path: root/scripts/upgrade/log.txt

            _     _                  
  _ __ ___ | |   (_)_ __  _   ___  __
 | '_ ` _ \| |   | | '_ \| | | \ \/ /
 | | | | | | |___| | | | | |_| |>  < 
 |_| |_| |_|_____|_|_| |_|\__,_/_/\_\
                                     
MultiTech Systems mLinux GNU/Linux
mLinux 4.0.0 mtcdt /dev/ttyS0


Version: 4.0.1
Date: 2018-06-12T11:04:17
mtcdt login: mtadm
Password: 
mtcdt:~$ cd /var/volatile
mtcdt:/var/volatile$ ls
log                                  tmp                                  upgrade-mts-io-2.1.0-3.12.70r20.bin
mtcdt:/var/volatile$ sudo -s
Password: 
mtcdt:/var/volatile# mlinux-firmware-upgrade  upgrade-mts-io-2.1.0-3.12.70r20.bin
firmware_upgrade: Checking MD5 for install.sh...
-: OK
firmware_upgrade: Rebooting

Broadcast message from root@mtcdt (ttyS0) (Wed Jun 20 15:33:59 2018):

The system is going down for reboot NOW!
INIT: Switching to runlevel: 6
mtcdt:/var/volatile# INIT: Sending processes the TERM signal
Stopping ifplugd: done
Stopping OpenBSD Secure Shell server: sshdstopped /usr/sbin/sshd (pid 557)
.
Stopping GPS (Global Positioning System) daemon gpsd
monit: disabled in /etc/default
Stopping bluetooth
/usr/libexec/bluetooth/bluetoothd
Stopping system message bus: macb f802c000.ethernet eth0: link down
dbus.
Stopping HOSTAP Daemon: no /usr/sbin/hostapd found; none killed
Stopping ntpd: done
Stopping syslogd/klogd: stopped syslogd (pid 604)
stopped klogd (pid 607)
done
bt-pan: disabled in /etc/default
No /usr/bin/python2.7 found running; none killed.
Stopping 
Stopping lora-network-server: OK
Stopping Mosquitto...
Stopping crond: OK
Gracefully shutting down php-fpm warning, no pid file found - php-fpm is not running ?
lighttpd: disabled in /etc/default
Deconfiguring network interfaces... ifdown: interface eth0 not configured
done.
Sending all processes the TERM signal...
Sending all processes the KILL signal...
Unmounting remote filesystems...
Found /var/volatile/flash-upgrade/upgrade.bin
Checking MD5s
-: OK

Starting flash upgrade from /var/volatile/flash-upgrade/upgrade.bin...
install.sh starting in directory /var/volatile
rootfs / rootfs rw 0 0
/dev/root / jffs2 rw,relatime 0 0
devtmpfs /dev devtmpfs rw,relatime,size=126852k,nr_inodes=31713,mode=755 0 0
proc /proc proc rw,relatime 0 0
sysfs /sys sysfs rw,relatime 0 0
tmpfs /run tmpfs rw,nosuid,nodev,mode=755 0 0
tmpfs /var/volatile tmpfs rw,relatime 0 0
/dev/mtdblock6 /var/config jffs2 rw,relatime 0 0
/dev/mtdblock7 /var/oem jffs2 ro,relatime 0 0
devpts /dev/pts devpts rw,relatime,gid=5,mode=620 0 0
bin    boot   dev    etc    home   lib    media  mnt    opt    proc   run    sbin   sys    tmp    usr    var    www
lrwxrwxrwx    1 root     root             8 Jun 12 12:13 /tmp -> /var/tmp
kernel-module-atmel-mci - 3.12.70-r20.1
Upgradable kernel is installed
-: OK
Update package list ... /usr/bin/opkg -f local.conf update
Downloading file:///var/volatile/flash-upgrade/upgrade-mts-io-2.1.0-3.12.70r20/repo/mtcdt/Packages.gz.
Updated source 'mlinux-mtcdt'.
