rename packages/ to recipes/ per earlier agreement

See links below for more details:
http://thread.gmane.org/gmane.comp.handhelds.openembedded/21326
http://thread.gmane.org/gmane.comp.handhelds.openembedded/21816

Signed-off-by: Denys Dmytriyenko <denis@denix.org>
Acked-by: Mike Westerhof <mwester@dls.net>
Acked-by: Philip Balister <philip@balister.org>
Acked-by: Khem Raj <raj.khem@gmail.com>
Acked-by: Marcin Juszkiewicz <hrw@openembedded.org>
Acked-by: Koen Kooi <koen@openembedded.org>
Acked-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com>

1 files changed, 0 insertions, 546 deletions

diff --git a/packages/u-boot/u-boot-1.3.2/boc01/007-090217-CAPSENSE.patch b/packages/u-boot/u-boot-1.3.2/boc01/007-090217-CAPSENSE.patch
deleted file mode 100644
index 1b7630536f..0000000000
--- a/packages/u-boot/u-boot-1.3.2/boc01/007-090217-CAPSENSE.patch
+++ /dev/null
@@ -1,546 +0,0 @@
-Index: u-boot-1.3.2/common/cmd_capsense.c
-===================================================================
---- /dev/null
-+++ u-boot-1.3.2/common/cmd_capsense.c
-@@ -0,0 +1,105 @@
-+/*
-+ * (C) Copyright 2008
-+ * Alexandre Coffignal, CénoSYS, alexandre.coffignal@cenosys.com
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ *
-+ * CapSense Express touch-sensing buttons
-+ */
-+
-+#include <common.h>
-+#include <config.h>
-+#include <command.h>
-+
-+#include <capsense.h>
-+#include <i2c.h>
-+
-+#define ARG_SENSOR_NUMBER	1
-+
-+#define ARG_CMD		1
-+#define ARG_OLD_ADDRESS	2
-+
-+
-+int do_capsense (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
-+{
-+	int i;
-+	unsigned char sensors[] = CONFIG_CAPSENSE_SENSORS;
-+	int old_bus, old_address;
-+	char port[2];
-+	/* switch to correct I2C bus */
-+	old_bus = I2C_GET_BUS();
-+	I2C_SET_BUS(CFG_CAPSENSE_BUS_NUM);
-+
-+	/*
-+	 * Loop through sensors, read
-+	 * state, and output it.
-+	 */
-+	if(argc==1)
-+	{
-+		port[0]=capsense_get_state(CONFIG_CAPSENSE_I2C_ADDRESS,0);
-+		port[1]=capsense_get_state(CONFIG_CAPSENSE_I2C_ADDRESS,1);
-+		capsense_get_state(CONFIG_CAPSENSE_I2C_ADDRESS,1);
-+		printf ("P0 0x%02x 0x%02x\n",port[0],port[1]);
-+		for (i = 0; i < 8; i++)
-+		{
-+			if(sensors[0]&(1<<i))
-+			{
-+				printf ("GP0[%d]: %i\n",i,port[0]&(1<<i)?1:0);
-+			}
-+			if(sensors[1]&(1<<i))
-+			{
-+				printf ("GP1[%d]: %i\n",i,port[1]&(1<<i)?1:0);
-+			}
-+
-+		}
-+	}
-+	else
-+	{
-+		if ( strncmp(argv[ARG_CMD], "config", 3) == 0 ) {
-+			if ( argc == 3 ) {
-+				old_address=simple_strtoul (argv[ARG_OLD_ADDRESS], NULL, 10);
-+				if ( capsense_change_i2c_address(old_address, CONFIG_CAPSENSE_I2C_ADDRESS) != 0 )
-+					printf("failed to change i2c address\n");
-+				else
