rename packages/ to recipes/ per earlier agreement

See links below for more details:
http://thread.gmane.org/gmane.comp.handhelds.openembedded/21326
http://thread.gmane.org/gmane.comp.handhelds.openembedded/21816

Signed-off-by: Denys Dmytriyenko <denis@denix.org>
Acked-by: Mike Westerhof <mwester@dls.net>
Acked-by: Philip Balister <philip@balister.org>
Acked-by: Khem Raj <raj.khem@gmail.com>
Acked-by: Marcin Juszkiewicz <hrw@openembedded.org>
Acked-by: Koen Kooi <koen@openembedded.org>
Acked-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com>

1 files changed, 0 insertions, 438 deletions

diff --git a/packages/linux/linux-2.6.24/ts72xx/ts72xx-rs485.patch b/packages/linux/linux-2.6.24/ts72xx/ts72xx-rs485.patch
deleted file mode 100644
index 17ee397f45..0000000000
--- a/packages/linux/linux-2.6.24/ts72xx/ts72xx-rs485.patch
+++ /dev/null
@@ -1,438 +0,0 @@
-RS485 auto mode support ported from 2.4 (diff against 2.6.19-rc6-git10)
-
-Signed-off-by: Petr Stetiar <ynezz@true.cz>
-
-diff --git a/drivers/serial/amba-pl010.c b/drivers/serial/amba-pl010.c
-index 4213fab..5b3c5ff 100644
---- a/drivers/serial/amba-pl010.c
-+++ b/drivers/serial/amba-pl010.c
-@@ -50,6 +50,7 @@
- #include <linux/amba/serial.h>
- 
- #include <asm/io.h>
-+#include <asm/hardware.h>
- 
- #define UART_NR		8
- 
-@@ -65,6 +66,11 @@
- #define UART_DUMMY_RSR_RX	256
- #define UART_PORT_SIZE		64
- 
-+#ifdef CONFIG_MACH_TS72XX
-+static void __iomem *ts_rs485_data9_register;
-+static void __iomem *ts_rs485_control_register;
-+#endif
-+
- /*
-  * We wrap our port structure around the generic uart_port.
-  */
-@@ -487,6 +493,107 @@ static int pl010_verify_port(struct uart
- 	return ret;
- }
- 
-+#ifdef CONFIG_MACH_TS72XX
-+static int ts72xx_rs485_init(void)
-+{
-+	ts_rs485_data9_register = ioremap(TS72XX_RS485_DATA9_PHYS_BASE, 4096);
-+	if (ts_rs485_data9_register == NULL) {
-+		return -1;
-+	}
-+
-+	ts_rs485_control_register = ioremap(TS72XX_RS485_CONTROL_PHYS_BASE, 4096);
-+	if (ts_rs485_control_register == NULL) {
-+		iounmap(ts_rs485_data9_register);
-+		return -1;
-+	}
-+
-+	return 0;
-+}
-+
-+static int ts72xx_auto485(struct uart_port *port, unsigned int cmd, unsigned long *arg)
-+{
-+	int baud, cflag, mode;
-+	int datalength;
-+
-+	mode = (int)*arg;
-+	if (!is_rs485_installed()) {
-+		printk("amba-pl010.c: this board does not support RS485 auto mode\n");
-+		return -EINVAL;
-+	}
-+
-+	if (port->line != 1) {
-+		printk("amba-pl010.c: auto RS485 mode is only supported on second port (/dev/ttyAM1)\n");
-+		return -EINVAL;
-+	}
-+
-+	datalength = 8;
-+	cflag = port->info->tty->termios->c_cflag ;
-+	if (cflag & PARENB)
-+		datalength++;
-+
-+	if (cflag & CSTOPB)
-+		datalength++;
-+