/usr/bin/opkg -f local.conf install kernel-module-mts-io
Upgrading kernel-module-mts-io from 2.0.4-r0.0-3.12.70r20.0 to 2.1.0-r0.0-3.12.70r20.0 on root.
Installing kernel-module-mts-io (2.1.0-r0.0) on root.
Downloading file:///var/volatile/flash-upgrade/upgrade-mts-io-2.1.0-3.12.70r20/repo/mtcdt/kernel-module-mts-io_2.1.0-r0.0-3.12.70r20.0_mtcdt.ipk.
Configuring kernel-module-mts-io.
Configuring useradd.
PATH=${PATH}:/sbin:/usr/sbin
/usr/bin/opkg -f local.conf install mts-io-noarch
Upgrading mts-io-noarch from 2.0.4-r0.0-3.12.70r20.0 to 2.1.0-r0.0-3.12.70r20.0 on root.
Installing mts-io-noarch (2.1.0-r0.0) on root.
Downloading file:///var/volatile/flash-upgrade/upgrade-mts-io-2.1.0-3.12.70r20/repo/mtcdt/mts-io-noarch_2.1.0-r0.0-3.12.70r20.0_mtcdt.ipk.
mts-io: Unloading mts-io module
[INFO] mts-io:cleanup:1138: cleaning up....
[INFO] mts-io:lora_teardown:203: unloading LORA accessory card in port 1
[INFO] mts-io:mts_io_exit:1221: exiting
OK
mts-io: Unloading mts-io module
OK
update-rc.d: /etc/init.d/mts-io exists during rc.d purge (continuing)
 Removing any system startup links for mts-io ...
  /etc/rcS.d/S39mts-io
update-rc.d: /etc/init.d/mts-io exists during rc.d purge (continuing)
 Removing any system startup links for mts-io ...
Configuring mts-io-noarch.
 Adding system startup for /etc/init.d/mts-io.
mts-io: Unloading mts-io module
OK
mts-io: Loading mts-io module
[INFO] mts-io:mts_io_init:1046: init: v2.1.0
[INFO] mts-io:mts_id_eeprom_load:853: Pruning radio feature from mts-io
[INFO] mts-io:mts_id_eeprom_load:872: Adding WiFi/BT to mts-io driver
[INFO] mts-io:mts_id_eeprom_load:877: Adding GPS to mts-io driver
[INFO] mts-io:mts_id_eeprom_load:889: detected board MTCDT-0.1
[INFO] mts-io:mts_id_eeprom_load:960: sizeof: 512
[INFO] mts-io:mts_id_eeprom_load:961: vendor-id: Multi-Tech Systems
[INFO] mts-io:mts_id_eeprom_load:962: product-id: MTCDT-247L
[INFO] mts-io:mts_id_eeprom_load:963: device-id: 12345678
[INFO] mts-io:mts_id_eeprom_load:964: hw-version: MTCDT-0.1
[INFO] mts-io:mts_id_eeprom_load:971: mac-addr: 00:08:00:10:00:00
[INFO] mts-io:mts_id_eeprom_load:973: imei: 123456789123456789
[INFO] mts-io:mts_id_eeprom_load:974: capa-gps: yes
[INFO] mts-io:mts_id_eeprom_load:975: capa-din: no
[INFO] mts-io:mts_id_eeprom_load:976: capa-dout: no
[INFO] mts-io:mts_id_eeprom_load:977: capa-adc: no
[INFO] mts-io:mts_id_eeprom_load:978: capa-wifi: yes
[INFO] mts-io:mts_id_eeprom_load:979: capa-bluetooth: yes
[INFO] mts-io:mts_id_eeprom_load:980: capa-lora: no
[INFO] mts-io:mts_id_eeprom_load:989: mac-bluetooth: 00:00:00:00:00:00
[INFO] mts-io:mts_id_eeprom_load:998: mac-wifi: 00:00:00:00:00:00
[INFO] mts-io:mts_id_eeprom_load:1005: uuid: AAA00000000000000000000000000021
[INFO] mts-io:load_port:663: accessory card 1 vendor-id: Multi-Tech Systems
[INFO] mts-io:load_port:664: accessory card 1 product-id: MTAC-LORA-H-915
[INFO] mts-io:load_port:665: accessory card 1 device-id: P87040004
[INFO] mts-io:load_port:666: accessory card 1 hw-version: MTAC-LORA-1.5
[INFO] mts-io:load_port:687: accessory card 1 eui: 00:80:00:00:00:00:00:A4
