
++#include "spi.h"
++#include "pll.h"
++
++/* ******************************************************************* */
++/* DataFlash Settings */
++/* */
++/* ******************************************************************* */
++#define AT91C_BASE_SPI AT91C_BASE_SPI0
++#define AT91C_ID_SPI AT91C_ID_SPI0
++
++/* SPI CLOCK */
++#define AT91C_SPI_CLK 5000000
++/* AC characteristics */
++/* DLYBS = tCSS= 250ns min and DLYBCT = tCSH = 250ns */
++#define DATAFLASH_TCSS (0x1a << 16) /* 250ns min (tCSS) <=> 12/48000000 = 250ns */
++#define DATAFLASH_TCHS (0x1 << 24) /* 250ns min (tCSH) <=> (64*1+SCBR)/(2*48000000) */
++
++#define DF_CS_SETTINGS ((SPI_MODE) | (AT91C_SPI_DLYBS & DATAFLASH_TCSS) | (AT91C_SPI_DLYBCT & DATAFLASH_TCHS) | ((MASTER_CLOCK / AT91C_SPI_CLK) << 8))
++
++
++/* ******************************************************************* */
++/* NandFlash Settings */
++/* */
++/* ******************************************************************* */
++#define AT91C_SMARTMEDIA_BASE 0x40000000
++
++#define AT91_SMART_MEDIA_ALE (1 << 21) /* our ALE is AD21 */
++#define AT91_SMART_MEDIA_CLE (1 << 22) /* our CLE is AD22 */
++
++#define NAND_DISABLE_CE() do { *(volatile unsigned int *)AT91C_PIOC_SODR = AT91C_PIO_PC14;} while(0)
++#define NAND_ENABLE_CE() do { *(volatile unsigned int *)AT91C_PIOC_CODR = AT91C_PIO_PC14;} while(0)
++
++#define NAND_WAIT_READY() while (!(*(volatile unsigned int *)AT91C_PIOC_PDSR & AT91C_PIO_PC13))
++
++
++/* ******************************************************************** */
++/* SMC Chip Select 3 Timings for NandFlash for MASTER_CLOCK = 100000000.*/
++/* Micron 16bits 256Mb for MASTER_CLOCK = 100000000. */
++/* Please refer to SMC section in AT91SAM9261 datasheet to learn how */
++/* to generate these values. */
++/* ******************************************************************** */
++
++#define AT91C_SM_NWE_SETUP (2 << 0)
++#define AT91C_SM_NCS_WR_SETUP (2 << 8)
++#define AT91C_SM_NRD_SETUP (2 << 16)
++#define AT91C_SM_NCS_RD_SETUP (2 << 24)
++
++#define AT91C_SM_NWE_PULSE (4 << 0)
++#define AT91C_SM_NCS_WR_PULSE (4 << 8)
++#define AT91C_SM_NRD_PULSE (4 << 16)
++#define AT91C_SM_NCS_RD_PULSE (4 << 24)
++
++#define AT91C_SM_NWE_CYCLE (8 << 0)
++#define AT91C_SM_NRD_CYCLE (8 << 16)
++
++#define AT91C_SM_TDF (2 << 16)
++
++
++/* ******************************************************************** */
++/* SMC Chip Select 3 Timings for NandFlash for MASTER_CLOCK = 100000000.*/
++/* Micron 16bits 256Mb for MASTER_CLOCK = 100000000. */
++/* Please refer to SMC section in AT91SAM9261 datasheet to learn how */
++/* to generate these values. */
++/* ******************************************************************** */
++/*#define AT91C_SM_NWE_SETUP (0 << 0)
