merge of 23591ab9c5cec77ee5fa2447257a15baa7a8182d

     and 53e14a99825447107bfefacf77e28b5718be54b8

14 files changed, 727 insertions, 500 deletions

diff --git a/packages/binutils/binutils-2.16.91.0.6/.mtn2git_empty b/packages/binutils/binutils-2.16.91.0.6/.mtn2git_empty
new file mode 100644
index 0000000000..e69de29bb2
--- /dev/null
+++ b/packages/binutils/binutils-2.16.91.0.6/.mtn2git_empty
diff --git a/packages/binutils/binutils-2.16.91.0.6/binutils-2.16.91.0.6-objcopy-rename-errorcode.patch b/packages/binutils/binutils-2.16.91.0.6/binutils-2.16.91.0.6-objcopy-rename-errorcode.patch
new file mode 100644
index 0000000000..4461bedd4e
--- /dev/null
+++ b/packages/binutils/binutils-2.16.91.0.6/binutils-2.16.91.0.6-objcopy-rename-errorcode.patch
@@ -0,0 +1,31 @@
+# strip (and objcopy) fail to set the error code if there is no
+# output file name and the rename of the stripped (or copied) file
+# fails, yet the command fails to do anything.  This fixes both
+# objcopy and strip.
+#
+# modification by bero: Ported to 2.16.91.0.6
+#
+#Signed-off-by: John Bowler <jbowler@acm.org>
+#Signed-off-by: Bernhard Rosenkraenzer <bero@arklinux.org>
+--- binutils-2.16.91.0.6/binutils/objcopy.c.ark	2006-03-11 15:59:07.000000000 +0100
++++ binutils-2.16.91.0.6/binutils/objcopy.c	2006-03-11 15:59:45.000000000 +0100
+@@ -2593,7 +2593,8 @@
+ 	  if (preserve_dates)
+ 	    set_times (tmpname, &statbuf);
+ 	  if (output_file == NULL)
+-	    smart_rename (tmpname, argv[i], preserve_dates);
++	    if(smart_rename (tmpname, argv[i], preserve_dates))
++              hold_status = 1;
+ 	  status = hold_status;
+ 	}
+       else
+@@ -3184,7 +3185,8 @@
+ 	{
+ 	  if (preserve_dates)
+ 	    set_times (tmpname, &statbuf);
+-	  smart_rename (tmpname, input_filename, preserve_dates);
++	  if (smart_rename (tmpname, input_filename, preserve_dates))
++            status = 1;
+ 	}
+       else
+ 	unlink (tmpname);
diff --git a/packages/binutils/binutils-2.16.91.0.6/binutils-uclibc-100-uclibc-conf.patch b/packages/binutils/binutils-2.16.91.0.6/binutils-uclibc-100-uclibc-conf.patch
new file mode 100644
index 0000000000..85fc30930e
--- /dev/null
+++ b/packages/binutils/binutils-2.16.91.0.6/binutils-uclibc-100-uclibc-conf.patch
@@ -0,0 +1,230 @@
+diff -Nurp binutils-2.16.91.0.2.orig/bfd/configure binutils-2.16.91.0.2/bfd/configure
+--- binutils-2.16.91.0.2.orig/bfd/configure	2005-07-20 15:27:27.000000000 -0400
++++ binutils-2.16.91.0.2/bfd/configure	2005-08-02 00:17:47.000000000 -0400
+@@ -3585,6 +3585,11 @@ linux-gnu*)
+   lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
+   ;;
+ 
++linux-uclibc*)
++  lt_cv_deplibs_check_method=pass_all
++  lt_cv_file_magic_test_file=`echo /lib/libuClibc-*.so`
++  ;;
++
+ netbsd* | knetbsd*-gnu)
+   if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
+     lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$'
+diff -Nurp binutils-2.16.91.0.2.orig/binutils/configure binutils-2.16.91.0.2/binutils/configure
+--- binutils-2.16.91.0.2.orig/binutils/configure	2005-07-20 15:27:27.000000000 -0400
++++ binutils-2.16.91.0.2/binutils/configure	2005-08-02 00:17:47.000000000 -0400
+@@ -3420,6 +3420,11 @@ linux-gnu*)
+   lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
+   ;;
+ 
++linux-uclibc*)
++  lt_cv_deplibs_check_method=pass_all
++  lt_cv_file_magic_test_file=`echo /lib/libuClibc-*.so`
++  ;;
++
+ netbsd* | knetbsd*-gnu)
+   if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
+     lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$'
+diff -Nurp binutils-2.16.91.0.2.orig/configure binutils-2.16.91.0.2/configure
+--- binutils-2.16.91.0.2.orig/configure	2005-07-20 15:27:26.000000000 -0400
++++ binutils-2.16.91.0.2/configure	2005-08-02 00:17:47.000000000 -0400
+@@ -1130,7 +1130,7 @@ no)
+     ;;
+ "")
+     case "${target}" in
+-    *-*-linux*-gnu | *-*-gnu* | *-*-k*bsd*-gnu)
++    *-*-linux*-gnu | *-*-gnu* | *-*-k*bsd*-gnu | *-*-linux-uclibc*)
+         # Enable libmudflap by default in GNU and friends.
+ 	;;
+     *-*-freebsd*)
+@@ -1235,7 +1235,7 @@ case "${target}" in
+   am33_2.0-*-linux*)
+     noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss"
+     ;;
+-  sh-*-linux*)
++  sh*-*-linux*)
+     noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss"
+     ;;    
+   sh*-*-pe|mips*-*-pe|*arm-wince-pe)
+@@ -1530,7 +1530,7 @@ case "${target}" in
+   romp-*-*)
+     noconfigdirs="$noconfigdirs bfd binutils ld gas opcodes target-libgloss ${libgcj}"
+     ;;
+-  sh-*-* | sh64-*-*)
++  sh*-*-* | sh64-*-*)
+     case "${host}" in
+       i[3456789]86-*-vsta) ;; # don't add gprof back in
+       i[3456789]86-*-go32*) ;; # don't add gprof back in
+diff -Nurp binutils-2.16.91.0.2.orig/configure.in binutils-2.16.91.0.2/configure.in
+--- binutils-2.16.91.0.2.orig/configure.in	2005-07-20 15:27:26.000000000 -0400
++++ binutils-2.16.91.0.2/configure.in	2005-08-02 00:17:47.000000000 -0400
+@@ -341,7 +341,7 @@ no)
+     ;;
+ "")
+     case "${target}" in
+-    *-*-linux*-gnu | *-*-gnu* | *-*-k*bsd*-gnu)
++    *-*-linux*-gnu | *-*-gnu* | *-*-k*bsd*-gnu | *-*-linux-uclibc*)
+         # Enable libmudflap by default in GNU and friends.