[INFO] mts-io:lora_setup:60: loading LORA accessory card in port 1
[INFO] mts-io:lora_setup:90: created link [lora] to [ap1], success:0
[INFO] mts-io:lora_setup:126: Substitute pins
[INFO] mts-io:lora_setup:131: LORA H: Replace name AP1_GPIO1 with name AP1_CDONE
[INFO] mts-io:lora_setup:132: LORA H: Replace pin number 70 with number 70
[INFO] mts-io:lora_setup:131: LORA H: Replace name AP1_GPIO2 with name AP1_CRESET
[INFO] mts-io:lora_setup:132: LORA H: Replace pin number 71 with number 71
[INFO] mts-io:lora_setup:189: ap_subdirs[port_index=0] = ce97bc60 ap_subdirs[port_index=0]=bf2b921c
[INFO] mts-io:load_port:622: no accessory card inserted in port 2
mts-io: Resetting system modules
usb 1-2.2: USB disconnect, device number 8
usb 1-2.2: new high-speed USB device number 9 using atmel-ehci
usb 1-2.2: New USB device found, idVendor=1618, idProduct=9113
usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=6
usb 1-2.2: Product: Wireless USB Network Module
usb 1-2.2: Manufacturer: Redpine Signals, Inc.
usb 1-2.2: SerialNumber: 000000000001
usb 1-2: USB disconnect, device number 5
usb 1-2.1: USB disconnect, device number 6
usb 1-2.2: USB disconnect, device number 9
usb 1-2: new high-speed USB device number 10 using atmel-ehci
usb 1-2: New USB device found, idVendor=0424, idProduct=2534
usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-2:1.0: USB hub found
hub 1-2:1.0: 4 ports detected
usb 1-2.1: new high-speed USB device number 11 using atmel-ehci
usb 1-2.1: New USB device found, idVendor=0424, idProduct=2534
usb 1-2.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-2.1:1.0: USB hub found
hub 1-2.1:1.0: 4 ports detected
usb 1-2.2: new high-speed USB device number 12 using atmel-ehci
usb 1-2.2: new high-speed USB device number 13 using atmel-ehci
usb 1-2.2: New USB device found, idVendor=1618, idProduct=9113
usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=6
usb 1-2.2: Product: Wireless USB Network Module
usb 1-2.2: Manufacturer: Redpine Signals, Inc.
usb 1-2.2: SerialNumber: 000000000001
OK
Rebooting... reboot: Restarting systemþRomBOOT


AT91Bootstrap 3.5.3-r3 (Tue Jun 12 10:40:06 CDT 2018)

NAND: ONFI flash detected
NAND: Manufacturer ID: 0x2c Chip ID: 0x32
NAND: Disable On-Die ECC
NAND: Initialize PMECC params, cap: 0x4, sector: 0x200
NAND: Image: Copy 0x80000 bytes from 0x40000 to 0x2ef00000
NAND: Done to load image


U-Boot 2016.09.01 (Jun 12 2018 - 10:40:13 -0500)

CPU: AT91SAM9G25
Crystal frequency:       12 MHz
CPU clock        :      400 MHz
Master clock     :  133.333 MHz
       Watchdog enabled
I2C:   ready
DRAM:  256 MiB
WARNING: Caches not enabled
NAND:  256 MiB
MMC:   mci: 0
env_relocate_spec: crc1_ok=0 saved crc=0xffffffff calculated crc=0xf9137807 flags=255
env_relocate_spec: crc2_ok=0 saved crc=0xffffffff calculated crc=0xf9137807 flags=255
*** Warning - bad CRC, using default environment

In:    serial
Out:   serial
Err:   serial
vendor-id:  Multi-Tech Systems
product-id: MTCDT-247L
device-id:  12345678
hw-version: MTCDT-0.1
mac-addr:   00:08:00:10:00:00
Net:   macb0
Hit any key to stop autoboot:  0 