++#define AT91C_SM_NCS_WR_SETUP (0 << 8)
++#define AT91C_SM_NRD_SETUP (0 << 16)
++#define AT91C_SM_NCS_RD_SETUP (0 << 24)
++
++#define AT91C_SM_NWE_PULSE (2 << 0)
++#define AT91C_SM_NCS_WR_PULSE (3 << 8)
++#define AT91C_SM_NRD_PULSE (2 << 16)
++#define AT91C_SM_NCS_RD_PULSE (3 << 24)
++
++#define AT91C_SM_NWE_CYCLE (3 << 0)
++#define AT91C_SM_NRD_CYCLE (3 << 16)
++
++#define AT91C_SM_TDF (1 << 16)
++*/
++
++/* ******************************************************************* */
++/* BootStrap Settings */
++/* */
++/* ******************************************************************* */
++#define MACH_TYPE 0x44B /* AT91SAM9260-EK */
++
++#define IMG_ADDRESS 0x20000 /* Image Address in NandFlash */
++
++#if defined(IMG_SIZE)
++#warning "IMG_SIZE redefined"
++#else
++#define IMG_SIZE 0x30000 /* Image Size in NandFlash */
++#endif
++
++#if defined(JUMP_ADDR)
++#warning "JUMP_ADDR redefined"
++#else
++#define JUMP_ADDR 0x23F00000 /* Final Jump Address */
++#endif
++
++/* ******************************************************************* */
++/* Application Settings */
++/* ******************************************************************* */
++#define CFG_DEBUG
++#undef CFG_DATAFLASH
++
++#define CFG_NANDFLASH
++#undef NANDFLASH_SMALL_BLOCKS /* NANDFLASH_LARGE_BLOCKS used instead */
++
++#define CFG_HW_INIT
++#define CFG_SDRAM
++
++#endif /* _AT91SAM9260EK_H */
+diff --git a/board/afeb9260/old/pll.h b/board/afeb9260/old/pll.h
+new file mode 100644
+index 0000000..6d20299
+--- /dev/null
++++ b/board/afeb9260/old/pll.h
+@@ -0,0 +1,35 @@
++/* ******************************************************************* */
++/* PMC Settings */
++/* */
++/* The main oscillator is enabled as soon as possible in the c_startup */
++/* and MCK is switched on the main oscillator. */
++/* PLL initialization is done later in the hw_init() function */
++/* ******************************************************************* */
++#define PLL_LOCK_TIMEOUT 1000000
++
++#define PLLA_180MHz
++
++#ifdef PLLA_200MHz
++#define PLLA_SETTINGS 0x2060BF09
++#define MASTER_CLOCK (198656000/2)
++#endif
++
++#ifdef PLLA_180MHz
++#define PLLA_SETTINGS 0x2125BF1E /* 180MHz */
++#define MASTER_CLOCK (179999198/2) /* 180MHz MCK=90MHz */
++#endif
++
++#ifdef PLLA_120MHz
++//#define PLLA_SETTINGS 0x2125BF2d /* 120MHz */
++//#define MASTER_CLOCK (119999322) /* 120MHz MCK=60MHz*/
++#define PLLA_SETTINGS 0x2125BF2d /* 120MHz */
++#define MASTER_CLOCK (119999465/2) /* 120MHz MCK=60MHz*/
++#endif
++
++#if !defined(PLLA_180MHz) && !defined(PLLA_120MHz)
++#error Define PLLA frequency
++#endif
++#define PLLB_SETTINGS 0x10483F0E
++
++/* Switch MCK on PLLA output PCK = PLLA = 2 * MCK */
