summaryrefslogtreecommitdiff
path: root/packages/wpa-supplicant/files
diff options
context:
space:
mode:
authorJoseph Cole <jnc@unknown.openembedded.org>2006-03-15 16:33:39 +0000
committerOpenEmbedded Project <openembedded-devel@lists.openembedded.org>2006-03-15 16:33:39 +0000
commiteec3a2fdeff17dd79e5df962f7ca0d9d009802a9 (patch)
tree469faf6fcedc92ec15316c4a4b4029683ac41aff /packages/wpa-supplicant/files
parentfa635c71064da16047dac9b5faac2c7d1f92764e (diff)
change defconfig of 0.5.1 to build against gnutls instead of openssl.
Diffstat (limited to 'packages/wpa-supplicant/files')
-rw-r--r--packages/wpa-supplicant/files/defconfig-gnutls121
1 files changed, 70 insertions, 51 deletions
diff --git a/packages/wpa-supplicant/files/defconfig-gnutls b/packages/wpa-supplicant/files/defconfig-gnutls
index c165343399..2df5e51df8 100644
--- a/packages/wpa-supplicant/files/defconfig-gnutls
+++ b/packages/wpa-supplicant/files/defconfig-gnutls
@@ -8,49 +8,16 @@
# to override previous values of the variables.
CFLAGS = $(TARGET_CFLAGS) -I../hostapd -I../utils -I../driver/modules -Wall -MMD
-
-# for wpa_supplicant, wpa_cli
LIBS = $(TARGET_LDFLAGS)
-# for wpa_passphrase:
-LIBS_p = $(TARGET_LDFLAGS)
-
-
-# Uncomment following two lines and fix the paths if you have installed openssl
-# in non-default location
-#CFLAGS += -I/usr/local/openssl/include
-#LIBS += -L/usr/local/openssl/lib
-
-# Example configuration for various cross-compilation platforms
-
-#### sveasoft (e.g., for Linksys WRT54G) ######################################
-#CC=mipsel-uclibc-gcc
-#CC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc
-#CFLAGS += -Os
-#CPPFLAGS += -I../src/include -I../../src/router/openssl/include
-#LIBS += -L/opt/brcm/hndtools-mipsel-uclibc-0.9.19/lib -lssl
-###############################################################################
-
-#### openwrt (e.g., for Linksys WRT54G) #######################################
-#CC=mipsel-uclibc-gcc
-#CC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc
-#CFLAGS += -Os
-#CPPFLAGS=-I../src/include -I../openssl-0.9.7d/include \
-# -I../WRT54GS/release/src/include
-#LIBS = -lssl
-###############################################################################
-
-
# Driver interface for Host AP driver
CONFIG_DRIVER_HOSTAP=y
# Driver interface for Agere driver
-CONFIG_DRIVER_HERMES=y
+#CONFIG_DRIVER_HERMES=n
# Driver interface for madwifi driver
#CONFIG_DRIVER_MADWIFI=y
-# Change include directories to match with the local setup
-#CFLAGS += -I../madwifi/wpa
# Driver interface for Prism54 driver
#CONFIG_DRIVER_PRISM54=y
@@ -63,8 +30,6 @@ CONFIG_DRIVER_HERMES=y
# Driver interface for Broadcom driver
#CONFIG_DRIVER_BROADCOM=y
-# Example path for wlioctl.h; change to match your configuration
-#CFLAGS += -I/opt/WRT54GS/release/src/include
# Driver interface for Intel ipw2100 driver
#CONFIG_DRIVER_IPW2100=y
@@ -77,20 +42,12 @@ CONFIG_DRIVER_WEXT=y
#CFLAGS += -I/usr/local/include
#LIBS += -L/usr/local/lib
-# Driver interface for Windows NDIS
-#CONFIG_DRIVER_NDIS=y
-#CFLAGS += -I/usr/include/w32api/ddk
-#LIBS += -L/usr/local/lib
-# For native build using mingw
-#CONFIG_NATIVE_WINDOWS=y
-# Additional directories for cross-compilation on Linux host for mingw target
-#CFLAGS += -I/opt/mingw/mingw32/include/ddk
-#LIBS += -L/opt/mingw/mingw32/lib
-#CC=mingw32-gcc
-
# Driver interface for development testing
#CONFIG_DRIVER_TEST=y
+# Driver interface for wired Ethernet drivers
+CONFIG_DRIVER_WIRED=y
+
# Enable IEEE 802.1X Supplicant (automatically included if any EAP method is
# included)
CONFIG_IEEE8021X_EAPOL=y
@@ -122,6 +79,9 @@ CONFIG_EAP_OTP=y
# EAP-PSK (experimental; this is _not_ needed for WPA-PSK)
#CONFIG_EAP_PSK=y
+# EAP-PAX
+#CONFIG_EAP_PAX=y
+
# LEAP
CONFIG_EAP_LEAP=y
@@ -132,6 +92,10 @@ CONFIG_EAP_LEAP=y
# a file that usually has extension .p12 or .pfx)
CONFIG_PKCS12=y
+# Smartcard support (i.e., private key on a smartcard), e.g., with openssl
+# engine.
