packages/obsolete/nslu2: dropped all obsolete nslu2 kernels

64 files changed, 0 insertions, 17928 deletions

diff --git a/packages/obsolete/nslu2/.mtn2git_empty b/packages/obsolete/nslu2/.mtn2git_empty
deleted file mode 100644
index e69de29bb2..0000000000
--- a/packages/obsolete/nslu2/.mtn2git_empty
+++ /dev/null
diff --git a/packages/obsolete/nslu2/nslu2-kernel.inc b/packages/obsolete/nslu2/nslu2-kernel.inc
deleted file mode 100644
index 6b866100ca..0000000000
--- a/packages/obsolete/nslu2/nslu2-kernel.inc
+++ /dev/null
@@ -1,256 +0,0 @@
-# Standard definitions for any NSLU2 Linux kernel.
-# Include this file in a .bb which specifies, at least,
-# PN,PV,PR for the desired kernel
-#
-# Define the following *before* including this file as
-# required:
-#
-# N2K_PATCHES - full list of patches to apply, to add files
-#   generate a patch against /dev/null
-# N2K_SUFFIX - the suffix to add after 'zImage-' in the
-#   deploy/images directory, should identify the image config
-#
-# DEFAULT_PREFERENCE is set automagically in this file as
-# follows:
-#
-#  10  For *released* kernels
-#   8  For mm or ac patched versions of released kernels
-#   6  For rc patched kernels (release candidates)
-#   4  For mm or ac patched rc (release candidate) kernels
-#   2  For pre or bk versions
-#   0  For mm or ac patched pre or bk versions
-#
-# --------------------------------------------------------------
-#
-# Within this file bitbake variables local to the file are
-# named N2K_FOO
-#
-SECTION = "kernel"
-DESCRIPTION = "Linux kernel for the Linksys NSLU2 device"
-LICENSE = "GPL"
-
-DEPENDS += "devio-native"
-
-# Linux kernel source has the general form linux-X.Y.Z-patchP,
-# X.Y is the major version number, Z (which may have multiple
-# parts) is a sub-version and 'patch' is something like 'mm' or
-# 'ac' with a patch version.  The original bz2 archive will be
-# in a directory/file vX.Y/linux-X.Y.Z.tar.bz2.  The unpacked
-# source will be in the directory linux-X.Y.Z and this directory
-# name corresponds to the module directory (in /lib/modules).
-#
-# The corresponding .bb file should be called:
-#
-#	package_X.Y.Z-patchP
-#
-# Giving PN=package PV=X.Y.Z-patchP (and PR is set in the .bb
-# file).  Files, including the all important defconfig, are
-# searched for in the following directories (last one first):
-#
-#	nslu2-kernel/files
-#	nslu2-kernel/X.Y
-#	nslu2-kernel/X.Y.Z
-#	nslu2-kernel/X.Y.Z-patch
-#	nslu2-kernel/X.Y.Z-patchP
-#	package-X.Y.Z-patchP
-#
-# This allows sharing of patch files and other useful source!
-# To share a file or patch with an earlier version put it in
-# the shared directory - e.g. to use foo.patch on 2.6.11.2 and
-# 2.6.11.4 it should be in directory nslu2-kernel/2.6.11.
-#
-# Note that when there are multiple patches the X.Y.Z-patch form
-# uses base-patch (e.g. 2.6.12-mm) whereas X.Y.Z-patchP has the
-# full form, for example 2.6.12-rc3-mm1 (in the same case).
-
-#PN=package-name
-#PV=package-version (full)
-
-# The patch has the general form (rcN|preN|acN|mmN|bkN)* with the
-# separate patch items being separated by '-' characters.  The
-# rc patch is first and has the important property that it
-# requires the *preceding* kernel base version and that this
-# will be the source directory name.
-python () {
-    # The patches list may be empty.  This code starts with the base
-    # kernel version and steps through the patches.  Because the rc and
-    # pre patches actually require the *preceding* kernel version the code
-    # fixes that up appropriately.
-    pv = bb.data.getVar("PV",d,1).split('-')
-    kernel = pv[0].split('.')
-    base = pv[0]
-    name = [base]
-    major = '.'.join(name[0].split('.')[0:2])
-    minor = '.'.join(name[0].split('.')[0:3])
-    patch_uri = [ None ]
-    filedir = "${FILE_DIRNAME}/nslu2-kernel/%s"
-    # This entry will become the last one (everything is inserted before it)
-    filepath = [ filedir % "files" ]
-    pref = 10
-    mmac = 0
-    for patch in pv[1:]:
-	name.append(patch)
-	pname = '-'.join(name)
-    	if patch[0:2] == "rc" or patch[0:3] == "pre":
-	    patch_uri.append("${KERNELORG_MIRROR}/pub/linux/kernel/v%s/testing/patch-%s.bz2;patch=1;pname=%s" % (major, pname, pname))
-	    kernel[-1] = str(int(kernel[-1]) - 1)
-	    if patch[0:2] == "rc" and pref == 10:
-	    	pref = 6
-		filepath[0:0] = [ filedir % name[0] ]
-		filepath[0:0] = [ filedir % (name[0] + "-rc") ]
-	    else:
-	    	pref = 2
-	elif patch[0:2] == "bk" or patch[0:3] == "git":
-	    patch_uri.append("${KERNELORG_MIRROR}/pub/linux/kernel/v%s/snapshots/patch-%s.bz2;patch=1;pname=%s" % (major, pname, pname))
-	    pref = 2
-	elif patch[0:2] == "ac":
-	    patch_uri.append("${KERNELORG_MIRROR}/pub/linux/kernel/people/alan/linux-%s/%s/patch-%s" % (major, base, pname))
-	    mmac = 2
-	    filepath[0:0] = [ filedir % (name[0] + "-ac") ]
-	elif patch[0:2] == "mm":
-	    patch_uri.append("${KERNELORG_MIRROR}/pub/linux/kernel/people/akpm/patches/%s/%s/%s/%s.bz2;patch=1;pname=%s" % (major, base, pname, pname, pname))
-	    mmac = 2
-	    filepath[0:0] = [ filedir % (name[0] + "-mm") ]
-	else:
-	    raise bb.build.FuncFailed("nslu2-kernel: patch %s not recognized in %s" % (patch, '-'.join(pv)))
-	filepath[0:0] = [ filedir % pname ]
-	base = pname
-
-    base = '.'.join(kernel)
-    patch_uri[0] = "${KERNELORG_MIRROR}/pub/linux/kernel/v%s/linux-%s.tar.bz2" % (major, base)
-    filepath[-1:-1] = [ filedir % base ]
-    if base != minor:
-	    filepath[-1:-1] = [ filedir % minor ]
-    filepath[-1:-1] = [ filedir % major ]
-
-    bb.data.setVar("N2K_SRCMAJ", major, d)
-    # bb.note("N2K_SRCMAJ := %s" % major)
-    bb.data.setVar("N2K_SRCVER", base, d)
-    # bb.note("N2K_SRCVER := %s" % base)
-    bb.data.setVar("N2K_SRCURI", ' '.join(patch_uri), d)
-    # bb.note("N2K_SRCURI := %s" % ' '.join(patch_uri))
-    bb.data.setVar("N2K_FILESPATH", ':'.join(filepath), d)
-    # bb.note("N2K_FILESPATH := %s" % ' '.join(filepath))
-    bb.data.setVar("DEFAULT_PREFERENCE", pref-mmac, d)
-    # bb.note("DEFAULT_PREFERENCE := %s" % (pref-mmac))
-}
-
-# FILESPATH: this list is in order last-searched-first, therefore
-# the first entry is the *latest* and/or most specific
-FILESPATH = "${FILE_DIRNAME}/${P}:${N2K_FILESPATH}"
-
-# The working directory will be the 'base' version (which may not be the
-# same as implied by the PV variable because it corresponds to the prior
-# minor version for rc and pre patched versions).
-S = "${WORKDIR}/linux-${N2K_SRCVER}"
-
-# N2K_PATCHES is the list of patches.
-N2K_PATCHES ?= ""
-
-# Image suffix - actually set in conf/machine/nslu2.conf as it is also
-# used by anything which needs to know the name of the generated image.
-# Should be overridden in the distro if patches or defconfig are changed.
-N2K_SUFFIX ?= "nslu2${SITEINFO_ENDIANESS}"
-
-SRC_URI  = "${N2K_SRCURI}"
-SRC_URI += "${N2K_PATCHES}"
-SRC_URI += "file://defconfig"
-
-COMPATIBLE_HOST = 'arm.*-linux'
-
-inherit kernel
-
-ARCH = "arm"
-KERNEL_IMAGETYPE = "zImage"
-# To specify the console set KERNEL_CONSOLE in the .bb file.
-# CMDLINE_ROOT contains the boot options, CMDLINE_KERNEL_OPTIONS
-# contains the things for a specific kernel.
-CMDLINE_KERNEL_OPTIONS ?= "reboot=s"
-CMDLINE_ROOT ?= "root=/dev/mtdblock4 rw rootfstype=jffs2 mem=32M@0x00000000 init=/linuxrc"
-# Add distro specific debug (or non-debug) options to this
-CMDLINE_DEBUG ?= ""
-CMDLINE = "${CMDLINE_ROOT} ${CMDLINE_KERNEL_OPTIONS} ${CMDLINE_DEBUG} ${CMDLINE_CONSOLE}"
-
-# Set EXTRAVERSION and LOCALVERSION to "" so that the kernel version
-# remains pinned to the x.y.z form, also turn off the directory
-# printing which provides almost all the output of an incremental build.
-EXTRA_OEMAKE += "EXTRAVERSION="
-EXTRA_OEMAKE += "LOCALVERSION="
-EXTRA_OEMAKE += "MAKEFLAGS='--no-print-directory'"
-
-addtask unpacklocal before do_patch after do_unpack
-
-# NOTE: in MM kernel builds the config options (oldconfig, menuconfig
-# and so on) do not allow an option to be overridden, so the following
-# removes the options which must be changed.
-do_configure_prepend() {
-	rm -f ${S}/.config
-	echo "CONFIG_CMDLINE=\"${CMDLINE}\"" >>'${S}/.config'
-	if test '${SITEINFO_ENDIANESS}' = be
-	then
-		echo 'CONFIG_CPU_BIG_ENDIAN=y' >>'${S}/.config'
-	fi
-	if test '${SLUGOS_IMAGESEX}' = big-endian
-	then
-		echo 'CONFIG_JFFS2_BIG_ENDIAN=y' >>'${S}/.config'
-	fi
-	if test '${SLUGOS_IMAGESEX}' = little-endian
-	then
-		echo 'CONFIG_JFFS2_LITTLE_ENDIAN=y' >>'${S}/.config'
-	fi
-	sed -e '/CONFIG_CPU_BIG_ENDIAN/d' -e '/CONFIG_CMDLINE=/d' \
-		-e '/CONFIG_JFFS2_NATIVE_ENDIAN=/d' \
-		-e '/CONFIG_JFFS2_BIG_ENDIAN=/d' \
-		-e '/CONFIG_JFFS2_LITTLE_ENDIAN=/d' \
-		'${WORKDIR}/defconfig' >>'${S}/.config'
-	rm -rf ${S}/include/asm-arm/arch ${S}/include/asm-arm/proc \
-	       ${S}/include/asm-arm/.proc ${S}/include/asm-arm/.arch
-}
-
-# This function adds the required prefix to the image to deal with two
-# problems:
-#
-# 1) The machine type set by RedBoot is wrong - the type for an ixdp425, not an NSLU2
-#    e3a01c02 e3811055
-# 2) For LE kernels it is necessary to prefix change-to-le code to the kernel image:
-#    ee110f10 e3c00080 ee010f10
-#    and to byte swap the (LE) image to match the BE flash layout
-#
-# The argument to the function is the destination directory
-redboot_fixup_armeb() {
-	rm -f "$1".new
-	devio '<<arch/${ARCH}/boot/${KERNEL_IMAGETYPE}' >"$1".new \
-		'wb 0xe3a01c02,4' \
-		'wb 0xe3811055,4' \
-		'cp$'
-	mv "$1".new "$1"
-}
-
-redboot_fixup_arm() {
-	rm -f "$1".new
-	devio '<<arch/${ARCH}/boot/${KERNEL_IMAGETYPE}' >"$1".new \
-		'wb 0xe3a01c02,4' \
-		'wb 0xe3811055,4' \
-		'wb 0xee110f10,4' \
-		'wb 0xe3c00080,4' \
-		'wb 0xee010f10,4' \
-		'xp $,4' || {
-		echo 'ERROR: arch/${ARCH}/boot/${KERNEL_IMAGETYPE}: failed to byteswap zImage' >&2
-		return 1
-	}
-	mv "$1".new "$1"
-}
-
-do_install_append() {
-	redboot_fixup '${STAGING_KERNEL_DIR}/${KERNEL_IMAGETYPE}'
-}
-
-do_deploy[dirs] = "${S}"
-do_deploy() {
-        install -d ${DEPLOY_DIR_IMAGE}
-	redboot_fixup '${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${N2K_SUFFIX}'
-}
-
-addtask deploy before do_build after do_compile
-
-COMPATIBLE_MACHINE = "nslu2"
diff --git a/packages/obsolete/nslu2/nslu2-kernel/.mtn2git_empty b/packages/obsolete/nslu2/nslu2-kernel/.mtn2git_empty
deleted file mode 100644
index e69de29bb2..0000000000
--- a/packages/obsolete/nslu2/nslu2-kernel/.mtn2git_empty
+++ /dev/null
diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6.11-mm/.mtn2git_empty b/packages/obsolete/nslu2/nslu2-kernel/2.6.11-mm/.mtn2git_empty
deleted file mode 100644
index e69de29bb2..0000000000
--- a/packages/obsolete/nslu2/nslu2-kernel/2.6.11-mm/.mtn2git_empty
+++ /dev/null
diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6.11-mm/bootramdisk.patch b/packages/obsolete/nslu2/nslu2-kernel/2.6.11-mm/bootramdisk.patch
deleted file mode 100644
index c03a0d9cda..0000000000
--- a/packages/obsolete/nslu2/nslu2-kernel/2.6.11-mm/bootramdisk.patch
+++ /dev/null
@@ -1,13 +0,0 @@
---- linux-2.6.11/arch/arm/kernel/setup.c.orig	Mon Mar  7 09:41:40 2005
-+++ linux-2.6.11/arch/arm/kernel/setup.c	Mon Mar  7 09:42:15 2005
-@@ -431,8 +431,10 @@
- 	rd_prompt = prompt;
- 	rd_doload = doload;
- 
-+#if 0 /* rd_size is not exported by 2.6.11-mm1 */
- 	if (rd_sz)
- 		rd_size = rd_sz;
-+#endif
- #endif
- }
- 
diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6.11-mm/defconfig b/packages/obsolete/nslu2/nslu2-kernel/2.6.11-mm/defconfig
deleted file mode 100644
index 7ca968ac66..0000000000
--- a/packages/obsolete/nslu2/nslu2-kernel/2.6.11-mm/defconfig
+++ /dev/null
@@ -1,1204 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-mm4
-# Sat May  7 11:48:09 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-# CONFIG_KALLSYMS is not set
-# CONFIG_BASE_FULL is not set
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=1
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_CAMELOT is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-CONFIG_ARCH_IXP4XX=y
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
-
-#
-# Intel IXP4xx Implementation Options
-#
-
-#
-# IXP4xx Platforms
-#
-# CONFIG_ARCH_AVILA is not set
-# CONFIG_ARCH_ADI_COYOTE is not set
-# CONFIG_ARCH_IXDP425 is not set
-# CONFIG_MACH_IXDPG425 is not set
-# CONFIG_MACH_IXDP465 is not set
-CONFIG_ARCH_NSLU2=y
-# CONFIG_ARCH_PRPMC1100 is not set
-# CONFIG_MACH_GTWX5715 is not set
-
-#
-# IXP4xx Options
-#
-CONFIG_IXP4XX_INDIRECT_PCI=y
-CONFIG_DMABOUNCE=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_MINICACHE=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_ARM_THUMB_INTERWORK is not set
-# CONFIG_ARCH_XSCALE is not set
-CONFIG_CPU_BIG_ENDIAN=y
-CONFIG_XSCALE_PMU=y
-
-#
-# General setup
-#
-CONFIG_PCI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_PCI_LEGACY_PROC is not set
-# CONFIG_PCI_NAMES is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# At least one math emulation must be selected
-#
-CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_FASTFPE is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_PM is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_ARTHUR is not set
-CONFIG_CMDLINE="root=/dev/mtdblock4 rw rootfstype=jffs2 mem=32M@0x00000000 init=/linuxrc console=ttyS0,115200n8"
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-CONFIG_MTD_IXP4XX=y
-# CONFIG_MTD_EDB7312 is not set
-# CONFIG_MTD_PCI is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=4
-CONFIG_BLK_DEV_RAM_SIZE=10240
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-CONFIG_IOSCHED_DEADLINE=y
-# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=m
-CONFIG_PACKET_MMAP=y
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-CONFIG_INET_IPCOMP=m
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
-CONFIG_IPX=m
-# CONFIG_IPX_INTERN is not set
-CONFIG_ATALK=m
-CONFIG_DEV_APPLETALK=y
-CONFIG_IPDDP=m
-CONFIG_IPDDP_ENCAP=y
-CONFIG_IPDDP_DECAP=y
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-CONFIG_NET_PKTGEN=m
-# CONFIG_KGDBOE is not set
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_RX is not set
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_SCO=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-# CONFIG_BT_HIDP is not set
-
-#
-# Bluetooth device drivers
-#
-CONFIG_BT_HCIUSB=m
-CONFIG_BT_HCIUSB_SCO=y
-# CONFIG_BT_HCIUART is not set
-# CONFIG_BT_HCIBCM203X is not set
-# CONFIG_BT_HCIBPA10X is not set
-# CONFIG_BT_HCIBFUSB is not set
-# CONFIG_BT_HCIVHCI is not set
-# CONFIG_IEEE80211 is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_SMC91X is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-CONFIG_NET_RADIO=y
-
-#
-# Obsolete Wireless cards support (pre-802.11)
-#
-# CONFIG_STRIP is not set
-
-#
-# Wireless 802.11b ISA/PCI cards support
-#
-# CONFIG_HERMES is not set
-# CONFIG_ATMEL is not set
-
-#
-# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
-#
-# CONFIG_PRISM54 is not set
-# CONFIG_HOSTAP is not set
-CONFIG_NET_WIRELESS=y
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
-CONFIG_NETCONSOLE=m
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_ISCSI_IF is not set
-
-#
-# SCSI Transport Attributes
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-# CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=2
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=16
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_IXP4XX_WATCHDOG=y
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_RTC=m
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_IOP3XX is not set
-# CONFIG_I2C_ISA is not set
-CONFIG_I2C_IXP4XX=y
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_SCx200_ACB is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Hardware Sensors Chip support
-#
-CONFIG_I2C_SENSOR=y
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-
-#
-# Other I2C Chip support
-#
-CONFIG_SENSORS_EEPROM=y
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-CONFIG_SENSORS_X1205=y
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=m
-# CONFIG_EXT2_FS_XATTR is not set
-CONFIG_EXT3_FS=m
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=m
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=m
-CONFIG_REISER4_FS=m
-# CONFIG_REISER4_DEBUG is not set
-CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-# CONFIG_REISERFS_FS_XATTR is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-CONFIG_AUTOFS4_FS=m
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_ZISOFS_FS=m
-CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="utf8"
-CONFIG_NTFS_FS=m
-# CONFIG_NTFS_DEBUG is not set
-CONFIG_NTFS_RW=y
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_NAND is not set
-# CONFIG_JFFS2_FS_NOR_ECC is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V4 is not set
-CONFIG_NFSD_TCP=y
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_SUNRPC=m
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="utf8"
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=m
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# Misc devices
-#
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
-
-#
-# USB Bluetooth TTY can only be used with disabled Bluetooth subsystem
-#
-# CONFIG_USB_ACM is not set
-CONFIG_USB_PRINTER=m
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
-CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_RW_DETECT is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-
-#
-# USB Input Devices
-#
-# CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB Multimedia devices
-#
-# CONFIG_USB_DABUSB is not set
-
-#
-# Video4Linux support is needed for USB Multimedia device support
-#
-
-#
-# USB Network Adapters
-#
-CONFIG_USB_CATC=m
-CONFIG_USB_KAWETH=m
-CONFIG_USB_PEGASUS=m
-CONFIG_USB_RTL8150=m
-CONFIG_USB_USBNET=m
-
-#
-# USB Host-to-Host Cables
-#
-CONFIG_USB_ALI_M5632=y
-CONFIG_USB_AN2720=y
-CONFIG_USB_BELKIN=y
-CONFIG_USB_GENESYS=y
-CONFIG_USB_NET1080=y
-CONFIG_USB_PL2301=y
-CONFIG_USB_KC2190=y
-
-#
-# Intelligent USB Devices/Gadgets
-#
-CONFIG_USB_ARMLINUX=y
-CONFIG_USB_EPSON2888=y
-CONFIG_USB_ZAURUS=y
-CONFIG_USB_CDCETHER=y
-
-#
-# USB Network Adapters
-#
-CONFIG_USB_AX8817X=y
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_USB_MON is not set
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-CONFIG_USB_SERIAL=m
-CONFIG_USB_SERIAL_GENERIC=y
-CONFIG_USB_SERIAL_BELKIN=m
-CONFIG_USB_SERIAL_WHITEHEAT=m
-CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
-CONFIG_USB_SERIAL_CYPRESS_M8=m
-CONFIG_USB_SERIAL_EMPEG=m
-CONFIG_USB_SERIAL_FTDI_SIO=m
-CONFIG_USB_SERIAL_VISOR=m
-CONFIG_USB_SERIAL_IPAQ=m
-CONFIG_USB_SERIAL_IR=m
-CONFIG_USB_SERIAL_EDGEPORT=m
-CONFIG_USB_SERIAL_EDGEPORT_TI=m
-CONFIG_USB_SERIAL_GARMIN=m
-CONFIG_USB_SERIAL_IPW=m
-CONFIG_USB_SERIAL_KEYSPAN_PDA=m
-# CONFIG_USB_SERIAL_KEYSPAN is not set
-CONFIG_USB_SERIAL_KLSI=m
-CONFIG_USB_SERIAL_KOBIL_SCT=m
-CONFIG_USB_SERIAL_MCT_U232=m
-CONFIG_USB_SERIAL_PL2303=m
-CONFIG_USB_SERIAL_SAFE=m
-# CONFIG_USB_SERIAL_SAFE_PADDED is not set
-CONFIG_USB_SERIAL_TI=m
-CONFIG_USB_SERIAL_CYBERJACK=m
-CONFIG_USB_SERIAL_XIRCOM=m
-CONFIG_USB_SERIAL_OMNINET=m
-CONFIG_USB_EZUSB=y
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB ATM/DSL drivers
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=m
-CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_DES=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_TEST=m
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=m
-CONFIG_CRC32=y
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6.11-mm/reiser4.patch b/packages/obsolete/nslu2/nslu2-kernel/2.6.11-mm/reiser4.patch
deleted file mode 100644
index b752ddac98..0000000000
--- a/packages/obsolete/nslu2/nslu2-kernel/2.6.11-mm/reiser4.patch
+++ /dev/null
@@ -1,617 +0,0 @@
---- linux-2.6.11/.pc/reiser4/fs/reiser4/plugin/disk_format/disk_format40.c	2005-03-27 21:36:10.656270448 -0800
-+++ linux-2.6.11/fs/reiser4/plugin/disk_format/disk_format40.c	2005-03-27 23:39:18.967076480 -0800
-@@ -467,19 +467,15 @@
- 	return 0;
- }
- 
--#define FORMAT40_ROOT_LOCALITY 41
--#define FORMAT40_ROOT_OBJECTID 42
-+#define FORMAT40_ROOT_LOCALITY 41ull
-+#define FORMAT40_ROOT_OBJECTID 42ull
- 
- /* plugin->u.format.root_dir_key */
- reiser4_internal const reiser4_key *
- root_dir_key_format40(const struct super_block *super UNUSED_ARG)
- {
- 	static const reiser4_key FORMAT40_ROOT_DIR_KEY = {
--		.el = {{(FORMAT40_ROOT_LOCALITY << 4) | KEY_SD_MINOR},
--#if REISER4_LARGE_KEY
--		       {0ull},
--#endif
--		       {FORMAT40_ROOT_OBJECTID}, {0ull}}
-+		.el = { KEY_INIT(KEY_SD_MINOR,FORMAT40_ROOT_LOCALITY,0ull,0,FORMAT40_ROOT_OBJECTID,0ull) }
- 	};
- 
- 	return &FORMAT40_ROOT_DIR_KEY;
---- linux-2.6.11/.pc/reiser4/fs/reiser4/plugin/disk_format/disk_format40.h	2005-03-27 21:24:00.618253096 -0800
-+++ linux-2.6.11/fs/reiser4/plugin/disk_format/disk_format40.h	2005-03-27 21:24:02.747929336 -0800
-@@ -49,7 +49,7 @@
- 	/*  70 */ d16 formatting_policy;
- 	/*  72 */ d64 flags;
- 	/*  72 */ char not_used[432];
--} format40_disk_super_block;
-+} PACKED64 format40_disk_super_block;
- 
- /* format 40 specific part of reiser4_super_info_data */
- typedef struct format40_super_info {
---- linux-2.6.11/.pc/reiser4/fs/reiser4/plugin/file/invert.c	2005-03-27 21:24:00.625252032 -0800
-+++ linux-2.6.11/fs/reiser4/plugin/file/invert.c	2005-03-27 21:24:02.747929336 -0800
-@@ -240,14 +240,14 @@
- typedef struct flow_header {
- 	d32 fl_magic;
- 	d16 fl_nr;		/* number of subfiles in the flow */
--};
-+} PACKED32;
- 
- typedef struct subfile_header {
- 	d32 sh_magic;		/* subfile magic */
- 	d16 sh_type;		/* type of subfile: light-weight, ordinary, invert */
- 	d16 sh_arg_len;		/* lenght of lookup argument (filename, key) */
- 	d32 sh_body_len;	/* lenght of subfile body */
--};
-+} PACKED32;
- 
- /* functions to get/set fields of flow header */
- 
---- linux-2.6.11/.pc/reiser4/fs/reiser4/plugin/item/static_stat.c	2005-03-27 21:24:00.648248536 -0800
-+++ linux-2.6.11/fs/reiser4/plugin/item/static_stat.c	2005-03-27 21:34:27.331978128 -0800
-@@ -19,6 +19,38 @@
- 
- /* see static_stat.h for explanation */
- 
-+/* compile time verify of the data structure sizes and alignments */
-+static inline void
-+r4static_stat_verify(void)
-+{
-+	/* All these structures are PACKED, so the __alignof__ should
-+	 * be 1.  The sizes need to be correct as they map to disk
-+	 * structures.
-+	 */
-+	cassert(sizeof (reiser4_stat_data_base) == 2);
-+	/* cassert(sizeof (reiser4_light_weight_stat) == 16);
-+	 * 14 bytes, comments in code do not take into account PACKED!
-+	 */
-+	cassert(sizeof (reiser4_light_weight_stat) == 14);
-+	cassert(sizeof (reiser4_unix_stat) == 28);
-+	cassert(sizeof (reiser4_symlink_stat) == 0);
-+	cassert(sizeof (reiser4_plugin_slot) == 4);
-+	cassert(sizeof (reiser4_plugin_stat) == 2);
-+	cassert(sizeof (reiser4_flags_stat) == 4);
-+	/* cassert(sizeof (reiser4_capabilities_stat) == 16);
-+	 * comments in the file look wrong - capabilities are 2 x d32
-+	 * not 2 x d64 in the declaration.
-+	 */
-+	cassert(sizeof (reiser4_capabilities_stat) == 8);
-+	cassert(sizeof (reiser4_cluster_stat) == 1);
-+	cassert(sizeof (reiser4_crypto_stat) == 2);
-+	/* cassert(sizeof (reiser4_large_times_stat) == 24);
-+	 * should be 12 bytes - 3 x d32, probably a bug in the def in
-+	 * the header file (meant to be 3 x d64?)
-+	 */
-+	cassert(sizeof (reiser4_large_times_stat) == 12);
-+}
-+
- /* helper function used while we are dumping/loading inode/plugin state
-     to/from the stat-data. */
- 
---- linux-2.6.11/.pc/reiser4/fs/reiser4/plugin/item/acl.h	2005-03-27 21:24:00.629251424 -0800
-+++ linux-2.6.11/fs/reiser4/plugin/item/acl.h	2005-03-27 21:24:02.749929032 -0800
-@@ -26,7 +26,7 @@
- 	obj_key_id id;
- 	/* file name. Null terminated string. */
- 	d8 name[0];
--} directory_entry_format;
-+} PACKEDt(obj_key_id) directory_entry_format;
- 
- void print_de(const char *prefix, coord_t * coord);
- int extract_key_de(const coord_t * coord, reiser4_key * key);
---- linux-2.6.11/.pc/reiser4/fs/reiser4/plugin/item/cde.h	2005-03-27 21:24:00.632250968 -0800
-+++ linux-2.6.11/fs/reiser4/plugin/item/cde.h	2005-03-27 21:24:02.750928880 -0800
-@@ -15,12 +15,12 @@
- typedef struct cde_unit_header {
- 	de_id hash;
- 	d16 offset;
--} cde_unit_header;
-+} PACKEDt2(de_id,d16) cde_unit_header;
- 
- typedef struct cde_item_format {
- 	d16 num_of_entries;
- 	cde_unit_header entry[0];
--} cde_item_format;
-+} PACKEDt2(d16,cde_unit_header) cde_item_format;
- 
- typedef struct cde_entry {
- 	const struct inode *dir;
---- linux-2.6.11/.pc/reiser4/fs/reiser4/plugin/item/extent.h	2005-03-27 21:32:13.758284416 -0800
-+++ linux-2.6.11/fs/reiser4/plugin/item/extent.h	2005-03-27 21:32:30.786695704 -0800
-@@ -7,7 +7,7 @@
- typedef struct {
- 	reiser4_dblock_nr start;
- 	reiser4_dblock_nr width;
--} reiser4_extent;
-+} PACKED64 reiser4_extent;
- 
- typedef struct extent_stat {
- 	int unallocated_units;
---- linux-2.6.11/.pc/reiser4/fs/reiser4/plugin/item/internal.h	2005-03-27 21:33:08.971890672 -0800
-+++ linux-2.6.11/fs/reiser4/plugin/item/internal.h	2005-03-27 22:15:43.290575208 -0800
-@@ -13,7 +13,7 @@
- typedef struct internal_item_layout {
- 	/*  0 */ reiser4_dblock_nr pointer;
- 	/*  4 */
--} internal_item_layout;
-+} PACKED64 internal_item_layout;
- 
- struct cut_list;
- 
---- linux-2.6.11/.pc/reiser4/fs/reiser4/plugin/item/sde.h	2005-03-27 21:24:00.646248840 -0800
-+++ linux-2.6.11/fs/reiser4/plugin/item/sde.h	2005-03-27 21:24:02.750928880 -0800
-@@ -26,7 +26,7 @@
- 	obj_key_id id;
- 	/* file name. Null terminated string. */
- 	d8 name[0];
--} directory_entry_format;
-+} PACKEDt(obj_key_id) directory_entry_format;
- 
- void print_de(const char *prefix, coord_t * coord);
- int extract_key_de(const coord_t * coord, reiser4_key * key);
---- linux-2.6.11/.pc/reiser4/fs/reiser4/plugin/node/node40.c	2005-03-27 21:24:00.654247624 -0800
-+++ linux-2.6.11/fs/reiser4/plugin/node/node40.c	2005-03-27 21:35:08.677692624 -0800
-@@ -32,6 +32,22 @@
-    magic (32)
-    flush_time (32)
- */
-+/* compile time verify of the data structure sizes and alignments */
-+static inline void
-+r4node40_stat_verify(void)
-+{
-+	/* The alignment of these structures is intended to be '1', but
-+	 * it doesn't matter so long as the size is right.
-+	 */
-+	cassert(sizeof (common_node_header) == 2);
-+	cassert(sizeof (node40_header) ==  28);
-+#if REISER4_LARGE_KEY
-+	cassert(sizeof (item_header40) == 38);
-+#else
-+	cassert(sizeof (item_header40) == 30);
-+#endif
-+}
-+
- /* NIKITA-FIXME-HANS: I told you guys not less than 10 times to not call it r4fs.  Change to "ReIs". */
- /* magic number that is stored in ->magic field of node header */
- static const __u32 REISER4_NODE_MAGIC = 0x52344653;	/* (*(__u32 *)"R4FS"); */
---- linux-2.6.11/.pc/reiser4/fs/reiser4/plugin/node/node.h	2005-03-27 21:24:00.656247320 -0800
-+++ linux-2.6.11/fs/reiser4/plugin/node/node.h	2005-03-27 21:24:02.753928424 -0800
-@@ -250,7 +250,7 @@
- 	/* identifier of node plugin. Must be located at the very beginning
- 	   of a node. */
- 	d16 plugin_id;
--} common_node_header;
-+} PACKED16 common_node_header;
- 
- /* __REISER4_NODE_H__ */
- #endif
---- linux-2.6.11/.pc/reiser4/fs/reiser4/debug.c	2005-03-27 21:24:00.563261456 -0800
-+++ linux-2.6.11/fs/reiser4/debug.c	2005-03-27 23:27:58.569512632 -0800
-@@ -75,6 +75,72 @@
- 	va_list args;
- 
- 	/*
-+	 * this is here to make sure that we don't compile code which we
-+	 * know a-priori will panic, or fail without panicing, since this
-+	 * compiles first if you find a duplicate case label error then
-+	 * you need to rewrite this code to match your compiler.
-+	 */
-+	cassert(sizeof (d8) == 1);
-+	cassert(__alignof__ (d8) == 1);
-+	{
-+		struct {
-+			__u8 pad;
-+			d8 data;
-+		} PACKED8 test;
-+		cassert(sizeof test == 2);
-+		cassert(sizeof test.data == 1);
-+		cassert(__alignof__ test.data == 1);
-+		cassert(__alignof__ test == 1);
-+	}
-+	cassert(sizeof (d16) == 2);
-+	cassert(__alignof__ (d16) == 2);
-+	{
-+		struct {
-+			__u8 pad;
-+			d16 data;
-+		} PACKED16 test;
-+		cassert(sizeof test == 4);
-+		cassert(sizeof test.data == 2);
-+#if !__arm__
-+		cassert(__alignof__ test.data == 2);
-+#endif
-+		cassert(__alignof__ test == 2);
-+#if !__arm__
-+		cassert(test.data.datum - &test.pad == 2);
-+#endif
-+	}
-+	cassert(sizeof (d32) == 4);
-+	cassert(__alignof__ (d32) == 4);
-+	{
-+		struct {
-+			__u8 pad;
-+			d32 data;
-+		} PACKED32 test;
-+		cassert(sizeof test == 8);
-+		cassert(sizeof test.data == 4);
-+		cassert(__alignof__ test.data == 4);
-+		cassert(__alignof__ test == 4);
-+		cassert(test.data.datum - &test.pad == 4);
-+	}
-+	cassert(sizeof (d64) == 8);
-+	cassert(__alignof__ (d64) == 8);
-+	{
-+		struct {
-+			__u8 pad;
-+			d64 data;
-+		} PACKED64 test;
-+		cassert(sizeof test == 16);
-+		cassert(sizeof test.data == 8);
-+		cassert(__alignof__ test.data == 8);
-+		cassert(__alignof__ test == 8);
-+		cassert(test.data.datum - &test.pad == 8);
-+	}
-+
-+	/* This is just a test of a struct with a single d64 element. */
-+	cassert(sizeof (reiser4_dblock_nr) == 8);
-+	cassert(__alignof__(reiser4_dblock_nr) == 8);
-+
-+	/*
- 	 * check for recursive panic.
- 	 */
- 	if (in_panic == 0) {
---- linux-2.6.11/.pc/reiser4/fs/reiser4/flush_queue.c	2005-03-27 21:24:00.577259328 -0800
-+++ linux-2.6.11/fs/reiser4/flush_queue.c	2005-03-27 21:24:02.755928120 -0800
-@@ -447,7 +447,7 @@
- 
- 		/* If all write requests registered in this "fq" are done we up
- 		 * the semaphore. */
--		if (atomic_sub_and_test(bio->bi_vcnt, &fq->nr_submitted))
-+		if (atomic_sub_return(bio->bi_vcnt, &fq->nr_submitted) == 0)
- 			up(&fq->io_sem);
- 	}
- 
---- linux-2.6.11/.pc/reiser4/fs/reiser4/key.c	2005-03-27 22:42:43.481268784 -0800
-+++ linux-2.6.11/fs/reiser4/key.c	2005-03-27 23:42:53.958392832 -0800
-@@ -13,10 +13,10 @@
-    independent of key scheme. */
- static const reiser4_key MINIMAL_KEY = {
- 	.el = {
--		{0ull},
--		ON_LARGE_KEY({0ull},)
--		{0ull},
--		{0ull}
-+		{{0,0,0,0,0,0,0,0}},
-+		ON_LARGE_KEY({{0,0,0,0,0,0,0,0}},)
-+		{{0,0,0,0,0,0,0,0}},
-+		{{0,0,0,0,0,0,0,0}}
- 	}
- };
- 
-@@ -24,10 +24,10 @@
-    independent of key scheme. */
- static const reiser4_key MAXIMAL_KEY = {
- 	.el = {
--		{~0ull},
--		ON_LARGE_KEY({~0ull},)
--		{~0ull},
--		{~0ull}
-+		{{0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff}},
-+		ON_LARGE_KEY({{0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff}},)
-+		{{0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff}},
-+		{{0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff}}
- 	}
- };
- 
---- linux-2.6.11/.pc/reiser4/fs/reiser4/safe_link.c	2005-03-27 21:24:00.677244128 -0800
-+++ linux-2.6.11/fs/reiser4/safe_link.c	2005-03-27 21:24:02.756927968 -0800
-@@ -61,7 +61,7 @@
- 	reiser4_key sdkey; /* key of stat-data for the file safe-link is
- 			    * for */
- 	d64 size;          /* size to which file should be truncated */
--} safelink_t;
-+} PACKEDt2(reiser4_key, d64) safelink_t;
- 
- /*
-  * locality where safe-link items are stored. Next to the objectid of root
---- linux-2.6.11/.pc/reiser4/fs/reiser4/status_flags.c	2005-03-27 21:24:00.682243368 -0800
-+++ linux-2.6.11/fs/reiser4/status_flags.c	2005-03-27 21:24:02.756927968 -0800
-@@ -153,6 +153,7 @@
- 		 &statuspage->stacktrace[no])
- 
- 	GETFRAME(0);
-+#ifndef __arm__
- 	GETFRAME(1);
- 	GETFRAME(2);
- 	GETFRAME(3);
-@@ -162,6 +163,7 @@
- 	GETFRAME(7);
- 	GETFRAME(8);
- 	GETFRAME(9);
-+#endif
- 
- #undef GETFRAME
- #endif
---- linux-2.6.11/.pc/reiser4/fs/reiser4/dformat.h	2005-03-27 21:24:00.564261304 -0800
-+++ linux-2.6.11/fs/reiser4/dformat.h	2005-03-27 23:29:03.223683704 -0800
-@@ -28,43 +28,84 @@
- 
- /* code on-disk data-types as structs with a single field
-    to rely on compiler type-checking. Like include/asm-i386/page.h */
-+/* This code did not work on the arm with gcc 3.4.3 because the
-+ * arm has a minimum structure size of 4 - packed is necessary to
-+ * allow these types to be smaller than 4 - and because this version
-+ * of gcc 'loses' the alignment if the structure contains just one
-+ * element of alignment 8 (or probably any value greater than 4).
-+ * To fix this and to make the code much more portable all the basic
-+ * types are now just done as arrays of bytes - __u8.
-+ *
-+ * This is highly tricky, however the check code in debug.c should
-+ * fire a compile time assert if it goes wrong.
-+ */
-+#if __arm__
-+#define PACKED8  __attribute__ ((packed,aligned(1)))
-+/* Warning: the presence of the packed attribute here means that any
-+ * d16 in a structure so marked will lose its alignment.  That doesn't
-+ * seem to matter because there don't seem to be any d16's with odd
-+ * structure offsets, but it might.
-+ */
-+#define PACKED16 __attribute__ ((packed,aligned(2)))
-+#define PACKED32 __attribute__ ((aligned(4)))
-+#define PACKED64 __attribute__ ((aligned(8)))
-+#else
-+#define PACKED8  __attribute__ ((aligned(1)))
-+#define PACKED16 __attribute__ ((aligned(2)))
-+#define PACKED32 __attribute__ ((aligned(4)))
-+#define PACKED64 __attribute__ ((aligned(8)))
-+#endif
- typedef struct d8 {
--	__u8 datum;
--} d8 __attribute__ ((aligned(1)));
-+	__u8 datum[1];
-+} PACKED8 d8;
- typedef struct d16 {
--	__u16 datum;
--} d16 __attribute__ ((aligned(2)));
-+	__u8 datum[2];
-+} PACKED16 d16;
- typedef struct d32 {
--	__u32 datum;
--} d32 __attribute__ ((aligned(4)));
-+	__u8 datum[4];
-+} PACKED32 d32;
- typedef struct d64 {
--	__u64 datum;
--} d64 __attribute__ ((aligned(8)));
-+	__u8 datum[8];
-+} PACKED64 d64;
- 
-+#define PACKEDt(t) __attribute__ ((packed,aligned(__alignof__ (t)) ))
-+#define PACKEDt2(t1,t2) __attribute__ ((packed,aligned(\
-+		__alignof__ (t1) < __alignof__ (t2) ? __alignof__ (t2) : __alignof__ (t1) )))
- #define PACKED __attribute__((packed))
- 
- static inline __u8
- d8tocpu(const d8 * ondisk /* on-disk value to convert */ )
- {
--	return ondisk->datum;
-+	return ondisk->datum[0];
- }
- 
- static inline __u16
- d16tocpu(const d16 * ondisk /* on-disk value to convert */ )
- {
--	return __le16_to_cpu(get_unaligned(&ondisk->datum));
-+	return ondisk->datum[0] + (ondisk->datum[1] << 8);
- }
- 
- static inline __u32
- d32tocpu(const d32 * ondisk /* on-disk value to convert */ )
- {
--	return __le32_to_cpu(get_unaligned(&ondisk->datum));
-+	return ondisk->datum[0] +
-+		(ondisk->datum[1] << 8) +
-+		(ondisk->datum[2] << 16) +
-+		(ondisk->datum[3] << 24);
- }
- 
- static inline __u64
- d64tocpu(const d64 * ondisk /* on-disk value to convert */ )
- {
--	return __le64_to_cpu(get_unaligned(&ondisk->datum));
-+	__u32 low = ondisk->datum[0] +
-+		(ondisk->datum[1] << 8) +
-+		(ondisk->datum[2] << 16) +
-+		(ondisk->datum[3] << 24);
-+	__u64 high = ondisk->datum[4] +
-+		(ondisk->datum[5] << 8) +
-+		(ondisk->datum[6] << 16) +
-+		(ondisk->datum[7] << 24);
-+	return low + (high << 32);
- }
- 
- static inline d8 *
-@@ -72,7 +113,7 @@
- 	d8 * ondisk /* result */ )
- {
- 	assert("nikita-1264", oncpu < 0x100);
--	put_unaligned(oncpu, &ondisk->datum);
-+	ondisk->datum[0] = oncpu;
- 	return ondisk;
- }
- 
-@@ -81,7 +122,8 @@
- 	 d16 * ondisk /* result */ )
- {
- 	assert("nikita-1265", oncpu < 0x10000);
--	put_unaligned(__cpu_to_le16(oncpu), &ondisk->datum);
-+	ondisk->datum[0] = oncpu;
-+	ondisk->datum[1] = oncpu >> 8;
- 	return ondisk;
- }
- 
-@@ -89,15 +131,27 @@
- cputod32(__u32 oncpu /* CPU value to convert */ ,
- 	 d32 * ondisk /* result */ )
- {
--	put_unaligned(__cpu_to_le32(oncpu), &ondisk->datum);
-+	ondisk->datum[0] = oncpu; oncpu >>= 8;
-+	ondisk->datum[1] = oncpu; oncpu >>= 8;
-+	ondisk->datum[2] = oncpu; oncpu >>= 8;
-+	ondisk->datum[3] = oncpu;
- 	return ondisk;
- }
- 
- static inline d64 *
--cputod64(__u64 oncpu /* CPU value to convert */ ,
-+cputod64(__u64 oncpuIn /* CPU value to convert */ ,
- 	 d64 * ondisk /* result */ )
- {
--	put_unaligned(__cpu_to_le64(oncpu), &ondisk->datum);
-+	__u32 oncpu = oncpuIn;
-+	ondisk->datum[0] = oncpu; oncpu >>= 8;
-+	ondisk->datum[1] = oncpu; oncpu >>= 8;
-+	ondisk->datum[2] = oncpu; oncpu >>= 8;
-+	ondisk->datum[3] = oncpu;
-+	oncpu = oncpuIn >> 32;
-+	ondisk->datum[4] = oncpu; oncpu >>= 8;
-+	ondisk->datum[5] = oncpu; oncpu >>= 8;
-+	ondisk->datum[6] = oncpu; oncpu >>= 8;
-+	ondisk->datum[7] = oncpu;
- 	return ondisk;
- }
- 
-@@ -111,7 +165,7 @@
- /* data-type for block number on disk, disk format */
- union reiser4_dblock_nr {
- 	d64 blk;
--};
-+} PACKED64;
- 
- static inline reiser4_block_nr
- dblock_to_cpu(const reiser4_dblock_nr * dblock)
-@@ -148,7 +202,7 @@
- 	char uuid[16];		/* unique id */
- 	char label[16];		/* filesystem label */
- 	d64 diskmap;		/* location of the diskmap. 0 if not present */
--} reiser4_master_sb;
-+} PACKED64 reiser4_master_sb;
- 
- /* __FS_REISER4_DFORMAT_H__ */
- #endif
---- linux-2.6.11/.pc/reiser4/fs/reiser4/kassign.h	2005-03-27 21:24:00.588257656 -0800
-+++ linux-2.6.11/fs/reiser4/kassign.h	2005-03-27 21:24:02.757927816 -0800
-@@ -46,7 +46,7 @@
- 	d8 locality[sizeof (__u64)];
- 	ON_LARGE_KEY(d8 ordering[sizeof (__u64)];)
- 	d8 objectid[sizeof (__u64)];
--} obj_key_id;
-+} PACKED8 obj_key_id;
- 
- /* Information sufficient to uniquely identify directory entry within
-    compressed directory item.
-@@ -57,7 +57,7 @@
- 	ON_LARGE_KEY(d8 ordering[sizeof (__u64)];)
- 	d8 objectid[sizeof (__u64)];
- 	d8 offset[sizeof (__u64)];
--} de_id;
-+} PACKED8 de_id;
- 
- extern int inode_onwire_size(const struct inode *obj);
- extern char *build_inode_onwire(const struct inode *obj, char *area);
---- linux-2.6.11/.pc/reiser4/fs/reiser4/key.h	2005-03-27 21:24:00.591257200 -0800
-+++ linux-2.6.11/fs/reiser4/key.h	2005-03-27 23:41:07.744539792 -0800
-@@ -106,7 +106,7 @@
- union reiser4_key {
- 	d64 el[KEY_LAST_INDEX];
- 	int pad;
--};
-+} PACKED64;
- 
- /* bitmasks showing where within reiser4_key particular key is
-     stored. */
-@@ -138,6 +138,20 @@
- 	KEY_ORDERING_SHIFT = 0,
- } reiser4_key_field_shift;
- 
-+/* initialise a key, this is a compile time constant initialiser expressed as
-+ * three or four (as appropriate) 8 byte initialisers, there are braces around
-+ * each 8 byte quantity but not around the whole initializer.
-+ */
-+#define KEY_INIT(type,loc,order,band,oid,off)\
-+{{ (0xf&(type))+(0xf0&((loc) << 4)), 0xff&((loc) >> 4), 0xff&((loc) >> 12), 0xff&((loc) >> 20),\
-+	0xff&((loc) >> 28), 0xff&((loc) >> 36), 0xff&((loc) >> 44), 0xff&((loc) >> 52) }},\
-+ON_LARGE_KEY({{ 0xff&(order), 0xff&((order)>>8), 0xff&((order)>>16), 0xff&((order)>>24),\
-+	0xff&((order)>>32), 0xff&((order)>>40), 0xff&((order)>>48), 0xff&((order)>>56) }},)\
-+{{ 0xff&(oid), 0xff&((oid)>>8), 0xff&((oid)>>16), 0xff&((oid)>>24),\
-+	0xff&((oid)>>32), 0xff&((oid)>>40), 0xff&((oid)>>48), (0xf&((oid)>>56))+(0xf0&((band)<<4))}},\
-+{{ 0xff&(off), 0xff&((off)>>8), 0xff&((off)>>16), 0xff&((off)>>24),\
-+	0xff&((off)>>32), 0xff&((off)>>40), 0xff&((off)>>48), 0xff&((off)>>56) }}
-+
- static inline __u64
- get_key_el(const reiser4_key * key, reiser4_key_field_index off)
- {
---- linux-2.6.11/.pc/reiser4/fs/reiser4/status_flags.h	2005-03-27 21:24:00.682243368 -0800
-+++ linux-2.6.11/fs/reiser4/status_flags.h	2005-03-27 21:24:02.758927664 -0800
-@@ -33,7 +33,7 @@
- 				last sector where io error happened if status is "io error encountered" */
- 	d64 stacktrace[10];  /* Last ten functional calls made (addresses)*/
- 	char texterror[REISER4_TEXTERROR_LEN]; /* Any error message if appropriate, otherwise filled with zeroes */
--};
-+} PACKED64;
- 
- int reiser4_status_init(reiser4_block_nr block);
- int reiser4_status_query(u64 *status, u64 *extended);
---- linux-2.6.11/.pc/reiser4/fs/reiser4/wander.h	2005-03-27 21:24:00.709239264 -0800
-+++ linux-2.6.11/fs/reiser4/wander.h	2005-03-27 22:14:59.663207576 -0800
-@@ -19,7 +19,7 @@
- struct journal_header {
- 	/* last written transaction head location */
- 	d64 last_committed_tx;
--};
-+} PACKED64;
- 
- typedef struct journal_location {
- 	reiser4_block_nr footer;
-@@ -46,7 +46,7 @@
- 	   super block */
- 	d64 nr_files;
- 	d64 next_oid;
--};
-+} PACKED64;
- 
- /* Each wander record (except the first one) has unified format with wander
-    record header followed by an array of log entries */
-@@ -66,7 +66,7 @@
- 
- 	/* number of previous block in commit */
- 	d64 next_block;
--};
-+} PACKED64;
- 
- /* The first wander record (transaction head) of written transaction has the
-    special format */
-@@ -98,7 +98,7 @@
- 	   separately from super block */
- 	d64 nr_files;
- 	d64 next_oid;
--};
-+} PACKED64;
- 
- /* A transaction gets written to disk as a set of wander records (each wander
-    record size is fs block) */
-@@ -108,7 +108,7 @@
- struct wander_entry {
- 	d64 original;		/* block original location */
- 	d64 wandered;		/* block wandered location */
--};
-+} PACKED64;
- 
- /* REISER4 JOURNAL WRITER FUNCTIONS   */
- 
diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6.11-mm/x1205-rtc.c-mm.patch b/packages/obsolete/nslu2/nslu2-kernel/2.6.11-mm/x1205-rtc.c-mm.patch
deleted file mode 100644
index 6ef6befd73..0000000000
--- a/packages/obsolete/nslu2/nslu2-kernel/2.6.11-mm/x1205-rtc.c-mm.patch
+++ /dev/null
@@ -1,18 +0,0 @@
---- original/drivers/i2c/chips/x1205-rtc.c	Sat Mar  5 23:41:12 2005
-+++ linux-2.6.11/drivers/i2c/chips/x1205-rtc.c	Sat Mar  5 23:41:25 2005
-@@ -139,7 +139,6 @@
- };
- 
- static struct i2c_client x1205_i2c_client = {
--	.id		=	I2C_DRIVERID_X1205,
- 	.flags		=	0,
- 	.addr		=	X1205_I2C_BUS_ADDR,	// chip address - NOTE: 7bit
- 	.adapter	=	NULL,			// the adapter we sit on assigned in attach
-@@ -301,7 +300,6 @@
- 	int errno;
- 		
- 	x1205_i2c_client.adapter = adapter;
--	x1205_i2c_client.id++;
- 
- 	if ((x1205_get_datetime(&x1205_i2c_client, &tm, X1205_CCR_BASE)) != NOERR)	//test for functional driver 
- 		return -EIO;
diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6.12/.mtn2git_empty b/packages/obsolete/nslu2/nslu2-kernel/2.6.12/.mtn2git_empty
deleted file mode 100644
index e69de29bb2..0000000000
--- a/packages/obsolete/nslu2/nslu2-kernel/2.6.12/.mtn2git_empty
+++ /dev/null
diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6.12/defconfig b/packages/obsolete/nslu2/nslu2-kernel/2.6.12/defconfig
deleted file mode 100644
index 9397245b99..0000000000
--- a/packages/obsolete/nslu2/nslu2-kernel/2.6.12/defconfig
+++ /dev/null
@@ -1,1226 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12
-# Sat Jun 18 17:17:09 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-# CONFIG_KALLSYMS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-# CONFIG_BASE_FULL is not set
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=1
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_CAMELOT is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-CONFIG_ARCH_IXP4XX=y
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
-
-#
-# Intel IXP4xx Implementation Options
-#
-
-#
-# IXP4xx Platforms
-#
-# CONFIG_ARCH_AVILA is not set
-# CONFIG_ARCH_ADI_COYOTE is not set
-# CONFIG_ARCH_IXDP425 is not set
-# CONFIG_MACH_IXDPG425 is not set
-# CONFIG_MACH_IXDP465 is not set
-CONFIG_ARCH_NSLU2=y
-# CONFIG_ARCH_PRPMC1100 is not set
-# CONFIG_MACH_GTWX5715 is not set
-
-#
-# IXP4xx Options
-#
-CONFIG_IXP4XX_INDIRECT_PCI=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_ARM_THUMB_INTERWORK is not set
-# CONFIG_ARCH_XSCALE is not set
-CONFIG_CPU_BIG_ENDIAN=y
-CONFIG_XSCALE_PMU=y
-CONFIG_DMABOUNCE=y
-
-#
-# Bus support
-#
-CONFIG_ISA_DMA_API=y
-CONFIG_PCI=y
-# CONFIG_PCI_LEGACY_PROC is not set
-# CONFIG_PCI_NAMES is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_DISCONTIGMEM is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/mtdblock4 rw rootfstype=jffs2 mem=32M@0x00000000 init=/linuxrc console=ttyS0,115200n8"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-CONFIG_MTD_IXP4XX=y
-# CONFIG_MTD_EDB7312 is not set
-# CONFIG_MTD_PCI is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=4
-CONFIG_BLK_DEV_RAM_SIZE=10240
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-CONFIG_IOSCHED_DEADLINE=y
-# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=m
-CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-CONFIG_INET_IPCOMP=m
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-CONFIG_VLAN_8021Q=m
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
-CONFIG_IPX=m
-# CONFIG_IPX_INTERN is not set
-CONFIG_ATALK=m
-CONFIG_DEV_APPLETALK=y
-CONFIG_IPDDP=m
-CONFIG_IPDDP_ENCAP=y
-CONFIG_IPDDP_DECAP=y
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-CONFIG_NET_PKTGEN=m
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_RX is not set
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_SCO=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-# CONFIG_BT_HIDP is not set
-
-#
-# Bluetooth device drivers
-#
-CONFIG_BT_HCIUSB=m
-CONFIG_BT_HCIUSB_SCO=y
-# CONFIG_BT_HCIUART is not set
-# CONFIG_BT_HCIBCM203X is not set
-# CONFIG_BT_HCIBPA10X is not set
-# CONFIG_BT_HCIBFUSB is not set
-# CONFIG_BT_HCIVHCI is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-CONFIG_TUN=m
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_SMC91X is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-CONFIG_NET_RADIO=y
-
-#
-# Obsolete Wireless cards support (pre-802.11)
-#
-# CONFIG_STRIP is not set
-
-#
-# Wireless 802.11b ISA/PCI cards support
-#
-# CONFIG_HERMES is not set
-# CONFIG_ATMEL is not set
-
-#
-# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
-#
-# CONFIG_PRISM54 is not set
-CONFIG_NET_WIRELESS=y
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
-CONFIG_NETCONSOLE=m
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-# CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=2
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=16
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_IXP4XX_WATCHDOG=y
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_RTC=m
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_IOP3XX is not set
-# CONFIG_I2C_ISA is not set
-CONFIG_I2C_IXP4XX=y
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_SCx200_ACB is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Hardware Sensors Chip support
-#
-CONFIG_I2C_SENSOR=y
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-
-#
-# Other I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-CONFIG_SENSORS_EEPROM=y
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-CONFIG_SENSORS_X1205=y
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
-
-#
-# USB Bluetooth TTY can only be used with disabled Bluetooth subsystem
-#
-# CONFIG_USB_ACM is not set
-CONFIG_USB_PRINTER=m
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
-CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-
-#
-# USB Input Devices
-#
-# CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB Multimedia devices
-#
-# CONFIG_USB_DABUSB is not set
-
-#
-# Video4Linux support is needed for USB Multimedia device support
-#
-
-#
-# USB Network Adapters
-#
-CONFIG_USB_CATC=m
-CONFIG_USB_KAWETH=m
-CONFIG_USB_PEGASUS=m
-CONFIG_USB_RTL8150=m
-CONFIG_USB_USBNET=m
-
-#
-# USB Host-to-Host Cables
-#
-CONFIG_USB_ALI_M5632=y
-CONFIG_USB_AN2720=y
-CONFIG_USB_BELKIN=y
-CONFIG_USB_GENESYS=y
-CONFIG_USB_NET1080=y
-CONFIG_USB_PL2301=y
-CONFIG_USB_KC2190=y
-
-#
-# Intelligent USB Devices/Gadgets
-#
-CONFIG_USB_ARMLINUX=y
-CONFIG_USB_EPSON2888=y
-CONFIG_USB_ZAURUS=y
-CONFIG_USB_CDCETHER=y
-
-#
-# USB Network Adapters
-#
-CONFIG_USB_AX8817X=y
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_USB_MON is not set
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-CONFIG_USB_SERIAL=m
-CONFIG_USB_SERIAL_GENERIC=y
-# CONFIG_USB_SERIAL_AIRPRIME is not set
-CONFIG_USB_SERIAL_BELKIN=m
-CONFIG_USB_SERIAL_WHITEHEAT=m
-CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
-# CONFIG_USB_SERIAL_CP2101 is not set
-CONFIG_USB_SERIAL_CYPRESS_M8=m
-CONFIG_USB_SERIAL_EMPEG=m
-CONFIG_USB_SERIAL_FTDI_SIO=m
-CONFIG_USB_SERIAL_VISOR=m
-CONFIG_USB_SERIAL_IPAQ=m
-CONFIG_USB_SERIAL_IR=m
-CONFIG_USB_SERIAL_EDGEPORT=m
-CONFIG_USB_SERIAL_EDGEPORT_TI=m
-CONFIG_USB_SERIAL_GARMIN=m
-CONFIG_USB_SERIAL_IPW=m
-CONFIG_USB_SERIAL_KEYSPAN_PDA=m
-# CONFIG_USB_SERIAL_KEYSPAN is not set
-CONFIG_USB_SERIAL_KLSI=m
-CONFIG_USB_SERIAL_KOBIL_SCT=m
-CONFIG_USB_SERIAL_MCT_U232=m
-CONFIG_USB_SERIAL_PL2303=m
-# CONFIG_USB_SERIAL_HP4X is not set
-CONFIG_USB_SERIAL_SAFE=m
-# CONFIG_USB_SERIAL_SAFE_PADDED is not set
-CONFIG_USB_SERIAL_TI=m
-CONFIG_USB_SERIAL_CYBERJACK=m
-CONFIG_USB_SERIAL_XIRCOM=m
-CONFIG_USB_SERIAL_OMNINET=m
-CONFIG_USB_EZUSB=y
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB ATM/DSL drivers
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=m
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT3_FS=m
-CONFIG_EXT3_FS_XATTR=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-CONFIG_JBD=m
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=m
-CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-CONFIG_REISERFS_FS_XATTR=y
-CONFIG_REISERFS_FS_POSIX_ACL=y
-CONFIG_REISERFS_FS_SECURITY=y
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-CONFIG_AUTOFS4_FS=m
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_ZISOFS_FS=m
-CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="utf8"
-CONFIG_NTFS_FS=m
-# CONFIG_NTFS_DEBUG is not set
-CONFIG_NTFS_RW=y
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_NAND is not set
-# CONFIG_JFFS2_FS_NOR_ECC is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_NFS_DIRECTIO=y
-CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
-CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_SUNRPC=m
-CONFIG_SUNRPC_GSS=m
-CONFIG_RPCSEC_GSS_KRB5=m
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-CONFIG_CIFS_XATTR=y
-CONFIG_CIFS_POSIX=y
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="utf8"
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=m
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=m
-CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_DES=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_TEST=m
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=m
-CONFIG_CRC32=y
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6.12/disk_led_blinking.patch b/packages/obsolete/nslu2/nslu2-kernel/2.6.12/disk_led_blinking.patch
deleted file mode 100644
index 7487cf3ee8..0000000000
--- a/packages/obsolete/nslu2/nslu2-kernel/2.6.12/disk_led_blinking.patch
+++ /dev/null
@@ -1,127 +0,0 @@
---- linux-2.6.12.2/drivers/usb/core/hub.c.bak	2005-09-19 20:29:14.000000000 +0000
-+++ linux-2.6.12.2/drivers/usb/core/hub.c	2005-09-19 20:30:44.000000000 +0000
-@@ -1026,6 +1026,19 @@
- 
- 	dev_info (&udev->dev, "USB disconnect, address %d\n", udev->devnum);
- 
-+	// --- Forward-Ported Linksys Disk 1 & Disk 2 LED Control (Port done 16.Sept.05 by Philipp Kirchhofer) ---
-+	// Copy & paste from nslu2-io.c
-+	#define DISK1_OFF	0x00000008	//0b0000 0000 0000 1000
-+	#define	DISK2_OFF	0x00000004	//0b0000 0000 0000 0100
-+	// Copy & Paste end
-+
-+	if (*udev->devpath == 0x31) {
-+		*IXP4XX_GPIO_GPOUTR |= DISK1_OFF;
-+	} else if (*udev->devpath == 0x32) {
-+		*IXP4XX_GPIO_GPOUTR |= DISK2_OFF;
-+	}
-+	// --- End LED Control ---
-+
- 	/* Free up all the children before we remove this device */
- 	for (i = 0; i < USB_MAXCHILDREN; i++) {
- 		if (udev->children[i])
-@@ -2175,6 +2188,19 @@
- 			udev->bus->controller->driver->name,
- 			udev->devnum);
- 
-+	// --- Start LED Control ---
-+	// Copy & paste from nslu2-io.c
-+	#define DISK1_ON	0xfffffff7	//0b1111 1111 1111 0111
-+	#define	DISK2_ON	0xfffffffb	//0b1111 1111 1111 1011
-+	// Copy & Paste end
-+
-+	if (*udev->devpath == 0x31) {
-+		*IXP4XX_GPIO_GPOUTR &= DISK1_ON;
-+	} else if (*udev->devpath == 0x32) {
-+		*IXP4XX_GPIO_GPOUTR &= DISK2_ON;
-+	}
-+	// --- End LED Control ---
-+
- 	/* Set up TT records, if needed  */
- 	if (hdev->tt) {
- 		udev->tt = hdev->tt;
---- linux-2.6.12.2/drivers/usb/storage/transport.c.bak	2005-09-19 20:29:25.000000000 +0000
-+++ linux-2.6.12.2/drivers/usb/storage/transport.c	2005-09-19 20:29:55.000000000 +0000
-@@ -60,6 +60,60 @@
- #include "scsiglue.h"
- #include "debug.h"
- 
-+// --- Forward-Ported Linksys Disk 1 & Disk 2 LED Activity Blinking Part 1 (Port done 16.Sept.05 by Philipp Kirchhofer) ---
-+// Copy & Paste from nslu2-io.c
-+#define DISK1_ON	0xfffffff7	//0b1111 1111 1111 0111
-+#define DISK2_ON	0xfffffffb	//0b1111 1111 1111 1011
-+
-+#define DISK1_OFF	0x00000008	//0b0000 0000 0000 1000
-+#define DISK2_OFF	0x00000004	//0b0000 0000 0000 0100
-+// Copy & Paste End
-+
-+#define JIFFIES_BLINKING_TIME 6
-+#define ON_LED_INTERVAL 3
-+unsigned long turn_on_time;
-+
-+static struct timer_list usb1_led_timer;    /* ide led switch */
-+static struct timer_list usb2_led_timer;    /* ide led switch */
-+
-+// Turns on Disk 1 LED
-+static void turn_on_led_usb1(unsigned long ptr) {
-+	*IXP4XX_GPIO_GPOUTR &= DISK1_ON; // 0xfff7
-+	return;
-+}
-+
-+// Turns on Disk 2 LED
-+static void turn_on_led_usb2(unsigned long ptr) {
-+	*IXP4XX_GPIO_GPOUTR &= DISK2_ON; // 0xfffb
-+        return;
-+}
-+
-+// Turns on Disk 1 LED after ON_LED_INTERVAL jiffies
-+static void usb_1_led_timer(void) {
-+	usb1_led_timer.expires = jiffies + ON_LED_INTERVAL;
-+	add_timer(&usb1_led_timer);
-+	return;
-+}
-+
-+// Turns on Disk 2 LED after ON_LED_INTERVAL jiffies
-+static void usb_2_led_timer(void) {
-+        usb2_led_timer.expires = jiffies + ON_LED_INTERVAL;
-+        add_timer(&usb2_led_timer);
-+        return;
-+}
-+
-+// Initializes Timers
-+unsigned long initialized_timers = 0;
-+static void initializeTimers() {
-+	if (initialized_timers != 1) {
-+		init_timer(&usb1_led_timer);
-+		usb1_led_timer.function = turn_on_led_usb1;
-+		init_timer(&usb2_led_timer);
-+		usb2_led_timer.function = turn_on_led_usb2;
-+		initialized_timers = 1;
-+	}
-+}
-+// --- End Disk LED Activity Blinking Part 1 ---
- 
- /***********************************************************************
-  * Data transfer routines
-@@ -499,6 +553,21 @@
- 
- 	/* are we scatter-gathering? */
- 	if (use_sg) {
-+		// --- Disk LED Activity Blinking Part 2 ---
-+		initializeTimers();
-+		if ((jiffies - turn_on_time) >= JIFFIES_BLINKING_TIME) {
-+	        	if (*us->pusb_dev->devpath == 0x31) {
-+				del_timer_sync(&usb1_led_timer);
-+				*IXP4XX_GPIO_GPOUTR |= DISK1_OFF;
-+				usb_1_led_timer();
-+			} else if (*us->pusb_dev->devpath == 0x32) {
-+				del_timer_sync(&usb2_led_timer);
-+				*IXP4XX_GPIO_GPOUTR |= DISK2_OFF;
-+				usb_2_led_timer();
-+			}
-+			turn_on_time = jiffies;
-+		}
-+		// --- End Disk LED Activity Blinking Part 2 ---
- 		/* use the usb core scatter-gather primitives */
- 		result = usb_stor_bulk_transfer_sglist(us, pipe,
- 				(struct scatterlist *) buf, use_sg,
diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6.12/missing-exports.patch b/packages/obsolete/nslu2/nslu2-kernel/2.6.12/missing-exports.patch
deleted file mode 100644
index 935dd29115..0000000000
--- a/packages/obsolete/nslu2/nslu2-kernel/2.6.12/missing-exports.patch
+++ /dev/null
@@ -1,19 +0,0 @@
---- linux-2.6.12/drivers/char/random.c~	2005-05-14 16:42:24.000000000 -0400
-+++ linux-2.6.12/drivers/char/random.c	2005-05-14 16:42:46.000000000 -0400
-@@ -646,6 +646,7 @@ extern void add_input_randomness(unsigne
- 	add_timer_randomness(&input_timer_state,
- 			     (type << 4) ^ code ^ (code >> 4) ^ value);
- }
-+EXPORT_SYMBOL_GPL(add_input_randomness);
- 
- void add_interrupt_randomness(int irq)
- {
---- linux-2.6.12/lib/kobject_uevent.c~	2005-05-14 16:45:13.000000000 -0400
-+++ linux-2.6.12/lib/kobject_uevent.c	2005-05-14 16:45:27.000000000 -0400
-@@ -178,6 +178,7 @@ static inline int send_uevent(const char
- 
- #ifdef CONFIG_HOTPLUG
- char hotplug_path[HOTPLUG_PATH_LEN] = "/sbin/hotplug";
-+EXPORT_SYMBOL_GPL(hotplug_path);
- u64 hotplug_seqnum;
- static DEFINE_SPINLOCK(sequence_lock);
diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6.12/nslu2-arch.patch b/packages/obsolete/nslu2/nslu2-kernel/2.6.12/nslu2-arch.patch
deleted file mode 100644
index 6a41f02355..0000000000
--- a/packages/obsolete/nslu2/nslu2-kernel/2.6.12/nslu2-arch.patch
+++ /dev/null
@@ -1,92 +0,0 @@
---- linux-2.6.11/arch/arm/boot/compressed/head.S	2005-06-17 17:51:27.245788998 -0700
-+++ linux-2.6.11/arch/arm/boot/compressed/head.S	2005-06-17 17:54:45.041806429 -0700
-@@ -37,6 +37,7 @@
-     defined(CONFIG_ARCH_INTEGRATOR) || \
-     defined(CONFIG_ARCH_PXA) || \
-     defined(CONFIG_ARCH_IXP4XX) || \
-+    defined(CONFIG_ARCH_NSLU2) || \
-     defined(CONFIG_ARCH_IXP2000) || \
-     defined(CONFIG_ARCH_LH7A40X) || \
-     defined(CONFIG_ARCH_OMAP)
---- linux-2.6.11/.pc/2.6.patch/arch/arm/boot/compressed/head-xscale.S	2005-03-01 23:37:52.000000000 -0800
-+++ linux-2.6.11/arch/arm/boot/compressed/head-xscale.S	2005-06-17 17:51:32.546985425 -0700
-@@ -47,3 +47,8 @@
-                orr     r7, r7, #(MACH_TYPE_GTWX5715 & 0xff00)
- #endif
- 
-+#ifdef CONFIG_ARCH_NSLU2
-+               mov     r7, #(MACH_TYPE_NSLU2 & 0xff)
-+               orr     r7, r7, #(MACH_TYPE_NSLU2 & 0xff00)
-+#endif
-+
---- linux-2.6.11/.pc/2.6.patch/arch/arm/mach-ixp4xx/Kconfig	2005-06-17 17:51:27.365770810 -0700
-+++ linux-2.6.11/arch/arm/mach-ixp4xx/Kconfig	2005-06-17 17:51:32.560983303 -0700
-@@ -43,6 +43,12 @@
- 	  IXDP465 Development Platform (Also known as BMP).
