summaryrefslogtreecommitdiff
path: root/recipes-kernel
AgeCommit message (Expand)AuthorFiles
2019-05-09Bump the version of rs9113rfJohn Klug1
2019-05-09Add device type to signal stop.John Klug1
2019-05-08Bump revision of rs9113rf to fix antenna portJohn Klug1
2019-05-08Wrong antenna portJohn Klug1
2019-05-07Bump the revision of the kernel for new device treeJohn Klug1
2019-05-07Remove unused mmc pins, and put in PD14-PD20 in mtrv1John Klug1
2019-05-07rs9113 1.6.1 requires a base_interface name for the transmit commandJohn Klug3
2019-04-24Use output-high for MTCDT PD14-PD19 resetsJohn Klug1
2019-04-24Autoload i2c-dev for LoRa usersJohn Klug1
2019-04-17Use Redpine bridge patchJohn Klug2
2019-04-17Use Redpine bridge patchJohn Klug2
2019-04-15Remove unused mmc1-boardJohn Klug1
2019-04-05Syntax error in device treeJohn Klug1
2019-04-05Missing semicolon in device tree.John Klug1
2019-04-05Typo in name of patch for led brightnessJohn Klug1
2019-04-04Fix LED status on upgrade.John Klug2
2019-04-04Correct the SDIO active pin to PA1, and set deglitchJohn Klug1
2019-03-27Blink LEDs when kernel loads, not when modules loadJohn Klug2
2019-03-25Bump the version of rs9113 for new firmware and WEP fix.John Klug2
2019-03-22Bump kernel revision for CGROUPSJohn Klug1
2019-03-21Remove BLK_CGROUP and add PROC_EVENTS, and take the consequences from make me...John Klug1
2019-03-21Make defconfig compatible with make menuconfig again.John Klug1
2019-03-19rs9113-autostart depends on rs9113-noarchJohn Klug1
2019-03-19rs9113 startup moved to package rs9113-autostartJohn Klug3
2019-03-18rs9113 package arch updates (all, arm926ejste)John Klug1
2019-03-08Bump the version of rs9113 package to correspond to driver patchJohn Klug2
2019-03-04All LTE MTR types can user B18 as the PPS signalJohn Klug1
2019-03-04Change pps to pps-0 in device tree to allow for multiple entries.John Klug1
2019-03-01Add rising edge IRQ to Murata - this is required for proper interruptMike Nicholson1
2019-03-01Use timing from previous software iterations.Mike Nicholson1
2019-02-27Enable/disable murata in wl12xx SDIO driver; deglitch, remove pull-downMike Nicholson3
2019-02-26Security enhancement (ASLR) : Disable CONFIG_COMPAT_BRK so that randomize_va_...Jeff Hatch1
2019-02-22Make it clear why there are two PPS pins definedJohn Klug1
2019-02-22Add PPS for MTRV1-0.0 and MTRV1-0.1John Klug1
2019-02-22Add the DT Overlay patch to kernel for MTRV1John Klug1
2019-02-18Allow CONFIG to be set externally.John Klug1
2019-02-15Add DMA to dbgu (not on uart0)Mike Nicholson1
2019-02-15Remove bt_transmit from the rs9113-utils file list, since it is not there any...John Klug1
2019-02-14Remove wpa_supplicant init script from rs9113-noarch, and simplify recipe.John Klug3
2019-02-14Add a couple jiffies of slack in the PMECCERRLOCMike Nicholson2
2019-02-13DMA for dbgu on MTCDT, and MTCAP (MTCAP requires testing)Mike Nicholson2
2019-02-13Split off seldom used rs9113 driver filesJohn Klug3
2019-02-12New rs9113 driver for Linux versions up to 4.14John Klug2
2019-02-07Enable DMA on dbgu serial (fixes overrun issue)Mike Nicholson1
2019-02-07Add DMA to uart0, delete m25p80Mike Nicholson1
2019-02-07Add mts-io/John's radio reset, remove m25p80, remove 16-bit nand, streamline ...Mike Nicholson1
2019-02-06Use DMA for Venus on gps0/ttyS1, get Venus workingMike Nicholson1
2019-02-05Remove perl dependencyJohn Klug3
2019-02-05Pull down for radio monitor on mtrv1John Klug1
2019-02-01Original MTR, initial revisionMike3
generated by cgit v1.2.3 (git 2.25.1) at 2024-06-09 06:00:23 +0000