1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
|
Index: at91bootstrap-3.5.2/board/at91sam9x5ek/at91sam9x5eknf_uboot_defconfig
===================================================================
--- at91bootstrap-3.5.2.orig/board/at91sam9x5ek/at91sam9x5eknf_uboot_defconfig 2013-01-30 04:01:20.000000000 -0600
+++ at91bootstrap-3.5.2/board/at91sam9x5ek/at91sam9x5eknf_uboot_defconfig 2013-02-08 16:44:22.759998432 -0600
@@ -42,7 +42,8 @@
ALLOW_PIO3=y
CONFIG_HAS_PIO3=y
CPU_HAS_PMECC=y
-CONFIG_LOAD_ONE_WIRE=y
+# MTS: don't load one wire
+# CONFIG_LOAD_ONE_WIRE is not set
#
# Memory selection
@@ -102,4 +103,5 @@
# CONFIG_USER_HW_INIT is not set
CONFIG_THUMB=y
CONFIG_SCLK=y
-CONFIG_DISABLE_WATCHDOG=y
+# MTS: don't disable watchdog
+# CONFIG_DISABLE_WATCHDOG is not set
Index: at91bootstrap-3.5.2/board/at91sam9x5ek/at91sam9x5ek.h
===================================================================
--- at91bootstrap-3.5.2.orig/board/at91sam9x5ek/at91sam9x5ek.h 2013-01-30 04:01:20.000000000 -0600
+++ at91bootstrap-3.5.2/board/at91sam9x5ek/at91sam9x5ek.h 2013-02-08 16:44:22.759998432 -0600
@@ -95,7 +95,8 @@
#define CONFIG_SYS_NAND_CLE_PIN AT91C_PIN_PD(3)
#define CONFIG_SYS_NAND_ENABLE_PIN AT91C_PIN_PD(4)
-#define PMECC_ERROR_CORR_BITS 2
+/* MTS: use 4-bit PMECC */
+#define PMECC_ERROR_CORR_BITS 4
#define PMECC_SECTOR_SIZE 512
#define CONFIG_LOOKUP_TABLE_ALPHA_OFFSET 0xC000
Index: at91bootstrap-3.5.2/board/at91sam9x5ek/at91sam9x5ek.c
===================================================================
--- at91bootstrap-3.5.2.orig/board/at91sam9x5ek/at91sam9x5ek.c 2013-01-30 04:01:20.000000000 -0600
+++ at91bootstrap-3.5.2/board/at91sam9x5ek/at91sam9x5ek.c 2013-02-08 16:46:23.260086935 -0600
@@ -268,10 +268,8 @@
reg = readl(AT91C_BASE_CCFG + CCFG_EBICSA);
reg |= AT91C_EBI_CS3A_SM;
- if ((get_cm_rev() == 'A') && (get_cm_vendor() == VENDOR_EMBEST))
- reg &= ~AT91C_EBI_NFD0_ON_D16;
- else
- reg |= (AT91C_EBI_DDR_MP_EN | AT91C_EBI_NFD0_ON_D16);
+ /* MTR */
+ reg |= (AT91C_EBI_DDR_MP_EN | AT91C_EBI_NFD0_ON_D16);
reg &= ~AT91C_EBI_DRV;
writel(reg, AT91C_BASE_CCFG + CCFG_EBICSA);
@@ -300,10 +298,7 @@
| AT91_SMC_TDF_(1)),
AT91C_BASE_SMC + SMC_CTRL3);
- /* Configure the PIO controller */
- if ((get_cm_rev() == 'A') && (get_cm_vendor() == VENDOR_EMBEST))
- pio_configure(nand_pins_lo);
- else
+ /* MTR2 */
pio_configure(nand_pins_hi);
writel((1 << AT91C_ID_PIOC_D), (PMC_PCER + AT91C_BASE_PMC));
|