+ 	;;
+     *-*-freebsd*)
+@@ -446,7 +446,7 @@ case "${target}" in
+   am33_2.0-*-linux*)
+     noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss"
+     ;;
+-  sh-*-linux*)
++  sh*-*-linux*)
+     noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss"
+     ;;    
+   sh*-*-pe|mips*-*-pe|*arm-wince-pe)
+@@ -741,7 +741,7 @@ case "${target}" in
+   romp-*-*)
+     noconfigdirs="$noconfigdirs bfd binutils ld gas opcodes target-libgloss ${libgcj}"
+     ;;
+-  sh-*-* | sh64-*-*)
++  sh*-*-* | sh64-*-*)
+     case "${host}" in
+       i[[3456789]]86-*-vsta) ;; # don't add gprof back in
+       i[[3456789]]86-*-go32*) ;; # don't add gprof back in
+diff -Nurp binutils-2.16.91.0.2.orig/gas/configure binutils-2.16.91.0.2/gas/configure
+--- binutils-2.16.91.0.2.orig/gas/configure	2005-07-20 15:27:27.000000000 -0400
++++ binutils-2.16.91.0.2/gas/configure	2005-08-02 00:17:47.000000000 -0400
+@@ -3421,6 +3421,11 @@ linux-gnu*)
+   lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
+   ;;
+ 
++linux-uclibc*)
++  lt_cv_deplibs_check_method=pass_all
++  lt_cv_file_magic_test_file=`echo /lib/libuClibc-*.so`
++  ;;
++
+ netbsd* | knetbsd*-gnu)
+   if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
+     lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$'
+diff -Nurp binutils-2.16.91.0.2.orig/gprof/configure binutils-2.16.91.0.2/gprof/configure
+--- binutils-2.16.91.0.2.orig/gprof/configure	2005-04-29 13:50:29.000000000 -0400
++++ binutils-2.16.91.0.2/gprof/configure	2005-08-02 00:17:47.000000000 -0400
+@@ -3419,6 +3419,11 @@ linux-gnu*)
+   lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
+   ;;
+ 
++linux-uclibc*)
++  lt_cv_deplibs_check_method=pass_all
++  lt_cv_file_magic_test_file=`echo /lib/libuClibc-*.so`
++  ;;
++
+ netbsd* | knetbsd*-gnu)
+   if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
+     lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$'
+diff -Nurp binutils-2.16.91.0.2.orig/ld/configure binutils-2.16.91.0.2/ld/configure
+--- binutils-2.16.91.0.2.orig/ld/configure	2005-06-22 16:53:35.000000000 -0400
++++ binutils-2.16.91.0.2/ld/configure	2005-08-02 00:17:47.000000000 -0400
+@@ -3422,6 +3422,11 @@ linux-gnu*)
+   lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
+   ;;
+ 
++linux-uclibc*)
++  lt_cv_deplibs_check_method=pass_all
++  lt_cv_file_magic_test_file=`echo /lib/libuClibc-*.so`
++  ;;
++
+ netbsd* | knetbsd*-gnu)
+   if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
+     lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$'
+diff -Nurp binutils-2.16.91.0.2.orig/libtool.m4 binutils-2.16.91.0.2/libtool.m4
+--- binutils-2.16.91.0.2.orig/libtool.m4	2005-07-20 15:27:26.000000000 -0400
++++ binutils-2.16.91.0.2/libtool.m4	2005-08-02 00:17:47.000000000 -0400
+@@ -645,6 +645,11 @@ linux-gnu*)
+   lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
+   ;;
+ 
++linux-uclibc*)
++  lt_cv_deplibs_check_method=pass_all
++  lt_cv_file_magic_test_file=`echo /lib/libuClibc-*.so`
++  ;;
++
+ netbsd* | knetbsd*-gnu)
+   if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
+     [lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$']
+diff -Nurp binutils-2.16.91.0.2.orig/ltconfig binutils-2.16.91.0.2/ltconfig
+--- binutils-2.16.91.0.2.orig/ltconfig	2005-07-20 15:27:26.000000000 -0400
++++ binutils-2.16.91.0.2/ltconfig	2005-08-02 00:17:47.000000000 -0400
+@@ -602,6 +602,7 @@ host_os=`echo $host | sed 's/^\([^-]*\)-
+ 
+ # Transform linux* to *-*-linux-gnu*, to support old configure scripts.
+ case $host_os in
++linux-uclibc*) ;;
+ linux-gnu*) ;;
+ linux*) host=`echo $host | sed 's/^\(.*-.*-linux\)\(.*\)$/\1-gnu\2/'`
+ esac
+@@ -1270,6 +1271,23 @@ linux-gnu*)
+   dynamic_linker='GNU/Linux ld.so'
+   ;;
+ 
++linux-uclibc*)
++  version_type=linux
++  need_lib_prefix=no
++  need_version=no
++  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
++  soname_spec='${libname}${release}.so$major'
++  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
++  shlibpath_var=LD_LIBRARY_PATH
++  shlibpath_overrides_runpath=no
++  # This implies no fast_install, which is unacceptable.
++  # Some rework will be needed to allow for fast_install
++  # before this can be enabled.
++  hardcode_into_libs=yes
++  # Assume using the uClibc dynamic linker.
++  dynamic_linker="uClibc ld.so"
++  ;;
++
+ netbsd*)
+   need_lib_prefix=no
+   need_version=no
+diff -Nurp binutils-2.16.91.0.2.orig/opcodes/configure binutils-2.16.91.0.2/opcodes/configure
+--- binutils-2.16.91.0.2.orig/opcodes/configure	2005-07-20 15:27:28.000000000 -0400
++++ binutils-2.16.91.0.2/opcodes/configure	2005-08-02 00:17:47.000000000 -0400
+@@ -3588,6 +3588,11 @@ linux-gnu*)
+   lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
+   ;;
+ 
++linux-uclibc*)
++  lt_cv_deplibs_check_method=pass_all
++  lt_cv_file_magic_test_file=`echo /lib/libuClibc-*.so`
++  ;;
++
+ netbsd* | knetbsd*-gnu)
+   if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
+     lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$'
+diff -Nurp binutils-2.16.91.0.2.orig/config.sub binutils-2.16.91.0.2/config.sub
+--- binutils-2.16.91.0.2.orig/config.sub	2005-07-20 15:27:26.000000000 -0400
++++ binutils-2.16.91.0.2/config.sub	2005-08-02 00:18:58.000000000 -0400
+@@ -268,7 +268,7 @@ case $basic_machine in
+ 	| pdp10 | pdp11 | pj | pjl \
+ 	| powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \
+ 	| pyramid \
+-	| sh | sh[1234] | sh[24]a | sh[23]e | sh[34]eb | shbe | shle | sh[1234]le | sh3ele \
++	| sh | sh[1234]* | sh[24]a | sh[23]e | sh[34]eb | shbe | shle | sh[1234]le | sh3ele \
+ 	| sh64 | sh64le \
+ 	| sparc | sparc64 | sparc64b | sparc86x | sparclet | sparclite \
+ 	| sparcv8 | sparcv9 | sparcv9b \
+@@ -348,7 +348,7 @@ case $basic_machine in
+ 	| powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \
+ 	| pyramid-* \
+ 	| romp-* | rs6000-* \
+-	| sh-* | sh[1234]-* | sh[24]a-* | sh[23]e-* | sh[34]eb-* | shbe-* \
++	| sh-* | sh[1234]*-* | sh[24]a-* | sh[23]e-* | sh[34]eb-* | shbe-* \
+ 	| shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \
+ 	| sparc-* | sparc64-* | sparc64b-* | sparc86x-* | sparclet-* \
+ 	| sparclite-* \
+@@ -1102,7 +1102,7 @@ case $basic_machine in
+ 	we32k)
+ 		basic_machine=we32k-att
+ 		;;
+-	sh[1234] | sh[24]a | sh[34]eb | sh[1234]le | sh[23]ele)
++	sh[1234]* | sh[24]a | sh[34]eb | sh[1234]le | sh[23]ele)
+ 		basic_machine=sh-unknown
+ 		;;
+ 	sparc | sparcv8 | sparcv9 | sparcv9b)
diff --git a/packages/binutils/binutils-2.16.91.0.6/binutils-uclibc-300-001_ld_makefile_patch.patch b/packages/binutils/binutils-2.16.91.0.6/binutils-uclibc-300-001_ld_makefile_patch.patch
new file mode 100644
index 0000000000..04a7e61e25
--- /dev/null
+++ b/packages/binutils/binutils-2.16.91.0.6/binutils-uclibc-300-001_ld_makefile_patch.patch
@@ -0,0 +1,50 @@
+#!/bin/sh -e
+## 001_ld_makefile_patch.dpatch
+##
+## All lines beginning with `## DP:' are a description of the patch.
+## DP: Description: correct where ld scripts are installed
+## DP: Author: Chris Chimelis <chris@debian.org>
+## DP: Upstream status: N/A
+## DP: Date: ??