- 	  For more information on this platform, see <file:Documentation/arm/IXP4xx>.
- 
-+config ARCH_NSLU2
-+       bool "NSLU2"
-+       help
-+         Say 'Y' here if you want your kernel to support Linksys's 
-+         NSLU2 NAS device. For more information on this platform, 
-+         see http://www.nslu2-linux.org
- 
- #
- # IXCDP1100 is the exact same HW as IXDP425, but with a different machine 
---- linux-2.6.11/.pc/2.6.patch/arch/arm/mach-ixp4xx/Makefile	2005-06-17 17:51:27.365770810 -0700
-+++ linux-2.6.11/arch/arm/mach-ixp4xx/Makefile	2005-06-17 17:51:32.560983303 -0700
-@@ -8,4 +8,4 @@
- obj-$(CONFIG_MACH_IXDPG425)	+= ixdpg425-pci.o coyote-setup.o
- obj-$(CONFIG_ARCH_ADI_COYOTE)	+= coyote-pci.o coyote-setup.o
- obj-$(CONFIG_MACH_GTWX5715)	+= gtwx5715-pci.o gtwx5715-setup.o
--
-+obj-$(CONFIG_ARCH_NSLU2)	+= nslu2-pci.o nslu2-setup.o nslu2-part.o nslu2-io.o
---- linux-2.6.11/.pc/2.6.patch/arch/arm/tools/mach-types	2005-06-17 17:51:27.423762020 -0700
-+++ linux-2.6.11/arch/arm/tools/mach-types	2005-06-17 17:51:32.564982697 -0700
-@@ -604,7 +604,7 @@
- roverp7			MACH_ROVERP7		ROVERP7			594
- pr818s			MACH_PR818S		PR818S			595
- trxpro			MACH_TRXPRO		TRXPRO			596
--nslu2			MACH_NSLU2		NSLU2			597
-+nslu2			ARCH_NSLU2		NSLU2			597
- e400			MACH_E400		E400			598
- trab			MACH_TRAB		TRAB			599
- cmc_pu2			MACH_CMC_PU2		CMC_PU2			600
---- linux-2.6.11/.pc/2.6.patch/drivers/mtd/maps/ixp4xx.c	2005-03-01 23:37:30.000000000 -0800
-+++ linux-2.6.11/drivers/mtd/maps/ixp4xx.c	2005-06-17 17:51:32.566982394 -0700
-@@ -94,7 +94,11 @@
- 	struct resource *res;
- };
- 
-+#ifdef CONFIG_ARCH_NSLU2
-+static const char *probes[] = { "cmdlinepart", "RedBoot", "NSLU2", NULL };
-+#else
- static const char *probes[] = { "RedBoot", "cmdlinepart", NULL };
-+#endif
- 
- static int ixp4xx_flash_remove(struct device *_dev)
- {
---- linux-2.6.11/.pc/2.6.patch/include/asm-arm/arch-ixp4xx/hardware.h	2005-03-01 23:37:51.000000000 -0800
-+++ linux-2.6.11/include/asm-arm/arch-ixp4xx/hardware.h	2005-06-17 17:51:32.567982242 -0700
-@@ -44,5 +44,6 @@
- #include "ixdp425.h"
- #include "coyote.h"
- #include "prpmc1100.h"
-+#include "nslu2.h"
- 
- #endif  /* _ASM_ARCH_HARDWARE_H */
---- linux-2.6.11/.pc/2.6.patch/include/asm-arm/arch-ixp4xx/irqs.h	2005-03-01 23:38:12.000000000 -0800
-+++ linux-2.6.11/include/asm-arm/arch-ixp4xx/irqs.h	2005-06-17 17:51:32.568982091 -0700
-@@ -93,4 +93,11 @@
- #define	IRQ_COYOTE_PCI_SLOT1	IRQ_IXP4XX_GPIO11
- #define	IRQ_COYOTE_IDE		IRQ_IXP4XX_GPIO5
- 
-+/*
-+ * NSLU2 board IRQs
-+ */
-+#define        IRQ_NSLU2_PCI_INTA      IRQ_IXP4XX_GPIO11
-+#define        IRQ_NSLU2_PCI_INTB      IRQ_IXP4XX_GPIO10
-+#define        IRQ_NSLU2_PCI_INTC      IRQ_IXP4XX_GPIO9
-+
- #endif
diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6.12/nslu2-setup.c b/packages/obsolete/nslu2/nslu2-kernel/2.6.12/nslu2-setup.c
deleted file mode 100644
index fcb8566784..0000000000
--- a/packages/obsolete/nslu2/nslu2-kernel/2.6.12/nslu2-setup.c
+++ /dev/null
@@ -1,146 +0,0 @@
-/*
- * arch/arm/mach-ixp4xx/nslu2-setup.c
- *
- * NSLU2 board-setup
- *
- * based ixdp425-setup.c:
- *      Copyright (C) 2003-2004 MontaVista Software, Inc.
- *
- * Author: Mark Rakes <mrakes at mac.com>
- * Maintainers: http://www.nslu2-linux.org/
- *
- * Fixed missing init_time in MACHINE_START kas11 10/22/04
- * Changed to conform to new style __init ixdp425 kas11 10/22/04 
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/serial.h>
-#include <linux/tty.h>
-#include <linux/serial_8250.h>
-
-#include <asm/types.h>
-#include <asm/setup.h>
-#include <asm/memory.h>
-#include <asm/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
-
-void __init nslu2_map_io(void) 
-{
-	ixp4xx_map_io();
-}
-
-static struct flash_platform_data nslu2_flash_data = {
-	.map_name	= "cfi_probe",
-	.width		= 2,
-};
-
-static struct resource nslu2_flash_resource = {
-	.start		= NSLU2_FLASH_BASE,
-	.end		= NSLU2_FLASH_BASE + NSLU2_FLASH_SIZE,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device nslu2_flash = {
-	.name		= "IXP4XX-Flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data = &nslu2_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &nslu2_flash_resource,
-};
-
-static struct ixp4xx_i2c_pins nslu2_i2c_gpio_pins = {
-	.sda_pin	= NSLU2_SDA_PIN,
-	.scl_pin	= NSLU2_SCL_PIN,
-};
-
-static struct platform_device nslu2_i2c_controller = {
-	.name		= "IXP4XX-I2C",
-	.id		= 0,
-	.dev		= {
-		.platform_data = &nslu2_i2c_gpio_pins,
-	},
-	.num_resources	= 0
-};
-
-static struct resource nslu2_uart_resources[] = {
-	{
-		.start		= IXP4XX_UART1_BASE_PHYS,
-		.end		= IXP4XX_UART1_BASE_PHYS + 0x0fff,
-		.flags		= IORESOURCE_MEM
-	},
-	{
-		.start		= IXP4XX_UART2_BASE_PHYS,
-		.end		= IXP4XX_UART2_BASE_PHYS + 0x0fff,
-		.flags		= IORESOURCE_MEM
-	}
-};
-
-static struct plat_serial8250_port nslu2_uart_data[] = {
-	{
-		.mapbase	= IXP4XX_UART1_BASE_PHYS,
-		.membase	= (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
-		.irq		= IRQ_IXP4XX_UART1,
-		.flags		= UPF_BOOT_AUTOCONF,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-		.uartclk	= IXP4XX_UART_XTAL,
-	},
-	{
-		.mapbase	= IXP4XX_UART2_BASE_PHYS,
-		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-		.irq		= IRQ_IXP4XX_UART2,
-		.flags		= UPF_BOOT_AUTOCONF,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-		.uartclk	= IXP4XX_UART_XTAL,
-	}
-};
-
-static struct platform_device nslu2_uart = {
-	.name			= "serial8250",
-	.id			= 0,
-	.dev.platform_data	= nslu2_uart_data,
-	.num_resources		= 2,
-	.resource		= nslu2_uart_resources
-};
-
-static struct platform_device *nslu2_devices[] __initdata = {
-	&nslu2_i2c_controller,
-	&nslu2_flash,
-	&nslu2_uart
-};
-
-static void n2_power_off(void)
-{
-        /* This causes the box to drop the power and go dead. */
-#define GPIO_PO_BM              0x0100  //b0000 0001 0000 0000
-        *IXP4XX_GPIO_GPOER &= ~GPIO_PO_BM;      // enable the pwr cntl gpio
-        *IXP4XX_GPIO_GPOUTR |= GPIO_PO_BM;      // do the deed
-}
-
-static void __init nslu2_init(void)
-{
-	ixp4xx_sys_init();
-
-	pm_power_off = n2_power_off;
-	platform_add_devices(nslu2_devices, ARRAY_SIZE(nslu2_devices));
-}
-
-MACHINE_START(NSLU2, "Linksys NSLU2")
-	        BOOT_MEM(PHYS_OFFSET, IXP4XX_PERIPHERAL_BASE_PHYS, 
-			IXP4XX_PERIPHERAL_BASE_VIRT)
-	        MAPIO(nslu2_map_io)
-	        INITIRQ(ixp4xx_init_irq)        //FIXME: all irq are off here
-	        .timer          = &ixp4xx_timer,
-	        // INITTIME(ixp4xx_init_time)   //this was missing in 2.6.7 code ...soft reboot needed?
-		BOOT_PARAMS(0x0100)
-		INIT_MACHINE(nslu2_init)
-MACHINE_END
-
diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6.12/x1205-rtc.c-id.patch b/packages/obsolete/nslu2/nslu2-kernel/2.6.12/x1205-rtc.c-id.patch
deleted file mode 100644
index 6ef6befd73..0000000000
--- a/packages/obsolete/nslu2/nslu2-kernel/2.6.12/x1205-rtc.c-id.patch
+++ /dev/null
@@ -1,18 +0,0 @@
---- original/drivers/i2c/chips/x1205-rtc.c	Sat Mar  5 23:41:12 2005
-+++ linux-2.6.11/drivers/i2c/chips/x1205-rtc.c	Sat Mar  5 23:41:25 2005
-@@ -139,7 +139,6 @@
- };
- 
- static struct i2c_client x1205_i2c_client = {
--	.id		=	I2C_DRIVERID_X1205,
- 	.flags		=	0,
- 	.addr		=	X1205_I2C_BUS_ADDR,	// chip address - NOTE: 7bit
- 	.adapter	=	NULL,			// the adapter we sit on assigned in attach
-@@ -301,7 +300,6 @@
- 	int errno;
- 		
- 	x1205_i2c_client.adapter = adapter;
--	x1205_i2c_client.id++;
- 
- 	if ((x1205_get_datetime(&x1205_i2c_client, &tm, X1205_CCR_BASE)) != NOERR)	//test for functional driver 
- 		return -EIO;
diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6.14-mm/.mtn2git_empty b/packages/obsolete/nslu2/nslu2-kernel/2.6.14-mm/.mtn2git_empty
deleted file mode 100644
index e69de29bb2..0000000000
--- a/packages/obsolete/nslu2/nslu2-kernel/2.6.14-mm/.mtn2git_empty
+++ /dev/null
diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6.14-mm/00-memory-h-page-shift.patch b/packages/obsolete/nslu2/nslu2-kernel/2.6.14-mm/00-memory-h-page-shift.patch
deleted file mode 100644
index 999b69e851..0000000000
--- a/packages/obsolete/nslu2/nslu2-kernel/2.6.14-mm/00-memory-h-page-shift.patch
+++ /dev/null
@@ -1,10 +0,0 @@
---- linux-2.6.14/include/asm-arm/arch-ixp4xx/memory.h.orig	2005-11-07 23:16:48.456117450 -0800
-+++ linux-2.6.14/include/asm-arm/arch-ixp4xx/memory.h	2005-11-07 23:16:58.160728123 -0800
-@@ -8,6 +8,7 @@
- #define __ASM_ARCH_MEMORY_H
- 
- #include <asm/sizes.h>
-+#include <asm/page.h>
- 
- /*
-  * Physical DRAM offset.
diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6.14-mm/30-i2c-x1205-mm1.patch b/packages/obsolete/nslu2/nslu2-kernel/2.6.14-mm/30-i2c-x1205-mm1.patch
deleted file mode 100644
index 67cbd4cdf4..0000000000
--- a/packages/obsolete/nslu2/nslu2-kernel/2.6.14-mm/30-i2c-x1205-mm1.patch
+++ /dev/null
@@ -1,1036 +0,0 @@
---- linux-2.6.14/drivers/i2c/chips/Kconfig.orig	2005-11-07 22:30:30.413306237 -0800
-+++ linux-2.6.14/drivers/i2c/chips/Kconfig	2005-11-07 22:41:15.785916976 -0800
-@@ -126,13 +126,13 @@ config SENSORS_MAX6875
- 	  This driver can also be built as a module.  If so, the module
- 	  will be called max6875.
- 
--config RTC_X1205_I2C
--	tristate "Xicor X1205 RTC chip"
--	depends on I2C && EXPERIMENTAL
--	help
--	  If you say yes here you get support for the Xicor X1205 RTC chip.
-+config SENSORS_X1205
-+       tristate "Xicor X1205 RTC chip"
-+       depends on I2C
-+       help
-+         If you say yes here you get support for the Xicor X1205 RTC chip.
- 
--	  This driver can also be built as a module. If so, the module
--	  will be called x1205.
-+         This driver can also be built as a module.  If so, the module
-+         will be called x1205
- 
- endmenu
---- linux-2.6.14/drivers/i2c/chips/Makefile.orig	2005-11-07 22:30:30.417306489 -0800
-+++ linux-2.6.14/drivers/i2c/chips/Makefile	2005-11-07 22:41:59.616675071 -0800
-@@ -13,7 +13,7 @@ obj-$(CONFIG_SENSORS_PCF8591)	+= pcf8591
- obj-$(CONFIG_SENSORS_RTC8564)	+= rtc8564.o
- obj-$(CONFIG_ISP1301_OMAP)	+= isp1301_omap.o
- obj-$(CONFIG_TPS65010)		+= tps65010.o
--obj-$(CONFIG_RTC_X1205_I2C)	+= x1205.o
-+obj-$(CONFIG_SENSORS_X1205)     += x1205.o
- 
- ifeq ($(CONFIG_I2C_DEBUG_CHIP),y)
- EXTRA_CFLAGS += -DDEBUG
---- linux-2.6.14/drivers/i2c/chips/x1205.c.orig	2005-11-07 22:30:30.421306741 -0800
-+++ linux-2.6.14/drivers/i2c/chips/x1205.c	2005-11-07 22:42:54.960157617 -0800
-@@ -1,14 +1,16 @@
- /*
-- *  x1205.c - An i2c driver for the Xicor X1205 RTC
-+ *  linux/drivers/i2c/chips/x1205.c
-+ *
-+ *  x1205.c - An 12c driver for the Xicor X1205 RTC
-  *  Copyright 2004 Karen Spearel
-  *  Copyright 2005 Alessandro Zummo
-  *
-  *  please send all reports to:
-  *	kas11 at tampabay dot rr dot com
-  *      a dot zummo at towertech dot it
-- *
-+ *     
-  *  based on the other drivers in this same directory.
-- *
-+ *   
-  *  This program is free software; you can redistribute it and/or modify
-  *  it under the terms of the GNU General Public License as published by
-  *  the Free Software Foundation; either version 2 of the License, or
-@@ -26,83 +28,36 @@
- 
- #include <linux/x1205.h>
- 
--#define DRV_VERSION "0.9.9"
-+#define	EPOCH_1900	1900
-+#define	EPOCH_1970	1970
-+
-+#define DRIVER_VERSION	"0.9.6"
-+#define DRIVER_NAME	(x1205_driver.name)
- 
--/* Addresses to scan: none. This chip is located at
-- * 0x6f and uses a two bytes register addressing.
-- * Two bytes need to be written to read a single register,
-- * while most other chips just require one and take the second
-- * one as the data to be written. To prevent corrupting
-- * unknown chips, the user must explicitely set the probe parameter.
-- */
- 
--static unsigned short normal_i2c[] = { I2C_CLIENT_END };
-+/* Addresses to scan */
-+static unsigned short normal_i2c[] = { X1205_I2C_BUS_ADDR, I2C_CLIENT_END };
- 
- /* Insmod parameters */
- I2C_CLIENT_INSMOD;
- I2C_CLIENT_MODULE_PARM(hctosys,
- 	"Set the system time from the hardware clock upon initialization");
- 
--/* offsets into CCR area */
--
--#define CCR_SEC			0
--#define CCR_MIN			1
--#define CCR_HOUR		2
--#define CCR_MDAY		3
--#define CCR_MONTH		4
--#define CCR_YEAR		5
--#define CCR_WDAY		6
--#define CCR_Y2K			7
--
--#define X1205_REG_SR		0x3F	/* status register */
--#define X1205_REG_Y2K		0x37
--#define X1205_REG_DW		0x36
--#define X1205_REG_YR		0x35
--#define X1205_REG_MO		0x34
--#define X1205_REG_DT		0x33
--#define X1205_REG_HR		0x32
--#define X1205_REG_MN		0x31
--#define X1205_REG_SC		0x30
--#define X1205_REG_DTR		0x13
--#define X1205_REG_ATR		0x12
--#define X1205_REG_INT		0x11
--#define X1205_REG_0		0x10
--#define X1205_REG_Y2K1		0x0F
--#define X1205_REG_DWA1		0x0E
--#define X1205_REG_YRA1		0x0D
--#define X1205_REG_MOA1		0x0C
--#define X1205_REG_DTA1		0x0B
--#define X1205_REG_HRA1		0x0A
--#define X1205_REG_MNA1		0x09
--#define X1205_REG_SCA1		0x08
--#define X1205_REG_Y2K0		0x07
--#define X1205_REG_DWA0		0x06
--#define X1205_REG_YRA0		0x05
--#define X1205_REG_MOA0		0x04
--#define X1205_REG_DTA0		0x03
--#define X1205_REG_HRA0		0x02
--#define X1205_REG_MNA0		0x01
--#define X1205_REG_SCA0		0x00
--
--#define X1205_CCR_BASE		0x30	/* Base address of CCR */
--#define X1205_ALM0_BASE		0x00	/* Base address of ALARM0 */
--
--#define X1205_SR_RTCF		0x01	/* Clock failure */
--#define X1205_SR_WEL		0x02	/* Write Enable Latch */
--#define X1205_SR_RWEL		0x04	/* Register Write Enable */
--
--#define X1205_DTR_DTR0		0x01
--#define X1205_DTR_DTR1		0x02
--#define X1205_DTR_DTR2		0x04
--
--#define X1205_HR_MIL		0x80	/* Set in ccr.hour for 24 hr mode */
--
- /* Prototypes */
-+
- static int x1205_attach(struct i2c_adapter *adapter);
- static int x1205_detach(struct i2c_client *client);
- static int x1205_probe(struct i2c_adapter *adapter, int address, int kind);
--static int x1205_command(struct i2c_client *client, unsigned int cmd,
--	void *arg);
-+static int x1205_validate_client(struct i2c_client *client);
-+
-+static int x1205_get_datetime(struct i2c_client *client, struct rtc_time *tm,
-+				u8 reg_base);
-+static int x1205_set_datetime(struct i2c_client *client, struct rtc_time *tm,
-+				int datetoo, u8 reg_base);
-+static int x1205_validate_tm(struct rtc_time *tm);
-+static int x1205_command(struct i2c_client *client, unsigned int cmd, void *arg);
-+static int x1205_hctosys(struct i2c_client *client);
-+
- 
- static struct i2c_driver x1205_driver = {
- 	.owner		= THIS_MODULE,
-@@ -110,6 +65,7 @@ static struct i2c_driver x1205_driver = 
- 	.flags		= I2C_DF_NOTIFY,
- 	.attach_adapter = &x1205_attach,
- 	.detach_client	= &x1205_detach,
-+/*	.command	= &x1205_command,*/
- };
- 
- struct x1205_data {
-@@ -118,8 +74,9 @@ struct x1205_data {
- 	unsigned int epoch;
- };
- 
--static const unsigned char days_in_mo[] =
--	{ 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31 };
-+
-+static const unsigned char days_in_mo[] = 
-+{31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31};
- 
- static LIST_HEAD(x1205_clients);
- 
-@@ -127,6 +84,7 @@ static LIST_HEAD(x1205_clients);
-  * commands to a specific client. This function will send the command
-  * to the first client.
-  */
-+
- int x1205_do_command(unsigned int cmd, void *arg)
- {
- 	struct list_head *walk;
-@@ -141,114 +99,98 @@ int x1205_do_command(unsigned int cmd, v
- 	return -ENODEV;
- }
- 
--#define is_leap(year) \
--	((year) % 4 == 0 && ((year) % 100 != 0 || (year) % 400 == 0))
--
--/* make sure the rtc_time values are in bounds */
--static int x1205_validate_tm(struct rtc_time *tm)
--{
--	int year = tm->tm_year + 1900;
--
--	if ((tm->tm_year < 70) || (tm->tm_year > 255))
--		return -EINVAL;
--
--	if ((tm->tm_mon > 11) || (tm->tm_mday == 0))
--		return -EINVAL;
--
--	if (tm->tm_mday > days_in_mo[tm->tm_mon]
--		+ ((tm->tm_mon == 1) && is_leap(year)))
--		return -EINVAL;
--
--	if ((tm->tm_hour >= 24) || (tm->tm_min >= 60) || (tm->tm_sec >= 60))
--		return -EINVAL;
--
--	return 0;
--}
- 
- /*
-- * In the routines that deal directly with the x1205 hardware, we use
-+ * in the routines that deal directly with the x1205 hardware, we use
-  * rtc_time -- month 0-11, hour 0-23, yr = calendar year-epoch
-- * Epoch is initialized as 2000. Time is set to UTC.
-+ * Epoch is inited as 2000. Time is set to UT
-  */
-+
- static int x1205_get_datetime(struct i2c_client *client, struct rtc_time *tm,
- 				u8 reg_base)
- {
--	unsigned char dt_addr[2] = { 0, reg_base };
--	static unsigned char sr_addr[2] = { 0, X1205_REG_SR };
-+	static unsigned char dt_addr[] = { 0, };
-+	static unsigned char sr_addr[] = { 0, };
- 
--	unsigned char buf[8], sr;
-+	unsigned char buf[8], sr;	
- 
- 	struct i2c_msg msgs[] = {
--		{ client->addr, 0, 2, sr_addr },	/* setup read ptr */
--		{ client->addr, I2C_M_RD, 1, &sr }, 	/* read status */
--		{ client->addr, 0, 2, dt_addr },	/* setup read ptr */
--		{ client->addr, I2C_M_RD, 8, buf },	/* read date */
-+		{ client->addr, 0, 2, sr_addr }, 	/* random read */
-+		{ client->addr, I2C_M_RD, 1, &sr }, 
-+		{ client->addr, 0, 2, dt_addr },	/* random read */
-+		{ client->addr, I2C_M_RD, 8, buf },
- 	};
- 
--	struct x1205_data *data = i2c_get_clientdata(client);
-+	struct x1205_data *xdata = i2c_get_clientdata(client);
- 
--	/* read status register */
--	if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) {
--		dev_err(&client->dev, "%s: read error\n", __FUNCTION__);
--		return -EIO;
--	}
-+	dt_addr[1] = reg_base;
-+	sr_addr[1] = X1205_REG_SR;
- 
--	/* check for battery failure */
--	if (sr & X1205_SR_RTCF) {
--		dev_warn(&client->dev,
--			"Clock had a power failure, you must set the date.\n");
--		return -EINVAL;
--	}
-+	if ((i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs))) ==
-+		ARRAY_SIZE(msgs)) {
-+		/* did we read the correct number of messages? */
-+
-+		/* check for battery failure */
-+		if (sr & X1205_SR_RTCF)
-+		{	
-+			dev_info(&client->adapter->dev,
-+				"%s: Clock had a power failure, you must set the date.\n",
-+				DRIVER_NAME);
- 
--	/* read date registers */
--	if ((i2c_transfer(client->adapter, &msgs[2], 2)) != 2) {
--		dev_err(&client->dev, "%s: read error\n", __FUNCTION__);
--		return -EIO;
--	}
--
--	dev_dbg(&client->dev,
--		"%s: raw read data - sec=%02x, min=%02x, hr=%02x, "
--		"mday=%02x, mon=%02x, year=%02x, wday=%02x, y2k=%02x\n",
--		__FUNCTION__,
--		buf[0], buf[1], buf[2], buf[3],
--		buf[4], buf[5], buf[6], buf[7]);
--
--	tm->tm_sec = BCD2BIN(buf[CCR_SEC]);
--	tm->tm_min = BCD2BIN(buf[CCR_MIN]);
--	tm->tm_hour = BCD2BIN(buf[CCR_HOUR] & 0x3F); /* hr is 0-23 */
--	tm->tm_mday = BCD2BIN(buf[CCR_MDAY]);
--	tm->tm_mon = BCD2BIN(buf[CCR_MONTH]);
--	data->epoch = BCD2BIN(buf[CCR_Y2K]) * 100;
--	tm->tm_year = BCD2BIN(buf[CCR_YEAR]) + data->epoch - 1900;
--	tm->tm_wday = buf[CCR_WDAY];
-+			return -EINVAL;
-+		}
- 
--	dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d, "
--		"mday=%d, mon=%d, year=%d, wday=%d\n",
--		__FUNCTION__,
--		tm->tm_sec, tm->tm_min, tm->tm_hour,
--		tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
-+		dev_dbg(&client->dev,
-+			"%s: raw read data - sec-%02x min-%02x hr-%02x"
-+			" mday-%02x mon-%02x year-%02x wday-%02x y2k-%02x\n", 
-+			__FUNCTION__,
-+			buf[0], buf[1], buf[2], buf[3],
-+			buf[4], buf[5], buf[6], buf[7]);
-+
-+		tm->tm_sec  = BCD2BIN(buf[CCR_SEC]);
-+		tm->tm_min  = BCD2BIN(buf[CCR_MIN]);
-+		buf[CCR_HOUR] &= ~X1205_HR_MIL;
-+		tm->tm_hour = BCD2BIN(buf[CCR_HOUR]); /* hr is 0-23 */
-+		tm->tm_mday = BCD2BIN(buf[CCR_MDAY]);
-+		tm->tm_mon  = BCD2BIN(buf[CCR_MONTH]);
-+		xdata->epoch   = BCD2BIN(buf[CCR_Y2K]) * 100;
-+		tm->tm_year = BCD2BIN(buf[CCR_YEAR]) + xdata->epoch - EPOCH_1900;
-+		tm->tm_wday = buf[CCR_WDAY];
-+
-+		dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d, "
-+			"mday=%d, mon=%d, year=%d, wday=%d\n",
-+			__FUNCTION__,
-+			tm->tm_sec, tm->tm_min, tm->tm_hour,
-+			tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
- 
-+	} else {
-+		dev_dbg(&client->dev, "%s: read error\n", __FUNCTION__);
-+		return -EIO;
-+	}		
-+	
- 	return 0;
- }
- 
-+
- static int x1205_set_datetime(struct i2c_client *client, struct rtc_time *tm,
- 				int datetoo, u8 reg_base)
- {
- 	int i, err, xfer;
- 
--	unsigned char buf[8];
-+	static unsigned char wel[3]   = { 0, X1205_REG_SR,
-+					X1205_SR_WEL };
- 
--	static const unsigned char wel[3] = { 0, X1205_REG_SR,
--						X1205_SR_WEL };
- 
--	static const unsigned char rwel[3] = { 0, X1205_REG_SR,
--						X1205_SR_WEL | X1205_SR_RWEL };
-+	static unsigned char rwel[3]  = { 0, X1205_REG_SR,
-+					X1205_SR_WEL | X1205_SR_RWEL };
- 
--	static const unsigned char diswe[3] = { 0, X1205_REG_SR, 0 };
-+	static unsigned char diswe[3] = { 0, X1205_REG_SR, 0 };
- 
--	struct x1205_data *data = i2c_get_clientdata(client);
-+	static unsigned char data[3]  = { 0, };
-+	static unsigned char buf[8];
-+
-+	struct x1205_data *xdata = i2c_get_clientdata(client);
- 
--	/* check if all values in the tm struct are correct */
- 	if ((err = x1205_validate_tm(tm)) < 0)
- 		return err;
- 
-@@ -258,124 +200,52 @@ static int x1205_set_datetime(struct i2c
- 		tm->tm_sec, tm->tm_min, tm->tm_hour,
- 		tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
- 
--	buf[CCR_SEC] = BIN2BCD(tm->tm_sec);
--	buf[CCR_MIN] = BIN2BCD(tm->tm_min);
- 
--	/* set hour and 24hr bit */
-+	buf[CCR_SEC]  = BIN2BCD(tm->tm_sec);
-+	buf[CCR_MIN]  = BIN2BCD(tm->tm_min);
-+
-+	/* Set 24HR format */
- 	buf[CCR_HOUR] = BIN2BCD(tm->tm_hour) | X1205_HR_MIL;
- 
--	/* should we also set the date? */
--	if (datetoo) {
--		buf[CCR_MDAY] = BIN2BCD(tm->tm_mday);
-+	if (datetoo == X1205_DATETOO) {
-+		buf[CCR_MDAY]  = BIN2BCD(tm->tm_mday);
- 
- 		/* month, 0 - 11 */
--		buf[CCR_MONTH] = BIN2BCD(tm->tm_mon);
-+		buf[CCR_MONTH] = BIN2BCD(tm->tm_mon);	/* input is 0-11 */
- 
- 		/* year, since 1900 */
--		buf[CCR_YEAR] = BIN2BCD(tm->tm_year + 1900 - data->epoch);
--		buf[CCR_WDAY] = tm->tm_wday & 0x07;
--		buf[CCR_Y2K] = BIN2BCD(data->epoch / 100);
-+		buf[CCR_YEAR]  = BIN2BCD((tm->tm_year + EPOCH_1900 - xdata->epoch));
-+		buf[CCR_WDAY]  = tm->tm_wday & 7;
-+		buf[CCR_Y2K]   = BIN2BCD(xdata->epoch / 100);
- 	}
- 
--	/* this sequence is required to unlock the chip */
- 	xfer = i2c_master_send(client, wel, 3);
--	if (xfer != 3) {
--		dev_err(&client->dev, "%s: wel - %d\n", __FUNCTION__, xfer);
-+	dev_dbg(&client->dev, "%s: wen - %x\n", __FUNCTION__, xfer);
-+	if (xfer != 3)
- 		return -EIO;
--	}
- 
- 	xfer = i2c_master_send(client, rwel, 3);
--	if (xfer != 3) {
--		dev_err(&client->dev, "%s: rwel - %d\n", __FUNCTION__, xfer);
-+	dev_dbg(&client->dev, "%s: wenb - %x\n", __FUNCTION__, xfer);
-+	if (xfer != 3)
- 		return -EIO;
--	}
- 
--	/* write register's data */
--	for (i = 0; i < (datetoo ? 8 : 3); i++) {
--		unsigned char rdata[3] = { 0, reg_base + i, buf[i] };
--
--		xfer = i2c_master_send(client, rdata, 3);
--		if (xfer != 3) {
--			dev_err(&client->dev,
--				"%s: xfer=%d addr=%02x, data=%02x\n",
--				__FUNCTION__,
--				 xfer, rdata[1], rdata[2]);
-+	for (i = 0; i < 8; i++) {
-+		data[1] = i + reg_base;
-+		data[2] =  buf[i];
-+		xfer = i2c_master_send(client, data, 3);
-+
-+		dev_dbg(&client->dev, "%s: xfer %d addr, %02x,  data %02x\n",
-+			__FUNCTION__,
-+			 xfer, data[1], data[2]);
-+
-+		if (xfer != 3)
- 			return -EIO;
--		}
- 	};
- 
--	/* disable further writes */
- 	xfer = i2c_master_send(client, diswe, 3);
--	if (xfer != 3) {
--		dev_err(&client->dev, "%s: diswe - %d\n", __FUNCTION__, xfer);
--		return -EIO;
--	}
--
--	return 0;
--}
--
--static int x1205_get_dtrim(struct i2c_client *client, int *trim)
--{
--	unsigned char dtr;
--	static unsigned char dtr_addr[2] = { 0, X1205_REG_DTR };
--
--	struct i2c_msg msgs[] = {
--		{ client->addr, 0, 2, dtr_addr },	/* setup read ptr */
--		{ client->addr, I2C_M_RD, 1, &dtr }, 	/* read dtr */
--	};
--
--	/* read dtr register */
--	if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) {
--		dev_err(&client->dev, "%s: read error\n", __FUNCTION__);
--		return -EIO;
--	}
--
--	dev_dbg(&client->dev, "%s: raw dtr=%x\n", __FUNCTION__, dtr);
--
--	*trim = 0;
--
--	if (dtr & X1205_DTR_DTR0)
--		*trim += 20;
--
--	if (dtr & X1205_DTR_DTR1)
--		*trim += 10;
--
--	if (dtr & X1205_DTR_DTR2)
--		*trim = -*trim;
--
--	return 0;
--}
--
--static int x1205_get_atrim(struct i2c_client *client, int *trim)
--{
--	s8 atr;
--	static unsigned char atr_addr[2] = { 0, X1205_REG_ATR };
--
--	struct i2c_msg msgs[] = {
--		{ client->addr, 0, 2, atr_addr },	/* setup read ptr */
--		{ client->addr, I2C_M_RD, 1, &atr }, 	/* read atr */
--	};
--
--	/* read atr register */
--	if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) {
--		dev_err(&client->dev, "%s: read error\n", __FUNCTION__);
--		return -EIO;
--	}
--
--	dev_dbg(&client->dev, "%s: raw atr=%x\n", __FUNCTION__, atr);
--
--	/* atr is a two's complement value on 6 bits,
--	 * perform sign extension. The formula is
--	 * Catr = (atr * 0.25pF) + 11.00pF.
--	 */
--	if (atr & 0x20)
--		atr |= 0xC0;
--
--	dev_dbg(&client->dev, "%s: raw atr=%x (%d)\n", __FUNCTION__, atr, atr);
--
--	*trim = (atr * 250) + 11000;
--
--	dev_dbg(&client->dev, "%s: real=%d\n", __FUNCTION__, *trim);
-+	dev_dbg(&client->dev, "%s: wdis - %x\n", __FUNCTION__, xfer);
-+	if (xfer != 3)
-+		return -EIO;		
- 
- 	return 0;
- }
-@@ -386,24 +256,28 @@ static int x1205_hctosys(struct i2c_clie
- 
- 	struct rtc_time tm;
- 	struct timespec tv;
-+	
- 
- 	err = x1205_command(client, X1205_CMD_GETDATETIME, &tm);
- 
--	if (err) {
--		dev_err(&client->dev,
--			"Unable to set the system clock\n");
-+	if (err)
-+	{
-+		dev_info(&client->adapter->dev,
-+			"%s: Unable to set the system clock\n",
-+			DRIVER_NAME);
-+
- 		return err;
-+
- 	}
- 
--	/* IMPORTANT: the RTC only stores whole seconds. It is arbitrary
--	 * whether it stores the most close value or the value with partial
--	 * seconds truncated. However, it is important that we use it to store
--	 * the truncated value. This is because otherwise it is necessary,
--	 * in an rtc sync function, to read both xtime.tv_sec and
--	 * xtime.tv_nsec. On some processors (i.e. ARM), an atomic read
--	 * of >32bits is not possible. So storing the most close value would
--	 * slow down the sync API. So here we have the truncated value and
--	 * the best guess is to add 0.5s.
-+	/* IMPORTANT: the RTC only stores whole seconds.  It is arbitrary whether
-+	 * it stores the most close value or the value with partial seconds
-+	 * truncated, however it is important for x1205_sync_rtc that it be
-+	 * defined to store the truncated value.  This is because otherwise it
-+	 * is necessary to read both xtime.tv_sec and xtime.tv_nsec in the
-+	 * sync function, and atomic reads of >32bits on ARM are not possible.
-+	 * So storing the most close value would slow down the sync API.  So
-+	 * Here we have the truncated value and the best guess is to add 0.5s
- 	 */
- 
- 	tv.tv_nsec = NSEC_PER_SEC >> 1;
-@@ -413,15 +287,16 @@ static int x1205_hctosys(struct i2c_clie
- 	 * the month to be in the range 1-12
- 	 */
- 
--	tv.tv_sec  = mktime(tm.tm_year + 1900, tm.tm_mon + 1,
-+	tv.tv_sec  = mktime(tm.tm_year + EPOCH_1900, tm.tm_mon + 1,
- 				tm.tm_mday, tm.tm_hour,
- 				tm.tm_min, tm.tm_sec);
- 
- 	do_settimeofday(&tv);
- 
--	dev_info(&client->dev,
--		"setting the system clock to %d-%d-%d %d:%d:%d\n",
--		tm.tm_year + 1900, tm.tm_mon + 1,
-+	dev_info(&client->adapter->dev,
-+		"%s: Setting the system clock to %d-%d-%d %d:%d:%d\n",
-+		DRIVER_NAME,
-+		tm.tm_year + EPOCH_1900, tm.tm_mon + 1,
- 		tm.tm_mday, tm.tm_hour, tm.tm_min,
- 		tm.tm_sec);
- 
-@@ -432,7 +307,7 @@ struct x1205_limit
- {
- 	unsigned char reg;
- 	unsigned char mask;
--	unsigned char min;
-+	unsigned char min;	
- 	unsigned char max;
- };
- 
-@@ -443,16 +318,34 @@ static int x1205_validate_client(struct 
- 	/* Probe array. We will read the register at the specified
- 	 * address and check if the given bits are zero.
- 	 */
--	static const unsigned char probe_zero_pattern[] = {
--		/* register, mask */
-+
-+	const unsigned char probe_zero_pattern[] = {
-+
- 		X1205_REG_SR,	0x18,
-+		X1205_REG_Y2K,	0xC6,
-+		X1205_REG_DW,	0xF8,
-+		X1205_REG_MO,	0xE0,
-+		X1205_REG_DT,	0xC0,
-+		X1205_REG_HR,	0x40,
-+		X1205_REG_MN,	0x80,
-+		X1205_REG_SC,	0x80,
- 		X1205_REG_DTR,	0xF8,
- 		X1205_REG_ATR,	0xC0,
- 		X1205_REG_INT,	0x18,
- 		X1205_REG_0,	0xFF,
-+		X1205_REG_Y2K1,	0xC6,
-+		X1205_REG_DWA1,	0x78,
-+		X1205_REG_MOA1,	0x60,
-+		X1205_REG_DTA1,	0x40,
-+		X1205_REG_HRA1,	0x40,
-+		X1205_REG_Y2K0,	0xC6,
-+		X1205_REG_DWA0,	0x78,
-+		X1205_REG_MOA0,	0x60,
-+		X1205_REG_DTA0,	0x40,
-+		X1205_REG_HRA0,	0x40,
- 	};
- 
--	static const struct x1205_limit probe_limits_pattern[] = {
-+	const struct x1205_limit probe_limits_pattern[] = {
- 		/* register, mask, min, max */
- 		{ X1205_REG_Y2K,	0xFF,	19,	20	},
- 		{ X1205_REG_DW,		0xFF,	0,	6	},
-@@ -463,23 +356,41 @@ static int x1205_validate_client(struct 
- 		{ X1205_REG_MN,		0xFF,	0,	59	},
- 		{ X1205_REG_SC,		0xFF,	0,	59	},
- 		{ X1205_REG_Y2K1,	0xFF,	19,	20	},
-+		{ X1205_REG_DWA1,	0x7F,	0,	6	},
-+		{ X1205_REG_MOA1,	0x7F,	0,	12	},
-+		{ X1205_REG_DTA1,	0x7F,	0,	31	},
-+		{ X1205_REG_HRA1,	0x7F,	0,	23	},
-+		{ X1205_REG_MNA1,	0x7F,	0,	59	},
-+		{ X1205_REG_SCA1,	0x7F,	0,	59	},
- 		{ X1205_REG_Y2K0,	0xFF,	19,	20	},
-+		{ X1205_REG_DWA0,	0x7F,	0,	6	},
-+		{ X1205_REG_MOA0,	0x7F,	0,	12	},
-+		{ X1205_REG_DTA0,	0x7F,	0,	31	},
-+		{ X1205_REG_HRA0,	0x7F,	0,	23	},
-+		{ X1205_REG_MNA0,	0x7F,	0,	59	},
-+		{ X1205_REG_SCA0,	0x7F,	0,	59	},
- 	};
- 
- 	/* check that registers have bits a 0 where expected */
--	for (i = 0; i < ARRAY_SIZE(probe_zero_pattern); i += 2) {
-+
-+	for (i = 0; i < ARRAY_SIZE(probe_zero_pattern); i += 2)
-+	{
- 		unsigned char buf;
- 
--		unsigned char addr[2] = { 0, probe_zero_pattern[i] };
-+		static unsigned char addr[2];
- 
- 		struct i2c_msg msgs[2] = {
--			{ client->addr, 0, 2, addr },
-+			{ client->addr, 0, 2, addr },	/* random read */
- 			{ client->addr, I2C_M_RD, 1, &buf },
- 		};
- 
-+		addr[0] = 0x00;
-+		addr[1] = probe_zero_pattern[i];
-+
- 		xfer = i2c_transfer(client->adapter, msgs, 2);
-+
- 		if (xfer != 2) {
--			dev_err(&client->adapter->dev,
-+			dev_dbg(&client->adapter->dev, 
- 				"%s: could not read register %x\n",
- 				__FUNCTION__, addr[1]);
- 
-@@ -487,42 +398,47 @@ static int x1205_validate_client(struct 
- 		}
- 
- 		if ((buf & probe_zero_pattern[i+1]) != 0) {
--			dev_err(&client->adapter->dev,
--				"%s: register=%02x, zero pattern=%d, value=%x\n",
-+			dev_dbg(&client->adapter->dev,
-+				"%s: register %x, zero pattern %d: %x\n",
- 				__FUNCTION__, addr[1], i, buf);
- 
- 			return -ENODEV;
- 		}
- 	}
- 
--	/* check limits (only registers with bcd values) */
--	for (i = 0; i < ARRAY_SIZE(probe_limits_pattern); i++) {
--		unsigned char reg, value;
-+	/* check limits */
- 
--		unsigned char addr[2] = { 0, probe_limits_pattern[i].reg };
-+	for (i = 0; i < ARRAY_SIZE(probe_limits_pattern); i++)
-+	{
-+		unsigned char buf, val;
-+
-+		static unsigned char addr[2];
- 
- 		struct i2c_msg msgs[2] = {
--			{ client->addr, 0, 2, addr },
--			{ client->addr, I2C_M_RD, 1, &reg },
-+			{ client->addr, 0, 2, addr },	/* random read */
-+			{ client->addr, I2C_M_RD, 1, &buf },
- 		};
- 
-+		addr[0] = 0x00;
-+		addr[1] = probe_limits_pattern[i].reg;
-+
- 		xfer = i2c_transfer(client->adapter, msgs, 2);
- 
- 		if (xfer != 2) {
--			dev_err(&client->adapter->dev,
-+			dev_dbg(&client->adapter->dev, 
- 				"%s: could not read register %x\n",
- 				__FUNCTION__, addr[1]);
- 
- 			return -EIO;
- 		}
- 
--		value = BCD2BIN(reg & probe_limits_pattern[i].mask);
-+		val = BCD2BIN(buf & probe_limits_pattern[i].mask);
- 
--		if (value > probe_limits_pattern[i].max ||
--			value < probe_limits_pattern[i].min) {
-+		if (val > probe_limits_pattern[i].max ||
-+			val < probe_limits_pattern[i].min) {
- 			dev_dbg(&client->adapter->dev,
--				"%s: register=%x, lim pattern=%d, value=%d\n",
--				__FUNCTION__, addr[1], i, value);
-+				"%s: register %x, lim pattern %d: %d\n",
-+				__FUNCTION__, addr[1], i, val);
- 
- 			return -ENODEV;
- 		}
-@@ -538,79 +454,66 @@ static int x1205_attach(struct i2c_adapt
- 	return i2c_probe(adapter, &addr_data, x1205_probe);
- }
- 
--int x1205_direct_attach(int adapter_id,
--	struct i2c_client_address_data *address_data)
--{
--	int err;
--	struct i2c_adapter *adapter = i2c_get_adapter(adapter_id);
--
--	if (adapter) {
--		err = i2c_probe(adapter,
--			address_data, x1205_probe);
--
--		i2c_put_adapter(adapter);
--
--		return err;
--	}
--
--	return -ENODEV;
--}
--
- static int x1205_probe(struct i2c_adapter *adapter, int address, int kind)
- {
--	struct i2c_client *client;
--	struct x1205_data *data;
-+	struct i2c_client *new_client;
-+	struct x1205_data *xdata;
- 
- 	int err = 0;
- 
- 	dev_dbg(&adapter->dev, "%s\n", __FUNCTION__);
- 
--	if (!i2c_check_functionality(adapter, I2C_FUNC_I2C)) {
--		err = -ENODEV;
--		goto exit;
--	}
--
--	if (!(data = kzalloc(sizeof(struct x1205_data), GFP_KERNEL))) {
-+	if (!(xdata = kmalloc(sizeof(struct x1205_data), GFP_KERNEL))) {
- 		err = -ENOMEM;
- 		goto exit;
- 	}
- 
--	/* Initialize our structures */
--	data->epoch = 2000;
-+	/* Fill our data structure */
- 
--	client = &data->client;
--	client->addr = address;
--	client->driver = &x1205_driver;
--	client->adapter	= adapter;
-+	memset(xdata, 0, sizeof(struct x1205_data));
- 
--	strlcpy(client->name, "x1205", I2C_NAME_SIZE);
-+	xdata->epoch = 2000;
-+
-+
-+	/* Prepare i2c_client structure */
-+
-+	new_client		= &xdata->client;
-+	i2c_set_clientdata(new_client, xdata);
-+	new_client->addr	= address;
-+	new_client->adapter	= adapter;
-+	new_client->driver	= &x1205_driver;
-+	new_client->flags	= 0;
-+	
-+	strlcpy(new_client->name, "x1205", I2C_NAME_SIZE);
- 
--	i2c_set_clientdata(client, data);
- 
- 	/* Verify the chip is really an X1205 */
--	if (kind < 0) {
--		if (x1205_validate_client(client) < 0) {
-+
-+	if (kind < 0)
-+	{
-+		if (x1205_validate_client(new_client) < 0) {
- 			err = -ENODEV;
- 			goto exit_kfree;
- 		}
- 	}
- 
- 	/* Inform the i2c layer */
--	if ((err = i2c_attach_client(client)))
-+	if ((err = i2c_attach_client(new_client)))
- 		goto exit_kfree;
- 
--	list_add(&data->list, &x1205_clients);
-+	list_add(&xdata->list, &x1205_clients);
- 
--	dev_info(&client->dev, "chip found, driver version " DRV_VERSION "\n");
-+	dev_info(&adapter->dev, "%s: Chip found, driver " DRIVER_VERSION "\n",
-+			DRIVER_NAME);
- 
--	/* If requested, set the system time */
-+	/* If requested, se the system time */
- 	if (hctosys)
--		x1205_hctosys(client);
-+		x1205_hctosys(new_client);
- 
- 	return 0;
- 
- exit_kfree:
--	kfree(data);
-+	kfree(xdata);
- 
- exit:
- 	return err;
-@@ -620,23 +523,44 @@ static int x1205_detach(struct i2c_clien
- {
- 	int err;
- 	struct x1205_data *data = i2c_get_clientdata(client);
--
-+	
- 	dev_dbg(&client->dev, "%s\n", __FUNCTION__);
- 
- 	if ((err = i2c_detach_client(client)))
- 		return err;
- 
- 	list_del(&data->list);
--
- 	kfree(data);
-+	return 0;
-+}
-+
-+/* make sure the rtc_time values are in bounds */
-+static int x1205_validate_tm(struct rtc_time *tm)
-+{
-+	tm->tm_year += 1900;
-+
-+	if (tm->tm_year < EPOCH_1970)
-+		return -EINVAL;
-+
-+	if ((tm->tm_mon > 11) || (tm->tm_mday == 0))
-+		return -EINVAL;
-+
-+	if (tm->tm_mday > (days_in_mo[tm->tm_mon] + ( (tm->tm_mon == 1) && 
-+		((!(tm->tm_year % 4) && (tm->tm_year % 100) ) || !(tm->tm_year % 400)))))
-+		return -EINVAL;
-+
-+	if ((tm->tm_year -= EPOCH_1900) > 255)
-+		return -EINVAL;
-+			
-+	if ((tm->tm_hour >= 24) || (tm->tm_min >= 60) || (tm->tm_sec >= 60))
-+		return -EINVAL;
- 
- 	return 0;
- }
- 
--static int x1205_command(struct i2c_client *client, unsigned int cmd,
--	void *param)
-+static int x1205_command(struct i2c_client *client, unsigned int cmd, void *tm)
- {
--	if (param == NULL)
-+	if (client == NULL || tm == NULL)
- 		return -EINVAL;
- 
- 	if (!capable(CAP_SYS_TIME))
-@@ -646,34 +570,26 @@ static int x1205_command(struct i2c_clie
- 
- 	switch (cmd) {
- 	case X1205_CMD_GETDATETIME:
--		return x1205_get_datetime(client, param, X1205_CCR_BASE);
-+		return x1205_get_datetime(client, tm, X1205_CCR_BASE);
- 
- 	case X1205_CMD_SETTIME:
--		return x1205_set_datetime(client, param, 0,
--				X1205_CCR_BASE);
-+		return x1205_set_datetime(client, tm, X1205_NODATE, X1205_CCR_BASE);
- 
- 	case X1205_CMD_SETDATETIME:
--		return x1205_set_datetime(client, param, 1,
--				X1205_CCR_BASE);
-+		return x1205_set_datetime(client, tm, X1205_DATETOO, X1205_CCR_BASE);
- 
- 	case X1205_CMD_GETALARM:
--		return x1205_get_datetime(client, param, X1205_ALM0_BASE);
-+		return x1205_get_datetime(client, tm, X1205_ALM0_BASE);
- 
- 	case X1205_CMD_SETALARM:
--		return x1205_set_datetime(client, param, 1,
--				X1205_ALM0_BASE);
--
--	case X1205_CMD_GETDTRIM:
--		return x1205_get_dtrim(client, param);
--
--	case X1205_CMD_GETATRIM:
--		return x1205_get_atrim(client, param);
-+		return x1205_set_datetime(client, tm, X1205_DATETOO, X1205_ALM0_BASE);
- 
- 	default:
- 		return -EINVAL;
- 	}
- }
- 
-+
- static int __init x1205_init(void)
- {
- 	return i2c_add_driver(&x1205_driver);
-@@ -689,10 +605,8 @@ MODULE_AUTHOR(
- 	"Alessandro Zummo <a.zummo@towertech.it>");
- MODULE_DESCRIPTION("Xicor X1205 RTC driver");
- MODULE_LICENSE("GPL");
--MODULE_VERSION(DRV_VERSION);
- 
- EXPORT_SYMBOL_GPL(x1205_do_command);
--EXPORT_SYMBOL_GPL(x1205_direct_attach);
- 
- module_init(x1205_init);
- module_exit(x1205_exit);
---- linux-2.6.14/include/linux/x1205.h.orig	2005-11-07 22:38:42.196252187 -0800
-+++ linux-2.6.14/include/linux/x1205.h	2005-11-07 22:42:54.960157617 -0800
-@@ -1,31 +1,67 @@
--/*
-- *  x1205.h - defines for drivers/i2c/chips/x1205.c
-- *  Copyright 2004 Karen Spearel
-- *  Copyright 2005 Alessandro Zummo
-- *
-- *  This program is free software; you can redistribute it and/or modify
-- *  it under the terms of the GNU General Public License as published by
-- *  the Free Software Foundation; either version 2 of the License, or
-- *  (at your option) any later version.
