diff options
Diffstat (limited to 'multitech/recipes/linux/linux-2.6.32/mtcdp-embedded')
9 files changed, 3319 insertions, 0 deletions
diff --git a/multitech/recipes/linux/linux-2.6.32/mtcdp-embedded/defconfig b/multitech/recipes/linux/linux-2.6.32/mtcdp-embedded/defconfig new file mode 100644 index 0000000..926d006 --- /dev/null +++ b/multitech/recipes/linux/linux-2.6.32/mtcdp-embedded/defconfig @@ -0,0 +1,1644 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.32.3 +# Tue Oct 12 09:57:09 2010 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set +# CONFIG_RELAY is not set +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +# CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y + +# +# Kernel Performance Events And Counters +# +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_CLK=y + +# +# GCOV-based kernel profiling +# +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_BLOCK=y +CONFIG_LBDAF=y +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_FREEZER=y + +# +# System Type +# +CONFIG_MMU=y +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +CONFIG_ARCH_AT91=y +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_GEMINI is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_STMP3XXX is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_NOMADIK is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_W90X900 is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_S5PC1XX is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_U300 is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_BCMRING is not set + +# +# Atmel AT91 System-on-Chip +# +# CONFIG_ARCH_AT91RM9200 is not set +# CONFIG_ARCH_AT91SAM9260 is not set +# CONFIG_ARCH_AT91SAM9261 is not set +# CONFIG_ARCH_AT91SAM9G10 is not set +# CONFIG_ARCH_AT91SAM9263 is not set +# CONFIG_ARCH_AT91SAM9RL is not set +CONFIG_ARCH_AT91SAM9G20=y +# CONFIG_ARCH_AT91SAM9G45 is not set +# CONFIG_ARCH_AT91CAP9 is not set +# CONFIG_ARCH_AT91X40 is not set +CONFIG_AT91_PMC_UNIT=y + +# +# AT91SAM9G20 Board Type +# +CONFIG_MACH_AT91SAM9G20EK=y +# CONFIG_MACH_AT91SAM9G20EK_2MMC is not set +# CONFIG_MACH_CPU9G20 is not set + +# +# AT91 Board Options +# +CONFIG_MTD_AT91_DATAFLASH_CARD=y +# CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16 is not set + +# +# AT91 Feature Selections +# +CONFIG_AT91_PROGRAMMABLE_CLOCKS=y +CONFIG_AT91_SLOW_CLOCK=y +CONFIG_AT91_TIMER_HZ=100 +CONFIG_AT91_EARLY_DBGU=y +# CONFIG_AT91_EARLY_USART0 is not set +# CONFIG_AT91_EARLY_USART1 is not set +# CONFIG_AT91_EARLY_USART2 is not set +# CONFIG_AT91_EARLY_USART3 is not set +# CONFIG_AT91_EARLY_USART4 is not set +# CONFIG_AT91_EARLY_USART5 is not set + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM926T=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5TJ=y +CONFIG_CPU_PABRT_LEGACY=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +# CONFIG_ARM_THUMB is not set +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set +# CONFIG_CPU_CACHE_ROUND_ROBIN is not set +CONFIG_ARM_L1_CACHE_SHIFT=5 + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_TICK_ONESHOT=y +# CONFIG_NO_HZ is not set +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +# CONFIG_PREEMPT_NONE is not set +# CONFIG_PREEMPT_VOLUNTARY is not set +CONFIG_PREEMPT=y +CONFIG_HZ=100 +CONFIG_AEABI=y +# CONFIG_OABI_COMPAT is not set +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +# CONFIG_LEDS is not set +CONFIG_ALIGNMENT_TRAP=y +# CONFIG_UACCESS_WITH_MEMCPY is not set + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE=" quiet " +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Power Management +# +# CONFIG_CPU_IDLE is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +# CONFIG_VFP is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_DEBUG is not set +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y +# CONFIG_APM_EMULATION is not set +# CONFIG_PM_RUNTIME is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y +CONFIG_NET_IPIP=y +CONFIG_NET_IPGRE=y +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +CONFIG_INET_TUNNEL=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +CONFIG_NETFILTER_ADVANCED=y + +# +# Core Netfilter Configuration +# +CONFIG_NETFILTER_NETLINK=y +CONFIG_NETFILTER_NETLINK_QUEUE=y +CONFIG_NETFILTER_NETLINK_LOG=y +CONFIG_NF_CONNTRACK=y +CONFIG_NF_CT_ACCT=y +CONFIG_NF_CONNTRACK_MARK=y +CONFIG_NF_CONNTRACK_EVENTS=y +# CONFIG_NF_CT_PROTO_DCCP is not set +# CONFIG_NF_CT_PROTO_SCTP is not set +# CONFIG_NF_CT_PROTO_UDPLITE is not set +# CONFIG_NF_CONNTRACK_AMANDA is not set +CONFIG_NF_CONNTRACK_FTP=y +CONFIG_NF_CONNTRACK_H323=y +# CONFIG_NF_CONNTRACK_IRC is not set +# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set +# CONFIG_NF_CONNTRACK_PPTP is not set +# CONFIG_NF_CONNTRACK_SANE is not set +# CONFIG_NF_CONNTRACK_SIP is not set +# CONFIG_NF_CONNTRACK_TFTP is not set +# CONFIG_NF_CT_NETLINK is not set +# CONFIG_NETFILTER_TPROXY is not set +CONFIG_NETFILTER_XTABLES=y +CONFIG_NETFILTER_XT_TARGET_CLASSIFY=y +# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set +# CONFIG_NETFILTER_XT_TARGET_DSCP is not set +# CONFIG_NETFILTER_XT_TARGET_HL is not set +# CONFIG_NETFILTER_XT_TARGET_LED is not set +CONFIG_NETFILTER_XT_TARGET_MARK=y +# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set +CONFIG_NETFILTER_XT_TARGET_NFQUEUE=y +# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set +# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set +# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set +# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set +# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set +# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set +# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set +CONFIG_NETFILTER_XT_MATCH_CONNMARK=y +CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y +# CONFIG_NETFILTER_XT_MATCH_DCCP is not set +# CONFIG_NETFILTER_XT_MATCH_DSCP is not set +# CONFIG_NETFILTER_XT_MATCH_ESP is not set +# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set +# CONFIG_NETFILTER_XT_MATCH_HELPER is not set +CONFIG_NETFILTER_XT_MATCH_HL=y +# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set +# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set +# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set +# CONFIG_NETFILTER_XT_MATCH_MAC is not set +# CONFIG_NETFILTER_XT_MATCH_MARK is not set +# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set +# CONFIG_NETFILTER_XT_MATCH_OWNER is not set +# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set +# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set +# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set +# CONFIG_NETFILTER_XT_MATCH_REALM is not set +# CONFIG_NETFILTER_XT_MATCH_RECENT is not set +# CONFIG_NETFILTER_XT_MATCH_SCTP is not set +CONFIG_NETFILTER_XT_MATCH_STATE=y +# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set +# CONFIG_NETFILTER_XT_MATCH_STRING is not set +# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set +# CONFIG_NETFILTER_XT_MATCH_TIME is not set +# CONFIG_NETFILTER_XT_MATCH_U32 is not set +# CONFIG_NETFILTER_XT_MATCH_OSF is not set +# CONFIG_IP_VS is not set + +# +# IP: Netfilter Configuration +# +CONFIG_NF_DEFRAG_IPV4=y +CONFIG_NF_CONNTRACK_IPV4=y +CONFIG_NF_CONNTRACK_PROC_COMPAT=y +# CONFIG_IP_NF_QUEUE is not set +CONFIG_IP_NF_IPTABLES=y +CONFIG_IP_NF_MATCH_ADDRTYPE=y +# CONFIG_IP_NF_MATCH_AH is not set +CONFIG_IP_NF_MATCH_ECN=y +CONFIG_IP_NF_MATCH_TTL=y +CONFIG_IP_NF_FILTER=y +CONFIG_IP_NF_TARGET_REJECT=y +CONFIG_IP_NF_TARGET_LOG=y +# CONFIG_IP_NF_TARGET_ULOG is not set +CONFIG_NF_NAT=y +CONFIG_NF_NAT_NEEDED=y +CONFIG_IP_NF_TARGET_MASQUERADE=y +CONFIG_IP_NF_TARGET_NETMAP=y +CONFIG_IP_NF_TARGET_REDIRECT=y +# CONFIG_NF_NAT_SNMP_BASIC is not set +CONFIG_NF_NAT_FTP=y +# CONFIG_NF_NAT_IRC is not set +# CONFIG_NF_NAT_TFTP is not set +# CONFIG_NF_NAT_AMANDA is not set +# CONFIG_NF_NAT_PPTP is not set +CONFIG_NF_NAT_H323=y +# CONFIG_NF_NAT_SIP is not set +CONFIG_IP_NF_MANGLE=y +# CONFIG_IP_NF_TARGET_CLUSTERIP is not set +# CONFIG_IP_NF_TARGET_ECN is not set +# CONFIG_IP_NF_TARGET_TTL is not set +# CONFIG_IP_NF_RAW is not set +# CONFIG_IP_NF_ARPTABLES is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set +# CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +CONFIG_MTD_DATAFLASH=y +# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set +# CONFIG_MTD_DATAFLASH_OTP is not set +CONFIG_MTD_M25P80=y +# CONFIG_M25PXX_USE_FAST_READ is not set +# CONFIG_MTD_SST25L is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +# CONFIG_MTD_NAND_GPIO is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +CONFIG_MTD_NAND_ATMEL=y +# CONFIG_MTD_NAND_ATMEL_ECC_HW is not set +CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y +# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set +# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ALAUDA is not set +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=32768 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_MG_DISK is not set +CONFIG_MISC_DEVICES=y +CONFIG_ATMEL_TCLIB=y +CONFIG_ATMEL_TCB_CLKSRC=y +CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0 +# CONFIG_ICS932S401 is not set +CONFIG_ATMEL_SSC=y +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_ISL29003 