-+					printf("i2c address changed to 0x%02X\n", CONFIG_CAPSENSE_I2C_ADDRESS);
-+			}
-+
-+			capsense_config(CONFIG_CAPSENSE_I2C_ADDRESS);
-+			capsense_store_nvm(CONFIG_CAPSENSE_I2C_ADDRESS);
-+		}
-+		else {
-+			printf ("Usage:\n%s\n", cmdtp->help);
-+		}
-+	}
-+
-+	/* switch back to original I2C bus */
-+	I2C_SET_BUS(old_bus);
-+
-+	return 0;
-+}	/* do_capsense() */
-+
-+
-+/***************************************************/
-+
-+U_BOOT_CMD(
-+	  capsense,	4,	1,	do_capsense,
-+	  "capsense - CapSense Express touch-sensing buttons\n",
-+	  "capsense\n  Read state of the CapSense Express touch-sensing buttons.\n"
-+	  "capsense config [<old i2c address>]\n  Setup default capsense configuration.\n"
-+	  );
-Index: u-boot-1.3.2/common/Makefile
-===================================================================
---- u-boot-1.3.2.orig/common/Makefile
-+++ u-boot-1.3.2/common/Makefile
-@@ -50,6 +50,7 @@ endif
- COBJS-$(CONFIG_CMD_DISPLAY) += cmd_display.o
- COBJS-$(CONFIG_CMD_DOC) += cmd_doc.o
- COBJS-$(CONFIG_CMD_DTT) += cmd_dtt.o
-+COBJS-$(CONFIG_CMD_CAPSENSE) += cmd_capsense.o
- COBJS-$(CONFIG_CMD_GPIO) += cmd_gpio.o
- COBJS-y += cmd_eeprom.o
- COBJS-$(CONFIG_CMD_ELF) += cmd_elf.o
-Index: u-boot-1.3.2/drivers/i2c/CY8C201xx.c
-===================================================================
---- /dev/null
-+++ u-boot-1.3.2/drivers/i2c/CY8C201xx.c
-@@ -0,0 +1,289 @@
-+/*
-+ * (C) Copyright 2008
-+ * Alexandre Coffignal, CénoSYS, alexandre.coffignal@cenosys.com
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+/*
-+ * CapSense Express touch-sensing buttons
-+ */
-+
-+#include <common.h>
-+
-+#ifdef CONFIG_CAPSENSE_CY8C201XX
-+
-+#include <i2c.h>
-+#include <capsense.h>
-+
-+int capsense_read(int address, int reg)
-+{
-+	int dlen;
-+	uchar data[2];
-+
-+	/*
-+	 * Validate 'reg' param
-+	 */
-+	if ( (reg < 0) || (reg > 0xA1) )
-+		return -1;
-+
-+	/*
-+	 * Prepare to handle 1 byte result.
-+	 */
-+	dlen = 1;
-+
-+	/*
-+	 * Now try to read the register.
-+	 */
-+	if (i2c_read(address, reg, 1, data, dlen) != 0)
-+		return -1;
-+
-+	return (int)data[0];
-+}
-+
-+
-+int capsense_write(int address, int reg, int val)
-+{
-+	int dlen;
-+	uchar data[2];
-+
-+	/*
-+	 * Validate 'reg' param
-+	 */
-+	if((reg < 0) || (reg > 0xA1))
-+		return -1;
-+
-+	/*
-+	 * Handle 1 byte values.
-+	 */
-+ 	dlen = 1;
-+	data[0] = (char)(val & 0xff);
-+
-+	/*
-+	 * Write value to register.
-+	 */
-+	if (i2c_write(address, reg, 1, data, dlen) != 0)
-+		return 1;
-+
-+	return 0;
-+}
-+
-+
-+int capsense_write_N(int address, int reg,  char *data, int dlen)
-+{
-+	/*
-+	 * Validate 'reg' param
-+	 */
-+	if ( (reg < 0) || (reg > 0xA1) )
-+		return -1;
-+
-+	/*
-+	 * Write value to register.
