Merge oe-devel@oe-devel.bkbits.net:openembedded

into hyperion.kergoth.com:/home/kergoth/code/openembedded

2004/12/09 03:39:39-06:00 kergoth.com!kergoth
Break people's builds again.. this time moving the packages into a packages/ subdir to clean things up a bit.

BKrev: 41b81f3dvlp3rU7_8MUXLcI8LDdDoA

3 files changed, 0 insertions, 546 deletions

diff --git a/ntop/ntop-3.0/autotools.patch b/ntop/ntop-3.0/autotools.patch
deleted file mode 100644
index e40735c681..0000000000
--- a/ntop/ntop-3.0/autotools.patch
+++ /dev/null
@@ -1,526 +0,0 @@
---- tmp/base/ntop-3.0-r0/ntop-3.0/acinclude.m4	2004-03-09 12:19:57.000000000 -0500
-+++ ntop-3.0/acinclude.m4	2004-03-09 12:19:57.000000000 -0500
-@@ -205,433 +205,3 @@
- fi
- # Finished expansion of NTOPCONFIGDEBUG_SETTINGS()
- ])
--## libtool.m4 - Configure libtool for the target system. -*-Shell-script-*-
--## Copyright (C) 1996-1999 Free Software Foundation, Inc.
--## Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
--##
--## This program is free software; you can redistribute it and/or modify
--## it under the terms of the GNU General Public License as published by
--## the Free Software Foundation; either version 2 of the License, or
--## (at your option) any later version.
--##
--## This program is distributed in the hope that it will be useful, but
--## WITHOUT ANY WARRANTY; without even the implied warranty of
--## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
--## General Public License for more details.
--##
--## You should have received a copy of the GNU General Public License
--## along with this program; if not, write to the Free Software
--## Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
--##
--## As a special exception to the GNU General Public License, if you
--## distribute this file as part of a program that contains a
--## configuration script generated by Autoconf, you may include it under
--## the same distribution terms that you use for the rest of that program.
--
--## 1.4.2 modified by BMSIII - Mar2004 - to eliminate 1.5.2 whines about
--## underquoted AC _ DEFUN 's 
--
--# serial 40 AC_PROG_LIBTOOL
--AC_DEFUN([AC_PROG_LIBTOOL],
--[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
--
--# Save cache, so that ltconfig can load it
--AC_CACHE_SAVE
--
--# Actually configure libtool.  ac_aux_dir is where install-sh is found.
--CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
--LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
--LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \
--DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \
--${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
--$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $host \
--|| AC_MSG_ERROR([libtool configure failed])
--
--# Reload cache, that may have been modified by ltconfig
--AC_CACHE_LOAD
--
--# This can be used to rebuild libtool when needed
--LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh"
--
--# Always use our own libtool.
--LIBTOOL='$(SHELL) $(top_builddir)/libtool'
--AC_SUBST(LIBTOOL)dnl
--
--# Redirect the config.log output again, so that the ltconfig log is not
--# clobbered by the next message.
--exec 5>>./config.log
--])
--
--AC_DEFUN([AC_LIBTOOL_SETUP],
--[AC_PREREQ(2.13)dnl
--AC_REQUIRE([AC_ENABLE_SHARED])dnl
--AC_REQUIRE([AC_ENABLE_STATIC])dnl
--AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl
--AC_REQUIRE([AC_CANONICAL_HOST])dnl
--AC_REQUIRE([AC_CANONICAL_BUILD])dnl
--AC_REQUIRE([AC_PROG_RANLIB])dnl
--AC_REQUIRE([AC_PROG_CC])dnl
--AC_REQUIRE([AC_PROG_LD])dnl
--AC_REQUIRE([AC_PROG_NM])dnl
--AC_REQUIRE([AC_PROG_LN_S])dnl
--dnl
--
--# Check for any special flags to pass to ltconfig.
--libtool_flags="--cache-file=$cache_file"
--test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
--test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
--test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
--test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc"
--test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
--ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN],
--[libtool_flags="$libtool_flags --enable-dlopen"])
--ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
--[libtool_flags="$libtool_flags --enable-win32-dll"])
--AC_ARG_ENABLE(libtool-lock,
--  [  --disable-libtool-lock  avoid locking (might break parallel builds)])
--test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
--test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
--
--# Some flags need to be propagated to the compiler or linker for good
--# libtool support.
--case "$host" in
--*-*-irix6*)
--  # Find out which ABI we are using.
