diff options
Diffstat (limited to 'scripts/upgrade/log.txt')
| -rw-r--r-- | scripts/upgrade/log.txt | 579 |
1 files changed, 0 insertions, 579 deletions
diff --git a/scripts/upgrade/log.txt b/scripts/upgrade/log.txt deleted file mode 100644 index 550218a..0000000 --- a/scripts/upgrade/log.txt +++ /dev/null @@ -1,579 +0,0 @@ - - _ _ - _ __ ___ | | (_)_ __ _ ___ __ - | '_ ` _ \| | | | '_ \| | | \ \/ / - | | | | | | |___| | | | | |_| |> < - |_| |_| |_|_____|_|_| |_|\__,_/_/\_\ - -MultiTech Systems mLinux GNU/Linux -mLinux 4.0.0 mtcdt /dev/ttyS0 - - -Version: 4.0.1 -Date: 2018-06-12T11:04:17 -mtcdt login: mtadm -Password: -mtcdt:~$ cd /var/volatile -mtcdt:/var/volatile$ ls -log tmp upgrade-mts-io-2.1.0-3.12.70r20.bin -mtcdt:/var/volatile$ sudo -s -Password: -mtcdt:/var/volatile# mlinux-firmware-upgrade upgrade-mts-io-2.1.0-3.12.70r20.bin -firmware_upgrade: Checking MD5 for install.sh... --: OK -firmware_upgrade: Rebooting - -Broadcast message from root@mtcdt (ttyS0) (Wed Jun 20 15:33:59 2018): - -The system is going down for reboot NOW! -INIT: Switching to runlevel: 6 -mtcdt:/var/volatile# INIT: Sending processes the TERM signal -Stopping ifplugd: done -Stopping OpenBSD Secure Shell server: sshdstopped /usr/sbin/sshd (pid 557) -. -Stopping GPS (Global Positioning System) daemon gpsd -monit: disabled in /etc/default -Stopping bluetooth -/usr/libexec/bluetooth/bluetoothd -Stopping system message bus: macb f802c000.ethernet eth0: link down -dbus. -Stopping HOSTAP Daemon: no /usr/sbin/hostapd found; none killed -Stopping ntpd: done -Stopping syslogd/klogd: stopped syslogd (pid 604) -stopped klogd (pid 607) -done -bt-pan: disabled in /etc/default -No /usr/bin/python2.7 found running; none killed. -Stopping -Stopping lora-network-server: OK -Stopping Mosquitto... -Stopping crond: OK -Gracefully shutting down php-fpm warning, no pid file found - php-fpm is not running ? -lighttpd: disabled in /etc/default -Deconfiguring network interfaces... ifdown: interface eth0 not configured -done. -Sending all processes the TERM signal... -Sending all processes the KILL signal... -Unmounting remote filesystems... -Found /var/volatile/flash-upgrade/upgrade.bin -Checking MD5s --: OK - -Starting flash upgrade from /var/volatile/flash-upgrade/upgrade.bin... -install.sh starting in directory /var/volatile -rootfs / rootfs rw 0 0 -/dev/root / jffs2 rw,relatime 0 0 -devtmpfs /dev devtmpfs rw,relatime,size=126852k,nr_inodes=31713,mode=755 0 0 -proc /proc proc rw,relatime 0 0 -sysfs /sys sysfs rw,relatime 0 0 -tmpfs /run tmpfs rw,nosuid,nodev,mode=755 0 0 -tmpfs /var/volatile tmpfs rw,relatime 0 0 -/dev/mtdblock6 /var/config jffs2 rw,relatime 0 0 -/dev/mtdblock7 /var/oem jffs2 ro,relatime 0 0 -devpts /dev/pts devpts rw,relatime,gid=5,mode=620 0 0 -bin boot dev etc home lib media mnt opt proc run sbin sys tmp usr var www -lrwxrwxrwx 1 root root 8 Jun 12 12:13 /tmp -> /var/tmp -kernel-module-atmel-mci - 3.12.70-r20.1 -Upgradable kernel is installed --: OK -Update package list ... /usr/bin/opkg -f local.conf update -Downloading file:///var/volatile/flash-upgrade/upgrade-mts-io-2.1.0-3.12.70r20/repo/mtcdt/Packages.gz. -Updated source 'mlinux-mtcdt'. -/usr/bin/opkg -f local.conf install kernel-module-mts-io -Upgrading kernel-module-mts-io from 2.0.4-r0.0-3.12.70r20.0 to 2.1.0-r0.0-3.12.70r20.0 on root. -Installing kernel-module-mts-io (2.1.0-r0.0) on root. -Downloading file:///var/volatile/flash-upgrade/upgrade-mts-io-2.1.0-3.12.70r20/repo/mtcdt/kernel-module-mts-io_2.1.0-r0.0-3.12.70r20.0_mtcdt.ipk. -Configuring