Move to 2.10 wpa_supplicant and hostapd

7 files changed, 1517 insertions, 2 deletions

diff --git a/recipes-connectivity/hostapd/files/defconfig b/recipes-connectivity/hostapd/files/defconfig
index cff9c01..3a447c6 100644
--- a/recipes-connectivity/hostapd/files/defconfig
+++ b/recipes-connectivity/hostapd/files/defconfig
@@ -146,5 +146,3 @@ CONFIG_IEEE80211AC=y
 # This can be used to reduce the size of the hostapd considerably if debugging
 # code is not needed.
 #CONFIG_NO_STDOUT_DEBUG=y
-
-CONFIG_WEP=y
diff --git a/recipes-connectivity/wpa-supplicant/wpa-supplicant/99_wpa_supplicant b/recipes-connectivity/wpa-supplicant/wpa-supplicant/99_wpa_supplicant
new file mode 100644
index 0000000..6ff4dd8
--- /dev/null
+++ b/recipes-connectivity/wpa-supplicant/wpa-supplicant/99_wpa_supplicant
@@ -0,0 +1 @@
+d root root 0700 /var/run/wpa_supplicant none
diff --git a/recipes-connectivity/wpa-supplicant/wpa-supplicant/defconfig b/recipes-connectivity/wpa-supplicant/wpa-supplicant/defconfig
new file mode 100644
index 0000000..b123e06
--- /dev/null
+++ b/recipes-connectivity/wpa-supplicant/wpa-supplicant/defconfig
@@ -0,0 +1,625 @@
+# Example wpa_supplicant build time configuration
+#
+# This file lists the configuration options that are used when building the
+# hostapd binary. All lines starting with # are ignored. Configuration option
+# lines must be commented out complete, if they are not to be included, i.e.,
+# just setting VARIABLE=n is not disabling that variable.
+#
+# This file is included in Makefile, so variables like CFLAGS and LIBS can also
+# be modified from here. In most cases, these lines should use += in order not
+# to override previous values of the variables.
+
+
+# Uncomment following two lines and fix the paths if you have installed OpenSSL
+# or GnuTLS in non-default location
+#CFLAGS += -I/usr/local/openssl/include
+#LIBS += -L/usr/local/openssl/lib
+
+# Some Red Hat versions seem to include kerberos header files from OpenSSL, but
+# the kerberos files are not in the default include path. Following line can be
+# used to fix build issues on such systems (krb5.h not found).
+#CFLAGS += -I/usr/include/kerberos
+
+# Example configuration for various cross-compilation platforms
+
+#### sveasoft (e.g., for Linksys WRT54G) ######################################
+#CC=mipsel-uclibc-gcc
+#CC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc
+#CFLAGS += -Os
+#CPPFLAGS += -I../src/include -I../../src/router/openssl/include
+#LIBS += -L/opt/brcm/hndtools-mipsel-uclibc-0.9.19/lib -lssl
+###############################################################################
+
+#### openwrt (e.g., for Linksys WRT54G) #######################################
+#CC=mipsel-uclibc-gcc
+#CC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc
+#CFLAGS += -Os
+#CPPFLAGS=-I../src/include -I../openssl-0.9.7d/include \
+#	-I../WRT54GS/release/src/include
+#LIBS = -lssl
+###############################################################################
+
+
+# Driver interface for Host AP driver
+CONFIG_DRIVER_HOSTAP=y
+
+# Driver interface for Agere driver
+#CONFIG_DRIVER_HERMES=y
+# Change include directories to match with the local setup
+#CFLAGS += -I../../hcf -I../../include -I../../include/hcf
+#CFLAGS += -I../../include/wireless
+
+# Driver interface for madwifi driver
+# Deprecated; use CONFIG_DRIVER_WEXT=y instead.
+#CONFIG_DRIVER_MADWIFI=y
+# Set include directory to the madwifi source tree
+#CFLAGS += -I../../madwifi
+
+# Driver interface for ndiswrapper
+# Deprecated; use CONFIG_DRIVER_WEXT=y instead.
+#CONFIG_DRIVER_NDISWRAPPER=y
+
+# Driver interface for Atmel driver
+# CONFIG_DRIVER_ATMEL=y
+
+# Driver interface for old Broadcom driver
+# Please note that the newer Broadcom driver ("hybrid Linux driver") supports
+# Linux wireless extensions and does not need (or even work) with the old
+# driver wrapper. Use CONFIG_DRIVER_WEXT=y with that driver.
+#CONFIG_DRIVER_BROADCOM=y
+# Example path for wlioctl.h; change to match your configuration
+#CFLAGS += -I/opt/WRT54GS/release/src/include
+
+# Driver interface for Intel ipw2100/2200 driver
+# Deprecated; use CONFIG_DRIVER_WEXT=y instead.
+#CONFIG_DRIVER_IPW=y
+
+# Driver interface for Ralink driver
+#CONFIG_DRIVER_RALINK=y
+
+# Driver interface for generic Linux wireless extensions
+# Note: WEXT is deprecated in the current Linux kernel version and no new
+# functionality is added to it. nl80211-based interface is the new
+# replacement for WEXT and its use allows wpa_supplicant to properly control
+# the driver to improve existing functionality like roaming and to support new
+# functionality.