-- */
--
--#ifndef __LINUX_X1205_H__
--#define __LINUX_X1205_H__
- 
- /* commands */
- 
--#define X1205_CMD_GETDATETIME	0
--#define X1205_CMD_SETTIME	1
--#define X1205_CMD_SETDATETIME	2
-+#define	X1205_CMD_GETDATETIME	0
-+#define	X1205_CMD_SETTIME	1
-+#define	X1205_CMD_SETDATETIME	2
- #define X1205_CMD_GETALARM	3
- #define X1205_CMD_SETALARM	4
--#define X1205_CMD_GETDTRIM	5
--#define X1205_CMD_SETDTRIM	6
--#define X1205_CMD_GETATRIM	7
--#define X1205_CMD_SETATRIM	8
-+
-+/* flags */
-+
-+#define	X1205_NODATE		0
-+#define	X1205_DATETOO		1
-+
-+/*  offsets into read buf - add 2 for write buf */
-+
-+#define	CCR_SEC			0
-+#define	CCR_MIN			1
-+#define	CCR_HOUR		2
-+#define	CCR_MDAY		3
-+#define	CCR_MONTH		4
-+#define	CCR_YEAR		5
-+#define	CCR_WDAY		6
-+#define	CCR_Y2K			7
-+
-+#define	X1205_REG_SR		0x3F	/* status register */
-+#define	X1205_REG_Y2K		0x37
-+#define	X1205_REG_DW		0x36
-+#define	X1205_REG_YR		0x35
-+#define	X1205_REG_MO		0x34
-+#define	X1205_REG_DT		0x33
-+#define	X1205_REG_HR		0x32
-+#define	X1205_REG_MN		0x31
-+#define	X1205_REG_SC		0x30
-+#define	X1205_REG_DTR		0x13
-+#define	X1205_REG_ATR		0x12
-+#define	X1205_REG_INT		0x11
-+#define	X1205_REG_0		0x10
-+#define	X1205_REG_Y2K1		0x0F
-+#define	X1205_REG_DWA1		0x0E
-+#define	X1205_REG_YRA1		0x0D
-+#define	X1205_REG_MOA1		0x0C
-+#define	X1205_REG_DTA1		0x0B
-+#define	X1205_REG_HRA1		0x0A
-+#define	X1205_REG_MNA1		0x09
-+#define	X1205_REG_SCA1		0x08
-+#define	X1205_REG_Y2K0		0x07
-+#define	X1205_REG_DWA0		0x06
-+#define	X1205_REG_YRA0		0x05
-+#define	X1205_REG_MOA0		0x04
-+#define	X1205_REG_DTA0		0x03
-+#define	X1205_REG_HRA0		0x02
-+#define	X1205_REG_MNA0		0x01
-+#define	X1205_REG_SCA0		0x00
-+
-+#define	X1205_I2C_BUS_ADDR	0x6f	/* hardwired into x1205 */
-+#define	X1205_CCR_BASE		0x30	/* Base address of CCR */
-+#define	X1205_ALM0_BASE		0x00	/* Base address of ALARM0 */
-+
-+#define X1205_SR_RTCF		0x01
-+#define	X1205_SR_WEL		0x02	/* Write Enable Latch bit */
-+#define	X1205_SR_RWEL		0x04	/* Register Write Enable Bit */
-+
-+#define	X1205_HR_MIL		0x80	/* set in ccr.hour for 24 hr mode */
- 
- extern int x1205_do_command(unsigned int cmd, void *arg);
--extern int x1205_direct_attach(int adapter_id,
--	struct i2c_client_address_data *address_data);
- 
--#endif /* __LINUX_X1205_H__ */
diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6.14-mm/80-nslu2-class-device-create.patch b/packages/obsolete/nslu2/nslu2-kernel/2.6.14-mm/80-nslu2-class-device-create.patch
deleted file mode 100644
index 116f95b2f7..0000000000
--- a/packages/obsolete/nslu2/nslu2-kernel/2.6.14-mm/80-nslu2-class-device-create.patch
+++ /dev/null
@@ -1,20 +0,0 @@
---- linux-2.6.14/arch/arm/mach-ixp4xx/nslu2-io.c.orig	2005-11-07 22:26:36.010556202 -0800
-+++ linux-2.6.14/arch/arm/mach-ixp4xx/nslu2-io.c	2005-11-07 22:27:15.921067613 -0800
-@@ -504,7 +504,7 @@ static int __init n2iom_init(void)
- 		return -EBUSY;
- 	}
- 	else {
--		class_device_create(n2lm_class, MKDEV(NSLU2LM_MAJOR, 0), NULL, "leds");
-+		class_device_create(n2lm_class, NULL, MKDEV(NSLU2LM_MAJOR, 0), NULL, "leds");
- 	}
- #endif
- 
-@@ -513,7 +513,7 @@ static int __init n2iom_init(void)
- 		return -EBUSY;
- 	}
- 	else {
--		class_device_create(n2lm_class, MKDEV(NSLU2BZ_MAJOR, 0), NULL, "buzzer");
-+		class_device_create(n2lm_class, NULL, MKDEV(NSLU2BZ_MAJOR, 0), NULL, "buzzer");
- 	}
- 
- 	return 0;
diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6.14-mm/defconfig b/packages/obsolete/nslu2/nslu2-kernel/2.6.14-mm/defconfig
deleted file mode 100644
index ecb422f0d7..0000000000
--- a/packages/obsolete/nslu2/nslu2-kernel/2.6.14-mm/defconfig
+++ /dev/null
@@ -1,1595 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14
-# Mon Nov  7 22:59:39 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SWAP_PREFETCH=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_EMBEDDED=y
-# CONFIG_KALLSYMS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-# CONFIG_BASE_FULL is not set
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-CONFIG_SLAB=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=1
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_CAMELOT is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-CONFIG_ARCH_IXP4XX=y
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_AAEC2000 is not set
-CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
-
-#
-# Intel IXP4xx Implementation Options
-#
-
-#
-# IXP4xx Platforms
-#
-# CONFIG_ARCH_AVILA is not set
-# CONFIG_ARCH_ADI_COYOTE is not set
-# CONFIG_ARCH_IXDP425 is not set
-# CONFIG_MACH_IXDPG425 is not set
-# CONFIG_MACH_IXDP465 is not set
-CONFIG_MACH_NSLU2=y
-# CONFIG_ARCH_PRPMC1100 is not set
-# CONFIG_MACH_GTWX5715 is not set
-
-#
-# IXP4xx Options
-#
-CONFIG_IXP4XX_INDIRECT_PCI=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-CONFIG_CPU_BIG_ENDIAN=y
-CONFIG_XSCALE_PMU=y
-CONFIG_DMABOUNCE=y
-
-#
-# Bus support
-#
-CONFIG_ISA_DMA_API=y
-CONFIG_PCI=y
-# CONFIG_PCI_LEGACY_PROC is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-# CONFIG_NO_IDLE_HZ is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/mtdblock4 rw rootfstype=jffs2 mem=32M@0x00000000 init=/linuxrc x1205.hctosys=1 noirqdebug console=ttyS0,115200n8"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=m
-CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-CONFIG_INET_IPCOMP=m
-CONFIG_INET_TUNNEL=m
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_IPV6_TUNNEL=m
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_BRIDGE_NETFILTER=y
-# CONFIG_NETFILTER_NETLINK is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=m
-# CONFIG_IP_NF_CT_ACCT is not set
-# CONFIG_IP_NF_CONNTRACK_MARK is not set
-# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
-CONFIG_IP_NF_CT_PROTO_SCTP=m
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-# CONFIG_IP_NF_NETBIOS_NS is not set
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-# CONFIG_IP_NF_PPTP is not set
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_PHYSDEV=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-# CONFIG_IP_NF_MATCH_SCTP is not set
-# CONFIG_IP_NF_MATCH_DCCP is not set
-CONFIG_IP_NF_MATCH_COMMENT=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
-# CONFIG_IP_NF_MATCH_STRING is not set
-CONFIG_IP_NF_FILTER=m
-# CONFIG_IP_NF_TARGET_REJECT is not set
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-# CONFIG_IP_NF_TARGET_NFQUEUE is not set
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-# CONFIG_IP_NF_TARGET_TTL is not set
-# CONFIG_IP_NF_RAW is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-
-#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP6_NF_QUEUE is not set
-# CONFIG_IP6_NF_IPTABLES is not set
-# CONFIG_IP6_NF_TARGET_NFQUEUE is not set
-
-#
-# Bridge: Netfilter Configuration
-#
-# CONFIG_BRIDGE_NF_EBTABLES is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-CONFIG_BRIDGE=m
-CONFIG_VLAN_8021Q=m
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
-CONFIG_IPX=m
-# CONFIG_IPX_INTERN is not set
-CONFIG_ATALK=m
-CONFIG_DEV_APPLETALK=y
-CONFIG_IPDDP=m
-CONFIG_IPDDP_ENCAP=y
-CONFIG_IPDDP_DECAP=y
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
-
-#
-# Network testing
-#
-CONFIG_NET_PKTGEN=m
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_SCO=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-# CONFIG_BT_HIDP is not set
-
-#
-# Bluetooth device drivers
-#
-CONFIG_BT_HCIUSB=m
-CONFIG_BT_HCIUSB_SCO=y
-# CONFIG_BT_HCIUART is not set
-CONFIG_BT_HCIBCM203X=m
-# CONFIG_BT_HCIBPA10X is not set
-# CONFIG_BT_HCIBFUSB is not set
-# CONFIG_BT_HCIVHCI is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-# CONFIG_MTD_CFI_NOSWAP is not set
-CONFIG_MTD_CFI_BE_BYTE_SWAP=y
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
-CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-CONFIG_MTD_IXP4XX=y
-# CONFIG_MTD_EDB7312 is not set
-# CONFIG_MTD_PCI is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=4
-CONFIG_BLK_DEV_RAM_SIZE=10240
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-CONFIG_IOSCHED_DEADLINE=y
-# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-CONFIG_DEFAULT_DEADLINE=y
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="deadline"
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=m
-# CONFIG_BLK_DEV_SR_VENDOR is not set
-CONFIG_CHR_DEV_SG=m
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-
-#
-# SCSI Transport Layers
-#
-# CONFIG_SAS_CLASS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA24XX is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-CONFIG_MD_RAID10=m
-CONFIG_MD_RAID5=m
-CONFIG_MD_RAID6=m
-CONFIG_MD_MULTIPATH=m
-CONFIG_MD_FAULTY=m
-CONFIG_BLK_DEV_DM=m
-# CONFIG_DM_CRYPT is not set
-# CONFIG_DM_SNAPSHOT is not set
-# CONFIG_DM_MIRROR is not set
-# CONFIG_DM_ZERO is not set
-# CONFIG_DM_MULTIPATH is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-CONFIG_TUN=m
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-CONFIG_NET_RADIO=y
-
-#
-# Obsolete Wireless cards support (pre-802.11)
-#
-# CONFIG_STRIP is not set
-
-#
-# Wireless 802.11b ISA/PCI cards support
-#
-# CONFIG_AIRO is not set
-# CONFIG_HERMES is not set
-# CONFIG_ATMEL is not set
-
-#
-# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
-#
-# CONFIG_PRISM54 is not set
-# CONFIG_HOSTAP is not set
-# CONFIG_ACX is not set
-CONFIG_NET_WIRELESS=y
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
-CONFIG_NETCONSOLE=m
-# CONFIG_KGDBOE is not set
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_RX is not set
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=m
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-CONFIG_INPUT_EVDEV=m
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=2
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=16
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_IXP4XX_WATCHDOG=y
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_RTC=m
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-
-#
-# I2C support
-#
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_IOP3XX is not set
-CONFIG_I2C_IXP4XX=y
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_SCx200_ACB is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-CONFIG_SENSORS_EEPROM=y
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-CONFIG_SENSORS_X1205=y
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# Hardware Monitoring support
-#
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia Capabilities Port drivers
-#
-
-#
-# Multimedia devices
-#
-CONFIG_VIDEO_DEV=m
-
-#
-# Video For Linux
-#
-
-#
-# Video Adapters
-#
-CONFIG_VIDEO_BT848=m
-# CONFIG_VIDEO_SAA6588 is not set
-CONFIG_VIDEO_CPIA=m
-CONFIG_VIDEO_CPIA_USB=m
-CONFIG_VIDEO_SAA5246A=m
-CONFIG_VIDEO_SAA5249=m
-CONFIG_TUNER_3036=m
-CONFIG_VIDEO_STRADIS=m
-CONFIG_VIDEO_ZORAN=m
-CONFIG_VIDEO_ZORAN_BUZ=m
-CONFIG_VIDEO_ZORAN_DC10=m
-CONFIG_VIDEO_ZORAN_DC30=m
-CONFIG_VIDEO_ZORAN_LML33=m
-CONFIG_VIDEO_ZORAN_LML33R10=m
-CONFIG_VIDEO_SAA7134=m
-CONFIG_VIDEO_MXB=m
-CONFIG_VIDEO_DPC=m
-CONFIG_VIDEO_HEXIUM_ORION=m
-CONFIG_VIDEO_HEXIUM_GEMINI=m
-CONFIG_VIDEO_CX88=m
-# CONFIG_VIDEO_EM28XX is not set
-CONFIG_VIDEO_OVCAMCHIP=m
-
-#
-# Radio Adapters
-#
-# CONFIG_RADIO_GEMTEK_PCI is not set
-# CONFIG_RADIO_MAXIRADIO is not set
-# CONFIG_RADIO_MAESTRO is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-CONFIG_VIDEO_SAA7146=m
-CONFIG_VIDEO_SAA7146_VV=m
-CONFIG_VIDEO_VIDEOBUF=m
-CONFIG_VIDEO_TUNER=m
-CONFIG_VIDEO_BUF=m
-CONFIG_VIDEO_BTCX=m
-CONFIG_VIDEO_IR=m
-CONFIG_VIDEO_TVEEPROM=m
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Speakup console speech
-#
-# CONFIG_SPEAKUP is not set
-
-#
-# Sound
-#
-CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
-CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-CONFIG_SND_HWDEP=m
-CONFIG_SND_RAWMIDI=m
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-# CONFIG_SND_RTCTIMER is not set
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# PCI devices
-#
-# CONFIG_SND_ALI5451 is not set
-# CONFIG_SND_ATIIXP is not set
-# CONFIG_SND_ATIIXP_MODEM is not set
-# CONFIG_SND_AU8810 is not set
-# CONFIG_SND_AU8820 is not set
-# CONFIG_SND_AU8830 is not set
-# CONFIG_SND_AZT3328 is not set
-# CONFIG_SND_BT87X is not set
-# CONFIG_SND_CS46XX is not set
-# CONFIG_SND_CS4281 is not set
-# CONFIG_SND_EMU10K1 is not set
-# CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_YMFPCI is not set
-# CONFIG_SND_AD1889 is not set
-# CONFIG_SND_ALS4000 is not set
-# CONFIG_SND_CMIPCI is not set
-# CONFIG_SND_ENS1370 is not set
-# CONFIG_SND_ENS1371 is not set
-# CONFIG_SND_ES1938 is not set
-# CONFIG_SND_ES1968 is not set
-# CONFIG_SND_MAESTRO3 is not set
-# CONFIG_SND_FM801 is not set
-# CONFIG_SND_ICE1712 is not set
-# CONFIG_SND_ICE1724 is not set
-# CONFIG_SND_INTEL8X0 is not set
-# CONFIG_SND_INTEL8X0M is not set
-# CONFIG_SND_SONICVIBES is not set
-# CONFIG_SND_VIA82XX is not set
-# CONFIG_SND_VIA82XX_MODEM is not set
-# CONFIG_SND_VX222 is not set
-# CONFIG_SND_HDA_INTEL is not set
-
-#
-# ALSA ARM devices
-#
-
-#
-# USB devices
-#
-CONFIG_SND_USB_AUDIO=m
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_SPLIT_ISO=y
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
-CONFIG_USB_ACM=m
-CONFIG_USB_PRINTER=m
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=m
-CONFIG_USB_HIDINPUT=y
-# CONFIG_HID_FF is not set
-CONFIG_USB_HIDDEV=y
-
-#
-# USB HID Boot Protocol drivers
-#
-CONFIG_USB_KBD=m
-# CONFIG_USB_MOUSE is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_MTOUCH is not set
-# CONFIG_USB_ITMTOUCH is not set
-# CONFIG_USB_EGALAX is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB Multimedia devices
-#
-# CONFIG_USB_DABUSB is not set
-# CONFIG_USB_VICAM is not set
-# CONFIG_USB_DSBR is not set
-# CONFIG_USB_IBMCAM is not set
-# CONFIG_USB_KONICAWC is not set
-# CONFIG_USB_OV511 is not set
-# CONFIG_USB_SE401 is not set
-# CONFIG_USB_SN9C102 is not set
-# CONFIG_USB_STV680 is not set
-# CONFIG_USB_W9968CF is not set
-CONFIG_USB_PWC=m
-
-#
-# USB Network Adapters
-#
-CONFIG_USB_CATC=m
-CONFIG_USB_KAWETH=m
-CONFIG_USB_PEGASUS=m
-CONFIG_USB_RTL8150=m
-CONFIG_USB_USBNET=m
-CONFIG_USB_NET_AX8817X=m
-CONFIG_USB_NET_CDCETHER=m
-# CONFIG_USB_NET_GL620A is not set
-CONFIG_USB_NET_NET1080=m
-# CONFIG_USB_NET_PLUSB is not set
-# CONFIG_USB_NET_RNDIS_HOST is not set
-# CONFIG_USB_NET_CDC_SUBSET is not set
-CONFIG_USB_NET_ZAURUS=m
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_USB_MON is not set
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-CONFIG_USB_SERIAL=m
-CONFIG_USB_SERIAL_GENERIC=y
-# CONFIG_USB_SERIAL_AIRPRIME is not set
-CONFIG_USB_SERIAL_BELKIN=m
-CONFIG_USB_SERIAL_WHITEHEAT=m
-CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
-# CONFIG_USB_SERIAL_CP2101 is not set
-CONFIG_USB_SERIAL_CYPRESS_M8=m
-CONFIG_USB_SERIAL_EMPEG=m
-CONFIG_USB_SERIAL_FTDI_SIO=m
-CONFIG_USB_SERIAL_VISOR=m
-CONFIG_USB_SERIAL_IPAQ=m
-CONFIG_USB_SERIAL_IR=m
-CONFIG_USB_SERIAL_EDGEPORT=m
-CONFIG_USB_SERIAL_EDGEPORT_TI=m
-CONFIG_USB_SERIAL_GARMIN=m
-CONFIG_USB_SERIAL_IPW=m
-CONFIG_USB_SERIAL_KEYSPAN_PDA=m
-# CONFIG_USB_SERIAL_KEYSPAN is not set
-CONFIG_USB_SERIAL_KLSI=m
-CONFIG_USB_SERIAL_KOBIL_SCT=m
-CONFIG_USB_SERIAL_MCT_U232=m
-# CONFIG_USB_SERIAL_NOKIA_DKU2 is not set
-CONFIG_USB_SERIAL_PL2303=m
-# CONFIG_USB_SERIAL_HP4X is not set
-CONFIG_USB_SERIAL_SAFE=m
-# CONFIG_USB_SERIAL_SAFE_PADDED is not set
-CONFIG_USB_SERIAL_TI=m
-CONFIG_USB_SERIAL_CYBERJACK=m
-CONFIG_USB_SERIAL_XIRCOM=m
-CONFIG_USB_SERIAL_OMNINET=m
-CONFIG_USB_EZUSB=y
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_GOTEMP is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=m
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=m
-CONFIG_EXT3_FS_XATTR=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-CONFIG_JBD=m
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=m
-# CONFIG_REISER4_FS is not set
-CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-CONFIG_REISERFS_FS_XATTR=y
-CONFIG_REISERFS_FS_POSIX_ACL=y
-CONFIG_REISERFS_FS_SECURITY=y
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-CONFIG_AUTOFS4_FS=m
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_ZISOFS_FS=m
-CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="utf8"
-CONFIG_NTFS_FS=m
-# CONFIG_NTFS_DEBUG is not set
-CONFIG_NTFS_RW=y
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_ASFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-CONFIG_NFS_V4=y
-CONFIG_NFS_DIRECTIO=y
-CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-CONFIG_SUNRPC_GSS=m
-CONFIG_RPCSEC_GSS_KRB5=m
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-CONFIG_CIFS_XATTR=y
-CONFIG_CIFS_POSIX=y
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="utf8"
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=m
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_DES=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_TEST=m
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6.14/.mtn2git_empty b/packages/obsolete/nslu2/nslu2-kernel/2.6.14/.mtn2git_empty
deleted file mode 100644
index e69de29bb2..0000000000
--- a/packages/obsolete/nslu2/nslu2-kernel/2.6.14/.mtn2git_empty
+++ /dev/null
diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6.14/10-ixp4xx-copy-from.patch b/packages/obsolete/nslu2/nslu2-kernel/2.6.14/10-ixp4xx-copy-from.patch
deleted file mode 100644
index f3da2e093f..0000000000
--- a/packages/obsolete/nslu2/nslu2-kernel/2.6.14/10-ixp4xx-copy-from.patch
+++ /dev/null
@@ -1,73 +0,0 @@
---- linux-2.6.14/drivers/mtd/maps/ixp4xx.c	2005-10-27 17:02:08.000000000 -0700
-+++ linux-2.6.14/drivers/mtd/maps/ixp4xx.c	2005-10-29 23:11:24.990820968 -0700
-@@ -38,10 +38,14 @@
- #define	BYTE1(h)	((h) & 0xFF)
- #endif
- 
-+#define FLASHWORD(a)	(*(__u16*)(a))
-+#define FLASHVAL(a)	FLASHWORD(a)
-+#define FLASHSET(a,v)	do { FLASHWORD(a) = (v); } while (0)
-+
- static map_word ixp4xx_read16(struct map_info *map, unsigned long ofs)
- {
- 	map_word val;
--	val.x[0] = *(__u16 *) (map->map_priv_1 + ofs);
-+	val.x[0] = FLASHVAL(map->map_priv_1 + ofs);
- 	return val;
- }
- 
-@@ -53,19 +57,25 @@ static map_word ixp4xx_read16(struct map
- static void ixp4xx_copy_from(struct map_info *map, void *to,
- 			     unsigned long from, ssize_t len)
- {
--	int i;
--	u8 *dest = (u8 *) to;
--	u16 *src = (u16 *) (map->map_priv_1 + from);
--	u16 data;
--
--	for (i = 0; i < (len / 2); i++) {
--		data = src[i];
--		dest[i * 2] = BYTE0(data);
--		dest[i * 2 + 1] = BYTE1(data);
-+	u8 *dest, *src;
-+
-+	if (len <= 0)
-+		return;
-+
-+	dest = (u8 *) to;
-+	src  = (u8 *) (map->map_priv_1 + from);
-+	if (from & 1)
-+		*dest++ = BYTE1(FLASHVAL(src-1)), ++src, --len;
-+
-+	while (len >= 2) {
-+		u16 data = FLASHVAL(src); src += 2;
-+		*dest++ = BYTE0(data);
-+		*dest++ = BYTE1(data);
-+		len -= 2;
- 	}
- 
--	if (len & 1)
--		dest[len - 1] = BYTE0(src[i]);
-+	if (len > 0)
-+		*dest++ = BYTE0(FLASHVAL(src));
- }
- 
- /* 
-@@ -75,7 +85,7 @@ static void ixp4xx_copy_from(struct map_
- static void ixp4xx_probe_write16(struct map_info *map, map_word d, unsigned long adr)
- {
- 	if (!(adr & 1))
--	       *(__u16 *) (map->map_priv_1 + adr) = d.x[0];
-+	       FLASHSET(map->map_priv_1 + adr, d.x[0]);
- }
- 
- /* 
-@@ -83,7 +93,7 @@ static void ixp4xx_probe_write16(struct 
-  */
- static void ixp4xx_write16(struct map_info *map, map_word d, unsigned long adr)
- {
--       *(__u16 *) (map->map_priv_1 + adr) = d.x[0];
-+       FLASHSET(map->map_priv_1 + adr, d.x[0]);
- }
- 
- struct ixp4xx_flash_info {
diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6.14/10-ixp4xx-le.patch b/packages/obsolete/nslu2/nslu2-kernel/2.6.14/10-ixp4xx-le.patch
deleted file mode 100644
index 0b50e4e1a0..0000000000
--- a/packages/obsolete/nslu2/nslu2-kernel/2.6.14/10-ixp4xx-le.patch
+++ /dev/null
@@ -1,54 +0,0 @@
---- linux-2.6.14/drivers/mtd/maps/ixp4xx.c	2005-10-27 17:02:08.000000000 -0700
-+++ linux-2.6.14/drivers/mtd/maps/ixp4xx.c	2005-10-29 23:11:24.990820968 -0700
-@@ -22,6 +22,7 @@
- #include <linux/string.h>
- #include <linux/mtd/mtd.h>
- #include <linux/mtd/map.h>
-+#include <linux/mtd/cfi_endian.h>
- #include <linux/mtd/partitions.h>
- #include <linux/ioport.h>
- #include <linux/device.h>
-@@ -30,17 +31,40 @@
- 
- #include <linux/reboot.h>
- 
-+/* On a little-endian IXP4XX system (tested on NSLU2) an LDRH or STRH
-+ * will flip the second address bit - i.e. XOR the address with 10b.
-+ * This causes the cfi commands (sent to the command address, 0xAA for
-+ * 16 bit flash) to fail.  This is fixed here by XOR'ing the address
-+ * before use with 10b.  The cost of this is that the flash layout ends
-+ * up with pdp-endiannes (on an LE system), however this is not a problem
-+ * as the access code consistently only accesses half words - so the
-+ * endianness is not determinable on stuff which is written and read
-+ * consistently in the little endian world.
-+ *
-+ * For flash data from the big-endian world, however, the results are
-+ * weird - the pdp-endianness results in the data apparently being
-+ * 2-byte swapped (as in dd conv=swab).  To work round this the 16
-+ * bit values are written and read using cpu_to_cfi16 and cfi16_to_cpu,
-+ * by default these are no-ops, but if the MTD driver is configed with
-+ * CONFIG_MTD_CFI_BE_BYTE_SWAP the macros will byte swap the data,
-+ * resulting in a consistently BE view of the flash on both BE (no
-+ * op) and LE systems.  This config setting also causes the command
-+ * data from the CFI implementation to get swapped - as is required
-+ * so that this code will *unswap* it and give the correct command
-+ * data to the flash.
-+ */
- #ifndef __ARMEB__
- #define	BYTE0(h)	((h) & 0xFF)
- #define	BYTE1(h)	(((h) >> 8) & 0xFF)
-+#define	FLASHWORD(a)	(*(__u16*)((u32)(a) ^ 2))
- #else
- #define	BYTE0(h)	(((h) >> 8) & 0xFF)
- #define	BYTE1(h)	((h) & 0xFF)
-+#define	FLASHWORD(a)	(*(__u16*)(a))
- #endif
- 
--#define FLASHWORD(a)	(*(__u16*)(a))
--#define FLASHVAL(a)	FLASHWORD(a)
--#define FLASHSET(a,v)	do { FLASHWORD(a) = (v); } while (0)
-+#define FLASHVAL(a)	cfi16_to_cpu(FLASHWORD(a))
-+#define FLASHSET(a,v)	(FLASHWORD(a) = cpu_to_cfi16(v))
- 
- static map_word ixp4xx_read16(struct map_info *map, unsigned long ofs)
- {
diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6.14/10-mtdpart-redboot-fis-byteswap.patch b/packages/obsolete/nslu2/nslu2-kernel/2.6.14/10-mtdpart-redboot-fis-byteswap.patch
deleted file mode 100644
index 3fa0535abf..0000000000
--- a/packages/obsolete/nslu2/nslu2-kernel/2.6.14/10-mtdpart-redboot-fis-byteswap.patch
+++ /dev/null
@@ -1,70 +0,0 @@
-drivers/mtd/redboot.c: recognise a foreign byte sex partition table
-
-The RedBoot boot loader writes flash partition tables containing native
-byte sex 32 bit values.  When booting an opposite byte sex kernel (e.g.  an
-LE kernel from BE RedBoot) the current MTD driver fails to handle the
-partition table and therefore is unable to generate the correct partition
-map for the flash.
-
-The patch recognises that the FIS directory (the partition table) is
-byte-reversed by examining the partition table size, which is known to be
-one erase block (this is an assumption made elsewhere in redboot.c).  If
-the size matches the erase block after byte swapping the value then
-byte-reversal is assumed, if not no further action is taken.  The patched
-code is fail safe; should redboot.c be changed to support a partition table
-with a modified size field the test will fail and the partition table will
-be assumed to have the host byte sex.
-
-If byte-reversal is detected the patch byte swaps the remainder of the 32
-bit fields in the copy of the table; this copy is then used to set up the
-MTD partition map.
-
-Signed-off-by: John Bowler <jbowler@acm.org>
-Signed-off-by: Andrew Morton <akpm@osdl.org>
-Modified slightly and
-Signed-off-by: David Woodhouse <dwmw2@infradead.org>
-
-Index: drivers/mtd/redboot.c
-===================================================================
-RCS file: /home/cvs/mtd/drivers/mtd/redboot.c,v
-retrieving revision 1.18
-retrieving revision 1.19
-diff -u -p -r1.18 -r1.19
---- linux-2.6.15/drivers/mtd/redboot.c	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.15/drivers/mtd/redboot.c	1970-01-01 00:00:00.000000000 +0000
-@@ -89,8 +89,32 @@ static int parse_redboot_partitions(stru
- 			i = numslots;
- 			break;
- 		}
--		if (!memcmp(buf[i].name, "FIS directory", 14))
-+		if (!memcmp(buf[i].name, "FIS directory", 14)) {
-+			/* This is apparently the FIS directory entry for the
-+			 * FIS directory itself.  The FIS directory size is
-+			 * one erase block; if the buf[i].size field is
-+			 * swab32(erasesize) then we know we are looking at
-+			 * a byte swapped FIS directory - swap all the entries!
-+			 * (NOTE: this is 'size' not 'data_length'; size is
-+			 * the full size of the entry.)
-+			 */
-+			if (swab32(buf[i].size) == master->erasesize) {
-+				int j;
-+				for (j = 0; j < numslots && buf[j].name[0] != 0xff; ++j) {
-+					/* The unsigned long fields were written with the
-+					 * wrong byte sex, name and pad have no byte sex.
-+					 */
-+					swab32s(&buf[j].flash_base);
-+					swab32s(&buf[j].mem_base);
-+					swab32s(&buf[j].size);
-+					swab32s(&buf[j].entry_point);
-+					swab32s(&buf[j].data_length);
-+					swab32s(&buf[j].desc_cksum);
-+					swab32s(&buf[j].file_cksum);
-+				}
-+			}
- 			break;
-+		}
- 	}
- 	if (i == numslots) {
- 		/* Didn't find it */
-
-
diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6.14/15-ixp4xx-writesb-l-w.patch b/packages/obsolete/nslu2/nslu2-kernel/2.6.14/15-ixp4xx-writesb-l-w.patch
deleted file mode 100644
index 6ac0807f1e..0000000000
--- a/packages/obsolete/nslu2/nslu2-kernel/2.6.14/15-ixp4xx-writesb-l-w.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-# The inline caller of these APIs were changed to have
-# const vaddr parameters...
---- linux-2.6.13/include/asm-arm/arch-ixp4xx/io.h.orig	2005-09-24 17:06:19.968099976 -0700
-+++ linux-2.6.13/include/asm-arm/arch-ixp4xx/io.h	2005-09-24 17:06:52.542149731 -0700
-@@ -113,7 +113,7 @@
- }
- 
- static inline void
--__ixp4xx_writesb(u32 bus_addr, u8 *vaddr, int count)
-+__ixp4xx_writesb(u32 bus_addr, const u8 *vaddr, int count)
- {
- 	while (count--)
- 		writeb(*vaddr++, bus_addr);
-@@ -136,7 +136,7 @@
- }
- 
- static inline void
--__ixp4xx_writesw(u32 bus_addr, u16 *vaddr, int count)
-+__ixp4xx_writesw(u32 bus_addr, const u16 *vaddr, int count)
- {
- 	while (count--)
- 		writew(*vaddr++, bus_addr);
-@@ -154,7 +154,7 @@
- }
- 
- static inline void
--__ixp4xx_writesl(u32 bus_addr, u32 *vaddr, int count)
-+__ixp4xx_writesl(u32 bus_addr, const u32 *vaddr, int count)
- {
- 	while (count--)
- 		writel(*vaddr++, bus_addr);
diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6.14/18-ixp4xx-io-h-addr.patch b/packages/obsolete/nslu2/nslu2-kernel/2.6.14/18-ixp4xx-io-h-addr.patch
deleted file mode 100644
index 5813bbb7ac..0000000000
--- a/packages/obsolete/nslu2/nslu2-kernel/2.6.14/18-ixp4xx-io-h-addr.patch
+++ /dev/null
@@ -1,287 +0,0 @@
---- linux-2.6.14/include/asm-arm/arch-ixp4xx/io.h	2005-10-29 23:33:21.757679882 -0700
-+++ linux-2.6.14/include/asm-arm/arch-ixp4xx/io.h	2005-10-29 23:47:02.581331058 -0700
-@@ -80,9 +80,9 @@ __ixp4xx_iounmap(void __iomem *addr)
- #define __arch_ioremap(a, s, f, x)	__ixp4xx_ioremap(a, s, f, x)
- #define	__arch_iounmap(a)		__ixp4xx_iounmap(a)
- 
--#define	writeb(p, v)			__ixp4xx_writeb(p, v)
--#define	writew(p, v)			__ixp4xx_writew(p, v)
--#define	writel(p, v)			__ixp4xx_writel(p, v)
-+#define	writeb(v, p)			__ixp4xx_writeb(v, p)
-+#define	writew(v, p)			__ixp4xx_writew(v, p)
-+#define	writel(v, p)			__ixp4xx_writel(v, p)
- 
- #define	writesb(p, v, l)		__ixp4xx_writesb(p, v, l)
- #define	writesw(p, v, l)		__ixp4xx_writesw(p, v, l)
-@@ -97,8 +97,9 @@ __ixp4xx_iounmap(void __iomem *addr)
- #define	readsl(p, v, l)			__ixp4xx_readsl(p, v, l)
- 
- static inline void 
--__ixp4xx_writeb(u8 value, u32 addr)
-+__ixp4xx_writeb(u8 value, volatile void __iomem *p)
- {
-+	u32 addr = (u32)p;
- 	u32 n, byte_enables, data;
- 
- 	if (addr >= VMALLOC_START) {
-@@ -113,15 +114,16 @@ __ixp4xx_writeb(u8 value, u32 addr)
- }
- 
- static inline void
--__ixp4xx_writesb(u32 bus_addr, const u8 *vaddr, int count)
-+__ixp4xx_writesb(volatile void __iomem *bus_addr, const u8 *vaddr, int count)
- {
- 	while (count--)
- 		writeb(*vaddr++, bus_addr);
- }
- 
- static inline void 
--__ixp4xx_writew(u16 value, u32 addr)
-+__ixp4xx_writew(u16 value, volatile void __iomem *p)
- {
-+	u32 addr = (u32)p;
- 	u32 n, byte_enables, data;
- 
- 	if (addr >= VMALLOC_START) {
-@@ -136,15 +138,16 @@ __ixp4xx_writew(u16 value, u32 addr)
- }
- 
- static inline void
--__ixp4xx_writesw(u32 bus_addr, const u16 *vaddr, int count)
-+__ixp4xx_writesw(volatile void __iomem *bus_addr, const u16 *vaddr, int count)
- {
- 	while (count--)
- 		writew(*vaddr++, bus_addr);
- }
- 
- static inline void 
--__ixp4xx_writel(u32 value, u32 addr)
-+__ixp4xx_writel(u32 value, volatile void __iomem *p)
- {
-+	u32 addr = (u32)p;
- 	if (addr >= VMALLOC_START) {
- 		__raw_writel(value, addr);
- 		return;
-@@ -154,15 +157,16 @@ __ixp4xx_writel(u32 value, u32 addr)
- }
- 
- static inline void
--__ixp4xx_writesl(u32 bus_addr, const u32 *vaddr, int count)
-+__ixp4xx_writesl(volatile void __iomem *bus_addr, const u32 *vaddr, int count)
- {
- 	while (count--)
- 		writel(*vaddr++, bus_addr);
- }
- 
- static inline unsigned char 
--__ixp4xx_readb(u32 addr)
-+__ixp4xx_readb(const volatile void __iomem *p)
- {
-+	u32 addr = (u32)p;
- 	u32 n, byte_enables, data;
- 
- 	if (addr >= VMALLOC_START)
-@@ -177,15 +181,16 @@ __ixp4xx_readb(u32 addr)
- }
- 
- static inline void
--__ixp4xx_readsb(u32 bus_addr, u8 *vaddr, u32 count)
-+__ixp4xx_readsb(const volatile void __iomem *bus_addr, u8 *vaddr, u32 count)
- {
- 	while (count--)
- 		*vaddr++ = readb(bus_addr);
- }
- 
- static inline unsigned short 
--__ixp4xx_readw(u32 addr)
-+__ixp4xx_readw(const volatile void __iomem *p)
- {
-+	u32 addr = (u32)p;
- 	u32 n, byte_enables, data;
- 
- 	if (addr >= VMALLOC_START)
-@@ -200,15 +205,16 @@ __ixp4xx_readw(u32 addr)
- }
- 
- static inline void 
--__ixp4xx_readsw(u32 bus_addr, u16 *vaddr, u32 count)
-+__ixp4xx_readsw(const volatile void __iomem *bus_addr, u16 *vaddr, u32 count)
- {
- 	while (count--)
- 		*vaddr++ = readw(bus_addr);
- }
- 
- static inline unsigned long 
--__ixp4xx_readl(u32 addr)
-+__ixp4xx_readl(const volatile void __iomem *p)
- {
-+	u32 addr = (u32)p;
- 	u32 data;
- 
- 	if (addr >= VMALLOC_START)
-@@ -221,7 +227,7 @@ __ixp4xx_readl(u32 addr)
- }
- 
- static inline void 
--__ixp4xx_readsl(u32 bus_addr, u32 *vaddr, u32 count)
-+__ixp4xx_readsl(const volatile void __iomem *bus_addr, u32 *vaddr, u32 count)
- {
- 	while (count--)
- 		*vaddr++ = readl(bus_addr);
-@@ -239,7 +245,7 @@ __ixp4xx_readsl(u32 bus_addr, u32 *vaddr
- 				eth_copy_and_sum((s),__mem_pci(c),(l),(b))
- 
- static inline int
--check_signature(unsigned long bus_addr, const unsigned char *signature,
-+check_signature(const unsigned char __iomem *bus_addr, const unsigned char *signature,
- 		int length)
- {
- 	int retval = 0;
-@@ -389,7 +395,7 @@ __ixp4xx_insl(u32 io_addr, u32 *vaddr, u
- #define	__is_io_address(p)	(((unsigned long)p >= PIO_OFFSET) && \
- 					((unsigned long)p <= (PIO_MASK + PIO_OFFSET)))
- static inline unsigned int
--__ixp4xx_ioread8(void __iomem *addr)
-+__ixp4xx_ioread8(const void __iomem *addr)
- {
- 	unsigned long port = (unsigned long __force)addr;
- 	if (__is_io_address(port))
-@@ -398,12 +404,12 @@ __ixp4xx_ioread8(void __iomem *addr)
- #ifndef CONFIG_IXP4XX_INDIRECT_PCI
- 		return (unsigned int)__raw_readb(port);
- #else
--		return (unsigned int)__ixp4xx_readb(port);
-+		return (unsigned int)__ixp4xx_readb(addr);
- #endif
- }
- 
- static inline void
--__ixp4xx_ioread8_rep(void __iomem *addr, void *vaddr, u32 count)
-+__ixp4xx_ioread8_rep(const void __iomem *addr, void *vaddr, u32 count)
- {
- 	unsigned long port = (unsigned long __force)addr;
- 	if (__is_io_address(port))
-@@ -412,12 +418,12 @@ __ixp4xx_ioread8_rep(void __iomem *addr,
- #ifndef	CONFIG_IXP4XX_INDIRECT_PCI
- 		__raw_readsb(addr, vaddr, count);
- #else
--		__ixp4xx_readsb(port, vaddr, count);
-+		__ixp4xx_readsb(addr, vaddr, count);
- #endif
- }
- 
- static inline unsigned int
--__ixp4xx_ioread16(void __iomem *addr)
-+__ixp4xx_ioread16(const void __iomem *addr)
- {
- 	unsigned long port = (unsigned long __force)addr;
- 	if (__is_io_address(port))
-@@ -426,12 +432,12 @@ __ixp4xx_ioread16(void __iomem *addr)
- #ifndef CONFIG_IXP4XX_INDIRECT_PCI
- 		return le16_to_cpu(__raw_readw((u32)port));
- #else
--		return (unsigned int)__ixp4xx_readw((u32)port);
-+		return (unsigned int)__ixp4xx_readw(addr);
- #endif
- }
- 
- static inline void
--__ixp4xx_ioread16_rep(void __iomem *addr, void *vaddr, u32 count)
-+__ixp4xx_ioread16_rep(const void __iomem *addr, void *vaddr, u32 count)
- {
- 	unsigned long port = (unsigned long __force)addr;
- 	if (__is_io_address(port))
-@@ -440,12 +446,12 @@ __ixp4xx_ioread16_rep(void __iomem *addr
- #ifndef	CONFIG_IXP4XX_INDIRECT_PCI
- 		__raw_readsw(addr, vaddr, count);
- #else
--		__ixp4xx_readsw(port, vaddr, count);
-+		__ixp4xx_readsw(addr, vaddr, count);
- #endif
- }
- 
- static inline unsigned int
--__ixp4xx_ioread32(void __iomem *addr)
-+__ixp4xx_ioread32(const void __iomem *addr)
- {
- 	unsigned long port = (unsigned long __force)addr;
- 	if (__is_io_address(port))
-@@ -454,13 +460,13 @@ __ixp4xx_ioread32(void __iomem *addr)
- #ifndef CONFIG_IXP4XX_INDIRECT_PCI
- 		return le32_to_cpu(__raw_readl((u32)port));
- #else
--		return (unsigned int)__ixp4xx_readl((u32)port);
-+		return (unsigned int)__ixp4xx_readl(addr);
- #endif
- 	}
- }
- 
- static inline void
--__ixp4xx_ioread32_rep(void __iomem *addr, void *vaddr, u32 count)
-+__ixp4xx_ioread32_rep(const void __iomem *addr, void *vaddr, u32 count)
- {
- 	unsigned long port = (unsigned long __force)addr;
- 	if (__is_io_address(port))
-@@ -469,7 +475,7 @@ __ixp4xx_ioread32_rep(void __iomem *addr
- #ifndef	CONFIG_IXP4XX_INDIRECT_PCI
- 		__raw_readsl(addr, vaddr, count);
- #else
--		__ixp4xx_readsl(port, vaddr, count);
-+		__ixp4xx_readsl(addr, vaddr, count);
- #endif
- }
- 
-@@ -483,7 +489,7 @@ __ixp4xx_iowrite8(u8 value, void __iomem
- #ifndef CONFIG_IXP4XX_INDIRECT_PCI
- 		__raw_writeb(value, port);
- #else
--		__ixp4xx_writeb(value, port);
-+		__ixp4xx_writeb(value, addr);
- #endif
- }
- 
-@@ -497,7 +503,7 @@ __ixp4xx_iowrite8_rep(void __iomem *addr
- #ifndef CONFIG_IXP4XX_INDIRECT_PCI
- 		__raw_writesb(addr, vaddr, count);
- #else
--		__ixp4xx_writesb(port, vaddr, count);
-+		__ixp4xx_writesb(addr, vaddr, count);
- #endif
- }
- 
-@@ -511,7 +517,7 @@ __ixp4xx_iowrite16(u16 value, void __iom
- #ifndef CONFIG_IXP4XX_INDIRECT_PCI
- 		__raw_writew(cpu_to_le16(value), addr);
- #else
--		__ixp4xx_writew(value, port);
-+		__ixp4xx_writew(value, addr);
- #endif
- }
- 
-@@ -525,7 +531,7 @@ __ixp4xx_iowrite16_rep(void __iomem *add
- #ifndef CONFIG_IXP4XX_INDIRECT_PCI
- 		__raw_writesw(addr, vaddr, count);
- #else
--		__ixp4xx_writesw(port, vaddr, count);
-+		__ixp4xx_writesw(addr, vaddr, count);
- #endif
- }
- 
-@@ -539,7 +545,7 @@ __ixp4xx_iowrite32(u32 value, void __iom
- #ifndef CONFIG_IXP4XX_INDIRECT_PCI
- 		__raw_writel(cpu_to_le32(value), port);
- #else
--		__ixp4xx_writel(value, port);
-+		__ixp4xx_writel(value, addr);
- #endif
- }
- 
-@@ -553,7 +559,7 @@ __ixp4xx_iowrite32_rep(void __iomem *add
- #ifndef CONFIG_IXP4XX_INDIRECT_PCI
- 		__raw_writesl(addr, vaddr, count);
- #else
--		__ixp4xx_writesl(port, vaddr, count);
-+		__ixp4xx_writesl(addr, vaddr, count);
- #endif
- }
- 
diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6.14/19-jffs2-force-be.patch b/packages/obsolete/nslu2/nslu2-kernel/2.6.14/19-jffs2-force-be.patch
deleted file mode 100644
index 4406d17857..0000000000
--- a/packages/obsolete/nslu2/nslu2-kernel/2.6.14/19-jffs2-force-be.patch
+++ /dev/null
@@ -1,13 +0,0 @@
---- linux-2.6.14.1/fs/jffs2/nodelist.h.orig	2005-11-09 23:12:29.641449728 -0800
-+++ linux-2.6.14.1/fs/jffs2/nodelist.h	2005-11-09 23:13:19.228570049 -0800
-@@ -44,7 +44,9 @@
- #define D2(x)
- #endif
- 
--#define JFFS2_NATIVE_ENDIAN
-+#undef JFFS2_NATIVE_ENDIAN
-+#define JFFS2_BIG_ENDIAN 1
-+#undef JFFS2_LITTLE_ENDIAN
- 
- /* Note we handle mode bits conversion from JFFS2 (i.e. Linux) to/from
-    whatever OS we're actually running on here too. */
diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6.14/20-timer.patch b/packages/obsolete/nslu2/nslu2-kernel/2.6.14/20-timer.patch
deleted file mode 100644
index 3d4a03f616..0000000000
--- a/packages/obsolete/nslu2/nslu2-kernel/2.6.14/20-timer.patch
+++ /dev/null
@@ -1,285 +0,0 @@
---- linux-2.6.15/arch/arm/mach-ixp4xx/common.c	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.15/arch/arm/mach-ixp4xx/common.c	1970-01-01 00:00:00.000000000 +0000
-@@ -239,36 +239,165 @@ void __init ixp4xx_init_irq(void)
-  * IXP4xx timer tick
-  * We use OS timer1 on the CPU for the timer tick and the timestamp 
-  * counter as a source of real clock ticks to account for missed jiffies.
-+ *
-+ * 'CLOCK_TICK_RATE' is the nominal number of internal ticks per second,
-+ * this is significantly greater than the actual number on any ixp4xx
-+ * board.  Neither this nor 'LATCH' are required by this code because
-+ * the only requirement is to generate HZ timer_tick calls per second.
-  *************************************************************************/
-+#if TICK_NSEC * HZ != 1000000000
-+	/* This will cause the jiffies to drift unnecessarily. */
-+#	error CLOCK_TICK_RATE should be a multiple of HZ for this code
-+#endif
-+
-+/* These are the control registers for the interrupt handler, they must
-+ * only be read and written by the interrupt handler and by the init
-+ * method (which sets them to 0).
-+ */
-+static volatile u32 last_timer_time;
-+static volatile int accumulated_error;
-+
-+/* Most ixp4xx boards have 66.6666MHz crystals, so default to this, reset
-+ * this from the board level code if required.  The following variables
-+ * must be *written* only by set_board_tick_rate
-+ */
-+static u32 board_tick_rate;
-+static u32 board_tick_per_1000; /* board_tick_rate/1000 */
-+static u32 timer_count;
-+
-+/* The following symbol may be written to change the current tick rate,
-+ * it is read by the interrupt handler and used to reload the timer.
-+ * The 'real' value (the one in use) is 'board_tick_rate' above.
-+ * NOTE: this can be tweaked to match the actual crystal on a particular
-+ * machine.
-+ */
-+volatile u32 ixp4xx_board_tick_rate = 66666600;
-+EXPORT_SYMBOL(ixp4xx_board_tick_rate);
-+
-+/* The set API may run asynchronously in the presence of interrupts,
-+ * everything it does it is both atomic and complete (notice that it
-+ * doesn't change any of the 'volatile' values).  The mathematics in
-+ * here require the following values.  Changing the board tick rate
-+ * implies an unknown error in the current timestamp tick count.
-+ */
-+#if IXP4XX_OST_RELOAD_MASK != 3 || IXP4XX_OST_ENABLE != 1
-+#	error unexpected value for timer reload mask
-+#endif
-+static void set_board_tick_rate(u32 rate) {
-+	u32 reload;
-+
-+	/* Store the two effectively informational rate values, the
-+	 * error calculation is (rate - count*HZ) (above), and rate
-+	 * is changed first, this can cause a temporary error which
-+	 * will be corrected on the next interrupt.
-+	 */
-+	board_tick_rate = rate;
-+	board_tick_per_1000 = (rate+500)/1000;
-+
-+	/* Calculate the correct value to load into the timer countdown
-+	 * register, the low two bits must be b01 (to enable the timer).
-+	 * Select the top bits to be as close to the desired value as
-+	 * possible.
-+	 *
-+	 * First find the best value, regardless of the low two bits -
-+	 * this is the value used in the interrupt calculation even though
-+	 * it cannot necessarily be set into the register.
-+	 */
-+	timer_count = (rate + (HZ/2))/HZ;
-+
-+	/* Now the timer_ticks are being generated at this rate, calculate
-+	 * an appropriate value for the register.  This stores a 30 bit
-+	 * value which gives a period of 4*x+1, we want:
-+	 *
-+	 *   4*x+1 = board_tick_rate/HZ
-+	 *
-+	 * This needs to be rounded to the closest 4*HZ value:
-+	 * 
-+	 *   x = ((board_tick_rate-HZ) + (4*HZ)/2) / 4*HZ
-+	 *   x = (board_tick_rate+HZ) / (4*HZ);
-+	 */
-+	reload = (board_tick_rate + HZ) / HZ;
-+	reload = (reload & ~IXP4XX_OST_RELOAD_MASK) | IXP4XX_OST_ENABLE;
-+	*IXP4XX_OSRT1 = reload;
- 
--static unsigned volatile last_jiffy_time;
-+	/* If the clock is drifing, look in syslog: */
-+	printk(KERN_INFO "IXP4xx: FREQ=%d COUNT=%d\n", rate, reload);
-+}
- 
--#define CLOCK_TICKS_PER_USEC	((CLOCK_TICK_RATE + USEC_PER_SEC/2) / USEC_PER_SEC)
-+/* This returns the time in timer ticks since the 'last_timer_time'
-+ * recorded above.  Use this to avoid arithmetic errors because of
-+ * the overflow when the timer wraps.
-+ */
-+static inline u32 ixp4xx_timer_delta(void)
-+{
-+	return *IXP4XX_OSTS - last_timer_time;
-+}
- 
- /* IRQs are disabled before entering here from do_gettimeofday() */
- static unsigned long ixp4xx_gettimeoffset(void)
- {
--	u32 elapsed;
--
--	elapsed = *IXP4XX_OSTS - last_jiffy_time;
-+	/* Return the offset of the current time from the last time
-+	 * timer tick in microseconds.  This is only used for the
-+	 * gettimeofday call.
-+	 *
-+	 * The result of this API is at most about 20000 (for a 50Hz
-+	 * HZ - 20000 uS/tick), the input delta is at most about
-+	 * 1.3M - 21 bits.
-+	 */
-+	u32 delta = ixp4xx_timer_delta(); /* About 21 bits max */
-+	/* return delta * 1000000 / board_tick_rate; */
-+	return (delta * 1000 + board_tick_per_1000/2) / board_tick_per_1000;
-+}
- 
--	return elapsed / CLOCK_TICKS_PER_USEC;
-+/* This is the correct adjustment to the counter to compensate for an
-+ * error iff timer_count-1 <= exact_count <= timer_count+1
-+ */
-+static inline int adjustment(int error) {
-+	if (error >= HZ)
-+		return 1;
-+	else if (error <= -HZ)
-+		return -1;
-+	return 0;
- }
- 
- static irqreturn_t ixp4xx_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
- {
-+	u32 rate;
-+	u32 count;
-+	int error;
-+
- 	write_seqlock(&xtime_lock);
- 
- 	/* Clear Pending Interrupt by writing '1' to it */
- 	*IXP4XX_OSST = IXP4XX_OSST_TIMER_1_PEND;
- 
-+	/* If the board tick rate has been changed update the cached
-+	 * value.
-+	 */
-+	if (ixp4xx_board_tick_rate != board_tick_rate) {
-+		set_board_tick_rate(ixp4xx_board_tick_rate);
-+		accumulated_error = 0;
-+	}
-+
- 	/*
- 	 * Catch up with the real idea of time
-+	 *
-+	 * board_tick_rate: actual ixp4xx ticks/second, read-only
-+	 * accumulated_error: aggregate error/tick * HZ, read/write
-+	 * timer_count: best ixp4xx ticks per timer_tick, read-only
- 	 */
--	while ((*IXP4XX_OSTS - last_jiffy_time) > LATCH) {
-+	rate = board_tick_rate;
-+	error = accumulated_error;
-+	count = timer_count;
-+	do {
-+		u32 adjusted_count = count + adjustment(error);
-+		if (ixp4xx_timer_delta() < adjusted_count)
-+			break;
- 		timer_tick(regs);
--		last_jiffy_time += LATCH;
--	}
-+		last_timer_time += adjusted_count;
-+		error += rate - adjusted_count*HZ;
-+	} while (1);
-+	accumulated_error = error;
- 
- 	write_sequnlock(&xtime_lock);
- 
-@@ -281,17 +410,30 @@ static struct irqaction ixp4xx_timer_irq
- 	.handler	= ixp4xx_timer_interrupt,
- };
- 
-+u32 ixp4xx_get_board_tick_rate(void) {
-+	return board_tick_rate;
-+}
-+
-+EXPORT_SYMBOL(ixp4xx_get_board_tick_rate);
-+
-+void ixp4xx_set_board_tick_rate(u32 rate) {
-+	ixp4xx_board_tick_rate = rate;
-+}
-+
-+EXPORT_SYMBOL(ixp4xx_set_board_tick_rate);
-+
- static void __init ixp4xx_timer_init(void)
- {
- 	/* Clear Pending Interrupt by writing '1' to it */
- 	*IXP4XX_OSST = IXP4XX_OSST_TIMER_1_PEND;
- 
- 	/* Setup the Timer counter value */
--	*IXP4XX_OSRT1 = (LATCH & ~IXP4XX_OST_RELOAD_MASK) | IXP4XX_OST_ENABLE;
-+	set_board_tick_rate(ixp4xx_board_tick_rate);
- 
- 	/* Reset time-stamp counter */
- 	*IXP4XX_OSTS = 0;
--	last_jiffy_time = 0;
-+	last_timer_time = 0;
-+	accumulated_error = 0;
- 
- 	/* Connect the interrupt handler and enable the interrupt */
- 	setup_irq(IRQ_IXP4XX_TIMER1, &ixp4xx_timer_irq);
-@@ -337,4 +479,3 @@ void __init ixp4xx_sys_init(void)
- 				ARRAY_SIZE(ixp46x_devices));
- 	}
- }
--
---- linux-2.6.15/arch/arm/mach-ixp4xx/nslu2-setup.c	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.15/arch/arm/mach-ixp4xx/nslu2-setup.c	1970-01-01 00:00:00.000000000 +0000
-@@ -119,6 +119,11 @@ static void nslu2_power_off(void)
- 
- static void __init nslu2_init(void)
- {
-+	/* The NSLU2 has a 33MHz crystal on board - 1.01% different
-+	 * from the typical value.
-+	 */
-+	ixp4xx_set_board_tick_rate(66000000);
-+
- 	ixp4xx_sys_init();
- 
- 	pm_power_off = nslu2_power_off;
---- linux-2.6.15/drivers/input/misc/nslu2spkr.c	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.15/drivers/input/misc/nslu2spkr.c	1970-01-01 00:00:00.000000000 +0000
-@@ -51,7 +51,7 @@ static int nslu2_spkr_event(struct input
- 	}
- 
- 	if (value > 20 && value < 32767)
--		count = (NSLU2_FREQ / (value*4)) - 1;
-+		count = (ixp4xx_get_board_tick_rate() / (value*4)) - 1;
- 
- 	spin_lock_irqsave(&beep_lock, flags);
- 
---- linux-2.6.15/include/asm-arm/arch-ixp4xx/nslu2.h	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.15/include/asm-arm/arch-ixp4xx/nslu2.h	1970-01-01 00:00:00.000000000 +0000
-@@ -38,11 +38,6 @@
- #define NSLU2_PCI_INTD_PIN	8
- 
- 
--/* NSLU2 Timer */
--#define NSLU2_FREQ 66000000
--#define NSLU2_CLOCK_TICK_RATE (((NSLU2_FREQ / HZ & ~IXP4XX_OST_RELOAD_MASK) + 1) * HZ)
--#define NSLU2_CLOCK_TICKS_PER_USEC ((NSLU2_CLOCK_TICK_RATE + USEC_PER_SEC/2) / USEC_PER_SEC)
--
- /* GPIO */
- 
- #define NSLU2_GPIO0		0
---- linux-2.6.15/include/asm-arm/arch-ixp4xx/timex.h	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.15/include/asm-arm/arch-ixp4xx/timex.h	1970-01-01 00:00:00.000000000 +0000
-@@ -6,10 +6,23 @@
- #include <asm/hardware.h>
- 
- /*
-- * We use IXP425 General purpose timer for our timer needs, it runs at 
-- * 66.66... MHz. We do a convulted calculation of CLOCK_TICK_RATE b/c the
-- * timer register ignores the bottom 2 bits of the LATCH value.
-+ * In linux/timex.h 'LATCH' is defined as CLOCK_TICK_RATE/HZ and
-+ * is the number of internal counts per timer interrupt.  Thus
-+ * CLOCK_TICK_RATE is LATCH*HZ.
-+ *
-+ * The actual values of these numbers do not matter, because they
-+ * are only used to calculate ACTHZ (rate/latch as a 24.8 fixed
-+ * point number), so the value here gives a LATCH of 1 and pretty
-+ * much guarantees to flush out any off-by-one errors.
-+ *
-+ * ACTHZ is equal to HZ, because CLOCK_TICK_RATE is a multiple of
-+ * HZ, this is checked in the ixp4xx/common.c code.
-  */
--#define FREQ 66666666
--#define CLOCK_TICK_RATE (((FREQ / HZ & ~IXP4XX_OST_RELOAD_MASK) + 1) * HZ)
-+#define CLOCK_TICK_RATE HZ
- 
-+/* The following allow the exact board tick rate to be set and
-+ * discovered.  The value should be exactly twice the frequency
-+ * (in Hz) of the onboard crystal.
-+ */
-+extern u32 ixp4xx_get_board_tick_rate(void);
-+extern void ixp4xx_set_board_tick_rate(u32 new_rate);
diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6.14/28-spinlock-up.patch b/packages/obsolete/nslu2/nslu2-kernel/2.6.14/28-spinlock-up.patch
deleted file mode 100644
index 3ae5178cff..0000000000
--- a/packages/obsolete/nslu2/nslu2-kernel/2.6.14/28-spinlock-up.patch
+++ /dev/null
@@ -1,32 +0,0 @@
---- linux-2.6.14-rc5/include/linux/spinlock_up.h	2005-10-26 08:37:20.164248408 -0700
-+++ patched/include/linux/spinlock_up.h	2005-10-26 12:15:13.458898975 -0700
-@@ -47,6 +47,14 @@ static inline void __raw_spin_unlock(raw
- 	lock->slock = 1;
- }
- 
-+#else /* DEBUG_SPINLOCK */
-+#define __raw_spin_is_locked(lock)	((void)(lock), 0)
-+/* for sched.c and kernel_lock.c: */
-+# define __raw_spin_lock(lock)		do { (void)(lock); } while (0)
-+# define __raw_spin_unlock(lock)	do { (void)(lock); } while (0)
-+# define __raw_spin_trylock(lock)	({ (void)(lock); 1; })
-+#endif /* DEBUG_SPINLOCK */
-+
- /*
-  * Read-write spinlocks. No debug version.
-  */
-@@ -57,14 +65,6 @@ static inline void __raw_spin_unlock(raw
- #define __raw_read_unlock(lock)		do { (void)(lock); } while (0)
- #define __raw_write_unlock(lock)	do { (void)(lock); } while (0)
- 
--#else /* DEBUG_SPINLOCK */
--#define __raw_spin_is_locked(lock)	((void)(lock), 0)
--/* for sched.c and kernel_lock.c: */
--# define __raw_spin_lock(lock)		do { (void)(lock); } while (0)
--# define __raw_spin_unlock(lock)	do { (void)(lock); } while (0)
--# define __raw_spin_trylock(lock)	({ (void)(lock); 1; })
--#endif /* DEBUG_SPINLOCK */
--
- #define __raw_read_can_lock(lock)	(((void)(lock), 1))
- #define __raw_write_can_lock(lock)	(((void)(lock), 1))
- 
diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6.14/29-ipv4-route-c-spinlock.patch b/packages/obsolete/nslu2/nslu2-kernel/2.6.14/29-ipv4-route-c-spinlock.patch
deleted file mode 100644
index 93e070518c..0000000000
--- a/packages/obsolete/nslu2/nslu2-kernel/2.6.14/29-ipv4-route-c-spinlock.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- linux-2.6.14-rc5/net/ipv4/route.c	2005-10-26 08:37:20.752285410 -0700
-+++ patched/net/ipv4/route.c	2005-10-26 12:17:00.761651111 -0700
-@@ -231,7 +231,7 @@ static spinlock_t	*rt_hash_locks;
- 			spin_lock_init(&rt_hash_locks[i]); \
- 		}
- #else
--# define rt_hash_lock_addr(slot) NULL
-+# define rt_hash_lock_addr(slot) ((spinlock_t*)NULL)
- # define rt_hash_lock_init()
- #endif
- 
diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6.14/30-i2c-x1205.patch b/packages/obsolete/nslu2/nslu2-kernel/2.6.14/30-i2c-x1205.patch
deleted file mode 100644
index 1e775ba8b8..0000000000
--- a/packages/obsolete/nslu2/nslu2-kernel/2.6.14/30-i2c-x1205.patch
+++ /dev/null
@@ -1,714 +0,0 @@
-diff -urN linux-2.6.14-rc3/drivers/i2c/chips/Kconfig test9/drivers/i2c/chips/Kconfig
---- linux-2.6.14-rc3/drivers/i2c/chips/Kconfig	2005-10-01 13:46:50.000000000 +0200
-+++ test9/drivers/i2c/chips/Kconfig	2005-10-03 16:10:22.000000000 +0200
-@@ -126,4 +126,13 @@
- 	  This driver can also be built as a module.  If so, the module
- 	  will be called max6875.
- 
-+config SENSORS_X1205
-+       tristate "Xicor X1205 RTC chip"
-+       depends on I2C
-+       help
-+         If you say yes here you get support for the Xicor X1205 RTC chip.
-+
-+         This driver can also be built as a module.  If so, the module
-+         will be called x1205
-+
- endmenu
-diff -urN linux-2.6.14-rc3/drivers/i2c/chips/Makefile test9/drivers/i2c/chips/Makefile
---- linux-2.6.14-rc3/drivers/i2c/chips/Makefile	2005-09-17 12:42:33.000000000 +0200
-+++ test9/drivers/i2c/chips/Makefile	2005-10-01 15:30:06.000000000 +0200
-@@ -13,6 +13,7 @@
- obj-$(CONFIG_SENSORS_RTC8564)	+= rtc8564.o
- obj-$(CONFIG_ISP1301_OMAP)	+= isp1301_omap.o
- obj-$(CONFIG_TPS65010)		+= tps65010.o
-+obj-$(CONFIG_SENSORS_X1205)     += x1205.o
- 
- ifeq ($(CONFIG_I2C_DEBUG_CHIP),y)
- EXTRA_CFLAGS += -DDEBUG
-diff -urN linux-2.6.14-rc3/drivers/i2c/chips/x1205.c test9/drivers/i2c/chips/x1205.c
---- linux-2.6.14-rc3/drivers/i2c/chips/x1205.c	1970-01-01 01:00:00.000000000 +0100
-+++ test9/drivers/i2c/chips/x1205.c	2005-10-03 16:02:57.000000000 +0200
-@@ -0,0 +1,612 @@
-+/*
-+ *  linux/drivers/i2c/chips/x1205.c
-+ *
-+ *  x1205.c - An 12c driver for the Xicor X1205 RTC
-+ *  Copyright 2004 Karen Spearel
-+ *  Copyright 2005 Alessandro Zummo
-+ *
-+ *  please send all reports to:
-+ *	kas11 at tampabay dot rr dot com
-+ *      a dot zummo at towertech dot it
-+ *     
-+ *  based on the other drivers in this same directory.
-+ *   
-+ *  This program is free software; you can redistribute it and/or modify
-+ *  it under the terms of the GNU General Public License as published by
-+ *  the Free Software Foundation; either version 2 of the License, or
-+ *  (at your option) any later version.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/slab.h>
-+#include <linux/i2c.h>
-+#include <linux/string.h>
-+#include <linux/bcd.h>
-+#include <linux/rtc.h>
-+#include <linux/list.h>
-+
-+#include <linux/x1205.h>
-+
-+#define	EPOCH_1900	1900
-+#define	EPOCH_1970	1970
-+
-+#define DRIVER_VERSION	"0.9.6"
-+#define DRIVER_NAME	(x1205_driver.name)
-+
-+
-+/* Addresses to scan */
-+static unsigned short normal_i2c[] = { X1205_I2C_BUS_ADDR, I2C_CLIENT_END };
-+
-+/* Insmod parameters */
-+I2C_CLIENT_INSMOD;
-+I2C_CLIENT_MODULE_PARM(hctosys,
-+	"Set the system time from the hardware clock upon initialization");
-+
-+/* Prototypes */
-+
-+static int x1205_attach(struct i2c_adapter *adapter);
-+static int x1205_detach(struct i2c_client *client);
-+static int x1205_probe(struct i2c_adapter *adapter, int address, int kind);
-+static int x1205_validate_client(struct i2c_client *client);
-+
-+static int x1205_get_datetime(struct i2c_client *client, struct rtc_time *tm,
-+				u8 reg_base);
-+static int x1205_set_datetime(struct i2c_client *client, struct rtc_time *tm,
-+				int datetoo, u8 reg_base);
-+static int x1205_validate_tm(struct rtc_time *tm);
-+static int x1205_command(struct i2c_client *client, unsigned int cmd, void *arg);
-+static int x1205_hctosys(struct i2c_client *client);
-+
-+
-+static struct i2c_driver x1205_driver = {
-+	.owner		= THIS_MODULE,
-+	.name		= "x1205",
-+	.flags		= I2C_DF_NOTIFY,
-+	.attach_adapter = &x1205_attach,
-+	.detach_client	= &x1205_detach,
-+/*	.command	= &x1205_command,*/
-+};
-+
-+struct x1205_data {
-+	struct i2c_client client;
-+	struct list_head list;
-+	unsigned int epoch;
-+};
-+
-+
-+static const unsigned char days_in_mo[] = 
-+{31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31};
-+
-+static LIST_HEAD(x1205_clients);
-+
-+/* Workaround until the I2C subsytem will allow to send
-+ * commands to a specific client. This function will send the command
-+ * to the first client.
-+ */
-+
-+int x1205_do_command(unsigned int cmd, void *arg)
-+{
-+	struct list_head *walk;
-+	struct list_head *tmp;
-+	struct x1205_data *data;
-+
-+	list_for_each_safe(walk, tmp, &x1205_clients) {
-+		data = list_entry(walk, struct x1205_data, list);
-+		return x1205_command(&data->client, cmd, arg);
-+	}
-+
-+	return -ENODEV;
-+}
-+
-+
-+/*
-+ * in the routines that deal directly with the x1205 hardware, we use
-+ * rtc_time -- month 0-11, hour 0-23, yr = calendar year-epoch
-+ * Epoch is inited as 2000. Time is set to UT
-+ */
-+
-+static int x1205_get_datetime(struct i2c_client *client, struct rtc_time *tm,
-+				u8 reg_base)
-+{
-+	static unsigned char dt_addr[] = { 0, };
-+	static unsigned char sr_addr[] = { 0, };
-+
-+	unsigned char buf[8], sr;	
-+
-+	struct i2c_msg msgs[] = {
-+		{ client->addr, 0, 2, sr_addr }, 	/* random read */
-+		{ client->addr, I2C_M_RD, 1, &sr }, 
-+		{ client->addr, 0, 2, dt_addr },	/* random read */
-+		{ client->addr, I2C_M_RD, 8, buf },
-+	};
-+
-+	struct x1205_data *xdata = i2c_get_clientdata(client);
-+
-+	dt_addr[1] = reg_base;
-+	sr_addr[1] = X1205_REG_SR;
-+
-+	if ((i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs))) ==
-+		ARRAY_SIZE(msgs)) {
-+		/* did we read the correct number of messages? */
-+
-+		/* check for battery failure */
-+		if (sr & X1205_SR_RTCF)
-+		{	
-+			dev_info(&client->adapter->dev,
-+				"%s: Clock had a power failure, you must set the date.\n",
-+				DRIVER_NAME);
-+
-+			return -EINVAL;
-+		}
-+
-+		dev_dbg(&client->dev,
-+			"%s: raw read data - sec-%02x min-%02x hr-%02x"
-+			" mday-%02x mon-%02x year-%02x wday-%02x y2k-%02x\n", 
-+			__FUNCTION__,
-+			buf[0], buf[1], buf[2], buf[3],
-+			buf[4], buf[5], buf[6], buf[7]);
-+
-+		tm->tm_sec  = BCD2BIN(buf[CCR_SEC]);
-+		tm->tm_min  = BCD2BIN(buf[CCR_MIN]);
-+		buf[CCR_HOUR] &= ~X1205_HR_MIL;
-+		tm->tm_hour = BCD2BIN(buf[CCR_HOUR]); /* hr is 0-23 */
-+		tm->tm_mday = BCD2BIN(buf[CCR_MDAY]);
-+		tm->tm_mon  = BCD2BIN(buf[CCR_MONTH]);
-+		xdata->epoch   = BCD2BIN(buf[CCR_Y2K]) * 100;
-+		tm->tm_year = BCD2BIN(buf[CCR_YEAR]) + xdata->epoch - EPOCH_1900;
-+		tm->tm_wday = buf[CCR_WDAY];
-+
-+		dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d, "
-+			"mday=%d, mon=%d, year=%d, wday=%d\n",
-+			__FUNCTION__,
-+			tm->tm_sec, tm->tm_min, tm->tm_hour,
-+			tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
-+
-+	} else {
-+		dev_dbg(&client->dev, "%s: read error\n", __FUNCTION__);
-+		return -EIO;
-+	}		
-+	
-+	return 0;
-+}
-+
-+
-+static int x1205_set_datetime(struct i2c_client *client, struct rtc_time *tm,
-+				int datetoo, u8 reg_base)
-+{
-+	int i, err, xfer;
-+
-+	static unsigned char wel[3]   = { 0, X1205_REG_SR,
-+					X1205_SR_WEL };
-+
-+
-+	static unsigned char rwel[3]  = { 0, X1205_REG_SR,
-+					X1205_SR_WEL | X1205_SR_RWEL };
-+
-+	static unsigned char diswe[3] = { 0, X1205_REG_SR, 0 };
-+
-+	static unsigned char data[3]  = { 0, };
-+	static unsigned char buf[8];
-+
-+	struct x1205_data *xdata = i2c_get_clientdata(client);
-+
-+	if ((err = x1205_validate_tm(tm)) < 0)
-+		return err;
-+
-+	dev_dbg(&client->dev, "%s: secs=%d, mins=%d, hours=%d, "
-+		"mday=%d, mon=%d, year=%d, wday=%d\n",
-+		__FUNCTION__,
-+		tm->tm_sec, tm->tm_min, tm->tm_hour,
-+		tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
-+
-+
-+	buf[CCR_SEC]  = BIN2BCD(tm->tm_sec);
-+	buf[CCR_MIN]  = BIN2BCD(tm->tm_min);
-+
-+	/* Set 24HR format */
-+	buf[CCR_HOUR] = BIN2BCD(tm->tm_hour) | X1205_HR_MIL;
-+
-+	if (datetoo == X1205_DATETOO) {
-+		buf[CCR_MDAY]  = BIN2BCD(tm->tm_mday);
-+
-+		/* month, 0 - 11 */
-+		buf[CCR_MONTH] = BIN2BCD(tm->tm_mon);	/* input is 0-11 */
-+
-+		/* year, since 1900 */
-+		buf[CCR_YEAR]  = BIN2BCD((tm->tm_year + EPOCH_1900 - xdata->epoch));
-+		buf[CCR_WDAY]  = tm->tm_wday & 7;
-+		buf[CCR_Y2K]   = BIN2BCD(xdata->epoch / 100);
-+	}
-+
-+	xfer = i2c_master_send(client, wel, 3);
-+	dev_dbg(&client->dev, "%s: wen - %x\n", __FUNCTION__, xfer);
-+	if (xfer != 3)
-+		return -EIO;
-+
-+	xfer = i2c_master_send(client, rwel, 3);
-+	dev_dbg(&client->dev, "%s: wenb - %x\n", __FUNCTION__, xfer);
-+	if (xfer != 3)
-+		return -EIO;
-+
-+	for (i = 0; i < 8; i++) {
-+		data[1] = i + reg_base;
-+		data[2] =  buf[i];
-+		xfer = i2c_master_send(client, data, 3);
-+
-+		dev_dbg(&client->dev, "%s: xfer %d addr, %02x,  data %02x\n",
-+			__FUNCTION__,
-+			 xfer, data[1], data[2]);
-+
-+		if (xfer != 3)
-+			return -EIO;
-+	};
-+
-+	xfer = i2c_master_send(client, diswe, 3);
-+	dev_dbg(&client->dev, "%s: wdis - %x\n", __FUNCTION__, xfer);
-+	if (xfer != 3)
-+		return -EIO;		
-+
-+	return 0;
-+}
-+
-+static int x1205_hctosys(struct i2c_client *client)
-+{
-+	int err;
-+
-+	struct rtc_time tm;
-+	struct timespec tv;
-+	
-+
-+	err = x1205_command(client, X1205_CMD_GETDATETIME, &tm);
-+
-+	if (err)
-+	{
-+		dev_info(&client->adapter->dev,
-+			"%s: Unable to set the system clock\n",
-+			DRIVER_NAME);
-+
-+		return err;
-+
-+	}
-+
-+	/* IMPORTANT: the RTC only stores whole seconds.  It is arbitrary whether
-+	 * it stores the most close value or the value with partial seconds
-+	 * truncated, however it is important for x1205_sync_rtc that it be
-+	 * defined to store the truncated value.  This is because otherwise it
-+	 * is necessary to read both xtime.tv_sec and xtime.tv_nsec in the
-+	 * sync function, and atomic reads of >32bits on ARM are not possible.