++#define MCKR_SETTINGS (AT91C_PMC_CSS_PLLA_CLK | AT91C_PMC_PRES_CLK | AT91C_PMC_MDIV_2)
+diff --git a/board/board_cpp.mk b/board/board_cpp.mk
+index 9b91909..dd64467 100644
+--- a/board/board_cpp.mk
++++ b/board/board_cpp.mk
+@@ -1,4 +1,13 @@
+
++ifeq ($(CONFIG_AFEB9260),y)
++CPPFLAGS += -DCONFIG_AFEB9260
++ASFLAGS += -DCONFIG_AFEB9260
++endif
++
++ifeq ($(CONFIG_THUMB),y)
++CPPFLAGS += -mthumb -mthumb-interwork
++ASFLAGS += -DCONFIG_AFEB9260 -mthumb -mthumb-interwork
++endif
+
+ CPPFLAGS += \
+ -D$(CHIP) \
+@@ -35,6 +44,14 @@ endif
+
+ # CPU clock
+
++ifeq ($(CONFIG_CPU_CLK_180MHZ),y)
++CPPFLAGS += -DCONFIG_CPU_CLK_180MHZ
++endif
++
++ifeq ($(CONFIG_CPU_CLK_166MHZ),y)
++CPPFLAGS += -DCONFIG_CPU_CLK_166MHZ
++endif
++
+ ifeq ($(CONFIG_CPU_CLK_200MHZ),y)
+ CPPFLAGS += -DCONFIG_CPU_CLK_200MHZ
+ endif
+@@ -53,6 +70,14 @@ endif
+
+ # Bus speed
+
++ifeq ($(CONFIG_BUS_SPEED_83MHZ),y)
++CPPFLAGS += -DCONFIG_BUS_SPEED_83MHZ
++endif
++
++ifeq ($(CONFIG_BUS_SPEED_90MHZ),y)
++CPPFLAGS += -DCONFIG_BUS_SPEED_90MHZ
++endif
++
+ ifeq ($(CONFIG_BUS_SPEED_100MHZ),y)
+ CPPFLAGS += -DCONFIG_BUS_SPEED_100MHZ
+ endif
+diff --git a/driver/Config.in.dataflash b/driver/Config.in.dataflash
+index 7853bc3..22367da 100644
+--- a/driver/Config.in.dataflash
++++ b/driver/Config.in.dataflash
+@@ -24,7 +24,7 @@ config CONFIG_SPI_BOOT_CS0
+ config CONFIG_SPI_BOOT_CS1
+ bool "Boot from chip select 1"
+ depends on CONFIG_DATAFLASH
+- depends on CONFIG_AT91SAM9260EK || CONFIG_AT91SAM9G20EK || CONFIG_AT91SAM9XEEK
++ depends on CONFIG_AT91SAM9260EK || CONFIG_AT91SAM9G20EK || CONFIG_AT91SAM9XEEK || CONFIG_AFEB9260
+
+ endchoice
+
+diff --git a/driver/dataflash.c b/driver/dataflash.c
+index 43e2816..2619222 100644
+--- a/driver/dataflash.c
++++ b/driver/dataflash.c
+@@ -533,7 +533,7 @@ int load_df(unsigned int pcs, unsigned int img_addr, unsigned int img_size, unsi
+ if (df_init(pDf) == FAILURE)
+ return FAILURE;
+
+-#if defined(AT91SAM9260) || defined(AT91SAM9XE) || defined(AT91SAM9G20)
++#if !defined(CONFIG_AFEB9260) && (defined(AT91SAM9260) || defined(AT91SAM9XE) || defined(AT91SAM9G20))
+ /* Test if a button has been pressed or not */
+ /* Erase Page 0 to avoid infinite loop */
+ df_recovery(pDf);
+diff --git a/include/part.h b/include/part.h
+index 39f1f2f..a5c30a6 100644
+--- a/include/part.h
++++ b/include/part.h
+@@ -39,9 +39,15 @@
+
+ #ifdef AT91SAM9260
+ #include "AT91SAM9260_inc.h"
++
++#ifdef CONFIG_AFEB9260
++#include "afeb9260.h"
++#else
+ #include "at91sam9260ek.h"
+ #endif
+
++#endif
++
+ #ifdef AT91SAM9XE
+ /* For all SAM9XE chips 128/256/512/.. we use the XE128 file */
+ #include "AT91SAM9XE128_inc.h"
+--
+1.5.6.5
+
diff --git a/recipes/at91bootstrap/at91bootstrap-2.11/afeb9260-166/defconfig b/recipes/at91bootstrap/at91bootstrap-2.11/afeb9260-166/defconfig