-+	baud = tty_get_baud_rate(port->info->tty);
-+
-+	switch (cmd) {
-+		case TIOC_SBCC485:
-+			if ((mode & TS72XX_RS485_AUTO485FD) || (mode & TS72XX_RS485_AUTO485HD)) {
-+				printk("amba-pl010.c: unsetting auto RS485 mode\n");
-+				__raw_writew(TS72XX_RS485_MODE_RS232, ts_rs485_control_register);
-+				__raw_writew(TS72XX_RS485_MODE_RS232, ts_rs485_data9_register);
-+			}
-+			break;
-+		case TIOC_SBCS485:
-+			if (mode & TS72XX_RS485_AUTO485FD) {
-+				printk ("amba-pl010.c: setting FULL duplex auto RS485 mode\n");
-+				__raw_writew(TS72XX_RS485_MODE_FD, ts_rs485_control_register);
-+				if (datalength > 8)
-+					__raw_writew(TS72XX_RS485_MODE_FD, ts_rs485_data9_register);
-+			} else if (mode & TS72XX_RS485_AUTO485HD) {
-+				printk("amba-pl010.c: setting HALF DUPLEX auto RS485 mode\n");
-+				switch (baud) {
-+					case 9600:
-+						__raw_writew(TS72XX_RS485_MODE_9600_HD, ts_rs485_control_register);
-+						break;
-+					case 19200:
-+						__raw_writew(TS72XX_RS485_MODE_19200_HD, ts_rs485_control_register);
-+						break;
-+					case 57600:
-+						__raw_writew(TS72XX_RS485_MODE_57600_HD, ts_rs485_control_register);
-+						break;
-+					case 115200:
-+						__raw_writew(TS72XX_RS485_MODE_115200_HD, ts_rs485_control_register);
-+						break;
-+					default:
-+					printk("amba-pl010.c: %d baud rate is not supported for auto RS485 mode\n", baud);
-+					return -1;
-+				}
-+				if (datalength > 8)
-+					__raw_writew(TS72XX_RS485_MODE_FD, ts_rs485_data9_register);
-+			}
-+			break;
-+	}
-+
-+	return 0;
-+}
-+#endif
-+
-+int pl010_ioctl(struct uart_port *port, unsigned int cmd, unsigned long arg)
-+{
-+#ifdef CONFIG_MACH_TS72XX
-+	switch (cmd) {
-+		case TIOC_SBCC485:
-+		case TIOC_SBCS485:
-+			return ts72xx_auto485(port, cmd, (unsigned long *)arg);
-+			break;
-+		default:
-+			return -ENOIOCTLCMD;
-+	}
-+#endif
-+	return -ENOIOCTLCMD;
-+}
-+
- static struct uart_ops amba_pl010_pops = {
- 	.tx_empty	= pl010_tx_empty,
- 	.set_mctrl	= pl010_set_mctrl,
-@@ -504,6 +611,7 @@ static struct uart_ops amba_pl010_pops =
- 	.request_port	= pl010_request_port,
- 	.config_port	= pl010_config_port,
- 	.verify_port	= pl010_verify_port,
-+	.ioctl		= pl010_ioctl,
- };
- 
- static struct uart_amba_port *amba_ports[UART_NR];
-@@ -746,6 +854,15 @@ static int __init pl010_init(void)
- 	ret = uart_register_driver(&amba_reg);
- 	if (ret == 0) {
- 		ret = amba_driver_register(&pl010_driver);
-+#ifdef CONFIG_MACH_TS72XX
-+		if (!ret && is_rs485_installed()) {
-+			ret = ts72xx_rs485_init();
-+			if (ret)
-+				printk("amba-pl010.c: ts72xx_rs485_init() failed\n");
-+			else
-+				printk("amba-pl010.c: auto RS485 mode initialized\n");
-+		}
-+#endif
- 		if (ret)