-+	 * So storing the most close value would slow down the sync API.  So
-+	 * Here we have the truncated value and the best guess is to add 0.5s
-+	 */
-+
-+	tv.tv_nsec = NSEC_PER_SEC >> 1;
-+
-+	/* WARNING: this is not the C library 'mktime' call, it is a built in
-+	 * inline function from include/linux/time.h.  It expects (requires)
-+	 * the month to be in the range 1-12
-+	 */
-+
-+	tv.tv_sec  = mktime(tm.tm_year + EPOCH_1900, tm.tm_mon + 1,
-+				tm.tm_mday, tm.tm_hour,
-+				tm.tm_min, tm.tm_sec);
-+
-+	do_settimeofday(&tv);
-+
-+	dev_info(&client->adapter->dev,
-+		"%s: Setting the system clock to %d-%d-%d %d:%d:%d\n",
-+		DRIVER_NAME,
-+		tm.tm_year + EPOCH_1900, tm.tm_mon + 1,
-+		tm.tm_mday, tm.tm_hour, tm.tm_min,
-+		tm.tm_sec);
-+
-+	return 0;
-+}
-+
-+struct x1205_limit
-+{
-+	unsigned char reg;
-+	unsigned char mask;
-+	unsigned char min;	
-+	unsigned char max;
-+};
-+
-+static int x1205_validate_client(struct i2c_client *client)
-+{
-+	int i, xfer;
-+
-+	/* Probe array. We will read the register at the specified
-+	 * address and check if the given bits are zero.
-+	 */
-+
-+	const unsigned char probe_zero_pattern[] = {
-+
-+		X1205_REG_SR,	0x18,
-+		X1205_REG_Y2K,	0xC6,
-+		X1205_REG_DW,	0xF8,
-+		X1205_REG_MO,	0xE0,
-+		X1205_REG_DT,	0xC0,
-+		X1205_REG_HR,	0x40,
-+		X1205_REG_MN,	0x80,
-+		X1205_REG_SC,	0x80,
-+		X1205_REG_DTR,	0xF8,
-+		X1205_REG_ATR,	0xC0,
-+		X1205_REG_INT,	0x18,
-+		X1205_REG_0,	0xFF,
-+		X1205_REG_Y2K1,	0xC6,
-+		X1205_REG_DWA1,	0x78,
-+		X1205_REG_MOA1,	0x60,
-+		X1205_REG_DTA1,	0x40,
-+		X1205_REG_HRA1,	0x40,
-+		X1205_REG_Y2K0,	0xC6,
-+		X1205_REG_DWA0,	0x78,
-+		X1205_REG_MOA0,	0x60,
-+		X1205_REG_DTA0,	0x40,
-+		X1205_REG_HRA0,	0x40,
-+	};
-+
-+	const struct x1205_limit probe_limits_pattern[] = {
-+		/* register, mask, min, max */
-+		{ X1205_REG_Y2K,	0xFF,	19,	20	},
-+		{ X1205_REG_DW,		0xFF,	0,	6	},
-+		{ X1205_REG_YR,		0xFF,	0,	99	},
-+		{ X1205_REG_MO,		0xFF,	0,	12	},
-+		{ X1205_REG_DT,		0xFF,	0,	31	},
-+		{ X1205_REG_HR,		0x7F,	0,	23	},
-+		{ X1205_REG_MN,		0xFF,	0,	59	},
-+		{ X1205_REG_SC,		0xFF,	0,	59	},
-+		{ X1205_REG_Y2K1,	0xFF,	19,	20	},
-+		{ X1205_REG_DWA1,	0x7F,	0,	6	},
-+		{ X1205_REG_MOA1,	0x7F,	0,	12	},
-+		{ X1205_REG_DTA1,	0x7F,	0,	31	},
-+		{ X1205_REG_HRA1,	0x7F,	0,	23	},
-+		{ X1205_REG_MNA1,	0x7F,	0,	59	},
-+		{ X1205_REG_SCA1,	0x7F,	0,	59	},
-+		{ X1205_REG_Y2K0,	0xFF,	19,	20	},
-+		{ X1205_REG_DWA0,	0x7F,	0,	6	},
-+		{ X1205_REG_MOA0,	0x7F,	0,	12	},
-+		{ X1205_REG_DTA0,	0x7F,	0,	31	},
-+		{ X1205_REG_HRA0,	0x7F,	0,	23	},
-+		{ X1205_REG_MNA0,	0x7F,	0,	59	},
-+		{ X1205_REG_SCA0,	0x7F,	0,	59	},
-+	};
-+
-+	/* check that registers have bits a 0 where expected */
-+
-+	for (i = 0; i < ARRAY_SIZE(probe_zero_pattern); i += 2)
-+	{
-+		unsigned char buf;
-+
-+		static unsigned char addr[2];
-+
-+		struct i2c_msg msgs[2] = {
-+			{ client->addr, 0, 2, addr },	/* random read */
-+			{ client->addr, I2C_M_RD, 1, &buf },
-+		};
-+
-+		addr[0] = 0x00;
-+		addr[1] = probe_zero_pattern[i];
-+
-+		xfer = i2c_transfer(client->adapter, msgs, 2);
-+
-+		if (xfer != 2) {
-+			dev_dbg(&client->adapter->dev, 
-+				"%s: could not read register %x\n",
-+				__FUNCTION__, addr[1]);
-+
-+			return -EIO;
-+		}
-+
-+		if ((buf & probe_zero_pattern[i+1]) != 0) {
-+			dev_dbg(&client->adapter->dev,
-+				"%s: register %x, zero pattern %d: %x\n",
-+				__FUNCTION__, addr[1], i, buf);
-+
-+			return -ENODEV;
-+		}
-+	}
-+
-+	/* check limits */
-+
-+	for (i = 0; i < ARRAY_SIZE(probe_limits_pattern); i++)
-+	{
-+		unsigned char buf, val;
-+
-+		static unsigned char addr[2];
-+
-+		struct i2c_msg msgs[2] = {
-+			{ client->addr, 0, 2, addr },	/* random read */
-+			{ client->addr, I2C_M_RD, 1, &buf },
-+		};
-+
-+		addr[0] = 0x00;
-+		addr[1] = probe_limits_pattern[i].reg;
-+
-+		xfer = i2c_transfer(client->adapter, msgs, 2);
-+
-+		if (xfer != 2) {
-+			dev_dbg(&client->adapter->dev, 
-+				"%s: could not read register %x\n",
-+				__FUNCTION__, addr[1]);
-+
-+			return -EIO;
-+		}
-+
-+		val = BCD2BIN(buf & probe_limits_pattern[i].mask);
-+
-+		if (val > probe_limits_pattern[i].max ||
-+			val < probe_limits_pattern[i].min) {
-+			dev_dbg(&client->adapter->dev,
-+				"%s: register %x, lim pattern %d: %d\n",
-+				__FUNCTION__, addr[1], i, val);
-+
-+			return -ENODEV;
-+		}
-+	}
-+
-+	return 0;
-+}
-+
-+static int x1205_attach(struct i2c_adapter *adapter)
-+{
-+	dev_dbg(&adapter->dev, "%s\n", __FUNCTION__);
-+
-+	return i2c_probe(adapter, &addr_data, x1205_probe);
-+}
-+
-+static int x1205_probe(struct i2c_adapter *adapter, int address, int kind)
-+{
-+	struct i2c_client *new_client;
-+	struct x1205_data *xdata;
-+
-+	int err = 0;
-+
-+	dev_dbg(&adapter->dev, "%s\n", __FUNCTION__);
-+
-+	if (!(xdata = kmalloc(sizeof(struct x1205_data), GFP_KERNEL))) {
-+		err = -ENOMEM;
-+		goto exit;
-+	}
-+
-+	/* Fill our data structure */
-+
-+	memset(xdata, 0, sizeof(struct x1205_data));
-+
-+	xdata->epoch = 2000;
-+
-+
-+	/* Prepare i2c_client structure */
-+
-+	new_client		= &xdata->client;
-+	i2c_set_clientdata(new_client, xdata);
-+	new_client->addr	= address;
-+	new_client->adapter	= adapter;
-+	new_client->driver	= &x1205_driver;
-+	new_client->flags	= 0;
-+	
-+	strlcpy(new_client->name, "x1205", I2C_NAME_SIZE);
-+
-+
-+	/* Verify the chip is really an X1205 */
-+
-+	if (kind < 0)
-+	{
-+		if (x1205_validate_client(new_client) < 0) {
-+			err = -ENODEV;
-+			goto exit_kfree;
-+		}
-+	}
-+
-+	/* Inform the i2c layer */
-+	if ((err = i2c_attach_client(new_client)))
-+		goto exit_kfree;
-+
-+	list_add(&xdata->list, &x1205_clients);
-+
-+	dev_info(&adapter->dev, "%s: Chip found, driver " DRIVER_VERSION "\n",
-+			DRIVER_NAME);
-+
-+	/* If requested, se the system time */
-+	if (hctosys)
-+		x1205_hctosys(new_client);
-+
-+	return 0;
-+
-+exit_kfree:
-+	kfree(xdata);
-+
-+exit:
-+	return err;
-+}
-+
-+static int x1205_detach(struct i2c_client *client)
-+{
-+	int err;
-+	struct x1205_data *data = i2c_get_clientdata(client);
-+	
-+	dev_dbg(&client->dev, "%s\n", __FUNCTION__);
-+
-+	if ((err = i2c_detach_client(client)))
-+		return err;
-+
-+	list_del(&data->list);
-+	kfree(data);
-+	return 0;
-+}
-+
-+/* make sure the rtc_time values are in bounds */
-+static int x1205_validate_tm(struct rtc_time *tm)
-+{
-+	tm->tm_year += 1900;
-+
-+	if (tm->tm_year < EPOCH_1970)
-+		return -EINVAL;
-+
-+	if ((tm->tm_mon > 11) || (tm->tm_mday == 0))
-+		return -EINVAL;
-+
-+	if (tm->tm_mday > (days_in_mo[tm->tm_mon] + ( (tm->tm_mon == 1) && 
-+		((!(tm->tm_year % 4) && (tm->tm_year % 100) ) || !(tm->tm_year % 400)))))
-+		return -EINVAL;
-+
-+	if ((tm->tm_year -= EPOCH_1900) > 255)
-+		return -EINVAL;
-+			
-+	if ((tm->tm_hour >= 24) || (tm->tm_min >= 60) || (tm->tm_sec >= 60))
-+		return -EINVAL;
-+
-+	return 0;
-+}
-+
-+static int x1205_command(struct i2c_client *client, unsigned int cmd, void *tm)
-+{
-+	if (client == NULL || tm == NULL)
-+		return -EINVAL;
-+
-+	if (!capable(CAP_SYS_TIME))
-+		return -EACCES;
-+
-+	dev_dbg(&client->dev, "%s: cmd=%d\n", __FUNCTION__, cmd);
-+
-+	switch (cmd) {
-+	case X1205_CMD_GETDATETIME:
-+		return x1205_get_datetime(client, tm, X1205_CCR_BASE);
-+
-+	case X1205_CMD_SETTIME:
-+		return x1205_set_datetime(client, tm, X1205_NODATE, X1205_CCR_BASE);
-+
-+	case X1205_CMD_SETDATETIME:
-+		return x1205_set_datetime(client, tm, X1205_DATETOO, X1205_CCR_BASE);
-+
-+	case X1205_CMD_GETALARM:
-+		return x1205_get_datetime(client, tm, X1205_ALM0_BASE);
-+
-+	case X1205_CMD_SETALARM:
-+		return x1205_set_datetime(client, tm, X1205_DATETOO, X1205_ALM0_BASE);
-+
-+	default:
-+		return -EINVAL;
-+	}
-+}
-+
-+
-+static int __init x1205_init(void)
-+{
-+	return i2c_add_driver(&x1205_driver);
-+}
-+
-+static void __exit x1205_exit(void)
-+{
-+	i2c_del_driver(&x1205_driver);
-+}
-+
-+MODULE_AUTHOR(
-+	"Karen Spearel <kas11@tampabay.rr.com>, "
-+	"Alessandro Zummo <a.zummo@towertech.it>");
-+MODULE_DESCRIPTION("Xicor X1205 RTC driver");
-+MODULE_LICENSE("GPL");
-+
-+EXPORT_SYMBOL_GPL(x1205_do_command);
-+
-+module_init(x1205_init);
-+module_exit(x1205_exit);
---- linux-2.6.14-rc3/include/linux/x1205.h	1970-01-01 01:00:00.000000000 +0100
-+++ test9/include/linux/x1205.h	2005-10-03 15:38:21.000000000 +0200
-@@ -0,0 +1,67 @@
-+
-+/* commands */
-+
-+#define	X1205_CMD_GETDATETIME	0
-+#define	X1205_CMD_SETTIME	1
-+#define	X1205_CMD_SETDATETIME	2
-+#define X1205_CMD_GETALARM	3
-+#define X1205_CMD_SETALARM	4
-+
-+/* flags */
-+
-+#define	X1205_NODATE		0
-+#define	X1205_DATETOO		1
-+
-+/*  offsets into read buf - add 2 for write buf */
-+
-+#define	CCR_SEC			0
-+#define	CCR_MIN			1
-+#define	CCR_HOUR		2
-+#define	CCR_MDAY		3
-+#define	CCR_MONTH		4
-+#define	CCR_YEAR		5
-+#define	CCR_WDAY		6
-+#define	CCR_Y2K			7
-+
-+#define	X1205_REG_SR		0x3F	/* status register */
-+#define	X1205_REG_Y2K		0x37
-+#define	X1205_REG_DW		0x36
-+#define	X1205_REG_YR		0x35
-+#define	X1205_REG_MO		0x34
-+#define	X1205_REG_DT		0x33
-+#define	X1205_REG_HR		0x32
-+#define	X1205_REG_MN		0x31
-+#define	X1205_REG_SC		0x30
-+#define	X1205_REG_DTR		0x13
-+#define	X1205_REG_ATR		0x12
-+#define	X1205_REG_INT		0x11
-+#define	X1205_REG_0		0x10
-+#define	X1205_REG_Y2K1		0x0F
-+#define	X1205_REG_DWA1		0x0E
-+#define	X1205_REG_YRA1		0x0D
-+#define	X1205_REG_MOA1		0x0C
-+#define	X1205_REG_DTA1		0x0B
-+#define	X1205_REG_HRA1		0x0A
-+#define	X1205_REG_MNA1		0x09
-+#define	X1205_REG_SCA1		0x08
-+#define	X1205_REG_Y2K0		0x07
-+#define	X1205_REG_DWA0		0x06
-+#define	X1205_REG_YRA0		0x05
-+#define	X1205_REG_MOA0		0x04
-+#define	X1205_REG_DTA0		0x03
-+#define	X1205_REG_HRA0		0x02
-+#define	X1205_REG_MNA0		0x01
-+#define	X1205_REG_SCA0		0x00
-+
-+#define	X1205_I2C_BUS_ADDR	0x6f	/* hardwired into x1205 */
-+#define	X1205_CCR_BASE		0x30	/* Base address of CCR */
-+#define	X1205_ALM0_BASE		0x00	/* Base address of ALARM0 */
-+
-+#define X1205_SR_RTCF		0x01
-+#define	X1205_SR_WEL		0x02	/* Write Enable Latch bit */
-+#define	X1205_SR_RWEL		0x04	/* Register Write Enable Bit */
-+
-+#define	X1205_HR_MIL		0x80	/* set in ccr.hour for 24 hr mode */
-+
-+extern int x1205_do_command(unsigned int cmd, void *arg);
-+
diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6.14/50-nslu2-arch.patch b/packages/obsolete/nslu2/nslu2-kernel/2.6.14/50-nslu2-arch.patch
deleted file mode 100644
index 038c71c3b3..0000000000
--- a/packages/obsolete/nslu2/nslu2-kernel/2.6.14/50-nslu2-arch.patch
+++ /dev/null
@@ -1,461 +0,0 @@
---- linux-2.6.14/arch/arm/mach-ixp4xx/Kconfig	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.14/arch/arm/mach-ixp4xx/Kconfig	1970-01-01 00:00:00.000000000 +0000
-@@ -8,6 +8,16 @@ menu "Intel IXP4xx Implementation Option
- 
- comment "IXP4xx Platforms"
- 
-+# This entry is placed on top because otherwise it would have
-+# been shown as a submenu.
-+config MACH_NSLU2
-+	bool
-+	prompt "NSLU2" if !(MACH_IXDP465 || MACH_IXDPG425 || ARCH_IXDP425 || ARCH_ADI_COYOTE || ARCH_AVILA || ARCH_IXCDP1100 || ARCH_PRPMC1100 || MACH_GTWX5715)
-+	help
-+	  Say 'Y' here if you want your kernel to support Linksys's
-+	  NSLU2 NAS device. For more information on this platform,
-+	  see http://www.nslu2-linux.org
-+
- config ARCH_AVILA
- 	bool "Avila"
- 	help
---- linux-2.6.14/arch/arm/mach-ixp4xx/Makefile	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.14/arch/arm/mach-ixp4xx/Makefile	1970-01-01 00:00:00.000000000 +0000
-@@ -8,4 +8,5 @@ obj-$(CONFIG_ARCH_IXDP4XX)	+= ixdp425-pc
- obj-$(CONFIG_MACH_IXDPG425)	+= ixdpg425-pci.o coyote-setup.o
- obj-$(CONFIG_ARCH_ADI_COYOTE)	+= coyote-pci.o coyote-setup.o
- obj-$(CONFIG_MACH_GTWX5715)	+= gtwx5715-pci.o gtwx5715-setup.o
-+obj-$(CONFIG_MACH_NSLU2)	+= nslu2-pci.o nslu2-setup.o nslu2-power.o
- 
---- linux-2.6.14/arch/arm/mach-ixp4xx/nslu2-pci.c	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.14/arch/arm/mach-ixp4xx/nslu2-pci.c	1970-01-01 00:00:00.000000000 +0000
-@@ -0,0 +1,77 @@
-+/*
-+ * arch/arm/mach-ixp4xx/nslu2-pci.c
-+ *
-+ * NSLU2 board-level PCI initialization
-+ *
-+ * based on ixdp425-pci.c:
-+ *	Copyright (C) 2002 Intel Corporation.
-+ *	Copyright (C) 2003-2004 MontaVista Software, Inc.
-+ *
-+ * Maintainer: http://www.nslu2-linux.org/
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/config.h>
-+#include <linux/pci.h>
-+#include <linux/init.h>
-+
-+#include <asm/mach/pci.h>
-+#include <asm/mach-types.h>
-+
-+void __init nslu2_pci_preinit(void)
-+{
-+	set_irq_type(IRQ_NSLU2_PCI_INTA, IRQT_LOW);
-+	set_irq_type(IRQ_NSLU2_PCI_INTB, IRQT_LOW);
-+	set_irq_type(IRQ_NSLU2_PCI_INTC, IRQT_LOW);
-+
-+	gpio_line_isr_clear(NSLU2_PCI_INTA_PIN);
-+	gpio_line_isr_clear(NSLU2_PCI_INTB_PIN);
-+	gpio_line_isr_clear(NSLU2_PCI_INTC_PIN);
-+
-+	/* INTD is not configured as GPIO is used
-+	 * for the power input button.
-+	 */
-+
-+	ixp4xx_pci_preinit();
-+}
-+
-+static int __init nslu2_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+	static int pci_irq_table[NSLU2_PCI_IRQ_LINES] = {
-+		IRQ_NSLU2_PCI_INTA,
-+		IRQ_NSLU2_PCI_INTB,
-+		IRQ_NSLU2_PCI_INTC,
-+	};
-+
-+	int irq = -1;
-+
-+	if (slot >= 1 && slot <= NSLU2_PCI_MAX_DEV &&
-+		pin >= 1 && pin <= NSLU2_PCI_IRQ_LINES) {
-+			irq = pci_irq_table[(slot + pin - 2) % NSLU2_PCI_IRQ_LINES];
-+	}
-+
-+	return irq;
-+}
-+
-+struct hw_pci __initdata nslu2_pci = {
-+	.nr_controllers = 1,
-+	.preinit	= nslu2_pci_preinit,
-+	.swizzle	= pci_std_swizzle,
-+	.setup		= ixp4xx_setup,
-+	.scan		= ixp4xx_scan_bus,
-+	.map_irq	= nslu2_map_irq,
-+};
-+
-+int __init nslu2_pci_init(void) /* monkey see, monkey do */
-+{
-+	if (machine_is_nslu2())
-+		pci_common_init(&nslu2_pci);
-+
-+	return 0;
-+}
-+
-+subsys_initcall(nslu2_pci_init);
---- linux-2.6.14/arch/arm/mach-ixp4xx/nslu2-power.c	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.14/arch/arm/mach-ixp4xx/nslu2-power.c	1970-01-01 00:00:00.000000000 +0000
-@@ -0,0 +1,92 @@
-+/*
-+ * arch/arm/mach-ixp4xx/nslu2-power.c
-+ *
-+ * NSLU2 Power/Reset driver
-+ *
-+ * Copyright (C) 2005 Tower Technologies
-+ *
-+ * based on nslu2-io.c
-+ *  Copyright (C) 2004 Karen Spearel
-+ *
-+ * Author: Alessandro Zummo <a.zummo@towertech.it>
-+ * Maintainers: http://www.nslu2-linux.org/
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/reboot.h>
-+#include <linux/interrupt.h>
-+
-+#include <asm/mach-types.h>
-+
-+extern void ctrl_alt_del(void);
-+
-+static irqreturn_t nslu2_power_handler(int irq, void *dev_id, struct pt_regs *regs)
-+{
-+	/* Signal init to do the ctrlaltdel action, this will bypass init if
-+	 * it hasn't started and do a kernel_restart.
-+	 */
-+	ctrl_alt_del();
-+
-+	return IRQ_HANDLED;
-+}
-+
-+static irqreturn_t nslu2_reset_handler(int irq, void *dev_id, struct pt_regs *regs)
-+{
-+	/* This is the paper-clip reset, it shuts the machine down directly.
-+	 */
-+	machine_power_off();
-+
-+	return IRQ_HANDLED;
-+}
-+
-+static int __init nslu2_power_init(void)
-+{
-+	if (!(machine_is_nslu2()))
-+		return 0;
-+
-+	*IXP4XX_GPIO_GPISR = 0x20400000;	/* read the 2 irqs to clr */
-+
-+	set_irq_type(NSLU2_RB_IRQ, IRQT_LOW);
-+	set_irq_type(NSLU2_PB_IRQ, IRQT_HIGH);
-+
-+	gpio_line_isr_clear(NSLU2_RB_GPIO);
-+	gpio_line_isr_clear(NSLU2_PB_GPIO);
-+
-+	if (request_irq(NSLU2_RB_IRQ, &nslu2_reset_handler,
-+		SA_INTERRUPT, "NSLU2 reset button", NULL) < 0) {
-+
-+		printk(KERN_DEBUG "Reset Button IRQ %d not available\n",
-+			NSLU2_RB_IRQ);
-+
-+		return -EIO;
-+	}
-+
-+	if (request_irq(NSLU2_PB_IRQ, &nslu2_power_handler,
-+		SA_INTERRUPT, "NSLU2 power button", NULL) < 0) {
-+
-+		printk(KERN_DEBUG "Power Button IRQ %d not available\n",
-+			NSLU2_PB_IRQ);
-+
-+		return -EIO;
-+	}
-+
-+	return 0;
-+}
-+
-+static void __exit nslu2_power_exit(void)
-+{
-+	free_irq(NSLU2_RB_IRQ, NULL);
-+	free_irq(NSLU2_PB_IRQ, NULL);
-+}
-+
-+module_init(nslu2_power_init);
-+module_exit(nslu2_power_exit);
-+
-+MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>");
-+MODULE_DESCRIPTION("NSLU2 Power/Reset driver");
-+MODULE_LICENSE("GPL");
---- linux-2.6.14/arch/arm/mach-ixp4xx/nslu2-setup.c	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.14/arch/arm/mach-ixp4xx/nslu2-setup.c	1970-01-01 00:00:00.000000000 +0000
-@@ -0,0 +1,134 @@
-+/*
-+ * arch/arm/mach-ixp4xx/nslu2-setup.c
-+ *
-+ * NSLU2 board-setup
-+ *
-+ * based ixdp425-setup.c:
-+ *      Copyright (C) 2003-2004 MontaVista Software, Inc.
-+ *
-+ * Author: Mark Rakes <mrakes at mac.com>
-+ * Maintainers: http://www.nslu2-linux.org/
-+ *
-+ * Fixed missing init_time in MACHINE_START kas11 10/22/04
-+ * Changed to conform to new style __init ixdp425 kas11 10/22/04
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/serial.h>
-+#include <linux/serial_8250.h>
-+
-+#include <asm/mach-types.h>
-+#include <asm/mach/arch.h>
-+#include <asm/mach/flash.h>
-+
-+static struct flash_platform_data nslu2_flash_data = {
-+	.map_name		= "cfi_probe",
-+	.width			= 2,
-+};
-+
-+static struct resource nslu2_flash_resource = {
-+	.start			= NSLU2_FLASH_BASE,
-+	.end			= NSLU2_FLASH_BASE + NSLU2_FLASH_SIZE,
-+	.flags			= IORESOURCE_MEM,
-+};
-+
-+static struct platform_device nslu2_flash = {
-+	.name			= "IXP4XX-Flash",
-+	.id			= 0,
-+	.dev.platform_data	= &nslu2_flash_data,
-+	.num_resources		= 1,
-+	.resource		= &nslu2_flash_resource,
-+};
-+
-+static struct ixp4xx_i2c_pins nslu2_i2c_gpio_pins = {
-+	.sda_pin		= NSLU2_SDA_PIN,
-+	.scl_pin		= NSLU2_SCL_PIN,
-+};
-+
-+static struct platform_device nslu2_i2c_controller = {
-+	.name			= "IXP4XX-I2C",
-+	.id			= 0,
-+	.dev.platform_data	= &nslu2_i2c_gpio_pins,
-+	.num_resources		= 0,
-+};
-+
-+static struct resource nslu2_uart_resources[] = {
-+	{
-+		.start		= IXP4XX_UART1_BASE_PHYS,
-+		.end		= IXP4XX_UART1_BASE_PHYS + 0x0fff,
-+		.flags		= IORESOURCE_MEM,
-+	},
-+	{
-+		.start		= IXP4XX_UART2_BASE_PHYS,
-+		.end		= IXP4XX_UART2_BASE_PHYS + 0x0fff,
-+		.flags		= IORESOURCE_MEM,
-+	}
-+};
-+
-+static struct plat_serial8250_port nslu2_uart_data[] = {
-+	{
-+		.mapbase	= IXP4XX_UART1_BASE_PHYS,
-+		.membase	= (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
-+		.irq		= IRQ_IXP4XX_UART1,
-+		.flags		= UPF_BOOT_AUTOCONF,
-+		.iotype		= UPIO_MEM,
-+		.regshift	= 2,
-+		.uartclk	= IXP4XX_UART_XTAL,
-+	},
-+	{
-+		.mapbase	= IXP4XX_UART2_BASE_PHYS,
-+		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-+		.irq		= IRQ_IXP4XX_UART2,
-+		.flags		= UPF_BOOT_AUTOCONF,
-+		.iotype		= UPIO_MEM,
-+		.regshift	= 2,
-+		.uartclk	= IXP4XX_UART_XTAL,
-+	},
-+	{ }
-+};
-+
-+static struct platform_device nslu2_uart = {
-+	.name			= "serial8250",
-+	.id			= PLAT8250_DEV_PLATFORM,
-+	.dev.platform_data	= nslu2_uart_data,
-+	.num_resources		= 2,
-+	.resource		= nslu2_uart_resources,
-+};
-+
-+static struct platform_device *nslu2_devices[] __initdata = {
-+	&nslu2_i2c_controller,
-+	&nslu2_flash,
-+	&nslu2_uart,
-+};
-+
-+static void nslu2_power_off(void)
-+{
-+	/* This causes the box to drop the power and go dead. */
-+
-+	/* enable the pwr cntl gpio */
-+	gpio_line_config(NSLU2_PO_GPIO, IXP4XX_GPIO_OUT);
-+
-+	/* do the deed */
-+	gpio_line_set(NSLU2_PO_GPIO, IXP4XX_GPIO_HIGH);
-+}
-+
-+static void __init nslu2_init(void)
-+{
-+	ixp4xx_sys_init();
-+
-+	pm_power_off = nslu2_power_off;
-+
-+	platform_add_devices(nslu2_devices, ARRAY_SIZE(nslu2_devices));
-+}
-+
-+MACHINE_START(NSLU2, "Linksys NSLU2")
-+	/* Maintainer: www.nslu2-linux.org */
-+	.phys_ram	= PHYS_OFFSET,
-+	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
-+	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xFFFC,
-+	.boot_params	= 0x00000100,
-+	.map_io		= ixp4xx_map_io,
-+	.init_irq	= ixp4xx_init_irq,
-+	.timer          = &ixp4xx_timer,
-+	.init_machine	= nslu2_init,
-+MACHINE_END
---- linux-2.6.14/include/asm-arm/arch-ixp4xx/hardware.h	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.14/include/asm-arm/arch-ixp4xx/hardware.h	1970-01-01 00:00:00.000000000 +0000
-@@ -44,5 +44,6 @@ extern unsigned int processor_id;
- #include "ixdp425.h"
- #include "coyote.h"
- #include "prpmc1100.h"
-+#include "nslu2.h"
- 
- #endif  /* _ASM_ARCH_HARDWARE_H */
---- linux-2.6.14/include/asm-arm/arch-ixp4xx/irqs.h	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.14/include/asm-arm/arch-ixp4xx/irqs.h	1970-01-01 00:00:00.000000000 +0000
-@@ -93,4 +93,11 @@
- #define	IRQ_COYOTE_PCI_SLOT1	IRQ_IXP4XX_GPIO11
- #define	IRQ_COYOTE_IDE		IRQ_IXP4XX_GPIO5
- 
-+/*
-+ * NSLU2 board IRQs
-+ */
-+#define        IRQ_NSLU2_PCI_INTA      IRQ_IXP4XX_GPIO11
-+#define        IRQ_NSLU2_PCI_INTB      IRQ_IXP4XX_GPIO10
-+#define        IRQ_NSLU2_PCI_INTC      IRQ_IXP4XX_GPIO9
-+
- #endif
---- linux-2.6.14/include/asm-arm/arch-ixp4xx/nslu2.h	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.14/include/asm-arm/arch-ixp4xx/nslu2.h	1970-01-01 00:00:00.000000000 +0000
-@@ -0,0 +1,96 @@
-+/*
-+ * include/asm-arm/arch-ixp4xx/nslu2.h
-+ *
-+ * NSLU2 platform specific definitions
-+ *
-+ * Author: Mark Rakes <mrakes AT mac.com>
-+ * Maintainers: http://www.nslu2-linux.org
-+ *
-+ * based on ixdp425.h:
-+ *	Copyright 2004 (c) MontaVista, Software, Inc.
-+ *
-+ * This file is licensed under  the terms of the GNU General Public
-+ * License version 2. This program is licensed "as is" without any
-+ * warranty of any kind, whether express or implied.
-+ */
-+
-+#ifndef __ASM_ARCH_HARDWARE_H__
-+#error "Do not include this directly, instead #include <asm/hardware.h>"
-+#endif
-+
-+#define NSLU2_FLASH_BASE	IXP4XX_EXP_BUS_CS0_BASE_PHYS
-+#define NSLU2_FLASH_SIZE	IXP4XX_EXP_BUS_CSX_REGION_SIZE
-+
-+#define NSLU2_SDA_PIN		7
-+#define NSLU2_SCL_PIN		6
-+
-+/*
-+ * NSLU2 PCI IRQs
-+ */
-+#define NSLU2_PCI_MAX_DEV	3
-+#define NSLU2_PCI_IRQ_LINES	3
-+
-+
-+/* PCI controller GPIO to IRQ pin mappings */
-+#define NSLU2_PCI_INTA_PIN	11
-+#define NSLU2_PCI_INTB_PIN	10
-+#define NSLU2_PCI_INTC_PIN	9
-+#define NSLU2_PCI_INTD_PIN	8
-+
-+
-+/* NSLU2 Timer */
-+#define NSLU2_FREQ 66000000
-+#define NSLU2_CLOCK_TICK_RATE (((NSLU2_FREQ / HZ & ~IXP4XX_OST_RELOAD_MASK) + 1) * HZ)
-+#define NSLU2_CLOCK_TICKS_PER_USEC ((NSLU2_CLOCK_TICK_RATE + USEC_PER_SEC/2) / USEC_PER_SEC)
-+
-+/* GPIO */
-+
-+#define NSLU2_GPIO0		0
-+#define NSLU2_GPIO1		1
-+#define NSLU2_GPIO2		2
-+#define NSLU2_GPIO3		3
-+#define NSLU2_GPIO4		4
-+#define NSLU2_GPIO5		5
-+#define NSLU2_GPIO6		6
-+#define NSLU2_GPIO7		7
-+#define NSLU2_GPIO8		8
-+#define NSLU2_GPIO9		9
-+#define NSLU2_GPIO10		10
-+#define NSLU2_GPIO11		11
-+#define NSLU2_GPIO12		12
-+#define NSLU2_GPIO13		13
-+#define NSLU2_GPIO14		14
-+#define NSLU2_GPIO15		15
-+
-+/* Buttons */
-+
-+#define NSLU2_PB_GPIO		NSLU2_GPIO5
-+#define NSLU2_PO_GPIO		NSLU2_GPIO8	/* power off */
-+#define NSLU2_RB_GPIO		NSLU2_GPIO12
-+
-+#define NSLU2_PB_IRQ		IRQ_IXP4XX_GPIO5
-+#define NSLU2_RB_IRQ		IRQ_IXP4XX_GPIO12
-+
-+#define NSLU2_PB_BM		(1L << NSLU2_PB_GPIO)
-+#define NSLU2_PO_BM		(1L << NSLU2_PO_GPIO)
-+#define NSLU2_RB_BM		(1L << NSLU2_RB_GPIO)
-+
-+/* Buzzer */
-+
-+#define NSLU2_GPIO_BUZZ		4
-+#define NSLU2_BZ_BM		(1L << NSLU2_GPIO_BUZZ)
-+/* LEDs */
-+
-+#define NSLU2_LED_RED		NSLU2_GPIO0
-+#define NSLU2_LED_GRN		NSLU2_GPIO1
-+
-+#define NSLU2_LED_RED_BM	(1L << NSLU2_LED_RED)
-+#define NSLU2_LED_GRN_BM	(1L << NSLU2_LED_GRN)
-+
-+#define NSLU2_LED_DISK1		NSLU2_GPIO2
-+#define NSLU2_LED_DISK2		NSLU2_GPIO3
-+
-+#define NSLU2_LED_DISK1_BM	(1L << NSLU2_GPIO2)
-+#define NSLU2_LED_DISK2_BM	(1L << NSLU2_GPIO3)
-+
-+
diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6.14/55-nslu2-rtc.patch b/packages/obsolete/nslu2/nslu2-kernel/2.6.14/55-nslu2-rtc.patch
deleted file mode 100644
index be1f696940..0000000000
--- a/packages/obsolete/nslu2/nslu2-kernel/2.6.14/55-nslu2-rtc.patch
+++ /dev/null
@@ -1,125 +0,0 @@
---- linux-2.6.13/.pc/55-nslu2-rtc.patch/arch/arm/mach-ixp4xx/Makefile	2005-10-26 15:19:43.171472071 -0700
-+++ linux-2.6.13/arch/arm/mach-ixp4xx/Makefile	2005-10-26 15:23:52.923187955 -0700
-@@ -8,5 +8,5 @@ obj-$(CONFIG_ARCH_IXDP4XX)	+= ixdp425-pc
- obj-$(CONFIG_MACH_IXDPG425)	+= ixdpg425-pci.o coyote-setup.o
- obj-$(CONFIG_ARCH_ADI_COYOTE)	+= coyote-pci.o coyote-setup.o
- obj-$(CONFIG_MACH_GTWX5715)	+= gtwx5715-pci.o gtwx5715-setup.o
--obj-$(CONFIG_MACH_NSLU2)	+= nslu2-pci.o nslu2-setup.o nslu2-power.o
-+obj-$(CONFIG_MACH_NSLU2)	+= nslu2-pci.o nslu2-setup.o nslu2-power.o nslu2-rtc.o
- 
---- linux-2.6.13/.pc/55-nslu2-rtc.patch/arch/arm/mach-ixp4xx/nslu2-rtc.c	2005-10-26 15:19:43.443489188 -0700
-+++ linux-2.6.13/arch/arm/mach-ixp4xx/nslu2-rtc.c	2005-10-26 15:23:52.923187955 -0700
-@@ -0,0 +1,113 @@
-+/*
-+ * arch/arm/mach-ixp4xx/nslu2-rtc.c
-+ *
-+ * NSLU2 RTC driver
-+ *
-+ * Copyright (C) 2005 Tower Technologies
-+ *
-+ * based on x1205-rtc.c  
-+ *  Copyright (C) 2004 Karen Spearel
-+ *
-+ * Author: Alessandro Zummo <a.zummo@towertech.it>
-+ * Maintainers: http://www.nslu2-linux.org/
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/time.h>
-+#include <linux/rtc.h>
-+#include <linux/init.h>
-+
-+#include <linux/x1205.h>
-+
-+#include <asm/rtc.h>
-+#include <asm/mach-types.h>
-+
-+extern int (*set_rtc)(void);
-+
-+static int nslu2_set_rtc(void)
-+{
-+	struct rtc_time new_tm, old_tm;
-+	unsigned long cur_secs = xtime.tv_sec;
-+
-+	if (x1205_do_command(X1205_CMD_GETDATETIME, &old_tm))
-+		return 0;
-+
-+	/* FIXME      xtime.tv_nsec = old_tm.tm_sec * 10000000; */
-+	new_tm.tm_sec  = cur_secs % 60;
-+	cur_secs /= 60;
-+	new_tm.tm_min  = cur_secs % 60;
-+	cur_secs /= 60;
-+	new_tm.tm_hour = cur_secs % 24;
-+
-+       /*
-+	* avoid writing when we're going to change the day
-+	* of the month.  We will retry in the next minute.
-+	* This basically means that if the RTC must not drift
-+	* by more than 1 minute in 11 minutes.
-+	*/
-+	if ((old_tm.tm_hour == 23 && old_tm.tm_min == 59) ||
-+	    (new_tm.tm_hour == 23 && new_tm.tm_min == 59))
-+		return 1;
-+
-+	return x1205_do_command(X1205_CMD_SETTIME, &new_tm);
-+}
-+
-+static int rtc_read_alarm(struct rtc_wkalrm *alrm)
-+{
-+	return x1205_do_command(X1205_CMD_GETALARM, &alrm->time);
-+}
-+
-+static int rtc_set_alarm(struct rtc_wkalrm *alrm)
-+{
-+	return x1205_do_command(X1205_CMD_SETALARM, &alrm->time);
-+}
-+
-+static int rtc_read_time(struct rtc_time *tm)
-+{
-+	return x1205_do_command(X1205_CMD_GETDATETIME, tm);
-+}
-+
-+static int rtc_set_time(struct rtc_time *tm)
-+{
-+	return x1205_do_command(X1205_CMD_SETDATETIME, tm);
-+}
-+
-+static struct rtc_ops rtc_ops = {
-+	.owner		= THIS_MODULE,
-+	.read_time	= rtc_read_time,
-+	.set_time	= rtc_set_time,
-+	.read_alarm	= rtc_read_alarm,
-+	.set_alarm	= rtc_set_alarm,
-+};
-+
-+static int __init nslu2_rtc_init(void)
-+{
-+	int ret;
-+
-+	if (!(machine_is_nslu2()))
-+		return 0;
-+
-+	printk(KERN_INFO "NSLU2: rtc\n");
-+
-+	if ((ret = register_rtc(&rtc_ops)) != 0)
-+		return ret;
-+
-+	set_rtc = nslu2_set_rtc;
-+
-+	return 0;
-+}
-+
-+static void __exit nslu2_rtc_exit(void)
-+{
-+	set_rtc = NULL;
-+
-+	unregister_rtc(&rtc_ops);
-+}
-+
-+module_init(nslu2_rtc_init);
-+module_exit(nslu2_rtc_exit);
diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6.14/60-nslu2-beeper.patch b/packages/obsolete/nslu2/nslu2-kernel/2.6.14/60-nslu2-beeper.patch
deleted file mode 100644
index e8a037385b..0000000000
--- a/packages/obsolete/nslu2/nslu2-kernel/2.6.14/60-nslu2-beeper.patch
+++ /dev/null
@@ -1,175 +0,0 @@
---- linux-2.6.13/.pc/60-nslu2-beeper.patch/drivers/input/misc/Kconfig	2005-08-28 16:41:01.000000000 -0700
-+++ linux-2.6.13/drivers/input/misc/Kconfig	2005-10-26 15:24:01.199708764 -0700
-@@ -40,6 +40,18 @@ config INPUT_M68K_BEEP
- 	tristate "M68k Beeper support"
- 	depends on M68K
- 
-+config INPUT_NSLU2_BEEPER
-+	tristate "NSLU2 Beeper support"
-+	depends on MACH_NSLU2
-+	help
-+	  Say Y here if you want the embedded beeper on the LinkSys NSLU2
-+	  to be used for bells and whistles.
-+
-+	  If unsure, say Y.
-+
-+	  To compile this driver as a module, choose M here: the
-+	  module will be called nslu2spkr.
-+
- config INPUT_UINPUT
- 	tristate "User level driver support"
- 	help
---- linux-2.6.13/.pc/60-nslu2-beeper.patch/drivers/input/misc/Makefile	2005-08-28 16:41:01.000000000 -0700
-+++ linux-2.6.13/drivers/input/misc/Makefile	2005-10-26 15:24:01.199708764 -0700
-@@ -10,3 +10,4 @@ obj-$(CONFIG_INPUT_M68K_BEEP)		+= m68ksp
- obj-$(CONFIG_INPUT_98SPKR)		+= 98spkr.o
- obj-$(CONFIG_INPUT_UINPUT)		+= uinput.o
- obj-$(CONFIG_HP_SDC_RTC)		+= hp_sdc_rtc.o
-+obj-$(CONFIG_INPUT_NSLU2_BEEPER)	+= nslu2spkr.o
---- linux-2.6.13/.pc/60-nslu2-beeper.patch/drivers/input/misc/nslu2spkr.c	2005-10-26 15:19:43.711506053 -0700
-+++ linux-2.6.13/drivers/input/misc/nslu2spkr.c	2005-10-26 15:24:01.199708764 -0700
-@@ -0,0 +1,144 @@
-+/*
-+ * drivers/input/misc/nslu2spkr.c
-+ *
-+ * NSLU2 Beeper driver
-+ *
-+ * Copyright (C) 2005 Tower Technologies
-+ *
-+ * based on nslu2-io.c  
-+ *  Copyright (C) 2004 Karen Spearel
-+ *
-+ * Author: Alessandro Zummo <a.zummo@towertech.it>
-+ * Maintainers: http://www.nslu2-linux.org/
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/config.h>
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/input.h>
-+#include <linux/delay.h>
-+
-+#include <asm/hardware.h>
-+#include <asm/irq.h>
-+
-+static unsigned int beep_on_startup = 1;
-+module_param(beep_on_startup, bool, 0);
-+MODULE_PARM_DESC(beep_on_startup, "Play a beep on module startup");
-+
-+DEFINE_SPINLOCK(beep_lock);
-+
-+static int nslu2_spkr_event(struct input_dev *dev, unsigned int type, unsigned int code, int value)
-+{
-+	unsigned int count = 0;
-+	unsigned long flags;
-+
-+	if (type != EV_SND)
-+		return -1;
-+
-+	switch (code) {
-+		case SND_BELL:
-+			if (value) value = 1000;
-+		case SND_TONE:
-+			break;
-+		default:
-+			return -1;
-+	}
-+
-+	if (value > 20 && value < 32767)
-+		count = (NSLU2_FREQ / (value*4)) - 1;
-+
-+	spin_lock_irqsave(&beep_lock, flags);
-+
-+	 if (count) {
-+
-+		gpio_line_config(NSLU2_GPIO_BUZZ, IXP4XX_GPIO_OUT);
-+		gpio_line_set(NSLU2_GPIO_BUZZ, IXP4XX_GPIO_LOW);
-+
-+		*IXP4XX_OSRT2 = (count & ~IXP4XX_OST_RELOAD_MASK) | IXP4XX_OST_ENABLE;
-+
-+	} else {
-+
-+		gpio_line_config(NSLU2_GPIO_BUZZ, IXP4XX_GPIO_IN);
-+		gpio_line_set(NSLU2_GPIO_BUZZ, IXP4XX_GPIO_HIGH);
-+
-+		*IXP4XX_OSRT2 = 0;
-+	}
-+
-+	spin_unlock_irqrestore(&beep_lock, flags);
-+
-+	return 0;
-+}
-+
-+static struct input_dev nslu2_spkr_dev = {
-+	.phys		= "ixp420/gpio4",
-+	.name		= "NSLU2 Beeper",
-+	.evbit[0]	= BIT(EV_SND),
-+	.sndbit[0]	= BIT(SND_BELL) | BIT(SND_TONE),
-+	.event		= nslu2_spkr_event,
-+	.id		= {
-+		.bustype	= BUS_HOST,
-+		.vendor		= 0x001f,
-+		.product	= 0x0001,
-+		.version	= 0x0100
-+	}
-+};
-+
-+static irqreturn_t nslu2_spkr_handler(int irq, void *dev_id, struct pt_regs *regs)
-+{
-+	/* clear interrupt */
-+	*IXP4XX_OSST = IXP4XX_OSST_TIMER_2_PEND;
-+
-+	/* flip the beeper output */
-+	*IXP4XX_GPIO_GPOUTR ^= NSLU2_BZ_BM;
-+
-+	return IRQ_HANDLED;
-+}
-+
-+static int __init nslu2_spkr_init(void)
-+{
-+	if (request_irq(IRQ_IXP4XX_TIMER2, &nslu2_spkr_handler,
-+		SA_INTERRUPT | SA_TIMER, "NSLU2 beeper", NULL < 0)) {
-+			
-+		printk(KERN_INFO "NSLU2 beeper: IRQ %d not available\n",
-+			IRQ_IXP4XX_TIMER2);
-+
-+		return -EIO;
-+	}
-+
-+	input_register_device(&nslu2_spkr_dev);
-+
-+	/* do a little beep to tell the world we are alive */
-+	if (beep_on_startup)
-+	{
-+		nslu2_spkr_event(NULL, EV_SND, SND_TONE, 440);
-+		msleep(120);
-+		nslu2_spkr_event(NULL, EV_SND, SND_TONE, 0);
-+	}
-+
-+        printk(KERN_INFO "NSLU2: beeper\n");
-+	return 0;
-+}
-+
-+static void __exit nslu2_spkr_exit(void)
-+{
-+	input_unregister_device(&nslu2_spkr_dev);
-+
-+	disable_irq(IRQ_IXP4XX_TIMER2);
-+
-+	/* turn it off */
-+	nslu2_spkr_event(NULL, EV_SND, SND_BELL, 0);
-+
-+	free_irq(IRQ_IXP4XX_TIMER2, NULL);
-+}
-+
-+module_init(nslu2_spkr_init);
-+module_exit(nslu2_spkr_exit);
-+
-+MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>");
-+MODULE_DESCRIPTION("NSLU2 Beeper driver");
-+MODULE_LICENSE("GPL");
diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6.14/70-nslu2-io.patch b/packages/obsolete/nslu2/nslu2-kernel/2.6.14/70-nslu2-io.patch
deleted file mode 100644
index d3d200e4c4..0000000000
--- a/packages/obsolete/nslu2/nslu2-kernel/2.6.14/70-nslu2-io.patch
+++ /dev/null
@@ -1,560 +0,0 @@
---- linux-2.6.13/.pc/70-nslu2-io.patch/arch/arm/mach-ixp4xx/Makefile	2005-10-26 15:19:43.443489188 -0700
-+++ linux-2.6.13/arch/arm/mach-ixp4xx/Makefile	2005-10-26 15:24:08.652177718 -0700
-@@ -8,5 +8,5 @@ obj-$(CONFIG_ARCH_IXDP4XX)	+= ixdp425-pc
- obj-$(CONFIG_MACH_IXDPG425)	+= ixdpg425-pci.o coyote-setup.o
- obj-$(CONFIG_ARCH_ADI_COYOTE)	+= coyote-pci.o coyote-setup.o
- obj-$(CONFIG_MACH_GTWX5715)	+= gtwx5715-pci.o gtwx5715-setup.o
--obj-$(CONFIG_MACH_NSLU2)	+= nslu2-pci.o nslu2-setup.o nslu2-power.o nslu2-rtc.o
-+obj-$(CONFIG_MACH_NSLU2)	+= nslu2-pci.o nslu2-setup.o nslu2-power.o nslu2-rtc.o nslu2-io.o
- 
---- linux-2.6.13/.pc/70-nslu2-io.patch/arch/arm/mach-ixp4xx/nslu2-io.c	2005-10-26 15:19:43.979522918 -0700
-+++ linux-2.6.13/arch/arm/mach-ixp4xx/nslu2-io.c	2005-10-26 15:24:08.652177718 -0700
-@@ -0,0 +1,548 @@
-+//=============================================================================
-+//
-+// n2-io.c version 0.1.7
-+// Author: Karen Spearel <kas11 at tampabay.rr.com>
-+// please report problems/bugs directly to the address above
-+//
-+// Boilerplate to be added "real soon now"...it is and has always been GPL'ed per
-+// MODULE_LICENSE but is offered without warrantee of any sort..use at your own risk
-+//
-+// NOTE: THIS IS INCOMPLETE.  INCLUDED ONLY TO KEEP FROM BREAKING THE BUILD,
-+// IT BEEPS AND SENDS A MESSAGE TO /proc/poweroff.  EVENTUALLY IT
-+// WILL TALK TO THE n2_pbd DAEMON.  EVENTUALLY THE LED DRIVER
-+// WILL TALK TO SOME USERLAND APP BUT ***NOT*** SET_LEDS.
-+// 
-+//=============================================================================
-+//	GPIO		Function	State
-+//	0		Red LED		Status		
-+//	1		Green LED	Ready = 1
-+//	2		Disk 2 LED	On = 0
-+//	3		Disk 1 LED	On = 0
-+//	4		Buzzer
-+//	5		Power Button	Pressed = 1
-+//	8		Power Down	Output = 1 powers down NSLU2
-+//	12		Reset		Pressed = 0
-+
-+#include <linux/config.h>
-+#include <linux/version.h>
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/proc_fs.h>
-+#include <linux/device.h>
-+#include <linux/reboot.h>
-+
-+#include <asm/uaccess.h>
-+#include <asm-arm/irq.h>
-+#include <asm-arm/delay.h>
-+
-+/* Set this to 1 to output lots of debug messages. */
-+#define NSLU2_IO_DEBUG 0
-+
-+#if NSLU2_IO_DEBUG
-+#define nslu2_io_debug(args) printk args
-+#else
-+#define nslu2_io_debug(args) ((void)0)
-+#endif
-+
-+#define VERSION			"0.1.7"
-+
-+#define	NSLU2BZ_MAJOR		62		//buzzer
-+#define NSLU2LM_MAJOR		126
-+
-+
-+#define NSLU2_BEEP_DUR_LONG	2000
-+#define NSLU2_BEEP_DUR_MED	400
-+#define NSLU2_BEEP_DUR_SHORT	100
-+#define NSLU2_BEEP_PITCH_HIGH	250
-+#define NSLU2_BEEP_PITCH_MED	500
-+#define NSLU2_BEEP_PITCH_LOW	1000
-+#define NSLU2_LONG_DELAY	30000
-+
-+#define NSLU2_BZ_BM		(1L << NSLU2_GPIO_BUZZ)
-+
-+// ioctls -- 'M" is used for sound cards...we don't got one so it seems safe
-+
-+#define NSLU2BZ_BEEP_STOP		_IO('M',0)       //stop multi-beep at end of audible
-+#define NSLU2BZ_BEEP		_IO('M',1)       //one beep at current defaults
-+#define NSLU2BZ_BEEPS		_IOW('M',3,long) //param beeps at current defaults
-+#define NSLU2BZ_TONESET		_IOW('M',4,long) //set tone: range is high=250 to low=2000
-+#define NSLU2BZ_ONTIME		_IOW('M',5,long) //ontime for multi-beeps in jiffies
-+#define	NSLU2BZ_SILENTTIME		_IOW('M',6,long) //offtime for multi-beeps in jiffies
-+#define NSLU2BZ_REPEATCNT		_IOW('M',7,long) //number of repeats for multi-beeps 0 = forever
-+#define NSLU2BZ_COMBINED		_IOW('M',8,long) //combine all params in a long
-+
-+#define NSLU2LM_OFF		_IOW('M',32,long)
-+#define NSLU2LM_ON			_IOW('M',33,long)
-+#define NSLU2LM_BLINK		_IOW('M',34,long)
-+#define NSLU2LM_ALT		_IOW('M',35,long)
-+#define NSLU2LM_ALL_ON		_IO('M',36)
-+#define NSLU2LM_ALL_OFF		_IO('M',37)
-+
-+#define PHYS_LEDS		4
-+#define BLINK_DELAY		25
-+
-+//  OR Masks to turn these LEDs ON
-+
-+#define	RS_RED_ON	0x00000001	//0b0000 0000 0000 0010
-+#define	RS_GRN_ON	0x00000002	//0b0000 0000 0000 0001
-+#define RS_YEL_ON	0x00000003	//0b0000 0000 0000 0011
-+
-+// AND Masks to turn these LEDs OFF
-+
-+#define	RS_RED_OFF	0xfffffffe	//0b1111 1111 1111 1101
-+#define	RS_GRN_OFF	0xfffffffd	//0b1111 1111 1111 1110
-+#define RS_YEL_OFF	0xfffffffc	//0b1111 1111 1111 1100
-+
-+// AND Masks to turn these LEDs ON
-+
-+#define DISK1_ON	0xfffffff7	//0b1111 1111 1111 0111
-+#define	DISK2_ON	0xfffffffb	//0b1111 1111 1111 1011
-+
-+// Or Masks to turn these LEDs OFF
-+
-+#define DISK1_OFF	0x00000008	//0b0000 0000 0000 1000
-+#define	DISK2_OFF	0x00000004	//0b0000 0000 0000 0100	
-+
-+// EOR masks for toggling LEDs on/off
-+
-+#define RS_RG_ALT	0x00000003	//eor mask to toggle rs rg bits
-+#define RS_GRN_TGL	0x00000002
-+#define RS_RED_TGL	0x00000001
-+#define DISK1_TGL	0x00000008
-+#define DISK2_TGL	0x00000004
-+
-+// The LED names for switches
-+
-+#define LED_RS_RED	0
-+#define LED_RS_GRN	1
-+#define	LED_DISK1	2
-+#define LED_DISK2	3
-+#define LED_ALL		4
-+
-+static unsigned long ontime = 50;
-+static unsigned long offtime = 450;
-+static unsigned long bz_repeatcnt = 10;
-+static unsigned long tone = 1000;
-+
-+static struct timer_list n2lm_rsg_timer;	//rs green 
-+static struct timer_list n2lm_rsr_timer;	//rs red
-+static struct timer_list n2lm_d1_timer;		//drive 1
-+static struct timer_list n2lm_d2_timer;		//drive 2
-+static struct timer_list n2bz_timer;		//beeper
-+
-+// sysfs class
-+static struct class *n2lm_class;
-+
-+//==================================================================================================
-+//
-+// Blinking is handled entirely by the 4 timer handlers.  On timeout, the bit in the
-+// GPIO output register is xor'd with a mask corresponding to the selected led which simply
-+// flips that bit.  No record of what any of the other leds is doing is needed.
-+//
-+//==================================================================================================
-+// this blinks rs green or green/yellow if rs red is on
-+#ifndef CONFIG_LEDS
-+static void n2lm_rsg_handler(unsigned long data)
-+{
-+	*IXP4XX_GPIO_GPOUTR ^= RS_GRN_TGL;			//flip the led
-+	n2lm_rsg_timer.expires = jiffies + BLINK_DELAY;		//next timeout
-+	add_timer(&n2lm_rsg_timer);				//reinit timer
-+	return;
-+}
-+
-+// this blinks or alternates rs red green... inited wit green on/red off
-+static void n2lm_rsr_handler(unsigned long data)
-+{
-+	*IXP4XX_GPIO_GPOUTR ^= n2lm_rsr_timer.data;
-+	n2lm_rsr_timer.expires = jiffies + BLINK_DELAY;
-+	add_timer(&n2lm_rsr_timer);
-+	return;	
-+}
-+// blinks disk 1
-+static void n2lm_d1_handler(unsigned long data)
-+{
-+	*IXP4XX_GPIO_GPOUTR ^= DISK1_TGL;
-+	n2lm_d1_timer.expires = jiffies + BLINK_DELAY;
-+	add_timer(&n2lm_d1_timer);
-+	return;
-+}
-+// blinks disk 2
-+static void n2lm_d2_handler(unsigned long data)
-+{
-+	*IXP4XX_GPIO_GPOUTR ^= DISK2_TGL;
-+	n2lm_d2_timer.expires = jiffies + BLINK_DELAY;
-+	add_timer(&n2lm_d2_timer);
-+	return;
-+}
-+
-+//==================================================================================================
-+
-+static void n2lm_timer_start(unsigned long led)
-+{
-+
-+	nslu2_io_debug((KERN_DEBUG "timer: %ld\n",led));
-+
-+	switch(led) {
-+		case LED_RS_RED:
-+			n2lm_rsr_timer.expires = jiffies + BLINK_DELAY;
-+			add_timer(&n2lm_rsr_timer);
-+			break;
-+
-+		case LED_RS_GRN:
-+			n2lm_rsg_timer.expires = jiffies + BLINK_DELAY;
-+			add_timer(&n2lm_rsg_timer);
-+			break;
-+
-+		case LED_DISK1:
-+			n2lm_d1_timer.expires = jiffies + BLINK_DELAY;
-+			add_timer(&n2lm_d1_timer);
-+ 			break;
-+
-+		case LED_DISK2:
-+			n2lm_d2_timer.expires = jiffies + BLINK_DELAY; 
-+			add_timer(&n2lm_d2_timer);
-+			break;
-+
-+		default:
-+			break;
-+	}
-+	return;
-+}
-+
-+//==================================================================================================
-+
-+static void n2lm_timer_stop(unsigned long led)
-+{
-+	switch (led) {
-+		case LED_RS_RED:
-+			del_timer(&n2lm_rsr_timer);
-+			break;
-+		case LED_RS_GRN:
-+			del_timer(&n2lm_rsg_timer);
-+			break;
-+		case LED_DISK1:
-+			del_timer(&n2lm_d1_timer);
-+ 			break;
-+		case LED_DISK2: 
-+			del_timer(&n2lm_d2_timer);
-+			break;
-+		default:
-+			break;
-+	}
-+	return;
-+}
-+
-+//--------------------------------------------------------------------------------------------------
-+
-+static void n2lm_timer_stop_all(void)
-+{
-+	del_timer(&n2lm_rsg_timer);
-+	del_timer(&n2lm_rsr_timer);
-+	del_timer(&n2lm_d1_timer); 
-+	del_timer(&n2lm_d2_timer);
-+	return;
-+}
-+//--------------------------------------------------------------------------------------------------
-+
-+static void n2lm_ledon(unsigned long led)
-+{
-+
-+	nslu2_io_debug((KERN_DEBUG "ledon: %ld\n", led));
-+
-+	switch (led) {
-+		case LED_RS_RED:	
-+			*IXP4XX_GPIO_GPOUTR |= RS_RED_ON;	//1
-+			return;
-+		case LED_RS_GRN:
-+			*IXP4XX_GPIO_GPOUTR |= RS_GRN_ON;	//2
-+			return;
-+		case LED_DISK1:
-+			*IXP4XX_GPIO_GPOUTR &= DISK1_ON;	//0xfffffff7
-+			return;
-+		case LED_DISK2:	
-+			*IXP4XX_GPIO_GPOUTR &= DISK2_ON;	//0xfffffffb
-+			return;
-+		case LED_ALL:					//all green
-+			*IXP4XX_GPIO_GPOUTR |= RS_GRN_ON;
-+			*IXP4XX_GPIO_GPOUTR &= (DISK1_ON & DISK2_ON);
-+			return;	
-+	}
-+}
-+
-+//--------------------------------------------------------------------------------------------------
-+
-+static void n2lm_ledoff(unsigned long led)
-+{
-+
-+	switch (led) {
-+		case LED_RS_RED:	
-+			*IXP4XX_GPIO_GPOUTR &= RS_RED_OFF;	//0xffffffffe
-+			return;
-+		case LED_RS_GRN:
-+			*IXP4XX_GPIO_GPOUTR &= RS_GRN_OFF;	//0xfffffffd
-+			return;
-+		case LED_DISK1:
-+			*IXP4XX_GPIO_GPOUTR |= DISK1_OFF;	//0x00000008
-+			return;
-+		case LED_DISK2:	
-+			*IXP4XX_GPIO_GPOUTR |= DISK2_OFF;	//0x00000004
-+			return;
-+		case LED_ALL:
-+			*IXP4XX_GPIO_GPOUTR &= (RS_GRN_OFF & RS_RED_OFF);
-+			*IXP4XX_GPIO_GPOUTR |= (DISK1_OFF | DISK2_OFF);
-+	}
-+}
-+
-+//==================================================================================================
-+
-+static int n2lm_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long led)
-+{
-+
-+	nslu2_io_debug((KERN_DEBUG "cmd=%d, led=%ld\n", cmd, led));
-+	
-+	if (led < 0 || led >= PHYS_LEDS)
-+		return -EINVAL;
-+
-+	switch (cmd ) {
-+		case NSLU2LM_ON:
-+			n2lm_timer_stop(led);
-+			n2lm_ledon(led);
-+			break;
-+			
-+		case NSLU2LM_OFF:
-+			n2lm_timer_stop(led);
-+			n2lm_ledoff(led);
-+			break;
-+			
-+		case NSLU2LM_BLINK:
-+			n2lm_ledon(led);
-+			if (led == LED_RS_RED)
-+				n2lm_rsr_timer.data = RS_RED_TGL;
-+			n2lm_timer_start(led);
-+			break;
-+
-+		case NSLU2LM_ALT:
-+			if (led == LED_RS_RED)
-+			{
-+				n2lm_ledon(LED_RS_GRN);
-+				n2lm_ledoff(LED_RS_RED);
-+				n2lm_rsr_timer.data = RS_RG_ALT;
-+				n2lm_timer_start(LED_RS_RED);
-+				break;
-+			} else
-+				return -EINVAL;
-+		
-+		case NSLU2LM_ALL_ON:
-+			n2lm_timer_stop_all();
-+			n2lm_ledon(LED_ALL);
-+			break;
-+		
-+		case NSLU2LM_ALL_OFF:
-+			n2lm_timer_stop_all();
-+			n2lm_ledoff(LED_ALL);
-+			break;
-+		
-+		default:
-+			return -EINVAL;
-+	}
-+
-+	return 0;
-+}
-+
-+static struct file_operations n2lm_fops = {
-+	.owner		= THIS_MODULE,
-+	.ioctl		= n2lm_ioctl,
-+};
-+#endif
-+//==================================================================================================
-+// We can't do anything fancy here since the system tick rate is far below that required to
-+// generate a desirable tone.  Therefore we haven't much choice but to use a busy loop until
-+// I get up to speed on the timers.  The saving grace is that for the normal uses, nothing 
-+// important should be haprepening. 