kernel-module-mts-io. -Configuring useradd. -PATH=${PATH}:/sbin:/usr/sbin -/usr/bin/opkg -f local.conf install mts-io-noarch -Upgrading mts-io-noarch from 2.0.4-r0.0-3.12.70r20.0 to 2.1.0-r0.0-3.12.70r20.0 on root. -Installing mts-io-noarch (2.1.0-r0.0) on root. -Downloading file:///var/volatile/flash-upgrade/upgrade-mts-io-2.1.0-3.12.70r20/repo/mtcdt/mts-io-noarch_2.1.0-r0.0-3.12.70r20.0_mtcdt.ipk. -mts-io: Unloading mts-io module -[INFO] mts-io:cleanup:1138: cleaning up.... -[INFO] mts-io:lora_teardown:203: unloading LORA accessory card in port 1 -[INFO] mts-io:mts_io_exit:1221: exiting -OK -mts-io: Unloading mts-io module -OK -update-rc.d: /etc/init.d/mts-io exists during rc.d purge (continuing) - Removing any system startup links for mts-io ... - /etc/rcS.d/S39mts-io -update-rc.d: /etc/init.d/mts-io exists during rc.d purge (continuing) - Removing any system startup links for mts-io ... -Configuring mts-io-noarch. - Adding system startup for /etc/init.d/mts-io. -mts-io: Unloading mts-io module -OK -mts-io: Loading mts-io module -[INFO] mts-io:mts_io_init:1046: init: v2.1.0 -[INFO] mts-io:mts_id_eeprom_load:853: Pruning radio feature from mts-io -[INFO] mts-io:mts_id_eeprom_load:872: Adding WiFi/BT to mts-io driver -[INFO] mts-io:mts_id_eeprom_load:877: Adding GPS to mts-io driver -[INFO] mts-io:mts_id_eeprom_load:889: detected board MTCDT-0.1 -[INFO] mts-io:mts_id_eeprom_load:960: sizeof: 512 -[INFO] mts-io:mts_id_eeprom_load:961: vendor-id: Multi-Tech Systems -[INFO] mts-io:mts_id_eeprom_load:962: product-id: MTCDT-247L -[INFO] mts-io:mts_id_eeprom_load:963: device-id: 12345678 -[INFO] mts-io:mts_id_eeprom_load:964: hw-version: MTCDT-0.1 -[INFO] mts-io:mts_id_eeprom_load:971: mac-addr: 00:08:00:10:00:00 -[INFO] mts-io:mts_id_eeprom_load:973: imei: 123456789123456789 -[INFO] mts-io:mts_id_eeprom_load:974: capa-gps: yes -[INFO] mts-io:mts_id_eeprom_load:975: capa-din: no -[INFO] mts-io:mts_id_eeprom_load:976: capa-dout: no -[INFO] mts-io:mts_id_eeprom_load:977: capa-adc: no -[INFO] mts-io:mts_id_eeprom_load:978: capa-wifi: yes -[INFO] mts-io:mts_id_eeprom_load:979: capa-bluetooth: yes -[INFO] mts-io:mts_id_eeprom_load:980: capa-lora: no -[INFO] mts-io:mts_id_eeprom_load:989: mac-bluetooth: 00:00:00:00:00:00 -[INFO] mts-io:mts_id_eeprom_load:998: mac-wifi: 00:00:00:00:00:00 -[INFO] mts-io:mts_id_eeprom_load:1005: uuid: AAA00000000000000000000000000021 -[INFO] mts-io:load_port:663: accessory card 1 vendor-id: Multi-Tech Systems -[INFO] mts-io:load_port:664: accessory card 1 product-id: MTAC-LORA-H-915 -[INFO] mts-io:load_port:665: accessory card 1 device-id: P87040004 -[INFO] mts-io:load_port:666: accessory card 1 hw-version: MTAC-LORA-1.5 -[INFO] mts-io:load_port:687: accessory card 1 eui: 00:80:00:00:00:00:00:A4 -[INFO] mts-io:lora_setup:60: loading LORA accessory card in port 1 -[INFO] mts-io:lora_setup:90: created link [lora] to [ap1], success:0 -[INFO] mts-io:lora_setup:126: Substitute pins -[INFO] mts-io:lora_setup:131: LORA H: Replace name AP1_GPIO1 with name AP1_CDONE -[INFO] mts-io:lora_setup:132: LORA H: Replace pin number 70 with number 70 -[INFO] mts-io:lora_setup:131: LORA H: Replace name AP1_GPIO2 with name AP1_CRESET -[INFO] mts-io:lora_setup:132: LORA H: Replace pin number 71 with number 71 -[INFO] mts-io:lora_setup:189: ap_subdirs[port_index=0] = ce97bc60 ap_subdirs[port_index=0]=bf2b921c -[INFO] mts-io:load_port:622: no accessory card inserted in port 2 -mts-io: Resetting system modules -usb 1-2.2: USB