- 			uart_unregister_driver(&amba_reg);
- 	}
-@@ -756,6 +873,10 @@ static void __exit pl010_exit(void)
- {
- 	amba_driver_unregister(&pl010_driver);
- 	uart_unregister_driver(&amba_reg);
-+#ifdef CONFIG_MACH_TS72XX
-+	iounmap(ts_rs485_data9_register);
-+	iounmap(ts_rs485_control_register);
-+#endif
- }
- 
- module_init(pl010_init);
-diff --git a/include/asm-arm/arch-ep93xx/ts72xx.h b/include/asm-arm/arch-ep93xx/ts72xx.h
-index a94f63f..4c9396b 100644
---- a/include/asm-arm/arch-ep93xx/ts72xx.h
-+++ b/include/asm-arm/arch-ep93xx/ts72xx.h
-@@ -68,6 +68,16 @@
- #define TS72XX_RTC_DATA_PHYS_BASE	0x11700000
- #define TS72XX_RTC_DATA_SIZE		0x00001000
- 
-+#define TS72XX_RS485_CONTROL_PHYS_BASE	0x22C00000
-+#define TS72XX_RS485_DATA9_PHYS_BASE	0x23000000
-+#define TS72XX_RS485_AUTO485FD		1
-+#define TS72XX_RS485_AUTO485HD		2
-+#define TS72XX_RS485_MODE_RS232	0x00
-+#define TS72XX_RS485_MODE_FD		0x01
-+#define TS72XX_RS485_MODE_9600_HD	0x04
-+#define TS72XX_RS485_MODE_19200_HD	0x05
-+#define TS72XX_RS485_MODE_57600_HD	0x06
-+#define TS72XX_RS485_MODE_115200_HD	0x07
- 
- #ifndef __ASSEMBLY__
- #include <asm/io.h>
-@@ -87,6 +100,12 @@ static inline int board_is_ts7260(void)
- 	return __raw_readb(TS72XX_MODEL_VIRT_BASE) == TS72XX_MODEL_TS7260;
- }
- 
-+static inline int is_rs485_installed(void)
-+{
-+	return !!(__raw_readb(TS72XX_OPTIONS_VIRT_BASE) &
-+					TS72XX_OPTIONS_COM2_RS485);
-+}
-+
- static inline int is_max197_installed(void)
- {
- 	return !!(__raw_readb(TS72XX_OPTIONS_VIRT_BASE) &
-diff --git a/include/asm-arm/ioctls.h b/include/asm-arm/ioctls.h
-index bb9a7aa..4d7dad1 100644
---- a/include/asm-arm/ioctls.h
-+++ b/include/asm-arm/ioctls.h
-@@ -66,6 +66,9 @@
- #define TIOCGICOUNT	0x545D	/* read serial port inline interrupt counts */
- #define FIOQSIZE	0x545E
- 
-+#define TIOC_SBCC485	0x545F /* TS72xx RTS/485 mode clear */
-+#define TIOC_SBCS485	0x5460 /* TS72xx RTS/485 mode set */
-+
- /* Used for packet mode */
- #define TIOCPKT_DATA		 0
- #define TIOCPKT_FLUSHREAD	 1
-RS485 auto mode support ported from 2.4 (diff against 2.6.19-rc6-git10)
-
-Signed-off-by: Petr Stetiar <ynezz@true.cz>
-
-diff --git a/drivers/serial/amba-pl010.c b/drivers/serial/amba-pl010.c
-index 4213fab..5b3c5ff 100644
---- a/drivers/serial/amba-pl010.c
-+++ b/drivers/serial/amba-pl010.c
-@@ -50,6 +50,7 @@
- #include <linux/amba/serial.h>
- 
- #include <asm/io.h>
-+#include <asm/hardware.h>
- 
- #define UART_NR		8
- 
-@@ -65,6 +66,11 @@
- #define UART_DUMMY_RSR_RX	256
- #define UART_PORT_SIZE		64
- 
-+#ifdef CONFIG_MACH_TS72XX
-+static void __iomem *ts_rs485_data9_register;
-+static void __iomem *ts_rs485_control_register;
-+#endif
-+
- /*
-  * We wrap our port structure around the generic uart_port.