+
+if [ $# -ne 1 ]; then
+    echo >&2 "`basename $0`: script expects -patch|-unpatch as argument"
+    exit 1
+fi
+
+[ -f debian/patches/00patch-opts ] && . debian/patches/00patch-opts
+patch_opts="${patch_opts:--f --no-backup-if-mismatch}"
+
+case "$1" in
+       -patch) patch $patch_opts -p1 < $0;;
+       -unpatch) patch $patch_opts -p1 -R < $0;;
+        *)
+                echo >&2 "`basename $0`: script expects -patch|-unpatch as argument"
+                exit 1;;
+esac
+
+exit 0
+
+@DPATCH@
+--- binutils-2.16.91.0.1/ld/Makefile.am
++++ binutils-2.16.91.0.1/ld/Makefile.am
+@@ -20,7 +20,7 @@
+ # We put the scripts in the directory $(scriptdir)/ldscripts.
+ # We can't put the scripts in $(datadir) because the SEARCH_DIR
+ # directives need to be different for native and cross linkers.
+-scriptdir = $(tooldir)/lib
++scriptdir = $(libdir)
+ 
+ EMUL = @EMUL@
+ EMULATION_OFILES = @EMULATION_OFILES@
+--- binutils-2.16.91.0.1/ld/Makefile.in
++++ binutils-2.16.91.0.1/ld/Makefile.in
+@@ -268,7 +268,7 @@
+ # We put the scripts in the directory $(scriptdir)/ldscripts.
+ # We can't put the scripts in $(datadir) because the SEARCH_DIR
+ # directives need to be different for native and cross linkers.
+-scriptdir = $(tooldir)/lib
++scriptdir = $(libdir)
+ BASEDIR = $(srcdir)/..
+ BFDDIR = $(BASEDIR)/bfd
+ INCDIR = $(BASEDIR)/include
diff --git a/packages/binutils/binutils-2.16.91.0.6/binutils-uclibc-300-006_better_file_error.patch b/packages/binutils/binutils-2.16.91.0.6/binutils-uclibc-300-006_better_file_error.patch
new file mode 100644
index 0000000000..f337611edf
--- /dev/null
+++ b/packages/binutils/binutils-2.16.91.0.6/binutils-uclibc-300-006_better_file_error.patch
@@ -0,0 +1,43 @@
+#!/bin/sh -e
+## 006_better_file_error.dpatch by David Kimdon <dwhedon@gordian.com>
+##
+## All lines beginning with `## DP:' are a description of the patch.
+## DP: Specify which filename is causing an error if the filename is a
+## DP: directory. (#45832)
+
+if [ $# -ne 1 ]; then
+    echo >&2 "`basename $0`: script expects -patch|-unpatch as argument"
+    exit 1
+fi
+
+[ -f debian/patches/00patch-opts ] && . debian/patches/00patch-opts
+patch_opts="${patch_opts:--f --no-backup-if-mismatch}"
+
+case "$1" in
+       -patch) patch $patch_opts -p1 < $0;;
+       -unpatch) patch $patch_opts -p1 -R < $0;;
+        *)
+                echo >&2 "`basename $0`: script expects -patch|-unpatch as argument"
+                exit 1;;
+esac
+
+exit 0
+
+@DPATCH@
+diff -urNad /home/james/debian/packages/binutils/binutils-2.14.90.0.6/bfd/opncls.c binutils-2.14.90.0.6/bfd/opncls.c
+--- /home/james/debian/packages/binutils/binutils-2.14.90.0.6/bfd/opncls.c	2003-07-23 16:08:09.000000000 +0100
++++ binutils-2.14.90.0.6/bfd/opncls.c	2003-09-10 22:35:00.000000000 +0100
+@@ -150,6 +150,13 @@
+ {
+   bfd *nbfd;
+   const bfd_target *target_vec;
++  struct stat s;
++
++  if (stat (filename, &s) == 0)
++    if (S_ISDIR(s.st_mode)) {
++      bfd_set_error (bfd_error_file_not_recognized);
++      return NULL;
++    }
+ 
+   nbfd = _bfd_new_bfd ();
+   if (nbfd == NULL)
diff --git a/packages/binutils/binutils-2.16.91.0.6/binutils-uclibc-300-012_check_ldrunpath_length.patch b/packages/binutils/binutils-2.16.91.0.6/binutils-uclibc-300-012_check_ldrunpath_length.patch
new file mode 100644
index 0000000000..498651a90c
--- /dev/null
+++ b/packages/binutils/binutils-2.16.91.0.6/binutils-uclibc-300-012_check_ldrunpath_length.patch
@@ -0,0 +1,47 @@
+#!/bin/sh -e
+## 012_check_ldrunpath_length.dpatch by Chris Chimelis <chris@debian.org>
+##
+## All lines beginning with `## DP:' are a description of the patch.
+## DP: Only generate an RPATH entry if LD_RUN_PATH is not empty, for
+## DP: cases where -rpath isn't specified. (#151024)
+
+if [ $# -ne 1 ]; then
+    echo >&2 "`basename $0`: script expects -patch|-unpatch as argument"
+    exit 1
+fi
+
+[ -f debian/patches/00patch-opts ] && . debian/patches/00patch-opts
+patch_opts="${patch_opts:--f --no-backup-if-mismatch}"
+
+case "$1" in
+       -patch) patch $patch_opts -p1 < $0;;
+       -unpatch) patch $patch_opts -p1 -R < $0;;
+        *)
+                echo >&2 "`basename $0`: script expects -patch|-unpatch as argument"
+                exit 1;;
+esac
+
+exit 0
+
+@DPATCH@
+diff -urNad /home/james/debian/packages/binutils/new/binutils-2.15/ld/emultempl/elf32.em binutils-2.15/ld/emultempl/elf32.em
+--- /home/james/debian/packages/binutils/new/binutils-2.15/ld/emultempl/elf32.em	2004-05-21 23:12:58.000000000 +0100
++++ binutils-2.15/ld/emultempl/elf32.em	2004-05-21 23:12:59.000000000 +0100
+@@ -692,6 +692,8 @@
+ 	      && command_line.rpath == NULL)
+ 	    {
+ 	      lib_path = (const char *) getenv ("LD_RUN_PATH");
++	      if ((lib_path) && (strlen (lib_path) == 0))
++		  lib_path = NULL;
+ 	      if (gld${EMULATION_NAME}_search_needed (lib_path, &n,
+ 						      force))
+ 		break;
+@@ -871,6 +873,8 @@
+   rpath = command_line.rpath;
+   if (rpath == NULL)
+     rpath = (const char *) getenv ("LD_RUN_PATH");
++  if ((rpath) && (strlen (rpath) == 0))
++      rpath = NULL;
+   if (! (bfd_elf_size_dynamic_sections
+ 	 (output_bfd, command_line.soname, rpath,
+ 	  command_line.filter_shlib,
diff --git a/packages/binutils/binutils-2.16.91.0.6/binutils-uclibc-400-mips-ELF_MAXPAGESIZE-4K.patch b/packages/binutils/binutils-2.16.91.0.6/binutils-uclibc-400-mips-ELF_MAXPAGESIZE-4K.patch
new file mode 100644
index 0000000000..5959c718d2
--- /dev/null
+++ b/packages/binutils/binutils-2.16.91.0.6/binutils-uclibc-400-mips-ELF_MAXPAGESIZE-4K.patch
@@ -0,0 +1,26 @@
+--- binutils/bfd/elf32-mips.c~
++++ binutils/bfd/elf32-mips.c
+@@ -1613,7 +1613,9 @@
+ 
+ /* The SVR4 MIPS ABI says that this should be 0x10000, and Linux uses
+    page sizes of up to that limit, so we need to respect it.  */
+-#define ELF_MAXPAGESIZE			0x10000
++/*#define ELF_MAXPAGESIZE			0x10000*/
++/* Use 4K to shrink the elf header.  NOT for general use! */
++#define ELF_MAXPAGESIZE			0x1000
+ #define elf32_bed			elf32_tradbed
+ 
+ /* Include the target file again for this target.  */
+--- binutils/bfd/elfn32-mips.c~
++++ binutils/bfd/elfn32-mips.c
+@@ -2399,7 +2399,9 @@
+ 
+ /* The SVR4 MIPS ABI says that this should be 0x10000, and Linux uses
+    page sizes of up to that limit, so we need to respect it.  */
+-#define ELF_MAXPAGESIZE			0x10000
++/*#define ELF_MAXPAGESIZE			0x10000*/
++/* Use 4K to shrink the elf header.  NOT for general use! */
++#define ELF_MAXPAGESIZE			0x1000
+ #define elf32_bed			elf32_tradbed
+ 
+ /* Include the target file again for this target.  */
diff --git a/packages/binutils/binutils-2.16.91.0.6/binutils-uclibc-702-binutils-skip-comments.patch b/packages/binutils/binutils-2.16.91.0.6/binutils-uclibc-702-binutils-skip-comments.patch
new file mode 100644
index 0000000000..9ef7a7c9ec
--- /dev/null
+++ b/packages/binutils/binutils-2.16.91.0.6/binutils-uclibc-702-binutils-skip-comments.patch
@@ -0,0 +1,93 @@
+Retrieved from http://sources.redhat.com/ml/binutils/2004-04/msg00646.html
+Fixes
+localealias.s:544: Error: junk at end of line, first unrecognized character is `,' 
+when building glibc-2.3.2 with gcc-3.4.0 and binutils-2.15.90.0.3
+
+Paths adjusted to match crosstool's patcher.
