diff options
| author | John Bowler <jbowler@nslu2-linux.org> | 2006-01-22 09:14:24 +0000 |
|---|---|---|
| committer | OpenEmbedded Project <openembedded-devel@lists.openembedded.org> | 2006-01-22 09:14:24 +0000 |
| commit | 65fd7a75e0f5786a0582b33f7ba01e814692f992 (patch) | |
| tree | e7092ced8612d13498fcb4eb1190e55e63ab3bf9 /packages/linux/ixp4xx-kernel/2.6.15/96-nslu2-leds.patch | |
| parent | b23d1cb9a50613922861d94f8ff24005656877c3 (diff) | |
ixp4xx-kernel: new LED driver in 2.6.15.1
slugos-init: update for new LED support in 0.10
- the kernel now uses the RP LED driver code, the new patches add
a generic ixp4xx driver and board level definitions for nslu2, loft
and nas100d
Diffstat (limited to 'packages/linux/ixp4xx-kernel/2.6.15/96-nslu2-leds.patch')
| -rw-r--r-- | packages/linux/ixp4xx-kernel/2.6.15/96-nslu2-leds.patch | 90 |
1 files changed, 90 insertions, 0 deletions
diff --git a/packages/linux/ixp4xx-kernel/2.6.15/96-nslu2-leds.patch b/packages/linux/ixp4xx-kernel/2.6.15/96-nslu2-leds.patch new file mode 100644 index 0000000000..2898e83fdb --- /dev/null +++ b/packages/linux/ixp4xx-kernel/2.6.15/96-nslu2-leds.patch @@ -0,0 +1,90 @@ +NEW_LEDS support for the LinkSys NSLU2 + +Signed-off-by: John Bowler <jbowler@acm.org> + +--- linux-2.6.15/arch/arm/mach-ixp4xx/nslu2-setup.c 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.15/arch/arm/mach-ixp4xx/nslu2-setup.c 1970-01-01 00:00:00.000000000 +0000 +@@ -17,6 +17,7 @@ + #include <linux/serial.h> + #include <linux/serial_8250.h> + #include <linux/mtd/mtd.h> ++#include <linux/leds.h> + + #include <asm/setup.h> + #include <asm/memory.h> +@@ -50,6 +51,48 @@ static struct ixp4xx_i2c_pins nslu2_i2c_ + .scl_pin = NSLU2_SCL_PIN, + }; + ++#ifdef CONFIG_LEDS_CLASS ++static struct resource nslu2_led_resources[] = { ++ { ++ .name = "ready", /* green led */ ++ .start = NSLU2_LED_GRN, ++ .end = NSLU2_LED_GRN, ++ .flags = IXP4XX_GPIO_HIGH, ++ }, ++ { ++ .name = "status", /* red led */ ++ .start = NSLU2_LED_RED, ++ .end = NSLU2_LED_RED, ++ .flags = IXP4XX_GPIO_HIGH, ++ }, ++ { ++ .name = "disk-1", ++ .start = NSLU2_LED_DISK1, ++ .end = NSLU2_LED_DISK1, ++ .flags = IXP4XX_GPIO_LOW, ++ }, ++ { ++ .name = "disk-2", ++ .start = NSLU2_LED_DISK2, ++ .end = NSLU2_LED_DISK2, ++ .flags = IXP4XX_GPIO_LOW, ++ }, ++ { ++ .name = "buzzer", ++ .start = NSLU2_GPIO_BUZZ, ++ .end = NSLU2_GPIO_BUZZ, ++ .flags = IXP4XX_GPIO_LOW, ++ }, ++}; ++ ++static struct platform_device nslu2_leds = { ++ .name = "IXP4XX-GPIO-LED", ++ .id = -1, ++ .num_resources = ARRAY_SIZE(nslu2_led_resources), ++ .resource = nslu2_led_resources, ++}; ++#endif ++ + static struct platform_device nslu2_i2c_controller = { + .name = "IXP4XX-I2C", + .id = 0, +@@ -103,7 +146,6 @@ static struct platform_device nslu2_uart + static struct platform_device *nslu2_devices[] __initdata = { + &nslu2_i2c_controller, + &nslu2_flash, +- &nslu2_uart, + }; + + static void nslu2_power_off(void) +@@ -164,7 +206,18 @@ static void __init nslu2_init(void) + + pm_power_off = nslu2_power_off; + ++ /* This is only useful on a modified machine, but it is valuable ++ * to have it first in order to see debug messages, and so that ++ * it does *not* get removed if platform_add_devices fails! ++ */ ++ (void)platform_device_register(&nslu2_uart); ++ + platform_add_devices(nslu2_devices, ARRAY_SIZE(nslu2_devices)); ++ ++#ifdef CONFIG_LEDS_CLASS ++ /* We don't care whether or not this works. */ ++ (void)platform_device_register(&nslu2_leds); ++#endif + } + + /* |