diff options
| -rw-r--r-- | io-module/mths.c | 232 | ||||
| -rw-r--r-- | io-module/mts-io.c | 6 | ||||
| -rw-r--r-- | io-module/mts_io_module.h | 6 |
3 files changed, 242 insertions, 2 deletions
diff --git a/io-module/mths.c b/io-module/mths.c index 739a9a0..a51380c 100644 --- a/io-module/mths.c +++ b/io-module/mths.c @@ -255,6 +255,237 @@ static struct gpio_pin gpio_pins_mths_0_0[] = { { }, }; +/* MTHS-0.1 has no WIFI LED */ +static struct gpio_pin gpio_pins_mths_0_1[] = { + { + .name = "RADIO_POWER_MONITOR", + .pin = { + .gpio = AT91_PIN_PA23, + .flags = GPIOF_IN, + .label = "radio-power-monitor", + }, + .active_low = 0, + }, + { + .name = "RADIO_RESET", + .pin = { + .gpio = AT91_PIN_PA22, + .flags = GPIOF_OUT_INIT_HIGH | GPIOF_OPEN_DRAIN, + .label = "radio-reset", + }, + .active_low = 0, + }, + { + .name = "RADIO_POWER", + .pin = { + .gpio = AT91_PIN_PA21, + .flags = GPIOF_OUT_INIT_HIGH | GPIOF_OPEN_DRAIN, + .label = "radio-power", + }, + .active_low = 0, + }, + { + .name = "DEVICE_RESET", + .pin = { + .gpio = AT91_PIN_PC4, + .flags = GPIOF_IN, + .label = "reset", + }, + .active_low = 1, + }, + { + .name = "WPS_BUTTON", + .pin = { + .gpio = AT91_PIN_PA13, + .flags = GPIOF_IN, + .label = "wps_button", + }, + .active_low = 1, + }, + { + .name = "BT_BUTTON", + .pin = { + //TODO return back .gpio = AT91_PIN_PC4, + .gpio = AT91_PIN_PA12, + .flags = GPIOF_IN, + .label = "bt_button", + }, + .active_low = 1, + }, + { + .name = "LS_LED", + .pin = { + .gpio = AT91_PIN_PC16, +#if LED_LS_CONTROLLABLE + .flags = GPIOF_OUT_INIT_HIGH, +#else + .flags = GPIOF_IN, +#endif + .label = "led-ls", + }, + .active_low = 1, + }, + { + .name = "LED4", + .pin = { + .gpio = AT91_PIN_PC20, + .flags = GPIOF_OUT_INIT_HIGH, + .label = "led-bt", + }, + .active_low = 1, + }, + { + .name = "LED4", + .pin = { + .gpio = AT91_PIN_PC20, + .flags = GPIOF_OUT_INIT_HIGH, + .label = "led-c", + }, + .active_low = 1, + }, + { + .name = "LED5", + .pin = { + .gpio = AT91_PIN_PC21, + .flags = GPIOF_OUT_INIT_HIGH, + .label = "led-status", + }, + .active_low = 1, + }, + { + .name = "LED5", + .pin = { + .gpio = AT91_PIN_PC21, + .flags = GPIOF_OUT_INIT_HIGH, + .label = "led-cd", + }, + .active_low = 1, + }, + { + .name = "LED6", + .pin = { + .gpio = AT91_PIN_PC19, + .flags = GPIOF_OUT_INIT_HIGH, + .label = "led-sig3", + }, + .active_low = 1, + }, + { + .name = "LED6", + .pin = { + .gpio = AT91_PIN_PC19, + .flags = GPIOF_OUT_INIT_HIGH, + .label = "led-d", + }, + .active_low = 1, + }, + { + .name = "LED7", + .pin = { + .gpio = AT91_PIN_PC18, + .flags = GPIOF_OUT_INIT_HIGH, + .label = "led-sig2", + }, + .active_low = 1, + }, + { + .name = "LED7", + .pin = { + .gpio = AT91_PIN_PC18, + .flags = GPIOF_OUT_INIT_HIGH, + .label = "led-e", + }, + .active_low = 1, + }, + { + .name = "LED8", + .pin = { + .gpio = AT91_PIN_PC17, + .flags = GPIOF_OUT_INIT_HIGH, + .label = "led-sig1", + }, + .active_low = 1, + }, + { + .name = "LED8", + .pin = { + .gpio = AT91_PIN_PC17, + .flags = GPIOF_OUT_INIT_HIGH, + .label = "led-f", + }, + .active_low = 1, + }, + + // The difference between MTRv1_0_0 and MTRv1_0_1 starts here + { + .name = "WIFI_BT_ULPWKUP", + .pin = { + .gpio = AT91_PIN_PB9, + .flags = GPIOF_IN, + .label = "wifi-bt-ulpwkup", + } + }, + { + .name = "WIFI_BT_LPWKUP", + .pin = { + .gpio = AT91_PIN_PB11, + .flags = GPIOF_IN, + .label = "wifi-bt-lpwkup", + } + }, + { + .name = "WIFI_BT_INT", + .pin = { + .gpio = AT91_PIN_PB13, + .flags = GPIOF_IN, + .label = "wifi-bt-int", + } + }, + { + .name = "WIFI_BT_RESET", + .pin = { + .gpio = AT91_PIN_PB10, + .flags = GPIOF_OUT_INIT_HIGH, + .label = "wifi-bt-reset", + } + }, + { + .name = "WIFI_BT_LPMODE", + .pin = { + .gpio = AT91_PIN_PB12, + .flags = GPIOF_IN, + .label = "wifi-bt-lpmode", + } + }, + { + .name = "GNSS_RESET", + .pin = { + .gpio = AT91_PIN_PC6, + .flags = GPIOF_OUT_INIT_HIGH, + .label = "gnss-reset", + } + }, + { + .name = "USBHUB_RESET", + .pin = { + .gpio = AT91_PIN_PB6, + .flags = GPIOF_OUT_INIT_HIGH, + .label = "usbhub-reset", + } + }, + { + .name = "GNSS_INT", + .pin = { + .gpio = AT91_PIN_PC7, + .flags = GPIOF_OUT_INIT_HIGH, + .label = "gnss-int", + } + }, + + + { }, +}; + button_info_t mths_wps_button = { .name = "User Push Button WPS", .label_pin = "wps_button", @@ -287,6 +518,7 @@ button_info_t mths_bt_button = { .long_interval = BUTTON_LONG_HOLD_COUNT, }; +/* MTHS 0.0 and 0.1 have same buttons. */ static button_info_pt mths_buttons_0_0[] = { &reset_button, &mths_wps_button, diff --git a/io-module/mts-io.c b/io-module/mts-io.c index 0ea7e45..5e557fd 100644 --- a/io-module/mts-io.c +++ b/io-module/mts-io.c @@ -715,6 +715,12 @@ mts_id_eeprom_load(void) set_buttons(mths_buttons_0_0); mts_hw_version = MTHS_0_0; log_info("detected board %s", HW_VERSION_MTHS_0_0); + } else if (strncmp(id_eeprom.hw_version, HW_VERSION_MTHS_0_1, strlen(HW_VERSION_MTHS_0_1)) == 0) { + attr_group = &mths_0_0_platform_attribute_group; + gpio_pins = gpio_pins_mths_0_1; + set_buttons(mths_buttons_0_0); /* Only one button version */ + mts_hw_version = MTHS_0_1; + log_info("detected board %s", HW_VERSION_MTHS_0_1); } else if (((tmp=HW_VERSION_MTCDT_0_1),strncmp(id_eeprom.hw_version, tmp, strlen(tmp)) == 0) || ((tmp=HW_VERSION_MTCDTIP_0_0),strncmp(id_eeprom.hw_version, tmp, strlen(tmp)) == 0)) { current_blength = attr_blength = sizeof mtcdt_0_1_platform_attributes; diff --git a/io-module/mts_io_module.h b/io-module/mts_io_module.h index 3d0240f..41a27e5 100644 --- a/io-module/mts_io_module.h +++ b/io-module/mts_io_module.h @@ -5,7 +5,7 @@ * MTAC cards. */ -#define DRIVER_VERSION "v4.1.2" +#define DRIVER_VERSION "v4.1.3" #define DRIVER_AUTHOR "James Maki <jmaki@multitech.com>" #define DRIVER_DESC "MTS-IO Controller" #define DRIVER_NAME "mts-io" @@ -38,6 +38,7 @@ #define HW_VERSION_MTCAP_0_0 "MTCAP-0.0" #define HW_VERSION_MTCAP_0_1 "MTCAP-0.1" #define HW_VERSION_MTHS_0_0 "MTHS-0.0" +#define HW_VERSION_MTHS_0_1 "MTHS-0.1" enum { MTCDP_E1_DK_0_0, @@ -54,7 +55,8 @@ enum { MTCDTIPHP_0_0, MTCAP_0_0, MTCAP_0_1, - MTHS_0_0, + MTHS_0_0, + MTHS_0_1, }; enum { |