disconnect, device number 8 -usb 1-2.2: new high-speed USB device number 9 using atmel-ehci -usb 1-2.2: New USB device found, idVendor=1618, idProduct=9113 -usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=6 -usb 1-2.2: Product: Wireless USB Network Module -usb 1-2.2: Manufacturer: Redpine Signals, Inc. -usb 1-2.2: SerialNumber: 000000000001 -usb 1-2: USB disconnect, device number 5 -usb 1-2.1: USB disconnect, device number 6 -usb 1-2.2: USB disconnect, device number 9 -usb 1-2: new high-speed USB device number 10 using atmel-ehci -usb 1-2: New USB device found, idVendor=0424, idProduct=2534 -usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 -hub 1-2:1.0: USB hub found -hub 1-2:1.0: 4 ports detected -usb 1-2.1: new high-speed USB device number 11 using atmel-ehci -usb 1-2.1: New USB device found, idVendor=0424, idProduct=2534 -usb 1-2.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 -hub 1-2.1:1.0: USB hub found -hub 1-2.1:1.0: 4 ports detected -usb 1-2.2: new high-speed USB device number 12 using atmel-ehci -usb 1-2.2: new high-speed USB device number 13 using atmel-ehci -usb 1-2.2: New USB device found, idVendor=1618, idProduct=9113 -usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=6 -usb 1-2.2: Product: Wireless USB Network Module -usb 1-2.2: Manufacturer: Redpine Signals, Inc. -usb 1-2.2: SerialNumber: 000000000001 -OK -Rebooting... reboot: Restarting systemþRomBOOT - - -AT91Bootstrap 3.5.3-r3 (Tue Jun 12 10:40:06 CDT 2018) - -NAND: ONFI flash detected -NAND: Manufacturer ID: 0x2c Chip ID: 0x32 -NAND: Disable On-Die ECC -NAND: Initialize PMECC params, cap: 0x4, sector: 0x200 -NAND: Image: Copy 0x80000 bytes from 0x40000 to 0x2ef00000 -NAND: Done to load image - - -U-Boot 2016.09.01 (Jun 12 2018 - 10:40:13 -0500) - -CPU: AT91SAM9G25 -Crystal frequency: 12 MHz -CPU clock : 400 MHz -Master clock : 133.333 MHz - Watchdog enabled -I2C: ready -DRAM: 256 MiB -WARNING: Caches not enabled -NAND: 256 MiB -MMC: mci: 0 -env_relocate_spec: crc1_ok=0 saved crc=0xffffffff calculated crc=0xf9137807 flags=255 -env_relocate_spec: crc2_ok=0 saved crc=0xffffffff calculated crc=0xf9137807 flags=255 -*** Warning - bad CRC, using default environment - -In: serial -Out: serial -Err: serial -vendor-id: Multi-Tech Systems -product-id: MTCDT-247L -device-id: 12345678 -hw-version: MTCDT-0.1 -mac-addr: 00:08:00:10:00:00 -Net: macb0 -Hit any key to stop autoboot: 0 - -Loading from nand0, offset 0x200000 - Image Name: mLinux/3.12.70/mtcdt - Image Type: ARM Linux Kernel Image (uncompressed) - Data Size: 3095397 Bytes = 3 MiB - Load Address: 20008000 - Entry Point: 20008000 -## Booting kernel from Legacy Image at 22000000 ... - Image Name: mLinux/3.12.70/mtcdt - Image Type: ARM Linux Kernel Image (uncompressed) - Data Size: 3095397 Bytes = 3 MiB - Load Address: 20008000 - Entry Point: 20008000 - Verifying Checksum ... OK - Loading Kernel Image ... OK - -Starting kernel ... - -Uncompressing Linux... done, booting the kernel. -Booting Linux on physical CPU 0x0 -Linux version 3.12.70 (jenkins@frylock) (gcc version 6.2.0 (GCC) ) #1 PREEMPT Tue Jun 12 10:38:30 CDT 2018 -Machine: Atmel AT91SAM (Device Tree), model: Multi-Tech Systems MTCDT -AT91: Detected soc type: at91sam9x5 -AT91: Detected soc subtype: at91sam9g25 -AT91: sram at 0x300000 of 0x8000 mapped at 0xfef70000 -Kernel command line: mem=256M console=ttyS0,115200 root=/dev/mtdblock8 ro rootfstype=jffs2 -PID hash table entries: 1024 (order: 0, 4096 