+
+Message-Id: m3n052qw2g.fsf@whitebox.m5r.de
+From: Andreas Schwab <schwab at suse dot de>
+To: Nathan Sidwell <nathan at codesourcery dot com>
+Cc: Ian Lance Taylor <ian at wasabisystems dot com>, binutils at sources dot redhat dot com
+Date: Fri, 23 Apr 2004 22:27:19 +0200
+Subject: Re: demand_empty_rest_of_line and ignore_rest_of_line
+
+Nathan Sidwell <nathan@codesourcery.com> writes:
+
+> Index: read.c
+> ===================================================================
+> RCS file: /cvs/src/src/gas/read.c,v
+> retrieving revision 1.76
+> diff -c -3 -p -r1.76 read.c
+> *** read.c	12 Mar 2004 17:48:12 -0000	1.76
+> --- read.c	18 Mar 2004 09:56:05 -0000
+> *************** read_a_source_file (char *name)
+> *** 1053,1059 ****
+>   #endif
+>   	  input_line_pointer--;
+>   	  /* Report unknown char as ignored.  */
+> ! 	  ignore_rest_of_line ();
+>   	}
+>   
+>   #ifdef md_after_pass_hook
+> --- 1053,1059 ----
+>   #endif
+>   	  input_line_pointer--;
+>   	  /* Report unknown char as ignored.  */
+> ! 	  demand_empty_rest_of_line ();
+>   	}
+>   
+>   #ifdef md_after_pass_hook
+
+This means that the unknown character is no longer ignored, despite the
+comment.  As a side effect a line starting with a line comment character
+not followed by APP in NO_APP mode now triggers an error instead of just a
+warning, breaking builds of glibc on m68k-linux.  Earlier in
+read_a_source_file where #APP is handled there is another comment that
+claims that unknown comments are ignored, when in fact they aren't (only
+the initial line comment character is skipped).
+
+Note that the presence of #APP will mess up the line counters, but
+that appears to be difficult to fix.
+
+Andreas.
+
+2004-04-23  Andreas Schwab  <schwab@suse.de>
+
+	* read.c (read_a_source_file): Ignore unknown text after line
+	comment character.  Fix misleading comment.
+
+--- binutils/gas/read.c.~1.78.~	2004-04-23 08:58:23.000000000 +0200
++++ binutils/gas/read.c	2004-04-23 21:49:01.000000000 +0200
+@@ -950,10 +950,14 @@ read_a_source_file (char *name)
+ 	      unsigned int new_length;
+ 	      char *tmp_buf = 0;
+ 
+-	      bump_line_counters ();
+ 	      s = input_line_pointer;
+ 	      if (strncmp (s, "APP\n", 4))
+-		continue;	/* We ignore it */
++		{
++		  /* We ignore it */
++		  ignore_rest_of_line ();
++		  continue;
++		}
++	      bump_line_counters ();
+ 	      s += 4;
+ 
+ 	      sb_new (&sbuf);
+@@ -1052,7 +1056,7 @@ read_a_source_file (char *name)
+ 	    continue;
+ #endif
+ 	  input_line_pointer--;
+-	  /* Report unknown char as ignored.  */
++	  /* Report unknown char as error.  */
+ 	  demand_empty_rest_of_line ();
+ 	}
+ 
+
+-- 
+Andreas Schwab, SuSE Labs, schwab@suse.de
+SuSE Linux AG, Maxfeldstra&#xC3;e 5, 90409 N&#xC3;rnberg, Germany
+Key fingerprint = 58CA 54C7 6D53 942B 1756  01D3 44D5 214B 8276 4ED5
+"And now for something completely different."
diff --git a/packages/binutils/binutils-cross-sdk_2.16.91.0.6.bb b/packages/binutils/binutils-cross-sdk_2.16.91.0.6.bb
new file mode 100644
index 0000000000..714e3ce7ef
--- /dev/null
+++ b/packages/binutils/binutils-cross-sdk_2.16.91.0.6.bb
@@ -0,0 +1,20 @@
+SECTION = "devel"
+include binutils_${PV}.bb
+inherit sdk
+DEPENDS += "flex-native bison-native"
+FILESDIR = "${@os.path.dirname(bb.data.getVar('FILE',d,1))}/binutils-${PV}"
+EXTRA_OECONF = "--with-sysroot=${CROSS_DIR}/${TARGET_SYS} \
+		--program-prefix=${TARGET_PREFIX}"
+
+do_stage() {
+	:
+}
+
+do_install () {
+        autotools_do_install
+                                                                               
+        # Install the libiberty header
+        install -d ${D}${includedir}
+        install -m 644 ${S}/include/ansidecl.h ${D}${includedir}
+        install -m 644 ${S}/include/libiberty.h ${D}${includedir}
+}
diff --git a/packages/binutils/binutils-cross_2.16.91.0.6.bb b/packages/binutils/binutils-cross_2.16.91.0.6.bb
new file mode 100644
index 0000000000..7e165271d7
--- /dev/null
+++ b/packages/binutils/binutils-cross_2.16.91.0.6.bb
@@ -0,0 +1,32 @@
+SECTION = "devel"
+include binutils_${PV}.bb
+inherit cross
+DEPENDS += "flex-native bison-native"
+PROVIDES = "virtual/${TARGET_PREFIX}binutils"
+FILESDIR = "${@os.path.dirname(bb.data.getVar('FILE',d,1))}/binutils-${PV}"
+PACKAGES = ""
+EXTRA_OECONF = "--with-sysroot=${CROSS_DIR}/${TARGET_SYS} \
+		--program-prefix=${TARGET_PREFIX}"
+
+do_stage () {
+	oe_runmake install
+
+	# We don't really need these, so we'll remove them...