--  echo '[#]line __oline__ "configure"' > conftest.$ac_ext
--  if AC_TRY_EVAL(ac_compile); then
--    case "`/usr/bin/file conftest.o`" in
--    *32-bit*)
--      LD="${LD-ld} -32"
--      ;;
--    *N32*)
--      LD="${LD-ld} -n32"
--      ;;
--    *64-bit*)
--      LD="${LD-ld} -64"
--      ;;
--    esac
--  fi
--  rm -rf conftest*
--  ;;
--
--*-*-sco3.2v5*)
--  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
--  SAVE_CFLAGS="$CFLAGS"
--  CFLAGS="$CFLAGS -belf"
--  AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
--    [AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])])
--  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
--    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
--    CFLAGS="$SAVE_CFLAGS"
--  fi
--  ;;
--
--ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
--[*-*-cygwin* | *-*-mingw*)
--  AC_CHECK_TOOL(DLLTOOL, dlltool, false)
--  AC_CHECK_TOOL(AS, as, false)
--  AC_CHECK_TOOL(OBJDUMP, objdump, false)
--  ;;
--])
--esac
--])
--
--# AC_LIBTOOL_DLOPEN - enable checks for dlopen support
--AC_DEFUN([AC_LIBTOOL_DLOPEN], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])])
--
--# AC_LIBTOOL_WIN32_DLL - declare package support for building win32 dll's
--AC_DEFUN([AC_LIBTOOL_WIN32_DLL], [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])])
--
--# AC_ENABLE_SHARED - implement the --enable-shared flag
--# Usage: AC_ENABLE_SHARED[(DEFAULT)]
--#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
--#   `yes'.
--AC_DEFUN([AC_ENABLE_SHARED], [dnl
--define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
--AC_ARG_ENABLE(shared,
--changequote(<<, >>)dnl
--<<  --enable-shared[=PKGS]  build shared libraries [default=>>AC_ENABLE_SHARED_DEFAULT],
--changequote([, ])dnl
--[p=${PACKAGE-default}
--case "$enableval" in
--yes) enable_shared=yes ;;
--no) enable_shared=no ;;
--*)
--  enable_shared=no
--  # Look at the argument we got.  We use all the common list separators.
--  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
--  for pkg in $enableval; do
--    if test "X$pkg" = "X$p"; then
--      enable_shared=yes
--    fi
--  done
--  IFS="$ac_save_ifs"
--  ;;
--esac],
--enable_shared=AC_ENABLE_SHARED_DEFAULT)dnl
--])
--
--# AC_DISABLE_SHARED - set the default shared flag to --disable-shared
--AC_DEFUN([AC_DISABLE_SHARED], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
--AC_ENABLE_SHARED(no)])
--
--# AC_ENABLE_STATIC - implement the --enable-static flag
--# Usage: AC_ENABLE_STATIC[(DEFAULT)]
--#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
--#   `yes'.
--AC_DEFUN([AC_ENABLE_STATIC], [dnl
--define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
--AC_ARG_ENABLE(static,
--changequote(<<, >>)dnl
--<<  --enable-static[=PKGS]  build static libraries [default=>>AC_ENABLE_STATIC_DEFAULT],
--changequote([, ])dnl
--[p=${PACKAGE-default}
--case "$enableval" in
--yes) enable_static=yes ;;
--no) enable_static=no ;;
--*)
--  enable_static=no
--  # Look at the argument we got.  We use all the common list separators.
--  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
--  for pkg in $enableval; do
--    if test "X$pkg" = "X$p"; then
--      enable_static=yes
--    fi
--  done
--  IFS="$ac_save_ifs"
--  ;;
--esac],
--enable_static=AC_ENABLE_STATIC_DEFAULT)dnl
--])
--
--# AC_DISABLE_STATIC - set the default static flag to --disable-static
--AC_DEFUN([AC_DISABLE_STATIC], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
--AC_ENABLE_STATIC(no)])
--
--
--# AC_ENABLE_FAST_INSTALL - implement the --enable-fast-install flag
--# Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)]
--#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
--#   `yes'.
--AC_DEFUN([AC_ENABLE_FAST_INSTALL], [dnl
--define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
--AC_ARG_ENABLE(fast-install,
--changequote(<<, >>)dnl
--<<  --enable-fast-install[=PKGS]  optimize for fast installation [default=>>AC_ENABLE_FAST_INSTALL_DEFAULT],
--changequote([, ])dnl
--[p=${PACKAGE-default}
--case "$enableval" in
--yes) enable_fast_install=yes ;;
--no) enable_fast_install=no ;;
--*)
--  enable_fast_install=no
--  # Look at the argument we got.  We use all the common list separators.