bytes) -Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) -Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) -Virtual kernel memory layout: - vector : 0xffff0000 - 0xffff1000 ( 4 kB) - fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) - vmalloc : 0xd0800000 - 0xff000000 ( 744 MB) - lowmem : 0xc0000000 - 0xd0000000 ( 256 MB) - modules : 0xbf000000 - 0xc0000000 ( 16 MB) - .text : 0xc0008000 - 0xc0579324 (5573 kB) - .init : 0xc057a000 - 0xc05a4f84 ( 172 kB) - .data : 0xc05a6000 - 0xc05d1720 ( 174 kB) - .bss : 0xc05d172c - 0xc05f1d3c ( 130 kB) -Preemptible hierarchical RCU implementation. -NR_IRQS:16 nr_irqs:16 16 -sched_clock: 32 bits at 100 Hz, resolution 10000000ns, wraps every 4294967286ms -Calibrating delay loop... 199.06 BogoMIPS (lpj=995328) -pid_max: default: 32768 minimum: 301 -Mount-cache hash table entries: 512 -Initializing cgroup subsys blkio -CPU: Testing write buffer coherency: ok -Setting up static identity map for 0xc0420670 - 0xc04206c8 -devtmpfs: initialized -pinctrl core: initialized pinctrl subsystem -NET: Registered protocol family 16 -DMA: preallocated 256 KiB pool for atomic coherent allocations -AT91: Power Management (with slow clock mode) -AT91: Starting after software reset -gpio-at91 fffff400.gpio: at address fefff400 -gpio-at91 fffff600.gpio: at address fefff600 -gpio-at91 fffff800.gpio: at address fefff800 -gpio-at91 fffffa00.gpio: at address fefffa00 -pinctrl-at91 pinctrl.2: initialized AT91 pinctrl driver -bio: create slab <bio-0> at 0 -at_hdmac ffffec00.dma-controller: Atmel AHB DMA Controller ( cpy slave ), 8 channels -at_hdmac ffffee00.dma-controller: Atmel AHB DMA Controller ( cpy slave ), 8 channels -SCSI subsystem initialized -usbcore: registered new interface driver usbfs -usbcore: registered new interface driver hub -usbcore: registered new device driver usb -i2c-gpio i2c.3: using pins 30 (SDA) and 31 (SCL) -i2c-gpio i2c.4: using pins 64 (SDA) and 65 (SCL) -Switched to clocksource tcb_clksrc -NET: Registered protocol family 2 -TCP established hash table entries: 2048 (order: 2, 16384 bytes) -TCP bind hash table entries: 2048 (order: 1, 8192 bytes) -TCP: Hash tables configured (established 2048 bind 2048) -TCP: reno registered -UDP hash table entries: 256 (order: 0, 4096 bytes) -UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) -NET: Registered protocol family 1 -RPC: Registered named UNIX socket transport module. -RPC: Registered udp transport module. -RPC: Registered tcp transport module. -RPC: Registered tcp NFSv4.1 backchannel transport module. -NFS: Registering the id_resolver key type -Key type id_resolver registered -Key type id_legacy registered -jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. -ROMFS MTD (C) 2007 Red Hat, Inc. -msgmni has been set to 495 -Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) -io scheduler noop registered (default) -io scheduler deadline registered -io scheduler cfq registered -fffff200.serial: ttyS0 at MMIO 0xfffff200 (irq = 16, base_baud = 8333333) is a ATMEL_SERIAL -console [ttyS0] enabled -f8040000.serial: ttyS1 at MMIO 0xf8040000 (irq = 26, base_baud = 8333333) is a ATMEL_SERIAL -brd: module loaded -loop: module loaded -at24_get_setup: found a match for eeprom at 56 -at24 0-0056: 512 byte 24c04 EEPROM, writable, 16 bytes/write -sam9x5: read 512 bytes from id eeprom -at24_get_setup: found a match for eeprom at 50 -at24 1-0050: 512 byte 24c04 EEPROM, writable, 16 bytes/write -sam9x5: read 512 bytes from ap1 eeprom -at24_get_setup: found a match for eeprom at 52 -at24 1-0052: 512 byte 24c04 