Loading from nand0, offset 0x200000
   Image Name:   mLinux/3.12.70/mtcdt
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    3095397 Bytes = 3 MiB
   Load Address: 20008000
   Entry Point:  20008000
## Booting kernel from Legacy Image at 22000000 ...
   Image Name:   mLinux/3.12.70/mtcdt
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    3095397 Bytes = 3 MiB
   Load Address: 20008000
   Entry Point:  20008000
   Verifying Checksum ... OK
   Loading Kernel Image ... OK

Starting kernel ...

Uncompressing Linux... done, booting the kernel.
Booting Linux on physical CPU 0x0
Linux version 3.12.70 (jenkins@frylock) (gcc version 6.2.0 (GCC) ) #1 PREEMPT Tue Jun 12 10:38:30 CDT 2018
Machine: Atmel AT91SAM (Device Tree), model: Multi-Tech Systems MTCDT
AT91: Detected soc type: at91sam9x5
AT91: Detected soc subtype: at91sam9g25
AT91: sram at 0x300000 of 0x8000 mapped at 0xfef70000
Kernel command line: mem=256M console=ttyS0,115200 root=/dev/mtdblock8 ro rootfstype=jffs2
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
    vmalloc : 0xd0800000 - 0xff000000   ( 744 MB)
    lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
    modules : 0xbf000000 - 0xc0000000   (  16 MB)
      .text : 0xc0008000 - 0xc0579324   (5573 kB)
      .init : 0xc057a000 - 0xc05a4f84   ( 172 kB)
      .data : 0xc05a6000 - 0xc05d1720   ( 174 kB)
       .bss : 0xc05d172c - 0xc05f1d3c   ( 130 kB)
Preemptible hierarchical RCU implementation.
NR_IRQS:16 nr_irqs:16 16
sched_clock: 32 bits at 100 Hz, resolution 10000000ns, wraps every 4294967286ms
Calibrating delay loop... 199.06 BogoMIPS (lpj=995328)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
Initializing cgroup subsys blkio
CPU: Testing write buffer coherency: ok
Setting up static identity map for 0xc0420670 - 0xc04206c8
devtmpfs: initialized
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
AT91: Power Management (with slow clock mode)
AT91: Starting after software reset
gpio-at91 fffff400.gpio: at address fefff400
gpio-at91 fffff600.gpio: at address fefff600
gpio-at91 fffff800.gpio: at address fefff800
gpio-at91 fffffa00.gpio: at address fefffa00
pinctrl-at91 pinctrl.2: initialized AT91 pinctrl driver
bio: create slab <bio-0> at 0
at_hdmac ffffec00.dma-controller: Atmel AHB DMA Controller ( cpy slave ), 8 channels
at_hdmac ffffee00.dma-controller: Atmel AHB DMA Controller ( cpy slave ), 8 channels
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
i2c-gpio i2c.3: using pins 30 (SDA) and 31 (SCL)
i2c-gpio i2c.4: using pins 64 (SDA) and 65 (SCL)
Switched to clocksource tcb_clksrc
NET: Registered protocol family 2
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP: reno registered
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
ROMFS MTD (C) 2007 Red Hat, Inc.
msgmni has been set to 495
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered (default)
io scheduler deadline registered
io scheduler cfq registered
fffff200.serial: ttyS0 at MMIO 0xfffff200 (irq = 16, base_baud = 8333333) is a ATMEL_SERIAL
console [ttyS0] enabled
f8040000.serial: ttyS1 at MMIO 0xf8040000 (irq = 26, base_baud = 8333333) is a ATMEL_SERIAL
brd: module loaded
loop: module loaded
at24_get_setup: found a match for eeprom at 56
at24 0-0056: 512 byte 24c04 EEPROM, writable, 16 bytes/write
sam9x5: read 512 bytes from id eeprom
at24_get_setup: found a match for eeprom at 50
at24 1-0050: 512 byte 24c04 EEPROM, writable, 16 bytes/write
sam9x5: read 512 bytes from ap1 eeprom
at24_get_setup: found a match for eeprom at 52
at24 1-0052: 512 byte 24c04 EEPROM, writable, 16 bytes/write
sam9x5: ap2 eeprom read failed: -110
atmel_nand 40000000.nand: Using dma0chan0 for DMA transfers.