-+	 */
-+	if ( i2c_write(address, reg, 1, data, dlen) != 0 )
-+		return 1;
-+
-+	return 0;
-+}
-+
-+
-+int capsense_get_state(int address,char port)
-+{
-+	return capsense_read(address,CAPSENSE_REG_READ_STATUS+port);
-+}
-+
-+
-+int capsense_change_i2c_address(char old_address,char new_address)
-+{
-+	unsigned char data[4];
-+	int read_address;
-+	printf("capsense change i2c address\n");
-+	//checking if the I2C address is in the limits ( I2C address can have a value from 0 to 127 )
-+	if((old_address>0x7F)||(new_address>0x7F))
-+	{
-+		printf("I2C address is not in the limits\n");
-+		return 1;
-+	}
-+
-+	//reading old capsence address
-+	read_address=capsense_read(old_address, CAPSENSE_REG_I2C_ADDR_DM);
-+	if(read_address==0xFFFFFFFF)
-+	{
-+		printf("error reading old capsence address\n");
-+		return 1;	//capsense do not respond at new address
-+	}
-+
-+	if((read_address&0x7F)!=old_address)
-+	{
-+		printf("reading old capsence address failed\n");
-+		return 1;	//Capsense not respond correctly
-+	}
-+
-+	//writing command for unlocking the I2C device address lock
-+	data[0]=0x3C;
-+	data[1]=0xA5;
-+	data[2]=0x69;
-+	if(capsense_write_N(old_address, CAPSENSE_REG_I2C_DEV_LOCK, data , 3)!=0)
-+	{
-+		printf("writing command for unlocking the I2C device address lock failed\n");
-+		return 1;
-+	}
-+
-+	//writing the new I2C address to the device I2C address register
-+	if(capsense_write(old_address, CAPSENSE_REG_I2C_ADDR_DM,new_address|0x80)!=0)
-+	{
-+		printf("writing the new I2C address to the device I2C address register failed\n");
-+		return 1;
-+	}
-+
-+	//writing command for locking the I2C device address lock
-+	data[0]=0x96;
-+	data[1]=0x5A;
-+	data[2]=0xC3;
-+	if(capsense_write_N(old_address, CAPSENSE_REG_I2C_DEV_LOCK, data , 3)!=0)
-+	{
-+		printf("writing command for locking the I2C device failed\n");
-+		return 1;
-+	}
-+
-+	//reading new capsence address
-+	read_address=capsense_read(new_address, CAPSENSE_REG_I2C_ADDR_DM);
-+	if(read_address==0xFFFFFFFF)
-+	{
-+		printf("capsense do not respond at new address\n");
-+		return 1;	//capsense do not respond at new address
-+	}
-+
-+	return 0;
-+}
-+
-+
-+static char data_GPIO_ENABLE[] = {
-+	0x00, 0x00   // GPIO_ENABLE
-+};
-+
-+static char data_CS_ENABLE[] = {
-+	0x1D, 0x10,  // CS_ENABLE
-+	0x02, 0x0F,  // GPIO_ENABLE
-+	0x00, 0x00,  // INVERSION_MASK
-+	0x00, 0x00,  // INT_MASK
-+	0x1F, 0x1F,  // STATUS_HOLD_MSK
-+	0x00, 0x02, 0x00, 0x00,  // DM_PULL_UP0, DM_STRONG0, DM_HIGHZ0, DM_OD_LOW0
-+	0x00, 0x0F, 0x00, 0x00,  // DM_PULL_UP1, DM_STRONG1, DM_HIGHZ1, DM_OD_LOW1
-+};
-+
-+static char data_OUTPUT_PORT[] = {
-+	0x00, 0x00   // OUTPUT_PORT
-+};
-+
-+static char data_OP_SEL[] = {