EEPROM, writable, 16 bytes/write -sam9x5: ap2 eeprom read failed: -110 -atmel_nand 40000000.nand: Using dma0chan0 for DMA transfers. -ONFI param page 0 valid -ONFI flash detected -NAND device: Manufacturer ID: 0x2c, Chip ID: 0xaa (Micron MT29F2G08ABBEAHC), 256MiB, page size: 2048, OOB size: 64 -atmel_nand 40000000.nand: ONFI params, minimum required ECC: 4 bits in 512 bytes -atmel_nand 40000000.nand: Initialize PMECC params, cap: 4, sector: 512 -Scanning device for bad blocks -9 ofpart partitions found on MTD device atmel_nand -Creating 9 MTD partitions on "atmel_nand": -0x000000000000-0x000010000000 : "NANDFlash" -0x000000000000-0x000000040000 : "at91bootstrap" -0x000000040000-0x0000000c0000 : "u-Boot" -0x0000000c0000-0x000000160000 : "u-Boot Config" -0x000000160000-0x000000200000 : "u-Boot Redundant Config" -0x000000200000-0x000000800000 : "uImage" -0x000000800000-0x000001000000 : "Config" -0x000001000000-0x000001800000 : "OEM Config" -0x000001800000-0x000010000000 : "Rootfs" -tun: Universal TUN/TAP device driver, 1.6 -tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> -libphy: MACB_mii_bus: probed -macb f802c000.ethernet eth0: Cadence MACB at 0xf802c000 irq 23 (00:08:00:10:00:00) -macb f802c000.ethernet eth0: attached PHY driver [Generic PHY] (mii_bus:phy_addr=f802c000.etherne:00, irq=-1) -PPP generic driver version 2.4.2 -PPP BSD Compression module registered -PPP Deflate Compression module registered -ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver -ehci-atmel: EHCI Atmel driver -atmel-ehci 700000.ehci: EHCI Host Controller -atmel-ehci 700000.ehci: new USB bus registered, assigned bus number 1 -atmel-ehci 700000.ehci: irq 31, io mem 0x00700000 -atmel-ehci 700000.ehci: USB 2.0 started, EHCI 1.00 -usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 -usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 -usb usb1: Product: EHCI Host Controller -usb usb1: Manufacturer: Linux 3.12.70 ehci_hcd -usb usb1: SerialNumber: 700000.ehci -hub 1-0:1.0: USB hub found -hub 1-0:1.0: 3 ports detected -ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver -at91_ohci 600000.ohci: AT91 OHCI -at91_ohci 600000.ohci: new USB bus registered, assigned bus number 2 -at91_ohci 600000.ohci: irq 31, io mem 0x00600000 -usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 -usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 -usb usb2: Product: AT91 OHCI -usb usb2: Manufacturer: Linux 3.12.70 ohci_hcd -usb usb2: SerialNumber: at91 -hub 2-0:1.0: USB hub found -hub 2-0:1.0: 3 ports detected -rtc (null): invalid alarm value: 1900-1-1 0:0:0 -at91_rtc fffffeb0.rtc: rtc core: registered fffffeb0.rtc as rtc0 -at91_rtc fffffeb0.rtc: AT91 Real Time Clock driver. -i2c /dev entries driver -at91sam9_wdt: enabled (heartbeat=15 sec, nowayout=0) -Netfilter messages via NETLINK v0.30. -nf_conntrack version 0.5.0 (3964 buckets, 15856 max) -xt_time: kernel timezone is -0000 -ipip: IPv4 over IPv4 tunneling driver -gre: GRE over IPv4 demultiplexor driver -ip_gre: GRE over IPv4 tunneling driver -IPv4 over IPSec tunneling driver -ip_tables: (C) 2000-2006 Netfilter Core Team -TCP: cubic registered -Initializing XFRM netlink socket -NET: Registered protocol family 10 -mip6: Mobile IPv6 -sit: IPv6 over IPv4 tunneling driver -NET: Registered protocol family 17 -NET: Registered protocol family 15 -l2tp_core: L2TP core driver, V2.0 -Key type dns_resolver registered -at91_rtc fffffeb0.rtc: setting system clock to 2018-06-20 20:34:34 UTC (1529526874) -usb 2-3: new full-speed USB device