+CONFIG_DRIVER_WEXT=y
+
+# Driver interface for Linux drivers using the nl80211 kernel interface
+CONFIG_DRIVER_NL80211=y
+
+# driver_nl80211.c requires libnl. If you are compiling it yourself
+# you may need to point hostapd to your version of libnl.
+#
+#CFLAGS += -I$<path to libnl include files>
+#LIBS += -L$<path to libnl library files>
+
+# Use libnl v2.0 (or 3.0) libraries.
+#CONFIG_LIBNL20=y
+
+# Use libnl 3.2 libraries (if this is selected, CONFIG_LIBNL20 is ignored)
+CONFIG_LIBNL32=y
+
+
+# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
+#CONFIG_DRIVER_BSD=y
+#CFLAGS += -I/usr/local/include
+#LIBS += -L/usr/local/lib
+#LIBS_p += -L/usr/local/lib
+#LIBS_c += -L/usr/local/lib
+
+# Driver interface for Windows NDIS
+#CONFIG_DRIVER_NDIS=y
+#CFLAGS += -I/usr/include/w32api/ddk
+#LIBS += -L/usr/local/lib
+# For native build using mingw
+#CONFIG_NATIVE_WINDOWS=y
+# Additional directories for cross-compilation on Linux host for mingw target
+#CFLAGS += -I/opt/mingw/mingw32/include/ddk
+#LIBS += -L/opt/mingw/mingw32/lib
+#CC=mingw32-gcc
+# By default, driver_ndis uses WinPcap for low-level operations. This can be
+# replaced with the following option which replaces WinPcap calls with NDISUIO.
+# However, this requires that WZC is disabled (net stop wzcsvc) before starting
+# wpa_supplicant.
+# CONFIG_USE_NDISUIO=y
+
+# Driver interface for development testing
+#CONFIG_DRIVER_TEST=y
+
+# Driver interface for wired Ethernet drivers
+CONFIG_DRIVER_WIRED=y
+
+# Driver interface for the Broadcom RoboSwitch family
+#CONFIG_DRIVER_ROBOSWITCH=y
+
+# Driver interface for no driver (e.g., WPS ER only)
+#CONFIG_DRIVER_NONE=y
+
+# Enable IEEE 802.1X Supplicant (automatically included if any EAP method is
+# included)
+CONFIG_IEEE8021X_EAPOL=y
+
+# EAP-MD5
+CONFIG_EAP_MD5=y
+
+# EAP-MSCHAPv2
+CONFIG_EAP_MSCHAPV2=y
+
+# EAP-TLS
+CONFIG_EAP_TLS=y
+
+# EAL-PEAP
+CONFIG_EAP_PEAP=y
+
+# EAP-TTLS
+CONFIG_EAP_TTLS=y
+
+# EAP-FAST
+# Note: If OpenSSL is used as the TLS library, OpenSSL 1.0 or newer is needed
+# for EAP-FAST support. Older OpenSSL releases would need to be patched, e.g.,
+# with openssl-0.9.8x-tls-extensions.patch, to add the needed functions.
+#CONFIG_EAP_FAST=y
+
+# EAP-GTC
+CONFIG_EAP_GTC=y
+
+# EAP-OTP
+CONFIG_EAP_OTP=y
+
+# EAP-SIM (enable CONFIG_PCSC, if EAP-SIM is used)
+#CONFIG_EAP_SIM=y
+
+# EAP-PSK (experimental; this is _not_ needed for WPA-PSK)
+#CONFIG_EAP_PSK=y
+
+# EAP-pwd (secure authentication using only a password)
+#CONFIG_EAP_PWD=y
+
+# EAP-PAX
+#CONFIG_EAP_PAX=y
+
+# LEAP
+CONFIG_EAP_LEAP=y
+
+# EAP-AKA (enable CONFIG_PCSC, if EAP-AKA is used)
+#CONFIG_EAP_AKA=y
+
+# EAP-AKA' (enable CONFIG_PCSC, if EAP-AKA' is used).
+# This requires CONFIG_EAP_AKA to be enabled, too.
+#CONFIG_EAP_AKA_PRIME=y
+
+# Enable USIM simulator (Milenage) for EAP-AKA
+#CONFIG_USIM_SIMULATOR=y
+
+# EAP-SAKE
+#CONFIG_EAP_SAKE=y
+
+# EAP-GPSK
+#CONFIG_EAP_GPSK=y
+# Include support for optional SHA256 cipher suite in EAP-GPSK
+#CONFIG_EAP_GPSK_SHA256=y
+
+# EAP-TNC and related Trusted Network Connect support (experimental)
+#CONFIG_EAP_TNC=y
+
+# Wi-Fi Protected Setup (WPS)
+CONFIG_WPS=y
+# Enable WSC 2.0 support
+#CONFIG_WPS2=y
+# Enable WPS external registrar functionality
+#CONFIG_WPS_ER=y
+# Disable credentials for an open network by default when acting as a WPS
+# registrar.