-  */
-@@ -487,6 +493,107 @@ static int pl010_verify_port(struct uart
- 	return ret;
- }
- 
-+#ifdef CONFIG_MACH_TS72XX
-+static int ts72xx_rs485_init(void)
-+{
-+	ts_rs485_data9_register = ioremap(TS72XX_RS485_DATA9_PHYS_BASE, 4096);
-+	if (ts_rs485_data9_register == NULL) {
-+		return -1;
-+	}
-+
-+	ts_rs485_control_register = ioremap(TS72XX_RS485_CONTROL_PHYS_BASE, 4096);
-+	if (ts_rs485_control_register == NULL) {
-+		iounmap(ts_rs485_data9_register);
-+		return -1;
-+	}
-+
-+	return 0;
-+}
-+
-+static int ts72xx_auto485(struct uart_port *port, unsigned int cmd, unsigned long *arg)
-+{
-+	int baud, cflag, mode;
-+	int datalength;
-+
-+	mode = (int)*arg;
-+	if (!is_rs485_installed()) {
-+		printk("amba-pl010.c: this board does not support RS485 auto mode\n");
-+		return -EINVAL;
-+	}
-+
-+	if (port->line != 1) {
-+		printk("amba-pl010.c: auto RS485 mode is only supported on second port (/dev/ttyAM1)\n");
-+		return -EINVAL;
-+	}
-+
-+	datalength = 8;
-+	cflag = port->info->tty->termios->c_cflag ;
-+	if (cflag & PARENB)
-+		datalength++;
-+
-+	if (cflag & CSTOPB)
-+		datalength++;
-+
-+	baud = tty_get_baud_rate(port->info->tty);
-+
-+	switch (cmd) {
-+		case TIOC_SBCC485:
-+			if ((mode & TS72XX_RS485_AUTO485FD) || (mode & TS72XX_RS485_AUTO485HD)) {
-+				printk("amba-pl010.c: unsetting auto RS485 mode\n");
-+				__raw_writew(TS72XX_RS485_MODE_RS232, ts_rs485_control_register);
-+				__raw_writew(TS72XX_RS485_MODE_RS232, ts_rs485_data9_register);
-+			}
-+			break;
-+		case TIOC_SBCS485:
-+			if (mode & TS72XX_RS485_AUTO485FD) {
-+				printk ("amba-pl010.c: setting FULL duplex auto RS485 mode\n");
-+				__raw_writew(TS72XX_RS485_MODE_FD, ts_rs485_control_register);
-+				if (datalength > 8)
-+					__raw_writew(TS72XX_RS485_MODE_FD, ts_rs485_data9_register);
-+			} else if (mode & TS72XX_RS485_AUTO485HD) {
-+				printk("amba-pl010.c: setting HALF DUPLEX auto RS485 mode\n");
-+				switch (baud) {
-+					case 9600:
-+						__raw_writew(TS72XX_RS485_MODE_9600_HD, ts_rs485_control_register);
-+						break;
-+					case 19200:
-+						__raw_writew(TS72XX_RS485_MODE_19200_HD, ts_rs485_control_register);
-+						break;
-+					case 57600:
-+						__raw_writew(TS72XX_RS485_MODE_57600_HD, ts_rs485_control_register);
-+						break;
-+					case 115200:
-+						__raw_writew(TS72XX_RS485_MODE_115200_HD, ts_rs485_control_register);
-+						break;
-+					default:
-+					printk("amba-pl010.c: %d baud rate is not supported for auto RS485 mode\n", baud);
-+					return -1;
-+				}
-+				if (datalength > 8)
-+					__raw_writew(TS72XX_RS485_MODE_FD, ts_rs485_data9_register);
-+			}
-+			break;
-+	}
-+
-+	return 0;
-+}
-+#endif
-+
-+int pl010_ioctl(struct uart_port *port, unsigned int cmd, unsigned long arg)
-+{
-+#ifdef CONFIG_MACH_TS72XX
-+	switch (cmd) {
-+		case TIOC_SBCC485:
-+		case TIOC_SBCS485:
-+			return ts72xx_auto485(port, cmd, (unsigned long *)arg);
-+			break;