is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +CONFIG_EEPROM_AT24=y +CONFIG_EEPROM_AT25=y +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set +# CONFIG_EEPROM_93CX6 is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set +CONFIG_SCSI_MULTI_LUN=y +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +CONFIG_MACB=y +# CONFIG_AX88796 is not set +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set +# CONFIG_ENC28J60 is not set +# CONFIG_ETHOC is not set +# CONFIG_SMC911X is not set +# CONFIG_SMSC911X is not set +# CONFIG_DNET is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851 is not set +# CONFIG_KS8851_MLL is not set +CONFIG_NETDEV_1000=y +CONFIG_NETDEV_10000=y +CONFIG_WLAN=y +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +CONFIG_PPP=y +# CONFIG_PPP_MULTILINK is not set +# CONFIG_PPP_FILTER is not set +CONFIG_PPP_ASYNC=y +# CONFIG_PPP_SYNC_TTY is not set +CONFIG_PPP_DEFLATE=y +CONFIG_PPP_BSDCOMP=y +# CONFIG_PPP_MPPE is not set +# CONFIG_PPPOE is not set +# CONFIG_PPPOL2TP is not set +# CONFIG_SLIP is not set +CONFIG_SLHC=y +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_ATMEL=y +CONFIG_SERIAL_ATMEL_CONSOLE=y +CONFIG_SERIAL_ATMEL_PDC=y +# CONFIG_SERIAL_ATMEL_TTYAT is not set +# CONFIG_SERIAL_MAX3100 is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y +CONFIG_I2C_ALGOBIT=y + +# +# I2C Hardware Bus support +# + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_DESIGNWARE is not set +CONFIG_I2C_GPIO=y +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +CONFIG_SPI_ATMEL=y +# CONFIG_SPI_BITBANG is not set +# CONFIG_SPI_GPIO is not set + +# +# SPI Protocol Masters +# +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_TLE62X0 is not set + +# +# PPS support +# +# CONFIG_PPS is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +# CONFIG_GPIO_SYSFS is not set + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_GPIO_MAX7301 is not set +# CONFIG_GPIO_MCP23S08 is not set +# CONFIG_GPIO_MC33880 is not set + +# +# AC97 GPIO expanders: +# +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_NOWAYOUT=y + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_AT91SAM9X_WATCHDOG=y + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_TPS65010 is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set +# CONFIG_MFD_MC13783 is not set +# CONFIG_AB3100_CORE is not set +# CONFIG_EZX_PCAP is not set +# CONFIG_REGULATOR is not set +# CONFIG_MEDIA_SUPPORT is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +# CONFIG_SOUND is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HIDRAW is not set + +# +# USB Input Devices +# +# CONFIG_USB_HID is not set +# CONFIG_HID_PID is not set + +# +# Special HID drivers +# +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +CONFIG_USB_ANNOUNCE_NEW_DEVICES=y + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_SUSPEND is not set +# CONFIG_USB_OTG is not set +CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_OXU210HP_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_HWA_HCD is not set +# CONFIG_USB_MUSB_HDRC is not set +# CONFIG_USB_GADGET_MUSB_HDRC is not set + +# +# USB Device Class drivers +# +CONFIG_USB_ACM=m +CONFIG_USB_PRINTER=m +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may +# + +# +# also be needed; see USB_STORAGE Help for more info +# +CONFIG_USB_STORAGE=m +CONFIG_USB_STORAGE_DEBUG=y +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB port drivers +# +CONFIG_USB_SERIAL=y +CONFIG_USB_SERIAL_CONSOLE=y +# CONFIG_USB_EZUSB is not set +CONFIG_USB_SERIAL_GENERIC=y +# CONFIG_USB_SERIAL_AIRCABLE is not set +# CONFIG_USB_SERIAL_ARK3116 is not set +# CONFIG_USB_SERIAL_BELKIN is not set +# CONFIG_USB_SERIAL_CH341 is not set +# CONFIG_USB_SERIAL_WHITEHEAT is not set +# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set +# CONFIG_USB_SERIAL_CP210X is not set +# CONFIG_USB_SERIAL_CYPRESS_M8 is not set +# CONFIG_USB_SERIAL_EMPEG is not set +CONFIG_USB_SERIAL_FTDI_SIO=m +# CONFIG_USB_SERIAL_FUNSOFT is not set +# CONFIG_USB_SERIAL_VISOR is not set +# CONFIG_USB_SERIAL_IPAQ is not set +# CONFIG_USB_SERIAL_IR is not set +# CONFIG_USB_SERIAL_EDGEPORT is not set +# CONFIG_USB_SERIAL_EDGEPORT_TI is not set +# CONFIG_USB_SERIAL_GARMIN is not set +# CONFIG_USB_SERIAL_IPW is not set +# CONFIG_USB_SERIAL_IUU is not set +# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set +# CONFIG_USB_SERIAL_KEYSPAN is not set +# CONFIG_USB_SERIAL_KLSI is not set +# CONFIG_USB_SERIAL_KOBIL_SCT is not set +# CONFIG_USB_SERIAL_MCT_U232 is not set +# CONFIG_USB_SERIAL_MOS7720 is not set +# CONFIG_USB_SERIAL_MOS7840 is not set +# CONFIG_USB_SERIAL_MOTOROLA is not set +# CONFIG_USB_SERIAL_NAVMAN is not set +# CONFIG_USB_SERIAL_PL2303 is not set +# CONFIG_USB_SERIAL_OTI6858 is not set +# CONFIG_USB_SERIAL_QUALCOMM is not set +# CONFIG_USB_SERIAL_SPCP8X5 is not set +# CONFIG_USB_SERIAL_HP4X is not set +# CONFIG_USB_SERIAL_SAFE is not set +# CONFIG_USB_SERIAL_SIEMENS_MPI is not set +CONFIG_USB_SERIAL_SIERRAWIRELESS=m +# CONFIG_USB_SERIAL_SYMBOL is not set +# CONFIG_USB_SERIAL_TI is not set +# CONFIG_USB_SERIAL_CYBERJACK is not set +# CONFIG_USB_SERIAL_XIRCOM is not set +CONFIG_USB_SERIAL_OPTION=m +# CONFIG_USB_SERIAL_OMNINET is not set +# CONFIG_USB_SERIAL_OPTICON is not set +# CONFIG_USB_SERIAL_DEBUG is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG is not set +# CONFIG_USB_GADGET_DEBUG_FILES is not set +CONFIG_USB_GADGET_VBUS_DRAW=2 +CONFIG_USB_GADGET_SELECTED=y +CONFIG_USB_GADGET_AT91=y +CONFIG_USB_AT91=y +# CONFIG_USB_GADGET_ATMEL_USBA is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_PXA25X is not set +# CONFIG_USB_GADGET_R8A66597 is not set +# CONFIG_USB_GADGET_PXA27X is not set +# CONFIG_USB_GADGET_S3C_HSOTG is not set +# CONFIG_USB_GADGET_IMX is not set +# CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_FSL_QE is not set +# CONFIG_USB_GADGET_CI13XXX is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LANGWELL is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +# CONFIG_USB_GADGET_DUALSPEED is not set +CONFIG_USB_ZERO=m +# CONFIG_USB_AUDIO is not set +# CONFIG_USB_ETH is not set +CONFIG_USB_GADGETFS=m +CONFIG_USB_FILE_STORAGE=m +# CONFIG_USB_FILE_STORAGE_TEST is not set +CONFIG_USB_G_SERIAL=m +# CONFIG_USB_MIDI_GADGET is not set +# CONFIG_USB_G_PRINTER is not set +# CONFIG_USB_CDC_COMPOSITE is not set + +# +# OTG and related infrastructure +# +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD/SDIO Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set + +# +# MMC/SD/SDIO Host Controller Drivers +# +# CONFIG_MMC_SDHCI is not set +CONFIG_MMC_AT91=m +# CONFIG_MMC_ATMELMCI is not set +# CONFIG_MMC_SPI is not set +# CONFIG_MEMSTICK is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y + +# +# LED drivers +# +# CONFIG_LEDS_PCA9532 is not set +CONFIG_LEDS_GPIO=y +CONFIG_LEDS_GPIO_PLATFORM=y +# CONFIG_LEDS_LP3944 is not set +# CONFIG_LEDS_PCA955X is not set +# CONFIG_LEDS_DAC124S085 is not set +# CONFIG_LEDS_BD2802 is not set + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set +# CONFIG_LEDS_TRIGGER_GPIO is not set +CONFIG_LEDS_TRIGGER_DEFAULT_ON=y + +# +# iptables trigger is under Netfilter config (LED target) +# +# CONFIG_ACCESSIBILITY is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set + +# +# SPI RTC drivers +# +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1305 is not set +# CONFIG_RTC_DRV_DS1390 is not set +# CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_R9701 is not set +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_DS3234 is not set +# CONFIG_RTC_DRV_PCF2123 is not set + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +CONFIG_RTC_DRV_AT91SAM9=y +CONFIG_RTC_DRV_AT91SAM9_RTT=0 +CONFIG_RTC_DRV_AT91SAM9_GPBR=0 +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_UIO is not set + +# +# TI VLYNQ +# +# CONFIG_STAGING is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +CONFIG_EXT4_FS=y +CONFIG_EXT4_FS_XATTR=y +# CONFIG_EXT4_FS_POSIX_ACL is not set +# CONFIG_EXT4_FS_SECURITY is not set +# CONFIG_EXT4_DEBUG is not set +CONFIG_JBD=y +CONFIG_JBD2=y +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +# CONFIG_MSDOS_FS is not set +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +CONFIG_JFFS2_FS_WBUF_VERIFY=y +CONFIG_JFFS2_SUMMARY=y +CONFIG_JFFS2_FS_XATTR=y +CONFIG_JFFS2_FS_POSIX_ACL=y +CONFIG_JFFS2_FS_SECURITY=y +CONFIG_JFFS2_COMPRESSION_OPTIONS=y +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_LZO=y +CONFIG_JFFS2_RTIME=y +CONFIG_JFFS2_RUBIN=y +# CONFIG_JFFS2_CMODE_NONE is not set +CONFIG_JFFS2_CMODE_PRIORITY=y +# CONFIG_JFFS2_CMODE_SIZE is not set +# CONFIG_JFFS2_CMODE_FAVOURLZO is not set +CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +CONFIG_ROMFS_FS=y +CONFIG_ROMFS_BACKED_BY_BLOCK=y +# CONFIG_ROMFS_BACKED_BY_MTD is not set +# CONFIG_ROMFS_BACKED_BY_BOTH is not set +CONFIG_ROMFS_ON_BLOCK=y +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +# CONFIG_NFS_V3 is not set +# CONFIG_NFS_V4 is not set +CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set +CONFIG_LOCKD=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +CONFIG_NLS_CODEPAGE_850=y +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set +# CONFIG_DLM