+#CONFIG_WPS_REG_DISABLE_OPEN=y
+# Enable WPS support with NFC config method
+#CONFIG_WPS_NFC=y
+
+# EAP-IKEv2
+#CONFIG_EAP_IKEV2=y
+
+# EAP-EKE
+#CONFIG_EAP_EKE=y
+
+# PKCS#12 (PFX) support (used to read private key and certificate file from
+# a file that usually has extension .p12 or .pfx)
+CONFIG_PKCS12=y
+
+# Smartcard support (i.e., private key on a smartcard), e.g., with openssl
+# engine.
+CONFIG_SMARTCARD=y
+
+# PC/SC interface for smartcards (USIM, GSM SIM)
+# Enable this if EAP-SIM or EAP-AKA is included
+#CONFIG_PCSC=y
+
+# Support HT overrides (disable HT/HT40, mask MCS rates, etc.)
+#CONFIG_HT_OVERRIDES=y
+
+# Support VHT overrides (disable VHT, mask MCS rates, etc.)
+#CONFIG_VHT_OVERRIDES=y
+
+# Development testing
+#CONFIG_EAPOL_TEST=y
+
+# Select control interface backend for external programs, e.g, wpa_cli:
+# unix = UNIX domain sockets (default for Linux/*BSD)
+# udp = UDP sockets using localhost (127.0.0.1)
+# named_pipe = Windows Named Pipe (default for Windows)
+# udp-remote = UDP sockets with remote access (only for tests systems/purpose)
+# y = use default (backwards compatibility)
+# If this option is commented out, control interface is not included in the
+# build.
+CONFIG_CTRL_IFACE=y
+
+# Include support for GNU Readline and History Libraries in wpa_cli.
+# When building a wpa_cli binary for distribution, please note that these
+# libraries are licensed under GPL and as such, BSD license may not apply for
+# the resulting binary.
+#CONFIG_READLINE=y
+
+# Include internal line edit mode in wpa_cli. This can be used as a replacement
+# for GNU Readline to provide limited command line editing and history support.
+#CONFIG_WPA_CLI_EDIT=y
+
+# Remove debugging code that is printing out debug message to stdout.
+# This can be used to reduce the size of the wpa_supplicant considerably
+# if debugging code is not needed. The size reduction can be around 35%
+# (e.g., 90 kB).
+#CONFIG_NO_STDOUT_DEBUG=y
+
+# Remove WPA support, e.g., for wired-only IEEE 802.1X supplicant, to save
+# 35-50 kB in code size.
+#CONFIG_NO_WPA=y
+
+# Remove IEEE 802.11i/WPA-Personal ASCII passphrase support
+# This option can be used to reduce code size by removing support for
+# converting ASCII passphrases into PSK. If this functionality is removed, the
+# PSK can only be configured as the 64-octet hexstring (e.g., from
+# wpa_passphrase). This saves about 0.5 kB in code size.
+#CONFIG_NO_WPA_PASSPHRASE=y
+
+# Disable scan result processing (ap_mode=1) to save code size by about 1 kB.
+# This can be used if ap_scan=1 mode is never enabled.
+#CONFIG_NO_SCAN_PROCESSING=y
+
+# Select configuration backend:
+# file = text file (e.g., wpa_supplicant.conf; note: the configuration file
+#	path is given on command line, not here; this option is just used to
+#	select the backend that allows configuration files to be used)
+# winreg = Windows registry (see win_example.reg for an example)
+CONFIG_BACKEND=file
+
+# Remove configuration write functionality (i.e., to allow the configuration
+# file to be updated based on runtime configuration changes). The runtime
+# configuration can still be changed, the changes are just not going to be
+# persistent over restarts. This option can be used to reduce code size by
+# about 3.5 kB.
+#CONFIG_NO_CONFIG_WRITE=y
+
+# Remove support for configuration blobs to reduce code size by about 1.5 kB.
+#CONFIG_NO_CONFIG_BLOBS=y
+
+# Select program entry point implementation:
+# main = UNIX/POSIX like main() function (default)
+# main_winsvc = Windows service (read parameters from registry)
+# main_none = Very basic example (development use only)
+#CONFIG_MAIN=main
+
+# Select wrapper for operatins system and C library specific functions
+# unix = UNIX/POSIX like systems (default)
+# win32 = Windows systems
+# none = Empty template
+#CONFIG_OS=unix
+
+# Select event loop implementation
+# eloop = select() loop (default)
+# eloop_win = Windows events and WaitForMultipleObject() loop
+#CONFIG_ELOOP=eloop
+
+# Should we use poll instead of select? Select is used by default.
+#CONFIG_ELOOP_POLL=y
+
+# Select layer 2 packet implementation
+# linux = Linux packet socket (default)
+# pcap = libpcap/libdnet/WinPcap
+# freebsd = FreeBSD libpcap
+# winpcap = WinPcap with receive thread
+# ndis = Windows NDISUIO (note: requires CONFIG_USE_NDISUIO=y)
+# none = Empty template
+#CONFIG_L2_PACKET=linux
+
+# PeerKey handshake for Station to Station Link (IEEE 802.11e DLS)
+CONFIG_PEERKEY=y
+
+# IEEE 802.11w (management frame protection), also known as PMF
+# Driver support is also needed for IEEE 802.11w.