+	rm -rf ${CROSS_DIR}/lib/ldscripts
+	rm -rf ${CROSS_DIR}/share/info
+	rm -rf ${CROSS_DIR}/share/locale
+	rm -rf ${CROSS_DIR}/share/man
+	rmdir ${CROSS_DIR}/share || :
+	rmdir ${CROSS_DIR}/${libdir}/gcc-lib || :
+	rmdir ${CROSS_DIR}/${libdir} || :
+	rmdir ${CROSS_DIR}/${prefix} || :
+
+	# We want to move this into the target specific location
+	mkdir -p ${CROSS_DIR}/${TARGET_SYS}/lib
+	mv -f ${CROSS_DIR}/lib/libiberty.a ${CROSS_DIR}/${TARGET_SYS}/lib
+	rmdir ${CROSS_DIR}/lib || :
+}
+
+do_install () {
+	:
+}
diff --git a/packages/binutils/binutils_2.16.91.0.6.bb b/packages/binutils/binutils_2.16.91.0.6.bb
new file mode 100644
index 0000000000..185749bd3e
--- /dev/null
+++ b/packages/binutils/binutils_2.16.91.0.6.bb
@@ -0,0 +1,123 @@
+DESCRIPTION = "A GNU collection of binary utilities"
+HOMEPAGE = "http://www.gnu.org/software/binutils/"
+SECTION = "devel"
+LICENSE = "GPL"
+MAINTAINER = "Gerald Britton <gbritton@doomcom.org>"
+
+inherit autotools gettext
+
+PACKAGES = "${PN} ${PN}-dev ${PN}-doc ${PN}-symlinks"
+
+FILES_${PN} = " \
+	${bindir}/${TARGET_PREFIX}* \
+	${libdir}/lib*-*.so \
+	${prefix}/${TARGET_SYS}/bin/*"
+
+FILES_${PN}-dev = " \
+	${includedir} \
+	${libdir}/*.a \
+	${libdir}/*.la \
+	${libdir}/libbfd.so \
+	${libdir}/libopcodes.so"
+
+FILES_${PN}-symlinks = " \
+	${bindir}/addr2line \
+	${bindir}/ar \
+	${bindir}/as \
+	${bindir}/c++filt \
+	${bindir}/gprof \
+	${bindir}/ld \
+	${bindir}/nm \
+	${bindir}/objcopy \
+	${bindir}/objdump \
+	${bindir}/ranlib \
+	${bindir}/readelf \
+	${bindir}/size \
+	${bindir}/strings \
+	${bindir}/strip"
+
+SRC_URI = \
+    "http://ftp.kernel.org/pub/linux/devel/binutils/binutils-${PV}.tar.bz2 \
+     file://binutils-2.16.91.0.6-objcopy-rename-errorcode.patch;patch=1 \
+     file://binutils-uclibc-100-uclibc-conf.patch;patch=1 \
+     file://binutils-uclibc-300-001_ld_makefile_patch.patch;patch=1 \
+     file://binutils-uclibc-300-006_better_file_error.patch;patch=1 \
+     file://binutils-uclibc-300-012_check_ldrunpath_length.patch;patch=1 \
+     file://binutils-uclibc-400-mips-ELF_MAXPAGESIZE-4K.patch;patch=1 \
+     file://binutils-uclibc-702-binutils-skip-comments.patch;patch=1"
+
+S = "${WORKDIR}/binutils-${PV}"
+B = "${S}/build.${HOST_SYS}.${TARGET_SYS}"
+
+EXTRA_OECONF = "--program-prefix=${TARGET_PREFIX} \
+		--enable-shared"
+
+# This is necessary due to a bug in the binutils Makefiles
+EXTRA_OEMAKE = "configure-build-libiberty all"
+
+export AR = "${HOST_PREFIX}ar"
+export AS = "${HOST_PREFIX}as"
+export LD = "${HOST_PREFIX}ld"
+export NM = "${HOST_PREFIX}nm"
+export RANLIB = "${HOST_PREFIX}ranlib"
+export OBJCOPY = "${HOST_PREFIX}objcopy"
+export OBJDUMP = "${HOST_PREFIX}objdump"
+
+export AR_FOR_TARGET = "${TARGET_PREFIX}ar"
+export AS_FOR_TARGET = "${TARGET_PREFIX}as"
+export LD_FOR_TARGET = "${TARGET_PREFIX}ld"
+export NM_FOR_TARGET = "${TARGET_PREFIX}nm"
+export RANLIB_FOR_TARGET = "${TARGET_PREFIX}ranlib"
+
+export CC_FOR_HOST = "${CCACHE} ${HOST_PREFIX}gcc ${HOST_CC_ARCH}"
+export CXX_FOR_HOST = "${CCACHE} ${HOST_PREFIX}gcc ${HOST_CC_ARCH}"
+
+export CC_FOR_BUILD = "${BUILD_CC}"
+export CPP_FOR_BUILD = "${BUILD_CPP}"
+export CFLAGS_FOR_BUILD = "${BUILD_CFLAGS}"
+
+export CC = "${CCACHE} ${HOST_PREFIX}gcc ${HOST_CC_ARCH}"
+
+do_configure () {
+	(cd ${S}; gnu-configize) || die "Failed to run gnu-configize"
+	oe_runconf
+}
+
+do_stage () {
+	oe_libinstall -so -a -C opcodes libopcodes ${STAGING_LIBDIR}/
+	oe_libinstall -a -C libiberty libiberty ${STAGING_LIBDIR}/
+	oe_libinstall -so -a -C bfd libbfd ${STAGING_LIBDIR}/
+	install -m 0644 ${S}/include/dis-asm.h ${STAGING_INCDIR}/
+	install -m 0644 ${S}/include/symcat.h ${STAGING_INCDIR}/
+	install -m 0644 ${S}/include/libiberty.h ${STAGING_INCDIR}/
+	install -m 0644 ${S}/include/ansidecl.h ${STAGING_INCDIR}/
+	install -m 0644 ${S}/include/bfdlink.h ${STAGING_INCDIR}/
+	install -m 0644 bfd/bfd.h ${STAGING_INCDIR}/
+}
+
+do_install () {
+	autotools_do_install
+
+	# We don't really need these, so we'll remove them...
+	rm -rf ${D}${libdir}/ldscripts
+
+	# Fix the /usr/${TARGET_SYS}/bin/* links
+	for l in ${D}${prefix}/${TARGET_SYS}/bin/*; do
+		rm -f $l
+		ln -sf `echo ${prefix}/${TARGET_SYS}/bin \
+			| tr -s / \
+			| sed -e 's,^/,,' -e 's,[^/]*,..,g'`${bindir}/${TARGET_PREFIX}`basename $l` $l
+	done
+
+	# Install the libiberty header
+	install -d ${D}${includedir}
+	install -m 644 ${S}/include/ansidecl.h ${D}${includedir}
+	install -m 644 ${S}/include/libiberty.h ${D}${includedir}
+
+	cd ${D}${bindir}
+
+	# Symlinks for ease of running these on the native target
+	for p in ${TARGET_SYS}-* ; do
+		ln -sf $p `echo $p | sed -e s,${TARGET_SYS}-,,`
+	done
+}
diff --git a/packages/wpa-supplicant/files/defaults-gnutls b/packages/wpa-supplicant/files/defaults-gnutls
new file mode 100644
index 0000000000..67c4cbddf8
--- /dev/null
+++ b/packages/wpa-supplicant/files/defaults-gnutls
@@ -0,0 +1,8 @@
+# Useful flags:
+#  -i <ifname>          Interface (required, unless specified in config)
+#  -D <driver>          Wireless Driver
+#  -d                   Debugging (-dd for more)
+#  -q                   Quiet (-qq for more)
+
+CONFIG="/etc/wpa_supplicant.conf"
+OPTIONS="-i eth1 -D wext"
diff --git a/packages/wpa-supplicant/files/wpa_supplicant.conf-gnutls b/packages/wpa-supplicant/files/wpa_supplicant.conf-gnutls
index da407b5ef3..c91ffe0c84 100644
--- a/packages/wpa-supplicant/files/wpa_supplicant.conf-gnutls
+++ b/packages/wpa-supplicant/files/wpa_supplicant.conf-gnutls
@@ -1,502 +1,7 @@
-##### Example wpa_supplicant configuration file ###############################
-# Empty lines and lines starting with # are ignored
-
-# NOTE! This file may contain password information and should probably be made
-# readable only by root user on multiuser systems.
-
-# global configuration (shared by all network blocks)
-#
-# Interface for separate control program. If this is specified, wpa_supplicant
-# will create this directory and a UNIX domain socket for listening to requests
-# from external programs (CLI/GUI, etc.) for status information and
-# configuration. The socket file will be named based on the interface name, so
-# multiple wpa_supplicant processes can be run at the same time if more than
-# one interface is used.