is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_KMEMLEAK is not set +CONFIG_DEBUG_PREEMPT=y +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +CONFIG_DEBUG_MEMORY_INIT=y +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +# CONFIG_PAGE_POISONING is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_TRACING_SUPPORT=y +CONFIG_FTRACE=y +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_PREEMPT_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set +# CONFIG_BOOT_TRACER is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +CONFIG_ARM_UNWIND=y +CONFIG_DEBUG_USER=y +# CONFIG_DEBUG_ERRORS is not set +# CONFIG_DEBUG_STACK_USAGE is not set +CONFIG_DEBUG_LL=y +# CONFIG_DEBUG_ICEDCC is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_CRYPTO is not set +# CONFIG_BINARY_PRINTF is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +CONFIG_CRC_CCITT=y +CONFIG_CRC16=y +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/multitech/recipes/linux/linux-2.6.32/mtcdp-embedded/linux-2.6.32.3-at25.patch b/multitech/recipes/linux/linux-2.6.32/mtcdp-embedded/linux-2.6.32.3-at25.patch new file mode 100644 index 0000000..3aa9096 --- /dev/null +++ b/multitech/recipes/linux/linux-2.6.32/mtcdp-embedded/linux-2.6.32.3-at25.patch @@ -0,0 +1,37 @@ +diff -uprN -X linux-2.6.32.3/Documentation/dontdiff linux-2.6.32.3-vanilla/drivers/misc/eeprom/at25.c linux-2.6.32.3/drivers/misc/eeprom/at25.c +--- linux-2.6.32.3-vanilla/drivers/misc/eeprom/at25.c 2010-01-06 17:07:45.000000000 -0600 ++++ linux-2.6.32.3/drivers/misc/eeprom/at25.c 2010-10-27 11:05:36.000000000 -0500 +@@ -147,6 +147,7 @@ at25_ee_write(struct at25_data *at25, co + unsigned written = 0; + unsigned buf_size; + u8 *bounce; ++ int a8; + + if (unlikely(off >= at25->bin.size)) + return -EFBIG; +@@ -163,6 +164,11 @@ at25_ee_write(struct at25_data *at25, co + if (!bounce) + return -ENOMEM; + ++ if (!strcmp(at25->chip.name, "at25040b")) ++ a8 = 1; ++ else ++ a8 = 0; ++ + /* For write, rollover is within the page ... so we write at + * most one page, then manually roll over to the next page. + */ +@@ -183,6 +189,13 @@ at25_ee_write(struct at25_data *at25, co + break; + } + ++ if (a8) { ++ if (offset & BIT(8)) ++ bounce[0] |= BIT(3); ++ else ++ bounce[0] &= ~BIT(3); ++ } ++ + /* 8/16/24-bit address is written MSB first */ + switch (at25->addrlen) { + default: /* case 3 */ diff --git a/multitech/recipes/linux/linux-2.6.32/mtcdp-embedded/linux-2.6.32.3-at91_mci.patch b/multitech/recipes/linux/linux-2.6.32/mtcdp-embedded/linux-2.6.32.3-at91_mci.patch new file mode 100644 index 0000000..820ce7f --- /dev/null +++ b/multitech/recipes/linux/linux-2.6.32/mtcdp-embedded/linux-2.6.32.3-at91_mci.patch @@ -0,0 +1,39 @@ +diff -uprN -X linux-2.6.32.3/Documentation/dontdiff linux-2.6.32.3-vanilla/drivers/mmc/host/at91_mci.c linux-2.6.32.3/drivers/mmc/host/at91_mci.c +--- linux-2.6.32.3-vanilla/drivers/mmc/host/at91_mci.c 2010-01-06 17:07:45.000000000 -0600 ++++ linux-2.6.32.3/drivers/mmc/host/at91_mci.c 2010-10-11 10:16:06.000000000 -0500 +@@ -201,7 +201,7 @@ static inline void at91_mci_sg_to_dma(st + len = data->sg_len; + + /* AT91SAM926[0/3] Data Write Operation and number of bytes erratum */ +- if (cpu_is_at91sam9260() || cpu_is_at91sam9263()) ++ if (cpu_is_at91sam9260() || cpu_is_at91sam9263() || cpu_is_at91sam9g20()) + if (host->total_length == 12) + memset(dmabuf, 0, 12); + +@@ -461,7 +461,7 @@ static void at91_mci_enable(struct at91m + at91_mci_write(host, AT91_MCI_DTOR, AT91_MCI_DTOMUL_1M | AT91_MCI_DTOCYC); + mr = AT91_MCI_PDCMODE | 0x34a; + +- if (cpu_is_at91sam9260() || cpu_is_at91sam9263()) ++ if (cpu_is_at91sam9260() || cpu_is_at91sam9263() || cpu_is_at91sam9g20()) + mr |= AT91_MCI_RDPROOF | AT91_MCI_WRPROOF; + + at91_mci_write(host, AT91_MCI_MR, mr); +@@ -617,7 +617,7 @@ static void at91_mci_send_command(struct + * AT91SAM926[0/3] Data Write Operation and + * number of bytes erratum + */ +- if (cpu_is_at91sam9260 () || cpu_is_at91sam9263()) ++ if (cpu_is_at91sam9260 () || cpu_is_at91sam9263() || cpu_is_at91sam9g20()) + if (host->total_length < 12) + host->total_length = 12; + +@@ -1017,7 +1017,7 @@ static int __init at91_mci_probe(struct + host->bus_mode = 0; + host->board = pdev->dev.platform_data; + if (host->board->wire4) { +- if (cpu_is_at91sam9260() || cpu_is_at91sam9263()) ++ if (cpu_is_at91sam9260() || cpu_is_at91sam9263() || cpu_is_at91sam9g20()) + mmc->caps |= MMC_CAP_4_BIT_DATA; + else + dev_warn(&pdev->dev, "4 wire bus mode not supported" diff --git a/multitech/recipes/linux/linux-2.6.32/mtcdp-embedded/linux-2.6.32.3-atmel_serial_disable_hwhs.patch b/multitech/recipes/linux/linux-2.6.32/mtcdp-embedded/linux-2.6.32.3-atmel_serial_disable_hwhs.patch new file mode 100644 index 0000000..bd620af --- /dev/null +++ b/multitech/recipes/linux/linux-2.6.32/mtcdp-embedded/linux-2.6.32.3-atmel_serial_disable_hwhs.patch @@ -0,0 +1,32 @@ +Revert commit 8e706c4d0dab214c625a2df84a0ca69a76bae65d in linux-2.6: + avr32: add hardware handshake support to atmel_serial + +Reverting commit since it breaks hardware flow control for at91sam9g20 + +diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c +index 9d948bc..b659f2c 100644 +--- a/drivers/serial/atmel_serial.c ++++ b/drivers/serial/atmel_serial.c +@@ -1020,8 +1020,7 @@ static void atmel_set_termios(struct uart_port *port, struct ktermios *termios, + + /* Get current mode register */ + mode = UART_GET_MR(port) & ~(ATMEL_US_USCLKS | ATMEL_US_CHRL +- | ATMEL_US_NBSTOP | ATMEL_US_PAR +- | ATMEL_US_USMODE); ++ | ATMEL_US_NBSTOP | ATMEL_US_PAR); + + baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 16); + quot = uart_get_divisor(port, baud); +@@ -1066,12 +1065,6 @@ static void atmel_set_termios(struct uart_port *port, struct ktermios *termios, + } else + mode |= ATMEL_US_PAR_NONE; + +- /* hardware handshake (RTS/CTS) */ +- if (termios->c_cflag & CRTSCTS) +- mode |= ATMEL_US_USMODE_HWHS; +- else +- mode |= ATMEL_US_USMODE_NORMAL; +- + spin_lock_irqsave(&port->lock, flags); + + port->read_status_mask = ATMEL_US_OVRE; diff --git a/multitech/recipes/linux/linux-2.6.32/mtcdp-embedded/linux-2.6.32.3-atmel_spi.patch b/multitech/recipes/linux/linux-2.6.32/mtcdp-embedded/linux-2.6.32.3-atmel_spi.patch new file mode 100644 index 0000000..a7b87b3 --- /dev/null +++ b/multitech/recipes/linux/linux-2.6.32/mtcdp-embedded/linux-2.6.32.3-atmel_spi.patch @@ -0,0 +1,12 @@ +diff -uprN -X linux-2.6.32.3/Documentation/dontdiff linux-2.6.32.3-vanilla/drivers/spi/atmel_spi.c linux-2.6.32.3/drivers/spi/atmel_spi.c +--- linux-2.6.32.3-vanilla/drivers/spi/atmel_spi.c 2010-01-06 17:07:45.000000000 -0600 ++++ linux-2.6.32.3/drivers/spi/atmel_spi.c 2010-09-08 13:38:52.000000000 -0500 +@@ -768,7 +768,7 @@ static int __init atmel_spi_probe(struct + master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH; + + master->bus_num = pdev->id; +- master->num_chipselect = 4; ++ master->num_chipselect = 7; + master->setup = atmel_spi_setup; + master->transfer = atmel_spi_transfer; + master->cleanup = atmel_spi_cleanup; diff --git a/multitech/recipes/linux/linux-2.6.32/mtcdp-embedded/linux-2.6.32.3-m25p80.patch b/multitech/recipes/linux/linux-2.6.32/mtcdp-embedded/linux-2.6.32.3-m25p80.patch new file mode 100644 index 0000000..71d3a92 --- /dev/null +++ b/multitech/recipes/linux/linux-2.6.32/mtcdp-embedded/linux-2.6.32.3-m25p80.patch @@ -0,0 +1,12 @@ +diff -uprN -X linux-2.6.32.3/Documentation/dontdiff linux-2.6.32.3-vanilla/drivers/mtd/devices/m25p80.c linux-2.6.32.3/drivers/mtd/devices/m25p80.c +--- linux-2.6.32.3-vanilla/drivers/mtd/devices/m25p80.c 2010-01-06 17:07:45.000000000 -0600 ++++ linux-2.6.32.3/drivers/mtd/devices/m25p80.c 2010-10-14 11:36:06.000000000 -0500 +@@ -780,7 +780,7 @@ static int __devinit m25p_probe(struct s + * with the software protection bits set + */ + +- if (info->jedec_id >> 16 == 0x1f) { ++ if (info->jedec_id >> 16 == 0x1f || info->jedec_id == 0xbf258e) { + write_enable(flash); + write_sr(flash, 0); + } diff --git a/multitech/recipes/linux/linux-2.6.32/mtcdp-embedded/linux-2.6.32.3-mach-at91-mtcdp-embedded.patch b/multitech/recipes/linux/linux-2.6.32/mtcdp-embedded/linux-2.6.32.3-mach-at91-mtcdp-embedded.patch new file mode 100644 index 0000000..315fe05 --- /dev/null +++ b/multitech/recipes/linux/linux-2.6.32/mtcdp-embedded/linux-2.6.32.3-mach-at91-mtcdp-embedded.patch @@ -0,0 +1,363 @@ +diff -uprN -X linux-2.6.32.3/Documentation/dontdiff linux-2.6.32.3-vanilla/arch/arm/mach-at91/at91sam9260_devices.c linux-2.6.32.3/arch/arm/mach-at91/at91sam9260_devices.c +--- linux-2.6.32.3-vanilla/arch/arm/mach-at91/at91sam9260_devices.c 2010-01-06 17:07:45.000000000 -0600 ++++ linux-2.6.32.3/arch/arm/mach-at91/at91sam9260_devices.c 2010-10-11 10:15:08.000000000 -0500 +@@ -183,9 +183,9 @@ void __init at91_add_device_eth(struct a + at91_set_B_periph(AT91_PIN_PA25, 0); /* ERX2 */ + at91_set_B_periph(AT91_PIN_PA26, 0); /* ERX3 */ + at91_set_B_periph(AT91_PIN_PA27, 0); /* ERXCK */ +- at91_set_B_periph(AT91_PIN_PA23, 0); /* ETX2 */ +- at91_set_B_periph(AT91_PIN_PA24, 0); /* ETX3 */ +- at91_set_B_periph(AT91_PIN_PA22, 0); /* ETXER */ ++ at91_set_B_periph(AT91_PIN_PA10, 0); /* ETX2 */ ++ at91_set_B_periph(AT91_PIN_PA11, 0); /* ETX3 */ ++ /*at91_set_B_periph(AT91_PIN_PA22, 