+#CONFIG_IEEE80211W=y
+
+# Select TLS implementation
+# openssl = OpenSSL (default)
+# gnutls = GnuTLS
+# internal = Internal TLSv1 implementation (experimental)
+# none = Empty template
+#CONFIG_TLS=openssl
+
+# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.1)
+# can be enabled to get a stronger construction of messages when block ciphers
+# are used. It should be noted that some existing TLS v1.0 -based
+# implementation may not be compatible with TLS v1.1 message (ClientHello is
+# sent prior to negotiating which version will be used)
+#CONFIG_TLSV11=y
+
+# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.2)
+# can be enabled to enable use of stronger crypto algorithms. It should be
+# noted that some existing TLS v1.0 -based implementation may not be compatible
+# with TLS v1.2 message (ClientHello is sent prior to negotiating which version
+# will be used)
+#CONFIG_TLSV12=y
+
+# If CONFIG_TLS=internal is used, additional library and include paths are
+# needed for LibTomMath. Alternatively, an integrated, minimal version of
+# LibTomMath can be used. See beginning of libtommath.c for details on benefits
+# and drawbacks of this option.
+#CONFIG_INTERNAL_LIBTOMMATH=y
+#ifndef CONFIG_INTERNAL_LIBTOMMATH
+#LTM_PATH=/usr/src/libtommath-0.39
+#CFLAGS += -I$(LTM_PATH)
+#LIBS += -L$(LTM_PATH)
+#LIBS_p += -L$(LTM_PATH)
+#endif
+# At the cost of about 4 kB of additional binary size, the internal LibTomMath
+# can be configured to include faster routines for exptmod, sqr, and div to
+# speed up DH and RSA calculation considerably
+#CONFIG_INTERNAL_LIBTOMMATH_FAST=y
+
+# Include NDIS event processing through WMI into wpa_supplicant/wpasvc.
+# This is only for Windows builds and requires WMI-related header files and
+# WbemUuid.Lib from Platform SDK even when building with MinGW.
+#CONFIG_NDIS_EVENTS_INTEGRATED=y
+#PLATFORMSDKLIB="/opt/Program Files/Microsoft Platform SDK/Lib"
+
+# Add support for old DBus control interface
+# (fi.epitest.hostap.WPASupplicant)
+#CONFIG_CTRL_IFACE_DBUS=y
+
+# Add support for new DBus control interface
+# (fi.w1.hostap.wpa_supplicant1)
+CONFIG_CTRL_IFACE_DBUS_NEW=y
+
+# Add introspection support for new DBus control interface
+#CONFIG_CTRL_IFACE_DBUS_INTRO=y
+
+# Add support for loading EAP methods dynamically as shared libraries.
+# When this option is enabled, each EAP method can be either included
+# statically (CONFIG_EAP_<method>=y) or dynamically (CONFIG_EAP_<method>=dyn).
+# Dynamic EAP methods are build as shared objects (eap_*.so) and they need to
+# be loaded in the beginning of the wpa_supplicant configuration file
+# (see load_dynamic_eap parameter in the example file) before being used in
+# the network blocks.
+#
+# Note that some shared parts of EAP methods are included in the main program
+# and in order to be able to use dynamic EAP methods using these parts, the
+# main program must have been build with the EAP method enabled (=y or =dyn).
+# This means that EAP-TLS/PEAP/TTLS/FAST cannot be added as dynamic libraries
+# unless at least one of them was included in the main build to force inclusion
+# of the shared code. Similarly, at least one of EAP-SIM/AKA must be included
+# in the main build to be able to load these methods dynamically.
+#
+# Please also note that using dynamic libraries will increase the total binary
+# size. Thus, it may not be the best option for targets that have limited
+# amount of memory/flash.
+#CONFIG_DYNAMIC_EAP_METHODS=y
+
+# IEEE Std 802.11r-2008 (Fast BSS Transition)
+#CONFIG_IEEE80211R=y
+
+# Add support for writing debug log to a file (/tmp/wpa_supplicant-log-#.txt)
+#CONFIG_DEBUG_FILE=y
+
+# Send debug messages to syslog instead of stdout
+CONFIG_DEBUG_SYSLOG=y
+# Set syslog facility for debug messages
+CONFIG_DEBUG_SYSLOG_FACILITY=LOG_DAEMON
+
+# Add support for sending all debug messages (regardless of debug verbosity)
+# to the Linux kernel tracing facility. This helps debug the entire stack by
+# making it easy to record everything happening from the driver up into the
+# same file, e.g., using trace-cmd.
+#CONFIG_DEBUG_LINUX_TRACING=y
+
+# Enable privilege separation (see README 'Privilege separation' for details)
+#CONFIG_PRIVSEP=y
+
+# Enable mitigation against certain attacks against TKIP by delaying Michael
+# MIC error reports by a random amount of time between 0 and 60 seconds
+#CONFIG_DELAYED_MIC_ERROR_REPORT=y
+
+# Enable tracing code for developer debugging
+# This tracks use of memory allocations and other registrations and reports
+# incorrect use with a backtrace of call (or allocation) location.