-# /var/run/wpa_supplicant is the recommended directory for sockets and by
-# default, wpa_cli will use it when trying to connect with wpa_supplicant.
 ctrl_interface=/var/run/wpa_supplicant
-
-# Access control for the control interface can be configured by setting the
-# directory to allow only members of a group to use sockets. This way, it is
-# possible to run wpa_supplicant as root (since it needs to change network
-# configuration and open raw sockets) and still allow GUI/CLI components to be
-# run as non-root users. However, since the control interface can be used to
-# change the network configuration, this access needs to be protected in many
-# cases. By default, wpa_supplicant is configured to use gid 0 (root). If you
-# want to allow non-root users to use the control interface, add a new group
-# and change this value to match with that group. Add users that should have
-# control interface access to this group. If this variable is commented out or
-# not included in the configuration file, group will not be changed from the
-# value it got by default when the directory or socket was created.
-#
-# This variable can be a group name or gid.
-#ctrl_interface_group=wheel
 ctrl_interface_group=0
+update_config=1
 
-# IEEE 802.1X/EAPOL version
-# wpa_supplicant was implemented based on IEEE 802-1X-REV-d8 which defines
-# EAPOL version 2. However, there are many APs that do not handle the new
-# version number correctly (they seem to drop the frames completely). In order
-# to make wpa_supplicant interoperate with these APs, the version number is set
-# to 1 by default. This configuration value can be used to set it to the new
-# version (2).
-eapol_version=1
-
-# AP scanning/selection
-# By default, wpa_supplicant requests driver to perform AP scanning and then
-# uses the scan results to select a suitable AP. Another alternative is to
-# allow the driver to take care of AP scanning and selection and use
-# wpa_supplicant just to process EAPOL frames based on IEEE 802.11 association
-# information from the driver.
-# 1: wpa_supplicant initiates scanning and AP selection
-# 0: driver takes care of scanning, AP selection, and IEEE 802.11 association
-#    parameters (e.g., WPA IE generation); this mode can also be used with
-#    non-WPA drivers when using IEEE 802.1X mode; do not try to associate with
-#    APs (i.e., external program needs to control association)
-# 2: like 0, but associate with APs using security policy and SSID (but not
-#    BSSID); this can be used, e.g., with ndiswrapper and NDIS driver to
-#    enable operation with hidden SSIDs and optimized roaming; in this mode,
-#    only the first network block in the configuration file is used and this
-#    configuration should have explicit security policy (i.e., only one option
-#    in the lists) for key_mgmt, pairwise, group, proto variables
-ap_scan=1
-
-# EAP fast re-authentication
-# By default, fast re-authentication is enabled for all EAP methods that
-# support it. This variable can be used to disable fast re-authentication.
-# Normally, there is no need to disable this.
-fast_reauth=1
-
-# network block
-#
-# Each network (usually AP's sharing the same SSID) is configured as a separate
-# block in this configuration file. The network blocks are in preference order
-# (the first match is used).
-#
-# network block fields:
-#
-# ssid: SSID (mandatory); either as an ASCII string with double quotation or
-#	as hex string; network name
-#
-# scan_ssid:
-#	0 = do not scan this SSID with specific Probe Request frames (default)
-#	1 = scan with SSID-specific Probe Request frames (this can be used to
-#	    find APs that do not accept broadcast SSID or use multiple SSIDs;
-#	    this will add latency to scanning, so enable this only when needed)
-#
-# bssid: BSSID (optional); if set, this network block is used only when
-#	associating with the AP using the configured BSSID
-#
-# priority: priority group (integer)
-# By default, all networks will get same priority group (0). If some of the
-# networks are more desirable, this field can be used to change the order in
-# which wpa_supplicant goes through the networks when selecting a BSS. The
-# priority groups will be iterated in decreasing priority (i.e., the larger the
-# priority value, the sooner the network is matched against the scan results).
-# Within each priority group, networks will be selected based on security
-# policy, signal strength, etc.
-# Please note that AP scanning with scan_ssid=1 is not using this priority to
-# select the order for scanning. Instead, it uses the order the networks are in
-# the configuration file.
-#
-# mode: IEEE 802.11 operation mode
-# 0 = infrastructure (Managed) mode, i.e., associate with an AP (default)
-# 1 = IBSS (ad-hoc, peer-to-peer)
-# Note: IBSS can only be used with key_mgmt NONE (plaintext and static WEP)
-# and key_mgmt=WPA-NONE (fixed group key TKIP/CCMP). In addition, ap_scan has
-# to be set to 2 for IBSS. WPA-None requires following network block options:
-# proto=WPA, key_mgmt=WPA-NONE, pairwise=NONE, group=TKIP (or CCMP, but not
-# both), and psk must also be set.
-#
-# proto: list of accepted protocols
-# WPA = WPA/IEEE 802.11i/D3.0
-# RSN = WPA2/IEEE 802.11i (also WPA2 can be used as an alias for RSN)
-# If not set, this defaults to: WPA RSN
-#
-# key_mgmt: list of accepted authenticated key management protocols
-# WPA-PSK = WPA pre-shared key (this requires 'psk' field)
-# WPA-EAP = WPA using EAP authentication (this can use an external
-#	program, e.g., Xsupplicant, for IEEE 802.1X EAP Authentication
-# IEEE8021X = IEEE 802.1X using EAP authentication and (optionally) dynamically
-#	generated WEP keys
-# NONE = WPA is not used; plaintext or static WEP could be used
-# If not set, this defaults to: WPA-PSK WPA-EAP
-#
-# auth_alg: list of allowed IEEE 802.11 authentication algorithms
-# OPEN = Open System authentication (required for WPA/WPA2)
-# SHARED = Shared Key authentication (requires static WEP keys)
-# LEAP = LEAP/Network EAP (only used with LEAP)
-# If not set, automatic selection is used (Open System with LEAP enabled if
-# LEAP is allowed as one of the EAP methods).
-#
-# pairwise: list of accepted pairwise (unicast) ciphers for WPA
-# CCMP = AES in Counter mode with CBC-MAC [RFC 3610, IEEE 802.11i/D7.0]
-# TKIP = Temporal Key Integrity Protocol [IEEE 802.11i/D7.0]
-# NONE = Use only Group Keys (deprecated, should not be included if APs support
-#	pairwise keys)
-# If not set, this defaults to: CCMP TKIP
-#
-# group: list of accepted group (broadcast/multicast) ciphers for WPA
-# CCMP = AES in Counter mode with CBC-MAC [RFC 3610, IEEE 802.11i/D7.0]
-# TKIP = Temporal Key Integrity Protocol [IEEE 802.11i/D7.0]
-# WEP104 = WEP (Wired Equivalent Privacy) with 104-bit key
-# WEP40 = WEP (Wired Equivalent Privacy) with 40-bit key [IEEE 802.11]
-# If not set, this defaults to: CCMP TKIP WEP104 WEP40
-#
-# psk: WPA preshared key; 256-bit pre-shared key
-# The key used in WPA-PSK mode can be entered either as 64 hex-digits, i.e.,
-# 32 bytes or as an ASCII passphrase (in which case, the real PSK will be
-# generated using the passphrase and SSID). ASCII passphrase must be between
-# 8 and 63 characters (inclusive).
-# This field is not needed, if WPA-EAP is used.
-# Note: Separate tool, wpa_passphrase, can be used to generate 256-bit keys
-# from ASCII passphrase. This process uses lot of CPU and wpa_supplicant
-# startup and reconfiguration time can be optimized by generating the PSK only
-# only when the passphrase or SSID has actually changed.
-#
-# eapol_flags: IEEE 802.1X/EAPOL options (bit field)
-# Dynamic WEP key require for non-WPA mode
-# bit0 (1): require dynamically generated unicast WEP key
-# bit1 (2): require dynamically generated broadcast WEP key
-# 	(3 = require both keys; default)
-#
-# Following fields are only used with internal EAP implementation.