ONFI param page 0 valid
ONFI flash detected
NAND device: Manufacturer ID: 0x2c, Chip ID: 0xaa (Micron MT29F2G08ABBEAHC), 256MiB, page size: 2048, OOB size: 64
atmel_nand 40000000.nand: ONFI params, minimum required ECC: 4 bits in 512 bytes
atmel_nand 40000000.nand: Initialize PMECC params, cap: 4, sector: 512
Scanning device for bad blocks
9 ofpart partitions found on MTD device atmel_nand
Creating 9 MTD partitions on "atmel_nand":
0x000000000000-0x000010000000 : "NANDFlash"
0x000000000000-0x000000040000 : "at91bootstrap"
0x000000040000-0x0000000c0000 : "u-Boot"
0x0000000c0000-0x000000160000 : "u-Boot Config"
0x000000160000-0x000000200000 : "u-Boot Redundant Config"
0x000000200000-0x000000800000 : "uImage"
0x000000800000-0x000001000000 : "Config"
0x000001000000-0x000001800000 : "OEM Config"
0x000001800000-0x000010000000 : "Rootfs"
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
libphy: MACB_mii_bus: probed
macb f802c000.ethernet eth0: Cadence MACB at 0xf802c000 irq 23 (00:08:00:10:00:00)
macb f802c000.ethernet eth0: attached PHY driver [Generic PHY] (mii_bus:phy_addr=f802c000.etherne:00, irq=-1)
PPP generic driver version 2.4.2
PPP BSD Compression module registered
PPP Deflate Compression module registered
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-atmel: EHCI Atmel driver
atmel-ehci 700000.ehci: EHCI Host Controller
atmel-ehci 700000.ehci: new USB bus registered, assigned bus number 1
atmel-ehci 700000.ehci: irq 31, io mem 0x00700000
atmel-ehci 700000.ehci: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.12.70 ehci_hcd
usb usb1: SerialNumber: 700000.ehci
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
at91_ohci 600000.ohci: AT91 OHCI
at91_ohci 600000.ohci: new USB bus registered, assigned bus number 2
at91_ohci 600000.ohci: irq 31, io mem 0x00600000
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: AT91 OHCI
usb usb2: Manufacturer: Linux 3.12.70 ohci_hcd
usb usb2: SerialNumber: at91
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
rtc (null): invalid alarm value: 1900-1-1 0:0:0
at91_rtc fffffeb0.rtc: rtc core: registered fffffeb0.rtc as rtc0
at91_rtc fffffeb0.rtc: AT91 Real Time Clock driver.
i2c /dev entries driver
at91sam9_wdt: enabled (heartbeat=15 sec, nowayout=0)
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (3964 buckets, 15856 max)
xt_time: kernel timezone is -0000
ipip: IPv4 over IPv4 tunneling driver
gre: GRE over IPv4 demultiplexor driver
ip_gre: GRE over IPv4 tunneling driver
IPv4 over IPSec tunneling driver
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP: cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 10
mip6: Mobile IPv6
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
NET: Registered protocol family 15
l2tp_core: L2TP core driver, V2.0
Key type dns_resolver registered
at91_rtc fffffeb0.rtc: setting system clock to 2018-06-20 20:34:34 UTC (1529526874)
usb 2-3: new full-speed USB device number 2 using at91_ohci
usb 2-3: New USB device found, idVendor=04e2, idProduct=1414
usb 2-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
jffs2: notice: (1) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
VFS: Mounted root (jffs2 filesystem) readonly on device 31:8.