-+//==================================================================================================
-+
-+static void n2_buzz(int tone_delay, int duration)
-+{
-+	int i;
-+
-+	*IXP4XX_GPIO_GPOER &= ~NSLU2_BZ_BM;
-+		
-+	for (i = 1; i < duration; i++) {
-+		*IXP4XX_GPIO_GPOUTR &= ~NSLU2_BZ_BM;
-+		udelay(tone_delay);
-+		*IXP4XX_GPIO_GPOUTR |= NSLU2_BZ_BM;
-+		udelay(tone_delay);
-+	}
-+	*IXP4XX_GPIO_GPOER |= NSLU2_BZ_BM;
-+
-+	return;
-+}
-+//=================================================================================================
-+
-+// this handles the buzzer duty cycle
-+static void n2bz_handler(unsigned long data)
-+{
-+	if (--bz_repeatcnt > 0) {			//if just one beep left to do
-+		n2bz_timer.expires = jiffies + ontime + offtime;	//next timeout
-+		add_timer(&n2bz_timer);					//reinit timer
-+	}
-+	n2_buzz(tone/2, ontime);
-+	nslu2_io_debug((KERN_DEBUG "Count = %d\tOntime = %d\n", bz_repeatcnt, ontime));
-+	return;
-+}
-+
-+//==================================================================================================
-+
-+static int n2bz_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long param)
-+{
-+	switch (cmd) {
-+		case NSLU2BZ_BEEP:
-+			n2_buzz(tone/2, ontime);
-+			break;
-+	
-+		case NSLU2BZ_BEEP_STOP:
-+			del_timer(&n2bz_timer);
-+			break;
-+
-+		case NSLU2BZ_BEEPS:
-+			if (param == 0)
-+				bz_repeatcnt = 0xffffffff;
-+			else
-+				bz_repeatcnt = param;
-+			n2bz_handler(0);
-+			break;
-+	
-+		case NSLU2BZ_TONESET:
-+			if (param >= 250 && param <= 2000)
-+				tone = param;
-+			break;
-+
-+		case NSLU2BZ_ONTIME:
-+			if (param > 4 && param < 201)
-+				ontime = param;
-+			break;
-+
-+		case NSLU2BZ_SILENTTIME:
-+			if (param > ontime)			//enforce a reasonable duty cycle
-+				offtime = param;
-+			else
-+				offtime = ontime;
-+			break;
-+
-+		case NSLU2BZ_REPEATCNT:
-+			if (param == 0)
-+				bz_repeatcnt = 0xffffffff;
-+			else
-+				bz_repeatcnt = param;
-+			break;
-+
-+		case NSLU2BZ_COMBINED:
-+			bz_repeatcnt =  (param & 0xF0000000) >> 28;	//repeat 1 - 16
-+			ontime =        (param & 0x0FF00000) >> 20; 	//ontime 1 - 256 jiffies
-+			offtime =       (param & 0x000FFF00) >> 8;	//offtime 1 - 4095 jiffies
-+			tone =          (param & 0x000000FF) << 4;	//tone (1 - 255) * 16
-+			break;
-+
-+		default:
-+			break;
-+	}
-+	return 0;
-+}
-+
-+static struct file_operations n2bz_fops = {
-+	.owner		= THIS_MODULE,
-+	.ioctl		= n2bz_ioctl,
-+};
-+
-+static void n2iom_initarch(void)
-+{
-+#ifndef CONFIG_LEDS
-+	init_timer(&n2lm_rsg_timer);
-+	init_timer(&n2lm_rsr_timer);
-+	init_timer(&n2lm_d1_timer);
-+	init_timer(&n2lm_d2_timer);
-+
-+	n2lm_rsr_timer.function = n2lm_rsr_handler;
-+	n2lm_rsg_timer.function = n2lm_rsg_handler;
-+	n2lm_d2_timer.function = n2lm_d2_handler;
-+	n2lm_d1_timer.function = n2lm_d1_handler;
-+#endif
-+
-+	init_timer(&n2bz_timer);
-+	n2bz_timer.function = n2bz_handler;
-+
-+	n2lm_rsr_timer.data = n2lm_rsg_timer.data = n2lm_d1_timer.data = n2lm_d2_timer.data = n2bz_timer.data = 0;
-+
-+#ifndef CONFIG_LEDS
-+	*IXP4XX_GPIO_GPOER &= 0xfffffff0;	//enable gpio 0-3
-+	*IXP4XX_GPIO_GPOUTR |= 0x00000003;	//turn off the leds
-+	*IXP4XX_GPIO_GPOUTR &= 0xfffffffc;
-+	n2lm_ledon(LED_ALL);
-+	n2_buzz(NSLU2_BEEP_PITCH_MED, NSLU2_BEEP_DUR_SHORT);
-+	n2lm_ledoff(LED_ALL);
-+
-+	// Default the Ready/Status to Red during kernel boot, Turn Green at the end of sysvinit
-+	n2lm_ledon(LED_RS_RED);
-+#endif
-+
-+	return;
-+}
-+
-+//==================================================================================================
-+
-+static int __init n2iom_init(void)
-+{
-+	printk(KERN_INFO "NSLU2: i/o, %s\n", VERSION);
-+  	
-+	n2iom_initarch();
-+
-+	n2lm_class = class_create(THIS_MODULE, "nslu2");
-+
-+#ifndef CONFIG_LEDS
-+	if (register_chrdev(NSLU2LM_MAJOR, "n2_ledm", &n2lm_fops) < 0) {
-+		printk(KERN_DEBUG "Led Manager Major %d not available\n", NSLU2LM_MAJOR);
-+		return -EBUSY;
-+	}
-+	else {
-+		class_device_create(n2lm_class, MKDEV(NSLU2LM_MAJOR, 0), NULL, "leds");
-+	}
-+#endif
-+
-+	if (register_chrdev(NSLU2BZ_MAJOR, "n2_bzm", &n2bz_fops) < 0) {
-+		printk(KERN_DEBUG "Buzzer Major %d not available\n", NSLU2BZ_MAJOR);
-+		return -EBUSY;
-+	}
-+	else {
-+		class_device_create(n2lm_class, MKDEV(NSLU2BZ_MAJOR, 0), NULL, "buzzer");
-+	}
-+
-+	return 0;
-+}
-+
-+//==================================================================================================
-+
-+static void __exit n2iom_exit(void)
-+{
-+
-+#ifndef CONFIG_LEDS
-+	del_timer(&n2lm_rsg_timer);
-+	del_timer(&n2lm_rsr_timer);
-+	del_timer(&n2lm_d1_timer);
-+	del_timer(&n2lm_d2_timer);	
-+
-+	unregister_chrdev(NSLU2LM_MAJOR, "n2lm" );
-+	class_device_destroy(n2lm_class, MKDEV(NSLU2LM_MAJOR, 0));
-+#endif
-+
-+	unregister_chrdev(NSLU2BZ_MAJOR, "n2bz");
-+	class_device_destroy(n2lm_class, MKDEV(NSLU2BZ_MAJOR, 0));
-+
-+	class_destroy(n2lm_class);
-+}
-+
-+module_init(n2iom_init);
-+module_exit(n2iom_exit);
-+
-+MODULE_AUTHOR("Karen Spearel <kas11@tampabay.rr.com>");
-+MODULE_DESCRIPTION("NSLU2 I/O driver");
-+MODULE_LICENSE("GPL");
diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6.14/75-nslu2-leds.patch b/packages/obsolete/nslu2/nslu2-kernel/2.6.14/75-nslu2-leds.patch
deleted file mode 100644
index 2701c012f3..0000000000
--- a/packages/obsolete/nslu2/nslu2-kernel/2.6.14/75-nslu2-leds.patch
+++ /dev/null
@@ -1,267 +0,0 @@
---- linux-2.6.13/.pc/75-nslu2-leds.patch/arch/arm/Kconfig	2005-10-26 15:19:34.490925838 -0700
-+++ linux-2.6.13/arch/arm/Kconfig	2005-10-26 15:24:18.628805508 -0700
-@@ -389,7 +389,8 @@ config LEDS
- 		   ARCH_EBSA285 || ARCH_IMX || ARCH_INTEGRATOR || \
- 		   ARCH_LUBBOCK || MACH_MAINSTONE || ARCH_NETWINDER || \
- 		   ARCH_OMAP || ARCH_P720T || ARCH_PXA_IDP || \
--		   ARCH_SA1100 || ARCH_SHARK || ARCH_VERSATILE
-+		   ARCH_SA1100 || ARCH_SHARK || ARCH_VERSATILE || \
-+		   MACH_NSLU2
- 	help
- 	  If you say Y here, the LEDs on your machine will be used
- 	  to provide useful information about your current system status.
-@@ -403,7 +404,7 @@ config LEDS
- 
- config LEDS_TIMER
- 	bool "Timer LED" if (!ARCH_CDB89712 && !ARCH_OMAP) || \
--			    MACH_OMAP_H2 || MACH_OMAP_PERSEUS2
-+			    MACH_OMAP_H2 || MACH_OMAP_PERSEUS2 || MACH_NSLU2
- 	depends on LEDS
- 	default y if ARCH_EBSA110
- 	help
-@@ -419,7 +420,8 @@ config LEDS_TIMER
- 
- config LEDS_CPU
- 	bool "CPU usage LED" if (!ARCH_CDB89712 && !ARCH_EBSA110 && \
--			!ARCH_OMAP) || MACH_OMAP_H2 || MACH_OMAP_PERSEUS2
-+			!ARCH_OMAP) || MACH_OMAP_H2 || MACH_OMAP_PERSEUS2 \
-+			|| MACH_NSLU2
- 	depends on LEDS
- 	help
- 	  If you say Y here, the red LED will be used to give a good real
---- linux-2.6.13/.pc/75-nslu2-leds.patch/arch/arm/mach-ixp4xx/Makefile	2005-10-26 15:19:43.979522918 -0700
-+++ linux-2.6.13/arch/arm/mach-ixp4xx/Makefile	2005-10-26 15:24:18.632805759 -0700
-@@ -10,3 +10,7 @@ obj-$(CONFIG_ARCH_ADI_COYOTE)	+= coyote-
- obj-$(CONFIG_MACH_GTWX5715)	+= gtwx5715-pci.o gtwx5715-setup.o
- obj-$(CONFIG_MACH_NSLU2)	+= nslu2-pci.o nslu2-setup.o nslu2-power.o nslu2-rtc.o nslu2-io.o
- 
-+leds-$(CONFIG_MACH_NSLU2)	+= nslu2-leds.o
-+obj-$(CONFIG_LEDS)		+= $(leds-y)
-+
-+
---- linux-2.6.13/.pc/75-nslu2-leds.patch/arch/arm/mach-ixp4xx/nslu2-leds.c	2005-10-26 15:19:44.251540035 -0700
-+++ linux-2.6.13/arch/arm/mach-ixp4xx/nslu2-leds.c	2005-10-26 15:24:18.632805759 -0700
-@@ -0,0 +1,223 @@
-+/*
-+ * arch/arm/mach-ixp4xx/nslu2-leds.c
-+ *
-+ * NSLU2 LEDs driver
-+ *
-+ * Copyright (C) 2005 Tower Technologies
-+ *
-+ * based on nslu2-io.c  
-+ *  Copyright (C) 2004 Karen Spearel
-+ * and arch/arm/mach-footbridge/netwinder-leds.c
-+ *  Copyright (C) 1998-1999 Russell King 
-+ *
-+ * Author: Alessandro Zummo <a.zummo@towertech.it>
-+ * Maintainers: http://www.nslu2-linux.org/
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/config.h>
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/spinlock.h>
-+#include <linux/notifier.h>
-+
-+#include <asm/hardware.h>
-+#include <asm/leds.h>
-+#include <asm/mach-types.h>
-+#include <asm/system.h>
-+
-+#define LED_STATE_ENABLED	0x01
-+#define LED_STATE_CLAIMED	0x02
-+#define LED_STATE_IDLE		0x04
-+
-+static unsigned char led_state;
-+static unsigned int hw_led_state;
-+
-+static const unsigned long idle_seq[4] = {
-+	
-+	NSLU2_LED_GRN_BM, 0,
-+	NSLU2_LED_GRN_BM, 0,
-+};
-+
-+static const unsigned long busy_seq[4] = {
-+
-+	NSLU2_LED_GRN_BM, 0,
-+	NSLU2_LED_GRN_BM | NSLU2_LED_RED_BM, 0,
-+};
-+
-+static unsigned char led_count = 0;
-+
-+static DEFINE_SPINLOCK(leds_lock);
-+extern spinlock_t gpio_lock;
-+
-+static void nslu2_leds_event(led_event_t evt)
-+{
-+	unsigned long flags;
-+
-+	spin_lock_irqsave(&leds_lock, flags);
-+
-+	switch (evt) {
-+	case led_start:
-+		/* Let's rock! Red led on, all others off. Remember
-+		 * that disk1/disk2 works inverted. On the NSLU2, the
-+		 * interface starts in a claimed state. XXX
-+		 */
-+		led_state = LED_STATE_ENABLED | LED_STATE_CLAIMED;
-+		hw_led_state = NSLU2_LED_DISK1_BM | NSLU2_LED_DISK2_BM
-+				| NSLU2_LED_RED_BM;
-+		break;
-+
-+	case led_stop:
-+		led_state &= ~LED_STATE_ENABLED;
-+		break;
-+
-+	case led_claim:
-+		/* The user claimed the interface, red and green off */
-+		led_state |= LED_STATE_CLAIMED;
-+		hw_led_state &= ~(NSLU2_LED_RED_BM | NSLU2_LED_GRN_BM);
-+		break;
-+
-+	case led_release:
-+		/* The user released the interface, preserve the last
-+		 * status of the leds, except red/green.
-+		 */
-+		led_state &= ~LED_STATE_CLAIMED;
-+		hw_led_state = *IXP4XX_GPIO_GPOUTR & 0x0000000C;
-+		break;
-+
-+#ifdef CONFIG_LEDS_TIMER
-+	case led_timer:
-+		/* Pulse green led */
-+		if (!(led_state & LED_STATE_CLAIMED))
-+		{
-+			/* clear red and green bits */
-+			hw_led_state &= ~(NSLU2_LED_RED_BM | NSLU2_LED_GRN_BM);
-+
-+			/* copy the right sequence in */
-+			if (led_state & LED_STATE_IDLE)
-+				hw_led_state |= idle_seq[led_count % 4];
-+			else
-+				hw_led_state |= busy_seq[led_count % 4];
-+
-+			led_count++;
-+		}
-+		break;
-+#endif
-+
-+#ifdef CONFIG_LEDS_CPU
-+
-+	case led_idle_start:
-+		led_state |= LED_STATE_IDLE;
-+#ifndef CONFIG_LEDS_TIMER
-+		/* green on, red off */
-+		hw_led_state |= NSLU2_LED_GRN_BM;
-+		hw_led_state &= ~NSLU2_LED_RED_BM;
-+#endif
-+		break;
-+
-+	case led_idle_end:
-+		led_state &= ~LED_STATE_IDLE;
-+#ifndef CONFIG_LEDS_TIMER
-+		/* green on, red on -> amber on */
-+		hw_led_state |= NSLU2_LED_GRN_BM | NSLU2_LED_RED_BM;
-+#endif
-+		break;
-+#endif
-+
-+	case led_halted:
-+		if (!(led_state & LED_STATE_CLAIMED))
-+			hw_led_state |= NSLU2_LED_RED_BM;
-+		break;
-+
-+	/* leds */
-+
-+	case led_green_on:
-+		if (led_state & LED_STATE_CLAIMED)
-+			hw_led_state |= NSLU2_LED_GRN_BM;
-+		break;
-+
-+	case led_green_off:
-+		if (led_state & LED_STATE_CLAIMED)
-+			hw_led_state &= ~NSLU2_LED_GRN_BM;
-+		break;
-+
-+	case led_amber_on:
-+		if (led_state & LED_STATE_CLAIMED)
-+			hw_led_state |= (NSLU2_LED_RED_BM | NSLU2_LED_GRN_BM);
-+		break;
-+
-+	case led_amber_off:
-+		if (led_state & LED_STATE_CLAIMED)
-+			hw_led_state &= ~(NSLU2_LED_RED_BM | NSLU2_LED_GRN_BM);
-+		break;
-+
-+	case led_red_on:
-+		if (led_state & LED_STATE_CLAIMED)
-+			hw_led_state |= NSLU2_LED_RED_BM;
-+		break;
-+
-+	case led_red_off:
-+		if (led_state & LED_STATE_CLAIMED)
-+			hw_led_state &= ~NSLU2_LED_RED_BM;
-+		break;
-+
-+	default:
-+		break;
-+	}
-+
-+	spin_unlock_irqrestore(&leds_lock, flags);
-+
-+	if  (led_state & LED_STATE_ENABLED) {
-+		spin_lock_irqsave(&gpio_lock, flags);
-+		*IXP4XX_GPIO_GPOUTR = (*IXP4XX_GPIO_GPOUTR & 0xFFFFFFF0) | hw_led_state;
-+		spin_unlock_irqrestore(&gpio_lock, flags);
-+	}
-+}
-+
-+static int nslu2_leds_panic_event(struct notifier_block *this, unsigned long event,
-+	void *ptr)
-+{
-+	leds_event(led_green_off);
-+	leds_event(led_red_on);
-+
-+	return NOTIFY_DONE;
-+}
-+
-+static struct notifier_block nslu2_leds_panic_block = {
-+	.notifier_call	= nslu2_leds_panic_event,
-+};
-+
-+static int __init nslu2_leds_init(void)
-+{
-+	if (!(machine_is_nslu2()))
-+		return 0;
-+
-+	printk(KERN_INFO "NSLU2: leds\n");
-+
-+	/* register panic notifier */
-+	notifier_chain_register(&panic_notifier_list, &nslu2_leds_panic_block);
-+
-+	/* enable gpio 0-3 */
-+	gpio_line_config(NSLU2_LED_GRN, IXP4XX_GPIO_OUT);
-+	gpio_line_config(NSLU2_LED_RED, IXP4XX_GPIO_OUT);
-+	gpio_line_config(NSLU2_LED_DISK1, IXP4XX_GPIO_OUT);
-+	gpio_line_config(NSLU2_LED_DISK2, IXP4XX_GPIO_OUT);
-+
-+	leds_event = nslu2_leds_event;
-+
-+	/* this will also initialize the leds to the
-+	 * default state.
-+	 */
-+
-+	leds_event(led_start);
-+
-+	return 0;
-+}
-+
-+module_init(nslu2_leds_init);
-+
diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6.14/90-ixp4xx-pci-le.patch b/packages/obsolete/nslu2/nslu2-kernel/2.6.14/90-ixp4xx-pci-le.patch
deleted file mode 100644
index 1a37b13a79..0000000000
--- a/packages/obsolete/nslu2/nslu2-kernel/2.6.14/90-ixp4xx-pci-le.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- linux-2.6.13/.pc/90-ixp4xx-pci-le.patch/arch/arm/mach-ixp4xx/common-pci.c	2005-08-28 16:41:01.000000000 -0700
-+++ linux-2.6.13/arch/arm/mach-ixp4xx/common-pci.c	2005-10-26 15:24:30.337542292 -0700
-@@ -427,7 +427,7 @@ void __init ixp4xx_pci_preinit(void)
- #ifdef __ARMEB__
- 	*PCI_CSR = PCI_CSR_IC | PCI_CSR_ABE | PCI_CSR_PDS | PCI_CSR_ADS;
- #else
--	*PCI_CSR = PCI_CSR_IC;
-+	*PCI_CSR = PCI_CSR_IC | PCI_CSR_ABE;
- #endif
- 
- 	pr_debug("DONE\n");
diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6.14/90-pegasus.patch b/packages/obsolete/nslu2/nslu2-kernel/2.6.14/90-pegasus.patch
deleted file mode 100644
index ab80672135..0000000000
--- a/packages/obsolete/nslu2/nslu2-kernel/2.6.14/90-pegasus.patch
+++ /dev/null
@@ -1,13 +0,0 @@
-*** linux-2.6.13/drivers/usb/net/pegasus.h.orig	Mon Aug 29 01:41:01 2005
---- linux-2.6.13/drivers/usb/net/pegasus.h	Sat Oct 22 20:51:29 2005
-***************
-*** 181,186 ****
---- 181,188 ----
-  		DEFAULT_GPIO_RESET )
-  PEGASUS_DEV( "SpeedStream USB 10/100 Ethernet", VENDOR_ACCTON, 0x5046,
-  		DEFAULT_GPIO_RESET | PEGASUS_II )
-+ PEGASUS_DEV( "Philips CPWUE01/00 USB 10/100 Ethernet", VENDOR_ACCTON, 0xb004,
-+ 		DEFAULT_GPIO_RESET | PEGASUS_II )
-  PEGASUS_DEV( "ADMtek ADM8511 \"Pegasus II\" USB Ethernet",
-  		VENDOR_ADMTEK, 0x8511,
-  		DEFAULT_GPIO_RESET | PEGASUS_II | HAS_HOME_PNA )
diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6.14/defconfig b/packages/obsolete/nslu2/nslu2-kernel/2.6.14/defconfig
deleted file mode 100644
index 83b25213ac..0000000000
--- a/packages/obsolete/nslu2/nslu2-kernel/2.6.14/defconfig
+++ /dev/null
@@ -1,1556 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14
-# Mon Nov 28 18:53:25 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_EMBEDDED=y
-# CONFIG_KALLSYMS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-# CONFIG_BASE_FULL is not set
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=1
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_CAMELOT is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-CONFIG_ARCH_IXP4XX=y
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_AAEC2000 is not set
-CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
-
-#
-# Intel IXP4xx Implementation Options
-#
-
-#
-# IXP4xx Platforms
-#
-CONFIG_MACH_NSLU2=y
-# CONFIG_ARCH_AVILA is not set
-# CONFIG_ARCH_ADI_COYOTE is not set
-# CONFIG_ARCH_IXDP425 is not set
-# CONFIG_MACH_IXDPG425 is not set
-# CONFIG_MACH_IXDP465 is not set
-# CONFIG_ARCH_PRPMC1100 is not set
-# CONFIG_MACH_GTWX5715 is not set
-
-#
-# IXP4xx Options
-#
-CONFIG_IXP4XX_INDIRECT_PCI=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-CONFIG_CPU_BIG_ENDIAN=y
-CONFIG_XSCALE_PMU=y
-CONFIG_DMABOUNCE=y
-
-#
-# Bus support
-#
-CONFIG_ISA_DMA_API=y
-CONFIG_PCI=y
-# CONFIG_PCI_LEGACY_PROC is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-# CONFIG_NO_IDLE_HZ is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/mtdblock4 rw rootfstype=jffs2 mem=32M@0x00000000 init=/linuxrc x1205.hctosys=1 noirqdebug console=ttyS0,115200n8"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=m
-CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-CONFIG_INET_IPCOMP=m
-CONFIG_INET_TUNNEL=m
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_IPV6_TUNNEL=m
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_BRIDGE_NETFILTER=y
-# CONFIG_NETFILTER_NETLINK is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=m
-# CONFIG_IP_NF_CT_ACCT is not set
-# CONFIG_IP_NF_CONNTRACK_MARK is not set
-# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
-CONFIG_IP_NF_CT_PROTO_SCTP=m
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-# CONFIG_IP_NF_NETBIOS_NS is not set
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-# CONFIG_IP_NF_PPTP is not set
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_PHYSDEV=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-# CONFIG_IP_NF_MATCH_SCTP is not set
-# CONFIG_IP_NF_MATCH_DCCP is not set
-CONFIG_IP_NF_MATCH_COMMENT=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
-# CONFIG_IP_NF_MATCH_STRING is not set
-CONFIG_IP_NF_FILTER=m
-# CONFIG_IP_NF_TARGET_REJECT is not set
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-# CONFIG_IP_NF_TARGET_NFQUEUE is not set
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-# CONFIG_IP_NF_TARGET_TTL is not set
-# CONFIG_IP_NF_RAW is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-
-#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP6_NF_QUEUE is not set
-# CONFIG_IP6_NF_IPTABLES is not set
-# CONFIG_IP6_NF_TARGET_NFQUEUE is not set
-
-#
-# Bridge: Netfilter Configuration
-#
-# CONFIG_BRIDGE_NF_EBTABLES is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-CONFIG_BRIDGE=m
-CONFIG_VLAN_8021Q=m
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
-CONFIG_IPX=m
-# CONFIG_IPX_INTERN is not set
-CONFIG_ATALK=m
-CONFIG_DEV_APPLETALK=y
-CONFIG_IPDDP=m
-CONFIG_IPDDP_ENCAP=y
-CONFIG_IPDDP_DECAP=y
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
-
-#
-# Network testing
-#
-CONFIG_NET_PKTGEN=m
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_SCO=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-# CONFIG_BT_HIDP is not set
-
-#
-# Bluetooth device drivers
-#
-CONFIG_BT_HCIUSB=m
-CONFIG_BT_HCIUSB_SCO=y
-# CONFIG_BT_HCIUART is not set
-CONFIG_BT_HCIBCM203X=m
-# CONFIG_BT_HCIBPA10X is not set
-# CONFIG_BT_HCIBFUSB is not set
-# CONFIG_BT_HCIVHCI is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-# CONFIG_MTD_CFI_NOSWAP is not set
-CONFIG_MTD_CFI_BE_BYTE_SWAP=y
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
-CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-CONFIG_MTD_IXP4XX=y
-# CONFIG_MTD_EDB7312 is not set
-# CONFIG_MTD_PCI is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=4
-CONFIG_BLK_DEV_RAM_SIZE=10240
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-CONFIG_IOSCHED_DEADLINE=y
-# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=m
-# CONFIG_BLK_DEV_SR_VENDOR is not set
-CONFIG_CHR_DEV_SG=m
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA24XX is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-CONFIG_MD_RAID10=m
-CONFIG_MD_RAID5=m
-CONFIG_MD_RAID6=m
-CONFIG_MD_MULTIPATH=m
-CONFIG_MD_FAULTY=m
-CONFIG_BLK_DEV_DM=m
-# CONFIG_DM_CRYPT is not set
-# CONFIG_DM_SNAPSHOT is not set
-# CONFIG_DM_MIRROR is not set
-# CONFIG_DM_ZERO is not set
-# CONFIG_DM_MULTIPATH is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-CONFIG_TUN=m
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MACLIST=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-CONFIG_NET_RADIO=y
-
-#
-# Obsolete Wireless cards support (pre-802.11)
-#
-# CONFIG_STRIP is not set
-
-#
-# Wireless 802.11b ISA/PCI cards support
-#
-# CONFIG_AIRO is not set
-# CONFIG_HERMES is not set
-# CONFIG_ATMEL is not set
-
-#
-# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
-#
-# CONFIG_PRISM54 is not set
-# CONFIG_HOSTAP is not set
-CONFIG_NET_WIRELESS=y
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-# CONFIG_PPPOE is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
-CONFIG_NETCONSOLE=m
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_RX is not set
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=m
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-CONFIG_INPUT_EVDEV=m
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=2
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=16
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_IXP4XX_WATCHDOG=y
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_RTC=m
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_IOP3XX is not set
-CONFIG_I2C_IXP4XX=y
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_SCx200_ACB is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-CONFIG_SENSORS_EEPROM=y
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-CONFIG_SENSORS_X1205=y
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# Hardware Monitoring support
-#
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia Capabilities Port drivers
-#
-
-#
-# Multimedia devices
-#
-CONFIG_VIDEO_DEV=m
-
-#
-# Video For Linux
-#
-
-#
-# Video Adapters
-#
-CONFIG_VIDEO_BT848=m
-# CONFIG_VIDEO_SAA6588 is not set
-CONFIG_VIDEO_CPIA=m
-CONFIG_VIDEO_CPIA_USB=m
-CONFIG_VIDEO_SAA5246A=m
-CONFIG_VIDEO_SAA5249=m
-CONFIG_TUNER_3036=m
-CONFIG_VIDEO_STRADIS=m
-CONFIG_VIDEO_ZORAN=m
-CONFIG_VIDEO_ZORAN_BUZ=m
-CONFIG_VIDEO_ZORAN_DC10=m
-CONFIG_VIDEO_ZORAN_DC30=m
-CONFIG_VIDEO_ZORAN_LML33=m
-CONFIG_VIDEO_ZORAN_LML33R10=m
-CONFIG_VIDEO_SAA7134=m
-CONFIG_VIDEO_MXB=m
-CONFIG_VIDEO_DPC=m
-CONFIG_VIDEO_HEXIUM_ORION=m
-CONFIG_VIDEO_HEXIUM_GEMINI=m
-CONFIG_VIDEO_CX88=m
-CONFIG_VIDEO_OVCAMCHIP=m
-
-#
-# Radio Adapters
-#
-# CONFIG_RADIO_GEMTEK_PCI is not set
-# CONFIG_RADIO_MAXIRADIO is not set
-# CONFIG_RADIO_MAESTRO is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-CONFIG_VIDEO_SAA7146=m
-CONFIG_VIDEO_SAA7146_VV=m
-CONFIG_VIDEO_VIDEOBUF=m
-CONFIG_VIDEO_TUNER=m
-CONFIG_VIDEO_BUF=m
-CONFIG_VIDEO_BTCX=m
-CONFIG_VIDEO_IR=m
-CONFIG_VIDEO_TVEEPROM=m
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
-CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-CONFIG_SND_HWDEP=m
-CONFIG_SND_RAWMIDI=m
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-# CONFIG_SND_RTCTIMER is not set
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# PCI devices
-#
-# CONFIG_SND_ALI5451 is not set
-# CONFIG_SND_ATIIXP is not set
-# CONFIG_SND_ATIIXP_MODEM is not set
-# CONFIG_SND_AU8810 is not set
-# CONFIG_SND_AU8820 is not set
-# CONFIG_SND_AU8830 is not set
-# CONFIG_SND_AZT3328 is not set
-# CONFIG_SND_BT87X is not set
-# CONFIG_SND_CS46XX is not set
-# CONFIG_SND_CS4281 is not set
-# CONFIG_SND_EMU10K1 is not set
-# CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_YMFPCI is not set
-# CONFIG_SND_AD1889 is not set
-# CONFIG_SND_ALS4000 is not set
-# CONFIG_SND_CMIPCI is not set
-# CONFIG_SND_ENS1370 is not set
-# CONFIG_SND_ENS1371 is not set
-# CONFIG_SND_ES1938 is not set
-# CONFIG_SND_ES1968 is not set
-# CONFIG_SND_MAESTRO3 is not set
-# CONFIG_SND_FM801 is not set
-# CONFIG_SND_ICE1712 is not set
-# CONFIG_SND_ICE1724 is not set
-# CONFIG_SND_INTEL8X0 is not set
-# CONFIG_SND_INTEL8X0M is not set
-# CONFIG_SND_SONICVIBES is not set
-# CONFIG_SND_VIA82XX is not set
-# CONFIG_SND_VIA82XX_MODEM is not set
-# CONFIG_SND_VX222 is not set
-# CONFIG_SND_HDA_INTEL is not set
-
-#
-# ALSA ARM devices
-#
-
-#
-# USB devices
-#
-CONFIG_SND_USB_AUDIO=m
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_SPLIT_ISO=y
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
-
-#
-# USB Bluetooth TTY can only be used with disabled Bluetooth subsystem
-#
-CONFIG_USB_ACM=m
-CONFIG_USB_PRINTER=m
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
-CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=m
-CONFIG_USB_HIDINPUT=y
-# CONFIG_HID_FF is not set
-CONFIG_USB_HIDDEV=y
-
-#
-# USB HID Boot Protocol drivers
-#
-CONFIG_USB_KBD=m
-# CONFIG_USB_MOUSE is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_MTOUCH is not set
-# CONFIG_USB_ITMTOUCH is not set
-# CONFIG_USB_EGALAX is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB Multimedia devices
-#
-# CONFIG_USB_DABUSB is not set
-# CONFIG_USB_VICAM is not set
-# CONFIG_USB_DSBR is not set
-# CONFIG_USB_IBMCAM is not set
-# CONFIG_USB_KONICAWC is not set
-# CONFIG_USB_OV511 is not set
-# CONFIG_USB_SE401 is not set
-# CONFIG_USB_SN9C102 is not set
-# CONFIG_USB_STV680 is not set
-# CONFIG_USB_W9968CF is not set
-CONFIG_USB_PWC=m
-
-#
-# USB Network Adapters
-#
-CONFIG_USB_CATC=m
-CONFIG_USB_KAWETH=m
-CONFIG_USB_PEGASUS=m
-CONFIG_USB_RTL8150=m
-CONFIG_USB_USBNET=m
-CONFIG_USB_NET_AX8817X=m
-CONFIG_USB_NET_CDCETHER=m
-# CONFIG_USB_NET_GL620A is not set
-CONFIG_USB_NET_NET1080=m
-# CONFIG_USB_NET_PLUSB is not set
-# CONFIG_USB_NET_RNDIS_HOST is not set
-# CONFIG_USB_NET_CDC_SUBSET is not set
-CONFIG_USB_NET_ZAURUS=m
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_USB_MON is not set
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-CONFIG_USB_SERIAL=m
-CONFIG_USB_SERIAL_GENERIC=y
-# CONFIG_USB_SERIAL_AIRPRIME is not set
-CONFIG_USB_SERIAL_BELKIN=m
-CONFIG_USB_SERIAL_WHITEHEAT=m
-CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
-# CONFIG_USB_SERIAL_CP2101 is not set
-CONFIG_USB_SERIAL_CYPRESS_M8=m
-CONFIG_USB_SERIAL_EMPEG=m
-CONFIG_USB_SERIAL_FTDI_SIO=m
-CONFIG_USB_SERIAL_VISOR=m
-CONFIG_USB_SERIAL_IPAQ=m
-CONFIG_USB_SERIAL_IR=m
-CONFIG_USB_SERIAL_EDGEPORT=m
-CONFIG_USB_SERIAL_EDGEPORT_TI=m
-CONFIG_USB_SERIAL_GARMIN=m
-CONFIG_USB_SERIAL_IPW=m
-CONFIG_USB_SERIAL_KEYSPAN_PDA=m
-# CONFIG_USB_SERIAL_KEYSPAN is not set
-CONFIG_USB_SERIAL_KLSI=m
-CONFIG_USB_SERIAL_KOBIL_SCT=m
-CONFIG_USB_SERIAL_MCT_U232=m
-CONFIG_USB_SERIAL_PL2303=m
-# CONFIG_USB_SERIAL_HP4X is not set
-CONFIG_USB_SERIAL_SAFE=m
-# CONFIG_USB_SERIAL_SAFE_PADDED is not set
-CONFIG_USB_SERIAL_TI=m
-CONFIG_USB_SERIAL_CYBERJACK=m
-CONFIG_USB_SERIAL_XIRCOM=m
-CONFIG_USB_SERIAL_OMNINET=m
-CONFIG_USB_EZUSB=y
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=m
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=m
-CONFIG_EXT3_FS_XATTR=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-CONFIG_JBD=m
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=m
-CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-CONFIG_REISERFS_FS_XATTR=y
-CONFIG_REISERFS_FS_POSIX_ACL=y
-CONFIG_REISERFS_FS_SECURITY=y
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-CONFIG_AUTOFS4_FS=m
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_ZISOFS_FS=m
-CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="utf8"
-CONFIG_NTFS_FS=m
-# CONFIG_NTFS_DEBUG is not set
-CONFIG_NTFS_RW=y
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-CONFIG_NFS_V4=y
-CONFIG_NFS_DIRECTIO=y
-CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-CONFIG_SUNRPC_GSS=m
-CONFIG_RPCSEC_GSS_KRB5=m
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-CONFIG_CIFS_XATTR=y
-CONFIG_CIFS_POSIX=y
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="utf8"
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=m
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_DES=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_TEST=m
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6.15/.mtn2git_empty b/packages/obsolete/nslu2/nslu2-kernel/2.6.15/.mtn2git_empty
deleted file mode 100644
index e69de29bb2..0000000000
--- a/packages/obsolete/nslu2/nslu2-kernel/2.6.15/.mtn2git_empty
+++ /dev/null
diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6.15/00-memory-h-page-shift.patch b/packages/obsolete/nslu2/nslu2-kernel/2.6.15/00-memory-h-page-shift.patch
deleted file mode 100644
index 30d34952d5..0000000000
--- a/packages/obsolete/nslu2/nslu2-kernel/2.6.15/00-memory-h-page-shift.patch
+++ /dev/null
@@ -1,91 +0,0 @@
-http://www.arm.linux.org.uk/developer/patches/viewpatch.php?id=3218/1
-
-PAGE_SHIFT is undeclared in include/asm-arm/arch-ixp4xx/memory.h, identified by the following kernel compilation error:
-
-CC [M] sound/core/memory.o
-In file included from include/asm/memory.h:27,
-from include/asm/io.h:28,
-from sound/core/memory.c:24:
-include/asm/arch/memory.h: In function `__arch_adjust_zones':
-include/asm/arch/memory.h:28: error: `PAGE_SHIFT' undeclared (first use
-in this function)
-
-This patch replaces my previous attempt at fixing this problem (Patch 3214/1) and is based on the following feedback:
-
-Russell King wrote:
-> The error you see came up on SA1100. The best solution was to move
-> the __arch_adjust_zones() function out of line. I suggest ixp4xx
-> does the same.
-
-I have moved the function out of line into arch/arm/mach-ixp4xx/common-pci.c as suggested.
-
-Signed-off-by: Rod Whitby <rod@whitby.id.au>
- 
---- linux-2.6.15-rc7/include/asm-arm/arch-ixp4xx/memory.h~	2005-12-30 05:18:27.000000000 +1030
-+++ linux-2.6.15-rc7/include/asm-arm/arch-ixp4xx/memory.h	2005-12-30 05:36:04.000000000 +1030
-@@ -16,31 +16,10 @@
- 
- #ifndef __ASSEMBLY__
- 
--/*
-- * Only first 64MB of memory can be accessed via PCI.
-- * We use GFP_DMA to allocate safe buffers to do map/unmap.
-- * This is really ugly and we need a better way of specifying
-- * DMA-capable regions of memory.
-- */
--static inline void __arch_adjust_zones(int node, unsigned long *zone_size, 
--	unsigned long *zhole_size) 
--{
--	unsigned int sz = SZ_64M >> PAGE_SHIFT;
--
--	/*
--	 * Only adjust if > 64M on current system
--	 */
--	if (node || (zone_size[0] <= sz))
--		return;
--
--	zone_size[1] = zone_size[0] - sz;
--	zone_size[0] = sz;
--	zhole_size[1] = zhole_size[0];
--	zhole_size[0] = 0;
--}
-+void ixp4xx_adjust_zones(int node, unsigned long *size, unsigned long *holes);
- 
- #define arch_adjust_zones(node, size, holes) \
--	__arch_adjust_zones(node, size, holes)
-+	ixp4xx_adjust_zones(node, size, holes)
- 
- #define ISA_DMA_THRESHOLD (SZ_64M - 1)
- 
---- linux-2.6.15-rc7/arch/arm/mach-ixp4xx/common-pci.c~	2005-12-30 05:16:03.000000000 +1030
-+++ linux-2.6.15-rc7/arch/arm/mach-ixp4xx/common-pci.c	2005-12-30 05:43:55.000000000 +1030
-@@ -341,6 +341,29 @@ int dma_needs_bounce(struct device *dev,
- 	return (dev->bus == &pci_bus_type ) && ((dma_addr + size) >= SZ_64M);
- }
- 
-+/*
-+ * Only first 64MB of memory can be accessed via PCI.
-+ * We use GFP_DMA to allocate safe buffers to do map/unmap.
-+ * This is really ugly and we need a better way of specifying
-+ * DMA-capable regions of memory.
-+ */
-+void __init ixp4xx_adjust_zones(int node, unsigned long *zone_size, 
-+	unsigned long *zhole_size) 
-+{
-+	unsigned int sz = SZ_64M >> PAGE_SHIFT;
-+
-+	/*
-+	 * Only adjust if > 64M on current system
-+	 */
-+	if (node || (zone_size[0] <= sz))
-+		return;
-+
-+	zone_size[1] = zone_size[0] - sz;
-+	zone_size[0] = sz;
-+	zhole_size[1] = zhole_size[0];
-+	zhole_size[0] = 0;
-+}
-+
- void __init ixp4xx_pci_preinit(void)
- {  
- 	unsigned long processor_id;
diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6.15/10-mtdpart-redboot-fis-byteswap.patch b/packages/obsolete/nslu2/nslu2-kernel/2.6.15/10-mtdpart-redboot-fis-byteswap.patch
deleted file mode 100644
index 3fa0535abf..0000000000
--- a/packages/obsolete/nslu2/nslu2-kernel/2.6.15/10-mtdpart-redboot-fis-byteswap.patch
+++ /dev/null
@@ -1,70 +0,0 @@
-drivers/mtd/redboot.c: recognise a foreign byte sex partition table
-
-The RedBoot boot loader writes flash partition tables containing native
-byte sex 32 bit values.  When booting an opposite byte sex kernel (e.g.  an
-LE kernel from BE RedBoot) the current MTD driver fails to handle the
-partition table and therefore is unable to generate the correct partition
-map for the flash.
-
-The patch recognises that the FIS directory (the partition table) is
-byte-reversed by examining the partition table size, which is known to be
-one erase block (this is an assumption made elsewhere in redboot.c).  If
-the size matches the erase block after byte swapping the value then
-byte-reversal is assumed, if not no further action is taken.  The patched
-code is fail safe; should redboot.c be changed to support a partition table
-with a modified size field the test will fail and the partition table will
-be assumed to have the host byte sex.
-
-If byte-reversal is detected the patch byte swaps the remainder of the 32
-bit fields in the copy of the table; this copy is then used to set up the
-MTD partition map.
-
-Signed-off-by: John Bowler <jbowler@acm.org>
-Signed-off-by: Andrew Morton <akpm@osdl.org>
-Modified slightly and
-Signed-off-by: David Woodhouse <dwmw2@infradead.org>
-
-Index: drivers/mtd/redboot.c
-===================================================================
-RCS file: /home/cvs/mtd/drivers/mtd/redboot.c,v
-retrieving revision 1.18
-retrieving revision 1.19
-diff -u -p -r1.18 -r1.19
---- linux-2.6.15/drivers/mtd/redboot.c	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.15/drivers/mtd/redboot.c	1970-01-01 00:00:00.000000000 +0000
-@@ -89,8 +89,32 @@ static int parse_redboot_partitions(stru
- 			i = numslots;
- 			break;
- 		}
--		if (!memcmp(buf[i].name, "FIS directory", 14))
-+		if (!memcmp(buf[i].name, "FIS directory", 14)) {
-+			/* This is apparently the FIS directory entry for the
-+			 * FIS directory itself.  The FIS directory size is
-+			 * one erase block; if the buf[i].size field is
-+			 * swab32(erasesize) then we know we are looking at
-+			 * a byte swapped FIS directory - swap all the entries!
-+			 * (NOTE: this is 'size' not 'data_length'; size is
-+			 * the full size of the entry.)
-+			 */
-+			if (swab32(buf[i].size) == master->erasesize) {
-+				int j;
-+				for (j = 0; j < numslots && buf[j].name[0] != 0xff; ++j) {
-+					/* The unsigned long fields were written with the
-+					 * wrong byte sex, name and pad have no byte sex.
-+					 */
-+					swab32s(&buf[j].flash_base);
-+					swab32s(&buf[j].mem_base);
-+					swab32s(&buf[j].size);
-+					swab32s(&buf[j].entry_point);
-+					swab32s(&buf[j].data_length);
-+					swab32s(&buf[j].desc_cksum);
-+					swab32s(&buf[j].file_cksum);
-+				}
-+			}
- 			break;
-+		}
- 	}
- 	if (i == numslots) {
- 		/* Didn't find it */
-
-
diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6.15/15-jffs2-endian-config.patch b/packages/obsolete/nslu2/nslu2-kernel/2.6.15/15-jffs2-endian-config.patch
deleted file mode 100644
index fdebb652a7..0000000000
--- a/packages/obsolete/nslu2/nslu2-kernel/2.6.15/15-jffs2-endian-config.patch
+++ /dev/null
@@ -1,68 +0,0 @@
---- linux-2.6.15/fs/Kconfig~	2006-01-03 13:51:10.000000000 +1030
-+++ linux-2.6.15/fs/Kconfig	2006-01-05 01:35:36.000000000 +1030
-@@ -1132,6 +1132,31 @@ config JFFS2_CMODE_SIZE
- 
- endchoice
- 
-+choice
-+        prompt "JFFS2 endianness"
-+        default JFFS2_NATIVE_ENDIAN
-+        depends on JFFS2_FS
-+        help
-+          You can set here the default endianness of JFFS2 from
-+          the available options. Don't touch if unsure.
-+
-+config JFFS2_NATIVE_ENDIAN
-+        bool "native endian"
-+        help
-+          Uses a native endian bytestream.
-+
-+config JFFS2_BIG_ENDIAN
-+        bool "big endian"
-+        help
-+          Uses a big endian bytestream.
-+
-+config JFFS2_LITTLE_ENDIAN
-+        bool "little endian"
-+        help
-+          Uses a little endian bytestream.
-+
-+endchoice
-+
- config CRAMFS
- 	tristate "Compressed ROM file system support (cramfs)"
- 	select ZLIB_INFLATE
---- linux-2.6.15/fs/jffs2/nodelist.h~	2006-01-05 01:37:06.000000000 +1030
-+++ linux-2.6.15/fs/jffs2/nodelist.h	2006-01-05 01:37:54.000000000 +1030
-@@ -29,12 +29,10 @@
- #include "os-linux.h"
- #endif
- 
--#define JFFS2_NATIVE_ENDIAN
--
- /* Note we handle mode bits conversion from JFFS2 (i.e. Linux) to/from
-    whatever OS we're actually running on here too. */
- 
--#if defined(JFFS2_NATIVE_ENDIAN)
-+#if defined(CONFIG_JFFS2_NATIVE_ENDIAN)
- #define cpu_to_je16(x) ((jint16_t){x})
- #define cpu_to_je32(x) ((jint32_t){x})
- #define cpu_to_jemode(x) ((jmode_t){os_to_jffs2_mode(x)})
-@@ -42,7 +40,7 @@
- #define je16_to_cpu(x) ((x).v16)
- #define je32_to_cpu(x) ((x).v32)
- #define jemode_to_cpu(x) (jffs2_to_os_mode((x).m))
--#elif defined(JFFS2_BIG_ENDIAN)
-+#elif defined(CONFIG_JFFS2_BIG_ENDIAN)
- #define cpu_to_je16(x) ((jint16_t){cpu_to_be16(x)})
- #define cpu_to_je32(x) ((jint32_t){cpu_to_be32(x)})
- #define cpu_to_jemode(x) ((jmode_t){cpu_to_be32(os_to_jffs2_mode(x))})
-@@ -50,7 +48,7 @@
- #define je16_to_cpu(x) (be16_to_cpu(x.v16))
- #define je32_to_cpu(x) (be32_to_cpu(x.v32))
- #define jemode_to_cpu(x) (be32_to_cpu(jffs2_to_os_mode((x).m)))
--#elif defined(JFFS2_LITTLE_ENDIAN)
-+#elif defined(CONFIG_JFFS2_LITTLE_ENDIAN)
- #define cpu_to_je16(x) ((jint16_t){cpu_to_le16(x)})
- #define cpu_to_je32(x) ((jint32_t){cpu_to_le32(x)})
- #define cpu_to_jemode(x) ((jmode_t){cpu_to_le32(os_to_jffs2_mode(x))})
diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6.15/40-rtc-class.patch b/packages/obsolete/nslu2/nslu2-kernel/2.6.15/40-rtc-class.patch
deleted file mode 100644
index feea3f2f8b..0000000000
--- a/packages/obsolete/nslu2/nslu2-kernel/2.6.15/40-rtc-class.patch
+++ /dev/null
@@ -1,2719 +0,0 @@
---- linux-nslu2.orig/include/linux/rtc.h	2006-01-03 15:31:18.000000000 +0100
-+++ linux-nslu2/include/linux/rtc.h	2006-01-03 15:34:24.000000000 +0100
-@@ -91,8 +91,81 @@ struct rtc_pll_info {
- #define RTC_PLL_GET	_IOR('p', 0x11, struct rtc_pll_info)  /* Get PLL correction */
- #define RTC_PLL_SET	_IOW('p', 0x12, struct rtc_pll_info)  /* Set PLL correction */
- 
-+/* interrupt flags */
-+#define RTC_IRQF 0x80 /* any of the following is active */
-+#define RTC_PF 0x40
-+#define RTC_AF 0x20
-+#define RTC_UF 0x10
-+
- #ifdef __KERNEL__
- 
-+#include <linux/device.h>
-+#include <linux/seq_file.h>
-+#include <linux/cdev.h>
-+#include <linux/poll.h>
-+
-+struct rtc_class_ops {
-+	int (*open)(struct device *);
-+	void (*release)(struct device *);
-+	int (*ioctl)(struct device *, unsigned int, unsigned long);
-+	int (*read_time)(struct device *, struct rtc_time *);
-+	int (*set_time)(struct device *, struct rtc_time *);
-+	int (*read_alarm)(struct device *, struct rtc_wkalrm *);
-+	int (*set_alarm)(struct device *, struct rtc_wkalrm *);
-+	int (*proc)(struct device *, struct seq_file *);
-+	int (*set_mmss)(struct device *, unsigned long secs);
-+	int (*irq_set_state)(struct device *, int enabled);
-+	int (*irq_set_freq)(struct device *, int freq);
-+};
-+
-+#define RTC_DEVICE_NAME_SIZE 20
-+struct rtc_task;
-+
-+struct rtc_device
-+{
-+	int id;
-+	struct module *owner;
-+	struct rw_semaphore lock;
-+	struct class_device class_dev;
-+	struct rtc_class_ops *ops;
-+	char name[RTC_DEVICE_NAME_SIZE];
-+
-+	struct cdev char_dev;
-+	struct semaphore char_sem;
-+
-+	unsigned long irq_data;
-+	spinlock_t irq_lock;
-+	wait_queue_head_t irq_queue;
-+	struct fasync_struct *async_queue;
-+
-+	spinlock_t irq_task_lock;
-+	struct rtc_task *irq_task;
-+	int irq_freq;
-+};
-+#define to_rtc_device(d) container_of(d, struct rtc_device, class_dev)
-+
-+extern struct rtc_device *rtc_device_register(char *name,
-+					struct device *dev,
-+					struct rtc_class_ops *ops,
-+					struct module *owner);
-+extern void rtc_device_unregister(struct rtc_device *rdev);
-+extern int rtc_interface_register(struct class_interface *intf);
-+
-+
-+extern int rtc_month_days(unsigned int month, unsigned int year);
-+extern int rtc_valid_tm(struct rtc_time *tm);
-+extern int rtc_tm_to_time(struct rtc_time *tm, unsigned long *time);
-+extern void rtc_time_to_tm(unsigned long time, struct rtc_time *tm);
-+
-+extern int rtc_read_time(struct class_device *class_dev, struct rtc_time *tm);
-+extern int rtc_set_time(struct class_device *class_dev, struct rtc_time *tm);
-+extern int rtc_read_alarm(struct class_device *class_dev,
-+				struct rtc_wkalrm *alrm);
-+extern int rtc_set_alarm(struct class_device *class_dev,
-+				struct rtc_wkalrm *alrm);
-+extern void rtc_update_irq(struct class_device *class_dev,
-+			unsigned long num, unsigned long events);
-+
- typedef struct rtc_task {
- 	void (*func)(void *private_data);
- 	void *private_data;
---- linux-nslu2.orig/drivers/Kconfig	2006-01-03 15:31:19.000000000 +0100
-+++ linux-nslu2/drivers/Kconfig	2006-01-04 01:27:31.000000000 +0100
-@@ -66,4 +66,6 @@ source "drivers/infiniband/Kconfig"
- 
- source "drivers/sn/Kconfig"
- 
-+source "drivers/rtc/Kconfig"
-+
- endmenu
---- linux-nslu2.orig/drivers/Makefile	2006-01-03 15:33:32.000000000 +0100
-+++ linux-nslu2/drivers/Makefile	2006-01-04 01:27:31.000000000 +0100
-@@ -54,6 +54,7 @@ obj-$(CONFIG_USB_GADGET)	+= usb/gadget/
- obj-$(CONFIG_GAMEPORT)		+= input/gameport/
- obj-$(CONFIG_INPUT)		+= input/
- obj-$(CONFIG_I2O)		+= message/
-+obj-y				+= rtc/
- obj-$(CONFIG_I2C)		+= i2c/
- obj-$(CONFIG_W1)		+= w1/
- obj-$(CONFIG_HWMON)		+= hwmon/
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-nslu2/drivers/rtc/class.c	2006-01-03 15:45:19.000000000 +0100
-@@ -0,0 +1,141 @@
-+/*
-+ * RTC subsystem, base class
-+ *
-+ * Copyright (C) 2005 Tower Technologies
-+ * Author: Alessandro Zummo <a.zummo@towertech.it>
-+ *
-+ * class skeleton from drivers/hwmon/hwmon.c
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; version 2 of the License.
-+*/
-+
-+#include <linux/module.h>
-+#include <linux/rtc.h>
-+#include <linux/kdev_t.h>
-+#include <linux/idr.h>
-+
-+static DEFINE_IDR(rtc_idr);
-+static DECLARE_MUTEX(idr_lock);
-+struct class *rtc_class;
-+
-+static void rtc_device_release(struct class_device *class_dev)
-+{
-+	struct rtc_device *rtc = to_rtc_device(class_dev);
-+	down(&idr_lock);
-+	idr_remove(&rtc_idr, rtc->id);
-+	up(&idr_lock);
-+	kfree(rtc);
-+}
-+
-+/**
-+ * rtc_device_register - register w/ RTC class
-+ * @dev: the device to register
-+ *
-+ * rtc_device_unregister() must be called when the class device is no
-+ * longer needed.
-+ *
-+ * Returns the pointer to the new struct class device.
-+ */
-+struct rtc_device *rtc_device_register(char *name, struct device *dev,
-+					struct rtc_class_ops *ops,
-+					struct module *owner)
-+{
-+	struct rtc_device *rtc;
-+	int id, err;
-+
-+	if (idr_pre_get(&rtc_idr, GFP_KERNEL) == 0) {
-+		err = -ENOMEM;
-+		goto exit;
-+	}
-+
-+
-+	down(&idr_lock);
-+	err = idr_get_new(&rtc_idr, NULL, &id);
-+	up(&idr_lock);
-+
-+	if (err < 0)
-+		goto exit;
-+
-+	id = id & MAX_ID_MASK;
-+
-+	if ((rtc = kzalloc(sizeof(struct rtc_device), GFP_KERNEL)) == NULL) {
-+		err = -ENOMEM;
-+		goto exit_idr;
-+	}
-+
-+	rtc->id = id;
-+	rtc->ops = ops;
-+	rtc->owner = owner;
-+	rtc->class_dev.dev = dev;
-+	rtc->class_dev.class = rtc_class;
-+	rtc->class_dev.release = rtc_device_release;
-+
-+	init_rwsem(&rtc->lock);
-+	spin_lock_init(&rtc->irq_lock);
-+	spin_lock_init(&rtc->irq_task_lock);
-+
-+	strlcpy(rtc->name, name, RTC_DEVICE_NAME_SIZE);
-+	snprintf(rtc->class_dev.class_id, BUS_ID_SIZE, "rtc%d", id);
-+
-+	if ((err = class_device_register(&rtc->class_dev)))
-+		goto exit_kfree;
-+
-+	dev_info(dev, "rtc core: registered %s as %s\n",
-+			rtc->name, rtc->class_dev.class_id);
-+
-+	return rtc;
-+
-+exit_kfree:
-+	kfree(rtc);
-+
-+exit_idr:
-+	idr_remove(&rtc_idr, id);
-+
-+exit:
-+	return ERR_PTR(err);
-+}
-+EXPORT_SYMBOL_GPL(rtc_device_register);
-+
-+
-+/**
-+ * rtc_device_unregister - removes the previously registered RTC class device
-+ *
-+ * @rtc: the RTC class device to destroy
-+ */
-+void rtc_device_unregister(struct rtc_device *rtc)
-+{
-+	down_write(&rtc->lock);
-+	class_device_unregister(&rtc->class_dev);
-+}
-+EXPORT_SYMBOL_GPL(rtc_device_unregister);
-+
-+int rtc_interface_register(struct class_interface *intf)
-+{
-+	intf->class = rtc_class;
-+	return class_interface_register(intf);
-+}
-+EXPORT_SYMBOL_GPL(rtc_interface_register);
-+
-+static int __init rtc_init(void)
-+{
-+	rtc_class = class_create(THIS_MODULE, "rtc");
-+	if (IS_ERR(rtc_class)) {
-+		printk(KERN_ERR "%s: couldn't create class\n", __FILE__);
-+		return PTR_ERR(rtc_class);
-+	}
-+	return 0;
-+}
-+
-+static void __exit rtc_exit(void)
-+{
-+	class_destroy(rtc_class);
-+}
-+
-+module_init(rtc_init);
-+module_exit(rtc_exit);
-+
-+MODULE_AUTHOR("Alessandro Zummo <a.zummo@towerteh.it>");
-+MODULE_DESCRIPTION("RTC class support");
-+MODULE_LICENSE("GPL");
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-nslu2/drivers/rtc/Kconfig	2006-01-04 01:27:21.000000000 +0100
-@@ -0,0 +1,93 @@
-+#
-+# RTC class/drivers configuration
-+#
-+
-+menu "Real Time Clock"
-+
-+config RTC_CLASS
-+	tristate "RTC class"
-+	depends on EXPERIMENTAL
-+	default y
-+	help
-+	  Generic RTC class support. If you say yes here, you will
-+ 	  be allowed to plug one or more RTCs to your system. You will
-+	  probably want to enable one of more of the interfaces below.
-+
-+	  This driver can also be built as a module. If so, the module
-+	  will be called rtc-class.
-+
-+comment "RTC interfaces"
-+	depends on RTC_CLASS
-+
-+config RTC_INTF_SYSFS
-+	tristate "sysfs"
-+	depends on RTC_CLASS && SYSFS
-+	default RTC_CLASS
-+	help
-+	  Say yes here if you want to use your RTC using the sysfs
-+	  interface, /sys/class/rtc/rtcX .
-+
-+	  This driver can also be built as a module. If so, the module
-+	  will be called rtc-sysfs.
-+
-+config RTC_INTF_PROC
-+	tristate "proc"
-+	depends on RTC_CLASS && PROC_FS
-+	default RTC_CLASS
-+	help
-+	  Say yes here if you want to use your RTC using the proc
-+	  interface, /proc/driver/rtc .
-+
-+	  This driver can also be built as a module. If so, the module
-+	  will be called rtc-proc.
-+
-+config RTC_INTF_DEV
-+	tristate "dev"
-+	depends on RTC_CLASS
-+	default RTC_CLASS
-+	help
-+	  Say yes here if you want to use your RTC using the dev
-+	  interface, /dev/rtc .
-+
-+	  This driver can also be built as a module. If so, the module
-+	  will be called rtc-dev.
-+
-+comment "RTC drivers"
-+	depends on RTC_CLASS
-+
-+config RTC_DRV_X1205
-+	tristate "Xicor/Intersil X1205 RTC chip"
-+	depends on RTC_CLASS && I2C
-+	help
-+	  If you say yes here you get support for the
-+	  Xicor/Intersil X1205 RTC chip.
-+
-+	  This driver can also be built as a module. If so, the module
-+	  will be called rtc-x1205.
-+
-+config RTC_DRV_DS1672
-+	tristate "Dallas/Maxim DS1672"
-+	depends on RTC_CLASS && I2C
-+	help
-+	  If you say yes here you get support for the
-+	  Dallas/Maxim DS1672 timekeeping chip.
-+
-+	  This driver can also be built as a module. If so, the module
-+	  will be called rtc-ds1672.
-+
-+config RTC_DRV_TEST
-+	tristate "Test driver/device"
-+	depends on RTC_CLASS
-+	help
-+	  If you say yes here you get support for the
-+	  RTC test driver. It's a software RTC which can be
-+	  used to test the RTC subsystem APIs. It gets
-+	  the time from the system clock.
-+	  You want this driver only if you are doing development
-+	  on the RTC subsystem. Please read the source code
-+	  for further details.
-+
-+	  This driver can also be built as a module. If so, the module
-+	  will be called rtc-test.
-+
-+endmenu
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-nslu2/drivers/rtc/Makefile	2006-01-04 01:27:21.000000000 +0100
-@@ -0,0 +1,15 @@
-+#
-+# Makefile for RTC class/drivers.
-+#
-+
-+obj-y				+= utils.o
-+obj-$(CONFIG_RTC_CLASS)		+= rtc-core.o
-+rtc-core-y			:= class.o interface.o
-+obj-$(CONFIG_RTC_INTF_SYSFS)	+= rtc-sysfs.o
-+obj-$(CONFIG_RTC_INTF_PROC)	+= rtc-proc.o
-+obj-$(CONFIG_RTC_INTF_DEV)	+= rtc-dev.o
-+
-+obj-$(CONFIG_RTC_DRV_X1205)	+= rtc-x1205.o
-+obj-$(CONFIG_RTC_DRV_TEST)	+= rtc-test.o
-+obj-$(CONFIG_RTC_DRV_DS1672)	+= rtc-ds1672.o
-+
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-nslu2/drivers/rtc/interface.c	2006-01-03 15:34:24.000000000 +0100
-@@ -0,0 +1,189 @@
-+/*
-+ * RTC subsystem, interface functions
-+ *
-+ * Copyright (C) 2005 Tower Technologies
-+ * Author: Alessandro Zummo <a.zummo@towertech.it>
-+ *
-+ * based on arch/arm/common/rtctime.c
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; version 2 of the License.