--  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
--  for pkg in $enableval; do
--    if test "X$pkg" = "X$p"; then
--      enable_fast_install=yes
--    fi
--  done
--  IFS="$ac_save_ifs"
--  ;;
--esac],
--enable_fast_install=AC_ENABLE_FAST_INSTALL_DEFAULT)dnl
--])
--
--# AC_ENABLE_FAST_INSTALL - set the default to --disable-fast-install
--AC_DEFUN([AC_DISABLE_FAST_INSTALL], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
--AC_ENABLE_FAST_INSTALL(no)])
--
--# AC_PROG_LD - find the path to the GNU or non-GNU linker
--AC_DEFUN([AC_PROG_LD],
--[AC_ARG_WITH(gnu-ld,
--[  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]],
--test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no)
--AC_REQUIRE([AC_PROG_CC])dnl
--AC_REQUIRE([AC_CANONICAL_HOST])dnl
--AC_REQUIRE([AC_CANONICAL_BUILD])dnl
--ac_prog=ld
--if test "$ac_cv_prog_gcc" = yes; then
--  # Check if gcc -print-prog-name=ld gives a path.
--  AC_MSG_CHECKING([for ld used by GCC])
--  ac_prog=`($CC -print-prog-name=ld) 2>&5`
--  case "$ac_prog" in
--    # Accept absolute paths.
--changequote(,)dnl
--    [\\/]* | [A-Za-z]:[\\/]*)
--      re_direlt='/[^/][^/]*/\.\./'
--changequote([,])dnl
--      # Canonicalize the path of ld
--      ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
--      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
--	ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
--      done
--      test -z "$LD" && LD="$ac_prog"
--      ;;
--  "")
--    # If it fails, then pretend we aren't using GCC.
--    ac_prog=ld
--    ;;
--  *)
--    # If it is relative, then search for the first ld in PATH.
--    with_gnu_ld=unknown
--    ;;
--  esac
--elif test "$with_gnu_ld" = yes; then
--  AC_MSG_CHECKING([for GNU ld])
--else
--  AC_MSG_CHECKING([for non-GNU ld])
--fi
--AC_CACHE_VAL(ac_cv_path_LD,
--[if test -z "$LD"; then
--  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
--  for ac_dir in $PATH; do
--    test -z "$ac_dir" && ac_dir=.
--    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
--      ac_cv_path_LD="$ac_dir/$ac_prog"
--      # Check to see if the program is GNU ld.  I'd rather use --version,
--      # but apparently some GNU ld's only accept -v.
--      # Break only if it was the GNU/non-GNU ld that we prefer.
--      if "$ac_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
--	test "$with_gnu_ld" != no && break
--      else
--	test "$with_gnu_ld" != yes && break
--      fi
--    fi
--  done
--  IFS="$ac_save_ifs"
--else
--  ac_cv_path_LD="$LD" # Let the user override the test with a path.
--fi])
--LD="$ac_cv_path_LD"
--if test -n "$LD"; then
--  AC_MSG_RESULT($LD)
--else
--  AC_MSG_RESULT(no)
--fi
--test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
--AC_SUBST(LD)
--AC_PROG_LD_GNU
--])
--
--AC_DEFUN([AC_PROG_LD_GNU],
--[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], ac_cv_prog_gnu_ld,
--[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
--if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
--  ac_cv_prog_gnu_ld=yes
--else
--  ac_cv_prog_gnu_ld=no
--fi])
--])
--
--# AC_PROG_NM - find the path to a BSD-compatible name lister
--AC_DEFUN([AC_PROG_NM],
--[AC_MSG_CHECKING([for BSD-compatible nm])
--AC_CACHE_VAL(ac_cv_path_NM,
--[if test -n "$NM"; then
--  # Let the user override the test.
--  ac_cv_path_NM="$NM"
--else
--  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
--  for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
--    test -z "$ac_dir" && ac_dir=.
--    if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext ; then
--      # Check to see if the nm accepts a BSD-compat flag.