-# eap: space-separated list of accepted EAP methods
-#	MD5 = EAP-MD5 (unsecure and does not generate keying material ->
-#			cannot be used with WPA; to be used as a Phase 2 method
-#			with EAP-PEAP or EAP-TTLS)
-#       MSCHAPV2 = EAP-MSCHAPv2 (cannot be used separately with WPA; to be used
-#		as a Phase 2 method with EAP-PEAP or EAP-TTLS)
-#       OTP = EAP-OTP (cannot be used separately with WPA; to be used
-#		as a Phase 2 method with EAP-PEAP or EAP-TTLS)
-#       GTC = EAP-GTC (cannot be used separately with WPA; to be used
-#		as a Phase 2 method with EAP-PEAP or EAP-TTLS)
-#	TLS = EAP-TLS (client and server certificate)
-#	PEAP = EAP-PEAP (with tunnelled EAP authentication)
-#	TTLS = EAP-TTLS (with tunnelled EAP or PAP/CHAP/MSCHAP/MSCHAPV2
-#			 authentication)
-#	If not set, all compiled in methods are allowed.
-#
-# identity: Identity string for EAP
-# anonymous_identity: Anonymous identity string for EAP (to be used as the
-#	unencrypted identity with EAP types that support different tunnelled
-#	identity, e.g., EAP-TTLS)
-# password: Password string for EAP
-# ca_cert: File path to CA certificate file. This file can have one or more
-#	trusted CA certificates. If ca_cert is not included, server certificate
-#	will not be verified. This is insecure and the CA file should always be
-#	configured.
-# client_cert: File path to client certificate file (PEM/DER)
-# private_key: File path to client private key file (PEM/DER/PFX)
-#	When PKCS#12/PFX file (.p12/.pfx) is used, client_cert should be
-#	commented out. Both the private key and certificate will be read from
-#	the PKCS#12 file in this case.
-# private_key_passwd: Password for private key file
-# dh_file: File path to DH/DSA parameters file (in PEM format)
-#	This is an optional configuration file for setting parameters for an
-#	ephemeral DH key exchange. In most cases, the default RSA
-#	authentication does not use this configuration. However, it is possible
-#	setup RSA to use ephemeral DH key exchange. In addition, ciphers with
-#	DSA keys always use ephemeral DH keys. This can be used to achieve
-#	forward secrecy. If the file is in DSA parameters format, it will be
-#	automatically converted into DH params.
-# subject_match: Substring to be matched against the subject of the
-#	authentication server certificate. If this string is set, the server
-#	sertificate is only accepted if it contains this string in the subject.
-#	The subject string is in following format:
-#	/C=US/ST=CA/L=San Francisco/CN=Test AS/emailAddress=as@example.com
-# phase1: Phase1 (outer authentication, i.e., TLS tunnel) parameters
-#	(string with field-value pairs, e.g., "peapver=0" or
-#	"peapver=1 peaplabel=1")
-#	'peapver' can be used to force which PEAP version (0 or 1) is used.
-#	'peaplabel=1' can be used to force new label, "client PEAP encryption",
-#	to be used during key derivation when PEAPv1 or newer. Most existing
-#	PEAPv1 implementation seem to be using the old label, "client EAP
-#	encryption", and wpa_supplicant is now using that as the default value.
-#	Some servers, e.g., Radiator, may require peaplabel=1 configuration to
-#	interoperate with PEAPv1; see eap_testing.txt for more details.
-#	'peap_outer_success=0' can be used to terminate PEAP authentication on
-#	tunneled EAP-Success. This is required with some RADIUS servers that
-#	implement draft-josefsson-pppext-eap-tls-eap-05.txt (e.g.,
-#	Lucent NavisRadius v4.4.0 with PEAP in "IETF Draft 5" mode)
-#	sim_min_num_chal=3 can be used to configure EAP-SIM to require three
-#	challenges (by default, it accepts 2 or 3)
-# phase2: Phase2 (inner authentication with TLS tunnel) parameters
-#	(string with field-value pairs, e.g., "auth=MSCHAPV2" for EAP-PEAP or
-#	"autheap=MSCHAPV2 autheap=MD5" for EAP-TTLS)
-# Following certificate/private key fields are used in inner Phase2
-# authentication when using EAP-TTLS or EAP-PEAP.
-# ca_cert2: File path to CA certificate file. This file can have one or more
-#	trusted CA certificates. If ca_cert2 is not included, server
-#	certificate will not be verified. This is insecure and the CA file
-#	should always be configured.
-# client_cert2: File path to client certificate file
-# private_key2: File path to client private key file
-# private_key2_passwd: Password for private key file
-# dh_file2: File path to DH/DSA parameters file (in PEM format)
-# subject_match2: Substring to be matched against the subject of the
-#	authentication server certificate.
-#
-# EAP-PSK variables:
-# eappsk: 16-byte (128-bit, 32 hex digits) pre-shared key in hex format
-# nai: user NAI
-# server_nai: authentication server NAI
-#
-# EAP-FAST variables:
-# pac_file: File path for the PAC entries. wpa_supplicant will need to be able
-#	to create this file and write updates to it when PAC is being
-#	provisioned or refreshed.
-# phase1: fast_provisioning=1 option enables in-line provisioning of EAP-FAST
-#	credentials (PAC)
-#
-# wpa_supplicant supports number of "EAP workarounds" to work around
-# interoperability issues with incorrectly behaving authentication servers.
-# These are enabled by default because some of the issues are present in large
-# number of authentication servers. Strict EAP conformance mode can be
-# configured by disabling workarounds with eap_workaround=0.
-
-# Example blocks:
-
-# Simple case: WPA-PSK, PSK as an ASCII passphrase, allow all valid ciphers
-network={
-	ssid="simple"
-	psk="very secret passphrase"
-	priority=5
-}
-
-# Same as previous, but request SSID-specific scanning (for APs that reject
-# broadcast SSID)
-network={
-	ssid="second ssid"
-	scan_ssid=1
-	psk="very secret passphrase"
-	priority=2
-}
-
-# Only WPA-PSK is used. Any valid cipher combination is accepted.
-network={
-	ssid="example"
-	proto=WPA
-	key_mgmt=WPA-PSK
-	pairwise=CCMP TKIP
-	group=CCMP TKIP WEP104 WEP40
-	psk=06b4be19da289f475aa46a33cb793029d4ab3db7a23ee92382eb0106c72ac7bb
-	priority=2
-}
-
-# Only WPA-EAP is used. Both CCMP and TKIP is accepted. An AP that used WEP104
-# or WEP40 as the group cipher will not be accepted.
-network={
-	ssid="example"
-	proto=RSN
-	key_mgmt=WPA-EAP
-	pairwise=CCMP TKIP
-	group=CCMP TKIP
-	eap=TLS
-	identity="user@example.com"
-	ca_cert="/etc/cert/ca.pem"
-	client_cert="/etc/cert/user.pem"
-	private_key="/etc/cert/user.prv"
-	private_key_passwd="password"
-	priority=1
-}
-
-# EAP-PEAP/MSCHAPv2 configuration for RADIUS servers that use the new peaplabel
-# (e.g., Radiator)
-network={
-	ssid="example"
-	key_mgmt=WPA-EAP
-	eap=PEAP
-	identity="user@example.com"
-	password="foobar"
-	ca_cert="/etc/cert/ca.pem"
-	phase1="peaplabel=1"
-	phase2="auth=MSCHAPV2"
-	priority=10
-}
-
-# EAP-TTLS/EAP-MD5-Challenge configuration with anonymous identity for the
-# unencrypted use. Real identity is sent only within an encrypted TLS tunnel.
-network={
-	ssid="example"
-	key_mgmt=WPA-EAP
-	eap=TTLS
-	identity="user@example.com"
-	anonymous_identity="anonymous@example.com"
-	password="foobar"
-	ca_cert="/etc/cert/ca.pem"
-	priority=2
-}
-
-# EAP-TTLS/MSCHAPv2 configuration with anonymous identity for the unencrypted
-# use. Real identity is sent only within an encrypted TLS tunnel.
