meta-mlinux.git - mLinux Distribution Layer

Age	Commit message (Expand)	Author	Files
2023-04-26	gpsd_settime changed to use GNU date	John Klug	1
2021-11-17	Fix typo in GPS_LINE variable	John Klug	1
2021-11-17	Document U-Blox with ACM driver	John Klug	1
2021-11-17	3.20-m8b GPSD for U-Blox via USB	John Klug	1
2021-09-13	Remove gpsd warnings	John Klug	1
2021-05-07	Fix problems initializing U-Blox GPS	John Klug	1
2021-03-26	Shutdown hangs when the EEPROM is not written yet because of no GPS device	John Klug	1
2021-03-02	Remove extra LNA setting for MTHS	John Klug	1
2021-03-02	Reset U-Blox serial port when resetting the U-Blox	John Klug	1
2021-02-15	add waiting of /dev/gps0	Serhii Voloshynov	1
2021-02-11	[MTX-3858] Conduit 300: GPS issue on one of the MTCDT3AC unit - no data from ...	Serhii Voloshynov	1
2021-01-25	If gpsctl is successful the first time, quit	John Klug	1
2021-01-14	Make baud rate setting reliable, and save gpsd reboot test	John Klug	1
2020-01-02	gpsd takes too long to quit when there is no antenna signal	John Klug	1
2019-12-20	Correct new gpsd_settime script in case status is missing from gpspipe output	John Klug	1
2019-05-22	Add MTHS u-blox initialization to mLinux 5	John Klug	1
2019-05-03	Copy gpsd-3.16 from mLinux 4.1.9 for better gps initialization	John Klug	2
2019-04-01	Errors are due to wrong speed on EXAR TTY, which can happen with a no reset r...	John Klug	1
2019-03-18	Fix cold boot issue with vizzini driver and gpsd	John Klug	1
2019-03-15	Make gpsd recipe independent of U-Blox and faster time setting with improved ...	John Klug	6
2019-03-14	Move U-Blox specific commands out of /etc/init.d/gpsd, and don't set baud rat...	John Klug	2
2019-02-28	gpsd CPU efficiencies for MTR	John Klug	2
2019-01-03	Use /dev/gps0 for all gps devices	John Klug	1
2018-03-22	pgrep does not work during boot causing gpsd_ubx_* commands to hang.	John Klug	2
2018-03-14	Remove gpsd reference to non-existent script in udev rules.	John Klug	1
2018-02-13	Fix stalled ntpd startup on certain systems	John Klug	2
2017-05-09	Allow a maximum of 20 seconds to set the baud rate. Normally this takes ten ...	John Klug	1
2017-05-05	Exit if there is no GPS capability	John Klug	1
2017-04-28	setserial not in factory image, and low latency is the default	John Klug	1
2017-01-23	Remove gpsd code that contradicts ITU leap second standard	John Klug	1
2017-01-20	Use flag ENABLED in /etc/default like other MTS services	John Klug	2
2017-01-19	Leap second fix for U-Blox message UBX_NAV_TIMELS	John Klug	1
2017-01-19	Remove excess usage from case statement	John Klug	1
2017-01-16	Remove unneeded GPS_NUM	John Klug	2
2017-01-16	Remove incorrect comment	John Klug	1
2017-01-16	Must exit if GPS not found on old conduit	John Klug	1
2017-01-16	Have udev create /dev/gps0	John Klug	1
2017-01-12	Fix bad option for logger	John Klug	1
2017-01-12	Add script to set the system clock directly from the GPS.	John Klug	1
2017-01-12	Do not change the baud rate if gpsd is already running	John Klug	1
2017-01-11	Add new parameters for evaluating GPS fix status.	John Klug	2
2017-01-10	Add status to gpsd init script	John Klug	1
2017-01-09	Add gps0 symlink and set baud rate	John Klug	2
2017-01-06	Add flag to start gpsd	John Klug	2
2016-12-21	Change priority of gpsd and add multitech GPS device to default.	John Klug	2
2016-12-20	Add gpsd -n option to get it to start immediately	John Klug	1
2016-12-15	Add nice value to GPSD	John Klug	1
2016-12-14	Add Conduit GPS devices to GPSD configuration	John Klug	1
2016-12-13	Add gpsd 3.14	John Klug	4
2016-12-13	GPSD 3.14 Bitbake recipe	John Klug	5