+#CONFIG_WPA_TRACE=y
+# For BSD, uncomment these.
+#LIBS += -lexecinfo
+#LIBS_p += -lexecinfo
+#LIBS_c += -lexecinfo
+
+# Use libbfd to get more details for developer debugging
+# This enables use of libbfd to get more detailed symbols for the backtraces
+# generated by CONFIG_WPA_TRACE=y.
+#CONFIG_WPA_TRACE_BFD=y
+# For BSD, uncomment these.
+#LIBS += -lbfd -liberty -lz
+#LIBS_p += -lbfd -liberty -lz
+#LIBS_c += -lbfd -liberty -lz
+
+CONFIG_TLS = %ssl%
+CONFIG_CTRL_IFACE_DBUS=y
+CONFIG_CTRL_IFACE_DBUS_NEW=y
+
+# wpa_supplicant depends on strong random number generation being available
+# from the operating system. os_get_random() function is used to fetch random
+# data when needed, e.g., for key generation. On Linux and BSD systems, this
+# works by reading /dev/urandom. It should be noted that the OS entropy pool
+# needs to be properly initialized before wpa_supplicant is started. This is
+# important especially on embedded devices that do not have a hardware random
+# number generator and may by default start up with minimal entropy available
+# for random number generation.
+#
+# As a safety net, wpa_supplicant is by default trying to internally collect
+# additional entropy for generating random data to mix in with the data fetched
+# from the OS. This by itself is not considered to be very strong, but it may
+# help in cases where the system pool is not initialized properly. However, it
+# is very strongly recommended that the system pool is initialized with enough
+# entropy either by using hardware assisted random number generator or by
+# storing state over device reboots.
+#
+# wpa_supplicant can be configured to maintain its own entropy store over
+# restarts to enhance random number generation. This is not perfect, but it is
+# much more secure than using the same sequence of random numbers after every
+# reboot. This can be enabled with -e<entropy file> command line option. The
+# specified file needs to be readable and writable by wpa_supplicant.
+#
+# If the os_get_random() is known to provide strong random data (e.g., on
+# Linux/BSD, the board in question is known to have reliable source of random
+# data from /dev/urandom), the internal wpa_supplicant random pool can be
+# disabled. This will save some in binary size and CPU use. However, this
+# should only be considered for builds that are known to be used on devices
+# that meet the requirements described above.
+#CONFIG_NO_RANDOM_POOL=y
+
+# IEEE 802.11n (High Throughput) support (mainly for AP mode)
+#CONFIG_IEEE80211N=y
+
+# IEEE 802.11ac (Very High Throughput) support (mainly for AP mode)
+# (depends on CONFIG_IEEE80211N)
+#CONFIG_IEEE80211AC=y
+
+# Wireless Network Management (IEEE Std 802.11v-2011)
+# Note: This is experimental and not complete implementation.
+#CONFIG_WNM=y
+
+# Interworking (IEEE 802.11u)
+# This can be used to enable functionality to improve interworking with
+# external networks (GAS/ANQP to learn more about the networks and network
+# selection based on available credentials).
+#CONFIG_INTERWORKING=y
+
+# Hotspot 2.0
+#CONFIG_HS20=y
+
+# Disable roaming in wpa_supplicant
+#CONFIG_NO_ROAMING=y
+
+# AP mode operations with wpa_supplicant
+# This can be used for controlling AP mode operations with wpa_supplicant. It
+# should be noted that this is mainly aimed at simple cases like
+# WPA2-Personal while more complex configurations like WPA2-Enterprise with an
+# external RADIUS server can be supported with hostapd.
+CONFIG_AP=y
+
+CONFIG_BGSCAN_SIMPLE=y
+
+# P2P (Wi-Fi Direct)
+# This can be used to enable P2P support in wpa_supplicant. See README-P2P for
+# more information on P2P operations.
+#CONFIG_P2P=y
+
+# Enable TDLS support
+#CONFIG_TDLS=y
+
+# Wi-Fi Direct
+# This can be used to enable Wi-Fi Direct extensions for P2P using an external
+# program to control the additional information exchanges in the messages.
+#CONFIG_WIFI_DISPLAY=y
+
+# Autoscan
+# This can be used to enable automatic scan support in wpa_supplicant.
+# See wpa_supplicant.conf for more information on autoscan usage.
+#
+# Enabling directly a module will enable autoscan support.
+# For exponential module:
+CONFIG_AUTOSCAN_EXPONENTIAL=y
+# For periodic module:
+#CONFIG_AUTOSCAN_PERIODIC=y
+
+# Password (and passphrase, etc.) backend for external storage
+# These optional mechanisms can be used to add support for storing passwords
+# and other secrets in external (to wpa_supplicant) location. This allows, for
+# example, operating system specific key storage to be used
+#
+# External password backend for testing purposes (developer use)
+#CONFIG_EXT_PASSWORD_TEST=y
+
+##################################
+# BEGIN NXP CUSTOMIZATION
+##################################
+
+CONFIG_SUITEB=y
+CONFIG_SUITEB192=y
+# Simultaneous Authentication of Equals (SAE), WPA3-Personal
+CONFIG_SAE=y
+# IEEE 802.11w (management frame protection), also known as PMF
+# Driver support is also needed for IEEE 802.11w.
