summaryrefslogtreecommitdiff
path: root/conf
diff options
context:
space:
mode:
authorGerald Britton <gbritton@doomcom.org>2004-05-13 05:59:06 +0000
committerGerald Britton <gbritton@doomcom.org>2004-05-13 05:59:06 +0000
commit46b90c522ed51c1a985ad02039952dd8f9204196 (patch)
tree4cf2e4a896d1bfa833a4f53fbd4de48aa8ed7827 /conf
parent8e663d01881e204643bc2203c8afc3e394e8a131 (diff)
clean up local.conf.sample as if it were documentation or something.
BKrev: 40a30eaa6mR3f0bAhbDp6qHlkATVGg
Diffstat (limited to 'conf')
-rw-r--r--conf/local.conf.sample60
1 files changed, 44 insertions, 16 deletions
diff --git a/conf/local.conf.sample b/conf/local.conf.sample
index d3d1f6fbbe..ebd6682297 100644
--- a/conf/local.conf.sample
+++ b/conf/local.conf.sample
@@ -1,41 +1,65 @@
#
# OpenEmbedded local configuration file (sample)
#
+# Please visit the Wiki at http://openembedded.org/ for more info.
+#
+
+# Be SURE to read these comments and setup your build environment before
+# proceeding. Once you have done that, remove the line at the end of this
+# file and build away.
+
+# The recommended setup is to create a build directory, such as
+# ${HOME}/oe/build/ (you may want to put OE and the packages into your
+# ${HOME}/oe/oe/ and ${HOME}/oe/packages/ respectively too). Within your
+# build environment, you should copy this file into conf/local.conf, and
+# then EDIT IT. Fixup any paths to point to the correct locations, and
+# setup the target specifications appropriately.
+
+# Once you have done that, you will want to cd into your build environment
+# (${HOME}/oe/build/ in this example), then run "oemake targets..." This
+# will build into ${TMPDIR} which defaults to ${TOPDIR}/tmp (${TOPDIR} is
+# the current directory when oemake was executed).
# Use this to specify where OE should place the downloaded sources into
DL_DIR = "${HOME}/sources"
# Use this to specify what .oe files to consider for builds
-OEFILES = "*/*.oe"
+OEFILES = "/path/to/packages/*/*.oe"
-# Use the OEMASK below unless you want to build something else than the default glibc based setup
+# Use the OEMASK below unless you want to build something else than the
+# default glibc based setup
OEMASK = ""
-# Uncomment this if you want to use a prebuilt toolchain.
-# You will need to provide packages for toolchain and additional libraries yourself
-# You will definitly need to say ASSUME_PROVIDED = "virtual/arm-linux-gcc-2.95" to build any of two
-# Linux 2.4 Embedix kernels, i.e. openzaurus-sa-2.4.18 and openzaurus-pxa-2.4.18.
+# Uncomment this if you want to use a prebuilt toolchain. You will need to
+# provide packages for toolchain and additional libraries yourself You will
+# definitely need to say:
+# ASSUME_PROVIDED = "virtual/arm-linux-gcc-2.95"
+# to build any of two Linux 2.4 Embedix kernels,
+# i.e. openzaurus-sa-2.4.18 and openzaurus-pxa-2.4.18.
#ASSUME_PROVIDED = "virtual/${TARGET_PREFIX}gcc virtual/libc"
# Select between multiple alternative providers, if more than one is eligible.
-PREFERRED_PROVIDERS = "virtual/qte:qte-for-opie virtual/libqpe:libqpe-opie virtual/libsdl:libsdl-qpe"
+PREFERRED_PROVIDERS = "virtual/qte:qte-for-opie virtual/libqpe:libqpe-opie"
+PREFERRED_PROVIDERS += " virtual/libsdl:libsdl-qpe"
# Uncomment this to specify where OE should create its temporary files.
-# Note that a full build of everything in OE will take GigaBytes of hard disk space,
-# so make sure to free enough space. The default TMPDIR is <build directory>/tmp
+# Note that a full build of everything in OE will take GigaBytes of hard
+# disk space, so make sure to free enough space. The default TMPDIR is
+# <build directory>/tmp
#TMPDIR = /usr/local/projects/oetmp
-# Uncomment this to specify a machine to build for. See <oe>/conf/*.conf for machines
-# currently known to OpenEmbedded.
+# Uncomment this to specify a machine to build for. See <oe>/conf/*.conf
+# for machines currently known to OpenEmbedded.
#MACHINE = "collie"
-# Use this to specify the target architecture. Note that this is only needed when building
-# for a machine not known to OpenEmbedded. Better use the MACHINE attribute (see above)
+# Use this to specify the target architecture. Note that this is only
+# needed when building for a machine not known to OpenEmbedded. Better use
+# the MACHINE attribute (see above)
TARGET_ARCH = "arm"
-# Use this to specify the target operating system. This is "linux" for a normal
-# linux system with glibc. Set this to "linux-uclibc" if you want to build a
-# uclibc based system.
+# Use this to specify the target operating system. This is "linux" for a
+# normal linux system with glibc. Set this to "linux-uclibc" if you want
+# to build a uclibc based system.
#TARGET_OS = "linux"
#TARGET_OS = "linux-uclibc"
@@ -60,3 +84,7 @@ CACHE=/var/tmp/oe-cache.${USER}
# a cvs:// URI. Comment this out if you always want to pull directly
# from the CVS tree.
CVS_TARBALL_STASH = "http://www.treke.net/oe/source/"
+
+# EDIT THIS FILE and then remove the line below before using
+REMOVE_THIS_LINE:="${@oe.fatal('Read the comments in your conf/local.conf')}"
+