devtmpfs: mounted
Freeing unused kernel memory: 168K (c057a000 - c05a4000)
INIT: version 2.88 booting
jffs2: notice: (76) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
jffs2: notice: (76) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
Starting udev
udevd[86]: starting version 3.2
udevd[87]: starting eudev-3.2
atmel_spi f0000000.spi: version: 0x212
atmel_spi f0000000.spi: Using dma0chan1 (tx) and dma0chan2 (rx) for DMA transfers
atmel_spi f0000000.spi: Atmel SPI Controller at 0xf0000000 (irq 28)
atmel_spi f0000000.spi: master is unqueued, this is deprecated
usbcore: registered new interface driver cdc_acm
cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
vizzini 2-3:1.0: This device cannot do calls on its own. It is not a modem.
vizzini 2-3:1.0: ttyXRUSB0: XR21v14x usb uart device
vizzini 2-3:1.2: This device cannot do calls on its own. It is not a modem.
vizzini 2-3:1.2: ttyXRUSB1: XR21v14x usb uart device
vizzini 2-3:1.4: This device cannot do calls on its own. It is not a modem.
vizzini 2-3:1.4: ttyXRUSB2: XR21v14x usb uart device
vizzini 2-3:1.6: This device cannot do calls on its own. It is not a modem.
vizzini 2-3:1.6: ttyXRUSB3: XR21v14x usb uart device
usbcore: registered new interface driver vizzini
vizzini: Exar USB UART Driver for XR21V141x 
atmel_spi f0004000.spi: version: 0x212
atmel_spi f0004000.spi: Using dma1chan0 (tx) and dma1chan1 (rx) for DMA transfers
atmel_spi f0004000.spi: Atmel SPI Controller at 0xf0004000 (irq 29)
atmel_spi f0004000.spi: master is unqueued, this is deprecated
tmp102 0-0048: initialized
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
pps pps0: new PPS source pps.7.-1
pps pps0: Registered IRQ 32 as PPS source
atmel_usba_udc 500000.gadget: MMIO registers at 0xf803c000 mapped at d0b5e000
atmel_usba_udc 500000.gadget: FIFO at 0x00500000 mapped at e1100000
atmel_mci f0008000.mmc: version: 0x504
atmel_mci f0008000.mmc: using dma0chan3 for DMA transfers
atmel_mci f0008000.mmc: Atmel MCI controller at 0xf0008000 irq 22, 1 slots
/var/config already mounted
/var/oem already mounted
directory bluetooth operations
directory dnsmasq.d operations
directory modprobe.d operations
mts-io: Loading mts-io module
[INFO] mts-io:mts_io_init:1046: init: v2.1.0
[INFO] mts-io:mts_id_eeprom_load:853: Pruning radio feature from mts-io
[INFO] mts-io:mts_id_eeprom_load:872: Adding WiFi/BT to mts-io driver
[INFO] mts-io:mts_id_eeprom_load:877: Adding GPS to mts-io driver
[INFO] mts-io:mts_id_eeprom_load:889: detected board MTCDT-0.1
[INFO] mts-io:mts_id_eeprom_load:960: sizeof: 512
[INFO] mts-io:mts_id_eeprom_load:961: vendor-id: Multi-Tech Systems
[INFO] mts-io:mts_id_eeprom_load:962: product-id: MTCDT-247L
[INFO] mts-io:mts_id_eeprom_load:963: device-id: 12345678
[INFO] mts-io:mts_id_eeprom_load:964: hw-version: MTCDT-0.1
[INFO] mts-io:mts_id_eeprom_load:971: mac-addr: 00:08:00:10:00:00
[INFO] mts-io:mts_id_eeprom_load:973: imei: 123456789123456789
[INFO] mts-io:mts_id_eeprom_load:974: capa-gps: yes
[INFO] mts-io:mts_id_eeprom_load:975: capa-din: no
[INFO] mts-io:mts_id_eeprom_load:976: capa-dout: no
[INFO] mts-io:mts_id_eeprom_load:977: capa-adc: no