-+*/
-+
-+#include <linux/rtc.h>
-+
-+extern struct class *rtc_class;
-+
-+int rtc_read_time(struct class_device *class_dev, struct rtc_time *tm)
-+{
-+	int err = -EINVAL;
-+	struct rtc_class_ops *ops = to_rtc_device(class_dev)->ops;
-+
-+	if (ops->read_time) {
-+		memset(tm, 0, sizeof(struct rtc_time));
-+		err = ops->read_time(class_dev->dev, tm);
-+	}
-+	return err;
-+}
-+EXPORT_SYMBOL(rtc_read_time);
-+
-+int rtc_set_time(struct class_device *class_dev, struct rtc_time *tm)
-+{
-+	int err;
-+	struct rtc_class_ops *ops = to_rtc_device(class_dev)->ops;
-+
-+	err = rtc_valid_tm(tm);
-+	if (err == 0 && ops->set_time)
-+		err = ops->set_time(class_dev->dev, tm);
-+
-+	return err;
-+}
-+EXPORT_SYMBOL(rtc_set_time);
-+
-+int rtc_read_alarm(struct class_device *class_dev, struct rtc_wkalrm *alarm)
-+{
-+	struct rtc_class_ops *ops = to_rtc_device(class_dev)->ops;
-+	int err = -EINVAL;
-+
-+	if (ops->read_alarm) {
-+		memset(alarm, 0, sizeof(struct rtc_wkalrm));
-+		err = ops->read_alarm(class_dev->dev, alarm);
-+	}
-+	return err;
-+}
-+EXPORT_SYMBOL(rtc_read_alarm);
-+
-+int rtc_set_alarm(struct class_device *class_dev, struct rtc_wkalrm *alarm)
-+{
-+	int err = -EINVAL;
-+	struct rtc_class_ops *ops = to_rtc_device(class_dev)->ops;
-+
-+	if (ops->set_alarm)
-+		err = ops->set_alarm(class_dev->dev, alarm);
-+	return err;
-+}
-+EXPORT_SYMBOL(rtc_set_alarm);
-+
-+void rtc_update_irq(struct class_device *class_dev,
-+		unsigned long num, unsigned long events)
-+{
-+	struct rtc_device *rtc = to_rtc_device(class_dev);
-+
-+	spin_lock(&rtc->irq_lock);
-+	rtc->irq_data = (rtc->irq_data + (num << 8)) | events;
-+	spin_unlock(&rtc->irq_lock);
-+
-+	spin_lock(&rtc->irq_task_lock);
-+	if (rtc->irq_task)
-+		rtc->irq_task->func(rtc->irq_task->private_data);
-+	spin_unlock(&rtc->irq_task_lock);
-+
-+	wake_up_interruptible(&rtc->irq_queue);
-+	kill_fasync(&rtc->async_queue, SIGIO, POLL_IN);
-+}
-+EXPORT_SYMBOL(rtc_update_irq);
-+
-+struct class_device *rtc_open(char *name)
-+{
-+	struct class_device *class_dev = NULL,
-+				*class_dev_tmp;
-+
-+	down(&rtc_class->sem);
-+	list_for_each_entry(class_dev_tmp, &rtc_class->children, node) {
-+		if (strncmp(class_dev_tmp->class_id, name, BUS_ID_SIZE) == 0) {
-+			class_dev = class_dev_tmp;
-+			break;
-+		}
-+	}
-+	up(&rtc_class->sem);
-+
-+	return class_dev;
-+}
-+EXPORT_SYMBOL(rtc_open);
-+
-+void rtc_close(struct class_device *class_dev)
-+{
-+}
-+EXPORT_SYMBOL(rtc_close);
-+
-+int rtc_irq_register(struct class_device *class_dev, struct rtc_task *task)
-+{
-+	int retval = -EBUSY;
-+	struct rtc_device *rtc = to_rtc_device(class_dev);
-+
-+	if (task == NULL || task->func == NULL)
-+		return -EINVAL;
-+
-+	spin_lock(&rtc->irq_task_lock);
-+	if (rtc->irq_task == NULL) {
-+		rtc->irq_task = task;
-+		retval = 0;
-+	}
-+	spin_unlock(&rtc->irq_task_lock);
-+
-+	return retval;
-+}
-+EXPORT_SYMBOL(rtc_irq_register);
-+
-+void rtc_irq_unregister(struct class_device *class_dev, struct rtc_task *task)
-+{
-+	struct rtc_device *rtc = to_rtc_device(class_dev);
-+
-+	spin_lock(&rtc->irq_task_lock);
-+	if (rtc->irq_task == task)
-+		rtc->irq_task = NULL;
-+	spin_unlock(&rtc->irq_task_lock);
-+}
-+EXPORT_SYMBOL(rtc_irq_unregister);
-+
-+int rtc_irq_set_state(struct class_device *class_dev, struct rtc_task *task, int enabled)
-+{
-+	int err = 0;
-+	unsigned long flags;
-+	struct rtc_device *rtc = to_rtc_device(class_dev);
-+
-+	spin_lock_irqsave(&rtc->irq_task_lock, flags);
-+	if (rtc->irq_task != task)
-+		err = -ENXIO;
-+	spin_unlock_irqrestore(&rtc->irq_task_lock, flags);
-+
-+	if (err == 0)
-+		err = rtc->ops->irq_set_state(class_dev->dev, enabled);
-+
-+	return err;
-+}
-+EXPORT_SYMBOL(rtc_irq_set_state);
-+
-+int rtc_irq_set_freq(struct class_device *class_dev, struct rtc_task *task, int freq)
-+{
-+	int err = 0, tmp = 0;
-+	unsigned long flags;
-+	struct rtc_device *rtc = to_rtc_device(class_dev);
-+
-+	/* allowed range is 2-8192 */
-+	if (freq < 2 || freq > 8192)
-+		return -EINVAL;
-+
-+/*	if ((freq > rtc_max_user_freq) && (!capable(CAP_SYS_RESOURCE)))
-+		return -EACCES;
-+*/
-+	/* check if freq is a power of 2 */
-+	while (freq > (1 << tmp))
-+		tmp++;
-+
-+	if (freq != (1 << tmp))
-+		return -EINVAL;
-+
-+	spin_lock_irqsave(&rtc->irq_task_lock, flags);
-+	if (rtc->irq_task != task)
-+		err = -ENXIO;
-+	spin_unlock_irqrestore(&rtc->irq_task_lock, flags);
-+
-+	if (err == 0) {
-+		if ((err = rtc->ops->irq_set_freq(class_dev->dev, freq)) == 0)
-+			rtc->irq_freq = freq;
-+	}
-+	return err;
-+
-+}
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-nslu2/drivers/rtc/utils.c	2006-01-03 15:34:24.000000000 +0100
-@@ -0,0 +1,97 @@
-+/*
-+ * RTC subsystem, utility functions
-+ *
-+ * Copyright (C) 2005 Tower Technologies
-+ * Author: Alessandro Zummo <a.zummo@towertech.it>
-+ *
-+ * based on arch/arm/common/rtctime.c
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; version 2 of the License.
-+*/
-+
-+#include <linux/rtc.h>
-+
-+static const unsigned char rtc_days_in_month[] = {
-+	31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31
-+};
-+
-+#define LEAPS_THRU_END_OF(y) ((y)/4 - (y)/100 + (y)/400)
-+#define LEAP_YEAR(year) ((!(year % 4) && (year % 100)) || !(year % 400))
-+
-+int rtc_month_days(unsigned int month, unsigned int year)
-+{
-+	return rtc_days_in_month[month] + (LEAP_YEAR(year) && month == 1);
-+}
-+EXPORT_SYMBOL(rtc_month_days);
-+
-+/*
-+ * Convert seconds since 01-01-1970 00:00:00 to Gregorian date.
-+ */
-+void rtc_time_to_tm(unsigned long time, struct rtc_time *tm)
-+{
-+	int days, month, year;
-+
-+	days = time / 86400;
-+	time -= days * 86400;
-+
-+	tm->tm_wday = (days + 4) % 7;
-+
-+	year = 1970 + days / 365;
-+	days -= (year - 1970) * 365
-+	        + LEAPS_THRU_END_OF(year - 1)
-+	        - LEAPS_THRU_END_OF(1970 - 1);
-+	if (days < 0) {
-+		year -= 1;
-+		days += 365 + LEAP_YEAR(year);
-+	}
-+	tm->tm_year = year - 1900;
-+	tm->tm_yday = days + 1;
-+
-+	for (month = 0; month < 11; month++) {
-+		int newdays;
-+
-+		newdays = days - rtc_month_days(month, year);
-+		if (newdays < 0)
-+			break;
-+		days = newdays;
-+	}
-+	tm->tm_mon = month;
-+	tm->tm_mday = days + 1;
-+
-+	tm->tm_hour = time / 3600;
-+	time -= tm->tm_hour * 3600;
-+	tm->tm_min = time / 60;
-+	tm->tm_sec = time - tm->tm_min * 60;
-+}
-+EXPORT_SYMBOL(rtc_time_to_tm);
-+
-+/*
-+ * Does the rtc_time represent a valid date/time?
-+ */
-+int rtc_valid_tm(struct rtc_time *tm)
-+{
-+	if (tm->tm_year < 70 ||
-+	    tm->tm_mon >= 12 ||
-+	    tm->tm_mday < 1 ||
-+	    tm->tm_mday > rtc_month_days(tm->tm_mon, tm->tm_year + 1900) ||
-+	    tm->tm_hour >= 24 ||
-+	    tm->tm_min >= 60 ||
-+	    tm->tm_sec >= 60)
-+		return -EINVAL;
-+
-+	return 0;
-+}
-+EXPORT_SYMBOL(rtc_valid_tm);
-+
-+/*
-+ * Convert Gregorian date to seconds since 01-01-1970 00:00:00.
-+ */
-+int rtc_tm_to_time(struct rtc_time *tm, unsigned long *time)
-+{
-+	*time = mktime(tm->tm_year + 1900, tm->tm_mon + 1, tm->tm_mday,
-+		       tm->tm_hour, tm->tm_min, tm->tm_sec);
-+	return 0;
-+}
-+EXPORT_SYMBOL(rtc_tm_to_time);
---- linux-nslu2.orig/arch/arm/Kconfig	2006-01-04 01:27:04.000000000 +0100
-+++ linux-nslu2/arch/arm/Kconfig	2006-01-04 01:27:31.000000000 +0100
-@@ -750,6 +750,8 @@ source "drivers/usb/Kconfig"
- 
- source "drivers/mmc/Kconfig"
- 
-+source "drivers/rtc/Kconfig"
-+
- endmenu
- 
- source "fs/Kconfig"
---- linux-nslu2.orig/arch/arm/common/rtctime.c	2006-01-04 01:27:04.000000000 +0100
-+++ linux-nslu2/arch/arm/common/rtctime.c	2006-01-04 01:27:09.000000000 +0100
-@@ -40,89 +40,6 @@ static struct rtc_ops *rtc_ops;
- 
- #define rtc_epoch 1900UL
- 
--static const unsigned char days_in_month[] = {
--	31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31
--};
--
--#define LEAPS_THRU_END_OF(y) ((y)/4 - (y)/100 + (y)/400)
--#define LEAP_YEAR(year) ((!(year % 4) && (year % 100)) || !(year % 400))
--
--static int month_days(unsigned int month, unsigned int year)
--{
--	return days_in_month[month] + (LEAP_YEAR(year) && month == 1);
--}
--
--/*
-- * Convert seconds since 01-01-1970 00:00:00 to Gregorian date.
-- */
--void rtc_time_to_tm(unsigned long time, struct rtc_time *tm)
--{
--	int days, month, year;
--
--	days = time / 86400;
--	time -= days * 86400;
--
--	tm->tm_wday = (days + 4) % 7;
--
--	year = 1970 + days / 365;
--	days -= (year - 1970) * 365
--	        + LEAPS_THRU_END_OF(year - 1)
--	        - LEAPS_THRU_END_OF(1970 - 1);
--	if (days < 0) {
--		year -= 1;
--		days += 365 + LEAP_YEAR(year);
--	}
--	tm->tm_year = year - 1900;
--	tm->tm_yday = days + 1;
--
--	for (month = 0; month < 11; month++) {
--		int newdays;
--
--		newdays = days - month_days(month, year);
--		if (newdays < 0)
--			break;
--		days = newdays;
--	}
--	tm->tm_mon = month;
--	tm->tm_mday = days + 1;
--
--	tm->tm_hour = time / 3600;
--	time -= tm->tm_hour * 3600;
--	tm->tm_min = time / 60;
--	tm->tm_sec = time - tm->tm_min * 60;
--}
--EXPORT_SYMBOL(rtc_time_to_tm);
--
--/*
-- * Does the rtc_time represent a valid date/time?
-- */
--int rtc_valid_tm(struct rtc_time *tm)
--{
--	if (tm->tm_year < 70 ||
--	    tm->tm_mon >= 12 ||
--	    tm->tm_mday < 1 ||
--	    tm->tm_mday > month_days(tm->tm_mon, tm->tm_year + 1900) ||
--	    tm->tm_hour >= 24 ||
--	    tm->tm_min >= 60 ||
--	    tm->tm_sec >= 60)
--		return -EINVAL;
--
--	return 0;
--}
--EXPORT_SYMBOL(rtc_valid_tm);
--
--/*
-- * Convert Gregorian date to seconds since 01-01-1970 00:00:00.
-- */
--int rtc_tm_to_time(struct rtc_time *tm, unsigned long *time)
--{
--	*time = mktime(tm->tm_year + 1900, tm->tm_mon + 1, tm->tm_mday,
--		       tm->tm_hour, tm->tm_min, tm->tm_sec);
--
--	return 0;
--}
--EXPORT_SYMBOL(rtc_tm_to_time);
--
- /*
-  * Calculate the next alarm time given the requested alarm time mask
-  * and the current time.
-@@ -141,13 +58,13 @@ void rtc_next_alarm_time(struct rtc_time
- 	next->tm_sec = alrm->tm_sec;
- }
- 
--static inline int rtc_read_time(struct rtc_ops *ops, struct rtc_time *tm)
-+static inline int rtc_arm_read_time(struct rtc_ops *ops, struct rtc_time *tm)
- {
- 	memset(tm, 0, sizeof(struct rtc_time));
- 	return ops->read_time(tm);
- }
- 
--static inline int rtc_set_time(struct rtc_ops *ops, struct rtc_time *tm)
-+static inline int rtc_arm_set_time(struct rtc_ops *ops, struct rtc_time *tm)
- {
- 	int ret;
- 
-@@ -158,7 +75,7 @@ static inline int rtc_set_time(struct rt
- 	return ret;
- }
- 
--static inline int rtc_read_alarm(struct rtc_ops *ops, struct rtc_wkalrm *alrm)
-+static inline int rtc_arm_read_alarm(struct rtc_ops *ops, struct rtc_wkalrm *alrm)
- {
- 	int ret = -EINVAL;
- 	if (ops->read_alarm) {
-@@ -168,7 +85,7 @@ static inline int rtc_read_alarm(struct 
- 	return ret;
- }
- 
--static inline int rtc_set_alarm(struct rtc_ops *ops, struct rtc_wkalrm *alrm)
-+static inline int rtc_arm_set_alarm(struct rtc_ops *ops, struct rtc_wkalrm *alrm)
- {
- 	int ret = -EINVAL;
- 	if (ops->set_alarm)
-@@ -256,7 +173,7 @@ static int rtc_ioctl(struct inode *inode
- 
- 	switch (cmd) {
- 	case RTC_ALM_READ:
--		ret = rtc_read_alarm(ops, &alrm);
-+		ret = rtc_arm_read_alarm(ops, &alrm);
- 		if (ret)
- 			break;
- 		ret = copy_to_user(uarg, &alrm.time, sizeof(tm));
-@@ -278,11 +195,11 @@ static int rtc_ioctl(struct inode *inode
- 		alrm.time.tm_wday = -1;
- 		alrm.time.tm_yday = -1;
- 		alrm.time.tm_isdst = -1;
--		ret = rtc_set_alarm(ops, &alrm);
-+		ret = rtc_arm_set_alarm(ops, &alrm);
- 		break;
- 
- 	case RTC_RD_TIME:
--		ret = rtc_read_time(ops, &tm);
-+		ret = rtc_arm_read_time(ops, &tm);
- 		if (ret)
- 			break;
- 		ret = copy_to_user(uarg, &tm, sizeof(tm));
-@@ -300,7 +217,7 @@ static int rtc_ioctl(struct inode *inode
- 			ret = -EFAULT;
- 			break;
- 		}
--		ret = rtc_set_time(ops, &tm);
-+		ret = rtc_arm_set_time(ops, &tm);
- 		break;
- 
- 	case RTC_EPOCH_SET:
-@@ -331,11 +248,11 @@ static int rtc_ioctl(struct inode *inode
- 			ret = -EFAULT;
- 			break;
- 		}
--		ret = rtc_set_alarm(ops, &alrm);
-+		ret = rtc_arm_set_alarm(ops, &alrm);
- 		break;
- 
- 	case RTC_WKALM_RD:
--		ret = rtc_read_alarm(ops, &alrm);
-+		ret = rtc_arm_read_alarm(ops, &alrm);
- 		if (ret)
- 			break;
- 		ret = copy_to_user(uarg, &alrm, sizeof(alrm));
-@@ -425,7 +342,7 @@ static int rtc_read_proc(char *page, cha
- 	struct rtc_time tm;
- 	char *p = page;
- 
--	if (rtc_read_time(ops, &tm) == 0) {
-+	if (rtc_arm_read_time(ops, &tm) == 0) {
- 		p += sprintf(p,
- 			"rtc_time\t: %02d:%02d:%02d\n"
- 			"rtc_date\t: %04d-%02d-%02d\n"
-@@ -435,7 +352,7 @@ static int rtc_read_proc(char *page, cha
- 			rtc_epoch);
- 	}
- 
--	if (rtc_read_alarm(ops, &alrm) == 0) {
-+	if (rtc_arm_read_alarm(ops, &alrm) == 0) {
- 		p += sprintf(p, "alrm_time\t: ");
- 		if ((unsigned int)alrm.time.tm_hour <= 24)
- 			p += sprintf(p, "%02d:", alrm.time.tm_hour);
---- linux-nslu2.orig/include/asm-arm/rtc.h	2006-01-04 01:27:04.000000000 +0100
-+++ linux-nslu2/include/asm-arm/rtc.h	2006-01-04 01:27:09.000000000 +0100
-@@ -25,9 +25,6 @@ struct rtc_ops {
- 	int		(*proc)(char *buf);
- };
- 
--void rtc_time_to_tm(unsigned long, struct rtc_time *);
--int rtc_tm_to_time(struct rtc_time *, unsigned long *);
--int rtc_valid_tm(struct rtc_time *);
- void rtc_next_alarm_time(struct rtc_time *, struct rtc_time *, struct rtc_time *);
- void rtc_update(unsigned long, unsigned long);
- int register_rtc(struct rtc_ops *);
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-nslu2/drivers/rtc/rtc-sysfs.c	2006-01-04 01:27:12.000000000 +0100
-@@ -0,0 +1,125 @@
-+/*
-+ * RTC subsystem, sysfs interface
-+ *
-+ * Copyright (C) 2005 Tower Technologies
-+ * Author: Alessandro Zummo <a.zummo@towertech.it>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; version 2 of the License.
-+*/
-+
-+#include <linux/module.h>
-+#include <linux/rtc.h>
-+
-+/* device attributes */
-+
-+static ssize_t rtc_sysfs_show_name(struct class_device *dev, char *buf)
-+{
-+	return sprintf(buf, "%s\n", to_rtc_device(dev)->name);
-+}
-+static CLASS_DEVICE_ATTR(name, S_IRUGO, rtc_sysfs_show_name, NULL);
-+
-+static ssize_t rtc_sysfs_show_date(struct class_device *dev, char *buf)
-+{
-+	ssize_t retval = 0;
-+	struct rtc_device *rtc = to_rtc_device(dev);
-+	struct rtc_time tm;
-+
-+	if (down_read_trylock(&rtc->lock) == 0)
-+		return -ENODEV;
-+
-+	if (rtc_read_time(dev, &tm) == 0) {
-+		retval = sprintf(buf, "%04d-%02d-%02d\n",
-+			tm.tm_year + 1900, tm.tm_mon + 1, tm.tm_mday);
-+	}
-+
-+	up_read(&rtc->lock);
-+	return retval;
-+}
-+static CLASS_DEVICE_ATTR(date, S_IRUGO, rtc_sysfs_show_date, NULL);
-+
-+static ssize_t rtc_sysfs_show_time(struct class_device *dev, char *buf)
-+{
-+	ssize_t retval = 0;
-+	struct rtc_device *rtc = to_rtc_device(dev);
-+	struct rtc_time tm;
-+
-+	if (down_read_trylock(&rtc->lock) == 0)
-+		return -ENODEV;
-+
-+	if (rtc_read_time(dev, &tm) == 0) {
-+		retval = sprintf(buf, "%02d:%02d:%02d\n",
-+			tm.tm_hour, tm.tm_min, tm.tm_sec);
-+	}
-+
-+	up_read(&rtc->lock);
-+	return retval;
-+}
-+static CLASS_DEVICE_ATTR(time, S_IRUGO, rtc_sysfs_show_time, NULL);
-+
-+static ssize_t rtc_sysfs_show_since_epoch(struct class_device *dev, char *buf)
-+{
-+	ssize_t retval = 0;
-+	struct rtc_device *rtc = to_rtc_device(dev);
-+	struct rtc_time tm;
-+
-+	if (down_read_trylock(&rtc->lock) == 0)
-+		return -ENODEV;
-+
-+	if (rtc_read_time(dev, &tm) == 0) {
-+		unsigned long time;
-+		rtc_tm_to_time(&tm, &time);
-+		retval = sprintf(buf, "%lu\n", time);
-+	}
-+
-+	up_read(&rtc->lock);
-+	return retval;
-+}
-+static CLASS_DEVICE_ATTR(since_epoch, S_IRUGO, rtc_sysfs_show_since_epoch, NULL);
-+
-+/* insertion/removal hooks */
-+
-+static int __devinit rtc_sysfs_add_device(struct class_device *class_dev,
-+					   struct class_interface *class_intf)
-+{
-+	class_device_create_file(class_dev, &class_device_attr_name);
-+	class_device_create_file(class_dev, &class_device_attr_date);
-+	class_device_create_file(class_dev, &class_device_attr_time);
-+	class_device_create_file(class_dev, &class_device_attr_since_epoch);
-+	dev_info(class_dev->dev, "rtc intf: sysfs\n");
-+	return 0;
-+}
-+
-+static void rtc_sysfs_remove_device(struct class_device *class_dev,
-+				      struct class_interface *class_intf)
-+{
-+	class_device_remove_file(class_dev, &class_device_attr_name);
-+	class_device_remove_file(class_dev, &class_device_attr_date);
-+	class_device_remove_file(class_dev, &class_device_attr_time);
-+	class_device_remove_file(class_dev, &class_device_attr_since_epoch);
-+}
-+
-+/* interface registration */
-+
-+struct class_interface rtc_sysfs_interface = {
-+	.add = &rtc_sysfs_add_device,
-+	.remove = &rtc_sysfs_remove_device,
-+};
-+
-+static int __init rtc_sysfs_init(void)
-+{
-+	return rtc_interface_register(&rtc_sysfs_interface);
-+}
-+
-+static void __exit rtc_sysfs_exit(void)
-+{
-+	class_interface_unregister(&rtc_sysfs_interface);
-+}
-+
-+module_init(rtc_sysfs_init);
-+module_exit(rtc_sysfs_exit);
-+
-+MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>");
-+MODULE_DESCRIPTION("RTC class sysfs interface");
-+MODULE_LICENSE("GPL");
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-nslu2/drivers/rtc/rtc-proc.c	2006-01-04 01:27:14.000000000 +0100
-@@ -0,0 +1,158 @@
-+/*
-+ * RTC subsystem, proc interface
-+ *
-+ * Copyright (C) 2005 Tower Technologies
-+ * Author: Alessandro Zummo <a.zummo@towertech.it>
-+ *
-+ * based on arch/arm/common/rtctime.c
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; version 2 of the License.
-+*/
-+
-+#include <linux/module.h>
-+#include <linux/rtc.h>
-+#include <linux/proc_fs.h>
-+#include <linux/seq_file.h>
-+
-+static struct class_device *rtc_dev = NULL;
-+static DECLARE_MUTEX(rtc_sem);
-+
-+static int rtc_proc_show(struct seq_file *seq, void *offset)
-+{
-+	struct class_device *class_dev = seq->private;
-+	struct rtc_class_ops *ops = to_rtc_device(class_dev)->ops;
-+	struct rtc_wkalrm alrm;
-+	struct rtc_time tm;
-+
-+	if (rtc_read_time(class_dev, &tm) == 0) {
-+		seq_printf(seq,
-+			"rtc_time\t: %02d:%02d:%02d\n"
-+			"rtc_date\t: %04d-%02d-%02d\n",
-+			tm.tm_hour, tm.tm_min, tm.tm_sec,
-+			tm.tm_year + 1900, tm.tm_mon + 1, tm.tm_mday);
-+	}
-+
-+	if (rtc_read_alarm(class_dev, &alrm) == 0) {
-+		seq_printf(seq, "alrm_time\t: ");
-+		if ((unsigned int)alrm.time.tm_hour <= 24)
-+			seq_printf(seq, "%02d:", alrm.time.tm_hour);
-+		else
-+			seq_printf(seq, "**:");
-+		if ((unsigned int)alrm.time.tm_min <= 59)
-+			seq_printf(seq, "%02d:", alrm.time.tm_min);
-+		else
-+			seq_printf(seq, "**:");
-+		if ((unsigned int)alrm.time.tm_sec <= 59)
-+			seq_printf(seq, "%02d\n", alrm.time.tm_sec);
-+		else
-+			seq_printf(seq, "**\n");
-+
-+		seq_printf(seq, "alrm_date\t: ");
-+		if ((unsigned int)alrm.time.tm_year <= 200)
-+			seq_printf(seq, "%04d-", alrm.time.tm_year + 1900);
-+		else
-+			seq_printf(seq, "****-");
-+		if ((unsigned int)alrm.time.tm_mon <= 11)
-+			seq_printf(seq, "%02d-", alrm.time.tm_mon + 1);
-+		else
-+			seq_printf(seq, "**-");
-+		if ((unsigned int)alrm.time.tm_mday <= 31)
-+			seq_printf(seq, "%02d\n", alrm.time.tm_mday);
-+		else
-+			seq_printf(seq, "**\n");
-+		seq_printf(seq, "alrm_wakeup\t: %s\n",
-+			     alrm.enabled ? "yes" : "no");
-+		seq_printf(seq, "alrm_pending\t: %s\n",
-+			     alrm.pending ? "yes" : "no");
-+	}
-+
-+	if (ops->proc)
-+		ops->proc(class_dev->dev, seq);
-+
-+	return 0;
-+}
-+
-+static int rtc_proc_open(struct inode *inode, struct file *file)
-+{
-+	struct class_device *class_dev = PDE(inode)->data;
-+
-+	if (!try_module_get(THIS_MODULE))
-+		return -ENODEV;
-+
-+	return single_open(file, rtc_proc_show, class_dev);
-+}
-+
-+static int rtc_proc_release(struct inode *inode, struct file *file)
-+{
-+	int res = single_release(inode, file);
-+	module_put(THIS_MODULE);
-+	return res;
-+}
-+
-+static struct file_operations rtc_proc_fops = {
-+	.open		= rtc_proc_open,
-+	.read		= seq_read,
-+	.llseek		= seq_lseek,
-+	.release	= rtc_proc_release,
-+};
-+
-+static int rtc_proc_add_device(struct class_device *class_dev,
-+					   struct class_interface *class_intf)
-+{
-+	down(&rtc_sem);
-+	if (rtc_dev == NULL) {
-+		struct proc_dir_entry *ent;
-+
-+		rtc_dev = class_dev;
-+
-+		if ((ent = create_proc_entry("driver/rtc", 0, NULL))) {
-+			struct rtc_device *rtc = to_rtc_device(class_dev);
-+
-+			ent->proc_fops = &rtc_proc_fops;
-+			ent->owner = rtc->owner;
-+			ent->data = class_dev;
-+
-+			dev_info(class_dev->dev, "rtc intf: proc\n");
-+		}
-+		else
-+			rtc_dev = NULL;
-+	}
-+	up(&rtc_sem);
-+
-+	return 0;
-+}
-+
-+static void rtc_proc_remove_device(struct class_device *class_dev,
-+					      struct class_interface *class_intf)
-+{
-+	down(&rtc_sem);
-+	if (rtc_dev == class_dev) {
-+		remove_proc_entry("driver/rtc", NULL);
-+		rtc_dev = NULL;
-+	}
-+	up(&rtc_sem);
-+}
-+
-+struct class_interface rtc_proc_interface = {
-+	.add = &rtc_proc_add_device,
-+	.remove = &rtc_proc_remove_device,
-+};
-+
-+static int __init rtc_proc_init(void)
-+{
-+	return rtc_interface_register(&rtc_proc_interface);
-+}
-+
-+static void __exit rtc_proc_exit(void)
-+{
-+	class_interface_unregister(&rtc_proc_interface);
-+}
-+
-+module_init(rtc_proc_init);
-+module_exit(rtc_proc_exit);
-+
-+MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>");
-+MODULE_DESCRIPTION("RTC class proc interface");
-+MODULE_LICENSE("GPL");
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-nslu2/drivers/rtc/rtc-dev.c	2006-01-04 01:27:15.000000000 +0100
-@@ -0,0 +1,372 @@
-+/*
-+ * RTC subsystem, dev interface
-+ *
-+ * Copyright (C) 2005 Tower Technologies
-+ * Author: Alessandro Zummo <a.zummo@towertech.it>
-+ *
-+ * based on arch/arm/common/rtctime.c
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; version 2 of the License.
-+*/
-+
-+#include <linux/module.h>
-+#include <linux/rtc.h>
-+
-+static dev_t rtc_devt;
-+
-+#define RTC_DEV_MAX 16 /* 16 RTCs should be enough for everyone... */
-+
-+static int rtc_dev_open(struct inode *inode, struct file *file)
-+{
-+	int err;
-+	struct rtc_device *rtc = container_of(inode->i_cdev,
-+					struct rtc_device, char_dev);
-+	struct rtc_class_ops *ops = rtc->ops;
-+
-+	/* We keep the lock as long as the device is in use
-+	 * and return immediately if busy
-+	 */
-+	if (down_trylock(&rtc->char_sem))
-+		return -EBUSY;
-+
-+	file->private_data = &rtc->class_dev;
-+
-+	err = ops->open ? ops->open(rtc->class_dev.dev) : 0;
-+	if (err == 0) {
-+
-+		spin_lock_irq(&rtc->irq_lock);
-+		rtc->irq_data = 0;
-+		spin_unlock_irq(&rtc->irq_lock);
-+
-+		return 0;
-+	}
-+
-+	/* something has gone wrong, release the lock */
-+	up(&rtc->char_sem);
-+	return err;
-+}
-+
-+
-+static ssize_t
-+rtc_dev_read(struct file *file, char __user *buf, size_t count, loff_t *ppos)
-+{
-+	struct rtc_device *rtc = to_rtc_device(file->private_data);
-+
-+	DECLARE_WAITQUEUE(wait, current);
-+	unsigned long data;
-+	ssize_t ret;
-+
-+	if (count < sizeof(unsigned long))
-+		return -EINVAL;
-+
-+	add_wait_queue(&rtc->irq_queue, &wait);
-+	do {
-+		__set_current_state(TASK_INTERRUPTIBLE);
-+
-+		spin_lock_irq(&rtc->irq_lock);
-+		data = rtc->irq_data;
-+		rtc->irq_data = 0;
-+		spin_unlock_irq(&rtc->irq_lock);
-+
-+		if (data != 0) {
-+			ret = 0;
-+			break;
-+		}
-+		if (file->f_flags & O_NONBLOCK) {
-+			ret = -EAGAIN;
-+			break;
-+		}
-+		if (signal_pending(current)) {
-+			ret = -ERESTARTSYS;
-+			break;
-+		}
-+		schedule();
-+	} while (1);
-+	set_current_state(TASK_RUNNING);
-+	remove_wait_queue(&rtc->irq_queue, &wait);
-+
-+	if (ret == 0) {
-+		ret = put_user(data, (unsigned long __user *)buf);
-+		if (ret == 0)
-+			ret = sizeof(unsigned long);
-+	}
-+	return ret;
-+}
-+
-+static unsigned int rtc_dev_poll(struct file *file, poll_table *wait)
-+{
-+	struct rtc_device *rtc = to_rtc_device(file->private_data);
-+	unsigned long data;
-+
-+	poll_wait(file, &rtc->irq_queue, wait);
-+
-+	spin_lock_irq(&rtc->irq_lock);
-+	data = rtc->irq_data;
-+	spin_unlock_irq(&rtc->irq_lock);
-+
-+	return data != 0 ? POLLIN | POLLRDNORM : 0;
-+}
-+
-+static int rtc_dev_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
-+		     unsigned long arg)
-+{
-+	int err = 0;
-+	struct class_device *class_dev = file->private_data;
-+	struct rtc_device *rtc = to_rtc_device(class_dev);
-+	struct rtc_class_ops *ops = rtc->ops;
-+	struct rtc_time tm;
-+	struct rtc_wkalrm alarm;
-+	void __user *uarg = (void __user *) arg;
-+
-+	/* avoid conflicting IRQ users */
-+	if (cmd == RTC_PIE_ON || cmd == RTC_PIE_OFF || cmd == RTC_IRQP_SET) {
-+		spin_lock(&rtc->irq_task_lock);
-+		if (rtc->irq_task)
-+			err = -EBUSY;
-+		spin_unlock(&rtc->irq_task_lock);
-+
-+		if (err < 0)
-+			return err;
-+	}
-+
-+	/* try the driver's ioctl interface */
-+	if (ops->ioctl) {
-+		err = ops->ioctl(class_dev->dev, cmd, arg);
-+		if (err < 0 && err != -EINVAL)
-+			return err;
-+	}
-+
-+	/* if the driver does not provide the ioctl interface
-+	 * or if that particular ioctl was not implemented
-+	 * (-EINVAL), we will try to emulate here.
-+	 */
-+
-+	switch (cmd) {
-+	case RTC_ALM_READ:
-+		if ((err = rtc_read_alarm(class_dev, &alarm)) < 0)
-+			return err;
-+
-+		if ((err = copy_to_user(uarg, &alarm.time, sizeof(tm))))
-+			return -EFAULT;
-+		break;
-+
-+	case RTC_ALM_SET:
-+		if ((err = copy_from_user(&alarm.time, uarg, sizeof(tm))))
-+			return -EFAULT;
-+
-+		alarm.enabled = 0;
-+		alarm.pending = 0;
-+		alarm.time.tm_mday = -1;
-+		alarm.time.tm_mon = -1;
-+		alarm.time.tm_year = -1;
-+		alarm.time.tm_wday = -1;
-+		alarm.time.tm_yday = -1;
-+		alarm.time.tm_isdst = -1;
-+		err = rtc_set_alarm(class_dev, &alarm);
-+		break;
-+
-+	case RTC_RD_TIME:
-+		if ((err = rtc_read_time(class_dev, &tm)) < 0)
-+			return err;
-+
-+		if ((err = copy_to_user(uarg, &tm, sizeof(tm))))
-+			return -EFAULT;
-+		break;
-+
-+	case RTC_SET_TIME:
-+		if (!capable(CAP_SYS_TIME))
-+			return -EACCES;
-+
-+		if ((err = copy_from_user(&tm, uarg, sizeof(tm))))
-+			return -EFAULT;
-+
-+		err = rtc_set_time(class_dev, &tm);
-+		break;
-+#if 0
-+	case RTC_EPOCH_SET:
-+#ifndef rtc_epoch
-+		/*
-+		 * There were no RTC clocks before 1900.
-+		 */
-+		if (arg < 1900) {
-+			err = -EINVAL;
-+			break;
-+		}
-+		if (!capable(CAP_SYS_TIME)) {
-+			err = -EACCES;
-+			break;
-+		}
-+		rtc_epoch = arg;
-+		err = 0;
-+#endif
-+		break;
-+
-+	case RTC_EPOCH_READ:
-+		err = put_user(rtc_epoch, (unsigned long __user *)uarg);
-+		break;
-+#endif
-+	case RTC_WKALM_SET:
-+		if ((err = copy_from_user(&alarm, uarg, sizeof(alarm))))
-+			return -EFAULT;
-+
-+		err = rtc_set_alarm(class_dev, &alarm);
-+		break;
-+
-+	case RTC_WKALM_RD:
-+		if ((err = rtc_read_alarm(class_dev, &alarm)) < 0)
-+			return err;
-+
-+		if ((err = copy_to_user(uarg, &alarm, sizeof(alarm))))
-+			return -EFAULT;
-+		break;
-+
-+	default:
-+		err = -EINVAL;
-+		break;
-+	}
-+
-+	return err;
-+}
-+
-+static int rtc_dev_release(struct inode *inode, struct file *file)
-+{
-+	struct rtc_device *rtc = to_rtc_device(file->private_data);
-+
-+	if (rtc->ops->release)
-+		rtc->ops->release(rtc->class_dev.dev);
-+
-+	spin_lock_irq(&rtc->irq_lock);
-+	rtc->irq_data = 0;
-+	spin_unlock_irq(&rtc->irq_lock);
-+
-+	up(&rtc->char_sem);
-+	return 0;
-+}
-+
-+static int rtc_dev_fasync(int fd, struct file *file, int on)
-+{
-+	struct rtc_device *rtc = to_rtc_device(file->private_data);
-+	return fasync_helper(fd, file, on, &rtc->async_queue);
-+}
-+
-+static struct file_operations rtc_dev_fops = {
-+	.owner		= THIS_MODULE,
-+	.llseek		= no_llseek,
-+	.read		= rtc_dev_read,
-+	.poll		= rtc_dev_poll,
-+	.ioctl		= rtc_dev_ioctl,
-+	.open		= rtc_dev_open,
-+	.release	= rtc_dev_release,
-+	.fasync		= rtc_dev_fasync,
-+};
-+
-+static ssize_t rtc_dev_show_dev(struct class_device *class_dev, char *buf)
-+{
-+        return print_dev_t(buf, class_dev->devt);
-+}
-+static CLASS_DEVICE_ATTR(dev, S_IRUGO, rtc_dev_show_dev, NULL);
-+
-+/* insertion/removal hooks */
-+
-+static int rtc_dev_add_device(struct class_device *class_dev,
-+				struct class_interface *class_intf)
-+{
-+	struct rtc_device *rtc = to_rtc_device(class_dev);
-+
-+	if (rtc->id >= RTC_DEV_MAX) {
-+		dev_err(class_dev->dev, "too many RTCs\n");
-+		return -EINVAL;
-+	}
-+
-+	init_MUTEX(&rtc->char_sem);
-+	spin_lock_init(&rtc->irq_lock);
-+	init_waitqueue_head(&rtc->irq_queue);
-+
-+	cdev_init(&rtc->char_dev, &rtc_dev_fops);
-+	rtc->char_dev.owner = rtc->owner;
-+	class_dev->devt = MKDEV(MAJOR(rtc_devt), rtc->id);
-+
-+	if (cdev_add(&rtc->char_dev, class_dev->devt, 1)) {
-+		cdev_del(&rtc->char_dev);
-+
-+		dev_err(class_dev->dev,
-+			"failed to add char device %d:%d\n",
-+			MAJOR(class_dev->devt),
-+			MINOR(class_dev->devt));
-+
-+		class_dev->devt = MKDEV(0, 0);
-+		return -ENODEV;
-+	}
-+
-+	class_device_create_file(class_dev, &class_device_attr_dev);
-+
-+	dev_info(class_dev->dev, "rtc intf: dev (%d:%d)\n",
-+		MAJOR(class_dev->devt),
-+		MINOR(class_dev->devt));
-+
-+	kobject_hotplug(&class_dev->kobj, KOBJ_ADD);
-+
-+	return 0;
-+}
-+
-+static void rtc_dev_remove_device(struct class_device *class_dev,
-+					struct class_interface *class_intf)
-+{
-+	struct rtc_device *rtc = to_rtc_device(class_dev);
-+
-+	class_device_remove_file(class_dev, &class_device_attr_dev);
-+
-+	if (MAJOR(class_dev->devt)) {
-+		dev_dbg(class_dev->dev, "removing char %d:%d\n",
-+			MAJOR(class_dev->devt),
-+			MINOR(class_dev->devt));
-+		cdev_del(&rtc->char_dev);
-+
-+		kobject_hotplug(&class_dev->kobj, KOBJ_REMOVE);
-+
-+		class_dev->devt = MKDEV(0, 0);
-+	}
-+}
-+
-+/* interface registration */
-+
-+struct class_interface rtc_dev_interface = {
-+	.add = &rtc_dev_add_device,
-+	.remove = &rtc_dev_remove_device,
-+};
-+
-+static int __init rtc_dev_init(void)
-+{
-+	int err;
-+
-+	if ((err = alloc_chrdev_region(&rtc_devt, 0, RTC_DEV_MAX, "rtc")) < 0) {
-+		printk(KERN_ERR "%s: failed to allocate char dev region\n",
-+			__FILE__);
-+		return err;
-+	}
-+
-+	if ((err = rtc_interface_register(&rtc_dev_interface)) < 0) {
-+		printk(KERN_ERR "%s: failed to register the interface\n",
-+			__FILE__);
-+		unregister_chrdev_region(rtc_devt, RTC_DEV_MAX);
-+		return err;
-+	}
-+
-+	return 0;
-+}
-+
-+static void __exit rtc_dev_exit(void)
-+{
-+	class_interface_unregister(&rtc_dev_interface);
-+
-+	unregister_chrdev_region(rtc_devt, RTC_DEV_MAX);
-+}
-+
-+module_init(rtc_dev_init);
-+module_exit(rtc_dev_exit);
-+
-+MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>");
-+MODULE_DESCRIPTION("RTC class dev interface");
-+MODULE_LICENSE("GPL");
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-nslu2/drivers/rtc/rtc-x1205.c	2006-01-04 01:27:17.000000000 +0100
-@@ -0,0 +1,725 @@
-+/*
-+ * An i2c driver for the Xicor/Intersil X1205 RTC
-+ * Copyright 2004 Karen Spearel
-+ * Copyright 2005 Alessandro Zummo
-+ *
-+ * please send all reports to:
-+ *	kas11 at tampabay dot rr dot com
-+ *	a dot zummo at towertech dot it
-+ *
-+ * based on a lot of other RTC drivers.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/slab.h>
-+#include <linux/err.h>
-+#include <linux/i2c.h>
-+#include <linux/string.h>
-+#include <linux/bcd.h>
-+#include <linux/rtc.h>
-+#include <linux/delay.h>
-+
-+#define DRV_VERSION "1.0.5"
-+
-+/* Addresses to scan: none. This chip is located at
-+ * 0x6f and uses a two bytes register addressing.
-+ * Two bytes need to be written to read a single register,
-+ * while most other chips just require one and take the second
-+ * one as the data to be written. To prevent corrupting
-+ * unknown chips, the user must explicitely set the probe parameter.
-+ */
-+
-+static unsigned short normal_i2c[] = { I2C_CLIENT_END };
-+
-+/* Insmod parameters */
-+I2C_CLIENT_INSMOD;
-+I2C_CLIENT_MODULE_PARM(hctosys,
-+	"Set the system time from the hardware clock upon initialization");
-+
-+/* offsets into CCR area */
-+
-+#define CCR_SEC			0
-+#define CCR_MIN			1
-+#define CCR_HOUR		2
-+#define CCR_MDAY		3
-+#define CCR_MONTH		4
-+#define CCR_YEAR		5
-+#define CCR_WDAY		6
-+#define CCR_Y2K			7
-+
-+#define X1205_REG_SR		0x3F	/* status register */
-+#define X1205_REG_Y2K		0x37
-+#define X1205_REG_DW		0x36
-+#define X1205_REG_YR		0x35
-+#define X1205_REG_MO		0x34
-+#define X1205_REG_DT		0x33
-+#define X1205_REG_HR		0x32
-+#define X1205_REG_MN		0x31
-+#define X1205_REG_SC		0x30
-+#define X1205_REG_DTR		0x13
-+#define X1205_REG_ATR		0x12
-+#define X1205_REG_INT		0x11
-+#define X1205_REG_0		0x10
-+#define X1205_REG_Y2K1		0x0F
-+#define X1205_REG_DWA1		0x0E
-+#define X1205_REG_YRA1		0x0D
-+#define X1205_REG_MOA1		0x0C
-+#define X1205_REG_DTA1		0x0B
-+#define X1205_REG_HRA1		0x0A
-+#define X1205_REG_MNA1		0x09
-+#define X1205_REG_SCA1		0x08
-+#define X1205_REG_Y2K0		0x07
-+#define X1205_REG_DWA0		0x06
-+#define X1205_REG_YRA0		0x05
-+#define X1205_REG_MOA0		0x04
-+#define X1205_REG_DTA0		0x03
-+#define X1205_REG_HRA0		0x02
-+#define X1205_REG_MNA0		0x01
-+#define X1205_REG_SCA0		0x00
-+
-+#define X1205_CCR_BASE		0x30	/* Base address of CCR */
-+#define X1205_ALM0_BASE		0x00	/* Base address of ALARM0 */
-+
-+#define X1205_SR_RTCF		0x01	/* Clock failure */
-+#define X1205_SR_WEL		0x02	/* Write Enable Latch */
-+#define X1205_SR_RWEL		0x04	/* Register Write Enable */
-+
-+#define X1205_DTR_DTR0		0x01
-+#define X1205_DTR_DTR1		0x02
-+#define X1205_DTR_DTR2		0x04
-+
-+#define X1205_HR_MIL		0x80	/* Set in ccr.hour for 24 hr mode */
-+
-+/* Prototypes */
-+static int x1205_attach(struct i2c_adapter *adapter);
-+static int x1205_detach(struct i2c_client *client);
-+static int x1205_probe(struct i2c_adapter *adapter, int address, int kind);
-+
-+static struct i2c_driver x1205_driver = {
-+	.owner		= THIS_MODULE,
-+	.name		= "x1205",
-+	.flags		= I2C_DF_NOTIFY,
-+	.attach_adapter = &x1205_attach,
-+	.detach_client	= &x1205_detach,
-+};
-+
-+/*
-+ * In the routines that deal directly with the x1205 hardware, we use
-+ * rtc_time -- month 0-11, hour 0-23, yr = calendar year-epoch
-+ * Epoch is initialized as 2000. Time is set to UTC.
-+ */
-+static int x1205_get_datetime(struct i2c_client *client, struct rtc_time *tm,
-+				unsigned char reg_base)
-+{
-+	unsigned char dt_addr[2] = { 0, reg_base };
-+
-+	unsigned char buf[8];
-+
-+	struct i2c_msg msgs[] = {
-+		{ client->addr, 0, 2, dt_addr },	/* setup read ptr */
-+		{ client->addr, I2C_M_RD, 8, buf },	/* read date */
-+	};
-+
-+	/* read date registers */
-+	if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) {
-+		dev_err(&client->dev, "%s: read error\n", __FUNCTION__);
-+		return -EIO;
-+	}
-+
-+	dev_dbg(&client->dev,
-+		"%s: raw read data - sec=%02x, min=%02x, hr=%02x, "
-+		"mday=%02x, mon=%02x, year=%02x, wday=%02x, y2k=%02x\n",
-+		__FUNCTION__,
-+		buf[0], buf[1], buf[2], buf[3],
-+		buf[4], buf[5], buf[6], buf[7]);
-+
-+	tm->tm_sec = BCD2BIN(buf[CCR_SEC]);
-+	tm->tm_min = BCD2BIN(buf[CCR_MIN]);
-+	tm->tm_hour = BCD2BIN(buf[CCR_HOUR] & 0x3F); /* hr is 0-23 */
-+	tm->tm_mday = BCD2BIN(buf[CCR_MDAY]);
-+	tm->tm_mon = BCD2BIN(buf[CCR_MONTH]) - 1; /* mon is 0-11 */
-+	tm->tm_year = BCD2BIN(buf[CCR_YEAR])
-+			+ (BCD2BIN(buf[CCR_Y2K]) * 100) - 1900;
-+	tm->tm_wday = buf[CCR_WDAY];
-+
-+	dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d, "
-+		"mday=%d, mon=%d, year=%d, wday=%d\n",
-+		__FUNCTION__,
-+		tm->tm_sec, tm->tm_min, tm->tm_hour,
-+		tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
-+
-+	return 0;
-+}
-+
-+static int x1205_get_status(struct i2c_client *client, unsigned char *sr)
-+{
-+	static unsigned char sr_addr[2] = { 0, X1205_REG_SR };
-+
-+	struct i2c_msg msgs[] = {
-+		{ client->addr, 0, 2, sr_addr },	/* setup read ptr */
-+		{ client->addr, I2C_M_RD, 1, sr },	/* read status */
-+	};
-+
-+	/* read status register */
-+	if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) {
-+		dev_err(&client->dev, "%s: read error\n", __FUNCTION__);
-+		return -EIO;
-+	}
-+
-+	return 0;
-+}
-+
-+static int x1205_set_datetime(struct i2c_client *client, struct rtc_time *tm,
-+				int datetoo, u8 reg_base)
-+{
-+	int i, xfer;
-+	unsigned char buf[8];
-+
-+	static const unsigned char wel[3] = { 0, X1205_REG_SR,
-+						X1205_SR_WEL };
-+
-+	static const unsigned char rwel[3] = { 0, X1205_REG_SR,
-+						X1205_SR_WEL | X1205_SR_RWEL };
-+
-+	static const unsigned char diswe[3] = { 0, X1205_REG_SR, 0 };
-+
-+	dev_dbg(&client->dev,
-+		"%s: secs=%d, mins=%d, hours=%d\n",
-+		__FUNCTION__,
-+		tm->tm_sec, tm->tm_min, tm->tm_hour);
-+
-+	buf[CCR_SEC] = BIN2BCD(tm->tm_sec);
-+	buf[CCR_MIN] = BIN2BCD(tm->tm_min);
-+
-+	/* set hour and 24hr bit */
-+	buf[CCR_HOUR] = BIN2BCD(tm->tm_hour) | X1205_HR_MIL;
-+
-+	/* should we also set the date? */
-+	if (datetoo) {
-+		dev_dbg(&client->dev,
-+			"%s: mday=%d, mon=%d, year=%d, wday=%d\n",
-+			__FUNCTION__,
-+			tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
-+
-+		buf[CCR_MDAY] = BIN2BCD(tm->tm_mday);
-+
-+		/* month, 1 - 12 */
-+		buf[CCR_MONTH] = BIN2BCD(tm->tm_mon + 1);
-+
-+		/* year, since the rtc epoch*/
-+		buf[CCR_YEAR] = BIN2BCD(tm->tm_year % 100);
-+		buf[CCR_WDAY] = tm->tm_wday & 0x07;
-+		buf[CCR_Y2K] = BIN2BCD(tm->tm_year / 100);
-+	}
-+
-+	/* this sequence is required to unlock the chip */
-+	xfer = i2c_master_send(client, wel, 3);
-+	if (xfer != 3) {
-+		dev_err(&client->dev, "%s: wel - %d\n", __FUNCTION__, xfer);
-+		return -EIO;
-+	}
-+
-+	xfer = i2c_master_send(client, rwel, 3);
-+	if (xfer != 3) {
-+		dev_err(&client->dev, "%s: rwel - %d\n", __FUNCTION__, xfer);
-+		return -EIO;
-+	}
-+
-+	/* write register's data */
-+	for (i = 0; i < (datetoo ? 8 : 3); i++) {
-+		unsigned char rdata[3] = { 0, reg_base + i, buf[i] };
-+
-+		xfer = i2c_master_send(client, rdata, 3);
-+		if (xfer != 3) {
-+			dev_err(&client->dev,
-+				"%s: xfer=%d addr=%02x, data=%02x\n",
-+				__FUNCTION__,
-+				 xfer, rdata[1], rdata[2]);
-+			return -EIO;
-+		}
-+	};
-+
-+	/* disable further writes */
-+	xfer = i2c_master_send(client, diswe, 3);
-+	if (xfer != 3) {
-+		dev_err(&client->dev, "%s: diswe - %d\n", __FUNCTION__, xfer);
-+		return -EIO;
-+	}
-+
-+	return 0;
-+}
-+
-+static int x1205_fix_osc(struct i2c_client *client)
-+{
-+	int err;
-+	struct rtc_time tm;
-+
-+	tm.tm_hour = 0;
-+	tm.tm_min = 0;
-+	tm.tm_sec = 0;
-+
-+	if ((err = x1205_set_datetime(client, &tm, 0, X1205_CCR_BASE)) < 0)
-+		dev_err(&client->dev,
-+			"unable to restart the clock\n");
-+
-+	return err;
-+}
-+
-+static int x1205_get_dtrim(struct i2c_client *client, int *trim)
-+{
-+	unsigned char dtr;
-+	static unsigned char dtr_addr[2] = { 0, X1205_REG_DTR };
-+
-+	struct i2c_msg msgs[] = {
-+		{ client->addr, 0, 2, dtr_addr },	/* setup read ptr */
-+		{ client->addr, I2C_M_RD, 1, &dtr }, 	/* read dtr */
-+	};
-+
-+	/* read dtr register */
-+	if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) {
-+		dev_err(&client->dev, "%s: read error\n", __FUNCTION__);
-+		return -EIO;
-+	}
-+
-+	dev_dbg(&client->dev, "%s: raw dtr=%x\n", __FUNCTION__, dtr);
-+
-+	*trim = 0;
-+
-+	if (dtr & X1205_DTR_DTR0)
-+		*trim += 20;
-+
-+	if (dtr & X1205_DTR_DTR1)
-+		*trim += 10;
-+
-+	if (dtr & X1205_DTR_DTR2)
-+		*trim = -*trim;
-+
-+	return 0;
-+}
-+
-+static int x1205_get_atrim(struct i2c_client *client, int *trim)
-+{
-+	s8 atr;
-+	static unsigned char atr_addr[2] = { 0, X1205_REG_ATR };
-+
-+	struct i2c_msg msgs[] = {
-+		{ client->addr, 0, 2, atr_addr },	/* setup read ptr */
-+		{ client->addr, I2C_M_RD, 1, &atr }, 	/* read atr */
-+	};
-+
-+	/* read atr register */
-+	if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) {
-+		dev_err(&client->dev, "%s: read error\n", __FUNCTION__);
-+		return -EIO;
-+	}
-+
-+	dev_dbg(&client->dev, "%s: raw atr=%x\n", __FUNCTION__, atr);
-+
-+	/* atr is a two's complement value on 6 bits,
-+	 * perform sign extension. The formula is
-+	 * Catr = (atr * 0.25pF) + 11.00pF.
-+	 */
-+	if (atr & 0x20)
-+		atr |= 0xC0;
-+
-+	dev_dbg(&client->dev, "%s: raw atr=%x (%d)\n", __FUNCTION__, atr, atr);
-+
-+	*trim = (atr * 250) + 11000;
-+
-+	dev_dbg(&client->dev, "%s: real=%d\n", __FUNCTION__, *trim);
-+
-+	return 0;
-+}
-+
-+static int x1205_hctosys(struct i2c_client *client)
-+{
-+	int err;
-+
-+	struct rtc_time tm;
-+	struct timespec tv;
-+	unsigned char sr;
-+
-+	if ((err = x1205_get_status(client, &sr)) < 0)
-+		return err;
-+
-+	/* Don't set if we had a power failure */
-+	if (sr & X1205_SR_RTCF)
-+		return -EINVAL;
-+
-+	if ((err = x1205_get_datetime(client, &tm, X1205_CCR_BASE)) < 0)
-+		return err;
-+
-+	/* IMPORTANT: the RTC only stores whole seconds. It is arbitrary
-+	 * whether it stores the most close value or the value with partial
-+	 * seconds truncated. However, it is important that we use it to store
-+	 * the truncated value. This is because otherwise it is necessary,
-+	 * in an rtc sync function, to read both xtime.tv_sec and
-+	 * xtime.tv_nsec. On some processors (i.e. ARM), an atomic read
-+	 * of >32bits is not possible. So storing the most close value would
-+	 * slow down the sync API. So here we have the truncated value and
-+	 * the best guess is to add 0.5s.
-+	 */
-+
-+	tv.tv_nsec = NSEC_PER_SEC >> 1;
-+
-+	rtc_tm_to_time(&tm, &tv.tv_sec);
-+
-+	do_settimeofday(&tv);
-+
-+	dev_info(&client->dev,
-+		"setting the system clock to %d-%d-%d %d:%d:%d\n",
-+		tm.tm_year + 1900, tm.tm_mon + 1,
-+		tm.tm_mday, tm.tm_hour, tm.tm_min,
-+		tm.tm_sec);
-+
-+	return 0;
-+}
-+
-+struct x1205_limit
-+{
-+	unsigned char reg;
-+	unsigned char mask;
-+	unsigned char min;
-+	unsigned char max;
-+};
-+
-+static int x1205_validate_client(struct i2c_client *client)
-+{
-+	int i, xfer;
-+
-+	/* Probe array. We will read the register at the specified
-+	 * address and check if the given bits are zero.
-+	 */
-+	static const unsigned char probe_zero_pattern[] = {
-+		/* register, mask */
-+		X1205_REG_SR,	0x18,
-+		X1205_REG_DTR,	0xF8,
-+		X1205_REG_ATR,	0xC0,
-+		X1205_REG_INT,	0x18,
-+		X1205_REG_0,	0xFF,
-+	};
-+
-+	static const struct x1205_limit probe_limits_pattern[] = {
-+		/* register, mask, min, max */
-+		{ X1205_REG_Y2K,	0xFF,	19,	20	},
-+		{ X1205_REG_DW,		0xFF,	0,	6	},
-+		{ X1205_REG_YR,		0xFF,	0,	99	},
-+		{ X1205_REG_MO,		0xFF,	0,	12	},
-+		{ X1205_REG_DT,		0xFF,	0,	31	},
-+		{ X1205_REG_HR,		0x7F,	0,	23	},
-+		{ X1205_REG_MN,		0xFF,	0,	59	},
-+		{ X1205_REG_SC,		0xFF,	0,	59	},
-+		{ X1205_REG_Y2K1,	0xFF,	19,	20	},
-+		{ X1205_REG_Y2K0,	0xFF,	19,	20	},
-+	};
-+
-+	/* check that registers have bits a 0 where expected */
-+	for (i = 0; i < ARRAY_SIZE(probe_zero_pattern); i += 2) {
-+		unsigned char buf;
-+
-+		unsigned char addr[2] = { 0, probe_zero_pattern[i] };
-+
-+		struct i2c_msg msgs[2] = {
-+			{ client->addr, 0, 2, addr },
-+			{ client->addr, I2C_M_RD, 1, &buf },
-+		};
-+
-+		xfer = i2c_transfer(client->adapter, msgs, 2);
-+		if (xfer != 2) {
-+			dev_err(&client->adapter->dev,
-+				"%s: could not read register %x\n",
-+				__FUNCTION__, addr[1]);
-+
-+			return -EIO;
-+		}
-+
-+		if ((buf & probe_zero_pattern[i+1]) != 0) {
-+			dev_err(&client->adapter->dev,
-+				"%s: register=%02x, zero pattern=%d, value=%x\n",
-+				__FUNCTION__, addr[1], i, buf);
-+
-+			return -ENODEV;
-+		}
-+	}
-+
-+	/* check limits (only registers with bcd values) */
-+	for (i = 0; i < ARRAY_SIZE(probe_limits_pattern); i++) {
-+		unsigned char reg, value;
-+
-+		unsigned char addr[2] = { 0, probe_limits_pattern[i].reg };
-+
-+		struct i2c_msg msgs[2] = {
-+			{ client->addr, 0, 2, addr },
-+			{ client->addr, I2C_M_RD, 1, &reg },
-+		};
-+
-+		xfer = i2c_transfer(client->adapter, msgs, 2);
-+
-+		if (xfer != 2) {
-+			dev_err(&client->adapter->dev,
-+				"%s: could not read register %x\n",
-+				__FUNCTION__, addr[1]);
-+
-+			return -EIO;
-+		}
-+
-+		value = BCD2BIN(reg & probe_limits_pattern[i].mask);
-+
-+		if (value > probe_limits_pattern[i].max ||
-+			value < probe_limits_pattern[i].min) {
-+			dev_dbg(&client->adapter->dev,
-+				"%s: register=%x, lim pattern=%d, value=%d\n",
-+				__FUNCTION__, addr[1], i, value);
-+
-+			return -ENODEV;
-+		}
-+	}
-+
-+	return 0;
-+}
-+
-+static int x1205_rtc_read_alarm(struct device *dev,
-+	struct rtc_wkalrm *alrm)
-+{
-+	return x1205_get_datetime(to_i2c_client(dev),
-+		&alrm->time, X1205_ALM0_BASE);
-+}
-+
-+static int x1205_rtc_set_alarm(struct device *dev,
-+	struct rtc_wkalrm *alrm)
-+{
-+	return x1205_set_datetime(to_i2c_client(dev),
-+		&alrm->time, 1, X1205_ALM0_BASE);
-+}
-+
-+static int x1205_rtc_read_time(struct device *dev,
-+	struct rtc_time *tm)
-+{
-+	return x1205_get_datetime(to_i2c_client(dev),
-+		tm, X1205_CCR_BASE);
-+}
-+
-+static int x1205_rtc_set_time(struct device *dev,
-+	struct rtc_time *tm)
-+{
-+	return x1205_set_datetime(to_i2c_client(dev),
-+		tm, 1, X1205_CCR_BASE);
-+}
-+
-+static int x1205_rtc_set_mmss(struct device *dev, unsigned long secs)
-+{
-+	int err;
-+
-+	struct rtc_time new_tm, old_tm;
-+
-+	if ((err = x1205_rtc_read_time(dev, &old_tm) == 0))
-+		return err;
-+
-+	/* FIXME      xtime.tv_nsec = old_tm.tm_sec * 10000000; */
-+	new_tm.tm_sec  = secs % 60;
-+	secs /= 60;
-+	new_tm.tm_min  = secs % 60;
-+	secs /= 60;
-+	new_tm.tm_hour = secs % 24;
-+
-+       /*
-+	* avoid writing when we're going to change the day
-+	* of the month.  We will retry in the next minute.
-+	* This basically means that if the RTC must not drift
-+	* by more than 1 minute in 11 minutes.
-+	*/
-+	if ((old_tm.tm_hour == 23 && old_tm.tm_min == 59) ||
-+	    (new_tm.tm_hour == 23 && new_tm.tm_min == 59))
-+		return 1;
-+
-+	return x1205_rtc_set_time(dev, &new_tm);
-+}
-+
-+static int x1205_rtc_proc(struct device *dev, struct seq_file *seq)
-+{
-+	int err, dtrim, atrim;
-+
-+	seq_printf(seq, "24hr\t\t: yes\n");
-+
-+	err = x1205_get_dtrim(to_i2c_client(dev), &dtrim);
-+	if (err == 0)
-+		seq_printf(seq, "digital_trim\t: %d ppm\n", dtrim);
-+
-+	err = x1205_get_atrim(to_i2c_client(dev), &atrim);
-+	if (err == 0)
-+		seq_printf(seq, "analog_trim\t: %d.%02d pF\n",
-+			atrim / 1000, atrim % 1000);
-+	return 0;
-+}
-+
-+static struct rtc_class_ops x1205_rtc_ops = {
-+	.proc = x1205_rtc_proc,
-+	.read_time = x1205_rtc_read_time,
-+	.set_time = x1205_rtc_set_time,
-+	.read_alarm = x1205_rtc_read_alarm,
-+	.set_alarm = x1205_rtc_set_alarm,
-+	.set_mmss = x1205_rtc_set_mmss,
-+};
-+
-+static ssize_t x1205_sysfs_show_atrim(struct device *dev,
-+				struct device_attribute *attr, char *buf)
-+{
-+	int atrim;
-+
-+        if (x1205_get_atrim(to_i2c_client(dev), &atrim) == 0) {
-+                return sprintf(buf, "%d.%02d pF\n",
-+                        atrim / 1000, atrim % 1000);        }
-+        return 0;
-+}
-+static DEVICE_ATTR(atrim, S_IRUGO, x1205_sysfs_show_atrim, NULL);
-+
-+static ssize_t x1205_sysfs_show_dtrim(struct device *dev,
-+				struct device_attribute *attr, char *buf)
-+{
-+	int dtrim;
-+
-+        if (x1205_get_dtrim(to_i2c_client(dev), &dtrim) == 0) {
-+                return sprintf(buf, "%d ppm\n", dtrim);
-+        }
-+        return 0;
-+}
-+static DEVICE_ATTR(dtrim, S_IRUGO, x1205_sysfs_show_dtrim, NULL);
-+
-+
-+static int x1205_attach(struct i2c_adapter *adapter)
-+{
-+	dev_dbg(&adapter->dev, "%s\n", __FUNCTION__);
-+
-+	return i2c_probe(adapter, &addr_data, x1205_probe);
-+}
-+
-+static int x1205_probe(struct i2c_adapter *adapter, int address, int kind)
-+{
-+	int err = 0;
-+	unsigned char sr;
-+	struct i2c_client *client;
-+	struct rtc_device *rtc;
-+
-+	dev_dbg(&adapter->dev, "%s\n", __FUNCTION__);
-+
-+	if (!i2c_check_functionality(adapter, I2C_FUNC_I2C)) {
-+		err = -ENODEV;
-+		goto exit;
-+	}
-+
-+	if (!(client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL))) {
-+		err = -ENOMEM;
-+		goto exit;
-+	}
-+
-+	/* I2C client */
-+	client->addr = address;
-+	client->driver = &x1205_driver;
-+	client->adapter	= adapter;
-+
-+	strlcpy(client->name, x1205_driver.name, I2C_NAME_SIZE);
-+
-+	/* Verify the chip is really an X1205 */
-+	if (kind < 0) {
-+		if (x1205_validate_client(client) < 0) {
-+			err = -ENODEV;
-+			goto exit_kfree;
-+		}
-+	}
-+
-+	/* Inform the i2c layer */
-+	if ((err = i2c_attach_client(client)))
-+		goto exit_kfree;
-+
-+	dev_info(&client->dev, "chip found, driver version " DRV_VERSION "\n");
-+
-+	rtc = rtc_device_register(x1205_driver.name, &client->dev,
-+				&x1205_rtc_ops, THIS_MODULE);
-+
-+	if (IS_ERR(rtc)) {
-+		err = PTR_ERR(rtc);
-+		dev_err(&client->dev,
-+			"unable to register the class device\n");
-+		goto exit_detach;
-+	}
-+
-+	i2c_set_clientdata(client, rtc);
-+
-+	/* Check for power failures and eventualy enable the osc */
-+	if ((err = x1205_get_status(client, &sr)) == 0) {
-+		if (sr & X1205_SR_RTCF) {
-+			dev_err(&client->dev,
-+				"power failure detected, "
-+				"please set the clock\n");
-+			udelay(50);
-+			x1205_fix_osc(client);
-+		}
-+	}
-+	else
-+		dev_err(&client->dev, "couldn't read status\n");
-+
-+	/* If requested, set the system time */
-+	if (hctosys) {
-+		if ((err = x1205_hctosys(client)) < 0)
-+			dev_err(&client->dev,
-+				"unable to set the system clock\n");
-+	}
-+
-+	device_create_file(&client->dev, &dev_attr_atrim);
-+	device_create_file(&client->dev, &dev_attr_dtrim);
-+
-+	return 0;
-+
-+exit_detach:
-+	i2c_detach_client(client);
-+
-+exit_kfree:
-+	kfree(client);
-+
-+exit:
-+	return err;
-+}
-+
-+static int x1205_detach(struct i2c_client *client)
-+{
-+	int err;
-+	struct rtc_device *rtc = i2c_get_clientdata(client);
-+
-+	dev_dbg(&client->dev, "%s\n", __FUNCTION__);
-+
-+ 	if (rtc)
-+		rtc_device_unregister(rtc);
-+
-+	if ((err = i2c_detach_client(client)))
-+		return err;
-+
-+	kfree(client);
-+
-+	return 0;
-+}
-+
-+static int __init x1205_init(void)
-+{
-+	return i2c_add_driver(&x1205_driver);
-+}
-+
-+static void __exit x1205_exit(void)
-+{
-+	i2c_del_driver(&x1205_driver);
-+}
-+
-+MODULE_AUTHOR(
-+	"Karen Spearel <kas11@tampabay.rr.com>, "
-+	"Alessandro Zummo <a.zummo@towertech.it>");
-+MODULE_DESCRIPTION("Xicor/Intersil X1205 RTC driver");
-+MODULE_LICENSE("GPL");
-+MODULE_VERSION(DRV_VERSION);
-+
-+module_init(x1205_init);
-+module_exit(x1205_exit);
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-nslu2/drivers/rtc/rtc-test.c	2006-01-04 01:27:19.000000000 +0100
-@@ -0,0 +1,189 @@
-+/*
-+ * An RTC test device/driver
-+ * Copyright (C) 2005 Tower Technologies
-+ * Author: Alessandro Zummo <a.zummo@towertech.it>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/err.h>
-+#include <linux/rtc.h>
-+#include <linux/platform_device.h>
-+
-+static int test_rtc_read_alarm(struct device *dev,
-+	struct rtc_wkalrm *alrm)
-+{
-+	return 0;
-+}
-+
-+static int test_rtc_set_alarm(struct device *dev,
-+	struct rtc_wkalrm *alrm)
-+{
-+	return 0;
-+}
-+
-+static int test_rtc_read_time(struct device *dev,
-+	struct rtc_time *tm)
-+{
-+	rtc_time_to_tm(get_seconds(), tm);
-+	return 0;
-+}
-+
-+static int test_rtc_set_time(struct device *dev,
-+	struct rtc_time *tm)
-+{
-+	return 0;
-+}
-+
-+static int test_rtc_set_mmss(struct device *dev, unsigned long secs)
-+{
-+	return 0;
-+}
-+
-+static int test_rtc_proc(struct device *dev, struct seq_file *seq)
-+{
-+	struct platform_device *plat_dev = to_platform_device(dev);
-+
-+	seq_printf(seq, "24hr\t\t: yes\n");
-+	seq_printf(seq, "test\t\t: yes\n");
-+	seq_printf(seq, "id\t\t: %d\n", plat_dev->id);
-+
-+	return 0;
-+}
-+
-+static int test_rtc_ioctl(struct device *dev, unsigned int cmd,
-+	unsigned long arg)
-+{
-+	/* We do support interrupts, they're generated
-+	 * using the sysfs interface.
