meta-multitech-atmel.git - MultiTech BSP Layer for Atmel processors

Age	Commit message (Expand)	Author	Files
2021-11-18	Have the Atmel serial driver pick the dma channel	John Klug	1
2021-11-18	ttyS4, external serial port, must be by default disabled	John Klug	1
2021-11-18	Fix DMA for external serial port on MTRV1-0.4	John Klug	1
2021-09-10	Add DMA to GNSS and External Serial	John Klug	1
2021-09-07	Fix device tree for MTRV1-0.4 and bump kernel version	John Klug	1
2020-06-23	add user data partition	Serhii Voloshynov	1
2019-05-28	Remove vbus-gpio which breaks the USB interface.	John Klug	1
2019-05-24	Set output low on the GNSS-RESET line	John Klug	1
2019-05-07	Remove unused mmc pins, and put in PD14-PD20 in mtrv1	John Klug	1
2019-03-04	All LTE MTR types can user B18 as the PPS signal	John Klug	1
2019-02-22	Make it clear why there are two PPS pins defined	John Klug	1
2019-02-22	Add PPS for MTRV1-0.0 and MTRV1-0.1	John Klug	1
2019-02-07	Enable DMA on dbgu serial (fixes overrun issue)	Mike Nicholson	1
2019-02-07	Add DMA to uart0, delete m25p80	Mike Nicholson	1
2019-02-05	Pull down for radio monitor on mtrv1	John Klug	1
2019-01-24	dma hangs GPS port.	John Klug	2
2019-01-18	Add *.inc files with modules to autoload on boot.	John Klug	1
2019-01-16	Add pre-emption, required by MTCDT	John Klug	1
2019-01-15	Devices to the end of defconfig. Missing CONFIG_HWMON	John Klug	1
2019-01-11	Hopefully correct up to Device Drivers, Generic Driver Options. TBD reset of...	John Klug	1
2019-01-10	Add bluetooth support to mtrv1 and mtcdt	John Klug	1
2019-01-08	Enable Option driver support for Telit, et al.	Mike Nicholson	1
2019-01-07	Add pull-up patch for MTRv1 radio power / reset	Mike Nicholson	1
2019-01-04	Rename the kernel to be compatible with existing recipes (and shorter)	John Klug	2