summaryrefslogtreecommitdiff
path: root/recipes-kernel/linux
AgeCommit message (Expand)AuthorFiles
2023-02-13 MTCDT : Silent Mode is ON, but there are many entries in the debug console d...Serhii Voloshynov6
2022-11-16MTCDT SD image: Configure Linux to boot from the SD-cardSerhii Kostiuk1
2022-09-27Add 5.4.199 kernel bitbake recipeJohn Klug1
2022-09-27Add 5.5.199 kernel filesJohn Klug30
2022-05-26Remove patch debug codeJohn Klug1
2022-05-24Restore 5.4.81 kernelJohn Klug28
2022-05-24Update recipes to build linux-at91-5.4.195John Klug3
2022-05-24New Linux4SAM LinuxAT91 5.4.195John Klug28
2022-03-24Remove bad block table introduced with GPIOD MTCDT changeJohn Klug1
2022-03-23github no longer accepts clear git protocol so switch to httpsJohn Klug2
2022-03-10Kernel image install from ipkJohn Klug1
2022-02-24output-high, output-low is ignored by Atmel pinctrl driverJohn Klug1
2022-02-22Map device tree nand@0 to /dev/mtd0John Klug1
2022-02-17Move device tree overlay warning to debug statusJohn Klug1
2022-02-17Compatibility fix for new mts-io driver 4.9.0John Klug5
2022-02-155.3.x MTCDT device tree with name-gpio/connection-id for mts-io driversharma-mts3
2022-01-14fix MTR and MTCAP buildsSerhii Voloshynov1
2022-01-14Merge branch 'vs/mtx-4338' into '6' Jeff Hatch8
2022-01-11Disable EHCI (High Speed USB) by default for MTCDT Set EHCI (High Speed USB)...Serhii Voloshynov1
2022-01-11Set EHCI (High Speed USB) by default for MTCDTJohn Klug1
2022-01-11Disable EHCI (High Speed USB) by default for MTCDTJohn Klug1
2022-01-11cd-gpio is on pioA 1 (or gpio0 pin 1)John Klug1
2022-01-11Enable XMIT and RCV in all cases when setting RS485 with Atmel serial - adapt...Serhii Voloshynov1
2022-01-11Enable XMIT and RCV in all cases when setting RS485 with Atmel serialJohn Klug1
2022-01-11Disable CRTSCTS when setting RS485 half duplex to match Vizzini driver - adap...Serhii Voloshynov2
2022-01-11Disable CRTSCTS when setting RS485 half duplex to match Vizzini driverJohn Klug2
2022-01-11Remove i2c debug to prevent new I/O expander debug - kernel 5.4Serhii Voloshynov1
2022-01-11Remove i2c debug to prevent new I/O expander debugJohn Klug1
2022-01-11Fix pincontrol for io controllers, rs9113, usbhub resets - migrate changes fo...Serhii Voloshynov1
2022-01-11Fix pincontrol for io controllers, rs9113, usbhub resetsSerhii Voloshynov2
2022-01-07Added gpio export by namesharma-mts2
2021-11-30Update mtcdt.dts for MTCDT-0.2Andrii Pientsov3
2021-11-22Reserve 5 bit serial for multidrop in Atmel Serial driver. Kernel 5.4.81Andrii Pientsov2
2021-11-22Add PCA953X driver to kernel 5.4.81 for MTCDT-0.2Andrii Pientsov1
2021-11-18Remove support for IRQ because our I/O expander does not have thisJohn Klug1
2021-11-18Cannot use same stanza names at at91sam9x5cm.dtsi or partition order is incor...John Klug1
2021-11-18Device tree updates for MTCDT-0.2 and OverlayJohn Klug4
2021-11-18output-high and output-low are ignored by pinctrl_at91 driverJohn Klug1
2021-11-18Add patch for multidrop serial to match Vizzini driverJohn Klug1
2021-11-18Add dummy regulator to make gpio expander driver happyJohn Klug1
2021-11-18Call the new PCA9557 parts gpio4 and gpio5John Klug1
2021-11-18Print a message to the log when setting multidropJohn Klug1
2021-11-18r15 kernel was not yet released, so use r15John Klug1
2021-11-18Reserve 5 bit serial for multidrop in Atmel Serial driverJohn Klug2
2021-11-18Add new GPIO expanderJohn Klug1
2021-11-18Add PCA953X driver to kernel for MTCDT-0.2John Klug1
2021-11-18Have the Atmel serial driver pick the dma channelJohn Klug1
2021-11-18ttyS4, external serial port, must be by default disabledJohn Klug1
2021-11-18Fix DMA for external serial port on MTRV1-0.4John Klug2
2021-11-04Bug fix: softdog was already in linux-at91 recipe for mtcdtHarsh Sharma1
generated by cgit v1.2.3 (git 2.25.1) at 2024-04-28 21:21:02 +0000