0);*/ /* ETXER */ + } + + eth_data = *data; +@@ -571,7 +571,15 @@ static struct platform_device at91sam926 + .num_resources = ARRAY_SIZE(spi1_resources), + }; + +-static const unsigned spi1_standard_cs[4] = { AT91_PIN_PB3, AT91_PIN_PC5, AT91_PIN_PC4, AT91_PIN_PC3 }; ++static const unsigned spi1_standard_cs[7] = { ++ AT91_PIN_PB21, //cdp-embedded mapped to this one instead of AT91_PIN_PB3, ++ AT91_PIN_PC5, ++ AT91_PIN_PC4, ++ AT91_PIN_PC6, ++ AT91_PIN_PB12, ++ AT91_PIN_PB13, ++ AT91_PIN_PB16 ++}; + + void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) + { +diff -uprN -X linux-2.6.32.3/Documentation/dontdiff linux-2.6.32.3-vanilla/arch/arm/mach-at91/board-sam9g20ek.c linux-2.6.32.3/arch/arm/mach-at91/board-sam9g20ek.c +--- linux-2.6.32.3-vanilla/arch/arm/mach-at91/board-sam9g20ek.c 2010-01-06 17:07:45.000000000 -0600 ++++ linux-2.6.32.3/arch/arm/mach-at91/board-sam9g20ek.c 2010-10-14 16:16:52.000000000 -0500 +@@ -27,6 +27,11 @@ + #include <linux/gpio_keys.h> + #include <linux/input.h> + #include <linux/clk.h> ++#include <linux/i2c/at24.h> ++#include <linux/spi/eeprom.h> ++#include <linux/spi/flash.h> ++#include <linux/delay.h> ++#include <mach/at91_rtt.h> + + #include <mach/hardware.h> + #include <asm/setup.h> +@@ -44,9 +49,12 @@ + #include "sam9_smc.h" + #include "generic.h" + ++static int i2c_present; + + static void __init ek_map_io(void) + { ++ int tmp; ++ + /* Initialize processor: 18.432 MHz crystal */ + at91sam9260_initialize(18432000); + +@@ -61,12 +69,55 @@ static void __init ek_map_io(void) + /* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */ + at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS); + ++ /* ++ * Reset any initiated i2c data transfers? ++ */ ++ at91_set_gpio_input(AT91_PIN_PA23, 0); ++ at91_set_gpio_output(AT91_PIN_PA24, 0); ++ for (tmp = 0; tmp < 11; tmp++) { ++ at91_set_gpio_value(AT91_PIN_PA24, 0); ++ udelay(20); ++ at91_set_gpio_value(AT91_PIN_PA24, 1); ++ udelay(20); ++ } ++ at91_set_gpio_input(AT91_PIN_PA24, 0); ++ ++ /* ++ * PA24 and PA23 are used as ID pins on MTCBA/MTCDP-0.0 and I2C pins on MTCDP-1.0. ++ * ++ * MTCBA Rev. B: 0x01, C: 0x02, D: 0x03 ++ * MTCDP Rev. A reads as 0x00 with TWCK and TWD pulled high ++ * ++ */ ++ tmp = !at91_get_gpio_value(AT91_PIN_PA24) << 1 | !at91_get_gpio_value(AT91_PIN_PA23); ++ ++ i2c_present = !tmp; ++ ++ /* ++ * The GPS receiver is either at US2 on MTCBA/MTCDP-0.0 and US3 on MTCDP-1.0. ++ */ ++ if (i2c_present) { ++ at91_register_uart(AT91SAM9260_ID_US3, 3, ATMEL_UART_CTS | ATMEL_UART_RTS); ++ printk(KERN_INFO "sam9g20: i2c available\n"); ++ } else { ++ at91_register_uart(AT91SAM9260_ID_US2, 3, 0); ++ printk(KERN_INFO "sam9g20: i2c not available\n"); ++ } ++ + /* set serial console to ttyS0 (ie, DBGU) */ + at91_set_serial_console(0); + } + + static void __init ek_init_irq(void) + { ++ /* ++ * Ensure RTT interrupts are disabled ++ */ ++ u32 mr; ++ mr = __raw_readl(AT91_VA_BASE_SYS + AT91_RTT + AT91_RTT_MR); ++ __raw_writel(mr & ~(AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN), ++ AT91_VA_BASE_SYS + AT91_RTT + AT91_RTT_MR); ++ + at91sam9260_init_interrupts(NULL); + } + +@@ -82,11 +133,38 @@ static struct at91_usbh_data __initdata + * USB Device port + */ + static struct at91_udc_data __initdata ek_udc_data = { +- .vbus_pin = AT91_PIN_PC5, +- .pullup_pin = 0, /* pull-up driven by UDC */ ++ .vbus_pin = AT91_PIN_PC12, ++ .pullup_pin = 0, /* pull-up driven by UDC */ + }; + + ++#define MTS_EXT_AT25_TEST 0 ++#if MTS_EXT_AT25_TEST ++static struct spi_eeprom at25040b = { ++ .byte_len = SZ_4K / 8, ++ .name = "at25040b", ++ .page_size = 8, ++ .flags = EE_ADDR1, ++}; ++#endif ++ ++#define MTS_EXT_STT25_TEST 0 ++#if MTS_EXT_STT25_TEST ++static struct mtd_partition m25_partitions[] = { ++ { ++ .name = "flash", ++ .offset = 0x00000000, ++ .size = MTDPART_SIZ_FULL, ++ }, ++}; ++ ++static struct flash_platform_data m25_spi_flash_data = { ++ .type = "sst25vf080b", ++ .nr_parts = ARRAY_SIZE(m25_partitions), ++ .parts = m25_partitions, ++}; ++#endif ++ + /* + * SPI devices. + */ +@@ -107,6 +185,54 @@ static struct spi_board_info ek_spi_devi + }, + #endif + #endif ++ { ++ .modalias = "mts-io-sout", ++ .chip_select = 0, ++ .bus_num = 1, ++ }, ++ { ++ .modalias = "mts-io-board-temp", ++ .chip_select = 2, ++ .bus_num = 1, ++ }, ++ { ++ .modalias = "mts-io-dout", ++ .chip_select = 1, ++ .bus_num = 1, ++ }, ++ { ++ .modalias = "mts-io-din", ++ .chip_select = 4, ++ .bus_num = 1, ++ }, ++#if MTS_EXT_AT25_TEST ++ { ++ .modalias = "at25", ++ .platform_data = &at25040b, ++ .max_speed_hz = 20 * 1000 * 1000, ++ .bus_num = 1, ++ .chip_select = 5, ++ .mode = SPI_MODE_0, ++ }, ++ { ++ .modalias = "at25", ++ .platform_data = &at25040b, ++ .max_speed_hz = 20 * 1000 * 1000, ++ .bus_num = 1, ++ .chip_select = 6, ++ .mode = SPI_MODE_0, ++ }, ++#endif ++#if MTS_EXT_STT25_TEST ++ { ++ .modalias = "m25p80", ++ .platform_data = &m25_spi_flash_data, ++ .irq = NO_IRQ, ++ .max_speed_hz = 33 * 1000 * 1000, ++ .bus_num = 1, ++ .chip_select = 5, ++ }, ++#endif + }; + + +@@ -115,7 +241,7 @@ static struct spi_board_info ek_spi_devi + */ + static struct at91_eth_data __initdata ek_macb_data = { + .phy_irq_pin = AT91_PIN_PA7, +- .is_rmii = 1, ++ .is_rmii = 0, + }; + + +@@ -124,18 +250,48 @@ static struct at91_eth_data __initdata e + */ + static struct mtd_partition __initdata ek_nand_partition[] = { + { +- .name = "Bootstrap", +- .offset = 0, +- .size = 4 * SZ_1M, ++ .name = "MTNCG-NANDFlash", ++ .offset = 0, ++ .size = 256*1024*1024, ++ }, ++ { ++ .name = "AT91Bootstrap", ++ .offset = 0, ++ .size = 128*1024, + }, + { +- .name = "Partition 1", +- .offset = MTDPART_OFS_NXTBLK, +- .size = 60 * SZ_1M, ++ .name = "UBoot", ++ .offset = 128*1024, ++ .size = 256*1024, + }, + { +- .name = "Partition 2", +- .offset = MTDPART_OFS_NXTBLK, ++ .name = "UBoot Config", ++ .offset = 384*1024, ++ .size = 128*1024, ++ }, ++ { ++ .name = "UBoot Redundant Config", ++ .offset = 512*1024, ++ .size = 128*1024, ++ }, ++ { ++ .name = "uImage", ++ .offset = 640*1024, ++ .size = 59*128*1024, ++ }, ++ { ++ .name = "Config", ++ .offset = 64*128*1024, ++ .size = 64*128*1024, ++ }, ++ { ++ .name = "Oem Config", ++ .offset = 128*128*1024, ++ .size = 64*128*1024, ++ }, ++ { ++ .name = "Rootfs", ++ .offset = 192*128*1024, + .size = MTDPART_SIZ_FULL, + }, + }; +@@ -195,11 +351,13 @@ static void __init ek_add_device_nand(vo + + /* + * MCI (SD/MMC) +- * det_pin, wp_pin and vcc_pin are not connected ++ * det_pin, wp_pin and vcc_pin are not connected for embedded cdp REV0 + */ + static struct at91_mmc_data __initdata ek_mmc_data = { + .slot_b = 1, + .wire4 = 1, ++// .det_pin = AT91_PIN_PA6, ++// .wp_pin = AT91_PIN_PA9, + }; + + +@@ -207,15 +365,10 @@ static struct at91_mmc_data __initdata e + * LEDs + */ + static struct gpio_led ek_leds[] = { +- { /* "bottom" led, green, userled1 to be defined */ +- .name = "ds5", +- .gpio = AT91_PIN_PA6, ++ { /* "status" led, green */ ++ .name = "status", ++ .gpio = AT91_PIN_PA30, + .active_low = 1, +- .default_trigger = "none", +- }, +- { /* "power" led, yellow */ +- .name = "ds1", +- .gpio = AT91_PIN_PA9, + .default_trigger = "heartbeat", + } + }; +@@ -269,15 +422,37 @@ static void __init ek_add_device_buttons + static void __init ek_add_device_buttons(void) {} + #endif + ++uint8_t mts_id_eeprom[512]; ++ ++EXPORT_SYMBOL(mts_id_eeprom); ++ ++static void mts_id_eeprom_load(struct memory_accessor *macc, void *context) ++{ ++ int tmp; ++ ++ memset(mts_id_eeprom, 0, sizeof(mts_id_eeprom)); ++ ++ tmp = macc->read(macc, mts_id_eeprom, 0, sizeof(mts_id_eeprom)); ++ if (tmp != sizeof(mts_id_eeprom)) { ++ printk(KERN_ERR "sam9g20: id eeprom read failed: %d\n", tmp); ++ } else { ++ printk(KERN_INFO "sam9g20: read %d bytes from id eeprom\n", tmp); ++ } ++} ++ ++static struct at24_platform_data at24c04_data = { ++ .byte_len = SZ_4K / 8, ++ .page_size = 16, ++ .setup = mts_id_eeprom_load, ++}; + + static struct i2c_board_info __initdata ek_i2c_devices[] = { + { +- I2C_BOARD_INFO("24c512", 0x50), +- I2C_BOARD_INFO("wm8731", 0x1b), ++ I2C_BOARD_INFO("24c04", 0x56), ++ .platform_data = &at24c04_data, + }, + }; + +- + static void __init ek_board_init(void) + { + /* Serial */ +@@ -303,7 +478,7 @@ static void __init ek_board_init(void) + /* PCK0 provides MCLK to the WM8731 */ + at91_set_B_periph(AT91_PIN_PC1, 0); + /* SSC (for WM8731) */ +- at91_add_device_ssc(AT91SAM9260_ID_SSC, ATMEL_SSC_TX); ++ /* at91_add_device_ssc(AT91SAM9260_ID_SSC, ATMEL_SSC_TX); */ + } + + MACHINE_START(AT91SAM9G20EK, "Atmel AT91SAM9G20-EK") diff --git a/multitech/recipes/linux/linux-2.6.32/mtcdp-embedded/linux-2.6.32.3-option.patch b/multitech/recipes/linux/linux-2.6.32/mtcdp-embedded/linux-2.6.32.3-option.patch new file mode 100644 index 0000000..c778e53 --- /dev/null +++ b/multitech/recipes/linux/linux-2.6.32/mtcdp-embedded/linux-2.6.32.3-option.patch @@ -0,0 +1,71 @@ +diff -uprN -X linux-2.6.32.3/Documentation/dontdiff linux-2.6.32.3-vanilla/drivers/usb/serial/option.c linux-2.6.32.3/drivers/usb/serial/option.c +--- linux-2.6.32.3-vanilla/drivers/usb/serial/option.c 2010-01-06 17:07:45.000000000 -0600 ++++ linux-2.6.32.3/drivers/usb/serial/option.c 2010-09-02 13:24:59.000000000 -0500 +@@ -913,33 +913,46 @@ static void