+CONFIG_IEEE80211W=y
+# IEEE Std 802.11r-2008 (Fast BSS Transition) for station mode
+CONFIG_IEEE80211R=y
+# IEEE 802.11n (High Throughput) support (mainly for AP mode)
+CONFIG_IEEE80211N=y
+# IEEE 802.11ac (Very High Throughput) support (mainly for AP mode)
+# (depends on CONFIG_IEEE80211N)
+CONFIG_IEEE80211AC=y
+# Wireless Network Management (IEEE Std 802.11v-2011)
+# Note: This is experimental and not complete implementation.
+CONFIG_WNM=y
+# P2P (Wi-Fi Direct)
+# This can be used to enable P2P support in wpa_supplicant. See README-P2P for
+# more information on P2P operations.
+CONFIG_P2P=y
+# Enable TDLS support
+CONFIG_TDLS=y
+# Support Multi Band Operation
+CONFIG_MBO=y
+# Hotspot 2.0
+CONFIG_HS20=y
+CONFIG_DPP=y
+# Opportunistic Wireless Encryption (OWE)
+# Experimental implementation of draft-harkins-owe-07.txt
+CONFIG_OWE=y
+# Interworking (IEEE 802.11u)
+# This can be used to enable functionality to improve interworking with
+# external networks (GAS/ANQP to learn more about the networks and network
+# selection based on available credentials).
+CONFIG_INTERWORKING=y
+# Disable roaming in wpa_supplicant
+CONFIG_NO_ROAMING=y
+CONFIG_TESTING_OPTIONS=y
+# EAP-FAST
+CONFIG_EAP_FAST=y
+# Enable SIM simulator (Milenage) for EAP-SIM
+CONFIG_SIM_SIMULATOR=y
+# EAP-PSK (experimental; this is _not_ needed for WPA-PSK)
+CONFIG_EAP_PSK=y
+# EAP-pwd (secure authentication using only a password)
+CONFIG_EAP_PWD=y
+# EAP-SAKE
+CONFIG_EAP_SAKE=y
+# EAP-GPSK
+CONFIG_EAP_GPSK=y
+# Include support for optional SHA256 cipher suite in EAP-GPSK
+CONFIG_EAP_GPSK_SHA256=y
+# Enable WPS external registrar functionality
+CONFIG_WPS_ER=y
+# Include support for GNU Readline and History Libraries in wpa_cli.
+# When building a wpa_cli binary for distribution, please note that these
+# libraries are licensed under GPL and as such, BSD license may not apply for
+# the resulting binary.
+CONFIG_READLINE=y
+
+# External PMKSA cache control
+# This can be used to enable control interface commands that allow the current
+# PMKSA cache entries to be fetched and new entries to be added.
+CONFIG_PMKSA_CACHE_EXTERNAL=y
+
+# Support Operating Channel Validation
+CONFIG_OCV=y
diff --git a/recipes-connectivity/wpa-supplicant/wpa-supplicant/wpa-supplicant.sh b/recipes-connectivity/wpa-supplicant/wpa-supplicant/wpa-supplicant.sh
new file mode 100644
index 0000000..35a1aa6
--- /dev/null
+++ b/recipes-connectivity/wpa-supplicant/wpa-supplicant/wpa-supplicant.sh
@@ -0,0 +1,86 @@
+#!/bin/sh
+
+
+WPA_SUP_BIN="/usr/sbin/wpa_supplicant"
+WPA_SUP_PNAME="wpa_supplicant"
+WPA_SUP_PIDFILE="/var/run/wpa_supplicant.$IFACE.pid"
+WPA_COMMON_CTRL_IFACE="/var/run/wpa_supplicant"
+WPA_SUP_OPTIONS="-B -P $WPA_SUP_PIDFILE -i $IFACE"
+
+VERBOSITY=0
+
+
+if [ -s "$IF_WPA_CONF" ]; then
+	WPA_SUP_CONF="-c $IF_WPA_CONF"
+else
+	exit 0
+fi
+
+if [ ! -x "$WPA_SUP_BIN" ]; then
+	
+	if [ "$VERBOSITY" = "1" ]; then
+		echo "$WPA_SUP_PNAME: binaries not executable or missing from $WPA_SUP_BIN"
+	fi
+	
+	exit 1
+fi
+
+if [ "$MODE" = "start" ] ; then
+	# driver type of interface, defaults to wext when undefined
+	if [ -s "/etc/wpa_supplicant/driver.$IFACE" ]; then
+		IF_WPA_DRIVER=$(cat "/etc/wpa_supplicant/driver.$IFACE")
+	elif [ -z "$IF_WPA_DRIVER" ]; then
+		
+		if [ "$VERBOSITY" = "1" ]; then
+			echo "$WPA_SUP_PNAME: wpa-driver not provided, using \"wext\""
+		fi
+		
+		IF_WPA_DRIVER="wext"
+	fi
+	
+	# if we have passed the criteria, start wpa_supplicant
+	if [ -n "$WPA_SUP_CONF" ]; then
+		
+		if [ "$VERBOSITY" = "1" ]; then
+			echo "$WPA_SUP_PNAME: $WPA_SUP_BIN $WPA_SUP_OPTIONS $WPA_SUP_CONF -D $IF_WPA_DRIVER"
+		fi
+		
+		start-stop-daemon --start --quiet \
+			--name $WPA_SUP_PNAME --startas $WPA_SUP_BIN --pidfile $WPA_SUP_PIDFILE \
+			--  $WPA_SUP_OPTIONS $WPA_SUP_CONF -D $IF_WPA_DRIVER
+	fi
+
+	# if the interface socket exists, then wpa_supplicant was invoked successfully
+	if [ -S "$WPA_COMMON_CTRL_IFACE/$IFACE" ]; then
+	
+		if [ "$VERBOSITY" = "1" ]; then