+CONFIG_SMARTCARD=y
+
# PC/SC interface for smartcards (USIM, GSM SIM)
# Enable this if EAP-SIM or EAP-AKA is included
#CONFIG_PCSC=y
@@ -146,12 +110,67 @@ CONFIG_PKCS12=y
# Include control interface for external programs, e.g, wpa_cli
CONFIG_CTRL_IFACE=y
-# Include interface for using external supplicant (Xsupplicant) for EAP
-# authentication
-#CONFIG_XSUPPLICANT_IFACE=y
-
# Include support for GNU Readline and History Libraries in wpa_cli.
# When building a wpa_cli binary for distribution, please note that these
# libraries are licensed under GPL and as such, BSD license may not apply for
# the resulting binary.
#CONFIG_READLINE=y
+
+# Remove debugging code that is printing out debug message to stdout.
+# This can be used to reduce the size of the wpa_supplicant considerably
+# if debugging code is not needed. The size reduction can be around 35%
+# (e.g., 90 kB).
+#CONFIG_NO_STDOUT_DEBUG=y
+
+# Remove WPA support, e.g., for wired-only IEEE 802.1X supplicant, to save
+# 35-50 kB in code size.
+#CONFIG_NO_WPA=y
+
+# Select configuration backend:
+# file = text file (e.g., wpa_supplicant.conf)
+# winreg = Windows registry (see win_example.reg for an example)
+CONFIG_BACKEND=file
+
+# Select program entry point implementation:
+# main = UNIX/POSIX like main() function (default)
+# main_winsvc = Windows service (read parameters from registry)
+# main_none = Very basic example (development use only)
+#CONFIG_MAIN=main
+
+# Select wrapper for operatins system and C library specific functions
+# unix = UNIX/POSIX like systems (default)
+# win32 = Windows systems
+# none = Empty template
+#CONFIG_OS=unix
+
+# Select event loop implementation
+# eloop = select() loop (default)
+# eloop_win = Windows events and WaitForMultipleObject() loop
+# eloop_none = Empty template
+#CONFIG_ELOOP=eloop
+
+# Select layer 2 packet implementation
+# linux = Linux packet socket (default)
+# pcap = libpcap/libdnet/WinPcap
+# freebsd = FreeBSD libpcap
+# winpcap = WinPcap with receive thread
+# none = Empty template
+#CONFIG_L2_PACKET=linux
+
+# IEEE 802.11i/IEEE 802.11e STAKey negotiation for direct link connection
+#CONFIG_STAKEY=y
+
+# Select TLS implementation
+# openssl = OpenSSL (default)
+# gnutls = GnuTLS (needed for TLS/IA, see also CONFIG_GNUTLS_EXTRA)
+# none = Empty template
+CONFIG_TLS=gnutls
+
+# Whether to enable TLS/IA support, which is required for EAP-TTLSv1.
+# You need CONFIG_TLS=gnutls for this to have any effect. Please note that
+# even though the core GnuTLS library is released under LGPL, this extra
+# library uses GPL and as such, the terms of GPL apply to the combination
+# of wpa_supplicant and GnuTLS if this option is enabled. BSD license may not
+# apply for distribution of the resulting binary.
+CONFIG_GNUTLS_EXTRA=y
+