option_indat_callback(struct + dbg("%s: %p", __func__, urb); + + endpoint = usb_pipeendpoint(urb->pipe); +- port = urb->context; ++ port = urb->context; + +- if (status) { ++ switch (status) { ++ case 0: ++ /* success */ ++ break; ++ case -ECONNRESET: ++ case -ENOENT: ++ case -ESHUTDOWN: ++ /* this urb is terminated, clean up */ ++ dbg("%s: urb shutting down with status: %d on endpoint %02x.", ++ __func__, status, endpoint); ++ return; ++ default: + dbg("%s: nonzero status: %d on endpoint %02x.", +- __func__, status, endpoint); +- } else { ++ __func__, status, endpoint); ++ goto exit; ++ } ++ ++ usb_serial_debug_data(debug, &port->dev, __func__, ++ urb->actual_length, data); ++ ++ if (urb->actual_length) { + tty = tty_port_tty_get(&port->port); +- if (urb->actual_length) { +- tty_buffer_request_room(tty, urb->actual_length); +- tty_insert_flip_string(tty, data, urb->actual_length); +- tty_flip_buffer_push(tty); +- } else +- dbg("%s: empty read urb received", __func__); +- tty_kref_put(tty); + +- /* Resubmit urb so we continue receiving */ +- if (port->port.count && status != -ESHUTDOWN) { +- err = usb_submit_urb(urb, GFP_ATOMIC); +- if (err) +- printk(KERN_ERR "%s: resubmit read urb failed. " +- "(%d)", __func__, err); +- else +- usb_mark_last_busy(port->serial->dev); +- } ++ tty_buffer_request_room(tty, urb->actual_length); ++ tty_insert_flip_string(tty, data, urb->actual_length); ++ tty_flip_buffer_push(tty); + ++ tty_kref_put(tty); + } +- return; ++ ++exit: ++ /* Resubmit urb so we continue receiving */ ++ err = usb_submit_urb(urb, GFP_ATOMIC); ++ if (err && err != -EPERM) ++ printk(KERN_ERR "%s: resubmit read urb failed. " ++ "(%d)", __func__, err); ++ else ++ usb_mark_last_busy(port->serial->dev); + } + + static void option_outdat_callback(struct urb *urb) diff --git a/multitech/recipes/linux/linux-2.6.32/mtcdp-embedded/linux-2.6.32.3-sierra.patch b/multitech/recipes/linux/linux-2.6.32/mtcdp-embedded/linux-2.6.32.3-sierra.patch new file mode 100644 index 0000000..2b90930 --- /dev/null +++ b/multitech/recipes/linux/linux-2.6.32/mtcdp-embedded/linux-2.6.32.3-sierra.patch @@ -0,0 +1,1109 @@ +diff -uprN -X linux-2.6.32.3/Documentation/dontdiff linux-2.6.32.3-vanilla/drivers/usb/serial/sierra.c linux-2.6.32.3/drivers/usb/serial/sierra.c +--- linux-2.6.32.3-vanilla/drivers/usb/serial/sierra.c 2010-01-06 17:07:45.000000000 -0600 ++++ linux-2.6.32.3/drivers/usb/serial/sierra.c 2010-09-02 11:29:36.000000000 -0500 +@@ -16,8 +16,13 @@ + Portions based on the option driver by Matthias Urlichs <smurf@smurf.noris.de> + Whom based his on the Keyspan driver by Hugh Blemings <hugh@blemings.org> + */ ++/* Uncomment to log function calls */ ++/* #define DEBUG */ ++/* Uncomment to force power level set to auto when attaching a device */ ++/* #define POWER_LEVEL_AUTO */ + +-#define DRIVER_VERSION "v.1.3.8" ++/* Sierra driver - kernel 2.6.32 */ ++#define DRIVER_VERSION "v.1.7.30" + #define DRIVER_AUTHOR "Kevin Lloyd, Elina Pasheva, Matthew Safar, Rory Filer" + #define DRIVER_DESC "USB Driver for Sierra Wireless USB modems" + +@@ -29,12 +34,18 @@ + #include <linux/module.h> + #include <linux/usb.h> + #include <linux/usb/serial.h> ++#include <asm/unaligned.h> + + #define SWIMS_USB_REQUEST_SetPower 0x00 ++#define SWIMS_USB_REQUEST_GetFwAttr 0x06 + #define SWIMS_USB_REQUEST_SetNmea 0x07 ++#define USB_REQUEST_TYPE_CLASS 0xA1 ++#define USB_REQUEST_IFACE 0x20 + +-#define N_IN_URB 8 +-#define N_OUT_URB 64 ++#define N_IN_URB_HM 8 ++#define N_OUT_URB_HM 64 ++#define N_IN_URB 4 ++#define N_OUT_URB 4 + #define IN_BUFLEN 4096 + + #define MAX_TRANSFER (PAGE_SIZE - 512) +@@ -42,19 +53,47 @@ + allocations > PAGE_SIZE and the number of packets in a page + is an integer 512 is the largest possible packet on EHCI */ + ++#define SWI_FW_ATTR_PM_MASK 0x02 ++/* PORTION_LEN defines the length of device attribute buffer */ ++#define PORTION_LEN 4096 ++ + static int debug; + static int nmea; + ++/* sysfs attributes */ ++static int sierra_create_sysfs_attrs(struct usb_serial_port *port); ++static int sierra_remove_sysfs_attrs(struct usb_serial_port *port); ++ + /* Used in interface blacklisting */ + struct sierra_iface_info { + const u32 infolen; /* number of interface numbers on blacklist */ + const u8 *ifaceinfo; /* pointer to the array holding the numbers */ + }; + ++/* per interface statistics */ ++struct sierra_intf_stats { ++ atomic_t rx_bytes; /* received bytes */ ++ atomic_t indat_cb_cnt; /* indat callback count */ ++ atomic_t indat_cb_fail; /* indat cb with error */ ++ ++ atomic_t tx_bytes; /* transmitted bytes */ ++ atomic_t write_cnt; /* no. of writes */ ++ atomic_t write_err; /* no. of failed writes */ ++ ++ atomic_t delayed_writes; /* no. of delayed writes */ ++ atomic_t delayed_write_err; /* no. of delayed write errs */ ++ ++ atomic_t outdat_cb_cnt; /* outdat callback count */ ++ atomic_t outdat_cb_fail; /* outdat cb with error */ ++ ++}; ++ + struct sierra_intf_private { + spinlock_t susp_lock; + unsigned int suspended:1; + int in_flight; ++ ++ struct sierra_intf_stats stats; + }; + + static int sierra_set_power_state(struct usb_device *udev, __u16 swiState) +@@ -87,6 +126,38 @@ static int sierra_vsc_set_nmea(struct us + return result; + } + ++static int sierra_get_fw_attr(struct usb_device *udev, u16 *data) ++{ ++ int result; ++ u16 *attrdata; ++ ++ dev_dbg(&udev->dev, "%s\n", __func__); ++ ++ attrdata = kmalloc(sizeof(*attrdata), GFP_KERNEL); ++ if (!attrdata) ++ return -ENOMEM; ++ ++ result = usb_control_msg(udev, ++ usb_rcvctrlpipe(udev, 0), ++ SWIMS_USB_REQUEST_GetFwAttr, /* __u8 request*/ ++ USB_TYPE_VENDOR | USB_DIR_IN, /* request type*/ ++ 0x0000, /* __u16 value */ ++ 0x0000, /* __u16 index */ ++ attrdata, /* void *data */ ++ sizeof(*attrdata), /* _u16 size */ ++ USB_CTRL_SET_TIMEOUT); /* in timeout */ ++ ++ if (result < 0) { ++ kfree(attrdata); ++ return -EIO; ++ } ++ ++ *data = *attrdata; ++ ++ kfree(attrdata); ++ return result; ++} ++ + static int sierra_calc_num_ports(struct usb_serial *serial) + { + int num_ports = 0; +@@ -124,12 +195,28 @@ static int is_blacklisted(const u8 ifnum + return 0; + } + ++static int is_himemory(const u8 ifnum, ++ const struct sierra_iface_info *himemorylist) ++{ ++ const u8 *info; ++ int i; ++ ++ if (himemorylist) { ++ info = himemorylist->ifaceinfo; ++ ++ for (i=0; i < himemorylist->infolen; i++) { ++ if (info[i] == ifnum) ++ return 1; ++ } ++ } ++ return 0; ++} ++ + static int sierra_calc_interface(struct usb_serial *serial) + { + int interface; + struct usb_interface *p_interface; + struct usb_host_interface *p_host_interface; +- dev_dbg(&serial->dev->dev, "%s\n", __func__); + + /* Get the interface structure pointer from the serial struct */ + p_interface = serial->interface; +@@ -138,8 +225,7 @@ static int sierra_calc_interface(struct + p_host_interface = p_interface->cur_altsetting; + + /* read the interface descriptor for this active altsetting +- * to find out the interface number we are on +- */ ++ * to find out the interface number we are on */ + interface = p_host_interface->desc.bInterfaceNumber; + + return interface; +@@ -150,13 +236,15 @@ static int sierra_probe(struct usb_seria + { + int result = 0; + struct usb_device *udev; +- struct sierra_intf_private *data; ++ struct sierra_intf_private *intfdata; ++ int alternate; + u8 ifnum; + + udev = serial->dev; + dev_dbg(&udev->dev, "%s\n", __func__); + + ifnum = sierra_calc_interface(serial); ++ alternate = 0; /* go with the first */ + /* + * If this interface supports more than 1 alternate + * select the 2nd one +@@ -164,9 +252,12 @@ static int sierra_probe(struct usb_seria + if (serial->interface->num_altsetting == 2) { + dev_dbg(&udev->dev, "Selecting alt setting for interface %d\n", + ifnum); +- /* We know the alternate setting is 1 for the MC8785 */ +- usb_set_interface(udev, ifnum, 1); ++ /* We know the alternate setting is for composite USB interface ++ * modems ++ */ ++ alternate = 1; + } ++ usb_set_interface(udev, ifnum, alternate); + + /* ifnum could have changed - by calling usb_set_interface */ + ifnum = sierra_calc_interface(serial); +@@ -178,17 +269,32 @@ static int sierra_probe(struct usb_seria + return -ENODEV; + } + +- data = serial->private = kzalloc(sizeof(struct sierra_intf_private), GFP_KERNEL); +- if (!data) ++ intfdata = serial->private = kzalloc(sizeof(struct sierra_intf_private), ++ GFP_KERNEL); ++ if (!intfdata) + return -ENOMEM; +- spin_lock_init(&data->susp_lock); ++ spin_lock_init(&intfdata->susp_lock); + + return result; + } + ++/* interfaces with higher memory requirements */ ++static const u8 hi_memory_typeA_ifaces[] = { 0, 2 }; ++static const struct sierra_iface_info typeA_interface_list = { ++ .infolen = ARRAY_SIZE(hi_memory_typeA_ifaces), ++ .ifaceinfo = hi_memory_typeA_ifaces, ++}; ++ ++static const u8 hi_memory_typeB_ifaces[] = { 3, 4, 5, 6 }; ++static const struct sierra_iface_info typeB_interface_list = { ++ .infolen = ARRAY_SIZE(hi_memory_typeB_ifaces), ++ .ifaceinfo = hi_memory_typeB_ifaces, ++}; ++ ++/* 'blacklist' of interfaces not served by this driver */ + static const u8 direct_ip_non_serial_ifaces[] = { 7, 8, 9, 10, 11 }; + static const struct sierra_iface_info direct_ip_interface_blacklist = { +- .infolen = ARRAY_SIZE(direct_ip_non_serial_ifaces), ++ .infolen = ARRAY_SIZE( direct_ip_non_serial_ifaces ), + .ifaceinfo = direct_ip_non_serial_ifaces, + }; + +@@ -240,7 +346,7 @@ static struct usb_device_id id_table [] + { USB_DEVICE(0x1199, 0x683A) }, /* Sierra Wireless MC8785 */ + { USB_DEVICE(0x1199, 0x683B) }, /* Sierra Wireless MC8785 Composite */ + /* Sierra Wireless MC8790, MC8791, MC8792 Composite */ +- { USB_DEVICE(0x1199, 0x683C) }, ++ { USB_DEVICE(0x1199, 0x683C) }, + { USB_DEVICE(0x1199, 0x683D) }, /* Sierra Wireless MC8791 Composite */ + /* Sierra Wireless MC8790, MC8791, MC8792 */ + { USB_DEVICE(0x1199, 0x683E) }, +@@ -261,33 +367,27 @@ static struct usb_device_id id_table [] + /* Sierra Wireless HSPA Non-Composite Device */ + { USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x6892, 0xFF, 0xFF, 0xFF)}, + { USB_DEVICE(0x1199, 0x6893) }, /* Sierra Wireless Device */ +- { USB_DEVICE(0x1199, 0x68A3), /* Sierra Wireless Direct IP modems */ +- .driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist ++ /* Sierra Wireless Direct IP modems */ ++ { USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x68A3, 0xFF, 0xFF, 0xFF), ++ .driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist + }, + + { } + }; + MODULE_DEVICE_TABLE(usb, id_table); + +-static struct usb_driver sierra_driver = { +- .name = "sierra", +- .probe = usb_serial_probe, +- .disconnect = usb_serial_disconnect, +- .suspend = usb_serial_suspend, +- .resume = usb_serial_resume, +- .id_table = id_table, +- .no_dynamic_id = 1, +- .supports_autosuspend = 1, +-}; +- ++/* per port private data */ + struct sierra_port_private { + spinlock_t lock; /* lock the structure */ + int outstanding_urbs; /* number of out urbs in flight */ ++ + struct usb_anchor active; + struct usb_anchor delayed; + ++ int num_out_urbs; ++ int num_in_urbs; + /* Input endpoints and buffers for this port */ +- struct urb *in_urbs[N_IN_URB]; ++ struct urb *in_urbs[N_IN_URB_HM]; + + /* Settings for the port */ + int rts_state; /* Handshaking pins (outputs) */ +@@ -302,7 +402,7 @@ struct sierra_port_private { + static int sierra_send_setup(struct usb_serial_port *port) + { + struct usb_serial *serial = port->serial; +- struct sierra_port_private *portdata; ++ struct sierra_port_private *portdata = usb_get_serial_port_data(port); + __u16 interface = 0; + int val = 0; + int do_send = 0; +@@ -310,8 +410,6 @@ static int sierra_send_setup(struct usb_ + + dev_dbg(&port->dev, "%s\n", __func__); + +- portdata = usb_get_serial_port_data(port); +- + if (portdata->dtr_state) + val |= 0x01; + if (portdata->rts_state) +@@ -404,11 +502,77 @@ static void sierra_release_urb(struct ur + if (urb) { + port = urb->context; + dev_dbg(&port->dev, "%s: %p\n", __func__, urb); +- kfree(urb->transfer_buffer); + usb_free_urb(urb); + } + } + ++/* Sysfs Attributes */ ++ ++static ssize_t show_suspend_status(struct device *dev, ++ struct device_attribute *attr, char *buf) ++{ ++ struct usb_serial_port *port; ++ struct sierra_port_private *portdata; ++ struct sierra_intf_private *intfdata; ++ unsigned long flags; ++ unsigned int flag_suspended = 0; ++ ++ port = to_usb_serial_port(dev); ++ portdata = usb_get_serial_port_data(port); ++ intfdata = port->serial->private; ++ ++ spin_lock_irqsave(&intfdata->susp_lock, flags); ++ flag_suspended = intfdata->suspended; ++ spin_unlock_irqrestore(&intfdata->susp_lock, flags); ++ ++ return snprintf(buf, PORTION_LEN, "%i\n", flag_suspended); ++} ++ ++static ssize_t show_stats(struct device *dev, ++ struct device_attribute *attr, char *buf) ++{ ++ struct usb_serial_port *port; ++ struct sierra_intf_private *intfdata; ++ ++ port = to_usb_serial_port(dev); ++ intfdata = port->serial->private; ++ ++ return snprintf(buf, PORTION_LEN, ++ "rx: %i B\tindat: %i\tindat err: %i\n" ++ "tx: %i B\toutdat: %i\toutdat err: %i\n" ++ "writes: %i\t\twrite err: %i\n" ++ "delayed writes: %i\tdelayed write err: %i\n", ++ atomic_read(&intfdata->stats.rx_bytes), atomic_read(&intfdata->stats.indat_cb_cnt), atomic_read(&intfdata->stats.indat_cb_fail), ++ atomic_read(&intfdata->stats.tx_bytes), atomic_read(&intfdata->stats.outdat_cb_cnt), atomic_read(&intfdata->stats.outdat_cb_fail), ++ atomic_read(&intfdata->stats.write_cnt), atomic_read(&intfdata->stats.write_err), ++ atomic_read(&intfdata->stats.delayed_writes), atomic_read(&intfdata->stats.delayed_write_err) ++ ); ++} ++ ++/* Read only suspend status */ ++static DEVICE_ATTR(suspend_status, S_IWUSR | S_IRUGO, show_suspend_status, ++ NULL); ++ ++/* Read only statistics */ ++static DEVICE_ATTR(stats, S_IWUSR | S_IRUGO, show_stats, NULL); ++ ++static int sierra_create_sysfs_attrs(struct usb_serial_port *port) ++{ ++ int result = 0; ++ ++ result = device_create_file(&port->dev, &dev_attr_stats); ++ if (unlikely (result < 0)) ++ return result; ++ return device_create_file(&port->dev, &dev_attr_suspend_status); ++} ++ ++static int sierra_remove_sysfs_attrs(struct usb_serial_port *port) ++{ ++ device_remove_file(&port->dev, &dev_attr_stats); ++ device_remove_file(&port->dev, &dev_attr_suspend_status); ++ return 0; ++} ++ + static void sierra_outdat_callback(struct urb *urb) + { + struct usb_serial_port *port = urb->context; +@@ -419,16 +583,20 @@ static void sierra_outdat_callback(struc + dev_dbg(&port->dev, "%s - port %d\n", __func__, port->number); + intfdata = port->serial->private; + +- /* free up the transfer buffer, as usb_free_urb() does not do this */ +- kfree(urb->transfer_buffer); + usb_autopm_put_interface_async(port->serial->interface); +- if (status) ++ ++ atomic_inc(&intfdata->stats.outdat_cb_cnt); ++ ++ if (status) { + dev_dbg(&port->dev, "%s - nonzero write bulk status " + "received: %d\n", __func__, status); ++ atomic_inc(&intfdata->stats.outdat_cb_fail); ++ } + + spin_lock(&portdata->lock); + --portdata->outstanding_urbs; + spin_unlock(&portdata->lock); ++ + spin_lock(&intfdata->susp_lock); + --intfdata->in_flight; + spin_unlock(&intfdata->susp_lock); +@@ -437,8 +605,9 @@ static void sierra_outdat_callback(struc + } + + /* Write */ +-static int sierra_write(struct tty_struct *tty, struct usb_serial_port *port, +- const unsigned char *buf, int count) ++static int sierra_write(struct tty_struct *tty, ++ struct usb_serial_port *port, ++ const unsigned char *buf, int count) + { + struct sierra_port_private *portdata = usb_get_serial_port_data(port); + struct sierra_intf_private *intfdata; +@@ -453,46 +622,49 @@ static int sierra_write(struct tty_struc + if (count == 0) + return 0; + +- portdata = usb_get_serial_port_data(port); ++ dev_dbg(&port->dev, "%s: write (%zu bytes)\n", __func__, writesize); ++ + intfdata = serial->private; + +- dev_dbg(&port->dev, "%s: write (%zd bytes)\n", __func__, writesize); + spin_lock_irqsave(&portdata->lock, flags); +- dev_dbg(&port->dev, "%s - outstanding_urbs: %d\n", __func__, +- portdata->outstanding_urbs); +- if (portdata->outstanding_urbs > N_OUT_URB) { ++ if (portdata->outstanding_urbs > portdata->num_out_urbs) { + spin_unlock_irqrestore(&portdata->lock, flags); + dev_dbg(&port->dev, "%s - write limit hit\n", __func__); + return 0; + } + portdata->outstanding_urbs++; +- dev_dbg(&port->dev, "%s - 1, outstanding_urbs: %d\n", __func__, +- portdata->outstanding_urbs); + spin_unlock_irqrestore(&portdata->lock, flags); + + retval = usb_autopm_get_interface_async(serial->interface); +- if (retval < 0) { ++ if (unlikely(retval < 0)) { + spin_lock_irqsave(&portdata->lock, flags); + portdata->outstanding_urbs--; + spin_unlock_irqrestore(&portdata->lock, flags); +- goto error_simple; ++ return retval; + } + + buffer = kmalloc(writesize, GFP_ATOMIC); + if (!buffer) { + dev_err(&port->dev, "out of memory\n"); +- retval = -ENOMEM; +- goto error_no_buffer; ++ spin_lock_irqsave(&portdata->lock, flags); ++ --portdata->outstanding_urbs; ++ spin_unlock_irqrestore(&portdata->lock, flags); ++ usb_autopm_put_interface_async(serial->interface); ++ return -ENOMEM; + } + + urb = usb_alloc_urb(0, GFP_ATOMIC); + if (!urb) { + dev_err(&port->dev, "no more free urbs\n"); +- retval = -ENOMEM; +- goto error_no_urb; ++ kfree(buffer); ++ spin_lock_irqsave(&portdata->lock, flags); ++ --portdata->outstanding_urbs; ++ spin_unlock_irqrestore(&portdata->lock, flags); ++ usb_autopm_put_interface_async(serial->interface); ++ return -ENOMEM; + } + +- memcpy(buffer, buf, writesize); ++ memcpy(buffer, buf, writesize); + + usb_serial_debug_data(debug, &port->dev, __func__, writesize, buffer); + +@@ -501,80 +673,91 @@ static int sierra_write(struct tty_struc + port->bulk_out_endpointAddress), + buffer, writesize, sierra_outdat_callback, port); + +- /* Handle the need to send a zero length packet */ +- urb->transfer_flags |= URB_ZERO_PACKET; ++ /* Handle the need to send a zero length packet and release the ++ * transfer buffer ++ */ ++ urb->transfer_flags |= (URB_ZERO_PACKET | URB_FREE_BUFFER); + + spin_lock_irqsave(&intfdata->susp_lock, flags); + + if (intfdata->suspended) { + usb_anchor_urb(urb, &portdata->delayed); + spin_unlock_irqrestore(&intfdata->susp_lock, flags); +- goto skip_power; +- } else { +- usb_anchor_urb(urb, &portdata->active); ++ /* release our reference to this urb, the USB core will ++ * eventually free it entirely */ ++ usb_free_urb(urb); ++ return writesize; + } ++ usb_anchor_urb(urb, &portdata->active); ++ + /* send it down the pipe */ + retval = usb_submit_urb(urb, GFP_ATOMIC); + if (retval) { + usb_unanchor_urb(urb); + spin_unlock_irqrestore(&intfdata->susp_lock, flags); ++ + dev_err(&port->dev, "%s - usb_submit_urb(write bulk) failed " + "with status = %d\n", __func__, retval); +- goto error; ++ usb_free_urb(urb); ++ spin_lock_irqsave(&portdata->lock, flags); ++ --portdata->outstanding_urbs; ++ spin_unlock_irqrestore(&portdata->lock, flags); ++ usb_autopm_put_interface_async(serial->interface); ++ atomic_inc(&intfdata->stats.write_err); ++ return retval; + } else { + intfdata->in_flight++; + spin_unlock_irqrestore(&intfdata->susp_lock, flags); ++ atomic_inc(&intfdata->stats.write_cnt); ++ atomic_add(writesize, &intfdata->stats.tx_bytes); + } +- +-skip_power: +- /* we are done with this urb, so let the host driver +- * really free it when it is finished with it */ +- usb_free_urb(urb); ++ /* release our reference to this urb, the USB core will eventually ++ * free it entirely */ ++ usb_free_urb(urb); + + return writesize; +-error: +- usb_free_urb(urb); +-error_no_urb: +- kfree(buffer); +-error_no_buffer: +- spin_lock_irqsave(&portdata->lock, flags); +- --portdata->outstanding_urbs; +- dev_dbg(&port->dev, "%s - 2. outstanding_urbs: %d\n", __func__, +- portdata->outstanding_urbs); +- spin_unlock_irqrestore(&portdata->lock, flags); +- usb_autopm_put_interface_async(serial->interface); +-error_simple: +- return retval; + } + + static void sierra_indat_callback(struct urb *urb) + { + int err; + int endpoint; +- struct usb_serial_port *port; ++ struct usb_serial_port *port = urb->context; + struct tty_struct *tty; ++ struct sierra_intf_private *intfdata; + unsigned char *data = urb->transfer_buffer; + int status = urb->status; + + endpoint = usb_pipeendpoint(urb->pipe); +- port = urb->context; + + dev_dbg(&port->dev, "%s: %p\n", __func__, urb); + ++ intfdata = port->serial->private; ++ ++ atomic_inc(&intfdata->stats.indat_cb_cnt); /* indat calls */ ++ + if (status) { + dev_dbg(&port->dev, "%s: nonzero status: %d on" + " endpoint %02x\n", __func__, status, endpoint); ++ atomic_inc(&intfdata->stats.indat_cb_fail); /* indat fails */ + } else { + if (urb->actual_length) { + tty = tty_port_tty_get(&port->port); +- +- tty_buffer_request_room(tty, urb->actual_length); +- tty_insert_flip_string(tty, data, urb->actual_length); +- tty_flip_buffer_push(tty); +- +- tty_kref_put(tty); +- usb_serial_debug_data(debug, &port->dev, __func__, +- urb->actual_length, data); ++ if (tty) { ++ tty_buffer_request_room(tty, ++ urb->actual_length); ++ tty_insert_flip_string(tty, data, ++ urb->actual_length); ++ tty_flip_buffer_push(tty); ++ ++ tty_kref_put(tty); ++ /* tty invalid after this point */ ++ /* rx'd bytes */ ++ atomic_add(urb->actual_length, ++ &intfdata->stats.rx_bytes); ++ usb_serial_debug_data(debug, &port->dev, ++ __func__, urb->actual_length, data); ++ } + } else { + dev_dbg(&port->dev, "%s: empty read urb" + " received\n", __func__); +@@ -582,10 +765,11 @@ static void sierra_indat_callback(struct + } + + /* Resubmit urb so we continue receiving */ +- if (port->port.count && status != -ESHUTDOWN && status != -EPERM) { ++ if (port->port.count && ++ status != -ESHUTDOWN && status != -ENOENT && status != -ENODEV) { + usb_mark_last_busy(port->serial->dev); + err = usb_submit_urb(urb, GFP_ATOMIC); +- if (err) ++ if (err && err != -ENODEV) + dev_err(&port->dev, "resubmit read urb failed." + "(%d)\n", err); + } +@@ -601,31 +785,29 @@ static void sierra_instat_callback(struc + struct sierra_port_private *portdata = usb_get_serial_port_data(port); + struct usb_serial *serial = port->serial; + +- dev_dbg(&port->dev, "%s: urb %p port %p has data %p\n", __func__, +- urb, port, portdata); ++ dev_dbg(&port->dev, "%s: %p\n", __func__, urb); + + if (status == 0) { + struct usb_ctrlrequest *req_pkt = + (struct usb_ctrlrequest *)urb->transfer_buffer; + +- if (!req_pkt) { +- dev_dbg(&port->dev, "%s: NULL req_pkt\n", +- __func__); +- return; +- } +- if ((req_pkt->bRequestType == 0xA1) && +- (req_pkt->bRequest == 0x20)) { ++ const u16 *sigp = (u16 *)(req_pkt + 1); ++ /* usb_ctrlrequest we parsed is followed by two bytes of data ++ * make sure we received that many bytes ++ */ ++ if (urb->actual_length >= sizeof(*req_pkt) + sizeof(*sigp) && ++ req_pkt->bRequestType == USB_REQUEST_TYPE_CLASS && ++ req_pkt->bRequest == USB_REQUEST_IFACE) { + int old_dcd_state; +- unsigned char signals = *((unsigned char *) +- urb->transfer_buffer + +- sizeof(struct usb_ctrlrequest)); ++ const u16 signals = get_unaligned_le16(sigp); + struct tty_struct *tty; + +- dev_dbg(&port->dev, "%s: signal x%x\n", __func__, ++ dev_dbg(&port->dev, "%s: signal 0x%x\n", __func__, + signals); + + old_dcd_state = portdata->dcd_state; +- portdata->cts_state = 1; ++ /* Note: CTS from modem is in reverse logic! */ ++ portdata->cts_state = ((signals & 0x100) ? 0 : 1); + portdata->dcd_state = ((signals & 0x01) ? 1 : 0); + portdata->dsr_state = ((signals & 0x02) ? 1 : 0); + portdata->ri_state = ((signals & 0x08) ? 1 : 0); +@@ -636,19 +818,20 @@ static void sierra_instat_callback(struc + tty_hangup(tty); + tty_kref_put(tty); + } else { +- dev_dbg(&port->dev, "%s: type %x req %x\n", +- __func__, req_pkt->bRequestType, +- req_pkt->bRequest); ++ /* dump the data we don't understand to log */ ++ usb_serial_debug_data(1, &port->dev, __func__, ++ urb->actual_length, urb->transfer_buffer); + } + } else + dev_dbg(&port->dev, "%s: error %d\n", __func__, status); + + /* Resubmit urb so we continue receiving IRQ data */ +- if (port->port.count && status != -ESHUTDOWN && status != -ENOENT) { ++ if (port->port.count && ++ status != -ESHUTDOWN && status != -ENOENT && status != -ENODEV) { + usb_mark_last_busy(serial->dev); + urb->dev = serial->dev; + err = usb_submit_urb(urb, GFP_ATOMIC); +- if (err) ++ if (err && err != -ENODEV) + dev_err(&port->dev, "%s: resubmit intr urb " + "failed. (%d)\n", __func__, err); + } +@@ -659,20 +842,21 @@ static int sierra_write_room(struct tty_ + struct usb_serial_port *port = tty->driver_data; + struct sierra_port_private *portdata = usb_get_serial_port_data(port); + unsigned long flags; ++ int retval; + + dev_dbg(&port->dev, "%s - port %d\n", __func__, port->number); + + /* try to give a good number back based on if we have any free urbs at + * this point in time */ ++ retval = MAX_TRANSFER; ++ + spin_lock_irqsave(&portdata->lock, flags); +- if (portdata->outstanding_urbs > N_OUT_URB * 2 / 3) { +- spin_unlock_irqrestore(&portdata->lock, flags); +- dev_dbg(&port->dev, "%s - write limit hit\n", __func__); +- return 0; ++ if (portdata->outstanding_urbs >= portdata->num_out_urbs) { ++ retval = 0; + } + spin_unlock_irqrestore(&portdata->lock, flags); + +- return 2048; ++ return retval; + } + + static void sierra_stop_rx_urbs(struct usb_serial_port *port) +@@ -680,7 +864,7 @@ static void sierra_stop_rx_urbs(struct u + int i; + struct sierra_port_private *portdata = usb_get_serial_port_data(port); + +- for (i = 0; i < ARRAY_SIZE(portdata->in_urbs); i++) ++ for (i = 0; i < portdata->num_in_urbs; i++) + usb_kill_urb(portdata->in_urbs[i]); + + usb_kill_urb(port->interrupt_in_urb); +@@ -695,10 +879,11 @@ static int sierra_submit_rx_urbs(struct + struct sierra_port_private *portdata = usb_get_serial_port_data(port); + + ok_cnt = 0; +- for (i = 0; i < ARRAY_SIZE(portdata->in_urbs); i++) { ++ for (i = 0; i < portdata->num_in_urbs; i++) { + urb = portdata->in_urbs[i]; + if (!urb) + continue; ++ urb->transfer_flags |= URB_FREE_BUFFER; + err = usb_submit_urb(urb, mem_flags); + if (err) { + dev_err(&port->dev, "%s: submit urb failed: %d\n", +@@ -760,41 +945,46 @@ static struct urb *sierra_setup_urb(stru + + return urb; + } +- + static void sierra_close(struct usb_serial_port *port) + { + int i; ++ struct urb *urb; + struct usb_serial *serial = port->serial; + struct sierra_port_private *portdata; + struct sierra_intf_private *intfdata = port->serial->private; + +- + dev_dbg(&port->dev, "%s\n", __func__); + portdata = usb_get_serial_port_data(port); + + portdata->rts_state = 0; + portdata->dtr_state = 0; + ++ usb_autopm_get_interface(serial->interface); ++ + if (serial->dev) { + mutex_lock(&serial->disc_mutex); +- if (!serial->disconnected) { +- serial->interface->needs_remote_wakeup = 0; +- usb_autopm_get_interface(serial->interface); ++ if (!serial->disconnected) + sierra_send_setup(port); +- } + mutex_unlock(&serial->disc_mutex); + spin_lock_irq(&intfdata->susp_lock); + portdata->opened = 0; + spin_unlock_irq(&intfdata->susp_lock); + +- + /* Stop reading urbs */ + sierra_stop_rx_urbs(port); + /* .. and release them */ +- for (i = 0; i < N_IN_URB; i++) { ++ for (i = 0; i < portdata->num_in_urbs; i++) { + sierra_release_urb(portdata->in_urbs[i]); + portdata->in_urbs[i] = NULL; + } ++ while((urb = usb_get_from_anchor(&portdata->delayed))) { ++ sierra_release_urb(urb); ++ usb_autopm_put_interface(serial->interface); ++ } ++ /* wait for active to finish */ ++ usb_wait_anchor_empty_timeout(&portdata->active, 500); ++ usb_kill_anchored_urbs(&portdata->active); ++ + } + } + +@@ -818,7 +1008,7 @@ static int