[INFO] mts-io:mts_id_eeprom_load:978: capa-wifi: yes
[INFO] mts-io:mts_id_eeprom_load:979: capa-bluetooth: yes
[INFO] mts-io:mts_id_eeprom_load:980: capa-lora: no
[INFO] mts-io:mts_id_eeprom_load:989: mac-bluetooth: 00:00:00:00:00:00
[INFO] mts-io:mts_id_eeprom_load:998: mac-wifi: 00:00:00:00:00:00
[INFO] mts-io:mts_id_eeprom_load:1005: uuid: AAA00000000000000000000000000021
[INFO] mts-io:load_port:663: accessory card 1 vendor-id: Multi-Tech Systems
[INFO] mts-io:load_port:664: accessory card 1 product-id: MTAC-LORA-H-915
[INFO] mts-io:load_port:665: accessory card 1 device-id: P87040004
[INFO] mts-io:load_port:666: accessory card 1 hw-version: MTAC-LORA-1.5
[INFO] mts-io:load_port:687: accessory card 1 eui: 00:80:00:00:00:00:00:A4
[INFO] mts-io:lora_setup:60: loading LORA accessory card in port 1
[INFO] mts-io:lora_setup:90: created link [lora] to [ap1], success:0
[INFO] mts-io:lora_setup:126: Substitute pins
[INFO] mts-io:lora_setup:131: LORA H: Replace name AP1_GPIO1 with name AP1_CDONE
[INFO] mts-io:lora_setup:132: LORA H: Replace pin number 70 with number 70
[INFO] mts-io:lora_setup:131: LORA H: Replace name AP1_GPIO2 with name AP1_CRESET
[INFO] mts-io:lora_setup:132: LORA H: Replace pin number 71 with number 71
[INFO] mts-io:lora_setup:189: ap_subdirs[port_index=0] = cf0ccca0 ap_subdirs[port_index=0]=bf0d521c
[INFO] mts-io:load_port:622: no accessory card inserted in port 2
mts-io: Resetting system modules
usb 1-2: new high-speed USB device number 2 using atmel-ehci
usb 1-2: New USB device found, idVendor=0424, idProduct=2534
usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-2:1.0: USB hub found
hub 1-2:1.0: 4 ports detected
usb 1-2.1: new high-speed USB device number 3 using atmel-ehci
usb 1-2.1: New USB device found, idVendor=0424, idProduct=2534
usb 1-2.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-2.1:1.0: USB hub found
hub 1-2.1:1.0: 4 ports detected
usb 1-2.2: new high-speed USB device number 4 using atmel-ehci
usb 1-2.2: New USB device found, idVendor=1618, idProduct=9113
usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=6
usb 1-2.2: Product: Wireless USB Network Module
usb 1-2.2: Manufacturer: Redpine Signals, Inc.
usb 1-2.2: SerialNumber: 000000000001
usb 1-2: USB disconnect, device number 2
usb 1-2.1: USB disconnect, device number 3
usb 1-2.2: USB disconnect, device number 4
usb 1-2: new high-speed USB device number 5 using atmel-ehci
usb 1-2: New USB device found, idVendor=0424, idProduct=2534
usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-2:1.0: USB hub found
hub 1-2:1.0: 4 ports detected
usb 1-2.1: new high-speed USB device number 6 using atmel-ehci
usb 1-2.1: New USB device found, idVendor=0424, idProduct=2534
usb 1-2.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-2.1:1.0: USB hub found
hub 1-2.1:1.0: 4 ports detected
usb 1-2.2: new high-speed USB device number 7 using atmel-ehci
usb 1-2.2: New USB device found, idVendor=1618, idProduct=9113
usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=6
usb 1-2.2: Product: Wireless USB Network Module
usb 1-2.2: Manufacturer: Redpine Signals, Inc.