+			echo "$WPA_SUP_PNAME: ctrl_interface socket located at $WPA_COMMON_CTRL_IFACE/$IFACE"
+		fi
+
+		exit 0
+		
+	fi
+	
+elif [ "$MODE" = "stop" ]; then
+
+	if [ -f "$WPA_SUP_PIDFILE" ]; then
+		
+		if [ "$VERBOSITY" = "1" ]; then
+			echo "$WPA_SUP_PNAME: terminating $WPA_SUP_PNAME daemon"
+		fi
+		
+		start-stop-daemon --stop --quiet \
+			--name $WPA_SUP_PNAME --pidfile	$WPA_SUP_PIDFILE
+			
+		if [ -S "$WPA_COMMON_CTRL_IFACE/$IFACE" ]; then
+			rm -f $WPA_COMMON_CTRL_IFACE/$IFACE
+		fi
+			
+		if [ -f "$WPA_SUP_PIDFILE" ]; then
+			rm -f $WPA_SUP_PIDFILE
+		fi
+	fi
+
+fi
+
+exit 0
diff --git a/recipes-connectivity/wpa-supplicant/wpa-supplicant/wpa_supplicant.conf b/recipes-connectivity/wpa-supplicant/wpa-supplicant/wpa_supplicant.conf
new file mode 100644
index 0000000..68258f5
--- /dev/null
+++ b/recipes-connectivity/wpa-supplicant/wpa-supplicant/wpa_supplicant.conf
@@ -0,0 +1,690 @@
+##### Example wpa_supplicant configuration file ###############################
+#
+# This file describes configuration file format and lists all available option.
+# Please also take a look at simpler configuration examples in 'examples'
+# subdirectory.
+#
+# Empty lines and lines starting with # are ignored
+
+# NOTE! This file may contain password information and should probably be made
+# readable only by root user on multiuser systems.
+
+# Note: All file paths in this configuration file should use full (absolute,
+# not relative to working directory) path in order to allow working directory
+# to be changed. This can happen if wpa_supplicant is run in the background.
+
+# Whether to allow wpa_supplicant to update (overwrite) configuration
+#
+# This option can be used to allow wpa_supplicant to overwrite configuration
+# file whenever configuration is changed (e.g., new network block is added with
+# wpa_cli or wpa_gui, or a password is changed). This is required for
+# wpa_cli/wpa_gui to be able to store the configuration changes permanently.
+# Please note that overwriting configuration file will remove the comments from
+# it.
+#update_config=1
+
+# global configuration (shared by all network blocks)
+#
+# Parameters for the control interface. If this is specified, wpa_supplicant
+# will open a control interface that is available for external programs to
+# manage wpa_supplicant. The meaning of this string depends on which control
+# interface mechanism is used. For all cases, the existence of this parameter
+# in configuration is used to determine whether the control interface is
+# enabled.
+#
+# For UNIX domain sockets (default on Linux and BSD): This is a directory that
+# will be created for UNIX domain sockets for listening to requests from
+# external programs (CLI/GUI, etc.) for status information and configuration.
+# The socket file will be named based on the interface name, so multiple
+# wpa_supplicant processes can be run at the same time if more than one
+# interface is used.
+# /var/run/wpa_supplicant is the recommended directory for sockets and by
+# default, wpa_cli will use it when trying to connect with wpa_supplicant.
+#
+# Access control for the control interface can be configured by setting the
+# directory to allow only members of a group to use sockets. This way, it is
+# possible to run wpa_supplicant as root (since it needs to change network
+# configuration and open raw sockets) and still allow GUI/CLI components to be
+# run as non-root users. However, since the control interface can be used to
+# change the network configuration, this access needs to be protected in many
+# cases. By default, wpa_supplicant is configured to use gid 0 (root). If you
+# want to allow non-root users to use the control interface, add a new group
+# and change this value to match with that group. Add users that should have
+# control interface access to this group. If this variable is commented out or
+# not included in the configuration file, group will not be changed from the
+# value it got by default when the directory or socket was created.