sierra_open(struct tty_struct + + + endpoint = port->bulk_in_endpointAddress; +- for (i = 0; i < ARRAY_SIZE(portdata->in_urbs); i++) { ++ for (i = 0; i < portdata->num_in_urbs; i++) { + urb = sierra_setup_urb(serial, endpoint, USB_DIR_IN, port, + IN_BUFLEN, GFP_KERNEL, + sierra_indat_callback); +@@ -828,6 +1018,11 @@ static int sierra_open(struct tty_struct + usb_clear_halt(serial->dev, + usb_sndbulkpipe(serial->dev, endpoint) | USB_DIR_IN); + ++ /* reset outstanding out urbs counter */ ++ spin_lock_irq(&portdata->lock); ++ portdata->outstanding_urbs = 0; ++ spin_unlock_irq(&portdata->lock); ++ + err = sierra_submit_rx_urbs(port, GFP_KERNEL); + if (err) { + /* get rid of everything as in close */ +@@ -838,7 +1033,6 @@ static int sierra_open(struct tty_struct + } + sierra_send_setup(port); + +- serial->interface->needs_remote_wakeup = 1; + spin_lock_irq(&intfdata->susp_lock); + portdata->opened = 1; + spin_unlock_irq(&intfdata->susp_lock); +@@ -847,7 +1041,6 @@ static int sierra_open(struct tty_struct + return 0; + } + +- + static void sierra_dtr_rts(struct usb_serial_port *port, int on) + { + struct usb_serial *serial = port->serial; +@@ -867,9 +1060,13 @@ static void sierra_dtr_rts(struct usb_se + + static int sierra_startup(struct usb_serial *serial) + { +- struct usb_serial_port *port; +- struct sierra_port_private *portdata; ++ struct usb_serial_port *port = NULL; ++ struct sierra_port_private *portdata = NULL; ++ struct sierra_iface_info *himemoryp = NULL; + int i; ++ u8 ifnum; ++ u16 fw_attr; ++ int result; + + dev_dbg(&serial->dev->dev, "%s\n", __func__); + +@@ -880,22 +1077,80 @@ static int sierra_startup(struct usb_ser + if (nmea) + sierra_vsc_set_nmea(serial->dev, 1); + +- /* Now setup per port private data */ +- for (i = 0; i < serial->num_ports; i++) { +- port = serial->port[i]; +- portdata = kzalloc(sizeof(*portdata), GFP_KERNEL); ++ if (serial->num_ports) { ++ /* Note: One big piece of memory is allocated for all ports ++ * private data in one shot. This memory is split into equal ++ * pieces for each port. ++ */ ++ portdata = (struct sierra_port_private *)kzalloc ++ (sizeof(*portdata) * serial->num_ports, GFP_KERNEL); + if (!portdata) { +- dev_dbg(&port->dev, "%s: kmalloc for " +- "sierra_port_private (%d) failed!.\n", +- __func__, i); ++ dev_dbg(&serial->dev->dev, "%s: No memory!\n", __func__); + return -ENOMEM; + } ++ } ++ ++ /* Now setup per port private data */ ++ for (i = 0; i < serial->num_ports; i++, portdata++) { ++ port = serial->port[i]; ++ /* Initialize selected members of private data because these ++ * may be referred to right away */ + spin_lock_init(&portdata->lock); + init_usb_anchor(&portdata->active); + init_usb_anchor(&portdata->delayed); ++ ++ portdata->cts_state = 1; ++ ++ ifnum = i; ++ /* Assume low memory requirements */ ++ portdata->num_out_urbs = N_OUT_URB; ++ portdata->num_in_urbs = N_IN_URB; ++ ++ /* Determine actual memory requirements */ ++ if (serial->num_ports == 1) { ++ /* Get interface number for composite device */ ++ ifnum = sierra_calc_interface(serial); ++ himemoryp = ++ (struct sierra_iface_info *)&typeB_interface_list; ++ if (is_himemory(ifnum, himemoryp)) { ++ portdata->num_out_urbs = N_OUT_URB_HM; ++ portdata->num_in_urbs = N_IN_URB_HM; ++ } ++ } ++ else { ++ himemoryp = ++ (struct sierra_iface_info *)&typeA_interface_list; ++ if (is_himemory(i, himemoryp)) { ++ portdata->num_out_urbs = N_OUT_URB_HM; ++ portdata->num_in_urbs = N_IN_URB_HM; ++ } ++ } ++ dev_dbg(&serial->dev->dev, ++ "Memory usage (urbs) interface #%d, in=%d, out=%d\n", ++ ifnum,portdata->num_in_urbs, portdata->num_out_urbs ); + /* Set the port private data pointer */ + usb_set_serial_port_data(port, portdata); + } ++ serial->interface->needs_remote_wakeup = 1; ++ usb_autopm_disable(serial->interface); ++ ++ result = sierra_get_fw_attr(serial->dev, &fw_attr); ++ if (result == sizeof(fw_attr) && (fw_attr & SWI_FW_ATTR_PM_MASK) ) { ++ dev_info(&serial->dev->dev, ++ "APM supported, enabling autosuspend.\n"); ++ usb_autopm_enable(serial->interface); ++/******************************************************************************* ++ * If you want the default /sys/bus/usb/devices/.../.../power/level to be forced ++ * to auto, the following needs to be compiled in. ++ * Other combinations may be used for other default values (see ++ * drivers/usb/core/sysfs.c function set_level. ++ */ ++#ifdef POWER_LEVEL_AUTO ++ /* make power level default be 'auto' */ ++ serial->dev->autoresume_disabled = 0; ++ serial->dev->autosuspend_disabled = 0; ++#endif ++ } + + return 0; + } +@@ -904,19 +1159,29 @@ static void sierra_release(struct usb_se + { + int i; + struct usb_serial_port *port; +- struct sierra_port_private *portdata; ++ struct sierra_intf_private *intfdata = serial->private; + + dev_dbg(&serial->dev->dev, "%s\n", __func__); + ++ if (serial->num_ports > 0) { ++ port = serial->port[0]; ++ if (port) ++ /* Note: The entire piece of memory that was allocated ++ * in the startup routine can be released by passing ++ * a pointer to the beginning of the piece. ++ * This address corresponds to the address of the chunk ++ * that was given to port 0. ++ */ ++ kfree(usb_get_serial_port_data(port)); ++ } ++ + for (i = 0; i < serial->num_ports; ++i) { + port = serial->port[i]; + if (!port) + continue; +- portdata = usb_get_serial_port_data(port); +- if (!portdata) +- continue; +- kfree(portdata); ++ usb_set_serial_port_data(port, NULL); + } ++ kfree(intfdata); + } + + #ifdef CONFIG_PM +@@ -938,21 +1203,21 @@ static void stop_read_write_urbs(struct + static int sierra_suspend(struct usb_serial *serial, pm_message_t message) + { + struct sierra_intf_private *intfdata; +- int b; + +- if (serial->dev->auto_pm) { +- intfdata = serial->private; +- spin_lock_irq(&intfdata->susp_lock); +- b = intfdata->in_flight; ++ dev_dbg(&serial->dev->dev, "%s\n", __func__); ++ ++ intfdata = serial->private; ++ spin_lock_irq(&intfdata->susp_lock); + +- if (b) { ++ if (serial->dev->auto_pm) { ++ if (intfdata->in_flight) { + spin_unlock_irq(&intfdata->susp_lock); + return -EBUSY; +- } else { +- intfdata->suspended = 1; +- spin_unlock_irq(&intfdata->susp_lock); + } + } ++ intfdata->suspended = 1; ++ spin_unlock_irq(&intfdata->susp_lock); ++ + stop_read_write_urbs(serial); + + return 0; +@@ -966,22 +1231,35 @@ static int sierra_resume(struct usb_seri + struct urb *urb; + int ec = 0; + int i, err; ++ int len; ++ int failed_submits; + ++ dev_dbg(&serial->dev->dev, "%s\n", __func__); ++ + spin_lock_irq(&intfdata->susp_lock); + for (i = 0; i < serial->num_ports; i++) { + port = serial->port[i]; + portdata = usb_get_serial_port_data(port); +- ++ failed_submits = 0; + while ((urb = usb_get_from_anchor(&portdata->delayed))) { + usb_anchor_urb(urb, &portdata->active); + intfdata->in_flight++; ++ len = urb->transfer_buffer_length; + err = usb_submit_urb(urb, GFP_ATOMIC); + if (err < 0) { + intfdata->in_flight--; + usb_unanchor_urb(urb); +- usb_scuttle_anchored_urbs(&portdata->delayed); +- break; ++ failed_submits++; ++ atomic_inc(&intfdata->stats.delayed_write_err); ++ /* fix pm_usage_cnt */ ++ usb_autopm_put_interface_async( ++ port->serial->interface); ++ } else { ++ atomic_inc(&intfdata->stats.delayed_writes); ++ atomic_add(len, &intfdata->stats.tx_bytes); + } ++ /* release urb - usb_get_from_anchor increased kref */ ++ usb_free_urb(urb); + } + + if (portdata->opened) { +@@ -989,6 +1267,14 @@ static int sierra_resume(struct usb_seri + if (err) + ec++; + } ++ if (failed_submits) { ++ /* fix outstanding_urbs counter */ ++ spin_lock(&portdata->lock); /* assuming irq disabled */ ++ portdata->outstanding_urbs -= failed_submits; ++ spin_unlock(&portdata->lock); ++ /* unblock a writer */ ++ usb_serial_port_softint(port); ++ } + } + intfdata->suspended = 0; + spin_unlock_irq(&intfdata->susp_lock); +@@ -1000,6 +1286,27 @@ static int sierra_resume(struct usb_seri + #define sierra_resume NULL + #endif + ++static int sierra_reset_resume(struct usb_interface *intf) ++{ ++ struct usb_serial *serial = usb_get_intfdata(intf); ++ dev_err(&serial->dev->dev, "%s\n", __func__); ++ return usb_serial_resume(intf); ++} ++ ++static struct usb_driver sierra_driver = { ++ .name = "sierra", ++ .probe = usb_serial_probe, ++ .disconnect = usb_serial_disconnect, ++ .suspend = usb_serial_suspend, ++ .resume = usb_serial_resume, ++ .reset_resume = sierra_reset_resume, ++ .id_table = id_table, ++ ++ .no_dynamic_id = 1, ++ .supports_autosuspend = 1, ++}; ++ ++ + static struct usb_serial_driver sierra_device = { + .driver = { + .owner = THIS_MODULE, +@@ -1020,9 +1327,12 @@ static struct usb_serial_driver sierra_d + .tiocmset = sierra_tiocmset, + .attach = sierra_startup, + .release = sierra_release, +- .suspend = sierra_suspend, +- .resume = sierra_resume, ++ .port_probe = sierra_create_sysfs_attrs, ++ .port_remove = sierra_remove_sysfs_attrs, ++ .suspend = sierra_suspend, ++ .resume = sierra_resume, + .read_int_callback = sierra_instat_callback, ++ + }; + + /* Functions used by new usb-serial code. */ +@@ -1033,7 +1343,6 @@ static int __init sierra_init(void) + if (retval) + goto failed_device_register; + +- + retval = usb_register(&sierra_driver); + if (retval) + goto failed_driver_register; |