-+	 */
-+	switch (cmd) {
-+	case RTC_PIE_ON:
-+	case RTC_PIE_OFF:
-+	case RTC_UIE_ON:
-+	case RTC_UIE_OFF:
-+	case RTC_AIE_ON:
-+	case RTC_AIE_OFF:
-+		return 0;
-+
-+	default:
-+		return -EINVAL;
-+	}
-+}
-+
-+static struct rtc_class_ops test_rtc_ops = {
-+	.proc = test_rtc_proc,
-+	.read_time = test_rtc_read_time,
-+	.set_time = test_rtc_set_time,
-+	.read_alarm = test_rtc_read_alarm,
-+	.set_alarm = test_rtc_set_alarm,
-+	.set_mmss = test_rtc_set_mmss,
-+	.ioctl = test_rtc_ioctl,
-+};
-+
-+static ssize_t test_irq_show(struct device *dev,
-+				struct device_attribute *attr, char *buf)
-+{
-+	return sprintf(buf, "%d\n", 42);
-+}
-+static ssize_t test_irq_store(struct device *dev,
-+				struct device_attribute *attr,
-+				const char *buf, size_t count)
-+{
-+	int retval;
-+	struct platform_device *plat_dev = to_platform_device(dev);
-+	struct rtc_device *rtc = platform_get_drvdata(plat_dev);
-+
-+	retval = count;
-+	if (strncmp(buf, "tick", 4) == 0)
-+		rtc_update_irq(&rtc->class_dev, 1, RTC_PF | RTC_IRQF);
-+	else if (strncmp(buf, "alarm", 5) == 0)
-+		rtc_update_irq(&rtc->class_dev, 1, RTC_AF | RTC_IRQF);
-+	else if (strncmp(buf, "update", 6) == 0)
-+		rtc_update_irq(&rtc->class_dev, 1, RTC_UF | RTC_IRQF);
-+	else
-+		retval = -EINVAL;
-+
-+	return retval;
-+}
-+static DEVICE_ATTR(irq, S_IRUGO | S_IWUSR, test_irq_show, test_irq_store);
-+
-+static int test_probe(struct platform_device *plat_dev)
-+{
-+	int err;
-+	struct rtc_device *rtc = rtc_device_register("test", &plat_dev->dev,
-+						&test_rtc_ops, THIS_MODULE);
-+	if (IS_ERR(rtc)) {
-+		err = PTR_ERR(rtc);
-+		dev_err(&plat_dev->dev,
-+			"unable to register the class device\n");
-+		return err;
-+	}
-+	device_create_file(&plat_dev->dev, &dev_attr_irq);
-+
-+	platform_set_drvdata(plat_dev, rtc);
-+
-+	return 0;
-+}
-+
-+static int test_remove(struct platform_device *plat_dev)
-+{
-+	struct rtc_device *rtc = platform_get_drvdata(plat_dev);
-+
-+	rtc_device_unregister(rtc);
-+	device_remove_file(&plat_dev->dev, &dev_attr_irq);
-+
-+	return 0;
-+}
-+
-+static void test_release(struct device * dev)
-+{
-+}
-+
-+struct platform_device test_dev_zero = {
-+	.name	= "rtc-test",
-+	.id	= 0,
-+	.dev.release = test_release,
-+};
-+
-+struct platform_device test_dev_one = {
-+	.name	= "rtc-test",
-+	.id	= 1,
-+	.dev.release = test_release,
-+};
-+
-+struct platform_driver test_drv = {
-+	.probe	= test_probe,
-+	.remove = test_remove,
-+	.driver = {
-+		.name = "rtc-test",
-+		.owner = THIS_MODULE,
-+	},
-+};
-+
-+static int __init test_init(void)
-+{
-+	platform_device_register(&test_dev_zero);
-+	platform_device_register(&test_dev_one);
-+	platform_driver_register(&test_drv);
-+
-+	return 0;
-+}
-+
-+static void __exit test_exit(void)
-+{
-+	platform_driver_unregister(&test_drv);
-+	platform_device_unregister(&test_dev_zero);
-+	platform_device_unregister(&test_dev_one);
-+}
-+
-+MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>");
-+MODULE_DESCRIPTION("RTC test driver/device");
-+MODULE_LICENSE("GPL");
-+
-+module_init(test_init);
-+module_exit(test_exit);
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-nslu2/drivers/rtc/rtc-ds1672.c	2006-01-04 01:27:21.000000000 +0100
-@@ -0,0 +1,266 @@
-+/*
-+ * An rtc/i2c driver for the Dallas DS1672
-+ * Copyright 2005 Alessandro Zummo
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/i2c.h>
-+#include <linux/rtc.h>
-+
-+#define DRV_VERSION "0.1"
-+
-+/* Addresses to scan: none. This chip cannot be detected. */
-+static unsigned short normal_i2c[] = { I2C_CLIENT_END };
-+
-+/* Insmod parameters */
-+I2C_CLIENT_INSMOD;
-+I2C_CLIENT_MODULE_PARM(hctosys,
-+	"Set the system time from the hardware clock upon initialization");
-+
-+/* Registers */
-+
-+#define DS1672_REG_CNT_BASE	0
-+#define DS1672_REG_CONTROL	4
-+#define DS1672_REG_TRICKLE	5
-+
-+
-+/* Prototypes */
-+static int ds1672_probe(struct i2c_adapter *adapter, int address, int kind);
-+
-+/*
-+ * In the routines that deal directly with the ds1672 hardware, we use
-+ * rtc_time -- month 0-11, hour 0-23, yr = calendar year-epoch
-+ * Epoch is initialized as 2000. Time is set to UTC.
-+ */
-+static int ds1672_get_datetime(struct i2c_client *client, struct rtc_time *tm)
-+{
-+	unsigned long time;
-+	unsigned char buf[4];
-+
-+	dev_dbg(&client->dev,
-+		"%s: raw read data - counters=%02x,%02x,%02x,%02x\n"
-+		__FUNCTION__,
-+		buf[0], buf[1], buf[2], buf[3]);
-+
-+	time = (buf[3] << 24) | (buf[2] << 16) | (buf[1] << 8) | buf[0];
-+
-+	rtc_time_to_tm(time, tm);
-+
-+	dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d, "
-+		"mday=%d, mon=%d, year=%d, wday=%d\n",
-+		__FUNCTION__,
-+		tm->tm_sec, tm->tm_min, tm->tm_hour,
-+		tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
-+
-+	return 0;
-+}
-+
-+static int ds1672_set_mmss(struct i2c_client *client, unsigned long secs)
-+{
-+	int xfer;
-+	unsigned char buf[5];
-+
-+	buf[0] = DS1672_REG_CNT_BASE;
-+	buf[1] = secs & 0x000000FF;
-+	buf[2] = (secs & 0x0000FF00) >> 8;
-+	buf[3] = (secs & 0x00FF0000) >> 16;
-+	buf[4] = (secs & 0xFF000000) >> 24;
-+
-+	xfer = i2c_master_send(client, buf, 5);
-+	if (xfer != 5) {
-+		dev_err(&client->dev, "%s: send: %d\n", __FUNCTION__, xfer);
-+		return -EIO;
-+	}
-+
-+	return 0;
-+}
-+
-+static int ds1672_set_datetime(struct i2c_client *client, struct rtc_time *tm)
-+{
-+	unsigned long secs;
-+
-+	dev_dbg(&client->dev,
-+		"%s: secs=%d, mins=%d, hours=%d, ",
-+		"mday=%d, mon=%d, year=%d, wday=%d\n",
-+		__FUNCTION__,
-+		tm->tm_sec, tm->tm_min, tm->tm_hour,
-+		tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
-+
-+	rtc_tm_to_time(tm, &secs);
-+
-+	return ds1672_set_mmss(client, secs);
-+}
-+
-+static int ds1672_hctosys(struct i2c_client *client)
-+{
-+	int err;
-+	struct rtc_time tm;
-+	struct timespec tv;
-+
-+	if ((err = ds1672_get_datetime(client, &tm)) != 0)
-+		return err;
-+
-+	/* IMPORTANT: the RTC only stores whole seconds. It is arbitrary
-+	 * whether it stores the most close value or the value with partial
-+	 * seconds truncated. However, it is important that we use it to store
-+	 * the truncated value. This is because otherwise it is necessary,
-+	 * in an rtc sync function, to read both xtime.tv_sec and
-+	 * xtime.tv_nsec. On some processors (i.e. ARM), an atomic read
-+	 * of >32bits is not possible. So storing the most close value would
-+	 * slow down the sync API. So here we have the truncated value and
-+	 * the best guess is to add 0.5s.
-+	 */
-+
-+	tv.tv_nsec = NSEC_PER_SEC >> 1;
-+
-+	rtc_tm_to_time(&tm, &tv.tv_sec);
-+
-+	do_settimeofday(&tv);
-+
-+	dev_info(&client->dev,
-+		"setting the system clock to %d-%02d-%02d %02d:%02d:%02d\n",
-+		tm.tm_year + 1900, tm.tm_mon + 1,
-+		tm.tm_mday, tm.tm_hour, tm.tm_min,
-+		tm.tm_sec);
-+
-+	return 0;
-+}
-+
-+static int ds1672_rtc_read_time(struct device *dev, struct rtc_time *tm)
-+{
-+	return ds1672_get_datetime(to_i2c_client(dev), tm);
-+}
-+
-+static int ds1672_rtc_set_time(struct device *dev, struct rtc_time *tm)
-+{
-+	return ds1672_set_datetime(to_i2c_client(dev), tm);
-+}
-+
-+static int ds1672_rtc_set_mmss(struct device *dev, unsigned long secs)
-+{
-+	return ds1672_set_mmss(to_i2c_client(dev), secs);
-+}
-+
-+static struct rtc_class_ops ds1672_rtc_ops = {
-+	.read_time = ds1672_rtc_read_time,
-+	.set_time = ds1672_rtc_set_time,
-+	.set_mmss = ds1672_rtc_set_mmss,
-+};
-+
-+static int ds1672_attach(struct i2c_adapter *adapter)
-+{
-+	dev_dbg(&adapter->dev, "%s\n", __FUNCTION__);
-+
-+	return i2c_probe(adapter, &addr_data, ds1672_probe);
-+}
-+
-+static int ds1672_detach(struct i2c_client *client)
-+{
-+	int err;
-+	struct rtc_device *rtc = i2c_get_clientdata(client);
-+
-+	dev_dbg(&client->dev, "%s\n", __FUNCTION__);
-+
-+ 	if (rtc)
-+		rtc_device_unregister(rtc);
-+
-+	if ((err = i2c_detach_client(client)))
-+		return err;
-+
-+	kfree(client);
-+
-+	return 0;
-+}
-+
-+static struct i2c_driver ds1672_driver = {
-+	.owner		= THIS_MODULE,
-+	.name		= "ds1672",
-+	.flags		= I2C_DF_NOTIFY,
-+	.attach_adapter = &ds1672_attach,
-+	.detach_client	= &ds1672_detach,
-+};
-+
-+static int ds1672_probe(struct i2c_adapter *adapter, int address, int kind)
-+{
-+	int err = 0;
-+	struct i2c_client *client;
-+	struct rtc_device *rtc;
-+
-+	dev_dbg(&adapter->dev, "%s\n", __FUNCTION__);
-+
-+	if (!i2c_check_functionality(adapter, I2C_FUNC_I2C)) {
-+		err = -ENODEV;
-+		goto exit;
-+	}
-+
-+	if (!(client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL))) {
-+		err = -ENOMEM;
-+		goto exit;
-+	}
-+
-+	/* I2C client */
-+	client->addr = address;
-+	client->driver = &ds1672_driver;
-+	client->adapter	= adapter;
-+
-+	strlcpy(client->name, ds1672_driver.name, I2C_NAME_SIZE);
-+
-+	/* Inform the i2c layer */
-+	if ((err = i2c_attach_client(client)))
-+		goto exit_kfree;
-+
-+	dev_info(&client->dev, "chip found, driver version " DRV_VERSION "\n");
-+
-+	rtc = rtc_device_register(ds1672_driver.name, &client->dev,
-+				&ds1672_rtc_ops, THIS_MODULE);
-+
-+	if (IS_ERR(rtc)) {
-+		err = PTR_ERR(rtc);
-+		dev_err(&client->dev,
-+			"unable to register the class device\n");
-+		goto exit_detach;
-+	}
-+
-+	i2c_set_clientdata(client, rtc);
-+
-+	/* If requested, set the system time */
-+	if (hctosys) {
-+		if ((err = ds1672_hctosys(client)) < 0)
-+			dev_err(&client->dev,
-+				"unable to set the system clock\n");
-+	}
-+
-+	return 0;
-+
-+exit_detach:
-+	i2c_detach_client(client);
-+
-+exit_kfree:
-+	kfree(client);
-+
-+exit:
-+	return err;
-+}
-+
-+static int __init ds1672_init(void)
-+{
-+	return i2c_add_driver(&ds1672_driver);
-+}
-+
-+static void __exit ds1672_exit(void)
-+{
-+	i2c_del_driver(&ds1672_driver);
-+}
-+
-+MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>");
-+MODULE_DESCRIPTION("Dallas/Maxim DS1672 timekeeper driver");
-+MODULE_LICENSE("GPL");
-+MODULE_VERSION(DRV_VERSION);
-+
-+module_init(ds1672_init);
-+module_exit(ds1672_exit);
diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6.15/60-nslu2-beeper.patch b/packages/obsolete/nslu2/nslu2-kernel/2.6.15/60-nslu2-beeper.patch
deleted file mode 100644
index 12fdc4d96e..0000000000
--- a/packages/obsolete/nslu2/nslu2-kernel/2.6.15/60-nslu2-beeper.patch
+++ /dev/null
@@ -1,184 +0,0 @@
- drivers/input/misc/Kconfig     |   12 +++
- drivers/input/misc/Makefile    |    1 
- drivers/input/misc/nslu2spkr.c |  148 +++++++++++++++++++++++++++++++++++++++++
- 3 files changed, 161 insertions(+)
-
---- linux-2.6.15/drivers/input/misc/Kconfig	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.15/drivers/input/misc/Kconfig	1970-01-01 00:00:00.000000000 +0000
-@@ -40,6 +40,18 @@ config INPUT_M68K_BEEP
- 	tristate "M68k Beeper support"
- 	depends on M68K
- 
-+config INPUT_NSLU2_BEEPER
-+	tristate "NSLU2 Beeper support"
-+	depends on MACH_NSLU2
-+	help
-+	  Say Y here if you want the embedded beeper on the LinkSys NSLU2
-+	  to be used for bells and whistles.
-+
-+	  If unsure, say Y.
-+
-+	  To compile this driver as a module, choose M here: the
-+	  module will be called nslu2spkr.
-+
- config INPUT_UINPUT
- 	tristate "User level driver support"
- 	help
---- linux-2.6.15/drivers/input/misc/Makefile	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.15/drivers/input/misc/Makefile	1970-01-01 00:00:00.000000000 +0000
-@@ -10,3 +10,4 @@ obj-$(CONFIG_INPUT_M68K_BEEP)		+= m68ksp
- obj-$(CONFIG_INPUT_98SPKR)		+= 98spkr.o
- obj-$(CONFIG_INPUT_UINPUT)		+= uinput.o
- obj-$(CONFIG_HP_SDC_RTC)		+= hp_sdc_rtc.o
-+obj-$(CONFIG_INPUT_NSLU2_BEEPER)	+= nslu2spkr.o
---- linux-2.6.15/drivers/input/misc/nslu2spkr.c	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.15/drivers/input/misc/nslu2spkr.c	1970-01-01 00:00:00.000000000 +0000
-@@ -0,0 +1,148 @@
-+/*
-+ * drivers/input/misc/nslu2spkr.c
-+ *
-+ * NSLU2 Beeper driver
-+ *
-+ * Copyright (C) 2005 Tower Technologies
-+ *
-+ * based on nslu2-io.c
-+ *  Copyright (C) 2004 Karen Spearel
-+ *
-+ * Author: Alessandro Zummo <a.zummo@towertech.it>
-+ * Maintainers: http://www.nslu2-linux.org/
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/config.h>
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/input.h>
-+#include <linux/delay.h>
-+
-+#include <asm/hardware.h>
-+#include <asm/irq.h>
-+#include <asm/mach-types.h>
-+
-+static unsigned int beep_on_startup = 1;
-+module_param(beep_on_startup, bool, 0);
-+MODULE_PARM_DESC(beep_on_startup, "Play a beep on module startup");
-+
-+DEFINE_SPINLOCK(beep_lock);
-+
-+static int nslu2_spkr_event(struct input_dev *dev, unsigned int type, unsigned int code, int value)
-+{
-+	unsigned int count = 0;
-+	unsigned long flags;
-+
-+	if (type != EV_SND)
-+		return -1;
-+
-+	switch (code) {
-+		case SND_BELL:
-+			if (value) value = 1000;
-+		case SND_TONE:
-+			break;
-+		default:
-+			return -1;
-+	}
-+
-+	if (value > 20 && value < 32767)
-+		count = (NSLU2_FREQ / (value*4)) - 1;
-+
-+	spin_lock_irqsave(&beep_lock, flags);
-+
-+	 if (count) {
-+
-+		gpio_line_config(NSLU2_GPIO_BUZZ, IXP4XX_GPIO_OUT);
-+		gpio_line_set(NSLU2_GPIO_BUZZ, IXP4XX_GPIO_LOW);
-+
-+		*IXP4XX_OSRT2 = (count & ~IXP4XX_OST_RELOAD_MASK) | IXP4XX_OST_ENABLE;
-+
-+	} else {
-+
-+		gpio_line_config(NSLU2_GPIO_BUZZ, IXP4XX_GPIO_IN);
-+		gpio_line_set(NSLU2_GPIO_BUZZ, IXP4XX_GPIO_HIGH);
-+
-+		*IXP4XX_OSRT2 = 0;
-+	}
-+
-+	spin_unlock_irqrestore(&beep_lock, flags);
-+
-+	return 0;
-+}
-+
-+static struct input_dev nslu2_spkr_dev = {
-+	.phys		= "ixp420/gpio4",
-+	.name		= "NSLU2 Beeper",
-+	.evbit[0]	= BIT(EV_SND),
-+	.sndbit[0]	= BIT(SND_BELL) | BIT(SND_TONE),
-+	.event		= nslu2_spkr_event,
-+	.id		= {
-+		.bustype	= BUS_HOST,
-+		.vendor		= 0x001f,
-+		.product	= 0x0001,
-+		.version	= 0x0100
-+	}
-+};
-+
-+static irqreturn_t nslu2_spkr_handler(int irq, void *dev_id, struct pt_regs *regs)
-+{
-+	/* clear interrupt */
-+	*IXP4XX_OSST = IXP4XX_OSST_TIMER_2_PEND;
-+
-+	/* flip the beeper output */
-+	*IXP4XX_GPIO_GPOUTR ^= NSLU2_BZ_BM;
-+
-+	return IRQ_HANDLED;
-+}
-+
-+static int __init nslu2_spkr_init(void)
-+{
-+	if (!(machine_is_nslu2()))
-+		return -ENODEV;
-+
-+	if (request_irq(IRQ_IXP4XX_TIMER2, &nslu2_spkr_handler,
-+		SA_INTERRUPT | SA_TIMER, "nslu2-beeper", NULL < 0)) {
-+
-+		printk(KERN_INFO "NSLU2 beeper: IRQ %d not available\n",
-+			IRQ_IXP4XX_TIMER2);
-+
-+		return -EIO;
-+	}
-+
-+	input_register_device(&nslu2_spkr_dev);
-+
-+	/* do a little beep to tell the world we are alive */
-+	if (beep_on_startup)
-+	{
-+		nslu2_spkr_event(NULL, EV_SND, SND_TONE, 440);
-+		msleep(120);
-+		nslu2_spkr_event(NULL, EV_SND, SND_TONE, 0);
-+	}
-+
-+        printk(KERN_INFO "NSLU2: beeper\n");
-+	return 0;
-+}
-+
-+static void __exit nslu2_spkr_exit(void)
-+{
-+	input_unregister_device(&nslu2_spkr_dev);
-+
-+	disable_irq(IRQ_IXP4XX_TIMER2);
-+
-+	/* turn it off */
-+	nslu2_spkr_event(NULL, EV_SND, SND_BELL, 0);
-+
-+	free_irq(IRQ_IXP4XX_TIMER2, NULL);
-+}
-+
-+module_init(nslu2_spkr_init);
-+module_exit(nslu2_spkr_exit);
-+
-+MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>");
-+MODULE_DESCRIPTION("NSLU2 Beeper driver");
-+MODULE_LICENSE("GPL");
diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6.15/75-nslu2-leds.patch b/packages/obsolete/nslu2/nslu2-kernel/2.6.15/75-nslu2-leds.patch
deleted file mode 100644
index 7497409e77..0000000000
--- a/packages/obsolete/nslu2/nslu2-kernel/2.6.15/75-nslu2-leds.patch
+++ /dev/null
@@ -1,272 +0,0 @@
- arch/arm/Kconfig                  |    8 -
- arch/arm/mach-ixp4xx/Makefile     |    4 
- arch/arm/mach-ixp4xx/nslu2-leds.c |  223 ++++++++++++++++++++++++++++++++++++++
- 3 files changed, 232 insertions(+), 3 deletions(-)
-
---- linux-2.6.15/arch/arm/Kconfig	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.15/arch/arm/Kconfig	1970-01-01 00:00:00.000000000 +0000
-@@ -418,7 +418,8 @@ config LEDS
- 		   ARCH_EBSA285 || ARCH_IMX || ARCH_INTEGRATOR || \
- 		   ARCH_LUBBOCK || MACH_MAINSTONE || ARCH_NETWINDER || \
- 		   ARCH_OMAP || ARCH_P720T || ARCH_PXA_IDP || \
--		   ARCH_SA1100 || ARCH_SHARK || ARCH_VERSATILE
-+		   ARCH_SA1100 || ARCH_SHARK || ARCH_VERSATILE || \
-+		   MACH_NSLU2
- 	help
- 	  If you say Y here, the LEDs on your machine will be used
- 	  to provide useful information about your current system status.
-@@ -432,7 +433,7 @@ config LEDS
- 
- config LEDS_TIMER
- 	bool "Timer LED" if (!ARCH_CDB89712 && !ARCH_OMAP) || \
--			    MACH_OMAP_H2 || MACH_OMAP_PERSEUS2
-+			    MACH_OMAP_H2 || MACH_OMAP_PERSEUS2 || MACH_NSLU2
- 	depends on LEDS
- 	default y if ARCH_EBSA110
- 	help
-@@ -448,7 +449,8 @@ config LEDS_TIMER
- 
- config LEDS_CPU
- 	bool "CPU usage LED" if (!ARCH_CDB89712 && !ARCH_EBSA110 && \
--			!ARCH_OMAP) || MACH_OMAP_H2 || MACH_OMAP_PERSEUS2
-+			!ARCH_OMAP) || MACH_OMAP_H2 || MACH_OMAP_PERSEUS2 \
-+			|| MACH_NSLU2
- 	depends on LEDS
- 	help
- 	  If you say Y here, the red LED will be used to give a good real
---- linux-2.6.15/arch/arm/mach-ixp4xx/Makefile	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.15/arch/arm/mach-ixp4xx/Makefile	1970-01-01 00:00:00.000000000 +0000
-@@ -10,3 +10,7 @@ obj-$(CONFIG_ARCH_ADI_COYOTE)	+= coyote-
- obj-$(CONFIG_MACH_GTWX5715)	+= gtwx5715-pci.o gtwx5715-setup.o
- obj-$(CONFIG_MACH_NSLU2)	+= nslu2-pci.o nslu2-setup.o nslu2-power.o
- 
-+leds-$(CONFIG_MACH_NSLU2)	+= nslu2-leds.o
-+obj-$(CONFIG_LEDS)		+= $(leds-y)
-+
-+
---- linux-2.6.15/arch/arm/mach-ixp4xx/nslu2-leds.c	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.15/arch/arm/mach-ixp4xx/nslu2-leds.c	1970-01-01 00:00:00.000000000 +0000
-@@ -0,0 +1,223 @@
-+/*
-+ * arch/arm/mach-ixp4xx/nslu2-leds.c
-+ *
-+ * NSLU2 LEDs driver
-+ *
-+ * Copyright (C) 2005 Tower Technologies
-+ *
-+ * based on nslu2-io.c
-+ *  Copyright (C) 2004 Karen Spearel
-+ * and arch/arm/mach-footbridge/netwinder-leds.c
-+ *  Copyright (C) 1998-1999 Russell King
-+ *
-+ * Author: Alessandro Zummo <a.zummo@towertech.it>
-+ * Maintainers: http://www.nslu2-linux.org/
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/config.h>
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/spinlock.h>
-+#include <linux/notifier.h>
-+
-+#include <asm/hardware.h>
-+#include <asm/leds.h>
-+#include <asm/mach-types.h>
-+#include <asm/system.h>
-+
-+#define LED_STATE_ENABLED	0x01
-+#define LED_STATE_CLAIMED	0x02
-+#define LED_STATE_IDLE		0x04
-+
-+static unsigned char led_state;
-+static unsigned int hw_led_state;
-+
-+#ifdef CONFIG_LEDS_TIMER
-+static const unsigned long idle_seq[4] = {
-+	NSLU2_LED_GRN_BM, 0,
-+	NSLU2_LED_GRN_BM, 0,
-+};
-+
-+static const unsigned long busy_seq[4] = {
-+	NSLU2_LED_GRN_BM, 0,
-+	NSLU2_LED_GRN_BM | NSLU2_LED_RED_BM, 0,
-+};
-+#endif
-+
-+static unsigned char led_count = 0;
-+
-+static DEFINE_SPINLOCK(leds_lock);
-+extern spinlock_t gpio_lock;
-+
-+static void nslu2_leds_event(led_event_t evt)
-+{
-+	unsigned long flags;
-+
-+	spin_lock_irqsave(&leds_lock, flags);
-+
-+	switch (evt) {
-+	case led_start:
-+		/* Let's rock! Red led on, all others off. Remember
-+		 * that disk1/disk2 works inverted.
-+		 */
-+		led_state = LED_STATE_ENABLED;
-+		hw_led_state = NSLU2_LED_DISK1_BM | NSLU2_LED_DISK2_BM
-+				| NSLU2_LED_RED_BM;
-+		break;
-+
-+	case led_stop:
-+		led_state &= ~LED_STATE_ENABLED;
-+		break;
-+
-+	case led_claim:
-+		/* The user claimed the interface, red and green off */
-+		led_state |= LED_STATE_CLAIMED;
-+		hw_led_state &= ~(NSLU2_LED_RED_BM | NSLU2_LED_GRN_BM);
-+		break;
-+
-+	case led_release:
-+		/* The user released the interface, preserve the last
-+		 * status of the leds, except red/green.
-+		 */
-+		led_state &= ~LED_STATE_CLAIMED;
-+		hw_led_state = *IXP4XX_GPIO_GPOUTR & 0x0000000C;
-+		break;
-+
-+#ifdef CONFIG_LEDS_TIMER
-+	case led_timer:
-+		/* Pulse green led */
-+		if (!(led_state & LED_STATE_CLAIMED))
-+		{
-+			/* clear red and green bits */
-+			hw_led_state &= ~(NSLU2_LED_RED_BM | NSLU2_LED_GRN_BM);
-+
-+			/* copy the right sequence in */
-+			if (led_state & LED_STATE_IDLE)
-+				hw_led_state |= idle_seq[led_count % 4];
-+			else
-+				hw_led_state |= busy_seq[led_count % 4];
-+
-+			led_count++;
-+		}
-+		break;
-+#endif
-+
-+#ifdef CONFIG_LEDS_CPU
-+	case led_idle_start:
-+		led_state |= LED_STATE_IDLE;
-+#ifndef CONFIG_LEDS_TIMER
-+		/* green on, red off */
-+		hw_led_state |= NSLU2_LED_GRN_BM;
-+		hw_led_state &= ~NSLU2_LED_RED_BM;
-+#endif
-+		break;
-+
-+	case led_idle_end:
-+		led_state &= ~LED_STATE_IDLE;
-+#ifndef CONFIG_LEDS_TIMER
-+		/* green on, red on -> amber on */
-+		hw_led_state |= NSLU2_LED_GRN_BM | NSLU2_LED_RED_BM;
-+#endif
-+		break;
-+#endif /* CONFIG_LEDS_CPU */
-+
-+	case led_halted:
-+		if (!(led_state & LED_STATE_CLAIMED))
-+			hw_led_state |= NSLU2_LED_RED_BM;
-+		break;
-+
-+	/* leds */
-+
-+	case led_green_on:
-+		if (led_state & LED_STATE_CLAIMED)
-+			hw_led_state |= NSLU2_LED_GRN_BM;
-+		break;
-+
-+	case led_green_off:
-+		if (led_state & LED_STATE_CLAIMED)
-+			hw_led_state &= ~NSLU2_LED_GRN_BM;
-+		break;
-+
-+	case led_amber_on:
-+		if (led_state & LED_STATE_CLAIMED)
-+			hw_led_state |= (NSLU2_LED_RED_BM | NSLU2_LED_GRN_BM);
-+		break;
-+
-+	case led_amber_off:
-+		if (led_state & LED_STATE_CLAIMED)
-+			hw_led_state &= ~(NSLU2_LED_RED_BM | NSLU2_LED_GRN_BM);
-+		break;
-+
-+	case led_red_on:
-+		if (led_state & LED_STATE_CLAIMED)
-+			hw_led_state |= NSLU2_LED_RED_BM;
-+		break;
-+
-+	case led_red_off:
-+		if (led_state & LED_STATE_CLAIMED)
-+			hw_led_state &= ~NSLU2_LED_RED_BM;
-+		break;
-+
-+	default:
-+		break;
-+	}
-+
-+	spin_unlock_irqrestore(&leds_lock, flags);
-+
-+	if  (led_state & LED_STATE_ENABLED) {
-+		spin_lock_irqsave(&gpio_lock, flags);
-+		*IXP4XX_GPIO_GPOUTR = (*IXP4XX_GPIO_GPOUTR & 0xFFFFFFF0) | hw_led_state;
-+		spin_unlock_irqrestore(&gpio_lock, flags);
-+	}
-+}
-+
-+static int nslu2_leds_panic_event(struct notifier_block *this, unsigned long event,
-+	void *ptr)
-+{
-+#ifdef CONFIG_LEDS_TIMER
-+	leds_event(led_claim);
-+#endif
-+	leds_event(led_green_off);
-+	leds_event(led_red_on);
-+
-+	return NOTIFY_DONE;
-+}
-+
-+static struct notifier_block nslu2_leds_panic_block = {
-+	.notifier_call	= nslu2_leds_panic_event,
-+};
-+
-+static int __init nslu2_leds_init(void)
-+{
-+	if (!(machine_is_nslu2()))
-+		return 0;
-+
-+	printk(KERN_INFO "NSLU2: leds\n");
-+
-+	/* register panic notifier */
-+	notifier_chain_register(&panic_notifier_list, &nslu2_leds_panic_block);
-+
-+	/* enable gpio 0-3 */
-+	gpio_line_config(NSLU2_LED_GRN, IXP4XX_GPIO_OUT);
-+	gpio_line_config(NSLU2_LED_RED, IXP4XX_GPIO_OUT);
-+	gpio_line_config(NSLU2_LED_DISK1, IXP4XX_GPIO_OUT);
-+	gpio_line_config(NSLU2_LED_DISK2, IXP4XX_GPIO_OUT);
-+
-+	leds_event = nslu2_leds_event;
-+
-+	/* this will also initialize the leds to the
-+	 * default state.
-+	 */
-+
-+	leds_event(led_start);
-+
-+	return 0;
-+}
-+
-+module_init(nslu2_leds_init);
diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6.15/80-nslu2-io.patch b/packages/obsolete/nslu2/nslu2-kernel/2.6.15/80-nslu2-io.patch
deleted file mode 100644
index 26031f6f00..0000000000
--- a/packages/obsolete/nslu2/nslu2-kernel/2.6.15/80-nslu2-io.patch
+++ /dev/null
@@ -1,560 +0,0 @@
---- linux-2.6.15/arch/arm/mach-ixp4xx/Makefile	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.15/arch/arm/mach-ixp4xx/Makefile	1970-01-01 00:00:00.000000000 +0000
-@@ -8,5 +8,5 @@ obj-$(CONFIG_ARCH_IXDP4XX)	+= ixdp425-pc
- obj-$(CONFIG_MACH_IXDPG425)	+= ixdpg425-pci.o coyote-setup.o
- obj-$(CONFIG_ARCH_ADI_COYOTE)	+= coyote-pci.o coyote-setup.o
- obj-$(CONFIG_MACH_GTWX5715)	+= gtwx5715-pci.o gtwx5715-setup.o
--obj-$(CONFIG_MACH_NSLU2)	+= nslu2-pci.o nslu2-setup.o nslu2-power.o
-+obj-$(CONFIG_MACH_NSLU2)	+= nslu2-pci.o nslu2-setup.o nslu2-power.o nslu2-io.o
- 
---- linux-2.6.15/arch/arm/mach-ixp4xx/nslu2-io.c	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.15/arch/arm/mach-ixp4xx/nslu2-io.c	1970-01-01 00:00:00.000000000 +0000
-@@ -0,0 +1,548 @@
-+//=============================================================================
-+//
-+// n2-io.c version 0.1.7
-+// Author: Karen Spearel <kas11 at tampabay.rr.com>
-+// please report problems/bugs directly to the address above
-+//
-+// Boilerplate to be added "real soon now"...it is and has always been GPL'ed per
-+// MODULE_LICENSE but is offered without warrantee of any sort..use at your own risk
-+//
-+// NOTE: THIS IS INCOMPLETE.  INCLUDED ONLY TO KEEP FROM BREAKING THE BUILD,
-+// IT BEEPS AND SENDS A MESSAGE TO /proc/poweroff.  EVENTUALLY IT
-+// WILL TALK TO THE n2_pbd DAEMON.  EVENTUALLY THE LED DRIVER
-+// WILL TALK TO SOME USERLAND APP BUT ***NOT*** SET_LEDS.
-+// 
-+//=============================================================================
-+//	GPIO		Function	State
-+//	0		Red LED		Status		
-+//	1		Green LED	Ready = 1
-+//	2		Disk 2 LED	On = 0
-+//	3		Disk 1 LED	On = 0
-+//	4		Buzzer
-+//	5		Power Button	Pressed = 1
-+//	8		Power Down	Output = 1 powers down NSLU2
-+//	12		Reset		Pressed = 0
-+
-+#include <linux/config.h>
-+#include <linux/version.h>
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/proc_fs.h>
-+#include <linux/device.h>
-+#include <linux/reboot.h>
-+
-+#include <asm/uaccess.h>
-+#include <asm-arm/irq.h>
-+#include <asm-arm/delay.h>
-+
-+/* Set this to 1 to output lots of debug messages. */
-+#define NSLU2_IO_DEBUG 0
-+
-+#if NSLU2_IO_DEBUG
-+#define nslu2_io_debug(args) printk args
-+#else
-+#define nslu2_io_debug(args) ((void)0)
-+#endif
-+
-+#define VERSION			"0.1.7"
-+
-+#define	NSLU2BZ_MAJOR		62		//buzzer
-+#define NSLU2LM_MAJOR		126
-+
-+
-+#define NSLU2_BEEP_DUR_LONG	2000
-+#define NSLU2_BEEP_DUR_MED	400
-+#define NSLU2_BEEP_DUR_SHORT	100
-+#define NSLU2_BEEP_PITCH_HIGH	250
-+#define NSLU2_BEEP_PITCH_MED	500
-+#define NSLU2_BEEP_PITCH_LOW	1000
-+#define NSLU2_LONG_DELAY	30000
-+
-+#define NSLU2_BZ_BM		(1L << NSLU2_GPIO_BUZZ)
-+
-+// ioctls -- 'M" is used for sound cards...we don't got one so it seems safe
-+
-+#define NSLU2BZ_BEEP_STOP		_IO('M',0)       //stop multi-beep at end of audible
-+#define NSLU2BZ_BEEP		_IO('M',1)       //one beep at current defaults
-+#define NSLU2BZ_BEEPS		_IOW('M',3,long) //param beeps at current defaults
-+#define NSLU2BZ_TONESET		_IOW('M',4,long) //set tone: range is high=250 to low=2000
-+#define NSLU2BZ_ONTIME		_IOW('M',5,long) //ontime for multi-beeps in jiffies
-+#define	NSLU2BZ_SILENTTIME		_IOW('M',6,long) //offtime for multi-beeps in jiffies
-+#define NSLU2BZ_REPEATCNT		_IOW('M',7,long) //number of repeats for multi-beeps 0 = forever
-+#define NSLU2BZ_COMBINED		_IOW('M',8,long) //combine all params in a long
-+
-+#define NSLU2LM_OFF		_IOW('M',32,long)
-+#define NSLU2LM_ON			_IOW('M',33,long)
-+#define NSLU2LM_BLINK		_IOW('M',34,long)
-+#define NSLU2LM_ALT		_IOW('M',35,long)
-+#define NSLU2LM_ALL_ON		_IO('M',36)
-+#define NSLU2LM_ALL_OFF		_IO('M',37)
-+
-+#define PHYS_LEDS		4
-+#define BLINK_DELAY		25
-+
-+//  OR Masks to turn these LEDs ON
-+
-+#define	RS_RED_ON	0x00000001	//0b0000 0000 0000 0010
-+#define	RS_GRN_ON	0x00000002	//0b0000 0000 0000 0001
-+#define RS_YEL_ON	0x00000003	//0b0000 0000 0000 0011
-+
-+// AND Masks to turn these LEDs OFF
-+
-+#define	RS_RED_OFF	0xfffffffe	//0b1111 1111 1111 1101
-+#define	RS_GRN_OFF	0xfffffffd	//0b1111 1111 1111 1110
-+#define RS_YEL_OFF	0xfffffffc	//0b1111 1111 1111 1100
-+
-+// AND Masks to turn these LEDs ON
-+
-+#define DISK1_ON	0xfffffff7	//0b1111 1111 1111 0111
-+#define	DISK2_ON	0xfffffffb	//0b1111 1111 1111 1011
-+
-+// Or Masks to turn these LEDs OFF
-+
-+#define DISK1_OFF	0x00000008	//0b0000 0000 0000 1000
-+#define	DISK2_OFF	0x00000004	//0b0000 0000 0000 0100	
-+
-+// EOR masks for toggling LEDs on/off
-+
-+#define RS_RG_ALT	0x00000003	//eor mask to toggle rs rg bits
-+#define RS_GRN_TGL	0x00000002
-+#define RS_RED_TGL	0x00000001
-+#define DISK1_TGL	0x00000008
-+#define DISK2_TGL	0x00000004
-+
-+// The LED names for switches
-+
-+#define LED_RS_RED	0
-+#define LED_RS_GRN	1
-+#define	LED_DISK1	2
-+#define LED_DISK2	3
-+#define LED_ALL		4
-+
-+static unsigned long ontime = 50;
-+static unsigned long offtime = 450;
-+static unsigned long bz_repeatcnt = 10;
-+static unsigned long tone = 1000;
-+
-+static struct timer_list n2lm_rsg_timer;	//rs green 
-+static struct timer_list n2lm_rsr_timer;	//rs red
-+static struct timer_list n2lm_d1_timer;		//drive 1
-+static struct timer_list n2lm_d2_timer;		//drive 2
-+static struct timer_list n2bz_timer;		//beeper
-+
-+// sysfs class
-+static struct class *n2lm_class;
-+
-+//==================================================================================================
-+//
-+// Blinking is handled entirely by the 4 timer handlers.  On timeout, the bit in the
-+// GPIO output register is xor'd with a mask corresponding to the selected led which simply
-+// flips that bit.  No record of what any of the other leds is doing is needed.
-+//
-+//==================================================================================================
-+// this blinks rs green or green/yellow if rs red is on
-+#ifndef CONFIG_LEDS
-+static void n2lm_rsg_handler(unsigned long data)
-+{
-+	*IXP4XX_GPIO_GPOUTR ^= RS_GRN_TGL;			//flip the led
-+	n2lm_rsg_timer.expires = jiffies + BLINK_DELAY;		//next timeout
-+	add_timer(&n2lm_rsg_timer);				//reinit timer
-+	return;
-+}
-+
-+// this blinks or alternates rs red green... inited wit green on/red off
-+static void n2lm_rsr_handler(unsigned long data)
-+{
-+	*IXP4XX_GPIO_GPOUTR ^= n2lm_rsr_timer.data;
-+	n2lm_rsr_timer.expires = jiffies + BLINK_DELAY;
-+	add_timer(&n2lm_rsr_timer);
-+	return;	
-+}
-+// blinks disk 1
-+static void n2lm_d1_handler(unsigned long data)
-+{
-+	*IXP4XX_GPIO_GPOUTR ^= DISK1_TGL;
-+	n2lm_d1_timer.expires = jiffies + BLINK_DELAY;
-+	add_timer(&n2lm_d1_timer);
-+	return;
-+}
-+// blinks disk 2
-+static void n2lm_d2_handler(unsigned long data)
-+{
-+	*IXP4XX_GPIO_GPOUTR ^= DISK2_TGL;
-+	n2lm_d2_timer.expires = jiffies + BLINK_DELAY;
-+	add_timer(&n2lm_d2_timer);
-+	return;
-+}
-+
-+//==================================================================================================
-+
-+static void n2lm_timer_start(unsigned long led)
-+{
-+
-+	nslu2_io_debug((KERN_DEBUG "timer: %ld\n",led));
-+
-+	switch(led) {
-+		case LED_RS_RED:
-+			n2lm_rsr_timer.expires = jiffies + BLINK_DELAY;
-+			add_timer(&n2lm_rsr_timer);
-+			break;
-+
-+		case LED_RS_GRN:
-+			n2lm_rsg_timer.expires = jiffies + BLINK_DELAY;
-+			add_timer(&n2lm_rsg_timer);
-+			break;
-+
-+		case LED_DISK1:
-+			n2lm_d1_timer.expires = jiffies + BLINK_DELAY;
-+			add_timer(&n2lm_d1_timer);
-+ 			break;
-+
-+		case LED_DISK2:
-+			n2lm_d2_timer.expires = jiffies + BLINK_DELAY; 
-+			add_timer(&n2lm_d2_timer);
-+			break;
-+
-+		default:
-+			break;
-+	}
-+	return;
-+}
-+
-+//==================================================================================================
-+
-+static void n2lm_timer_stop(unsigned long led)
-+{
-+	switch (led) {
-+		case LED_RS_RED:
-+			del_timer(&n2lm_rsr_timer);
-+			break;
-+		case LED_RS_GRN:
-+			del_timer(&n2lm_rsg_timer);
-+			break;
-+		case LED_DISK1:
-+			del_timer(&n2lm_d1_timer);
-+ 			break;
-+		case LED_DISK2: 
-+			del_timer(&n2lm_d2_timer);
-+			break;
-+		default:
-+			break;
-+	}
-+	return;
-+}
-+
-+//--------------------------------------------------------------------------------------------------
-+
-+static void n2lm_timer_stop_all(void)
-+{
-+	del_timer(&n2lm_rsg_timer);
-+	del_timer(&n2lm_rsr_timer);
-+	del_timer(&n2lm_d1_timer); 
-+	del_timer(&n2lm_d2_timer);
-+	return;
-+}
-+//--------------------------------------------------------------------------------------------------
-+
-+static void n2lm_ledon(unsigned long led)
-+{
-+
-+	nslu2_io_debug((KERN_DEBUG "ledon: %ld\n", led));
-+
-+	switch (led) {
-+		case LED_RS_RED:	
-+			*IXP4XX_GPIO_GPOUTR |= RS_RED_ON;	//1
-+			return;
-+		case LED_RS_GRN:
-+			*IXP4XX_GPIO_GPOUTR |= RS_GRN_ON;	//2
-+			return;
-+		case LED_DISK1:
-+			*IXP4XX_GPIO_GPOUTR &= DISK1_ON;	//0xfffffff7
-+			return;
-+		case LED_DISK2:	
-+			*IXP4XX_GPIO_GPOUTR &= DISK2_ON;	//0xfffffffb
-+			return;
-+		case LED_ALL:					//all green
-+			*IXP4XX_GPIO_GPOUTR |= RS_GRN_ON;
-+			*IXP4XX_GPIO_GPOUTR &= (DISK1_ON & DISK2_ON);
-+			return;	
-+	}
-+}
-+
-+//--------------------------------------------------------------------------------------------------
-+
-+static void n2lm_ledoff(unsigned long led)
-+{
-+
-+	switch (led) {
-+		case LED_RS_RED:	
-+			*IXP4XX_GPIO_GPOUTR &= RS_RED_OFF;	//0xffffffffe
-+			return;
-+		case LED_RS_GRN:
-+			*IXP4XX_GPIO_GPOUTR &= RS_GRN_OFF;	//0xfffffffd
-+			return;
-+		case LED_DISK1:
-+			*IXP4XX_GPIO_GPOUTR |= DISK1_OFF;	//0x00000008
-+			return;
-+		case LED_DISK2:	
-+			*IXP4XX_GPIO_GPOUTR |= DISK2_OFF;	//0x00000004
-+			return;
-+		case LED_ALL:
-+			*IXP4XX_GPIO_GPOUTR &= (RS_GRN_OFF & RS_RED_OFF);
-+			*IXP4XX_GPIO_GPOUTR |= (DISK1_OFF | DISK2_OFF);
-+	}
-+}
-+
-+//==================================================================================================
-+
-+static int n2lm_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long led)
-+{
-+
-+	nslu2_io_debug((KERN_DEBUG "cmd=%d, led=%ld\n", cmd, led));
-+	
-+	if (led < 0 || led >= PHYS_LEDS)
-+		return -EINVAL;
-+
-+	switch (cmd ) {
-+		case NSLU2LM_ON:
-+			n2lm_timer_stop(led);
-+			n2lm_ledon(led);
-+			break;
-+			
-+		case NSLU2LM_OFF:
-+			n2lm_timer_stop(led);
-+			n2lm_ledoff(led);
-+			break;
-+			
-+		case NSLU2LM_BLINK:
-+			n2lm_ledon(led);
-+			if (led == LED_RS_RED)
-+				n2lm_rsr_timer.data = RS_RED_TGL;
-+			n2lm_timer_start(led);
-+			break;
-+
-+		case NSLU2LM_ALT:
-+			if (led == LED_RS_RED)
-+			{
-+				n2lm_ledon(LED_RS_GRN);
-+				n2lm_ledoff(LED_RS_RED);
-+				n2lm_rsr_timer.data = RS_RG_ALT;
-+				n2lm_timer_start(LED_RS_RED);
-+				break;
-+			} else
-+				return -EINVAL;
-+		
-+		case NSLU2LM_ALL_ON:
-+			n2lm_timer_stop_all();
-+			n2lm_ledon(LED_ALL);
-+			break;
-+		
-+		case NSLU2LM_ALL_OFF:
-+			n2lm_timer_stop_all();
-+			n2lm_ledoff(LED_ALL);
-+			break;
-+		
-+		default:
-+			return -EINVAL;
-+	}
-+
-+	return 0;
-+}
-+
-+static struct file_operations n2lm_fops = {
-+	.owner		= THIS_MODULE,
-+	.ioctl		= n2lm_ioctl,
-+};
-+#endif
-+//==================================================================================================
-+// We can't do anything fancy here since the system tick rate is far below that required to
-+// generate a desirable tone.  Therefore we haven't much choice but to use a busy loop until
-+// I get up to speed on the timers.  The saving grace is that for the normal uses, nothing 
-+// important should be haprepening. 
-+//==================================================================================================
-+
-+static void n2_buzz(int tone_delay, int duration)
-+{
-+	int i;
-+
-+	*IXP4XX_GPIO_GPOER &= ~NSLU2_BZ_BM;
-+		
-+	for (i = 1; i < duration; i++) {
-+		*IXP4XX_GPIO_GPOUTR &= ~NSLU2_BZ_BM;
-+		udelay(tone_delay);
-+		*IXP4XX_GPIO_GPOUTR |= NSLU2_BZ_BM;
-+		udelay(tone_delay);
-+	}
-+	*IXP4XX_GPIO_GPOER |= NSLU2_BZ_BM;
-+
-+	return;
-+}
-+//=================================================================================================
-+
-+// this handles the buzzer duty cycle
-+static void n2bz_handler(unsigned long data)
-+{
-+	if (--bz_repeatcnt > 0) {			//if just one beep left to do
-+		n2bz_timer.expires = jiffies + ontime + offtime;	//next timeout
-+		add_timer(&n2bz_timer);					//reinit timer
-+	}
-+	n2_buzz(tone/2, ontime);
-+	nslu2_io_debug((KERN_DEBUG "Count = %d\tOntime = %d\n", bz_repeatcnt, ontime));
-+	return;
-+}
-+
-+//==================================================================================================
-+
-+static int n2bz_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long param)
-+{
-+	switch (cmd) {
-+		case NSLU2BZ_BEEP:
-+			n2_buzz(tone/2, ontime);
-+			break;
-+	
-+		case NSLU2BZ_BEEP_STOP:
-+			del_timer(&n2bz_timer);
-+			break;
-+
-+		case NSLU2BZ_BEEPS:
-+			if (param == 0)
-+				bz_repeatcnt = 0xffffffff;
-+			else
-+				bz_repeatcnt = param;
-+			n2bz_handler(0);
-+			break;
-+	
-+		case NSLU2BZ_TONESET:
-+			if (param >= 250 && param <= 2000)
-+				tone = param;
-+			break;
-+
-+		case NSLU2BZ_ONTIME:
-+			if (param > 4 && param < 201)
-+				ontime = param;
-+			break;
-+
-+		case NSLU2BZ_SILENTTIME:
-+			if (param > ontime)			//enforce a reasonable duty cycle
-+				offtime = param;
-+			else
-+				offtime = ontime;
-+			break;
-+
-+		case NSLU2BZ_REPEATCNT:
-+			if (param == 0)
-+				bz_repeatcnt = 0xffffffff;
-+			else
-+				bz_repeatcnt = param;
-+			break;
-+
-+		case NSLU2BZ_COMBINED:
-+			bz_repeatcnt =  (param & 0xF0000000) >> 28;	//repeat 1 - 16
-+			ontime =        (param & 0x0FF00000) >> 20; 	//ontime 1 - 256 jiffies
-+			offtime =       (param & 0x000FFF00) >> 8;	//offtime 1 - 4095 jiffies
-+			tone =          (param & 0x000000FF) << 4;	//tone (1 - 255) * 16
-+			break;
-+
-+		default:
-+			break;
-+	}
-+	return 0;
-+}
-+
-+static struct file_operations n2bz_fops = {
-+	.owner		= THIS_MODULE,
-+	.ioctl		= n2bz_ioctl,
-+};
-+
-+static void n2iom_initarch(void)
-+{
-+#ifndef CONFIG_LEDS
-+	init_timer(&n2lm_rsg_timer);
-+	init_timer(&n2lm_rsr_timer);
-+	init_timer(&n2lm_d1_timer);
-+	init_timer(&n2lm_d2_timer);
-+
-+	n2lm_rsr_timer.function = n2lm_rsr_handler;
-+	n2lm_rsg_timer.function = n2lm_rsg_handler;
-+	n2lm_d2_timer.function = n2lm_d2_handler;
-+	n2lm_d1_timer.function = n2lm_d1_handler;
-+#endif
-+
-+	init_timer(&n2bz_timer);
-+	n2bz_timer.function = n2bz_handler;
-+
-+	n2lm_rsr_timer.data = n2lm_rsg_timer.data = n2lm_d1_timer.data = n2lm_d2_timer.data = n2bz_timer.data = 0;
-+
-+#ifndef CONFIG_LEDS
-+	*IXP4XX_GPIO_GPOER &= 0xfffffff0;	//enable gpio 0-3
-+	*IXP4XX_GPIO_GPOUTR |= 0x00000003;	//turn off the leds
-+	*IXP4XX_GPIO_GPOUTR &= 0xfffffffc;
-+	n2lm_ledon(LED_ALL);
-+	n2_buzz(NSLU2_BEEP_PITCH_MED, NSLU2_BEEP_DUR_SHORT);
-+	n2lm_ledoff(LED_ALL);
-+
-+	// Default the Ready/Status to Red during kernel boot, Turn Green at the end of sysvinit
-+	n2lm_ledon(LED_RS_RED);
-+#endif
-+
-+	return;
-+}
-+
-+//==================================================================================================
-+
-+static int __init n2iom_init(void)
-+{
-+	printk(KERN_INFO "NSLU2: i/o, %s\n", VERSION);
-+  	
-+	n2iom_initarch();
-+
-+	n2lm_class = class_create(THIS_MODULE, "nslu2");
-+
-+#ifndef CONFIG_LEDS
-+	if (register_chrdev(NSLU2LM_MAJOR, "n2_ledm", &n2lm_fops) < 0) {
-+		printk(KERN_DEBUG "Led Manager Major %d not available\n", NSLU2LM_MAJOR);
-+		return -EBUSY;
-+	}
-+	else {
-+		class_device_create(n2lm_class, NULL, MKDEV(NSLU2LM_MAJOR, 0), NULL, "leds");
-+	}
-+#endif
-+
-+	if (register_chrdev(NSLU2BZ_MAJOR, "n2_bzm", &n2bz_fops) < 0) {
-+		printk(KERN_DEBUG "Buzzer Major %d not available\n", NSLU2BZ_MAJOR);
-+		return -EBUSY;
-+	}
-+	else {
-+		class_device_create(n2lm_class, NULL, MKDEV(NSLU2BZ_MAJOR, 0), NULL, "buzzer");
-+	}
-+
-+	return 0;
-+}
-+
-+//==================================================================================================
-+
-+static void __exit n2iom_exit(void)
-+{
-+
-+#ifndef CONFIG_LEDS
-+	del_timer(&n2lm_rsg_timer);
-+	del_timer(&n2lm_rsr_timer);
-+	del_timer(&n2lm_d1_timer);
-+	del_timer(&n2lm_d2_timer);	
-+
-+	unregister_chrdev(NSLU2LM_MAJOR, "n2lm" );
-+	class_device_destroy(n2lm_class, MKDEV(NSLU2LM_MAJOR, 0));
-+#endif
-+
-+	unregister_chrdev(NSLU2BZ_MAJOR, "n2bz");
-+	class_device_destroy(n2lm_class, MKDEV(NSLU2BZ_MAJOR, 0));
-+
-+	class_destroy(n2lm_class);
-+}
-+
-+module_init(n2iom_init);
-+module_exit(n2iom_exit);
-+
-+MODULE_AUTHOR("Karen Spearel <kas11@tampabay.rr.com>");
-+MODULE_DESCRIPTION("NSLU2 I/O driver");
-+MODULE_LICENSE("GPL");
diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6.15/85-timer.patch b/packages/obsolete/nslu2/nslu2-kernel/2.6.15/85-timer.patch
deleted file mode 100644
index 3d4a03f616..0000000000
--- a/packages/obsolete/nslu2/nslu2-kernel/2.6.15/85-timer.patch
+++ /dev/null
@@ -1,285 +0,0 @@
---- linux-2.6.15/arch/arm/mach-ixp4xx/common.c	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.15/arch/arm/mach-ixp4xx/common.c	1970-01-01 00:00:00.000000000 +0000
-@@ -239,36 +239,165 @@ void __init ixp4xx_init_irq(void)
-  * IXP4xx timer tick
-  * We use OS timer1 on the CPU for the timer tick and the timestamp 
-  * counter as a source of real clock ticks to account for missed jiffies.
-+ *
-+ * 'CLOCK_TICK_RATE' is the nominal number of internal ticks per second,
-+ * this is significantly greater than the actual number on any ixp4xx
-+ * board.  Neither this nor 'LATCH' are required by this code because
-+ * the only requirement is to generate HZ timer_tick calls per second.
-  *************************************************************************/
-+#if TICK_NSEC * HZ != 1000000000
-+	/* This will cause the jiffies to drift unnecessarily. */
-+#	error CLOCK_TICK_RATE should be a multiple of HZ for this code
-+#endif
-+
-+/* These are the control registers for the interrupt handler, they must
-+ * only be read and written by the interrupt handler and by the init
-+ * method (which sets them to 0).
-+ */
-+static volatile u32 last_timer_time;
-+static volatile int accumulated_error;
-+
-+/* Most ixp4xx boards have 66.6666MHz crystals, so default to this, reset
-+ * this from the board level code if required.  The following variables
-+ * must be *written* only by set_board_tick_rate
-+ */
-+static u32 board_tick_rate;
-+static u32 board_tick_per_1000; /* board_tick_rate/1000 */
-+static u32 timer_count;
-+
-+/* The following symbol may be written to change the current tick rate,
-+ * it is read by the interrupt handler and used to reload the timer.
-+ * The 'real' value (the one in use) is 'board_tick_rate' above.
-+ * NOTE: this can be tweaked to match the actual crystal on a particular
-+ * machine.
-+ */
-+volatile u32 ixp4xx_board_tick_rate = 66666600;
-+EXPORT_SYMBOL(ixp4xx_board_tick_rate);
-+
-+/* The set API may run asynchronously in the presence of interrupts,
-+ * everything it does it is both atomic and complete (notice that it
-+ * doesn't change any of the 'volatile' values).  The mathematics in
-+ * here require the following values.  Changing the board tick rate
-+ * implies an unknown error in the current timestamp tick count.
-+ */
-+#if IXP4XX_OST_RELOAD_MASK != 3 || IXP4XX_OST_ENABLE != 1
-+#	error unexpected value for timer reload mask
-+#endif
-+static void set_board_tick_rate(u32 rate) {
-+	u32 reload;
-+
-+	/* Store the two effectively informational rate values, the
-+	 * error calculation is (rate - count*HZ) (above), and rate
-+	 * is changed first, this can cause a temporary error which
-+	 * will be corrected on the next interrupt.
-+	 */
-+	board_tick_rate = rate;
-+	board_tick_per_1000 = (rate+500)/1000;
-+
-+	/* Calculate the correct value to load into the timer countdown
-+	 * register, the low two bits must be b01 (to enable the timer).
-+	 * Select the top bits to be as close to the desired value as
-+	 * possible.
-+	 *
-+	 * First find the best value, regardless of the low two bits -
-+	 * this is the value used in the interrupt calculation even though
-+	 * it cannot necessarily be set into the register.
-+	 */
-+	timer_count = (rate + (HZ/2))/HZ;
-+
-+	/* Now the timer_ticks are being generated at this rate, calculate
-+	 * an appropriate value for the register.  This stores a 30 bit
-+	 * value which gives a period of 4*x+1, we want:
-+	 *
-+	 *   4*x+1 = board_tick_rate/HZ
-+	 *
-+	 * This needs to be rounded to the closest 4*HZ value:
-+	 * 
-+	 *   x = ((board_tick_rate-HZ) + (4*HZ)/2) / 4*HZ
-+	 *   x = (board_tick_rate+HZ) / (4*HZ);
-+	 */
-+	reload = (board_tick_rate + HZ) / HZ;
-+	reload = (reload & ~IXP4XX_OST_RELOAD_MASK) | IXP4XX_OST_ENABLE;
-+	*IXP4XX_OSRT1 = reload;
- 
--static unsigned volatile last_jiffy_time;
-+	/* If the clock is drifing, look in syslog: */
-+	printk(KERN_INFO "IXP4xx: FREQ=%d COUNT=%d\n", rate, reload);
-+}
- 
--#define CLOCK_TICKS_PER_USEC	((CLOCK_TICK_RATE + USEC_PER_SEC/2) / USEC_PER_SEC)
-+/* This returns the time in timer ticks since the 'last_timer_time'
-+ * recorded above.  Use this to avoid arithmetic errors because of
-+ * the overflow when the timer wraps.
-+ */
-+static inline u32 ixp4xx_timer_delta(void)
-+{
-+	return *IXP4XX_OSTS - last_timer_time;
-+}
- 
- /* IRQs are disabled before entering here from do_gettimeofday() */
- static unsigned long ixp4xx_gettimeoffset(void)
- {
--	u32 elapsed;
--
--	elapsed = *IXP4XX_OSTS - last_jiffy_time;
-+	/* Return the offset of the current time from the last time
-+	 * timer tick in microseconds.  This is only used for the
-+	 * gettimeofday call.
-+	 *
-+	 * The result of this API is at most about 20000 (for a 50Hz
-+	 * HZ - 20000 uS/tick), the input delta is at most about
-+	 * 1.3M - 21 bits.
-+	 */
-+	u32 delta = ixp4xx_timer_delta(); /* About 21 bits max */
-+	/* return delta * 1000000 / board_tick_rate; */
-+	return (delta * 1000 + board_tick_per_1000/2) / board_tick_per_1000;
-+}
- 
--	return elapsed / CLOCK_TICKS_PER_USEC;
-+/* This is the correct adjustment to the counter to compensate for an
-+ * error iff timer_count-1 <= exact_count <= timer_count+1
-+ */
-+static inline int adjustment(int error) {
-+	if (error >= HZ)
-+		return 1;
-+	else if (error <= -HZ)
-+		return -1;
-+	return 0;
- }
- 
- static irqreturn_t ixp4xx_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
- {
-+	u32 rate;
-+	u32 count;
-+	int error;
-+
- 	write_seqlock(&xtime_lock);
- 
- 	/* Clear Pending Interrupt by writing '1' to it */
- 	*IXP4XX_OSST = IXP4XX_OSST_TIMER_1_PEND;
- 
-+	/* If the board tick rate has been changed update the cached
-+	 * value.
-+	 */
-+	if (ixp4xx_board_tick_rate != board_tick_rate) {
-+		set_board_tick_rate(ixp4xx_board_tick_rate);
-+		accumulated_error = 0;
-+	}
-+
- 	/*
- 	 * Catch up with the real idea of time
-+	 *
-+	 * board_tick_rate: actual ixp4xx ticks/second, read-only
-+	 * accumulated_error: aggregate error/tick * HZ, read/write
-+	 * timer_count: best ixp4xx ticks per timer_tick, read-only
- 	 */
--	while ((*IXP4XX_OSTS - last_jiffy_time) > LATCH) {
-+	rate = board_tick_rate;
-+	error = accumulated_error;
-+	count = timer_count;
-+	do {
-+		u32 adjusted_count = count + adjustment(error);
-+		if (ixp4xx_timer_delta() < adjusted_count)
-+			break;
- 		timer_tick(regs);
--		last_jiffy_time += LATCH;
--	}
-+		last_timer_time += adjusted_count;
-+		error += rate - adjusted_count*HZ;
-+	} while (1);
-+	accumulated_error = error;
- 
- 	write_sequnlock(&xtime_lock);
- 
-@@ -281,17 +410,30 @@ static struct irqaction ixp4xx_timer_irq
- 	.handler	= ixp4xx_timer_interrupt,
- };
- 
-+u32 ixp4xx_get_board_tick_rate(void) {
-+	return board_tick_rate;
-+}
-+
-+EXPORT_SYMBOL(ixp4xx_get_board_tick_rate);
-+
-+void ixp4xx_set_board_tick_rate(u32 rate) {
-+	ixp4xx_board_tick_rate = rate;
-+}
-+
-+EXPORT_SYMBOL(ixp4xx_set_board_tick_rate);
-+
- static void __init ixp4xx_timer_init(void)
- {
- 	/* Clear Pending Interrupt by writing '1' to it */
- 	*IXP4XX_OSST = IXP4XX_OSST_TIMER_1_PEND;
- 
- 	/* Setup the Timer counter value */
--	*IXP4XX_OSRT1 = (LATCH & ~IXP4XX_OST_RELOAD_MASK) | IXP4XX_OST_ENABLE;
-+	set_board_tick_rate(ixp4xx_board_tick_rate);
- 
- 	/* Reset time-stamp counter */
- 	*IXP4XX_OSTS = 0;
--	last_jiffy_time = 0;
-+	last_timer_time = 0;
-+	accumulated_error = 0;
- 
- 	/* Connect the interrupt handler and enable the interrupt */
- 	setup_irq(IRQ_IXP4XX_TIMER1, &ixp4xx_timer_irq);
-@@ -337,4 +479,3 @@ void __init ixp4xx_sys_init(void)
- 				ARRAY_SIZE(ixp46x_devices));
- 	}
- }
--
---- linux-2.6.15/arch/arm/mach-ixp4xx/nslu2-setup.c	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.15/arch/arm/mach-ixp4xx/nslu2-setup.c	1970-01-01 00:00:00.000000000 +0000
-@@ -119,6 +119,11 @@ static void nslu2_power_off(void)
- 
- static void __init nslu2_init(void)
- {
-+	/* The NSLU2 has a 33MHz crystal on board - 1.01% different
-+	 * from the typical value.