-+	0x00, 0x00, 0x00, 0x00, 0x00,   // OP_SEL_00
-+	0x80, 0x01, 0x00, 0x00, 0x00,   // OP_SEL_01
-+	0x00, 0x00, 0x00, 0x00, 0x00,   // OP_SEL_02
-+	0x00, 0x00, 0x00, 0x00, 0x00,   // OP_SEL_03
-+	0x00, 0x00, 0x00, 0x00, 0x00,   // OP_SEL_04
-+	0x80, 0x10, 0x00, 0x00, 0x00,   // OP_SEL_10
-+	0x80, 0x08, 0x00, 0x00, 0x00,   // OP_SEL_11
-+	0x80, 0x04, 0x00, 0x00, 0x00,   // OP_SEL_12
-+	0x80, 0x00, 0x10, 0x00, 0x00,   // OP_SEL_13
-+	0x00, 0x00, 0x00, 0x00, 0x00,   // OP_SEL_14
-+};
-+
-+static char data_CS_NOISE_TH[] = {
-+	0x28,   // CS_NOISE_TH
-+	0x64,   // CS_BL_UPD_TH
-+	0xA0,   // CS_SETL_TIME
-+	0x22,   // CS_OTH_SET
-+	0x0A,   // CS_HYSTERESIS
-+	0x03,   // CS_DEBOUNCE
-+	0x14,   // CS_NEG_NOISE_TH
-+	0x14,   // CS_LOW_BL_RST
-+	0x00,   // CS_FILTERING
-+};
-+
-+static char data_CS_SCAN_POS[] = {
-+	0x00, 0x00, 0x00, 0x00, 0x00,   // CS_SCAN_POS_0x
-+	0x00, 0x00, 0x00, 0x00, 0x00,   // CS_SCAN_POS_1x
-+	0x32, 0x00, 0x32, 0x32, 0x32,   // CS_FINGER_TH_0x
-+	0x00, 0x00, 0x00, 0x00, 0x32,   // CS_FINGER_TH_1x
-+	0x14, 0x00, 0x0C, 0x0A, 0x14,   // CS_IDAC_0x
-+	0x00, 0x00, 0x00, 0x00, 0x0D    // CS_IDAC_1x
-+};
-+
-+static char data_SLEEP[] = {
-+	0x00,   // SLEEP_PIN
-+	0x20,   // SLEEP_CTRL
-+	0x00,   // SLEEP_SA_CTR
-+};
-+
-+int capsense_config(char address)
-+{
-+	printf("Setting default capsense configuration at i2c address 0x%02X...\n", address);
-+
-+	//entering setup operation mode
-+	if ( capsense_write(address, CAPSENSE_COMMAND_REG, CAPSENSE_CMD_SETUP_OPERATION_MODE) != 0 ) {
-+		printf("CAPSENSE_COMMAND_REG SETUP_OPERATION_MODE\n");
-+		return 1;
-+   	}
-+	if ( capsense_write_N(address, CAPSENSE_REG_GPIO_ENABLE, data_GPIO_ENABLE, sizeof(data_GPIO_ENABLE)) != 0 ) {
-+		printf("CAPSENSE_REG_GPIO_ENABLE\n");
-+		return 1;
-+   	}
-+	if ( capsense_write_N(address, CAPSENSE_REG_CS_ENABLE, data_CS_ENABLE, sizeof(data_CS_ENABLE)) != 0 ) {
-+		printf("CAPSENSE_REG_CS_ENABLE\n");
-+		return 1;
-+   	}
-+	if ( capsense_write_N(address, CAPSENSE_REG_OUTPUT_PORT, data_OUTPUT_PORT, sizeof(data_OUTPUT_PORT)) != 0 ) {
-+		printf("CAPSENSE_REG_OUTPUT_PORT\n");
-+		return 1;
-+   	}
-+	if ( capsense_write_N(address, CAPSENSE_REG_OP_SEL_0, data_OP_SEL, sizeof(data_OP_SEL)) != 0 ) {
-+		printf("CAPSENSE_REG_OP_SEL_0\n");
-+		return 1;
-+   	}
-+	if ( capsense_write_N(address, CAPSENSE_REG_CS_NOISE_TH, data_CS_NOISE_TH, sizeof(data_CS_NOISE_TH)) != 0 ) {
-+		printf("CAPSENSE_REG_CS_NOISE_TH\n");
-+		return 1;
-+   	}
-+	if ( capsense_write_N(address, CAPSENSE_REG_CS_SCAN_POS, data_CS_SCAN_POS, sizeof(data_CS_SCAN_POS)) != 0 ) {
-+		printf("CAPSENSE_REG_CS_SCAN_POS\n");
-+		return 1;
-+   	}