-network={
-	ssid="example"
-	key_mgmt=WPA-EAP
-	eap=TTLS
-	identity="user@example.com"
-	anonymous_identity="anonymous@example.com"
-	password="foobar"
-	ca_cert="/etc/cert/ca.pem"
-	phase2="auth=MSCHAPV2"
-}
-
-# WPA-EAP, EAP-TTLS with different CA certificate used for outer and inner
-# authentication.
-network={
-	ssid="example"
-	key_mgmt=WPA-EAP
-	eap=TTLS
-	# Phase1 / outer authentication
-	anonymous_identity="anonymous@example.com"
-	ca_cert="/etc/cert/ca.pem"
-	# Phase 2 / inner authentication
-	phase2="autheap=TLS"
-	ca_cert2="/etc/cert/ca2.pem"
-	client_cert2="/etc/cer/user.pem"
-	private_key2="/etc/cer/user.prv"
-	private_key2_passwd="password"
-	priority=2
-}
-
-# Both WPA-PSK and WPA-EAP is accepted. Only CCMP is accepted as pairwise and
-# group cipher.
-network={
-	ssid="example"
-	bssid=00:11:22:33:44:55
-	proto=WPA RSN
-	key_mgmt=WPA-PSK WPA-EAP
-	pairwise=CCMP
-	group=CCMP
-	psk=06b4be19da289f475aa46a33cb793029d4ab3db7a23ee92382eb0106c72ac7bb
-}
-
-# Special characters in SSID, so use hex string. Default to WPA-PSK, WPA-EAP
-# and all valid ciphers.
-network={
-	ssid=00010203
-	psk=000102030405060708090a0b0c0d0e0f101112131415161718191a1b1c1d1e1f
-}
-
-
-# EAP-SIM with a GSM SIM or USIM
-network={
-	ssid="eap-sim-test"
-	key_mgmt=WPA-EAP
-	eap=SIM
-	pin="1234"
-	pcsc=""
-}
-
-
-# EAP-PSK
-network={
-	ssid="eap-psk-test"
-	key_mgmt=WPA-EAP
-	eap=PSK
-	identity="eap_psk_user"
-	eappsk=06b4be19da289f475aa46a33cb793029
-	nai="eap_psk_user@example.com"
-	server_nai="as@example.com"
-}
-
-
-# IEEE 802.1X/EAPOL with dynamically generated WEP keys (i.e., no WPA) using
-# EAP-TLS for authentication and key generation; require both unicast and
-# broadcast WEP keys.
-network={
-	ssid="1x-test"
-	key_mgmt=IEEE8021X
-	eap=TLS
-	identity="user@example.com"
-	ca_cert="/etc/cert/ca.pem"
-	client_cert="/etc/cert/user.pem"
-	private_key="/etc/cert/user.prv"
-	private_key_passwd="password"
-	eapol_flags=3
-}
-
-
-# LEAP with dynamic WEP keys
-network={
-	ssid="leap-example"
-	key_mgmt=IEEE8021X
-	eap=LEAP
-	identity="user"
-	password="foobar"
-}
-
-# EAP-FAST with WPA (WPA or WPA2)
-network={
-	ssid="eap-fast-test"
-	key_mgmt=WPA-EAP
-	eap=FAST
-	anonymous_identity="FAST-000102030405"
-	identity="username"
-	password="password"
-	phase1="fast_provisioning=1"
-	pac_file="/etc/wpa_supplicant.eap-fast-pac"
-}
-
-# Plaintext connection (no WPA, no IEEE 802.1X)
-network={
-	ssid="plaintext-test"
-	key_mgmt=NONE
-}
-
-
-# Shared WEP key connection (no WPA, no IEEE 802.1X)
-network={
-	ssid="static-wep-test"
-	key_mgmt=NONE
-	wep_key0="abcde"
-	wep_key1=0102030405
-	wep_key2="1234567890123"
-	wep_tx_keyidx=0
-	priority=5
-}
-
-
-# Shared WEP key connection (no WPA, no IEEE 802.1X) using Shared Key
-# IEEE 802.11 authentication
-network={
-	ssid="static-wep-test2"
-	key_mgmt=NONE
-	wep_key0="abcde"
-	wep_key1=0102030405
-	wep_key2="1234567890123"
-	wep_tx_keyidx=0
-	priority=5
-	auth_alg=SHARED
-}
-
-
-# IBSS/ad-hoc network with WPA-None/TKIP.
-network={
-	ssid="test adhoc"
-	mode=1
-	proto=WPA
-	key_mgmt=WPA-NONE
-	pairwise=NONE
-	group=TKIP
-	psk="secret passphrase"
-}
-
-
-# Catch all example that allows more or less all configuration modes
 network={
-	ssid="example"
-	scan_ssid=1
-	key_mgmt=WPA-EAP WPA-PSK IEEE8021X NONE
-	pairwise=CCMP TKIP
-	group=CCMP TKIP WEP104 WEP40
-	psk="very secret passphrase"
-	eap=TTLS PEAP TLS
-	identity="user@example.com"
-	password="foobar"
-	ca_cert="/etc/cert/ca.pem"
-	client_cert="/etc/cert/user.pem"
-	private_key="/etc/cert/user.prv"
-	private_key_passwd="password"
-	phase1="peaplabel=0"
+        key_mgmt=NONE
 }
diff --git a/packages/wpa-supplicant/wpa-supplicant_0.5.1.bb b/packages/wpa-supplicant/wpa-supplicant_0.5.1.bb
index 05d82cd892..67e5c421ca 100644
--- a/packages/wpa-supplicant/wpa-supplicant_0.5.1.bb
+++ b/packages/wpa-supplicant/wpa-supplicant_0.5.1.bb
@@ -4,13 +4,26 @@ LICENSE = "GPL"
 MAINTAINER = "Holger Schurig"
 HOMEPAGE = "http://hostap.epitest.fi/wpa_supplicant/"
 DEPENDS = "gnutls"
+PR = "r1"
 
 SRC_URI = "http://hostap.epitest.fi/releases/wpa_supplicant-${PV}.tar.gz \
 	file://defconfig-gnutls \
+	file://init.sh \
+	file://defaults-gnutls \
 	file://wpa_supplicant.conf-gnutls"
 
 S = "${WORKDIR}/wpa_supplicant-${PV}"
 
+PACKAGES_prepend = "wpa-supplicant-passphrase wpa-supplicant-cli"
+FILES_wpa-supplicant-passphrase = "/usr/sbin/wpa_passphrase"
+FILES_wpa-supplicant-cli = "/usr/sbin/wpa_cli"
+
+RRECOMMENDS_${PN} = "wpa-supplicant-passphrase wpa-supplicant-cli"
+
+INITSCRIPT_NAME = "wpa"
+INITSCRIPT_PARAMS = "defaults 10"
+inherit update-rc.d
+
 do_configure () {
 	install -m 0755 ${WORKDIR}/defconfig-gnutls  .config
 }
@@ -25,9 +38,15 @@ do_install () {
 	install -m755 wpa_passphrase ${D}${sbindir}
 	install -m755 wpa_cli        ${D}${sbindir}
 
-	install -d ${D}${sysconfdir}
-	install -m644 ${WORKDIR}/wpa_supplicant.conf-gnutls ${D}${sysconfdir}/wpa_supplicant.conf
+	install -d ${D}${localstatedir}/run/wpa_supplicant
 
 	install -d ${D}${docdir}/wpa_supplicant
-	install -m644 README ${D}${docdir}/wpa_supplicant
+	install -m644 README ${WORKDIR}/wpa_supplicant.conf ${D}${docdir}/wpa_supplicant
+
+	install -d ${D}${sysconfdir}/init.d
+	install -m700 ${WORKDIR}/init.sh ${D}${sysconfdir}/init.d/wpa
+
+	install -d ${D}${sysconfdir}/default
+	install -m600 ${WORKDIR}/defaults-gnutls ${D}${sysconfdir}/default/wpa
+	install -m600 ${WORKDIR}/wpa_supplicant.conf-gnutls ${D}${sysconfdir}/wpa_supplicant.conf
 }