--      # Adding the `sed 1q' prevents false positives on HP-UX, which says:
--      #   nm: unknown option "B" ignored
--      if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
--	ac_cv_path_NM="$ac_dir/nm -B"
--	break
--      elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
--	ac_cv_path_NM="$ac_dir/nm -p"
--	break
--      else
--	ac_cv_path_NM=${ac_cv_path_NM="$ac_dir/nm"} # keep the first match, but
--	continue # so that we can try to find one that supports BSD flags
--      fi
--    fi
--  done
--  IFS="$ac_save_ifs"
--  test -z "$ac_cv_path_NM" && ac_cv_path_NM=nm
--fi])
--NM="$ac_cv_path_NM"
--AC_MSG_RESULT([$NM])
--AC_SUBST(NM)
--])
--
--# AC_CHECK_LIBM - check for math library
--AC_DEFUN([AC_CHECK_LIBM],
--[AC_REQUIRE([AC_CANONICAL_HOST])dnl
--LIBM=
--case "$host" in
--*-*-beos* | *-*-cygwin*)
--  # These system don't have libm
--  ;;
--*-ncr-sysv4.3*)
--  AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
--  AC_CHECK_LIB(m, main, LIBM="$LIBM -lm")
--  ;;
--*)
--  AC_CHECK_LIB(m, main, LIBM="-lm")
--  ;;
--esac
--])
--
--# AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for
--# the libltdl convenience library, adds --enable-ltdl-convenience to
--# the configure arguments.  Note that LIBLTDL is not AC_SUBSTed, nor
--# is AC_CONFIG_SUBDIRS called.  If DIR is not provided, it is assumed
--# to be `${top_builddir}/libltdl'.  Make sure you start DIR with
--# '${top_builddir}/' (note the single quotes!) if your package is not
--# flat, and, if you're not using automake, define top_builddir as
--# appropriate in the Makefiles.
--AC_DEFUN([AC_LIBLTDL_CONVENIENCE], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
--  case "$enable_ltdl_convenience" in
--  no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
--  "") enable_ltdl_convenience=yes
--      ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
--  esac
--  LIBLTDL=ifelse($#,1,$1,['${top_builddir}/libltdl'])/libltdlc.la
--  INCLTDL=ifelse($#,1,-I$1,['-I${top_builddir}/libltdl'])
--])
--
--# AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for
--# the libltdl installable library, and adds --enable-ltdl-install to
--# the configure arguments.  Note that LIBLTDL is not AC_SUBSTed, nor
--# is AC_CONFIG_SUBDIRS called.  If DIR is not provided, it is assumed
--# to be `${top_builddir}/libltdl'.  Make sure you start DIR with
--# '${top_builddir}/' (note the single quotes!) if your package is not
--# flat, and, if you're not using automake, define top_builddir as
--# appropriate in the Makefiles.
--# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
--AC_DEFUN([AC_LIBLTDL_INSTALLABLE], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
--  AC_CHECK_LIB(ltdl, main,
--  [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
--  [if test x"$enable_ltdl_install" = xno; then
--     AC_MSG_WARN([libltdl not installed, but installation disabled])
--   else
--     enable_ltdl_install=yes
--   fi
--  ])
--  if test x"$enable_ltdl_install" = x"yes"; then
--    ac_configure_args="$ac_configure_args --enable-ltdl-install"
--    LIBLTDL=ifelse($#,1,$1,['${top_builddir}/libltdl'])/libltdl.la
--    INCLTDL=ifelse($#,1,-I$1,['-I${top_builddir}/libltdl'])
--  else
--    ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
--    LIBLTDL="-lltdl"
--    INCLTDL=
--  fi
--])
--
--dnl old names
--AC_DEFUN([AM_PROG_LIBTOOL], [indir([AC_PROG_LIBTOOL])])dnl
--AC_DEFUN([AM_ENABLE_SHARED], [indir([AC_ENABLE_SHARED], $@)])dnl
--AC_DEFUN([AM_ENABLE_STATIC], [indir([AC_ENABLE_STATIC], $@)])dnl
--AC_DEFUN([AM_DISABLE_SHARED], [indir([AC_DISABLE_SHARED], $@)])dnl
--AC_DEFUN([AM_DISABLE_STATIC], [indir([AC_DISABLE_STATIC], $@)])dnl
--AC_DEFUN([AM_PROG_LD], [indir([AC_PROG_LD])])dnl
--AC_DEFUN([AM_PROG_NM], [indir([AC_PROG_NM])])dnl
--
--dnl This is just to silence aclocal about the macro not being used
--ifelse([AC_DISABLE_FAST_INSTALL])dnl
---- tmp/base/ntop-3.0-r0/ntop-3.0/configure.in	2004-03-21 18:45:04.000000000 -0500
-+++ ntop-3.0/configure.in	2004-05-22 14:20:07.000000000 -0400
-@@ -190,7 +190,6 @@
- AC_PROG_INSTALL
- AC_PROG_LN_S
- AC_PROG_MAKE_SET
--AC_PROG_RANLIB
- 
- NTOPCONFIGDEBUG_SETTINGS([After ac stuff])
- 
-@@ -223,7 +222,6 @@
- AC_MSG_CHECKING([for libtool])
- AC_MSG_RESULT([])
- 
--dnl> Fix to: library used but `LIBTOOL' not defined in `configure.in'
- AC_PROG_LIBTOOL
- 
- dnl> Apple, just to be difficult, calls the gnu version glibtool...