-+	if ( capsense_write_N(address, CAPSENSE_REG_SLEEP_PIN, data_SLEEP, sizeof(data_SLEEP)) != 0 ) {
-+		printf("CAPSENSE_REG_SLEEP_PIN\n");
-+		return 1;
-+   	}
-+	if ( capsense_write(address, CAPSENSE_COMMAND_REG, CAPSENSE_CMD_NORMAL_OPERATION_MODE) != 0 ) {
-+		printf("CAPSENSE_COMMAND_REG NORMAL_OPERATION_MODE\n");
-+		return 1;
-+   	}
-+
-+	printf("...done.\n");
-+
-+	return 0;
-+}
-+
-+void capsense_store_nvm(char address)
-+{
-+	//storing the new current configuration to NVM
-+	printf("Storing capsense configuration to NVM\n");
-+	capsense_write(address, CAPSENSE_COMMAND_REG, CAPSENSE_CMD_STORE_TO_NVM);
-+}
-+
-+#endif /* CONFIG_CAPSENSE_CY8C201XX */
-Index: u-boot-1.3.2/drivers/i2c/Makefile
-===================================================================
---- u-boot-1.3.2.orig/drivers/i2c/Makefile
-+++ u-boot-1.3.2/drivers/i2c/Makefile
-@@ -29,6 +29,7 @@ COBJS-y += fsl_i2c.o
- COBJS-y += omap1510_i2c.o
- COBJS-y += omap24xx_i2c.o
- COBJS-y += tsi108_i2c.o
-+COBJS-y += CY8C201xx.o
- 
- COBJS	:= $(COBJS-y)
- SRCS 	:= $(COBJS:.o=.c)
-Index: u-boot-1.3.2/include/capsense.h
-===================================================================
---- /dev/null
-+++ u-boot-1.3.2/include/capsense.h
-@@ -0,0 +1,95 @@
-+/*
-+ * (C) Copyright 2008
-+ * Alexandre Coffignal, CénoSYS, alexandre.coffignal@cenosys.com
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USCY8C201xx.c:234:A
-+ */
-+
-+/*
-+ * CapSense Express touch-sensing buttons.
-+ */
-+#ifndef _CAPSENSE_H_
-+#define _CAPSENSE_H_
-+
-+#if defined(CONFIG_CAPSENSE_CY8C201XX)
-+
-+#define CONFIG_CAPSENSE				/* We have a Capsense */
-+
-+#ifndef CONFIG_CAPSENSE_SENSORS
-+/*config for CY3218-CAPEXP1*/
-+#define CONFIG_CAPSENSE_LED				{0x05,0x02} // port 0-{0,3} port 1-{2}
-+#define CONFIG_CAPSENSE_SENSOR			{0x02,0x0C} // port 0-{2} port 1-{3,4}
-+#endif
-+#endif /* CONFIG_CAPSENSE_SENSORS */
-+
-+extern int capsense_read(int address, int reg);
-+extern int capsense_write(int address, int reg, int val);
-+extern int capsense_get_state(int address,char port);
-+extern int capsense_change_i2c_address(char old_address,char new_address);
-+extern int capsense_config(char address);
-+extern void capsense_store_nvm(char address);
-+#endif
-+
-+#if !defined(CFG_CAPSENSE_BUS_NUM)
-+#define CFG_CAPSENSE_BUS_NUM		1
-+
-+//-----------------------------------------------
-+// Register Map and corresponding constants
-+//-----------------------------------------------
-+
-+
-+#define CAPSENSE_REG_STATUS_PORT                          0x02
-+#define CAPSENSE_REG_OUTPUT_PORT                          0x04
-+#define CAPSENSE_REG_CS_ENABLE                            0x06
-+#define CAPSENSE_REG_GPIO_ENABLE                          0x08