new file mode 100644
index 0000000000..bf8b6f9079
--- /dev/null
+++ b/recipes/at91bootstrap/at91bootstrap-2.11/afeb9260-166/defconfig
@@ -0,0 +1,94 @@
+#
+# Automatically generated make config: don't edit
+# Sun May 10 01:26:05 2009
+#
+HAVE_DOT_CONFIG=y
+CONFIG_BOARDNAME="afeb9260"
+# CONFIG_AT91SAM9260EK is not set
+# CONFIG_AT91SAM9261EK is not set
+# CONFIG_AT91SAM9263EK is not set
+# CONFIG_AT91SAM9RLEK is not set
+# CONFIG_AT91SAM9XEEK is not set
+# CONFIG_AT91SAM9G20EK is not set
+# CONFIG_AT91CAP9ADK is not set
+CONFIG_AFEB9260=y
+CONFIG_CHIP="AT91SAM9260"
+CONFIG_BOARD="afeb9260"
+CONFIG_MACH_TYPE="1859"
+CONFIG_LINK_ADDR="0x200000"
+CONFIG_TOP_OF_MEMORY="0x301000"
+CONFIG_BOOTSTRAP_MAXSIZE="4096"
+# CONFIG_CRYSTAL_12_000MHZ is not set
+# CONFIG_CRYSTAL_16_000MHZ is not set
+# CONFIG_CRYSTAL_16_36766MHZ is not set
+CONFIG_CRYSTAL_18_432MHZ=y
+ALLOW_CRYSTAL_18_432MHZ=y
+CONFIG_CRYSTAL="CRYSTAL_18_432MHZ"
+CONFIG_CPU_CLK_166MHZ=y
+# CONFIG_CPU_CLK_180MHZ is not set
+# CONFIG_CPU_CLK_200MHZ is not set
+# CONFIG_CPU_CLK_240MHZ is not set
+# CONFIG_CPU_CLK_266MHZ is not set
+# CONFIG_CPU_CLK_400MHZ is not set
+ALLOW_CPU_CLK_166MHZ=y
+ALLOW_CPU_CLK_180MHZ=y
+# DISABLE_CPU_CLK_240MHZ is not set
+CONFIG_BUS_SPEED_83MHZ=y
+# CONFIG_BUS_SPEED_90MHZ is not set
+# CONFIG_BUS_SPEED_100MHZ is not set
+# CONFIG_BUS_SPEED_133MHZ is not set
+
+#
+# Memory selection
+#
+CONFIG_SDRAM=y
+# CONFIG_SDDRC is not set
+# CONFIG_DDR2 is not set
+ALLOW_DATAFLASH=y
+# ALLOW_FLASH is not set
+ALLOW_NANDFLASH=y
+# ALLOW_SDCARD is not set
+# ALLOW_PSRAM is not set
+# ALLOW_SDRAM_16BIT is not set
+# CONFIG_RAM_32MB is not set
+CONFIG_RAM_64MB=y
+# CONFIG_RAM_128MB is not set
+# CONFIG_RAM_256MB is not set
+CONFIG_DATAFLASH=y
+# CONFIG_FLASH is not set
+# CONFIG_NANDFLASH is not set
+# CONFIG_SDCARD is not set
+CONFIG_MEMORY="dataflash"
+
+#
+# SPI configuration
+#
+CONFIG_SPI_CLK=33000000
+# CONFIG_SPI_BOOT_CS0 is not set
+CONFIG_SPI_BOOT_CS1=y
+# DATAFLASHCARD_ON_CS0 is not set
+# DATAFLASHCARD_ON_CS1 is not set
+# DATAFLASHCARD_ON_CS2 is not set
+# DATAFLASHCARD_ON_CS3 is not set
+# CONFIG_DATAFLASHCARD is not set
+CONFIG_CARD_SUFFIX=""
+CONFIG_SPI_BOOT="AT91C_SPI_PCS1_DATAFLASH"
+CONFIG_SPI_MODE_0=y
+# CONFIG_SPI_MODE_1 is not set
+# CONFIG_SPI_MODE_2 is not set
+# CONFIG_SPI_MODE_3 is not set
+CONFIG_SPI_MODE=0
+CONFIG_PROJECT="dataflash"
+CONFIG_LOAD_UBOOT=y
+# CONFIG_LOAD_64KB is not set
+# CONFIG_LOAD_1MB is not set
+# CONFIG_LOAD_4MB is not set
+CONFIG_IMG_ADDRESS="0x00008400"
+CONFIG_IMG_SIZE="0x00040000"
+CONFIG_JUMP_ADDR="0x23F00000"
+CONFIG_APP_CHECK=y
+# CONFIG_LONG_TEST is not set
+CONFIG_DEBUG=y
+CONFIG_HW_INIT=y
+# CONFIG_USER_HW_INIT is not set
+CONFIG_THUMB=y