number 2 using at91_ohci -usb 2-3: New USB device found, idVendor=04e2, idProduct=1414 -usb 2-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 -jffs2: notice: (1) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found. -VFS: Mounted root (jffs2 filesystem) readonly on device 31:8. -devtmpfs: mounted -Freeing unused kernel memory: 168K (c057a000 - c05a4000) -INIT: version 2.88 booting -jffs2: notice: (76) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found. -jffs2: notice: (76) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found. -Starting udev -udevd[86]: starting version 3.2 -udevd[87]: starting eudev-3.2 -atmel_spi f0000000.spi: version: 0x212 -atmel_spi f0000000.spi: Using dma0chan1 (tx) and dma0chan2 (rx) for DMA transfers -atmel_spi f0000000.spi: Atmel SPI Controller at 0xf0000000 (irq 28) -atmel_spi f0000000.spi: master is unqueued, this is deprecated -usbcore: registered new interface driver cdc_acm -cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters -vizzini 2-3:1.0: This device cannot do calls on its own. It is not a modem. -vizzini 2-3:1.0: ttyXRUSB0: XR21v14x usb uart device -vizzini 2-3:1.2: This device cannot do calls on its own. It is not a modem. -vizzini 2-3:1.2: ttyXRUSB1: XR21v14x usb uart device -vizzini 2-3:1.4: This device cannot do calls on its own. It is not a modem. -vizzini 2-3:1.4: ttyXRUSB2: XR21v14x usb uart device -vizzini 2-3:1.6: This device cannot do calls on its own. It is not a modem. -vizzini 2-3:1.6: ttyXRUSB3: XR21v14x usb uart device -usbcore: registered new interface driver vizzini -vizzini: Exar USB UART Driver for XR21V141x -atmel_spi f0004000.spi: version: 0x212 -atmel_spi f0004000.spi: Using dma1chan0 (tx) and dma1chan1 (rx) for DMA transfers -atmel_spi f0004000.spi: Atmel SPI Controller at 0xf0004000 (irq 29) -atmel_spi f0004000.spi: master is unqueued, this is deprecated -tmp102 0-0048: initialized -pps_core: LinuxPPS API ver. 1 registered -pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> -pps pps0: new PPS source pps.7.-1 -pps pps0: Registered IRQ 32 as PPS source -atmel_usba_udc 500000.gadget: MMIO registers at 0xf803c000 mapped at d0b5e000 -atmel_usba_udc 500000.gadget: FIFO at 0x00500000 mapped at e1100000 -atmel_mci f0008000.mmc: version: 0x504 -atmel_mci f0008000.mmc: using dma0chan3 for DMA transfers -atmel_mci f0008000.mmc: Atmel MCI controller at 0xf0008000 irq 22, 1 slots -/var/config already mounted -/var/oem already mounted -directory bluetooth operations -directory dnsmasq.d operations -directory modprobe.d operations -mts-io: Loading mts-io module -[INFO] mts-io:mts_io_init:1046: init: v2.1.0 -[INFO] mts-io:mts_id_eeprom_load:853: Pruning radio feature from mts-io -[INFO] mts-io:mts_id_eeprom_load:872: Adding WiFi/BT to mts-io driver -[INFO] mts-io:mts_id_eeprom_load:877: Adding GPS to mts-io driver -[INFO] mts-io:mts_id_eeprom_load:889: detected board MTCDT-0.1 -[INFO] mts-io:mts_id_eeprom_load:960: sizeof: 512 -[INFO] mts-io:mts_id_eeprom_load:961: vendor-id: Multi-Tech Systems -[INFO] mts-io:mts_id_eeprom_load:962: product-id: MTCDT-247L -[INFO] mts-io:mts_id_eeprom_load:963: device-id: 12345678 -[INFO] mts-io:mts_id_eeprom_load:964: hw-version: MTCDT-0.1 -[INFO] mts-io:mts_id_eeprom_load:971: mac-addr: 00:08:00:10:00:00 -[INFO] mts-io:mts_id_eeprom_load:973: imei: 123456789123456789 -[INFO] mts-io:mts_id_eeprom_load:974: capa-gps: yes -[INFO] mts-io:mts_id_eeprom_load:975: capa-din: no -[INFO] mts-io:mts_id_eeprom_load:976: capa-dout: no -[INFO] mts-io:mts_id_eeprom_load:977: capa-adc: no -[INFO] mts-io:mts_id_eeprom_load:978: capa-wifi: yes -[INFO] mts-io:mts_id_eeprom_load:979: capa-bluetooth: yes -[INFO] mts-io:mts_id_eeprom_load:980: capa-lora: no -[INFO] mts-io:mts_id_eeprom_load:989: mac-bluetooth: 00:00:00:00:00:00 -[INFO] mts-io:mts_id_eeprom_load:998: mac-wifi: 00:00:00:00:00:00 -[INFO] mts-io:mts_id_eeprom_load:1005: uuid: AAA00000000000000000000000000021 -[INFO] mts-io:load_port:663: accessory card 1 vendor-id: Multi-Tech Systems -[INFO] mts-io:load_port:664: accessory card 1 product-id: MTAC-LORA-H-915 -[INFO] mts-io:load_port:665: accessory card 1 device-id: P87040004 -[INFO] mts-io:load_port:666: accessory card 1 hw-version: MTAC-LORA-1.5 -[INFO] mts-io:load_port:687: accessory card 1 eui: 00:80:00:00:00:00:00:A4 -[INFO] mts-io:lora_setup:60: loading LORA accessory card in port 1 -[INFO] mts-io:lora_setup:90: created link [lora] to [ap1], success:0 -[INFO] mts-io:lora_setup:126: Substitute pins -[INFO] mts-io:lora_setup:131: LORA H: Replace name AP1_GPIO1 with name AP1_CDONE -[INFO] mts-io:lora_setup:132: LORA H: Replace pin number 70 with number 70 -[INFO] mts-io:lora_setup:131: LORA H: Replace name AP1_GPIO2 with name AP1_CRESET -[INFO] mts-io:lora_setup:132: LORA H: Replace pin number 71 with number 71 -[INFO] mts-io:lora_setup:189: ap_subdirs[port_index=0] = cf0ccca0 ap_subdirs[port_index=0]=bf0d521c -[INFO] mts-io:load_port:622: no accessory card inserted in port 2 -mts-io: Resetting system modules -usb 1-2: new high-speed USB device number 2 using atmel-ehci -usb 1-2: New USB device found, idVendor=0424, idProduct=2534 -usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 -hub 1-2:1.0: USB hub found -hub 1-2:1.0: 4 ports detected -usb 1-2.1: new high-speed USB device number 3 using atmel-ehci -usb 1-2.1: New USB device found, idVendor=0424, idProduct=2534 -usb 1-2.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 -hub 1-2.1:1.0: USB hub found -hub 1-2.1:1.0: 4 ports detected -usb 1-2.2: new high-speed USB device number 4 using atmel-ehci -usb 1-2.2: New USB device found, idVendor=1618, idProduct=9113 -usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=6 -usb 1-2.2: Product: Wireless USB Network Module -usb 1-2.2: Manufacturer: Redpine Signals, Inc. -usb 1-2.2: SerialNumber: 000000000001 -usb 1-2: USB disconnect, device number 2 -usb 1-2.1: USB disconnect, device number 3 -usb 1-2.2: USB disconnect, device number 4 -usb 1-2: new high-speed USB device number 5 using atmel-ehci -usb 1-2: New USB device found, idVendor=0424, idProduct=2534 -usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 -hub 1-2:1.0: USB hub found -hub 1-2:1.0: 4 ports detected -usb 1-2.1: new high-speed USB device number 6 using atmel-ehci -usb 1-2.1: New USB device found, idVendor=0424, idProduct=2534 -usb 1-2.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 -hub 1-2.1:1.0: USB hub found -hub 1-2.1:1.0: 4 ports detected -usb 1-2.2: new high-speed USB device number 7 using atmel-ehci -usb 1-2.2: New USB device found, idVendor=1618, idProduct=9113 -usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=6 -usb 1-2.2: Product: Wireless USB Network Module -usb 1-2.2: Manufacturer: Redpine Signals, Inc. -usb 1-2.2: SerialNumber: 000000000001 -OK -[INFO] ../../git/src/eeprom_main.c:main:580: loaded id eeprom from /sys/bus/i2c/devices/i2c-0/0-0056/eeprom successfully -[INFO] ../../git/src/eeprom_main.c:mts_id_eeprom_inspect:291: sizeof: 512 -[INFO] ../../git/src/eeprom_main.c:mts_id_eeprom_inspect:292: