meta-multitech-atmel.git - MultiTech BSP Layer for Atmel processors

Age	Commit message (Expand)	Author	Files
2019-05-10	Everything being done from dtoverlay can be done with bash and existing comma...	John Klug	2
2019-05-10	Move mtac to the meta-multitech repository	John Klug	1
2019-05-10	Switch to mtac-gpiob 1.1.2 on multitech.net	John Klug	1
2019-05-10	Move mts-io to multitech.net	John Klug	1
2019-05-09	Bump the version of rs9113rf	John Klug	1
2019-05-09	Add device type to signal stop.	John Klug	1
2019-05-08	Bump revision of rs9113rf to fix antenna port	John Klug	1
2019-05-08	Wrong antenna port	John Klug	1
2019-05-07	Bump the revision of the kernel for new device tree	John Klug	1
2019-05-07	Remove unused mmc pins, and put in PD14-PD20 in mtrv1	John Klug	1
2019-05-07	rs9113 1.6.1 requires a base_interface name for the transmit command	John Klug	3
2019-04-24	Blacklist mts-io driver so it is not loaded by device tree.	John Klug	2
2019-04-24	Use output-high for MTCDT PD14-PD19 resets	John Klug	1
2019-04-24	Autoload i2c-dev for LoRa users	John Klug	2
2019-04-17	Use Redpine bridge patch	John Klug	2
2019-04-17	Use Redpine bridge patch	John Klug	2
2019-04-16	New bootstrap 3.8.12 with ONFI	John Klug	4
2019-04-16	Move bootstrap to ONFI compatible 3.8.12	John Klug	23
2019-04-15	Reduce the activity on the WIFI-BT RESET (PD14) during at91bootstrap	John Klug	2
2019-04-15	Remove unused mmc1-board	John Klug	1
2019-04-15	Remove garbage from mtcdt bootstrap patch	John Klug	1
2019-04-15	Disable USB, which otherwise will use pins PD18-PD20	John Klug	2
2019-04-05	Syntax error in device tree	John Klug	1
2019-04-05	Missing semicolon in device tree.	John Klug	1
2019-04-05	Typo in name of patch for led brightness	John Klug	3
2019-04-04	Bump the at91bootstrap revision	John Klug	1
2019-04-04	Pin High GPIO pins that overlap with PIOB	John Klug	1
2019-04-04	Pin High GPIO pins that overlap with PIOB	John Klug	1
2019-04-04	Fix LED status on upgrade.	John Klug	2
2019-04-04	Correct the SDIO active pin to PA1, and set deglitch	John Klug	1
2019-03-27	Blink LEDs when kernel loads, not when modules load	John Klug	2
2019-03-25	Bump the version of rs9113 for new firmware and WEP fix.	John Klug	2
2019-03-22	Bump kernel revision for CGROUPS	John Klug	1
2019-03-21	Remove BLK_CGROUP and add PROC_EVENTS, and take the consequences from make me...	John Klug	1
2019-03-21	Make defconfig compatible with make menuconfig again.	John Klug	1
2019-03-19	rs9113-autostart depends on rs9113-noarch	John Klug	1
2019-03-19	rs9113 startup moved to package rs9113-autostart	John Klug	3
2019-03-18	rs9113 package arch updates (all, arm926ejste)	John Klug	1
2019-03-08	Bump the version of rs9113 package to correspond to driver patch	John Klug	2
2019-03-04	Create routine in mts-io init script to load device tree.	John Klug	1
2019-03-04	mt-dt-overlay to test overlays	John Klug	2
2019-03-04	All LTE MTR types can user B18 as the PPS signal	John Klug	1
2019-03-04	Change pps to pps-0 in device tree to allow for multiple entries.	John Klug	1
2019-03-01	Add rising edge IRQ to Murata - this is required for proper interrupt	Mike Nicholson	1
2019-03-01	Use timing from previous software iterations.	Mike Nicholson	1
2019-02-28	Use latest firmware	John Klug	4
2019-02-27	Bump mts-io revision for new file /var/run/config/gpstype	John Klug	1
2019-02-27	Add new file /var/run/config/gpstype	John Klug	1
2019-02-27	Enable/disable murata in wl12xx SDIO driver; deglitch, remove pull-down	Mike Nicholson	3
2019-02-27	mLinux wl12xx functionality will be minimal, for testing and calibration only	John Klug	3