-+		default:
-+			return -ENOIOCTLCMD;
-+	}
-+#endif
-+	return -ENOIOCTLCMD;
-+}
-+
- static struct uart_ops amba_pl010_pops = {
- 	.tx_empty	= pl010_tx_empty,
- 	.set_mctrl	= pl010_set_mctrl,
-@@ -504,6 +611,7 @@ static struct uart_ops amba_pl010_pops =
- 	.request_port	= pl010_request_port,
- 	.config_port	= pl010_config_port,
- 	.verify_port	= pl010_verify_port,
-+	.ioctl		= pl010_ioctl,
- };
- 
- static struct uart_amba_port *amba_ports[UART_NR];
-@@ -746,6 +854,15 @@ static int __init pl010_init(void)
- 	ret = uart_register_driver(&amba_reg);
- 	if (ret == 0) {
- 		ret = amba_driver_register(&pl010_driver);
-+#ifdef CONFIG_MACH_TS72XX
-+		if (!ret && is_rs485_installed()) {
-+			ret = ts72xx_rs485_init();
-+			if (ret)
-+				printk("amba-pl010.c: ts72xx_rs485_init() failed\n");
-+			else
-+				printk("amba-pl010.c: auto RS485 mode initialized\n");
-+		}
-+#endif
- 		if (ret)
- 			uart_unregister_driver(&amba_reg);
- 	}
-@@ -756,6 +873,10 @@ static void __exit pl010_exit(void)
- {
- 	amba_driver_unregister(&pl010_driver);
- 	uart_unregister_driver(&amba_reg);
-+#ifdef CONFIG_MACH_TS72XX
-+	iounmap(ts_rs485_data9_register);
-+	iounmap(ts_rs485_control_register);
-+#endif
- }
- 
- module_init(pl010_init);
-diff --git a/include/asm-arm/arch-ep93xx/ts72xx.h b/include/asm-arm/arch-ep93xx/ts72xx.h
-index a94f63f..4c9396b 100644
---- a/include/asm-arm/arch-ep93xx/ts72xx.h
-+++ b/include/asm-arm/arch-ep93xx/ts72xx.h
-@@ -68,6 +68,16 @@
- #define TS72XX_RTC_DATA_PHYS_BASE	0x11700000
- #define TS72XX_RTC_DATA_SIZE		0x00001000
- 
-+#define TS72XX_RS485_CONTROL_PHYS_BASE	0x22C00000
-+#define TS72XX_RS485_DATA9_PHYS_BASE	0x23000000
-+#define TS72XX_RS485_AUTO485FD		1
-+#define TS72XX_RS485_AUTO485HD		2
-+#define TS72XX_RS485_MODE_RS232	0x00
-+#define TS72XX_RS485_MODE_FD		0x01
-+#define TS72XX_RS485_MODE_9600_HD	0x04
-+#define TS72XX_RS485_MODE_19200_HD	0x05
-+#define TS72XX_RS485_MODE_57600_HD	0x06
-+#define TS72XX_RS485_MODE_115200_HD	0x07
- 
- #ifndef __ASSEMBLY__
- #include <asm/io.h>
-@@ -87,6 +100,12 @@ static inline int board_is_ts7260(void)
- 	return __raw_readb(TS72XX_MODEL_VIRT_BASE) == TS72XX_MODEL_TS7260;
- }
- 
-+static inline int is_rs485_installed(void)
-+{
-+	return !!(__raw_readb(TS72XX_OPTIONS_VIRT_BASE) &
-+					TS72XX_OPTIONS_COM2_RS485);
-+}
-+
- static inline int is_max197_installed(void)
- {
- 	return !!(__raw_readb(TS72XX_OPTIONS_VIRT_BASE) &
-diff --git a/include/asm-arm/ioctls.h b/include/asm-arm/ioctls.h
-index bb9a7aa..4d7dad1 100644
---- a/include/asm-arm/ioctls.h
-+++ b/include/asm-arm/ioctls.h
-@@ -66,6 +66,9 @@
- #define TIOCGICOUNT	0x545D	/* read serial port inline interrupt counts */
- #define FIOQSIZE	0x545E
- 
-+#define TIOC_SBCC485	0x545F /* TS72xx RTS/485 mode clear */
-+#define TIOC_SBCS485	0x5460 /* TS72xx RTS/485 mode set */
-+
- /* Used for packet mode */
- #define TIOCPKT_DATA		 0
- #define TIOCPKT_FLUSHREAD	 1