vendor-id: Multi-Tech Systems -[INFO] ../../git/src/eeprom_main.c:mts_id_eeprom_inspect:293: product-id: MTCDT-247L -[INFO] ../../git/src/eeprom_main.c:mts_id_eeprom_inspect:294: device-id: 12345678 -[INFO] ../../git/src/eeprom_main.c:mts_id_eeprom_inspect:295: hw-version: MTCDT-0.1 -[INFO] ../../git/src/eeprom_main.c:mts_id_eeprom_inspect:302: mac-addr: 00:08:00:10:00:00 -[INFO] ../../git/src/eeprom_main.c:mts_id_eeprom_inspect:303: imei: 123456789123456789 -[INFO] ../../git/src/eeprom_main.c:mts_id_eeprom_inspect:304: capa-gps: yes -[INFO] ../../git/src/eeprom_main.c:mts_id_eeprom_inspect:305: capa-din: no -[INFO] ../../git/src/eeprom_main.c:mts_id_eeprom_inspect:306: capa-dout: no -[INFO] ../../git/src/eeprom_main.c:mts_id_eeprom_inspect:307: capa-adc: no -[INFO] ../../git/src/eeprom_main.c:mts_id_eeprom_inspect:308: capa-wifi: yes -[INFO] ../../git/src/eeprom_main.c:mts_id_eeprom_inspect:309: capa-bluetooth: yes -[INFO] ../../git/src/eeprom_main.c:mts_id_eeprom_inspect:310: capa-lora: no -[INFO] ../../git/src/eeprom_main.c:mts_id_eeprom_inspect:318: mac-bluetooth: 00:00:00:00:00:00 -[INFO] ../../git/src/eeprom_main.c:mts_id_eeprom_inspect:325: mac-wifi: 00:00:00:00:00:00 -[INFO] ../../git/src/eeprom_main.c:mts_id_eeprom_inspect:331: uuid: AAA00000000000000000000000000021 -[INFO] ../../git/src/eeprom_main.c:mts_id_eeprom_inspect:341: lora-eui: "00:00:00:00:00:00:00:00" -[INFO] ../../git/src/eeprom_main.c:mts_id_eeprom_inspect:343: lora-product-id: -[INFO] ../../git/src/eeprom_main.c:mts_id_eeprom_inspect:344: lora-hw-version: -Reading accessory cards data -Adding accessory cards data -rs9113: Loading rs9113 modules with COEX=6 and Country=0 -usb 1-2.2: USB disconnect, device number 7 -cfg80211: Calling CRDA to update world regulatory domain -usb 1-2.2: new high-speed USB device number 8 using atmel-ehci -usb 1-2.2: New USB device found, idVendor=1618, idProduct=9113 -usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=6 -usb 1-2.2: Product: Wireless USB Network Module -usb 1-2.2: Manufacturer: Redpine Signals, Inc. -usb 1-2.2: SerialNumber: 000000000001 -Bluetooth: Core ver 2.16 -NET: Registered protocol family 31 -Bluetooth: HCI device and connection manager initialized -Bluetooth: HCI socket layer initialized -Bluetooth: L2CAP socket layer initialized -Bluetooth: SCO socket layer initialized -onebox_wlan_nongpl: module license 'unspecified' taints kernel. -Disabling lock debugging due to kernel taint -usbcore: registered new interface driver Onebox-USB -WLAN protocol selected -BT protocol selected -Driver initialization is done -OK -INIT: Entering runlevel: 5 -Configuring network interfaces... IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready -done. -Starting system message bus: dbus. -Starting ifplugd: Starting /usr/sbin/ifplugd... -done -macb f802c000.ethernet eth0: link up (100/Full) -IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready -Starting OpenBSD Secure Shell server: sshd -done. -Starting bluetooth -Bluetooth: BNEP (Ethernet Emulation) ver 1.3 -Bluetooth: BNEP filters: protocol multicast -Bluetooth: BNEP socket layer initialized -bluetoothd -Would start /usr/sbin/ntpd -u ntp:ntp -p /var/run/ntp.pid -g -c /etc/ntp.conf , and add -20 to the priority. -gpsd_ubx_settime: GPS does not have a fix yet. Try again later. -Starting syslogd/klogd: done -bt-pan: disabled in /etc/default -Starting rfcomm -/usr/sbin/start-stop-daemon -S -p /run/rfcomm.pid -x /usr/bin/python2.7 -b -- /usr/libexec/bluetooth/rfcomm --login |