+#
+# When configuring both the directory and group, use following format:
+# DIR=/var/run/wpa_supplicant GROUP=wheel
+# DIR=/var/run/wpa_supplicant GROUP=0
+# (group can be either group name or gid)
+#
+# For UDP connections (default on Windows): The value will be ignored. This
+# variable is just used to select that the control interface is to be created.
+# The value can be set to, e.g., udp (ctrl_interface=udp)
+#
+# For Windows Named Pipe: This value can be used to set the security descriptor
+# for controlling access to the control interface. Security descriptor can be
+# set using Security Descriptor String Format (see http://msdn.microsoft.com/
+# library/default.asp?url=/library/en-us/secauthz/security/
+# security_descriptor_string_format.asp). The descriptor string needs to be
+# prefixed with SDDL=. For example, ctrl_interface=SDDL=D: would set an empty
+# DACL (which will reject all connections). See README-Windows.txt for more
+# information about SDDL string format.
+#
+ctrl_interface=/var/run/wpa_supplicant
+
+# IEEE 802.1X/EAPOL version
+# wpa_supplicant is implemented based on IEEE Std 802.1X-2004 which defines
+# EAPOL version 2. However, there are many APs that do not handle the new
+# version number correctly (they seem to drop the frames completely). In order
+# to make wpa_supplicant interoperate with these APs, the version number is set
+# to 1 by default. This configuration value can be used to set it to the new
+# version (2).
+eapol_version=1
+
+# AP scanning/selection
+# By default, wpa_supplicant requests driver to perform AP scanning and then
+# uses the scan results to select a suitable AP. Another alternative is to
+# allow the driver to take care of AP scanning and selection and use
+# wpa_supplicant just to process EAPOL frames based on IEEE 802.11 association
+# information from the driver.
+# 1: wpa_supplicant initiates scanning and AP selection
+# 0: driver takes care of scanning, AP selection, and IEEE 802.11 association
+#    parameters (e.g., WPA IE generation); this mode can also be used with
+#    non-WPA drivers when using IEEE 802.1X mode; do not try to associate with
+#    APs (i.e., external program needs to control association). This mode must
+#    also be used when using wired Ethernet drivers.
+# 2: like 0, but associate with APs using security policy and SSID (but not
+#    BSSID); this can be used, e.g., with ndiswrapper and NDIS drivers to
+#    enable operation with hidden SSIDs and optimized roaming; in this mode,
+#    the network blocks in the configuration file are tried one by one until
+#    the driver reports successful association; each network block should have
+#    explicit security policy (i.e., only one option in the lists) for
+#    key_mgmt, pairwise, group, proto variables
+ap_scan=1
+
+# EAP fast re-authentication
+# By default, fast re-authentication is enabled for all EAP methods that
+# support it. This variable can be used to disable fast re-authentication.
+# Normally, there is no need to disable this.
+fast_reauth=1
+
+# OpenSSL Engine support
+# These options can be used to load OpenSSL engines.
+# The two engines that are supported currently are shown below:
+# They are both from the opensc project (http://www.opensc.org/)
+# By default no engines are loaded.
+# make the opensc engine available
+#opensc_engine_path=/usr/lib/opensc/engine_opensc.so
+# make the pkcs11 engine available
+#pkcs11_engine_path=/usr/lib/opensc/engine_pkcs11.so
+# configure the path to the pkcs11 module required by the pkcs11 engine
+#pkcs11_module_path=/usr/lib/pkcs11/opensc-pkcs11.so
+
+# Dynamic EAP methods
+# If EAP methods were built dynamically as shared object files, they need to be
+# loaded here before being used in the network blocks. By default, EAP methods
+# are included statically in the build, so these lines are not needed
+#load_dynamic_eap=/usr/lib/wpa_supplicant/eap_tls.so
+#load_dynamic_eap=/usr/lib/wpa_supplicant/eap_md5.so
+
+# Driver interface parameters
+# This field can be used to configure arbitrary driver interace parameters. The
+# format is specific to the selected driver interface. This field is not used
+# in most cases.
+#driver_param="field=value"
+
+# Maximum lifetime for PMKSA in seconds; default 43200
+#dot11RSNAConfigPMKLifetime=43200
+# Threshold for reauthentication (percentage of PMK lifetime); default 70
+#dot11RSNAConfigPMKReauthThreshold=70
+# Timeout for security association negotiation in seconds; default 60
+#dot11RSNAConfigSATimeout=60
+
+# network block
+#
+# Each network (usually AP's sharing the same SSID) is configured as a separate
+# block in this configuration file. The network blocks are in preference order
+# (the first match is used).
+#
+# network block fields:
+#
+# disabled:
+#	0 = this network can be used (default)
+#	1 = this network block is disabled (can be enabled through ctrl_iface,
+#	    e.g., with wpa_cli or wpa_gui)
+#
+# id_str: Network identifier string for external scripts. This value is passed
+#	to external action script through wpa_cli as WPA_ID_STR environment
+#	variable to make it easier to do network specific configuration.
+#
+# ssid: SSID (mandatory); either as an ASCII string with double quotation or
+#	as hex string; network name
+#
+# scan_ssid:
+#	0 = do not scan this SSID with specific Probe Request frames (default)