-@@ -231,9 +229,6 @@
-     *-*-darwin*:* )
-         AC_CHECK_TOOL(LIBTOOL, glibtool)
-         ;;
--    * )
--        AC_CHECK_TOOL(LIBTOOL, libtool)
--        ;;
- esac
- 
- dnl> Test before we use it, below
-@@ -798,20 +793,22 @@
-               [  +----------------------------------------------------------------------------+])
- 
- 
--AC_MSG_CHECKING([for aclocal.m4])
--AC_CHECK_FILE(aclocal.m4, , [
--    echo ""
--    echo "Invoking aclocal to create aclocal.m4..."
--    $ACLOCAL
--    echo ""
--])
--AC_CHECK_FILE(depcomp, , [
--    echo ""
--    echo "depcomp missing... will install it in this ntop directory."
--    echo "  Invoking automake to copy depcomp..."
--    $AUTOMAKE --gnu --copy --add-missing
--    echo ""
--])
-+if test X"$cross_compiling" != Xyes; then
-+    AC_MSG_CHECKING([for aclocal.m4])
-+    AC_CHECK_FILE(aclocal.m4, , [
-+        echo ""
-+        echo "Invoking aclocal to create aclocal.m4..."
-+        $ACLOCAL
-+        echo ""
-+    ])
-+    AC_CHECK_FILE(depcomp, , [
-+        echo ""
-+        echo "depcomp missing... will install it in this ntop directory."
-+        echo "  Invoking automake to copy depcomp..."
-+        $AUTOMAKE --gnu --copy --add-missing
-+        echo ""
-+    ])
-+fi
- 
- dnl> Handle the root -> lib/include settings
- NTOP_SET_LIBINC(PCAP)
-@@ -2105,15 +2102,15 @@
- AC_STRUCT_TM
- AC_STRUCT_TIMEZONE 
- 
--AC_CHECK_TYPEDEF(u_int64_t, sys/types.h)
--AC_CHECK_TYPEDEF(uint64_t, sys/types.h)
--AC_CHECK_TYPEDEF(u_int32_t, sys/types.h)
--AC_CHECK_TYPEDEF(u_int16_t, sys/types.h)
--AC_CHECK_TYPEDEF(u_int8_t, sys/types.h)
--AC_CHECK_TYPEDEF(int64_t, sys/types.h)
--AC_CHECK_TYPEDEF(int32_t, sys/types.h)
--AC_CHECK_TYPEDEF(int16_t, sys/types.h)
--AC_CHECK_TYPEDEF(int8_t, sys/types.h)
-+AC_CHECK_TYPES([u_int64_t])
-+AC_CHECK_TYPES([uint64_t])
-+AC_CHECK_TYPES([u_int32_t])
-+AC_CHECK_TYPES([u_int16_t])
-+AC_CHECK_TYPES([u_int8_t])
-+AC_CHECK_TYPES([int64_t])
-+AC_CHECK_TYPES([int32_t])
-+AC_CHECK_TYPES([int16_t])
-+AC_CHECK_TYPES([int8_t])
- 
- dnl> If this fails, it could be a bad -l which is going to kill
- dnl> ALL the tests... so do the trivial compile test...
diff --git a/ntop/ntop-3.0/plugins.patch b/ntop/ntop-3.0/plugins.patch
deleted file mode 100644
index 5552fe1077..0000000000
--- a/ntop/ntop-3.0/plugins.patch
+++ /dev/null
@@ -1,20 +0,0 @@
-
-#
-# Patch managed by http://www.holgerschurig.de/patcher.html
-#
-
---- ntop-3.0/plugins/Makefile.am~plugins
-+++ ntop-3.0/plugins/Makefile.am
-@@ -175,3 +175,12 @@
- 	@@AWK@ -f ../utils/xmldump.awk globals-structtypes.xml
- 
- .NOTPARALLEL:
-+icmpPlugin_so_SOURCES =
-+lastSeenPlugin_so_SOURCES =
-+netflowPlugin_so_SOURCES =
-+nfsPlugin_so_SOURCES =
-+pdaPlugin_so_SOURCES =
-+rrdPlugin_so_SOURCES =
-+sflowPlugin_so_SOURCES =
-+xmldumpPlugin_so_SOURCES =
-+rmonPlugin_so_SOURCES =
diff --git a/ntop/ntop_3.0.bb b/ntop/ntop_3.0.bb
deleted file mode 100644
index e69de29bb2..0000000000
--- a/ntop/ntop_3.0.bb
+++ /dev/null