usb 1-2.2: SerialNumber: 000000000001
OK
[INFO] ../../git/src/eeprom_main.c:main:580: loaded id eeprom from /sys/bus/i2c/devices/i2c-0/0-0056/eeprom successfully
[INFO] ../../git/src/eeprom_main.c:mts_id_eeprom_inspect:291: sizeof: 512
[INFO] ../../git/src/eeprom_main.c:mts_id_eeprom_inspect:292: vendor-id: Multi-Tech Systems
[INFO] ../../git/src/eeprom_main.c:mts_id_eeprom_inspect:293: product-id: MTCDT-247L
[INFO] ../../git/src/eeprom_main.c:mts_id_eeprom_inspect:294: device-id: 12345678
[INFO] ../../git/src/eeprom_main.c:mts_id_eeprom_inspect:295: hw-version: MTCDT-0.1
[INFO] ../../git/src/eeprom_main.c:mts_id_eeprom_inspect:302: mac-addr: 00:08:00:10:00:00
[INFO] ../../git/src/eeprom_main.c:mts_id_eeprom_inspect:303: imei: 123456789123456789
[INFO] ../../git/src/eeprom_main.c:mts_id_eeprom_inspect:304: capa-gps: yes
[INFO] ../../git/src/eeprom_main.c:mts_id_eeprom_inspect:305: capa-din: no
[INFO] ../../git/src/eeprom_main.c:mts_id_eeprom_inspect:306: capa-dout: no
[INFO] ../../git/src/eeprom_main.c:mts_id_eeprom_inspect:307: capa-adc: no
[INFO] ../../git/src/eeprom_main.c:mts_id_eeprom_inspect:308: capa-wifi: yes
[INFO] ../../git/src/eeprom_main.c:mts_id_eeprom_inspect:309: capa-bluetooth: yes
[INFO] ../../git/src/eeprom_main.c:mts_id_eeprom_inspect:310: capa-lora: no
[INFO] ../../git/src/eeprom_main.c:mts_id_eeprom_inspect:318: mac-bluetooth: 00:00:00:00:00:00
[INFO] ../../git/src/eeprom_main.c:mts_id_eeprom_inspect:325: mac-wifi: 00:00:00:00:00:00
[INFO] ../../git/src/eeprom_main.c:mts_id_eeprom_inspect:331: uuid: AAA00000000000000000000000000021
[INFO] ../../git/src/eeprom_main.c:mts_id_eeprom_inspect:341: lora-eui: "00:00:00:00:00:00:00:00"
[INFO] ../../git/src/eeprom_main.c:mts_id_eeprom_inspect:343: lora-product-id: 
[INFO] ../../git/src/eeprom_main.c:mts_id_eeprom_inspect:344: lora-hw-version: 
Reading accessory cards data
Adding accessory cards data
rs9113: Loading rs9113 modules with COEX=6 and Country=0
usb 1-2.2: USB disconnect, device number 7
cfg80211: Calling CRDA to update world regulatory domain
usb 1-2.2: new high-speed USB device number 8 using atmel-ehci
usb 1-2.2: New USB device found, idVendor=1618, idProduct=9113
usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=6
usb 1-2.2: Product: Wireless USB Network Module
usb 1-2.2: Manufacturer: Redpine Signals, Inc.
usb 1-2.2: SerialNumber: 000000000001
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
onebox_wlan_nongpl: module license 'unspecified' taints kernel.
Disabling lock debugging due to kernel taint
usbcore: registered new interface driver Onebox-USB
WLAN protocol selected
BT protocol selected
Driver initialization is done
OK
INIT: Entering runlevel: 5
Configuring network interfaces... IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
done.
Starting system message bus: dbus.
Starting ifplugd: Starting /usr/sbin/ifplugd...
done
macb f802c000.ethernet eth0: link up (100/Full)
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Starting OpenBSD Secure Shell server: sshd
done.
Starting bluetooth
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
bluetoothd
Would start /usr/sbin/ntpd -u ntp:ntp -p /var/run/ntp.pid -g -c /etc/ntp.conf , and add -20 to the priority.
gpsd_ubx_settime: GPS does not have a fix yet.  Try again later.
Starting syslogd/klogd: done
bt-pan: disabled in /etc/default
Starting rfcomm
/usr/sbin/start-stop-daemon -S -p /run/rfcomm.pid -x /usr/bin/python2.7 -b -- /usr/libexec/bluetooth/rfcomm --login