1 files changed, 0 insertions, 102 deletions
diff --git a/recipes-bsp/at91bootstrap/at91bootstrap-3.5.3/at91bootstrap-3.5.3-mtr.patch b/recipes-bsp/at91bootstrap/at91bootstrap-3.5.3/at91bootstrap-3.5.3-mtr.patch
deleted file mode 100644
index 0a7600d..0000000
--- a/recipes-bsp/at91bootstrap/at91bootstrap-3.5.3/at91bootstrap-3.5.3-mtr.patch
+++ /dev/null
@@ -1,102 +0,0 @@
-Index: at91bootstrap-3.5.3/board/at91sam9x5ek/at91sam9x5eknf_uboot_defconfig
-===================================================================
---- at91bootstrap-3.5.3.orig/board/at91sam9x5ek/at91sam9x5eknf_uboot_defconfig	2013-04-11 05:07:35.000000000 -0500
-+++ at91bootstrap-3.5.3/board/at91sam9x5ek/at91sam9x5eknf_uboot_defconfig	2013-04-29 15:13:01.390913836 -0500
-@@ -42,7 +42,8 @@
- ALLOW_PIO3=y
- CONFIG_HAS_PIO3=y
- CPU_HAS_PMECC=y
--CONFIG_LOAD_ONE_WIRE=y
-+# MTS: don't load one wire
-+# CONFIG_LOAD_ONE_WIRE is not set
- # CONFIG_MMC_SUPPORT is not set
- 
- #
-@@ -81,8 +82,8 @@
- #
- # PMECC Configuration
- #
--CONFIG_PMECC_CORRECT_BITS_2=y
--# CONFIG_PMECC_CORRECT_BITS_4 is not set
-+# CONFIG_PMECC_CORRECT_BITS_2 is not set
-+CONFIG_PMECC_CORRECT_BITS_4=y
- # CONFIG_PMECC_CORRECT_BITS_8 is not set
- # CONFIG_PMECC_CORRECT_BITS_12 is not set
- # CONFIG_PMECC_CORRECT_BITS_24 is not set
-@@ -116,4 +117,5 @@
- # CONFIG_USER_HW_INIT is not set
- CONFIG_THUMB=y
- CONFIG_SCLK=y
--CONFIG_DISABLE_WATCHDOG=y
-+# MTS: don't disable watchdog
-+# CONFIG_DISABLE_WATCHDOG is not set
-Index: at91bootstrap-3.5.3/board/at91sam9x5ek/at91sam9x5ek.c
-===================================================================
---- at91bootstrap-3.5.3.orig/board/at91sam9x5ek/at91sam9x5ek.c	2019-04-04 15:49:54.143358228 -0500
-+++ at91bootstrap-3.5.3/board/at91sam9x5ek/at91sam9x5ek.c	2019-04-04 17:31:57.691176941 -0500
-@@ -53,6 +53,31 @@
- extern void hw_init_hook(void);
- #endif
- 
-+
-+static void initialize_mt_gpio(void)
-+{
-+ 	/* Configure DBGU pins */
-+	const struct pio_desc mt_gpio_pins[] = {
-+		/* Misc. pins -- Pins PD15-PD18 belong to PERIPH
-+		 * B A20-A25 until bootstrap shuts them down.
-+                 * This code prevents these pins from being used
-+                 * during boot, since we do not
-+                 * need these pins to boot the system and we
-+                 * do not want resets to toggle needlessly.
-+		 */
-+		{"GNSS-RESET",AT91C_PIN_PD(15), 1, PIO_PULLUP, PIO_OUTPUT},
-+		{"SECURE-RESET",AT91C_PIN_PD(16), 1, PIO_PULLUP, PIO_OUTPUT},
-+		{"MTQ-RESET",AT91C_PIN_PD(17), 1, PIO_PULLUP, PIO_OUTPUT},
-+		{"USBHUB-RESET",AT91C_PIN_PD(18), 1, PIO_PULLUP, PIO_OUTPUT},
-+		{"GNSS-INT",AT91C_PIN_PD(19), 1, PIO_PULLUP, PIO_OUTPUT},
-+		{"WIFI-BT-LPMODE",AT91C_PIN_PD(20), 0, PIO_PULLUP, PIO_INPUT},
-+		{(char *)0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
-+        };
-+
-+	pio_configure(mt_gpio_pins);
-+}
-+
-+
- static void at91_dbgu_hw_init(void)
- {
- 	/* Configure DBGU pins */
-@@ -198,6 +223,9 @@
- 	slowclk_enable_osc32();
- #endif
- 
-+        /* Initialize MT GPIO */
-+        initialize_mt_gpio();
-+
- 	/* Initialize dbgu */
- 	initialize_dbgu();
- 
-@@ -322,10 +350,8 @@
- 
- 	reg = readl(AT91C_BASE_CCFG + CCFG_EBICSA);
- 	reg |= AT91C_EBI_CS3A_SM;
--	if (get_cm_rev() == 'A')
--		reg &= ~AT91C_EBI_NFD0_ON_D16;
--	else
--		reg |= (AT91C_EBI_DDR_MP_EN | AT91C_EBI_NFD0_ON_D16);
-+	/* MTR */
-+	reg |= (AT91C_EBI_DDR_MP_EN | AT91C_EBI_NFD0_ON_D16);
- 
- 	reg &= ~AT91C_EBI_DRV;
- 	writel(reg, AT91C_BASE_CCFG + CCFG_EBICSA);
-@@ -355,9 +381,7 @@
- 		AT91C_BASE_SMC + SMC_CTRL3);
- 
- 	/* Configure the PIO controller */
--	if (get_cm_rev() == 'A')
--		pio_configure(nand_pins_lo);
--	else
-+	/* MTR2 */
- 		pio_configure(nand_pins_hi);
- 
- 	writel((1 << AT91C_ID_PIOC_D), (PMC_PCER + AT91C_BASE_PMC));