-+	 */
-+	ixp4xx_set_board_tick_rate(66000000);
-+
- 	ixp4xx_sys_init();
- 
- 	pm_power_off = nslu2_power_off;
---- linux-2.6.15/drivers/input/misc/nslu2spkr.c	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.15/drivers/input/misc/nslu2spkr.c	1970-01-01 00:00:00.000000000 +0000
-@@ -51,7 +51,7 @@ static int nslu2_spkr_event(struct input
- 	}
- 
- 	if (value > 20 && value < 32767)
--		count = (NSLU2_FREQ / (value*4)) - 1;
-+		count = (ixp4xx_get_board_tick_rate() / (value*4)) - 1;
- 
- 	spin_lock_irqsave(&beep_lock, flags);
- 
---- linux-2.6.15/include/asm-arm/arch-ixp4xx/nslu2.h	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.15/include/asm-arm/arch-ixp4xx/nslu2.h	1970-01-01 00:00:00.000000000 +0000
-@@ -38,11 +38,6 @@
- #define NSLU2_PCI_INTD_PIN	8
- 
- 
--/* NSLU2 Timer */
--#define NSLU2_FREQ 66000000
--#define NSLU2_CLOCK_TICK_RATE (((NSLU2_FREQ / HZ & ~IXP4XX_OST_RELOAD_MASK) + 1) * HZ)
--#define NSLU2_CLOCK_TICKS_PER_USEC ((NSLU2_CLOCK_TICK_RATE + USEC_PER_SEC/2) / USEC_PER_SEC)
--
- /* GPIO */
- 
- #define NSLU2_GPIO0		0
---- linux-2.6.15/include/asm-arm/arch-ixp4xx/timex.h	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.15/include/asm-arm/arch-ixp4xx/timex.h	1970-01-01 00:00:00.000000000 +0000
-@@ -6,10 +6,23 @@
- #include <asm/hardware.h>
- 
- /*
-- * We use IXP425 General purpose timer for our timer needs, it runs at 
-- * 66.66... MHz. We do a convulted calculation of CLOCK_TICK_RATE b/c the
-- * timer register ignores the bottom 2 bits of the LATCH value.
-+ * In linux/timex.h 'LATCH' is defined as CLOCK_TICK_RATE/HZ and
-+ * is the number of internal counts per timer interrupt.  Thus
-+ * CLOCK_TICK_RATE is LATCH*HZ.
-+ *
-+ * The actual values of these numbers do not matter, because they
-+ * are only used to calculate ACTHZ (rate/latch as a 24.8 fixed
-+ * point number), so the value here gives a LATCH of 1 and pretty
-+ * much guarantees to flush out any off-by-one errors.
-+ *
-+ * ACTHZ is equal to HZ, because CLOCK_TICK_RATE is a multiple of
-+ * HZ, this is checked in the ixp4xx/common.c code.
-  */
--#define FREQ 66666666
--#define CLOCK_TICK_RATE (((FREQ / HZ & ~IXP4XX_OST_RELOAD_MASK) + 1) * HZ)
-+#define CLOCK_TICK_RATE HZ
- 
-+/* The following allow the exact board tick rate to be set and
-+ * discovered.  The value should be exactly twice the frequency
-+ * (in Hz) of the onboard crystal.
-+ */
-+extern u32 ixp4xx_get_board_tick_rate(void);
-+extern void ixp4xx_set_board_tick_rate(u32 new_rate);
diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6.15/defconfig b/packages/obsolete/nslu2/nslu2-kernel/2.6.15/defconfig
deleted file mode 100644
index 9f7bf76471..0000000000
--- a/packages/obsolete/nslu2/nslu2-kernel/2.6.15/defconfig
+++ /dev/null
@@ -1,1617 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15
-# Mon Nov 14 10:44:43 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_EMBEDDED=y
-# CONFIG_KALLSYMS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-# CONFIG_BASE_FULL is not set
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=1
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-CONFIG_IOSCHED_DEADLINE=y
-# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-CONFIG_DEFAULT_DEADLINE=y
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="deadline"
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_CAMELOT is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-CONFIG_ARCH_IXP4XX=y
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_AAEC2000 is not set
-CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
-
-#
-# Intel IXP4xx Implementation Options
-#
-
-#
-# IXP4xx Platforms
-#
-CONFIG_MACH_NSLU2=y
-# CONFIG_ARCH_AVILA is not set
-# CONFIG_ARCH_ADI_COYOTE is not set
-# CONFIG_ARCH_IXDP425 is not set
-# CONFIG_MACH_IXDPG425 is not set
-# CONFIG_MACH_IXDP465 is not set
-# CONFIG_ARCH_PRPMC1100 is not set
-# CONFIG_MACH_GTWX5715 is not set
-
-#
-# IXP4xx Options
-#
-CONFIG_IXP4XX_INDIRECT_PCI=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-CONFIG_CPU_BIG_ENDIAN=y
-CONFIG_XSCALE_PMU=y
-CONFIG_DMABOUNCE=y
-
-#
-# Bus support
-#
-CONFIG_ISA_DMA_API=y
-CONFIG_PCI=y
-# CONFIG_PCI_LEGACY_PROC is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-# CONFIG_NO_IDLE_HZ is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/mtdblock4 rw rootfstype=jffs2 mem=32M@0x00000000 init=/linuxrc rtc-x1205.hctosys=1 rtc-x1205.probe=0,0x6f noirqdebug console=ttyS0,115200n8"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=m
-CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-CONFIG_INET_IPCOMP=m
-CONFIG_INET_TUNNEL=m
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_IPV6_TUNNEL=m
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_BRIDGE_NETFILTER=y
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=m
-# CONFIG_IP_NF_CT_ACCT is not set
-# CONFIG_IP_NF_CONNTRACK_MARK is not set
-# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
-CONFIG_IP_NF_CT_PROTO_SCTP=m
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-# CONFIG_IP_NF_NETBIOS_NS is not set
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-# CONFIG_IP_NF_PPTP is not set
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_PHYSDEV=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-# CONFIG_IP_NF_MATCH_SCTP is not set
-# CONFIG_IP_NF_MATCH_DCCP is not set
-CONFIG_IP_NF_MATCH_COMMENT=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
-# CONFIG_IP_NF_MATCH_STRING is not set
-CONFIG_IP_NF_FILTER=m
-# CONFIG_IP_NF_TARGET_REJECT is not set
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-# CONFIG_IP_NF_TARGET_NFQUEUE is not set
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-# CONFIG_IP_NF_TARGET_TTL is not set
-# CONFIG_IP_NF_RAW is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-
-#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP6_NF_QUEUE is not set
-# CONFIG_IP6_NF_IPTABLES is not set
-
-#
-# Bridge: Netfilter Configuration
-#
-# CONFIG_BRIDGE_NF_EBTABLES is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-CONFIG_BRIDGE=m
-CONFIG_VLAN_8021Q=m
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
-CONFIG_IPX=m
-# CONFIG_IPX_INTERN is not set
-CONFIG_ATALK=m
-CONFIG_DEV_APPLETALK=y
-CONFIG_IPDDP=m
-CONFIG_IPDDP_ENCAP=y
-CONFIG_IPDDP_DECAP=y
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
-
-#
-# Network testing
-#
-CONFIG_NET_PKTGEN=m
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_SCO=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-# CONFIG_BT_HIDP is not set
-
-#
-# Bluetooth device drivers
-#
-CONFIG_BT_HCIUSB=m
-CONFIG_BT_HCIUSB_SCO=y
-# CONFIG_BT_HCIUART is not set
-CONFIG_BT_HCIBCM203X=m
-# CONFIG_BT_HCIBPA10X is not set
-# CONFIG_BT_HCIBFUSB is not set
-# CONFIG_BT_HCIVHCI is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-# CONFIG_MTD_CFI_NOSWAP is not set
-CONFIG_MTD_CFI_BE_BYTE_SWAP=y
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
-CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-CONFIG_MTD_IXP4XX=y
-# CONFIG_MTD_PCI is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=4
-CONFIG_BLK_DEV_RAM_SIZE=10240
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=m
-# CONFIG_BLK_DEV_SR_VENDOR is not set
-CONFIG_CHR_DEV_SG=m
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA24XX is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-CONFIG_MD_RAID10=m
-CONFIG_MD_RAID5=m
-CONFIG_MD_RAID6=m
-CONFIG_MD_MULTIPATH=m
-CONFIG_MD_FAULTY=m
-CONFIG_BLK_DEV_DM=m
-# CONFIG_DM_CRYPT is not set
-# CONFIG_DM_SNAPSHOT is not set
-# CONFIG_DM_MIRROR is not set
-# CONFIG_DM_ZERO is not set
-# CONFIG_DM_MULTIPATH is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-CONFIG_TUN=m
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MACLIST=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-CONFIG_NET_RADIO=y
-
-#
-# Obsolete Wireless cards support (pre-802.11)
-#
-# CONFIG_STRIP is not set
-
-#
-# Wireless 802.11b ISA/PCI cards support
-#
-# CONFIG_AIRO is not set
-# CONFIG_HERMES is not set
-# CONFIG_ATMEL is not set
-
-#
-# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
-#
-# CONFIG_PRISM54 is not set
-# CONFIG_HOSTAP is not set
-CONFIG_NET_WIRELESS=y
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
-CONFIG_NETCONSOLE=m
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_RX is not set
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-CONFIG_INPUT_EVDEV=m
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_NSLU2_BEEPER=m
-# CONFIG_INPUT_UINPUT is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=2
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=16
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_IXP4XX_WATCHDOG=y
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-
-#
-# I2C support
-#
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_IOP3XX is not set
-CONFIG_I2C_IXP4XX=y
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_SCx200_ACB is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-CONFIG_SENSORS_EEPROM=y
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_RTC_X1205_I2C is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# Hardware Monitoring support
-#
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia Capabilities Port drivers
-#
-
-#
-# Multimedia devices
-#
-CONFIG_VIDEO_DEV=m
-
-#
-# Video For Linux
-#
-
-#
-# Video Adapters
-#
-CONFIG_VIDEO_BT848=m
-# CONFIG_VIDEO_SAA6588 is not set
-CONFIG_VIDEO_CPIA=m
-CONFIG_VIDEO_CPIA_USB=m
-CONFIG_VIDEO_SAA5246A=m
-CONFIG_VIDEO_SAA5249=m
-CONFIG_TUNER_3036=m
-CONFIG_VIDEO_STRADIS=m
-CONFIG_VIDEO_ZORAN=m
-CONFIG_VIDEO_ZORAN_BUZ=m
-CONFIG_VIDEO_ZORAN_DC10=m
-CONFIG_VIDEO_ZORAN_DC30=m
-CONFIG_VIDEO_ZORAN_LML33=m
-CONFIG_VIDEO_ZORAN_LML33R10=m
-CONFIG_VIDEO_SAA7134=m
-# CONFIG_VIDEO_SAA7134_ALSA is not set
-CONFIG_VIDEO_MXB=m
-CONFIG_VIDEO_DPC=m
-CONFIG_VIDEO_HEXIUM_ORION=m
-CONFIG_VIDEO_HEXIUM_GEMINI=m
-CONFIG_VIDEO_CX88=m
-# CONFIG_VIDEO_EM28XX is not set
-CONFIG_VIDEO_OVCAMCHIP=m
-# CONFIG_VIDEO_AUDIO_DECODER is not set
-# CONFIG_VIDEO_DECODER is not set
-
-#
-# Radio Adapters
-#
-# CONFIG_RADIO_GEMTEK_PCI is not set
-# CONFIG_RADIO_MAXIRADIO is not set
-# CONFIG_RADIO_MAESTRO is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-CONFIG_VIDEO_SAA7146=m
-CONFIG_VIDEO_SAA7146_VV=m
-CONFIG_VIDEO_VIDEOBUF=m
-CONFIG_VIDEO_TUNER=m
-CONFIG_VIDEO_BUF=m
-CONFIG_VIDEO_BTCX=m
-CONFIG_VIDEO_IR=m
-CONFIG_VIDEO_TVEEPROM=m
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
-CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-CONFIG_SND_HWDEP=m
-CONFIG_SND_RAWMIDI=m
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# PCI devices
-#
-# CONFIG_SND_ALI5451 is not set
-# CONFIG_SND_ATIIXP is not set
-# CONFIG_SND_ATIIXP_MODEM is not set
-# CONFIG_SND_AU8810 is not set
-# CONFIG_SND_AU8820 is not set
-# CONFIG_SND_AU8830 is not set
-# CONFIG_SND_AZT3328 is not set
-# CONFIG_SND_BT87X is not set
-# CONFIG_SND_CS46XX is not set
-# CONFIG_SND_CS4281 is not set
-# CONFIG_SND_EMU10K1 is not set
-# CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_YMFPCI is not set
-# CONFIG_SND_AD1889 is not set
-# CONFIG_SND_ALS4000 is not set
-# CONFIG_SND_CMIPCI is not set
-# CONFIG_SND_ENS1370 is not set
-# CONFIG_SND_ENS1371 is not set
-# CONFIG_SND_ES1938 is not set
-# CONFIG_SND_ES1968 is not set
-# CONFIG_SND_MAESTRO3 is not set
-# CONFIG_SND_FM801 is not set
-# CONFIG_SND_ICE1712 is not set
-# CONFIG_SND_ICE1724 is not set
-# CONFIG_SND_INTEL8X0 is not set
-# CONFIG_SND_INTEL8X0M is not set
-# CONFIG_SND_SONICVIBES is not set
-# CONFIG_SND_VIA82XX is not set
-# CONFIG_SND_VIA82XX_MODEM is not set
-# CONFIG_SND_VX222 is not set
-# CONFIG_SND_HDA_INTEL is not set
-
-#
-# ALSA ARM devices
-#
-
-#
-# USB devices
-#
-CONFIG_SND_USB_AUDIO=m
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_SPLIT_ISO=y
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
-CONFIG_USB_ACM=m
-CONFIG_USB_PRINTER=m
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=m
-CONFIG_USB_HIDINPUT=y
-# CONFIG_HID_FF is not set
-CONFIG_USB_HIDDEV=y
-
-#
-# USB HID Boot Protocol drivers
-#
-CONFIG_USB_KBD=m
-# CONFIG_USB_MOUSE is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_MTOUCH is not set
-# CONFIG_USB_ITMTOUCH is not set
-# CONFIG_USB_EGALAX is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB Multimedia devices
-#
-# CONFIG_USB_DABUSB is not set
-# CONFIG_USB_VICAM is not set
-# CONFIG_USB_DSBR is not set
-# CONFIG_USB_IBMCAM is not set
-# CONFIG_USB_KONICAWC is not set
-# CONFIG_USB_OV511 is not set
-# CONFIG_USB_SE401 is not set
-# CONFIG_USB_SN9C102 is not set
-# CONFIG_USB_STV680 is not set
-# CONFIG_USB_W9968CF is not set
-CONFIG_USB_PWC=m
-
-#
-# USB Network Adapters
-#
-CONFIG_USB_CATC=m
-CONFIG_USB_KAWETH=m
-CONFIG_USB_PEGASUS=m
-CONFIG_USB_RTL8150=m
-CONFIG_USB_USBNET=m
-CONFIG_USB_NET_AX8817X=m
-CONFIG_USB_NET_CDCETHER=m
-# CONFIG_USB_NET_GL620A is not set
-CONFIG_USB_NET_NET1080=m
-# CONFIG_USB_NET_PLUSB is not set
-# CONFIG_USB_NET_RNDIS_HOST is not set
-# CONFIG_USB_NET_CDC_SUBSET is not set
-CONFIG_USB_NET_ZAURUS=m
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_USB_MON is not set
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-CONFIG_USB_SERIAL=m
-CONFIG_USB_SERIAL_GENERIC=y
-# CONFIG_USB_SERIAL_AIRPRIME is not set
-# CONFIG_USB_SERIAL_ANYDATA is not set
-CONFIG_USB_SERIAL_BELKIN=m
-CONFIG_USB_SERIAL_WHITEHEAT=m
-CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
-# CONFIG_USB_SERIAL_CP2101 is not set
-CONFIG_USB_SERIAL_CYPRESS_M8=m
-CONFIG_USB_SERIAL_EMPEG=m
-CONFIG_USB_SERIAL_FTDI_SIO=m
-CONFIG_USB_SERIAL_VISOR=m
-CONFIG_USB_SERIAL_IPAQ=m
-CONFIG_USB_SERIAL_IR=m
-CONFIG_USB_SERIAL_EDGEPORT=m
-CONFIG_USB_SERIAL_EDGEPORT_TI=m
-CONFIG_USB_SERIAL_GARMIN=m
-CONFIG_USB_SERIAL_IPW=m
-CONFIG_USB_SERIAL_KEYSPAN_PDA=m
-# CONFIG_USB_SERIAL_KEYSPAN is not set
-CONFIG_USB_SERIAL_KLSI=m
-CONFIG_USB_SERIAL_KOBIL_SCT=m
-CONFIG_USB_SERIAL_MCT_U232=m
-CONFIG_USB_SERIAL_PL2303=m
-# CONFIG_USB_SERIAL_HP4X is not set
-CONFIG_USB_SERIAL_SAFE=m
-# CONFIG_USB_SERIAL_SAFE_PADDED is not set
-CONFIG_USB_SERIAL_TI=m
-CONFIG_USB_SERIAL_CYBERJACK=m
-CONFIG_USB_SERIAL_XIRCOM=m
-CONFIG_USB_SERIAL_OMNINET=m
-CONFIG_USB_EZUSB=y
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_CLASS=y
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-
-#
-# RTC drivers
-#
-CONFIG_RTC_DRV_X1205=y
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=m
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=m
-CONFIG_EXT3_FS_XATTR=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-CONFIG_JBD=m
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=m
-CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-CONFIG_REISERFS_FS_XATTR=y
-CONFIG_REISERFS_FS_POSIX_ACL=y
-CONFIG_REISERFS_FS_SECURITY=y
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-CONFIG_AUTOFS4_FS=m
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_ZISOFS_FS=m
-CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="utf8"
-CONFIG_NTFS_FS=m
-# CONFIG_NTFS_DEBUG is not set
-CONFIG_NTFS_RW=y
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_JFFS2_NATIVE_ENDIAN is not set
-CONFIG_JFFS2_BIG_ENDIAN=y
-# CONFIG_JFFS2_LITTLE_ENDIAN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-CONFIG_NFS_V4=y
-CONFIG_NFS_DIRECTIO=y
-CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-CONFIG_SUNRPC_GSS=m
-CONFIG_RPCSEC_GSS_KRB5=m
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-CONFIG_CIFS_XATTR=y
-CONFIG_CIFS_POSIX=y
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="utf8"
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=m
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_DES=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_TEST=m
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6/.mtn2git_empty b/packages/obsolete/nslu2/nslu2-kernel/2.6/.mtn2git_empty
deleted file mode 100644
index e69de29bb2..0000000000
--- a/packages/obsolete/nslu2/nslu2-kernel/2.6/.mtn2git_empty
+++ /dev/null
diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6/40-scsi-idle.patch b/packages/obsolete/nslu2/nslu2-kernel/2.6/40-scsi-idle.patch
deleted file mode 100644
index e04996e2a8..0000000000
--- a/packages/obsolete/nslu2/nslu2-kernel/2.6/40-scsi-idle.patch
+++ /dev/null
@@ -1,44 +0,0 @@
-diff -ur linux-2.6.12.2/drivers/scsi/sd.c linux-2.6.12.2_scsi-idle/drivers/scsi/sd.c
---- linux-2.6.12.2/drivers/scsi/sd.c	2005-08-27 06:12:31.000000000 +0200
-+++ linux-2.6.12.2_scsi-idle/drivers/scsi/sd.c	2005-08-27 06:26:50.000000000 +0200
-@@ -266,6 +266,9 @@
- 			    "count=%d\n", disk->disk_name,
- 			 (unsigned long long)block, this_count));
- 
-+	/* Update idle-since time */
-+	sdp->idle = jiffies;
-+
- 	if (!sdp || !scsi_device_online(sdp) ||
-  	    block + rq->nr_sectors > get_capacity(disk)) {
- 		SCSI_LOG_HLQUEUE(2, printk("Finishing %ld sectors\n", 
-@@ -600,6 +603,8 @@
- 		case SCSI_IOCTL_GET_IDLUN:
- 		case SCSI_IOCTL_GET_BUS_NUMBER:
- 			return scsi_ioctl(sdp, cmd, p);
-+		case SCSI_IOCTL_IDLE:
-+			return (jiffies - sdp->idle) / HZ + 1;
- 		default:
- 			error = scsi_cmd_ioctl(filp, disk, cmd, p);
- 			if (error != -ENOTTY)
-diff -ur linux-2.6.12.2/include/scsi/scsi_device.h linux-2.6.12.2_scsi-idle/include/scsi/scsi_device.h
---- linux-2.6.12.2/include/scsi/scsi_device.h	2005-08-27 06:12:44.000000000 +0200
-+++ linux-2.6.12.2_scsi-idle/include/scsi/scsi_device.h	2005-08-27 06:27:09.000000000 +0200
-@@ -125,6 +125,7 @@
- 	atomic_t ioerr_cnt;
- 
- 	int timeout;
-+	unsigned long		idle;	/* scsi idle time in jiffers */
- 
- 	struct device		sdev_gendev;
- 	struct class_device	sdev_classdev;
-diff -ur linux-2.6.12.2/include/scsi/scsi_ioctl.h linux-2.6.12.2_scsi-idle/include/scsi/scsi_ioctl.h
---- linux-2.6.12.2/include/scsi/scsi_ioctl.h	2005-08-27 06:12:44.000000000 +0200
-+++ linux-2.6.12.2_scsi-idle/include/scsi/scsi_ioctl.h	2005-08-28 17:32:17.000000000 +0200
-@@ -7,6 +7,7 @@
- #define SCSI_IOCTL_SYNC 4			/* Request synchronous parameters */
- #define SCSI_IOCTL_START_UNIT 5
- #define SCSI_IOCTL_STOP_UNIT 6
-+#define SCSI_IOCTL_IDLE 4746			/* get idle time in jiffies */
- /* The door lock/unlock constants are compatible with Sun constants for
-    the cdrom */
- #define SCSI_IOCTL_DOORLOCK 0x5380		/* lock the eject mechanism */
diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6/91-maclist.patch b/packages/obsolete/nslu2/nslu2-kernel/2.6/91-maclist.patch
deleted file mode 100644
index 27af1ea639..0000000000
--- a/packages/obsolete/nslu2/nslu2-kernel/2.6/91-maclist.patch
+++ /dev/null
@@ -1,377 +0,0 @@
---- linux-2.6.15/include/net/maclist.h	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.15/include/net/maclist.h	1970-01-01 00:00:00.000000000 +0000
-@@ -0,0 +1,23 @@
-+#ifndef _MACLIST_H
-+#define _MACLIST_H 1
-+/*
-+ * Interfaces to the MAC repository
-+ */
-+/*
-+ * Add a single entry, returns 0 on success else an error
-+ * code.  Must *not* be called from an interrupt handler.
-+ */
-+extern int maclist_add(const u8 id_to_add[6]);
-+
-+/*
-+ * Return the current entry count (valid in any context).
-+ */
-+extern int maclist_count(void);
-+
-+/*
-+ * Return the ID from the n'th entry (valid in any context),
-+ * returns 0 on success, -EINVAL if 'n' is out of range.
-+ */
-+extern int maclist_read(u8 (*buffer_for_id)[6], int index_of_id_to_return);
-+
-+#endif /*_MACLIST_H*/
---- linux-2.6.15/drivers/net/maclist.c	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.15/drivers/net/maclist.c	1970-01-01 00:00:00.000000000 +0000
-@@ -0,0 +1,314 @@
-+/*
-+ * drivers/net/maclist.c
-+ *
-+ * a simple driver to remember ethernet MAC values
-+ *
-+ * Some Ethernet hardware implementations have no built-in
-+ * storage for allocated MAC values - an example is the Intel
-+ * IXP420 chip which has support for Ethernet but no defined
-+ * way of storing allocated MAC values.  With such hardware
-+ * different board level implementations store the allocated
-+ * MAC (or MACs) in different ways.  Rather than put board
-+ * level code into a specific Ethernet driver this driver
-+ * provides a generally accessible repository for the MACs
-+ * which can be written by board level code and read by the
-+ * driver.
-+ *
-+ * The implementation also allows user level programs to
-+ * access the MAC information in /proc/net/maclist.  This is
-+ * useful as it allows user space code to use the MAC if it
-+ * is not used by a built-in driver.
-+ *
-+ * Copyright (C) 2005 John Bowler
-+ * Author: John Bowler <jbowler@acm.org>
-+ * Maintainers: http://www.nslu2-linux.org/
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * version 2 as published by the Free Software Foundation.
-+ *
-+ * External interfaces:
-+ *  Interfaces to linux kernel (and modules)
-+ *   maclist_add:   add a single MAC
-+ *   maclist_count: total number of MACs stored
-+ *   maclist_read:  read a MAC 0..(maclist_count-1)
-+ */
-+#include <linux/module.h>
-+#include <linux/moduleparam.h>
-+#include <linux/etherdevice.h>
-+#include <linux/proc_fs.h>
-+#include <linux/errno.h>
-+
-+#include <net/maclist.h>
-+
-+#define MACLIST_NAME "maclist"
-+
-+MODULE_AUTHOR("John Bowler <jbowler@acm.org>");
-+MODULE_DESCRIPTION("MAC list repository");
-+MODULE_LICENSE("GPL");
-+
-+typedef struct maclist_entry {
-+	struct maclist_entry *next;  /* Linked list, first first */
-+	u8                    id[6]; /* 6 byte Ethernet MAC */
-+} maclist_entry_t;
-+
-+/* Access to this list is possible at any time - entries in
-+ * the list are never destroyed.  Modification of the list is
-+ * safe only from the init code (i.e. modification must be
-+ * single threaded), but read from an interrupt at the same
-+ * time is possible and safe.
-+ */
-+static maclist_entry_t *maclist_list = 0;
-+
-+/*
-+ * External interfaces.
-+ *
-+ * Add a single entry, returns 0 on success else an error
-+ * code.  Must be single threaded.
-+ */
-+int maclist_add(const u8 new_id[6]) {
-+	maclist_entry_t *new_entry, **tail;
-+
-+	if (new_id == 0 || !is_valid_ether_addr(new_id)) {
-+		printk(KERN_ERR MACLIST_NAME ": invalid ethernet address\n");
-+		return -EINVAL;
-+	}
-+	new_entry = kmalloc(sizeof *new_entry, GFP_KERNEL);
-+	if (new_entry == 0)
-+		return -ENOMEM;
-+	new_entry->next = 0;
-+	memcpy(new_entry->id, new_id, sizeof new_entry->id);
-+
-+	tail = &maclist_list;
-+	while (*tail != 0)
-+		tail = &(*tail)->next;
-+	*tail = new_entry;
-+	return 0;
-+}
-+EXPORT_SYMBOL(maclist_add);
-+
-+/*
-+ * Return the current entry count (valid in any context).
-+ */
-+int maclist_count(void) {
-+	maclist_entry_t *tail = maclist_list;
-+	int count = 0;
-+
-+	while (tail != 0) {
-+		tail = tail->next;
-+		++count;
-+	}
-+
-+	return count;
-+}
-+EXPORT_SYMBOL(maclist_count);
-+
-+/*
-+ * Return the ID from the n'th entry (valid in any context),
-+ * returns 0 on success, -EINVAL if 'n' is out of range.
-+ */
-+int maclist_read(u8 (*id)[6], int n) {
-+	maclist_entry_t *entry = maclist_list;
-+
-+	while (n > 0 && entry != 0) {
-+		--n;
-+		entry = entry->next;
-+	}
-+
-+	if (n == 0 && entry != 0) {
-+		memcpy(id, entry->id, sizeof *id);
-+		return 0;
-+	}
-+
-+	printk(KERN_ERR MACLIST_NAME ": id does not exist\n");
-+	return -EINVAL;
-+}
-+EXPORT_SYMBOL(maclist_read);
-+
-+/*
-+ * Parameter parsing.  The option string is a list of MAC
-+ * addresses, comma separated.  (The parsing really should
-+ * be somewhere central...)
-+ */
-+static int __init maclist_setup(char *param) {
-+	int bytes = 0, seen_a_digit = 0;
-+	u8 id[6];
-+
-+	memset(id, 0, sizeof id);
-+
-+	if (param) do {
-+		int digit = -1;
-+		switch (*param) {
-+		case '0': digit = 0; break;
-+		case '1': digit = 1; break;
-+		case '2': digit = 2; break;
-+		case '3': digit = 3; break;
-+		case '4': digit = 4; break;
-+		case '5': digit = 5; break;
-+		case '6': digit = 6; break;
-+		case '7': digit = 7; break;
-+		case '8': digit = 8; break;
-+		case '9': digit = 9; break;
-+		case 'a': case 'A': digit = 10; break;
-+		case 'b': case 'B': digit = 11; break;
-+		case 'c': case 'C': digit = 12; break;
-+		case 'd': case 'D': digit = 13; break;
-+		case 'e': case 'E': digit = 14; break;
-+		case 'f': case 'F': digit = 15; break;
-+		case ':':
-+			if (seen_a_digit)
-+				bytes = (bytes+1) & ~1;
-+			else
-+				bytes += 2; /* i.e. ff::ff is ff:00:ff */
-+			seen_a_digit = 0;
-+			break;
-+		case 0:
-+			if (bytes == 0) /* nothing new seen so far */
-+				return 0;
-+			/*fall through*/
-+		case ',': case ';':
-+			if (bytes > 0)
-+				bytes = 12; /* i.e. all trailing bytes 0 */
-+			break;
-+		default:
-+			printk(KERN_ERR MACLIST_NAME ": invalid character <%c[%d]>\n",
-+					*param, *param);
-+			return -EINVAL;
-+		}
-+
-+		if (digit >= 0) {
-+			id[bytes>>1] = (id[bytes>>1] << 4) + digit; break;
-+			++bytes;
-+			seen_a_digit = 1;
-+		}
-+
-+		if (bytes >= 12) {
-+			int rc = maclist_add(id);
-+			if (rc)
-+				return rc;
-+			bytes = 0;
-+			seen_a_digit = 0;
-+			memset(id, 0, sizeof id);
-+			if (*param == 0)
-+				return 0;
-+		}
-+		++param;
-+	} while (1);
-+
-+	return 0;
-+}
-+
-+/*
-+ * procfs support, if compiled in.
-+ */
-+#ifdef CONFIG_PROC_FS
-+/*
-+ * Character device read
-+ */
-+static int maclist_getchar(off_t n) {
-+	static char xdigit[16] = "0123456789abcdef";
-+	maclist_entry_t *head = maclist_list;
-+	int b;
-+
-+	do {
-+		if (head == 0)
-+			return -1;
-+		if (n < 18)
-+			break;
-+		head = head->next;
-+		n -= 18;
-+	} while (1);
-+
-+	if (n == 17)
-+		return '\n';
-+
-+	b = n/3;
-+	switch (n - b*3) {
-+	case 0: return xdigit[head->id[b] >> 4];
-+	case 1: return xdigit[head->id[b] & 0xf];
-+	default: return ':';
-+	}
-+}
-+
-+/*
-+ * The extensively undocumented proc_read_t callback is implemented here.
-+ * Go look in fs/proc/generic.c:
-+ *
-+ * Prototype:
-+ *    int f(char *buffer, char **start, off_t offset,
-+ *          int count, int *peof, void *dat)
-+ *
-+ * Assume that the buffer is "count" bytes in size.
-+ *
-+ * 2) Set *start = an address within the buffer.
-+ *    Put the data of the requested offset at *start.
-+ *    Return the number of bytes of data placed there.
-+ *    If this number is greater than zero and you
-+ *    didn't signal eof and the reader is prepared to
-+ *    take more data you will be called again with the
-+ *    requested offset advanced by the number of bytes
-+ *    absorbed.
-+ */
-+static int maclist_proc_read(char *buffer, char **start, off_t offset,
-+		int count, int *peof, void *dat) {
-+	int total;
-+
-+	*start = buffer;
-+	total = 0;
-+
-+	while (total < count) {
-+		int ch = maclist_getchar(offset++);
-+		if (ch == -1) {
-+			*peof = 1;
-+			break;
-+		}
-+		*buffer++ = ch;
-+		++total;
-+	}
-+
-+	return total;
-+}
-+#endif
-+
-+/*
-+ * Finally, the init/exit functions.
-+ */
-+static void __exit maclist_exit(void)
-+{
-+	maclist_entry_t *list;
-+
-+	remove_proc_entry(MACLIST_NAME, proc_net);
-+
-+	list = maclist_list;
-+	maclist_list = 0;
-+
-+	while (list != 0) {
-+		maclist_entry_t *head = list;
-+		list = head->next;
-+		kfree(head);
-+	}
-+}
-+
-+#ifdef MODULE
-+static char ids[256];
-+module_param_string(ids, ids, sizeof ids, 0);
-+MODULE_PARM_DESC(ids, "comma separated list of MAC ids\n");
-+#else
-+__setup("maclist_ids=", maclist_setup);
-+#endif
-+
-+static int __init maclist_init(void)
-+{
-+#	ifdef MODULE
-+		if (ids[0])
-+			maclist_setup(ids);
-+#	endif
-+
-+	/* Ignore failure, the module will still work. */
-+	(void)create_proc_read_entry(MACLIST_NAME, S_IRUGO, proc_net, maclist_proc_read, NULL);
-+
-+	return 0;
-+}
-+
-+module_init(maclist_init);
-+module_exit(maclist_exit);
---- linux-2.6.15/drivers/net/Makefile	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.15/drivers/net/Makefile	1970-01-01 00:00:00.000000000 +0000
-@@ -70,6 +70,7 @@ obj-$(CONFIG_RIONET) += rionet.o
- # end link order section
- #
- 
-+obj-$(CONFIG_MACLIST) += maclist.o
- obj-$(CONFIG_MII) += mii.o
- obj-$(CONFIG_PHYLIB) += phy/
- 
---- linux-2.6.15/drivers/net/Kconfig	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.15/drivers/net/Kconfig	1970-01-01 00:00:00.000000000 +0000
-@@ -166,6 +166,21 @@ config NET_ETHERNET
- 	  kernel: saying N will just cause the configurator to skip all
- 	  the questions about Ethernet network cards. If unsure, say N.
- 
-+config MACLIST
-+	tristate "Ethernet MAC repository"
-+	depends on NET_ETHERNET
-+	help
-+	  Some ethernet controllers have no built-in way of obtaining an
-+	  appropriate Ethernet MAC address.  Such controllers have to be
-+	  initialised in a board-specific way, depending on how the allocated
-+	  MAC is stored.  The MAC repository provides a set of APIs and a
-+	  proc entry (/proc/net/maclist) to store MAC values from the board
-+	  so that such drivers can obtain a MAC address without board-specific
-+	  code.  You do not need to enable this device - it will be selected
-+	  automatically by any device which requires it.  It is only useful
-+	  to enable it manually when building a device driver independently
-+	  of the kernel build.
-+
- config MII
- 	tristate "Generic Media Independent Interface device support"
- 	depends on NET_ETHERNET
diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6/92-nslu2-maclist.patch b/packages/obsolete/nslu2/nslu2-kernel/2.6/92-nslu2-maclist.patch
deleted file mode 100644
index c8b8a9bede..0000000000
--- a/packages/obsolete/nslu2/nslu2-kernel/2.6/92-nslu2-maclist.patch
+++ /dev/null
@@ -1,80 +0,0 @@
---- linux-2.6.15/arch/arm/mach-ixp4xx/Kconfig	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.15/arch/arm/mach-ixp4xx/Kconfig	1970-01-01 00:00:00.000000000 +0000
-@@ -11,8 +11,8 @@ comment "IXP4xx Platforms"
- # This entry is placed on top because otherwise it would have
- # been shown as a submenu.
- config MACH_NSLU2
--	bool
--	prompt "NSLU2" if !(MACH_IXDP465 || MACH_IXDPG425 || ARCH_IXDP425 || ARCH_ADI_COYOTE || ARCH_AVILA || ARCH_IXCDP1100 || ARCH_PRPMC1100 || MACH_GTWX5715)
-+	bool "NSLU2"
-+	select MACLIST
- 	help
- 	  Say 'Y' here if you want your kernel to support Linksys's
- 	  NSLU2 NAS device. For more information on this platform,
---- linux-2.6.15/arch/arm/mach-ixp4xx/nslu2-setup.c	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.15/arch/arm/mach-ixp4xx/nslu2-setup.c	1970-01-01 00:00:00.000000000 +0000
-@@ -16,11 +16,14 @@
- #include <linux/kernel.h>
- #include <linux/serial.h>
- #include <linux/serial_8250.h>
-+#include <linux/mtd/mtd.h>
- 
- #include <asm/mach-types.h>
- #include <asm/mach/arch.h>
- #include <asm/mach/flash.h>
- 
-+#include <net/maclist.h>
-+
- static struct flash_platform_data nslu2_flash_data = {
- 	.map_name		= "cfi_probe",
- 	.width			= 2,
-@@ -112,6 +115,37 @@ static void nslu2_power_off(void)
- 	gpio_line_set(NSLU2_PO_GPIO, IXP4XX_GPIO_HIGH);
- }
- 
-+/*
-+ * When the RedBoot partition is added the MAC address is read from
-+ * it.
-+ */
-+void flash_add(struct mtd_info *mtd) {
-+	if (strcmp(mtd->name, "RedBoot") == 0) {
-+		size_t retlen;
-+		u_char mac[6];
-+
-+		/* The MAC is at a known offset... */
-+		if (mtd->read(mtd, 0x3FFB0, 6, &retlen, mac) == 0 && retlen == 6) {
-+			printk(KERN_INFO "NSLU2 MAC: %.2x:%.2x:%.2x:%.2x:%.2x:%.2x\n",
-+				mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]);
-+			maclist_add(mac);
-+		} else {
-+			printk(KERN_ERR "NSLU2 MAC: read failed\n");
-+		}
-+	}
-+}
-+
-+/*
-+ * Nothing to do on remove at present.
-+ */
-+void flash_remove(struct mtd_info *mtd) {
-+}
-+
-+struct mtd_notifier flash_notifier = {
-+	.add = flash_add,
-+	.remove = flash_remove,
-+};
-+
- static void __init nslu2_init(void)
- {
- 	/* The NSLU2 has a 33MHz crystal on board - 1.01% different
-@@ -119,6 +153,11 @@ static void __init nslu2_init(void)
- 	 */
- 	ixp4xx_set_board_tick_rate(66000000);
- 
-+	/* The flash has an ethernet MAC embedded in it which we need,
-+	 * that is all this notifier does.
-+	 */
-+	register_mtd_user(&flash_notifier);
-+
- 	ixp4xx_sys_init();
- 
- 	pm_power_off = nslu2_power_off;
diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6/compile-switches.patch b/packages/obsolete/nslu2/nslu2-kernel/2.6/compile-switches.patch
deleted file mode 100644
index 4b7a688313..0000000000
--- a/packages/obsolete/nslu2/nslu2-kernel/2.6/compile-switches.patch
+++ /dev/null
@@ -1,58 +0,0 @@
---- linux-2.6.11/arch/arm/Makefile.orig	2005-03-20 15:02:07.587138712 -0800
-+++ linux-2.6.11/arch/arm/Makefile	2005-03-20 15:10:36.546765088 -0800
-@@ -33,6 +33,12 @@
- AFLAGS		+= -mlittle-endian
- endif
- 
-+ifeq ($(CONFIG_ARM_THUMB_INTERWORK),y)
-+CFLAGS		+= -mthumb-interwork
-+else
-+CFLAGS		+= -mno-thumb-interwork
-+endif
-+
- comma = ,
- 
- # This selects which instruction set is used.
-@@ -43,6 +49,8 @@
- arch-$(CONFIG_CPU_32v5)		:=-D__LINUX_ARM_ARCH__=5 $(call cc-option,-march=armv5te,-march=armv4)
- arch-$(CONFIG_CPU_32v4)		:=-D__LINUX_ARM_ARCH__=4 -march=armv4
- arch-$(CONFIG_CPU_32v3)		:=-D__LINUX_ARM_ARCH__=3 -march=armv3
-+# The following overrides the CPU_32v5 setting if specified
-+arch-$(CONFIG_ARCH_XSCALE)	:=-D__LINUX_ARM_ARCH__=5 $(call cc-option,-march=xscale,-march=armv5te)
- 
- # This selects how we optimise for the processor.
- tune-$(CONFIG_CPU_ARM610)	:=-mtune=arm610
---- linux-2.6.11/arch/arm/mm/Kconfig.orig	2005-03-20 14:54:07.927058128 -0800
-+++ linux-2.6.11/arch/arm/mm/Kconfig	2005-03-20 15:01:26.727350344 -0800
-@@ -366,6 +366,31 @@
- 
- 	  If you don't know what this all is, saying Y is a safe choice.
- 
-+config ARM_THUMB_INTERWORK
-+	bool "Support Thumb code within the kernel"
-+	depends on CPU_ARM720T || CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM1020 || CPU_ARM1020E || CPU_ARM1022 || CPU_ARM1026 || CPU_XSCALE || CPU_V6
-+	default n
-+	help
-+	  Say Y to compile the whole kernel with support for the interworking
-+	  of the 16 bit thumb instruction set and 32 bit ARM instruction set.
-+
-+	  You only need this if some parts of the kernel will be compiled
-+	  as thumb code, this is not usual.  It increases the total kernel
-+	  size by about 3%.
-+
-+config ARCH_XSCALE
-+	bool "Use -march=xscale in preference to -march=armv5te"
-+	depends on CPU_XSCALE
-+	default y
-+	help
-+	  Say yes to ask gcc to use the xscale architecture (instruction set)
-+	  in preference to armv5te.  This allows gcc to use the extra xscale
-+	  instructions but means the code will not run on a standard (non-xscale)
-+	  armv5te.  At present this makes no difference - gcc 3.4.3 does not
-+	  generate any xscale specific instructions - however gcc 3.4.3 does
-+	  generate slightly more optimal instructions if this is specified (this
-+	  is an error inside gcc 3.4.3 which should be fixed in 4.1.)
-+
- config CPU_BIG_ENDIAN
- 	bool "Build big-endian kernel"
- 	depends on ARCH_SUPPORTS_BIG_ENDIAN
diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6/ixp4xx-regs.patch b/packages/obsolete/nslu2/nslu2-kernel/2.6/ixp4xx-regs.patch
deleted file mode 100644
index 32f7e3ccb8..0000000000
--- a/packages/obsolete/nslu2/nslu2-kernel/2.6/ixp4xx-regs.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- linux-2.6.11/.pc/2.6.patch/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h	2005-03-01 23:37:49.000000000 -0800
-+++ linux-2.6.11/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h	2005-06-17 17:51:32.569981939 -0700
-@@ -52,7 +52,7 @@
-  * Expansion BUS Configuration registers
-  */
- #define IXP4XX_EXP_CFG_BASE_PHYS	(0xC4000000)
--#define IXP4XX_EXP_CFG_BASE_VIRT	(0xFFBFD000)
-+#define IXP4XX_EXP_CFG_BASE_VIRT	(0xFFBFE000)
- #define IXP4XX_EXP_CFG_REGION_SIZE	(0x00001000)
- 
- /*
diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6/nslu2-io_rpbutton.patch b/packages/obsolete/nslu2/nslu2-kernel/2.6/nslu2-io_rpbutton.patch
deleted file mode 100644
index b5ce101d68..0000000000
--- a/packages/obsolete/nslu2/nslu2-kernel/2.6/nslu2-io_rpbutton.patch
+++ /dev/null
@@ -1,139 +0,0 @@
---- nslu2-io.c.old	2da1d3f5c0aa0804c5769588337077ddcb35c5e9
-+++ linux-2.6.12.2/arch/arm/mach-ixp4xx/nslu2-io.c	e895da638b4aae16a11fafe52ae0b063645a9a12
-@@ -158,6 +158,8 @@
- #define LED_DISK2	3
- #define LED_ALL		4
- 
-+static int nslu2_shutdown_in_progress = 0;
-+
- static unsigned long init_jiffy = 0;			//jiffies at init time
- static unsigned long rb_presses = 0;			//number of reset button presses
- static unsigned long ontime = 50;
-@@ -503,40 +505,20 @@
- static irqreturn_t n2pb_handler (int irq, void *dev_id, struct pt_regs *regs)
- {
- 	void *ret;
--	
--	wake_up(&n2pb_waitq);	
--	remove_proc_entry(PWR_OFF_STR, NULL);		//no parent	
--	n2_buzz(N2_BEEP_PITCH_MED, N2_BEEP_DUR_MED);
--	ret = create_proc_entry(PWR_OFF_STR, 0, NULL);
--	nslu2_io_debug((KERN_DEBUG "cpe ret = %p\n", ret));
--
--// WARNING: This is RUDE...it unconditionally pulls the power plug.
--// Your data will be at risk...since this is just a test system
--// I am leaving it enabled...eventually userland needs to get the
--// message, do an orderly shutdown and use an ioctl or something in
--// /proc/powerdowm to actually have us pull the plug.
--
--	machine_power_off();
--
-+	if (!nslu2_shutdown_in_progress++) {			
-+		wake_up(&n2pb_waitq);	
-+		remove_proc_entry(PWR_OFF_STR, NULL);		//no parent	
-+		n2_buzz(N2_BEEP_PITCH_HIGH, N2_BEEP_DUR_SHORT); // Short, high-pitched "OK"
-+		ret = create_proc_entry(PWR_OFF_STR, 0, NULL);
-+		nslu2_io_debug((KERN_DEBUG "Powerbutton pressed. Shutting down. cpe ret = %p\n", ret));
-+		kill_proc(1,SIGINT,1);				// Signal init to shut down
-+	} else {
-+	        n2_buzz(N2_BEEP_PITCH_LOW, N2_BEEP_DUR_MED);    // Make a scary noise!
-+		nslu2_io_debug((KERN_DEBUG "Powerbutton pressed while already in shutdown")); // Whine!
-+	}				 
- 	return IRQ_HANDLED;
- }
- 
--//==================================================================================================
--//
--//static void do_rb_timeout(unsigned long data)
--//{
--//	int i;
--//
--//	for (i = 0; i < rb_presses; i++)
--//		n2_buzz(N2_BEEP_PITCH_MED,N2_BEEP_DUR_SHORT);
--//	return;
--//}
--//
--//==================================================================================================
--// does nothing -- waiting for userland to define
--// This thing is sorta braindead...edge triggered IRQs aren't available in the drivers yet...so
--// we hang in a loop until the button is no longer pressed
--
- struct testr {
- 	int	ctl;
- 	long	param;
-@@ -544,72 +526,11 @@
- 
- static irqreturn_t n2rb_handler (int irq, void *dev_id, struct pt_regs *regs)
- {
-+//	This doesn't reset the NSLU2. It powers it off. Close enough, since reset is unreliable
- 
--	static struct testr test[] = {
--				 { N2LM_ALL_OFF,0 },
--				 { N2LM_ON,0 },
--				 { N2LM_OFF,0 },
--				 { N2LM_ON,1 },
--				 { N2LM_ALL_OFF,1 },
--				 { N2LM_ON,2 },
--				 { N2LM_OFF,2 },
--				 { N2LM_ON,3 },
--				 { N2LM_OFF,3 },
--				 { N2LM_BLINK,0 },
--				 { N2LM_OFF,0 },
--				 { N2LM_BLINK,1 },
--				 { N2LM_OFF,1 },
--				 { N2LM_BLINK,2 },
--				 { N2LM_OFF,2 },
--				 { N2LM_BLINK,3 },
--				 { N2LM_OFF,3 },
--				 { N2LM_ALL_OFF,0 },
--				 { N2LM_ALT,1 },
--				 { N2LM_OFF,1 },
--				 { N2LM_ALL_ON,0 }
--	};
--
--	nslu2_io_debug(("Reset Entry IRQ =%d Presses = %d Jiffies = %08lx\tIO = %x\tIOW = %x\n", irq, rb_presses, jiffies, (int)_IO('M',rb_presses), (int)_IOW('M',rb_presses,long)));
--
- 	wake_up(&n2rb_waitq);	
--  	while ((*IXP4XX_GPIO_GPINR & GPIO_RB_BM) == 0)
--		;					//wait for button release
--
--	if (rb_presses > 20) 
--		rb_presses = 0;
--	tone = (rb_presses * 50) + 200;
--	ontime = (rb_presses*10) + 100;
--	offtime = 500 - (rb_presses*20);
--	nslu2_io_debug(("Ontime = %d\tOfftime = %d\tTone = %d\n",ontime,offtime,tone));
-- 	rb_presses++;
--
--	n2bz_ioctl(NULL,NULL, N2BZ_BEEPS, rb_presses);	
--	n2lm_ioctl(NULL,NULL, test[rb_presses].ctl, test[rb_presses].param);
--//	if (rb_presses == 0) {
--//		init_jiffy = jiffies;
--//		init_timer (&n2rb_timer);
--//		n2rb_timer.function = do_rb_timeout;
--//	};
--//
--//	if (rb_presses == 8)
--//		rb_presses = 0;
--//	if (rb_presses & 1)
--//		n2lm_ledon(test[rb_presses]);
--//	else
--//		n2lm_ledoff(test[rb_presses]);
--//	
--//	n2rb_timer.expires = (jiffies + RB_DELAY);
--//	add_timer (&n2rb_timer);
--//	if (rb_presses < 5) {
--//		if (rb_presses > 0)
--//			n2lm_ledoff(rb_presses);
--//		n2lm_ledon(++rb_presses);
--//		n2lm_timer_start(rb_presses);
--//	};
--
--	nslu2_io_debug((KERN_DEBUG "Reset Exit IRQ=%d Presses= %d Jiffies= %08lx\n", irq, rb_presses, jiffies));
--	return IRQ_HANDLED;
--
-+	machine_power_off();
-+	return IRQ_HANDLED;		// So we don't get a nobody cared error :-P
- }
- 
- //==================================================================================================
diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6/thumb-swi.patch b/packages/obsolete/nslu2/nslu2-kernel/2.6/thumb-swi.patch
deleted file mode 100644
index 2e73bb103f..0000000000
--- a/packages/obsolete/nslu2/nslu2-kernel/2.6/thumb-swi.patch
+++ /dev/null
@@ -1,19 +0,0 @@
-# This patch changes the thumb swi handling for any thumb swi with
-# an immediate value != 0, those swis are mapped into the arm
-# specific swis.  This implements a thumb breakpoint swi.
---- linux-2.6.12.2/arch/arm/kernel/entry-common.S.orig	2005-09-19 12:48:42.323365573 -0700
-+++ linux-2.6.12.2/arch/arm/kernel/entry-common.S	2005-09-19 13:31:19.004247358 -0700
-@@ -137,8 +137,11 @@
- 	 */
- #ifdef CONFIG_ARM_THUMB
- 	tst	r8, #PSR_T_BIT			@ this is SPSR from save_user_regs
--	addne	scno, r7, #__NR_SYSCALL_BASE	@ put OS number in
--	ldreq	scno, [lr, #-4]
-+	ldrneh	ip, [lr, #-2]			@ thumb swi instruction
-+	ldreq	scno, [lr, #-4]			@ arm swi instruction
-+	addne	scno, r7, #__NR_SYSCALL_BASE	@ put OS number in to thumb r7 value
-+	bicnes	ip, ip, #0xff00			@ clear thumb swi bits
-+	addne	scno, ip, #__ARM_NR_BASE	@ thumb swi0->r7, swi!0->arm swi
- #else
- 	ldr	scno, [lr, #-4]			@ get SWI instruction
- #endif
diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6/timer.patch b/packages/obsolete/nslu2/nslu2-kernel/2.6/timer.patch
deleted file mode 100644
index 6279746e64..0000000000
--- a/packages/obsolete/nslu2/nslu2-kernel/2.6/timer.patch
+++ /dev/null
@@ -1,24 +0,0 @@
-# Fix for the NSLU2 timer problem (tickadj 10101.01 when it should be 10000)
-# Also contains a fix for the more generate problem on the ixp4xx in that the
-# Intel spec says to use a 33.33MHz crystal, not 33.333333Mhz
-
---- linux-2.6.12.2/include/asm-arm/arch-ixp4xx/timex.h.orig	2005-08-05 11:02:09.872690723 -0700
-+++ linux-2.6.12.2/include/asm-arm/arch-ixp4xx/timex.h	2005-08-05 11:45:08.786971567 -0700
-@@ -7,7 +7,14 @@
- 
- /*
-  * We use IXP425 General purpose timer for our timer needs, it runs at 
-- * 66.66... MHz
-+ * 66.66 MHz (exactly) by the Intel specification.
-  */
--#define CLOCK_TICK_RATE (66666666)
--
-+#if 0
-+#define CLOCK_TICK_RATE (66660000)
-+#else
-+/*
-+ * Unfortunately the NSLU2 has a 33MHz crystal, so the rate is not the
-+ * specified one.
-+ */
-+#define CLOCK_TICK_RATE (66000000)
-+#endif
diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6/x1205-rtc.patch b/packages/obsolete/nslu2/nslu2-kernel/2.6/x1205-rtc.patch
deleted file mode 100644
index 913f44e2ae..0000000000
--- a/packages/obsolete/nslu2/nslu2-kernel/2.6/x1205-rtc.patch
+++ /dev/null
@@ -1,38 +0,0 @@
---- linux-2.6.11/.pc/2.6.patch/drivers/i2c/chips/Kconfig	2005-06-17 17:51:28.635578329 -0700
-+++ linux-2.6.11/drivers/i2c/chips/Kconfig	2005-06-17 17:51:32.565982545 -0700
-@@ -430,6 +430,15 @@
- 	  
- 	  This driver can also be built as a module.  If so, the module
- 	  will be called isp1301_omap.
-+config SENSORS_X1205
-+       tristate "Xicor X1205 RTC chip"
-+       depends on I2C && EXPERIMENTAL
-+       select I2C_SENSOR
-+       help
-+         If you say yes here you get support for the Xicor x1205 RTC chip.
-+ 
-+         This driver can also be built as a module.  If so, the module
-+         will be called x1205-rtc
- 
- config SENSORS_M41T00
- 	tristate "ST M41T00 RTC chip"
---- linux-2.6.11/.pc/2.6.patch/drivers/i2c/chips/Makefile	2005-06-17 17:51:28.636578177 -0700
-+++ linux-2.6.11/drivers/i2c/chips/Makefile	2005-06-17 17:51:32.566982394 -0700
-@@ -41,6 +41,7 @@
- obj-$(CONFIG_SENSORS_VIA686A)	+= via686a.o
- obj-$(CONFIG_SENSORS_W83L785TS)	+= w83l785ts.o
- obj-$(CONFIG_ISP1301_OMAP)	+= isp1301_omap.o
-+obj-$(CONFIG_SENSORS_X1205)     += x1205-rtc.o
- 
- ifeq ($(CONFIG_I2C_DEBUG_CHIP),y)
- EXTRA_CFLAGS += -DDEBUG
---- linux-2.6.11/.pc/2.6.patch/include/linux/i2c-id.h	2005-06-17 17:51:31.358165630 -0700
-+++ linux-2.6.11/include/linux/i2c-id.h	2005-06-17 17:51:32.569981939 -0700
-@@ -108,6 +108,7 @@
- #define I2C_DRIVERID_TDA7313	62	/* TDA7313 audio processor	*/
- #define I2C_DRIVERID_MAX6900	63	/* MAX6900 real-time clock	*/
- #define I2C_DRIVERID_SAA7114H	64	/* video decoder		*/
-+#define I2C_DRIVERID_X1205	0xF0
- 
- 
- #define I2C_DRIVERID_EXP0	0xF0	/* experimental use id's	*/
diff --git a/packages/obsolete/nslu2/nslu2-kernel/files/.mtn2git_empty b/packages/obsolete/nslu2/nslu2-kernel/files/.mtn2git_empty
deleted file mode 100644
index e69de29bb2..0000000000
--- a/packages/obsolete/nslu2/nslu2-kernel/files/.mtn2git_empty
+++ /dev/null
diff --git a/packages/obsolete/nslu2/nslu2-kernel/files/anonymiser.patch b/packages/obsolete/nslu2/nslu2-kernel/files/anonymiser.patch
deleted file mode 100644
index 3384b15fe2..0000000000
--- a/packages/obsolete/nslu2/nslu2-kernel/files/anonymiser.patch
+++ /dev/null
@@ -1,22 +0,0 @@
---- linux-2.6.11.2/scripts/mkcompile_h.orig	2005-05-07 05:27:02.440000000 +0000
-+++ linux-2.6.11.2/scripts/mkcompile_h	2005-05-07 05:28:30.360000000 +0000
-@@ -43,16 +43,9 @@
-   echo \#define UTS_VERSION \"`echo $UTS_VERSION | $UTS_TRUNCATE`\"
- 
-   echo \#define LINUX_COMPILE_TIME \"`LC_ALL=C LANG=C date +%T`\"
--  echo \#define LINUX_COMPILE_BY \"`whoami`\"
--  echo \#define LINUX_COMPILE_HOST \"`hostname | $UTS_TRUNCATE`\"
--
--  if [ -x /bin/dnsdomainname ]; then
--    echo \#define LINUX_COMPILE_DOMAIN \"`dnsdomainname | $UTS_TRUNCATE`\"
--  elif [ -x /bin/domainname ]; then
--    echo \#define LINUX_COMPILE_DOMAIN \"`domainname | $UTS_TRUNCATE`\"
--  else
--    echo \#define LINUX_COMPILE_DOMAIN
--  fi
-+  echo \#define LINUX_COMPILE_BY \"openslug\"
-+  echo \#define LINUX_COMPILE_HOST \"openslug.org\"
-+  echo \#define LINUX_COMPILE_DOMAIN \"openslug.org\"
- 
-   echo \#define LINUX_COMPILER \"`$CC -v 2>&1 | tail -n 1`\"
- ) > .tmpcompile
diff --git a/packages/obsolete/nslu2/nslu2-kernel_2.6.14-mm1.bb b/packages/obsolete/nslu2/nslu2-kernel_2.6.14-mm1.bb
deleted file mode 100644
index dff6b0e4b0..0000000000
--- a/packages/obsolete/nslu2/nslu2-kernel_2.6.14-mm1.bb
+++ /dev/null
@@ -1,38 +0,0 @@
-# Kernel for NSLU2
-#
-# Increment PR_CONFIG for changes to the nslu2-kernel specific
-# defconfig (do *NOT* increment anything in here for changes
-# to other kernel configs!)
-PR_CONFIG = "0"
-#
-# Increment the number below (i.e. the digits after PR) when
-# making changes within this file or for changes to the patches
-# applied to the kernel.
-PR = "r1.${PR_CONFIG}"
-
-require nslu2-kernel.inc
-
-# N2K_PATCHES - full list of patches to apply
-N2K_PATCHES = "\
-	file://00-memory-h-page-shift.patch;patch=1 \
-	file://90-ixp4xx-pci-le.patch;patch=1 \
-	file://18-ixp4xx-io-h-addr.patch;patch=1 \
-	file://19-jffs2-force-be.patch;patch=1 \
-	file://20-timer.patch;patch=1 \
-	file://29-ipv4-route-c-spinlock.patch;patch=1 \
-	file://30-i2c-x1205-mm1.patch;patch=1 \
-	file://50-nslu2-arch.patch;patch=1 \
-	file://55-nslu2-rtc.patch;patch=1 \
-	file://60-nslu2-beeper.patch;patch=1 \
-	file://70-nslu2-io.patch;patch=1 \
-	file://75-nslu2-leds.patch;patch=1 \
-	file://80-nslu2-class-device-create.patch;patch=1 \
-	file://90-pegasus.patch;patch=1 \
-	file://anonymiser.patch;patch=1 \
-"
-
-# These options get added to the kernel command line, only put things
-# specific to the bootstrap of *this* kernel in here - DISTRO specfic
-# config must be in CMDLINE_ROOT (see the full definition of CMDLINE
-# in nslu2-kernel.inc)
-CMDLINE_KERNEL_OPTIONS = "x1205.hctosys=1"
diff --git a/packages/obsolete/nslu2/nslu2-kernel_2.6.14.5.bb b/packages/obsolete/nslu2/nslu2-kernel_2.6.14.5.bb
deleted file mode 100644
index b7790be8be..0000000000
--- a/packages/obsolete/nslu2/nslu2-kernel_2.6.14.5.bb
+++ /dev/null
@@ -1,42 +0,0 @@
-# Kernel for NSLU2
-#
-# Increment PR_CONFIG for changes to the nslu2-kernel specific
-# defconfig (do *NOT* increment anything in here for changes
-# to other kernel configs!)
-PR_CONFIG = "0"
-#
-# Increment the number below (i.e. the digits after PR) when
-# making changes within this file or for changes to the patches
-# applied to the kernel.
-PR = "r0.${PR_CONFIG}"
-
-require nslu2-kernel.inc
-
-# N2K_PATCHES - full list of patches to apply
-N2K_PATCHES = "\
-	file://90-ixp4xx-pci-le.patch;patch=1 \
-	file://10-ixp4xx-copy-from.patch;patch=1 \
-	file://10-ixp4xx-le.patch;patch=1 \
-	file://10-mtdpart-redboot-fis-byteswap.patch;patch=1 \
-	file://15-ixp4xx-writesb-l-w.patch;patch=1 \
-	file://18-ixp4xx-io-h-addr.patch;patch=1 \
-	file://19-jffs2-force-be.patch;patch=1 \
-	file://29-ipv4-route-c-spinlock.patch;patch=1 \
-	file://30-i2c-x1205.patch;patch=1 \
-	file://50-nslu2-arch.patch;patch=1 \
-	file://55-nslu2-rtc.patch;patch=1 \
-	file://60-nslu2-beeper.patch;patch=1 \
-	file://70-nslu2-io.patch;patch=1 \
-	file://75-nslu2-leds.patch;patch=1 \
-	file://90-pegasus.patch;patch=1 \
-	file://20-timer.patch;patch=1 \
-	file://91-maclist.patch;patch=1 \
-	file://92-nslu2-maclist.patch;patch=1 \
-	file://anonymiser.patch;patch=1 \
-"
-
-# These options get added to the kernel command line, only put things
-# specific to the bootstrap of *this* kernel in here - DISTRO specfic
-# config must be in CMDLINE_ROOT (see the full definition of CMDLINE
-# in nslu2-kernel.inc)
-CMDLINE_KERNEL_OPTIONS = "x1205.hctosys=1"
diff --git a/packages/obsolete/nslu2/nslu2-kernel_2.6.15.bb b/packages/obsolete/nslu2/nslu2-kernel_2.6.15.bb
deleted file mode 100644
index 68b2b56f1a..0000000000
--- a/packages/obsolete/nslu2/nslu2-kernel_2.6.15.bb
+++ /dev/null
@@ -1,35 +0,0 @@
-# Kernel for NSLU2
-#
-# Increment PR_CONFIG for changes to the nslu2-kernel specific
-# defconfig (do *NOT* increment anything in here for changes
-# to other kernel configs!)
-PR_CONFIG = "0"
-#
-# Increment the number below (i.e. the digits after PR) when
-# making changes within this file or for changes to the patches
-# applied to the kernel.
-PR = "r3.${PR_CONFIG}"
-
-require nslu2-kernel.inc
-
-# N2K_PATCHES - full list of patches to apply
-N2K_PATCHES = "\
-	file://00-memory-h-page-shift.patch;patch=1 \
-	file://10-mtdpart-redboot-fis-byteswap.patch;patch=1 \
-	file://15-jffs2-endian-config.patch;patch=1 \
-	file://40-rtc-class.patch;patch=1 \
-	file://40-scsi-idle.patch;patch=1 \
-	file://60-nslu2-beeper.patch;patch=1 \
-	file://75-nslu2-leds.patch;patch=1 \
-	file://80-nslu2-io.patch;patch=1 \
-	file://85-timer.patch;patch=1 \
-	file://91-maclist.patch;patch=1 \
-	file://92-nslu2-maclist.patch;patch=1 \
-	file://anonymiser.patch;patch=1 \
-"
-
-# These options get added to the kernel command line, only put things
-# specific to the bootstrap of *this* kernel in here - DISTRO specfic
-# config must be in CMDLINE_ROOT (see the full definition of CMDLINE
-# in nslu2-kernel.inc)
-CMDLINE_KERNEL_OPTIONS = "rtc-x1205.hctosys=1 rtc-x1205.probe=0,0x6f"