-+#define CAPSENSE_REG_INVERSION_MASK                       0x0A
-+#define CAPSENSE_REG_INT_MASK                             0x0C
-+#define CAPSENSE_REG_STATUS_HOLD_MSK                      0x0E
-+#define CAPSENSE_REG_DRIVE_MODE                           0x10
-+#define CAPSENSE_REG_OP_SEL_0                             0x1C
-+#define CAPSENSE_REG_OP_SEL_1                             0x35
-+#define CAPSENSE_REG_CS_NOISE_TH                          0x4E
-+#define CAPSENSE_REG_CS_SETL_TIME                         0x50
-+#define CAPSENSE_REG_CS_OTH_SET                           0x51
-+#define CAPSENSE_REG_CS_HYSTERESIS                        0x52
-+#define CAPSENSE_REG_CS_DEBOUNCE                          0x53
-+#define CAPSENSE_REG_CS_NEG_NOISE_TH                      0x54
-+#define CAPSENSE_REG_CS_SCAN_POS			  0x57
-+#define CAPSENSE_REG_CS_FINGER_TH                         0x61
-+#define CAPSENSE_REG_CS_IDAC                              0x6B
-+#define CAPSENSE_REG_CS_SLID_CONFIG                       0x75
-+#define CAPSENSE_REG_CS_SLID_MUL                          0x77
-+#define CAPSENSE_REG_I2C_DEV_LOCK			  0x79
-+#define CAPSENSE_REG_DEVICE_ID                            0x7A
-+#define CAPSENSE_REG_I2C_ADDR_DM		          0x7C
-+#define CAPSENSE_REG_SLEEP_PIN                            0x7E
-+#define CAPSENSE_REG_SLEEP_CTRL                           0x7F
-+#define CAPSENSE_REG_SLEEP_SA_CTR                         0x80
-+#define CAPSENSE_REG_CS_READ_BUTTON                       0x81
-+#define CAPSENSE_REG_CS_READ_BL                           0x82
-+#define CAPSENSE_REG_READ_STATUS                          0x88
-+#define CAPSENSE_REG_READ_CEN_POS                         0x8A
-+
-+#define CAPSENSE_COMMAND_REG                              0xA0
-+
-+#define CAPSENSE_CMD_STORE_TO_NVM                          0x01
-+#define CAPSENSE_CMD_NORMAL_OPERATION_MODE                 0x07
-+#define CAPSENSE_CMD_SETUP_OPERATION_MODE                  0x08
-+
-+#endif /* _CAPSENSE_H_ */
-Index: u-boot-1.3.2/include/configs/MPC8313ERDB.h
-===================================================================
---- u-boot-1.3.2.orig/include/configs/MPC8313ERDB.h
-+++ u-boot-1.3.2/include/configs/MPC8313ERDB.h
-@@ -407,6 +407,13 @@
- #define CFG_DTT_MAX_TEMP        70
- #define CFG_DTT_MIN_TEMP        -30
- 
-+/*Capsense touch sensing buttons (Cpe board)*/
-+#define CONFIG_CMD_CAPSENSE
-+#define CONFIG_CAPSENSE_CY8C201XX		1
-+#define CONFIG_CAPSENSE_I2C_ADDRESS		0x25
-+#define CONFIG_CAPSENSE_LEDS			{0x02,0x0F} // port 0-{1} port 1-{0,1,2,3}
-+#define CONFIG_CAPSENSE_SENSORS			{0x1D,0x10} // port 0-{0,2,3,4} port 1-{4}
-+
- /*
-  * Miscellaneous configurable options
-  */